[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c
new file mode 100644
index 0000000..96caf37
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c
@@ -0,0 +1,854 @@
+/*
+ * (C) Copyright 2003-2004
+ * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
+
+ * This is a combined i2c adapter and algorithm driver for the
+ * MPC107/Tsi107 PowerPC northbridge and processors that include
+ * the same I2C unit (8240, 8245, 85xx).
+ *
+ * Release 0.8
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched/signal.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc85xx.h>
+#include <sysdev/fsl_soc.h>
+
+#define DRV_NAME "mpc-i2c"
+
+#define MPC_I2C_CLOCK_LEGACY 0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
+#define MPC_I2C_FDR 0x04
+#define MPC_I2C_CR 0x08
+#define MPC_I2C_SR 0x0c
+#define MPC_I2C_DR 0x10
+#define MPC_I2C_DFSRR 0x14
+
+#define CCR_MEN 0x80
+#define CCR_MIEN 0x40
+#define CCR_MSTA 0x20
+#define CCR_MTX 0x10
+#define CCR_TXAK 0x08
+#define CCR_RSTA 0x04
+
+#define CSR_MCF 0x80
+#define CSR_MAAS 0x40
+#define CSR_MBB 0x20
+#define CSR_MAL 0x10
+#define CSR_SRW 0x04
+#define CSR_MIF 0x02
+#define CSR_RXAK 0x01
+
+struct mpc_i2c {
+ struct device *dev;
+ void __iomem *base;
+ u32 interrupt;
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ int irq;
+ u32 real_clk;
+#ifdef CONFIG_PM_SLEEP
+ u8 fdr, dfsrr;
+#endif
+ struct clk *clk_per;
+};
+
+struct mpc_i2c_divider {
+ u16 divider;
+ u16 fdr; /* including dfsrr */
+};
+
+struct mpc_i2c_data {
+ void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler);
+ u32 prescaler;
+};
+
+static inline void writeccr(struct mpc_i2c *i2c, u32 x)
+{
+ writeb(x, i2c->base + MPC_I2C_CR);
+}
+
+static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
+{
+ struct mpc_i2c *i2c = dev_id;
+ if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
+ /* Read again to allow register to stabilise */
+ i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
+ writeb(0, i2c->base + MPC_I2C_SR);
+ wake_up(&i2c->queue);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
+ * the bus, because it wants to send ACK.
+ * Following sequence of enabling/disabling and sending start/stop generates
+ * the 9 pulses, so it's all OK.
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+ int k;
+ u32 delay_val = 1000000 / i2c->real_clk + 1;
+
+ if (delay_val < 2)
+ delay_val = 2;
+
+ for (k = 9; k; k--) {
+ writeccr(i2c, 0);
+ writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ readb(i2c->base + MPC_I2C_DR);
+ writeccr(i2c, CCR_MEN);
+ udelay(delay_val << 1);
+ }
+}
+
+static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
+{
+ unsigned long orig_jiffies = jiffies;
+ u32 cmd_err;
+ int result = 0;
+
+ if (!i2c->irq) {
+ while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
+ schedule();
+ if (time_after(jiffies, orig_jiffies + timeout)) {
+ dev_dbg(i2c->dev, "timeout\n");
+ writeccr(i2c, 0);
+ result = -ETIMEDOUT;
+ break;
+ }
+ }
+ cmd_err = readb(i2c->base + MPC_I2C_SR);
+ writeb(0, i2c->base + MPC_I2C_SR);
+ } else {
+ /* Interrupt mode */
+ result = wait_event_timeout(i2c->queue,
+ (i2c->interrupt & CSR_MIF), timeout);
+
+ if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ dev_dbg(i2c->dev, "wait timeout\n");
+ writeccr(i2c, 0);
+ result = -ETIMEDOUT;
+ }
+
+ cmd_err = i2c->interrupt;
+ i2c->interrupt = 0;
+ }
+
+ if (result < 0)
+ return result;
+
+ if (!(cmd_err & CSR_MCF)) {
+ dev_dbg(i2c->dev, "unfinished\n");
+ return -EIO;
+ }
+
+ if (cmd_err & CSR_MAL) {
+ dev_dbg(i2c->dev, "MAL\n");
+ return -EAGAIN;
+ }
+
+ if (writing && (cmd_err & CSR_RXAK)) {
+ dev_dbg(i2c->dev, "No RXAK\n");
+ /* generate stop */
+ writeccr(i2c, CCR_MEN);
+ return -ENXIO;
+ }
+ return 0;
+}
+
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+ {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
+ {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
+ {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
+ {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
+ {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
+ {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
+ {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
