[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c
new file mode 100644
index 0000000..26f8302
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c
@@ -0,0 +1,1263 @@
+/*
+ * Copyright (C) 2002 Motorola GSG-China
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Author:
+ * Darius Augulis, Teltonika Inc.
+ *
+ * Desc.:
+ * Implementation of I2C Adapter/Algorithm Driver
+ * for I2C Bus integrated in Freescale i.MX/MXC processors
+ *
+ * Derived from Motorola GSG China I2C example driver
+ *
+ * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de
+ * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de
+ * Copyright (C) 2007 RightHand Technologies, Inc.
+ * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/i2c-imx.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "imx-i2c"
+
+/* Default value */
+#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
+
+/*
+ * Enable DMA if transfer byte size is bigger than this threshold.
+ * As the hardware request, it must bigger than 4 bytes.\
+ * I have set '16' here, maybe it's not the best but I think it's
+ * the appropriate.
+ */
+#define DMA_THRESHOLD 16
+#define DMA_TIMEOUT 1000
+
+/* IMX I2C registers:
+ * the I2C register offset is different between SoCs,
+ * to provid support for all these chips, split the
+ * register offset into a fixed base address and a
+ * variable shift value, then the full register offset
+ * will be calculated by
+ * reg_off = ( reg_base_addr << reg_shift)
+ */
+#define IMX_I2C_IADR 0x00 /* i2c slave address */
+#define IMX_I2C_IFDR 0x01 /* i2c frequency divider */
+#define IMX_I2C_I2CR 0x02 /* i2c control */
+#define IMX_I2C_I2SR 0x03 /* i2c status */
+#define IMX_I2C_I2DR 0x04 /* i2c transfer data */
+
+#define IMX_I2C_REGSHIFT 2
+#define VF610_I2C_REGSHIFT 0
+
+/* Bits of IMX I2C registers */
+#define I2SR_RXAK 0x01
+#define I2SR_IIF 0x02
+#define I2SR_SRW 0x04
+#define I2SR_IAL 0x10
+#define I2SR_IBB 0x20
+#define I2SR_IAAS 0x40
+#define I2SR_ICF 0x80
+#define I2CR_DMAEN 0x02
+#define I2CR_RSTA 0x04
+#define I2CR_TXAK 0x08
+#define I2CR_MTX 0x10
+#define I2CR_MSTA 0x20
+#define I2CR_IIEN 0x40
+#define I2CR_IEN 0x80
+
+/* register bits different operating codes definition:
+ * 1) I2SR: Interrupt flags clear operation differ between SoCs:
+ * - write zero to clear(w0c) INT flag on i.MX,
+ * - but write one to clear(w1c) INT flag on Vybrid.
+ * 2) I2CR: I2C module enable operation also differ between SoCs:
+ * - set I2CR_IEN bit enable the module on i.MX,
+ * - but clear I2CR_IEN bit enable the module on Vybrid.
+ */
+#define I2SR_CLR_OPCODE_W0C 0x0
+#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF)
+#define I2CR_IEN_OPCODE_0 0x0
+#define I2CR_IEN_OPCODE_1 I2CR_IEN
+
+#define I2C_PM_TIMEOUT 10 /* ms */
+
+/*
+ * sorted list of clock divider, register value pairs
+ * taken from table 26-5, p.26-9, Freescale i.MX
+ * Integrated Portable System Processor Reference Manual
+ * Document Number: MC9328MXLRM, Rev. 5.1, 06/2007
+ *
+ * Duplicated divider values removed from list
+ */
+struct imx_i2c_clk_pair {
+ u16 div;
+ u16 val;
+};
+
+static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
+ { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
+ { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
+ { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
+ { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
+ { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
+ { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
+ { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
+ { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
+ { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
+ { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
+ { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
+ { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
+ { 3072, 0x1E }, { 3840, 0x1F }
+};
+
+/* Vybrid VF610 clock divider, register value pairs */
+static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
+ { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
+ { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
+ { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
+ { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
+ { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
+ { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
+ { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
+ { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
+ { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
+ { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
+ { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
+ { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+ { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+ { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+ { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
+enum imx_i2c_type {
+ IMX1_I2C,
+ IMX21_I2C,
+ VF610_I2C,
+};
+
+struct imx_i2c_hwdata {
+ enum imx_i2c_type devtype;
+ unsigned regshift;
+ struct imx_i2c_clk_pair *clk_div;
+ unsigned ndivs;
+ unsigned i2sr_clr_opcode;
+ unsigned i2cr_ien_opcode;
+};
+
+struct imx_i2c_dma {
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_using;
+ struct completion cmd_complete;
+ dma_addr_t dma_buf;
+ unsigned int dma_len;
+ enum dma_transfer_direction dma_transfer_dir;
+ enum dma_data_direction dma_data_dir;
+};
+
+struct imx_i2c_struct {
+ struct i2c_adapter adapter;
+ struct clk *clk;
+ void __iomem *base;
+ wait_queue_head_t queue;
+ unsigned long i2csr;
+ unsigned int disable_delay;
+ int stopped;
+ unsigned int ifdr; /* IMX_I2C_IFDR */
+ unsigned int cur_clk;
+ unsigned int bitrate;
+ const struct imx_i2c_hwdata *hwdata;
+ struct i2c_bus_recovery_info rinfo;
+
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pinctrl_pins_default;
+ struct pinctrl_state *pinctrl_pins_gpio;
+
+ struct imx_i2c_dma *dma;
+};
+
+static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
+ .devtype = IMX1_I2C,
+ .regshift = IMX_I2C_REGSHIFT,
+ .clk_div = imx_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+
+};
+
+static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
+ .devtype = IMX21_I2C,
+ .regshift = IMX_I2C_REGSHIFT,
+ .clk_div = imx_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+
+};
+
+static struct imx_i2c_hwdata vf610_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = vf610_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+
+};
+
+static const struct platform_device_id imx_i2c_devtype[] = {
+ {
+ .name = "imx1-i2c",
+ .driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
+ }, {
+ .name = "imx21-i2c",
+ .driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
+
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
+ { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
+ { .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
+
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+ return i2c_imx->hwdata->devtype == IMX1_I2C;
+}
+
+static inline void imx_i2c_write_reg(unsigned int val,
+ struct imx_i2c_struct *i2c_imx, unsigned int reg)
+{
+ writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
+ unsigned int reg)
+{
+ return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+/* Functions for DMA support */
+static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
+ dma_addr_t phy_addr)
+{
+ struct imx_i2c_dma *dma;
+ struct dma_slave_config dma_sconfig;
+ struct device *dev = &i2c_imx->adapter.dev;
+ int ret;
+
+ dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return;
+
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
+ if (!dma->chan_tx) {
+ dev_dbg(dev, "can't request DMA tx channel\n");
+ goto fail_al;
+ }
+
+ dma_sconfig.dst_addr = phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.dst_maxburst = 1;
+ dma_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+ if (ret < 0) {
+ dev_dbg(dev, "can't configure tx channel\n");
+ goto fail_tx;
+ }
+
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
+ if (!dma->chan_rx) {
+ dev_dbg(dev, "can't request DMA rx channel\n");
+ goto fail_tx;
+ }
+
+ dma_sconfig.src_addr = phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+ if (ret < 0) {
+ dev_dbg(dev, "can't configure rx channel\n");
+ goto fail_rx;
+ }
+
+ i2c_imx->dma = dma;
+ init_completion(&dma->cmd_complete);
+ dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+ dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+ return;
+
+fail_rx:
+ dma_release_channel(dma->chan_rx);
+fail_tx:
+ dma_release_channel(dma->chan_tx);
+fail_al:
+ devm_kfree(dev, dma);
+ dev_info(dev, "can't use DMA, using PIO instead.\n");
+}
+
+static void i2c_imx_dma_callback(void *arg)
+{
+ struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
+ dma->dma_len, dma->dma_data_dir);
+ complete(&dma->cmd_complete);
+}
+
+static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_async_tx_descriptor *txdesc;
+ struct device *dev = &i2c_imx->adapter.dev;
+ struct device *chan_dev = dma->chan_using->device->dev;
+
