[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/Kconfig b/src/kernel/linux/v4.14/drivers/clk/uniphier/Kconfig
new file mode 100644
index 0000000..5512377
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/Kconfig
@@ -0,0 +1,9 @@
+config CLK_UNIPHIER
+ bool "Clock driver for UniPhier SoCs"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && MFD_SYSCON
+ default ARCH_UNIPHIER
+ help
+ Support for clock controllers on UniPhier SoCs.
+ Say Y if you want to control clocks provided by System Control
+ block, Media I/O block, Peripheral Block.
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/Makefile b/src/kernel/linux/v4.14/drivers/clk/uniphier/Makefile
new file mode 100644
index 0000000..e5715ab
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += clk-uniphier-core.o
+
+obj-y += clk-uniphier-cpugear.o
+obj-y += clk-uniphier-fixed-factor.o
+obj-y += clk-uniphier-fixed-rate.o
+obj-y += clk-uniphier-gate.o
+obj-y += clk-uniphier-mux.o
+
+obj-y += clk-uniphier-sys.o
+obj-y += clk-uniphier-mio.o
+obj-y += clk-uniphier-peri.o
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-core.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-core.c
new file mode 100644
index 0000000..e09f3dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-core.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-uniphier.h"
+
+static struct clk_hw *uniphier_clk_register(struct device *dev,
+ struct regmap *regmap,
+ const struct uniphier_clk_data *data)
+{
+ switch (data->type) {
+ case UNIPHIER_CLK_TYPE_CPUGEAR:
+ return uniphier_clk_register_cpugear(dev, regmap, data->name,
+ &data->data.cpugear);
+ case UNIPHIER_CLK_TYPE_FIXED_FACTOR:
+ return uniphier_clk_register_fixed_factor(dev, data->name,
+ &data->data.factor);
+ case UNIPHIER_CLK_TYPE_FIXED_RATE:
+ return uniphier_clk_register_fixed_rate(dev, data->name,
+ &data->data.rate);
+ case UNIPHIER_CLK_TYPE_GATE:
+ return uniphier_clk_register_gate(dev, regmap, data->name,
+ &data->data.gate);
+ case UNIPHIER_CLK_TYPE_MUX:
+ return uniphier_clk_register_mux(dev, regmap, data->name,
+ &data->data.mux);
+ default:
+ dev_err(dev, "unsupported clock type\n");
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+static int uniphier_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk_hw_onecell_data *hw_data;
+ const struct uniphier_clk_data *p, *data;
+ struct regmap *regmap;
+ struct device_node *parent;
+ int clk_num = 0;
+
+ data = of_device_get_match_data(dev);
+ if (WARN_ON(!data))
+ return -EINVAL;
+
+ parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+ regmap = syscon_node_to_regmap(parent);
+ of_node_put(parent);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap (error %ld)\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ for (p = data; p->name; p++)
+ clk_num = max(clk_num, p->idx + 1);
+
+ hw_data = devm_kzalloc(dev,
+ sizeof(*hw_data) + clk_num * sizeof(struct clk_hw *),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ hw_data->num = clk_num;
+
+ /* avoid returning NULL for unused idx */
+ while (--clk_num >= 0)
+ hw_data->hws[clk_num] = ERR_PTR(-EINVAL);
+
+ for (p = data; p->name; p++) {
+ struct clk_hw *hw;
+
+ dev_dbg(dev, "register %s (index=%d)\n", p->name, p->idx);
+ hw = uniphier_clk_register(dev, regmap, p);
+ if (WARN(IS_ERR(hw), "failed to register %s", p->name))
+ continue;
+
+ if (p->idx >= 0)
+ hw_data->hws[p->idx] = hw;
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ hw_data);
+}
+
+static int uniphier_clk_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id uniphier_clk_match[] = {
+ /* System clock */
+ {
+ .compatible = "socionext,uniphier-ld4-clock",
+ .data = uniphier_ld4_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-clock",
+ .data = uniphier_pro4_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-clock",
