diff --git a/src/kernel/linux/v4.14/drivers/fpga/Kconfig b/src/kernel/linux/v4.14/drivers/fpga/Kconfig
new file mode 100644
index 0000000..57c41ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/Kconfig
@@ -0,0 +1,121 @@
+#
+# FPGA framework configuration
+#
+
+menuconfig FPGA
+	tristate "FPGA Configuration Framework"
+	help
+	  Say Y here if you want support for configuring FPGAs from the
+	  kernel.  The FPGA framework adds a FPGA manager class and FPGA
+	  manager drivers.
+
+if FPGA
+
+config FPGA_REGION
+	tristate "FPGA Region"
+	depends on OF && FPGA_BRIDGE
+	help
+	  FPGA Regions allow loading FPGA images under control of
+	  the Device Tree.
+
+config FPGA_MGR_ICE40_SPI
+	tristate "Lattice iCE40 SPI"
+	depends on OF && SPI
+	help
+	  FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
+
+config FPGA_MGR_ALTERA_CVP
+	tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+	depends on PCI
+	help
+	  FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
+	  and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+
+config FPGA_MGR_ALTERA_PS_SPI
+	tristate "Altera FPGA Passive Serial over SPI"
+	depends on SPI
+	select BITREVERSE
+	help
+	  FPGA manager driver support for Altera Arria/Cyclone/Stratix
+	  using the passive serial interface over SPI.
+
+config FPGA_MGR_SOCFPGA
+	tristate "Altera SOCFPGA FPGA Manager"
+	depends on ARCH_SOCFPGA || COMPILE_TEST
+	help
+	  FPGA manager driver support for Altera SOCFPGA.
+
+config FPGA_MGR_SOCFPGA_A10
+	tristate "Altera SoCFPGA Arria10"
+	depends on ARCH_SOCFPGA || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  FPGA manager driver support for Altera Arria10 SoCFPGA.
+
+config FPGA_MGR_TS73XX
+	tristate "Technologic Systems TS-73xx SBC FPGA Manager"
+	depends on ARCH_EP93XX && MACH_TS72XX
+	help
+	  FPGA manager driver support for the Altera Cyclone II FPGA
+	  present on the TS-73xx SBC boards.
+
+config FPGA_MGR_XILINX_SPI
+	tristate "Xilinx Configuration over Slave Serial (SPI)"
+	depends on SPI
+	help
+	  FPGA manager driver support for Xilinx FPGA configuration
+	  over slave serial interface.
+
+config FPGA_MGR_ZYNQ_FPGA
+	tristate "Xilinx Zynq FPGA"
+	depends on ARCH_ZYNQ || COMPILE_TEST
+	depends on HAS_DMA
+	help
+	  FPGA manager driver support for Xilinx Zynq FPGAs.
+
+config FPGA_BRIDGE
+	tristate "FPGA Bridge Framework"
+	depends on OF
+	help
+	  Say Y here if you want to support bridges connected between host
+	  processors and FPGAs or between FPGAs.
+
+config SOCFPGA_FPGA_BRIDGE
+	tristate "Altera SoCFPGA FPGA Bridges"
+	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	help
+	  Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
+	  devices.
+
+config ALTERA_FREEZE_BRIDGE
+	tristate "Altera FPGA Freeze Bridge"
+	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	help
+	  Say Y to enable drivers for Altera FPGA Freeze bridges.  A
+	  freeze bridge is a bridge that exists in the FPGA fabric to
+	  isolate one region of the FPGA from the busses while that
+	  region is being reprogrammed.
+
+config ALTERA_PR_IP_CORE
+        tristate "Altera Partial Reconfiguration IP Core"
+        help
+          Core driver support for Altera Partial Reconfiguration IP component
+
+config ALTERA_PR_IP_CORE_PLAT
+	tristate "Platform support of Altera Partial Reconfiguration IP Core"
+	depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM
+	help
+	  Platform driver support for Altera Partial Reconfiguration IP
+	  component
+
+config XILINX_PR_DECOUPLER
+	tristate "Xilinx LogiCORE PR Decoupler"
+	depends on FPGA_BRIDGE
+	depends on HAS_IOMEM
+	help
+	  Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
+	  The PR Decoupler exists in the FPGA fabric to isolate one
+	  region of the FPGA from the busses while that region is
+	  being reprogrammed during partial reconfig.
+
+endif # FPGA
diff --git a/src/kernel/linux/v4.14/drivers/fpga/Makefile b/src/kernel/linux/v4.14/drivers/fpga/Makefile
new file mode 100644
index 0000000..f98dcf1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/Makefile
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the fpga framework and fpga manager drivers.
+#
+
+# Core FPGA Manager Framework
+obj-$(CONFIG_FPGA)			+= fpga-mgr.o
+
+# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
+obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI)	+= altera-ps-spi.o
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
+obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
+obj-$(CONFIG_XILINX_PR_DECOUPLER)	+= xilinx-pr-decoupler.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-cvp.c b/src/kernel/linux/v4.14/drivers/fpga/altera-cvp.c
new file mode 100644
index 0000000..b7558ac
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-cvp.c
@@ -0,0 +1,509 @@
+/*
+ * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Manage Altera FPGA firmware using PCIe CvP.
+ * Firmware must be in binary "rbf" format.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sizes.h>
+
+#define CVP_BAR		0	/* BAR used for data transfer in memory mode */
+#define CVP_DUMMY_WR	244	/* dummy writes to clear CvP state machine */
+#define TIMEOUT_US	2000	/* CVP STATUS timeout for USERMODE polling */
+
+/* Vendor Specific Extended Capability Registers */
+#define VSE_PCIE_EXT_CAP_ID		0x200
+#define VSE_PCIE_EXT_CAP_ID_VAL		0x000b	/* 16bit */
+
+#define VSE_CVP_STATUS			0x21c	/* 32bit */
+#define VSE_CVP_STATUS_CFG_RDY		BIT(18)	/* CVP_CONFIG_READY */
+#define VSE_CVP_STATUS_CFG_ERR		BIT(19)	/* CVP_CONFIG_ERROR */
+#define VSE_CVP_STATUS_CVP_EN		BIT(20)	/* ctrl block is enabling CVP */
+#define VSE_CVP_STATUS_USERMODE		BIT(21)	/* USERMODE */
+#define VSE_CVP_STATUS_CFG_DONE		BIT(23)	/* CVP_CONFIG_DONE */
+#define VSE_CVP_STATUS_PLD_CLK_IN_USE	BIT(24)	/* PLD_CLK_IN_USE */
+
+#define VSE_CVP_MODE_CTRL		0x220	/* 32bit */
+#define VSE_CVP_MODE_CTRL_CVP_MODE	BIT(0)	/* CVP (1) or normal mode (0) */
+#define VSE_CVP_MODE_CTRL_HIP_CLK_SEL	BIT(1) /* PMA (1) or fabric clock (0) */
+#define VSE_CVP_MODE_CTRL_NUMCLKS_OFF	8	/* NUMCLKS bits offset */
+#define VSE_CVP_MODE_CTRL_NUMCLKS_MASK	GENMASK(15, 8)
+
+#define VSE_CVP_DATA			0x228	/* 32bit */
+#define VSE_CVP_PROG_CTRL		0x22c	/* 32bit */
+#define VSE_CVP_PROG_CTRL_CONFIG	BIT(0)
+#define VSE_CVP_PROG_CTRL_START_XFER	BIT(1)
+
+#define VSE_UNCOR_ERR_STATUS		0x234	/* 32bit */
+#define VSE_UNCOR_ERR_CVP_CFG_ERR	BIT(5)	/* CVP_CONFIG_ERROR_LATCHED */
+
+#define DRV_NAME		"altera-cvp"
+#define ALTERA_CVP_MGR_NAME	"Altera CvP FPGA Manager"
+
+/* Optional CvP config error status check for debugging */
+static bool altera_cvp_chkcfg;
+
+struct altera_cvp_conf {
+	struct fpga_manager	*mgr;
+	struct pci_dev		*pci_dev;
+	void __iomem		*map;
+	void			(*write_data)(struct altera_cvp_conf *, u32);
+	char			mgr_name[64];
+	u8			numclks;
+};
+
+static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 status;
+
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
+
+	if (status & VSE_CVP_STATUS_CFG_DONE)
+		return FPGA_MGR_STATE_OPERATING;
+
+	if (status & VSE_CVP_STATUS_CVP_EN)
+		return FPGA_MGR_STATE_POWER_UP;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
+{
+	writel(val, conf->map);
+}
+
+static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
+{
+	pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
+}
+
+/* switches between CvP clock and internal clock */
+static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
+{
+	unsigned int i;
+	u32 val;
+
+	/* set 1 CVP clock cycle for every CVP Data Register Write */
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+	val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+	pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
+
+	for (i = 0; i < CVP_DUMMY_WR; i++)
+		conf->write_data(conf, 0); /* dummy data, could be any value */
+}
+
+static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
+				  u32 status_val, int timeout_us)
+{
+	unsigned int retries;
+	u32 val;
+
+	retries = timeout_us / 10;
+	if (timeout_us % 10)
+		retries++;
+
+	do {
+		pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+		if ((val & status_mask) == status_val)
+			return 0;
+
+		/* use small usleep value to re-check and break early */
+		usleep_range(10, 11);
+	} while (--retries);
+
+	return -ETIMEDOUT;
+}
+
+static int altera_cvp_teardown(struct fpga_manager *mgr,
+			       struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int ret;
+	u32 val;
+
+	/* STEP 12 - reset START_XFER bit */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	val &= ~VSE_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 13 - reset CVP_CONFIG bit */
+	val &= ~VSE_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/*
+	 * STEP 14
+	 * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
+	 *   writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+
+	/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
+	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+	if (ret)
+		dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
+
+	return ret;
+}
+
+static int altera_cvp_write_init(struct fpga_manager *mgr,
+				 struct fpga_image_info *info,
+				 const char *buf, size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	u32 iflags, val;
+	int ret;
+
+	iflags = info ? info->flags : 0;
+
+	if (iflags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	/* Determine allowed clock to data ratio */
+	if (iflags & FPGA_MGR_COMPRESSED_BITSTREAM)
+		conf->numclks = 8; /* ratio for all compressed images */
+	else if (iflags & FPGA_MGR_ENCRYPTED_BITSTREAM)
+		conf->numclks = 4; /* for uncompressed and encrypted images */
+	else
+		conf->numclks = 1; /* for uncompressed and unencrypted images */
+
+	/* STEP 1 - read CVP status and check CVP_EN flag */
+	pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
+	if (!(val & VSE_CVP_STATUS_CVP_EN)) {
+		dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
+		return -ENODEV;
+	}
+
+	if (val & VSE_CVP_STATUS_CFG_RDY) {
+		dev_warn(&mgr->dev, "CvP already started, teardown first\n");
+		ret = altera_cvp_teardown(mgr, info);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * STEP 2
+	 * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
+	 */
+	/* switch from fabric to PMA clock */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/* set CVP mode */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val |= VSE_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/*
+	 * STEP 3
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf);
+
+	/* STEP 4 - set CVP_CONFIG bit */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	/* request control block to begin transfer using CVP */
+	val |= VSE_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
+				     VSE_CVP_STATUS_CFG_RDY, 10);
+	if (ret) {
+		dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+		return ret;
+	}
+
+	/*
+	 * STEP 6
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf);
+
+	/* STEP 7 - set START_XFER */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	val |= VSE_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+	val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	return 0;
+}
+
+static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 val;
+
+	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+	if (val & VSE_CVP_STATUS_CFG_ERR) {
+		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+			bytes);
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
+			    size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	const u32 *data;
+	size_t done, remaining;
+	int status = 0;
+	u32 mask;
+
+	/* STEP 9 - write 32-bit data from RBF file to CVP data register */
+	data = (u32 *)buf;
+	remaining = count;
+	done = 0;
+
+	while (remaining >= 4) {
+		conf->write_data(conf, *data++);
+		done += 4;
+		remaining -= 4;
+
+		/*
+		 * STEP 10 (optional) and STEP 11
+		 * - check error flag
+		 * - loop until data transfer completed
+		 * Config images can be huge (more than 40 MiB), so
+		 * only check after a new 4k data block has been written.
+		 * This reduces the number of checks and speeds up the
+		 * configuration process.
+		 */
+		if (altera_cvp_chkcfg && !(done % SZ_4K)) {
+			status = altera_cvp_chk_error(mgr, done);
+			if (status < 0)
+				return status;
+		}
+	}
+
+	/* write up to 3 trailing bytes, if any */
+	mask = BIT(remaining * 8) - 1;
+	if (mask)
+		conf->write_data(conf, *data & mask);
+
+	if (altera_cvp_chkcfg)
+		status = altera_cvp_chk_error(mgr, count);
+
+	return status;
+}
+
+static int altera_cvp_write_complete(struct fpga_manager *mgr,
+				     struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int ret;
+	u32 mask;
+	u32 val;
+
+	ret = altera_cvp_teardown(mgr, info);
+	if (ret)
+		return ret;
+
+	/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
+	pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
+	if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
+		dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
+		return -EPROTO;
+	}
+
+	/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
+	val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
+	mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
+	ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+	if (ret)
+		dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
+
+	return ret;
+}
+
+static const struct fpga_manager_ops altera_cvp_ops = {
+	.state		= altera_cvp_state,
+	.write_init	= altera_cvp_write_init,
+	.write		= altera_cvp_write,
+	.write_complete	= altera_cvp_write_complete,
+};
+
+static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
+{
+	return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
+}
+
+static ssize_t chkcfg_store(struct device_driver *drv, const char *buf,
+			    size_t count)
+{
+	int ret;
+
+	ret = kstrtobool(buf, &altera_cvp_chkcfg);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DRIVER_ATTR_RW(chkcfg);
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *dev_id);
+static void altera_cvp_remove(struct pci_dev *pdev);
+
+#define PCI_VENDOR_ID_ALTERA	0x1172
+
+static struct pci_device_id altera_cvp_id_tbl[] = {
+	{ PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
+
+static struct pci_driver altera_cvp_driver = {
+	.name   = DRV_NAME,
+	.id_table = altera_cvp_id_tbl,
+	.probe  = altera_cvp_probe,
+	.remove = altera_cvp_remove,
+};
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *dev_id)
+{
+	struct altera_cvp_conf *conf;
+	u16 cmd, val;
+	u32 regval;
+	int ret;
+
+	/*
+	 * First check if this is the expected FPGA device. PCI config
+	 * space access works without enabling the PCI device, memory
+	 * space access is enabled further down.
+	 */
+	pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
+	if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
+		dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
+		return -ENODEV;
+	}
+
+	pci_read_config_dword(pdev, VSE_CVP_STATUS, &regval);
+	if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
+		dev_err(&pdev->dev,
+			"CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
+			regval);
+		return -ENODEV;
+	}
+
+	conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf)
+		return -ENOMEM;
+
+	/*
+	 * Enable memory BAR access. We cannot use pci_enable_device() here
+	 * because it will make the driver unusable with FPGA devices that
+	 * have additional big IOMEM resources (e.g. 4GiB BARs) on 32-bit
+	 * platform. Such BARs will not have an assigned address range and
+	 * pci_enable_device() will fail, complaining about not claimed BAR,
+	 * even if the concerned BAR is not needed for FPGA configuration
+	 * at all. Thus, enable the device via PCI config space command.
+	 */
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if (!(cmd & PCI_COMMAND_MEMORY)) {
+		cmd |= PCI_COMMAND_MEMORY;
+		pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	}
+
+	ret = pci_request_region(pdev, CVP_BAR, "CVP");
+	if (ret) {
+		dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
+		goto err_disable;
+	}
+
+	conf->pci_dev = pdev;
+	conf->write_data = altera_cvp_write_data_iomem;
+
+	conf->map = pci_iomap(pdev, CVP_BAR, 0);
+	if (!conf->map) {
+		dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
+		conf->write_data = altera_cvp_write_data_config;
+	}
+
+	snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%s",
+		 ALTERA_CVP_MGR_NAME, pci_name(pdev));
+
+	ret = fpga_mgr_register(&pdev->dev, conf->mgr_name,
+				&altera_cvp_ops, conf);
+	if (ret)
+		goto err_unmap;
+
+	ret = driver_create_file(&altera_cvp_driver.driver,
+				 &driver_attr_chkcfg);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't create sysfs chkcfg file\n");
+		fpga_mgr_unregister(&pdev->dev);
+		goto err_unmap;
+	}
+
+	return 0;
+
+err_unmap:
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+err_disable:
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	return ret;
+}
+
+static void altera_cvp_remove(struct pci_dev *pdev)
+{
+	struct fpga_manager *mgr = pci_get_drvdata(pdev);
+	struct altera_cvp_conf *conf = mgr->priv;
+	u16 cmd;
+
+	driver_remove_file(&altera_cvp_driver.driver, &driver_attr_chkcfg);
+	fpga_mgr_unregister(&pdev->dev);
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+}
+
+module_pci_driver(altera_cvp_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-fpga2sdram.c b/src/kernel/linux/v4.14/drivers/fpga/altera-fpga2sdram.c
new file mode 100644
index 0000000..d4eeb74
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-fpga2sdram.c
@@ -0,0 +1,180 @@
+/*
+ * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages a bridge between an FPGA and the SDRAM used by the ARM
+ * host processor system (HPS).
+ *
+ * The bridge contains 4 read ports, 4 write ports, and 6 command ports.
+ * Reconfiguring these ports requires that no SDRAM transactions occur during
+ * reconfiguration.  The code reconfiguring the ports cannot run out of SDRAM
+ * nor can the FPGA access the SDRAM during reconfiguration.  This driver does
+ * not support reconfiguring the ports.  The ports are configured by code
+ * running out of on chip ram before Linux is started and the configuration
+ * is passed in a handoff register in the system manager.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration.  Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#define ALT_SDR_CTL_FPGAPORTRST_OFST		0x80
+#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK	0x00003fff
+#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT	0
+#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT	4
+#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT	8
+
+/*
+ * From the Cyclone V HPS Memory Map document:
+ *   These registers are used to store handoff information between the
+ *   preloader and the OS. These 8 registers can be used to store any
+ *   information. The contents of these registers have no impact on
+ *   the state of the HPS hardware.
+ */
+#define SYSMGR_ISWGRP_HANDOFF3          (0x8C)
+
+#define F2S_BRIDGE_NAME "fpga2sdram"
+
+struct alt_fpga2sdram_data {
+	struct device *dev;
+	struct regmap *sdrctl;
+	int mask;
+};
+
+static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
+{
+	struct alt_fpga2sdram_data *priv = bridge->priv;
+	int value;
+
+	regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
+
+	return (value & priv->mask) == priv->mask;
+}
+
+static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
+					     bool enable)
+{
+	return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
+				  priv->mask, enable ? priv->mask : 0);
+}
+
+static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+	return _alt_fpga2sdram_enable_set(bridge->priv, enable);
+}
+
+struct prop_map {
+	char *prop_name;
+	u32 *prop_value;
+	u32 prop_max;
+};
+
+static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
+	.enable_set = alt_fpga2sdram_enable_set,
+	.enable_show = alt_fpga2sdram_enable_show,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-fpga2sdram-bridge" },
+	{},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct alt_fpga2sdram_data *priv;
+	u32 enable;
+	struct regmap *sysmgr;
+	int ret = 0;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+	if (IS_ERR(priv->sdrctl)) {
+		dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
+		return PTR_ERR(priv->sdrctl);
+	}
+
+	sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
+	if (IS_ERR(sysmgr)) {
+		dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
+		return PTR_ERR(sysmgr);
+	}
+
+	/* Get f2s bridge configuration saved in handoff register */
+	regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
+
+	ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
+				   &altera_fpga2sdram_br_ops, priv);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
+
+	if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+		if (enable > 1) {
+			dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+		} else {
+			dev_info(dev, "%s bridge\n",
+				 (enable ? "enabling" : "disabling"));
+			ret = _alt_fpga2sdram_enable_set(priv, enable);
+			if (ret) {
+				fpga_bridge_unregister(&pdev->dev);
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+	fpga_bridge_unregister(&pdev->dev);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver altera_fpga_driver = {
+	.probe = alt_fpga_bridge_probe,
+	.remove = alt_fpga_bridge_remove,
+	.driver = {
+		.name	= "altera_fpga2sdram_bridge",
+		.of_match_table = of_match_ptr(altera_fpga_of_match),
+	},
+};
+
+module_platform_driver(altera_fpga_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-freeze-bridge.c b/src/kernel/linux/v4.14/drivers/fpga/altera-freeze-bridge.c
new file mode 100644
index 0000000..6159cfc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-freeze-bridge.c
@@ -0,0 +1,281 @@
+/*
+ * FPGA Freeze Bridge Controller
+ *
+ *  Copyright (C) 2016 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define FREEZE_CSR_STATUS_OFFSET		0
+#define FREEZE_CSR_CTRL_OFFSET			4
+#define FREEZE_CSR_ILLEGAL_REQ_OFFSET		8
+#define FREEZE_CSR_REG_VERSION			12
+
+#define FREEZE_CSR_SUPPORTED_VERSION		2
+#define FREEZE_CSR_OFFICIAL_VERSION		0xad000003
+
+#define FREEZE_CSR_STATUS_FREEZE_REQ_DONE	BIT(0)
+#define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE	BIT(1)
+
+#define FREEZE_CSR_CTRL_FREEZE_REQ		BIT(0)
+#define FREEZE_CSR_CTRL_RESET_REQ		BIT(1)
+#define FREEZE_CSR_CTRL_UNFREEZE_REQ		BIT(2)
+
+#define FREEZE_BRIDGE_NAME			"freeze"
+
+struct altera_freeze_br_data {
+	struct device *dev;
+	void __iomem *base_addr;
+	bool enable;
+};
+
+/*
+ * Poll status until status bit is set or we have a timeout.
