[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c
new file mode 100644
index 0000000..be623dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c
@@ -0,0 +1,675 @@
+/*
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#undef DEBUG
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
+
+#define DBG(fmt...) pr_debug(fmt)
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001 /* PCR scom addr */
+
+#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
+#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
+#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
+#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
+#define PCR_SPEED_SHIFT 17
+#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
+#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
+#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
+#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
+#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
+
+#define SCOM_PSR 0x408001 /* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
+#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
+#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
+#define PSR_CUR_SPEED_SHIFT (56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+ {0, CPUFREQ_HIGH, 0},
+ {0, CPUFREQ_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retrieved from the device-tree
+ */
+static int g5_pmode_cur;
+
+static void (*g5_switch_volt)(int speed_mode);
+static int (*g5_switch_freq)(int speed_mode);
+static int (*g5_query_freq)(void);
+
+static unsigned long transition_latency;
+
+#ifdef CONFIG_PMAC_SMU
+
+static const u32 *g5_pmode_data;
+static int g5_pmode_max;
+
+static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
+static int g5_fvt_count; /* number of op. points */
+static int g5_fvt_cur; /* current op. point */
+
+/*
+ * SMU based voltage switching for Neo2 platforms
+ */
+
+static void g5_smu_switch_volt(int speed_mode)
+{
+ struct smu_simple_cmd cmd;
+
+ DECLARE_COMPLETION_ONSTACK(comp);
+ smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+ &comp, 'V', 'S', 'L', 'E', 'W',
+ 0xff, g5_fvt_cur+1, speed_mode);
+ wait_for_completion(&comp);
+}
+
+/*
+ * Platform function based voltage/vdnap switching for Neo2
+ */
+
+static struct pmf_function *pfunc_set_vdnap0;
+static struct pmf_function *pfunc_vdnap0_complete;
+
+static void g5_vdnap_switch_volt(int speed_mode)
+{
+ struct pmf_args args;
+ u32 slew, done = 0;
+ unsigned long timeout;
+
+ slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
+ args.count = 1;
+ args.u[0].p = &slew;
+
+ pmf_call_one(pfunc_set_vdnap0, &args);
+
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_vdnap0_complete, &args);
+ if (done)
+ break;
+ usleep_range(1000, 1000);
+ }
+ if (done == 0)
+ pr_warn("Timeout in clock slewing !\n");
+}
+
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int g5_scom_switch_freq(int speed_mode)
+{
+ unsigned long flags;
+ int to;
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ local_irq_save(flags);
+
+ /* Clear PCR high */
+ scom970_write(SCOM_PCR, 0);
+ /* Clear PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+ /* Set PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+ g5_pmode_data[speed_mode]);
+
+ /* Wait for completion */
+ for (to = 0; to < 10; to++) {
+ unsigned long psr = scom970_read(SCOM_PSR);
+
+ if ((psr & PSR_CMD_RECEIVED) == 0 &&
+ (((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+ == 0)
+ break;
+ if (psr & PSR_CMD_COMPLETED)
+ break;
+ udelay(100);
+ }
+
+ local_irq_restore(flags);
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ return 0;
+}
+
+static int g5_scom_query_freq(void)
+{
+ unsigned long psr = scom970_read(SCOM_PSR);
+ int i;
+
+ for (i = 0; i <= g5_pmode_max; i++)
+ if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+ break;
+ return i;
+}
+
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ * Platform function based voltage switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu0_volt_high;
+static struct pmf_function *pfunc_cpu0_volt_low;
+static struct pmf_function *pfunc_cpu1_volt_high;
+static struct pmf_function *pfunc_cpu1_volt_low;
+
+static void g5_pfunc_switch_volt(int speed_mode)
+{
+ if (speed_mode == CPUFREQ_HIGH) {
+ if (pfunc_cpu0_volt_high)
+ pmf_call_one(pfunc_cpu0_volt_high, NULL);
+ if (pfunc_cpu1_volt_high)
+ pmf_call_one(pfunc_cpu1_volt_high, NULL);
+ } else {
+ if (pfunc_cpu0_volt_low)
+ pmf_call_one(pfunc_cpu0_volt_low, NULL);
+ if (pfunc_cpu1_volt_low)
+ pmf_call_one(pfunc_cpu1_volt_low, NULL);
+ }
+ usleep_range(10000, 10000); /* should be faster , to fix */
+}
+
+/*
+ * Platform function based frequency switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu_setfreq_high;
+static struct pmf_function *pfunc_cpu_setfreq_low;
+static struct pmf_function *pfunc_cpu_getfreq;