+ .data = uniphier_sld8_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-clock",
+ .data = uniphier_pro5_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-clock",
+ .data = uniphier_pxs2_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-clock",
+ .data = uniphier_ld11_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-clock",
+ .data = uniphier_ld20_sys_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-clock",
+ .data = uniphier_pxs3_sys_clk_data,
+ },
+ /* Media I/O clock, SD clock */
+ {
+ .compatible = "socionext,uniphier-ld4-mio-clock",
+ .data = uniphier_ld4_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-mio-clock",
+ .data = uniphier_ld4_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-mio-clock",
+ .data = uniphier_ld4_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-sd-clock",
+ .data = uniphier_pro5_sd_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-sd-clock",
+ .data = uniphier_pro5_sd_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-mio-clock",
+ .data = uniphier_ld4_mio_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-sd-clock",
+ .data = uniphier_pro5_sd_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-sd-clock",
+ .data = uniphier_pro5_sd_clk_data,
+ },
+ /* Peripheral clock */
+ {
+ .compatible = "socionext,uniphier-ld4-peri-clock",
+ .data = uniphier_ld4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro4-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-sld8-peri-clock",
+ .data = uniphier_ld4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-peri-clock",
+ .data = uniphier_pro4_peri_clk_data,
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver uniphier_clk_driver = {
+ .probe = uniphier_clk_probe,
+ .remove = uniphier_clk_remove,
+ .driver = {
+ .name = "uniphier-clk",
+ .of_match_table = uniphier_clk_match,
+ },
+};
+builtin_platform_driver(uniphier_clk_driver);
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-cpugear.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-cpugear.c
new file mode 100644
index 0000000..5d2d42b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-cpugear.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_CLK_CPUGEAR_STAT 0 /* status */
+#define UNIPHIER_CLK_CPUGEAR_SET 4 /* set */
+#define UNIPHIER_CLK_CPUGEAR_UPD 8 /* update */
+#define UNIPHIER_CLK_CPUGEAR_UPD_BIT BIT(0)
+
+struct uniphier_clk_cpugear {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int regbase;
+ unsigned int mask;
+};
+
+#define to_uniphier_clk_cpugear(_hw) \
+ container_of(_hw, struct uniphier_clk_cpugear, hw)
+
+static int uniphier_clk_cpugear_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+ int ret;
+ unsigned int val;
+
+ ret = regmap_write_bits(gear->regmap,
+ gear->regbase + UNIPHIER_CLK_CPUGEAR_SET,
+ gear->mask, index);
+ if (ret)
+ return ret;
+
+ ret = regmap_write_bits(gear->regmap,
+ gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+ UNIPHIER_CLK_CPUGEAR_UPD_BIT,
+ UNIPHIER_CLK_CPUGEAR_UPD_BIT);
+ if (ret)
+ return ret;
+
+ return regmap_read_poll_timeout(gear->regmap,
+ gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+ val, !(val & UNIPHIER_CLK_CPUGEAR_UPD_BIT),
+ 0, 1);
+}
+
+static u8 uniphier_clk_cpugear_get_parent(struct clk_hw *hw)
+{
+ struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(gear->regmap,
+ gear->regbase + UNIPHIER_CLK_CPUGEAR_STAT, &val);
+ if (ret)
+ return ret;
+
+ val &= gear->mask;
+
+ return val < num_parents ? val : -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_cpugear_ops = {
+ .determine_rate = __clk_mux_determine_rate,
+ .set_parent = uniphier_clk_cpugear_set_parent,
+ .get_parent = uniphier_clk_cpugear_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_cpugear_data *data)
+{
+ struct uniphier_clk_cpugear *gear;
