diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig
new file mode 100644
index 0000000..b374515
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig
@@ -0,0 +1,354 @@
+menu "CPU Frequency scaling"
+
+config CPU_FREQ
+	bool "CPU Frequency scaling"
+	select SRCU
+	help
+	  CPU Frequency scaling allows you to change the clock speed of 
+	  CPUs on the fly. This is a nice method to save power, because 
+	  the lower the CPU clock speed, the less power the CPU consumes.
+
+	  Note that this driver doesn't automatically change the CPU
+	  clock speed, you need to either enable a dynamic cpufreq governor
+	  (see below) after boot, or use a userspace tool.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+if CPU_FREQ
+
+config CPU_FREQ_GOV_ATTR_SET
+	bool
+
+config CPU_FREQ_GOV_COMMON
+	select CPU_FREQ_GOV_ATTR_SET
+	select IRQ_WORK
+	bool
+
+config CPU_FREQ_BOOST_SW
+	bool
+	depends on THERMAL
+
+config CPU_FREQ_STAT
+	bool "CPU frequency transition statistics"
+	help
+	  Export CPU frequency statistics information through sysfs.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_TIMES
+       bool "CPU frequency time-in-state statistics"
+       help
+         Export CPU time-in-state information through procfs.
+
+         If in doubt, say N.
+
+choice
+	prompt "Default CPUFreq governor"
+	default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
+	default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	help
+	  This option sets which CPUFreq governor shall be loaded at
+	  startup. If in doubt, select 'performance'.
+
+config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	bool "performance"
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'performance' as default. This sets
+	  the frequency statically to the highest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_POWERSAVE
+	bool "powersave"
+	select CPU_FREQ_GOV_POWERSAVE
+	help
+	  Use the CPUFreq governor 'powersave' as default. This sets
+	  the frequency statically to the lowest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_USERSPACE
+	bool "userspace"
+	select CPU_FREQ_GOV_USERSPACE
+	help
+	  Use the CPUFreq governor 'userspace' as default. This allows
+	  you to set the CPU frequency manually or when a userspace 
+	  program shall be able to set the CPU dynamically without having
+	  to enable the userspace governor manually.
+
+config CPU_FREQ_DEFAULT_GOV_ONDEMAND
+	bool "ondemand"
+	select CPU_FREQ_GOV_ONDEMAND
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'ondemand' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the ondemand
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+	bool "conservative"
+	select CPU_FREQ_GOV_CONSERVATIVE
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'conservative' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the conservative
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+	bool "schedutil"
+	depends on SMP
+	select CPU_FREQ_GOV_SCHEDUTIL
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the 'schedutil' CPUFreq governor by default. If unsure,
+	  have a look at the help section of that governor. The fallback
+	  governor will be 'performance'.
+
+endchoice
+
+config CPU_FREQ_GOV_PERFORMANCE
+	tristate "'performance' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  highest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_performance.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_POWERSAVE
+	tristate "'powersave' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  lowest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_powersave.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_USERSPACE
+	tristate "'userspace' governor for userspace frequency scaling"
+	help
+	  Enable this cpufreq governor when you either want to set the
+	  CPU frequency manually or when a userspace program shall
+	  be able to set the CPU dynamically, like on LART 
+	  <http://www.lartmaker.nl/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_userspace.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_ONDEMAND
+	tristate "'ondemand' cpufreq policy governor"
+	select CPU_FREQ_GOV_COMMON
+	help
+	  'ondemand' - This driver adds a dynamic cpufreq policy governor.
+	  The governor does a periodic polling and 
+	  changes frequency based on the CPU utilization.
+	  The support for this governor depends on CPU capability to
+	  do fast frequency switching (i.e, very low latency frequency
+	  transitions). 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_ondemand.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_CONSERVATIVE
+	tristate "'conservative' cpufreq governor"
+	depends on CPU_FREQ
+	select CPU_FREQ_GOV_COMMON
+	help
+	  'conservative' - this driver is rather similar to the 'ondemand'
+	  governor both in its source code and its purpose, the difference is
+	  its optimisation for better suitability in a battery powered
+	  environment.  The frequency is gracefully increased and decreased
+	  rather than jumping to 100% when speed is required.
+
+	  If you have a desktop machine then you should really be considering
+	  the 'ondemand' governor instead, however if you are using a laptop,
+	  PDA or even an AMD64 based computer (due to the unacceptable
+	  step-by-step latency issues between the minimum and maximum frequency
+	  transitions in the CPU) you will probably want to use this governor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_conservative.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_SCHEDUTIL
+	bool "'schedutil' cpufreq policy governor"
+	depends on CPU_FREQ && SMP
+	select CPU_FREQ_GOV_ATTR_SET
+	select IRQ_WORK
+	help
+	  This governor makes decisions based on the utilization data provided
+	  by the scheduler.  It sets the CPU frequency to be proportional to
+	  the utilization/capacity ratio coming from the scheduler.  If the
+	  utilization is frequency-invariant, the new frequency is also
+	  proportional to the maximum available frequency.  If that is not the
+	  case, it is proportional to the current frequency of the CPU.  The
+	  frequency tipping point is at utilization/capacity equal to 80% in
+	  both cases.
+
+	  If in doubt, say N.
+
+comment "CPU frequency scaling drivers"
+
+config CPUFREQ_DT
+	tristate "Generic DT based cpufreq driver"
+	depends on HAVE_CLK && OF
+	# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
+	depends on !CPU_THERMAL || THERMAL
+	select CPUFREQ_DT_PLATDEV
+	select PM_OPP
+	help
+	  This adds a generic DT based cpufreq driver for frequency management.
+	  It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+	  systems.
+
+	  If in doubt, say N.
+
+config CPUFREQ_DT_PLATDEV
+	bool
+	help
+	  This adds a generic DT based cpufreq platdev driver for frequency
+	  management.  This creates a 'cpufreq-dt' platform device, on the
+	  supported platforms.
+
+	  If in doubt, say N.
+
+if X86
+source "drivers/cpufreq/Kconfig.x86"
+endif
+
+if ARM || ARM64
+source "drivers/cpufreq/Kconfig.arm"
+endif
+
+if PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endif
+
+if AVR32
+config AVR32_AT32AP_CPUFREQ
+	bool "CPU frequency driver for AT32AP"
+	depends on PLATFORM_AT32AP
+	default n
+	help
+	  This enables the CPU frequency driver for AT32AP processors.
+	  If in doubt, say N.
+endif
+
+if IA64
+config IA64_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	depends on ACPI_PROCESSOR
+	help
+	This driver adds a CPUFreq driver which utilizes the ACPI
+	Processor Performance States.
+
+	For details, take a look at <file:Documentation/cpu-freq/>.
+
+	If in doubt, say N.
+endif
+
+if MIPS
+config BMIPS_CPUFREQ
+	tristate "BMIPS CPUfreq Driver"
+	help
+	  This option adds a CPUfreq driver for BMIPS processors with
+	  support for configurable CPU frequency.
+
+	  For now, BMIPS5 chips are supported (such as the Broadcom 7425).
+
+	  If in doubt, say N.
+
+config LOONGSON2_CPUFREQ
+	tristate "Loongson2 CPUFreq Driver"
+	depends on LEMOTE_MACH2F
+	help
+	  This option adds a CPUFreq driver for loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson2F and it's successors support this feature.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config LOONGSON1_CPUFREQ
+	tristate "Loongson1 CPUFreq Driver"
+	depends on LOONGSON1_LS1B
+	help
+	  This option adds a CPUFreq driver for loongson1 processors which
+	  support software configurable cpu frequency.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+endif
+
+if SPARC64
+config SPARC_US3_CPUFREQ
+	tristate "UltraSPARC-III CPU Frequency driver"
+	help
+	  This adds the CPUFreq driver for UltraSPARC-III processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+	tristate "UltraSPARC-IIe CPU Frequency driver"
+	help
+	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+endif
+
+if SUPERH
+config SH_CPU_FREQ
+	tristate "SuperH CPU Frequency driver"
+	help
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+endif
+
+config QORIQ_CPUFREQ
+	tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
+	depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
+	depends on !CPU_THERMAL || THERMAL
+	select CLK_QORIQ
+	help
+	  This adds the CPUFreq driver support for Freescale QorIQ SoCs
+	  which are capable of changing the CPU's frequency dynamically.
+
+endif
+endmenu
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.arm b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.arm
new file mode 100644
index 0000000..bdce448
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.arm
@@ -0,0 +1,294 @@
+#
+# ARM CPU Frequency scaling drivers
+#
+
+# big LITTLE core layer and glue drivers
+config ARM_BIG_LITTLE_CPUFREQ
+	tristate "Generic ARM big LITTLE CPUfreq driver"
+	depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
+	# if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
+	depends on !CPU_THERMAL || THERMAL
+	select PM_OPP
+	help
+	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
+
+config ARM_BRCMSTB_AVS_CPUFREQ
+	tristate "Broadcom STB AVS CPUfreq driver"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	default y
+	help
+	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
+	  ("AVS") to handle voltage and frequency scaling. This driver provides
+	  a standard CPUfreq interface to to the firmware.
+
+	  Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
+
+config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+	bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
+	depends on ARM_BRCMSTB_AVS_CPUFREQ
+	help
+	  Enabling this option turns on debug support via sysfs under
+	  /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
+	  write some AVS mailbox registers through sysfs entries.
+
+	  If in doubt, say N.
+
+config ARM_DT_BL_CPUFREQ
+	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && OF
+	help
+	  This enables probing via DT for Generic CPUfreq driver for ARM
+	  big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+        tristate "Versatile Express SPC based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+        help
+          This add the CPUfreq driver support for Versatile Express
+	  big.LITTLE platforms using SPC for power management.
+
+config ARM_EXYNOS5440_CPUFREQ
+	tristate "SAMSUNG EXYNOS5440"
+	depends on SOC_EXYNOS5440
+	depends on HAVE_CLK && OF
+	select PM_OPP
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5440
+	  SoC. The nature of exynos5440 clock controller is
+	  different than previous exynos controllers so not using
+	  the common exynos framework.
+
+	  If in doubt, say N.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+	tristate "Freescale i.MX6 cpufreq support"
+	depends on ARCH_MXC
+	depends on REGULATOR_ANATOP
+	select PM_OPP
+	help
+	  This adds cpufreq driver support for Freescale i.MX6 series SoCs.
+
+	  If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+	def_bool MACH_KIRKWOOD
+	help
+	  This adds the CPUFreq driver for Marvell Kirkwood
+	  SoCs.
+
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
+	depends on ARCH_MEDIATEK && REGULATOR
+	depends on !CPU_THERMAL || THERMAL
+	select PM_OPP
+	help
+	  This adds the CPUFreq driver support for MediaTek SoCs.
+
+config ARM_OMAP2PLUS_CPUFREQ
+	bool "TI OMAP2+"
+	depends on ARCH_OMAP2PLUS
+	default ARCH_OMAP2PLUS
+
+config ARM_S3C_CPUFREQ
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+	depends on ARCH_S3C24XX
+	select ARM_S3C_CPUFREQ
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
+config ARM_S3C2416_CPUFREQ
+	bool "S3C2416 CPU Frequency scaling support"
+	depends on CPU_S3C2416
+	help
+	  This adds the CPUFreq driver for the Samsung S3C2416 and
+	  S3C2450 SoC. The S3C2416 supports changing the rate of the
+	  armdiv clock source and also entering a so called dynamic
+	  voltage scaling mode in which it is possible to reduce the
+	  core voltage of the CPU.
+
+	  If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+	bool "Allow voltage scaling for S3C2416 arm core"
+	depends on ARM_S3C2416_CPUFREQ && REGULATOR
+	help
+	  Enable CPU voltage scaling when entering the dvs mode.
+	  It uses information gathered through existing hardware and
+	  tests but not documented in any datasheet.
+
+	  If in doubt, say N.
+
+config ARM_S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config ARM_S3C64XX_CPUFREQ
+	bool "Samsung S3C64XX"
+	depends on CPU_S3C6410
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
+
+	  If in doubt, say N.
+
+config ARM_S5PV210_CPUFREQ
+	bool "Samsung S5PV210 and S5PC110"
+	depends on CPU_S5PV210
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S5PV210 and
+	  S5PC110 SoCs.
+
+	  If in doubt, say N.
+
+config ARM_SA1100_CPUFREQ
+	bool
+
+config ARM_SA1110_CPUFREQ
+	bool
+
+config ARM_SCPI_CPUFREQ
+        tristate "SCPI based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+        help
+	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
+	  using SCPI protocol for CPU power management.
+
+	  This driver uses SCPI Message Protocol driver to interact with the
+	  firmware providing the CPU DVFS functionality.
+
+config ARM_SPEAR_CPUFREQ
+	bool "SPEAr CPUFreq support"
+	depends on PLAT_SPEAR
+	default y
+	help
+	  This adds the CPUFreq driver support for SPEAr SOCs.
+
+config ARM_STI_CPUFREQ
+	tristate "STi CPUFreq support"
+	depends on SOC_STIH407
+	help
+	  This driver uses the generic OPP framework to match the running
+	  platform with a predefined set of suitable values.  If not provided
+	  we will fall-back so safe-values contained in Device Tree.  Enable
+	  this config option if you wish to add CPUFreq support for STi based
+	  SoCs.
+
+config ARM_TANGO_CPUFREQ
+	bool
+	depends on CPUFREQ_DT && ARCH_TANGO
+	default y
+
+config ARM_TEGRA20_CPUFREQ
+	bool "Tegra20 CPUFreq support"
+	depends on ARCH_TEGRA
+	default y
+	help
+	  This adds the CPUFreq driver support for Tegra20 SOCs.
+
+config ARM_TEGRA124_CPUFREQ
+	tristate "Tegra124 CPUFreq support"
+	depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
+	default y
+	help
+	  This adds the CPUFreq driver support for Tegra124 SOCs.
+
+config ARM_TEGRA186_CPUFREQ
+	tristate "Tegra186 CPUFreq support"
+	depends on ARCH_TEGRA && TEGRA_BPMP
+	help
+	  This adds the CPUFreq driver support for Tegra186 SOCs.
+
+config ARM_TI_CPUFREQ
+	bool "Texas Instruments CPUFreq support"
+	depends on ARCH_OMAP2PLUS
+	help
+	  This driver enables valid OPPs on the running platform based on
+	  values contained within the SoC in use. Enable this in order to
+	  use the cpufreq-dt driver on all Texas Instruments platforms that
+	  provide dt based operating-points-v2 tables with opp-supported-hw
+	  data provided. Required for cpufreq support on AM335x, AM437x,
+	  DRA7x, and AM57x platforms.
+
+config ARM_PXA2xx_CPUFREQ
+	tristate "Intel PXA2xx CPUfreq driver"
+	depends on PXA27x || PXA25x
+	help
+	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
+
+	  If in doubt, say N.
+
+config ACPI_CPPC_CPUFREQ
+	tristate "CPUFreq driver based on the ACPI CPPC spec"
+	depends on ACPI_PROCESSOR
+	select ACPI_CPPC_LIB
+	default n
+	help
+	  This adds a CPUFreq driver which uses CPPC methods
+	  as described in the ACPIv5.1 spec. CPPC stands for
+	  Collaborative Processor Performance Controls. It
+	  is based on an abstract continuous scale of CPU
+	  performance values which allows the remote power
+	  processor to flexibly optimize for power and
+	  performance. CPPC relies on power management firmware
+	  support for its operation.
+
+	  If in doubt, say N.
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.powerpc b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.powerpc
new file mode 100644
index 0000000..3a0595b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.powerpc
@@ -0,0 +1,55 @@
+config CPU_FREQ_CBE
+	tristate "CBE frequency scaling"
+	depends on CBE_RAS && PPC_CELL
+	default m
+	help
+	  This adds the cpufreq driver for Cell BE processors.
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+	  If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+	bool "CBE frequency scaling using PMI interface"
+	depends on CPU_FREQ_CBE
+	default n
+	help
+	  Select this, if you want to use the PMI interface to switch
+	  frequencies. Using PMI, the processor will not only be able to run at
+	  lower speed, but also at lower core voltage.
+
+config CPU_FREQ_MAPLE
+	bool "Support for Maple 970FX Evaluation Board"
+	depends on PPC_MAPLE
+	help
+	  This adds support for frequency switching on Maple 970FX
+	  Evaluation Board and compatible boards (IBM JS2x blades).
+
+config CPU_FREQ_PMAC
+	bool "Support for Apple PowerBooks"
+	depends on ADB_PMU && PPC32
+	help
+	  This adds support for frequency switching on Apple PowerBooks,
+	  this currently includes some models of iBook & Titanium
+	  PowerBook.
+
+config CPU_FREQ_PMAC64
+	bool "Support for some Apple G5s"
+	depends on PPC_PMAC && PPC64
+	help
+	  This adds support for frequency switching on Apple iMac G5,
+	  and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+	bool "Support for PA Semi PWRficient"
+	depends on PPC_PASEMI
+	default y
+	help
+	  This adds the support for frequency switching on PA Semi
+	  PWRficient processors.
+
+config POWERNV_CPUFREQ
+       tristate "CPU frequency scaling for IBM POWERNV platform"
+       depends on PPC_POWERNV
+       default y
+       help
+	 This adds support for CPU frequency switching on IBM POWERNV
+	 platform
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.x86 b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.x86
new file mode 100644
index 0000000..35f7182
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/Kconfig.x86
@@ -0,0 +1,299 @@
+#
+# x86 CPU Frequency scaling drivers
+#
+
+config X86_INTEL_PSTATE
+       bool "Intel P state control"
+       depends on X86
+       select ACPI_PROCESSOR if ACPI
+       select ACPI_CPPC_LIB if X86_64 && ACPI && SCHED_MC_PRIO
+       help
+          This driver provides a P state for Intel core processors.
+	  The driver implements an internal governor and will become
+          the scaling driver and governor for Sandy bridge processors.
+
+	  When this driver is enabled it will become the preferred
+          scaling driver for Sandy bridge processors.
+
+	  If in doubt, say N.
+
+config X86_PCC_CPUFREQ
+	tristate "Processor Clocking Control interface driver"
+	depends on ACPI && ACPI_PROCESSOR
+	help
+	  This driver adds support for the PCC interface.
+
+	  For details, take a look at:
+	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcc-cpufreq.
+
+	  If in doubt, say N.
+
+config X86_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	depends on ACPI_PROCESSOR
+	help
+	  This driver adds a CPUFreq driver which utilizes the ACPI
+	  Processor Performance States.
+	  This driver also supports Intel Enhanced Speedstep and newer
+	  AMD CPUs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_ACPI_CPUFREQ_CPB
+	default y
+	bool "Legacy cpb sysfs knob support for AMD CPUs"
+	depends on X86_ACPI_CPUFREQ && CPU_SUP_AMD
+	help
+	  The powernow-k8 driver used to provide a sysfs knob called "cpb"
+	  to disable the Core Performance Boosting feature of AMD CPUs. This
+	  file has now been superseded by the more generic "boost" entry.
+
+	  By enabling this option the acpi_cpufreq driver provides the old
+	  entry in addition to the new boost ones, for compatibility reasons.
+
+config X86_SFI_CPUFREQ
+	tristate "SFI Performance-States driver"
+	depends on X86_INTEL_MID && SFI
+	help
+	  This adds a CPUFreq driver for some Silvermont based Intel Atom
+	  architectures like Z34xx and Z35xx which enumerate processor
+	  performance states through SFI.
+
+	  If in doubt, say N.
+
+config ELAN_CPUFREQ
+	tristate "AMD Elan SC400 and SC410"
+	depends on MELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
+	  processors.
+
+	  You need to specify the processor maximum speed as boot
+	  parameter: elanfreq=maxspeed (in kHz) or as module
+	  parameter "max_freq".
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config SC520_CPUFREQ
+	tristate "AMD Elan SC520"
+	depends on MELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+
+config X86_POWERNOW_K6
+	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+	  AMD K6-3+ processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7
+	tristate "AMD Mobile Athlon/Duron PowerNow!"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+	bool
+	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	depends on X86_32
+	default y
+
+config X86_POWERNOW_K8
+	tristate "AMD Opteron/Athlon64 PowerNow!"
+	depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ
+	help
+	  This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors.
+	  Support for K10 and newer processors is now in acpi-cpufreq.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+config X86_AMD_FREQ_SENSITIVITY
+	tristate "AMD frequency sensitivity feedback powersave bias"
+	depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD
+	help
+	  This adds AMD-specific powersave bias function to the ondemand
+	  governor, which allows it to make more power-conscious frequency
+	  change decisions based on feedback from hardware (available on AMD
+	  Family 16h and above).
+
+	  Hardware feedback tells software how "sensitive" to frequency changes
+	  the CPUs' workloads are. CPU-bound workloads will be more sensitive
+	  -- they will perform better as frequency increases. Memory/IO-bound
+	  workloads will be less sensitive -- they will not necessarily perform
+	  better as frequency increases.
+
+	  If in doubt, say N.
+
+config X86_GX_SUSPMOD
+	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+	depends on X86_32 && PCI
+	help
+	 This add the CPUFreq driver for NatSemi Geode processors which
+	 support suspend modulation.
+
+	 For details, take a look at <file:Documentation/cpu-freq/>.
+
+	 If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+	tristate "Intel Enhanced SpeedStep (deprecated)"
+	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
+	help
+	  This is deprecated and this functionality is now merged into
+	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+	  speedstep_centrino.
+	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
+	  or 64bit enabled Intel Xeons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+	bool "Built-in tables for Banias CPUs"
+	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
+	default y
+	help
+	  Use built-in tables for Banias CPUs if ACPI encoding
+	  is not available.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+	  mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2,
+	  ICH3 or ICH4 southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
+	  on systems which have an Intel 440BX/ZX/MX southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+	tristate "Intel Pentium 4 clock modulation"
+	help
+	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
+	  processors.  When enabled it will lower CPU temperature by skipping
+	  clocks.
+
+	  This driver should be only used in exceptional
+	  circumstances when very low power is needed because it causes severe
+	  slowdowns and noticeable latencies.  Normally Speedstep should be used
+	  instead.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  Unless you are absolutely sure say N.
+
+config X86_CPUFREQ_NFORCE2
+	tristate "nVidia nForce2 FSB changing"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
+	  platforms.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGRUN
+	tristate "Transmeta LongRun"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+	  which support LongRun.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGHAUL
+	tristate "VIA Cyrix III Longhaul"
+	depends on X86_32 && ACPI_PROCESSOR
+	help
+	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
+	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
+	  processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_E_POWERSAVER
+	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
+	depends on X86_32 && ACPI_PROCESSOR
+	help
+	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
+	  does not have any safeguards to prevent operating the CPU out of spec
+	  and is thus considered dangerous.  Please use the regular ACPI cpufreq
+	  driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
+
+	  If in doubt, say N.
+
+comment "shared options"
+
+config X86_SPEEDSTEP_LIB
+	tristate
+	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+	bool "Relaxed speedstep capability checks"
+	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	help
+	  Don't perform all checks for a speedstep capable system which would
+	  normally be done. Some ancient or strange systems, though speedstep
+	  capable, don't always indicate that they are speedstep capable. This
+	  option lets the probing code bypass some of those checks if the
+	  parameter "relaxed_check=1" is passed to the module.
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/Makefile b/src/kernel/linux/v4.14/drivers/cpufreq/Makefile
new file mode 100644
index 0000000..3ad8aeb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/Makefile
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+# CPUfreq core
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
+
+# CPUfreq stats
+obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
+
+# CPUfreq times
+obj-$(CONFIG_CPU_FREQ_TIMES)		+= cpufreq_times.o
+
+# CPUfreq governors
+obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE)	+= cpufreq_performance.o
+obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE)	+= cpufreq_powersave.o
+obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
+obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
+obj-$(CONFIG_CPU_FREQ_GOV_COMMON)		+= cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET)	+= cpufreq_governor_attr_set.o
+
+obj-$(CONFIG_CPUFREQ_DT)		+= cpufreq-dt.o
+obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
+
+##################################################################################
+# x86 drivers.
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. This is still the case but acpi-cpufreq errors out so that
+# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
+obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
+obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
+obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
+obj-$(CONFIG_X86_LONGRUN)		+= longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
+obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
+obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
+obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY)	+= amd_freq_sensitivity.o
+obj-$(CONFIG_X86_SFI_CPUFREQ)		+= sfi-cpufreq.o
+
+##################################################################################
+# ARM SoC drivers
+obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
+# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big
+# LITTLE drivers, so that it is probed last.
+obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
+
+obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
+obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
+obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
+obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
+obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
+obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
+obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
+obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
+
+
+##################################################################################
+# PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE)		+= ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y			+= ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI)		+= ppc_cbe_cpufreq_pmi.o
+obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
+obj-$(CONFIG_QORIQ_CPUFREQ)   		+= qoriq-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC)		+= pmac32-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC64)		+= pmac64-cpufreq.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ)	+= pasemi-cpufreq.o
+obj-$(CONFIG_POWERNV_CPUFREQ)		+= powernv-cpufreq.o
+
+##################################################################################
+# Other platform drivers
+obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
+obj-$(CONFIG_BFIN_CPU_FREQ)		+= blackfin-cpufreq.o
+obj-$(CONFIG_BMIPS_CPUFREQ)		+= bmips-cpufreq.o
+obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
+obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
+obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
+obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= loongson1-cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
+obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
+obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o
+obj-$(CONFIG_UNICORE32)			+= unicore2-cpufreq.o
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/acpi-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/acpi-cpufreq.c
new file mode 100644
index 0000000..51a3c15
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/acpi-cpufreq.c
@@ -0,0 +1,1018 @@
+/*
+ * acpi-cpufreq.c - ACPI Processor P-States Driver
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *  Copyright (C) 2006       Denis Sadykov <denis.m.sadykov@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+enum {
+	UNDEFINED_CAPABLE = 0,
+	SYSTEM_INTEL_MSR_CAPABLE,
+	SYSTEM_AMD_MSR_CAPABLE,
+	SYSTEM_IO_CAPABLE,
+};
+
+#define INTEL_MSR_RANGE		(0xffff)
+#define AMD_MSR_RANGE		(0x7)
+
+#define MSR_K7_HWCR_CPB_DIS	(1ULL << 25)
+
+struct acpi_cpufreq_data {
+	unsigned int resume;
+	unsigned int cpu_feature;
+	unsigned int acpi_perf_cpu;
+	cpumask_var_t freqdomain_cpus;
+	void (*cpu_freq_write)(struct acpi_pct_register *reg, u32 val);
+	u32 (*cpu_freq_read)(struct acpi_pct_register *reg);
+};
+
+/* acpi_perf_data is a pointer to percpu data. */
+static struct acpi_processor_performance __percpu *acpi_perf_data;
+
+static inline struct acpi_processor_performance *to_perf_data(struct acpi_cpufreq_data *data)
+{
+	return per_cpu_ptr(acpi_perf_data, data->acpi_perf_cpu);
+}
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+static unsigned int acpi_pstate_strict;
+
+static bool boost_state(unsigned int cpu)
+{
+	u32 lo, hi;
+	u64 msr;
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		rdmsr_on_cpu(cpu, MSR_IA32_MISC_ENABLE, &lo, &hi);
+		msr = lo | ((u64)hi << 32);
+		return !(msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE);
+	case X86_VENDOR_AMD:
+		rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
+		msr = lo | ((u64)hi << 32);
+		return !(msr & MSR_K7_HWCR_CPB_DIS);
+	}
+	return false;
+}
+
+static int boost_set_msr(bool enable)
+{
+	u32 msr_addr;
+	u64 msr_mask, val;
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		msr_addr = MSR_IA32_MISC_ENABLE;
+		msr_mask = MSR_IA32_MISC_ENABLE_TURBO_DISABLE;
+		break;
+	case X86_VENDOR_AMD:
+		msr_addr = MSR_K7_HWCR;
+		msr_mask = MSR_K7_HWCR_CPB_DIS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	rdmsrl(msr_addr, val);
+
+	if (enable)
+		val &= ~msr_mask;
+	else
+		val |= msr_mask;
+
+	wrmsrl(msr_addr, val);
+	return 0;
+}
+
+static void boost_set_msr_each(void *p_en)
+{
+	bool enable = (bool) p_en;
+
+	boost_set_msr(enable);
+}
+
+static int set_boost(int val)
+{
+	get_online_cpus();
+	on_each_cpu(boost_set_msr_each, (void *)(long)val, 1);
+	put_online_cpus();
+	pr_debug("Core Boosting %sabled.\n", val ? "en" : "dis");
+
+	return 0;
+}
+
+static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+
+	if (unlikely(!data))
+		return -ENODEV;
+
+	return cpufreq_show_cpus(data->freqdomain_cpus, buf);
+}
+
+cpufreq_freq_attr_ro(freqdomain_cpus);
+
+#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB
+static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf,
+			 size_t count)
+{
+	int ret;
+	unsigned int val = 0;
+
+	if (!acpi_cpufreq_driver.set_boost)
+		return -EINVAL;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret || val > 1)
+		return -EINVAL;
+
+	set_boost(val);
+
+	return count;
+}
+
+static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%u\n", acpi_cpufreq_driver.boost_enabled);
+}
+
+cpufreq_freq_attr_rw(cpb);
+#endif
+
+static int check_est_cpu(unsigned int cpuid)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
+
+	return cpu_has(cpu, X86_FEATURE_EST);
+}
+
+static int check_amd_hwpstate_cpu(unsigned int cpuid)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
+
+	return cpu_has(cpu, X86_FEATURE_HW_PSTATE);
+}
+
+static unsigned extract_io(struct cpufreq_policy *policy, u32 value)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	struct acpi_processor_performance *perf;
+	int i;
+
+	perf = to_perf_data(data);
+
+	for (i = 0; i < perf->state_count; i++) {
+		if (value == perf->states[i].status)
+			return policy->freq_table[i].frequency;
+	}
+	return 0;
+}
+
+static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	struct cpufreq_frequency_table *pos;
+	struct acpi_processor_performance *perf;
+
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+		msr &= AMD_MSR_RANGE;
+	else
+		msr &= INTEL_MSR_RANGE;
+
+	perf = to_perf_data(data);
+
+	cpufreq_for_each_entry(pos, policy->freq_table)
+		if (msr == perf->states[pos->driver_data].status)
+			return pos->frequency;
+	return policy->freq_table[0].frequency;
+}
+
+static unsigned extract_freq(struct cpufreq_policy *policy, u32 val)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+
+	switch (data->cpu_feature) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+	case SYSTEM_AMD_MSR_CAPABLE:
+		return extract_msr(policy, val);
+	case SYSTEM_IO_CAPABLE:
+		return extract_io(policy, val);
+	default:
+		return 0;
+	}
+}
+
+static u32 cpu_freq_read_intel(struct acpi_pct_register *not_used)
+{
+	u32 val, dummy;
+
+	rdmsr(MSR_IA32_PERF_CTL, val, dummy);
+	return val;
+}
+
+static void cpu_freq_write_intel(struct acpi_pct_register *not_used, u32 val)
+{
+	u32 lo, hi;
+
+	rdmsr(MSR_IA32_PERF_CTL, lo, hi);
+	lo = (lo & ~INTEL_MSR_RANGE) | (val & INTEL_MSR_RANGE);
+	wrmsr(MSR_IA32_PERF_CTL, lo, hi);
+}
+
+static u32 cpu_freq_read_amd(struct acpi_pct_register *not_used)
+{
+	u32 val, dummy;
+
+	rdmsr(MSR_AMD_PERF_CTL, val, dummy);
+	return val;
+}
+
+static void cpu_freq_write_amd(struct acpi_pct_register *not_used, u32 val)
+{
+	wrmsr(MSR_AMD_PERF_CTL, val, 0);
+}
+
+static u32 cpu_freq_read_io(struct acpi_pct_register *reg)
+{
+	u32 val;
+
+	acpi_os_read_port(reg->address, &val, reg->bit_width);
+	return val;
+}
+
+static void cpu_freq_write_io(struct acpi_pct_register *reg, u32 val)
+{
+	acpi_os_write_port(reg->address, val, reg->bit_width);
+}
+
+struct drv_cmd {
+	struct acpi_pct_register *reg;
+	u32 val;
+	union {
+		void (*write)(struct acpi_pct_register *reg, u32 val);
+		u32 (*read)(struct acpi_pct_register *reg);
+	} func;
+};
+
+/* Called via smp_call_function_single(), on the target CPU */
+static void do_drv_read(void *_cmd)
+{
+	struct drv_cmd *cmd = _cmd;
+
+	cmd->val = cmd->func.read(cmd->reg);
+}
+
+static u32 drv_read(struct acpi_cpufreq_data *data, const struct cpumask *mask)
+{
+	struct acpi_processor_performance *perf = to_perf_data(data);
+	struct drv_cmd cmd = {
+		.reg = &perf->control_register,
+		.func.read = data->cpu_freq_read,
+	};
+	int err;
+
+	err = smp_call_function_any(mask, do_drv_read, &cmd, 1);
+	WARN_ON_ONCE(err);	/* smp_call_function_any() was buggy? */
+	return cmd.val;
+}
+
+/* Called via smp_call_function_many(), on the target CPUs */
+static void do_drv_write(void *_cmd)
+{
+	struct drv_cmd *cmd = _cmd;
+
+	cmd->func.write(cmd->reg, cmd->val);
+}
+
+static void drv_write(struct acpi_cpufreq_data *data,
+		      const struct cpumask *mask, u32 val)
+{
+	struct acpi_processor_performance *perf = to_perf_data(data);
+	struct drv_cmd cmd = {
+		.reg = &perf->control_register,
+		.val = val,
+		.func.write = data->cpu_freq_write,
+	};
+	int this_cpu;
+
+	this_cpu = get_cpu();
+	if (cpumask_test_cpu(this_cpu, mask))
+		do_drv_write(&cmd);
+
+	smp_call_function_many(mask, do_drv_write, &cmd, 1);
+	put_cpu();
+}
+
+static u32 get_cur_val(const struct cpumask *mask, struct acpi_cpufreq_data *data)
+{
+	u32 val;
+
+	if (unlikely(cpumask_empty(mask)))
+		return 0;
+
+	val = drv_read(data, mask);
+
+	pr_debug("get_cur_val = %u\n", val);
+
+	return val;
+}
+
+static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
+{
+	struct acpi_cpufreq_data *data;
+	struct cpufreq_policy *policy;
+	unsigned int freq;
+	unsigned int cached_freq;
+
+	pr_debug("get_cur_freq_on_cpu (%d)\n", cpu);
+
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (unlikely(!policy))
+		return 0;
+
+	data = policy->driver_data;
+	if (unlikely(!data || !policy->freq_table))
+		return 0;
+
+	cached_freq = policy->freq_table[to_perf_data(data)->state].frequency;
+	freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data));
+	if (freq != cached_freq) {
+		/*
+		 * The dreaded BIOS frequency change behind our back.
+		 * Force set the frequency on next target call.
+		 */
+		data->resume = 1;
+	}
+
+	pr_debug("cur freq = %u\n", freq);
+
+	return freq;
+}
+
+static unsigned int check_freqs(struct cpufreq_policy *policy,
+				const struct cpumask *mask, unsigned int freq)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	unsigned int cur_freq;
+	unsigned int i;
+
+	for (i = 0; i < 100; i++) {
+		cur_freq = extract_freq(policy, get_cur_val(mask, data));
+		if (cur_freq == freq)
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+static int acpi_cpufreq_target(struct cpufreq_policy *policy,
+			       unsigned int index)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	struct acpi_processor_performance *perf;
+	const struct cpumask *mask;
+	unsigned int next_perf_state = 0; /* Index into perf table */
+	int result = 0;
+
+	if (unlikely(!data)) {
+		return -ENODEV;
+	}
+
+	perf = to_perf_data(data);
+	next_perf_state = policy->freq_table[index].driver_data;
+	if (perf->state == next_perf_state) {
+		if (unlikely(data->resume)) {
+			pr_debug("Called after resume, resetting to P%d\n",
+				next_perf_state);
+			data->resume = 0;
+		} else {
+			pr_debug("Already at target state (P%d)\n",
+				next_perf_state);
+			return 0;
+		}
+	}
+
+	/*
+	 * The core won't allow CPUs to go away until the governor has been
+	 * stopped, so we can rely on the stability of policy->cpus.
+	 */
+	mask = policy->shared_type == CPUFREQ_SHARED_TYPE_ANY ?
+		cpumask_of(policy->cpu) : policy->cpus;
+
+	drv_write(data, mask, perf->states[next_perf_state].control);
+
+	if (acpi_pstate_strict) {
+		if (!check_freqs(policy, mask,
+				 policy->freq_table[index].frequency)) {
+			pr_debug("acpi_cpufreq_target failed (%d)\n",
+				policy->cpu);
+			result = -EAGAIN;
+		}
+	}
+
+	if (!result)
+		perf->state = next_perf_state;
+
+	return result;
+}
+
+unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+				      unsigned int target_freq)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	struct acpi_processor_performance *perf;
+	struct cpufreq_frequency_table *entry;
+	unsigned int next_perf_state, next_freq, index;
+
+	/*
+	 * Find the closest frequency above target_freq.
+	 */
+	if (policy->cached_target_freq == target_freq)
+		index = policy->cached_resolved_idx;
+	else
+		index = cpufreq_table_find_index_dl(policy, target_freq);
+
+	entry = &policy->freq_table[index];
+	next_freq = entry->frequency;
+	next_perf_state = entry->driver_data;
+
+	perf = to_perf_data(data);
+	if (perf->state == next_perf_state) {
+		if (unlikely(data->resume))
+			data->resume = 0;
+		else
+			return next_freq;
+	}
+
+	data->cpu_freq_write(&perf->control_register,
+			     perf->states[next_perf_state].control);
+	perf->state = next_perf_state;
+	return next_freq;
+}
+
+static unsigned long
+acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
+{
+	struct acpi_processor_performance *perf;
+
+	perf = to_perf_data(data);
+	if (cpu_khz) {
+		/* search the closest match to cpu_khz */
+		unsigned int i;
+		unsigned long freq;
+		unsigned long freqn = perf->states[0].core_frequency * 1000;
+
+		for (i = 0; i < (perf->state_count-1); i++) {
+			freq = freqn;
+			freqn = perf->states[i+1].core_frequency * 1000;
+			if ((2 * cpu_khz) > (freqn + freq)) {
+				perf->state = i;
+				return freq;
+			}
+		}
+		perf->state = perf->state_count-1;
+		return freqn;
+	} else {
+		/* assume CPU is at P0... */
+		perf->state = 0;
+		return perf->states[0].core_frequency * 1000;
+	}
+}
+
+static void free_acpi_perf_data(void)
+{
+	unsigned int i;
+
+	/* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
+	for_each_possible_cpu(i)
+		free_cpumask_var(per_cpu_ptr(acpi_perf_data, i)
+				 ->shared_cpu_map);
+	free_percpu(acpi_perf_data);
+}
+
+static int cpufreq_boost_online(unsigned int cpu)
+{
+	/*
+	 * On the CPU_UP path we simply keep the boost-disable flag
+	 * in sync with the current global state.
+	 */
+	return boost_set_msr(acpi_cpufreq_driver.boost_enabled);
+}
+
+static int cpufreq_boost_down_prep(unsigned int cpu)
+{
+	/*
+	 * Clear the boost-disable bit on the CPU_DOWN path so that
+	 * this cpu cannot block the remaining ones from boosting.
+	 */
+	return boost_set_msr(1);
+}
+
+/*
+ * acpi_cpufreq_early_init - initialize ACPI P-States library
+ *
+ * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c)
+ * in order to determine correct frequency and voltage pairings. We can
+ * do _PDC and _PSD and find out the processor dependency for the
+ * actual init that will happen later...
+ */
+static int __init acpi_cpufreq_early_init(void)
+{
+	unsigned int i;
+	pr_debug("acpi_cpufreq_early_init\n");
+
+	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
+	if (!acpi_perf_data) {
+		pr_debug("Memory allocation error for acpi_perf_data.\n");
+		return -ENOMEM;
+	}
+	for_each_possible_cpu(i) {
+		if (!zalloc_cpumask_var_node(
+			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
+			GFP_KERNEL, cpu_to_node(i))) {
+
+			/* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
+			free_acpi_perf_data();
+			return -ENOMEM;
+		}
+	}
+
+	/* Do initialization in ACPI core */
+	acpi_processor_preregister_performance(acpi_perf_data);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Some BIOSes do SW_ANY coordination internally, either set it up in hw
+ * or do it in BIOS firmware and won't inform about it to OS. If not
+ * detected, this has a side effect of making CPU run at a different speed
+ * than OS intended it to run at. Detect it and handle it cleanly.
+ */
+static int bios_with_sw_any_bug;
+
+static int sw_any_bug_found(const struct dmi_system_id *d)
+{
+	bios_with_sw_any_bug = 1;
+	return 0;
+}
+
+static const struct dmi_system_id sw_any_bug_dmi_table[] = {
+	{
+		.callback = sw_any_bug_found,
+		.ident = "Supermicro Server X6DLP",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_BIOS_VERSION, "080010"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
+		},
+	},
+	{ }
+};
+
+static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
+{
+	/* Intel Xeon Processor 7100 Series Specification Update
+	 * http://www.intel.com/Assets/PDF/specupdate/314554.pdf
+	 * AL30: A Machine Check Exception (MCE) Occurring during an
+	 * Enhanced Intel SpeedStep Technology Ratio Change May Cause
+	 * Both Processor Cores to Lock Up. */
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		if ((c->x86 == 15) &&
+		    (c->x86_model == 6) &&
+		    (c->x86_stepping == 8)) {
+			pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n");
+			return -ENODEV;
+		    }
+		}
+	return 0;
+}
+#endif
+
+static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	unsigned int valid_states = 0;
+	unsigned int cpu = policy->cpu;
+	struct acpi_cpufreq_data *data;
+	unsigned int result = 0;
+	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
+	struct acpi_processor_performance *perf;
+	struct cpufreq_frequency_table *freq_table;
+#ifdef CONFIG_SMP
+	static int blacklisted;
+#endif
+
+	pr_debug("acpi_cpufreq_cpu_init\n");
+
+#ifdef CONFIG_SMP
+	if (blacklisted)
+		return blacklisted;
+	blacklisted = acpi_cpufreq_blacklist(c);
+	if (blacklisted)
+		return blacklisted;
+#endif
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&data->freqdomain_cpus, GFP_KERNEL)) {
+		result = -ENOMEM;
+		goto err_free;
+	}
+
+	perf = per_cpu_ptr(acpi_perf_data, cpu);
+	data->acpi_perf_cpu = cpu;
+	policy->driver_data = data;
+
+	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
+		acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	result = acpi_processor_register_performance(perf, cpu);
+	if (result)
+		goto err_free_mask;
+
+	policy->shared_type = perf->shared_type;
+
+	/*
+	 * Will let policy->cpus know about dependency only when software
+	 * coordination is required.
+	 */
+	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
+	    policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+		cpumask_copy(policy->cpus, perf->shared_cpu_map);
+	}
+	cpumask_copy(data->freqdomain_cpus, perf->shared_cpu_map);
+
+#ifdef CONFIG_SMP
+	dmi_check_system(sw_any_bug_dmi_table);
+	if (bios_with_sw_any_bug && !policy_is_shared(policy)) {
+		policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+		cpumask_copy(policy->cpus, topology_core_cpumask(cpu));
+	}
+
+	if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) {
+		cpumask_clear(policy->cpus);
+		cpumask_set_cpu(cpu, policy->cpus);
+		cpumask_copy(data->freqdomain_cpus,
+			     topology_sibling_cpumask(cpu));
+		policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
+		pr_info_once("overriding BIOS provided _PSD data\n");
+	}
+#endif
+
+	/* capability check */
+	if (perf->state_count <= 1) {
+		pr_debug("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	if (perf->control_register.space_id != perf->status_register.space_id) {
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	switch (perf->control_register.space_id) {
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+		    boot_cpu_data.x86 == 0xf) {
+			pr_debug("AMD K8 systems must use native drivers.\n");
+			result = -ENODEV;
+			goto err_unreg;
+		}
+		pr_debug("SYSTEM IO addr space\n");
+		data->cpu_feature = SYSTEM_IO_CAPABLE;
+		data->cpu_freq_read = cpu_freq_read_io;
+		data->cpu_freq_write = cpu_freq_write_io;
+		break;
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+		pr_debug("HARDWARE addr space\n");
+		if (check_est_cpu(cpu)) {
+			data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
+			data->cpu_freq_read = cpu_freq_read_intel;
+			data->cpu_freq_write = cpu_freq_write_intel;
+			break;
+		}
+		if (check_amd_hwpstate_cpu(cpu)) {
+			data->cpu_feature = SYSTEM_AMD_MSR_CAPABLE;
+			data->cpu_freq_read = cpu_freq_read_amd;
+			data->cpu_freq_write = cpu_freq_write_amd;
+			break;
+		}
+		result = -ENODEV;
+		goto err_unreg;
+	default:
+		pr_debug("Unknown addr space %d\n",
+			(u32) (perf->control_register.space_id));
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	freq_table = kzalloc(sizeof(*freq_table) *
+		    (perf->state_count+1), GFP_KERNEL);
+	if (!freq_table) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+
+	/* detect transition latency */
+	policy->cpuinfo.transition_latency = 0;
+	for (i = 0; i < perf->state_count; i++) {
+		if ((perf->states[i].transition_latency * 1000) >
+		    policy->cpuinfo.transition_latency)
+			policy->cpuinfo.transition_latency =
+			    perf->states[i].transition_latency * 1000;
+	}
+
+	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
+	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
+	    policy->cpuinfo.transition_latency > 20 * 1000) {
+		policy->cpuinfo.transition_latency = 20 * 1000;
+		pr_info_once("P-state transition latency capped at 20 uS\n");
+	}
+
+	/* table init */
+	for (i = 0; i < perf->state_count; i++) {
+		if (i > 0 && perf->states[i].core_frequency >=
+		    freq_table[valid_states-1].frequency / 1000)
+			continue;
+
+		freq_table[valid_states].driver_data = i;
+		freq_table[valid_states].frequency =
+		    perf->states[i].core_frequency * 1000;
+		valid_states++;
+	}
+	freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+	perf->state = 0;
+
+	result = cpufreq_table_validate_and_show(policy, freq_table);
+	if (result)
+		goto err_freqfree;
+
+	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+		pr_warn(FW_WARN "P-state 0 is not max freq\n");
+
+	switch (perf->control_register.space_id) {
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		/*
+		 * The core will not set policy->cur, because
+		 * cpufreq_driver->get is NULL, so we need to set it here.
+		 * However, we have to guess it, because the current speed is
+		 * unknown and not detectable via IO ports.
+		 */
+		policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+		break;
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+		break;
+	default:
+		break;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
+	for (i = 0; i < perf->state_count; i++)
+		pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n",
+			(i == perf->state ? '*' : ' '), i,
+			(u32) perf->states[i].core_frequency,
+			(u32) perf->states[i].power,
+			(u32) perf->states[i].transition_latency);
+
+	/*
+	 * the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers.
+	 */
+	data->resume = 1;
+
+	policy->fast_switch_possible = !acpi_pstate_strict &&
+		!(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
+
+	return result;
+
+err_freqfree:
+	kfree(freq_table);
+err_unreg:
+	acpi_processor_unregister_performance(cpu);
+err_free_mask:
+	free_cpumask_var(data->freqdomain_cpus);
+err_free:
+	kfree(data);
+	policy->driver_data = NULL;
+
+	return result;
+}
+
+static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+
+	pr_debug("acpi_cpufreq_cpu_exit\n");
+
+	policy->fast_switch_possible = false;
+	policy->driver_data = NULL;
+	acpi_processor_unregister_performance(data->acpi_perf_cpu);
+	free_cpumask_var(data->freqdomain_cpus);
+	kfree(policy->freq_table);
+	kfree(data);
+
+	return 0;
+}
+
+static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+
+	pr_debug("acpi_cpufreq_resume\n");
+
+	data->resume = 1;
+
+	return 0;
+}
+
+static struct freq_attr *acpi_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&freqdomain_cpus,
+#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB
+	&cpb,
+#endif
+	NULL,
+};
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= acpi_cpufreq_target,
+	.fast_switch	= acpi_cpufreq_fast_switch,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.resume		= acpi_cpufreq_resume,
+	.name		= "acpi-cpufreq",
+	.attr		= acpi_cpufreq_attr,
+};
+
+static enum cpuhp_state acpi_cpufreq_online;
+
+static void __init acpi_cpufreq_boost_init(void)
+{
+	int ret;
+
+	if (!(boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA))) {
+		pr_debug("Boost capabilities not present in the processor\n");
+		return;
+	}
+
+	acpi_cpufreq_driver.set_boost = set_boost;
+	acpi_cpufreq_driver.boost_enabled = boost_state(0);
+
+	/*
+	 * This calls the online callback on all online cpu and forces all
+	 * MSRs to the same value.
+	 */
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "cpufreq/acpi:online",
+				cpufreq_boost_online, cpufreq_boost_down_prep);
+	if (ret < 0) {
+		pr_err("acpi_cpufreq: failed to register hotplug callbacks\n");
+		return;
+	}
+	acpi_cpufreq_online = ret;
+}
+
+static void acpi_cpufreq_boost_exit(void)
+{
+	if (acpi_cpufreq_online > 0)
+		cpuhp_remove_state_nocalls(acpi_cpufreq_online);
+}
+
+static int __init acpi_cpufreq_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	/* don't keep reloading if cpufreq_driver exists */
+	if (cpufreq_get_current_driver())
+		return -EEXIST;
+
+	pr_debug("acpi_cpufreq_init\n");
+
+	ret = acpi_cpufreq_early_init();
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB
+	/* this is a sysfs file with a strange name and an even stranger
+	 * semantic - per CPU instantiation, but system global effect.
+	 * Lets enable it only on AMD CPUs for compatibility reasons and
+	 * only if configured. This is considered legacy code, which
+	 * will probably be removed at some point in the future.
+	 */
+	if (!check_amd_hwpstate_cpu(0)) {
+		struct freq_attr **attr;
+
+		pr_debug("CPB unsupported, do not expose it\n");
+
+		for (attr = acpi_cpufreq_attr; *attr; attr++)
+			if (*attr == &cpb) {
+				*attr = NULL;
+				break;
+			}
+	}
+#endif
+	acpi_cpufreq_boost_init();
+
+	ret = cpufreq_register_driver(&acpi_cpufreq_driver);
+	if (ret) {
+		free_acpi_perf_data();
+		acpi_cpufreq_boost_exit();
+	}
+	return ret;
+}
+
+static void __exit acpi_cpufreq_exit(void)
+{
+	pr_debug("acpi_cpufreq_exit\n");
+
+	acpi_cpufreq_boost_exit();
+
+	cpufreq_unregister_driver(&acpi_cpufreq_driver);
+
+	free_acpi_perf_data();
+}
+
+module_param(acpi_pstate_strict, uint, 0644);
+MODULE_PARM_DESC(acpi_pstate_strict,
+	"value 0 or non-zero. non-zero -> strict ACPI checks are "
+	"performed during frequency changes.");
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
+static const struct x86_cpu_id acpi_cpufreq_ids[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_ACPI),
+	X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids);
+
+static const struct acpi_device_id processor_device_ids[] = {
+	{ACPI_PROCESSOR_OBJECT_HID, },
+	{ACPI_PROCESSOR_DEVICE_HID, },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
+MODULE_ALIAS("acpi");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/amd_freq_sensitivity.c b/src/kernel/linux/v4.14/drivers/cpufreq/amd_freq_sensitivity.c
new file mode 100644
index 0000000..042023b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/amd_freq_sensitivity.c
@@ -0,0 +1,146 @@
+/*
+ * amd_freq_sensitivity.c: AMD frequency sensitivity feedback powersave bias
+ *                         for the ondemand governor.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ *
+ * Author: Jacob Shin <jacob.shin@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/percpu-defs.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/msr.h>
+#include <asm/cpufeature.h>
+
+#include "cpufreq_ondemand.h"
+
+#define MSR_AMD64_FREQ_SENSITIVITY_ACTUAL	0xc0010080
+#define MSR_AMD64_FREQ_SENSITIVITY_REFERENCE	0xc0010081
+#define CLASS_CODE_SHIFT			56
+#define POWERSAVE_BIAS_MAX			1000
+#define POWERSAVE_BIAS_DEF			400
+
+struct cpu_data_t {
+	u64 actual;
+	u64 reference;
+	unsigned int freq_prev;
+};
+
+static DEFINE_PER_CPU(struct cpu_data_t, cpu_data);
+
+static unsigned int amd_powersave_bias_target(struct cpufreq_policy *policy,
+					      unsigned int freq_next,
+					      unsigned int relation)
+{
+	int sensitivity;
+	long d_actual, d_reference;
+	struct msr actual, reference;
+	struct cpu_data_t *data = &per_cpu(cpu_data, policy->cpu);
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *od_data = policy_dbs->dbs_data;
+	struct od_dbs_tuners *od_tuners = od_data->tuners;
+
+	if (!policy->freq_table)
+		return freq_next;
+
+	rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_ACTUAL,
+		&actual.l, &actual.h);
+	rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_REFERENCE,
+		&reference.l, &reference.h);
+	actual.h &= 0x00ffffff;
+	reference.h &= 0x00ffffff;
+
+	/* counter wrapped around, so stay on current frequency */
+	if (actual.q < data->actual || reference.q < data->reference) {
+		freq_next = policy->cur;
+		goto out;
+	}
+
+	d_actual = actual.q - data->actual;
+	d_reference = reference.q - data->reference;
+
+	/* divide by 0, so stay on current frequency as well */
+	if (d_reference == 0) {
+		freq_next = policy->cur;
+		goto out;
+	}
+
+	sensitivity = POWERSAVE_BIAS_MAX -
+		(POWERSAVE_BIAS_MAX * (d_reference - d_actual) / d_reference);
+
+	clamp(sensitivity, 0, POWERSAVE_BIAS_MAX);
+
+	/* this workload is not CPU bound, so choose a lower freq */
+	if (sensitivity < od_tuners->powersave_bias) {
+		if (data->freq_prev == policy->cur)
+			freq_next = policy->cur;
+
+		if (freq_next > policy->cur)
+			freq_next = policy->cur;
+		else if (freq_next < policy->cur)
+			freq_next = policy->min;
+		else {
+			unsigned int index;
+
+			index = cpufreq_table_find_index_h(policy,
+							   policy->cur - 1);
+			freq_next = policy->freq_table[index].frequency;
+		}
+
+		data->freq_prev = freq_next;
+	} else
+		data->freq_prev = 0;
+
+out:
+	data->actual = actual.q;
+	data->reference = reference.q;
+	return freq_next;
+}
+
+static int __init amd_freq_sensitivity_init(void)
+{
+	u64 val;
+
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return -ENODEV;
+
+	if (!static_cpu_has(X86_FEATURE_PROC_FEEDBACK))
+		return -ENODEV;
+
+	if (rdmsrl_safe(MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, &val))
+		return -ENODEV;
+
+	if (!(val >> CLASS_CODE_SHIFT))
+		return -ENODEV;
+
+	od_register_powersave_bias_handler(amd_powersave_bias_target,
+			POWERSAVE_BIAS_DEF);
+	return 0;
+}
+late_initcall(amd_freq_sensitivity_init);
+
+static void __exit amd_freq_sensitivity_exit(void)
+{
+	od_unregister_powersave_bias_handler();
+}
+module_exit(amd_freq_sensitivity_exit);
+
+static const struct x86_cpu_id amd_freq_sensitivity_ids[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_PROC_FEEDBACK),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, amd_freq_sensitivity_ids);
+
+MODULE_AUTHOR("Jacob Shin <jacob.shin@amd.com>");
+MODULE_DESCRIPTION("AMD frequency sensitivity feedback powersave bias for "
+		"the ondemand governor.");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.c b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.c
new file mode 100644
index 0000000..0c41ab3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.c
@@ -0,0 +1,684 @@
+/*
+ * ARM big.LITTLE Platforms CPUFreq support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *
+ * Copyright (C) 2013 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/topology.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+/* Currently we support only two clusters */
+#define A15_CLUSTER	0
+#define A7_CLUSTER	1
+#define MAX_CLUSTERS	2
+
+#ifdef CONFIG_BL_SWITCHER
+#include <asm/bL_switcher.h>
+static bool bL_switching_enabled;
+#define is_bL_switching_enabled()	bL_switching_enabled
+#define set_switching_enabled(x)	(bL_switching_enabled = (x))
+#else
+#define is_bL_switching_enabled()	false
+#define set_switching_enabled(x)	do { } while (0)
+#define bL_switch_request(...)		do { } while (0)
+#define bL_switcher_put_enabled()	do { } while (0)
+#define bL_switcher_get_enabled()	do { } while (0)
+#endif
+
+#define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq)
+#define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
+
+static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
+static struct cpufreq_arm_bL_ops *arm_bL_ops;
+static struct clk *clk[MAX_CLUSTERS];
+static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
+static atomic_t cluster_usage[MAX_CLUSTERS + 1];
+
+static unsigned int clk_big_min;	/* (Big) clock frequencies */
+static unsigned int clk_little_max;	/* Maximum clock frequency (Little) */
+
+static DEFINE_PER_CPU(unsigned int, physical_cluster);
+static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq);
+
+static struct mutex cluster_lock[MAX_CLUSTERS];
+
+static inline int raw_cpu_to_cluster(int cpu)
+{
+	return topology_physical_package_id(cpu);
+}
+
+static inline int cpu_to_cluster(int cpu)
+{
+	return is_bL_switching_enabled() ?
+		MAX_CLUSTERS : raw_cpu_to_cluster(cpu);
+}
+
+static unsigned int find_cluster_maxfreq(int cluster)
+{
+	int j;
+	u32 max_freq = 0, cpu_freq;
+
+	for_each_online_cpu(j) {
+		cpu_freq = per_cpu(cpu_last_req_freq, j);
+
+		if ((cluster == per_cpu(physical_cluster, j)) &&
+				(max_freq < cpu_freq))
+			max_freq = cpu_freq;
+	}
+
+	pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster,
+			max_freq);
+
+	return max_freq;
+}
+
+static unsigned int clk_get_cpu_rate(unsigned int cpu)
+{
+	u32 cur_cluster = per_cpu(physical_cluster, cpu);
+	u32 rate = clk_get_rate(clk[cur_cluster]) / 1000;
+
+	/* For switcher we use virtual A7 clock rates */
+	if (is_bL_switching_enabled())
+		rate = VIRT_FREQ(cur_cluster, rate);
+
+	pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
+			cur_cluster, rate);
+
+	return rate;
+}
+
+static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
+{
+	if (is_bL_switching_enabled()) {
+		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
+					cpu));
+
+		return per_cpu(cpu_last_req_freq, cpu);
+	} else {
+		return clk_get_cpu_rate(cpu);
+	}
+}
+
+static unsigned int
+bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
+{
+	u32 new_rate, prev_rate;
+	int ret;
+	bool bLs = is_bL_switching_enabled();
+
+	mutex_lock(&cluster_lock[new_cluster]);
+
+	if (bLs) {
+		prev_rate = per_cpu(cpu_last_req_freq, cpu);
+		per_cpu(cpu_last_req_freq, cpu) = rate;
+		per_cpu(physical_cluster, cpu) = new_cluster;
+
+		new_rate = find_cluster_maxfreq(new_cluster);
+		new_rate = ACTUAL_FREQ(new_cluster, new_rate);
+	} else {
+		new_rate = rate;
+	}
+
+	pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
+			__func__, cpu, old_cluster, new_cluster, new_rate);
+
+	ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
+	if (!ret) {
+		/*
+		 * FIXME: clk_set_rate hasn't returned an error here however it
+		 * may be that clk_change_rate failed due to hardware or
+		 * firmware issues and wasn't able to report that due to the
+		 * current design of the clk core layer. To work around this
+		 * problem we will read back the clock rate and check it is
+		 * correct. This needs to be removed once clk core is fixed.
+		 */
+		if (clk_get_rate(clk[new_cluster]) != new_rate * 1000)
+			ret = -EIO;
+	}
+
+	if (WARN_ON(ret)) {
+		pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
+				new_cluster);
+		if (bLs) {
+			per_cpu(cpu_last_req_freq, cpu) = prev_rate;
+			per_cpu(physical_cluster, cpu) = old_cluster;
+		}
+
+		mutex_unlock(&cluster_lock[new_cluster]);
+
+		return ret;
+	}
+
+	mutex_unlock(&cluster_lock[new_cluster]);
+
+	/* Recalc freq for old cluster when switching clusters */
+	if (old_cluster != new_cluster) {
+		pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
+				__func__, cpu, old_cluster, new_cluster);
+
+		/* Switch cluster */
+		bL_switch_request(cpu, new_cluster);
+
+		mutex_lock(&cluster_lock[old_cluster]);
+
+		/* Set freq of old cluster if there are cpus left on it */
+		new_rate = find_cluster_maxfreq(old_cluster);
+		new_rate = ACTUAL_FREQ(old_cluster, new_rate);
+
+		if (new_rate) {
+			pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
+					__func__, old_cluster, new_rate);
+
+			if (clk_set_rate(clk[old_cluster], new_rate * 1000))
+				pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
+						__func__, ret, old_cluster);
+		}
+		mutex_unlock(&cluster_lock[old_cluster]);
+	}
+
+	return 0;
+}
+
+/* Set clock frequency */
+static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
+		unsigned int index)
+{
+	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
+	unsigned int freqs_new;
+	int ret;
+
+	cur_cluster = cpu_to_cluster(cpu);
+	new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
+
+	freqs_new = freq_table[cur_cluster][index].frequency;
+
+	if (is_bL_switching_enabled()) {
+		if ((actual_cluster == A15_CLUSTER) &&
+				(freqs_new < clk_big_min)) {
+			new_cluster = A7_CLUSTER;
+		} else if ((actual_cluster == A7_CLUSTER) &&
+				(freqs_new > clk_little_max)) {
+			new_cluster = A15_CLUSTER;
+		}
+	}
+
+	ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+
+	if (!ret) {
+		arch_set_freq_scale(policy->related_cpus, freqs_new,
+				    policy->cpuinfo.max_freq);
+	}
+
+	return ret;
+}
+
+static inline u32 get_table_count(struct cpufreq_frequency_table *table)
+{
+	int count;
+
+	for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++)
+		;
+
+	return count;
+}
+
+/* get the minimum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_min(struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	uint32_t min_freq = ~0;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency < min_freq)
+			min_freq = pos->frequency;
+	return min_freq;
+}
+
+/* get the maximum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_max(struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	uint32_t max_freq = 0;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency > max_freq)
+			max_freq = pos->frequency;
+	return max_freq;
+}
+
+static int merge_cluster_tables(void)
+{
+	int i, j, k = 0, count = 1;
+	struct cpufreq_frequency_table *table;
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		count += get_table_count(freq_table[i]);
+
+	table = kzalloc(sizeof(*table) * count, GFP_KERNEL);
+	if (!table)
+		return -ENOMEM;
+
+	freq_table[MAX_CLUSTERS] = table;
+
+	/* Add in reverse order to get freqs in increasing order */
+	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
+		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
+				j++) {
+			table[k].frequency = VIRT_FREQ(i,
+					freq_table[i][j].frequency);
+			pr_debug("%s: index: %d, freq: %d\n", __func__, k,
+					table[k].frequency);
+			k++;
+		}
+	}
+
+	table[k].driver_data = k;
+	table[k].frequency = CPUFREQ_TABLE_END;
+
+	pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k);
+
+	return 0;
+}
+
+static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					    const struct cpumask *cpumask)
+{
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
+
+	if (!freq_table[cluster])
+		return;
+
+	clk_put(clk[cluster]);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+	if (arm_bL_ops->free_opp_table)
+		arm_bL_ops->free_opp_table(cpumask);
+	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
+}
+
+static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
+{
+	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i;
+
+	if (atomic_dec_return(&cluster_usage[cluster]))
+		return;
+
+	if (cluster < MAX_CLUSTERS)
+		return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
+
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return;
+		}
+
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
+	}
+
+	/* free virtual table */
+	kfree(freq_table[cluster]);
+}
+
+static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
+{
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
+	int ret;
+
+	if (freq_table[cluster])
+		return 0;
+
+	ret = arm_bL_ops->init_opp_table(cpumask);
+	if (ret) {
+		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
+				__func__, cpu_dev->id, ret);
+		goto out;
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
+	if (ret) {
+		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
+				__func__, cpu_dev->id, ret);
+		goto free_opp_table;
+	}
+
+	clk[cluster] = clk_get(cpu_dev, NULL);
+	if (!IS_ERR(clk[cluster])) {
+		dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n",
+				__func__, clk[cluster], freq_table[cluster],
+				cluster);
+		return 0;
+	}
+
+	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
+			__func__, cpu_dev->id, cluster);
+	ret = PTR_ERR(clk[cluster]);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+
+free_opp_table:
+	if (arm_bL_ops->free_opp_table)
+		arm_bL_ops->free_opp_table(cpumask);
+out:
+	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
+			cluster);
+	return ret;
+}
+
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					  const struct cpumask *cpumask)
+{
+	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i, ret;
+
+	if (atomic_inc_return(&cluster_usage[cluster]) != 1)
+		return 0;
+
+	if (cluster < MAX_CLUSTERS) {
+		ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
+		if (ret)
+			atomic_dec(&cluster_usage[cluster]);
+		return ret;
+	}
+
+	/*
+	 * Get data for all clusters and fill virtual cluster with a merge of
+	 * both
+	 */
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
+		if (ret)
+			goto put_clusters;
+	}
+
+	ret = merge_cluster_tables();
+	if (ret)
+		goto put_clusters;
+
+	/* Assuming 2 cluster, set clk_big_min and clk_little_max */
+	clk_big_min = get_table_min(freq_table[0]);
+	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
+
+	pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n",
+			__func__, cluster, clk_big_min, clk_little_max);
+
+	return 0;
+
+put_clusters:
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
+	}
+
+	atomic_dec(&cluster_usage[cluster]);
+
+	return ret;
+}
+
+/* Per-CPU initialization */
+static int bL_cpufreq_init(struct cpufreq_policy *policy)
+{
+	u32 cur_cluster = cpu_to_cluster(policy->cpu);
+	struct device *cpu_dev;
+	int ret;
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("%s: failed to get cpu%d device\n", __func__,
+				policy->cpu);
+		return -ENODEV;
+	}
+
+	if (cur_cluster < MAX_CLUSTERS) {
+		int cpu;
+
+		cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+
+		for_each_cpu(cpu, policy->cpus)
+			per_cpu(physical_cluster, cpu) = cur_cluster;
+	} else {
+		/* Assumption: during init, we are always running on A15 */
+		per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
+	}
+
+	ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+	if (ret)
+		return ret;
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
+	if (ret) {
+		dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
+			policy->cpu, cur_cluster);
+		put_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+		return ret;
+	}
+
+	policy->cpuinfo.transition_latency =
+				arm_bL_ops->get_transition_latency(cpu_dev);
+
+	if (is_bL_switching_enabled())
+		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
+
+	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
+	return 0;
+}
+
+static int bL_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	struct device *cpu_dev;
+	int cur_cluster = cpu_to_cluster(policy->cpu);
+
+	if (cur_cluster < MAX_CLUSTERS) {
+		cpufreq_cooling_unregister(cdev[cur_cluster]);
+		cdev[cur_cluster] = NULL;
+	}
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("%s: failed to get cpu%d device\n", __func__,
+				policy->cpu);
+		return -ENODEV;
+	}
+
+	put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
+	dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
+
+	return 0;
+}
+
+static void bL_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
+	int cur_cluster = cpu_to_cluster(policy->cpu);
+	struct device_node *np;
+
+	/* Do not register a cpu_cooling device if we are in IKS mode */
+	if (cur_cluster >= MAX_CLUSTERS)
+		return;
+
+	np = of_node_get(cpu_dev->of_node);
+	if (WARN_ON(!np))
+		return;
+
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		u32 power_coefficient = 0;
+
+		of_property_read_u32(np, "dynamic-power-coefficient",
+				     &power_coefficient);
+
+		cdev[cur_cluster] = of_cpufreq_power_cooling_register(np,
+				policy, power_coefficient, NULL);
+		if (IS_ERR(cdev[cur_cluster])) {
+			dev_err(cpu_dev,
+				"running cpufreq without cooling device: %ld\n",
+				PTR_ERR(cdev[cur_cluster]));
+			cdev[cur_cluster] = NULL;
+		}
+	}
+	of_node_put(np);
+}
+
+static struct cpufreq_driver bL_cpufreq_driver = {
+	.name			= "arm-big-little",
+	.flags			= CPUFREQ_STICKY |
+					CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+					CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify			= cpufreq_generic_frequency_table_verify,
+	.target_index		= bL_cpufreq_set_target,
+	.get			= bL_cpufreq_get_rate,
+	.init			= bL_cpufreq_init,
+	.exit			= bL_cpufreq_exit,
+	.ready			= bL_cpufreq_ready,
+	.attr			= cpufreq_generic_attr,
+};
+
+#ifdef CONFIG_BL_SWITCHER
+static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb,
+					unsigned long action, void *_arg)
+{
+	pr_debug("%s: action: %ld\n", __func__, action);
+
+	switch (action) {
+	case BL_NOTIFY_PRE_ENABLE:
+	case BL_NOTIFY_PRE_DISABLE:
+		cpufreq_unregister_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_ENABLE:
+		set_switching_enabled(true);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_DISABLE:
+		set_switching_enabled(false);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block bL_switcher_notifier = {
+	.notifier_call = bL_cpufreq_switcher_notifier,
+};
+
+static int __bLs_register_notifier(void)
+{
+	return bL_switcher_register_notifier(&bL_switcher_notifier);
+}
+
+static int __bLs_unregister_notifier(void)
+{
+	return bL_switcher_unregister_notifier(&bL_switcher_notifier);
+}
+#else
+static int __bLs_register_notifier(void) { return 0; }
+static int __bLs_unregister_notifier(void) { return 0; }
+#endif
+
+int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
+{
+	int ret, i;
+
+	if (arm_bL_ops) {
+		pr_debug("%s: Already registered: %s, exiting\n", __func__,
+				arm_bL_ops->name);
+		return -EBUSY;
+	}
+
+	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
+	    !ops->get_transition_latency) {
+		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
+		return -ENODEV;
+	}
+
+	arm_bL_ops = ops;
+
+	set_switching_enabled(bL_switcher_get_enabled());
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		mutex_init(&cluster_lock[i]);
+
+	ret = cpufreq_register_driver(&bL_cpufreq_driver);
+	if (ret) {
+		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
+				__func__, ops->name, ret);
+		arm_bL_ops = NULL;
+	} else {
+		ret = __bLs_register_notifier();
+		if (ret) {
+			cpufreq_unregister_driver(&bL_cpufreq_driver);
+			arm_bL_ops = NULL;
+		} else {
+			pr_info("%s: Registered platform driver: %s\n",
+					__func__, ops->name);
+		}
+	}
+
+	bL_switcher_put_enabled();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bL_cpufreq_register);
+
+void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops)
+{
+	if (arm_bL_ops != ops) {
+		pr_err("%s: Registered with: %s, can't unregister, exiting\n",
+				__func__, arm_bL_ops->name);
+		return;
+	}
+
+	bL_switcher_get_enabled();
+	__bLs_unregister_notifier();
+	cpufreq_unregister_driver(&bL_cpufreq_driver);
+	bL_switcher_put_enabled();
+	pr_info("%s: Un-registered platform driver: %s\n", __func__,
+			arm_bL_ops->name);
+	arm_bL_ops = NULL;
+}
+EXPORT_SYMBOL_GPL(bL_cpufreq_unregister);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.h b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.h
new file mode 100644
index 0000000..184d7c3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little.h
@@ -0,0 +1,43 @@
+/*
+ * ARM big.LITTLE platform's CPUFreq header file
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *
+ * Copyright (C) 2013 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef CPUFREQ_ARM_BIG_LITTLE_H
+#define CPUFREQ_ARM_BIG_LITTLE_H
+
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/types.h>
+
+struct cpufreq_arm_bL_ops {
+	char name[CPUFREQ_NAME_LEN];
+
+	/*
+	 * This must set opp table for cpu_dev in a similar way as done by
+	 * dev_pm_opp_of_add_table().
+	 */
+	int (*init_opp_table)(const struct cpumask *cpumask);
+
+	/* Optional */
+	int (*get_transition_latency)(struct device *cpu_dev);
+	void (*free_opp_table)(const struct cpumask *cpumask);
+};
+
+int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
+void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops);
+
+#endif /* CPUFREQ_ARM_BIG_LITTLE_H */
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little_dt.c b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little_dt.c
new file mode 100644
index 0000000..39b3f51
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/arm_big_little_dt.c
@@ -0,0 +1,100 @@
+/*
+ * Generic big.LITTLE CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver and gets
+ * Frequency information from Device Tree. Freq table in DT must be in KHz.
+ *
+ * Copyright (C) 2013 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include "arm_big_little.h"
+
+/* get cpu node with valid operating-points */
+static struct device_node *get_cpu_node_with_valid_op(int cpu)
+{
+	struct device_node *np = of_cpu_device_node_get(cpu);
+
+	if (!of_get_property(np, "operating-points", NULL)) {
+		of_node_put(np);
+		np = NULL;
+	}
+
+	return np;
+}
+
+static int dt_get_transition_latency(struct device *cpu_dev)
+{
+	struct device_node *np;
+	u32 transition_latency = CPUFREQ_ETERNAL;
+
+	np = of_node_get(cpu_dev->of_node);
+	if (!np) {
+		pr_info("Failed to find cpu node. Use CPUFREQ_ETERNAL transition latency\n");
+		return CPUFREQ_ETERNAL;
+	}
+
+	of_property_read_u32(np, "clock-latency", &transition_latency);
+	of_node_put(np);
+
+	pr_debug("%s: clock-latency: %d\n", __func__, transition_latency);
+	return transition_latency;
+}
+
+static struct cpufreq_arm_bL_ops dt_bL_ops = {
+	.name	= "dt-bl",
+	.get_transition_latency = dt_get_transition_latency,
+	.init_opp_table = dev_pm_opp_of_cpumask_add_table,
+	.free_opp_table = dev_pm_opp_of_cpumask_remove_table,
+};
+
+static int generic_bL_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+
+	np = get_cpu_node_with_valid_op(0);
+	if (!np)
+		return -ENODEV;
+
+	of_node_put(np);
+	return bL_cpufreq_register(&dt_bL_ops);
+}
+
+static int generic_bL_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&dt_bL_ops);
+	return 0;
+}
+
+static struct platform_driver generic_bL_platdrv = {
+	.driver = {
+		.name	= "arm-bL-cpufreq-dt",
+	},
+	.probe		= generic_bL_probe,
+	.remove		= generic_bL_remove,
+};
+module_platform_driver(generic_bL_platdrv);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/at32ap-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/at32ap-cpufreq.c
new file mode 100644
index 0000000..7b612c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/at32ap-cpufreq.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * Based on MIPS implementation arch/mips/kernel/time.c
+ *   Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+
+static struct cpufreq_frequency_table *freq_table;
+
+static unsigned int	ref_freq;
+static unsigned long	loops_per_jiffy_ref;
+
+static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int old_freq, new_freq;
+
+	old_freq = policy->cur;
+	new_freq = freq_table[index].frequency;
+
+	if (!ref_freq) {
+		ref_freq = old_freq;
+		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
+	}
+
+	if (old_freq < new_freq)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, new_freq);
+	clk_set_rate(policy->clk, new_freq * 1000);
+	if (new_freq < old_freq)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, new_freq);
+
+	return 0;
+}
+
+static int at32_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	unsigned int frequency, rate, min_freq;
+	struct clk *cpuclk;
+	int retval, steps, i;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	cpuclk = clk_get(NULL, "cpu");
+	if (IS_ERR(cpuclk)) {
+		pr_debug("cpufreq: could not get CPU clk\n");
+		retval = PTR_ERR(cpuclk);
+		goto out_err;
+	}
+
+	min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
+	frequency = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
+	policy->cpuinfo.transition_latency = 0;
+
+	/*
+	 * AVR32 CPU frequency rate scales in power of two between maximum and
+	 * minimum, also add space for the table end marker.
+	 *
+	 * Further validate that the frequency is usable, and append it to the
+	 * frequency table.
+	 */
+	steps = fls(frequency / min_freq) + 1;
+	freq_table = kzalloc(steps * sizeof(struct cpufreq_frequency_table),
+			GFP_KERNEL);
+	if (!freq_table) {
+		retval = -ENOMEM;
+		goto out_err_put_clk;
+	}
+
+	for (i = 0; i < (steps - 1); i++) {
+		rate = clk_round_rate(cpuclk, frequency * 1000) / 1000;
+
+		if (rate != frequency)
+			freq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			freq_table[i].frequency = frequency;
+
+		frequency /= 2;
+	}
+
+	policy->clk = cpuclk;
+	freq_table[steps - 1].frequency = CPUFREQ_TABLE_END;
+
+	retval = cpufreq_table_validate_and_show(policy, freq_table);
+	if (!retval) {
+		printk("cpufreq: AT32AP CPU frequency driver\n");
+		return 0;
+	}
+
+	kfree(freq_table);
+out_err_put_clk:
+	clk_put(cpuclk);
+out_err:
+	return retval;
+}
+
+static struct cpufreq_driver at32_driver = {
+	.name		= "at32ap",
+	.init		= at32_cpufreq_driver_init,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= at32_set_target,
+	.get		= cpufreq_generic_get,
+	.flags		= CPUFREQ_STICKY,
+};
+
+static int __init at32_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&at32_driver);
+}
+late_initcall(at32_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/blackfin-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/blackfin-cpufreq.c
new file mode 100644
index 0000000..12e97d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/blackfin-cpufreq.c
@@ -0,0 +1,217 @@
+/*
+ * Blackfin core clock scaling
+ *
+ * Copyright 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <asm/blackfin.h>
+#include <asm/time.h>
+#include <asm/dpmc.h>
+
+
+/* this is the table of CCLK frequencies, in Hz */
+/* .driver_data is the entry in the auxiliary dpm_state_table[] */
+static struct cpufreq_frequency_table bfin_freq_table[] = {
+	{
+		.frequency = CPUFREQ_TABLE_END,
+		.driver_data = 0,
+	},
+	{
+		.frequency = CPUFREQ_TABLE_END,
+		.driver_data = 1,
+	},
+	{
+		.frequency = CPUFREQ_TABLE_END,
+		.driver_data = 2,
+	},
+	{
+		.frequency = CPUFREQ_TABLE_END,
+		.driver_data = 0,
+	},
+};
+
+static struct bfin_dpm_state {
+	unsigned int csel; /* system clock divider */
+	unsigned int tscale; /* change the divider on the core timer interrupt */
+} dpm_state_table[3];
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+/*
+ * normalized to maximum frequency offset for CYCLES,
+ * used in time-ts cycles clock source, but could be used
+ * somewhere also.
+ */
+unsigned long long __bfin_cycles_off;
+unsigned int __bfin_cycles_mod;
+#endif
+
+/**************************************************************************/
+static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
+{
+
+	unsigned long csel, min_cclk;
+	int index;
+
+	/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \
+	&& defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
+	min_cclk = sclk * 2;
+#else
+	min_cclk = sclk;
+#endif
+
+#ifndef CONFIG_BF60x
+	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
+#else
+	csel = bfin_read32(CGU0_DIV) & 0x1F;
+#endif
+
+	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) {
+		bfin_freq_table[index].frequency = cclk >> index;
+#ifndef CONFIG_BF60x
+		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
+#else
+		dpm_state_table[index].csel = csel;
+#endif
+		dpm_state_table[index].tscale =  (TIME_SCALE >> index) - 1;
+
+		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
+						 bfin_freq_table[index].frequency,
+						 dpm_state_table[index].csel,
+						 dpm_state_table[index].tscale);
+	}
+	return;
+}
+
+static void bfin_adjust_core_timer(void *info)
+{
+	unsigned int tscale;
+	unsigned int index = *(unsigned int *)info;
+
+	/* we have to adjust the core timer, because it is using cclk */
+	tscale = dpm_state_table[index].tscale;
+	bfin_write_TSCALE(tscale);
+	return;
+}
+
+static unsigned int bfin_getfreq_khz(unsigned int cpu)
+{
+	/* Both CoreA/B have the same core clock */
+	return get_cclk() / 1000;
+}
+
+#ifdef CONFIG_BF60x
+static int cpu_set_cclk(int cpu, unsigned long new)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "CCLK");
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	ret = clk_set_rate(clk, new);
+	clk_put(clk);
+	return ret;
+}
+#endif
+
+static int bfin_target(struct cpufreq_policy *policy, unsigned int index)
+{
+#ifndef CONFIG_BF60x
+	unsigned int plldiv;
+#endif
+	static unsigned long lpj_ref;
+	static unsigned int  lpj_ref_freq;
+	unsigned int old_freq, new_freq;
+	int ret = 0;
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+	cycles_t cycles;
+#endif
+
+	old_freq = bfin_getfreq_khz(0);
+	new_freq = bfin_freq_table[index].frequency;
+
+#ifndef CONFIG_BF60x
+	plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
+	bfin_write_PLL_DIV(plldiv);
+#else
+	ret = cpu_set_cclk(policy->cpu, new_freq * 1000);
+	if (ret != 0) {
+		WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
+		return ret;
+	}
+#endif
+	on_each_cpu(bfin_adjust_core_timer, &index, 1);
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+	cycles = get_cycles();
+	SSYNC();
+	cycles += 10; /* ~10 cycles we lose after get_cycles() */
+	__bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
+	__bfin_cycles_mod = index;
+#endif
+	if (!lpj_ref_freq) {
+		lpj_ref = loops_per_jiffy;
+		lpj_ref_freq = old_freq;
+	}
+	if (new_freq != old_freq) {
+		loops_per_jiffy = cpufreq_scale(lpj_ref,
+				lpj_ref_freq, new_freq);
+	}
+
+	return ret;
+}
+
+static int __bfin_cpu_init(struct cpufreq_policy *policy)
+{
+
+	unsigned long cclk, sclk;
+
+	cclk = get_cclk() / 1000;
+	sclk = get_sclk() / 1000;
+
+	if (policy->cpu == CPUFREQ_CPU)
+		bfin_init_tables(cclk, sclk);
+
+	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
+
+	return cpufreq_table_validate_and_show(policy, bfin_freq_table);
+}
+
+static struct cpufreq_driver bfin_driver = {
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = bfin_target,
+	.get = bfin_getfreq_khz,
+	.init = __bfin_cpu_init,
+	.name = "bfin cpufreq",
+	.attr = cpufreq_generic_attr,
+};
+
+static int __init bfin_cpu_init(void)
+{
+	return cpufreq_register_driver(&bfin_driver);
+}
+
+static void __exit bfin_cpu_exit(void)
+{
+	cpufreq_unregister_driver(&bfin_driver);
+}
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("cpufreq driver for Blackfin");
+MODULE_LICENSE("GPL");
+
+module_init(bfin_cpu_init);
+module_exit(bfin_cpu_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/bmips-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/bmips-cpufreq.c
new file mode 100644
index 0000000..1653151
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/bmips-cpufreq.c
@@ -0,0 +1,188 @@
+/*
+ * CPU frequency scaling for Broadcom BMIPS SoCs
+ *
+ * Copyright (c) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+/* for mips_hpt_frequency */
+#include <asm/time.h>
+
+#define BMIPS_CPUFREQ_PREFIX	"bmips"
+#define BMIPS_CPUFREQ_NAME	BMIPS_CPUFREQ_PREFIX "-cpufreq"
+
+#define TRANSITION_LATENCY	(25 * 1000)	/* 25 us */
+
+#define BMIPS5_CLK_DIV_SET_SHIFT	0x7
+#define BMIPS5_CLK_DIV_SHIFT		0x4
+#define BMIPS5_CLK_DIV_MASK		0xf
+
+enum bmips_type {
+	BMIPS5000,
+	BMIPS5200,
+};
+
+struct cpufreq_compat {
+	const char *compatible;
+	unsigned int bmips_type;
+	unsigned int clk_mult;
+	unsigned int max_freqs;
+};
+
+#define BMIPS(c, t, m, f) { \
+	.compatible = c, \
+	.bmips_type = (t), \
+	.clk_mult = (m), \
+	.max_freqs = (f), \
+}
+
+static struct cpufreq_compat bmips_cpufreq_compat[] = {
+	BMIPS("brcm,bmips5000", BMIPS5000, 8, 4),
+	BMIPS("brcm,bmips5200", BMIPS5200, 8, 4),
+	{ }
+};
+
+static struct cpufreq_compat *priv;
+
+static int htp_freq_to_cpu_freq(unsigned int clk_mult)
+{
+	return mips_hpt_frequency * clk_mult / 1000;
+}
+
+static struct cpufreq_frequency_table *
+bmips_cpufreq_get_freq_table(const struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *table;
+	unsigned long cpu_freq;
+	int i;
+
+	cpu_freq = htp_freq_to_cpu_freq(priv->clk_mult);
+
+	table = kmalloc((priv->max_freqs + 1) * sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < priv->max_freqs; i++) {
+		table[i].frequency = cpu_freq / (1 << i);
+		table[i].driver_data = i;
+	}
+	table[i].frequency = CPUFREQ_TABLE_END;
+
+	return table;
+}
+
+static unsigned int bmips_cpufreq_get(unsigned int cpu)
+{
+	unsigned int div;
+	uint32_t mode;
+
+	switch (priv->bmips_type) {
+	case BMIPS5200:
+	case BMIPS5000:
+		mode = read_c0_brcm_mode();
+		div = ((mode >> BMIPS5_CLK_DIV_SHIFT) & BMIPS5_CLK_DIV_MASK);
+		break;
+	default:
+		div = 0;
+	}
+
+	return htp_freq_to_cpu_freq(priv->clk_mult) / (1 << div);
+}
+
+static int bmips_cpufreq_target_index(struct cpufreq_policy *policy,
+				      unsigned int index)
+{
+	unsigned int div = policy->freq_table[index].driver_data;
+
+	switch (priv->bmips_type) {
+	case BMIPS5200:
+	case BMIPS5000:
+		change_c0_brcm_mode(BMIPS5_CLK_DIV_MASK << BMIPS5_CLK_DIV_SHIFT,
+				    (1 << BMIPS5_CLK_DIV_SET_SHIFT) |
+				    (div << BMIPS5_CLK_DIV_SHIFT));
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int bmips_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	kfree(policy->freq_table);
+
+	return 0;
+}
+
+static int bmips_cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *freq_table;
+	int ret;
+
+	freq_table = bmips_cpufreq_get_freq_table(policy);
+	if (IS_ERR(freq_table)) {
+		ret = PTR_ERR(freq_table);
+		pr_err("%s: couldn't determine frequency table (%d).\n",
+			BMIPS_CPUFREQ_NAME, ret);
+		return ret;
+	}
+
+	ret = cpufreq_generic_init(policy, freq_table, TRANSITION_LATENCY);
+	if (ret)
+		bmips_cpufreq_exit(policy);
+	else
+		pr_info("%s: registered\n", BMIPS_CPUFREQ_NAME);
+
+	return ret;
+}
+
+static struct cpufreq_driver bmips_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= bmips_cpufreq_target_index,
+	.get		= bmips_cpufreq_get,
+	.init		= bmips_cpufreq_init,
+	.exit		= bmips_cpufreq_exit,
+	.attr		= cpufreq_generic_attr,
+	.name		= BMIPS_CPUFREQ_PREFIX,
+};
+
+static int __init bmips_cpufreq_probe(void)
+{
+	struct cpufreq_compat *cc;
+	struct device_node *np;
+
+	for (cc = bmips_cpufreq_compat; cc->compatible; cc++) {
+		np = of_find_compatible_node(NULL, "cpu", cc->compatible);
+		if (np) {
+			of_node_put(np);
+			priv = cc;
+			break;
+		}
+	}
+
+	/* We hit the guard element of the array. No compatible CPU found. */
+	if (!cc->compatible)
+		return -ENODEV;
+
+	return cpufreq_register_driver(&bmips_cpufreq_driver);
+}
+device_initcall(bmips_cpufreq_probe);
+
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("CPUfreq driver for Broadcom BMIPS SoCs");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/brcmstb-avs-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/brcmstb-avs-cpufreq.c
new file mode 100644
index 0000000..39c4627
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -0,0 +1,1066 @@
+/*
+ * CPU frequency scaling for Broadcom SoCs with AVS firmware that
+ * supports DVS or DVFS
+ *
+ * Copyright (c) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * "AVS" is the name of a firmware developed at Broadcom. It derives
+ * its name from the technique called "Adaptive Voltage Scaling".
+ * Adaptive voltage scaling was the original purpose of this firmware.
+ * The AVS firmware still supports "AVS mode", where all it does is
+ * adaptive voltage scaling. However, on some newer Broadcom SoCs, the
+ * AVS Firmware, despite its unchanged name, also supports DFS mode and
+ * DVFS mode.
+ *
+ * In the context of this document and the related driver, "AVS" by
+ * itself always means the Broadcom firmware and never refers to the
+ * technique called "Adaptive Voltage Scaling".
+ *
+ * The Broadcom STB AVS CPUfreq driver provides voltage and frequency
+ * scaling on Broadcom SoCs using AVS firmware with support for DFS and
+ * DVFS. The AVS firmware is running on its own co-processor. The
+ * driver supports both uniprocessor (UP) and symmetric multiprocessor
+ * (SMP) systems which share clock and voltage across all CPUs.
+ *
+ * Actual voltage and frequency scaling is done solely by the AVS
+ * firmware. This driver does not change frequency or voltage itself.
+ * It provides a standard CPUfreq interface to the rest of the kernel
+ * and to userland. It interfaces with the AVS firmware to effect the
+ * requested changes and to report back the current system status in a
+ * way that is expected by existing tools.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+
+#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#endif
+
+/* Max number of arguments AVS calls take */
+#define AVS_MAX_CMD_ARGS	4
+/*
+ * This macro is used to generate AVS parameter register offsets. For
+ * x >= AVS_MAX_CMD_ARGS, it returns 0 to protect against accidental memory
+ * access outside of the parameter range. (Offset 0 is the first parameter.)
+ */
+#define AVS_PARAM_MULT(x)	((x) < AVS_MAX_CMD_ARGS ? (x) : 0)
+
+/* AVS Mailbox Register offsets */
+#define AVS_MBOX_COMMAND	0x00
+#define AVS_MBOX_STATUS		0x04
+#define AVS_MBOX_VOLTAGE0	0x08
+#define AVS_MBOX_TEMP0		0x0c
+#define AVS_MBOX_PV0		0x10
+#define AVS_MBOX_MV0		0x14
+#define AVS_MBOX_PARAM(x)	(0x18 + AVS_PARAM_MULT(x) * sizeof(u32))
+#define AVS_MBOX_REVISION	0x28
+#define AVS_MBOX_PSTATE		0x2c
+#define AVS_MBOX_HEARTBEAT	0x30
+#define AVS_MBOX_MAGIC		0x34
+#define AVS_MBOX_SIGMA_HVT	0x38
+#define AVS_MBOX_SIGMA_SVT	0x3c
+#define AVS_MBOX_VOLTAGE1	0x40
+#define AVS_MBOX_TEMP1		0x44
+#define AVS_MBOX_PV1		0x48
+#define AVS_MBOX_MV1		0x4c
+#define AVS_MBOX_FREQUENCY	0x50
+
+/* AVS Commands */
+#define AVS_CMD_AVAILABLE	0x00
+#define AVS_CMD_DISABLE		0x10
+#define AVS_CMD_ENABLE		0x11
+#define AVS_CMD_S2_ENTER	0x12
+#define AVS_CMD_S2_EXIT		0x13
+#define AVS_CMD_BBM_ENTER	0x14
+#define AVS_CMD_BBM_EXIT	0x15
+#define AVS_CMD_S3_ENTER	0x16
+#define AVS_CMD_S3_EXIT		0x17
+#define AVS_CMD_BALANCE		0x18
+/* PMAP and P-STATE commands */
+#define AVS_CMD_GET_PMAP	0x30
+#define AVS_CMD_SET_PMAP	0x31
+#define AVS_CMD_GET_PSTATE	0x40
+#define AVS_CMD_SET_PSTATE	0x41
+
+/* Different modes AVS supports (for GET_PMAP/SET_PMAP) */
+#define AVS_MODE_AVS		0x0
+#define AVS_MODE_DFS		0x1
+#define AVS_MODE_DVS		0x2
+#define AVS_MODE_DVFS		0x3
+
+/*
+ * PMAP parameter p1
+ * unused:31-24, mdiv_p0:23-16, unused:15-14, pdiv:13-10 , ndiv_int:9-0
+ */
+#define NDIV_INT_SHIFT		0
+#define NDIV_INT_MASK		0x3ff
+#define PDIV_SHIFT		10
+#define PDIV_MASK		0xf
+#define MDIV_P0_SHIFT		16
+#define MDIV_P0_MASK		0xff
+/*
+ * PMAP parameter p2
+ * mdiv_p4:31-24, mdiv_p3:23-16, mdiv_p2:15:8, mdiv_p1:7:0
+ */
+#define MDIV_P1_SHIFT		0
+#define MDIV_P1_MASK		0xff
+#define MDIV_P2_SHIFT		8
+#define MDIV_P2_MASK		0xff
+#define MDIV_P3_SHIFT		16
+#define MDIV_P3_MASK		0xff
+#define MDIV_P4_SHIFT		24
+#define MDIV_P4_MASK		0xff
+
+/* Different P-STATES AVS supports (for GET_PSTATE/SET_PSTATE) */
+#define AVS_PSTATE_P0		0x0
+#define AVS_PSTATE_P1		0x1
+#define AVS_PSTATE_P2		0x2
+#define AVS_PSTATE_P3		0x3
+#define AVS_PSTATE_P4		0x4
+#define AVS_PSTATE_MAX		AVS_PSTATE_P4
+
+/* CPU L2 Interrupt Controller Registers */
+#define AVS_CPU_L2_SET0		0x04
+#define AVS_CPU_L2_INT_MASK	BIT(31)
+
+/* AVS Command Status Values */
+#define AVS_STATUS_CLEAR	0x00
+/* Command/notification accepted */
+#define AVS_STATUS_SUCCESS	0xf0
+/* Command/notification rejected */
+#define AVS_STATUS_FAILURE	0xff
+/* Invalid command/notification (unknown) */
+#define AVS_STATUS_INVALID	0xf1
+/* Non-AVS modes are not supported */
+#define AVS_STATUS_NO_SUPP	0xf2
+/* Cannot set P-State until P-Map supplied */
+#define AVS_STATUS_NO_MAP	0xf3
+/* Cannot change P-Map after initial P-Map set */
+#define AVS_STATUS_MAP_SET	0xf4
+/* Max AVS status; higher numbers are used for debugging */
+#define AVS_STATUS_MAX		0xff
+
+/* Other AVS related constants */
+#define AVS_LOOP_LIMIT		10000
+#define AVS_TIMEOUT		300 /* in ms; expected completion is < 10ms */
+#define AVS_FIRMWARE_MAGIC	0xa11600d1
+
+#define BRCM_AVS_CPUFREQ_PREFIX	"brcmstb-avs"
+#define BRCM_AVS_CPUFREQ_NAME	BRCM_AVS_CPUFREQ_PREFIX "-cpufreq"
+#define BRCM_AVS_CPU_DATA	"brcm,avs-cpu-data-mem"
+#define BRCM_AVS_CPU_INTR	"brcm,avs-cpu-l2-intr"
+#define BRCM_AVS_HOST_INTR	"sw_intr"
+
+struct pmap {
+	unsigned int mode;
+	unsigned int p1;
+	unsigned int p2;
+	unsigned int state;
+};
+
+struct private_data {
+	void __iomem *base;
+	void __iomem *avs_intr_base;
+	struct device *dev;
+#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+	struct dentry *debugfs;
+#endif
+	struct completion done;
+	struct semaphore sem;
+	struct pmap pmap;
+};
+
+#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+
+enum debugfs_format {
+	DEBUGFS_NORMAL,
+	DEBUGFS_FLOAT,
+	DEBUGFS_REV,
+};
+
+struct debugfs_data {
+	struct debugfs_entry *entry;
+	struct private_data *priv;
+};
+
+struct debugfs_entry {
+	char *name;
+	u32 offset;
+	fmode_t mode;
+	enum debugfs_format format;
+};
+
+#define DEBUGFS_ENTRY(name, mode, format)	{ \
+	#name, AVS_MBOX_##name, mode, format \
+}
+
+/*
+ * These are used for debugfs only. Otherwise we use AVS_MBOX_PARAM() directly.
+ */
+#define AVS_MBOX_PARAM1		AVS_MBOX_PARAM(0)
+#define AVS_MBOX_PARAM2		AVS_MBOX_PARAM(1)
+#define AVS_MBOX_PARAM3		AVS_MBOX_PARAM(2)
+#define AVS_MBOX_PARAM4		AVS_MBOX_PARAM(3)
+
+/*
+ * This table stores the name, access permissions and offset for each hardware
+ * register and is used to generate debugfs entries.
+ */
+static struct debugfs_entry debugfs_entries[] = {
+	DEBUGFS_ENTRY(COMMAND, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(STATUS, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(VOLTAGE0, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(TEMP0, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(PV0, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(MV0, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(PARAM1, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(PARAM2, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(PARAM3, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(PARAM4, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(REVISION, 0, DEBUGFS_REV),
+	DEBUGFS_ENTRY(PSTATE, 0, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(HEARTBEAT, 0, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(MAGIC, S_IWUSR, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(SIGMA_HVT, 0, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(SIGMA_SVT, 0, DEBUGFS_NORMAL),
+	DEBUGFS_ENTRY(VOLTAGE1, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(TEMP1, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(PV1, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(MV1, 0, DEBUGFS_FLOAT),
+	DEBUGFS_ENTRY(FREQUENCY, 0, DEBUGFS_NORMAL),
+};
+
+static int brcm_avs_target_index(struct cpufreq_policy *, unsigned int);
+
+static char *__strtolower(char *s)
+{
+	char *p;
+
+	for (p = s; *p; p++)
+		*p = tolower(*p);
+
+	return s;
+}
+
+#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
+
+static void __iomem *__map_region(const char *name)
+{
+	struct device_node *np;
+	void __iomem *ptr;
+
+	np = of_find_compatible_node(NULL, NULL, name);
+	if (!np)
+		return NULL;
+
+	ptr = of_iomap(np, 0);
+	of_node_put(np);
+
+	return ptr;
+}
+
+static int __issue_avs_command(struct private_data *priv, int cmd, bool is_send,
+			       u32 args[])
+{
+	unsigned long time_left = msecs_to_jiffies(AVS_TIMEOUT);
+	void __iomem *base = priv->base;
+	unsigned int i;
+	int ret;
+	u32 val;
+
+	ret = down_interruptible(&priv->sem);
+	if (ret)
+		return ret;
+
+	/*
+	 * Make sure no other command is currently running: cmd is 0 if AVS
+	 * co-processor is idle. Due to the guard above, we should almost never
+	 * have to wait here.
+	 */
+	for (i = 0, val = 1; val != 0 && i < AVS_LOOP_LIMIT; i++)
+		val = readl(base + AVS_MBOX_COMMAND);
+
+	/* Give the caller a chance to retry if AVS is busy. */
+	if (i == AVS_LOOP_LIMIT) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	/* Clear status before we begin. */
+	writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS);
+
+	/* We need to send arguments for this command. */
+	if (args && is_send) {
+		for (i = 0; i < AVS_MAX_CMD_ARGS; i++)
+			writel(args[i], base + AVS_MBOX_PARAM(i));
+	}
+
+	/* Protect from spurious interrupts. */
+	reinit_completion(&priv->done);
+
+	/* Now issue the command & tell firmware to wake up to process it. */
+	writel(cmd, base + AVS_MBOX_COMMAND);
+	writel(AVS_CPU_L2_INT_MASK, priv->avs_intr_base + AVS_CPU_L2_SET0);
+
+	/* Wait for AVS co-processor to finish processing the command. */
+	time_left = wait_for_completion_timeout(&priv->done, time_left);
+
+	/*
+	 * If the AVS status is not in the expected range, it means AVS didn't
+	 * complete our command in time, and we return an error. Also, if there
+	 * is no "time left", we timed out waiting for the interrupt.
+	 */
+	val = readl(base + AVS_MBOX_STATUS);
+	if (time_left == 0 || val == 0 || val > AVS_STATUS_MAX) {
+		dev_err(priv->dev, "AVS command %#x didn't complete in time\n",
+			cmd);
+		dev_err(priv->dev, "    Time left: %u ms, AVS status: %#x\n",
+			jiffies_to_msecs(time_left), val);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* This command returned arguments, so we read them back. */
+	if (args && !is_send) {
+		for (i = 0; i < AVS_MAX_CMD_ARGS; i++)
+			args[i] = readl(base + AVS_MBOX_PARAM(i));
+	}
+
+	/* Clear status to tell AVS co-processor we are done. */
+	writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS);
+
+	/* Convert firmware errors to errno's as much as possible. */
+	switch (val) {
+	case AVS_STATUS_INVALID:
+		ret = -EINVAL;
+		break;
+	case AVS_STATUS_NO_SUPP:
+		ret = -ENOTSUPP;
+		break;
+	case AVS_STATUS_NO_MAP:
+		ret = -ENOENT;
+		break;
+	case AVS_STATUS_MAP_SET:
+		ret = -EEXIST;
+		break;
+	case AVS_STATUS_FAILURE:
+		ret = -EIO;
+		break;
+	}
+
+out:
+	up(&priv->sem);
+
+	return ret;
+}
+
+static irqreturn_t irq_handler(int irq, void *data)
+{
+	struct private_data *priv = data;
+
+	/* AVS command completed execution. Wake up __issue_avs_command(). */
+	complete(&priv->done);
+
+	return IRQ_HANDLED;
+}
+
+static char *brcm_avs_mode_to_string(unsigned int mode)
+{
+	switch (mode) {
+	case AVS_MODE_AVS:
+		return "AVS";
+	case AVS_MODE_DFS:
+		return "DFS";
+	case AVS_MODE_DVS:
+		return "DVS";
+	case AVS_MODE_DVFS:
+		return "DVFS";
+	}
+	return NULL;
+}
+
+static void brcm_avs_parse_p1(u32 p1, unsigned int *mdiv_p0, unsigned int *pdiv,
+			      unsigned int *ndiv)
+{
+	*mdiv_p0 = (p1 >> MDIV_P0_SHIFT) & MDIV_P0_MASK;
+	*pdiv = (p1 >> PDIV_SHIFT) & PDIV_MASK;
+	*ndiv = (p1 >> NDIV_INT_SHIFT) & NDIV_INT_MASK;
+}
+
+static void brcm_avs_parse_p2(u32 p2, unsigned int *mdiv_p1,
+			      unsigned int *mdiv_p2, unsigned int *mdiv_p3,
+			      unsigned int *mdiv_p4)
+{
+	*mdiv_p4 = (p2 >> MDIV_P4_SHIFT) & MDIV_P4_MASK;
+	*mdiv_p3 = (p2 >> MDIV_P3_SHIFT) & MDIV_P3_MASK;
+	*mdiv_p2 = (p2 >> MDIV_P2_SHIFT) & MDIV_P2_MASK;
+	*mdiv_p1 = (p2 >> MDIV_P1_SHIFT) & MDIV_P1_MASK;
+}
+
+static int brcm_avs_get_pmap(struct private_data *priv, struct pmap *pmap)
+{
+	u32 args[AVS_MAX_CMD_ARGS];
+	int ret;
+
+	ret = __issue_avs_command(priv, AVS_CMD_GET_PMAP, false, args);
+	if (ret || !pmap)
+		return ret;
+
+	pmap->mode = args[0];
+	pmap->p1 = args[1];
+	pmap->p2 = args[2];
+	pmap->state = args[3];
+
+	return 0;
+}
+
+static int brcm_avs_set_pmap(struct private_data *priv, struct pmap *pmap)
+{
+	u32 args[AVS_MAX_CMD_ARGS];
+
+	args[0] = pmap->mode;
+	args[1] = pmap->p1;
+	args[2] = pmap->p2;
+	args[3] = pmap->state;
+
+	return __issue_avs_command(priv, AVS_CMD_SET_PMAP, true, args);
+}
+
+static int brcm_avs_get_pstate(struct private_data *priv, unsigned int *pstate)
+{
+	u32 args[AVS_MAX_CMD_ARGS];
+	int ret;
+
+	ret = __issue_avs_command(priv, AVS_CMD_GET_PSTATE, false, args);
+	if (ret)
+		return ret;
+	*pstate = args[0];
+
+	return 0;
+}
+
+static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate)
+{
+	u32 args[AVS_MAX_CMD_ARGS];
+
+	args[0] = pstate;
+
+	return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, true, args);
+}
+
+static u32 brcm_avs_get_voltage(void __iomem *base)
+{
+	return readl(base + AVS_MBOX_VOLTAGE1);
+}
+
+static u32 brcm_avs_get_frequency(void __iomem *base)
+{
+	return readl(base + AVS_MBOX_FREQUENCY) * 1000;	/* in kHz */
+}
+
+/*
+ * We determine which frequencies are supported by cycling through all P-states
+ * and reading back what frequency we are running at for each P-state.
+ */
+static struct cpufreq_frequency_table *
+brcm_avs_get_freq_table(struct device *dev, struct private_data *priv)
+{
+	struct cpufreq_frequency_table *table;
+	unsigned int pstate;
+	int i, ret;
+
+	/* Remember P-state for later */
+	ret = brcm_avs_get_pstate(priv, &pstate);
+	if (ret)
+		return ERR_PTR(ret);
+
+	table = devm_kzalloc(dev, (AVS_PSTATE_MAX + 1) * sizeof(*table),
+			     GFP_KERNEL);
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = AVS_PSTATE_P0; i <= AVS_PSTATE_MAX; i++) {
+		ret = brcm_avs_set_pstate(priv, i);
+		if (ret)
+			return ERR_PTR(ret);
+		table[i].frequency = brcm_avs_get_frequency(priv->base);
+		table[i].driver_data = i;
+	}
+	table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* Restore P-state */
+	ret = brcm_avs_set_pstate(priv, pstate);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return table;
+}
+
+#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+
+#define MANT(x)	(unsigned int)(abs((x)) / 1000)
+#define FRAC(x)	(unsigned int)(abs((x)) - abs((x)) / 1000 * 1000)
+
+static int brcm_avs_debug_show(struct seq_file *s, void *data)
+{
+	struct debugfs_data *dbgfs = s->private;
+	void __iomem *base;
+	u32 val, offset;
+
+	if (!dbgfs) {
+		seq_puts(s, "No device pointer\n");
+		return 0;
+	}
+
+	base = dbgfs->priv->base;
+	offset = dbgfs->entry->offset;
+	val = readl(base + offset);
+	switch (dbgfs->entry->format) {
+	case DEBUGFS_NORMAL:
+		seq_printf(s, "%u\n", val);
+		break;
+	case DEBUGFS_FLOAT:
+		seq_printf(s, "%d.%03d\n", MANT(val), FRAC(val));
+		break;
+	case DEBUGFS_REV:
+		seq_printf(s, "%c.%c.%c.%c\n", (val >> 24 & 0xff),
+			   (val >> 16 & 0xff), (val >> 8 & 0xff),
+			   val & 0xff);
+		break;
+	}
+	seq_printf(s, "0x%08x\n", val);
+
+	return 0;
+}
+
+#undef MANT
+#undef FRAC
+
+static ssize_t brcm_avs_seq_write(struct file *file, const char __user *buf,
+				  size_t size, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct debugfs_data *dbgfs = s->private;
+	struct private_data *priv = dbgfs->priv;
+	void __iomem *base, *avs_intr_base;
+	bool use_issue_command = false;
+	unsigned long val, offset;
+	char str[128];
+	int ret;
+	char *str_ptr = str;
+
+	if (size >= sizeof(str))
+		return -E2BIG;
+
+	memset(str, 0, sizeof(str));
+	ret = copy_from_user(str, buf, size);
+	if (ret)
+		return ret;
+
+	base = priv->base;
+	avs_intr_base = priv->avs_intr_base;
+	offset = dbgfs->entry->offset;
+	/*
+	 * Special case writing to "command" entry only: if the string starts
+	 * with a 'c', we use the driver's __issue_avs_command() function.
+	 * Otherwise, we perform a raw write. This should allow testing of raw
+	 * access as well as using the higher level function. (Raw access
+	 * doesn't clear the firmware return status after issuing the command.)
+	 */
+	if (str_ptr[0] == 'c' && offset == AVS_MBOX_COMMAND) {
+		use_issue_command = true;
+		str_ptr++;
+	}
+	if (kstrtoul(str_ptr, 0, &val) != 0)
+		return -EINVAL;
+
+	/*
+	 * Setting the P-state is a special case. We need to update the CPU
+	 * frequency we report.
+	 */
+	if (val == AVS_CMD_SET_PSTATE) {
+		struct cpufreq_policy *policy;
+		unsigned int pstate;
+
+		policy = cpufreq_cpu_get(smp_processor_id());
+		/* Read back the P-state we are about to set */
+		pstate = readl(base + AVS_MBOX_PARAM(0));
+		if (use_issue_command) {
+			ret = brcm_avs_target_index(policy, pstate);
+			return ret ? ret : size;
+		}
+		policy->cur = policy->freq_table[pstate].frequency;
+	}
+
+	if (use_issue_command) {
+		ret = __issue_avs_command(priv, val, false, NULL);
+	} else {
+		/* Locking here is not perfect, but is only for debug. */
+		ret = down_interruptible(&priv->sem);
+		if (ret)
+			return ret;
+
+		writel(val, base + offset);
+		/* We have to wake up the firmware to process a command. */
+		if (offset == AVS_MBOX_COMMAND)
+			writel(AVS_CPU_L2_INT_MASK,
+			       avs_intr_base + AVS_CPU_L2_SET0);
+		up(&priv->sem);
+	}
+
+	return ret ? ret : size;
+}
+
+static struct debugfs_entry *__find_debugfs_entry(const char *name)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++)
+		if (strcasecmp(debugfs_entries[i].name, name) == 0)
+			return &debugfs_entries[i];
+
+	return NULL;
+}
+
+static int brcm_avs_debug_open(struct inode *inode, struct file *file)
+{
+	struct debugfs_data *data;
+	fmode_t fmode;
+	int ret;
+
+	/*
+	 * seq_open(), which is called by single_open(), clears "write" access.
