diff --git a/src/kernel/linux/v4.14/drivers/i2c/Kconfig b/src/kernel/linux/v4.14/drivers/i2c/Kconfig
new file mode 100644
index 0000000..efc3354
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/Kconfig
@@ -0,0 +1,149 @@
+#
+# I2C subsystem configuration
+#
+
+menu "I2C support"
+
+config I2C
+	tristate "I2C support"
+	select RT_MUTEXES
+	select IRQ_DOMAIN
+	---help---
+	  I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
+	  many micro controller applications and developed by Philips.  SMBus,
+	  or System Management Bus is a subset of the I2C protocol.  More
+	  information is contained in the directory <file:Documentation/i2c/>,
+	  especially in the file called "summary" there.
+
+	  Both I2C and SMBus are supported here. You will need this for
+	  hardware sensors support, and also for Video For Linux support.
+
+	  If you want I2C support, you should say Y here and also to the
+	  specific driver for your bus adapter(s) below.
+
+	  This I2C support can also be built as a module.  If so, the module
+	  will be called i2c-core.
+
+config ACPI_I2C_OPREGION
+	bool "ACPI I2C Operation region support"
+	depends on I2C=y && ACPI
+	default y
+	help
+	  Say Y here if you want to enable ACPI I2C operation region support.
+	  Operation Regions allow firmware (BIOS) code to access I2C slave devices,
+	  such as smart batteries through an I2C host controller driver.
+
+if I2C
+
+config I2C_BOARDINFO
+	bool
+	default y
+
+config I2C_COMPAT
+	bool "Enable compatibility bits for old user-space"
+	default y
+	help
+	  Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
+	  other user-space package which expects i2c adapters to be class
+	  devices. If you don't know, say Y.
+
+config I2C_CHARDEV
+	tristate "I2C device interface"
+	help
+	  Say Y here to use i2c-* device files, usually found in the /dev
+	  directory on your system.  They make it possible to have user-space
+	  programs use the I2C bus.  Information on how to do this is
+	  contained in the file <file:Documentation/i2c/dev-interface>.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-dev.
+
+config I2C_MUX
+	tristate "I2C bus multiplexing support"
+	help
+	  Say Y here if you want the I2C core to support the ability to
+	  handle multiplexed I2C bus topologies, by presenting each
+	  multiplexed segment as a I2C adapter.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-mux.
+
+source drivers/i2c/muxes/Kconfig
+
+config I2C_HELPER_AUTO
+	bool "Autoselect pertinent helper modules"
+	default y
+	help
+	  Some I2C bus drivers require so-called "I2C algorithm" modules
+	  to work. These are basically software-only abstractions of generic
+	  I2C interfaces. This option will autoselect them so that you don't
+	  have to care.
+
+	  Unselect this only if you need to enable additional helper
+	  modules, for example for use with external I2C bus drivers.
+
+	  In doubt, say Y.
+
+config I2C_SMBUS
+	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+	help
+	  Say Y here if you want support for SMBus extensions to the I2C
+	  specification. At the moment, two extensions are supported:
+	  the SMBus Alert protocol and the SMBus Host Notify protocol.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-smbus.
+
+source drivers/i2c/algos/Kconfig
+source drivers/i2c/busses/Kconfig
+
+config I2C_STUB
+	tristate "I2C/SMBus Test Stub"
+	depends on m
+	default 'n'
+	help
+	  This module may be useful to developers of SMBus client drivers,
+	  especially for certain kinds of sensor chips.
+
+	  If you do build this module, be sure to read the notes and warnings
+	  in <file:Documentation/i2c/i2c-stub>.
+
+	  If you don't know what to do here, definitely say N.
+
+config I2C_SLAVE
+	bool "I2C slave support"
+
+if I2C_SLAVE
+
+config I2C_SLAVE_EEPROM
+	tristate "I2C eeprom slave driver"
+
+endif
+
+config I2C_DEBUG_CORE
+	bool "I2C Core debugging messages"
+	help
+	  Say Y here if you want the I2C core to produce a bunch of debug
+	  messages to the system log.  Select this if you are having a
+	  problem with I2C support and want to see more of what is going on.
+
+config I2C_DEBUG_ALGO
+	bool "I2C Algorithm debugging messages"
+	help
+	  Say Y here if you want the I2C algorithm drivers to produce a bunch
+	  of debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+config I2C_DEBUG_BUS
+	bool "I2C Bus debugging messages"
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you want the I2C bus drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+endif # I2C
+
+endmenu
diff --git a/src/kernel/linux/v4.14/drivers/i2c/Makefile b/src/kernel/linux/v4.14/drivers/i2c/Makefile
new file mode 100644
index 0000000..72c94c6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the i2c core.
+#
+
+obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
+obj-$(CONFIG_I2C)		+= i2c-core.o
+i2c-core-objs 			:= i2c-core-base.o i2c-core-smbus.o
+i2c-core-$(CONFIG_ACPI)		+= i2c-core-acpi.o
+i2c-core-$(CONFIG_I2C_SLAVE) 	+= i2c-core-slave.o
+i2c-core-$(CONFIG_OF) 		+= i2c-core-of.o
+
+obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
+obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
+obj-$(CONFIG_I2C_MUX)		+= i2c-mux.o
+obj-y				+= algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
+obj-$(CONFIG_I2C_SLAVE_EEPROM)	+= i2c-slave-eeprom.o
+
+ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
+CFLAGS_i2c-core-base.o := -Wno-deprecated-declarations
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/Kconfig b/src/kernel/linux/v4.14/drivers/i2c/algos/Kconfig
new file mode 100644
index 0000000..f1cfe7e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/Kconfig
@@ -0,0 +1,17 @@
+#
+# I2C algorithm drivers configuration
+#
+
+menu "I2C Algorithms"
+	visible if !I2C_HELPER_AUTO
+
+config I2C_ALGOBIT
+	tristate "I2C bit-banging interfaces"
+
+config I2C_ALGOPCF
+	tristate "I2C PCF 8584 interfaces"
+
+config I2C_ALGOPCA
+	tristate "I2C PCA 9564 interfaces"
+
+endmenu
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/Makefile b/src/kernel/linux/v4.14/drivers/i2c/algos/Makefile
new file mode 100644
index 0000000..215303f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the i2c algorithms
+#
+
+obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
+obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
+obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
+
+ccflags-$(CONFIG_I2C_DEBUG_ALGO) := -DDEBUG
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-bit.c b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-bit.c
new file mode 100644
index 0000000..1147bdd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-bit.c
@@ -0,0 +1,678 @@
+/* -------------------------------------------------------------------------
+ * i2c-algo-bit.c i2c driver algorithms for bit-shift adapters
+ * -------------------------------------------------------------------------
+ *   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+ * ------------------------------------------------------------------------- */
+
+/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
+   <kmalkki@cc.hut.fi> and Jean Delvare <jdelvare@suse.de> */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+
+/* ----- global defines ----------------------------------------------- */
+
+#ifdef DEBUG
+#define bit_dbg(level, dev, format, args...) \
+	do { \
+		if (i2c_debug >= level) \
+			dev_dbg(dev, format, ##args); \
+	} while (0)
+#else
+#define bit_dbg(level, dev, format, args...) \
+	do {} while (0)
+#endif /* DEBUG */
+
+/* ----- global variables ---------------------------------------------	*/
+
+static int bit_test;	/* see if the line-setting functions work	*/
+module_param(bit_test, int, S_IRUGO);
+MODULE_PARM_DESC(bit_test, "lines testing - 0 off; 1 report; 2 fail if stuck");
+
+#ifdef DEBUG
+static int i2c_debug = 1;
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(i2c_debug,
+		 "debug level - 0 off; 1 normal; 2 verbose; 3 very verbose");
+#endif
+
+/* --- setting states on the bus with the right timing: ---------------	*/
+
+#define setsda(adap, val)	adap->setsda(adap->data, val)
+#define setscl(adap, val)	adap->setscl(adap->data, val)
+#define getsda(adap)		adap->getsda(adap->data)
+#define getscl(adap)		adap->getscl(adap->data)
+
+static inline void sdalo(struct i2c_algo_bit_data *adap)
+{
+	setsda(adap, 0);
+	udelay((adap->udelay + 1) / 2);
+}
+
+static inline void sdahi(struct i2c_algo_bit_data *adap)
+{
+	setsda(adap, 1);
+	udelay((adap->udelay + 1) / 2);
+}
+
+static inline void scllo(struct i2c_algo_bit_data *adap)
+{
+	setscl(adap, 0);
+	udelay(adap->udelay / 2);
+}
+
+/*
+ * Raise scl line, and do checking for delays. This is necessary for slower
+ * devices.
+ */
+static int sclhi(struct i2c_algo_bit_data *adap)
+{
+	unsigned long start;
+
+	setscl(adap, 1);
+
+	/* Not all adapters have scl sense line... */
+	if (!adap->getscl)
+		goto done;
+
+	start = jiffies;
+	while (!getscl(adap)) {
+		/* This hw knows how to read the clock line, so we wait
+		 * until it actually gets high.  This is safer as some
+		 * chips may hold it low ("clock stretching") while they
+		 * are processing data internally.
+		 */
+		if (time_after(jiffies, start + adap->timeout)) {
+			/* Test one last time, as we may have been preempted
+			 * between last check and timeout test.
+			 */
+			if (getscl(adap))
+				break;
+			return -ETIMEDOUT;
+		}
+		cpu_relax();
+	}
+#ifdef DEBUG
+	if (jiffies != start && i2c_debug >= 3)
+		pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go "
+			 "high\n", jiffies - start);
+#endif
+
+done:
+	udelay(adap->udelay);
+	return 0;
+}
+
+
+/* --- other auxiliary functions --------------------------------------	*/
+static void i2c_start(struct i2c_algo_bit_data *adap)
+{
+	/* assert: scl, sda are high */
+	setsda(adap, 0);
+	udelay(adap->udelay);
+	scllo(adap);
+}
+
+static void i2c_repstart(struct i2c_algo_bit_data *adap)
+{
+	/* assert: scl is low */
+	sdahi(adap);
+	sclhi(adap);
+	setsda(adap, 0);
+	udelay(adap->udelay);
+	scllo(adap);
+}
+
+
+static void i2c_stop(struct i2c_algo_bit_data *adap)
+{
+	/* assert: scl is low */
+	sdalo(adap);
+	sclhi(adap);
+	setsda(adap, 1);
+	udelay(adap->udelay);
+}
+
+
+
+/* send a byte without start cond., look for arbitration,
+   check ackn. from slave */
+/* returns:
+ * 1 if the device acknowledged
+ * 0 if the device did not ack
+ * -ETIMEDOUT if an error occurred (while raising the scl line)
+ */
+static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c)
+{
+	int i;
+	int sb;
+	int ack;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	/* assert: scl is low */
+	for (i = 7; i >= 0; i--) {
+		sb = (c >> i) & 1;
+		setsda(adap, sb);
+		udelay((adap->udelay + 1) / 2);
+		if (sclhi(adap) < 0) { /* timed out */
+			bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+				"timeout at bit #%d\n", (int)c, i);
+			return -ETIMEDOUT;
+		}
+		/* FIXME do arbitration here:
+		 * if (sb && !getsda(adap)) -> ouch! Get out of here.
+		 *
+		 * Report a unique code, so higher level code can retry
+		 * the whole (combined) message and *NOT* issue STOP.
+		 */
+		scllo(adap);
+	}
+	sdahi(adap);
+	if (sclhi(adap) < 0) { /* timeout */
+		bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+			"timeout at ack\n", (int)c);
+		return -ETIMEDOUT;
+	}
+
+	/* read ack: SDA should be pulled down by slave, or it may
+	 * NAK (usually to report problems with the data we wrote).
+	 */
+	ack = !getsda(adap);    /* ack: sda is pulled low -> success */
+	bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
+		ack ? "A" : "NA");
+
+	scllo(adap);
+	return ack;
+	/* assert: scl is low (sda undef) */
+}
+
+
+static int i2c_inb(struct i2c_adapter *i2c_adap)
+{
+	/* read byte via i2c port, without start/stop sequence	*/
+	/* acknowledge is sent in i2c_read.			*/
+	int i;
+	unsigned char indata = 0;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	/* assert: scl is low */
+	sdahi(adap);
+	for (i = 0; i < 8; i++) {
+		if (sclhi(adap) < 0) { /* timeout */
+			bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
+				"#%d\n", 7 - i);
+			return -ETIMEDOUT;
+		}
+		indata *= 2;
+		if (getsda(adap))
+			indata |= 0x01;
+		setscl(adap, 0);
+		udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
+	}
+	/* assert: scl is low */
+	return indata;
+}
+
+/*
+ * Sanity check for the adapter hardware - check the reaction of
+ * the bus lines only if it seems to be idle.
+ */
+static int test_bus(struct i2c_adapter *i2c_adap)
+{
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	const char *name = i2c_adap->name;
+	int scl, sda, ret;
+
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return -ENODEV;
+	}
+
+	if (adap->getscl == NULL)
+		pr_info("%s: Testing SDA only, SCL is not readable\n", name);
+
+	sda = getsda(adap);
+	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+	if (!scl || !sda) {
+		printk(KERN_WARNING
+		       "%s: bus seems to be busy (scl=%d, sda=%d)\n",
+		       name, scl, sda);
+		goto bailout;
+	}
+
+	sdalo(adap);
+	sda = getsda(adap);
+	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+	if (sda) {
+		printk(KERN_WARNING "%s: SDA stuck high!\n", name);
+		goto bailout;
+	}
+	if (!scl) {
+		printk(KERN_WARNING "%s: SCL unexpected low "
+		       "while pulling SDA low!\n", name);
+		goto bailout;
+	}
+
+	sdahi(adap);
+	sda = getsda(adap);
+	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+	if (!sda) {
+		printk(KERN_WARNING "%s: SDA stuck low!\n", name);
+		goto bailout;
+	}
+	if (!scl) {
+		printk(KERN_WARNING "%s: SCL unexpected low "
+		       "while pulling SDA high!\n", name);
+		goto bailout;
+	}
+
+	scllo(adap);
+	sda = getsda(adap);
+	scl = (adap->getscl == NULL) ? 0 : getscl(adap);
+	if (scl) {
+		printk(KERN_WARNING "%s: SCL stuck high!\n", name);
+		goto bailout;
+	}
+	if (!sda) {
+		printk(KERN_WARNING "%s: SDA unexpected low "
+		       "while pulling SCL low!\n", name);
+		goto bailout;
+	}
+
+	sclhi(adap);
+	sda = getsda(adap);
+	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+	if (!scl) {
+		printk(KERN_WARNING "%s: SCL stuck low!\n", name);
+		goto bailout;
+	}
+	if (!sda) {
+		printk(KERN_WARNING "%s: SDA unexpected low "
+		       "while pulling SCL high!\n", name);
+		goto bailout;
+	}
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
+	pr_info("%s: Test OK\n", name);
+	return 0;
+bailout:
+	sdahi(adap);
+	sclhi(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
+	return -ENODEV;
+}
+
+/* ----- Utility functions
+ */
+
+/* try_address tries to contact a chip for a number of
+ * times before it gives up.
+ * return values:
+ * 1 chip answered
+ * 0 chip did not answer
+ * -x transmission error
+ */
+static int try_address(struct i2c_adapter *i2c_adap,
+		       unsigned char addr, int retries)
+{
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	int i, ret = 0;
+
+	for (i = 0; i <= retries; i++) {
+		ret = i2c_outb(i2c_adap, addr);
+		if (ret == 1 || i == retries)
+			break;
+		bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
+		i2c_stop(adap);
+		udelay(adap->udelay);
+		yield();
+		bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
+		i2c_start(adap);
+	}
+	if (i && ret)
+		bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at "
+			"0x%02x: %s\n", i + 1,
+			addr & 1 ? "read from" : "write to", addr >> 1,
+			ret == 1 ? "success" : "failed, timeout?");
+	return ret;
+}
+
+static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+{
+	const unsigned char *temp = msg->buf;
+	int count = msg->len;
+	unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
+	int retval;
+	int wrcount = 0;
+
+	while (count > 0) {
+		retval = i2c_outb(i2c_adap, *temp);
+
+		/* OK/ACK; or ignored NAK */
+		if ((retval > 0) || (nak_ok && (retval == 0))) {
+			count--;
+			temp++;
+			wrcount++;
+
+		/* A slave NAKing the master means the slave didn't like
+		 * something about the data it saw.  For example, maybe
+		 * the SMBus PEC was wrong.
+		 */
+		} else if (retval == 0) {
+			dev_err(&i2c_adap->dev, "sendbytes: NAK bailout.\n");
+			return -EIO;
+
+		/* Timeout; or (someday) lost arbitration
+		 *
+		 * FIXME Lost ARB implies retrying the transaction from
+		 * the first message, after the "winning" master issues
+		 * its STOP.  As a rule, upper layer code has no reason
+		 * to know or care about this ... it is *NOT* an error.
+		 */
+		} else {
+			dev_err(&i2c_adap->dev, "sendbytes: error %d\n",
+					retval);
+			return retval;
+		}
+	}
+	return wrcount;
+}
+
+static int acknak(struct i2c_adapter *i2c_adap, int is_ack)
+{
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	/* assert: sda is high */
+	if (is_ack)		/* send ack */
+		setsda(adap, 0);
+	udelay((adap->udelay + 1) / 2);
+	if (sclhi(adap) < 0) {	/* timeout */
+		dev_err(&i2c_adap->dev, "readbytes: ack/nak timeout\n");
+		return -ETIMEDOUT;
+	}
+	scllo(adap);
+	return 0;
+}
+
+static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+{
+	int inval;
+	int rdcount = 0;	/* counts bytes read */
+	unsigned char *temp = msg->buf;
+	int count = msg->len;
+	const unsigned flags = msg->flags;
+
+	while (count > 0) {
+		inval = i2c_inb(i2c_adap);
+		if (inval >= 0) {
+			*temp = inval;
+			rdcount++;
+		} else {   /* read timed out */
+			break;
+		}
+
+		temp++;
+		count--;
+
+		/* Some SMBus transactions require that we receive the
+		   transaction length as the first read byte. */
+		if (rdcount == 1 && (flags & I2C_M_RECV_LEN)) {
+			if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
+				if (!(flags & I2C_M_NO_RD_ACK))
+					acknak(i2c_adap, 0);
+				dev_err(&i2c_adap->dev, "readbytes: invalid "
+					"block length (%d)\n", inval);
+				return -EPROTO;
+			}
+			/* The original count value accounts for the extra
+			   bytes, that is, either 1 for a regular transaction,
+			   or 2 for a PEC transaction. */
+			count += inval;
+			msg->len += inval;
+		}
+
+		bit_dbg(2, &i2c_adap->dev, "readbytes: 0x%02x %s\n",
+			inval,
+			(flags & I2C_M_NO_RD_ACK)
+				? "(no ack/nak)"
+				: (count ? "A" : "NA"));
+
+		if (!(flags & I2C_M_NO_RD_ACK)) {
+			inval = acknak(i2c_adap, count);
+			if (inval < 0)
+				return inval;
+		}
+	}
+	return rdcount;
+}
+
+/* doAddress initiates the transfer by generating the start condition (in
+ * try_address) and transmits the address in the necessary format to handle
+ * reads, writes as well as 10bit-addresses.
+ * returns:
+ *  0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
+ * -x an error occurred (like: -ENXIO if the device did not answer, or
+ *	-ETIMEDOUT, for example if the lines are stuck...)
+ */
+static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+{
+	unsigned short flags = msg->flags;
+	unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	unsigned char addr;
+	int ret, retries;
+
+	retries = nak_ok ? 0 : i2c_adap->retries;
+
+	if (flags & I2C_M_TEN) {
+		/* a ten bit address */
+		addr = 0xf0 | ((msg->addr >> 7) & 0x06);
+		bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
+		/* try extended address code...*/
+		ret = try_address(i2c_adap, addr, retries);
+		if ((ret != 1) && !nak_ok)  {
+			dev_err(&i2c_adap->dev,
+				"died at extended address code\n");
+			return -ENXIO;
+		}
+		/* the remaining 8 bit address */
+		ret = i2c_outb(i2c_adap, msg->addr & 0xff);
+		if ((ret != 1) && !nak_ok) {
+			/* the chip did not ack / xmission error occurred */
+			dev_err(&i2c_adap->dev, "died at 2nd address code\n");
+			return -ENXIO;
+		}
+		if (flags & I2C_M_RD) {
+			bit_dbg(3, &i2c_adap->dev, "emitting repeated "
+				"start condition\n");
+			i2c_repstart(adap);
+			/* okay, now switch into reading mode */
+			addr |= 0x01;
+			ret = try_address(i2c_adap, addr, retries);
+			if ((ret != 1) && !nak_ok) {
+				dev_err(&i2c_adap->dev,
+					"died at repeated address code\n");
+				return -EIO;
+			}
+		}
+	} else {		/* normal 7bit address	*/
+		addr = msg->addr << 1;
+		if (flags & I2C_M_RD)
+			addr |= 1;
+		if (flags & I2C_M_REV_DIR_ADDR)
+			addr ^= 1;
+		ret = try_address(i2c_adap, addr, retries);
+		if ((ret != 1) && !nak_ok)
+			return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int bit_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg msgs[], int num)
+{
+	struct i2c_msg *pmsg;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	int i, ret;
+	unsigned short nak_ok;
+
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return ret;
+	}
+
+	bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
+	i2c_start(adap);
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			if (i) {
+				if (msgs[i - 1].flags & I2C_M_STOP) {
+					bit_dbg(3, &i2c_adap->dev,
+						"emitting enforced stop/start condition\n");
+					i2c_stop(adap);
+					i2c_start(adap);
+				} else {
+					bit_dbg(3, &i2c_adap->dev,
+						"emitting repeated start condition\n");
+					i2c_repstart(adap);
+				}
+			}
+			ret = bit_doAddress(i2c_adap, pmsg);
+			if ((ret != 0) && !nak_ok) {
+				bit_dbg(1, &i2c_adap->dev, "NAK from "
+					"device addr 0x%02x msg #%d\n",
+					msgs[i].addr, i);
+				goto bailout;
+			}
+		}
+		if (pmsg->flags & I2C_M_RD) {
+			/* read bytes into buffer*/
+			ret = readbytes(i2c_adap, pmsg);
+			if (ret >= 1)
+				bit_dbg(2, &i2c_adap->dev, "read %d byte%s\n",
+					ret, ret == 1 ? "" : "s");
+			if (ret < pmsg->len) {
+				if (ret >= 0)
+					ret = -EIO;
+				goto bailout;
+			}
+		} else {
+			/* write bytes from buffer */
+			ret = sendbytes(i2c_adap, pmsg);
+			if (ret >= 1)
+				bit_dbg(2, &i2c_adap->dev, "wrote %d byte%s\n",
+					ret, ret == 1 ? "" : "s");
+			if (ret < pmsg->len) {
+				if (ret >= 0)
+					ret = -EIO;
+				goto bailout;
+			}
+		}
+	}
+	ret = i;
+
+bailout:
+	bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
+	i2c_stop(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+	return ret;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+const struct i2c_algorithm i2c_bit_algo = {
+	.master_xfer	= bit_xfer,
+	.functionality	= bit_func,
+};
+EXPORT_SYMBOL(i2c_bit_algo);
+
+static const struct i2c_adapter_quirks i2c_bit_quirk_no_clk_stretch = {
+	.flags = I2C_AQ_NO_CLK_STRETCH,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+static int __i2c_bit_add_bus(struct i2c_adapter *adap,
+			     int (*add_adapter)(struct i2c_adapter *))
+{
+	struct i2c_algo_bit_data *bit_adap = adap->algo_data;
+	int ret;
+
+	if (bit_test) {
+		ret = test_bus(adap);
+		if (bit_test >= 2 && ret < 0)
+			return -ENODEV;
+	}
+
+	/* register new adapter to i2c module... */
+	adap->algo = &i2c_bit_algo;
+	adap->retries = 3;
+	if (bit_adap->getscl == NULL)
+		adap->quirks = &i2c_bit_quirk_no_clk_stretch;
+
+	ret = add_adapter(adap);
+	if (ret < 0)
+		return ret;
+
+	/* Complain if SCL can't be read */
+	if (bit_adap->getscl == NULL) {
+		dev_warn(&adap->dev, "Not I2C compliant: can't read SCL\n");
+		dev_warn(&adap->dev, "Bus may be unreliable\n");
+	}
+	return 0;
+}
+
+int i2c_bit_add_bus(struct i2c_adapter *adap)
+{
+	return __i2c_bit_add_bus(adap, i2c_add_adapter);
+}
+EXPORT_SYMBOL(i2c_bit_add_bus);
+
+int i2c_bit_add_numbered_bus(struct i2c_adapter *adap)
+{
+	return __i2c_bit_add_bus(adap, i2c_add_numbered_adapter);
+}
+EXPORT_SYMBOL(i2c_bit_add_numbered_bus);
+
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pca.c b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pca.c
new file mode 100644
index 0000000..1886588
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pca.c
@@ -0,0 +1,573 @@
+/*
+ *  i2c-algo-pca.c i2c driver algorithms for PCA9564 adapters
+ *    Copyright (C) 2004 Arcom Control Systems
+ *    Copyright (C) 2008 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pca.h>
+
+#define DEB1(fmt, args...) do { if (i2c_debug >= 1)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB2(fmt, args...) do { if (i2c_debug >= 2)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB3(fmt, args...) do { if (i2c_debug >= 3)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
+
+static int i2c_debug;
+
+#define pca_outw(adap, reg, val) adap->write_byte(adap->data, reg, val)
+#define pca_inw(adap, reg) adap->read_byte(adap->data, reg)
+
+#define pca_status(adap) pca_inw(adap, I2C_PCA_STA)
+#define pca_clock(adap) adap->i2c_clock
+#define pca_set_con(adap, val) pca_outw(adap, I2C_PCA_CON, val)
+#define pca_get_con(adap) pca_inw(adap, I2C_PCA_CON)
+#define pca_wait(adap) adap->wait_for_completion(adap->data)
+
+static void pca_reset(struct i2c_algo_pca_data *adap)
+{
+	if (adap->chip == I2C_PCA_CHIP_9665) {
+		/* Ignore the reset function from the module,
+		 * we can use the parallel bus reset.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
+		pca_outw(adap, I2C_PCA_IND, 0xA5);
+		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
+	} else {
+		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
+	}
+}
+
+/*
+ * Generate a start condition on the i2c bus.
+ *
+ * returns after the start condition has occurred
+ */
+static int pca_start(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== START\n");
+	sta |= I2C_PCA_CON_STA;
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+	return pca_wait(adap);
+}
+
+/*
+ * Generate a repeated start condition on the i2c bus
+ *
+ * return after the repeated start condition has occurred
+ */
+static int pca_repeated_start(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== REPEATED START\n");
+	sta |= I2C_PCA_CON_STA;
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+	return pca_wait(adap);
+}
+
+/*
+ * Generate a stop condition on the i2c bus
+ *
+ * returns after the stop condition has been generated
+ *
+ * STOPs do not generate an interrupt or set the SI flag, since the
+ * part returns the idle state (0xf8). Hence we don't need to
+ * pca_wait here.
+ */
+static void pca_stop(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== STOP\n");
+	sta |= I2C_PCA_CON_STO;
+	sta &= ~(I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+}
+
+/*
+ * Send the slave address and R/W bit
+ *
+ * returns after the address has been sent
+ */
+static int pca_address(struct i2c_algo_pca_data *adap,
+		       struct i2c_msg *msg)
+{
+	int sta = pca_get_con(adap);
+	int addr;
+
+	addr = ((0x7f & msg->addr) << 1);
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+	DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
+	     msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
+
+	pca_outw(adap, I2C_PCA_DAT, addr);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+
+	return pca_wait(adap);
+}
+
+/*
+ * Transmit a byte.
+ *
+ * Returns after the byte has been transmitted
+ */
+static int pca_tx_byte(struct i2c_algo_pca_data *adap,
+		       __u8 b)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== WRITE %#04x\n", b);
+	pca_outw(adap, I2C_PCA_DAT, b);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+
+	return pca_wait(adap);
+}
+
+/*
+ * Receive a byte
+ *
+ * returns immediately.
+ */
+static void pca_rx_byte(struct i2c_algo_pca_data *adap,
+			__u8 *b, int ack)
+{
+	*b = pca_inw(adap, I2C_PCA_DAT);
+	DEB2("=== READ %#04x %s\n", *b, ack ? "ACK" : "NACK");
+}
+
+/*
+ * Setup ACK or NACK for next received byte and wait for it to arrive.
+ *
+ * Returns after next byte has arrived.
+ */
+static int pca_rx_ack(struct i2c_algo_pca_data *adap,
+		      int ack)
+{
+	int sta = pca_get_con(adap);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI|I2C_PCA_CON_AA);
+
+	if (ack)
+		sta |= I2C_PCA_CON_AA;
+
+	pca_set_con(adap, sta);
+	return pca_wait(adap);
+}
+
+static int pca_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs,
+		    int num)
+{
+	struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *msg = NULL;
+	int curmsg;
+	int numbytes = 0;
+	int state;
+	int ret;
+	int completed = 1;
+	unsigned long timeout = jiffies + i2c_adap->timeout;
+
+	while ((state = pca_status(adap)) != 0xf8) {
+		if (time_before(jiffies, timeout)) {
+			msleep(10);
+		} else {
+			dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
+				"%#04x\n", state);
+			return -EBUSY;
+		}
+	}
+
+	DEB1("{{{ XFER %d messages\n", num);
+
+	if (i2c_debug >= 2) {
+		for (curmsg = 0; curmsg < num; curmsg++) {
+			int addr, i;
+			msg = &msgs[curmsg];
+
+			addr = (0x7f & msg->addr) ;
+
+			if (msg->flags & I2C_M_RD)
+				printk(KERN_INFO "    [%02d] RD %d bytes from %#02x [%#02x, ...]\n",
+				       curmsg, msg->len, addr, (addr << 1) | 1);
+			else {
+				printk(KERN_INFO "    [%02d] WR %d bytes to %#02x [%#02x%s",
+				       curmsg, msg->len, addr, addr << 1,
+				       msg->len == 0 ? "" : ", ");
+				for (i = 0; i < msg->len; i++)
+					printk("%#04x%s", msg->buf[i], i == msg->len - 1 ? "" : ", ");
+				printk("]\n");
+			}
+		}
+	}
+
+	curmsg = 0;
+	ret = -EIO;
+	while (curmsg < num) {
+		state = pca_status(adap);
+
+		DEB3("STATE is 0x%02x\n", state);
+		msg = &msgs[curmsg];
+
+		switch (state) {
+		case 0xf8: /* On reset or stop the bus is idle */
+			completed = pca_start(adap);
+			break;
+
+		case 0x08: /* A START condition has been transmitted */
+		case 0x10: /* A repeated start condition has been transmitted */
+			completed = pca_address(adap, msg);
+			break;
+
+		case 0x18: /* SLA+W has been transmitted; ACK has been received */
+		case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */
+			if (numbytes < msg->len) {
+				completed = pca_tx_byte(adap,
+							msg->buf[numbytes]);
+				numbytes++;
+				break;
+			}
+			curmsg++; numbytes = 0;
+			if (curmsg == num)
+				pca_stop(adap);
+			else
+				completed = pca_repeated_start(adap);
+			break;
+
+		case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after SLA+W\n");
+			pca_stop(adap);
+			ret = -ENXIO;
+			goto out;
+
+		case 0x40: /* SLA+R has been transmitted; ACK has been received */
+			completed = pca_rx_ack(adap, msg->len > 1);
+			break;
+
+		case 0x50: /* Data bytes has been received; ACK has been returned */
+			if (numbytes < msg->len) {
+				pca_rx_byte(adap, &msg->buf[numbytes], 1);
+				numbytes++;
+				completed = pca_rx_ack(adap,
+						       numbytes < msg->len - 1);
+				break;
+			}
+			curmsg++; numbytes = 0;
+			if (curmsg == num)
+				pca_stop(adap);
+			else
+				completed = pca_repeated_start(adap);
+			break;
+
+		case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after SLA+R\n");
+			pca_stop(adap);
+			ret = -ENXIO;
+			goto out;
+
+		case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after data byte\n");
+			pca_stop(adap);
+			goto out;
+
+		case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
+			DEB2("Arbitration lost\n");
+			/*
+			 * The PCA9564 data sheet (2006-09-01) says "A
+			 * START condition will be transmitted when the
+			 * bus becomes free (STOP or SCL and SDA high)"
+			 * when the STA bit is set (p. 11).
+			 *
+			 * In case this won't work, try pca_reset()
+			 * instead.
+			 */
+			pca_start(adap);
+			goto out;
+
+		case 0x58: /* Data byte has been received; NOT ACK has been returned */
+			if (numbytes == msg->len - 1) {
+				pca_rx_byte(adap, &msg->buf[numbytes], 0);
+				curmsg++; numbytes = 0;
+				if (curmsg == num)
+					pca_stop(adap);
+				else
+					completed = pca_repeated_start(adap);
+			} else {
+				DEB2("NOT ACK sent after data byte received. "
+				     "Not final byte. numbytes %d. len %d\n",
+				     numbytes, msg->len);
+				pca_stop(adap);
+				goto out;
+			}
+			break;
+		case 0x70: /* Bus error - SDA stuck low */
+			DEB2("BUS ERROR - SDA Stuck low\n");
+			pca_reset(adap);
+			goto out;
+		case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+		case 0x90: /* Bus error - SCL stuck low (PCA9564) */
+			DEB2("BUS ERROR - SCL Stuck low\n");
+			pca_reset(adap);
+			goto out;
+		case 0x00: /* Bus error during master or slave mode due to illegal START or STOP condition */
+			DEB2("BUS ERROR - Illegal START or STOP\n");
+			pca_reset(adap);
+			goto out;
+		default:
+			dev_err(&i2c_adap->dev, "unhandled SIO state 0x%02x\n", state);
+			break;
+		}
+
+		if (!completed)
+			goto out;
+	}
+
+	ret = curmsg;
+ out:
+	DEB1("}}} transferred %d/%d messages. "
+	     "status is %#04x. control is %#04x\n",
+	     curmsg, num, pca_status(adap),
+	     pca_get_con(adap));
+	return ret;
+}
+
+static u32 pca_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm pca_algo = {
+	.master_xfer	= pca_xfer,
+	.functionality	= pca_func,
+};
+
+static unsigned int pca_probe_chip(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pca_data *pca_data = adap->algo_data;
+	/* The trick here is to check if there is an indirect register
+	 * available. If there is one, we will read the value we first
+	 * wrote on I2C_PCA_IADR. Otherwise, we will read the last value
+	 * we wrote on I2C_PCA_ADR
+	 */
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+	pca_outw(pca_data, I2C_PCA_IND, 0xAA);
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ITO);
+	pca_outw(pca_data, I2C_PCA_IND, 0x00);
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+	if (pca_inw(pca_data, I2C_PCA_IND) == 0xAA) {
+		printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name);
+		pca_data->chip = I2C_PCA_CHIP_9665;
+	} else {
+		printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name);
+		pca_data->chip = I2C_PCA_CHIP_9564;
+	}
+	return pca_data->chip;
+}
+
+static int pca_init(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pca_data *pca_data = adap->algo_data;
+
+	adap->algo = &pca_algo;
+
+	if (pca_probe_chip(adap) == I2C_PCA_CHIP_9564) {
+		static int freqs[] = {330, 288, 217, 146, 88, 59, 44, 36};
+		int clock;
+
+		if (pca_data->i2c_clock > 7) {
+			switch (pca_data->i2c_clock) {
+			case 330000:
+				pca_data->i2c_clock = I2C_PCA_CON_330kHz;
+				break;
+			case 288000:
+				pca_data->i2c_clock = I2C_PCA_CON_288kHz;
+				break;
+			case 217000:
+				pca_data->i2c_clock = I2C_PCA_CON_217kHz;
+				break;
+			case 146000:
+				pca_data->i2c_clock = I2C_PCA_CON_146kHz;
+				break;
+			case 88000:
+				pca_data->i2c_clock = I2C_PCA_CON_88kHz;
+				break;
+			case 59000:
+				pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+				break;
+			case 44000:
+				pca_data->i2c_clock = I2C_PCA_CON_44kHz;
+				break;
+			case 36000:
+				pca_data->i2c_clock = I2C_PCA_CON_36kHz;
+				break;
+			default:
+				printk(KERN_WARNING
+					"%s: Invalid I2C clock speed selected."
+					" Using default 59kHz.\n", adap->name);
+			pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+			}
+		} else {
+			printk(KERN_WARNING "%s: "
+				"Choosing the clock frequency based on "
+				"index is deprecated."
+				" Use the nominal frequency.\n", adap->name);
+		}
+
+		clock = pca_clock(pca_data);
+		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
+		     adap->name, freqs[clock]);
+
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
+	} else {
+		int clock;
+		int mode;
+		int tlow, thi;
+		/* Values can be found on PCA9665 datasheet section 7.3.2.6 */
+		int min_tlow, min_thi;
+		/* These values are the maximum raise and fall values allowed
+		 * by the I2C operation mode (Standard, Fast or Fast+)
+		 * They are used (added) below to calculate the clock dividers
+		 * of PCA9665. Note that they are slightly different of the
+		 * real maximum, to allow the change on mode exactly on the
+		 * maximum clock rate for each mode
+		 */
+		int raise_fall_time;
+
+		if (pca_data->i2c_clock > 1265800) {
+			printk(KERN_WARNING "%s: I2C clock speed too high."
+				" Using 1265.8kHz.\n", adap->name);
+			pca_data->i2c_clock = 1265800;
+		}
+
+		if (pca_data->i2c_clock < 60300) {
+			printk(KERN_WARNING "%s: I2C clock speed too low."
+				" Using 60.3kHz.\n", adap->name);
+			pca_data->i2c_clock = 60300;
+		}
+
+		/* To avoid integer overflow, use clock/100 for calculations */
+		clock = pca_clock(pca_data) / 100;
+
+		if (pca_data->i2c_clock > 1000000) {
+			mode = I2C_PCA_MODE_TURBO;
+			min_tlow = 14;
+			min_thi  = 5;
+			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+		} else if (pca_data->i2c_clock > 400000) {
+			mode = I2C_PCA_MODE_FASTP;
+			min_tlow = 17;
+			min_thi  = 9;
+			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+		} else if (pca_data->i2c_clock > 100000) {
+			mode = I2C_PCA_MODE_FAST;
+			min_tlow = 44;
+			min_thi  = 20;
+			raise_fall_time = 58; /* Raise 29e-8s, Fall 29e-8s */
+		} else {
+			mode = I2C_PCA_MODE_STD;
+			min_tlow = 157;
+			min_thi  = 134;
+			raise_fall_time = 127; /* Raise 29e-8s, Fall 98e-8s */
+		}
+
+		/* The minimum clock that respects the thi/tlow = 134/157 is
+		 * 64800 Hz. Below that, we have to fix the tlow to 255 and
+		 * calculate the thi factor.
+		 */
+		if (clock < 648) {
+			tlow = 255;
+			thi = 1000000 - clock * raise_fall_time;
+			thi /= (I2C_PCA_OSC_PER * clock) - tlow;
+		} else {
+			tlow = (1000000 - clock * raise_fall_time) * min_tlow;
+			tlow /= I2C_PCA_OSC_PER * clock * (min_thi + min_tlow);
+			thi = tlow * min_thi / min_tlow;
+		}
+
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
+		pca_reset(pca_data);
+
+		printk(KERN_INFO
+		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
+	}
+	udelay(500); /* 500 us for oscillator to stabilise */
+
+	return 0;
+}
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_pca_add_bus(struct i2c_adapter *adap)
+{
+	int rval;
+
+	rval = pca_init(adap);
+	if (rval)
+		return rval;
+
+	return i2c_add_adapter(adap);
+}
+EXPORT_SYMBOL(i2c_pca_add_bus);
+
+int i2c_pca_add_numbered_bus(struct i2c_adapter *adap)
+{
+	int rval;
+
+	rval = pca_init(adap);
+	if (rval)
+		return rval;
+
+	return i2c_add_numbered_adapter(adap);
+}
+EXPORT_SYMBOL(i2c_pca_add_numbered_bus);
+
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, "
+	"Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(i2c_debug, int, 0);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.c b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.c
new file mode 100644
index 0000000..270d84b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.c
@@ -0,0 +1,436 @@
+/*
+ * i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters
+ *
+ *   Copyright (C) 1995-1997 Simon G. Vogl
+ *		   1998-2000 Hans Berglund
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
+ * <mbailey@littlefeet-inc.com>
+ *
+ * Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
+ * messages, proper stop/repstart signaling during receive, added detect code
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pcf.h>
+#include "i2c-algo-pcf.h"
+
+
+#define DEB2(x) if (i2c_debug >= 2) x
+#define DEB3(x) if (i2c_debug >= 3) x /* print several statistical values */
+#define DEBPROTO(x) if (i2c_debug >= 9) x;
+	/* debug the protocol by showing transferred bits */
+#define DEF_TIMEOUT 16
+
+/*
+ * module parameters:
+ */
+static int i2c_debug;
+
+/* setting states on the bus with the right timing: */
+
+#define set_pcf(adap, ctl, val) adap->setpcf(adap->data, ctl, val)
+#define get_pcf(adap, ctl) adap->getpcf(adap->data, ctl)
+#define get_own(adap) adap->getown(adap->data)
+#define get_clock(adap) adap->getclock(adap->data)
+#define i2c_outb(adap, val) adap->setpcf(adap->data, 0, val)
+#define i2c_inb(adap) adap->getpcf(adap->data, 0)
+
+/* other auxiliary functions */
+
+static void i2c_start(struct i2c_algo_pcf_data *adap)
+{
+	DEBPROTO(printk(KERN_DEBUG "S "));
+	set_pcf(adap, 1, I2C_PCF_START);
+}
+
+static void i2c_repstart(struct i2c_algo_pcf_data *adap)
+{
+	DEBPROTO(printk(" Sr "));
+	set_pcf(adap, 1, I2C_PCF_REPSTART);
+}
+
+static void i2c_stop(struct i2c_algo_pcf_data *adap)
+{
+	DEBPROTO(printk("P\n"));
+	set_pcf(adap, 1, I2C_PCF_STOP);
+}
+
+static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
+{
+	DEB2(printk(KERN_INFO
+		"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
+		*status));
+	/*
+	 * Cleanup from LAB -- reset and enable ESO.
+	 * This resets the PCF8584; since we've lost the bus, no
+	 * further attempts should be made by callers to clean up
+	 * (no i2c_stop() etc.)
+	 */
+	set_pcf(adap, 1, I2C_PCF_PIN);
+	set_pcf(adap, 1, I2C_PCF_ESO);
+	/*
+	 * We pause for a time period sufficient for any running
+	 * I2C transaction to complete -- the arbitration logic won't
+	 * work properly until the next START is seen.
+	 * It is assumed the bus driver or client has set a proper value.
+	 *
+	 * REVISIT: should probably use msleep instead of mdelay if we
+	 * know we can sleep.
+	 */
+	if (adap->lab_mdelay)
+		mdelay(adap->lab_mdelay);
+
+	DEB2(printk(KERN_INFO
+		"i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n",
+		get_pcf(adap, 1)));
+}
+
+static int wait_for_bb(struct i2c_algo_pcf_data *adap)
+{
+
+	int timeout = DEF_TIMEOUT;
+	int status;
+
+	status = get_pcf(adap, 1);
+
+	while (!(status & I2C_PCF_BB) && --timeout) {
+		udelay(100); /* wait for 100 us */
+		status = get_pcf(adap, 1);
+	}
+
+	if (timeout == 0) {
+		printk(KERN_ERR "Timeout waiting for Bus Busy\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
+{
+
+	int timeout = DEF_TIMEOUT;
+
+	*status = get_pcf(adap, 1);
+
+	while ((*status & I2C_PCF_PIN) && --timeout) {
+		adap->waitforpin(adap->data);
+		*status = get_pcf(adap, 1);
+	}
+	if (*status & I2C_PCF_LAB) {
+		handle_lab(adap, status);
+		return -EINTR;
+	}
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/*
+ * This should perform the 'PCF8584 initialization sequence' as described
+ * in the Philips IC12 data book (1995, Aug 29).
+ * There should be a 30 clock cycle wait after reset, I assume this
+ * has been fulfilled.
+ * There should be a delay at the end equal to the longest I2C message
+ * to synchronize the BB-bit (in multimaster systems). How long is
+ * this? I assume 1 second is always long enough.
+ *
+ * vdovikin: added detect code for PCF8584
+ */
+static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
+{
+	unsigned char temp;
+
+	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n",
+				get_pcf(adap, 1)));
+
+	/* S1=0x80: S0 selected, serial interface off */
+	set_pcf(adap, 1, I2C_PCF_PIN);
+	/*
+	 * check to see S1 now used as R/W ctrl -
+	 * PCF8584 does that when ESO is zero
+	 */
+	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
+		return -ENXIO; /* definitely not PCF8584 */
+	}
+
+	/* load own address in S0, effective address is (own << 1) */
+	i2c_outb(adap, get_own(adap));
+	/* check it's really written */
+	if ((temp = i2c_inb(adap)) != get_own(adap)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* S1=0xA0, next byte in S2 */
+	set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
+	/* check to see S2 now selected */
+	if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* load clock register S2 */
+	i2c_outb(adap, get_clock(adap));
+	/* check it's really written, the only 5 lowest bits does matter */
+	if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* Enable serial interface, idle, S0 selected */
+	set_pcf(adap, 1, I2C_PCF_IDLE);
+
+	/* check to see PCF is really idled and we can access status register */
+	if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
+
+	return 0;
+}
+
+static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
+			 int count, int last)
+{
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	int wrcount, status, timeout;
+
+	for (wrcount=0; wrcount<count; ++wrcount) {
+		DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
+				buf[wrcount] & 0xff));
+		i2c_outb(adap, buf[wrcount]);
+		timeout = wait_for_pin(adap, &status);
+		if (timeout) {
+			if (timeout == -EINTR)
+				return -EINTR; /* arbitration lost */
+
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_write: error - timeout.\n");
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+		if (status & I2C_PCF_LRB) {
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_write: error - no ack.\n");
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+	}
+	if (last)
+		i2c_stop(adap);
+	else
+		i2c_repstart(adap);
+
+	return wrcount;
+}
+
+static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
+			 int count, int last)
+{
+	int i, status;
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	int wfp;
+
+	/* increment number of bytes to read by one -- read dummy byte */
+	for (i = 0; i <= count; i++) {
+
+		if ((wfp = wait_for_pin(adap, &status))) {
+			if (wfp == -EINTR)
+				return -EINTR; /* arbitration lost */
+
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "pcf_readbytes timed out.\n");
+			return -1;
+		}
+
+		if ((status & I2C_PCF_LRB) && (i != count)) {
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_read: i2c_inb, No ack.\n");
+			return -1;
+		}
+
+		if (i == count - 1) {
+			set_pcf(adap, 1, I2C_PCF_ESO);
+		} else if (i == count) {
+			if (last)
+				i2c_stop(adap);
+			else
+				i2c_repstart(adap);
+		}
+
+		if (i)
+			buf[i - 1] = i2c_inb(adap);
+		else
+			i2c_inb(adap); /* dummy read */
+	}
+
+	return i - 1;
+}
+
+
+static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
+			 struct i2c_msg *msg)
+{
+	unsigned short flags = msg->flags;
+	unsigned char addr;
+
+	addr = msg->addr << 1;
+	if (flags & I2C_M_RD)
+		addr |= 1;
+	if (flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+	i2c_outb(adap, addr);
+
+	return 0;
+}
+
+static int pcf_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs,
+		    int num)
+{
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *pmsg;
+	int i;
+	int ret=0, timeout, status;
+
+	if (adap->xfer_begin)
+		adap->xfer_begin(adap->data);
+
+	/* Check for bus busy */
+	timeout = wait_for_bb(adap);
+	if (timeout) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
+			    "Timeout waiting for BB in pcf_xfer\n");)
+		i = -EIO;
+		goto out;
+	}
+
+	for (i = 0;ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+
+		DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+		     pmsg->flags & I2C_M_RD ? "read" : "write",
+		     pmsg->len, pmsg->addr, i + 1, num);)
+
+		ret = pcf_doAddress(adap, pmsg);
+
+		/* Send START */
+		if (i == 0)
+			i2c_start(adap);
+
+		/* Wait for PIN (pending interrupt NOT) */
+		timeout = wait_for_pin(adap, &status);
+		if (timeout) {
+			if (timeout == -EINTR) {
+				/* arbitration lost */
+				i = -EINTR;
+				goto out;
+			}
+			i2c_stop(adap);
+			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
+				    "for PIN(1) in pcf_xfer\n");)
+			i = -EREMOTEIO;
+			goto out;
+		}
+
+		/* Check LRB (last rcvd bit - slave ack) */
+		if (status & I2C_PCF_LRB) {
+			i2c_stop(adap);
+			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
+			i = -EREMOTEIO;
+			goto out;
+		}
+
+		DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
+			    i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
+
+		if (pmsg->flags & I2C_M_RD) {
+			ret = pcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
+					    (i + 1 == num));
+
+			if (ret != pmsg->len) {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
+					    "only read %d bytes.\n",ret));
+			} else {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
+			}
+		} else {
+			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
+					    (i + 1 == num));
+
+			if (ret != pmsg->len) {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
+					    "only wrote %d bytes.\n",ret));
+			} else {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: wrote %d bytes.\n",ret));
+			}
+		}
+	}
+
+out:
+	if (adap->xfer_end)
+		adap->xfer_end(adap->data);
+	return i;
+}
+
+static u32 pcf_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* exported algorithm data: */
+static const struct i2c_algorithm pcf_algo = {
+	.master_xfer	= pcf_xfer,
+	.functionality	= pcf_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_pcf_add_bus(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pcf_data *pcf_adap = adap->algo_data;
+	int rval;
+
+	DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
+
+	/* register new adapter to i2c module... */
+	adap->algo = &pcf_algo;
+
+	if ((rval = pcf_init_8584(pcf_adap)))
+		return rval;
+
+	rval = i2c_add_adapter(adap);
+
+	return rval;
+}
+EXPORT_SYMBOL(i2c_pcf_add_bus);
+
+MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
+MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(i2c_debug,
+	"debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.h b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.h
new file mode 100644
index 0000000..262ee80
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/algos/i2c-algo-pcf.h
@@ -0,0 +1,72 @@
+/* -------------------------------------------------------------------- */
+/* i2c-pcf8584.h: PCF 8584 global defines				*/
+/* -------------------------------------------------------------------- */
+/*   Copyright (C) 1996 Simon G. Vogl
+                   1999 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.			*/
+/* --------------------------------------------------------------------	*/
+
+/* With some changes from Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef I2C_PCF8584_H
+#define I2C_PCF8584_H 1
+
+/* ----- Control register bits ----------------------------------------	*/
+#define I2C_PCF_PIN	0x80
+#define I2C_PCF_ESO	0x40
+#define I2C_PCF_ES1	0x20
+#define I2C_PCF_ES2	0x10
+#define I2C_PCF_ENI	0x08
+#define I2C_PCF_STA	0x04
+#define I2C_PCF_STO	0x02
+#define I2C_PCF_ACK	0x01
+
+#define I2C_PCF_START    (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
+#define I2C_PCF_STOP     (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
+#define I2C_PCF_REPSTART (              I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
+#define I2C_PCF_IDLE     (I2C_PCF_PIN | I2C_PCF_ESO               | I2C_PCF_ACK)
+
+/* ----- Status register bits -----------------------------------------	*/
+/*#define I2C_PCF_PIN  0x80    as above*/
+
+#define I2C_PCF_INI 0x40   /* 1 if not initialized */
+#define I2C_PCF_STS 0x20
+#define I2C_PCF_BER 0x10
+#define I2C_PCF_AD0 0x08
+#define I2C_PCF_LRB 0x08
+#define I2C_PCF_AAS 0x04
+#define I2C_PCF_LAB 0x02
+#define I2C_PCF_BB  0x01
+
+/* ----- Chip clock frequencies ---------------------------------------	*/
+#define I2C_PCF_CLK3	0x00
+#define I2C_PCF_CLK443	0x10
+#define I2C_PCF_CLK6	0x14
+#define I2C_PCF_CLK	0x18
+#define I2C_PCF_CLK12	0x1c
+
+/* ----- transmission frequencies -------------------------------------	*/
+#define I2C_PCF_TRNS90 0x00	/*  90 kHz */
+#define I2C_PCF_TRNS45 0x01	/*  45 kHz */
+#define I2C_PCF_TRNS11 0x02	/*  11 kHz */
+#define I2C_PCF_TRNS15 0x03	/* 1.5 kHz */
+
+
+/* ----- Access to internal registers according to ES1,ES2 ------------	*/
+/* they are mapped to the data port ( a0 = 0 ) 				*/
+/* available when ESO == 0 :						*/
+
+#define I2C_PCF_OWNADR	0
+#define I2C_PCF_INTREG	I2C_PCF_ES2
+#define I2C_PCF_CLKREG	I2C_PCF_ES1
+
+#endif /* I2C_PCF8584_H */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/Kconfig b/src/kernel/linux/v4.14/drivers/i2c/busses/Kconfig
new file mode 100644
index 0000000..2c03f6f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/Kconfig
@@ -0,0 +1,1339 @@
+#
+# Sensor device configuration
+#
+
+menu "I2C Hardware Bus support"
+	depends on HAS_IOMEM
+
+comment "PC SMBus host controller drivers"
+	depends on PCI
+
+config I2C_ALI1535
+	tristate "ALI 1535"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the SMB
+	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
+	  controller is part of the 7101 device, which is an ACPI-compliant
+	  Power Management Unit (PMU).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali1535.
+
+config I2C_ALI1563
+	tristate "ALI 1563"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the SMB
+	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
+	  controller is part of the 7101 device, which is an ACPI-compliant
+	  Power Management Unit (PMU).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali1563.
+
+config I2C_ALI15X3
+	tristate "ALI 15x3"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali15x3.
+
+config I2C_AMD756
+	tristate "AMD 756/766/768/8111 and nVidia nForce"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the AMD
+	  756/766/768 mainboard I2C interfaces.  The driver also includes
+	  support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
+	  the nVidia nForce I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd756.
+
+config I2C_AMD756_S4882
+	tristate "SMBus multiplexing on the Tyan S4882"
+	depends on I2C_AMD756 && X86
+	help
+	  Enabling this option will add specific SMBus support for the Tyan
+	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
+	  over 8 different channels, where the various memory module EEPROMs
+	  and temperature sensors live.  Saying yes here will give you access
+	  to these in addition to the trunk.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd756-s4882.
+
+config I2C_AMD8111
+	tristate "AMD 8111"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd8111.
+
+config I2C_HIX5HD2
+	tristate "Hix5hd2 high-speed I2C driver"
+	depends on ARCH_HISI || ARCH_HIX5HD2 || COMPILE_TEST
+	help
+	  Say Y here to include support for the high-speed I2C controller
+	  used in HiSilicon hix5hd2 SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-hix5hd2.
+
+config I2C_I801
+	tristate "Intel 82801 (ICH/PCH)"
+	depends on PCI
+	select CHECK_SIGNATURE if X86 && DMI
+	select I2C_SMBUS
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  801 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported:
+	    82801AA
+	    82801AB
+	    82801BA
+	    82801CA/CAM
+	    82801DB
+	    82801EB/ER (ICH5/ICH5R)
+	    6300ESB
+	    ICH6
+	    ICH7
+	    ESB2
+	    ICH8
+	    ICH9
+	    EP80579 (Tolapai)
+	    ICH10
+	    5/3400 Series (PCH)
+	    6 Series (PCH)
+	    Patsburg (PCH)
+	    DH89xxCC (PCH)
+	    Panther Point (PCH)
+	    Lynx Point (PCH)
+	    Lynx Point-LP (PCH)
+	    Avoton (SOC)
+	    Wellsburg (PCH)
+	    Coleto Creek (PCH)
+	    Wildcat Point (PCH)
+	    Wildcat Point-LP (PCH)
+	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
+	    Sunrise Point-LP (PCH)
+	    DNV (SOC)
+	    Broxton (SOC)
+	    Lewisburg (PCH)
+	    Gemini Lake (SOC)
+	    Cannon Lake-H (PCH)
+	    Cannon Lake-LP (PCH)
+	    Cedar Fork (PCH)
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-i801.
+
+config I2C_ISCH
+	tristate "Intel SCH SMBus 1.0"
+	depends on PCI
+	select LPC_SCH
+	help
+	  Say Y here if you want to use SMBus controller on the Intel SCH
+	  based systems.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-isch.
+
+config I2C_ISMT
+	tristate "Intel iSMT SMBus Controller"
+	depends on PCI && X86
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  iSMT SMBus host controller interface.
+
+	  This driver can also be built as a module.  If so, the module will be
+	  called i2c-ismt.
+
+config I2C_PIIX4
+	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported (note that Serverworks is part
+	  of Broadcom):
+	    Intel PIIX4
+	    Intel 440MX
+	    ATI IXP200
+	    ATI IXP300
+	    ATI IXP400
+	    ATI SB600
+	    ATI SB700/SP5100
+	    ATI SB800
+	    AMD Hudson-2
+	    AMD ML
+	    AMD CZ
+	    Serverworks OSB4
+	    Serverworks CSB5
+	    Serverworks CSB6
+	    Serverworks HT-1000
+	    Serverworks HT-1100
+	    SMSC Victory66
+
+	  Some AMD chipsets contain two PIIX4-compatible SMBus
+	  controllers. This driver will attempt to use both controllers
+	  on the SB700/SP5100, if they have been initialized by the BIOS.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-piix4.
+
+config I2C_CHT_WC
+	tristate "Intel Cherry Trail Whiskey Cove PMIC smbus controller"
+	depends on INTEL_SOC_PMIC_CHTWC
+	help
+	  If you say yes to this option, support will be included for the
+	  SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
+	  found on some Intel Cherry Trail systems.
+
+config I2C_NFORCE2
+	tristate "Nvidia nForce2, nForce3 and nForce4"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the Nvidia
+	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-nforce2.
+
+config I2C_NFORCE2_S4985
+	tristate "SMBus multiplexing on the Tyan S4985"
+	depends on I2C_NFORCE2 && X86
+	help
+	  Enabling this option will add specific SMBus support for the Tyan
+	  S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
+	  over 4 different channels, where the various memory module EEPROMs
+	  live.  Saying yes here will give you access to these in addition
+	  to the trunk.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-nforce2-s4985.
+
+config I2C_SIS5595
+	tristate "SiS 5595"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  SiS5595 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis5595.
+
+config I2C_SIS630
+	tristate "SiS 630/730/964"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis630.
+
+config I2C_SIS96X
+	tristate "SiS 96x"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the SiS
+	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
+	  chipsets are supported:
+	    645/961
+	    645DX/961
+	    645DX/962
+	    648/961
+	    650/961
+	    735
+	    745
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis96x.
+
+config I2C_VIA
+	tristate "VIA VT82C586B"
+	depends on PCI
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the VIA
+          82C586B I2C interface
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-via.
+
+config I2C_VIAPRO
+	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the VIA
+	  VT82C596 and later SMBus interface.  Specifically, the following
+	  chipsets are supported:
+	    VT82C596A/B
+	    VT82C686A/B
+	    VT8231
+	    VT8233/A
+	    VT8235
+	    VT8237R/A/S
+	    VT8251
+	    CX700
+	    VX800/VX820
+	    VX855/VX875
+	    VX900
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-viapro.
+
+if ACPI
+
+comment "ACPI drivers"
+
+config I2C_SCMI
+	tristate "SMBus Control Method Interface"
+	help
+	  This driver supports the SMBus Control Method Interface. It needs the
+	  BIOS to declare ACPI control methods as described in the SMBus Control
+	  Method Interface specification.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called i2c-scmi.
+
+endif # ACPI
+
+comment "Mac SMBus host controller drivers"
+	depends on PPC_CHRP || PPC_PMAC
+
+config I2C_HYDRA
+	tristate "CHRP Apple Hydra Mac I/O I2C interface"
+	depends on PCI && PPC_CHRP
+	select I2C_ALGOBIT
+	help
+	  This supports the use of the I2C interface in the Apple Hydra Mac
+	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
+	  have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hydra.
+
+config I2C_POWERMAC
+	tristate "Powermac I2C interface"
+	depends on PPC_PMAC
+	default y
+	help
+	  This exposes the various PowerMac i2c interfaces to the linux i2c
+	  layer and to userland. It is used by various drivers on the PowerMac
+	  platform, and should generally be enabled.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-powermac.
+
+comment "I2C system bus drivers (mostly embedded / system-on-chip)"
+
+config I2C_ALTERA
+	tristate "Altera Soft IP I2C"
+	depends on (ARCH_SOCFPGA || NIOS2) && OF
+	help
+	  If you say yes to this option, support will be included for the
+	  Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-altera.
+
+config I2C_ASPEED
+	tristate "Aspeed I2C Controller"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Aspeed I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-aspeed.
+
+config I2C_AT91
+	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
+	depends on ARCH_AT91
+	help
+	  This supports the use of the I2C interface on Atmel AT91
+	  processors.
+
+	  A serious problem is that there is no documented way to issue
+	  repeated START conditions for more than two messages, as needed
+	  to support combined I2C messages.  Use the i2c-gpio driver
+	  unless your system can cope with this limitation.
+
+	  Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
+	  don't have clock stretching in transmission mode. For that reason,
+	  you can encounter underrun issues causing premature stop sendings if
+	  the latency to fill the transmission register is too long. If you
+	  are facing this situation, use the i2c-gpio driver.
+
+config I2C_AU1550
+	tristate "Au1550/Au1200/Au1300 SMBus interface"
+	depends on MIPS_ALCHEMY
+	help
+	  If you say yes to this option, support will be included for the
+	  Au1550/Au1200/Au1300 SMBus interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-au1550.
+
+config I2C_AXXIA
+	tristate "Axxia I2C controller"
+	depends on ARCH_AXXIA || COMPILE_TEST
+	default ARCH_AXXIA
+	help
+	  Say yes if you want to support the I2C bus on Axxia platforms.
+
+	  Please note that this controller is limited to transfers of maximum
+	  255 bytes in length. Any attempt to to a larger transfer will return
+	  an error.
+
+config I2C_BCM2835
+	tristate "Broadcom BCM2835 I2C controller"
+	depends on ARCH_BCM2835
+	help
+	  If you say yes to this option, support will be included for the
+	  BCM2835 I2C controller.
+
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-bcm2835.
+
+config I2C_BCM_IPROC
+	tristate "Broadcom iProc I2C controller"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
+	help
+	  If you say yes to this option, support will be included for the
+	  Broadcom iProc I2C controller.
+
+	  If you don't know what to do here, say N.
+
+config I2C_BCM_KONA
+	tristate "BCM Kona I2C adapter"
+	depends on ARCH_BCM_MOBILE
+	default y
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Broadcom Kona family of processors.
+
+	  If you do not need KONA I2C interface, say N.
+
+config I2C_BRCMSTB
+	tristate "BRCM Settop/DSL I2C controller"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
+		   COMPILE_TEST
+	default y
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Broadcom Settop/DSL SoCs.
+
+	  If you do not need I2C interface, say N.
+
+config I2C_BLACKFIN_TWI
+	tristate "Blackfin TWI I2C support"
+	depends on BLACKFIN
+	depends on !BF561 && !BF531 && !BF532 && !BF533
+	help
+	  This is the I2C bus driver for Blackfin on-chip TWI interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-bfin-twi.
+
+config I2C_BLACKFIN_TWI_CLK_KHZ
+	int "Blackfin TWI I2C clock (kHz)"
+	depends on I2C_BLACKFIN_TWI
+	range 21 400
+	default 50
+	help
+	  The unit of the TWI clock is kHz.
+
+config I2C_CADENCE
+	tristate "Cadence I2C Controller"
+	depends on ARCH_ZYNQ || ARM64 || XTENSA
+	help
+	  Say yes here to select Cadence I2C Host Controller. This controller is
+	  e.g. used by Xilinx Zynq.
+
+config I2C_CBUS_GPIO
+	tristate "CBUS I2C driver"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Support for CBUS access using I2C API. Mostly relevant for Nokia
+	  Internet Tablets (770, N800 and N810).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-cbus-gpio.
+
+config I2C_CPM
+	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+	depends on CPM1 || CPM2
+	help
+	  This supports the use of the I2C interface on Freescale
+	  processors with CPM1 or CPM2.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-cpm.
+
+config I2C_DAVINCI
+	tristate "DaVinci I2C driver"
+	depends on ARCH_DAVINCI || ARCH_KEYSTONE
+	help
+	  Support for TI DaVinci I2C controller driver.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-davinci.
+
+	  Please note that this driver might be needed to bring up other
+	  devices such as DaVinci NIC.
+	  For details please see http://www.ti.com/davinci
+
+config I2C_DESIGNWARE_CORE
+	tristate
+
+config I2C_DESIGNWARE_PLATFORM
+	tristate "Synopsys DesignWare Platform"
+	select I2C_DESIGNWARE_CORE
+	depends on (ACPI && COMMON_CLK) || !ACPI
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware-platform.
+
+config I2C_DESIGNWARE_SLAVE
+	bool "Synopsys DesignWare Slave"
+	select I2C_SLAVE
+	depends on I2C_DESIGNWARE_PLATFORM
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C slave adapter.
+
+	  This is not a standalone module, this module compiles together with
+	  i2c-designware-core.
+
+config I2C_DESIGNWARE_PCI
+	tristate "Synopsys DesignWare PCI"
+	depends on PCI
+	select I2C_DESIGNWARE_CORE
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware-pci.
+
+config I2C_DESIGNWARE_BAYTRAIL
+	bool "Intel Baytrail I2C semaphore support"
+	depends on ACPI
+	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
+		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
+	help
+	  This driver enables managed host access to the PMIC I2C bus on select
+	  Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
+	  the host to request uninterrupted access to the PMIC's I2C bus from
+	  the platform firmware controlling it. You should say Y if running on
+	  a BayTrail system using the AXP288.
+
+config I2C_DIGICOLOR
+	tristate "Conexant Digicolor I2C driver"
+	depends on ARCH_DIGICOLOR
+	help
+	  Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-digicolor.
+
+config I2C_EFM32
+	tristate "EFM32 I2C controller"
+	depends on ARCH_EFM32 || COMPILE_TEST
+	help
+	  This driver supports the i2c block found in Energy Micro's EFM32
+	  SoCs.
+
+config I2C_EG20T
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
+	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
+	help
+	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
+	  is an IOH(Input/Output Hub) for x86 embedded processor.
+	  This driver can access PCH I2C bus device.
+
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+config I2C_EMEV2
+	tristate "EMMA Mobile series I2C adapter"
+	depends on HAVE_CLK
+	select I2C_SLAVE
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Renesas Electronics EM/EV family of processors.
+
+config I2C_EXYNOS5
+	tristate "Exynos5 high-speed I2C driver"
+	depends on ARCH_EXYNOS && OF
+	default y
+	help
+	  High-speed I2C controller on Exynos5 based Samsung SoCs.
+
+config I2C_GPIO
+	tristate "GPIO-based bitbanging I2C"
+	depends on GPIOLIB || COMPILE_TEST
+	select I2C_ALGOBIT
+	help
+	  This is a very simple bitbanging I2C driver utilizing the
+	  arch-neutral GPIO API to control the SCL and SDA lines.
+
+config I2C_HIGHLANDER
+	tristate "Highlander FPGA SMBus interface"
+	depends on SH_HIGHLANDER
+	help
+	  If you say yes to this option, support will be included for
+	  the SMBus interface located in the FPGA on various Highlander
+	  boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
+	  FPGAs. This is wholly unrelated to the SoC I2C.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-highlander.
+
+config I2C_IBM_IIC
+	tristate "IBM PPC 4xx on-chip I2C interface"
+	depends on 4xx
+	help
+	  Say Y here if you want to use IIC peripheral found on
+	  embedded IBM PPC 4xx based systems.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ibm_iic.
+
+config I2C_IMG
+	tristate "Imagination Technologies I2C SCB Controller"
+	depends on MIPS || METAG || COMPILE_TEST
+	help
+	  Say Y here if you want to use the IMG I2C SCB controller,
+	  available on the TZ1090 and other IMG SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-img-scb.
+
+config I2C_IMX
+	tristate "IMX I2C interface"
+	depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
+	help
+	  Say Y here if you want to use the IIC bus controller on
+	  the Freescale i.MX/MXC, Layerscape or ColdFire processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-imx.
+
+config I2C_IMX_LPI2C
+	tristate "IMX Low Power I2C interface"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+          Say Y here if you want to use the Low Power IIC bus controller
+          on the Freescale i.MX processors.
+
+          This driver can also be built as a module. If so, the module
+          will be called i2c-imx-lpi2c.
+
+config I2C_IOP3XX
+	tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
+	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
+	help
+	  Say Y here if you want to use the IIC bus controller on
+	  the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-iop3xx.
+
+config I2C_JZ4780
+	tristate "JZ4780 I2C controller interface support"
+	depends on MACH_JZ4780 || COMPILE_TEST
+	help
+	 If you say yes to this option, support will be included for the
+	 Ingenic JZ4780 I2C controller.
+
+	 If you don't know what to do here, say N.
+
+config I2C_KEMPLD
+	tristate "Kontron COM I2C Controller"
+	depends on MFD_KEMPLD
+	help
+	  This enables support for the I2C bus interface on some Kontron ETX
+	  and COMexpress (ETXexpress) modules.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-kempld.
+
+config I2C_LPC2K
+	tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	help
+	  This driver supports the I2C interface found several NXP
+	  devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-lpc2k.
+
+config I2C_MESON
+	tristate "Amlogic Meson I2C controller"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Amlogic Meson family of SoCs.
+
+config I2C_MPC
+	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
+	depends on PPC
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+	  MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mpc.
+
+config I2C_MT65XX
+	tristate "MediaTek I2C adapter"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_DMA
+	help
+	  This selects the MediaTek(R) Integrated Inter Circuit bus driver
+	  for MT65xx and MT81xx.
+	  If you want to use MediaTek(R) I2C interface, say Y or M here.
+	  If unsure, say N.
+
+config I2C_MTK
+	tristate "MediaTek I2C Driver"
+	default n
+	---help---
+	  This selects the MediaTek(R) Integrated Inter Circuit bus driver.
+	  MediaTek(R) I2C bus adapter is the base for some other I2C client, eg: touch, sensors.
+	  If you want to use MediaTek(R) I2C interface, say Y or M here.
+	  If unsure, say N.
+
+config I2C_MV64XXX
+	tristate "Marvell mv64xxx I2C Controller"
+	depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Marvell 64xxx line of host bridges.
+	  This driver is also used for Allwinner SoCs I2C controllers.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mv64xxx.
+
+config I2C_MXS
+	tristate "Freescale i.MX28 I2C interface"
+	depends on SOC_IMX28
+	select STMP_DEVICE
+	help
+	  Say Y here if you want to use the I2C bus controller on
+	  the Freescale i.MX28 processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mxs.
+
+config I2C_NOMADIK
+	tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
+	depends on ARM_AMBA
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
+	  as well as the STA2X11 PCIe I/O HUB.
+
+config I2C_OCORES
+	tristate "OpenCores I2C Controller"
+	help
+	  If you say yes to this option, support will be included for the
+	  OpenCores I2C controller. For details see
+	  http://www.opencores.org/projects.cgi/web/i2c/overview
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ocores.
+
+config I2C_OMAP
+	tristate "OMAP I2C adapter"
+	depends on ARCH_OMAP
+	default y if MACH_OMAP_H3 || MACH_OMAP_OSK
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Texas Instruments OMAP1/2 family of processors.
+	  Like OMAP1510/1610/1710/5912 and OMAP242x.
+	  For details see http://www.ti.com/omap.
+
+config I2C_PASEMI
+	tristate "PA Semi SMBus interface"
+	depends on PPC_PASEMI && PCI
+	help
+	  Supports the PA Semi PWRficient on-chip SMBus interfaces.
+
+config I2C_PCA_PLATFORM
+	tristate "PCA9564/PCA9665 as platform device"
+	select I2C_ALGOPCA
+	default n
+	help
+	  This driver supports a memory mapped Philips PCA9564/PCA9665
+	  parallel bus to I2C bus controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-platform.
+
+config I2C_PMCMSP
+	tristate "PMC MSP I2C TWI Controller"
+	depends on PMC_MSP
+	help
+	  This driver supports the PMC TWI controller on MSP devices.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-pmcmsp.
+
+config I2C_PNX
+	tristate "I2C bus support for Philips PNX and NXP LPC targets"
+	depends on ARCH_LPC32XX
+	help
+	  This driver supports the Philips IP3204 I2C IP block master and/or
+	  slave controller
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pnx.
+
+config I2C_PUV3
+	tristate "PKUnity v3 I2C bus support"
+	depends on UNICORE32 && ARCH_PUV3
+	select I2C_ALGOBIT
+	help
+	  This driver supports the I2C IP inside the PKUnity-v3 SoC.
+	  This I2C bus controller is under AMBA/AXI bus.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-puv3.
+
+config I2C_PXA
+	tristate "Intel PXA2XX I2C adapter"
+	depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
+	help
+	  If you have devices in the PXA I2C bus, say yes to this option.
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pxa.
+
+config I2C_PXA_PCI
+	def_bool I2C_PXA && X86_32 && PCI && OF
+
+config I2C_PXA_SLAVE
+	bool "Intel PXA2XX I2C Slave comms support"
+	depends on I2C_PXA && !X86_32
+	help
+	  Support I2C slave mode communications on the PXA I2C bus.  This
+	  is necessary for systems where the PXA may be a target on the
+	  I2C bus.
+
+config I2C_QUP
+	tristate "Qualcomm QUP based I2C controller"
+	depends on ARCH_QCOM
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Qualcomm SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-qup.
+
+config I2C_RIIC
+	tristate "Renesas RIIC adapter"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Renesas RIIC I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-riic.
+
+config I2C_RK3X
+	tristate "Rockchip RK3xxx I2C adapter"
+	depends on OF && COMMON_CLK
+	help
+	  Say Y here to include support for the I2C adapter in Rockchip RK3xxx
+	  SoCs.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called i2c-rk3x.
+
+config HAVE_S3C2410_I2C
+	bool
+	help
+	  This will include I2C support for Samsung SoCs. If you want to
+	  include I2C support for any machine, kindly select this in the
+	  respective Kconfig file.
+
+config I2C_S3C2410
+	tristate "S3C2410 I2C Driver"
+	depends on HAVE_S3C2410_I2C
+	help
+	  Say Y here to include support for I2C controller in the
+	  Samsung SoCs.
+
+config I2C_SH7760
+	tristate "Renesas SH7760 I2C Controller"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  This driver supports the 2 I2C interfaces on the Renesas SH7760.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sh7760.
+
+config I2C_SH_MOBILE
+	tristate "SuperH Mobile I2C Controller"
+	depends on HAS_DMA
+	depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Renesas SH-Mobile processor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sh_mobile.
+
+config I2C_SIMTEC
+	tristate "Simtec Generic I2C interface"
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for
+	  the Simtec Generic I2C interface. This driver is for the
+	  simple I2C bus used on newer Simtec products for general
+	  I2C, such as DDC on the Simtec BBD2016A.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-simtec.
+
+config I2C_SIRF
+	tristate "CSR SiRFprimaII I2C interface"
+	depends on ARCH_SIRF
+	help
+	  If you say yes to this option, support will be included for the
+	  CSR SiRFprimaII I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sirf.
+
+config I2C_SPRD
+	bool "Spreadtrum I2C interface"
+	depends on I2C=y && ARCH_SPRD
+	help
+	  If you say yes to this option, support will be included for the
+	  Spreadtrum I2C interface.
+
+config I2C_ST
+	tristate "STMicroelectronics SSC I2C support"
+	depends on ARCH_STI
+	help
+	  Enable this option to add support for STMicroelectronics SoCs
+	  hardware SSC (Synchronous Serial Controller) as an I2C controller.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-st.
+
+config I2C_STM32F4
+	tristate "STMicroelectronics STM32F4 I2C support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  Enable this option to add support for STM32 I2C controller embedded
+	  in STM32F4 SoCs.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-stm32f4.
+
+config I2C_STM32F7
+	tristate "STMicroelectronics STM32F7 I2C support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  Enable this option to add support for STM32 I2C controller embedded
+	  in STM32F7 SoCs.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-stm32f7.
+
+config I2C_STU300
+	tristate "ST Microelectronics DDC I2C interface"
+	depends on MACH_U300
+	default y if MACH_U300
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface from ST Microelectronics simply called "DDC I2C"
+	  supporting both I2C and DDC, used in e.g. the U300 series
+	  mobile platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-stu300.
+
+config I2C_SUN6I_P2WI
+	tristate "Allwinner sun6i internal P2WI controller"
+	depends on RESET_CONTROLLER
+	depends on MACH_SUN6I || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+	  SOCs.
+	  The P2WI looks like an SMBus controller (which supports only byte
+	  accesses), except that it only supports one slave device.
+	  This interface is used to connect to specific PMIC devices (like the
+	  AXP221).
+
+config I2C_TEGRA
+	tristate "NVIDIA Tegra internal I2C controller"
+	depends on ARCH_TEGRA
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C controller embedded in NVIDIA Tegra SOCs
+
+config I2C_TEGRA_BPMP
+	tristate "NVIDIA Tegra BPMP I2C controller"
+	depends on TEGRA_BPMP
+	default y
+	help
+	  If you say yes to this option, support will be included for the I2C
+	  controller embedded in NVIDIA Tegra SoCs accessed via the BPMP.
+
+	  This I2C driver is a 'virtual' I2C driver. The real driver is part
+	  of the BPMP firmware, and this driver merely communicates with that
+	  real driver.
+
+config I2C_UNIPHIER
+	tristate "UniPhier FIFO-less I2C controller"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for
+	  the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
+	  or older UniPhier SoCs.
+
+config I2C_UNIPHIER_F
+	tristate "UniPhier FIFO-builtin I2C controller"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for
+	  the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
+	  PH1-Pro5, or newer UniPhier SoCs.
+
+config I2C_VERSATILE
+	tristate "ARM Versatile/Realview I2C bus support"
+	depends on ARCH_MPS2 || ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
+	select I2C_ALGOBIT
+	help
+	  Say yes if you want to support the I2C serial bus on ARMs Versatile
+	  range of platforms.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-versatile.
+
+config I2C_WMT
+	tristate "Wondermedia WM8xxx SoC I2C bus support"
+	depends on ARCH_VT8500
+	help
+	  Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
+	  SoCs.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-wmt.
+
+config I2C_OCTEON
+	tristate "Cavium OCTEON I2C bus support"
+	depends on CAVIUM_OCTEON_SOC
+	help
+	  Say yes if you want to support the I2C serial bus on Cavium
+	  OCTEON SOC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-octeon.
+
+config I2C_THUNDERX
+	tristate "Cavium ThunderX I2C bus support"
+	depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
+	select I2C_SMBUS
+	help
+	  Say yes if you want to support the I2C serial bus on Cavium
+	  ThunderX SOC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-thunderx.
+
+config I2C_XILINX
+	tristate "Xilinx I2C Controller"
+	depends on HAS_IOMEM
+	help
+	  If you say yes to this option, support will be included for the
+	  Xilinx I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called xilinx_i2c.
+
+config I2C_XLR
+	tristate "Netlogic XLR and Sigma Designs I2C support"
+	depends on CPU_XLR || ARCH_TANGO
+	help
+	  This driver enables support for the on-chip I2C interface of
+	  the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-xlr.
+
+config I2C_XLP9XX
+	tristate "XLP9XX I2C support"
+	depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST
+	help
+	  This driver enables support for the on-chip I2C interface of
+	  the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors.
+
+	  This driver can also be built as a module.  If so, the module will
+	  be called i2c-xlp9xx.
+
+config I2C_RCAR
+	tristate "Renesas R-Car I2C Controller"
+	depends on HAS_DMA
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select I2C_SLAVE
+	help
+	  If you say yes to this option, support will be included for the
+	  R-Car I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-rcar.
+
+comment "External I2C/SMBus adapter drivers"
+
+config I2C_DIOLAN_U2C
+	tristate "Diolan U2C-12 USB adapter"
+	depends on USB
+	help
+	  If you say yes to this option, support will be included for Diolan
+	  U2C-12, a USB to I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-diolan-u2c.
+
+config I2C_DLN2
+       tristate "Diolan DLN-2 USB I2C adapter"
+       depends on MFD_DLN2
+       help
+	 If you say yes to this option, support will be included for Diolan
+	 DLN2, a USB to I2C interface.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called i2c-dln2.
+
+config I2C_PARPORT
+	tristate "Parallel port adapter"
+	depends on PARPORT
+	select I2C_ALGOBIT
+	select I2C_SMBUS
+	help
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
+
+	  This driver is a replacement for (and was inspired by) an older
+	  driver named i2c-philips-par.  The new driver supports more devices,
+	  and makes it easier to add support for new devices.
+
+	  An adapter type parameter is now mandatory.  Please read the file
+	  Documentation/i2c/busses/i2c-parport for details.
+
+	  Another driver exists, named i2c-parport-light, which doesn't depend
+	  on the parport driver.  This is meant for embedded systems. Don't say
+	  Y here if you intend to say Y or M there.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-parport.
+
+config I2C_PARPORT_LIGHT
+	tristate "Parallel port adapter (light)"
+	select I2C_ALGOBIT
+	select I2C_SMBUS
+	help
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
+
+	  This driver is a light version of i2c-parport.  It doesn't depend
+	  on the parport driver, and uses direct I/O access instead.  This
+	  might be preferred on embedded systems where wasting memory for
+	  the clean but heavy parport handling is not an option.  The
+	  drawback is a reduced portability and the impossibility to
+	  daisy-chain other parallel port devices.
+
+	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
+	  both is possible but both modules should not be loaded at the same
+	  time.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-parport-light.
+
+config I2C_ROBOTFUZZ_OSIF
+	tristate "RobotFuzz Open Source InterFace USB adapter"
+	depends on USB
+	help
+	  If you say yes to this option, support will be included for the
+	  RobotFuzz Open Source InterFace USB to I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-osif.
+
+config I2C_TAOS_EVM
+	tristate "TAOS evaluation module"
+	depends on TTY
+	select SERIO
+	select SERIO_SERPORT
+	default n
+	help
+	  This supports TAOS evaluation modules on serial port. In order to
+	  use this driver, you will need the inputattach tool, which is part
+	  of the input-utils package.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-taos-evm.
+
+config I2C_TINY_USB
+	tristate "Tiny-USB adapter"
+	depends on USB
+	help
+	  If you say yes to this option, support will be included for the
+	  i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
+	  http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-tiny-usb.
+
+config I2C_VIPERBOARD
+	tristate "Viperboard I2C master support"
+	depends on MFD_VIPERBOARD && USB
+	help
+	  Say yes here to access the I2C part of the Nano River
+	  Technologies Viperboard as I2C master.
+          See viperboard API specification and Nano
+          River Tech's viperboard.h for detailed meaning
+          of the module parameters.
+
+comment "Other I2C/SMBus bus drivers"
+
+config I2C_ACORN
+	tristate "Acorn IOC/IOMD I2C bus support"
+	depends on ARCH_ACORN
+	default y
+	select I2C_ALGOBIT
+	help
+	  Say yes if you want to support the I2C bus on Acorn platforms.
+
+	  If you don't know, say Y.
+
+config I2C_ELEKTOR
+	tristate "Elektor ISA card"
+	depends on ISA && HAS_IOPORT_MAP && BROKEN_ON_SMP
+	select I2C_ALGOPCF
+	help
+	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+	  such an adapter.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-elektor.
+
+config I2C_MLXCPLD
+	tristate "Mellanox I2C driver"
+	depends on X86_64
+	help
+	  This exposes the Mellanox platform I2C busses to the linux I2C layer
+	  for X86 based systems.
+	  Controller is implemented as CPLD logic.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called as i2c-mlxcpld.
+
+config I2C_PCA_ISA
+	tristate "PCA9564/PCA9665 on an ISA bus"
+	depends on ISA
+	select I2C_ALGOPCA
+	default n
+	help
+	  This driver supports ISA boards using the Philips PCA9564/PCA9665
+	  parallel bus to I2C bus controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-isa.
+
+	  This device is almost undetectable and using this driver on a
+	  system which doesn't have this device will result in long
+	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
+	  time).  If unsure, say N.
+
+config I2C_SIBYTE
+	tristate "SiByte SMBus interface"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config I2C_CROS_EC_TUNNEL
+	tristate "ChromeOS EC tunnel I2C bus"
+	depends on MFD_CROS_EC
+	help
+	  If you say yes here you get an I2C bus that will tunnel i2c commands
+	  through to the other side of the ChromeOS EC to the i2c bus
+	  connected there. This will work whatever the interface used to
+	  talk to the EC (SPI, I2C or LPC).
+
+config I2C_XGENE_SLIMPRO
+	tristate "APM X-Gene SoC I2C SLIMpro devices support"
+	depends on ARCH_XGENE && MAILBOX
+	help
+	  Enable I2C bus access using the APM X-Gene SoC SLIMpro
+	  co-processor. The I2C device access the I2C bus via the X-Gene
+	  to SLIMpro (On chip coprocessor) mailbox mechanism.
+	  If unsure, say N.
+
+config SCx200_ACB
+	tristate "Geode ACCESS.bus support"
+	depends on X86_32 && PCI
+	help
+	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called scx200_acb.
+
+config I2C_OPAL
+	tristate "IBM OPAL I2C driver"
+	depends on PPC_POWERNV
+	default y
+	help
+	  This exposes the PowerNV platform i2c busses to the linux i2c layer,
+	  the driver is based on the OPAL interfaces.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called as i2c-opal.
+
+config I2C_ZX2967
+	tristate "ZTE ZX2967 I2C support"
+	depends on ARCH_ZX
+	default y
+	help
+	  Selecting this option will add ZX2967 I2C driver.
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-zx2967.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/Makefile b/src/kernel/linux/v4.14/drivers/i2c/busses/Makefile
new file mode 100644
index 0000000..62e8d14
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/Makefile
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the i2c bus drivers.
+#
+
+# ACPI drivers
+obj-$(CONFIG_I2C_SCMI)		+= i2c-scmi.o
+
+# PC SMBus host controller drivers
+obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
+obj-$(CONFIG_I2C_ALI1563)	+= i2c-ali1563.o
+obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
+obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
+obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
+obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
+obj-$(CONFIG_I2C_CHT_WC)	+= i2c-cht-wc.o
+obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_ISCH)		+= i2c-isch.o
+obj-$(CONFIG_I2C_ISMT)		+= i2c-ismt.o
+obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_NFORCE2_S4985)	+= i2c-nforce2-s4985.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
+obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
+obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
+obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+
+# Mac SMBus host controller drivers
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
+
+# Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_ALTERA)	+= i2c-altera.o
+obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
+obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
+obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
+obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
+obj-$(CONFIG_I2C_BCM_IPROC)	+= i2c-bcm-iproc.o
+obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CADENCE)	+= i2c-cadence.o
+obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
+obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
+obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
+i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
+ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y)
+i2c-designware-core-objs += i2c-designware-slave.o
+endif
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
+i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
+obj-$(CONFIG_I2C_DIGICOLOR)	+= i2c-digicolor.o
+obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
+obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
+obj-$(CONFIG_I2C_EMEV2)		+= i2c-emev2.o
+obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
+obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
+obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
+obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
+obj-$(CONFIG_I2C_IMG)		+= i2c-img-scb.o
+obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
+obj-$(CONFIG_I2C_IMX_LPI2C)	+= i2c-imx-lpi2c.o
+obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
+obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
+obj-$(CONFIG_I2C_LPC2K)		+= i2c-lpc2k.o
+obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
+obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
+obj-$(CONFIG_I2C_MT65XX)	+= i2c-mt65xx.o
+obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
+obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
+obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
+obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
+obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
+obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
+obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
+obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
+obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
+obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
+obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
+obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
+obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
+obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
+obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
+obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
+obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
+obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
+obj-$(CONFIG_I2C_SPRD)		+= i2c-sprd.o
+obj-$(CONFIG_I2C_ST)		+= i2c-st.o
+obj-$(CONFIG_I2C_STM32F4)	+= i2c-stm32f4.o
+obj-$(CONFIG_I2C_STM32F7)	+= i2c-stm32f7.o
+obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
+obj-$(CONFIG_I2C_SUN6I_P2WI)	+= i2c-sun6i-p2wi.o
+obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
+obj-$(CONFIG_I2C_TEGRA_BPMP)	+= i2c-tegra-bpmp.o
+obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o
+obj-$(CONFIG_I2C_UNIPHIER_F)	+= i2c-uniphier-f.o
+obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
+i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
+obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
+i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o
+obj-$(CONFIG_I2C_THUNDERX)	+= i2c-thunderx.o
+obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
+obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
+obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
+obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
+obj-$(CONFIG_I2C_ZX2967)	+= i2c-zx2967.o
+obj-$(CONFIG_I2C_MTK)		+= i2c-mtk.o
+obj-$(CONFIG_I2C_MTK)           += i2c-mtk_debug.o
+# External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
+obj-$(CONFIG_I2C_DLN2)		+= i2c-dln2.o
+obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
+obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
+obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF)	+= i2c-robotfuzz-osif.o
+obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
+obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
+obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-viperboard.o
+
+# Other I2C/SMBus bus drivers
+obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
+obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
+obj-$(CONFIG_I2C_BRCMSTB)	+= i2c-brcmstb.o
+obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
+obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+obj-$(CONFIG_I2C_MLXCPLD)	+= i2c-mlxcpld.o
+obj-$(CONFIG_I2C_OPAL)		+= i2c-opal.o
+obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
+obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
+obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+
+ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
+ccflags-y += -I$(srctree)/drivers/misc/mediatek/include/mt-plat
+ccflags-y += -I$(srctree)/drivers/misc/mediatek/scp/$(CONFIG_MTK_PLATFORM)/
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-acorn.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-acorn.c
new file mode 100644
index 0000000..6618db7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-acorn.c
@@ -0,0 +1,97 @@
+/*
+ *  linux/drivers/acorn/char/i2c.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  ARM IOC/IOMD i2c driver.
+ *
+ *  On Acorn machines, the following i2c devices are on the bus:
+ *	- PCF8583 real time clock & static RAM
+ */
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/ioc.h>
+
+#define FORCE_ONES	0xdc
+#define SCL		0x02
+#define SDA		0x01
+
+/*
+ * We must preserve all non-i2c output bits in IOC_CONTROL.
+ * Note also that we need to preserve the value of SCL and
+ * SDA outputs as well (which may be different from the
+ * values read back from IOC_CONTROL).
+ */
+static u_int force_ones;
+
+static void ioc_setscl(void *data, int state)
+{
+	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+	u_int ones = force_ones;
+
+	if (state)
+		ones |= SCL;
+	else
+		ones &= ~SCL;
+
+	force_ones = ones;
+
+ 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static void ioc_setsda(void *data, int state)
+{
+	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+	u_int ones = force_ones;
+
+	if (state)
+		ones |= SDA;
+	else
+		ones &= ~SDA;
+
+	force_ones = ones;
+
+ 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static int ioc_getscl(void *data)
+{
+	return (ioc_readb(IOC_CONTROL) & SCL) != 0;
+}
+
+static int ioc_getsda(void *data)
+{
+	return (ioc_readb(IOC_CONTROL) & SDA) != 0;
+}
+
+static struct i2c_algo_bit_data ioc_data = {
+	.setsda		= ioc_setsda,
+	.setscl		= ioc_setscl,
+	.getsda		= ioc_getsda,
+	.getscl		= ioc_getscl,
+	.udelay		= 80,
+	.timeout	= HZ,
+};
+
+static struct i2c_adapter ioc_ops = {
+	.nr			= 0,
+	.name			= "ioc",
+	.algo_data		= &ioc_data,
+};
+
+static int __init i2c_ioc_init(void)
+{
+	force_ones = FORCE_ONES | SCL | SDA;
+
+	return i2c_bit_add_numbered_bus(&ioc_ops);
+}
+
+module_init(i2c_ioc_init);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1535.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1535.c
new file mode 100644
index 0000000..4f2d788
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1535.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>,
+ *                      Philip Edelbrock <phil@netroedge.com>,
+ *                      Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ *                      Dan Eaton <dan.eaton@rocketlogix.com> and
+ *                      Stephen Rousset <stephen.rousset@rocketlogix.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+*/
+
+/*
+    This is the driver for the SMB Host controller on
+    Acer Labs Inc. (ALI) M1535 South Bridge.
+
+    The M1535 is a South bridge for portable systems.
+    It is very similar to the M15x3 South bridges also produced
+    by Acer Labs Inc.  Some of the registers within the part
+    have moved and some have been redefined slightly. Additionally,
+    the sequencing of the SMBus transactions has been modified
+    to be more consistent with the sequencing recommended by
+    the manufacturer and observed through testing.  These
+    changes are reflected in this driver and can be identified
+    by comparing this driver to the i2c-ali15x3 driver.
+    For an overview of these chips see http://www.acerlabs.com
+
+    The SMB controller is part of the 7101 device, which is an
+    ACPI-compliant Power Management Unit (PMU).
+
+    The whole 7101 device has to be enabled for the SMB to work.
+    You can't just enable the SMB alone.
+    The SMB and the ACPI have separate I/O spaces.
+    We make sure that the SMB is enabled. We leave the ACPI alone.
+
+    This driver controls the SMB Host only.
+
+    This driver does not use interrupts.
+*/
+
+
+/* Note: we assume there can only be one ALI1535, with one SMBus interface */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+
+/* ALI1535 SMBus address offsets */
+#define SMBHSTSTS	(0 + ali1535_smba)
+#define SMBHSTTYP	(1 + ali1535_smba)
+#define SMBHSTPORT	(2 + ali1535_smba)
+#define SMBHSTCMD	(7 + ali1535_smba)
+#define SMBHSTADD	(3 + ali1535_smba)
+#define SMBHSTDAT0	(4 + ali1535_smba)
+#define SMBHSTDAT1	(5 + ali1535_smba)
+#define SMBBLKDAT	(6 + ali1535_smba)
+
+/* PCI Address Constants */
+#define SMBCOM		0x004
+#define SMBREV		0x008
+#define SMBCFG		0x0D1
+#define SMBBA		0x0E2
+#define SMBHSTCFG	0x0F0
+#define SMBCLK		0x0F2
+
+/* Other settings */
+#define MAX_TIMEOUT		500	/* times 1/100 sec */
+#define ALI1535_SMB_IOSIZE	32
+
+#define ALI1535_SMB_DEFAULTBASE	0x8040
+
+/* ALI1535 address lock bits */
+#define ALI1535_LOCK		0x06	/* dwe */
+
+/* ALI1535 command constants */
+#define ALI1535_QUICK		0x00
+#define ALI1535_BYTE		0x10
+#define ALI1535_BYTE_DATA	0x20
+#define ALI1535_WORD_DATA	0x30
+#define ALI1535_BLOCK_DATA	0x40
+#define ALI1535_I2C_READ	0x60
+
+#define	ALI1535_DEV10B_EN	0x80	/* Enable 10-bit addressing in	*/
+					/*  I2C read			*/
+#define	ALI1535_T_OUT		0x08	/* Time-out Command (write)	*/
+#define	ALI1535_A_HIGH_BIT9	0x08	/* Bit 9 of 10-bit address in	*/
+					/* Alert-Response-Address	*/
+					/* (read)			*/
+#define	ALI1535_KILL		0x04	/* Kill Command (write)		*/
+#define	ALI1535_A_HIGH_BIT8	0x04	/* Bit 8 of 10-bit address in	*/
+					/*  Alert-Response-Address	*/
+					/*  (read)			*/
+
+#define	ALI1535_D_HI_MASK	0x03	/* Mask for isolating bits 9-8	*/
+					/*  of 10-bit address in I2C	*/
+					/*  Read Command		*/
+
+/* ALI1535 status register bits */
+#define ALI1535_STS_IDLE	0x04
+#define ALI1535_STS_BUSY	0x08	/* host busy */
+#define ALI1535_STS_DONE	0x10	/* transaction complete */
+#define ALI1535_STS_DEV		0x20	/* device error */
+#define ALI1535_STS_BUSERR	0x40	/* bus error    */
+#define ALI1535_STS_FAIL	0x80	/* failed bus transaction */
+#define ALI1535_STS_ERR		0xE0	/* all the bad error bits */
+
+#define ALI1535_BLOCK_CLR	0x04	/* reset block data index */
+
+/* ALI1535 device address register bits */
+#define	ALI1535_RD_ADDR		0x01	/* Read/Write Bit in Device	*/
+					/*  Address field		*/
+					/*  -> Write = 0		*/
+					/*  -> Read  = 1		*/
+#define	ALI1535_SMBIO_EN	0x04	/* SMB I/O Space enable		*/
+
+static struct pci_driver ali1535_driver;
+static unsigned long ali1535_smba;
+static unsigned short ali1535_offset;
+
+/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
+   Note the differences between kernels with the old PCI BIOS interface and
+   newer kernels with the real PCI interface. In compat.h some things are
+   defined to make the transition easier. */
+static int ali1535_setup(struct pci_dev *dev)
+{
+	int retval;
+	unsigned char temp;
+
+	/* Check the following things:
+		- SMB I/O address is initialized
+		- Device is enabled
+		- We can use the addresses
+	*/
+
+	retval = pci_enable_device(dev);
+	if (retval) {
+		dev_err(&dev->dev, "ALI1535_smb can't enable device\n");
+		goto exit;
+	}
+
+	/* Determine the address of the SMBus area */
+	pci_read_config_word(dev, SMBBA, &ali1535_offset);
+	dev_dbg(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
+	ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
+	if (ali1535_offset == 0) {
+		dev_warn(&dev->dev,
+			"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (pci_resource_flags(dev, 0) & IORESOURCE_IO)
+		ali1535_smba = pci_resource_start(dev, 0) + ali1535_offset;
+	else
+		ali1535_smba = ali1535_offset;
+
+	retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+				   ali1535_driver.name);
+	if (retval)
+		goto exit;
+
+	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+			    ali1535_driver.name)) {
+		dev_err(&dev->dev, "ALI1535_smb region 0x%lx already in use!\n",
+			ali1535_smba);
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	/* check if whole device is enabled */
+	pci_read_config_byte(dev, SMBCFG, &temp);
+	if ((temp & ALI1535_SMBIO_EN) == 0) {
+		dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+		retval = -ENODEV;
+		goto exit_free;
+	}
+
+	/* Is SMB Host controller enabled? */
+	pci_read_config_byte(dev, SMBHSTCFG, &temp);
+	if ((temp & 1) == 0) {
+		dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+		retval = -ENODEV;
+		goto exit_free;
+	}
+
+	/* set SMB clock to 74KHz as recommended in data sheet */
+	pci_write_config_byte(dev, SMBCLK, 0x20);
+
+	/*
+	  The interrupt routing for SMB is set up in register 0x77 in the
+	  1533 ISA Bridge device, NOT in the 7101 device.
+	  Don't bother with finding the 1533 device and reading the register.
+	if ((....... & 0x0F) == 1)
+		dev_dbg(&dev->dev, "ALI1535 using Interrupt 9 for SMBus.\n");
+	*/
+	pci_read_config_byte(dev, SMBREV, &temp);
+	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&dev->dev, "ALI1535_smba = 0x%lx\n", ali1535_smba);
+
+	return 0;
+
+exit_free:
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+exit:
+	return retval;
+}
+
+static int ali1535_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, TYP=%02x, "
+		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
+		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* get status */
+	temp = inb_p(SMBHSTSTS);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	/* Check the busy bit first */
+	if (temp & ALI1535_STS_BUSY) {
+		/* If the host controller is still busy, it may have timed out
+		 * in the previous transaction, resulting in a "SMBus Timeout"
+		 * printk.  I've tried the following to reset a stuck busy bit.
+		 *   1. Reset the controller with an KILL command. (this
+		 *      doesn't seem to clear the controller if an external
+		 *      device is hung)
+		 *   2. Reset the controller and the other SMBus devices with a
+		 *      T_OUT command. (this clears the host busy bit if an
+		 *      external device is hung, but it comes back upon a new
+		 *      access to a device)
+		 *   3. Disable and reenable the controller in SMBHSTCFG. Worst
+		 *      case, nothing seems to work except power reset.
+		 */
+
+		/* Try resetting entire SMB bus, including other devices - This
+		 * may not work either - it clears the BUSY bit but then the
+		 * BUSY bit may come back on when you try and use the chip
+		 * again.  If that's the case you are stuck.
+		 */
+		dev_info(&adap->dev,
+			"Resetting entire SMB Bus to clear busy condition (%02x)\n",
+			temp);
+		outb_p(ALI1535_T_OUT, SMBHSTTYP);
+		temp = inb_p(SMBHSTSTS);
+	}
+
+	/* now check the error bits and the busy bit */
+	if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
+		/* do a clear-on-write */
+		outb_p(0xFF, SMBHSTSTS);
+		temp = inb_p(SMBHSTSTS);
+		if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
+			/* This is probably going to be correctable only by a
+			 * power reset as one of the bits now appears to be
+			 * stuck */
+			/* This may be a bus or device with electrical problems. */
+			dev_err(&adap->dev,
+				"SMBus reset failed! (0x%02x) - controller or "
+				"device on bus is probably hung\n", temp);
+			return -EBUSY;
+		}
+	} else {
+		/* check and clear done bit */
+		if (temp & ALI1535_STS_DONE)
+			outb_p(temp, SMBHSTSTS);
+	}
+
+	/* start the transaction by writing anything to the start register */
+	outb_p(0xFF, SMBHSTPORT);
+
+	/* We will always wait for a fraction of a second! */
+	timeout = 0;
+	do {
+		usleep_range(1000, 2000);
+		temp = inb_p(SMBHSTSTS);
+	} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
+		 && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		result = -ETIMEDOUT;
+		dev_err(&adap->dev, "SMBus Timeout!\n");
+	}
+
+	if (temp & ALI1535_STS_FAIL) {
+		result = -EIO;
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+	}
+
+	/* Unfortunately the ALI SMB controller maps "no response" and "bus
+	 * collision" into a single bit. No response is the usual case so don't
+	 * do a printk.  This means that bus collisions go unreported.