+ {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
+ {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
+ {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
+ {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
+ {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
+ {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
+ {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
+ {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
+ {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
+ {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
+ {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
+};
+
+static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+ int prescaler, u32 *real_clk)
+{
+ const struct mpc_i2c_divider *div = NULL;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ u32 divider;
+ int i;
+
+ if (clock == MPC_I2C_CLOCK_LEGACY) {
+ /* see below - default fdr = 0x3f -> div = 2048 */
+ *real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
+ return -EINVAL;
+ }
+
+ /* Determine divider value */
+ divider = mpc5xxx_get_bus_frequency(node) / clock;
+
+ /*
+ * We want to choose an FDR/DFSR that generates an I2C bus speed that
+ * is equal to or lower than the requested speed.
+ */
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
+ div = &mpc_i2c_dividers_52xx[i];
+ /* Old MPC5200 rev A CPUs do not support the high bits */
+ if (div->fdr & 0xc0 && pvr == 0x80822011)
+ continue;
+ if (div->divider >= divider)
+ break;
+ }
+
+ *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+ return (int)div->fdr;
+}
+
+static void mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ int ret, fdr;
+
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using fdr %d\n",
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
+ ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
+ fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
+
+ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
+ fdr);
+}
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ struct device_node *node_ctrl;
+ void __iomem *ctrl;
+ const u32 *pval;
+ u32 idx;
+
+ /* Enable I2C interrupts for mpc5121 */
+ node_ctrl = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-i2c-ctrl");
+ if (node_ctrl) {
+ ctrl = of_iomap(node_ctrl, 0);
+ if (ctrl) {
+ /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+ pval = of_get_property(node, "reg", NULL);
+ idx = (*pval & 0xff) / 0x20;
+ setbits32(ctrl, 1 << (24 + idx * 2));
+ iounmap(ctrl);
+ }
+ of_node_put(node_ctrl);
+ }
+
+ /* The clock setup for the 52xx works also fine for the 512x */
+ mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_FSL_SOC
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+ {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
+ {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
+ {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
+ {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
+ {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
+ {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
+ {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
+ {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
+ {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
+ {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
+ {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
+ {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
+ {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
+ {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
+ {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
+ {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
+ {49152, 0x011e}, {61440, 0x011f}
+};
+
+static u32 mpc_i2c_get_sec_cfg_8xxx(void)
+{
+ struct device_node *node = NULL;
+ u32 __iomem *reg;
+ u32 val = 0;
+
+ node = of_find_node_by_name(NULL, "global-utilities");
+ if (node) {
+ const u32 *prop = of_get_property(node, "reg", NULL);
+ if (prop) {
+ /*
+ * Map and check POR Device Status Register 2
+ * (PORDEVSR2) at 0xE0014
+ */
+ reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
+ if (!reg)
+ printk(KERN_ERR
+ "Error: couldn't map PORDEVSR2\n");
+ else
+ val = in_be32(reg) & 0x00000080; /* sec-cfg */