+ struct clk_init_data init;
+ int ret;
+
+ gear = devm_kzalloc(dev, sizeof(*gear), GFP_KERNEL);
+ if (!gear)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &uniphier_clk_cpugear_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = data->parent_names;
+ init.num_parents = data->num_parents,
+
+ gear->regmap = regmap;
+ gear->regbase = data->regbase;
+ gear->mask = data->mask;
+ gear->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &gear->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &gear->hw;
+}
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-factor.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-factor.c
new file mode 100644
index 0000000..da2d9f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-factor.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+ const char *name,
+ const struct uniphier_clk_fixed_factor_data *data)
+{
+ struct clk_fixed_factor *fix;
+ struct clk_init_data init;
+ int ret;
+
+ fix = devm_kzalloc(dev, sizeof(*fix), GFP_KERNEL);
+ if (!fix)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixed_factor_ops;
+ init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+ init.parent_names = data->parent_name ? &data->parent_name : NULL;
+ init.num_parents = data->parent_name ? 1 : 0;
+
+ fix->mult = data->mult;
+ fix->div = data->div;
+ fix->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &fix->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &fix->hw;
+}
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-rate.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
new file mode 100644
index 0000000..0ad0d46
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+ const char *name,
+ const struct uniphier_clk_fixed_rate_data *data)
+{
+ struct clk_fixed_rate *fixed;
+ struct clk_init_data init;
+ int ret;
+
+ /* allocate fixed-rate clock */
+ fixed = devm_kzalloc(dev, sizeof(*fixed), GFP_KERNEL);
+ if (!fixed)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixed_rate_ops;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+
+ fixed->fixed_rate = data->fixed_rate;
+ fixed->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &fixed->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &fixed->hw;
+}
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-gate.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-gate.c
new file mode 100644
index 0000000..49142d4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-gate.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_gate {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int reg;
+ unsigned int bit;
+};
+
+#define to_uniphier_clk_gate(_hw) \
+ container_of(_hw, struct uniphier_clk_gate, hw)
+
+static int uniphier_clk_gate_endisable(struct clk_hw *hw, int enable)
+{
+ struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+
+ return regmap_write_bits(gate->regmap, gate->reg, BIT(gate->bit),
+ enable ? BIT(gate->bit) : 0);
+}
+
+static int uniphier_clk_gate_enable(struct clk_hw *hw)
+{
+ return uniphier_clk_gate_endisable(hw, 1);
+}
+
+static void uniphier_clk_gate_disable(struct clk_hw *hw)
+{
+ if (uniphier_clk_gate_endisable(hw, 0) < 0)
+ pr_warn("failed to disable clk\n");
+}
+
+static int uniphier_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+ unsigned int val;
+
+ if (regmap_read(gate->regmap, gate->reg, &val) < 0)
+ pr_warn("is_enabled() may return wrong result\n");
+
+ return !!(val & BIT(gate->bit));
+}
+
+static const struct clk_ops uniphier_clk_gate_ops = {
+ .enable = uniphier_clk_gate_enable,
+ .disable = uniphier_clk_gate_disable,
+ .is_enabled = uniphier_clk_gate_is_enabled,
+};
+
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_gate_data *data)
+{
+ struct uniphier_clk_gate *gate;
+ struct clk_init_data init;
+ int ret;
+
+ gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &uniphier_clk_gate_ops;
+ init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+ init.parent_names = data->parent_name ? &data->parent_name : NULL;
+ init.num_parents = data->parent_name ? 1 : 0;
+
+ gate->regmap = regmap;
+ gate->reg = data->reg;
+ gate->bit = data->bit;
+ gate->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &gate->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &gate->hw;
+}
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mio.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mio.c
new file mode 100644
index 0000000..16e4d30
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mio.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_MIO_CLK_SD_FIXED \
+ UNIPHIER_CLK_FACTOR("sd-44m", -1, "sd-133m", 1, 3), \
+ UNIPHIER_CLK_FACTOR("sd-33m", -1, "sd-200m", 1, 6), \
+ UNIPHIER_CLK_FACTOR("sd-50m", -1, "sd-200m", 1, 4), \
+ UNIPHIER_CLK_FACTOR("sd-67m", -1, "sd-200m", 1, 3), \
+ UNIPHIER_CLK_FACTOR("sd-100m", -1, "sd-200m", 1, 2), \
+ UNIPHIER_CLK_FACTOR("sd-40m", -1, "sd-200m", 1, 5), \
+ UNIPHIER_CLK_FACTOR("sd-25m", -1, "sd-200m", 1, 8), \
+ UNIPHIER_CLK_FACTOR("sd-22m", -1, "sd-133m", 1, 6)
+
+#define UNIPHIER_MIO_CLK_SD(_idx, ch) \
+ { \
+ .name = "sd" #ch "-sel", \
+ .type = UNIPHIER_CLK_TYPE_MUX, \
+ .idx = -1, \
+ .data.mux = { \
+ .parent_names = { \
+ "sd-44m", \
+ "sd-33m", \
+ "sd-50m", \
+ "sd-67m", \
+ "sd-100m", \
+ "sd-40m", \
+ "sd-25m", \
+ "sd-22m", \
+ }, \
+ .num_parents = 8, \
+ .reg = 0x30 + 0x200 * (ch), \
+ .masks = { \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ }, \
+ .vals = { \
+ 0x00000000, \
+ 0x00010000, \
+ 0x00020000, \
+ 0x00030000, \
+ 0x00001000, \
+ 0x00001100, \
+ 0x00001200, \
+ 0x00001300, \
+ }, \
+ }, \
+ }, \
+ UNIPHIER_CLK_GATE("sd" #ch, (_idx), "sd" #ch "-sel", 0x20 + 0x200 * (ch), 8)
+
+#define UNIPHIER_MIO_CLK_USB2(idx, ch) \
+ UNIPHIER_CLK_GATE("usb2" #ch, (idx), "usb2", 0x20 + 0x200 * (ch), 28)
+
+#define UNIPHIER_MIO_CLK_USB2_PHY(idx, ch) \
+ UNIPHIER_CLK_GATE("usb2" #ch "-phy", (idx), "usb2", 0x20 + 0x200 * (ch), 29)
+
+#define UNIPHIER_MIO_CLK_DMAC(idx) \
+ UNIPHIER_CLK_GATE("miodmac", (idx), "stdmac", 0x20, 25)
+
+const struct uniphier_clk_data uniphier_ld4_mio_clk_data[] = {
+ UNIPHIER_MIO_CLK_SD_FIXED,
+ UNIPHIER_MIO_CLK_SD(0, 0),
+ UNIPHIER_MIO_CLK_SD(1, 1),
+ UNIPHIER_MIO_CLK_SD(2, 2),
+ UNIPHIER_MIO_CLK_DMAC(7),
+ UNIPHIER_MIO_CLK_USB2(8, 0),
+ UNIPHIER_MIO_CLK_USB2(9, 1),
+ UNIPHIER_MIO_CLK_USB2(10, 2),
+ UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
+ UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
+ UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sd_clk_data[] = {
+ UNIPHIER_MIO_CLK_SD_FIXED,
+ UNIPHIER_MIO_CLK_SD(0, 0),
+ UNIPHIER_MIO_CLK_SD(1, 1),
+ { /* sentinel */ }
+};
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mux.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mux.c
new file mode 100644
index 0000000..2c243a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-mux.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_mux {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int reg;
+ const unsigned int *masks;
+ const unsigned int *vals;
+};
+
+#define to_uniphier_clk_mux(_hw) container_of(_hw, struct uniphier_clk_mux, hw)
+
+static int uniphier_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+
+ return regmap_write_bits(mux->regmap, mux->reg, mux->masks[index],
+ mux->vals[index]);
+}
+
+static u8 uniphier_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
+ int ret;
+ unsigned int val;
+ u8 i;
+
+ ret = regmap_read(mux->regmap, mux->reg, &val);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num_parents; i++)
+ if ((mux->masks[i] & val) == mux->vals[i])
+ return i;
+