+	 */
+	if (temp & ALI1535_STS_BUSERR) {
+		result = -ENXIO;
+		dev_dbg(&adap->dev,
+			"Error: no response or bus collision ADD=%02x\n",
+			inb_p(SMBHSTADD));
+	}
+
+	/* haven't ever seen this */
+	if (temp & ALI1535_STS_DEV) {
+		result = -EIO;
+		dev_err(&adap->dev, "Error: device error\n");
+	}
+
+	/* check to see if the "command complete" indication is set */
+	if (!(temp & ALI1535_STS_DONE)) {
+		result = -ETIMEDOUT;
+		dev_err(&adap->dev, "Error: command never completed\n");
+	}
+
+	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, "
+		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
+		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* take consequent actions for error conditions */
+	if (!(temp & ALI1535_STS_DONE)) {
+		/* issue "kill" to reset host controller */
+		outb_p(ALI1535_KILL, SMBHSTTYP);
+		outb_p(0xFF, SMBHSTSTS);
+	} else if (temp & ALI1535_STS_ERR) {
+		/* issue "timeout" to reset all devices on bus */
+		outb_p(ALI1535_T_OUT, SMBHSTTYP);
+		outb_p(0xFF, SMBHSTSTS);
+	}
+
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data)
+{
+	int i, len;
+	int temp;
+	int timeout;
+	s32 result = 0;
+
+	/* make sure SMBus is idle */
+	temp = inb_p(SMBHSTSTS);
+	for (timeout = 0;
+	     (timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
+	     timeout++) {
+		usleep_range(1000, 2000);
+		temp = inb_p(SMBHSTSTS);
+	}
+	if (timeout >= MAX_TIMEOUT)
+		dev_warn(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);
+
+	/* clear status register (clear-on-write) */
+	outb_p(0xFF, SMBHSTSTS);
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_QUICK;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BYTE;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BYTE_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_WORD_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BLOCK_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0) {
+				len = 0;
+				data->block[0] = len;
+			}
+			if (len > 32) {
+				len = 32;
+				data->block[0] = len;
+			}
+			outb_p(len, SMBHSTDAT0);
+			/* Reset SMBBLKDAT */
+			outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		result = -EOPNOTSUPP;
+		goto EXIT;
+	}
+
+	result = ali1535_transaction(adap);
+	if (result)
+		goto EXIT;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
+		result = 0;
+		goto EXIT;
+	}
+
+	switch (size) {
+	case ALI1535_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI1535_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI1535_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case ALI1535_BLOCK_DATA:
+		len = inb_p(SMBHSTDAT0);
+		if (len > 32)
+			len = 32;
+		data->block[0] = len;
+		/* Reset SMBBLKDAT */
+		outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
+		for (i = 1; i <= data->block[0]; i++) {
+			data->block[i] = inb_p(SMBBLKDAT);
+			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
+				len, i, data->block[i]);
+		}
+		break;
+	}
+EXIT:
+	return result;
+}
+
+
+static u32 ali1535_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= ali1535_access,
+	.functionality	= ali1535_func,
+};
+
+static struct i2c_adapter ali1535_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static const struct pci_device_id ali1535_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, ali1535_ids);
+
+static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (ali1535_setup(dev)) {
+		dev_warn(&dev->dev,
+			"ALI1535 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	ali1535_adapter.dev.parent = &dev->dev;
+
+	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
+		"SMBus ALI1535 adapter at %04x", ali1535_offset);
+	return i2c_add_adapter(&ali1535_adapter);
+}
+
+static void ali1535_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&ali1535_adapter);
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+}
+
+static struct pci_driver ali1535_driver = {
+	.name		= "ali1535_smbus",
+	.id_table	= ali1535_ids,
+	.probe		= ali1535_probe,
+	.remove		= ali1535_remove,
+};
+
+module_pci_driver(ali1535_driver);
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "Mark D. Studebaker <mdsxyz123@yahoo.com> "
+	      "and Dan Eaton <dan.eaton@rocketlogix.com>");
+MODULE_DESCRIPTION("ALI1535 SMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1563.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1563.c
new file mode 100644
index 0000000..15517d7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali1563.c
@@ -0,0 +1,443 @@
+/**
+ *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
+ *
+ *	Copyright (C) 2004 Patrick Mochel
+ *		      2005 Rudolf Marek <r.marek@assembler.cz>
+ *
+ *	The 1563 southbridge is deceptively similar to the 1533, with a
+ *	few notable exceptions. One of those happens to be the fact they
+ *	upgraded the i2c core to be 2.0 compliant, and happens to be almost
+ *	identical to the i2c controller found in the Intel 801 south
+ *	bridges.
+ *
+ *	This driver is based on a mix of the 15x3, 1535, and i801 drivers,
+ *	with a little help from the ALi 1563 spec.
+ *
+ *	This file is released under the GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/acpi.h>
+
+#define ALI1563_MAX_TIMEOUT	500
+#define	ALI1563_SMBBA		0x80
+#define ALI1563_SMB_IOEN	1
+#define ALI1563_SMB_HOSTEN	2
+#define ALI1563_SMB_IOSIZE	16
+
+#define SMB_HST_STS	(ali1563_smba + 0)
+#define SMB_HST_CNTL1	(ali1563_smba + 1)
+#define SMB_HST_CNTL2	(ali1563_smba + 2)
+#define SMB_HST_CMD	(ali1563_smba + 3)
+#define SMB_HST_ADD	(ali1563_smba + 4)
+#define SMB_HST_DAT0	(ali1563_smba + 5)
+#define SMB_HST_DAT1	(ali1563_smba + 6)
+#define SMB_BLK_DAT	(ali1563_smba + 7)
+
+#define HST_STS_BUSY	0x01
+#define HST_STS_INTR	0x02
+#define HST_STS_DEVERR	0x04
+#define HST_STS_BUSERR	0x08
+#define HST_STS_FAIL	0x10
+#define HST_STS_DONE	0x80
+#define HST_STS_BAD	0x1c
+
+
+#define HST_CNTL1_TIMEOUT	0x80
+#define HST_CNTL1_LAST		0x40
+
+#define HST_CNTL2_KILL		0x04
+#define HST_CNTL2_START		0x40
+#define HST_CNTL2_QUICK		0x00
+#define HST_CNTL2_BYTE		0x01
+#define HST_CNTL2_BYTE_DATA	0x02
+#define HST_CNTL2_WORD_DATA	0x03
+#define HST_CNTL2_BLOCK		0x05
+
+
+#define HST_CNTL2_SIZEMASK	0x38
+
+static struct pci_driver ali1563_pci_driver;
+static unsigned short ali1563_smba;
+
+static int ali1563_transaction(struct i2c_adapter *a, int size)
+{
+	u32 data;
+	int timeout;
+	int status = -EIO;
+
+	dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	data = inb_p(SMB_HST_STS);
+	if (data & HST_STS_BAD) {
+		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
+		outb_p(data | HST_STS_BAD, SMB_HST_STS);
+		data = inb_p(SMB_HST_STS);
+		if (data & HST_STS_BAD)
+			return -EBUSY;
+	}
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+	timeout = ALI1563_MAX_TIMEOUT;
+	do {
+		msleep(1);
+	} while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+
+	dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	if (timeout && !(data & HST_STS_BAD))
+		return 0;
+
+	if (!timeout) {
+		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
+		/* Issue 'kill' to host controller */
+		outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
+		data = inb_p(SMB_HST_STS);
+		status = -ETIMEDOUT;
+	}
+
+	/* device error - no response, ignore the autodetection case */
+	if (data & HST_STS_DEVERR) {
+		if (size != HST_CNTL2_QUICK)
+			dev_err(&a->dev, "Device error!\n");
+		status = -ENXIO;
+	}
+	/* bus collision */
+	if (data & HST_STS_BUSERR) {
+		dev_err(&a->dev, "Bus collision!\n");
+		/* Issue timeout, hoping it helps */
+		outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
+	}
+
+	if (data & HST_STS_FAIL) {
+		dev_err(&a->dev, "Cleaning fail after KILL!\n");
+		outb_p(0x0, SMB_HST_CNTL2);
+	}
+
+	return status;
+}
+
+static int ali1563_block_start(struct i2c_adapter *a)
+{
+	u32 data;
+	int timeout;
+	int status = -EIO;
+
+	dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	data = inb_p(SMB_HST_STS);
+	if (data & HST_STS_BAD) {
+		dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
+		outb_p(data | HST_STS_BAD, SMB_HST_STS);
+		data = inb_p(SMB_HST_STS);
+		if (data & HST_STS_BAD)
+			return -EBUSY;
+	}
+
+	/* Clear byte-ready bit */
+	outb_p(data | HST_STS_DONE, SMB_HST_STS);
+
+	/* Start transaction and wait for byte-ready bit to be set */
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+	timeout = ALI1563_MAX_TIMEOUT;
+	do {
+		msleep(1);
+	} while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+
+	dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	if (timeout && !(data & HST_STS_BAD))
+		return 0;
+
+	if (timeout == 0)
+		status = -ETIMEDOUT;
+
+	if (data & HST_STS_DEVERR)
+		status = -ENXIO;
+
+	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+		timeout ? "" : "Timeout ",
+		data & HST_STS_FAIL ? "Transaction Failed " : "",
+		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+		data & HST_STS_DEVERR ? "Device Error " : "",
+		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+	return status;
+}
+
+static int ali1563_block(struct i2c_adapter *a,
+			 union i2c_smbus_data *data, u8 rw)
+{
+	int i, len;
+	int error = 0;
+
+	/* Do we need this? */
+	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
+
+	if (rw == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		if (len < 1)
+			len = 1;
+		else if (len > 32)
+			len = 32;
+		outb_p(len, SMB_HST_DAT0);
+		outb_p(data->block[1], SMB_BLK_DAT);
+	} else
+		len = 32;
+
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
+
+	for (i = 0; i < len; i++) {
+		if (rw == I2C_SMBUS_WRITE) {
+			outb_p(data->block[i + 1], SMB_BLK_DAT);
+			error = ali1563_block_start(a);
+			if (error)
+				break;
+		} else {
+			error = ali1563_block_start(a);
+			if (error)
+				break;
+			if (i == 0) {
+				len = inb_p(SMB_HST_DAT0);
+				if (len < 1)
+					len = 1;
+				else if (len > 32)
+					len = 32;
+			}
+			data->block[i+1] = inb_p(SMB_BLK_DAT);
+		}
+	}
+	/* Do we need this? */
+	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
+	return error;
+}
+
+static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
+			  unsigned short flags, char rw, u8 cmd,
+			  int size, union i2c_smbus_data *data)
+{
+	int error = 0;
+	int timeout;
+	u32 reg;
+
+	for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
+		reg = inb_p(SMB_HST_STS);
+		if (!(reg & HST_STS_BUSY))
+			break;
+	}
+	if (!timeout)
+		dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
+	outb_p(0xff, SMB_HST_STS);
+
+	/* Map the size to what the chip understands */
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		size = HST_CNTL2_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		size = HST_CNTL2_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		size = HST_CNTL2_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		size = HST_CNTL2_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		size = HST_CNTL2_BLOCK;
+		break;
+	default:
+		dev_warn(&a->dev, "Unsupported transaction %d\n", size);
+		error = -EOPNOTSUPP;
+		goto Done;
+	}
+
+	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
+	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
+	       (size << 3), SMB_HST_CNTL2);
+
+	/* Write the command register */
+
+	switch (size) {
+	case HST_CNTL2_BYTE:
+		if (rw == I2C_SMBUS_WRITE)
+			/* Beware it uses DAT0 register and not CMD! */
+			outb_p(cmd, SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_BYTE_DATA:
+		outb_p(cmd, SMB_HST_CMD);
+		if (rw == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_WORD_DATA:
+		outb_p(cmd, SMB_HST_CMD);
+		if (rw == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMB_HST_DAT0);
+			outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
+		}
+		break;
+	case HST_CNTL2_BLOCK:
+		outb_p(cmd, SMB_HST_CMD);
+		error = ali1563_block(a, data, rw);
+		goto Done;
+	}
+
+	error = ali1563_transaction(a, size);
+	if (error)
+		goto Done;
+
+	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
+		goto Done;
+
+	switch (size) {
+	case HST_CNTL2_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_BYTE_DATA:
+		data->byte = inb_p(SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_WORD_DATA:
+		data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
+		break;
+	}
+Done:
+	return error;
+}
+
+static u32 ali1563_func(struct i2c_adapter *a)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+
+static int ali1563_setup(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
+
+	/* SMB I/O Base in high 12 bits and must be aligned with the
+	 * size of the I/O space. */
+	ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
+	if (!ali1563_smba) {
+		dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
+		goto Err;
+	}
+
+	/* Check if device is enabled */
+	if (!(ctrl & ALI1563_SMB_HOSTEN)) {
+		dev_warn(&dev->dev, "Host Controller not enabled\n");
+		goto Err;
+	}
+	if (!(ctrl & ALI1563_SMB_IOEN)) {
+		dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
+		pci_write_config_word(dev, ALI1563_SMBBA,
+				      ctrl | ALI1563_SMB_IOEN);
+		pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
+		if (!(ctrl & ALI1563_SMB_IOEN)) {
+			dev_err(&dev->dev,
+				"I/O space still not enabled, giving up\n");
+			goto Err;
+		}
+	}
+
+	if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+			      ali1563_pci_driver.name))
+		goto Err;
+
+	if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+			    ali1563_pci_driver.name)) {
+		dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
+			ali1563_smba);
+		goto Err;
+	}
+	dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
+
+	return 0;
+Err:
+	return -ENODEV;
+}
+
+static void ali1563_shutdown(struct pci_dev *dev)
+{
+	release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
+}
+
+static const struct i2c_algorithm ali1563_algorithm = {
+	.smbus_xfer	= ali1563_access,
+	.functionality	= ali1563_func,
+};
+
+static struct i2c_adapter ali1563_adapter = {
+	.owner	= THIS_MODULE,
+	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo	= &ali1563_algorithm,
+};
+
+static int ali1563_probe(struct pci_dev *dev,
+			 const struct pci_device_id *id_table)
+{
+	int error;
+
+	error = ali1563_setup(dev);
+	if (error)
+		goto exit;
+	ali1563_adapter.dev.parent = &dev->dev;
+	snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
+		 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
+	error = i2c_add_adapter(&ali1563_adapter);
+	if (error)
+		goto exit_shutdown;
+	return 0;
+
+exit_shutdown:
+	ali1563_shutdown(dev);
+exit:
+	dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
+	return error;
+}
+
+static void ali1563_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&ali1563_adapter);
+	ali1563_shutdown(dev);
+}
+
+static const struct pci_device_id ali1563_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, ali1563_id_table);
+
+static struct pci_driver ali1563_pci_driver = {
+	.name		= "ali1563_smbus",
+	.id_table	= ali1563_id_table,
+	.probe		= ali1563_probe,
+	.remove		= ali1563_remove,
+};
+
+module_pci_driver(ali1563_pci_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali15x3.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali15x3.c
new file mode 100644
index 0000000..6e6bf46
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ali15x3.c
@@ -0,0 +1,517 @@
+/*
+    Copyright (c) 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com> and
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+    This is the driver for the SMB Host controller on
+    Acer Labs Inc. (ALI) M1541 and M1543C South Bridges.
+
+    The M1543C is a South bridge for desktop systems.
+    The M1533 is a South bridge for portable systems.
+    They are part of the following ALI chipsets:
+       "Aladdin Pro 2": Includes the M1621 Slot 1 North bridge
+       with AGP and 100MHz CPU Front Side bus
+       "Aladdin V": Includes the M1541 Socket 7 North bridge
+       with AGP and 100MHz CPU Front Side bus
+       "Aladdin IV": Includes the M1541 Socket 7 North bridge
+       with host bus up to 83.3 MHz.
+    For an overview of these chips see http://www.acerlabs.com
+
+    The M1533/M1543C devices appear as FOUR separate devices
+    on the PCI bus. An output of lspci will show something similar
+    to the following:
+
+	00:02.0 USB Controller: Acer Laboratories Inc. M5237
+	00:03.0 Bridge: Acer Laboratories Inc. M7101
+	00:07.0 ISA bridge: Acer Laboratories Inc. M1533
+	00:0f.0 IDE interface: Acer Laboratories Inc. M5229
+
+    The SMB controller is part of the 7101 device, which is an
+    ACPI-compliant Power Management Unit (PMU).
+
+    The whole 7101 device has to be enabled for the SMB to work.
+    You can't just enable the SMB alone.
+    The SMB and the ACPI have separate I/O spaces.
+    We make sure that the SMB is enabled. We leave the ACPI alone.
+
+    This driver controls the SMB Host only.
+    The SMB Slave controller on the M15X3 is not enabled.
+
+    This driver does not use interrupts.
+*/
+
+/* Note: we assume there can only be one ALI15X3, with one SMBus interface */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* ALI15X3 SMBus address offsets */
+#define SMBHSTSTS	(0 + ali15x3_smba)
+#define SMBHSTCNT	(1 + ali15x3_smba)
+#define SMBHSTSTART	(2 + ali15x3_smba)
+#define SMBHSTCMD	(7 + ali15x3_smba)
+#define SMBHSTADD	(3 + ali15x3_smba)
+#define SMBHSTDAT0	(4 + ali15x3_smba)
+#define SMBHSTDAT1	(5 + ali15x3_smba)
+#define SMBBLKDAT	(6 + ali15x3_smba)
+
+/* PCI Address Constants */
+#define SMBCOM		0x004
+#define SMBBA		0x014
+#define SMBATPC		0x05B	/* used to unlock xxxBA registers */
+#define SMBHSTCFG	0x0E0
+#define SMBSLVC		0x0E1
+#define SMBCLK		0x0E2
+#define SMBREV		0x008
+
+/* Other settings */
+#define MAX_TIMEOUT		200	/* times 1/100 sec */
+#define ALI15X3_SMB_IOSIZE	32
+
+/* this is what the Award 1004 BIOS sets them to on a ASUS P5A MB.
+   We don't use these here. If the bases aren't set to some value we
+   tell user to upgrade BIOS and we fail.
+*/
+#define ALI15X3_SMB_DEFAULTBASE	0xE800
+
+/* ALI15X3 address lock bits */
+#define ALI15X3_LOCK		0x06
+
+/* ALI15X3 command constants */
+#define ALI15X3_ABORT		0x02
+#define ALI15X3_T_OUT		0x04
+#define ALI15X3_QUICK		0x00
+#define ALI15X3_BYTE		0x10
+#define ALI15X3_BYTE_DATA	0x20
+#define ALI15X3_WORD_DATA	0x30
+#define ALI15X3_BLOCK_DATA	0x40
+#define ALI15X3_BLOCK_CLR	0x80
+
+/* ALI15X3 status register bits */
+#define ALI15X3_STS_IDLE	0x04
+#define ALI15X3_STS_BUSY	0x08
+#define ALI15X3_STS_DONE	0x10
+#define ALI15X3_STS_DEV		0x20	/* device error */
+#define ALI15X3_STS_COLL	0x40	/* collision or no response */
+#define ALI15X3_STS_TERM	0x80	/* terminated by abort */
+#define ALI15X3_STS_ERR		0xE0	/* all the bad error bits */
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr;
+module_param_hw(force_addr, ushort, ioport, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the i2c controller");
+
+static struct pci_driver ali15x3_driver;
+static unsigned short ali15x3_smba;
+
+static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
+{
+	u16 a;
+	unsigned char temp;
+
+	/* Check the following things:
+		- SMB I/O address is initialized
+		- Device is enabled
+		- We can use the addresses
+	*/
+
+	/* Unlock the register.
+	   The data sheet says that the address registers are read-only
+	   if the lock bits are 1, but in fact the address registers
+	   are zero unless you clear the lock bits.
+	*/
+	pci_read_config_byte(ALI15X3_dev, SMBATPC, &temp);
+	if (temp & ALI15X3_LOCK) {
+		temp &= ~ALI15X3_LOCK;
+		pci_write_config_byte(ALI15X3_dev, SMBATPC, temp);
+	}
+
+	/* Determine the address of the SMBus area */
+	pci_read_config_word(ALI15X3_dev, SMBBA, &ali15x3_smba);
+	ali15x3_smba &= (0xffff & ~(ALI15X3_SMB_IOSIZE - 1));
+	if (ali15x3_smba == 0 && force_addr == 0) {
+		dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region uninitialized "
+			"- upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+	if(force_addr)
+		ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
+
+	if (acpi_check_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+			      ali15x3_driver.name))
+		return -EBUSY;
+
+	if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+			    ali15x3_driver.name)) {
+		dev_err(&ALI15X3_dev->dev,
+			"ALI15X3_smb region 0x%x already in use!\n",
+			ali15x3_smba);
+		return -ENODEV;
+	}
+
+	if(force_addr) {
+		dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
+			ali15x3_smba);
+		if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev,
+								SMBBA,
+								ali15x3_smba))
+			goto error;
+		if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev,
+								SMBBA, &a))
+			goto error;
+		if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
+			/* make sure it works */
+			dev_err(&ALI15X3_dev->dev,
+				"force address failed - not supported?\n");
+			goto error;
+		}
+	}
+	/* check if whole device is enabled */
+	pci_read_config_byte(ALI15X3_dev, SMBCOM, &temp);
+	if ((temp & 1) == 0) {
+		dev_info(&ALI15X3_dev->dev, "enabling SMBus device\n");
+		pci_write_config_byte(ALI15X3_dev, SMBCOM, temp | 0x01);
+	}
+
+	/* Is SMB Host controller enabled? */
+	pci_read_config_byte(ALI15X3_dev, SMBHSTCFG, &temp);
+	if ((temp & 1) == 0) {
+		dev_info(&ALI15X3_dev->dev, "enabling SMBus controller\n");
+		pci_write_config_byte(ALI15X3_dev, SMBHSTCFG, temp | 0x01);
+	}
+
+	/* set SMB clock to 74KHz as recommended in data sheet */
+	pci_write_config_byte(ALI15X3_dev, SMBCLK, 0x20);
+
+	/*
+	  The interrupt routing for SMB is set up in register 0x77 in the
+	  1533 ISA Bridge device, NOT in the 7101 device.
+	  Don't bother with finding the 1533 device and reading the register.
+	if ((....... & 0x0F) == 1)
+		dev_dbg(&ALI15X3_dev->dev, "ALI15X3 using Interrupt 9 for SMBus.\n");
+	*/
+	pci_read_config_byte(ALI15X3_dev, SMBREV, &temp);
+	dev_dbg(&ALI15X3_dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&ALI15X3_dev->dev, "iALI15X3_smba = 0x%X\n", ali15x3_smba);
+
+	return 0;
+error:
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+	return -ENODEV;
+}
+
+/* Another internally used function */
+static int ali15x3_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS),
+		inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+		inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* get status */
+	temp = inb_p(SMBHSTSTS);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	/* Check the busy bit first */
+	if (temp & ALI15X3_STS_BUSY) {
+	/*
+	   If the host controller is still busy, it may have timed out in the
+	   previous transaction, resulting in a "SMBus Timeout" Dev.
+	   I've tried the following to reset a stuck busy bit.
+		1. Reset the controller with an ABORT command.
+		   (this doesn't seem to clear the controller if an external
+		   device is hung)
+		2. Reset the controller and the other SMBus devices with a
+		   T_OUT command.  (this clears the host busy bit if an
+		   external device is hung, but it comes back upon a new access
+		   to a device)
+		3. Disable and reenable the controller in SMBHSTCFG
+	   Worst case, nothing seems to work except power reset.
+	*/
+	/* Abort - reset the host controller */
+	/*
+	   Try resetting entire SMB bus, including other devices -
+	   This may not work either - it clears the BUSY bit but
+	   then the BUSY bit may come back on when you try and use the chip again.
+	   If that's the case you are stuck.
+	*/
+		dev_info(&adap->dev, "Resetting entire SMB Bus to "
+			"clear busy condition (%02x)\n", temp);
+		outb_p(ALI15X3_T_OUT, SMBHSTCNT);
+		temp = inb_p(SMBHSTSTS);
+	}
+
+	/* now check the error bits and the busy bit */
+	if (temp & (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) {
+		/* do a clear-on-write */
+		outb_p(0xFF, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) &
+		    (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) {
+			/* this is probably going to be correctable only by a power reset
+			   as one of the bits now appears to be stuck */
+			/* This may be a bus or device with electrical problems. */
+			dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - "
+				"controller or device on bus is probably hung\n",
+				temp);
+			return -EBUSY;
+		}
+	} else {
+		/* check and clear done bit */
+		if (temp & ALI15X3_STS_DONE) {
+			outb_p(temp, SMBHSTSTS);
+		}
+	}
+
+	/* start the transaction by writing anything to the start register */
+	outb_p(0xFF, SMBHSTSTART);
+
+	/* We will always wait for a fraction of a second! */
+	timeout = 0;
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((!(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)))
+		 && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		result = -ETIMEDOUT;
+		dev_err(&adap->dev, "SMBus Timeout!\n");
+	}
+
+	if (temp & ALI15X3_STS_TERM) {
+		result = -EIO;
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+	}
+
+	/*
+	  Unfortunately the ALI SMB controller maps "no response" and "bus
+	  collision" into a single bit. No response is the usual case so don't
+	  do a printk.
+	  This means that bus collisions go unreported.
+	*/
+	if (temp & ALI15X3_STS_COLL) {
+		result = -ENXIO;
+		dev_dbg(&adap->dev,
+			"Error: no response or bus collision ADD=%02x\n",
+			inb_p(SMBHSTADD));
+	}
+
+	/* haven't ever seen this */
+	if (temp & ALI15X3_STS_DEV) {
+		result = -EIO;
+		dev_err(&adap->dev, "Error: device error\n");
+	}
+	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS),
+		inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+		inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
+		   unsigned short flags, char read_write, u8 command,
+		   int size, union i2c_smbus_data * data)
+{
+	int i, len;
+	int temp;
+	int timeout;
+
+	/* clear all the bits (clear-on-write) */
+	outb_p(0xFF, SMBHSTSTS);
+	/* make sure SMBus is idle */
+	temp = inb_p(SMBHSTSTS);
+	for (timeout = 0;
+	     (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE);
+	     timeout++) {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	}
+	if (timeout >= MAX_TIMEOUT) {
+		dev_err(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);
+	}
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI15X3_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = ALI15X3_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = ALI15X3_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = ALI15X3_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0) {
+				len = 0;
+				data->block[0] = len;
+			}
+			if (len > 32) {
+				len = 32;
+				data->block[0] = len;
+			}
+			outb_p(len, SMBHSTDAT0);
+			/* Reset SMBBLKDAT */
+			outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT);
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = ALI15X3_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	outb_p(size, SMBHSTCNT);	/* output command */
+
+	temp = ali15x3_transaction(adap);
+	if (temp)
+		return temp;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case ALI15X3_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI15X3_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI15X3_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case ALI15X3_BLOCK_DATA:
+		len = inb_p(SMBHSTDAT0);
+		if (len > 32)
+			len = 32;
+		data->block[0] = len;
+		/* Reset SMBBLKDAT */
+		outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT);
+		for (i = 1; i <= data->block[0]; i++) {
+			data->block[i] = inb_p(SMBBLKDAT);
+			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
+				len, i, data->block[i]);
+		}
+		break;
+	}
+	return 0;
+}
+
+static u32 ali15x3_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= ali15x3_access,
+	.functionality	= ali15x3_func,
+};
+
+static struct i2c_adapter ali15x3_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static const struct pci_device_id ali15x3_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, ali15x3_ids);
+
+static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (ali15x3_setup(dev)) {
+		dev_err(&dev->dev,
+			"ALI15X3 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	ali15x3_adapter.dev.parent = &dev->dev;
+
+	snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name),
+		"SMBus ALI15X3 adapter at %04x", ali15x3_smba);
+	return i2c_add_adapter(&ali15x3_adapter);
+}
+
+static void ali15x3_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&ali15x3_adapter);
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+}
+
+static struct pci_driver ali15x3_driver = {
+	.name		= "ali15x3_smbus",
+	.id_table	= ali15x3_ids,
+	.probe		= ali15x3_probe,
+	.remove		= ali15x3_remove,
+};
+
+module_pci_driver(ali15x3_driver);
+
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+		"Philip Edelbrock <phil@netroedge.com>, "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("ALI15X3 SMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-altera.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-altera.c
new file mode 100644
index 0000000..1d59eed
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-altera.c
@@ -0,0 +1,518 @@
+/*
+ *  Copyright Intel Corporation (C) 2017.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Based on the i2c-axxia.c driver.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#define ALTR_I2C_TFR_CMD	0x00	/* Transfer Command register */
+#define     ALTR_I2C_TFR_CMD_STA	BIT(9)	/* send START before byte */
+#define     ALTR_I2C_TFR_CMD_STO	BIT(8)	/* send STOP after byte */
+#define     ALTR_I2C_TFR_CMD_RW_D	BIT(0)	/* Direction of transfer */
+#define ALTR_I2C_RX_DATA	0x04	/* RX data FIFO register */
+#define ALTR_I2C_CTRL		0x08	/* Control register */
+#define     ALTR_I2C_CTRL_RXT_SHFT	4	/* RX FIFO Threshold */
+#define     ALTR_I2C_CTRL_TCT_SHFT	2	/* TFER CMD FIFO Threshold */
+#define     ALTR_I2C_CTRL_BSPEED	BIT(1)	/* Bus Speed (1=Fast) */
+#define     ALTR_I2C_CTRL_EN	BIT(0)	/* Enable Core (1=Enable) */
+#define ALTR_I2C_ISER		0x0C	/* Interrupt Status Enable register */
+#define     ALTR_I2C_ISER_RXOF_EN	BIT(4)	/* Enable RX OVERFLOW IRQ */
+#define     ALTR_I2C_ISER_ARB_EN	BIT(3)	/* Enable ARB LOST IRQ */
+#define     ALTR_I2C_ISER_NACK_EN	BIT(2)	/* Enable NACK DET IRQ */
+#define     ALTR_I2C_ISER_RXRDY_EN	BIT(1)	/* Enable RX Ready IRQ */
+#define     ALTR_I2C_ISER_TXRDY_EN	BIT(0)	/* Enable TX Ready IRQ */
+#define ALTR_I2C_ISR		0x10	/* Interrupt Status register */
+#define     ALTR_I2C_ISR_RXOF		BIT(4)	/* RX OVERFLOW IRQ */
+#define     ALTR_I2C_ISR_ARB		BIT(3)	/* ARB LOST IRQ */
+#define     ALTR_I2C_ISR_NACK		BIT(2)	/* NACK DET IRQ */
+#define     ALTR_I2C_ISR_RXRDY		BIT(1)	/* RX Ready IRQ */
+#define     ALTR_I2C_ISR_TXRDY		BIT(0)	/* TX Ready IRQ */
+#define ALTR_I2C_STATUS		0x14	/* Status register */
+#define     ALTR_I2C_STAT_CORE		BIT(0)	/* Core Status (0=idle) */
+#define ALTR_I2C_TC_FIFO_LVL	0x18	/* Transfer FIFO LVL register */
+#define ALTR_I2C_RX_FIFO_LVL	0x1C	/* Receive FIFO LVL register */
+#define ALTR_I2C_SCL_LOW	0x20	/* SCL low count register */
+#define ALTR_I2C_SCL_HIGH	0x24	/* SCL high count register */
+#define ALTR_I2C_SDA_HOLD	0x28	/* SDA hold count register */
+
+#define ALTR_I2C_ALL_IRQ	(ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \
+				 ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \
+				 ALTR_I2C_ISR_TXRDY)
+
+#define ALTR_I2C_THRESHOLD	0	/* IRQ Threshold at 1 element */
+#define ALTR_I2C_DFLT_FIFO_SZ	4
+#define ALTR_I2C_TIMEOUT	100000	/* 100ms */
+#define ALTR_I2C_XFER_TIMEOUT	(msecs_to_jiffies(250))
+
+/**
+ * altr_i2c_dev - I2C device context
+ * @base: pointer to register struct
+ * @msg: pointer to current message
+ * @msg_len: number of bytes transferred in msg
+ * @msg_err: error code for completed message
+ * @msg_complete: xfer completion object
+ * @dev: device reference
+ * @adapter: core i2c abstraction
+ * @i2c_clk: clock reference for i2c input clock
+ * @bus_clk_rate: current i2c bus clock rate
+ * @buf: ptr to msg buffer for easier use.
+ * @fifo_size: size of the FIFO passed in.
+ * @isr_mask: cached copy of local ISR enables.
+ * @isr_status: cached copy of local ISR status.
+ * @lock: spinlock for IRQ synchronization.
+ * @isr_mutex: mutex for IRQ thread.
+ */
+struct altr_i2c_dev {
+	void __iomem *base;
+	struct i2c_msg *msg;
+	size_t msg_len;
+	int msg_err;
+	struct completion msg_complete;
+	struct device *dev;
+	struct i2c_adapter adapter;
+	struct clk *i2c_clk;
+	u32 bus_clk_rate;
+	u8 *buf;
+	u32 fifo_size;
+	u32 isr_mask;
+	u32 isr_status;
+	spinlock_t lock;	/* IRQ synchronization */
+	struct mutex isr_mutex;
+};
+
+static void
+altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
+{
+	unsigned long flags;
+	u32 int_en;
+
+	spin_lock_irqsave(&idev->lock, flags);
+
+	int_en = readl(idev->base + ALTR_I2C_ISER);
+	if (enable)
+		idev->isr_mask = int_en | mask;
+	else
+		idev->isr_mask = int_en & ~mask;
+
+	writel(idev->isr_mask, idev->base + ALTR_I2C_ISER);
+
+	spin_unlock_irqrestore(&idev->lock, flags);
+}
+
+static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask)
+{
+	u32 int_en = readl(idev->base + ALTR_I2C_ISR);
+
+	writel(int_en | mask, idev->base + ALTR_I2C_ISR);
+}
+
+static void altr_i2c_core_disable(struct altr_i2c_dev *idev)
+{
+	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
+
+	writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
+}
+
+static void altr_i2c_core_enable(struct altr_i2c_dev *idev)
+{
+	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
+
+	writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
+}
+
+static void altr_i2c_reset(struct altr_i2c_dev *idev)
+{
+	altr_i2c_core_disable(idev);
+	altr_i2c_core_enable(idev);
+}
+
+static inline void altr_i2c_stop(struct altr_i2c_dev *idev)
+{
+	writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD);
+}
+
+static void altr_i2c_init(struct altr_i2c_dev *idev)
+{
+	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
+	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
+	u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) |
+		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
+	u32 t_high, t_low;
+
+	if (idev->bus_clk_rate <= 100000) {
+		tmp &= ~ALTR_I2C_CTRL_BSPEED;
+		/* Standard mode SCL 50/50 */
+		t_high = divisor * 1 / 2;
+		t_low = divisor * 1 / 2;
+	} else {
+		tmp |= ALTR_I2C_CTRL_BSPEED;
+		/* Fast mode SCL 33/66 */
+		t_high = divisor * 1 / 3;
+		t_low = divisor * 2 / 3;
+	}
+	writel(tmp, idev->base + ALTR_I2C_CTRL);
+
+	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
+		idev->bus_clk_rate, clk_mhz, divisor);
+
+	/* Reset controller */
+	altr_i2c_reset(idev);
+
+	/* SCL High Time */
+	writel(t_high, idev->base + ALTR_I2C_SCL_HIGH);
+	/* SCL Low Time */
+	writel(t_low, idev->base + ALTR_I2C_SCL_LOW);
+	/* SDA Hold Time, 300ns */
+	writel(3 * clk_mhz / 10, idev->base + ALTR_I2C_SDA_HOLD);
+
+	/* Mask all master interrupt bits */
+	altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
+}
+
+/**
+ * altr_i2c_transfer - On the last byte to be transmitted, send
+ * a Stop bit on the last byte.
+ */
+static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data)
+{
+	/* On the last byte to be transmitted, send STOP */
+	if (idev->msg_len == 1)
+		data |= ALTR_I2C_TFR_CMD_STO;
+	if (idev->msg_len > 0)
+		writel(data, idev->base + ALTR_I2C_TFR_CMD);
+}
+
+/**
+ * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of
+ * transfer. Send a Stop bit on the last byte.
+ */
+static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev)
+{
+	size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL);
+	int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len);
+
+	while (bytes_to_transfer-- > 0) {
+		*idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA);
+		idev->msg_len--;
+		altr_i2c_transfer(idev, 0);
+	}
+}
+
+/**
+ * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
+ * @return: Number of bytes left to transfer.
+ */
+static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev)
+{
+	size_t tx_fifo_avail = idev->fifo_size - readl(idev->base +
+						       ALTR_I2C_TC_FIFO_LVL);
+	int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len);
+	int ret = idev->msg_len - bytes_to_transfer;
+
+	while (bytes_to_transfer-- > 0) {
+		altr_i2c_transfer(idev, *idev->buf++);
+		idev->msg_len--;
+	}
+
+	return ret;
+}
+
+static irqreturn_t altr_i2c_isr_quick(int irq, void *_dev)
+{
+	struct altr_i2c_dev *idev = _dev;
+	irqreturn_t ret = IRQ_HANDLED;
+
+	/* Read IRQ status but only interested in Enabled IRQs. */
+	idev->isr_status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask;
+	if (idev->isr_status)
+		ret = IRQ_WAKE_THREAD;
+
+	return ret;
+}
+
+static irqreturn_t altr_i2c_isr(int irq, void *_dev)
+{
+	int ret;
+	bool read, finish = false;
+	struct altr_i2c_dev *idev = _dev;
+	u32 status = idev->isr_status;
+
+	mutex_lock(&idev->isr_mutex);
+	if (!idev->msg) {
+		dev_warn(idev->dev, "unexpected interrupt\n");
+		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+		goto out;
+	}
+	read = (idev->msg->flags & I2C_M_RD) != 0;
+
+	/* handle Lost Arbitration */
+	if (unlikely(status & ALTR_I2C_ISR_ARB)) {
+		altr_i2c_int_clear(idev, ALTR_I2C_ISR_ARB);
+		idev->msg_err = -EAGAIN;
+		finish = true;
+	} else if (unlikely(status & ALTR_I2C_ISR_NACK)) {
+		dev_dbg(idev->dev, "Could not get ACK\n");
+		idev->msg_err = -ENXIO;
+		altr_i2c_int_clear(idev, ALTR_I2C_ISR_NACK);
+		altr_i2c_stop(idev);
+		finish = true;
+	} else if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) {
+		/* handle RX FIFO Overflow */
+		altr_i2c_empty_rx_fifo(idev);
+		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
+		altr_i2c_stop(idev);
+		dev_err(idev->dev, "RX FIFO Overflow\n");
+		finish = true;
+	} else if (read && (status & ALTR_I2C_ISR_RXRDY)) {
+		/* RX FIFO needs service? */
+		altr_i2c_empty_rx_fifo(idev);
+		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
+		if (!idev->msg_len)
+			finish = true;
+	} else if (!read && (status & ALTR_I2C_ISR_TXRDY)) {
+		/* TX FIFO needs service? */
+		altr_i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY);
+		if (idev->msg_len > 0)
+			altr_i2c_fill_tx_fifo(idev);
+		else
+			finish = true;
+	} else {
+		dev_warn(idev->dev, "Unexpected interrupt: 0x%x\n", status);
+		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+	}
+
+	if (finish) {
+		/* Wait for the Core to finish */
+		ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS,
+						status,
+						!(status & ALTR_I2C_STAT_CORE),
+						1, ALTR_I2C_TIMEOUT);
+		if (ret)
+			dev_err(idev->dev, "message timeout\n");
+		altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
+		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+		complete(&idev->msg_complete);
+		dev_dbg(idev->dev, "Message Complete\n");
+	}
+out:
+	mutex_unlock(&idev->isr_mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
+{
+	u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK;
+	unsigned long time_left;
+	u32 value;
+	u8 addr = i2c_8bit_addr_from_msg(msg);
+
+	mutex_lock(&idev->isr_mutex);
+	idev->msg = msg;
+	idev->msg_len = msg->len;
+	idev->buf = msg->buf;
+	idev->msg_err = 0;
+	reinit_completion(&idev->msg_complete);
+	altr_i2c_core_enable(idev);
+
+	/* Make sure RX FIFO is empty */
+	do {
+		readl(idev->base + ALTR_I2C_RX_DATA);
+	} while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL));
+
+	writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD);
+
+	if ((msg->flags & I2C_M_RD) != 0) {
+		imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN;
+		altr_i2c_int_enable(idev, imask, true);
+		/* write the first byte to start the RX */
+		altr_i2c_transfer(idev, 0);
+	} else {
+		imask |= ALTR_I2C_ISR_TXRDY;
+		altr_i2c_int_enable(idev, imask, true);
+		altr_i2c_fill_tx_fifo(idev);
+	}
+	mutex_unlock(&idev->isr_mutex);
+
+	time_left = wait_for_completion_timeout(&idev->msg_complete,
+						ALTR_I2C_XFER_TIMEOUT);
+	altr_i2c_int_enable(idev, imask, false);
+
+	value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE;
+	if (value)
+		dev_err(idev->dev, "Core Status not IDLE...\n");
+
+	if (time_left == 0) {
+		idev->msg_err = -ETIMEDOUT;
+		dev_dbg(idev->dev, "Transaction timed out.\n");
+	}
+
+	altr_i2c_core_disable(idev);
+
+	return idev->msg_err;
+}
+
+static int
+altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct altr_i2c_dev *idev = i2c_get_adapdata(adap);
+	int i, ret;
+
+	for (i = 0; i < num; i++) {
+		ret = altr_i2c_xfer_msg(idev, msgs++);
+		if (ret)
+			return ret;
+	}
+	return num;
+}
+
+static u32 altr_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm altr_i2c_algo = {
+	.master_xfer = altr_i2c_xfer,
+	.functionality = altr_i2c_func,
+};
+
+static int altr_i2c_probe(struct platform_device *pdev)
+{
+	struct altr_i2c_dev *idev = NULL;
+	struct resource *res;
+	int irq, ret;
+
+	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+	if (!idev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	idev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(idev->base))
+		return PTR_ERR(idev->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing interrupt resource\n");
+		return irq;
+	}
+
+	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(idev->i2c_clk)) {
+		dev_err(&pdev->dev, "missing clock\n");
+		return PTR_ERR(idev->i2c_clk);
+	}
+
+	idev->dev = &pdev->dev;
+	init_completion(&idev->msg_complete);
+	spin_lock_init(&idev->lock);
+	mutex_init(&idev->isr_mutex);
+
+	ret = device_property_read_u32(idev->dev, "fifo-size",
+				       &idev->fifo_size);
+	if (ret) {
+		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
+			ALTR_I2C_DFLT_FIFO_SZ);
+		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
+	}
+
+	ret = device_property_read_u32(idev->dev, "clock-frequency",
+				       &idev->bus_clk_rate);
+	if (ret) {
+		dev_err(&pdev->dev, "Default to 100kHz\n");
+		idev->bus_clk_rate = 100000;	/* default clock rate */
+	}
+
+	if (idev->bus_clk_rate > 400000) {
+		dev_err(&pdev->dev, "invalid clock-frequency %d\n",
+			idev->bus_clk_rate);
+		return -EINVAL;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, altr_i2c_isr_quick,
+					altr_i2c_isr, IRQF_ONESHOT,
+					pdev->name, idev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	altr_i2c_init(idev);
+
+	i2c_set_adapdata(&idev->adapter, idev);
+	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
+	idev->adapter.owner = THIS_MODULE;
+	idev->adapter.algo = &altr_i2c_algo;
+	idev->adapter.dev.parent = &pdev->dev;
+	idev->adapter.dev.of_node = pdev->dev.of_node;
+
+	platform_set_drvdata(pdev, idev);
+
+	ret = i2c_add_adapter(&idev->adapter);
+	if (ret) {
+		clk_disable_unprepare(idev->i2c_clk);
+		return ret;
+	}
+	dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n");
+
+	return 0;
+}
+
+static int altr_i2c_remove(struct platform_device *pdev)
+{
+	struct altr_i2c_dev *idev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(idev->i2c_clk);
+	i2c_del_adapter(&idev->adapter);
+
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id altr_i2c_of_match[] = {
+	{ .compatible = "altr,softip-i2c-v1.0" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_i2c_of_match);
+
+static struct platform_driver altr_i2c_driver = {
+	.probe = altr_i2c_probe,
+	.remove = altr_i2c_remove,
+	.driver = {
+		.name = "altera-i2c",
+		.of_match_table = altr_i2c_of_match,
+	},
+};
+
+module_platform_driver(altr_i2c_driver);
+
+MODULE_DESCRIPTION("Altera Soft IP I2C bus driver");
+MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756-s4882.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756-s4882.c
new file mode 100644
index 0000000..65e3240
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -0,0 +1,254 @@
+/*
+ * i2c-amd756-s4882.c - i2c-amd756 extras for the Tyan S4882 motherboard
+ *
+ * Copyright (C) 2004, 2008 Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+ 
+/*
+ * We select the channels by sending commands to the Philips
+ * PCA9556 chip at I2C address 0x18. The main adapter is used for
+ * the non-multiplexed part of the bus, and 4 virtual adapters
+ * are defined for the multiplexed addresses: 0x50-0x53 (memory
+ * module EEPROM) located on channels 1-4, and 0x4c (LM63)
+ * located on multiplexed channels 0 and 5-7. We define one
+ * virtual adapter per CPU, which corresponds to two multiplexed
+ * channels:
+ *   CPU0: virtual adapter 1, channels 1 and 0
+ *   CPU1: virtual adapter 2, channels 2 and 5
+ *   CPU2: virtual adapter 3, channels 3 and 6
+ *   CPU3: virtual adapter 4, channels 4 and 7
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+extern struct i2c_adapter amd756_smbus;
+
+static struct i2c_adapter *s4882_adapter;
+static struct i2c_algorithm *s4882_algo;
+
+/* Wrapper access functions for multiplexed SMBus */
+static DEFINE_MUTEX(amd756_lock);
+
+static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	int error;
+
+	/* We exclude the multiplexed addresses */
+	if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
+	 || addr == 0x18)
+		return -ENXIO;
+
+	mutex_lock(&amd756_lock);
+
+	error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
+					      command, size, data);
+
+	mutex_unlock(&amd756_lock);
+
+	return error;
+}
+
+/* We remember the last used channels combination so as to only switch
+   channels when it is really needed. This greatly reduces the SMBus
+   overhead, but also assumes that nobody will be writing to the PCA9556
+   in our back. */
+static u8 last_channels;
+
+static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr,
+					unsigned short flags, char read_write,
+					u8 command, int size,
+					union i2c_smbus_data * data,
+					u8 channels)
+{
+	int error;
+
+	/* We exclude the non-multiplexed addresses */
+	if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
+		return -ENXIO;
+
+	mutex_lock(&amd756_lock);
+
+	if (last_channels != channels) {
+		union i2c_smbus_data mplxdata;
+		mplxdata.byte = channels;
+
+		error = amd756_smbus.algo->smbus_xfer(adap, 0x18, 0,
+						      I2C_SMBUS_WRITE, 0x01,
+						      I2C_SMBUS_BYTE_DATA,
+						      &mplxdata);
+		if (error)
+			goto UNLOCK;
+		last_channels = channels;
+	}
+	error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
+					      command, size, data);
+
+UNLOCK:
+	mutex_unlock(&amd756_lock);
+	return error;
+}
+
+static s32 amd756_access_virt1(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU0: channels 1 and 0 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x03);
+}
+
+static s32 amd756_access_virt2(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU1: channels 2 and 5 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x24);
+}
+
+static s32 amd756_access_virt3(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU2: channels 3 and 6 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x48);
+}
+
+static s32 amd756_access_virt4(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU3: channels 4 and 7 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x90);
+}
+
+static int __init amd756_s4882_init(void)
+{
+	int i, error;
+	union i2c_smbus_data ioconfig;
+
+	if (!amd756_smbus.dev.parent)
+		return -ENODEV;
+
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+			       I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR0;
+	}
+
+	/* Unregister physical bus */
+	i2c_del_adapter(&amd756_smbus);
+
+	printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
+	/* Define the 5 virtual adapters and algorithms structures */
+	if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
+				      GFP_KERNEL))) {
+		error = -ENOMEM;
+		goto ERROR1;
+	}
+	if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm),
+				   GFP_KERNEL))) {
+		error = -ENOMEM;
+		goto ERROR2;
+	}
+
+	/* Fill in the new structures */
+	s4882_algo[0] = *(amd756_smbus.algo);
+	s4882_algo[0].smbus_xfer = amd756_access_virt0;
+	s4882_adapter[0] = amd756_smbus;
+	s4882_adapter[0].algo = s4882_algo;
+	s4882_adapter[0].dev.parent = amd756_smbus.dev.parent;
+	for (i = 1; i < 5; i++) {
+		s4882_algo[i] = *(amd756_smbus.algo);
+		s4882_adapter[i] = amd756_smbus;
+		snprintf(s4882_adapter[i].name, sizeof(s4882_adapter[i].name),
+			 "SMBus 8111 adapter (CPU%d)", i-1);
+		s4882_adapter[i].algo = s4882_algo+i;
+		s4882_adapter[i].dev.parent = amd756_smbus.dev.parent;
+	}
+	s4882_algo[1].smbus_xfer = amd756_access_virt1;
+	s4882_algo[2].smbus_xfer = amd756_access_virt2;
+	s4882_algo[3].smbus_xfer = amd756_access_virt3;
+	s4882_algo[4].smbus_xfer = amd756_access_virt4;
+
+	/* Register virtual adapters */
+	for (i = 0; i < 5; i++) {
+		error = i2c_add_adapter(s4882_adapter+i);
+		if (error) {
+			printk(KERN_ERR "i2c-amd756-s4882: "
+			       "Virtual adapter %d registration "
+			       "failed, module not inserted\n", i);
+			for (i--; i >= 0; i--)
+				i2c_del_adapter(s4882_adapter+i);
+			goto ERROR3;
+		}
+	}
+
+	return 0;
+
+ERROR3:
+	kfree(s4882_algo);
+	s4882_algo = NULL;
+ERROR2:
+	kfree(s4882_adapter);
+	s4882_adapter = NULL;
+ERROR1:
+	/* Restore physical bus */
+	i2c_add_adapter(&amd756_smbus);
+ERROR0:
+	return error;
+}
+
+static void __exit amd756_s4882_exit(void)
+{
+	if (s4882_adapter) {
+		int i;
+
+		for (i = 0; i < 5; i++)
+			i2c_del_adapter(s4882_adapter+i);
+		kfree(s4882_adapter);
+		s4882_adapter = NULL;
+	}
+	kfree(s4882_algo);
+	s4882_algo = NULL;
+
+	/* Restore physical bus */
+	if (i2c_add_adapter(&amd756_smbus))
+		printk(KERN_ERR "i2c-amd756-s4882: "
+		       "Physical bus restoration failed\n");
+}
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("S4882 SMBus multiplexing");
+MODULE_LICENSE("GPL");
+
+module_init(amd756_s4882_init);
+module_exit(amd756_s4882_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756.c
new file mode 100644
index 0000000..274908c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd756.c
@@ -0,0 +1,410 @@
+/*
+    Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
+
+    Shamelessly ripped from i2c-piix4.c:
+
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+    2002-04-08: Added nForce support. (Csaba Halasz)
+    2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
+    2002-12-28: Rewritten into something that resembles a Linux driver (hch)
+    2003-11-29: Added back AMD8111 removed by the previous rewrite.
+                (Philip Pokorny)
+*/
+
+/*
+   Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* AMD756 SMBus address offsets */
+#define SMB_ADDR_OFFSET		0xE0
+#define SMB_IOSIZE		16
+#define SMB_GLOBAL_STATUS	(0x0 + amd756_ioport)
+#define SMB_GLOBAL_ENABLE	(0x2 + amd756_ioport)
+#define SMB_HOST_ADDRESS	(0x4 + amd756_ioport)
+#define SMB_HOST_DATA		(0x6 + amd756_ioport)
+#define SMB_HOST_COMMAND	(0x8 + amd756_ioport)
+#define SMB_HOST_BLOCK_DATA	(0x9 + amd756_ioport)
+#define SMB_HAS_DATA		(0xA + amd756_ioport)
+#define SMB_HAS_DEVICE_ADDRESS	(0xC + amd756_ioport)
+#define SMB_HAS_HOST_ADDRESS	(0xE + amd756_ioport)
+#define SMB_SNOOP_ADDRESS	(0xF + amd756_ioport)
+
+/* PCI Address Constants */
+
+/* address of I/O space */
+#define SMBBA		0x058		/* mh */
+#define SMBBANFORCE	0x014
+
+/* general configuration */
+#define SMBGCFG		0x041		/* mh */
+
+/* silicon revision code */
+#define SMBREV		0x008
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+
+/* AMD756 constants */
+#define AMD756_QUICK		0x00
+#define AMD756_BYTE		0x01
+#define AMD756_BYTE_DATA	0x02
+#define AMD756_WORD_DATA	0x03
+#define AMD756_PROCESS_CALL	0x04
+#define AMD756_BLOCK_DATA	0x05
+
+static struct pci_driver amd756_driver;
+static unsigned short amd756_ioport;
+
+/* 
+  SMBUS event = I/O 28-29 bit 11
+     see E0 for the status bits and enabled in E2
+     
+*/
+#define GS_ABRT_STS	(1 << 0)
+#define GS_COL_STS	(1 << 1)
+#define GS_PRERR_STS	(1 << 2)
+#define GS_HST_STS	(1 << 3)
+#define GS_HCYC_STS	(1 << 4)
+#define GS_TO_STS	(1 << 5)
+#define GS_SMB_STS	(1 << 11)
+
+#define GS_CLEAR_STS	(GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
+			 GS_HCYC_STS | GS_TO_STS )
+
+#define GE_CYC_TYPE_MASK	(7)
+#define GE_HOST_STC		(1 << 3)
+#define GE_ABORT		(1 << 5)
+
+
+static int amd756_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
+		"DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
+		inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
+		inb_p(SMB_HOST_DATA));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
+		do {
+			msleep(1);
+			temp = inw_p(SMB_GLOBAL_STATUS);
+		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
+		         (timeout++ < MAX_TIMEOUT));
+		/* If the SMBus is still busy, we give up */
+		if (timeout > MAX_TIMEOUT) {
+			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
+			goto abort;
+		}
+		timeout = 0;
+	}
+
+	/* start the transaction by setting the start bit */
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = inw_p(SMB_GLOBAL_STATUS);
+	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "Completion timeout!\n");
+		goto abort;
+	}
+
+	if (temp & GS_PRERR_STS) {
+		result = -ENXIO;
+		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
+	}
+
+	if (temp & GS_COL_STS) {
+		result = -EIO;
+		dev_warn(&adap->dev, "SMBus collision!\n");
+	}
+
+	if (temp & GS_TO_STS) {
+		result = -ETIMEDOUT;
+		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
+	}
+
+	if (temp & GS_HCYC_STS)
+		dev_dbg(&adap->dev, "SMBus protocol success!\n");
+
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+
+#ifdef DEBUG
+	if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
+		dev_dbg(&adap->dev,
+			"Failed reset at end of transaction (%04x)\n", temp);
+	}
+#endif
+
+	dev_dbg(&adap->dev,
+		"Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
+		inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
+		inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
+
+	return result;
+
+ abort:
+	dev_warn(&adap->dev, "Sending abort\n");
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
+	msleep(100);
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+	return -EIO;
+}
+
+/* Return negative errno on error. */
+static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
+		  unsigned short flags, char read_write,
+		  u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		size = AMD756_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMB_HOST_DATA);
+		size = AMD756_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->byte, SMB_HOST_DATA);
+		size = AMD756_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->word, SMB_HOST_DATA);	/* TODO: endian???? */
+		size = AMD756_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > 32)
+				len = 32;
+			outw_p(len, SMB_HOST_DATA);
+			/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i],
+				       SMB_HOST_BLOCK_DATA);
+		}
+		size = AMD756_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	/* How about enabling interrupts... */
+	outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
+
+	status = amd756_transaction(adap);
+	if (status)
+		return status;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case AMD756_BYTE:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_BYTE_DATA:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_WORD_DATA:
+		data->word = inw_p(SMB_HOST_DATA);	/* TODO: endian???? */
+		break;
+	case AMD756_BLOCK_DATA:
+		data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
+		if(data->block[0] > 32)
+			data->block[0] = 32;
+		/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 amd756_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= amd756_access,
+	.functionality	= amd756_func,
+};
+
+struct i2c_adapter amd756_smbus = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
+static const char* chipname[] = {
+	"AMD756", "AMD766", "AMD768",
+	"nVidia nForce", "AMD8111",
+};
+
+static const struct pci_device_id amd756_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
+	  .driver_data = AMD756 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
+	  .driver_data = AMD766 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443),
+	  .driver_data = AMD768 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS),
+	  .driver_data = AMD8111 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS),
+	  .driver_data = NFORCE },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, amd756_ids);
+
+static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int nforce = (id->driver_data == NFORCE);
+	int error;
+	u8 temp;
+	
+	if (amd756_ioport) {
+		dev_err(&pdev->dev, "Only one device supported "
+		       "(you have a strange motherboard, btw)\n");
+		return -ENODEV;
+	}
+
+	if (nforce) {
+		if (PCI_FUNC(pdev->devfn) != 1)
+			return -ENODEV;
+
+		pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
+		amd756_ioport &= 0xfffc;
+	} else { /* amd */
+		if (PCI_FUNC(pdev->devfn) != 3)
+			return -ENODEV;
+
+		pci_read_config_byte(pdev, SMBGCFG, &temp);
+		if ((temp & 128) == 0) {
+			dev_err(&pdev->dev,
+				"Error: SMBus controller I/O not enabled!\n");
+			return -ENODEV;
+		}
+
+		/* Determine the address of the SMBus areas */
+		/* Technically it is a dword but... */
+		pci_read_config_word(pdev, SMBBA, &amd756_ioport);
+		amd756_ioport &= 0xff00;
+		amd756_ioport += SMB_ADDR_OFFSET;
+	}
+
+	error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
+				  amd756_driver.name);
+	if (error)
+		return -ENODEV;
+
+	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
+		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
+			amd756_ioport);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(pdev, SMBREV, &temp);
+	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport);
+
+	/* set up the sysfs linkage to our parent device */
+	amd756_smbus.dev.parent = &pdev->dev;
+
+	snprintf(amd756_smbus.name, sizeof(amd756_smbus.name),
+		 "SMBus %s adapter at %04x", chipname[id->driver_data],
+		 amd756_ioport);
+
+	error = i2c_add_adapter(&amd756_smbus);
+	if (error)
+		goto out_err;
+
+	return 0;
+
+ out_err:
+	release_region(amd756_ioport, SMB_IOSIZE);
+	return error;
+}
+
+static void amd756_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&amd756_smbus);
+	release_region(amd756_ioport, SMB_IOSIZE);
+}
+
+static struct pci_driver amd756_driver = {
+	.name		= "amd756_smbus",
+	.id_table	= amd756_ids,
+	.probe		= amd756_probe,
+	.remove		= amd756_remove,
+};
+
+module_pci_driver(amd756_driver);
+
+MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
+MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(amd756_smbus);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd8111.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd8111.c
new file mode 100644
index 0000000..95a80a8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-amd8111.c
@@ -0,0 +1,492 @@
+/*
+ * SMBus 2.0 driver for AMD-8111 IO-Hub.
+ *
+ * Copyright (c) 2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver");
+
+struct amd_smbus {
+	struct pci_dev *dev;
+	struct i2c_adapter adapter;
+	int base;
+	int size;
+};
+
+static struct pci_driver amd8111_driver;
+
+/*
+ * AMD PCI control registers definitions.
+ */
+
+#define AMD_PCI_MISC	0x48
+
+#define AMD_PCI_MISC_SCI	0x04	/* deliver SCI */
+#define AMD_PCI_MISC_INT	0x02	/* deliver PCI IRQ */
+#define AMD_PCI_MISC_SPEEDUP	0x01	/* 16x clock speedup */
+
+/*
+ * ACPI 2.0 chapter 13 PCI interface definitions.
+ */
+
+#define AMD_EC_DATA	0x00	/* data register */
+#define AMD_EC_SC	0x04	/* status of controller */
+#define AMD_EC_CMD	0x04	/* command register */
+#define AMD_EC_ICR	0x08	/* interrupt control register */
+
+#define AMD_EC_SC_SMI	0x04	/* smi event pending */
+#define AMD_EC_SC_SCI	0x02	/* sci event pending */
+#define AMD_EC_SC_BURST	0x01	/* burst mode enabled */
+#define AMD_EC_SC_CMD	0x08	/* byte in data reg is command */
+#define AMD_EC_SC_IBF	0x02	/* data ready for embedded controller */
+#define AMD_EC_SC_OBF	0x01	/* data ready for host */
+
+#define AMD_EC_CMD_RD	0x80	/* read EC */
+#define AMD_EC_CMD_WR	0x81	/* write EC */
+#define AMD_EC_CMD_BE	0x82	/* enable burst mode */
+#define AMD_EC_CMD_BD	0x83	/* disable burst mode */
+#define AMD_EC_CMD_QR	0x84	/* query EC */
+
+/*
+ * ACPI 2.0 chapter 13 access of registers of the EC
+ */
+
+static int amd_ec_wait_write(struct amd_smbus *smbus)
+{
+	int timeout = 500;
+
+	while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout)
+		udelay(1);
+
+	if (!timeout) {
+		dev_warn(&smbus->dev->dev,
+			 "Timeout while waiting for IBF to clear\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int amd_ec_wait_read(struct amd_smbus *smbus)
+{
+	int timeout = 500;
+
+	while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout)
+		udelay(1);
+
+	if (!timeout) {
+		dev_warn(&smbus->dev->dev,
+			 "Timeout while waiting for OBF to set\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
+		unsigned char *data)
+{
+	int status;
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
+	outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD);
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
+	outb(address, smbus->base + AMD_EC_DATA);
+
+	status = amd_ec_wait_read(smbus);
+	if (status)
+		return status;
+	*data = inb(smbus->base + AMD_EC_DATA);
+
+	return 0;
+}
+
+static int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
+		unsigned char data)
+{
+	int status;
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
+	outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD);
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
+	outb(address, smbus->base + AMD_EC_DATA);
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
+	outb(data, smbus->base + AMD_EC_DATA);
+
+	return 0;
+}
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+
+#define AMD_SMB_PRTCL	0x00	/* protocol, PEC */
+#define AMD_SMB_STS	0x01	/* status */
+#define AMD_SMB_ADDR	0x02	/* address */
+#define AMD_SMB_CMD	0x03	/* command */
+#define AMD_SMB_DATA	0x04	/* 32 data registers */
+#define AMD_SMB_BCNT	0x24	/* number of data bytes */
+#define AMD_SMB_ALRM_A	0x25	/* alarm address */
+#define AMD_SMB_ALRM_D	0x26	/* 2 bytes alarm data */
+
+#define AMD_SMB_STS_DONE	0x80
+#define AMD_SMB_STS_ALRM	0x40
+#define AMD_SMB_STS_RES		0x20
+#define AMD_SMB_STS_STATUS	0x1f
+
+#define AMD_SMB_STATUS_OK	0x00
+#define AMD_SMB_STATUS_FAIL	0x07
+#define AMD_SMB_STATUS_DNAK	0x10
+#define AMD_SMB_STATUS_DERR	0x11
+#define AMD_SMB_STATUS_CMD_DENY	0x12
+#define AMD_SMB_STATUS_UNKNOWN	0x13
+#define AMD_SMB_STATUS_ACC_DENY	0x17
+#define AMD_SMB_STATUS_TIMEOUT	0x18
+#define AMD_SMB_STATUS_NOTSUP	0x19
+#define AMD_SMB_STATUS_BUSY	0x1A
+#define AMD_SMB_STATUS_PEC	0x1F
+
+#define AMD_SMB_PRTCL_WRITE		0x00
+#define AMD_SMB_PRTCL_READ		0x01
+#define AMD_SMB_PRTCL_QUICK		0x02
+#define AMD_SMB_PRTCL_BYTE		0x04
+#define AMD_SMB_PRTCL_BYTE_DATA		0x06
+#define AMD_SMB_PRTCL_WORD_DATA		0x08
+#define AMD_SMB_PRTCL_BLOCK_DATA	0x0a
+#define AMD_SMB_PRTCL_PROC_CALL		0x0c
+#define AMD_SMB_PRTCL_BLOCK_PROC_CALL	0x0d
+#define AMD_SMB_PRTCL_I2C_BLOCK_DATA	0x4a
+#define AMD_SMB_PRTCL_PEC		0x80
+
+
+static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
+		unsigned short flags, char read_write, u8 command, int size,
+		union i2c_smbus_data * data)
+{
+	struct amd_smbus *smbus = adap->algo_data;
+	unsigned char protocol, len, pec, temp[2];
+	int i, status;
+
+	protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ
+						  : AMD_SMB_PRTCL_WRITE;
+	pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+		case I2C_SMBUS_QUICK:
+			protocol |= AMD_SMB_PRTCL_QUICK;
+			read_write = I2C_SMBUS_WRITE;
+			break;
+
+		case I2C_SMBUS_BYTE:
+			if (read_write == I2C_SMBUS_WRITE) {
+				status = amd_ec_write(smbus, AMD_SMB_CMD,
+						      command);
+				if (status)
+					return status;
+			}
+			protocol |= AMD_SMB_PRTCL_BYTE;
+			break;
+
+		case I2C_SMBUS_BYTE_DATA:
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			if (read_write == I2C_SMBUS_WRITE) {
+				status = amd_ec_write(smbus, AMD_SMB_DATA,
+						      data->byte);
+				if (status)
+					return status;
+			}
+			protocol |= AMD_SMB_PRTCL_BYTE_DATA;
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			if (read_write == I2C_SMBUS_WRITE) {
+				status = amd_ec_write(smbus, AMD_SMB_DATA,
+						      data->word & 0xff);
+				if (status)
+					return status;
+				status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
+						      data->word >> 8);
+				if (status)
+					return status;
+			}
+			protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			if (read_write == I2C_SMBUS_WRITE) {
+				len = min_t(u8, data->block[0],
+					    I2C_SMBUS_BLOCK_MAX);
+				status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
+				if (status)
+					return status;
+				for (i = 0; i < len; i++) {
+					status =
+					  amd_ec_write(smbus, AMD_SMB_DATA + i,
+						       data->block[i + 1]);
+					if (status)
+						return status;
+				}
+			}
+			protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
+			break;
+
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			len = min_t(u8, data->block[0],
+				    I2C_SMBUS_BLOCK_MAX);
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
+			if (status)
+				return status;
+			if (read_write == I2C_SMBUS_WRITE)
+				for (i = 0; i < len; i++) {
+					status =
+					  amd_ec_write(smbus, AMD_SMB_DATA + i,
+						       data->block[i + 1]);
+					if (status)
+						return status;
+				}
+			protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
+			break;
+
+		case I2C_SMBUS_PROC_CALL:
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			status = amd_ec_write(smbus, AMD_SMB_DATA,
+					      data->word & 0xff);
+			if (status)
+				return status;
+			status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
+					      data->word >> 8);
+			if (status)
+				return status;
+			protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			len = min_t(u8, data->block[0],
+				    I2C_SMBUS_BLOCK_MAX - 1);
+			status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (status)
+				return status;
+			status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
+			if (status)
+				return status;
+			for (i = 0; i < len; i++) {
+				status = amd_ec_write(smbus, AMD_SMB_DATA + i,
+						      data->block[i + 1]);
+				if (status)
+					return status;
+			}
+			protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+
+		default:
+			dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+			return -EOPNOTSUPP;
+	}
+
+	status = amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
+	if (status)
+		return status;
+	status = amd_ec_write(smbus, AMD_SMB_PRTCL, protocol);
+	if (status)
+		return status;
+
+	status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+	if (status)
+		return status;
+
+	if (~temp[0] & AMD_SMB_STS_DONE) {
+		udelay(500);
+		status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+		if (status)
+			return status;
+	}
+
+	if (~temp[0] & AMD_SMB_STS_DONE) {
+		msleep(1);
+		status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+		if (status)
+			return status;
+	}
+
+	if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS))
+		return -EIO;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			status = amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
+			if (status)
+				return status;
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			status = amd_ec_read(smbus, AMD_SMB_DATA, temp + 0);
+			if (status)
+				return status;
+			status = amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1);
+			if (status)
+				return status;
+			data->word = (temp[1] << 8) | temp[0];
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			status = amd_ec_read(smbus, AMD_SMB_BCNT, &len);
+			if (status)
+				return status;
+			len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < len; i++) {
+				status = amd_ec_read(smbus, AMD_SMB_DATA + i,
+						     data->block + i + 1);
+				if (status)
+					return status;
+			}
+			data->block[0] = len;
+			break;
+	}
+
+	return 0;
+}
+
+
+static u32 amd8111_func(struct i2c_adapter *adapter)
+{
+	return	I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_PEC;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer = amd8111_access,
+	.functionality = amd8111_func,
+};
+
+
+static const struct pci_device_id amd8111_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, amd8111_ids);
+
+static int amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct amd_smbus *smbus;
+	int error;
+
+	if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
+		return -ENODEV;
+
+	smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+	if (!smbus)
+		return -ENOMEM;
+
+	smbus->dev = dev;
+	smbus->base = pci_resource_start(dev, 0);
+	smbus->size = pci_resource_len(dev, 0);
+
+	error = acpi_check_resource_conflict(&dev->resource[0]);
+	if (error) {
+		error = -ENODEV;
+		goto out_kfree;
+	}
+
+	if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
+		error = -EBUSY;
+		goto out_kfree;
+	}
+
+	smbus->adapter.owner = THIS_MODULE;
+	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
+		"SMBus2 AMD8111 adapter at %04x", smbus->base);
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	smbus->adapter.algo = &smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+
+	/* set up the sysfs linkage to our parent device */
+	smbus->adapter.dev.parent = &dev->dev;
+
+	pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0);
+	error = i2c_add_adapter(&smbus->adapter);
+	if (error)
+		goto out_release_region;
+
+	pci_set_drvdata(dev, smbus);
+	return 0;
+
+ out_release_region:
+	release_region(smbus->base, smbus->size);
+ out_kfree:
+	kfree(smbus);
+	return error;
+}
+
+static void amd8111_remove(struct pci_dev *dev)
+{
+	struct amd_smbus *smbus = pci_get_drvdata(dev);
+
+	i2c_del_adapter(&smbus->adapter);
+	release_region(smbus->base, smbus->size);
+	kfree(smbus);
+}
+
+static struct pci_driver amd8111_driver = {
+	.name		= "amd8111_smbus2",
+	.id_table	= amd8111_ids,
+	.probe		= amd8111_probe,
+	.remove		= amd8111_remove,
+};
+
+module_pci_driver(amd8111_driver);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-aspeed.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 0000000..29574b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,962 @@
+/*
+ *  Aspeed 24XX/25XX I2C Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG				0x00
+#define ASPEED_I2C_AC_TIMING_REG1			0x04
+#define ASPEED_I2C_AC_TIMING_REG2			0x08
+#define ASPEED_I2C_INTR_CTRL_REG			0x0c
+#define ASPEED_I2C_INTR_STS_REG				0x10
+#define ASPEED_I2C_CMD_REG				0x14
+#define ASPEED_I2C_DEV_ADDR_REG				0x18
+#define ASPEED_I2C_BYTE_BUF_REG				0x20
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register  */
+/* 0x08 : I2C Interrupt Target Assignment  */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register  */
+#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_SLAVE_EN				BIT(1)
+#define ASPEED_I2CD_MASTER_EN				BIT(0)
+
+/* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_TBUF_MASK			GENMASK(31, 28)
+#define ASPEED_I2CD_TIME_THDSTA_MASK			GENMASK(27, 24)
+#define ASPEED_I2CD_TIME_TACST_MASK			GENMASK(23, 20)
+#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT			16
+#define ASPEED_I2CD_TIME_SCL_HIGH_MASK			GENMASK(19, 16)
+#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT			12
+#define ASPEED_I2CD_TIME_SCL_LOW_MASK			GENMASK(15, 12)
+#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK		GENMASK(3, 0)
+#define ASPEED_I2CD_TIME_SCL_REG_MAX			GENMASK(3, 0)
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL				0
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+#define ASPEED_I2CD_INTR_ALL						       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_BUS_RECOVER_DONE |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_NORMAL_STOP |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS |				       \
+		 ASPEED_I2CD_INTR_RX_DONE |				       \
+		 ASPEED_I2CD_INTR_TX_NAK |				       \
+		 ASPEED_I2CD_INTR_TX_ACK)
+
+/* 0x14 : I2CD Command/Status Register   */
+#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
+#define ASPEED_I2CD_M_RX_CMD				BIT(3)
+#define ASPEED_I2CD_S_TX_CMD				BIT(2)
+#define ASPEED_I2CD_M_TX_CMD				BIT(1)
+#define ASPEED_I2CD_M_START_CMD				BIT(0)
+
+/* 0x18 : I2CD Slave Device Address Register   */
+#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
+
+enum aspeed_i2c_master_state {
+	ASPEED_I2C_MASTER_INACTIVE,
+	ASPEED_I2C_MASTER_START,
+	ASPEED_I2C_MASTER_TX_FIRST,
+	ASPEED_I2C_MASTER_TX,
+	ASPEED_I2C_MASTER_RX_FIRST,
+	ASPEED_I2C_MASTER_RX,
+	ASPEED_I2C_MASTER_STOP,
+};
+
+enum aspeed_i2c_slave_state {
+	ASPEED_I2C_SLAVE_STOP,
+	ASPEED_I2C_SLAVE_START,
+	ASPEED_I2C_SLAVE_READ_REQUESTED,
+	ASPEED_I2C_SLAVE_READ_PROCESSED,
+	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+};
+
+struct aspeed_i2c_bus {
+	struct i2c_adapter		adap;
+	struct device			*dev;
+	void __iomem			*base;
+	/* Synchronizes I/O mem access to base. */
+	spinlock_t			lock;
+	struct completion		cmd_complete;
+	u32				(*get_clk_reg_val)(struct device *dev,
+							   u32 divisor);
+	unsigned long			parent_clk_frequency;
+	u32				bus_frequency;
+	/* Transaction state. */
+	enum aspeed_i2c_master_state	master_state;
+	struct i2c_msg			*msgs;
+	size_t				buf_index;
+	size_t				msgs_index;
+	size_t				msgs_count;
+	bool				send_stop;
+	int				cmd_err;
+	/* Protected only by i2c_lock_bus */
+	int				master_xfer_result;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct i2c_client		*slave;
+	enum aspeed_i2c_slave_state	slave_state;
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+
+static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+	unsigned long time_left, flags;
+	int ret = 0;
+	u32 command;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+
+	if (command & ASPEED_I2CD_SDA_LINE_STS) {
+		/* Bus is idle: no recovery needed. */
+		if (command & ASPEED_I2CD_SCL_LINE_STS)
+			goto out;
+		dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SCL_LINE_STS))
+			goto reset_out;
+	/* Bus error. */
+	} else {
+		dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		/* Writes 1 to 8 SCL clock cycles until SDA is released. */
+		writel(ASPEED_I2CD_BUS_RECOVER_CMD,
+		       bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SDA_LINE_STS))
+			goto reset_out;
+	}
+
+out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+
+reset_out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return aspeed_i2c_reset(bus);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 command, irq_status, status_ack = 0;
+	struct i2c_client *slave = bus->slave;
+	bool irq_handled = true;
+	u8 value;
+
+	spin_lock(&bus->lock);
+	if (!slave) {
+		irq_handled = false;
+		goto out;
+	}
+
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	/* Slave was requested, restart state machine. */
+	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+		bus->slave_state = ASPEED_I2C_SLAVE_START;
+	}
+
+	/* Slave is not currently active, irq was for someone else. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		irq_handled = false;
+		goto out;
+	}
+
+	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+		irq_status, command);
+
+	/* Slave was sent something. */
+	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+		value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		/* Handle address frame. */
+		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+			if (value & 0x1)
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_READ_REQUESTED;
+			else
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+	}
+
+	/* Slave was asked to stop. */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
+		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	switch (bus->slave_state) {
+	case ASPEED_I2C_SLAVE_READ_REQUESTED:
+		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+			dev_err(bus->dev, "Unexpected ACK on read request.\n");
+		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_READ_PROCESSED:
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+			dev_err(bus->dev,
+				"Expected ACK after processed read.\n");
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
+		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_STOP:
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_err(bus->dev, "unhandled slave_state: %d\n",
+			bus->slave_state);
+		break;
+	}
+
+	if (status_ack != irq_status)
+		dev_err(bus->dev,
+			"irq handled != irq. expected %x, but was %x\n",
+			irq_status, status_ack);
+	writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+out:
+	spin_unlock(&bus->lock);
+	return irq_handled;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
+{
+	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
+	u8 slave_addr = msg->addr << 1;
+
+	bus->master_state = ASPEED_I2C_MASTER_START;
+	bus->buf_index = 0;
+
+	if (msg->flags & I2C_M_RD) {
+		slave_addr |= 1;
+		command |= ASPEED_I2CD_M_RX_CMD;
+		/* Need to let the hardware know to NACK after RX. */
+		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+	}
+
+	writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+	writel(command, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
+{
+	bus->master_state = ASPEED_I2C_MASTER_STOP;
+	writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
+{
+	if (bus->msgs_index + 1 < bus->msgs_count) {
+		bus->msgs_index++;
+		aspeed_i2c_do_start(bus);
+	} else {
+		aspeed_i2c_do_stop(bus);
+	}
+}
+
+static int aspeed_i2c_is_irq_error(u32 irq_status)
+{
+	if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
+		return -EAGAIN;
+	if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+			  ASPEED_I2CD_INTR_SCL_TIMEOUT))
+		return -EBUSY;
+	if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
+		return -EPROTO;
+
+	return 0;
+}
+
+static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 irq_status, status_ack = 0, command = 0;
+	struct i2c_msg *msg;
+	u8 recv_byte;
+	int ret;
+
+	spin_lock(&bus->lock);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	/* Ack all interrupt bits. */
+	writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+		goto out_complete;
+	}
+
+	/*
+	 * We encountered an interrupt that reports an error: the hardware
+	 * should clear the command queue effectively taking us back to the
+	 * INACTIVE state.
+	 */
+	ret = aspeed_i2c_is_irq_error(irq_status);
+	if (ret < 0) {
+		dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+			irq_status);
+		bus->cmd_err = ret;
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	}
+
+	/* We are in an invalid state; reset bus to a known state. */
+	if (!bus->msgs) {
+		dev_err(bus->dev, "bus in unknown state");
+		bus->cmd_err = -EIO;
+		if (bus->master_state != ASPEED_I2C_MASTER_STOP)
+			aspeed_i2c_do_stop(bus);
+		goto out_no_complete;
+	}
+	msg = &bus->msgs[bus->msgs_index];
+
+	/*
+	 * START is a special case because we still have to handle a subsequent
+	 * TX or RX immediately after we handle it, so we handle it here and
+	 * then update the state and handle the new state below.
+	 */
+	if (bus->master_state == ASPEED_I2C_MASTER_START) {
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			pr_devel("no slave present at %02x", msg->addr);
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			bus->cmd_err = -ENXIO;
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (msg->len == 0) { /* SMBUS_QUICK */
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		if (msg->flags & I2C_M_RD)
+			bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
+		else
+			bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
+	}
+
+	switch (bus->master_state) {
+	case ASPEED_I2C_MASTER_TX:
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
+			dev_dbg(bus->dev, "slave NACKed TX");
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			goto error_and_stop;
+		} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_err(bus->dev, "slave failed to ACK TX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_TX_FIRST:
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_TX;
+			writel(msg->buf[bus->buf_index++],
+			       bus->base + ASPEED_I2C_BYTE_BUF_REG);
+			writel(ASPEED_I2CD_M_TX_CMD,
+			       bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_RX_FIRST:
+		/* RX may not have completed yet (only address cycle) */
+		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
+			goto out_no_complete;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_RX:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
+			dev_err(bus->dev, "master failed to RX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+
+		recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		msg->buf[bus->buf_index++] = recv_byte;
+
+		if (msg->flags & I2C_M_RECV_LEN) {
+			if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
+				bus->cmd_err = -EPROTO;
+				aspeed_i2c_do_stop(bus);
+				goto out_no_complete;
+			}
+			msg->len = recv_byte +
+					((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+			msg->flags &= ~I2C_M_RECV_LEN;
+		}
+
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_RX;
+			command = ASPEED_I2CD_M_RX_CMD;
+			if (bus->buf_index + 1 == msg->len)
+				command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+			writel(command, bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_STOP:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
+			dev_err(bus->dev, "master failed to STOP");
+			bus->cmd_err = -EIO;
+			/* Do not STOP as we have already tried. */
+		} else {
+			status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		}
+
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	case ASPEED_I2C_MASTER_INACTIVE:
+		dev_err(bus->dev,
+			"master received interrupt 0x%08x, but is inactive",
+			irq_status);
+		bus->cmd_err = -EIO;
+		/* Do not STOP as we should be inactive. */
+		goto out_complete;
+	default:
+		WARN(1, "unknown master state\n");
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		bus->cmd_err = -EINVAL;
+		goto out_complete;
+	}
+error_and_stop:
+	bus->cmd_err = -EIO;
+	aspeed_i2c_do_stop(bus);
+	goto out_no_complete;
+out_complete:
+	bus->msgs = NULL;
+	if (bus->cmd_err)
+		bus->master_xfer_result = bus->cmd_err;
+	else
+		bus->master_xfer_result = bus->msgs_index + 1;
+	complete(&bus->cmd_complete);
+out_no_complete:
+	if (irq_status != status_ack)
+		dev_err(bus->dev,
+			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+			irq_status, status_ack);
+	spin_unlock(&bus->lock);
+	return !!irq_status;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct aspeed_i2c_bus *bus = dev_id;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (aspeed_i2c_slave_irq(bus)) {
+		dev_dbg(bus->dev, "irq handled by slave.\n");
+		return IRQ_HANDLED;
+	}
+#endif /* CONFIG_I2C_SLAVE */
+
+	return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+	unsigned long time_left, flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->cmd_err = 0;
+
+	/* If bus is busy, attempt recovery. We assume a single master
+	 * environment.
+	 */
+	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&bus->lock, flags);
+	}
+
+	bus->cmd_err = 0;
+	bus->msgs = msgs;
+	bus->msgs_index = 0;
+	bus->msgs_count = num;
+
+	reinit_completion(&bus->cmd_complete);
+	aspeed_i2c_do_start(bus);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_timeout(&bus->cmd_complete,
+						bus->adap.timeout);
+
+	if (time_left == 0)
+		return -ETIMEDOUT;
+	else
+		return bus->master_xfer_result;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/* precondition: bus.lock has been acquired. */
+static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
+{
+	u32 addr_reg_val, func_ctrl_reg_val;
+
+	/* Set slave addr. */
+	addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
+	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+	addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
+	writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
+
+	/* Turn on slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+}
+
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	__aspeed_i2c_reg_slave(bus, client->addr);
+
+	bus->slave = client;
+	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	u32 func_ctrl_reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Turn off slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+	.master_xfer	= aspeed_i2c_master_xfer,
+	.functionality	= aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= aspeed_i2c_reg_slave,
+	.unreg_slave	= aspeed_i2c_unreg_slave,
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
+				      u32 clk_high_low_mask,
+				      u32 divisor)
+{
+	u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
+
+	/*
+	 * SCL_high and SCL_low represent a value 1 greater than what is stored
+	 * since a zero divider is meaningless. Thus, the max value each can
+	 * store is every bit set + 1. Since SCL_high and SCL_low are added
+	 * together (see below), the max value of both is the max value of one
+	 * them times two.
+	 */
+	clk_high_low_max = (clk_high_low_mask + 1) * 2;
+
+	/*
+	 * The actual clock frequency of SCL is:
+	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
+	 *		 = APB_freq / divisor
+	 * where base_freq is a programmable clock divider; its value is
+	 *	base_freq = 1 << base_clk_divisor
+	 * SCL_high is the number of base_freq clock cycles that SCL stays high
+	 * and SCL_low is the number of base_freq clock cycles that SCL stays
+	 * low for a period of SCL.
+	 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
+	 * thus, they start counting at zero. So
+	 *	SCL_high = clk_high + 1
+	 *	SCL_low	 = clk_low + 1
+	 * Thus,
+	 *	SCL_freq = APB_freq /
+	 *		((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
+	 * The documentation recommends clk_high >= clk_high_max / 2 and
+	 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
+	 * gives us the following solution:
+	 */
+	base_clk_divisor = divisor > clk_high_low_max ?
+			ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
+
+	if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
+		base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
+		clk_low = clk_high_low_mask;
+		clk_high = clk_high_low_mask;
+		dev_err(dev,
+			"clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
+			divisor, (1 << base_clk_divisor) * clk_high_low_max);
+	} else {
+		tmp = (divisor + (1 << base_clk_divisor) - 1)
+				>> base_clk_divisor;
+		clk_low = tmp / 2;
+		clk_high = tmp - clk_low;
+
+		if (clk_high)
+			clk_high--;
+
+		if (clk_low)
+			clk_low--;
+	}
+
+
+	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
+		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
+			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
+			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
+			| (base_clk_divisor
+			   & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+}
+
+static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 3 bits wide, so each can hold a max
+	 * value of 8 giving a clk_high_low_max of 16.
+	 */
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
+}
+
+static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 4 bits wide, so each can hold a max
+	 * value of 16 giving a clk_high_low_max of 32.
+	 */
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
+{
+	u32 divisor, clk_reg_val;
+
+	divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
+	clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
+			ASPEED_I2CD_TIME_THDSTA_MASK |
+			ASPEED_I2CD_TIME_TACST_MASK);
+	clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
+	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
+
+	return 0;
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
+			     struct platform_device *pdev)
+{
+	u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
+	int ret;
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	ret = aspeed_i2c_init_clk(bus);
+	if (ret < 0)
+		return ret;
+
+	if (!of_property_read_bool(pdev->dev.of_node, "multi-master"))
+		fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
+
+	/* Enable Master Mode */
+	writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
+	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* If slave has already been registered, re-enable it. */
+	if (bus->slave)
+		__aspeed_i2c_reg_slave(bus, bus->slave->addr);
+#endif /* CONFIG_I2C_SLAVE */
+
+	/* Set interrupt generation of I2C controller */
+	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	return 0;
+}
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
+{
+	struct platform_device *pdev = to_platform_device(bus->dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable and ack all interrupts. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	ret = aspeed_i2c_init(bus, pdev);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{
+		.compatible = "aspeed,ast2400-i2c-bus",
+		.data = aspeed_i2c_24xx_get_clk_reg_val,
+	},
+	{
+		.compatible = "aspeed,ast2500-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct aspeed_i2c_bus *bus;
+	struct clk *parent_clk;
+	struct resource *res;
+	int irq, ret;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bus->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(bus->base))
+		return PTR_ERR(bus->base);
+
+	parent_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(parent_clk))
+		return PTR_ERR(parent_clk);
+	bus->parent_clk_frequency = clk_get_rate(parent_clk);
+	/* We just need the clock rate, we don't actually use the clk object. */
+	devm_clk_put(&pdev->dev, parent_clk);
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "bus-frequency", &bus->bus_frequency);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Could not read bus-frequency property\n");
+		bus->bus_frequency = 100000;
+	}
+
+	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
+	if (!match)
+		bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
+	else
+		bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
+				match->data;
+
+	/* Initialize the I2C adapter */
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+	bus->adap.owner = THIS_MODULE;
+	bus->adap.retries = 0;
+	bus->adap.timeout = 5 * HZ;
+	bus->adap.algo = &aspeed_i2c_algo;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = pdev->dev.of_node;
+	strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
+	i2c_set_adapdata(&bus->adap, bus);
+
+	bus->dev = &pdev->dev;
+
+	/* Clean up any left over interrupt state. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+	/*
+	 * bus.lock does not need to be held because the interrupt handler has
+	 * not been enabled yet.
+	 */
+	ret = aspeed_i2c_init(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
+			       0, dev_name(&pdev->dev), bus);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&bus->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+
+	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+		 bus->adap.nr, irq);
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+	.probe		= aspeed_i2c_probe_bus,
+	.remove		= aspeed_i2c_remove_bus,
+	.driver		= {
+		.name		= "aspeed-i2c-bus",
+		.of_match_table	= aspeed_i2c_bus_of_table,
+	},
+};
+module_platform_driver(aspeed_i2c_bus_driver);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-at91.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-at91.c
new file mode 100644
index 0000000..bfd1fdf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-at91.c
@@ -0,0 +1,1243 @@
+/*
+ *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ *  Copyright (C) 2011 Weinmann Medical GmbH
+ *  Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ *  Evolved from original work by:
+ *  Copyright (C) 2004 Rick Bronson
+ *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ *  Borrowed heavily from original work by:
+ *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
+#define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
+#define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
+#define AUTOSUSPEND_TIMEOUT		2000
+#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE	256
+
+/* AT91 TWI register definitions */
+#define	AT91_TWI_CR		0x0000	/* Control Register */
+#define	AT91_TWI_START		BIT(0)	/* Send a Start Condition */
+#define	AT91_TWI_STOP		BIT(1)	/* Send a Stop Condition */
+#define	AT91_TWI_MSEN		BIT(2)	/* Master Transfer Enable */
+#define	AT91_TWI_MSDIS		BIT(3)	/* Master Transfer Disable */
+#define	AT91_TWI_SVEN		BIT(4)	/* Slave Transfer Enable */
+#define	AT91_TWI_SVDIS		BIT(5)	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		BIT(6)	/* SMBus quick command */
+#define	AT91_TWI_SWRST		BIT(7)	/* Software Reset */
+#define	AT91_TWI_ACMEN		BIT(16) /* Alternative Command Mode Enable */
+#define	AT91_TWI_ACMDIS		BIT(17) /* Alternative Command Mode Disable */
+#define	AT91_TWI_THRCLR		BIT(24) /* Transmit Holding Register Clear */
+#define	AT91_TWI_RHRCLR		BIT(25) /* Receive Holding Register Clear */
+#define	AT91_TWI_LOCKCLR	BIT(26) /* Lock Clear */
+#define	AT91_TWI_FIFOEN		BIT(28) /* FIFO Enable */
+#define	AT91_TWI_FIFODIS	BIT(29) /* FIFO Disable */
+
+#define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
+#define	AT91_TWI_IADRSZ_1	0x0100	/* Internal Device Address Size */
+#define	AT91_TWI_MREAD		BIT(12)	/* Master Read Direction */
+
+#define	AT91_TWI_IADR		0x000c	/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x0010	/* Clock Waveform Generator Reg */
+#define	AT91_TWI_CWGR_HOLD_MAX	0x1f
+#define	AT91_TWI_CWGR_HOLD(x)	(((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
+
+#define	AT91_TWI_SR		0x0020	/* Status Register */
+#define	AT91_TWI_TXCOMP		BIT(0)	/* Transmission Complete */
+#define	AT91_TWI_RXRDY		BIT(1)	/* Receive Holding Register Ready */
+#define	AT91_TWI_TXRDY		BIT(2)	/* Transmit Holding Register Ready */
+#define	AT91_TWI_OVRE		BIT(6)	/* Overrun Error */
+#define	AT91_TWI_UNRE		BIT(7)	/* Underrun Error */
+#define	AT91_TWI_NACK		BIT(8)	/* Not Acknowledged */
+#define	AT91_TWI_LOCK		BIT(23) /* TWI Lock due to Frame Errors */
+
+#define	AT91_TWI_INT_MASK \
+	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
+
+#define	AT91_TWI_IER		0x0024	/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x0028	/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x002c	/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x0030	/* Receive Holding Register */
+#define	AT91_TWI_THR		0x0034	/* Transmit Holding Register */
+
+#define	AT91_TWI_ACR		0x0040	/* Alternative Command Register */
+#define	AT91_TWI_ACR_DATAL(len)	((len) & 0xff)
+#define	AT91_TWI_ACR_DIR	BIT(8)
+
+#define	AT91_TWI_FMR		0x0050	/* FIFO Mode Register */
+#define	AT91_TWI_FMR_TXRDYM(mode)	(((mode) & 0x3) << 0)
+#define	AT91_TWI_FMR_TXRDYM_MASK	(0x3 << 0)
+#define	AT91_TWI_FMR_RXRDYM(mode)	(((mode) & 0x3) << 4)
+#define	AT91_TWI_FMR_RXRDYM_MASK	(0x3 << 4)
+#define	AT91_TWI_ONE_DATA	0x0
+#define	AT91_TWI_TWO_DATA	0x1
+#define	AT91_TWI_FOUR_DATA	0x2
+
+#define	AT91_TWI_FLR		0x0054	/* FIFO Level Register */
+
+#define	AT91_TWI_FSR		0x0060	/* FIFO Status Register */
+#define	AT91_TWI_FIER		0x0064	/* FIFO Interrupt Enable Register */
+#define	AT91_TWI_FIDR		0x0068	/* FIFO Interrupt Disable Register */
+#define	AT91_TWI_FIMR		0x006c	/* FIFO Interrupt Mask Register */
+
+#define	AT91_TWI_VER		0x00fc	/* Version Register */
+
+struct at91_twi_pdata {
+	unsigned clk_max_div;
+	unsigned clk_offset;
+	bool has_unre_flag;
+	bool has_alt_cmd;
+	bool has_hold_field;
+	struct at_dma_slave dma_slave;
+};
+
+struct at91_twi_dma {
+	struct dma_chan *chan_rx;
+	struct dma_chan *chan_tx;
+	struct scatterlist sg[2];
+	struct dma_async_tx_descriptor *data_desc;
+	enum dma_data_direction direction;
+	bool buf_mapped;
+	bool xfer_in_progress;
+};
+
+struct at91_twi_dev {
+	struct device *dev;
+	void __iomem *base;
+	struct completion cmd_complete;
+	struct clk *clk;
+	u8 *buf;
+	size_t buf_len;
+	struct i2c_msg *msg;
+	int irq;
+	unsigned imr;
+	unsigned transfer_status;
+	struct i2c_adapter adapter;
+	unsigned twi_cwgr_reg;
+	struct at91_twi_pdata *pdata;
+	bool use_dma;
+	bool use_alt_cmd;
+	bool recv_len_abort;
+	u32 fifo_size;
+	struct at91_twi_dma dma;
+};
+
+static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
+{
+	return readl_relaxed(dev->base + reg);
+}
+
+static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
+{
+	writel_relaxed(val, dev->base + reg);
+}
+
+static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
+{
+	at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
+}
+
+static void at91_twi_irq_save(struct at91_twi_dev *dev)
+{
+	dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
+	at91_disable_twi_interrupts(dev);
+}
+
+static void at91_twi_irq_restore(struct at91_twi_dev *dev)
+{
+	at91_twi_write(dev, AT91_TWI_IER, dev->imr);
+}
+
+static void at91_init_twi_bus(struct at91_twi_dev *dev)
+{
+	at91_disable_twi_interrupts(dev);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
+	/* FIFO should be enabled immediately after the software reset */
+	if (dev->fifo_size)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
+	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
+	at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
+}
+
+/*
+ * Calculate symmetric clock as stated in datasheet:
+ * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
+ */
+static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
+{
+	int ckdiv, cdiv, div, hold = 0;
+	struct at91_twi_pdata *pdata = dev->pdata;
+	int offset = pdata->clk_offset;
+	int max_ckdiv = pdata->clk_max_div;
+	u32 twd_hold_time_ns = 0;
+
+	div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
+				       2 * twi_clk) - offset);
+	ckdiv = fls(div >> 8);
+	cdiv = div >> ckdiv;
+
+	if (ckdiv > max_ckdiv) {
+		dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
+			 ckdiv, max_ckdiv);
+		ckdiv = max_ckdiv;
+		cdiv = 255;
+	}
+
+	if (pdata->has_hold_field) {
+		of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
+				     &twd_hold_time_ns);
+
+		/*
+		 * hold time = HOLD + 3 x T_peripheral_clock
+		 * Use clk rate in kHz to prevent overflows when computing
+		 * hold.
+		 */
+		hold = DIV_ROUND_UP(twd_hold_time_ns
+				    * (clk_get_rate(dev->clk) / 1000), 1000000);
+		hold -= 3;
+		if (hold < 0)
+			hold = 0;
+		if (hold > AT91_TWI_CWGR_HOLD_MAX) {
+			dev_warn(dev->dev,
+				 "HOLD field set to its maximum value (%d instead of %d)\n",
+				 AT91_TWI_CWGR_HOLD_MAX, hold);
+			hold = AT91_TWI_CWGR_HOLD_MAX;
+		}
+	}
+
+	dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv
+			    | AT91_TWI_CWGR_HOLD(hold);
+
+	dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
+		cdiv, ckdiv, hold, twd_hold_time_ns);
+}
+
+static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
+{
+	struct at91_twi_dma *dma = &dev->dma;
+
+	at91_twi_irq_save(dev);
+
+	if (dma->xfer_in_progress) {
+		if (dma->direction == DMA_FROM_DEVICE)
+			dmaengine_terminate_all(dma->chan_rx);
+		else
+			dmaengine_terminate_all(dma->chan_tx);
+		dma->xfer_in_progress = false;
+	}
+	if (dma->buf_mapped) {
+		dma_unmap_single(dev->dev, sg_dma_address(&dma->sg[0]),
+				 dev->buf_len, dma->direction);
+		dma->buf_mapped = false;
+	}
+
+	at91_twi_irq_restore(dev);
+}
+
+static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
+{
+	if (!dev->buf_len)
+		return;
+
+	/* 8bit write works with and without FIFO */
+	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
+
+	/* send stop when last byte has been written */
+	if (--dev->buf_len == 0)
+		if (!dev->use_alt_cmd)
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
+
+	++dev->buf;
+}
+
+static void at91_twi_write_data_dma_callback(void *data)
+{
+	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+
+	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
+			 dev->buf_len, DMA_TO_DEVICE);
+
+	/*
+	 * When this callback is called, THR/TX FIFO is likely not to be empty
+	 * yet. So we have to wait for TXCOMP or NACK bits to be set into the
+	 * Status Register to be sure that the STOP bit has been sent and the
+	 * transfer is completed. The NACK interrupt has already been enabled,
+	 * we just have to enable TXCOMP one.
+	 */
+	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	if (!dev->use_alt_cmd)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+}
+
+static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
+{
+	dma_addr_t dma_addr;
+	struct dma_async_tx_descriptor *txdesc;
+	struct at91_twi_dma *dma = &dev->dma;
+	struct dma_chan *chan_tx = dma->chan_tx;
+	unsigned int sg_len = 1;
+
+	if (!dev->buf_len)
+		return;
+
+	dma->direction = DMA_TO_DEVICE;
+
+	at91_twi_irq_save(dev);
+	dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
+				  DMA_TO_DEVICE);
+	if (dma_mapping_error(dev->dev, dma_addr)) {
+		dev_err(dev->dev, "dma map failed\n");
+		return;
+	}
+	dma->buf_mapped = true;
+	at91_twi_irq_restore(dev);
+
+	if (dev->fifo_size) {
+		size_t part1_len, part2_len;
+		struct scatterlist *sg;
+		unsigned fifo_mr;
+
+		sg_len = 0;
+
+		part1_len = dev->buf_len & ~0x3;
+		if (part1_len) {
+			sg = &dma->sg[sg_len++];
+			sg_dma_len(sg) = part1_len;
+			sg_dma_address(sg) = dma_addr;
+		}
+
+		part2_len = dev->buf_len & 0x3;
+		if (part2_len) {
+			sg = &dma->sg[sg_len++];
+			sg_dma_len(sg) = part2_len;
+			sg_dma_address(sg) = dma_addr + part1_len;
+		}
+
+		/*
+		 * DMA controller is triggered when at least 4 data can be
+		 * written into the TX FIFO
+		 */
+		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+		fifo_mr &= ~AT91_TWI_FMR_TXRDYM_MASK;
+		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_FOUR_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+	} else {
+		sg_dma_len(&dma->sg[0]) = dev->buf_len;
+		sg_dma_address(&dma->sg[0]) = dma_addr;
+	}
+
+	txdesc = dmaengine_prep_slave_sg(chan_tx, dma->sg, sg_len,
+					 DMA_MEM_TO_DEV,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc) {
+		dev_err(dev->dev, "dma prep slave sg failed\n");
+		goto error;
+	}
+
+	txdesc->callback = at91_twi_write_data_dma_callback;
+	txdesc->callback_param = dev;
+
+	dma->xfer_in_progress = true;
+	dmaengine_submit(txdesc);
+	dma_async_issue_pending(chan_tx);
+
+	return;
+
+error:
+	at91_twi_dma_cleanup(dev);
+}
+
+static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
+{
+	/*
+	 * If we are in this case, it means there is garbage data in RHR, so
+	 * delete them.
+	 */
+	if (!dev->buf_len) {
+		at91_twi_read(dev, AT91_TWI_RHR);
+		return;
+	}
+
+	/* 8bit read works with and without FIFO */
+	*dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
+	--dev->buf_len;
+
+	/* return if aborting, we only needed to read RHR to clear RXRDY*/
+	if (dev->recv_len_abort)
+		return;
+
+	/* handle I2C_SMBUS_BLOCK_DATA */
+	if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
+		/* ensure length byte is a valid value */
+		if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+			dev->msg->flags &= ~I2C_M_RECV_LEN;
+			dev->buf_len += *dev->buf;
+			dev->msg->len = dev->buf_len + 1;
+			dev_dbg(dev->dev, "received block length %zu\n",
+					 dev->buf_len);
+		} else {
+			/* abort and send the stop by reading one more byte */
+			dev->recv_len_abort = true;
+			dev->buf_len = 1;
+		}
+	}
+
+	/* send stop if second but last byte has been read */
+	if (!dev->use_alt_cmd && dev->buf_len == 1)
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+	dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
+
+	++dev->buf;
+}
+
+static void at91_twi_read_data_dma_callback(void *data)
+{
+	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
+	unsigned ier = AT91_TWI_TXCOMP;
+
+	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
+			 dev->buf_len, DMA_FROM_DEVICE);
+
+	if (!dev->use_alt_cmd) {
+		/* The last two bytes have to be read without using dma */
+		dev->buf += dev->buf_len - 2;
+		dev->buf_len = 2;
+		ier |= AT91_TWI_RXRDY;
+	}
+	at91_twi_write(dev, AT91_TWI_IER, ier);
+}
+
+static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
+{
+	dma_addr_t dma_addr;
+	struct dma_async_tx_descriptor *rxdesc;
+	struct at91_twi_dma *dma = &dev->dma;
+	struct dma_chan *chan_rx = dma->chan_rx;
+	size_t buf_len;
+
+	buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
+	dma->direction = DMA_FROM_DEVICE;
+
+	/* Keep in mind that we won't use dma to read the last two bytes */
+	at91_twi_irq_save(dev);
+	dma_addr = dma_map_single(dev->dev, dev->buf, buf_len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev->dev, dma_addr)) {
+		dev_err(dev->dev, "dma map failed\n");
+		return;
+	}
+	dma->buf_mapped = true;
+	at91_twi_irq_restore(dev);
+
+	if (dev->fifo_size && IS_ALIGNED(buf_len, 4)) {
+		unsigned fifo_mr;
+
+		/*
+		 * DMA controller is triggered when at least 4 data can be
+		 * read from the RX FIFO
+		 */
+		fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+		fifo_mr &= ~AT91_TWI_FMR_RXRDYM_MASK;
+		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_FOUR_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+	}
+
+	sg_dma_len(&dma->sg[0]) = buf_len;
+	sg_dma_address(&dma->sg[0]) = dma_addr;
+
+	rxdesc = dmaengine_prep_slave_sg(chan_rx, dma->sg, 1, DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!rxdesc) {
+		dev_err(dev->dev, "dma prep slave sg failed\n");
+		goto error;
+	}
+
+	rxdesc->callback = at91_twi_read_data_dma_callback;
+	rxdesc->callback_param = dev;
+
+	dma->xfer_in_progress = true;
+	dmaengine_submit(rxdesc);
+	dma_async_issue_pending(dma->chan_rx);
+
+	return;
+
+error:
+	at91_twi_dma_cleanup(dev);
+}
+
+static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
+{
+	struct at91_twi_dev *dev = dev_id;
+	const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
+	const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
+
+	if (!irqstatus)
+		return IRQ_NONE;
+	/*
+	 * In reception, the behavior of the twi device (before sama5d2) is
+	 * weird. There is some magic about RXRDY flag! When a data has been
+	 * almost received, the reception of a new one is anticipated if there
+	 * is no stop command to send. That is the reason why ask for sending
+	 * the stop command not on the last data but on the second last one.