+ */
+static int altera_freeze_br_req_ack(struct altera_freeze_br_data *priv,
+				    u32 timeout, u32 req_ack)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_illegal_req_addr = priv->base_addr +
+					     FREEZE_CSR_ILLEGAL_REQ_OFFSET;
+	u32 status, illegal, ctrl;
+	int ret = -ETIMEDOUT;
+
+	do {
+		illegal = readl(csr_illegal_req_addr);
+		if (illegal) {
+			dev_err(dev, "illegal request detected 0x%x", illegal);
+
+			writel(1, csr_illegal_req_addr);
+
+			illegal = readl(csr_illegal_req_addr);
+			if (illegal)
+				dev_err(dev, "illegal request not cleared 0x%x",
+					illegal);
+
+			ret = -EINVAL;
+			break;
+		}
+
+		status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+		dev_dbg(dev, "%s %x %x\n", __func__, status, req_ack);
+		status &= req_ack;
+		if (status) {
+			ctrl = readl(priv->base_addr + FREEZE_CSR_CTRL_OFFSET);
+			dev_dbg(dev, "%s request %x acknowledged %x %x\n",
+				__func__, req_ack, status, ctrl);
+			ret = 0;
+			break;
+		}
+
+		udelay(1);
+	} while (timeout--);
+
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "%s timeout waiting for 0x%x\n",
+			__func__, req_ack);
+
+	return ret;
+}
+
+static int altera_freeze_br_do_freeze(struct altera_freeze_br_data *priv,
+				      u32 timeout)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_ctrl_addr = priv->base_addr +
+				      FREEZE_CSR_CTRL_OFFSET;
+	u32 status;
+	int ret;
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	if (status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE) {
+		dev_dbg(dev, "%s bridge already disabled %d\n",
+			__func__, status);
+		return 0;
+	} else if (!(status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)) {
+		dev_err(dev, "%s bridge not enabled %d\n", __func__, status);
+		return -EINVAL;
+	}
+
+	writel(FREEZE_CSR_CTRL_FREEZE_REQ, csr_ctrl_addr);
+
+	ret = altera_freeze_br_req_ack(priv, timeout,
+				       FREEZE_CSR_STATUS_FREEZE_REQ_DONE);
+
+	if (ret)
+		writel(0, csr_ctrl_addr);
+	else
+		writel(FREEZE_CSR_CTRL_RESET_REQ, csr_ctrl_addr);
+
+	return ret;
+}
+
+static int altera_freeze_br_do_unfreeze(struct altera_freeze_br_data *priv,
+					u32 timeout)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_ctrl_addr = priv->base_addr +
+				      FREEZE_CSR_CTRL_OFFSET;
+	u32 status;
+	int ret;
+
+	writel(0, csr_ctrl_addr);
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) {
+		dev_dbg(dev, "%s bridge already enabled %d\n",
+			__func__, status);
+		return 0;
+	} else if (!(status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE)) {
+		dev_err(dev, "%s bridge not frozen %d\n", __func__, status);
+		return -EINVAL;
+	}
+
+	writel(FREEZE_CSR_CTRL_UNFREEZE_REQ, csr_ctrl_addr);
+
+	ret = altera_freeze_br_req_ack(priv, timeout,
+				       FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE);
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	writel(0, csr_ctrl_addr);
+
+	return ret;
+}
+
+/*
+ * enable = 1 : allow traffic through the bridge
+ * enable = 0 : disable traffic through the bridge
+ */
+static int altera_freeze_br_enable_set(struct fpga_bridge *bridge,
+				       bool enable)
+{
+	struct altera_freeze_br_data *priv = bridge->priv;
+	struct fpga_image_info *info = bridge->info;
+	u32 timeout = 0;
+	int ret;
+
+	if (enable) {
+		if (info)
+			timeout = info->enable_timeout_us;
+
+		ret = altera_freeze_br_do_unfreeze(bridge->priv, timeout);
+	} else {
+		if (info)
+			timeout = info->disable_timeout_us;
+
+		ret = altera_freeze_br_do_freeze(bridge->priv, timeout);
+	}
+
+	if (!ret)
+		priv->enable = enable;
+
+	return ret;
+}
+
+static int altera_freeze_br_enable_show(struct fpga_bridge *bridge)
+{
+	struct altera_freeze_br_data *priv = bridge->priv;
+
+	return priv->enable;
+}
+
+static const struct fpga_bridge_ops altera_freeze_br_br_ops = {
+	.enable_set = altera_freeze_br_enable_set,
+	.enable_show = altera_freeze_br_enable_show,
+};
+
+static const struct of_device_id altera_freeze_br_of_match[] = {
+	{ .compatible = "altr,freeze-bridge-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);
+
+static int altera_freeze_br_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *base_addr;
+	struct altera_freeze_br_data *priv;
+	struct resource *res;
+	u32 status, revision;
+
+	if (!np)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base_addr))
+		return PTR_ERR(base_addr);
+
+	revision = readl(base_addr + FREEZE_CSR_REG_VERSION);
+	if ((revision != FREEZE_CSR_SUPPORTED_VERSION) &&
+	    (revision != FREEZE_CSR_OFFICIAL_VERSION)) {
+		dev_err(dev,
+			"%s unexpected revision 0x%x != 0x%x != 0x%x\n",
+			__func__, revision, FREEZE_CSR_SUPPORTED_VERSION,
+			FREEZE_CSR_OFFICIAL_VERSION);
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	status = readl(base_addr + FREEZE_CSR_STATUS_OFFSET);
+	if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)
+		priv->enable = 1;
+
+	priv->base_addr = base_addr;
+
+	return fpga_bridge_register(dev, FREEZE_BRIDGE_NAME,
+				    &altera_freeze_br_br_ops, priv);
+}
+
+static int altera_freeze_br_remove(struct platform_device *pdev)
+{
+	fpga_bridge_unregister(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver altera_freeze_br_driver = {
+	.probe = altera_freeze_br_probe,
+	.remove = altera_freeze_br_remove,
+	.driver = {
+		.name	= "altera_freeze_br",
+		.of_match_table = of_match_ptr(altera_freeze_br_of_match),
+	},
+};
+
+module_platform_driver(altera_freeze_br_driver);
+
+MODULE_DESCRIPTION("Altera Freeze Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-hps2fpga.c b/src/kernel/linux/v4.14/drivers/fpga/altera-hps2fpga.c
new file mode 100644
index 0000000..406d2f1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-hps2fpga.c
@@ -0,0 +1,229 @@
+/*
+ * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * Includes this patch from the mailing list:
+ *   fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
+ *   Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages bridges on a Altera SOCFPGA between the ARM host
+ * processor system (HPS) and the embedded FPGA.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration.  Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/clk.h>
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define ALT_L3_REMAP_OFST			0x0
+#define ALT_L3_REMAP_MPUZERO_MSK		0x00000001
+#define ALT_L3_REMAP_H2F_MSK			0x00000008
+#define ALT_L3_REMAP_LWH2F_MSK			0x00000010
+
+#define HPS2FPGA_BRIDGE_NAME			"hps2fpga"
+#define LWHPS2FPGA_BRIDGE_NAME			"lwhps2fpga"
+#define FPGA2HPS_BRIDGE_NAME			"fpga2hps"
+
+struct altera_hps2fpga_data {
+	const char *name;
+	struct reset_control *bridge_reset;
+	struct regmap *l3reg;
+	unsigned int remap_mask;
+	struct clk *clk;
+};
+
+static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
+{
+	struct altera_hps2fpga_data *priv = bridge->priv;
+
+	return reset_control_status(priv->bridge_reset);
+}
+
+/* The L3 REMAP register is write only, so keep a cached value. */
+static unsigned int l3_remap_shadow;
+static DEFINE_SPINLOCK(l3_remap_lock);
+
+static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
+				    bool enable)
+{
+	unsigned long flags;
+	int ret;
+
+	/* bring bridge out of reset */
+	if (enable)
+		ret = reset_control_deassert(priv->bridge_reset);
+	else
+		ret = reset_control_assert(priv->bridge_reset);
+	if (ret)
+		return ret;
+
+	/* Allow bridge to be visible to L3 masters or not */
+	if (priv->remap_mask) {
+		spin_lock_irqsave(&l3_remap_lock, flags);
+		l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
+
+		if (enable)
+			l3_remap_shadow |= priv->remap_mask;
+		else
+			l3_remap_shadow &= ~priv->remap_mask;
+
+		ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
+				   l3_remap_shadow);
+		spin_unlock_irqrestore(&l3_remap_lock, flags);
+	}
+
+	return ret;
+}
+
+static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+	return _alt_hps2fpga_enable_set(bridge->priv, enable);
+}
+
+static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
+	.enable_set = alt_hps2fpga_enable_set,
+	.enable_show = alt_hps2fpga_enable_show,
+};
+
+static struct altera_hps2fpga_data hps2fpga_data  = {
+	.name = HPS2FPGA_BRIDGE_NAME,
+	.remap_mask = ALT_L3_REMAP_H2F_MSK,
+};
+
+static struct altera_hps2fpga_data lwhps2fpga_data  = {
+	.name = LWHPS2FPGA_BRIDGE_NAME,
+	.remap_mask = ALT_L3_REMAP_LWH2F_MSK,
+};
+
+static struct altera_hps2fpga_data fpga2hps_data  = {
+	.name = FPGA2HPS_BRIDGE_NAME,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-hps2fpga-bridge",
+	  .data = &hps2fpga_data },
+	{ .compatible = "altr,socfpga-lwhps2fpga-bridge",
+	  .data = &lwhps2fpga_data },
+	{ .compatible = "altr,socfpga-fpga2hps-bridge",
+	  .data = &fpga2hps_data },
+	{},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct altera_hps2fpga_data *priv;
+	const struct of_device_id *of_id;
+	u32 enable;
+	int ret;
+
+	of_id = of_match_device(altera_fpga_of_match, dev);
+	if (!of_id) {
+		dev_err(dev, "failed to match device\n");
+		return -ENODEV;
+	}
+
+	priv = (struct altera_hps2fpga_data *)of_id->data;
+
+	priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node,
+								     0);
+	if (IS_ERR(priv->bridge_reset)) {
+		dev_err(dev, "Could not get %s reset control\n", priv->name);
+		return PTR_ERR(priv->bridge_reset);
+	}
+
+	if (priv->remap_mask) {
+		priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
+		if (IS_ERR(priv->l3reg)) {
+			dev_err(dev, "regmap for altr,l3regs lookup failed\n");
+			return PTR_ERR(priv->l3reg);
+		}
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "no clock specified\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return -EBUSY;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+		if (enable > 1) {
+			dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+		} else {
+			dev_info(dev, "%s bridge\n",
+				 (enable ? "enabling" : "disabling"));
+
+			ret = _alt_hps2fpga_enable_set(priv, enable);
+			if (ret)
+				goto err;
+		}
+	}
+
+	ret = fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops,
+				   priv);
+err:
+	if (ret)
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+	struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+	struct altera_hps2fpga_data *priv = bridge->priv;
+
+	fpga_bridge_unregister(&pdev->dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver alt_fpga_bridge_driver = {
+	.probe = alt_fpga_bridge_probe,
+	.remove = alt_fpga_bridge_remove,
+	.driver = {
+		.name	= "altera_hps2fpga_bridge",
+		.of_match_table = of_match_ptr(altera_fpga_of_match),
+	},
+};
+
+module_platform_driver(alt_fpga_bridge_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core-plat.c b/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core-plat.c
new file mode 100644
index 0000000..8fb36b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core-plat.c
@@ -0,0 +1,68 @@
+/*
+ * Driver for Altera Partial Reconfiguration IP Core
+ *
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation
+ *  by Alan Tull <atull@opensource.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/fpga/altera-pr-ip-core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+static int alt_pr_platform_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *reg_base;
+	struct resource *res;
+
+	/* First mmio base is for register access */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	reg_base = devm_ioremap_resource(dev, res);
+
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	return alt_pr_register(dev, reg_base);
+}
+
+static int alt_pr_platform_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return alt_pr_unregister(dev);
+}
+
+static const struct of_device_id alt_pr_of_match[] = {
+	{ .compatible = "altr,a10-pr-ip", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, alt_pr_of_match);
+
+static struct platform_driver alt_pr_platform_driver = {
+	.probe = alt_pr_platform_probe,
+	.remove = alt_pr_platform_remove,
+	.driver = {
+		.name	= "alt_a10_pr_ip",
+		.of_match_table = alt_pr_of_match,
+	},
+};
+
+module_platform_driver(alt_pr_platform_driver);
+MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@linux.intel.com>");
+MODULE_DESCRIPTION("Altera Partial Reconfiguration IP Platform Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core.c b/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core.c
new file mode 100644
index 0000000..a7b31f9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-pr-ip-core.c
@@ -0,0 +1,220 @@
+/*
+ * Driver for Altera Partial Reconfiguration IP Core
+ *
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation
+ *  by Alan Tull <atull@opensource.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/fpga/altera-pr-ip-core.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/module.h>
+
+#define ALT_PR_DATA_OFST		0x00
+#define ALT_PR_CSR_OFST			0x04
+
+#define ALT_PR_CSR_PR_START		BIT(0)
+#define ALT_PR_CSR_STATUS_SFT		2
+#define ALT_PR_CSR_STATUS_MSK		(7 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_NRESET	(0 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_PR_ERR	(1 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_CRC_ERR	(2 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_BAD_BITS	(3 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_PR_IN_PROG	(4 << ALT_PR_CSR_STATUS_SFT)
+#define ALT_PR_CSR_STATUS_PR_SUCCESS	(5 << ALT_PR_CSR_STATUS_SFT)
+
+struct alt_pr_priv {
+	void __iomem *reg_base;
+};
+
+static enum fpga_mgr_states alt_pr_fpga_state(struct fpga_manager *mgr)
+{
+	struct alt_pr_priv *priv = mgr->priv;
+	const char *err = "unknown";
+	enum fpga_mgr_states ret = FPGA_MGR_STATE_UNKNOWN;
+	u32 val;
+
+	val = readl(priv->reg_base + ALT_PR_CSR_OFST);
+
+	val &= ALT_PR_CSR_STATUS_MSK;
+
+	switch (val) {
+	case ALT_PR_CSR_STATUS_NRESET:
+		return FPGA_MGR_STATE_RESET;
+
+	case ALT_PR_CSR_STATUS_PR_ERR:
+		err = "pr error";
+		ret = FPGA_MGR_STATE_WRITE_ERR;
+		break;
+
+	case ALT_PR_CSR_STATUS_CRC_ERR:
+		err = "crc error";
+		ret = FPGA_MGR_STATE_WRITE_ERR;
+		break;
+
+	case ALT_PR_CSR_STATUS_BAD_BITS:
+		err = "bad bits";
+		ret = FPGA_MGR_STATE_WRITE_ERR;
+		break;
+
+	case ALT_PR_CSR_STATUS_PR_IN_PROG:
+		return FPGA_MGR_STATE_WRITE;
+
+	case ALT_PR_CSR_STATUS_PR_SUCCESS:
+		return FPGA_MGR_STATE_OPERATING;
+
+	default:
+		break;
+	}
+
+	dev_err(&mgr->dev, "encountered error code %d (%s) in %s()\n",
+		val, err, __func__);
+	return ret;
+}
+
+static int alt_pr_fpga_write_init(struct fpga_manager *mgr,
+				  struct fpga_image_info *info,
+				  const char *buf, size_t count)
+{
+	struct alt_pr_priv *priv = mgr->priv;
+	u32 val;
+
+	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+		dev_err(&mgr->dev, "%s Partial Reconfiguration flag not set\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	val = readl(priv->reg_base + ALT_PR_CSR_OFST);
+
+	if (val & ALT_PR_CSR_PR_START) {
+		dev_err(&mgr->dev,
+			"%s Partial Reconfiguration already started\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	writel(val | ALT_PR_CSR_PR_START, priv->reg_base + ALT_PR_CSR_OFST);
+
+	return 0;
+}
+
+static int alt_pr_fpga_write(struct fpga_manager *mgr, const char *buf,
+			     size_t count)
+{
+	struct alt_pr_priv *priv = mgr->priv;
+	u32 *buffer_32 = (u32 *)buf;
+	size_t i = 0;
+
+	if (count <= 0)
+		return -EINVAL;
+
+	/* Write out the complete 32-bit chunks */
+	while (count >= sizeof(u32)) {
+		writel(buffer_32[i++], priv->reg_base);
+		count -= sizeof(u32);
+	}
+
+	/* Write out remaining non 32-bit chunks */
+	switch (count) {
+	case 3:
+		writel(buffer_32[i++] & 0x00ffffff, priv->reg_base);
+		break;
+	case 2:
+		writel(buffer_32[i++] & 0x0000ffff, priv->reg_base);
+		break;
+	case 1:
+		writel(buffer_32[i++] & 0x000000ff, priv->reg_base);
+		break;
+	case 0:
+		break;
+	default:
+		/* This will never happen */
+		return -EFAULT;
+	}
+
+	if (alt_pr_fpga_state(mgr) == FPGA_MGR_STATE_WRITE_ERR)
+		return -EIO;
+
+	return 0;
+}
+
+static int alt_pr_fpga_write_complete(struct fpga_manager *mgr,
+				      struct fpga_image_info *info)
+{
+	u32 i = 0;
+
+	do {
+		switch (alt_pr_fpga_state(mgr)) {
+		case FPGA_MGR_STATE_WRITE_ERR:
+			return -EIO;
+
+		case FPGA_MGR_STATE_OPERATING:
+			dev_info(&mgr->dev,
+				 "successful partial reconfiguration\n");
+			return 0;
+
+		default:
+			break;
+		}
+		udelay(1);
+	} while (info->config_complete_timeout_us > i++);
+
+	dev_err(&mgr->dev, "timed out waiting for write to complete\n");
+	return -ETIMEDOUT;
+}
+
+static const struct fpga_manager_ops alt_pr_ops = {
+	.state = alt_pr_fpga_state,
+	.write_init = alt_pr_fpga_write_init,
+	.write = alt_pr_fpga_write,
+	.write_complete = alt_pr_fpga_write_complete,
+};
+
+int alt_pr_register(struct device *dev, void __iomem *reg_base)
+{
+	struct alt_pr_priv *priv;
+	u32 val;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg_base = reg_base;
+
+	val = readl(priv->reg_base + ALT_PR_CSR_OFST);
+
+	dev_dbg(dev, "%s status=%d start=%d\n", __func__,
+		(val & ALT_PR_CSR_STATUS_MSK) >> ALT_PR_CSR_STATUS_SFT,
+		(int)(val & ALT_PR_CSR_PR_START));
+
+	return fpga_mgr_register(dev, dev_name(dev), &alt_pr_ops, priv);
+}
+EXPORT_SYMBOL_GPL(alt_pr_register);
+
+int alt_pr_unregister(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	fpga_mgr_unregister(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(alt_pr_unregister);
+
+MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@linux.intel.com>");
+MODULE_DESCRIPTION("Altera Partial Reconfiguration IP Core");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/altera-ps-spi.c b/src/kernel/linux/v4.14/drivers/fpga/altera-ps-spi.c
new file mode 100644
index 0000000..19b1cf8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/altera-ps-spi.c
@@ -0,0 +1,311 @@
+/*
+ * Altera Passive Serial SPI Driver
+ *
+ *  Copyright (c) 2017 United Western Technologies, Corporation
+ *
+ *  Joshua Clayton <stillcompiling@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Manage Altera FPGA firmware that is loaded over SPI using the passive
+ * serial configuration method.
+ * Firmware must be in binary "rbf" format.
+ * Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series.
+ * May work on other Altera FPGAs.