+static struct pmf_function *pfunc_slewing_done;
+
+static int g5_pfunc_switch_freq(int speed_mode)
+{
+ struct pmf_args args;
+ u32 done = 0;
+ unsigned long timeout;
+ int rc;
+
+ DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ /* Do it */
+ if (speed_mode == CPUFREQ_HIGH)
+ rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+ else
+ rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+ if (rc)
+ pr_warn("pfunc switch error %d\n", rc);
+
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_slewing_done, &args);
+ if (done)
+ break;
+ usleep_range(500, 500);
+ }
+ if (done == 0)
+ pr_warn("Timeout in clock slewing !\n");
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ return 0;
+}
+
+static int g5_pfunc_query_freq(void)
+{
+ struct pmf_args args;
+ u32 val = 0;
+
+ args.count = 1;
+ args.u[0].p = &val;
+ pmf_call_one(pfunc_cpu_getfreq, &args);
+ return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
+}
+
+
+/*
+ * Common interface to the cpufreq core
+ */
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
+{
+ return g5_switch_freq(index);
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+ return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ return cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency);
+}
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+ .name = "powermac",
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = g5_cpufreq_cpu_init,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = g5_cpufreq_target,
+ .get = g5_cpufreq_get_speed,
+ .attr = cpufreq_generic_attr,
+};
+
+
+#ifdef CONFIG_PMAC_SMU
+
+static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
+{
+ unsigned int psize, ssize;
+ unsigned long max_freq;
+ char *freq_method, *volt_method;
+ const u32 *valp;
+ u32 pvr_hi;
+ int use_volts_vdnap = 0;
+ int use_volts_smu = 0;
+ int rc = -ENODEV;
+
+ /* Check supported platforms */
+ if (of_machine_is_compatible("PowerMac8,1") ||
+ of_machine_is_compatible("PowerMac8,2") ||
+ of_machine_is_compatible("PowerMac9,1") ||
+ of_machine_is_compatible("PowerMac12,1"))
+ use_volts_smu = 1;
+ else if (of_machine_is_compatible("PowerMac11,2"))
+ use_volts_vdnap = 1;
+ else
+ return -ENODEV;
+
+ /* Check 970FX for now */
+ valp = of_get_property(cpunode, "cpu-version", NULL);
+ if (!valp) {
+ DBG("No cpu-version property !\n");
+ goto bail_noprops;
+ }
+ pvr_hi = (*valp) >> 16;
+ if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+ pr_err("Unsupported CPU version\n");
+ goto bail_noprops;
+ }
+
+ /* Look for the powertune data in the device-tree */
+ g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
+ if (!g5_pmode_data) {
+ DBG("No power-mode-data !\n");
+ goto bail_noprops;
+ }
+ g5_pmode_max = psize / sizeof(u32) - 1;
+
+ if (use_volts_smu) {
+ const struct smu_sdbp_header *shdr;
+
+ /* Look for the FVT table */
+ shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (!shdr)
+ goto bail_noprops;
+ g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+ ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr);
+ g5_fvt_count = ssize / sizeof(*g5_fvt_table);
+ g5_fvt_cur = 0;
+
+ /* Sanity checking */
+ if (g5_fvt_count < 1 || g5_pmode_max < 1)
+ goto bail_noprops;
+
+ g5_switch_volt = g5_smu_switch_volt;
+ volt_method = "SMU";
+ } else if (use_volts_vdnap) {
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ pr_err("Can't find root of device tree\n");
+ goto bail_noprops;
+ }
+ pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
+ pfunc_vdnap0_complete =
+ pmf_find_function(root, "slewing-done");
+ if (pfunc_set_vdnap0 == NULL ||
+ pfunc_vdnap0_complete == NULL) {
+ pr_err("Can't find required platform function\n");
+ goto bail_noprops;
+ }
+
+ g5_switch_volt = g5_vdnap_switch_volt;
+ volt_method = "GPIO";
+ } else {
+ g5_switch_volt = g5_dummy_switch_volt;
+ volt_method = "none";
+ }
+
+ /*
+ * From what I see, clock-frequency is always the maximal frequency.
+ * The current driver can not slew sysclk yet, so we really only deal
+ * with powertune steps for now. We also only implement full freq and
+ * half freq in this version. So far, I haven't yet seen a machine
+ * supporting anything else.
+ */
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!valp)
+ return -ENODEV;
+ max_freq = (*valp)/1000;
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = max_freq/2;
+
+ /* Set callbacks */
+ transition_latency = 12000;
+ g5_switch_freq = g5_scom_switch_freq;
+ g5_query_freq = g5_scom_query_freq;
+ freq_method = "SCOM";
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
+
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: %s, Voltage method: %s\n",
+ freq_method, volt_method);
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+ /* We keep the CPU node on hold... hopefully, Apple G5 don't have
+ * hotplug CPU with a dynamic device-tree ...