+	 *
+	 * Unfortunately, we could still have the RXRDY flag set even if the
+	 * transfer is done and we have read the last data. It might happen
+	 * when the i2c slave device sends too quickly data after receiving the
+	 * ack from the master. The data has been almost received before having
+	 * the order to send stop. In this case, sending the stop command could
+	 * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
+	 * the RXRDY interrupt first in order to not keep garbage data in the
+	 * Receive Holding Register for the next transfer.
+	 */
+	if (irqstatus & AT91_TWI_RXRDY)
+		at91_twi_read_next_byte(dev);
+
+	/*
+	 * When a NACK condition is detected, the I2C controller sets the NACK,
+	 * TXCOMP and TXRDY bits all together in the Status Register (SR).
+	 *
+	 * 1 - Handling NACK errors with CPU write transfer.
+	 *
+	 * In such case, we should not write the next byte into the Transmit
+	 * Holding Register (THR) otherwise the I2C controller would start a new
+	 * transfer and the I2C slave is likely to reply by another NACK.
+	 *
+	 * 2 - Handling NACK errors with DMA write transfer.
+	 *
+	 * By setting the TXRDY bit in the SR, the I2C controller also triggers
+	 * the DMA controller to write the next data into the THR. Then the
+	 * result depends on the hardware version of the I2C controller.
+	 *
+	 * 2a - Without support of the Alternative Command mode.
+	 *
+	 * This is the worst case: the DMA controller is triggered to write the
+	 * next data into the THR, hence starting a new transfer: the I2C slave
+	 * is likely to reply by another NACK.
+	 * Concurrently, this interrupt handler is likely to be called to manage
+	 * the first NACK before the I2C controller detects the second NACK and
+	 * sets once again the NACK bit into the SR.
+	 * When handling the first NACK, this interrupt handler disables the I2C
+	 * controller interruptions, especially the NACK interrupt.
+	 * Hence, the NACK bit is pending into the SR. This is why we should
+	 * read the SR to clear all pending interrupts at the beginning of
+	 * at91_do_twi_transfer() before actually starting a new transfer.
+	 *
+	 * 2b - With support of the Alternative Command mode.
+	 *
+	 * When a NACK condition is detected, the I2C controller also locks the
+	 * THR (and sets the LOCK bit in the SR): even though the DMA controller
+	 * is triggered by the TXRDY bit to write the next data into the THR,
+	 * this data actually won't go on the I2C bus hence a second NACK is not
+	 * generated.
+	 */
+	if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
+		at91_disable_twi_interrupts(dev);
+		complete(&dev->cmd_complete);
+	} else if (irqstatus & AT91_TWI_TXRDY) {
+		at91_twi_write_next_byte(dev);
+	}
+
+	/* catch error flags */
+	dev->transfer_status |= status;
+
+	return IRQ_HANDLED;
+}
+
+static int at91_do_twi_transfer(struct at91_twi_dev *dev)
+{
+	int ret;
+	unsigned long time_left;
+	bool has_unre_flag = dev->pdata->has_unre_flag;
+	bool has_alt_cmd = dev->pdata->has_alt_cmd;
+
+	/*
+	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
+	 * read flag but shows the state of the transmission at the time the
+	 * Status Register is read. According to the programmer datasheet,
+	 * TXCOMP is set when both holding register and internal shifter are
+	 * empty and STOP condition has been sent.
+	 * Consequently, we should enable NACK interrupt rather than TXCOMP to
+	 * detect transmission failure.
+	 * Indeed let's take the case of an i2c write command using DMA.
+	 * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and
+	 * TXCOMP bits are set together into the Status Register.
+	 * LOCK is a clear on write bit, which is set to prevent the DMA
+	 * controller from sending new data on the i2c bus after a NACK
+	 * condition has happened. Once locked, this i2c peripheral stops
+	 * triggering the DMA controller for new data but it is more than
+	 * likely that a new DMA transaction is already in progress, writing
+	 * into the Transmit Holding Register. Since the peripheral is locked,
+	 * these new data won't be sent to the i2c bus but they will remain
+	 * into the Transmit Holding Register, so TXCOMP bit is cleared.
+	 * Then when the interrupt handler is called, the Status Register is
+	 * read: the TXCOMP bit is clear but NACK bit is still set. The driver
+	 * manage the error properly, without waiting for timeout.
+	 * This case can be reproduced easyly when writing into an at24 eeprom.
+	 *
+	 * Besides, the TXCOMP bit is already set before the i2c transaction
+	 * has been started. For read transactions, this bit is cleared when
+	 * writing the START bit into the Control Register. So the
+	 * corresponding interrupt can safely be enabled just after.
+	 * However for write transactions managed by the CPU, we first write
+	 * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
+	 * interrupt. If TXCOMP interrupt were enabled before writing into THR,
+	 * the interrupt handler would be called immediately and the i2c command
+	 * would be reported as completed.
+	 * Also when a write transaction is managed by the DMA controller,
+	 * enabling the TXCOMP interrupt in this function may lead to a race
+	 * condition since we don't know whether the TXCOMP interrupt is enabled
+	 * before or after the DMA has started to write into THR. So the TXCOMP
+	 * interrupt is enabled later by at91_twi_write_data_dma_callback().
+	 * Immediately after in that DMA callback, if the alternative command
+	 * mode is not used, we still need to send the STOP condition manually
+	 * writing the corresponding bit into the Control Register.
+	 */
+
+	dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
+		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
+
+	reinit_completion(&dev->cmd_complete);
+	dev->transfer_status = 0;
+
+	/* Clear pending interrupts, such as NACK. */
+	at91_twi_read(dev, AT91_TWI_SR);
+
+	if (dev->fifo_size) {
+		unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
+
+		/* Reset FIFO mode register */
+		fifo_mr &= ~(AT91_TWI_FMR_TXRDYM_MASK |
+			     AT91_TWI_FMR_RXRDYM_MASK);
+		fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_ONE_DATA);
+		fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_ONE_DATA);
+		at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
+
+		/* Flush FIFOs */
+		at91_twi_write(dev, AT91_TWI_CR,
+			       AT91_TWI_THRCLR | AT91_TWI_RHRCLR);
+	}
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
+		unsigned start_flags = AT91_TWI_START;
+
+		/* if only one byte is to be read, immediately stop transfer */
+		if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
+		    !(dev->msg->flags & I2C_M_RECV_LEN))
+			start_flags |= AT91_TWI_STOP;
+		at91_twi_write(dev, AT91_TWI_CR, start_flags);
+		/*
+		 * When using dma without alternative command mode, the last
+		 * byte has to be read manually in order to not send the stop
+		 * command too late and then to receive extra data.
+		 * In practice, there are some issues if you use the dma to
+		 * read n-1 bytes because of latency.
+		 * Reading n-2 bytes with dma and the two last ones manually
+		 * seems to be the best solution.
+		 */
+		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
+			at91_twi_read_data_dma(dev);
+		} else {
+			at91_twi_write(dev, AT91_TWI_IER,
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_RXRDY);
+		}
+	} else {
+		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
+			at91_twi_write_data_dma(dev);
+		} else {
+			at91_twi_write_next_byte(dev);
+			at91_twi_write(dev, AT91_TWI_IER,
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_TXRDY);
+		}
+	}
+
+	time_left = wait_for_completion_timeout(&dev->cmd_complete,
+					      dev->adapter.timeout);
+	if (time_left == 0) {
+		dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
+		dev_err(dev->dev, "controller timed out\n");
+		at91_init_twi_bus(dev);
+		ret = -ETIMEDOUT;
+		goto error;
+	}
+	if (dev->transfer_status & AT91_TWI_NACK) {
+		dev_dbg(dev->dev, "received nack\n");
+		ret = -EREMOTEIO;
+		goto error;
+	}
+	if (dev->transfer_status & AT91_TWI_OVRE) {
+		dev_err(dev->dev, "overrun while reading\n");
+		ret = -EIO;
+		goto error;
+	}
+	if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
+		dev_err(dev->dev, "underrun while writing\n");
+		ret = -EIO;
+		goto error;
+	}
+	if ((has_alt_cmd || dev->fifo_size) &&
+	    (dev->transfer_status & AT91_TWI_LOCK)) {
+		dev_err(dev->dev, "tx locked\n");
+		ret = -EIO;
+		goto error;
+	}
+	if (dev->recv_len_abort) {
+		dev_err(dev->dev, "invalid smbus block length recvd\n");
+		ret = -EPROTO;
+		goto error;
+	}
+
+	dev_dbg(dev->dev, "transfer complete\n");
+
+	return 0;
+
+error:
+	/* first stop DMA transfer if still in progress */
+	at91_twi_dma_cleanup(dev);
+	/* then flush THR/FIFO and unlock TX if locked */
+	if ((has_alt_cmd || dev->fifo_size) &&
+	    (dev->transfer_status & AT91_TWI_LOCK)) {
+		dev_dbg(dev->dev, "unlock tx\n");
+		at91_twi_write(dev, AT91_TWI_CR,
+			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
+	}
+	return ret;
+}
+
+static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+	int ret;
+	unsigned int_addr_flag = 0;
+	struct i2c_msg *m_start = msg;
+	bool is_read;
+
+	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0)
+		goto out;
+
+	if (num == 2) {
+		int internal_address = 0;
+		int i;
+
+		/* 1st msg is put into the internal address, start with 2nd */
+		m_start = &msg[1];
+		for (i = 0; i < msg->len; ++i) {
+			const unsigned addr = msg->buf[msg->len - 1 - i];
+
+			internal_address |= addr << (8 * i);
+			int_addr_flag += AT91_TWI_IADRSZ_1;
+		}
+		at91_twi_write(dev, AT91_TWI_IADR, internal_address);
+	}
+
+	dev->use_alt_cmd = false;
+	is_read = (m_start->flags & I2C_M_RD);
+	if (dev->pdata->has_alt_cmd) {
+		if (m_start->len > 0 &&
+		    m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
+			at91_twi_write(dev, AT91_TWI_ACR,
+				       AT91_TWI_ACR_DATAL(m_start->len) |
+				       ((is_read) ? AT91_TWI_ACR_DIR : 0));
+			dev->use_alt_cmd = true;
+		} else {
+			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
+		}
+	}
+
+	at91_twi_write(dev, AT91_TWI_MMR,
+		       (m_start->addr << 16) |
+		       int_addr_flag |
+		       ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
+
+	dev->buf_len = m_start->len;
+	dev->buf = m_start->buf;
+	dev->msg = m_start;
+	dev->recv_len_abort = false;
+
+	ret = at91_do_twi_transfer(dev);
+
+	ret = (ret < 0) ? ret : num;
+out:
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
+	return ret;
+}
+
+/*
+ * The hardware can handle at most two messages concatenated by a
+ * repeated start via it's internal address feature.
+ */
+static const struct i2c_adapter_quirks at91_twi_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 3,
+};
+
+static u32 at91_twi_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm at91_twi_algorithm = {
+	.master_xfer	= at91_twi_xfer,
+	.functionality	= at91_twi_func,
+};
+
+static struct at91_twi_pdata at91rm9200_config = {
+	.clk_max_div = 5,
+	.clk_offset = 3,
+	.has_unre_flag = true,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9261_config = {
+	.clk_max_div = 5,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9260_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g20_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g10_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static const struct platform_device_id at91_twi_devtypes[] = {
+	{
+		.name = "i2c-at91rm9200",
+		.driver_data = (unsigned long) &at91rm9200_config,
+	}, {
+		.name = "i2c-at91sam9261",
+		.driver_data = (unsigned long) &at91sam9261_config,
+	}, {
+		.name = "i2c-at91sam9260",
+		.driver_data = (unsigned long) &at91sam9260_config,
+	}, {
+		.name = "i2c-at91sam9g20",
+		.driver_data = (unsigned long) &at91sam9g20_config,
+	}, {
+		.name = "i2c-at91sam9g10",
+		.driver_data = (unsigned long) &at91sam9g10_config,
+	}, {
+		/* sentinel */
+	}
+};
+
+#if defined(CONFIG_OF)
+static struct at91_twi_pdata at91sam9x5_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = false,
+};
+
+static struct at91_twi_pdata sama5d4_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = false,
+	.has_alt_cmd = false,
+	.has_hold_field = true,
+};
+
+static struct at91_twi_pdata sama5d2_config = {
+	.clk_max_div = 7,
+	.clk_offset = 4,
+	.has_unre_flag = true,
+	.has_alt_cmd = true,
+	.has_hold_field = true,
+};
+
+static const struct of_device_id atmel_twi_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-i2c",
+		.data = &at91rm9200_config,
+	} , {
+		.compatible = "atmel,at91sam9260-i2c",
+		.data = &at91sam9260_config,
+	} , {
+		.compatible = "atmel,at91sam9261-i2c",
+		.data = &at91sam9261_config,
+	} , {
+		.compatible = "atmel,at91sam9g20-i2c",
+		.data = &at91sam9g20_config,
+	} , {
+		.compatible = "atmel,at91sam9g10-i2c",
+		.data = &at91sam9g10_config,
+	}, {
+		.compatible = "atmel,at91sam9x5-i2c",
+		.data = &at91sam9x5_config,
+	}, {
+		.compatible = "atmel,sama5d4-i2c",
+		.data = &sama5d4_config,
+	}, {
+		.compatible = "atmel,sama5d2-i2c",
+		.data = &sama5d2_config,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
+#endif
+
+static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
+{
+	int ret = 0;
+	struct dma_slave_config slave_config;
+	struct at91_twi_dma *dma = &dev->dma;
+	enum dma_slave_buswidth addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+
+	/*
+	 * The actual width of the access will be chosen in
+	 * dmaengine_prep_slave_sg():
+	 * for each buffer in the scatter-gather list, if its size is aligned
+	 * to addr_width then addr_width accesses will be performed to transfer
+	 * the buffer. On the other hand, if the buffer size is not aligned to
+	 * addr_width then the buffer is transferred using single byte accesses.
+	 * Please refer to the Atmel eXtended DMA controller driver.
+	 * When FIFOs are used, the TXRDYM threshold can always be set to
+	 * trigger the XDMAC when at least 4 data can be written into the TX
+	 * FIFO, even if single byte accesses are performed.
+	 * However the RXRDYM threshold must be set to fit the access width,
+	 * deduced from buffer length, so the XDMAC is triggered properly to
+	 * read data from the RX FIFO.
+	 */
+	if (dev->fifo_size)
+		addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	memset(&slave_config, 0, sizeof(slave_config));
+	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
+	slave_config.src_addr_width = addr_width;
+	slave_config.src_maxburst = 1;
+	slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
+	slave_config.dst_addr_width = addr_width;
+	slave_config.dst_maxburst = 1;
+	slave_config.device_fc = false;
+
+	dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
+	if (IS_ERR(dma->chan_tx)) {
+		ret = PTR_ERR(dma->chan_tx);
+		dma->chan_tx = NULL;
+		goto error;
+	}
+
+	dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
+	if (IS_ERR(dma->chan_rx)) {
+		ret = PTR_ERR(dma->chan_rx);
+		dma->chan_rx = NULL;
+		goto error;
+	}
+
+	slave_config.direction = DMA_MEM_TO_DEV;
+	if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
+		dev_err(dev->dev, "failed to configure tx channel\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	slave_config.direction = DMA_DEV_TO_MEM;
+	if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
+		dev_err(dev->dev, "failed to configure rx channel\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	sg_init_table(dma->sg, 2);
+	dma->buf_mapped = false;
+	dma->xfer_in_progress = false;
+	dev->use_dma = true;
+
+	dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+		 dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+	return ret;
+
+error:
+	if (ret != -EPROBE_DEFER)
+		dev_info(dev->dev, "can't get DMA channel, continue without DMA support\n");
+	if (dma->chan_rx)
+		dma_release_channel(dma->chan_rx);
+	if (dma->chan_tx)
+		dma_release_channel(dma->chan_tx);
+	return ret;
+}
+
+static struct at91_twi_pdata *at91_twi_get_driver_data(
+					struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
+		if (!match)
+			return NULL;
+		return (struct at91_twi_pdata *)match->data;
+	}
+	return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
+}
+
+static int at91_twi_probe(struct platform_device *pdev)
+{
+	struct at91_twi_dev *dev;
+	struct resource *mem;
+	int rc;
+	u32 phy_addr;
+	u32 bus_clk_rate;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	init_completion(&dev->cmd_complete);
+	dev->dev = &pdev->dev;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -ENODEV;
+	phy_addr = mem->start;
+
+	dev->pdata = at91_twi_get_driver_data(pdev);
+	if (!dev->pdata)
+		return -ENODEV;
+
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
+
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq < 0)
+		return dev->irq;
+
+	rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
+			 dev_name(dev->dev), dev);
+	if (rc) {
+		dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
+		return rc;
+	}
+
+	platform_set_drvdata(pdev, dev);
+
+	dev->clk = devm_clk_get(dev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		dev_err(dev->dev, "no clock defined\n");
+		return -ENODEV;
+	}
+	rc = clk_prepare_enable(dev->clk);
+	if (rc)
+		return rc;
+
+	if (dev->dev->of_node) {
+		rc = at91_twi_configure_dma(dev, phy_addr);
+		if (rc == -EPROBE_DEFER) {
+			clk_disable_unprepare(dev->clk);
+			return rc;
+		}
+	}
+
+	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
+				  &dev->fifo_size)) {
+		dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
+	}
+
+	rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
+			&bus_clk_rate);
+	if (rc)
+		bus_clk_rate = DEFAULT_TWI_CLK_HZ;
+
+	at91_calc_twi_clock(dev, bus_clk_rate);
+	at91_init_twi_bus(dev);
+
+	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
+	i2c_set_adapdata(&dev->adapter, dev);
+	dev->adapter.owner = THIS_MODULE;
+	dev->adapter.class = I2C_CLASS_DEPRECATED;
+	dev->adapter.algo = &at91_twi_algorithm;
+	dev->adapter.quirks = &at91_twi_quirks;
+	dev->adapter.dev.parent = dev->dev;
+	dev->adapter.nr = pdev->id;
+	dev->adapter.timeout = AT91_I2C_TIMEOUT;
+	dev->adapter.dev.of_node = pdev->dev.of_node;
+
+	pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(dev->dev);
+	pm_runtime_set_active(dev->dev);
+	pm_runtime_enable(dev->dev);
+
+	rc = i2c_add_numbered_adapter(&dev->adapter);
+	if (rc) {
+		clk_disable_unprepare(dev->clk);
+
+		pm_runtime_disable(dev->dev);
+		pm_runtime_set_suspended(dev->dev);
+
+		return rc;
+	}
+
+	dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
+		 at91_twi_read(dev, AT91_TWI_VER));
+	return 0;
+}
+
+static int at91_twi_remove(struct platform_device *pdev)
+{
+	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+	clk_disable_unprepare(dev->clk);
+
+	pm_runtime_disable(dev->dev);
+	pm_runtime_set_suspended(dev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int at91_twi_runtime_suspend(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(twi_dev->clk);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int at91_twi_runtime_resume(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return clk_prepare_enable(twi_dev->clk);
+}
+
+static int at91_twi_suspend_noirq(struct device *dev)
+{
+	if (!pm_runtime_status_suspended(dev))
+		at91_twi_runtime_suspend(dev);
+
+	return 0;
+}
+
+static int at91_twi_resume_noirq(struct device *dev)
+{
+	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+	int ret;
+
+	if (!pm_runtime_status_suspended(dev)) {
+		ret = at91_twi_runtime_resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_request_autosuspend(dev);
+
+	at91_init_twi_bus(twi_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops at91_twi_pm = {
+	.suspend_noirq	= at91_twi_suspend_noirq,
+	.resume_noirq	= at91_twi_resume_noirq,
+	.runtime_suspend	= at91_twi_runtime_suspend,
+	.runtime_resume		= at91_twi_runtime_resume,
+};
+
+#define at91_twi_pm_ops (&at91_twi_pm)
+#else
+#define at91_twi_pm_ops NULL
+#endif
+
+static struct platform_driver at91_twi_driver = {
+	.probe		= at91_twi_probe,
+	.remove		= at91_twi_remove,
+	.id_table	= at91_twi_devtypes,
+	.driver		= {
+		.name	= "at91_i2c",
+		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
+		.pm	= at91_twi_pm_ops,
+	},
+};
+
+static int __init at91_twi_init(void)
+{
+	return platform_driver_register(&at91_twi_driver);
+}
+
+static void __exit at91_twi_exit(void)
+{
+	platform_driver_unregister(&at91_twi_driver);
+}
+
+subsys_initcall(at91_twi_init);
+module_exit(at91_twi_exit);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-au1550.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-au1550.c
new file mode 100644
index 0000000..5bcb1f0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-au1550.c
@@ -0,0 +1,401 @@
+/*
+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ *
+ * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
+ *
+ * The documentation describes this as an SMBus controller, but it doesn't
+ * understand any of the SMBus protocol in hardware.  It's really an I2C
+ * controller that could emulate most of the SMBus in software.
+ *
+ * This is just a skeleton adapter to use with the Au1550 PSC
+ * algorithm.  It was developed for the Pb1550, but will work with
+ * any Au1550 board that has a similar PSC configuration.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define PSC_SEL		0x00
+#define PSC_CTRL	0x04
+#define PSC_SMBCFG	0x08
+#define PSC_SMBMSK	0x0C
+#define PSC_SMBPCR	0x10
+#define PSC_SMBSTAT	0x14
+#define PSC_SMBEVNT	0x18
+#define PSC_SMBTXRX	0x1C
+#define PSC_SMBTMR	0x20
+
+struct i2c_au1550_data {
+	void __iomem *psc_base;
+	int	xfer_timeout;
+	struct i2c_adapter adap;
+};
+
+static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
+{
+	__raw_writel(v, a->psc_base + r);
+	wmb();
+}
+
+static inline unsigned long RD(struct i2c_au1550_data *a, int r)
+{
+	return __raw_readl(a->psc_base + r);
+}
+
+static int wait_xfer_done(struct i2c_au1550_data *adap)
+{
+	int i;
+
+	/* Wait for Tx Buffer Empty */
+	for (i = 0; i < adap->xfer_timeout; i++) {
+		if (RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_TE)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int wait_ack(struct i2c_au1550_data *adap)
+{
+	unsigned long stat;
+
+	if (wait_xfer_done(adap))
+		return -ETIMEDOUT;
+
+	stat = RD(adap, PSC_SMBEVNT);
+	if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int wait_master_done(struct i2c_au1550_data *adap)
+{
+	int i;
+
+	/* Wait for Master Done. */
+	for (i = 0; i < 2 * adap->xfer_timeout; i++) {
+		if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int
+do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
+{
+	unsigned long stat;
+
+	/* Reset the FIFOs, clear events. */
+	stat = RD(adap, PSC_SMBSTAT);
+	WR(adap, PSC_SMBEVNT, PSC_SMBEVNT_ALLCLR);
+
+	if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
+		WR(adap, PSC_SMBPCR, PSC_SMBPCR_DC);
+		while ((RD(adap, PSC_SMBPCR) & PSC_SMBPCR_DC) != 0)
+			cpu_relax();
+		udelay(50);
+	}
+
+	/* Write out the i2c chip address and specify operation */
+	addr <<= 1;
+	if (rd)
+		addr |= 1;
+
+	/* zero-byte xfers stop immediately */
+	if (q)
+		addr |= PSC_SMBTXRX_STP;
+
+	/* Put byte into fifo, start up master. */
+	WR(adap, PSC_SMBTXRX, addr);
+	WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
+	if (wait_ack(adap))
+		return -EIO;
+	return (q) ? wait_master_done(adap) : 0;
+}
+
+static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
+{
+	int j;
+
+	if (wait_xfer_done(adap))
+		return -EIO;
+
+	j =  adap->xfer_timeout * 100;
+	do {
+		j--;
+		if (j <= 0)
+			return -EIO;
+
+		if ((RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_RE) == 0)
+			j = 0;
+		else
+			udelay(1);
+	} while (j > 0);
+
+	*out = RD(adap, PSC_SMBTXRX);
+
+	return 0;
+}
+
+static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
+		    unsigned int len)
+{
+	int i;
+
+	if (len == 0)
+		return 0;
+
+	/* A read is performed by stuffing the transmit fifo with
+	 * zero bytes for timing, waiting for bytes to appear in the
+	 * receive fifo, then reading the bytes.
+	 */
+	i = 0;
+	while (i < (len - 1)) {
+		WR(adap, PSC_SMBTXRX, 0);
+		if (wait_for_rx_byte(adap, &buf[i]))
+			return -EIO;
+
+		i++;
+	}
+
+	/* The last byte has to indicate transfer done. */
+	WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
+	if (wait_master_done(adap))
+		return -EIO;
+
+	buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
+	return 0;
+}
+
+static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
+		     unsigned int len)
+{
+	int i;
+	unsigned long data;
+
+	if (len == 0)
+		return 0;
+
+	i = 0;
+	while (i < (len-1)) {
+		data = buf[i];
+		WR(adap, PSC_SMBTXRX, data);
+		if (wait_ack(adap))
+			return -EIO;
+		i++;
+	}
+
+	/* The last byte has to indicate transfer done. */
+	data = buf[i];
+	data |= PSC_SMBTXRX_STP;
+	WR(adap, PSC_SMBTXRX, data);
+	if (wait_master_done(adap))
+		return -EIO;
+	return 0;
+}
+
+static int
+au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_au1550_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *p;
+	int i, err = 0;
+
+	WR(adap, PSC_CTRL, PSC_CTRL_ENABLE);
+
+	for (i = 0; !err && i < num; i++) {
+		p = &msgs[i];
+		err = do_address(adap, p->addr, p->flags & I2C_M_RD,
+				 (p->len == 0));
+		if (err || !p->len)
+			continue;
+		if (p->flags & I2C_M_RD)
+			err = i2c_read(adap, p->buf, p->len);
+		else
+			err = i2c_write(adap, p->buf, p->len);
+	}
+
+	/* Return the number of messages processed, or the error code.
+	*/
+	if (err == 0)
+		err = num;
+
+	WR(adap, PSC_CTRL, PSC_CTRL_SUSPEND);
+
+	return err;
+}
+
+static u32 au1550_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm au1550_algo = {
+	.master_xfer	= au1550_xfer,
+	.functionality	= au1550_func,
+};
+
+static void i2c_au1550_setup(struct i2c_au1550_data *priv)
+{
+	unsigned long cfg;
+
+	WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
+	WR(priv, PSC_SEL, PSC_SEL_PS_SMBUSMODE);
+	WR(priv, PSC_SMBCFG, 0);
+	WR(priv, PSC_CTRL, PSC_CTRL_ENABLE);
+	while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+		cpu_relax();
+
+	cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | PSC_SMBCFG_DD_DISABLE;
+	WR(priv, PSC_SMBCFG, cfg);
+
+	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
+	 * timings are based on this clock.
+	 */
+	cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+	WR(priv, PSC_SMBCFG, cfg);
+	WR(priv, PSC_SMBMSK, PSC_SMBMSK_ALLMASK);
+
+	/* Set the protocol timer values.  See Table 71 in the
+	 * Au1550 Data Book for standard timing values.
+	 */
+	WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(20) | \
+		PSC_SMBTMR_SET_PU(20) | PSC_SMBTMR_SET_SH(20) | \
+		PSC_SMBTMR_SET_SU(20) | PSC_SMBTMR_SET_CL(20) | \
+		PSC_SMBTMR_SET_CH(20));
+
+	cfg |= PSC_SMBCFG_DE_ENABLE;
+	WR(priv, PSC_SMBCFG, cfg);
+	while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+		cpu_relax();
+
+	WR(priv, PSC_CTRL, PSC_CTRL_SUSPEND);
+}
+
+static void i2c_au1550_disable(struct i2c_au1550_data *priv)
+{
+	WR(priv, PSC_SMBCFG, 0);
+	WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
+}
+
+/*
+ * registering functions to load algorithms at runtime
+ * Prior to calling us, the 50MHz clock frequency and routing
+ * must have been set up for the PSC indicated by the adapter.
+ */
+static int
+i2c_au1550_probe(struct platform_device *pdev)
+{
+	struct i2c_au1550_data *priv;
+	struct resource *r;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_au1550_data),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->psc_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(priv->psc_base))
+		return PTR_ERR(priv->psc_base);
+
+	priv->xfer_timeout = 200;
+
+	priv->adap.nr = pdev->id;
+	priv->adap.algo = &au1550_algo;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &pdev->dev;
+	strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
+
+	/* Now, set up the PSC for SMBus PIO mode. */
+	i2c_au1550_setup(priv);
+
+	ret = i2c_add_numbered_adapter(&priv->adap);
+	if (ret) {
+		i2c_au1550_disable(priv);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+}
+
+static int i2c_au1550_remove(struct platform_device *pdev)
+{
+	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	i2c_au1550_disable(priv);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_au1550_suspend(struct device *dev)
+{
+	struct i2c_au1550_data *priv = dev_get_drvdata(dev);
+
+	i2c_au1550_disable(priv);
+
+	return 0;
+}
+
+static int i2c_au1550_resume(struct device *dev)
+{
+	struct i2c_au1550_data *priv = dev_get_drvdata(dev);
+
+	i2c_au1550_setup(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops i2c_au1550_pmops = {
+	.suspend	= i2c_au1550_suspend,
+	.resume		= i2c_au1550_resume,
+};
+
+#define AU1XPSC_SMBUS_PMOPS (&i2c_au1550_pmops)
+
+#else
+#define AU1XPSC_SMBUS_PMOPS NULL
+#endif
+
+static struct platform_driver au1xpsc_smbus_driver = {
+	.driver = {
+		.name	= "au1xpsc_smbus",
+		.pm	= AU1XPSC_SMBUS_PMOPS,
+	},
+	.probe		= i2c_au1550_probe,
+	.remove		= i2c_au1550_remove,
+};
+
+module_platform_driver(au1xpsc_smbus_driver);
+
+MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
+MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:au1xpsc_smbus");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-axxia.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-axxia.c
new file mode 100644
index 0000000..30d80ce
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-axxia.c
@@ -0,0 +1,623 @@
+/*
+ * This driver implements I2C master functionality using the LSI API2C
+ * controller.
+ *
+ * NOTE: The controller has a limitation in that it can only do transfers of
+ * maximum 255 bytes at a time. If a larger transfer is attempted, error code
+ * (-EINVAL) is returned.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#define SCL_WAIT_TIMEOUT_NS 25000000
+#define I2C_XFER_TIMEOUT    (msecs_to_jiffies(250))
+#define I2C_STOP_TIMEOUT    (msecs_to_jiffies(100))
+#define FIFO_SIZE           8
+
+#define GLOBAL_CONTROL		0x00
+#define   GLOBAL_MST_EN         BIT(0)
+#define   GLOBAL_SLV_EN         BIT(1)
+#define   GLOBAL_IBML_EN        BIT(2)
+#define INTERRUPT_STATUS	0x04
+#define INTERRUPT_ENABLE	0x08
+#define   INT_SLV               BIT(1)
+#define   INT_MST               BIT(0)
+#define WAIT_TIMER_CONTROL	0x0c
+#define   WT_EN			BIT(15)
+#define   WT_VALUE(_x)		((_x) & 0x7fff)
+#define IBML_TIMEOUT		0x10
+#define IBML_LOW_MEXT		0x14
+#define IBML_LOW_SEXT		0x18
+#define TIMER_CLOCK_DIV		0x1c
+#define I2C_BUS_MONITOR		0x20
+#define   BM_SDAC		BIT(3)
+#define   BM_SCLC		BIT(2)
+#define   BM_SDAS		BIT(1)
+#define   BM_SCLS		BIT(0)
+#define SOFT_RESET		0x24
+#define MST_COMMAND		0x28
+#define   CMD_BUSY		(1<<3)
+#define   CMD_MANUAL		(0x00 | CMD_BUSY)
+#define   CMD_AUTO		(0x01 | CMD_BUSY)
+#define MST_RX_XFER		0x2c
+#define MST_TX_XFER		0x30
+#define MST_ADDR_1		0x34
+#define MST_ADDR_2		0x38
+#define MST_DATA		0x3c
+#define MST_TX_FIFO		0x40
+#define MST_RX_FIFO		0x44
+#define MST_INT_ENABLE		0x48
+#define MST_INT_STATUS		0x4c
+#define   MST_STATUS_RFL	(1 << 13) /* RX FIFO serivce */
+#define   MST_STATUS_TFL	(1 << 12) /* TX FIFO service */
+#define   MST_STATUS_SNS	(1 << 11) /* Manual mode done */
+#define   MST_STATUS_SS		(1 << 10) /* Automatic mode done */
+#define   MST_STATUS_SCC	(1 << 9)  /* Stop complete */
+#define   MST_STATUS_IP		(1 << 8)  /* Invalid parameter */
+#define   MST_STATUS_TSS	(1 << 7)  /* Timeout */
+#define   MST_STATUS_AL		(1 << 6)  /* Arbitration lost */
+#define   MST_STATUS_ND		(1 << 5)  /* NAK on data phase */
+#define   MST_STATUS_NA		(1 << 4)  /* NAK on address phase */
+#define   MST_STATUS_NAK	(MST_STATUS_NA | \
+				 MST_STATUS_ND)
+#define   MST_STATUS_ERR	(MST_STATUS_NAK | \
+				 MST_STATUS_AL  | \
+				 MST_STATUS_IP)
+#define MST_TX_BYTES_XFRD	0x50
+#define MST_RX_BYTES_XFRD	0x54
+#define SCL_HIGH_PERIOD		0x80
+#define SCL_LOW_PERIOD		0x84
+#define SPIKE_FLTR_LEN		0x88
+#define SDA_SETUP_TIME		0x8c
+#define SDA_HOLD_TIME		0x90
+
+/**
+ * axxia_i2c_dev - I2C device context
+ * @base: pointer to register struct
+ * @msg: pointer to current message
+ * @msg_xfrd: number of bytes transferred in msg
+ * @msg_err: error code for completed message
+ * @msg_complete: xfer completion object
+ * @dev: device reference
+ * @adapter: core i2c abstraction
+ * @i2c_clk: clock reference for i2c input clock
+ * @bus_clk_rate: current i2c bus clock rate
+ */
+struct axxia_i2c_dev {
+	void __iomem *base;
+	struct i2c_msg *msg;
+	size_t msg_xfrd;
+	int msg_err;
+	struct completion msg_complete;
+	struct device *dev;
+	struct i2c_adapter adapter;
+	struct clk *i2c_clk;
+	u32 bus_clk_rate;
+};
+
+static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
+{
+	u32 int_en;
+
+	int_en = readl(idev->base + MST_INT_ENABLE);
+	writel(int_en & ~mask, idev->base + MST_INT_ENABLE);
+}
+
+static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
+{
+	u32 int_en;
+
+	int_en = readl(idev->base + MST_INT_ENABLE);
+	writel(int_en | mask, idev->base + MST_INT_ENABLE);
+}
+
+/**
+ * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
+ */
+static u32 ns_to_clk(u64 ns, u32 clk_mhz)
+{
+	return div_u64(ns * clk_mhz, 1000);
+}
+
+static int axxia_i2c_init(struct axxia_i2c_dev *idev)
+{
+	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
+	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
+	u32 t_setup;
+	u32 t_high, t_low;
+	u32 tmo_clk;
+	u32 prescale;
+	unsigned long timeout;
+
+	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
+		idev->bus_clk_rate, clk_mhz, divisor);
+
+	/* Reset controller */
+	writel(0x01, idev->base + SOFT_RESET);
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (readl(idev->base + SOFT_RESET) & 1) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(idev->dev, "Soft reset failed\n");
+			break;
+		}
+	}
+
+	/* Enable Master Mode */
+	writel(0x1, idev->base + GLOBAL_CONTROL);
+
+	if (idev->bus_clk_rate <= 100000) {
+		/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
+		t_high = divisor * 1 / 2;
+		t_low = divisor * 1 / 2;
+		t_setup = ns_to_clk(250, clk_mhz);
+	} else {
+		/* Fast mode SCL 33/66, tSU:DAT = 100 ns */
+		t_high = divisor * 1 / 3;
+		t_low = divisor * 2 / 3;
+		t_setup = ns_to_clk(100, clk_mhz);
+	}
+
+	/* SCL High Time */
+	writel(t_high, idev->base + SCL_HIGH_PERIOD);
+	/* SCL Low Time */
+	writel(t_low, idev->base + SCL_LOW_PERIOD);
+	/* SDA Setup Time */
+	writel(t_setup, idev->base + SDA_SETUP_TIME);
+	/* SDA Hold Time, 300ns */
+	writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME);
+	/* Filter <50ns spikes */
+	writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN);
+
+	/* Configure Time-Out Registers */
+	tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz);
+
+	/* Find prescaler value that makes tmo_clk fit in 15-bits counter. */
+	for (prescale = 0; prescale < 15; ++prescale) {
+		if (tmo_clk <= 0x7fff)
+			break;
+		tmo_clk >>= 1;
+	}
+	if (tmo_clk > 0x7fff)
+		tmo_clk = 0x7fff;
+
+	/* Prescale divider (log2) */
+	writel(prescale, idev->base + TIMER_CLOCK_DIV);
+	/* Timeout in divided clocks */
+	writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL);
+
+	/* Mask all master interrupt bits */
+	i2c_int_disable(idev, ~0);
+
+	/* Interrupt enable */
+	writel(0x01, idev->base + INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static int i2c_m_rd(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_RD) != 0;
+}
+
+static int i2c_m_ten(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_TEN) != 0;
+}
+
+static int i2c_m_recv_len(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_RECV_LEN) != 0;
+}
+
+/**
+ * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
+ * transfer length if this is the first byte of such a transfer.
+ */
+static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
+{
+	struct i2c_msg *msg = idev->msg;
+	size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO);
+	int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd);
+
+	while (bytes_to_transfer-- > 0) {
+		int c = readl(idev->base + MST_DATA);
+
+		if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
+			/*
+			 * Check length byte for SMBus block read
+			 */
+			if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
+				idev->msg_err = -EPROTO;
+				i2c_int_disable(idev, ~MST_STATUS_TSS);
+				complete(&idev->msg_complete);
+				break;
+			}
+			msg->len = 1 + c;
+			writel(msg->len, idev->base + MST_RX_XFER);
+		}
+		msg->buf[idev->msg_xfrd++] = c;
+	}
+
+	return 0;
+}
+
+/**
+ * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
+ * @return: Number of bytes left to transfer.
+ */
+static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
+{
+	struct i2c_msg *msg = idev->msg;
+	size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO);
+	int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd);
+	int ret = msg->len - idev->msg_xfrd - bytes_to_transfer;
+
+	while (bytes_to_transfer-- > 0)
+		writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA);
+
+	return ret;
+}
+
+static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
+{
+	struct axxia_i2c_dev *idev = _dev;
+	u32 status;
+
+	if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
+		return IRQ_NONE;
+
+	/* Read interrupt status bits */
+	status = readl(idev->base + MST_INT_STATUS);
+
+	if (!idev->msg) {
+		dev_warn(idev->dev, "unexpected interrupt\n");
+		goto out;
+	}
+
+	/* RX FIFO needs service? */
+	if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
+		axxia_i2c_empty_rx_fifo(idev);
+
+	/* TX FIFO needs service? */
+	if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
+		if (axxia_i2c_fill_tx_fifo(idev) == 0)
+			i2c_int_disable(idev, MST_STATUS_TFL);
+	}
+
+	if (unlikely(status & MST_STATUS_ERR)) {
+		/* Transfer error */
+		i2c_int_disable(idev, ~0);
+		if (status & MST_STATUS_AL)
+			idev->msg_err = -EAGAIN;
+		else if (status & MST_STATUS_NAK)
+			idev->msg_err = -ENXIO;
+		else
+			idev->msg_err = -EIO;
+		dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n",
+			status,
+			idev->msg->addr,
+			readl(idev->base + MST_RX_BYTES_XFRD),
+			readl(idev->base + MST_RX_XFER),
+			readl(idev->base + MST_TX_BYTES_XFRD),
+			readl(idev->base + MST_TX_XFER));
+		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_SCC) {
+		/* Stop completed */
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
+		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_SNS) {
+		/* Transfer done */
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
+		if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
+			axxia_i2c_empty_rx_fifo(idev);
+		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_TSS) {
+		/* Transfer timeout */
+		idev->msg_err = -ETIMEDOUT;
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
+		complete(&idev->msg_complete);
+	}
+
+out:
+	/* Clear interrupt */
+	writel(INT_MST, idev->base + INTERRUPT_STATUS);
+
+	return IRQ_HANDLED;
+}
+
+static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
+{
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
+	u32 rx_xfer, tx_xfer;
+	u32 addr_1, addr_2;
+	unsigned long time_left;
+	unsigned int wt_value;
+
+	idev->msg = msg;
+	idev->msg_xfrd = 0;
+	reinit_completion(&idev->msg_complete);
+
+	if (i2c_m_ten(msg)) {
+		/* 10-bit address
+		 *   addr_1: 5'b11110 | addr[9:8] | (R/nW)
+		 *   addr_2: addr[7:0]
+		 */
+		addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
+		addr_2 = msg->addr & 0xFF;
+	} else {
+		/* 7-bit address
+		 *   addr_1: addr[6:0] | (R/nW)
+		 *   addr_2: dont care
+		 */
+		addr_1 = (msg->addr << 1) & 0xFF;
+		addr_2 = 0;
+	}
+
+	if (i2c_m_rd(msg)) {
+		/* I2C read transfer */
+		rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
+		tx_xfer = 0;
+		addr_1 |= 1;	/* Set the R/nW bit of the address */
+	} else {
+		/* I2C write transfer */
+		rx_xfer = 0;
+		tx_xfer = msg->len;
+	}
+
+	writel(rx_xfer, idev->base + MST_RX_XFER);
+	writel(tx_xfer, idev->base + MST_TX_XFER);
+	writel(addr_1, idev->base + MST_ADDR_1);
+	writel(addr_2, idev->base + MST_ADDR_2);
+
+	if (i2c_m_rd(msg))
+		int_mask |= MST_STATUS_RFL;
+	else if (axxia_i2c_fill_tx_fifo(idev) != 0)
+		int_mask |= MST_STATUS_TFL;
+
+	wt_value = WT_VALUE(readl(idev->base + WAIT_TIMER_CONTROL));
+	/* Disable wait timer temporarly */
+	writel(wt_value, idev->base + WAIT_TIMER_CONTROL);
+	/* Check if timeout error happened */
+	if (idev->msg_err)
+		goto out;
+
+	/* Start manual mode */
+	writel(CMD_MANUAL, idev->base + MST_COMMAND);
+
+	writel(WT_EN | wt_value, idev->base + WAIT_TIMER_CONTROL);
+
+	i2c_int_enable(idev, int_mask);
+
+	time_left = wait_for_completion_timeout(&idev->msg_complete,
+					      I2C_XFER_TIMEOUT);
+
+	i2c_int_disable(idev, int_mask);
+
+	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+		dev_warn(idev->dev, "busy after xfer\n");
+
+	if (time_left == 0) {
+		idev->msg_err = -ETIMEDOUT;
+		i2c_recover_bus(&idev->adapter);
+		axxia_i2c_init(idev);
+	}
+
+out:
+	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO &&
+			idev->msg_err != -ETIMEDOUT)
+		axxia_i2c_init(idev);
+
+	return idev->msg_err;
+}
+
+static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
+{
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC | MST_STATUS_TSS;
+	unsigned long time_left;
+
+	reinit_completion(&idev->msg_complete);
+
+	/* Issue stop */
+	writel(0xb, idev->base + MST_COMMAND);
+	i2c_int_enable(idev, int_mask);
+	time_left = wait_for_completion_timeout(&idev->msg_complete,
+					      I2C_STOP_TIMEOUT);
+	i2c_int_disable(idev, int_mask);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+		dev_warn(idev->dev, "busy after stop\n");
+
+	return 0;
+}
+
+static int
+axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+	int i;
+	int ret = 0;
+
+	idev->msg_err = 0;
+	i2c_int_enable(idev, MST_STATUS_TSS);
+
+	for (i = 0; ret == 0 && i < num; ++i)
+		ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
+
+	axxia_i2c_stop(idev);
+
+	return ret ? : i;
+}
+
+static int axxia_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+
+	return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SCLS);
+}
+
+static void axxia_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+	u32 tmp;
+
+	/* Preserve SDA Control */
+	tmp = readl(idev->base + I2C_BUS_MONITOR) & BM_SDAC;
+	if (!val)
+		tmp |= BM_SCLC;
+	writel(tmp, idev->base + I2C_BUS_MONITOR);
+}
+
+static int axxia_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+
+	return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SDAS);
+}
+
+static struct i2c_bus_recovery_info axxia_i2c_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.get_scl = axxia_i2c_get_scl,
+	.set_scl = axxia_i2c_set_scl,
+	.get_sda = axxia_i2c_get_sda,
+};
+
+static u32 axxia_i2c_func(struct i2c_adapter *adap)
+{
+	u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		    I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA);
+	return caps;
+}
+
+static const struct i2c_algorithm axxia_i2c_algo = {
+	.master_xfer = axxia_i2c_xfer,
+	.functionality = axxia_i2c_func,
+};
+
+static const struct i2c_adapter_quirks axxia_i2c_quirks = {
+	.max_read_len = 255,
+	.max_write_len = 255,
+};
+
+static int axxia_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct axxia_i2c_dev *idev = NULL;
+	struct resource *res;
+	void __iomem *base;
+	int irq;
+	int ret = 0;
+
+	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+	if (!idev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing interrupt resource\n");
+		return irq;
+	}
+
+	idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
+	if (IS_ERR(idev->i2c_clk)) {
+		dev_err(&pdev->dev, "missing clock\n");
+		return PTR_ERR(idev->i2c_clk);
+	}
+
+	idev->base = base;
+	idev->dev = &pdev->dev;
+	init_completion(&idev->msg_complete);
+
+	of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
+	if (idev->bus_clk_rate == 0)
+		idev->bus_clk_rate = 100000;	/* default clock rate */
+
+	ret = axxia_i2c_init(idev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize\n");
+		return ret;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
+			       pdev->name, idev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	i2c_set_adapdata(&idev->adapter, idev);
+	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
+	idev->adapter.owner = THIS_MODULE;
+	idev->adapter.algo = &axxia_i2c_algo;
+	idev->adapter.bus_recovery_info = &axxia_i2c_recovery_info;
+	idev->adapter.quirks = &axxia_i2c_quirks;
+	idev->adapter.dev.parent = &pdev->dev;
+	idev->adapter.dev.of_node = pdev->dev.of_node;
+
+	platform_set_drvdata(pdev, idev);
+
+	ret = i2c_add_adapter(&idev->adapter);
+	if (ret) {
+		clk_disable_unprepare(idev->i2c_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int axxia_i2c_remove(struct platform_device *pdev)
+{
+	struct axxia_i2c_dev *idev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(idev->i2c_clk);
+	i2c_del_adapter(&idev->adapter);
+
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id axxia_i2c_of_match[] = {
+	{ .compatible = "lsi,api2c", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, axxia_i2c_of_match);
+
+static struct platform_driver axxia_i2c_driver = {
+	.probe = axxia_i2c_probe,
+	.remove = axxia_i2c_remove,
+	.driver = {
+		.name = "axxia-i2c",
+		.of_match_table = axxia_i2c_of_match,
+	},
+};
+
+module_platform_driver(axxia_i2c_driver);
+
+MODULE_DESCRIPTION("Axxia I2C Bus driver");
+MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-iproc.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-iproc.c
new file mode 100644
index 0000000..4c8c3bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CFG_OFFSET                   0x00
+#define CFG_RESET_SHIFT              31
+#define CFG_EN_SHIFT                 30
+#define CFG_M_RETRY_CNT_SHIFT        16
+#define CFG_M_RETRY_CNT_MASK         0x0f
+
+#define TIM_CFG_OFFSET               0x04
+#define TIM_CFG_MODE_400_SHIFT       31
+
+#define M_FIFO_CTRL_OFFSET           0x0c
+#define M_FIFO_RX_FLUSH_SHIFT        31
+#define M_FIFO_TX_FLUSH_SHIFT        30
+#define M_FIFO_RX_CNT_SHIFT          16
+#define M_FIFO_RX_CNT_MASK           0x7f
+#define M_FIFO_RX_THLD_SHIFT         8
+#define M_FIFO_RX_THLD_MASK          0x3f
+
+#define M_CMD_OFFSET                 0x30
+#define M_CMD_START_BUSY_SHIFT       31
+#define M_CMD_STATUS_SHIFT           25
+#define M_CMD_STATUS_MASK            0x07
+#define M_CMD_STATUS_SUCCESS         0x0
+#define M_CMD_STATUS_LOST_ARB        0x1
+#define M_CMD_STATUS_NACK_ADDR       0x2
+#define M_CMD_STATUS_NACK_DATA       0x3
+#define M_CMD_STATUS_TIMEOUT         0x4
+#define M_CMD_PROTOCOL_SHIFT         9
+#define M_CMD_PROTOCOL_MASK          0xf
+#define M_CMD_PROTOCOL_BLK_WR        0x7
+#define M_CMD_PROTOCOL_BLK_RD        0x8
+#define M_CMD_PEC_SHIFT              8
+#define M_CMD_RD_CNT_SHIFT           0
+#define M_CMD_RD_CNT_MASK            0xff
+
+#define IE_OFFSET                    0x38
+#define IE_M_RX_FIFO_FULL_SHIFT      31
+#define IE_M_RX_THLD_SHIFT           30
+#define IE_M_START_BUSY_SHIFT        28
+#define IE_M_TX_UNDERRUN_SHIFT       27
+
+#define IS_OFFSET                    0x3c
+#define IS_M_RX_FIFO_FULL_SHIFT      31
+#define IS_M_RX_THLD_SHIFT           30
+#define IS_M_START_BUSY_SHIFT        28
+#define IS_M_TX_UNDERRUN_SHIFT       27
+
+#define M_TX_OFFSET                  0x40
+#define M_TX_WR_STATUS_SHIFT         31
+#define M_TX_DATA_SHIFT              0
+#define M_TX_DATA_MASK               0xff
+
+#define M_RX_OFFSET                  0x44
+#define M_RX_STATUS_SHIFT            30
+#define M_RX_STATUS_MASK             0x03
+#define M_RX_PEC_ERR_SHIFT           29
+#define M_RX_DATA_SHIFT              0
+#define M_RX_DATA_MASK               0xff
+
+#define I2C_TIMEOUT_MSEC             50000
+#define M_TX_RX_FIFO_SIZE            64
+
+enum bus_speed_index {
+	I2C_SPD_100K = 0,
+	I2C_SPD_400K,
+};
+
+struct bcm_iproc_i2c_dev {
+	struct device *device;
+	int irq;
+
+	void __iomem *base;
+
+	struct i2c_adapter adapter;
+	unsigned int bus_speed;
+
+	struct completion done;
+	int xfer_is_done;
+
+	struct i2c_msg *msg;
+
+	/* bytes that have been transferred */
+	unsigned int tx_bytes;
+};
+
+/*
+ * Can be expanded in the future if more interrupt status bits are utilized
+ */
+#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT))
+
+static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
+{
+	struct bcm_iproc_i2c_dev *iproc_i2c = data;
+	u32 status = readl(iproc_i2c->base + IS_OFFSET);
+
+	status &= ISR_MASK;
+
+	if (!status)
+		return IRQ_NONE;
+
+	/* TX FIFO is empty and we have more data to send */
+	if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) {
+		struct i2c_msg *msg = iproc_i2c->msg;
+		unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes;
+		unsigned int i;
+		u32 val;
+
+		/* can only fill up to the FIFO size */
+		tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE);
+		for (i = 0; i < tx_bytes; i++) {
+			/* start from where we left over */
+			unsigned int idx = iproc_i2c->tx_bytes + i;
+
+			val = msg->buf[idx];
+
+			/* mark the last byte */
+			if (idx == msg->len - 1) {
+				u32 tmp;
+
+				val |= BIT(M_TX_WR_STATUS_SHIFT);
+
+				/*
+				 * Since this is the last byte, we should
+				 * now disable TX FIFO underrun interrupt
+				 */
+				tmp = readl(iproc_i2c->base + IE_OFFSET);
+				tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT);
+				writel(tmp, iproc_i2c->base + IE_OFFSET);
+			}
+
+			/* load data into TX FIFO */
+			writel(val, iproc_i2c->base + M_TX_OFFSET);
+		}
+		/* update number of transferred bytes */
+		iproc_i2c->tx_bytes += tx_bytes;
+	}
+
+	if (status & BIT(IS_M_START_BUSY_SHIFT)) {
+		iproc_i2c->xfer_is_done = 1;
+		complete(&iproc_i2c->done);
+	}
+
+	writel(status, iproc_i2c->base + IS_OFFSET);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+	u32 val;
+
+	/* put controller in reset */
+	val = readl(iproc_i2c->base + CFG_OFFSET);
+	val |= 1 << CFG_RESET_SHIFT;
+	val &= ~(1 << CFG_EN_SHIFT);
+	writel(val, iproc_i2c->base + CFG_OFFSET);
+
+	/* wait 100 usec per spec */
+	udelay(100);
+
+	/* bring controller out of reset */
+	val &= ~(1 << CFG_RESET_SHIFT);
+	writel(val, iproc_i2c->base + CFG_OFFSET);
+
+	/* flush TX/RX FIFOs and set RX FIFO threshold to zero */
+	val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT);
+	writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+	/* disable all interrupts */
+	writel(0, iproc_i2c->base + IE_OFFSET);
+
+	/* clear all pending interrupts */
+	writel(0xffffffff, iproc_i2c->base + IS_OFFSET);
+
+	return 0;
+}
+
+static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
+					 bool enable)
+{
+	u32 val;
+
+	val = readl(iproc_i2c->base + CFG_OFFSET);
+	if (enable)
+		val |= BIT(CFG_EN_SHIFT);
+	else
+		val &= ~BIT(CFG_EN_SHIFT);
+	writel(val, iproc_i2c->base + CFG_OFFSET);
+}
+
+static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
+				      struct i2c_msg *msg)
+{
+	u32 val;
+
+	val = readl(iproc_i2c->base + M_CMD_OFFSET);
+	val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK;
+
+	switch (val) {
+	case M_CMD_STATUS_SUCCESS:
+		return 0;
+
+	case M_CMD_STATUS_LOST_ARB:
+		dev_dbg(iproc_i2c->device, "lost bus arbitration\n");
+		return -EAGAIN;
+
+	case M_CMD_STATUS_NACK_ADDR:
+		dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr);
+		return -ENXIO;
+
+	case M_CMD_STATUS_NACK_DATA:
+		dev_dbg(iproc_i2c->device, "NAK data\n");
+		return -ENXIO;
+
+	case M_CMD_STATUS_TIMEOUT:
+		dev_dbg(iproc_i2c->device, "bus timeout\n");
+		return -ETIMEDOUT;
+
+	default:
+		dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
+
+		/* re-initialize i2c for recovery */
+		bcm_iproc_i2c_enable_disable(iproc_i2c, false);
+		bcm_iproc_i2c_init(iproc_i2c);
+		bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
+		return -EIO;
+	}
+}
+
+static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
+					 struct i2c_msg *msg)
+{
+	int ret, i;
+	u8 addr;
+	u32 val;
+	unsigned int tx_bytes;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC);
+
+	/* check if bus is busy */
+	if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
+	       BIT(M_CMD_START_BUSY_SHIFT))) {
+		dev_warn(iproc_i2c->device, "bus is busy\n");
+		return -EBUSY;
+	}
+
+	iproc_i2c->msg = msg;
+
+	/* format and load slave address into the TX FIFO */
+	addr = i2c_8bit_addr_from_msg(msg);
+	writel(addr, iproc_i2c->base + M_TX_OFFSET);
+
+	/*
+	 * For a write transaction, load data into the TX FIFO. Only allow
+	 * loading up to TX FIFO size - 1 bytes of data since the first byte
+	 * has been used up by the slave address
+	 */
+	tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1);
+	if (!(msg->flags & I2C_M_RD)) {
+		for (i = 0; i < tx_bytes; i++) {
+			val = msg->buf[i];
+
+			/* mark the last byte */
+			if (i == msg->len - 1)
+				val |= 1 << M_TX_WR_STATUS_SHIFT;
+
+			writel(val, iproc_i2c->base + M_TX_OFFSET);
+		}
+		iproc_i2c->tx_bytes = tx_bytes;
+	}
+
+	/* mark as incomplete before starting the transaction */
+	reinit_completion(&iproc_i2c->done);
+	iproc_i2c->xfer_is_done = 0;
+
+	/*
+	 * Enable the "start busy" interrupt, which will be triggered after the
+	 * transaction is done, i.e., the internal start_busy bit, transitions
+	 * from 1 to 0.
+	 */
+	val = BIT(IE_M_START_BUSY_SHIFT);
+
+	/*
+	 * If TX data size is larger than the TX FIFO, need to enable TX
+	 * underrun interrupt, which will be triggerred when the TX FIFO is
+	 * empty. When that happens we can then pump more data into the FIFO
+	 */
+	if (!(msg->flags & I2C_M_RD) &&
+	    msg->len > iproc_i2c->tx_bytes)
+		val |= BIT(IE_M_TX_UNDERRUN_SHIFT);
+
+	writel(val, iproc_i2c->base + IE_OFFSET);
+
+	/*
+	 * Now we can activate the transfer. For a read operation, specify the
+	 * number of bytes to read
+	 */
+	val = BIT(M_CMD_START_BUSY_SHIFT);
+	if (msg->flags & I2C_M_RD) {
+		val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) |
+		       (msg->len << M_CMD_RD_CNT_SHIFT);
+	} else {
+		val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
+	}
+	writel(val, iproc_i2c->base + M_CMD_OFFSET);
+
+	time_left = wait_for_completion_timeout(&iproc_i2c->done, time_left);
+
+	/* disable all interrupts */
+	writel(0, iproc_i2c->base + IE_OFFSET);
+	/* read it back to flush the write */
+	readl(iproc_i2c->base + IE_OFFSET);
+
+	/* make sure the interrupt handler isn't running */
+	synchronize_irq(iproc_i2c->irq);
+
+	if (!time_left && !iproc_i2c->xfer_is_done) {
+		dev_err(iproc_i2c->device, "transaction timed out\n");
+
+		/* flush FIFOs */
+		val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
+		      (1 << M_FIFO_TX_FLUSH_SHIFT);
+		writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+		return -ETIMEDOUT;
+	}
+
+	ret = bcm_iproc_i2c_check_status(iproc_i2c, msg);
+	if (ret) {
+		/* flush both TX/RX FIFOs */
+		val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
+		      (1 << M_FIFO_TX_FLUSH_SHIFT);
+		writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+		return ret;
+	}
+
+	/*
+	 * For a read operation, we now need to load the data from FIFO
+	 * into the memory buffer
+	 */
+	if (msg->flags & I2C_M_RD) {
+		for (i = 0; i < msg->len; i++) {
+			msg->buf[i] = (readl(iproc_i2c->base + M_RX_OFFSET) >>
+				      M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
+		}
+	}
+
+	return 0;
+}
+
+static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
+			      struct i2c_msg msgs[], int num)
+{
+	struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
+	int ret, i;
+
+	/* go through all messages */
+	for (i = 0; i < num; i++) {
+		ret = bcm_iproc_i2c_xfer_single_msg(iproc_i2c, &msgs[i]);
+		if (ret) {
+			dev_dbg(iproc_i2c->device, "xfer failed\n");
+			return ret;
+		}
+	}
+
+	return num;
+}
+
+static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm bcm_iproc_algo = {
+	.master_xfer = bcm_iproc_i2c_xfer,
+	.functionality = bcm_iproc_i2c_functionality,
+};
+
+static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
+	/* need to reserve one byte in the FIFO for the slave address */
+	.max_read_len = M_TX_RX_FIFO_SIZE - 1,
+};
+
+static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+	unsigned int bus_speed;
+	u32 val;
+	int ret = of_property_read_u32(iproc_i2c->device->of_node,
+				       "clock-frequency", &bus_speed);
+	if (ret < 0) {
+		dev_info(iproc_i2c->device,
+			"unable to interpret clock-frequency DT property\n");
+		bus_speed = 100000;
+	}
+
+	if (bus_speed < 100000) {
+		dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
+			bus_speed);
+		dev_err(iproc_i2c->device,
+			"valid speeds are 100khz and 400khz\n");
+		return -EINVAL;
+	} else if (bus_speed < 400000) {
+		bus_speed = 100000;
+	} else {
+		bus_speed = 400000;
+	}
+
+	iproc_i2c->bus_speed = bus_speed;
+	val = readl(iproc_i2c->base + TIM_CFG_OFFSET);
+	val &= ~(1 << TIM_CFG_MODE_400_SHIFT);
+	val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	writel(val, iproc_i2c->base + TIM_CFG_OFFSET);
+
+	dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
+
+	return 0;
+}
+
+static int bcm_iproc_i2c_probe(struct platform_device *pdev)
+{
+	int irq, ret = 0;
+	struct bcm_iproc_i2c_dev *iproc_i2c;
+	struct i2c_adapter *adap;
+	struct resource *res;
+
+	iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c),
+				 GFP_KERNEL);
+	if (!iproc_i2c)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iproc_i2c);
+	iproc_i2c->device = &pdev->dev;
+	init_completion(&iproc_i2c->done);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res);
+	if (IS_ERR(iproc_i2c->base))
+		return PTR_ERR(iproc_i2c->base);
+
+	ret = bcm_iproc_i2c_init(iproc_i2c);
+	if (ret)
+		return ret;
+
+	ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(iproc_i2c->device, "no irq resource\n");
+		return irq;
+	}
+	iproc_i2c->irq = irq;
+
+	ret = devm_request_irq(iproc_i2c->device, irq, bcm_iproc_i2c_isr, 0,
+			       pdev->name, iproc_i2c);
+	if (ret < 0) {
+		dev_err(iproc_i2c->device, "unable to request irq %i\n", irq);
+		return ret;
+	}
+
+	bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
+	adap = &iproc_i2c->adapter;
+	i2c_set_adapdata(adap, iproc_i2c);
+	strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
+	adap->algo = &bcm_iproc_algo;
+	adap->quirks = &bcm_iproc_i2c_quirks;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	return i2c_add_adapter(adap);
+}
+
+static int bcm_iproc_i2c_remove(struct platform_device *pdev)
+{
+	struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
+
+	/* make sure there's no pending interrupt when we remove the adapter */
+	writel(0, iproc_i2c->base + IE_OFFSET);
+	readl(iproc_i2c->base + IE_OFFSET);
+	synchronize_irq(iproc_i2c->irq);
+
+	i2c_del_adapter(&iproc_i2c->adapter);
+	bcm_iproc_i2c_enable_disable(iproc_i2c, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int bcm_iproc_i2c_suspend(struct device *dev)
+{
+	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
+
+	/* make sure there's no pending interrupt when we go into suspend */
+	writel(0, iproc_i2c->base + IE_OFFSET);
+	readl(iproc_i2c->base + IE_OFFSET);
+	synchronize_irq(iproc_i2c->irq);
+
+	/* now disable the controller */
+	bcm_iproc_i2c_enable_disable(iproc_i2c, false);
+
+	return 0;
+}
+
+static int bcm_iproc_i2c_resume(struct device *dev)
+{
+	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
+	int ret;
+	u32 val;
+
+	/*
+	 * Power domain could have been shut off completely in system deep
+	 * sleep, so re-initialize the block here
+	 */
+	ret = bcm_iproc_i2c_init(iproc_i2c);
+	if (ret)
+		return ret;
+
+	/* configure to the desired bus speed */
+	val = readl(iproc_i2c->base + TIM_CFG_OFFSET);
+	val &= ~(1 << TIM_CFG_MODE_400_SHIFT);
+	val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	writel(val, iproc_i2c->base + TIM_CFG_OFFSET);
+
+	bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = {
+	.suspend_late = &bcm_iproc_i2c_suspend,
+	.resume_early = &bcm_iproc_i2c_resume
+};
+
+#define BCM_IPROC_I2C_PM_OPS (&bcm_iproc_i2c_pm_ops)
+#else
+#define BCM_IPROC_I2C_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id bcm_iproc_i2c_of_match[] = {
+	{ .compatible = "brcm,iproc-i2c" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match);
+
+static struct platform_driver bcm_iproc_i2c_driver = {
+	.driver = {
+		.name = "bcm-iproc-i2c",
+		.of_match_table = bcm_iproc_i2c_of_match,
+		.pm = BCM_IPROC_I2C_PM_OPS,
+	},
+	.probe = bcm_iproc_i2c_probe,
+	.remove = bcm_iproc_i2c_remove,
+};
+module_platform_driver(bcm_iproc_i2c_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom iProc I2C Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-kona.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-kona.c
new file mode 100644
index 0000000..4e489a9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm-kona.c
@@ -0,0 +1,902 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/* Hardware register offsets and field defintions */
+#define CS_OFFSET				0x00000020
+#define CS_ACK_SHIFT				3
+#define CS_ACK_MASK				0x00000008
+#define CS_ACK_CMD_GEN_START			0x00000000
+#define CS_ACK_CMD_GEN_RESTART			0x00000001
+#define CS_CMD_SHIFT				1
+#define CS_CMD_CMD_NO_ACTION			0x00000000
+#define CS_CMD_CMD_START_RESTART		0x00000001
+#define CS_CMD_CMD_STOP				0x00000002
+#define CS_EN_SHIFT				0
+#define CS_EN_CMD_ENABLE_BSC			0x00000001
+
+#define TIM_OFFSET				0x00000024
+#define TIM_PRESCALE_SHIFT			6
+#define TIM_P_SHIFT				3
+#define TIM_NO_DIV_SHIFT			2
+#define TIM_DIV_SHIFT				0
+
+#define DAT_OFFSET				0x00000028
+
+#define TOUT_OFFSET				0x0000002c
+
+#define TXFCR_OFFSET				0x0000003c
+#define TXFCR_FIFO_FLUSH_MASK			0x00000080
+#define TXFCR_FIFO_EN_MASK			0x00000040
+
+#define IER_OFFSET				0x00000044
+#define IER_READ_COMPLETE_INT_MASK		0x00000010
+#define IER_I2C_INT_EN_MASK			0x00000008
+#define IER_FIFO_INT_EN_MASK			0x00000002
+#define IER_NOACK_EN_MASK			0x00000001
+
+#define ISR_OFFSET				0x00000048
+#define ISR_RESERVED_MASK			0xffffff60
+#define ISR_CMDBUSY_MASK			0x00000080
+#define ISR_READ_COMPLETE_MASK			0x00000010
+#define ISR_SES_DONE_MASK			0x00000008
+#define ISR_ERR_MASK				0x00000004
+#define ISR_TXFIFOEMPTY_MASK			0x00000002
+#define ISR_NOACK_MASK				0x00000001
+
+#define CLKEN_OFFSET				0x0000004C
+#define CLKEN_AUTOSENSE_OFF_MASK		0x00000080
+#define CLKEN_M_SHIFT				4
+#define CLKEN_N_SHIFT				1
+#define CLKEN_CLKEN_MASK			0x00000001
+
+#define FIFO_STATUS_OFFSET			0x00000054
+#define FIFO_STATUS_RXFIFO_EMPTY_MASK		0x00000004
+#define FIFO_STATUS_TXFIFO_EMPTY_MASK		0x00000010
+
+#define HSTIM_OFFSET				0x00000058
+#define HSTIM_HS_MODE_MASK			0x00008000
+#define HSTIM_HS_HOLD_SHIFT			10
+#define HSTIM_HS_HIGH_PHASE_SHIFT		5
+#define HSTIM_HS_SETUP_SHIFT			0
+
+#define PADCTL_OFFSET				0x0000005c
+#define PADCTL_PAD_OUT_EN_MASK			0x00000004
+
+#define RXFCR_OFFSET				0x00000068
+#define RXFCR_NACK_EN_SHIFT			7
+#define RXFCR_READ_COUNT_SHIFT			0
+#define RXFIFORDOUT_OFFSET			0x0000006c
+
+/* Locally used constants */
+#define MAX_RX_FIFO_SIZE		64U /* bytes */
+#define MAX_TX_FIFO_SIZE		64U /* bytes */
+
+#define STD_EXT_CLK_FREQ		13000000UL
+#define HS_EXT_CLK_FREQ			104000000UL
+
+#define MASTERCODE			0x08 /* Mastercodes are 0000_1xxxb */
+
+#define I2C_TIMEOUT			100 /* msecs */
+
+/* Operations that can be commanded to the controller */
+enum bcm_kona_cmd_t {
+	BCM_CMD_NOACTION = 0,
+	BCM_CMD_START,
+	BCM_CMD_RESTART,
+	BCM_CMD_STOP,
+};
+
+enum bus_speed_index {
+	BCM_SPD_100K = 0,
+	BCM_SPD_400K,
+	BCM_SPD_1MHZ,
+};
+
+enum hs_bus_speed_index {
+	BCM_SPD_3P4MHZ = 0,
+};
+
+/* Internal divider settings for standard mode, fast mode and fast mode plus */
+struct bus_speed_cfg {
+	uint8_t time_m;		/* Number of cycles for setup time */
+	uint8_t time_n;		/* Number of cycles for hold time */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+/* Internal divider settings for high-speed mode */
+struct hs_bus_speed_cfg {
+	uint8_t hs_hold;	/* Number of clock cycles SCL stays low until
+				   the end of bit period */
+	uint8_t hs_high_phase;	/* Number of clock cycles SCL stays high
+				   before it falls */
+	uint8_t hs_setup;	/* Number of clock cycles SCL stays low
+				   before it rises  */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+static const struct bus_speed_cfg std_cfg_table[] = {
+	[BCM_SPD_100K] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
+	[BCM_SPD_400K] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
+	[BCM_SPD_1MHZ] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
+};
+
+static const struct hs_bus_speed_cfg hs_cfg_table[] = {
+	[BCM_SPD_3P4MHZ] = {0x01, 0x08, 0x14, 0x00, 0x06, 0x01, 0x00},
+};
+
+struct bcm_kona_i2c_dev {
+	struct device *device;
+
+	void __iomem *base;
+	int irq;
+	struct clk *external_clk;
+
+	struct i2c_adapter adapter;
+
+	struct completion done;
+
+	const struct bus_speed_cfg *std_cfg;
+	const struct hs_bus_speed_cfg *hs_cfg;
+};
+
+static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
+					  enum bcm_kona_cmd_t cmd)
+{
+	dev_dbg(dev->device, "%s, %d\n", __func__, cmd);
+
+	switch (cmd) {
+	case BCM_CMD_NOACTION:
+		writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_START:
+		writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_RESTART:
+		writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_STOP:
+		writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	default:
+		dev_err(dev->device, "Unknown command %d\n", cmd);
+	}
+}
+
+static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
+{
+	struct bcm_kona_i2c_dev *dev = devid;
+	uint32_t status = readl(dev->base + ISR_OFFSET);
+
+	if ((status & ~ISR_RESERVED_MASK) == 0)
+		return IRQ_NONE;
+
+	/* Must flush the TX FIFO when NAK detected */
+	if (status & ISR_NOACK_MASK)
+		writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+		       dev->base + TXFCR_OFFSET);
+
+	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
+	complete(&dev->done);
+
+	return IRQ_HANDLED;
+}
+
+/* Wait for ISR_CMDBUSY_MASK to go low before writing to CS, DAT, or RCD */
+static int bcm_kona_i2c_wait_if_busy(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
+
+	while (readl(dev->base + ISR_OFFSET) & ISR_CMDBUSY_MASK)
+		if (time_after(jiffies, timeout)) {
+			dev_err(dev->device, "CMDBUSY timeout\n");
+			return -ETIMEDOUT;
+		}
+
+	return 0;
+}
+
+/* Send command to I2C bus */
+static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
+				 enum bcm_kona_cmd_t cmd)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the command */
+	reinit_completion(&dev->done);
+
+	/* Send the command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);
+
+	/* Wait for transaction to finish or timeout */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "controller timed out\n");
+		rc = -ETIMEDOUT;
+	}
+
+	/* Clear command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	return rc;
+}
+
+/* Read a single RX FIFO worth of data from the i2c bus */
+static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
+					 uint8_t *buf, unsigned int len,
+					 unsigned int last_byte_nak)
+{
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Mark as incomplete before starting the RX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the read complete interrupt */
+	writel(IER_READ_COMPLETE_INT_MASK, dev->base + IER_OFFSET);
+
+	/* Start the RX FIFO */
+	writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
+	       (len << RXFCR_READ_COUNT_SHIFT),
+		dev->base + RXFCR_OFFSET);
+
+	/* Wait for FIFO read to complete */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "RX FIFO time out\n");
+		return -EREMOTEIO;
+	}
+
+	/* Read data from FIFO */
+	for (; len > 0; len--, buf++)
+		*buf = readl(dev->base + RXFIFORDOUT_OFFSET);
+
+	return 0;
+}
+
+/* Read any amount of data using the RX FIFO from the i2c bus */
+static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
+				  struct i2c_msg *msg)
+{
+	unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
+	unsigned int last_byte_nak = 0;
+	unsigned int bytes_read = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_read < msg->len) {
+		if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
+			last_byte_nak = 1; /* NAK last byte of transfer */
+			bytes_to_read = msg->len - bytes_read;
+		}
+
+		rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
+						   last_byte_nak);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_read += bytes_to_read;
+		tmp_buf += bytes_to_read;
+	}
+
+	return 0;
+}
+
+/* Write a single byte of data to the i2c bus */
+static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
+				   unsigned int nak_expected)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int nak_received;
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Clear pending session done interrupt */
+	writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the data */
+	reinit_completion(&dev->done);
+
+	/* Send one byte of data */
+	writel(data, dev->base + DAT_OFFSET);
+
+	/* Wait for byte to be written */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_dbg(dev->device, "controller timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;
+
+	if (nak_received ^ nak_expected) {
+		dev_dbg(dev->device, "unexpected NAK/ACK\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Write a single TX FIFO worth of data to the i2c bus */
+static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
+					  uint8_t *buf, unsigned int len)
+{
+	int k;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int fifo_status;
+
+	/* Mark as incomplete before sending data to the TX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the fifo empty and nak interrupt */
+	writel(IER_FIFO_INT_EN_MASK | IER_NOACK_EN_MASK,
+	       dev->base + IER_OFFSET);
+
+	/* Disable IRQ to load a FIFO worth of data without interruption */
+	disable_irq(dev->irq);
+
+	/* Write data into FIFO */
+	for (k = 0; k < len; k++)
+		writel(buf[k], (dev->base + DAT_OFFSET));
+
+	/* Enable IRQ now that data has been loaded */
+	enable_irq(dev->irq);
+
+	/* Wait for FIFO to empty */
+	do {
+		time_left = wait_for_completion_timeout(&dev->done, time_left);
+		fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
+	} while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Check if there was a NAK */
+	if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
+		dev_err(dev->device, "unexpected NAK\n");
+		return -EREMOTEIO;
+	}
+
+	/* Check if a timeout occured */
+	if (!time_left) {
+		dev_err(dev->device, "completion timed out\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+/* Write any amount of data using TX FIFO to the i2c bus */
+static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
+				   struct i2c_msg *msg)
+{
+	unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
+	unsigned int bytes_written = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_written < msg->len) {
+		if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
+			bytes_to_write = msg->len - bytes_written;
+
+		rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
+						    bytes_to_write);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_written += bytes_to_write;
+		tmp_buf += bytes_to_write;
+	}
+
+	return 0;
+}
+
+/* Send i2c address */
+static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
+				     struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		/* First byte is 11110XX0 where XX is upper 2 bits */
+		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		/* Second byte is the remaining 8 bits */
+		addr = msg->addr & 0xFF;
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		if (msg->flags & I2C_M_RD) {
+			/* For read, send restart command */
+			if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
+				return -EREMOTEIO;
+
+			/* Then re-send the first byte with the read bit set */
+			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+				return -EREMOTEIO;
+		}
+	} else {
+		addr = i2c_8bit_addr_from_msg(msg);
+
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+
+	writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->std_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->std_cfg->time_div	<< TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
+	       (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
+	       CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing_hs(struct bcm_kona_i2c_dev *dev)
+{
+	writel((dev->hs_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->hs_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->hs_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->hs_cfg->time_div << TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->hs_cfg->hs_hold << HSTIM_HS_HOLD_SHIFT) |
+	       (dev->hs_cfg->hs_high_phase << HSTIM_HS_HIGH_PHASE_SHIFT) |
+	       (dev->hs_cfg->hs_setup << HSTIM_HS_SETUP_SHIFT),
+	       dev->base + HSTIM_OFFSET);
+
+	writel(readl(dev->base + HSTIM_OFFSET) | HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+}
+
+static int bcm_kona_i2c_switch_to_hs(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Send mastercode at standard speed */
+	rc = bcm_kona_i2c_write_byte(dev, MASTERCODE, 1);
+	if (rc < 0) {
+		pr_err("High speed handshake failed\n");
+		return rc;
+	}
+
+	/* Configure external clock to higher frequency */
+	rc = clk_set_rate(dev->external_clk, HS_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing_hs(dev);
+
+	/* Send a restart command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+	if (rc < 0)
+		dev_err(dev->device, "High speed restart command failed\n");
+
+	return rc;
+}
+
+static int bcm_kona_i2c_switch_to_std(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Configure external clock to lower frequency */
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+	}
+
+	return rc;
+}
+
+/* Master transfer function */
+static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter,
+			     struct i2c_msg msgs[], int num)
+{
+	struct bcm_kona_i2c_dev *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int rc = 0;
+	int i;
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "%s: peri clock enable failed. err %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Enable pad output */
+	writel(0, dev->base + PADCTL_OFFSET);
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Send start command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
+	if (rc < 0) {
+		dev_err(dev->device, "Start command failed rc = %d\n", rc);
+		goto xfer_disable_pad;
+	}
+
+	/* Switch to high speed if applicable */
+	if (dev->hs_cfg) {
+		rc = bcm_kona_i2c_switch_to_hs(dev);
+		if (rc < 0)
+			goto xfer_send_stop;
+	}
+
+	/* Loop through all messages */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+
+		/* Send restart for subsequent messages */
+		if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
+			rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"restart cmd failed rc = %d\n", rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Send slave address */
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			rc = bcm_kona_i2c_do_addr(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"NAK from addr %2.2x msg#%d rc = %d\n",
+					pmsg->addr, i, rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Perform data transfer */
+		if (pmsg->flags & I2C_M_RD) {
+			rc = bcm_kona_i2c_read_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "read failure\n");
+				goto xfer_send_stop;
+			}
+		} else {
+			rc = bcm_kona_i2c_write_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "write failure");
+				goto xfer_send_stop;
+			}
+		}
+	}
+
+	rc = num;
+
+xfer_send_stop:
+	/* Send a STOP command */
+	bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);
+
+	/* Return from high speed if applicable */
+	if (dev->hs_cfg) {
+		int hs_rc = bcm_kona_i2c_switch_to_std(dev);
+
+		if (hs_rc)
+			rc = hs_rc;
+	}
+
+xfer_disable_pad:
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Stop internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static uint32_t bcm_kona_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+	    I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm bcm_algo = {
+	.master_xfer = bcm_kona_i2c_xfer,
+	.functionality = bcm_kona_i2c_functionality,
+};
+
+static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned int bus_speed;
+	int ret = of_property_read_u32(dev->device->of_node, "clock-frequency",
+				       &bus_speed);
+	if (ret < 0) {
+		dev_err(dev->device, "missing clock-frequency property\n");
+		return -ENODEV;
+	}
+
+	switch (bus_speed) {
+	case 100000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		break;
+	case 400000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
+		break;
+	case 1000000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
+		break;
+	case 3400000:
+		/* Send mastercode at 100k */
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
+		break;
+	default:
+		pr_err("%d hz bus speed not supported\n", bus_speed);
+		pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bcm_kona_i2c_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct bcm_kona_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *iomem;
+
+	/* Allocate memory for private data structure */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	dev->device = &pdev->dev;
+	init_completion(&dev->done);
+
+	/* Map hardware registers */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(dev->device, iomem);
+	if (IS_ERR(dev->base))
+		return -ENOMEM;
+
+	/* Get and enable external clock */
+	dev->external_clk = devm_clk_get(dev->device, NULL);
+	if (IS_ERR(dev->external_clk)) {
+		dev_err(dev->device, "couldn't get clock\n");
+		return -ENODEV;
+	}
+
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "couldn't enable clock\n");
+		return rc;
+	}
+
+	/* Parse bus speed */
+	rc = bcm_kona_i2c_assign_bus_speed(dev);
+	if (rc)
+		goto probe_disable_clk;
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Configure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Disable timeout */
+	writel(0, dev->base + TOUT_OFFSET);
+
+	/* Enable autosense */
+	bcm_kona_i2c_enable_autosense(dev);
+
+	/* Enable TX FIFO */
+	writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+	       dev->base + TXFCR_OFFSET);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Clear all pending interrupts */
+	writel(ISR_CMDBUSY_MASK |
+	       ISR_READ_COMPLETE_MASK |
+	       ISR_SES_DONE_MASK |
+	       ISR_ERR_MASK |
+	       ISR_TXFIFOEMPTY_MASK |
+	       ISR_NOACK_MASK,
+	       dev->base + ISR_OFFSET);
+
+	/* Get the interrupt number */
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq < 0) {
+		dev_err(dev->device, "no irq resource\n");
+		rc = -ENODEV;
+		goto probe_disable_clk;
+	}
+
+	/* register the ISR handler */
+	rc = devm_request_irq(&pdev->dev, dev->irq, bcm_kona_i2c_isr,
+			      IRQF_SHARED, pdev->name, dev);
+	if (rc) {
+		dev_err(dev->device, "failed to request irq %i\n", dev->irq);
+		goto probe_disable_clk;
+	}
+
+	/* Enable the controller but leave it idle */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Disable internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	/* Disable external clock */
+	clk_disable_unprepare(dev->external_clk);
+
+	/* Add the i2c adapter */
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	strlcpy(adap->name, "Broadcom I2C adapter", sizeof(adap->name));
+	adap->algo = &bcm_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	rc = i2c_add_adapter(adap);
+	if (rc)
+		return rc;
+
+	dev_info(dev->device, "device registered successfully\n");
+
+	return 0;
+
+probe_disable_clk:
+	bcm_kona_i2c_disable_clock(dev);
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static int bcm_kona_i2c_remove(struct platform_device *pdev)
+{
+	struct bcm_kona_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_i2c_of_match[] = {
+	{.compatible = "brcm,kona-i2c",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);
+
+static struct platform_driver bcm_kona_i2c_driver = {
+	.driver = {
+		   .name = "bcm-kona-i2c",
+		   .of_match_table = bcm_kona_i2c_of_match,
+		   },
+	.probe = bcm_kona_i2c_probe,
+	.remove = bcm_kona_i2c_remove,
+};
+module_platform_driver(bcm_kona_i2c_driver);
+
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona I2C Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm2835.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm2835.c
new file mode 100644
index 0000000..4d19254
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bcm2835.c
@@ -0,0 +1,439 @@
+/*
+ * BCM2835 master mode driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define BCM2835_I2C_C		0x0
+#define BCM2835_I2C_S		0x4
+#define BCM2835_I2C_DLEN	0x8
+#define BCM2835_I2C_A		0xc
+#define BCM2835_I2C_FIFO	0x10
+#define BCM2835_I2C_DIV		0x14
+#define BCM2835_I2C_DEL		0x18
+#define BCM2835_I2C_CLKT	0x1c
+
+#define BCM2835_I2C_C_READ	BIT(0)
+#define BCM2835_I2C_C_CLEAR	BIT(4) /* bits 4 and 5 both clear */
+#define BCM2835_I2C_C_ST	BIT(7)
+#define BCM2835_I2C_C_INTD	BIT(8)
+#define BCM2835_I2C_C_INTT	BIT(9)
+#define BCM2835_I2C_C_INTR	BIT(10)
+#define BCM2835_I2C_C_I2CEN	BIT(15)
+
+#define BCM2835_I2C_S_TA	BIT(0)
+#define BCM2835_I2C_S_DONE	BIT(1)
+#define BCM2835_I2C_S_TXW	BIT(2)
+#define BCM2835_I2C_S_RXR	BIT(3)
+#define BCM2835_I2C_S_TXD	BIT(4)
+#define BCM2835_I2C_S_RXD	BIT(5)
+#define BCM2835_I2C_S_TXE	BIT(6)
+#define BCM2835_I2C_S_RXF	BIT(7)
+#define BCM2835_I2C_S_ERR	BIT(8)
+#define BCM2835_I2C_S_CLKT	BIT(9)
+#define BCM2835_I2C_S_LEN	BIT(10) /* Fake bit for SW error reporting */
+
+#define BCM2835_I2C_FEDL_SHIFT	16
+#define BCM2835_I2C_REDL_SHIFT	0
+
+#define BCM2835_I2C_CDIV_MIN	0x0002
+#define BCM2835_I2C_CDIV_MAX	0xFFFE
+
+struct bcm2835_i2c_dev {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *clk;
+	int irq;
+	u32 bus_clk_rate;
+	struct i2c_adapter adapter;
+	struct completion completion;
+	struct i2c_msg *curr_msg;
+	int num_msgs;
+	u32 msg_err;
+	u8 *msg_buf;
+	size_t msg_buf_remaining;
+};
+
+static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev,
+				      u32 reg, u32 val)
+{
+	writel(val, i2c_dev->regs + reg);
+}
+
+static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg)
+{
+	return readl(i2c_dev->regs + reg);
+}
+
+static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev)
+{
+	u32 divider, redl, fedl;
+
+	divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk),
+			       i2c_dev->bus_clk_rate);
+	/*
+	 * Per the datasheet, the register is always interpreted as an even
+	 * number, by rounding down. In other words, the LSB is ignored. So,
+	 * if the LSB is set, increment the divider to avoid any issue.
+	 */
+	if (divider & 1)
+		divider++;
+	if ((divider < BCM2835_I2C_CDIV_MIN) ||
+	    (divider > BCM2835_I2C_CDIV_MAX)) {
+		dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n");
+		return -EINVAL;
+	}
+
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
+
+	/*
+	 * Number of core clocks to wait after falling edge before
+	 * outputting the next data bit.  Note that both FEDL and REDL
+	 * can't be greater than CDIV/2.
+	 */
+	fedl = max(divider / 16, 1u);
+
+	/*
+	 * Number of core clocks to wait after rising edge before
+	 * sampling the next incoming data bit.
+	 */
+	redl = max(divider / 4, 1u);
+
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL,
+			   (fedl << BCM2835_I2C_FEDL_SHIFT) |
+			   (redl << BCM2835_I2C_REDL_SHIFT));
+	return 0;
+}
+
+static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev)
+{
+	u32 val;
+
+	while (i2c_dev->msg_buf_remaining) {
+		val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+		if (!(val & BCM2835_I2C_S_TXD))
+			break;
+		bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_FIFO,
+				   *i2c_dev->msg_buf);
+		i2c_dev->msg_buf++;
+		i2c_dev->msg_buf_remaining--;
+	}
+}
+
+static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
+{
+	u32 val;
+
+	while (i2c_dev->msg_buf_remaining) {
+		val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+		if (!(val & BCM2835_I2C_S_RXD))
+			break;
+		*i2c_dev->msg_buf = bcm2835_i2c_readl(i2c_dev,
+						      BCM2835_I2C_FIFO);
+		i2c_dev->msg_buf++;
+		i2c_dev->msg_buf_remaining--;
+	}
+}
+
+/*
+ * Repeated Start Condition (Sr)
+ * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it
+ * talks about reading from a slave with 10 bit address. This is achieved by
+ * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then
+ * issue a read.
+ * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the
+ * firmware actually does it using polling and says that it's a workaround for
+ * a problem in the state machine.
+ * It turns out that it is possible to use the TXW interrupt to know when the
+ * transfer is active, provided the FIFO has not been prefilled.
+ */
+
+static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev)
+{
+	u32 c = BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN;
+	struct i2c_msg *msg = i2c_dev->curr_msg;
+	bool last_msg = (i2c_dev->num_msgs == 1);
+
+	if (!i2c_dev->num_msgs)
+		return;
+
+	i2c_dev->num_msgs--;
+	i2c_dev->msg_buf = msg->buf;
+	i2c_dev->msg_buf_remaining = msg->len;
+
+	if (msg->flags & I2C_M_RD)
+		c |= BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR;
+	else
+		c |= BCM2835_I2C_C_INTT;
+
+	if (last_msg)
+		c |= BCM2835_I2C_C_INTD;
+
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
+}
+
+static void bcm2835_i2c_finish_transfer(struct bcm2835_i2c_dev *i2c_dev)
+{
+	i2c_dev->curr_msg = NULL;
+	i2c_dev->num_msgs = 0;
+
+	i2c_dev->msg_buf = NULL;
+	i2c_dev->msg_buf_remaining = 0;
+}
+
+/*
+ * Note about I2C_C_CLEAR on error:
+ * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in
+ * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through
+ * the state machine to send a NACK and a STOP. Since we're setting CLEAR
+ * without I2CEN, that NACK will be hanging around queued up for next time
+ * we start the engine.
+ */
+
+static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data)
+{
+	struct bcm2835_i2c_dev *i2c_dev = data;
+	u32 val, err;
+
+	val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+
+	err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
+	if (err) {
+		i2c_dev->msg_err = err;
+		goto complete;
+	}
+
+	if (val & BCM2835_I2C_S_DONE) {
+		if (!i2c_dev->curr_msg) {
+			dev_err(i2c_dev->dev, "Got unexpected interrupt (from firmware?)\n");
+		} else if (i2c_dev->curr_msg->flags & I2C_M_RD) {
+			bcm2835_drain_rxfifo(i2c_dev);
+			val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+		}
+
+		if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
+			i2c_dev->msg_err = BCM2835_I2C_S_LEN;
+		else
+			i2c_dev->msg_err = 0;
+		goto complete;
+	}
+
+	if (val & BCM2835_I2C_S_TXW) {
+		if (!i2c_dev->msg_buf_remaining) {
+			i2c_dev->msg_err = val | BCM2835_I2C_S_LEN;
+			goto complete;
+		}
+
+		bcm2835_fill_txfifo(i2c_dev);
+
+		if (i2c_dev->num_msgs && !i2c_dev->msg_buf_remaining) {
+			i2c_dev->curr_msg++;
+			bcm2835_i2c_start_transfer(i2c_dev);
+		}
+
+		return IRQ_HANDLED;
+	}
+
+	if (val & BCM2835_I2C_S_RXR) {
+		if (!i2c_dev->msg_buf_remaining) {
+			i2c_dev->msg_err = val | BCM2835_I2C_S_LEN;
+			goto complete;
+		}
+
+		bcm2835_drain_rxfifo(i2c_dev);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+
+complete:
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, BCM2835_I2C_S_CLKT |
+			   BCM2835_I2C_S_ERR | BCM2835_I2C_S_DONE);
+	complete(&i2c_dev->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+			    int num)
+{
+	struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	unsigned long time_left;
+	int i, ret;
+
+	for (i = 0; i < (num - 1); i++)
+		if (msgs[i].flags & I2C_M_RD) {
+			dev_warn_once(i2c_dev->dev,
+				      "only one read message supported, has to be last\n");
+			return -EOPNOTSUPP;
+		}
+
+	ret = bcm2835_i2c_set_divider(i2c_dev);
+	if (ret)
+		return ret;
+
+	i2c_dev->curr_msg = msgs;
+	i2c_dev->num_msgs = num;
+	reinit_completion(&i2c_dev->completion);
+
+	bcm2835_i2c_start_transfer(i2c_dev);
+
+	time_left = wait_for_completion_timeout(&i2c_dev->completion,
+						adap->timeout);
+
+	bcm2835_i2c_finish_transfer(i2c_dev);
+
+	if (!time_left) {
+		bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
+				   BCM2835_I2C_C_CLEAR);
+		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	if (!i2c_dev->msg_err)
+		return num;
+
+	dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
+
+	if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
+		return -EREMOTEIO;
+
+	return -EIO;
+}
+
+static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm bcm2835_i2c_algo = {
+	.master_xfer	= bcm2835_i2c_xfer,
+	.functionality	= bcm2835_i2c_func,
+};
+
+/*
+ * This HW was reported to have problems with clock stretching:
+ * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
+ * https://www.raspberrypi.org/forums/viewtopic.php?p=146272
+ */
+static const struct i2c_adapter_quirks bcm2835_i2c_quirks = {
+	.flags = I2C_AQ_NO_CLK_STRETCH,
+};
+
+static int bcm2835_i2c_probe(struct platform_device *pdev)
+{
+	struct bcm2835_i2c_dev *i2c_dev;
+	struct resource *mem, *irq;
+	int ret;
+	struct i2c_adapter *adap;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, i2c_dev);
+	i2c_dev->dev = &pdev->dev;
+	init_completion(&i2c_dev->completion);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c_dev->regs))
+		return PTR_ERR(i2c_dev->regs);
+
+	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c_dev->clk)) {
+		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				   &i2c_dev->bus_clk_rate);
+	if (ret < 0) {
+		dev_warn(&pdev->dev,
+			 "Could not read clock-frequency property\n");
+		i2c_dev->bus_clk_rate = 100000;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return -ENODEV;
+	}
+	i2c_dev->irq = irq->start;
+
+	ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
+			  dev_name(&pdev->dev), i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return -ENODEV;
+	}
+
+	adap = &i2c_dev->adapter;
+	i2c_set_adapdata(adap, i2c_dev);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DEPRECATED;
+	strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
+	adap->algo = &bcm2835_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+	adap->quirks = &bcm2835_i2c_quirks;
+
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		free_irq(i2c_dev->irq, i2c_dev);
+
+	return ret;
+}
+
+static int bcm2835_i2c_remove(struct platform_device *pdev)
+{
+	struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	free_irq(i2c_dev->irq, i2c_dev);
+	i2c_del_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_i2c_of_match[] = {
+	{ .compatible = "brcm,bcm2835-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match);
+
+static struct platform_driver bcm2835_i2c_driver = {
+	.probe		= bcm2835_i2c_probe,
+	.remove		= bcm2835_i2c_remove,
+	.driver		= {
+		.name	= "i2c-bcm2835",
+		.of_match_table = bcm2835_i2c_of_match,
+	},
+};
+module_platform_driver(bcm2835_i2c_driver);
+
+MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>");
+MODULE_DESCRIPTION("BCM2835 I2C bus adapter");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-bcm2835");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bfin-twi.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bfin-twi.c
new file mode 100644
index 0000000..ff33431
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-bfin-twi.c
@@ -0,0 +1,737 @@
+/*
+ * Blackfin On-Chip Two Wire Interface Driver
+ *
+ * Copyright 2005-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/portmux.h>
+#include <asm/bfin_twi.h>
+
+/* SMBus mode*/
+#define TWI_I2C_MODE_STANDARD		1
+#define TWI_I2C_MODE_STANDARDSUB	2
+#define TWI_I2C_MODE_COMBINED		3
+#define TWI_I2C_MODE_REPEAT		4
+
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
+					unsigned short twi_int_status)
+{
+	unsigned short mast_stat = read_MASTER_STAT(iface);
+
+	if (twi_int_status & XMTSERV) {
+		if (iface->writeNum <= 0) {
+			/* start receive immediately after complete sending in
+			 * combine mode.
+			 */
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | MDIR);
+			else if (iface->manual_stop)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags &
+					I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) |
+						MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) &
+						~MDIR);
+			}
+		}
+		/* Transmit next data */
+		while (iface->writeNum > 0 &&
+			(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
+			write_XMT_DATA8(iface, *(iface->transPtr++));
+			iface->writeNum--;
+		}
+	}
+	if (twi_int_status & RCVSERV) {
+		while (iface->readNum > 0 &&
+			(read_FIFO_STAT(iface) & RCVSTAT)) {
+			/* Receive next data */
+			*(iface->transPtr) = read_RCV_DATA8(iface);
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+				/* Change combine mode into sub mode after
+				 * read first data.
+				 */
+				iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+				/* Get read number from first byte in block
+				 * combine mode.
+				 */
+				if (iface->readNum == 1 && iface->manual_stop)
+					iface->readNum = *iface->transPtr + 1;
+			}
+			iface->transPtr++;
+			iface->readNum--;
+		}
+
+		if (iface->readNum == 0) {
+			if (iface->manual_stop) {
+				/* Temporary workaround to avoid possible bus stall -
+				 * Flush FIFO before issuing the STOP condition
+				 */
+				read_RCV_DATA16(iface);
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+					iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) | MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) & ~MDIR);
+			}
+		}
+	}
+	if (twi_int_status & MERR) {
+		write_INT_MASK(iface, 0);
+		write_MASTER_STAT(iface, 0x3e);
+		write_MASTER_CTL(iface, 0);
+		iface->result = -EIO;
+
+		if (mast_stat & LOSTARB)
+			dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
+		if (mast_stat & ANAK)
+			dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
+		if (mast_stat & DNAK)
+			dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
+		if (mast_stat & BUFRDERR)
+			dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
+		if (mast_stat & BUFWRERR)
+			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
+
+		/* Faulty slave devices, may drive SDA low after a transfer
+		 * finishes. To release the bus this code generates up to 9
+		 * extra clocks until SDA is released.
+		 */
+
+		if (read_MASTER_STAT(iface) & SDASEN) {
+			int cnt = 9;
+			do {
+				write_MASTER_CTL(iface, SCLOVR);
+				udelay(6);
+				write_MASTER_CTL(iface, 0);
+				udelay(6);
+			} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
+
+			write_MASTER_CTL(iface, SDAOVR | SCLOVR);
+			udelay(6);
+			write_MASTER_CTL(iface, SDAOVR);
+			udelay(6);
+			write_MASTER_CTL(iface, 0);
+		}
+
+		/* If it is a quick transfer, only address without data,
+		 * not an err, return 1.
+		 */
+		if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
+			iface->transPtr == NULL &&
+			(twi_int_status & MCOMP) && (mast_stat & DNAK))
+			iface->result = 1;
+
+		complete(&iface->complete);
+		return;
+	}
+	if (twi_int_status & MCOMP) {
+		if (twi_int_status & (XMTSERV | RCVSERV) &&
+			(read_MASTER_CTL(iface) & MEN) == 0 &&
+			(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
+			iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
+			iface->result = -1;
+			write_INT_MASK(iface, 0);
+			write_MASTER_CTL(iface, 0);
+		} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+			if (iface->readNum == 0) {
+				/* set the read number to 1 and ask for manual
+				 * stop in block combine mode
+				 */
+				iface->readNum = 1;
+				iface->manual_stop = 1;
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | (0xff << 6));
+			} else {
+				/* set the readd number in other
+				 * combine mode.
+				 */
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+					(iface->readNum << 6));
+			}
+			/* remove restart bit and enable master receive */
+			write_MASTER_CTL(iface,
+				read_MASTER_CTL(iface) & ~RSTART);
+		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+			iface->cur_msg++;
+			iface->transPtr = iface->pmsg[iface->cur_msg].buf;
+			iface->writeNum = iface->readNum =
+				iface->pmsg[iface->cur_msg].len;
+			/* Set Transmit device address */
+			write_MASTER_ADDR(iface,
+				iface->pmsg[iface->cur_msg].addr);
+			if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
+				iface->read_write = I2C_SMBUS_READ;
+			else {
+				iface->read_write = I2C_SMBUS_WRITE;
+				/* Transmit first data */
+				if (iface->writeNum > 0) {
+					write_XMT_DATA8(iface,
+						*(iface->transPtr++));
+					iface->writeNum--;
+				}
+			}
+
+			if (iface->pmsg[iface->cur_msg].len <= 255) {
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+					(iface->pmsg[iface->cur_msg].len << 6));
+				iface->manual_stop = 0;
+			} else {
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) |
+					(0xff << 6)));
+				iface->manual_stop = 1;
+			}
+			/* remove restart bit before last message */
+			if (iface->cur_msg + 1 == iface->msg_num)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) & ~RSTART);
+		} else {
+			iface->result = 1;
+			write_INT_MASK(iface, 0);
+			write_MASTER_CTL(iface, 0);
+		}
+		complete(&iface->complete);
+	}
+}
+
+/* Interrupt handler */
+static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
+{
+	struct bfin_twi_iface *iface = dev_id;
+	unsigned long flags;
+	unsigned short twi_int_status;
+
+	spin_lock_irqsave(&iface->lock, flags);
+	while (1) {
+		twi_int_status = read_INT_STAT(iface);
+		if (!twi_int_status)
+			break;
+		/* Clear interrupt status */
+		write_INT_STAT(iface, twi_int_status);
+		bfin_twi_handle_interrupt(iface, twi_int_status);
+	}
+	spin_unlock_irqrestore(&iface->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * One i2c master transfer
+ */
+static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	struct bfin_twi_iface *iface = adap->algo_data;
+	struct i2c_msg *pmsg;
+	int rc = 0;
+
+	if (!(read_CONTROL(iface) & TWI_ENA))
+		return -ENXIO;
+
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
+
+	iface->pmsg = msgs;
+	iface->msg_num = num;
+	iface->cur_msg = 0;
+
+	pmsg = &msgs[0];
+	if (pmsg->flags & I2C_M_TEN) {
+		dev_err(&adap->dev, "10 bits addr not supported!\n");
+		return -EINVAL;
+	}
+
+	if (iface->msg_num > 1)
+		iface->cur_mode = TWI_I2C_MODE_REPEAT;
+	iface->manual_stop = 0;
+	iface->transPtr = pmsg->buf;
+	iface->writeNum = iface->readNum = pmsg->len;
+	iface->result = 0;
+	init_completion(&(iface->complete));
+	/* Set Transmit device address */
+	write_MASTER_ADDR(iface, pmsg->addr);
+
+	/* FIFO Initiation. Data in FIFO should be
+	 *  discarded before start a new operation.
