[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/edac/i82443bxgx_edac.c b/src/kernel/linux/v4.14/drivers/edac/i82443bxgx_edac.c
new file mode 100644
index 0000000..a2ca929
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/edac/i82443bxgx_edac.c
@@ -0,0 +1,463 @@
+/*
+ * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
+ * module (C) 2006 Tim Small
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License.
+ *
+ * Written by Tim Small <tim@buttersideup.com>, based on work by Linux
+ * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
+ * others.
+ *
+ * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
+ *
+ * Written with reference to 82443BX Host Bridge Datasheet:
+ * http://download.intel.com/design/chipsets/datashts/29063301.pdf
+ * references to this document given in [].
+ *
+ * This module doesn't support the 440LX, but it may be possible to
+ * make it do so (the 440LX's register definitions are different, but
+ * not completely so - I haven't studied them in enough detail to know
+ * how easy this would be).
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "i82443bxgx_edac"
+
+/* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
+ * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
+ * rows" "The 82443BX supports multiple-bit error detection and
+ * single-bit error correction when ECC mode is enabled and
+ * single/multi-bit error detection when correction is disabled.
+ * During writes to the DRAM, the 82443BX generates ECC for the data
+ * on a QWord basis. Partial QWord writes require a read-modify-write
+ * cycle when ECC is enabled."
+*/
+
+/* "Additionally, the 82443BX ensures that the data is corrected in
+ * main memory so that accumulation of errors is prevented. Another
+ * error within the same QWord would result in a double-bit error
+ * which is unrecoverable. This is known as hardware scrubbing since
+ * it requires no software intervention to correct the data in memory."
+ */
+
+/* [Also see page 100 (section 4.3), "DRAM Interface"]
+ * [Also see page 112 (section 4.6.1.4), ECC]
+ */
+
+#define I82443BXGX_NR_CSROWS 8
+#define I82443BXGX_NR_CHANS 1
+#define I82443BXGX_NR_DIMMS 4
+
+/* 82443 PCI Device 0 */
+#define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI
+ * config space offset */
+#define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if
+ * row is non-ECC */
+#define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */
+
+#define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */
+#define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */
+#define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */
+#define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */
+#define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */
+
+#define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6
+
+/* 82443 PCI Device 0 */
+#define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI
+ * config space offset, Error Address
+ * Pointer Register */
+#define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */
+#define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */
+#define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC) */
+
+#define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI
+ * config space offset. */
+#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */
+#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */
+
+#define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI
+ * config space offset. */
+#define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */
+#define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */
+#define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */
+#define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */
+
+#define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI
+ * config space offset. */
+#define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */
+#define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */
+#define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */
+#define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */
+
+#define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI
+ * config space offset. */
+
+/* FIXME - don't poll when ECC disabled? */
+
+struct i82443bxgx_edacmc_error_info {
+ u32 eap;
+};
+
+static struct edac_pci_ctl_info *i82443bxgx_pci;
+
+static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
+ * already registered driver
+ */
+
+static int i82443bxgx_registered = 1;
+
+static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
+ struct i82443bxgx_edacmc_error_info
+ *info)
+{
+ struct pci_dev *pdev;
+ pdev = to_pci_dev(mci->pdev);
+ pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
+ if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
+ /* Clear error to allow next error to be reported [p.61] */
+ pci_write_bits32(pdev, I82443BXGX_EAP,
+ I82443BXGX_EAP_OFFSET_SBE,
+ I82443BXGX_EAP_OFFSET_SBE);
+
+ if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
+ /* Clear error to allow next error to be reported [p.61] */
+ pci_write_bits32(pdev, I82443BXGX_EAP,
+ I82443BXGX_EAP_OFFSET_MBE,
+ I82443BXGX_EAP_OFFSET_MBE);
+}
+
+static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
+ struct
+ i82443bxgx_edacmc_error_info
+ *info, int handle_errors)
+{
+ int error_found = 0;
+ u32 eapaddr, page, pageoffset;
+
+ /* bits 30:12 hold the 4kb block in which the error occurred
+ * [p.61] */
+ eapaddr = (info->eap & 0xfffff000);
+ page = eapaddr >> PAGE_SHIFT;
+ pageoffset = eapaddr - (page << PAGE_SHIFT);
+
+ if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
+ error_found = 1;
+ if (handle_errors)
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+ page, pageoffset, 0,
+ edac_mc_find_csrow_by_page(mci, page),
+ 0, -1, mci->ctl_name, "");
+ }
+
+ if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
+ error_found = 1;
+ if (handle_errors)
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ page, pageoffset, 0,
+ edac_mc_find_csrow_by_page(mci, page),
+ 0, -1, mci->ctl_name, "");
+ }
+
+ return error_found;
+}
+
+static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
+{
+ struct i82443bxgx_edacmc_error_info info;
+
+ edac_dbg(1, "MC%d\n", mci->mc_idx);
+ i82443bxgx_edacmc_get_error_info(mci, &info);
+ i82443bxgx_edacmc_process_error_info(mci, &info, 1);
+}
+
+static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
+ struct pci_dev *pdev,
+ enum edac_type edac_mode,
+ enum mem_type mtype)
+{
+ struct csrow_info *csrow;
+ struct dimm_info *dimm;
+ int index;
+ u8 drbar, dramc;
+ u32 row_base, row_high_limit, row_high_limit_last;
+
+ pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
+ row_high_limit_last = 0;
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = mci->csrows[index];
+ dimm = csrow->channels[0]->dimm;
+
+ pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
+ edac_dbg(1, "MC%d: Row=%d DRB = %#0x\n",
+ mci->mc_idx, index, drbar);
+ row_high_limit = ((u32) drbar << 23);
+ /* find the DRAM Chip Select Base address and mask */
+ edac_dbg(1, "MC%d: Row=%d, Boundary Address=%#0x, Last = %#0x\n",
+ mci->mc_idx, index, row_high_limit,
+ row_high_limit_last);
+
+ /* 440GX goes to 2GB, represented with a DRB of 0. */
+ if (row_high_limit_last && !row_high_limit)
+ row_high_limit = 1UL << 31;
+
+ /* This row is empty [p.49] */
+ if (row_high_limit == row_high_limit_last)
+ continue;
+ row_base = row_high_limit_last;
+ csrow->first_page = row_base >> PAGE_SHIFT;
+ csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+ dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
+ /* EAP reports in 4kilobyte granularity [61] */
+ dimm->grain = 1 << 12;
+ dimm->mtype = mtype;
+ /* I don't think 440BX can tell you device type? FIXME? */
+ dimm->dtype = DEV_UNKNOWN;
+ /* Mode is global to all rows on 440BX */
+ dimm->edac_mode = edac_mode;
+ row_high_limit_last = row_high_limit;
+ }
+}
+
+static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ u8 dramc;
+ u32 nbxcfg, ecc_mode;
+ enum mem_type mtype;
+ enum edac_type edac_mode;
+
+ edac_dbg(0, "MC:\n");
+
+ /* Something is really hosed if PCI config space reads from
+ * the MC aren't working.