+	 * We need write access to some files, so we preserve our access mode
+	 * and restore it.
+	 */
+	fmode = file->f_mode;
+	/*
+	 * Check access permissions even for root. We don't want to be writing
+	 * to read-only registers. Access for regular users has already been
+	 * checked by the VFS layer.
+	 */
+	if ((fmode & FMODE_WRITER) && !(inode->i_mode & S_IWUSR))
+		return -EACCES;
+
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	/*
+	 * We use the same file system operations for all our debug files. To
+	 * produce specific output, we look up the file name upon opening a
+	 * debugfs entry and map it to a memory offset. This offset is then used
+	 * in the generic "show" function to read a specific register.
+	 */
+	data->entry = __find_debugfs_entry(file->f_path.dentry->d_iname);
+	data->priv = inode->i_private;
+
+	ret = single_open(file, brcm_avs_debug_show, data);
+	if (ret)
+		kfree(data);
+	file->f_mode = fmode;
+
+	return ret;
+}
+
+static int brcm_avs_debug_release(struct inode *inode, struct file *file)
+{
+	struct seq_file *seq_priv = file->private_data;
+	struct debugfs_data *data = seq_priv->private;
+
+	kfree(data);
+	return single_release(inode, file);
+}
+
+static const struct file_operations brcm_avs_debug_ops = {
+	.open		= brcm_avs_debug_open,
+	.read		= seq_read,
+	.write		= brcm_avs_seq_write,
+	.llseek		= seq_lseek,
+	.release	= brcm_avs_debug_release,
+};
+
+static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev)
+{
+	struct private_data *priv = platform_get_drvdata(pdev);
+	struct dentry *dir;
+	int i;
+
+	if (!priv)
+		return;
+
+	dir = debugfs_create_dir(BRCM_AVS_CPUFREQ_NAME, NULL);
+	if (IS_ERR_OR_NULL(dir))
+		return;
+	priv->debugfs = dir;
+
+	for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++) {
+		/*
+		 * The DEBUGFS_ENTRY macro generates uppercase strings. We
+		 * convert them to lowercase before creating the debugfs
+		 * entries.
+		 */
+		char *entry = __strtolower(debugfs_entries[i].name);
+		fmode_t mode = debugfs_entries[i].mode;
+
+		if (!debugfs_create_file(entry, S_IFREG | S_IRUGO | mode,
+					 dir, priv, &brcm_avs_debug_ops)) {
+			priv->debugfs = NULL;
+			debugfs_remove_recursive(dir);
+			break;
+		}
+	}
+}
+
+static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev)
+{
+	struct private_data *priv = platform_get_drvdata(pdev);
+
+	if (priv && priv->debugfs) {
+		debugfs_remove_recursive(priv->debugfs);
+		priv->debugfs = NULL;
+	}
+}
+
+#else
+
+static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev) {}
+static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev) {}
+
+#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
+
+/*
+ * To ensure the right firmware is running we need to
+ *    - check the MAGIC matches what we expect
+ *    - brcm_avs_get_pmap() doesn't return -ENOTSUPP or -EINVAL
+ * We need to set up our interrupt handling before calling brcm_avs_get_pmap()!
+ */
+static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
+{
+	u32 magic;
+	int rc;
+
+	rc = brcm_avs_get_pmap(priv, NULL);
+	magic = readl(priv->base + AVS_MBOX_MAGIC);
+
+	return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) ||
+		(rc != -EINVAL));
+}
+
+static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	struct private_data *priv = policy->driver_data;
+
+	return brcm_avs_get_frequency(priv->base);
+}
+
+static int brcm_avs_target_index(struct cpufreq_policy *policy,
+				 unsigned int index)
+{
+	return brcm_avs_set_pstate(policy->driver_data,
+				  policy->freq_table[index].driver_data);
+}
+
+static int brcm_avs_suspend(struct cpufreq_policy *policy)
+{
+	struct private_data *priv = policy->driver_data;
+	int ret;
+
+	ret = brcm_avs_get_pmap(priv, &priv->pmap);
+	if (ret)
+		return ret;
+
+	/*
+	 * We can't use the P-state returned by brcm_avs_get_pmap(), since
+	 * that's the initial P-state from when the P-map was downloaded to the
+	 * AVS co-processor, not necessarily the P-state we are running at now.
+	 * So, we get the current P-state explicitly.
+	 */
+	return brcm_avs_get_pstate(priv, &priv->pmap.state);
+}
+
+static int brcm_avs_resume(struct cpufreq_policy *policy)
+{
+	struct private_data *priv = policy->driver_data;
+	int ret;
+
+	ret = brcm_avs_set_pmap(priv, &priv->pmap);
+	if (ret == -EEXIST) {
+		struct platform_device *pdev  = cpufreq_get_driver_data();
+		struct device *dev = &pdev->dev;
+
+		dev_warn(dev, "PMAP was already set\n");
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/*
+ * All initialization code that we only want to execute once goes here. Setup
+ * code that can be re-tried on every core (if it failed before) can go into
+ * brcm_avs_cpufreq_init().
+ */
+static int brcm_avs_prepare_init(struct platform_device *pdev)
+{
+	struct private_data *priv;
+	struct device *dev;
+	int host_irq, ret;
+
+	dev = &pdev->dev;
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	sema_init(&priv->sem, 1);
+	init_completion(&priv->done);
+	platform_set_drvdata(pdev, priv);
+
+	priv->base = __map_region(BRCM_AVS_CPU_DATA);
+	if (!priv->base) {
+		dev_err(dev, "Couldn't find property %s in device tree.\n",
+			BRCM_AVS_CPU_DATA);
+		return -ENOENT;
+	}
+
+	priv->avs_intr_base = __map_region(BRCM_AVS_CPU_INTR);
+	if (!priv->avs_intr_base) {
+		dev_err(dev, "Couldn't find property %s in device tree.\n",
+			BRCM_AVS_CPU_INTR);
+		ret = -ENOENT;
+		goto unmap_base;
+	}
+
+	host_irq = platform_get_irq_byname(pdev, BRCM_AVS_HOST_INTR);
+	if (host_irq < 0) {
+		dev_err(dev, "Couldn't find interrupt %s -- %d\n",
+			BRCM_AVS_HOST_INTR, host_irq);
+		ret = host_irq;
+		goto unmap_intr_base;
+	}
+
+	ret = devm_request_irq(dev, host_irq, irq_handler, IRQF_TRIGGER_RISING,
+			       BRCM_AVS_HOST_INTR, priv);
+	if (ret) {
+		dev_err(dev, "IRQ request failed: %s (%d) -- %d\n",
+			BRCM_AVS_HOST_INTR, host_irq, ret);
+		goto unmap_intr_base;
+	}
+
+	if (brcm_avs_is_firmware_loaded(priv))
+		return 0;
+
+	dev_err(dev, "AVS firmware is not loaded or doesn't support DVFS\n");
+	ret = -ENODEV;
+
+unmap_intr_base:
+	iounmap(priv->avs_intr_base);
+unmap_base:
+	iounmap(priv->base);
+
+	return ret;
+}
+
+static int brcm_avs_cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *freq_table;
+	struct platform_device *pdev;
+	struct private_data *priv;
+	struct device *dev;
+	int ret;
+
+	pdev = cpufreq_get_driver_data();
+	priv = platform_get_drvdata(pdev);
+	policy->driver_data = priv;
+	dev = &pdev->dev;
+
+	freq_table = brcm_avs_get_freq_table(dev, priv);
+	if (IS_ERR(freq_table)) {
+		ret = PTR_ERR(freq_table);
+		dev_err(dev, "Couldn't determine frequency table (%d).\n", ret);
+		return ret;
+	}
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		dev_err(dev, "invalid frequency table: %d\n", ret);
+		return ret;
+	}
+
+	/* All cores share the same clock and thus the same policy. */
+	cpumask_setall(policy->cpus);
+
+	ret = __issue_avs_command(priv, AVS_CMD_ENABLE, false, NULL);
+	if (!ret) {
+		unsigned int pstate;
+
+		ret = brcm_avs_get_pstate(priv, &pstate);
+		if (!ret) {
+			policy->cur = freq_table[pstate].frequency;
+			dev_info(dev, "registered\n");
+			return 0;
+		}
+	}
+
+	dev_err(dev, "couldn't initialize driver (%d)\n", ret);
+
+	return ret;
+}
+
+static ssize_t show_brcm_avs_pstate(struct cpufreq_policy *policy, char *buf)
+{
+	struct private_data *priv = policy->driver_data;
+	unsigned int pstate;
+
+	if (brcm_avs_get_pstate(priv, &pstate))
+		return sprintf(buf, "<unknown>\n");
+
+	return sprintf(buf, "%u\n", pstate);
+}
+
+static ssize_t show_brcm_avs_mode(struct cpufreq_policy *policy, char *buf)
+{
+	struct private_data *priv = policy->driver_data;
+	struct pmap pmap;
+
+	if (brcm_avs_get_pmap(priv, &pmap))
+		return sprintf(buf, "<unknown>\n");
+
+	return sprintf(buf, "%s %u\n", brcm_avs_mode_to_string(pmap.mode),
+		pmap.mode);
+}
+
+static ssize_t show_brcm_avs_pmap(struct cpufreq_policy *policy, char *buf)
+{
+	unsigned int mdiv_p0, mdiv_p1, mdiv_p2, mdiv_p3, mdiv_p4;
+	struct private_data *priv = policy->driver_data;
+	unsigned int ndiv, pdiv;
+	struct pmap pmap;
+
+	if (brcm_avs_get_pmap(priv, &pmap))
+		return sprintf(buf, "<unknown>\n");
+
+	brcm_avs_parse_p1(pmap.p1, &mdiv_p0, &pdiv, &ndiv);
+	brcm_avs_parse_p2(pmap.p2, &mdiv_p1, &mdiv_p2, &mdiv_p3, &mdiv_p4);
+
+	return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u %u %u\n",
+		pmap.p1, pmap.p2, ndiv, pdiv, mdiv_p0, mdiv_p1, mdiv_p2,
+		mdiv_p3, mdiv_p4, pmap.mode, pmap.state);
+}
+
+static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf)
+{
+	struct private_data *priv = policy->driver_data;
+
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base));
+}
+
+static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf)
+{
+	struct private_data *priv = policy->driver_data;
+
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base));
+}
+
+cpufreq_freq_attr_ro(brcm_avs_pstate);
+cpufreq_freq_attr_ro(brcm_avs_mode);
+cpufreq_freq_attr_ro(brcm_avs_pmap);
+cpufreq_freq_attr_ro(brcm_avs_voltage);
+cpufreq_freq_attr_ro(brcm_avs_frequency);
+
+static struct freq_attr *brcm_avs_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&brcm_avs_pstate,
+	&brcm_avs_mode,
+	&brcm_avs_pmap,
+	&brcm_avs_voltage,
+	&brcm_avs_frequency,
+	NULL
+};
+
+static struct cpufreq_driver brcm_avs_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= brcm_avs_target_index,
+	.get		= brcm_avs_cpufreq_get,
+	.suspend	= brcm_avs_suspend,
+	.resume		= brcm_avs_resume,
+	.init		= brcm_avs_cpufreq_init,
+	.attr		= brcm_avs_cpufreq_attr,
+	.name		= BRCM_AVS_CPUFREQ_PREFIX,
+};
+
+static int brcm_avs_cpufreq_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = brcm_avs_prepare_init(pdev);
+	if (ret)
+		return ret;
+
+	brcm_avs_driver.driver_data = pdev;
+	ret = cpufreq_register_driver(&brcm_avs_driver);
+	if (!ret)
+		brcm_avs_cpufreq_debug_init(pdev);
+
+	return ret;
+}
+
+static int brcm_avs_cpufreq_remove(struct platform_device *pdev)
+{
+	struct private_data *priv;
+	int ret;
+
+	ret = cpufreq_unregister_driver(&brcm_avs_driver);
+	if (ret)
+		return ret;
+
+	brcm_avs_cpufreq_debug_exit(pdev);
+
+	priv = platform_get_drvdata(pdev);
+	iounmap(priv->base);
+	iounmap(priv->avs_intr_base);
+
+	return 0;
+}
+
+static const struct of_device_id brcm_avs_cpufreq_match[] = {
+	{ .compatible = BRCM_AVS_CPU_DATA },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, brcm_avs_cpufreq_match);
+
+static struct platform_driver brcm_avs_cpufreq_platdrv = {
+	.driver = {
+		.name	= BRCM_AVS_CPUFREQ_NAME,
+		.of_match_table = brcm_avs_cpufreq_match,
+	},
+	.probe		= brcm_avs_cpufreq_probe,
+	.remove		= brcm_avs_cpufreq_remove,
+};
+module_platform_driver(brcm_avs_cpufreq_platdrv);
+
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("CPUfreq driver for Broadcom STB AVS");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cppc_cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/cppc_cpufreq.c
new file mode 100644
index 0000000..c9ce716
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cppc_cpufreq.c
@@ -0,0 +1,328 @@
+/*
+ * CPPC (Collaborative Processor Performance Control) driver for
+ * interfacing with the CPUfreq layer and governors. See
+ * cppc_acpi.c for CPPC specific methods.
+ *
+ * (C) Copyright 2014, 2015 Linaro Ltd.
+ * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt)	"CPPC Cpufreq:"	fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/dmi.h>
+#include <linux/time.h>
+#include <linux/vmalloc.h>
+
+#include <asm/unaligned.h>
+
+#include <acpi/cppc_acpi.h>
+
+/* Minimum struct length needed for the DMI processor entry we want */
+#define DMI_ENTRY_PROCESSOR_MIN_LENGTH	48
+
+/* Offest in the DMI processor structure for the max frequency */
+#define DMI_PROCESSOR_MAX_SPEED  0x14
+
+/*
+ * These structs contain information parsed from per CPU
+ * ACPI _CPC structures.
+ * e.g. For each CPU the highest, lowest supported
+ * performance capabilities, desired performance level
+ * requested etc.
+ */
+static struct cppc_cpudata **all_cpu_data;
+
+/* Capture the max KHz from DMI */
+static u64 cppc_dmi_max_khz;
+
+/* Callback function used to retrieve the max frequency from DMI */
+static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
+{
+	const u8 *dmi_data = (const u8 *)dm;
+	u16 *mhz = (u16 *)private;
+
+	if (dm->type == DMI_ENTRY_PROCESSOR &&
+	    dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
+		u16 val = (u16)get_unaligned((const u16 *)
+				(dmi_data + DMI_PROCESSOR_MAX_SPEED));
+		*mhz = val > *mhz ? val : *mhz;
+	}
+}
+
+/* Look up the max frequency in DMI */
+static u64 cppc_get_dmi_max_khz(void)
+{
+	u16 mhz = 0;
+
+	dmi_walk(cppc_find_dmi_mhz, &mhz);
+
+	/*
+	 * Real stupid fallback value, just in case there is no
+	 * actual value set.
+	 */
+	mhz = mhz ? mhz : 1;
+
+	return (1000 * mhz);
+}
+
+static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
+		unsigned int target_freq,
+		unsigned int relation)
+{
+	struct cppc_cpudata *cpu;
+	struct cpufreq_freqs freqs;
+	u32 desired_perf;
+	int ret = 0;
+
+	cpu = all_cpu_data[policy->cpu];
+
+	desired_perf = (u64)target_freq * cpu->perf_caps.highest_perf / cppc_dmi_max_khz;
+	/* Return if it is exactly the same perf */
+	if (desired_perf == cpu->perf_ctrls.desired_perf)
+		return ret;
+
+	cpu->perf_ctrls.desired_perf = desired_perf;
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls);
+	cpufreq_freq_transition_end(policy, &freqs, ret != 0);
+
+	if (ret)
+		pr_debug("Failed to set target on CPU:%d. ret:%d\n",
+				cpu->cpu, ret);
+
+	return ret;
+}
+
+static int cppc_verify_policy(struct cpufreq_policy *policy)
+{
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy)
+{
+	int cpu_num = policy->cpu;
+	struct cppc_cpudata *cpu = all_cpu_data[cpu_num];
+	int ret;
+
+	cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf;
+
+	ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
+	if (ret)
+		pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
+				cpu->perf_caps.lowest_perf, cpu_num, ret);
+}
+
+/*
+ * The PCC subspace describes the rate at which platform can accept commands
+ * on the shared PCC channel (including READs which do not count towards freq
+ * trasition requests), so ideally we need to use the PCC values as a fallback
+ * if we don't have a platform specific transition_delay_us
+ */
+#ifdef CONFIG_ARM64
+#include <asm/cputype.h>
+
+static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu)
+{
+	unsigned long implementor = read_cpuid_implementor();
+	unsigned long part_num = read_cpuid_part_number();
+	unsigned int delay_us = 0;
+
+	switch (implementor) {
+	case ARM_CPU_IMP_QCOM:
+		switch (part_num) {
+		case QCOM_CPU_PART_FALKOR_V1:
+		case QCOM_CPU_PART_FALKOR:
+			delay_us = 10000;
+			break;
+		default:
+			delay_us = cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
+			break;
+		}
+		break;
+	default:
+		delay_us = cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
+		break;
+	}
+
+	return delay_us;
+}
+
+#else
+
+static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu)
+{
+	return cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
+}
+#endif
+
+static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cppc_cpudata *cpu;
+	unsigned int cpu_num = policy->cpu;
+	int ret = 0;
+
+	cpu = all_cpu_data[policy->cpu];
+
+	cpu->cpu = cpu_num;
+	ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps);
+
+	if (ret) {
+		pr_debug("Err reading CPU%d perf capabilities. ret:%d\n",
+				cpu_num, ret);
+		return ret;
+	}
+
+	cppc_dmi_max_khz = cppc_get_dmi_max_khz();
+
+	/*
+	 * Set min to lowest nonlinear perf to avoid any efficiency penalty (see
+	 * Section 8.4.7.1.1.5 of ACPI 6.1 spec)
+	 */
+	policy->min = cpu->perf_caps.lowest_nonlinear_perf * cppc_dmi_max_khz /
+		cpu->perf_caps.highest_perf;
+	policy->max = cppc_dmi_max_khz;
+
+	/*
+	 * Set cpuinfo.min_freq to Lowest to make the full range of performance
+	 * available if userspace wants to use any perf between lowest & lowest
+	 * nonlinear perf
+	 */
+	policy->cpuinfo.min_freq = cpu->perf_caps.lowest_perf * cppc_dmi_max_khz /
+		cpu->perf_caps.highest_perf;
+	policy->cpuinfo.max_freq = cppc_dmi_max_khz;
+
+	policy->cpuinfo.transition_latency = cppc_get_transition_latency(cpu_num);
+	policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu_num);
+	policy->shared_type = cpu->shared_type;
+
+	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+		int i;
+
+		cpumask_copy(policy->cpus, cpu->shared_cpu_map);
+
+		for_each_cpu(i, policy->cpus) {
+			if (unlikely(i == policy->cpu))
+				continue;
+
+			memcpy(&all_cpu_data[i]->perf_caps, &cpu->perf_caps,
+			       sizeof(cpu->perf_caps));
+		}
+	} else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
+		/* Support only SW_ANY for now. */
+		pr_debug("Unsupported CPU co-ord type\n");
+		return -EFAULT;
+	}
+
+	cpu->cur_policy = policy;
+
+	/* Set policy->cur to max now. The governors will adjust later. */
+	policy->cur = cppc_dmi_max_khz;
+	cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf;
+
+	ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
+	if (ret)
+		pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
+				cpu->perf_caps.highest_perf, cpu_num, ret);
+
+	return ret;
+}
+
+static struct cpufreq_driver cppc_cpufreq_driver = {
+	.flags = CPUFREQ_CONST_LOOPS,
+	.verify = cppc_verify_policy,
+	.target = cppc_cpufreq_set_target,
+	.init = cppc_cpufreq_cpu_init,
+	.stop_cpu = cppc_cpufreq_stop_cpu,
+	.name = "cppc_cpufreq",
+};
+
+static int __init cppc_cpufreq_init(void)
+{
+	int i, ret = 0;
+	struct cppc_cpudata *cpu;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	all_cpu_data = kzalloc(sizeof(void *) * num_possible_cpus(), GFP_KERNEL);
+	if (!all_cpu_data)
+		return -ENOMEM;
+
+	for_each_possible_cpu(i) {
+		all_cpu_data[i] = kzalloc(sizeof(struct cppc_cpudata), GFP_KERNEL);
+		if (!all_cpu_data[i])
+			goto out;
+
+		cpu = all_cpu_data[i];
+		if (!zalloc_cpumask_var(&cpu->shared_cpu_map, GFP_KERNEL))
+			goto out;
+	}
+
+	ret = acpi_get_psd_map(all_cpu_data);
+	if (ret) {
+		pr_debug("Error parsing PSD data. Aborting cpufreq registration.\n");
+		goto out;
+	}
+
+	ret = cpufreq_register_driver(&cppc_cpufreq_driver);
+	if (ret)
+		goto out;
+
+	return ret;
+
+out:
+	for_each_possible_cpu(i) {
+		cpu = all_cpu_data[i];
+		if (!cpu)
+			break;
+		free_cpumask_var(cpu->shared_cpu_map);
+		kfree(cpu);
+	}
+
+	kfree(all_cpu_data);
+	return -ENODEV;
+}
+
+static void __exit cppc_cpufreq_exit(void)
+{
+	struct cppc_cpudata *cpu;
+	int i;
+
+	cpufreq_unregister_driver(&cppc_cpufreq_driver);
+
+	for_each_possible_cpu(i) {
+		cpu = all_cpu_data[i];
+		free_cpumask_var(cpu->shared_cpu_map);
+		kfree(cpu);
+	}
+
+	kfree(all_cpu_data);
+}
+
+module_exit(cppc_cpufreq_exit);
+MODULE_AUTHOR("Ashwin Chaugule");
+MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
+MODULE_LICENSE("GPL");
+
+late_initcall(cppc_cpufreq_init);
+
+static const struct acpi_device_id cppc_acpi_ids[] = {
+	{ACPI_PROCESSOR_DEVICE_HID, },
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, cppc_acpi_ids);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt-platdev.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt-platdev.c
new file mode 100644
index 0000000..9e0aa76
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2016 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "cpufreq-dt.h"
+
+/*
+ * Machines for which the cpufreq device is *always* created, mostly used for
+ * platforms using "operating-points" (V1) property.
+ */
+static const struct of_device_id whitelist[] __initconst = {
+	{ .compatible = "allwinner,sun4i-a10", },
+	{ .compatible = "allwinner,sun5i-a10s", },
+	{ .compatible = "allwinner,sun5i-a13", },
+	{ .compatible = "allwinner,sun5i-r8", },
+	{ .compatible = "allwinner,sun6i-a31", },
+	{ .compatible = "allwinner,sun6i-a31s", },
+	{ .compatible = "allwinner,sun7i-a20", },
+	{ .compatible = "allwinner,sun8i-a23", },
+	{ .compatible = "allwinner,sun8i-a83t", },
+	{ .compatible = "allwinner,sun8i-h3", },
+
+	{ .compatible = "apm,xgene-shadowcat", },
+
+	{ .compatible = "arm,integrator-ap", },
+	{ .compatible = "arm,integrator-cp", },
+
+	{ .compatible = "hisilicon,hi3660", },
+
+	{ .compatible = "fsl,imx27", },
+	{ .compatible = "fsl,imx51", },
+	{ .compatible = "fsl,imx53", },
+	{ .compatible = "fsl,imx7d", },
+
+	{ .compatible = "marvell,berlin", },
+	{ .compatible = "marvell,pxa250", },
+	{ .compatible = "marvell,pxa270", },
+
+	{ .compatible = "samsung,exynos3250", },
+	{ .compatible = "samsung,exynos4210", },
+	{ .compatible = "samsung,exynos4212", },
+	{ .compatible = "samsung,exynos5250", },
+#ifndef CONFIG_BL_SWITCHER
+	{ .compatible = "samsung,exynos5800", },
+#endif
+
+	{ .compatible = "renesas,emev2", },
+	{ .compatible = "renesas,r7s72100", },
+	{ .compatible = "renesas,r8a73a4", },
+	{ .compatible = "renesas,r8a7740", },
+	{ .compatible = "renesas,r8a7743", },
+	{ .compatible = "renesas,r8a7745", },
+	{ .compatible = "renesas,r8a7778", },
+	{ .compatible = "renesas,r8a7779", },
+	{ .compatible = "renesas,r8a7790", },
+	{ .compatible = "renesas,r8a7791", },
+	{ .compatible = "renesas,r8a7792", },
+	{ .compatible = "renesas,r8a7793", },
+	{ .compatible = "renesas,r8a7794", },
+	{ .compatible = "renesas,r8a7795", },
+	{ .compatible = "renesas,r8a7796", },
+	{ .compatible = "renesas,sh73a0", },
+
+	{ .compatible = "rockchip,rk2928", },
+	{ .compatible = "rockchip,rk3036", },
+	{ .compatible = "rockchip,rk3066a", },
+	{ .compatible = "rockchip,rk3066b", },
+	{ .compatible = "rockchip,rk3188", },
+	{ .compatible = "rockchip,rk3228", },
+	{ .compatible = "rockchip,rk3288", },
+	{ .compatible = "rockchip,rk3328", },
+	{ .compatible = "rockchip,rk3366", },
+	{ .compatible = "rockchip,rk3368", },
+	{ .compatible = "rockchip,rk3399", },
+
+	{ .compatible = "socionext,uniphier-ld6b", },
+
+	{ .compatible = "st-ericsson,u8500", },
+	{ .compatible = "st-ericsson,u8540", },
+	{ .compatible = "st-ericsson,u9500", },
+	{ .compatible = "st-ericsson,u9540", },
+
+	{ .compatible = "ti,omap2", },
+	{ .compatible = "ti,omap3", },
+	{ .compatible = "ti,omap4", },
+	{ .compatible = "ti,omap5", },
+
+	{ .compatible = "xlnx,zynq-7000", },
+	{ .compatible = "xlnx,zynqmp", },
+
+	{ }
+};
+
+/*
+ * Machines for which the cpufreq device is *not* created, mostly used for
+ * platforms using "operating-points-v2" property.
+ */
+static const struct of_device_id blacklist[] __initconst = {
+	{ .compatible = "calxeda,highbank", },
+	{ .compatible = "calxeda,ecx-2000", },
+
+	{ .compatible = "marvell,armadaxp", },
+
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt2712", },
+	{ .compatible = "mediatek,mt7622", },
+	{ .compatible = "mediatek,mt7623", },
+	{ .compatible = "mediatek,mt817x", },
+	{ .compatible = "mediatek,mt8173", },
+	{ .compatible = "mediatek,mt8176", },
+
+	{ .compatible = "nvidia,tegra124", },
+
+	{ .compatible = "st,stih407", },
+	{ .compatible = "st,stih410", },
+
+	{ .compatible = "sigma,tango4", },
+
+	{ .compatible = "ti,am33xx", },
+	{ .compatible = "ti,am43", },
+	{ .compatible = "ti,dra7", },
+
+	{ }
+};
+
+static bool __init cpu0_node_has_opp_v2_prop(void)
+{
+	struct device_node *np = of_cpu_device_node_get(0);
+	bool ret = false;
+
+	if (of_get_property(np, "operating-points-v2", NULL))
+		ret = true;
+
+	of_node_put(np);
+	return ret;
+}
+
+static int __init cpufreq_dt_platdev_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	const void *data = NULL;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(whitelist, np);
+	if (match) {
+		data = match->data;
+		goto create_pdev;
+	}
+
+	if (cpu0_node_has_opp_v2_prop() && !of_match_node(blacklist, np))
+		goto create_pdev;
+
+	of_node_put(np);
+	return -ENODEV;
+
+create_pdev:
+	of_node_put(np);
+	return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt",
+			       -1, data,
+			       sizeof(struct cpufreq_dt_platform_data)));
+}
+device_initcall(cpufreq_dt_platdev_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.c
new file mode 100644
index 0000000..9546218
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2014 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "cpufreq-dt.h"
+
+struct private_data {
+	struct opp_table *opp_table;
+	struct device *cpu_dev;
+	struct thermal_cooling_device *cdev;
+	const char *reg_name;
+	bool have_static_opps;
+};
+
+static struct freq_attr *cpufreq_dt_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,   /* Extra space for boost-attr if required */
+	NULL,
+};
+
+static int set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	struct private_data *priv = policy->driver_data;
+	unsigned long freq = policy->freq_table[index].frequency;
+	int ret;
+
+	ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
+
+	if (!ret) {
+		arch_set_freq_scale(policy->related_cpus, freq,
+				    policy->cpuinfo.max_freq);
+	}
+
+	return ret;
+}
+
+/*
+ * An earlier version of opp-v1 bindings used to name the regulator
+ * "cpu0-supply", we still need to handle that for backwards compatibility.
+ */
+static const char *find_supply_name(struct device *dev)
+{
+	struct device_node *np;
+	struct property *pp;
+	int cpu = dev->id;
+	const char *name = NULL;
+
+	np = of_node_get(dev->of_node);
+
+	/* This must be valid for sure */
+	if (WARN_ON(!np))
+		return NULL;
+
+	/* Try "cpu0" for older DTs */
+	if (!cpu) {
+		pp = of_find_property(np, "cpu0-supply", NULL);
+		if (pp) {
+			name = "cpu0";
+			goto node_put;
+		}
+	}
+
+	pp = of_find_property(np, "cpu-supply", NULL);
+	if (pp) {
+		name = "cpu";
+		goto node_put;
+	}
+
+	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
+node_put:
+	of_node_put(np);
+	return name;
+}
+
+static int resources_available(void)
+{
+	struct device *cpu_dev;
+	struct regulator *cpu_reg;
+	struct clk *cpu_clk;
+	int ret = 0;
+	const char *name;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu0 device\n");
+		return -ENODEV;
+	}
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
+	if (ret) {
+		/*
+		 * If cpu's clk node is present, but clock is not yet
+		 * registered, we should try defering probe.
+		 */
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(cpu_dev, "clock not ready, retry\n");
+		else
+			dev_err(cpu_dev, "failed to get clock: %d\n", ret);
+
+		return ret;
+	}
+
+	clk_put(cpu_clk);
+
+	name = find_supply_name(cpu_dev);
+	/* Platform doesn't require regulator */
+	if (!name)
+		return 0;
+
+	cpu_reg = regulator_get_optional(cpu_dev, name);
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
+		/*
+		 * If cpu's regulator supply node is present, but regulator is
+		 * not yet registered, we should try defering probe.
+		 */
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
+		else
+			dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
+
+		return ret;
+	}
+
+	regulator_put(cpu_reg);
+	return 0;
+}
+
+static int cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *freq_table;
+	struct opp_table *opp_table = NULL;
+	struct private_data *priv;
+	struct device *cpu_dev;
+	struct clk *cpu_clk;
+	unsigned int transition_latency;
+	bool fallback = false;
+	const char *name;
+	int ret;
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/* Get OPP-sharing information from "operating-points-v2" bindings */
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
+	if (ret) {
+		if (ret != -ENOENT)
+			goto out_put_clk;
+
+		/*
+		 * operating-points-v2 not supported, fallback to old method of
+		 * finding shared-OPPs for backward compatibility if the
+		 * platform hasn't set sharing CPUs.
+		 */
+		if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
+			fallback = true;
+	}
+
+	/*
+	 * OPP layer will be taking care of regulators now, but it needs to know
+	 * the name of the regulator first.
+	 */
+	name = find_supply_name(cpu_dev);
+	if (name) {
+		opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
+		if (IS_ERR(opp_table)) {
+			ret = PTR_ERR(opp_table);
+			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
+				policy->cpu, ret);
+			goto out_put_clk;
+		}
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_put_regulator;
+	}
+
+	priv->reg_name = name;
+	priv->opp_table = opp_table;
+
+	/*
+	 * Initialize OPP tables for all policy->cpus. They will be shared by
+	 * all CPUs which have marked their CPUs shared with OPP bindings.
+	 *
+	 * For platforms not using operating-points-v2 bindings, we do this
+	 * before updating policy->cpus. Otherwise, we will end up creating
+	 * duplicate OPPs for policy->cpus.
+	 *
+	 * OPPs might be populated at runtime, don't check for error here
+	 */
+	if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
+		priv->have_static_opps = true;
+
+	/*
+	 * But we need OPP table to function so if it is not there let's
+	 * give platform code chance to provide it for us.
+	 */
+	ret = dev_pm_opp_get_opp_count(cpu_dev);
+	if (ret <= 0) {
+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
+		ret = -EPROBE_DEFER;
+		goto out_free_opp;
+	}
+
+	if (fallback) {
+		cpumask_setall(policy->cpus);
+
+		/*
+		 * OPP tables are initialized only for policy->cpu, do it for
+		 * others as well.
+		 */
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+		goto out_free_opp;
+	}
+
+	priv->cpu_dev = cpu_dev;
+	policy->driver_data = priv;
+	policy->clk = cpu_clk;
+
+	policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+			ret);
+		goto out_free_cpufreq_table;
+	}
+
+	/* Support turbo/boost mode */
+	if (policy_has_boost_freq(policy)) {
+		/* This gets disabled by core on driver unregister */
+		ret = cpufreq_enable_boost_support();
+		if (ret)
+			goto out_free_cpufreq_table;
+		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
+	}
+
+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
+	if (!transition_latency)
+		transition_latency = CPUFREQ_ETERNAL;
+
+	policy->cpuinfo.transition_latency = transition_latency;
+	policy->dvfs_possible_from_any_cpu = true;
+
+	return 0;
+
+out_free_cpufreq_table:
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_opp:
+	if (priv->have_static_opps)
+		dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+	kfree(priv);
+out_put_regulator:
+	if (name)
+		dev_pm_opp_put_regulators(opp_table);
+out_put_clk:
+	clk_put(cpu_clk);
+
+	return ret;
+}
+
+static int cpufreq_exit(struct cpufreq_policy *policy)
+{
+	struct private_data *priv = policy->driver_data;
+
+	cpufreq_cooling_unregister(priv->cdev);
+	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
+	if (priv->have_static_opps)
+		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	if (priv->reg_name)
+		dev_pm_opp_put_regulators(priv->opp_table);
+
+	clk_put(policy->clk);
+	kfree(priv);
+
+	return 0;
+}
+
+static void cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct private_data *priv = policy->driver_data;
+	struct device_node *np = of_node_get(priv->cpu_dev->of_node);
+
+	if (WARN_ON(!np))
+		return;
+
+	/*
+	 * For now, just loading the cooling device;
+	 * thermal DT code takes care of matching them.
+	 */
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		u32 power_coefficient = 0;
+
+		of_property_read_u32(np, "dynamic-power-coefficient",
+				     &power_coefficient);
+
+		priv->cdev = of_cpufreq_power_cooling_register(np,
+				policy, power_coefficient, NULL);
+		if (IS_ERR(priv->cdev)) {
+			dev_err(priv->cpu_dev,
+				"running cpufreq without cooling device: %ld\n",
+				PTR_ERR(priv->cdev));
+
+			priv->cdev = NULL;
+		}
+	}
+
+	of_node_put(np);
+}
+
+static struct cpufreq_driver dt_cpufreq_driver = {
+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = set_target,
+	.get = cpufreq_generic_get,
+	.init = cpufreq_init,
+	.exit = cpufreq_exit,
+	.ready = cpufreq_ready,
+	.name = "cpufreq-dt",
+	.attr = cpufreq_dt_attr,
+	.suspend = cpufreq_generic_suspend,
+};
+
+static int dt_cpufreq_probe(struct platform_device *pdev)
+{
+	struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
+	int ret;
+
+	/*
+	 * All per-cluster (CPUs sharing clock/voltages) initialization is done
+	 * from ->init(). In probe(), we just need to make sure that clk and
+	 * regulators are available. Else defer probe and retry.
+	 *
+	 * FIXME: Is checking this only for CPU0 sufficient ?
+	 */
+	ret = resources_available();
+	if (ret)
+		return ret;
+
+	if (data && data->have_governor_per_policy)
+		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+
+	ret = cpufreq_register_driver(&dt_cpufreq_driver);
+	if (ret)
+		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
+
+	return ret;
+}
+
+static int dt_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&dt_cpufreq_driver);
+	return 0;
+}
+
+static struct platform_driver dt_cpufreq_platdrv = {
+	.driver = {
+		.name	= "cpufreq-dt",
+	},
+	.probe		= dt_cpufreq_probe,
+	.remove		= dt_cpufreq_remove,
+};
+module_platform_driver(dt_cpufreq_platdrv);
+
+MODULE_ALIAS("platform:cpufreq-dt");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Generic cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.h b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.h
new file mode 100644
index 0000000..54d774e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-dt.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2016 Linaro
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CPUFREQ_DT_H__
+#define __CPUFREQ_DT_H__
+
+#include <linux/types.h>
+
+struct cpufreq_dt_platform_data {
+	bool have_governor_per_policy;
+};
+
+#endif /* __CPUFREQ_DT_H__ */
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-nforce2.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-nforce2.c
new file mode 100644
index 0000000..dbf82f3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq-nforce2.c
@@ -0,0 +1,441 @@
+/*
+ * (C) 2004-2006  Sebastian Witt <se.witt@gmx.net>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#define NFORCE2_XTAL 25
+#define NFORCE2_BOOTFSB 0x48
+#define NFORCE2_PLLENABLE 0xa8
+#define NFORCE2_PLLREG 0xa4
+#define NFORCE2_PLLADR 0xa0
+#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
+
+#define NFORCE2_MIN_FSB 50
+#define NFORCE2_SAFE_DISTANCE 50
+
+/* Delay in ms between FSB changes */
+/* #define NFORCE2_DELAY 10 */
+
+/*
+ * nforce2_chipset:
+ * FSB is changed using the chipset
+ */
+static struct pci_dev *nforce2_dev;
+
+/* fid:
+ * multiplier * 10
+ */
+static int fid;
+
+/* min_fsb, max_fsb:
+ * minimum and maximum FSB (= FSB at boot time)
+ */
+static int min_fsb;
+static int max_fsb;
+
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
+MODULE_LICENSE("GPL");
+
+module_param(fid, int, 0444);
+module_param(min_fsb, int, 0444);
+
+MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
+MODULE_PARM_DESC(min_fsb,
+		"Minimum FSB to use, if not defined: current FSB - 50");
+
+/**
+ * nforce2_calc_fsb - calculate FSB
+ * @pll: PLL value
+ *
+ *   Calculates FSB from PLL value
+ */
+static int nforce2_calc_fsb(int pll)
+{
+	unsigned char mul, div;
+
+	mul = (pll >> 8) & 0xff;
+	div = pll & 0xff;
+
+	if (div > 0)
+		return NFORCE2_XTAL * mul / div;
+
+	return 0;
+}
+
+/**
+ * nforce2_calc_pll - calculate PLL value
+ * @fsb: FSB
+ *
+ *   Calculate PLL value for given FSB
+ */
+static int nforce2_calc_pll(unsigned int fsb)
+{
+	unsigned char xmul, xdiv;
+	unsigned char mul = 0, div = 0;
+	int tried = 0;
+
+	/* Try to calculate multiplier and divider up to 4 times */
+	while (((mul == 0) || (div == 0)) && (tried <= 3)) {
+		for (xdiv = 2; xdiv <= 0x80; xdiv++)
+			for (xmul = 1; xmul <= 0xfe; xmul++)
+				if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
+				    fsb + tried) {
+					mul = xmul;
+					div = xdiv;
+				}
+		tried++;
+	}
+
+	if ((mul == 0) || (div == 0))
+		return -1;
+
+	return NFORCE2_PLL(mul, div);
+}
+
+/**
+ * nforce2_write_pll - write PLL value to chipset
+ * @pll: PLL value
+ *
+ *   Writes new FSB PLL value to chipset
+ */
+static void nforce2_write_pll(int pll)
+{
+	int temp;
+
+	/* Set the pll addr. to 0x00 */
+	pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
+
+	/* Now write the value in all 64 registers */
+	for (temp = 0; temp <= 0x3f; temp++)
+		pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
+
+	return;
+}
+
+/**
+ * nforce2_fsb_read - Read FSB
+ *
+ *   Read FSB from chipset
+ *   If bootfsb != 0, return FSB at boot-time
+ */
+static unsigned int nforce2_fsb_read(int bootfsb)
+{
+	struct pci_dev *nforce2_sub5;
+	u32 fsb, temp = 0;
+
+	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
+	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
+				PCI_ANY_ID, PCI_ANY_ID, NULL);
+	if (!nforce2_sub5)
+		return 0;
+
+	pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
+	fsb /= 1000000;
+
+	/* Check if PLL register is already set */
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+
+	if (bootfsb || !temp)
+		return fsb;
+
+	/* Use PLL register FSB value */
+	pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
+	fsb = nforce2_calc_fsb(temp);
+
+	return fsb;
+}
+
+/**
+ * nforce2_set_fsb - set new FSB
+ * @fsb: New FSB
+ *
+ *   Sets new FSB
+ */
+static int nforce2_set_fsb(unsigned int fsb)
+{
+	u32 temp = 0;
+	unsigned int tfsb;
+	int diff;
+	int pll = 0;
+
+	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
+		pr_err("FSB %d is out of range!\n", fsb);
+		return -EINVAL;
+	}
+
+	tfsb = nforce2_fsb_read(0);
+	if (!tfsb) {
+		pr_err("Error while reading the FSB\n");
+		return -EINVAL;
+	}
+
+	/* First write? Then set actual value */
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	if (!temp) {
+		pll = nforce2_calc_pll(tfsb);
+
+		if (pll < 0)
+			return -EINVAL;
+
+		nforce2_write_pll(pll);
+	}
+
+	/* Enable write access */
+	temp = 0x01;
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
+
+	diff = tfsb - fsb;
+
+	if (!diff)
+		return 0;
+
+	while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
+		if (diff < 0)
+			tfsb++;
+		else
+			tfsb--;
+
+		/* Calculate the PLL reg. value */
+		pll = nforce2_calc_pll(tfsb);
+		if (pll == -1)
+			return -EINVAL;
+
+		nforce2_write_pll(pll);
+#ifdef NFORCE2_DELAY
+		mdelay(NFORCE2_DELAY);
+#endif
+	}
+
+	temp = 0x40;
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
+
+	return 0;
+}
+
+/**
+ * nforce2_get - get the CPU frequency
+ * @cpu: CPU number
+ *
+ * Returns the CPU frequency
+ */
+static unsigned int nforce2_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return nforce2_fsb_read(0) * fid * 100;
+}
+
+/**
+ * nforce2_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int nforce2_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq, unsigned int relation)
+{
+/*        unsigned long         flags; */
+	struct cpufreq_freqs freqs;
+	unsigned int target_fsb;
+
+	if ((target_freq > policy->max) || (target_freq < policy->min))
+		return -EINVAL;
+
+	target_fsb = target_freq / (fid * 100);
+
+	freqs.old = nforce2_get(policy->cpu);
+	freqs.new = target_fsb * fid * 100;
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
+	       freqs.old, freqs.new);
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+
+	/* Disable IRQs */
+	/* local_irq_save(flags); */
+
+	if (nforce2_set_fsb(target_fsb) < 0)
+		pr_err("Changing FSB to %d failed\n", target_fsb);
+	else
+		pr_debug("Changed FSB successfully to %d\n",
+			target_fsb);
+
+	/* Enable IRQs */
+	/* local_irq_restore(flags); */
+
+	cpufreq_freq_transition_end(policy, &freqs, 0);
+
+	return 0;
+}
+
+/**
+ * nforce2_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ */
+static int nforce2_verify(struct cpufreq_policy *policy)
+{
+	unsigned int fsb_pol_max;
+
+	fsb_pol_max = policy->max / (fid * 100);
+
+	if (policy->min < (fsb_pol_max * fid * 100))
+		policy->max = (fsb_pol_max + 1) * fid * 100;
+
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static int nforce2_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int fsb;
+	unsigned int rfid;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Get current FSB */
+	fsb = nforce2_fsb_read(0);
+
+	if (!fsb)
+		return -EIO;
+
+	/* FIX: Get FID from CPU */
+	if (!fid) {
+		if (!cpu_khz) {
+			pr_warn("cpu_khz not set, can't calculate multiplier!\n");
+			return -ENODEV;
+		}
+
+		fid = cpu_khz / (fsb * 100);
+		rfid = fid % 5;
+
+		if (rfid) {
+			if (rfid > 2)
+				fid += 5 - rfid;
+			else
+				fid -= rfid;
+		}
+	}
+
+	pr_info("FSB currently at %i MHz, FID %d.%d\n",
+		fsb, fid / 10, fid % 10);
+
+	/* Set maximum FSB to FSB at boot time */
+	max_fsb = nforce2_fsb_read(1);
+
+	if (!max_fsb)
+		return -EIO;
+
+	if (!min_fsb)
+		min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
+
+	if (min_fsb < NFORCE2_MIN_FSB)
+		min_fsb = NFORCE2_MIN_FSB;
+
+	/* cpuinfo and default policy values */
+	policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100;
+	policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100;
+
+	return 0;
+}
+
+static int nforce2_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver nforce2_driver = {
+	.name = "nforce2",
+	.flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify = nforce2_verify,
+	.target = nforce2_target,
+	.get = nforce2_get,
+	.init = nforce2_cpu_init,
+	.exit = nforce2_cpu_exit,
+};
+
+#ifdef MODULE
+static const struct pci_device_id nforce2_ids[] = {
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, nforce2_ids);
+#endif
+
+/**
+ * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
+ *
+ * Detects nForce2 A2 and C1 stepping
+ *
+ */
+static int nforce2_detect_chipset(void)
+{
+	nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+					PCI_DEVICE_ID_NVIDIA_NFORCE2,
+					PCI_ANY_ID, PCI_ANY_ID, NULL);
+
+	if (nforce2_dev == NULL)
+		return -ENODEV;
+
+	pr_info("Detected nForce2 chipset revision %X\n",
+		nforce2_dev->revision);
+	pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n");
+
+	return 0;
+}
+
+/**
+ * nforce2_init - initializes the nForce2 CPUFreq driver
+ *
+ * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initialization, and zero on
+ * success.
+ */
+static int __init nforce2_init(void)
+{
+	/* TODO: do we need to detect the processor? */
+
+	/* detect chipset */
+	if (nforce2_detect_chipset()) {
+		pr_info("No nForce2 chipset\n");
+		return -ENODEV;
+	}
+
+	return cpufreq_register_driver(&nforce2_driver);
+}
+
+/**
+ * nforce2_exit - unregisters cpufreq module
+ *
+ *   Unregisters nForce2 FSB change support.
+ */
+static void __exit nforce2_exit(void)
+{
+	cpufreq_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq.c
new file mode 100644
index 0000000..b37808c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq.c
@@ -0,0 +1,2627 @@
+/*
+ *  linux/drivers/cpufreq/cpufreq.c
+ *
+ *  Copyright (C) 2001 Russell King
+ *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *            (C) 2013 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ *  Oct 2005 - Ashok Raj <ashok.raj@intel.com>
+ *	Added handling for CPU hotplug
+ *  Feb 2006 - Jacob Shin <jacob.shin@amd.com>
+ *	Fix handling for CPU hotplug -- affected CPUs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpufreq_times.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/tick.h>
+#include <trace/events/power.h>
+
+static LIST_HEAD(cpufreq_policy_list);
+
+static inline bool policy_is_inactive(struct cpufreq_policy *policy)
+{
+	return cpumask_empty(policy->cpus);
+}
+
+/* Macros to iterate over CPU policies */
+#define for_each_suitable_policy(__policy, __active)			 \
+	list_for_each_entry(__policy, &cpufreq_policy_list, policy_list) \
+		if ((__active) == !policy_is_inactive(__policy))
+
+#define for_each_active_policy(__policy)		\
+	for_each_suitable_policy(__policy, true)
+#define for_each_inactive_policy(__policy)		\
+	for_each_suitable_policy(__policy, false)
+
+#define for_each_policy(__policy)			\
+	list_for_each_entry(__policy, &cpufreq_policy_list, policy_list)
+
+/* Iterate over governors */
+static LIST_HEAD(cpufreq_governor_list);
+#define for_each_governor(__governor)				\
+	list_for_each_entry(__governor, &cpufreq_governor_list, governor_list)
+
+/**
+ * The "cpufreq driver" - the arch- or hardware-dependent low
+ * level driver of CPUFreq support, and its spinlock. This lock
+ * also protects the cpufreq_cpu_data array.
+ */
+static struct cpufreq_driver *cpufreq_driver;
+static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
+static DEFINE_RWLOCK(cpufreq_driver_lock);
+
+/* Flag to suspend/resume CPUFreq governors */
+static bool cpufreq_suspended;
+
+static inline bool has_target(void)
+{
+	return cpufreq_driver->target_index || cpufreq_driver->target;
+}
+
+/* internal prototypes */
+static unsigned int __cpufreq_get(struct cpufreq_policy *policy);
+static int cpufreq_init_governor(struct cpufreq_policy *policy);
+static void cpufreq_exit_governor(struct cpufreq_policy *policy);
+static int cpufreq_start_governor(struct cpufreq_policy *policy);
+static void cpufreq_stop_governor(struct cpufreq_policy *policy);
+static void cpufreq_governor_limits(struct cpufreq_policy *policy);
+
+/**
+ * Two notifier lists: the "policy" list is involved in the
+ * validation process for a new CPU frequency policy; the
+ * "transition" list for kernel code that needs to handle
+ * changes to devices when the CPU clock speed changes.
+ * The mutex locks both lists.
+ */
+static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list);
+static struct srcu_notifier_head cpufreq_transition_notifier_list;
+
+static bool init_cpufreq_transition_notifier_list_called;
+static int __init init_cpufreq_transition_notifier_list(void)
+{
+	srcu_init_notifier_head(&cpufreq_transition_notifier_list);
+	init_cpufreq_transition_notifier_list_called = true;
+	return 0;
+}
+pure_initcall(init_cpufreq_transition_notifier_list);
+
+static int off __read_mostly;
+static int cpufreq_disabled(void)
+{
+	return off;
+}
+void disable_cpufreq(void)
+{
+	off = 1;
+}
+static DEFINE_MUTEX(cpufreq_governor_mutex);
+
+bool have_governor_per_policy(void)
+{
+	return !!(cpufreq_driver->flags & CPUFREQ_HAVE_GOVERNOR_PER_POLICY);
+}
+EXPORT_SYMBOL_GPL(have_governor_per_policy);
+
+struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy)
+{
+	if (have_governor_per_policy())
+		return &policy->kobj;
+	else
+		return cpufreq_global_kobject;
+}
+EXPORT_SYMBOL_GPL(get_governor_parent_kobj);
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time;
+	u64 cur_wall_time;
+	u64 busy_time;
+
+	cur_wall_time = jiffies64_to_nsecs(get_jiffies_64());
+
+	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+	idle_time = cur_wall_time - busy_time;
+	if (wall)
+		*wall = div_u64(cur_wall_time, NSEC_PER_USEC);
+
+	return div_u64(idle_time, NSEC_PER_USEC);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy)
+{
+	u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL);
+
+	if (idle_time == -1ULL)
+		return get_cpu_idle_time_jiffy(cpu, wall);
+	else if (!io_busy)
+		idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+	return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
+
+/*
+ * This is a generic cpufreq init() routine which can be used by cpufreq
+ * drivers of SMP systems. It will do following:
+ * - validate & show freq table passed
+ * - set policies transition latency
+ * - policy->cpus with all possible CPUs
+ */
+int cpufreq_generic_init(struct cpufreq_policy *policy,
+		struct cpufreq_frequency_table *table,
+		unsigned int transition_latency)
+{
+	int ret;
+
+	ret = cpufreq_table_validate_and_show(policy, table);
+	if (ret) {
+		pr_err("%s: invalid frequency table: %d\n", __func__, ret);
+		return ret;
+	}
+
+	policy->cpuinfo.transition_latency = transition_latency;
+
+	/*
+	 * The driver only supports the SMP configuration where all processors
+	 * share the clock and voltage and clock.
+	 */
+	cpumask_setall(policy->cpus);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_generic_init);
+
+struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+
+	return policy && cpumask_test_cpu(cpu, policy->cpus) ? policy : NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_cpu_get_raw);
+
+unsigned int cpufreq_generic_get(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
+
+	if (!policy || IS_ERR(policy->clk)) {
+		pr_err("%s: No %s associated to cpu: %d\n",
+		       __func__, policy ? "clk" : "policy", cpu);
+		return 0;
+	}
+
+	return clk_get_rate(policy->clk) / 1000;
+}
+EXPORT_SYMBOL_GPL(cpufreq_generic_get);
+
+/**
+ * cpufreq_cpu_get: returns policy for a cpu and marks it busy.
+ *
+ * @cpu: cpu to find policy for.
+ *
+ * This returns policy for 'cpu', returns NULL if it doesn't exist.
+ * It also increments the kobject reference count to mark it busy and so would
+ * require a corresponding call to cpufreq_cpu_put() to decrement it back.
+ * If corresponding call cpufreq_cpu_put() isn't made, the policy wouldn't be
+ * freed as that depends on the kobj count.
+ *
+ * Return: A valid policy on success, otherwise NULL on failure.
+ */
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = NULL;
+	unsigned long flags;
+
+	if (WARN_ON(cpu >= nr_cpu_ids))
+		return NULL;
+
+	/* get the cpufreq driver */
+	read_lock_irqsave(&cpufreq_driver_lock, flags);
+
+	if (cpufreq_driver) {
+		/* get the CPU */
+		policy = cpufreq_cpu_get_raw(cpu);
+		if (policy)
+			kobject_get(&policy->kobj);
+	}
+
+	read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	return policy;
+}
+EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
+
+/**
+ * cpufreq_cpu_put: Decrements the usage count of a policy
+ *
+ * @policy: policy earlier returned by cpufreq_cpu_get().
+ *
+ * This decrements the kobject reference count incremented earlier by calling
+ * cpufreq_cpu_get().
+ */
+void cpufreq_cpu_put(struct cpufreq_policy *policy)
+{
+	kobject_put(&policy->kobj);
+}
+EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
+
+/*********************************************************************
+ *            EXTERNALLY AFFECTING FREQUENCY CHANGES                 *
+ *********************************************************************/
+
+/**
+ * adjust_jiffies - adjust the system "loops_per_jiffy"
+ *
+ * This function alters the system "loops_per_jiffy" for the clock
+ * speed change. Note that loops_per_jiffy cannot be updated on SMP
+ * systems as each CPU might be scaled differently. So, use the arch
+ * per-CPU loops_per_jiffy value wherever possible.
+ */
+static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
+{
+#ifndef CONFIG_SMP
+	static unsigned long l_p_j_ref;
+	static unsigned int l_p_j_ref_freq;
+
+	if (ci->flags & CPUFREQ_CONST_LOOPS)
+		return;
+
+	if (!l_p_j_ref_freq) {
+		l_p_j_ref = loops_per_jiffy;
+		l_p_j_ref_freq = ci->old;
+		pr_debug("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n",
+			 l_p_j_ref, l_p_j_ref_freq);
+	}
+	if (val == CPUFREQ_POSTCHANGE && ci->old != ci->new) {
+		loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
+								ci->new);
+		pr_debug("scaling loops_per_jiffy to %lu for frequency %u kHz\n",
+			 loops_per_jiffy, ci->new);
+	}
+#endif
+}
+
+static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs, unsigned int state)
+{
+	BUG_ON(irqs_disabled());
+
+	if (cpufreq_disabled())
+		return;
+
+	freqs->flags = cpufreq_driver->flags;
+	pr_debug("notification %u of frequency transition to %u kHz\n",
+		 state, freqs->new);
+
+	switch (state) {
+
+	case CPUFREQ_PRECHANGE:
+		/* detect if the driver reported a value as "old frequency"
+		 * which is not equal to what the cpufreq core thinks is
+		 * "old frequency".
+		 */
+		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+			if ((policy) && (policy->cpu == freqs->cpu) &&
+			    (policy->cur) && (policy->cur != freqs->old)) {
+				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+					 freqs->old, policy->cur);
+				freqs->old = policy->cur;
+			}
+		}
+		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+				CPUFREQ_PRECHANGE, freqs);
+		adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
+		break;
+
+	case CPUFREQ_POSTCHANGE:
+		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
+		pr_debug("FREQ: %lu - CPU: %lu\n",
+			 (unsigned long)freqs->new, (unsigned long)freqs->cpu);
+		trace_cpu_frequency(freqs->new, freqs->cpu);
+		cpufreq_stats_record_transition(policy, freqs->new);
+		cpufreq_times_record_transition(freqs);
+		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+				CPUFREQ_POSTCHANGE, freqs);
+		if (likely(policy) && likely(policy->cpu == freqs->cpu))
+			policy->cur = freqs->new;
+		break;
+	}
+}
+
+/**
+ * cpufreq_notify_transition - call notifier chain and adjust_jiffies
+ * on frequency transition.
+ *
+ * This function calls the transition notifiers and the "adjust_jiffies"
+ * function. It is called twice on all CPU frequency changes that have
+ * external effects.
+ */
+static void cpufreq_notify_transition(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs, unsigned int state)
+{
+	for_each_cpu(freqs->cpu, policy->cpus)
+		__cpufreq_notify_transition(policy, freqs, state);
+}
+
+/* Do post notifications when there are chances that transition has failed */
+static void cpufreq_notify_post_transition(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs, int transition_failed)
+{
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE);
+	if (!transition_failed)
+		return;
+
+	swap(freqs->old, freqs->new);
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE);
+}
+
+void cpufreq_freq_transition_begin(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs)
+{
+
+	/*
+	 * Catch double invocations of _begin() which lead to self-deadlock.
+	 * ASYNC_NOTIFICATION drivers are left out because the cpufreq core
+	 * doesn't invoke _begin() on their behalf, and hence the chances of
+	 * double invocations are very low. Moreover, there are scenarios
+	 * where these checks can emit false-positive warnings in these
+	 * drivers; so we avoid that by skipping them altogether.
+	 */
+	WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION)
+				&& current == policy->transition_task);
+
+wait:
+	wait_event(policy->transition_wait, !policy->transition_ongoing);
+
+	spin_lock(&policy->transition_lock);
+
+	if (unlikely(policy->transition_ongoing)) {
+		spin_unlock(&policy->transition_lock);
+		goto wait;
+	}
+
+	policy->transition_ongoing = true;
+	policy->transition_task = current;
+
+	spin_unlock(&policy->transition_lock);
+
+	cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE);
+}
+EXPORT_SYMBOL_GPL(cpufreq_freq_transition_begin);
+
+void cpufreq_freq_transition_end(struct cpufreq_policy *policy,
+		struct cpufreq_freqs *freqs, int transition_failed)
+{
+	if (unlikely(WARN_ON(!policy->transition_ongoing)))
+		return;
+
+	cpufreq_notify_post_transition(policy, freqs, transition_failed);
+
+	policy->transition_ongoing = false;
+	policy->transition_task = NULL;
+
+	wake_up(&policy->transition_wait);
+}
+EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end);
+
+/*
+ * Fast frequency switching status count.  Positive means "enabled", negative
+ * means "disabled" and 0 means "not decided yet".
+ */
+static int cpufreq_fast_switch_count;
+static DEFINE_MUTEX(cpufreq_fast_switch_lock);
+
+static void cpufreq_list_transition_notifiers(void)
+{
+	struct notifier_block *nb;
+
+	pr_info("Registered transition notifiers:\n");
+
+	mutex_lock(&cpufreq_transition_notifier_list.mutex);
+
+	for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next)
+		pr_info("%pF\n", nb->notifier_call);
+
+	mutex_unlock(&cpufreq_transition_notifier_list.mutex);
+}
+
+/**
+ * cpufreq_enable_fast_switch - Enable fast frequency switching for policy.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ *
+ * Try to enable fast frequency switching for @policy.
+ *
+ * The attempt will fail if there is at least one transition notifier registered
+ * at this point, as fast frequency switching is quite fundamentally at odds
+ * with transition notifiers.  Thus if successful, it will make registration of
+ * transition notifiers fail going forward.
+ */
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy)
+{
+	lockdep_assert_held(&policy->rwsem);
+
+	if (!policy->fast_switch_possible)
+		return;
+
+	mutex_lock(&cpufreq_fast_switch_lock);
+	if (cpufreq_fast_switch_count >= 0) {
+		cpufreq_fast_switch_count++;
+		policy->fast_switch_enabled = true;
+	} else {
+		pr_warn("CPU%u: Fast frequency switching not enabled\n",
+			policy->cpu);
+		cpufreq_list_transition_notifiers();
+	}
+	mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch);
+
+/**
+ * cpufreq_disable_fast_switch - Disable fast frequency switching for policy.
+ * @policy: cpufreq policy to disable fast frequency switching for.
+ */
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy)
+{
+	mutex_lock(&cpufreq_fast_switch_lock);
+	if (policy->fast_switch_enabled) {
+		policy->fast_switch_enabled = false;
+		if (!WARN_ON(cpufreq_fast_switch_count <= 0))
+			cpufreq_fast_switch_count--;
+	}
+	mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
+
+/**
+ * cpufreq_driver_resolve_freq - Map a target frequency to a driver-supported
+ * one.
+ * @target_freq: target frequency to resolve.
+ *
+ * The target to driver frequency mapping is cached in the policy.
+ *
+ * Return: Lowest driver-supported frequency greater than or equal to the
+ * given target_freq, subject to policy (min/max) and driver limitations.
+ */
+unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
+					 unsigned int target_freq)
+{
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
+	policy->cached_target_freq = target_freq;
+
+	if (cpufreq_driver->target_index) {
+		int idx;
+
+		idx = cpufreq_frequency_table_target(policy, target_freq,
+						     CPUFREQ_RELATION_L);
+		policy->cached_resolved_idx = idx;
+		return policy->freq_table[idx].frequency;
+	}
+
+	if (cpufreq_driver->resolve_freq)
+		return cpufreq_driver->resolve_freq(policy, target_freq);
+
+	return target_freq;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
+
+unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy)
+{
+	unsigned int latency;
+
+	if (policy->transition_delay_us)
+		return policy->transition_delay_us;
+
+	latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+	if (latency) {
+		/*
+		 * For platforms that can change the frequency very fast (< 10
+		 * us), the above formula gives a decent transition delay. But
+		 * for platforms where transition_latency is in milliseconds, it
+		 * ends up giving unrealistic values.
+		 *
+		 * Cap the default transition delay to 10 ms, which seems to be
+		 * a reasonable amount of time after which we should reevaluate
+		 * the frequency.
+		 */
+		return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000);
+	}
+
+	return LATENCY_MULTIPLIER;
+}
+EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us);
+
+/*********************************************************************
+ *                          SYSFS INTERFACE                          *
+ *********************************************************************/
+static ssize_t show_boost(struct kobject *kobj,
+			  struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled);
+}
+
+static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int ret, enable;
+
+	ret = sscanf(buf, "%d", &enable);
+	if (ret != 1 || enable < 0 || enable > 1)
+		return -EINVAL;
+
+	if (cpufreq_boost_trigger_state(enable)) {
+		pr_err("%s: Cannot %s BOOST!\n",
+		       __func__, enable ? "enable" : "disable");
+		return -EINVAL;
+	}
+
+	pr_debug("%s: cpufreq BOOST %s\n",
+		 __func__, enable ? "enabled" : "disabled");
+
+	return count;
+}
+define_one_global_rw(boost);
+
+static struct cpufreq_governor *find_governor(const char *str_governor)
+{
+	struct cpufreq_governor *t;
+
+	for_each_governor(t)
+		if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN))
+			return t;
+
+	return NULL;
+}
+
+/**
+ * cpufreq_parse_governor - parse a governor string
+ */
+static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
+				struct cpufreq_governor **governor)
+{
+	int err = -EINVAL;
+
+	if (cpufreq_driver->setpolicy) {
+		if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
+			*policy = CPUFREQ_POLICY_PERFORMANCE;
+			err = 0;
+		} else if (!strncasecmp(str_governor, "powersave",
+						CPUFREQ_NAME_LEN)) {
+			*policy = CPUFREQ_POLICY_POWERSAVE;
+			err = 0;
+		}
+	} else {
+		struct cpufreq_governor *t;
+
+		mutex_lock(&cpufreq_governor_mutex);
+
+		t = find_governor(str_governor);
+
+		if (t == NULL) {
+			int ret;
+
+			mutex_unlock(&cpufreq_governor_mutex);
+			ret = request_module("cpufreq_%s", str_governor);
+			mutex_lock(&cpufreq_governor_mutex);
+
+			if (ret == 0)
+				t = find_governor(str_governor);
+		}
+
+		if (t != NULL) {
+			*governor = t;
+			err = 0;
+		}
+
+		mutex_unlock(&cpufreq_governor_mutex);
+	}
+	return err;
+}
+
+/**
+ * cpufreq_per_cpu_attr_read() / show_##file_name() -
+ * print out cpufreq information
+ *
+ * Write out information from cpufreq_driver->policy[cpu]; object must be
+ * "unsigned int".
+ */
+
+#define show_one(file_name, object)			\
+static ssize_t show_##file_name				\
+(struct cpufreq_policy *policy, char *buf)		\
+{							\
+	return sprintf(buf, "%u\n", policy->object);	\
+}
+
+show_one(cpuinfo_min_freq, cpuinfo.min_freq);
+show_one(cpuinfo_max_freq, cpuinfo.max_freq);
+show_one(cpuinfo_transition_latency, cpuinfo.transition_latency);
+show_one(scaling_min_freq, min);
+show_one(scaling_max_freq, max);
+
+__weak unsigned int arch_freq_get_on_cpu(int cpu)
+{
+	return 0;
+}
+
+static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf)
+{
+	ssize_t ret;
+	unsigned int freq;
+
+	freq = arch_freq_get_on_cpu(policy->cpu);
+	if (freq)
+		ret = sprintf(buf, "%u\n", freq);
+	else if (cpufreq_driver && cpufreq_driver->setpolicy &&
+			cpufreq_driver->get)
+		ret = sprintf(buf, "%u\n", cpufreq_driver->get(policy->cpu));
+	else
+		ret = sprintf(buf, "%u\n", policy->cur);
+	return ret;
+}
+
+static int cpufreq_set_policy(struct cpufreq_policy *policy,
+				struct cpufreq_policy *new_policy);
+
+/**
+ * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
+ */
+#define store_one(file_name, object)			\
+static ssize_t store_##file_name					\
+(struct cpufreq_policy *policy, const char *buf, size_t count)		\
+{									\
+	int ret, temp;							\
+	struct cpufreq_policy new_policy;				\
+									\
+	memcpy(&new_policy, policy, sizeof(*policy));			\
+	new_policy.min = policy->user_policy.min;			\
+	new_policy.max = policy->user_policy.max;			\
+									\
+	ret = sscanf(buf, "%u", &new_policy.object);			\
+	if (ret != 1)							\
+		return -EINVAL;						\
+									\
+	temp = new_policy.object;					\
+	ret = cpufreq_set_policy(policy, &new_policy);		\
+	if (!ret)							\
+		policy->user_policy.object = temp;			\
+									\
+	return ret ? ret : count;					\
+}
+
+store_one(scaling_min_freq, min);
+store_one(scaling_max_freq, max);
+
+/**
+ * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
+ */
+static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy,
+					char *buf)
+{
+	unsigned int cur_freq = __cpufreq_get(policy);
+
+	if (cur_freq)
+		return sprintf(buf, "%u\n", cur_freq);
+
+	return sprintf(buf, "<unknown>\n");
+}
+
+/**
+ * show_scaling_governor - show the current policy for the specified CPU
+ */
+static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
+{
+	if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
+		return sprintf(buf, "powersave\n");
+	else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
+		return sprintf(buf, "performance\n");
+	else if (policy->governor)
+		return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n",
+				policy->governor->name);
+	return -EINVAL;
+}
+
+/**
+ * store_scaling_governor - store policy for the specified CPU
+ */
+static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
+					const char *buf, size_t count)
+{
+	int ret;
+	char	str_governor[16];
+	struct cpufreq_policy new_policy;
+
+	memcpy(&new_policy, policy, sizeof(*policy));
+
+	ret = sscanf(buf, "%15s", str_governor);
+	if (ret != 1)
+		return -EINVAL;
+
+	if (cpufreq_parse_governor(str_governor, &new_policy.policy,
+						&new_policy.governor))
+		return -EINVAL;
+
+	ret = cpufreq_set_policy(policy, &new_policy);
+	return ret ? ret : count;
+}
+
+/**
+ * show_scaling_driver - show the cpufreq driver currently loaded
+ */
+static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
+{
+	return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name);
+}
+
+/**
+ * show_scaling_available_governors - show the available CPUfreq governors
+ */
+static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy,
+						char *buf)
+{
+	ssize_t i = 0;
+	struct cpufreq_governor *t;
+
+	if (!has_target()) {
+		i += sprintf(buf, "performance powersave");
+		goto out;
+	}
+
+	for_each_governor(t) {
+		if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
+		    - (CPUFREQ_NAME_LEN + 2)))
+			goto out;
+		i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name);
+	}
+out:
+	i += sprintf(&buf[i], "\n");
+	return i;
+}
+
+ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf)
+{
+	ssize_t i = 0;
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask) {
+		if (i)
+			i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " ");
+		i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu);
+		if (i >= (PAGE_SIZE - 5))
+			break;
+	}
+	i += sprintf(&buf[i], "\n");
+	return i;
+}
+EXPORT_SYMBOL_GPL(cpufreq_show_cpus);
+
+/**
+ * show_related_cpus - show the CPUs affected by each transition even if
+ * hw coordination is in use
+ */
+static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf)
+{
+	return cpufreq_show_cpus(policy->related_cpus, buf);
+}
+
+/**
+ * show_affected_cpus - show the CPUs affected by each transition
+ */
+static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf)
+{
+	return cpufreq_show_cpus(policy->cpus, buf);
+}
+
+static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy,
+					const char *buf, size_t count)
+{
+	unsigned int freq = 0;
+	unsigned int ret;
+
+	if (!policy->governor || !policy->governor->store_setspeed)
+		return -EINVAL;
+
+	ret = sscanf(buf, "%u", &freq);
+	if (ret != 1)
+		return -EINVAL;
+
+	policy->governor->store_setspeed(policy, freq);
+
+	return count;
+}
+
+static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
+{
+	if (!policy->governor || !policy->governor->show_setspeed)
+		return sprintf(buf, "<unsupported>\n");
+
+	return policy->governor->show_setspeed(policy, buf);
+}
+
+/**
+ * show_bios_limit - show the current cpufreq HW/BIOS limitation
+ */
+static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
+{
+	unsigned int limit;
+	int ret;
+	if (cpufreq_driver->bios_limit) {
+		ret = cpufreq_driver->bios_limit(policy->cpu, &limit);
+		if (!ret)
+			return sprintf(buf, "%u\n", limit);
+	}
+	return sprintf(buf, "%u\n", policy->cpuinfo.max_freq);
+}
+
+cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400);
+cpufreq_freq_attr_ro(cpuinfo_min_freq);
+cpufreq_freq_attr_ro(cpuinfo_max_freq);
+cpufreq_freq_attr_ro(cpuinfo_transition_latency);
+cpufreq_freq_attr_ro(scaling_available_governors);
+cpufreq_freq_attr_ro(scaling_driver);
+cpufreq_freq_attr_ro(scaling_cur_freq);
+cpufreq_freq_attr_ro(bios_limit);
+cpufreq_freq_attr_ro(related_cpus);
+cpufreq_freq_attr_ro(affected_cpus);
+cpufreq_freq_attr_rw(scaling_min_freq);
+cpufreq_freq_attr_rw(scaling_max_freq);
+cpufreq_freq_attr_rw(scaling_governor);
+cpufreq_freq_attr_rw(scaling_setspeed);
+
+static struct attribute *default_attrs[] = {
+	&cpuinfo_min_freq.attr,
+	&cpuinfo_max_freq.attr,
+	&cpuinfo_transition_latency.attr,
+	&scaling_min_freq.attr,
+	&scaling_max_freq.attr,
+	&affected_cpus.attr,
+	&related_cpus.attr,
+	&scaling_governor.attr,
+	&scaling_driver.attr,
+	&scaling_available_governors.attr,
+	&scaling_setspeed.attr,
+	NULL
+};
+
+#define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
+#define to_attr(a) container_of(a, struct freq_attr, attr)
+
+static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+	struct cpufreq_policy *policy = to_policy(kobj);
+	struct freq_attr *fattr = to_attr(attr);
+	ssize_t ret;
+
+	if (!fattr->show)
+		return -EIO;
+
+	down_read(&policy->rwsem);
+	ret = fattr->show(policy, buf);
+	up_read(&policy->rwsem);
+
+	return ret;
+}
+
+static ssize_t store(struct kobject *kobj, struct attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct cpufreq_policy *policy = to_policy(kobj);
+	struct freq_attr *fattr = to_attr(attr);
+	ssize_t ret = -EINVAL;
+
+	if (!fattr->store)
+		return -EIO;
+
+	cpus_read_lock();
+
+	if (cpu_online(policy->cpu)) {
+		down_write(&policy->rwsem);
+		ret = fattr->store(policy, buf, count);
+		up_write(&policy->rwsem);
+	}
+
+	cpus_read_unlock();
+
+	return ret;
+}
+
+static void cpufreq_sysfs_release(struct kobject *kobj)
+{
+	struct cpufreq_policy *policy = to_policy(kobj);
+	pr_debug("last reference is dropped\n");
+	complete(&policy->kobj_unregister);
+}
+
+static const struct sysfs_ops sysfs_ops = {
+	.show	= show,
+	.store	= store,
+};
+
+static struct kobj_type ktype_cpufreq = {
+	.sysfs_ops	= &sysfs_ops,
+	.default_attrs	= default_attrs,
+	.release	= cpufreq_sysfs_release,
+};
+
+static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu)
+{
+	struct device *dev = get_cpu_device(cpu);
+
+	if (!dev)
+		return;
+
+	if (cpumask_test_and_set_cpu(cpu, policy->real_cpus))
+		return;
+
+	dev_dbg(dev, "%s: Adding symlink\n", __func__);
+	if (sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq"))
+		dev_err(dev, "cpufreq symlink creation failed\n");
+}
+
+static void remove_cpu_dev_symlink(struct cpufreq_policy *policy,
+				   struct device *dev)
+{
+	dev_dbg(dev, "%s: Removing symlink\n", __func__);
+	sysfs_remove_link(&dev->kobj, "cpufreq");
+}
+
+static int cpufreq_add_dev_interface(struct cpufreq_policy *policy)
+{
+	struct freq_attr **drv_attr;
+	int ret = 0;
+
+	/* set up files for this cpu device */
+	drv_attr = cpufreq_driver->attr;
+	while (drv_attr && *drv_attr) {
+		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
+		if (ret)
+			return ret;
+		drv_attr++;
+	}
+	if (cpufreq_driver->get) {
+		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+		if (ret)
+			return ret;
+	}
+
+	ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+	if (ret)
+		return ret;
+
+	if (cpufreq_driver->bios_limit) {
+		ret = sysfs_create_file(&policy->kobj, &bios_limit.attr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+__weak struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return NULL;
+}
+
+static int cpufreq_init_policy(struct cpufreq_policy *policy)
+{
+	struct cpufreq_governor *gov = NULL;
+	struct cpufreq_policy new_policy;
+
+	memcpy(&new_policy, policy, sizeof(*policy));
+
+	/* Update governor of new_policy to the governor used before hotplug */
+	gov = find_governor(policy->last_governor);
+	if (gov) {
+		pr_debug("Restoring governor %s for cpu %d\n",
+				policy->governor->name, policy->cpu);
+	} else {
+		gov = cpufreq_default_governor();
+		if (!gov)
+			return -ENODATA;
+	}
+
+	new_policy.governor = gov;
+
+	/* Use the default policy if there is no last_policy. */
+	if (cpufreq_driver->setpolicy) {
+		if (policy->last_policy)
+			new_policy.policy = policy->last_policy;
+		else
+			cpufreq_parse_governor(gov->name, &new_policy.policy,
+					       NULL);
+	}
+	/* set default policy */
+	return cpufreq_set_policy(policy, &new_policy);
+}
+
+static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu)
+{
+	int ret = 0;
+
+	/* Has this CPU been taken care of already? */
+	if (cpumask_test_cpu(cpu, policy->cpus))
+		return 0;
+
+	down_write(&policy->rwsem);
+	if (has_target())
+		cpufreq_stop_governor(policy);
+
+	cpumask_set_cpu(cpu, policy->cpus);
+
+	if (has_target()) {
+		ret = cpufreq_start_governor(policy);
+		if (ret)
+			pr_err("%s: Failed to start governor\n", __func__);
+	}
+	up_write(&policy->rwsem);
+	return ret;
+}
+
+static void handle_update(struct work_struct *work)
+{
+	struct cpufreq_policy *policy =
+		container_of(work, struct cpufreq_policy, update);
+	unsigned int cpu = policy->cpu;
+	pr_debug("handle_update for cpu %u called\n", cpu);
+	cpufreq_update_policy(cpu);
+}
+
+static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+	int ret;
+
+	policy = kzalloc(sizeof(*policy), GFP_KERNEL);
+	if (!policy)
+		return NULL;
+
+	if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL))
+		goto err_free_policy;
+
+	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL))
+		goto err_free_cpumask;
+
+	if (!zalloc_cpumask_var(&policy->real_cpus, GFP_KERNEL))
+		goto err_free_rcpumask;
+
+	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
+				   cpufreq_global_kobject, "policy%u", cpu);
+	if (ret) {
+		pr_err("%s: failed to init policy->kobj: %d\n", __func__, ret);
+		kobject_put(&policy->kobj);
+		goto err_free_real_cpus;
+	}
+
+	INIT_LIST_HEAD(&policy->policy_list);
+	init_rwsem(&policy->rwsem);
+	spin_lock_init(&policy->transition_lock);
+	init_waitqueue_head(&policy->transition_wait);
+	init_completion(&policy->kobj_unregister);
+	INIT_WORK(&policy->update, handle_update);
+
+	policy->cpu = cpu;
+	return policy;
+
+err_free_real_cpus:
+	free_cpumask_var(policy->real_cpus);
+err_free_rcpumask:
+	free_cpumask_var(policy->related_cpus);
+err_free_cpumask:
+	free_cpumask_var(policy->cpus);
+err_free_policy:
+	kfree(policy);
+
+	return NULL;
+}
+
+static void cpufreq_policy_put_kobj(struct cpufreq_policy *policy)
+{
+	struct kobject *kobj;
+	struct completion *cmp;
+
+	down_write(&policy->rwsem);
+	cpufreq_stats_free_table(policy);
+	kobj = &policy->kobj;
+	cmp = &policy->kobj_unregister;
+	up_write(&policy->rwsem);
+	kobject_put(kobj);
+
+	/*
+	 * We need to make sure that the underlying kobj is
+	 * actually not referenced anymore by anybody before we
+	 * proceed with unloading.
+	 */
+	pr_debug("waiting for dropping of refcount\n");
+	wait_for_completion(cmp);
+	pr_debug("wait complete\n");
+}
+
+static void cpufreq_policy_free(struct cpufreq_policy *policy)
+{
+	unsigned long flags;
+	int cpu;
+
+	/* Remove policy from list */
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+	list_del(&policy->policy_list);
+
+	for_each_cpu(cpu, policy->related_cpus)
+		per_cpu(cpufreq_cpu_data, cpu) = NULL;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	cpufreq_policy_put_kobj(policy);
+	free_cpumask_var(policy->real_cpus);
+	free_cpumask_var(policy->related_cpus);
+	free_cpumask_var(policy->cpus);
+	kfree(policy);
+}
+
+static int cpufreq_online(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+	bool new_policy;
+	unsigned long flags;
+	unsigned int j;
+	int ret;
+
+	pr_debug("%s: bringing CPU%u online\n", __func__, cpu);
+
+	/* Check if this CPU already has a policy to manage it */
+	policy = per_cpu(cpufreq_cpu_data, cpu);
+	if (policy) {
+		WARN_ON(!cpumask_test_cpu(cpu, policy->related_cpus));
+		if (!policy_is_inactive(policy))
+			return cpufreq_add_policy_cpu(policy, cpu);
+
+		/* This is the only online CPU for the policy.  Start over. */
+		new_policy = false;
+		down_write(&policy->rwsem);
+		policy->cpu = cpu;
+		policy->governor = NULL;
+		up_write(&policy->rwsem);
+	} else {
+		new_policy = true;
+		policy = cpufreq_policy_alloc(cpu);
+		if (!policy)
+			return -ENOMEM;
+	}
+
+	cpumask_copy(policy->cpus, cpumask_of(cpu));
+
+	/* call driver. From then on the cpufreq must be able
+	 * to accept all calls to ->verify and ->setpolicy for this CPU
+	 */
+	ret = cpufreq_driver->init(policy);
+	if (ret) {
+		pr_debug("initialization failed\n");
+		goto out_free_policy;
+	}
+
+	down_write(&policy->rwsem);
+
+	if (new_policy) {
+		/* related_cpus should at least include policy->cpus. */
+		cpumask_copy(policy->related_cpus, policy->cpus);
+	}
+
+	/*
+	 * affected cpus must always be the one, which are online. We aren't
+	 * managing offline cpus here.
+	 */
+	cpumask_and(policy->cpus, policy->cpus, cpu_online_mask);
+
+	if (new_policy) {
+		policy->user_policy.min = policy->min;
+		policy->user_policy.max = policy->max;
+
+		for_each_cpu(j, policy->related_cpus) {
+			per_cpu(cpufreq_cpu_data, j) = policy;
+			add_cpu_dev_symlink(policy, j);
+		}
+	} else {
+		policy->min = policy->user_policy.min;
+		policy->max = policy->user_policy.max;
+	}
+
+	if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
+		policy->cur = cpufreq_driver->get(policy->cpu);
+		if (!policy->cur) {
+			pr_err("%s: ->get() failed\n", __func__);
+			goto out_exit_policy;
+		}
+	}
+
+	/*
+	 * Sometimes boot loaders set CPU frequency to a value outside of
+	 * frequency table present with cpufreq core. In such cases CPU might be
+	 * unstable if it has to run on that frequency for long duration of time
+	 * and so its better to set it to a frequency which is specified in
+	 * freq-table. This also makes cpufreq stats inconsistent as
+	 * cpufreq-stats would fail to register because current frequency of CPU
+	 * isn't found in freq-table.
+	 *
+	 * Because we don't want this change to effect boot process badly, we go
+	 * for the next freq which is >= policy->cur ('cur' must be set by now,
+	 * otherwise we will end up setting freq to lowest of the table as 'cur'
+	 * is initialized to zero).
+	 *
+	 * We are passing target-freq as "policy->cur - 1" otherwise
+	 * __cpufreq_driver_target() would simply fail, as policy->cur will be
+	 * equal to target-freq.
+	 */
+	if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK)
+	    && has_target()) {
+		/* Are we running at unknown frequency ? */
+		ret = cpufreq_frequency_table_get_index(policy, policy->cur);
+		if (ret == -EINVAL) {
+			/* Warn user and fix it */
+			pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n",
+				__func__, policy->cpu, policy->cur);
+			ret = __cpufreq_driver_target(policy, policy->cur - 1,
+				CPUFREQ_RELATION_L);
+
+			/*
+			 * Reaching here after boot in a few seconds may not
+			 * mean that system will remain stable at "unknown"
+			 * frequency for longer duration. Hence, a BUG_ON().
+			 */
+			BUG_ON(ret);
+			pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n",
+				__func__, policy->cpu, policy->cur);
+		}
+	}
+
+	if (new_policy) {
+		ret = cpufreq_add_dev_interface(policy);
+		if (ret)
+			goto out_exit_policy;
+
+		cpufreq_stats_create_table(policy);
+		cpufreq_times_create_policy(policy);
+
+		write_lock_irqsave(&cpufreq_driver_lock, flags);
+		list_add(&policy->policy_list, &cpufreq_policy_list);
+		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	}
+
+	ret = cpufreq_init_policy(policy);
+	if (ret) {
+		pr_err("%s: Failed to initialize policy for cpu: %d (%d)\n",
+		       __func__, cpu, ret);
+		/* cpufreq_policy_free() will notify based on this */
+		new_policy = false;
+		goto out_exit_policy;
+	}
+
+	up_write(&policy->rwsem);
+
+	kobject_uevent(&policy->kobj, KOBJ_ADD);
+
+	/* Callback for handling stuff after policy is ready */
+	if (cpufreq_driver->ready)
+		cpufreq_driver->ready(policy);
+
+	pr_debug("initialization complete\n");
+
+	return 0;
+
+out_exit_policy:
+	for_each_cpu(j, policy->real_cpus)
+		remove_cpu_dev_symlink(policy, get_cpu_device(j));
+
+	up_write(&policy->rwsem);
+
+	if (cpufreq_driver->exit)
+		cpufreq_driver->exit(policy);
+
+out_free_policy:
+	cpufreq_policy_free(policy);
+	return ret;
+}
+
+/**
+ * cpufreq_add_dev - the cpufreq interface for a CPU device.
+ * @dev: CPU device.
+ * @sif: Subsystem interface structure pointer (not used)
+ */
+static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
+{
+	struct cpufreq_policy *policy;
+	unsigned cpu = dev->id;
+	int ret;
+
+	dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu);
+
+	if (cpu_online(cpu)) {
+		ret = cpufreq_online(cpu);
+		if (ret)
+			return ret;
+	}
+
+	/* Create sysfs link on CPU registration */
+	policy = per_cpu(cpufreq_cpu_data, cpu);
+	if (policy)
+		add_cpu_dev_symlink(policy, cpu);
+
+	return 0;
+}
+
+static int cpufreq_offline(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+	int ret;
+
+	pr_debug("%s: unregistering CPU %u\n", __func__, cpu);
+
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (!policy) {
+		pr_debug("%s: No cpu_data found\n", __func__);
+		return 0;
+	}
+
+	down_write(&policy->rwsem);
+	if (has_target())
+		cpufreq_stop_governor(policy);
+
+	cpumask_clear_cpu(cpu, policy->cpus);
+
+	if (policy_is_inactive(policy)) {
+		if (has_target())
+			strncpy(policy->last_governor, policy->governor->name,
+				CPUFREQ_NAME_LEN);
+		else
+			policy->last_policy = policy->policy;
+	} else if (cpu == policy->cpu) {
+		/* Nominate new CPU */
+		policy->cpu = cpumask_any(policy->cpus);
+	}
+
+	/* Start governor again for active policy */
+	if (!policy_is_inactive(policy)) {
+		if (has_target()) {
+			ret = cpufreq_start_governor(policy);
+			if (ret)
+				pr_err("%s: Failed to start governor\n", __func__);
+		}
+
+		goto unlock;
+	}
+
+	if (cpufreq_driver->stop_cpu)
+		cpufreq_driver->stop_cpu(policy);
+
+	if (has_target())
+		cpufreq_exit_governor(policy);
+
+	/*
+	 * Perform the ->exit() even during light-weight tear-down,
+	 * since this is a core component, and is essential for the
+	 * subsequent light-weight ->init() to succeed.
+	 */
+	if (cpufreq_driver->exit) {
+		cpufreq_driver->exit(policy);
+		policy->freq_table = NULL;
+	}
+
+unlock:
+	up_write(&policy->rwsem);
+	return 0;
+}
+
+/**
+ * cpufreq_remove_dev - remove a CPU device
+ *
+ * Removes the cpufreq interface for a CPU device.
+ */
+static void cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
+{
+	unsigned int cpu = dev->id;
+	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+
+	if (!policy)
+		return;
+
+	if (cpu_online(cpu))
+		cpufreq_offline(cpu);
+
+	cpumask_clear_cpu(cpu, policy->real_cpus);
+	remove_cpu_dev_symlink(policy, dev);
+
+	if (cpumask_empty(policy->real_cpus))
+		cpufreq_policy_free(policy);
+}
+
+/**
+ *	cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're
+ *	in deep trouble.
+ *	@policy: policy managing CPUs
+ *	@new_freq: CPU frequency the CPU actually runs at
+ *
+ *	We adjust to current frequency first, and need to clean up later.
+ *	So either call to cpufreq_update_policy() or schedule handle_update()).
+ */
+static void cpufreq_out_of_sync(struct cpufreq_policy *policy,
+				unsigned int new_freq)
+{
+	struct cpufreq_freqs freqs;
+
+	pr_debug("Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz\n",
+		 policy->cur, new_freq);
+
+	freqs.old = policy->cur;
+	freqs.new = new_freq;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	cpufreq_freq_transition_end(policy, &freqs, 0);
+}
+
+/**
+ * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
+ * @cpu: CPU number
+ *
+ * This is the last known freq, without actually getting it from the driver.
+ * Return value will be same as what is shown in scaling_cur_freq in sysfs.
+ */
+unsigned int cpufreq_quick_get(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+	unsigned int ret_freq = 0;
+	unsigned long flags;
+
+	read_lock_irqsave(&cpufreq_driver_lock, flags);
+
+	if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) {
+		ret_freq = cpufreq_driver->get(cpu);
+		read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		return ret_freq;
+	}
+
+	read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	policy = cpufreq_cpu_get(cpu);
+	if (policy) {
+		ret_freq = policy->cur;
+		cpufreq_cpu_put(policy);
+	}
+
+	return ret_freq;
+}
+EXPORT_SYMBOL(cpufreq_quick_get);
+
+/**
+ * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU
+ * @cpu: CPU number
+ *
+ * Just return the max possible frequency for a given CPU.
+ */
+unsigned int cpufreq_quick_get_max(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	unsigned int ret_freq = 0;
+
+	if (policy) {
+		ret_freq = policy->max;
+		cpufreq_cpu_put(policy);
+	}
+
+	return ret_freq;
+}
+EXPORT_SYMBOL(cpufreq_quick_get_max);
+
+static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
+{
+	unsigned int ret_freq = 0;
+
+	if (unlikely(policy_is_inactive(policy)) || !cpufreq_driver->get)
+		return ret_freq;
+
+	ret_freq = cpufreq_driver->get(policy->cpu);
+
+	/*
+	 * If fast frequency switching is used with the given policy, the check
+	 * against policy->cur is pointless, so skip it in that case too.
+	 */
+	if (policy->fast_switch_enabled)
+		return ret_freq;
+
+	if (ret_freq && policy->cur &&
+		!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+		/* verify no discrepancy between actual and
+					saved value exists */
+		if (unlikely(ret_freq != policy->cur)) {
+			cpufreq_out_of_sync(policy, ret_freq);
+			schedule_work(&policy->update);
+		}
+	}
+
+	return ret_freq;
+}
+
+/**
+ * cpufreq_get - get the current CPU frequency (in kHz)
+ * @cpu: CPU number
+ *
+ * Get the CPU current (static) CPU frequency
+ */
+unsigned int cpufreq_get(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	unsigned int ret_freq = 0;
+
+	if (policy) {
+		down_read(&policy->rwsem);
+		ret_freq = __cpufreq_get(policy);
+		up_read(&policy->rwsem);
+
+		cpufreq_cpu_put(policy);
+	}
+
+	return ret_freq;
+}
+EXPORT_SYMBOL(cpufreq_get);
+
+static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy)
+{
+	unsigned int new_freq;
+
+	new_freq = cpufreq_driver->get(policy->cpu);
+	if (!new_freq)
+		return 0;
+
+	if (!policy->cur) {
+		pr_debug("cpufreq: Driver did not initialize current freq\n");
+		policy->cur = new_freq;
+	} else if (policy->cur != new_freq && has_target()) {
+		cpufreq_out_of_sync(policy, new_freq);
+	}
+
+	return new_freq;
+}
+
+static struct subsys_interface cpufreq_interface = {
+	.name		= "cpufreq",
+	.subsys		= &cpu_subsys,
+	.add_dev	= cpufreq_add_dev,
+	.remove_dev	= cpufreq_remove_dev,
+};
+
+/*
+ * In case platform wants some specific frequency to be configured
+ * during suspend..
+ */
+int cpufreq_generic_suspend(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	if (!policy->suspend_freq) {
+		pr_debug("%s: suspend_freq not defined\n", __func__);
+		return 0;
+	}
+
+	pr_debug("%s: Setting suspend-freq: %u\n", __func__,
+			policy->suspend_freq);
+
+	ret = __cpufreq_driver_target(policy, policy->suspend_freq,
+			CPUFREQ_RELATION_H);
+	if (ret)
+		pr_err("%s: unable to set suspend-freq: %u. err: %d\n",
+				__func__, policy->suspend_freq, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpufreq_generic_suspend);
+
+/**
+ * cpufreq_suspend() - Suspend CPUFreq governors
+ *
+ * Called during system wide Suspend/Hibernate cycles for suspending governors
+ * as some platforms can't change frequency after this point in suspend cycle.
+ * Because some of the devices (like: i2c, regulators, etc) they use for
+ * changing frequency are suspended quickly after this point.
+ */
+void cpufreq_suspend(void)
+{
+	struct cpufreq_policy *policy;
+
+	if (!cpufreq_driver)
+		return;
+
+	if (!has_target() && !cpufreq_driver->suspend)
+		goto suspend;
+
+	pr_debug("%s: Suspending Governors\n", __func__);
+
+	for_each_active_policy(policy) {
+		if (has_target()) {
+			down_write(&policy->rwsem);
+			cpufreq_stop_governor(policy);
+			up_write(&policy->rwsem);
+		}
+
+		if (cpufreq_driver->suspend && cpufreq_driver->suspend(policy))
+			pr_err("%s: Failed to suspend driver: %p\n", __func__,
+				policy);
+	}
+
+suspend:
+	cpufreq_suspended = true;
+}
+
+/**
+ * cpufreq_resume() - Resume CPUFreq governors
+ *
+ * Called during system wide Suspend/Hibernate cycle for resuming governors that
+ * are suspended with cpufreq_suspend().
+ */
+void cpufreq_resume(void)
+{
+	struct cpufreq_policy *policy;
+	int ret;
+
+	if (!cpufreq_driver)
+		return;
+
+	if (unlikely(!cpufreq_suspended))
+		return;
+
+	cpufreq_suspended = false;
+
+	if (!has_target() && !cpufreq_driver->resume)
+		return;
+
+	pr_debug("%s: Resuming Governors\n", __func__);
+
+	for_each_active_policy(policy) {
+		if (cpufreq_driver->resume && cpufreq_driver->resume(policy)) {
+			pr_err("%s: Failed to resume driver: %p\n", __func__,
+				policy);
+		} else if (has_target()) {
+			down_write(&policy->rwsem);
+			ret = cpufreq_start_governor(policy);
+			up_write(&policy->rwsem);
+
+			if (ret)
+				pr_err("%s: Failed to start governor for policy: %p\n",
+				       __func__, policy);
+		}
+	}
+}
+
+/**
+ *	cpufreq_get_current_driver - return current driver's name
+ *
+ *	Return the name string of the currently loaded cpufreq driver
+ *	or NULL, if none.
+ */
+const char *cpufreq_get_current_driver(void)
+{
+	if (cpufreq_driver)
+		return cpufreq_driver->name;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_current_driver);
+
+/**
+ *	cpufreq_get_driver_data - return current driver data
+ *
+ *	Return the private data of the currently loaded cpufreq
+ *	driver, or NULL if no cpufreq driver is loaded.
+ */
+void *cpufreq_get_driver_data(void)
+{
+	if (cpufreq_driver)
+		return cpufreq_driver->driver_data;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_driver_data);
+
+/*********************************************************************
+ *                     NOTIFIER LISTS INTERFACE                      *
+ *********************************************************************/
+
+/**
+ *	cpufreq_register_notifier - register a driver with cpufreq
+ *	@nb: notifier function to register
+ *      @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
+ *
+ *	Add a driver to one of two lists: either a list of drivers that
+ *      are notified about clock rate changes (once before and once after
+ *      the transition), or a list of drivers that are notified about
+ *      changes in cpufreq policy.
+ *
+ *	This function may sleep, and has the same return conditions as
+ *	blocking_notifier_chain_register.
+ */
+int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
+{
+	int ret;
+
+	if (cpufreq_disabled())
+		return -EINVAL;
+
+	WARN_ON(!init_cpufreq_transition_notifier_list_called);
+
+	switch (list) {
+	case CPUFREQ_TRANSITION_NOTIFIER:
+		mutex_lock(&cpufreq_fast_switch_lock);
+
+		if (cpufreq_fast_switch_count > 0) {
+			mutex_unlock(&cpufreq_fast_switch_lock);
+			return -EBUSY;
+		}
+		ret = srcu_notifier_chain_register(
+				&cpufreq_transition_notifier_list, nb);
+		if (!ret)
+			cpufreq_fast_switch_count--;
+
+		mutex_unlock(&cpufreq_fast_switch_lock);
+		break;
+	case CPUFREQ_POLICY_NOTIFIER:
+		ret = blocking_notifier_chain_register(
+				&cpufreq_policy_notifier_list, nb);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(cpufreq_register_notifier);
+
+/**
+ *	cpufreq_unregister_notifier - unregister a driver with cpufreq
+ *	@nb: notifier block to be unregistered
+ *	@list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
+ *
+ *	Remove a driver from the CPU frequency notifier list.
+ *
+ *	This function may sleep, and has the same return conditions as
+ *	blocking_notifier_chain_unregister.
+ */
+int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list)
+{
+	int ret;
+
+	if (cpufreq_disabled())
+		return -EINVAL;
+
+	switch (list) {
+	case CPUFREQ_TRANSITION_NOTIFIER:
+		mutex_lock(&cpufreq_fast_switch_lock);
+
+		ret = srcu_notifier_chain_unregister(
+				&cpufreq_transition_notifier_list, nb);
+		if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0))
+			cpufreq_fast_switch_count++;
+
+		mutex_unlock(&cpufreq_fast_switch_lock);
+		break;
+	case CPUFREQ_POLICY_NOTIFIER:
+		ret = blocking_notifier_chain_unregister(
+				&cpufreq_policy_notifier_list, nb);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(cpufreq_unregister_notifier);
+
+
+/*********************************************************************
+ *                              GOVERNORS                            *
+ *********************************************************************/
+
+/**
+ * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch.
+ * @policy: cpufreq policy to switch the frequency for.
+ * @target_freq: New frequency to set (may be approximate).
+ *
+ * Carry out a fast frequency switch without sleeping.
+ *
+ * The driver's ->fast_switch() callback invoked by this function must be
+ * suitable for being called from within RCU-sched read-side critical sections
+ * and it is expected to select the minimum available frequency greater than or
+ * equal to @target_freq (CPUFREQ_RELATION_L).
+ *
+ * This function must not be called if policy->fast_switch_enabled is unset.
+ *
+ * Governors calling this function must guarantee that it will never be invoked
+ * twice in parallel for the same policy and that it will never be called in
+ * parallel with either ->target() or ->target_index() for the same policy.
+ *
+ * Returns the actual frequency set for the CPU.
+ *
+ * If 0 is returned by the driver's ->fast_switch() callback to indicate an
+ * error condition, the hardware configuration must be preserved.
+ */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+					unsigned int target_freq)
+{
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
+
+	return cpufreq_driver->fast_switch(policy, target_freq);
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch);
+
+/* Must set freqs->new to intermediate frequency */
+static int __target_intermediate(struct cpufreq_policy *policy,
+				 struct cpufreq_freqs *freqs, int index)
+{
+	int ret;
+
+	freqs->new = cpufreq_driver->get_intermediate(policy, index);
+
+	/* We don't need to switch to intermediate freq */
+	if (!freqs->new)
+		return 0;
+
+	pr_debug("%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\n",
+		 __func__, policy->cpu, freqs->old, freqs->new);
+
+	cpufreq_freq_transition_begin(policy, freqs);
+	ret = cpufreq_driver->target_intermediate(policy, index);
+	cpufreq_freq_transition_end(policy, freqs, ret);
+
+	if (ret)
+		pr_err("%s: Failed to change to intermediate frequency: %d\n",
+		       __func__, ret);
+
+	return ret;
+}
+
+static int __target_index(struct cpufreq_policy *policy, int index)
+{
+	struct cpufreq_freqs freqs = {.old = policy->cur, .flags = 0};
+	unsigned int intermediate_freq = 0;
+	unsigned int newfreq = policy->freq_table[index].frequency;
+	int retval = -EINVAL;
+	bool notify;
+
+	if (newfreq == policy->cur)
+		return 0;
+
+	notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION);
+	if (notify) {
+		/* Handle switching to intermediate frequency */
+		if (cpufreq_driver->get_intermediate) {
+			retval = __target_intermediate(policy, &freqs, index);
+			if (retval)
+				return retval;
+
+			intermediate_freq = freqs.new;
+			/* Set old freq to intermediate */
+			if (intermediate_freq)
+				freqs.old = freqs.new;
+		}
+
+		freqs.new = newfreq;
+		pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n",
+			 __func__, policy->cpu, freqs.old, freqs.new);
+
+		cpufreq_freq_transition_begin(policy, &freqs);
+	}
+
+	retval = cpufreq_driver->target_index(policy, index);
+	if (retval)
+		pr_err("%s: Failed to change cpu frequency: %d\n", __func__,
+		       retval);
+
+	if (notify) {
+		cpufreq_freq_transition_end(policy, &freqs, retval);
+
+		/*
+		 * Failed after setting to intermediate freq? Driver should have
+		 * reverted back to initial frequency and so should we. Check
+		 * here for intermediate_freq instead of get_intermediate, in
+		 * case we haven't switched to intermediate freq at all.
+		 */
+		if (unlikely(retval && intermediate_freq)) {
+			freqs.old = intermediate_freq;
+			freqs.new = policy->restore_freq;
+			cpufreq_freq_transition_begin(policy, &freqs);
+			cpufreq_freq_transition_end(policy, &freqs, 0);
+		}
+	}
+
+	return retval;
+}
+
+int __cpufreq_driver_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int old_target_freq = target_freq;
+	int index;
+
+	if (cpufreq_disabled())
+		return -ENODEV;
+
+	/* Make sure that target_freq is within supported range */
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
+
+	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
+		 policy->cpu, target_freq, relation, old_target_freq);
+
+	/*
+	 * This might look like a redundant call as we are checking it again
+	 * after finding index. But it is left intentionally for cases where
+	 * exactly same freq is called again and so we can save on few function
+	 * calls.
+	 */
+	if (target_freq == policy->cur)
+		return 0;
+
+	/* Save last value to restore later on errors */
+	policy->restore_freq = policy->cur;
+
+	if (cpufreq_driver->target)
+		return cpufreq_driver->target(policy, target_freq, relation);
+
+	if (!cpufreq_driver->target_index)
+		return -EINVAL;
+
+	index = cpufreq_frequency_table_target(policy, target_freq, relation);
+
+	return __target_index(policy, index);
+}
+EXPORT_SYMBOL_GPL(__cpufreq_driver_target);
+
+int cpufreq_driver_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	int ret = -EINVAL;
+
+	down_write(&policy->rwsem);
+
+	ret = __cpufreq_driver_target(policy, target_freq, relation);
+
+	up_write(&policy->rwsem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+
+__weak struct cpufreq_governor *cpufreq_fallback_governor(void)
+{
+	return NULL;
+}
+
+static int cpufreq_init_governor(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	/* Don't start any governor operations if we are entering suspend */
+	if (cpufreq_suspended)
+		return 0;
+	/*
+	 * Governor might not be initiated here if ACPI _PPC changed
+	 * notification happened, so check it.
+	 */
+	if (!policy->governor)
+		return -EINVAL;
+
+	/* Platform doesn't want dynamic frequency switching ? */
+	if (policy->governor->dynamic_switching &&
+	    cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) {
+		struct cpufreq_governor *gov = cpufreq_fallback_governor();
+
+		if (gov) {
+			pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n",
+				policy->governor->name, gov->name);
+			policy->governor = gov;
+		} else {
+			return -EINVAL;
+		}
+	}
+
+	if (!try_module_get(policy->governor->owner))
+		return -EINVAL;
+
+	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
+
+	if (policy->governor->init) {
+		ret = policy->governor->init(policy);
+		if (ret) {
+			module_put(policy->governor->owner);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void cpufreq_exit_governor(struct cpufreq_policy *policy)
+{
+	if (cpufreq_suspended || !policy->governor)
+		return;
+
+	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
+
+	if (policy->governor->exit)
+		policy->governor->exit(policy);
+
+	module_put(policy->governor->owner);
+}
+
+static int cpufreq_start_governor(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	if (cpufreq_suspended)
+		return 0;
+
+	if (!policy->governor)
+		return -EINVAL;
+
+	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
+
+	if (cpufreq_driver->get && !cpufreq_driver->setpolicy)
+		cpufreq_update_current_freq(policy);
+
+	if (policy->governor->start) {
+		ret = policy->governor->start(policy);
+		if (ret)
+			return ret;
+	}
+
+	if (policy->governor->limits)
+		policy->governor->limits(policy);
+
+	return 0;
+}
+
+static void cpufreq_stop_governor(struct cpufreq_policy *policy)
+{
+	if (cpufreq_suspended || !policy->governor)
+		return;
+
+	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
+
+	if (policy->governor->stop)
+		policy->governor->stop(policy);
+}
+
+static void cpufreq_governor_limits(struct cpufreq_policy *policy)
+{
+	if (cpufreq_suspended || !policy->governor)
+		return;
+
+	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
+
+	if (policy->governor->limits)
+		policy->governor->limits(policy);
+}
+
+int cpufreq_register_governor(struct cpufreq_governor *governor)
+{
+	int err;
+
+	if (!governor)
+		return -EINVAL;
+
+	if (cpufreq_disabled())
+		return -ENODEV;
+
+	mutex_lock(&cpufreq_governor_mutex);
+
+	err = -EBUSY;
+	if (!find_governor(governor->name)) {
+		err = 0;
+		list_add(&governor->governor_list, &cpufreq_governor_list);
+	}
+
+	mutex_unlock(&cpufreq_governor_mutex);
+	return err;
+}
+EXPORT_SYMBOL_GPL(cpufreq_register_governor);
+
+void cpufreq_unregister_governor(struct cpufreq_governor *governor)
+{
+	struct cpufreq_policy *policy;
+	unsigned long flags;
+
+	if (!governor)
+		return;
+
+	if (cpufreq_disabled())
+		return;
+
+	/* clear last_governor for all inactive policies */
+	read_lock_irqsave(&cpufreq_driver_lock, flags);
+	for_each_inactive_policy(policy) {
+		if (!strcmp(policy->last_governor, governor->name)) {
+			policy->governor = NULL;
+			strcpy(policy->last_governor, "\0");
+		}
+	}
+	read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	mutex_lock(&cpufreq_governor_mutex);
+	list_del(&governor->governor_list);
+	mutex_unlock(&cpufreq_governor_mutex);
+	return;
+}
+EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
+
+
+/*********************************************************************
+ *                          POLICY INTERFACE                         *
+ *********************************************************************/
+
+/**
+ * cpufreq_get_policy - get the current cpufreq_policy
+ * @policy: struct cpufreq_policy into which the current cpufreq_policy
+ *	is written
+ *
+ * Reads the current cpufreq policy.
+ */
+int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu)
+{
+	struct cpufreq_policy *cpu_policy;
+	if (!policy)
+		return -EINVAL;
+
+	cpu_policy = cpufreq_cpu_get(cpu);
+	if (!cpu_policy)
+		return -EINVAL;
+
+	memcpy(policy, cpu_policy, sizeof(*policy));
+
+	cpufreq_cpu_put(cpu_policy);
+	return 0;
+}
+EXPORT_SYMBOL(cpufreq_get_policy);
+
+/*
+ * policy : current policy.
+ * new_policy: policy to be set.
+ */
+static int cpufreq_set_policy(struct cpufreq_policy *policy,
+				struct cpufreq_policy *new_policy)
+{
+	struct cpufreq_governor *old_gov;
+	int ret;
+
+	pr_debug("setting new policy for CPU %u: %u - %u kHz\n",
+		 new_policy->cpu, new_policy->min, new_policy->max);
+
+	memcpy(&new_policy->cpuinfo, &policy->cpuinfo, sizeof(policy->cpuinfo));
+
+	/*
+	* This check works well when we store new min/max freq attributes,
+	* because new_policy is a copy of policy with one field updated.
+	*/
+	if (new_policy->min > new_policy->max)
+		return -EINVAL;
+
+	/* verify the cpu speed can be set within this limit */
+	ret = cpufreq_driver->verify(new_policy);
+	if (ret)
+		return ret;
+
+	/* adjust if necessary - all reasons */
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+			CPUFREQ_ADJUST, new_policy);
+
+	/*
+	 * verify the cpu speed can be set within this limit, which might be
+	 * different to the first one
+	 */
+	ret = cpufreq_driver->verify(new_policy);
+	if (ret)
+		return ret;
+
+	/* notification of the new policy */
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+			CPUFREQ_NOTIFY, new_policy);
+
+	policy->min = new_policy->min;
+	policy->max = new_policy->max;
+
+	arch_set_max_freq_scale(policy->cpus, policy->max);
+
+	trace_cpu_frequency_limits(policy->max, policy->min, policy->cpu);
+
+	policy->cached_target_freq = UINT_MAX;
+
+	pr_debug("new min and max freqs are %u - %u kHz\n",
+		 policy->min, policy->max);
+
+	if (cpufreq_driver->setpolicy) {
+		policy->policy = new_policy->policy;
+		pr_debug("setting range\n");
+		return cpufreq_driver->setpolicy(new_policy);
+	}
+
+	if (new_policy->governor == policy->governor) {
+		pr_debug("cpufreq: governor limits update\n");
+		cpufreq_governor_limits(policy);
+		return 0;
+	}
+
+	pr_debug("governor switch\n");
+
+	/* save old, working values */
+	old_gov = policy->governor;
+	/* end old governor */
+	if (old_gov) {
+		cpufreq_stop_governor(policy);
+		cpufreq_exit_governor(policy);
+	}
+
+	/* start new governor */
+	policy->governor = new_policy->governor;
+	ret = cpufreq_init_governor(policy);
+	if (!ret) {
+		ret = cpufreq_start_governor(policy);
+		if (!ret) {
+			pr_debug("cpufreq: governor change\n");
+			return 0;
+		}
+		cpufreq_exit_governor(policy);
+	}
+
+	/* new governor failed, so re-start old one */
+	pr_debug("starting governor %s failed\n", policy->governor->name);
+	if (old_gov) {
+		policy->governor = old_gov;
+		if (cpufreq_init_governor(policy))
+			policy->governor = NULL;
+		else
+			cpufreq_start_governor(policy);
+	}
+
+	return ret;
+}
+
+/**
+ *	cpufreq_update_policy - re-evaluate an existing cpufreq policy
+ *	@cpu: CPU which shall be re-evaluated
+ *
+ *	Useful for policy notifiers which have different necessities
+ *	at different times.