+	 */
+	write_FIFO_CTL(iface, 0x3);
+	write_FIFO_CTL(iface, 0);
+
+	if (pmsg->flags & I2C_M_RD)
+		iface->read_write = I2C_SMBUS_READ;
+	else {
+		iface->read_write = I2C_SMBUS_WRITE;
+		/* Transmit first data */
+		if (iface->writeNum > 0) {
+			write_XMT_DATA8(iface, *(iface->transPtr++));
+			iface->writeNum--;
+		}
+	}
+
+	/* clear int stat */
+	write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
+
+	/* Interrupt mask . Enable XMT, RCV interrupt */
+	write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
+
+	if (pmsg->len <= 255)
+		write_MASTER_CTL(iface, pmsg->len << 6);
+	else {
+		write_MASTER_CTL(iface, 0xff << 6);
+		iface->manual_stop = 1;
+	}
+
+	/* Master enable */
+	write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+		(iface->msg_num > 1 ? RSTART : 0) |
+		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "master transfer timeout\n");
+		}
+	}
+
+	if (iface->result == 1)
+		rc = iface->cur_msg + 1;
+	else
+		rc = iface->result;
+
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint
+ */
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	return bfin_twi_do_master_xfer(adap, msgs, num);
+}
+
+/*
+ * One I2C SMBus transfer
+ */
+int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	struct bfin_twi_iface *iface = adap->algo_data;
+	int rc = 0;
+
+	if (!(read_CONTROL(iface) & TWI_ENA))
+		return -ENXIO;
+
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
+
+	iface->writeNum = 0;
+	iface->readNum = 0;
+
+	/* Prepare datas & select mode */
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		iface->transPtr = NULL;
+		iface->cur_mode = TWI_I2C_MODE_STANDARD;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (data == NULL)
+			iface->transPtr = NULL;
+		else {
+			if (read_write == I2C_SMBUS_READ)
+				iface->readNum = 1;
+			else
+				iface->writeNum = 1;
+			iface->transPtr = &data->byte;
+		}
+		iface->cur_mode = TWI_I2C_MODE_STANDARD;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 1;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = 1;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = &data->byte;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 2;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = 2;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->word;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		iface->writeNum = 2;
+		iface->readNum = 2;
+		iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		iface->transPtr = (u8 *)&data->word;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 0;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0] + 1;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = data->block;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->block[1];
+		break;
+	default:
+		return -1;
+	}
+
+	iface->result = 0;
+	iface->manual_stop = 0;
+	iface->read_write = read_write;
+	iface->command = command;
+	init_completion(&(iface->complete));
+
+	/* FIFO Initiation. Data in FIFO should be discarded before
+	 * start a new operation.
+	 */
+	write_FIFO_CTL(iface, 0x3);
+	write_FIFO_CTL(iface, 0);
+
+	/* clear int stat */
+	write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
+
+	/* Set Transmit device address */
+	write_MASTER_ADDR(iface, addr);
+
+	switch (iface->cur_mode) {
+	case TWI_I2C_MODE_STANDARDSUB:
+		write_XMT_DATA8(iface, iface->command);
+		write_INT_MASK(iface, MCOMP | MERR |
+			((iface->read_write == I2C_SMBUS_READ) ?
+			RCVSERV : XMTSERV));
+
+		if (iface->writeNum + 1 <= 255)
+			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
+		else {
+			write_MASTER_CTL(iface, 0xff << 6);
+			iface->manual_stop = 1;
+		}
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+		break;
+	case TWI_I2C_MODE_COMBINED:
+		write_XMT_DATA8(iface, iface->command);
+		write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
+
+		if (iface->writeNum > 0)
+			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
+		else
+			write_MASTER_CTL(iface, 0x1 << 6);
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+		break;
+	default:
+		write_MASTER_CTL(iface, 0);
+		if (size != I2C_SMBUS_QUICK) {
+			/* Don't access xmit data register when this is a
+			 * read operation.
+			 */
+			if (iface->read_write != I2C_SMBUS_READ) {
+				if (iface->writeNum > 0) {
+					write_XMT_DATA8(iface,
+						*(iface->transPtr++));
+					if (iface->writeNum <= 255)
+						write_MASTER_CTL(iface,
+							iface->writeNum << 6);
+					else {
+						write_MASTER_CTL(iface,
+							0xff << 6);
+						iface->manual_stop = 1;
+					}
+					iface->writeNum--;
+				} else {
+					write_XMT_DATA8(iface, iface->command);
+					write_MASTER_CTL(iface, 1 << 6);
+				}
+			} else {
+				if (iface->readNum > 0 && iface->readNum <= 255)
+					write_MASTER_CTL(iface,
+						iface->readNum << 6);
+				else if (iface->readNum > 255) {
+					write_MASTER_CTL(iface, 0xff << 6);
+					iface->manual_stop = 1;
+				} else
+					break;
+			}
+		}
+		write_INT_MASK(iface, MCOMP | MERR |
+			((iface->read_write == I2C_SMBUS_READ) ?
+			RCVSERV : XMTSERV));
+
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+			((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+		break;
+	}
+
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "smbus transfer timeout\n");
+		}
+	}
+
+	rc = (iface->result >= 0) ? 0 : -1;
+
+	return rc;
+}
+
+/*
+ * Generic I2C SMBus transfer entrypoint
+ */
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	return bfin_twi_do_smbus_xfer(adap, addr, flags,
+			read_write, command, size, data);
+}
+
+/*
+ * Return what the adapter supports
+ */
+static u32 bfin_twi_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm bfin_twi_algorithm = {
+	.master_xfer   = bfin_twi_master_xfer,
+	.smbus_xfer    = bfin_twi_smbus_xfer,
+	.functionality = bfin_twi_functionality,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int i2c_bfin_twi_suspend(struct device *dev)
+{
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
+
+	iface->saved_clkdiv = read_CLKDIV(iface);
+	iface->saved_control = read_CONTROL(iface);
+
+	free_irq(iface->irq, iface);
+
+	/* Disable TWI */
+	write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
+
+	return 0;
+}
+
+static int i2c_bfin_twi_resume(struct device *dev)
+{
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
+
+	int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+		0, to_platform_device(dev)->name, iface);
+	if (rc) {
+		dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
+		return -ENODEV;
+	}
+
+	/* Resume TWI interface clock as specified */
+	write_CLKDIV(iface, iface->saved_clkdiv);
+
+	/* Resume TWI */
+	write_CONTROL(iface, iface->saved_control);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
+			 i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+#define I2C_BFIN_TWI_PM_OPS	(&i2c_bfin_twi_pm)
+#else
+#define I2C_BFIN_TWI_PM_OPS	NULL
+#endif
+
+static int i2c_bfin_twi_probe(struct platform_device *pdev)
+{
+	struct bfin_twi_iface *iface;
+	struct i2c_adapter *p_adap;
+	struct resource *res;
+	int rc;
+	unsigned int clkhilow;
+
+	iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
+			GFP_KERNEL);
+	if (!iface) {
+		dev_err(&pdev->dev, "Cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&(iface->lock));
+
+	/* Find and map our resources */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(iface->regs_base)) {
+		dev_err(&pdev->dev, "Cannot map IO\n");
+		return PTR_ERR(iface->regs_base);
+	}
+
+	iface->irq = platform_get_irq(pdev, 0);
+	if (iface->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ specified\n");
+		return -ENOENT;
+	}
+
+	p_adap = &iface->adap;
+	p_adap->nr = pdev->id;
+	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
+	p_adap->algo = &bfin_twi_algorithm;
+	p_adap->algo_data = iface;
+	p_adap->class = I2C_CLASS_DEPRECATED;
+	p_adap->dev.parent = &pdev->dev;
+	p_adap->timeout = 5 * HZ;
+	p_adap->retries = 3;
+
+	rc = peripheral_request_list(
+			dev_get_platdata(&pdev->dev),
+			"i2c-bfin-twi");
+	if (rc) {
+		dev_err(&pdev->dev, "Can't setup pin mux!\n");
+		return -EBUSY;
+	}
+
+	rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
+		0, pdev->name, iface);
+	if (rc) {
+		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+		rc = -ENODEV;
+		goto out_error;
+	}
+
+	/* Set TWI internal clock as 10MHz */
+	write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
+
+	/*
+	 * We will not end up with a CLKDIV=0 because no one will specify
+	 * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
+	 */
+	clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
+
+	/* Set Twi interface clock as specified */
+	write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
+
+	/* Enable TWI */
+	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
+
+	rc = i2c_add_numbered_adapter(p_adap);
+	if (rc < 0)
+		goto out_error;
+
+	platform_set_drvdata(pdev, iface);
+
+	dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
+		"regs_base@%p\n", iface->regs_base);
+
+	return 0;
+
+out_error:
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
+	return rc;
+}
+
+static int i2c_bfin_twi_remove(struct platform_device *pdev)
+{
+	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&(iface->adap));
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
+
+	return 0;
+}
+
+static struct platform_driver i2c_bfin_twi_driver = {
+	.probe		= i2c_bfin_twi_probe,
+	.remove		= i2c_bfin_twi_remove,
+	.driver		= {
+		.name	= "i2c-bfin-twi",
+		.pm	= I2C_BFIN_TWI_PM_OPS,
+	},
+};
+
+static int __init i2c_bfin_twi_init(void)
+{
+	return platform_driver_register(&i2c_bfin_twi_driver);
+}
+
+static void __exit i2c_bfin_twi_exit(void)
+{
+	platform_driver_unregister(&i2c_bfin_twi_driver);
+}
+
+subsys_initcall(i2c_bfin_twi_init);
+module_exit(i2c_bfin_twi_exit);
+
+MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
+MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-bfin-twi");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-brcmstb.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-brcmstb.c
new file mode 100644
index 0000000..78792b4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-brcmstb.c
@@ -0,0 +1,735 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+
+#define N_DATA_REGS					8
+
+/*
+ * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register
+ * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per
+ * data register whereas STB SoCs use 4 byte per data register transfer,
+ * account for this difference in total count per transaction and mask to
+ * use.
+ */
+#define BSC_CNT_REG1_MASK(nb)	(nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0))
+#define BSC_CNT_REG1_SHIFT	0
+
+/* BSC CTL register field definitions */
+#define BSC_CTL_REG_DTF_MASK				0x00000003
+#define BSC_CTL_REG_SCL_SEL_MASK			0x00000030
+#define BSC_CTL_REG_SCL_SEL_SHIFT			4
+#define BSC_CTL_REG_INT_EN_MASK				0x00000040
+#define BSC_CTL_REG_INT_EN_SHIFT			6
+#define BSC_CTL_REG_DIV_CLK_MASK			0x00000080
+
+/* BSC_IIC_ENABLE r/w enable and interrupt field definitions */
+#define BSC_IIC_EN_RESTART_MASK				0x00000040
+#define BSC_IIC_EN_NOSTART_MASK				0x00000020
+#define BSC_IIC_EN_NOSTOP_MASK				0x00000010
+#define BSC_IIC_EN_NOACK_MASK				0x00000004
+#define BSC_IIC_EN_INTRP_MASK				0x00000002
+#define BSC_IIC_EN_ENABLE_MASK				0x00000001
+
+/* BSC_CTLHI control register field definitions */
+#define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK	0x00000080
+#define BSC_CTLHI_REG_DATAREG_SIZE_MASK			0x00000040
+#define BSC_CTLHI_REG_IGNORE_ACK_MASK			0x00000002
+#define BSC_CTLHI_REG_WAIT_DIS_MASK			0x00000001
+
+#define I2C_TIMEOUT					100 /* msecs */
+
+/* Condition mask used for non combined transfer */
+#define COND_RESTART		BSC_IIC_EN_RESTART_MASK
+#define COND_NOSTART		BSC_IIC_EN_NOSTART_MASK
+#define COND_NOSTOP		BSC_IIC_EN_NOSTOP_MASK
+#define COND_START_STOP		(COND_RESTART | COND_NOSTART | COND_NOSTOP)
+
+/* BSC data transfer direction */
+#define DTF_WR_MASK		0x00000000
+#define DTF_RD_MASK		0x00000001
+/* BSC data transfer direction combined format */
+#define DTF_RD_WR_MASK		0x00000002
+#define DTF_WR_RD_MASK		0x00000003
+
+#define INT_ENABLE		true
+#define INT_DISABLE		false
+
+/* BSC block register map structure to cache fields to be written */
+struct bsc_regs {
+	u32	chip_address;           /* slave address */
+	u32	data_in[N_DATA_REGS];   /* tx data buffer*/
+	u32	cnt_reg;		/* rx/tx data length */
+	u32	ctl_reg;		/* control register */
+	u32	iic_enable;		/* xfer enable and status */
+	u32	data_out[N_DATA_REGS];  /* rx data buffer */
+	u32	ctlhi_reg;		/* more control fields */
+	u32	scl_param;		/* reserved */
+};
+
+struct bsc_clk_param {
+	u32 hz;
+	u32 scl_mask;
+	u32 div_mask;
+};
+
+enum bsc_xfer_cmd {
+	CMD_WR,
+	CMD_RD,
+	CMD_WR_NOACK,
+	CMD_RD_NOACK,
+};
+
+static char const *cmd_string[] = {
+	[CMD_WR] = "WR",
+	[CMD_RD] = "RD",
+	[CMD_WR_NOACK] = "WR NOACK",
+	[CMD_RD_NOACK] = "RD NOACK",
+};
+
+enum bus_speeds {
+	SPD_375K,
+	SPD_390K,
+	SPD_187K,
+	SPD_200K,
+	SPD_93K,
+	SPD_97K,
+	SPD_46K,
+	SPD_50K
+};
+
+static const struct bsc_clk_param bsc_clk[] = {
+	[SPD_375K] = {
+		.hz = 375000,
+		.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = 0
+	},
+	[SPD_390K] = {
+		.hz = 390000,
+		.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = 0
+	},
+	[SPD_187K] = {
+		.hz = 187500,
+		.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = 0
+	},
+	[SPD_200K] = {
+		.hz = 200000,
+		.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = 0
+	},
+	[SPD_93K]  = {
+		.hz = 93750,
+		.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
+	},
+	[SPD_97K]  = {
+		.hz = 97500,
+		.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
+	},
+	[SPD_46K]  = {
+		.hz = 46875,
+		.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
+	},
+	[SPD_50K]  = {
+		.hz = 50000,
+		.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
+		.div_mask = BSC_CTL_REG_DIV_CLK_MASK
+	}
+};
+
+struct brcmstb_i2c_dev {
+	struct device *device;
+	void __iomem *base;
+	void __iomem *irq_base;
+	int irq;
+	struct bsc_regs *bsc_regmap;
+	struct i2c_adapter adapter;
+	struct completion done;
+	bool is_suspended;
+	u32 clk_freq_hz;
+	int data_regsz;
+};
+
+/* register accessors for both be and le cpu arch */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __bsc_readl(_reg) ioread32be(_reg)
+#define __bsc_writel(_val, _reg) iowrite32be(_val, _reg)
+#else
+#define __bsc_readl(_reg) ioread32(_reg)
+#define __bsc_writel(_val, _reg) iowrite32(_val, _reg)
+#endif
+
+#define bsc_readl(_dev, _reg)						\
+	__bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg))
+
+#define bsc_writel(_dev, _val, _reg)					\
+	__bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg))
+
+static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev)
+{
+	return (N_DATA_REGS * dev->data_regsz);
+}
+
+static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev)
+{
+	return dev->data_regsz;
+}
+
+static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev,
+					   bool int_en)
+{
+
+	if (int_en)
+		/* Enable BSC  CTL interrupt line */
+		dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK;
+	else
+		/* Disable BSC CTL interrupt line */
+		dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK;
+
+	barrier();
+	bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
+}
+
+static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
+{
+	struct brcmstb_i2c_dev *dev = devid;
+	u32 status_bsc_ctl = bsc_readl(dev, ctl_reg);
+	u32 status_iic_intrp = bsc_readl(dev, iic_enable);
+
+	dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n",
+		status_bsc_ctl, status_iic_intrp);
+
+	if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK))
+		return IRQ_NONE;
+
+	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
+	complete(&dev->done);
+
+	dev_dbg(dev->device, "isr handled");
+	return IRQ_HANDLED;
+}
+
+/* Wait for device to be ready */
+static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
+
+	while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) {
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		cpu_relax();
+	}
+	return 0;
+}
+
+/* i2c xfer completion function, handles both irq and polling mode */
+static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
+{
+	int ret = 0;
+	unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);
+
+	if (dev->irq >= 0) {
+		if (!wait_for_completion_timeout(&dev->done, timeout))
+			ret = -ETIMEDOUT;
+	} else {
+		/* we are in polling mode */
+		u32 bsc_intrp;
+		unsigned long time_left = jiffies + timeout;
+
+		do {
+			bsc_intrp = bsc_readl(dev, iic_enable) &
+				BSC_IIC_EN_INTRP_MASK;
+			if (time_after(jiffies, time_left)) {
+				ret = -ETIMEDOUT;
+				break;
+			}
+			cpu_relax();
+		} while (!bsc_intrp);
+	}
+
+	if (dev->irq < 0 || ret == -ETIMEDOUT)
+		brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
+
+	return ret;
+}
+
+/* Set xfer START/STOP conditions for subsequent transfer */
+static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev,
+				       u32 cond_flag)
+{
+	u32 regval = dev->bsc_regmap->iic_enable;
+
+	dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag;
+}
+
+/* Send I2C request check completion */
+static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
+				enum bsc_xfer_cmd cmd)
+{
+	int rc = 0;
+	struct bsc_regs *pi2creg = dev->bsc_regmap;
+
+	/* Make sure the hardware is ready */
+	rc = brcmstb_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* only if we are in interrupt mode */
+	if (dev->irq >= 0)
+		reinit_completion(&dev->done);
+
+	/* enable BSC CTL interrupt line */
+	brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE);
+
+	/* initiate transfer by setting iic_enable */
+	pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK;
+	bsc_writel(dev, pi2creg->iic_enable, iic_enable);
+
+	/* Wait for transaction to finish or timeout */
+	rc = brcmstb_i2c_wait_for_completion(dev);
+	if (rc) {
+		dev_dbg(dev->device, "intr timeout for cmd %s\n",
+			cmd_string[cmd]);
+		goto cmd_out;
+	}
+
+	if ((CMD_RD || CMD_WR) &&
+	    bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
+		rc = -EREMOTEIO;
+		dev_dbg(dev->device, "controller received NOACK intr for %s\n",
+			cmd_string[cmd]);
+	}
+
+cmd_out:
+	bsc_writel(dev, 0, cnt_reg);
+	bsc_writel(dev, 0, iic_enable);
+
+	return rc;
+}
+
+/* Actual data transfer through the BSC master */
+static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
+				     u8 *buf, unsigned int len,
+				     struct i2c_msg *pmsg)
+{
+	int cnt, byte, i, rc;
+	enum bsc_xfer_cmd cmd;
+	u32 ctl_reg;
+	struct bsc_regs *pi2creg = dev->bsc_regmap;
+	int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
+	int data_regsz = brcmstb_i2c_get_data_regsz(dev);
+
+	/* see if the transaction needs to check NACK conditions */
+	if (no_ack) {
+		cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
+			: CMD_WR_NOACK;
+		pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
+	} else {
+		cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR;
+		pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK;
+	}
+	bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg);
+
+	/* set data transfer direction */
+	ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK;
+	if (cmd == CMD_WR || cmd == CMD_WR_NOACK)
+		pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK;
+	else
+		pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK;
+
+	/* set the read/write length */
+	bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) &
+		   (len << BSC_CNT_REG1_SHIFT), cnt_reg);
+
+	/* Write data into data_in register */
+
+	if (cmd == CMD_WR || cmd == CMD_WR_NOACK) {
+		for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
+			u32 word = 0;
+
+			for (byte = 0; byte < data_regsz; byte++) {
+				word >>= BITS_PER_BYTE;
+				if ((cnt + byte) < len)
+					word |= buf[cnt + byte] <<
+					(BITS_PER_BYTE * (data_regsz - 1));
+			}
+			bsc_writel(dev, word, data_in[i]);
+		}
+	}
+
+	/* Initiate xfer, the function will return on completion */
+	rc = brcmstb_send_i2c_cmd(dev, cmd);
+
+	if (rc != 0) {
+		dev_dbg(dev->device, "%s failure", cmd_string[cmd]);
+		return rc;
+	}
+
+	/* Read data from data_out register */
+	if (cmd == CMD_RD || cmd == CMD_RD_NOACK) {
+		for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
+			u32 data = bsc_readl(dev, data_out[i]);
+
+			for (byte = 0; byte < data_regsz &&
+				     (byte + cnt) < len; byte++) {
+				buf[cnt + byte] = data & 0xff;
+				data >>= BITS_PER_BYTE;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* Write a single byte of data to the i2c bus */
+static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev,
+				       u8 *buf, unsigned int nak_expected)
+{
+	enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK;
+
+	bsc_writel(dev, 1, cnt_reg);
+	bsc_writel(dev, *buf, data_in);
+
+	return brcmstb_send_i2c_cmd(dev, cmd);
+}
+
+/* Send i2c address */
+static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
+			       struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		/* First byte is 11110XX0 where XX is upper 2 bits */
+		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
+		bsc_writel(dev, addr, chip_address);
+
+		/* Second byte is the remaining 8 bits */
+		addr = msg->addr & 0xFF;
+		if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
+			return -EREMOTEIO;
+
+		if (msg->flags & I2C_M_RD) {
+			/* For read, send restart without stop condition */
+			brcmstb_set_i2c_start_stop(dev, COND_RESTART
+						   | COND_NOSTOP);
+			/* Then re-send the first byte with the read bit set */
+			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
+				return -EREMOTEIO;
+
+		}
+	} else {
+		addr = i2c_8bit_addr_from_msg(msg);
+
+		bsc_writel(dev, addr, chip_address);
+	}
+
+	return 0;
+}
+
+/* Master transfer function */
+static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
+			    struct i2c_msg msgs[], int num)
+{
+	struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int rc = 0;
+	int i;
+	int bytes_to_xfer;
+	u8 *tmp_buf;
+	int len = 0;
+	int xfersz = brcmstb_i2c_get_xfersz(dev);
+	u32 cond, cond_per_msg;
+
+	if (dev->is_suspended)
+		return -EBUSY;
+
+	/* Loop through all messages */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		len = pmsg->len;
+		tmp_buf = pmsg->buf;
+
+		dev_dbg(dev->device,
+			"msg# %d/%d flg %x buf %x len %d\n", i,
+			num - 1, pmsg->flags,
+			pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);
+
+		if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
+			cond = ~COND_START_STOP;
+		else
+			cond = COND_RESTART | COND_NOSTOP;
+
+		brcmstb_set_i2c_start_stop(dev, cond);
+
+		/* Send slave address */
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			rc = brcmstb_i2c_do_addr(dev, pmsg);
+			if (rc < 0) {
+				dev_dbg(dev->device,
+					"NACK for addr %2.2x msg#%d rc = %d\n",
+					pmsg->addr, i, rc);
+				goto out;
+			}
+		}
+
+		cond_per_msg = cond;
+
+		/* Perform data transfer */
+		while (len) {
+			bytes_to_xfer = min(len, xfersz);
+
+			if (len <= xfersz) {
+				if (i == (num - 1))
+					cond_per_msg = cond_per_msg &
+						~(COND_RESTART | COND_NOSTOP);
+				else
+					cond_per_msg = cond;
+			} else {
+				cond_per_msg = (cond_per_msg & ~COND_RESTART) |
+					COND_NOSTOP;
+			}
+
+			brcmstb_set_i2c_start_stop(dev, cond_per_msg);
+
+			rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
+						       bytes_to_xfer, pmsg);
+			if (rc < 0)
+				goto out;
+
+			len -=  bytes_to_xfer;
+			tmp_buf += bytes_to_xfer;
+
+			cond_per_msg = COND_NOSTART | COND_NOSTOP;
+		}
+	}
+
+	rc = num;
+out:
+	return rc;
+
+}
+
+static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
+		| I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+static const struct i2c_algorithm brcmstb_i2c_algo = {
+	.master_xfer = brcmstb_i2c_xfer,
+	.functionality = brcmstb_i2c_functionality,
+};
+
+static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev)
+{
+	int i = 0, num_speeds = ARRAY_SIZE(bsc_clk);
+	u32 clk_freq_hz = dev->clk_freq_hz;
+
+	for (i = 0; i < num_speeds; i++) {
+		if (bsc_clk[i].hz == clk_freq_hz) {
+			dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK
+						| BSC_CTL_REG_DIV_CLK_MASK);
+			dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask |
+						     bsc_clk[i].div_mask);
+			bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
+			break;
+		}
+	}
+
+	/* in case we did not get find a valid speed */
+	if (i == num_speeds) {
+		i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >>
+			BSC_CTL_REG_SCL_SEL_SHIFT;
+		dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n",
+			bsc_clk[i].hz);
+	}
+}
+
+static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
+{
+	if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32))
+		/* set 4 byte data in/out xfers  */
+		dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK;
+	else
+		dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK;
+
+	bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg);
+	/* set bus speed */
+	brcmstb_i2c_set_bus_speed(dev);
+}
+
+static int brcmstb_i2c_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct brcmstb_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *iomem;
+	const char *int_name;
+
+	/* Allocate memory for private data structure */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(*dev->bsc_regmap), GFP_KERNEL);
+	if (!dev->bsc_regmap)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	dev->device = &pdev->dev;
+	init_completion(&dev->done);
+
+	/* Map hardware registers */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(dev->device, iomem);
+	if (IS_ERR(dev->base)) {
+		rc = -ENOMEM;
+		goto probe_errorout;
+	}
+
+	rc = of_property_read_string(dev->device->of_node, "interrupt-names",
+				     &int_name);
+	if (rc < 0)
+		int_name = NULL;
+
+	/* Get the interrupt number */
+	dev->irq = platform_get_irq(pdev, 0);
+
+	/* disable the bsc interrupt line */
+	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
+
+	/* register the ISR handler */
+	rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
+			      IRQF_SHARED,
+			      int_name ? int_name : pdev->name,
+			      dev);
+
+	if (rc) {
+		dev_dbg(dev->device, "falling back to polling mode");
+		dev->irq = -1;
+	}
+
+	if (of_property_read_u32(dev->device->of_node,
+				 "clock-frequency", &dev->clk_freq_hz)) {
+		dev_warn(dev->device, "setting clock-frequency@%dHz\n",
+			 bsc_clk[0].hz);
+		dev->clk_freq_hz = bsc_clk[0].hz;
+	}
+
+	/* set the data in/out register size for compatible SoCs */
+	if (of_device_is_compatible(dev->device->of_node,
+				    "brcmstb,brcmper-i2c"))
+		dev->data_regsz = sizeof(u8);
+	else
+		dev->data_regsz = sizeof(u32);
+
+	brcmstb_i2c_set_bsc_reg_defaults(dev);
+
+	/* Add the i2c adapter */
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
+	if (int_name)
+		strlcat(adap->name, int_name, sizeof(adap->name));
+	adap->algo = &brcmstb_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+	rc = i2c_add_adapter(adap);
+	if (rc)
+		goto probe_errorout;
+
+	dev_info(dev->device, "%s@%dhz registered in %s mode\n",
+		 int_name ? int_name : " ", dev->clk_freq_hz,
+		 (dev->irq >= 0) ? "interrupt" : "polling");
+
+	return 0;
+
+probe_errorout:
+	return rc;
+}
+
+static int brcmstb_i2c_remove(struct platform_device *pdev)
+{
+	struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_i2c_suspend(struct device *dev)
+{
+	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_lock_adapter(&i2c_dev->adapter);
+	i2c_dev->is_suspended = true;
+	i2c_unlock_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static int brcmstb_i2c_resume(struct device *dev)
+{
+	struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_lock_adapter(&i2c_dev->adapter);
+	brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
+	i2c_dev->is_suspended = false;
+	i2c_unlock_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
+			 brcmstb_i2c_resume);
+
+static const struct of_device_id brcmstb_i2c_of_match[] = {
+	{.compatible = "brcm,brcmstb-i2c"},
+	{.compatible = "brcm,brcmper-i2c"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);
+
+static struct platform_driver brcmstb_i2c_driver = {
+	.driver = {
+		   .name = "brcmstb-i2c",
+		   .of_match_table = brcmstb_i2c_of_match,
+		   .pm = &brcmstb_i2c_pm,
+		   },
+	.probe = brcmstb_i2c_probe,
+	.remove = brcmstb_i2c_remove,
+};
+module_platform_driver(brcmstb_i2c_driver);
+
+MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Settop I2C Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cadence.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cadence.c
new file mode 100644
index 0000000..b136057
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cadence.c
@@ -0,0 +1,1022 @@
+/*
+ * I2C bus driver for the Cadence I2C controller.
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2 of the License, or (at your option) any
+ * later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+
+/* Register offsets for the I2C device. */
+#define CDNS_I2C_CR_OFFSET		0x00 /* Control Register, RW */
+#define CDNS_I2C_SR_OFFSET		0x04 /* Status Register, RO */
+#define CDNS_I2C_ADDR_OFFSET		0x08 /* I2C Address Register, RW */
+#define CDNS_I2C_DATA_OFFSET		0x0C /* I2C Data Register, RW */
+#define CDNS_I2C_ISR_OFFSET		0x10 /* IRQ Status Register, RW */
+#define CDNS_I2C_XFER_SIZE_OFFSET	0x14 /* Transfer Size Register, RW */
+#define CDNS_I2C_TIME_OUT_OFFSET	0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IER_OFFSET		0x24 /* IRQ Enable Register, WO */
+#define CDNS_I2C_IDR_OFFSET		0x28 /* IRQ Disable Register, WO */
+
+/* Control Register Bit mask definitions */
+#define CDNS_I2C_CR_HOLD		BIT(4) /* Hold Bus bit */
+#define CDNS_I2C_CR_ACK_EN		BIT(3)
+#define CDNS_I2C_CR_NEA			BIT(2)
+#define CDNS_I2C_CR_MS			BIT(1)
+/* Read or Write Master transfer 0 = Transmitter, 1 = Receiver */
+#define CDNS_I2C_CR_RW			BIT(0)
+/* 1 = Auto init FIFO to zeroes */
+#define CDNS_I2C_CR_CLR_FIFO		BIT(6)
+#define CDNS_I2C_CR_DIVA_SHIFT		14
+#define CDNS_I2C_CR_DIVA_MASK		(3 << CDNS_I2C_CR_DIVA_SHIFT)
+#define CDNS_I2C_CR_DIVB_SHIFT		8
+#define CDNS_I2C_CR_DIVB_MASK		(0x3f << CDNS_I2C_CR_DIVB_SHIFT)
+
+/* Status Register Bit mask definitions */
+#define CDNS_I2C_SR_BA		BIT(8)
+#define CDNS_I2C_SR_RXDV	BIT(5)
+
+/*
+ * I2C Address Register Bit mask definitions
+ * Normal addressing mode uses [6:0] bits. Extended addressing mode uses [9:0]
+ * bits. A write access to this register always initiates a transfer if the I2C
+ * is in master mode.
+ */
+#define CDNS_I2C_ADDR_MASK	0x000003FF /* I2C Address Mask */
+
+/*
+ * I2C Interrupt Registers Bit mask definitions
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_I2C_IXR_ARB_LOST		BIT(9)
+#define CDNS_I2C_IXR_RX_UNF		BIT(7)
+#define CDNS_I2C_IXR_TX_OVF		BIT(6)
+#define CDNS_I2C_IXR_RX_OVF		BIT(5)
+#define CDNS_I2C_IXR_SLV_RDY		BIT(4)
+#define CDNS_I2C_IXR_TO			BIT(3)
+#define CDNS_I2C_IXR_NACK		BIT(2)
+#define CDNS_I2C_IXR_DATA		BIT(1)
+#define CDNS_I2C_IXR_COMP		BIT(0)
+
+#define CDNS_I2C_IXR_ALL_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_SLV_RDY | \
+					 CDNS_I2C_IXR_TO | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_IXR_ERR_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_NACK)
+
+#define CDNS_I2C_ENABLED_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_TIMEOUT		msecs_to_jiffies(1000)
+/* timeout for pm runtime autosuspend */
+#define CNDS_I2C_PM_TIMEOUT		1000	/* ms */
+
+#define CDNS_I2C_FIFO_DEPTH		16
+/* FIFO depth at which the DATA interrupt occurs */
+#define CDNS_I2C_DATA_INTR_DEPTH	(CDNS_I2C_FIFO_DEPTH - 2)
+#define CDNS_I2C_MAX_TRANSFER_SIZE	255
+/* Transfer size in multiples of data interrupt depth */
+#define CDNS_I2C_TRANSFER_SIZE	(CDNS_I2C_MAX_TRANSFER_SIZE - 3)
+
+#define DRIVER_NAME		"cdns-i2c"
+
+#define CDNS_I2C_SPEED_MAX	400000
+#define CDNS_I2C_SPEED_DEFAULT	100000
+
+#define CDNS_I2C_DIVA_MAX	4
+#define CDNS_I2C_DIVB_MAX	64
+
+#define CDNS_I2C_TIMEOUT_MAX	0xFF
+
+#define CDNS_I2C_BROKEN_HOLD_BIT	BIT(0)
+
+#define cdns_i2c_readreg(offset)       readl_relaxed(id->membase + offset)
+#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
+
+/**
+ * struct cdns_i2c - I2C device private data structure
+ *
+ * @dev:		Pointer to device structure
+ * @membase:		Base address of the I2C device
+ * @adap:		I2C adapter instance
+ * @p_msg:		Message pointer
+ * @err_status:		Error status in Interrupt Status Register
+ * @xfer_done:		Transfer complete status
+ * @p_send_buf:		Pointer to transmit buffer
+ * @p_recv_buf:		Pointer to receive buffer
+ * @send_count:		Number of bytes still expected to send
+ * @recv_count:		Number of bytes still expected to receive
+ * @curr_recv_count:	Number of bytes to be received in current transfer
+ * @irq:		IRQ number
+ * @input_clk:		Input clock to I2C controller
+ * @i2c_clk:		Maximum I2C clock speed
+ * @bus_hold_flag:	Flag used in repeated start for clearing HOLD bit
+ * @clk:		Pointer to struct clk
+ * @clk_rate_change_nb:	Notifier block for clock rate changes
+ * @quirks:		flag for broken hold bit usage in r1p10
+ */
+struct cdns_i2c {
+	struct device		*dev;
+	void __iomem *membase;
+	struct i2c_adapter adap;
+	struct i2c_msg *p_msg;
+	int err_status;
+	struct completion xfer_done;
+	unsigned char *p_send_buf;
+	unsigned char *p_recv_buf;
+	unsigned int send_count;
+	unsigned int recv_count;
+	unsigned int curr_recv_count;
+	int irq;
+	unsigned long input_clk;
+	unsigned int i2c_clk;
+	unsigned int bus_hold_flag;
+	struct clk *clk;
+	struct notifier_block clk_rate_change_nb;
+	u32 quirks;
+};
+
+struct cdns_platform_data {
+	u32 quirks;
+};
+
+#define to_cdns_i2c(_nb)	container_of(_nb, struct cdns_i2c, \
+					     clk_rate_change_nb)
+
+/**
+ * cdns_i2c_clear_bus_hold - Clear bus hold bit
+ * @id:	Pointer to driver data struct
+ *
+ * Helper to clear the controller's bus hold bit.
+ */
+static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
+{
+	u32 reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	if (reg & CDNS_I2C_CR_HOLD)
+		cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
+}
+
+static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
+{
+	return (hold_wrkaround &&
+		(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
+}
+
+/**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq:	irq number for the I2C device
+ * @ptr:	void pointer to cdns_i2c structure
+ *
+ * This function handles the data interrupt, transfer complete interrupt and
+ * the error interrupts of the I2C device.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+	unsigned int isr_status, avail_bytes, updatetx;
+	unsigned int bytes_to_send;
+	bool hold_quirk;
+	struct cdns_i2c *id = ptr;
+	/* Signal completion only after everything is updated */
+	int done_flag = 0;
+	irqreturn_t status = IRQ_NONE;
+
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/* Handling nack and arbitration lost interrupt */
+	if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
+		done_flag = 1;
+		status = IRQ_HANDLED;
+	}
+
+	/*
+	 * Check if transfer size register needs to be updated again for a
+	 * large data receive operation.
+	 */
+	updatetx = 0;
+	if (id->recv_count > id->curr_recv_count)
+		updatetx = 1;
+
+	hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
+
+	/* When receiving, handle data interrupt and completion interrupt */
+	if (id->p_recv_buf &&
+	    ((isr_status & CDNS_I2C_IXR_COMP) ||
+	     (isr_status & CDNS_I2C_IXR_DATA))) {
+		/* Read data if receive data valid is set */
+		while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
+		       CDNS_I2C_SR_RXDV) {
+			/*
+			 * Clear hold bit that was set for FIFO control if
+			 * RX data left is less than FIFO depth, unless
+			 * repeated start is selected.
+			 */
+			if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) &&
+			    !id->bus_hold_flag)
+				cdns_i2c_clear_bus_hold(id);
+
+			*(id->p_recv_buf)++ =
+				cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+			id->recv_count--;
+			id->curr_recv_count--;
+
+			if (cdns_is_holdquirk(id, hold_quirk))
+				break;
+		}
+
+		/*
+		 * The controller sends NACK to the slave when transfer size
+		 * register reaches zero without considering the HOLD bit.
+		 * This workaround is implemented for large data transfers to
+		 * maintain transfer size non-zero while performing a large
+		 * receive operation.
+		 */
+		if (cdns_is_holdquirk(id, hold_quirk)) {
+			/* wait while fifo is full */
+			while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
+			       (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
+				;
+
+			/*
+			 * Check number of bytes to be received against maximum
+			 * transfer size and update register accordingly.
+			 */
+			if (((int)(id->recv_count) - CDNS_I2C_FIFO_DEPTH) >
+			    CDNS_I2C_TRANSFER_SIZE) {
+				cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+						  CDNS_I2C_XFER_SIZE_OFFSET);
+				id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE +
+						      CDNS_I2C_FIFO_DEPTH;
+			} else {
+				cdns_i2c_writereg(id->recv_count -
+						  CDNS_I2C_FIFO_DEPTH,
+						  CDNS_I2C_XFER_SIZE_OFFSET);
+				id->curr_recv_count = id->recv_count;
+			}
+		} else if (id->recv_count && !hold_quirk &&
+						!id->curr_recv_count) {
+
+			/* Set the slave address in address register*/
+			cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
+
+			if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
+				cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+						CDNS_I2C_XFER_SIZE_OFFSET);
+				id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
+			} else {
+				cdns_i2c_writereg(id->recv_count,
+						CDNS_I2C_XFER_SIZE_OFFSET);
+				id->curr_recv_count = id->recv_count;
+			}
+		}
+
+		/* Clear hold (if not repeated start) and signal completion */
+		if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) {
+			if (!id->bus_hold_flag)
+				cdns_i2c_clear_bus_hold(id);
+			done_flag = 1;
+		}
+
+		status = IRQ_HANDLED;
+	}
+
+	/* When sending, handle transfer complete interrupt */
+	if ((isr_status & CDNS_I2C_IXR_COMP) && !id->p_recv_buf) {
+		/*
+		 * If there is more data to be sent, calculate the
+		 * space available in FIFO and fill with that many bytes.
+		 */
+		if (id->send_count) {
+			avail_bytes = CDNS_I2C_FIFO_DEPTH -
+			    cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+			if (id->send_count > avail_bytes)
+				bytes_to_send = avail_bytes;
+			else
+				bytes_to_send = id->send_count;
+
+			while (bytes_to_send--) {
+				cdns_i2c_writereg(
+					(*(id->p_send_buf)++),
+					 CDNS_I2C_DATA_OFFSET);
+				id->send_count--;
+			}
+		} else {
+			/*
+			 * Signal the completion of transaction and
+			 * clear the hold bus bit if there are no
+			 * further messages to be processed.
+			 */
+			done_flag = 1;
+		}
+		if (!id->send_count && !id->bus_hold_flag)
+			cdns_i2c_clear_bus_hold(id);
+
+		status = IRQ_HANDLED;
+	}
+
+	/* Update the status for errors */
+	id->err_status = isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
+	if (id->err_status)
+		status = IRQ_HANDLED;
+
+	if (done_flag)
+		complete(&id->xfer_done);
+
+	return status;
+}
+
+/**
+ * cdns_i2c_mrecv - Prepare and start a master receive operation
+ * @id:		pointer to the i2c device structure
+ */
+static void cdns_i2c_mrecv(struct cdns_i2c *id)
+{
+	unsigned int ctrl_reg;
+	unsigned int isr_status;
+
+	id->p_recv_buf = id->p_msg->buf;
+	id->recv_count = id->p_msg->len;
+
+	/* Put the controller in master receive mode and clear the FIFO */
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg |= CDNS_I2C_CR_RW | CDNS_I2C_CR_CLR_FIFO;
+
+	if (id->p_msg->flags & I2C_M_RECV_LEN)
+		id->recv_count = I2C_SMBUS_BLOCK_MAX + 1;
+
+	id->curr_recv_count = id->recv_count;
+
+	/*
+	 * Check for the message size against FIFO depth and set the
+	 * 'hold bus' bit if it is greater than FIFO depth.
+	 */
+	if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+		ctrl_reg |= CDNS_I2C_CR_HOLD;
+
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	/* Clear the interrupts in interrupt status register */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/*
+	 * The no. of bytes to receive is checked against the limit of
+	 * max transfer size. Set transfer size register with no of bytes
+	 * receive if it is less than transfer size and transfer size if
+	 * it is more. Enable the interrupts.
+	 */
+	if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
+		cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+				  CDNS_I2C_XFER_SIZE_OFFSET);
+		id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
+	} else {
+		cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
+	}
+
+	/* Set the slave address in address register - triggers operation */
+	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
+	/* Clear the bus hold flag if bytes to receive is less than FIFO size */
+	if (!id->bus_hold_flag &&
+		((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
+		(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+			cdns_i2c_clear_bus_hold(id);
+	cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_msend - Prepare and start a master send operation
+ * @id:		pointer to the i2c device
+ */
+static void cdns_i2c_msend(struct cdns_i2c *id)
+{
+	unsigned int avail_bytes;
+	unsigned int bytes_to_send;
+	unsigned int ctrl_reg;
+	unsigned int isr_status;
+
+	id->p_recv_buf = NULL;
+	id->p_send_buf = id->p_msg->buf;
+	id->send_count = id->p_msg->len;
+
+	/* Set the controller in Master transmit mode and clear the FIFO. */
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg &= ~CDNS_I2C_CR_RW;
+	ctrl_reg |= CDNS_I2C_CR_CLR_FIFO;
+
+	/*
+	 * Check for the message size against FIFO depth and set the
+	 * 'hold bus' bit if it is greater than FIFO depth.
+	 */
+	if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+		ctrl_reg |= CDNS_I2C_CR_HOLD;
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	/* Clear the interrupts in interrupt status register. */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/*
+	 * Calculate the space available in FIFO. Check the message length
+	 * against the space available, and fill the FIFO accordingly.
+	 * Enable the interrupts.
+	 */
+	avail_bytes = CDNS_I2C_FIFO_DEPTH -
+				cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+	if (id->send_count > avail_bytes)
+		bytes_to_send = avail_bytes;
+	else
+		bytes_to_send = id->send_count;
+
+	while (bytes_to_send--) {
+		cdns_i2c_writereg((*(id->p_send_buf)++), CDNS_I2C_DATA_OFFSET);
+		id->send_count--;
+	}
+
+	/*
+	 * Clear the bus hold flag if there is no more data
+	 * and if it is the last message.
+	 */
+	if (!id->bus_hold_flag && !id->send_count)
+		cdns_i2c_clear_bus_hold(id);
+	/* Set the slave address in address register - triggers operation. */
+	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
+
+	cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_master_reset - Reset the interface
+ * @adap:	pointer to the i2c adapter driver instance
+ *
+ * This function cleanup the fifos, clear the hold bit and status
+ * and disable the interrupts.
+ */
+static void cdns_i2c_master_reset(struct i2c_adapter *adap)
+{
+	struct cdns_i2c *id = adap->algo_data;
+	u32 regval;
+
+	/* Disable the interrupts */
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+	/* Clear the hold bit and fifos */
+	regval = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	regval &= ~CDNS_I2C_CR_HOLD;
+	regval |= CDNS_I2C_CR_CLR_FIFO;
+	cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
+	/* Update the transfercount register to zero */
+	cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+	/* Clear the interupt status register */
+	regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
+	/* Clear the status register */
+	regval = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+	cdns_i2c_writereg(regval, CDNS_I2C_SR_OFFSET);
+}
+
+static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
+		struct i2c_adapter *adap)
+{
+	unsigned long time_left;
+	u32 reg;
+
+	id->p_msg = msg;
+	id->err_status = 0;
+	reinit_completion(&id->xfer_done);
+
+	/* Check for the TEN Bit mode on each msg */
+	reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	if (msg->flags & I2C_M_TEN) {
+		if (reg & CDNS_I2C_CR_NEA)
+			cdns_i2c_writereg(reg & ~CDNS_I2C_CR_NEA,
+					CDNS_I2C_CR_OFFSET);
+	} else {
+		if (!(reg & CDNS_I2C_CR_NEA))
+			cdns_i2c_writereg(reg | CDNS_I2C_CR_NEA,
+					CDNS_I2C_CR_OFFSET);
+	}
+
+	/* Check for the R/W flag on each msg */
+	if (msg->flags & I2C_M_RD)
+		cdns_i2c_mrecv(id);
+	else
+		cdns_i2c_msend(id);
+
+	/* Wait for the signal of completion */
+	time_left = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+	if (time_left == 0) {
+		cdns_i2c_master_reset(adap);
+		dev_err(id->adap.dev.parent,
+				"timeout waiting on completion\n");
+		return -ETIMEDOUT;
+	}
+
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
+			  CDNS_I2C_IDR_OFFSET);
+
+	/* If it is bus arbitration error, try again */
+	if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
+		return -EAGAIN;
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_master_xfer - The main i2c transfer function
+ * @adap:	pointer to the i2c adapter driver instance
+ * @msgs:	pointer to the i2c message structure
+ * @num:	the number of messages to transfer
+ *
+ * Initiates the send/recv activity based on the transfer message received.
+ *
+ * Return: number of msgs processed on success, negative error otherwise
+ */
+static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	int ret, count;
+	u32 reg;
+	struct cdns_i2c *id = adap->algo_data;
+	bool hold_quirk;
+
+	ret = pm_runtime_get_sync(id->dev);
+	if (ret < 0)
+		return ret;
+	/* Check if the bus is free */
+	if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT);
+	/*
+	 * Set the flag to one when multiple messages are to be
+	 * processed with a repeated start.
+	 */
+	if (num > 1) {
+		/*
+		 * This controller does not give completion interrupt after a
+		 * master receive message if HOLD bit is set (repeated start),
+		 * resulting in SW timeout. Hence, if a receive message is
+		 * followed by any other message, an error is returned
+		 * indicating that this sequence is not supported.
+		 */
+		for (count = 0; (count < num - 1 && hold_quirk); count++) {
+			if (msgs[count].flags & I2C_M_RD) {
+				dev_warn(adap->dev.parent,
+					 "Can't do repeated start after a receive message\n");
+				ret = -EOPNOTSUPP;
+				goto out;
+			}
+		}
+		id->bus_hold_flag = 1;
+		reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+		reg |= CDNS_I2C_CR_HOLD;
+		cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
+	} else {
+		id->bus_hold_flag = 0;
+	}
+
+	/* Process the msg one by one */
+	for (count = 0; count < num; count++, msgs++) {
+		if (count == (num - 1))
+			id->bus_hold_flag = 0;
+
+		ret = cdns_i2c_process_msg(id, msgs, adap);
+		if (ret)
+			goto out;
+
+		/* Report the other error interrupts to application */
+		if (id->err_status) {
+			cdns_i2c_master_reset(adap);
+
+			if (id->err_status & CDNS_I2C_IXR_NACK) {
+				ret = -ENXIO;
+				goto out;
+			}
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	ret = num;
+out:
+	pm_runtime_mark_last_busy(id->dev);
+	pm_runtime_put_autosuspend(id->dev);
+	return ret;
+}
+
+/**
+ * cdns_i2c_func - Returns the supported features of the I2C driver
+ * @adap:	pointer to the i2c adapter structure
+ *
+ * Return: 32 bit value, each bit corresponding to a feature
+ */
+static u32 cdns_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+		I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm cdns_i2c_algo = {
+	.master_xfer	= cdns_i2c_master_xfer,
+	.functionality	= cdns_i2c_func,
+};
+
+/**
+ * cdns_i2c_calc_divs - Calculate clock dividers
+ * @f:		I2C clock frequency
+ * @input_clk:	Input clock frequency
+ * @a:		First divider (return value)
+ * @b:		Second divider (return value)
+ *
+ * f is used as input and output variable. As input it is used as target I2C
+ * frequency. On function exit f holds the actually resulting I2C frequency.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_i2c_calc_divs(unsigned long *f, unsigned long input_clk,
+		unsigned int *a, unsigned int *b)
+{
+	unsigned long fscl = *f, best_fscl = *f, actual_fscl, temp;
+	unsigned int div_a, div_b, calc_div_a = 0, calc_div_b = 0;
+	unsigned int last_error, current_error;
+
+	/* calculate (divisor_a+1) x (divisor_b+1) */
+	temp = input_clk / (22 * fscl);
+
+	/*
+	 * If the calculated value is negative or 0, the fscl input is out of
+	 * range. Return error.
+	 */
+	if (!temp || (temp > (CDNS_I2C_DIVA_MAX * CDNS_I2C_DIVB_MAX)))
+		return -EINVAL;
+
+	last_error = -1;
+	for (div_a = 0; div_a < CDNS_I2C_DIVA_MAX; div_a++) {
+		div_b = DIV_ROUND_UP(input_clk, 22 * fscl * (div_a + 1));
+
+		if ((div_b < 1) || (div_b > CDNS_I2C_DIVB_MAX))
+			continue;
+		div_b--;
+
+		actual_fscl = input_clk / (22 * (div_a + 1) * (div_b + 1));
+
+		if (actual_fscl > fscl)
+			continue;
+
+		current_error = ((actual_fscl > fscl) ? (actual_fscl - fscl) :
+							(fscl - actual_fscl));
+
+		if (last_error > current_error) {
+			calc_div_a = div_a;
+			calc_div_b = div_b;
+			best_fscl = actual_fscl;
+			last_error = current_error;
+		}
+	}
+
+	*a = calc_div_a;
+	*b = calc_div_b;
+	*f = best_fscl;
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_setclk - This function sets the serial clock rate for the I2C device
+ * @clk_in:	I2C clock input frequency in Hz
+ * @id:		Pointer to the I2C device structure
+ *
+ * The device must be idle rather than busy transferring data before setting
+ * these device options.
+ * The data rate is set by values in the control register.
+ * The formula for determining the correct register values is
+ *	Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+ * See the hardware data sheet for a full explanation of setting the serial
+ * clock rate. The clock can not be faster than the input clock divide by 22.
+ * The two most common clock rates are 100KHz and 400KHz.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
+{
+	unsigned int div_a, div_b;
+	unsigned int ctrl_reg;
+	int ret = 0;
+	unsigned long fscl = id->i2c_clk;
+
+	ret = cdns_i2c_calc_divs(&fscl, clk_in, &div_a, &div_b);
+	if (ret)
+		return ret;
+
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
+	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
+			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_clk_notifier_cb - Clock rate change callback
+ * @nb:		Pointer to notifier block
+ * @event:	Notification reason
+ * @data:	Pointer to notification data object
+ *
+ * This function is called when the cdns_i2c input clock frequency changes.
+ * The callback checks whether a valid bus frequency can be generated after the
+ * change. If so, the change is acknowledged, otherwise the change is aborted.
+ * New dividers are written to the HW in the pre- or post change notification
+ * depending on the scaling direction.
+ *
+ * Return:	NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
+ *		to acknowledge the change, NOTIFY_DONE if the notification is
+ *		considered irrelevant.
+ */
+static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
+		event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct cdns_i2c *id = to_cdns_i2c(nb);
+
+	if (pm_runtime_suspended(id->dev))
+		return NOTIFY_OK;
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+	{
+		unsigned long input_clk = ndata->new_rate;
+		unsigned long fscl = id->i2c_clk;
+		unsigned int div_a, div_b;
+		int ret;
+
+		ret = cdns_i2c_calc_divs(&fscl, input_clk, &div_a, &div_b);
+		if (ret) {
+			dev_warn(id->adap.dev.parent,
+					"clock rate change rejected\n");
+			return NOTIFY_STOP;
+		}
+
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			cdns_i2c_setclk(ndata->new_rate, id);
+
+		return NOTIFY_OK;
+	}
+	case POST_RATE_CHANGE:
+		id->input_clk = ndata->new_rate;
+		/* scale down */
+		if (ndata->new_rate < ndata->old_rate)
+			cdns_i2c_setclk(ndata->new_rate, id);
+		return NOTIFY_OK;
+	case ABORT_RATE_CHANGE:
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			cdns_i2c_setclk(ndata->old_rate, id);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+/**
+ * cdns_i2c_runtime_suspend -  Runtime suspend method for the driver
+ * @dev:	Address of the platform_device structure
+ *
+ * Put the driver into low power mode.
+ *
+ * Return: 0 always
+ */
+static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+
+	clk_disable(xi2c->clk);
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_runtime_resume - Runtime resume
+ * @dev:	Address of the platform_device structure
+ *
+ * Runtime resume callback.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(xi2c->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops cdns_i2c_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
+			   cdns_i2c_runtime_resume, NULL)
+};
+
+static const struct cdns_platform_data r1p10_i2c_def = {
+	.quirks = CDNS_I2C_BROKEN_HOLD_BIT,
+};
+
+static const struct of_device_id cdns_i2c_of_match[] = {
+	{ .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def },
+	{ .compatible = "cdns,i2c-r1p14",},
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
+
+/**
+ * cdns_i2c_probe - Platform registration call
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the i2c
+ * device. User can modify the address mode to 10 bit address mode using the
+ * ioctl call with option I2C_TENBIT.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_probe(struct platform_device *pdev)
+{
+	struct resource *r_mem;
+	struct cdns_i2c *id;
+	int ret;
+	const struct of_device_id *match;
+
+	id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
+	if (!id)
+		return -ENOMEM;
+
+	id->dev = &pdev->dev;
+	platform_set_drvdata(pdev, id);
+
+	match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node);
+	if (match && match->data) {
+		const struct cdns_platform_data *data = match->data;
+		id->quirks = data->quirks;
+	}
+
+	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
+	if (IS_ERR(id->membase))
+		return PTR_ERR(id->membase);
+
+	id->irq = platform_get_irq(pdev, 0);
+
+	id->adap.owner = THIS_MODULE;
+	id->adap.dev.of_node = pdev->dev.of_node;
+	id->adap.algo = &cdns_i2c_algo;
+	id->adap.timeout = CDNS_I2C_TIMEOUT;
+	id->adap.retries = 3;		/* Default retry value. */
+	id->adap.algo_data = id;
+	id->adap.dev.parent = &pdev->dev;
+	init_completion(&id->xfer_done);
+	snprintf(id->adap.name, sizeof(id->adap.name),
+		 "Cadence I2C at %08lx", (unsigned long)r_mem->start);
+
+	id->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(id->clk)) {
+		dev_err(&pdev->dev, "input clock not found.\n");
+		return PTR_ERR(id->clk);
+	}
+	ret = clk_prepare_enable(id->clk);
+	if (ret)
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+
+	pm_runtime_enable(id->dev);
+	pm_runtime_set_autosuspend_delay(id->dev, CNDS_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(id->dev);
+	pm_runtime_set_active(id->dev);
+
+	id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
+	if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
+		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+	id->input_clk = clk_get_rate(id->clk);
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+			&id->i2c_clk);
+	if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
+		id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+
+	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
+			  CDNS_I2C_CR_OFFSET);
+
+	ret = cdns_i2c_setclk(id->input_clk, id);
+	if (ret) {
+		dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
+		ret = -EINVAL;
+		goto err_clk_dis;
+	}
+
+	ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
+				 DRIVER_NAME, id);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
+		goto err_clk_dis;
+	}
+
+	/*
+	 * Cadence I2C controller has a bug wherein it generates
+	 * invalid read transaction after HW timeout in master receiver mode.
+	 * HW timeout is not used by this driver and the interrupt is disabled.
+	 * But the feature itself cannot be disabled. Hence maximum value
+	 * is written to this register to reduce the chances of error.
+	 */
+	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+
+	ret = i2c_add_adapter(&id->adap);
+	if (ret < 0)
+		goto err_clk_dis;
+
+	dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
+		 id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
+
+	return 0;
+
+err_clk_dis:
+	clk_disable_unprepare(id->clk);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return ret;
+}
+
+/**
+ * cdns_i2c_remove - Unregister the device after releasing the resources
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ *
+ * Return: 0 always
+ */
+static int cdns_i2c_remove(struct platform_device *pdev)
+{
+	struct cdns_i2c *id = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&id->adap);
+	clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
+	clk_disable_unprepare(id->clk);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver cdns_i2c_drv = {
+	.driver = {
+		.name  = DRIVER_NAME,
+		.of_match_table = cdns_i2c_of_match,
+		.pm = &cdns_i2c_dev_pm_ops,
+	},
+	.probe  = cdns_i2c_probe,
+	.remove = cdns_i2c_remove,
+};
+
+module_platform_driver(cdns_i2c_drv);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Cadence I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cbus-gpio.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cbus-gpio.c
new file mode 100644
index 0000000..b4f91e4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -0,0 +1,303 @@
+/*
+ * CBUS I2C driver for Nokia Internet Tablets.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Based on code written by Juha Yrjölä, David Weinehall, Mikko Ylinen and
+ * Felipe Balbi. Converted to I2C driver by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
+
+/*
+ * Bit counts are derived from Nokia implementation. These should be checked
+ * if other CBUS implementations appear.
+ */
+#define CBUS_ADDR_BITS	3
+#define CBUS_REG_BITS	5
+
+struct cbus_host {
+	spinlock_t	lock;		/* host lock */
+	struct device	*dev;
+	int		clk_gpio;
+	int		dat_gpio;
+	int		sel_gpio;
+};
+
+/**
+ * cbus_send_bit - sends one bit over the bus
+ * @host: the host we're using
+ * @bit: one bit of information to send
+ */
+static void cbus_send_bit(struct cbus_host *host, unsigned bit)
+{
+	gpio_set_value(host->dat_gpio, bit ? 1 : 0);
+	gpio_set_value(host->clk_gpio, 1);
+	gpio_set_value(host->clk_gpio, 0);
+}
+
+/**
+ * cbus_send_data - sends @len amount of data over the bus
+ * @host: the host we're using
+ * @data: the data to send
+ * @len: size of the transfer
+ */
+static void cbus_send_data(struct cbus_host *host, unsigned data, unsigned len)
+{
+	int i;
+
+	for (i = len; i > 0; i--)
+		cbus_send_bit(host, data & (1 << (i - 1)));
+}
+
+/**
+ * cbus_receive_bit - receives one bit from the bus
+ * @host: the host we're using
+ */
+static int cbus_receive_bit(struct cbus_host *host)
+{
+	int ret;
+
+	gpio_set_value(host->clk_gpio, 1);
+	ret = gpio_get_value(host->dat_gpio);
+	gpio_set_value(host->clk_gpio, 0);
+	return ret;
+}
+
+/**
+ * cbus_receive_word - receives 16-bit word from the bus
+ * @host: the host we're using
+ */
+static int cbus_receive_word(struct cbus_host *host)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 16; i > 0; i--) {
+		int bit = cbus_receive_bit(host);
+
+		if (bit < 0)
+			return bit;
+
+		if (bit)
+			ret |= 1 << (i - 1);
+	}
+	return ret;
+}
+
+/**
+ * cbus_transfer - transfers data over the bus
+ * @host: the host we're using
+ * @rw: read/write flag
+ * @dev: device address
+ * @reg: register address
+ * @data: if @rw == I2C_SBUS_WRITE data to send otherwise 0
+ */
+static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev,
+			 unsigned reg, unsigned data)
+{
+	unsigned long flags;
+	int ret;
+
+	/* We don't want interrupts disturbing our transfer */
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Reset state and start of transfer, SEL stays down during transfer */
+	gpio_set_value(host->sel_gpio, 0);
+
+	/* Set the DAT pin to output */
+	gpio_direction_output(host->dat_gpio, 1);
+
+	/* Send the device address */
+	cbus_send_data(host, dev, CBUS_ADDR_BITS);
+
+	/* Send the rw flag */
+	cbus_send_bit(host, rw == I2C_SMBUS_READ);
+
+	/* Send the register address */
+	cbus_send_data(host, reg, CBUS_REG_BITS);
+
+	if (rw == I2C_SMBUS_WRITE) {
+		cbus_send_data(host, data, 16);
+		ret = 0;
+	} else {
+		ret = gpio_direction_input(host->dat_gpio);
+		if (ret) {
+			dev_dbg(host->dev, "failed setting direction\n");
+			goto out;
+		}
+		gpio_set_value(host->clk_gpio, 1);
+
+		ret = cbus_receive_word(host);
+		if (ret < 0) {
+			dev_dbg(host->dev, "failed receiving data\n");
+			goto out;
+		}
+	}
+
+	/* Indicate end of transfer, SEL goes up until next transfer */
+	gpio_set_value(host->sel_gpio, 1);
+	gpio_set_value(host->clk_gpio, 1);
+	gpio_set_value(host->clk_gpio, 0);
+
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return ret;
+}
+
+static int cbus_i2c_smbus_xfer(struct i2c_adapter	*adapter,
+			       u16			addr,
+			       unsigned short		flags,
+			       char			read_write,
+			       u8			command,
+			       int			size,
+			       union i2c_smbus_data	*data)
+{
+	struct cbus_host *chost = i2c_get_adapdata(adapter);
+	int ret;
+
+	if (size != I2C_SMBUS_WORD_DATA)
+		return -EINVAL;
+
+	ret = cbus_transfer(chost, read_write == I2C_SMBUS_READ, addr,
+			    command, data->word);
+	if (ret < 0)
+		return ret;
+
+	if (read_write == I2C_SMBUS_READ)
+		data->word = ret;
+
+	return 0;
+}
+
+static u32 cbus_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA;
+}
+
+static const struct i2c_algorithm cbus_i2c_algo = {
+	.smbus_xfer	= cbus_i2c_smbus_xfer,
+	.functionality	= cbus_i2c_func,
+};
+
+static int cbus_i2c_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(adapter);
+
+	return 0;
+}
+
+static int cbus_i2c_probe(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter;
+	struct cbus_host *chost;
+	int ret;
+
+	adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter),
+			       GFP_KERNEL);
+	if (!adapter)
+		return -ENOMEM;
+
+	chost = devm_kzalloc(&pdev->dev, sizeof(*chost), GFP_KERNEL);
+	if (!chost)
+		return -ENOMEM;
+
+	if (pdev->dev.of_node) {
+		struct device_node *dnode = pdev->dev.of_node;
+		if (of_gpio_count(dnode) != 3)
+			return -ENODEV;
+		chost->clk_gpio = of_get_gpio(dnode, 0);
+		chost->dat_gpio = of_get_gpio(dnode, 1);
+		chost->sel_gpio = of_get_gpio(dnode, 2);
+	} else if (dev_get_platdata(&pdev->dev)) {
+		struct i2c_cbus_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
+		chost->clk_gpio = pdata->clk_gpio;
+		chost->dat_gpio = pdata->dat_gpio;
+		chost->sel_gpio = pdata->sel_gpio;
+	} else {
+		return -ENODEV;
+	}
+
+	adapter->owner		= THIS_MODULE;
+	adapter->class		= I2C_CLASS_HWMON;
+	adapter->dev.parent	= &pdev->dev;
+	adapter->dev.of_node	= pdev->dev.of_node;
+	adapter->nr		= pdev->id;
+	adapter->timeout	= HZ;
+	adapter->algo		= &cbus_i2c_algo;
+	strlcpy(adapter->name, "CBUS I2C adapter", sizeof(adapter->name));
+
+	spin_lock_init(&chost->lock);
+	chost->dev = &pdev->dev;
+
+	ret = devm_gpio_request_one(&pdev->dev, chost->clk_gpio,
+				    GPIOF_OUT_INIT_LOW, "CBUS clk");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(&pdev->dev, chost->dat_gpio, GPIOF_IN,
+				    "CBUS data");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request_one(&pdev->dev, chost->sel_gpio,
+				    GPIOF_OUT_INIT_HIGH, "CBUS sel");
+	if (ret)
+		return ret;
+
+	i2c_set_adapdata(adapter, chost);
+	platform_set_drvdata(pdev, adapter);
+
+	return i2c_add_numbered_adapter(adapter);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id i2c_cbus_dt_ids[] = {
+	{ .compatible = "i2c-cbus-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, i2c_cbus_dt_ids);
+#endif
+
+static struct platform_driver cbus_i2c_driver = {
+	.probe	= cbus_i2c_probe,
+	.remove	= cbus_i2c_remove,
+	.driver	= {
+		.name	= "i2c-cbus-gpio",
+		.of_match_table = of_match_ptr(i2c_cbus_dt_ids),
+	},
+};
+module_platform_driver(cbus_i2c_driver);
+
+MODULE_ALIAS("platform:i2c-cbus-gpio");
+MODULE_DESCRIPTION("CBUS I2C driver");
+MODULE_AUTHOR("Juha Yrjölä");
+MODULE_AUTHOR("David Weinehall");
+MODULE_AUTHOR("Mikko Ylinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cht-wc.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cht-wc.c
new file mode 100644
index 0000000..29456c8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cht-wc.c
@@ -0,0 +1,409 @@
+/*
+ * Intel CHT Whiskey Cove PMIC I2C Master driver
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CHT_WC_I2C_CTRL			0x5e24
+#define CHT_WC_I2C_CTRL_WR		BIT(0)
+#define CHT_WC_I2C_CTRL_RD		BIT(1)
+#define CHT_WC_I2C_CLIENT_ADDR		0x5e25
+#define CHT_WC_I2C_REG_OFFSET		0x5e26
+#define CHT_WC_I2C_WRDATA		0x5e27
+#define CHT_WC_I2C_RDDATA		0x5e28
+
+#define CHT_WC_EXTCHGRIRQ		0x6e0a
+#define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ	BIT(0)
+#define CHT_WC_EXTCHGRIRQ_WRITE_IRQ	BIT(1)
+#define CHT_WC_EXTCHGRIRQ_READ_IRQ	BIT(2)
+#define CHT_WC_EXTCHGRIRQ_NACK_IRQ	BIT(3)
+#define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK	((u8)GENMASK(3, 1))
+#define CHT_WC_EXTCHGRIRQ_MSK		0x6e17
+
+struct cht_wc_i2c_adap {
+	struct i2c_adapter adapter;
+	wait_queue_head_t wait;
+	struct irq_chip irqchip;
+	struct mutex adap_lock;
+	struct mutex irqchip_lock;
+	struct regmap *regmap;
+	struct irq_domain *irq_domain;
+	struct i2c_client *client;
+	int client_irq;
+	u8 irq_mask;
+	u8 old_irq_mask;
+	int read_data;
+	bool io_error;
+	bool done;
+};
+
+static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data)
+{
+	struct cht_wc_i2c_adap *adap = data;
+	int ret, reg;
+
+	mutex_lock(&adap->adap_lock);
+
+	/* Read IRQs */
+	ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, &reg);
+	if (ret) {
+		dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n");
+		mutex_unlock(&adap->adap_lock);
+		return IRQ_NONE;
+	}
+
+	reg &= ~adap->irq_mask;
+
+	/* Reads must be acked after reading the received data. */
+	ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data);
+	if (ret)
+		adap->io_error = true;
+
+	/*
+	 * Immediately ack IRQs, so that if new IRQs arrives while we're
+	 * handling the previous ones our irq will re-trigger when we're done.
+	 */
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg);
+	if (ret)
+		dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n");
+
+	if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) {
+		adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ);
+		adap->done = true;
+	}
+
+	mutex_unlock(&adap->adap_lock);
+
+	if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK)
+		wake_up(&adap->wait);
+
+	/*
+	 * Do NOT use handle_nested_irq here, the client irq handler will
+	 * likely want to do i2c transfers and the i2c controller uses this
+	 * interrupt handler as well, so running the client irq handler from
+	 * this thread will cause things to lock up.
+	 */
+	if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) {
+		/*
+		 * generic_handle_irq expects local IRQs to be disabled
+		 * as normally it is called from interrupt context.
+		 */
+		local_irq_disable();
+		generic_handle_irq(adap->client_irq);
+		local_irq_enable();
+	}
+
+	return IRQ_HANDLED;
+}
+
+static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap)
+{
+	/* This i2c adapter only supports SMBUS byte transfers */
+	return I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr,
+				      unsigned short flags, char read_write,
+				      u8 command, int size,
+				      union i2c_smbus_data *data)
+{
+	struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap);
+	int ret;
+
+	mutex_lock(&adap->adap_lock);
+	adap->io_error = false;
+	adap->done = false;
+	mutex_unlock(&adap->adap_lock);
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr);
+	if (ret)
+		return ret;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL,
+			   (read_write == I2C_SMBUS_WRITE) ?
+			   CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD);
+	if (ret)
+		return ret;
+
+	ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30));
+	if (ret == 0) {
+		/*
+		 * The CHT GPIO controller serializes all IRQs, sometimes
+		 * causing significant delays, check status manually.
+		 */
+		cht_wc_i2c_adap_thread_handler(0, adap);
+		if (!adap->done)
+			return -ETIMEDOUT;
+	}
+
+	ret = 0;
+	mutex_lock(&adap->adap_lock);
+	if (adap->io_error)
+		ret = -EIO;
+	else if (read_write == I2C_SMBUS_READ)
+		data->byte = adap->read_data;
+	mutex_unlock(&adap->adap_lock);
+
+	return ret;
+}
+
+static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
+	.functionality = cht_wc_i2c_adap_master_func,
+	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
+};
+
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
+/**** irqchip for the client connected to the extchgr i2c adapter ****/
+static void cht_wc_i2c_irq_lock(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&adap->irqchip_lock);
+}
+
+static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+	int ret;
+
+	if (adap->irq_mask != adap->old_irq_mask) {
+		ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK,
+				   adap->irq_mask);
+		if (ret == 0)
+			adap->old_irq_mask = adap->irq_mask;
+		else
+			dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n");
+	}
+
+	mutex_unlock(&adap->irqchip_lock);
+}
+
+static void cht_wc_i2c_irq_enable(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
+}
+
+static void cht_wc_i2c_irq_disable(struct irq_data *data)
+{
+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
+
+	adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
+}
+
+static const struct irq_chip cht_wc_i2c_irq_chip = {
+	.irq_bus_lock		= cht_wc_i2c_irq_lock,
+	.irq_bus_sync_unlock	= cht_wc_i2c_irq_sync_unlock,
+	.irq_disable		= cht_wc_i2c_irq_disable,
+	.irq_enable		= cht_wc_i2c_irq_enable,
+	.name			= "cht_wc_ext_chrg_irq_chip",
+};
+
+static const struct property_entry bq24190_props[] = {
+	PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
+	PROPERTY_ENTRY_BOOL("omit-battery-class"),
+	PROPERTY_ENTRY_BOOL("disable-reset"),
+	{ }
+};
+
+static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct cht_wc_i2c_adap *adap;
+	struct i2c_board_info board_info = {
+		.type = "bq24190",
+		.addr = 0x6b,
+		.properties = bq24190_props,
+	};
+	int ret, reg, irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Error missing irq resource\n");
+		return -EINVAL;
+	}
+
+	adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
+	if (!adap)
+		return -ENOMEM;
+
+	init_waitqueue_head(&adap->wait);
+	mutex_init(&adap->adap_lock);
+	mutex_init(&adap->irqchip_lock);
+	adap->irqchip = cht_wc_i2c_irq_chip;
+	adap->regmap = pmic->regmap;
+	adap->adapter.owner = THIS_MODULE;
+	adap->adapter.class = I2C_CLASS_HWMON;
+	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
+	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
+		sizeof(adap->adapter.name));
+	adap->adapter.dev.parent = &pdev->dev;
+
+	/* Clear and activate i2c-adapter interrupts, disable client IRQ */
+	adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK;
+
+	ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &reg);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask);
+	if (ret)
+		return ret;
+
+	/* Alloc and register client IRQ */
+	adap->irq_domain = irq_domain_add_linear(pdev->dev.of_node, 1,
+						 &irq_domain_simple_ops, NULL);
+	if (!adap->irq_domain)
+		return -ENOMEM;
+
+	adap->client_irq = irq_create_mapping(adap->irq_domain, 0);
+	if (!adap->client_irq) {
+		ret = -ENOMEM;
+		goto remove_irq_domain;
+	}
+
+	irq_set_chip_data(adap->client_irq, adap);
+	irq_set_chip_and_handler(adap->client_irq, &adap->irqchip,
+				 handle_simple_irq);
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					cht_wc_i2c_adap_thread_handler,
+					IRQF_ONESHOT, "PMIC I2C Adapter", adap);
+	if (ret)
+		goto remove_irq_domain;
+
+	i2c_set_adapdata(&adap->adapter, adap);
+	ret = i2c_add_adapter(&adap->adapter);
+	if (ret)
+		goto remove_irq_domain;
+
+	board_info.irq = adap->client_irq;
+	adap->client = i2c_new_device(&adap->adapter, &board_info);
+	if (!adap->client) {
+		ret = -ENOMEM;
+		goto del_adapter;
+	}
+
+	platform_set_drvdata(pdev, adap);
+	return 0;
+
+del_adapter:
+	i2c_del_adapter(&adap->adapter);
+remove_irq_domain:
+	irq_domain_remove(adap->irq_domain);
+	return ret;
+}
+
+static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
+{
+	struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
+
+	i2c_unregister_device(adap->client);
+	i2c_del_adapter(&adap->adapter);
+	irq_domain_remove(adap->irq_domain);
+
+	return 0;
+}
+
+static struct platform_device_id cht_wc_i2c_adap_id_table[] = {
+	{ .name = "cht_wcove_ext_chgr" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table);
+
+static struct platform_driver cht_wc_i2c_adap_driver = {
+	.probe = cht_wc_i2c_adap_i2c_probe,
+	.remove = cht_wc_i2c_adap_i2c_remove,
+	.driver = {
+		.name = "cht_wcove_ext_chgr",
+	},
+	.id_table = cht_wc_i2c_adap_id_table,
+};
+module_platform_driver(cht_wc_i2c_adap_driver);
+
+MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cpm.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cpm.c
new file mode 100644
index 0000000..8a8ca94
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cpm.c
@@ -0,0 +1,721 @@
+/*
+ * Freescale CPM1/CPM2 I2C interface.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * moved into proper i2c interface;
+ * Brad Parker (brad@heeltoe.com)
+ *
+ * Parts from dbox2_i2c.c (cvs.tuxbox.org)
+ * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net)
+ *
+ * (C) 2007 Montavista Software, Inc.
+ * Vitaly Bordug <vitb@kernel.crashing.org>
+ *
+ * Converted to of_platform_device. Renamed to i2c-cpm.c.
+ * (C) 2007,2008 Jochen Friedrich <jochen@scram.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/cpm.h>
+
+/* Try to define this if you have an older CPU (earlier than rev D4) */
+/* However, better use a GPIO based bitbang driver in this case :/   */
+#undef	I2C_CHIP_ERRATA
+
+#define CPM_MAX_READ    513
+#define CPM_MAXBD       4
+
+#define I2C_EB			(0x10) /* Big endian mode */
+#define I2C_EB_CPM2		(0x30) /* Big endian mode, memory snoop */
+
+#define DPRAM_BASE		((u8 __iomem __force *)cpm_muram_addr(0))
+
+/* I2C parameter RAM. */
+struct i2c_ram {
+	ushort  rbase;		/* Rx Buffer descriptor base address */
+	ushort  tbase;		/* Tx Buffer descriptor base address */
+	u_char  rfcr;		/* Rx function code */
+	u_char  tfcr;		/* Tx function code */
+	ushort  mrblr;		/* Max receive buffer length */
+	uint    rstate;		/* Internal */
+	uint    rdp;		/* Internal */
+	ushort  rbptr;		/* Rx Buffer descriptor pointer */
+	ushort  rbc;		/* Internal */
+	uint    rxtmp;		/* Internal */
+	uint    tstate;		/* Internal */
+	uint    tdp;		/* Internal */
+	ushort  tbptr;		/* Tx Buffer descriptor pointer */
+	ushort  tbc;		/* Internal */
+	uint    txtmp;		/* Internal */
+	char    res1[4];	/* Reserved */
+	ushort  rpbase;		/* Relocation pointer */
+	char    res2[2];	/* Reserved */
+};
+
+#define I2COM_START	0x80
+#define I2COM_MASTER	0x01
+#define I2CER_TXE	0x10
+#define I2CER_BUSY	0x04
+#define I2CER_TXB	0x02
+#define I2CER_RXB	0x01
+#define I2MOD_EN	0x01
+
+/* I2C Registers */
+struct i2c_reg {
+	u8	i2mod;
+	u8	res1[3];
+	u8	i2add;
+	u8	res2[3];
+	u8	i2brg;
+	u8	res3[3];
+	u8	i2com;
+	u8	res4[3];
+	u8	i2cer;
+	u8	res5[3];
+	u8	i2cmr;
+};
+
+struct cpm_i2c {
+	char *base;
+	struct platform_device *ofdev;
+	struct i2c_adapter adap;
+	uint dp_addr;
+	int version; /* CPM1=1, CPM2=2 */
+	int irq;
+	int cp_command;
+	int freq;
+	struct i2c_reg __iomem *i2c_reg;
+	struct i2c_ram __iomem *i2c_ram;
+	u16 i2c_addr;
+	wait_queue_head_t i2c_wait;
+	cbd_t __iomem *tbase;
+	cbd_t __iomem *rbase;
+	u_char *txbuf[CPM_MAXBD];
+	u_char *rxbuf[CPM_MAXBD];
+	dma_addr_t txdma[CPM_MAXBD];
+	dma_addr_t rxdma[CPM_MAXBD];
+};
+
+static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
+{
+	struct cpm_i2c *cpm;
+	struct i2c_reg __iomem *i2c_reg;
+	struct i2c_adapter *adap = dev_id;
+	int i;
+
+	cpm = i2c_get_adapdata(dev_id);
+	i2c_reg = cpm->i2c_reg;
+
+	/* Clear interrupt. */
+	i = in_8(&i2c_reg->i2cer);
+	out_8(&i2c_reg->i2cer, i);
+
+	dev_dbg(&adap->dev, "Interrupt: %x\n", i);
+
+	wake_up(&cpm->i2c_wait);
+
+	return i ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void cpm_reset_i2c_params(struct cpm_i2c *cpm)
+{
+	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+
+	/* Set up the I2C parameters in the parameter ram. */
+	out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE);
+	out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+	if (cpm->version == 1) {
+		out_8(&i2c_ram->tfcr, I2C_EB);
+		out_8(&i2c_ram->rfcr, I2C_EB);
+	} else {
+		out_8(&i2c_ram->tfcr, I2C_EB_CPM2);
+		out_8(&i2c_ram->rfcr, I2C_EB_CPM2);
+	}
+
+	out_be16(&i2c_ram->mrblr, CPM_MAX_READ);
+
+	out_be32(&i2c_ram->rstate, 0);
+	out_be32(&i2c_ram->rdp, 0);
+	out_be16(&i2c_ram->rbptr, 0);
+	out_be16(&i2c_ram->rbc, 0);
+	out_be32(&i2c_ram->rxtmp, 0);
+	out_be32(&i2c_ram->tstate, 0);
+	out_be32(&i2c_ram->tdp, 0);
+	out_be16(&i2c_ram->tbptr, 0);
+	out_be16(&i2c_ram->tbc, 0);
+	out_be32(&i2c_ram->txtmp, 0);
+}
+
+static void cpm_i2c_force_close(struct i2c_adapter *adap)
+{
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+
+	dev_dbg(&adap->dev, "cpm_i2c_force_close()\n");
+
+	cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD);
+
+	out_8(&i2c_reg->i2cmr, 0x00);	/* Disable all interrupts */
+	out_8(&i2c_reg->i2cer, 0xff);
+}
+
+static void cpm_i2c_parse_message(struct i2c_adapter *adap,
+	struct i2c_msg *pmsg, int num, int tx, int rx)
+{
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	u_char addr;
+	u_char *tb;
+	u_char *rb;
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+	tbdf = cpm->tbase + tx;
+	rbdf = cpm->rbase + rx;
+
+	addr = i2c_8bit_addr_from_msg(pmsg);
+
+	tb = cpm->txbuf[tx];
+	rb = cpm->rxbuf[rx];
+
+	/* Align read buffer */
+	rb = (u_char *) (((ulong) rb + 1) & ~1);
+
+	tb[0] = addr;		/* Device address byte w/rw flag */
+
+	out_be16(&tbdf->cbd_datlen, pmsg->len + 1);
+	out_be16(&tbdf->cbd_sc, 0);
+
+	if (!(pmsg->flags & I2C_M_NOSTART))
+		setbits16(&tbdf->cbd_sc, BD_I2C_START);
+
+	if (tx + 1 == num)
+		setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP);
+
+	if (pmsg->flags & I2C_M_RD) {
+		/*
+		 * To read, we need an empty buffer of the proper length.
+		 * All that is used is the first byte for address, the remainder
+		 * is just used for timing (and doesn't really have to exist).
+		 */
+
+		dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr);
+
+		out_be16(&rbdf->cbd_datlen, 0);
+		out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
+
+		if (rx + 1 == CPM_MAXBD)
+			setbits16(&rbdf->cbd_sc, BD_SC_WRAP);
+
+		eieio();
+		setbits16(&tbdf->cbd_sc, BD_SC_READY);
+	} else {
+		dev_dbg(&adap->dev, "cpm_i2c_write(abyte=0x%x)\n", addr);
+
+		memcpy(tb+1, pmsg->buf, pmsg->len);
+
+		eieio();
+		setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT);
+	}
+}
+
+static int cpm_i2c_check_message(struct i2c_adapter *adap,
+	struct i2c_msg *pmsg, int tx, int rx)
+{
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	u_char *tb;
+	u_char *rb;
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+	tbdf = cpm->tbase + tx;
+	rbdf = cpm->rbase + rx;
+
+	tb = cpm->txbuf[tx];
+	rb = cpm->rxbuf[rx];
+
+	/* Align read buffer */
+	rb = (u_char *) (((uint) rb + 1) & ~1);
+
+	eieio();
+	if (pmsg->flags & I2C_M_RD) {
+		dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n",
+			in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc));
+
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+			dev_dbg(&adap->dev, "I2C read; No ack\n");
+			return -ENXIO;
+		}
+		if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) {
+			dev_err(&adap->dev,
+				"I2C read; complete but rbuf empty\n");
+			return -EREMOTEIO;
+		}
+		if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) {
+			dev_err(&adap->dev, "I2C read; Overrun\n");
+			return -EREMOTEIO;
+		}
+		memcpy(pmsg->buf, rb, pmsg->len);
+	} else {
+		dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx,
+			in_be16(&tbdf->cbd_sc));
+
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+			dev_dbg(&adap->dev, "I2C write; No ack\n");
+			return -ENXIO;
+		}
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) {
+			dev_err(&adap->dev, "I2C write; Underrun\n");
+			return -EIO;
+		}
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+			dev_err(&adap->dev, "I2C write; Collision\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+	struct i2c_msg *pmsg;
+	int ret;
+	int tptr;
+	int rptr;
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+
+	/* Reset to use first buffer */
+	out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));
+	out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));
+
+	tbdf = cpm->tbase;
+	rbdf = cpm->rbase;
+
+	tptr = 0;
+	rptr = 0;
+
+	/*
+	 * If there was a collision in the last i2c transaction,
+	 * Set I2COM_MASTER as it was cleared during collision.
+	 */
+	if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+		out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);
+	}
+
+	while (tptr < num) {
+		pmsg = &msgs[tptr];
+		dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
+
+		cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr);
+		if (pmsg->flags & I2C_M_RD)
+			rptr++;
+		tptr++;
+	}
+	/* Start transfer now */
+	/* Enable RX/TX/Error interupts */
+	out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
+	out_8(&i2c_reg->i2cer, 0xff);	/* Clear interrupt status */
+	/* Chip bug, set enable here */
+	setbits8(&i2c_reg->i2mod, I2MOD_EN);	/* Enable */
+	/* Begin transmission */
+	setbits8(&i2c_reg->i2com, I2COM_START);
+
+	tptr = 0;
+	rptr = 0;
+
+	while (tptr < num) {
+		/* Check for outstanding messages */
+		dev_dbg(&adap->dev, "test ready.\n");
+		pmsg = &msgs[tptr];
+		if (pmsg->flags & I2C_M_RD)
+			ret = wait_event_timeout(cpm->i2c_wait,
+				(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
+				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
+				1 * HZ);
+		else
+			ret = wait_event_timeout(cpm->i2c_wait,
+				!(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),
+				1 * HZ);
+		if (ret == 0) {
+			ret = -EREMOTEIO;
+			dev_err(&adap->dev, "I2C transfer: timeout\n");
+			goto out_err;
+		}
+		if (ret > 0) {
+			dev_dbg(&adap->dev, "ready.\n");
+			ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr);
+			tptr++;
+			if (pmsg->flags & I2C_M_RD)
+				rptr++;
+			if (ret)
+				goto out_err;
+		}
+	}
+#ifdef I2C_CHIP_ERRATA
+	/*
+	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+	 * Disabling I2C too early may cause too short stop condition
+	 */
+	udelay(4);
+	clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+	return (num);
+
+out_err:
+	cpm_i2c_force_close(adap);
+#ifdef I2C_CHIP_ERRATA
+	/*
+	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+	 */
+	clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+	return ret;
+}
+
+static u32 cpm_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static const struct i2c_algorithm cpm_i2c_algo = {
+	.master_xfer = cpm_i2c_xfer,
+	.functionality = cpm_i2c_func,
+};
+
+/* CPM_MAX_READ is also limiting writes according to the code! */
+static const struct i2c_adapter_quirks cpm_i2c_quirks = {
+	.max_num_msgs = CPM_MAXBD,
+	.max_read_len = CPM_MAX_READ,
+	.max_write_len = CPM_MAX_READ,
+};
+
+static const struct i2c_adapter cpm_ops = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-cpm",
+	.algo		= &cpm_i2c_algo,
+	.quirks		= &cpm_i2c_quirks,
+};
+
+static int cpm_i2c_setup(struct cpm_i2c *cpm)
+{
+	struct platform_device *ofdev = cpm->ofdev;
+	const u32 *data;
+	int len, ret, i;
+	void __iomem *i2c_base;
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	unsigned char brg;
+
+	dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n");
+
+	init_waitqueue_head(&cpm->i2c_wait);
+
+	cpm->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (!cpm->irq)
+		return -EINVAL;
+
+	/* Install interrupt handler. */
+	ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c",
+			  &cpm->adap);
+	if (ret)
+		return ret;
+
+	/* I2C parameter RAM */
+	i2c_base = of_iomap(ofdev->dev.of_node, 1);
+	if (i2c_base == NULL) {
+		ret = -EINVAL;
+		goto out_irq;
+	}
+
+	if (of_device_is_compatible(ofdev->dev.of_node, "fsl,cpm1-i2c")) {
+
+		/* Check for and use a microcode relocation patch. */
+		cpm->i2c_ram = i2c_base;
+		cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase);
+
+		/*
+		 * Maybe should use cpm_muram_alloc instead of hardcoding
+		 * this in micropatch.c
+		 */
+		if (cpm->i2c_addr) {
+			cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+			iounmap(i2c_base);
+		}
+
+		cpm->version = 1;
+
+	} else if (of_device_is_compatible(ofdev->dev.of_node, "fsl,cpm2-i2c")) {
+		cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);
+		cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+		out_be16(i2c_base, cpm->i2c_addr);
+		iounmap(i2c_base);
+
+		cpm->version = 2;
+
+	} else {
+		iounmap(i2c_base);
+		ret = -EINVAL;
+		goto out_irq;
+	}
+
+	/* I2C control/status registers */
+	cpm->i2c_reg = of_iomap(ofdev->dev.of_node, 0);
+	if (cpm->i2c_reg == NULL) {
+		ret = -EINVAL;
+		goto out_ram;
+	}
+
+	data = of_get_property(ofdev->dev.of_node, "fsl,cpm-command", &len);
+	if (!data || len != 4) {
+		ret = -EINVAL;
+		goto out_reg;
+	}
+	cpm->cp_command = *data;
+
+	data = of_get_property(ofdev->dev.of_node, "linux,i2c-class", &len);
+	if (data && len == 4)
+		cpm->adap.class = *data;
+
+	data = of_get_property(ofdev->dev.of_node, "clock-frequency", &len);
+	if (data && len == 4)
+		cpm->freq = *data;
+	else
+		cpm->freq = 60000; /* use 60kHz i2c clock by default */
+
+	/*
+	 * Allocate space for CPM_MAXBD transmit and receive buffer
+	 * descriptors in the DP ram.
+	 */
+	cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8);
+	if (!cpm->dp_addr) {
+		ret = -ENOMEM;
+		goto out_reg;
+	}
+
+	cpm->tbase = cpm_muram_addr(cpm->dp_addr);
+	cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD);
+
+	/* Allocate TX and RX buffers */
+
+	tbdf = cpm->tbase;
+	rbdf = cpm->rbase;
+
+	for (i = 0; i < CPM_MAXBD; i++) {
+		cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+						   CPM_MAX_READ + 1,
+						   &cpm->rxdma[i], GFP_KERNEL);
+		if (!cpm->rxbuf[i]) {
+			ret = -ENOMEM;
+			goto out_muram;
+		}
+		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
+
+		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+		if (!cpm->txbuf[i]) {
+			ret = -ENOMEM;
+			goto out_muram;
+		}
+		out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]);
+	}
+
+	/* Initialize Tx/Rx parameters. */
+
+	cpm_reset_i2c_params(cpm);
+
+	dev_dbg(&cpm->ofdev->dev, "i2c_ram 0x%p, i2c_addr 0x%04x, freq %d\n",
+		cpm->i2c_ram, cpm->i2c_addr, cpm->freq);
+	dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n",
+		(u8 __iomem *)cpm->tbase - DPRAM_BASE,
+		(u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+	cpm_command(cpm->cp_command, CPM_CR_INIT_TRX);
+
+	/*
+	 * Select an invalid address. Just make sure we don't use loopback mode
+	 */
+	out_8(&cpm->i2c_reg->i2add, 0x7f << 1);
+
+	/*
+	 * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the
+	 * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get
+	 * the actual i2c bus frequency.
+	 */
+	brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3;
+	out_8(&cpm->i2c_reg->i2brg, brg);
+
+	out_8(&cpm->i2c_reg->i2mod, 0x00);
+	out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);	/* Master mode */
+
+	/* Disable interrupts. */
+	out_8(&cpm->i2c_reg->i2cmr, 0);
+	out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+	return 0;
+
+out_muram:
+	for (i = 0; i < CPM_MAXBD; i++) {
+		if (cpm->rxbuf[i])
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
+				cpm->rxbuf[i], cpm->rxdma[i]);
+		if (cpm->txbuf[i])
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
+				cpm->txbuf[i], cpm->txdma[i]);
+	}
+	cpm_muram_free(cpm->dp_addr);
+out_reg:
+	iounmap(cpm->i2c_reg);
+out_ram:
+	if ((cpm->version == 1) && (!cpm->i2c_addr))
+		iounmap(cpm->i2c_ram);
+	if (cpm->version == 2)
+		cpm_muram_free(cpm->i2c_addr);
+out_irq:
+	free_irq(cpm->irq, &cpm->adap);
+	return ret;
+}
+
+static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
+{
+	int i;
+
+	/* Shut down I2C. */
+	clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN);
+
+	/* Disable interrupts */
+	out_8(&cpm->i2c_reg->i2cmr, 0);
+	out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+	free_irq(cpm->irq, &cpm->adap);
+
+	/* Free all memory */
+	for (i = 0; i < CPM_MAXBD; i++) {
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
+			cpm->rxbuf[i], cpm->rxdma[i]);
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
+			cpm->txbuf[i], cpm->txdma[i]);
+	}
+
+	cpm_muram_free(cpm->dp_addr);
+	iounmap(cpm->i2c_reg);
+
+	if ((cpm->version == 1) && (!cpm->i2c_addr))
+		iounmap(cpm->i2c_ram);
+	if (cpm->version == 2)
+		cpm_muram_free(cpm->i2c_addr);
+}
+
+static int cpm_i2c_probe(struct platform_device *ofdev)
+{
+	int result, len;
+	struct cpm_i2c *cpm;
+	const u32 *data;
+
+	cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL);
+	if (!cpm)
+		return -ENOMEM;
+
+	cpm->ofdev = ofdev;
+
+	platform_set_drvdata(ofdev, cpm);
+
+	cpm->adap = cpm_ops;
+	i2c_set_adapdata(&cpm->adap, cpm);
+	cpm->adap.dev.parent = &ofdev->dev;
+	cpm->adap.dev.of_node = of_node_get(ofdev->dev.of_node);
+
+	result = cpm_i2c_setup(cpm);
+	if (result) {
+		dev_err(&ofdev->dev, "Unable to init hardware\n");
+		goto out_free;
+	}
+
+	/* register new adapter to i2c module... */
+
+	data = of_get_property(ofdev->dev.of_node, "linux,i2c-index", &len);
+	cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
+	result = i2c_add_numbered_adapter(&cpm->adap);
+
+	if (result < 0)
+		goto out_shut;
+
+	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
+		cpm->adap.name);
+
+	return 0;
+out_shut:
+	cpm_i2c_shutdown(cpm);
+out_free:
+	kfree(cpm);
+
+	return result;
+}
+
+static int cpm_i2c_remove(struct platform_device *ofdev)
+{
+	struct cpm_i2c *cpm = platform_get_drvdata(ofdev);
+
+	i2c_del_adapter(&cpm->adap);
+
+	cpm_i2c_shutdown(cpm);
+
+	kfree(cpm);
+
+	return 0;
+}
+
+static const struct of_device_id cpm_i2c_match[] = {
+	{
+		.compatible = "fsl,cpm1-i2c",
+	},
+	{
+		.compatible = "fsl,cpm2-i2c",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, cpm_i2c_match);
+
+static struct platform_driver cpm_i2c_driver = {
+	.probe		= cpm_i2c_probe,
+	.remove		= cpm_i2c_remove,
+	.driver = {
+		.name = "fsl-i2c-cpm",
+		.of_match_table = cpm_i2c_match,
+	},
+};
+
+module_platform_driver(cpm_i2c_driver);
+
+MODULE_AUTHOR("Jochen Friedrich <jochen@scram.de>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cros-ec-tunnel.c
new file mode 100644
index 0000000..eb76b76
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -0,0 +1,321 @@
+/*
+ *  Copyright (C) 2013 Google, Inc
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ * Expose an I2C passthrough to the ChromeOS EC.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define I2C_MAX_RETRIES 3
+
+/**
+ * struct ec_i2c_device - Driver data for I2C tunnel
+ *
+ * @dev: Device node
+ * @adap: I2C adapter
+ * @ec: Pointer to EC device
+ * @remote_bus: The EC bus number we tunnel to on the other side.
+ * @request_buf: Buffer for transmitting data; we expect most transfers to fit.
+ * @response_buf: Buffer for receiving data; we expect most transfers to fit.
+ */
+
+struct ec_i2c_device {
+	struct device *dev;
+	struct i2c_adapter adap;
+	struct cros_ec_device *ec;
+
+	u16 remote_bus;
+
+	u8 request_buf[256];
+	u8 response_buf[256];
+};
+
+/**
+ * ec_i2c_count_message - Count bytes needed for ec_i2c_construct_message
+ *
+ * @i2c_msgs: The i2c messages to read
+ * @num: The number of i2c messages.
+ *
+ * Returns the number of bytes the messages will take up.
+ */
+static int ec_i2c_count_message(const struct i2c_msg i2c_msgs[], int num)
+{
+	int i;
+	int size;
+
+	size = sizeof(struct ec_params_i2c_passthru);
+	size += num * sizeof(struct ec_params_i2c_passthru_msg);
+	for (i = 0; i < num; i++)
+		if (!(i2c_msgs[i].flags & I2C_M_RD))
+			size += i2c_msgs[i].len;
+
+	return size;
+}
+
+/**
+ * ec_i2c_construct_message - construct a message to go to the EC
+ *
+ * This function effectively stuffs the standard i2c_msg format of Linux into
+ * a format that the EC understands.
+ *
+ * @buf: The buffer to fill.  We assume that the buffer is big enough.
+ * @i2c_msgs: The i2c messages to read.
+ * @num: The number of i2c messages.
+ * @bus_num: The remote bus number we want to talk to.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
+				    int num, u16 bus_num)
+{
+	struct ec_params_i2c_passthru *params;
+	u8 *out_data;
+	int i;
+
+	out_data = buf + sizeof(struct ec_params_i2c_passthru) +
+		   num * sizeof(struct ec_params_i2c_passthru_msg);
+
+	params = (struct ec_params_i2c_passthru *)buf;
+	params->port = bus_num;
+	params->num_msgs = num;
+	for (i = 0; i < num; i++) {
+		const struct i2c_msg *i2c_msg = &i2c_msgs[i];
+		struct ec_params_i2c_passthru_msg *msg = &params->msg[i];
+
+		msg->len = i2c_msg->len;
+		msg->addr_flags = i2c_msg->addr;
+
+		if (i2c_msg->flags & I2C_M_TEN)
+			return -EINVAL;
+
+		if (i2c_msg->flags & I2C_M_RD) {
+			msg->addr_flags |= EC_I2C_FLAG_READ;
+		} else {
+			memcpy(out_data, i2c_msg->buf, msg->len);
+			out_data += msg->len;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response
+ *
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages expected.
+ *
+ * Returns the number of response bytes expeced.
+ */
+static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num)
+{
+	int size;
+	int i;
+
+	size = sizeof(struct ec_response_i2c_passthru);
+	for (i = 0; i < num; i++)
+		if (i2c_msgs[i].flags & I2C_M_RD)
+			size += i2c_msgs[i].len;
+
+	return size;
+}
+
+/**
+ * ec_i2c_parse_response - Parse a response from the EC
+ *
+ * We'll take the EC's response and copy it back into msgs.
+ *
+ * @buf: The buffer to parse.