+ dma->dma_buf = dma_map_single(chan_dev, msgs->buf,
+ dma->dma_len, dma->dma_data_dir);
+ if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+ dev_err(dev, "DMA mapping failed\n");
+ goto err_map;
+ }
+
+ txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
+ dma->dma_len, dma->dma_transfer_dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ goto err_desc;
+ }
+
+ reinit_completion(&dma->cmd_complete);
+ txdesc->callback = i2c_imx_dma_callback;
+ txdesc->callback_param = i2c_imx;
+ if (dma_submit_error(dmaengine_submit(txdesc))) {
+ dev_err(dev, "DMA submit failed\n");
+ goto err_submit;
+ }
+
+ dma_async_issue_pending(dma->chan_using);
+ return 0;
+
+err_submit:
+ dmaengine_terminate_all(dma->chan_using);
+err_desc:
+ dma_unmap_single(chan_dev, dma->dma_buf,
+ dma->dma_len, dma->dma_data_dir);
+err_map:
+ return -EINVAL;
+}
+
+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma->dma_buf = 0;
+ dma->dma_len = 0;
+
+ dma_release_channel(dma->chan_tx);
+ dma->chan_tx = NULL;
+
+ dma_release_channel(dma->chan_rx);
+ dma->chan_rx = NULL;
+
+ dma->chan_using = NULL;
+}
+
+static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
+{
+ unsigned long orig_jiffies = jiffies;
+ unsigned int temp;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ while (1) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+
+ /* check for arbitration lost */
+ if (temp & I2SR_IAL) {
+ temp &= ~I2SR_IAL;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ return -EAGAIN;
+ }
+
+ if (for_busy && (temp & I2SR_IBB))
+ break;
+ if (!for_busy && !(temp & I2SR_IBB))
+ break;
+ if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> I2C bus is busy\n", __func__);
+ return -ETIMEDOUT;
+ }
+ schedule();
+ }
+
+ return 0;
+}
+
+static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
+{
+ wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+
+ if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
+ i2c_imx->i2csr = 0;
+ return 0;
+}
+
+static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
+{
+ if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
+ return -ENXIO; /* No ACK */
+ }
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
+ return 0;
+}
+
+static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
+{
+ struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
+ unsigned int i2c_clk_rate;
+ unsigned int div;
+ int i;
+
+ /* Divider value calculation */
+ i2c_clk_rate = clk_get_rate(i2c_imx->clk);
+ if (i2c_imx->cur_clk == i2c_clk_rate)
+ return;
+
+ i2c_imx->cur_clk = i2c_clk_rate;
+
+ div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
+ if (div < i2c_clk_div[0].div)
+ i = 0;
+ else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
+ i = i2c_imx->hwdata->ndivs - 1;
+ else
+ for (i = 0; i2c_clk_div[i].div < div; i++)
+ ;
+
+ /* Store divider value */
+ i2c_imx->ifdr = i2c_clk_div[i].val;
+
+ /*
+ * There dummy delay is calculated.
+ * It should be about one I2C clock period long.
+ * This delay is used in I2C bus disable function
+ * to fix chip hardware bug.
+ */
+ i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+ + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
+
+#ifdef CONFIG_I2C_DEBUG_BUS
+ dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n",
+ i2c_clk_rate, div);
+ dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
+ i2c_clk_div[i].val, i2c_clk_div[i].div);
+#endif
+}
+
+static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int temp = 0;
+ int result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ i2c_imx_set_clk(i2c_imx);
+
+ imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
+ /* Enable I2C controller */
+ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
+
+ /* Wait controller to be stable */
+ usleep_range(50, 150);
+
+ /* Start I2C transaction */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_MSTA;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ result = i2c_imx_bus_busy(i2c_imx, 1);
+ if (result)
+ return result;
+ i2c_imx->stopped = 0;
+
+ temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ return result;
+}
+
+static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int temp = 0;
+
+ if (!i2c_imx->stopped) {
+ /* Stop I2C transaction */
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ if (i2c_imx->dma)
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ }
+ if (is_imx1_i2c(i2c_imx)) {
+ /*
+ * This delay caused by an i.MXL hardware bug.
+ * If no (or too short) delay, no "STOP" bit will be generated.
