[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/crypto/nx/nx-842.h b/src/kernel/linux/v4.14/drivers/crypto/nx/nx-842.h
new file mode 100644
index 0000000..b66f19a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/crypto/nx/nx-842.h
@@ -0,0 +1,189 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __NX_842_H__
+#define __NX_842_H__
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/ratelimit.h>
+
+/* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers
+ *
+ * From NX P8 workbook, sec 4.9.1 "842 details"
+ * Each DDE buffer is 128 byte aligned
+ * Each DDE buffer size is a multiple of 32 bytes (except the last)
+ * The last DDE buffer size is a multiple of 8 bytes
+ */
+#define DDE_BUFFER_ALIGN (128)
+#define DDE_BUFFER_SIZE_MULT (32)
+#define DDE_BUFFER_LAST_MULT (8)
+
+/* Arbitrary DDL length limit
+ * Allows max buffer size of MAX-1 to MAX pages
+ * (depending on alignment)
+ */
+#define DDL_LEN_MAX (17)
+
+/* CCW 842 CI/FC masks
+ * NX P8 workbook, section 4.3.1, figure 4-6
+ * "CI/FC Boundary by NX CT type"
+ */
+#define CCW_CI_842 (0x00003ff8)
+#define CCW_FC_842 (0x00000007)
+
+/* CCW Function Codes (FC) for 842
+ * NX P8 workbook, section 4.9, table 4-28
+ * "Function Code Definitions for 842 Memory Compression"
+ */
+#define CCW_FC_842_COMP_NOCRC (0)
+#define CCW_FC_842_COMP_CRC (1)
+#define CCW_FC_842_DECOMP_NOCRC (2)
+#define CCW_FC_842_DECOMP_CRC (3)
+#define CCW_FC_842_MOVE (4)
+
+/* CSB CC Error Types for 842
+ * NX P8 workbook, section 4.10.3, table 4-30
+ * "Reported Error Types Summary Table"
+ */
+/* These are all duplicates of existing codes defined in icswx.h. */
+#define CSB_CC_TRANSLATION_DUP1 (80)
+#define CSB_CC_TRANSLATION_DUP2 (82)
+#define CSB_CC_TRANSLATION_DUP3 (84)
+#define CSB_CC_TRANSLATION_DUP4 (86)
+#define CSB_CC_TRANSLATION_DUP5 (92)
+#define CSB_CC_TRANSLATION_DUP6 (94)
+#define CSB_CC_PROTECTION_DUP1 (81)
+#define CSB_CC_PROTECTION_DUP2 (83)
+#define CSB_CC_PROTECTION_DUP3 (85)
+#define CSB_CC_PROTECTION_DUP4 (87)
+#define CSB_CC_PROTECTION_DUP5 (93)
+#define CSB_CC_PROTECTION_DUP6 (95)
+#define CSB_CC_RD_EXTERNAL_DUP1 (89)
+#define CSB_CC_RD_EXTERNAL_DUP2 (90)
+#define CSB_CC_RD_EXTERNAL_DUP3 (91)
+/* These are specific to NX */
+/* 842 codes */
+#define CSB_CC_TPBC_GT_SPBC (64) /* no error, but >1 comp ratio */
+#define CSB_CC_CRC_MISMATCH (65) /* decomp crc mismatch */
+#define CSB_CC_TEMPL_INVALID (66) /* decomp invalid template value */
+#define CSB_CC_TEMPL_OVERFLOW (67) /* decomp template shows data after end */
+/* sym crypt codes */
+#define CSB_CC_DECRYPT_OVERFLOW (64)
+/* asym crypt codes */
+#define CSB_CC_MINV_OVERFLOW (128)
+/*
+ * HW error - Job did not finish in the maximum time allowed.
+ * Job terminated.
+ */
+#define CSB_CC_HW_EXPIRED_TIMER (224)
+/* These are reserved for hypervisor use */
+#define CSB_CC_HYP_RESERVE_START (240)
+#define CSB_CC_HYP_RESERVE_END (253)
+#define CSB_CC_HYP_RESERVE_P9_END (251)
+/* No valid interrupt server (P9 or later). */
+#define CSB_CC_HYP_RESERVE_NO_INTR_SERVER (252)
+#define CSB_CC_HYP_NO_HW (254)
+#define CSB_CC_HYP_HANG_ABORTED (255)
+
+/* CCB Completion Modes (CM) for 842
+ * NX P8 workbook, section 4.3, figure 4-5
+ * "CRB Details - Normal Cop_Req (CL=00, C=1)"
+ */
+#define CCB_CM_EXTRA_WRITE (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE)
+#define CCB_CM_INTERRUPT (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT)
+
+#define LEN_ON_SIZE(pa, size) ((size) - ((pa) & ((size) - 1)))
+#define LEN_ON_PAGE(pa) LEN_ON_SIZE(pa, PAGE_SIZE)
+
+static inline unsigned long nx842_get_pa(void *addr)
+{
+ if (!is_vmalloc_addr(addr))
+ return __pa(addr);
+
+ return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr);
+}
+
+/**
+ * This provides the driver's constraints. Different nx842 implementations
+ * may have varying requirements. The constraints are:
+ * @alignment: All buffers should be aligned to this
+ * @multiple: All buffer lengths should be a multiple of this
+ * @minimum: Buffer lengths must not be less than this amount
+ * @maximum: Buffer lengths must not be more than this amount
+ *
+ * The constraints apply to all buffers and lengths, both input and output,
+ * for both compression and decompression, except for the minimum which
+ * only applies to compression input and decompression output; the
+ * compressed data can be less than the minimum constraint. It can be
+ * assumed that compressed data will always adhere to the multiple
+ * constraint.
+ *
+ * The driver may succeed even if these constraints are violated;
+ * however the driver can return failure or suffer reduced performance
+ * if any constraint is not met.
+ */
+struct nx842_constraints {
+ int alignment;
+ int multiple;
+ int minimum;
+ int maximum;
+};
+
+struct nx842_driver {
+ char *name;
+ struct module *owner;
+ size_t workmem_size;
+
+ struct nx842_constraints *constraints;
+
+ int (*compress)(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem);
+ int (*decompress)(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem);
+};
+
+struct nx842_crypto_header_group {
+ __be16 padding; /* unused bytes at start of group */
+ __be32 compressed_length; /* compressed bytes in group */
+ __be32 uncompressed_length; /* bytes after decompression */
+} __packed;
+
+struct nx842_crypto_header {
+ __be16 magic; /* NX842_CRYPTO_MAGIC */
+ __be16 ignore; /* decompressed end bytes to ignore */
+ u8 groups; /* total groups in this header */
+ struct nx842_crypto_header_group group[];
+} __packed;
+
+#define NX842_CRYPTO_GROUP_MAX (0x20)
+
+struct nx842_crypto_ctx {
+ spinlock_t lock;
+
+ u8 *wmem;
+ u8 *sbounce, *dbounce;
+
+ struct nx842_crypto_header header;
+ struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
+
+ struct nx842_driver *driver;
+};
+
+int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver);
+void nx842_crypto_exit(struct crypto_tfm *tfm);
+int nx842_crypto_compress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen);
+int nx842_crypto_decompress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen);
+
+#endif /* __NX_842_H__ */