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages; will be modified to include the actual
+ *	 number received.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[],
+				 int *num)
+{
+	const struct ec_response_i2c_passthru *resp;
+	const u8 *in_data;
+	int i;
+
+	in_data = buf + sizeof(struct ec_response_i2c_passthru);
+
+	resp = (const struct ec_response_i2c_passthru *)buf;
+	if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT)
+		return -ETIMEDOUT;
+	else if (resp->i2c_status & EC_I2C_STATUS_NAK)
+		return -ENXIO;
+	else if (resp->i2c_status & EC_I2C_STATUS_ERROR)
+		return -EIO;
+
+	/* Other side could send us back fewer messages, but not more */
+	if (resp->num_msgs > *num)
+		return -EPROTO;
+	*num = resp->num_msgs;
+
+	for (i = 0; i < *num; i++) {
+		struct i2c_msg *i2c_msg = &i2c_msgs[i];
+
+		if (i2c_msgs[i].flags & I2C_M_RD) {
+			memcpy(i2c_msg->buf, in_data, i2c_msg->len);
+			in_data += i2c_msg->len;
+		}
+	}
+
+	return 0;
+}
+
+static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
+		       int num)
+{
+	struct ec_i2c_device *bus = adap->algo_data;
+	struct device *dev = bus->dev;
+	const u16 bus_num = bus->remote_bus;
+	int request_len;
+	int response_len;
+	int alloc_size;
+	int result;
+	struct cros_ec_command *msg;
+
+	request_len = ec_i2c_count_message(i2c_msgs, num);
+	if (request_len < 0) {
+		dev_warn(dev, "Error constructing message %d\n", request_len);
+		return request_len;
+	}
+
+	response_len = ec_i2c_count_response(i2c_msgs, num);
+	if (response_len < 0) {
+		/* Unexpected; no errors should come when NULL response */
+		dev_warn(dev, "Error preparing response %d\n", response_len);
+		return response_len;
+	}
+
+	alloc_size = max(request_len, response_len);
+	msg = kmalloc(sizeof(*msg) + alloc_size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	result = ec_i2c_construct_message(msg->data, i2c_msgs, num, bus_num);
+	if (result) {
+		dev_err(dev, "Error constructing EC i2c message %d\n", result);
+		goto exit;
+	}
+
+	msg->version = 0;
+	msg->command = EC_CMD_I2C_PASSTHRU;
+	msg->outsize = request_len;
+	msg->insize = response_len;
+
+	result = cros_ec_cmd_xfer_status(bus->ec, msg);
+	if (result < 0) {
+		dev_err(dev, "Error transferring EC i2c message %d\n", result);
+		goto exit;
+	}
+
+	result = ec_i2c_parse_response(msg->data, i2c_msgs, &num);
+	if (result < 0)
+		goto exit;
+
+	/* Indicate success by saying how many messages were sent */
+	result = num;
+exit:
+	kfree(msg);
+	return result;
+}
+
+static u32 ec_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm ec_i2c_algorithm = {
+	.master_xfer	= ec_i2c_xfer,
+	.functionality	= ec_i2c_functionality,
+};
+
+static int ec_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct ec_i2c_device *bus = NULL;
+	u32 remote_bus;
+	int err;
+
+	if (!ec->cmd_xfer) {
+		dev_err(dev, "Missing sendrecv\n");
+		return -EINVAL;
+	}
+
+	bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL);
+	if (bus == NULL)
+		return -ENOMEM;
+
+	err = of_property_read_u32(np, "google,remote-bus", &remote_bus);
+	if (err) {
+		dev_err(dev, "Couldn't read remote-bus property\n");
+		return err;
+	}
+	bus->remote_bus = remote_bus;
+
+	bus->ec = ec;
+	bus->dev = dev;
+
+	bus->adap.owner = THIS_MODULE;
+	strlcpy(bus->adap.name, "cros-ec-i2c-tunnel", sizeof(bus->adap.name));
+	bus->adap.algo = &ec_i2c_algorithm;
+	bus->adap.algo_data = bus;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = np;
+	bus->adap.retries = I2C_MAX_RETRIES;
+
+	err = i2c_add_adapter(&bus->adap);
+	if (err)
+		return err;
+	platform_set_drvdata(pdev, bus);
+
+	return err;
+}
+
+static int ec_i2c_remove(struct platform_device *dev)
+{
+	struct ec_i2c_device *bus = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_i2c_of_match[] = {
+	{ .compatible = "google,cros-ec-i2c-tunnel" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
+#endif
+
+static struct platform_driver ec_i2c_tunnel_driver = {
+	.probe = ec_i2c_probe,
+	.remove = ec_i2c_remove,
+	.driver = {
+		.name = "cros-ec-i2c-tunnel",
+		.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
+	},
+};
+
+module_platform_driver(ec_i2c_tunnel_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EC I2C tunnel driver");
+MODULE_ALIAS("platform:cros-ec-i2c-tunnel");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-davinci.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-davinci.c
new file mode 100644
index 0000000..5cf670f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-davinci.c
@@ -0,0 +1,941 @@
+/*
+ * TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ *
+ * Updated by Vinod & Sudhakar Feb 2005
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/i2c-davinci.h>
+
+/* ----- global defines ----------------------------------------------- */
+
+#define DAVINCI_I2C_TIMEOUT	(1*HZ)
+#define DAVINCI_I2C_MAX_TRIES	2
+#define DAVINCI_I2C_OWN_ADDRESS	0x08
+#define I2C_DAVINCI_INTR_ALL    (DAVINCI_I2C_IMR_SCD | \
+				 DAVINCI_I2C_IMR_ARDY | \
+				 DAVINCI_I2C_IMR_NACK | \
+				 DAVINCI_I2C_IMR_AL)
+
+#define DAVINCI_I2C_OAR_REG	0x00
+#define DAVINCI_I2C_IMR_REG	0x04
+#define DAVINCI_I2C_STR_REG	0x08
+#define DAVINCI_I2C_CLKL_REG	0x0c
+#define DAVINCI_I2C_CLKH_REG	0x10
+#define DAVINCI_I2C_CNT_REG	0x14
+#define DAVINCI_I2C_DRR_REG	0x18
+#define DAVINCI_I2C_SAR_REG	0x1c
+#define DAVINCI_I2C_DXR_REG	0x20
+#define DAVINCI_I2C_MDR_REG	0x24
+#define DAVINCI_I2C_IVR_REG	0x28
+#define DAVINCI_I2C_EMDR_REG	0x2c
+#define DAVINCI_I2C_PSC_REG	0x30
+#define DAVINCI_I2C_FUNC_REG	0x48
+#define DAVINCI_I2C_DIR_REG	0x4c
+#define DAVINCI_I2C_DIN_REG	0x50
+#define DAVINCI_I2C_DOUT_REG	0x54
+#define DAVINCI_I2C_DSET_REG	0x58
+#define DAVINCI_I2C_DCLR_REG	0x5c
+
+#define DAVINCI_I2C_IVR_AAS	0x07
+#define DAVINCI_I2C_IVR_SCD	0x06
+#define DAVINCI_I2C_IVR_XRDY	0x05
+#define DAVINCI_I2C_IVR_RDR	0x04
+#define DAVINCI_I2C_IVR_ARDY	0x03
+#define DAVINCI_I2C_IVR_NACK	0x02
+#define DAVINCI_I2C_IVR_AL	0x01
+
+#define DAVINCI_I2C_STR_BB	BIT(12)
+#define DAVINCI_I2C_STR_RSFULL	BIT(11)
+#define DAVINCI_I2C_STR_SCD	BIT(5)
+#define DAVINCI_I2C_STR_ARDY	BIT(2)
+#define DAVINCI_I2C_STR_NACK	BIT(1)
+#define DAVINCI_I2C_STR_AL	BIT(0)
+
+#define DAVINCI_I2C_MDR_NACK	BIT(15)
+#define DAVINCI_I2C_MDR_STT	BIT(13)
+#define DAVINCI_I2C_MDR_STP	BIT(11)
+#define DAVINCI_I2C_MDR_MST	BIT(10)
+#define DAVINCI_I2C_MDR_TRX	BIT(9)
+#define DAVINCI_I2C_MDR_XA	BIT(8)
+#define DAVINCI_I2C_MDR_RM	BIT(7)
+#define DAVINCI_I2C_MDR_IRS	BIT(5)
+
+#define DAVINCI_I2C_IMR_AAS	BIT(6)
+#define DAVINCI_I2C_IMR_SCD	BIT(5)
+#define DAVINCI_I2C_IMR_XRDY	BIT(4)
+#define DAVINCI_I2C_IMR_RRDY	BIT(3)
+#define DAVINCI_I2C_IMR_ARDY	BIT(2)
+#define DAVINCI_I2C_IMR_NACK	BIT(1)
+#define DAVINCI_I2C_IMR_AL	BIT(0)
+
+/* set SDA and SCL as GPIO */
+#define DAVINCI_I2C_FUNC_PFUNC0	BIT(0)
+
+/* set SCL as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR0	BIT(0)
+/* set SDA as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR1	BIT(1)
+
+/* read SCL GPIO level */
+#define DAVINCI_I2C_DIN_PDIN0 BIT(0)
+/* read SDA GPIO level */
+#define DAVINCI_I2C_DIN_PDIN1 BIT(1)
+
+/*set the SCL GPIO high */
+#define DAVINCI_I2C_DSET_PDSET0	BIT(0)
+/*set the SDA GPIO high */
+#define DAVINCI_I2C_DSET_PDSET1	BIT(1)
+
+/* set the SCL GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR0	BIT(0)
+/* set the SDA GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR1	BIT(1)
+
+struct davinci_i2c_dev {
+	struct device           *dev;
+	void __iomem		*base;
+	struct completion	cmd_complete;
+	struct clk              *clk;
+	int			cmd_err;
+	u8			*buf;
+	size_t			buf_len;
+	int			irq;
+	int			stop;
+	u8			terminate;
+	struct i2c_adapter	adapter;
+#ifdef CONFIG_CPU_FREQ
+	struct completion	xfr_complete;
+	struct notifier_block	freq_transition;
+#endif
+	struct davinci_i2c_platform_data *pdata;
+};
+
+/* default platform data to use if not supplied in the platform_device */
+static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
+	.bus_freq	= 100,
+	.bus_delay	= 0,
+};
+
+static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
+					 int reg, u16 val)
+{
+	writew_relaxed(val, i2c_dev->base + reg);
+}
+
+static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
+{
+	return readw_relaxed(i2c_dev->base + reg);
+}
+
+static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
+								int val)
+{
+	u16 w;
+
+	w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
+	if (!val)	/* put I2C into reset */
+		w &= ~DAVINCI_I2C_MDR_IRS;
+	else		/* take I2C out of reset */
+		w |= DAVINCI_I2C_MDR_IRS;
+
+	davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
+}
+
+static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
+{
+	struct davinci_i2c_platform_data *pdata = dev->pdata;
+	u16 psc;
+	u32 clk;
+	u32 d;
+	u32 clkh;
+	u32 clkl;
+	u32 input_clock = clk_get_rate(dev->clk);
+	struct device_node *of_node = dev->dev->of_node;
+
+	/* NOTE: I2C Clock divider programming info
+	 * As per I2C specs the following formulas provide prescaler
+	 * and low/high divider values
+	 * input clk --> PSC Div -----------> ICCL/H Div --> output clock
+	 *                       module clk
+	 *
+	 * output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ]
+	 *
+	 * Thus,
+	 * (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d;
+	 *
+	 * where if PSC == 0, d = 7,
+	 *       if PSC == 1, d = 6
+	 *       if PSC > 1 , d = 5
+	 *
+	 * Note:
+	 * d is always 6 on Keystone I2C controller
+	 */
+
+	/*
+	 * Both Davinci and current Keystone User Guides recommend a value
+	 * between 7MHz and 12MHz. In reality 7MHz module clock doesn't
+	 * always produce enough margin between SDA and SCL transitions.
+	 * Measurements show that the higher the module clock is, the
+	 * bigger is the margin, providing more reliable communication.
+	 * So we better target for 12MHz.
+	 */
+	psc = (input_clock / 12000000) - 1;
+	if ((input_clock / (psc + 1)) > 12000000)
+		psc++;	/* better to run under spec than over */
+	d = (psc >= 2) ? 5 : 7 - psc;
+
+	if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
+		d = 6;
+
+	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
+	/* Avoid driving the bus too fast because of rounding errors above */
+	if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
+		clk++;
+	/*
+	 * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
+	 * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
+	 * to LOW ratio as 1 to 2 is more safe.
+	 */
+	if (pdata->bus_freq > 100)
+		clkl = (clk << 1) / 3;
+	else
+		clkl = (clk >> 1);
+	/*
+	 * It's not always possible to have 1 to 2 ratio when d=7, so fall back
+	 * to minimal possible clkh in this case.
+	 *
+	 * Note:
+	 * CLKH is not allowed to be 0, in this case I2C clock is not generated
+	 * at all
+	 */
+	if (clk > clkl + d) {
+		clkh = clk - clkl - d;
+		clkl -= d;
+	} else {
+		clkh = 1;
+		clkl = clk - (d << 1);
+	}
+
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+
+	dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
+}
+
+/*
+ * This function configures I2C and brings I2C out of reset.
+ * This function is called during I2C init function. This function
+ * also gets called if I2C encounters any errors.
+ */
+static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+{
+	struct davinci_i2c_platform_data *pdata = dev->pdata;
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(dev, 0);
+
+	/* compute clock dividers */
+	i2c_davinci_calc_clk_dividers(dev);
+
+	/* Respond at reserved "SMBus Host" slave address" (and zero);
+	 * we seem to have no option to not respond...
+	 */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, DAVINCI_I2C_OWN_ADDRESS);
+
+	dev_dbg(dev->dev, "PSC  = %d\n",
+		davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
+	dev_dbg(dev->dev, "CLKL = %d\n",
+		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
+	dev_dbg(dev->dev, "CLKH = %d\n",
+		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
+	dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
+		pdata->bus_freq, pdata->bus_delay);
+
+
+	/* Take the I2C module out of reset: */
+	davinci_i2c_reset_ctrl(dev, 1);
+
+	/* Enable interrupts */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
+
+	return 0;
+}
+
+/*
+ * This routine does i2c bus recovery by using i2c_generic_gpio_recovery
+ * which is provided by I2C Bus recovery infrastructure.
+ */
+static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	/* Disable interrupts */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0);
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(dev, 0);
+}
+
+static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	i2c_davinci_init(dev);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
+	.recover_bus = i2c_generic_gpio_recovery,
+	.prepare_recovery = davinci_i2c_prepare_recovery,
+	.unprepare_recovery = davinci_i2c_unprepare_recovery,
+};
+
+static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	if (val)
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DSET_REG,
+				      DAVINCI_I2C_DSET_PDSET0);
+	else
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DCLR_REG,
+				      DAVINCI_I2C_DCLR_PDCLR0);
+}
+
+static int davinci_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	int val;
+
+	/* read the state of SCL */
+	val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+	return val & DAVINCI_I2C_DIN_PDIN0;
+}
+
+static int davinci_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	int val;
+
+	/* read the state of SDA */
+	val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+	return val & DAVINCI_I2C_DIN_PDIN1;
+}
+
+static void davinci_i2c_scl_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	davinci_i2c_prepare_recovery(adap);
+
+	/* SCL output, SDA input */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_DIR_REG, DAVINCI_I2C_DIR_PDIR0);
+
+	/* change to GPIO mode */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG,
+			      DAVINCI_I2C_FUNC_PFUNC0);
+}
+
+static void davinci_i2c_scl_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	/* change back to I2C mode */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 0);
+
+	davinci_i2c_unprepare_recovery(adap);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_scl_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.set_scl = davinci_i2c_set_scl,
+	.get_scl = davinci_i2c_get_scl,
+	.get_sda = davinci_i2c_get_sda,
+	.prepare_recovery = davinci_i2c_scl_prepare_recovery,
+	.unprepare_recovery = davinci_i2c_scl_unprepare_recovery,
+};
+
+/*
+ * Waiting for bus not busy
+ */
+static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev)
+{
+	unsigned long timeout = jiffies + dev->adapter.timeout;
+
+	do {
+		if (!(davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB))
+			return 0;
+		schedule_timeout_uninterruptible(1);
+	} while (time_before_eq(jiffies, timeout));
+
+	dev_warn(dev->dev, "timeout waiting for bus ready\n");
+	i2c_recover_bus(&dev->adapter);
+
+	/*
+	 * if bus is still "busy" here, it's most probably a HW problem like
+	 * short-circuit
+	 */
+	if (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB)
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Low level master read/write transaction. This function is called
+ * from i2c_davinci_xfer.
+ */
+static int
+i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	struct davinci_i2c_platform_data *pdata = dev->pdata;
+	u32 flag;
+	u16 w;
+	unsigned long time_left;
+
+	if (msg->addr == DAVINCI_I2C_OWN_ADDRESS) {
+		dev_warn(dev->dev, "transfer to own address aborted\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	/* Introduce a delay, required for some boards (e.g Davinci EVM) */
+	if (pdata->bus_delay)
+		udelay(pdata->bus_delay);
+
+	/* set the slave address */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
+
+	dev->buf = msg->buf;
+	dev->buf_len = msg->len;
+	dev->stop = stop;
+
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
+
+	reinit_completion(&dev->cmd_complete);
+	dev->cmd_err = 0;
+
+	/* Take I2C out of reset and configure it as master */
+	flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
+
+	/* if the slave address is ten bit address, enable XA bit */
+	if (msg->flags & I2C_M_TEN)
+		flag |= DAVINCI_I2C_MDR_XA;
+	if (!(msg->flags & I2C_M_RD))
+		flag |= DAVINCI_I2C_MDR_TRX;
+	if (msg->len == 0)
+		flag |= DAVINCI_I2C_MDR_RM;
+
+	/* Enable receive or transmit interrupts */
+	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
+	if (msg->flags & I2C_M_RD)
+		w |= DAVINCI_I2C_IMR_RRDY;
+	else
+		w |= DAVINCI_I2C_IMR_XRDY;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
+
+	dev->terminate = 0;
+
+	/*
+	 * Write mode register first as needed for correct behaviour
+	 * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
+	 * occurring before we have loaded DXR
+	 */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
+	/*
+	 * First byte should be set here, not after interrupt,
+	 * because transmit-data-ready interrupt can come before
+	 * NACK-interrupt during sending of previous message and
+	 * ICDXR may have wrong data
+	 * It also saves us one interrupt, slightly faster
+	 */
+	if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
+		dev->buf_len--;
+	}
+
+	/* Set STT to begin transmit now DXR is loaded */
+	flag |= DAVINCI_I2C_MDR_STT;
+	if (stop && msg->len != 0)
+		flag |= DAVINCI_I2C_MDR_STP;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
+	time_left = wait_for_completion_timeout(&dev->cmd_complete,
+						dev->adapter.timeout);
+	if (!time_left) {
+		dev_err(dev->dev, "controller timed out\n");
+		i2c_recover_bus(adap);
+		dev->buf_len = 0;
+		return -ETIMEDOUT;
+	}
+	if (dev->buf_len) {
+		/* This should be 0 if all bytes were transferred
+		 * or dev->cmd_err denotes an error.
+		 */
+		dev_err(dev->dev, "abnormal termination buf_len=%i\n",
+			dev->buf_len);
+		dev->terminate = 1;
+		wmb();
+		dev->buf_len = 0;
+		return -EREMOTEIO;
+	}
+
+	/* no error */
+	if (likely(!dev->cmd_err))
+		return msg->len;
+
+	/* We have an error */
+	if (dev->cmd_err & DAVINCI_I2C_STR_AL) {
+		i2c_davinci_init(dev);
+		return -EIO;
+	}
+
+	if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return msg->len;
+		w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+		w |= DAVINCI_I2C_MDR_STP;
+		davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+		return -EREMOTEIO;
+	}
+	return -EIO;
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_davinci_xfer_msg
+ */
+static int
+i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+	int i;
+	int ret;
+
+	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+	ret = i2c_davinci_wait_bus_not_busy(dev);
+	if (ret < 0) {
+		dev_warn(dev->dev, "timeout waiting for bus ready\n");
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+		dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
+			ret);
+		if (ret < 0)
+			return ret;
+	}
+
+#ifdef CONFIG_CPU_FREQ
+	complete(&dev->xfr_complete);
+#endif
+
+	return num;
+}
+
+static u32 i2c_davinci_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static void terminate_read(struct davinci_i2c_dev *dev)
+{
+	u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	w |= DAVINCI_I2C_MDR_NACK;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+	/* Throw away data */
+	davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG);
+	if (!dev->terminate)
+		dev_err(dev->dev, "RDR IRQ while no data requested\n");
+}
+static void terminate_write(struct davinci_i2c_dev *dev)
+{
+	u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+	if (!dev->terminate)
+		dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
+{
+	struct davinci_i2c_dev *dev = dev_id;
+	u32 stat;
+	int count = 0;
+	u16 w;
+
+	while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
+		dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
+		if (count++ == 100) {
+			dev_warn(dev->dev, "Too much work in one IRQ\n");
+			break;
+		}
+
+		switch (stat) {
+		case DAVINCI_I2C_IVR_AL:
+			/* Arbitration lost, must retry */
+			dev->cmd_err |= DAVINCI_I2C_STR_AL;
+			dev->buf_len = 0;
+			complete(&dev->cmd_complete);
+			break;
+
+		case DAVINCI_I2C_IVR_NACK:
+			dev->cmd_err |= DAVINCI_I2C_STR_NACK;
+			dev->buf_len = 0;
+			complete(&dev->cmd_complete);
+			break;
+
+		case DAVINCI_I2C_IVR_ARDY:
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
+			if (((dev->buf_len == 0) && (dev->stop != 0)) ||
+			    (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
+				w = davinci_i2c_read_reg(dev,
+							 DAVINCI_I2C_MDR_REG);
+				w |= DAVINCI_I2C_MDR_STP;
+				davinci_i2c_write_reg(dev,
+						      DAVINCI_I2C_MDR_REG, w);
+			}
+			complete(&dev->cmd_complete);
+			break;
+
+		case DAVINCI_I2C_IVR_RDR:
+			if (dev->buf_len) {
+				*dev->buf++ =
+				    davinci_i2c_read_reg(dev,
+							 DAVINCI_I2C_DRR_REG);
+				dev->buf_len--;
+				if (dev->buf_len)
+					continue;
+
+				davinci_i2c_write_reg(dev,
+					DAVINCI_I2C_STR_REG,
+					DAVINCI_I2C_IMR_RRDY);
+			} else {
+				/* signal can terminate transfer */
+				terminate_read(dev);
+			}
+			break;
+
+		case DAVINCI_I2C_IVR_XRDY:
+			if (dev->buf_len) {
+				davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG,
+						      *dev->buf++);
+				dev->buf_len--;
+				if (dev->buf_len)
+					continue;
+
+				w = davinci_i2c_read_reg(dev,
+							 DAVINCI_I2C_IMR_REG);
+				w &= ~DAVINCI_I2C_IMR_XRDY;
+				davinci_i2c_write_reg(dev,
+						      DAVINCI_I2C_IMR_REG,
+						      w);
+			} else {
+				/* signal can terminate transfer */
+				terminate_write(dev);
+			}
+			break;
+
+		case DAVINCI_I2C_IVR_SCD:
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
+			complete(&dev->cmd_complete);
+			break;
+
+		case DAVINCI_I2C_IVR_AAS:
+			dev_dbg(dev->dev, "Address as slave interrupt\n");
+			break;
+
+		default:
+			dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+			break;
+		}
+	}
+
+	return count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
+				     unsigned long val, void *data)
+{
+	struct davinci_i2c_dev *dev;
+
+	dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+	if (val == CPUFREQ_PRECHANGE) {
+		wait_for_completion(&dev->xfr_complete);
+		davinci_i2c_reset_ctrl(dev, 0);
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		i2c_davinci_calc_clk_dividers(dev);
+		davinci_i2c_reset_ctrl(dev, 1);
+	}
+
+	return 0;
+}
+
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+	dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
+
+	return cpufreq_register_notifier(&dev->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+	cpufreq_unregister_notifier(&dev->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+	return 0;
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+}
+#endif
+
+static const struct i2c_algorithm i2c_davinci_algo = {
+	.master_xfer	= i2c_davinci_xfer,
+	.functionality	= i2c_davinci_func,
+};
+
+static const struct of_device_id davinci_i2c_of_match[] = {
+	{.compatible = "ti,davinci-i2c", },
+	{.compatible = "ti,keystone-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_i2c_of_match);
+
+static int davinci_i2c_probe(struct platform_device *pdev)
+{
+	struct davinci_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *mem;
+	int r, irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		if (!irq)
+			irq = -ENXIO;
+		if (irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"can't get irq resource ret=%d\n", irq);
+		return irq;
+	}
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct davinci_i2c_dev),
+			GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	init_completion(&dev->cmd_complete);
+#ifdef CONFIG_CPU_FREQ
+	init_completion(&dev->xfr_complete);
+#endif
+	dev->dev = &pdev->dev;
+	dev->irq = irq;
+	dev->pdata = dev_get_platdata(&pdev->dev);
+	platform_set_drvdata(pdev, dev);
+
+	if (!dev->pdata && pdev->dev.of_node) {
+		u32 prop;
+
+		dev->pdata = devm_kzalloc(&pdev->dev,
+			sizeof(struct davinci_i2c_platform_data), GFP_KERNEL);
+		if (!dev->pdata)
+			return -ENOMEM;
+
+		memcpy(dev->pdata, &davinci_i2c_platform_data_default,
+			sizeof(struct davinci_i2c_platform_data));
+		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+			&prop))
+			dev->pdata->bus_freq = prop / 1000;
+
+		dev->pdata->has_pfunc =
+			of_property_read_bool(pdev->dev.of_node,
+					      "ti,has-pfunc");
+	} else if (!dev->pdata) {
+		dev->pdata = &davinci_i2c_platform_data_default;
+	}
+
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+	clk_prepare_enable(dev->clk);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base)) {
+		r = PTR_ERR(dev->base);
+		goto err_unuse_clocks;
+	}
+
+	i2c_davinci_init(dev);
+
+	r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0,
+			pdev->name, dev);
+	if (r) {
+		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+		goto err_unuse_clocks;
+	}
+
+	r = i2c_davinci_cpufreq_register(dev);
+	if (r) {
+		dev_err(&pdev->dev, "failed to register cpufreq\n");
+		goto err_unuse_clocks;
+	}
+
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DEPRECATED;
+	strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
+	adap->algo = &i2c_davinci_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->timeout = DAVINCI_I2C_TIMEOUT;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	if (dev->pdata->has_pfunc)
+		adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
+	else if (dev->pdata->scl_pin) {
+		adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
+		adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
+		adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
+	}
+
+	adap->nr = pdev->id;
+	r = i2c_add_numbered_adapter(adap);
+	if (r)
+		goto err_unuse_clocks;
+
+	return 0;
+
+err_unuse_clocks:
+	clk_disable_unprepare(dev->clk);
+	dev->clk = NULL;
+	return r;
+}
+
+static int davinci_i2c_remove(struct platform_device *pdev)
+{
+	struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_davinci_cpufreq_deregister(dev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	clk_disable_unprepare(dev->clk);
+	dev->clk = NULL;
+
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int davinci_i2c_suspend(struct device *dev)
+{
+	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	/* put I2C into reset */
+	davinci_i2c_reset_ctrl(i2c_dev, 0);
+	clk_disable_unprepare(i2c_dev->clk);
+
+	return 0;
+}
+
+static int davinci_i2c_resume(struct device *dev)
+{
+	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	clk_prepare_enable(i2c_dev->clk);
+	/* take I2C out of reset */
+	davinci_i2c_reset_ctrl(i2c_dev, 1);
+
+	return 0;
+}
+
+static const struct dev_pm_ops davinci_i2c_pm = {
+	.suspend        = davinci_i2c_suspend,
+	.resume         = davinci_i2c_resume,
+};
+
+#define davinci_i2c_pm_ops (&davinci_i2c_pm)
+#else
+#define davinci_i2c_pm_ops NULL
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_davinci");
+
+static struct platform_driver davinci_i2c_driver = {
+	.probe		= davinci_i2c_probe,
+	.remove		= davinci_i2c_remove,
+	.driver		= {
+		.name	= "i2c_davinci",
+		.pm	= davinci_i2c_pm_ops,
+		.of_match_table = davinci_i2c_of_match,
+	},
+};
+
+/* I2C may be needed to bring up other drivers */
+static int __init davinci_i2c_init_driver(void)
+{
+	return platform_driver_register(&davinci_i2c_driver);
+}
+subsys_initcall(davinci_i2c_init_driver);
+
+static void __exit davinci_i2c_exit_driver(void)
+{
+	platform_driver_unregister(&davinci_i2c_driver);
+}
+module_exit(davinci_i2c_exit_driver);
+
+MODULE_AUTHOR("Texas Instruments India");
+MODULE_DESCRIPTION("TI DaVinci I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-baytrail.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-baytrail.c
new file mode 100644
index 0000000..dbda8c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -0,0 +1,187 @@
+/*
+ * Intel BayTrail PMIC I2C bus semaphore implementaion
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/pm_qos.h>
+
+#include <asm/iosf_mbi.h>
+
+#include "i2c-designware-core.h"
+
+#define SEMAPHORE_TIMEOUT	500
+#define PUNIT_SEMAPHORE		0x7
+#define PUNIT_SEMAPHORE_CHT	0x10e
+#define PUNIT_SEMAPHORE_BIT	BIT(0)
+#define PUNIT_SEMAPHORE_ACQUIRE	BIT(1)
+
+static unsigned long acquired;
+
+static u32 get_sem_addr(struct dw_i2c_dev *dev)
+{
+	if (dev->flags & MODEL_CHERRYTRAIL)
+		return PUNIT_SEMAPHORE_CHT;
+	else
+		return PUNIT_SEMAPHORE;
+}
+
+static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
+{
+	u32 addr = get_sem_addr(dev);
+	u32 data;
+	int ret;
+
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &data);
+	if (ret) {
+		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
+		return ret;
+	}
+
+	*sem = data & PUNIT_SEMAPHORE_BIT;
+
+	return 0;
+}
+
+static void reset_semaphore(struct dw_i2c_dev *dev)
+{
+	if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, get_sem_addr(dev),
+			    0, PUNIT_SEMAPHORE_BIT))
+		dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
+
+	pm_qos_update_request(&dev->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_END,
+						     NULL);
+	iosf_mbi_punit_release();
+}
+
+static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
+{
+	u32 addr;
+	u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
+	int ret;
+	unsigned long start, end;
+
+	might_sleep();
+
+	if (!dev || !dev->dev)
+		return -ENODEV;
+
+	if (!dev->release_lock)
+		return 0;
+
+	iosf_mbi_punit_acquire();
+	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_BEGIN,
+						     NULL);
+
+	/*
+	 * Disallow the CPU to enter C6 or C7 state, entering these states
+	 * requires the punit to talk to the pmic and if this happens while
+	 * we're holding the semaphore, the SoC hangs.
+	 */
+	pm_qos_update_request(&dev->pm_qos, 0);
+
+	addr = get_sem_addr(dev);
+
+	/* host driver writes to side band semaphore register */
+	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, addr, sem);
+	if (ret) {
+		dev_err(dev->dev, "iosf punit semaphore request failed\n");
+		goto out;
+	}
+
+	/* host driver waits for bit 0 to be set in semaphore register */
+	start = jiffies;
+	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
+	do {
+		ret = get_sem(dev, &sem);
+		if (!ret && sem) {
+			acquired = jiffies;
+			dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
+				jiffies_to_msecs(jiffies - start));
+			return 0;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(jiffies, end));
+
+	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
+out:
+	reset_semaphore(dev);
+
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &sem);
+	if (ret)
+		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
+	else
+		dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
+
+	WARN_ON(1);
+
+	return -ETIMEDOUT;
+}
+
+static void baytrail_i2c_release(struct dw_i2c_dev *dev)
+{
+	if (!dev || !dev->dev)
+		return;
+
+	if (!dev->acquire_lock)
+		return;
+
+	reset_semaphore(dev);
+	dev_dbg(dev->dev, "punit semaphore held for %ums\n",
+		jiffies_to_msecs(jiffies - acquired));
+}
+
+int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
+{
+	acpi_status status;
+	unsigned long long shared_host = 0;
+	acpi_handle handle;
+
+	if (!dev || !dev->dev)
+		return 0;
+
+	handle = ACPI_HANDLE(dev->dev);
+	if (!handle)
+		return 0;
+
+	status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
+	if (ACPI_FAILURE(status))
+		return 0;
+
+	if (!shared_host)
+		return 0;
+
+	if (!iosf_mbi_available())
+		return -EPROBE_DEFER;
+
+	dev_info(dev->dev, "I2C bus managed by PUNIT\n");
+	dev->acquire_lock = baytrail_i2c_acquire;
+	dev->release_lock = baytrail_i2c_release;
+	dev->pm_disabled = true;
+
+	pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
+	return 0;
+}
+
+void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
+{
+	if (dev->acquire_lock)
+		pm_qos_remove_request(&dev->pm_qos);
+}
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-common.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-common.c
new file mode 100644
index 0000000..d1a6937
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-common.c
@@ -0,0 +1,281 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static char *abort_sources[] = {
+	[ABRT_7B_ADDR_NOACK] =
+		"slave address not acknowledged (7bit mode)",
+	[ABRT_10ADDR1_NOACK] =
+		"first address byte not acknowledged (10bit mode)",
+	[ABRT_10ADDR2_NOACK] =
+		"second address byte not acknowledged (10bit mode)",
+	[ABRT_TXDATA_NOACK] =
+		"data not acknowledged",
+	[ABRT_GCALL_NOACK] =
+		"no acknowledgement for a general call",
+	[ABRT_GCALL_READ] =
+		"read after general call",
+	[ABRT_SBYTE_ACKDET] =
+		"start byte acknowledged",
+	[ABRT_SBYTE_NORSTRT] =
+		"trying to send start byte when restart is disabled",
+	[ABRT_10B_RD_NORSTRT] =
+		"trying to read when restart is disabled (10bit mode)",
+	[ABRT_MASTER_DIS] =
+		"trying to use disabled adapter",
+	[ARB_LOST] =
+		"lost arbitration",
+	[ABRT_SLAVE_FLUSH_TXFIFO] =
+		"read command so flush old data in the TX FIFO",
+	[ABRT_SLAVE_ARBLOST] =
+		"slave lost the bus while transmitting data to a remote master",
+	[ABRT_SLAVE_RD_INTX] =
+		"incorrect slave-transmitter mode configuration",
+};
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+	u32 value;
+
+	if (dev->flags & ACCESS_16BIT)
+		value = readw_relaxed(dev->base + offset) |
+			(readw_relaxed(dev->base + offset + 2) << 16);
+	else
+		value = readl_relaxed(dev->base + offset);
+
+	if (dev->flags & ACCESS_SWAP)
+		return swab32(value);
+	else
+		return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+	if (dev->flags & ACCESS_SWAP)
+		b = swab32(b);
+
+	if (dev->flags & ACCESS_16BIT) {
+		writew_relaxed((u16)b, dev->base + offset);
+		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
+	} else {
+		writel_relaxed(b, dev->base + offset);
+	}
+}
+
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+	/*
+	 * DesignWare I2C core doesn't seem to have solid strategy to meet
+	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
+	 * will result in violation of the tHD;STA spec.
+	 */
+	if (cond)
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+		 *
+		 * This is based on the DW manuals, and represents an ideal
+		 * configuration.  The resulting I2C bus speed will be
+		 * faster than any of the others.
+		 *
+		 * If your hardware is free from tHD;STA issue, try this one.
+		 */
+		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+	else
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+		 *
+		 * This is just experimental rule; the tHD;STA period turned
+		 * out to be proportinal to (_HCNT + 3).  With this setting,
+		 * we could meet both tHIGH and tHD;STA timing specs.
+		 *
+		 * If unsure, you'd better to take this alternative.
+		 *
+		 * The reason why we need to take into account "tf" here,
+		 * is the same as described in i2c_dw_scl_lcnt().
+		 */
+		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+			- 3 + offset;
+}
+
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+	/*
+	 * Conditional expression:
+	 *
+	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+	 *
+	 * DW I2C core starts counting the SCL CNTs for the LOW period
+	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+	 * In order to meet the tLOW timing spec, we need to take into
+	 * account the fall time of SCL signal (tf).  Default tf value
+	 * should be 0.3 us, for safety.
+	 */
+	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+}
+
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+	dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
+	int timeout = 100;
+
+	do {
+		__i2c_dw_enable(dev, enable);
+		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+			return;
+
+		/*
+		 * Wait 10 times the signaling period of the highest I2C
+		 * transfer supported by the driver (for 400KHz this is
+		 * 25us) as described in the DesignWare I2C databook.
+		 */
+		usleep_range(25, 250);
+	} while (timeout--);
+
+	dev_warn(dev->dev, "timeout in %sabling adapter\n",
+		 enable ? "en" : "dis");
+}
+
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
+{
+	/*
+	 * Clock is not necessary if we got LCNT/HCNT values directly from
+	 * the platform code.
+	 */
+	if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
+		return 0;
+	return dev->get_clk_rate_khz(dev);
+}
+
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev->acquire_lock)
+		return 0;
+
+	ret = dev->acquire_lock(dev);
+	if (!ret)
+		return 0;
+
+	dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+	return ret;
+}
+
+void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+	if (dev->release_lock)
+		dev->release_lock(dev);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+	int timeout = TIMEOUT;
+
+	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+		if (timeout <= 0) {
+			dev_warn(dev->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		usleep_range(1000, 1100);
+	}
+
+	return 0;
+}
+
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+	unsigned long abort_source = dev->abort_source;
+	int i;
+
+	if (abort_source & DW_IC_TX_ABRT_NOACK) {
+		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+			dev_dbg(dev->dev,
+				"%s: %s\n", __func__, abort_sources[i]);
+		return -EREMOTEIO;
+	}
+
+	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+	if (abort_source & DW_IC_TX_ARB_LOST)
+		return -EAGAIN;
+	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+		return -EINVAL; /* wrong msgs[] data */
+	else
+		return -EIO;
+}
+
+u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	return dev->functionality;
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+	/* Disable controller */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Disable all interupts */
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+	dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+	return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-core.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-core.h
new file mode 100644
index 0000000..9fee4c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-core.h
@@ -0,0 +1,324 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_qos.h>
+
+#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
+					I2C_FUNC_SMBUS_BYTE |		\
+					I2C_FUNC_SMBUS_BYTE_DATA |	\
+					I2C_FUNC_SMBUS_WORD_DATA |	\
+					I2C_FUNC_SMBUS_BLOCK_DATA |	\
+					I2C_FUNC_SMBUS_I2C_BLOCK)
+
+#define DW_IC_CON_MASTER		0x1
+#define DW_IC_CON_SPEED_STD		0x2
+#define DW_IC_CON_SPEED_FAST		0x4
+#define DW_IC_CON_SPEED_HIGH		0x6
+#define DW_IC_CON_SPEED_MASK		0x6
+#define DW_IC_CON_10BITADDR_SLAVE		0x8
+#define DW_IC_CON_10BITADDR_MASTER	0x10
+#define DW_IC_CON_RESTART_EN		0x20
+#define DW_IC_CON_SLAVE_DISABLE		0x40
+#define DW_IC_CON_STOP_DET_IFADDRESSED		0x80
+#define DW_IC_CON_TX_EMPTY_CTRL		0x100
+#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL		0x200
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON		0x0
+#define DW_IC_TAR		0x4
+#define DW_IC_SAR		0x8
+#define DW_IC_DATA_CMD		0x10
+#define DW_IC_SS_SCL_HCNT	0x14
+#define DW_IC_SS_SCL_LCNT	0x18
+#define DW_IC_FS_SCL_HCNT	0x1c
+#define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_HS_SCL_HCNT	0x24
+#define DW_IC_HS_SCL_LCNT	0x28
+#define DW_IC_INTR_STAT		0x2c
+#define DW_IC_INTR_MASK		0x30
+#define DW_IC_RAW_INTR_STAT	0x34
+#define DW_IC_RX_TL		0x38
+#define DW_IC_TX_TL		0x3c
+#define DW_IC_CLR_INTR		0x40
+#define DW_IC_CLR_RX_UNDER	0x44
+#define DW_IC_CLR_RX_OVER	0x48
+#define DW_IC_CLR_TX_OVER	0x4c
+#define DW_IC_CLR_RD_REQ	0x50
+#define DW_IC_CLR_TX_ABRT	0x54
+#define DW_IC_CLR_RX_DONE	0x58
+#define DW_IC_CLR_ACTIVITY	0x5c
+#define DW_IC_CLR_STOP_DET	0x60
+#define DW_IC_CLR_START_DET	0x64
+#define DW_IC_CLR_GEN_CALL	0x68
+#define DW_IC_ENABLE		0x6c
+#define DW_IC_STATUS		0x70
+#define DW_IC_TXFLR		0x74
+#define DW_IC_RXFLR		0x78
+#define DW_IC_SDA_HOLD		0x7c
+#define DW_IC_TX_ABRT_SOURCE	0x80
+#define DW_IC_ENABLE_STATUS	0x9c
+#define DW_IC_CLR_RESTART_DET	0xa8
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_VERSION	0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
+#define DW_IC_COMP_TYPE		0xfc
+#define DW_IC_COMP_TYPE_VALUE	0x44570140
+
+#define DW_IC_INTR_RX_UNDER	0x001
+#define DW_IC_INTR_RX_OVER	0x002
+#define DW_IC_INTR_RX_FULL	0x004
+#define DW_IC_INTR_TX_OVER	0x008
+#define DW_IC_INTR_TX_EMPTY	0x010
+#define DW_IC_INTR_RD_REQ	0x020
+#define DW_IC_INTR_TX_ABRT	0x040
+#define DW_IC_INTR_RX_DONE	0x080
+#define DW_IC_INTR_ACTIVITY	0x100
+#define DW_IC_INTR_STOP_DET	0x200
+#define DW_IC_INTR_START_DET	0x400
+#define DW_IC_INTR_GEN_CALL	0x800
+#define DW_IC_INTR_RESTART_DET	0x1000
+
+#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
+					 DW_IC_INTR_TX_ABRT | \
+					 DW_IC_INTR_STOP_DET)
+#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_TX_EMPTY)
+#define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_RX_DONE | \
+					 DW_IC_INTR_RX_UNDER | \
+					 DW_IC_INTR_RD_REQ)
+
+#define DW_IC_STATUS_ACTIVITY		0x1
+#define DW_IC_STATUS_TFE		BIT(2)
+#define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
+#define DW_IC_STATUS_SLAVE_ACTIVITY	BIT(6)
+
+#define DW_IC_SDA_HOLD_RX_SHIFT		16
+#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
+
+#define DW_IC_ERR_TX_ABRT	0x1
+
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE			0x0
+#define STATUS_WRITE_IN_PROGRESS	0x1
+#define STATUS_READ_IN_PROGRESS		0x2
+
+#define TIMEOUT			20 /* ms */
+
+/*
+ * operation modes
+ */
+#define DW_IC_MASTER		0
+#define DW_IC_SLAVE		1
+
+/*
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * Only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK	0
+#define ABRT_10ADDR1_NOACK	1
+#define ABRT_10ADDR2_NOACK	2
+#define ABRT_TXDATA_NOACK	3
+#define ABRT_GCALL_NOACK	4
+#define ABRT_GCALL_READ		5
+#define ABRT_SBYTE_ACKDET	7
+#define ABRT_SBYTE_NORSTRT	9
+#define ABRT_10B_RD_NORSTRT	10
+#define ABRT_MASTER_DIS		11
+#define ARB_LOST		12
+#define ABRT_SLAVE_FLUSH_TXFIFO	13
+#define ABRT_SLAVE_ARBLOST	14
+#define ABRT_SLAVE_RD_INTX	15
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
+#define DW_IC_RX_ABRT_SLAVE_RD_INTX	(1UL << ABRT_SLAVE_RD_INTX)
+#define DW_IC_RX_ABRT_SLAVE_ARBLOST	(1UL << ABRT_SLAVE_ARBLOST)
+#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	(1UL << ABRT_SLAVE_FLUSH_TXFIFO)
+
+#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
+					 DW_IC_TX_ABRT_TXDATA_NOACK | \
+					 DW_IC_TX_ABRT_GCALL_NOACK)
+
+
+/**
+ * struct dw_i2c_dev - private i2c-designware data
+ * @dev: driver model device node
+ * @base: IO registers pointer
+ * @cmd_complete: tx completion indicator
+ * @clk: input reference clock
+ * @slave: represent an I2C slave device
+ * @cmd_err: run time hadware error code
+ * @msgs: points to an array of messages currently being transferred
+ * @msgs_num: the number of elements in msgs
+ * @msg_write_idx: the element index of the current tx message in the msgs
+ *	array
+ * @tx_buf_len: the length of the current tx buffer
+ * @tx_buf: the current tx buffer
+ * @msg_read_idx: the element index of the current rx message in the msgs
+ *	array
+ * @rx_buf_len: the length of the current rx buffer
+ * @rx_buf: the current rx buffer
+ * @msg_err: error status of the current transfer
+ * @status: i2c master status, one of STATUS_*
+ * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @irq: interrupt number for the i2c master
+ * @adapter: i2c subsystem adapter node
+ * @slave_cfg: configuration for the slave device
+ * @tx_fifo_depth: depth of the hardware tx fifo
+ * @rx_fifo_depth: depth of the hardware rx fifo
+ * @rx_outstanding: current master-rx elements in tx fifo
+ * @clk_freq: bus clock frequency
+ * @ss_hcnt: standard speed HCNT value
+ * @ss_lcnt: standard speed LCNT value
+ * @fs_hcnt: fast speed HCNT value
+ * @fs_lcnt: fast speed LCNT value
+ * @fp_hcnt: fast plus HCNT value
+ * @fp_lcnt: fast plus LCNT value
+ * @hs_hcnt: high speed HCNT value
+ * @hs_lcnt: high speed LCNT value
+ * @pm_qos: pm_qos_request used while holding a hardware lock on the bus
+ * @acquire_lock: function to acquire a hardware lock on the bus
+ * @release_lock: function to release a hardware lock on the bus
+ * @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @disable: function to disable the controller
+ * @disable_int: function to disable all interrupts
+ * @init: function to initialize the I2C hardware
+ * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
+ *
+ * HCNT and LCNT parameters can be used if the platform knows more accurate
+ * values than the one computed based only on the input clock frequency.
+ * Leave them to be %0 if not used.
+ */
+struct dw_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	struct completion	cmd_complete;
+	struct clk		*clk;
+	struct reset_control	*rst;
+	struct i2c_client		*slave;
+	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
+	struct dw_pci_controller *controller;
+	int			cmd_err;
+	struct i2c_msg		*msgs;
+	int			msgs_num;
+	int			msg_write_idx;
+	u32			tx_buf_len;
+	u8			*tx_buf;
+	int			msg_read_idx;
+	u32			rx_buf_len;
+	u8			*rx_buf;
+	int			msg_err;
+	unsigned int		status;
+	u32			abort_source;
+	int			irq;
+	u32			flags;
+	struct i2c_adapter	adapter;
+	u32			functionality;
+	u32			master_cfg;
+	u32			slave_cfg;
+	unsigned int		tx_fifo_depth;
+	unsigned int		rx_fifo_depth;
+	int			rx_outstanding;
+	u32			clk_freq;
+	u32			sda_hold_time;
+	u32			sda_falling_time;
+	u32			scl_falling_time;
+	u16			ss_hcnt;
+	u16			ss_lcnt;
+	u16			fs_hcnt;
+	u16			fs_lcnt;
+	u16			fp_hcnt;
+	u16			fp_lcnt;
+	u16			hs_hcnt;
+	u16			hs_lcnt;
+	struct pm_qos_request	pm_qos;
+	int			(*acquire_lock)(struct dw_i2c_dev *dev);
+	void			(*release_lock)(struct dw_i2c_dev *dev);
+	bool			pm_disabled;
+	void			(*disable)(struct dw_i2c_dev *dev);
+	void			(*disable_int)(struct dw_i2c_dev *dev);
+	int			(*init)(struct dw_i2c_dev *dev);
+	int			mode;
+};
+
+#define ACCESS_SWAP		0x00000001
+#define ACCESS_16BIT		0x00000002
+#define ACCESS_INTR_MASK	0x00000004
+
+#define MODEL_CHERRYTRAIL	0x00000100
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
+void i2c_dw_release_lock(struct dw_i2c_dev *dev);
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+u32 i2c_dw_func(struct i2c_adapter *adap);
+void i2c_dw_disable(struct dw_i2c_dev *dev);
+void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+
+extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
+extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
+extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
+extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
+static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-master.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-master.c
new file mode 100644
index 0000000..4915fa3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-master.c
@@ -0,0 +1,675 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
+{
+	/* Configure Tx/Rx FIFO threshold levels */
+	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
+
+	/* Configure the I2C master */
+	dw_writel(dev, dev->master_cfg, DW_IC_CON);
+}
+
+/**
+ * i2c_dw_init() - Initialize the designware I2C master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_master(struct dw_i2c_dev *dev)
+{
+	u32 hcnt, lcnt;
+	u32 reg, comp_param1;
+	u32 sda_falling_time, scl_falling_time;
+	int ret;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+		/* Configure register endianess access */
+		dev->flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit */
+		dev->flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
+		i2c_dw_release_lock(dev);
+		return -ENODEV;
+	}
+
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+	/* Disable the adapter */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Set standard and fast speed deviders for high/low periods */
+
+	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+	/* Set SCL timing parameters for standard-mode */
+	if (dev->ss_hcnt && dev->ss_lcnt) {
+		hcnt = dev->ss_hcnt;
+		lcnt = dev->ss_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+					4000,	/* tHD;STA = tHIGH = 4.0 us */
+					sda_falling_time,
+					0,	/* 0: DW default, 1: Ideal */
+					0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+					4700,	/* tLOW = 4.7 us */
+					scl_falling_time,
+					0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	/* Set SCL timing parameters for fast-mode or fast-mode plus */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
+		hcnt = dev->fs_hcnt;
+		lcnt = dev->fs_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+					600,	/* tHD;STA = tHIGH = 0.6 us */
+					sda_falling_time,
+					0,	/* 0: DW default, 1: Ideal */
+					0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+					1300,	/* tLOW = 1.3 us */
+					scl_falling_time,
+					0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
+	/* Configure SDA Hold Time if required */
+	reg = dw_readl(dev, DW_IC_COMP_VERSION);
+	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+		if (!dev->sda_hold_time) {
+			/* Keep previous hold time setting if no one set it */
+			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+		}
+		/*
+		 * Workaround for avoiding TX arbitration lost in case I2C
+		 * slave pulls SDA down "too quickly" after falling egde of
+		 * SCL by enabling non-zero SDA RX hold. Specification says it
+		 * extends incoming SDA low to high transition while SCL is
+		 * high but it apprears to help also above issue.
+		 */
+		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+	} else {
+		dev_warn(dev->dev,
+			"Hardware too old to adjust SDA hold time.\n");
+	}
+
+	i2c_dw_configure_fifo_master(dev);
+	i2c_dw_release_lock(dev);
+
+	return 0;
+}
+
+static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
+{
+	struct i2c_msg *msgs = dev->msgs;
+	u32 ic_con, ic_tar = 0;
+
+	/* Disable the adapter */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* If the slave address is ten bit address, enable 10BITADDR */
+	ic_con = dw_readl(dev, DW_IC_CON);
+	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
+		ic_con |= DW_IC_CON_10BITADDR_MASTER;
+		/*
+		 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
+		 * mode has to be enabled via bit 12 of IC_TAR register.
+		 * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+		 * detected from registers.
+		 */
+		ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+	} else {
+		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+	}
+
+	dw_writel(dev, ic_con, DW_IC_CON);
+
+	/*
+	 * Set the slave (target) address and enable 10-bit addressing mode
+	 * if applicable.
+	 */
+	dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
+
+	/* Enforce disabled interrupts (due to HW issues) */
+	i2c_dw_disable_int(dev);
+
+	/* Enable the adapter */
+	__i2c_dw_enable(dev, true);
+
+	/* Dummy read to avoid the register getting stuck on Bay Trail */
+	dw_readl(dev, DW_IC_ENABLE_STATUS);
+
+	/* Clear and enable interrupts */
+	dw_readl(dev, DW_IC_CLR_INTR);
+	dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
+}
+
+/*
+ * Initiate (and continue) low level master read/write transaction.
+ * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * messages into the tx buffer.  Even if the size of i2c_msg data is
+ * longer than the size of the tx buffer, it handles everything.
+ */
+static void
+i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
+{
+	struct i2c_msg *msgs = dev->msgs;
+	u32 intr_mask;
+	int tx_limit, rx_limit;
+	u32 addr = msgs[dev->msg_write_idx].addr;
+	u32 buf_len = dev->tx_buf_len;
+	u8 *buf = dev->tx_buf;
+	bool need_restart = false;
+
+	intr_mask = DW_IC_INTR_MASTER_MASK;
+
+	for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
+		u32 flags = msgs[dev->msg_write_idx].flags;
+
+		/*
+		 * If target address has changed, we need to
+		 * reprogram the target address in the I2C
+		 * adapter when we are done with this transfer.
+		 */
+		if (msgs[dev->msg_write_idx].addr != addr) {
+			dev_err(dev->dev,
+				"%s: invalid target address\n", __func__);
+			dev->msg_err = -EINVAL;
+			break;
+		}
+
+		if (msgs[dev->msg_write_idx].len == 0) {
+			dev_err(dev->dev,
+				"%s: invalid message length\n", __func__);
+			dev->msg_err = -EINVAL;
+			break;
+		}
+
+		if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+			/* new i2c_msg */
+			buf = msgs[dev->msg_write_idx].buf;
+			buf_len = msgs[dev->msg_write_idx].len;
+
+			/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+			 * IC_RESTART_EN are set, we must manually
+			 * set restart bit between messages.
+			 */
+			if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
+					(dev->msg_write_idx > 0))
+				need_restart = true;
+		}
+
+		tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+		rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
+
+		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
+			u32 cmd = 0;
+
+			/*
+			 * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
+			 * manually set the stop bit. However, it cannot be
+			 * detected from the registers so we set it always
+			 * when writing/reading the last byte.
+			 */
+
+			/*
+			 * i2c-core always sets the buffer length of
+			 * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
+			 * be adjusted when receiving the first byte.
+			 * Thus we can't stop the transaction here.
+			 */
+			if (dev->msg_write_idx == dev->msgs_num - 1 &&
+			    buf_len == 1 && !(flags & I2C_M_RECV_LEN))
+				cmd |= BIT(9);
+
+			if (need_restart) {
+				cmd |= BIT(10);
+				need_restart = false;
+			}
+
+			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+
+				/* Avoid rx buffer overrun */
+				if (dev->rx_outstanding >= dev->rx_fifo_depth)
+					break;
+
+				dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
+				rx_limit--;
+				dev->rx_outstanding++;
+			} else
+				dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
+			tx_limit--; buf_len--;
+		}
+
+		dev->tx_buf = buf;
+		dev->tx_buf_len = buf_len;
+
+		/*
+		 * Because we don't know the buffer length in the
+		 * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
+		 * the transaction here.
+		 */
+		if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
+			/* more bytes to be written */
+			dev->status |= STATUS_WRITE_IN_PROGRESS;
+			break;
+		} else
+			dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+	}
+
+	/*
+	 * If i2c_msg index search is completed, we don't need TX_EMPTY
+	 * interrupt any more.
+	 */
+	if (dev->msg_write_idx == dev->msgs_num)
+		intr_mask &= ~DW_IC_INTR_TX_EMPTY;
+
+	if (dev->msg_err)
+		intr_mask = 0;
+
+	dw_writel(dev, intr_mask,  DW_IC_INTR_MASK);
+}
+
+static u8
+i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
+{
+	struct i2c_msg *msgs = dev->msgs;
+	u32 flags = msgs[dev->msg_read_idx].flags;
+
+	/*
+	 * Adjust the buffer length and mask the flag
+	 * after receiving the first byte.
+	 */
+	len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
+	dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
+	msgs[dev->msg_read_idx].len = len;
+	msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
+
+	return len;
+}
+
+static void
+i2c_dw_read(struct dw_i2c_dev *dev)
+{
+	struct i2c_msg *msgs = dev->msgs;
+	int rx_valid;
+
+	for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
+		u32 len;
+		u8 *buf;
+
+		if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+			continue;
+
+		if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+			len = msgs[dev->msg_read_idx].len;
+			buf = msgs[dev->msg_read_idx].buf;
+		} else {
+			len = dev->rx_buf_len;
+			buf = dev->rx_buf;
+		}
+
+		rx_valid = dw_readl(dev, DW_IC_RXFLR);
+
+		for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
+			u32 flags = msgs[dev->msg_read_idx].flags;
+
+			*buf = dw_readl(dev, DW_IC_DATA_CMD);
+			/* Ensure length byte is a valid value */
+			if (flags & I2C_M_RECV_LEN &&
+				*buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
+				len = i2c_dw_recv_len(dev, *buf);
+			}
+			buf++;
+			dev->rx_outstanding--;
+		}
+
+		if (len > 0) {
+			dev->status |= STATUS_READ_IN_PROGRESS;
+			dev->rx_buf_len = len;
+			dev->rx_buf = buf;
+			return;
+		} else
+			dev->status &= ~STATUS_READ_IN_PROGRESS;
+	}
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
+ */
+static int
+i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+	int ret;
+
+	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+	pm_runtime_get_sync(dev->dev);
+
+	reinit_completion(&dev->cmd_complete);
+	dev->msgs = msgs;
+	dev->msgs_num = num;
+	dev->cmd_err = 0;
+	dev->msg_write_idx = 0;
+	dev->msg_read_idx = 0;
+	dev->msg_err = 0;
+	dev->status = STATUS_IDLE;
+	dev->abort_source = 0;
+	dev->rx_outstanding = 0;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		goto done_nolock;
+
+	ret = i2c_dw_wait_bus_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	/* Start the transfers */
+	i2c_dw_xfer_init(dev);
+
+	/* Wait for tx to complete */
+	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
+		dev_err(dev->dev, "controller timed out\n");
+		/* i2c_dw_init implicitly disables the adapter */
+		i2c_dw_init_master(dev);
+		ret = -ETIMEDOUT;
+		goto done;
+	}
+
+	/*
+	 * We must disable the adapter before returning and signaling the end
+	 * of the current transfer. Otherwise the hardware might continue
+	 * generating interrupts which in turn causes a race condition with
+	 * the following transfer.  Needs some more investigation if the
+	 * additional interrupts are a hardware bug or this driver doesn't
+	 * handle them correctly yet.
+	 */
+	__i2c_dw_enable(dev, false);
+
+	if (dev->msg_err) {
+		ret = dev->msg_err;
+		goto done;
+	}
+
+	/* No error */
+	if (likely(!dev->cmd_err && !dev->status)) {
+		ret = num;
+		goto done;
+	}
+
+	/* We have an error */
+	if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
+		ret = i2c_dw_handle_tx_abort(dev);
+		goto done;
+	}
+
+	if (dev->status)
+		dev_err(dev->dev,
+			"transfer terminated early - interrupt latency too high?\n");
+
+	ret = -EIO;
+
+done:
+	i2c_dw_release_lock(dev);
+
+done_nolock:
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
+	return ret;
+}
+
+static const struct i2c_algorithm i2c_dw_algo = {
+	.master_xfer = i2c_dw_xfer,
+	.functionality = i2c_dw_func,
+};
+
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+	u32 stat;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * Ths unmasked raw version of interrupt status bits are available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = dw_readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_RX_UNDER)
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+	if (stat & DW_IC_INTR_RX_OVER)
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
+	if (stat & DW_IC_INTR_TX_OVER)
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
+	if (stat & DW_IC_INTR_RD_REQ)
+		dw_readl(dev, DW_IC_CLR_RD_REQ);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		/*
+		 * The IC_TX_ABRT_SOURCE register is cleared whenever
+		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
+		 */
+		dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+	}
+	if (stat & DW_IC_INTR_RX_DONE)
+		dw_readl(dev, DW_IC_CLR_RX_DONE);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+	if (stat & DW_IC_INTR_STOP_DET)
+		dw_readl(dev, DW_IC_CLR_STOP_DET);
+	if (stat & DW_IC_INTR_START_DET)
+		dw_readl(dev, DW_IC_CLR_START_DET);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+	return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
+ * occurs.
+ */
+static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
+{
+	u32 stat;
+
+	stat = i2c_dw_read_clear_intrbits(dev);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+		dev->status = STATUS_IDLE;
+
+		/*
+		 * Anytime TX_ABRT is set, the contents of the tx/rx
+		 * buffers are flushed. Make sure to skip them.
+		 */
+		dw_writel(dev, 0, DW_IC_INTR_MASK);
+		goto tx_aborted;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL)
+		i2c_dw_read(dev);
+
+	if (stat & DW_IC_INTR_TX_EMPTY)
+		i2c_dw_xfer_msg(dev);
+
+	/*
+	 * No need to modify or disable the interrupt mask here.
+	 * i2c_dw_xfer_msg() will take care of it according to
+	 * the current transmit status.
+	 */
+
+tx_aborted:
+	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
+		complete(&dev->cmd_complete);
+	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
+		/* Workaround to trigger pending interrupt */
+		stat = dw_readl(dev, DW_IC_INTR_MASK);
+		i2c_dw_disable_int(dev);
+		dw_writel(dev, stat, DW_IC_INTR_MASK);
+	}
+
+	return 0;
+}
+
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	u32 stat, enabled;
+
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+
+	i2c_dw_irq_handler_master(dev);
+
+	return IRQ_HANDLED;
+}
+
+int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+	struct i2c_adapter *adap = &dev->adapter;
+	unsigned long irq_flags;
+	int ret;
+
+	init_completion(&dev->cmd_complete);
+
+	dev->init = i2c_dw_init_master;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
+	if (ret)
+		return ret;
+
+	snprintf(adap->name, sizeof(adap->name),
+		 "Synopsys DesignWare I2C adapter");
+	adap->retries = 3;
+	adap->algo = &i2c_dw_algo;
+	adap->dev.parent = dev->dev;
+	i2c_set_adapdata(adap, dev);
+
+	if (dev->pm_disabled) {
+		dev_pm_syscore_device(dev->dev, true);
+		irq_flags = IRQF_NO_SUSPEND;
+	} else {
+		irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
+	}
+
+	i2c_dw_disable_int(dev);
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
+			       dev_name(dev->dev), dev);
+	if (ret) {
+		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+			dev->irq, ret);
+		return ret;
+	}
+
+	/*
+	 * Increment PM usage count during adapter registration in order to
+	 * avoid possible spurious runtime suspend when adapter device is
+	 * registered to the device core and immediate resume in case bus has
+	 * registered I2C slaves that do I2C transfers in their probe.
+	 */
+	pm_runtime_get_noresume(dev->dev);
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+	pm_runtime_put_noidle(dev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-pcidrv.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 0000000..86e1bd0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,360 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011, 2015, 2016 Intel Corporation.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "i2c-designware-core.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+	medfield,
+	merrifield,
+	baytrail,
+	cherrytrail,
+	haswell,
+};
+
+struct dw_scl_sda_cfg {
+	u32 ss_hcnt;
+	u32 fs_hcnt;
+	u32 ss_lcnt;
+	u32 fs_lcnt;
+	u32 sda_hold;
+};
+
+struct dw_pci_controller {
+	u32 bus_num;
+	u32 bus_cfg;
+	u32 tx_fifo_depth;
+	u32 rx_fifo_depth;
+	u32 clk_khz;
+	u32 functionality;
+	u32 flags;
+	struct dw_scl_sda_cfg *scl_sda_cfg;
+	int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
+};
+
+#define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |			\
+				DW_IC_CON_SLAVE_DISABLE |	\
+				DW_IC_CON_RESTART_EN)
+
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+	.ss_hcnt = 0x2f8,
+	.fs_hcnt = 0x87,
+	.ss_lcnt = 0x37b,
+	.fs_lcnt = 0x10a,
+};
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+	.ss_hcnt = 0x200,
+	.fs_hcnt = 0x55,
+	.ss_lcnt = 0x200,
+	.fs_lcnt = 0x99,
+	.sda_hold = 0x6,
+};
+
+/* Haswell HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg hsw_config = {
+	.ss_hcnt = 0x01b0,
+	.fs_hcnt = 0x48,
+	.ss_lcnt = 0x01fb,
+	.fs_lcnt = 0xa0,
+	.sda_hold = 0x9,
+};
+
+static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	switch (pdev->device) {
+	case 0x0817:
+		c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
+		c->bus_cfg |= DW_IC_CON_SPEED_STD;
+	case 0x0818:
+	case 0x0819:
+		c->bus_num = pdev->device - 0x817 + 3;
+		return 0;
+	case 0x082C:
+	case 0x082D:
+	case 0x082E:
+		c->bus_num = pdev->device - 0x82C + 0;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	/*
+	 * On Intel Merrifield the user visible i2c busses are enumerated
+	 * [1..7]. So, we add 1 to shift the default range. Besides that the
+	 * first PCI slot provides 4 functions, that's why we have to add 0 to
+	 * the first slot and 4 to the next one.
+	 */
+	switch (PCI_SLOT(pdev->devfn)) {
+	case 8:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+		return 0;
+	case 9:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static struct dw_pci_controller dw_pci_controllers[] = {
+	[medfield] = {
+		.bus_num = -1,
+		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.clk_khz      = 25000,
+		.setup = mfld_setup,
+	},
+	[merrifield] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 64,
+		.rx_fifo_depth = 64,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &mrfld_config,
+		.setup = mrfld_setup,
+	},
+	[baytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &byt_config,
+	},
+	[haswell] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &hsw_config,
+	},
+	[cherrytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.flags = MODEL_CHERRYTRAIL,
+		.scl_sda_cfg = &byt_config,
+	},
+};
+
+#ifdef CONFIG_PM
+static int i2c_dw_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	i_dev->disable(i_dev);
+
+	return 0;
+}
+
+static int i2c_dw_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	return i_dev->init(i_dev);
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
+			    i2c_dw_pci_resume, NULL);
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+	return dev->controller->clk_khz;
+}
+
+static int i2c_dw_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id)
+{
+	struct dw_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	int r;
+	struct dw_pci_controller *controller;
+	struct dw_scl_sda_cfg *cfg;
+
+	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
+		dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
+			id->driver_data);
+		return -EINVAL;
+	}
+
+	controller = &dw_pci_controllers[id->driver_data];
+
+	r = pcim_enable_device(pdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
+			r);
+		return r;
+	}
+
+	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+	if (r) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return r;
+	}
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->clk = NULL;
+	dev->controller = controller;
+	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+	dev->base = pcim_iomap_table(pdev)[0];
+	dev->dev = &pdev->dev;
+	dev->irq = pdev->irq;
+	dev->flags |= controller->flags;
+
+	if (controller->setup) {
+		r = controller->setup(pdev, controller);
+		if (r)
+			return r;
+	}
+
+	dev->functionality = controller->functionality |
+				DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->master_cfg = controller->bus_cfg;
+	if (controller->scl_sda_cfg) {
+		cfg = controller->scl_sda_cfg;
+		dev->ss_hcnt = cfg->ss_hcnt;
+		dev->fs_hcnt = cfg->fs_hcnt;
+		dev->ss_lcnt = cfg->ss_lcnt;
+		dev->fs_lcnt = cfg->fs_lcnt;
+		dev->sda_hold_time = cfg->sda_hold;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	dev->tx_fifo_depth = controller->tx_fifo_depth;
+	dev->rx_fifo_depth = controller->rx_fifo_depth;
+
+	adap = &dev->adapter;
+	adap->owner = THIS_MODULE;
+	adap->class = 0;
+	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+	adap->nr = controller->bus_num;
+
+	r = i2c_dw_probe(dev);
+	if (r)
+		return r;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static void i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+	dev->disable(dev);
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+
+	i2c_del_adapter(&dev->adapter);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+
+static const struct pci_device_id i2_designware_pci_ids[] = {
+	/* Medfield */
+	{ PCI_VDEVICE(INTEL, 0x0817), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0818), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0819), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082C), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082D), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082E), medfield },
+	/* Merrifield */
+	{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
+	{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
+	/* Baytrail */
+	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
+	/* Haswell */
+	{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
+	{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
+	/* Braswell / Cherrytrail */
+	{ PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
+	{ 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= i2_designware_pci_ids,
+	.probe		= i2c_dw_pci_probe,
+	.remove		= i2c_dw_pci_remove,
+	.driver         = {
+		.pm     = &i2c_dw_pm_ops,
+	},
+};
+
+module_pci_driver(dw_i2c_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-platdrv.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-platdrv.c
new file mode 100644
index 0000000..0e65b97
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -0,0 +1,510 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/acpi.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/reset.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "i2c-designware-core.h"
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+	return clk_get_rate(dev->clk)/1000;
+}
+
+#ifdef CONFIG_ACPI
+/*
+ * The HCNT/LCNT information coming from ACPI should be the most accurate
+ * for given platform. However, some systems get it wrong. On such systems
+ * we get better results by calculating those based on the input clock.
+ */
+static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
+	{
+		.ident = "Dell Inspiron 7348",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
+		},
+	},
+	{ }
+};
+
+static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
+			       u16 *hcnt, u16 *lcnt, u32 *sda_hold)
+{
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+	union acpi_object *obj;
+
+	if (dmi_check_system(dw_i2c_no_acpi_params))
+		return;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
+		return;
+
+	obj = (union acpi_object *)buf.pointer;
+	if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
+		const union acpi_object *objs = obj->package.elements;
+
+		*hcnt = (u16)objs[0].integer.value;
+		*lcnt = (u16)objs[1].integer.value;
+		*sda_hold = (u32)objs[2].integer.value;
+	}
+
+	kfree(buf.pointer);
+}
+
+static int dw_i2c_acpi_configure(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
+	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+	const struct acpi_device_id *id;
+	struct acpi_device *adev;
+	const char *uid;
+
+	dev->adapter.nr = -1;
+	dev->tx_fifo_depth = 32;
+	dev->rx_fifo_depth = 32;
+
+	/*
+	 * Try to get SDA hold time and *CNT values from an ACPI method for
+	 * selected speed modes.
+	 */
+	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
+	dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
+	dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
+	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->sda_hold_time = ss_ht;
+		break;
+	case 1000000:
+		dev->sda_hold_time = fp_ht;
+		break;
+	case 3400000:
+		dev->sda_hold_time = hs_ht;
+		break;
+	case 400000:
+	default:
+		dev->sda_hold_time = fs_ht;
+		break;
+	}
+
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id && id->driver_data)
+		dev->flags |= (u32)id->driver_data;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return -ENODEV;
+
+	/*
+	 * Cherrytrail I2C7 gets used for the PMIC which gets accessed
+	 * through ACPI opregions during late suspend / early resume
+	 * disable pm for it.
+	 */
+	uid = adev->pnp.unique_id;
+	if ((dev->flags & MODEL_CHERRYTRAIL) && !strcmp(uid, "7"))
+		dev->pm_disabled = true;
+
+	return 0;
+}
+
+static const struct acpi_device_id dw_i2c_acpi_match[] = {
+	{ "INT33C2", 0 },
+	{ "INT33C3", 0 },
+	{ "INT3432", 0 },
+	{ "INT3433", 0 },
+	{ "80860F41", 0 },
+	{ "808622C1", MODEL_CHERRYTRAIL },
+	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0010", ACCESS_INTR_MASK },
+	{ "AMDI0510", 0 },
+	{ "APMC0D0F", 0 },
+	{ "HISI02A1", 0 },
+	{ "HISI02A2", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
+#else
+static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
+
+static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			  DW_IC_CON_RESTART_EN;
+
+	dev->mode = DW_IC_MASTER;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->master_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
+
+	dev->mode = DW_IC_SLAVE;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
+static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
+{
+	if (IS_ERR(i_dev->clk))
+		return PTR_ERR(i_dev->clk);
+
+	if (prepare)
+		return clk_prepare_enable(i_dev->clk);
+
+	clk_disable_unprepare(i_dev->clk);
+	return 0;
+}
+
+static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
+{
+	u32 param, tx_fifo_depth, rx_fifo_depth;
+
+	/*
+	 * Try to detect the FIFO depth if not set by interface driver,
+	 * the depth could be from 2 to 256 from HW spec.
+	 */
+	param = i2c_dw_read_comp_param(dev);
+	tx_fifo_depth = ((param >> 16) & 0xff) + 1;
+	rx_fifo_depth = ((param >> 8)  & 0xff) + 1;
+	if (!dev->tx_fifo_depth) {
+		dev->tx_fifo_depth = tx_fifo_depth;
+		dev->rx_fifo_depth = rx_fifo_depth;
+		dev->adapter.nr = id;
+	} else if (tx_fifo_depth >= 2) {
+		dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
+				tx_fifo_depth);
+		dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
+				rx_fifo_depth);
+	}
+}
+
+static int dw_i2c_plat_probe(struct platform_device *pdev)
+{
+	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct i2c_adapter *adap;
+	struct dw_i2c_dev *dev;
+	u32 acpi_speed, ht = 0;
+	struct resource *mem;
+	int i, irq, ret;
+	const int supported_speeds[] = { 0, 100000, 400000, 1000000, 3400000 };
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
+
+	dev->dev = &pdev->dev;
+	dev->irq = irq;
+	platform_set_drvdata(pdev, dev);
+
+	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(dev->rst)) {
+		if (PTR_ERR(dev->rst) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+	} else {
+		reset_control_deassert(dev->rst);
+	}
+
+	if (pdata) {
+		dev->clk_freq = pdata->i2c_scl_freq;
+	} else {
+		device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
+					 &ht);
+		device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
+					 &dev->sda_falling_time);
+		device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
+					 &dev->scl_falling_time);
+		device_property_read_u32(&pdev->dev, "clock-frequency",
+					 &dev->clk_freq);
+	}
+
+	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+	/*
+	 * Some DSTDs use a non standard speed, round down to the lowest
+	 * standard speed.
+	 */
+	for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed < supported_speeds[i])
+			break;
+	}
+	acpi_speed = supported_speeds[i - 1];
+
+	/*
+	 * Find bus speed from the "clock-frequency" device property, ACPI
+	 * or by using fast mode if neither is set.
+	 */
+	if (acpi_speed && dev->clk_freq)
+		dev->clk_freq = min(dev->clk_freq, acpi_speed);
+	else if (acpi_speed || dev->clk_freq)
+		dev->clk_freq = max(dev->clk_freq, acpi_speed);
+	else
+		dev->clk_freq = 400000;
+
+	if (has_acpi_companion(&pdev->dev))
+		dw_i2c_acpi_configure(pdev);
+
+	/*
+	 * Only standard mode at 100kHz, fast mode at 400kHz,
+	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
+	 */
+	if (dev->clk_freq != 100000 && dev->clk_freq != 400000
+	    && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+		dev_err(&pdev->dev,
+			"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
+			dev->clk_freq);
+		ret = -EINVAL;
+		goto exit_reset;
+	}
+
+	ret = i2c_dw_probe_lock_support(dev);
+	if (ret)
+		goto exit_reset;
+
+	if (i2c_detect_slave_mode(&pdev->dev))
+		i2c_dw_configure_slave(dev);
+	else
+		i2c_dw_configure_master(dev);
+
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!i2c_dw_plat_prepare_clk(dev, true)) {
+		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+
+		if (!dev->sda_hold_time && ht)
+			dev->sda_hold_time = div_u64(
+				(u64)dev->get_clk_rate_khz(dev) * ht + 500000,
+				1000000);
+	}
+
+	dw_i2c_set_fifo_size(dev, pdev->id);
+
+	adap = &dev->adapter;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DEPRECATED;
+	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+	adap->dev.of_node = pdev->dev.of_node;
+
+	if (dev->pm_disabled) {
+		pm_runtime_forbid(&pdev->dev);
+	} else {
+		pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+		pm_runtime_use_autosuspend(&pdev->dev);
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+	}
+
+	if (dev->mode == DW_IC_SLAVE)
+		ret = i2c_dw_probe_slave(dev);
+	else
+		ret = i2c_dw_probe(dev);
+
+	if (ret)
+		goto exit_probe;
+
+	return ret;
+
+exit_probe:
+	if (!dev->pm_disabled)
+		pm_runtime_disable(&pdev->dev);
+exit_reset:
+	if (!IS_ERR_OR_NULL(dev->rst))
+		reset_control_assert(dev->rst);
+	return ret;
+}
+
+static int dw_i2c_plat_remove(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	dev->disable(dev);
+
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	if (!dev->pm_disabled)
+		pm_runtime_disable(&pdev->dev);
+	if (!IS_ERR_OR_NULL(dev->rst))
+		reset_control_assert(dev->rst);
+
+	i2c_dw_remove_lock_support(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id dw_i2c_of_match[] = {
+	{ .compatible = "snps,designware-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_prepare(struct device *dev)
+{
+	return pm_runtime_suspended(dev);
+}
+
+static void dw_i2c_plat_complete(struct device *dev)
+{
+	if (dev->power.direct_complete)
+		pm_request_resume(dev);
+}
+#else
+#define dw_i2c_plat_prepare	NULL
+#define dw_i2c_plat_complete	NULL
+#endif
+
+#ifdef CONFIG_PM
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	i_dev->disable(i_dev);
+	i2c_dw_plat_prepare_clk(i_dev, false);
+
+	return 0;
+}
+
+static int dw_i2c_plat_resume(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	i2c_dw_plat_prepare_clk(i_dev, true);
+	i_dev->init(i_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_suspend(struct device *dev)
+{
+	pm_runtime_resume(dev);
+	return dw_i2c_plat_runtime_suspend(dev);
+}
+#endif
+
+static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
+	.prepare = dw_i2c_plat_prepare,
+	.complete = dw_i2c_plat_complete,
+	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
+			   dw_i2c_plat_resume,
+			   NULL)
+};
+
+#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
+#else
+#define DW_I2C_DEV_PMOPS NULL
+#endif
+
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
+
+static struct platform_driver dw_i2c_driver = {
+	.probe = dw_i2c_plat_probe,
+	.remove = dw_i2c_plat_remove,
+	.driver		= {
+		.name	= "i2c_designware",
+		.of_match_table = of_match_ptr(dw_i2c_of_match),
+		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
+		.pm	= DW_I2C_DEV_PMOPS,
+	},
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+	return platform_driver_register(&dw_i2c_driver);
+}
+subsys_initcall(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+	platform_driver_unregister(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-slave.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-slave.c
new file mode 100644
index 0000000..fccf936
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-designware-slave.c
@@ -0,0 +1,396 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (slave only).
+ *
+ * Based on the Synopsys DesignWare I2C adapter driver (master).
+ *
+ * Copyright (C) 2016 Synopsys Inc.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
+{
+	/* Configure Tx/Rx FIFO threshold levels. */
+	dw_writel(dev, 0, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
+
+	/* Configure the I2C slave. */
+	dw_writel(dev, dev->slave_cfg, DW_IC_CON);
+	dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
+}
+
+/**
+ * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * @dev: device private data
+ *
+ * This function configures and enables the I2C in slave mode.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
+{
+	u32 sda_falling_time, scl_falling_time;
+	u32 reg, comp_param1;
+	u32 hcnt, lcnt;
+	int ret;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+		/* Configure register endianness access. */
+		dev->flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit. */
+		dev->flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
+		i2c_dw_release_lock(dev);
+		return -ENODEV;
+	}
+
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+	/* Disable the adapter. */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Set standard and fast speed deviders for high/low periods. */
+	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+	/* Set SCL timing parameters for standard-mode. */
+	if (dev->ss_hcnt && dev->ss_lcnt) {
+		hcnt = dev->ss_hcnt;
+		lcnt = dev->ss_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+				       4000,	/* tHD;STA = tHIGH = 4.0 us */
+				       sda_falling_time,
+				       0,	/* 0: DW default, 1: Ideal */
+				       0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+				       4700,	/* tLOW = 4.7 us */
+				       scl_falling_time,
+				       0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	/* Set SCL timing parameters for fast-mode or fast-mode plus. */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
+		hcnt = dev->fs_hcnt;
+		lcnt = dev->fs_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+				       600,	/* tHD;STA = tHIGH = 0.6 us */
+				       sda_falling_time,
+				       0,	/* 0: DW default, 1: Ideal */
+				       0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+				       1300,	/* tLOW = 1.3 us */
+				       scl_falling_time,
+				       0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
+	/* Configure SDA Hold Time if required. */
+	reg = dw_readl(dev, DW_IC_COMP_VERSION);
+	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+		if (!dev->sda_hold_time) {
+			/* Keep previous hold time setting if no one set it. */
+			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+		}
+		/*
+		 * Workaround for avoiding TX arbitration lost in case I2C
+		 * slave pulls SDA down "too quickly" after falling egde of
+		 * SCL by enabling non-zero SDA RX hold. Specification says it
+		 * extends incoming SDA low to high transition while SCL is
+		 * high but it apprears to help also above issue.
+		 */
+		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+	} else {
+		dev_warn(dev->dev,
+			 "Hardware too old to adjust SDA hold time.\n");
+	}
+
+	i2c_dw_configure_fifo_slave(dev);
+	i2c_dw_release_lock(dev);
+
+	return 0;
+}
+
+static int i2c_dw_reg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	if (dev->slave)
+		return -EBUSY;
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+	pm_runtime_get_sync(dev->dev);
+
+	/*
+	 * Set slave address in the IC_SAR register,
+	 * the address to which the DW_apb_i2c responds.
+	 */
+	__i2c_dw_enable(dev, false);
+	dw_writel(dev, slave->addr, DW_IC_SAR);
+	dev->slave = slave;
+
+	__i2c_dw_enable(dev, true);
+
+	dev->cmd_err = 0;
+	dev->msg_write_idx = 0;
+	dev->msg_read_idx = 0;
+	dev->msg_err = 0;
+	dev->status = STATUS_IDLE;
+	dev->abort_source = 0;
+	dev->rx_outstanding = 0;
+
+	return 0;
+}
+
+static int i2c_dw_unreg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	dev->disable_int(dev);
+	dev->disable(dev);
+	synchronize_irq(dev->irq);
+	dev->slave = NULL;
+	pm_runtime_put(dev->dev);
+
+	return 0;
+}
+
+static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
+{
+	u32 stat;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * Ths unmasked raw version of interrupt status bits are available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = dw_readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_TX_ABRT)
+		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+	if (stat & DW_IC_INTR_RX_UNDER)
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+	if (stat & DW_IC_INTR_RX_OVER)
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
+	if (stat & DW_IC_INTR_TX_OVER)
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
+	if (stat & DW_IC_INTR_RX_DONE)
+		dw_readl(dev, DW_IC_CLR_RX_DONE);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+	if (stat & DW_IC_INTR_STOP_DET)
+		dw_readl(dev, DW_IC_CLR_STOP_DET);
+	if (stat & DW_IC_INTR_START_DET)
+		dw_readl(dev, DW_IC_CLR_START_DET);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+	return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C slave interrupt
+ * occurs.
+ */
+
+static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
+{
+	u32 raw_stat, stat, enabled;
+	u8 val, slave_activity;
+
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
+		DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
+
+	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
+		return 0;
+
+	dev_dbg(dev->dev,
+		"%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
+		enabled, slave_activity, raw_stat, stat);
+
+	if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
+		i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
+
+	if (stat & DW_IC_INTR_RD_REQ) {
+		if (slave_activity) {
+			if (stat & DW_IC_INTR_RX_FULL) {
+				val = dw_readl(dev, DW_IC_DATA_CMD);
+
+				if (!i2c_slave_event(dev->slave,
+						     I2C_SLAVE_WRITE_RECEIVED,
+						     &val)) {
+					dev_vdbg(dev->dev, "Byte %X acked!",
+						 val);
+				}
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			} else {
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				dw_readl(dev, DW_IC_CLR_RX_UNDER);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			}
+			if (!i2c_slave_event(dev->slave,
+					     I2C_SLAVE_READ_REQUESTED,
+					     &val))
+				dw_writel(dev, val, DW_IC_DATA_CMD);
+		}
+	}
+
+	if (stat & DW_IC_INTR_RX_DONE) {
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
+				     &val))
+			dw_readl(dev, DW_IC_CLR_RX_DONE);
+
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+		return 1;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL) {
+		val = dw_readl(dev, DW_IC_DATA_CMD);
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
+				     &val))
+			dev_vdbg(dev->dev, "Byte %X acked!", val);
+	} else {
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+	}
+
+	return 1;
+}
+
+static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	int ret;
+
+	i2c_dw_read_clear_intrbits_slave(dev);
+	ret = i2c_dw_irq_handler_slave(dev);
+	if (ret > 0)
+		complete(&dev->cmd_complete);
+
+	return IRQ_RETVAL(ret);
+}
+
+static const struct i2c_algorithm i2c_dw_algo = {
+	.functionality = i2c_dw_func,
+	.reg_slave = i2c_dw_reg_slave,
+	.unreg_slave = i2c_dw_unreg_slave,
+};
+
+int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
+{
+	struct i2c_adapter *adap = &dev->adapter;
+	int ret;
+
+	init_completion(&dev->cmd_complete);
+
+	dev->init = i2c_dw_init_slave;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
+	if (ret)
+		return ret;
+
+	snprintf(adap->name, sizeof(adap->name),
+		 "Synopsys DesignWare I2C Slave adapter");
+	adap->retries = 3;
+	adap->algo = &i2c_dw_algo;
+	adap->dev.parent = dev->dev;
+	i2c_set_adapdata(adap, dev);
+
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
+			       IRQF_SHARED, dev_name(dev->dev), dev);
+	if (ret) {
+		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+			dev->irq, ret);
+		return ret;
+	}
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
+
+MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-digicolor.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-digicolor.c
new file mode 100644
index 0000000..50813a2
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-digicolor.c
@@ -0,0 +1,385 @@
+/*
+ * I2C bus driver for Conexant Digicolor SoCs
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Copyright (C) 2015 Paradox Innovation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_FREQ		100000
+#define TIMEOUT_MS		100
+
+#define II_CONTROL		0x0
+#define II_CONTROL_LOCAL_RESET	BIT(0)
+
+#define II_CLOCKTIME		0x1
+
+#define II_COMMAND		0x2
+#define II_CMD_START		1
+#define II_CMD_RESTART		2
+#define II_CMD_SEND_ACK		3
+#define II_CMD_GET_ACK		6
+#define II_CMD_GET_NOACK	7
+#define II_CMD_STOP		10
+#define II_COMMAND_GO		BIT(7)
+#define II_COMMAND_COMPLETION_STATUS(r)	(((r) >> 5) & 3)
+#define II_CMD_STATUS_NORMAL	0
+#define II_CMD_STATUS_ACK_GOOD	1
+#define II_CMD_STATUS_ACK_BAD	2
+#define II_CMD_STATUS_ABORT	3
+
+#define II_DATA			0x3
+#define II_INTFLAG_CLEAR	0x8
+#define II_INTENABLE		0xa
+
+struct dc_i2c {
+	struct i2c_adapter	adap;
+	struct device		*dev;
+	void __iomem		*regs;
+	struct clk		*clk;
+	unsigned int		frequency;
+
+	struct i2c_msg		*msg;
+	unsigned int		msgbuf_ptr;
+	int			last;
+	spinlock_t		lock;
+	struct completion	done;
+	int			state;
+	int			error;
+};
+
+enum {
+	STATE_IDLE,
+	STATE_START,
+	STATE_ADDR,
+	STATE_WRITE,
+	STATE_READ,
+	STATE_STOP,
+};
+
+static void dc_i2c_cmd(struct dc_i2c *i2c, u8 cmd)
+{
+	writeb_relaxed(cmd | II_COMMAND_GO, i2c->regs + II_COMMAND);
+}
+
+static u8 dc_i2c_addr_cmd(struct i2c_msg *msg)
+{
+	u8 addr = (msg->addr & 0x7f) << 1;
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	return addr;
+}
+
+static void dc_i2c_data(struct dc_i2c *i2c, u8 data)
+{
+	writeb_relaxed(data, i2c->regs + II_DATA);
+}
+
+static void dc_i2c_write_byte(struct dc_i2c *i2c, u8 byte)
+{
+	dc_i2c_data(i2c, byte);
+	dc_i2c_cmd(i2c, II_CMD_SEND_ACK);
+}
+
+static void dc_i2c_write_buf(struct dc_i2c *i2c)
+{
+	dc_i2c_write_byte(i2c, i2c->msg->buf[i2c->msgbuf_ptr++]);
+}
+
+static void dc_i2c_next_read(struct dc_i2c *i2c)
+{
+	bool last = (i2c->msgbuf_ptr + 1 == i2c->msg->len);
+
+	dc_i2c_cmd(i2c, last ? II_CMD_GET_NOACK : II_CMD_GET_ACK);
+}
+
+static void dc_i2c_stop(struct dc_i2c *i2c)
+{
+	i2c->state = STATE_STOP;
+	if (i2c->last)
+		dc_i2c_cmd(i2c, II_CMD_STOP);
+	else
+		complete(&i2c->done);
+}
+
+static u8 dc_i2c_read_byte(struct dc_i2c *i2c)
+{
+	return readb_relaxed(i2c->regs + II_DATA);
+}
+
+static void dc_i2c_read_buf(struct dc_i2c *i2c)
+{
+	i2c->msg->buf[i2c->msgbuf_ptr++] = dc_i2c_read_byte(i2c);
+	dc_i2c_next_read(i2c);
+}
+
+static void dc_i2c_set_irq(struct dc_i2c *i2c, int enable)
+{
+	if (enable)
+		writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR);
+	writeb_relaxed(!!enable, i2c->regs + II_INTENABLE);
+}
+
+static int dc_i2c_cmd_status(struct dc_i2c *i2c)
+{
+	u8 cmd = readb_relaxed(i2c->regs + II_COMMAND);
+
+	return II_COMMAND_COMPLETION_STATUS(cmd);
+}
+
+static void dc_i2c_start_msg(struct dc_i2c *i2c, int first)
+{
+	struct i2c_msg *msg = i2c->msg;
+
+	if (!(msg->flags & I2C_M_NOSTART)) {
+		i2c->state = STATE_START;
+		dc_i2c_cmd(i2c, first ? II_CMD_START : II_CMD_RESTART);
+	} else if (msg->flags & I2C_M_RD) {
+		i2c->state = STATE_READ;
+		dc_i2c_next_read(i2c);
+	} else {
+		i2c->state = STATE_WRITE;
+		dc_i2c_write_buf(i2c);
+	}
+}
+
+static irqreturn_t dc_i2c_irq(int irq, void *dev_id)
+{
+	struct dc_i2c *i2c = dev_id;
+	int cmd_status = dc_i2c_cmd_status(i2c);
+	unsigned long flags;
+	u8 addr_cmd;
+
+	writeb_relaxed(1, i2c->regs + II_INTFLAG_CLEAR);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	if (cmd_status == II_CMD_STATUS_ACK_BAD
+	    || cmd_status == II_CMD_STATUS_ABORT) {
+		i2c->error = -EIO;
+		complete(&i2c->done);
+		goto out;
+	}
+
+	switch (i2c->state) {
+	case STATE_START:
+		addr_cmd = dc_i2c_addr_cmd(i2c->msg);
+		dc_i2c_write_byte(i2c, addr_cmd);
+		i2c->state = STATE_ADDR;
+		break;
+	case STATE_ADDR:
+		if (i2c->msg->flags & I2C_M_RD) {
+			dc_i2c_next_read(i2c);
+			i2c->state = STATE_READ;
+			break;
+		}
+		i2c->state = STATE_WRITE;
+		/* fall through */
+	case STATE_WRITE:
+		if (i2c->msgbuf_ptr < i2c->msg->len)
+			dc_i2c_write_buf(i2c);
+		else
+			dc_i2c_stop(i2c);
+		break;
+	case STATE_READ:
+		if (i2c->msgbuf_ptr < i2c->msg->len)
+			dc_i2c_read_buf(i2c);
+		else
+			dc_i2c_stop(i2c);
+		break;
+	case STATE_STOP:
+		i2c->state = STATE_IDLE;
+		complete(&i2c->done);
+		break;
+	}
+
+out:
+	spin_unlock_irqrestore(&i2c->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int dc_i2c_xfer_msg(struct dc_i2c *i2c, struct i2c_msg *msg, int first,
+			   int last)
+{
+	unsigned long timeout = msecs_to_jiffies(TIMEOUT_MS);
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	i2c->msg = msg;
+	i2c->msgbuf_ptr = 0;
+	i2c->last = last;
+	i2c->error = 0;
+
+	reinit_completion(&i2c->done);
+	dc_i2c_set_irq(i2c, 1);
+	dc_i2c_start_msg(i2c, first);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->done, timeout);
+	dc_i2c_set_irq(i2c, 0);
+	if (timeout == 0) {
+		i2c->state = STATE_IDLE;
+		return -ETIMEDOUT;
+	}
+
+	if (i2c->error)
+		return i2c->error;
+
+	return 0;
+}
+
+static int dc_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct dc_i2c *i2c = adap->algo_data;
+	int i, ret;
+
+	for (i = 0; i < num; i++) {
+		ret = dc_i2c_xfer_msg(i2c, &msgs[i], i == 0, i == num - 1);
+		if (ret)
+			return ret;
+	}
+
+	return num;
+}
+
+static int dc_i2c_init_hw(struct dc_i2c *i2c)
+{
+	unsigned long clk_rate = clk_get_rate(i2c->clk);
+	unsigned int clocktime;
+
+	writeb_relaxed(II_CONTROL_LOCAL_RESET, i2c->regs + II_CONTROL);
+	udelay(100);
+	writeb_relaxed(0, i2c->regs + II_CONTROL);
+	udelay(100);
+
+	clocktime = DIV_ROUND_UP(clk_rate, 64 * i2c->frequency);
+	if (clocktime < 1 || clocktime > 0xff) {
+		dev_err(i2c->dev, "can't set bus speed of %u Hz\n",
+			i2c->frequency);
+		return -EINVAL;
+	}
+	writeb_relaxed(clocktime - 1, i2c->regs + II_CLOCKTIME);
+
+	return 0;
+}
+
+static u32 dc_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm dc_i2c_algorithm = {
+	.master_xfer	= dc_i2c_xfer,
+	.functionality	= dc_i2c_func,
+};
+
+static int dc_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct dc_i2c *i2c;
+	struct resource *r;
+	int ret = 0, irq;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct dc_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &i2c->frequency))
+		i2c->frequency = DEFAULT_FREQ;
+
+	i2c->dev = &pdev->dev;
+	platform_set_drvdata(pdev, i2c);
+
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->done);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return PTR_ERR(i2c->clk);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, dc_i2c_irq, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret < 0)
+		return ret;
+
+	strlcpy(i2c->adap.name, "Conexant Digicolor I2C adapter",
+		sizeof(i2c->adap.name));
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &dc_i2c_algorithm;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+
+	ret = dc_i2c_init_hw(i2c);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dc_i2c_remove(struct platform_device *pdev)
+{
+	struct dc_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static const struct of_device_id dc_i2c_match[] = {
+	{ .compatible = "cnxt,cx92755-i2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, dc_i2c_match);
+
+static struct platform_driver dc_i2c_driver = {
+	.probe   = dc_i2c_probe,
+	.remove  = dc_i2c_remove,
+	.driver  = {
+		.name  = "digicolor-i2c",
+		.of_match_table = dc_i2c_match,
+	},
+};
+module_platform_driver(dc_i2c_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Conexant Digicolor I2C master driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-diolan-u2c.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-diolan-u2c.c
new file mode 100644
index 0000000..f718ee4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -0,0 +1,526 @@
+/*
+ * Driver for the Diolan u2c-12 USB-I2C adapter
+ *
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * Derived from:
+ *  i2c-tiny-usb.c
+ *  Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#define DRIVER_NAME		"i2c-diolan-u2c"
+
+#define USB_VENDOR_ID_DIOLAN		0x0abf
+#define USB_DEVICE_ID_DIOLAN_U2C	0x3370
+
+
+/* commands via USB, must match command ids in the firmware */
+#define CMD_I2C_READ		0x01
+#define CMD_I2C_WRITE		0x02
+#define CMD_I2C_SCAN		0x03	/* Returns list of detected devices */
+#define CMD_I2C_RELEASE_SDA	0x04
+#define CMD_I2C_RELEASE_SCL	0x05
+#define CMD_I2C_DROP_SDA	0x06
+#define CMD_I2C_DROP_SCL	0x07
+#define CMD_I2C_READ_SDA	0x08
+#define CMD_I2C_READ_SCL	0x09
+#define CMD_GET_FW_VERSION	0x0a
+#define CMD_GET_SERIAL		0x0b
+#define CMD_I2C_START		0x0c
+#define CMD_I2C_STOP		0x0d
+#define CMD_I2C_REPEATED_START	0x0e
+#define CMD_I2C_PUT_BYTE	0x0f
+#define CMD_I2C_GET_BYTE	0x10
+#define CMD_I2C_PUT_ACK		0x11
+#define CMD_I2C_GET_ACK		0x12
+#define CMD_I2C_PUT_BYTE_ACK	0x13
+#define CMD_I2C_GET_BYTE_ACK	0x14
+#define CMD_I2C_SET_SPEED	0x1b
+#define CMD_I2C_GET_SPEED	0x1c
+#define CMD_I2C_SET_CLK_SYNC	0x24
+#define CMD_I2C_GET_CLK_SYNC	0x25
+#define CMD_I2C_SET_CLK_SYNC_TO	0x26
+#define CMD_I2C_GET_CLK_SYNC_TO	0x27
+
+#define RESP_OK			0x00
+#define RESP_FAILED		0x01
+#define RESP_BAD_MEMADDR	0x04
+#define RESP_DATA_ERR		0x05
+#define RESP_NOT_IMPLEMENTED	0x06
+#define RESP_NACK		0x07
+#define RESP_TIMEOUT		0x09
+
+#define U2C_I2C_SPEED_FAST	0	/* 400 kHz */
+#define U2C_I2C_SPEED_STD	1	/* 100 kHz */
+#define U2C_I2C_SPEED_2KHZ	242	/* 2 kHz, minimum speed */
+#define U2C_I2C_SPEED(f)	((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
+
+#define U2C_I2C_FREQ_FAST	400000
+#define U2C_I2C_FREQ_STD	100000
+#define U2C_I2C_FREQ(s)		(1000000 / (2 * (s - 1) + 10))
+
+#define DIOLAN_USB_TIMEOUT	100	/* in ms */
+#define DIOLAN_SYNC_TIMEOUT	20	/* in ms */
+
+#define DIOLAN_OUTBUF_LEN	128
+#define DIOLAN_FLUSH_LEN	(DIOLAN_OUTBUF_LEN - 4)
+#define DIOLAN_INBUF_LEN	256	/* Maximum supported receive length */
+
+/* Structure to hold all of our device specific stuff */
+struct i2c_diolan_u2c {
+	u8 obuffer[DIOLAN_OUTBUF_LEN];	/* output buffer */
+	u8 ibuffer[DIOLAN_INBUF_LEN];	/* input buffer */
+	int ep_in, ep_out;              /* Endpoints    */
+	struct usb_device *usb_dev;	/* the usb device for this device */
+	struct usb_interface *interface;/* the interface for this device */
+	struct i2c_adapter adapter;	/* i2c related things */
+	int olen;			/* Output buffer length */
+	int ocount;			/* Number of enqueued messages */
+};
+
+static uint frequency = U2C_I2C_FREQ_STD;	/* I2C clock frequency in Hz */
+
+module_param(frequency, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
+
+/* usb layer */
+
+/* Send command to device, and get response. */
+static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
+{
+	int ret = 0;
+	int actual;
+	int i;
+
+	if (!dev->olen || !dev->ocount)
+		return -EINVAL;
+
+	ret = usb_bulk_msg(dev->usb_dev,
+			   usb_sndbulkpipe(dev->usb_dev, dev->ep_out),
+			   dev->obuffer, dev->olen, &actual,
+			   DIOLAN_USB_TIMEOUT);
+	if (!ret) {
+		for (i = 0; i < dev->ocount; i++) {
+			int tmpret;
+
+			tmpret = usb_bulk_msg(dev->usb_dev,
+					      usb_rcvbulkpipe(dev->usb_dev,
+							      dev->ep_in),
+					      dev->ibuffer,
+					      sizeof(dev->ibuffer), &actual,
+					      DIOLAN_USB_TIMEOUT);
+			/*
+			 * Stop command processing if a previous command
+			 * returned an error.
+			 * Note that we still need to retrieve all messages.
+			 */
+			if (ret < 0)
+				continue;
+			ret = tmpret;
+			if (ret == 0 && actual > 0) {
+				switch (dev->ibuffer[actual - 1]) {
+				case RESP_NACK:
+					/*
+					 * Return ENXIO if NACK was received as
+					 * response to the address phase,
+					 * EIO otherwise
+					 */
+					ret = i == 1 ? -ENXIO : -EIO;
+					break;
+				case RESP_TIMEOUT:
+					ret = -ETIMEDOUT;
+					break;
+				case RESP_OK:
+					/* strip off return code */
+					ret = actual - 1;
+					break;
+				default:
+					ret = -EIO;
+					break;
+				}
+			}
+		}
+	}
+	dev->olen = 0;
+	dev->ocount = 0;
+	return ret;
+}
+
+static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush)
+{
+	if (flush || dev->olen >= DIOLAN_FLUSH_LEN)
+		return diolan_usb_transfer(dev);
+	return 0;
+}
+
+/* Send command (no data) */
+static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/* Send command with one byte of data */
+static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data,
+			       bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->obuffer[dev->olen++] = data;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/* Send command with two bytes of data */
+static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1,
+				u8 d2, bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->obuffer[dev->olen++] = d1;
+	dev->obuffer[dev->olen++] = d2;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/*
+ * Flush input queue.
+ * If we don't do this at startup and the controller has queued up
+ * messages which were not retrieved, it will stop responding
+ * at some point.
+ */
+static void diolan_flush_input(struct i2c_diolan_u2c *dev)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		int actual = 0;
+		int ret;
+
+		ret = usb_bulk_msg(dev->usb_dev,
+				   usb_rcvbulkpipe(dev->usb_dev, dev->ep_in),
+				   dev->ibuffer, sizeof(dev->ibuffer), &actual,
+				   DIOLAN_USB_TIMEOUT);
+		if (ret < 0 || actual == 0)
+			break;
+	}
+	if (i == 10)
+		dev_err(&dev->interface->dev, "Failed to flush input buffer\n");
+}
+
+static int diolan_i2c_start(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_START, false);
+}
+
+static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false);
+}
+
+static int diolan_i2c_stop(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_STOP, true);
+}
+
+static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack,
+				   u8 *byte)
+{
+	int ret;
+
+	ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true);
+	if (ret > 0)
+		*byte = dev->ibuffer[0];
+	else if (ret == 0)
+		ret = -EIO;
+
+	return ret;
+}
+
+static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false);
+}
+
+static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true);
+}
+
+/* Enable or disable clock synchronization (stretching) */
+static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true);
+}
+
+/* Set clock synchronization timeout in ms */
+static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms)
+{
+	int to_val = ms * 10;
+
+	return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO,
+				    to_val & 0xff, (to_val >> 8) & 0xff, true);
+}
+
+static void diolan_fw_version(struct i2c_diolan_u2c *dev)
+{
+	int ret;
+
+	ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true);
+	if (ret >= 2)
+		dev_info(&dev->interface->dev,
+			 "Diolan U2C firmware version %u.%u\n",
+			 (unsigned int)dev->ibuffer[0],
+			 (unsigned int)dev->ibuffer[1]);
+}
+
+static void diolan_get_serial(struct i2c_diolan_u2c *dev)
+{
+	int ret;
+	u32 serial;
+
+	ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true);
+	if (ret >= 4) {
+		serial = le32_to_cpu(*(u32 *)dev->ibuffer);
+		dev_info(&dev->interface->dev,
+			 "Diolan U2C serial number %u\n", serial);
+	}
+}
+
+static int diolan_init(struct i2c_diolan_u2c *dev)
+{
+	int speed, ret;
+
+	if (frequency >= 200000) {
+		speed = U2C_I2C_SPEED_FAST;
+		frequency = U2C_I2C_FREQ_FAST;
+	} else if (frequency >= 100000 || frequency == 0) {
+		speed = U2C_I2C_SPEED_STD;
+		frequency = U2C_I2C_FREQ_STD;
+	} else {
+		speed = U2C_I2C_SPEED(frequency);
+		if (speed > U2C_I2C_SPEED_2KHZ)
+			speed = U2C_I2C_SPEED_2KHZ;
+		frequency = U2C_I2C_FREQ(speed);
+	}
+
+	dev_info(&dev->interface->dev,
+		 "Diolan U2C at USB bus %03d address %03d speed %d Hz\n",
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency);
+
+	diolan_flush_input(dev);
+	diolan_fw_version(dev);
+	diolan_get_serial(dev);
+
+	/* Set I2C speed */
+	ret = diolan_set_speed(dev, speed);
+	if (ret < 0)
+		return ret;
+
+	/* Configure I2C clock synchronization */
+	ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST);
+	if (ret < 0)
+		return ret;
+
+	if (speed != U2C_I2C_SPEED_FAST)
+		ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT);
+
+	return ret;
+}
+
+/* i2c layer */
+
+static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+			   int num)
+{
+	struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int i, j;
+	int ret, sret;
+
+	ret = diolan_i2c_start(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		if (i) {
+			ret = diolan_i2c_repeated_start(dev);
+			if (ret < 0)
+				goto abort;
+		}
+		if (pmsg->flags & I2C_M_RD) {
+			ret =
+			    diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
+			if (ret < 0)
+				goto abort;
+			for (j = 0; j < pmsg->len; j++) {
+				u8 byte;
+				bool ack = j < pmsg->len - 1;
+
+				/*
+				 * Don't send NACK if this is the first byte
+				 * of a SMBUS_BLOCK message.