+ */
+ return rc;
+
+ bail_noprops:
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+
+static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
+{
+ struct device_node *cpuid = NULL, *hwclock = NULL;
+ const u8 *eeprom = NULL;
+ const u32 *valp;
+ u64 max_freq, min_freq, ih, il;
+ int has_volt = 1, rc = 0;
+
+ DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+ " RackMac3,1...\n");
+
+ /* Lookup the cpuid eeprom node */
+ cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
+ if (cpuid != NULL)
+ eeprom = of_get_property(cpuid, "cpuid", NULL);
+ if (eeprom == NULL) {
+ pr_err("Can't find cpuid EEPROM !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Lookup the i2c hwclock */
+ for_each_node_by_name(hwclock, "i2c-hwclock") {
+ const char *loc = of_get_property(hwclock,
+ "hwctrl-location", NULL);
+ if (loc == NULL)
+ continue;
+ if (strcmp(loc, "CPU CLOCK"))
+ continue;
+ if (!of_get_property(hwclock, "platform-get-frequency", NULL))
+ continue;
+ break;
+ }
+ if (hwclock == NULL) {
+ pr_err("Can't find i2c clock chip !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock);
+
+ /* Now get all the platform functions */
+ pfunc_cpu_getfreq =
+ pmf_find_function(hwclock, "get-frequency");
+ pfunc_cpu_setfreq_high =
+ pmf_find_function(hwclock, "set-frequency-high");
+ pfunc_cpu_setfreq_low =
+ pmf_find_function(hwclock, "set-frequency-low");
+ pfunc_slewing_done =
+ pmf_find_function(hwclock, "slewing-done");
+ pfunc_cpu0_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-0");
+ pfunc_cpu0_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-0");
+ pfunc_cpu1_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-1");
+ pfunc_cpu1_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-1");
+
+ /* Check we have minimum requirements */
+ if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
+ pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
+ pr_err("Can't find platform functions !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Check that we have complete sets */
+ if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
+ has_volt = 0;
+ }
+ if (!has_volt ||
+ pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
+ }
+
+ /* Note: The device tree also contains a "platform-set-values"
+ * function for which I haven't quite figured out the usage. It
+ * might have to be called on init and/or wakeup, I'm not too sure
+ * but things seem to work fine without it so far ...
+ */
+
+ /* Get max frequency from device-tree */
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!valp) {
+ pr_err("Can't find CPU frequency !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ max_freq = (*valp)/1000;
+
+ /* Now calculate reduced frequency by using the cpuid input freq
+ * ratio. This requires 64 bits math unless we are willing to lose
+ * some precision
+ */
+ ih = *((u32 *)(eeprom + 0x10));
+ il = *((u32 *)(eeprom + 0x20));
+
+ /* Check for machines with no useful settings */
+ if (il == ih) {
+ pr_warn("No low frequency mode available on this model !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ min_freq = 0;
+ if (ih != 0 && il != 0)
+ min_freq = (max_freq * il) / ih;
+
+ /* Sanity check */
+ if (min_freq >= max_freq || min_freq < 1000) {
+ pr_err("Can't calculate low frequency !\n");
+ rc = -ENXIO;
+ goto bail;
+ }
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = min_freq;
+
+ /* Based on a measurement on Xserve G5, rounded up. */
+ transition_latency = 10 * NSEC_PER_MSEC;
+
+ /* Set callbacks */
+ g5_switch_volt = g5_pfunc_switch_volt;
+ g5_switch_freq = g5_pfunc_switch_freq;
+ g5_query_freq = g5_pfunc_query_freq;
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
+
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
+ has_volt ? "i2c/pfunc" : "none");
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+ bail:
+ if (rc != 0) {
+ pmf_put_function(pfunc_cpu_getfreq);
+ pmf_put_function(pfunc_cpu_setfreq_high);
+ pmf_put_function(pfunc_cpu_setfreq_low);
+ pmf_put_function(pfunc_slewing_done);
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ }
+ of_node_put(hwclock);
+ of_node_put(cpuid);
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+static int __init g5_cpufreq_init(void)
+{
+ struct device_node *cpunode;
+ int rc = 0;
+
+ /* Get first CPU node */
+ cpunode = of_cpu_device_node_get(0);
+ if (cpunode == NULL) {
+ pr_err("Can't find any CPU node\n");
+ return -ENODEV;
+ }
+
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
+ rc = g5_pm72_cpufreq_init(cpunode);
+#ifdef CONFIG_PMAC_SMU
+ else
+ rc = g5_neo2_cpufreq_init(cpunode);
+#endif /* CONFIG_PMAC_SMU */
+
+ return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");