+ */
+void cpufreq_update_policy(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	struct cpufreq_policy new_policy;
+
+	if (!policy)
+		return;
+
+	down_write(&policy->rwsem);
+
+	if (policy_is_inactive(policy))
+		goto unlock;
+
+	pr_debug("updating policy for CPU %u\n", cpu);
+	memcpy(&new_policy, policy, sizeof(*policy));
+	new_policy.min = policy->user_policy.min;
+	new_policy.max = policy->user_policy.max;
+
+	/*
+	 * BIOS might change freq behind our back
+	 * -> ask driver for current freq and notify governors about a change
+	 */
+	if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
+		if (cpufreq_suspended)
+			goto unlock;
+
+		new_policy.cur = cpufreq_update_current_freq(policy);
+		if (WARN_ON(!new_policy.cur))
+			goto unlock;
+	}
+
+	cpufreq_set_policy(policy, &new_policy);
+
+unlock:
+	up_write(&policy->rwsem);
+
+	cpufreq_cpu_put(policy);
+}
+EXPORT_SYMBOL(cpufreq_update_policy);
+
+/*********************************************************************
+ *               BOOST						     *
+ *********************************************************************/
+static int cpufreq_boost_set_sw(int state)
+{
+	struct cpufreq_policy *policy;
+	int ret = -EINVAL;
+
+	for_each_active_policy(policy) {
+		if (!policy->freq_table)
+			continue;
+
+		ret = cpufreq_frequency_table_cpuinfo(policy,
+						      policy->freq_table);
+		if (ret) {
+			pr_err("%s: Policy frequency update failed\n",
+			       __func__);
+			break;
+		}
+
+		down_write(&policy->rwsem);
+		policy->user_policy.max = policy->max;
+		cpufreq_governor_limits(policy);
+		up_write(&policy->rwsem);
+	}
+
+	return ret;
+}
+
+int cpufreq_boost_trigger_state(int state)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (cpufreq_driver->boost_enabled == state)
+		return 0;
+
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+	cpufreq_driver->boost_enabled = state;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	ret = cpufreq_driver->set_boost(state);
+	if (ret) {
+		write_lock_irqsave(&cpufreq_driver_lock, flags);
+		cpufreq_driver->boost_enabled = !state;
+		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+		pr_err("%s: Cannot %s BOOST\n",
+		       __func__, state ? "enable" : "disable");
+	}
+
+	return ret;
+}
+
+static bool cpufreq_boost_supported(void)
+{
+	return likely(cpufreq_driver) && cpufreq_driver->set_boost;
+}
+
+static int create_boost_sysfs_file(void)
+{
+	int ret;
+
+	ret = sysfs_create_file(cpufreq_global_kobject, &boost.attr);
+	if (ret)
+		pr_err("%s: cannot register global BOOST sysfs file\n",
+		       __func__);
+
+	return ret;
+}
+
+static void remove_boost_sysfs_file(void)
+{
+	if (cpufreq_boost_supported())
+		sysfs_remove_file(cpufreq_global_kobject, &boost.attr);
+}
+
+int cpufreq_enable_boost_support(void)
+{
+	if (!cpufreq_driver)
+		return -EINVAL;
+
+	if (cpufreq_boost_supported())
+		return 0;
+
+	cpufreq_driver->set_boost = cpufreq_boost_set_sw;
+
+	/* This will get removed on driver unregister */
+	return create_boost_sysfs_file();
+}
+EXPORT_SYMBOL_GPL(cpufreq_enable_boost_support);
+
+int cpufreq_boost_enabled(void)
+{
+	return cpufreq_driver->boost_enabled;
+}
+EXPORT_SYMBOL_GPL(cpufreq_boost_enabled);
+
+/*********************************************************************
+ *               FREQUENCY INVARIANT ACCOUNTING SUPPORT              *
+ *********************************************************************/
+
+__weak void arch_set_freq_scale(struct cpumask *cpus,
+				unsigned long cur_freq,
+				unsigned long max_freq)
+{
+}
+EXPORT_SYMBOL_GPL(arch_set_freq_scale);
+
+__weak void arch_set_max_freq_scale(struct cpumask *cpus,
+				    unsigned long policy_max_freq)
+{
+}
+EXPORT_SYMBOL_GPL(arch_set_max_freq_scale);
+
+/*********************************************************************
+ *               REGISTER / UNREGISTER CPUFREQ DRIVER                *
+ *********************************************************************/
+static enum cpuhp_state hp_online;
+
+static int cpuhp_cpufreq_online(unsigned int cpu)
+{
+	cpufreq_online(cpu);
+
+	return 0;
+}
+
+static int cpuhp_cpufreq_offline(unsigned int cpu)
+{
+	cpufreq_offline(cpu);
+
+	return 0;
+}
+
+/**
+ * cpufreq_register_driver - register a CPU Frequency driver
+ * @driver_data: A struct cpufreq_driver containing the values#
+ * submitted by the CPU Frequency driver.
+ *
+ * Registers a CPU Frequency driver to this core code. This code
+ * returns zero on success, -EEXIST when another driver got here first
+ * (and isn't unregistered in the meantime).
+ *
+ */
+int cpufreq_register_driver(struct cpufreq_driver *driver_data)
+{
+	unsigned long flags;
+	int ret;
+
+	if (cpufreq_disabled())
+		return -ENODEV;
+
+	/*
+	 * The cpufreq core depends heavily on the availability of device
+	 * structure, make sure they are available before proceeding further.
+	 */
+	if (!get_cpu_device(0))
+		return -EPROBE_DEFER;
+
+	if (!driver_data || !driver_data->verify || !driver_data->init ||
+	    !(driver_data->setpolicy || driver_data->target_index ||
+		    driver_data->target) ||
+	     (driver_data->setpolicy && (driver_data->target_index ||
+		    driver_data->target)) ||
+	     (!!driver_data->get_intermediate != !!driver_data->target_intermediate))
+		return -EINVAL;
+
+	pr_debug("trying to register driver %s\n", driver_data->name);
+
+	/* Protect against concurrent CPU online/offline. */
+	cpus_read_lock();
+
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+	if (cpufreq_driver) {
+		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		ret = -EEXIST;
+		goto out;
+	}
+	cpufreq_driver = driver_data;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+	if (driver_data->setpolicy)
+		driver_data->flags |= CPUFREQ_CONST_LOOPS;
+
+	if (cpufreq_boost_supported()) {
+		ret = create_boost_sysfs_file();
+		if (ret)
+			goto err_null_driver;
+	}
+
+	ret = subsys_interface_register(&cpufreq_interface);
+	if (ret)
+		goto err_boost_unreg;
+
+	if (!(cpufreq_driver->flags & CPUFREQ_STICKY) &&
+	    list_empty(&cpufreq_policy_list)) {
+		/* if all ->init() calls failed, unregister */
+		ret = -ENODEV;
+		pr_debug("%s: No CPU initialized for driver %s\n", __func__,
+			 driver_data->name);
+		goto err_if_unreg;
+	}
+
+	ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN,
+						   "cpufreq:online",
+						   cpuhp_cpufreq_online,
+						   cpuhp_cpufreq_offline);
+	if (ret < 0)
+		goto err_if_unreg;
+	hp_online = ret;
+	ret = 0;
+
+	pr_debug("driver %s up and running\n", driver_data->name);
+	goto out;
+
+err_if_unreg:
+	subsys_interface_unregister(&cpufreq_interface);
+err_boost_unreg:
+	remove_boost_sysfs_file();
+err_null_driver:
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+	cpufreq_driver = NULL;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+out:
+	cpus_read_unlock();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_register_driver);
+
+/**
+ * cpufreq_unregister_driver - unregister the current CPUFreq driver
+ *
+ * Unregister the current CPUFreq driver. Only call this if you have
+ * the right to do so, i.e. if you have succeeded in initialising before!
+ * Returns zero if successful, and -EINVAL if the cpufreq_driver is
+ * currently not initialised.
+ */
+int cpufreq_unregister_driver(struct cpufreq_driver *driver)
+{
+	unsigned long flags;
+
+	if (!cpufreq_driver || (driver != cpufreq_driver))
+		return -EINVAL;
+
+	pr_debug("unregistering driver %s\n", driver->name);
+
+	/* Protect against concurrent cpu hotplug */
+	cpus_read_lock();
+	subsys_interface_unregister(&cpufreq_interface);
+	remove_boost_sysfs_file();
+	cpuhp_remove_state_nocalls_cpuslocked(hp_online);
+
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+
+	cpufreq_driver = NULL;
+
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	cpus_read_unlock();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
+
+struct kobject *cpufreq_global_kobject;
+EXPORT_SYMBOL(cpufreq_global_kobject);
+
+static int __init cpufreq_core_init(void)
+{
+	if (cpufreq_disabled())
+		return -ENODEV;
+
+	cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
+	BUG_ON(!cpufreq_global_kobject);
+
+	return 0;
+}
+module_param(off, int, 0444);
+core_initcall(cpufreq_core_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_conservative.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_conservative.c
new file mode 100644
index 0000000..4268f87
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_conservative.c
@@ -0,0 +1,356 @@
+/*
+ *  drivers/cpufreq/cpufreq_conservative.c
+ *
+ *  Copyright (C)  2001 Russell King
+ *            (C)  2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *                      Jun Nakajima <jun.nakajima@intel.com>
+ *            (C)  2009 Alexander Clouter <alex@digriz.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include "cpufreq_governor.h"
+
+struct cs_policy_dbs_info {
+	struct policy_dbs_info policy_dbs;
+	unsigned int down_skip;
+	unsigned int requested_freq;
+};
+
+static inline struct cs_policy_dbs_info *to_dbs_info(struct policy_dbs_info *policy_dbs)
+{
+	return container_of(policy_dbs, struct cs_policy_dbs_info, policy_dbs);
+}
+
+struct cs_dbs_tuners {
+	unsigned int down_threshold;
+	unsigned int freq_step;
+};
+
+/* Conservative governor macros */
+#define DEF_FREQUENCY_UP_THRESHOLD		(80)
+#define DEF_FREQUENCY_DOWN_THRESHOLD		(20)
+#define DEF_FREQUENCY_STEP			(5)
+#define DEF_SAMPLING_DOWN_FACTOR		(1)
+#define MAX_SAMPLING_DOWN_FACTOR		(10)
+
+static inline unsigned int get_freq_step(struct cs_dbs_tuners *cs_tuners,
+					 struct cpufreq_policy *policy)
+{
+	unsigned int freq_step = (cs_tuners->freq_step * policy->max) / 100;
+
+	/* max freq cannot be less than 100. But who knows... */
+	if (unlikely(freq_step == 0))
+		freq_step = DEF_FREQUENCY_STEP;
+
+	return freq_step;
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency. Every sampling_rate *
+ * sampling_down_factor, we check, if current idle time is more than 80%
+ * (default), then we try to decrease frequency
+ *
+ * Frequency updates happen at minimum steps of 5% (default) of maximum
+ * frequency
+ */
+static unsigned int cs_dbs_update(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct cs_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs);
+	unsigned int requested_freq = dbs_info->requested_freq;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	unsigned int load = dbs_update(policy);
+	unsigned int freq_step;
+
+	/*
+	 * break out if we 'cannot' reduce the speed as the user might
+	 * want freq_step to be zero
+	 */
+	if (cs_tuners->freq_step == 0)
+		goto out;
+
+	/*
+	 * If requested_freq is out of range, it is likely that the limits
+	 * changed in the meantime, so fall back to current frequency in that
+	 * case.
+	 */
+	if (requested_freq > policy->max || requested_freq < policy->min) {
+		requested_freq = policy->cur;
+		dbs_info->requested_freq = requested_freq;
+	}
+
+	freq_step = get_freq_step(cs_tuners, policy);
+
+	/*
+	 * Decrease requested_freq one freq_step for each idle period that
+	 * we didn't update the frequency.
+	 */
+	if (policy_dbs->idle_periods < UINT_MAX) {
+		unsigned int freq_steps = policy_dbs->idle_periods * freq_step;
+
+		if (requested_freq > policy->min + freq_steps)
+			requested_freq -= freq_steps;
+		else
+			requested_freq = policy->min;
+
+		policy_dbs->idle_periods = UINT_MAX;
+	}
+
+	/* Check for frequency increase */
+	if (load > dbs_data->up_threshold) {
+		dbs_info->down_skip = 0;
+
+		/* if we are already at full speed then break out early */
+		if (requested_freq == policy->max)
+			goto out;
+
+		requested_freq += freq_step;
+		if (requested_freq > policy->max)
+			requested_freq = policy->max;
+
+		__cpufreq_driver_target(policy, requested_freq, CPUFREQ_RELATION_H);
+		dbs_info->requested_freq = requested_freq;
+		goto out;
+	}
+
+	/* if sampling_down_factor is active break out early */
+	if (++dbs_info->down_skip < dbs_data->sampling_down_factor)
+		goto out;
+	dbs_info->down_skip = 0;
+
+	/* Check for frequency decrease */
+	if (load < cs_tuners->down_threshold) {
+		/*
+		 * if we cannot reduce the frequency anymore, break out early
+		 */
+		if (requested_freq == policy->min)
+			goto out;
+
+		if (requested_freq > freq_step)
+			requested_freq -= freq_step;
+		else
+			requested_freq = policy->min;
+
+		__cpufreq_driver_target(policy, requested_freq, CPUFREQ_RELATION_L);
+		dbs_info->requested_freq = requested_freq;
+	}
+
+ out:
+	return dbs_data->sampling_rate;
+}
+
+/************************** sysfs interface ************************/
+
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+					  const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
+		return -EINVAL;
+
+	dbs_data->sampling_down_factor = input;
+	return count;
+}
+
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+				  const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1 || input > 100 || input <= cs_tuners->down_threshold)
+		return -EINVAL;
+
+	dbs_data->up_threshold = input;
+	return count;
+}
+
+static ssize_t store_down_threshold(struct gov_attr_set *attr_set,
+				    const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	/* cannot be lower than 1 otherwise freq will not fall */
+	if (ret != 1 || input < 1 || input > 100 ||
+			input >= dbs_data->up_threshold)
+		return -EINVAL;
+
+	cs_tuners->down_threshold = input;
+	return count;
+}
+
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+				      const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+
+	if (input > 1)
+		input = 1;
+
+	if (input == dbs_data->ignore_nice_load) /* nothing to do */
+		return count;
+
+	dbs_data->ignore_nice_load = input;
+
+	/* we need to re-evaluate prev_cpu_idle */
+	gov_update_cpu_data(dbs_data);
+
+	return count;
+}
+
+static ssize_t store_freq_step(struct gov_attr_set *attr_set, const char *buf,
+			       size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1)
+		return -EINVAL;
+
+	if (input > 100)
+		input = 100;
+
+	/*
+	 * no need to test here if freq_step is zero as the user might actually
+	 * want this, they would be crazy though :)
+	 */
+	cs_tuners->freq_step = input;
+	return count;
+}
+
+gov_show_one_common(sampling_rate);
+gov_show_one_common(sampling_down_factor);
+gov_show_one_common(up_threshold);
+gov_show_one_common(ignore_nice_load);
+gov_show_one(cs, down_threshold);
+gov_show_one(cs, freq_step);
+
+gov_attr_rw(sampling_rate);
+gov_attr_rw(sampling_down_factor);
+gov_attr_rw(up_threshold);
+gov_attr_rw(ignore_nice_load);
+gov_attr_rw(down_threshold);
+gov_attr_rw(freq_step);
+
+static struct attribute *cs_attributes[] = {
+	&sampling_rate.attr,
+	&sampling_down_factor.attr,
+	&up_threshold.attr,
+	&down_threshold.attr,
+	&ignore_nice_load.attr,
+	&freq_step.attr,
+	NULL
+};
+
+/************************** sysfs end ************************/
+
+static struct policy_dbs_info *cs_alloc(void)
+{
+	struct cs_policy_dbs_info *dbs_info;
+
+	dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL);
+	return dbs_info ? &dbs_info->policy_dbs : NULL;
+}
+
+static void cs_free(struct policy_dbs_info *policy_dbs)
+{
+	kfree(to_dbs_info(policy_dbs));
+}
+
+static int cs_init(struct dbs_data *dbs_data)
+{
+	struct cs_dbs_tuners *tuners;
+
+	tuners = kzalloc(sizeof(*tuners), GFP_KERNEL);
+	if (!tuners)
+		return -ENOMEM;
+
+	tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD;
+	tuners->freq_step = DEF_FREQUENCY_STEP;
+	dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
+	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
+	dbs_data->ignore_nice_load = 0;
+	dbs_data->tuners = tuners;
+
+	return 0;
+}
+
+static void cs_exit(struct dbs_data *dbs_data)
+{
+	kfree(dbs_data->tuners);
+}
+
+static void cs_start(struct cpufreq_policy *policy)
+{
+	struct cs_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data);
+
+	dbs_info->down_skip = 0;
+	dbs_info->requested_freq = policy->cur;
+}
+
+static struct dbs_governor cs_governor = {
+	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("conservative"),
+	.kobj_type = { .default_attrs = cs_attributes },
+	.gov_dbs_update = cs_dbs_update,
+	.alloc = cs_alloc,
+	.free = cs_free,
+	.init = cs_init,
+	.exit = cs_exit,
+	.start = cs_start,
+};
+
+#define CPU_FREQ_GOV_CONSERVATIVE	(&cs_governor.gov)
+
+static int __init cpufreq_gov_dbs_init(void)
+{
+	return cpufreq_register_governor(CPU_FREQ_GOV_CONSERVATIVE);
+}
+
+static void __exit cpufreq_gov_dbs_exit(void)
+{
+	cpufreq_unregister_governor(CPU_FREQ_GOV_CONSERVATIVE);
+}
+
+MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>");
+MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
+		"Low Latency Frequency Transition capable processors "
+		"optimised for use in a battery environment");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return CPU_FREQ_GOV_CONSERVATIVE;
+}
+
+fs_initcall(cpufreq_gov_dbs_init);
+#else
+module_init(cpufreq_gov_dbs_init);
+#endif
+module_exit(cpufreq_gov_dbs_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.c
new file mode 100644
index 0000000..146237a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.c
@@ -0,0 +1,576 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.c
+ *
+ * CPUFREQ governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/export.h>
+#include <linux/kernel_stat.h>
+#include <linux/slab.h>
+
+#include "cpufreq_governor.h"
+
+#define CPUFREQ_DBS_MIN_SAMPLING_INTERVAL	(2 * TICK_NSEC / NSEC_PER_USEC)
+
+static DEFINE_PER_CPU(struct cpu_dbs_info, cpu_dbs);
+
+static DEFINE_MUTEX(gov_dbs_data_mutex);
+
+/* Common sysfs tunables */
+/**
+ * store_sampling_rate - update sampling rate effective immediately if needed.
+ *
+ * If new rate is smaller than the old, simply updating
+ * dbs.sampling_rate might not be appropriate. For example, if the
+ * original sampling_rate was 1 second and the requested new sampling rate is 10
+ * ms because the user needs immediate reaction from ondemand governor, but not
+ * sure if higher frequency will be required or not, then, the governor may
+ * change the sampling rate too late; up to 1 second later. Thus, if we are
+ * reducing the sampling rate, we need to make the new value effective
+ * immediately.
+ *
+ * This must be called with dbs_data->mutex held, otherwise traversing
+ * policy_dbs_list isn't safe.
+ */
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
+			    size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct policy_dbs_info *policy_dbs;
+	unsigned int sampling_interval;
+	int ret;
+
+	ret = sscanf(buf, "%u", &sampling_interval);
+	if (ret != 1 || sampling_interval < CPUFREQ_DBS_MIN_SAMPLING_INTERVAL)
+		return -EINVAL;
+
+	dbs_data->sampling_rate = sampling_interval;
+
+	/*
+	 * We are operating under dbs_data->mutex and so the list and its
+	 * entries can't be freed concurrently.
+	 */
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
+		mutex_lock(&policy_dbs->update_mutex);
+		/*
+		 * On 32-bit architectures this may race with the
+		 * sample_delay_ns read in dbs_update_util_handler(), but that
+		 * really doesn't matter.  If the read returns a value that's
+		 * too big, the sample will be skipped, but the next invocation
+		 * of dbs_update_util_handler() (when the update has been
+		 * completed) will take a sample.
+		 *
+		 * If this runs in parallel with dbs_work_handler(), we may end
+		 * up overwriting the sample_delay_ns value that it has just
+		 * written, but it will be corrected next time a sample is
+		 * taken, so it shouldn't be significant.
+		 */
+		gov_update_sample_delay(policy_dbs, 0);
+		mutex_unlock(&policy_dbs->update_mutex);
+	}
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(store_sampling_rate);
+
+/**
+ * gov_update_cpu_data - Update CPU load data.
+ * @dbs_data: Top-level governor data pointer.
+ *
+ * Update CPU load data for all CPUs in the domain governed by @dbs_data
+ * (that may be a single policy or a bunch of them if governor tunables are
+ * system-wide).
+ *
+ * Call under the @dbs_data mutex.
+ */
+void gov_update_cpu_data(struct dbs_data *dbs_data)
+{
+	struct policy_dbs_info *policy_dbs;
+
+	list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) {
+		unsigned int j;
+
+		for_each_cpu(j, policy_dbs->policy->cpus) {
+			struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
+
+			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
+								  dbs_data->io_is_busy);
+			if (dbs_data->ignore_nice_load)
+				j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(gov_update_cpu_data);
+
+unsigned int dbs_update(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	unsigned int ignore_nice = dbs_data->ignore_nice_load;
+	unsigned int max_load = 0, idle_periods = UINT_MAX;
+	unsigned int sampling_rate, io_busy, j;
+
+	/*
+	 * Sometimes governors may use an additional multiplier to increase
+	 * sample delays temporarily.  Apply that multiplier to sampling_rate
+	 * so as to keep the wake-up-from-idle detection logic a bit
+	 * conservative.
+	 */
+	sampling_rate = dbs_data->sampling_rate * policy_dbs->rate_mult;
+	/*
+	 * For the purpose of ondemand, waiting for disk IO is an indication
+	 * that you're performance critical, and not that the system is actually
+	 * idle, so do not add the iowait time to the CPU idle time then.
+	 */
+	io_busy = dbs_data->io_is_busy;
+
+	/* Get Absolute Load */
+	for_each_cpu(j, policy->cpus) {
+		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
+		u64 update_time, cur_idle_time;
+		unsigned int idle_time, time_elapsed;
+		unsigned int load;
+
+		cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy);
+
+		time_elapsed = update_time - j_cdbs->prev_update_time;
+		j_cdbs->prev_update_time = update_time;
+
+		idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
+		j_cdbs->prev_cpu_idle = cur_idle_time;
+
+		if (ignore_nice) {
+			u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+
+			idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, NSEC_PER_USEC);
+			j_cdbs->prev_cpu_nice = cur_nice;
+		}
+
+		if (unlikely(!time_elapsed)) {
+			/*
+			 * That can only happen when this function is called
+			 * twice in a row with a very short interval between the
+			 * calls, so the previous load value can be used then.
+			 */
+			load = j_cdbs->prev_load;
+		} else if (unlikely((int)idle_time > 2 * sampling_rate &&
+				    j_cdbs->prev_load)) {
+			/*
+			 * If the CPU had gone completely idle and a task has
+			 * just woken up on this CPU now, it would be unfair to
+			 * calculate 'load' the usual way for this elapsed
+			 * time-window, because it would show near-zero load,
+			 * irrespective of how CPU intensive that task actually
+			 * was. This is undesirable for latency-sensitive bursty
+			 * workloads.
+			 *
+			 * To avoid this, reuse the 'load' from the previous
+			 * time-window and give this task a chance to start with
+			 * a reasonably high CPU frequency. However, that
+			 * shouldn't be over-done, lest we get stuck at a high
+			 * load (high frequency) for too long, even when the
+			 * current system load has actually dropped down, so
+			 * clear prev_load to guarantee that the load will be
+			 * computed again next time.
+			 *
+			 * Detecting this situation is easy: an unusually large
+			 * 'idle_time' (as compared to the sampling rate)
+			 * indicates this scenario.
+			 */
+			load = j_cdbs->prev_load;
+			j_cdbs->prev_load = 0;
+		} else {
+			if (time_elapsed >= idle_time) {
+				load = 100 * (time_elapsed - idle_time) / time_elapsed;
+			} else {
+				/*
+				 * That can happen if idle_time is returned by
+				 * get_cpu_idle_time_jiffy().  In that case
+				 * idle_time is roughly equal to the difference
+				 * between time_elapsed and "busy time" obtained
+				 * from CPU statistics.  Then, the "busy time"
+				 * can end up being greater than time_elapsed
+				 * (for example, if jiffies_64 and the CPU
+				 * statistics are updated by different CPUs),
+				 * so idle_time may in fact be negative.  That
+				 * means, though, that the CPU was busy all
+				 * the time (on the rough average) during the
+				 * last sampling interval and 100 can be
+				 * returned as the load.
+				 */
+				load = (int)idle_time < 0 ? 100 : 0;
+			}
+			j_cdbs->prev_load = load;
+		}
+
+		if (unlikely((int)idle_time > 2 * sampling_rate)) {
+			unsigned int periods = idle_time / sampling_rate;
+
+			if (periods < idle_periods)
+				idle_periods = periods;
+		}
+
+		if (load > max_load)
+			max_load = load;
+	}
+
+	policy_dbs->idle_periods = idle_periods;
+
+	return max_load;
+}
+EXPORT_SYMBOL_GPL(dbs_update);
+
+static void dbs_work_handler(struct work_struct *work)
+{
+	struct policy_dbs_info *policy_dbs;
+	struct cpufreq_policy *policy;
+	struct dbs_governor *gov;
+
+	policy_dbs = container_of(work, struct policy_dbs_info, work);
+	policy = policy_dbs->policy;
+	gov = dbs_governor_of(policy);
+
+	/*
+	 * Make sure cpufreq_governor_limits() isn't evaluating load or the
+	 * ondemand governor isn't updating the sampling rate in parallel.
+	 */
+	mutex_lock(&policy_dbs->update_mutex);
+	gov_update_sample_delay(policy_dbs, gov->gov_dbs_update(policy));
+	mutex_unlock(&policy_dbs->update_mutex);
+
+	/* Allow the utilization update handler to queue up more work. */
+	atomic_set(&policy_dbs->work_count, 0);
+	/*
+	 * If the update below is reordered with respect to the sample delay
+	 * modification, the utilization update handler may end up using a stale
+	 * sample delay value.
+	 */
+	smp_wmb();
+	policy_dbs->work_in_progress = false;
+}
+
+static void dbs_irq_work(struct irq_work *irq_work)
+{
+	struct policy_dbs_info *policy_dbs;
+
+	policy_dbs = container_of(irq_work, struct policy_dbs_info, irq_work);
+	schedule_work_on(smp_processor_id(), &policy_dbs->work);
+}
+
+static void dbs_update_util_handler(struct update_util_data *data, u64 time,
+				    unsigned int flags)
+{
+	struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util);
+	struct policy_dbs_info *policy_dbs = cdbs->policy_dbs;
+	u64 delta_ns, lst;
+
+	if (!cpufreq_can_do_remote_dvfs(policy_dbs->policy))
+		return;
+
+	/*
+	 * The work may not be allowed to be queued up right now.
+	 * Possible reasons:
+	 * - Work has already been queued up or is in progress.
+	 * - It is too early (too little time from the previous sample).
+	 */
+	if (policy_dbs->work_in_progress)
+		return;
+
+	/*
+	 * If the reads below are reordered before the check above, the value
+	 * of sample_delay_ns used in the computation may be stale.
+	 */
+	smp_rmb();
+	lst = READ_ONCE(policy_dbs->last_sample_time);
+	delta_ns = time - lst;
+	if ((s64)delta_ns < policy_dbs->sample_delay_ns)
+		return;
+
+	/*
+	 * If the policy is not shared, the irq_work may be queued up right away
+	 * at this point.  Otherwise, we need to ensure that only one of the
+	 * CPUs sharing the policy will do that.
+	 */
+	if (policy_dbs->is_shared) {
+		if (!atomic_add_unless(&policy_dbs->work_count, 1, 1))
+			return;
+
+		/*
+		 * If another CPU updated last_sample_time in the meantime, we
+		 * shouldn't be here, so clear the work counter and bail out.
+		 */
+		if (unlikely(lst != READ_ONCE(policy_dbs->last_sample_time))) {
+			atomic_set(&policy_dbs->work_count, 0);
+			return;
+		}
+	}
+
+	policy_dbs->last_sample_time = time;
+	policy_dbs->work_in_progress = true;
+	irq_work_queue(&policy_dbs->irq_work);
+}
+
+static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
+				unsigned int delay_us)
+{
+	struct cpufreq_policy *policy = policy_dbs->policy;
+	int cpu;
+
+	gov_update_sample_delay(policy_dbs, delay_us);
+	policy_dbs->last_sample_time = 0;
+
+	for_each_cpu(cpu, policy->cpus) {
+		struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
+
+		cpufreq_add_update_util_hook(cpu, &cdbs->update_util,
+					     dbs_update_util_handler);
+	}
+}
+
+static inline void gov_clear_update_util(struct cpufreq_policy *policy)
+{
+	int i;
+
+	for_each_cpu(i, policy->cpus)
+		cpufreq_remove_update_util_hook(i);
+
+	synchronize_sched();
+}
+
+static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy,
+						     struct dbs_governor *gov)
+{
+	struct policy_dbs_info *policy_dbs;
+	int j;
+
+	/* Allocate memory for per-policy governor data. */
+	policy_dbs = gov->alloc();
+	if (!policy_dbs)
+		return NULL;
+
+	policy_dbs->policy = policy;
+	mutex_init(&policy_dbs->update_mutex);
+	atomic_set(&policy_dbs->work_count, 0);
+	init_irq_work(&policy_dbs->irq_work, dbs_irq_work);
+	INIT_WORK(&policy_dbs->work, dbs_work_handler);
+
+	/* Set policy_dbs for all CPUs, online+offline */
+	for_each_cpu(j, policy->related_cpus) {
+		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
+
+		j_cdbs->policy_dbs = policy_dbs;
+	}
+	return policy_dbs;
+}
+
+static void free_policy_dbs_info(struct policy_dbs_info *policy_dbs,
+				 struct dbs_governor *gov)
+{
+	int j;
+
+	mutex_destroy(&policy_dbs->update_mutex);
+
+	for_each_cpu(j, policy_dbs->policy->related_cpus) {
+		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
+
+		j_cdbs->policy_dbs = NULL;
+		j_cdbs->update_util.func = NULL;
+	}
+	gov->free(policy_dbs);
+}
+
+int cpufreq_dbs_governor_init(struct cpufreq_policy *policy)
+{
+	struct dbs_governor *gov = dbs_governor_of(policy);
+	struct dbs_data *dbs_data;
+	struct policy_dbs_info *policy_dbs;
+	int ret = 0;
+
+	/* State should be equivalent to EXIT */
+	if (policy->governor_data)
+		return -EBUSY;
+
+	policy_dbs = alloc_policy_dbs_info(policy, gov);
+	if (!policy_dbs)
+		return -ENOMEM;
+
+	/* Protect gov->gdbs_data against concurrent updates. */
+	mutex_lock(&gov_dbs_data_mutex);
+
+	dbs_data = gov->gdbs_data;
+	if (dbs_data) {
+		if (WARN_ON(have_governor_per_policy())) {
+			ret = -EINVAL;
+			goto free_policy_dbs_info;
+		}
+		policy_dbs->dbs_data = dbs_data;
+		policy->governor_data = policy_dbs;
+
+		gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list);
+		goto out;
+	}
+
+	dbs_data = kzalloc(sizeof(*dbs_data), GFP_KERNEL);
+	if (!dbs_data) {
+		ret = -ENOMEM;
+		goto free_policy_dbs_info;
+	}
+
+	gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list);
+
+	ret = gov->init(dbs_data);
+	if (ret)
+		goto free_policy_dbs_info;
+
+	/*
+	 * The sampling interval should not be less than the transition latency
+	 * of the CPU and it also cannot be too small for dbs_update() to work
+	 * correctly.
+	 */
+	dbs_data->sampling_rate = max_t(unsigned int,
+					CPUFREQ_DBS_MIN_SAMPLING_INTERVAL,
+					cpufreq_policy_transition_delay_us(policy));
+
+	if (!have_governor_per_policy())
+		gov->gdbs_data = dbs_data;
+
+	policy_dbs->dbs_data = dbs_data;
+	policy->governor_data = policy_dbs;
+
+	gov->kobj_type.sysfs_ops = &governor_sysfs_ops;
+	ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type,
+				   get_governor_parent_kobj(policy),
+				   "%s", gov->gov.name);
+	if (!ret)
+		goto out;
+
+	/* Failure, so roll back. */
+	pr_err("initialization failed (dbs_data kobject init error %d)\n", ret);
+
+	kobject_put(&dbs_data->attr_set.kobj);
+
+	policy->governor_data = NULL;
+
+	if (!have_governor_per_policy())
+		gov->gdbs_data = NULL;
+	gov->exit(dbs_data);
+	kfree(dbs_data);
+
+free_policy_dbs_info:
+	free_policy_dbs_info(policy_dbs, gov);
+
+out:
+	mutex_unlock(&gov_dbs_data_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_init);
+
+void cpufreq_dbs_governor_exit(struct cpufreq_policy *policy)
+{
+	struct dbs_governor *gov = dbs_governor_of(policy);
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	unsigned int count;
+
+	/* Protect gov->gdbs_data against concurrent updates. */
+	mutex_lock(&gov_dbs_data_mutex);
+
+	count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list);
+
+	policy->governor_data = NULL;
+
+	if (!count) {
+		if (!have_governor_per_policy())
+			gov->gdbs_data = NULL;
+
+		gov->exit(dbs_data);
+		kfree(dbs_data);
+	}
+
+	free_policy_dbs_info(policy_dbs, gov);
+
+	mutex_unlock(&gov_dbs_data_mutex);
+}
+EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_exit);
+
+int cpufreq_dbs_governor_start(struct cpufreq_policy *policy)
+{
+	struct dbs_governor *gov = dbs_governor_of(policy);
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	unsigned int sampling_rate, ignore_nice, j;
+	unsigned int io_busy;
+
+	if (!policy->cur)
+		return -EINVAL;
+
+	policy_dbs->is_shared = policy_is_shared(policy);
+	policy_dbs->rate_mult = 1;
+
+	sampling_rate = dbs_data->sampling_rate;
+	ignore_nice = dbs_data->ignore_nice_load;
+	io_busy = dbs_data->io_is_busy;
+
+	for_each_cpu(j, policy->cpus) {
+		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
+
+		j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy);
+		/*
+		 * Make the first invocation of dbs_update() compute the load.
+		 */
+		j_cdbs->prev_load = 0;
+
+		if (ignore_nice)
+			j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+	}
+
+	gov->start(policy);
+
+	gov_set_update_util(policy_dbs, sampling_rate);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_start);
+
+void cpufreq_dbs_governor_stop(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+
+	gov_clear_update_util(policy_dbs->policy);
+	irq_work_sync(&policy_dbs->irq_work);
+	cancel_work_sync(&policy_dbs->work);
+	atomic_set(&policy_dbs->work_count, 0);
+	policy_dbs->work_in_progress = false;
+}
+EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_stop);
+
+void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs;
+
+	/* Protect gov->gdbs_data against cpufreq_dbs_governor_exit() */
+	mutex_lock(&gov_dbs_data_mutex);
+	policy_dbs = policy->governor_data;
+	if (!policy_dbs)
+		goto out;
+
+	mutex_lock(&policy_dbs->update_mutex);
+	cpufreq_policy_apply_limits(policy);
+	gov_update_sample_delay(policy_dbs, 0);
+	mutex_unlock(&policy_dbs->update_mutex);
+
+out:
+	mutex_unlock(&gov_dbs_data_mutex);
+}
+EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_limits);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.h b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.h
new file mode 100644
index 0000000..8463f5d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor.h
@@ -0,0 +1,185 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.h
+ *
+ * Header file for CPUFreq governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _CPUFREQ_GOVERNOR_H
+#define _CPUFREQ_GOVERNOR_H
+
+#include <linux/atomic.h>
+#include <linux/irq_work.h>
+#include <linux/cpufreq.h>
+#include <linux/sched/cpufreq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+/* Ondemand Sampling types */
+enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
+
+/*
+ * Abbreviations:
+ * dbs: used as a shortform for demand based switching It helps to keep variable
+ *	names smaller, simpler
+ * cdbs: common dbs
+ * od_*: On-demand governor
+ * cs_*: Conservative governor
+ */
+
+/* Governor demand based switching data (per-policy or global). */
+struct dbs_data {
+	struct gov_attr_set attr_set;
+	void *tuners;
+	unsigned int ignore_nice_load;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int io_is_busy;
+};
+
+static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set)
+{
+	return container_of(attr_set, struct dbs_data, attr_set);
+}
+
+#define gov_show_one(_gov, file_name)					\
+static ssize_t show_##file_name						\
+(struct gov_attr_set *attr_set, char *buf)				\
+{									\
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);		\
+	struct _gov##_dbs_tuners *tuners = dbs_data->tuners;		\
+	return sprintf(buf, "%u\n", tuners->file_name);			\
+}
+
+#define gov_show_one_common(file_name)					\
+static ssize_t show_##file_name						\
+(struct gov_attr_set *attr_set, char *buf)				\
+{									\
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);		\
+	return sprintf(buf, "%u\n", dbs_data->file_name);		\
+}
+
+#define gov_attr_ro(_name)						\
+static struct governor_attr _name =					\
+__ATTR(_name, 0444, show_##_name, NULL)
+
+#define gov_attr_rw(_name)						\
+static struct governor_attr _name =					\
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+/* Common to all CPUs of a policy */
+struct policy_dbs_info {
+	struct cpufreq_policy *policy;
+	/*
+	 * Per policy mutex that serializes load evaluation from limit-change
+	 * and work-handler.
+	 */
+	struct mutex update_mutex;
+
+	u64 last_sample_time;
+	s64 sample_delay_ns;
+	atomic_t work_count;
+	struct irq_work irq_work;
+	struct work_struct work;
+	/* dbs_data may be shared between multiple policy objects */
+	struct dbs_data *dbs_data;
+	struct list_head list;
+	/* Multiplier for increasing sample delay temporarily. */
+	unsigned int rate_mult;
+	unsigned int idle_periods;	/* For conservative */
+	/* Status indicators */
+	bool is_shared;		/* This object is used by multiple CPUs */
+	bool work_in_progress;	/* Work is being queued up or in progress */
+};
+
+static inline void gov_update_sample_delay(struct policy_dbs_info *policy_dbs,
+					   unsigned int delay_us)
+{
+	policy_dbs->sample_delay_ns = delay_us * NSEC_PER_USEC;
+}
+
+/* Per cpu structures */
+struct cpu_dbs_info {
+	u64 prev_cpu_idle;
+	u64 prev_update_time;
+	u64 prev_cpu_nice;
+	/*
+	 * Used to keep track of load in the previous interval. However, when
+	 * explicitly set to zero, it is used as a flag to ensure that we copy
+	 * the previous load to the current interval only once, upon the first
+	 * wake-up from idle.
+	 */
+	unsigned int prev_load;
+	struct update_util_data update_util;
+	struct policy_dbs_info *policy_dbs;
+};
+
+/* Common Governor data across policies */
+struct dbs_governor {
+	struct cpufreq_governor gov;
+	struct kobj_type kobj_type;
+
+	/*
+	 * Common data for platforms that don't set
+	 * CPUFREQ_HAVE_GOVERNOR_PER_POLICY
+	 */
+	struct dbs_data *gdbs_data;
+
+	unsigned int (*gov_dbs_update)(struct cpufreq_policy *policy);
+	struct policy_dbs_info *(*alloc)(void);
+	void (*free)(struct policy_dbs_info *policy_dbs);
+	int (*init)(struct dbs_data *dbs_data);
+	void (*exit)(struct dbs_data *dbs_data);
+	void (*start)(struct cpufreq_policy *policy);
+};
+
+static inline struct dbs_governor *dbs_governor_of(struct cpufreq_policy *policy)
+{
+	return container_of(policy->governor, struct dbs_governor, gov);
+}
+
+/* Governor callback routines */
+int cpufreq_dbs_governor_init(struct cpufreq_policy *policy);
+void cpufreq_dbs_governor_exit(struct cpufreq_policy *policy);
+int cpufreq_dbs_governor_start(struct cpufreq_policy *policy);
+void cpufreq_dbs_governor_stop(struct cpufreq_policy *policy);
+void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy);
+
+#define CPUFREQ_DBS_GOVERNOR_INITIALIZER(_name_)			\
+	{								\
+		.name = _name_,						\
+		.dynamic_switching = true,				\
+		.owner = THIS_MODULE,					\
+		.init = cpufreq_dbs_governor_init,			\
+		.exit = cpufreq_dbs_governor_exit,			\
+		.start = cpufreq_dbs_governor_start,			\
+		.stop = cpufreq_dbs_governor_stop,			\
+		.limits = cpufreq_dbs_governor_limits,			\
+	}
+
+/* Governor specific operations */
+struct od_ops {
+	unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
+			unsigned int freq_next, unsigned int relation);
+};
+
+unsigned int dbs_update(struct cpufreq_policy *policy);
+void od_register_powersave_bias_handler(unsigned int (*f)
+		(struct cpufreq_policy *, unsigned int, unsigned int),
+		unsigned int powersave_bias);
+void od_unregister_powersave_bias_handler(void);
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
+			    size_t count);
+void gov_update_cpu_data(struct dbs_data *dbs_data);
+#endif /* _CPUFREQ_GOVERNOR_H */
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor_attr_set.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor_attr_set.c
new file mode 100644
index 0000000..52841f8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_governor_attr_set.c
@@ -0,0 +1,84 @@
+/*
+ * Abstract code for CPUFreq governor tunable sysfs attributes.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cpufreq_governor.h"
+
+static inline struct gov_attr_set *to_gov_attr_set(struct kobject *kobj)
+{
+	return container_of(kobj, struct gov_attr_set, kobj);
+}
+
+static inline struct governor_attr *to_gov_attr(struct attribute *attr)
+{
+	return container_of(attr, struct governor_attr, attr);
+}
+
+static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
+			     char *buf)
+{
+	struct governor_attr *gattr = to_gov_attr(attr);
+
+	return gattr->show(to_gov_attr_set(kobj), buf);
+}
+
+static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct gov_attr_set *attr_set = to_gov_attr_set(kobj);
+	struct governor_attr *gattr = to_gov_attr(attr);
+	int ret;
+
+	mutex_lock(&attr_set->update_lock);
+	ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY;
+	mutex_unlock(&attr_set->update_lock);
+	return ret;
+}
+
+const struct sysfs_ops governor_sysfs_ops = {
+	.show	= governor_show,
+	.store	= governor_store,
+};
+EXPORT_SYMBOL_GPL(governor_sysfs_ops);
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	INIT_LIST_HEAD(&attr_set->policy_list);
+	mutex_init(&attr_set->update_lock);
+	attr_set->usage_count = 1;
+	list_add(list_node, &attr_set->policy_list);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_init);
+
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	mutex_lock(&attr_set->update_lock);
+	attr_set->usage_count++;
+	list_add(list_node, &attr_set->policy_list);
+	mutex_unlock(&attr_set->update_lock);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_get);
+
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	unsigned int count;
+
+	mutex_lock(&attr_set->update_lock);
+	list_del(list_node);
+	count = --attr_set->usage_count;
+	mutex_unlock(&attr_set->update_lock);
+	if (count)
+		return count;
+
+	kobject_put(&attr_set->kobj);
+	mutex_destroy(&attr_set->update_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_put);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.c
new file mode 100644
index 0000000..6b423ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.c
@@ -0,0 +1,493 @@
+/*
+ *  drivers/cpufreq/cpufreq_ondemand.c
+ *
+ *  Copyright (C)  2001 Russell King
+ *            (C)  2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *                      Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/percpu-defs.h>
+#include <linux/slab.h>
+#include <linux/tick.h>
+#include <linux/sched/cpufreq.h>
+
+#include "cpufreq_ondemand.h"
+
+/* On-demand governor macros */
+#define DEF_FREQUENCY_UP_THRESHOLD		(80)
+#define DEF_SAMPLING_DOWN_FACTOR		(1)
+#define MAX_SAMPLING_DOWN_FACTOR		(100000)
+#define MICRO_FREQUENCY_UP_THRESHOLD		(95)
+#define MICRO_FREQUENCY_MIN_SAMPLE_RATE		(10000)
+#define MIN_FREQUENCY_UP_THRESHOLD		(1)
+#define MAX_FREQUENCY_UP_THRESHOLD		(100)
+
+static struct od_ops od_ops;
+
+static unsigned int default_powersave_bias;
+
+/*
+ * Not all CPUs want IO time to be accounted as busy; this depends on how
+ * efficient idling at a higher frequency/voltage is.
+ * Pavel Machek says this is not so for various generations of AMD and old
+ * Intel systems.
+ * Mike Chan (android.com) claims this is also not true for ARM.
+ * Because of this, whitelist specific known (series) of CPUs by default, and
+ * leave all others up to the user.
+ */
+static int should_io_be_busy(void)
+{
+#if defined(CONFIG_X86)
+	/*
+	 * For Intel, Core 2 (model 15) and later have an efficient idle.
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+			boot_cpu_data.x86 == 6 &&
+			boot_cpu_data.x86_model >= 15)
+		return 1;
+#endif
+	return 0;
+}
+
+/*
+ * Find right freq to be set now with powersave_bias on.
+ * Returns the freq_hi to be used right now and will set freq_hi_delay_us,
+ * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs.
+ */
+static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy,
+		unsigned int freq_next, unsigned int relation)
+{
+	unsigned int freq_req, freq_reduc, freq_avg;
+	unsigned int freq_hi, freq_lo;
+	unsigned int index;
+	unsigned int delay_hi_us;
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs);
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct cpufreq_frequency_table *freq_table = policy->freq_table;
+
+	if (!freq_table) {
+		dbs_info->freq_lo = 0;
+		dbs_info->freq_lo_delay_us = 0;
+		return freq_next;
+	}
+
+	index = cpufreq_frequency_table_target(policy, freq_next, relation);
+	freq_req = freq_table[index].frequency;
+	freq_reduc = freq_req * od_tuners->powersave_bias / 1000;
+	freq_avg = freq_req - freq_reduc;
+
+	/* Find freq bounds for freq_avg in freq_table */
+	index = cpufreq_table_find_index_h(policy, freq_avg);
+	freq_lo = freq_table[index].frequency;
+	index = cpufreq_table_find_index_l(policy, freq_avg);
+	freq_hi = freq_table[index].frequency;
+
+	/* Find out how long we have to be in hi and lo freqs */
+	if (freq_hi == freq_lo) {
+		dbs_info->freq_lo = 0;
+		dbs_info->freq_lo_delay_us = 0;
+		return freq_lo;
+	}
+	delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate;
+	delay_hi_us += (freq_hi - freq_lo) / 2;
+	delay_hi_us /= freq_hi - freq_lo;
+	dbs_info->freq_hi_delay_us = delay_hi_us;
+	dbs_info->freq_lo = freq_lo;
+	dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us;
+	return freq_hi;
+}
+
+static void ondemand_powersave_bias_init(struct cpufreq_policy *policy)
+{
+	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data);
+
+	dbs_info->freq_lo = 0;
+}
+
+static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+
+	if (od_tuners->powersave_bias)
+		freq = od_ops.powersave_bias_target(policy, freq,
+				CPUFREQ_RELATION_H);
+	else if (policy->cur == policy->max)
+		return;
+
+	__cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ?
+			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency. Else, we adjust the frequency
+ * proportional to load.
+ */
+static void od_update(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs);
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	unsigned int load = dbs_update(policy);
+
+	dbs_info->freq_lo = 0;
+
+	/* Check for frequency increase */
+	if (load > dbs_data->up_threshold) {
+		/* If switching to max speed, apply sampling_down_factor */
+		if (policy->cur < policy->max)
+			policy_dbs->rate_mult = dbs_data->sampling_down_factor;
+		dbs_freq_increase(policy, policy->max);
+	} else {
+		/* Calculate the next frequency proportional to load */
+		unsigned int freq_next, min_f, max_f;
+
+		min_f = policy->cpuinfo.min_freq;
+		max_f = policy->cpuinfo.max_freq;
+		freq_next = min_f + load * (max_f - min_f) / 100;
+
+		/* No longer fully busy, reset rate_mult */
+		policy_dbs->rate_mult = 1;
+
+		if (od_tuners->powersave_bias)
+			freq_next = od_ops.powersave_bias_target(policy,
+								 freq_next,
+								 CPUFREQ_RELATION_L);
+
+		__cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_C);
+	}
+}
+
+static unsigned int od_dbs_update(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct dbs_data *dbs_data = policy_dbs->dbs_data;
+	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs);
+	int sample_type = dbs_info->sample_type;
+
+	/* Common NORMAL_SAMPLE setup */
+	dbs_info->sample_type = OD_NORMAL_SAMPLE;
+	/*
+	 * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore
+	 * it then.
+	 */
+	if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) {
+		__cpufreq_driver_target(policy, dbs_info->freq_lo,
+					CPUFREQ_RELATION_H);
+		return dbs_info->freq_lo_delay_us;
+	}
+
+	od_update(policy);
+
+	if (dbs_info->freq_lo) {
+		/* Setup SUB_SAMPLE */
+		dbs_info->sample_type = OD_SUB_SAMPLE;
+		return dbs_info->freq_hi_delay_us;
+	}
+
+	return dbs_data->sampling_rate * policy_dbs->rate_mult;
+}
+
+/************************** sysfs interface ************************/
+static struct dbs_governor od_dbs_gov;
+
+static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf,
+				size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+	dbs_data->io_is_busy = !!input;
+
+	/* we need to re-evaluate prev_cpu_idle */
+	gov_update_cpu_data(dbs_data);
+
+	return count;
+}
+
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+				  const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
+			input < MIN_FREQUENCY_UP_THRESHOLD) {
+		return -EINVAL;
+	}
+
+	dbs_data->up_threshold = input;
+	return count;
+}
+
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+					  const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct policy_dbs_info *policy_dbs;
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
+		return -EINVAL;
+
+	dbs_data->sampling_down_factor = input;
+
+	/* Reset down sampling multiplier in case it was active */
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
+		/*
+		 * Doing this without locking might lead to using different
+		 * rate_mult values in od_update() and od_dbs_update().
+		 */
+		mutex_lock(&policy_dbs->update_mutex);
+		policy_dbs->rate_mult = 1;
+		mutex_unlock(&policy_dbs->update_mutex);
+	}
+
+	return count;
+}
+
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+				      const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+
+	if (input > 1)
+		input = 1;
+
+	if (input == dbs_data->ignore_nice_load) { /* nothing to do */
+		return count;
+	}
+	dbs_data->ignore_nice_load = input;
+
+	/* we need to re-evaluate prev_cpu_idle */
+	gov_update_cpu_data(dbs_data);
+
+	return count;
+}
+
+static ssize_t store_powersave_bias(struct gov_attr_set *attr_set,
+				    const char *buf, size_t count)
+{
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct policy_dbs_info *policy_dbs;
+	unsigned int input;
+	int ret;
+	ret = sscanf(buf, "%u", &input);
+
+	if (ret != 1)
+		return -EINVAL;
+
+	if (input > 1000)
+		input = 1000;
+
+	od_tuners->powersave_bias = input;
+
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list)
+		ondemand_powersave_bias_init(policy_dbs->policy);
+
+	return count;
+}
+
+gov_show_one_common(sampling_rate);
+gov_show_one_common(up_threshold);
+gov_show_one_common(sampling_down_factor);
+gov_show_one_common(ignore_nice_load);
+gov_show_one_common(io_is_busy);
+gov_show_one(od, powersave_bias);
+
+gov_attr_rw(sampling_rate);
+gov_attr_rw(io_is_busy);
+gov_attr_rw(up_threshold);
+gov_attr_rw(sampling_down_factor);
+gov_attr_rw(ignore_nice_load);
+gov_attr_rw(powersave_bias);
+
+static struct attribute *od_attributes[] = {
+	&sampling_rate.attr,
+	&up_threshold.attr,
+	&sampling_down_factor.attr,
+	&ignore_nice_load.attr,
+	&powersave_bias.attr,
+	&io_is_busy.attr,
+	NULL
+};
+
+/************************** sysfs end ************************/
+
+static struct policy_dbs_info *od_alloc(void)
+{
+	struct od_policy_dbs_info *dbs_info;
+
+	dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL);
+	return dbs_info ? &dbs_info->policy_dbs : NULL;
+}
+
+static void od_free(struct policy_dbs_info *policy_dbs)
+{
+	kfree(to_dbs_info(policy_dbs));
+}
+
+static int od_init(struct dbs_data *dbs_data)
+{
+	struct od_dbs_tuners *tuners;
+	u64 idle_time;
+	int cpu;
+
+	tuners = kzalloc(sizeof(*tuners), GFP_KERNEL);
+	if (!tuners)
+		return -ENOMEM;
+
+	cpu = get_cpu();
+	idle_time = get_cpu_idle_time_us(cpu, NULL);
+	put_cpu();
+	if (idle_time != -1ULL) {
+		/* Idle micro accounting is supported. Use finer thresholds */
+		dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
+	} else {
+		dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
+	}
+
+	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
+	dbs_data->ignore_nice_load = 0;
+	tuners->powersave_bias = default_powersave_bias;
+	dbs_data->io_is_busy = should_io_be_busy();
+
+	dbs_data->tuners = tuners;
+	return 0;
+}
+
+static void od_exit(struct dbs_data *dbs_data)
+{
+	kfree(dbs_data->tuners);
+}
+
+static void od_start(struct cpufreq_policy *policy)
+{
+	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data);
+
+	dbs_info->sample_type = OD_NORMAL_SAMPLE;
+	ondemand_powersave_bias_init(policy);
+}
+
+static struct od_ops od_ops = {
+	.powersave_bias_target = generic_powersave_bias_target,
+};
+
+static struct dbs_governor od_dbs_gov = {
+	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"),
+	.kobj_type = { .default_attrs = od_attributes },
+	.gov_dbs_update = od_dbs_update,
+	.alloc = od_alloc,
+	.free = od_free,
+	.init = od_init,
+	.exit = od_exit,
+	.start = od_start,
+};
+
+#define CPU_FREQ_GOV_ONDEMAND	(&od_dbs_gov.gov)
+
+static void od_set_powersave_bias(unsigned int powersave_bias)
+{
+	unsigned int cpu;
+	cpumask_t done;
+
+	default_powersave_bias = powersave_bias;
+	cpumask_clear(&done);
+
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		struct cpufreq_policy *policy;
+		struct policy_dbs_info *policy_dbs;
+		struct dbs_data *dbs_data;
+		struct od_dbs_tuners *od_tuners;
+
+		if (cpumask_test_cpu(cpu, &done))
+			continue;
+
+		policy = cpufreq_cpu_get_raw(cpu);
+		if (!policy || policy->governor != CPU_FREQ_GOV_ONDEMAND)
+			continue;
+
+		policy_dbs = policy->governor_data;
+		if (!policy_dbs)
+			continue;
+
+		cpumask_or(&done, &done, policy->cpus);
+
+		dbs_data = policy_dbs->dbs_data;
+		od_tuners = dbs_data->tuners;
+		od_tuners->powersave_bias = default_powersave_bias;
+	}
+	put_online_cpus();
+}
+
+void od_register_powersave_bias_handler(unsigned int (*f)
+		(struct cpufreq_policy *, unsigned int, unsigned int),
+		unsigned int powersave_bias)
+{
+	od_ops.powersave_bias_target = f;
+	od_set_powersave_bias(powersave_bias);
+}
+EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler);
+
+void od_unregister_powersave_bias_handler(void)
+{
+	od_ops.powersave_bias_target = generic_powersave_bias_target;
+	od_set_powersave_bias(0);
+}
+EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler);
+
+static int __init cpufreq_gov_dbs_init(void)
+{
+	return cpufreq_register_governor(CPU_FREQ_GOV_ONDEMAND);
+}
+
+static void __exit cpufreq_gov_dbs_exit(void)
+{
+	cpufreq_unregister_governor(CPU_FREQ_GOV_ONDEMAND);
+}
+
+MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
+MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>");
+MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
+	"Low Latency Frequency Transition capable processors");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return CPU_FREQ_GOV_ONDEMAND;
+}
+
+fs_initcall(cpufreq_gov_dbs_init);
+#else
+module_init(cpufreq_gov_dbs_init);
+#endif
+module_exit(cpufreq_gov_dbs_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.h b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.h
new file mode 100644
index 0000000..640ea4e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_ondemand.h
@@ -0,0 +1,29 @@
+/*
+ * Header file for CPUFreq ondemand governor and related code.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cpufreq_governor.h"
+
+struct od_policy_dbs_info {
+	struct policy_dbs_info policy_dbs;
+	unsigned int freq_lo;
+	unsigned int freq_lo_delay_us;
+	unsigned int freq_hi_delay_us;
+	unsigned int sample_type:1;
+};
+
+static inline struct od_policy_dbs_info *to_dbs_info(struct policy_dbs_info *policy_dbs)
+{
+	return container_of(policy_dbs, struct od_policy_dbs_info, policy_dbs);
+}
+
+struct od_dbs_tuners {
+	unsigned int powersave_bias;
+};
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_performance.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_performance.c
new file mode 100644
index 0000000..dafb679
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_performance.c
@@ -0,0 +1,59 @@
+/*
+ *  linux/drivers/cpufreq/cpufreq_performance.c
+ *
+ *  Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+static void cpufreq_gov_performance_limits(struct cpufreq_policy *policy)
+{
+	pr_debug("setting to %u kHz\n", policy->max);
+	__cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
+}
+
+static struct cpufreq_governor cpufreq_gov_performance = {
+	.name		= "performance",
+	.owner		= THIS_MODULE,
+	.limits		= cpufreq_gov_performance_limits,
+};
+
+static int __init cpufreq_gov_performance_init(void)
+{
+	return cpufreq_register_governor(&cpufreq_gov_performance);
+}
+
+static void __exit cpufreq_gov_performance_exit(void)
+{
+	cpufreq_unregister_governor(&cpufreq_gov_performance);
+}
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return &cpufreq_gov_performance;
+}
+#endif
+#ifndef CONFIG_CPU_FREQ_GOV_PERFORMANCE_MODULE
+struct cpufreq_governor *cpufreq_fallback_governor(void)
+{
+	return &cpufreq_gov_performance;
+}
+#endif
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
+MODULE_LICENSE("GPL");
+
+fs_initcall(cpufreq_gov_performance_init);
+module_exit(cpufreq_gov_performance_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_powersave.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_powersave.c
new file mode 100644
index 0000000..78a6510
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_powersave.c
@@ -0,0 +1,55 @@
+/*
+ * linux/drivers/cpufreq/cpufreq_powersave.c
+ *
+ * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+static void cpufreq_gov_powersave_limits(struct cpufreq_policy *policy)
+{
+	pr_debug("setting to %u kHz\n", policy->min);
+	__cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
+}
+
+static struct cpufreq_governor cpufreq_gov_powersave = {
+	.name		= "powersave",
+	.limits		= cpufreq_gov_powersave_limits,
+	.owner		= THIS_MODULE,
+};
+
+static int __init cpufreq_gov_powersave_init(void)
+{
+	return cpufreq_register_governor(&cpufreq_gov_powersave);
+}
+
+static void __exit cpufreq_gov_powersave_exit(void)
+{
+	cpufreq_unregister_governor(&cpufreq_gov_powersave);
+}
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return &cpufreq_gov_powersave;
+}
+
+fs_initcall(cpufreq_gov_powersave_init);
+#else
+module_init(cpufreq_gov_powersave_init);
+#endif
+module_exit(cpufreq_gov_powersave_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_stats.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_stats.c
new file mode 100644
index 0000000..e75880e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_stats.c
@@ -0,0 +1,246 @@
+/*
+ *  drivers/cpufreq/cpufreq_stats.c
+ *
+ *  Copyright (C) 2003-2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *  (C) 2004 Zou Nan hai <nanhai.zou@intel.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+static DEFINE_SPINLOCK(cpufreq_stats_lock);
+
+struct cpufreq_stats {
+	unsigned int total_trans;
+	unsigned long long last_time;
+	unsigned int max_state;
+	unsigned int state_num;
+	unsigned int last_index;
+	u64 *time_in_state;
+	unsigned int *freq_table;
+	unsigned int *trans_table;
+};
+
+static int cpufreq_stats_update(struct cpufreq_stats *stats)
+{
+	unsigned long long cur_time = get_jiffies_64();
+
+	spin_lock(&cpufreq_stats_lock);
+	stats->time_in_state[stats->last_index] += cur_time - stats->last_time;
+	stats->last_time = cur_time;
+	spin_unlock(&cpufreq_stats_lock);
+	return 0;
+}
+
+static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
+{
+	unsigned int count = stats->max_state;
+
+	memset(stats->time_in_state, 0, count * sizeof(u64));
+	memset(stats->trans_table, 0, count * count * sizeof(int));
+	stats->last_time = get_jiffies_64();
+	stats->total_trans = 0;
+}
+
+static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%d\n", policy->stats->total_trans);
+}
+
+static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf)
+{
+	struct cpufreq_stats *stats = policy->stats;
+	ssize_t len = 0;
+	int i;
+
+	if (policy->fast_switch_enabled)
+		return 0;
+
+	cpufreq_stats_update(stats);
+	for (i = 0; i < stats->state_num; i++) {
+		len += sprintf(buf + len, "%u %llu\n", stats->freq_table[i],
+			(unsigned long long)
+			jiffies_64_to_clock_t(stats->time_in_state[i]));
+	}
+	return len;
+}
+
+static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
+			   size_t count)
+{
+	/* We don't care what is written to the attribute. */
+	cpufreq_stats_clear_table(policy->stats);
+	return count;
+}
+
+static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
+{
+	struct cpufreq_stats *stats = policy->stats;
+	ssize_t len = 0;
+	int i, j;
+
+	if (policy->fast_switch_enabled)
+		return 0;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, "   From  :    To\n");
+	len += snprintf(buf + len, PAGE_SIZE - len, "         : ");
+	for (i = 0; i < stats->state_num; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
+				stats->freq_table[i]);
+	}
+	if (len >= PAGE_SIZE)
+		return PAGE_SIZE;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+	for (i = 0; i < stats->state_num; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+
+		len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ",
+				stats->freq_table[i]);
+
+		for (j = 0; j < stats->state_num; j++) {
+			if (len >= PAGE_SIZE)
+				break;
+			len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
+					stats->trans_table[i*stats->max_state+j]);
+		}
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+	}
+	if (len >= PAGE_SIZE)
+		return PAGE_SIZE;
+	return len;
+}
+cpufreq_freq_attr_ro(trans_table);
+
+cpufreq_freq_attr_ro(total_trans);
+cpufreq_freq_attr_ro(time_in_state);
+cpufreq_freq_attr_wo(reset);
+
+static struct attribute *default_attrs[] = {
+	&total_trans.attr,
+	&time_in_state.attr,
+	&reset.attr,
+	&trans_table.attr,
+	NULL
+};
+static const struct attribute_group stats_attr_group = {
+	.attrs = default_attrs,
+	.name = "stats"
+};
+
+static int freq_table_get_index(struct cpufreq_stats *stats, unsigned int freq)
+{
+	int index;
+	for (index = 0; index < stats->max_state; index++)
+		if (stats->freq_table[index] == freq)
+			return index;
+	return -1;
+}
+
+void cpufreq_stats_free_table(struct cpufreq_policy *policy)
+{
+	struct cpufreq_stats *stats = policy->stats;
+
+	/* Already freed */
+	if (!stats)
+		return;
+
+	pr_debug("%s: Free stats table\n", __func__);
+
+	sysfs_remove_group(&policy->kobj, &stats_attr_group);
+	kfree(stats->time_in_state);
+	kfree(stats);
+	policy->stats = NULL;
+}
+
+void cpufreq_stats_create_table(struct cpufreq_policy *policy)
+{
+	unsigned int i = 0, count = 0, ret = -ENOMEM;
+	struct cpufreq_stats *stats;
+	unsigned int alloc_size;
+	struct cpufreq_frequency_table *pos;
+
+	count = cpufreq_table_count_valid_entries(policy);
+	if (!count)
+		return;
+
+	/* stats already initialized */
+	if (policy->stats)
+		return;
+
+	stats = kzalloc(sizeof(*stats), GFP_KERNEL);
+	if (!stats)
+		return;
+
+	alloc_size = count * sizeof(int) + count * sizeof(u64);
+
+	alloc_size += count * count * sizeof(int);
+
+	/* Allocate memory for time_in_state/freq_table/trans_table in one go */
+	stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
+	if (!stats->time_in_state)
+		goto free_stat;
+
+	stats->freq_table = (unsigned int *)(stats->time_in_state + count);
+
+	stats->trans_table = stats->freq_table + count;
+
+	stats->max_state = count;
+
+	/* Find valid-unique entries */
+	cpufreq_for_each_valid_entry(pos, policy->freq_table)
+		if (freq_table_get_index(stats, pos->frequency) == -1)
+			stats->freq_table[i++] = pos->frequency;
+
+	stats->state_num = i;
+	stats->last_time = get_jiffies_64();
+	stats->last_index = freq_table_get_index(stats, policy->cur);
+
+	policy->stats = stats;
+	ret = sysfs_create_group(&policy->kobj, &stats_attr_group);
+	if (!ret)
+		return;
+
+	/* We failed, release resources */
+	policy->stats = NULL;
+	kfree(stats->time_in_state);
+free_stat:
+	kfree(stats);
+}
+
+void cpufreq_stats_record_transition(struct cpufreq_policy *policy,
+				     unsigned int new_freq)
+{
+	struct cpufreq_stats *stats = policy->stats;
+	int old_index, new_index;
+
+	if (!stats) {
+		pr_debug("%s: No stats found\n", __func__);
+		return;
+	}
+
+	old_index = stats->last_index;
+	new_index = freq_table_get_index(stats, new_freq);
+
+	/* We can't do stats->time_in_state[-1]= .. */
+	if (old_index == -1 || new_index == -1 || old_index == new_index)
+		return;
+
+	cpufreq_stats_update(stats);
+
+	stats->last_index = new_index;
+	stats->trans_table[old_index * stats->max_state + new_index]++;
+	stats->total_trans++;
+}
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_times.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_times.c
new file mode 100644
index 0000000..a43eeee
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_times.c
@@ -0,0 +1,464 @@
+/* drivers/cpufreq/cpufreq_times.c
+ *
+ * Copyright (C) 2018 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/cpufreq_times.h>
+#include <linux/hashtable.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+
+#define UID_HASH_BITS 10
+
+static DECLARE_HASHTABLE(uid_hash_table, UID_HASH_BITS);
+
+static DEFINE_SPINLOCK(task_time_in_state_lock); /* task->time_in_state */
+static DEFINE_SPINLOCK(uid_lock); /* uid_hash_table */
+
+struct uid_entry {
+	uid_t uid;
+	unsigned int max_state;
+	struct hlist_node hash;
+	struct rcu_head rcu;
+	u64 time_in_state[0];
+};
+
+/**
+ * struct cpu_freqs - per-cpu frequency information
+ * @offset: start of these freqs' stats in task time_in_state array
+ * @max_state: number of entries in freq_table
+ * @last_index: index in freq_table of last frequency switched to
+ * @freq_table: list of available frequencies
+ */
+struct cpu_freqs {
+	unsigned int offset;
+	unsigned int max_state;
+	unsigned int last_index;
+	unsigned int freq_table[0];
+};
+
+static struct cpu_freqs *all_freqs[NR_CPUS];
+
+static unsigned int next_offset;
+
+
+/* Caller must hold rcu_read_lock() */
+static struct uid_entry *find_uid_entry_rcu(uid_t uid)
+{
+	struct uid_entry *uid_entry;
+
+	hash_for_each_possible_rcu(uid_hash_table, uid_entry, hash, uid) {
+		if (uid_entry->uid == uid)
+			return uid_entry;
+	}
+	return NULL;
+}
+
+/* Caller must hold uid lock */
+static struct uid_entry *find_uid_entry_locked(uid_t uid)
+{
+	struct uid_entry *uid_entry;
+
+	hash_for_each_possible(uid_hash_table, uid_entry, hash, uid) {
+		if (uid_entry->uid == uid)
+			return uid_entry;
+	}
+	return NULL;
+}
+
+/* Caller must hold uid lock */
+static struct uid_entry *find_or_register_uid_locked(uid_t uid)
+{
+	struct uid_entry *uid_entry, *temp;
+	unsigned int max_state = READ_ONCE(next_offset);
+	size_t alloc_size = sizeof(*uid_entry) + max_state *
+		sizeof(uid_entry->time_in_state[0]);
+
+	uid_entry = find_uid_entry_locked(uid);
+	if (uid_entry) {
+		if (uid_entry->max_state == max_state)
+			return uid_entry;
+		/* uid_entry->time_in_state is too small to track all freqs, so
+		 * expand it.
+		 */
+		temp = __krealloc(uid_entry, alloc_size, GFP_ATOMIC);
+		if (!temp)
+			return uid_entry;
+		temp->max_state = max_state;
+		memset(temp->time_in_state + uid_entry->max_state, 0,
+		       (max_state - uid_entry->max_state) *
+		       sizeof(uid_entry->time_in_state[0]));
+		if (temp != uid_entry) {
+			hlist_replace_rcu(&uid_entry->hash, &temp->hash);
+			kfree_rcu(uid_entry, rcu);
+		}
+		return temp;
+	}
+
+	uid_entry = kzalloc(alloc_size, GFP_ATOMIC);
+	if (!uid_entry)
+		return NULL;
+
+	uid_entry->uid = uid;
+	uid_entry->max_state = max_state;
+
+	hash_add_rcu(uid_hash_table, &uid_entry->hash, uid);
+
+	return uid_entry;
+}
+
+static bool freq_index_invalid(unsigned int index)
+{
+	unsigned int cpu;
+	struct cpu_freqs *freqs;
+
+	for_each_possible_cpu(cpu) {
+		freqs = all_freqs[cpu];
+		if (!freqs || index < freqs->offset ||
+		    freqs->offset + freqs->max_state <= index)
+			continue;
+		return freqs->freq_table[index - freqs->offset] ==
+			CPUFREQ_ENTRY_INVALID;
+	}
+	return true;
+}
+
+static int single_uid_time_in_state_show(struct seq_file *m, void *ptr)
+{
+	struct uid_entry *uid_entry;
+	unsigned int i;
+	u64 time;
+	uid_t uid = from_kuid_munged(current_user_ns(), *(kuid_t *)m->private);
+
+	if (uid == overflowuid)
+		return -EINVAL;
+
+	rcu_read_lock();
+
+	uid_entry = find_uid_entry_rcu(uid);
+	if (!uid_entry) {
+		rcu_read_unlock();
+		return 0;
+	}
+
+	for (i = 0; i < uid_entry->max_state; ++i) {
+		if (freq_index_invalid(i))
+			continue;
+		time = nsec_to_clock_t(uid_entry->time_in_state[i]);
+		seq_write(m, &time, sizeof(time));
+	}
+
+	rcu_read_unlock();
+
+	return 0;
+}
+
+static void *uid_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	if (*pos >= HASH_SIZE(uid_hash_table))
+		return NULL;
+
+	return &uid_hash_table[*pos];
+}
+
+static void *uid_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	(*pos)++;
+
+	if (*pos >= HASH_SIZE(uid_hash_table))
+		return NULL;
+
+	return &uid_hash_table[*pos];
+}
+
+static void uid_seq_stop(struct seq_file *seq, void *v) { }
+
+static int uid_time_in_state_seq_show(struct seq_file *m, void *v)
+{
+	struct uid_entry *uid_entry;
+	struct cpu_freqs *freqs, *last_freqs = NULL;
+	int i, cpu;
+
+	if (v == uid_hash_table) {
+		seq_puts(m, "uid:");
+		for_each_possible_cpu(cpu) {
+			freqs = all_freqs[cpu];
+			if (!freqs || freqs == last_freqs)
+				continue;
+			last_freqs = freqs;
+			for (i = 0; i < freqs->max_state; i++) {
+				if (freqs->freq_table[i] ==
+				    CPUFREQ_ENTRY_INVALID)
+					continue;
+				seq_printf(m, " %d", freqs->freq_table[i]);
+			}
+		}
+		seq_putc(m, '\n');
+	}
+
+	rcu_read_lock();
+
+	hlist_for_each_entry_rcu(uid_entry, (struct hlist_head *)v, hash) {
+		if (uid_entry->max_state)
+			seq_printf(m, "%d:", uid_entry->uid);
+		for (i = 0; i < uid_entry->max_state; ++i) {
+			if (freq_index_invalid(i))
+				continue;
+			seq_printf(m, " %lu", (unsigned long)nsec_to_clock_t(
+					   uid_entry->time_in_state[i]));
+		}
+		if (uid_entry->max_state)
+			seq_putc(m, '\n');
+	}
+
+	rcu_read_unlock();
+	return 0;
+}
+
+void cpufreq_task_times_init(struct task_struct *p)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&task_time_in_state_lock, flags);
+	p->time_in_state = NULL;
+	spin_unlock_irqrestore(&task_time_in_state_lock, flags);
+	p->max_state = 0;
+}
+
+void cpufreq_task_times_alloc(struct task_struct *p)
+{
+	void *temp;
+	unsigned long flags;
+	unsigned int max_state = READ_ONCE(next_offset);
+
+	/* We use one array to avoid multiple allocs per task */
+	temp = kcalloc(max_state, sizeof(p->time_in_state[0]), GFP_ATOMIC);
+	if (!temp)
+		return;
+
+	spin_lock_irqsave(&task_time_in_state_lock, flags);
+	p->time_in_state = temp;
+	spin_unlock_irqrestore(&task_time_in_state_lock, flags);
+	p->max_state = max_state;
+}
+
+/* Caller must hold task_time_in_state_lock */
+static int cpufreq_task_times_realloc_locked(struct task_struct *p)
+{
+	void *temp;
+	unsigned int max_state = READ_ONCE(next_offset);
+
+	temp = krealloc(p->time_in_state, max_state * sizeof(u64), GFP_ATOMIC);
+	if (!temp)
+		return -ENOMEM;
+	p->time_in_state = temp;
+	memset(p->time_in_state + p->max_state, 0,
+	       (max_state - p->max_state) * sizeof(u64));
+	p->max_state = max_state;
+	return 0;
+}
+
+void cpufreq_task_times_exit(struct task_struct *p)
+{
+	unsigned long flags;
+	void *temp;
+
+	if (!p->time_in_state)
+		return;
+
+	spin_lock_irqsave(&task_time_in_state_lock, flags);
+	temp = p->time_in_state;
+	p->time_in_state = NULL;
+	spin_unlock_irqrestore(&task_time_in_state_lock, flags);
+	kfree(temp);
+}
+
+int proc_time_in_state_show(struct seq_file *m, struct pid_namespace *ns,
+	struct pid *pid, struct task_struct *p)
+{
+	unsigned int cpu, i;
+	u64 cputime;
+	unsigned long flags;
+	struct cpu_freqs *freqs;
+	struct cpu_freqs *last_freqs = NULL;
+
+	spin_lock_irqsave(&task_time_in_state_lock, flags);
+	for_each_possible_cpu(cpu) {
+		freqs = all_freqs[cpu];
+		if (!freqs || freqs == last_freqs)
+			continue;
+		last_freqs = freqs;
+
+		seq_printf(m, "cpu%u\n", cpu);
+		for (i = 0; i < freqs->max_state; i++) {
+			if (freqs->freq_table[i] == CPUFREQ_ENTRY_INVALID)
+				continue;
+			cputime = 0;
+			if (freqs->offset + i < p->max_state &&
+			    p->time_in_state)
+				cputime = p->time_in_state[freqs->offset + i];
+			seq_printf(m, "%u %lu\n", freqs->freq_table[i],
+				   (unsigned long)nsec_to_clock_t(cputime));
+		}
+	}
+	spin_unlock_irqrestore(&task_time_in_state_lock, flags);
+	return 0;
+}
+
+void cpufreq_acct_update_power(struct task_struct *p, u64 cputime)
+{
+	unsigned long flags;
+	unsigned int state;
+	struct uid_entry *uid_entry;
+	struct cpu_freqs *freqs = all_freqs[task_cpu(p)];
+	uid_t uid = from_kuid_munged(current_user_ns(), task_uid(p));
+
+	if (!freqs || p->flags & PF_EXITING)
+		return;
+
+	state = freqs->offset + READ_ONCE(freqs->last_index);
+
+	spin_lock_irqsave(&task_time_in_state_lock, flags);
+	if ((state < p->max_state || !cpufreq_task_times_realloc_locked(p)) &&
+	    p->time_in_state)
+		p->time_in_state[state] += cputime;
+	spin_unlock_irqrestore(&task_time_in_state_lock, flags);
+
+	spin_lock_irqsave(&uid_lock, flags);
+	uid_entry = find_or_register_uid_locked(uid);
+	if (uid_entry && state < uid_entry->max_state)
+		uid_entry->time_in_state[state] += cputime;
+	spin_unlock_irqrestore(&uid_lock, flags);
+}
+
+void cpufreq_times_create_policy(struct cpufreq_policy *policy)
+{
+	int cpu, index;
+	unsigned int count = 0;
+	struct cpufreq_frequency_table *pos, *table;
+	struct cpu_freqs *freqs;
+	void *tmp;
+
+	if (all_freqs[policy->cpu])
+		return;
+
+	table = policy->freq_table;
+	if (!table)
+		return;
+
+	cpufreq_for_each_entry(pos, table)
+		count++;
+
+	tmp =  kzalloc(sizeof(*freqs) + sizeof(freqs->freq_table[0]) * count,
+		       GFP_KERNEL);
+	if (!tmp)
+		return;
+
+	freqs = tmp;
+	freqs->max_state = count;
+
+	index = cpufreq_frequency_table_get_index(policy, policy->cur);
+	if (index >= 0)
+		WRITE_ONCE(freqs->last_index, index);
+
+	cpufreq_for_each_entry(pos, table)
+		freqs->freq_table[pos - table] = pos->frequency;
+
+	freqs->offset = next_offset;
+	WRITE_ONCE(next_offset, freqs->offset + count);
+	for_each_cpu(cpu, policy->related_cpus)
+		all_freqs[cpu] = freqs;
+}
+
+void cpufreq_task_times_remove_uids(uid_t uid_start, uid_t uid_end)
+{
+	struct uid_entry *uid_entry;
+	struct hlist_node *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uid_lock, flags);
+
+	for (; uid_start <= uid_end; uid_start++) {
+		hash_for_each_possible_safe(uid_hash_table, uid_entry, tmp,
+			hash, uid_start) {
+			if (uid_start == uid_entry->uid) {
+				hash_del_rcu(&uid_entry->hash);
+				kfree_rcu(uid_entry, rcu);
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&uid_lock, flags);
+}
+
+void cpufreq_times_record_transition(struct cpufreq_freqs *freq)
+{
+	int index;
+	struct cpu_freqs *freqs = all_freqs[freq->cpu];
+	struct cpufreq_policy *policy;
+
+	if (!freqs)
+		return;
+
+	policy = cpufreq_cpu_get(freq->cpu);
+	if (!policy)
+		return;
+
+	index = cpufreq_frequency_table_get_index(policy, freq->new);
+	if (index >= 0)
+		WRITE_ONCE(freqs->last_index, index);
+
+	cpufreq_cpu_put(policy);
+}
+
+static const struct seq_operations uid_time_in_state_seq_ops = {
+	.start = uid_seq_start,
+	.next = uid_seq_next,
+	.stop = uid_seq_stop,
+	.show = uid_time_in_state_seq_show,
+};
+
+static int uid_time_in_state_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &uid_time_in_state_seq_ops);
+}
+
+int single_uid_time_in_state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, single_uid_time_in_state_show,
+			&(inode->i_uid));
+}
+
+static const struct file_operations uid_time_in_state_fops = {
+	.open		= uid_time_in_state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init cpufreq_times_init(void)
+{
+	proc_create_data("uid_time_in_state", 0444, NULL,
+			 &uid_time_in_state_fops, NULL);
+
+	return 0;
+}
+
+early_initcall(cpufreq_times_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_userspace.c b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_userspace.c
new file mode 100644
index 0000000..bd897e3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cpufreq_userspace.c
@@ -0,0 +1,158 @@
+
+/*
+ *  linux/drivers/cpufreq/cpufreq_userspace.c
+ *
+ *  Copyright (C)  2001 Russell King
+ *            (C)  2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
+static DEFINE_MUTEX(userspace_mutex);
+
+/**
+ * cpufreq_set - set the CPU frequency
+ * @policy: pointer to policy struct where freq is being set
+ * @freq: target frequency in kHz
+ *
+ * Sets the CPU frequency to freq.
+ */
+static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
+{
+	int ret = -EINVAL;
+	unsigned int *setspeed = policy->governor_data;
+
+	pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
+
+	mutex_lock(&userspace_mutex);
+	if (!per_cpu(cpu_is_managed, policy->cpu))
+		goto err;
+
+	*setspeed = freq;
+
+	ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
+ err:
+	mutex_unlock(&userspace_mutex);
+	return ret;
+}
+
+static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%u\n", policy->cur);
+}
+
+static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy)
+{
+	unsigned int *setspeed;
+
+	setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL);
+	if (!setspeed)
+		return -ENOMEM;
+
+	policy->governor_data = setspeed;
+	return 0;
+}
+
+static void cpufreq_userspace_policy_exit(struct cpufreq_policy *policy)
+{
+	mutex_lock(&userspace_mutex);
+	kfree(policy->governor_data);
+	policy->governor_data = NULL;
+	mutex_unlock(&userspace_mutex);
+}
+
+static int cpufreq_userspace_policy_start(struct cpufreq_policy *policy)
+{
+	unsigned int *setspeed = policy->governor_data;
+
+	BUG_ON(!policy->cur);
+	pr_debug("started managing cpu %u\n", policy->cpu);
+
+	mutex_lock(&userspace_mutex);
+	per_cpu(cpu_is_managed, policy->cpu) = 1;
+	*setspeed = policy->cur;
+	mutex_unlock(&userspace_mutex);
+	return 0;
+}
+
+static void cpufreq_userspace_policy_stop(struct cpufreq_policy *policy)
+{
+	unsigned int *setspeed = policy->governor_data;
+
+	pr_debug("managing cpu %u stopped\n", policy->cpu);
+
+	mutex_lock(&userspace_mutex);
+	per_cpu(cpu_is_managed, policy->cpu) = 0;
+	*setspeed = 0;
+	mutex_unlock(&userspace_mutex);
+}
+
+static void cpufreq_userspace_policy_limits(struct cpufreq_policy *policy)
+{
+	unsigned int *setspeed = policy->governor_data;
+
+	mutex_lock(&userspace_mutex);
+
+	pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n",
+		 policy->cpu, policy->min, policy->max, policy->cur, *setspeed);
+
+	if (policy->max < *setspeed)
+		__cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
+	else if (policy->min > *setspeed)
+		__cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
+	else
+		__cpufreq_driver_target(policy, *setspeed, CPUFREQ_RELATION_L);
+
+	mutex_unlock(&userspace_mutex);
+}
+
+static struct cpufreq_governor cpufreq_gov_userspace = {
+	.name		= "userspace",
+	.init		= cpufreq_userspace_policy_init,
+	.exit		= cpufreq_userspace_policy_exit,
+	.start		= cpufreq_userspace_policy_start,
+	.stop		= cpufreq_userspace_policy_stop,
+	.limits		= cpufreq_userspace_policy_limits,
+	.store_setspeed	= cpufreq_set,
+	.show_setspeed	= show_speed,
+	.owner		= THIS_MODULE,
+};
+
+static int __init cpufreq_gov_userspace_init(void)
+{
+	return cpufreq_register_governor(&cpufreq_gov_userspace);
+}
+
+static void __exit cpufreq_gov_userspace_exit(void)
+{
+	cpufreq_unregister_governor(&cpufreq_gov_userspace);
+}
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, "
+		"Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return &cpufreq_gov_userspace;
+}
+
+fs_initcall(cpufreq_gov_userspace_init);
+#else
+module_init(cpufreq_gov_userspace_init);
+#endif
+module_exit(cpufreq_gov_userspace_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cris-artpec3-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/cris-artpec3-cpufreq.c
new file mode 100644
index 0000000..455b4fb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cris-artpec3-cpufreq.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/clkgen_defs.h>
+#include <hwregs/ddr2_defs.h>
+
+static int
+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
+	void *data);
+
+static struct notifier_block cris_sdram_freq_notifier_block = {
+	.notifier_call = cris_sdram_freq_notifier
+};
+
+static struct cpufreq_frequency_table cris_freq_table[] = {
+	{0, 0x01, 6000},
+	{0, 0x02, 200000},
+	{0, 0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
+{
+	reg_clkgen_rw_clk_ctrl clk_ctrl;
+	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+	return clk_ctrl.pll ? 200000 : 6000;
+}
+
+static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
+{
+	reg_clkgen_rw_clk_ctrl clk_ctrl;
+	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+
+	local_irq_disable();
+
+	/* Even though we may be SMP they will share the same clock
+	 * so all settings are made on CPU0. */
+	if (cris_freq_table[state].frequency == 200000)
+		clk_ctrl.pll = 1;
+	else
+		clk_ctrl.pll = 0;
+	REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+static int cris_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, cris_freq_table, 1000000);
+}
+
+static struct cpufreq_driver cris_freq_driver = {
+	.get	= cris_freq_get_cpu_frequency,
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = cris_freq_target,
+	.init	= cris_freq_cpu_init,
+	.name	= "cris_freq",
+	.attr	= cpufreq_generic_attr,
+};
+
+static int __init cris_freq_init(void)
+{
+	int ret;
+	ret = cpufreq_register_driver(&cris_freq_driver);
+	cpufreq_register_notifier(&cris_sdram_freq_notifier_block,
+		CPUFREQ_TRANSITION_NOTIFIER);
+	return ret;
+}
+
+static int
+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
+	void *data)
+{
+	int i;
+	struct cpufreq_freqs *freqs = data;
+	if (val == CPUFREQ_PRECHANGE) {
+		reg_ddr2_rw_cfg cfg =
+		  REG_RD(ddr2, regi_ddr2_ctrl, rw_cfg);
+		cfg.ref_interval = (freqs->new == 200000 ? 1560 : 46);
+
+		if (freqs->new == 200000)
+			for (i = 0; i < 50000; i++);
+		REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing);
+	}
+	return 0;
+}
+
+
+module_init(cris_freq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/cris-etraxfs-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/cris-etraxfs-cpufreq.c
new file mode 100644
index 0000000..4c4b5dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/cris-etraxfs-cpufreq.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <hwregs/reg_map.h>
+#include <arch/hwregs/reg_rdwr.h>
+#include <arch/hwregs/config_defs.h>
+#include <arch/hwregs/bif_core_defs.h>
+
+static int
+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
+			 void *data);
+
+static struct notifier_block cris_sdram_freq_notifier_block = {
+	.notifier_call = cris_sdram_freq_notifier
+};
+
+static struct cpufreq_frequency_table cris_freq_table[] = {
+	{0, 0x01, 6000},
+	{0, 0x02, 200000},
+	{0, 0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
+{
+	reg_config_rw_clk_ctrl clk_ctrl;
+	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
+	return clk_ctrl.pll ? 200000 : 6000;
+}
+
+static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
+{
+	reg_config_rw_clk_ctrl clk_ctrl;
+	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
+
+	local_irq_disable();
+
+	/* Even though we may be SMP they will share the same clock
+	 * so all settings are made on CPU0. */
+	if (cris_freq_table[state].frequency == 200000)
+		clk_ctrl.pll = 1;
+	else
+		clk_ctrl.pll = 0;
+	REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+static int cris_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, cris_freq_table, 1000000);
+}
+
+static struct cpufreq_driver cris_freq_driver = {
+	.get = cris_freq_get_cpu_frequency,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = cris_freq_target,
+	.init = cris_freq_cpu_init,
+	.name = "cris_freq",
+	.attr = cpufreq_generic_attr,
+};
+
+static int __init cris_freq_init(void)
+{
+	int ret;
+	ret = cpufreq_register_driver(&cris_freq_driver);
+	cpufreq_register_notifier(&cris_sdram_freq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return ret;
+}
+
+static int
+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
+			 void *data)
+{
+	int i;
+	struct cpufreq_freqs *freqs = data;
+	if (val == CPUFREQ_PRECHANGE) {
+		reg_bif_core_rw_sdram_timing timing =
+		    REG_RD(bif_core, regi_bif_core, rw_sdram_timing);
+		timing.cpd = (freqs->new == 200000 ? 0 : 1);
+
+		if (freqs->new == 200000)
+			for (i = 0; i < 50000; i++) ;
+		REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing);
+	}
+	return 0;
+}
+
+module_init(cris_freq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/davinci-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/davinci-cpufreq.c
new file mode 100644
index 0000000..d54a27c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/davinci-cpufreq.c
@@ -0,0 +1,161 @@
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/export.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+struct davinci_cpufreq {
+	struct device *dev;
+	struct clk *armclk;
+	struct clk *asyncclk;
+	unsigned long asyncrate;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
+{
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct clk *armclk = cpufreq.armclk;
+	unsigned int old_freq, new_freq;
+	int ret = 0;
+
+	old_freq = policy->cur;
+	new_freq = pdata->freq_table[idx].frequency;
+
+	/* if moving to higher frequency, up the voltage beforehand */
+	if (pdata->set_voltage && new_freq > old_freq) {
+		ret = pdata->set_voltage(idx);
+		if (ret)
+			return ret;
+	}
+
+	ret = clk_set_rate(armclk, new_freq * 1000);
+	if (ret)
+		return ret;
+
+	if (cpufreq.asyncclk) {
+		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
+		if (ret)
+			return ret;
+	}
+
+	/* if moving to lower freq, lower the voltage after lowering freq */
+	if (pdata->set_voltage && new_freq < old_freq)
+		pdata->set_voltage(idx);
+
+	return 0;
+}
+
+static int davinci_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Finish platform specific initialization */
+	if (pdata->init) {
+		result = pdata->init();
+		if (result)
+			return result;
+	}
+
+	policy->clk = cpufreq.armclk;
+
+	/*
+	 * Time measurement across the target() function yields ~1500-1800us
+	 * time taken with no drivers on notification list.
+	 * Setting the latency to 2000 us to accommodate addition of drivers
+	 * to pre/post change notification list.
+	 */
+	return cpufreq_generic_init(policy, freq_table, 2000 * 1000);
+}
+
+static struct cpufreq_driver davinci_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= davinci_target,
+	.get		= cpufreq_generic_get,
+	.init		= davinci_cpu_init,
+	.name		= "davinci",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+	struct clk *asyncclk;
+
+	if (!pdata)
+		return -EINVAL;
+	if (!pdata->freq_table)
+		return -EINVAL;
+
+	cpufreq.dev = &pdev->dev;
+
+	cpufreq.armclk = clk_get(NULL, "arm");
+	if (IS_ERR(cpufreq.armclk)) {
+		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+		return PTR_ERR(cpufreq.armclk);
+	}
+
+	asyncclk = clk_get(cpufreq.dev, "async");
+	if (!IS_ERR(asyncclk)) {
+		cpufreq.asyncclk = asyncclk;
+		cpufreq.asyncrate = clk_get_rate(asyncclk);
+	}
+
+	return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+	clk_put(cpufreq.armclk);
+
+	if (cpufreq.asyncclk)
+		clk_put(cpufreq.asyncclk);
+
+	return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+	.driver = {
+		.name	 = "cpufreq-davinci",
+	},
+	.remove = __exit_p(davinci_cpufreq_remove),
+};
+
+int __init davinci_cpufreq_init(void)
+{
+	return platform_driver_probe(&davinci_cpufreq_driver,
+							davinci_cpufreq_probe);
+}
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/e_powersaver.c b/src/kernel/linux/v4.14/drivers/cpufreq/e_powersaver.c
new file mode 100644
index 0000000..cdf097b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/e_powersaver.c
@@ -0,0 +1,433 @@
+/*
+ *  Based on documentation provided by Dave Jones. Thanks!
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+#include <asm/tsc.h>
+
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#define EPS_BRAND_C7M	0
+#define EPS_BRAND_C7	1
+#define EPS_BRAND_EDEN	2
+#define EPS_BRAND_C3	3
+#define EPS_BRAND_C7D	4
+
+struct eps_cpu_data {
+	u32 fsb;
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+	u32 bios_limit;
+#endif
+	struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+/* Module parameters */
+static int freq_failsafe_off;
+static int voltage_failsafe_off;
+static int set_max_voltage;
+
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+	eps_acpi_cpu_perf = kzalloc(sizeof(*eps_acpi_cpu_perf),
+				      GFP_KERNEL);
+	if (!eps_acpi_cpu_perf)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -ENOMEM;
+	}
+
+	if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -EIO;
+	}
+	return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+	if (eps_acpi_cpu_perf) {
+		acpi_processor_unregister_performance(0);
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+	}
+	return 0;
+}
+#endif
+
+static unsigned int eps_get(unsigned int cpu)
+{
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (cpu)
+		return 0;
+	centaur = eps_cpu[cpu];
+	if (centaur == NULL)
+		return 0;
+
+	/* Return current frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	return centaur->fsb * ((lo >> 8) & 0xff);
+}
+
+static int eps_set_state(struct eps_cpu_data *centaur,
+			 struct cpufreq_policy *policy,
+			 u32 dest_state)
+{
+	u32 lo, hi;
+	int i;
+
+	/* Wait while CPU is busy */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	i = 0;
+	while (lo & ((1 << 16) | (1 << 17))) {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			return -ENODEV;
+		}
+	}
+	/* Set new multiplier and voltage */
+	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+	/* Wait until transition end */
+	i = 0;
+	do {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			return -ENODEV;
+		}
+	} while (lo & ((1 << 16) | (1 << 17)));
+
+#ifdef DEBUG
+	{
+	u8 current_multiplier, current_voltage;
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	pr_info("Current multiplier = %d\n", current_multiplier);
+	}
+#endif
+	return 0;
+}
+
+static int eps_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	struct eps_cpu_data *centaur;
+	unsigned int cpu = policy->cpu;
+	unsigned int dest_state;
+	int ret;
+
+	if (unlikely(eps_cpu[cpu] == NULL))
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	/* Make frequency transition */
+	dest_state = centaur->freq_table[index].driver_data & 0xffff;
+	ret = eps_set_state(centaur, policy, dest_state);
+	if (ret)
+		pr_err("Timeout!\n");
+	return ret;
+}
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	u32 lo, hi;
+	u64 val;
+	u8 current_multiplier, current_voltage;
+	u8 max_multiplier, max_voltage;
+	u8 min_multiplier, min_voltage;
+	u8 brand = 0;
+	u32 fsb;
+	struct eps_cpu_data *centaur;
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	struct cpufreq_frequency_table *f_table;
+	int k, step, voltage;
+	int ret;
+	int states;
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+	unsigned int limit;
+#endif
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Check brand */
+	pr_info("Detected VIA ");
+
+	switch (c->x86_model) {
+	case 10:
+		rdmsr(0x1153, lo, hi);
+		brand = (((lo >> 2) ^ lo) >> 18) & 3;
+		pr_cont("Model A ");
+		break;
+	case 13:
+		rdmsr(0x1154, lo, hi);
+		brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
+		pr_cont("Model D ");
+		break;
+	}
+
+	switch (brand) {
+	case EPS_BRAND_C7M:
+		pr_cont("C7-M\n");
+		break;
+	case EPS_BRAND_C7:
+		pr_cont("C7\n");
+		break;
+	case EPS_BRAND_EDEN:
+		pr_cont("Eden\n");
+		break;
+	case EPS_BRAND_C7D:
+		pr_cont("C7-D\n");
+		break;
+	case EPS_BRAND_C3:
+		pr_cont("C3\n");
+		return -ENODEV;
+		break;
+	}
+	/* Enable Enhanced PowerSaver */
+	rdmsrl(MSR_IA32_MISC_ENABLE, val);
+	if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
+		wrmsrl(MSR_IA32_MISC_ENABLE, val);
+		/* Can be locked at 0 */
+		rdmsrl(MSR_IA32_MISC_ENABLE, val);
+		if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+			pr_info("Can't enable Enhanced PowerSaver\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	pr_info("Current multiplier = %d\n", current_multiplier);
+
+	/* Print limits */
+	max_voltage = hi & 0xff;
+	pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	max_multiplier = (hi >> 8) & 0xff;
+	pr_info("Highest multiplier = %d\n", max_multiplier);
+	min_voltage = (hi >> 16) & 0xff;
+	pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	min_multiplier = (hi >> 24) & 0xff;
+	pr_info("Lowest multiplier = %d\n", min_multiplier);
+
+	/* Sanity checks */
+	if (current_multiplier == 0 || max_multiplier == 0
+	    || min_multiplier == 0)
+		return -EINVAL;
+	if (current_multiplier > max_multiplier
+	    || max_multiplier <= min_multiplier)
+		return -EINVAL;
+	if (current_voltage > 0x1f || max_voltage > 0x1f)
+		return -EINVAL;
+	if (max_voltage < min_voltage
+	    || current_voltage < min_voltage
+	    || current_voltage > max_voltage)
+		return -EINVAL;
+
+	/* Check for systems using underclocked CPU */
+	if (!freq_failsafe_off && max_multiplier != current_multiplier) {
+		pr_info("Your processor is running at different frequency then its maximum. Aborting.\n");
+		pr_info("You can use freq_failsafe_off option to disable this check.\n");
+		return -EINVAL;
+	}
+	if (!voltage_failsafe_off && max_voltage != current_voltage) {
+		pr_info("Your processor is running at different voltage then its maximum. Aborting.\n");
+		pr_info("You can use voltage_failsafe_off option to disable this check.\n");
+		return -EINVAL;
+	}
+
+	/* Calc FSB speed */
+	fsb = cpu_khz / current_multiplier;
+
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+	/* Check for ACPI processor speed limit */
+	if (!ignore_acpi_limit && !eps_acpi_init()) {
+		if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+			pr_info("ACPI limit %u.%uGHz\n",
+				limit/1000000,
+				(limit%1000000)/10000);
+			eps_acpi_exit(policy);
+			/* Check if max_multiplier is in BIOS limits */
+			if (limit && max_multiplier * fsb > limit) {
+				pr_info("Aborting\n");
+				return -EINVAL;
+			}
+		}
+	}
+#endif
+
+	/* Allow user to set lower maximum voltage then that reported
+	 * by processor */
+	if (brand == EPS_BRAND_C7M && set_max_voltage) {
+		u32 v;
+
+		/* Change mV to something hardware can use */
+		v = (set_max_voltage - 700) / 16;
+		/* Check if voltage is within limits */
+		if (v >= min_voltage && v <= max_voltage) {
+			pr_info("Setting %dmV as maximum\n", v * 16 + 700);
+			max_voltage = v;
+		}
+	}
+
+	/* Calc number of p-states supported */
+	if (brand == EPS_BRAND_C7M)
+		states = max_multiplier - min_multiplier + 1;
+	else
+		states = 2;
+
+	/* Allocate private data and frequency table for current cpu */
+	centaur = kzalloc(sizeof(*centaur)
+		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
+		    GFP_KERNEL);
+	if (!centaur)
+		return -ENOMEM;
+	eps_cpu[0] = centaur;
+
+	/* Copy basic values */
+	centaur->fsb = fsb;
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+	centaur->bios_limit = limit;
+#endif
+
+	/* Fill frequency and MSR value table */
+	f_table = &centaur->freq_table[0];
+	if (brand != EPS_BRAND_C7M) {
+		f_table[0].frequency = fsb * min_multiplier;
+		f_table[0].driver_data = (min_multiplier << 8) | min_voltage;
+		f_table[1].frequency = fsb * max_multiplier;
+		f_table[1].driver_data = (max_multiplier << 8) | max_voltage;
+		f_table[2].frequency = CPUFREQ_TABLE_END;
+	} else {
+		k = 0;
+		step = ((max_voltage - min_voltage) * 256)
+			/ (max_multiplier - min_multiplier);
+		for (i = min_multiplier; i <= max_multiplier; i++) {
+			voltage = (k * step) / 256 + min_voltage;
+			f_table[k].frequency = fsb * i;
+			f_table[k].driver_data = (i << 8) | voltage;
+			k++;
+		}
+		f_table[k].frequency = CPUFREQ_TABLE_END;
+	}
+
+	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+
+	ret = cpufreq_table_validate_and_show(policy, &centaur->freq_table[0]);
+	if (ret) {
+		kfree(centaur);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+
+	/* Bye */
+	kfree(eps_cpu[cpu]);
+	eps_cpu[cpu] = NULL;
+	return 0;
+}
+
+static struct cpufreq_driver eps_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= eps_target,
+	.init		= eps_cpu_init,
+	.exit		= eps_cpu_exit,
+	.get		= eps_get,
+	.name		= "e_powersaver",
+	.attr		= cpufreq_generic_attr,
+};
+
+
+/* This driver will work only on Centaur C7 processors with
+ * Enhanced SpeedStep/PowerSaver registers */
+static const struct x86_cpu_id eps_cpu_id[] = {
+	{ X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id);
+
+static int __init eps_init(void)
+{
+	if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10)
+		return -ENODEV;
+	if (cpufreq_register_driver(&eps_driver))
+		return -EINVAL;
+	return 0;
+}
+
+static void __exit eps_exit(void)
+{
+	cpufreq_unregister_driver(&eps_driver);
+}
+
+/* Allow user to overclock his machine or to change frequency to higher after
+ * unloading module */
+module_param(freq_failsafe_off, int, 0644);
+MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
+module_param(voltage_failsafe_off, int, 0644);
+MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
+module_param(set_max_voltage, int, 0644);
+MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
+
+MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
+MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/elanfreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/elanfreq.c
new file mode 100644
index 0000000..45e2ca6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/elanfreq.c
@@ -0,0 +1,232 @@
+/*
+ *	elanfreq:	cpufreq driver for the AMD ELAN family
+ *
+ *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *	Parts of this code are (c) Sven Geggus <sven@geggus.net>
+ *
+ *      All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+	int clock;		/* frequency in kHz                         */
+	int val40h;		/* PMU Force Mode register                  */
+	int val80h;		/* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies
+ * are listed in ascending order here!
+ */
+static struct s_elan_multiplier elan_multiplier[] = {
+	{1000,	0x02,	0x18},
+	{2000,	0x02,	0x10},
+	{4000,	0x02,	0x08},
+	{8000,	0x00,	0x00},
+	{16000,	0x00,	0x02},
+	{33000,	0x00,	0x04},
+	{66000,	0x01,	0x04},
+	{99000,	0x01,	0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+	{0, 0,	1000},
+	{0, 1,	2000},
+	{0, 2,	4000},
+	{0, 3,	8000},
+	{0, 4,	16000},
+	{0, 5,	33000},
+	{0, 6,	66000},
+	{0, 7,	99000},
+	{0, 0,	CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *	elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *	Finds out at which frequency the CPU of the Elan SOC runs
+ *	at the moment. Frequencies from 1 to 33 MHz are generated
+ *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *	and have the rest of the chip running with 33 MHz.
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg;    /* Clock Speed Register */
+
+	local_irq_disable();
+	outb_p(0x80, REG_CSCIR);
+	clockspeed_reg = inb_p(REG_CSCDR);
+	local_irq_enable();
+
+	if ((clockspeed_reg & 0xE0) == 0xE0)
+		return 0;
+
+	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
+	if ((clockspeed_reg & 0xE0) == 0xC0) {
+		if ((clockspeed_reg & 0x01) == 0)
+			return 66000;
+		else
+			return 99000;
+	}
+
+	/* 33 MHz is not 32 MHz... */
+	if ((clockspeed_reg & 0xE0) == 0xA0)
+		return 33000;
+
+	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
+}
+
+
+static int elanfreq_target(struct cpufreq_policy *policy,
+			    unsigned int state)
+{
+	/*
+	 * Access to the Elan's internal registers is indexed via
+	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
+	 * 0x23: Chip Setup & Control Register Data  Register (CSCD)
+	 *
+	 */
+
+	/*
+	 * 0x40 is the Power Management Unit's Force Mode Register.
+	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+	 */
+
+	local_irq_disable();
+	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
+	outb_p(0x00, REG_CSCDR);
+	local_irq_enable();		/* wait till internal pipelines and */
+	udelay(1000);			/* buffers have cleaned up          */
+
+	local_irq_disable();
+
+	/* now, set the CPU clock speed register (0x80) */
+	outb_p(0x80, REG_CSCIR);
+	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
+
+	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+	outb_p(0x40, REG_CSCIR);
+	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
+	udelay(10000);
+	local_irq_enable();
+
+	return 0;
+}
+/*
+ *	Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	struct cpufreq_frequency_table *pos;
+
+	/* capability check */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+	    (c->x86 != 4) || (c->x86_model != 10))
+		return -ENODEV;
+
+	/* max freq */
+	if (!max_freq)
+		max_freq = elanfreq_get_cpu_frequency(0);
+
+	/* table init */
+	cpufreq_for_each_entry(pos, elanfreq_table)
+		if (pos->frequency > max_freq)
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
+
+	return cpufreq_table_validate_and_show(policy, elanfreq_table);
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+	max_freq = simple_strtoul(str, &str, 0);
+	pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+	return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct cpufreq_driver elanfreq_driver = {
+	.get		= elanfreq_get_cpu_frequency,
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= elanfreq_target,
+	.init		= elanfreq_cpu_init,
+	.name		= "elanfreq",
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id elan_id[] = {
+	{ X86_VENDOR_AMD, 4, 10, },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, elan_id);
+
+static int __init elanfreq_init(void)
+{
+	if (!x86_match_cpu(elan_id))
+		return -ENODEV;
+	return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void)
+{
+	cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param(max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
+		"Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/exynos5440-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/exynos5440-cpufreq.c
new file mode 100644
index 0000000..b6b369c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/exynos5440-cpufreq.c
@@ -0,0 +1,453 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Amit Daniel Kachhap <amit.daniel@samsung.com>
+ *
+ * EXYNOS5440 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Register definitions */
+#define XMU_DVFS_CTRL		0x0060
+#define XMU_PMU_P0_7		0x0064
+#define XMU_C0_3_PSTATE		0x0090
+#define XMU_P_LIMIT		0x00a0
+#define XMU_P_STATUS		0x00a4
+#define XMU_PMUEVTEN		0x00d0
+#define XMU_PMUIRQEN		0x00d4
+#define XMU_PMUIRQ		0x00d8
+
+/* PMU mask and shift definations */
+#define P_VALUE_MASK		0x7
+
+#define XMU_DVFS_CTRL_EN_SHIFT	0
+
+#define P0_7_CPUCLKDEV_SHIFT	21
+#define P0_7_CPUCLKDEV_MASK	0x7
+#define P0_7_ATBCLKDEV_SHIFT	18
+#define P0_7_ATBCLKDEV_MASK	0x7
+#define P0_7_CSCLKDEV_SHIFT	15
+#define P0_7_CSCLKDEV_MASK	0x7
+#define P0_7_CPUEMA_SHIFT	28
+#define P0_7_CPUEMA_MASK	0xf
+#define P0_7_L2EMA_SHIFT	24
+#define P0_7_L2EMA_MASK		0xf
+#define P0_7_VDD_SHIFT		8
+#define P0_7_VDD_MASK		0x7f
+#define P0_7_FREQ_SHIFT		0
+#define P0_7_FREQ_MASK		0xff
+
+#define C0_3_PSTATE_VALID_SHIFT	8
+#define C0_3_PSTATE_CURR_SHIFT	4
+#define C0_3_PSTATE_NEW_SHIFT	0
+
+#define PSTATE_CHANGED_EVTEN_SHIFT	0
+
+#define PSTATE_CHANGED_IRQEN_SHIFT	0
+
+#define PSTATE_CHANGED_SHIFT		0
+
+/* some constant values for clock divider calculation */
+#define CPU_DIV_FREQ_MAX	500
+#define CPU_DBG_FREQ_MAX	375
+#define CPU_ATB_FREQ_MAX	500
+
+#define PMIC_LOW_VOLT		0x30
+#define PMIC_HIGH_VOLT		0x28
+
+#define CPUEMA_HIGH		0x2
+#define CPUEMA_MID		0x4
+#define CPUEMA_LOW		0x7
+
+#define L2EMA_HIGH		0x1
+#define L2EMA_MID		0x3
+#define L2EMA_LOW		0x4
+
+#define DIV_TAB_MAX	2
+/* frequency unit is 20MHZ */
+#define FREQ_UNIT	20
+#define MAX_VOLTAGE	1550000 /* In microvolt */
+#define VOLTAGE_STEP	12500	/* In microvolt */
+
+#define CPUFREQ_NAME		"exynos5440_dvfs"
+#define DEF_TRANS_LATENCY	100000
+
+enum cpufreq_level_index {
+	L0, L1, L2, L3, L4,
+	L5, L6, L7, L8, L9,
+};
+#define CPUFREQ_LEVEL_END	(L7 + 1)
+
+struct exynos_dvfs_data {
+	void __iomem *base;
+	struct resource *mem;
+	int irq;
+	struct clk *cpu_clk;
+	unsigned int latency;
+	struct cpufreq_frequency_table *freq_table;
+	unsigned int freq_count;
+	struct device *dev;
+	bool dvfs_enabled;
+	struct work_struct irq_work;
+};
+
+static struct exynos_dvfs_data *dvfs_info;
+static DEFINE_MUTEX(cpufreq_lock);
+static struct cpufreq_freqs freqs;
+
+static int init_div_table(void)
+{
+	struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
+	unsigned int tmp, clk_div, ema_div, freq, volt_id;
+	struct dev_pm_opp *opp;
+
+	cpufreq_for_each_entry(pos, freq_tbl) {
+		opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
+					pos->frequency * 1000, true);
+		if (IS_ERR(opp)) {
+			dev_err(dvfs_info->dev,
+				"failed to find valid OPP for %u KHZ\n",
+				pos->frequency);
+			return PTR_ERR(opp);
+		}
+
+		freq = pos->frequency / 1000; /* In MHZ */
+		clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
+					<< P0_7_CPUCLKDEV_SHIFT;
+		clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
+					<< P0_7_ATBCLKDEV_SHIFT;
+		clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK)
+					<< P0_7_CSCLKDEV_SHIFT;
+
+		/* Calculate EMA */
+		volt_id = dev_pm_opp_get_voltage(opp);
+
+		volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP;
+		if (volt_id < PMIC_HIGH_VOLT) {
+			ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) |
+				(L2EMA_HIGH << P0_7_L2EMA_SHIFT);
+		} else if (volt_id > PMIC_LOW_VOLT) {
+			ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) |
+				(L2EMA_LOW << P0_7_L2EMA_SHIFT);
+		} else {
+			ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) |
+				(L2EMA_MID << P0_7_L2EMA_SHIFT);
+		}
+
+		tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
+			| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
+
+		__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 *
+						(pos - freq_tbl));
+		dev_pm_opp_put(opp);
+	}
+
+	return 0;
+}
+
+static void exynos_enable_dvfs(unsigned int cur_frequency)
+{
+	unsigned int tmp, cpu;
+	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+	struct cpufreq_frequency_table *pos;
+	/* Disable DVFS */
+	__raw_writel(0,	dvfs_info->base + XMU_DVFS_CTRL);
+
+	/* Enable PSTATE Change Event */
+	tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN);
+	tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT);
+	__raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN);
+
+	/* Enable PSTATE Change IRQ */
+	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN);
+	tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT);
+	__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
+
+	/* Set initial performance index */
+	cpufreq_for_each_entry(pos, freq_table)
+		if (pos->frequency == cur_frequency)
+			break;
+
+	if (pos->frequency == CPUFREQ_TABLE_END) {
+		dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
+		/* Assign the highest frequency */
+		pos = freq_table;
+		cur_frequency = pos->frequency;
+	}
+
+	dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
+						cur_frequency);
+
+	for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
+		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
+		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
+		tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
+		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
+	}
+
+	/* Enable DVFS */
+	__raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT,
+				dvfs_info->base + XMU_DVFS_CTRL);
+}
+
+static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int tmp;
+	int i;
+	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+
+	mutex_lock(&cpufreq_lock);
+
+	freqs.old = policy->cur;
+	freqs.new = freq_table[index].frequency;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+
+	/* Set the target frequency in all C0_3_PSTATE register */
+	for_each_cpu(i, policy->cpus) {
+		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
+		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
+		tmp |= (index << C0_3_PSTATE_NEW_SHIFT);
+
+		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
+	}
+	mutex_unlock(&cpufreq_lock);
+	return 0;
+}
+
+static void exynos_cpufreq_work(struct work_struct *work)
+{
+	unsigned int cur_pstate, index;
+	struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+
+	/* Ensure we can access cpufreq structures */
+	if (unlikely(dvfs_info->dvfs_enabled == false))
+		goto skip_work;
+
+	mutex_lock(&cpufreq_lock);
+	freqs.old = policy->cur;
+
+	cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);
+	if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)
+		index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK;
+	else
+		index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK;
+
+	if (likely(index < dvfs_info->freq_count)) {
+		freqs.new = freq_table[index].frequency;
+	} else {
+		dev_crit(dvfs_info->dev, "New frequency out of range\n");
+		freqs.new = freqs.old;
+	}
+	cpufreq_freq_transition_end(policy, &freqs, 0);
+
+	cpufreq_cpu_put(policy);
+	mutex_unlock(&cpufreq_lock);
+skip_work:
+	enable_irq(dvfs_info->irq);
+}
+
+static irqreturn_t exynos_cpufreq_irq(int irq, void *id)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ);
+	if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) {
+		__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ);
+		disable_irq_nosync(irq);
+		schedule_work(&dvfs_info->irq_work);
+	}
+	return IRQ_HANDLED;
+}
+
+static void exynos_sort_descend_freq_table(void)
+{
+	struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
+	int i = 0, index;
+	unsigned int tmp_freq;
+	/*
+	 * Exynos5440 clock controller state logic expects the cpufreq table to
+	 * be in descending order. But the OPP library constructs the table in
+	 * ascending order. So to make the table descending we just need to
+	 * swap the i element with the N - i element.