+				 */
+				if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN))
+					ack = true;
+
+				ret = diolan_i2c_get_byte_ack(dev, ack, &byte);
+				if (ret < 0)
+					goto abort;
+				/*
+				 * Adjust count if first received byte is length
+				 */
+				if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) {
+					if (byte == 0
+					    || byte > I2C_SMBUS_BLOCK_MAX) {
+						ret = -EPROTO;
+						goto abort;
+					}
+					pmsg->len += byte;
+				}
+				pmsg->buf[j] = byte;
+			}
+		} else {
+			ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
+			if (ret < 0)
+				goto abort;
+			for (j = 0; j < pmsg->len; j++) {
+				ret = diolan_i2c_put_byte_ack(dev,
+							      pmsg->buf[j]);
+				if (ret < 0)
+					goto abort;
+			}
+		}
+	}
+	ret = num;
+abort:
+	sret = diolan_i2c_stop(dev);
+	if (sret < 0 && ret >= 0)
+		ret = sret;
+	return ret;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 diolan_usb_func(struct i2c_adapter *a)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm diolan_usb_algorithm = {
+	.master_xfer = diolan_usb_xfer,
+	.functionality = diolan_usb_func,
+};
+
+/* device layer */
+
+static const struct usb_device_id diolan_u2c_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, diolan_u2c_table);
+
+static void diolan_u2c_free(struct i2c_diolan_u2c *dev)
+{
+	usb_put_dev(dev->usb_dev);
+	kfree(dev);
+}
+
+static int diolan_u2c_probe(struct usb_interface *interface,
+			    const struct usb_device_id *id)
+{
+	struct usb_host_interface *hostif = interface->cur_altsetting;
+	struct i2c_diolan_u2c *dev;
+	int ret;
+
+	if (hostif->desc.bInterfaceNumber != 0
+	    || hostif->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+	dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
+
+	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = interface;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* setup i2c adapter description */
+	dev->adapter.owner = THIS_MODULE;
+	dev->adapter.class = I2C_CLASS_HWMON;
+	dev->adapter.algo = &diolan_usb_algorithm;
+	i2c_set_adapdata(&dev->adapter, dev);
+	snprintf(dev->adapter.name, sizeof(dev->adapter.name),
+		 DRIVER_NAME " at bus %03d device %03d",
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+	dev->adapter.dev.parent = &dev->interface->dev;
+
+	/* initialize diolan i2c interface */
+	ret = diolan_init(dev);
+	if (ret < 0) {
+		dev_err(&interface->dev, "failed to initialize adapter\n");
+		goto error_free;
+	}
+
+	/* and finally attach to i2c layer */
+	ret = i2c_add_adapter(&dev->adapter);
+	if (ret < 0)
+		goto error_free;
+
+	dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n");
+
+	return 0;
+
+error_free:
+	usb_set_intfdata(interface, NULL);
+	diolan_u2c_free(dev);
+error:
+	return ret;
+}
+
+static void diolan_u2c_disconnect(struct usb_interface *interface)
+{
+	struct i2c_diolan_u2c *dev = usb_get_intfdata(interface);
+
+	i2c_del_adapter(&dev->adapter);
+	usb_set_intfdata(interface, NULL);
+	diolan_u2c_free(dev);
+
+	dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver diolan_u2c_driver = {
+	.name = DRIVER_NAME,
+	.probe = diolan_u2c_probe,
+	.disconnect = diolan_u2c_disconnect,
+	.id_table = diolan_u2c_table,
+};
+
+module_usb_driver(diolan_u2c_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION(DRIVER_NAME " driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-dln2.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-dln2.c
new file mode 100644
index 0000000..69075a3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-dln2.c
@@ -0,0 +1,263 @@
+/*
+ * Driver for the Diolan DLN-2 USB-I2C adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ *  i2c-diolan-u2c.c
+ *  Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+#include <linux/acpi.h>
+
+#define DLN2_I2C_MODULE_ID		0x03
+#define DLN2_I2C_CMD(cmd)		DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
+
+/* I2C commands */
+#define DLN2_I2C_GET_PORT_COUNT		DLN2_I2C_CMD(0x00)
+#define DLN2_I2C_ENABLE			DLN2_I2C_CMD(0x01)
+#define DLN2_I2C_DISABLE		DLN2_I2C_CMD(0x02)
+#define DLN2_I2C_IS_ENABLED		DLN2_I2C_CMD(0x03)
+#define DLN2_I2C_WRITE			DLN2_I2C_CMD(0x06)
+#define DLN2_I2C_READ			DLN2_I2C_CMD(0x07)
+#define DLN2_I2C_SCAN_DEVICES		DLN2_I2C_CMD(0x08)
+#define DLN2_I2C_PULLUP_ENABLE		DLN2_I2C_CMD(0x09)
+#define DLN2_I2C_PULLUP_DISABLE		DLN2_I2C_CMD(0x0A)
+#define DLN2_I2C_PULLUP_IS_ENABLED	DLN2_I2C_CMD(0x0B)
+#define DLN2_I2C_TRANSFER		DLN2_I2C_CMD(0x0C)
+#define DLN2_I2C_SET_MAX_REPLY_COUNT	DLN2_I2C_CMD(0x0D)
+#define DLN2_I2C_GET_MAX_REPLY_COUNT	DLN2_I2C_CMD(0x0E)
+
+#define DLN2_I2C_MAX_XFER_SIZE		256
+#define DLN2_I2C_BUF_SIZE		(DLN2_I2C_MAX_XFER_SIZE + 16)
+
+struct dln2_i2c {
+	struct platform_device *pdev;
+	struct i2c_adapter adapter;
+	u8 port;
+	/*
+	 * Buffer to hold the packet for read or write transfers. One is enough
+	 * since we can't have multiple transfers in parallel on the i2c bus.
+	 */
+	void *buf;
+};
+
+static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
+{
+	u16 cmd;
+	struct {
+		u8 port;
+	} tx;
+
+	tx.port = dln2->port;
+
+	if (enable)
+		cmd = DLN2_I2C_ENABLE;
+	else
+		cmd = DLN2_I2C_DISABLE;
+
+	return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
+}
+
+static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
+			  u8 *data, u16 data_len)
+{
+	int ret;
+	struct {
+		u8 port;
+		u8 addr;
+		u8 mem_addr_len;
+		__le32 mem_addr;
+		__le16 buf_len;
+		u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+	} __packed *tx = dln2->buf;
+	unsigned len;
+
+	BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE);
+
+	tx->port = dln2->port;
+	tx->addr = addr;
+	tx->mem_addr_len = 0;
+	tx->mem_addr = 0;
+	tx->buf_len = cpu_to_le16(data_len);
+	memcpy(tx->buf, data, data_len);
+
+	len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
+	ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len);
+	if (ret < 0)
+		return ret;
+
+	return data_len;
+}
+
+static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
+			 u16 data_len)
+{
+	int ret;
+	struct {
+		u8 port;
+		u8 addr;
+		u8 mem_addr_len;
+		__le32 mem_addr;
+		__le16 buf_len;
+	} __packed tx;
+	struct {
+		__le16 buf_len;
+		u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+	} __packed *rx = dln2->buf;
+	unsigned rx_len = sizeof(*rx);
+
+	BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE);
+
+	tx.port = dln2->port;
+	tx.addr = addr;
+	tx.mem_addr_len = 0;
+	tx.mem_addr = 0;
+	tx.buf_len = cpu_to_le16(data_len);
+
+	ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
+			    rx, &rx_len);
+	if (ret < 0)
+		return ret;
+	if (rx_len < sizeof(rx->buf_len) + data_len)
+		return -EPROTO;
+	if (le16_to_cpu(rx->buf_len) != data_len)
+		return -EPROTO;
+
+	memcpy(data, rx->buf, data_len);
+
+	return data_len;
+}
+
+static int dln2_i2c_xfer(struct i2c_adapter *adapter,
+			 struct i2c_msg *msgs, int num)
+{
+	struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		int ret;
+
+		pmsg = &msgs[i];
+
+		if (pmsg->flags & I2C_M_RD) {
+			ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
+					    pmsg->len);
+			if (ret < 0)
+				return ret;
+
+			pmsg->len = ret;
+		} else {
+			ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
+					     pmsg->len);
+			if (ret != pmsg->len)
+				return -EPROTO;
+		}
+	}
+
+	return num;
+}
+
+static u32 dln2_i2c_func(struct i2c_adapter *a)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
+	.master_xfer = dln2_i2c_xfer,
+	.functionality = dln2_i2c_func,
+};
+
+static const struct i2c_adapter_quirks dln2_i2c_quirks = {
+	.max_read_len = DLN2_I2C_MAX_XFER_SIZE,
+	.max_write_len = DLN2_I2C_MAX_XFER_SIZE,
+};
+
+static int dln2_i2c_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct dln2_i2c *dln2;
+	struct device *dev = &pdev->dev;
+	struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
+	if (!dln2)
+		return -ENOMEM;
+
+	dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
+	if (!dln2->buf)
+		return -ENOMEM;
+
+	dln2->pdev = pdev;
+	dln2->port = pdata->port;
+
+	/* setup i2c adapter description */
+	dln2->adapter.owner = THIS_MODULE;
+	dln2->adapter.class = I2C_CLASS_HWMON;
+	dln2->adapter.algo = &dln2_i2c_usb_algorithm;
+	dln2->adapter.quirks = &dln2_i2c_quirks;
+	dln2->adapter.dev.parent = dev;
+	ACPI_COMPANION_SET(&dln2->adapter.dev, ACPI_COMPANION(&pdev->dev));
+	dln2->adapter.dev.of_node = dev->of_node;
+	i2c_set_adapdata(&dln2->adapter, dln2);
+	snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
+		 "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
+
+	platform_set_drvdata(pdev, dln2);
+
+	/* initialize the i2c interface */
+	ret = dln2_i2c_enable(dln2, true);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize adapter: %d\n", ret);
+		return ret;
+	}
+
+	/* and finally attach to i2c layer */
+	ret = i2c_add_adapter(&dln2->adapter);
+	if (ret < 0)
+		goto out_disable;
+
+	return 0;
+
+out_disable:
+	dln2_i2c_enable(dln2, false);
+
+	return ret;
+}
+
+static int dln2_i2c_remove(struct platform_device *pdev)
+{
+	struct dln2_i2c *dln2 = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dln2->adapter);
+	dln2_i2c_enable(dln2, false);
+
+	return 0;
+}
+
+static struct platform_driver dln2_i2c_driver = {
+	.driver.name	= "dln2-i2c",
+	.probe		= dln2_i2c_probe,
+	.remove		= dln2_i2c_remove,
+};
+
+module_platform_driver(dln2_i2c_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-efm32.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-efm32.c
new file mode 100644
index 0000000..aa336ba
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-efm32.c
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "efm32-i2c"
+
+#define MASK_VAL(mask, val)		((val << __ffs(mask)) & mask)
+
+#define REG_CTRL		0x00
+#define REG_CTRL_EN			0x00001
+#define REG_CTRL_SLAVE			0x00002
+#define REG_CTRL_AUTOACK		0x00004
+#define REG_CTRL_AUTOSE			0x00008
+#define REG_CTRL_AUTOSN			0x00010
+#define REG_CTRL_ARBDIS			0x00020
+#define REG_CTRL_GCAMEN			0x00040
+#define REG_CTRL_CLHR__MASK		0x00300
+#define REG_CTRL_BITO__MASK		0x03000
+#define REG_CTRL_BITO_OFF		0x00000
+#define REG_CTRL_BITO_40PCC		0x01000
+#define REG_CTRL_BITO_80PCC		0x02000
+#define REG_CTRL_BITO_160PCC		0x03000
+#define REG_CTRL_GIBITO			0x08000
+#define REG_CTRL_CLTO__MASK		0x70000
+#define REG_CTRL_CLTO_OFF		0x00000
+
+#define REG_CMD			0x04
+#define REG_CMD_START			0x00001
+#define REG_CMD_STOP			0x00002
+#define REG_CMD_ACK			0x00004
+#define REG_CMD_NACK			0x00008
+#define REG_CMD_CONT			0x00010
+#define REG_CMD_ABORT			0x00020
+#define REG_CMD_CLEARTX			0x00040
+#define REG_CMD_CLEARPC			0x00080
+
+#define REG_STATE		0x08
+#define REG_STATE_BUSY			0x00001
+#define REG_STATE_MASTER		0x00002
+#define REG_STATE_TRANSMITTER		0x00004
+#define REG_STATE_NACKED		0x00008
+#define REG_STATE_BUSHOLD		0x00010
+#define REG_STATE_STATE__MASK		0x000e0
+#define REG_STATE_STATE_IDLE		0x00000
+#define REG_STATE_STATE_WAIT		0x00020
+#define REG_STATE_STATE_START		0x00040
+#define REG_STATE_STATE_ADDR		0x00060
+#define REG_STATE_STATE_ADDRACK		0x00080
+#define REG_STATE_STATE_DATA		0x000a0
+#define REG_STATE_STATE_DATAACK		0x000c0
+
+#define REG_STATUS		0x0c
+#define REG_STATUS_PSTART		0x00001
+#define REG_STATUS_PSTOP		0x00002
+#define REG_STATUS_PACK			0x00004
+#define REG_STATUS_PNACK		0x00008
+#define REG_STATUS_PCONT		0x00010
+#define REG_STATUS_PABORT		0x00020
+#define REG_STATUS_TXC			0x00040
+#define REG_STATUS_TXBL			0x00080
+#define REG_STATUS_RXDATAV		0x00100
+
+#define REG_CLKDIV		0x10
+#define REG_CLKDIV_DIV__MASK		0x001ff
+#define REG_CLKDIV_DIV(div)		MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
+
+#define REG_SADDR		0x14
+#define REG_SADDRMASK		0x18
+#define REG_RXDATA		0x1c
+#define REG_RXDATAP		0x20
+#define REG_TXDATA		0x24
+#define REG_IF			0x28
+#define REG_IF_START			0x00001
+#define REG_IF_RSTART			0x00002
+#define REG_IF_ADDR			0x00004
+#define REG_IF_TXC			0x00008
+#define REG_IF_TXBL			0x00010
+#define REG_IF_RXDATAV			0x00020
+#define REG_IF_ACK			0x00040
+#define REG_IF_NACK			0x00080
+#define REG_IF_MSTOP			0x00100
+#define REG_IF_ARBLOST			0x00200
+#define REG_IF_BUSERR			0x00400
+#define REG_IF_BUSHOLD			0x00800
+#define REG_IF_TXOF			0x01000
+#define REG_IF_RXUF			0x02000
+#define REG_IF_BITO			0x04000
+#define REG_IF_CLTO			0x08000
+#define REG_IF_SSTOP			0x10000
+
+#define REG_IFS			0x2c
+#define REG_IFC			0x30
+#define REG_IFC__MASK			0x1ffcf
+
+#define REG_IEN			0x34
+
+#define REG_ROUTE		0x38
+#define REG_ROUTE_SDAPEN		0x00001
+#define REG_ROUTE_SCLPEN		0x00002
+#define REG_ROUTE_LOCATION__MASK	0x00700
+#define REG_ROUTE_LOCATION(n)		MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
+
+struct efm32_i2c_ddata {
+	struct i2c_adapter adapter;
+
+	struct clk *clk;
+	void __iomem *base;
+	unsigned int irq;
+	u8 location;
+	unsigned long frequency;
+
+	/* transfer data */
+	struct completion done;
+	struct i2c_msg *msgs;
+	size_t num_msgs;
+	size_t current_word, current_msg;
+	int retval;
+};
+
+static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
+{
+	return readl(ddata->base + offset);
+}
+
+static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
+		unsigned offset, u32 value)
+{
+	writel(value, ddata->base + offset);
+}
+
+static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
+	efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
+			(cur_msg->flags & I2C_M_RD ? 1 : 0));
+}
+
+static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	if (ddata->current_word >= cur_msg->len) {
+		/* cur_msg completely transferred */
+		ddata->current_word = 0;
+		ddata->current_msg += 1;
+
+		if (ddata->current_msg >= ddata->num_msgs) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_msg(ddata);
+		}
+	} else {
+		efm32_i2c_write32(ddata, REG_TXDATA,
+				cur_msg->buf[ddata->current_word++]);
+	}
+}
+
+static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
+	ddata->current_word += 1;
+	if (ddata->current_word >= cur_msg->len) {
+		/* cur_msg completely transferred */
+		ddata->current_word = 0;
+		ddata->current_msg += 1;
+
+		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
+
+		if (ddata->current_msg >= ddata->num_msgs) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_msg(ddata);
+		}
+	} else {
+		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
+	}
+}
+
+static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
+{
+	struct efm32_i2c_ddata *ddata = dev_id;
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+	u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
+	u32 state = efm32_i2c_read32(ddata, REG_STATE);
+
+	efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
+
+	switch (state & REG_STATE_STATE__MASK) {
+	case REG_STATE_STATE_IDLE:
+		/* arbitration lost? */
+		ddata->retval = -EAGAIN;
+		complete(&ddata->done);
+		break;
+	case REG_STATE_STATE_WAIT:
+		/*
+		 * huh, this shouldn't happen.
+		 * Reset hardware state and get out
+		 */
+		ddata->retval = -EIO;
+		efm32_i2c_write32(ddata, REG_CMD,
+				REG_CMD_STOP | REG_CMD_ABORT |
+				REG_CMD_CLEARTX | REG_CMD_CLEARPC);
+		complete(&ddata->done);
+		break;
+	case REG_STATE_STATE_START:
+		/* "caller" is expected to send an address */
+		break;
+	case REG_STATE_STATE_ADDR:
+		/* wait for Ack or NAck of slave */
+		break;
+	case REG_STATE_STATE_ADDRACK:
+		if (state & REG_STATE_NACKED) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			ddata->retval = -ENXIO;
+			complete(&ddata->done);
+		} else if (cur_msg->flags & I2C_M_RD) {
+			/* wait for slave to send first data byte */
+		} else {
+			efm32_i2c_send_next_byte(ddata);
+		}
+		break;
+	case REG_STATE_STATE_DATA:
+		if (cur_msg->flags & I2C_M_RD) {
+			efm32_i2c_recv_next_byte(ddata);
+		} else {
+			/* wait for Ack or Nack of slave */
+		}
+		break;
+	case REG_STATE_STATE_DATAACK:
+		if (state & REG_STATE_NACKED) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_byte(ddata);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
+		struct i2c_msg *msgs, int num)
+{
+	struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
+	int ret;
+
+	if (ddata->msgs)
+		return -EBUSY;
+
+	ddata->msgs = msgs;
+	ddata->num_msgs = num;
+	ddata->current_word = 0;
+	ddata->current_msg = 0;
+	ddata->retval = -EIO;
+
+	reinit_completion(&ddata->done);
+
+	dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
+			efm32_i2c_read32(ddata, REG_STATE),
+			efm32_i2c_read32(ddata, REG_STATUS));
+
+	efm32_i2c_send_next_msg(ddata);
+
+	wait_for_completion(&ddata->done);
+
+	if (ddata->current_msg >= ddata->num_msgs)
+		ret = ddata->num_msgs;
+	else
+		ret = ddata->retval;
+
+	return ret;
+}
+
+static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm efm32_i2c_algo = {
+	.master_xfer = efm32_i2c_master_xfer,
+	.functionality = efm32_i2c_functionality,
+};
+
+static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
+{
+	u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
+
+	return (reg & REG_ROUTE_LOCATION__MASK) >>
+		__ffs(REG_ROUTE_LOCATION__MASK);
+}
+
+static int efm32_i2c_probe(struct platform_device *pdev)
+{
+	struct efm32_i2c_ddata *ddata;
+	struct resource *res;
+	unsigned long rate;
+	struct device_node *np = pdev->dev.of_node;
+	u32 location, frequency;
+	int ret;
+	u32 clkdiv;
+
+	if (!np)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, ddata);
+
+	init_completion(&ddata->done);
+	strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
+	ddata->adapter.owner = THIS_MODULE;
+	ddata->adapter.algo = &efm32_i2c_algo;
+	ddata->adapter.dev.parent = &pdev->dev;
+	ddata->adapter.dev.of_node = pdev->dev.of_node;
+	i2c_set_adapdata(&ddata->adapter, ddata);
+
+	ddata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ddata->clk)) {
+		ret = PTR_ERR(ddata->clk);
+		dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to determine base address\n");
+		return -ENODEV;
+	}
+
+	if (resource_size(res) < 0x42) {
+		dev_err(&pdev->dev, "memory resource too small\n");
+		return -EINVAL;
+	}
+
+	ddata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
+		if (!ret)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	ddata->irq = ret;
+
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
+		return ret;
+	}
+
+
+	ret = of_property_read_u32(np, "energymicro,location", &location);
+
+	if (ret)
+		/* fall back to wrongly namespaced property */
+		ret = of_property_read_u32(np, "efm32,location", &location);
+
+	if (!ret) {
+		dev_dbg(&pdev->dev, "using location %u\n", location);
+	} else {
+		/* default to location configured in hardware */
+		location = efm32_i2c_get_configured_location(ddata);
+
+		dev_info(&pdev->dev, "fall back to location %u\n", location);
+	}
+
+	ddata->location = location;
+
+	ret = of_property_read_u32(np, "clock-frequency", &frequency);
+	if (!ret) {
+		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
+	} else {
+		frequency = 100000;
+		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
+	}
+	ddata->frequency = frequency;
+
+	rate = clk_get_rate(ddata->clk);
+	if (!rate) {
+		dev_err(&pdev->dev, "there is no input clock available\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+	clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
+	if (clkdiv >= 0x200) {
+		dev_err(&pdev->dev,
+				"input clock too fast (%lu) to divide down to bus freq (%lu)",
+				rate, ddata->frequency);
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
+			rate, ddata->frequency, (unsigned long)clkdiv);
+	efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
+
+	efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
+			REG_ROUTE_SCLPEN |
+			REG_ROUTE_LOCATION(ddata->location));
+
+	efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
+			REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
+
+	efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
+	efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
+			| REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
+
+	/* to make bus idle */
+	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
+
+	ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
+		goto err_disable_clk;
+	}
+
+	ret = i2c_add_adapter(&ddata->adapter);
+	if (ret) {
+		free_irq(ddata->irq, ddata);
+
+err_disable_clk:
+		clk_disable_unprepare(ddata->clk);
+	}
+	return ret;
+}
+
+static int efm32_i2c_remove(struct platform_device *pdev)
+{
+	struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&ddata->adapter);
+	free_irq(ddata->irq, ddata);
+	clk_disable_unprepare(ddata->clk);
+
+	return 0;
+}
+
+static const struct of_device_id efm32_i2c_dt_ids[] = {
+	{
+		.compatible = "energymicro,efm32-i2c",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
+
+static struct platform_driver efm32_i2c_driver = {
+	.probe = efm32_i2c_probe,
+	.remove = efm32_i2c_remove,
+
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = efm32_i2c_dt_ids,
+	},
+};
+module_platform_driver(efm32_i2c_driver);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("EFM32 i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-eg20t.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-eg20t.c
new file mode 100644
index 0000000..0b6567d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-eg20t.c
@@ -0,0 +1,941 @@
+/*
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/pci.h>
+#include <linux/mutex.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+
+#define PCH_EVENT_SET	0	/* I2C Interrupt Event Set Status */
+#define PCH_EVENT_NONE	1	/* I2C Interrupt Event Clear Status */
+#define PCH_MAX_CLK		100000	/* Maximum Clock speed in MHz */
+#define PCH_BUFFER_MODE_ENABLE	0x0002	/* flag for Buffer mode enable */
+#define PCH_EEPROM_SW_RST_MODE_ENABLE	0x0008	/* EEPROM SW RST enable flag */
+
+#define PCH_I2CSADR	0x00	/* I2C slave address register */
+#define PCH_I2CCTL	0x04	/* I2C control register */
+#define PCH_I2CSR	0x08	/* I2C status register */
+#define PCH_I2CDR	0x0C	/* I2C data register */
+#define PCH_I2CMON	0x10	/* I2C bus monitor register */
+#define PCH_I2CBC	0x14	/* I2C bus transfer rate setup counter */
+#define PCH_I2CMOD	0x18	/* I2C mode register */
+#define PCH_I2CBUFSLV	0x1C	/* I2C buffer mode slave address register */
+#define PCH_I2CBUFSUB	0x20	/* I2C buffer mode subaddress register */
+#define PCH_I2CBUFFOR	0x24	/* I2C buffer mode format register */
+#define PCH_I2CBUFCTL	0x28	/* I2C buffer mode control register */
+#define PCH_I2CBUFMSK	0x2C	/* I2C buffer mode interrupt mask register */
+#define PCH_I2CBUFSTA	0x30	/* I2C buffer mode status register */
+#define PCH_I2CBUFLEV	0x34	/* I2C buffer mode level register */
+#define PCH_I2CESRFOR	0x38	/* EEPROM software reset mode format register */
+#define PCH_I2CESRCTL	0x3C	/* EEPROM software reset mode ctrl register */
+#define PCH_I2CESRMSK	0x40	/* EEPROM software reset mode */
+#define PCH_I2CESRSTA	0x44	/* EEPROM software reset mode status register */
+#define PCH_I2CTMR	0x48	/* I2C timer register */
+#define PCH_I2CSRST	0xFC	/* I2C reset register */
+#define PCH_I2CNF	0xF8	/* I2C noise filter register */
+
+#define BUS_IDLE_TIMEOUT	20
+#define PCH_I2CCTL_I2CMEN	0x0080
+#define TEN_BIT_ADDR_DEFAULT	0xF000
+#define TEN_BIT_ADDR_MASK	0xF0
+#define PCH_START		0x0020
+#define PCH_RESTART		0x0004
+#define PCH_ESR_START		0x0001
+#define PCH_BUFF_START		0x1
+#define PCH_REPSTART		0x0004
+#define PCH_ACK			0x0008
+#define PCH_GETACK		0x0001
+#define CLR_REG			0x0
+#define I2C_RD			0x1
+#define I2CMCF_BIT		0x0080
+#define I2CMIF_BIT		0x0002
+#define I2CMAL_BIT		0x0010
+#define I2CBMFI_BIT		0x0001
+#define I2CBMAL_BIT		0x0002
+#define I2CBMNA_BIT		0x0004
+#define I2CBMTO_BIT		0x0008
+#define I2CBMIS_BIT		0x0010
+#define I2CESRFI_BIT		0X0001
+#define I2CESRTO_BIT		0x0002
+#define I2CESRFIIE_BIT		0x1
+#define I2CESRTOIE_BIT		0x2
+#define I2CBMDZ_BIT		0x0040
+#define I2CBMAG_BIT		0x0020
+#define I2CMBB_BIT		0x0020
+#define BUFFER_MODE_MASK	(I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
+				I2CBMTO_BIT | I2CBMIS_BIT)
+#define I2C_ADDR_MSK		0xFF
+#define I2C_MSB_2B_MSK		0x300
+#define FAST_MODE_CLK		400
+#define FAST_MODE_EN		0x0001
+#define SUB_ADDR_LEN_MAX	4
+#define BUF_LEN_MAX		32
+#define PCH_BUFFER_MODE		0x1
+#define EEPROM_SW_RST_MODE	0x0002
+#define NORMAL_INTR_ENBL	0x0300
+#define EEPROM_RST_INTR_ENBL	(I2CESRFIIE_BIT | I2CESRTOIE_BIT)
+#define EEPROM_RST_INTR_DISBL	0x0
+#define BUFFER_MODE_INTR_ENBL	0x001F
+#define BUFFER_MODE_INTR_DISBL	0x0
+#define NORMAL_MODE		0x0
+#define BUFFER_MODE		0x1
+#define EEPROM_SR_MODE		0x2
+#define I2C_TX_MODE		0x0010
+#define PCH_BUF_TX		0xFFF7
+#define PCH_BUF_RD		0x0008
+#define I2C_ERROR_MASK	(I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
+			I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
+#define I2CMAL_EVENT		0x0001
+#define I2CMCF_EVENT		0x0002
+#define I2CBMFI_EVENT		0x0004
+#define I2CBMAL_EVENT		0x0008
+#define I2CBMNA_EVENT		0x0010
+#define I2CBMTO_EVENT		0x0020
+#define I2CBMIS_EVENT		0x0040
+#define I2CESRFI_EVENT		0x0080
+#define I2CESRTO_EVENT		0x0100
+#define PCI_DEVICE_ID_PCH_I2C	0x8817
+
+#define pch_dbg(adap, fmt, arg...)  \
+	dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
+
+#define pch_err(adap, fmt, arg...)  \
+	dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
+
+#define pch_pci_err(pdev, fmt, arg...)  \
+	dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
+
+#define pch_pci_dbg(pdev, fmt, arg...)  \
+	dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
+
+/*
+Set the number of I2C instance max
+Intel EG20T PCH :		1ch
+LAPIS Semiconductor ML7213 IOH :	2ch
+LAPIS Semiconductor ML7831 IOH :	1ch
+*/
+#define PCH_I2C_MAX_DEV			2
+
+/**
+ * struct i2c_algo_pch_data - for I2C driver functionalities
+ * @pch_adapter:		stores the reference to i2c_adapter structure
+ * @p_adapter_info:		stores the reference to adapter_info structure
+ * @pch_base_address:		specifies the remapped base address
+ * @pch_buff_mode_en:		specifies if buffer mode is enabled
+ * @pch_event_flag:		specifies occurrence of interrupt events
+ * @pch_i2c_xfer_in_progress:	specifies whether the transfer is completed
+ */
+struct i2c_algo_pch_data {
+	struct i2c_adapter pch_adapter;
+	struct adapter_info *p_adapter_info;
+	void __iomem *pch_base_address;
+	int pch_buff_mode_en;
+	u32 pch_event_flag;
+	bool pch_i2c_xfer_in_progress;
+};
+
+/**
+ * struct adapter_info - This structure holds the adapter information for the
+			 PCH i2c controller
+ * @pch_data:		stores a list of i2c_algo_pch_data
+ * @pch_i2c_suspended:	specifies whether the system is suspended or not
+ *			perhaps with more lines and words.
+ * @ch_num:		specifies the number of i2c instance
+ *
+ * pch_data has as many elements as maximum I2C channels
+ */
+struct adapter_info {
+	struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
+	bool pch_i2c_suspended;
+	int ch_num;
+};
+
+
+static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */
+static int pch_clk = 50000;	/* specifies I2C clock speed in KHz */
+static wait_queue_head_t pch_event;
+static DEFINE_MUTEX(pch_mutex);
+
+/* Definition for ML7213 by LAPIS Semiconductor */
+#define PCI_VENDOR_ID_ROHM		0x10DB
+#define PCI_DEVICE_ID_ML7213_I2C	0x802D
+#define PCI_DEVICE_ID_ML7223_I2C	0x8010
+#define PCI_DEVICE_ID_ML7831_I2C	0x8817
+
+static const struct pci_device_id pch_pcidev_id[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, pch_pcidev_id);
+
+static irqreturn_t pch_i2c_handler(int irq, void *pData);
+
+static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
+{
+	u32 val;
+	val = ioread32(addr + offset);
+	val |= bitmask;
+	iowrite32(val, addr + offset);
+}
+
+static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 bitmask)
+{
+	u32 val;
+	val = ioread32(addr + offset);
+	val &= (~bitmask);
+	iowrite32(val, addr + offset);
+}
+
+/**
+ * pch_i2c_init() - hardware initialization of I2C module
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_init(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	u32 pch_i2cbc;
+	u32 pch_i2ctmr;
+	u32 reg_value;
+
+	/* reset I2C controller */
+	iowrite32(0x01, p + PCH_I2CSRST);
+	msleep(20);
+	iowrite32(0x0, p + PCH_I2CSRST);
+
+	/* Initialize I2C registers */
+	iowrite32(0x21, p + PCH_I2CNF);
+
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
+
+	if (pch_i2c_speed != 400)
+		pch_i2c_speed = 100;
+
+	reg_value = PCH_I2CCTL_I2CMEN;
+	if (pch_i2c_speed == FAST_MODE_CLK) {
+		reg_value |= FAST_MODE_EN;
+		pch_dbg(adap, "Fast mode enabled\n");
+	}
+
+	if (pch_clk > PCH_MAX_CLK)
+		pch_clk = 62500;
+
+	pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / (pch_i2c_speed * 8);
+	/* Set transfer speed in I2CBC */
+	iowrite32(pch_i2cbc, p + PCH_I2CBC);
+
+	pch_i2ctmr = (pch_clk) / 8;
+	iowrite32(pch_i2ctmr, p + PCH_I2CTMR);
+
+	reg_value |= NORMAL_INTR_ENBL;	/* Enable interrupts in normal mode */
+	iowrite32(reg_value, p + PCH_I2CCTL);
+
+	pch_dbg(adap,
+		"I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
+		ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr);
+
+	init_waitqueue_head(&pch_event);
+}
+
+/**
+ * pch_i2c_wait_for_bus_idle() - check the status of bus.
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ * @timeout:	waiting time counter (ms).
+ */
+static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
+				     s32 timeout)
+{
+	void __iomem *p = adap->pch_base_address;
+	int schedule = 0;
+	unsigned long end = jiffies + msecs_to_jiffies(timeout);
+
+	while (ioread32(p + PCH_I2CSR) & I2CMBB_BIT) {
+		if (time_after(jiffies, end)) {
+			pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+			pch_err(adap, "%s: Timeout Error.return%d\n",
+					__func__, -ETIME);
+			pch_i2c_init(adap);
+
+			return -ETIME;
+		}
+
+		if (!schedule)
+			/* Retry after some usecs */
+			udelay(5);
+		else
+			/* Wait a bit more without consuming CPU */
+			usleep_range(20, 1000);
+
+		schedule = 1;
+	}
+
+	return 0;
+}
+
+/**
+ * pch_i2c_start() - Generate I2C start condition in normal mode.
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ *
+ * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
+ */
+static void pch_i2c_start(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
+}
+
+/**
+ * pch_i2c_stop() - generate stop condition in normal mode.
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	/* clear the start bit */
+	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
+}
+
+static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
+{
+	long ret;
+	void __iomem *p = adap->pch_base_address;
+
+	ret = wait_event_timeout(pch_event,
+			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
+	if (!ret) {
+		pch_err(adap, "%s:wait-event timeout\n", __func__);
+		adap->pch_event_flag = 0;
+		pch_i2c_stop(adap);
+		pch_i2c_init(adap);
+		return -ETIMEDOUT;
+	}
+
+	if (adap->pch_event_flag & I2C_ERROR_MASK) {
+		pch_err(adap, "Lost Arbitration\n");
+		adap->pch_event_flag = 0;
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+		pch_i2c_init(adap);
+		return -EAGAIN;
+	}
+
+	adap->pch_event_flag = 0;
+
+	if (ioread32(p + PCH_I2CSR) & PCH_GETACK) {
+		pch_dbg(adap, "Receive NACK for slave address setting\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+/**
+ * pch_i2c_repstart() - generate repeated start condition in normal mode
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_repstart(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART);
+}
+
+/**
+ * pch_i2c_writebytes() - write data to I2C bus in normal mode
+ * @i2c_adap:	Pointer to the struct i2c_adapter.
+ * @last:	specifies whether last message or not.
+ *		In the case of compound mode it will be 1 for last message,
+ *		otherwise 0.
+ * @first:	specifies whether first message or not.
+ *		1 for first message otherwise 0.
+ */
+static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
+			      struct i2c_msg *msgs, u32 last, u32 first)
+{
+	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
+	u8 *buf;
+	u32 length;
+	u32 addr;
+	u32 addr_2_msb;
+	u32 addr_8_lsb;
+	s32 wrcount;
+	s32 rtn;
+	void __iomem *p = adap->pch_base_address;
+
+	length = msgs->len;
+	buf = msgs->buf;
+	addr = msgs->addr;
+
+	/* enable master tx */
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
+
+	pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL),
+		length);
+
+	if (first) {
+		if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
+			return -ETIME;
+	}
+
+	if (msgs->flags & I2C_M_TEN) {
+		addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06;
+		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
+		if (first)
+			pch_i2c_start(adap);
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_8_lsb = (addr & I2C_ADDR_MSK);
+		iowrite32(addr_8_lsb, p + PCH_I2CDR);
+	} else {
+		/* set 7 bit slave address and R/W bit as 0 */
+		iowrite32(addr << 1, p + PCH_I2CDR);
+		if (first)
+			pch_i2c_start(adap);
+	}
+
+	rtn = pch_i2c_wait_for_check_xfer(adap);
+	if (rtn)
+		return rtn;
+
+	for (wrcount = 0; wrcount < length; ++wrcount) {
+		/* write buffer value to I2C data register */
+		iowrite32(buf[wrcount], p + PCH_I2CDR);
+		pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+	}
+
+	/* check if this is the last message */
+	if (last)
+		pch_i2c_stop(adap);
+	else
+		pch_i2c_repstart(adap);
+
+	pch_dbg(adap, "return=%d\n", wrcount);
+
+	return wrcount;
+}
+
+/**
+ * pch_i2c_sendack() - send ACK
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_sendack(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
+}
+
+/**
+ * pch_i2c_sendnack() - send NACK
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
+}
+
+/**
+ * pch_i2c_restart() - Generate I2C restart condition in normal mode.
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ *
+ * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
+ */
+static void pch_i2c_restart(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART);
+}
+
+/**
+ * pch_i2c_readbytes() - read data  from I2C bus in normal mode.
+ * @i2c_adap:	Pointer to the struct i2c_adapter.
+ * @msgs:	Pointer to i2c_msg structure.
+ * @last:	specifies whether last message or not.
+ * @first:	specifies whether first message or not.
+ */
+static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+			     u32 last, u32 first)
+{
+	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
+
+	u8 *buf;
+	u32 count;
+	u32 length;
+	u32 addr;
+	u32 addr_2_msb;
+	u32 addr_8_lsb;
+	void __iomem *p = adap->pch_base_address;
+	s32 rtn;
+
+	length = msgs->len;
+	buf = msgs->buf;
+	addr = msgs->addr;
+
+	/* enable master reception */
+	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
+
+	if (first) {
+		if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
+			return -ETIME;
+	}
+
+	if (msgs->flags & I2C_M_TEN) {
+		addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
+		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
+		if (first)
+			pch_i2c_start(adap);
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_8_lsb = (addr & I2C_ADDR_MSK);
+		iowrite32(addr_8_lsb, p + PCH_I2CDR);
+
+		pch_i2c_restart(adap);
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_2_msb |= I2C_RD;
+		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
+	} else {
+		/* 7 address bits + R/W bit */
+		addr = (((addr) << 1) | (I2C_RD));
+		iowrite32(addr, p + PCH_I2CDR);
+	}
+
+	/* check if it is the first message */
+	if (first)
+		pch_i2c_start(adap);
+
+	rtn = pch_i2c_wait_for_check_xfer(adap);
+	if (rtn)
+		return rtn;
+
+	if (length == 0) {
+		pch_i2c_stop(adap);
+		ioread32(p + PCH_I2CDR); /* Dummy read needs */
+
+		count = length;
+	} else {
+		int read_index;
+		int loop;
+		pch_i2c_sendack(adap);
+
+		/* Dummy read */
+		for (loop = 1, read_index = 0; loop < length; loop++) {
+			buf[read_index] = ioread32(p + PCH_I2CDR);
+
+			if (loop != 1)
+				read_index++;
+
+			rtn = pch_i2c_wait_for_check_xfer(adap);
+			if (rtn)
+				return rtn;
+		}	/* end for */
+
+		pch_i2c_sendnack(adap);
+
+		buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */
+
+		if (length != 1)
+			read_index++;
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		if (last)
+			pch_i2c_stop(adap);
+		else
+			pch_i2c_repstart(adap);
+
+		buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */
+		count = read_index;
+	}
+
+	return count;
+}
+
+/**
+ * pch_i2c_cb() - Interrupt handler Call back function
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
+{
+	u32 sts;
+	void __iomem *p = adap->pch_base_address;
+
+	sts = ioread32(p + PCH_I2CSR);
+	sts &= (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT);
+	if (sts & I2CMAL_BIT)
+		adap->pch_event_flag |= I2CMAL_EVENT;
+
+	if (sts & I2CMCF_BIT)
+		adap->pch_event_flag |= I2CMCF_EVENT;
+
+	/* clear the applicable bits */
+	pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts);
+
+	pch_dbg(adap, "PCH_I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+
+	wake_up(&pch_event);
+}
+
+/**
+ * pch_i2c_handler() - interrupt handler for the PCH I2C controller
+ * @irq:	irq number.
+ * @pData:	cookie passed back to the handler function.
+ */
+static irqreturn_t pch_i2c_handler(int irq, void *pData)
+{
+	u32 reg_val;
+	int flag;
+	int i;
+	struct adapter_info *adap_info = pData;
+	void __iomem *p;
+	u32 mode;
+
+	for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
+		p = adap_info->pch_data[i].pch_base_address;
+		mode = ioread32(p + PCH_I2CMOD);
+		mode &= BUFFER_MODE | EEPROM_SR_MODE;
+		if (mode != NORMAL_MODE) {
+			pch_err(adap_info->pch_data,
+				"I2C-%d mode(%d) is not supported\n", mode, i);
+			continue;
+		}
+		reg_val = ioread32(p + PCH_I2CSR);
+		if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
+			pch_i2c_cb(&adap_info->pch_data[i]);
+			flag = 1;
+		}
+	}
+
+	return flag ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/**
+ * pch_i2c_xfer() - Reading adnd writing data through I2C bus
+ * @i2c_adap:	Pointer to the struct i2c_adapter.
+ * @msgs:	Pointer to i2c_msg structure.
+ * @num:	number of messages.
+ */
+static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
+			struct i2c_msg *msgs, s32 num)
+{
+	struct i2c_msg *pmsg;
+	u32 i = 0;
+	u32 status;
+	s32 ret;
+
+	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
+
+	ret = mutex_lock_interruptible(&pch_mutex);
+	if (ret)
+		return ret;
+
+	if (adap->p_adapter_info->pch_i2c_suspended) {
+		mutex_unlock(&pch_mutex);
+		return -EBUSY;
+	}
+
+	pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
+		adap->p_adapter_info->pch_i2c_suspended);
+	/* transfer not completed */
+	adap->pch_i2c_xfer_in_progress = true;
+
+	for (i = 0; i < num && ret >= 0; i++) {
+		pmsg = &msgs[i];
+		pmsg->flags |= adap->pch_buff_mode_en;
+		status = pmsg->flags;
+		pch_dbg(adap,
+			"After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
+
+		if ((status & (I2C_M_RD)) != false) {
+			ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
+						(i == 0));
+		} else {
+			ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
+						 (i == 0));
+		}
+	}
+
+	adap->pch_i2c_xfer_in_progress = false;	/* transfer completed */
+
+	mutex_unlock(&pch_mutex);
+
+	return (ret < 0) ? ret : num;
+}
+
+/**
+ * pch_i2c_func() - return the functionality of the I2C driver
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static u32 pch_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm pch_algorithm = {
+	.master_xfer = pch_i2c_xfer,
+	.functionality = pch_i2c_func
+};
+
+/**
+ * pch_i2c_disbl_int() - Disable PCH I2C interrupts
+ * @adap:	Pointer to struct i2c_algo_pch_data.
+ */
+static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
+{
+	void __iomem *p = adap->pch_base_address;
+
+	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, NORMAL_INTR_ENBL);
+
+	iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK);
+
+	iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK);
+}
+
+static int pch_i2c_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	void __iomem *base_addr;
+	int ret;
+	int i, j;
+	struct adapter_info *adap_info;
+	struct i2c_adapter *pch_adap;
+
+	pch_pci_dbg(pdev, "Entered.\n");
+
+	adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL);
+	if (adap_info == NULL)
+		return -ENOMEM;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		pch_pci_err(pdev, "pci_enable_device FAILED\n");
+		goto err_pci_enable;
+	}
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret) {
+		pch_pci_err(pdev, "pci_request_regions FAILED\n");
+		goto err_pci_req;
+	}
+
+	base_addr = pci_iomap(pdev, 1, 0);
+
+	if (base_addr == NULL) {
+		pch_pci_err(pdev, "pci_iomap FAILED\n");
+		ret = -ENOMEM;
+		goto err_pci_iomap;
+	}
+
+	/* Set the number of I2C channel instance */
+	adap_info->ch_num = id->driver_data;
+
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_adap = &adap_info->pch_data[i].pch_adapter;
+		adap_info->pch_i2c_suspended = false;
+
+		adap_info->pch_data[i].p_adapter_info = adap_info;
+
+		pch_adap->owner = THIS_MODULE;
+		pch_adap->class = I2C_CLASS_HWMON;
+		strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
+		pch_adap->algo = &pch_algorithm;
+		pch_adap->algo_data = &adap_info->pch_data[i];
+
+		/* base_addr + offset; */
+		adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
+
+		pch_adap->dev.of_node = pdev->dev.of_node;
+		pch_adap->dev.parent = &pdev->dev;
+	}
+
+	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+		  KBUILD_MODNAME, adap_info);
+	if (ret) {
+		pch_pci_err(pdev, "request_irq FAILED\n");
+		goto err_request_irq;
+	}
+
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_adap = &adap_info->pch_data[i].pch_adapter;
+
+		pch_i2c_init(&adap_info->pch_data[i]);
+
+		pch_adap->nr = i;
+		ret = i2c_add_numbered_adapter(pch_adap);
+		if (ret) {
+			pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
+			goto err_add_adapter;
+		}
+	}
+
+	pci_set_drvdata(pdev, adap_info);
+	pch_pci_dbg(pdev, "returns %d.\n", ret);
+	return 0;
+
+err_add_adapter:
+	for (j = 0; j < i; j++)
+		i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
+	free_irq(pdev->irq, adap_info);
+err_request_irq:
+	pci_iounmap(pdev, base_addr);
+err_pci_iomap:
+	pci_release_regions(pdev);
+err_pci_req:
+	pci_disable_device(pdev);
+err_pci_enable:
+	kfree(adap_info);
+	return ret;
+}
+
+static void pch_i2c_remove(struct pci_dev *pdev)
+{
+	int i;
+	struct adapter_info *adap_info = pci_get_drvdata(pdev);
+
+	free_irq(pdev->irq, adap_info);
+
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_i2c_disbl_int(&adap_info->pch_data[i]);
+		i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
+	}
+
+	if (adap_info->pch_data[0].pch_base_address)
+		pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
+
+	for (i = 0; i < adap_info->ch_num; i++)
+		adap_info->pch_data[i].pch_base_address = NULL;
+
+	pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+	kfree(adap_info);
+}
+
+#ifdef CONFIG_PM
+static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int ret;
+	int i;
+	struct adapter_info *adap_info = pci_get_drvdata(pdev);
+	void __iomem *p = adap_info->pch_data[0].pch_base_address;
+
+	adap_info->pch_i2c_suspended = true;
+
+	for (i = 0; i < adap_info->ch_num; i++) {
+		while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
+			/* Wait until all channel transfers are completed */
+			msleep(20);
+		}
+	}
+
+	/* Disable the i2c interrupts */
+	for (i = 0; i < adap_info->ch_num; i++)
+		pch_i2c_disbl_int(&adap_info->pch_data[i]);
+
+	pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
+		"invoked function pch_i2c_disbl_int successfully\n",
+		ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
+		ioread32(p + PCH_I2CESRSTA));
+
+	ret = pci_save_state(pdev);
+
+	if (ret) {
+		pch_pci_err(pdev, "pci_save_state\n");
+		return ret;
+	}
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int pch_i2c_resume(struct pci_dev *pdev)
+{
+	int i;
+	struct adapter_info *adap_info = pci_get_drvdata(pdev);
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	if (pci_enable_device(pdev) < 0) {
+		pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
+		return -EIO;
+	}
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+
+	for (i = 0; i < adap_info->ch_num; i++)
+		pch_i2c_init(&adap_info->pch_data[i]);
+
+	adap_info->pch_i2c_suspended = false;
+
+	return 0;
+}
+#else
+#define pch_i2c_suspend NULL
+#define pch_i2c_resume NULL
+#endif
+
+static struct pci_driver pch_pcidriver = {
+	.name = KBUILD_MODNAME,
+	.id_table = pch_pcidev_id,
+	.probe = pch_i2c_probe,
+	.remove = pch_i2c_remove,
+	.suspend = pch_i2c_suspend,
+	.resume = pch_i2c_resume
+};
+
+module_pci_driver(pch_pcidriver);
+
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
+module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
+module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-elektor.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-elektor.c
new file mode 100644
index 0000000..5416003
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-elektor.c
@@ -0,0 +1,331 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-elektor.c i2c-hw access for PCF8584 style isa bus adaptes             */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.			     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* Partially rewriten by Oleg I. Vdovikin for mmapped support of
+   for Alpha Processor Inc. UP-2000(+) boards */
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+
+#include <linux/isa.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pcf.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include "../algos/i2c-algo-pcf.h"
+
+#define DEFAULT_BASE 0x330
+
+static int base;
+static u8 __iomem *base_iomem;
+
+static int irq;
+static int clock  = 0x1c;
+static int own    = 0x55;
+static int mmapped;
+
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
+  this module in real supports only one device, due to missing arguments
+  in some functions, called from the algo-pcf module. Sometimes it's
+  need to be rewriten - but for now just remove this for simpler reading */
+
+static wait_queue_head_t pcf_wait;
+static int pcf_pending;
+static spinlock_t lock;
+
+static struct i2c_adapter pcf_isa_ops;
+
+/* ----- local functions ----------------------------------------------	*/
+
+static void pcf_isa_setbyte(void *data, int ctl, int val)
+{
+	u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+
+	/* enable irq if any specified for serial operation */
+	if (ctl && irq && (val & I2C_PCF_ESO)) {
+		val |= I2C_PCF_ENI;
+	}
+
+	pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val);
+	iowrite8(val, address);
+#ifdef __alpha__
+	/* API UP2000 needs some hardware fudging to make the write stick */
+	iowrite8(val, address);
+#endif
+}
+
+static int pcf_isa_getbyte(void *data, int ctl)
+{
+	u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+	int val = ioread8(address);
+
+	pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val);
+	return (val);
+}
+
+static int pcf_isa_getown(void *data)
+{
+	return (own);
+}
+
+
+static int pcf_isa_getclock(void *data)
+{
+	return (clock);
+}
+
+static void pcf_isa_waitforpin(void *data)
+{
+	DEFINE_WAIT(wait);
+	int timeout = 2;
+	unsigned long flags;
+
+	if (irq > 0) {
+		spin_lock_irqsave(&lock, flags);
+		if (pcf_pending == 0) {
+			spin_unlock_irqrestore(&lock, flags);
+			prepare_to_wait(&pcf_wait, &wait, TASK_INTERRUPTIBLE);
+			if (schedule_timeout(timeout*HZ)) {
+				spin_lock_irqsave(&lock, flags);
+				if (pcf_pending == 1) {
+					pcf_pending = 0;
+				}
+				spin_unlock_irqrestore(&lock, flags);
+			}
+			finish_wait(&pcf_wait, &wait);
+		} else {
+			pcf_pending = 0;
+			spin_unlock_irqrestore(&lock, flags);
+		}
+	} else {
+		udelay(100);
+	}
+}
+
+
+static irqreturn_t pcf_isa_handler(int this_irq, void *dev_id) {
+	spin_lock(&lock);
+	pcf_pending = 1;
+	spin_unlock(&lock);
+	wake_up_interruptible(&pcf_wait);
+	return IRQ_HANDLED;
+}
+
+
+static int pcf_isa_init(void)
+{
+	spin_lock_init(&lock);
+	if (!mmapped) {
+		if (!request_region(base, 2, pcf_isa_ops.name)) {
+			printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
+			       "in use\n", pcf_isa_ops.name, base);
+			return -ENODEV;
+		}
+		base_iomem = ioport_map(base, 2);
+		if (!base_iomem) {
+			printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
+			       pcf_isa_ops.name, base);
+			release_region(base, 2);
+			return -ENODEV;
+		}
+	} else {
+		if (!request_mem_region(base, 2, pcf_isa_ops.name)) {
+			printk(KERN_ERR "%s: requested memory region (%#x:2) "
+			       "is in use\n", pcf_isa_ops.name, base);
+			return -ENODEV;
+		}
+		base_iomem = ioremap(base, 2);
+		if (base_iomem == NULL) {
+			printk(KERN_ERR "%s: remap of memory region %#x "
+			       "failed\n", pcf_isa_ops.name, base);
+			release_mem_region(base, 2);
+			return -ENODEV;
+		}
+	}
+	pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base,
+		 base_iomem);
+
+	if (irq > 0) {
+		if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name,
+				NULL) < 0) {
+			printk(KERN_ERR "%s: Request irq%d failed\n",
+			       pcf_isa_ops.name, irq);
+			irq = 0;
+		} else
+			enable_irq(irq);
+	}
+	return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Encapsulate the above functions in the correct operations structure.
+ * This is only done when more than one hardware adapter is supported.
+ */
+static struct i2c_algo_pcf_data pcf_isa_data = {
+	.setpcf	    = pcf_isa_setbyte,
+	.getpcf	    = pcf_isa_getbyte,
+	.getown	    = pcf_isa_getown,
+	.getclock   = pcf_isa_getclock,
+	.waitforpin = pcf_isa_waitforpin,
+};
+
+static struct i2c_adapter pcf_isa_ops = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo_data	= &pcf_isa_data,
+	.name		= "i2c-elektor",
+};
+
+static int elektor_match(struct device *dev, unsigned int id)
+{
+#ifdef __alpha__
+	/* check to see we have memory mapped PCF8584 connected to the
+	Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
+	if (base == 0) {
+		struct pci_dev *cy693_dev;
+
+		cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
+					   PCI_DEVICE_ID_CONTAQ_82C693, NULL);
+		if (cy693_dev) {
+			unsigned char config;
+			/* yeap, we've found cypress, let's check config */
+			if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
+
+				dev_dbg(dev, "found cy82c693, config "
+					"register 0x47 = 0x%02x\n", config);
+
+				/* UP2000 board has this register set to 0xe1,
+				   but the most significant bit as seems can be
+				   reset during the proper initialisation
+				   sequence if guys from API decides to do that
+				   (so, we can even enable Tsunami Pchip
+				   window for the upper 1 Gb) */
+
+				/* so just check for ROMCS at 0xe0000,
+				   ROMCS enabled for writes
+				   and external XD Bus buffer in use. */
+				if ((config & 0x7f) == 0x61) {
+					/* seems to be UP2000 like board */
+					base = 0xe0000;
+					mmapped = 1;
+					/* UP2000 drives ISA with
+					   8.25 MHz (PCI/4) clock
+					   (this can be read from cypress) */
+					clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
+					dev_info(dev, "found API UP2000 like "
+						 "board, will probe PCF8584 "
+						 "later\n");
+				}
+			}
+			pci_dev_put(cy693_dev);
+		}
+	}
+#endif
+
+	/* sanity checks for mmapped I/O */
+	if (mmapped && base < 0xc8000) {
+		dev_err(dev, "incorrect base address (%#x) specified "
+		       "for mmapped I/O\n", base);
+		return 0;
+	}
+
+	if (base == 0) {
+		base = DEFAULT_BASE;
+	}
+	return 1;
+}
+
+static int elektor_probe(struct device *dev, unsigned int id)
+{
+	init_waitqueue_head(&pcf_wait);
+	if (pcf_isa_init())
+		return -ENODEV;
+	pcf_isa_ops.dev.parent = dev;
+	if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
+		goto fail;
+
+	dev_info(dev, "found device at %#x\n", base);
+
+	return 0;
+
+ fail:
+	if (irq > 0) {
+		disable_irq(irq);
+		free_irq(irq, NULL);
+	}
+
+	if (!mmapped) {
+		ioport_unmap(base_iomem);
+		release_region(base, 2);
+	} else {
+		iounmap(base_iomem);
+		release_mem_region(base, 2);
+	}
+	return -ENODEV;
+}
+
+static int elektor_remove(struct device *dev, unsigned int id)
+{
+	i2c_del_adapter(&pcf_isa_ops);
+
+	if (irq > 0) {
+		disable_irq(irq);
+		free_irq(irq, NULL);
+	}
+
+	if (!mmapped) {
+		ioport_unmap(base_iomem);
+		release_region(base, 2);
+	} else {
+		iounmap(base_iomem);
+		release_mem_region(base, 2);
+	}
+
+	return 0;
+}
+
+static struct isa_driver i2c_elektor_driver = {
+	.match		= elektor_match,
+	.probe		= elektor_probe,
+	.remove		= elektor_remove,
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "i2c-elektor",
+	},
+};
+
+MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
+MODULE_LICENSE("GPL");
+
+module_param_hw(base, int, ioport_or_iomem, 0);
+module_param_hw(irq, int, irq, 0);
+module_param(clock, int, 0);
+module_param(own, int, 0);
+module_param_hw(mmapped, int, other, 0);
+module_isa_driver(i2c_elektor_driver, 1);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-emev2.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-emev2.c
new file mode 100644
index 0000000..dd97e5d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-emev2.c
@@ -0,0 +1,452 @@
+/*
+ * I2C driver for the Renesas EMEV2 SoC
+ *
+ * Copyright (C) 2015 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright 2013 Codethink Ltd.
+ * Copyright 2010-2015 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+/* I2C Registers */
+#define I2C_OFS_IICACT0		0x00	/* start */
+#define I2C_OFS_IIC0		0x04	/* shift */
+#define I2C_OFS_IICC0		0x08	/* control */
+#define I2C_OFS_SVA0		0x0c	/* slave address */
+#define I2C_OFS_IICCL0		0x10	/* clock select */
+#define I2C_OFS_IICX0		0x14	/* extension */
+#define I2C_OFS_IICS0		0x18	/* status */
+#define I2C_OFS_IICSE0		0x1c	/* status For emulation */
+#define I2C_OFS_IICF0		0x20	/* IIC flag */
+
+/* I2C IICACT0 Masks */
+#define I2C_BIT_IICE0		0x0001
+
+/* I2C IICC0 Masks */
+#define I2C_BIT_LREL0		0x0040
+#define I2C_BIT_WREL0		0x0020
+#define I2C_BIT_SPIE0		0x0010
+#define I2C_BIT_WTIM0		0x0008
+#define I2C_BIT_ACKE0		0x0004
+#define I2C_BIT_STT0		0x0002
+#define I2C_BIT_SPT0		0x0001
+
+/* I2C IICCL0 Masks */
+#define I2C_BIT_SMC0		0x0008
+#define I2C_BIT_DFC0		0x0004
+
+/* I2C IICSE0 Masks */
+#define I2C_BIT_MSTS0		0x0080
+#define I2C_BIT_ALD0		0x0040
+#define I2C_BIT_EXC0		0x0020
+#define I2C_BIT_COI0		0x0010
+#define I2C_BIT_TRC0		0x0008
+#define I2C_BIT_ACKD0		0x0004
+#define I2C_BIT_STD0		0x0002
+#define I2C_BIT_SPD0		0x0001
+
+/* I2C IICF0 Masks */
+#define I2C_BIT_STCF		0x0080
+#define I2C_BIT_IICBSY		0x0040
+#define I2C_BIT_STCEN		0x0002
+#define I2C_BIT_IICRSV		0x0001
+
+struct em_i2c_device {
+	void __iomem *base;
+	struct i2c_adapter adap;
+	struct completion msg_done;
+	struct clk *sclk;
+	struct i2c_client *slave;
+	int irq;
+};
+
+static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
+{
+	writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg);
+}
+
+static int em_i2c_wait_for_event(struct em_i2c_device *priv)
+{
+	unsigned long time_left;
+	int status;
+
+	reinit_completion(&priv->msg_done);
+
+	time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout);
+
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	status = readb(priv->base + I2C_OFS_IICSE0);
+	return status & I2C_BIT_ALD0 ? -EAGAIN : status;
+}
+
+static void em_i2c_stop(struct em_i2c_device *priv)
+{
+	/* Send Stop condition */
+	em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0);
+
+	/* Wait for stop condition */
+	em_i2c_wait_for_event(priv);
+}
+
+static void em_i2c_reset(struct i2c_adapter *adap)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int retr;
+
+	/* If I2C active */
+	if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) {
+		/* Disable I2C operation */
+		writeb(0, priv->base + I2C_OFS_IICACT0);
+
+		retr = 1000;
+		while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr)
+			retr--;
+		WARN_ON(retr == 0);
+	}
+
+	/* Transfer mode set */
+	writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0);
+
+	/* Can Issue start without detecting a stop, Reservation disabled. */
+	writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0);
+
+	/* I2C enable, 9 bit interrupt mode */
+	writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0);
+
+	/* Enable I2C operation */
+	writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0);
+
+	retr = 1000;
+	while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr)
+		retr--;
+	WARN_ON(retr == 0);
+}
+
+static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+				int stop)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int count, status, read = !!(msg->flags & I2C_M_RD);
+
+	/* Send start condition */
+	em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0);
+	em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
+
+	/* Send slave address and R/W type */
+	writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0);
+
+	/* Wait for transaction */
+	status = em_i2c_wait_for_event(priv);
+	if (status < 0)
+		goto out_reset;
+
+	/* Received NACK (result of setting slave address and R/W) */
+	if (!(status & I2C_BIT_ACKD0)) {
+		em_i2c_stop(priv);
+		goto out;
+	}
+
+	/* Extra setup for read transactions */
+	if (read) {
+		/* 8 bit interrupt mode */
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0);
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0);
+
+		/* Wait for transaction */
+		status = em_i2c_wait_for_event(priv);
+		if (status < 0)
+			goto out_reset;
+	}
+
+	/* Send / receive data */
+	for (count = 0; count < msg->len; count++) {
+		if (read) { /* Read transaction */
+			msg->buf[count] = readb(priv->base + I2C_OFS_IIC0);
+			em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0);
+
+		} else { /* Write transaction */
+			/* Received NACK */
+			if (!(status & I2C_BIT_ACKD0)) {
+				em_i2c_stop(priv);
+				goto out;
+			}
+
+			/* Write data */
+			writeb(msg->buf[count], priv->base + I2C_OFS_IIC0);
+		}
+
+		/* Wait for R/W transaction */
+		status = em_i2c_wait_for_event(priv);
+		if (status < 0)
+			goto out_reset;
+	}
+
+	if (stop)
+		em_i2c_stop(priv);
+
+	return count;
+
+out_reset:
+	em_i2c_reset(adap);
+out:
+	return status < 0 ? status : -ENXIO;
+}
+
+static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+	int num)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(adap);
+	int ret, i;
+
+	if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1)));
+		if (ret < 0)
+			return ret;
+	}
+
+	/* I2C transfer completed */
+	return num;
+}
+
+static bool em_i2c_slave_irq(struct em_i2c_device *priv)
+{
+	u8 status, value;
+	enum i2c_slave_event event;
+	int ret;
+
+	if (!priv->slave)
+		return false;
+
+	status = readb(priv->base + I2C_OFS_IICSE0);
+
+	/* Extension code, do not participate */
+	if (status & I2C_BIT_EXC0) {
+		em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		return true;
+	}
+
+	/* Stop detected, we don't know if it's for slave or master */
+	if (status & I2C_BIT_SPD0) {
+		/* Notify slave device */
+		i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
+		/* Pretend we did not handle the interrupt */
+		return false;
+	}
+
+	/* Only handle interrupts addressed to us */
+	if (!(status & I2C_BIT_COI0))
+		return false;
+
+	/* Enable stop interrupts */
+	em_clear_set_bit(priv, 0, I2C_BIT_SPIE0, I2C_OFS_IICC0);
+
+	/* Transmission or Reception */
+	if (status & I2C_BIT_TRC0) {
+		if (status & I2C_BIT_ACKD0) {
+			/* 9 bit interrupt mode */
+			em_clear_set_bit(priv, 0, I2C_BIT_WTIM0, I2C_OFS_IICC0);
+
+			/* Send data */
+			event = status & I2C_BIT_STD0 ?
+				I2C_SLAVE_READ_REQUESTED :
+				I2C_SLAVE_READ_PROCESSED;
+			i2c_slave_event(priv->slave, event, &value);
+			writeb(value, priv->base + I2C_OFS_IIC0);
+		} else {
+			/* NACK, stop transmitting */
+			em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		}
+	} else {
+		/* 8 bit interrupt mode */
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0,
+				I2C_OFS_IICC0);
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0,
+				I2C_OFS_IICC0);
+
+		if (status & I2C_BIT_STD0) {
+			i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED,
+					&value);
+		} else {
+			/* Recv data */
+			value = readb(priv->base + I2C_OFS_IIC0);
+			ret = i2c_slave_event(priv->slave,
+					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (ret < 0)
+				em_clear_set_bit(priv, I2C_BIT_ACKE0, 0,
+						I2C_OFS_IICC0);
+		}
+	}
+
+	return true;
+}
+
+static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id)
+{
+	struct em_i2c_device *priv = dev_id;
+
+	if (em_i2c_slave_irq(priv))
+		return IRQ_HANDLED;
+
+	complete(&priv->msg_done);
+
+	return IRQ_HANDLED;
+}
+
+static u32 em_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SLAVE;
+}
+
+static int em_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	if (priv->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	priv->slave = slave;
+
+	/* Set slave address */
+	writeb(slave->addr << 1, priv->base + I2C_OFS_SVA0);
+
+	return 0;
+}
+
+static int em_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	WARN_ON(!priv->slave);
+
+	writeb(0, priv->base + I2C_OFS_SVA0);
+
+	/*
+	 * Wait for interrupt to finish. New slave irqs cannot happen because we
+	 * cleared the slave address and, thus, only extension codes will be
+	 * detected which do not use the slave ptr.
+	 */
+	synchronize_irq(priv->irq);
+	priv->slave = NULL;
+
+	return 0;
+}
+
+static const struct i2c_algorithm em_i2c_algo = {
+	.master_xfer = em_i2c_xfer,
+	.functionality = em_i2c_func,
+	.reg_slave      = em_i2c_reg_slave,
+	.unreg_slave    = em_i2c_unreg_slave,
+};
+
+static int em_i2c_probe(struct platform_device *pdev)
+{
+	struct em_i2c_device *priv;
+	struct resource *r;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	strlcpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
+
+	priv->sclk = devm_clk_get(&pdev->dev, "sclk");
+	if (IS_ERR(priv->sclk))
+		return PTR_ERR(priv->sclk);
+
+	ret = clk_prepare_enable(priv->sclk);
+	if (ret)
+		return ret;
+
+	priv->adap.timeout = msecs_to_jiffies(100);
+	priv->adap.retries = 5;
+	priv->adap.dev.parent = &pdev->dev;
+	priv->adap.algo = &em_i2c_algo;
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.dev.of_node = pdev->dev.of_node;
+
+	init_completion(&priv->msg_done);
+
+	platform_set_drvdata(pdev, priv);
+	i2c_set_adapdata(&priv->adap, priv);
+
+	em_i2c_reset(&priv->adap);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
+				"em_i2c", priv);
+	if (ret)
+		goto err_clk;
+
+	ret = i2c_add_adapter(&priv->adap);
+
+	if (ret)
+		goto err_clk;
+
+	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
+		 priv->irq);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(priv->sclk);
+	return ret;
+}
+
+static int em_i2c_remove(struct platform_device *dev)
+{
+	struct em_i2c_device *priv = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&priv->adap);
+	clk_disable_unprepare(priv->sclk);
+
+	return 0;
+}
+
+static const struct of_device_id em_i2c_ids[] = {
+	{ .compatible = "renesas,iic-emev2", },
+	{ }
+};
+
+static struct platform_driver em_i2c_driver = {
+	.probe = em_i2c_probe,
+	.remove = em_i2c_remove,
+	.driver = {
+		.name = "em-i2c",
+		.of_match_table = em_i2c_ids,
+	}
+};
+module_platform_driver(em_i2c_driver);
+
+MODULE_DESCRIPTION("EMEV2 I2C bus driver");
+MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, em_i2c_ids);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-exynos5.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-exynos5.c
new file mode 100644
index 0000000..3855e0b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-exynos5.c
@@ -0,0 +1,858 @@
+/**
+ * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+
+/*
+ * HSI2C controller from Samsung supports 2 modes of operation
+ * 1. Auto mode: Where in master automatically controls the whole transaction
+ * 2. Manual mode: Software controls the transaction by issuing commands
+ *    START, READ, WRITE, STOP, RESTART in I2C_MANUAL_CMD register.
+ *
+ * Operation mode can be selected by setting AUTO_MODE bit in I2C_CONF register
+ *
+ * Special bits are available for both modes of operation to set commands
+ * and for checking transfer status
+ */
+
+/* Register Map */
+#define HSI2C_CTL		0x00
+#define HSI2C_FIFO_CTL		0x04
+#define HSI2C_TRAILIG_CTL	0x08
+#define HSI2C_CLK_CTL		0x0C
+#define HSI2C_CLK_SLOT		0x10
+#define HSI2C_INT_ENABLE	0x20
+#define HSI2C_INT_STATUS	0x24
+#define HSI2C_ERR_STATUS	0x2C
+#define HSI2C_FIFO_STATUS	0x30
+#define HSI2C_TX_DATA		0x34
+#define HSI2C_RX_DATA		0x38
+#define HSI2C_CONF		0x40
+#define HSI2C_AUTO_CONF		0x44
+#define HSI2C_TIMEOUT		0x48
+#define HSI2C_MANUAL_CMD	0x4C
+#define HSI2C_TRANS_STATUS	0x50
+#define HSI2C_TIMING_HS1	0x54
+#define HSI2C_TIMING_HS2	0x58
+#define HSI2C_TIMING_HS3	0x5C
+#define HSI2C_TIMING_FS1	0x60
+#define HSI2C_TIMING_FS2	0x64
+#define HSI2C_TIMING_FS3	0x68
+#define HSI2C_TIMING_SLA	0x6C
+#define HSI2C_ADDR		0x70
+
+/* I2C_CTL Register bits */
+#define HSI2C_FUNC_MODE_I2C			(1u << 0)
+#define HSI2C_MASTER				(1u << 3)
+#define HSI2C_RXCHON				(1u << 6)
+#define HSI2C_TXCHON				(1u << 7)
+#define HSI2C_SW_RST				(1u << 31)
+
+/* I2C_FIFO_CTL Register bits */
+#define HSI2C_RXFIFO_EN				(1u << 0)
+#define HSI2C_TXFIFO_EN				(1u << 1)
+#define HSI2C_RXFIFO_TRIGGER_LEVEL(x)		((x) << 4)
+#define HSI2C_TXFIFO_TRIGGER_LEVEL(x)		((x) << 16)
+
+/* I2C_TRAILING_CTL Register bits */
+#define HSI2C_TRAILING_COUNT			(0xf)
+
+/* I2C_INT_EN Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY_EN		(1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL_EN		(1u << 1)
+#define HSI2C_INT_TRAILING_EN			(1u << 6)
+
+/* I2C_INT_STAT Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY		(1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL			(1u << 1)
+#define HSI2C_INT_TX_UNDERRUN			(1u << 2)
+#define HSI2C_INT_TX_OVERRUN			(1u << 3)
+#define HSI2C_INT_RX_UNDERRUN			(1u << 4)
+#define HSI2C_INT_RX_OVERRUN			(1u << 5)
+#define HSI2C_INT_TRAILING			(1u << 6)
+#define HSI2C_INT_I2C				(1u << 9)
+
+#define HSI2C_INT_TRANS_DONE			(1u << 7)
+#define HSI2C_INT_TRANS_ABORT			(1u << 8)
+#define HSI2C_INT_NO_DEV_ACK			(1u << 9)
+#define HSI2C_INT_NO_DEV			(1u << 10)
+#define HSI2C_INT_TIMEOUT			(1u << 11)
+#define HSI2C_INT_I2C_TRANS			(HSI2C_INT_TRANS_DONE |	\
+						HSI2C_INT_TRANS_ABORT |	\
+						HSI2C_INT_NO_DEV_ACK |	\
+						HSI2C_INT_NO_DEV |	\
+						HSI2C_INT_TIMEOUT)
+
+/* I2C_FIFO_STAT Register bits */
+#define HSI2C_RX_FIFO_EMPTY			(1u << 24)
+#define HSI2C_RX_FIFO_FULL			(1u << 23)
+#define HSI2C_RX_FIFO_LVL(x)			((x >> 16) & 0x7f)
+#define HSI2C_TX_FIFO_EMPTY			(1u << 8)
+#define HSI2C_TX_FIFO_FULL			(1u << 7)
+#define HSI2C_TX_FIFO_LVL(x)			((x >> 0) & 0x7f)
+
+/* I2C_CONF Register bits */
+#define HSI2C_AUTO_MODE				(1u << 31)
+#define HSI2C_10BIT_ADDR_MODE			(1u << 30)
+#define HSI2C_HS_MODE				(1u << 29)
+
+/* I2C_AUTO_CONF Register bits */
+#define HSI2C_READ_WRITE			(1u << 16)
+#define HSI2C_STOP_AFTER_TRANS			(1u << 17)
+#define HSI2C_MASTER_RUN			(1u << 31)
+
+/* I2C_TIMEOUT Register bits */
+#define HSI2C_TIMEOUT_EN			(1u << 31)
+#define HSI2C_TIMEOUT_MASK			0xff
+
+/* I2C_TRANS_STATUS register bits */
+#define HSI2C_MASTER_BUSY			(1u << 17)
+#define HSI2C_SLAVE_BUSY			(1u << 16)
+
+/* I2C_TRANS_STATUS register bits for Exynos5 variant */
+#define HSI2C_TIMEOUT_AUTO			(1u << 4)
+#define HSI2C_NO_DEV				(1u << 3)
+#define HSI2C_NO_DEV_ACK			(1u << 2)
+#define HSI2C_TRANS_ABORT			(1u << 1)
+#define HSI2C_TRANS_DONE			(1u << 0)
+
+/* I2C_TRANS_STATUS register bits for Exynos7 variant */
+#define HSI2C_MASTER_ST_MASK			0xf
+#define HSI2C_MASTER_ST_IDLE			0x0
+#define HSI2C_MASTER_ST_START			0x1
+#define HSI2C_MASTER_ST_RESTART			0x2
+#define HSI2C_MASTER_ST_STOP			0x3
+#define HSI2C_MASTER_ST_MASTER_ID		0x4
+#define HSI2C_MASTER_ST_ADDR0			0x5
+#define HSI2C_MASTER_ST_ADDR1			0x6
+#define HSI2C_MASTER_ST_ADDR2			0x7
+#define HSI2C_MASTER_ST_ADDR_SR			0x8
+#define HSI2C_MASTER_ST_READ			0x9
+#define HSI2C_MASTER_ST_WRITE			0xa
+#define HSI2C_MASTER_ST_NO_ACK			0xb
+#define HSI2C_MASTER_ST_LOSE			0xc
+#define HSI2C_MASTER_ST_WAIT			0xd
+#define HSI2C_MASTER_ST_WAIT_CMD		0xe
+
+/* I2C_ADDR register bits */
+#define HSI2C_SLV_ADDR_SLV(x)			((x & 0x3ff) << 0)
+#define HSI2C_SLV_ADDR_MAS(x)			((x & 0x3ff) << 10)
+#define HSI2C_MASTER_ID(x)			((x & 0xff) << 24)
+#define MASTER_ID(x)				((x & 0x7) + 0x08)
+
+/*
+ * Controller operating frequency, timing values for operation
+ * are calculated against this frequency
+ */
+#define HSI2C_HS_TX_CLOCK	1000000
+#define HSI2C_FS_TX_CLOCK	100000
+
+#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+#define HSI2C_EXYNOS7	BIT(0)
+
+struct exynos5_i2c {
+	struct i2c_adapter	adap;
+	unsigned int		suspended:1;
+
+	struct i2c_msg		*msg;
+	struct completion	msg_complete;
+	unsigned int		msg_ptr;
+
+	unsigned int		irq;
+
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct device		*dev;
+	int			state;
+
+	spinlock_t		lock;		/* IRQ synchronization */
+
+	/*
+	 * Since the TRANS_DONE bit is cleared on read, and we may read it
+	 * either during an IRQ or after a transaction, keep track of its
+	 * state here.
+	 */
+	int			trans_done;
+
+	/* Controller operating frequency */
+	unsigned int		op_clock;
+
+	/* Version of HS-I2C Hardware */
+	const struct exynos_hsi2c_variant *variant;
+};
+
+/**
+ * struct exynos_hsi2c_variant - platform specific HSI2C driver data
+ * @fifo_depth: the fifo depth supported by the HSI2C module
+ *
+ * Specifies platform specific configuration of HSI2C module.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct exynos_hsi2c_variant {
+	unsigned int	fifo_depth;
+	unsigned int	hw;
+};
+
+static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = {
+	.fifo_depth	= 64,
+};
+
+static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = {
+	.fifo_depth	= 16,
+};
+
+static const struct exynos_hsi2c_variant exynos7_hsi2c_data = {
+	.fifo_depth	= 16,
+	.hw		= HSI2C_EXYNOS7,
+};
+
+static const struct of_device_id exynos5_i2c_match[] = {
+	{
+		.compatible = "samsung,exynos5-hsi2c",
+		.data = &exynos5250_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos5250-hsi2c",
+		.data = &exynos5250_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos5260-hsi2c",
+		.data = &exynos5260_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos7-hsi2c",
+		.data = &exynos7_hsi2c_data
+	}, {},
+};
+MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
+
+static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
+{
+	writel(readl(i2c->regs + HSI2C_INT_STATUS),
+				i2c->regs + HSI2C_INT_STATUS);
+}
+
+/*
+ * exynos5_i2c_set_timing: updates the registers with appropriate
+ * timing values calculated
+ *
+ * Returns 0 on success, -EINVAL if the cycle length cannot
+ * be calculated.
+ */
+static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
+{
+	u32 i2c_timing_s1;
+	u32 i2c_timing_s2;
+	u32 i2c_timing_s3;
+	u32 i2c_timing_sla;
+	unsigned int t_start_su, t_start_hd;
+	unsigned int t_stop_su;
+	unsigned int t_data_su, t_data_hd;
+	unsigned int t_scl_l, t_scl_h;
+	unsigned int t_sr_release;
+	unsigned int t_ftl_cycle;
+	unsigned int clkin = clk_get_rate(i2c->clk);
+	unsigned int op_clk = hs_timings ? i2c->op_clock :
+		(i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK :
+		i2c->op_clock;
+	int div, clk_cycle, temp;
+
+	/*
+	 * In case of HSI2C controller in Exynos5 series
+	 * FPCLK / FI2C =
+	 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+	 *
+	 * In case of HSI2C controllers in Exynos7 series
+	 * FPCLK / FI2C =
+	 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + FLT_CYCLE
+	 *
+	 * clk_cycle := TSCLK_L + TSCLK_H
+	 * temp := (CLK_DIV + 1) * (clk_cycle + 2)
+	 *
+	 * Constraints: 4 <= temp, 0 <= CLK_DIV < 256, 2 <= clk_cycle <= 510
+	 *
+	 */
+	t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
+	temp = clkin / op_clk - 8 - t_ftl_cycle;
+	if (i2c->variant->hw != HSI2C_EXYNOS7)
+		temp -= t_ftl_cycle;
+	div = temp / 512;
+	clk_cycle = temp / (div + 1) - 2;
+	if (temp < 4 || div >= 256 || clk_cycle < 2) {
+		dev_err(i2c->dev, "%s clock set-up failed\n",
+			hs_timings ? "HS" : "FS");
+		return -EINVAL;
+	}
+
+	t_scl_l = clk_cycle / 2;
+	t_scl_h = clk_cycle / 2;
+	t_start_su = t_scl_l;
+	t_start_hd = t_scl_l;
+	t_stop_su = t_scl_l;
+	t_data_su = t_scl_l / 2;
+	t_data_hd = t_scl_l / 2;
+	t_sr_release = clk_cycle;
+
+	i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
+	i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
+	i2c_timing_s3 = div << 16 | t_sr_release << 0;
+	i2c_timing_sla = t_data_hd << 0;
+
+	dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n",
+		t_start_su, t_start_hd, t_stop_su);
+	dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n",
+		t_data_su, t_scl_l, t_scl_h);
+	dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n",
+		div, t_sr_release);
+	dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd);
+
+	if (hs_timings) {
+		writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1);
+		writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2);
+		writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3);
+	} else {
+		writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1);
+		writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2);
+		writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3);
+	}
+	writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA);
+
+	return 0;
+}
+
+static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
+{
+	/* always set Fast Speed timings */
+	int ret = exynos5_i2c_set_timing(i2c, false);
+
+	if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK)
+		return ret;
+
+	return exynos5_i2c_set_timing(i2c, true);
+}
+
+/*
+ * exynos5_i2c_init: configures the controller for I2C functionality
+ * Programs I2C controller for Master mode operation
+ */
+static void exynos5_i2c_init(struct exynos5_i2c *i2c)
+{
+	u32 i2c_conf = readl(i2c->regs + HSI2C_CONF);
+	u32 i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT);
+
+	/* Clear to disable Timeout */
+	i2c_timeout &= ~HSI2C_TIMEOUT_EN;
+	writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT);
+
+	writel((HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
+					i2c->regs + HSI2C_CTL);
+	writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
+
+	if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) {
+		writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
+					i2c->regs + HSI2C_ADDR);
+		i2c_conf |= HSI2C_HS_MODE;
+	}
+
+	writel(i2c_conf | HSI2C_AUTO_MODE, i2c->regs + HSI2C_CONF);
+}
+
+static void exynos5_i2c_reset(struct exynos5_i2c *i2c)
+{
+	u32 i2c_ctl;
+
+	/* Set and clear the bit for reset */
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl |= HSI2C_SW_RST;
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl &= ~HSI2C_SW_RST;
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+	/* We don't expect calculations to fail during the run */
+	exynos5_hsi2c_clock_setup(i2c);
+	/* Initialize the configure registers */
+	exynos5_i2c_init(i2c);
+}
+
+/*
+ * exynos5_i2c_irq: top level IRQ servicing routine
+ *
+ * INT_STATUS registers gives the interrupt details. Further,
+ * FIFO_STATUS or TRANS_STATUS registers are to be check for detailed
+ * state of the bus.
+ */
+static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
+{
+	struct exynos5_i2c *i2c = dev_id;
+	u32 fifo_level, int_status, fifo_status, trans_status;
+	unsigned char byte;
+	int len = 0;
+
+	i2c->state = -EINVAL;
+
+	spin_lock(&i2c->lock);
+
+	int_status = readl(i2c->regs + HSI2C_INT_STATUS);
+	writel(int_status, i2c->regs + HSI2C_INT_STATUS);
+
+	/* handle interrupt related to the transfer status */
+	if (i2c->variant->hw == HSI2C_EXYNOS7) {
+		if (int_status & HSI2C_INT_TRANS_DONE) {
+			i2c->trans_done = 1;
+			i2c->state = 0;
+		} else if (int_status & HSI2C_INT_TRANS_ABORT) {
+			dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		} else if (int_status & HSI2C_INT_NO_DEV_ACK) {
+			dev_dbg(i2c->dev, "No ACK from device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (int_status & HSI2C_INT_NO_DEV) {
+			dev_dbg(i2c->dev, "No device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (int_status & HSI2C_INT_TIMEOUT) {
+			dev_dbg(i2c->dev, "Accessing device timed out\n");
+			i2c->state = -ETIMEDOUT;
+			goto stop;
+		}
+
+		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+		if ((trans_status & HSI2C_MASTER_ST_MASK) == HSI2C_MASTER_ST_LOSE) {
+			i2c->state = -EAGAIN;
+			goto stop;
+		}
+	} else if (int_status & HSI2C_INT_I2C) {
+		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+		if (trans_status & HSI2C_NO_DEV_ACK) {
+			dev_dbg(i2c->dev, "No ACK from device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (trans_status & HSI2C_NO_DEV) {
+			dev_dbg(i2c->dev, "No device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (trans_status & HSI2C_TRANS_ABORT) {
+			dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		} else if (trans_status & HSI2C_TIMEOUT_AUTO) {
+			dev_dbg(i2c->dev, "Accessing device timed out\n");
+			i2c->state = -ETIMEDOUT;
+			goto stop;
+		} else if (trans_status & HSI2C_TRANS_DONE) {
+			i2c->trans_done = 1;
+			i2c->state = 0;
+		}
+	}
+
+	if ((i2c->msg->flags & I2C_M_RD) && (int_status &
+			(HSI2C_INT_TRAILING | HSI2C_INT_RX_ALMOSTFULL))) {
+		fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+		fifo_level = HSI2C_RX_FIFO_LVL(fifo_status);
+		len = min(fifo_level, i2c->msg->len - i2c->msg_ptr);
+
+		while (len > 0) {
+			byte = (unsigned char)
+				readl(i2c->regs + HSI2C_RX_DATA);
+			i2c->msg->buf[i2c->msg_ptr++] = byte;
+			len--;
+		}
+		i2c->state = 0;
+	} else if (int_status & HSI2C_INT_TX_ALMOSTEMPTY) {
+		fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+		fifo_level = HSI2C_TX_FIFO_LVL(fifo_status);
+
+		len = i2c->variant->fifo_depth - fifo_level;
+		if (len > (i2c->msg->len - i2c->msg_ptr)) {
+			u32 int_en = readl(i2c->regs + HSI2C_INT_ENABLE);
+
+			int_en &= ~HSI2C_INT_TX_ALMOSTEMPTY_EN;
+			writel(int_en, i2c->regs + HSI2C_INT_ENABLE);
+			len = i2c->msg->len - i2c->msg_ptr;
+		}
+
+		while (len > 0) {
+			byte = i2c->msg->buf[i2c->msg_ptr++];
+			writel(byte, i2c->regs + HSI2C_TX_DATA);
+			len--;
+		}
+		i2c->state = 0;
+	}
+
+ stop:
+	if ((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
+	    (i2c->state < 0)) {
+		writel(0, i2c->regs + HSI2C_INT_ENABLE);
+		exynos5_i2c_clr_pend_irq(i2c);
+		complete(&i2c->msg_complete);
+	}
+
+	spin_unlock(&i2c->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * exynos5_i2c_wait_bus_idle
+ *
+ * Wait for the bus to go idle, indicated by the MASTER_BUSY bit being
+ * cleared.
+ *
+ * Returns -EBUSY if the bus cannot be bought to idle
+ */
+static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
+{
+	unsigned long stop_time;
+	u32 trans_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100) + 1;
+	do {
+		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+		if (!(trans_status & HSI2C_MASTER_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+/*
+ * exynos5_i2c_message_start: Configures the bus and starts the xfer
+ * i2c: struct exynos5_i2c pointer for the current bus
+ * stop: Enables stop after transfer if set. Set for last transfer of
+ *       in the list of messages.
+ *
+ * Configures the bus for read/write function
+ * Sets chip address to talk to, message length to be sent.
+ * Enables appropriate interrupts and sends start xfer command.
+ */
+static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
+{
+	u32 i2c_ctl;
+	u32 int_en = 0;
+	u32 i2c_auto_conf = 0;
+	u32 fifo_ctl;
+	unsigned long flags;
+	unsigned short trig_lvl;
+
+	if (i2c->variant->hw == HSI2C_EXYNOS7)
+		int_en |= HSI2C_INT_I2C_TRANS;
+	else
+		int_en |= HSI2C_INT_I2C;
+
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
+	fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
+
+	if (i2c->msg->flags & I2C_M_RD) {
+		i2c_ctl |= HSI2C_RXCHON;
+
+		i2c_auto_conf |= HSI2C_READ_WRITE;
+
+		trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+			(i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len;
+		fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(trig_lvl);
+
+		int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
+			HSI2C_INT_TRAILING_EN);
+	} else {
+		i2c_ctl |= HSI2C_TXCHON;
+
+		trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+			(i2c->variant->fifo_depth * 1 / 4) : i2c->msg->len;
+		fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(trig_lvl);
+
+		int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
+	}
+
+	writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR);
+
+	writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+	/*
+	 * Enable interrupts before starting the transfer so that we don't
+	 * miss any INT_I2C interrupts.
+	 */
+	spin_lock_irqsave(&i2c->lock, flags);
+	writel(int_en, i2c->regs + HSI2C_INT_ENABLE);
+
+	if (stop == 1)
+		i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS;
+	i2c_auto_conf |= i2c->msg->len;
+	i2c_auto_conf |= HSI2C_MASTER_RUN;
+	writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONF);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+}
+
+static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
+			      struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->msg_ptr = 0;
+	i2c->trans_done = 0;
+
+	reinit_completion(&i2c->msg_complete);
+
+	exynos5_i2c_message_start(i2c, stop);
+
+	timeout = wait_for_completion_timeout(&i2c->msg_complete,
+					      EXYNOS5_I2C_TIMEOUT);
+	if (timeout == 0)
+		ret = -ETIMEDOUT;
+	else
+		ret = i2c->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (ret == 0 && stop)
+		ret = exynos5_i2c_wait_bus_idle(i2c);
+
+	if (ret < 0) {
+		exynos5_i2c_reset(i2c);
+		if (ret == -ETIMEDOUT)
+			dev_warn(i2c->dev, "%s timeout\n",
+				 (msgs->flags & I2C_M_RD) ? "rx" : "tx");
+	}
+
+	/* Return the state as in interrupt routine */
+	return ret;
+}
+
+static int exynos5_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	struct exynos5_i2c *i2c = adap->algo_data;
+	int i = 0, ret = 0, stop = 0;
+
+	if (i2c->suspended) {
+		dev_err(i2c->dev, "HS-I2C is not initialized.\n");
+		return -EIO;
+	}
+
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+
+		ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
+
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(i2c->dev, "xfer message failed\n");
+	}
+
+ out:
+	clk_disable(i2c->clk);
+	return ret;
+}
+
+static u32 exynos5_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm exynos5_i2c_algorithm = {
+	.master_xfer		= exynos5_i2c_xfer,
+	.functionality		= exynos5_i2c_func,
+};
+
+static int exynos5_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct exynos5_i2c *i2c;
+	struct resource *mem;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock))
+		i2c->op_clock = HSI2C_FS_TX_CLOCK;
+
+	strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.algo    = &exynos5_i2c_algorithm;
+	i2c->adap.retries = 3;
+
+	i2c->dev = &pdev->dev;
+	i2c->clk = devm_clk_get(&pdev->dev, "hsi2c");
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return -ENOENT;
+	}
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		return ret;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c->regs)) {
+		ret = PTR_ERR(i2c->regs);
+		goto err_clk;
+	}
+
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+
+	/* Clear pending interrupts from u-boot or misc causes */
+	exynos5_i2c_clr_pend_irq(i2c);
+
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->msg_complete);
+
+	i2c->irq = ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
+				IRQF_NO_SUSPEND | IRQF_ONESHOT,
+				dev_name(&pdev->dev), i2c);
+
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
+		goto err_clk;
+	}
+
+	i2c->variant = of_device_get_match_data(&pdev->dev);
+
+	ret = exynos5_hsi2c_clock_setup(i2c);
+	if (ret)
+		goto err_clk;
+
+	exynos5_i2c_reset(i2c);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0)
+		goto err_clk;
+
+	platform_set_drvdata(pdev, i2c);
+
+	clk_disable(i2c->clk);
+
+	return 0;
+
+ err_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int exynos5_i2c_remove(struct platform_device *pdev)
+{
+	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	clk_unprepare(i2c->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos5_i2c_suspend_noirq(struct device *dev)
+{
+	struct exynos5_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->suspended = 1;
+
+	clk_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static int exynos5_i2c_resume_noirq(struct device *dev)
+{
+	struct exynos5_i2c *i2c = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		return ret;
+
+	ret = exynos5_hsi2c_clock_setup(i2c);
+	if (ret) {
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
+	exynos5_i2c_init(i2c);
+	clk_disable(i2c->clk);
+	i2c->suspended = 0;
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(exynos5_i2c_suspend_noirq,
+				      exynos5_i2c_resume_noirq)
+};
+
+static struct platform_driver exynos5_i2c_driver = {
+	.probe		= exynos5_i2c_probe,
+	.remove		= exynos5_i2c_remove,
+	.driver		= {
+		.name	= "exynos5-hsi2c",
+		.pm	= &exynos5_i2c_dev_pm_ops,
+		.of_match_table = exynos5_i2c_match,
+	},
+};
+
+module_platform_driver(exynos5_i2c_driver);
+
+MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
+MODULE_AUTHOR("Naveen Krishna Chatradhi, <ch.naveen@samsung.com>");
+MODULE_AUTHOR("Taekgyun Ko, <taeggyun.ko@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-gpio.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-gpio.c
new file mode 100644
index 0000000..0ef8fcc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-gpio.c
@@ -0,0 +1,290 @@
+/*
+ * Bitbanging I2C bus driver using the GPIO API
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+struct i2c_gpio_private_data {
+	struct i2c_adapter adap;
+	struct i2c_algo_bit_data bit_data;
+	struct i2c_gpio_platform_data pdata;
+};
+
+/* Toggle SDA by changing the direction of the pin */
+static void i2c_gpio_setsda_dir(void *data, int state)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	if (state)
+		gpio_direction_input(pdata->sda_pin);
+	else
+		gpio_direction_output(pdata->sda_pin, 0);
+}
+
+/*
+ * Toggle SDA by changing the output value of the pin. This is only
+ * valid for pins configured as open drain (i.e. setting the value
+ * high effectively turns off the output driver.)
+ */
+static void i2c_gpio_setsda_val(void *data, int state)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	gpio_set_value(pdata->sda_pin, state);
+}
+
+/* Toggle SCL by changing the direction of the pin. */
+static void i2c_gpio_setscl_dir(void *data, int state)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	if (state)
+		gpio_direction_input(pdata->scl_pin);
+	else
+		gpio_direction_output(pdata->scl_pin, 0);
+}
+
+/*
+ * Toggle SCL by changing the output value of the pin. This is used
+ * for pins that are configured as open drain and for output-only
+ * pins. The latter case will break the i2c protocol, but it will
+ * often work in practice.
+ */
+static void i2c_gpio_setscl_val(void *data, int state)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	gpio_set_value(pdata->scl_pin, state);
+}
+
+static int i2c_gpio_getsda(void *data)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	return gpio_get_value(pdata->sda_pin);
+}
+
+static int i2c_gpio_getscl(void *data)
+{
+	struct i2c_gpio_platform_data *pdata = data;
+
+	return gpio_get_value(pdata->scl_pin);
+}
+
+static int of_i2c_gpio_get_pins(struct device_node *np,
+				unsigned int *sda_pin, unsigned int *scl_pin)
+{
+	if (of_gpio_count(np) < 2)
+		return -ENODEV;
+
+	*sda_pin = of_get_gpio(np, 0);
+	*scl_pin = of_get_gpio(np, 1);
+
+	if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
+		pr_err("%pOF: invalid GPIO pins, sda=%d/scl=%d\n",
+		       np, *sda_pin, *scl_pin);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void of_i2c_gpio_get_props(struct device_node *np,
+				  struct i2c_gpio_platform_data *pdata)
+{
+	u32 reg;
+
+	of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay);
+
+	if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", &reg))
+		pdata->timeout = msecs_to_jiffies(reg);
+
+	pdata->sda_is_open_drain =
+		of_property_read_bool(np, "i2c-gpio,sda-open-drain");
+	pdata->scl_is_open_drain =
+		of_property_read_bool(np, "i2c-gpio,scl-open-drain");
+	pdata->scl_is_output_only =
+		of_property_read_bool(np, "i2c-gpio,scl-output-only");
+}
+
+static int i2c_gpio_probe(struct platform_device *pdev)
+{
+	struct i2c_gpio_private_data *priv;
+	struct i2c_gpio_platform_data *pdata;
+	struct i2c_algo_bit_data *bit_data;
+	struct i2c_adapter *adap;
+	unsigned int sda_pin, scl_pin;
+	int ret;
+
+	/* First get the GPIO pins; if it fails, we'll defer the probe. */
+	if (pdev->dev.of_node) {
+		ret = of_i2c_gpio_get_pins(pdev->dev.of_node,
+					   &sda_pin, &scl_pin);
+		if (ret)
+			return ret;
+	} else {
+		if (!dev_get_platdata(&pdev->dev))
+			return -ENXIO;
+		pdata = dev_get_platdata(&pdev->dev);
+		sda_pin = pdata->sda_pin;
+		scl_pin = pdata->scl_pin;
+	}
+
+	ret = devm_gpio_request(&pdev->dev, sda_pin, "sda");
+	if (ret) {
+		if (ret == -EINVAL)
+			ret = -EPROBE_DEFER;	/* Try again later */
+		return ret;
+	}
+	ret = devm_gpio_request(&pdev->dev, scl_pin, "scl");
+	if (ret) {
+		if (ret == -EINVAL)
+			ret = -EPROBE_DEFER;	/* Try again later */
+		return ret;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	adap = &priv->adap;
+	bit_data = &priv->bit_data;
+	pdata = &priv->pdata;
+
+	if (pdev->dev.of_node) {
+		pdata->sda_pin = sda_pin;
+		pdata->scl_pin = scl_pin;
+		of_i2c_gpio_get_props(pdev->dev.of_node, pdata);
+	} else {
+		memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
+	}
+
+	if (pdata->sda_is_open_drain) {
+		gpio_direction_output(pdata->sda_pin, 1);
+		bit_data->setsda = i2c_gpio_setsda_val;
+	} else {
+		gpio_direction_input(pdata->sda_pin);
+		bit_data->setsda = i2c_gpio_setsda_dir;
+	}
+
+	if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
+		gpio_direction_output(pdata->scl_pin, 1);
+		bit_data->setscl = i2c_gpio_setscl_val;
+	} else {
+		gpio_direction_input(pdata->scl_pin);
+		bit_data->setscl = i2c_gpio_setscl_dir;
+	}
+
+	if (!pdata->scl_is_output_only)
+		bit_data->getscl = i2c_gpio_getscl;
+	bit_data->getsda = i2c_gpio_getsda;
+
+	if (pdata->udelay)
+		bit_data->udelay = pdata->udelay;
+	else if (pdata->scl_is_output_only)
+		bit_data->udelay = 50;			/* 10 kHz */
+	else
+		bit_data->udelay = 5;			/* 100 kHz */
+
+	if (pdata->timeout)
+		bit_data->timeout = pdata->timeout;
+	else
+		bit_data->timeout = HZ / 10;		/* 100 ms */
+
+	bit_data->data = pdata;
+
+	adap->owner = THIS_MODULE;
+	if (pdev->dev.of_node)
+		strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
+	else
+		snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
+
+	adap->algo_data = bit_data;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	adap->nr = pdev->id;
+	ret = i2c_bit_add_numbered_bus(adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
+		 pdata->sda_pin, pdata->scl_pin,
+		 pdata->scl_is_output_only
+		 ? ", no clock stretching" : "");
+
+	return 0;
+}
+
+static int i2c_gpio_remove(struct platform_device *pdev)
+{
+	struct i2c_gpio_private_data *priv;
+	struct i2c_adapter *adap;
+
+	priv = platform_get_drvdata(pdev);
+	adap = &priv->adap;
+
+	i2c_del_adapter(adap);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id i2c_gpio_dt_ids[] = {
+	{ .compatible = "i2c-gpio", },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids);
+#endif
+
+static struct platform_driver i2c_gpio_driver = {
+	.driver		= {
+		.name	= "i2c-gpio",
+		.of_match_table	= of_match_ptr(i2c_gpio_dt_ids),
+	},
+	.probe		= i2c_gpio_probe,
+	.remove		= i2c_gpio_remove,
+};
+
+static int __init i2c_gpio_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&i2c_gpio_driver);
+	if (ret)
+		printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(i2c_gpio_init);
+
+static void __exit i2c_gpio_exit(void)
+{
+	platform_driver_unregister(&i2c_gpio_driver);
+}
+module_exit(i2c_gpio_exit);
+
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
+MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-gpio");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-highlander.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-highlander.c
new file mode 100644
index 0000000..56dc69e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-highlander.c
@@ -0,0 +1,481 @@
+/*
+ * Renesas Solutions Highlander FPGA I2C/SMBus support.
+ *
+ * Supported devices: R0P7780LC0011RL, R0P7785LC0011RL
+ *
+ * Copyright (C) 2008  Paul Mundt
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ * Copyright (C) 2008  Atom Create Engineering Co., Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License version 2. See the file "COPYING" in the main directory
+ * of this archive for more details.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#define SMCR		0x00
+#define SMCR_START	(1 << 0)
+#define SMCR_IRIC	(1 << 1)
+#define SMCR_BBSY	(1 << 2)
+#define SMCR_ACKE	(1 << 3)
+#define SMCR_RST	(1 << 4)
+#define SMCR_IEIC	(1 << 6)
+
+#define SMSMADR		0x02
+
+#define SMMR		0x04
+#define SMMR_MODE0	(1 << 0)
+#define SMMR_MODE1	(1 << 1)
+#define SMMR_CAP	(1 << 3)
+#define SMMR_TMMD	(1 << 4)
+#define SMMR_SP		(1 << 7)
+
+#define SMSADR		0x06
+#define SMTRDR		0x46
+
+struct highlander_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	struct i2c_adapter	adapter;
+	struct completion	cmd_complete;
+	unsigned long		last_read_time;
+	int			irq;
+	u8			*buf;
+	size_t			buf_len;
+};
+
+static bool iic_force_poll, iic_force_normal;
+static int iic_timeout = 1000, iic_read_delay;
+
+static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev)
+{
+	iowrite16(ioread16(dev->base + SMCR) | SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_irq_disable(struct highlander_i2c_dev *dev)
+{
+	iowrite16(ioread16(dev->base + SMCR) & ~SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_start(struct highlander_i2c_dev *dev)
+{
+	iowrite16(ioread16(dev->base + SMCR) | SMCR_START, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_done(struct highlander_i2c_dev *dev)
+{
+	iowrite16(ioread16(dev->base + SMCR) | SMCR_IRIC, dev->base + SMCR);
+}
+
+static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
+{
+	u16 smmr;
+
+	smmr = ioread16(dev->base + SMMR);
+	smmr |= SMMR_TMMD;
+
+	if (iic_force_normal)
+		smmr &= ~SMMR_SP;
+	else
+		smmr |= SMMR_SP;
+
+	iowrite16(smmr, dev->base + SMMR);
+}
+
+static void smbus_write_data(u8 *src, u16 *dst, int len)
+{
+	for (; len > 1; len -= 2) {
+		*dst++ = be16_to_cpup((__be16 *)src);
+		src += 2;
+	}
+
+	if (len)
+		*dst = *src << 8;
+}
+
+static void smbus_read_data(u16 *src, u8 *dst, int len)
+{
+	for (; len > 1; len -= 2) {
+		*(__be16 *)dst = cpu_to_be16p(src++);
+		dst += 2;
+	}
+
+	if (len)
+		*dst = *src >> 8;
+}
+
+static void highlander_i2c_command(struct highlander_i2c_dev *dev,
+				   u8 command, int len)
+{
+	unsigned int i;
+	u16 cmd = (command << 8) | command;
+
+	for (i = 0; i < len; i += 2) {
+		if (len - i == 1)
+			cmd = command << 8;
+		iowrite16(cmd, dev->base + SMSADR + i);
+		dev_dbg(dev->dev, "command data[%x] 0x%04x\n", i/2, cmd);
+	}
+}
+
+static int highlander_i2c_wait_for_bbsy(struct highlander_i2c_dev *dev)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(iic_timeout);
+	while (ioread16(dev->base + SMCR) & SMCR_BBSY) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(dev->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+
+		msleep(1);
+	}
+
+	return 0;
+}
+
+static int highlander_i2c_reset(struct highlander_i2c_dev *dev)
+{
+	iowrite16(ioread16(dev->base + SMCR) | SMCR_RST, dev->base + SMCR);
+	return highlander_i2c_wait_for_bbsy(dev);
+}
+
+static int highlander_i2c_wait_for_ack(struct highlander_i2c_dev *dev)
+{
+	u16 tmp = ioread16(dev->base + SMCR);
+
+	if ((tmp & (SMCR_IRIC | SMCR_ACKE)) == SMCR_ACKE) {
+		dev_warn(dev->dev, "ack abnormality\n");
+		return highlander_i2c_reset(dev);
+	}
+
+	return 0;
+}
+
+static irqreturn_t highlander_i2c_irq(int irq, void *dev_id)
+{
+	struct highlander_i2c_dev *dev = dev_id;
+
+	highlander_i2c_done(dev);
+	complete(&dev->cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+static void highlander_i2c_poll(struct highlander_i2c_dev *dev)
+{
+	unsigned long timeout;
+	u16 smcr;
+
+	timeout = jiffies + msecs_to_jiffies(iic_timeout);
+	for (;;) {
+		smcr = ioread16(dev->base + SMCR);
+
+		/*
+		 * Don't bother checking ACKE here, this and the reset
+		 * are handled in highlander_i2c_wait_xfer_done() when
+		 * waiting for the ACK.