+ */
+ if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
+ return -EIO;
+
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = I82443BXGX_NR_CSROWS;
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_CHANNEL;
+ layers[1].size = I82443BXGX_NR_CHANS;
+ layers[1].is_virt_csrow = false;
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+ if (mci == NULL)
+ return -ENOMEM;
+
+ edac_dbg(0, "MC: mci = %p\n", mci);
+ mci->pdev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+ pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
+ switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) {
+ case I82443BXGX_DRAMC_DRAM_IS_EDO:
+ mtype = MEM_EDO;
+ break;
+ case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
+ mtype = MEM_SDR;
+ break;
+ case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
+ mtype = MEM_RDR;
+ break;
+ default:
+ edac_dbg(0, "Unknown/reserved DRAM type value in DRAMC register!\n");
+ mtype = -MEM_UNKNOWN;
+ }
+
+ if ((mtype == MEM_SDR) || (mtype == MEM_RDR))
+ mci->edac_cap = mci->edac_ctl_cap;
+ else
+ mci->edac_cap = EDAC_FLAG_NONE;
+
+ mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+ pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
+ ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
+ (BIT(0) | BIT(1)));
+
+ mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
+ ? SCRUB_HW_SRC : SCRUB_NONE;
+
+ switch (ecc_mode) {
+ case I82443BXGX_NBXCFG_INTEGRITY_NONE:
+ edac_mode = EDAC_NONE;
+ break;
+ case I82443BXGX_NBXCFG_INTEGRITY_EC:
+ edac_mode = EDAC_EC;
+ break;
+ case I82443BXGX_NBXCFG_INTEGRITY_ECC:
+ case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
+ edac_mode = EDAC_SECDED;
+ break;
+ default:
+ edac_dbg(0, "Unknown/reserved ECC state in NBXCFG register!\n");
+ edac_mode = EDAC_UNKNOWN;
+ break;
+ }
+
+ i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
+
+ /* Many BIOSes don't clear error flags on boot, so do this
+ * here, or we get "phantom" errors occurring at module-load
+ * time. */
+ pci_write_bits32(pdev, I82443BXGX_EAP,
+ (I82443BXGX_EAP_OFFSET_SBE |
+ I82443BXGX_EAP_OFFSET_MBE),
+ (I82443BXGX_EAP_OFFSET_SBE |
+ I82443BXGX_EAP_OFFSET_MBE));
+
+ mci->mod_name = EDAC_MOD_STR;
+ mci->ctl_name = "I82443BXGX";
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i82443bxgx_edacmc_check;
+ mci->ctl_page_to_phys = NULL;
+
+ if (edac_mc_add_mc(mci)) {
+ edac_dbg(3, "failed edac_mc_add_mc()\n");
+ goto fail;
+ }
+
+ /* allocating generic PCI control info */
+ i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+ if (!i82443bxgx_pci) {
+ printk(KERN_WARNING
+ "%s(): Unable to create PCI control\n",
+ __func__);
+ printk(KERN_WARNING
+ "%s(): PCI error report via EDAC not setup\n",
+ __func__);
+ }
+
+ edac_dbg(3, "MC: success\n");
+ return 0;
+
+fail:
+ edac_mc_free(mci);
+ return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ edac_dbg(0, "MC:\n");
+
+ /* don't need to call pci_enable_device() */
+ rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
+
+ if (mci_pdev == NULL)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ edac_dbg(0, "\n");
+
+ if (i82443bxgx_pci)
+ edac_pci_release_generic_ctl(i82443bxgx_pci);
+
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+ return;
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82443bxgx_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
+ {0,} /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);
+
+static struct pci_driver i82443bxgx_edacmc_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i82443bxgx_edacmc_init_one,
+ .remove = i82443bxgx_edacmc_remove_one,
+ .id_table = i82443bxgx_pci_tbl,
+};
+
+static int __init i82443bxgx_edacmc_init(void)
+{
+ int pci_rc;
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (mci_pdev == NULL) {
+ const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
+ int i = 0;
+ i82443bxgx_registered = 0;
+
+ while (mci_pdev == NULL && id->vendor != 0) {
+ mci_pdev = pci_get_device(id->vendor,
+ id->device, NULL);
+ i++;
+ id = &i82443bxgx_pci_tbl[i];
+ }
+ if (!mci_pdev) {
+ edac_dbg(0, "i82443bxgx pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);
+
+ if (pci_rc < 0) {
+ edac_dbg(0, "i82443bxgx init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i82443bxgx_edacmc_driver);
+
+fail0:
+ pci_dev_put(mci_pdev);
+ return pci_rc;
+}
+
+static void __exit i82443bxgx_edacmc_exit(void)
+{
+ pci_unregister_driver(&i82443bxgx_edacmc_driver);
+
+ if (!i82443bxgx_registered)
+ i82443bxgx_edacmc_remove_one(mci_pdev);
+
+ pci_dev_put(mci_pdev);
+}
+
+module_init(i82443bxgx_edacmc_init);
+module_exit(i82443bxgx_edacmc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
+MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");