+	 */
+	for (i = 0; i < dvfs_info->freq_count / 2; i++) {
+		index = dvfs_info->freq_count - i - 1;
+		tmp_freq = freq_tbl[i].frequency;
+		freq_tbl[i].frequency = freq_tbl[index].frequency;
+		freq_tbl[index].frequency = tmp_freq;
+	}
+}
+
+static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	policy->clk = dvfs_info->cpu_clk;
+	return cpufreq_generic_init(policy, dvfs_info->freq_table,
+			dvfs_info->latency);
+}
+
+static struct cpufreq_driver exynos_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION |
+				CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= exynos_target,
+	.get		= cpufreq_generic_get,
+	.init		= exynos_cpufreq_cpu_init,
+	.name		= CPUFREQ_NAME,
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct of_device_id exynos_cpufreq_match[] = {
+	{
+		.compatible = "samsung,exynos5440-cpufreq",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_cpufreq_match);
+
+static int exynos_cpufreq_probe(struct platform_device *pdev)
+{
+	int ret = -EINVAL;
+	struct device_node *np;
+	struct resource res;
+	unsigned int cur_frequency;
+
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL);
+	if (!dvfs_info) {
+		ret = -ENOMEM;
+		goto err_put_node;
+	}
+
+	dvfs_info->dev = &pdev->dev;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		goto err_put_node;
+
+	dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res);
+	if (IS_ERR(dvfs_info->base)) {
+		ret = PTR_ERR(dvfs_info->base);
+		goto err_put_node;
+	}
+
+	dvfs_info->irq = irq_of_parse_and_map(np, 0);
+	if (!dvfs_info->irq) {
+		dev_err(dvfs_info->dev, "No cpufreq irq found\n");
+		ret = -ENODEV;
+		goto err_put_node;
+	}
+
+	ret = dev_pm_opp_of_add_table(dvfs_info->dev);
+	if (ret) {
+		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
+		goto err_put_node;
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(dvfs_info->dev,
+					    &dvfs_info->freq_table);
+	if (ret) {
+		dev_err(dvfs_info->dev,
+			"failed to init cpufreq table: %d\n", ret);
+		goto err_free_opp;
+	}
+	dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev);
+	exynos_sort_descend_freq_table();
+
+	if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency))
+		dvfs_info->latency = DEF_TRANS_LATENCY;
+
+	dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk");
+	if (IS_ERR(dvfs_info->cpu_clk)) {
+		dev_err(dvfs_info->dev, "Failed to get cpu clock\n");
+		ret = PTR_ERR(dvfs_info->cpu_clk);
+		goto err_free_table;
+	}
+
+	cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
+	if (!cur_frequency) {
+		dev_err(dvfs_info->dev, "Failed to get clock rate\n");
+		ret = -EINVAL;
+		goto err_free_table;
+	}
+	cur_frequency /= 1000;
+
+	INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);
+	ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,
+				exynos_cpufreq_irq, IRQF_TRIGGER_NONE,
+				CPUFREQ_NAME, dvfs_info);
+	if (ret) {
+		dev_err(dvfs_info->dev, "Failed to register IRQ\n");
+		goto err_free_table;
+	}
+
+	ret = init_div_table();
+	if (ret) {
+		dev_err(dvfs_info->dev, "Failed to initialise div table\n");
+		goto err_free_table;
+	}
+
+	exynos_enable_dvfs(cur_frequency);
+	ret = cpufreq_register_driver(&exynos_driver);
+	if (ret) {
+		dev_err(dvfs_info->dev,
+			"%s: failed to register cpufreq driver\n", __func__);
+		goto err_free_table;
+	}
+
+	of_node_put(np);
+	dvfs_info->dvfs_enabled = true;
+	return 0;
+
+err_free_table:
+	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
+err_free_opp:
+	dev_pm_opp_of_remove_table(dvfs_info->dev);
+err_put_node:
+	of_node_put(np);
+	dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
+	return ret;
+}
+
+static int exynos_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&exynos_driver);
+	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
+	dev_pm_opp_of_remove_table(dvfs_info->dev);
+	return 0;
+}
+
+static struct platform_driver exynos_cpufreq_platdrv = {
+	.driver = {
+		.name	= "exynos5440-cpufreq",
+		.of_match_table = exynos_cpufreq_match,
+	},
+	.probe		= exynos_cpufreq_probe,
+	.remove		= exynos_cpufreq_remove,
+};
+module_platform_driver(exynos_cpufreq_platdrv);
+
+MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>");
+MODULE_DESCRIPTION("Exynos5440 cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/freq_table.c b/src/kernel/linux/v4.14/drivers/cpufreq/freq_table.c
new file mode 100644
index 0000000..3bbbf9e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/freq_table.c
@@ -0,0 +1,371 @@
+/*
+ * linux/drivers/cpufreq/freq_table.c
+ *
+ * Copyright (C) 2002 - 2003 Dominik Brodowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+
+/*********************************************************************
+ *                     FREQUENCY TABLE HELPERS                       *
+ *********************************************************************/
+
+bool policy_has_boost_freq(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pos, *table = policy->freq_table;
+
+	if (!table)
+		return false;
+
+	cpufreq_for_each_valid_entry(pos, table)
+		if (pos->flags & CPUFREQ_BOOST_FREQ)
+			return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(policy_has_boost_freq);
+
+int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
+				    struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	unsigned int min_freq = ~0;
+	unsigned int max_freq = 0;
+	unsigned int freq;
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
+
+		if (!cpufreq_boost_enabled()
+		    && (pos->flags & CPUFREQ_BOOST_FREQ))
+			continue;
+
+		pr_debug("table entry %u: %u kHz\n", (int)(pos - table), freq);
+		if (freq < min_freq)
+			min_freq = freq;
+		if (freq > max_freq)
+			max_freq = freq;
+	}
+
+	policy->min = policy->cpuinfo.min_freq = min_freq;
+	policy->max = policy->cpuinfo.max_freq = max_freq;
+
+	if (policy->min == ~0)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
+				   struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	unsigned int freq, next_larger = ~0;
+	bool found = false;
+
+	pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
+					policy->min, policy->max, policy->cpu);
+
+	cpufreq_verify_within_cpu_limits(policy);
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
+
+		if ((freq >= policy->min) && (freq <= policy->max)) {
+			found = true;
+			break;
+		}
+
+		if ((next_larger > freq) && (freq > policy->max))
+			next_larger = freq;
+	}
+
+	if (!found) {
+		policy->max = next_larger;
+		cpufreq_verify_within_cpu_limits(policy);
+	}
+
+	pr_debug("verification lead to (%u - %u kHz) for cpu %u\n",
+				policy->min, policy->max, policy->cpu);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify);
+
+/*
+ * Generic routine to verify policy & frequency table, requires driver to set
+ * policy->freq_table prior to it.
+ */
+int cpufreq_generic_frequency_table_verify(struct cpufreq_policy *policy)
+{
+	if (!policy->freq_table)
+		return -ENODEV;
+
+	return cpufreq_frequency_table_verify(policy, policy->freq_table);
+}
+EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify);
+
+int cpufreq_table_index_unsorted(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation)
+{
+	struct cpufreq_frequency_table optimal = {
+		.driver_data = ~0,
+		.frequency = 0,
+	};
+	struct cpufreq_frequency_table suboptimal = {
+		.driver_data = ~0,
+		.frequency = 0,
+	};
+	struct cpufreq_frequency_table *pos;
+	struct cpufreq_frequency_table *table = policy->freq_table;
+	unsigned int freq, diff, i = 0;
+	int index;
+
+	pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
+					target_freq, relation, policy->cpu);
+
+	switch (relation) {
+	case CPUFREQ_RELATION_H:
+		suboptimal.frequency = ~0;
+		break;
+	case CPUFREQ_RELATION_L:
+	case CPUFREQ_RELATION_C:
+		optimal.frequency = ~0;
+		break;
+	}
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
+
+		i = pos - table;
+		if ((freq < policy->min) || (freq > policy->max))
+			continue;
+		if (freq == target_freq) {
+			optimal.driver_data = i;
+			break;
+		}
+		switch (relation) {
+		case CPUFREQ_RELATION_H:
+			if (freq < target_freq) {
+				if (freq >= optimal.frequency) {
+					optimal.frequency = freq;
+					optimal.driver_data = i;
+				}
+			} else {
+				if (freq <= suboptimal.frequency) {
+					suboptimal.frequency = freq;
+					suboptimal.driver_data = i;
+				}
+			}
+			break;
+		case CPUFREQ_RELATION_L:
+			if (freq > target_freq) {
+				if (freq <= optimal.frequency) {
+					optimal.frequency = freq;
+					optimal.driver_data = i;
+				}
+			} else {
+				if (freq >= suboptimal.frequency) {
+					suboptimal.frequency = freq;
+					suboptimal.driver_data = i;
+				}
+			}
+			break;
+		case CPUFREQ_RELATION_C:
+			diff = abs(freq - target_freq);
+			if (diff < optimal.frequency ||
+			    (diff == optimal.frequency &&
+			     freq > table[optimal.driver_data].frequency)) {
+				optimal.frequency = diff;
+				optimal.driver_data = i;
+			}
+			break;
+		}
+	}
+	if (optimal.driver_data > i) {
+		if (suboptimal.driver_data > i) {
+			WARN(1, "Invalid frequency table: %d\n", policy->cpu);
+			return 0;
+		}
+
+		index = suboptimal.driver_data;
+	} else
+		index = optimal.driver_data;
+
+	pr_debug("target index is %u, freq is:%u kHz\n", index,
+		 table[index].frequency);
+	return index;
+}
+EXPORT_SYMBOL_GPL(cpufreq_table_index_unsorted);
+
+int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
+		unsigned int freq)
+{
+	struct cpufreq_frequency_table *pos, *table = policy->freq_table;
+
+	if (unlikely(!table)) {
+		pr_debug("%s: Unable to find frequency table\n", __func__);
+		return -ENOENT;
+	}
+
+	cpufreq_for_each_valid_entry(pos, table)
+		if (pos->frequency == freq)
+			return pos - table;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index);
+
+/**
+ * show_available_freqs - show available frequencies for the specified CPU
+ */
+static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf,
+				    bool show_boost)
+{
+	ssize_t count = 0;
+	struct cpufreq_frequency_table *pos, *table = policy->freq_table;
+
+	if (!table)
+		return -ENODEV;
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		/*
+		 * show_boost = true and driver_data = BOOST freq
+		 * display BOOST freqs
+		 *
+		 * show_boost = false and driver_data = BOOST freq
+		 * show_boost = true and driver_data != BOOST freq
+		 * continue - do not display anything
+		 *
+		 * show_boost = false and driver_data != BOOST freq
+		 * display NON BOOST freqs
+		 */
+		if (show_boost ^ (pos->flags & CPUFREQ_BOOST_FREQ))
+			continue;
+
+		count += sprintf(&buf[count], "%d ", pos->frequency);
+	}
+	count += sprintf(&buf[count], "\n");
+
+	return count;
+
+}
+
+#define cpufreq_attr_available_freq(_name)	  \
+struct freq_attr cpufreq_freq_attr_##_name##_freqs =     \
+__ATTR_RO(_name##_frequencies)
+
+/**
+ * show_scaling_available_frequencies - show available normal frequencies for
+ * the specified CPU
+ */
+static ssize_t scaling_available_frequencies_show(struct cpufreq_policy *policy,
+						  char *buf)
+{
+	return show_available_freqs(policy, buf, false);
+}
+cpufreq_attr_available_freq(scaling_available);
+EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
+
+/**
+ * show_available_boost_freqs - show available boost frequencies for
+ * the specified CPU
+ */
+static ssize_t scaling_boost_frequencies_show(struct cpufreq_policy *policy,
+					      char *buf)
+{
+	return show_available_freqs(policy, buf, true);
+}
+cpufreq_attr_available_freq(scaling_boost);
+EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_boost_freqs);
+
+struct freq_attr *cpufreq_generic_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+#ifdef CONFIG_CPU_FREQ_BOOST_SW
+	&cpufreq_freq_attr_scaling_boost_freqs,
+#endif
+	NULL,
+};
+EXPORT_SYMBOL_GPL(cpufreq_generic_attr);
+
+static int set_freq_table_sorted(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pos, *table = policy->freq_table;
+	struct cpufreq_frequency_table *prev = NULL;
+	int ascending = 0;
+
+	policy->freq_table_sorted = CPUFREQ_TABLE_UNSORTED;
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		if (!prev) {
+			prev = pos;
+			continue;
+		}
+
+		if (pos->frequency == prev->frequency) {
+			pr_warn("Duplicate freq-table entries: %u\n",
+				pos->frequency);
+			return -EINVAL;
+		}
+
+		/* Frequency increased from prev to pos */
+		if (pos->frequency > prev->frequency) {
+			/* But frequency was decreasing earlier */
+			if (ascending < 0) {
+				pr_debug("Freq table is unsorted\n");
+				return 0;
+			}
+
+			ascending++;
+		} else {
+			/* Frequency decreased from prev to pos */
+
+			/* But frequency was increasing earlier */
+			if (ascending > 0) {
+				pr_debug("Freq table is unsorted\n");
+				return 0;
+			}
+
+			ascending--;
+		}
+
+		prev = pos;
+	}
+
+	if (ascending > 0)
+		policy->freq_table_sorted = CPUFREQ_TABLE_SORTED_ASCENDING;
+	else
+		policy->freq_table_sorted = CPUFREQ_TABLE_SORTED_DESCENDING;
+
+	pr_debug("Freq table is sorted in %s order\n",
+		 ascending > 0 ? "ascending" : "descending");
+
+	return 0;
+}
+
+int cpufreq_table_validate_and_show(struct cpufreq_policy *policy,
+				      struct cpufreq_frequency_table *table)
+{
+	int ret;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, table);
+	if (ret)
+		return ret;
+
+	policy->freq_table = table;
+	return set_freq_table_sorted(policy);
+}
+EXPORT_SYMBOL_GPL(cpufreq_table_validate_and_show);
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("CPUfreq frequency table helpers");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/gx-suspmod.c b/src/kernel/linux/v4.14/drivers/cpufreq/gx-suspmod.c
new file mode 100644
index 0000000..8f52a06
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/gx-suspmod.c
@@ -0,0 +1,502 @@
+/*
+ *	Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Hiroshi Miura   <miura@da-cha.org>
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *
+ * Theoretical note:
+ *
+ *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ *	are based on Suspend Modulation.
+ *
+ *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ *	the CPU enters an idle state. GX1 stops its core clock when SUSP# is
+ *	asserted then power consumption is reduced.
+ *
+ *	Suspend Modulation's OFF/ON duration are configurable
+ *	with 'Suspend Modulation OFF Count Register'
+ *	and 'Suspend Modulation ON Count Register'.
+ *	These registers are 8bit counters that represent the number of
+ *	32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ *	to the processor.
+ *
+ *	These counters define a ratio which is the effective frequency
+ *	of operation of the system.
+ *
+ *			       OFF Count
+ *	F_eff = Fgx * ----------------------
+ *	                OFF Count + ON Count
+ *
+ *	0 <= On Count, Off Count <= 255
+ *
+ *	From these limits, we can get register values
+ *
+ *	off_duration + on_duration <= MAX_DURATION
+ *	on_duration = off_duration * (stock_freq - freq) / freq
+ *
+ *      off_duration  =  (freq * DURATION) / stock_freq
+ *      on_duration = DURATION - off_duration
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *	Dec. 12, 2003	Hiroshi Miura <miura@da-cha.org>
+ *		- fix on/off register mistake
+ *		- fix cpu_khz calc when it stops cpu modulation.
+ *
+ *	Dec. 11, 2002	Hiroshi Miura <miura@da-cha.org>
+ *		- rewrite for Cyrix MediaGX Cx5510/5520 and
+ *		  NatSemi Geode Cs5530(A).
+ *
+ *	Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
+ *		- cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ *	Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ *			Suspend Modulation - Definitions		*
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/processor-cyrix.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1	0x80	/* power management enable register 1 */
+#define PCI_PMER2	0x81	/* power management enable register 2 */
+#define PCI_PMER3	0x82	/* power management enable register 3 */
+#define PCI_IRQTC	0x8c	/* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC	0x8d	/* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF	0x94	/* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON	0x95	/* suspend modulation ON counter register */
+#define PCI_SUSCFG	0x96	/* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM		(1<<0)	/* global power management */
+#define GIT		(1<<1)	/* globally enable PM device idle timers */
+#define GTR		(1<<2)	/* globally enable IO traps */
+#define IRQ_SPDUP	(1<<3)	/* disable clock throttle during interrupt handling */
+#define VID_SPDUP	(1<<4)	/* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD		(1<<0)	/* enable/disable suspend modulation */
+/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
+#define SMISPDUP	(1<<1)	/* select how SMI re-enable suspend modulation: */
+				/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG		(1<<2)	/* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the below is supported only with cs5530A */
+#define PWRSVE_ISA	(1<<3)	/* stop ISA clock  */
+#define PWRSVE		(1<<4)	/* active idle */
+
+struct gxfreq_params {
+	u8 on_duration;
+	u8 off_duration;
+	u8 pci_suscfg;
+	u8 pci_pmer1;
+	u8 pci_pmer2;
+	struct pci_dev *cs55x0;
+};
+
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+
+/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
+static int pci_busclk;
+module_param(pci_busclk, int, 0444);
+
+/* maximum duration for which the cpu may be suspended
+ * (32us * MAX_DURATION). If no parameter is given, this defaults
+ * to 255.
+ * Note that this leads to a maximum of 8 ms(!) where the CPU clock
+ * is suspended -- processing power is just 0.39% of what it used to be,
+ * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
+static int max_duration = 255;
+module_param(max_duration, int, 0444);
+
+/* For the default policy, we want at least some processing power
+ * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
+ */
+#define POLICY_MIN_DIV 20
+
+
+/**
+ * we can detect a core multiplier from dir0_lsb
+ * from GX1 datasheet p.56,
+ *	MULT[3:0]:
+ *	0000 = SYSCLK multiplied by 4 (test only)
+ *	0001 = SYSCLK multiplied by 10
+ *	0010 = SYSCLK multiplied by 4
+ *	0011 = SYSCLK multiplied by 6
+ *	0100 = SYSCLK multiplied by 9
+ *	0101 = SYSCLK multiplied by 5
+ *	0110 = SYSCLK multiplied by 7
+ *	0111 = SYSCLK multiplied by 8
+ *              of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+		4, 10, 4, 6, 9, 5, 7, 8,
+		0, 0, 0, 0, 0, 0, 0, 0
+};
+
+
+/****************************************************************
+ *	Low Level chipset interface				*
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, gx_chipset_tbl);
+
+static void gx_write_byte(int reg, int value)
+{
+	pci_write_config_byte(gx_params->cs55x0, reg, value);
+}
+
+/**
+ * gx_detect_chipset:
+ *
+ **/
+static struct pci_dev * __init gx_detect_chipset(void)
+{
+	struct pci_dev *gx_pci = NULL;
+
+	/* detect which companion chip is used */
+	for_each_pci_dev(gx_pci) {
+		if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
+			return gx_pci;
+	}
+
+	pr_debug("error: no supported chipset found!\n");
+	return NULL;
+}
+
+/**
+ * gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
+ * Geode CPU runs.
+ */
+static unsigned int gx_get_cpuspeed(unsigned int cpu)
+{
+	if ((gx_params->pci_suscfg & SUSMOD) == 0)
+		return stock_freq;
+
+	return (stock_freq * gx_params->off_duration)
+		/ (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ *      gx_validate_speed:
+ *      determine current cpu speed
+ *
+ **/
+
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
+		u8 *off_duration)
+{
+	unsigned int i;
+	u8 tmp_on, tmp_off;
+	int old_tmp_freq = stock_freq;
+	int tmp_freq;
+
+	*off_duration = 1;
+	*on_duration = 0;
+
+	for (i = max_duration; i > 0; i--) {
+		tmp_off = ((khz * i) / stock_freq) & 0xff;
+		tmp_on = i - tmp_off;
+		tmp_freq = (stock_freq * tmp_off) / i;
+		/* if this relation is closer to khz, use this. If it's equal,
+		 * prefer it, too - lower latency */
+		if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
+			*on_duration = tmp_on;
+			*off_duration = tmp_off;
+			old_tmp_freq = tmp_freq;
+		}
+	}
+
+	return old_tmp_freq;
+}
+
+
+/**
+ * gx_set_cpuspeed:
+ * set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(struct cpufreq_policy *policy, unsigned int khz)
+{
+	u8 suscfg, pmer1;
+	unsigned int new_khz;
+	unsigned long flags;
+	struct cpufreq_freqs freqs;
+
+	freqs.old = gx_get_cpuspeed(0);
+
+	new_khz = gx_validate_speed(khz, &gx_params->on_duration,
+			&gx_params->off_duration);
+
+	freqs.new = new_khz;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	local_irq_save(flags);
+
+	if (new_khz != stock_freq) {
+		/* if new khz == 100% of CPU speed, it is special case */
+		switch (gx_params->cs55x0->device) {
+		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+			/* FIXME: need to test other values -- Zwane,Miura */
+			/* typical 2 to 4ms */
+			gx_write_byte(PCI_IRQTC, 4);
+			/* typical 50 to 100ms */
+			gx_write_byte(PCI_VIDTC, 100);
+			gx_write_byte(PCI_PMER1, pmer1);
+
+			if (gx_params->cs55x0->revision < 0x10) {
+				/* CS5530(rev 1.2, 1.3) */
+				suscfg = gx_params->pci_suscfg|SUSMOD;
+			} else {
+				/* CS5530A,B.. */
+				suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
+			}
+			break;
+		case PCI_DEVICE_ID_CYRIX_5520:
+		case PCI_DEVICE_ID_CYRIX_5510:
+			suscfg = gx_params->pci_suscfg | SUSMOD;
+			break;
+		default:
+			local_irq_restore(flags);
+			pr_debug("fatal: try to set unknown chipset.\n");
+			return;
+		}
+	} else {
+		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+		gx_params->off_duration = 0;
+		gx_params->on_duration = 0;
+		pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
+	}
+
+	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
+	gx_write_byte(PCI_MODON, gx_params->on_duration);
+
+	gx_write_byte(PCI_SUSCFG, suscfg);
+	pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+	local_irq_restore(flags);
+
+	gx_params->pci_suscfg = suscfg;
+
+	cpufreq_freq_transition_end(policy, &freqs, 0);
+
+	pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+		gx_params->on_duration * 32, gx_params->off_duration * 32);
+	pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+}
+
+/****************************************************************
+ *             High level functions                             *
+ ****************************************************************/
+
+/*
+ *	cpufreq_gx_verify: test if frequency range is valid
+ *
+ *	This function checks if a given frequency range in kHz is valid
+ *      for the hardware supported by the driver.
+ */
+
+static int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+	unsigned int tmp_freq = 0;
+	u8 tmp1, tmp2;
+
+	if (!stock_freq || !policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
+
+	/* it needs to be assured that at least one supported frequency is
+	 * within policy->min and policy->max. If it is not, policy->max
+	 * needs to be increased until one frequency is supported.
+	 * policy->min may not be decreased, though. This way we guarantee a
+	 * specific processing capacity.
+	 */
+	tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
+	if (tmp_freq < policy->min)
+		tmp_freq += stock_freq / max_duration;
+	policy->min = tmp_freq;
+	if (policy->min > policy->max)
+		policy->max = tmp_freq;
+	tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
+	if (tmp_freq > policy->max)
+		tmp_freq -= stock_freq / max_duration;
+	policy->max = tmp_freq;
+	if (policy->max < policy->min)
+		policy->max = policy->min;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
+
+	return 0;
+}
+
+/*
+ *      cpufreq_gx_target:
+ *
+ */
+static int cpufreq_gx_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	u8 tmp1, tmp2;
+	unsigned int tmp_freq;
+
+	if (!stock_freq || !policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+
+	tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
+	while (tmp_freq < policy->min) {
+		tmp_freq += stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+	while (tmp_freq > policy->max) {
+		tmp_freq -= stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+
+	gx_set_cpuspeed(policy, tmp_freq);
+
+	return 0;
+}
+
+static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int maxfreq;
+
+	if (!policy || policy->cpu != 0)
+		return -ENODEV;
+
+	/* determine maximum frequency */
+	if (pci_busclk)
+		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+	else if (cpu_khz)
+		maxfreq = cpu_khz;
+	else
+		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+
+	stock_freq = maxfreq;
+
+	pr_debug("cpu max frequency is %d.\n", maxfreq);
+
+	/* setup basic struct for cpufreq API */
+	policy->cpu = 0;
+
+	if (max_duration < POLICY_MIN_DIV)
+		policy->min = maxfreq / max_duration;
+	else
+		policy->min = maxfreq / POLICY_MIN_DIV;
+	policy->max = maxfreq;
+	policy->cpuinfo.min_freq = maxfreq / max_duration;
+	policy->cpuinfo.max_freq = maxfreq;
+
+	return 0;
+}
+
+/*
+ * cpufreq_gx_init:
+ *   MediaGX/Geode GX initialize cpufreq driver
+ */
+static struct cpufreq_driver gx_suspmod_driver = {
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.get		= gx_get_cpuspeed,
+	.verify		= cpufreq_gx_verify,
+	.target		= cpufreq_gx_target,
+	.init		= cpufreq_gx_cpu_init,
+	.name		= "gx-suspmod",
+};
+
+static int __init cpufreq_gx_init(void)
+{
+	int ret;
+	struct gxfreq_params *params;
+	struct pci_dev *gx_pci;
+
+	/* Test if we have the right hardware */
+	gx_pci = gx_detect_chipset();
+	if (gx_pci == NULL)
+		return -ENODEV;
+
+	/* check whether module parameters are sane */
+	if (max_duration > 0xff)
+		max_duration = 0xff;
+
+	pr_debug("geode suspend modulation available.\n");
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (params == NULL)
+		return -ENOMEM;
+
+	params->cs55x0 = gx_pci;
+	gx_params = params;
+
+	/* keep cs55x0 configurations */
+	pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF,
+			&(params->off_duration));
+
+	ret = cpufreq_register_driver(&gx_suspmod_driver);
+	if (ret) {
+		kfree(params);
+		return ret;                   /* register error! */
+	}
+
+	return 0;
+}
+
+static void __exit cpufreq_gx_exit(void)
+{
+	cpufreq_unregister_driver(&gx_suspmod_driver);
+	pci_dev_put(gx_params->cs55x0);
+	kfree(gx_params);
+}
+
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/highbank-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/highbank-cpufreq.c
new file mode 100644
index 0000000..1608f71
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/highbank-cpufreq.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver provides the clk notifier callbacks that are used when
+ * the cpufreq-dt driver changes to frequency to alert the highbank
+ * EnergyCore Management Engine (ECME) about the need to change
+ * voltage. The ECME interfaces with the actual voltage regulators.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/pl320-ipc.h>
+#include <linux/platform_device.h>
+
+#define HB_CPUFREQ_CHANGE_NOTE	0x80000001
+#define HB_CPUFREQ_IPC_LEN	7
+#define HB_CPUFREQ_VOLT_RETRIES	15
+
+static int hb_voltage_change(unsigned int freq)
+{
+	u32 msg[HB_CPUFREQ_IPC_LEN] = {HB_CPUFREQ_CHANGE_NOTE, freq / 1000000};
+
+	return pl320_ipc_transmit(msg);
+}
+
+static int hb_cpufreq_clk_notify(struct notifier_block *nb,
+				unsigned long action, void *hclk)
+{
+	struct clk_notifier_data *clk_data = hclk;
+	int i = 0;
+
+	if (action == PRE_RATE_CHANGE) {
+		if (clk_data->new_rate > clk_data->old_rate)
+			while (hb_voltage_change(clk_data->new_rate))
+				if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+					return NOTIFY_BAD;
+	} else if (action == POST_RATE_CHANGE) {
+		if (clk_data->new_rate < clk_data->old_rate)
+			while (hb_voltage_change(clk_data->new_rate))
+				if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+					return NOTIFY_BAD;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block hb_cpufreq_clk_nb = {
+	.notifier_call = hb_cpufreq_clk_notify,
+};
+
+static int hb_cpufreq_driver_init(void)
+{
+	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
+	struct device *cpu_dev;
+	struct clk *cpu_clk;
+	struct device_node *np;
+	int ret;
+
+	if ((!of_machine_is_compatible("calxeda,highbank")) &&
+		(!of_machine_is_compatible("calxeda,ecx-2000")))
+		return -ENODEV;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("failed to get highbank cpufreq device\n");
+		return -ENODEV;
+	}
+
+	np = of_node_get(cpu_dev->of_node);
+	if (!np) {
+		pr_err("failed to find highbank cpufreq node\n");
+		return -ENOENT;
+	}
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		pr_err("failed to get cpu0 clock: %d\n", ret);
+		goto out_put_node;
+	}
+
+	ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
+	if (ret) {
+		pr_err("failed to register clk notifier: %d\n", ret);
+		goto out_put_node;
+	}
+
+	/* Instantiate cpufreq-dt */
+	platform_device_register_full(&devinfo);
+
+out_put_node:
+	of_node_put(np);
+	return ret;
+}
+module_init(hb_cpufreq_driver_init);
+
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
+MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ia64-acpi-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/ia64-acpi-cpufreq.c
new file mode 100644
index 0000000..a757c0a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -0,0 +1,362 @@
+/*
+ * This file provides the ACPI based P-state support. This
+ * module works with generic cpufreq infrastructure. Most of
+ * the code is based on i386 version
+ * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c)
+ *
+ * Copyright (C) 2005 Intel Corp
+ *      Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/pal.h>
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+MODULE_AUTHOR("Venkatesh Pallipadi");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+
+struct cpufreq_acpi_io {
+	struct acpi_processor_performance	acpi_data;
+	unsigned int				resume;
+};
+
+struct cpufreq_acpi_req {
+	unsigned int		cpu;
+	unsigned int		state;
+};
+
+static struct cpufreq_acpi_io	*acpi_io_data[NR_CPUS];
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+
+static int
+processor_set_pstate (
+	u32	value)
+{
+	s64 retval;
+
+	pr_debug("processor_set_pstate\n");
+
+	retval = ia64_pal_set_pstate((u64)value);
+
+	if (retval) {
+		pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n",
+		        value, retval);
+		return -ENODEV;
+	}
+	return (int)retval;
+}
+
+
+static int
+processor_get_pstate (
+	u32	*value)
+{
+	u64	pstate_index = 0;
+	s64 	retval;
+
+	pr_debug("processor_get_pstate\n");
+
+	retval = ia64_pal_get_pstate(&pstate_index,
+	                             PAL_GET_PSTATE_TYPE_INSTANT);
+	*value = (u32) pstate_index;
+
+	if (retval)
+		pr_debug("Failed to get current freq with "
+			"error 0x%lx, idx 0x%x\n", retval, *value);
+
+	return (int)retval;
+}
+
+
+/* To be used only after data->acpi_data is initialized */
+static unsigned
+extract_clock (
+	struct cpufreq_acpi_io *data,
+	unsigned value)
+{
+	unsigned long i;
+
+	pr_debug("extract_clock\n");
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		if (value == data->acpi_data.states[i].status)
+			return data->acpi_data.states[i].core_frequency;
+	}
+	return data->acpi_data.states[i-1].core_frequency;
+}
+
+
+static long
+processor_get_freq (
+	void *arg)
+{
+	struct cpufreq_acpi_req *req = arg;
+	unsigned int		cpu = req->cpu;
+	struct cpufreq_acpi_io	*data = acpi_io_data[cpu];
+	u32			value;
+	int			ret;
+
+	pr_debug("processor_get_freq\n");
+	if (smp_processor_id() != cpu)
+		return -EAGAIN;
+
+	/* processor_get_pstate gets the instantaneous frequency */
+	ret = processor_get_pstate(&value);
+	if (ret) {
+		pr_warn("get performance failed with error %d\n", ret);
+		return ret;
+	}
+	return 1000 * extract_clock(data, value);
+}
+
+
+static long
+processor_set_freq (
+	void *arg)
+{
+	struct cpufreq_acpi_req *req = arg;
+	unsigned int		cpu = req->cpu;
+	struct cpufreq_acpi_io	*data = acpi_io_data[cpu];
+	int			ret, state = req->state;
+	u32			value;
+
+	pr_debug("processor_set_freq\n");
+	if (smp_processor_id() != cpu)
+		return -EAGAIN;
+
+	if (state == data->acpi_data.state) {
+		if (unlikely(data->resume)) {
+			pr_debug("Called after resume, resetting to P%d\n", state);
+			data->resume = 0;
+		} else {
+			pr_debug("Already at target state (P%d)\n", state);
+			return 0;
+		}
+	}
+
+	pr_debug("Transitioning from P%d to P%d\n",
+		data->acpi_data.state, state);
+
+	/*
+	 * First we write the target state's 'control' value to the
+	 * control_register.
+	 */
+	value = (u32) data->acpi_data.states[state].control;
+
+	pr_debug("Transitioning to state: 0x%08x\n", value);
+
+	ret = processor_set_pstate(value);
+	if (ret) {
+		pr_warn("Transition failed with error %d\n", ret);
+		return -ENODEV;
+	}
+
+	data->acpi_data.state = state;
+	return 0;
+}
+
+
+static unsigned int
+acpi_cpufreq_get (
+	unsigned int		cpu)
+{
+	struct cpufreq_acpi_req req;
+	long ret;
+
+	req.cpu = cpu;
+	ret = work_on_cpu(cpu, processor_get_freq, &req);
+
+	return ret > 0 ? (unsigned int) ret : 0;
+}
+
+
+static int
+acpi_cpufreq_target (
+	struct cpufreq_policy   *policy,
+	unsigned int index)
+{
+	struct cpufreq_acpi_req req;
+
+	req.cpu = policy->cpu;
+	req.state = index;
+
+	return work_on_cpu(req.cpu, processor_set_freq, &req);
+}
+
+static int
+acpi_cpufreq_cpu_init (
+	struct cpufreq_policy   *policy)
+{
+	unsigned int		i;
+	unsigned int		cpu = policy->cpu;
+	struct cpufreq_acpi_io	*data;
+	unsigned int		result = 0;
+	struct cpufreq_frequency_table *freq_table;
+
+	pr_debug("acpi_cpufreq_cpu_init\n");
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return (-ENOMEM);
+
+	acpi_io_data[cpu] = data;
+
+	result = acpi_processor_register_performance(&data->acpi_data, cpu);
+
+	if (result)
+		goto err_free;
+
+	/* capability check */
+	if (data->acpi_data.state_count <= 1) {
+		pr_debug("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	if ((data->acpi_data.control_register.space_id !=
+					ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (data->acpi_data.status_register.space_id !=
+					ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		pr_debug("Unsupported address space [%d, %d]\n",
+			(u32) (data->acpi_data.control_register.space_id),
+			(u32) (data->acpi_data.status_register.space_id));
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	/* alloc freq_table */
+	freq_table = kzalloc(sizeof(*freq_table) *
+	                           (data->acpi_data.state_count + 1),
+	                           GFP_KERNEL);
+	if (!freq_table) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+
+	/* detect transition latency */
+	policy->cpuinfo.transition_latency = 0;
+	for (i=0; i<data->acpi_data.state_count; i++) {
+		if ((data->acpi_data.states[i].transition_latency * 1000) >
+		    policy->cpuinfo.transition_latency) {
+			policy->cpuinfo.transition_latency =
+			    data->acpi_data.states[i].transition_latency * 1000;
+		}
+	}
+
+	/* table init */
+	for (i = 0; i <= data->acpi_data.state_count; i++)
+	{
+		if (i < data->acpi_data.state_count) {
+			freq_table[i].frequency =
+			      data->acpi_data.states[i].core_frequency * 1000;
+		} else {
+			freq_table[i].frequency = CPUFREQ_TABLE_END;
+		}
+	}
+
+	result = cpufreq_table_validate_and_show(policy, freq_table);
+	if (result) {
+		goto err_freqfree;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	pr_info("CPU%u - ACPI performance management activated\n", cpu);
+
+	for (i = 0; i < data->acpi_data.state_count; i++)
+		pr_debug("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
+			(i == data->acpi_data.state?'*':' '), i,
+			(u32) data->acpi_data.states[i].core_frequency,
+			(u32) data->acpi_data.states[i].power,
+			(u32) data->acpi_data.states[i].transition_latency,
+			(u32) data->acpi_data.states[i].bus_master_latency,
+			(u32) data->acpi_data.states[i].status,
+			(u32) data->acpi_data.states[i].control);
+
+	/* the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers. */
+	data->resume = 1;
+
+	return (result);
+
+ err_freqfree:
+	kfree(freq_table);
+ err_unreg:
+	acpi_processor_unregister_performance(cpu);
+ err_free:
+	kfree(data);
+	acpi_io_data[cpu] = NULL;
+
+	return (result);
+}
+
+
+static int
+acpi_cpufreq_cpu_exit (
+	struct cpufreq_policy   *policy)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+	pr_debug("acpi_cpufreq_cpu_exit\n");
+
+	if (data) {
+		acpi_io_data[policy->cpu] = NULL;
+		acpi_processor_unregister_performance(policy->cpu);
+		kfree(policy->freq_table);
+		kfree(data);
+	}
+
+	return (0);
+}
+
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+	.verify 	= cpufreq_generic_frequency_table_verify,
+	.target_index	= acpi_cpufreq_target,
+	.get 		= acpi_cpufreq_get,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.name		= "acpi-cpufreq",
+	.attr		= cpufreq_generic_attr,
+};
+
+
+static int __init
+acpi_cpufreq_init (void)
+{
+	pr_debug("acpi_cpufreq_init\n");
+
+ 	return cpufreq_register_driver(&acpi_cpufreq_driver);
+}
+
+
+static void __exit
+acpi_cpufreq_exit (void)
+{
+	pr_debug("acpi_cpufreq_exit\n");
+
+	cpufreq_unregister_driver(&acpi_cpufreq_driver);
+	return;
+}
+
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/imx6q-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/imx6q-cpufreq.c
new file mode 100644
index 0000000..63d2832
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/imx6q-cpufreq.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define PU_SOC_VOLTAGE_NORMAL	1250000
+#define PU_SOC_VOLTAGE_HIGH	1275000
+#define FREQ_1P2_GHZ		1200000000
+
+static struct regulator *arm_reg;
+static struct regulator *pu_reg;
+static struct regulator *soc_reg;
+
+static struct clk *arm_clk;
+static struct clk *pll1_sys_clk;
+static struct clk *pll1_sw_clk;
+static struct clk *step_clk;
+static struct clk *pll2_pfd2_396m_clk;
+
+/* clk used by i.MX6UL */
+static struct clk *pll2_bus_clk;
+static struct clk *secondary_sel_clk;
+
+static struct device *cpu_dev;
+static bool free_opp;
+static struct cpufreq_frequency_table *freq_table;
+static unsigned int transition_latency;
+
+static u32 *imx6_soc_volt;
+static u32 soc_opp_count;
+
+static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	struct dev_pm_opp *opp;
+	unsigned long freq_hz, volt, volt_old;
+	unsigned int old_freq, new_freq;
+	bool pll1_sys_temp_enabled = false;
+	int ret;
+
+	new_freq = freq_table[index].frequency;
+	freq_hz = new_freq * 1000;
+	old_freq = clk_get_rate(arm_clk) / 1000;
+
+	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
+	if (IS_ERR(opp)) {
+		dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
+		return PTR_ERR(opp);
+	}
+
+	volt = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	volt_old = regulator_get_voltage(arm_reg);
+
+	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
+		old_freq / 1000, volt_old / 1000,
+		new_freq / 1000, volt / 1000);
+
+	/* scaling up?  scale voltage before frequency */
+	if (new_freq > old_freq) {
+		if (!IS_ERR(pu_reg)) {
+			ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+			if (ret) {
+				dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
+				return ret;
+			}
+		}
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
+			return ret;
+		}
+		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
+		if (ret) {
+			dev_err(cpu_dev,
+				"failed to scale vddarm up: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/*
+	 * The setpoints are selected per PLL/PDF frequencies, so we need to
+	 * reprogram PLL for frequency scaling.  The procedure of reprogramming
+	 * PLL1 is as below.
+	 * For i.MX6UL, it has a secondary clk mux, the cpu frequency change
+	 * flow is slightly different from other i.MX6 OSC.
+	 * The cpu frequeny change flow for i.MX6(except i.MX6UL) is as below:
+	 *  - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it
+	 *  - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
+	 *  - Disable pll2_pfd2_396m_clk
+	 */
+	if (of_machine_is_compatible("fsl,imx6ul") ||
+	    of_machine_is_compatible("fsl,imx6ull")) {
+		/*
+		 * When changing pll1_sw_clk's parent to pll1_sys_clk,
+		 * CPU may run at higher than 528MHz, this will lead to
+		 * the system unstable if the voltage is lower than the
+		 * voltage of 528MHz, so lower the CPU frequency to one
+		 * half before changing CPU frequency.
+		 */
+		clk_set_rate(arm_clk, (old_freq >> 1) * 1000);
+		clk_set_parent(pll1_sw_clk, pll1_sys_clk);
+		if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk))
+			clk_set_parent(secondary_sel_clk, pll2_bus_clk);
+		else
+			clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk);
+		clk_set_parent(step_clk, secondary_sel_clk);
+		clk_set_parent(pll1_sw_clk, step_clk);
+	} else {
+		clk_set_parent(step_clk, pll2_pfd2_396m_clk);
+		clk_set_parent(pll1_sw_clk, step_clk);
+		if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
+			clk_set_rate(pll1_sys_clk, new_freq * 1000);
+			clk_set_parent(pll1_sw_clk, pll1_sys_clk);
+		} else {
+			/* pll1_sys needs to be enabled for divider rate change to work. */
+			pll1_sys_temp_enabled = true;
+			clk_prepare_enable(pll1_sys_clk);
+		}
+	}
+
+	/* Ensure the arm clock divider is what we expect */
+	ret = clk_set_rate(arm_clk, new_freq * 1000);
+	if (ret) {
+		int ret1;
+
+		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
+		ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
+		if (ret1)
+			dev_warn(cpu_dev,
+				 "failed to restore vddarm voltage: %d\n", ret1);
+		return ret;
+	}
+
+	/* PLL1 is only needed until after ARM-PODF is set. */
+	if (pll1_sys_temp_enabled)
+		clk_disable_unprepare(pll1_sys_clk);
+
+	/* scaling down?  scale voltage after frequency */
+	if (new_freq < old_freq) {
+		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
+		if (ret) {
+			dev_warn(cpu_dev,
+				 "failed to scale vddarm down: %d\n", ret);
+			ret = 0;
+		}
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
+			ret = 0;
+		}
+		if (!IS_ERR(pu_reg)) {
+			ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+			if (ret) {
+				dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
+				ret = 0;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	policy->clk = arm_clk;
+	ret = cpufreq_generic_init(policy, freq_table, transition_latency);
+	policy->suspend_freq = policy->max;
+
+	return ret;
+}
+
+static struct cpufreq_driver imx6q_cpufreq_driver = {
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = imx6q_set_target,
+	.get = cpufreq_generic_get,
+	.init = imx6q_cpufreq_init,
+	.name = "imx6q-cpufreq",
+	.attr = cpufreq_generic_attr,
+	.suspend = cpufreq_generic_suspend,
+};
+
+static int imx6q_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	struct dev_pm_opp *opp;
+	unsigned long min_volt, max_volt;
+	int num, ret;
+	const struct property *prop;
+	const __be32 *val;
+	u32 nr, i, j;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu0 device\n");
+		return -ENODEV;
+	}
+
+	np = of_node_get(cpu_dev->of_node);
+	if (!np) {
+		dev_err(cpu_dev, "failed to find cpu0 node\n");
+		return -ENOENT;
+	}
+
+	arm_clk = clk_get(cpu_dev, "arm");
+	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
+	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
+	step_clk = clk_get(cpu_dev, "step");
+	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
+	if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
+	    IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
+		dev_err(cpu_dev, "failed to get clocks\n");
+		ret = -ENOENT;
+		goto put_clk;
+	}
+
+	if (of_machine_is_compatible("fsl,imx6ul") ||
+	    of_machine_is_compatible("fsl,imx6ull")) {
+		pll2_bus_clk = clk_get(cpu_dev, "pll2_bus");
+		secondary_sel_clk = clk_get(cpu_dev, "secondary_sel");
+		if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) {
+			dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n");
+			ret = -ENOENT;
+			goto put_clk;
+		}
+	}
+
+	arm_reg = regulator_get(cpu_dev, "arm");
+	pu_reg = regulator_get_optional(cpu_dev, "pu");
+	soc_reg = regulator_get(cpu_dev, "soc");
+	if (PTR_ERR(arm_reg) == -EPROBE_DEFER ||
+			PTR_ERR(soc_reg) == -EPROBE_DEFER ||
+			PTR_ERR(pu_reg) == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		dev_dbg(cpu_dev, "regulators not ready, defer\n");
+		goto put_reg;
+	}
+	if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) {
+		dev_err(cpu_dev, "failed to get regulators\n");
+		ret = -ENOENT;
+		goto put_reg;
+	}
+
+	/*
+	 * We expect an OPP table supplied by platform.
+	 * Just, incase the platform did not supply the OPP
+	 * table, it will try to get it.
+	 */
+	num = dev_pm_opp_get_opp_count(cpu_dev);
+	if (num < 0) {
+		ret = dev_pm_opp_of_add_table(cpu_dev);
+		if (ret < 0) {
+			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
+			goto put_reg;
+		}
+
+		/* Because we have added the OPPs here, we must free them */
+		free_opp = true;
+
+		num = dev_pm_opp_get_opp_count(cpu_dev);
+		if (num < 0) {
+			ret = num;
+			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
+			goto out_free_opp;
+		}
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+		goto out_free_opp;
+	}
+
+	/* Make imx6_soc_volt array's size same as arm opp number */
+	imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL);
+	if (imx6_soc_volt == NULL) {
+		ret = -ENOMEM;
+		goto free_freq_table;
+	}
+
+	prop = of_find_property(np, "fsl,soc-operating-points", NULL);
+	if (!prop || !prop->value)
+		goto soc_opp_out;
+
+	/*
+	 * Each OPP is a set of tuples consisting of frequency and
+	 * voltage like <freq-kHz vol-uV>.
+	 */
+	nr = prop->length / sizeof(u32);
+	if (nr % 2 || (nr / 2) < num)
+		goto soc_opp_out;
+
+	for (j = 0; j < num; j++) {
+		val = prop->value;
+		for (i = 0; i < nr / 2; i++) {
+			unsigned long freq = be32_to_cpup(val++);
+			unsigned long volt = be32_to_cpup(val++);
+			if (freq_table[j].frequency == freq) {
+				imx6_soc_volt[soc_opp_count++] = volt;
+				break;
+			}
+		}
+	}
+
+soc_opp_out:
+	/* use fixed soc opp volt if no valid soc opp info found in dtb */
+	if (soc_opp_count != num) {
+		dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
+		for (j = 0; j < num; j++)
+			imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
+		if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
+			imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
+	}
+
+	if (of_property_read_u32(np, "clock-latency", &transition_latency))
+		transition_latency = CPUFREQ_ETERNAL;
+
+	/*
+	 * Calculate the ramp time for max voltage change in the
+	 * VDDSOC and VDDPU regulators.
+	 */
+	ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+	if (!IS_ERR(pu_reg)) {
+		ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+		if (ret > 0)
+			transition_latency += ret * 1000;
+	}
+
+	/*
+	 * OPP is maintained in order of increasing frequency, and
+	 * freq_table initialised from OPP is therefore sorted in the
+	 * same order.
+	 */
+	opp = dev_pm_opp_find_freq_exact(cpu_dev,
+				  freq_table[0].frequency * 1000, true);
+	min_volt = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+	opp = dev_pm_opp_find_freq_exact(cpu_dev,
+				  freq_table[--num].frequency * 1000, true);
+	max_volt = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+
+	ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
+	if (ret) {
+		dev_err(cpu_dev, "failed register driver: %d\n", ret);
+		goto free_freq_table;
+	}
+
+	of_node_put(np);
+	return 0;
+
+free_freq_table:
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_opp:
+	if (free_opp)
+		dev_pm_opp_of_remove_table(cpu_dev);
+put_reg:
+	if (!IS_ERR(arm_reg))
+		regulator_put(arm_reg);
+	if (!IS_ERR(pu_reg))
+		regulator_put(pu_reg);
+	if (!IS_ERR(soc_reg))
+		regulator_put(soc_reg);
+put_clk:
+	if (!IS_ERR(arm_clk))
+		clk_put(arm_clk);
+	if (!IS_ERR(pll1_sys_clk))
+		clk_put(pll1_sys_clk);
+	if (!IS_ERR(pll1_sw_clk))
+		clk_put(pll1_sw_clk);
+	if (!IS_ERR(step_clk))
+		clk_put(step_clk);
+	if (!IS_ERR(pll2_pfd2_396m_clk))
+		clk_put(pll2_pfd2_396m_clk);
+	if (!IS_ERR(pll2_bus_clk))
+		clk_put(pll2_bus_clk);
+	if (!IS_ERR(secondary_sel_clk))
+		clk_put(secondary_sel_clk);
+	of_node_put(np);
+	return ret;
+}
+
+static int imx6q_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+	if (free_opp)
+		dev_pm_opp_of_remove_table(cpu_dev);
+	regulator_put(arm_reg);
+	if (!IS_ERR(pu_reg))
+		regulator_put(pu_reg);
+	regulator_put(soc_reg);
+	clk_put(arm_clk);
+	clk_put(pll1_sys_clk);
+	clk_put(pll1_sw_clk);
+	clk_put(step_clk);
+	clk_put(pll2_pfd2_396m_clk);
+	clk_put(pll2_bus_clk);
+	clk_put(secondary_sel_clk);
+
+	return 0;
+}
+
+static struct platform_driver imx6q_cpufreq_platdrv = {
+	.driver = {
+		.name	= "imx6q-cpufreq",
+	},
+	.probe		= imx6q_cpufreq_probe,
+	.remove		= imx6q_cpufreq_remove,
+};
+module_platform_driver(imx6q_cpufreq_platdrv);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/intel_pstate.c b/src/kernel/linux/v4.14/drivers/cpufreq/intel_pstate.c
new file mode 100644
index 0000000..be1a7bb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/intel_pstate.c
@@ -0,0 +1,2403 @@
+/*
+ * intel_pstate.c: Native P state management for Intel processors
+ *
+ * (C) Copyright 2012 Intel Corporation
+ * Author: Dirk Brandewie <dirk.j.brandewie@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/slab.h>
+#include <linux/sched/cpufreq.h>
+#include <linux/list.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/acpi.h>
+#include <linux/vmalloc.h>
+#include <trace/events/power.h>
+
+#include <asm/div64.h>
+#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
+#include <asm/cpufeature.h>
+#include <asm/intel-family.h>
+
+#define INTEL_PSTATE_SAMPLING_INTERVAL	(10 * NSEC_PER_MSEC)
+
+#define INTEL_CPUFREQ_TRANSITION_LATENCY	20000
+#define INTEL_CPUFREQ_TRANSITION_DELAY		500
+
+#ifdef CONFIG_ACPI
+#include <acpi/processor.h>
+#include <acpi/cppc_acpi.h>
+#endif
+
+#define FRAC_BITS 8
+#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
+#define fp_toint(X) ((X) >> FRAC_BITS)
+
+#define EXT_BITS 6
+#define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS)
+#define fp_ext_toint(X) ((X) >> EXT_FRAC_BITS)
+#define int_ext_tofp(X) ((int64_t)(X) << EXT_FRAC_BITS)
+
+static inline int32_t mul_fp(int32_t x, int32_t y)
+{
+	return ((int64_t)x * (int64_t)y) >> FRAC_BITS;
+}
+
+static inline int32_t div_fp(s64 x, s64 y)
+{
+	return div64_s64((int64_t)x << FRAC_BITS, y);
+}
+
+static inline int ceiling_fp(int32_t x)
+{
+	int mask, ret;
+
+	ret = fp_toint(x);
+	mask = (1 << FRAC_BITS) - 1;
+	if (x & mask)
+		ret += 1;
+	return ret;
+}
+
+static inline int32_t percent_fp(int percent)
+{
+	return div_fp(percent, 100);
+}
+
+static inline u64 mul_ext_fp(u64 x, u64 y)
+{
+	return (x * y) >> EXT_FRAC_BITS;
+}
+
+static inline u64 div_ext_fp(u64 x, u64 y)
+{
+	return div64_u64(x << EXT_FRAC_BITS, y);
+}
+
+static inline int32_t percent_ext_fp(int percent)
+{
+	return div_ext_fp(percent, 100);
+}
+
+/**
+ * struct sample -	Store performance sample
+ * @core_avg_perf:	Ratio of APERF/MPERF which is the actual average
+ *			performance during last sample period
+ * @busy_scaled:	Scaled busy value which is used to calculate next
+ *			P state. This can be different than core_avg_perf
+ *			to account for cpu idle period
+ * @aperf:		Difference of actual performance frequency clock count
+ *			read from APERF MSR between last and current sample
+ * @mperf:		Difference of maximum performance frequency clock count
+ *			read from MPERF MSR between last and current sample
+ * @tsc:		Difference of time stamp counter between last and
+ *			current sample
+ * @time:		Current time from scheduler
+ *
+ * This structure is used in the cpudata structure to store performance sample
+ * data for choosing next P State.
+ */
+struct sample {
+	int32_t core_avg_perf;
+	int32_t busy_scaled;
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+	u64 time;
+};
+
+/**
+ * struct pstate_data - Store P state data
+ * @current_pstate:	Current requested P state
+ * @min_pstate:		Min P state possible for this platform
+ * @max_pstate:		Max P state possible for this platform
+ * @max_pstate_physical:This is physical Max P state for a processor
+ *			This can be higher than the max_pstate which can
+ *			be limited by platform thermal design power limits
+ * @scaling:		Scaling factor to  convert frequency to cpufreq
+ *			frequency units
+ * @turbo_pstate:	Max Turbo P state possible for this platform
+ * @max_freq:		@max_pstate frequency in cpufreq units
+ * @turbo_freq:		@turbo_pstate frequency in cpufreq units
+ *
+ * Stores the per cpu model P state limits and current P state.
+ */
+struct pstate_data {
+	int	current_pstate;
+	int	min_pstate;
+	int	max_pstate;
+	int	max_pstate_physical;
+	int	scaling;
+	int	turbo_pstate;
+	unsigned int max_freq;
+	unsigned int turbo_freq;
+};
+
+/**
+ * struct vid_data -	Stores voltage information data
+ * @min:		VID data for this platform corresponding to
+ *			the lowest P state
+ * @max:		VID data corresponding to the highest P State.
+ * @turbo:		VID data for turbo P state
+ * @ratio:		Ratio of (vid max - vid min) /
+ *			(max P state - Min P State)
+ *
+ * Stores the voltage data for DVFS (Dynamic Voltage and Frequency Scaling)
+ * This data is used in Atom platforms, where in addition to target P state,
+ * the voltage data needs to be specified to select next P State.
+ */
+struct vid_data {
+	int min;
+	int max;
+	int turbo;
+	int32_t ratio;
+};
+
+/**
+ * struct global_params - Global parameters, mostly tunable via sysfs.
+ * @no_turbo:		Whether or not to use turbo P-states.
+ * @turbo_disabled:	Whethet or not turbo P-states are available at all,
+ *			based on the MSR_IA32_MISC_ENABLE value and whether or
+ *			not the maximum reported turbo P-state is different from
+ *			the maximum reported non-turbo one.
+ * @min_perf_pct:	Minimum capacity limit in percent of the maximum turbo
+ *			P-state capacity.
+ * @max_perf_pct:	Maximum capacity limit in percent of the maximum turbo
+ *			P-state capacity.
+ */
+struct global_params {
+	bool no_turbo;
+	bool turbo_disabled;
+	int max_perf_pct;
+	int min_perf_pct;
+};
+
+/**
+ * struct cpudata -	Per CPU instance data storage
+ * @cpu:		CPU number for this instance data
+ * @policy:		CPUFreq policy value
+ * @update_util:	CPUFreq utility callback information
+ * @update_util_set:	CPUFreq utility callback is set
+ * @iowait_boost:	iowait-related boost fraction
+ * @last_update:	Time of the last update.
+ * @pstate:		Stores P state limits for this CPU
+ * @vid:		Stores VID limits for this CPU
+ * @last_sample_time:	Last Sample time
+ * @aperf_mperf_shift:	Number of clock cycles after aperf, merf is incremented
+ *			This shift is a multiplier to mperf delta to
+ *			calculate CPU busy.
+ * @prev_aperf:		Last APERF value read from APERF MSR
+ * @prev_mperf:		Last MPERF value read from MPERF MSR
+ * @prev_tsc:		Last timestamp counter (TSC) value
+ * @prev_cummulative_iowait: IO Wait time difference from last and
+ *			current sample
+ * @sample:		Storage for storing last Sample data
+ * @min_perf_ratio:	Minimum capacity in terms of PERF or HWP ratios
+ * @max_perf_ratio:	Maximum capacity in terms of PERF or HWP ratios
+ * @acpi_perf_data:	Stores ACPI perf information read from _PSS
+ * @valid_pss_table:	Set to true for valid ACPI _PSS entries found
+ * @epp_powersave:	Last saved HWP energy performance preference
+ *			(EPP) or energy performance bias (EPB),
+ *			when policy switched to performance
+ * @epp_policy:		Last saved policy used to set EPP/EPB
+ * @epp_default:	Power on default HWP energy performance
+ *			preference/bias
+ * @epp_saved:		Saved EPP/EPB during system suspend or CPU offline
+ *			operation
+ *
+ * This structure stores per CPU instance data for all CPUs.
+ */
+struct cpudata {
+	int cpu;
+
+	unsigned int policy;
+	struct update_util_data update_util;
+	bool   update_util_set;
+
+	struct pstate_data pstate;
+	struct vid_data vid;
+
+	u64	last_update;
+	u64	last_sample_time;
+	u64	aperf_mperf_shift;
+	u64	prev_aperf;
+	u64	prev_mperf;
+	u64	prev_tsc;
+	u64	prev_cummulative_iowait;
+	struct sample sample;
+	int32_t	min_perf_ratio;
+	int32_t	max_perf_ratio;
+#ifdef CONFIG_ACPI
+	struct acpi_processor_performance acpi_perf_data;
+	bool valid_pss_table;
+#endif
+	unsigned int iowait_boost;
+	s16 epp_powersave;
+	s16 epp_policy;
+	s16 epp_default;
+	s16 epp_saved;
+};
+
+static struct cpudata **all_cpu_data;
+
+/**
+ * struct pstate_funcs - Per CPU model specific callbacks
+ * @get_max:		Callback to get maximum non turbo effective P state
+ * @get_max_physical:	Callback to get maximum non turbo physical P state
+ * @get_min:		Callback to get minimum P state
+ * @get_turbo:		Callback to get turbo P state
+ * @get_scaling:	Callback to get frequency scaling factor
+ * @get_val:		Callback to convert P state to actual MSR write value
+ * @get_vid:		Callback to get VID data for Atom platforms
+ *
+ * Core and Atom CPU models have different way to get P State limits. This
+ * structure is used to store those callbacks.
+ */
+struct pstate_funcs {
+	int (*get_max)(void);
+	int (*get_max_physical)(void);
+	int (*get_min)(void);
+	int (*get_turbo)(void);
+	int (*get_scaling)(void);
+	int (*get_aperf_mperf_shift)(void);
+	u64 (*get_val)(struct cpudata*, int pstate);
+	void (*get_vid)(struct cpudata *);
+};
+
+static struct pstate_funcs pstate_funcs __read_mostly;
+
+static int hwp_active __read_mostly;
+static int hwp_mode_bdw __read_mostly;
+static bool per_cpu_limits __read_mostly;
+
+static struct cpufreq_driver *intel_pstate_driver __read_mostly;
+
+#ifdef CONFIG_ACPI
+static bool acpi_ppc;
+#endif
+
+static struct global_params global;
+
+static DEFINE_MUTEX(intel_pstate_driver_lock);
+static DEFINE_MUTEX(intel_pstate_limits_lock);
+
+#ifdef CONFIG_ACPI
+
+static bool intel_pstate_get_ppc_enable_status(void)
+{
+	if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER ||
+	    acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER)
+		return true;
+
+	return acpi_ppc;
+}
+
+#ifdef CONFIG_ACPI_CPPC_LIB
+
+/* The work item is needed to avoid CPU hotplug locking issues */
+static void intel_pstste_sched_itmt_work_fn(struct work_struct *work)
+{
+	sched_set_itmt_support();
+}
+
+static DECLARE_WORK(sched_itmt_work, intel_pstste_sched_itmt_work_fn);
+
+static void intel_pstate_set_itmt_prio(int cpu)
+{
+	struct cppc_perf_caps cppc_perf;
+	static u32 max_highest_perf = 0, min_highest_perf = U32_MAX;
+	int ret;
+
+	ret = cppc_get_perf_caps(cpu, &cppc_perf);
+	if (ret)
+		return;
+
+	/*
+	 * The priorities can be set regardless of whether or not
+	 * sched_set_itmt_support(true) has been called and it is valid to
+	 * update them at any time after it has been called.
+	 */
+	sched_set_itmt_core_prio(cppc_perf.highest_perf, cpu);
+
+	if (max_highest_perf <= min_highest_perf) {
+		if (cppc_perf.highest_perf > max_highest_perf)
+			max_highest_perf = cppc_perf.highest_perf;
+
+		if (cppc_perf.highest_perf < min_highest_perf)
+			min_highest_perf = cppc_perf.highest_perf;
+
+		if (max_highest_perf > min_highest_perf) {
+			/*
+			 * This code can be run during CPU online under the
+			 * CPU hotplug locks, so sched_set_itmt_support()
+			 * cannot be called from here.  Queue up a work item
+			 * to invoke it.
+			 */
+			schedule_work(&sched_itmt_work);
+		}
+	}
+}
+#else
+static void intel_pstate_set_itmt_prio(int cpu)
+{
+}
+#endif
+
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+	int ret;
+	int i;
+
+	if (hwp_active) {
+		intel_pstate_set_itmt_prio(policy->cpu);
+		return;
+	}
+
+	if (!intel_pstate_get_ppc_enable_status())
+		return;
+
+	cpu = all_cpu_data[policy->cpu];
+
+	ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
+						  policy->cpu);
+	if (ret)
+		return;
+
+	/*
+	 * Check if the control value in _PSS is for PERF_CTL MSR, which should
+	 * guarantee that the states returned by it map to the states in our
+	 * list directly.
+	 */
+	if (cpu->acpi_perf_data.control_register.space_id !=
+						ACPI_ADR_SPACE_FIXED_HARDWARE)
+		goto err;
+
+	/*
+	 * If there is only one entry _PSS, simply ignore _PSS and continue as
+	 * usual without taking _PSS into account
+	 */
+	if (cpu->acpi_perf_data.state_count < 2)
+		goto err;
+
+	pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu);
+	for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
+		pr_debug("     %cP%d: %u MHz, %u mW, 0x%x\n",
+			 (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
+			 (u32) cpu->acpi_perf_data.states[i].core_frequency,
+			 (u32) cpu->acpi_perf_data.states[i].power,
+			 (u32) cpu->acpi_perf_data.states[i].control);
+	}
+
+	/*
+	 * The _PSS table doesn't contain whole turbo frequency range.
+	 * This just contains +1 MHZ above the max non turbo frequency,
+	 * with control value corresponding to max turbo ratio. But
+	 * when cpufreq set policy is called, it will call with this
+	 * max frequency, which will cause a reduced performance as
+	 * this driver uses real max turbo frequency as the max
+	 * frequency. So correct this frequency in _PSS table to
+	 * correct max turbo frequency based on the turbo state.
+	 * Also need to convert to MHz as _PSS freq is in MHz.
+	 */
+	if (!global.turbo_disabled)
+		cpu->acpi_perf_data.states[0].core_frequency =
+					policy->cpuinfo.max_freq / 1000;
+	cpu->valid_pss_table = true;
+	pr_debug("_PPC limits will be enforced\n");
+
+	return;
+
+ err:
+	cpu->valid_pss_table = false;
+	acpi_processor_unregister_performance(policy->cpu);
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+
+	cpu = all_cpu_data[policy->cpu];
+	if (!cpu->valid_pss_table)
+		return;
+
+	acpi_processor_unregister_performance(policy->cpu);
+}
+#else
+static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+}
+
+static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+}
+#endif
+
+static inline void update_turbo_state(void)
+{
+	u64 misc_en;
+	struct cpudata *cpu;
+
+	cpu = all_cpu_data[0];
+	rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
+	global.turbo_disabled =
+		(misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
+		 cpu->pstate.max_pstate == cpu->pstate.turbo_pstate);
+}
+
+static int min_perf_pct_min(void)
+{
+	struct cpudata *cpu = all_cpu_data[0];
+	int turbo_pstate = cpu->pstate.turbo_pstate;
+
+	return turbo_pstate ?
+		(cpu->pstate.min_pstate * 100 / turbo_pstate) : 0;
+}
+
+static s16 intel_pstate_get_epb(struct cpudata *cpu_data)
+{
+	u64 epb;
+	int ret;
+
+	if (!static_cpu_has(X86_FEATURE_EPB))
+		return -ENXIO;
+
+	ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb);
+	if (ret)
+		return (s16)ret;
+
+	return (s16)(epb & 0x0f);
+}
+
+static s16 intel_pstate_get_epp(struct cpudata *cpu_data, u64 hwp_req_data)
+{
+	s16 epp;
+
+	if (static_cpu_has(X86_FEATURE_HWP_EPP)) {
+		/*
+		 * When hwp_req_data is 0, means that caller didn't read
+		 * MSR_HWP_REQUEST, so need to read and get EPP.
+		 */
+		if (!hwp_req_data) {
+			epp = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST,
+					    &hwp_req_data);
+			if (epp)
+				return epp;
+		}
+		epp = (hwp_req_data >> 24) & 0xff;
+	} else {
+		/* When there is no EPP present, HWP uses EPB settings */
+		epp = intel_pstate_get_epb(cpu_data);
+	}
+
+	return epp;
+}
+
+static int intel_pstate_set_epb(int cpu, s16 pref)
+{
+	u64 epb;
+	int ret;
+
+	if (!static_cpu_has(X86_FEATURE_EPB))
+		return -ENXIO;
+
+	ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb);
+	if (ret)
+		return ret;
+
+	epb = (epb & ~0x0f) | pref;
+	wrmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, epb);
+
+	return 0;
+}
+
+/*
+ * EPP/EPB display strings corresponding to EPP index in the
+ * energy_perf_strings[]
+ *	index		String
+ *-------------------------------------
+ *	0		default
+ *	1		performance
+ *	2		balance_performance
+ *	3		balance_power
+ *	4		power
+ */
+static const char * const energy_perf_strings[] = {
+	"default",
+	"performance",
+	"balance_performance",
+	"balance_power",
+	"power",
+	NULL
+};
+static const unsigned int epp_values[] = {
+	HWP_EPP_PERFORMANCE,
+	HWP_EPP_BALANCE_PERFORMANCE,
+	HWP_EPP_BALANCE_POWERSAVE,
+	HWP_EPP_POWERSAVE
+};
+
+static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data)
+{
+	s16 epp;
+	int index = -EINVAL;
+
+	epp = intel_pstate_get_epp(cpu_data, 0);
+	if (epp < 0)
+		return epp;
+
+	if (static_cpu_has(X86_FEATURE_HWP_EPP)) {
+		if (epp == HWP_EPP_PERFORMANCE)
+			return 1;
+		if (epp <= HWP_EPP_BALANCE_PERFORMANCE)
+			return 2;
+		if (epp <= HWP_EPP_BALANCE_POWERSAVE)
+			return 3;
+		else
+			return 4;
+	} else if (static_cpu_has(X86_FEATURE_EPB)) {
+		/*
+		 * Range:
+		 *	0x00-0x03	:	Performance
+		 *	0x04-0x07	:	Balance performance
+		 *	0x08-0x0B	:	Balance power
+		 *	0x0C-0x0F	:	Power
+		 * The EPB is a 4 bit value, but our ranges restrict the
+		 * value which can be set. Here only using top two bits
+		 * effectively.
+		 */
+		index = (epp >> 2) + 1;
+	}
+
+	return index;
+}
+
+static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data,
+					      int pref_index)
+{
+	int epp = -EINVAL;
+	int ret;
+
+	if (!pref_index)
+		epp = cpu_data->epp_default;
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	if (static_cpu_has(X86_FEATURE_HWP_EPP)) {
+		u64 value;
+
+		ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, &value);
+		if (ret)
+			goto return_pref;
+
+		value &= ~GENMASK_ULL(31, 24);
+
+		if (epp == -EINVAL)
+			epp = epp_values[pref_index - 1];
+
+		value |= (u64)epp << 24;
+		ret = wrmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, value);
+	} else {
+		if (epp == -EINVAL)
+			epp = (pref_index - 1) << 2;
+		ret = intel_pstate_set_epb(cpu_data->cpu, epp);
+	}
+return_pref:
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	return ret;
+}
+
+static ssize_t show_energy_performance_available_preferences(
+				struct cpufreq_policy *policy, char *buf)
+{
+	int i = 0;
+	int ret = 0;
+
+	while (energy_perf_strings[i] != NULL)
+		ret += sprintf(&buf[ret], "%s ", energy_perf_strings[i++]);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+cpufreq_freq_attr_ro(energy_performance_available_preferences);
+
+static ssize_t store_energy_performance_preference(
+		struct cpufreq_policy *policy, const char *buf, size_t count)
+{
+	struct cpudata *cpu_data = all_cpu_data[policy->cpu];
+	char str_preference[21];
+	int ret, i = 0;
+
+	ret = sscanf(buf, "%20s", str_preference);
+	if (ret != 1)
+		return -EINVAL;
+
+	while (energy_perf_strings[i] != NULL) {
+		if (!strcmp(str_preference, energy_perf_strings[i])) {
+			intel_pstate_set_energy_pref_index(cpu_data, i);
+			return count;
+		}
+		++i;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t show_energy_performance_preference(
+				struct cpufreq_policy *policy, char *buf)
+{
+	struct cpudata *cpu_data = all_cpu_data[policy->cpu];
+	int preference;
+
+	preference = intel_pstate_get_energy_pref_index(cpu_data);
+	if (preference < 0)
+		return preference;
+
+	return  sprintf(buf, "%s\n", energy_perf_strings[preference]);
+}
+
+cpufreq_freq_attr_rw(energy_performance_preference);
+
+static struct freq_attr *hwp_cpufreq_attrs[] = {
+	&energy_performance_preference,
+	&energy_performance_available_preferences,
+	NULL,
+};
+
+static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max,
+				     int *current_max)
+{
+	u64 cap;
+
+	rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap);
+	if (global.no_turbo)
+		*current_max = HWP_GUARANTEED_PERF(cap);
+	else
+		*current_max = HWP_HIGHEST_PERF(cap);
+
+	*phy_max = HWP_HIGHEST_PERF(cap);
+}
+
+static void intel_pstate_hwp_set(unsigned int cpu)
+{
+	struct cpudata *cpu_data = all_cpu_data[cpu];
+	int max, min;
+	u64 value;
+	s16 epp;
+
+	max = cpu_data->max_perf_ratio;
+	min = cpu_data->min_perf_ratio;
+
+	if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE)
+		min = max;
+
+	rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value);
+
+	value &= ~HWP_MIN_PERF(~0L);
+	value |= HWP_MIN_PERF(min);
+
+	value &= ~HWP_MAX_PERF(~0L);
+	value |= HWP_MAX_PERF(max);
+
+	if (cpu_data->epp_policy == cpu_data->policy)
+		goto skip_epp;
+
+	cpu_data->epp_policy = cpu_data->policy;
+
+	if (cpu_data->epp_saved >= 0) {
+		epp = cpu_data->epp_saved;
+		cpu_data->epp_saved = -EINVAL;
+		goto update_epp;
+	}
+
+	if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) {
+		epp = intel_pstate_get_epp(cpu_data, value);
+		cpu_data->epp_powersave = epp;
+		/* If EPP read was failed, then don't try to write */
+		if (epp < 0)
+			goto skip_epp;
+
+		epp = 0;
+	} else {
+		/* skip setting EPP, when saved value is invalid */
+		if (cpu_data->epp_powersave < 0)
+			goto skip_epp;
+
+		/*
+		 * No need to restore EPP when it is not zero. This
+		 * means:
+		 *  - Policy is not changed
+		 *  - user has manually changed
+		 *  - Error reading EPB
+		 */
+		epp = intel_pstate_get_epp(cpu_data, value);
+		if (epp)
+			goto skip_epp;
+
+		epp = cpu_data->epp_powersave;
+	}
+update_epp:
+	if (static_cpu_has(X86_FEATURE_HWP_EPP)) {
+		value &= ~GENMASK_ULL(31, 24);
+		value |= (u64)epp << 24;
+	} else {
+		intel_pstate_set_epb(cpu, epp);
+	}
+skip_epp:
+	wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value);
+}
+
+static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu_data = all_cpu_data[policy->cpu];
+
+	if (!hwp_active)
+		return 0;
+
+	cpu_data->epp_saved = intel_pstate_get_epp(cpu_data, 0);
+
+	return 0;
+}
+
+static void intel_pstate_hwp_enable(struct cpudata *cpudata);
+
+static int intel_pstate_resume(struct cpufreq_policy *policy)
+{
+	if (!hwp_active)
+		return 0;
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	if (policy->cpu == 0)
+		intel_pstate_hwp_enable(all_cpu_data[policy->cpu]);
+
+	all_cpu_data[policy->cpu]->epp_policy = 0;
+	intel_pstate_hwp_set(policy->cpu);
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	return 0;
+}
+
+static void intel_pstate_update_policies(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		cpufreq_update_policy(cpu);
+}
+
+/************************** sysfs begin ************************/
+#define show_one(file_name, object)					\
+	static ssize_t show_##file_name					\
+	(struct kobject *kobj, struct kobj_attribute *attr, char *buf)	\
+	{								\
+		return sprintf(buf, "%u\n", global.object);		\
+	}
+
+static ssize_t intel_pstate_show_status(char *buf);
+static int intel_pstate_update_status(const char *buf, size_t size);
+
+static ssize_t show_status(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	ssize_t ret;
+
+	mutex_lock(&intel_pstate_driver_lock);
+	ret = intel_pstate_show_status(buf);
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return ret;
+}
+
+static ssize_t store_status(struct kobject *a, struct kobj_attribute *b,
+			    const char *buf, size_t count)
+{
+	char *p = memchr(buf, '\n', count);
+	int ret;
+
+	mutex_lock(&intel_pstate_driver_lock);
+	ret = intel_pstate_update_status(buf, p ? p - buf : count);
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return ret < 0 ? ret : count;
+}
+
+static ssize_t show_turbo_pct(struct kobject *kobj,
+				struct kobj_attribute *attr, char *buf)
+{
+	struct cpudata *cpu;
+	int total, no_turbo, turbo_pct;
+	uint32_t turbo_fp;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	cpu = all_cpu_data[0];
+
+	total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
+	no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1;
+	turbo_fp = div_fp(no_turbo, total);
+	turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100)));
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return sprintf(buf, "%u\n", turbo_pct);
+}
+
+static ssize_t show_num_pstates(struct kobject *kobj,
+				struct kobj_attribute *attr, char *buf)
+{
+	struct cpudata *cpu;
+	int total;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	cpu = all_cpu_data[0];
+	total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return sprintf(buf, "%u\n", total);
+}
+
+static ssize_t show_no_turbo(struct kobject *kobj,
+			     struct kobj_attribute *attr, char *buf)
+{
+	ssize_t ret;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	update_turbo_state();
+	if (global.turbo_disabled)
+		ret = sprintf(buf, "%u\n", global.turbo_disabled);
+	else
+		ret = sprintf(buf, "%u\n", global.no_turbo);
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return ret;
+}
+
+static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
+			      const char *buf, size_t count)
+{
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	update_turbo_state();
+	if (global.turbo_disabled) {
+		pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n");
+		mutex_unlock(&intel_pstate_limits_lock);
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EPERM;
+	}
+
+	global.no_turbo = clamp_t(int, input, 0, 1);
+
+	if (global.no_turbo) {
+		struct cpudata *cpu = all_cpu_data[0];
+		int pct = cpu->pstate.max_pstate * 100 / cpu->pstate.turbo_pstate;
+
+		/* Squash the global minimum into the permitted range. */
+		if (global.min_perf_pct > pct)
+			global.min_perf_pct = pct;
+	}
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	intel_pstate_update_policies();
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return count;
+}
+
+static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
+				  const char *buf, size_t count)
+{
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	global.max_perf_pct = clamp_t(int, input, global.min_perf_pct, 100);
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	intel_pstate_update_policies();
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return count;
+}
+
+static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b,
+				  const char *buf, size_t count)
+{
+	unsigned int input;
+	int ret;
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
+
+	mutex_lock(&intel_pstate_driver_lock);
+
+	if (!intel_pstate_driver) {
+		mutex_unlock(&intel_pstate_driver_lock);
+		return -EAGAIN;
+	}
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	global.min_perf_pct = clamp_t(int, input,
+				      min_perf_pct_min(), global.max_perf_pct);
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	intel_pstate_update_policies();
+
+	mutex_unlock(&intel_pstate_driver_lock);
+
+	return count;
+}
+
+show_one(max_perf_pct, max_perf_pct);
+show_one(min_perf_pct, min_perf_pct);
+
+define_one_global_rw(status);
+define_one_global_rw(no_turbo);
+define_one_global_rw(max_perf_pct);
+define_one_global_rw(min_perf_pct);
+define_one_global_ro(turbo_pct);
+define_one_global_ro(num_pstates);
+
+static struct attribute *intel_pstate_attributes[] = {
+	&status.attr,
+	&no_turbo.attr,
+	&turbo_pct.attr,
+	&num_pstates.attr,
+	NULL
+};
+
+static const struct attribute_group intel_pstate_attr_group = {
+	.attrs = intel_pstate_attributes,
+};
+
+static void __init intel_pstate_sysfs_expose_params(void)
+{
+	struct kobject *intel_pstate_kobject;
+	int rc;
+
+	intel_pstate_kobject = kobject_create_and_add("intel_pstate",
+						&cpu_subsys.dev_root->kobj);
+	if (WARN_ON(!intel_pstate_kobject))
+		return;
+
+	rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group);
+	if (WARN_ON(rc))
+		return;
+
+	/*
+	 * If per cpu limits are enforced there are no global limits, so
+	 * return without creating max/min_perf_pct attributes
+	 */
+	if (per_cpu_limits)
+		return;
+
+	rc = sysfs_create_file(intel_pstate_kobject, &max_perf_pct.attr);
+	WARN_ON(rc);
+
+	rc = sysfs_create_file(intel_pstate_kobject, &min_perf_pct.attr);
+	WARN_ON(rc);
+
+}
+/************************** sysfs end ************************/
+
+static void intel_pstate_hwp_enable(struct cpudata *cpudata)
+{
+	/* First disable HWP notification interrupt as we don't process them */
+	if (static_cpu_has(X86_FEATURE_HWP_NOTIFY))
+		wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00);
+
+	wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
+	cpudata->epp_policy = 0;
+	if (cpudata->epp_default == -EINVAL)
+		cpudata->epp_default = intel_pstate_get_epp(cpudata, 0);
+}
+
+#define MSR_IA32_POWER_CTL_BIT_EE	19
+
+/* Disable energy efficiency optimization */
+static void intel_pstate_disable_ee(int cpu)
+{
+	u64 power_ctl;
+	int ret;
+
+	ret = rdmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, &power_ctl);
+	if (ret)
+		return;
+
+	if (!(power_ctl & BIT(MSR_IA32_POWER_CTL_BIT_EE))) {
+		pr_info("Disabling energy efficiency optimization\n");
+		power_ctl |= BIT(MSR_IA32_POWER_CTL_BIT_EE);
+		wrmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, power_ctl);
+	}
+}
+
+static int atom_get_min_pstate(void)
+{
+	u64 value;
+
+	rdmsrl(MSR_ATOM_CORE_RATIOS, value);
+	return (value >> 8) & 0x7F;
+}
+
+static int atom_get_max_pstate(void)
+{
+	u64 value;
+
+	rdmsrl(MSR_ATOM_CORE_RATIOS, value);
+	return (value >> 16) & 0x7F;
+}
+
+static int atom_get_turbo_pstate(void)
+{
+	u64 value;
+
+	rdmsrl(MSR_ATOM_CORE_TURBO_RATIOS, value);
+	return value & 0x7F;
+}
+
+static u64 atom_get_val(struct cpudata *cpudata, int pstate)
+{
+	u64 val;
+	int32_t vid_fp;
+	u32 vid;
+
+	val = (u64)pstate << 8;
+	if (global.no_turbo && !global.turbo_disabled)
+		val |= (u64)1 << 32;
+
+	vid_fp = cpudata->vid.min + mul_fp(
+		int_tofp(pstate - cpudata->pstate.min_pstate),
+		cpudata->vid.ratio);
+
+	vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max);
+	vid = ceiling_fp(vid_fp);
+
+	if (pstate > cpudata->pstate.max_pstate)
+		vid = cpudata->vid.turbo;
+
+	return val | vid;
+}
+
+static int silvermont_get_scaling(void)
+{
+	u64 value;
+	int i;
+	/* Defined in Table 35-6 from SDM (Sept 2015) */
+	static int silvermont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000};
+
+	rdmsrl(MSR_FSB_FREQ, value);
+	i = value & 0x7;
+	WARN_ON(i > 4);
+
+	return silvermont_freq_table[i];
+}
+
+static int airmont_get_scaling(void)
+{
+	u64 value;
+	int i;
+	/* Defined in Table 35-10 from SDM (Sept 2015) */
+	static int airmont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000,
+		93300, 90000, 88900, 87500};
+
+	rdmsrl(MSR_FSB_FREQ, value);
+	i = value & 0xF;
+	WARN_ON(i > 8);
+
+	return airmont_freq_table[i];
+}
+
+static void atom_get_vid(struct cpudata *cpudata)
+{
+	u64 value;
+
+	rdmsrl(MSR_ATOM_CORE_VIDS, value);
+	cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
+	cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
+	cpudata->vid.ratio = div_fp(
+		cpudata->vid.max - cpudata->vid.min,
+		int_tofp(cpudata->pstate.max_pstate -
+			cpudata->pstate.min_pstate));
+
+	rdmsrl(MSR_ATOM_CORE_TURBO_VIDS, value);
+	cpudata->vid.turbo = value & 0x7f;
+}
+
+static int core_get_min_pstate(void)
+{
+	u64 value;
+
+	rdmsrl(MSR_PLATFORM_INFO, value);
+	return (value >> 40) & 0xFF;
+}
+
+static int core_get_max_pstate_physical(void)
+{
+	u64 value;
+
+	rdmsrl(MSR_PLATFORM_INFO, value);
+	return (value >> 8) & 0xFF;
+}
+
+static int core_get_tdp_ratio(u64 plat_info)
+{
+	/* Check how many TDP levels present */
+	if (plat_info & 0x600000000) {
+		u64 tdp_ctrl;
+		u64 tdp_ratio;
+		int tdp_msr;
+		int err;
+
+		/* Get the TDP level (0, 1, 2) to get ratios */
+		err = rdmsrl_safe(MSR_CONFIG_TDP_CONTROL, &tdp_ctrl);
+		if (err)
+			return err;
+
+		/* TDP MSR are continuous starting at 0x648 */
+		tdp_msr = MSR_CONFIG_TDP_NOMINAL + (tdp_ctrl & 0x03);
+		err = rdmsrl_safe(tdp_msr, &tdp_ratio);
+		if (err)
+			return err;
+
+		/* For level 1 and 2, bits[23:16] contain the ratio */
+		if (tdp_ctrl & 0x03)
+			tdp_ratio >>= 16;
+
+		tdp_ratio &= 0xff; /* ratios are only 8 bits long */
+		pr_debug("tdp_ratio %x\n", (int)tdp_ratio);
+
+		return (int)tdp_ratio;
+	}
+
+	return -ENXIO;
+}
+
+static int core_get_max_pstate(void)
+{
+	u64 tar;
+	u64 plat_info;
+	int max_pstate;
+	int tdp_ratio;
+	int err;
+
+	rdmsrl(MSR_PLATFORM_INFO, plat_info);
+	max_pstate = (plat_info >> 8) & 0xFF;
+
+	tdp_ratio = core_get_tdp_ratio(plat_info);
+	if (tdp_ratio <= 0)
+		return max_pstate;
+
+	if (hwp_active) {
+		/* Turbo activation ratio is not used on HWP platforms */
+		return tdp_ratio;
+	}
+
+	err = rdmsrl_safe(MSR_TURBO_ACTIVATION_RATIO, &tar);
+	if (!err) {
+		int tar_levels;
+
+		/* Do some sanity checking for safety */
+		tar_levels = tar & 0xff;
+		if (tdp_ratio - 1 == tar_levels) {
+			max_pstate = tar_levels;
+			pr_debug("max_pstate=TAC %x\n", max_pstate);
+		}
+	}
+
+	return max_pstate;
+}
+
+static int core_get_turbo_pstate(void)
+{
+	u64 value;
+	int nont, ret;
+
+	rdmsrl(MSR_TURBO_RATIO_LIMIT, value);
+	nont = core_get_max_pstate();
+	ret = (value) & 255;
+	if (ret <= nont)
+		ret = nont;
+	return ret;
+}
+
+static inline int core_get_scaling(void)
+{
+	return 100000;
+}
+
+static u64 core_get_val(struct cpudata *cpudata, int pstate)
+{
+	u64 val;
+
+	val = (u64)pstate << 8;
+	if (global.no_turbo && !global.turbo_disabled)
+		val |= (u64)1 << 32;
+
+	return val;
+}
+
+static int knl_get_aperf_mperf_shift(void)
+{
+	return 10;
+}
+
+static int knl_get_turbo_pstate(void)
+{
+	u64 value;
+	int nont, ret;
+
+	rdmsrl(MSR_TURBO_RATIO_LIMIT, value);
+	nont = core_get_max_pstate();
+	ret = (((value) >> 8) & 0xFF);
+	if (ret <= nont)
+		ret = nont;
+	return ret;
+}
+
+static int intel_pstate_get_base_pstate(struct cpudata *cpu)
+{
+	return global.no_turbo || global.turbo_disabled ?
+			cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
+}
+
+static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
+{
+	trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu);
+	cpu->pstate.current_pstate = pstate;
+	/*
+	 * Generally, there is no guarantee that this code will always run on
+	 * the CPU being updated, so force the register update to run on the
+	 * right CPU.
+	 */
+	wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL,
+		      pstate_funcs.get_val(cpu, pstate));
+}
+
+static void intel_pstate_set_min_pstate(struct cpudata *cpu)
+{
+	intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate);
+}
+
+static void intel_pstate_max_within_limits(struct cpudata *cpu)
+{
+	int pstate;
+
+	update_turbo_state();
+	pstate = intel_pstate_get_base_pstate(cpu);
+	pstate = max(cpu->pstate.min_pstate, cpu->max_perf_ratio);
+	intel_pstate_set_pstate(cpu, pstate);
+}
+
+static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
+{
+	cpu->pstate.min_pstate = pstate_funcs.get_min();
+	cpu->pstate.max_pstate = pstate_funcs.get_max();
+	cpu->pstate.max_pstate_physical = pstate_funcs.get_max_physical();
+	cpu->pstate.turbo_pstate = pstate_funcs.get_turbo();
+	cpu->pstate.scaling = pstate_funcs.get_scaling();
+	cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling;
+
+	if (hwp_active && !hwp_mode_bdw) {
+		unsigned int phy_max, current_max;
+
+		intel_pstate_get_hwp_max(cpu->cpu, &phy_max, &current_max);
+		cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling;
+		cpu->pstate.turbo_pstate = phy_max;
+	} else {
+		cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+	}
+
+	if (pstate_funcs.get_aperf_mperf_shift)
+		cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift();
+
+	if (pstate_funcs.get_vid)
+		pstate_funcs.get_vid(cpu);
+
+	intel_pstate_set_min_pstate(cpu);
+}
+
+static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu)
+{
+	struct sample *sample = &cpu->sample;
+
+	sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf);
+}
+
+static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time)
+{
+	u64 aperf, mperf;
+	unsigned long flags;
+	u64 tsc;
+
+	local_irq_save(flags);
+	rdmsrl(MSR_IA32_APERF, aperf);
+	rdmsrl(MSR_IA32_MPERF, mperf);
+	tsc = rdtsc();
+	if (cpu->prev_mperf == mperf || cpu->prev_tsc == tsc) {
+		local_irq_restore(flags);
+		return false;
+	}
+	local_irq_restore(flags);
+
+	cpu->last_sample_time = cpu->sample.time;
+	cpu->sample.time = time;
+	cpu->sample.aperf = aperf;
+	cpu->sample.mperf = mperf;
+	cpu->sample.tsc =  tsc;
+	cpu->sample.aperf -= cpu->prev_aperf;
+	cpu->sample.mperf -= cpu->prev_mperf;
+	cpu->sample.tsc -= cpu->prev_tsc;
+
+	cpu->prev_aperf = aperf;
+	cpu->prev_mperf = mperf;
+	cpu->prev_tsc = tsc;
+	/*
+	 * First time this function is invoked in a given cycle, all of the
+	 * previous sample data fields are equal to zero or stale and they must
+	 * be populated with meaningful numbers for things to work, so assume
+	 * that sample.time will always be reset before setting the utilization
+	 * update hook and make the caller skip the sample then.
+	 */
+	if (cpu->last_sample_time) {
+		intel_pstate_calc_avg_perf(cpu);
+		return true;
+	}
+	return false;
+}
+
+static inline int32_t get_avg_frequency(struct cpudata *cpu)
+{
+	return mul_ext_fp(cpu->sample.core_avg_perf, cpu_khz);
+}
+
+static inline int32_t get_avg_pstate(struct cpudata *cpu)
+{
+	return mul_ext_fp(cpu->pstate.max_pstate_physical,
+			  cpu->sample.core_avg_perf);
+}
+
+static inline int32_t get_target_pstate(struct cpudata *cpu)
+{
+	struct sample *sample = &cpu->sample;
+	int32_t busy_frac, boost;
+	int target, avg_pstate;
+
+	busy_frac = div_fp(sample->mperf << cpu->aperf_mperf_shift,
+			   sample->tsc);
+
+	boost = cpu->iowait_boost;
+	cpu->iowait_boost >>= 1;
+
+	if (busy_frac < boost)
+		busy_frac = boost;
+
+	sample->busy_scaled = busy_frac * 100;
+
+	target = global.no_turbo || global.turbo_disabled ?
+			cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
+	target += target >> 2;
+	target = mul_fp(target, busy_frac);
+	if (target < cpu->pstate.min_pstate)
+		target = cpu->pstate.min_pstate;
+
+	/*
+	 * If the average P-state during the previous cycle was higher than the
+	 * current target, add 50% of the difference to the target to reduce
+	 * possible performance oscillations and offset possible performance
+	 * loss related to moving the workload from one CPU to another within
+	 * a package/module.
+	 */
+	avg_pstate = get_avg_pstate(cpu);
+	if (avg_pstate > target)
+		target += (avg_pstate - target) >> 1;
+
+	return target;
+}
+
+static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate)
+{
+	int max_pstate = intel_pstate_get_base_pstate(cpu);
+	int min_pstate;
+
+	min_pstate = max(cpu->pstate.min_pstate, cpu->min_perf_ratio);
+	max_pstate = max(min_pstate, cpu->max_perf_ratio);
+	return clamp_t(int, pstate, min_pstate, max_pstate);
+}
+
+static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate)
+{
+	if (pstate == cpu->pstate.current_pstate)
+		return;
+
+	cpu->pstate.current_pstate = pstate;
+	wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate));
+}
+
+static void intel_pstate_adjust_pstate(struct cpudata *cpu)
+{
+	int from = cpu->pstate.current_pstate;
+	struct sample *sample;
+	int target_pstate;
+
+	update_turbo_state();
+
+	target_pstate = get_target_pstate(cpu);
+	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	trace_cpu_frequency(target_pstate * cpu->pstate.scaling, cpu->cpu);
+	intel_pstate_update_pstate(cpu, target_pstate);
+
+	sample = &cpu->sample;
+	trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf),
+		fp_toint(sample->busy_scaled),
+		from,
+		cpu->pstate.current_pstate,
+		sample->mperf,
+		sample->aperf,
+		sample->tsc,
+		get_avg_frequency(cpu),
+		fp_toint(cpu->iowait_boost * 100));
+}
+
+static void intel_pstate_update_util(struct update_util_data *data, u64 time,
+				     unsigned int flags)
+{
+	struct cpudata *cpu = container_of(data, struct cpudata, update_util);
+	u64 delta_ns;
+
+	/* Don't allow remote callbacks */
+	if (smp_processor_id() != cpu->cpu)
+		return;
+
+	if (flags & SCHED_CPUFREQ_IOWAIT) {
+		cpu->iowait_boost = int_tofp(1);
+		cpu->last_update = time;
+		/*
+		 * The last time the busy was 100% so P-state was max anyway
+		 * so avoid overhead of computation.
+		 */
+		if (fp_toint(cpu->sample.busy_scaled) == 100)
+			return;
+
+		goto set_pstate;
+	} else if (cpu->iowait_boost) {
+		/* Clear iowait_boost if the CPU may have been idle. */
+		delta_ns = time - cpu->last_update;
+		if (delta_ns > TICK_NSEC)
+			cpu->iowait_boost = 0;
+	}
+	cpu->last_update = time;
+	delta_ns = time - cpu->sample.time;
+	if ((s64)delta_ns < INTEL_PSTATE_SAMPLING_INTERVAL)
+		return;
+
+set_pstate:
+	if (intel_pstate_sample(cpu, time))
+		intel_pstate_adjust_pstate(cpu);
+}
+
+static struct pstate_funcs core_funcs = {
+	.get_max = core_get_max_pstate,
+	.get_max_physical = core_get_max_pstate_physical,
+	.get_min = core_get_min_pstate,
+	.get_turbo = core_get_turbo_pstate,
+	.get_scaling = core_get_scaling,
+	.get_val = core_get_val,
+};
+
+static const struct pstate_funcs silvermont_funcs = {
+	.get_max = atom_get_max_pstate,
+	.get_max_physical = atom_get_max_pstate,
+	.get_min = atom_get_min_pstate,
+	.get_turbo = atom_get_turbo_pstate,
+	.get_val = atom_get_val,
+	.get_scaling = silvermont_get_scaling,
+	.get_vid = atom_get_vid,
+};
+
+static const struct pstate_funcs airmont_funcs = {
+	.get_max = atom_get_max_pstate,
+	.get_max_physical = atom_get_max_pstate,
+	.get_min = atom_get_min_pstate,
+	.get_turbo = atom_get_turbo_pstate,
+	.get_val = atom_get_val,
+	.get_scaling = airmont_get_scaling,
+	.get_vid = atom_get_vid,
+};
+
+static const struct pstate_funcs knl_funcs = {
+	.get_max = core_get_max_pstate,
+	.get_max_physical = core_get_max_pstate_physical,
+	.get_min = core_get_min_pstate,
+	.get_turbo = knl_get_turbo_pstate,
+	.get_aperf_mperf_shift = knl_get_aperf_mperf_shift,
+	.get_scaling = core_get_scaling,
+	.get_val = core_get_val,
+};
+
+static const struct pstate_funcs bxt_funcs = {
+	.get_max = core_get_max_pstate,
+	.get_max_physical = core_get_max_pstate_physical,
+	.get_min = core_get_min_pstate,
+	.get_turbo = core_get_turbo_pstate,
+	.get_scaling = core_get_scaling,
+	.get_val = core_get_val,
+};
+
+#define ICPU(model, policy) \
+	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\
+			(unsigned long)&policy }
+
+static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
+	ICPU(INTEL_FAM6_SANDYBRIDGE, 		core_funcs),
+	ICPU(INTEL_FAM6_SANDYBRIDGE_X,		core_funcs),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT,	silvermont_funcs),
+	ICPU(INTEL_FAM6_IVYBRIDGE,		core_funcs),
+	ICPU(INTEL_FAM6_HASWELL_CORE,		core_funcs),
+	ICPU(INTEL_FAM6_BROADWELL_CORE,		core_funcs),
+	ICPU(INTEL_FAM6_IVYBRIDGE_X,		core_funcs),
+	ICPU(INTEL_FAM6_HASWELL_X,		core_funcs),
+	ICPU(INTEL_FAM6_HASWELL_ULT,		core_funcs),
+	ICPU(INTEL_FAM6_HASWELL_GT3E,		core_funcs),
+	ICPU(INTEL_FAM6_BROADWELL_GT3E,		core_funcs),
+	ICPU(INTEL_FAM6_ATOM_AIRMONT,		airmont_funcs),
+	ICPU(INTEL_FAM6_SKYLAKE_MOBILE,		core_funcs),
+	ICPU(INTEL_FAM6_BROADWELL_X,		core_funcs),
+	ICPU(INTEL_FAM6_SKYLAKE_DESKTOP,	core_funcs),
+	ICPU(INTEL_FAM6_BROADWELL_XEON_D,	core_funcs),
+	ICPU(INTEL_FAM6_XEON_PHI_KNL,		knl_funcs),
+	ICPU(INTEL_FAM6_XEON_PHI_KNM,		knl_funcs),
+	ICPU(INTEL_FAM6_ATOM_GOLDMONT,		bxt_funcs),
+	ICPU(INTEL_FAM6_ATOM_GOLDMONT_PLUS,     bxt_funcs),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);
+
+static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = {
+	ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs),
+	ICPU(INTEL_FAM6_BROADWELL_X, core_funcs),
+	ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs),
+	{}
+};
+
+static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = {
+	ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_funcs),
+	{}
+};
+
+static int intel_pstate_init_cpu(unsigned int cpunum)
+{
+	struct cpudata *cpu;
+
+	cpu = all_cpu_data[cpunum];
+
+	if (!cpu) {
+		cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
+		if (!cpu)
+			return -ENOMEM;
+
+		all_cpu_data[cpunum] = cpu;
+
+		cpu->epp_default = -EINVAL;
+		cpu->epp_powersave = -EINVAL;
+		cpu->epp_saved = -EINVAL;
+	}
+
+	cpu = all_cpu_data[cpunum];
+
+	cpu->cpu = cpunum;
+
+	if (hwp_active) {
+		const struct x86_cpu_id *id;
+
+		id = x86_match_cpu(intel_pstate_cpu_ee_disable_ids);
+		if (id)
+			intel_pstate_disable_ee(cpunum);
+
+		intel_pstate_hwp_enable(cpu);
+	}
+
+	intel_pstate_get_cpu_pstates(cpu);
+
+	pr_debug("controlling: cpu %d\n", cpunum);
+
+	return 0;
+}
+
+static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
+{
+	struct cpudata *cpu = all_cpu_data[cpu_num];
+
+	if (hwp_active)
+		return;
+
+	if (cpu->update_util_set)
+		return;
+
+	/* Prevent intel_pstate_update_util() from using stale data. */
+	cpu->sample.time = 0;
+	cpufreq_add_update_util_hook(cpu_num, &cpu->update_util,
+				     intel_pstate_update_util);
+	cpu->update_util_set = true;
+}
+
+static void intel_pstate_clear_update_util_hook(unsigned int cpu)
+{
+	struct cpudata *cpu_data = all_cpu_data[cpu];
+
+	if (!cpu_data->update_util_set)
+		return;
+
+	cpufreq_remove_update_util_hook(cpu);
+	cpu_data->update_util_set = false;
+	synchronize_sched();
+}
+
+static int intel_pstate_get_max_freq(struct cpudata *cpu)
+{
+	return global.turbo_disabled || global.no_turbo ?
+			cpu->pstate.max_freq : cpu->pstate.turbo_freq;
+}
+
+static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy,
+					    struct cpudata *cpu)
+{
+	int max_freq = intel_pstate_get_max_freq(cpu);
+	int32_t max_policy_perf, min_policy_perf;
+	int max_state, turbo_max;
+
+	/*
+	 * HWP needs some special consideration, because on BDX the
+	 * HWP_REQUEST uses abstract value to represent performance
+	 * rather than pure ratios.
+	 */
+	if (hwp_active) {
+		intel_pstate_get_hwp_max(cpu->cpu, &turbo_max, &max_state);
+	} else {
+		max_state = intel_pstate_get_base_pstate(cpu);
+		turbo_max = cpu->pstate.turbo_pstate;
+	}
+
+	max_policy_perf = max_state * policy->max / max_freq;
+	if (policy->max == policy->min) {
+		min_policy_perf = max_policy_perf;
+	} else {
+		min_policy_perf = max_state * policy->min / max_freq;
+		min_policy_perf = clamp_t(int32_t, min_policy_perf,
+					  0, max_policy_perf);
+	}
+
+	pr_debug("cpu:%d max_state %d min_policy_perf:%d max_policy_perf:%d\n",
+		 policy->cpu, max_state,
+		 min_policy_perf, max_policy_perf);
+
+	/* Normalize user input to [min_perf, max_perf] */
+	if (per_cpu_limits) {
+		cpu->min_perf_ratio = min_policy_perf;
+		cpu->max_perf_ratio = max_policy_perf;
+	} else {
+		int32_t global_min, global_max;
+
+		/* Global limits are in percent of the maximum turbo P-state. */
+		global_max = DIV_ROUND_UP(turbo_max * global.max_perf_pct, 100);
+		global_min = DIV_ROUND_UP(turbo_max * global.min_perf_pct, 100);
+		global_min = clamp_t(int32_t, global_min, 0, global_max);
+
+		pr_debug("cpu:%d global_min:%d global_max:%d\n", policy->cpu,
+			 global_min, global_max);
+
+		cpu->min_perf_ratio = max(min_policy_perf, global_min);
+		cpu->min_perf_ratio = min(cpu->min_perf_ratio, max_policy_perf);
+		cpu->max_perf_ratio = min(max_policy_perf, global_max);
+		cpu->max_perf_ratio = max(min_policy_perf, cpu->max_perf_ratio);
+
+		/* Make sure min_perf <= max_perf */
+		cpu->min_perf_ratio = min(cpu->min_perf_ratio,
+					  cpu->max_perf_ratio);
+
+	}
+	pr_debug("cpu:%d max_perf_ratio:%d min_perf_ratio:%d\n", policy->cpu,
+		 cpu->max_perf_ratio,
+		 cpu->min_perf_ratio);
+}
+
+static int intel_pstate_set_policy(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+
+	if (!policy->cpuinfo.max_freq)
+		return -ENODEV;
+
+	pr_debug("set_policy cpuinfo.max %u policy->max %u\n",
+		 policy->cpuinfo.max_freq, policy->max);
+
+	cpu = all_cpu_data[policy->cpu];
+	cpu->policy = policy->policy;
+
+	mutex_lock(&intel_pstate_limits_lock);
+
+	intel_pstate_update_perf_limits(policy, cpu);
+
+	if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) {
+		/*
+		 * NOHZ_FULL CPUs need this as the governor callback may not
+		 * be invoked on them.
+		 */
+		intel_pstate_clear_update_util_hook(policy->cpu);
+		intel_pstate_max_within_limits(cpu);
+	} else {
+		intel_pstate_set_update_util_hook(policy->cpu);
+	}
+
+	if (hwp_active)
+		intel_pstate_hwp_set(policy->cpu);
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	return 0;
+}
+
+static void intel_pstate_adjust_policy_max(struct cpufreq_policy *policy,
+					 struct cpudata *cpu)
+{
+	if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate &&
+	    policy->max < policy->cpuinfo.max_freq &&
+	    policy->max > cpu->pstate.max_freq) {
+		pr_debug("policy->max > max non turbo frequency\n");
+		policy->max = policy->cpuinfo.max_freq;
+	}
+}
+
+static int intel_pstate_verify_policy(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu = all_cpu_data[policy->cpu];
+
+	update_turbo_state();
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     intel_pstate_get_max_freq(cpu));
+
+	if (policy->policy != CPUFREQ_POLICY_POWERSAVE &&
+	    policy->policy != CPUFREQ_POLICY_PERFORMANCE)
+		return -EINVAL;
+
+	intel_pstate_adjust_policy_max(policy, cpu);
+
+	return 0;
+}
+
+static void intel_cpufreq_stop_cpu(struct cpufreq_policy *policy)
+{
+	intel_pstate_set_min_pstate(all_cpu_data[policy->cpu]);
+}
+
+static void intel_pstate_stop_cpu(struct cpufreq_policy *policy)
+{
+	pr_debug("CPU %d exiting\n", policy->cpu);
+
+	intel_pstate_clear_update_util_hook(policy->cpu);
+	if (hwp_active)
+		intel_pstate_hwp_save_state(policy);
+	else
+		intel_cpufreq_stop_cpu(policy);
+}
+
+static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+	intel_pstate_exit_perf_limits(policy);
+
+	policy->fast_switch_possible = false;
+
+	return 0;
+}
+
+static int __intel_pstate_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+	int rc;
+
+	rc = intel_pstate_init_cpu(policy->cpu);
+	if (rc)
+		return rc;
+
+	cpu = all_cpu_data[policy->cpu];
+
+	cpu->max_perf_ratio = 0xFF;
+	cpu->min_perf_ratio = 0;
+
+	policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling;
+	policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
+	update_turbo_state();
+	policy->cpuinfo.max_freq = global.turbo_disabled ?