+ iounmap(reg);
+ }
+ }
+ of_node_put(node);
+
+ return val;
+}
+
+static u32 mpc_i2c_get_prescaler_8xxx(void)
+{
+ /* mpc83xx and mpc82xx all have prescaler 1 */
+ u32 prescaler = 1;
+
+ /* mpc85xx */
+ if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
+ || pvr_version_is(PVR_VER_E500MC)
+ || pvr_version_is(PVR_VER_E5500)
+ || pvr_version_is(PVR_VER_E6500)) {
+ unsigned int svr = mfspr(SPRN_SVR);
+
+ if ((SVR_SOC_VER(svr) == SVR_8540)
+ || (SVR_SOC_VER(svr) == SVR_8541)
+ || (SVR_SOC_VER(svr) == SVR_8560)
+ || (SVR_SOC_VER(svr) == SVR_8555)
+ || (SVR_SOC_VER(svr) == SVR_8610))
+ /* the above 85xx SoCs have prescaler 1 */
+ prescaler = 1;
+ else
+ /* all the other 85xx have prescaler 2 */
+ prescaler = 2;
+ }
+
+ return prescaler;
+}
+
+static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+ u32 prescaler, u32 *real_clk)
+{
+ const struct mpc_i2c_divider *div = NULL;
+ u32 divider;
+ int i;
+
+ if (clock == MPC_I2C_CLOCK_LEGACY) {
+ /* see below - default fdr = 0x1031 -> div = 16 * 3072 */
+ *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
+ return -EINVAL;
+ }
+
+ /* Determine proper divider value */
+ if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
+ prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
+ if (!prescaler)
+ prescaler = mpc_i2c_get_prescaler_8xxx();
+
+ divider = fsl_get_sys_freq() / clock / prescaler;
+
+ pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
+ fsl_get_sys_freq(), clock, divider);
+
+ /*
+ * We want to choose an FDR/DFSR that generates an I2C bus speed that
+ * is equal to or lower than the requested speed.
+ */
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
+ div = &mpc_i2c_dividers_8xxx[i];
+ if (div->divider >= divider)
+ break;
+ }
+
+ *real_clk = fsl_get_sys_freq() / prescaler / div->divider;
+ return div ? (int)div->fdr : -EINVAL;
+}
+
+static void mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ int ret, fdr;
+
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+ readb(i2c->base + MPC_I2C_DFSRR),
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
+ fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
+
+ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+ writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ i2c->real_clk, fdr >> 8, fdr & 0xff);
+}
+
+#else /* !CONFIG_FSL_SOC */
+static void mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_FSL_SOC */
+
+static void mpc_i2c_start(struct mpc_i2c *i2c)
+{
+ /* Clear arbitration */
+ writeb(0, i2c->base + MPC_I2C_SR);
+ /* Start with MEN */
+ writeccr(i2c, CCR_MEN);
+}
+
+static void mpc_i2c_stop(struct mpc_i2c *i2c)
+{
+ writeccr(i2c, CCR_MEN);
+}
+
+static int mpc_write(struct mpc_i2c *i2c, int target,
+ const u8 *data, int length, int restart)
+{
+ int i, result;
+ unsigned timeout = i2c->adap.timeout;
+ u32 flags = restart ? CCR_RSTA : 0;
+
+ /* Start as master */
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+ /* Write target byte */
+ writeb((target << 1), i2c->base + MPC_I2C_DR);
+
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ /* Write data byte */
+ writeb(data[i], i2c->base + MPC_I2C_DR);
+
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
+ }
+
+ return 0;
+}
+
+static int mpc_read(struct mpc_i2c *i2c, int target,
+ u8 *data, int length, int restart, bool recv_len)
+{
+ unsigned timeout = i2c->adap.timeout;
+ int i, result;
+ u32 flags = restart ? CCR_RSTA : 0;
+
+ /* Switch to read - restart */
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+ /* Write target address byte - this time with the read flag set */
+ writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
+
+ result = i2c_wait(i2c, timeout, 1);
+ if (result < 0)
+ return result;
+
+ if (length) {
+ if (length == 1 && !recv_len)
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
+ else
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
+ /* Dummy read */
+ readb(i2c->base + MPC_I2C_DR);
+ }
+
+ for (i = 0; i < length; i++) {
+ u8 byte;
+
+ result = i2c_wait(i2c, timeout, 0);
+ if (result < 0)
+ return result;
+
+ /*
+ * For block reads, we have to know the total length (1st byte)
+ * before we can determine if we are done.