+ */
+
+#include <linux/bitrev.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/sizes.h>
+
+enum altera_ps_devtype {
+	CYCLONE5,
+	ARRIA10,
+};
+
+struct altera_ps_data {
+	enum altera_ps_devtype devtype;
+	int status_wait_min_us;
+	int status_wait_max_us;
+	int t_cfg_us;
+	int t_st2ck_us;
+};
+
+struct altera_ps_conf {
+	struct gpio_desc *config;
+	struct gpio_desc *confd;
+	struct gpio_desc *status;
+	struct spi_device *spi;
+	const struct altera_ps_data *data;
+	u32 info_flags;
+	char mgr_name[64];
+};
+
+/*          |   Arria 10  |   Cyclone5  |   Stratix5  |
+ * t_CF2ST0 |     [; 600] |     [; 600] |     [; 600] |ns
+ * t_CFG    |        [2;] |        [2;] |        [2;] |µs
+ * t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs
+ * t_CF2ST1 |    [; 3000] |    [; 1506] |    [; 1506] |µs
+ * t_CF2CK  |     [3010;] |     [1506;] |     [1506;] |µs
+ * t_ST2CK  |       [10;] |        [2;] |        [2;] |µs
+ * t_CD2UM  |  [175; 830] |  [175; 437] |  [175; 437] |µs
+ */
+static struct altera_ps_data c5_data = {
+	/* these values for Cyclone5 are compatible with Stratix5 */
+	.devtype = CYCLONE5,
+	.status_wait_min_us = 268,
+	.status_wait_max_us = 1506,
+	.t_cfg_us = 2,
+	.t_st2ck_us = 2,
+};
+
+static struct altera_ps_data a10_data = {
+	.devtype = ARRIA10,
+	.status_wait_min_us = 268,  /* min(t_STATUS) */
+	.status_wait_max_us = 3000, /* max(t_CF2ST1) */
+	.t_cfg_us = 2,    /* max { min(t_CFG), max(tCF2ST0) } */
+	.t_st2ck_us = 10, /* min(t_ST2CK) */
+};
+
+static const struct of_device_id of_ef_match[] = {
+	{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
+	{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_ef_match);
+
+static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+
+	if (gpiod_get_value_cansleep(conf->status))
+		return FPGA_MGR_STATE_RESET;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static inline void altera_ps_delay(int delay_us)
+{
+	if (delay_us > 10)
+		usleep_range(delay_us, delay_us + 5);
+	else
+		udelay(delay_us);
+}
+
+static int altera_ps_write_init(struct fpga_manager *mgr,
+				struct fpga_image_info *info,
+				const char *buf, size_t count)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	int min, max, waits;
+	int i;
+
+	conf->info_flags = info->flags;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	gpiod_set_value_cansleep(conf->config, 1);
+
+	/* wait min reset pulse time */
+	altera_ps_delay(conf->data->t_cfg_us);
+
+	if (!gpiod_get_value_cansleep(conf->status)) {
+		dev_err(&mgr->dev, "Status pin failed to show a reset\n");
+		return -EIO;
+	}
+
+	gpiod_set_value_cansleep(conf->config, 0);
+
+	min = conf->data->status_wait_min_us;
+	max = conf->data->status_wait_max_us;
+	waits = max / min;
+	if (max % min)
+		waits++;
+
+	/* wait for max { max(t_STATUS), max(t_CF2ST1) } */
+	for (i = 0; i < waits; i++) {
+		usleep_range(min, min + 10);
+		if (!gpiod_get_value_cansleep(conf->status)) {
+			/* wait for min(t_ST2CK)*/
+			altera_ps_delay(conf->data->t_st2ck_us);
+			return 0;
+		}
+	}
+
+	dev_err(&mgr->dev, "Status pin not ready.\n");
+	return -EIO;
+}
+
+static void rev_buf(char *buf, size_t len)
+{
+	u32 *fw32 = (u32 *)buf;
+	size_t extra_bytes = (len & 0x03);
+	const u32 *fw_end = (u32 *)(buf + len - extra_bytes);
+
+	/* set buffer to lsb first */
+	while (fw32 < fw_end) {
+		*fw32 = bitrev8x4(*fw32);
+		fw32++;
+	}
+
+	if (extra_bytes) {
+		buf = (char *)fw_end;
+		while (extra_bytes) {
+			*buf = bitrev8(*buf);
+			buf++;
+			extra_bytes--;
+		}
+	}
+}
+
+static int altera_ps_write(struct fpga_manager *mgr, const char *buf,
+			   size_t count)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	const char *fw_data = buf;
+	const char *fw_data_end = fw_data + count;
+
+	while (fw_data < fw_data_end) {
+		int ret;
+		size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K);
+
+		if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST))
+			rev_buf((char *)fw_data, stride);
+
+		ret = spi_write(conf->spi, fw_data, stride);
+		if (ret) {
+			dev_err(&mgr->dev, "spi error in firmware write: %d\n",
+				ret);
+			return ret;
+		}
+		fw_data += stride;
+	}
+
+	return 0;
+}
+
+static int altera_ps_write_complete(struct fpga_manager *mgr,
+				    struct fpga_image_info *info)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	const char dummy[] = {0};
+	int ret;
+
+	if (gpiod_get_value_cansleep(conf->status)) {
+		dev_err(&mgr->dev, "Error during configuration.\n");
+		return -EIO;
+	}
+
+	if (conf->confd) {
+		if (!gpiod_get_raw_value_cansleep(conf->confd)) {
+			dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
+			return -EIO;
+		}
+	}
+
+	/*
+	 * After CONF_DONE goes high, send two additional falling edges on DCLK
+	 * to begin initialization and enter user mode
+	 */
+	ret = spi_write(conf->spi, dummy, 1);
+	if (ret) {
+		dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct fpga_manager_ops altera_ps_ops = {
+	.state = altera_ps_state,
+	.write_init = altera_ps_write_init,
+	.write = altera_ps_write,
+	.write_complete = altera_ps_write_complete,
+};
+
+static int altera_ps_probe(struct spi_device *spi)
+{
+	struct altera_ps_conf *conf;
+	const struct of_device_id *of_id;
+
+	conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf)
+		return -ENOMEM;
+
+	of_id = of_match_device(of_ef_match, &spi->dev);
+	if (!of_id)
+		return -ENODEV;
+
+	conf->data = of_id->data;
+	conf->spi = spi;
+	conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
+	if (IS_ERR(conf->config)) {
+		dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
+			PTR_ERR(conf->config));
+		return PTR_ERR(conf->config);
+	}
+
+	conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN);
+	if (IS_ERR(conf->status)) {
+		dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
+			PTR_ERR(conf->status));
+		return PTR_ERR(conf->status);
+	}
+
+	conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN);
+	if (IS_ERR(conf->confd)) {
+		dev_err(&spi->dev, "Failed to get confd gpio: %ld\n",
+			PTR_ERR(conf->confd));
+		return PTR_ERR(conf->confd);
+	} else if (!conf->confd) {
+		dev_warn(&spi->dev, "Not using confd gpio");
+	}
+
+	/* Register manager with unique name */
+	snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s",
+		 dev_driver_string(&spi->dev), dev_name(&spi->dev));
+
+	return fpga_mgr_register(&spi->dev, conf->mgr_name,
+				 &altera_ps_ops, conf);
+}
+
+static int altera_ps_remove(struct spi_device *spi)
+{
+	fpga_mgr_unregister(&spi->dev);
+
+	return 0;
+}
+
+static const struct spi_device_id altera_ps_spi_ids[] = {
+	{"cyclone-ps-spi", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
+
+static struct spi_driver altera_ps_driver = {
+	.driver = {
+		.name = "altera-ps-spi",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_ef_match),
+	},
+	.id_table = altera_ps_spi_ids,
+	.probe = altera_ps_probe,
+	.remove = altera_ps_remove,
+};
+
+module_spi_driver(altera_ps_driver)
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
+MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/fpga-bridge.c b/src/kernel/linux/v4.14/drivers/fpga/fpga-bridge.c
new file mode 100644
index 0000000..9651aa5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/fpga-bridge.c
@@ -0,0 +1,388 @@
+/*
+ * FPGA Bridge Framework Driver
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_IDA(fpga_bridge_ida);
+static struct class *fpga_bridge_class;
+
+/* Lock for adding/removing bridges to linked lists*/
+static spinlock_t bridge_list_lock;
+
+static int fpga_bridge_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * fpga_bridge_enable - Enable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_enable(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "enable\n");
+
+	if (bridge->br_ops && bridge->br_ops->enable_set)
+		return bridge->br_ops->enable_set(bridge, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_enable);
+
+/**
+ * fpga_bridge_disable - Disable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_disable(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "disable\n");
+
+	if (bridge->br_ops && bridge->br_ops->enable_set)
+		return bridge->br_ops->enable_set(bridge, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_disable);
+
+/**
+ * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ *
+ * Return fpga_bridge struct if successful.
+ * Return -EBUSY if someone already has a reference to the bridge.
+ * Return -ENODEV if @np is not a FPGA Bridge.
+ */
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *np,
+				       struct fpga_image_info *info)
+
+{
+	struct device *dev;
+	struct fpga_bridge *bridge;
+	int ret = -ENODEV;
+
+	dev = class_find_device(fpga_bridge_class, NULL, np,
+				fpga_bridge_of_node_match);
+	if (!dev)
+		goto err_dev;
+
+	bridge = to_fpga_bridge(dev);
+	if (!bridge)
+		goto err_dev;
+
+	bridge->info = info;
+
+	if (!mutex_trylock(&bridge->mutex)) {
+		ret = -EBUSY;
+		goto err_dev;
+	}
+
+	if (!try_module_get(dev->parent->driver->owner))
+		goto err_ll_mod;
+
+	dev_dbg(&bridge->dev, "get\n");
+
+	return bridge;
+
+err_ll_mod:
+	mutex_unlock(&bridge->mutex);
+err_dev:
+	put_device(dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(of_fpga_bridge_get);
+
+/**
+ * fpga_bridge_put - release a reference to a bridge
+ *
+ * @bridge: FPGA bridge
+ */
+void fpga_bridge_put(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "put\n");
+
+	bridge->info = NULL;
+	module_put(bridge->dev.parent->driver->owner);
+	mutex_unlock(&bridge->mutex);
+	put_device(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_put);
+
+/**
+ * fpga_bridges_enable - enable bridges in a list
+ * @bridge_list: list of FPGA bridges
+ *
+ * Enable each bridge in the list.  If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_enable(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	int ret;
+
+	list_for_each_entry(bridge, bridge_list, node) {
+		ret = fpga_bridge_enable(bridge);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_enable);
+
+/**
+ * fpga_bridges_disable - disable bridges in a list
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * Disable each bridge in the list.  If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_disable(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	int ret;
+
+	list_for_each_entry(bridge, bridge_list, node) {
+		ret = fpga_bridge_disable(bridge);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_disable);
+
+/**
+ * fpga_bridges_put - put bridges
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * For each bridge in the list, put the bridge and remove it from the list.
+ * If list is empty, do nothing.
+ */
+void fpga_bridges_put(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge, *next;
+	unsigned long flags;
+
+	list_for_each_entry_safe(bridge, next, bridge_list, node) {
+		fpga_bridge_put(bridge);
+
+		spin_lock_irqsave(&bridge_list_lock, flags);
+		list_del(&bridge->node);
+		spin_unlock_irqrestore(&bridge_list_lock, flags);
+	}
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_put);
+
+/**
+ * fpga_bridges_get_to_list - get a bridge, add it to a list
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ * @bridge_list: list of FPGA bridges
+ *
+ * Get an exclusive reference to the bridge and and it to the list.
+ *
+ * Return 0 for success, error code from of_fpga_bridge_get() othewise.
+ */
+int fpga_bridge_get_to_list(struct device_node *np,
+			    struct fpga_image_info *info,
+			    struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	unsigned long flags;
+
+	bridge = of_fpga_bridge_get(np, info);
+	if (IS_ERR(bridge))
+		return PTR_ERR(bridge);
+
+	spin_lock_irqsave(&bridge_list_lock, flags);
+	list_add(&bridge->node, bridge_list);
+	spin_unlock_irqrestore(&bridge_list_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_get_to_list);
+
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+	return sprintf(buf, "%s\n", bridge->name);
+}
+
+static ssize_t state_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+	int enable = 1;
+
+	if (bridge->br_ops && bridge->br_ops->enable_show)
+		enable = bridge->br_ops->enable_show(bridge);
+
+	return sprintf(buf, "%s\n", enable ? "enabled" : "disabled");
+}
+
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *fpga_bridge_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_state.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(fpga_bridge);
+
+/**
+ * fpga_bridge_register - register a fpga bridge driver
+ * @dev:	FPGA bridge device from pdev
+ * @name:	FPGA bridge name
+ * @br_ops:	pointer to structure of fpga bridge ops
+ * @priv:	FPGA bridge private data
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_register(struct device *dev, const char *name,
+			 const struct fpga_bridge_ops *br_ops, void *priv)
+{
+	struct fpga_bridge *bridge;
+	int id, ret = 0;
+
+	if (!name || !strlen(name)) {
+		dev_err(dev, "Attempt to register with no name!\n");
+		return -EINVAL;
+	}
+
+	bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	id = ida_simple_get(&fpga_bridge_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto error_kfree;
+	}
+
+	mutex_init(&bridge->mutex);
+	INIT_LIST_HEAD(&bridge->node);
+
+	bridge->name = name;
+	bridge->br_ops = br_ops;
+	bridge->priv = priv;
+
+	device_initialize(&bridge->dev);
+	bridge->dev.class = fpga_bridge_class;
+	bridge->dev.parent = dev;
+	bridge->dev.of_node = dev->of_node;
+	bridge->dev.id = id;
+	dev_set_drvdata(dev, bridge);
+
+	ret = dev_set_name(&bridge->dev, "br%d", id);
+	if (ret)
+		goto error_device;
+
+	ret = device_add(&bridge->dev);
+	if (ret)
+		goto error_device;
+
+	of_platform_populate(dev->of_node, NULL, NULL, dev);
+
+	dev_info(bridge->dev.parent, "fpga bridge [%s] registered\n",
+		 bridge->name);
+
+	return 0;
+
+error_device:
+	ida_simple_remove(&fpga_bridge_ida, id);
+error_kfree:
+	kfree(bridge);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_register);
+
+/**
+ * fpga_bridge_unregister - unregister a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ */
+void fpga_bridge_unregister(struct device *dev)
+{
+	struct fpga_bridge *bridge = dev_get_drvdata(dev);
+
+	/*
+	 * If the low level driver provides a method for putting bridge into
+	 * a desired state upon unregister, do it.
+	 */
+	if (bridge->br_ops && bridge->br_ops->fpga_bridge_remove)
+		bridge->br_ops->fpga_bridge_remove(bridge);
+
+	device_unregister(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_unregister);
+
+static void fpga_bridge_dev_release(struct device *dev)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+	ida_simple_remove(&fpga_bridge_ida, bridge->dev.id);
+	kfree(bridge);
+}
+
+static int __init fpga_bridge_dev_init(void)
+{
+	spin_lock_init(&bridge_list_lock);
+
+	fpga_bridge_class = class_create(THIS_MODULE, "fpga_bridge");
+	if (IS_ERR(fpga_bridge_class))
+		return PTR_ERR(fpga_bridge_class);
+
+	fpga_bridge_class->dev_groups = fpga_bridge_groups;
+	fpga_bridge_class->dev_release = fpga_bridge_dev_release;
+
+	return 0;
+}
+
+static void __exit fpga_bridge_dev_exit(void)
+{
+	class_destroy(fpga_bridge_class);
+	ida_destroy(&fpga_bridge_ida);
+}
+
+MODULE_DESCRIPTION("FPGA Bridge Driver");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
+
+subsys_initcall(fpga_bridge_dev_init);
+module_exit(fpga_bridge_dev_exit);
diff --git a/src/kernel/linux/v4.14/drivers/fpga/fpga-mgr.c b/src/kernel/linux/v4.14/drivers/fpga/fpga-mgr.c
new file mode 100644
index 0000000..188ffef
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/fpga-mgr.c
@@ -0,0 +1,586 @@
+/*
+ * FPGA Manager Core
+ *
+ *  Copyright (C) 2013-2015 Altera Corporation
+ *
+ * With code from the mailing list:
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/firmware.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/highmem.h>
+
+static DEFINE_IDA(fpga_mgr_ida);
+static struct class *fpga_mgr_class;
+
+/*
+ * Call the low level driver's write_init function.  This will do the
+ * device-specific things to get the FPGA into the state where it is ready to
+ * receive an FPGA image. The low level driver only gets to see the first
+ * initial_header_size bytes in the buffer.
+ */
+static int fpga_mgr_write_init_buf(struct fpga_manager *mgr,
+				   struct fpga_image_info *info,
+				   const char *buf, size_t count)
+{
+	int ret;
+
+	mgr->state = FPGA_MGR_STATE_WRITE_INIT;
+	if (!mgr->mops->initial_header_size)
+		ret = mgr->mops->write_init(mgr, info, NULL, 0);
+	else
+		ret = mgr->mops->write_init(
+		    mgr, info, buf, min(mgr->mops->initial_header_size, count));
+
+	if (ret) {
+		dev_err(&mgr->dev, "Error preparing FPGA for writing\n");
+		mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
+		return ret;
+	}
+
+	return 0;
+}
+
+static int fpga_mgr_write_init_sg(struct fpga_manager *mgr,
+				  struct fpga_image_info *info,
+				  struct sg_table *sgt)
+{
+	struct sg_mapping_iter miter;
+	size_t len;
+	char *buf;
+	int ret;
+
+	if (!mgr->mops->initial_header_size)
+		return fpga_mgr_write_init_buf(mgr, info, NULL, 0);
+
+	/*
+	 * First try to use miter to map the first fragment to access the
+	 * header, this is the typical path.
+	 */
+	sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
+	if (sg_miter_next(&miter) &&
+	    miter.length >= mgr->mops->initial_header_size) {
+		ret = fpga_mgr_write_init_buf(mgr, info, miter.addr,
+					      miter.length);
+		sg_miter_stop(&miter);
+		return ret;
+	}
+	sg_miter_stop(&miter);
+
+	/* Otherwise copy the fragments into temporary memory. */
+	buf = kmalloc(mgr->mops->initial_header_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	len = sg_copy_to_buffer(sgt->sgl, sgt->nents, buf,
+				mgr->mops->initial_header_size);
+	ret = fpga_mgr_write_init_buf(mgr, info, buf, len);
+
+	kfree(buf);
+
+	return ret;
+}
+
+/*
+ * After all the FPGA image has been written, do the device specific steps to
+ * finish and set the FPGA into operating mode.
+ */
+static int fpga_mgr_write_complete(struct fpga_manager *mgr,
+				   struct fpga_image_info *info)
+{
+	int ret;
+
+	mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
+	ret = mgr->mops->write_complete(mgr, info);
+	if (ret) {
+		dev_err(&mgr->dev, "Error after writing image data to FPGA\n");
+		mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
+		return ret;
+	}
+	mgr->state = FPGA_MGR_STATE_OPERATING;
+
+	return 0;
+}
+
+/**
+ * fpga_mgr_buf_load_sg - load fpga from image in buffer from a scatter list
+ * @mgr:	fpga manager
+ * @info:	fpga image specific information
+ * @sgt:	scatterlist table
+ *
+ * Step the low level fpga manager through the device-specific steps of getting
+ * an FPGA ready to be configured, writing the image to it, then doing whatever
+ * post-configuration steps necessary.  This code assumes the caller got the
+ * mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is
+ * not an error code.
+ *
+ * This is the preferred entry point for FPGA programming, it does not require
+ * any contiguous kernel memory.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info,
+			 struct sg_table *sgt)
+{
+	int ret;
+
+	ret = fpga_mgr_write_init_sg(mgr, info, sgt);
+	if (ret)
+		return ret;
+
+	/* Write the FPGA image to the FPGA. */
+	mgr->state = FPGA_MGR_STATE_WRITE;
+	if (mgr->mops->write_sg) {
+		ret = mgr->mops->write_sg(mgr, sgt);
+	} else {
+		struct sg_mapping_iter miter;
+
+		sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
+		while (sg_miter_next(&miter)) {
+			ret = mgr->mops->write(mgr, miter.addr, miter.length);
+			if (ret)
+				break;
+		}
+		sg_miter_stop(&miter);
+	}
+
+	if (ret) {
+		dev_err(&mgr->dev, "Error while writing image data to FPGA\n");
+		mgr->state = FPGA_MGR_STATE_WRITE_ERR;
+		return ret;
+	}
+
+	return fpga_mgr_write_complete(mgr, info);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_buf_load_sg);
+
+static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr,
+				    struct fpga_image_info *info,
+				    const char *buf, size_t count)
+{
+	int ret;
+
+	ret = fpga_mgr_write_init_buf(mgr, info, buf, count);
+	if (ret)
+		return ret;
+
+	/*
+	 * Write the FPGA image to the FPGA.