+ */
+ udelay(i2c_imx->disable_delay);
+ }
+
+ if (!i2c_imx->stopped) {
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ }
+
+ /* Disable I2C controller */
+ temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+}
+
+static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
+{
+ struct imx_i2c_struct *i2c_imx = dev_id;
+ unsigned int temp;
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & I2SR_IIF) {
+ /* save status register */
+ i2c_imx->i2csr = temp;
+ temp &= ~I2SR_IIF;
+ temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ wake_up(&i2c_imx->queue);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
+{
+ int result;
+ unsigned long time_left;
+ unsigned int temp = 0;
+ unsigned long orig_jiffies = jiffies;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct device *dev = &i2c_imx->adapter.dev;
+
+ dma->chan_using = dma->chan_tx;
+ dma->dma_transfer_dir = DMA_MEM_TO_DEV;
+ dma->dma_data_dir = DMA_TO_DEVICE;
+ dma->dma_len = msgs->len - 1;
+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
+ if (result)
+ return result;
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /*
+ * Write slave address.
+ * The first byte must be transmitted by the CPU.
+ */
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ time_left = wait_for_completion_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(DMA_TIMEOUT));
+ if (time_left == 0) {
+ dmaengine_terminate_all(dma->chan_using);
+ return -ETIMEDOUT;
+ }
+
+ /* Waiting for transfer complete. */
+ while (1) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & I2SR_ICF)
+ break;
+ if (time_after(jiffies, orig_jiffies +
+ msecs_to_jiffies(DMA_TIMEOUT))) {
+ dev_dbg(dev, "<%s> Timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ schedule();
+ }
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* The last data byte must be transferred by the CPU. */
+ imx_i2c_write_reg(msgs->buf[msgs->len-1],
+ i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ return i2c_imx_acked(i2c_imx);
+}
+
+static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs, bool is_lastmsg)
+{
+ int result;
+ unsigned long time_left;
+ unsigned int temp;
+ unsigned long orig_jiffies = jiffies;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct device *dev = &i2c_imx->adapter.dev;
+
+
+ dma->chan_using = dma->chan_rx;
+ dma->dma_transfer_dir = DMA_DEV_TO_MEM;
+ dma->dma_data_dir = DMA_FROM_DEVICE;
+ /* The last two data bytes must be transferred by the CPU. */
+ dma->dma_len = msgs->len - 2;
+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
+ if (result)
+ return result;
+
+ time_left = wait_for_completion_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(DMA_TIMEOUT));
+ if (time_left == 0) {
+ dmaengine_terminate_all(dma->chan_using);
+ return -ETIMEDOUT;
+ }
+
+ /* waiting for transfer complete. */
+ while (1) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & I2SR_ICF)
+ break;
+ if (time_after(jiffies, orig_jiffies +
+ msecs_to_jiffies(DMA_TIMEOUT))) {
+ dev_dbg(dev, "<%s> Timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ schedule();
+ }
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* read n-1 byte data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_TXAK;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ /* read n byte data */
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ if (is_lastmsg) {
+ /*
+ * It must generate STOP before read I2DR to prevent
+ * controller from generating another clock cycle
+ */
+ dev_dbg(dev, "<%s> clear MSTA\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ } else {
+ /*
+ * For i2c master receiver repeat restart operation like:
+ * read -> repeat MSTA -> read/write
+ * The controller must set MTX before read the last byte in
+ * the first read operation, otherwise the first read cost
+ * one extra clock cycle.
+ */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_MTX;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ }
+ msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+
+ return 0;
+}
+
+static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ int i, result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
+ __func__, msgs->addr << 1);
+
+ /* write slave address */
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
+
+ /* write data */
+ for (i = 0; i < msgs->len; i++) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> write byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+ }
+ return 0;
+}
+
+static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
+{
+ int i, result;
+ unsigned int temp;
+ int block_data = msgs->flags & I2C_M_RECV_LEN;
+ int use_dma = i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data;
+
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> write slave address: addr=0x%x\n",
+ __func__, (msgs->addr << 1) | 0x01);
+
+ /* write slave address */
+ imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+
+ /* setup bus to read data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_MTX;
+
+ /*
+ * Reset the I2CR_TXAK flag initially for SMBus block read since the
+ * length is unknown
+ */
+ if ((msgs->len - 1) || block_data)
+ temp &= ~I2CR_TXAK;
+ if (use_dma)
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
+
+ if (use_dma)
+ return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
+
+ /* read data */
+ for (i = 0; i < msgs->len; i++) {
+ u8 len = 0;
+
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ /*
+ * First byte is the length of remaining packet
+ * in the SMBus block data read. Add it to
+ * msgs->len.
