[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/clk/clk-vt8500.c b/src/kernel/linux/v4.14/drivers/clk/clk-vt8500.c
new file mode 100644
index 0000000..4161a6f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/clk-vt8500.c
@@ -0,0 +1,753 @@
+/*
+ * Clock implementation for VIA/Wondermedia SoC's
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+#define LEGACY_PMC_BASE 0xD8130000
+
+/* All clocks share the same lock as none can be changed concurrently */
+static DEFINE_SPINLOCK(_lock);
+
+struct clk_device {
+ struct clk_hw hw;
+ void __iomem *div_reg;
+ unsigned int div_mask;
+ void __iomem *en_reg;
+ int en_bit;
+ spinlock_t *lock;
+};
+
+/*
+ * Add new PLL_TYPE_x definitions here as required. Use the first known model
+ * to support the new type as the name.
+ * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and
+ * vtwm_pll_set_rate() to handle the new PLL_TYPE_x
+ */
+
+#define PLL_TYPE_VT8500 0
+#define PLL_TYPE_WM8650 1
+#define PLL_TYPE_WM8750 2
+#define PLL_TYPE_WM8850 3
+
+struct clk_pll {
+ struct clk_hw hw;
+ void __iomem *reg;
+ spinlock_t *lock;
+ int type;
+};
+
+static void __iomem *pmc_base;
+
+static __init void vtwm_set_pmc_base(void)
+{
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+
+ if (np)
+ pmc_base = of_iomap(np, 0);
+ else
+ pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+ of_node_put(np);
+
+ if (!pmc_base)
+ pr_err("%s:of_iomap(pmc) failed\n", __func__);
+}
+
+#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
+
+#define VT8500_PMC_BUSY_MASK 0x18
+
+static void vt8500_pmc_wait_busy(void)
+{
+ while (readl(pmc_base) & VT8500_PMC_BUSY_MASK)
+ cpu_relax();
+}
+
+static int vt8500_dclk_enable(struct clk_hw *hw)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 en_val;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ en_val = readl(cdev->en_reg);
+ en_val |= BIT(cdev->en_bit);
+ writel(en_val, cdev->en_reg);
+
+ spin_unlock_irqrestore(cdev->lock, flags);
+ return 0;
+}
+
+static void vt8500_dclk_disable(struct clk_hw *hw)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 en_val;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ en_val = readl(cdev->en_reg);
+ en_val &= ~BIT(cdev->en_bit);
+ writel(en_val, cdev->en_reg);
+
+ spin_unlock_irqrestore(cdev->lock, flags);
+}
+
+static int vt8500_dclk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit));
+
+ return en_val ? 1 : 0;
+}
+
+static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 div = readl(cdev->div_reg) & cdev->div_mask;
+
+ /* Special case for SDMMC devices */
+ if ((cdev->div_mask == 0x3F) && (div & BIT(5)))
+ div = 64 * (div & 0x1f);
+
+ /* div == 0 is actually the highest divisor */
+ if (div == 0)
+ div = (cdev->div_mask + 1);
+
+ return parent_rate / div;
+}
+
+static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 divisor;
+
+ if (rate == 0)
+ return 0;
+
+ divisor = *prate / rate;
+
+ /* If prate / rate would be decimal, incr the divisor */
+ if (rate * divisor < *prate)
+ divisor++;
+
+ /*
+ * If this is a request for SDMMC we have to adjust the divisor
+ * when >31 to use the fixed predivisor
+ */
+ if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
+ divisor = 64 * ((divisor / 64) + 1);
+ }
+
+ return *prate / divisor;
+}
+
+static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_device *cdev = to_clk_device(hw);
+ u32 divisor;
+ unsigned long flags = 0;
+
+ if (rate == 0)
+ return 0;
+
+ divisor = parent_rate / rate;
+
+ if (divisor == cdev->div_mask + 1)
+ divisor = 0;
+
+ /* SDMMC mask may need to be corrected before testing if its valid */
+ if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
+ /*
+ * Bit 5 is a fixed /64 predivisor. If the requested divisor
+ * is >31 then correct for the fixed divisor being required.