+		 */
+
+		if (smcr & SMCR_IRIC)
+			return;
+		if (time_after(jiffies, timeout))
+			break;
+
+		cpu_relax();
+		cond_resched();
+	}
+
+	dev_err(dev->dev, "polling timed out\n");
+}
+
+static inline int highlander_i2c_wait_xfer_done(struct highlander_i2c_dev *dev)
+{
+	if (dev->irq)
+		wait_for_completion_timeout(&dev->cmd_complete,
+					  msecs_to_jiffies(iic_timeout));
+	else
+		/* busy looping, the IRQ of champions */
+		highlander_i2c_poll(dev);
+
+	return highlander_i2c_wait_for_ack(dev);
+}
+
+static int highlander_i2c_read(struct highlander_i2c_dev *dev)
+{
+	int i, cnt;
+	u16 data[16];
+
+	if (highlander_i2c_wait_for_bbsy(dev))
+		return -EAGAIN;
+
+	highlander_i2c_start(dev);
+
+	if (highlander_i2c_wait_xfer_done(dev)) {
+		dev_err(dev->dev, "Arbitration loss\n");
+		return -EAGAIN;
+	}
+
+	/*
+	 * The R0P7780LC0011RL FPGA needs a significant delay between
+	 * data read cycles, otherwise the transceiver gets confused and
+	 * garbage is returned when the read is subsequently aborted.
+	 *
+	 * It is not sufficient to wait for BBSY.
+	 *
+	 * While this generally only applies to the older SH7780-based
+	 * Highlanders, the same issue can be observed on SH7785 ones,
+	 * albeit less frequently. SH7780-based Highlanders may need
+	 * this to be as high as 1000 ms.
+	 */
+	if (iic_read_delay && time_before(jiffies, dev->last_read_time +
+				 msecs_to_jiffies(iic_read_delay)))
+		msleep(jiffies_to_msecs((dev->last_read_time +
+				msecs_to_jiffies(iic_read_delay)) - jiffies));
+
+	cnt = (dev->buf_len + 1) >> 1;
+	for (i = 0; i < cnt; i++) {
+		data[i] = ioread16(dev->base + SMTRDR + (i * sizeof(u16)));
+		dev_dbg(dev->dev, "read data[%x] 0x%04x\n", i, data[i]);
+	}
+
+	smbus_read_data(data, dev->buf, dev->buf_len);
+
+	dev->last_read_time = jiffies;
+
+	return 0;
+}
+
+static int highlander_i2c_write(struct highlander_i2c_dev *dev)
+{
+	int i, cnt;
+	u16 data[16];
+
+	smbus_write_data(dev->buf, data, dev->buf_len);
+
+	cnt = (dev->buf_len + 1) >> 1;
+	for (i = 0; i < cnt; i++) {
+		iowrite16(data[i], dev->base + SMTRDR + (i * sizeof(u16)));
+		dev_dbg(dev->dev, "write data[%x] 0x%04x\n", i, data[i]);
+	}
+
+	if (highlander_i2c_wait_for_bbsy(dev))
+		return -EAGAIN;
+
+	highlander_i2c_start(dev);
+
+	return highlander_i2c_wait_xfer_done(dev);
+}
+
+static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+				  unsigned short flags, char read_write,
+				  u8 command, int size,
+				  union i2c_smbus_data *data)
+{
+	struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
+	u16 tmp;
+
+	init_completion(&dev->cmd_complete);
+
+	dev_dbg(dev->dev, "addr %04x, command %02x, read_write %d, size %d\n",
+		addr, command, read_write, size);
+
+	/*
+	 * Set up the buffer and transfer size
+	 */
+	switch (size) {
+	case I2C_SMBUS_BYTE_DATA:
+		dev->buf = &data->byte;
+		dev->buf_len = 1;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		dev->buf = &data->block[1];
+		dev->buf_len = data->block[0];
+		break;
+	default:
+		dev_err(dev->dev, "unsupported command %d\n", size);
+		return -EINVAL;
+	}
+
+	/*
+	 * Encode the mode setting
+	 */
+	tmp = ioread16(dev->base + SMMR);
+	tmp &= ~(SMMR_MODE0 | SMMR_MODE1);
+
+	switch (dev->buf_len) {
+	case 1:
+		/* default */
+		break;
+	case 8:
+		tmp |= SMMR_MODE0;
+		break;
+	case 16:
+		tmp |= SMMR_MODE1;
+		break;
+	case 32:
+		tmp |= (SMMR_MODE0 | SMMR_MODE1);
+		break;
+	default:
+		dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len);
+		return -EINVAL;
+	}
+
+	iowrite16(tmp, dev->base + SMMR);
+
+	/* Ensure we're in a sane state */
+	highlander_i2c_done(dev);
+
+	/* Set slave address */
+	iowrite16((addr << 1) | read_write, dev->base + SMSMADR);
+
+	highlander_i2c_command(dev, command, dev->buf_len);
+
+	if (read_write == I2C_SMBUS_READ)
+		return highlander_i2c_read(dev);
+	else
+		return highlander_i2c_write(dev);
+}
+
+static u32 highlander_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm highlander_i2c_algo = {
+	.smbus_xfer	= highlander_i2c_smbus_xfer,
+	.functionality	= highlander_i2c_func,
+};
+
+static int highlander_i2c_probe(struct platform_device *pdev)
+{
+	struct highlander_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "no mem resource\n");
+		return -ENODEV;
+	}
+
+	dev = kzalloc(sizeof(struct highlander_i2c_dev), GFP_KERNEL);
+	if (unlikely(!dev))
+		return -ENOMEM;
+
+	dev->base = ioremap_nocache(res->start, resource_size(res));
+	if (unlikely(!dev->base)) {
+		ret = -ENXIO;
+		goto err;
+	}
+
+	dev->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dev);
+
+	dev->irq = platform_get_irq(pdev, 0);
+	if (iic_force_poll)
+		dev->irq = 0;
+
+	if (dev->irq) {
+		ret = request_irq(dev->irq, highlander_i2c_irq, 0,
+				  pdev->name, dev);
+		if (unlikely(ret))
+			goto err_unmap;
+
+		highlander_i2c_irq_enable(dev);
+	} else {
+		dev_notice(&pdev->dev, "no IRQ, using polling mode\n");
+		highlander_i2c_irq_disable(dev);
+	}
+
+	dev->last_read_time = jiffies;	/* initial read jiffies */
+
+	highlander_i2c_setup(dev);
+
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON;
+	strlcpy(adap->name, "HL FPGA I2C adapter", sizeof(adap->name));
+	adap->algo = &highlander_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->nr = pdev->id;
+
+	/*
+	 * Reset the adapter
+	 */
+	ret = highlander_i2c_reset(dev);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev, "controller didn't come up\n");
+		goto err_free_irq;
+	}
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev, "failure adding adapter\n");
+		goto err_free_irq;
+	}
+
+	return 0;
+
+err_free_irq:
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+err_unmap:
+	iounmap(dev->base);
+err:
+	kfree(dev);
+
+	return ret;
+}
+
+static int highlander_i2c_remove(struct platform_device *pdev)
+{
+	struct highlander_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+
+	iounmap(dev->base);
+	kfree(dev);
+
+	return 0;
+}
+
+static struct platform_driver highlander_i2c_driver = {
+	.driver		= {
+		.name	= "i2c-highlander",
+	},
+
+	.probe		= highlander_i2c_probe,
+	.remove		= highlander_i2c_remove,
+};
+
+module_platform_driver(highlander_i2c_driver);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("Renesas Highlander FPGA I2C/SMBus adapter");
+MODULE_LICENSE("GPL v2");
+
+module_param(iic_force_poll, bool, 0);
+module_param(iic_force_normal, bool, 0);
+module_param(iic_timeout, int, 0);
+module_param(iic_read_delay, int, 0);
+
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+MODULE_PARM_DESC(iic_force_normal,
+		 "Force normal mode (100 kHz), default is fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_timeout, "Set timeout value in msecs (default 1000 ms)");
+MODULE_PARM_DESC(iic_read_delay,
+		 "Delay between data read cycles (default 0 ms)");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hix5hd2.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hix5hd2.c
new file mode 100644
index 0000000..aa5c55b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hix5hd2.c
@@ -0,0 +1,554 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Now only support 7 bit address.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Register Map */
+#define HIX5I2C_CTRL		0x00
+#define HIX5I2C_COM		0x04
+#define HIX5I2C_ICR		0x08
+#define HIX5I2C_SR		0x0c
+#define HIX5I2C_SCL_H		0x10
+#define HIX5I2C_SCL_L		0x14
+#define HIX5I2C_TXR		0x18
+#define HIX5I2C_RXR		0x1c
+
+/* I2C_CTRL_REG */
+#define I2C_ENABLE		BIT(8)
+#define I2C_UNMASK_TOTAL	BIT(7)
+#define I2C_UNMASK_START	BIT(6)
+#define I2C_UNMASK_END		BIT(5)
+#define I2C_UNMASK_SEND		BIT(4)
+#define I2C_UNMASK_RECEIVE	BIT(3)
+#define I2C_UNMASK_ACK		BIT(2)
+#define I2C_UNMASK_ARBITRATE	BIT(1)
+#define I2C_UNMASK_OVER		BIT(0)
+#define I2C_UNMASK_ALL		(I2C_UNMASK_ACK | I2C_UNMASK_OVER)
+
+/* I2C_COM_REG */
+#define I2C_NO_ACK		BIT(4)
+#define I2C_START		BIT(3)
+#define I2C_READ		BIT(2)
+#define I2C_WRITE		BIT(1)
+#define I2C_STOP		BIT(0)
+
+/* I2C_ICR_REG */
+#define I2C_CLEAR_START		BIT(6)
+#define I2C_CLEAR_END		BIT(5)
+#define I2C_CLEAR_SEND		BIT(4)
+#define I2C_CLEAR_RECEIVE	BIT(3)
+#define I2C_CLEAR_ACK		BIT(2)
+#define I2C_CLEAR_ARBITRATE	BIT(1)
+#define I2C_CLEAR_OVER		BIT(0)
+#define I2C_CLEAR_ALL		(I2C_CLEAR_START | I2C_CLEAR_END | \
+				I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \
+				I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \
+				I2C_CLEAR_OVER)
+
+/* I2C_SR_REG */
+#define I2C_BUSY		BIT(7)
+#define I2C_START_INTR		BIT(6)
+#define I2C_END_INTR		BIT(5)
+#define I2C_SEND_INTR		BIT(4)
+#define I2C_RECEIVE_INTR	BIT(3)
+#define I2C_ACK_INTR		BIT(2)
+#define I2C_ARBITRATE_INTR	BIT(1)
+#define I2C_OVER_INTR		BIT(0)
+
+#define HIX5I2C_MAX_FREQ	400000		/* 400k */
+#define HIX5I2C_READ_OPERATION	0x01
+
+enum hix5hd2_i2c_state {
+	HIX5I2C_STAT_RW_ERR = -1,
+	HIX5I2C_STAT_INIT,
+	HIX5I2C_STAT_RW,
+	HIX5I2C_STAT_SND_STOP,
+	HIX5I2C_STAT_RW_SUCCESS,
+};
+
+struct hix5hd2_i2c_priv {
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	struct completion msg_complete;
+	unsigned int msg_idx;
+	unsigned int msg_len;
+	int stop;
+	void __iomem *regs;
+	struct clk *clk;
+	struct device *dev;
+	spinlock_t lock;	/* IRQ synchronization */
+	int err;
+	unsigned int freq;
+	enum hix5hd2_i2c_state state;
+};
+
+static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv)
+{
+	u32 val = readl_relaxed(priv->regs + HIX5I2C_SR);
+
+	writel_relaxed(val, priv->regs + HIX5I2C_ICR);
+
+	return val;
+}
+
+static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR);
+}
+
+static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(0, priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL,
+		       priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv)
+{
+	u32 rate, val;
+	u32 scl, sysclock;
+
+	/* close all i2c interrupt */
+	val = readl_relaxed(priv->regs + HIX5I2C_CTRL);
+	writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL);
+
+	rate = priv->freq;
+	sysclock = clk_get_rate(priv->clk);
+	scl = (sysclock / (rate * 2)) / 2 - 1;
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H);
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L);
+
+	/* restore original interrupt*/
+	writel_relaxed(val, priv->regs + HIX5I2C_CTRL);
+
+	dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n",
+		__func__, sysclock, rate, scl);
+}
+
+static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv)
+{
+	hix5hd2_i2c_disable_irq(priv);
+	hix5hd2_i2c_drv_setrate(priv);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+}
+
+static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+	msleep(20);
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+}
+
+static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv)
+{
+	unsigned long stop_time;
+	u32 int_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100);
+	do {
+		int_status = hix5hd2_i2c_clr_pend_irq(priv);
+		if (!(int_status & I2C_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->state == HIX5I2C_STAT_SND_STOP)
+		dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__);
+	else
+		dev_dbg(priv->dev, "%s: have not data to send\n", __func__);
+
+	priv->state = HIX5I2C_STAT_RW_SUCCESS;
+	priv->err = 0;
+}
+
+static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->stop) {
+		priv->state = HIX5I2C_STAT_SND_STOP;
+		writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_over(priv);
+	}
+}
+
+static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->msg_len == 1) {
+		/* the last byte don't need send ACK */
+		writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM);
+	} else if (priv->msg_len > 1) {
+		/* if i2c master receive data will send ACK */
+		writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->msg_len > 0) {
+		data = priv->msg->buf[priv->msg_idx++];
+		writel_relaxed(data, priv->regs + HIX5I2C_TXR);
+		writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->state == HIX5I2C_STAT_INIT) {
+		priv->state = HIX5I2C_STAT_RW;
+	} else if (priv->state == HIX5I2C_STAT_RW) {
+		if (priv->msg->flags & I2C_M_RD) {
+			data = readl_relaxed(priv->regs + HIX5I2C_RXR);
+			priv->msg->buf[priv->msg_idx++] = data;
+		}
+		priv->msg_len--;
+	} else {
+		dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n",
+			__func__, priv->state, priv->msg_len);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id)
+{
+	struct hix5hd2_i2c_priv *priv = dev_id;
+	u32 int_status;
+	int ret;
+
+	spin_lock(&priv->lock);
+
+	int_status = hix5hd2_i2c_clr_pend_irq(priv);
+
+	/* handle error */
+	if (int_status & I2C_ARBITRATE_INTR) {
+		/* bus error */
+		dev_dbg(priv->dev, "ARB bus loss\n");
+		priv->err = -EAGAIN;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	} else if (int_status & I2C_ACK_INTR) {
+		/* ack error */
+		dev_dbg(priv->dev, "No ACK from device\n");
+		priv->err = -ENXIO;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	}
+
+	if (int_status & I2C_OVER_INTR) {
+		if (priv->msg_len > 0) {
+			ret = hix5hd2_rw_preprocess(priv);
+			if (ret) {
+				priv->err = ret;
+				priv->state = HIX5I2C_STAT_RW_ERR;
+				goto stop;
+			}
+			if (priv->msg->flags & I2C_M_RD)
+				hix5hd2_read_handle(priv);
+			else
+				hix5hd2_write_handle(priv);
+		} else {
+			hix5hd2_rw_over(priv);
+		}
+	}
+
+stop:
+	if ((priv->state == HIX5I2C_STAT_RW_SUCCESS &&
+	     priv->msg->len == priv->msg_idx) ||
+	    (priv->state == HIX5I2C_STAT_RW_ERR)) {
+		hix5hd2_i2c_disable_irq(priv);
+		hix5hd2_i2c_clr_pend_irq(priv);
+		complete(&priv->msg_complete);
+	}
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+
+	if (priv->msg->flags & I2C_M_RD)
+		writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
+			       priv->regs + HIX5I2C_TXR);
+	else
+		writel_relaxed(priv->msg->addr << 1,
+			       priv->regs + HIX5I2C_TXR);
+
+	writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
+				struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	priv->msg = msgs;
+	priv->msg_idx = 0;
+	priv->msg_len = priv->msg->len;
+	priv->stop = stop;
+	priv->err = 0;
+	priv->state = HIX5I2C_STAT_INIT;
+
+	reinit_completion(&priv->msg_complete);
+	hix5hd2_i2c_message_start(priv, stop);
+
+	timeout = wait_for_completion_timeout(&priv->msg_complete,
+					      priv->adap.timeout);
+	if (timeout == 0) {
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		priv->err = -ETIMEDOUT;
+		dev_warn(priv->dev, "%s timeout=%d\n",
+			 msgs->flags & I2C_M_RD ? "rx" : "tx",
+			 priv->adap.timeout);
+	}
+	ret = priv->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
+		ret = hix5hd2_i2c_wait_bus_idle(priv);
+
+	if (ret < 0)
+		hix5hd2_i2c_reset(priv);
+
+	return priv->err;
+}
+
+static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap);
+	int i, ret, stop;
+
+	pm_runtime_get_sync(priv->dev);
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+		ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(priv->dev, "xfer message failed\n");
+	}
+
+out:
+	pm_runtime_mark_last_busy(priv->dev);
+	pm_runtime_put_autosuspend(priv->dev);
+	return ret;
+}
+
+static u32 hix5hd2_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm hix5hd2_i2c_algorithm = {
+	.master_xfer		= hix5hd2_i2c_xfer,
+	.functionality		= hix5hd2_i2c_func,
+};
+
+static int hix5hd2_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct hix5hd2_i2c_priv *priv;
+	struct resource *mem;
+	unsigned int freq;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		/* use 100k as default value */
+		priv->freq = 100000;
+	} else {
+		if (freq > HIX5I2C_MAX_FREQ) {
+			priv->freq = HIX5I2C_MAX_FREQ;
+			dev_warn(priv->dev, "use max freq %d instead\n",
+				 HIX5I2C_MAX_FREQ);
+		} else {
+			priv->freq = freq;
+		}
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		return irq;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+
+	strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name));
+	priv->dev = &pdev->dev;
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &hix5hd2_i2c_algorithm;
+	priv->adap.retries = 3;
+	priv->adap.dev.of_node = np;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &pdev->dev;
+	i2c_set_adapdata(&priv->adap, priv);
+	platform_set_drvdata(pdev, priv);
+	spin_lock_init(&priv->lock);
+	init_completion(&priv->msg_complete);
+
+	hix5hd2_i2c_init(priv);
+
+	ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq,
+			       IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			       dev_name(&pdev->dev), priv);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
+		goto err_clk;
+	}
+
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(priv->dev);
+	pm_runtime_set_active(priv->dev);
+	pm_runtime_enable(priv->dev);
+
+	ret = i2c_add_adapter(&priv->adap);
+	if (ret < 0)
+		goto err_runtime;
+
+	return ret;
+
+err_runtime:
+	pm_runtime_disable(priv->dev);
+	pm_runtime_set_suspended(priv->dev);
+err_clk:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int hix5hd2_i2c_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	pm_runtime_disable(priv->dev);
+	pm_runtime_set_suspended(priv->dev);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int hix5hd2_i2c_runtime_suspend(struct device *dev)
+{
+	struct hix5hd2_i2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int hix5hd2_i2c_runtime_resume(struct device *dev)
+{
+	struct hix5hd2_i2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
+	SET_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+			      hix5hd2_i2c_runtime_resume,
+			      NULL)
+};
+
+static const struct of_device_id hix5hd2_i2c_match[] = {
+	{ .compatible = "hisilicon,hix5hd2-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match);
+
+static struct platform_driver hix5hd2_i2c_driver = {
+	.probe		= hix5hd2_i2c_probe,
+	.remove		= hix5hd2_i2c_remove,
+	.driver		= {
+		.name	= "hix5hd2-i2c",
+		.pm	= &hix5hd2_i2c_pm_ops,
+		.of_match_table = hix5hd2_i2c_match,
+	},
+};
+
+module_platform_driver(hix5hd2_i2c_driver);
+
+MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
+MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:hix5hd2-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hydra.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hydra.c
new file mode 100644
index 0000000..b7864cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-hydra.c
@@ -0,0 +1,158 @@
+/*
+    i2c Support for the Apple `Hydra' Mac I/O
+
+    Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org>
+
+    Based on i2c Support for Via Technologies 82C586B South Bridge
+    Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
+#include <asm/hydra.h>
+
+
+#define HYDRA_CPD_PD0	0x00000001	/* CachePD lines */
+#define HYDRA_CPD_PD1	0x00000002
+#define HYDRA_CPD_PD2	0x00000004
+#define HYDRA_CPD_PD3	0x00000008
+
+#define HYDRA_SCLK	HYDRA_CPD_PD0
+#define HYDRA_SDAT	HYDRA_CPD_PD1
+#define HYDRA_SCLK_OE	0x00000010
+#define HYDRA_SDAT_OE	0x00000020
+
+static inline void pdregw(void *data, u32 val)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	writel(val, &hydra->CachePD);
+}
+
+static inline u32 pdregr(void *data)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	return readl(&hydra->CachePD);
+}
+
+static void hydra_bit_setscl(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SCLK_OE;
+	else {
+		val &= ~HYDRA_SCLK;
+		val |= HYDRA_SCLK_OE;
+	}
+	pdregw(data, val);
+}
+
+static void hydra_bit_setsda(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SDAT_OE;
+	else {
+		val &= ~HYDRA_SDAT;
+		val |= HYDRA_SDAT_OE;
+	}
+	pdregw(data, val);
+}
+
+static int hydra_bit_getscl(void *data)
+{
+	return (pdregr(data) & HYDRA_SCLK) != 0;
+}
+
+static int hydra_bit_getsda(void *data)
+{
+	return (pdregr(data) & HYDRA_SDAT) != 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct i2c_algo_bit_data hydra_bit_data = {
+	.setsda		= hydra_bit_setsda,
+	.setscl		= hydra_bit_setscl,
+	.getsda		= hydra_bit_getsda,
+	.getscl		= hydra_bit_getscl,
+	.udelay		= 5,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter hydra_adap = {
+	.owner		= THIS_MODULE,
+	.name		= "Hydra i2c",
+	.algo_data	= &hydra_bit_data,
+};
+
+static const struct pci_device_id hydra_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, hydra_ids);
+
+static int hydra_probe(struct pci_dev *dev,
+				 const struct pci_device_id *id)
+{
+	unsigned long base = pci_resource_start(dev, 0);
+	int res;
+
+	if (!request_mem_region(base+offsetof(struct Hydra, CachePD), 4,
+				hydra_adap.name))
+		return -EBUSY;
+
+	hydra_bit_data.data = pci_ioremap_bar(dev, 0);
+	if (hydra_bit_data.data == NULL) {
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return -ENODEV;
+	}
+
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	hydra_adap.dev.parent = &dev->dev;
+	res = i2c_bit_add_bus(&hydra_adap);
+	if (res < 0) {
+		iounmap(hydra_bit_data.data);
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return res;
+	}
+	return 0;
+}
+
+static void hydra_remove(struct pci_dev *dev)
+{
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	i2c_del_adapter(&hydra_adap);
+	iounmap(hydra_bit_data.data);
+	release_mem_region(pci_resource_start(dev, 0)+
+			   offsetof(struct Hydra, CachePD), 4);
+}
+
+
+static struct pci_driver hydra_driver = {
+	.name		= "hydra_smbus",
+	.id_table	= hydra_ids,
+	.probe		= hydra_probe,
+	.remove		= hydra_remove,
+};
+
+module_pci_driver(hydra_driver);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-i801.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 0000000..21cf2b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,1783 @@
+/*
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+    <mdsxyz123@yahoo.com>
+    Copyright (C) 2007 - 2014  Jean Delvare <jdelvare@suse.de>
+    Copyright (C) 2010         Intel Corporation,
+                               David Woodhouse <dwmw2@infradead.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ *					I/O			Block	I2C
+ *					region	SMBus	Block	proc.	block
+ * Chip name			PCI ID	size	PEC	buffer	call	read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH)		0x2413	16	no	no	no	no
+ * 82801AB (ICH0)		0x2423	16	no	no	no	no
+ * 82801BA (ICH2)		0x2443	16	no	no	no	no
+ * 82801CA (ICH3)		0x2483	32	soft	no	no	no
+ * 82801DB (ICH4)		0x24c3	32	hard	yes	no	no
+ * 82801E (ICH5)		0x24d3	32	hard	yes	yes	yes
+ * 6300ESB			0x25a4	32	hard	yes	yes	yes
+ * 82801F (ICH6)		0x266a	32	hard	yes	yes	yes
+ * 6310ESB/6320ESB		0x269b	32	hard	yes	yes	yes
+ * 82801G (ICH7)		0x27da	32	hard	yes	yes	yes
+ * 82801H (ICH8)		0x283e	32	hard	yes	yes	yes
+ * 82801I (ICH9)		0x2930	32	hard	yes	yes	yes
+ * EP80579 (Tolapai)		0x5032	32	hard	yes	yes	yes
+ * ICH10			0x3a30	32	hard	yes	yes	yes
+ * ICH10			0x3a60	32	hard	yes	yes	yes
+ * 5/3400 Series (PCH)		0x3b30	32	hard	yes	yes	yes
+ * 6 Series (PCH)		0x1c22	32	hard	yes	yes	yes
+ * Patsburg (PCH)		0x1d22	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d70	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d71	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d72	32	hard	yes	yes	yes
+ * DH89xxCC (PCH)		0x2330	32	hard	yes	yes	yes
+ * Panther Point (PCH)		0x1e22	32	hard	yes	yes	yes
+ * Lynx Point (PCH)		0x8c22	32	hard	yes	yes	yes
+ * Lynx Point-LP (PCH)		0x9c22	32	hard	yes	yes	yes
+ * Avoton (SOC)			0x1f3c	32	hard	yes	yes	yes
+ * Wellsburg (PCH)		0x8d22	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7d	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7e	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7f	32	hard	yes	yes	yes
+ * Coleto Creek (PCH)		0x23b0	32	hard	yes	yes	yes
+ * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
+ * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
+ * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
+ * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
+ * DNV (SOC)			0x19df	32	hard	yes	yes	yes
+ * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
+ * Kaby Lake PCH-H (PCH)	0xa2a3	32	hard	yes	yes	yes
+ * Gemini Lake (SOC)		0x31d4	32	hard	yes	yes	yes
+ * Cannon Lake-H (PCH)		0xa323	32	hard	yes	yes	yes
+ * Cannon Lake-LP (PCH)		0x9da3	32	hard	yes	yes	yes
+ * Cedar Fork (PCH)		0x18df	32	hard	yes	yes	yes
+ *
+ * Features supported by this driver:
+ * Software PEC				no
+ * Hardware PEC				yes
+ * Block buffer				yes
+ * Block process call transaction	no
+ * I2C block read transaction		yes (doesn't use the block buffer)
+ * Slave mode				no
+ * SMBus Host Notify			yes
+ * Interrupt processing			yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
+#include <linux/pm_runtime.h>
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#include <linux/gpio.h>
+#include <linux/i2c-mux-gpio.h>
+#endif
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p)	(0 + (p)->smba)
+#define SMBHSTCNT(p)	(2 + (p)->smba)
+#define SMBHSTCMD(p)	(3 + (p)->smba)
+#define SMBHSTADD(p)	(4 + (p)->smba)
+#define SMBHSTDAT0(p)	(5 + (p)->smba)
+#define SMBHSTDAT1(p)	(6 + (p)->smba)
+#define SMBBLKDAT(p)	(7 + (p)->smba)
+#define SMBPEC(p)	(8 + (p)->smba)		/* ICH3 and later */
+#define SMBAUXSTS(p)	(12 + (p)->smba)	/* ICH4 and later */
+#define SMBAUXCTL(p)	(13 + (p)->smba)	/* ICH4 and later */
+#define SMBSLVSTS(p)	(16 + (p)->smba)	/* ICH3 and later */
+#define SMBSLVCMD(p)	(17 + (p)->smba)	/* ICH3 and later */
+#define SMBNTFDADD(p)	(20 + (p)->smba)	/* ICH3 and later */
+
+/* PCI Address Constants */
+#define SMBBAR		4
+#define SMBPCICTL	0x004
+#define SMBPCISTS	0x006
+#define SMBHSTCFG	0x040
+#define TCOBASE		0x050
+#define TCOCTL		0x054
+
+#define ACPIBASE		0x040
+#define ACPIBASE_SMI_OFF	0x030
+#define ACPICTRL		0x044
+#define ACPICTRL_EN		0x080
+
+#define SBREG_BAR		0x10
+#define SBREG_SMBCTRL		0xc6000c
+#define SBREG_SMBCTRL_DNV	0xcf000c
+
+/* Host status bits for SMBPCISTS */
+#define SMBPCISTS_INTS		BIT(3)
+
+/* Control bits for SMBPCICTL */
+#define SMBPCICTL_INTDIS	BIT(10)
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN	BIT(0)
+#define SMBHSTCFG_SMB_SMI_EN	BIT(1)
+#define SMBHSTCFG_I2C_EN	BIT(2)
+#define SMBHSTCFG_SPD_WD	BIT(4)
+
+/* TCO configuration bits for TCOCTL */
+#define TCOCTL_EN		BIT(8)
+
+/* Auxiliary status register bits, ICH4+ only */
+#define SMBAUXSTS_CRCE		BIT(0)
+#define SMBAUXSTS_STCO		BIT(1)
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC		BIT(0)
+#define SMBAUXCTL_E32B		BIT(1)
+
+/* Other settings */
+#define MAX_RETRIES		400
+
+/* I801 command constants */
+#define I801_QUICK		0x00
+#define I801_BYTE		0x04
+#define I801_BYTE_DATA		0x08
+#define I801_WORD_DATA		0x0C
+#define I801_PROC_CALL		0x10	/* unimplemented */
+#define I801_BLOCK_DATA		0x14
+#define I801_I2C_BLOCK_DATA	0x18	/* ICH5 and later */
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN	BIT(0)
+#define SMBHSTCNT_KILL		BIT(1)
+#define SMBHSTCNT_LAST_BYTE	BIT(5)
+#define SMBHSTCNT_START		BIT(6)
+#define SMBHSTCNT_PEC_EN	BIT(7)	/* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE	BIT(7)
+#define SMBHSTSTS_INUSE_STS	BIT(6)
+#define SMBHSTSTS_SMBALERT_STS	BIT(5)
+#define SMBHSTSTS_FAILED	BIT(4)
+#define SMBHSTSTS_BUS_ERR	BIT(3)
+#define SMBHSTSTS_DEV_ERR	BIT(2)
+#define SMBHSTSTS_INTR		BIT(1)
+#define SMBHSTSTS_HOST_BUSY	BIT(0)
+
+/* Host Notify Status register bits */
+#define SMBSLVSTS_HST_NTFY_STS	BIT(0)
+
+/* Host Notify Command register bits */
+#define SMBSLVCMD_HST_NTFY_INTREN	BIT(0)
+
+#define STATUS_ERROR_FLAGS	(SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+				 SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+				 STATUS_ERROR_FLAGS)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
+#define PCI_DEVICE_ID_INTEL_CDF_SMBUS			0x18df
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0		0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1		0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2		0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS		0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS		0x1f3c
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS		0x2292
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS		0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS		0x23b0
+#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS		0x31d4
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0		0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1		0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS		0x9da3
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
+#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS		0xa323
+
+struct i801_mux_config {
+	char *gpio_chip;
+	unsigned values[3];
+	int n_values;
+	unsigned classes[3];
+	unsigned gpios[2];		/* Relative to gpio_chip->base */
+	int n_gpios;
+};
+
+struct i801_priv {
+	struct i2c_adapter adapter;
+	unsigned long smba;
+	unsigned char original_hstcfg;
+	unsigned char original_slvcmd;
+	struct pci_dev *pci_dev;
+	unsigned int features;
+
+	/* isr processing */
+	wait_queue_head_t waitq;
+	u8 status;
+
+	/* Command state used by isr for byte-by-byte block transactions */
+	u8 cmd;
+	bool is_read;
+	int count;
+	int len;
+	u8 *data;
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+	const struct i801_mux_config *mux_drvdata;
+	struct platform_device *mux_pdev;
+#endif
+	struct platform_device *tco_pdev;
+
+	/*
+	 * If set to true the host controller registers are reserved for
+	 * ACPI AML use. Protected by acpi_lock.
+	 */
+	bool acpi_reserved;
+	struct mutex acpi_lock;
+};
+
+#define FEATURE_SMBUS_PEC	BIT(0)
+#define FEATURE_BLOCK_BUFFER	BIT(1)
+#define FEATURE_BLOCK_PROC	BIT(2)
+#define FEATURE_I2C_BLOCK_READ	BIT(3)
+#define FEATURE_IRQ		BIT(4)
+#define FEATURE_HOST_NOTIFY	BIT(5)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF		BIT(15)
+#define FEATURE_TCO		BIT(16)
+
+static const char *i801_feature_names[] = {
+	"SMBus PEC",
+	"Block buffer",
+	"Block process call",
+	"I2C block read",
+	"Interrupt",
+	"SMBus Host Notify",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+	"\t\t  0x01  disable SMBus PEC\n"
+	"\t\t  0x02  disable the block buffer\n"
+	"\t\t  0x08  disable the I2C block read functionality\n"
+	"\t\t  0x10  don't use interrupts\n"
+	"\t\t  0x20  disable SMBus Host Notify ");
+
+/* Make sure the SMBus host is ready to start transmitting.
+   Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+	int status;
+
+	status = inb_p(SMBHSTSTS(priv));
+	if (status & SMBHSTSTS_HOST_BUSY) {
+		dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
+		return -EBUSY;
+	}
+
+	status &= STATUS_FLAGS;
+	if (status) {
+		dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
+			status);
+		outb_p(status, SMBHSTSTS(priv));
+		status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+		if (status) {
+			dev_err(&priv->pci_dev->dev,
+				"Failed clearing status flags (%02x)\n",
+				status);
+			return -EBUSY;
+		}
+	}
+
+	/*
+	 * Clear CRC status if needed.
+	 * During normal operation, i801_check_post() takes care
+	 * of it after every operation.  We do it here only in case
+	 * the hardware was already in this state when the driver
+	 * started.
+	 */
+	if (priv->features & FEATURE_SMBUS_PEC) {
+		status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+		if (status) {
+			dev_dbg(&priv->pci_dev->dev,
+				"Clearing aux status flags (%02x)\n", status);
+			outb_p(status, SMBAUXSTS(priv));
+			status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+			if (status) {
+				dev_err(&priv->pci_dev->dev,
+					"Failed clearing aux status flags (%02x)\n",
+					status);
+				return -EBUSY;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Convert the status register to an error code, and clear it.
+ * Note that status only contains the bits we want to clear, not the
+ * actual register value.
+ */
+static int i801_check_post(struct i801_priv *priv, int status)
+{
+	int result = 0;
+
+	/*
+	 * If the SMBus is still busy, we give up
+	 * Note: This timeout condition only happens when using polling
+	 * transactions.  For interrupt operation, NAK/timeout is indicated by
+	 * DEV_ERR.
+	 */
+	if (unlikely(status < 0)) {
+		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+		/* try to stop the current command */
+		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+		outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+		       SMBHSTCNT(priv));
+		usleep_range(1000, 2000);
+		outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+		       SMBHSTCNT(priv));
+
+		/* Check if it worked */
+		status = inb_p(SMBHSTSTS(priv));
+		if ((status & SMBHSTSTS_HOST_BUSY) ||
+		    !(status & SMBHSTSTS_FAILED))
+			dev_err(&priv->pci_dev->dev,
+				"Failed terminating the transaction\n");
+		outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+		return -ETIMEDOUT;
+	}
+
+	if (status & SMBHSTSTS_FAILED) {
+		result = -EIO;
+		dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+	}
+	if (status & SMBHSTSTS_DEV_ERR) {
+		/*
+		 * This may be a PEC error, check and clear it.
+		 *
+		 * AUXSTS is handled differently from HSTSTS.
+		 * For HSTSTS, i801_isr() or i801_wait_intr()
+		 * has already cleared the error bits in hardware,
+		 * and we are passed a copy of the original value
+		 * in "status".
+		 * For AUXSTS, the hardware register is left
+		 * for us to handle here.
+		 * This is asymmetric, slightly iffy, but safe,
+		 * since all this code is serialized and the CRCE
+		 * bit is harmless as long as it's cleared before
+		 * the next operation.
+		 */
+		if ((priv->features & FEATURE_SMBUS_PEC) &&
+		    (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
+			outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
+			result = -EBADMSG;
+			dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+		} else {
+			result = -ENXIO;
+			dev_dbg(&priv->pci_dev->dev, "No response\n");
+		}
+	}
+	if (status & SMBHSTSTS_BUS_ERR) {
+		result = -EAGAIN;
+		dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+	}
+
+	/* Clear status flags except BYTE_DONE, to be cleared by caller */
+	outb_p(status, SMBHSTSTS(priv));
+
+	return result;
+}
+
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
+{
+	int timeout = 0;
+	int status;
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+	} while (((status & SMBHSTSTS_HOST_BUSY) ||
+		  !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
+		 (timeout++ < MAX_RETRIES));
+
+	if (timeout > MAX_RETRIES) {
+		dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
+		return -ETIMEDOUT;
+	}
+	return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
+}
+
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
+{
+	int timeout = 0;
+	int status;
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+	} while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
+		 (timeout++ < MAX_RETRIES));
+
+	if (timeout > MAX_RETRIES) {
+		dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
+		return -ETIMEDOUT;
+	}
+	return status & STATUS_ERROR_FLAGS;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+	int status;
+	int result;
+	const struct i2c_adapter *adap = &priv->adapter;
+
+	result = i801_check_pre(priv);
+	if (result < 0)
+		return result;
+
+	if (priv->features & FEATURE_IRQ) {
+		outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+		       SMBHSTCNT(priv));
+		result = wait_event_timeout(priv->waitq,
+					    (status = priv->status),
+					    adap->timeout);
+		if (!result) {
+			status = -ETIMEDOUT;
+			dev_warn(&priv->pci_dev->dev,
+				 "Timeout waiting for interrupt!\n");
+		}
+		priv->status = 0;
+		return i801_check_post(priv, status);
+	}
+
+	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
+	 * SMBSCMD are passed in xact */
+	outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+	status = i801_wait_intr(priv);
+	return i801_check_post(priv, status);
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+					   union i2c_smbus_data *data,
+					   char read_write, int hwpec)
+{
+	int i, len;
+	int status;
+
+	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+	/* Use 32-byte buffer to process this transaction */
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		outb_p(len, SMBHSTDAT0(priv));
+		for (i = 0; i < len; i++)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+	}
+
+	status = i801_transaction(priv, I801_BLOCK_DATA |
+				  (hwpec ? SMBHSTCNT_PEC_EN : 0));
+	if (status)
+		return status;
+
+	if (read_write == I2C_SMBUS_READ) {
+		len = inb_p(SMBHSTDAT0(priv));
+		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+
+		data->block[0] = len;
+		for (i = 0; i < len; i++)
+			data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+	}
+	return 0;
+}
+
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+	if (priv->is_read) {
+		/* For SMBus block reads, length is received with first byte */
+		if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+		    (priv->count == 0)) {
+			priv->len = inb_p(SMBHSTDAT0(priv));
+			if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&priv->pci_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					priv->len);
+				/* FIXME: Recover */
+				priv->len = I2C_SMBUS_BLOCK_MAX;
+			} else {
+				dev_dbg(&priv->pci_dev->dev,
+					"SMBus block read size is %d\n",
+					priv->len);
+			}
+			priv->data[-1] = priv->len;
+		}
+
+		/* Read next byte */
+		if (priv->count < priv->len)
+			priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+		else
+			dev_dbg(&priv->pci_dev->dev,
+				"Discarding extra byte on block read\n");
+
+		/* Set LAST_BYTE for last byte of read transaction */
+		if (priv->count == priv->len - 1)
+			outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+			       SMBHSTCNT(priv));
+	} else if (priv->count < priv->len - 1) {
+		/* Write next byte, except for IRQ after last byte */
+		outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
+	}
+
+	/* Clear BYTE_DONE to continue with next byte */
+	outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
+{
+	unsigned short addr;
+
+	addr = inb_p(SMBNTFDADD(priv)) >> 1;
+
+	/*
+	 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
+	 * always returns 0. Our current implementation doesn't provide
+	 * data, so we just ignore it.
+	 */
+	i2c_handle_smbus_host_notify(&priv->adapter, addr);
+
+	/* clear Host Notify bit and return */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+	return IRQ_HANDLED;
+}
+
+/*
+ * There are three kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ *      INTR - Success
+ *      DEV_ERR - Invalid command, NAK or communication timeout
+ *      BUS_ERR - SMI# transaction collision
+ *      FAILED - transaction was canceled due to a KILL request
+ *    When any of these occur, update ->status and wake up the waitq.
+ *    ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ *    occurs for each byte of a byte-by-byte to prepare the next byte.
+ *
+ * 3) Host Notify interrupts
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+	struct i801_priv *priv = dev_id;
+	u16 pcists;
+	u8 status;
+
+	/* Confirm this is our interrupt */
+	pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+	if (!(pcists & SMBPCISTS_INTS))
+		return IRQ_NONE;
+
+	if (priv->features & FEATURE_HOST_NOTIFY) {
+		status = inb_p(SMBSLVSTS(priv));
+		if (status & SMBSLVSTS_HST_NTFY_STS)
+			return i801_host_notify_isr(priv);
+	}
+
+	status = inb_p(SMBHSTSTS(priv));
+	if (status & SMBHSTSTS_BYTE_DONE)
+		i801_isr_byte_done(priv);
+
+	/*
+	 * Clear irq sources and report transaction result.
+	 * ->status must be cleared before the next transaction is started.
+	 */
+	status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
+	if (status) {
+		outb_p(status, SMBHSTSTS(priv));
+		priv->status = status;
+		wake_up(&priv->waitq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * For "byte-by-byte" block transactions:
+ *   I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ *   I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+					       union i2c_smbus_data *data,
+					       char read_write, int command,
+					       int hwpec)
+{
+	int i, len;
+	int smbcmd;
+	int status;
+	int result;
+	const struct i2c_adapter *adap = &priv->adapter;
+
+	result = i801_check_pre(priv);
+	if (result < 0)
+		return result;
+
+	len = data->block[0];
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		outb_p(len, SMBHSTDAT0(priv));
+		outb_p(data->block[1], SMBBLKDAT(priv));
+	}
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+	    read_write == I2C_SMBUS_READ)
+		smbcmd = I801_I2C_BLOCK_DATA;
+	else
+		smbcmd = I801_BLOCK_DATA;
+
+	if (priv->features & FEATURE_IRQ) {
+		priv->is_read = (read_write == I2C_SMBUS_READ);
+		if (len == 1 && priv->is_read)
+			smbcmd |= SMBHSTCNT_LAST_BYTE;
+		priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+		priv->len = len;
+		priv->count = 0;
+		priv->data = &data->block[1];
+
+		outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+		result = wait_event_timeout(priv->waitq,
+					    (status = priv->status),
+					    adap->timeout);
+		if (!result) {
+			status = -ETIMEDOUT;
+			dev_warn(&priv->pci_dev->dev,
+				 "Timeout waiting for interrupt!\n");
+		}
+		priv->status = 0;
+		return i801_check_post(priv, status);
+	}
+
+	for (i = 1; i <= len; i++) {
+		if (i == len && read_write == I2C_SMBUS_READ)
+			smbcmd |= SMBHSTCNT_LAST_BYTE;
+		outb_p(smbcmd, SMBHSTCNT(priv));
+
+		if (i == 1)
+			outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
+			       SMBHSTCNT(priv));
+
+		status = i801_wait_byte_done(priv);
+		if (status)
+			goto exit;
+
+		if (i == 1 && read_write == I2C_SMBUS_READ
+		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+			len = inb_p(SMBHSTDAT0(priv));
+			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&priv->pci_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					len);
+				/* Recover */
+				while (inb_p(SMBHSTSTS(priv)) &
+				       SMBHSTSTS_HOST_BUSY)
+					outb_p(SMBHSTSTS_BYTE_DONE,
+					       SMBHSTSTS(priv));
+				outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+				return -EPROTO;
+			}
+			data->block[0] = len;
+		}
+
+		/* Retrieve/store value in SMBBLKDAT */
+		if (read_write == I2C_SMBUS_READ)
+			data->block[i] = inb_p(SMBBLKDAT(priv));
+		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+		/* signals SMBBLKDAT ready */
+		outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+	}
+
+	status = i801_wait_intr(priv);
+exit:
+	return i801_check_post(priv, status);
+}
+
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
+{
+	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+	if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+		return -EIO;
+	return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv,
+				  union i2c_smbus_data *data, char read_write,
+				  int command, int hwpec)
+{
+	int result = 0;
+	unsigned char hostc;
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* set I2C_EN bit in configuration register */
+			pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+			pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+					      hostc | SMBHSTCFG_I2C_EN);
+		} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+			dev_err(&priv->pci_dev->dev,
+				"I2C block read is unsupported!\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	if (read_write == I2C_SMBUS_WRITE
+	 || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	} else {
+		data->block[0] = 32;	/* max for SMBus block reads */
+	}
+
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
+	if ((priv->features & FEATURE_BLOCK_BUFFER)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
+	 && i801_set_block_buffer_mode(priv) == 0)
+		result = i801_block_transaction_by_block(priv, data,
+							 read_write, hwpec);
+	else
+		result = i801_block_transaction_byte_by_byte(priv, data,
+							     read_write,
+							     command, hwpec);
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA
+	 && read_write == I2C_SMBUS_WRITE) {
+		/* restore saved configuration register value */
+		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+	}
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	int hwpec;
+	int block = 0;
+	int ret = 0, xact = 0;
+	struct i801_priv *priv = i2c_get_adapdata(adap);
+
+	mutex_lock(&priv->acpi_lock);
+	if (priv->acpi_reserved) {
+		mutex_unlock(&priv->acpi_lock);
+		return -EBUSY;
+	}
+
+	pm_runtime_get_sync(&priv->pci_dev->dev);
+
+	hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+		&& size != I2C_SMBUS_QUICK
+		&& size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		xact = I801_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD(priv));
+		xact = I801_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0(priv));
+		xact = I801_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		}
+		xact = I801_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/*
+		 * NB: page 240 of ICH5 datasheet shows that the R/#W
+		 * bit should be cleared here, even when reading.
+		 * However if SPD Write Disable is set (Lynx Point and later),
+		 * the read will fail if we don't set the R/#W bit.
+		 */
+		outb_p(((addr & 0x7f) << 1) |
+		       ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ?
+			(read_write & 0x01) : 0),
+		       SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_READ) {
+			/* NB: page 240 of ICH5 datasheet also shows
+			 * that DATA1 is the cmd field when reading */
+			outb_p(command, SMBHSTDAT1(priv));
+		} else
+			outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	default:
+		dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+			size);
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (hwpec)	/* enable/disable hardware PEC */
+		outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+	else
+		outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+		       SMBAUXCTL(priv));
+
+	if (block)
+		ret = i801_block_transaction(priv, data, read_write, size,
+					     hwpec);
+	else
+		ret = i801_transaction(priv, xact);
+
+	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
+	   time, so we forcibly disable it after every transaction. Turn off
+	   E32B for the same reason. */
+	if (hwpec || block)
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	if (block)
+		goto out;
+	if (ret)
+		goto out;
+	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+		goto out;
+
+	switch (xact & 0x7f) {
+	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
+	case I801_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0(priv));
+		break;
+	case I801_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0(priv)) +
+			     (inb_p(SMBHSTDAT1(priv)) << 8);
+		break;
+	}
+
+out:
+	pm_runtime_mark_last_busy(&priv->pci_dev->dev);
+	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
+	mutex_unlock(&priv->acpi_lock);
+	return ret;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+	       ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
+	       ((priv->features & FEATURE_HOST_NOTIFY) ?
+		I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
+}
+
+static void i801_enable_host_notify(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	if (!(priv->features & FEATURE_HOST_NOTIFY))
+		return;
+
+	if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd))
+		outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd,
+		       SMBSLVCMD(priv));
+
+	/* clear Host Notify bit to allow a new notification */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+}
+
+static void i801_disable_host_notify(struct i801_priv *priv)
+{
+	if (!(priv->features & FEATURE_HOST_NOTIFY))
+		return;
+
+	outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= i801_access,
+	.functionality	= i801_func,
+};
+
+static const struct pci_device_id i801_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+	ssize_t offset;
+	const unsigned char signature[] = "FJKEYINF";
+
+	for (offset = 0; offset < 0x10000; offset += 0x10) {
+		if (check_signature(bios + offset, signature,
+				    sizeof(signature)-1))
+			return bios + offset;
+	}
+	return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+	void __iomem *bios;
+	const void __iomem *p;
+
+	bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+	p = bios_signature(bios);
+	if (p) {
+		/* just use the first address */
+		apanel_addr = readb(p + 8 + 3) >> 1;
+	}
+	iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+	const char *name;
+	u8 type;
+	unsigned short i2c_addr;
+	const char *i2c_type;
+};
+
+static const struct dmi_onboard_device_info dmi_devices[] = {
+	{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+	{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+	{ "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name,
+				     struct i2c_adapter *adap)
+{
+	int i;
+	struct i2c_board_info info;
+
+	for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+		/* & ~0x80, ignore enabled/disabled bit */
+		if ((type & ~0x80) != dmi_devices[i].type)
+			continue;
+		if (strcasecmp(name, dmi_devices[i].name))
+			continue;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = dmi_devices[i].i2c_addr;
+		strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+		i2c_new_device(adap, &info);
+		break;
+	}
+}
+
+/* We use our own function to check for onboard devices instead of
+   dmi_find_device() as some buggy BIOS's have the devices we are interested
+   in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
+{
+	int i, count;
+
+	if (dm->type != 10)
+		return;
+
+	count = (dm->length - sizeof(struct dmi_header)) / 2;
+	for (i = 0; i < count; i++) {
+		const u8 *d = (char *)(dm + 1) + (i * 2);
+		const char *name = ((char *) dm) + dm->length;
+		u8 type = d[0];
+		u8 s = d[1];
+
+		if (!s)
+			continue;
+		s--;
+		while (s > 0 && name[0]) {
+			name += strlen(name) + 1;
+			s--;
+		}
+		if (name[0] == 0) /* Bogus string reference */
+			continue;
+
+		dmi_check_onboard_device(type, name, adap);
+	}
+}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+	/* Only register slaves on main SMBus channel */
+	if (priv->features & FEATURE_IDF)
+		return;
+
+	if (apanel_addr) {
+		struct i2c_board_info info;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = apanel_addr;
+		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+		i2c_new_device(&priv->adapter, &info);
+	}
+
+	if (dmi_name_in_vendors("FUJITSU"))
+		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif	/* CONFIG_X86 && CONFIG_DMI */
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+	.gpio_chip = "gpio_ich",
+	.values = { 0x02, 0x03 },
+	.n_values = 2,
+	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+	.gpios = { 52, 53 },
+	.n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+	.gpio_chip = "gpio_ich",
+	.values = { 0x02, 0x03, 0x01 },
+	.n_values = 3,
+	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+	.gpios = { 52, 53 },
+	.n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d18,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d18,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{ }
+};
+
+/* Setup multiplexing if needed */
+static int i801_add_mux(struct i801_priv *priv)
+{
+	struct device *dev = &priv->adapter.dev;
+	const struct i801_mux_config *mux_config;
+	struct i2c_mux_gpio_platform_data gpio_data;
+	int err;
+
+	if (!priv->mux_drvdata)
+		return 0;
+	mux_config = priv->mux_drvdata;
+
+	/* Prepare the platform data */
+	memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+	gpio_data.parent = priv->adapter.nr;
+	gpio_data.values = mux_config->values;
+	gpio_data.n_values = mux_config->n_values;
+	gpio_data.classes = mux_config->classes;
+	gpio_data.gpio_chip = mux_config->gpio_chip;
+	gpio_data.gpios = mux_config->gpios;
+	gpio_data.n_gpios = mux_config->n_gpios;
+	gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+	/* Register the mux device */
+	priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+				PLATFORM_DEVID_AUTO, &gpio_data,
+				sizeof(struct i2c_mux_gpio_platform_data));
+	if (IS_ERR(priv->mux_pdev)) {
+		err = PTR_ERR(priv->mux_pdev);
+		priv->mux_pdev = NULL;
+		dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+	if (priv->mux_pdev)
+		platform_device_unregister(priv->mux_pdev);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+	const struct dmi_system_id *id;
+	const struct i801_mux_config *mux_config;
+	unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	int i;
+
+	id = dmi_first_match(mux_dmi_table);
+	if (id) {
+		/* Remove branch classes from trunk */
+		mux_config = id->driver_data;
+		for (i = 0; i < mux_config->n_values; i++)
+			class &= ~mux_config->classes[i];
+
+		/* Remember for later */
+		priv->mux_drvdata = mux_config;
+	}
+
+	return class;
+}
+#else
+static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+	return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
+#endif
+
+static const struct itco_wdt_platform_data tco_platform_data = {
+	.name = "Intel PCH",
+	.version = 4,
+};
+
+static DEFINE_SPINLOCK(p2sb_spinlock);
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+	struct pci_dev *pci_dev = priv->pci_dev;
+	struct resource tco_res[3], *res;
+	struct platform_device *pdev;
+	unsigned int devfn;
+	u32 tco_base, tco_ctl;
+	u32 base_addr, ctrl_val;
+	u64 base64_addr;
+	u8 hidden;
+
+	if (!(priv->features & FEATURE_TCO))
+		return;
+
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+	if (!(tco_ctl & TCOCTL_EN))
+		return;
+
+	memset(tco_res, 0, sizeof(tco_res));
+
+	res = &tco_res[ICH_RES_IO_TCO];
+	res->start = tco_base & ~1;
+	res->end = res->start + 32 - 1;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Power Management registers.
+	 */
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
+
+	res = &tco_res[ICH_RES_IO_SMI];
+	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Enable the ACPI I/O space.
+	 */
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
+	ctrl_val |= ACPICTRL_EN;
+	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
+
+	/*
+	 * We must access the NO_REBOOT bit over the Primary to Sideband
+	 * bridge (P2SB). The BIOS prevents the P2SB device from being
+	 * enumerated by the PCI subsystem, so we need to unhide/hide it
+	 * to lookup the P2SB BAR.
+	 */
+	spin_lock(&p2sb_spinlock);
+
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
+
+	/* Unhide the P2SB device, if it is hidden */
+	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
+	if (hidden)
+		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
+
+	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
+	base64_addr = base_addr & 0xfffffff0;
+
+	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
+	base64_addr |= (u64)base_addr << 32;
+
+	/* Hide the P2SB device, if it was hidden before */
+	if (hidden)
+		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
+	spin_unlock(&p2sb_spinlock);
+
+	res = &tco_res[ICH_RES_MEM_OFF];
+	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
+		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+	else
+		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_MEM;
+
+	pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+						 tco_res, 3, &tco_platform_data,
+						 sizeof(tco_platform_data));
+	if (IS_ERR(pdev)) {
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+		return;
+	}
+
+	priv->tco_pdev = pdev;
+}
+
+#ifdef CONFIG_ACPI
+static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
+				      acpi_physical_address address)
+{
+	return address >= priv->smba &&
+	       address <= pci_resource_end(priv->pci_dev, SMBBAR);
+}
+
+static acpi_status
+i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
+		     u64 *value, void *handler_context, void *region_context)
+{
+	struct i801_priv *priv = handler_context;
+	struct pci_dev *pdev = priv->pci_dev;
+	acpi_status status;
+
+	/*
+	 * Once BIOS AML code touches the OpRegion we warn and inhibit any
+	 * further access from the driver itself. This device is now owned
+	 * by the system firmware.
+	 */
+	mutex_lock(&priv->acpi_lock);
+
+	if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
+		priv->acpi_reserved = true;
+
+		dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
+		dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+
+		/*
+		 * BIOS is accessing the host controller so prevent it from
+		 * suspending automatically from now on.
+		 */
+		pm_runtime_get_sync(&pdev->dev);
+	}
+
+	if ((function & ACPI_IO_MASK) == ACPI_READ)
+		status = acpi_os_read_port(address, (u32 *)value, bits);
+	else
+		status = acpi_os_write_port(address, (u32)*value, bits);
+
+	mutex_unlock(&priv->acpi_lock);
+
+	return status;
+}
+
+static int i801_acpi_probe(struct i801_priv *priv)
+{
+	struct acpi_device *adev;
+	acpi_status status;
+
+	adev = ACPI_COMPANION(&priv->pci_dev->dev);
+	if (adev) {
+		status = acpi_install_address_space_handler(adev->handle,
+				ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler,
+				NULL, priv);
+		if (ACPI_SUCCESS(status))
+			return 0;
+	}
+
+	return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
+}
+
+static void i801_acpi_remove(struct i801_priv *priv)
+{
+	struct acpi_device *adev;
+
+	adev = ACPI_COMPANION(&priv->pci_dev->dev);
+	if (!adev)
+		return;
+
+	acpi_remove_address_space_handler(adev->handle,
+		ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
+
+	mutex_lock(&priv->acpi_lock);
+	if (priv->acpi_reserved)
+		pm_runtime_put(&priv->pci_dev->dev);
+	mutex_unlock(&priv->acpi_lock);
+}
+#else
+static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
+static inline void i801_acpi_remove(struct i801_priv *priv) { }
+#endif
+
+static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
+{
+	unsigned char hstcfg = priv->original_hstcfg;
+
+	hstcfg &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	hstcfg |= SMBHSTCFG_HST_EN;
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+	return hstcfg;
+}
+
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	unsigned char temp;
+	int err, i;
+	struct i801_priv *priv;
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	i2c_set_adapdata(&priv->adapter, priv);
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = i801_get_adapter_class(priv);
+	priv->adapter.algo = &smbus_algorithm;
+	priv->adapter.dev.parent = &dev->dev;
+	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
+	priv->adapter.retries = 3;
+	mutex_init(&priv->acpi_lock);
+
+	priv->pci_dev = dev;
+	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
+	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
+	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
+	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		/* If we have ACPI based watchdog use that instead */
+		if (!acpi_has_watchdog())
+			priv->features |= FEATURE_TCO;
+		priv->features |= FEATURE_HOST_NOTIFY;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
+		priv->features |= FEATURE_IDF;
+		/* fall through */
+	default:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801DB_3:
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801CA_3:
+		priv->features |= FEATURE_HOST_NOTIFY;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801BA_2:
+	case PCI_DEVICE_ID_INTEL_82801AB_3:
+	case PCI_DEVICE_ID_INTEL_82801AA_3:
+		break;
+	}
+
+	/* Disable features on user request */
+	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+		if (priv->features & disable_features & (1 << i))
+			dev_notice(&dev->dev, "%s disabled by user\n",
+				   i801_feature_names[i]);
+	}
+	priv->features &= ~disable_features;
+
+	err = pcim_enable_device(dev);
+	if (err) {
+		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		return err;
+	}
+	pcim_pin_device(dev);
+
+	/* Determine the address of the SMBus area */
+	priv->smba = pci_resource_start(dev, SMBBAR);
+	if (!priv->smba) {
+		dev_err(&dev->dev,
+			"SMBus base address uninitialized, upgrade BIOS\n");
+		return -ENODEV;
+	}
+
+	if (i801_acpi_probe(priv))
+		return -ENODEV;
+
+	err = pcim_iomap_regions(dev, 1 << SMBBAR,
+				 dev_driver_string(&dev->dev));
+	if (err) {
+		dev_err(&dev->dev,
+			"Failed to request SMBus region 0x%lx-0x%Lx\n",
+			priv->smba,
+			(unsigned long long)pci_resource_end(dev, SMBBAR));
+		i801_acpi_remove(priv);
+		return err;
+	}
+
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+	temp = i801_setup_hstcfg(priv);
+	if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
+		dev_info(&dev->dev, "Enabling SMBus device\n");
+
+	if (temp & SMBHSTCFG_SMB_SMI_EN) {
+		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+		/* Disable SMBus interrupt feature if SMBus using SMI# */
+		priv->features &= ~FEATURE_IRQ;
+	}
+	if (temp & SMBHSTCFG_SPD_WD)
+		dev_info(&dev->dev, "SPD Write Disable is set\n");
+
+	/* Clear special mode bits */
+	if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	/* Remember original Host Notify setting */
+	if (priv->features & FEATURE_HOST_NOTIFY)
+		priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
+
+	/* Default timeout in interrupt mode: 200 ms */
+	priv->adapter.timeout = HZ / 5;
+
+	if (dev->irq == IRQ_NOTCONNECTED)
+		priv->features &= ~FEATURE_IRQ;
+
+	if (priv->features & FEATURE_IRQ) {
+		u16 pcictl, pcists;
+
+		/* Complain if an interrupt is already pending */
+		pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+		if (pcists & SMBPCISTS_INTS)
+			dev_warn(&dev->dev, "An interrupt is pending!\n");
+
+		/* Check if interrupts have been disabled */
+		pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
+		if (pcictl & SMBPCICTL_INTDIS) {
+			dev_info(&dev->dev, "Interrupts are disabled\n");
+			priv->features &= ~FEATURE_IRQ;
+		}
+	}
+
+	if (priv->features & FEATURE_IRQ) {
+		init_waitqueue_head(&priv->waitq);
+
+		err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
+				       IRQF_SHARED,
+				       dev_driver_string(&dev->dev), priv);
+		if (err) {
+			dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+				dev->irq, err);
+			priv->features &= ~FEATURE_IRQ;
+		}
+	}
+	dev_info(&dev->dev, "SMBus using %s\n",
+		 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
+
+	i801_add_tco(priv);
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		"SMBus I801 adapter at %04lx", priv->smba);
+	err = i2c_add_adapter(&priv->adapter);
+	if (err) {
+		i801_acpi_remove(priv);
+		return err;
+	}
+
+	i801_enable_host_notify(&priv->adapter);
+
+	i801_probe_optional_slaves(priv);
+	/* We ignore errors - multiplexing is optional */
+	i801_add_mux(priv);
+
+	pci_set_drvdata(dev, priv);
+
+	pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
+	pm_runtime_use_autosuspend(&dev->dev);
+	pm_runtime_put_autosuspend(&dev->dev);
+	pm_runtime_allow(&dev->dev);
+
+	return 0;
+}
+
+static void i801_remove(struct pci_dev *dev)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	pm_runtime_forbid(&dev->dev);
+	pm_runtime_get_noresume(&dev->dev);
+
+	i801_disable_host_notify(priv);
+	i801_del_mux(priv);
+	i2c_del_adapter(&priv->adapter);
+	i801_acpi_remove(priv);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+	platform_device_unregister(priv->tco_pdev);
+
+	/*
+	 * do not call pci_disable_device(dev) since it can cause hard hangs on
+	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+	 */
+}
+
+static void i801_shutdown(struct pci_dev *dev)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	/* Restore config registers to avoid hard hang on some systems */
+	i801_disable_host_notify(priv);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
+#ifdef CONFIG_PM
+static int i801_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct i801_priv *priv = pci_get_drvdata(pci_dev);
+
+	pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
+	return 0;
+}
+
+static int i801_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct i801_priv *priv = pci_get_drvdata(pci_dev);
+
+	i801_setup_hstcfg(priv);
+	i801_enable_host_notify(&priv->adapter);
+
+	return 0;
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(i801_pm_ops, i801_suspend,
+			    i801_resume, NULL);
+
+static struct pci_driver i801_driver = {
+	.name		= "i801_smbus",
+	.id_table	= i801_ids,
+	.probe		= i801_probe,
+	.remove		= i801_remove,
+	.shutdown	= i801_shutdown,
+	.driver		= {
+		.pm	= &i801_pm_ops,
+	},
+};
+
+static int __init i2c_i801_init(void)
+{
+	if (dmi_name_in_vendors("FUJITSU"))
+		input_apanel_init();
+	return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+	pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.c
new file mode 100644
index 0000000..961c5f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.c
@@ -0,0 +1,812 @@
+/*
+ * drivers/i2c/busses/i2c-ibm_iic.c
+ *
+ * Support for the IIC peripheral on IBM PPC 4xx
+ *
+ * Copyright (c) 2003, 2004 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * Based on original work by
+ * 	Ian DaSilva  <idasilva@mvista.com>
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Matt Porter  <mporter@mvista.com>
+ *
+ *      Copyright 2000-2003 MontaVista Software Inc.
+ *
+ * Original driver version was highly leveraged from i2c-elektor.c
+ *
+ *   	Copyright 1995-97 Simon G. Vogl
+ *                1998-99 Hans Berglund
+ *
+ *   	With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
+ *	and even Frodo Looijaard <frodol@dds.nl>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/sched/signal.h>
+
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include "i2c-ibm_iic.h"
+
+#define DRIVER_VERSION "2.2"
+
+MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static bool iic_force_poll;
+module_param(iic_force_poll, bool, 0);
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+
+static bool iic_force_fast;
+module_param(iic_force_fast, bool, 0);
+MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
+
+#define DBG_LEVEL 0
+
+#ifdef DBG
+#undef DBG
+#endif
+
+#ifdef DBG2
+#undef DBG2
+#endif
+
+#if DBG_LEVEL > 0
+#  define DBG(f,x...)	printk(KERN_DEBUG "ibm-iic" f, ##x)
+#else
+#  define DBG(f,x...)	((void)0)
+#endif
+#if DBG_LEVEL > 1
+#  define DBG2(f,x...) 	DBG(f, ##x)
+#else
+#  define DBG2(f,x...) 	((void)0)
+#endif
+#if DBG_LEVEL > 2
+static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
+	printk(KERN_DEBUG
+	       "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
+	       "  sts      = 0x%02x, extsts = 0x%02x\n"
+	       "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
+	       "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+		in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
+		in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
+		in_8(&iic->xtcntlss), in_8(&iic->directcntl));
+}
+#  define DUMP_REGS(h,dev)	dump_iic_regs((h),(dev))
+#else
+#  define DUMP_REGS(h,dev)	((void)0)
+#endif
+
+/* Bus timings (in ns) for bit-banging */
+static struct ibm_iic_timings {
+	unsigned int hd_sta;
+	unsigned int su_sto;
+	unsigned int low;
+	unsigned int high;
+	unsigned int buf;
+} timings [] = {
+/* Standard mode (100 KHz) */
+{
+	.hd_sta	= 4000,
+	.su_sto	= 4000,
+	.low	= 4700,
+	.high	= 4000,
+	.buf	= 4700,
+},
+/* Fast mode (400 KHz) */
+{
+	.hd_sta = 600,
+	.su_sto	= 600,
+	.low 	= 1300,
+	.high 	= 600,
+	.buf	= 1300,
+}};
+
+/* Enable/disable interrupt generation */
+static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable)
+{
+	out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
+}
+
+/*
+ * Initialize IIC interface.
+ */
+static void iic_dev_init(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+	DBG("%d: init\n", dev->idx);
+
+	/* Clear master address */
+	out_8(&iic->lmadr, 0);
+	out_8(&iic->hmadr, 0);
+
+	/* Clear slave address */
+	out_8(&iic->lsadr, 0);
+	out_8(&iic->hsadr, 0);
+
+	/* Clear status & extended status */
+	out_8(&iic->sts, STS_SCMP | STS_IRQA);
+	out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA
+			    | EXTSTS_ICT | EXTSTS_XFRA);
+
+	/* Set clock divider */
+	out_8(&iic->clkdiv, dev->clckdiv);
+
+	/* Clear transfer count */
+	out_8(&iic->xfrcnt, 0);
+
+	/* Clear extended control and status */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC
+			    | XTCNTLSS_SWS);
+
+	/* Clear control register */
+	out_8(&iic->cntl, 0);
+
+	/* Enable interrupts if possible */
+	iic_interrupt_mode(dev, dev->irq >= 0);
+
+	/* Set mode control */
+	out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS
+			    | (dev->fast_mode ? MDCNTL_FSM : 0));
+
+	DUMP_REGS("iic_init", dev);
+}
+
+/*
+ * Reset IIC interface
+ */
+static void iic_dev_reset(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int i;
+	u8 dc;
+
+	DBG("%d: soft reset\n", dev->idx);
+	DUMP_REGS("reset", dev);
+
+    	/* Place chip in the reset state */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+
+	/* Check if bus is free */
+	dc = in_8(&iic->directcntl);
+	if (!DIRCTNL_FREE(dc)){
+		DBG("%d: trying to regain bus control\n", dev->idx);
+
+		/* Try to set bus free state */
+		out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
+		/* Wait until we regain bus control */
+		for (i = 0; i < 100; ++i){
+			dc = in_8(&iic->directcntl);
+			if (DIRCTNL_FREE(dc))
+				break;
+
+			/* Toggle SCL line */
+			dc ^= DIRCNTL_SCC;
+			out_8(&iic->directcntl, dc);
+			udelay(10);
+			dc ^= DIRCNTL_SCC;
+			out_8(&iic->directcntl, dc);
+
+			/* be nice */
+			cond_resched();
+		}
+	}
+
+	/* Remove reset */
+	out_8(&iic->xtcntlss, 0);
+
+	/* Reinitialize interface */
+	iic_dev_init(dev);
+}
+
+/*
+ * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register.
+ */
+
+/* Wait for SCL and/or SDA to be high */
+static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask)
+{
+	unsigned long x = jiffies + HZ / 28 + 2;
+	while ((in_8(&iic->directcntl) & mask) != mask){
+		if (unlikely(time_after(jiffies, x)))
+			return -1;
+		cond_resched();
+	}
+	return 0;
+}
+
+static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	const struct ibm_iic_timings *t = &timings[dev->fast_mode ? 1 : 0];
+	u8 mask, v, sda;
+	int i, res;
+
+	/* Only 7-bit addresses are supported */
+	if (unlikely(p->flags & I2C_M_TEN)){
+		DBG("%d: smbus_quick - 10 bit addresses are not supported\n",
+			dev->idx);
+		return -EINVAL;
+	}
+
+	DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr);
+
+	/* Reset IIC interface */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+
+	/* Wait for bus to become free */
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC)))
+		goto err;
+	ndelay(t->buf);
+
+	/* START */
+	out_8(&iic->directcntl, DIRCNTL_SCC);
+	sda = 0;
+	ndelay(t->hd_sta);
+
+	/* Send address */
+	v = i2c_8bit_addr_from_msg(p);
+	for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){
+		out_8(&iic->directcntl, sda);
+		ndelay(t->low / 2);
+		sda = (v & mask) ? DIRCNTL_SDAC : 0;
+		out_8(&iic->directcntl, sda);
+		ndelay(t->low / 2);
+
+		out_8(&iic->directcntl, DIRCNTL_SCC | sda);
+		if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+			goto err;
+		ndelay(t->high);
+	}
+
+	/* ACK */
+	out_8(&iic->directcntl, sda);
+	ndelay(t->low / 2);
+	out_8(&iic->directcntl, DIRCNTL_SDAC);
+	ndelay(t->low / 2);
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+		goto err;
+	res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1;
+	ndelay(t->high);
+
+	/* STOP */
+	out_8(&iic->directcntl, 0);
+	ndelay(t->low);
+	out_8(&iic->directcntl, DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+		goto err;
+	ndelay(t->su_sto);
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
+	ndelay(t->buf);
+
+	DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK");
+out:
+	/* Remove reset */
+	out_8(&iic->xtcntlss, 0);
+
+	/* Reinitialize interface */
+	iic_dev_init(dev);
+
+	return res;
+err:
+	DBG("%d: smbus_quick - bus is stuck\n", dev->idx);
+	res = -EREMOTEIO;
+	goto out;
+}
+
+/*
+ * IIC interrupt handler
+ */
+static irqreturn_t iic_handler(int irq, void *dev_id)
+{
+	struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+	DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
+	     dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
+
+	/* Acknowledge IRQ and wakeup iic_wait_for_tc */
+	out_8(&iic->sts, STS_IRQA | STS_SCMP);
+	wake_up_interruptible(&dev->wq);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Get master transfer result and clear errors if any.
+ * Returns the number of actually transferred bytes or error (<0)
+ */
+static int iic_xfer_result(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+	if (unlikely(in_8(&iic->sts) & STS_ERR)){
+		DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
+			in_8(&iic->extsts));
+
+		/* Clear errors and possible pending IRQs */
+		out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
+			EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
+
+		/* Flush master data buffer */
+		out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+
+		/* Is bus free?
+		 * If error happened during combined xfer
+		 * IIC interface is usually stuck in some strange
+		 * state, the only way out - soft reset.
+		 */
+		if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+			DBG("%d: bus is stuck, resetting\n", dev->idx);
+			iic_dev_reset(dev);
+		}
+		return -EREMOTEIO;
+	}
+	else
+		return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK;
+}
+
+/*
+ * Try to abort active transfer.
+ */
+static void iic_abort_xfer(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	unsigned long x;
+
+	DBG("%d: iic_abort_xfer\n", dev->idx);
+
+	out_8(&iic->cntl, CNTL_HMT);
+
+	/*
+	 * Wait for the abort command to complete.
+	 * It's not worth to be optimized, just poll (timeout >= 1 tick)
+	 */
+	x = jiffies + 2;
+	while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+		if (time_after(jiffies, x)){
+			DBG("%d: abort timeout, resetting...\n", dev->idx);
+			iic_dev_reset(dev);
+			return;
+		}
+		schedule();
+	}
+
+	/* Just to clear errors */
+	iic_xfer_result(dev);
+}
+
+/*
+ * Wait for master transfer to complete.
+ * It puts current process to sleep until we get interrupt or timeout expires.
+ * Returns the number of transferred bytes or error (<0)
+ */
+static int iic_wait_for_tc(struct ibm_iic_private* dev){
+
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int ret = 0;
+
+	if (dev->irq >= 0){
+		/* Interrupt mode */
+		ret = wait_event_interruptible_timeout(dev->wq,
+			!(in_8(&iic->sts) & STS_PT), dev->adap.timeout);
+
+		if (unlikely(ret < 0))
+			DBG("%d: wait interrupted\n", dev->idx);
+		else if (unlikely(in_8(&iic->sts) & STS_PT)){
+			DBG("%d: wait timeout\n", dev->idx);
+			ret = -ETIMEDOUT;
+		}
+	}
+	else {
+		/* Polling mode */
+		unsigned long x = jiffies + dev->adap.timeout;
+
+		while (in_8(&iic->sts) & STS_PT){
+			if (unlikely(time_after(jiffies, x))){
+				DBG("%d: poll timeout\n", dev->idx);
+				ret = -ETIMEDOUT;
+				break;
+			}
+
+			if (unlikely(signal_pending(current))){
+				DBG("%d: poll interrupted\n", dev->idx);
+				ret = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+		}
+	}
+
+	if (unlikely(ret < 0))
+		iic_abort_xfer(dev);
+	else
+		ret = iic_xfer_result(dev);
+
+	DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
+
+	return ret;
+}
+
+/*
+ * Low level master transfer routine
+ */
+static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
+			  int combined_xfer)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	char* buf = pm->buf;
+	int i, j, loops, ret = 0;
+	int len = pm->len;
+
+	u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
+	if (pm->flags & I2C_M_RD)
+		cntl |= CNTL_RW;
+
+	loops = (len + 3) / 4;
+	for (i = 0; i < loops; ++i, len -= 4){
+		int count = len > 4 ? 4 : len;
+		u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
+
+		if (!(cntl & CNTL_RW))
+			for (j = 0; j < count; ++j)
+				out_8((void __iomem *)&iic->mdbuf, *buf++);
+
+		if (i < loops - 1)
+			cmd |= CNTL_CHT;
+		else if (combined_xfer)
+			cmd |= CNTL_RPST;
+
+		DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
+
+		/* Start transfer */
+		out_8(&iic->cntl, cmd);
+
+		/* Wait for completion */
+		ret = iic_wait_for_tc(dev);
+
+		if (unlikely(ret < 0))
+			break;
+		else if (unlikely(ret != count)){
+			DBG("%d: xfer_bytes, requested %d, transferred %d\n",
+				dev->idx, count, ret);
+
+			/* If it's not a last part of xfer, abort it */
+			if (combined_xfer || (i < loops - 1))
+    				iic_abort_xfer(dev);
+
+			ret = -EREMOTEIO;
+			break;
+		}
+
+		if (cntl & CNTL_RW)
+			for (j = 0; j < count; ++j)
+				*buf++ = in_8((void __iomem *)&iic->mdbuf);
+	}
+
+	return ret > 0 ? 0 : ret;
+}
+
+/*
+ * Set target slave address for master transfer
+ */
+static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	u16 addr = msg->addr;
+
+	DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
+		addr, msg->flags & I2C_M_TEN ? 10 : 7);
+
+	if (msg->flags & I2C_M_TEN){
+	    out_8(&iic->cntl, CNTL_AMD);
+	    out_8(&iic->lmadr, addr);
+	    out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06));
+	}
+	else {
+	    out_8(&iic->cntl, 0);
+	    out_8(&iic->lmadr, addr << 1);
+	}
+}
+
+static inline int iic_invalid_address(const struct i2c_msg* p)
+{
+	return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
+}
+
+static inline int iic_address_neq(const struct i2c_msg* p1,
+				  const struct i2c_msg* p2)
+{
+	return (p1->addr != p2->addr)
+		|| ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
+}
+
+/*
+ * Generic master transfer entrypoint.
+ * Returns the number of processed messages or error (<0)
+ */
+static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+    	struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int i, ret = 0;
+
+	DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
+
+	if (!num)
+		return 0;
+
+	/* Check the sanity of the passed messages.
+	 * Uhh, generic i2c layer is more suitable place for such code...
+	 */
+	if (unlikely(iic_invalid_address(&msgs[0]))){
+		DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
+			msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
+		return -EINVAL;
+	}
+	for (i = 0; i < num; ++i){
+		if (unlikely(msgs[i].len <= 0)){
+			if (num == 1 && !msgs[0].len){
+				/* Special case for I2C_SMBUS_QUICK emulation.
+				 * IBM IIC doesn't support 0-length transactions
+				 * so we have to emulate them using bit-banging.
+				 */
+				return iic_smbus_quick(dev, &msgs[0]);
+			}
+			DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
+				msgs[i].len, i);
+			return -EINVAL;
+		}
+		if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){
+			DBG("%d: invalid addr in msg[%d]\n", dev->idx, i);
+			return -EINVAL;
+		}
+	}
+
+	/* Check bus state */
+	if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
+		DBG("%d: iic_xfer, bus is not free\n", dev->idx);
+
+		/* Usually it means something serious has happened.
+		 * We *cannot* have unfinished previous transfer
+		 * so it doesn't make any sense to try to stop it.
+		 * Probably we were not able to recover from the
+		 * previous error.
+		 * The only *reasonable* thing I can think of here
+		 * is soft reset.  --ebs
+		 */
+		iic_dev_reset(dev);
+
+		if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+			DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
+			return -EREMOTEIO;
+		}
+	}
+	else {
+		/* Flush master data buffer (just in case) */
+		out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+	}
+
+	/* Load slave address */
+	iic_address(dev, &msgs[0]);
+
+	/* Do real transfer */
+    	for (i = 0; i < num && !ret; ++i)
+		ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
+
+	return ret < 0 ? ret : num;
+}
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm iic_algo = {
+	.master_xfer 	= iic_xfer,
+	.functionality	= iic_func
+};
+
+/*
+ * Calculates IICx_CLCKDIV value for a specific OPB clock frequency
+ */
+static inline u8 iic_clckdiv(unsigned int opb)
+{
+	/* Compatibility kludge, should go away after all cards
+	 * are fixed to fill correct value for opbfreq.
+	 * Previous driver version used hardcoded divider value 4,
+	 * it corresponds to OPB frequency from the range (40, 50] MHz
+	 */
+	if (!opb){
+		printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq,"
+			" fix your board specific setup\n");
+		opb = 50000000;
+	}
+
+	/* Convert to MHz */
+	opb /= 1000000;
+
+	if (opb < 20 || opb > 150){
+		printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n",
+			opb);
+		opb = opb < 20 ? 20 : 150;
+	}
+	return (u8)((opb + 9) / 10 - 1);
+}
+
+static int iic_request_irq(struct platform_device *ofdev,
+				     struct ibm_iic_private *dev)
+{
+	struct device_node *np = ofdev->dev.of_node;
+	int irq;
+
+	if (iic_force_poll)
+		return 0;
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
+		return 0;
+	}
+
+	/* Disable interrupts until we finish initialization, assumes
+	 *  level-sensitive IRQ setup...
+	 */
+	iic_interrupt_mode(dev, 0);
+	if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) {
+		dev_err(&ofdev->dev, "request_irq %d failed\n", irq);
+		/* Fallback to the polling mode */
+		return 0;
+	}
+
+	return irq;
+}
+
+/*
+ * Register single IIC interface
+ */
+static int iic_probe(struct platform_device *ofdev)
+{
+	struct device_node *np = ofdev->dev.of_node;
+	struct ibm_iic_private *dev;
+	struct i2c_adapter *adap;
+	const u32 *freq;
+	int ret;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&ofdev->dev, "failed to allocate device data\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(ofdev, dev);
+
+	dev->vaddr = of_iomap(np, 0);
+	if (dev->vaddr == NULL) {
+		dev_err(&ofdev->dev, "failed to iomap device\n");
+		ret = -ENXIO;
+		goto error_cleanup;
+	}
+
+	init_waitqueue_head(&dev->wq);
+
+	dev->irq = iic_request_irq(ofdev, dev);
+	if (!dev->irq)
+		dev_warn(&ofdev->dev, "using polling mode\n");
+
+	/* Board specific settings */
+	if (iic_force_fast || of_get_property(np, "fast-mode", NULL))
+		dev->fast_mode = 1;
+
+	freq = of_get_property(np, "clock-frequency", NULL);
+	if (freq == NULL) {
+		freq = of_get_property(np->parent, "clock-frequency", NULL);
+		if (freq == NULL) {
+			dev_err(&ofdev->dev, "Unable to get bus frequency\n");
+			ret = -EINVAL;
+			goto error_cleanup;
+		}
+	}
+
+	dev->clckdiv = iic_clckdiv(*freq);
+	dev_dbg(&ofdev->dev, "clckdiv = %d\n", dev->clckdiv);
+
+	/* Initialize IIC interface */
+	iic_dev_init(dev);
+
+	/* Register it with i2c layer */
+	adap = &dev->adap;
+	adap->dev.parent = &ofdev->dev;
+	adap->dev.of_node = of_node_get(np);
+	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
+	i2c_set_adapdata(adap, dev);
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->algo = &iic_algo;
+	adap->timeout = HZ;
+
+	ret = i2c_add_adapter(adap);
+	if (ret  < 0)
+		goto error_cleanup;
+
+	dev_info(&ofdev->dev, "using %s mode\n",
+		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+
+	return 0;
+
+error_cleanup:
+	if (dev->irq) {
+		iic_interrupt_mode(dev, 0);
+		free_irq(dev->irq, dev);
+	}
+
+	if (dev->vaddr)
+		iounmap(dev->vaddr);
+
+	kfree(dev);
+	return ret;
+}
+
+/*
+ * Cleanup initialized IIC interface
+ */
+static int iic_remove(struct platform_device *ofdev)
+{
+	struct ibm_iic_private *dev = platform_get_drvdata(ofdev);
+
+	i2c_del_adapter(&dev->adap);
+
+	if (dev->irq) {
+		iic_interrupt_mode(dev, 0);
+		free_irq(dev->irq, dev);
+	}
+
+	iounmap(dev->vaddr);
+	kfree(dev);
+
+	return 0;
+}
+
+static const struct of_device_id ibm_iic_match[] = {
+	{ .compatible = "ibm,iic", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ibm_iic_match);
+
+static struct platform_driver ibm_iic_driver = {
+	.driver = {
+		.name = "ibm-iic",
+		.of_match_table = ibm_iic_match,
+	},
+	.probe	= iic_probe,
+	.remove	= iic_remove,
+};
+
+module_platform_driver(ibm_iic_driver);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.h
new file mode 100644
index 0000000..fdaa482
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ibm_iic.h
@@ -0,0 +1,123 @@
+/*
+ * drivers/i2c/busses/i2c-ibm_iic.h
+ *
+ * Support for the IIC peripheral on IBM PPC 4xx
+ *
+ * Copyright (c) 2003 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * 	Ian DaSilva  <idasilva@mvista.com>
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Matt Porter  <mporter@mvista.com>
+ *
+ *      Copyright 2000-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __I2C_IBM_IIC_H_
+#define __I2C_IBM_IIC_H_
+
+#include <linux/i2c.h>
+
+struct iic_regs {
+	u16 mdbuf;
+	u16 sbbuf;
+	u8 lmadr;
+	u8 hmadr;
+	u8 cntl;
+	u8 mdcntl;
+	u8 sts;
+	u8 extsts;
+	u8 lsadr;
+	u8 hsadr;
+	u8 clkdiv;
+	u8 intmsk;
+	u8 xfrcnt;
+	u8 xtcntlss;
+	u8 directcntl;
+};
+
+struct ibm_iic_private {
+	struct i2c_adapter adap;
+	volatile struct iic_regs __iomem *vaddr;
+	wait_queue_head_t wq;
+	int idx;
+	int irq;
+	int fast_mode;
+	u8  clckdiv;
+};
+
+/* IICx_CNTL register */
+#define CNTL_HMT	0x80
+#define CNTL_AMD	0x40
+#define CNTL_TCT_MASK	0x30
+#define CNTL_TCT_SHIFT	4
+#define CNTL_RPST	0x08
+#define CNTL_CHT	0x04
+#define CNTL_RW		0x02
+#define CNTL_PT		0x01
+
+/* IICx_MDCNTL register */
+#define MDCNTL_FSDB	0x80
+#define MDCNTL_FMDB	0x40
+#define MDCNTL_EGC	0x20
+#define MDCNTL_FSM	0x10
+#define MDCNTL_ESM	0x08
+#define MDCNTL_EINT	0x04
+#define MDCNTL_EUBS	0x02
+#define MDCNTL_HSCL	0x01
+
+/* IICx_STS register */
+#define STS_SSS		0x80
+#define STS_SLPR	0x40
+#define STS_MDBS	0x20
+#define STS_MDBF	0x10
+#define STS_SCMP	0x08
+#define STS_ERR		0x04
+#define STS_IRQA	0x02
+#define STS_PT		0x01
+
+/* IICx_EXTSTS register */
+#define EXTSTS_IRQP	0x80
+#define EXTSTS_BCS_MASK	0x70
+#define   EXTSTS_BCS_FREE  0x40
+#define EXTSTS_IRQD	0x08
+#define EXTSTS_LA	0x04
+#define EXTSTS_ICT	0x02
+#define EXTSTS_XFRA	0x01
+
+/* IICx_INTRMSK register */
+#define INTRMSK_EIRC	0x80
+#define INTRMSK_EIRS	0x40
+#define INTRMSK_EIWC	0x20
+#define INTRMSK_EIWS	0x10
+#define INTRMSK_EIHE	0x08
+#define INTRMSK_EIIC	0x04
+#define INTRMSK_EITA	0x02
+#define INTRMSK_EIMTC	0x01
+
+/* IICx_XFRCNT register */
+#define XFRCNT_MTC_MASK	0x07
+
+/* IICx_XTCNTLSS register */
+#define XTCNTLSS_SRC	0x80
+#define XTCNTLSS_SRS	0x40
+#define XTCNTLSS_SWC	0x20
+#define XTCNTLSS_SWS	0x10
+#define XTCNTLSS_SRST	0x01
+
+/* IICx_DIRECTCNTL register */
+#define DIRCNTL_SDAC	0x08
+#define DIRCNTL_SCC	0x04
+#define DIRCNTL_MSDA	0x02
+#define DIRCNTL_MSC	0x01
+
+/* Check if we really control the I2C bus and bus is free */
+#define DIRCTNL_FREE(v)	(((v) & 0x0f) == 0x0f)
+
+#endif /* __I2C_IBM_IIC_H_ */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-img-scb.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-img-scb.c
new file mode 100644
index 0000000..eb1d91b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-img-scb.c
@@ -0,0 +1,1464 @@
+/*
+ * I2C adapter for the IMG Serial Control Bus (SCB) IP block.
+ *
+ * Copyright (C) 2009, 2010, 2012, 2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * There are three ways that this I2C controller can be driven:
+ *
+ * - Raw control of the SDA and SCK signals.
+ *
+ *   This corresponds to MODE_RAW, which takes control of the signals
+ *   directly for a certain number of clock cycles (the INT_TIMING
+ *   interrupt can be used for timing).
+ *
+ * - Atomic commands. A low level I2C symbol (such as generate
+ *   start/stop/ack/nack bit, generate byte, receive byte, and receive
+ *   ACK) is given to the hardware, with detection of completion by bits
+ *   in the LINESTAT register.
+ *
+ *   This mode of operation is used by MODE_ATOMIC, which uses an I2C
+ *   state machine in the interrupt handler to compose/react to I2C
+ *   transactions using atomic mode commands, and also by MODE_SEQUENCE,
+ *   which emits a simple fixed sequence of atomic mode commands.
+ *
+ *   Due to software control, the use of atomic commands usually results
+ *   in suboptimal use of the bus, with gaps between the I2C symbols while
+ *   the driver decides what to do next.
+ *
+ * - Automatic mode. A bus address, and whether to read/write is
+ *   specified, and the hardware takes care of the I2C state machine,
+ *   using a FIFO to send/receive bytes of data to an I2C slave. The
+ *   driver just has to keep the FIFO drained or filled in response to the
+ *   appropriate FIFO interrupts.
+ *
+ *   This corresponds to MODE_AUTOMATIC, which manages the FIFOs and deals
+ *   with control of repeated start bits between I2C messages.
+ *
+ *   Use of automatic mode and the FIFO can make much more efficient use
+ *   of the bus compared to individual atomic commands, with potentially
+ *   no wasted time between I2C symbols or I2C messages.
+ *
+ * In most cases MODE_AUTOMATIC is used, however if any of the messages in
+ * a transaction are zero byte writes (e.g. used by i2cdetect for probing
+ * the bus), MODE_ATOMIC must be used since automatic mode is normally
+ * started by the writing of data into the FIFO.
+ *
+ * The other modes are used in specific circumstances where MODE_ATOMIC and
+ * MODE_AUTOMATIC aren't appropriate. MODE_RAW is used to implement a bus
+ * recovery routine. MODE_SEQUENCE is used to reset the bus and make sure
+ * it is in a sane state.
+ *
+ * Notice that the driver implements a timer-based timeout mechanism.
+ * The reason for this mechanism is to reduce the number of interrupts
+ * received in automatic mode.
+ *
+ * The driver would get a slave event and transaction done interrupts for
+ * each atomic mode command that gets completed. However, these events are
+ * not needed in automatic mode, becase those atomic mode commands are
+ * managed automatically by the hardware.
+ *
+ * In practice, normal I2C transactions will be complete well before you
+ * get the timer interrupt, as the timer is re-scheduled during FIFO
+ * maintenance and disabled after the transaction is complete.
+ *
+ * In this way normal automatic mode operation isn't impacted by
+ * unnecessary interrupts, but the exceptional abort condition can still be
+ * detected (with a slight delay).
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+
+/* Register offsets */
+
+#define SCB_STATUS_REG			0x00
+#define SCB_OVERRIDE_REG		0x04
+#define SCB_READ_ADDR_REG		0x08
+#define SCB_READ_COUNT_REG		0x0c
+#define SCB_WRITE_ADDR_REG		0x10
+#define SCB_READ_DATA_REG		0x14
+#define SCB_WRITE_DATA_REG		0x18
+#define SCB_FIFO_STATUS_REG		0x1c
+#define SCB_CONTROL_SOFT_RESET		0x1f
+#define SCB_CLK_SET_REG			0x3c
+#define SCB_INT_STATUS_REG		0x40
+#define SCB_INT_CLEAR_REG		0x44
+#define SCB_INT_MASK_REG		0x48
+#define SCB_CONTROL_REG			0x4c
+#define SCB_TIME_TPL_REG		0x50
+#define SCB_TIME_TPH_REG		0x54
+#define SCB_TIME_TP2S_REG		0x58
+#define SCB_TIME_TBI_REG		0x60
+#define SCB_TIME_TSL_REG		0x64
+#define SCB_TIME_TDL_REG		0x68
+#define SCB_TIME_TSDL_REG		0x6c
+#define SCB_TIME_TSDH_REG		0x70
+#define SCB_READ_XADDR_REG		0x74
+#define SCB_WRITE_XADDR_REG		0x78
+#define SCB_WRITE_COUNT_REG		0x7c
+#define SCB_CORE_REV_REG		0x80
+#define SCB_TIME_TCKH_REG		0x84
+#define SCB_TIME_TCKL_REG		0x88
+#define SCB_FIFO_FLUSH_REG		0x8c
+#define SCB_READ_FIFO_REG		0x94
+#define SCB_CLEAR_REG			0x98
+
+/* SCB_CONTROL_REG bits */
+
+#define SCB_CONTROL_CLK_ENABLE		0x1e0
+#define SCB_CONTROL_TRANSACTION_HALT	0x200
+
+#define FIFO_READ_FULL			BIT(0)
+#define FIFO_READ_EMPTY			BIT(1)
+#define FIFO_WRITE_FULL			BIT(2)
+#define FIFO_WRITE_EMPTY		BIT(3)
+
+/* SCB_CLK_SET_REG bits */
+#define SCB_FILT_DISABLE		BIT(31)
+#define SCB_FILT_BYPASS			BIT(30)
+#define SCB_FILT_INC_MASK		0x7f
+#define SCB_FILT_INC_SHIFT		16
+#define SCB_INC_MASK			0x7f
+#define SCB_INC_SHIFT			8
+
+/* SCB_INT_*_REG bits */
+
+#define INT_BUS_INACTIVE		BIT(0)
+#define INT_UNEXPECTED_START		BIT(1)
+#define INT_SCLK_LOW_TIMEOUT		BIT(2)
+#define INT_SDAT_LOW_TIMEOUT		BIT(3)
+#define INT_WRITE_ACK_ERR		BIT(4)
+#define INT_ADDR_ACK_ERR		BIT(5)
+#define INT_FIFO_FULL			BIT(9)
+#define INT_FIFO_FILLING		BIT(10)
+#define INT_FIFO_EMPTY			BIT(11)
+#define INT_FIFO_EMPTYING		BIT(12)
+#define INT_TRANSACTION_DONE		BIT(15)
+#define INT_SLAVE_EVENT			BIT(16)
+#define INT_MASTER_HALTED		BIT(17)
+#define INT_TIMING			BIT(18)
+#define INT_STOP_DETECTED		BIT(19)
+
+#define INT_FIFO_FULL_FILLING	(INT_FIFO_FULL  | INT_FIFO_FILLING)
+
+/* Level interrupts need clearing after handling instead of before */
+#define INT_LEVEL			0x01e00
+
+/* Don't allow any interrupts while the clock may be off */
+#define INT_ENABLE_MASK_INACTIVE	0x00000
+
+/* Interrupt masks for the different driver modes */
+
+#define INT_ENABLE_MASK_RAW		INT_TIMING
+
+#define INT_ENABLE_MASK_ATOMIC		(INT_TRANSACTION_DONE | \
+					 INT_SLAVE_EVENT      | \
+					 INT_ADDR_ACK_ERR     | \
+					 INT_WRITE_ACK_ERR)
+
+#define INT_ENABLE_MASK_AUTOMATIC	(INT_SCLK_LOW_TIMEOUT | \
+					 INT_ADDR_ACK_ERR     | \
+					 INT_WRITE_ACK_ERR    | \
+					 INT_FIFO_FULL        | \
+					 INT_FIFO_FILLING     | \
+					 INT_FIFO_EMPTY       | \
+					 INT_MASTER_HALTED    | \
+					 INT_STOP_DETECTED)
+
+#define INT_ENABLE_MASK_WAITSTOP	(INT_SLAVE_EVENT      | \
+					 INT_ADDR_ACK_ERR     | \
+					 INT_WRITE_ACK_ERR)
+
+/* SCB_STATUS_REG fields */
+
+#define LINESTAT_SCLK_LINE_STATUS	BIT(0)
+#define LINESTAT_SCLK_EN		BIT(1)
+#define LINESTAT_SDAT_LINE_STATUS	BIT(2)
+#define LINESTAT_SDAT_EN		BIT(3)
+#define LINESTAT_DET_START_STATUS	BIT(4)
+#define LINESTAT_DET_STOP_STATUS	BIT(5)
+#define LINESTAT_DET_ACK_STATUS		BIT(6)
+#define LINESTAT_DET_NACK_STATUS	BIT(7)
+#define LINESTAT_BUS_IDLE		BIT(8)
+#define LINESTAT_T_DONE_STATUS		BIT(9)
+#define LINESTAT_SCLK_OUT_STATUS	BIT(10)
+#define LINESTAT_SDAT_OUT_STATUS	BIT(11)
+#define LINESTAT_GEN_LINE_MASK_STATUS	BIT(12)
+#define LINESTAT_START_BIT_DET		BIT(13)
+#define LINESTAT_STOP_BIT_DET		BIT(14)
+#define LINESTAT_ACK_DET		BIT(15)
+#define LINESTAT_NACK_DET		BIT(16)
+#define LINESTAT_INPUT_HELD_V		BIT(17)
+#define LINESTAT_ABORT_DET		BIT(18)
+#define LINESTAT_ACK_OR_NACK_DET	(LINESTAT_ACK_DET | LINESTAT_NACK_DET)
+#define LINESTAT_INPUT_DATA		0xff000000
+#define LINESTAT_INPUT_DATA_SHIFT	24
+
+#define LINESTAT_CLEAR_SHIFT		13
+#define LINESTAT_LATCHED		(0x3f << LINESTAT_CLEAR_SHIFT)
+
+/* SCB_OVERRIDE_REG fields */
+
+#define OVERRIDE_SCLK_OVR		BIT(0)
+#define OVERRIDE_SCLKEN_OVR		BIT(1)
+#define OVERRIDE_SDAT_OVR		BIT(2)
+#define OVERRIDE_SDATEN_OVR		BIT(3)
+#define OVERRIDE_MASTER			BIT(9)
+#define OVERRIDE_LINE_OVR_EN		BIT(10)
+#define OVERRIDE_DIRECT			BIT(11)
+#define OVERRIDE_CMD_SHIFT		4
+#define OVERRIDE_CMD_MASK		0x1f
+#define OVERRIDE_DATA_SHIFT		24
+
+#define OVERRIDE_SCLK_DOWN		(OVERRIDE_LINE_OVR_EN | \
+					 OVERRIDE_SCLKEN_OVR)
+#define OVERRIDE_SCLK_UP		(OVERRIDE_LINE_OVR_EN | \
+					 OVERRIDE_SCLKEN_OVR | \
+					 OVERRIDE_SCLK_OVR)
+#define OVERRIDE_SDAT_DOWN		(OVERRIDE_LINE_OVR_EN | \
+					 OVERRIDE_SDATEN_OVR)
+#define OVERRIDE_SDAT_UP		(OVERRIDE_LINE_OVR_EN | \
+					 OVERRIDE_SDATEN_OVR | \
+					 OVERRIDE_SDAT_OVR)
+
+/* OVERRIDE_CMD values */
+
+#define CMD_PAUSE			0x00
+#define CMD_GEN_DATA			0x01
+#define CMD_GEN_START			0x02
+#define CMD_GEN_STOP			0x03
+#define CMD_GEN_ACK			0x04
+#define CMD_GEN_NACK			0x05
+#define CMD_RET_DATA			0x08
+#define CMD_RET_ACK			0x09
+
+/* Fixed timing values */
+
+#define TIMEOUT_TBI			0x0
+#define TIMEOUT_TSL			0xffff
+#define TIMEOUT_TDL			0x0
+
+/* Transaction timeout */
+
+#define IMG_I2C_TIMEOUT			(msecs_to_jiffies(1000))
+
+/*
+ * Worst incs are 1 (innacurate) and 16*256 (irregular).
+ * So a sensible inc is the logarithmic mean: 64 (2^6), which is
+ * in the middle of the valid range (0-127).
+ */
+#define SCB_OPT_INC		64
+
+/* Setup the clock enable filtering for 25 ns */
+#define SCB_FILT_GLITCH		25
+
+/*
+ * Bits to return from interrupt handler functions for different modes.
+ * This delays completion until we've finished with the registers, so that the
+ * function waiting for completion can safely disable the clock to save power.
+ */
+#define ISR_COMPLETE_M		BIT(31)
+#define ISR_FATAL_M		BIT(30)
+#define ISR_WAITSTOP		BIT(29)
+#define ISR_STATUS_M		0x0000ffff	/* contains +ve errno */
+#define ISR_COMPLETE(err)	(ISR_COMPLETE_M | (ISR_STATUS_M & (err)))
+#define ISR_FATAL(err)		(ISR_COMPLETE(err) | ISR_FATAL_M)
+
+enum img_i2c_mode {
+	MODE_INACTIVE,
+	MODE_RAW,
+	MODE_ATOMIC,
+	MODE_AUTOMATIC,
+	MODE_SEQUENCE,
+	MODE_FATAL,
+	MODE_WAITSTOP,
+	MODE_SUSPEND,
+};
+
+/* Timing parameters for i2c modes (in ns) */
+struct img_i2c_timings {
+	const char *name;
+	unsigned int max_bitrate;
+	unsigned int tckh, tckl, tsdh, tsdl;
+	unsigned int tp2s, tpl, tph;
+};
+
+/* The timings array must be ordered from slower to faster */
+static struct img_i2c_timings timings[] = {
+	/* Standard mode */
+	{
+		.name = "standard",
+		.max_bitrate = 100000,
+		.tckh = 4000,
+		.tckl = 4700,
+		.tsdh = 4700,
+		.tsdl = 8700,
+		.tp2s = 4700,
+		.tpl = 4700,
+		.tph = 4000,
+	},
+	/* Fast mode */
+	{
+		.name = "fast",
+		.max_bitrate = 400000,
+		.tckh = 600,
+		.tckl = 1300,
+		.tsdh = 600,
+		.tsdl = 1200,
+		.tp2s = 1300,
+		.tpl = 600,
+		.tph = 600,
+	},
+};
+
+/* Reset dance */
+static u8 img_i2c_reset_seq[] = { CMD_GEN_START,
+				  CMD_GEN_DATA, 0xff,
+				  CMD_RET_ACK,
+				  CMD_GEN_START,
+				  CMD_GEN_STOP,
+				  0 };
+/* Just issue a stop (after an abort condition) */
+static u8 img_i2c_stop_seq[] = {  CMD_GEN_STOP,
+				  0 };
+
+/* We're interested in different interrupts depending on the mode */
+static unsigned int img_i2c_int_enable_by_mode[] = {
+	[MODE_INACTIVE]  = INT_ENABLE_MASK_INACTIVE,
+	[MODE_RAW]       = INT_ENABLE_MASK_RAW,
+	[MODE_ATOMIC]    = INT_ENABLE_MASK_ATOMIC,
+	[MODE_AUTOMATIC] = INT_ENABLE_MASK_AUTOMATIC,
+	[MODE_SEQUENCE]  = INT_ENABLE_MASK_ATOMIC,
+	[MODE_FATAL]     = 0,
+	[MODE_WAITSTOP]  = INT_ENABLE_MASK_WAITSTOP,
+	[MODE_SUSPEND]   = 0,
+};
+
+/* Atomic command names */
+static const char * const img_i2c_atomic_cmd_names[] = {
+	[CMD_PAUSE]	= "PAUSE",
+	[CMD_GEN_DATA]	= "GEN_DATA",
+	[CMD_GEN_START]	= "GEN_START",
+	[CMD_GEN_STOP]	= "GEN_STOP",
+	[CMD_GEN_ACK]	= "GEN_ACK",
+	[CMD_GEN_NACK]	= "GEN_NACK",
+	[CMD_RET_DATA]	= "RET_DATA",
+	[CMD_RET_ACK]	= "RET_ACK",
+};
+
+struct img_i2c {
+	struct i2c_adapter adap;
+
+	void __iomem *base;
+
+	/*
+	 * The scb core clock is used to get the input frequency, and to disable
+	 * it after every set of transactions to save some power.