+ */
+ if ((!i) && block_data) {
+ len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
+ return -EPROTO;
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> read length: 0x%X\n",
+ __func__, len);
+ msgs->len += len;
+ }
+ if (i == (msgs->len - 1)) {
+ if (is_lastmsg) {
+ /*
+ * It must generate STOP before read I2DR to prevent
+ * controller from generating another clock cycle
+ */
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> clear MSTA\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ } else {
+ /*
+ * For i2c master receiver repeat restart operation like:
+ * read -> repeat MSTA -> read/write
+ * The controller must set MTX before read the last byte in
+ * the first read operation, otherwise the first read cost
+ * one extra clock cycle.
+ */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_MTX;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ }
+ } else if (i == (msgs->len - 2)) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> set TXAK\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_TXAK;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ }
+ if ((!i) && block_data)
+ msgs->buf[0] = len;
+ else
+ msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> read byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ }
+ return 0;
+}
+
+static int i2c_imx_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ unsigned int i, temp;
+ int result;
+ bool is_lastmsg = false;
+ struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+ result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+ if (result < 0)
+ goto out;
+
+ /* Start I2C transfer */
+ result = i2c_imx_start(i2c_imx);
+ if (result) {
+ if (i2c_imx->adapter.bus_recovery_info) {
+ i2c_recover_bus(&i2c_imx->adapter);
+ result = i2c_imx_start(i2c_imx);
+ }
+ }
+
+ if (result)
+ goto fail0;
+
+ /* read/write data */
+ for (i = 0; i < num; i++) {
+ if (i == num - 1)
+ is_lastmsg = true;
+
+ if (i) {
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> repeated start\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_RSTA;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ result = i2c_imx_bus_busy(i2c_imx, 1);
+ if (result)
+ goto fail0;
+ }
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> transfer message: %d\n", __func__, i);
+ /* write/read data */
+#ifdef CONFIG_I2C_DEBUG_BUS
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> CONTROL: IEN=%d, IIEN=%d, MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n",
+ __func__,
+ (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
+ (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
+ (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n",
+ __func__,
+ (temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
+ (temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
+ (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
+ (temp & I2SR_RXAK ? 1 : 0));
+#endif
+ if (msgs[i].flags & I2C_M_RD)
+ result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
+ else {
+ if (i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD)
+ result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
+ else
+ result = i2c_imx_write(i2c_imx, &msgs[i]);
+ }
+ if (result)
+ goto fail0;
+ }
+
+fail0:
+ /* Stop I2C transfer */
+ i2c_imx_stop(i2c_imx);
+
+ pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent);
+ pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
+
+out:
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
+ (result < 0) ? "error" : "success msg",
+ (result < 0) ? result : num);
+ return (result < 0) ? result : num;
+}
+
+static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct imx_i2c_struct *i2c_imx;
+
+ i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
+
+ pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
+}
+
+static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct imx_i2c_struct *i2c_imx;
+
+ i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
+
+ pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
+}
+
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+ struct platform_device *pdev)
+{
+ struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
+
+ i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+ dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+ return PTR_ERR(i2c_imx->pinctrl);
+ }
+
+ i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
+ "gpio");
+ rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
+ rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
+
+ if (rinfo->sda_gpio == -EPROBE_DEFER ||
+ rinfo->scl_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (!gpio_is_valid(rinfo->sda_gpio) ||
+ !gpio_is_valid(rinfo->scl_gpio) ||
+ IS_ERR(i2c_imx->pinctrl_pins_default) ||
+ IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
+ dev_dbg(&pdev->dev, "recovery information incomplete\n");
+ return 0;
+ }
+
+ dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
+ rinfo->scl_gpio, rinfo->sda_gpio);
+
+ rinfo->prepare_recovery = i2c_imx_prepare_recovery;
+ rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