+ */
+ divisor = 0x20 + (divisor / 64);
+ }
+
+ if (divisor > cdev->div_mask) {
+ pr_err("%s: invalid divisor for clock\n", __func__);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(cdev->lock, flags);
+
+ vt8500_pmc_wait_busy();
+ writel(divisor, cdev->div_reg);
+ vt8500_pmc_wait_busy();
+
+ spin_unlock_irqrestore(cdev->lock, flags);
+
+ return 0;
+}
+
+
+static const struct clk_ops vt8500_gated_clk_ops = {
+ .enable = vt8500_dclk_enable,
+ .disable = vt8500_dclk_disable,
+ .is_enabled = vt8500_dclk_is_enabled,
+};
+
+static const struct clk_ops vt8500_divisor_clk_ops = {
+ .round_rate = vt8500_dclk_round_rate,
+ .set_rate = vt8500_dclk_set_rate,
+ .recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+static const struct clk_ops vt8500_gated_divisor_clk_ops = {
+ .enable = vt8500_dclk_enable,
+ .disable = vt8500_dclk_disable,
+ .is_enabled = vt8500_dclk_is_enabled,
+ .round_rate = vt8500_dclk_round_rate,
+ .set_rate = vt8500_dclk_set_rate,
+ .recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+#define CLK_INIT_GATED BIT(0)
+#define CLK_INIT_DIVISOR BIT(1)
+#define CLK_INIT_GATED_DIVISOR (CLK_INIT_DIVISOR | CLK_INIT_GATED)
+
+static __init void vtwm_device_clk_init(struct device_node *node)
+{
+ u32 en_reg, div_reg;
+ struct clk_hw *hw;
+ struct clk_device *dev_clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init;
+ int rc;
+ int clk_init_flags = 0;
+
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
+ dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
+ if (WARN_ON(!dev_clk))
+ return;
+
+ dev_clk->lock = &_lock;
+
+ rc = of_property_read_u32(node, "enable-reg", &en_reg);
+ if (!rc) {
+ dev_clk->en_reg = pmc_base + en_reg;
+ rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit);
+ if (rc) {
+ pr_err("%s: enable-bit property required for gated clock\n",
+ __func__);
+ return;
+ }
+ clk_init_flags |= CLK_INIT_GATED;
+ }
+
+ rc = of_property_read_u32(node, "divisor-reg", &div_reg);
+ if (!rc) {
+ dev_clk->div_reg = pmc_base + div_reg;
+ /*
+ * use 0x1f as the default mask since it covers
+ * almost all the clocks and reduces dts properties
+ */
+ dev_clk->div_mask = 0x1f;
+
+ of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask);
+ clk_init_flags |= CLK_INIT_DIVISOR;
+ }
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ switch (clk_init_flags) {
+ case CLK_INIT_GATED:
+ init.ops = &vt8500_gated_clk_ops;
+ break;
+ case CLK_INIT_DIVISOR:
+ init.ops = &vt8500_divisor_clk_ops;
+ break;
+ case CLK_INIT_GATED_DIVISOR:
+ init.ops = &vt8500_gated_divisor_clk_ops;
+ break;
+ default:
+ pr_err("%s: Invalid clock description in device tree\n",
+ __func__);
+ kfree(dev_clk);
+ return;
+ }
+
+ init.name = clk_name;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ dev_clk->hw.init = &init;
+
+ hw = &dev_clk->hw;
+ rc = clk_hw_register(NULL, hw);
+ if (WARN_ON(rc)) {
+ kfree(dev_clk);
+ return;
+ }
+ rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw);
+ clk_hw_register_clkdev(hw, clk_name, NULL);
+}
+CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init);
+
+/* PLL clock related functions */
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Helper macros for PLL_VT8500 */
+#define VT8500_PLL_MUL(x) ((x & 0x1F) << 1)
+#define VT8500_PLL_DIV(x) ((x & 0x100) ? 1 : 2)
+
+#define VT8500_BITS_TO_FREQ(r, m, d) \
+ ((r / d) * m)
+
+#define VT8500_BITS_TO_VAL(m, d) \
+ ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F))
+
+/* Helper macros for PLL_WM8650 */
+#define WM8650_PLL_MUL(x) (x & 0x3FF)
+#define WM8650_PLL_DIV(x) (((x >> 10) & 7) * (1 << ((x >> 13) & 3)))
+
+#define WM8650_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * m / (d1 * (1 << d2)))
+
+#define WM8650_BITS_TO_VAL(m, d1, d2) \
+ ((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+
+/* Helper macros for PLL_WM8750 */
+#define WM8750_PLL_MUL(x) (((x >> 16) & 0xFF) + 1)
+#define WM8750_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 7)))
+
+#define WM8750_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * (m+1) / ((d1+1) * (1 << d2)))
+
+#define WM8750_BITS_TO_VAL(f, m, d1, d2) \
+ ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)
+
+/* Helper macros for PLL_WM8850 */
+#define WM8850_PLL_MUL(x) ((((x >> 16) & 0x7F) + 1) * 2)