+			cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
+	policy->cpuinfo.max_freq *= cpu->pstate.scaling;
+
+	intel_pstate_init_acpi_perf_limits(policy);
+
+	policy->fast_switch_possible = true;
+
+	return 0;
+}
+
+static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
+{
+	int ret = __intel_pstate_cpu_init(policy);
+
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE))
+		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	else
+		policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+	return 0;
+}
+
+static struct cpufreq_driver intel_pstate = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= intel_pstate_verify_policy,
+	.setpolicy	= intel_pstate_set_policy,
+	.suspend	= intel_pstate_hwp_save_state,
+	.resume		= intel_pstate_resume,
+	.init		= intel_pstate_cpu_init,
+	.exit		= intel_pstate_cpu_exit,
+	.stop_cpu	= intel_pstate_stop_cpu,
+	.name		= "intel_pstate",
+};
+
+static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu = all_cpu_data[policy->cpu];
+
+	update_turbo_state();
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     intel_pstate_get_max_freq(cpu));
+
+	intel_pstate_adjust_policy_max(policy, cpu);
+
+	intel_pstate_update_perf_limits(policy, cpu);
+
+	return 0;
+}
+
+static int intel_cpufreq_target(struct cpufreq_policy *policy,
+				unsigned int target_freq,
+				unsigned int relation)
+{
+	struct cpudata *cpu = all_cpu_data[policy->cpu];
+	struct cpufreq_freqs freqs;
+	int target_pstate;
+
+	update_turbo_state();
+
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	switch (relation) {
+	case CPUFREQ_RELATION_L:
+		target_pstate = DIV_ROUND_UP(freqs.new, cpu->pstate.scaling);
+		break;
+	case CPUFREQ_RELATION_H:
+		target_pstate = freqs.new / cpu->pstate.scaling;
+		break;
+	default:
+		target_pstate = DIV_ROUND_CLOSEST(freqs.new, cpu->pstate.scaling);
+		break;
+	}
+	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	if (target_pstate != cpu->pstate.current_pstate) {
+		cpu->pstate.current_pstate = target_pstate;
+		wrmsrl_on_cpu(policy->cpu, MSR_IA32_PERF_CTL,
+			      pstate_funcs.get_val(cpu, target_pstate));
+	}
+	freqs.new = target_pstate * cpu->pstate.scaling;
+	cpufreq_freq_transition_end(policy, &freqs, false);
+
+	return 0;
+}
+
+static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy,
+					      unsigned int target_freq)
+{
+	struct cpudata *cpu = all_cpu_data[policy->cpu];
+	int target_pstate;
+
+	update_turbo_state();
+
+	target_pstate = DIV_ROUND_UP(target_freq, cpu->pstate.scaling);
+	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	intel_pstate_update_pstate(cpu, target_pstate);
+	return target_pstate * cpu->pstate.scaling;
+}
+
+static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	int ret = __intel_pstate_cpu_init(policy);
+
+	if (ret)
+		return ret;
+
+	policy->cpuinfo.transition_latency = INTEL_CPUFREQ_TRANSITION_LATENCY;
+	policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY;
+	/* This reflects the intel_pstate_get_cpu_pstates() setting. */
+	policy->cur = policy->cpuinfo.min_freq;
+
+	return 0;
+}
+
+static struct cpufreq_driver intel_cpufreq = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= intel_cpufreq_verify_policy,
+	.target		= intel_cpufreq_target,
+	.fast_switch	= intel_cpufreq_fast_switch,
+	.init		= intel_cpufreq_cpu_init,
+	.exit		= intel_pstate_cpu_exit,
+	.stop_cpu	= intel_cpufreq_stop_cpu,
+	.name		= "intel_cpufreq",
+};
+
+static struct cpufreq_driver *default_driver = &intel_pstate;
+
+static void intel_pstate_driver_cleanup(void)
+{
+	unsigned int cpu;
+
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		if (all_cpu_data[cpu]) {
+			if (intel_pstate_driver == &intel_pstate)
+				intel_pstate_clear_update_util_hook(cpu);
+
+			kfree(all_cpu_data[cpu]);
+			all_cpu_data[cpu] = NULL;
+		}
+	}
+	put_online_cpus();
+	intel_pstate_driver = NULL;
+}
+
+static int intel_pstate_register_driver(struct cpufreq_driver *driver)
+{
+	int ret;
+
+	memset(&global, 0, sizeof(global));
+	global.max_perf_pct = 100;
+
+	intel_pstate_driver = driver;
+	ret = cpufreq_register_driver(intel_pstate_driver);
+	if (ret) {
+		intel_pstate_driver_cleanup();
+		return ret;
+	}
+
+	global.min_perf_pct = min_perf_pct_min();
+
+	return 0;
+}
+
+static int intel_pstate_unregister_driver(void)
+{
+	if (hwp_active)
+		return -EBUSY;
+
+	cpufreq_unregister_driver(intel_pstate_driver);
+	intel_pstate_driver_cleanup();
+
+	return 0;
+}
+
+static ssize_t intel_pstate_show_status(char *buf)
+{
+	if (!intel_pstate_driver)
+		return sprintf(buf, "off\n");
+
+	return sprintf(buf, "%s\n", intel_pstate_driver == &intel_pstate ?
+					"active" : "passive");
+}
+
+static int intel_pstate_update_status(const char *buf, size_t size)
+{
+	int ret;
+
+	if (size == 3 && !strncmp(buf, "off", size)) {
+		if (!intel_pstate_driver)
+			return -EINVAL;
+
+		if (hwp_active)
+			return -EBUSY;
+
+		return intel_pstate_unregister_driver();
+	}
+
+	if (size == 6 && !strncmp(buf, "active", size)) {
+		if (intel_pstate_driver) {
+			if (intel_pstate_driver == &intel_pstate)
+				return 0;
+
+			ret = intel_pstate_unregister_driver();
+			if (ret)
+				return ret;
+		}
+
+		return intel_pstate_register_driver(&intel_pstate);
+	}
+
+	if (size == 7 && !strncmp(buf, "passive", size)) {
+		if (intel_pstate_driver) {
+			if (intel_pstate_driver == &intel_cpufreq)
+				return 0;
+
+			ret = intel_pstate_unregister_driver();
+			if (ret)
+				return ret;
+		}
+
+		return intel_pstate_register_driver(&intel_cpufreq);
+	}
+
+	return -EINVAL;
+}
+
+static int no_load __initdata;
+static int no_hwp __initdata;
+static int hwp_only __initdata;
+static unsigned int force_load __initdata;
+
+static int __init intel_pstate_msrs_not_valid(void)
+{
+	if (!pstate_funcs.get_max() ||
+	    !pstate_funcs.get_min() ||
+	    !pstate_funcs.get_turbo())
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __init copy_cpu_funcs(struct pstate_funcs *funcs)
+{
+	pstate_funcs.get_max   = funcs->get_max;
+	pstate_funcs.get_max_physical = funcs->get_max_physical;
+	pstate_funcs.get_min   = funcs->get_min;
+	pstate_funcs.get_turbo = funcs->get_turbo;
+	pstate_funcs.get_scaling = funcs->get_scaling;
+	pstate_funcs.get_val   = funcs->get_val;
+	pstate_funcs.get_vid   = funcs->get_vid;
+	pstate_funcs.get_aperf_mperf_shift = funcs->get_aperf_mperf_shift;
+}
+
+#ifdef CONFIG_ACPI
+
+static bool __init intel_pstate_no_acpi_pss(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		acpi_status status;
+		union acpi_object *pss;
+		struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+		struct acpi_processor *pr = per_cpu(processors, i);
+
+		if (!pr)
+			continue;
+
+		status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			continue;
+
+		pss = buffer.pointer;
+		if (pss && pss->type == ACPI_TYPE_PACKAGE) {
+			kfree(pss);
+			return false;
+		}
+
+		kfree(pss);
+	}
+
+	return true;
+}
+
+static bool __init intel_pstate_no_acpi_pcch(void)
+{
+	acpi_status status;
+	acpi_handle handle;
+
+	status = acpi_get_handle(NULL, "\\_SB", &handle);
+	if (ACPI_FAILURE(status))
+		return true;
+
+	return !acpi_has_method(handle, "PCCH");
+}
+
+static bool __init intel_pstate_has_acpi_ppc(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct acpi_processor *pr = per_cpu(processors, i);
+
+		if (!pr)
+			continue;
+		if (acpi_has_method(pr->handle, "_PPC"))
+			return true;
+	}
+	return false;
+}
+
+enum {
+	PSS,
+	PPC,
+};
+
+/* Hardware vendor-specific info that has its own power management modes */
+static struct acpi_platform_list plat_info[] __initdata = {
+	{"HP    ", "ProLiant", 0, ACPI_SIG_FADT, all_versions, 0, PSS},
+	{"ORACLE", "X4-2    ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4-2L   ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4-2B   ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X3-2    ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X3-2L   ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X3-2B   ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4470M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4270M3 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4270M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4170M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4170 M3", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X4275 M3", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "X6-2    ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{"ORACLE", "Sudbury ", 0, ACPI_SIG_FADT, all_versions, 0, PPC},
+	{ } /* End */
+};
+
+static bool __init intel_pstate_platform_pwr_mgmt_exists(void)
+{
+	const struct x86_cpu_id *id;
+	u64 misc_pwr;
+	int idx;
+
+	id = x86_match_cpu(intel_pstate_cpu_oob_ids);
+	if (id) {
+		rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr);
+		if ( misc_pwr & (1 << 8))
+			return true;
+	}
+
+	idx = acpi_match_platform_list(plat_info);
+	if (idx < 0)
+		return false;
+
+	switch (plat_info[idx].data) {
+	case PSS:
+		if (!intel_pstate_no_acpi_pss())
+			return false;
+
+		return intel_pstate_no_acpi_pcch();
+	case PPC:
+		return intel_pstate_has_acpi_ppc() && !force_load;
+	}
+
+	return false;
+}
+
+static void intel_pstate_request_control_from_smm(void)
+{
+	/*
+	 * It may be unsafe to request P-states control from SMM if _PPC support
+	 * has not been enabled.
+	 */
+	if (acpi_ppc)
+		acpi_processor_pstate_control();
+}
+#else /* CONFIG_ACPI not enabled */
+static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; }
+static inline bool intel_pstate_has_acpi_ppc(void) { return false; }
+static inline void intel_pstate_request_control_from_smm(void) {}
+#endif /* CONFIG_ACPI */
+
+#define INTEL_PSTATE_HWP_BROADWELL	0x01
+
+#define ICPU_HWP(model, hwp_mode) \
+	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_HWP, hwp_mode }
+
+static const struct x86_cpu_id hwp_support_ids[] __initconst = {
+	ICPU_HWP(INTEL_FAM6_BROADWELL_X, INTEL_PSTATE_HWP_BROADWELL),
+	ICPU_HWP(INTEL_FAM6_BROADWELL_XEON_D, INTEL_PSTATE_HWP_BROADWELL),
+	ICPU_HWP(X86_MODEL_ANY, 0),
+	{}
+};
+
+static int __init intel_pstate_init(void)
+{
+	const struct x86_cpu_id *id;
+	int rc;
+
+	if (no_load)
+		return -ENODEV;
+
+	id = x86_match_cpu(hwp_support_ids);
+	if (id) {
+		copy_cpu_funcs(&core_funcs);
+		if (!no_hwp) {
+			hwp_active++;
+			hwp_mode_bdw = id->driver_data;
+			intel_pstate.attr = hwp_cpufreq_attrs;
+			goto hwp_cpu_matched;
+		}
+	} else {
+		id = x86_match_cpu(intel_pstate_cpu_ids);
+		if (!id)
+			return -ENODEV;
+
+		copy_cpu_funcs((struct pstate_funcs *)id->driver_data);
+	}
+
+	if (intel_pstate_msrs_not_valid())
+		return -ENODEV;
+
+hwp_cpu_matched:
+	/*
+	 * The Intel pstate driver will be ignored if the platform
+	 * firmware has its own power management modes.
+	 */
+	if (intel_pstate_platform_pwr_mgmt_exists())
+		return -ENODEV;
+
+	if (!hwp_active && hwp_only)
+		return -ENOTSUPP;
+
+	pr_info("Intel P-state driver initializing\n");
+
+	all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus());
+	if (!all_cpu_data)
+		return -ENOMEM;
+
+	intel_pstate_request_control_from_smm();
+
+	intel_pstate_sysfs_expose_params();
+
+	mutex_lock(&intel_pstate_driver_lock);
+	rc = intel_pstate_register_driver(default_driver);
+	mutex_unlock(&intel_pstate_driver_lock);
+	if (rc)
+		return rc;
+
+	if (hwp_active)
+		pr_info("HWP enabled\n");
+
+	return 0;
+}
+device_initcall(intel_pstate_init);
+
+static int __init intel_pstate_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!strcmp(str, "disable")) {
+		no_load = 1;
+	} else if (!strcmp(str, "passive")) {
+		pr_info("Passive mode enabled\n");
+		default_driver = &intel_cpufreq;
+		no_hwp = 1;
+	}
+	if (!strcmp(str, "no_hwp")) {
+		pr_info("HWP disabled\n");
+		no_hwp = 1;
+	}
+	if (!strcmp(str, "force"))
+		force_load = 1;
+	if (!strcmp(str, "hwp_only"))
+		hwp_only = 1;
+	if (!strcmp(str, "per_cpu_perf_limits"))
+		per_cpu_limits = true;
+
+#ifdef CONFIG_ACPI
+	if (!strcmp(str, "support_acpi_ppc"))
+		acpi_ppc = true;
+#endif
+
+	return 0;
+}
+early_param("intel_pstate", intel_pstate_setup);
+
+MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>");
+MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/kirkwood-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/kirkwood-cpufreq.c
new file mode 100644
index 0000000..8d63a6d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/kirkwood-cpufreq.c
@@ -0,0 +1,210 @@
+/*
+ *	kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
+ *
+ *	Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#define CPU_SW_INT_BLK BIT(28)
+
+static struct priv
+{
+	struct clk *cpu_clk;
+	struct clk *ddr_clk;
+	struct clk *powersave_clk;
+	struct device *dev;
+	void __iomem *base;
+} priv;
+
+#define STATE_CPU_FREQ 0x01
+#define STATE_DDR_FREQ 0x02
+
+/*
+ * Kirkwood can swap the clock to the CPU between two clocks:
+ *
+ * - cpu clk
+ * - ddr clk
+ *
+ * The frequencies are set at runtime before registering this table.
+ */
+static struct cpufreq_frequency_table kirkwood_freq_table[] = {
+	{0, STATE_CPU_FREQ,	0}, /* CPU uses cpuclk */
+	{0, STATE_DDR_FREQ,	0}, /* CPU uses ddrclk */
+	{0, 0,			CPUFREQ_TABLE_END},
+};
+
+static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
+{
+	return clk_get_rate(priv.powersave_clk) / 1000;
+}
+
+static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
+			    unsigned int index)
+{
+	unsigned int state = kirkwood_freq_table[index].driver_data;
+	unsigned long reg;
+
+	local_irq_disable();
+
+	/* Disable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg |= CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
+
+	switch (state) {
+	case STATE_CPU_FREQ:
+		clk_set_parent(priv.powersave_clk, priv.cpu_clk);
+		break;
+	case STATE_DDR_FREQ:
+		clk_set_parent(priv.powersave_clk, priv.ddr_clk);
+		break;
+	}
+
+	/* Wait-for-Interrupt, while the hardware changes frequency */
+	cpu_do_idle();
+
+	/* Enable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg &= ~CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+/* Module init and exit code */
+static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
+}
+
+static struct cpufreq_driver kirkwood_cpufreq_driver = {
+	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.get	= kirkwood_cpufreq_get_cpu_frequency,
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = kirkwood_cpufreq_target,
+	.init	= kirkwood_cpufreq_cpu_init,
+	.name	= "kirkwood-cpufreq",
+	.attr	= cpufreq_generic_attr,
+};
+
+static int kirkwood_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	struct resource *res;
+	int err;
+
+	priv.dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv.base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv.base))
+		return PTR_ERR(priv.base);
+
+	np = of_cpu_device_node_get(0);
+	if (!np) {
+		dev_err(&pdev->dev, "failed to get cpu device node\n");
+		return -ENODEV;
+	}
+
+	priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
+	if (IS_ERR(priv.cpu_clk)) {
+		dev_err(priv.dev, "Unable to get cpuclk\n");
+		err = PTR_ERR(priv.cpu_clk);
+		goto out_node;
+	}
+
+	err = clk_prepare_enable(priv.cpu_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare cpuclk\n");
+		goto out_node;
+	}
+
+	kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
+
+	priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
+	if (IS_ERR(priv.ddr_clk)) {
+		dev_err(priv.dev, "Unable to get ddrclk\n");
+		err = PTR_ERR(priv.ddr_clk);
+		goto out_cpu;
+	}
+
+	err = clk_prepare_enable(priv.ddr_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare ddrclk\n");
+		goto out_cpu;
+	}
+	kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
+
+	priv.powersave_clk = of_clk_get_by_name(np, "powersave");
+	if (IS_ERR(priv.powersave_clk)) {
+		dev_err(priv.dev, "Unable to get powersave\n");
+		err = PTR_ERR(priv.powersave_clk);
+		goto out_ddr;
+	}
+	err = clk_prepare_enable(priv.powersave_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare powersave clk\n");
+		goto out_ddr;
+	}
+
+	err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
+	if (err) {
+		dev_err(priv.dev, "Failed to register cpufreq driver\n");
+		goto out_powersave;
+	}
+
+	of_node_put(np);
+	return 0;
+
+out_powersave:
+	clk_disable_unprepare(priv.powersave_clk);
+out_ddr:
+	clk_disable_unprepare(priv.ddr_clk);
+out_cpu:
+	clk_disable_unprepare(priv.cpu_clk);
+out_node:
+	of_node_put(np);
+
+	return err;
+}
+
+static int kirkwood_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
+
+	clk_disable_unprepare(priv.powersave_clk);
+	clk_disable_unprepare(priv.ddr_clk);
+	clk_disable_unprepare(priv.cpu_clk);
+
+	return 0;
+}
+
+static struct platform_driver kirkwood_cpufreq_platform_driver = {
+	.probe = kirkwood_cpufreq_probe,
+	.remove = kirkwood_cpufreq_remove,
+	.driver = {
+		.name = "kirkwood-cpufreq",
+	},
+};
+
+module_platform_driver(kirkwood_cpufreq_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
+MODULE_ALIAS("platform:kirkwood-cpufreq");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.c b/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.c
new file mode 100644
index 0000000..859a62e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.c
@@ -0,0 +1,1002 @@
+/*
+ *  (C) 2001-2004  Dave Jones.
+ *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ *  VIA have currently 3 different versions of Longhaul.
+ *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
+ *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
+ *  Version 2 of longhaul is backward compatible with v1, but adds
+ *   LONGHAUL MSR for purpose of both frequency and voltage scaling.
+ *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
+ *  Version 3 of longhaul got renamed to Powersaver and redesigned
+ *   to use only the POWERSAVER MSR at 0x110a.
+ *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
+ *   It's pretty much the same feature wise to longhaul v2, though
+ *   there is provision for scaling FSB too, but this doesn't work
+ *   too well in practice so we don't even try to use this.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
+#include <acpi/processor.h>
+
+#include "longhaul.h"
+
+#define TYPE_LONGHAUL_V1	1
+#define TYPE_LONGHAUL_V2	2
+#define TYPE_POWERSAVER		3
+
+#define	CPU_SAMUEL	1
+#define	CPU_SAMUEL2	2
+#define	CPU_EZRA	3
+#define	CPU_EZRA_T	4
+#define	CPU_NEHEMIAH	5
+#define	CPU_NEHEMIAH_C	6
+
+/* Flags */
+#define USE_ACPI_C3		(1 << 1)
+#define USE_NORTHBRIDGE		(1 << 2)
+
+static int cpu_model;
+static unsigned int numscales = 16;
+static unsigned int fsb;
+
+static const struct mV_pos *vrm_mV_table;
+static const unsigned char *mV_vrm_table;
+
+static unsigned int highest_speed, lowest_speed; /* kHz */
+static unsigned int minmult, maxmult;
+static int can_scale_voltage;
+static struct acpi_processor *pr;
+static struct acpi_processor_cx *cx;
+static u32 acpi_regs_addr;
+static u8 longhaul_flags;
+static unsigned int longhaul_index;
+
+/* Module parameters */
+static int scale_voltage;
+static int disable_acpi_c3;
+static int revid_errata;
+static int enable;
+
+/* Clock ratios multiplied by 10 */
+static int mults[32];
+static int eblcr[32];
+static int longhaul_version;
+static struct cpufreq_frequency_table *longhaul_table;
+
+static char speedbuffer[8];
+
+static char *print_speed(int speed)
+{
+	if (speed < 1000) {
+		snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
+		return speedbuffer;
+	}
+
+	if (speed%1000 == 0)
+		snprintf(speedbuffer, sizeof(speedbuffer),
+			"%dGHz", speed/1000);
+	else
+		snprintf(speedbuffer, sizeof(speedbuffer),
+			"%d.%dGHz", speed/1000, (speed%1000)/100);
+
+	return speedbuffer;
+}
+
+
+static unsigned int calc_speed(int mult)
+{
+	int khz;
+	khz = (mult/10)*fsb;
+	if (mult%10)
+		khz += fsb/2;
+	khz *= 1000;
+	return khz;
+}
+
+
+static int longhaul_get_cpu_mult(void)
+{
+	unsigned long invalue = 0, lo, hi;
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
+	invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
+	if (longhaul_version == TYPE_LONGHAUL_V2 ||
+	    longhaul_version == TYPE_POWERSAVER) {
+		if (lo & (1<<27))
+			invalue += 16;
+	}
+	return eblcr[invalue];
+}
+
+/* For processor with BCR2 MSR */
+
+static void do_longhaul1(unsigned int mults_index)
+{
+	union msr_bcr2 bcr2;
+
+	rdmsrl(MSR_VIA_BCR2, bcr2.val);
+	/* Enable software clock multiplier */
+	bcr2.bits.ESOFTBF = 1;
+	bcr2.bits.CLOCKMUL = mults_index & 0xff;
+
+	/* Sync to timer tick */
+	safe_halt();
+	/* Change frequency on next halt or sleep */
+	wrmsrl(MSR_VIA_BCR2, bcr2.val);
+	/* Invoke transition */
+	ACPI_FLUSH_CPU_CACHE();
+	halt();
+
+	/* Disable software clock multiplier */
+	local_irq_disable();
+	rdmsrl(MSR_VIA_BCR2, bcr2.val);
+	bcr2.bits.ESOFTBF = 0;
+	wrmsrl(MSR_VIA_BCR2, bcr2.val);
+}
+
+/* For processor with Longhaul MSR */
+
+static void do_powersaver(int cx_address, unsigned int mults_index,
+			  unsigned int dir)
+{
+	union msr_longhaul longhaul;
+	u32 t;
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	/* Setup new frequency */
+	if (!revid_errata)
+		longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+	else
+		longhaul.bits.RevisionKey = 0;
+	longhaul.bits.SoftBusRatio = mults_index & 0xf;
+	longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
+	/* Setup new voltage */
+	if (can_scale_voltage)
+		longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
+	/* Sync to timer tick */
+	safe_halt();
+	/* Raise voltage if necessary */
+	if (can_scale_voltage && dir) {
+		longhaul.bits.EnableSoftVID = 1;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+		/* Change voltage */
+		if (!cx_address) {
+			ACPI_FLUSH_CPU_CACHE();
+			halt();
+		} else {
+			ACPI_FLUSH_CPU_CACHE();
+			/* Invoke C3 */
+			inb(cx_address);
+			/* Dummy op - must do something useless after P_LVL3
+			 * read */
+			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+		}
+		longhaul.bits.EnableSoftVID = 0;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	}
+
+	/* Change frequency on next halt or sleep */
+	longhaul.bits.EnableSoftBusRatio = 1;
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	if (!cx_address) {
+		ACPI_FLUSH_CPU_CACHE();
+		halt();
+	} else {
+		ACPI_FLUSH_CPU_CACHE();
+		/* Invoke C3 */
+		inb(cx_address);
+		/* Dummy op - must do something useless after P_LVL3 read */
+		t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	}
+	/* Disable bus ratio bit */
+	longhaul.bits.EnableSoftBusRatio = 0;
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+
+	/* Reduce voltage if necessary */
+	if (can_scale_voltage && !dir) {
+		longhaul.bits.EnableSoftVID = 1;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+		/* Change voltage */
+		if (!cx_address) {
+			ACPI_FLUSH_CPU_CACHE();
+			halt();
+		} else {
+			ACPI_FLUSH_CPU_CACHE();
+			/* Invoke C3 */
+			inb(cx_address);
+			/* Dummy op - must do something useless after P_LVL3
+			 * read */
+			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+		}
+		longhaul.bits.EnableSoftVID = 0;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	}
+}
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @mults_index : bitpattern of the new multiplier.
+ *
+ * Sets a new clock ratio.
+ */
+
+static int longhaul_setstate(struct cpufreq_policy *policy,
+		unsigned int table_index)
+{
+	unsigned int mults_index;
+	int speed, mult;
+	struct cpufreq_freqs freqs;
+	unsigned long flags;
+	unsigned int pic1_mask, pic2_mask;
+	u16 bm_status = 0;
+	u32 bm_timeout = 1000;
+	unsigned int dir = 0;
+
+	mults_index = longhaul_table[table_index].driver_data;
+	/* Safety precautions */
+	mult = mults[mults_index & 0x1f];
+	if (mult == -1)
+		return -EINVAL;
+
+	speed = calc_speed(mult);
+	if ((speed > highest_speed) || (speed < lowest_speed))
+		return -EINVAL;
+
+	/* Voltage transition before frequency transition? */
+	if (can_scale_voltage && longhaul_index < table_index)
+		dir = 1;
+
+	freqs.old = calc_speed(longhaul_get_cpu_mult());
+	freqs.new = speed;
+
+	pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+			fsb, mult/10, mult%10, print_speed(speed/1000));
+retry_loop:
+	preempt_disable();
+	local_irq_save(flags);
+
+	pic2_mask = inb(0xA1);
+	pic1_mask = inb(0x21);	/* works on C3. save mask. */
+	outb(0xFF, 0xA1);	/* Overkill */
+	outb(0xFE, 0x21);	/* TMR0 only */
+
+	/* Wait while PCI bus is busy. */
+	if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
+	    || ((pr != NULL) && pr->flags.bm_control))) {
+		bm_status = inw(acpi_regs_addr);
+		bm_status &= 1 << 4;
+		while (bm_status && bm_timeout) {
+			outw(1 << 4, acpi_regs_addr);
+			bm_timeout--;
+			bm_status = inw(acpi_regs_addr);
+			bm_status &= 1 << 4;
+		}
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE) {
+		/* Disable AGP and PCI arbiters */
+		outb(3, 0x22);
+	} else if ((pr != NULL) && pr->flags.bm_control) {
+		/* Disable bus master arbitration */
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
+	}
+	switch (longhaul_version) {
+
+	/*
+	 * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
+	 * Software controlled multipliers only.
+	 */
+	case TYPE_LONGHAUL_V1:
+		do_longhaul1(mults_index);
+		break;
+
+	/*
+	 * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
+	 *
+	 * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
+	 * Nehemiah can do FSB scaling too, but this has never been proven
+	 * to work in practice.
+	 */
+	case TYPE_LONGHAUL_V2:
+	case TYPE_POWERSAVER:
+		if (longhaul_flags & USE_ACPI_C3) {
+			/* Don't allow wakeup */
+			acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
+			do_powersaver(cx->address, mults_index, dir);
+		} else {
+			do_powersaver(0, mults_index, dir);
+		}
+		break;
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE) {
+		/* Enable arbiters */
+		outb(0, 0x22);
+	} else if ((pr != NULL) && pr->flags.bm_control) {
+		/* Enable bus master arbitration */
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
+	}
+	outb(pic2_mask, 0xA1);	/* restore mask */
+	outb(pic1_mask, 0x21);
+
+	local_irq_restore(flags);
+	preempt_enable();
+
+	freqs.new = calc_speed(longhaul_get_cpu_mult());
+	/* Check if requested frequency is set. */
+	if (unlikely(freqs.new != speed)) {
+		pr_info("Failed to set requested frequency!\n");
+		/* Revision ID = 1 but processor is expecting revision key
+		 * equal to 0. Jumpers at the bottom of processor will change
+		 * multiplier and FSB, but will not change bits in Longhaul
+		 * MSR nor enable voltage scaling. */
+		if (!revid_errata) {
+			pr_info("Enabling \"Ignore Revision ID\" option\n");
+			revid_errata = 1;
+			msleep(200);
+			goto retry_loop;
+		}
+		/* Why ACPI C3 sometimes doesn't work is a mystery for me.
+		 * But it does happen. Processor is entering ACPI C3 state,
+		 * but it doesn't change frequency. I tried poking various
+		 * bits in northbridge registers, but without success. */
+		if (longhaul_flags & USE_ACPI_C3) {
+			pr_info("Disabling ACPI C3 support\n");
+			longhaul_flags &= ~USE_ACPI_C3;
+			if (revid_errata) {
+				pr_info("Disabling \"Ignore Revision ID\" option\n");
+				revid_errata = 0;
+			}
+			msleep(200);
+			goto retry_loop;
+		}
+		/* This shouldn't happen. Longhaul ver. 2 was reported not
+		 * working on processors without voltage scaling, but with
+		 * RevID = 1. RevID errata will make things right. Just
+		 * to be 100% sure. */
+		if (longhaul_version == TYPE_LONGHAUL_V2) {
+			pr_info("Switching to Longhaul ver. 1\n");
+			longhaul_version = TYPE_LONGHAUL_V1;
+			msleep(200);
+			goto retry_loop;
+		}
+	}
+
+	if (!bm_timeout) {
+		pr_info("Warning: Timeout while waiting for idle PCI bus\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/*
+ * Centaur decided to make life a little more tricky.
+ * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
+ * Samuel2 and above have to try and guess what the FSB is.
+ * We do this by assuming we booted at maximum multiplier, and interpolate
+ * between that value multiplied by possible FSBs and cpu_mhz which
+ * was calculated at boot time. Really ugly, but no other way to do this.
+ */
+
+#define ROUNDING	0xf
+
+static int guess_fsb(int mult)
+{
+	int speed = cpu_khz / 1000;
+	int i;
+	int speeds[] = { 666, 1000, 1333, 2000 };
+	int f_max, f_min;
+
+	for (i = 0; i < 4; i++) {
+		f_max = ((speeds[i] * mult) + 50) / 100;
+		f_max += (ROUNDING / 2);
+		f_min = f_max - ROUNDING;
+		if ((speed <= f_max) && (speed >= f_min))
+			return speeds[i] / 10;
+	}
+	return 0;
+}
+
+
+static int longhaul_get_ranges(void)
+{
+	unsigned int i, j, k = 0;
+	unsigned int ratio;
+	int mult;
+
+	/* Get current frequency */
+	mult = longhaul_get_cpu_mult();
+	if (mult == -1) {
+		pr_info("Invalid (reserved) multiplier!\n");
+		return -EINVAL;
+	}
+	fsb = guess_fsb(mult);
+	if (fsb == 0) {
+		pr_info("Invalid (reserved) FSB!\n");
+		return -EINVAL;
+	}
+	/* Get max multiplier - as we always did.
+	 * Longhaul MSR is useful only when voltage scaling is enabled.
+	 * C3 is booting at max anyway. */
+	maxmult = mult;
+	/* Get min multiplier */
+	switch (cpu_model) {
+	case CPU_NEHEMIAH:
+		minmult = 50;
+		break;
+	case CPU_NEHEMIAH_C:
+		minmult = 40;
+		break;
+	default:
+		minmult = 30;
+		break;
+	}
+
+	pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
+		 minmult/10, minmult%10, maxmult/10, maxmult%10);
+
+	highest_speed = calc_speed(maxmult);
+	lowest_speed = calc_speed(minmult);
+	pr_debug("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+		 print_speed(lowest_speed/1000),
+		 print_speed(highest_speed/1000));
+
+	if (lowest_speed == highest_speed) {
+		pr_info("highestspeed == lowest, aborting\n");
+		return -EINVAL;
+	}
+	if (lowest_speed > highest_speed) {
+		pr_info("nonsense! lowest (%d > %d) !\n",
+			lowest_speed, highest_speed);
+		return -EINVAL;
+	}
+
+	longhaul_table = kzalloc((numscales + 1) * sizeof(*longhaul_table),
+			GFP_KERNEL);
+	if (!longhaul_table)
+		return -ENOMEM;
+
+	for (j = 0; j < numscales; j++) {
+		ratio = mults[j];
+		if (ratio == -1)
+			continue;
+		if (ratio > maxmult || ratio < minmult)
+			continue;
+		longhaul_table[k].frequency = calc_speed(ratio);
+		longhaul_table[k].driver_data	= j;
+		k++;
+	}
+	if (k <= 1) {
+		kfree(longhaul_table);
+		return -ENODEV;
+	}
+	/* Sort */
+	for (j = 0; j < k - 1; j++) {
+		unsigned int min_f, min_i;
+		min_f = longhaul_table[j].frequency;
+		min_i = j;
+		for (i = j + 1; i < k; i++) {
+			if (longhaul_table[i].frequency < min_f) {
+				min_f = longhaul_table[i].frequency;
+				min_i = i;
+			}
+		}
+		if (min_i != j) {
+			swap(longhaul_table[j].frequency,
+			     longhaul_table[min_i].frequency);
+			swap(longhaul_table[j].driver_data,
+			     longhaul_table[min_i].driver_data);
+		}
+	}
+
+	longhaul_table[k].frequency = CPUFREQ_TABLE_END;
+
+	/* Find index we are running on */
+	for (j = 0; j < k; j++) {
+		if (mults[longhaul_table[j].driver_data & 0x1f] == mult) {
+			longhaul_index = j;
+			break;
+		}
+	}
+	return 0;
+}
+
+
+static void longhaul_setup_voltagescaling(void)
+{
+	struct cpufreq_frequency_table *freq_pos;
+	union msr_longhaul longhaul;
+	struct mV_pos minvid, maxvid, vid;
+	unsigned int j, speed, pos, kHz_step, numvscales;
+	int min_vid_speed;
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	if (!(longhaul.bits.RevisionID & 1)) {
+		pr_info("Voltage scaling not supported by CPU\n");
+		return;
+	}
+
+	if (!longhaul.bits.VRMRev) {
+		pr_info("VRM 8.5\n");
+		vrm_mV_table = &vrm85_mV[0];
+		mV_vrm_table = &mV_vrm85[0];
+	} else {
+		pr_info("Mobile VRM\n");
+		if (cpu_model < CPU_NEHEMIAH)
+			return;
+		vrm_mV_table = &mobilevrm_mV[0];
+		mV_vrm_table = &mV_mobilevrm[0];
+	}
+
+	minvid = vrm_mV_table[longhaul.bits.MinimumVID];
+	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
+
+	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
+		pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
+			minvid.mV/1000, minvid.mV%1000,
+			maxvid.mV/1000, maxvid.mV%1000);
+		return;
+	}
+
+	if (minvid.mV == maxvid.mV) {
+		pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
+			maxvid.mV/1000, maxvid.mV%1000);
+		return;
+	}
+
+	/* How many voltage steps*/
+	numvscales = maxvid.pos - minvid.pos + 1;
+	pr_info("Max VID=%d.%03d  Min VID=%d.%03d, %d possible voltage scales\n",
+		maxvid.mV/1000, maxvid.mV%1000,
+		minvid.mV/1000, minvid.mV%1000,
+		numvscales);
+
+	/* Calculate max frequency at min voltage */
+	j = longhaul.bits.MinMHzBR;
+	if (longhaul.bits.MinMHzBR4)
+		j += 16;
+	min_vid_speed = eblcr[j];
+	if (min_vid_speed == -1)
+		return;
+	switch (longhaul.bits.MinMHzFSB) {
+	case 0:
+		min_vid_speed *= 13333;
+		break;
+	case 1:
+		min_vid_speed *= 10000;
+		break;
+	case 3:
+		min_vid_speed *= 6666;
+		break;
+	default:
+		return;
+		break;
+	}
+	if (min_vid_speed >= highest_speed)
+		return;
+	/* Calculate kHz for one voltage step */
+	kHz_step = (highest_speed - min_vid_speed) / numvscales;
+
+	cpufreq_for_each_entry(freq_pos, longhaul_table) {
+		speed = freq_pos->frequency;
+		if (speed > min_vid_speed)
+			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
+		else
+			pos = minvid.pos;
+		freq_pos->driver_data |= mV_vrm_table[pos] << 8;
+		vid = vrm_mV_table[mV_vrm_table[pos]];
+		pr_info("f: %d kHz, index: %d, vid: %d mV\n",
+			speed, (int)(freq_pos - longhaul_table), vid.mV);
+	}
+
+	can_scale_voltage = 1;
+	pr_info("Voltage scaling enabled\n");
+}
+
+
+static int longhaul_target(struct cpufreq_policy *policy,
+			    unsigned int table_index)
+{
+	unsigned int i;
+	unsigned int dir = 0;
+	u8 vid, current_vid;
+	int retval = 0;
+
+	if (!can_scale_voltage)
+		retval = longhaul_setstate(policy, table_index);
+	else {
+		/* On test system voltage transitions exceeding single
+		 * step up or down were turning motherboard off. Both
+		 * "ondemand" and "userspace" are unsafe. C7 is doing
+		 * this in hardware, C3 is old and we need to do this
+		 * in software. */
+		i = longhaul_index;
+		current_vid = (longhaul_table[longhaul_index].driver_data >> 8);
+		current_vid &= 0x1f;
+		if (table_index > longhaul_index)
+			dir = 1;
+		while (i != table_index) {
+			vid = (longhaul_table[i].driver_data >> 8) & 0x1f;
+			if (vid != current_vid) {
+				retval = longhaul_setstate(policy, i);
+				current_vid = vid;
+				msleep(200);
+			}
+			if (dir)
+				i++;
+			else
+				i--;
+		}
+		retval = longhaul_setstate(policy, table_index);
+	}
+
+	longhaul_index = table_index;
+	return retval;
+}
+
+
+static unsigned int longhaul_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return calc_speed(longhaul_get_cpu_mult());
+}
+
+static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
+					  u32 nesting_level,
+					  void *context, void **return_value)
+{
+	struct acpi_device *d;
+
+	if (acpi_bus_get_device(obj_handle, &d))
+		return 0;
+
+	*return_value = acpi_driver_data(d);
+	return 1;
+}
+
+/* VIA don't support PM2 reg, but have something similar */
+static int enable_arbiter_disable(void)
+{
+	struct pci_dev *dev;
+	int status = 1;
+	int reg;
+	u8 pci_cmd;
+
+	/* Find PLE133 host bridge */
+	reg = 0x78;
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
+			     NULL);
+	/* Find PM133/VT8605 host bridge */
+	if (dev == NULL)
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_8605_0, NULL);
+	/* Find CLE266 host bridge */
+	if (dev == NULL) {
+		reg = 0x76;
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_862X_0, NULL);
+		/* Find CN400 V-Link host bridge */
+		if (dev == NULL)
+			dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+	}
+	if (dev != NULL) {
+		/* Enable access to port 0x22 */
+		pci_read_config_byte(dev, reg, &pci_cmd);
+		if (!(pci_cmd & 1<<7)) {
+			pci_cmd |= 1<<7;
+			pci_write_config_byte(dev, reg, pci_cmd);
+			pci_read_config_byte(dev, reg, &pci_cmd);
+			if (!(pci_cmd & 1<<7)) {
+				pr_err("Can't enable access to port 0x22\n");
+				status = 0;
+			}
+		}
+		pci_dev_put(dev);
+		return status;
+	}
+	return 0;
+}
+
+static int longhaul_setup_southbridge(void)
+{
+	struct pci_dev *dev;
+	u8 pci_cmd;
+
+	/* Find VT8235 southbridge */
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
+	if (dev == NULL)
+		/* Find VT8237 southbridge */
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_8237, NULL);
+	if (dev != NULL) {
+		/* Set transition time to max */
+		pci_read_config_byte(dev, 0xec, &pci_cmd);
+		pci_cmd &= ~(1 << 2);
+		pci_write_config_byte(dev, 0xec, pci_cmd);
+		pci_read_config_byte(dev, 0xe4, &pci_cmd);
+		pci_cmd &= ~(1 << 7);
+		pci_write_config_byte(dev, 0xe4, pci_cmd);
+		pci_read_config_byte(dev, 0xe5, &pci_cmd);
+		pci_cmd |= 1 << 7;
+		pci_write_config_byte(dev, 0xe5, pci_cmd);
+		/* Get address of ACPI registers block*/
+		pci_read_config_byte(dev, 0x81, &pci_cmd);
+		if (pci_cmd & 1 << 7) {
+			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
+			acpi_regs_addr &= 0xff00;
+			pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
+		}
+
+		pci_dev_put(dev);
+		return 1;
+	}
+	return 0;
+}
+
+static int longhaul_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	char *cpuname = NULL;
+	int ret;
+	u32 lo, hi;
+
+	/* Check what we have on this motherboard */
+	switch (c->x86_model) {
+	case 6:
+		cpu_model = CPU_SAMUEL;
+		cpuname = "C3 'Samuel' [C5A]";
+		longhaul_version = TYPE_LONGHAUL_V1;
+		memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+		memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
+		break;
+
+	case 7:
+		switch (c->x86_stepping) {
+		case 0:
+			longhaul_version = TYPE_LONGHAUL_V1;
+			cpu_model = CPU_SAMUEL2;
+			cpuname = "C3 'Samuel 2' [C5B]";
+			/* Note, this is not a typo, early Samuel2's had
+			 * Samuel1 ratios. */
+			memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+			memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
+			break;
+		case 1 ... 15:
+			longhaul_version = TYPE_LONGHAUL_V2;
+			if (c->x86_stepping < 8) {
+				cpu_model = CPU_SAMUEL2;
+				cpuname = "C3 'Samuel 2' [C5B]";
+			} else {
+				cpu_model = CPU_EZRA;
+				cpuname = "C3 'Ezra' [C5C]";
+			}
+			memcpy(mults, ezra_mults, sizeof(ezra_mults));
+			memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
+			break;
+		}
+		break;
+
+	case 8:
+		cpu_model = CPU_EZRA_T;
+		cpuname = "C3 'Ezra-T' [C5M]";
+		longhaul_version = TYPE_POWERSAVER;
+		numscales = 32;
+		memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
+		memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
+		break;
+
+	case 9:
+		longhaul_version = TYPE_POWERSAVER;
+		numscales = 32;
+		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
+		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
+		switch (c->x86_stepping) {
+		case 0 ... 1:
+			cpu_model = CPU_NEHEMIAH;
+			cpuname = "C3 'Nehemiah A' [C5XLOE]";
+			break;
+		case 2 ... 4:
+			cpu_model = CPU_NEHEMIAH;
+			cpuname = "C3 'Nehemiah B' [C5XLOH]";
+			break;
+		case 5 ... 15:
+			cpu_model = CPU_NEHEMIAH_C;
+			cpuname = "C3 'Nehemiah C' [C5P]";
+			break;
+		}
+		break;
+
+	default:
+		cpuname = "Unknown";
+		break;
+	}
+	/* Check Longhaul ver. 2 */
+	if (longhaul_version == TYPE_LONGHAUL_V2) {
+		rdmsr(MSR_VIA_LONGHAUL, lo, hi);
+		if (lo == 0 && hi == 0)
+			/* Looks like MSR isn't present */
+			longhaul_version = TYPE_LONGHAUL_V1;
+	}
+
+	pr_info("VIA %s CPU detected.  ", cpuname);
+	switch (longhaul_version) {
+	case TYPE_LONGHAUL_V1:
+	case TYPE_LONGHAUL_V2:
+		pr_cont("Longhaul v%d supported\n", longhaul_version);
+		break;
+	case TYPE_POWERSAVER:
+		pr_cont("Powersaver supported\n");
+		break;
+	};
+
+	/* Doesn't hurt */
+	longhaul_setup_southbridge();
+
+	/* Find ACPI data for processor */
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+				ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
+				NULL, (void *)&pr);
+
+	/* Check ACPI support for C3 state */
+	if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
+		cx = &pr->power.states[ACPI_STATE_C3];
+		if (cx->address > 0 && cx->latency <= 1000)
+			longhaul_flags |= USE_ACPI_C3;
+	}
+	/* Disable if it isn't working */
+	if (disable_acpi_c3)
+		longhaul_flags &= ~USE_ACPI_C3;
+	/* Check if northbridge is friendly */
+	if (enable_arbiter_disable())
+		longhaul_flags |= USE_NORTHBRIDGE;
+
+	/* Check ACPI support for bus master arbiter disable */
+	if (!(longhaul_flags & USE_ACPI_C3
+	     || longhaul_flags & USE_NORTHBRIDGE)
+	    && ((pr == NULL) || !(pr->flags.bm_control))) {
+		pr_err("No ACPI support: Unsupported northbridge\n");
+		return -ENODEV;
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE)
+		pr_info("Using northbridge support\n");
+	if (longhaul_flags & USE_ACPI_C3)
+		pr_info("Using ACPI support\n");
+
+	ret = longhaul_get_ranges();
+	if (ret != 0)
+		return ret;
+
+	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
+		longhaul_setup_voltagescaling();
+
+	policy->transition_delay_us = 200000;	/* usec */
+
+	return cpufreq_table_validate_and_show(policy, longhaul_table);
+}
+
+static struct cpufreq_driver longhaul_driver = {
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = longhaul_target,
+	.get	= longhaul_get,
+	.init	= longhaul_cpu_init,
+	.name	= "longhaul",
+	.attr	= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id longhaul_id[] = {
+	{ X86_VENDOR_CENTAUR, 6 },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
+
+static int __init longhaul_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (!x86_match_cpu(longhaul_id))
+		return -ENODEV;
+
+	if (!enable) {
+		pr_err("Option \"enable\" not set - Aborting\n");
+		return -ENODEV;
+	}
+#ifdef CONFIG_SMP
+	if (num_online_cpus() > 1) {
+		pr_err("More than 1 CPU detected, longhaul disabled\n");
+		return -ENODEV;
+	}
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	if (boot_cpu_has(X86_FEATURE_APIC)) {
+		pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
+		return -ENODEV;
+	}
+#endif
+	switch (c->x86_model) {
+	case 6 ... 9:
+		return cpufreq_register_driver(&longhaul_driver);
+	case 10:
+		pr_err("Use acpi-cpufreq driver for VIA C7\n");
+	default:
+		;
+	}
+
+	return -ENODEV;
+}
+
+
+static void __exit longhaul_exit(void)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
+	int i;
+
+	for (i = 0; i < numscales; i++) {
+		if (mults[i] == maxmult) {
+			struct cpufreq_freqs freqs;
+
+			freqs.old = policy->cur;
+			freqs.new = longhaul_table[i].frequency;
+			freqs.flags = 0;
+
+			cpufreq_freq_transition_begin(policy, &freqs);
+			longhaul_setstate(policy, i);
+			cpufreq_freq_transition_end(policy, &freqs, 0);
+			break;
+		}
+	}
+
+	cpufreq_cpu_put(policy);
+	cpufreq_unregister_driver(&longhaul_driver);
+	kfree(longhaul_table);
+}
+
+/* Even if BIOS is exporting ACPI C3 state, and it is used
+ * with success when CPU is idle, this state doesn't
+ * trigger frequency transition in some cases. */
+module_param(disable_acpi_c3, int, 0644);
+MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
+/* Change CPU voltage with frequency. Very useful to save
+ * power, but most VIA C3 processors aren't supporting it. */
+module_param(scale_voltage, int, 0644);
+MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+/* Force revision key to 0 for processors which doesn't
+ * support voltage scaling, but are introducing itself as
+ * such. */
+module_param(revid_errata, int, 0644);
+MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
+/* By default driver is disabled to prevent incompatible
+ * system freeze. */
+module_param(enable, int, 0644);
+MODULE_PARM_DESC(enable, "Enable driver");
+
+MODULE_AUTHOR("Dave Jones");
+MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE("GPL");
+
+late_initcall(longhaul_init);
+module_exit(longhaul_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.h b/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.h
new file mode 100644
index 0000000..1928b92
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/longhaul.h
@@ -0,0 +1,353 @@
+/*
+ *  longhaul.h
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  VIA-specific information
+ */
+
+union msr_bcr2 {
+	struct {
+		unsigned Reseved:19,	// 18:0
+		ESOFTBF:1,		// 19
+		Reserved2:3,		// 22:20
+		CLOCKMUL:4,		// 26:23
+		Reserved3:5;		// 31:27
+	} bits;
+	unsigned long val;
+};
+
+union msr_longhaul {
+	struct {
+		unsigned RevisionID:4,	// 3:0
+		RevisionKey:4,		// 7:4
+		EnableSoftBusRatio:1,	// 8
+		EnableSoftVID:1,	// 9
+		EnableSoftBSEL:1,	// 10
+		Reserved:3,		// 11:13
+		SoftBusRatio4:1,	// 14
+		VRMRev:1,		// 15
+		SoftBusRatio:4,		// 19:16
+		SoftVID:5,		// 24:20
+		Reserved2:3,		// 27:25
+		SoftBSEL:2,		// 29:28
+		Reserved3:2,		// 31:30
+		MaxMHzBR:4,		// 35:32
+		MaximumVID:5,		// 40:36
+		MaxMHzFSB:2,		// 42:41
+		MaxMHzBR4:1,		// 43
+		Reserved4:4,		// 47:44
+		MinMHzBR:4,		// 51:48
+		MinimumVID:5,		// 56:52
+		MinMHzFSB:2,		// 58:57
+		MinMHzBR4:1,		// 59
+		Reserved5:4;		// 63:60
+	} bits;
+	unsigned long long val;
+};
+
+/*
+ * Clock ratio tables. Div/Mod by 10 to get ratio.
+ * The eblcr values specify the ratio read from the CPU.
+ * The mults values specify what to write to the CPU.
+ */
+
+/*
+ * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
+ */
+static const int samuel1_mults[16] = {
+	-1, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	-1, /* 0100 -> RESERVED */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	55, /* 0111 ->  5.5x */
+	60, /* 1000 ->  6.0x */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	50, /* 1011 ->  5.0x */
+	65, /* 1100 ->  6.5x */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	-1, /* 1111 -> RESERVED */
+};
+
+static const int samuel1_eblcr[16] = {
+	50, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	55, /* 0100 ->  5.5x */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	-1, /* 0111 -> RESERVED */
+	-1, /* 1000 -> RESERVED */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	60, /* 1011 ->  6.0x */
+	-1, /* 1100 -> RESERVED */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	65, /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Samuel2 Stepping 1->15
+ */
+static const int samuel2_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	110, /* 0111 -> 11.0x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	130, /* 1110 -> 13.0x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Ezra
+ */
+static const int ezra_mults[16] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+};
+
+static const int ezra_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 (Ezra-T) [C5M].
+ */
+static const int ezrat_mults[32] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 ->  12.0x */
+
+	-1,  /* 0000 -> RESERVED (10.0x) */
+	110, /* 0001 -> 11.0x */
+	-1, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (9.0x)*/
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	-1,  /* 1111 -> RESERVED (12.0x) */
+};
+
+static const int ezrat_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+
+	-1,  /* 0000 -> RESERVED (9.0x) */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (10.0x)*/
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	-1,  /* 1100 -> RESERVED (12.0x) */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145, /* 1111 -> 14.5x */
+};
+
+/*
+ * VIA C3 Nehemiah */
+
+static const int nehemiah_mults[32] = {
+	100, /* 0000 -> 10.0x */
+	-1, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+	-1, /* 0000 -> 10.0x */
+	110, /* 0001 -> 11.0x */
+	-1, /* 0010 -> 12.0x */
+	-1,  /* 0011 ->  9.0x */
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	-1, /* 1111 -> 12.0x */
+};
+
+static const int nehemiah_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	160, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+	90,  /* 0000 ->  9.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	100, /* 0011 -> 10.0x */
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	120, /* 1100 -> 12.0x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145 /* 1111 -> 14.5x */
+};
+
+/*
+ * Voltage scales. Div/Mod by 1000 to get actual voltage.
+ * Which scale to use depends on the VRM type in use.
+ */
+
+struct mV_pos {
+	unsigned short mV;
+	unsigned short pos;
+};
+
+static const struct mV_pos vrm85_mV[32] = {
+	{1250, 8},	{1200, 6},	{1150, 4},	{1100, 2},
+	{1050, 0},	{1800, 30},	{1750, 28},	{1700, 26},
+	{1650, 24},	{1600, 22},	{1550, 20},	{1500, 18},
+	{1450, 16},	{1400, 14},	{1350, 12},	{1300, 10},
+	{1275, 9},	{1225, 7},	{1175, 5},	{1125, 3},
+	{1075, 1},	{1825, 31},	{1775, 29},	{1725, 27},
+	{1675, 25},	{1625, 23},	{1575, 21},	{1525, 19},
+	{1475, 17},	{1425, 15},	{1375, 13},	{1325, 11}
+};
+
+static const unsigned char mV_vrm85[32] = {
+	0x04,	0x14,	0x03,	0x13,	0x02,	0x12,	0x01,	0x11,
+	0x00,	0x10,	0x0f,	0x1f,	0x0e,	0x1e,	0x0d,	0x1d,
+	0x0c,	0x1c,	0x0b,	0x1b,	0x0a,	0x1a,	0x09,	0x19,
+	0x08,	0x18,	0x07,	0x17,	0x06,	0x16,	0x05,	0x15
+};
+
+static const struct mV_pos mobilevrm_mV[32] = {
+	{1750, 31},	{1700, 30},	{1650, 29},	{1600, 28},
+	{1550, 27},	{1500, 26},	{1450, 25},	{1400, 24},
+	{1350, 23},	{1300, 22},	{1250, 21},	{1200, 20},
+	{1150, 19},	{1100, 18},	{1050, 17},	{1000, 16},
+	{975, 15},	{950, 14},	{925, 13},	{900, 12},
+	{875, 11},	{850, 10},	{825, 9},	{800, 8},
+	{775, 7},	{750, 6},	{725, 5},	{700, 4},
+	{675, 3},	{650, 2},	{625, 1},	{600, 0}
+};
+
+static const unsigned char mV_mobilevrm[32] = {
+	0x1f,	0x1e,	0x1d,	0x1c,	0x1b,	0x1a,	0x19,	0x18,
+	0x17,	0x16,	0x15,	0x14,	0x13,	0x12,	0x11,	0x10,
+	0x0f,	0x0e,	0x0d,	0x0c,	0x0b,	0x0a,	0x09,	0x08,
+	0x07,	0x06,	0x05,	0x04,	0x03,	0x02,	0x01,	0x00
+};
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/longrun.c b/src/kernel/linux/v4.14/drivers/cpufreq/longrun.c
new file mode 100644
index 0000000..542aa9a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/longrun.c
@@ -0,0 +1,323 @@
+/*
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/timex.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
+
+static struct cpufreq_driver	longrun_driver;
+
+/**
+ * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
+ * values into per cent values. In TMTA microcode, the following is valid:
+ * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int longrun_low_freq, longrun_high_freq;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void longrun_get_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
+	if (msr_lo & 0x01)
+		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	else
+		policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+	msr_lo &= 0x0000007F;
+	msr_hi &= 0x0000007F;
+
+	if (longrun_high_freq <= longrun_low_freq) {
+		/* Assume degenerate Longrun table */
+		policy->min = policy->max = longrun_high_freq;
+	} else {
+		policy->min = longrun_low_freq + msr_lo *
+			((longrun_high_freq - longrun_low_freq) / 100);
+		policy->max = longrun_low_freq + msr_hi *
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+	policy->cpu = 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static int longrun_set_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+	u32 pctg_lo, pctg_hi;
+
+	if (!policy)
+		return -EINVAL;
+
+	if (longrun_high_freq <= longrun_low_freq) {
+		/* Assume degenerate Longrun table */
+		pctg_lo = pctg_hi = 100;
+	} else {
+		pctg_lo = (policy->min - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+		pctg_hi = (policy->max - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+
+	if (pctg_hi > 100)
+		pctg_hi = 100;
+	if (pctg_lo > pctg_hi)
+		pctg_lo = pctg_hi;
+
+	/* performance or economy mode */
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFFFE;
+	switch (policy->policy) {
+	case CPUFREQ_POLICY_PERFORMANCE:
+		msr_lo |= 0x00000001;
+		break;
+	case CPUFREQ_POLICY_POWERSAVE:
+		break;
+	}
+	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+	/* lower and upper boundary */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFF80;
+	msr_hi &= 0xFFFFFF80;
+	msr_lo |= pctg_lo;
+	msr_hi |= pctg_hi;
+	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+	return 0;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ * @policy: the policy to verify
+ *
+ * Validates a new CPUFreq policy. This function has to be called with
+ * cpufreq_driver locked.
+ */
+static int longrun_verify_policy(struct cpufreq_policy *policy)
+{
+	if (!policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_cpu_limits(policy);
+
+	if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+	    (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+		return -EINVAL;
+
+	return 0;
+}
+
+static unsigned int longrun_get(unsigned int cpu)
+{
+	u32 eax, ebx, ecx, edx;
+
+	if (cpu)
+		return 0;
+
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	pr_debug("cpuid eax is %u\n", eax);
+
+	return eax * 1000;
+}
+
+/**
+ * longrun_determine_freqs - determines the lowest and highest possible core frequency
+ * @low_freq: an int to put the lowest frequency into
+ * @high_freq: an int to put the highest frequency into
+ *
+ * Determines the lowest and highest possible core frequencies on this CPU.
+ * This is necessary to calculate the performance percentage according to
+ * TMTA rules:
+ * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
+ */
+static int longrun_determine_freqs(unsigned int *low_freq,
+						      unsigned int *high_freq)
+{
+	u32 msr_lo, msr_hi;
+	u32 save_lo, save_hi;
+	u32 eax, ebx, ecx, edx;
+	u32 try_hi;
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (!low_freq || !high_freq)
+		return -EINVAL;
+
+	if (cpu_has(c, X86_FEATURE_LRTI)) {
+		/* if the LongRun Table Interface is present, the
+		 * detection is a bit easier:
+		 * For minimum frequency, read out the maximum
+		 * level (msr_hi), write that into "currently
+		 * selected level", and read out the frequency.
+		 * For maximum frequency, read out level zero.
+		 */
+		/* minimum */
+		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
+		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*low_freq = msr_lo * 1000; /* to kHz */
+
+		/* maximum */
+		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*high_freq = msr_lo * 1000; /* to kHz */
+
+		pr_debug("longrun table interface told %u - %u kHz\n",
+				*low_freq, *high_freq);
+
+		if (*low_freq > *high_freq)
+			*low_freq = *high_freq;
+		return 0;
+	}
+
+	/* set the upper border to the value determined during TSC init */
+	*high_freq = (cpu_khz / 1000);
+	*high_freq = *high_freq * 1000;
+	pr_debug("high frequency is %u kHz\n", *high_freq);
+
+	/* get current borders */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	save_lo = msr_lo & 0x0000007F;
+	save_hi = msr_hi & 0x0000007F;
+
+	/* if current perf_pctg is larger than 90%, we need to decrease the
+	 * upper limit to make the calculation more accurate.
+	 */
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	/* try decreasing in 10% steps, some processors react only
+	 * on some barrier values */
+	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
+		/* set to 0 to try_hi perf_pctg */
+		msr_lo &= 0xFFFFFF80;
+		msr_hi &= 0xFFFFFF80;
+		msr_hi |= try_hi;
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+		/* read out current core MHz and current perf_pctg */
+		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+
+		/* restore values */
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
+	}
+	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+
+	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+	 * eqals
+	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+	 *
+	 * high_freq * perf_pctg is stored tempoarily into "ebx".
+	 */
+	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
+
+	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
+		return -EIO;
+
+	edx = ((eax - ebx) * 100) / (100 - ecx);
+	*low_freq = edx * 1000; /* back to kHz */
+
+	pr_debug("low frequency is %u kHz\n", *low_freq);
+
+	if (*low_freq > *high_freq)
+		*low_freq = *high_freq;
+
+	return 0;
+}
+
+
+static int longrun_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* detect low and high frequency */
+	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
+	if (result)
+		return result;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = longrun_low_freq;
+	policy->cpuinfo.max_freq = longrun_high_freq;
+	longrun_get_policy(policy);
+
+	return 0;
+}
+
+
+static struct cpufreq_driver longrun_driver = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= longrun_verify_policy,
+	.setpolicy	= longrun_set_policy,
+	.get		= longrun_get,
+	.init		= longrun_cpu_init,
+	.name		= "longrun",
+};
+
+static const struct x86_cpu_id longrun_ids[] = {
+	{ X86_VENDOR_TRANSMETA, X86_FAMILY_ANY, X86_MODEL_ANY,
+	  X86_FEATURE_LONGRUN },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, longrun_ids);
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+	if (!x86_match_cpu(longrun_ids))
+		return -ENODEV;
+	return cpufreq_register_driver(&longrun_driver);
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+	cpufreq_unregister_driver(&longrun_driver);
+}
+
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
+		"Efficeon processors.");
+MODULE_LICENSE("GPL");
+
+module_init(longrun_init);
+module_exit(longrun_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/loongson1-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/loongson1-cpufreq.c
new file mode 100644
index 0000000..be89416
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/loongson1-cpufreq.c
@@ -0,0 +1,222 @@
+/*
+ * CPU Frequency Scaling for Loongson 1 SoC
+ *
+ * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <cpufreq.h>
+#include <loongson1.h>
+
+struct ls1x_cpufreq {
+	struct device *dev;
+	struct clk *clk;	/* CPU clk */
+	struct clk *mux_clk;	/* MUX of CPU clk */
+	struct clk *pll_clk;	/* PLL clk */
+	struct clk *osc_clk;	/* OSC clk */
+	unsigned int max_freq;
+	unsigned int min_freq;
+};
+
+static struct ls1x_cpufreq *cpufreq;
+
+static int ls1x_cpufreq_notifier(struct notifier_block *nb,
+				 unsigned long val, void *data)
+{
+	if (val == CPUFREQ_POSTCHANGE)
+		current_cpu_data.udelay_val = loops_per_jiffy;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block ls1x_cpufreq_notifier_block = {
+	.notifier_call = ls1x_cpufreq_notifier
+};
+
+static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
+			       unsigned int index)
+{
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
+	unsigned int old_freq, new_freq;
+
+	old_freq = policy->cur;
+	new_freq = policy->freq_table[index].frequency;
+
+	/*
+	 * The procedure of reconfiguring CPU clk is as below.
+	 *
+	 *  - Reparent CPU clk to OSC clk
+	 *  - Reset CPU clock (very important)
+	 *  - Reconfigure CPU DIV
+	 *  - Reparent CPU clk back to CPU DIV clk
+	 */
+
+	clk_set_parent(policy->clk, cpufreq->osc_clk);
+	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU,
+		     LS1X_CLK_PLL_DIV);
+	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU),
+		     LS1X_CLK_PLL_DIV);
+	clk_set_rate(cpufreq->mux_clk, new_freq * 1000);
+	clk_set_parent(policy->clk, cpufreq->mux_clk);
+	dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
+
+	return 0;
+}
+
+static int ls1x_cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
+	struct cpufreq_frequency_table *freq_tbl;
+	unsigned int pll_freq, freq;
+	int steps, i, ret;
+
+	pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000;
+
+	steps = 1 << DIV_CPU_WIDTH;
+	freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL);
+	if (!freq_tbl)
+		return -ENOMEM;
+
+	for (i = 0; i < (steps - 1); i++) {
+		freq = pll_freq / (i + 1);
+		if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq))
+			freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			freq_tbl[i].frequency = freq;
+		dev_dbg(cpu_dev,
+			"cpufreq table: index %d: frequency %d\n", i,
+			freq_tbl[i].frequency);
+	}
+	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+	policy->clk = cpufreq->clk;
+	ret = cpufreq_generic_init(policy, freq_tbl, 0);
+	if (ret)
+		kfree(freq_tbl);
+
+	return ret;
+}
+
+static int ls1x_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	kfree(policy->freq_table);
+	return 0;
+}
+
+static struct cpufreq_driver ls1x_cpufreq_driver = {
+	.name		= "cpufreq-ls1x",
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= ls1x_cpufreq_target,
+	.get		= cpufreq_generic_get,
+	.init		= ls1x_cpufreq_init,
+	.exit		= ls1x_cpufreq_exit,
+	.attr		= cpufreq_generic_attr,
+};
+
+static int ls1x_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+	cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+
+	return 0;
+}
+
+static int ls1x_cpufreq_probe(struct platform_device *pdev)
+{
+	struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev);
+	struct clk *clk;
+	int ret;
+
+	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -EINVAL;
+	}
+
+	cpufreq =
+	    devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL);
+	if (!cpufreq)
+		return -ENOMEM;
+
+	cpufreq->dev = &pdev->dev;
+
+	clk = devm_clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get %s clock\n",
+			pdata->clk_name);
+		return PTR_ERR(clk);
+	}
+	cpufreq->clk = clk;
+
+	clk = clk_get_parent(clk);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->clk));
+		return PTR_ERR(clk);
+	}
+	cpufreq->mux_clk = clk;
+
+	clk = clk_get_parent(clk);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->mux_clk));
+		return PTR_ERR(clk);
+	}
+	cpufreq->pll_clk = clk;
+
+	clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get %s clock\n",
+			pdata->osc_clk_name);
+		return PTR_ERR(clk);
+	}
+	cpufreq->osc_clk = clk;
+
+	cpufreq->max_freq = pdata->max_freq;
+	cpufreq->min_freq = pdata->min_freq;
+
+	ret = cpufreq_register_driver(&ls1x_cpufreq_driver);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register CPUFreq driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register CPUFreq notifier: %d\n",ret);
+		cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+	}
+
+	return ret;
+}
+
+static struct platform_driver ls1x_cpufreq_platdrv = {
+	.probe	= ls1x_cpufreq_probe,
+	.remove	= ls1x_cpufreq_remove,
+	.driver	= {
+		.name	= "ls1x-cpufreq",
+	},
+};
+
+module_platform_driver(ls1x_cpufreq_platdrv);
+
+MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 CPUFreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/loongson2_cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/loongson2_cpufreq.c
new file mode 100644
index 0000000..da34469
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/loongson2_cpufreq.c
@@ -0,0 +1,196 @@
+/*
+ * Cpufreq driver for the loongson-2 processors
+ *
+ * The 2E revision of loongson processor not support this feature.
+ *
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/clock.h>
+#include <asm/idle.h>
+
+#include <asm/mach-loongson64/loongson.h>
+
+static uint nowait;
+
+static void (*saved_cpu_wait) (void);
+
+static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data);
+
+static struct notifier_block loongson2_cpufreq_notifier_block = {
+	.notifier_call = loongson2_cpu_freq_notifier
+};
+
+static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	if (val == CPUFREQ_POSTCHANGE)
+		current_cpu_data.udelay_val = loops_per_jiffy;
+
+	return 0;
+}
+
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
+				     unsigned int index)
+{
+	unsigned int freq;
+
+	freq =
+	    ((cpu_clock_freq / 1000) *
+	     loongson2_clockmod_table[index].driver_data) / 8;
+
+	/* setting the cpu frequency */
+	clk_set_rate(policy->clk, freq * 1000);
+
+	return 0;
+}
+
+static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct clk *cpuclk;
+	int i;
+	unsigned long rate;
+	int ret;
+
+	cpuclk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(cpuclk)) {
+		pr_err("couldn't get CPU clk\n");
+		return PTR_ERR(cpuclk);
+	}
+
+	rate = cpu_clock_freq / 1000;
+	if (!rate) {
+		clk_put(cpuclk);
+		return -EINVAL;
+	}
+
+	/* clock table init */
+	for (i = 2;
+	     (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END);
+	     i++)
+		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
+
+	ret = clk_set_rate(cpuclk, rate * 1000);
+	if (ret) {
+		clk_put(cpuclk);
+		return ret;
+	}
+
+	policy->clk = cpuclk;
+	return cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
+}
+
+static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	clk_put(policy->clk);
+	return 0;
+}
+
+static struct cpufreq_driver loongson2_cpufreq_driver = {
+	.name = "loongson2",
+	.init = loongson2_cpufreq_cpu_init,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = loongson2_cpufreq_target,
+	.get = cpufreq_generic_get,
+	.exit = loongson2_cpufreq_exit,
+	.attr = cpufreq_generic_attr,
+};
+
+static const struct platform_device_id platform_device_ids[] = {
+	{
+		.name = "loongson2_cpufreq",
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(platform, platform_device_ids);
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = "loongson2_cpufreq",
+	},
+	.id_table = platform_device_ids,
+};
+
+/*
+ * This is the simple version of Loongson-2 wait, Maybe we need do this in
+ * interrupt disabled context.
+ */
+
+static DEFINE_SPINLOCK(loongson2_wait_lock);
+
+static void loongson2_cpu_wait(void)
+{
+	unsigned long flags;
+	u32 cpu_freq;
+
+	spin_lock_irqsave(&loongson2_wait_lock, flags);
+	cpu_freq = LOONGSON_CHIPCFG(0);
+	LOONGSON_CHIPCFG(0) &= ~0x7;	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG(0) = cpu_freq;	/* Restore CPU state */
+	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
+	local_irq_enable();
+}
+
+static int __init cpufreq_init(void)
+{
+	int ret;
+
+	/* Register platform stuff */
+	ret = platform_driver_register(&platform_driver);
+	if (ret)
+		return ret;
+
+	pr_info("Loongson-2F CPU frequency driver\n");
+
+	cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+
+	ret = cpufreq_register_driver(&loongson2_cpufreq_driver);
+
+	if (!ret && !nowait) {
+		saved_cpu_wait = cpu_wait;
+		cpu_wait = loongson2_cpu_wait;
+	}
+
+	return ret;
+}
+
+static void __exit cpufreq_exit(void)
+{
+	if (!nowait && saved_cpu_wait)
+		cpu_wait = saved_cpu_wait;
+	cpufreq_unregister_driver(&loongson2_cpufreq_driver);
+	cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	platform_driver_unregister(&platform_driver);
+}
+
+module_init(cpufreq_init);
+module_exit(cpufreq_exit);
+
+module_param(nowait, uint, 0644);
+MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait");
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson2F");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/maple-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/maple-cpufreq.c
new file mode 100644
index 0000000..d9df893
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/maple-cpufreq.c
@@ -0,0 +1,247 @@
+/*
+ *  Copyright (C) 2011 Dmitry Eremin-Solenikov
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#undef DEBUG
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/time.h>
+#include <linux/of_device.h>
+
+#define DBG(fmt...) pr_debug(fmt)
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001			/* PCR scom addr */
+
+#define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
+#define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
+#define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
+#define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
+#define PCR_SPEED_SHIFT		17
+#define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
+#define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
+#define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
+#define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
+#define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
+
+#define SCOM_PSR 0x408001			/* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
+#define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
+#define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
+#define PSR_CUR_SPEED_SHIFT	(56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table maple_cpu_freqs[] = {
+	{0, CPUFREQ_HIGH,		0},
+	{0, CPUFREQ_LOW,		0},
+	{0, 0,				CPUFREQ_TABLE_END},
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retrieved from the device-tree
+ */
+static int maple_pmode_cur;
+
+static const u32 *maple_pmode_data;
+static int maple_pmode_max;
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int maple_scom_switch_freq(int speed_mode)
+{
+	unsigned long flags;
+	int to;
+
+	local_irq_save(flags);
+
+	/* Clear PCR high */
+	scom970_write(SCOM_PCR, 0);
+	/* Clear PCR low */
+	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+	/* Set PCR low */
+	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+		      maple_pmode_data[speed_mode]);
+
+	/* Wait for completion */
+	for (to = 0; to < 10; to++) {
+		unsigned long psr = scom970_read(SCOM_PSR);
+
+		if ((psr & PSR_CMD_RECEIVED) == 0 &&
+		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+		    == 0)
+			break;
+		if (psr & PSR_CMD_COMPLETED)
+			break;
+		udelay(100);
+	}
+
+	local_irq_restore(flags);
+
+	maple_pmode_cur = speed_mode;
+	ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	return 0;
+}
+
+static int maple_scom_query_freq(void)
+{
+	unsigned long psr = scom970_read(SCOM_PSR);
+	int i;
+
+	for (i = 0; i <= maple_pmode_max; i++)
+		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+			break;
+	return i;
+}
+
+/*
+ * Common interface to the cpufreq core
+ */
+
+static int maple_cpufreq_target(struct cpufreq_policy *policy,
+	unsigned int index)
+{
+	return maple_scom_switch_freq(index);
+}
+
+static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
+{
+	return maple_cpu_freqs[maple_pmode_cur].frequency;
+}
+
+static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
+}
+
+static struct cpufreq_driver maple_cpufreq_driver = {
+	.name		= "maple",
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= maple_cpufreq_cpu_init,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= maple_cpufreq_target,
+	.get		= maple_cpufreq_get_speed,
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init maple_cpufreq_init(void)
+{
+	struct device_node *cpunode;
+	unsigned int psize;
+	unsigned long max_freq;
+	const u32 *valp;
+	u32 pvr_hi;
+	int rc = -ENODEV;
+
+	/*
+	 * Behave here like powermac driver which checks machine compatibility
+	 * to ease merging of two drivers in future.
+	 */
+	if (!of_machine_is_compatible("Momentum,Maple") &&
+	    !of_machine_is_compatible("Momentum,Apache"))
+		return 0;
+
+	/* Get first CPU node */
+	cpunode = of_cpu_device_node_get(0);
+	if (cpunode == NULL) {
+		pr_err("Can't find any CPU 0 node\n");
+		goto bail_noprops;
+	}
+
+	/* Check 970FX for now */
+	/* we actually don't care on which CPU to access PVR */
+	pvr_hi = PVR_VER(mfspr(SPRN_PVR));
+	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+		pr_err("Unsupported CPU version (%x)\n", pvr_hi);
+		goto bail_noprops;
+	}
+
+	/* Look for the powertune data in the device-tree */
+	/*
+	 * On Maple this property is provided by PIBS in dual-processor config,
+	 * not provided by PIBS in CPU0 config and also not provided by SLOF,
+	 * so YMMV
+	 */
+	maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
+	if (!maple_pmode_data) {
+		DBG("No power-mode-data !\n");
+		goto bail_noprops;
+	}
+	maple_pmode_max = psize / sizeof(u32) - 1;
+
+	/*
+	 * From what I see, clock-frequency is always the maximal frequency.
+	 * The current driver can not slew sysclk yet, so we really only deal
+	 * with powertune steps for now. We also only implement full freq and
+	 * half freq in this version. So far, I haven't yet seen a machine
+	 * supporting anything else.
+	 */
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!valp)
+		return -ENODEV;
+	max_freq = (*valp)/1000;
+	maple_cpu_freqs[0].frequency = max_freq;
+	maple_cpu_freqs[1].frequency = max_freq/2;
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	msleep(10);
+	maple_pmode_cur = -1;
+	maple_scom_switch_freq(maple_scom_query_freq());
+
+	pr_info("Registering Maple CPU frequency driver\n");
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		maple_cpu_freqs[1].frequency/1000,
+		maple_cpu_freqs[0].frequency/1000,
+		maple_cpu_freqs[maple_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&maple_cpufreq_driver);
+
+	of_node_put(cpunode);
+
+	return rc;
+
+bail_noprops:
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+module_init(maple_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/mediatek-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/mediatek-cpufreq.c
new file mode 100644
index 0000000..18c4bd9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/mediatek-cpufreq.c
@@ -0,0 +1,622 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define MIN_VOLT_SHIFT		(100000)
+#define MAX_VOLT_SHIFT		(200000)
+#define MAX_VOLT_LIMIT		(1150000)
+#define VOLT_TOL		(10000)
+
+/*
+ * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS
+ * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in
+ * Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two
+ * voltage inputs need to be controlled under a hardware limitation:
+ * 100mV < Vsram - Vproc < 200mV
+ *
+ * When scaling the clock frequency of a CPU clock domain, the clock source
+ * needs to be switched to another stable PLL clock temporarily until
+ * the original PLL becomes stable at target frequency.
+ */
+struct mtk_cpu_dvfs_info {
+	struct cpumask cpus;
+	struct device *cpu_dev;
+	struct regulator *proc_reg;
+	struct regulator *sram_reg;
+	struct clk *cpu_clk;
+	struct clk *inter_clk;
+	struct thermal_cooling_device *cdev;
+	struct list_head list_head;
+	int intermediate_voltage;
+	bool need_voltage_tracking;
+};
+
+static LIST_HEAD(dvfs_info_list);
+
+static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
+{
+	struct mtk_cpu_dvfs_info *info;
+
+	list_for_each_entry(info, &dvfs_info_list, list_head) {
+		if (cpumask_test_cpu(cpu, &info->cpus))
+			return info;
+	}
+
+	return NULL;
+}
+
+static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
+					int new_vproc)
+{
+	struct regulator *proc_reg = info->proc_reg;
+	struct regulator *sram_reg = info->sram_reg;
+	int old_vproc, old_vsram, new_vsram, vsram, vproc, ret;
+
+	old_vproc = regulator_get_voltage(proc_reg);
+	if (old_vproc < 0) {
+		pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
+		return old_vproc;
+	}
+	/* Vsram should not exceed the maximum allowed voltage of SoC. */
+	new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT);
+
+	if (old_vproc < new_vproc) {
+		/*
+		 * When scaling up voltages, Vsram and Vproc scale up step
+		 * by step. At each step, set Vsram to (Vproc + 200mV) first,
+		 * then set Vproc to (Vsram - 100mV).
+		 * Keep doing it until Vsram and Vproc hit target voltages.
+		 */
+		do {
+			old_vsram = regulator_get_voltage(sram_reg);
+			if (old_vsram < 0) {
+				pr_err("%s: invalid Vsram value: %d\n",
+				       __func__, old_vsram);
+				return old_vsram;
+			}
+			old_vproc = regulator_get_voltage(proc_reg);
+			if (old_vproc < 0) {
+				pr_err("%s: invalid Vproc value: %d\n",
+				       __func__, old_vproc);
+				return old_vproc;
+			}
+
+			vsram = min(new_vsram, old_vproc + MAX_VOLT_SHIFT);
+
+			if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
+				vsram = MAX_VOLT_LIMIT;
+
+				/*
+				 * If the target Vsram hits the maximum voltage,
+				 * try to set the exact voltage value first.
+				 */
+				ret = regulator_set_voltage(sram_reg, vsram,
+							    vsram);
+				if (ret)
+					ret = regulator_set_voltage(sram_reg,
+							vsram - VOLT_TOL,
+							vsram);
+
+				vproc = new_vproc;
+			} else {
+				ret = regulator_set_voltage(sram_reg, vsram,
+							    vsram + VOLT_TOL);
+
+				vproc = vsram - MIN_VOLT_SHIFT;
+			}
+			if (ret)
+				return ret;
+
+			ret = regulator_set_voltage(proc_reg, vproc,
+						    vproc + VOLT_TOL);
+			if (ret) {
+				regulator_set_voltage(sram_reg, old_vsram,
+						      old_vsram);
+				return ret;
+			}
+		} while (vproc < new_vproc || vsram < new_vsram);
+	} else if (old_vproc > new_vproc) {
+		/*
+		 * When scaling down voltages, Vsram and Vproc scale down step
+		 * by step. At each step, set Vproc to (Vsram - 200mV) first,
+		 * then set Vproc to (Vproc + 100mV).
+		 * Keep doing it until Vsram and Vproc hit target voltages.
+		 */
+		do {
+			old_vproc = regulator_get_voltage(proc_reg);
+			if (old_vproc < 0) {
+				pr_err("%s: invalid Vproc value: %d\n",
+				       __func__, old_vproc);
+				return old_vproc;
+			}
+			old_vsram = regulator_get_voltage(sram_reg);
+			if (old_vsram < 0) {
+				pr_err("%s: invalid Vsram value: %d\n",
+				       __func__, old_vsram);
+				return old_vsram;
+			}
+
+			vproc = max(new_vproc, old_vsram - MAX_VOLT_SHIFT);
+			ret = regulator_set_voltage(proc_reg, vproc,
+						    vproc + VOLT_TOL);
+			if (ret)
+				return ret;
+
+			if (vproc == new_vproc)
+				vsram = new_vsram;
+			else
+				vsram = max(new_vsram, vproc + MIN_VOLT_SHIFT);
+
+			if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
+				vsram = MAX_VOLT_LIMIT;
+
+				/*
+				 * If the target Vsram hits the maximum voltage,
+				 * try to set the exact voltage value first.
+				 */
+				ret = regulator_set_voltage(sram_reg, vsram,
+							    vsram);
+				if (ret)
+					ret = regulator_set_voltage(sram_reg,
+							vsram - VOLT_TOL,
+							vsram);
+			} else {
+				ret = regulator_set_voltage(sram_reg, vsram,
+							    vsram + VOLT_TOL);
+			}
+
+			if (ret) {
+				regulator_set_voltage(proc_reg, old_vproc,
+						      old_vproc);
+				return ret;
+			}
+		} while (vproc > new_vproc + VOLT_TOL ||
+			 vsram > new_vsram + VOLT_TOL);
+	}
+
+	return 0;
+}
+
+static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc)
+{
+	if (info->need_voltage_tracking)
+		return mtk_cpufreq_voltage_tracking(info, vproc);
+	else
+		return regulator_set_voltage(info->proc_reg, vproc,
+					     vproc + VOLT_TOL);
+}
+
+static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
+				  unsigned int index)
+{
+	struct cpufreq_frequency_table *freq_table = policy->freq_table;
+	struct clk *cpu_clk = policy->clk;
+	struct clk *armpll = clk_get_parent(cpu_clk);
+	struct mtk_cpu_dvfs_info *info = policy->driver_data;
+	struct device *cpu_dev = info->cpu_dev;
+	struct dev_pm_opp *opp;
+	long freq_hz, old_freq_hz;
+	int vproc, old_vproc, inter_vproc, target_vproc, ret;
+
+	inter_vproc = info->intermediate_voltage;
+
+	old_freq_hz = clk_get_rate(cpu_clk);
+	old_vproc = regulator_get_voltage(info->proc_reg);
+	if (old_vproc < 0) {
+		pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
+		return old_vproc;
+	}
+
+	freq_hz = freq_table[index].frequency * 1000;
+
+	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
+	if (IS_ERR(opp)) {
+		pr_err("cpu%d: failed to find OPP for %ld\n",
+		       policy->cpu, freq_hz);
+		return PTR_ERR(opp);
+	}
+	vproc = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	/*
+	 * If the new voltage or the intermediate voltage is higher than the
+	 * current voltage, scale up voltage first.
+	 */
+	target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
+	if (old_vproc < target_vproc) {
+		ret = mtk_cpufreq_set_voltage(info, target_vproc);
+		if (ret) {
+			pr_err("cpu%d: failed to scale up voltage!\n",
+			       policy->cpu);
+			mtk_cpufreq_set_voltage(info, old_vproc);
+			return ret;
+		}
+	}
+
+	/* Reparent the CPU clock to intermediate clock. */
+	ret = clk_set_parent(cpu_clk, info->inter_clk);
+	if (ret) {
+		pr_err("cpu%d: failed to re-parent cpu clock!\n",
+		       policy->cpu);
+		mtk_cpufreq_set_voltage(info, old_vproc);
+		WARN_ON(1);
+		return ret;
+	}
+
+	/* Set the original PLL to target rate. */
+	ret = clk_set_rate(armpll, freq_hz);
+	if (ret) {
+		pr_err("cpu%d: failed to scale cpu clock rate!\n",
+		       policy->cpu);
+		clk_set_parent(cpu_clk, armpll);
+		mtk_cpufreq_set_voltage(info, old_vproc);
+		return ret;
+	}
+
+	/* Set parent of CPU clock back to the original PLL. */
+	ret = clk_set_parent(cpu_clk, armpll);
+	if (ret) {
+		pr_err("cpu%d: failed to re-parent cpu clock!\n",
+		       policy->cpu);
+		mtk_cpufreq_set_voltage(info, inter_vproc);
+		WARN_ON(1);
+		return ret;
+	}
+
+	/*
+	 * If the new voltage is lower than the intermediate voltage or the
+	 * original voltage, scale down to the new voltage.
+	 */
+	if (vproc < inter_vproc || vproc < old_vproc) {
+		ret = mtk_cpufreq_set_voltage(info, vproc);
+		if (ret) {
+			pr_err("cpu%d: failed to scale down voltage!\n",
+			       policy->cpu);
+			clk_set_parent(cpu_clk, info->inter_clk);
+			clk_set_rate(armpll, old_freq_hz);
+			clk_set_parent(cpu_clk, armpll);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#define DYNAMIC_POWER "dynamic-power-coefficient"
+
+static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct mtk_cpu_dvfs_info *info = policy->driver_data;
+	struct device_node *np = of_node_get(info->cpu_dev->of_node);
+	u32 capacitance = 0;
+
+	if (WARN_ON(!np))
+		return;
+
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		of_property_read_u32(np, DYNAMIC_POWER, &capacitance);
+
+		info->cdev = of_cpufreq_power_cooling_register(np,
+						policy, capacitance, NULL);
+
+		if (IS_ERR(info->cdev)) {
+			dev_err(info->cpu_dev,
+				"running cpufreq without cooling device: %ld\n",
+				PTR_ERR(info->cdev));
+
+			info->cdev = NULL;
+		}
+	}
+
+	of_node_put(np);
+}
+
+static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
+{
+	struct device *cpu_dev;
+	struct regulator *proc_reg = ERR_PTR(-ENODEV);
+	struct regulator *sram_reg = ERR_PTR(-ENODEV);
+	struct clk *cpu_clk = ERR_PTR(-ENODEV);
+	struct clk *inter_clk = ERR_PTR(-ENODEV);
+	struct dev_pm_opp *opp;
+	unsigned long rate;
+	int ret;
+
+	cpu_dev = get_cpu_device(cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", cpu);
+		return -ENODEV;
+	}
+
+	cpu_clk = clk_get(cpu_dev, "cpu");
+	if (IS_ERR(cpu_clk)) {
+		if (PTR_ERR(cpu_clk) == -EPROBE_DEFER)
+			pr_warn("cpu clk for cpu%d not ready, retry.\n", cpu);
+		else
+			pr_err("failed to get cpu clk for cpu%d\n", cpu);
+
+		ret = PTR_ERR(cpu_clk);
+		return ret;
+	}
+
+	inter_clk = clk_get(cpu_dev, "intermediate");
+	if (IS_ERR(inter_clk)) {
+		if (PTR_ERR(inter_clk) == -EPROBE_DEFER)
+			pr_warn("intermediate clk for cpu%d not ready, retry.\n",
+				cpu);
+		else
+			pr_err("failed to get intermediate clk for cpu%d\n",
+			       cpu);
+
+		ret = PTR_ERR(inter_clk);
+		goto out_free_resources;
+	}
+
+	proc_reg = regulator_get_exclusive(cpu_dev, "proc");
+	if (IS_ERR(proc_reg)) {
+		if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
+			pr_warn("proc regulator for cpu%d not ready, retry.\n",
+				cpu);
+		else
+			pr_err("failed to get proc regulator for cpu%d\n",
+			       cpu);
+
+		ret = PTR_ERR(proc_reg);
+		goto out_free_resources;
+	}
+
+	/* Both presence and absence of sram regulator are valid cases. */
+	sram_reg = regulator_get_exclusive(cpu_dev, "sram");
+
+	/* Get OPP-sharing information from "operating-points-v2" bindings */
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus);
+	if (ret) {
+		pr_err("failed to get OPP-sharing information for cpu%d\n",
+		       cpu);
+		goto out_free_resources;
+	}
+
+	ret = dev_pm_opp_of_cpumask_add_table(&info->cpus);
+	if (ret) {
+		pr_warn("no OPP table for cpu%d\n", cpu);
+		goto out_free_resources;
+	}
+
+	/* Search a safe voltage for intermediate frequency. */
+	rate = clk_get_rate(inter_clk);
+	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
+	if (IS_ERR(opp)) {
+		pr_err("failed to get intermediate opp for cpu%d\n", cpu);
+		ret = PTR_ERR(opp);
+		goto out_free_opp_table;
+	}
+	info->intermediate_voltage = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	info->cpu_dev = cpu_dev;
+	info->proc_reg = proc_reg;
+	info->sram_reg = IS_ERR(sram_reg) ? NULL : sram_reg;
+	info->cpu_clk = cpu_clk;
+	info->inter_clk = inter_clk;
+
+	/*
+	 * If SRAM regulator is present, software "voltage tracking" is needed
+	 * for this CPU power domain.
+	 */
+	info->need_voltage_tracking = !IS_ERR(sram_reg);
+
+	return 0;
+
+out_free_opp_table:
+	dev_pm_opp_of_cpumask_remove_table(&info->cpus);
+
+out_free_resources:
+	if (!IS_ERR(proc_reg))
+		regulator_put(proc_reg);
+	if (!IS_ERR(sram_reg))
+		regulator_put(sram_reg);
+	if (!IS_ERR(cpu_clk))
+		clk_put(cpu_clk);
+	if (!IS_ERR(inter_clk))
+		clk_put(inter_clk);
+
+	return ret;
+}
+
+static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
+{
+	if (!IS_ERR(info->proc_reg))
+		regulator_put(info->proc_reg);
+	if (!IS_ERR(info->sram_reg))
+		regulator_put(info->sram_reg);
+	if (!IS_ERR(info->cpu_clk))
+		clk_put(info->cpu_clk);
+	if (!IS_ERR(info->inter_clk))
+		clk_put(info->inter_clk);
+
+	dev_pm_opp_of_cpumask_remove_table(&info->cpus);
+}
+
+static int mtk_cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct mtk_cpu_dvfs_info *info;
+	struct cpufreq_frequency_table *freq_table;
+	int ret;
+
+	info = mtk_cpu_dvfs_info_lookup(policy->cpu);
+	if (!info) {
+		pr_err("dvfs info for cpu%d is not initialized.\n",
+		       policy->cpu);
+		return -EINVAL;
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table);
+	if (ret) {
+		pr_err("failed to init cpufreq table for cpu%d: %d\n",
+		       policy->cpu, ret);
+		return ret;
+	}
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		pr_err("%s: invalid frequency table: %d\n", __func__, ret);
+		goto out_free_cpufreq_table;
+	}
+
+	cpumask_copy(policy->cpus, &info->cpus);
+	policy->driver_data = info;
+	policy->clk = info->cpu_clk;
+
+	return 0;
+
+out_free_cpufreq_table:
+	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &freq_table);
+	return ret;
+}
+
+static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	struct mtk_cpu_dvfs_info *info = policy->driver_data;
+
+	cpufreq_cooling_unregister(info->cdev);
+	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
+
+	return 0;
+}
+
+static struct cpufreq_driver mtk_cpufreq_driver = {
+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = mtk_cpufreq_set_target,
+	.get = cpufreq_generic_get,
+	.init = mtk_cpufreq_init,
+	.exit = mtk_cpufreq_exit,
+	.ready = mtk_cpufreq_ready,
+	.name = "mtk-cpufreq",
+	.attr = cpufreq_generic_attr,
+};
+
+static int mtk_cpufreq_probe(struct platform_device *pdev)
+{
+	struct mtk_cpu_dvfs_info *info, *tmp;
+	int cpu, ret;
+
+	for_each_possible_cpu(cpu) {
+		info = mtk_cpu_dvfs_info_lookup(cpu);
+		if (info)
+			continue;
+
+		info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+		if (!info) {
+			ret = -ENOMEM;
+			goto release_dvfs_info_list;
+		}
+
+		ret = mtk_cpu_dvfs_info_init(info, cpu);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to initialize dvfs info for cpu%d\n",
+				cpu);
+			goto release_dvfs_info_list;
+		}
+
+		list_add(&info->list_head, &dvfs_info_list);
+	}
+
+	ret = cpufreq_register_driver(&mtk_cpufreq_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n");
+		goto release_dvfs_info_list;
+	}
+
+	return 0;
+
+release_dvfs_info_list:
+	list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) {
+		mtk_cpu_dvfs_info_release(info);
+		list_del(&info->list_head);
+	}
+
+	return ret;
+}
+
+static struct platform_driver mtk_cpufreq_platdrv = {
+	.driver = {
+		.name	= "mtk-cpufreq",
+	},
+	.probe		= mtk_cpufreq_probe,
+};
+
+/* List of machines supported by this driver */
+static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7622", },
+	{ .compatible = "mediatek,mt7623", },
+	{ .compatible = "mediatek,mt817x", },
+	{ .compatible = "mediatek,mt8173", },
+	{ .compatible = "mediatek,mt8176", },
+
+	{ }
+};
+
+static int __init mtk_cpufreq_driver_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct platform_device *pdev;
+	int err;
+
+	np = of_find_node_by_path("/");
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(mtk_cpufreq_machines, np);
+	of_node_put(np);
+	if (!match) {
+		pr_warn("Machine is not compatible with mtk-cpufreq\n");
+		return -ENODEV;
+	}
+
+	err = platform_driver_register(&mtk_cpufreq_platdrv);
+	if (err)
+		return err;
+
+	/*
+	 * Since there's no place to hold device registration code and no
+	 * device tree based way to match cpufreq driver yet, both the driver
+	 * and the device registration codes are put here to handle defer
+	 * probing.
+	 */
+	pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("failed to register mtk-cpufreq platform device\n");
+		return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+device_initcall(mtk_cpufreq_driver_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/mvebu-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/mvebu-cpufreq.c
new file mode 100644
index 0000000..ed915ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/mvebu-cpufreq.c
@@ -0,0 +1,107 @@
+/*
+ * CPUFreq support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012-2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/resource.h>
+
+static int __init armada_xp_pmsu_cpufreq_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret, cpu;
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return 0;
+
+	/*
+	 * In order to have proper cpufreq handling, we need to ensure
+	 * that the Device Tree description of the CPU clock includes
+	 * the definition of the PMU DFS registers. If not, we do not
+	 * register the clock notifier and the cpufreq driver. This
+	 * piece of code is only for compatibility with old Device
+	 * Trees.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
+	if (!np)
+		return 0;
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
+		of_node_put(np);
+		return 0;
+	}
+
+	of_node_put(np);
+
+	/*
+	 * For each CPU, this loop registers the operating points
+	 * supported (which are the nominal CPU frequency and half of
+	 * it), and registers the clock notifier that will take care
+	 * of doing the PMSU part of a frequency transition.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev;
+		struct clk *clk;
+		int ret;
+
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("Cannot get CPU %d\n", cpu);
+			continue;
+		}
+
+		clk = clk_get(cpu_dev, NULL);
+		if (IS_ERR(clk)) {
+			pr_err("Cannot get clock for CPU %d\n", cpu);
+			return PTR_ERR(clk);
+		}
+
+		/*
+		 * In case of a failure of dev_pm_opp_add(), we don't
+		 * bother with cleaning up the registered OPP (there's
+		 * no function to do so), and simply cancel the
+		 * registration of the cpufreq device.
+		 */
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+	}
+
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	return 0;
+}
+device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/omap-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/omap-cpufreq.c
new file mode 100644
index 0000000..71e81bb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/omap-cpufreq.c
@@ -0,0 +1,206 @@
+/*
+ *  CPU frequency scaling for OMAP using OPP information
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
+ * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pm_opp.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cpu.h>
+
+/* OPP tolerance in percentage */
+#define	OPP_TOLERANCE	4
+
+static struct cpufreq_frequency_table *freq_table;
+static atomic_t freq_table_users = ATOMIC_INIT(0);
+static struct device *mpu_dev;
+static struct regulator *mpu_reg;
+
+static int omap_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	int r, ret;
+	struct dev_pm_opp *opp;
+	unsigned long freq, volt = 0, volt_old = 0, tol = 0;
+	unsigned int old_freq, new_freq;
+
+	old_freq = policy->cur;
+	new_freq = freq_table[index].frequency;
+
+	freq = new_freq * 1000;
+	ret = clk_round_rate(policy->clk, freq);
+	if (ret < 0) {
+		dev_warn(mpu_dev,
+			 "CPUfreq: Cannot find matching frequency for %lu\n",
+			 freq);
+		return ret;
+	}
+	freq = ret;
+
+	if (mpu_reg) {
+		opp = dev_pm_opp_find_freq_ceil(mpu_dev, &freq);
+		if (IS_ERR(opp)) {
+			dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
+				__func__, new_freq);
+			return -EINVAL;
+		}
+		volt = dev_pm_opp_get_voltage(opp);
+		dev_pm_opp_put(opp);
+		tol = volt * OPP_TOLERANCE / 100;
+		volt_old = regulator_get_voltage(mpu_reg);
+	}
+
+	dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", 
+		old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+		new_freq / 1000, volt ? volt / 1000 : -1);
+
+	/* scaling up?  scale voltage before frequency */
+	if (mpu_reg && (new_freq > old_freq)) {
+		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
+		if (r < 0) {
+			dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
+				 __func__);
+			return r;
+		}
+	}
+
+	ret = clk_set_rate(policy->clk, new_freq * 1000);
+
+	/* scaling down?  scale voltage after frequency */
+	if (mpu_reg && (new_freq < old_freq)) {
+		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
+		if (r < 0) {
+			dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
+				 __func__);
+			clk_set_rate(policy->clk, old_freq * 1000);
+			return r;
+		}
+	}
+
+	return ret;
+}
+
+static inline void freq_table_free(void)
+{
+	if (atomic_dec_and_test(&freq_table_users))
+		dev_pm_opp_free_cpufreq_table(mpu_dev, &freq_table);
+}
+
+static int omap_cpu_init(struct cpufreq_policy *policy)
+{
+	int result;
+
+	policy->clk = clk_get(NULL, "cpufreq_ck");
+	if (IS_ERR(policy->clk))
+		return PTR_ERR(policy->clk);
+
+	if (!freq_table) {
+		result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table);
+		if (result) {
+			dev_err(mpu_dev,
+				"%s: cpu%d: failed creating freq table[%d]\n",
+				__func__, policy->cpu, result);
+			goto fail;
+		}
+	}
+
+	atomic_inc_return(&freq_table_users);
+
+	/* FIXME: what's the actual transition time? */
+	result = cpufreq_generic_init(policy, freq_table, 300 * 1000);
+	if (!result)
+		return 0;
+
+	freq_table_free();
+fail:
+	clk_put(policy->clk);
+	return result;
+}
+
+static int omap_cpu_exit(struct cpufreq_policy *policy)
+{
+	freq_table_free();
+	clk_put(policy->clk);
+	return 0;
+}
+
+static struct cpufreq_driver omap_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= omap_target,
+	.get		= cpufreq_generic_get,
+	.init		= omap_cpu_init,
+	.exit		= omap_cpu_exit,
+	.name		= "omap",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int omap_cpufreq_probe(struct platform_device *pdev)
+{
+	mpu_dev = get_cpu_device(0);
+	if (!mpu_dev) {
+		pr_warn("%s: unable to get the MPU device\n", __func__);
+		return -EINVAL;
+	}
+
+	mpu_reg = regulator_get(mpu_dev, "vcc");
+	if (IS_ERR(mpu_reg)) {
+		pr_warn("%s: unable to get MPU regulator\n", __func__);
+		mpu_reg = NULL;
+	} else {
+		/* 
+		 * Ensure physical regulator is present.
+		 * (e.g. could be dummy regulator.)
+		 */
+		if (regulator_get_voltage(mpu_reg) < 0) {
+			pr_warn("%s: physical regulator not present for MPU\n",
+				__func__);
+			regulator_put(mpu_reg);
+			mpu_reg = NULL;
+		}
+	}
+
+	return cpufreq_register_driver(&omap_driver);
+}
+
+static int omap_cpufreq_remove(struct platform_device *pdev)
+{
+	return cpufreq_unregister_driver(&omap_driver);
+}
+
+static struct platform_driver omap_cpufreq_platdrv = {
+	.driver = {
+		.name	= "omap-cpufreq",
+	},
+	.probe		= omap_cpufreq_probe,
+	.remove		= omap_cpufreq_remove,
+};
+module_platform_driver(omap_cpufreq_platdrv);
+
+MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/p4-clockmod.c b/src/kernel/linux/v4.14/drivers/cpufreq/p4-clockmod.c
new file mode 100644
index 0000000..a25741b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/p4-clockmod.c
@@ -0,0 +1,277 @@
+/*
+ *	Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ *	(C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ *	(C) 2002 Tora T. Engstad
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *
+ *	Date		Errata			Description
+ *	20020525	N44, O17	12.5% or 25% DC causes lockup
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/timex.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/timer.h>
+#include <asm/cpu_device_id.h>
+
+#include "speedstep-lib.h"
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+	DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+	DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES	8
+
+
+static int has_N44_O17_errata[NR_CPUS];
+static unsigned int stock_freq;
+static struct cpufreq_driver p4clockmod_driver;
+static unsigned int cpufreq_p4_get(unsigned int cpu);
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+	u32 l, h;
+
+	if ((newstate > DC_DISABLE) || (newstate == DC_RESV))
+		return -EINVAL;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
+
+	if (l & 0x01)
+		pr_debug("CPU#%d currently thermal throttled\n", cpu);
+
+	if (has_N44_O17_errata[cpu] &&
+	    (newstate == DC_25PT || newstate == DC_DFLT))
+		newstate = DC_38PT;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
+	if (newstate == DC_DISABLE) {
+		pr_debug("CPU#%d disabling modulation\n", cpu);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+	} else {
+		pr_debug("CPU#%d setting duty cycle to %d%%\n",
+			cpu, ((125 * newstate) / 10));
+		/* bits 63 - 5	: reserved
+		 * bit  4	: enable/disable
+		 * bits 3-1	: duty cycle
+		 * bit  0	: reserved
+		 */
+		l = (l & ~14);
+		l = l | (1<<4) | ((newstate & 0x7)<<1);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
+	}
+
+	return 0;
+}
+
+
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+	{0, DC_RESV, CPUFREQ_ENTRY_INVALID},
+	{0, DC_DFLT, 0},
+	{0, DC_25PT, 0},
+	{0, DC_38PT, 0},
+	{0, DC_50PT, 0},
+	{0, DC_64PT, 0},
+	{0, DC_75PT, 0},
+	{0, DC_88PT, 0},
+	{0, DC_DISABLE, 0},
+	{0, DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
+static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	int i;
+
+	/* run on each logical CPU,
+	 * see section 13.15.3 of IA32 Intel Architecture Software
+	 * Developer's Manual, Volume 3
+	 */
+	for_each_cpu(i, policy->cpus)
+		cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);
+
+	return 0;
+}
+
+
+static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x06) {
+		if (cpu_has(c, X86_FEATURE_EST))
+			pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
+		switch (c->x86_model) {
+		case 0x0E: /* Core */
+		case 0x0F: /* Core Duo */
+		case 0x16: /* Celeron Core */
+		case 0x1C: /* Atom */
+			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
+		case 0x0D: /* Pentium M (Dothan) */
+			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+			/* fall through */
+		case 0x09: /* Pentium M (Banias) */
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
+		}
+	}
+
+	if (c->x86 != 0xF)
+		return 0;
+
+	/* on P-4s, the TSC runs with constant frequency independent whether
+	 * throttling is active or not. */
+	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
+		pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
+		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
+	}
+
+	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
+}
+
+
+
+static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
+	int cpuid = 0;
+	unsigned int i;
+
+#ifdef CONFIG_SMP
+	cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
+#endif
+
+	/* Errata workaround */
+	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
+	switch (cpuid) {
+	case 0x0f07:
+	case 0x0f0a:
+	case 0x0f11:
+	case 0x0f12:
+		has_N44_O17_errata[policy->cpu] = 1;
+		pr_debug("has errata -- disabling low frequencies\n");
+	}
+
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
+	    c->x86_model < 2) {
+		/* switch to maximum frequency and measure result */
+		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+		recalibrate_cpu_khz();
+	}
+	/* get max frequency */
+	stock_freq = cpufreq_p4_get_frequency(c);
+	if (!stock_freq)
+		return -EINVAL;
+
+	/* table init */
+	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
+			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			p4clockmod_table[i].frequency = (stock_freq * i)/8;
+	}
+
+	/* cpuinfo and default policy values */
+
+	/* the transition latency is set to be 1 higher than the maximum
+	 * transition latency of the ondemand governor */
+	policy->cpuinfo.transition_latency = 10000001;
+
+	return cpufreq_table_validate_and_show(policy, &p4clockmod_table[0]);
+}
+
+
+static unsigned int cpufreq_p4_get(unsigned int cpu)
+{
+	u32 l, h;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
+
+	if (l & 0x10) {
+		l = l >> 1;
+		l &= 0x7;
+	} else
+		l = DC_DISABLE;
+
+	if (l != DC_DISABLE)
+		return stock_freq * l / 8;
+
+	return stock_freq;
+}
+
+static struct cpufreq_driver p4clockmod_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= cpufreq_p4_target,
+	.init		= cpufreq_p4_cpu_init,
+	.get		= cpufreq_p4_get,
+	.name		= "p4-clockmod",
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id cpufreq_p4_id[] = {
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
+	{}
+};
+
+/*
+ * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
+ * be auto loaded.  Please don't add one.
+ */
+
+static int __init cpufreq_p4_init(void)
+{
+	int ret;
+
+	/*
+	 * THERM_CONTROL is architectural for IA32 now, so
+	 * we can rely on the capability checks
+	 */
+	if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
+		return -ENODEV;
+
+	ret = cpufreq_register_driver(&p4clockmod_driver);
+	if (!ret)
+		pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+
+	return ret;
+}
+
+
+static void __exit cpufreq_p4_exit(void)
+{
+	cpufreq_unregister_driver(&p4clockmod_driver);
+}
+
+
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
+
+late_initcall(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pasemi-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pasemi-cpufreq.c
new file mode 100644
index 0000000..d1bdd8f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pasemi-cpufreq.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Authors: Egor Martovetsky <egor@pasemi.com>
+ *	    Olof Johansson <olof@lixom.net>
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+
+#include <asm/hw_irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+
+#define SDCASR_REG		0x0100
+#define SDCASR_REG_STRIDE	0x1000
+#define SDCPWR_CFGA0_REG	0x0100
+#define SDCPWR_PWST0_REG	0x0000
+#define SDCPWR_GIZTIME_REG	0x0440
+
+/* SDCPWR_GIZTIME_REG fields */
+#define SDCPWR_GIZTIME_GR	0x80000000
+#define SDCPWR_GIZTIME_LONGLOCK	0x000000ff
+
+/* Offset of ASR registers from SDC base */
+#define SDCASR_OFFSET		0x120000
+
+static void __iomem *sdcpwr_mapbase;
+static void __iomem *sdcasr_mapbase;
+
+/* Current astate, is used when waking up from power savings on
+ * one core, in case the other core has switched states during
+ * the idle time.