+ */
+ if (i || !recv_len) {
+ /* Generate txack on next to last byte */
+ if (i == length - 2)
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+ | CCR_TXAK);
+ /* Do not generate stop on last byte */
+ if (i == length - 1)
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+ | CCR_MTX);
+ }
+
+ byte = readb(i2c->base + MPC_I2C_DR);
+
+ /*
+ * Adjust length if first received byte is length.
+ * The length is 1 length byte plus actually data length
+ */
+ if (i == 0 && recv_len) {
+ if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+ length += byte;
+ /*
+ * For block reads, generate txack here if data length
+ * is 1 byte (total length is 2 bytes).
+ */
+ if (length == 2)
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+ | CCR_TXAK);
+ }
+ data[i] = byte;
+ }
+
+ return length;
+}
+
+static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct i2c_msg *pmsg;
+ int i;
+ int ret = 0;
+ unsigned long orig_jiffies = jiffies;
+ struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+ mpc_i2c_start(i2c);
+
+ /* Allow bus up to 1s to become not busy */
+ while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+ if (signal_pending(current)) {
+ dev_dbg(i2c->dev, "Interrupted\n");
+ writeccr(i2c, 0);
+ return -EINTR;
+ }
+ if (time_after(jiffies, orig_jiffies + HZ)) {
+ u8 status = readb(i2c->base + MPC_I2C_SR);
+
+ dev_dbg(i2c->dev, "timeout\n");
+ if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+ writeb(status & ~CSR_MAL,
+ i2c->base + MPC_I2C_SR);
+ mpc_i2c_fixup(i2c);
+ }
+ return -EIO;
+ }
+ schedule();
+ }
+
+ for (i = 0; ret >= 0 && i < num; i++) {
+ pmsg = &msgs[i];
+ dev_dbg(i2c->dev,
+ "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
+ if (pmsg->flags & I2C_M_RD) {
+ bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
+
+ ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
+ recv_len);
+ if (recv_len && ret > 0)
+ pmsg->len = ret;
+ } else {
+ ret =
+ mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
+ }
+ }
+ mpc_i2c_stop(i2c); /* Initiate STOP */
+ orig_jiffies = jiffies;
+ /* Wait until STOP is seen, allow up to 1 s */
+ while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+ if (time_after(jiffies, orig_jiffies + HZ)) {
+ u8 status = readb(i2c->base + MPC_I2C_SR);
+
+ dev_dbg(i2c->dev, "timeout\n");
+ if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+ writeb(status & ~CSR_MAL,
+ i2c->base + MPC_I2C_SR);
+ mpc_i2c_fixup(i2c);
+ }
+ return -EIO;
+ }
+ cond_resched();
+ }
+ return (ret < 0) ? ret : num;
+}
+
+static u32 mpc_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm mpc_algo = {
+ .master_xfer = mpc_xfer,
+ .functionality = mpc_functionality,
+};
+
+static struct i2c_adapter mpc_ops = {
+ .owner = THIS_MODULE,
+ .algo = &mpc_algo,
+ .timeout = HZ,
+};
+
+static const struct of_device_id mpc_i2c_of_match[];
+static int fsl_i2c_probe(struct platform_device *op)
+{
+ const struct of_device_id *match;
+ struct mpc_i2c *i2c;
+ const u32 *prop;
+ u32 clock = MPC_I2C_CLOCK_LEGACY;
+ int result = 0;
+ int plen;
+ struct resource res;
+ struct clk *clk;
+ int err;
+
+ match = of_match_device(mpc_i2c_of_match, &op->dev);
+ if (!match)
+ return -EINVAL;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ i2c->dev = &op->dev; /* for debug and error output */
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->base = of_iomap(op->dev.of_node, 0);
+ if (!i2c->base) {
+ dev_err(i2c->dev, "failed to map controller\n");
+ result = -ENOMEM;
+ goto fail_map;
+ }
+
+ i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
+ if (i2c->irq) { /* no i2c->irq implies polling */
+ result = request_irq(i2c->irq, mpc_i2c_isr,
+ IRQF_SHARED, "i2c-mpc", i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto fail_request;
+ }
+ }
+
+ /*