+ rinfo->recover_bus = i2c_generic_gpio_recovery;
+ i2c_imx->adapter.bus_recovery_info = rinfo;
+
+ return 0;
+}
+
+static u32 i2c_imx_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm i2c_imx_algo = {
+ .master_xfer = i2c_imx_xfer,
+ .functionality = i2c_imx_func,
+};
+
+static int i2c_imx_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+ &pdev->dev);
+ struct imx_i2c_struct *i2c_imx;
+ struct resource *res;
+ struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ void __iomem *base;
+ int irq, ret;
+ dma_addr_t phy_addr;
+
+ dev_dbg(&pdev->dev, "<%s>\n", __func__);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "can't get irq number\n");
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ phy_addr = (dma_addr_t)res->start;
+ i2c_imx = devm_kzalloc(&pdev->dev, sizeof(*i2c_imx), GFP_KERNEL);
+ if (!i2c_imx)
+ return -ENOMEM;
+
+ if (of_id)
+ i2c_imx->hwdata = of_id->data;
+ else
+ i2c_imx->hwdata = (struct imx_i2c_hwdata *)
+ platform_get_device_id(pdev)->driver_data;
+
+ /* Setup i2c_imx driver structure */
+ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
+ i2c_imx->adapter.owner = THIS_MODULE;
+ i2c_imx->adapter.algo = &i2c_imx_algo;
+ i2c_imx->adapter.dev.parent = &pdev->dev;
+ i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
+ i2c_imx->base = base;
+
+ /* Get I2C clock */
+ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c_imx->clk)) {
+ if (PTR_ERR(i2c_imx->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "can't get I2C clock\n");
+ return PTR_ERR(i2c_imx->clk);
+ }
+
+ ret = clk_prepare_enable(i2c_imx->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable I2C clock, ret=%d\n", ret);
+ return ret;
+ }
+
+ /* Request IRQ */
+ ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
+ pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ goto clk_disable;
+ }
+
+ /* Init queue */
+ init_waitqueue_head(&i2c_imx->queue);
+
+ /* Set up adapter data */
+ i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
+
+ /* Set up platform driver data */
+ platform_set_drvdata(pdev, i2c_imx);
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ goto rpm_disable;
+
+ /* Set up clock divider */
+ i2c_imx->bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &i2c_imx->bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ i2c_imx->bitrate = pdata->bitrate;
+
+ /* Set up chip registers to defaults */
+ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+
+ /* Init optional bus recovery function */
+ ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+ /* Give it another chance if pinctrl used is not ready yet */
+ if (ret == -EPROBE_DEFER)
+ goto rpm_disable;
+
+ /* Add I2C adapter */
+ ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
+ if (ret < 0)
+ goto rpm_disable;
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
+ dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
+ dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
+ dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
+ i2c_imx->adapter.name);
+ dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
+
+ /* Init DMA config if supported */
+ i2c_imx_dma_request(i2c_imx, phy_addr);
+
+ return 0; /* Return OK */
+
+rpm_disable:
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+
+clk_disable:
+ clk_disable_unprepare(i2c_imx->clk);
+ return ret;
+}
+
+static int i2c_imx_remove(struct platform_device *pdev)
+{
+ struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ /* remove adapter */
+ dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
+ i2c_del_adapter(&i2c_imx->adapter);
+
+ if (i2c_imx->dma)
+ i2c_imx_dma_free(i2c_imx);
+
+ /* setup chip registers to defaults */
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+
+ clk_disable_unprepare(i2c_imx->clk);
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_imx_runtime_suspend(struct device *dev)
+{
+ struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(i2c_imx->clk);
+
+ return 0;
+}
+
+static int i2c_imx_runtime_resume(struct device *dev)
+{
+ struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(i2c_imx->clk);
+ if (ret)
+ dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
+
+ return ret;
+}
+
+static const struct dev_pm_ops i2c_imx_pm_ops = {
+ SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend,
+ i2c_imx_runtime_resume, NULL)
+};
+#define I2C_IMX_PM_OPS (&i2c_imx_pm_ops)
+#else
+#define I2C_IMX_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver i2c_imx_driver = {
+ .probe = i2c_imx_probe,
+ .remove = i2c_imx_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = I2C_IMX_PM_OPS,
+ .of_match_table = i2c_imx_dt_ids,
+ },
+ .id_table = imx_i2c_devtype,
+};
+
+static int __init i2c_adap_imx_init(void)
+{
+ return platform_driver_register(&i2c_imx_driver);
+}
+subsys_initcall(i2c_adap_imx_init);
+
+static void __exit i2c_adap_imx_exit(void)
+{
+ platform_driver_unregister(&i2c_imx_driver);
+}
+module_exit(i2c_adap_imx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Darius Augulis");
+MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus");
+MODULE_ALIAS("platform:" DRIVER_NAME);