+ */
+static int current_astate;
+
+/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
+static struct cpufreq_frequency_table pas_freqs[] = {
+	{0, 0,	0},
+	{0, 1,	0},
+	{0, 2,	0},
+	{0, 3,	0},
+	{0, 4,	0},
+	{0, 0,	CPUFREQ_TABLE_END},
+};
+
+/*
+ * hardware specific functions
+ */
+
+static int get_astate_freq(int astate)
+{
+	u32 ret;
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
+
+	return ret & 0x3f;
+}
+
+static int get_cur_astate(int cpu)
+{
+	u32 ret;
+
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
+	ret = (ret >> (cpu * 4)) & 0x7;
+
+	return ret;
+}
+
+static int get_gizmo_latency(void)
+{
+	u32 giztime, ret;
+
+	giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
+
+	/* just provide the upper bound */
+	if (giztime & SDCPWR_GIZTIME_GR)
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
+	else
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
+
+	return ret;
+}
+
+static void set_astate(int cpu, unsigned int astate)
+{
+	unsigned long flags;
+
+	/* Return if called before init has run */
+	if (unlikely(!sdcasr_mapbase))
+		return;
+
+	local_irq_save(flags);
+
+	out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
+
+	local_irq_restore(flags);
+}
+
+int check_astate(void)
+{
+	return get_cur_astate(hard_smp_processor_id());
+}
+
+void restore_astate(int cpu)
+{
+	set_astate(cpu, current_astate);
+}
+
+/*
+ * cpufreq functions
+ */
+
+static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pos;
+	const u32 *max_freqp;
+	u32 max_freq;
+	int cur_astate;
+	struct resource res;
+	struct device_node *cpu, *dn;
+	int err = -ENODEV;
+
+	cpu = of_get_cpu_node(policy->cpu, NULL);
+	if (!cpu)
+		goto out;
+
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+	of_node_put(cpu);
+	if (!max_freqp) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
+
+	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-sdc");
+	if (!dn)
+		goto out;
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out;
+	sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
+	if (!sdcasr_mapbase) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-gizmo");
+	if (!dn) {
+		err = -ENODEV;
+		goto out_unmap_sdcasr;
+	}
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out_unmap_sdcasr;
+	sdcpwr_mapbase = ioremap(res.start, 0x1000);
+	if (!sdcpwr_mapbase) {
+		err = -EINVAL;
+		goto out_unmap_sdcasr;
+	}
+
+	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
+	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
+	pr_debug("initializing frequency table\n");
+
+	/* initialize frequency table */
+	cpufreq_for_each_entry(pos, pas_freqs) {
+		pos->frequency = get_astate_freq(pos->driver_data) * 100000;
+		pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency);
+	}
+
+	cur_astate = get_cur_astate(policy->cpu);
+	pr_debug("current astate is at %d\n",cur_astate);
+
+	policy->cur = pas_freqs[cur_astate].frequency;
+	ppc_proc_freq = policy->cur * 1000ul;
+
+	return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
+
+out_unmap_sdcasr:
+	iounmap(sdcasr_mapbase);
+out:
+	return err;
+}
+
+static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state >= SYSTEM_RUNNING)
+		return 0;
+
+	if (sdcasr_mapbase)
+		iounmap(sdcasr_mapbase);
+	if (sdcpwr_mapbase)
+		iounmap(sdcpwr_mapbase);
+
+	return 0;
+}
+
+static int pas_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int pas_astate_new)
+{
+	int i;
+
+	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
+		 policy->cpu,
+		 pas_freqs[pas_astate_new].frequency,
+		 pas_freqs[pas_astate_new].driver_data);
+
+	current_astate = pas_astate_new;
+
+	for_each_online_cpu(i)
+		set_astate(i, pas_astate_new);
+
+	ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul;
+	return 0;
+}
+
+static struct cpufreq_driver pas_cpufreq_driver = {
+	.name		= "pas-cpufreq",
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= pas_cpufreq_cpu_init,
+	.exit		= pas_cpufreq_cpu_exit,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= pas_cpufreq_target,
+	.attr		= cpufreq_generic_attr,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init pas_cpufreq_init(void)
+{
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&pas_cpufreq_driver);
+}
+
+static void __exit pas_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pas_cpufreq_driver);
+}
+
+module_init(pas_cpufreq_init);
+module_exit(pas_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pcc-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pcc-cpufreq.c
new file mode 100644
index 0000000..0c56c97
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pcc-cpufreq.c
@@ -0,0 +1,623 @@
+/*
+ *  pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface
+ *
+ *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ *	Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ *  INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#define PCC_VERSION	"1.10.00"
+#define POLL_LOOPS 	300
+
+#define CMD_COMPLETE 	0x1
+#define CMD_GET_FREQ 	0x0
+#define CMD_SET_FREQ 	0x1
+
+#define BUF_SZ		4
+
+struct pcc_register_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 access_size;
+	u64 address;
+} __attribute__ ((packed));
+
+struct pcc_memory_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 resource_usage;
+	u8 type_specific;
+	u64 granularity;
+	u64 minimum;
+	u64 maximum;
+	u64 translation_offset;
+	u64 address_length;
+} __attribute__ ((packed));
+
+static struct cpufreq_driver pcc_cpufreq_driver;
+
+struct pcc_header {
+	u32 signature;
+	u16 length;
+	u8 major;
+	u8 minor;
+	u32 features;
+	u16 command;
+	u16 status;
+	u32 latency;
+	u32 minimum_time;
+	u32 maximum_time;
+	u32 nominal;
+	u32 throttled_frequency;
+	u32 minimum_frequency;
+};
+
+static void __iomem *pcch_virt_addr;
+static struct pcc_header __iomem *pcch_hdr;
+
+static DEFINE_SPINLOCK(pcc_lock);
+
+static struct acpi_generic_address doorbell;
+
+static u64 doorbell_preserve;
+static u64 doorbell_write;
+
+static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49,
+			  0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
+
+struct pcc_cpu {
+	u32 input_offset;
+	u32 output_offset;
+};
+
+static struct pcc_cpu __percpu *pcc_cpu_info;
+
+static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static inline void pcc_cmd(void)
+{
+	u64 doorbell_value;
+	int i;
+
+	acpi_read(&doorbell_value, &doorbell);
+	acpi_write((doorbell_value & doorbell_preserve) | doorbell_write,
+		   &doorbell);
+
+	for (i = 0; i < POLL_LOOPS; i++) {
+		if (ioread16(&pcch_hdr->status) & CMD_COMPLETE)
+			break;
+	}
+}
+
+static inline void pcc_clear_mapping(void)
+{
+	if (pcch_virt_addr)
+		iounmap(pcch_virt_addr);
+	pcch_virt_addr = NULL;
+}
+
+static unsigned int pcc_get_freq(unsigned int cpu)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	unsigned int curr_freq;
+	unsigned int freq_limit;
+	u16 status;
+	u32 input_buffer;
+	u32 output_buffer;
+
+	spin_lock(&pcc_lock);
+
+	pr_debug("get: get_freq for CPU %d\n", cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	input_buffer = 0x1;
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_GET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	output_buffer =
+		ioread32(pcch_virt_addr + pcc_cpu_data->output_offset);
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	if (status != CMD_COMPLETE) {
+		pr_debug("get: FAILED: for CPU %d, status is %d\n",
+			cpu, status);
+		goto cmd_incomplete;
+	}
+	iowrite16(0, &pcch_hdr->status);
+	curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
+			/ 100) * 1000);
+
+	pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is "
+		"0x%p, contains a value of: 0x%x. Speed is: %d MHz\n",
+		cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
+		output_buffer, curr_freq);
+
+	freq_limit = (output_buffer >> 8) & 0xff;
+	if (freq_limit != 0xff) {
+		pr_debug("get: frequency for cpu %d is being temporarily"
+			" capped at %d\n", cpu, curr_freq);
+	}
+
+	spin_unlock(&pcc_lock);
+	return curr_freq;
+
+cmd_incomplete:
+	iowrite16(0, &pcch_hdr->status);
+	spin_unlock(&pcc_lock);
+	return 0;
+}
+
+static int pcc_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	struct cpufreq_freqs freqs;
+	u16 status;
+	u32 input_buffer;
+	int cpu;
+
+	cpu = policy->cpu;
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	pr_debug("target: CPU %d should go to target freq: %d "
+		"(virtual) input_offset is 0x%p\n",
+		cpu, target_freq,
+		(pcch_virt_addr + pcc_cpu_data->input_offset));
+
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+	cpufreq_freq_transition_begin(policy, &freqs);
+	spin_lock(&pcc_lock);
+
+	input_buffer = 0x1 | (((target_freq * 100)
+			       / (ioread32(&pcch_hdr->nominal) * 1000)) << 8);
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_SET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	iowrite16(0, &pcch_hdr->status);
+
+	cpufreq_freq_transition_end(policy, &freqs, status != CMD_COMPLETE);
+	spin_unlock(&pcc_lock);
+
+	if (status != CMD_COMPLETE) {
+		pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
+			cpu, status);
+		return -EINVAL;
+	}
+
+	pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
+
+	return 0;
+}
+
+static int pcc_get_offset(int cpu)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *pccp, *offset;
+	struct pcc_cpu *pcc_cpu_data;
+	struct acpi_processor *pr;
+	int ret = 0;
+
+	pr = per_cpu(processors, cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	if (!pr)
+		return -ENODEV;
+
+	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	pccp = buffer.pointer;
+	if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	};
+
+	offset = &(pccp->package.elements[0]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->input_offset = offset->integer.value;
+
+	offset = &(pccp->package.elements[1]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->output_offset = offset->integer.value;
+
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+	memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
+
+	pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data "
+		"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
+		cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
+out_free:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
+{
+	acpi_status status;
+	struct acpi_object_list input;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object in_params[4];
+	union acpi_object *out_obj;
+	u32 capabilities[2];
+	u32 errors;
+	u32 supported;
+	int ret = 0;
+
+	input.count = 4;
+	input.pointer = in_params;
+	in_params[0].type               = ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length      = 16;
+	in_params[0].buffer.pointer     = OSC_UUID;
+	in_params[1].type               = ACPI_TYPE_INTEGER;
+	in_params[1].integer.value      = 1;
+	in_params[2].type               = ACPI_TYPE_INTEGER;
+	in_params[2].integer.value      = 2;
+	in_params[3].type               = ACPI_TYPE_BUFFER;
+	in_params[3].buffer.length      = 8;
+	in_params[3].buffer.pointer     = (u8 *)&capabilities;
+
+	capabilities[0] = OSC_QUERY_ENABLE;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	kfree(output.pointer);
+	capabilities[0] = 0x0;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_probe(void)
+{
+	acpi_status status;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct pcc_memory_resource *mem_resource;
+	struct pcc_register_resource *reg_resource;
+	union acpi_object *out_obj, *member;
+	acpi_handle handle, osc_handle;
+	int ret = 0;
+
+	status = acpi_get_handle(NULL, "\\_SB", &handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!acpi_has_method(handle, "PCCH"))
+		return -ENODEV;
+
+	status = acpi_get_handle(handle, "_OSC", &osc_handle);
+	if (ACPI_SUCCESS(status)) {
+		ret = pcc_cpufreq_do_osc(&osc_handle);
+		if (ret)
+			pr_debug("probe: _OSC evaluation did not succeed\n");
+		/* Firmware's use of _OSC is optional */
+		ret = 0;
+	}
+
+	status = acpi_evaluate_object(handle, "PCCH", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	member = &out_obj->package.elements[0];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
+
+	pr_debug("probe: mem_resource descriptor: 0x%x,"
+		" length: %d, space_id: %d, resource_usage: %d,"
+		" type_specific: %d, granularity: 0x%llx,"
+		" minimum: 0x%llx, maximum: 0x%llx,"
+		" translation_offset: 0x%llx, address_length: 0x%llx\n",
+		mem_resource->descriptor, mem_resource->length,
+		mem_resource->space_id, mem_resource->resource_usage,
+		mem_resource->type_specific, mem_resource->granularity,
+		mem_resource->minimum, mem_resource->maximum,
+		mem_resource->translation_offset,
+		mem_resource->address_length);
+
+	if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
+					mem_resource->address_length);
+	if (pcch_virt_addr == NULL) {
+		pr_debug("probe: could not map shared mem region\n");
+		ret = -ENOMEM;
+		goto out_free;
+	}
+	pcch_hdr = pcch_virt_addr;
+
+	pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+	pr_debug("probe: PCCH header is at physical address: 0x%llx,"
+		" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
+		" supported features: 0x%x, command field: 0x%x,"
+		" status field: 0x%x, nominal latency: %d us\n",
+		mem_resource->minimum, ioread32(&pcch_hdr->signature),
+		ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major),
+		ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features),
+		ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
+		ioread32(&pcch_hdr->latency));
+
+	pr_debug("probe: min time between commands: %d us,"
+		" max time between commands: %d us,"
+		" nominal CPU frequency: %d MHz,"
+		" minimum CPU frequency: %d MHz,"
+		" minimum CPU frequency without throttling: %d MHz\n",
+		ioread32(&pcch_hdr->minimum_time),
+		ioread32(&pcch_hdr->maximum_time),
+		ioread32(&pcch_hdr->nominal),
+		ioread32(&pcch_hdr->throttled_frequency),
+		ioread32(&pcch_hdr->minimum_frequency));
+
+	member = &out_obj->package.elements[1];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	reg_resource = (struct pcc_register_resource *)member->buffer.pointer;
+
+	doorbell.space_id = reg_resource->space_id;
+	doorbell.bit_width = reg_resource->bit_width;
+	doorbell.bit_offset = reg_resource->bit_offset;
+	doorbell.access_width = 4;
+	doorbell.address = reg_resource->address;
+
+	pr_debug("probe: doorbell: space_id is %d, bit_width is %d, "
+		"bit_offset is %d, access_width is %d, address is 0x%llx\n",
+		doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
+		doorbell.access_width, reg_resource->address);
+
+	member = &out_obj->package.elements[2];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_preserve = member->integer.value;
+
+	member = &out_obj->package.elements[3];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_write = member->integer.value;
+
+	pr_debug("probe: doorbell_preserve: 0x%llx,"
+		" doorbell_write: 0x%llx\n",
+		doorbell_preserve, doorbell_write);
+
+	pcc_cpu_info = alloc_percpu(struct pcc_cpu);
+	if (!pcc_cpu_info) {
+		ret = -ENOMEM;
+		goto pcch_free;
+	}
+
+	printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
+	       " limits: %d MHz, %d MHz\n", PCC_VERSION,
+	       ioread32(&pcch_hdr->minimum_frequency),
+	       ioread32(&pcch_hdr->nominal));
+	kfree(output.pointer);
+	return ret;
+pcch_free:
+	pcc_clear_mapping();
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned int result = 0;
+
+	if (!pcch_virt_addr) {
+		result = -1;
+		goto out;
+	}
+
+	result = pcc_get_offset(cpu);
+	if (result) {
+		pr_debug("init: PCCP evaluation failed\n");
+		goto out;
+	}
+
+	policy->max = policy->cpuinfo.max_freq =
+		ioread32(&pcch_hdr->nominal) * 1000;
+	policy->min = policy->cpuinfo.min_freq =
+		ioread32(&pcch_hdr->minimum_frequency) * 1000;
+
+	pr_debug("init: policy->max is %d, policy->min is %d\n",
+		policy->max, policy->min);
+out:
+	return result;
+}
+
+static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver pcc_cpufreq_driver = {
+	.flags = CPUFREQ_CONST_LOOPS,
+	.get = pcc_get_freq,
+	.verify = pcc_cpufreq_verify,
+	.target = pcc_cpufreq_target,
+	.init = pcc_cpufreq_cpu_init,
+	.exit = pcc_cpufreq_cpu_exit,
+	.name = "pcc-cpufreq",
+};
+
+static int __init pcc_cpufreq_init(void)
+{
+	int ret;
+
+	/* Skip initialization if another cpufreq driver is there. */
+	if (cpufreq_get_current_driver())
+		return 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	ret = pcc_cpufreq_probe();
+	if (ret) {
+		pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n");
+		return ret;
+	}
+
+	ret = cpufreq_register_driver(&pcc_cpufreq_driver);
+
+	return ret;
+}
+
+static void __exit pcc_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pcc_cpufreq_driver);
+
+	pcc_clear_mapping();
+
+	free_percpu(pcc_cpu_info);
+}
+
+static const struct acpi_device_id processor_device_ids[] = {
+	{ACPI_PROCESSOR_OBJECT_HID, },
+	{ACPI_PROCESSOR_DEVICE_HID, },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
+MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
+MODULE_VERSION(PCC_VERSION);
+MODULE_DESCRIPTION("Processor Clocking Control interface driver");
+MODULE_LICENSE("GPL");
+
+late_initcall(pcc_cpufreq_init);
+module_exit(pcc_cpufreq_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pmac32-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pmac32-cpufreq.c
new file mode 100644
index 0000000..e225edb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pmac32-cpufreq.c
@@ -0,0 +1,693 @@
+/*
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
+#include <linux/of_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+#include <asm/switch_to.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+static unsigned long transition_latency;
+
+/*
+ * Different models uses different mechanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+	{0, CPUFREQ_HIGH,	0},
+	{0, CPUFREQ_LOW,	0},
+	{0, 0,			CPUFREQ_TABLE_END},
+};
+
+static inline void local_delay(unsigned long ms)
+{
+	if (no_schedule)
+		mdelay(ms);
+	else
+		msleep(ms);
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+	/* This will cause a recalc of bogomips and display the
+	 * result. We backup/restore the value to avoid affecting the
+	 * core cpufreq framework's own calculation.
+	 */
+	unsigned long save_lpj = loops_per_jiffy;
+	calibrate_delay();
+	loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+	u32 hid2;
+
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(10);
+
+		/* tweak L2 for high voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 &= ~0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+	}
+#ifdef CONFIG_6xx
+	low_choose_750fx_pll(low_speed);
+#endif
+	if (low_speed == 1) {
+		/* tweak L2 for low voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 |= 0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(10);
+	}
+
+	return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_PS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(1);
+	}
+
+	/* set frequency */
+#ifdef CONFIG_6xx
+	low_choose_7447a_dfs(low_speed);
+#endif
+	udelay(100);
+
+	if (low_speed == 1) {
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(1);
+	}
+
+	return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_DFS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+	int gpio, timeout = 0;
+
+	/* If ramping up, set voltage first */
+	if (low_speed == 0) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+	/* Set frequency */
+	gpio = 	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+	if (low_speed == ((gpio & 0x01) == 0))
+		goto skip;
+
+	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+			  low_speed ? 0x04 : 0x05);
+	udelay(200);
+	do {
+		if (++timeout > 100)
+			break;
+		local_delay(1);
+		gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+	} while((gpio & 0x02) == 0);
+ skip:
+	/* If ramping down, set voltage last */
+	if (low_speed == 1) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+	struct adb_request req;
+	unsigned long save_l2cr;
+	unsigned long save_l3cr;
+	unsigned int pic_prio;
+	unsigned long flags;
+
+	preempt_disable();
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+	pmu_suspend();
+
+	/* Disable all interrupt sources on openpic */
+ 	pic_prio = mpic_cpu_get_priority();
+	mpic_cpu_set_priority(0xf);
+
+	/* Make sure the decrementer won't interrupt us */
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	/* Make sure any pending DEC interrupt occurring while we did
+	 * the above didn't re-enable the DEC */
+	mb();
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+	/* We can now disable MSR_EE */
+	local_irq_save(flags);
+
+	/* Giveup the FPU & vec */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	/* Save & disable L2 and L3 caches */
+	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
+	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
+
+	/* Send the new speed command. My assumption is that this command
+	 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+	 */
+	pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+	while (!req.complete)
+		pmu_poll();
+
+	/* Prepare the northbridge for the speed transition */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+	/* Call low level code to backup CPU state and recover from
+	 * hardware reset
+	 */
+	low_sleep_handler();
+
+	/* Restore the northbridge */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+	/* Restore L2 cache */
+	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ 		_set_L2CR(save_l2cr);
+	/* Restore L3 cache */
+	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ 		_set_L3CR(save_l3cr);
+
+	/* Restore userland MMU context */
+	switch_mmu_context(NULL, current->active_mm, NULL);
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+	/* Restore low level PMU operations */
+	pmu_unlock();
+
+	/*
+	 * Restore decrementer; we'll take a decrementer interrupt
+	 * as soon as interrupts are re-enabled and the generic
+	 * clockevents code will reprogram it with the right value.
+	 */
+	set_dec(1);
+
+	/* Restore interrupts */
+ 	mpic_cpu_set_priority(pic_prio);
+
+	/* Let interrupts flow again ... */
+	local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	pmu_resume();
+
+	preempt_enable();
+
+	return 0;
+}
+
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
+{
+	unsigned long l3cr;
+	static unsigned long prev_l3cr;
+
+	if (speed_mode == CPUFREQ_LOW &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if (l3cr & L3CR_L3E) {
+			prev_l3cr = l3cr;
+			_set_L3CR(0);
+		}
+	}
+	set_speed_proc(speed_mode == CPUFREQ_LOW);
+	if (speed_mode == CPUFREQ_HIGH &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+			_set_L3CR(prev_l3cr);
+	}
+	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+	return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+	return cur_freq;
+}
+
+static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
+					unsigned int index)
+{
+	int		rc;
+
+	rc = do_set_cpu_speed(policy, index);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+	return rc;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+	const u32 *reg = of_get_property(np, "reg", NULL);
+	u32 offset;
+
+	if (reg == NULL)
+		return 0;
+	/* That works for all keylargos but shall be fixed properly
+	 * some day... The problem is that it seems we can't rely
+	 * on the "reg" property of the GPIO nodes, they are either
+	 * relative to the base of KeyLargo or to the base of the
+	 * GPIO space, and the device-tree doesn't help.
+	 */
+	offset = *reg;
+	if (offset < KEYLARGO_GPIO_LEVELS0)
+		offset += KEYLARGO_GPIO_LEVELS0;
+	return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	/* Ok, this could be made a bit smarter, but let's be robust for now. We
+	 * always force a speed change to high speed before sleep, to make sure
+	 * we have appropriate voltage and/or bus speed for the wakeup process,
+	 * and to make sure our loops_per_jiffies are "good enough", that is will
+	 * not cause too short delays if we sleep in low speed and wake in high
+	 * speed..
+	 */
+	no_schedule = 1;
+	sleep_freq = cur_freq;
+	if (cur_freq == low_freq && !is_pmu_based)
+		do_set_cpu_speed(policy, CPUFREQ_HIGH);
+	return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	/* If we resume, first check if we have a get() function */
+	if (get_speed_proc)
+		cur_freq = get_speed_proc();
+	else
+		cur_freq = 0;
+
+	/* We don't, hrm... we don't really know our speed here, best
+	 * is that we force a switch to whatever it was, which is
+	 * probably high speed due to our suspend() routine
+	 */
+	do_set_cpu_speed(policy, sleep_freq == low_freq ?
+			 CPUFREQ_LOW : CPUFREQ_HIGH);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	no_schedule = 0;
+	return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+	.verify 	= cpufreq_generic_frequency_table_verify,
+	.target_index	= pmac_cpufreq_target,
+	.get		= pmac_cpufreq_get_speed,
+	.init		= pmac_cpufreq_cpu_init,
+	.suspend	= pmac_cpufreq_suspend,
+	.resume		= pmac_cpufreq_resume,
+	.flags		= CPUFREQ_PM_NO_WARN |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.attr		= cpufreq_generic_attr,
+	.name		= "powermac",
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+								"voltage-gpio");
+	struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+								"frequency-gpio");
+	struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+								     "slewing-done");
+	const u32 *value;
+
+	/*
+	 * Check to see if it's GPIO driven or PMU only
+	 *
+	 * The way we extract the GPIO address is slightly hackish, but it
+	 * works well enough for now. We need to abstract the whole GPIO
+	 * stuff sooner or later anyway
+	 */
+
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	if (freq_gpio_np)
+		frequency_gpio = read_gpio(freq_gpio_np);
+	if (slew_done_gpio_np)
+		slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+	/* If we use the frequency GPIOs, calculate the min/max speeds based
+	 * on the bus frequencies
+	 */
+	if (frequency_gpio && slew_done_gpio) {
+		int lenp, rc;
+		const u32 *freqs, *ratio;
+
+		freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
+		lenp /= sizeof(u32);
+		if (freqs == NULL || lenp != 2) {
+			pr_err("bus-frequencies incorrect or missing\n");
+			return 1;
+		}
+		ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+						NULL);
+		if (ratio == NULL) {
+			pr_err("processor-to-bus-ratio*2 missing\n");
+			return 1;
+		}
+
+		/* Get the min/max bus frequencies */
+		low_freq = min(freqs[0], freqs[1]);
+		hi_freq = max(freqs[0], freqs[1]);
+
+		/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+		 * frequency, it claims it to be around 84Mhz on some models while
+		 * it appears to be approx. 101Mhz on all. Let's hack around here...
+		 * fortunately, we don't need to be too precise
+		 */
+		if (low_freq < 98000000)
+			low_freq = 101000000;
+
+		/* Convert those to CPU core clocks */
+		low_freq = (low_freq * (*ratio)) / 2000;
+		hi_freq = (hi_freq * (*ratio)) / 2000;
+
+		/* Now we get the frequencies, we read the GPIO to see what is out current
+		 * speed
+		 */
+		rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+		cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+		set_speed_proc = gpios_set_cpu_speed;
+		return 1;
+	}
+
+	/* If we use the PMU, look for the min & max frequencies in the
+	 * device-tree
+	 */
+	value = of_get_property(cpunode, "min-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+	/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+	 * here */
+	if (low_freq < 100000)
+		low_freq *= 10;
+
+	value = of_get_property(cpunode, "max-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	hi_freq = (*value) / 1000;
+	set_speed_proc = pmu_set_cpu_speed;
+	is_pmu_based = 1;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	of_node_put(volt_gpio_np);
+	if (!voltage_gpio){
+		pr_err("missing cpu-vcore-select gpio\n");
+		return 1;
+	}
+
+	/* OF only reports the high frequency */
+	hi_freq = cur_freq;
+	low_freq = cur_freq/2;
+
+	/* Read actual frequency from CPU */
+	cur_freq = dfs_get_cpu_speed();
+	set_speed_proc = dfs_set_cpu_speed;
+	get_speed_proc = dfs_get_cpu_speed;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+	u32 pvr;
+	const u32 *value;
+
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	hi_freq = cur_freq;
+	value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+
+	of_node_put(volt_gpio_np);
+	pvr = mfspr(SPRN_PVR);
+	has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+	set_speed_proc = cpu_750fx_cpu_speed;
+	get_speed_proc = cpu_750fx_get_cpu_speed;
+	cur_freq = cpu_750fx_get_cpu_speed();
+
+	return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ *  - Recent MacRISC3 laptops
+ *  - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+	struct device_node	*cpunode;
+	const u32		*value;
+
+	if (strstr(boot_command_line, "nocpufreq"))
+		return 0;
+
+	/* Get first CPU node */
+	cpunode = of_cpu_device_node_get(0);
+	if (!cpunode)
+		goto out;
+
+	/* Get current cpu clock freq */
+	value = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!value)
+		goto out;
+	cur_freq = (*value) / 1000;
+
+	/*  Check for 7447A based MacRISC3 */
+	if (of_machine_is_compatible("MacRISC3") &&
+	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
+	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+		pmac_cpufreq_init_7447A(cpunode);
+
+		/* Allow dynamic switching */
+		transition_latency = 8000000;
+		pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING;
+	/* Check for other MacRISC3 machines */
+	} else if (of_machine_is_compatible("PowerBook3,4") ||
+		   of_machine_is_compatible("PowerBook3,5") ||
+		   of_machine_is_compatible("MacRISC3")) {
+		pmac_cpufreq_init_MacRISC3(cpunode);
+	/* Else check for iBook2 500/600 */
+	} else if (of_machine_is_compatible("PowerBook4,1")) {
+		hi_freq = cur_freq;
+		low_freq = 400000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 550 */
+	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+		hi_freq = cur_freq;
+		low_freq = 500000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 400 & 500 */
+	else if (of_machine_is_compatible("PowerBook3,2")) {
+		/* We only know about the 400 MHz and the 500Mhz model
+		 * they both have 300 MHz as low frequency
+		 */
+		if (cur_freq < 350000 || cur_freq > 550000)
+			goto out;
+		hi_freq = cur_freq;
+		low_freq = 300000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for 750FX */
+	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+		pmac_cpufreq_init_750FX(cpunode);
+out:
+	of_node_put(cpunode);
+	if (set_speed_proc == NULL)
+		return -ENODEV;
+
+	pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+	pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	pr_info("Registering PowerMac CPU frequency driver\n");
+	pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+		low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+	return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c
new file mode 100644
index 0000000..be623dd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pmac64-cpufreq.c
@@ -0,0 +1,675 @@
+/*
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#undef DEBUG
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
+
+#define DBG(fmt...) pr_debug(fmt)
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001			/* PCR scom addr */
+
+#define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
+#define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
+#define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
+#define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
+#define PCR_SPEED_SHIFT		17
+#define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
+#define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
+#define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
+#define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
+#define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
+
+#define SCOM_PSR 0x408001			/* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
+#define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
+#define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
+#define PSR_CUR_SPEED_SHIFT	(56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+	{0, CPUFREQ_HIGH,	0},
+	{0, CPUFREQ_LOW,	0},
+	{0, 0,			CPUFREQ_TABLE_END},
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retrieved from the device-tree
+ */
+static int g5_pmode_cur;
+
+static void (*g5_switch_volt)(int speed_mode);
+static int (*g5_switch_freq)(int speed_mode);
+static int (*g5_query_freq)(void);
+
+static unsigned long transition_latency;
+
+#ifdef CONFIG_PMAC_SMU
+
+static const u32 *g5_pmode_data;
+static int g5_pmode_max;
+
+static struct smu_sdbp_fvt *g5_fvt_table;	/* table of op. points */
+static int g5_fvt_count;			/* number of op. points */
+static int g5_fvt_cur;				/* current op. point */
+
+/*
+ * SMU based voltage switching for Neo2 platforms
+ */
+
+static void g5_smu_switch_volt(int speed_mode)
+{
+	struct smu_simple_cmd	cmd;
+
+	DECLARE_COMPLETION_ONSTACK(comp);
+	smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+			 &comp, 'V', 'S', 'L', 'E', 'W',
+			 0xff, g5_fvt_cur+1, speed_mode);
+	wait_for_completion(&comp);
+}
+
+/*
+ * Platform function based voltage/vdnap switching for Neo2
+ */
+
+static struct pmf_function *pfunc_set_vdnap0;
+static struct pmf_function *pfunc_vdnap0_complete;
+
+static void g5_vdnap_switch_volt(int speed_mode)
+{
+	struct pmf_args args;
+	u32 slew, done = 0;
+	unsigned long timeout;
+
+	slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
+	args.count = 1;
+	args.u[0].p = &slew;
+
+	pmf_call_one(pfunc_set_vdnap0, &args);
+
+	/* It's an irq GPIO so we should be able to just block here,
+	 * I'll do that later after I've properly tested the IRQ code for
+	 * platform functions
+	 */
+	timeout = jiffies + HZ/10;
+	while(!time_after(jiffies, timeout)) {
+		args.count = 1;
+		args.u[0].p = &done;
+		pmf_call_one(pfunc_vdnap0_complete, &args);
+		if (done)
+			break;
+		usleep_range(1000, 1000);
+	}
+	if (done == 0)
+		pr_warn("Timeout in clock slewing !\n");
+}
+
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int g5_scom_switch_freq(int speed_mode)
+{
+	unsigned long flags;
+	int to;
+
+	/* If frequency is going up, first ramp up the voltage */
+	if (speed_mode < g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	local_irq_save(flags);
+
+	/* Clear PCR high */
+	scom970_write(SCOM_PCR, 0);
+	/* Clear PCR low */
+       	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+	/* Set PCR low */
+	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+		      g5_pmode_data[speed_mode]);
+
+	/* Wait for completion */
+	for (to = 0; to < 10; to++) {
+		unsigned long psr = scom970_read(SCOM_PSR);
+
+		if ((psr & PSR_CMD_RECEIVED) == 0 &&
+		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+		    == 0)
+			break;
+		if (psr & PSR_CMD_COMPLETED)
+			break;
+		udelay(100);
+	}
+
+	local_irq_restore(flags);
+
+	/* If frequency is going down, last ramp the voltage */
+	if (speed_mode > g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	g5_pmode_cur = speed_mode;
+	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	return 0;
+}
+
+static int g5_scom_query_freq(void)
+{
+	unsigned long psr = scom970_read(SCOM_PSR);
+	int i;
+
+	for (i = 0; i <= g5_pmode_max; i++)
+		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+			break;
+	return i;
+}
+
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ * Platform function based voltage switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu0_volt_high;
+static struct pmf_function *pfunc_cpu0_volt_low;
+static struct pmf_function *pfunc_cpu1_volt_high;
+static struct pmf_function *pfunc_cpu1_volt_low;
+
+static void g5_pfunc_switch_volt(int speed_mode)
+{
+	if (speed_mode == CPUFREQ_HIGH) {
+		if (pfunc_cpu0_volt_high)
+			pmf_call_one(pfunc_cpu0_volt_high, NULL);
+		if (pfunc_cpu1_volt_high)
+			pmf_call_one(pfunc_cpu1_volt_high, NULL);
+	} else {
+		if (pfunc_cpu0_volt_low)
+			pmf_call_one(pfunc_cpu0_volt_low, NULL);
+		if (pfunc_cpu1_volt_low)
+			pmf_call_one(pfunc_cpu1_volt_low, NULL);
+	}
+	usleep_range(10000, 10000); /* should be faster , to fix */
+}
+
+/*
+ * Platform function based frequency switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu_setfreq_high;
+static struct pmf_function *pfunc_cpu_setfreq_low;
+static struct pmf_function *pfunc_cpu_getfreq;
+static struct pmf_function *pfunc_slewing_done;
+
+static int g5_pfunc_switch_freq(int speed_mode)
+{
+	struct pmf_args args;
+	u32 done = 0;
+	unsigned long timeout;
+	int rc;
+
+	DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
+
+	/* If frequency is going up, first ramp up the voltage */
+	if (speed_mode < g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	/* Do it */
+	if (speed_mode == CPUFREQ_HIGH)
+		rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+	else
+		rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+	if (rc)
+		pr_warn("pfunc switch error %d\n", rc);
+
+	/* It's an irq GPIO so we should be able to just block here,
+	 * I'll do that later after I've properly tested the IRQ code for
+	 * platform functions
+	 */
+	timeout = jiffies + HZ/10;
+	while(!time_after(jiffies, timeout)) {
+		args.count = 1;
+		args.u[0].p = &done;
+		pmf_call_one(pfunc_slewing_done, &args);
+		if (done)
+			break;
+		usleep_range(500, 500);
+	}
+	if (done == 0)
+		pr_warn("Timeout in clock slewing !\n");
+
+	/* If frequency is going down, last ramp the voltage */
+	if (speed_mode > g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	g5_pmode_cur = speed_mode;
+	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	return 0;
+}
+
+static int g5_pfunc_query_freq(void)
+{
+	struct pmf_args args;
+	u32 val = 0;
+
+	args.count = 1;
+	args.u[0].p = &val;
+	pmf_call_one(pfunc_cpu_getfreq, &args);
+	return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
+}
+
+
+/*
+ * Common interface to the cpufreq core
+ */
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	return g5_switch_freq(index);
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+	return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency);
+}
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+	.name		= "powermac",
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= g5_cpufreq_cpu_init,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= g5_cpufreq_target,
+	.get		= g5_cpufreq_get_speed,
+	.attr 		= cpufreq_generic_attr,
+};
+
+
+#ifdef CONFIG_PMAC_SMU
+
+static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
+{
+	unsigned int psize, ssize;
+	unsigned long max_freq;
+	char *freq_method, *volt_method;
+	const u32 *valp;
+	u32 pvr_hi;
+	int use_volts_vdnap = 0;
+	int use_volts_smu = 0;
+	int rc = -ENODEV;
+
+	/* Check supported platforms */
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2") ||
+	    of_machine_is_compatible("PowerMac9,1") ||
+	    of_machine_is_compatible("PowerMac12,1"))
+		use_volts_smu = 1;
+	else if (of_machine_is_compatible("PowerMac11,2"))
+		use_volts_vdnap = 1;
+	else
+		return -ENODEV;
+
+	/* Check 970FX for now */
+	valp = of_get_property(cpunode, "cpu-version", NULL);
+	if (!valp) {
+		DBG("No cpu-version property !\n");
+		goto bail_noprops;
+	}
+	pvr_hi = (*valp) >> 16;
+	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+		pr_err("Unsupported CPU version\n");
+		goto bail_noprops;
+	}
+
+	/* Look for the powertune data in the device-tree */
+	g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
+	if (!g5_pmode_data) {
+		DBG("No power-mode-data !\n");
+		goto bail_noprops;
+	}
+	g5_pmode_max = psize / sizeof(u32) - 1;
+
+	if (use_volts_smu) {
+		const struct smu_sdbp_header *shdr;
+
+		/* Look for the FVT table */
+		shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+		if (!shdr)
+			goto bail_noprops;
+		g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+		ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr);
+		g5_fvt_count = ssize / sizeof(*g5_fvt_table);
+		g5_fvt_cur = 0;
+
+		/* Sanity checking */
+		if (g5_fvt_count < 1 || g5_pmode_max < 1)
+			goto bail_noprops;
+
+		g5_switch_volt = g5_smu_switch_volt;
+		volt_method = "SMU";
+	} else if (use_volts_vdnap) {
+		struct device_node *root;
+
+		root = of_find_node_by_path("/");
+		if (root == NULL) {
+			pr_err("Can't find root of device tree\n");
+			goto bail_noprops;
+		}
+		pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
+		pfunc_vdnap0_complete =
+			pmf_find_function(root, "slewing-done");
+		if (pfunc_set_vdnap0 == NULL ||
+		    pfunc_vdnap0_complete == NULL) {
+			pr_err("Can't find required platform function\n");
+			goto bail_noprops;
+		}
+
+		g5_switch_volt = g5_vdnap_switch_volt;
+		volt_method = "GPIO";
+	} else {
+		g5_switch_volt = g5_dummy_switch_volt;
+		volt_method = "none";
+	}
+
+	/*
+	 * From what I see, clock-frequency is always the maximal frequency.
+	 * The current driver can not slew sysclk yet, so we really only deal
+	 * with powertune steps for now. We also only implement full freq and
+	 * half freq in this version. So far, I haven't yet seen a machine
+	 * supporting anything else.
+	 */
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!valp)
+		return -ENODEV;
+	max_freq = (*valp)/1000;
+	g5_cpu_freqs[0].frequency = max_freq;
+	g5_cpu_freqs[1].frequency = max_freq/2;
+
+	/* Set callbacks */
+	transition_latency = 12000;
+	g5_switch_freq = g5_scom_switch_freq;
+	g5_query_freq = g5_scom_query_freq;
+	freq_method = "SCOM";
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	g5_switch_volt(CPUFREQ_HIGH);
+	msleep(10);
+	g5_pmode_cur = -1;
+	g5_switch_freq(g5_query_freq());
+
+	pr_info("Registering G5 CPU frequency driver\n");
+	pr_info("Frequency method: %s, Voltage method: %s\n",
+		freq_method, volt_method);
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		g5_cpu_freqs[1].frequency/1000,
+		g5_cpu_freqs[0].frequency/1000,
+		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+	/* We keep the CPU node on hold... hopefully, Apple G5 don't have
+	 * hotplug CPU with a dynamic device-tree ...
+	 */
+	return rc;
+
+ bail_noprops:
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+
+static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
+{
+	struct device_node *cpuid = NULL, *hwclock = NULL;
+	const u8 *eeprom = NULL;
+	const u32 *valp;
+	u64 max_freq, min_freq, ih, il;
+	int has_volt = 1, rc = 0;
+
+	DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+	    " RackMac3,1...\n");
+
+	/* Lookup the cpuid eeprom node */
+        cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
+	if (cpuid != NULL)
+		eeprom = of_get_property(cpuid, "cpuid", NULL);
+	if (eeprom == NULL) {
+		pr_err("Can't find cpuid EEPROM !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	/* Lookup the i2c hwclock */
+	for_each_node_by_name(hwclock, "i2c-hwclock") {
+		const char *loc = of_get_property(hwclock,
+				"hwctrl-location", NULL);
+		if (loc == NULL)
+			continue;
+		if (strcmp(loc, "CPU CLOCK"))
+			continue;
+		if (!of_get_property(hwclock, "platform-get-frequency", NULL))
+			continue;
+		break;
+	}
+	if (hwclock == NULL) {
+		pr_err("Can't find i2c clock chip !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock);
+
+	/* Now get all the platform functions */
+	pfunc_cpu_getfreq =
+		pmf_find_function(hwclock, "get-frequency");
+	pfunc_cpu_setfreq_high =
+		pmf_find_function(hwclock, "set-frequency-high");
+	pfunc_cpu_setfreq_low =
+		pmf_find_function(hwclock, "set-frequency-low");
+	pfunc_slewing_done =
+		pmf_find_function(hwclock, "slewing-done");
+	pfunc_cpu0_volt_high =
+		pmf_find_function(hwclock, "set-voltage-high-0");
+	pfunc_cpu0_volt_low =
+		pmf_find_function(hwclock, "set-voltage-low-0");
+	pfunc_cpu1_volt_high =
+		pmf_find_function(hwclock, "set-voltage-high-1");
+	pfunc_cpu1_volt_low =
+		pmf_find_function(hwclock, "set-voltage-low-1");
+
+	/* Check we have minimum requirements */
+	if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
+	    pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
+		pr_err("Can't find platform functions !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	/* Check that we have complete sets */
+	if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
+		pmf_put_function(pfunc_cpu0_volt_high);
+		pmf_put_function(pfunc_cpu0_volt_low);
+		pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
+		has_volt = 0;
+	}
+	if (!has_volt ||
+	    pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
+		pmf_put_function(pfunc_cpu1_volt_high);
+		pmf_put_function(pfunc_cpu1_volt_low);
+		pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
+	}
+
+	/* Note: The device tree also contains a "platform-set-values"
+	 * function for which I haven't quite figured out the usage. It
+	 * might have to be called on init and/or wakeup, I'm not too sure
+	 * but things seem to work fine without it so far ...
+	 */
+
+	/* Get max frequency from device-tree */
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!valp) {
+		pr_err("Can't find CPU frequency !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	max_freq = (*valp)/1000;
+
+	/* Now calculate reduced frequency by using the cpuid input freq
+	 * ratio. This requires 64 bits math unless we are willing to lose
+	 * some precision
+	 */
+	ih = *((u32 *)(eeprom + 0x10));
+	il = *((u32 *)(eeprom + 0x20));
+
+	/* Check for machines with no useful settings */
+	if (il == ih) {
+		pr_warn("No low frequency mode available on this model !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	min_freq = 0;
+	if (ih != 0 && il != 0)
+		min_freq = (max_freq * il) / ih;
+
+	/* Sanity check */
+	if (min_freq >= max_freq || min_freq < 1000) {
+		pr_err("Can't calculate low frequency !\n");
+		rc = -ENXIO;
+		goto bail;
+	}
+	g5_cpu_freqs[0].frequency = max_freq;
+	g5_cpu_freqs[1].frequency = min_freq;
+
+	/* Based on a measurement on Xserve G5, rounded up. */
+	transition_latency = 10 * NSEC_PER_MSEC;
+
+	/* Set callbacks */
+	g5_switch_volt = g5_pfunc_switch_volt;
+	g5_switch_freq = g5_pfunc_switch_freq;
+	g5_query_freq = g5_pfunc_query_freq;
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	g5_switch_volt(CPUFREQ_HIGH);
+	msleep(10);
+	g5_pmode_cur = -1;
+	g5_switch_freq(g5_query_freq());
+
+	pr_info("Registering G5 CPU frequency driver\n");
+	pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
+		has_volt ? "i2c/pfunc" : "none");
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		g5_cpu_freqs[1].frequency/1000,
+		g5_cpu_freqs[0].frequency/1000,
+		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&g5_cpufreq_driver);
+ bail:
+	if (rc != 0) {
+		pmf_put_function(pfunc_cpu_getfreq);
+		pmf_put_function(pfunc_cpu_setfreq_high);
+		pmf_put_function(pfunc_cpu_setfreq_low);
+		pmf_put_function(pfunc_slewing_done);
+		pmf_put_function(pfunc_cpu0_volt_high);
+		pmf_put_function(pfunc_cpu0_volt_low);
+		pmf_put_function(pfunc_cpu1_volt_high);
+		pmf_put_function(pfunc_cpu1_volt_low);
+	}
+	of_node_put(hwclock);
+	of_node_put(cpuid);
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+static int __init g5_cpufreq_init(void)
+{
+	struct device_node *cpunode;
+	int rc = 0;
+
+	/* Get first CPU node */
+	cpunode = of_cpu_device_node_get(0);
+	if (cpunode == NULL) {
+		pr_err("Can't find any CPU node\n");
+		return -ENODEV;
+	}
+
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
+		rc = g5_pm72_cpufreq_init(cpunode);
+#ifdef CONFIG_PMAC_SMU
+	else
+		rc = g5_neo2_cpufreq_init(cpunode);
+#endif /* CONFIG_PMAC_SMU */
+
+	return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k6.c b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k6.c
new file mode 100644
index 0000000..dedd256
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k6.c
@@ -0,0 +1,311 @@
+/*
+ *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä,
+ *                 Dominik Brodowski.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+
+#define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
+					   as it is unused */
+
+static unsigned int                     busfreq;   /* FSB, in 10 kHz */
+static unsigned int                     max_multiplier;
+
+static unsigned int			param_busfreq = 0;
+static unsigned int			param_max_multiplier = 0;
+
+module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO);
+MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)");
+
+module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static struct cpufreq_frequency_table clock_ratio[] = {
+	{0, 60,  /* 110 -> 6.0x */ 0},
+	{0, 55,  /* 011 -> 5.5x */ 0},
+	{0, 50,  /* 001 -> 5.0x */ 0},
+	{0, 45,  /* 000 -> 4.5x */ 0},
+	{0, 40,  /* 010 -> 4.0x */ 0},
+	{0, 35,  /* 111 -> 3.5x */ 0},
+	{0, 30,  /* 101 -> 3.0x */ 0},
+	{0, 20,  /* 100 -> 2.0x */ 0},
+	{0, 0, CPUFREQ_TABLE_END}
+};
+
+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
+static const struct {
+	unsigned freq;
+	unsigned mult;
+} usual_frequency_table[] = {
+	{ 350000, 35 },	// 100   * 3.5
+	{ 400000, 40 },	// 100   * 4
+	{ 450000, 45 }, // 100   * 4.5
+	{ 475000, 50 }, //  95   * 5
+	{ 500000, 50 }, // 100   * 5
+	{ 506250, 45 }, // 112.5 * 4.5
+	{ 533500, 55 }, //  97   * 5.5
+	{ 550000, 55 }, // 100   * 5.5
+	{ 562500, 50 }, // 112.5 * 5
+	{ 570000, 60 }, //  95   * 6
+	{ 600000, 60 }, // 100   * 6
+	{ 618750, 55 }, // 112.5 * 5.5
+	{ 660000, 55 }, // 120   * 5.5
+	{ 675000, 60 }, // 112.5 * 6
+	{ 720000, 60 }, // 120   * 6
+};
+
+#define FREQ_RANGE		3000
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ * Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+	unsigned long invalue = 0;
+	u32 msrval;
+
+	local_irq_disable();
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue = inl(POWERNOW_IOPORT + 0x8);
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	local_irq_enable();
+
+	return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
+}
+
+static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
+{
+	unsigned long outvalue, invalue;
+	unsigned long msrval;
+	unsigned long cr0;
+
+	/* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+	/*
+	 * The processor doesn't respond to inquiry cycles while changing the
+	 * frequency, so we must disable cache.
+	 */
+	local_irq_disable();
+	cr0 = read_cr0();
+	write_cr0(cr0 | X86_CR0_CD);
+	wbinvd();
+
+	outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue = inl(POWERNOW_IOPORT + 0x8);
+	invalue = invalue & 0x1f;
+	outvalue = outvalue | invalue;
+	outl(outvalue, (POWERNOW_IOPORT + 0x8));
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	write_cr0(cr0);
+	local_irq_enable();
+}
+
+/**
+ * powernow_k6_target - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ *   Tries to change the PowerNow! multiplier
+ */
+static int powernow_k6_target(struct cpufreq_policy *policy,
+		unsigned int best_i)
+{
+
+	if (clock_ratio[best_i].driver_data > max_multiplier) {
+		pr_err("invalid target frequency\n");
+		return -EINVAL;
+	}
+
+	powernow_k6_set_cpu_multiplier(best_i);
+
+	return 0;
+}
+
+static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pos;
+	unsigned int i, f;
+	unsigned khz;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	max_multiplier = 0;
+	khz = cpu_khz;
+	for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) {
+		if (khz >= usual_frequency_table[i].freq - FREQ_RANGE &&
+		    khz <= usual_frequency_table[i].freq + FREQ_RANGE) {
+			khz = usual_frequency_table[i].freq;
+			max_multiplier = usual_frequency_table[i].mult;
+			break;
+		}
+	}
+	if (param_max_multiplier) {
+		cpufreq_for_each_entry(pos, clock_ratio)
+			if (pos->driver_data == param_max_multiplier) {
+				max_multiplier = param_max_multiplier;
+				goto have_max_multiplier;
+			}
+		pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+		return -EINVAL;
+	}
+
+	if (!max_multiplier) {
+		pr_warn("unknown frequency %u, cannot determine current multiplier\n",
+			khz);
+		pr_warn("use module parameters max_multiplier and bus_frequency\n");
+		return -EOPNOTSUPP;
+	}
+
+have_max_multiplier:
+	param_max_multiplier = max_multiplier;
+
+	if (param_busfreq) {
+		if (param_busfreq >= 50000 && param_busfreq <= 150000) {
+			busfreq = param_busfreq / 10;
+			goto have_busfreq;
+		}
+		pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+		return -EINVAL;
+	}
+
+	busfreq = khz / max_multiplier;
+have_busfreq:
+	param_busfreq = busfreq * 10;
+
+	/* table init */
+	cpufreq_for_each_entry(pos, clock_ratio) {
+		f = pos->driver_data;
+		if (f > max_multiplier)
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			pos->frequency = busfreq * f;
+	}
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = 500000;
+
+	return cpufreq_table_validate_and_show(policy, clock_ratio);
+}
+
+
+static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+
+	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if (clock_ratio[i].driver_data == max_multiplier) {
+			struct cpufreq_freqs freqs;
+
+			freqs.old = policy->cur;
+			freqs.new = clock_ratio[i].frequency;
+			freqs.flags = 0;
+
+			cpufreq_freq_transition_begin(policy, &freqs);
+			powernow_k6_target(policy, i);
+			cpufreq_freq_transition_end(policy, &freqs, 0);
+			break;
+		}
+	}
+	return 0;
+}
+
+static unsigned int powernow_k6_get(unsigned int cpu)
+{
+	unsigned int ret;
+	ret = (busfreq * powernow_k6_get_cpu_multiplier());
+	return ret;
+}
+
+static struct cpufreq_driver powernow_k6_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= powernow_k6_target,
+	.init		= powernow_k6_cpu_init,
+	.exit		= powernow_k6_cpu_exit,
+	.get		= powernow_k6_get,
+	.name		= "powernow-k6",
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id powernow_k6_ids[] = {
+	{ X86_VENDOR_AMD, 5, 12 },
+	{ X86_VENDOR_AMD, 5, 13 },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k6_ids);
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ *   Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{
+	if (!x86_match_cpu(powernow_k6_ids))
+		return -ENODEV;
+
+	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+		pr_info("PowerNow IOPORT region already used\n");
+		return -EIO;
+	}
+
+	if (cpufreq_register_driver(&powernow_k6_driver)) {
+		release_region(POWERNOW_IOPORT, 16);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ *   Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+	cpufreq_unregister_driver(&powernow_k6_driver);
+	release_region(POWERNOW_IOPORT, 16);
+}
+
+
+MODULE_AUTHOR("Arjan van de Ven, Dave Jones, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE("GPL");
+
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.c b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.c
new file mode 100644
index 0000000..302e9ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.c
@@ -0,0 +1,695 @@
+/*
+ *  AMD K7 Powernow driver.
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Errata 5:
+ *  CPU may fail to execute a FID/VID change in presence of interrupt.
+ *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15:
+ *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
+ *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
+#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include "powernow-k7.h"
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags;
+	u16 settlingtime;
+	u8 reserved1;
+	u8 numpst;
+};
+
+struct pst_s {
+	u32 cpuid;
+	u8 fsbspeed;
+	u8 maxfid;
+	u8 startvid;
+	u8 numpstates;
+};
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+union powernow_acpi_control_t {
+	struct {
+		unsigned long fid:5,
+			vid:5,
+			sgtc:20,
+			res1:2;
+	} bits;
+	unsigned long val;
+};
+#endif
+
+/* divide by 1000 to get VCore voltage in V. */
+static const int mobile_vid_table[32] = {
+    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+    1075, 1050, 1025, 1000, 975, 950, 925, 0,
+};
+
+/* divide by 10 to get FID. */
+static const int fid_codes[32] = {
+    110, 115, 120, 125, 50, 55, 60, 65,
+    70, 75, 80, 85, 90, 95, 100, 105,
+    30, 190, 40, 200, 130, 135, 140, 210,
+    150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+/* This parameter is used in order to force ACPI instead of legacy method for
+ * configuration purpose.
+ */
+
+static int acpi_force;
+
+static struct cpufreq_frequency_table *powernow_table;
+
+static unsigned int can_scale_bus;
+static unsigned int can_scale_vid;
+static unsigned int minimum_speed = -1;
+static unsigned int maximum_speed;
+static unsigned int number_scales;
+static unsigned int fsb;
+static unsigned int latency;
+static char have_a0;
+
+static int check_fsb(unsigned int fsbspeed)
+{
+	int delta;
+	unsigned int f = fsb / 1000;
+
+	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
+	return delta < 5;
+}
+
+static const struct x86_cpu_id powernow_k7_cpuids[] = {
+	{ X86_VENDOR_AMD, 6, },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
+
+static int check_powernow(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	unsigned int maxei, eax, ebx, ecx, edx;
+
+	if (!x86_match_cpu(powernow_k7_cpuids))
+		return 0;
+
+	/* Get maximum capabilities */
+	maxei = cpuid_eax(0x80000000);
+	if (maxei < 0x80000007) {	/* Any powernow info ? */
+#ifdef MODULE
+		pr_info("No powernow capabilities detected\n");
+#endif
+		return 0;
+	}
+
+	if ((c->x86_model == 6) && (c->x86_stepping == 0)) {
+		pr_info("K7 660[A0] core detected, enabling errata workarounds\n");
+		have_a0 = 1;
+	}
+
+	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+	/* Check we can actually do something before we say anything.*/
+	if (!(edx & (1 << 1 | 1 << 2)))
+		return 0;
+
+	pr_info("PowerNOW! Technology present. Can scale: ");
+
+	if (edx & 1 << 1) {
+		pr_cont("frequency");
+		can_scale_bus = 1;
+	}
+
+	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
+		pr_cont(" and ");
+
+	if (edx & 1 << 2) {
+		pr_cont("voltage");
+		can_scale_vid = 1;
+	}
+
+	pr_cont("\n");
+	return 1;
+}
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+static void invalidate_entry(unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+#endif
+
+static int get_ranges(unsigned char *pst)
+{
+	unsigned int j;
+	unsigned int speed;
+	u8 fid, vid;
+
+	powernow_table = kzalloc((sizeof(*powernow_table) *
+				(number_scales + 1)), GFP_KERNEL);
+	if (!powernow_table)
+		return -ENOMEM;
+
+	for (j = 0 ; j < number_scales; j++) {
+		fid = *pst++;
+
+		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
+		powernow_table[j].driver_data = fid; /* lower 8 bits */
+
+		speed = powernow_table[j].frequency;
+
+		if ((fid_codes[fid] % 10) == 5) {
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+			if (have_a0 == 1)
+				invalidate_entry(j);
+#endif
+		}
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+
+		vid = *pst++;
+		powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */
+
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+			 fid_codes[fid] % 10, speed/1000, vid,
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+	}
+	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
+	powernow_table[number_scales].driver_data = 0;
+
+	return 0;
+}
+
+
+static void change_FID(int fid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.FID != fid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.FID = fid;
+		fidvidctl.bits.VIDC = 0;
+		fidvidctl.bits.FIDC = 1;
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static void change_VID(int vid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.VID != vid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.VID = vid;
+		fidvidctl.bits.FIDC = 0;
+		fidvidctl.bits.VIDC = 1;
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static int powernow_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	u8 fid, vid;
+	struct cpufreq_freqs freqs;
+	union msr_fidvidstatus fidvidstatus;
+	int cfid;
+
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in powernow_decode_bios,
+	 * vid are the upper 8 bits.
+	 */
+
+	fid = powernow_table[index].driver_data & 0xFF;
+	vid = (powernow_table[index].driver_data & 0xFF00) >> 8;
+
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+	freqs.old = fsb * fid_codes[cfid] / 10;
+
+	freqs.new = powernow_table[index].frequency;
+
+	/* Now do the magic poking into the MSRs.  */
+
+	if (have_a0 == 1)	/* A0 errata 5 */
+		local_irq_disable();
+
+	if (freqs.old > freqs.new) {
+		/* Going down, so change FID first */
+		change_FID(fid);
+		change_VID(vid);
+	} else {
+		/* Going up, so change VID first */
+		change_VID(vid);
+		change_FID(fid);
+	}
+
+
+	if (have_a0 == 1)
+		local_irq_enable();
+
+	return 0;
+}
+
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+
+static struct acpi_processor_performance *acpi_processor_perf;
+
+static int powernow_acpi_init(void)
+{
+	int i;
+	int retval = 0;
+	union powernow_acpi_control_t pc;
+
+	if (acpi_processor_perf != NULL && powernow_table != NULL) {
+		retval = -EINVAL;
+		goto err0;
+	}
+
+	acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL);
+	if (!acpi_processor_perf) {
+		retval = -ENOMEM;
+		goto err0;
+	}
+
+	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto err05;
+	}
+
+	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
+		retval = -EIO;
+		goto err1;
+	}
+
+	if (acpi_processor_perf->control_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	if (acpi_processor_perf->status_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	number_scales = acpi_processor_perf->state_count;
+
+	if (number_scales < 2) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	powernow_table = kzalloc((sizeof(*powernow_table) *
+				(number_scales + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
+	for (i = 0; i < number_scales; i++) {
+		u8 fid, vid;
+		struct acpi_processor_px *state =
+			&acpi_processor_perf->states[i];
+		unsigned int speed, speed_mhz;
+
+		pc.val = (unsigned long) state->control;
+		pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+			 i,
+			 (u32) state->core_frequency,
+			 (u32) state->power,
+			 (u32) state->transition_latency,
+			 (u32) state->control,
+			 pc.bits.sgtc);
+
+		vid = pc.bits.vid;
+		fid = pc.bits.fid;
+
+		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
+		powernow_table[i].driver_data = fid; /* lower 8 bits */
+		powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */
+
+		speed = powernow_table[i].frequency;
+		speed_mhz = speed / 1000;
+
+		/* processor_perflib will multiply the MHz value by 1000 to
+		 * get a KHz value (e.g. 1266000). However, powernow-k7 works
+		 * with true KHz values (e.g. 1266768). To ensure that all
+		 * powernow frequencies are available, we must ensure that
+		 * ACPI doesn't restrict them, so we round up the MHz value
+		 * to ensure that perflib's computed KHz value is greater than
+		 * or equal to powernow's KHz value.
+		 */
+		if (speed % 1000 > 0)
+			speed_mhz++;
+
+		if ((fid_codes[fid] % 10) == 5) {
+			if (have_a0 == 1)
+				invalidate_entry(i);
+		}
+
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+			 fid_codes[fid] % 10, speed_mhz, vid,
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+
+		if (state->core_frequency != speed_mhz) {
+			state->core_frequency = speed_mhz;
+			pr_debug("   Corrected ACPI frequency to %d\n",
+				speed_mhz);
+		}
+
+		if (latency < pc.bits.sgtc)
+			latency = pc.bits.sgtc;
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+	}
+
+	powernow_table[i].frequency = CPUFREQ_TABLE_END;
+	powernow_table[i].driver_data = 0;
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	return 0;
+
+err2:
+	acpi_processor_unregister_performance(0);
+err1:
+	free_cpumask_var(acpi_processor_perf->shared_cpu_map);
+err05:
+	kfree(acpi_processor_perf);
+err0:
+	pr_warn("ACPI perflib can not be used on this platform\n");
+	acpi_processor_perf = NULL;
+	return retval;
+}
+#else
+static int powernow_acpi_init(void)
+{
+	pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n");
+	return -EINVAL;
+}
+#endif
+
+static void print_pst_entry(struct pst_s *pst, unsigned int j)
+{
+	pr_debug("PST:%d (@%p)\n", j, pst);
+	pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
+		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+}
+
+static int powernow_decode_bios(int maxfid, int startvid)
+{
+	struct psb_s *psb;
+	struct pst_s *pst;
+	unsigned int i, j;
+	unsigned char *p;
+	unsigned int etuple;
+	unsigned int ret;
+
+	etuple = cpuid_eax(0x80000001);
+
+	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
+
+		p = phys_to_virt(i);
+
+		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
+			pr_debug("Found PSB header at %p\n", p);
+			psb = (struct psb_s *) p;
+			pr_debug("Table version: 0x%x\n", psb->tableversion);
+			if (psb->tableversion != 0x12) {
+				pr_info("Sorry, only v1.2 tables supported right now\n");
+				return -ENODEV;
+			}
+
+			pr_debug("Flags: 0x%x\n", psb->flags);
+			if ((psb->flags & 1) == 0)
+				pr_debug("Mobile voltage regulator\n");
+			else
+				pr_debug("Desktop voltage regulator\n");
+
+			latency = psb->settlingtime;
+			if (latency < 100) {
+				pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n",
+					latency);
+				latency = 100;
+			}
+			pr_debug("Settling Time: %d microseconds.\n",
+					psb->settlingtime);
+			pr_debug("Has %d PST tables. (Only dumping ones "
+					"relevant to this CPU).\n",
+					psb->numpst);
+
+			p += sizeof(*psb);
+
+			pst = (struct pst_s *) p;
+
+			for (j = 0; j < psb->numpst; j++) {
+				pst = (struct pst_s *) p;
+				number_scales = pst->numpstates;
+
+				if ((etuple == pst->cpuid) &&
+				    check_fsb(pst->fsbspeed) &&
+				    (maxfid == pst->maxfid) &&
+				    (startvid == pst->startvid)) {
+					print_pst_entry(pst, j);
+					p = (char *)pst + sizeof(*pst);
+					ret = get_ranges(p);
+					return ret;
+				} else {
+					unsigned int k;
+					p = (char *)pst + sizeof(*pst);
+					for (k = 0; k < number_scales; k++)
+						p += 2;
+				}
+			}
+			pr_info("No PST tables match this cpuid (0x%x)\n",
+				etuple);
+			pr_info("This is indicative of a broken BIOS\n");
+
+			return -EINVAL;
+		}
+		p++;
+	}
+
+	return -ENODEV;
+}
+
+
+/*
+ * We use the fact that the bus frequency is somehow
+ * a multiple of 100000/3 khz, then we compute sgtc according
+ * to this multiple.
+ * That way, we match more how AMD thinks all of that work.
+ * We will then get the same kind of behaviour already tested under
+ * the "well-known" other OS.
+ */
+static int fixup_sgtc(void)
+{
+	unsigned int sgtc;
+	unsigned int m;
+
+	m = fsb / 3333;
+	if ((m % 10) >= 5)
+		m += 5;
+
+	m /= 10;
+
+	sgtc = 100 * m * latency;
+	sgtc = sgtc / 3;
+	if (sgtc > 0xfffff) {
+		pr_warn("SGTC too large %d\n", sgtc);
+		sgtc = 0xfffff;
+	}
+	return sgtc;
+}
+
+static unsigned int powernow_get(unsigned int cpu)
+{
+	union msr_fidvidstatus fidvidstatus;
+	unsigned int cfid;
+
+	if (cpu)
+		return 0;
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+
+	return fsb * fid_codes[cfid] / 10;
+}
+
+
+static int acer_cpufreq_pst(const struct dmi_system_id *d)
+{
+	pr_warn("%s laptop with broken PST tables in BIOS detected\n",
+		d->ident);
+	pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+	pr_warn("cpufreq scaling has been disabled as a result of this\n");
+	return 0;
+}
+
+/*
+ * Some Athlon laptops have really fucked PST tables.
+ * A BIOS update is all that can save them.
+ * Mention this, and disable cpufreq.
+ */
+static const struct dmi_system_id powernow_dmi_table[] = {
+	{
+		.callback = acer_cpufreq_pst,
+		.ident = "Acer Aspire",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
+			DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
+		},
+	},
+	{ }
+};
+
+static int powernow_cpu_init(struct cpufreq_policy *policy)
+{
+	union msr_fidvidstatus fidvidstatus;
+	int result;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+
+	recalibrate_cpu_khz();
+
+	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
+	if (!fsb) {
+		pr_warn("can not determine bus frequency\n");
+		return -EINVAL;
+	}
+	pr_debug("FSB: %3dMHz\n", fsb/1000);
+
+	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
+		pr_info("PSB/PST known to be broken - trying ACPI instead\n");
+		result = powernow_acpi_init();
+	} else {
+		result = powernow_decode_bios(fidvidstatus.bits.MFID,
+				fidvidstatus.bits.SVID);
+		if (result) {
+			pr_info("Trying ACPI perflib\n");
+			maximum_speed = 0;
+			minimum_speed = -1;
+			latency = 0;
+			result = powernow_acpi_init();
+			if (result) {
+				pr_info("ACPI and legacy methods failed\n");
+			}
+		} else {
+			/* SGTC use the bus clock as timer */
+			latency = fixup_sgtc();
+			pr_info("SGTC: %d\n", latency);
+		}
+	}
+
+	if (result)
+		return result;
+
+	pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n",
+		minimum_speed/1000, maximum_speed/1000);
+
+	policy->cpuinfo.transition_latency =
+		cpufreq_scale(2000000UL, fsb, latency);
+
+	return cpufreq_table_validate_and_show(policy, powernow_table);
+}
+
+static int powernow_cpu_exit(struct cpufreq_policy *policy)
+{
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	if (acpi_processor_perf) {
+		acpi_processor_unregister_performance(0);
+		free_cpumask_var(acpi_processor_perf->shared_cpu_map);
+		kfree(acpi_processor_perf);
+	}
+#endif
+
+	kfree(powernow_table);
+	return 0;
+}
+
+static struct cpufreq_driver powernow_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= powernow_target,
+	.get		= powernow_get,
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	.bios_limit	= acpi_processor_get_bios_limit,
+#endif
+	.init		= powernow_cpu_init,
+	.exit		= powernow_cpu_exit,
+	.name		= "powernow-k7",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init powernow_init(void)
+{
+	if (check_powernow() == 0)
+		return -ENODEV;
+	return cpufreq_register_driver(&powernow_driver);
+}
+
+
+static void __exit powernow_exit(void)
+{
+	cpufreq_unregister_driver(&powernow_driver);
+}
+
+module_param(acpi_force,  int, 0444);
+MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
+
+MODULE_AUTHOR("Dave Jones");
+MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernow_init);
+module_exit(powernow_exit);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.h b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.h
new file mode 100644
index 0000000..35fb4ea
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k7.h
@@ -0,0 +1,43 @@
+/*
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  AMD-specific information
+ *
+ */
+
+union msr_fidvidctl {
+	struct {
+		unsigned FID:5,			// 4:0
+		reserved1:3,	// 7:5
+		VID:5,			// 12:8
+		reserved2:3,	// 15:13
+		FIDC:1,			// 16
+		VIDC:1,			// 17
+		reserved3:2,	// 19:18
+		FIDCHGRATIO:1,	// 20
+		reserved4:11,	// 31-21
+		SGTC:20,		// 32:51
+		reserved5:12;	// 63:52
+	} bits;
+	unsigned long long val;
+};
+
+union msr_fidvidstatus {
+	struct {
+		unsigned CFID:5,			// 4:0
+		reserved1:3,	// 7:5
+		SFID:5,			// 12:8
+		reserved2:3,	// 15:13
+		MFID:5,			// 20:16
+		reserved3:11,	// 31:21
+		CVID:5,			// 36:32
+		reserved4:3,	// 39:37
+		SVID:5,			// 44:40
+		reserved5:3,	// 47:45
+		MVID:5,			// 52:48
+		reserved6:11;	// 63:53
+	} bits;
+	unsigned long long val;
+};
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.c b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.c
new file mode 100644
index 0000000..062d714
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.c
@@ -0,0 +1,1242 @@
+/*
+ *   (c) 2003-2012 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ *
+ *  Maintainer:
+ *  Andreas Herrmann <herrmann.der.user@googlemail.com>
+ *
+ *  Based on the powernow-k7.c module written by Dave Jones.
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs
+ *  (C) 2004 Dominik Brodowski <linux@brodo.de>
+ *  (C) 2004 Pavel Machek <pavel@ucw.cz>
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ *  Valuable input gratefully received from Dave Jones, Pavel Machek,
+ *  Dominik Brodowski, Jacob Shin, and others.
+ *  Originally developed by Paul Devriendt.
+ *
+ *  Processor information obtained from Chapter 9 (Power and Thermal
+ *  Management) of the "BIOS and Kernel Developer's Guide (BKDG) for
+ *  the AMD Athlon 64 and AMD Opteron Processors" and section "2.x
+ *  Power Management" in BKDGs for newer AMD CPU families.
+ *
+ *  Tables for specific CPUs can be inferred from AMD's processor
+ *  power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf)
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
+
+#include <linux/acpi.h>
+#include <linux/mutex.h>
+#include <acpi/processor.h>
+
+#define VERSION "version 2.20.00"
+#include "powernow-k8.h"
+
+/* serialize freq changes  */
+static DEFINE_MUTEX(fidvid_mutex);
+
+static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
+
+static struct cpufreq_driver cpufreq_amd64_driver;
+
+/* Return a frequency in MHz, given an input fid */
+static u32 find_freq_from_fid(u32 fid)
+{
+	return 800 + (fid * 100);
+}
+
+/* Return a frequency in KHz, given an input fid */
+static u32 find_khz_freq_from_fid(u32 fid)
+{
+	return 1000 * find_freq_from_fid(fid);
+}
+
+/* Return the vco fid for an input fid
+ *
+ * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
+ * only from corresponding high fids. This returns "high" fid corresponding to
+ * "low" one.
+ */
+static u32 convert_fid_to_vco_fid(u32 fid)
+{
+	if (fid < HI_FID_TABLE_BOTTOM)
+		return 8 + (2 * fid);
+	else
+		return fid;
+}
+
+/*
+ * Return 1 if the pending bit is set. Unless we just instructed the processor
+ * to transition to a new state, seeing this bit set is really bad news.
+ */
+static int pending_bit_stuck(void)
+{
+	u32 lo, hi;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
+}
+
+/*
+ * Update the global current fid / vid values from the status msr.
+ * Returns 1 on error.
+ */
+static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
+{
+	u32 lo, hi;
+	u32 i = 0;
+
+	do {
+		if (i++ > 10000) {
+			pr_debug("detected change pending stuck\n");
+			return 1;
+		}
+		rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	} while (lo & MSR_S_LO_CHANGE_PENDING);
+
+	data->currvid = hi & MSR_S_HI_CURRENT_VID;
+	data->currfid = lo & MSR_S_LO_CURRENT_FID;
+
+	return 0;
+}
+
+/* the isochronous relief time */
+static void count_off_irt(struct powernow_k8_data *data)
+{
+	udelay((1 << data->irt) * 10);
+	return;
+}
+
+/* the voltage stabilization time */
+static void count_off_vst(struct powernow_k8_data *data)
+{
+	udelay(data->vstable * VST_UNITS_20US);
+	return;
+}
+
+/* need to init the control msr to a safe value (for each cpu) */
+static void fidvid_msr_init(void)
+{
+	u32 lo, hi;
+	u8 fid, vid;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	vid = hi & MSR_S_HI_CURRENT_VID;
+	fid = lo & MSR_S_LO_CURRENT_FID;
+	lo = fid | (vid << MSR_C_LO_VID_SHIFT);
+	hi = MSR_C_HI_STP_GNT_BENIGN;
+	pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+	wrmsr(MSR_FIDVID_CTL, lo, hi);
+}
+
+/* write the new fid value along with the other control fields to the msr */
+static int write_new_fid(struct powernow_k8_data *data, u32 fid)
+{
+	u32 lo;
+	u32 savevid = data->currvid;
+	u32 i = 0;
+
+	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
+		pr_err("internal error - overflow on fid write\n");
+		return 1;
+	}
+
+	lo = fid;
+	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
+
+	pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}
+	} while (query_current_values_with_pending_wait(data));
+
+	count_off_irt(data);
+
+	if (savevid != data->currvid) {
+		pr_err("vid change on fid trans, old 0x%x, new 0x%x\n",
+		       savevid, data->currvid);
+		return 1;
+	}
+
+	if (fid != data->currfid) {
+		pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+			data->currfid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Write a new vid to the hardware */
+static int write_new_vid(struct powernow_k8_data *data, u32 vid)
+{
+	u32 lo;
+	u32 savefid = data->currfid;
+	int i = 0;
+
+	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
+		pr_err("internal error - overflow on vid write\n");
+		return 1;
+	}
+
+	lo = data->currfid;
+	lo |= (vid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
+
+	pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+		vid, lo, STOP_GRANT_5NS);
+
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+		if (i++ > 100) {
+			pr_err("internal error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}
+	} while (query_current_values_with_pending_wait(data));
+
+	if (savefid != data->currfid) {
+		pr_err("fid changed on vid trans, old 0x%x new 0x%x\n",
+			savefid, data->currfid);
+		return 1;
+	}
+
+	if (vid != data->currvid) {
+		pr_err("vid trans failed, vid 0x%x, curr 0x%x\n",
+				vid, data->currvid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Reduce the vid by the max of step or reqvid.
+ * Decreasing vid codes represent increasing voltages:
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
+ */
+static int decrease_vid_code_by_step(struct powernow_k8_data *data,
+		u32 reqvid, u32 step)
+{
+	if ((data->currvid - reqvid) > step)
+		reqvid = data->currvid - step;
+
+	if (write_new_vid(data, reqvid))
+		return 1;
+
+	count_off_vst(data);
+
+	return 0;
+}
+
+/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
+static int transition_fid_vid(struct powernow_k8_data *data,
+		u32 reqfid, u32 reqvid)
+{
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
+		return 1;
+
+	if (core_frequency_transition(data, reqfid))
+		return 1;
+
+	if (core_voltage_post_transition(data, reqvid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
+		pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+				smp_processor_id(),
+				reqfid, reqvid, data->currfid, data->currvid);
+		return 1;
+	}
+
+	pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 1 - core voltage transition ... setup voltage */
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+		u32 reqvid, u32 reqfid)
+{
+	u32 rvosteps = data->rvo;
+	u32 savefid = data->currfid;
+	u32 maxvid, lo, rvomult = 1;
+
+	pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqvid, data->rvo);
+
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
+	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+	maxvid = 0x1f & (maxvid >> 16);
+	pr_debug("ph1 maxvid=0x%x\n", maxvid);
+	if (reqvid < maxvid) /* lower numbers are higher voltages */
+		reqvid = maxvid;
+
+	while (data->currvid > reqvid) {
+		pr_debug("ph1: curr 0x%x, req vid 0x%x\n",
+			data->currvid, reqvid);
+		if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
+			return 1;
+	}
+
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
+		if (data->currvid == maxvid) {
+			rvosteps = 0;
+		} else {
+			pr_debug("ph1: changing vid for rvo, req 0x%x\n",
+				data->currvid - 1);
+			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
+				return 1;
+			rvosteps--;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savefid != data->currfid) {
+		pr_err("ph1 err, currfid changed 0x%x\n", data->currfid);
+		return 1;
+	}
+
+	pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 2 - core frequency transition */
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
+{
+	u32 vcoreqfid, vcocurrfid, vcofiddiff;
+	u32 fid_interval, savevid = data->currvid;
+
+	if (data->currfid == reqfid) {
+		pr_err("ph2 null fid transition 0x%x\n", data->currfid);
+		return 0;
+	}
+
+	pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqfid);
+
+	vcoreqfid = convert_fid_to_vco_fid(reqfid);
+	vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+	    : vcoreqfid - vcocurrfid;
+
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
+	while (vcofiddiff > 2) {
+		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
+		if (reqfid > data->currfid) {
+			if (data->currfid > LO_FID_TABLE_TOP) {
+				if (write_new_fid(data,
+						data->currfid + fid_interval))
+					return 1;
+			} else {
+				if (write_new_fid
+				    (data,
+				     2 + convert_fid_to_vco_fid(data->currfid)))
+					return 1;
+			}
+		} else {
+			if (write_new_fid(data, data->currfid - fid_interval))
+				return 1;
+		}
+
+		vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+		vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+		    : vcoreqfid - vcocurrfid;
+	}
+
+	if (write_new_fid(data, reqfid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (data->currfid != reqfid) {
+		pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+			data->currfid, reqfid);
+		return 1;
+	}
+
+	if (savevid != data->currvid) {
+		pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n",
+			savevid, data->currvid);
+		return 1;
+	}
+
+	pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 3 - core voltage transition flow ... jump to the final vid. */
+static int core_voltage_post_transition(struct powernow_k8_data *data,
+		u32 reqvid)
+{
+	u32 savefid = data->currfid;
+	u32 savereqvid = reqvid;
+
+	pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid);
+
+	if (reqvid != data->currvid) {
+		if (write_new_vid(data, reqvid))
+			return 1;
+
+		if (savefid != data->currfid) {
+			pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n",
+				savefid, data->currfid);
+			return 1;
+		}
+
+		if (data->currvid != reqvid) {
+			pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+				reqvid, data->currvid);
+			return 1;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savereqvid != data->currvid) {
+		pr_debug("ph3 failed, currvid 0x%x\n", data->currvid);
+		return 1;
+	}
+
+	if (savefid != data->currfid) {
+		pr_debug("ph3 failed, currfid changed 0x%x\n",
+			data->currfid);
+		return 1;
+	}
+
+	pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+static const struct x86_cpu_id powernow_k8_ids[] = {
+	/* IO based frequency switching */
+	{ X86_VENDOR_AMD, 0xf },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids);
+
+static void check_supported_cpu(void *_rc)
+{
+	u32 eax, ebx, ecx, edx;
+	int *rc = _rc;
+
+	*rc = -ENODEV;
+
+	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+
+	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
+		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
+			pr_info("Processor cpuid %x not supported\n", eax);
+			return;
+		}
+
+		eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+		if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+			pr_info("No frequency change capabilities detected\n");
+			return;
+		}
+
+		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+		if ((edx & P_STATE_TRANSITION_CAPABLE)
+			!= P_STATE_TRANSITION_CAPABLE) {
+			pr_info("Power state transitions not supported\n");
+			return;
+		}
+		*rc = 0;
+	}
+}
+
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
+		u8 maxvid)
+{
+	unsigned int j;
+	u8 lastfid = 0xff;
+
+	for (j = 0; j < data->numps; j++) {
+		if (pst[j].vid > LEAST_VID) {
+			pr_err(FW_BUG "vid %d invalid : 0x%x\n", j,
+				pst[j].vid);
+			return -EINVAL;
+		}
+		if (pst[j].vid < data->rvo) {
+			/* vid + rvo >= 0 */
+			pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j);
+			return -ENODEV;
+		}
+		if (pst[j].vid < maxvid + data->rvo) {
+			/* vid + rvo >= maxvid */
+			pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j);
+			return -ENODEV;
+		}
+		if (pst[j].fid > MAX_FID) {
+			pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j);
+			return -ENODEV;
+		}
+		if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
+			/* Only first fid is allowed to be in "low" range */
+			pr_err(FW_BUG "two low fids - %d : 0x%x\n", j,
+				pst[j].fid);
+			return -EINVAL;
+		}
+		if (pst[j].fid < lastfid)
+			lastfid = pst[j].fid;
+	}
+	if (lastfid & 1) {
+		pr_err(FW_BUG "lastfid invalid\n");
+		return -EINVAL;
+	}
+	if (lastfid > LO_FID_TABLE_TOP)
+		pr_info(FW_BUG "first fid not from lo freq table\n");
+
+	return 0;
+}
+
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+		unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+
+static void print_basics(struct powernow_k8_data *data)
+{
+	int j;
+	for (j = 0; j < data->numps; j++) {
+		if (data->powernow_table[j].frequency !=
+				CPUFREQ_ENTRY_INVALID) {
+			pr_info("fid 0x%x (%d MHz), vid 0x%x\n",
+				data->powernow_table[j].driver_data & 0xff,
+				data->powernow_table[j].frequency/1000,
+				data->powernow_table[j].driver_data >> 8);
+		}
+	}
+	if (data->batps)
+		pr_info("Only %d pstates on battery\n", data->batps);
+}
+
+static int fill_powernow_table(struct powernow_k8_data *data,
+		struct pst_s *pst, u8 maxvid)
+{
+	struct cpufreq_frequency_table *powernow_table;
+	unsigned int j;
+
+	if (data->batps) {
+		/* use ACPI support to get full speed on mains power */
+		pr_warn("Only %d pstates usable (use ACPI driver for full range\n",
+			data->batps);
+		data->numps = data->batps;
+	}
+
+	for (j = 1; j < data->numps; j++) {
+		if (pst[j-1].fid >= pst[j].fid) {
+			pr_err("PST out of sequence\n");
+			return -EINVAL;
+		}
+	}
+
+	if (data->numps < 2) {
+		pr_err("no p states to transition\n");
+		return -ENODEV;
+	}
+
+	if (check_pst_table(data, pst, maxvid))
+		return -EINVAL;
+
+	powernow_table = kzalloc((sizeof(*powernow_table)
+		* (data->numps + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		pr_err("powernow_table memory alloc failure\n");
+		return -ENOMEM;
+	}
+
+	for (j = 0; j < data->numps; j++) {
+		int freq;
+		powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */
+		powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */
+		freq = find_khz_freq_from_fid(pst[j].fid);
+		powernow_table[j].frequency = freq;
+	}
+	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->numps].driver_data = 0;
+
+	if (query_current_values_with_pending_wait(data)) {
+		kfree(powernow_table);
+		return -EIO;
+	}
+
+	pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+	data->powernow_table = powernow_table;
+	if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu)
+		print_basics(data);
+
+	for (j = 0; j < data->numps; j++)
+		if ((pst[j].fid == data->currfid) &&
+		    (pst[j].vid == data->currvid))
+			return 0;
+
+	pr_debug("currfid/vid do not match PST, ignoring\n");
+	return 0;
+}
+
+/* Find and validate the PSB/PST table in BIOS. */
+static int find_psb_table(struct powernow_k8_data *data)
+{
+	struct psb_s *psb;
+	unsigned int i;
+	u32 mvs;
+	u8 maxvid;
+	u32 cpst = 0;
+	u32 thiscpuid;
+
+	for (i = 0xc0000; i < 0xffff0; i += 0x10) {
+		/* Scan BIOS looking for the signature. */
+		/* It can not be at ffff0 - it is too big. */
+
+		psb = phys_to_virt(i);
+		if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
+			continue;
+
+		pr_debug("found PSB header at 0x%p\n", psb);
+
+		pr_debug("table vers: 0x%x\n", psb->tableversion);
+		if (psb->tableversion != PSB_VERSION_1_4) {
+			pr_err(FW_BUG "PSB table is not v1.4\n");
+			return -ENODEV;
+		}
+
+		pr_debug("flags: 0x%x\n", psb->flags1);
+		if (psb->flags1) {
+			pr_err(FW_BUG "unknown flags\n");
+			return -ENODEV;
+		}
+
+		data->vstable = psb->vstable;
+		pr_debug("voltage stabilization time: %d(*20us)\n",
+				data->vstable);
+
+		pr_debug("flags2: 0x%x\n", psb->flags2);
+		data->rvo = psb->flags2 & 3;
+		data->irt = ((psb->flags2) >> 2) & 3;
+		mvs = ((psb->flags2) >> 4) & 3;
+		data->vidmvs = 1 << mvs;
+		data->batps = ((psb->flags2) >> 6) & 3;
+
+		pr_debug("ramp voltage offset: %d\n", data->rvo);
+		pr_debug("isochronous relief time: %d\n", data->irt);
+		pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+
+		pr_debug("numpst: 0x%x\n", psb->num_tables);
+		cpst = psb->num_tables;
+		if ((psb->cpuid == 0x00000fc0) ||
+		    (psb->cpuid == 0x00000fe0)) {
+			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+			if ((thiscpuid == 0x00000fc0) ||
+			    (thiscpuid == 0x00000fe0))
+				cpst = 1;
+		}
+		if (cpst != 1) {
+			pr_err(FW_BUG "numpst must be 1\n");
+			return -ENODEV;
+		}
+
+		data->plllock = psb->plllocktime;
+		pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+		pr_debug("maxfid: 0x%x\n", psb->maxfid);
+		pr_debug("maxvid: 0x%x\n", psb->maxvid);
+		maxvid = psb->maxvid;
+
+		data->numps = psb->numps;
+		pr_debug("numpstates: 0x%x\n", data->numps);
+		return fill_powernow_table(data,
+				(struct pst_s *)(psb+1), maxvid);
+	}
+	/*
+	 * If you see this message, complain to BIOS manufacturer. If
+	 * he tells you "we do not support Linux" or some similar
+	 * nonsense, remember that Windows 2000 uses the same legacy
+	 * mechanism that the old Linux PSB driver uses. Tell them it
+	 * is broken with Windows 2000.
+	 *
+	 * The reference to the AMD documentation is chapter 9 in the
+	 * BIOS and Kernel Developer's Guide, which is available on
+	 * www.amd.com
+	 */
+	pr_err(FW_BUG "No PSB or ACPI _PSS objects\n");
+	pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n");
+	return -ENODEV;
+}
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	u64 control;
+
+	if (!data->acpi_data.state_count)
+		return;
+
+	control = data->acpi_data.states[index].control;
+	data->irt = (control >> IRT_SHIFT) & IRT_MASK;
+	data->rvo = (control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+	data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK;
+	data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK);
+	data->vstable = (control >> VST_SHIFT) & VST_MASK;
+}
+
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+	struct cpufreq_frequency_table *powernow_table;
+	int ret_val = -ENODEV;
+	u64 control, status;
+
+	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+		pr_debug("register performance failed: bad ACPI data\n");
+		return -EIO;
+	}
+
+	/* verify the data contained in the ACPI structures */
+	if (data->acpi_data.state_count <= 1) {
+		pr_debug("No ACPI P-States\n");
+		goto err_out;
+	}
+
+	control = data->acpi_data.control_register.space_id;
+	status = data->acpi_data.status_register.space_id;
+
+	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		pr_debug("Invalid control/status registers (%llx - %llx)\n",
+			control, status);
+		goto err_out;
+	}
+
+	/* fill in data->powernow_table */
+	powernow_table = kzalloc((sizeof(*powernow_table)
+		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		pr_debug("powernow_table memory alloc failure\n");
+		goto err_out;
+	}
+
+	/* fill in data */
+	data->numps = data->acpi_data.state_count;
+	powernow_k8_acpi_pst_values(data, 0);
+
+	ret_val = fill_powernow_table_fidvid(data, powernow_table);
+	if (ret_val)
+		goto err_out_mem;
+
+	powernow_table[data->acpi_data.state_count].frequency =
+		CPUFREQ_TABLE_END;
+	data->powernow_table = powernow_table;
+
+	if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu)
+		print_basics(data);
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+		pr_err("unable to alloc powernow_k8_data cpumask\n");
+		ret_val = -ENOMEM;
+		goto err_out_mem;
+	}
+
+	return 0;
+
+err_out_mem:
+	kfree(powernow_table);
+
+err_out:
+	acpi_processor_unregister_performance(data->cpu);
+
+	/* data->acpi_data.state_count informs us at ->exit()
+	 * whether ACPI was used */
+	data->acpi_data.state_count = 0;
+
+	return ret_val;
+}
+
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
+{
+	int i;
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		u32 fid;
+		u32 vid;
+		u32 freq, index;
+		u64 status, control;
+
+		if (data->exttype) {
+			status =  data->acpi_data.states[i].status;
+			fid = status & EXT_FID_MASK;
+			vid = (status >> VID_SHIFT) & EXT_VID_MASK;
+		} else {
+			control =  data->acpi_data.states[i].control;
+			fid = control & FID_MASK;
+			vid = (control >> VID_SHIFT) & VID_MASK;
+		}
+
+		pr_debug("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+
+		index = fid | (vid<<8);
+		powernow_table[i].driver_data = index;
+
+		freq = find_khz_freq_from_fid(fid);
+		powernow_table[i].frequency = freq;
+
+		/* verify frequency is OK */
+		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
+			pr_debug("invalid freq %u kHz, ignoring\n", freq);
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+
+		/* verify voltage is OK -
+		 * BIOSs are using "off" to indicate invalid */
+		if (vid == VID_OFF) {
+			pr_debug("invalid vid %u, ignoring\n", vid);
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+
+		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
+			pr_info("invalid freq entries %u kHz vs. %u kHz\n",
+				freq, (unsigned int)
+				(data->acpi_data.states[i].core_frequency
+				 * 1000));
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+	}
+	return 0;
+}
+
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+	if (data->acpi_data.state_count)
+		acpi_processor_unregister_performance(data->cpu);
+	free_cpumask_var(data->acpi_data.shared_cpu_map);
+}
+
+static int get_transition_latency(struct powernow_k8_data *data)
+{
+	int max_latency = 0;
+	int i;
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		int cur_latency = data->acpi_data.states[i].transition_latency
+			+ data->acpi_data.states[i].bus_master_latency;
+		if (cur_latency > max_latency)
+			max_latency = cur_latency;
+	}
+	if (max_latency == 0) {
+		pr_err(FW_WARN "Invalid zero transition latency\n");
+		max_latency = 1;
+	}
+	/* value in usecs, needs to be in nanoseconds */
+	return 1000 * max_latency;
+}
+
+/* Take a frequency, and issue the fid/vid transition command */
+static int transition_frequency_fidvid(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	struct cpufreq_policy *policy;
+	u32 fid = 0;
+	u32 vid = 0;
+	int res;
+	struct cpufreq_freqs freqs;
+
+	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+	/* fid/vid correctness check for k8 */
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in find_psb_table, vid
+	 * are the upper 8 bits.
+	 */
+	fid = data->powernow_table[index].driver_data & 0xFF;
+	vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8;
+
+	pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((data->currvid == vid) && (data->currfid == fid)) {
+		pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
+			fid, vid);
+		return 0;
+	}
+
+	pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), fid, vid);
+	freqs.old = find_khz_freq_from_fid(data->currfid);
+	freqs.new = find_khz_freq_from_fid(fid);
+
+	policy = cpufreq_cpu_get(smp_processor_id());
+	cpufreq_cpu_put(policy);
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	res = transition_fid_vid(data, fid, vid);
+	cpufreq_freq_transition_end(policy, &freqs, res);
+
+	return res;
+}
+
+struct powernowk8_target_arg {
+	struct cpufreq_policy		*pol;
+	unsigned			newstate;
+};
+
+static long powernowk8_target_fn(void *arg)
+{
+	struct powernowk8_target_arg *pta = arg;
+	struct cpufreq_policy *pol = pta->pol;
+	unsigned newstate = pta->newstate;
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+	u32 checkfid;
+	u32 checkvid;
+	int ret;
+
+	if (!data)
+		return -EINVAL;
+
+	checkfid = data->currfid;
+	checkvid = data->currvid;
+
+	if (pending_bit_stuck()) {
+		pr_err("failing targ, change pending bit set\n");
+		return -EIO;
+	}
+
+	pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n",
+		pol->cpu, data->powernow_table[newstate].frequency, pol->min,
+		pol->max);
+
+	if (query_current_values_with_pending_wait(data))
+		return -EIO;
+
+	pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
+		data->currfid, data->currvid);
+
+	if ((checkvid != data->currvid) ||
+	    (checkfid != data->currfid)) {
+		pr_info("error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+		       checkfid, data->currfid,
+		       checkvid, data->currvid);
+	}
+
+	mutex_lock(&fidvid_mutex);
+
+	powernow_k8_acpi_pst_values(data, newstate);
+
+	ret = transition_frequency_fidvid(data, newstate);
+
+	if (ret) {
+		pr_err("transition frequency failed\n");
+		mutex_unlock(&fidvid_mutex);
+		return 1;
+	}
+	mutex_unlock(&fidvid_mutex);
+
+	pol->cur = find_khz_freq_from_fid(data->currfid);
+
+	return 0;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned index)
+{
+	struct powernowk8_target_arg pta = { .pol = pol, .newstate = index };
+
+	return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
+}
+
+struct init_on_cpu {
+	struct powernow_k8_data *data;
+	int rc;
+};
+
+static void powernowk8_cpu_init_on_cpu(void *_init_on_cpu)
+{
+	struct init_on_cpu *init_on_cpu = _init_on_cpu;
+
+	if (pending_bit_stuck()) {
+		pr_err("failing init, change pending bit set\n");
+		init_on_cpu->rc = -ENODEV;
+		return;
+	}
+
+	if (query_current_values_with_pending_wait(init_on_cpu->data)) {
+		init_on_cpu->rc = -ENODEV;
+		return;
+	}
+
+	fidvid_msr_init();
+
+	init_on_cpu->rc = 0;
+}
+
+#define MISSING_PSS_MSG \
+	FW_BUG "No compatible ACPI _PSS objects found.\n" \
+	FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \
+	FW_BUG "If that doesn't help, try upgrading your BIOS.\n"
+
+/* per CPU init entry point to the driver */
+static int powernowk8_cpu_init(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data;
+	struct init_on_cpu init_on_cpu;
+	int rc, cpu;
+
+	smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
+	if (rc)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		pr_err("unable to alloc powernow_k8_data");
+		return -ENOMEM;
+	}
+
+	data->cpu = pol->cpu;
+
+	if (powernow_k8_cpu_init_acpi(data)) {
+		/*
+		 * Use the PSB BIOS structure. This is only available on
+		 * an UP version, and is deprecated by AMD.
+		 */
+		if (num_online_cpus() != 1) {
+			pr_err_once(MISSING_PSS_MSG);
+			goto err_out;
+		}
+		if (pol->cpu != 0) {
+			pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n");
+			goto err_out;
+		}
+		rc = find_psb_table(data);
+		if (rc)
+			goto err_out;
+
+		/* Take a crude guess here.
+		 * That guess was in microseconds, so multiply with 1000 */
+		pol->cpuinfo.transition_latency = (
+			 ((data->rvo + 8) * data->vstable * VST_UNITS_20US) +
+			 ((1 << data->irt) * 30)) * 1000;
+	} else /* ACPI _PSS objects available */
+		pol->cpuinfo.transition_latency = get_transition_latency(data);
+
+	/* only run on specific CPU from here on */
+	init_on_cpu.data = data;
+	smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu,
+				 &init_on_cpu, 1);
+	rc = init_on_cpu.rc;
+	if (rc != 0)
+		goto err_out_exit_acpi;
+
+	cpumask_copy(pol->cpus, topology_core_cpumask(pol->cpu));
+	data->available_cores = pol->cpus;
+
+	/* min/max the cpu is capable of */
+	if (cpufreq_table_validate_and_show(pol, data->powernow_table)) {
+		pr_err(FW_BUG "invalid powernow_table\n");
+		powernow_k8_cpu_exit_acpi(data);
+		kfree(data->powernow_table);
+		kfree(data);
+		return -EINVAL;
+	}
+
+	pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
+		data->currfid, data->currvid);
+
+	/* Point all the CPUs in this policy to the same data */
+	for_each_cpu(cpu, pol->cpus)
+		per_cpu(powernow_data, cpu) = data;
+
+	return 0;
+
+err_out_exit_acpi:
+	powernow_k8_cpu_exit_acpi(data);
+
+err_out:
+	kfree(data);
+	return -ENODEV;
+}
+
+static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+	int cpu;
+
+	if (!data)
+		return -EINVAL;
+
+	powernow_k8_cpu_exit_acpi(data);
+
+	kfree(data->powernow_table);
+	kfree(data);
+	for_each_cpu(cpu, pol->cpus)
+		per_cpu(powernow_data, cpu) = NULL;
+
+	return 0;
+}
+
+static void query_values_on_cpu(void *_err)
+{
+	int *err = _err;
+	struct powernow_k8_data *data = __this_cpu_read(powernow_data);
+
+	*err = query_current_values_with_pending_wait(data);
+}
+
+static unsigned int powernowk8_get(unsigned int cpu)
+{
+	struct powernow_k8_data *data = per_cpu(powernow_data, cpu);
+	unsigned int khz = 0;
+	int err;
+
+	if (!data)
+		return 0;
+
+	smp_call_function_single(cpu, query_values_on_cpu, &err, true);
+	if (err)
+		goto out;
+
+	khz = find_khz_freq_from_fid(data->currfid);
+
+
+out:
+	return khz;
+}
+
+static struct cpufreq_driver cpufreq_amd64_driver = {
+	.flags		= CPUFREQ_ASYNC_NOTIFICATION,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= powernowk8_target,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= powernowk8_cpu_init,
+	.exit		= powernowk8_cpu_exit,
+	.get		= powernowk8_get,
+	.name		= "powernow-k8",
+	.attr		= cpufreq_generic_attr,
+};
+
+static void __request_acpi_cpufreq(void)
+{
+	const char drv[] = "acpi-cpufreq";
+	const char *cur_drv;
+
+	cur_drv = cpufreq_get_current_driver();
+	if (!cur_drv)
+		goto request;
+
+	if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv))))
+		pr_warn("WTF driver: %s\n", cur_drv);
+
+	return;
+
+ request:
+	pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n");
+	request_module(drv);
+}
+
+/* driver entry point for init */
+static int powernowk8_init(void)
+{
+	unsigned int i, supported_cpus = 0;
+	int ret;
+
+	if (static_cpu_has(X86_FEATURE_HW_PSTATE)) {
+		__request_acpi_cpufreq();
+		return -ENODEV;
+	}
+
+	if (!x86_match_cpu(powernow_k8_ids))
+		return -ENODEV;
+
+	get_online_cpus();
+	for_each_online_cpu(i) {
+		smp_call_function_single(i, check_supported_cpu, &ret, 1);
+		if (!ret)
+			supported_cpus++;
+	}
+
+	if (supported_cpus != num_online_cpus()) {
+		put_online_cpus();
+		return -ENODEV;
+	}
+	put_online_cpus();
+
+	ret = cpufreq_register_driver(&cpufreq_amd64_driver);
+	if (ret)
+		return ret;
+
+	pr_info("Found %d %s (%d cpu cores) (" VERSION ")\n",
+		num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
+
+	return ret;
+}
+
+/* driver entry point for term */
+static void __exit powernowk8_exit(void)
+{
+	pr_debug("exit\n");
+
+	cpufreq_unregister_driver(&cpufreq_amd64_driver);
+}
+
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernowk8_init);
+module_exit(powernowk8_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.h b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.h
new file mode 100644
index 0000000..45ce11e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernow-k8.h
@@ -0,0 +1,190 @@
+/*
+ *  (c) 2003-2006 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+struct powernow_k8_data {
+	unsigned int cpu;
+
+	u32 numps;  /* number of p-states */
+	u32 batps;  /* number of p-states supported on battery */
+
+	/* these values are constant when the PSB is used to determine
+	 * vid/fid pairings, but are modified during the ->target() call
+	 * when ACPI is used */
+	u32 rvo;     /* ramp voltage offset */
+	u32 irt;     /* isochronous relief time */
+	u32 vidmvs;  /* usable value calculated from mvs */
+	u32 vstable; /* voltage stabilization time, units 20 us */
+	u32 plllock; /* pll lock time, units 1 us */
+	u32 exttype; /* extended interface = 1 */
+
+	/* keep track of the current fid / vid or pstate */
+	u32 currvid;
+	u32 currfid;
+
+	/* the powernow_table includes all frequency and vid/fid pairings:
+	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+	 * frequency is in kHz */
+	struct cpufreq_frequency_table  *powernow_table;
+
+	/* the acpi table needs to be kept. it's only available if ACPI was
+	 * used to determine valid frequency/vid/fid states */
+	struct acpi_processor_performance acpi_data;
+
+	/* we need to keep track of associated cores, but let cpufreq
+	 * handle hotplug events - so just point at cpufreq pol->cpus
+	 * structure */
+	struct cpumask *available_cores;
+};
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
+#define CPUID_XFAM			0x0ff00000	/* extended family */
+#define CPUID_XFAM_K8			0
+#define CPUID_XMOD			0x000f0000	/* extended model */
+#define CPUID_XMOD_REV_MASK		0x000c0000
+#define CPUID_XFAM_10H			0x00100000	/* family 0x10 */
+#define CPUID_USE_XFAM_XMOD		0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES	0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
+#define P_STATE_TRANSITION_CAPABLE	6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL      0xc0010041
+#define MSR_FIDVID_STATUS   0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID     0x00010000
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
+#define MSR_C_LO_VID_SHIFT        8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO	  0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
+#define MSR_S_LO_MAX_FID          0x003f0000
+#define MSR_S_LO_START_FID        0x00003f00
+#define MSR_S_LO_CURRENT_FID      0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ *   low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ *   in the low fid table
+ * - the parts can only step at <= 200 MHz intervals, odd fid values are
+ *   supported in revision G and later revisions.
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ *   (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP     7	/* fid values marking the boundary    */
+#define HI_FID_TABLE_BOTTOM  8	/* between the low and high tables    */
+
+#define LO_VCOFREQ_TABLE_TOP    1400	/* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800	/* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc0  /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
+
+/*
+ * Most values of interest are encoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+
+#define IRT_SHIFT      30
+#define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
+#define PLL_L_SHIFT    20
+#define MVS_SHIFT      18
+#define VST_SHIFT      11
+#define VID_SHIFT       6
+#define IRT_MASK        3
+#define RVO_MASK        3
+#define EXT_TYPE_MASK   1
+#define PLL_L_MASK   0x7f
+#define MVS_MASK        3
+#define VST_MASK     0x7f
+#define VID_MASK     0x1f
+#define FID_MASK     0x1f
+#define EXT_VID_MASK 0x3f
+#define EXT_FID_MASK 0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING      "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN  10
+
+#define PSB_VERSION_1_4  0x14
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags1;
+	u16 vstable;
+	u8 flags2;
+	u8 num_tables;
+	u32 cpuid;
+	u8 plllocktime;
+	u8 maxfid;
+	u8 maxvid;
+	u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+	u8 fid;
+	u8 vid;
+};
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/powernv-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/powernv-cpufreq.c
new file mode 100644
index 0000000..dc81fc2
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/powernv-cpufreq.c
@@ -0,0 +1,1117 @@
+/*
+ * POWERNV cpufreq driver for the IBM POWER processors
+ *
+ * (C) Copyright IBM 2014
+ *
+ * Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt)	"powernv-cpufreq: " fmt
+
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/cpu.h>
+#include <trace/events/power.h>
+
+#include <asm/cputhreads.h>
+#include <asm/firmware.h>
+#include <asm/reg.h>
+#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
+#include <asm/opal.h>
+#include <linux/timer.h>
+
+#define POWERNV_MAX_PSTATES	256
+#define PMSR_PSAFE_ENABLE	(1UL << 30)
+#define PMSR_SPR_EM_DISABLE	(1UL << 31)
+#define MAX_PSTATE_SHIFT	32
+#define LPSTATE_SHIFT		48
+#define GPSTATE_SHIFT		56
+
+#define MAX_RAMP_DOWN_TIME				5120
+/*
+ * On an idle system we want the global pstate to ramp-down from max value to
+ * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and
+ * then ramp-down rapidly later on.
+ *
+ * This gives a percentage rampdown for time elapsed in milliseconds.
+ * ramp_down_percentage = ((ms * ms) >> 18)
+ *			~= 3.8 * (sec * sec)
+ *
+ * At 0 ms	ramp_down_percent = 0
+ * At 5120 ms	ramp_down_percent = 100
+ */
+#define ramp_down_percent(time)		((time * time) >> 18)
+
+/* Interval after which the timer is queued to bring down global pstate */
+#define GPSTATE_TIMER_INTERVAL				2000
+
+/**
+ * struct global_pstate_info -	Per policy data structure to maintain history of
+ *				global pstates
+ * @highest_lpstate_idx:	The local pstate index from which we are
+ *				ramping down
+ * @elapsed_time:		Time in ms spent in ramping down from
+ *				highest_lpstate_idx
+ * @last_sampled_time:		Time from boot in ms when global pstates were
+ *				last set
+ * @last_lpstate_idx,		Last set value of local pstate and global
+ * last_gpstate_idx		pstate in terms of cpufreq table index
+ * @timer:			Is used for ramping down if cpu goes idle for
+ *				a long time with global pstate held high
+ * @gpstate_lock:		A spinlock to maintain synchronization between
+ *				routines called by the timer handler and
+ *				governer's target_index calls
+ */
+struct global_pstate_info {
+	int highest_lpstate_idx;
+	unsigned int elapsed_time;
+	unsigned int last_sampled_time;
+	int last_lpstate_idx;
+	int last_gpstate_idx;
+	spinlock_t gpstate_lock;
+	struct timer_list timer;
+};
+
+static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
+u32 pstate_sign_prefix;
+static bool rebooting, throttled, occ_reset;
+
+static const char * const throttle_reason[] = {
+	"No throttling",
+	"Power Cap",
+	"Processor Over Temperature",
+	"Power Supply Failure",
+	"Over Current",
+	"OCC Reset"
+};
+
+enum throttle_reason_type {
+	NO_THROTTLE = 0,
+	POWERCAP,
+	CPU_OVERTEMP,
+	POWER_SUPPLY_FAILURE,
+	OVERCURRENT,
+	OCC_RESET_THROTTLE,
+	OCC_MAX_REASON
+};
+
+static struct chip {
+	unsigned int id;
+	bool throttled;
+	bool restore;
+	u8 throttle_reason;
+	cpumask_t mask;
+	struct work_struct throttle;
+	int throttle_turbo;
+	int throttle_sub_turbo;
+	int reason[OCC_MAX_REASON];
+} *chips;
+
+static int nr_chips;
+static DEFINE_PER_CPU(struct chip *, chip_info);
+
+/*
+ * Note:
+ * The set of pstates consists of contiguous integers.
+ * powernv_pstate_info stores the index of the frequency table for
+ * max, min and nominal frequencies. It also stores number of
+ * available frequencies.
+ *
+ * powernv_pstate_info.nominal indicates the index to the highest
+ * non-turbo frequency.
+ */
+static struct powernv_pstate_info {
+	unsigned int min;
+	unsigned int max;
+	unsigned int nominal;
+	unsigned int nr_pstates;
+	bool wof_enabled;
+} powernv_pstate_info;
+
+static inline int extract_pstate(u64 pmsr_val, unsigned int shift)
+{
+	int ret = ((pmsr_val >> shift) & 0xFF);
+
+	if (!ret)
+		return ret;
+
+	return (pstate_sign_prefix | ret);
+}
+
+#define extract_local_pstate(x) extract_pstate(x, LPSTATE_SHIFT)
+#define extract_global_pstate(x) extract_pstate(x, GPSTATE_SHIFT)
+#define extract_max_pstate(x)  extract_pstate(x, MAX_PSTATE_SHIFT)
+
+/* Use following macros for conversions between pstate_id and index */
+static inline int idx_to_pstate(unsigned int i)
+{
+	if (unlikely(i >= powernv_pstate_info.nr_pstates)) {
+		pr_warn_once("index %u is out of bound\n", i);
+		return powernv_freqs[powernv_pstate_info.nominal].driver_data;
+	}
+
+	return powernv_freqs[i].driver_data;
+}
+
+static inline unsigned int pstate_to_idx(int pstate)
+{
+	int min = powernv_freqs[powernv_pstate_info.min].driver_data;
+	int max = powernv_freqs[powernv_pstate_info.max].driver_data;
+
+	if (min > 0) {
+		if (unlikely((pstate < max) || (pstate > min))) {
+			pr_warn_once("pstate %d is out of bound\n", pstate);
+			return powernv_pstate_info.nominal;
+		}
+	} else {
+		if (unlikely((pstate > max) || (pstate < min))) {
+			pr_warn_once("pstate %d is out of bound\n", pstate);
+			return powernv_pstate_info.nominal;
+		}
+	}
+	/*
+	 * abs() is deliberately used so that is works with
+	 * both monotonically increasing and decreasing
+	 * pstate values
+	 */
+	return abs(pstate - idx_to_pstate(powernv_pstate_info.max));
+}
+
+static inline void reset_gpstates(struct cpufreq_policy *policy)
+{
+	struct global_pstate_info *gpstates = policy->driver_data;
+
+	gpstates->highest_lpstate_idx = 0;
+	gpstates->elapsed_time = 0;
+	gpstates->last_sampled_time = 0;
+	gpstates->last_lpstate_idx = 0;
+	gpstates->last_gpstate_idx = 0;
+}
+
+/*
+ * Initialize the freq table based on data obtained
+ * from the firmware passed via device-tree
+ */
+static int init_powernv_pstates(void)
+{
+	struct device_node *power_mgt;
+	int i, nr_pstates = 0;
+	const __be32 *pstate_ids, *pstate_freqs;
+	u32 len_ids, len_freqs;
+	u32 pstate_min, pstate_max, pstate_nominal;
+	u32 pstate_turbo, pstate_ultra_turbo;
+
+	power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
+	if (!power_mgt) {
+		pr_warn("power-mgt node not found\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) {
+		pr_warn("ibm,pstate-min node not found\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) {
+		pr_warn("ibm,pstate-max node not found\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(power_mgt, "ibm,pstate-nominal",
+				 &pstate_nominal)) {
+		pr_warn("ibm,pstate-nominal not found\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(power_mgt, "ibm,pstate-ultra-turbo",
+				 &pstate_ultra_turbo)) {
+		powernv_pstate_info.wof_enabled = false;
+		goto next;
+	}
+
+	if (of_property_read_u32(power_mgt, "ibm,pstate-turbo",
+				 &pstate_turbo)) {
+		powernv_pstate_info.wof_enabled = false;
+		goto next;
+	}
+
+	if (pstate_turbo == pstate_ultra_turbo)
+		powernv_pstate_info.wof_enabled = false;
+	else
+		powernv_pstate_info.wof_enabled = true;
+
+next:
+	pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min,
+		pstate_nominal, pstate_max);
+	pr_info("Workload Optimized Frequency is %s in the platform\n",
+		(powernv_pstate_info.wof_enabled) ? "enabled" : "disabled");
+
+	pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids);
+	if (!pstate_ids) {
+		pr_warn("ibm,pstate-ids not found\n");
+		return -ENODEV;
+	}
+
+	pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz",
+				      &len_freqs);
+	if (!pstate_freqs) {
+		pr_warn("ibm,pstate-frequencies-mhz not found\n");
+		return -ENODEV;
+	}
+
+	if (len_ids != len_freqs) {
+		pr_warn("Entries in ibm,pstate-ids and "
+			"ibm,pstate-frequencies-mhz does not match\n");
+	}
+
+	nr_pstates = min(len_ids, len_freqs) / sizeof(u32);
+	if (!nr_pstates) {
+		pr_warn("No PStates found\n");
+		return -ENODEV;
+	}
+
+	powernv_pstate_info.nr_pstates = nr_pstates;
+	pr_debug("NR PStates %d\n", nr_pstates);
+
+	pstate_sign_prefix = pstate_min & ~0xFF;
+
+	for (i = 0; i < nr_pstates; i++) {
+		u32 id = be32_to_cpu(pstate_ids[i]);
+		u32 freq = be32_to_cpu(pstate_freqs[i]);
+
+		pr_debug("PState id %d freq %d MHz\n", id, freq);
+		powernv_freqs[i].frequency = freq * 1000; /* kHz */
+		powernv_freqs[i].driver_data = id;
+
+		if (id == pstate_max)
+			powernv_pstate_info.max = i;
+		if (id == pstate_nominal)
+			powernv_pstate_info.nominal = i;
+		if (id == pstate_min)
+			powernv_pstate_info.min = i;
+
+		if (powernv_pstate_info.wof_enabled && id == pstate_turbo) {
+			int j;
+
+			for (j = i - 1; j >= (int)powernv_pstate_info.max; j--)
+				powernv_freqs[j].flags = CPUFREQ_BOOST_FREQ;
+		}
+	}
+
+	/* End of list marker entry */
+	powernv_freqs[i].frequency = CPUFREQ_TABLE_END;
+	return 0;
+}
+
+/* Returns the CPU frequency corresponding to the pstate_id. */
+static unsigned int pstate_id_to_freq(int pstate_id)
+{
+	int i;
+
+	i = pstate_to_idx(pstate_id);
+	if (i >= powernv_pstate_info.nr_pstates || i < 0) {
+		pr_warn("PState id %d outside of PState table, "
+			"reporting nominal id %d instead\n",
+			pstate_id, idx_to_pstate(powernv_pstate_info.nominal));
+		i = powernv_pstate_info.nominal;
+	}
+
+	return powernv_freqs[i].frequency;
+}
+
+/*
+ * cpuinfo_nominal_freq_show - Show the nominal CPU frequency as indicated by
+ * the firmware
+ */
+static ssize_t cpuinfo_nominal_freq_show(struct cpufreq_policy *policy,
+					char *buf)
+{
+	return sprintf(buf, "%u\n",
+		powernv_freqs[powernv_pstate_info.nominal].frequency);
+}
+
+struct freq_attr cpufreq_freq_attr_cpuinfo_nominal_freq =
+	__ATTR_RO(cpuinfo_nominal_freq);
+
+#define SCALING_BOOST_FREQS_ATTR_INDEX		2
+
+static struct freq_attr *powernv_cpu_freq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&cpufreq_freq_attr_cpuinfo_nominal_freq,
+	&cpufreq_freq_attr_scaling_boost_freqs,
+	NULL,
+};
+
+#define throttle_attr(name, member)					\
+static ssize_t name##_show(struct cpufreq_policy *policy, char *buf)	\
+{									\
+	struct chip *chip = per_cpu(chip_info, policy->cpu);		\
+									\
+	return sprintf(buf, "%u\n", chip->member);			\
+}									\
+									\
+static struct freq_attr throttle_attr_##name = __ATTR_RO(name)		\
+
+throttle_attr(unthrottle, reason[NO_THROTTLE]);
+throttle_attr(powercap, reason[POWERCAP]);
+throttle_attr(overtemp, reason[CPU_OVERTEMP]);
+throttle_attr(supply_fault, reason[POWER_SUPPLY_FAILURE]);
+throttle_attr(overcurrent, reason[OVERCURRENT]);
+throttle_attr(occ_reset, reason[OCC_RESET_THROTTLE]);
+throttle_attr(turbo_stat, throttle_turbo);
+throttle_attr(sub_turbo_stat, throttle_sub_turbo);
+
+static struct attribute *throttle_attrs[] = {
+	&throttle_attr_unthrottle.attr,
+	&throttle_attr_powercap.attr,
+	&throttle_attr_overtemp.attr,
+	&throttle_attr_supply_fault.attr,
+	&throttle_attr_overcurrent.attr,
+	&throttle_attr_occ_reset.attr,
+	&throttle_attr_turbo_stat.attr,
+	&throttle_attr_sub_turbo_stat.attr,
+	NULL,
+};
+
+static const struct attribute_group throttle_attr_grp = {
+	.name	= "throttle_stats",
+	.attrs	= throttle_attrs,
+};
+
+/* Helper routines */
+
+/* Access helpers to power mgt SPR */
+
+static inline unsigned long get_pmspr(unsigned long sprn)
+{
+	switch (sprn) {
+	case SPRN_PMCR:
+		return mfspr(SPRN_PMCR);
+
+	case SPRN_PMICR:
+		return mfspr(SPRN_PMICR);
+
+	case SPRN_PMSR:
+		return mfspr(SPRN_PMSR);
+	}
+	BUG();
+}
+
+static inline void set_pmspr(unsigned long sprn, unsigned long val)
+{
+	switch (sprn) {
+	case SPRN_PMCR:
+		mtspr(SPRN_PMCR, val);
+		return;
+
+	case SPRN_PMICR:
+		mtspr(SPRN_PMICR, val);
+		return;
+	}
+	BUG();
+}
+
+/*
+ * Use objects of this type to query/update
+ * pstates on a remote CPU via smp_call_function.