+#define WM8850_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 3)))
+
+#define WM8850_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * ((m + 1) * 2) / ((d1+1) * (1 << d2)))
+
+#define WM8850_BITS_TO_VAL(m, d1, d2) \
+ ((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2)
+
+static int vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *multiplier, u32 *prediv)
+{
+ unsigned long tclk;
+
+ /* sanity check */
+ if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) {
+ pr_err("%s: requested rate out of range\n", __func__);
+ *multiplier = 0;
+ *prediv = 1;
+ return -EINVAL;
+ }
+ if (rate <= parent_rate * 31)
+ /* use the prediv to double the resolution */
+ *prediv = 2;
+ else
+ *prediv = 1;
+
+ *multiplier = rate / (parent_rate / *prediv);
+ tclk = (parent_rate / *prediv) * *multiplier;
+
+ if (tclk != rate)
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,
+ rate, tclk);
+
+ return 0;
+}
+
+/*
+ * M * parent [O1] => / P [O2] => / D [O3]
+ * Where O1 is 900MHz...3GHz;
+ * O2 is 600MHz >= (M * parent) / P >= 300MHz;
+ * M is 36...120 [25MHz parent]; D is 1 or 2 or 4 or 8.
+ * Possible ranges (O3):
+ * D = 8: 37,5MHz...75MHz
+ * D = 4: 75MHz...150MHz
+ * D = 2: 150MHz...300MHz
+ * D = 1: 300MHz...600MHz
+ */
+static int wm8650_find_pll_bits(unsigned long rate,
+ unsigned long parent_rate, u32 *multiplier, u32 *divisor1,
+ u32 *divisor2)
+{
+ unsigned long O1, min_err, rate_err;
+
+ if (!parent_rate || (rate < 37500000) || (rate > 600000000))
+ return -EINVAL;
+
+ *divisor2 = rate <= 75000000 ? 3 : rate <= 150000000 ? 2 :
+ rate <= 300000000 ? 1 : 0;
+ /*
+ * Divisor P cannot be calculated. Test all divisors and find where M
+ * will be as close as possible to the requested rate.
+ */
+ min_err = ULONG_MAX;
+ for (*divisor1 = 5; *divisor1 >= 3; (*divisor1)--) {
+ O1 = rate * *divisor1 * (1 << (*divisor2));
+ rate_err = O1 % parent_rate;
+ if (rate_err < min_err) {
+ *multiplier = O1 / parent_rate;
+ if (rate_err == 0)
+ return 0;
+
+ min_err = rate_err;
+ }
+ }
+
+ if ((*multiplier < 3) || (*multiplier > 1023))
+ return -EINVAL;
+
+ pr_warn("%s: rate error is %lu\n", __func__, min_err);
+
+ return 0;
+}
+
+static u32 wm8750_get_filter(u32 parent_rate, u32 divisor1)
+{
+ /* calculate frequency (MHz) after pre-divisor */
+ u32 freq = (parent_rate / 1000000) / (divisor1 + 1);
+
+ if ((freq < 10) || (freq > 200))
+ pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n",
+ __func__, freq);
+
+ if (freq >= 166)
+ return 7;
+ else if (freq >= 104)
+ return 6;
+ else if (freq >= 65)
+ return 5;
+ else if (freq >= 42)
+ return 4;
+ else if (freq >= 26)
+ return 3;
+ else if (freq >= 16)
+ return 2;
+ else if (freq >= 10)
+ return 1;
+
+ return 0;
+}
+
+static int wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *filter, u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+ u32 mul;
+ int div1, div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 1; div1 >= 0; div1--)
+ for (div2 = 7; div2 >= 0; div2--)
+ for (mul = 0; mul <= 255; mul++) {
+ tclk = parent_rate * (mul + 1) / ((div1 + 1) * (1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *filter = wm8750_get_filter(parent_rate, div1);
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return 0;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ }
+ }
+
+ if (best_err == (unsigned long)-1) {
+ pr_warn("%s: impossible rate %lu\n", __func__, rate);
+ return -EINVAL;
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+
+ *filter = wm8750_get_filter(parent_rate, *divisor1);
+
+ return 0;
+}
+
+static int wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+ u32 mul;
+ int div1, div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 1; div1 >= 0; div1--)
+ for (div2 = 3; div2 >= 0; div2--)
+ for (mul = 0; mul <= 127; mul++) {
+ tclk = parent_rate * ((mul + 1) * 2) /
+ ((div1 + 1) * (1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return 0;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ }
+ }
+
+ if (best_err == (unsigned long)-1) {
+ pr_warn("%s: impossible rate %lu\n", __func__, rate);
+ return -EINVAL;
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+
+ return 0;
+}
+
+static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 filter, mul, div1, div2;
+ u32 pll_val;
+ unsigned long flags = 0;