+	 */
+	mgr->state = FPGA_MGR_STATE_WRITE;
+	ret = mgr->mops->write(mgr, buf, count);
+	if (ret) {
+		dev_err(&mgr->dev, "Error while writing image data to FPGA\n");
+		mgr->state = FPGA_MGR_STATE_WRITE_ERR;
+		return ret;
+	}
+
+	return fpga_mgr_write_complete(mgr, info);
+}
+
+/**
+ * fpga_mgr_buf_load - load fpga from image in buffer
+ * @mgr:	fpga manager
+ * @flags:	flags setting fpga confuration modes
+ * @buf:	buffer contain fpga image
+ * @count:	byte count of buf
+ *
+ * Step the low level fpga manager through the device-specific steps of getting
+ * an FPGA ready to be configured, writing the image to it, then doing whatever
+ * post-configuration steps necessary.  This code assumes the caller got the
+ * mgr pointer from of_fpga_mgr_get() and checked that it is not an error code.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
+		      const char *buf, size_t count)
+{
+	struct page **pages;
+	struct sg_table sgt;
+	const void *p;
+	int nr_pages;
+	int index;
+	int rc;
+
+	/*
+	 * This is just a fast path if the caller has already created a
+	 * contiguous kernel buffer and the driver doesn't require SG, non-SG
+	 * drivers will still work on the slow path.
+	 */
+	if (mgr->mops->write)
+		return fpga_mgr_buf_load_mapped(mgr, info, buf, count);
+
+	/*
+	 * Convert the linear kernel pointer into a sg_table of pages for use
+	 * by the driver.
+	 */
+	nr_pages = DIV_ROUND_UP((unsigned long)buf + count, PAGE_SIZE) -
+		   (unsigned long)buf / PAGE_SIZE;
+	pages = kmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL);
+	if (!pages)
+		return -ENOMEM;
+
+	p = buf - offset_in_page(buf);
+	for (index = 0; index < nr_pages; index++) {
+		if (is_vmalloc_addr(p))
+			pages[index] = vmalloc_to_page(p);
+		else
+			pages[index] = kmap_to_page((void *)p);
+		if (!pages[index]) {
+			kfree(pages);
+			return -EFAULT;
+		}
+		p += PAGE_SIZE;
+	}
+
+	/*
+	 * The temporary pages list is used to code share the merging algorithm
+	 * in sg_alloc_table_from_pages
+	 */
+	rc = sg_alloc_table_from_pages(&sgt, pages, index, offset_in_page(buf),
+				       count, GFP_KERNEL);
+	kfree(pages);
+	if (rc)
+		return rc;
+
+	rc = fpga_mgr_buf_load_sg(mgr, info, &sgt);
+	sg_free_table(&sgt);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
+
+/**
+ * fpga_mgr_firmware_load - request firmware and load to fpga
+ * @mgr:	fpga manager
+ * @info:	fpga image specific information
+ * @image_name:	name of image file on the firmware search path
+ *
+ * Request an FPGA image using the firmware class, then write out to the FPGA.
+ * Update the state before each step to provide info on what step failed if
+ * there is a failure.  This code assumes the caller got the mgr pointer
+ * from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is not an error
+ * code.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+			   struct fpga_image_info *info,
+			   const char *image_name)
+{
+	struct device *dev = &mgr->dev;
+	const struct firmware *fw;
+	int ret;
+
+	dev_info(dev, "writing %s to %s\n", image_name, mgr->name);
+
+	mgr->state = FPGA_MGR_STATE_FIRMWARE_REQ;
+
+	ret = request_firmware(&fw, image_name, dev);
+	if (ret) {
+		mgr->state = FPGA_MGR_STATE_FIRMWARE_REQ_ERR;
+		dev_err(dev, "Error requesting firmware %s\n", image_name);
+		return ret;
+	}
+
+	ret = fpga_mgr_buf_load(mgr, info, fw->data, fw->size);
+
+	release_firmware(fw);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_firmware_load);
+
+static const char * const state_str[] = {
+	[FPGA_MGR_STATE_UNKNOWN] =		"unknown",
+	[FPGA_MGR_STATE_POWER_OFF] =		"power off",
+	[FPGA_MGR_STATE_POWER_UP] =		"power up",
+	[FPGA_MGR_STATE_RESET] =		"reset",
+
+	/* requesting FPGA image from firmware */
+	[FPGA_MGR_STATE_FIRMWARE_REQ] =		"firmware request",
+	[FPGA_MGR_STATE_FIRMWARE_REQ_ERR] =	"firmware request error",
+
+	/* Preparing FPGA to receive image */
+	[FPGA_MGR_STATE_WRITE_INIT] =		"write init",
+	[FPGA_MGR_STATE_WRITE_INIT_ERR] =	"write init error",
+
+	/* Writing image to FPGA */
+	[FPGA_MGR_STATE_WRITE] =		"write",
+	[FPGA_MGR_STATE_WRITE_ERR] =		"write error",
+
+	/* Finishing configuration after image has been written */
+	[FPGA_MGR_STATE_WRITE_COMPLETE] =	"write complete",
+	[FPGA_MGR_STATE_WRITE_COMPLETE_ERR] =	"write complete error",
+
+	/* FPGA reports to be in normal operating mode */
+	[FPGA_MGR_STATE_OPERATING] =		"operating",
+};
+
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct fpga_manager *mgr = to_fpga_manager(dev);
+
+	return sprintf(buf, "%s\n", mgr->name);
+}
+
+static ssize_t state_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct fpga_manager *mgr = to_fpga_manager(dev);
+
+	return sprintf(buf, "%s\n", state_str[mgr->state]);
+}
+
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *fpga_mgr_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_state.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(fpga_mgr);
+
+static struct fpga_manager *__fpga_mgr_get(struct device *dev)
+{
+	struct fpga_manager *mgr;
+	int ret = -ENODEV;
+
+	mgr = to_fpga_manager(dev);
+	if (!mgr)
+		goto err_dev;
+
+	/* Get exclusive use of fpga manager */
+	if (!mutex_trylock(&mgr->ref_mutex)) {
+		ret = -EBUSY;
+		goto err_dev;
+	}
+
+	if (!try_module_get(dev->parent->driver->owner))
+		goto err_ll_mod;
+
+	return mgr;
+
+err_ll_mod:
+	mutex_unlock(&mgr->ref_mutex);
+err_dev:
+	put_device(dev);
+	return ERR_PTR(ret);
+}
+
+static int fpga_mgr_dev_match(struct device *dev, const void *data)
+{
+	return dev->parent == data;
+}
+
+/**
+ * fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @dev:	parent device that fpga mgr was registered with
+ *
+ * Given a device, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *fpga_mgr_get(struct device *dev)
+{
+	struct device *mgr_dev = class_find_device(fpga_mgr_class, NULL, dev,
+						   fpga_mgr_dev_match);
+	if (!mgr_dev)
+		return ERR_PTR(-ENODEV);
+
+	return __fpga_mgr_get(mgr_dev);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_get);
+
+static int fpga_mgr_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * of_fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @node:	device node
+ *
+ * Given a device node, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = class_find_device(fpga_mgr_class, NULL, node,
+				fpga_mgr_of_node_match);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	return __fpga_mgr_get(dev);
+}
+EXPORT_SYMBOL_GPL(of_fpga_mgr_get);
+
+/**
+ * fpga_mgr_put - release a reference to a fpga manager
+ * @mgr:	fpga manager structure
+ */
+void fpga_mgr_put(struct fpga_manager *mgr)
+{
+	module_put(mgr->dev.parent->driver->owner);
+	mutex_unlock(&mgr->ref_mutex);
+	put_device(&mgr->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_put);
+
+/**
+ * fpga_mgr_register - register a low level fpga manager driver
+ * @dev:	fpga manager device from pdev
+ * @name:	fpga manager name
+ * @mops:	pointer to structure of fpga manager ops
+ * @priv:	fpga manager private data
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int fpga_mgr_register(struct device *dev, const char *name,
+		      const struct fpga_manager_ops *mops,
+		      void *priv)
+{
+	struct fpga_manager *mgr;
+	int id, ret;
+
+	if (!mops || !mops->write_complete || !mops->state ||
+	    !mops->write_init || (!mops->write && !mops->write_sg) ||
+	    (mops->write && mops->write_sg)) {
+		dev_err(dev, "Attempt to register without fpga_manager_ops\n");
+		return -EINVAL;
+	}
+
+	if (!name || !strlen(name)) {
+		dev_err(dev, "Attempt to register with no name!\n");
+		return -EINVAL;
+	}
+
+	mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
+	if (!mgr)
+		return -ENOMEM;
+
+	id = ida_simple_get(&fpga_mgr_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto error_kfree;
+	}
+
+	mutex_init(&mgr->ref_mutex);
+
+	mgr->name = name;
+	mgr->mops = mops;
+	mgr->priv = priv;
+
+	/*
+	 * Initialize framework state by requesting low level driver read state
+	 * from device.  FPGA may be in reset mode or may have been programmed
+	 * by bootloader or EEPROM.
+	 */
+	mgr->state = mgr->mops->state(mgr);
+
+	device_initialize(&mgr->dev);
+	mgr->dev.class = fpga_mgr_class;
+	mgr->dev.parent = dev;
+	mgr->dev.of_node = dev->of_node;
+	mgr->dev.id = id;
+	dev_set_drvdata(dev, mgr);
+
+	ret = dev_set_name(&mgr->dev, "fpga%d", id);
+	if (ret)
+		goto error_device;
+
+	ret = device_add(&mgr->dev);
+	if (ret)
+		goto error_device;
+
+	dev_info(&mgr->dev, "%s registered\n", mgr->name);
+
+	return 0;
+
+error_device:
+	ida_simple_remove(&fpga_mgr_ida, id);
+error_kfree:
+	kfree(mgr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_register);
+
+/**
+ * fpga_mgr_unregister - unregister a low level fpga manager driver
+ * @dev:	fpga manager device from pdev
+ */
+void fpga_mgr_unregister(struct device *dev)
+{
+	struct fpga_manager *mgr = dev_get_drvdata(dev);
+
+	dev_info(&mgr->dev, "%s %s\n", __func__, mgr->name);
+
+	/*
+	 * If the low level driver provides a method for putting fpga into
+	 * a desired state upon unregister, do it.
+	 */
+	if (mgr->mops->fpga_remove)
+		mgr->mops->fpga_remove(mgr);
+
+	device_unregister(&mgr->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_unregister);
+
+static void fpga_mgr_dev_release(struct device *dev)
+{
+	struct fpga_manager *mgr = to_fpga_manager(dev);
+
+	ida_simple_remove(&fpga_mgr_ida, mgr->dev.id);
+	kfree(mgr);
+}
+
+static int __init fpga_mgr_class_init(void)
+{
+	pr_info("FPGA manager framework\n");
+
+	fpga_mgr_class = class_create(THIS_MODULE, "fpga_manager");
+	if (IS_ERR(fpga_mgr_class))
+		return PTR_ERR(fpga_mgr_class);
+
+	fpga_mgr_class->dev_groups = fpga_mgr_groups;
+	fpga_mgr_class->dev_release = fpga_mgr_dev_release;
+
+	return 0;
+}
+
+static void __exit fpga_mgr_class_exit(void)
+{
+	class_destroy(fpga_mgr_class);
+	ida_destroy(&fpga_mgr_ida);
+}
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("FPGA manager framework");
+MODULE_LICENSE("GPL v2");
+
+subsys_initcall(fpga_mgr_class_init);
+module_exit(fpga_mgr_class_exit);
diff --git a/src/kernel/linux/v4.14/drivers/fpga/fpga-region.c b/src/kernel/linux/v4.14/drivers/fpga/fpga-region.c
new file mode 100644
index 0000000..e0c73ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/fpga-region.c
@@ -0,0 +1,619 @@
+/*
+ * FPGA Region - Device Tree support for FPGA programming under Linux
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct fpga_region - FPGA Region structure
+ * @dev: FPGA Region device
+ * @mutex: enforces exclusive reference to region
+ * @bridge_list: list of FPGA bridges specified in region
+ * @info: fpga image specific information
+ */
+struct fpga_region {
+	struct device dev;
+	struct mutex mutex; /* for exclusive reference to region */
+	struct list_head bridge_list;
+	struct fpga_image_info *info;
+};
+
+#define to_fpga_region(d) container_of(d, struct fpga_region, dev)
+
+static DEFINE_IDA(fpga_region_ida);
+static struct class *fpga_region_class;
+
+static const struct of_device_id fpga_region_of_match[] = {
+	{ .compatible = "fpga-region", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fpga_region_of_match);
+
+static int fpga_region_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * fpga_region_find - find FPGA region
+ * @np: device node of FPGA Region
+ * Caller will need to put_device(&region->dev) when done.
+ * Returns FPGA Region struct or NULL
+ */
+static struct fpga_region *fpga_region_find(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(fpga_region_class, NULL, np,
+				fpga_region_of_node_match);
+	if (!dev)
+		return NULL;
+
+	return to_fpga_region(dev);
+}
+
+/**
+ * fpga_region_get - get an exclusive reference to a fpga region
+ * @region: FPGA Region struct
+ *
+ * Caller should call fpga_region_put() when done with region.
+ *
+ * Return fpga_region struct if successful.
+ * Return -EBUSY if someone already has a reference to the region.
+ * Return -ENODEV if @np is not a FPGA Region.
+ */
+static struct fpga_region *fpga_region_get(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+
+	if (!mutex_trylock(&region->mutex)) {
+		dev_dbg(dev, "%s: FPGA Region already in use\n", __func__);
+		return ERR_PTR(-EBUSY);
+	}
+
+	get_device(dev);
+	of_node_get(dev->of_node);
+	if (!try_module_get(dev->parent->driver->owner)) {
+		of_node_put(dev->of_node);
+		put_device(dev);
+		mutex_unlock(&region->mutex);
+		return ERR_PTR(-ENODEV);
+	}
+
+	dev_dbg(&region->dev, "get\n");
+
+	return region;
+}
+
+/**
+ * fpga_region_put - release a reference to a region
+ *
+ * @region: FPGA region
+ */
+static void fpga_region_put(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+
+	dev_dbg(&region->dev, "put\n");
+
+	module_put(dev->parent->driver->owner);
+	of_node_put(dev->of_node);
+	put_device(dev);
+	mutex_unlock(&region->mutex);
+}
+
+/**
+ * fpga_region_get_manager - get exclusive reference for FPGA manager
+ * @region: FPGA region
+ *
+ * Get FPGA Manager from "fpga-mgr" property or from ancestor region.
+ *
+ * Caller should call fpga_mgr_put() when done with manager.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node  *mgr_node;
+	struct fpga_manager *mgr;
+
+	of_node_get(np);
+	while (np) {
+		if (of_device_is_compatible(np, "fpga-region")) {
+			mgr_node = of_parse_phandle(np, "fpga-mgr", 0);
+			if (mgr_node) {
+				mgr = of_fpga_mgr_get(mgr_node);
+				of_node_put(mgr_node);
+				of_node_put(np);
+				return mgr;
+			}
+		}
+		np = of_get_next_parent(np);
+	}
+	of_node_put(np);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * fpga_region_get_bridges - create a list of bridges
+ * @region: FPGA region
+ * @overlay: device node of the overlay
+ *
+ * Create a list of bridges including the parent bridge and the bridges
+ * specified by "fpga-bridges" property.  Note that the
+ * fpga_bridges_enable/disable/put functions are all fine with an empty list
+ * if that happens.
+ *
+ * Caller should call fpga_bridges_put(&region->bridge_list) when
+ * done with the bridges.
+ *
+ * Return 0 for success (even if there are no bridges specified)
+ * or -EBUSY if any of the bridges are in use.
+ */
+static int fpga_region_get_bridges(struct fpga_region *region,
+				   struct device_node *overlay)
+{
+	struct device *dev = &region->dev;
+	struct device_node *region_np = dev->of_node;
+	struct device_node *br, *np, *parent_br = NULL;
+	int i, ret;
+
+	/* If parent is a bridge, add to list */
+	ret = fpga_bridge_get_to_list(region_np->parent, region->info,
+				      &region->bridge_list);
+	if (ret == -EBUSY)
+		return ret;
+
+	if (!ret)
+		parent_br = region_np->parent;
+
+	/* If overlay has a list of bridges, use it. */
+	br = of_parse_phandle(overlay, "fpga-bridges", 0);
+	if (br) {
+		of_node_put(br);
+		np = overlay;
+	} else {
+		np = region_np;
+	}
+
+	for (i = 0; ; i++) {
+		br = of_parse_phandle(np, "fpga-bridges", i);
+		if (!br)
+			break;
+
+		/* If parent bridge is in list, skip it. */
+		if (br == parent_br) {
+			of_node_put(br);
+			continue;
+		}
+
+		/* If node is a bridge, get it and add to list */
+		ret = fpga_bridge_get_to_list(br, region->info,
+					      &region->bridge_list);
+		of_node_put(br);
+
+		/* If any of the bridges are in use, give up */
+		if (ret == -EBUSY) {
+			fpga_bridges_put(&region->bridge_list);
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * fpga_region_program_fpga - program FPGA
+ * @region: FPGA region
+ * @firmware_name: name of FPGA image firmware file
+ * @overlay: device node of the overlay
+ * Program an FPGA using information in the device tree.
+ * Function assumes that there is a firmware-name property.
+ * Return 0 for success or negative error code.
+ */
+static int fpga_region_program_fpga(struct fpga_region *region,
+				    const char *firmware_name,
+				    struct device_node *overlay)
+{
+	struct fpga_manager *mgr;
+	int ret;
+
+	region = fpga_region_get(region);
+	if (IS_ERR(region)) {
+		pr_err("failed to get fpga region\n");
+		return PTR_ERR(region);
+	}
+
+	mgr = fpga_region_get_manager(region);
+	if (IS_ERR(mgr)) {
+		pr_err("failed to get fpga region manager\n");
+		ret = PTR_ERR(mgr);
+		goto err_put_region;
+	}
+
+	ret = fpga_region_get_bridges(region, overlay);
+	if (ret) {
+		pr_err("failed to get fpga region bridges\n");
+		goto err_put_mgr;
+	}
+
+	ret = fpga_bridges_disable(&region->bridge_list);
+	if (ret) {
+		pr_err("failed to disable region bridges\n");
+		goto err_put_br;
+	}
+
+	ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name);
+	if (ret) {
+		pr_err("failed to load fpga image\n");
+		goto err_put_br;
+	}
+
+	ret = fpga_bridges_enable(&region->bridge_list);
+	if (ret) {
+		pr_err("failed to enable region bridges\n");
+		goto err_put_br;
+	}
+
+	fpga_mgr_put(mgr);
+	fpga_region_put(region);
+
+	return 0;
+
+err_put_br:
+	fpga_bridges_put(&region->bridge_list);
+err_put_mgr:
+	fpga_mgr_put(mgr);
+err_put_region:
+	fpga_region_put(region);
+
+	return ret;
+}
+
+/**
+ * child_regions_with_firmware
+ * @overlay: device node of the overlay
+ *
+ * If the overlay adds child FPGA regions, they are not allowed to have
+ * firmware-name property.
+ *
+ * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name.
+ */
+static int child_regions_with_firmware(struct device_node *overlay)
+{
+	struct device_node *child_region;
+	const char *child_firmware_name;
+	int ret = 0;
+
+	of_node_get(overlay);
+
+	child_region = of_find_matching_node(overlay, fpga_region_of_match);
+	while (child_region) {
+		if (!of_property_read_string(child_region, "firmware-name",
+					     &child_firmware_name)) {
+			ret = -EINVAL;
+			break;
+		}
+		child_region = of_find_matching_node(child_region,
+						     fpga_region_of_match);
+	}
+
+	of_node_put(child_region);
+
+	if (ret)
+		pr_err("firmware-name not allowed in child FPGA region: %pOF",
+		       child_region);
+
+	return ret;
+}
+
+/**
+ * fpga_region_notify_pre_apply - pre-apply overlay notification
+ *
+ * @region: FPGA region that the overlay was applied to
+ * @nd: overlay notification data
+ *
+ * Called after when an overlay targeted to a FPGA Region is about to be
+ * applied.  Function will check the properties that will be added to the FPGA
+ * region.  If the checks pass, it will program the FPGA.
+ *
+ * The checks are:
+ * The overlay must add either firmware-name or external-fpga-config property
+ * to the FPGA Region.
+ *
+ *   firmware-name         : program the FPGA
+ *   external-fpga-config  : FPGA is already programmed
+ *   encrypted-fpga-config : FPGA bitstream is encrypted
+ *
+ * The overlay can add other FPGA regions, but child FPGA regions cannot have a
+ * firmware-name property since those regions don't exist yet.
+ *
+ * If the overlay that breaks the rules, notifier returns an error and the
+ * overlay is rejected before it goes into the main tree.
+ *
+ * Returns 0 for success or negative error code for failure.