+ */
+struct powernv_smp_call_data {
+	unsigned int freq;
+	int pstate_id;
+	int gpstate_id;
+};
+
+/*
+ * powernv_read_cpu_freq: Reads the current frequency on this CPU.
+ *
+ * Called via smp_call_function.
+ *
+ * Note: The caller of the smp_call_function should pass an argument of
+ * the type 'struct powernv_smp_call_data *' along with this function.
+ *
+ * The current frequency on this CPU will be returned via
+ * ((struct powernv_smp_call_data *)arg)->freq;
+ */
+static void powernv_read_cpu_freq(void *arg)
+{
+	unsigned long pmspr_val;
+	struct powernv_smp_call_data *freq_data = arg;
+
+	pmspr_val = get_pmspr(SPRN_PMSR);
+	freq_data->pstate_id = extract_local_pstate(pmspr_val);
+	freq_data->freq = pstate_id_to_freq(freq_data->pstate_id);
+
+	pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n",
+		raw_smp_processor_id(), pmspr_val, freq_data->pstate_id,
+		freq_data->freq);
+}
+
+/*
+ * powernv_cpufreq_get: Returns the CPU frequency as reported by the
+ * firmware for CPU 'cpu'. This value is reported through the sysfs
+ * file cpuinfo_cur_freq.
+ */
+static unsigned int powernv_cpufreq_get(unsigned int cpu)
+{
+	struct powernv_smp_call_data freq_data;
+
+	smp_call_function_any(cpu_sibling_mask(cpu), powernv_read_cpu_freq,
+			&freq_data, 1);
+
+	return freq_data.freq;
+}
+
+/*
+ * set_pstate: Sets the pstate on this CPU.
+ *
+ * This is called via an smp_call_function.
+ *
+ * The caller must ensure that freq_data is of the type
+ * (struct powernv_smp_call_data *) and the pstate_id which needs to be set
+ * on this CPU should be present in freq_data->pstate_id.
+ */
+static void set_pstate(void *data)
+{
+	unsigned long val;
+	struct powernv_smp_call_data *freq_data = data;
+	unsigned long pstate_ul = freq_data->pstate_id;
+	unsigned long gpstate_ul = freq_data->gpstate_id;
+
+	val = get_pmspr(SPRN_PMCR);
+	val = val & 0x0000FFFFFFFFFFFFULL;
+
+	pstate_ul = pstate_ul & 0xFF;
+	gpstate_ul = gpstate_ul & 0xFF;
+
+	/* Set both global(bits 56..63) and local(bits 48..55) PStates */
+	val = val | (gpstate_ul << 56) | (pstate_ul << 48);
+
+	pr_debug("Setting cpu %d pmcr to %016lX\n",
+			raw_smp_processor_id(), val);
+	set_pmspr(SPRN_PMCR, val);
+}
+
+/*
+ * get_nominal_index: Returns the index corresponding to the nominal
+ * pstate in the cpufreq table
+ */
+static inline unsigned int get_nominal_index(void)
+{
+	return powernv_pstate_info.nominal;
+}
+
+static void powernv_cpufreq_throttle_check(void *data)
+{
+	struct chip *chip;
+	unsigned int cpu = smp_processor_id();
+	unsigned long pmsr;
+	int pmsr_pmax;
+	unsigned int pmsr_pmax_idx;
+
+	pmsr = get_pmspr(SPRN_PMSR);
+	chip = this_cpu_read(chip_info);
+
+	/* Check for Pmax Capping */
+	pmsr_pmax = extract_max_pstate(pmsr);
+	pmsr_pmax_idx = pstate_to_idx(pmsr_pmax);
+	if (pmsr_pmax_idx != powernv_pstate_info.max) {
+		if (chip->throttled)
+			goto next;
+		chip->throttled = true;
+		if (pmsr_pmax_idx > powernv_pstate_info.nominal) {
+			pr_warn_once("CPU %d on Chip %u has Pmax(%d) reduced below nominal frequency(%d)\n",
+				     cpu, chip->id, pmsr_pmax,
+				     idx_to_pstate(powernv_pstate_info.nominal));
+			chip->throttle_sub_turbo++;
+		} else {
+			chip->throttle_turbo++;
+		}
+		trace_powernv_throttle(chip->id,
+				      throttle_reason[chip->throttle_reason],
+				      pmsr_pmax);
+	} else if (chip->throttled) {
+		chip->throttled = false;
+		trace_powernv_throttle(chip->id,
+				      throttle_reason[chip->throttle_reason],
+				      pmsr_pmax);
+	}
+
+	/* Check if Psafe_mode_active is set in PMSR. */
+next:
+	if (pmsr & PMSR_PSAFE_ENABLE) {
+		throttled = true;
+		pr_info("Pstate set to safe frequency\n");
+	}
+
+	/* Check if SPR_EM_DISABLE is set in PMSR */
+	if (pmsr & PMSR_SPR_EM_DISABLE) {
+		throttled = true;
+		pr_info("Frequency Control disabled from OS\n");
+	}
+
+	if (throttled) {
+		pr_info("PMSR = %16lx\n", pmsr);
+		pr_warn("CPU Frequency could be throttled\n");
+	}
+}
+
+/**
+ * calc_global_pstate - Calculate global pstate
+ * @elapsed_time:		Elapsed time in milliseconds
+ * @local_pstate_idx:		New local pstate
+ * @highest_lpstate_idx:	pstate from which its ramping down
+ *
+ * Finds the appropriate global pstate based on the pstate from which its
+ * ramping down and the time elapsed in ramping down. It follows a quadratic
+ * equation which ensures that it reaches ramping down to pmin in 5sec.
+ */
+static inline int calc_global_pstate(unsigned int elapsed_time,
+				     int highest_lpstate_idx,
+				     int local_pstate_idx)
+{
+	int index_diff;
+
+	/*
+	 * Using ramp_down_percent we get the percentage of rampdown
+	 * that we are expecting to be dropping. Difference between
+	 * highest_lpstate_idx and powernv_pstate_info.min will give a absolute
+	 * number of how many pstates we will drop eventually by the end of
+	 * 5 seconds, then just scale it get the number pstates to be dropped.
+	 */
+	index_diff =  ((int)ramp_down_percent(elapsed_time) *
+			(powernv_pstate_info.min - highest_lpstate_idx)) / 100;
+
+	/* Ensure that global pstate is >= to local pstate */
+	if (highest_lpstate_idx + index_diff >= local_pstate_idx)
+		return local_pstate_idx;
+	else
+		return highest_lpstate_idx + index_diff;
+}
+
+static inline void  queue_gpstate_timer(struct global_pstate_info *gpstates)
+{
+	unsigned int timer_interval;
+
+	/*
+	 * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But
+	 * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time.
+	 * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME
+	 * seconds of ramp down time.
+	 */
+	if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL)
+	     > MAX_RAMP_DOWN_TIME)
+		timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time;
+	else
+		timer_interval = GPSTATE_TIMER_INTERVAL;
+
+	mod_timer(&gpstates->timer, jiffies + msecs_to_jiffies(timer_interval));
+}
+
+/**
+ * gpstate_timer_handler
+ *
+ * @data: pointer to cpufreq_policy on which timer was queued
+ *
+ * This handler brings down the global pstate closer to the local pstate
+ * according quadratic equation. Queues a new timer if it is still not equal
+ * to local pstate
+ */
+void gpstate_timer_handler(unsigned long data)
+{
+	struct cpufreq_policy *policy = (struct cpufreq_policy *)data;
+	struct global_pstate_info *gpstates = policy->driver_data;
+	int gpstate_idx, lpstate_idx;
+	unsigned long val;
+	unsigned int time_diff = jiffies_to_msecs(jiffies)
+					- gpstates->last_sampled_time;
+	struct powernv_smp_call_data freq_data;
+
+	if (!spin_trylock(&gpstates->gpstate_lock))
+		return;
+	/*
+	 * If the timer has migrated to the different cpu then bring
+	 * it back to one of the policy->cpus
+	 */
+	if (!cpumask_test_cpu(raw_smp_processor_id(), policy->cpus)) {
+		gpstates->timer.expires = jiffies + msecs_to_jiffies(1);
+		add_timer_on(&gpstates->timer, cpumask_first(policy->cpus));
+		spin_unlock(&gpstates->gpstate_lock);
+		return;
+	}
+
+	/*
+	 * If PMCR was last updated was using fast_swtich then
+	 * We may have wrong in gpstate->last_lpstate_idx
+	 * value. Hence, read from PMCR to get correct data.
+	 */
+	val = get_pmspr(SPRN_PMCR);
+	freq_data.gpstate_id = extract_global_pstate(val);
+	freq_data.pstate_id = extract_local_pstate(val);
+	if (freq_data.gpstate_id  == freq_data.pstate_id) {
+		reset_gpstates(policy);
+		spin_unlock(&gpstates->gpstate_lock);
+		return;
+	}
+
+	gpstates->last_sampled_time += time_diff;
+	gpstates->elapsed_time += time_diff;
+
+	if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
+		gpstate_idx = pstate_to_idx(freq_data.pstate_id);
+		lpstate_idx = gpstate_idx;
+		reset_gpstates(policy);
+		gpstates->highest_lpstate_idx = gpstate_idx;
+	} else {
+		lpstate_idx = pstate_to_idx(freq_data.pstate_id);
+		gpstate_idx = calc_global_pstate(gpstates->elapsed_time,
+						 gpstates->highest_lpstate_idx,
+						 lpstate_idx);
+	}
+	freq_data.gpstate_id = idx_to_pstate(gpstate_idx);
+	gpstates->last_gpstate_idx = gpstate_idx;
+	gpstates->last_lpstate_idx = lpstate_idx;
+	/*
+	 * If local pstate is equal to global pstate, rampdown is over
+	 * So timer is not required to be queued.
+	 */
+	if (gpstate_idx != gpstates->last_lpstate_idx)
+		queue_gpstate_timer(gpstates);
+
+	set_pstate(&freq_data);
+	spin_unlock(&gpstates->gpstate_lock);
+}
+
+/*
+ * powernv_cpufreq_target_index: Sets the frequency corresponding to
+ * the cpufreq table entry indexed by new_index on the cpus in the
+ * mask policy->cpus
+ */
+static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
+					unsigned int new_index)
+{
+	struct powernv_smp_call_data freq_data;
+	unsigned int cur_msec, gpstate_idx;
+	struct global_pstate_info *gpstates = policy->driver_data;
+
+	if (unlikely(rebooting) && new_index != get_nominal_index())
+		return 0;
+
+	if (!throttled) {
+		/* we don't want to be preempted while
+		 * checking if the CPU frequency has been throttled
+		 */
+		preempt_disable();
+		powernv_cpufreq_throttle_check(NULL);
+		preempt_enable();
+	}
+
+	cur_msec = jiffies_to_msecs(get_jiffies_64());
+
+	spin_lock(&gpstates->gpstate_lock);
+	freq_data.pstate_id = idx_to_pstate(new_index);
+
+	if (!gpstates->last_sampled_time) {
+		gpstate_idx = new_index;
+		gpstates->highest_lpstate_idx = new_index;
+		goto gpstates_done;
+	}
+
+	if (gpstates->last_gpstate_idx < new_index) {
+		gpstates->elapsed_time += cur_msec -
+						 gpstates->last_sampled_time;
+
+		/*
+		 * If its has been ramping down for more than MAX_RAMP_DOWN_TIME
+		 * we should be resetting all global pstate related data. Set it
+		 * equal to local pstate to start fresh.
+		 */
+		if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
+			reset_gpstates(policy);
+			gpstates->highest_lpstate_idx = new_index;
+			gpstate_idx = new_index;
+		} else {
+		/* Elaspsed_time is less than 5 seconds, continue to rampdown */
+			gpstate_idx = calc_global_pstate(gpstates->elapsed_time,
+							 gpstates->highest_lpstate_idx,
+							 new_index);
+		}
+	} else {
+		reset_gpstates(policy);
+		gpstates->highest_lpstate_idx = new_index;
+		gpstate_idx = new_index;
+	}
+
+	/*
+	 * If local pstate is equal to global pstate, rampdown is over
+	 * So timer is not required to be queued.
+	 */
+	if (gpstate_idx != new_index)
+		queue_gpstate_timer(gpstates);
+	else
+		del_timer_sync(&gpstates->timer);
+
+gpstates_done:
+	freq_data.gpstate_id = idx_to_pstate(gpstate_idx);
+	gpstates->last_sampled_time = cur_msec;
+	gpstates->last_gpstate_idx = gpstate_idx;
+	gpstates->last_lpstate_idx = new_index;
+
+	spin_unlock(&gpstates->gpstate_lock);
+
+	/*
+	 * Use smp_call_function to send IPI and execute the
+	 * mtspr on target CPU.  We could do that without IPI
+	 * if current CPU is within policy->cpus (core)
+	 */
+	smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
+	return 0;
+}
+
+static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	int base, i, ret;
+	struct kernfs_node *kn;
+	struct global_pstate_info *gpstates;
+
+	base = cpu_first_thread_sibling(policy->cpu);
+
+	for (i = 0; i < threads_per_core; i++)
+		cpumask_set_cpu(base + i, policy->cpus);
+
+	kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name);
+	if (!kn) {
+		int ret;
+
+		ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp);
+		if (ret) {
+			pr_info("Failed to create throttle stats directory for cpu %d\n",
+				policy->cpu);
+			return ret;
+		}
+	} else {
+		kernfs_put(kn);
+	}
+
+	gpstates =  kzalloc(sizeof(*gpstates), GFP_KERNEL);
+	if (!gpstates)
+		return -ENOMEM;
+
+	policy->driver_data = gpstates;
+
+	/* initialize timer */
+	init_timer_pinned_deferrable(&gpstates->timer);
+	gpstates->timer.data = (unsigned long)policy;
+	gpstates->timer.function = gpstate_timer_handler;
+	gpstates->timer.expires = jiffies +
+				msecs_to_jiffies(GPSTATE_TIMER_INTERVAL);
+	spin_lock_init(&gpstates->gpstate_lock);
+	ret = cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+	if (ret < 0) {
+		kfree(policy->driver_data);
+		return ret;
+	}
+
+	policy->fast_switch_possible = true;
+	return ret;
+}
+
+static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	/* timer is deleted in cpufreq_cpu_stop() */
+	kfree(policy->driver_data);
+
+	return 0;
+}
+
+static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
+				unsigned long action, void *unused)
+{
+	int cpu;
+	struct cpufreq_policy cpu_policy;
+
+	rebooting = true;
+	for_each_online_cpu(cpu) {
+		cpufreq_get_policy(&cpu_policy, cpu);
+		powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block powernv_cpufreq_reboot_nb = {
+	.notifier_call = powernv_cpufreq_reboot_notifier,
+};
+
+void powernv_cpufreq_work_fn(struct work_struct *work)
+{
+	struct chip *chip = container_of(work, struct chip, throttle);
+	struct cpufreq_policy *policy;
+	unsigned int cpu;
+	cpumask_t mask;
+
+	get_online_cpus();
+	cpumask_and(&mask, &chip->mask, cpu_online_mask);
+	smp_call_function_any(&mask,
+			      powernv_cpufreq_throttle_check, NULL, 0);
+
+	if (!chip->restore)
+		goto out;
+
+	chip->restore = false;
+	for_each_cpu(cpu, &mask) {
+		int index;
+
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			continue;
+		index = cpufreq_table_find_index_c(policy, policy->cur);
+		powernv_cpufreq_target_index(policy, index);
+		cpumask_andnot(&mask, &mask, policy->cpus);
+		cpufreq_cpu_put(policy);
+	}
+out:
+	put_online_cpus();
+}
+
+static int powernv_cpufreq_occ_msg(struct notifier_block *nb,
+				   unsigned long msg_type, void *_msg)
+{
+	struct opal_msg *msg = _msg;
+	struct opal_occ_msg omsg;
+	int i;
+
+	if (msg_type != OPAL_MSG_OCC)
+		return 0;
+
+	omsg.type = be64_to_cpu(msg->params[0]);
+
+	switch (omsg.type) {
+	case OCC_RESET:
+		occ_reset = true;
+		pr_info("OCC (On Chip Controller - enforces hard thermal/power limits) Resetting\n");
+		/*
+		 * powernv_cpufreq_throttle_check() is called in
+		 * target() callback which can detect the throttle state
+		 * for governors like ondemand.
+		 * But static governors will not call target() often thus
+		 * report throttling here.
+		 */
+		if (!throttled) {
+			throttled = true;
+			pr_warn("CPU frequency is throttled for duration\n");
+		}
+
+		break;
+	case OCC_LOAD:
+		pr_info("OCC Loading, CPU frequency is throttled until OCC is started\n");
+		break;
+	case OCC_THROTTLE:
+		omsg.chip = be64_to_cpu(msg->params[1]);
+		omsg.throttle_status = be64_to_cpu(msg->params[2]);
+
+		if (occ_reset) {
+			occ_reset = false;
+			throttled = false;
+			pr_info("OCC Active, CPU frequency is no longer throttled\n");
+
+			for (i = 0; i < nr_chips; i++) {
+				chips[i].restore = true;
+				schedule_work(&chips[i].throttle);
+			}
+
+			return 0;
+		}
+
+		for (i = 0; i < nr_chips; i++)
+			if (chips[i].id == omsg.chip)
+				break;
+
+		if (omsg.throttle_status >= 0 &&
+		    omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS) {
+			chips[i].throttle_reason = omsg.throttle_status;
+			chips[i].reason[omsg.throttle_status]++;
+		}
+
+		if (!omsg.throttle_status)
+			chips[i].restore = true;
+
+		schedule_work(&chips[i].throttle);
+	}
+	return 0;
+}
+
+static struct notifier_block powernv_cpufreq_opal_nb = {
+	.notifier_call	= powernv_cpufreq_occ_msg,
+	.next		= NULL,
+	.priority	= 0,
+};
+
+static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
+{
+	struct powernv_smp_call_data freq_data;
+	struct global_pstate_info *gpstates = policy->driver_data;
+
+	freq_data.pstate_id = idx_to_pstate(powernv_pstate_info.min);
+	freq_data.gpstate_id = idx_to_pstate(powernv_pstate_info.min);
+	smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
+	del_timer_sync(&gpstates->timer);
+}
+
+static unsigned int powernv_fast_switch(struct cpufreq_policy *policy,
+					unsigned int target_freq)
+{
+	int index;
+	struct powernv_smp_call_data freq_data;
+
+	index = cpufreq_table_find_index_dl(policy, target_freq);
+	freq_data.pstate_id = powernv_freqs[index].driver_data;
+	freq_data.gpstate_id = powernv_freqs[index].driver_data;
+	set_pstate(&freq_data);
+
+	return powernv_freqs[index].frequency;
+}
+
+static struct cpufreq_driver powernv_cpufreq_driver = {
+	.name		= "powernv-cpufreq",
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= powernv_cpufreq_cpu_init,
+	.exit		= powernv_cpufreq_cpu_exit,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= powernv_cpufreq_target_index,
+	.fast_switch	= powernv_fast_switch,
+	.get		= powernv_cpufreq_get,
+	.stop_cpu	= powernv_cpufreq_stop_cpu,
+	.attr		= powernv_cpu_freq_attr,
+};
+
+static int init_chip_info(void)
+{
+	unsigned int *chip;
+	unsigned int cpu, i;
+	unsigned int prev_chip_id = UINT_MAX;
+	int ret = 0;
+
+	chip = kcalloc(num_possible_cpus(), sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		unsigned int id = cpu_to_chip_id(cpu);
+
+		if (prev_chip_id != id) {
+			prev_chip_id = id;
+			chip[nr_chips++] = id;
+		}
+	}
+
+	chips = kcalloc(nr_chips, sizeof(struct chip), GFP_KERNEL);
+	if (!chips) {
+		ret = -ENOMEM;
+		goto free_and_return;
+	}
+
+	for (i = 0; i < nr_chips; i++) {
+		chips[i].id = chip[i];
+		cpumask_copy(&chips[i].mask, cpumask_of_node(chip[i]));
+		INIT_WORK(&chips[i].throttle, powernv_cpufreq_work_fn);
+		for_each_cpu(cpu, &chips[i].mask)
+			per_cpu(chip_info, cpu) =  &chips[i];
+	}
+
+free_and_return:
+	kfree(chip);
+	return ret;
+}
+
+static inline void clean_chip_info(void)
+{
+	int i;
+
+	/* flush any pending work items */
+	if (chips)
+		for (i = 0; i < nr_chips; i++)
+			cancel_work_sync(&chips[i].throttle);
+	kfree(chips);
+}
+
+static inline void unregister_all_notifiers(void)
+{
+	opal_message_notifier_unregister(OPAL_MSG_OCC,
+					 &powernv_cpufreq_opal_nb);
+	unregister_reboot_notifier(&powernv_cpufreq_reboot_nb);
+}
+
+static int __init powernv_cpufreq_init(void)
+{
+	int rc = 0;
+
+	/* Don't probe on pseries (guest) platforms */
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	/* Discover pstates from device tree and init */
+	rc = init_powernv_pstates();
+	if (rc)
+		goto out;
+
+	/* Populate chip info */
+	rc = init_chip_info();
+	if (rc)
+		goto out;
+
+	register_reboot_notifier(&powernv_cpufreq_reboot_nb);
+	opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb);
+
+	if (powernv_pstate_info.wof_enabled)
+		powernv_cpufreq_driver.boost_enabled = true;
+	else
+		powernv_cpu_freq_attr[SCALING_BOOST_FREQS_ATTR_INDEX] = NULL;
+
+	rc = cpufreq_register_driver(&powernv_cpufreq_driver);
+	if (rc) {
+		pr_info("Failed to register the cpufreq driver (%d)\n", rc);
+		goto cleanup_notifiers;
+	}
+
+	if (powernv_pstate_info.wof_enabled)
+		cpufreq_enable_boost_support();
+
+	return 0;
+cleanup_notifiers:
+	unregister_all_notifiers();
+	clean_chip_info();
+out:
+	pr_info("Platform driver disabled. System does not support PState control\n");
+	return rc;
+}
+module_init(powernv_cpufreq_init);
+
+static void __exit powernv_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&powernv_cpufreq_driver);
+	unregister_all_notifiers();
+	clean_chip_info();
+}
+module_exit(powernv_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.c
new file mode 100644
index 0000000..2eaeebc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -0,0 +1,171 @@
+/*
+ * cpufreq driver for the cell processor
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/cell-regs.h>
+
+#include "ppc_cbe_cpufreq.h"
+
+/* the CBE supports an 8 step frequency scaling */
+static struct cpufreq_frequency_table cbe_freqs[] = {
+	{0, 1,	0},
+	{0, 2,	0},
+	{0, 3,	0},
+	{0, 4,	0},
+	{0, 5,	0},
+	{0, 6,	0},
+	{0, 8,	0},
+	{0, 10,	0},
+	{0, 0,	CPUFREQ_TABLE_END},
+};
+
+/*
+ * hardware specific functions
+ */
+
+static int set_pmode(unsigned int cpu, unsigned int slow_mode)
+{
+	int rc;
+
+	if (cbe_cpufreq_has_pmi)
+		rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
+	else
+		rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
+
+	pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
+
+	return rc;
+}
+
+/*
+ * cpufreq functions
+ */
+
+static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pos;
+	const u32 *max_freqp;
+	u32 max_freq;
+	int cur_pmode;
+	struct device_node *cpu;
+
+	cpu = of_get_cpu_node(policy->cpu, NULL);
+
+	if (!cpu)
+		return -ENODEV;
+
+	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
+
+	/*
+	 * Let's check we can actually get to the CELL regs
+	 */
+	if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
+	    !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
+		pr_info("invalid CBE regs pointers for cpufreq\n");
+		of_node_put(cpu);
+		return -EINVAL;
+	}
+
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+
+	of_node_put(cpu);
+
+	if (!max_freqp)
+		return -EINVAL;
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
+
+	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
+	pr_debug("initializing frequency table\n");
+
+	/* initialize frequency table */
+	cpufreq_for_each_entry(pos, cbe_freqs) {
+		pos->frequency = max_freq / pos->driver_data;
+		pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
+	}
+
+	/* if DEBUG is enabled set_pmode() measures the latency
+	 * of a transition */
+	policy->cpuinfo.transition_latency = 25000;
+
+	cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
+	pr_debug("current pmode is at %d\n",cur_pmode);
+
+	policy->cur = cbe_freqs[cur_pmode].frequency;
+
+#ifdef CONFIG_SMP
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
+#endif
+
+	/* this ensures that policy->cpuinfo_min
+	 * and policy->cpuinfo_max are set correctly */
+	return cpufreq_table_validate_and_show(policy, cbe_freqs);
+}
+
+static int cbe_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int cbe_pmode_new)
+{
+	pr_debug("setting frequency for cpu %d to %d kHz, " \
+		 "1/%d of max frequency\n",
+		 policy->cpu,
+		 cbe_freqs[cbe_pmode_new].frequency,
+		 cbe_freqs[cbe_pmode_new].driver_data);
+
+	return set_pmode(policy->cpu, cbe_pmode_new);
+}
+
+static struct cpufreq_driver cbe_cpufreq_driver = {
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= cbe_cpufreq_target,
+	.init		= cbe_cpufreq_cpu_init,
+	.name		= "cbe-cpufreq",
+	.flags		= CPUFREQ_CONST_LOOPS,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init cbe_cpufreq_init(void)
+{
+	if (!machine_is(cell))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&cbe_cpufreq_driver);
+}
+
+static void __exit cbe_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&cbe_cpufreq_driver);
+}
+
+module_init(cbe_cpufreq_init);
+module_exit(cbe_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.h b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.h
new file mode 100644
index 0000000..9d97351
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ppc_cbe_cpufreq.h
+ *
+ * This file contains the definitions used by the cbe_cpufreq driver.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/types.h>
+
+int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode);
+int cbe_cpufreq_get_pmode(int cpu);
+
+int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
+
+#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
+extern bool cbe_cpufreq_has_pmi;
+#else
+#define cbe_cpufreq_has_pmi (0)
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
new file mode 100644
index 0000000..84d2f2c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
@@ -0,0 +1,115 @@
+/*
+ * pervasive backend for the cbe_cpufreq driver
+ *
+ * This driver makes use of the pervasive unit to
+ * engage the desired frequency.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <asm/machdep.h>
+#include <asm/hw_irq.h>
+#include <asm/cell-regs.h>
+
+#include "ppc_cbe_cpufreq.h"
+
+/* to write to MIC register */
+static u64 MIC_Slow_Fast_Timer_table[] = {
+	[0 ... 7] = 0x007fc00000000000ull,
+};
+
+/* more values for the MIC */
+static u64 MIC_Slow_Next_Timer_table[] = {
+	0x0000240000000000ull,
+	0x0000268000000000ull,
+	0x000029C000000000ull,
+	0x00002D0000000000ull,
+	0x0000300000000000ull,
+	0x0000334000000000ull,
+	0x000039C000000000ull,
+	0x00003FC000000000ull,
+};
+
+
+int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode)
+{
+	struct cbe_pmd_regs __iomem *pmd_regs;
+	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
+	unsigned long flags;
+	u64 value;
+#ifdef DEBUG
+	long time;
+#endif
+
+	local_irq_save(flags);
+
+	mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu);
+	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
+
+#ifdef DEBUG
+	time = jiffies;
+#endif
+
+	out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]);
+	out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]);
+
+	out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]);
+	out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]);
+
+	value = in_be64(&pmd_regs->pmcr);
+	/* set bits to zero */
+	value &= 0xFFFFFFFFFFFFFFF8ull;
+	/* set bits to next pmode */
+	value |= pmode;
+
+	out_be64(&pmd_regs->pmcr, value);
+
+#ifdef DEBUG
+	/* wait until new pmode appears in status register */
+	value = in_be64(&pmd_regs->pmsr) & 0x07;
+	while (value != pmode) {
+		cpu_relax();
+		value = in_be64(&pmd_regs->pmsr) & 0x07;
+	}
+
+	time = jiffies  - time;
+	time = jiffies_to_msecs(time);
+	pr_debug("had to wait %lu ms for a transition using " \
+		 "pervasive unit\n", time);
+#endif
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+int cbe_cpufreq_get_pmode(int cpu)
+{
+	int ret;
+	struct cbe_pmd_regs __iomem *pmd_regs;
+
+	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
+	ret = in_be64(&pmd_regs->pmsr) & 0x07;
+
+	return ret;
+}
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
new file mode 100644
index 0000000..eeaa922
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -0,0 +1,141 @@
+/*
+ * pmi backend for the cbe_cpufreq driver
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/processor.h>
+#include <asm/prom.h>
+#include <asm/pmi.h>
+#include <asm/cell-regs.h>
+
+#ifdef DEBUG
+#include <asm/time.h>
+#endif
+
+#include "ppc_cbe_cpufreq.h"
+
+static u8 pmi_slow_mode_limit[MAX_CBE];
+
+bool cbe_cpufreq_has_pmi = false;
+EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
+
+/*
+ * hardware specific functions
+ */
+
+int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode)
+{
+	int ret;
+	pmi_message_t pmi_msg;
+#ifdef DEBUG
+	long time;
+#endif
+	pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
+	pmi_msg.data1 =	cbe_cpu_to_node(cpu);
+	pmi_msg.data2 = pmode;
+
+#ifdef DEBUG
+	time = jiffies;
+#endif
+	pmi_send_message(pmi_msg);
+
+#ifdef DEBUG
+	time = jiffies  - time;
+	time = jiffies_to_msecs(time);
+	pr_debug("had to wait %lu ms for a transition using " \
+		 "PMI\n", time);
+#endif
+	ret = pmi_msg.data2;
+	pr_debug("PMI returned slow mode %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
+
+
+static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
+{
+	u8 node, slow_mode;
+
+	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
+
+	node = pmi_msg.data1;
+	slow_mode = pmi_msg.data2;
+
+	pmi_slow_mode_limit[node] = slow_mode;
+
+	pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
+}
+
+static int pmi_notifier(struct notifier_block *nb,
+				       unsigned long event, void *data)
+{
+	struct cpufreq_policy *policy = data;
+	struct cpufreq_frequency_table *cbe_freqs = policy->freq_table;
+	u8 node;
+
+	/* Should this really be called for CPUFREQ_ADJUST and CPUFREQ_NOTIFY
+	 * policy events?)
+	 */
+	node = cbe_cpu_to_node(policy->cpu);
+
+	pr_debug("got notified, event=%lu, node=%u\n", event, node);
+
+	if (pmi_slow_mode_limit[node] != 0) {
+		pr_debug("limiting node %d to slow mode %d\n",
+			 node, pmi_slow_mode_limit[node]);
+
+		cpufreq_verify_within_limits(policy, 0,
+
+			cbe_freqs[pmi_slow_mode_limit[node]].frequency);
+	}
+
+	return 0;
+}
+
+static struct notifier_block pmi_notifier_block = {
+	.notifier_call = pmi_notifier,
+};
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_FREQ_CHANGE,
+	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
+};
+
+
+
+static int __init cbe_cpufreq_pmi_init(void)
+{
+	cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0;
+
+	if (!cbe_cpufreq_has_pmi)
+		return -ENODEV;
+
+	cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
+
+	return 0;
+}
+device_initcall(cbe_cpufreq_pmi_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pxa2xx-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pxa2xx-cpufreq.c
new file mode 100644
index 0000000..a24e9f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -0,0 +1,452 @@
+/*
+ *  Copyright (C) 2002,2003 Intrinsyc Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * History:
+ *   31-Jul-2002 : Initial version [FB]
+ *   29-Jan-2003 : added PXA255 support [FB]
+ *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
+ *
+ * Note:
+ *   This driver may change the memory bus clock rate, but will not do any
+ *   platform specific access timing changes... for example if you have flash
+ *   memory connected to CS0, you will need to register a platform specific
+ *   notifier which will adjust the memory access strobes to maintain a
+ *   minimum strobe width.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/io.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
+
+#ifdef DEBUG
+static unsigned int freq_debug;
+module_param(freq_debug, uint, 0);
+MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
+#else
+#define freq_debug  0
+#endif
+
+static struct regulator *vcc_core;
+
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
+struct pxa_freqs {
+	unsigned int khz;
+	unsigned int membus;
+	unsigned int cccr;
+	unsigned int div2;
+	unsigned int cclkcfg;
+	int vmin;
+	int vmax;
+};
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF	64	/* standard 64ms SDRAM */
+static unsigned int sdram_rows;
+
+#define CCLKCFG_TURBO		0x1
+#define CCLKCFG_FCS		0x2
+#define CCLKCFG_HALFTURBO	0x4
+#define CCLKCFG_FASTBUS		0x8
+#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK		0xFFF
+
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
+/*
+ * PXA255 definitions
+ */
+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
+
+static const struct pxa_freqs pxa255_run_freqs[] =
+{
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
+};
+
+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
+static const struct pxa_freqs pxa255_turbo_freqs[] =
+{
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
+};
+
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+static unsigned int pxa255_turbo_table;
+module_param(pxa255_turbo_table, uint, 0);
+MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency	= 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16	  oscillator to run mode ratio
+ * 2N = 6	  2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1	  Fast bus mode
+ * HT = 0	  Half-Turbo mode
+ * T = 1	  Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+  (CCLKCFG_FCS | \
+   ((B)  ? CCLKCFG_FASTBUS : 0) | \
+   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+   ((T)  ? CCLKCFG_TURBO : 0))
+
+static struct pxa_freqs pxa27x_freqs[] = {
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
+};
+
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
+
+extern unsigned get_clk_frequency_khz(int info);
+
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
+{
+	int ret = 0;
+	int vmin, vmax;
+
+	if (!cpu_is_pxa27x())
+		return 0;
+
+	vmin = pxa_freq->vmin;
+	vmax = pxa_freq->vmax;
+	if ((vmin == -1) || (vmax == -1))
+		return 0;
+
+	ret = regulator_set_voltage(vcc_core, vmin, vmax);
+	if (ret)
+		pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
+	return ret;
+}
+
+static void pxa_cpufreq_init_voltages(void)
+{
+	vcc_core = regulator_get(NULL, "vcc_core");
+	if (IS_ERR(vcc_core)) {
+		pr_info("Didn't find vcc_core regulator\n");
+		vcc_core = NULL;
+	} else {
+		pr_info("Found vcc_core regulator\n");
+	}
+}
+#else
+static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
+{
+	return 0;
+}
+
+static void pxa_cpufreq_init_voltages(void) { }
+#endif
+
+static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
+			     const struct pxa_freqs **pxa_freqs)
+{
+	if (cpu_is_pxa25x()) {
+		if (!pxa255_turbo_table) {
+			*pxa_freqs = pxa255_run_freqs;
+			*freq_table = pxa255_run_freq_table;
+		} else {
+			*pxa_freqs = pxa255_turbo_freqs;
+			*freq_table = pxa255_turbo_freq_table;
+		}
+	} else if (cpu_is_pxa27x()) {
+		*pxa_freqs = pxa27x_freqs;
+		*freq_table = pxa27x_freq_table;
+	} else {
+		BUG();
+	}
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+	if (!pxa27x_maxfreq) {
+		pxa27x_maxfreq = 416000;
+		pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+			pxa27x_maxfreq);
+	} else {
+		pxa27x_maxfreq *= 1000;
+	}
+}
+
+static void init_sdram_rows(void)
+{
+	uint32_t mdcnfg = __raw_readl(MDCNFG);
+	unsigned int drac2 = 0, drac0 = 0;
+
+	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+		drac2 = MDCNFG_DRAC2(mdcnfg);
+
+	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+		drac0 = MDCNFG_DRAC0(mdcnfg);
+
+	sdram_rows = 1 << (11 + max(drac0, drac2));
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
+
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
+}
+
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
+static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
+{
+	struct cpufreq_frequency_table *pxa_freqs_table;
+	const struct pxa_freqs *pxa_freq_settings;
+	unsigned long flags;
+	unsigned int new_freq_cpu, new_freq_mem;
+	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	int ret = 0;
+
+	/* Get the current policy */
+	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
+
+	new_freq_cpu = pxa_freq_settings[idx].khz;
+	new_freq_mem = pxa_freq_settings[idx].membus;
+
+	if (freq_debug)
+		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
+			 new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ?
+			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
+
+	if (vcc_core && new_freq_cpu > policy->cur) {
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+		if (ret)
+			return ret;
+	}
+
+	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
+	 * we need to preset the smaller DRI before the change.	 If we're
+	 * speeding up we need to set the larger DRI value after the change.
+	 */
+	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+		preset_mdrefr |= mdrefr_dri(new_freq_mem);
+	}
+	postset_mdrefr =
+		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
+
+	/* If we're dividing the memory clock by two for the SDRAM clock, this
+	 * must be set prior to the change.  Clearing the divide must be done
+	 * after the change.
+	 */
+	if (pxa_freq_settings[idx].div2) {
+		preset_mdrefr  |= MDREFR_DB2_MASK;
+		postset_mdrefr |= MDREFR_DB2_MASK;
+	} else {
+		postset_mdrefr &= ~MDREFR_DB2_MASK;
+	}
+
+	local_irq_save(flags);
+
+	/* Set new the CCCR and prepare CCLKCFG */
+	writel(pxa_freq_settings[idx].cccr, CCCR);
+	cclkcfg = pxa_freq_settings[idx].cclkcfg;
+
+	asm volatile("							\n\
+		ldr	r4, [%1]		/* load MDREFR */	\n\
+		b	2f						\n\
+		.align	5						\n\
+1:									\n\
+		str	%3, [%1]		/* preset the MDREFR */	\n\
+		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
+		str	%4, [%1]		/* postset the MDREFR */ \n\
+									\n\
+		b	3f						\n\
+2:		b	1b						\n\
+3:		nop							\n\
+	  "
+		     : "=&r" (unused)
+		     : "r" (MDREFR), "r" (cclkcfg),
+		       "r" (preset_mdrefr), "r" (postset_mdrefr)
+		     : "r4", "r5");
+	local_irq_restore(flags);
+
+	/*
+	 * Even if voltage setting fails, we don't report it, as the frequency
+	 * change succeeded. The voltage reduction is not a critical failure,
+	 * only power savings will suffer from this.
+	 *
+	 * Note: if the voltage change fails, and a return value is returned, a
+	 * bug is triggered (seems a deadlock). Should anybody find out where,
+	 * the "return 0" should become a "return ret".
+	 */
+	if (vcc_core && new_freq_cpu < policy->cur)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
+	return 0;
+}
+
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int i;
+	unsigned int freq;
+	struct cpufreq_frequency_table *pxa255_freq_table;
+	const struct pxa_freqs *pxa255_freqs;
+
+	/* try to guess pxa27x cpu */
+	if (cpu_is_pxa27x())
+		pxa27x_guess_max_freq();
+
+	pxa_cpufreq_init_voltages();
+
+	init_sdram_rows();
+
+	/* set default policy and cpuinfo */
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+
+	/* Generate pxa25x the run cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
+		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
+		pxa255_run_freq_table[i].driver_data = i;
+	}
+	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+		pxa255_turbo_freq_table[i].frequency =
+			pxa255_turbo_freqs[i].khz;
+		pxa255_turbo_freq_table[i].driver_data = i;
+	}
+	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	pxa255_turbo_table = !!pxa255_turbo_table;
+
+	/* Generate the pxa27x cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+		freq = pxa27x_freqs[i].khz;
+		if (freq > pxa27x_maxfreq)
+			break;
+		pxa27x_freq_table[i].frequency = freq;
+		pxa27x_freq_table[i].driver_data = i;
+	}
+	pxa27x_freq_table[i].driver_data = i;
+	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/*
+	 * Set the policy's minimum and maximum frequencies from the tables
+	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
+	 */
+	if (cpu_is_pxa25x()) {
+		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
+		pr_info("using %s frequency table\n",
+			pxa255_turbo_table ? "turbo" : "run");
+
+		cpufreq_table_validate_and_show(policy, pxa255_freq_table);
+	}
+	else if (cpu_is_pxa27x()) {
+		cpufreq_table_validate_and_show(policy, pxa27x_freq_table);
+	}
+
+	pr_info("frequency change support initialized\n");
+
+	return 0;
+}
+
+static struct cpufreq_driver pxa_cpufreq_driver = {
+	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = pxa_set_target,
+	.init	= pxa_cpufreq_init,
+	.get	= pxa_cpufreq_get,
+	.name	= "PXA2xx",
+};
+
+static int __init pxa_cpu_init(void)
+{
+	int ret = -ENODEV;
+	if (cpu_is_pxa25x() || cpu_is_pxa27x())
+		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
+	return ret;
+}
+
+static void __exit pxa_cpu_exit(void)
+{
+	cpufreq_unregister_driver(&pxa_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
+MODULE_LICENSE("GPL");
+module_init(pxa_cpu_init);
+module_exit(pxa_cpu_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/pxa3xx-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/pxa3xx-cpufreq.c
new file mode 100644
index 0000000..a012759
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/generic.h>
+#include <mach/pxa3xx-regs.h>
+
+#define HSS_104M	(0)
+#define HSS_156M	(1)
+#define HSS_208M	(2)
+#define HSS_312M	(3)
+
+#define SMCFS_78M	(0)
+#define SMCFS_104M	(2)
+#define SMCFS_208M	(5)
+
+#define SFLFS_104M	(0)
+#define SFLFS_156M	(1)
+#define SFLFS_208M	(2)
+#define SFLFS_312M	(3)
+
+#define XSPCLK_156M	(0)
+#define XSPCLK_NONE	(3)
+
+#define DMCFS_26M	(0)
+#define DMCFS_260M	(3)
+
+struct pxa3xx_freq_info {
+	unsigned int cpufreq_mhz;
+	unsigned int core_xl : 5;
+	unsigned int core_xn : 3;
+	unsigned int hss : 2;
+	unsigned int dmcfs : 2;
+	unsigned int smcfs : 3;
+	unsigned int sflfs : 2;
+	unsigned int df_clkdiv : 3;
+
+	int	vcc_core;	/* in mV */
+	int	vcc_sram;	/* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{									\
+	.cpufreq_mhz	= cpufreq,					\
+	.core_xl	= _xl,						\
+	.core_xn	= _xn,						\
+	.hss		= HSS_##_hss##M,				\
+	.dmcfs		= DMCFS_##_dmc##M,				\
+	.smcfs		= SMCFS_##_smc##M,				\
+	.sflfs		= SFLFS_##_sfl##M,				\
+	.df_clkdiv	= _dfi,						\
+	.vcc_core	= vcore,					\
+	.vcc_sram	= vsram,					\
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+			     struct pxa3xx_freq_info *freqs, int num)
+{
+	struct cpufreq_frequency_table *table;
+	int i;
+
+	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+	if (table == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		table[i].driver_data = i;
+		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+	}
+	table[num].driver_data = i;
+	table[num].frequency = CPUFREQ_TABLE_END;
+
+	pxa3xx_freqs = freqs;
+	pxa3xx_freqs_num = num;
+	pxa3xx_freqs_table = table;
+
+	return cpufreq_table_validate_and_show(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+	uint32_t accr = ACCR;
+	uint32_t xclkcfg;
+
+	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+	/* No clock until core PLL is re-locked */
+	accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
+
+	ACCR = accr;
+	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask;
+	uint32_t accr = ACCR;
+
+	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+		ACCR_DMCFS_MASK;
+
+	accr &= ~mask;
+	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+	ACCR = accr;
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+	return pxa3xx_get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index)
+{
+	struct pxa3xx_freq_info *next;
+	unsigned long flags;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	next = &pxa3xx_freqs[index];
+
+	local_irq_save(flags);
+	__update_core_freq(next);
+	__update_bus_freq(next);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret = -EINVAL;
+
+	/* set default policy and cpuinfo */
+	policy->min = policy->cpuinfo.min_freq = 104000;
+	policy->max = policy->cpuinfo.max_freq =
+		(cpu_is_pxa320()) ? 806000 : 624000;
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		ret = setup_freqs_table(policy, pxa300_freqs,
+					ARRAY_SIZE(pxa300_freqs));
+
+	if (cpu_is_pxa320())
+		ret = setup_freqs_table(policy, pxa320_freqs,
+					ARRAY_SIZE(pxa320_freqs));
+
+	if (ret) {
+		pr_err("failed to setup frequency table\n");
+		return ret;
+	}
+
+	pr_info("CPUFREQ support for PXA3xx initialized\n");
+	return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= pxa3xx_cpufreq_set,
+	.init		= pxa3xx_cpufreq_init,
+	.get		= pxa3xx_cpufreq_get,
+	.name		= "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+	if (cpu_is_pxa3xx())
+		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+	return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/qoriq-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/qoriq-cpufreq.c
new file mode 100644
index 0000000..4ada55b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/qoriq-cpufreq.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * CPU Frequency Scaling driver for Freescale QorIQ SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+
+/**
+ * struct cpu_data
+ * @pclk: the parent clock of cpu
+ * @table: frequency table
+ */
+struct cpu_data {
+	struct clk **pclk;
+	struct cpufreq_frequency_table *table;
+	struct thermal_cooling_device *cdev;
+};
+
+/*
+ * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
+ * matched a more generic compatible.
+ */
+#define SOC_BLACKLIST		1
+
+/**
+ * struct soc_data - SoC specific data
+ * @flags: SOC_xxx
+ */
+struct soc_data {
+	u32 flags;
+};
+
+static u32 get_bus_freq(void)
+{
+	struct device_node *soc;
+	u32 sysfreq;
+	struct clk *pltclk;
+	int ret;
+
+	/* get platform freq by searching bus-frequency property */
+	soc = of_find_node_by_type(NULL, "soc");
+	if (soc) {
+		ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
+		of_node_put(soc);
+		if (!ret)
+			return sysfreq;
+	}
+
+	/* get platform freq by its clock name */
+	pltclk = clk_get(NULL, "cg-pll0-div1");
+	if (IS_ERR(pltclk)) {
+		pr_err("%s: can't get bus frequency %ld\n",
+		       __func__, PTR_ERR(pltclk));
+		return PTR_ERR(pltclk);
+	}
+
+	return clk_get_rate(pltclk);
+}
+
+static struct clk *cpu_to_clk(int cpu)
+{
+	struct device_node *np;
+	struct clk *clk;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		return NULL;
+
+	clk = of_clk_get(np, 0);
+	of_node_put(np);
+	return clk;
+}
+
+/* traverse cpu nodes to get cpu mask of sharing clock wire */
+static void set_affected_cpus(struct cpufreq_policy *policy)
+{
+	struct cpumask *dstp = policy->cpus;
+	struct clk *clk;
+	int i;
+
+	for_each_present_cpu(i) {
+		clk = cpu_to_clk(i);
+		if (IS_ERR(clk)) {
+			pr_err("%s: no clock for cpu %d\n", __func__, i);
+			continue;
+		}
+
+		if (clk_is_match(policy->clk, clk))
+			cpumask_set_cpu(i, dstp);
+	}
+}
+
+/* reduce the duplicated frequencies in frequency table */
+static void freq_table_redup(struct cpufreq_frequency_table *freq_table,
+		int count)
+{
+	int i, j;
+
+	for (i = 1; i < count; i++) {
+		for (j = 0; j < i; j++) {
+			if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID ||
+					freq_table[j].frequency !=
+					freq_table[i].frequency)
+				continue;
+
+			freq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			break;
+		}
+	}
+}
+
+/* sort the frequencies in frequency table in descenting order */
+static void freq_table_sort(struct cpufreq_frequency_table *freq_table,
+		int count)
+{
+	int i, j, ind;
+	unsigned int freq, max_freq;
+	struct cpufreq_frequency_table table;
+
+	for (i = 0; i < count - 1; i++) {
+		max_freq = freq_table[i].frequency;
+		ind = i;
+		for (j = i + 1; j < count; j++) {
+			freq = freq_table[j].frequency;
+			if (freq == CPUFREQ_ENTRY_INVALID ||
+					freq <= max_freq)
+				continue;
+			ind = j;
+			max_freq = freq;
+		}
+
+		if (ind != i) {
+			/* exchange the frequencies */
+			table.driver_data = freq_table[i].driver_data;
+			table.frequency = freq_table[i].frequency;
+			freq_table[i].driver_data = freq_table[ind].driver_data;
+			freq_table[i].frequency = freq_table[ind].frequency;
+			freq_table[ind].driver_data = table.driver_data;
+			freq_table[ind].frequency = table.frequency;
+		}
+	}
+}
+
+static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct device_node *np;
+	int i, count, ret;
+	u32 freq;
+	struct clk *clk;
+	const struct clk_hw *hwclk;
+	struct cpufreq_frequency_table *table;
+	struct cpu_data *data;
+	unsigned int cpu = policy->cpu;
+	u64 u64temp;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto err_np;
+
+	policy->clk = of_clk_get(np, 0);
+	if (IS_ERR(policy->clk)) {
+		pr_err("%s: no clock information\n", __func__);
+		goto err_nomem2;
+	}
+
+	hwclk = __clk_get_hw(policy->clk);
+	count = clk_hw_get_num_parents(hwclk);
+
+	data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
+	if (!data->pclk) {
+		pr_err("%s: no memory\n", __func__);
+		goto err_nomem2;
+	}
+
+	table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
+	if (!table) {
+		pr_err("%s: no memory\n", __func__);
+		goto err_pclk;
+	}
+
+	for (i = 0; i < count; i++) {
+		clk = clk_hw_get_parent_by_index(hwclk, i)->clk;
+		data->pclk[i] = clk;
+		freq = clk_get_rate(clk);
+		table[i].frequency = freq / 1000;
+		table[i].driver_data = i;
+	}
+	freq_table_redup(table, count);
+	freq_table_sort(table, count);
+	table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* set the min and max frequency properly */
+	ret = cpufreq_table_validate_and_show(policy, table);
+	if (ret) {
+		pr_err("invalid frequency table: %d\n", ret);
+		goto err_nomem1;
+	}
+
+	data->table = table;
+
+	/* update ->cpus if we have cluster, no harm if not */
+	set_affected_cpus(policy);
+	policy->driver_data = data;
+
+	/* Minimum transition latency is 12 platform clocks */
+	u64temp = 12ULL * NSEC_PER_SEC;
+	do_div(u64temp, get_bus_freq());
+	policy->cpuinfo.transition_latency = u64temp + 1;
+
+	of_node_put(np);
+
+	return 0;
+
+err_nomem1:
+	kfree(table);
+err_pclk:
+	kfree(data->pclk);
+err_nomem2:
+	kfree(data);
+err_np:
+	of_node_put(np);
+
+	return -ENODEV;
+}
+
+static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct cpu_data *data = policy->driver_data;
+
+	cpufreq_cooling_unregister(data->cdev);
+	kfree(data->pclk);
+	kfree(data->table);
+	kfree(data);
+	policy->driver_data = NULL;
+
+	return 0;
+}
+
+static int qoriq_cpufreq_target(struct cpufreq_policy *policy,
+		unsigned int index)
+{
+	struct clk *parent;
+	struct cpu_data *data = policy->driver_data;
+
+	parent = data->pclk[data->table[index].driver_data];
+	return clk_set_parent(policy->clk, parent);
+}
+
+
+static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct cpu_data *cpud = policy->driver_data;
+	struct device_node *np = of_get_cpu_node(policy->cpu, NULL);
+
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		cpud->cdev = of_cpufreq_cooling_register(np, policy);
+
+		if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) {
+			pr_err("cpu%d is not running as cooling device: %ld\n",
+					policy->cpu, PTR_ERR(cpud->cdev));
+
+			cpud->cdev = NULL;
+		}
+	}
+
+	of_node_put(np);
+}
+
+static struct cpufreq_driver qoriq_cpufreq_driver = {
+	.name		= "qoriq_cpufreq",
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= qoriq_cpufreq_cpu_init,
+	.exit		= qoriq_cpufreq_cpu_exit,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= qoriq_cpufreq_target,
+	.get		= cpufreq_generic_get,
+	.ready		= qoriq_cpufreq_ready,
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct soc_data blacklist = {
+	.flags = SOC_BLACKLIST,
+};
+
+static const struct of_device_id node_matches[] __initconst = {
+	/* e6500 cannot use cpufreq due to erratum A-008083 */
+	{ .compatible = "fsl,b4420-clockgen", &blacklist },
+	{ .compatible = "fsl,b4860-clockgen", &blacklist },
+	{ .compatible = "fsl,t2080-clockgen", &blacklist },
+	{ .compatible = "fsl,t4240-clockgen", &blacklist },
+
+	{ .compatible = "fsl,ls1012a-clockgen", },
+	{ .compatible = "fsl,ls1021a-clockgen", },
+	{ .compatible = "fsl,ls1043a-clockgen", },
+	{ .compatible = "fsl,ls1046a-clockgen", },
+	{ .compatible = "fsl,ls1088a-clockgen", },
+	{ .compatible = "fsl,ls2080a-clockgen", },
+	{ .compatible = "fsl,p4080-clockgen", },
+	{ .compatible = "fsl,qoriq-clockgen-1.0", },
+	{ .compatible = "fsl,qoriq-clockgen-2.0", },
+	{}
+};
+
+static int __init qoriq_cpufreq_init(void)
+{
+	int ret;
+	struct device_node  *np;
+	const struct of_device_id *match;
+	const struct soc_data *data;
+
+	np = of_find_matching_node(NULL, node_matches);
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(node_matches, np);
+	data = match->data;
+
+	of_node_put(np);
+
+	if (data && data->flags & SOC_BLACKLIST)
+		return -ENODEV;
+
+	ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
+	if (!ret)
+		pr_info("Freescale QorIQ CPU frequency scaling driver\n");
+
+	return ret;
+}
+module_init(qoriq_cpufreq_init);
+
+static void __exit qoriq_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&qoriq_cpufreq_driver);
+}
+module_exit(qoriq_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
+MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c2410-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2410-cpufreq.c
new file mode 100644
index 0000000..b8e5da8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2410-cpufreq.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct subsys_interface s3c2410_cpufreq_interface = {
+	.name		= "s3c2410_cpufreq",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410_cpufreq_interface);
+}
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct device *dev,
+				struct subsys_interface *sif)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(dev, sif);
+}
+
+static struct subsys_interface s3c2410a_cpufreq_interface = {
+	.name		= "s3c2410a_cpufreq",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410a_cpufreq_interface);
+}
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c2412-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2412-cpufreq.c
new file mode 100644
index 0000000..b04b6f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2412-cpufreq.c
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		pr_err("cannot find hclk clock\n");
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		pr_err("cannot find fclk clock\n");
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
+			fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		pr_err("cannot find arm clock\n");
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		pr_err("cannot find xtal clock\n");
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct subsys_interface s3c2412_cpufreq_interface = {
+	.name		= "s3c2412_cpufreq",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2412_cpufreq_interface);
+}
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c2416-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2416-cpufreq.c
new file mode 100644
index 0000000..5b2db3c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2416-cpufreq.c
@@ -0,0 +1,490 @@
+/*
+ * S3C2416/2450 CPUfreq Support
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on s3c64xx_cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+
+static DEFINE_MUTEX(cpufreq_lock);
+
+struct s3c2416_data {
+	struct clk *armdiv;
+	struct clk *armclk;
+	struct clk *hclk;
+
+	unsigned long regulator_latency;
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct regulator *vddarm;
+#endif
+
+	struct cpufreq_frequency_table *freq_table;
+
+	bool is_dvs;
+	bool disable_dvs;
+};
+
+static struct s3c2416_data s3c2416_cpufreq;
+
+struct s3c2416_dvfs {
+	unsigned int vddarm_min;
+	unsigned int vddarm_max;
+};
+
+/* pseudo-frequency for dvs mode */
+#define FREQ_DVS	132333
+
+/* frequency to sleep and reboot in
+ * it's essential to leave dvs, as some boards do not reconfigure the
+ * regulator on reboot
+ */
+#define FREQ_SLEEP	133333
+
+/* Sources for the ARMCLK */
+#define SOURCE_HCLK	0
+#define SOURCE_ARMDIV	1
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+/* S3C2416 only supports changing the voltage in the dvs-mode.
+ * Voltages down to 1.0V seem to work, so we take what the regulator
+ * can get us.
+ */
+static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
+	[SOURCE_HCLK] = {  950000, 1250000 },
+	[SOURCE_ARMDIV] = { 1250000, 1350000 },
+};
+#endif
+
+static struct cpufreq_frequency_table s3c2416_freq_table[] = {
+	{ 0, SOURCE_HCLK, FREQ_DVS },
+	{ 0, SOURCE_ARMDIV, 133333 },
+	{ 0, SOURCE_ARMDIV, 266666 },
+	{ 0, SOURCE_ARMDIV, 400000 },
+	{ 0, 0, CPUFREQ_TABLE_END },
+};
+
+static struct cpufreq_frequency_table s3c2450_freq_table[] = {
+	{ 0, SOURCE_HCLK, FREQ_DVS },
+	{ 0, SOURCE_ARMDIV, 133500 },
+	{ 0, SOURCE_ARMDIV, 267000 },
+	{ 0, SOURCE_ARMDIV, 534000 },
+	{ 0, 0, CPUFREQ_TABLE_END },
+};
+
+static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+	if (cpu != 0)
+		return 0;
+
+	/* return our pseudo-frequency when in dvs mode */
+	if (s3c_freq->is_dvs)
+		return FREQ_DVS;
+
+	return clk_get_rate(s3c_freq->armclk) / 1000;
+}
+
+static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
+				      unsigned int freq)
+{
+	int ret;
+
+	if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
+		ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
+		if (ret < 0) {
+			pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
+			       freq, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct s3c2416_dvfs *dvfs;
+#endif
+	int ret;
+
+	if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: already in dvs mode, nothing to do\n");
+		return 0;
+	}
+
+	pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
+		 clk_get_rate(s3c_freq->hclk) / 1000);
+	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
+		return ret;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	/* changing the core voltage is only allowed when in dvs mode */
+	if (s3c_freq->vddarm) {
+		dvfs = &s3c2416_dvfs_table[idx];
+
+		pr_debug("cpufreq: setting regulator to %d-%d\n",
+			 dvfs->vddarm_min, dvfs->vddarm_max);
+		ret = regulator_set_voltage(s3c_freq->vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+
+		/* when lowering the voltage failed, there is nothing to do */
+		if (ret != 0)
+			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+	}
+#endif
+
+	s3c_freq->is_dvs = 1;
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct s3c2416_dvfs *dvfs;
+#endif
+	int ret;
+
+	if (!s3c_freq->is_dvs) {
+		pr_debug("cpufreq: not in dvs mode, so can't leave\n");
+		return 0;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	if (s3c_freq->vddarm) {
+		dvfs = &s3c2416_dvfs_table[idx];
+
+		pr_debug("cpufreq: setting regulator to %d-%d\n",
+			 dvfs->vddarm_min, dvfs->vddarm_max);
+		ret = regulator_set_voltage(s3c_freq->vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+			return ret;
+		}
+	}
+#endif
+
+	/* force armdiv to hclk frequency for transition from dvs*/
+	if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
+		pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
+			 clk_get_rate(s3c_freq->hclk) / 1000);
+		ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
+					clk_get_rate(s3c_freq->hclk) / 1000);
+		if (ret < 0) {
+			pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
+			       clk_get_rate(s3c_freq->hclk) / 1000, ret);
+			return ret;
+		}
+	}
+
+	pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
+			clk_get_rate(s3c_freq->armdiv) / 1000);
+
+	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
+		       ret);
+		return ret;
+	}
+
+	s3c_freq->is_dvs = 0;
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
+				      unsigned int index)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	unsigned int new_freq;
+	int idx, ret, to_dvs = 0;
+
+	mutex_lock(&cpufreq_lock);
+
+	idx = s3c_freq->freq_table[index].driver_data;
+
+	if (idx == SOURCE_HCLK)
+		to_dvs = 1;
+
+	/* switching to dvs when it's not allowed */
+	if (to_dvs && s3c_freq->disable_dvs) {
+		pr_debug("cpufreq: entering dvs mode not allowed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* When leavin dvs mode, always switch the armdiv to the hclk rate
+	 * The S3C2416 has stability issues when switching directly to
+	 * higher frequencies.
+	 */
+	new_freq = (s3c_freq->is_dvs && !to_dvs)
+				? clk_get_rate(s3c_freq->hclk) / 1000
+				: s3c_freq->freq_table[index].frequency;
+
+	if (to_dvs) {
+		pr_debug("cpufreq: enter dvs\n");
+		ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
+	} else if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: leave dvs\n");
+		ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
+	} else {
+		pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
+		ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
+	}
+
+out:
+	mutex_unlock(&cpufreq_lock);
+
+	return ret;
+}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
+{
+	int count, v, i, found;
+	struct cpufreq_frequency_table *pos;
+	struct s3c2416_dvfs *dvfs;
+
+	count = regulator_count_voltages(s3c_freq->vddarm);
+	if (count < 0) {
+		pr_err("cpufreq: Unable to check supported voltages\n");
+		return;
+	}
+
+	if (!count)
+		goto out;
+
+	cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
+		dvfs = &s3c2416_dvfs_table[pos->driver_data];
+		found = 0;
+
+		/* Check only the min-voltage, more is always ok on S3C2416 */
+		for (i = 0; i < count; i++) {
+			v = regulator_list_voltage(s3c_freq->vddarm, i);
+			if (v >= dvfs->vddarm_min)
+				found = 1;
+		}
+
+		if (!found) {
+			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+				 pos->frequency);
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+	}
+
+out:
+	/* Guessed */
+	s3c_freq->regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
+					       unsigned long event, void *ptr)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	int ret;
+
+	mutex_lock(&cpufreq_lock);
+
+	/* disable further changes */
+	s3c_freq->disable_dvs = 1;
+
+	mutex_unlock(&cpufreq_lock);
+
+	/* some boards don't reconfigure the regulator on reboot, which
+	 * could lead to undervolting the cpu when the clock is reset.
+	 * Therefore we always leave the DVS mode on reboot.
+	 */
+	if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: leave dvs on reboot\n");
+		ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
+		if (ret < 0)
+			return NOTIFY_BAD;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
+	.notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
+};
+
+static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	struct cpufreq_frequency_table *pos;
+	struct clk *msysclk;
+	unsigned long rate;
+	int ret;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	msysclk = clk_get(NULL, "msysclk");
+	if (IS_ERR(msysclk)) {
+		ret = PTR_ERR(msysclk);
+		pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * S3C2416 and S3C2450 share the same processor-ID and also provide no
+	 * other means to distinguish them other than through the rate of
+	 * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
+	 */
+	rate = clk_get_rate(msysclk);
+	if (rate == 800 * 1000 * 1000) {
+		pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
+			rate / 1000);
+		s3c_freq->freq_table = s3c2416_freq_table;
+		policy->cpuinfo.max_freq = 400000;
+	} else if (rate / 1000 == 534000) {
+		pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
+			rate / 1000);
+		s3c_freq->freq_table = s3c2450_freq_table;
+		policy->cpuinfo.max_freq = 534000;
+	}
+
+	/* not needed anymore */
+	clk_put(msysclk);
+
+	if (s3c_freq->freq_table == NULL) {
+		pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
+		       rate / 1000);
+		return -ENODEV;
+	}
+
+	s3c_freq->is_dvs = 0;
+
+	s3c_freq->armdiv = clk_get(NULL, "armdiv");
+	if (IS_ERR(s3c_freq->armdiv)) {
+		ret = PTR_ERR(s3c_freq->armdiv);
+		pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
+		return ret;
+	}
+
+	s3c_freq->hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(s3c_freq->hclk)) {
+		ret = PTR_ERR(s3c_freq->hclk);
+		pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
+		goto err_hclk;
+	}
+
+	/* chech hclk rate, we only support the common 133MHz for now
+	 * hclk could also run at 66MHz, but this not often used
+	 */
+	rate = clk_get_rate(s3c_freq->hclk);
+	if (rate < 133 * 1000 * 1000) {
+		pr_err("cpufreq: HCLK not at 133MHz\n");
+		ret = -EINVAL;
+		goto err_armclk;
+	}
+
+	s3c_freq->armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(s3c_freq->armclk)) {
+		ret = PTR_ERR(s3c_freq->armclk);
+		pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
+		goto err_armclk;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	s3c_freq->vddarm = regulator_get(NULL, "vddarm");
+	if (IS_ERR(s3c_freq->vddarm)) {
+		ret = PTR_ERR(s3c_freq->vddarm);
+		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+		goto err_vddarm;
+	}
+
+	s3c2416_cpufreq_cfg_regulator(s3c_freq);
+#else
+	s3c_freq->regulator_latency = 0;
+#endif
+
+	cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
+		/* special handling for dvs mode */
+		if (pos->driver_data == 0) {
+			if (!s3c_freq->hclk) {
+				pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
+					 pos->frequency);
+				pos->frequency = CPUFREQ_ENTRY_INVALID;
+			} else {
+				continue;
+			}
+		}
+
+		/* Check for frequencies we can generate */
+		rate = clk_round_rate(s3c_freq->armdiv,
+				      pos->frequency * 1000);
+		rate /= 1000;
+		if (rate != pos->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
+				pos->frequency, rate);
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+	}
+
+	/* Datasheet says PLL stabalisation time must be at least 300us,
+	 * so but add some fudge. (reference in LOCKCON0 register description)
+	 */
+	ret = cpufreq_generic_init(policy, s3c_freq->freq_table,
+			(500 * 1000) + s3c_freq->regulator_latency);
+	if (ret)
+		goto err_freq_table;
+
+	register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
+
+	return 0;
+
+err_freq_table:
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	regulator_put(s3c_freq->vddarm);
+err_vddarm:
+#endif
+	clk_put(s3c_freq->armclk);
+err_armclk:
+	clk_put(s3c_freq->hclk);
+err_hclk:
+	clk_put(s3c_freq->armdiv);
+
+	return ret;
+}
+
+static struct cpufreq_driver s3c2416_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= s3c2416_cpufreq_set_target,
+	.get		= s3c2416_cpufreq_get_speed,
+	.init		= s3c2416_cpufreq_driver_init,
+	.name		= "s3c2416",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init s3c2416_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s3c2416_cpufreq_driver);
+}
+module_init(s3c2416_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c2440-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2440-cpufreq.c
new file mode 100644
index 0000000..d0d75b6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c2440-cpufreq.c
@@ -0,0 +1,309 @@
+/*
+ * Copyright (c) 2006-2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		pr_warn("%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+static struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		pr_err("%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct subsys_interface s3c2440_cpufreq_interface = {
+	.name		= "s3c2440_cpufreq",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2440_cpufreq_interface);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct subsys_interface s3c2442_cpufreq_interface = {
+	.name		= "s3c2442_cpufreq",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2442_cpufreq_interface);
+}
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
new file mode 100644
index 0000000..4d976e8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		pr_err("%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq.c
new file mode 100644
index 0000000..6bebc1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -0,0 +1,662 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	cfg->mpll = _clk_mpll;
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		pr_err("no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			pr_err("%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+	cpufreq_freq_transition_begin(policy, &freqs.freqs);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	cpufreq_freq_transition_end(policy, &freqs.freqs, 0);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	pr_err("no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		index = cpufreq_frequency_table_target(policy, target_freq,
+						       relation);
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+		tmp_policy.freq_table = pll_reg;
+
+		/* cpufreq_frequency_table_target returns the index
+		 * of the table entry, not the value of
+		 * the table entry's index field. */
+
+		index = cpufreq_frequency_table_target(&tmp_policy, target_freq,
+						       relation);
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		pr_err("failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	policy->clk = clk_arm;
+
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		return cpufreq_table_validate_and_show(policy, ftab);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		pr_err("%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n",
+		__func__,
+		clk_get_rate(clk_fclk) / 1000,
+		clk_get_rate(clk_hclk) / 1000,
+		clk_get_rate(clk_pclk) / 1000,
+		clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = clk_get_rate(clk_arm);
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediately having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		pr_err("%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.target		= s3c_cpufreq_target,
+	.get		= cpufreq_generic_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		pr_err("%s: failed to pass valid information\n", __func__);
+		return -EINVAL;
+	}
+
+	pr_info("S3C24XX CPU Frequency driver, %s cpu support\n",
+		info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		pr_info("%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(*ours), GFP_KERNEL);
+	if (ours == NULL) {
+		pr_err("%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		pr_err("%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	pr_info("%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		pr_err("%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	pr_info("%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	kfree(ftab);
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
+	if (!ftab) {
+		pr_err("%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				pr_err("%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			pr_err("%s: no IO support registered\n", __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(*vals) * (plls_no + 1);
+
+	vals = kzalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		pr_info("%d PLL entries\n", plls_no);
+	} else
+		pr_err("no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s3c64xx-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s3c64xx-cpufreq.c
new file mode 100644
index 0000000..0cb9040
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * S3C64xx CPUfreq Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "cpufreq: " fmt
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+
+static struct regulator *vddarm;
+static unsigned long regulator_latency;
+
+#ifdef CONFIG_CPU_S3C6410
+struct s3c64xx_dvfs {
+	unsigned int vddarm_min;
+	unsigned int vddarm_max;
+};
+
+static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
+	[4] = { 1300000, 1350000 },
+};
+
+static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
+	{ 0, 0,  66000 },
+	{ 0, 0, 100000 },
+	{ 0, 0, 133000 },
+	{ 0, 1, 200000 },
+	{ 0, 1, 222000 },
+	{ 0, 1, 266000 },
+	{ 0, 2, 333000 },
+	{ 0, 2, 400000 },
+	{ 0, 2, 532000 },
+	{ 0, 2, 533000 },
+	{ 0, 3, 667000 },
+	{ 0, 4, 800000 },
+	{ 0, 0, CPUFREQ_TABLE_END },
+};
+#endif
+
+static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
+				      unsigned int index)
+{
+	struct s3c64xx_dvfs *dvfs;
+	unsigned int old_freq, new_freq;
+	int ret;
+
+	old_freq = clk_get_rate(policy->clk) / 1000;
+	new_freq = s3c64xx_freq_table[index].frequency;
+	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && new_freq > old_freq) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("Failed to set VDDARM for %dkHz: %d\n",
+			       new_freq, ret);
+			return ret;
+		}
+	}
+#endif
+
+	ret = clk_set_rate(policy->clk, new_freq * 1000);
+	if (ret < 0) {
+		pr_err("Failed to set rate %dkHz: %d\n",
+		       new_freq, ret);
+		return ret;
+	}
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && new_freq < old_freq) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("Failed to set VDDARM for %dkHz: %d\n",
+			       new_freq, ret);
+			if (clk_set_rate(policy->clk, old_freq * 1000) < 0)
+				pr_err("Failed to restore original clock rate\n");
+
+			return ret;
+		}
+	}
+#endif
+
+	pr_debug("Set actual frequency %lukHz\n",
+		 clk_get_rate(policy->clk) / 1000);
+
+	return 0;
+}
+
+#ifdef CONFIG_REGULATOR
+static void s3c64xx_cpufreq_config_regulator(void)
+{
+	int count, v, i, found;
+	struct cpufreq_frequency_table *freq;
+	struct s3c64xx_dvfs *dvfs;
+
+	count = regulator_count_voltages(vddarm);
+	if (count < 0) {
+		pr_err("Unable to check supported voltages\n");
+	}
+
+	if (!count)
+		goto out;
+
+	cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
+		dvfs = &s3c64xx_dvfs_table[freq->driver_data];
+		found = 0;
+
+		for (i = 0; i < count; i++) {
+			v = regulator_list_voltage(vddarm, i);
+			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
+				found = 1;
+		}
+
+		if (!found) {
+			pr_debug("%dkHz unsupported by regulator\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+	}
+
+out:
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	int ret;
+	struct cpufreq_frequency_table *freq;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	if (s3c64xx_freq_table == NULL) {
+		pr_err("No frequency information for this CPU\n");
+		return -ENODEV;
+	}
+
+	policy->clk = clk_get(NULL, "armclk");
+	if (IS_ERR(policy->clk)) {
+		pr_err("Unable to obtain ARMCLK: %ld\n",
+		       PTR_ERR(policy->clk));
+		return PTR_ERR(policy->clk);
+	}
+
+#ifdef CONFIG_REGULATOR
+	vddarm = regulator_get(NULL, "vddarm");
+	if (IS_ERR(vddarm)) {
+		ret = PTR_ERR(vddarm);
+		pr_err("Failed to obtain VDDARM: %d\n", ret);
+		pr_err("Only frequency scaling available\n");
+		vddarm = NULL;
+	} else {
+		s3c64xx_cpufreq_config_regulator();
+	}
+#endif
+
+	cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
+		unsigned long r;
+
+		/* Check for frequencies we can generate */
+		r = clk_round_rate(policy->clk, freq->frequency * 1000);
+		r /= 1000;
+		if (r != freq->frequency) {
+			pr_debug("%dkHz unsupported by clock\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		/* If we have no regulator then assume startup
+		 * frequency is the maximum we can support. */
+		if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+	}
+
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	ret = cpufreq_generic_init(policy, s3c64xx_freq_table,
+			(500 * 1000) + regulator_latency);
+	if (ret != 0) {
+		pr_err("Failed to configure frequency table: %d\n",
+		       ret);
+		regulator_put(vddarm);
+		clk_put(policy->clk);
+	}
+
+	return ret;
+}
+
+static struct cpufreq_driver s3c64xx_cpufreq_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= s3c64xx_cpufreq_set_target,
+	.get		= cpufreq_generic_get,
+	.init		= s3c64xx_cpufreq_driver_init,
+	.name		= "s3c",
+};
+
+static int __init s3c64xx_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
+}
+module_init(s3c64xx_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/s5pv210-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/s5pv210-cpufreq.c
new file mode 100644
index 0000000..5d31c2d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/s5pv210-cpufreq.c
@@ -0,0 +1,660 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regulator/consumer.h>
+
+static void __iomem *clk_base;
+static void __iomem *dmc_base[2];
+
+#define S5P_CLKREG(x)		(clk_base + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
+
+#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_SHIFT	(16)
+#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT           (0)
+#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT           (4)
+#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT           (0)
+#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT           (4)
+#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static DEFINE_MUTEX(set_freq_lock);
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/* Use 800MHz when entering sleep mode */
+#define SLEEP_FREQ	(800 * 1000)
+
+/* Tracks if cpu freqency can be updated anymore */
+static bool no_cpufreq_access;
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+	unsigned long freq;	/* HZ */
+	unsigned long refresh;	/* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+	L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+	LPDDR	= 0x1,
+	LPDDR2	= 0x2,
+	DDR2	= 0x4,
+};
+
+enum s5pv210_dmc_port {
+	DMC0 = 0,
+	DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+	{0, L0, 1000*1000},
+	{0, L1, 800*1000},
+	{0, L2, 400*1000},
+	{0, L3, 200*1000},
+	{0, L4, 100*1000},
+	{0, 0, CPUFREQ_TABLE_END},
+};
+
+static struct regulator *arm_regulator;
+static struct regulator *int_regulator;
+
+struct s5pv210_dvs_conf {
+	int arm_volt;	/* uV */
+	int int_volt;	/* uV */
+};
+
+static const int arm_volt_max = 1350000;
+static const int int_volt_max = 1250000;
+
+static struct s5pv210_dvs_conf dvs_conf[] = {
+	[L0] = {
+		.arm_volt	= 1250000,
+		.int_volt	= 1100000,
+	},
+	[L1] = {
+		.arm_volt	= 1200000,
+		.int_volt	= 1100000,
+	},
+	[L2] = {
+		.arm_volt	= 1050000,
+		.int_volt	= 1100000,
+	},
+	[L3] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1100000,
+	},
+	[L4] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1000000,
+	},
+};
+
+static u32 clkdiv_val[5][11] = {
+	/*
+	 * Clock divider value for following
+	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+	 *   ONEDRAM, MFC, G3D }
+	 */
+
+	/* L0 : [1000/200/100][166/83][133/66][200/200] */
+	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L1 : [800/200/100][166/83][133/66][200/200] */
+	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L2 : [400/200/100][166/83][133/66][200/200] */
+	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L3 : [200/200/100][166/83][133/66][200/200] */
+	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L4 : [100/100/100][83/83][66/66][100/100] */
+	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * accoriding to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+	unsigned long tmp, tmp1;
+	void __iomem *reg = NULL;
+
+	if (ch == DMC0) {
+		reg = (dmc_base[0] + 0x30);
+	} else if (ch == DMC1) {
+		reg = (dmc_base[1] + 0x30);
+	} else {
+		pr_err("Cannot find DMC port\n");
+		return;
+	}
+
+	/* Find current DRAM frequency */
+	tmp = s5pv210_dram_conf[ch].freq;
+
+	tmp /= freq;
+
+	tmp1 = s5pv210_dram_conf[ch].refresh;
+
+	tmp1 /= tmp;
+
+	writel_relaxed(tmp1, reg);
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned long reg;
+	unsigned int priv_index;
+	unsigned int pll_changing = 0;
+	unsigned int bus_speed_changing = 0;
+	unsigned int old_freq, new_freq;
+	int arm_volt, int_volt;
+	int ret = 0;
+
+	mutex_lock(&set_freq_lock);
+
+	if (no_cpufreq_access) {
+		pr_err("Denied access to %s as it is disabled temporarily\n",
+		       __func__);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	old_freq = policy->cur;
+	new_freq = s5pv210_freq_table[index].frequency;
+
+	/* Finding current running level index */
+	priv_index = cpufreq_table_find_index_h(policy, old_freq);
+
+	arm_volt = dvs_conf[index].arm_volt;
+	int_volt = dvs_conf[index].int_volt;
+
+	if (new_freq > old_freq) {
+		ret = regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+		if (ret)
+			goto exit;
+
+		ret = regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
+		if (ret)
+			goto exit;
+	}
+
+	/* Check if there need to change PLL */
+	if ((index == L0) || (priv_index == L0))
+		pll_changing = 1;
+
+	/* Check if there need to change System bus clock */
+	if ((index == L4) || (priv_index == L4))
+		bus_speed_changing = 1;
+
+	if (bus_speed_changing) {
+		/*
+		 * Reconfigure DRAM refresh counter value for minimum
+		 * temporary clock while changing divider.
+		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+		 */
+		if (pll_changing)
+			s5pv210_set_refresh(DMC1, 83000);
+		else
+			s5pv210_set_refresh(DMC1, 100000);
+
+		s5pv210_set_refresh(DMC0, 83000);
+	}
+
+	/*
+	 * APLL should be changed in this level
+	 * APLL -> MPLL(for stable transition) -> APLL
+	 * Some clock source's clock API are not prepared.
+	 * Do not use clock API in below code.
+	 */
+	if (pll_changing) {
+		/*
+		 * 1. Temporary Change divider for MFC and G3D
+		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+			(3 << S5P_CLKDIV2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/*
+		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+		 * (200/4=50)->(667/4=166)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+			(1 << S5P_CLKSRC2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+		 * true refresh counter is already programed in upper
+		 * code. 0x287@83Mhz
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 133000);
+
+		/* 4. SCLKAPLL -> SCLKMPLL */
+		reg = readl_relaxed(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+	}
+
+	/* Change divider */
+	reg = readl_relaxed(S5P_CLK_DIV0);
+
+	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+	writel_relaxed(reg, S5P_CLK_DIV0);
+
+	do {
+		reg = readl_relaxed(S5P_CLKDIV_STAT0);
+	} while (reg & 0xff);
+
+	/* ARM MCS value changed */
+	reg = readl_relaxed(S5P_ARM_MCS_CON);
+	reg &= ~0x3;
+	if (index >= L3)
+		reg |= 0x3;
+	else
+		reg |= 0x1;
+
+	writel_relaxed(reg, S5P_ARM_MCS_CON);
+
+	if (pll_changing) {
+		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+		writel_relaxed(0x2cf, S5P_APLL_LOCK);
+
+		/*
+		 * 6. Turn on APLL
+		 * 6-1. Set PMS values
+		 * 6-2. Wait untile the PLL is locked
+		 */
+		if (index == L0)
+			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
+		else
+			writel_relaxed(APLL_VAL_800, S5P_APLL_CON);
+
+		do {
+			reg = readl_relaxed(S5P_APLL_CON);
+		} while (!(reg & (0x1 << 29)));
+
+		/*
+		 * 7. Change souce clock from SCLKMPLL(667Mhz)
+		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+		 * (667/4=166)->(200/4=50)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+			(0 << S5P_CLKSRC2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 8. Change divider for MFC and G3D
+		 * (200/4=50)->(200/1=200)Mhz
+		 */
+		reg = readl_relaxed(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/* 9. Change MPLL to APLL in MSYS_MUX */
+		reg = readl_relaxed(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+		writel_relaxed(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+		/*
+		 * 10. DMC1 refresh counter
+		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 200000);
+	}
+
+	/*
+	 * L4 level need to change memory bus speed, hence onedram clock divier
+	 * and memory refresh parameter should be changed
+	 */
+	if (bus_speed_changing) {
+		reg = readl_relaxed(S5P_CLK_DIV6);
+		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+		writel_relaxed(reg, S5P_CLK_DIV6);
+
+		do {
+			reg = readl_relaxed(S5P_CLKDIV_STAT1);
+		} while (reg & (1 << 15));
+
+		/* Reconfigure DRAM refresh counter value */
+		if (index != L4) {
+			/*
+			 * DMC0 : 166Mhz
+			 * DMC1 : 200Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 166000);
+			s5pv210_set_refresh(DMC1, 200000);
+		} else {
+			/*
+			 * DMC0 : 83Mhz
+			 * DMC1 : 100Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 83000);
+			s5pv210_set_refresh(DMC1, 100000);
+		}
+	}
+
+	if (new_freq < old_freq) {
+		regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
+
+		regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+	}
+
+	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+
+exit:
+	mutex_unlock(&set_freq_lock);
+	return ret;
+}
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+	unsigned long val;
+
+	val = readl_relaxed(dmc_reg + 0x4);
+	val = (val & (0xf << 8));
+
+	return val >> 8;
+}
+
+static int s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned long mem_type;
+	int ret;
+
+	policy->clk = clk_get(NULL, "armclk");
+	if (IS_ERR(policy->clk))
+		return PTR_ERR(policy->clk);
+
+	dmc0_clk = clk_get(NULL, "sclk_dmc0");
+	if (IS_ERR(dmc0_clk)) {
+		ret = PTR_ERR(dmc0_clk);
+		goto out_dmc0;
+	}
+
+	dmc1_clk = clk_get(NULL, "hclk_msys");
+	if (IS_ERR(dmc1_clk)) {
+		ret = PTR_ERR(dmc1_clk);
+		goto out_dmc1;
+	}
+
+	if (policy->cpu != 0) {
+		ret = -EINVAL;
+		goto out_dmc1;
+	}
+
+	/*
+	 * check_mem_type : This driver only support LPDDR & LPDDR2.
+	 * other memory type is not supported.
+	 */
+	mem_type = check_mem_type(dmc_base[0]);
+
+	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+		pr_err("CPUFreq doesn't support this memory type\n");
+		ret = -EINVAL;
+		goto out_dmc1;
+	}
+
+	/* Find current refresh counter and frequency each DMC */
+	s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000);
+	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+	s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000);
+	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+	policy->suspend_freq = SLEEP_FREQ;
+	return cpufreq_generic_init(policy, s5pv210_freq_table, 40000);
+
+out_dmc1:
+	clk_put(dmc0_clk);
+out_dmc0:
+	clk_put(policy->clk);
+	return ret;
+}
+
+static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
+						 unsigned long event, void *ptr)
+{
+	int ret;
+
+	ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0);
+	if (ret < 0)
+		return NOTIFY_BAD;
+
+	no_cpufreq_access = true;
+	return NOTIFY_DONE;
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= s5pv210_target,
+	.get		= cpufreq_generic_get,
+	.init		= s5pv210_cpu_init,
+	.name		= "s5pv210",
+	.suspend	= cpufreq_generic_suspend,
+	.resume		= cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */
+};
+
+static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
+	.notifier_call = s5pv210_cpufreq_reboot_notifier_event,
+};
+
+static int s5pv210_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	int id;
+
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * and DMC controller registers directly and remove static mappings
+	 * and dependencies on platform headers. It is necessary to enable
+	 * S5PV210 multi-platform support and will be removed together with
+	 * this whole driver as soon as S5PV210 gets migrated to use
+	 * cpufreq-dt driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	clk_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!clk_base) {
+		pr_err("%s: failed to map clock registers\n", __func__);
+		return -EFAULT;
+	}
+
+	for_each_compatible_node(np, NULL, "samsung,s5pv210-dmc") {
+		id = of_alias_get_id(np, "dmc");
+		if (id < 0 || id >= ARRAY_SIZE(dmc_base)) {
+			pr_err("%s: failed to get alias of dmc node '%s'\n",
+				__func__, np->name);
+			of_node_put(np);
+			return id;
+		}
+
+		dmc_base[id] = of_iomap(np, 0);
+		if (!dmc_base[id]) {
+			pr_err("%s: failed to map dmc%d registers\n",
+				__func__, id);
+			of_node_put(np);
+			return -EFAULT;
+		}
+	}
+
+	for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) {
+		if (!dmc_base[id]) {
+			pr_err("%s: failed to find dmc%d node\n", __func__, id);
+			return -ENODEV;
+		}
+	}
+
+	arm_regulator = regulator_get(NULL, "vddarm");
+	if (IS_ERR(arm_regulator)) {
+		pr_err("failed to get regulator vddarm\n");
+		return PTR_ERR(arm_regulator);
+	}
+
+	int_regulator = regulator_get(NULL, "vddint");
+	if (IS_ERR(int_regulator)) {
+		pr_err("failed to get regulator vddint\n");
+		regulator_put(arm_regulator);
+		return PTR_ERR(int_regulator);
+	}
+
+	register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier);
+
+	return cpufreq_register_driver(&s5pv210_driver);
+}
+
+static struct platform_driver s5pv210_cpufreq_platdrv = {
+	.driver = {
+		.name	= "s5pv210-cpufreq",
+	},
+	.probe = s5pv210_cpufreq_probe,
+};
+builtin_platform_driver(s5pv210_cpufreq_platdrv);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sa1100-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sa1100-cpufreq.c
new file mode 100644
index 0000000..e2d8a77
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sa1100-cpufreq.c
@@ -0,0 +1,221 @@
+/*
+ * cpu-sa1100.c: clock scaling for the SA1100
+ *
+ * Copyright (C) 2000 2001, The Delft University of Technology
+ *
+ * Authors:
+ * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
+ * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
+ *   - major rewrite for linux-2.3.99
+ *   - rewritten for the more generic power management scheme in
+ *     linux-2.4.5-rmk1
+ *
+ * This software has been developed while working on the LART
+ * computing board (http://www.lartmaker.nl/), which is
+ * sponsored by the Mobile Multi-media Communications
+ * (http://www.mobimedia.org/) and Ubiquitous Communications
+ * (http://www.ubicom.tudelft.nl/) projects.
+ *
+ * The authors can be reached at:
+ *
+ *  Erik Mouw
+ *  Information and Communication Theory Group
+ *  Faculty of Information Technology and Systems
+ *  Delft University of Technology
+ *  P.O. Box 5031
+ *  2600 GA Delft
+ *  The Netherlands
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * Theory of operations
+ * ====================
+ *
+ * Clock scaling can be used to lower the power consumption of the CPU
+ * core. This will give you a somewhat longer running time.
+ *
+ * The SA-1100 has a single register to change the core clock speed:
+ *
+ *   PPCR      0x90020014    PLL config
+ *
+ * However, the DRAM timings are closely related to the core clock
+ * speed, so we need to change these, too. The used registers are:
+ *
+ *   MDCNFG    0xA0000000    DRAM config
+ *   MDCAS0    0xA0000004    Access waveform
+ *   MDCAS1    0xA0000008    Access waveform
+ *   MDCAS2    0xA000000C    Access waveform
+ *
+ * Care must be taken to change the DRAM parameters the correct way,
+ * because otherwise the DRAM becomes unusable and the kernel will
+ * crash.
+ *
+ * The simple solution to avoid a kernel crash is to put the actual
+ * clock change in ROM and jump to that code from the kernel. The main
+ * disadvantage is that the ROM has to be modified, which is not
+ * possible on all SA-1100 platforms. Another disadvantage is that
+ * jumping to ROM makes clock switching unnecessary complicated.
+ *
+ * The idea behind this driver is that the memory configuration can be
+ * changed while running from DRAM (even with interrupts turned on!)
+ * as long as all re-configuration steps yield a valid DRAM
+ * configuration. The advantages are clear: it will run on all SA-1100
+ * platforms, and the code is very simple.
+ *
+ * If you really want to understand what is going on in
+ * sa1100_update_dram_timings(), you'll have to read sections 8.2,
+ * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
+ * Developers Manual" (available for free from Intel).
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+
+#include <mach/generic.h>
+#include <mach/hardware.h>
+
+struct sa1100_dram_regs {
+	int speed;
+	u32 mdcnfg;
+	u32 mdcas0;
+	u32 mdcas1;
+	u32 mdcas2;
+};
+
+
+static struct cpufreq_driver sa1100_driver;
+
+static struct sa1100_dram_regs sa1100_dram_settings[] = {
+	/*speed,     mdcnfg,     mdcas0,     mdcas1,     mdcas2,   clock freq */
+	{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  59.0 MHz */
+	{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  73.7 MHz */
+	{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  88.5 MHz */
+	{103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
+	{118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
+	{132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
+	{147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
+	{162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
+	{176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
+	{191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
+	{206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
+	{221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
+	{235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
+	{250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
+	{265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
+	{280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
+	{ 0, 0, 0, 0, 0 } /* last entry */
+};
+
+static void sa1100_update_dram_timings(int current_speed, int new_speed)
+{
+	struct sa1100_dram_regs *settings = sa1100_dram_settings;
+
+	/* find speed */
+	while (settings->speed != 0) {
+		if (new_speed == settings->speed)
+			break;
+
+		settings++;
+	}
+
+	if (settings->speed == 0) {
+		panic("%s: couldn't find dram setting for speed %d\n",
+		      __func__, new_speed);
+	}
+
+	/* No risk, no fun: run with interrupts on! */
+	if (new_speed > current_speed) {
+		/* We're going FASTER, so first relax the memory
+		 * timings before changing the core frequency
+		 */
+
+		/* Half the memory access clock */
+		MDCNFG |= MDCNFG_CDB2;
+
+		/* The order of these statements IS important, keep 8
+		 * pulses!!
+		 */
+		MDCAS2 = settings->mdcas2;
+		MDCAS1 = settings->mdcas1;
+		MDCAS0 = settings->mdcas0;
+		MDCNFG = settings->mdcnfg;
+	} else {
+		/* We're going SLOWER: first decrease the core
+		 * frequency and then tighten the memory settings.
+		 */
+
+		/* Half the memory access clock */
+		MDCNFG |= MDCNFG_CDB2;
+
+		/* The order of these statements IS important, keep 8
+		 * pulses!!
+		 */
+		MDCAS0 = settings->mdcas0;
+		MDCAS1 = settings->mdcas1;
+		MDCAS2 = settings->mdcas2;
+		MDCNFG = settings->mdcnfg;
+	}
+}
+
+static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr)
+{
+	unsigned int cur = sa11x0_getspeed(0);
+	unsigned int new_freq;
+
+	new_freq = sa11x0_freq_table[ppcr].frequency;
+
+	if (new_freq > cur)
+		sa1100_update_dram_timings(cur, new_freq);
+
+	PPCR = ppcr;
+
+	if (new_freq < cur)
+		sa1100_update_dram_timings(cur, new_freq);
+
+	return 0;
+}
+
+static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, sa11x0_freq_table, 0);
+}
+
+static struct cpufreq_driver sa1100_driver __refdata = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= sa1100_target,
+	.get		= sa11x0_getspeed,
+	.init		= sa1100_cpu_init,
+	.name		= "sa1100",
+};
+
+static int __init sa1100_dram_init(void)
+{
+	if (cpu_is_sa1100())
+		return cpufreq_register_driver(&sa1100_driver);
+	else
+		return -ENODEV;
+}
+
+arch_initcall(sa1100_dram_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sa1110-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sa1110-cpufreq.c
new file mode 100644
index 0000000..66e5fb0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sa1110-cpufreq.c
@@ -0,0 +1,375 @@
+/*
+ *  linux/arch/arm/mach-sa1100/cpu-sa1110.c
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: there are two erratas that apply to the SA1110 here:
+ *  7 - SDRAM auto-power-up failure (rev A0)
+ * 13 - Corruption of internal register reads/writes following
+ *      SDRAM reads (rev A0, B0, B1)
+ *
+ * We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
+ *
+ * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
+ */
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/cputype.h>
+#include <asm/mach-types.h>
+
+#include <mach/generic.h>
+#include <mach/hardware.h>
+
+#undef DEBUG
+
+struct sdram_params {
+	const char name[20];
+	u_char  rows;		/* bits				 */
+	u_char  cas_latency;	/* cycles			 */
+	u_char  tck;		/* clock cycle time (ns)	 */
+	u_char  trcd;		/* activate to r/w (ns)		 */
+	u_char  trp;		/* precharge to activate (ns)	 */
+	u_char  twr;		/* write recovery time (ns)	 */
+	u_short refresh;	/* refresh time for array (us)	 */
+};
+
+struct sdram_info {
+	u_int	mdcnfg;
+	u_int	mdrefr;
+	u_int	mdcas[3];
+};
+
+static struct sdram_params sdram_tbl[] __initdata = {
+	{	/* Toshiba TC59SM716 CL2 */
+		.name		= "TC59SM716-CL2",
+		.rows		= 12,
+		.tck		= 10,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 10,
+		.refresh	= 64000,
+		.cas_latency	= 2,
+	}, {	/* Toshiba TC59SM716 CL3 */
+		.name		= "TC59SM716-CL3",
+		.rows		= 12,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Samsung K4S641632D TC75 */
+		.name		= "K4S641632D",
+		.rows		= 14,
+		.tck		= 9,
+		.trcd		= 27,
+		.trp		= 20,
+		.twr		= 9,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Samsung K4S281632B-1H */
+		.name           = "K4S281632B-1H",
+		.rows		= 12,
+		.tck		= 10,
+		.trp		= 20,
+		.twr		= 10,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Samsung KM416S4030CT */
+		.name		= "KM416S4030CT",
+		.rows		= 13,
+		.tck		= 8,
+		.trcd		= 24,	/* 3 CLKs */
+		.trp		= 24,	/* 3 CLKs */
+		.twr		= 16,	/* Trdl: 2 CLKs */
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Winbond W982516AH75L CL3 */
+		.name		= "W982516AH75L",
+		.rows		= 16,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Micron MT48LC8M16A2TG-75 */
+		.name		= "MT48LC8M16A2TG-75",
+		.rows		= 12,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	},
+};
+
+static struct sdram_params sdram_params;
+
+/*
+ * Given a period in ns and frequency in khz, calculate the number of
+ * cycles of frequency in period.  Note that we round up to the next
+ * cycle, even if we are only slightly over.
+ */
+static inline u_int ns_to_cycles(u_int ns, u_int khz)
+{
+	return (ns * khz + 999999) / 1000000;
+}
+
+/*
+ * Create the MDCAS register bit pattern.
+ */
+static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd)
+{
+	u_int shift;
+
+	rcd = 2 * rcd - 1;
+	shift = delayed + 1 + rcd;
+
+	mdcas[0]  = (1 << rcd) - 1;
+	mdcas[0] |= 0x55555555 << shift;
+	mdcas[1]  = mdcas[2] = 0x55555555 << (shift & 1);
+}
+
+static void
+sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
+		       struct sdram_params *sdram)
+{
+	u_int mem_khz, sd_khz, trp, twr;
+
+	mem_khz = cpu_khz / 2;
+	sd_khz = mem_khz;
+
+	/*
+	 * If SDCLK would invalidate the SDRAM timings,
+	 * run SDCLK at half speed.
+	 *
+	 * CPU steppings prior to B2 must either run the memory at
+	 * half speed or use delayed read latching (errata 13).
+	 */
+	if ((ns_to_cycles(sdram->tck, sd_khz) > 1) ||
+	    (read_cpuid_revision() < ARM_CPU_REV_SA1110_B2 && sd_khz < 62000))
+		sd_khz /= 2;
+
+	sd->mdcnfg = MDCNFG & 0x007f007f;
+
+	twr = ns_to_cycles(sdram->twr, mem_khz);
+
+	/* trp should always be >1 */
+	trp = ns_to_cycles(sdram->trp, mem_khz) - 1;
+	if (trp < 1)
+		trp = 1;
+
+	sd->mdcnfg |= trp << 8;
+	sd->mdcnfg |= trp << 24;
+	sd->mdcnfg |= sdram->cas_latency << 12;
+	sd->mdcnfg |= sdram->cas_latency << 28;
+	sd->mdcnfg |= twr << 14;
+	sd->mdcnfg |= twr << 30;
+
+	sd->mdrefr = MDREFR & 0xffbffff0;
+	sd->mdrefr |= 7;
+
+	if (sd_khz != mem_khz)
+		sd->mdrefr |= MDREFR_K1DB2;
+
+	/* initial number of '1's in MDCAS + 1 */
+	set_mdcas(sd->mdcas, sd_khz >= 62000,
+		ns_to_cycles(sdram->trcd, mem_khz));
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
+		sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1],
+		sd->mdcas[2]);
+#endif
+}
+
+/*
+ * Set the SDRAM refresh rate.
+ */
+static inline void sdram_set_refresh(u_int dri)
+{
+	MDREFR = (MDREFR & 0xffff000f) | (dri << 4);
+	(void) MDREFR;
+}
+
+/*
+ * Update the refresh period.  We do this such that we always refresh
+ * the SDRAMs within their permissible period.  The refresh period is
+ * always a multiple of the memory clock (fixed at cpu_clock / 2).
+ *
+ * FIXME: we don't currently take account of burst accesses here,
+ * but neither do Intels DM nor Angel.
+ */
+static void
+sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
+{
+	u_int ns_row = (sdram->refresh * 1000) >> sdram->rows;
+	u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32;
+
+#ifdef DEBUG
+	mdelay(250);
+	printk(KERN_DEBUG "new dri value = %d\n", dri);
+#endif
+
+	sdram_set_refresh(dri);
+}
+
+/*
+ * Ok, set the CPU frequency.
+ */
+static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
+{
+	struct sdram_params *sdram = &sdram_params;
+	struct sdram_info sd;
+	unsigned long flags;
+	unsigned int unused;
+
+	sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram);
+
+#if 0
+	/*
+	 * These values are wrong according to the SA1110 documentation
+	 * and errata, but they seem to work.  Need to get a storage
+	 * scope on to the SDRAM signals to work out why.
+	 */
+	if (policy->max < 147500) {
+		sd.mdrefr |= MDREFR_K1DB2;
+		sd.mdcas[0] = 0xaaaaaa7f;
+	} else {
+		sd.mdrefr &= ~MDREFR_K1DB2;
+		sd.mdcas[0] = 0xaaaaaa9f;
+	}
+	sd.mdcas[1] = 0xaaaaaaaa;
+	sd.mdcas[2] = 0xaaaaaaaa;
+#endif
+
+	/*
+	 * The clock could be going away for some time.  Set the SDRAMs
+	 * to refresh rapidly (every 64 memory clock cycles).  To get
+	 * through the whole array, we need to wait 262144 mclk cycles.
+	 * We wait 20ms to be safe.
+	 */
+	sdram_set_refresh(2);
+	if (!irqs_disabled())
+		msleep(20);
+	else
+		mdelay(20);
+
+	/*
+	 * Reprogram the DRAM timings with interrupts disabled, and
+	 * ensure that we are doing this within a complete cache line.
+	 * This means that we won't access SDRAM for the duration of
+	 * the programming.
+	 */
+	local_irq_save(flags);
+	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	udelay(10);
+	__asm__ __volatile__("\n\
+		b	2f					\n\
+		.align	5					\n\
+1:		str	%3, [%1, #0]		@ MDCNFG	\n\
+		str	%4, [%1, #28]		@ MDREFR	\n\
+		str	%5, [%1, #4]		@ MDCAS0	\n\
+		str	%6, [%1, #8]		@ MDCAS1	\n\
+		str	%7, [%1, #12]		@ MDCAS2	\n\
+		str	%8, [%2, #0]		@ PPCR		\n\
+		ldr	%0, [%1, #0]				\n\
+		b	3f					\n\
+2:		b	1b					\n\
+3:		nop						\n\
+		nop"
+		: "=&r" (unused)
+		: "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg),
+		  "r" (sd.mdrefr), "r" (sd.mdcas[0]),
+		  "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr));
+	local_irq_restore(flags);
+
+	/*
+	 * Now, return the SDRAM refresh back to normal.
+	 */
+	sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram);
+
+	return 0;
+}
+
+static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
+{
+	return cpufreq_generic_init(policy, sa11x0_freq_table, 0);
+}
+
+/* sa1110_driver needs __refdata because it must remain after init registers
+ * it with cpufreq_register_driver() */
+static struct cpufreq_driver sa1110_driver __refdata = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= sa1110_target,
+	.get		= sa11x0_getspeed,
+	.init		= sa1110_cpu_init,
+	.name		= "sa1110",
+};
+
+static struct sdram_params *sa1110_find_sdram(const char *name)
+{
+	struct sdram_params *sdram;
+
+	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl);
+	     sdram++)
+		if (strcmp(name, sdram->name) == 0)
+			return sdram;
+
+	return NULL;
+}
+
+static char sdram_name[16];
+
+static int __init sa1110_clk_init(void)
+{
+	struct sdram_params *sdram;
+	const char *name = sdram_name;
+
+	if (!cpu_is_sa1110())
+		return -ENODEV;
+
+	if (!name[0]) {
+		if (machine_is_assabet())
+			name = "TC59SM716-CL3";
+		if (machine_is_pt_system3())
+			name = "K4S641632D";
+		if (machine_is_h3100())
+			name = "KM416S4030CT";
+		if (machine_is_jornada720() || machine_is_h3600())
+			name = "K4S281632B-1H";
+		if (machine_is_nanoengine())
+			name = "MT48LC8M16A2TG-75";
+	}
+
+	sdram = sa1110_find_sdram(name);
+	if (sdram) {
+		printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
+			" twr: %d refresh: %d cas_latency: %d\n",
+			sdram->tck, sdram->trcd, sdram->trp,
+			sdram->twr, sdram->refresh, sdram->cas_latency);
+
+		memcpy(&sdram_params, sdram, sizeof(sdram_params));
+
+		return cpufreq_register_driver(&sa1110_driver);
+	}
+
+	return 0;
+}
+
+module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
+arch_initcall(sa1110_clk_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sc520_freq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sc520_freq.c
new file mode 100644
index 0000000..4225501
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sc520_freq.c
@@ -0,0 +1,140 @@
+/*
+ *	sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ *	Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on elanfreq.c
+ *
+ *	2005-03-30: - initial revision
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_CPUCTL	0x2   /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+	{0, 0x01,	100000},
+	{0, 0x02,	133000},
+	{0, 0,	CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg = *cpuctl;
+
+	switch (clockspeed_reg & 0x03) {
+	default:
+		pr_err("error: cpuctl register has unexpected value %02x\n",
+		       clockspeed_reg);
+	case 0x01:
+		return 100000;
+	case 0x02:
+		return 133000;
+	}
+}
+
+static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state)
+{
+
+	u8 clockspeed_reg;
+
+	local_irq_disable();
+
+	clockspeed_reg = *cpuctl & ~0x03;
+	*cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data;
+
+	local_irq_enable();
+
+	return 0;
+}
+
+/*
+ *	Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	/* capability check */
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9)
+		return -ENODEV;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+
+	return cpufreq_table_validate_and_show(policy, sc520_freq_table);
+}
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+	.get	= sc520_freq_get_cpu_frequency,
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = sc520_freq_target,
+	.init	= sc520_freq_cpu_init,
+	.name	= "sc520_freq",
+	.attr	= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id sc520_ids[] = {
+	{ X86_VENDOR_AMD, 4, 9 },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
+
+static int __init sc520_freq_init(void)
+{
+	int err;
+
+	if (!x86_match_cpu(sc520_ids))
+		return -ENODEV;
+
+	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+	if (!cpuctl) {
+		pr_err("sc520_freq: error: failed to remap memory\n");
+		return -ENOMEM;
+	}
+
+	err = cpufreq_register_driver(&sc520_freq_driver);
+	if (err)
+		iounmap(cpuctl);
+
+	return err;
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+	cpufreq_unregister_driver(&sc520_freq_driver);
+	iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/scpi-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/scpi-cpufreq.c
new file mode 100644
index 0000000..8de2364
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/scpi-cpufreq.c
@@ -0,0 +1,90 @@
+/*
+ * System Control and Power Interface (SCPI) based CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static struct scpi_ops *scpi_ops;
+
+static int scpi_get_transition_latency(struct device *cpu_dev)
+{
+	return scpi_ops->get_transition_latency(cpu_dev);
+}
+
+static int scpi_init_opp_table(const struct cpumask *cpumask)
+{
+	int ret;
+	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
+
+	ret = scpi_ops->add_opps_to_device(cpu_dev);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to add opps to the device\n");
+		return ret;
+	}
+
+	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);
+	if (ret)
+		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+			__func__, ret);
+	return ret;
+}
+
+static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+	.name	= "scpi",
+	.get_transition_latency = scpi_get_transition_latency,
+	.init_opp_table = scpi_init_opp_table,
+	.free_opp_table = dev_pm_opp_cpumask_remove_table,
+};
+
+static int scpi_cpufreq_probe(struct platform_device *pdev)
+{
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EIO;
+
+	return bL_cpufreq_register(&scpi_cpufreq_ops);
+}
+
+static int scpi_cpufreq_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&scpi_cpufreq_ops);
+	scpi_ops = NULL;
+	return 0;
+}
+
+static struct platform_driver scpi_cpufreq_platdrv = {
+	.driver = {
+		.name	= "scpi-cpufreq",
+	},
+	.probe		= scpi_cpufreq_probe,
+	.remove		= scpi_cpufreq_remove,
+};
+module_platform_driver(scpi_cpufreq_platdrv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sfi-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sfi-cpufreq.c
new file mode 100644
index 0000000..3779742
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sfi-cpufreq.c
@@ -0,0 +1,134 @@
+/*
+ *  SFI Performance States Driver
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  Author: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
+ *  Author: Srinidhi Kasagar <srinidhi.kasagar@intel.com>
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sfi.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+
+#include <asm/msr.h>
+
+static struct cpufreq_frequency_table *freq_table;
+static struct sfi_freq_table_entry *sfi_cpufreq_array;
+static int num_freq_table_entries;
+
+static int sfi_parse_freq(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_freq_table_entry *pentry;
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	num_freq_table_entries = SFI_GET_NUM_ENTRIES(sb,
+			struct sfi_freq_table_entry);
+	if (num_freq_table_entries <= 1) {
+		pr_err("No p-states discovered\n");
+		return -ENODEV;
+	}
+
+	pentry = (struct sfi_freq_table_entry *)sb->pentry;
+	totallen = num_freq_table_entries * sizeof(*pentry);
+
+	sfi_cpufreq_array = kmemdup(pentry, totallen, GFP_KERNEL);
+	if (!sfi_cpufreq_array)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int sfi_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int next_perf_state = 0; /* Index into perf table */
+	u32 lo, hi;
+
+	next_perf_state = policy->freq_table[index].driver_data;
+
+	rdmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, &lo, &hi);
+	lo = (lo & ~INTEL_PERF_CTL_MASK) |
+		((u32) sfi_cpufreq_array[next_perf_state].ctrl_val &
+		INTEL_PERF_CTL_MASK);
+	wrmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, lo, hi);
+
+	return 0;
+}
+
+static int sfi_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
+	policy->cpuinfo.transition_latency = 100000;	/* 100us */
+
+	return cpufreq_table_validate_and_show(policy, freq_table);
+}
+
+static struct cpufreq_driver sfi_cpufreq_driver = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= sfi_cpufreq_target,
+	.init		= sfi_cpufreq_cpu_init,
+	.name		= "sfi-cpufreq",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init sfi_cpufreq_init(void)
+{
+	int ret, i;
+
+	/* parse the freq table from SFI */
+	ret = sfi_table_parse(SFI_SIG_FREQ, NULL, NULL, sfi_parse_freq);
+	if (ret)
+		return ret;
+
+	freq_table = kzalloc(sizeof(*freq_table) *
+			(num_freq_table_entries + 1), GFP_KERNEL);
+	if (!freq_table) {
+		ret = -ENOMEM;
+		goto err_free_array;
+	}
+
+	for (i = 0; i < num_freq_table_entries; i++) {
+		freq_table[i].driver_data = i;
+		freq_table[i].frequency = sfi_cpufreq_array[i].freq_mhz * 1000;
+	}
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	ret = cpufreq_register_driver(&sfi_cpufreq_driver);
+	if (ret)
+		goto err_free_tbl;
+
+	return ret;
+
+err_free_tbl:
+	kfree(freq_table);
+err_free_array:
+	kfree(sfi_cpufreq_array);
+	return ret;
+}
+late_initcall(sfi_cpufreq_init);
+
+static void __exit sfi_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&sfi_cpufreq_driver);
+	kfree(freq_table);
+	kfree(sfi_cpufreq_array);
+}
+module_exit(sfi_cpufreq_exit);
+
+MODULE_AUTHOR("Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>");
+MODULE_DESCRIPTION("SFI Performance-States Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sh-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sh-cpufreq.c
new file mode 100644
index 0000000..28893d4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sh-cpufreq.c
@@ -0,0 +1,185 @@
+/*
+ * cpufreq driver for the SuperH processors.