+ return -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_mux_ops = {
+ .determine_rate = __clk_mux_determine_rate,
+ .set_parent = uniphier_clk_mux_set_parent,
+ .get_parent = uniphier_clk_mux_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_mux_data *data)
+{
+ struct uniphier_clk_mux *mux;
+ struct clk_init_data init;
+ int ret;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &uniphier_clk_mux_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = data->parent_names;
+ init.num_parents = data->num_parents,
+
+ mux->regmap = regmap;
+ mux->reg = data->reg;
+ mux->masks = data->masks;
+ mux->vals = data->vals;
+ mux->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &mux->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &mux->hw;
+}
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-peri.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-peri.c
new file mode 100644
index 0000000..521c80e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-peri.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_PERI_CLK_UART(idx, ch) \
+ UNIPHIER_CLK_GATE("uart" #ch, (idx), "uart", 0x24, 19 + (ch))
+
+#define UNIPHIER_PERI_CLK_I2C_COMMON \
+ UNIPHIER_CLK_GATE("i2c-common", -1, "i2c", 0x20, 1)
+
+#define UNIPHIER_PERI_CLK_I2C(idx, ch) \
+ UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c-common", 0x24, 5 + (ch))
+
+#define UNIPHIER_PERI_CLK_FI2C(idx, ch) \
+ UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
+
+const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
+ UNIPHIER_PERI_CLK_UART(0, 0),
+ UNIPHIER_PERI_CLK_UART(1, 1),
+ UNIPHIER_PERI_CLK_UART(2, 2),
+ UNIPHIER_PERI_CLK_UART(3, 3),
+ UNIPHIER_PERI_CLK_I2C_COMMON,
+ UNIPHIER_PERI_CLK_I2C(4, 0),
+ UNIPHIER_PERI_CLK_I2C(5, 1),
+ UNIPHIER_PERI_CLK_I2C(6, 2),
+ UNIPHIER_PERI_CLK_I2C(7, 3),
+ UNIPHIER_PERI_CLK_I2C(8, 4),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
+ UNIPHIER_PERI_CLK_UART(0, 0),
+ UNIPHIER_PERI_CLK_UART(1, 1),
+ UNIPHIER_PERI_CLK_UART(2, 2),
+ UNIPHIER_PERI_CLK_UART(3, 3),
+ UNIPHIER_PERI_CLK_FI2C(4, 0),
+ UNIPHIER_PERI_CLK_FI2C(5, 1),
+ UNIPHIER_PERI_CLK_FI2C(6, 2),
+ UNIPHIER_PERI_CLK_FI2C(7, 3),
+ UNIPHIER_PERI_CLK_FI2C(8, 4),
+ UNIPHIER_PERI_CLK_FI2C(9, 5),
+ UNIPHIER_PERI_CLK_FI2C(10, 6),
+ { /* sentinel */ }
+};
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-sys.c b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-sys.c
new file mode 100644
index 0000000..d244e72
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -0,0 +1,255 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/stddef.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_LD4_SYS_CLK_SD \
+ UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8), \
+ UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_SD \
+ UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12), \
+ UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
+
+#define UNIPHIER_LD20_SYS_CLK_SD \
+ UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \
+ UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
+
+/* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */
+#define UNIPHIER_LD4_SYS_CLK_NAND(idx) \
+ UNIPHIER_CLK_FACTOR("nand-200m", -1, "spll", 1, 8), \
+ UNIPHIER_CLK_GATE("nand", (idx), "nand-200m", 0x2104, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_NAND(idx) \
+ UNIPHIER_CLK_FACTOR("nand-200m", -1, "spll", 1, 12), \
+ UNIPHIER_CLK_GATE("nand", (idx), "nand-200m", 0x2104, 2)
+
+#define UNIPHIER_LD11_SYS_CLK_NAND(idx) \
+ UNIPHIER_CLK_FACTOR("nand-200m", -1, "spll", 1, 10), \
+ UNIPHIER_CLK_GATE("nand", (idx), "nand-200m", 0x210c, 0)
+
+#define UNIPHIER_LD11_SYS_CLK_EMMC(idx) \
+ UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
+
+#define UNIPHIER_LD4_SYS_CLK_STDMAC(idx) \
+ UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
+