+ int ret;
+
+ /* sanity check */
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ ret = vt8500_find_pll_bits(rate, parent_rate, &mul, &div1);
+ if (!ret)
+ pll_val = VT8500_BITS_TO_VAL(mul, div1);
+ break;
+ case PLL_TYPE_WM8650:
+ ret = wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+ if (!ret)
+ pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
+ break;
+ case PLL_TYPE_WM8750:
+ ret = wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
+ if (!ret)
+ pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
+ break;
+ case PLL_TYPE_WM8850:
+ ret = wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+ if (!ret)
+ pll_val = WM8850_BITS_TO_VAL(mul, div1, div2);
+ break;
+ default:
+ pr_err("%s: invalid pll type\n", __func__);
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(pll->lock, flags);
+
+ vt8500_pmc_wait_busy();
+ writel(pll_val, pll->reg);
+ vt8500_pmc_wait_busy();
+
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return 0;
+}
+
+static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 filter, mul, div1, div2;
+ long round_rate;
+ int ret;
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ ret = vt8500_find_pll_bits(rate, *prate, &mul, &div1);
+ if (!ret)
+ round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1);
+ break;
+ case PLL_TYPE_WM8650:
+ ret = wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+ if (!ret)
+ round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
+ break;
+ case PLL_TYPE_WM8750:
+ ret = wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
+ if (!ret)
+ round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
+ break;
+ case PLL_TYPE_WM8850:
+ ret = wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+ if (!ret)
+ round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ return round_rate;
+}
+
+static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 pll_val = readl(pll->reg);
+ unsigned long pll_freq;
+
+ switch (pll->type) {
+ case PLL_TYPE_VT8500:
+ pll_freq = parent_rate * VT8500_PLL_MUL(pll_val);
+ pll_freq /= VT8500_PLL_DIV(pll_val);
+ break;
+ case PLL_TYPE_WM8650:
+ pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
+ pll_freq /= WM8650_PLL_DIV(pll_val);
+ break;
+ case PLL_TYPE_WM8750:
+ pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
+ pll_freq /= WM8750_PLL_DIV(pll_val);
+ break;
+ case PLL_TYPE_WM8850:
+ pll_freq = parent_rate * WM8850_PLL_MUL(pll_val);
+ pll_freq /= WM8850_PLL_DIV(pll_val);
+ break;
+ default:
+ pll_freq = 0;
+ }
+
+ return pll_freq;
+}
+
+static const struct clk_ops vtwm_pll_ops = {
+ .round_rate = vtwm_pll_round_rate,
+ .set_rate = vtwm_pll_set_rate,
+ .recalc_rate = vtwm_pll_recalc_rate,
+};
+
+static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
+{
+ u32 reg;
+ struct clk_hw *hw;
+ struct clk_pll *pll_clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init;
+ int rc;
+
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
+ rc = of_property_read_u32(node, "reg", ®);
+ if (WARN_ON(rc))
+ return;
+
+ pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+ if (WARN_ON(!pll_clk))
+ return;
+
+ pll_clk->reg = pmc_base + reg;
+ pll_clk->lock = &_lock;
+ pll_clk->type = pll_type;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ init.name = clk_name;
+ init.ops = &vtwm_pll_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll_clk->hw.init = &init;
+
+ hw = &pll_clk->hw;
+ rc = clk_hw_register(NULL, &pll_clk->hw);
+ if (WARN_ON(rc)) {
+ kfree(pll_clk);
+ return;
+ }
+ rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw);
+ clk_hw_register_clkdev(hw, clk_name, NULL);
+}
+
+
+/* Wrappers for initialization functions */
+
+static void __init vt8500_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
+}
+CLK_OF_DECLARE(vt8500_pll, "via,vt8500-pll-clock", vt8500_pll_init);
+
+static void __init wm8650_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
+}
+CLK_OF_DECLARE(wm8650_pll, "wm,wm8650-pll-clock", wm8650_pll_init);
+
+static void __init wm8750_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8750);
+}
+CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init);
+
+static void __init wm8850_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
+}
+CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);