+ *
+ * Copyright (C) 2002 - 2012 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown
+ *
+ * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
+ *
+ *   Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "cpufreq: " fmt
+
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
+#include <linux/clk.h>
+#include <linux/percpu.h>
+#include <linux/sh_clk.h>
+
+static DEFINE_PER_CPU(struct clk, sh_cpuclk);
+
+struct cpufreq_target {
+	struct cpufreq_policy	*policy;
+	unsigned int		freq;
+};
+
+static unsigned int sh_cpufreq_get(unsigned int cpu)
+{
+	return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
+}
+
+static long __sh_cpufreq_target(void *arg)
+{
+	struct cpufreq_target *target = arg;
+	struct cpufreq_policy *policy = target->policy;
+	int cpu = policy->cpu;
+	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+	struct cpufreq_freqs freqs;
+	struct device *dev;
+	long freq;
+
+	if (smp_processor_id() != cpu)
+		return -ENODEV;
+
+	dev = get_cpu_device(cpu);
+
+	/* Convert target_freq from kHz to Hz */
+	freq = clk_round_rate(cpuclk, target->freq * 1000);
+
+	if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
+		return -EINVAL;
+
+	dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
+
+	freqs.old	= sh_cpufreq_get(cpu);
+	freqs.new	= (freq + 500) / 1000;
+	freqs.flags	= 0;
+
+	cpufreq_freq_transition_begin(target->policy, &freqs);
+	clk_set_rate(cpuclk, freq);
+	cpufreq_freq_transition_end(target->policy, &freqs, 0);
+
+	dev_dbg(dev, "set frequency %lu Hz\n", freq);
+	return 0;
+}
+
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int sh_cpufreq_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	struct cpufreq_target data = { .policy = policy, .freq = target_freq };
+
+	return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
+}
+
+static int sh_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
+	struct cpufreq_frequency_table *freq_table;
+
+	freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
+	cpufreq_verify_within_cpu_limits(policy);
+
+	policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
+	policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
+
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+	struct cpufreq_frequency_table *freq_table;
+	struct device *dev;
+
+	dev = get_cpu_device(cpu);
+
+	cpuclk = clk_get(dev, "cpu_clk");
+	if (IS_ERR(cpuclk)) {
+		dev_err(dev, "couldn't get CPU clk\n");
+		return PTR_ERR(cpuclk);
+	}
+
+	freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
+	if (freq_table) {
+		int result;
+
+		result = cpufreq_table_validate_and_show(policy, freq_table);
+		if (result)
+			return result;
+	} else {
+		dev_notice(dev, "no frequency table found, falling back "
+			   "to rate rounding.\n");
+
+		policy->min = policy->cpuinfo.min_freq =
+			(clk_round_rate(cpuclk, 1) + 500) / 1000;
+		policy->max = policy->cpuinfo.max_freq =
+			(clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
+	}
+
+	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
+	       "Maximum %u.%03u MHz.\n",
+	       policy->min / 1000, policy->min % 1000,
+	       policy->max / 1000, policy->max % 1000);
+
+	return 0;
+}
+
+static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
+
+	clk_put(cpuclk);
+
+	return 0;
+}
+
+static struct cpufreq_driver sh_cpufreq_driver = {
+	.name		= "sh",
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.get		= sh_cpufreq_get,
+	.target		= sh_cpufreq_target,
+	.verify		= sh_cpufreq_verify,
+	.init		= sh_cpufreq_cpu_init,
+	.exit		= sh_cpufreq_cpu_exit,
+	.attr		= cpufreq_generic_attr,
+};
+
+static int __init sh_cpufreq_module_init(void)
+{
+	pr_notice("SuperH CPU frequency driver.\n");
+	return cpufreq_register_driver(&sh_cpufreq_driver);
+}
+
+static void __exit sh_cpufreq_module_exit(void)
+{
+	cpufreq_unregister_driver(&sh_cpufreq_driver);
+}
+
+module_init(sh_cpufreq_module_init);
+module_exit(sh_cpufreq_module_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("cpufreq driver for SuperH");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us2e-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us2e-cpufreq.c
new file mode 100644
index 0000000..90f33ef
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us2e-cpufreq.c
@@ -0,0 +1,375 @@
+/* us2e_cpufreq.c: UltraSPARC-IIe cpu frequency support
+ *
+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ *
+ * Many thanks to Dominik Brodowski for fixing up the cpufreq
+ * infrastructure in order to make this driver easier to implement.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/asi.h>
+#include <asm/timer.h>
+
+static struct cpufreq_driver *cpufreq_us2e_driver;
+
+struct us2e_freq_percpu_info {
+	struct cpufreq_frequency_table table[6];
+};
+
+/* Indexed by cpu number. */
+static struct us2e_freq_percpu_info *us2e_freq_table;
+
+#define HBIRD_MEM_CNTL0_ADDR	0x1fe0000f010UL
+#define HBIRD_ESTAR_MODE_ADDR	0x1fe0000f080UL
+
+/* UltraSPARC-IIe has five dividers: 1, 2, 4, 6, and 8.  These are controlled
+ * in the ESTAR mode control register.
+ */
+#define ESTAR_MODE_DIV_1	0x0000000000000000UL
+#define ESTAR_MODE_DIV_2	0x0000000000000001UL
+#define ESTAR_MODE_DIV_4	0x0000000000000003UL
+#define ESTAR_MODE_DIV_6	0x0000000000000002UL
+#define ESTAR_MODE_DIV_8	0x0000000000000004UL
+#define ESTAR_MODE_DIV_MASK	0x0000000000000007UL
+
+#define MCTRL0_SREFRESH_ENAB	0x0000000000010000UL
+#define MCTRL0_REFR_COUNT_MASK	0x0000000000007f00UL
+#define MCTRL0_REFR_COUNT_SHIFT	8
+#define MCTRL0_REFR_INTERVAL	7800
+#define MCTRL0_REFR_CLKS_P_CNT	64
+
+static unsigned long read_hbreg(unsigned long addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=&r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+	return ret;
+}
+
+static void write_hbreg(unsigned long addr, unsigned long val)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* no outputs */
+			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+	if (addr == HBIRD_ESTAR_MODE_ADDR) {
+		/* Need to wait 16 clock cycles for the PLL to lock.  */
+		udelay(1);
+	}
+}
+
+static void self_refresh_ctl(int enable)
+{
+	unsigned long mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
+
+	if (enable)
+		mctrl |= MCTRL0_SREFRESH_ENAB;
+	else
+		mctrl &= ~MCTRL0_SREFRESH_ENAB;
+	write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl);
+	(void) read_hbreg(HBIRD_MEM_CNTL0_ADDR);
+}
+
+static void frob_mem_refresh(int cpu_slowing_down,
+			     unsigned long clock_tick,
+			     unsigned long old_divisor, unsigned long divisor)
+{
+	unsigned long old_refr_count, refr_count, mctrl;
+
+	refr_count  = (clock_tick * MCTRL0_REFR_INTERVAL);
+	refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
+
+	mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
+	old_refr_count = (mctrl & MCTRL0_REFR_COUNT_MASK)
+		>> MCTRL0_REFR_COUNT_SHIFT;
+
+	mctrl &= ~MCTRL0_REFR_COUNT_MASK;
+	mctrl |= refr_count << MCTRL0_REFR_COUNT_SHIFT;
+	write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl);
+	mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
+
+	if (cpu_slowing_down && !(mctrl & MCTRL0_SREFRESH_ENAB)) {
+		unsigned long usecs;
+
+		/* We have to wait for both refresh counts (old
+		 * and new) to go to zero.
+		 */
+		usecs = (MCTRL0_REFR_CLKS_P_CNT *
+			 (refr_count + old_refr_count) *
+			 1000000UL *
+			 old_divisor) / clock_tick;
+		udelay(usecs + 1UL);
+	}
+}
+
+static void us2e_transition(unsigned long estar, unsigned long new_bits,
+			    unsigned long clock_tick,
+			    unsigned long old_divisor, unsigned long divisor)
+{
+	estar &= ~ESTAR_MODE_DIV_MASK;
+
+	/* This is based upon the state transition diagram in the IIe manual.  */
+	if (old_divisor == 2 && divisor == 1) {
+		self_refresh_ctl(0);
+		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
+		frob_mem_refresh(0, clock_tick, old_divisor, divisor);
+	} else if (old_divisor == 1 && divisor == 2) {
+		frob_mem_refresh(1, clock_tick, old_divisor, divisor);
+		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
+		self_refresh_ctl(1);
+	} else if (old_divisor == 1 && divisor > 2) {
+		us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick,
+				1, 2);
+		us2e_transition(estar, new_bits, clock_tick,
+				2, divisor);
+	} else if (old_divisor > 2 && divisor == 1) {
+		us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick,
+				old_divisor, 2);
+		us2e_transition(estar, new_bits, clock_tick,
+				2, divisor);
+	} else if (old_divisor < divisor) {
+		frob_mem_refresh(0, clock_tick, old_divisor, divisor);
+		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
+	} else if (old_divisor > divisor) {
+		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
+		frob_mem_refresh(1, clock_tick, old_divisor, divisor);
+	} else {
+		BUG();
+	}
+}
+
+static unsigned long index_to_estar_mode(unsigned int index)
+{
+	switch (index) {
+	case 0:
+		return ESTAR_MODE_DIV_1;
+
+	case 1:
+		return ESTAR_MODE_DIV_2;
+
+	case 2:
+		return ESTAR_MODE_DIV_4;
+
+	case 3:
+		return ESTAR_MODE_DIV_6;
+
+	case 4:
+		return ESTAR_MODE_DIV_8;
+
+	default:
+		BUG();
+	}
+}
+
+static unsigned long index_to_divisor(unsigned int index)
+{
+	switch (index) {
+	case 0:
+		return 1;
+
+	case 1:
+		return 2;
+
+	case 2:
+		return 4;
+
+	case 3:
+		return 6;
+
+	case 4:
+		return 8;
+
+	default:
+		BUG();
+	}
+}
+
+static unsigned long estar_to_divisor(unsigned long estar)
+{
+	unsigned long ret;
+
+	switch (estar & ESTAR_MODE_DIV_MASK) {
+	case ESTAR_MODE_DIV_1:
+		ret = 1;
+		break;
+	case ESTAR_MODE_DIV_2:
+		ret = 2;
+		break;
+	case ESTAR_MODE_DIV_4:
+		ret = 4;
+		break;
+	case ESTAR_MODE_DIV_6:
+		ret = 6;
+		break;
+	case ESTAR_MODE_DIV_8:
+		ret = 8;
+		break;
+	default:
+		BUG();
+	}
+
+	return ret;
+}
+
+static void __us2e_freq_get(void *arg)
+{
+	unsigned long *estar = arg;
+
+	*estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
+}
+
+static unsigned int us2e_freq_get(unsigned int cpu)
+{
+	unsigned long clock_tick, estar;
+
+	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	if (smp_call_function_single(cpu, __us2e_freq_get, &estar, 1))
+		return 0;
+
+	return clock_tick / estar_to_divisor(estar);
+}
+
+static void __us2e_freq_target(void *arg)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int *index = arg;
+	unsigned long new_bits, new_freq;
+	unsigned long clock_tick, divisor, old_divisor, estar;
+
+	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	new_bits = index_to_estar_mode(*index);
+	divisor = index_to_divisor(*index);
+	new_freq /= divisor;
+
+	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
+
+	old_divisor = estar_to_divisor(estar);
+
+	if (old_divisor != divisor) {
+		us2e_transition(estar, new_bits, clock_tick * 1000,
+				old_divisor, divisor);
+	}
+}
+
+static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int cpu = policy->cpu;
+
+	return smp_call_function_single(cpu, __us2e_freq_target, &index, 1);
+}
+
+static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	struct cpufreq_frequency_table *table =
+		&us2e_freq_table[cpu].table[0];
+
+	table[0].driver_data = 0;
+	table[0].frequency = clock_tick / 1;
+	table[1].driver_data = 1;
+	table[1].frequency = clock_tick / 2;
+	table[2].driver_data = 2;
+	table[2].frequency = clock_tick / 4;
+	table[2].driver_data = 3;
+	table[2].frequency = clock_tick / 6;
+	table[2].driver_data = 4;
+	table[2].frequency = clock_tick / 8;
+	table[2].driver_data = 5;
+	table[3].frequency = CPUFREQ_TABLE_END;
+
+	policy->cpuinfo.transition_latency = 0;
+	policy->cur = clock_tick;
+
+	return cpufreq_table_validate_and_show(policy, table);
+}
+
+static int us2e_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+	if (cpufreq_us2e_driver)
+		us2e_freq_target(policy, 0);
+
+	return 0;
+}
+
+static int __init us2e_freq_init(void)
+{
+	unsigned long manuf, impl, ver;
+	int ret;
+
+	if (tlb_type != spitfire)
+		return -ENODEV;
+
+	__asm__("rdpr %%ver, %0" : "=r" (ver));
+	manuf = ((ver >> 48) & 0xffff);
+	impl  = ((ver >> 32) & 0xffff);
+
+	if (manuf == 0x17 && impl == 0x13) {
+		struct cpufreq_driver *driver;
+
+		ret = -ENOMEM;
+		driver = kzalloc(sizeof(*driver), GFP_KERNEL);
+		if (!driver)
+			goto err_out;
+
+		us2e_freq_table = kzalloc((NR_CPUS * sizeof(*us2e_freq_table)),
+			GFP_KERNEL);
+		if (!us2e_freq_table)
+			goto err_out;
+
+		driver->init = us2e_freq_cpu_init;
+		driver->verify = cpufreq_generic_frequency_table_verify;
+		driver->target_index = us2e_freq_target;
+		driver->get = us2e_freq_get;
+		driver->exit = us2e_freq_cpu_exit;
+		strcpy(driver->name, "UltraSPARC-IIe");
+
+		cpufreq_us2e_driver = driver;
+		ret = cpufreq_register_driver(driver);
+		if (ret)
+			goto err_out;
+
+		return 0;
+
+err_out:
+		if (driver) {
+			kfree(driver);
+			cpufreq_us2e_driver = NULL;
+		}
+		kfree(us2e_freq_table);
+		us2e_freq_table = NULL;
+		return ret;
+	}
+
+	return -ENODEV;
+}
+
+static void __exit us2e_freq_exit(void)
+{
+	if (cpufreq_us2e_driver) {
+		cpufreq_unregister_driver(cpufreq_us2e_driver);
+		kfree(cpufreq_us2e_driver);
+		cpufreq_us2e_driver = NULL;
+		kfree(us2e_freq_table);
+		us2e_freq_table = NULL;
+	}
+}
+
+MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
+MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-IIe");
+MODULE_LICENSE("GPL");
+
+module_init(us2e_freq_init);
+module_exit(us2e_freq_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us3-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us3-cpufreq.c
new file mode 100644
index 0000000..30645b0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sparc-us3-cpufreq.c
@@ -0,0 +1,223 @@
+/* us3_cpufreq.c: UltraSPARC-III cpu frequency support
+ *
+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ *
+ * Many thanks to Dominik Brodowski for fixing up the cpufreq
+ * infrastructure in order to make this driver easier to implement.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include <asm/head.h>
+#include <asm/timer.h>
+
+static struct cpufreq_driver *cpufreq_us3_driver;
+
+struct us3_freq_percpu_info {
+	struct cpufreq_frequency_table table[4];
+};
+
+/* Indexed by cpu number. */
+static struct us3_freq_percpu_info *us3_freq_table;
+
+/* UltraSPARC-III has three dividers: 1, 2, and 32.  These are controlled
+ * in the Safari config register.
+ */
+#define SAFARI_CFG_DIV_1	0x0000000000000000UL
+#define SAFARI_CFG_DIV_2	0x0000000040000000UL
+#define SAFARI_CFG_DIV_32	0x0000000080000000UL
+#define SAFARI_CFG_DIV_MASK	0x00000000C0000000UL
+
+static void read_safari_cfg(void *arg)
+{
+	unsigned long ret, *val = arg;
+
+	__asm__ __volatile__("ldxa	[%%g0] %1, %0"
+			     : "=&r" (ret)
+			     : "i" (ASI_SAFARI_CONFIG));
+	*val = ret;
+}
+
+static void update_safari_cfg(void *arg)
+{
+	unsigned long reg, *new_bits = arg;
+
+	read_safari_cfg(&reg);
+	reg &= ~SAFARI_CFG_DIV_MASK;
+	reg |= *new_bits;
+
+	__asm__ __volatile__("stxa	%0, [%%g0] %1\n\t"
+			     "membar	#Sync"
+			     : /* no outputs */
+			     : "r" (reg), "i" (ASI_SAFARI_CONFIG)
+			     : "memory");
+}
+
+static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
+{
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	unsigned long ret;
+
+	switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
+	case SAFARI_CFG_DIV_1:
+		ret = clock_tick / 1;
+		break;
+	case SAFARI_CFG_DIV_2:
+		ret = clock_tick / 2;
+		break;
+	case SAFARI_CFG_DIV_32:
+		ret = clock_tick / 32;
+		break;
+	default:
+		BUG();
+	}
+
+	return ret;
+}
+
+static unsigned int us3_freq_get(unsigned int cpu)
+{
+	unsigned long reg;
+
+	if (smp_call_function_single(cpu, read_safari_cfg, &reg, 1))
+		return 0;
+	return get_current_freq(cpu, reg);
+}
+
+static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned long new_bits, new_freq;
+
+	new_freq = sparc64_get_clock_tick(cpu) / 1000;
+	switch (index) {
+	case 0:
+		new_bits = SAFARI_CFG_DIV_1;
+		new_freq /= 1;
+		break;
+	case 1:
+		new_bits = SAFARI_CFG_DIV_2;
+		new_freq /= 2;
+		break;
+	case 2:
+		new_bits = SAFARI_CFG_DIV_32;
+		new_freq /= 32;
+		break;
+
+	default:
+		BUG();
+	}
+
+	return smp_call_function_single(cpu, update_safari_cfg, &new_bits, 1);
+}
+
+static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	struct cpufreq_frequency_table *table =
+		&us3_freq_table[cpu].table[0];
+
+	table[0].driver_data = 0;
+	table[0].frequency = clock_tick / 1;
+	table[1].driver_data = 1;
+	table[1].frequency = clock_tick / 2;
+	table[2].driver_data = 2;
+	table[2].frequency = clock_tick / 32;
+	table[3].driver_data = 0;
+	table[3].frequency = CPUFREQ_TABLE_END;
+
+	policy->cpuinfo.transition_latency = 0;
+	policy->cur = clock_tick;
+
+	return cpufreq_table_validate_and_show(policy, table);
+}
+
+static int us3_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+	if (cpufreq_us3_driver)
+		us3_freq_target(policy, 0);
+
+	return 0;
+}
+
+static int __init us3_freq_init(void)
+{
+	unsigned long manuf, impl, ver;
+	int ret;
+
+	if (tlb_type != cheetah && tlb_type != cheetah_plus)
+		return -ENODEV;
+
+	__asm__("rdpr %%ver, %0" : "=r" (ver));
+	manuf = ((ver >> 48) & 0xffff);
+	impl  = ((ver >> 32) & 0xffff);
+
+	if (manuf == CHEETAH_MANUF &&
+	    (impl == CHEETAH_IMPL ||
+	     impl == CHEETAH_PLUS_IMPL ||
+	     impl == JAGUAR_IMPL ||
+	     impl == PANTHER_IMPL)) {
+		struct cpufreq_driver *driver;
+
+		ret = -ENOMEM;
+		driver = kzalloc(sizeof(*driver), GFP_KERNEL);
+		if (!driver)
+			goto err_out;
+
+		us3_freq_table = kzalloc((NR_CPUS * sizeof(*us3_freq_table)),
+			GFP_KERNEL);
+		if (!us3_freq_table)
+			goto err_out;
+
+		driver->init = us3_freq_cpu_init;
+		driver->verify = cpufreq_generic_frequency_table_verify;
+		driver->target_index = us3_freq_target;
+		driver->get = us3_freq_get;
+		driver->exit = us3_freq_cpu_exit;
+		strcpy(driver->name, "UltraSPARC-III");
+
+		cpufreq_us3_driver = driver;
+		ret = cpufreq_register_driver(driver);
+		if (ret)
+			goto err_out;
+
+		return 0;
+
+err_out:
+		if (driver) {
+			kfree(driver);
+			cpufreq_us3_driver = NULL;
+		}
+		kfree(us3_freq_table);
+		us3_freq_table = NULL;
+		return ret;
+	}
+
+	return -ENODEV;
+}
+
+static void __exit us3_freq_exit(void)
+{
+	if (cpufreq_us3_driver) {
+		cpufreq_unregister_driver(cpufreq_us3_driver);
+		kfree(cpufreq_us3_driver);
+		cpufreq_us3_driver = NULL;
+		kfree(us3_freq_table);
+		us3_freq_table = NULL;
+	}
+}
+
+MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
+MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III");
+MODULE_LICENSE("GPL");
+
+module_init(us3_freq_init);
+module_exit(us3_freq_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/spear-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/spear-cpufreq.c
new file mode 100644
index 0000000..4894924
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/spear-cpufreq.c
@@ -0,0 +1,246 @@
+/*
+ * drivers/cpufreq/spear-cpufreq.c
+ *
+ * CPU Frequency Scaling for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SPEAr CPUFreq driver data structure */
+static struct {
+	struct clk *clk;
+	unsigned int transition_latency;
+	struct cpufreq_frequency_table *freq_tbl;
+	u32 cnt;
+} spear_cpufreq;
+
+static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
+{
+	struct clk *sys_pclk;
+	int pclk;
+	/*
+	 * In SPEAr1340, cpu clk's parent sys clk can take input from
+	 * following sources
+	 */
+	const char *sys_clk_src[] = {
+		"sys_syn_clk",
+		"pll1_clk",
+		"pll2_clk",
+		"pll3_clk",
+	};
+
+	/*
+	 * As sys clk can have multiple source with their own range
+	 * limitation so we choose possible sources accordingly
+	 */
+	if (newfreq <= 300000000)
+		pclk = 0; /* src is sys_syn_clk */
+	else if (newfreq > 300000000 && newfreq <= 500000000)
+		pclk = 3; /* src is pll3_clk */
+	else if (newfreq == 600000000)
+		pclk = 1; /* src is pll1_clk */
+	else
+		return ERR_PTR(-EINVAL);
+
+	/* Get parent to sys clock */
+	sys_pclk = clk_get(NULL, sys_clk_src[pclk]);
+	if (IS_ERR(sys_pclk))
+		pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);
+
+	return sys_pclk;
+}
+
+/*
+ * In SPEAr1340, we cannot use newfreq directly because we need to actually
+ * access a source clock (clk) which might not be ancestor of cpu at present.
+ * Hence in SPEAr1340 we would operate on source clock directly before switching
+ * cpu clock to it.
+ */
+static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
+{
+	struct clk *sys_clk;
+	int ret = 0;
+
+	sys_clk = clk_get_parent(spear_cpufreq.clk);
+	if (IS_ERR(sys_clk)) {
+		pr_err("failed to get cpu's parent (sys) clock\n");
+		return PTR_ERR(sys_clk);
+	}
+
+	/* Set the rate of the source clock before changing the parent */
+	ret = clk_set_rate(sys_pclk, newfreq);
+	if (ret) {
+		pr_err("Failed to set sys clk rate to %lu\n", newfreq);
+		return ret;
+	}
+
+	ret = clk_set_parent(sys_clk, sys_pclk);
+	if (ret) {
+		pr_err("Failed to set sys clk parent\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int spear_cpufreq_target(struct cpufreq_policy *policy,
+		unsigned int index)
+{
+	long newfreq;
+	struct clk *srcclk;
+	int ret, mult = 1;
+
+	newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
+
+	if (of_machine_is_compatible("st,spear1340")) {
+		/*
+		 * SPEAr1340 is special in the sense that due to the possibility
+		 * of multiple clock sources for cpu clk's parent we can have
+		 * different clock source for different frequency of cpu clk.
+		 * Hence we need to choose one from amongst these possible clock
+		 * sources.
+		 */
+		srcclk = spear1340_cpu_get_possible_parent(newfreq);
+		if (IS_ERR(srcclk)) {
+			pr_err("Failed to get src clk\n");
+			return PTR_ERR(srcclk);
+		}
+
+		/* SPEAr1340: src clk is always 2 * intended cpu clk */
+		mult = 2;
+	} else {
+		/*
+		 * src clock to be altered is ancestor of cpu clock. Hence we
+		 * can directly work on cpu clk
+		 */
+		srcclk = spear_cpufreq.clk;
+	}
+
+	newfreq = clk_round_rate(srcclk, newfreq * mult);
+	if (newfreq <= 0) {
+		pr_err("clk_round_rate failed for cpu src clock\n");
+		return newfreq;
+	}
+
+	if (mult == 2)
+		ret = spear1340_set_cpu_rate(srcclk, newfreq);
+	else
+		ret = clk_set_rate(spear_cpufreq.clk, newfreq);
+
+	if (ret)
+		pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
+
+	return ret;
+}
+
+static int spear_cpufreq_init(struct cpufreq_policy *policy)
+{
+	policy->clk = spear_cpufreq.clk;
+	return cpufreq_generic_init(policy, spear_cpufreq.freq_tbl,
+			spear_cpufreq.transition_latency);
+}
+
+static struct cpufreq_driver spear_cpufreq_driver = {
+	.name		= "cpufreq-spear",
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= spear_cpufreq_target,
+	.get		= cpufreq_generic_get,
+	.init		= spear_cpufreq_init,
+	.attr		= cpufreq_generic_attr,
+};
+
+static int spear_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	const struct property *prop;
+	struct cpufreq_frequency_table *freq_tbl;
+	const __be32 *val;
+	int cnt, i, ret;
+
+	np = of_cpu_device_node_get(0);
+	if (!np) {
+		pr_err("No cpu node found");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "clock-latency",
+				&spear_cpufreq.transition_latency))
+		spear_cpufreq.transition_latency = CPUFREQ_ETERNAL;
+
+	prop = of_find_property(np, "cpufreq_tbl", NULL);
+	if (!prop || !prop->value) {
+		pr_err("Invalid cpufreq_tbl");
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	cnt = prop->length / sizeof(u32);
+	val = prop->value;
+
+	freq_tbl = kzalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+	if (!freq_tbl) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	for (i = 0; i < cnt; i++)
+		freq_tbl[i].frequency = be32_to_cpup(val++);
+
+	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+	spear_cpufreq.freq_tbl = freq_tbl;
+
+	of_node_put(np);
+
+	spear_cpufreq.clk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(spear_cpufreq.clk)) {
+		pr_err("Unable to get CPU clock\n");
+		ret = PTR_ERR(spear_cpufreq.clk);
+		goto out_put_mem;
+	}
+
+	ret = cpufreq_register_driver(&spear_cpufreq_driver);
+	if (!ret)
+		return 0;
+
+	pr_err("failed register driver: %d\n", ret);
+	clk_put(spear_cpufreq.clk);
+
+out_put_mem:
+	kfree(freq_tbl);
+	return ret;
+
+out_put_node:
+	of_node_put(np);
+	return ret;
+}
+
+static struct platform_driver spear_cpufreq_platdrv = {
+	.driver = {
+		.name	= "spear-cpufreq",
+	},
+	.probe		= spear_cpufreq_probe,
+};
+module_platform_driver(spear_cpufreq_platdrv);
+
+MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>");
+MODULE_DESCRIPTION("SPEAr CPUFreq driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-centrino.c b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-centrino.c
new file mode 100644
index 0000000..4fa5adf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-centrino.c
@@ -0,0 +1,566 @@
+/*
+ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
+ * M (part of the Centrino chipset).
+ *
+ * Since the original Pentium M, most new Intel CPUs support Enhanced
+ * SpeedStep.
+ *
+ * Despite the "SpeedStep" in the name, this is almost entirely unlike
+ * traditional SpeedStep.
+ *
+ * Modelled on speedstep.c
+ *
+ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/sched.h>	/* current */
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/gfp.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
+
+#define MAINTAINER	"linux-pm@vger.kernel.org"
+
+#define INTEL_MSR_RANGE	(0xffff)
+
+struct cpu_id
+{
+	__u8	x86;            /* CPU family */
+	__u8	x86_model;	/* model */
+	__u8	x86_stepping;	/* stepping */
+};
+
+enum {
+	CPU_BANIAS,
+	CPU_DOTHAN_A1,
+	CPU_DOTHAN_A2,
+	CPU_DOTHAN_B0,
+	CPU_MP4HT_D0,
+	CPU_MP4HT_E0,
+};
+
+static const struct cpu_id cpu_ids[] = {
+	[CPU_BANIAS]	= { 6,  9, 5 },
+	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
+	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
+	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
+	[CPU_MP4HT_D0]	= {15,  3, 4 },
+	[CPU_MP4HT_E0]	= {15,  4, 1 },
+};
+#define N_IDS	ARRAY_SIZE(cpu_ids)
+
+struct cpu_model
+{
+	const struct cpu_id *cpu_id;
+	const char	*model_name;
+	unsigned	max_freq; /* max clock in kHz */
+
+	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
+};
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
+
+/* Operating points for current CPU */
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
+
+static struct cpufreq_driver centrino_driver;
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
+
+/* Computes the correct form for IA32_PERF_CTL MSR for a particular
+   frequency/voltage operating point; frequency in MHz, volts in mV.
+   This is stored as "driver_data" in the structure. */
+#define OP(mhz, mv)							\
+	{								\
+		.frequency = (mhz) * 1000,				\
+		.driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
+	}
+
+/*
+ * These voltage tables were derived from the Intel Pentium M
+ * datasheet, document 25261202.pdf, Table 5.  I have verified they
+ * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
+ * M.
+ */
+
+/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
+static struct cpufreq_frequency_table banias_900[] =
+{
+	OP(600,  844),
+	OP(800,  988),
+	OP(900, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
+static struct cpufreq_frequency_table banias_1000[] =
+{
+	OP(600,   844),
+	OP(800,   972),
+	OP(900,   988),
+	OP(1000, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
+static struct cpufreq_frequency_table banias_1100[] =
+{
+	OP( 600,  956),
+	OP( 800, 1020),
+	OP( 900, 1100),
+	OP(1000, 1164),
+	OP(1100, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+
+/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
+static struct cpufreq_frequency_table banias_1200[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP( 900, 1020),
+	OP(1000, 1100),
+	OP(1100, 1164),
+	OP(1200, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.30GHz (Banias) */
+static struct cpufreq_frequency_table banias_1300[] =
+{
+	OP( 600,  956),
+	OP( 800, 1260),
+	OP(1000, 1292),
+	OP(1200, 1356),
+	OP(1300, 1388),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.40GHz (Banias) */
+static struct cpufreq_frequency_table banias_1400[] =
+{
+	OP( 600,  956),
+	OP( 800, 1180),
+	OP(1000, 1308),
+	OP(1200, 1436),
+	OP(1400, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.50GHz (Banias) */
+static struct cpufreq_frequency_table banias_1500[] =
+{
+	OP( 600,  956),
+	OP( 800, 1116),
+	OP(1000, 1228),
+	OP(1200, 1356),
+	OP(1400, 1452),
+	OP(1500, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.60GHz (Banias) */
+static struct cpufreq_frequency_table banias_1600[] =
+{
+	OP( 600,  956),
+	OP( 800, 1036),
+	OP(1000, 1164),
+	OP(1200, 1276),
+	OP(1400, 1420),
+	OP(1600, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.70GHz (Banias) */
+static struct cpufreq_frequency_table banias_1700[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP(1000, 1116),
+	OP(1200, 1228),
+	OP(1400, 1308),
+	OP(1700, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+#undef OP
+
+#define _BANIAS(cpuid, max, name)	\
+{	.cpu_id		= cpuid,	\
+	.model_name	= "Intel(R) Pentium(R) M processor " name "MHz", \
+	.max_freq	= (max)*1000,	\
+	.op_points	= banias_##max,	\
+}
+#define BANIAS(max)	_BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
+
+/* CPU models, their operating frequency range, and freq/voltage
+   operating points */
+static struct cpu_model models[] =
+{
+	_BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
+	BANIAS(1000),
+	BANIAS(1100),
+	BANIAS(1200),
+	BANIAS(1300),
+	BANIAS(1400),
+	BANIAS(1500),
+	BANIAS(1600),
+	BANIAS(1700),
+
+	/* NULL model_name is a wildcard */
+	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
+
+	{ NULL, }
+};
+#undef _BANIAS
+#undef BANIAS
+
+static int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
+	struct cpu_model *model;
+
+	for(model = models; model->cpu_id != NULL; model++)
+		if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
+		    (model->model_name == NULL ||
+		     strcmp(cpu->x86_model_id, model->model_name) == 0))
+			break;
+
+	if (model->cpu_id == NULL) {
+		/* No match at all */
+		pr_debug("no support for CPU model \"%s\": "
+		       "send /proc/cpuinfo to " MAINTAINER "\n",
+		       cpu->x86_model_id);
+		return -ENOENT;
+	}
+
+	if (model->op_points == NULL) {
+		/* Matched a non-match */
+		pr_debug("no table support for CPU model \"%s\"\n",
+		       cpu->x86_model_id);
+		pr_debug("try using the acpi-cpufreq driver\n");
+		return -ENOENT;
+	}
+
+	per_cpu(centrino_model, policy->cpu) = model;
+
+	pr_debug("found \"%s\": max frequency: %dkHz\n",
+	       model->model_name, model->max_freq);
+
+	return 0;
+}
+
+#else
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
+
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
+{
+	if ((c->x86 == x->x86) &&
+	    (c->x86_model == x->x86_model) &&
+	    (c->x86_stepping == x->x86_stepping))
+		return 1;
+	return 0;
+}
+
+/* To be called only after centrino_model is initialized */
+static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
+{
+	int i;
+
+	/*
+	 * Extract clock in kHz from PERF_CTL value
+	 * for centrino, as some DSDTs are buggy.
+	 * Ideally, this can be done using the acpi_data structure.
+	 */
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
+		msr = (msr >> 8) & 0xff;
+		return msr * 100000;
+	}
+
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
+		return 0;
+
+	msr &= 0xffff;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
+	}
+	if (failsafe)
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
+	else
+		return 0;
+}
+
+/* Return the current CPU frequency in kHz */
+static unsigned int get_cur_freq(unsigned int cpu)
+{
+	unsigned l, h;
+	unsigned clock_freq;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
+	clock_freq = extract_clock(l, cpu, 0);
+
+	if (unlikely(clock_freq == 0)) {
+		/*
+		 * On some CPUs, we can see transient MSR values (which are
+		 * not present in _PSS), while CPU is doing some automatic
+		 * P-state transition (like TM2). Get the last freq set 
+		 * in PERF_CTL.
+		 */
+		rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
+		clock_freq = extract_clock(l, cpu, 1);
+	}
+	return clock_freq;
+}
+
+
+static int centrino_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
+	unsigned l, h;
+	int i;
+
+	/* Only Intel makes Enhanced Speedstep-capable CPUs */
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
+		centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	for (i = 0; i < N_IDS; i++)
+		if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+			break;
+
+	if (i != N_IDS)
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
+
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
+		pr_debug("found unsupported CPU with "
+		"Enhanced SpeedStep: send /proc/cpuinfo to "
+		MAINTAINER "\n");
+		return -ENODEV;
+	}
+
+	if (centrino_cpu_init_table(policy))
+		return -ENODEV;
+
+	/* Check to see if Enhanced SpeedStep is enabled, and try to
+	   enable it if not. */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
+		pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
+		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+		/* check to see if it stuck */
+		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+			pr_info("couldn't enable Enhanced SpeedStep\n");
+			return -ENODEV;
+		}
+	}
+
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
+
+	return cpufreq_table_validate_and_show(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
+}
+
+static int centrino_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+
+	if (!per_cpu(centrino_model, cpu))
+		return -ENODEV;
+
+	per_cpu(centrino_model, cpu) = NULL;
+
+	return 0;
+}
+
+/**
+ * centrino_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ * @index: index of target frequency
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
+	int			retval = 0;
+	unsigned int		j, first_cpu;
+	struct cpufreq_frequency_table *op_points;
+	cpumask_var_t covered_cpus;
+
+	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
+		return -ENOMEM;
+
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	first_cpu = 1;
+	op_points = &per_cpu(centrino_model, cpu)->op_points[index];
+	for_each_cpu(j, policy->cpus) {
+		int good_cpu;
+
+		/*
+		 * Support for SMP systems.
+		 * Make sure we are running on CPU that wants to change freq
+		 */
+		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+			good_cpu = cpumask_any_and(policy->cpus,
+						   cpu_online_mask);
+		else
+			good_cpu = j;
+
+		if (good_cpu >= nr_cpu_ids) {
+			pr_debug("couldn't limit to CPUs in this domain\n");
+			retval = -EAGAIN;
+			if (first_cpu) {
+				/* We haven't started the transition yet. */
+				goto out;
+			}
+			break;
+		}
+
+		msr = op_points->driver_data;
+
+		if (first_cpu) {
+			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
+			if (msr == (oldmsr & 0xffff)) {
+				pr_debug("no change needed - msr was and needs "
+					"to be %x\n", oldmsr);
+				retval = 0;
+				goto out;
+			}
+
+			first_cpu = 0;
+			/* all but 16 LSB are reserved, treat them with care */
+			oldmsr &= ~0xffff;
+			msr &= 0xffff;
+			oldmsr |= msr;
+		}
+
+		wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
+		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+			break;
+
+		cpumask_set_cpu(j, covered_cpus);
+	}
+
+	if (unlikely(retval)) {
+		/*
+		 * We have failed halfway through the frequency change.
+		 * We have sent callbacks to policy->cpus and
+		 * MSRs have already been written on coverd_cpus.
+		 * Best effort undo..
+		 */
+
+		for_each_cpu(j, covered_cpus)
+			wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
+	}
+	retval = 0;
+
+out:
+	free_cpumask_var(covered_cpus);
+	return retval;
+}
+
+static struct cpufreq_driver centrino_driver = {
+	.name		= "centrino", /* should be speedstep-centrino,
+					 but there's a 16 char limit */
+	.init		= centrino_cpu_init,
+	.exit		= centrino_cpu_exit,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= centrino_target,
+	.get		= get_cur_freq,
+	.attr		= cpufreq_generic_attr,
+};
+
+/*
+ * This doesn't replace the detailed checks above because
+ * the generic CPU IDs don't have a way to match for steppings
+ * or ASCII model IDs.
+ */
+static const struct x86_cpu_id centrino_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST },
+	{}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, centrino_ids);
+#endif
+
+/**
+ * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
+ *
+ * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
+ * unsupported devices, -ENOENT if there's no voltage table for this
+ * particular CPU model, -EINVAL on problems during initiatization,
+ * and zero on success.
+ *
+ * This is quite picky.  Not only does the CPU have to advertise the
+ * "est" flag in the cpuid capability flags, we look for a specific
+ * CPU model and stepping, and we need to have the exact model name in
+ * our voltage tables.  That is, be paranoid about not releasing
+ * someone's valuable magic smoke.
+ */
+static int __init centrino_init(void)
+{
+	if (!x86_match_cpu(centrino_ids))
+		return -ENODEV;
+	return cpufreq_register_driver(&centrino_driver);
+}
+
+static void __exit centrino_exit(void)
+{
+	cpufreq_unregister_driver(&centrino_driver);
+}
+
+MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(centrino_init);
+module_exit(centrino_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-ich.c b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-ich.c
new file mode 100644
index 0000000..0412a24
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-ich.c
@@ -0,0 +1,389 @@
+/*
+ * (C) 2001  Dave Jones, Arjan van de ven.
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information, and on Intel documentation
+ *  for chipsets ICH2-M and ICH3-M.
+ *
+ *  Many thanks to Ducrot Bruno for finding and fixing the last
+ *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
+ *  for extensive testing.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+
+#include <asm/cpu_device_id.h>
+
+#include "speedstep-lib.h"
+
+
+/* speedstep_chipset:
+ *   It is necessary to know which chipset is used. As accesses to
+ * this device occur at various places in this module, we need a
+ * static struct pci_dev * pointing to that device.
+ */
+static struct pci_dev *speedstep_chipset_dev;
+
+
+/* speedstep_processor
+ */
+static enum speedstep_processor speedstep_processor;
+
+static u32 pmbase;
+
+/*
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{0, SPEEDSTEP_HIGH,	0},
+	{0, SPEEDSTEP_LOW,	0},
+	{0, 0,			CPUFREQ_TABLE_END},
+};
+
+
+/**
+ * speedstep_find_register - read the PMBASE address
+ *
+ * Returns: -ENODEV if no register could be found
+ */
+static int speedstep_find_register(void)
+{
+	if (!speedstep_chipset_dev)
+		return -ENODEV;
+
+	/* get PMBASE */
+	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+	if (!(pmbase & 0x01)) {
+		pr_err("could not find speedstep register\n");
+		return -ENODEV;
+	}
+
+	pmbase &= 0xFFFFFFFE;
+	if (!pmbase) {
+		pr_err("could not find speedstep register\n");
+		return -ENODEV;
+	}
+
+	pr_debug("pmbase is 0x%x\n", pmbase);
+	return 0;
+}
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ *   Tries to change the SpeedStep state.  Can be called from
+ *   smp_call_function_single.
+ */
+static void speedstep_set_state(unsigned int state)
+{
+	u8 pm2_blk;
+	u8 value;
+	unsigned long flags;
+
+	if (state > 0x1)
+		return;
+
+	/* Disable IRQs */
+	local_irq_save(flags);
+
+	/* read state */
+	value = inb(pmbase + 0x50);
+
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	/* write new state */
+	value &= 0xFE;
+	value |= state;
+
+	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+
+	/* Disable bus master arbitration */
+	pm2_blk = inb(pmbase + 0x20);
+	pm2_blk |= 0x01;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* Actual transition */
+	outb(value, (pmbase + 0x50));
+
+	/* Restore bus master arbitration */
+	pm2_blk &= 0xfe;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* check if transition was successful */
+	value = inb(pmbase + 0x50);
+
+	/* Enable IRQs */
+	local_irq_restore(flags);
+
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	if (state == (value & 0x1))
+		pr_debug("change to %u MHz succeeded\n",
+			speedstep_get_frequency(speedstep_processor) / 1000);
+	else
+		pr_err("change failed - I/O error\n");
+
+	return;
+}
+
+/* Wrapper for smp_call_function_single. */
+static void _speedstep_set_state(void *_state)
+{
+	speedstep_set_state(*(unsigned int *)_state);
+}
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ *   Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate(void)
+{
+	u16 value = 0;
+
+	if (!speedstep_chipset_dev)
+		return -EINVAL;
+
+	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
+	if (!(value & 0x08)) {
+		value |= 0x08;
+		pr_debug("activating SpeedStep (TM) registers\n");
+		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
+	}
+
+	return 0;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
+ *
+ *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
+ * the LPC bridge / PM module which contains all power-management
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset(void)
+{
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801DB_12,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 4; /* 4-M */
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801CA_12,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 3; /* 3-M */
+
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801BA_10,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev) {
+		/* speedstep.c causes lockups on Dell Inspirons 8000 and
+		 * 8100 which use a pretty old revision of the 82815
+		 * host bridge. Abort on these systems.
+		 */
+		struct pci_dev *hostbridge;
+
+		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82815_MC,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+
+		if (!hostbridge)
+			return 2; /* 2-M */
+
+		if (hostbridge->revision < 5) {
+			pr_debug("hostbridge does not support speedstep\n");
+			speedstep_chipset_dev = NULL;
+			pci_dev_put(hostbridge);
+			return 0;
+		}
+
+		pci_dev_put(hostbridge);
+		return 2; /* 2-M */
+	}
+
+	return 0;
+}
+
+static void get_freq_data(void *_speed)
+{
+	unsigned int *speed = _speed;
+
+	*speed = speedstep_get_frequency(speedstep_processor);
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	unsigned int speed;
+
+	/* You're supposed to ensure CPU is online. */
+	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
+		BUG();
+
+	pr_debug("detected %u kHz as current frequency\n", speed);
+	return speed;
+}
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @index: index of target frequency
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned int policy_cpu;
+
+	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
+
+	smp_call_function_single(policy_cpu, _speedstep_set_state, &index,
+				 true);
+
+	return 0;
+}
+
+
+struct get_freqs {
+	struct cpufreq_policy *policy;
+	int ret;
+};
+
+static void get_freqs_on_cpu(void *_get_freqs)
+{
+	struct get_freqs *get_freqs = _get_freqs;
+
+	get_freqs->ret =
+		speedstep_get_freqs(speedstep_processor,
+			    &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+			    &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+			    &get_freqs->policy->cpuinfo.transition_latency,
+			    &speedstep_set_state);
+}
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int policy_cpu;
+	struct get_freqs gf;
+
+	/* only run on CPU to be set, or on its sibling */
+#ifdef CONFIG_SMP
+	cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
+#endif
+	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
+
+	/* detect low and high frequency and transition latency */
+	gf.policy = policy;
+	smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
+	if (gf.ret)
+		return gf.ret;
+
+	return cpufreq_table_validate_and_show(policy, speedstep_freqs);
+}
+
+
+static struct cpufreq_driver speedstep_driver = {
+	.name	= "speedstep-ich",
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.target_index = speedstep_target,
+	.init	= speedstep_cpu_init,
+	.get	= speedstep_get,
+	.attr	= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id ss_smi_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 0xb, },
+	{ X86_VENDOR_INTEL, 6, 0x8, },
+	{ X86_VENDOR_INTEL, 15, 2 },
+	{}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	if (!x86_match_cpu(ss_smi_ids))
+		return -ENODEV;
+
+	/* detect processor */
+	speedstep_processor = speedstep_detect_processor();
+	if (!speedstep_processor) {
+		pr_debug("Intel(R) SpeedStep(TM) capable processor "
+				"not found\n");
+		return -ENODEV;
+	}
+
+	/* detect chipset */
+	if (!speedstep_detect_chipset()) {
+		pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
+				"(yet) available.\n");
+		return -ENODEV;
+	}
+
+	/* activate speedstep support */
+	if (speedstep_activate()) {
+		pci_dev_put(speedstep_chipset_dev);
+		return -EINVAL;
+	}
+
+	if (speedstep_find_register())
+		return -ENODEV;
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	pci_dev_put(speedstep_chipset_dev);
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+
+MODULE_AUTHOR("Dave Jones, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
+		"with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.c b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.c
new file mode 100644
index 0000000..dd7bb00
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.c
@@ -0,0 +1,480 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include "speedstep-lib.h"
+
+#define PFX "speedstep-lib: "
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+static int relaxed_check;
+#else
+#define relaxed_check 0
+#endif
+
+/*********************************************************************
+ *                   GET PROCESSOR CORE SPEED IN KHZ                 *
+ *********************************************************************/
+
+static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
+{
+	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+	static const struct {
+		unsigned int ratio;	/* Frequency Multiplier (x10) */
+		u8 bitmap;		/* power on configuration bits
+					[27, 25:22] (in MSR 0x2a) */
+	} msr_decode_mult[] = {
+		{ 30, 0x01 },
+		{ 35, 0x05 },
+		{ 40, 0x02 },
+		{ 45, 0x06 },
+		{ 50, 0x00 },
+		{ 55, 0x04 },
+		{ 60, 0x0b },
+		{ 65, 0x0f },
+		{ 70, 0x09 },
+		{ 75, 0x0d },
+		{ 80, 0x0a },
+		{ 85, 0x26 },
+		{ 90, 0x20 },
+		{ 100, 0x2b },
+		{ 0, 0xff }	/* error or unknown value */
+	};
+
+	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+	static const struct {
+		unsigned int value;	/* Front Side Bus speed in MHz */
+		u8 bitmap;		/* power on configuration bits [18: 19]
+					(in MSR 0x2a) */
+	} msr_decode_fsb[] = {
+		{  66, 0x0 },
+		{ 100, 0x2 },
+		{ 133, 0x1 },
+		{   0, 0xff}
+	};
+
+	u32 msr_lo, msr_tmp;
+	int i = 0, j = 0;
+
+	/* read MSR 0x2a - we only need the low 32 bits */
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	msr_tmp = msr_lo;
+
+	/* decode the FSB */
+	msr_tmp &= 0x00c0000;
+	msr_tmp >>= 18;
+	while (msr_tmp != msr_decode_fsb[i].bitmap) {
+		if (msr_decode_fsb[i].bitmap == 0xff)
+			return 0;
+		i++;
+	}
+
+	/* decode the multiplier */
+	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
+		pr_debug("workaround for early PIIIs\n");
+		msr_lo &= 0x03c00000;
+	} else
+		msr_lo &= 0x0bc00000;
+	msr_lo >>= 22;
+	while (msr_lo != msr_decode_mult[j].bitmap) {
+		if (msr_decode_mult[j].bitmap == 0xff)
+			return 0;
+		j++;
+	}
+
+	pr_debug("speed is %u\n",
+		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+
+	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
+}
+
+
+static unsigned int pentiumM_get_frequency(void)
+{
+	u32 msr_lo, msr_tmp;
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+	/* see table B-2 of 24547212.pdf */
+	if (msr_lo & 0x00040000) {
+		printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
+				msr_lo, msr_tmp);
+		return 0;
+	}
+
+	msr_tmp = (msr_lo >> 22) & 0x1f;
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * 100 * 1000));
+
+	return msr_tmp * 100 * 1000;
+}
+
+static unsigned int pentium_core_get_frequency(void)
+{
+	u32 fsb = 0;
+	u32 msr_lo, msr_tmp;
+	int ret;
+
+	rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
+	/* see table B-2 of 25366920.pdf */
+	switch (msr_lo & 0x07) {
+	case 5:
+		fsb = 100000;
+		break;
+	case 1:
+		fsb = 133333;
+		break;
+	case 3:
+		fsb = 166667;
+		break;
+	case 2:
+		fsb = 200000;
+		break;
+	case 0:
+		fsb = 266667;
+		break;
+	case 4:
+		fsb = 333333;
+		break;
+	default:
+		pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
+	}
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+			msr_lo, msr_tmp);
+
+	msr_tmp = (msr_lo >> 22) & 0x1f;
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * fsb));
+
+	ret = (msr_tmp * fsb);
+	return ret;
+}
+
+
+static unsigned int pentium4_get_frequency(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u32 msr_lo, msr_hi, mult;
+	unsigned int fsb = 0;
+	unsigned int ret;
+	u8 fsb_code;
+
+	/* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
+	 * to System Bus Frequency Ratio Field in the Processor Frequency
+	 * Configuration Register of the MSR. Therefore the current
+	 * frequency cannot be calculated and has to be measured.
+	 */
+	if (c->x86_model < 2)
+		return cpu_khz;
+
+	rdmsr(0x2c, msr_lo, msr_hi);
+
+	pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+
+	/* decode the FSB: see IA-32 Intel (C) Architecture Software
+	 * Developer's Manual, Volume 3: System Prgramming Guide,
+	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
+	 * Intel Xeon Processors, on page B-4 and B-5.
+	 */
+	fsb_code = (msr_lo >> 16) & 0x7;
+	switch (fsb_code) {
+	case 0:
+		fsb = 100 * 1000;
+		break;
+	case 1:
+		fsb = 13333 * 10;
+		break;
+	case 2:
+		fsb = 200 * 1000;
+		break;
+	}
+
+	if (!fsb)
+		printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
+				"Please send an e-mail to <linux@brodo.de>\n");
+
+	/* Multiplier. */
+	mult = msr_lo >> 24;
+
+	pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+			fsb, mult, (fsb * mult));
+
+	ret = (fsb * mult);
+	return ret;
+}
+
+
+/* Warning: may get called from smp_call_function_single. */
+unsigned int speedstep_get_frequency(enum speedstep_processor processor)
+{
+	switch (processor) {
+	case SPEEDSTEP_CPU_PCORE:
+		return pentium_core_get_frequency();
+	case SPEEDSTEP_CPU_PM:
+		return pentiumM_get_frequency();
+	case SPEEDSTEP_CPU_P4D:
+	case SPEEDSTEP_CPU_P4M:
+		return pentium4_get_frequency();
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
+		return pentium3_get_frequency(processor);
+	default:
+		return 0;
+	};
+	return 0;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_frequency);
+
+
+/*********************************************************************
+ *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
+ *********************************************************************/
+
+/* Keep in sync with the x86_cpu_id tables in the different modules */
+unsigned int speedstep_detect_processor(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	u32 ebx, msr_lo, msr_hi;
+
+	pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
+
+	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+	    ((c->x86 != 6) && (c->x86 != 0xF)))
+		return 0;
+
+	if (c->x86 == 0xF) {
+		/* Intel Mobile Pentium 4-M
+		 * or Intel Mobile Pentium 4 with 533 MHz FSB */
+		if (c->x86_model != 2)
+			return 0;
+
+		ebx = cpuid_ebx(0x00000001);
+		ebx &= 0x000000FF;
+
+		pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
+
+		switch (c->x86_stepping) {
+		case 4:
+			/*
+			 * B-stepping [M-P4-M]
+			 * sample has ebx = 0x0f, production has 0x0e.
+			 */
+			if ((ebx == 0x0e) || (ebx == 0x0f))
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		case 7:
+			/*
+			 * C-stepping [M-P4-M]
+			 * needs to have ebx=0x0e, else it's a celeron:
+			 * cf. 25130917.pdf / page 7, footnote 5 even
+			 * though 25072120.pdf / page 7 doesn't say
+			 * samples are only of B-stepping...
+			 */
+			if (ebx == 0x0e)
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		case 9:
+			/*
+			 * D-stepping [M-P4-M or M-P4/533]
+			 *
+			 * this is totally strange: CPUID 0x0F29 is
+			 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+			 * The latter need to be sorted out as they don't
+			 * support speedstep.
+			 * Celerons with CPUID 0x0F29 may have either
+			 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+			 * specific.
+			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+			 * also, M-P4M HTs have ebx=0x8, too
+			 * For now, they are distinguished by the model_id
+			 * string
+			 */
+			if ((ebx == 0x0e) ||
+				(strstr(c->x86_model_id,
+				    "Mobile Intel(R) Pentium(R) 4") != NULL))
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	}
+
+	switch (c->x86_model) {
+	case 0x0B: /* Intel PIII [Tualatin] */
+		/* cpuid_ebx(1) is 0x04 for desktop PIII,
+		 * 0x06 for mobile PIII-M */
+		ebx = cpuid_ebx(0x00000001);
+		pr_debug("ebx is %x\n", ebx);
+
+		ebx &= 0x000000FF;
+
+		if (ebx != 0x06)
+			return 0;
+
+		/* So far all PIII-M processors support SpeedStep. See
+		 * Intel's 24540640.pdf of June 2003
+		 */
+		return SPEEDSTEP_CPU_PIII_T;
+
+	case 0x08: /* Intel PIII [Coppermine] */
+
+		/* all mobile PIII Coppermines have FSB 100 MHz
+		 * ==> sort out a few desktop PIIIs. */
+		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+		pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		msr_lo &= 0x00c0000;
+		if (msr_lo != 0x0080000)
+			return 0;
+
+		/*
+		 * If the processor is a mobile version,
+		 * platform ID has bit 50 set
+		 * it has SpeedStep technology if either
+		 * bit 56 or 57 is set
+		 */
+		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+		pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		if ((msr_hi & (1<<18)) &&
+		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+			if (c->x86_stepping == 0x01) {
+				pr_debug("early PIII version\n");
+				return SPEEDSTEP_CPU_PIII_C_EARLY;
+			} else
+				return SPEEDSTEP_CPU_PIII_C;
+		}
+
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(speedstep_detect_processor);
+
+
+/*********************************************************************
+ *                     DETECT SPEEDSTEP SPEEDS                       *
+ *********************************************************************/
+
+unsigned int speedstep_get_freqs(enum speedstep_processor processor,
+				  unsigned int *low_speed,
+				  unsigned int *high_speed,
+				  unsigned int *transition_latency,
+				  void (*set_state) (unsigned int state))
+{
+	unsigned int prev_speed;
+	unsigned int ret = 0;
+	unsigned long flags;
+	ktime_t tv1, tv2;
+
+	if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
+		return -EINVAL;
+
+	pr_debug("trying to determine both speeds\n");
+
+	/* get current speed */
+	prev_speed = speedstep_get_frequency(processor);
+	if (!prev_speed)
+		return -EIO;
+
+	pr_debug("previous speed is %u\n", prev_speed);
+
+	preempt_disable();
+	local_irq_save(flags);
+
+	/* switch to low state */
+	set_state(SPEEDSTEP_LOW);
+	*low_speed = speedstep_get_frequency(processor);
+	if (!*low_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	pr_debug("low speed is %u\n", *low_speed);
+
+	/* start latency measurement */
+	if (transition_latency)
+		tv1 = ktime_get();
+
+	/* switch to high state */
+	set_state(SPEEDSTEP_HIGH);
+
+	/* end latency measurement */
+	if (transition_latency)
+		tv2 = ktime_get();
+
+	*high_speed = speedstep_get_frequency(processor);
+	if (!*high_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	pr_debug("high speed is %u\n", *high_speed);
+
+	if (*low_speed == *high_speed) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* switch to previous state, if necessary */
+	if (*high_speed != prev_speed)
+		set_state(SPEEDSTEP_LOW);
+
+	if (transition_latency) {
+		*transition_latency = ktime_to_us(ktime_sub(tv2, tv1));
+		pr_debug("transition latency is %u uSec\n", *transition_latency);
+
+		/* convert uSec to nSec and add 20% for safety reasons */
+		*transition_latency *= 1200;
+
+		/* check if the latency measurement is too high or too low
+		 * and set it to a safe value (500uSec) in that case
+		 */
+		if (*transition_latency > 10000000 ||
+		    *transition_latency < 50000) {
+			pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
+				*transition_latency, 500000);
+			*transition_latency = 500000;
+		}
+	}
+
+out:
+	local_irq_restore(flags);
+	preempt_enable();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_freqs);
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+module_param(relaxed_check, int, 0444);
+MODULE_PARM_DESC(relaxed_check,
+		"Don't do all checks for speedstep capability.");
+#endif
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.h b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.h
new file mode 100644
index 0000000..70d9cea
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-lib.h
@@ -0,0 +1,49 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+
+/* processors */
+enum speedstep_processor {
+	SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_C	   = 0x00000002,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_T	   = 0x00000003,  /* Tualatin core */
+	SPEEDSTEP_CPU_P4M	   = 0x00000004,  /* P4-M  */
+/* the following processors are not speedstep-capable and are not auto-detected
+ * in speedstep_detect_processor(). However, their speed can be detected using
+ * the speedstep_get_frequency() call. */
+	SPEEDSTEP_CPU_PM	   = 0xFFFFFF03,  /* Pentium M  */
+	SPEEDSTEP_CPU_P4D	   = 0xFFFFFF04,  /* desktop P4  */
+	SPEEDSTEP_CPU_PCORE	   = 0xFFFFFF05,  /* Core */
+};
+
+/* speedstep states -- only two of them */
+
+#define SPEEDSTEP_HIGH	0x00000000
+#define SPEEDSTEP_LOW	0x00000001
+
+
+/* detect a speedstep-capable processor */
+extern enum speedstep_processor speedstep_detect_processor(void);
+
+/* detect the current speed (in khz) of the processor */
+extern unsigned int speedstep_get_frequency(enum speedstep_processor processor);
+
+
+/* detect the low and high speeds of the processor. The callback
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or
+ * SPEEDSTEP_LOW; the second argument is zero so that no
+ * cpufreq_notify_transition calls are initiated.
+ */
+extern unsigned int speedstep_get_freqs(enum speedstep_processor processor,
+	unsigned int *low_speed,
+	unsigned int *high_speed,
+	unsigned int *transition_latency,
+	void (*set_state) (unsigned int state));
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-smi.c b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-smi.c
new file mode 100644
index 0000000..d23f24c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/speedstep-smi.c
@@ -0,0 +1,397 @@
+/*
+ * Intel SpeedStep SMI driver.
+ *
+ * (C) 2003  Hiroshi Miura <miura@da-cha.org>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#define pr_fmt(fmt) "cpufreq: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/ist.h>
+#include <asm/cpu_device_id.h>
+
+#include "speedstep-lib.h"
+
+/* speedstep system management interface port/command.
+ *
+ * These parameters are got from IST-SMI BIOS call.
+ * If user gives it, these are used.
+ *
+ */
+static int smi_port;
+static int smi_cmd;
+static unsigned int smi_sig;
+
+/* info about the processor */
+static enum speedstep_processor speedstep_processor;
+
+/*
+ * There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{0, SPEEDSTEP_HIGH,	0},
+	{0, SPEEDSTEP_LOW,	0},
+	{0, 0,			CPUFREQ_TABLE_END},
+};
+
+#define GET_SPEEDSTEP_OWNER 0
+#define GET_SPEEDSTEP_STATE 1
+#define SET_SPEEDSTEP_STATE 2
+#define GET_SPEEDSTEP_FREQS 4
+
+/* how often shall the SMI call be tried if it failed, e.g. because
+ * of DMA activity going on? */
+#define SMI_TRIES 5
+
+/**
+ * speedstep_smi_ownership
+ */
+static int speedstep_smi_ownership(void)
+{
+	u32 command, result, magic, dummy;
+	u32 function = GET_SPEEDSTEP_OWNER;
+	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+	magic = virt_to_phys(magic_data);
+
+	pr_debug("trying to obtain ownership with command %x at port %x\n",
+			command, smi_port);
+
+	__asm__ __volatile__(
+		"push %%ebp\n"
+		"out %%al, (%%dx)\n"
+		"pop %%ebp\n"
+		: "=D" (result),
+		  "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+		  "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
+		  "D" (0), "S" (magic)
+		: "memory"
+	);
+
+	pr_debug("result is %x\n", result);
+
+	return result;
+}
+
+/**
+ * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
+ * @low: the low frequency value is placed here
+ * @high: the high frequency value is placed here
+ *
+ * Only available on later SpeedStep-enabled systems, returns false results or
+ * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
+ * shows that the latter occurs if !(ist_info.event & 0xFFFF).
+ */
+static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
+{
+	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
+	u32 state = 0;
+	u32 function = GET_SPEEDSTEP_FREQS;
+
+	if (!(ist_info.event & 0xFFFF)) {
+		pr_debug("bug #1422 -- can't read freqs from BIOS\n");
+		return -ENODEV;
+	}
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	pr_debug("trying to determine frequencies with command %x at port %x\n",
+			command, smi_port);
+
+	__asm__ __volatile__(
+		"push %%ebp\n"
+		"out %%al, (%%dx)\n"
+		"pop %%ebp"
+		: "=a" (result),
+		  "=b" (high_mhz),
+		  "=c" (low_mhz),
+		  "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command),
+		  "b" (function),
+		  "c" (state),
+		  "d" (smi_port), "S" (0), "D" (0)
+	);
+
+	pr_debug("result %x, low_freq %u, high_freq %u\n",
+			result, low_mhz, high_mhz);
+
+	/* abort if results are obviously incorrect... */
+	if ((high_mhz + low_mhz) < 600)
+		return -EINVAL;
+
+	*high = high_mhz * 1000;
+	*low  = low_mhz  * 1000;
+
+	return result;
+}
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static void speedstep_set_state(unsigned int state)
+{
+	unsigned int result = 0, command, new_state, dummy;
+	unsigned long flags;
+	unsigned int function = SET_SPEEDSTEP_STATE;
+	unsigned int retry = 0;
+
+	if (state > 0x1)
+		return;
+
+	/* Disable IRQs */
+	preempt_disable();
+	local_irq_save(flags);
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	pr_debug("trying to set frequency to state %u "
+		"with command %x at port %x\n",
+		state, command, smi_port);
+
+	do {
+		if (retry) {
+			/*
+			 * We need to enable interrupts, otherwise the blockage
+			 * won't resolve.
+			 *
+			 * We disable preemption so that other processes don't
+			 * run. If other processes were running, they could
+			 * submit more DMA requests, making the blockage worse.
+			 */
+			pr_debug("retry %u, previous result %u, waiting...\n",
+					retry, result);
+			local_irq_enable();
+			mdelay(retry * 50);
+			local_irq_disable();
+		}
+		retry++;
+		__asm__ __volatile__(
+			"push %%ebp\n"
+			"out %%al, (%%dx)\n"
+			"pop %%ebp"
+			: "=b" (new_state), "=D" (result),
+			  "=c" (dummy), "=a" (dummy),
+			  "=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state),
+			  "d" (smi_port), "S" (0), "D" (0)
+			);
+	} while ((new_state != state) && (retry <= SMI_TRIES));
+
+	/* enable IRQs */
+	local_irq_restore(flags);
+	preempt_enable();
+
+	if (new_state == state)
+		pr_debug("change to %u MHz succeeded after %u tries "
+			"with result %u\n",
+			(speedstep_freqs[new_state].frequency / 1000),
+			retry, result);
+	else
+		pr_err("change to state %u failed with new_state %u and result %u\n",
+		       state, new_state, result);
+
+	return;
+}
+
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @index: index of new freq
+ *
+ * Sets a new CPUFreq policy/freq.
+ */
+static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	speedstep_set_state(index);
+
+	return 0;
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	int result;
+	unsigned int *low, *high;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	result = speedstep_smi_ownership();
+	if (result) {
+		pr_debug("fails in acquiring ownership of a SMI interface.\n");
+		return -EINVAL;
+	}
+
+	/* detect low and high frequency */
+	low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
+	high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
+
+	result = speedstep_smi_get_freqs(low, high);
+	if (result) {
+		/* fall back to speedstep_lib.c dection mechanism:
+		 * try both states out */
+		pr_debug("could not detect low and high frequencies "
+				"by SMI call.\n");
+		result = speedstep_get_freqs(speedstep_processor,
+				low, high,
+				NULL,
+				&speedstep_set_state);
+
+		if (result) {
+			pr_debug("could not detect two different speeds"
+					" -- aborting.\n");
+			return result;
+		} else
+			pr_debug("workaround worked.\n");
+	}
+
+	return cpufreq_table_validate_and_show(policy, speedstep_freqs);
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	if (cpu)
+		return -ENODEV;
+	return speedstep_get_frequency(speedstep_processor);
+}
+
+
+static int speedstep_resume(struct cpufreq_policy *policy)
+{
+	int result = speedstep_smi_ownership();
+
+	if (result)
+		pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
+
+	return result;
+}
+
+static struct cpufreq_driver speedstep_driver = {
+	.name		= "speedstep-smi",
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= speedstep_target,
+	.init		= speedstep_cpu_init,
+	.get		= speedstep_get,
+	.resume		= speedstep_resume,
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id ss_smi_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 0xb, },
+	{ X86_VENDOR_INTEL, 6, 0x8, },
+	{ X86_VENDOR_INTEL, 15, 2 },
+	{}
+};
+#if 0
+/* Not auto loaded currently */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * BIOS, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	if (!x86_match_cpu(ss_smi_ids))
+		return -ENODEV;
+
+	speedstep_processor = speedstep_detect_processor();
+
+	switch (speedstep_processor) {
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
+		break;
+	default:
+		speedstep_processor = 0;
+	}
+
+	if (!speedstep_processor) {
+		pr_debug("No supported Intel CPU detected.\n");
+		return -ENODEV;
+	}
+
+	pr_debug("signature:0x%.8x, command:0x%.8x, "
+		"event:0x%.8x, perf_level:0x%.8x.\n",
+		ist_info.signature, ist_info.command,
+		ist_info.event, ist_info.perf_level);
+
+	/* Error if no IST-SMI BIOS or no PARM
+		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
+	if ((ist_info.signature !=  0x47534943) && (
+	    (smi_port == 0) || (smi_cmd == 0)))
+		return -ENODEV;
+
+	if (smi_sig == 1)
+		smi_sig = 0x47534943;
+	else
+		smi_sig = ist_info.signature;
+
+	/* setup smi_port from MODLULE_PARM or BIOS */
+	if ((smi_port > 0xff) || (smi_port < 0))
+		return -EINVAL;
+	else if (smi_port == 0)
+		smi_port = ist_info.command & 0xff;
+
+	if ((smi_cmd > 0xff) || (smi_cmd < 0))
+		return -EINVAL;
+	else if (smi_cmd == 0)
+		smi_cmd = (ist_info.command >> 16) & 0xff;
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+module_param_hw(smi_port, int, ioport, 0444);
+module_param(smi_cmd,  int, 0444);
+module_param(smi_sig, uint, 0444);
+
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
+		"-- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
+		"-- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
+		"SMI interface.");
+
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/sti-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/sti-cpufreq.c
new file mode 100644
index 0000000..4710573
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/sti-cpufreq.c
@@ -0,0 +1,299 @@
+/*
+ * Match running platform with pre-defined OPP values for CPUFreq
+ *
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *         Lee Jones <lee.jones@linaro.org>
+ *
+ * Copyright (C) 2015 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/cpu.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+
+#define VERSION_ELEMENTS	3
+#define MAX_PCODE_NAME_LEN	7
+
+#define VERSION_SHIFT		28
+#define HW_INFO_INDEX		1
+#define MAJOR_ID_INDEX		1
+#define MINOR_ID_INDEX		2
+
+/*
+ * Only match on "suitable for ALL versions" entries
+ *
+ * This will be used with the BIT() macro.  It sets the
+ * top bit of a 32bit value and is equal to 0x80000000.
+ */
+#define DEFAULT_VERSION		31
+
+enum {
+	PCODE = 0,
+	SUBSTRATE,
+	DVFS_MAX_REGFIELDS,
+};
+
+/**
+ * ST CPUFreq Driver Data
+ *
+ * @cpu_node		CPU's OF node
+ * @syscfg_eng		Engineering Syscon register map
+ * @regmap		Syscon register map
+ */
+static struct sti_cpufreq_ddata {
+	struct device *cpu;
+	struct regmap *syscfg_eng;
+	struct regmap *syscfg;
+} ddata;
+
+static int sti_cpufreq_fetch_major(void) {
+	struct device_node *np = ddata.cpu->of_node;
+	struct device *dev = ddata.cpu;
+	unsigned int major_offset;
+	unsigned int socid;
+	int ret;
+
+	ret = of_property_read_u32_index(np, "st,syscfg",
+					 MAJOR_ID_INDEX, &major_offset);
+	if (ret) {
+		dev_err(dev, "No major number offset provided in %pOF [%d]\n",
+			np, ret);
+		return ret;
+	}
+
+	ret = regmap_read(ddata.syscfg, major_offset, &socid);
+	if (ret) {
+		dev_err(dev, "Failed to read major number from syscon [%d]\n",
+			ret);
+		return ret;
+	}
+
+	return ((socid >> VERSION_SHIFT) & 0xf) + 1;
+}
+
+static int sti_cpufreq_fetch_minor(void)
+{
+	struct device *dev = ddata.cpu;
+	struct device_node *np = dev->of_node;
+	unsigned int minor_offset;
+	unsigned int minid;
+	int ret;
+
+	ret = of_property_read_u32_index(np, "st,syscfg-eng",
+					 MINOR_ID_INDEX, &minor_offset);
+	if (ret) {
+		dev_err(dev,
+			"No minor number offset provided %pOF [%d]\n",
+			np, ret);
+		return ret;
+	}
+
+	ret = regmap_read(ddata.syscfg_eng, minor_offset, &minid);
+	if (ret) {
+		dev_err(dev,
+			"Failed to read the minor number from syscon [%d]\n",
+			ret);
+		return ret;
+	}
+
+	return minid & 0xf;
+}
+
+static int sti_cpufreq_fetch_regmap_field(const struct reg_field *reg_fields,
+					  int hw_info_offset, int field)
+{
+	struct regmap_field *regmap_field;
+	struct reg_field reg_field = reg_fields[field];
+	struct device *dev = ddata.cpu;
+	unsigned int value;
+	int ret;
+
+	reg_field.reg = hw_info_offset;
+	regmap_field = devm_regmap_field_alloc(dev,
+					       ddata.syscfg_eng,
+					       reg_field);
+	if (IS_ERR(regmap_field)) {
+		dev_err(dev, "Failed to allocate reg field\n");
+		return PTR_ERR(regmap_field);
+	}
+
+	ret = regmap_field_read(regmap_field, &value);
+	if (ret) {
+		dev_err(dev, "Failed to read %s code\n",
+			field ? "SUBSTRATE" : "PCODE");
+		return ret;
+	}
+
+	return value;
+}
+
+static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
+	[PCODE]		= REG_FIELD(0, 16, 19),
+	[SUBSTRATE]	= REG_FIELD(0, 0, 2),
+};
+
+static const struct reg_field *sti_cpufreq_match(void)
+{
+	if (of_machine_is_compatible("st,stih407") ||
+	    of_machine_is_compatible("st,stih410"))
+		return sti_stih407_dvfs_regfields;
+
+	return NULL;
+}
+
+static int sti_cpufreq_set_opp_info(void)
+{
+	struct device *dev = ddata.cpu;
+	struct device_node *np = dev->of_node;
+	const struct reg_field *reg_fields;
+	unsigned int hw_info_offset;
+	unsigned int version[VERSION_ELEMENTS];
+	int pcode, substrate, major, minor;
+	int ret;
+	char name[MAX_PCODE_NAME_LEN];
+	struct opp_table *opp_table;
+
+	reg_fields = sti_cpufreq_match();
+	if (!reg_fields) {
+		dev_err(dev, "This SoC doesn't support voltage scaling\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32_index(np, "st,syscfg-eng",
+					 HW_INFO_INDEX, &hw_info_offset);
+	if (ret) {
+		dev_warn(dev, "Failed to read HW info offset from DT\n");
+		substrate = DEFAULT_VERSION;
+		pcode = 0;
+		goto use_defaults;
+	}
+
+	pcode = sti_cpufreq_fetch_regmap_field(reg_fields,
+					       hw_info_offset,
+					       PCODE);
+	if (pcode < 0) {
+		dev_warn(dev, "Failed to obtain process code\n");
+		/* Use default pcode */
+		pcode = 0;
+	}
+
+	substrate = sti_cpufreq_fetch_regmap_field(reg_fields,
+						   hw_info_offset,
+						   SUBSTRATE);
+	if (substrate) {
+		dev_warn(dev, "Failed to obtain substrate code\n");
+		/* Use default substrate */
+		substrate = DEFAULT_VERSION;
+	}
+
+use_defaults:
+	major = sti_cpufreq_fetch_major();
+	if (major < 0) {
+		dev_err(dev, "Failed to obtain major version\n");
+		/* Use default major number */
+		major = DEFAULT_VERSION;
+	}
+
+	minor = sti_cpufreq_fetch_minor();
+	if (minor < 0) {
+		dev_err(dev, "Failed to obtain minor version\n");
+		/* Use default minor number */
+		minor = DEFAULT_VERSION;
+	}
+
+	snprintf(name, MAX_PCODE_NAME_LEN, "pcode%d", pcode);
+
+	opp_table = dev_pm_opp_set_prop_name(dev, name);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "Failed to set prop name\n");
+		return PTR_ERR(opp_table);
+	}
+
+	version[0] = BIT(major);
+	version[1] = BIT(minor);
+	version[2] = BIT(substrate);
+
+	opp_table = dev_pm_opp_set_supported_hw(dev, version, VERSION_ELEMENTS);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "Failed to set supported hardware\n");
+		return PTR_ERR(opp_table);
+	}
+
+	dev_dbg(dev, "pcode: %d major: %d minor: %d substrate: %d\n",
+		pcode, major, minor, substrate);
+	dev_dbg(dev, "version[0]: %x version[1]: %x version[2]: %x\n",
+		version[0], version[1], version[2]);
+
+	return 0;
+}
+
+static int sti_cpufreq_fetch_syscon_registers(void)
+{
+	struct device *dev = ddata.cpu;
+	struct device_node *np = dev->of_node;
+
+	ddata.syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(ddata.syscfg)) {
+		dev_err(dev,  "\"st,syscfg\" not supplied\n");
+		return PTR_ERR(ddata.syscfg);
+	}
+
+	ddata.syscfg_eng = syscon_regmap_lookup_by_phandle(np, "st,syscfg-eng");
+	if (IS_ERR(ddata.syscfg_eng)) {
+		dev_err(dev, "\"st,syscfg-eng\" not supplied\n");
+		return PTR_ERR(ddata.syscfg_eng);
+	}
+
+	return 0;
+}
+
+static int sti_cpufreq_init(void)
+{
+	int ret;
+
+	if ((!of_machine_is_compatible("st,stih407")) &&
+		(!of_machine_is_compatible("st,stih410")))
+		return -ENODEV;
+
+	ddata.cpu = get_cpu_device(0);
+	if (!ddata.cpu) {
+		dev_err(ddata.cpu, "Failed to get device for CPU0\n");
+		goto skip_voltage_scaling;
+	}
+
+	if (!of_get_property(ddata.cpu->of_node, "operating-points-v2", NULL)) {
+		dev_err(ddata.cpu, "OPP-v2 not supported\n");
+		goto skip_voltage_scaling;
+	}
+
+	ret = sti_cpufreq_fetch_syscon_registers();
+	if (ret)
+		goto skip_voltage_scaling;
+
+	ret = sti_cpufreq_set_opp_info();
+	if (!ret)
+		goto register_cpufreq_dt;
+
+skip_voltage_scaling:
+	dev_err(ddata.cpu, "Not doing voltage scaling\n");
+
+register_cpufreq_dt:
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+	return 0;
+}
+module_init(sti_cpufreq_init);
+
+MODULE_DESCRIPTION("STMicroelectronics CPUFreq/OPP driver");
+MODULE_AUTHOR("Ajitpal Singh <ajitpal.singh@st.com>");
+MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/tango-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/tango-cpufreq.c
new file mode 100644
index 0000000..89a7f86
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/tango-cpufreq.c
@@ -0,0 +1,38 @@
+#include <linux/of.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+
+static const struct of_device_id machines[] __initconst = {
+	{ .compatible = "sigma,tango4" },
+	{ /* sentinel */ }
+};
+
+static int __init tango_cpufreq_init(void)
+{
+	struct device *cpu_dev = get_cpu_device(0);
+	unsigned long max_freq;
+	struct clk *cpu_clk;
+	void *res;
+
+	if (!of_match_node(machines, of_root))
+		return -ENODEV;
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk))
+		return -ENODEV;
+
+	max_freq = clk_get_rate(cpu_clk);
+
+	dev_pm_opp_add(cpu_dev, max_freq / 1, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 2, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 3, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 5, 0);
+	dev_pm_opp_add(cpu_dev, max_freq / 9, 0);
+
+	res = platform_device_register_data(NULL, "cpufreq-dt", -1, NULL, 0);
+
+	return PTR_ERR_OR_ZERO(res);
+}
+device_initcall(tango_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/tegra124-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/tegra124-cpufreq.c
new file mode 100644
index 0000000..4bb154f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/tegra124-cpufreq.c
@@ -0,0 +1,209 @@
+/*
+ * Tegra 124 cpufreq driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+struct tegra124_cpufreq_priv {
+	struct regulator *vdd_cpu_reg;
+	struct clk *cpu_clk;
+	struct clk *pllp_clk;
+	struct clk *pllx_clk;
+	struct clk *dfll_clk;
+	struct platform_device *cpufreq_dt_pdev;
+};
+
+static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv)
+{
+	struct clk *orig_parent;
+	int ret;
+
+	ret = clk_set_rate(priv->dfll_clk, clk_get_rate(priv->cpu_clk));
+	if (ret)
+		return ret;
+
+	orig_parent = clk_get_parent(priv->cpu_clk);
+	clk_set_parent(priv->cpu_clk, priv->pllp_clk);
+
+	ret = clk_prepare_enable(priv->dfll_clk);
+	if (ret)
+		goto out;
+
+	clk_set_parent(priv->cpu_clk, priv->dfll_clk);
+
+	return 0;
+
+out:
+	clk_set_parent(priv->cpu_clk, orig_parent);
+
+	return ret;
+}
+
+static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
+{
+	clk_set_parent(priv->cpu_clk, priv->pllp_clk);
+	clk_disable_unprepare(priv->dfll_clk);
+	regulator_sync_voltage(priv->vdd_cpu_reg);
+	clk_set_parent(priv->cpu_clk, priv->pllx_clk);
+}
+
+static int tegra124_cpufreq_probe(struct platform_device *pdev)
+{
+	struct tegra124_cpufreq_priv *priv;
+	struct device_node *np;
+	struct device *cpu_dev;
+	struct platform_device_info cpufreq_dt_devinfo = {};
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = of_cpu_device_node_get(0);
+	if (!np)
+		return -ENODEV;
+
+	priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu");
+	if (IS_ERR(priv->vdd_cpu_reg)) {
+		ret = PTR_ERR(priv->vdd_cpu_reg);
+		goto out_put_np;
+	}
+
+	priv->cpu_clk = of_clk_get_by_name(np, "cpu_g");
+	if (IS_ERR(priv->cpu_clk)) {
+		ret = PTR_ERR(priv->cpu_clk);
+		goto out_put_vdd_cpu_reg;
+	}
+
+	priv->dfll_clk = of_clk_get_by_name(np, "dfll");
+	if (IS_ERR(priv->dfll_clk)) {
+		ret = PTR_ERR(priv->dfll_clk);
+		goto out_put_cpu_clk;
+	}
+
+	priv->pllx_clk = of_clk_get_by_name(np, "pll_x");
+	if (IS_ERR(priv->pllx_clk)) {
+		ret = PTR_ERR(priv->pllx_clk);
+		goto out_put_dfll_clk;
+	}
+
+	priv->pllp_clk = of_clk_get_by_name(np, "pll_p");
+	if (IS_ERR(priv->pllp_clk)) {
+		ret = PTR_ERR(priv->pllp_clk);
+		goto out_put_pllx_clk;
+	}
+
+	ret = tegra124_cpu_switch_to_dfll(priv);
+	if (ret)
+		goto out_put_pllp_clk;
+
+	cpufreq_dt_devinfo.name = "cpufreq-dt";
+	cpufreq_dt_devinfo.parent = &pdev->dev;
+
+	priv->cpufreq_dt_pdev =
+		platform_device_register_full(&cpufreq_dt_devinfo);
+	if (IS_ERR(priv->cpufreq_dt_pdev)) {
+		ret = PTR_ERR(priv->cpufreq_dt_pdev);
+		goto out_switch_to_pllx;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	of_node_put(np);
+
+	return 0;
+
+out_switch_to_pllx:
+	tegra124_cpu_switch_to_pllx(priv);
+out_put_pllp_clk:
+	clk_put(priv->pllp_clk);
+out_put_pllx_clk:
+	clk_put(priv->pllx_clk);
+out_put_dfll_clk:
+	clk_put(priv->dfll_clk);
+out_put_cpu_clk:
+	clk_put(priv->cpu_clk);
+out_put_vdd_cpu_reg:
+	regulator_put(priv->vdd_cpu_reg);
+out_put_np:
+	of_node_put(np);
+
+	return ret;
+}
+
+static int tegra124_cpufreq_remove(struct platform_device *pdev)
+{
+	struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev);
+
+	platform_device_unregister(priv->cpufreq_dt_pdev);
+	tegra124_cpu_switch_to_pllx(priv);
+
+	clk_put(priv->pllp_clk);
+	clk_put(priv->pllx_clk);
+	clk_put(priv->dfll_clk);
+	clk_put(priv->cpu_clk);
+	regulator_put(priv->vdd_cpu_reg);
+
+	return 0;
+}
+
+static struct platform_driver tegra124_cpufreq_platdrv = {
+	.driver.name	= "cpufreq-tegra124",
+	.probe		= tegra124_cpufreq_probe,
+	.remove		= tegra124_cpufreq_remove,
+};
+
+static int __init tegra_cpufreq_init(void)
+{
+	int ret;
+	struct platform_device *pdev;
+
+	if (!of_machine_is_compatible("nvidia,tegra124"))
+		return -ENODEV;
+
+	/*
+	 * Platform driver+device required for handling EPROBE_DEFER with
+	 * the regulator and the DFLL clock
+	 */
+	ret = platform_driver_register(&tegra124_cpufreq_platdrv);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&tegra124_cpufreq_platdrv);
+		return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+module_init(tegra_cpufreq_init);
+
+MODULE_AUTHOR("Tuomas Tynkkynen <ttynkkynen@nvidia.com>");
+MODULE_DESCRIPTION("cpufreq driver for NVIDIA Tegra124");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/tegra186-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/tegra186-cpufreq.c
new file mode 100644
index 0000000..fe78753
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/tegra186-cpufreq.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+
+#define EDVD_CORE_VOLT_FREQ(core)		(0x20 + (core) * 0x4)
+#define EDVD_CORE_VOLT_FREQ_F_SHIFT		0
+#define EDVD_CORE_VOLT_FREQ_V_SHIFT		16
+
+struct tegra186_cpufreq_cluster_info {
+	unsigned long offset;
+	int cpus[4];
+	unsigned int bpmp_cluster_id;
+};
+
+#define NO_CPU -1
+static const struct tegra186_cpufreq_cluster_info tegra186_clusters[] = {
+	/* Denver cluster */
+	{
+		.offset = SZ_64K * 7,
+		.cpus = { 1, 2, NO_CPU, NO_CPU },
+		.bpmp_cluster_id = 0,
+	},
+	/* A57 cluster */
+	{
+		.offset = SZ_64K * 6,
+		.cpus = { 0, 3, 4, 5 },
+		.bpmp_cluster_id = 1,
+	},
+};
+
+struct tegra186_cpufreq_cluster {
+	const struct tegra186_cpufreq_cluster_info *info;
+	struct cpufreq_frequency_table *table;
+};
+
+struct tegra186_cpufreq_data {
+	void __iomem *regs;
+
+	size_t num_clusters;
+	struct tegra186_cpufreq_cluster *clusters;
+};
+
+static int tegra186_cpufreq_init(struct cpufreq_policy *policy)
+{
+	struct tegra186_cpufreq_data *data = cpufreq_get_driver_data();
+	unsigned int i;
+
+	for (i = 0; i < data->num_clusters; i++) {
+		struct tegra186_cpufreq_cluster *cluster = &data->clusters[i];
+		const struct tegra186_cpufreq_cluster_info *info =
+			cluster->info;
+		int core;
+
+		for (core = 0; core < ARRAY_SIZE(info->cpus); core++) {
+			if (info->cpus[core] == policy->cpu)
+				break;
+		}
+		if (core == ARRAY_SIZE(info->cpus))
+			continue;
+
+		policy->driver_data =
+			data->regs + info->offset + EDVD_CORE_VOLT_FREQ(core);
+		cpufreq_table_validate_and_show(policy, cluster->table);
+	}
+
+	policy->cpuinfo.transition_latency = 300 * 1000;
+
+	return 0;
+}
+
+static int tegra186_cpufreq_set_target(struct cpufreq_policy *policy,
+				       unsigned int index)
+{
+	struct cpufreq_frequency_table *tbl = policy->freq_table + index;
+	void __iomem *edvd_reg = policy->driver_data;
+	u32 edvd_val = tbl->driver_data;
+
+	writel(edvd_val, edvd_reg);
+
+	return 0;
+}
+
+static struct cpufreq_driver tegra186_cpufreq_driver = {
+	.name = "tegra186",
+	.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+	.verify = cpufreq_generic_frequency_table_verify,
+	.target_index = tegra186_cpufreq_set_target,
+	.init = tegra186_cpufreq_init,
+	.attr = cpufreq_generic_attr,
+};
+
+static struct cpufreq_frequency_table *init_vhint_table(
+	struct platform_device *pdev, struct tegra_bpmp *bpmp,
+	unsigned int cluster_id)
+{
+	struct cpufreq_frequency_table *table;
+	struct mrq_cpu_vhint_request req;
+	struct tegra_bpmp_message msg;
+	struct cpu_vhint_data *data;
+	int err, i, j, num_rates = 0;
+	dma_addr_t phys;
+	void *virt;
+
+	virt = dma_alloc_coherent(bpmp->dev, sizeof(*data), &phys,
+				  GFP_KERNEL | GFP_DMA32);
+	if (!virt)
+		return ERR_PTR(-ENOMEM);
+
+	data = (struct cpu_vhint_data *)virt;
+
+	memset(&req, 0, sizeof(req));
+	req.addr = phys;
+	req.cluster_id = cluster_id;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_CPU_VHINT;
+	msg.tx.data = &req;
+	msg.tx.size = sizeof(req);
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err) {
+		table = ERR_PTR(err);
+		goto free;
+	}
+
+	for (i = data->vfloor; i <= data->vceil; i++) {
+		u16 ndiv = data->ndiv[i];
+
+		if (ndiv < data->ndiv_min || ndiv > data->ndiv_max)
+			continue;
+
+		/* Only store lowest voltage index for each rate */
+		if (i > 0 && ndiv == data->ndiv[i - 1])
+			continue;
+
+		num_rates++;
+	}
+
+	table = devm_kcalloc(&pdev->dev, num_rates + 1, sizeof(*table),
+			     GFP_KERNEL);
+	if (!table) {
+		table = ERR_PTR(-ENOMEM);
+		goto free;
+	}
+
+	for (i = data->vfloor, j = 0; i <= data->vceil; i++) {
+		struct cpufreq_frequency_table *point;
+		u16 ndiv = data->ndiv[i];
+		u32 edvd_val = 0;
+
+		if (ndiv < data->ndiv_min || ndiv > data->ndiv_max)
+			continue;
+
+		/* Only store lowest voltage index for each rate */
+		if (i > 0 && ndiv == data->ndiv[i - 1])
+			continue;
+
+		edvd_val |= i << EDVD_CORE_VOLT_FREQ_V_SHIFT;
+		edvd_val |= ndiv << EDVD_CORE_VOLT_FREQ_F_SHIFT;
+
+		point = &table[j++];
+		point->driver_data = edvd_val;
+		point->frequency = data->ref_clk_hz * ndiv / data->pdiv /
+			data->mdiv / 1000;
+	}
+
+	table[j].frequency = CPUFREQ_TABLE_END;
+
+free:
+	dma_free_coherent(bpmp->dev, sizeof(*data), virt, phys);
+
+	return table;
+}
+
+static int tegra186_cpufreq_probe(struct platform_device *pdev)
+{
+	struct tegra186_cpufreq_data *data;
+	struct tegra_bpmp *bpmp;
+	struct resource *res;
+	unsigned int i = 0, err;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clusters = devm_kcalloc(&pdev->dev, ARRAY_SIZE(tegra186_clusters),
+				      sizeof(*data->clusters), GFP_KERNEL);
+	if (!data->clusters)
+		return -ENOMEM;
+
+	data->num_clusters = ARRAY_SIZE(tegra186_clusters);
+
+	bpmp = tegra_bpmp_get(&pdev->dev);
+	if (IS_ERR(bpmp))
+		return PTR_ERR(bpmp);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->regs)) {
+		err = PTR_ERR(data->regs);
+		goto put_bpmp;
+	}
+
+	for (i = 0; i < data->num_clusters; i++) {
+		struct tegra186_cpufreq_cluster *cluster = &data->clusters[i];
+
+		cluster->info = &tegra186_clusters[i];
+		cluster->table = init_vhint_table(
+			pdev, bpmp, cluster->info->bpmp_cluster_id);
+		if (IS_ERR(cluster->table)) {
+			err = PTR_ERR(cluster->table);
+			goto put_bpmp;
+		}
+	}
+
+	tegra_bpmp_put(bpmp);
+
+	tegra186_cpufreq_driver.driver_data = data;
+
+	err = cpufreq_register_driver(&tegra186_cpufreq_driver);
+	if (err)
+		return err;
+
+	return 0;
+
+put_bpmp:
+	tegra_bpmp_put(bpmp);
+
+	return err;
+}
+
+static int tegra186_cpufreq_remove(struct platform_device *pdev)
+{
+	cpufreq_unregister_driver(&tegra186_cpufreq_driver);
+
+	return 0;
+}
+
+static const struct of_device_id tegra186_cpufreq_of_match[] = {
+	{ .compatible = "nvidia,tegra186-ccplex-cluster", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra186_cpufreq_of_match);
+
+static struct platform_driver tegra186_cpufreq_platform_driver = {
+	.driver = {
+		.name = "tegra186-cpufreq",
+		.of_match_table = tegra186_cpufreq_of_match,
+	},
+	.probe = tegra186_cpufreq_probe,
+	.remove = tegra186_cpufreq_remove,
+};
+module_platform_driver(tegra186_cpufreq_platform_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 cpufreq driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/tegra20-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/tegra20-cpufreq.c
new file mode 100644
index 0000000..2bd6284
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/tegra20-cpufreq.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+static struct cpufreq_frequency_table freq_table[] = {
+	{ .frequency = 216000 },
+	{ .frequency = 312000 },
+	{ .frequency = 456000 },
+	{ .frequency = 608000 },
+	{ .frequency = 760000 },
+	{ .frequency = 816000 },
+	{ .frequency = 912000 },
+	{ .frequency = 1000000 },
+	{ .frequency = CPUFREQ_TABLE_END },
+};
+
+#define NUM_CPUS	2
+
+static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
+static struct clk *emc_clk;
+static bool pll_x_prepared;
+
+static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
+					   unsigned int index)
+{
+	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
+
+	/*
+	 * Don't switch to intermediate freq if:
+	 * - we are already at it, i.e. policy->cur == ifreq
+	 * - index corresponds to ifreq
+	 */
+	if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq))
+		return 0;
+
+	return ifreq;
+}
+
+static int tegra_target_intermediate(struct cpufreq_policy *policy,
+				     unsigned int index)
+{
+	int ret;
+
+	/*
+	 * Take an extra reference to the main pll so it doesn't turn
+	 * off when we move the cpu off of it as enabling it again while we
+	 * switch to it from tegra_target() would take additional time.
+	 *
+	 * When target-freq is equal to intermediate freq we don't need to
+	 * switch to an intermediate freq and so this routine isn't called.
+	 * Also, we wouldn't be using pll_x anymore and must not take extra
+	 * reference to it, as it can be disabled now to save some power.
+	 */
+	clk_prepare_enable(pll_x_clk);
+
+	ret = clk_set_parent(cpu_clk, pll_p_clk);
+	if (ret)
+		clk_disable_unprepare(pll_x_clk);
+	else
+		pll_x_prepared = true;
+
+	return ret;
+}
+
+static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	unsigned long rate = freq_table[index].frequency;
+	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
+	int ret = 0;
+
+	/*
+	 * Vote on memory bus frequency based on cpu frequency
+	 * This sets the minimum frequency, display or avp may request higher
+	 */
+	if (rate >= 816000)
+		clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
+	else if (rate >= 456000)
+		clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
+	else
+		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
+
+	/*
+	 * target freq == pll_p, don't need to take extra reference to pll_x_clk
+	 * as it isn't used anymore.
+	 */
+	if (rate == ifreq)
+		return clk_set_parent(cpu_clk, pll_p_clk);
+
+	ret = clk_set_rate(pll_x_clk, rate * 1000);
+	/* Restore to earlier frequency on error, i.e. pll_x */
+	if (ret)
+		pr_err("Failed to change pll_x to %lu\n", rate);
+
+	ret = clk_set_parent(cpu_clk, pll_x_clk);
+	/* This shouldn't fail while changing or restoring */
+	WARN_ON(ret);
+
+	/*
+	 * Drop count to pll_x clock only if we switched to intermediate freq
+	 * earlier while transitioning to a target frequency.
+	 */
+	if (pll_x_prepared) {
+		clk_disable_unprepare(pll_x_clk);
+		pll_x_prepared = false;
+	}
+
+	return ret;
+}
+
+static int tegra_cpu_init(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	if (policy->cpu >= NUM_CPUS)
+		return -EINVAL;
+
+	clk_prepare_enable(emc_clk);
+	clk_prepare_enable(cpu_clk);
+
+	/* FIXME: what's the actual transition time? */
+	ret = cpufreq_generic_init(policy, freq_table, 300 * 1000);
+	if (ret) {
+		clk_disable_unprepare(cpu_clk);
+		clk_disable_unprepare(emc_clk);
+		return ret;
+	}
+
+	policy->clk = cpu_clk;
+	policy->suspend_freq = freq_table[0].frequency;
+	return 0;
+}
+
+static int tegra_cpu_exit(struct cpufreq_policy *policy)
+{
+	clk_disable_unprepare(cpu_clk);
+	clk_disable_unprepare(emc_clk);
+	return 0;
+}
+
+static struct cpufreq_driver tegra_cpufreq_driver = {
+	.flags			= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify			= cpufreq_generic_frequency_table_verify,
+	.get_intermediate	= tegra_get_intermediate,
+	.target_intermediate	= tegra_target_intermediate,
+	.target_index		= tegra_target,
+	.get			= cpufreq_generic_get,
+	.init			= tegra_cpu_init,
+	.exit			= tegra_cpu_exit,
+	.name			= "tegra",
+	.attr			= cpufreq_generic_attr,
+	.suspend		= cpufreq_generic_suspend,
+};
+
+static int __init tegra_cpufreq_init(void)
+{
+	cpu_clk = clk_get_sys(NULL, "cclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	pll_x_clk = clk_get_sys(NULL, "pll_x");
+	if (IS_ERR(pll_x_clk))
+		return PTR_ERR(pll_x_clk);
+
+	pll_p_clk = clk_get_sys(NULL, "pll_p");
+	if (IS_ERR(pll_p_clk))
+		return PTR_ERR(pll_p_clk);
+
+	emc_clk = clk_get_sys("cpu", "emc");
+	if (IS_ERR(emc_clk)) {
+		clk_put(cpu_clk);
+		return PTR_ERR(emc_clk);
+	}
+
+	return cpufreq_register_driver(&tegra_cpufreq_driver);
+}
+
+static void __exit tegra_cpufreq_exit(void)
+{
+        cpufreq_unregister_driver(&tegra_cpufreq_driver);
+	clk_put(emc_clk);
+	clk_put(cpu_clk);
+}
+
+
+MODULE_AUTHOR("Colin Cross <ccross@android.com>");
+MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
+MODULE_LICENSE("GPL");
+module_init(tegra_cpufreq_init);
+module_exit(tegra_cpufreq_exit);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/ti-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/ti-cpufreq.c
new file mode 100644
index 0000000..cadc324
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/ti-cpufreq.c
@@ -0,0 +1,269 @@
+/*
+ * TI CPUFreq/OPP hw-supported driver
+ *
+ * Copyright (C) 2016-2017 Texas Instruments, Inc.
+ *	 Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define REVISION_MASK				0xF
+#define REVISION_SHIFT				28
+
+#define AM33XX_800M_ARM_MPU_MAX_FREQ		0x1E2F
+#define AM43XX_600M_ARM_MPU_MAX_FREQ		0xFFA
+
+#define DRA7_EFUSE_HAS_OD_MPU_OPP		11
+#define DRA7_EFUSE_HAS_HIGH_MPU_OPP		15
+#define DRA7_EFUSE_HAS_ALL_MPU_OPP		23
+
+#define DRA7_EFUSE_NOM_MPU_OPP			BIT(0)
+#define DRA7_EFUSE_OD_MPU_OPP			BIT(1)
+#define DRA7_EFUSE_HIGH_MPU_OPP			BIT(2)
+
+#define VERSION_COUNT				2
+
+struct ti_cpufreq_data;
+
+struct ti_cpufreq_soc_data {
+	unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data,
+				     unsigned long efuse);
+	unsigned long efuse_fallback;
+	unsigned long efuse_offset;
+	unsigned long efuse_mask;
+	unsigned long efuse_shift;
+	unsigned long rev_offset;
+};
+
+struct ti_cpufreq_data {
+	struct device *cpu_dev;
+	struct device_node *opp_node;
+	struct regmap *syscon;
+	const struct ti_cpufreq_soc_data *soc_data;
+};
+
+static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
+				      unsigned long efuse)
+{
+	if (!efuse)
+		efuse = opp_data->soc_data->efuse_fallback;
+	/* AM335x and AM437x use "OPP disable" bits, so invert */
+	return ~efuse;
+}
+
+static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
+				      unsigned long efuse)
+{
+	unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP;
+
+	/*
+	 * The efuse on dra7 and am57 parts contains a specific
+	 * value indicating the highest available OPP.
+	 */
+
+	switch (efuse) {
+	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
+	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
+		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
+	case DRA7_EFUSE_HAS_OD_MPU_OPP:
+		calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP;
+	}
+
+	return calculated_efuse;
+}
+
+static struct ti_cpufreq_soc_data am3x_soc_data = {
+	.efuse_xlate = amx3_efuse_xlate,
+	.efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ,
+	.efuse_offset = 0x07fc,
+	.efuse_mask = 0x1fff,
+	.rev_offset = 0x600,
+};
+
+static struct ti_cpufreq_soc_data am4x_soc_data = {
+	.efuse_xlate = amx3_efuse_xlate,
+	.efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ,
+	.efuse_offset = 0x0610,
+	.efuse_mask = 0x3f,
+	.rev_offset = 0x600,
+};
+
+static struct ti_cpufreq_soc_data dra7_soc_data = {
+	.efuse_xlate = dra7_efuse_xlate,
+	.efuse_offset = 0x020c,
+	.efuse_mask = 0xf80000,
+	.efuse_shift = 19,
+	.rev_offset = 0x204,
+};
+
+/**
+ * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * @opp_data: pointer to ti_cpufreq_data context
+ * @efuse_value: Set to the value parsed from efuse
+ *
+ * Returns error code if efuse not read properly.
+ */
+static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
+				u32 *efuse_value)
+{
+	struct device *dev = opp_data->cpu_dev;
+	u32 efuse;
+	int ret;
+
+	ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
+			  &efuse);
+	if (ret) {
+		dev_err(dev,
+			"Failed to read the efuse value from syscon: %d\n",
+			ret);
+		return ret;
+	}
+
+	efuse = (efuse & opp_data->soc_data->efuse_mask);
+	efuse >>= opp_data->soc_data->efuse_shift;
+
+	*efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse);
+
+	return 0;
+}
+
+/**
+ * ti_cpufreq_get_rev() - Parse and return rev value present on SoC
+ * @opp_data: pointer to ti_cpufreq_data context
+ * @revision_value: Set to the value parsed from revision register
+ *
+ * Returns error code if revision not read properly.
+ */
+static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data,
+			      u32 *revision_value)
+{
+	struct device *dev = opp_data->cpu_dev;
+	u32 revision;
+	int ret;
+
+	ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset,
+			  &revision);
+	if (ret) {
+		dev_err(dev,
+			"Failed to read the revision number from syscon: %d\n",
+			ret);
+		return ret;
+	}
+
+	*revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK);
+
+	return 0;
+}
+
+static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data)
+{
+	struct device *dev = opp_data->cpu_dev;
+	struct device_node *np = opp_data->opp_node;
+
+	opp_data->syscon = syscon_regmap_lookup_by_phandle(np,
+							"syscon");
+	if (IS_ERR(opp_data->syscon)) {
+		dev_err(dev,
+			"\"syscon\" is missing, cannot use OPPv2 table.\n");
+		return PTR_ERR(opp_data->syscon);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ti_cpufreq_of_match[] = {
+	{ .compatible = "ti,am33xx", .data = &am3x_soc_data, },
+	{ .compatible = "ti,am43", .data = &am4x_soc_data, },
+	{ .compatible = "ti,dra7", .data = &dra7_soc_data },
+	{},
+};
+
+static int ti_cpufreq_init(void)
+{
+	u32 version[VERSION_COUNT];
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct ti_cpufreq_data *opp_data;
+	int ret;
+
+	np = of_find_node_by_path("/");
+	match = of_match_node(ti_cpufreq_of_match, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	opp_data = kzalloc(sizeof(*opp_data), GFP_KERNEL);
+	if (!opp_data)
+		return -ENOMEM;
+
+	opp_data->soc_data = match->data;
+
+	opp_data->cpu_dev = get_cpu_device(0);
+	if (!opp_data->cpu_dev) {
+		pr_err("%s: Failed to get device for CPU0\n", __func__);
+		return -ENODEV;
+	}
+
+	opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev);
+	if (!opp_data->opp_node) {
+		dev_info(opp_data->cpu_dev,
+			 "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n");
+		goto register_cpufreq_dt;
+	}
+
+	ret = ti_cpufreq_setup_syscon_register(opp_data);
+	if (ret)
+		goto fail_put_node;
+
+	/*
+	 * OPPs determine whether or not they are supported based on
+	 * two metrics:
+	 *	0 - SoC Revision
+	 *	1 - eFuse value
+	 */
+	ret = ti_cpufreq_get_rev(opp_data, &version[0]);
+	if (ret)
+		goto fail_put_node;
+
+	ret = ti_cpufreq_get_efuse(opp_data, &version[1]);
+	if (ret)
+		goto fail_put_node;
+
+	ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
+							  version, VERSION_COUNT));
+	if (ret) {
+		dev_err(opp_data->cpu_dev,
+			"Failed to set supported hardware\n");
+		goto fail_put_node;
+	}
+
+	of_node_put(opp_data->opp_node);
+
+register_cpufreq_dt:
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+	return 0;
+
+fail_put_node:
+	of_node_put(opp_data->opp_node);
+
+	return ret;
+}
+device_initcall(ti_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/unicore2-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/unicore2-cpufreq.c
new file mode 100644
index 0000000..db62d98
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/unicore2-cpufreq.c
@@ -0,0 +1,79 @@
+/*
+ * clock scaling for the UniCore-II
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+
+static struct cpufreq_driver ucv2_driver;
+
+/* make sure that only the "userspace" governor is run
+ * -- anything else wouldn't make sense on this platform, anyway.
+ */
+static int ucv2_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_cpu_limits(policy);
+	return 0;
+}
+
+static int ucv2_target(struct cpufreq_policy *policy,
+			 unsigned int target_freq,
+			 unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	int ret;
+
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	ret = clk_set_rate(policy->clk, target_freq * 1000);
+	cpufreq_freq_transition_end(policy, &freqs, ret);
+
+	return ret;
+}
+
+static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->min = policy->cpuinfo.min_freq = 250000;
+	policy->max = policy->cpuinfo.max_freq = 1000000;
+	policy->clk = clk_get(NULL, "MAIN_CLK");
+	return PTR_ERR_OR_ZERO(policy->clk);
+}
+
+static struct cpufreq_driver ucv2_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= ucv2_verify_speed,
+	.target		= ucv2_target,
+	.get		= cpufreq_generic_get,
+	.init		= ucv2_cpu_init,
+	.name		= "UniCore-II",
+};
+
+static int __init ucv2_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&ucv2_driver);
+}
+
+arch_initcall(ucv2_cpufreq_init);
diff --git a/src/kernel/linux/v4.14/drivers/cpufreq/vexpress-spc-cpufreq.c b/src/kernel/linux/v4.14/drivers/cpufreq/vexpress-spc-cpufreq.c
new file mode 100644
index 0000000..87e5bdc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -0,0 +1,71 @@
+/*
+ * Versatile Express SPC CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static int ve_spc_init_opp_table(const struct cpumask *cpumask)
+{
+	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
+	/*
+	 * platform specific SPC code must initialise the opp table
+	 * so just check if the OPP count is non-zero
+	 */
+	return dev_pm_opp_get_opp_count(cpu_dev) <= 0;
+}
+
+static int ve_spc_get_transition_latency(struct device *cpu_dev)
+{
+	return 1000000; /* 1 ms */
+}
+
+static struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = {
+	.name	= "vexpress-spc",
+	.get_transition_latency = ve_spc_get_transition_latency,
+	.init_opp_table = ve_spc_init_opp_table,
+};
+
+static int ve_spc_cpufreq_probe(struct platform_device *pdev)
+{
+	return bL_cpufreq_register(&ve_spc_cpufreq_ops);
+}
+
+static int ve_spc_cpufreq_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&ve_spc_cpufreq_ops);
+	return 0;
+}
+
+static struct platform_driver ve_spc_cpufreq_platdrv = {
+	.driver = {
+		.name	= "vexpress-spc-cpufreq",
+	},
+	.probe		= ve_spc_cpufreq_probe,
+	.remove		= ve_spc_cpufreq_remove,
+};
+module_platform_driver(ve_spc_cpufreq_platdrv);
+
+MODULE_LICENSE("GPL");