+#define UNIPHIER_LD11_SYS_CLK_STDMAC(idx) \
+ UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
+
+#define UNIPHIER_PRO4_SYS_CLK_GIO(idx) \
+ UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
+
+#define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch) \
+ UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
+
+#define UNIPHIER_LD11_SYS_CLK_AIO(idx) \
+ UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10), \
+ UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
+
+#define UNIPHIER_LD11_SYS_CLK_EVEA(idx) \
+ UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20), \
+ UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
+
+#define UNIPHIER_LD11_SYS_CLK_EXIV(idx) \
+ UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10), \
+ UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
+
+#define UNIPHIER_PRO4_SYS_CLK_ETHER(idx) \
+ UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
+
+#define UNIPHIER_LD11_SYS_CLK_ETHER(idx) \
+ UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
+
+const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1), /* 1597.44 MHz */
+ UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512), /* 288 MHz */
+ UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1), /* 589.824 MHz */
+ UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+ UNIPHIER_LD4_SYS_CLK_NAND(2),
+ UNIPHIER_LD4_SYS_CLK_SD,
+ UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+ UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
+ UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
+ UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125), /* 589.824 MHz */
+ UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
+ UNIPHIER_LD4_SYS_CLK_NAND(2),
+ UNIPHIER_LD4_SYS_CLK_SD,
+ UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+ UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+ UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC, MIO, RLE */
+ UNIPHIER_PRO4_SYS_CLK_GIO(12), /* Ether, SATA, USB3 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
+ UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
+ UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+ UNIPHIER_LD4_SYS_CLK_NAND(2),
+ UNIPHIER_LD4_SYS_CLK_SD,
+ UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+ UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1), /* 2400 MHz */
+ UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1), /* 2560 MHz */
+ UNIPHIER_CLK_FACTOR("dapll2", -1, "dapll1", 144, 125), /* 2949.12 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+ UNIPHIER_PRO5_SYS_CLK_NAND(2),
+ UNIPHIER_PRO5_SYS_CLK_SD,
+ UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC */
+ UNIPHIER_PRO4_SYS_CLK_GIO(12), /* PCIe, USB3 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1), /* 2400 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+ UNIPHIER_PRO5_SYS_CLK_NAND(2),
+ UNIPHIER_PRO5_SYS_CLK_SD,
+ UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+ UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC, RLE */
+ /* GIO is always clock-enabled: no function for 0x2104 bit6 */
+ UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+ UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+ /* The document mentions 0x2104 bit 18, but not functional */
+ UNIPHIER_CLK_GATE("usb30-phy", 16, NULL, 0x2104, 19),
+ UNIPHIER_CLK_GATE("usb31-phy", 20, NULL, 0x2104, 20),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5), /* 1960 MHz */
+ UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1), /* 1600 MHz */
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
+ UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1), /* 2000 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+ UNIPHIER_LD11_SYS_CLK_NAND(2),
+ UNIPHIER_LD11_SYS_CLK_EMMC(4),
+ /* Index 5 reserved for eMMC PHY */