+ */
+static int fpga_region_notify_pre_apply(struct fpga_region *region,
+					struct of_overlay_notify_data *nd)
+{
+	const char *firmware_name = NULL;
+	struct fpga_image_info *info;
+	int ret;
+
+	info = devm_kzalloc(&region->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	region->info = info;
+
+	/* Reject overlay if child FPGA Regions have firmware-name property */
+	ret = child_regions_with_firmware(nd->overlay);
+	if (ret)
+		return ret;
+
+	/* Read FPGA region properties from the overlay */
+	if (of_property_read_bool(nd->overlay, "partial-fpga-config"))
+		info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
+
+	if (of_property_read_bool(nd->overlay, "external-fpga-config"))
+		info->flags |= FPGA_MGR_EXTERNAL_CONFIG;
+
+	if (of_property_read_bool(nd->overlay, "encrypted-fpga-config"))
+		info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM;
+
+	of_property_read_string(nd->overlay, "firmware-name", &firmware_name);
+
+	of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us",
+			     &info->enable_timeout_us);
+
+	of_property_read_u32(nd->overlay, "region-freeze-timeout-us",
+			     &info->disable_timeout_us);
+
+	of_property_read_u32(nd->overlay, "config-complete-timeout-us",
+			     &info->config_complete_timeout_us);
+
+	/* If FPGA was externally programmed, don't specify firmware */
+	if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) {
+		pr_err("error: specified firmware and external-fpga-config");
+		return -EINVAL;
+	}
+
+	/* FPGA is already configured externally.  We're done. */
+	if (info->flags & FPGA_MGR_EXTERNAL_CONFIG)
+		return 0;
+
+	/* If we got this far, we should be programming the FPGA */
+	if (!firmware_name) {
+		pr_err("should specify firmware-name or external-fpga-config\n");
+		return -EINVAL;
+	}
+
+	return fpga_region_program_fpga(region, firmware_name, nd->overlay);
+}
+
+/**
+ * fpga_region_notify_post_remove - post-remove overlay notification
+ *
+ * @region: FPGA region that was targeted by the overlay that was removed
+ * @nd: overlay notification data
+ *
+ * Called after an overlay has been removed if the overlay's target was a
+ * FPGA region.
+ */
+static void fpga_region_notify_post_remove(struct fpga_region *region,
+					   struct of_overlay_notify_data *nd)
+{
+	fpga_bridges_disable(&region->bridge_list);
+	fpga_bridges_put(&region->bridge_list);
+	devm_kfree(&region->dev, region->info);
+	region->info = NULL;
+}
+
+/**
+ * of_fpga_region_notify - reconfig notifier for dynamic DT changes
+ * @nb:		notifier block
+ * @action:	notifier action
+ * @arg:	reconfig data
+ *
+ * This notifier handles programming a FPGA when a "firmware-name" property is
+ * added to a fpga-region.
+ *
+ * Returns NOTIFY_OK or error if FPGA programming fails.
+ */
+static int of_fpga_region_notify(struct notifier_block *nb,
+				 unsigned long action, void *arg)
+{
+	struct of_overlay_notify_data *nd = arg;
+	struct fpga_region *region;
+	int ret;
+
+	switch (action) {
+	case OF_OVERLAY_PRE_APPLY:
+		pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__);
+		break;
+	case OF_OVERLAY_POST_APPLY:
+		pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__);
+		return NOTIFY_OK;       /* not for us */
+	case OF_OVERLAY_PRE_REMOVE:
+		pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__);
+		return NOTIFY_OK;       /* not for us */
+	case OF_OVERLAY_POST_REMOVE:
+		pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__);
+		break;
+	default:			/* should not happen */
+		return NOTIFY_OK;
+	}
+
+	region = fpga_region_find(nd->target);
+	if (!region)
+		return NOTIFY_OK;
+
+	ret = 0;
+	switch (action) {
+	case OF_OVERLAY_PRE_APPLY:
+		ret = fpga_region_notify_pre_apply(region, nd);
+		break;
+
+	case OF_OVERLAY_POST_REMOVE:
+		fpga_region_notify_post_remove(region, nd);
+		break;
+	}
+
+	put_device(&region->dev);
+
+	if (ret)
+		return notifier_from_errno(ret);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block fpga_region_of_nb = {
+	.notifier_call = of_fpga_region_notify,
+};
+
+static int fpga_region_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct fpga_region *region;
+	int id, ret = 0;
+
+	region = kzalloc(sizeof(*region), GFP_KERNEL);
+	if (!region)
+		return -ENOMEM;
+
+	id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto err_kfree;
+	}
+
+	mutex_init(&region->mutex);
+	INIT_LIST_HEAD(&region->bridge_list);
+
+	device_initialize(&region->dev);
+	region->dev.class = fpga_region_class;
+	region->dev.parent = dev;
+	region->dev.of_node = np;
+	region->dev.id = id;
+	dev_set_drvdata(dev, region);
+
+	ret = dev_set_name(&region->dev, "region%d", id);
+	if (ret)
+		goto err_remove;
+
+	ret = device_add(&region->dev);
+	if (ret)
+		goto err_remove;
+
+	of_platform_populate(np, fpga_region_of_match, NULL, &region->dev);
+
+	dev_info(dev, "FPGA Region probed\n");
+
+	return 0;
+
+err_remove:
+	ida_simple_remove(&fpga_region_ida, id);
+err_kfree:
+	kfree(region);
+
+	return ret;
+}
+
+static int fpga_region_remove(struct platform_device *pdev)
+{
+	struct fpga_region *region = platform_get_drvdata(pdev);
+
+	device_unregister(&region->dev);
+
+	return 0;
+}
+
+static struct platform_driver fpga_region_driver = {
+	.probe = fpga_region_probe,
+	.remove = fpga_region_remove,
+	.driver = {
+		.name	= "fpga-region",
+		.of_match_table = of_match_ptr(fpga_region_of_match),
+	},
+};
+
+static void fpga_region_dev_release(struct device *dev)
+{
+	struct fpga_region *region = to_fpga_region(dev);
+
+	ida_simple_remove(&fpga_region_ida, region->dev.id);
+	kfree(region);
+}
+
+/**
+ * fpga_region_init - init function for fpga_region class
+ * Creates the fpga_region class and registers a reconfig notifier.
+ */
+static int __init fpga_region_init(void)
+{
+	int ret;
+
+	fpga_region_class = class_create(THIS_MODULE, "fpga_region");
+	if (IS_ERR(fpga_region_class))
+		return PTR_ERR(fpga_region_class);
+
+	fpga_region_class->dev_release = fpga_region_dev_release;
+
+	ret = of_overlay_notifier_register(&fpga_region_of_nb);
+	if (ret)
+		goto err_class;
+
+	ret = platform_driver_register(&fpga_region_driver);
+	if (ret)
+		goto err_plat;
+
+	return 0;
+
+err_plat:
+	of_overlay_notifier_unregister(&fpga_region_of_nb);
+err_class:
+	class_destroy(fpga_region_class);
+	ida_destroy(&fpga_region_ida);
+	return ret;
+}
+
+static void __exit fpga_region_exit(void)
+{
+	platform_driver_unregister(&fpga_region_driver);
+	of_overlay_notifier_unregister(&fpga_region_of_nb);
+	class_destroy(fpga_region_class);
+	ida_destroy(&fpga_region_ida);
+}
+
+subsys_initcall(fpga_region_init);
+module_exit(fpga_region_exit);
+
+MODULE_DESCRIPTION("FPGA Region");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/ice40-spi.c b/src/kernel/linux/v4.14/drivers/fpga/ice40-spi.c
new file mode 100644
index 0000000..7fca820
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/ice40-spi.c
@@ -0,0 +1,207 @@
+/*
+ * FPGA Manager Driver for Lattice iCE40.
+ *
+ *  Copyright (c) 2016 Joel Holdsworth
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This driver adds support to the FPGA manager for configuring the SRAM of
+ * Lattice iCE40 FPGAs through slave SPI.
+ */
+
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/stringify.h>
+
+#define ICE40_SPI_MAX_SPEED 25000000 /* Hz */
+#define ICE40_SPI_MIN_SPEED 1000000 /* Hz */
+
+#define ICE40_SPI_RESET_DELAY 1 /* us (>200ns) */
+#define ICE40_SPI_HOUSEKEEPING_DELAY 1200 /* us */
+
+#define ICE40_SPI_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8)
+
+struct ice40_fpga_priv {
+	struct spi_device *dev;
+	struct gpio_desc *reset;
+	struct gpio_desc *cdone;
+};
+
+static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
+{
+	struct ice40_fpga_priv *priv = mgr->priv;
+
+	return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
+		FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
+				     struct fpga_image_info *info,
+				     const char *buf, size_t count)
+{
+	struct ice40_fpga_priv *priv = mgr->priv;
+	struct spi_device *dev = priv->dev;
+	struct spi_message message;
+	struct spi_transfer assert_cs_then_reset_delay = {
+		.cs_change   = 1,
+		.delay_usecs = ICE40_SPI_RESET_DELAY
+	};
+	struct spi_transfer housekeeping_delay_then_release_cs = {
+		.delay_usecs = ICE40_SPI_HOUSEKEEPING_DELAY
+	};
+	int ret;
+
+	if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+		dev_err(&dev->dev,
+			"Partial reconfiguration is not supported\n");
+		return -ENOTSUPP;
+	}
+
+	/* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
+	spi_bus_lock(dev->master);
+
+	gpiod_set_value(priv->reset, 1);
+
+	spi_message_init(&message);
+	spi_message_add_tail(&assert_cs_then_reset_delay, &message);
+	ret = spi_sync_locked(dev, &message);
+
+	/* Come out of reset */
+	gpiod_set_value(priv->reset, 0);
+
+	/* Abort if the chip-select failed */
+	if (ret)
+		goto fail;
+
+	/* Check CDONE is de-asserted i.e. the FPGA is reset */
+	if (gpiod_get_value(priv->cdone)) {
+		dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
+		ret = -EIO;
+		goto fail;
+	}
+
+	/* Wait for the housekeeping to complete, and release SS_B */
+	spi_message_init(&message);
+	spi_message_add_tail(&housekeeping_delay_then_release_cs, &message);
+	ret = spi_sync_locked(dev, &message);
+
+fail:
+	spi_bus_unlock(dev->master);
+
+	return ret;
+}
+
+static int ice40_fpga_ops_write(struct fpga_manager *mgr,
+				const char *buf, size_t count)
+{
+	struct ice40_fpga_priv *priv = mgr->priv;
+
+	return spi_write(priv->dev, buf, count);
+}
+
+static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr,
+					 struct fpga_image_info *info)
+{
+	struct ice40_fpga_priv *priv = mgr->priv;
+	struct spi_device *dev = priv->dev;
+	const u8 padding[ICE40_SPI_NUM_ACTIVATION_BYTES] = {0};
+
+	/* Check CDONE is asserted */
+	if (!gpiod_get_value(priv->cdone)) {
+		dev_err(&dev->dev,
+			"CDONE was not asserted after firmware transfer\n");
+		return -EIO;
+	}
+
+	/* Send of zero-padding to activate the firmware */
+	return spi_write(dev, padding, sizeof(padding));
+}
+
+static const struct fpga_manager_ops ice40_fpga_ops = {
+	.state = ice40_fpga_ops_state,
+	.write_init = ice40_fpga_ops_write_init,
+	.write = ice40_fpga_ops_write,
+	.write_complete = ice40_fpga_ops_write_complete,
+};
+
+static int ice40_fpga_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct ice40_fpga_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = spi;
+
+	/* Check board setup data. */
+	if (spi->max_speed_hz > ICE40_SPI_MAX_SPEED) {
+		dev_err(dev, "SPI speed is too high, maximum speed is "
+			__stringify(ICE40_SPI_MAX_SPEED) "\n");
+		return -EINVAL;
+	}
+
+	if (spi->max_speed_hz < ICE40_SPI_MIN_SPEED) {
+		dev_err(dev, "SPI speed is too low, minimum speed is "
+			__stringify(ICE40_SPI_MIN_SPEED) "\n");
+		return -EINVAL;
+	}
+
+	if (spi->mode & SPI_CPHA) {
+		dev_err(dev, "Bad SPI mode, CPHA not supported\n");
+		return -EINVAL;
+	}
+
+	/* Set up the GPIOs */
+	priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
+	if (IS_ERR(priv->cdone)) {
+		ret = PTR_ERR(priv->cdone);
+		dev_err(dev, "Failed to get CDONE GPIO: %d\n", ret);
+		return ret;
+	}
+
+	priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset)) {
+		ret = PTR_ERR(priv->reset);
+		dev_err(dev, "Failed to get CRESET_B GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* Register with the FPGA manager */
+	return fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
+				 &ice40_fpga_ops, priv);
+}
+
+static int ice40_fpga_remove(struct spi_device *spi)
+{
+	fpga_mgr_unregister(&spi->dev);
+	return 0;
+}
+
+static const struct of_device_id ice40_fpga_of_match[] = {
+	{ .compatible = "lattice,ice40-fpga-mgr", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
+
+static struct spi_driver ice40_fpga_driver = {
+	.probe = ice40_fpga_probe,
+	.remove = ice40_fpga_remove,
+	.driver = {
+		.name = "ice40spi",
+		.of_match_table = of_match_ptr(ice40_fpga_of_match),
+	},
+};
+
+module_spi_driver(ice40_fpga_driver);
+
+MODULE_AUTHOR("Joel Holdsworth <joel@airwebreathe.org.uk>");
+MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/socfpga-a10.c b/src/kernel/linux/v4.14/drivers/fpga/socfpga-a10.c
new file mode 100644
index 0000000..f8770af
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/socfpga-a10.c
@@ -0,0 +1,557 @@
+/*
+ * FPGA Manager Driver for Altera Arria10 SoCFPGA
+ *
+ * Copyright (C) 2015-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#define A10_FPGAMGR_DCLKCNT_OFST				0x08
+#define A10_FPGAMGR_DCLKSTAT_OFST				0x0c
+#define A10_FPGAMGR_IMGCFG_CTL_00_OFST				0x70
+#define A10_FPGAMGR_IMGCFG_CTL_01_OFST				0x74
+#define A10_FPGAMGR_IMGCFG_CTL_02_OFST				0x78
+#define A10_FPGAMGR_IMGCFG_STAT_OFST				0x80
+
+#define A10_FPGAMGR_DCLKSTAT_DCLKDONE				BIT(0)
+
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG		BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS		BIT(1)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE		BIT(2)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG			BIT(8)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE		BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE		BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG		BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST		BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE			BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL			BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK		(BIT(16) | BIT(17))
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT			16
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH			BIT(24)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT		24
+
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR			BIT(0)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE		BIT(1)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE			BIT(2)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN			BIT(4)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN			BIT(6)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY			BIT(9)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE			BIT(10)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR			BIT(11)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN			BIT(12)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK	(BIT(16) | BIT(17) | BIT(18))
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT		        16
+
+/* FPGA CD Ratio Value */
+#define CDRATIO_x1						0x0
+#define CDRATIO_x2						0x1
+#define CDRATIO_x4						0x2
+#define CDRATIO_x8						0x3
+
+/* Configuration width 16/32 bit */
+#define CFGWDTH_32						1
+#define CFGWDTH_16						0
+
+/*
+ * struct a10_fpga_priv - private data for fpga manager
+ * @regmap: regmap for register access
+ * @fpga_data_addr: iomap for single address data register to FPGA
+ * @clk: clock
+ */
+struct a10_fpga_priv {
+	struct regmap *regmap;
+	void __iomem *fpga_data_addr;
+	struct clk *clk;
+};
+
+static bool socfpga_a10_fpga_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case A10_FPGAMGR_DCLKCNT_OFST:
+	case A10_FPGAMGR_DCLKSTAT_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+		return true;
+	}
+	return false;
+}
+
+static bool socfpga_a10_fpga_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case A10_FPGAMGR_DCLKCNT_OFST:
+	case A10_FPGAMGR_DCLKSTAT_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+	case A10_FPGAMGR_IMGCFG_STAT_OFST:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config socfpga_a10_fpga_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.writeable_reg = socfpga_a10_fpga_writeable_reg,
+	.readable_reg = socfpga_a10_fpga_readable_reg,
+	.max_register = A10_FPGAMGR_IMGCFG_STAT_OFST,
+	.cache_type = REGCACHE_NONE,
+};
+
+/*
+ * from the register map description of cdratio in imgcfg_ctrl_02:
+ *  Normal Configuration    : 32bit Passive Parallel
+ *  Partial Reconfiguration : 16bit Passive Parallel
+ */
+static void socfpga_a10_fpga_set_cfg_width(struct a10_fpga_priv *priv,
+					   int width)
+{
+	width <<= A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT;
+
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH, width);
+}
+
+static void socfpga_a10_fpga_generate_dclks(struct a10_fpga_priv *priv,
+					    u32 count)
+{
+	u32 val;
+
+	/* Clear any existing DONE status. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+		     A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+
+	/* Issue the DCLK regmap. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKCNT_OFST, count);
+
+	/* wait till the dclkcnt done */
+	regmap_read_poll_timeout(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST, val,
+				 val, 1, 100);
+
+	/* Clear DONE status. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+		     A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+}
+
+#define RBF_ENCRYPTION_MODE_OFFSET		69
+#define RBF_DECOMPRESS_OFFSET			229
+
+static int socfpga_a10_fpga_encrypted(u32 *buf32, size_t buf32_size)
+{
+	if (buf32_size < RBF_ENCRYPTION_MODE_OFFSET + 1)
+		return -EINVAL;
+
+	/* Is the bitstream encrypted? */
+	return ((buf32[RBF_ENCRYPTION_MODE_OFFSET] >> 2) & 3) != 0;
+}
+
+static int socfpga_a10_fpga_compressed(u32 *buf32, size_t buf32_size)
+{
+	if (buf32_size < RBF_DECOMPRESS_OFFSET + 1)
+		return -EINVAL;
+
+	/* Is the bitstream compressed? */
+	return !((buf32[RBF_DECOMPRESS_OFFSET] >> 1) & 1);
+}
+
+static unsigned int socfpga_a10_fpga_get_cd_ratio(unsigned int cfg_width,
+						  bool encrypt, bool compress)
+{
+	unsigned int cd_ratio;
+
+	/*
+	 * cd ratio is dependent on cfg width and whether the bitstream
+	 * is encrypted and/or compressed.
+	 *
+	 * | width | encr. | compr. | cd ratio |
+	 * |  16   |   0   |   0    |     1    |
+	 * |  16   |   0   |   1    |     4    |
+	 * |  16   |   1   |   0    |     2    |
+	 * |  16   |   1   |   1    |     4    |
+	 * |  32   |   0   |   0    |     1    |
+	 * |  32   |   0   |   1    |     8    |
+	 * |  32   |   1   |   0    |     4    |
+	 * |  32   |   1   |   1    |     8    |
+	 */
+	if (!compress && !encrypt)
+		return CDRATIO_x1;
+
+	if (compress)
+		cd_ratio = CDRATIO_x4;
+	else
+		cd_ratio = CDRATIO_x2;
+
+	/* If 32 bit, double the cd ratio by incrementing the field  */
+	if (cfg_width == CFGWDTH_32)
+		cd_ratio += 1;
+
+	return cd_ratio;
+}
+
+static int socfpga_a10_fpga_set_cdratio(struct fpga_manager *mgr,
+					unsigned int cfg_width,
+					const char *buf, size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	unsigned int cd_ratio;
+	int encrypt, compress;
+
+	encrypt = socfpga_a10_fpga_encrypted((u32 *)buf, count / 4);
+	if (encrypt < 0)
+		return -EINVAL;
+
+	compress = socfpga_a10_fpga_compressed((u32 *)buf, count / 4);
+	if (compress < 0)
+		return -EINVAL;
+
+	cd_ratio = socfpga_a10_fpga_get_cd_ratio(cfg_width, encrypt, compress);
+
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK,
+			   cd_ratio << A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT);
+
+	return 0;
+}
+
+static u32 socfpga_a10_fpga_read_stat(struct a10_fpga_priv *priv)
+{
+	u32 val;
+
+	regmap_read(priv->regmap, A10_FPGAMGR_IMGCFG_STAT_OFST, &val);
+
+	return val;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_ready(struct a10_fpga_priv *priv)
+{
+	u32 reg, i;
+
+	for (i = 0; i < 10 ; i++) {
+		reg = socfpga_a10_fpga_read_stat(priv);
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+			return -EINVAL;
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_done(struct a10_fpga_priv *priv)
+{
+	u32 reg, i;
+
+	for (i = 0; i < 10 ; i++) {
+		reg = socfpga_a10_fpga_read_stat(priv);
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+			return -EINVAL;
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+static int socfpga_a10_fpga_write_init(struct fpga_manager *mgr,
+				       struct fpga_image_info *info,
+				       const char *buf, size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	unsigned int cfg_width;
+	u32 msel, stat, mask;
+	int ret;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG)
+		cfg_width = CFGWDTH_16;
+	else
+		return -EINVAL;
+
+	/* Check for passive parallel (msel == 000 or 001) */
+	msel = socfpga_a10_fpga_read_stat(priv);
+	msel &= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK;
+	msel >>= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT;
+	if ((msel != 0) && (msel != 1)) {
+		dev_dbg(&mgr->dev, "Fail: invalid msel=%d\n", msel);
+		return -EINVAL;
+	}
+
+	/* Make sure no external devices are interfering */
+	stat = socfpga_a10_fpga_read_stat(priv);
+	mask = A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN |
+	       A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN;
+	if ((stat & mask) != mask)
+		return -EINVAL;
+
+	/* Set cfg width */
+	socfpga_a10_fpga_set_cfg_width(priv, cfg_width);
+
+	/* Determine cd ratio from bitstream header and set cd ratio */
+	ret = socfpga_a10_fpga_set_cdratio(mgr, cfg_width, buf, count);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear s2f_nce to enable chip select.  Leave pr_request
+	 * unasserted and override disabled.