+ * enable clock for the I2C peripheral (non fatal),
+ * keep a reference upon successful allocation
+ */
+ clk = devm_clk_get(&op->dev, NULL);
+ if (!IS_ERR(clk)) {
+ err = clk_prepare_enable(clk);
+ if (err) {
+ dev_err(&op->dev, "failed to enable clock\n");
+ goto fail_request;
+ } else {
+ i2c->clk_per = clk;
+ }
+ }
+
+ if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) {
+ clock = MPC_I2C_CLOCK_PRESERVE;
+ } else {
+ prop = of_get_property(op->dev.of_node, "clock-frequency",
+ &plen);
+ if (prop && plen == sizeof(u32))
+ clock = *prop;
+ }
+
+ if (match->data) {
+ const struct mpc_i2c_data *data = match->data;
+ data->setup(op->dev.of_node, i2c, clock, data->prescaler);
+ } else {
+ /* Backwards compatibility */
+ if (of_get_property(op->dev.of_node, "dfsrr", NULL))
+ mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
+ }
+
+ prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
+ if (prop && plen == sizeof(u32)) {
+ mpc_ops.timeout = *prop * HZ / 1000000;
+ if (mpc_ops.timeout < 5)
+ mpc_ops.timeout = 5;
+ }
+ dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+
+ platform_set_drvdata(op, i2c);
+
+ i2c->adap = mpc_ops;
+ of_address_to_resource(op->dev.of_node, 0, &res);
+ scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "MPC adapter at 0x%llx", (unsigned long long)res.start);
+ i2c_set_adapdata(&i2c->adap, i2c);
+ i2c->adap.dev.parent = &op->dev;
+ i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+
+ result = i2c_add_adapter(&i2c->adap);
+ if (result < 0)
+ goto fail_add;
+
+ return result;
+
+ fail_add:
+ if (i2c->clk_per)
+ clk_disable_unprepare(i2c->clk_per);
+ free_irq(i2c->irq, i2c);
+ fail_request:
+ irq_dispose_mapping(i2c->irq);
+ iounmap(i2c->base);
+ fail_map:
+ kfree(i2c);
+ return result;
+};
+
+static int fsl_i2c_remove(struct platform_device *op)
+{
+ struct mpc_i2c *i2c = platform_get_drvdata(op);
+
+ i2c_del_adapter(&i2c->adap);
+
+ if (i2c->clk_per)
+ clk_disable_unprepare(i2c->clk_per);
+
+ if (i2c->irq)
+ free_irq(i2c->irq, i2c);
+
+ irq_dispose_mapping(i2c->irq);
+ iounmap(i2c->base);
+ kfree(i2c);
+ return 0;
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int mpc_i2c_suspend(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+ i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+ writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops)
+#else
+#define MPC_I2C_PM_OPS NULL
+#endif
+
+static const struct mpc_i2c_data mpc_i2c_data_512x = {
+ .setup = mpc_i2c_setup_512x,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_52xx = {
+ .setup = mpc_i2c_setup_52xx,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8313 = {
+ .setup = mpc_i2c_setup_8xxx,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8543 = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 2,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8544 = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 3,
+};
+
+static const struct of_device_id mpc_i2c_of_match[] = {
+ {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
+ {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+ {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+ {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
+ /* Backward compatibility */
+ {.compatible = "fsl-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
+
+/* Structure for a device driver */
+static struct platform_driver mpc_i2c_driver = {
+ .probe = fsl_i2c_probe,
+ .remove = fsl_i2c_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = mpc_i2c_of_match,
+ .pm = MPC_I2C_PM_OPS,
+ },
+};
+
+module_platform_driver(mpc_i2c_driver);
+
+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
+MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
+ "MPC824x/83xx/85xx/86xx/512x/52xx processors");
+MODULE_LICENSE("GPL");