+ UNIPHIER_LD11_SYS_CLK_ETHER(6),
+ UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC, MIO */
+ UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
+ UNIPHIER_LD11_SYS_CLK_AIO(40),
+ UNIPHIER_LD11_SYS_CLK_EVEA(41),
+ UNIPHIER_LD11_SYS_CLK_EXIV(42),
+ /* CPU gears */
+ UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
+ /* Note: both gear1 and gear4 are spll/4. This is not a bug. */
+ UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+ "cpll/2", "spll/4", "cpll/3", "spll/3",
+ "spll/4", "spll/8", "cpll/4", "cpll/8"),
+ UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+ "mpll/2", "spll/4", "mpll/3", "spll/3",
+ "spll/4", "spll/8", "mpll/4", "mpll/8"),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1), /* ARM: 2200 MHz */
+ UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1), /* Mali: 1300 MHz */
+ UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1), /* Codec: 1600 MHz */
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
+ UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1), /* IPP: 2200 MHz */
+ UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5), /* 2520 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+ UNIPHIER_LD11_SYS_CLK_NAND(2),
+ UNIPHIER_LD11_SYS_CLK_EMMC(4),
+ /* Index 5 reserved for eMMC PHY */
+ UNIPHIER_LD20_SYS_CLK_SD,
+ UNIPHIER_LD11_SYS_CLK_ETHER(6),
+ UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC */
+ /* GIO is always clock-enabled: no function for 0x210c bit5 */
+ /*
+ * clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
+ * We do not use bit 15 here.
+ */
+ UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
+ UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 12),
+ UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
+ UNIPHIER_LD11_SYS_CLK_AIO(40),
+ UNIPHIER_LD11_SYS_CLK_EVEA(41),
+ UNIPHIER_LD11_SYS_CLK_EXIV(42),
+ /* CPU gears */
+ UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+ UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
+ "cpll/2", "spll/2", "cpll/3", "spll/3",
+ "spll/4", "spll/8", "cpll/4", "cpll/8"),
+ UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+ "cpll/2", "spll/2", "cpll/3", "spll/3",
+ "spll/4", "spll/8", "cpll/4", "cpll/8"),
+ UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+ "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+ "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+ { /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
+ UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1), /* ARM: 2600 MHz */
+ UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
+ UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1), /* IPP: 2400 MHz */
+ UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+ UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+ UNIPHIER_LD20_SYS_CLK_SD,
+ UNIPHIER_LD11_SYS_CLK_NAND(2),
+ UNIPHIER_LD11_SYS_CLK_EMMC(4),
+ UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4), /* =GIO0 */
+ UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5), /* =GIO1 */
+ UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6), /* =GIO1-1 */
+ UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 16),
+ UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 18),
+ UNIPHIER_CLK_GATE("usb30-phy2", 18, NULL, 0x210c, 20),
+ UNIPHIER_CLK_GATE("usb31-phy0", 20, NULL, 0x210c, 17),
+ UNIPHIER_CLK_GATE("usb31-phy1", 21, NULL, 0x210c, 19),
+ /* CPU gears */
+ UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+ UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+ UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+ "cpll/2", "spll/2", "cpll/3", "spll/3",
+ "spll/4", "spll/8", "cpll/4", "cpll/8"),
+ UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+ "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+ "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+ { /* sentinel */ }