+	 */
+	regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+		     A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+	/* Set cfg_ctrl to enable s2f dclk and data */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL);
+
+	/*
+	 * Disable overrides not needed for pr.
+	 * s2f_config==1 leaves reset deasseted.
+	 */
+	regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_00_OFST,
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG);
+
+	/* Enable override for data, dclk, nce, and pr_request to CSS */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG, 0);
+
+	/* Send some clocks to clear out any errors */
+	socfpga_a10_fpga_generate_dclks(priv, 256);
+
+	/* Assert pr_request */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST);
+
+	/* Provide 2048 DCLKs before starting the config data streaming. */
+	socfpga_a10_fpga_generate_dclks(priv, 0x7ff);
+
+	/* Wait for pr_ready */
+	return socfpga_a10_fpga_wait_for_pr_ready(priv);
+}
+
+/*
+ * write data to the FPGA data register
+ */
+static int socfpga_a10_fpga_write(struct fpga_manager *mgr, const char *buf,
+				  size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 *buffer_32 = (u32 *)buf;
+	size_t i = 0;
+
+	if (count <= 0)
+		return -EINVAL;
+
+	/* Write out the complete 32-bit chunks */
+	while (count >= sizeof(u32)) {
+		writel(buffer_32[i++], priv->fpga_data_addr);
+		count -= sizeof(u32);
+	}
+
+	/* Write out remaining non 32-bit chunks */
+	switch (count) {
+	case 3:
+		writel(buffer_32[i++] & 0x00ffffff, priv->fpga_data_addr);
+		break;
+	case 2:
+		writel(buffer_32[i++] & 0x0000ffff, priv->fpga_data_addr);
+		break;
+	case 1:
+		writel(buffer_32[i++] & 0x000000ff, priv->fpga_data_addr);
+		break;
+	case 0:
+		break;
+	default:
+		/* This will never happen */
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int socfpga_a10_fpga_write_complete(struct fpga_manager *mgr,
+					   struct fpga_image_info *info)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 reg;
+	int ret;
+
+	/* Wait for pr_done */
+	ret = socfpga_a10_fpga_wait_for_pr_done(priv);
+
+	/* Clear pr_request */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST, 0);
+
+	/* Send some clocks to clear out any errors */
+	socfpga_a10_fpga_generate_dclks(priv, 256);
+
+	/* Disable s2f dclk and data */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL, 0);
+
+	/* Deassert chip select */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE);
+
+	/* Disable data, dclk, nce, and pr_request override to CSS */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+	/* Return any errors regarding pr_done or pr_error */
+	if (ret)
+		return ret;
+
+	/* Final check */
+	reg = socfpga_a10_fpga_read_stat(priv);
+
+	if (((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE) == 0) ||
+	    ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN) == 0) ||
+	    ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)) {
+		dev_dbg(&mgr->dev,
+			"Timeout in final check. Status=%08xf\n", reg);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static enum fpga_mgr_states socfpga_a10_fpga_state(struct fpga_manager *mgr)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 reg = socfpga_a10_fpga_read_stat(priv);
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE)
+		return FPGA_MGR_STATE_OPERATING;
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+		return FPGA_MGR_STATE_WRITE;
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR)
+		return FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
+
+	if ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)
+		return FPGA_MGR_STATE_RESET;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops socfpga_a10_fpga_mgr_ops = {
+	.initial_header_size = (RBF_DECOMPRESS_OFFSET + 1) * 4,
+	.state = socfpga_a10_fpga_state,
+	.write_init = socfpga_a10_fpga_write_init,
+	.write = socfpga_a10_fpga_write,
+	.write_complete = socfpga_a10_fpga_write_complete,
+};
+
+static int socfpga_a10_fpga_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct a10_fpga_priv *priv;
+	void __iomem *reg_base;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* First mmio base is for register access */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	/* Second mmio base is for writing FPGA image data */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->fpga_data_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->fpga_data_addr))
+		return PTR_ERR(priv->fpga_data_addr);
+
+	/* regmap for register access */
+	priv->regmap = devm_regmap_init_mmio(dev, reg_base,
+					     &socfpga_a10_fpga_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return -ENODEV;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "no clock specified\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return -EBUSY;
+	}
+
+	return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager",
+				 &socfpga_a10_fpga_mgr_ops, priv);
+}
+
+static int socfpga_a10_fpga_remove(struct platform_device *pdev)
+{
+	struct fpga_manager *mgr = platform_get_drvdata(pdev);
+	struct a10_fpga_priv *priv = mgr->priv;
+
+	fpga_mgr_unregister(&pdev->dev);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id socfpga_a10_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-a10-fpga-mgr", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, socfpga_a10_fpga_of_match);
+
+static struct platform_driver socfpga_a10_fpga_driver = {
+	.probe = socfpga_a10_fpga_probe,
+	.remove = socfpga_a10_fpga_remove,
+	.driver = {
+		.name	= "socfpga_a10_fpga_manager",
+		.of_match_table = socfpga_a10_fpga_of_match,
+	},
+};
+
+module_platform_driver(socfpga_a10_fpga_driver);
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("SoCFPGA Arria10 FPGA Manager");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/socfpga.c b/src/kernel/linux/v4.14/drivers/fpga/socfpga.c
new file mode 100644
index 0000000..b6672e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/socfpga.c
@@ -0,0 +1,617 @@
+/*
+ * FPGA Manager Driver for Altera SOCFPGA
+ *
+ *  Copyright (C) 2013-2015 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm.h>
+
+/* Register offsets */
+#define SOCFPGA_FPGMGR_STAT_OFST				0x0
+#define SOCFPGA_FPGMGR_CTL_OFST					0x4
+#define SOCFPGA_FPGMGR_DCLKCNT_OFST				0x8
+#define SOCFPGA_FPGMGR_DCLKSTAT_OFST				0xc
+#define SOCFPGA_FPGMGR_GPIO_INTEN_OFST				0x830
+#define SOCFPGA_FPGMGR_GPIO_INTMSK_OFST				0x834
+#define SOCFPGA_FPGMGR_GPIO_INTTYPE_LEVEL_OFST			0x838
+#define SOCFPGA_FPGMGR_GPIO_INT_POL_OFST			0x83c
+#define SOCFPGA_FPGMGR_GPIO_INTSTAT_OFST			0x840
+#define SOCFPGA_FPGMGR_GPIO_RAW_INTSTAT_OFST			0x844
+#define SOCFPGA_FPGMGR_GPIO_PORTA_EOI_OFST			0x84c
+#define SOCFPGA_FPGMGR_GPIO_EXT_PORTA_OFST			0x850
+
+/* Register bit defines */
+/* SOCFPGA_FPGMGR_STAT register mode field values */
+#define SOCFPGA_FPGMGR_STAT_POWER_UP				0x0 /*ramping*/
+#define SOCFPGA_FPGMGR_STAT_RESET				0x1
+#define SOCFPGA_FPGMGR_STAT_CFG					0x2
+#define SOCFPGA_FPGMGR_STAT_INIT				0x3
+#define SOCFPGA_FPGMGR_STAT_USER_MODE				0x4
+#define SOCFPGA_FPGMGR_STAT_UNKNOWN				0x5
+#define SOCFPGA_FPGMGR_STAT_STATE_MASK				0x7
+/* This is a flag value that doesn't really happen in this register field */
+#define SOCFPGA_FPGMGR_STAT_POWER_OFF				0x0
+
+#define MSEL_PP16_FAST_NOAES_NODC				0x0
+#define MSEL_PP16_FAST_AES_NODC					0x1
+#define MSEL_PP16_FAST_AESOPT_DC				0x2
+#define MSEL_PP16_SLOW_NOAES_NODC				0x4
+#define MSEL_PP16_SLOW_AES_NODC					0x5
+#define MSEL_PP16_SLOW_AESOPT_DC				0x6
+#define MSEL_PP32_FAST_NOAES_NODC				0x8
+#define MSEL_PP32_FAST_AES_NODC					0x9
+#define MSEL_PP32_FAST_AESOPT_DC				0xa
+#define MSEL_PP32_SLOW_NOAES_NODC				0xc
+#define MSEL_PP32_SLOW_AES_NODC					0xd
+#define MSEL_PP32_SLOW_AESOPT_DC				0xe
+#define SOCFPGA_FPGMGR_STAT_MSEL_MASK				0x000000f8
+#define SOCFPGA_FPGMGR_STAT_MSEL_SHIFT				3
+
+/* SOCFPGA_FPGMGR_CTL register */
+#define SOCFPGA_FPGMGR_CTL_EN					0x00000001
+#define SOCFPGA_FPGMGR_CTL_NCE					0x00000002
+#define SOCFPGA_FPGMGR_CTL_NCFGPULL				0x00000004
+
+#define CDRATIO_X1						0x00000000
+#define CDRATIO_X2						0x00000040
+#define CDRATIO_X4						0x00000080
+#define CDRATIO_X8						0x000000c0
+#define SOCFPGA_FPGMGR_CTL_CDRATIO_MASK				0x000000c0
+
+#define SOCFPGA_FPGMGR_CTL_AXICFGEN				0x00000100
+
+#define CFGWDTH_16						0x00000000
+#define CFGWDTH_32						0x00000200
+#define SOCFPGA_FPGMGR_CTL_CFGWDTH_MASK				0x00000200
+
+/* SOCFPGA_FPGMGR_DCLKSTAT register */
+#define SOCFPGA_FPGMGR_DCLKSTAT_DCNTDONE_E_DONE			0x1
+
+/* SOCFPGA_FPGMGR_GPIO_* registers share the same bit positions */
+#define SOCFPGA_FPGMGR_MON_NSTATUS				0x0001
+#define SOCFPGA_FPGMGR_MON_CONF_DONE				0x0002
+#define SOCFPGA_FPGMGR_MON_INIT_DONE				0x0004
+#define SOCFPGA_FPGMGR_MON_CRC_ERROR				0x0008
+#define SOCFPGA_FPGMGR_MON_CVP_CONF_DONE			0x0010
+#define SOCFPGA_FPGMGR_MON_PR_READY				0x0020
+#define SOCFPGA_FPGMGR_MON_PR_ERROR				0x0040
+#define SOCFPGA_FPGMGR_MON_PR_DONE				0x0080
+#define SOCFPGA_FPGMGR_MON_NCONFIG_PIN				0x0100
+#define SOCFPGA_FPGMGR_MON_NSTATUS_PIN				0x0200
+#define SOCFPGA_FPGMGR_MON_CONF_DONE_PIN			0x0400
+#define SOCFPGA_FPGMGR_MON_FPGA_POWER_ON			0x0800
+#define SOCFPGA_FPGMGR_MON_STATUS_MASK				0x0fff
+
+#define SOCFPGA_FPGMGR_NUM_SUPPLIES 3
+#define SOCFPGA_RESUME_TIMEOUT 3
+
+/* In power-up order. Reverse for power-down. */
+static const char *supply_names[SOCFPGA_FPGMGR_NUM_SUPPLIES] __maybe_unused = {
+	"FPGA-1.5V",
+	"FPGA-1.1V",
+	"FPGA-2.5V",
+};
+
+struct socfpga_fpga_priv {
+	void __iomem *fpga_base_addr;
+	void __iomem *fpga_data_addr;
+	struct completion status_complete;
+	int irq;
+};
+
+struct cfgmgr_mode {
+	/* Values to set in the CTRL register */
+	u32 ctrl;
+
+	/* flag that this table entry is a valid mode */
+	bool valid;
+};
+
+/* For SOCFPGA_FPGMGR_STAT_MSEL field */
+static struct cfgmgr_mode cfgmgr_modes[] = {
+	[MSEL_PP16_FAST_NOAES_NODC] = { CFGWDTH_16 | CDRATIO_X1, 1 },
+	[MSEL_PP16_FAST_AES_NODC] =   { CFGWDTH_16 | CDRATIO_X2, 1 },
+	[MSEL_PP16_FAST_AESOPT_DC] =  { CFGWDTH_16 | CDRATIO_X4, 1 },
+	[MSEL_PP16_SLOW_NOAES_NODC] = { CFGWDTH_16 | CDRATIO_X1, 1 },
+	[MSEL_PP16_SLOW_AES_NODC] =   { CFGWDTH_16 | CDRATIO_X2, 1 },
+	[MSEL_PP16_SLOW_AESOPT_DC] =  { CFGWDTH_16 | CDRATIO_X4, 1 },
+	[MSEL_PP32_FAST_NOAES_NODC] = { CFGWDTH_32 | CDRATIO_X1, 1 },
+	[MSEL_PP32_FAST_AES_NODC] =   { CFGWDTH_32 | CDRATIO_X4, 1 },
+	[MSEL_PP32_FAST_AESOPT_DC] =  { CFGWDTH_32 | CDRATIO_X8, 1 },
+	[MSEL_PP32_SLOW_NOAES_NODC] = { CFGWDTH_32 | CDRATIO_X1, 1 },
+	[MSEL_PP32_SLOW_AES_NODC] =   { CFGWDTH_32 | CDRATIO_X4, 1 },
+	[MSEL_PP32_SLOW_AESOPT_DC] =  { CFGWDTH_32 | CDRATIO_X8, 1 },
+};
+
+static u32 socfpga_fpga_readl(struct socfpga_fpga_priv *priv, u32 reg_offset)
+{
+	return readl(priv->fpga_base_addr + reg_offset);
+}
+
+static void socfpga_fpga_writel(struct socfpga_fpga_priv *priv, u32 reg_offset,
+				u32 value)
+{
+	writel(value, priv->fpga_base_addr + reg_offset);
+}
+
+static u32 socfpga_fpga_raw_readl(struct socfpga_fpga_priv *priv,
+				  u32 reg_offset)
+{
+	return __raw_readl(priv->fpga_base_addr + reg_offset);
+}
+
+static void socfpga_fpga_raw_writel(struct socfpga_fpga_priv *priv,
+				    u32 reg_offset, u32 value)
+{
+	__raw_writel(value, priv->fpga_base_addr + reg_offset);
+}
+
+static void socfpga_fpga_data_writel(struct socfpga_fpga_priv *priv, u32 value)
+{
+	writel(value, priv->fpga_data_addr);
+}
+
+static inline void socfpga_fpga_set_bitsl(struct socfpga_fpga_priv *priv,
+					  u32 offset, u32 bits)
+{
+	u32 val;
+
+	val = socfpga_fpga_readl(priv, offset);
+	val |= bits;
+	socfpga_fpga_writel(priv, offset, val);
+}
+
+static inline void socfpga_fpga_clr_bitsl(struct socfpga_fpga_priv *priv,
+					  u32 offset, u32 bits)
+{
+	u32 val;
+
+	val = socfpga_fpga_readl(priv, offset);
+	val &= ~bits;
+	socfpga_fpga_writel(priv, offset, val);
+}
+
+static u32 socfpga_fpga_mon_status_get(struct socfpga_fpga_priv *priv)
+{
+	return socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_GPIO_EXT_PORTA_OFST) &
+		SOCFPGA_FPGMGR_MON_STATUS_MASK;
+}
+
+static u32 socfpga_fpga_state_get(struct socfpga_fpga_priv *priv)
+{
+	u32 status = socfpga_fpga_mon_status_get(priv);
+
+	if ((status & SOCFPGA_FPGMGR_MON_FPGA_POWER_ON) == 0)
+		return SOCFPGA_FPGMGR_STAT_POWER_OFF;
+
+	return socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_STAT_OFST) &
+		SOCFPGA_FPGMGR_STAT_STATE_MASK;
+}
+
+static void socfpga_fpga_clear_done_status(struct socfpga_fpga_priv *priv)
+{
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_DCLKSTAT_OFST,
+			    SOCFPGA_FPGMGR_DCLKSTAT_DCNTDONE_E_DONE);
+}
+
+/*
+ * Set the DCLKCNT, wait for DCLKSTAT to report the count completed, and clear
+ * the complete status.
+ */
+static int socfpga_fpga_dclk_set_and_wait_clear(struct socfpga_fpga_priv *priv,
+						u32 count)
+{
+	int timeout = 2;
+	u32 done;
+
+	/* Clear any existing DONE status. */
+	if (socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_DCLKSTAT_OFST))
+		socfpga_fpga_clear_done_status(priv);
+
+	/* Issue the DCLK count. */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_DCLKCNT_OFST, count);
+
+	/* Poll DCLKSTAT to see if it completed in the timeout period. */
+	do {
+		done = socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_DCLKSTAT_OFST);
+		if (done == SOCFPGA_FPGMGR_DCLKSTAT_DCNTDONE_E_DONE) {
+			socfpga_fpga_clear_done_status(priv);
+			return 0;
+		}
+		udelay(1);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static int socfpga_fpga_wait_for_state(struct socfpga_fpga_priv *priv,
+				       u32 state)
+{
+	int timeout = 2;
+
+	/*
+	 * HW doesn't support an interrupt for changes in state, so poll to see
+	 * if it matches the requested state within the timeout period.
+	 */
+	do {
+		if ((socfpga_fpga_state_get(priv) & state) != 0)
+			return 0;
+		msleep(20);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static void socfpga_fpga_enable_irqs(struct socfpga_fpga_priv *priv, u32 irqs)
+{
+	/* set irqs to level sensitive */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_INTTYPE_LEVEL_OFST, 0);
+
+	/* set interrupt polarity */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_INT_POL_OFST, irqs);
+
+	/* clear irqs */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_PORTA_EOI_OFST, irqs);
+
+	/* unmask interrupts */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_INTMSK_OFST, 0);
+
+	/* enable interrupts */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_INTEN_OFST, irqs);
+}
+
+static void socfpga_fpga_disable_irqs(struct socfpga_fpga_priv *priv)
+{
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_INTEN_OFST, 0);
+}
+
+static irqreturn_t socfpga_fpga_isr(int irq, void *dev_id)
+{
+	struct socfpga_fpga_priv *priv = dev_id;
+	u32 irqs, st;
+	bool conf_done, nstatus;
+
+	/* clear irqs */
+	irqs = socfpga_fpga_raw_readl(priv, SOCFPGA_FPGMGR_GPIO_INTSTAT_OFST);
+
+	socfpga_fpga_raw_writel(priv, SOCFPGA_FPGMGR_GPIO_PORTA_EOI_OFST, irqs);
+
+	st = socfpga_fpga_raw_readl(priv, SOCFPGA_FPGMGR_GPIO_EXT_PORTA_OFST);
+	conf_done = (st & SOCFPGA_FPGMGR_MON_CONF_DONE) != 0;
+	nstatus = (st & SOCFPGA_FPGMGR_MON_NSTATUS) != 0;
+
+	/* success */
+	if (conf_done && nstatus) {
+		/* disable irqs */
+		socfpga_fpga_raw_writel(priv,
+					SOCFPGA_FPGMGR_GPIO_INTEN_OFST, 0);
+		complete(&priv->status_complete);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int socfpga_fpga_wait_for_config_done(struct socfpga_fpga_priv *priv)
+{
+	int timeout, ret = 0;
+
+	socfpga_fpga_disable_irqs(priv);
+	init_completion(&priv->status_complete);
+	socfpga_fpga_enable_irqs(priv, SOCFPGA_FPGMGR_MON_CONF_DONE);
+
+	timeout = wait_for_completion_interruptible_timeout(
+						&priv->status_complete,
+						msecs_to_jiffies(10));
+	if (timeout == 0)
+		ret = -ETIMEDOUT;
+
+	socfpga_fpga_disable_irqs(priv);
+	return ret;
+}
+
+static int socfpga_fpga_cfg_mode_get(struct socfpga_fpga_priv *priv)
+{
+	u32 msel;
+
+	msel = socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_STAT_OFST);
+	msel &= SOCFPGA_FPGMGR_STAT_MSEL_MASK;
+	msel >>= SOCFPGA_FPGMGR_STAT_MSEL_SHIFT;
+
+	/* Check that this MSEL setting is supported */
+	if ((msel >= ARRAY_SIZE(cfgmgr_modes)) || !cfgmgr_modes[msel].valid)
+		return -EINVAL;
+
+	return msel;
+}
+
+static int socfpga_fpga_cfg_mode_set(struct socfpga_fpga_priv *priv)
+{
+	u32 ctrl_reg;
+	int mode;
+
+	/* get value from MSEL pins */
+	mode = socfpga_fpga_cfg_mode_get(priv);
+	if (mode < 0)
+		return mode;
+
+	/* Adjust CTRL for the CDRATIO */
+	ctrl_reg = socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_CTL_OFST);
+	ctrl_reg &= ~SOCFPGA_FPGMGR_CTL_CDRATIO_MASK;
+	ctrl_reg &= ~SOCFPGA_FPGMGR_CTL_CFGWDTH_MASK;
+	ctrl_reg |= cfgmgr_modes[mode].ctrl;
+
+	/* Set NCE to 0. */
+	ctrl_reg &= ~SOCFPGA_FPGMGR_CTL_NCE;
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_CTL_OFST, ctrl_reg);
+
+	return 0;
+}
+
+static int socfpga_fpga_reset(struct fpga_manager *mgr)
+{
+	struct socfpga_fpga_priv *priv = mgr->priv;
+	u32 ctrl_reg, status;
+	int ret;
+
+	/*
+	 * Step 1:
+	 *  - Set CTRL.CFGWDTH, CTRL.CDRATIO to match cfg mode
+	 *  - Set CTRL.NCE to 0
+	 */
+	ret = socfpga_fpga_cfg_mode_set(priv);
+	if (ret)
+		return ret;
+
+	/* Step 2: Set CTRL.EN to 1 */
+	socfpga_fpga_set_bitsl(priv, SOCFPGA_FPGMGR_CTL_OFST,
+			       SOCFPGA_FPGMGR_CTL_EN);
+
+	/* Step 3: Set CTRL.NCONFIGPULL to 1 to put FPGA in reset */
+	ctrl_reg = socfpga_fpga_readl(priv, SOCFPGA_FPGMGR_CTL_OFST);
+	ctrl_reg |= SOCFPGA_FPGMGR_CTL_NCFGPULL;
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_CTL_OFST, ctrl_reg);
+
+	/* Step 4: Wait for STATUS.MODE to report FPGA is in reset phase */
+	status = socfpga_fpga_wait_for_state(priv, SOCFPGA_FPGMGR_STAT_RESET);
+
+	/* Step 5: Set CONTROL.NCONFIGPULL to 0 to release FPGA from reset */
+	ctrl_reg &= ~SOCFPGA_FPGMGR_CTL_NCFGPULL;
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_CTL_OFST, ctrl_reg);
+
+	/* Timeout waiting for reset */
+	if (status)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/*
+ * Prepare the FPGA to receive the configuration data.
+ */
+static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr,
+					   struct fpga_image_info *info,
+					   const char *buf, size_t count)
+{
+	struct socfpga_fpga_priv *priv = mgr->priv;
+	int ret;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+	/* Steps 1 - 5: Reset the FPGA */
+	ret = socfpga_fpga_reset(mgr);
+	if (ret)
+		return ret;
+
+	/* Step 6: Wait for FPGA to enter configuration phase */
+	if (socfpga_fpga_wait_for_state(priv, SOCFPGA_FPGMGR_STAT_CFG))
+		return -ETIMEDOUT;
+
+	/* Step 7: Clear nSTATUS interrupt */
+	socfpga_fpga_writel(priv, SOCFPGA_FPGMGR_GPIO_PORTA_EOI_OFST,
+			    SOCFPGA_FPGMGR_MON_NSTATUS);
+
+	/* Step 8: Set CTRL.AXICFGEN to 1 to enable transfer of config data */
+	socfpga_fpga_set_bitsl(priv, SOCFPGA_FPGMGR_CTL_OFST,
+			       SOCFPGA_FPGMGR_CTL_AXICFGEN);
+
+	return 0;
+}
+
+/*
+ * Step 9: write data to the FPGA data register
+ */
+static int socfpga_fpga_ops_configure_write(struct fpga_manager *mgr,
+					    const char *buf, size_t count)
+{
+	struct socfpga_fpga_priv *priv = mgr->priv;
+	u32 *buffer_32 = (u32 *)buf;
+	size_t i = 0;
+
+	if (count <= 0)
+		return -EINVAL;
+
+	/* Write out the complete 32-bit chunks. */
+	while (count >= sizeof(u32)) {
+		socfpga_fpga_data_writel(priv, buffer_32[i++]);
+		count -= sizeof(u32);
+	}
+
+	/* Write out remaining non 32-bit chunks. */
+	switch (count) {
+	case 3:
+		socfpga_fpga_data_writel(priv, buffer_32[i++] & 0x00ffffff);
+		break;
+	case 2:
+		socfpga_fpga_data_writel(priv, buffer_32[i++] & 0x0000ffff);
+		break;
+	case 1:
+		socfpga_fpga_data_writel(priv, buffer_32[i++] & 0x000000ff);
+		break;
+	case 0:
+		break;
+	default:
+		/* This will never happen. */
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int socfpga_fpga_ops_configure_complete(struct fpga_manager *mgr,
+					       struct fpga_image_info *info)
+{
+	struct socfpga_fpga_priv *priv = mgr->priv;
+	u32 status;
+
+	/*
+	 * Step 10:
+	 *  - Observe CONF_DONE and nSTATUS (active low)
+	 *  - if CONF_DONE = 1 and nSTATUS = 1, configuration was successful
+	 *  - if CONF_DONE = 0 and nSTATUS = 0, configuration failed
+	 */
+	status = socfpga_fpga_wait_for_config_done(priv);
+	if (status)
+		return status;
+
+	/* Step 11: Clear CTRL.AXICFGEN to disable transfer of config data */
+	socfpga_fpga_clr_bitsl(priv, SOCFPGA_FPGMGR_CTL_OFST,
+			       SOCFPGA_FPGMGR_CTL_AXICFGEN);
+
+	/*
+	 * Step 12:
+	 *  - Write 4 to DCLKCNT
+	 *  - Wait for STATUS.DCNTDONE = 1
+	 *  - Clear W1C bit in STATUS.DCNTDONE
+	 */
+	if (socfpga_fpga_dclk_set_and_wait_clear(priv, 4))
+		return -ETIMEDOUT;
+
+	/* Step 13: Wait for STATUS.MODE to report USER MODE */
+	if (socfpga_fpga_wait_for_state(priv, SOCFPGA_FPGMGR_STAT_USER_MODE))
+		return -ETIMEDOUT;
+
+	/* Step 14: Set CTRL.EN to 0 */
+	socfpga_fpga_clr_bitsl(priv, SOCFPGA_FPGMGR_CTL_OFST,
+			       SOCFPGA_FPGMGR_CTL_EN);
+
+	return 0;
+}
+
+/* Translate state register values to FPGA framework state */
+static const enum fpga_mgr_states socfpga_state_to_framework_state[] = {
+	[SOCFPGA_FPGMGR_STAT_POWER_OFF] = FPGA_MGR_STATE_POWER_OFF,
+	[SOCFPGA_FPGMGR_STAT_RESET] = FPGA_MGR_STATE_RESET,
+	[SOCFPGA_FPGMGR_STAT_CFG] = FPGA_MGR_STATE_WRITE_INIT,
+	[SOCFPGA_FPGMGR_STAT_INIT] = FPGA_MGR_STATE_WRITE_INIT,
+	[SOCFPGA_FPGMGR_STAT_USER_MODE] = FPGA_MGR_STATE_OPERATING,
+	[SOCFPGA_FPGMGR_STAT_UNKNOWN] = FPGA_MGR_STATE_UNKNOWN,
+};
+
+static enum fpga_mgr_states socfpga_fpga_ops_state(struct fpga_manager *mgr)
+{
+	struct socfpga_fpga_priv *priv = mgr->priv;
+	enum fpga_mgr_states ret;
+	u32 state;
+
+	state = socfpga_fpga_state_get(priv);
+
+	if (state < ARRAY_SIZE(socfpga_state_to_framework_state))
+		ret = socfpga_state_to_framework_state[state];
+	else
+		ret = FPGA_MGR_STATE_UNKNOWN;
+
+	return ret;
+}
+
+static const struct fpga_manager_ops socfpga_fpga_ops = {
+	.state = socfpga_fpga_ops_state,
+	.write_init = socfpga_fpga_ops_configure_init,
+	.write = socfpga_fpga_ops_configure_write,
+	.write_complete = socfpga_fpga_ops_configure_complete,
+};
+
+static int socfpga_fpga_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct socfpga_fpga_priv *priv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->fpga_base_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->fpga_base_addr))
+		return PTR_ERR(priv->fpga_base_addr);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->fpga_data_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->fpga_data_addr))
+		return PTR_ERR(priv->fpga_data_addr);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	ret = devm_request_irq(dev, priv->irq, socfpga_fpga_isr, 0,
+			       dev_name(dev), priv);
+	if (ret)
+		return ret;
+
+	return fpga_mgr_register(dev, "Altera SOCFPGA FPGA Manager",
+				 &socfpga_fpga_ops, priv);
+}
+
+static int socfpga_fpga_remove(struct platform_device *pdev)
+{
+	fpga_mgr_unregister(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id socfpga_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-fpga-mgr", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, socfpga_fpga_of_match);
+#endif
+
+static struct platform_driver socfpga_fpga_driver = {
+	.probe = socfpga_fpga_probe,
+	.remove = socfpga_fpga_remove,
+	.driver = {
+		.name	= "socfpga_fpga_manager",
+		.of_match_table = of_match_ptr(socfpga_fpga_of_match),
+	},
+};
+
+module_platform_driver(socfpga_fpga_driver);
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("Altera SOCFPGA FPGA Manager");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/ts73xx-fpga.c b/src/kernel/linux/v4.14/drivers/fpga/ts73xx-fpga.c
new file mode 100644
index 0000000..f6a96b4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/ts73xx-fpga.c
@@ -0,0 +1,156 @@
+/*
+ * Technologic Systems TS-73xx SBC FPGA loader
+ *
+ * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * FPGA Manager Driver for the on-board Altera Cyclone II FPGA found on
+ * TS-7300, heavily based on load_fpga.c in their vendor tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/iopoll.h>
+#include <linux/fpga/fpga-mgr.h>
+
+#define TS73XX_FPGA_DATA_REG		0
+#define TS73XX_FPGA_CONFIG_REG		1
+
+#define TS73XX_FPGA_WRITE_DONE		0x1
+#define TS73XX_FPGA_WRITE_DONE_TIMEOUT	1000	/* us */
+#define TS73XX_FPGA_RESET		0x2
+#define TS73XX_FPGA_RESET_LOW_DELAY	30	/* us */
+#define TS73XX_FPGA_RESET_HIGH_DELAY	80	/* us */
+#define TS73XX_FPGA_LOAD_OK		0x4
+#define TS73XX_FPGA_CONFIG_LOAD		0x8
+
+struct ts73xx_fpga_priv {
+	void __iomem	*io_base;
+	struct device	*dev;
+};
+
+static enum fpga_mgr_states ts73xx_fpga_state(struct fpga_manager *mgr)
+{
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int ts73xx_fpga_write_init(struct fpga_manager *mgr,
+				  struct fpga_image_info *info,
+				  const char *buf, size_t count)
+{
+	struct ts73xx_fpga_priv *priv = mgr->priv;
+
+	/* Reset the FPGA */
+	writeb(0, priv->io_base + TS73XX_FPGA_CONFIG_REG);
+	udelay(TS73XX_FPGA_RESET_LOW_DELAY);
+	writeb(TS73XX_FPGA_RESET, priv->io_base + TS73XX_FPGA_CONFIG_REG);
+	udelay(TS73XX_FPGA_RESET_HIGH_DELAY);
+
+	return 0;
+}
+
+static int ts73xx_fpga_write(struct fpga_manager *mgr, const char *buf,
+			     size_t count)
+{
+	struct ts73xx_fpga_priv *priv = mgr->priv;
+	size_t i = 0;
+	int ret;
+	u8 reg;
+
+	while (count--) {
+		ret = readb_poll_timeout(priv->io_base + TS73XX_FPGA_CONFIG_REG,
+					 reg, !(reg & TS73XX_FPGA_WRITE_DONE),
+					 1, TS73XX_FPGA_WRITE_DONE_TIMEOUT);
+		if (ret < 0)
+			return ret;
+
+		writeb(buf[i], priv->io_base + TS73XX_FPGA_DATA_REG);
+		i++;
+	}
+
+	return 0;
+}
+
+static int ts73xx_fpga_write_complete(struct fpga_manager *mgr,
+				      struct fpga_image_info *info)
+{
+	struct ts73xx_fpga_priv *priv = mgr->priv;
+	u8 reg;
+
+	usleep_range(1000, 2000);
+	reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG);
+	reg |= TS73XX_FPGA_CONFIG_LOAD;
+	writeb(reg, priv->io_base + TS73XX_FPGA_CONFIG_REG);
+
+	usleep_range(1000, 2000);
+	reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG);
+	reg &= ~TS73XX_FPGA_CONFIG_LOAD;
+	writeb(reg, priv->io_base + TS73XX_FPGA_CONFIG_REG);
+
+	reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG);
+	if ((reg & TS73XX_FPGA_LOAD_OK) != TS73XX_FPGA_LOAD_OK)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static const struct fpga_manager_ops ts73xx_fpga_ops = {
+	.state		= ts73xx_fpga_state,
+	.write_init	= ts73xx_fpga_write_init,
+	.write		= ts73xx_fpga_write,
+	.write_complete	= ts73xx_fpga_write_complete,
+};
+
+static int ts73xx_fpga_probe(struct platform_device *pdev)
+{
+	struct device *kdev = &pdev->dev;
+	struct ts73xx_fpga_priv *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = kdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->io_base = devm_ioremap_resource(kdev, res);
+	if (IS_ERR(priv->io_base)) {
+		dev_err(kdev, "unable to remap registers\n");
+		return PTR_ERR(priv->io_base);
+	}
+
+	return fpga_mgr_register(kdev, "TS-73xx FPGA Manager",
+				 &ts73xx_fpga_ops, priv);
+}
+
+static int ts73xx_fpga_remove(struct platform_device *pdev)
+{
+	fpga_mgr_unregister(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver ts73xx_fpga_driver = {
+	.driver	= {
+		.name	= "ts73xx-fpga-mgr",
+	},
+	.probe	= ts73xx_fpga_probe,
+	.remove	= ts73xx_fpga_remove,
+};
+module_platform_driver(ts73xx_fpga_driver);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("TS-73xx FPGA Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/xilinx-pr-decoupler.c b/src/kernel/linux/v4.14/drivers/fpga/xilinx-pr-decoupler.c
new file mode 100644
index 0000000..e359930
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/xilinx-pr-decoupler.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2017, National Instruments Corp.
+ * Copyright (c) 2017, Xilix Inc
+ *
+ * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
+ * Decoupler IP Core.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define CTRL_CMD_DECOUPLE	BIT(0)
+#define CTRL_CMD_COUPLE		0
+#define CTRL_OFFSET		0
+
+struct xlnx_pr_decoupler_data {
+	void __iomem *io_base;
+	struct clk *clk;
+};
+
+static inline void xlnx_pr_decoupler_write(struct xlnx_pr_decoupler_data *d,
+					   u32 offset, u32 val)
+{
+	writel(val, d->io_base + offset);
+}
+
+static inline u32 xlnx_pr_decouple_read(const struct xlnx_pr_decoupler_data *d,
+					u32 offset)
+{
+	return readl(d->io_base + offset);
+}
+
+static int xlnx_pr_decoupler_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+	int err;
+	struct xlnx_pr_decoupler_data *priv = bridge->priv;
+
+	err = clk_enable(priv->clk);
+	if (err)
+		return err;
+
+	if (enable)
+		xlnx_pr_decoupler_write(priv, CTRL_OFFSET, CTRL_CMD_COUPLE);
+	else
+		xlnx_pr_decoupler_write(priv, CTRL_OFFSET, CTRL_CMD_DECOUPLE);
+
+	clk_disable(priv->clk);
+
+	return 0;
+}
+
+static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge)
+{
+	const struct xlnx_pr_decoupler_data *priv = bridge->priv;
+	u32 status;
+	int err;
+
+	err = clk_enable(priv->clk);
+	if (err)
+		return err;
+
+	status = readl(priv->io_base);
+
+	clk_disable(priv->clk);
+
+	return !status;
+}
+
+static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
+	.enable_set = xlnx_pr_decoupler_enable_set,
+	.enable_show = xlnx_pr_decoupler_enable_show,
+};
+
+static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
+	{ .compatible = "xlnx,pr-decoupler-1.00", },
+	{ .compatible = "xlnx,pr-decoupler", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
+
+static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
+{
+	struct xlnx_pr_decoupler_data *priv;
+	int err;
+	struct resource *res;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->io_base))
+		return PTR_ERR(priv->io_base);
+
+	priv->clk = devm_clk_get(&pdev->dev, "aclk");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "input clock not found\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		return err;
+	}
+
+	clk_disable(priv->clk);
+
+	err = fpga_bridge_register(&pdev->dev, "Xilinx PR Decoupler",
+				   &xlnx_pr_decoupler_br_ops, priv);
+
+	if (err) {
+		dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
+		clk_unprepare(priv->clk);
+		return err;
+	}
+
+	return 0;
+}
+
+static int xlnx_pr_decoupler_remove(struct platform_device *pdev)
+{
+	struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+	struct xlnx_pr_decoupler_data *p = bridge->priv;
+
+	fpga_bridge_unregister(&pdev->dev);
+
+	clk_unprepare(p->clk);
+
+	return 0;
+}
+
+static struct platform_driver xlnx_pr_decoupler_driver = {
+	.probe = xlnx_pr_decoupler_probe,
+	.remove = xlnx_pr_decoupler_remove,
+	.driver = {
+		.name = "xlnx_pr_decoupler",
+		.of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match),
+	},
+};
+
+module_platform_driver(xlnx_pr_decoupler_driver);
+
+MODULE_DESCRIPTION("Xilinx Partial Reconfiguration Decoupler");
+MODULE_AUTHOR("Moritz Fischer <mdf@kernel.org>");
+MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/xilinx-spi.c b/src/kernel/linux/v4.14/drivers/fpga/xilinx-spi.c
new file mode 100644
index 0000000..9b62a4c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/xilinx-spi.c
@@ -0,0 +1,198 @@
+/*
+ * Xilinx Spartan6 Slave Serial SPI Driver
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Manage Xilinx FPGA firmware that is loaded over SPI using
+ * the slave serial configuration interface.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/sizes.h>
+
+struct xilinx_spi_conf {
+	struct spi_device *spi;
+	struct gpio_desc *prog_b;
+	struct gpio_desc *done;
+};
+
+static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
+{
+	struct xilinx_spi_conf *conf = mgr->priv;
+
+	if (!gpiod_get_value(conf->done))
+		return FPGA_MGR_STATE_RESET;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int xilinx_spi_write_init(struct fpga_manager *mgr,
+				 struct fpga_image_info *info,
+				 const char *buf, size_t count)
+{
+	struct xilinx_spi_conf *conf = mgr->priv;
+	const size_t prog_latency_7500us = 7500;
+	const size_t prog_pulse_1us = 1;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	gpiod_set_value(conf->prog_b, 1);
+
+	udelay(prog_pulse_1us); /* min is 500 ns */
+
+	gpiod_set_value(conf->prog_b, 0);
+
+	if (gpiod_get_value(conf->done)) {
+		dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
+		return -EIO;
+	}
+
+	/* program latency */
+	usleep_range(prog_latency_7500us, prog_latency_7500us + 100);
+	return 0;
+}
+
+static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
+			    size_t count)
+{
+	struct xilinx_spi_conf *conf = mgr->priv;
+	const char *fw_data = buf;
+	const char *fw_data_end = fw_data + count;
+
+	while (fw_data < fw_data_end) {
+		size_t remaining, stride;
+		int ret;
+
+		remaining = fw_data_end - fw_data;
+		stride = min_t(size_t, remaining, SZ_4K);
+
+		ret = spi_write(conf->spi, fw_data, stride);
+		if (ret) {
+			dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
+				ret);
+			return ret;
+		}
+		fw_data += stride;
+	}
+
+	return 0;
+}
+
+static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
+{
+	struct spi_device *spi = conf->spi;
+	const u8 din_data[1] = { 0xff };
+	int ret;
+
+	ret = spi_write(conf->spi, din_data, sizeof(din_data));
+	if (ret)
+		dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
+
+	return ret;
+}
+
+static int xilinx_spi_write_complete(struct fpga_manager *mgr,
+				     struct fpga_image_info *info)
+{
+	struct xilinx_spi_conf *conf = mgr->priv;
+	unsigned long timeout;
+	int ret;
+
+	if (gpiod_get_value(conf->done))
+		return xilinx_spi_apply_cclk_cycles(conf);
+
+	timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
+
+	while (time_before(jiffies, timeout)) {
+
+		ret = xilinx_spi_apply_cclk_cycles(conf);
+		if (ret)
+			return ret;
+
+		if (gpiod_get_value(conf->done))
+			return xilinx_spi_apply_cclk_cycles(conf);
+	}
+
+	dev_err(&mgr->dev, "Timeout after config data transfer.\n");
+	return -ETIMEDOUT;
+}
+
+static const struct fpga_manager_ops xilinx_spi_ops = {
+	.state = xilinx_spi_state,
+	.write_init = xilinx_spi_write_init,
+	.write = xilinx_spi_write,
+	.write_complete = xilinx_spi_write_complete,
+};
+
+static int xilinx_spi_probe(struct spi_device *spi)
+{
+	struct xilinx_spi_conf *conf;
+
+	conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf)
+		return -ENOMEM;
+
+	conf->spi = spi;
+
+	/* PROGRAM_B is active low */
+	conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
+	if (IS_ERR(conf->prog_b)) {
+		dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
+			PTR_ERR(conf->prog_b));
+		return PTR_ERR(conf->prog_b);
+	}
+
+	conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
+	if (IS_ERR(conf->done)) {
+		dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
+			PTR_ERR(conf->done));
+		return PTR_ERR(conf->done);
+	}
+
+	return fpga_mgr_register(&spi->dev, "Xilinx Slave Serial FPGA Manager",
+				 &xilinx_spi_ops, conf);
+}
+
+static int xilinx_spi_remove(struct spi_device *spi)
+{
+	fpga_mgr_unregister(&spi->dev);
+
+	return 0;
+}
+
+static const struct of_device_id xlnx_spi_of_match[] = {
+	{ .compatible = "xlnx,fpga-slave-serial", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
+
+static struct spi_driver xilinx_slave_spi_driver = {
+	.driver = {
+		.name = "xlnx-slave-spi",
+		.of_match_table = of_match_ptr(xlnx_spi_of_match),
+	},
+	.probe = xilinx_spi_probe,
+	.remove = xilinx_spi_remove,
+};
+
+module_spi_driver(xilinx_slave_spi_driver)
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");
diff --git a/src/kernel/linux/v4.14/drivers/fpga/zynq-fpga.c b/src/kernel/linux/v4.14/drivers/fpga/zynq-fpga.c
new file mode 100644
index 0000000..70b15b3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/fpga/zynq-fpga.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (c) 2011-2015 Xilinx Inc.