+};
diff --git a/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier.h b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier.h
new file mode 100644
index 0000000..d10a009
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/clk/uniphier/clk-uniphier.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CLK_UNIPHIER_H__
+#define __CLK_UNIPHIER_H__
+
+struct clk_hw;
+struct device;
+struct regmap;
+
+#define UNIPHIER_CLK_CPUGEAR_MAX_PARENTS 16
+#define UNIPHIER_CLK_MUX_MAX_PARENTS 8
+
+enum uniphier_clk_type {
+ UNIPHIER_CLK_TYPE_CPUGEAR,
+ UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+ UNIPHIER_CLK_TYPE_FIXED_RATE,
+ UNIPHIER_CLK_TYPE_GATE,
+ UNIPHIER_CLK_TYPE_MUX,
+};
+
+struct uniphier_clk_cpugear_data {
+ const char *parent_names[UNIPHIER_CLK_CPUGEAR_MAX_PARENTS];
+ unsigned int num_parents;
+ unsigned int regbase;
+ unsigned int mask;
+};
+
+struct uniphier_clk_fixed_factor_data {
+ const char *parent_name;
+ unsigned int mult;
+ unsigned int div;
+};
+
+struct uniphier_clk_fixed_rate_data {
+ unsigned long fixed_rate;
+};
+
+struct uniphier_clk_gate_data {
+ const char *parent_name;
+ unsigned int reg;
+ unsigned int bit;
+};
+
+struct uniphier_clk_mux_data {
+ const char *parent_names[UNIPHIER_CLK_MUX_MAX_PARENTS];
+ unsigned int num_parents;
+ unsigned int reg;
+ unsigned int masks[UNIPHIER_CLK_MUX_MAX_PARENTS];
+ unsigned int vals[UNIPHIER_CLK_MUX_MAX_PARENTS];
+};
+
+struct uniphier_clk_data {
+ const char *name;
+ enum uniphier_clk_type type;
+ int idx;
+ union {
+ struct uniphier_clk_cpugear_data cpugear;
+ struct uniphier_clk_fixed_factor_data factor;
+ struct uniphier_clk_fixed_rate_data rate;
+ struct uniphier_clk_gate_data gate;
+ struct uniphier_clk_mux_data mux;
+ } data;
+};
+
+#define UNIPHIER_CLK_CPUGEAR(_name, _idx, _regbase, _mask, \
+ _num_parents, ...) \
+ { \
+ .name = (_name), \
+ .type = UNIPHIER_CLK_TYPE_CPUGEAR, \
+ .idx = (_idx), \
+ .data.cpugear = { \
+ .parent_names = { __VA_ARGS__ }, \
+ .num_parents = (_num_parents), \
+ .regbase = (_regbase), \
+ .mask = (_mask) \
+ }, \
+ }
+
+#define UNIPHIER_CLK_FACTOR(_name, _idx, _parent, _mult, _div) \
+ { \
+ .name = (_name), \
+ .type = UNIPHIER_CLK_TYPE_FIXED_FACTOR, \
+ .idx = (_idx), \
+ .data.factor = { \
+ .parent_name = (_parent), \
+ .mult = (_mult), \
+ .div = (_div), \
+ }, \
+ }
+
+#define UNIPHIER_CLK_GATE(_name, _idx, _parent, _reg, _bit) \
+ { \
+ .name = (_name), \
+ .type = UNIPHIER_CLK_TYPE_GATE, \
+ .idx = (_idx), \
+ .data.gate = { \
+ .parent_name = (_parent), \
+ .reg = (_reg), \
+ .bit = (_bit), \
+ }, \
+ }
+
+#define UNIPHIER_CLK_DIV(parent, div) \
+ UNIPHIER_CLK_FACTOR(parent "/" #div, -1, parent, 1, div)
+
+#define UNIPHIER_CLK_DIV2(parent, div0, div1) \
+ UNIPHIER_CLK_DIV(parent, div0), \
+ UNIPHIER_CLK_DIV(parent, div1)
+
+#define UNIPHIER_CLK_DIV3(parent, div0, div1, div2) \
+ UNIPHIER_CLK_DIV2(parent, div0, div1), \
+ UNIPHIER_CLK_DIV(parent, div2)
+
+#define UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3) \
+ UNIPHIER_CLK_DIV2(parent, div0, div1), \
+ UNIPHIER_CLK_DIV2(parent, div2, div3)
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_cpugear_data *data);
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+ const char *name,
+ const struct uniphier_clk_fixed_factor_data *data);
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+ const char *name,
+ const struct uniphier_clk_fixed_rate_data *data);
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_gate_data *data);
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+ struct regmap *regmap,
+ const char *name,
+ const struct uniphier_clk_mux_data *data);
+
+extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+
+#endif /* __CLK_UNIPHIER_H__ */