+ * Copyright (c) 2015, National Instruments Corp.
+ *
+ * FPGA Manager Driver for Xilinx Zynq, heavily based on xdevcfg driver
+ * in their vendor tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+#include <linux/scatterlist.h>
+
+/* Offsets into SLCR regmap */
+
+/* FPGA Software Reset Control */
+#define SLCR_FPGA_RST_CTRL_OFFSET	0x240
+/* Level Shifters Enable */
+#define SLCR_LVL_SHFTR_EN_OFFSET	0x900
+
+/* Constant Definitions */
+
+/* Control Register */
+#define CTRL_OFFSET			0x00
+/* Lock Register */
+#define LOCK_OFFSET			0x04
+/* Interrupt Status Register */
+#define INT_STS_OFFSET			0x0c
+/* Interrupt Mask Register */
+#define INT_MASK_OFFSET			0x10
+/* Status Register */
+#define STATUS_OFFSET			0x14
+/* DMA Source Address Register */
+#define DMA_SRC_ADDR_OFFSET		0x18
+/* DMA Destination Address Reg */
+#define DMA_DST_ADDR_OFFSET		0x1c
+/* DMA Source Transfer Length */
+#define DMA_SRC_LEN_OFFSET		0x20
+/* DMA Destination Transfer */
+#define DMA_DEST_LEN_OFFSET		0x24
+/* Unlock Register */
+#define UNLOCK_OFFSET			0x34
+/* Misc. Control Register */
+#define MCTRL_OFFSET			0x80
+
+/* Control Register Bit definitions */
+
+/* Signal to reset FPGA */
+#define CTRL_PCFG_PROG_B_MASK		BIT(30)
+/* Enable PCAP for PR */
+#define CTRL_PCAP_PR_MASK		BIT(27)
+/* Enable PCAP */
+#define CTRL_PCAP_MODE_MASK		BIT(26)
+/* Lower rate to allow decrypt on the fly */
+#define CTRL_PCAP_RATE_EN_MASK		BIT(25)
+/* System booted in secure mode */
+#define CTRL_SEC_EN_MASK		BIT(7)
+
+/* Miscellaneous Control Register bit definitions */
+/* Internal PCAP loopback */
+#define MCTRL_PCAP_LPBK_MASK		BIT(4)
+
+/* Status register bit definitions */
+
+/* FPGA init status */
+#define STATUS_DMA_Q_F			BIT(31)
+#define STATUS_DMA_Q_E			BIT(30)
+#define STATUS_PCFG_INIT_MASK		BIT(4)
+
+/* Interrupt Status/Mask Register Bit definitions */
+/* DMA command done */
+#define IXR_DMA_DONE_MASK		BIT(13)
+/* DMA and PCAP cmd done */
+#define IXR_D_P_DONE_MASK		BIT(12)
+ /* FPGA programmed */
+#define IXR_PCFG_DONE_MASK		BIT(2)
+#define IXR_ERROR_FLAGS_MASK		0x00F0C860
+#define IXR_ALL_MASK			0xF8F7F87F
+
+/* Miscellaneous constant values */
+
+/* Invalid DMA addr */
+#define DMA_INVALID_ADDRESS		GENMASK(31, 0)
+/* Used to unlock the dev */
+#define UNLOCK_MASK			0x757bdf0d
+/* Timeout for polling reset bits */
+#define INIT_POLL_TIMEOUT		2500000
+/* Delay for polling reset bits */
+#define INIT_POLL_DELAY			20
+/* Signal this is the last DMA transfer, wait for the AXI and PCAP before
+ * interrupting
+ */
+#define DMA_SRC_LAST_TRANSFER		1
+/* Timeout for DMA completion */
+#define DMA_TIMEOUT_MS			5000
+
+/* Masks for controlling stuff in SLCR */
+/* Disable all Level shifters */
+#define LVL_SHFTR_DISABLE_ALL_MASK	0x0
+/* Enable Level shifters from PS to PL */
+#define LVL_SHFTR_ENABLE_PS_TO_PL	0xa
+/* Enable Level shifters from PL to PS */
+#define LVL_SHFTR_ENABLE_PL_TO_PS	0xf
+/* Enable global resets */
+#define FPGA_RST_ALL_MASK		0xf
+/* Disable global resets */
+#define FPGA_RST_NONE_MASK		0x0
+
+struct zynq_fpga_priv {
+	int irq;
+	struct clk *clk;
+
+	void __iomem *io_base;
+	struct regmap *slcr;
+
+	spinlock_t dma_lock;
+	unsigned int dma_elm;
+	unsigned int dma_nelms;
+	struct scatterlist *cur_sg;
+
+	struct completion dma_done;
+};
+
+static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
+				   u32 val)
+{
+	writel(val, priv->io_base + offset);
+}
+
+static inline u32 zynq_fpga_read(const struct zynq_fpga_priv *priv,
+				 u32 offset)
+{
+	return readl(priv->io_base + offset);
+}
+
+#define zynq_fpga_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
+	readl_poll_timeout(priv->io_base + addr, val, cond, sleep_us, \
+			   timeout_us)
+
+/* Cause the specified irq mask bits to generate IRQs */
+static inline void zynq_fpga_set_irq(struct zynq_fpga_priv *priv, u32 enable)
+{
+	zynq_fpga_write(priv, INT_MASK_OFFSET, ~enable);
+}
+
+/* Must be called with dma_lock held */
+static void zynq_step_dma(struct zynq_fpga_priv *priv)
+{
+	u32 addr;
+	u32 len;
+	bool first;
+
+	first = priv->dma_elm == 0;
+	while (priv->cur_sg) {
+		/* Feed the DMA queue until it is full. */
+		if (zynq_fpga_read(priv, STATUS_OFFSET) & STATUS_DMA_Q_F)
+			break;
+
+		addr = sg_dma_address(priv->cur_sg);
+		len = sg_dma_len(priv->cur_sg);
+		if (priv->dma_elm + 1 == priv->dma_nelms) {
+			/* The last transfer waits for the PCAP to finish too,
+			 * notice this also changes the irq_mask to ignore
+			 * IXR_DMA_DONE_MASK which ensures we do not trigger
+			 * the completion too early.
+			 */
+			addr |= DMA_SRC_LAST_TRANSFER;
+			priv->cur_sg = NULL;
+		} else {
+			priv->cur_sg = sg_next(priv->cur_sg);
+			priv->dma_elm++;
+		}
+
+		zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, addr);
+		zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, DMA_INVALID_ADDRESS);
+		zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, len / 4);
+		zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0);
+	}
+
+	/* Once the first transfer is queued we can turn on the ISR, future
+	 * calls to zynq_step_dma will happen from the ISR context. The
+	 * dma_lock spinlock guarentees this handover is done coherently, the
+	 * ISR enable is put at the end to avoid another CPU spinning in the
+	 * ISR on this lock.
+	 */
+	if (first && priv->cur_sg) {
+		zynq_fpga_set_irq(priv,
+				  IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK);
+	} else if (!priv->cur_sg) {
+		/* The last transfer changes to DMA & PCAP mode since we do
+		 * not want to continue until everything has been flushed into
+		 * the PCAP.
+		 */
+		zynq_fpga_set_irq(priv,
+				  IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK);
+	}
+}
+
+static irqreturn_t zynq_fpga_isr(int irq, void *data)
+{
+	struct zynq_fpga_priv *priv = data;
+	u32 intr_status;
+
+	/* If anything other than DMA completion is reported stop and hand
+	 * control back to zynq_fpga_ops_write, something went wrong,
+	 * otherwise progress the DMA.
+	 */
+	spin_lock(&priv->dma_lock);
+	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+	if (!(intr_status & IXR_ERROR_FLAGS_MASK) &&
+	    (intr_status & IXR_DMA_DONE_MASK) && priv->cur_sg) {
+		zynq_fpga_write(priv, INT_STS_OFFSET, IXR_DMA_DONE_MASK);
+		zynq_step_dma(priv);
+		spin_unlock(&priv->dma_lock);
+		return IRQ_HANDLED;
+	}
+	spin_unlock(&priv->dma_lock);
+
+	zynq_fpga_set_irq(priv, 0);
+	complete(&priv->dma_done);
+
+	return IRQ_HANDLED;
+}
+
+/* Sanity check the proposed bitstream. It must start with the sync word in
+ * the correct byte order, and be dword aligned. The input is a Xilinx .bin
+ * file with every 32 bit quantity swapped.
+ */
+static bool zynq_fpga_has_sync(const u8 *buf, size_t count)
+{
+	for (; count >= 4; buf += 4, count -= 4)
+		if (buf[0] == 0x66 && buf[1] == 0x55 && buf[2] == 0x99 &&
+		    buf[3] == 0xaa)
+			return true;
+	return false;
+}
+
+static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
+				    struct fpga_image_info *info,
+				    const char *buf, size_t count)
+{
+	struct zynq_fpga_priv *priv;
+	u32 ctrl, status;
+	int err;
+
+	priv = mgr->priv;
+
+	err = clk_enable(priv->clk);
+	if (err)
+		return err;
+
+	/* check if bitstream is encrypted & and system's still secure */
+	if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) {
+		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+		if (!(ctrl & CTRL_SEC_EN_MASK)) {
+			dev_err(&mgr->dev,
+				"System not secure, can't use crypted bitstreams\n");
+			err = -EINVAL;
+			goto out_err;
+		}
+	}
+
+	/* don't globally reset PL if we're doing partial reconfig */
+	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+		if (!zynq_fpga_has_sync(buf, count)) {
+			dev_err(&mgr->dev,
+				"Invalid bitstream, could not find a sync word. Bitstream must be a byte swapped .bin file\n");
+			err = -EINVAL;
+			goto out_err;
+		}
+
+		/* assert AXI interface resets */
+		regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
+			     FPGA_RST_ALL_MASK);
+
+		/* disable all level shifters */
+		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+			     LVL_SHFTR_DISABLE_ALL_MASK);
+		/* enable level shifters from PS to PL */
+		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+			     LVL_SHFTR_ENABLE_PS_TO_PL);
+
+		/* create a rising edge on PCFG_INIT. PCFG_INIT follows
+		 * PCFG_PROG_B, so we need to poll it after setting PCFG_PROG_B
+		 * to make sure the rising edge actually happens.
+		 * Note: PCFG_PROG_B is low active, sequence as described in
+		 * UG585 v1.10 page 211
+		 */
+		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+		ctrl |= CTRL_PCFG_PROG_B_MASK;
+
+		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+					     status & STATUS_PCFG_INIT_MASK,
+					     INIT_POLL_DELAY,
+					     INIT_POLL_TIMEOUT);
+		if (err) {
+			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
+			goto out_err;
+		}
+
+		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+		ctrl &= ~CTRL_PCFG_PROG_B_MASK;
+
+		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+					     !(status & STATUS_PCFG_INIT_MASK),
+					     INIT_POLL_DELAY,
+					     INIT_POLL_TIMEOUT);
+		if (err) {
+			dev_err(&mgr->dev, "Timeout waiting for !PCFG_INIT\n");
+			goto out_err;
+		}
+
+		ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+		ctrl |= CTRL_PCFG_PROG_B_MASK;
+
+		zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+		err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+					     status & STATUS_PCFG_INIT_MASK,
+					     INIT_POLL_DELAY,
+					     INIT_POLL_TIMEOUT);
+		if (err) {
+			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
+			goto out_err;
+		}
+	}
+
+	/* set configuration register with following options:
+	 * - enable PCAP interface
+	 * - set throughput for maximum speed (if bistream not crypted)
+	 * - set CPU in user mode
+	 */
+	ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+	if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM)
+		zynq_fpga_write(priv, CTRL_OFFSET,
+				(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
+				 | CTRL_PCAP_RATE_EN_MASK | ctrl));
+	else
+		zynq_fpga_write(priv, CTRL_OFFSET,
+				(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
+				 | ctrl));
+
+
+	/* We expect that the command queue is empty right now. */
+	status = zynq_fpga_read(priv, STATUS_OFFSET);
+	if ((status & STATUS_DMA_Q_F) ||
+	    (status & STATUS_DMA_Q_E) != STATUS_DMA_Q_E) {
+		dev_err(&mgr->dev, "DMA command queue not right\n");
+		err = -EBUSY;
+		goto out_err;
+	}
+
+	/* ensure internal PCAP loopback is disabled */
+	ctrl = zynq_fpga_read(priv, MCTRL_OFFSET);
+	zynq_fpga_write(priv, MCTRL_OFFSET, (~MCTRL_PCAP_LPBK_MASK & ctrl));
+
+	clk_disable(priv->clk);
+
+	return 0;
+
+out_err:
+	clk_disable(priv->clk);
+
+	return err;
+}
+
+static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
+{
+	struct zynq_fpga_priv *priv;
+	const char *why;
+	int err;
+	u32 intr_status;
+	unsigned long timeout;
+	unsigned long flags;
+	struct scatterlist *sg;
+	int i;
+
+	priv = mgr->priv;
+
+	/* The hardware can only DMA multiples of 4 bytes, and it requires the
+	 * starting addresses to be aligned to 64 bits (UG585 pg 212).
+	 */
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		if ((sg->offset % 8) || (sg->length % 4)) {
+			dev_err(&mgr->dev,
+			    "Invalid bitstream, chunks must be aligned\n");
+			return -EINVAL;
+		}
+	}
+
+	priv->dma_nelms =
+	    dma_map_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
+	if (priv->dma_nelms == 0) {
+		dev_err(&mgr->dev, "Unable to DMA map (TO_DEVICE)\n");
+		return -ENOMEM;
+	}
+
+	/* enable clock */
+	err = clk_enable(priv->clk);
+	if (err)
+		goto out_free;
+
+	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+	reinit_completion(&priv->dma_done);
+
+	/* zynq_step_dma will turn on interrupts */
+	spin_lock_irqsave(&priv->dma_lock, flags);
+	priv->dma_elm = 0;
+	priv->cur_sg = sgt->sgl;
+	zynq_step_dma(priv);
+	spin_unlock_irqrestore(&priv->dma_lock, flags);
+
+	timeout = wait_for_completion_timeout(&priv->dma_done,
+					      msecs_to_jiffies(DMA_TIMEOUT_MS));
+
+	spin_lock_irqsave(&priv->dma_lock, flags);
+	zynq_fpga_set_irq(priv, 0);
+	priv->cur_sg = NULL;
+	spin_unlock_irqrestore(&priv->dma_lock, flags);
+
+	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+
+	/* There doesn't seem to be a way to force cancel any DMA, so if
+	 * something went wrong we are relying on the hardware to have halted
+	 * the DMA before we get here, if there was we could use
+	 * wait_for_completion_interruptible too.
+	 */
+
+	if (intr_status & IXR_ERROR_FLAGS_MASK) {
+		why = "DMA reported error";
+		err = -EIO;
+		goto out_report;
+	}
+
+	if (priv->cur_sg ||
+	    !((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
+		if (timeout == 0)
+			why = "DMA timed out";
+		else
+			why = "DMA did not complete";
+		err = -EIO;
+		goto out_report;
+	}
+
+	err = 0;
+	goto out_clk;
+
+out_report:
+	dev_err(&mgr->dev,
+		"%s: INT_STS:0x%x CTRL:0x%x LOCK:0x%x INT_MASK:0x%x STATUS:0x%x MCTRL:0x%x\n",
+		why,
+		intr_status,
+		zynq_fpga_read(priv, CTRL_OFFSET),
+		zynq_fpga_read(priv, LOCK_OFFSET),
+		zynq_fpga_read(priv, INT_MASK_OFFSET),
+		zynq_fpga_read(priv, STATUS_OFFSET),
+		zynq_fpga_read(priv, MCTRL_OFFSET));
+
+out_clk:
+	clk_disable(priv->clk);
+
+out_free:
+	dma_unmap_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
+	return err;
+}
+
+static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
+					struct fpga_image_info *info)
+{
+	struct zynq_fpga_priv *priv = mgr->priv;
+	int err;
+	u32 intr_status;
+
+	err = clk_enable(priv->clk);
+	if (err)
+		return err;
+
+	err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
+				     intr_status & IXR_PCFG_DONE_MASK,
+				     INIT_POLL_DELAY,
+				     INIT_POLL_TIMEOUT);
+
+	clk_disable(priv->clk);
+
+	if (err)
+		return err;
+
+	/* for the partial reconfig case we didn't touch the level shifters */
+	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+		/* enable level shifters from PL to PS */
+		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+			     LVL_SHFTR_ENABLE_PL_TO_PS);
+
+		/* deassert AXI interface resets */
+		regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
+			     FPGA_RST_NONE_MASK);
+	}
+
+	return 0;
+}
+
+static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
+{
+	int err;
+	u32 intr_status;
+	struct zynq_fpga_priv *priv;
+
+	priv = mgr->priv;
+
+	err = clk_enable(priv->clk);
+	if (err)
+		return FPGA_MGR_STATE_UNKNOWN;
+
+	intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+	clk_disable(priv->clk);
+
+	if (intr_status & IXR_PCFG_DONE_MASK)
+		return FPGA_MGR_STATE_OPERATING;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops zynq_fpga_ops = {
+	.initial_header_size = 128,
+	.state = zynq_fpga_ops_state,
+	.write_init = zynq_fpga_ops_write_init,
+	.write_sg = zynq_fpga_ops_write,
+	.write_complete = zynq_fpga_ops_write_complete,
+};
+
+static int zynq_fpga_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct zynq_fpga_priv *priv;
+	struct resource *res;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	spin_lock_init(&priv->dma_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->io_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->io_base))
+		return PTR_ERR(priv->io_base);
+
+	priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
+		"syscon");
+	if (IS_ERR(priv->slcr)) {
+		dev_err(dev, "unable to get zynq-slcr regmap\n");
+		return PTR_ERR(priv->slcr);
+	}
+
+	init_completion(&priv->dma_done);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0) {
+		dev_err(dev, "No IRQ available\n");
+		return priv->irq;
+	}
+
+	priv->clk = devm_clk_get(dev, "ref_clk");
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "input clock not found\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		dev_err(dev, "unable to enable clock\n");
+		return err;
+	}
+
+	/* unlock the device */
+	zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
+
+	zynq_fpga_set_irq(priv, 0);
+	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+	err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0, dev_name(dev),
+			       priv);
+	if (err) {
+		dev_err(dev, "unable to request IRQ\n");
+		clk_disable_unprepare(priv->clk);
+		return err;
+	}
+
+	clk_disable(priv->clk);
+
+	err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
+				&zynq_fpga_ops, priv);
+	if (err) {
+		dev_err(dev, "unable to register FPGA manager\n");
+		clk_unprepare(priv->clk);
+		return err;
+	}
+
+	return 0;
+}
+
+static int zynq_fpga_remove(struct platform_device *pdev)
+{
+	struct zynq_fpga_priv *priv;
+	struct fpga_manager *mgr;
+
+	mgr = platform_get_drvdata(pdev);
+	priv = mgr->priv;
+
+	fpga_mgr_unregister(&pdev->dev);
+
+	clk_unprepare(priv->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id zynq_fpga_of_match[] = {
+	{ .compatible = "xlnx,zynq-devcfg-1.0", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, zynq_fpga_of_match);
+#endif
+
+static struct platform_driver zynq_fpga_driver = {
+	.probe = zynq_fpga_probe,
+	.remove = zynq_fpga_remove,
+	.driver = {
+		.name = "zynq_fpga_manager",
+		.of_match_table = of_match_ptr(zynq_fpga_of_match),
+	},
+};
+
+module_platform_driver(zynq_fpga_driver);
+
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
+MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Zynq FPGA Manager");
+MODULE_LICENSE("GPL v2");