+	 */
+	struct clk *scb_clk, *sys_clk;
+	unsigned int bitrate;
+	bool need_wr_rd_fence;
+
+	/* state */
+	struct completion msg_complete;
+	spinlock_t lock;	/* lock before doing anything with the state */
+	struct i2c_msg msg;
+
+	/* After the last transaction, wait for a stop bit */
+	bool last_msg;
+	int msg_status;
+
+	enum img_i2c_mode mode;
+	u32 int_enable;		/* depends on mode */
+	u32 line_status;	/* line status over command */
+
+	/*
+	 * To avoid slave event interrupts in automatic mode, use a timer to
+	 * poll the abort condition if we don't get an interrupt for too long.
+	 */
+	struct timer_list check_timer;
+	bool t_halt;
+
+	/* atomic mode state */
+	bool at_t_done;
+	bool at_slave_event;
+	int at_cur_cmd;
+	u8 at_cur_data;
+
+	/* Sequence: either reset or stop. See img_i2c_sequence. */
+	u8 *seq;
+
+	/* raw mode */
+	unsigned int raw_timeout;
+};
+
+static void img_i2c_writel(struct img_i2c *i2c, u32 offset, u32 value)
+{
+	writel(value, i2c->base + offset);
+}
+
+static u32 img_i2c_readl(struct img_i2c *i2c, u32 offset)
+{
+	return readl(i2c->base + offset);
+}
+
+/*
+ * The code to read from the master read fifo, and write to the master
+ * write fifo, checks a bit in an SCB register before every byte to
+ * ensure that the fifo is not full (write fifo) or empty (read fifo).
+ * Due to clock domain crossing inside the SCB block the updated value
+ * of this bit is only visible after 2 cycles.
+ *
+ * The scb_wr_rd_fence() function does 2 dummy writes (to the read-only
+ * revision register), and it's called after reading from or writing to the
+ * fifos to ensure that subsequent reads of the fifo status bits do not read
+ * stale values.
+ */
+static void img_i2c_wr_rd_fence(struct img_i2c *i2c)
+{
+	if (i2c->need_wr_rd_fence) {
+		img_i2c_writel(i2c, SCB_CORE_REV_REG, 0);
+		img_i2c_writel(i2c, SCB_CORE_REV_REG, 0);
+	}
+}
+
+static void img_i2c_switch_mode(struct img_i2c *i2c, enum img_i2c_mode mode)
+{
+	i2c->mode = mode;
+	i2c->int_enable = img_i2c_int_enable_by_mode[mode];
+	i2c->line_status = 0;
+}
+
+static void img_i2c_raw_op(struct img_i2c *i2c)
+{
+	i2c->raw_timeout = 0;
+	img_i2c_writel(i2c, SCB_OVERRIDE_REG,
+		OVERRIDE_SCLKEN_OVR |
+		OVERRIDE_SDATEN_OVR |
+		OVERRIDE_MASTER |
+		OVERRIDE_LINE_OVR_EN |
+		OVERRIDE_DIRECT |
+		((i2c->at_cur_cmd & OVERRIDE_CMD_MASK) << OVERRIDE_CMD_SHIFT) |
+		(i2c->at_cur_data << OVERRIDE_DATA_SHIFT));
+}
+
+static const char *img_i2c_atomic_op_name(unsigned int cmd)
+{
+	if (unlikely(cmd >= ARRAY_SIZE(img_i2c_atomic_cmd_names)))
+		return "UNKNOWN";
+	return img_i2c_atomic_cmd_names[cmd];
+}
+
+/* Send a single atomic mode command to the hardware */
+static void img_i2c_atomic_op(struct img_i2c *i2c, int cmd, u8 data)
+{
+	i2c->at_cur_cmd = cmd;
+	i2c->at_cur_data = data;
+
+	/* work around lack of data setup time when generating data */
+	if (cmd == CMD_GEN_DATA && i2c->mode == MODE_ATOMIC) {
+		u32 line_status = img_i2c_readl(i2c, SCB_STATUS_REG);
+
+		if (line_status & LINESTAT_SDAT_LINE_STATUS && !(data & 0x80)) {
+			/* hold the data line down for a moment */
+			img_i2c_switch_mode(i2c, MODE_RAW);
+			img_i2c_raw_op(i2c);
+			return;
+		}
+	}
+
+	dev_dbg(i2c->adap.dev.parent,
+		"atomic cmd=%s (%d) data=%#x\n",
+		img_i2c_atomic_op_name(cmd), cmd, data);
+	i2c->at_t_done = (cmd == CMD_RET_DATA || cmd == CMD_RET_ACK);
+	i2c->at_slave_event = false;
+	i2c->line_status = 0;
+
+	img_i2c_writel(i2c, SCB_OVERRIDE_REG,
+		((cmd & OVERRIDE_CMD_MASK) << OVERRIDE_CMD_SHIFT) |
+		OVERRIDE_MASTER |
+		OVERRIDE_DIRECT |
+		(data << OVERRIDE_DATA_SHIFT));
+}
+
+/* Start a transaction in atomic mode */
+static void img_i2c_atomic_start(struct img_i2c *i2c)
+{
+	img_i2c_switch_mode(i2c, MODE_ATOMIC);
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+	img_i2c_atomic_op(i2c, CMD_GEN_START, 0x00);
+}
+
+static void img_i2c_soft_reset(struct img_i2c *i2c)
+{
+	i2c->t_halt = false;
+	img_i2c_writel(i2c, SCB_CONTROL_REG, 0);
+	img_i2c_writel(i2c, SCB_CONTROL_REG,
+		       SCB_CONTROL_CLK_ENABLE | SCB_CONTROL_SOFT_RESET);
+}
+
+/*
+ * Enable or release transaction halt for control of repeated starts.
+ * In version 3.3 of the IP when transaction halt is set, an interrupt
+ * will be generated after each byte of a transfer instead of after
+ * every transfer but before the stop bit.
+ * Due to this behaviour we have to be careful that every time we
+ * release the transaction halt we have to re-enable it straight away
+ * so that we only process a single byte, not doing so will result in
+ * all remaining bytes been processed and a stop bit being issued,
+ * which will prevent us having a repeated start.
+ */
+static void img_i2c_transaction_halt(struct img_i2c *i2c, bool t_halt)
+{
+	u32 val;
+
+	if (i2c->t_halt == t_halt)
+		return;
+	i2c->t_halt = t_halt;
+	val = img_i2c_readl(i2c, SCB_CONTROL_REG);
+	if (t_halt)
+		val |= SCB_CONTROL_TRANSACTION_HALT;
+	else
+		val &= ~SCB_CONTROL_TRANSACTION_HALT;
+	img_i2c_writel(i2c, SCB_CONTROL_REG, val);
+}
+
+/* Drain data from the FIFO into the buffer (automatic mode) */
+static void img_i2c_read_fifo(struct img_i2c *i2c)
+{
+	while (i2c->msg.len) {
+		u32 fifo_status;
+		u8 data;
+
+		img_i2c_wr_rd_fence(i2c);
+		fifo_status = img_i2c_readl(i2c, SCB_FIFO_STATUS_REG);
+		if (fifo_status & FIFO_READ_EMPTY)
+			break;
+
+		data = img_i2c_readl(i2c, SCB_READ_DATA_REG);
+		*i2c->msg.buf = data;
+
+		img_i2c_writel(i2c, SCB_READ_FIFO_REG, 0xff);
+		i2c->msg.len--;
+		i2c->msg.buf++;
+	}
+}
+
+/* Fill the FIFO with data from the buffer (automatic mode) */
+static void img_i2c_write_fifo(struct img_i2c *i2c)
+{
+	while (i2c->msg.len) {
+		u32 fifo_status;
+
+		img_i2c_wr_rd_fence(i2c);
+		fifo_status = img_i2c_readl(i2c, SCB_FIFO_STATUS_REG);
+		if (fifo_status & FIFO_WRITE_FULL)
+			break;
+
+		img_i2c_writel(i2c, SCB_WRITE_DATA_REG, *i2c->msg.buf);
+		i2c->msg.len--;
+		i2c->msg.buf++;
+	}
+
+	/* Disable fifo emptying interrupt if nothing more to write */
+	if (!i2c->msg.len)
+		i2c->int_enable &= ~INT_FIFO_EMPTYING;
+}
+
+/* Start a read transaction in automatic mode */
+static void img_i2c_read(struct img_i2c *i2c)
+{
+	img_i2c_switch_mode(i2c, MODE_AUTOMATIC);
+	if (!i2c->last_msg)
+		i2c->int_enable |= INT_SLAVE_EVENT;
+
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+	img_i2c_writel(i2c, SCB_READ_ADDR_REG, i2c->msg.addr);
+	img_i2c_writel(i2c, SCB_READ_COUNT_REG, i2c->msg.len);
+
+	mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1));
+}
+
+/* Start a write transaction in automatic mode */
+static void img_i2c_write(struct img_i2c *i2c)
+{
+	img_i2c_switch_mode(i2c, MODE_AUTOMATIC);
+	if (!i2c->last_msg)
+		i2c->int_enable |= INT_SLAVE_EVENT;
+
+	img_i2c_writel(i2c, SCB_WRITE_ADDR_REG, i2c->msg.addr);
+	img_i2c_writel(i2c, SCB_WRITE_COUNT_REG, i2c->msg.len);
+
+	mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1));
+	img_i2c_write_fifo(i2c);
+
+	/* img_i2c_write_fifo() may modify int_enable */
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+}
+
+/*
+ * Indicate that the transaction is complete. This is called from the
+ * ISR to wake up the waiting thread, after which the ISR must not
+ * access any more SCB registers.
+ */
+static void img_i2c_complete_transaction(struct img_i2c *i2c, int status)
+{
+	img_i2c_switch_mode(i2c, MODE_INACTIVE);
+	if (status) {
+		i2c->msg_status = status;
+		img_i2c_transaction_halt(i2c, false);
+	}
+	complete(&i2c->msg_complete);
+}
+
+static unsigned int img_i2c_raw_atomic_delay_handler(struct img_i2c *i2c,
+					u32 int_status, u32 line_status)
+{
+	/* Stay in raw mode for this, so we don't just loop infinitely */
+	img_i2c_atomic_op(i2c, i2c->at_cur_cmd, i2c->at_cur_data);
+	img_i2c_switch_mode(i2c, MODE_ATOMIC);
+	return 0;
+}
+
+static unsigned int img_i2c_raw(struct img_i2c *i2c, u32 int_status,
+				u32 line_status)
+{
+	if (int_status & INT_TIMING) {
+		if (i2c->raw_timeout == 0)
+			return img_i2c_raw_atomic_delay_handler(i2c,
+				int_status, line_status);
+		--i2c->raw_timeout;
+	}
+	return 0;
+}
+
+static unsigned int img_i2c_sequence(struct img_i2c *i2c, u32 int_status)
+{
+	static const unsigned int continue_bits[] = {
+		[CMD_GEN_START] = LINESTAT_START_BIT_DET,
+		[CMD_GEN_DATA]  = LINESTAT_INPUT_HELD_V,
+		[CMD_RET_ACK]   = LINESTAT_ACK_DET | LINESTAT_NACK_DET,
+		[CMD_RET_DATA]  = LINESTAT_INPUT_HELD_V,
+		[CMD_GEN_STOP]  = LINESTAT_STOP_BIT_DET,
+	};
+	int next_cmd = -1;
+	u8 next_data = 0x00;
+
+	if (int_status & INT_SLAVE_EVENT)
+		i2c->at_slave_event = true;
+	if (int_status & INT_TRANSACTION_DONE)
+		i2c->at_t_done = true;
+
+	if (!i2c->at_slave_event || !i2c->at_t_done)
+		return 0;
+
+	/* wait if no continue bits are set */
+	if (i2c->at_cur_cmd >= 0 &&
+	    i2c->at_cur_cmd < ARRAY_SIZE(continue_bits)) {
+		unsigned int cont_bits = continue_bits[i2c->at_cur_cmd];
+
+		if (cont_bits) {
+			cont_bits |= LINESTAT_ABORT_DET;
+			if (!(i2c->line_status & cont_bits))
+				return 0;
+		}
+	}
+
+	/* follow the sequence of commands in i2c->seq */
+	next_cmd = *i2c->seq;
+	/* stop on a nil */
+	if (!next_cmd) {
+		img_i2c_writel(i2c, SCB_OVERRIDE_REG, 0);
+		return ISR_COMPLETE(0);
+	}
+	/* when generating data, the next byte is the data */
+	if (next_cmd == CMD_GEN_DATA) {
+		++i2c->seq;
+		next_data = *i2c->seq;
+	}
+	++i2c->seq;
+	img_i2c_atomic_op(i2c, next_cmd, next_data);
+
+	return 0;
+}
+
+static void img_i2c_reset_start(struct img_i2c *i2c)
+{
+	/* Initiate the magic dance */
+	img_i2c_switch_mode(i2c, MODE_SEQUENCE);
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+	i2c->seq = img_i2c_reset_seq;
+	i2c->at_slave_event = true;
+	i2c->at_t_done = true;
+	i2c->at_cur_cmd = -1;
+
+	/* img_i2c_reset_seq isn't empty so the following won't fail */
+	img_i2c_sequence(i2c, 0);
+}
+
+static void img_i2c_stop_start(struct img_i2c *i2c)
+{
+	/* Initiate a stop bit sequence */
+	img_i2c_switch_mode(i2c, MODE_SEQUENCE);
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+	i2c->seq = img_i2c_stop_seq;
+	i2c->at_slave_event = true;
+	i2c->at_t_done = true;
+	i2c->at_cur_cmd = -1;
+
+	/* img_i2c_stop_seq isn't empty so the following won't fail */
+	img_i2c_sequence(i2c, 0);
+}
+
+static unsigned int img_i2c_atomic(struct img_i2c *i2c,
+				   u32 int_status,
+				   u32 line_status)
+{
+	int next_cmd = -1;
+	u8 next_data = 0x00;
+
+	if (int_status & INT_SLAVE_EVENT)
+		i2c->at_slave_event = true;
+	if (int_status & INT_TRANSACTION_DONE)
+		i2c->at_t_done = true;
+
+	if (!i2c->at_slave_event || !i2c->at_t_done)
+		goto next_atomic_cmd;
+	if (i2c->line_status & LINESTAT_ABORT_DET) {
+		dev_dbg(i2c->adap.dev.parent, "abort condition detected\n");
+		next_cmd = CMD_GEN_STOP;
+		i2c->msg_status = -EIO;
+		goto next_atomic_cmd;
+	}
+
+	/* i2c->at_cur_cmd may have completed */
+	switch (i2c->at_cur_cmd) {
+	case CMD_GEN_START:
+		next_cmd = CMD_GEN_DATA;
+		next_data = i2c_8bit_addr_from_msg(&i2c->msg);
+		break;
+	case CMD_GEN_DATA:
+		if (i2c->line_status & LINESTAT_INPUT_HELD_V)
+			next_cmd = CMD_RET_ACK;
+		break;
+	case CMD_RET_ACK:
+		if (i2c->line_status & LINESTAT_ACK_DET ||
+		    (i2c->line_status & LINESTAT_NACK_DET &&
+		    i2c->msg.flags & I2C_M_IGNORE_NAK)) {
+			if (i2c->msg.len == 0) {
+				next_cmd = CMD_GEN_STOP;
+			} else if (i2c->msg.flags & I2C_M_RD) {
+				next_cmd = CMD_RET_DATA;
+			} else {
+				next_cmd = CMD_GEN_DATA;
+				next_data = *i2c->msg.buf;
+				--i2c->msg.len;
+				++i2c->msg.buf;
+			}
+		} else if (i2c->line_status & LINESTAT_NACK_DET) {
+			i2c->msg_status = -EIO;
+			next_cmd = CMD_GEN_STOP;
+		}
+		break;
+	case CMD_RET_DATA:
+		if (i2c->line_status & LINESTAT_INPUT_HELD_V) {
+			*i2c->msg.buf = (i2c->line_status &
+						LINESTAT_INPUT_DATA)
+					>> LINESTAT_INPUT_DATA_SHIFT;
+			--i2c->msg.len;
+			++i2c->msg.buf;
+			if (i2c->msg.len)
+				next_cmd = CMD_GEN_ACK;
+			else
+				next_cmd = CMD_GEN_NACK;
+		}
+		break;
+	case CMD_GEN_ACK:
+		if (i2c->line_status & LINESTAT_ACK_DET) {
+			next_cmd = CMD_RET_DATA;
+		} else {
+			i2c->msg_status = -EIO;
+			next_cmd = CMD_GEN_STOP;
+		}
+		break;
+	case CMD_GEN_NACK:
+		next_cmd = CMD_GEN_STOP;
+		break;
+	case CMD_GEN_STOP:
+		img_i2c_writel(i2c, SCB_OVERRIDE_REG, 0);
+		return ISR_COMPLETE(0);
+	default:
+		dev_err(i2c->adap.dev.parent, "bad atomic command %d\n",
+			i2c->at_cur_cmd);
+		i2c->msg_status = -EIO;
+		next_cmd = CMD_GEN_STOP;
+		break;
+	}
+
+next_atomic_cmd:
+	if (next_cmd != -1) {
+		/* don't actually stop unless we're the last transaction */
+		if (next_cmd == CMD_GEN_STOP && !i2c->msg_status &&
+						!i2c->last_msg)
+			return ISR_COMPLETE(0);
+		img_i2c_atomic_op(i2c, next_cmd, next_data);
+	}
+	return 0;
+}
+
+/*
+ * Timer function to check if something has gone wrong in automatic mode (so we
+ * don't have to handle so many interrupts just to catch an exception).
+ */
+static void img_i2c_check_timer(unsigned long arg)
+{
+	struct img_i2c *i2c = (struct img_i2c *)arg;
+	unsigned long flags;
+	unsigned int line_status;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	line_status = img_i2c_readl(i2c, SCB_STATUS_REG);
+
+	/* check for an abort condition */
+	if (line_status & LINESTAT_ABORT_DET) {
+		dev_dbg(i2c->adap.dev.parent,
+			"abort condition detected by check timer\n");
+		/* enable slave event interrupt mask to trigger irq */
+		img_i2c_writel(i2c, SCB_INT_MASK_REG,
+			       i2c->int_enable | INT_SLAVE_EVENT);
+	}
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+}
+
+static unsigned int img_i2c_auto(struct img_i2c *i2c,
+				 unsigned int int_status,
+				 unsigned int line_status)
+{
+	if (int_status & (INT_WRITE_ACK_ERR | INT_ADDR_ACK_ERR))
+		return ISR_COMPLETE(EIO);
+
+	if (line_status & LINESTAT_ABORT_DET) {
+		dev_dbg(i2c->adap.dev.parent, "abort condition detected\n");
+		/* empty the read fifo */
+		if ((i2c->msg.flags & I2C_M_RD) &&
+		    (int_status & INT_FIFO_FULL_FILLING))
+			img_i2c_read_fifo(i2c);
+		/* use atomic mode and try to force a stop bit */
+		i2c->msg_status = -EIO;
+		img_i2c_stop_start(i2c);
+		return 0;
+	}
+
+	/* Enable transaction halt on start bit */
+	if (!i2c->last_msg && line_status & LINESTAT_START_BIT_DET) {
+		img_i2c_transaction_halt(i2c, !i2c->last_msg);
+		/* we're no longer interested in the slave event */
+		i2c->int_enable &= ~INT_SLAVE_EVENT;
+	}
+
+	mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1));
+
+	if (int_status & INT_STOP_DETECTED) {
+		/* Drain remaining data in FIFO and complete transaction */
+		if (i2c->msg.flags & I2C_M_RD)
+			img_i2c_read_fifo(i2c);
+		return ISR_COMPLETE(0);
+	}
+
+	if (i2c->msg.flags & I2C_M_RD) {
+		if (int_status & (INT_FIFO_FULL_FILLING | INT_MASTER_HALTED)) {
+			img_i2c_read_fifo(i2c);
+			if (i2c->msg.len == 0)
+				return ISR_WAITSTOP;
+		}
+	} else {
+		if (int_status & (INT_FIFO_EMPTY | INT_MASTER_HALTED)) {
+			if ((int_status & INT_FIFO_EMPTY) &&
+			    i2c->msg.len == 0)
+				return ISR_WAITSTOP;
+			img_i2c_write_fifo(i2c);
+		}
+	}
+	if (int_status & INT_MASTER_HALTED) {
+		/*
+		 * Release and then enable transaction halt, to
+		 * allow only a single byte to proceed.
+		 */
+		img_i2c_transaction_halt(i2c, false);
+		img_i2c_transaction_halt(i2c, !i2c->last_msg);
+	}
+
+	return 0;
+}
+
+static irqreturn_t img_i2c_isr(int irq, void *dev_id)
+{
+	struct img_i2c *i2c = (struct img_i2c *)dev_id;
+	u32 int_status, line_status;
+	/* We handle transaction completion AFTER accessing registers */
+	unsigned int hret;
+
+	/* Read interrupt status register. */
+	int_status = img_i2c_readl(i2c, SCB_INT_STATUS_REG);
+	/* Clear detected interrupts. */
+	img_i2c_writel(i2c, SCB_INT_CLEAR_REG, int_status);
+
+	/*
+	 * Read line status and clear it until it actually is clear.  We have
+	 * to be careful not to lose any line status bits that get latched.
+	 */
+	line_status = img_i2c_readl(i2c, SCB_STATUS_REG);
+	if (line_status & LINESTAT_LATCHED) {
+		img_i2c_writel(i2c, SCB_CLEAR_REG,
+			      (line_status & LINESTAT_LATCHED)
+				>> LINESTAT_CLEAR_SHIFT);
+		img_i2c_wr_rd_fence(i2c);
+	}
+
+	spin_lock(&i2c->lock);
+
+	/* Keep track of line status bits received */
+	i2c->line_status &= ~LINESTAT_INPUT_DATA;
+	i2c->line_status |= line_status;
+
+	/*
+	 * Certain interrupts indicate that sclk low timeout is not
+	 * a problem. If any of these are set, just continue.
+	 */
+	if ((int_status & INT_SCLK_LOW_TIMEOUT) &&
+	    !(int_status & (INT_SLAVE_EVENT |
+			    INT_FIFO_EMPTY |
+			    INT_FIFO_FULL))) {
+		dev_crit(i2c->adap.dev.parent,
+			 "fatal: clock low timeout occurred %s addr 0x%02x\n",
+			 (i2c->msg.flags & I2C_M_RD) ? "reading" : "writing",
+			 i2c->msg.addr);
+		hret = ISR_FATAL(EIO);
+		goto out;
+	}
+
+	if (i2c->mode == MODE_ATOMIC)
+		hret = img_i2c_atomic(i2c, int_status, line_status);
+	else if (i2c->mode == MODE_AUTOMATIC)
+		hret = img_i2c_auto(i2c, int_status, line_status);
+	else if (i2c->mode == MODE_SEQUENCE)
+		hret = img_i2c_sequence(i2c, int_status);
+	else if (i2c->mode == MODE_WAITSTOP && (int_status & INT_SLAVE_EVENT) &&
+			 (line_status & LINESTAT_STOP_BIT_DET))
+		hret = ISR_COMPLETE(0);
+	else if (i2c->mode == MODE_RAW)
+		hret = img_i2c_raw(i2c, int_status, line_status);
+	else
+		hret = 0;
+
+	/* Clear detected level interrupts. */
+	img_i2c_writel(i2c, SCB_INT_CLEAR_REG, int_status & INT_LEVEL);
+
+out:
+	if (hret & ISR_WAITSTOP) {
+		/*
+		 * Only wait for stop on last message.
+		 * Also we may already have detected the stop bit.
+		 */
+		if (!i2c->last_msg || i2c->line_status & LINESTAT_STOP_BIT_DET)
+			hret = ISR_COMPLETE(0);
+		else
+			img_i2c_switch_mode(i2c, MODE_WAITSTOP);
+	}
+
+	/* now we've finished using regs, handle transaction completion */
+	if (hret & ISR_COMPLETE_M) {
+		int status = -(hret & ISR_STATUS_M);
+
+		img_i2c_complete_transaction(i2c, status);
+		if (hret & ISR_FATAL_M)
+			img_i2c_switch_mode(i2c, MODE_FATAL);
+	}
+
+	/* Enable interrupts (int_enable may be altered by changing mode) */
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+
+	spin_unlock(&i2c->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Force a bus reset sequence and wait for it to complete */
+static int img_i2c_reset_bus(struct img_i2c *i2c)
+{
+	unsigned long flags;
+	unsigned long time_left;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	reinit_completion(&i2c->msg_complete);
+	img_i2c_reset_start(i2c);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	time_left = wait_for_completion_timeout(&i2c->msg_complete,
+					      IMG_I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num)
+{
+	struct img_i2c *i2c = i2c_get_adapdata(adap);
+	bool atomic = false;
+	int i, ret;
+	unsigned long time_left;
+
+	if (i2c->mode == MODE_SUSPEND) {
+		WARN(1, "refusing to service transaction in suspended state\n");
+		return -EIO;
+	}
+
+	if (i2c->mode == MODE_FATAL)
+		return -EIO;
+
+	for (i = 0; i < num; i++) {
+		/*
+		 * 0 byte reads are not possible because the slave could try
+		 * and pull the data line low, preventing a stop bit.
+		 */
+		if (!msgs[i].len && msgs[i].flags & I2C_M_RD)
+			return -EIO;
+		/*
+		 * 0 byte writes are possible and used for probing, but we
+		 * cannot do them in automatic mode, so use atomic mode
+		 * instead.
+		 *
+		 * Also, the I2C_M_IGNORE_NAK mode can only be implemented
+		 * in atomic mode.
+		 */
+		if (!msgs[i].len ||
+		    (msgs[i].flags & I2C_M_IGNORE_NAK))
+			atomic = true;
+	}
+
+	ret = clk_prepare_enable(i2c->scb_clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		struct i2c_msg *msg = &msgs[i];
+		unsigned long flags;
+
+		spin_lock_irqsave(&i2c->lock, flags);
+
+		/*
+		 * Make a copy of the message struct. We mustn't modify the
+		 * original or we'll confuse drivers and i2c-dev.
+		 */
+		i2c->msg = *msg;
+		i2c->msg_status = 0;
+
+		/*
+		 * After the last message we must have waited for a stop bit.
+		 * Not waiting can cause problems when the clock is disabled
+		 * before the stop bit is sent, and the linux I2C interface
+		 * requires separate transfers not to joined with repeated
+		 * start.
+		 */
+		i2c->last_msg = (i == num - 1);
+		reinit_completion(&i2c->msg_complete);
+
+		/*
+		 * Clear line status and all interrupts before starting a
+		 * transfer, as we may have unserviced interrupts from
+		 * previous transfers that might be handled in the context
+		 * of the new transfer.
+		 */
+		img_i2c_writel(i2c, SCB_INT_CLEAR_REG, ~0);
+		img_i2c_writel(i2c, SCB_CLEAR_REG, ~0);
+
+		if (atomic) {
+			img_i2c_atomic_start(i2c);
+		} else {
+			/*
+			 * Enable transaction halt if not the last message in
+			 * the queue so that we can control repeated starts.
+			 */
+			img_i2c_transaction_halt(i2c, !i2c->last_msg);
+
+			if (msg->flags & I2C_M_RD)
+				img_i2c_read(i2c);
+			else
+				img_i2c_write(i2c);
+
+			/*
+			 * Release and then enable transaction halt, to
+			 * allow only a single byte to proceed.
+			 * This doesn't have an effect on the initial transfer
+			 * but will allow the following transfers to start
+			 * processing if the previous transfer was marked as
+			 * complete while the i2c block was halted.
+			 */
+			img_i2c_transaction_halt(i2c, false);
+			img_i2c_transaction_halt(i2c, !i2c->last_msg);
+		}
+		spin_unlock_irqrestore(&i2c->lock, flags);
+
+		time_left = wait_for_completion_timeout(&i2c->msg_complete,
+						      IMG_I2C_TIMEOUT);
+		del_timer_sync(&i2c->check_timer);
+
+		if (time_left == 0) {
+			dev_err(adap->dev.parent, "i2c transfer timed out\n");
+			i2c->msg_status = -ETIMEDOUT;
+			break;
+		}
+
+		if (i2c->msg_status)
+			break;
+	}
+
+	clk_disable_unprepare(i2c->scb_clk);
+
+	return i2c->msg_status ? i2c->msg_status : num;
+}
+
+static u32 img_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm img_i2c_algo = {
+	.master_xfer = img_i2c_xfer,
+	.functionality = img_i2c_func,
+};
+
+static int img_i2c_init(struct img_i2c *i2c)
+{
+	unsigned int clk_khz, bitrate_khz, clk_period, tckh, tckl, tsdh;
+	unsigned int i, ret, data, prescale, inc, int_bitrate, filt;
+	struct img_i2c_timings timing;
+	u32 rev;
+
+	ret = clk_prepare_enable(i2c->scb_clk);
+	if (ret)
+		return ret;
+
+	rev = img_i2c_readl(i2c, SCB_CORE_REV_REG);
+	if ((rev & 0x00ffffff) < 0x00020200) {
+		dev_info(i2c->adap.dev.parent,
+			 "Unknown hardware revision (%d.%d.%d.%d)\n",
+			 (rev >> 24) & 0xff, (rev >> 16) & 0xff,
+			 (rev >> 8) & 0xff, rev & 0xff);
+		clk_disable_unprepare(i2c->scb_clk);
+		return -EINVAL;
+	}
+
+	/* Fencing enabled by default. */
+	i2c->need_wr_rd_fence = true;
+
+	/* Determine what mode we're in from the bitrate */
+	timing = timings[0];
+	for (i = 0; i < ARRAY_SIZE(timings); i++) {
+		if (i2c->bitrate <= timings[i].max_bitrate) {
+			timing = timings[i];
+			break;
+		}
+	}
+	if (i2c->bitrate > timings[ARRAY_SIZE(timings) - 1].max_bitrate) {
+		dev_warn(i2c->adap.dev.parent,
+			 "requested bitrate (%u) is higher than the max bitrate supported (%u)\n",
+			 i2c->bitrate,
+			 timings[ARRAY_SIZE(timings) - 1].max_bitrate);
+		timing = timings[ARRAY_SIZE(timings) - 1];
+		i2c->bitrate = timing.max_bitrate;
+	}
+
+	bitrate_khz = i2c->bitrate / 1000;
+	clk_khz = clk_get_rate(i2c->scb_clk) / 1000;
+
+	/* Find the prescale that would give us that inc (approx delay = 0) */
+	prescale = SCB_OPT_INC * clk_khz / (256 * 16 * bitrate_khz);
+	prescale = clamp_t(unsigned int, prescale, 1, 8);
+	clk_khz /= prescale;
+
+	/* Setup the clock increment value */
+	inc = (256 * 16 * bitrate_khz) / clk_khz;
+
+	/*
+	 * The clock generation logic allows to filter glitches on the bus.
+	 * This filter is able to remove bus glitches shorter than 50ns.
+	 * If the clock enable rate is greater than 20 MHz, no filtering
+	 * is required, so we need to disable it.
+	 * If it's between the 20-40 MHz range, there's no need to divide
+	 * the clock to get a filter.
+	 */
+	if (clk_khz < 20000) {
+		filt = SCB_FILT_DISABLE;
+	} else if (clk_khz < 40000) {
+		filt = SCB_FILT_BYPASS;
+	} else {
+		/* Calculate filter clock */
+		filt = (64000 / ((clk_khz / 1000) * SCB_FILT_GLITCH));
+
+		/* Scale up if needed */
+		if (64000 % ((clk_khz / 1000) * SCB_FILT_GLITCH))
+			inc++;
+
+		if (filt > SCB_FILT_INC_MASK)
+			filt = SCB_FILT_INC_MASK;
+
+		filt = (filt & SCB_FILT_INC_MASK) << SCB_FILT_INC_SHIFT;
+	}
+	data = filt | ((inc & SCB_INC_MASK) << SCB_INC_SHIFT) | (prescale - 1);
+	img_i2c_writel(i2c, SCB_CLK_SET_REG, data);
+
+	/* Obtain the clock period of the fx16 clock in ns */
+	clk_period = (256 * 1000000) / (clk_khz * inc);
+
+	/* Calculate the bitrate in terms of internal clock pulses */
+	int_bitrate = 1000000 / (bitrate_khz * clk_period);
+	if ((1000000 % (bitrate_khz * clk_period)) >=
+	    ((bitrate_khz * clk_period) / 2))
+		int_bitrate++;
+
+	/*
+	 * Setup clock duty cycle, start with 50% and adjust TCKH and TCKL
+	 * values from there if they don't meet minimum timing requirements
+	 */
+	tckh = int_bitrate / 2;
+	tckl = int_bitrate - tckh;
+
+	/* Adjust TCKH and TCKL values */
+	data = DIV_ROUND_UP(timing.tckl, clk_period);
+
+	if (tckl < data) {
+		tckl = data;
+		tckh = int_bitrate - tckl;
+	}
+
+	if (tckh > 0)
+		--tckh;
+
+	if (tckl > 0)
+		--tckl;
+
+	img_i2c_writel(i2c, SCB_TIME_TCKH_REG, tckh);
+	img_i2c_writel(i2c, SCB_TIME_TCKL_REG, tckl);
+
+	/* Setup TSDH value */
+	tsdh = DIV_ROUND_UP(timing.tsdh, clk_period);
+
+	if (tsdh > 1)
+		data = tsdh - 1;
+	else
+		data = 0x01;
+	img_i2c_writel(i2c, SCB_TIME_TSDH_REG, data);
+
+	/* This value is used later */
+	tsdh = data;
+
+	/* Setup TPL value */
+	data = timing.tpl / clk_period;
+	if (data > 0)
+		--data;
+	img_i2c_writel(i2c, SCB_TIME_TPL_REG, data);
+
+	/* Setup TPH value */
+	data = timing.tph / clk_period;
+	if (data > 0)
+		--data;
+	img_i2c_writel(i2c, SCB_TIME_TPH_REG, data);
+
+	/* Setup TSDL value to TPL + TSDH + 2 */
+	img_i2c_writel(i2c, SCB_TIME_TSDL_REG, data + tsdh + 2);
+
+	/* Setup TP2S value */
+	data = timing.tp2s / clk_period;
+	if (data > 0)
+		--data;
+	img_i2c_writel(i2c, SCB_TIME_TP2S_REG, data);
+
+	img_i2c_writel(i2c, SCB_TIME_TBI_REG, TIMEOUT_TBI);
+	img_i2c_writel(i2c, SCB_TIME_TSL_REG, TIMEOUT_TSL);
+	img_i2c_writel(i2c, SCB_TIME_TDL_REG, TIMEOUT_TDL);
+
+	/* Take module out of soft reset and enable clocks */
+	img_i2c_soft_reset(i2c);
+
+	/* Disable all interrupts */
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, 0);
+
+	/* Clear all interrupts */
+	img_i2c_writel(i2c, SCB_INT_CLEAR_REG, ~0);
+
+	/* Clear the scb_line_status events */
+	img_i2c_writel(i2c, SCB_CLEAR_REG, ~0);
+
+	/* Enable interrupts */
+	img_i2c_writel(i2c, SCB_INT_MASK_REG, i2c->int_enable);
+
+	/* Perform a synchronous sequence to reset the bus */
+	ret = img_i2c_reset_bus(i2c);
+
+	clk_disable_unprepare(i2c->scb_clk);
+
+	return ret;
+}
+
+static int img_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct img_i2c *i2c;
+	struct resource *res;
+	int irq, ret;
+	u32 val;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct img_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "can't get irq number\n");
+		return irq;
+	}
+
+	i2c->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(i2c->sys_clk)) {
+		dev_err(&pdev->dev, "can't get system clock\n");
+		return PTR_ERR(i2c->sys_clk);
+	}
+
+	i2c->scb_clk = devm_clk_get(&pdev->dev, "scb");
+	if (IS_ERR(i2c->scb_clk)) {
+		dev_err(&pdev->dev, "can't get core clock\n");
+		return PTR_ERR(i2c->scb_clk);
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, img_i2c_isr, 0,
+			       pdev->name, i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "can't request irq %d\n", irq);
+		return ret;
+	}
+
+	/* Set up the exception check timer */
+	setup_timer(&i2c->check_timer, img_i2c_check_timer,
+		    (unsigned long)i2c);
+
+	i2c->bitrate = timings[0].max_bitrate;
+	if (!of_property_read_u32(node, "clock-frequency", &val))
+		i2c->bitrate = val;
+
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = node;
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &img_i2c_algo;
+	i2c->adap.retries = 5;
+	i2c->adap.nr = pdev->id;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "IMG SCB I2C");
+
+	img_i2c_switch_mode(i2c, MODE_INACTIVE);
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->msg_complete);
+
+	platform_set_drvdata(pdev, i2c);
+
+	ret = clk_prepare_enable(i2c->sys_clk);
+	if (ret)
+		return ret;
+
+	ret = img_i2c_init(i2c);
+	if (ret)
+		goto disable_clk;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret < 0)
+		goto disable_clk;
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(i2c->sys_clk);
+	return ret;
+}
+
+static int img_i2c_remove(struct platform_device *dev)
+{
+	struct img_i2c *i2c = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->sys_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int img_i2c_suspend(struct device *dev)
+{
+	struct img_i2c *i2c = dev_get_drvdata(dev);
+
+	img_i2c_switch_mode(i2c, MODE_SUSPEND);
+
+	clk_disable_unprepare(i2c->sys_clk);
+
+	return 0;
+}
+
+static int img_i2c_resume(struct device *dev)
+{
+	struct img_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(i2c->sys_clk);
+	if (ret)
+		return ret;
+
+	img_i2c_init(i2c);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(img_i2c_pm, img_i2c_suspend, img_i2c_resume);
+
+static const struct of_device_id img_scb_i2c_match[] = {
+	{ .compatible = "img,scb-i2c" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, img_scb_i2c_match);
+
+static struct platform_driver img_scb_i2c_driver = {
+	.driver = {
+		.name		= "img-i2c-scb",
+		.of_match_table	= img_scb_i2c_match,
+		.pm		= &img_i2c_pm,
+	},
+	.probe = img_i2c_probe,
+	.remove = img_i2c_remove,
+};
+module_platform_driver(img_scb_i2c_driver);
+
+MODULE_AUTHOR("James Hogan <jhogan@kernel.org>");
+MODULE_DESCRIPTION("IMG host I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx-lpi2c.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx-lpi2c.c
new file mode 100644
index 0000000..e86801a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -0,0 +1,672 @@
+/*
+ * This is i.MX low power i2c controller driver.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "imx-lpi2c"
+
+#define LPI2C_PARAM	0x04	/* i2c RX/TX FIFO size */
+#define LPI2C_MCR	0x10	/* i2c contrl register */
+#define LPI2C_MSR	0x14	/* i2c status register */
+#define LPI2C_MIER	0x18	/* i2c interrupt enable */
+#define LPI2C_MCFGR0	0x20	/* i2c master configuration */
+#define LPI2C_MCFGR1	0x24	/* i2c master configuration */
+#define LPI2C_MCFGR2	0x28	/* i2c master configuration */
+#define LPI2C_MCFGR3	0x2C	/* i2c master configuration */
+#define LPI2C_MCCR0	0x48	/* i2c master clk configuration */
+#define LPI2C_MCCR1	0x50	/* i2c master clk configuration */
+#define LPI2C_MFCR	0x58	/* i2c master FIFO control */
+#define LPI2C_MFSR	0x5C	/* i2c master FIFO status */
+#define LPI2C_MTDR	0x60	/* i2c master TX data register */
+#define LPI2C_MRDR	0x70	/* i2c master RX data register */
+
+/* i2c command */
+#define TRAN_DATA	0X00
+#define RECV_DATA	0X01
+#define GEN_STOP	0X02
+#define RECV_DISCARD	0X03
+#define GEN_START	0X04
+#define START_NACK	0X05
+#define START_HIGH	0X06
+#define START_HIGH_NACK	0X07
+
+#define MCR_MEN		BIT(0)
+#define MCR_RST		BIT(1)
+#define MCR_DOZEN	BIT(2)
+#define MCR_DBGEN	BIT(3)
+#define MCR_RTF		BIT(8)
+#define MCR_RRF		BIT(9)
+#define MSR_TDF		BIT(0)
+#define MSR_RDF		BIT(1)
+#define MSR_SDF		BIT(9)
+#define MSR_NDF		BIT(10)
+#define MSR_ALF		BIT(11)
+#define MSR_MBF		BIT(24)
+#define MSR_BBF		BIT(25)
+#define MIER_TDIE	BIT(0)
+#define MIER_RDIE	BIT(1)
+#define MIER_SDIE	BIT(9)
+#define MIER_NDIE	BIT(10)
+#define MCFGR1_AUTOSTOP	BIT(8)
+#define MCFGR1_IGNACK	BIT(9)
+#define MRDR_RXEMPTY	BIT(14)
+
+#define I2C_CLK_RATIO	2
+#define CHUNK_DATA	256
+
+#define LPI2C_DEFAULT_RATE	100000
+#define STARDARD_MAX_BITRATE	400000
+#define FAST_MAX_BITRATE	1000000
+#define FAST_PLUS_MAX_BITRATE	3400000
+#define HIGHSPEED_MAX_BITRATE	5000000
+
+enum lpi2c_imx_mode {
+	STANDARD,	/* 100+Kbps */
+	FAST,		/* 400+Kbps */
+	FAST_PLUS,	/* 1.0+Mbps */
+	HS,		/* 3.4+Mbps */
+	ULTRA_FAST,	/* 5.0+Mbps */
+};
+
+enum lpi2c_imx_pincfg {
+	TWO_PIN_OD,
+	TWO_PIN_OO,
+	TWO_PIN_PP,
+	FOUR_PIN_PP,
+};
+
+struct lpi2c_imx_struct {
+	struct i2c_adapter	adapter;
+	struct clk		*clk;
+	void __iomem		*base;
+	__u8			*rx_buf;
+	__u8			*tx_buf;
+	struct completion	complete;
+	unsigned int		msglen;
+	unsigned int		delivered;
+	unsigned int		block_data;
+	unsigned int		bitrate;
+	unsigned int		txfifosize;
+	unsigned int		rxfifosize;
+	enum lpi2c_imx_mode	mode;
+};
+
+static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
+			      unsigned int enable)
+{
+	writel(enable, lpi2c_imx->base + LPI2C_MIER);
+}
+
+static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned long orig_jiffies = jiffies;
+	unsigned int temp;
+
+	while (1) {
+		temp = readl(lpi2c_imx->base + LPI2C_MSR);
+
+		/* check for arbitration lost, clear if set */
+		if (temp & MSR_ALF) {
+			writel(temp, lpi2c_imx->base + LPI2C_MSR);
+			return -EAGAIN;
+		}
+
+		if (temp & (MSR_BBF | MSR_MBF))
+			break;
+
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
+			dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
+			return -ETIMEDOUT;
+		}
+		schedule();
+	}
+
+	return 0;
+}
+
+static void lpi2c_imx_set_mode(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned int bitrate = lpi2c_imx->bitrate;
+	enum lpi2c_imx_mode mode;
+
+	if (bitrate < STARDARD_MAX_BITRATE)
+		mode = STANDARD;
+	else if (bitrate < FAST_MAX_BITRATE)
+		mode = FAST;
+	else if (bitrate < FAST_PLUS_MAX_BITRATE)
+		mode = FAST_PLUS;
+	else if (bitrate < HIGHSPEED_MAX_BITRATE)
+		mode = HS;
+	else
+		mode = ULTRA_FAST;
+
+	lpi2c_imx->mode = mode;
+}
+
+static int lpi2c_imx_start(struct lpi2c_imx_struct *lpi2c_imx,
+			   struct i2c_msg *msgs)
+{
+	unsigned int temp;
+	u8 read;
+
+	temp = readl(lpi2c_imx->base + LPI2C_MCR);
+	temp |= MCR_RRF | MCR_RTF;
+	writel(temp, lpi2c_imx->base + LPI2C_MCR);
+	writel(0x7f00, lpi2c_imx->base + LPI2C_MSR);
+
+	read = msgs->flags & I2C_M_RD;
+	temp = (msgs->addr << 1 | read) | (GEN_START << 8);
+	writel(temp, lpi2c_imx->base + LPI2C_MTDR);
+
+	return lpi2c_imx_bus_busy(lpi2c_imx);
+}
+
+static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned long orig_jiffies = jiffies;
+	unsigned int temp;
+
+	writel(GEN_STOP << 8, lpi2c_imx->base + LPI2C_MTDR);
+
+	do {
+		temp = readl(lpi2c_imx->base + LPI2C_MSR);
+		if (temp & MSR_SDF)
+			break;
+
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
+			dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
+			break;
+		}
+		schedule();
+
+	} while (1);
+}
+
+/* CLKLO = I2C_CLK_RATIO * CLKHI, SETHOLD = CLKHI, DATAVD = CLKHI/2 */
+static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	u8 prescale, filt, sethold, clkhi, clklo, datavd;
+	unsigned int clk_rate, clk_cycle;
+	enum lpi2c_imx_pincfg pincfg;
+	unsigned int temp;
+
+	lpi2c_imx_set_mode(lpi2c_imx);
+
+	clk_rate = clk_get_rate(lpi2c_imx->clk);
+	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
+		filt = 0;
+	else
+		filt = 2;
+
+	for (prescale = 0; prescale <= 7; prescale++) {
+		clk_cycle = clk_rate / ((1 << prescale) * lpi2c_imx->bitrate)
+			    - 3 - (filt >> 1);
+		clkhi = (clk_cycle + I2C_CLK_RATIO) / (I2C_CLK_RATIO + 1);
+		clklo = clk_cycle - clkhi;
+		if (clklo < 64)
+			break;
+	}
+
+	if (prescale > 7)
+		return -EINVAL;
+
+	/* set MCFGR1: PINCFG, PRESCALE, IGNACK */
+	if (lpi2c_imx->mode == ULTRA_FAST)
+		pincfg = TWO_PIN_OO;
+	else
+		pincfg = TWO_PIN_OD;
+	temp = prescale | pincfg << 24;
+
+	if (lpi2c_imx->mode == ULTRA_FAST)
+		temp |= MCFGR1_IGNACK;
+
+	writel(temp, lpi2c_imx->base + LPI2C_MCFGR1);
+
+	/* set MCFGR2: FILTSDA, FILTSCL */
+	temp = (filt << 16) | (filt << 24);
+	writel(temp, lpi2c_imx->base + LPI2C_MCFGR2);
+
+	/* set MCCR: DATAVD, SETHOLD, CLKHI, CLKLO */
+	sethold = clkhi;
+	datavd = clkhi >> 1;
+	temp = datavd << 24 | sethold << 16 | clkhi << 8 | clklo;
+
+	if (lpi2c_imx->mode == HS)
+		writel(temp, lpi2c_imx->base + LPI2C_MCCR1);
+	else
+		writel(temp, lpi2c_imx->base + LPI2C_MCCR0);
+
+	return 0;
+}
+
+static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned int temp;
+	int ret;
+
+	ret = clk_enable(lpi2c_imx->clk);
+	if (ret)
+		return ret;
+
+	temp = MCR_RST;
+	writel(temp, lpi2c_imx->base + LPI2C_MCR);
+	writel(0, lpi2c_imx->base + LPI2C_MCR);
+
+	ret = lpi2c_imx_config(lpi2c_imx);
+	if (ret)
+		goto clk_disable;
+
+	temp = readl(lpi2c_imx->base + LPI2C_MCR);
+	temp |= MCR_MEN;
+	writel(temp, lpi2c_imx->base + LPI2C_MCR);
+
+	return 0;
+
+clk_disable:
+	clk_disable(lpi2c_imx->clk);
+
+	return ret;
+}
+
+static int lpi2c_imx_master_disable(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	u32 temp;
+
+	temp = readl(lpi2c_imx->base + LPI2C_MCR);
+	temp &= ~MCR_MEN;
+	writel(temp, lpi2c_imx->base + LPI2C_MCR);
+
+	clk_disable(lpi2c_imx->clk);
+
+	return 0;
+}
+
+static int lpi2c_imx_msg_complete(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned long timeout;
+
+	timeout = wait_for_completion_timeout(&lpi2c_imx->complete, HZ);
+
+	return timeout ? 0 : -ETIMEDOUT;
+}
+
+static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned long orig_jiffies = jiffies;
+	u32 txcnt;
+
+	do {
+		txcnt = readl(lpi2c_imx->base + LPI2C_MFSR) & 0xff;
+
+		if (readl(lpi2c_imx->base + LPI2C_MSR) & MSR_NDF) {
+			dev_dbg(&lpi2c_imx->adapter.dev, "NDF detected\n");
+			return -EIO;
+		}
+
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
+			dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
+			return -ETIMEDOUT;
+		}
+		schedule();
+
+	} while (txcnt);
+
+	return 0;
+}
+
+static void lpi2c_imx_set_tx_watermark(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	writel(lpi2c_imx->txfifosize >> 1, lpi2c_imx->base + LPI2C_MFCR);
+}
+
+static void lpi2c_imx_set_rx_watermark(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned int temp, remaining;
+
+	remaining = lpi2c_imx->msglen - lpi2c_imx->delivered;
+
+	if (remaining > (lpi2c_imx->rxfifosize >> 1))
+		temp = lpi2c_imx->rxfifosize >> 1;
+	else
+		temp = 0;
+
+	writel(temp << 16, lpi2c_imx->base + LPI2C_MFCR);
+}
+
+static void lpi2c_imx_write_txfifo(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned int data, txcnt;
+
+	txcnt = readl(lpi2c_imx->base + LPI2C_MFSR) & 0xff;
+
+	while (txcnt < lpi2c_imx->txfifosize) {
+		if (lpi2c_imx->delivered == lpi2c_imx->msglen)
+			break;
+
+		data = lpi2c_imx->tx_buf[lpi2c_imx->delivered++];
+		writel(data, lpi2c_imx->base + LPI2C_MTDR);
+		txcnt++;
+	}
+
+	if (lpi2c_imx->delivered < lpi2c_imx->msglen)
+		lpi2c_imx_intctrl(lpi2c_imx, MIER_TDIE | MIER_NDIE);
+	else
+		complete(&lpi2c_imx->complete);
+}
+
+static void lpi2c_imx_read_rxfifo(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	unsigned int blocklen, remaining;
+	unsigned int temp, data;
+
+	do {
+		data = readl(lpi2c_imx->base + LPI2C_MRDR);
+		if (data & MRDR_RXEMPTY)
+			break;
+
+		lpi2c_imx->rx_buf[lpi2c_imx->delivered++] = data & 0xff;
+	} while (1);
+
+	/*
+	 * First byte is the length of remaining packet in the SMBus block
+	 * data read. Add it to msgs->len.
+	 */
+	if (lpi2c_imx->block_data) {
+		blocklen = lpi2c_imx->rx_buf[0];
+		lpi2c_imx->msglen += blocklen;
+	}
+
+	remaining = lpi2c_imx->msglen - lpi2c_imx->delivered;
+
+	if (!remaining) {
+		complete(&lpi2c_imx->complete);
+		return;
+	}
+
+	/* not finished, still waiting for rx data */
+	lpi2c_imx_set_rx_watermark(lpi2c_imx);
+
+	/* multiple receive commands */
+	if (lpi2c_imx->block_data) {
+		lpi2c_imx->block_data = 0;
+		temp = remaining;
+		temp |= (RECV_DATA << 8);
+		writel(temp, lpi2c_imx->base + LPI2C_MTDR);
+	} else if (!(lpi2c_imx->delivered & 0xff)) {
+		temp = (remaining > CHUNK_DATA ? CHUNK_DATA : remaining) - 1;
+		temp |= (RECV_DATA << 8);
+		writel(temp, lpi2c_imx->base + LPI2C_MTDR);
+	}
+
+	lpi2c_imx_intctrl(lpi2c_imx, MIER_RDIE);
+}
+
+static void lpi2c_imx_write(struct lpi2c_imx_struct *lpi2c_imx,
+			    struct i2c_msg *msgs)
+{
+	lpi2c_imx->tx_buf = msgs->buf;
+	lpi2c_imx_set_tx_watermark(lpi2c_imx);
+	lpi2c_imx_write_txfifo(lpi2c_imx);
+}
+
+static void lpi2c_imx_read(struct lpi2c_imx_struct *lpi2c_imx,
+			   struct i2c_msg *msgs)
+{
+	unsigned int temp;
+
+	lpi2c_imx->rx_buf = msgs->buf;
+	lpi2c_imx->block_data = msgs->flags & I2C_M_RECV_LEN;
+
+	lpi2c_imx_set_rx_watermark(lpi2c_imx);
+	temp = msgs->len > CHUNK_DATA ? CHUNK_DATA - 1 : msgs->len - 1;
+	temp |= (RECV_DATA << 8);
+	writel(temp, lpi2c_imx->base + LPI2C_MTDR);
+
+	lpi2c_imx_intctrl(lpi2c_imx, MIER_RDIE | MIER_NDIE);
+}
+
+static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
+			  struct i2c_msg *msgs, int num)
+{
+	struct lpi2c_imx_struct *lpi2c_imx = i2c_get_adapdata(adapter);
+	unsigned int temp;
+	int i, result;
+
+	result = lpi2c_imx_master_enable(lpi2c_imx);
+	if (result)
+		return result;
+
+	for (i = 0; i < num; i++) {
+		result = lpi2c_imx_start(lpi2c_imx, &msgs[i]);
+		if (result)
+			goto disable;
+
+		/* quick smbus */
+		if (num == 1 && msgs[0].len == 0)
+			goto stop;
+
+		lpi2c_imx->delivered = 0;
+		lpi2c_imx->msglen = msgs[i].len;
+		init_completion(&lpi2c_imx->complete);
+
+		if (msgs[i].flags & I2C_M_RD)
+			lpi2c_imx_read(lpi2c_imx, &msgs[i]);
+		else
+			lpi2c_imx_write(lpi2c_imx, &msgs[i]);
+
+		result = lpi2c_imx_msg_complete(lpi2c_imx);
+		if (result)
+			goto stop;
+
+		if (!(msgs[i].flags & I2C_M_RD)) {
+			result = lpi2c_imx_txfifo_empty(lpi2c_imx);
+			if (result)
+				goto stop;
+		}
+	}
+
+stop:
+	lpi2c_imx_stop(lpi2c_imx);
+
+	temp = readl(lpi2c_imx->base + LPI2C_MSR);
+	if ((temp & MSR_NDF) && !result)
+		result = -EIO;
+
+disable:
+	lpi2c_imx_master_disable(lpi2c_imx);
+
+	dev_dbg(&lpi2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
+		(result < 0) ? "error" : "success msg",
+		(result < 0) ? result : num);
+
+	return (result < 0) ? result : num;
+}
+
+static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
+{
+	struct lpi2c_imx_struct *lpi2c_imx = dev_id;
+	unsigned int temp;
+
+	lpi2c_imx_intctrl(lpi2c_imx, 0);
+	temp = readl(lpi2c_imx->base + LPI2C_MSR);
+
+	if (temp & MSR_RDF)
+		lpi2c_imx_read_rxfifo(lpi2c_imx);
+
+	if (temp & MSR_TDF)
+		lpi2c_imx_write_txfifo(lpi2c_imx);
+
+	if (temp & MSR_NDF)
+		complete(&lpi2c_imx->complete);
+
+	return IRQ_HANDLED;
+}
+
+static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+		I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm lpi2c_imx_algo = {
+	.master_xfer	= lpi2c_imx_xfer,
+	.functionality	= lpi2c_imx_func,
+};
+
+static const struct of_device_id lpi2c_imx_of_match[] = {
+	{ .compatible = "fsl,imx7ulp-lpi2c" },
+	{ .compatible = "fsl,imx8dv-lpi2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match);
+
+static int lpi2c_imx_probe(struct platform_device *pdev)
+{
+	struct lpi2c_imx_struct *lpi2c_imx;
+	struct resource *res;
+	unsigned int temp;
+	int irq, ret;
+
+	lpi2c_imx = devm_kzalloc(&pdev->dev, sizeof(*lpi2c_imx), GFP_KERNEL);
+	if (!lpi2c_imx)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lpi2c_imx->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(lpi2c_imx->base))
+		return PTR_ERR(lpi2c_imx->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "can't get irq number\n");
+		return irq;
+	}
+
+	lpi2c_imx->adapter.owner	= THIS_MODULE;
+	lpi2c_imx->adapter.algo		= &lpi2c_imx_algo;
+	lpi2c_imx->adapter.dev.parent	= &pdev->dev;
+	lpi2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
+	strlcpy(lpi2c_imx->adapter.name, pdev->name,
+		sizeof(lpi2c_imx->adapter.name));
+
+	lpi2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lpi2c_imx->clk)) {
+		dev_err(&pdev->dev, "can't get I2C peripheral clock\n");
+		return PTR_ERR(lpi2c_imx->clk);
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "clock-frequency", &lpi2c_imx->bitrate);
+	if (ret)
+		lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE;
+
+	ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
+			       pdev->name, lpi2c_imx);
+	if (ret) {
+		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+		return ret;
+	}
+
+	i2c_set_adapdata(&lpi2c_imx->adapter, lpi2c_imx);
+	platform_set_drvdata(pdev, lpi2c_imx);
+
+	ret = clk_prepare_enable(lpi2c_imx->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk enable failed %d\n", ret);
+		return ret;
+	}
+
+	temp = readl(lpi2c_imx->base + LPI2C_PARAM);
+	lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
+	lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
+
+	clk_disable(lpi2c_imx->clk);
+
+	ret = i2c_add_adapter(&lpi2c_imx->adapter);
+	if (ret)
+		goto clk_unprepare;
+
+	dev_info(&lpi2c_imx->adapter.dev, "LPI2C adapter registered\n");
+
+	return 0;
+
+clk_unprepare:
+	clk_unprepare(lpi2c_imx->clk);
+
+	return ret;
+}
+
+static int lpi2c_imx_remove(struct platform_device *pdev)
+{
+	struct lpi2c_imx_struct *lpi2c_imx = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&lpi2c_imx->adapter);
+
+	clk_unprepare(lpi2c_imx->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpi2c_imx_suspend(struct device *dev)
+{
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int lpi2c_imx_resume(struct device *dev)
+{
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(imx_lpi2c_pm, lpi2c_imx_suspend, lpi2c_imx_resume);
+
+static struct platform_driver lpi2c_imx_driver = {
+	.probe = lpi2c_imx_probe,
+	.remove = lpi2c_imx_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = lpi2c_imx_of_match,
+		.pm = &imx_lpi2c_pm,
+	},
+};
+
+module_platform_driver(lpi2c_imx_driver);
+
+MODULE_AUTHOR("Gao Pan <pandy.gao@nxp.com>");
+MODULE_DESCRIPTION("I2C adapter driver for LPI2C bus");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c
new file mode 100644
index 0000000..26f8302
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-imx.c
@@ -0,0 +1,1263 @@
+/*
+ *	Copyright (C) 2002 Motorola GSG-China
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version 2
+ *	of the License, or (at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ * Author:
+ *	Darius Augulis, Teltonika Inc.
+ *
+ * Desc.:
+ *	Implementation of I2C Adapter/Algorithm Driver
+ *	for I2C Bus integrated in Freescale i.MX/MXC processors
+ *
+ *	Derived from Motorola GSG China I2C example driver
+ *
+ *	Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de
+ *	Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de
+ *	Copyright (C) 2007 RightHand Technologies, Inc.
+ *	Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
+ *
+ *	Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/i2c-imx.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "imx-i2c"
+
+/* Default value */
+#define IMX_I2C_BIT_RATE	100000	/* 100kHz */
+
+/*
+ * Enable DMA if transfer byte size is bigger than this threshold.
+ * As the hardware request, it must bigger than 4 bytes.\
+ * I have set '16' here, maybe it's not the best but I think it's
+ * the appropriate.
+ */
+#define DMA_THRESHOLD	16
+#define DMA_TIMEOUT	1000
+
+/* IMX I2C registers:
+ * the I2C register offset is different between SoCs,
+ * to provid support for all these chips, split the
+ * register offset into a fixed base address and a
+ * variable shift value, then the full register offset
+ * will be calculated by
+ * reg_off = ( reg_base_addr << reg_shift)
+ */
+#define IMX_I2C_IADR	0x00	/* i2c slave address */
+#define IMX_I2C_IFDR	0x01	/* i2c frequency divider */
+#define IMX_I2C_I2CR	0x02	/* i2c control */
+#define IMX_I2C_I2SR	0x03	/* i2c status */
+#define IMX_I2C_I2DR	0x04	/* i2c transfer data */
+
+#define IMX_I2C_REGSHIFT	2
+#define VF610_I2C_REGSHIFT	0
+
+/* Bits of IMX I2C registers */
+#define I2SR_RXAK	0x01
+#define I2SR_IIF	0x02
+#define I2SR_SRW	0x04
+#define I2SR_IAL	0x10
+#define I2SR_IBB	0x20
+#define I2SR_IAAS	0x40
+#define I2SR_ICF	0x80
+#define I2CR_DMAEN	0x02
+#define I2CR_RSTA	0x04
+#define I2CR_TXAK	0x08
+#define I2CR_MTX	0x10
+#define I2CR_MSTA	0x20
+#define I2CR_IIEN	0x40
+#define I2CR_IEN	0x80
+
+/* register bits different operating codes definition:
+ * 1) I2SR: Interrupt flags clear operation differ between SoCs:
+ * - write zero to clear(w0c) INT flag on i.MX,
+ * - but write one to clear(w1c) INT flag on Vybrid.
+ * 2) I2CR: I2C module enable operation also differ between SoCs:
+ * - set I2CR_IEN bit enable the module on i.MX,
+ * - but clear I2CR_IEN bit enable the module on Vybrid.
+ */
+#define I2SR_CLR_OPCODE_W0C	0x0
+#define I2SR_CLR_OPCODE_W1C	(I2SR_IAL | I2SR_IIF)
+#define I2CR_IEN_OPCODE_0	0x0
+#define I2CR_IEN_OPCODE_1	I2CR_IEN
+
+#define I2C_PM_TIMEOUT		10 /* ms */
+
+/*
+ * sorted list of clock divider, register value pairs
+ * taken from table 26-5, p.26-9, Freescale i.MX
+ * Integrated Portable System Processor Reference Manual
+ * Document Number: MC9328MXLRM, Rev. 5.1, 06/2007
+ *
+ * Duplicated divider values removed from list
+ */
+struct imx_i2c_clk_pair {
+	u16	div;
+	u16	val;
+};
+
+static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
+	{ 22,	0x20 }, { 24,	0x21 }, { 26,	0x22 }, { 28,	0x23 },
+	{ 30,	0x00 },	{ 32,	0x24 }, { 36,	0x25 }, { 40,	0x26 },
+	{ 42,	0x03 }, { 44,	0x27 },	{ 48,	0x28 }, { 52,	0x05 },
+	{ 56,	0x29 }, { 60,	0x06 }, { 64,	0x2A },	{ 72,	0x2B },
+	{ 80,	0x2C }, { 88,	0x09 }, { 96,	0x2D }, { 104,	0x0A },
+	{ 112,	0x2E }, { 128,	0x2F }, { 144,	0x0C }, { 160,	0x30 },
+	{ 192,	0x31 },	{ 224,	0x32 }, { 240,	0x0F }, { 256,	0x33 },
+	{ 288,	0x10 }, { 320,	0x34 },	{ 384,	0x35 }, { 448,	0x36 },
+	{ 480,	0x13 }, { 512,	0x37 }, { 576,	0x14 },	{ 640,	0x38 },
+	{ 768,	0x39 }, { 896,	0x3A }, { 960,	0x17 }, { 1024,	0x3B },
+	{ 1152,	0x18 }, { 1280,	0x3C }, { 1536,	0x3D }, { 1792,	0x3E },
+	{ 1920,	0x1B },	{ 2048,	0x3F }, { 2304,	0x1C }, { 2560,	0x1D },
+	{ 3072,	0x1E }, { 3840,	0x1F }
+};
+
+/* Vybrid VF610 clock divider, register value pairs */
+static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
+	{ 20,   0x00 }, { 22,   0x01 }, { 24,   0x02 }, { 26,   0x03 },
+	{ 28,   0x04 }, { 30,   0x05 }, { 32,   0x09 }, { 34,   0x06 },
+	{ 36,   0x0A }, { 40,   0x07 }, { 44,   0x0C }, { 48,   0x0D },
+	{ 52,   0x43 }, { 56,   0x0E }, { 60,   0x45 }, { 64,   0x12 },
+	{ 68,   0x0F }, { 72,   0x13 }, { 80,   0x14 }, { 88,   0x15 },
+	{ 96,   0x19 }, { 104,  0x16 }, { 112,  0x1A }, { 128,  0x17 },
+	{ 136,  0x4F }, { 144,  0x1C }, { 160,  0x1D }, { 176,  0x55 },
+	{ 192,  0x1E }, { 208,  0x56 }, { 224,  0x22 }, { 228,  0x24 },
+	{ 240,  0x1F }, { 256,  0x23 }, { 288,  0x5C }, { 320,  0x25 },
+	{ 384,  0x26 }, { 448,  0x2A }, { 480,  0x27 }, { 512,  0x2B },
+	{ 576,  0x2C }, { 640,  0x2D }, { 768,  0x31 }, { 896,  0x32 },
+	{ 960,  0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+	{ 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+	{ 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+	{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
+enum imx_i2c_type {
+	IMX1_I2C,
+	IMX21_I2C,
+	VF610_I2C,
+};
+
+struct imx_i2c_hwdata {
+	enum imx_i2c_type	devtype;
+	unsigned		regshift;
+	struct imx_i2c_clk_pair	*clk_div;
+	unsigned		ndivs;
+	unsigned		i2sr_clr_opcode;
+	unsigned		i2cr_ien_opcode;
+};
+
+struct imx_i2c_dma {
+	struct dma_chan		*chan_tx;
+	struct dma_chan		*chan_rx;
+	struct dma_chan		*chan_using;
+	struct completion	cmd_complete;
+	dma_addr_t		dma_buf;
+	unsigned int		dma_len;
+	enum dma_transfer_direction dma_transfer_dir;
+	enum dma_data_direction dma_data_dir;
+};
+
+struct imx_i2c_struct {
+	struct i2c_adapter	adapter;
+	struct clk		*clk;
+	void __iomem		*base;
+	wait_queue_head_t	queue;
+	unsigned long		i2csr;
+	unsigned int		disable_delay;
+	int			stopped;
+	unsigned int		ifdr; /* IMX_I2C_IFDR */
+	unsigned int		cur_clk;
+	unsigned int		bitrate;
+	const struct imx_i2c_hwdata	*hwdata;
+	struct i2c_bus_recovery_info rinfo;
+
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pinctrl_pins_default;
+	struct pinctrl_state *pinctrl_pins_gpio;
+
+	struct imx_i2c_dma	*dma;
+};
+
+static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
+	.devtype		= IMX1_I2C,
+	.regshift		= IMX_I2C_REGSHIFT,
+	.clk_div		= imx_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(imx_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W0C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_1,
+
+};
+
+static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
+	.devtype		= IMX21_I2C,
+	.regshift		= IMX_I2C_REGSHIFT,
+	.clk_div		= imx_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(imx_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W0C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_1,
+
+};
+
+static struct imx_i2c_hwdata vf610_i2c_hwdata = {
+	.devtype		= VF610_I2C,
+	.regshift		= VF610_I2C_REGSHIFT,
+	.clk_div		= vf610_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(vf610_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W1C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_0,
+
+};
+
+static const struct platform_device_id imx_i2c_devtype[] = {
+	{
+		.name = "imx1-i2c",
+		.driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
+	}, {
+		.name = "imx21-i2c",
+		.driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
+
+static const struct of_device_id i2c_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
+	{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
+	{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
+
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+	return i2c_imx->hwdata->devtype == IMX1_I2C;
+}
+
+static inline void imx_i2c_write_reg(unsigned int val,
+		struct imx_i2c_struct *i2c_imx, unsigned int reg)
+{
+	writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
+		unsigned int reg)
+{
+	return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+/* Functions for DMA support */
+static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
+						dma_addr_t phy_addr)
+{
+	struct imx_i2c_dma *dma;
+	struct dma_slave_config dma_sconfig;
+	struct device *dev = &i2c_imx->adapter.dev;
+	int ret;
+
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return;
+
+	dma->chan_tx = dma_request_slave_channel(dev, "tx");
+	if (!dma->chan_tx) {
+		dev_dbg(dev, "can't request DMA tx channel\n");
+		goto fail_al;
+	}
+
+	dma_sconfig.dst_addr = phy_addr +
+				(IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.dst_maxburst = 1;
+	dma_sconfig.direction = DMA_MEM_TO_DEV;
+	ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+	if (ret < 0) {
+		dev_dbg(dev, "can't configure tx channel\n");
+		goto fail_tx;
+	}
+
+	dma->chan_rx = dma_request_slave_channel(dev, "rx");
+	if (!dma->chan_rx) {
+		dev_dbg(dev, "can't request DMA rx channel\n");
+		goto fail_tx;
+	}
+
+	dma_sconfig.src_addr = phy_addr +
+				(IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.src_maxburst = 1;
+	dma_sconfig.direction = DMA_DEV_TO_MEM;
+	ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+	if (ret < 0) {
+		dev_dbg(dev, "can't configure rx channel\n");
+		goto fail_rx;
+	}
+
+	i2c_imx->dma = dma;
+	init_completion(&dma->cmd_complete);
+	dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+		dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+	return;
+
+fail_rx:
+	dma_release_channel(dma->chan_rx);
+fail_tx:
+	dma_release_channel(dma->chan_tx);
+fail_al:
+	devm_kfree(dev, dma);
+	dev_info(dev, "can't use DMA, using PIO instead.\n");
+}
+
+static void i2c_imx_dma_callback(void *arg)
+{
+	struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
+	struct imx_i2c_dma *dma = i2c_imx->dma;
+
+	dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
+			dma->dma_len, dma->dma_data_dir);
+	complete(&dma->cmd_complete);
+}
+
+static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
+					struct i2c_msg *msgs)
+{
+	struct imx_i2c_dma *dma = i2c_imx->dma;
+	struct dma_async_tx_descriptor *txdesc;
+	struct device *dev = &i2c_imx->adapter.dev;
+	struct device *chan_dev = dma->chan_using->device->dev;
+
+	dma->dma_buf = dma_map_single(chan_dev, msgs->buf,
+					dma->dma_len, dma->dma_data_dir);
+	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+		dev_err(dev, "DMA mapping failed\n");
+		goto err_map;
+	}
+
+	txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
+					dma->dma_len, dma->dma_transfer_dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		goto err_desc;
+	}
+
+	reinit_completion(&dma->cmd_complete);
+	txdesc->callback = i2c_imx_dma_callback;
+	txdesc->callback_param = i2c_imx;
+	if (dma_submit_error(dmaengine_submit(txdesc))) {
+		dev_err(dev, "DMA submit failed\n");
+		goto err_submit;
+	}
+
+	dma_async_issue_pending(dma->chan_using);
+	return 0;
+
+err_submit:
+	dmaengine_terminate_all(dma->chan_using);
+err_desc:
+	dma_unmap_single(chan_dev, dma->dma_buf,
+			dma->dma_len, dma->dma_data_dir);
+err_map:
+	return -EINVAL;
+}
+
+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
+{
+	struct imx_i2c_dma *dma = i2c_imx->dma;
+
+	dma->dma_buf = 0;
+	dma->dma_len = 0;
+
+	dma_release_channel(dma->chan_tx);
+	dma->chan_tx = NULL;
+
+	dma_release_channel(dma->chan_rx);
+	dma->chan_rx = NULL;
+
+	dma->chan_using = NULL;
+}
+
+static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
+{
+	unsigned long orig_jiffies = jiffies;
+	unsigned int temp;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+	while (1) {
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+
+		/* check for arbitration lost */
+		if (temp & I2SR_IAL) {
+			temp &= ~I2SR_IAL;
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+			return -EAGAIN;
+		}
+
+		if (for_busy && (temp & I2SR_IBB))
+			break;
+		if (!for_busy && !(temp & I2SR_IBB))
+			break;
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
+			dev_dbg(&i2c_imx->adapter.dev,
+				"<%s> I2C bus is busy\n", __func__);
+			return -ETIMEDOUT;
+		}
+		schedule();
+	}
+
+	return 0;
+}
+
+static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
+{
+	wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+
+	if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
+	i2c_imx->i2csr = 0;
+	return 0;
+}
+
+static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
+{
+	if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
+		return -ENXIO;  /* No ACK */
+	}
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
+	return 0;
+}
+
+static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
+{
+	struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
+	unsigned int i2c_clk_rate;
+	unsigned int div;
+	int i;
+
+	/* Divider value calculation */
+	i2c_clk_rate = clk_get_rate(i2c_imx->clk);
+	if (i2c_imx->cur_clk == i2c_clk_rate)
+		return;
+
+	i2c_imx->cur_clk = i2c_clk_rate;
+
+	div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
+	if (div < i2c_clk_div[0].div)
+		i = 0;
+	else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
+		i = i2c_imx->hwdata->ndivs - 1;
+	else
+		for (i = 0; i2c_clk_div[i].div < div; i++)
+			;
+
+	/* Store divider value */
+	i2c_imx->ifdr = i2c_clk_div[i].val;
+
+	/*
+	 * There dummy delay is calculated.
+	 * It should be about one I2C clock period long.
+	 * This delay is used in I2C bus disable function
+	 * to fix chip hardware bug.
+	 */
+	i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+		+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
+
+#ifdef CONFIG_I2C_DEBUG_BUS
+	dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n",
+		i2c_clk_rate, div);
+	dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
+		i2c_clk_div[i].val, i2c_clk_div[i].div);
+#endif
+}
+
+static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
+{
+	unsigned int temp = 0;
+	int result;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+	i2c_imx_set_clk(i2c_imx);
+
+	imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
+	/* Enable I2C controller */
+	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
+
+	/* Wait controller to be stable */
+	usleep_range(50, 150);
+
+	/* Start I2C transaction */
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp |= I2CR_MSTA;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	result = i2c_imx_bus_busy(i2c_imx, 1);
+	if (result)
+		return result;
+	i2c_imx->stopped = 0;
+
+	temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
+	temp &= ~I2CR_DMAEN;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	return result;
+}
+
+static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
+{
+	unsigned int temp = 0;
+
+	if (!i2c_imx->stopped) {
+		/* Stop I2C transaction */
+		dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		temp &= ~(I2CR_MSTA | I2CR_MTX);
+		if (i2c_imx->dma)
+			temp &= ~I2CR_DMAEN;
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	}
+	if (is_imx1_i2c(i2c_imx)) {
+		/*
+		 * This delay caused by an i.MXL hardware bug.
+		 * If no (or too short) delay, no "STOP" bit will be generated.
+		 */
+		udelay(i2c_imx->disable_delay);
+	}
+
+	if (!i2c_imx->stopped) {
+		i2c_imx_bus_busy(i2c_imx, 0);
+		i2c_imx->stopped = 1;
+	}
+
+	/* Disable I2C controller */
+	temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+}
+
+static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
+{
+	struct imx_i2c_struct *i2c_imx = dev_id;
+	unsigned int temp;
+
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+	if (temp & I2SR_IIF) {
+		/* save status register */
+		i2c_imx->i2csr = temp;
+		temp &= ~I2SR_IIF;
+		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+		wake_up(&i2c_imx->queue);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
+					struct i2c_msg *msgs)
+{
+	int result;
+	unsigned long time_left;
+	unsigned int temp = 0;
+	unsigned long orig_jiffies = jiffies;
+	struct imx_i2c_dma *dma = i2c_imx->dma;
+	struct device *dev = &i2c_imx->adapter.dev;
+
+	dma->chan_using = dma->chan_tx;
+	dma->dma_transfer_dir = DMA_MEM_TO_DEV;
+	dma->dma_data_dir = DMA_TO_DEVICE;
+	dma->dma_len = msgs->len - 1;
+	result = i2c_imx_dma_xfer(i2c_imx, msgs);
+	if (result)
+		return result;
+
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp |= I2CR_DMAEN;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+	/*
+	 * Write slave address.
+	 * The first byte must be transmitted by the CPU.
+	 */
+	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+	time_left = wait_for_completion_timeout(
+				&i2c_imx->dma->cmd_complete,
+				msecs_to_jiffies(DMA_TIMEOUT));
+	if (time_left == 0) {
+		dmaengine_terminate_all(dma->chan_using);
+		return -ETIMEDOUT;
+	}
+
+	/* Waiting for transfer complete. */
+	while (1) {
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+		if (temp & I2SR_ICF)
+			break;
+		if (time_after(jiffies, orig_jiffies +
+				msecs_to_jiffies(DMA_TIMEOUT))) {
+			dev_dbg(dev, "<%s> Timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+		schedule();
+	}
+
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp &= ~I2CR_DMAEN;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+	/* The last data byte must be transferred by the CPU. */
+	imx_i2c_write_reg(msgs->buf[msgs->len-1],
+				i2c_imx, IMX_I2C_I2DR);
+	result = i2c_imx_trx_complete(i2c_imx);
+	if (result)
+		return result;
+
+	return i2c_imx_acked(i2c_imx);
+}
+
+static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
+			struct i2c_msg *msgs, bool is_lastmsg)
+{
+	int result;
+	unsigned long time_left;
+	unsigned int temp;
+	unsigned long orig_jiffies = jiffies;
+	struct imx_i2c_dma *dma = i2c_imx->dma;
+	struct device *dev = &i2c_imx->adapter.dev;
+
+
+	dma->chan_using = dma->chan_rx;
+	dma->dma_transfer_dir = DMA_DEV_TO_MEM;
+	dma->dma_data_dir = DMA_FROM_DEVICE;
+	/* The last two data bytes must be transferred by the CPU. */
+	dma->dma_len = msgs->len - 2;
+	result = i2c_imx_dma_xfer(i2c_imx, msgs);
+	if (result)
+		return result;
+
+	time_left = wait_for_completion_timeout(
+				&i2c_imx->dma->cmd_complete,
+				msecs_to_jiffies(DMA_TIMEOUT));
+	if (time_left == 0) {
+		dmaengine_terminate_all(dma->chan_using);
+		return -ETIMEDOUT;
+	}
+
+	/* waiting for transfer complete. */
+	while (1) {
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+		if (temp & I2SR_ICF)
+			break;
+		if (time_after(jiffies, orig_jiffies +
+				msecs_to_jiffies(DMA_TIMEOUT))) {
+			dev_dbg(dev, "<%s> Timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+		schedule();
+	}
+
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp &= ~I2CR_DMAEN;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+	/* read n-1 byte data */
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp |= I2CR_TXAK;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+	msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+	/* read n byte data */
+	result = i2c_imx_trx_complete(i2c_imx);
+	if (result)
+		return result;
+
+	if (is_lastmsg) {
+		/*
+		 * It must generate STOP before read I2DR to prevent
+		 * controller from generating another clock cycle
+		 */
+		dev_dbg(dev, "<%s> clear MSTA\n", __func__);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		temp &= ~(I2CR_MSTA | I2CR_MTX);
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+		i2c_imx_bus_busy(i2c_imx, 0);
+		i2c_imx->stopped = 1;
+	} else {
+		/*
+		 * For i2c master receiver repeat restart operation like:
+		 * read -> repeat MSTA -> read/write
+		 * The controller must set MTX before read the last byte in
+		 * the first read operation, otherwise the first read cost
+		 * one extra clock cycle.
+		 */
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		temp |= I2CR_MTX;
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	}
+	msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+
+	return 0;
+}
+
+static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+	int i, result;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
+		__func__, msgs->addr << 1);
+
+	/* write slave address */
+	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+	result = i2c_imx_trx_complete(i2c_imx);
+	if (result)
+		return result;
+	result = i2c_imx_acked(i2c_imx);
+	if (result)
+		return result;
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
+
+	/* write data */
+	for (i = 0; i < msgs->len; i++) {
+		dev_dbg(&i2c_imx->adapter.dev,
+			"<%s> write byte: B%d=0x%X\n",
+			__func__, i, msgs->buf[i]);
+		imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
+		result = i2c_imx_trx_complete(i2c_imx);
+		if (result)
+			return result;
+		result = i2c_imx_acked(i2c_imx);
+		if (result)
+			return result;
+	}
+	return 0;
+}
+
+static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
+{
+	int i, result;
+	unsigned int temp;
+	int block_data = msgs->flags & I2C_M_RECV_LEN;
+	int use_dma = i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data;
+
+	dev_dbg(&i2c_imx->adapter.dev,
+		"<%s> write slave address: addr=0x%x\n",
+		__func__, (msgs->addr << 1) | 0x01);
+
+	/* write slave address */
+	imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
+	result = i2c_imx_trx_complete(i2c_imx);
+	if (result)
+		return result;
+	result = i2c_imx_acked(i2c_imx);
+	if (result)
+		return result;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+
+	/* setup bus to read data */
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp &= ~I2CR_MTX;
+
+	/*
+	 * Reset the I2CR_TXAK flag initially for SMBus block read since the
+	 * length is unknown
+	 */
+	if ((msgs->len - 1) || block_data)
+		temp &= ~I2CR_TXAK;
+	if (use_dma)
+		temp |= I2CR_DMAEN;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
+
+	if (use_dma)
+		return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
+
+	/* read data */
+	for (i = 0; i < msgs->len; i++) {
+		u8 len = 0;
+
+		result = i2c_imx_trx_complete(i2c_imx);
+		if (result)
+			return result;
+		/*
+		 * First byte is the length of remaining packet
+		 * in the SMBus block data read. Add it to
+		 * msgs->len.
+		 */
+		if ((!i) && block_data) {
+			len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
+				return -EPROTO;
+			dev_dbg(&i2c_imx->adapter.dev,
+				"<%s> read length: 0x%X\n",
+				__func__, len);
+			msgs->len += len;
+		}
+		if (i == (msgs->len - 1)) {
+			if (is_lastmsg) {
+				/*
+				 * It must generate STOP before read I2DR to prevent
+				 * controller from generating another clock cycle
+				 */
+				dev_dbg(&i2c_imx->adapter.dev,
+					"<%s> clear MSTA\n", __func__);
+				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				temp &= ~(I2CR_MSTA | I2CR_MTX);
+				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+				i2c_imx_bus_busy(i2c_imx, 0);
+				i2c_imx->stopped = 1;
+			} else {
+				/*
+				 * For i2c master receiver repeat restart operation like:
+				 * read -> repeat MSTA -> read/write
+				 * The controller must set MTX before read the last byte in
+				 * the first read operation, otherwise the first read cost
+				 * one extra clock cycle.
+				 */
+				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				temp |= I2CR_MTX;
+				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+			}
+		} else if (i == (msgs->len - 2)) {
+			dev_dbg(&i2c_imx->adapter.dev,
+				"<%s> set TXAK\n", __func__);
+			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+			temp |= I2CR_TXAK;
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+		}
+		if ((!i) && block_data)
+			msgs->buf[0] = len;
+		else
+			msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+		dev_dbg(&i2c_imx->adapter.dev,
+			"<%s> read byte: B%d=0x%X\n",
+			__func__, i, msgs->buf[i]);
+	}
+	return 0;
+}
+
+static int i2c_imx_xfer(struct i2c_adapter *adapter,
+						struct i2c_msg *msgs, int num)
+{
+	unsigned int i, temp;
+	int result;
+	bool is_lastmsg = false;
+	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+
+	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+	if (result < 0)
+		goto out;
+
+	/* Start I2C transfer */
+	result = i2c_imx_start(i2c_imx);
+	if (result) {
+		if (i2c_imx->adapter.bus_recovery_info) {
+			i2c_recover_bus(&i2c_imx->adapter);
+			result = i2c_imx_start(i2c_imx);
+		}
+	}
+
+	if (result)
+		goto fail0;
+
+	/* read/write data */
+	for (i = 0; i < num; i++) {
+		if (i == num - 1)
+			is_lastmsg = true;
+
+		if (i) {
+			dev_dbg(&i2c_imx->adapter.dev,
+				"<%s> repeated start\n", __func__);
+			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+			temp |= I2CR_RSTA;
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+			result = i2c_imx_bus_busy(i2c_imx, 1);
+			if (result)
+				goto fail0;
+		}
+		dev_dbg(&i2c_imx->adapter.dev,
+			"<%s> transfer message: %d\n", __func__, i);
+		/* write/read data */
+#ifdef CONFIG_I2C_DEBUG_BUS
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		dev_dbg(&i2c_imx->adapter.dev,
+			"<%s> CONTROL: IEN=%d, IIEN=%d, MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n",
+			__func__,
+			(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
+			(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
+			(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+		dev_dbg(&i2c_imx->adapter.dev,
+			"<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n",
+			__func__,
+			(temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
+			(temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
+			(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
+			(temp & I2SR_RXAK ? 1 : 0));
+#endif
+		if (msgs[i].flags & I2C_M_RD)
+			result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
+		else {
+			if (i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD)
+				result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
+			else
+				result = i2c_imx_write(i2c_imx, &msgs[i]);
+		}
+		if (result)
+			goto fail0;
+	}
+
+fail0:
+	/* Stop I2C transfer */
+	i2c_imx_stop(i2c_imx);
+
+	pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent);
+	pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
+
+out:
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
+		(result < 0) ? "error" : "success msg",
+			(result < 0) ? result : num);
+	return (result < 0) ? result : num;
+}
+
+static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct imx_i2c_struct *i2c_imx;
+
+	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
+
+	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
+}
+
+static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct imx_i2c_struct *i2c_imx;
+
+	i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
+
+	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
+}
+
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+		struct platform_device *pdev)
+{
+	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
+
+	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+		return PTR_ERR(i2c_imx->pinctrl);
+	}
+
+	i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
+			PINCTRL_STATE_DEFAULT);
+	i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
+			"gpio");
+	rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
+	rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
+
+	if (rinfo->sda_gpio == -EPROBE_DEFER ||
+	    rinfo->scl_gpio == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (!gpio_is_valid(rinfo->sda_gpio) ||
+		   !gpio_is_valid(rinfo->scl_gpio) ||
+		   IS_ERR(i2c_imx->pinctrl_pins_default) ||
+		   IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
+		dev_dbg(&pdev->dev, "recovery information incomplete\n");
+		return 0;
+	}
+
+	dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
+			rinfo->scl_gpio, rinfo->sda_gpio);
+
+	rinfo->prepare_recovery = i2c_imx_prepare_recovery;
+	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
+	rinfo->recover_bus = i2c_generic_gpio_recovery;
+	i2c_imx->adapter.bus_recovery_info = rinfo;
+
+	return 0;
+}
+
+static u32 i2c_imx_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm i2c_imx_algo = {
+	.master_xfer	= i2c_imx_xfer,
+	.functionality	= i2c_imx_func,
+};
+
+static int i2c_imx_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+							   &pdev->dev);
+	struct imx_i2c_struct *i2c_imx;
+	struct resource *res;
+	struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	void __iomem *base;
+	int irq, ret;
+	dma_addr_t phy_addr;
+
+	dev_dbg(&pdev->dev, "<%s>\n", __func__);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "can't get irq number\n");
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	phy_addr = (dma_addr_t)res->start;
+	i2c_imx = devm_kzalloc(&pdev->dev, sizeof(*i2c_imx), GFP_KERNEL);
+	if (!i2c_imx)
+		return -ENOMEM;
+
+	if (of_id)
+		i2c_imx->hwdata = of_id->data;
+	else
+		i2c_imx->hwdata = (struct imx_i2c_hwdata *)
+				platform_get_device_id(pdev)->driver_data;
+
+	/* Setup i2c_imx driver structure */
+	strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
+	i2c_imx->adapter.owner		= THIS_MODULE;
+	i2c_imx->adapter.algo		= &i2c_imx_algo;
+	i2c_imx->adapter.dev.parent	= &pdev->dev;
+	i2c_imx->adapter.nr		= pdev->id;
+	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
+	i2c_imx->base			= base;
+
+	/* Get I2C clock */
+	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c_imx->clk)) {
+		if (PTR_ERR(i2c_imx->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "can't get I2C clock\n");
+		return PTR_ERR(i2c_imx->clk);
+	}
+
+	ret = clk_prepare_enable(i2c_imx->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "can't enable I2C clock, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Request IRQ */
+	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
+				pdev->name, i2c_imx);
+	if (ret) {
+		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+		goto clk_disable;
+	}
+
+	/* Init queue */
+	init_waitqueue_head(&i2c_imx->queue);
+
+	/* Set up adapter data */
+	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
+
+	/* Set up platform driver data */
+	platform_set_drvdata(pdev, i2c_imx);
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto rpm_disable;
+
+	/* Set up clock divider */
+	i2c_imx->bitrate = IMX_I2C_BIT_RATE;
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "clock-frequency", &i2c_imx->bitrate);
+	if (ret < 0 && pdata && pdata->bitrate)
+		i2c_imx->bitrate = pdata->bitrate;
+
+	/* Set up chip registers to defaults */
+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+			i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+
+	/* Init optional bus recovery function */
+	ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
+
+	/* Add I2C adapter */
+	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
+	if (ret < 0)
+		goto rpm_disable;
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
+	dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
+	dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
+		i2c_imx->adapter.name);
+	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
+
+	/* Init DMA config if supported */
+	i2c_imx_dma_request(i2c_imx, phy_addr);
+
+	return 0;   /* Return OK */
+
+rpm_disable:
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+
+clk_disable:
+	clk_disable_unprepare(i2c_imx->clk);
+	return ret;
+}
+
+static int i2c_imx_remove(struct platform_device *pdev)
+{
+	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		return ret;
+
+	/* remove adapter */
+	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
+	i2c_del_adapter(&i2c_imx->adapter);
+
+	if (i2c_imx->dma)
+		i2c_imx_dma_free(i2c_imx);
+
+	/* setup chip registers to defaults */
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+
+	clk_disable_unprepare(i2c_imx->clk);
+
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_imx_runtime_suspend(struct device *dev)
+{
+	struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(i2c_imx->clk);
+
+	return 0;
+}
+
+static int i2c_imx_runtime_resume(struct device *dev)
+{
+	struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(i2c_imx->clk);
+	if (ret)
+		dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
+
+	return ret;
+}
+
+static const struct dev_pm_ops i2c_imx_pm_ops = {
+	SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend,
+			   i2c_imx_runtime_resume, NULL)
+};
+#define I2C_IMX_PM_OPS (&i2c_imx_pm_ops)
+#else
+#define I2C_IMX_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver i2c_imx_driver = {
+	.probe = i2c_imx_probe,
+	.remove = i2c_imx_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.pm = I2C_IMX_PM_OPS,
+		.of_match_table = i2c_imx_dt_ids,
+	},
+	.id_table = imx_i2c_devtype,
+};
+
+static int __init i2c_adap_imx_init(void)
+{
+	return platform_driver_register(&i2c_imx_driver);
+}
+subsys_initcall(i2c_adap_imx_init);
+
+static void __exit i2c_adap_imx_exit(void)
+{
+	platform_driver_unregister(&i2c_imx_driver);
+}
+module_exit(i2c_adap_imx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Darius Augulis");
+MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.c
new file mode 100644
index 0000000..85cbe4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.c
@@ -0,0 +1,525 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x       */
+/* ------------------------------------------------------------------------- */
+/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                    <Peter dot Milne at D hyphen TACQ dot com>
+ *
+ * With acknowledgements to i2c-algo-ibm_ocp.c by
+ * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
+ *
+ * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
+ *
+ * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
+ *
+ * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
+ *
+ * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
+ *
+ * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
+ * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
+ * - Make it work with IXP46x chips
+ * - Cleanup function names, coding style, etc
+ *
+ * - writing to slave address causes latchup on iop331.
+ *	fix: driver refuses to address self.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include "i2c-iop3xx.h"
+
+/* global unit counter */
+static int i2c_id;
+
+static inline unsigned char
+iic_cook_addr(struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	addr = i2c_8bit_addr_from_msg(msg);
+
+	return addr;
+}
+
+static void
+iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	/* Follows devman 9.3 */
+	__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
+	__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
+	__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
+}
+
+static void
+iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
+
+	/*
+	 * Every time unit enable is asserted, GPOD needs to be cleared
+	 * on IOP3XX to avoid data corruption on the bus.
+	 */
+#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
+	if (iop3xx_adap->id == 0) {
+		gpio_set_value(7, 0);
+		gpio_set_value(6, 0);
+	} else {
+		gpio_set_value(5, 0);
+		gpio_set_value(4, 0);
+	}
+#endif
+	/* NB SR bits not same position as CR IE bits :-( */
+	iop3xx_adap->SR_enabled =
+		IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
+		IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
+
+	cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
+		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE;
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+}
+
+static void
+iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+
+	cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
+		IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+}
+
+/*
+ * NB: the handler has to clear the source of the interrupt!
+ * Then it passes the SR flags of interest to BH via adap data
+ */
+static irqreturn_t
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
+	u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
+
+	if ((sr &= iop3xx_adap->SR_enabled)) {
+		__raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET);
+		iop3xx_adap->SR_received |= sr;
+		wake_up_interruptible(&iop3xx_adap->waitq);
+	}
+	return IRQ_HANDLED;
+}
+
+/* check all error conditions, clear them , report most important */
+static int
+iop3xx_i2c_error(u32 sr)
+{
+	int rc = 0;
+
+	if ((sr & IOP3XX_ISR_BERRD)) {
+		if ( !rc ) rc = -I2C_ERR_BERR;
+	}
+	if ((sr & IOP3XX_ISR_ALD)) {
+		if ( !rc ) rc = -I2C_ERR_ALD;
+	}
+	return rc;
+}
+
+static inline u32
+iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned long flags;
+	u32 sr;
+
+	spin_lock_irqsave(&iop3xx_adap->lock, flags);
+	sr = iop3xx_adap->SR_received;
+	iop3xx_adap->SR_received = 0;
+	spin_unlock_irqrestore(&iop3xx_adap->lock, flags);
+
+	return sr;
+}
+
+/*
+ * sleep until interrupted, then recover and analyse the SR
+ * saved by handler
+ */
+typedef int (* compare_func)(unsigned test, unsigned mask);
+/* returns 1 on correct comparison */
+
+static int
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
+			  unsigned flags, unsigned* status,
+			  compare_func compare)
+{
+	unsigned sr = 0;
+	int interrupted;
+	int done;
+	int rc = 0;
+
+	do {
+		interrupted = wait_event_interruptible_timeout (
+			iop3xx_adap->waitq,
+			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
+			1 * HZ
+			);
+		if ((rc = iop3xx_i2c_error(sr)) < 0) {
+			*status = sr;
+			return rc;
+		} else if (!interrupted) {
+			*status = sr;
+			return -ETIMEDOUT;
+		}
+	} while(!done);
+
+	*status = sr;
+
+	return 0;
+}
+
+/*
+ * Concrete compare_funcs
+ */
+static int
+all_bits_clear(unsigned test, unsigned mask)
+{
+	return (test & mask) == 0;
+}
+
+static int
+any_bits_set(unsigned test, unsigned mask)
+{
+	return (test & mask) != 0;
+}
+
+static int
+iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event(
+		iop3xx_adap,
+	        IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
+		status, any_bits_set);
+}
+
+static int
+iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event(
+		iop3xx_adap,
+		IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
+		status,	any_bits_set);
+}
+
+static int
+iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event(
+		iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
+}
+
+static int
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
+				struct i2c_msg* msg)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc;
+
+	/* avoid writing to my slave address (hangs on 80331),
+	 * forbidden in Intel developer manual
+	 */
+	if (msg->addr == MYSAR) {
+		return -EBUSY;
+	}
+
+	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
+
+	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
+	cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
+
+	return rc;
+}
+
+static int
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
+				int stop)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc = 0;
+
+	__raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET);
+	cr &= ~IOP3XX_ICR_MSTART;
+	if (stop) {
+		cr |= IOP3XX_ICR_MSTOP;
+	} else {
+		cr &= ~IOP3XX_ICR_MSTOP;
+	}
+	cr |= IOP3XX_ICR_TBYTE;
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
+
+	return rc;
+}
+
+static int
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
+				int stop)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc = 0;
+
+	cr &= ~IOP3XX_ICR_MSTART;
+
+	if (stop) {
+		cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK;
+	} else {
+		cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
+	}
+	cr |= IOP3XX_ICR_TBYTE;
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+
+	rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status);
+
+	*byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET);
+
+	return rc;
+}
+
+static int
+iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii)
+		rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
+	return rc;
+}
+
+static int
+iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii)
+		rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
+
+	return rc;
+}
+
+/*
+ * Description:  This function implements combined transactions.  Combined
+ * transactions consist of combinations of reading and writing blocks of data.
+ * FROM THE SAME ADDRESS
+ * Each transfer (i.e. a read or a write) is separated by a repeated start
+ * condition.
+ */
+static int
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int rc;
+
+	rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg);
+	if (rc < 0) {
+		return rc;
+	}
+
+	if ((pmsg->flags&I2C_M_RD)) {
+		return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
+	} else {
+		return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
+	}
+}
+
+/*
+ * master_xfer() - main read/write entry
+ */
+static int
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int im = 0;
+	int ret = 0;
+	int status;
+
+	iop3xx_i2c_wait_idle(iop3xx_adap, &status);
+	iop3xx_i2c_reset(iop3xx_adap);
+	iop3xx_i2c_enable(iop3xx_adap);
+
+	for (im = 0; ret == 0 && im != num; im++) {
+		ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]);
+	}
+
+	iop3xx_i2c_transaction_cleanup(iop3xx_adap);
+
+	if(ret)
+		return ret;
+
+	return im;
+}
+
+static u32
+iop3xx_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm iop3xx_i2c_algo = {
+	.master_xfer	= iop3xx_i2c_master_xfer,
+	.functionality	= iop3xx_i2c_func,
+};
+
+static int
+iop3xx_i2c_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *padapter = platform_get_drvdata(pdev);
+	struct i2c_algo_iop3xx_data *adapter_data =
+		(struct i2c_algo_iop3xx_data *)padapter->algo_data;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
+
+	/*
+	 * Disable the actual HW unit
+	 */
+	cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
+		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE);
+	__raw_writel(cr, adapter_data->ioaddr + CR_OFFSET);
+
+	iounmap(adapter_data->ioaddr);
+	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
+	kfree(adapter_data);
+	kfree(padapter);
+
+	return 0;
+}
+
+static int
+iop3xx_i2c_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret, irq;
+	struct i2c_adapter *new_adapter;
+	struct i2c_algo_iop3xx_data *adapter_data;
+
+	new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (!new_adapter) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+	if (!adapter_data) {
+		ret = -ENOMEM;
+		goto free_adapter;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto free_both;
+	}
+
+	if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) {
+		ret = -EBUSY;
+		goto free_both;
+	}
+
+	/* set the adapter enumeration # */
+	adapter_data->id = i2c_id++;
+
+	adapter_data->ioaddr = ioremap(res->start, IOP3XX_I2C_IO_SIZE);
+	if (!adapter_data->ioaddr) {
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = -ENXIO;
+		goto unmap;
+	}
+	ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
+				pdev->name, adapter_data);
+
+	if (ret) {
+		ret = -EIO;
+		goto unmap;
+	}
+
+	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
+	new_adapter->owner = THIS_MODULE;
+	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	new_adapter->dev.parent = &pdev->dev;
+	new_adapter->nr = pdev->id;
+
+	/*
+	 * Default values...should these come in from board code?
+	 */
+	new_adapter->timeout = HZ;
+	new_adapter->algo = &iop3xx_i2c_algo;
+
+	init_waitqueue_head(&adapter_data->waitq);
+	spin_lock_init(&adapter_data->lock);
+
+	iop3xx_i2c_reset(adapter_data);
+	iop3xx_i2c_enable(adapter_data);
+
+	platform_set_drvdata(pdev, new_adapter);
+	new_adapter->algo_data = adapter_data;
+
+	i2c_add_numbered_adapter(new_adapter);
+
+	return 0;
+
+unmap:
+	iounmap(adapter_data->ioaddr);
+
+release_region:
+	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
+
+free_both:
+	kfree(adapter_data);
+
+free_adapter:
+	kfree(new_adapter);
+
+out:
+	return ret;
+}
+
+
+static struct platform_driver iop3xx_i2c_driver = {
+	.probe		= iop3xx_i2c_probe,
+	.remove		= iop3xx_i2c_remove,
+	.driver		= {
+		.name	= "IOP3xx-I2C",
+	},
+};
+
+module_platform_driver(iop3xx_i2c_driver);
+
+MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
+MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:IOP3xx-I2C");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.h
new file mode 100644
index 0000000..2d6929c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-iop3xx.h
@@ -0,0 +1,103 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c         */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.			     */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP3XX_ICR_FAST_MODE	0x8000	/* 1=400kBps, 0=100kBps */
+#define IOP3XX_ICR_UNIT_RESET	0x4000	/* 1=RESET */
+#define IOP3XX_ICR_SAD_IE	0x2000	/* 1=Slave Detect Interrupt Enable */
+#define IOP3XX_ICR_ALD_IE	0x1000	/* 1=Arb Loss Detect Interrupt Enable */
+#define IOP3XX_ICR_SSD_IE	0x0800	/* 1=Slave STOP Detect Interrupt Enable */
+#define IOP3XX_ICR_BERR_IE	0x0400	/* 1=Bus Error Interrupt Enable */
+#define IOP3XX_ICR_RXFULL_IE	0x0200	/* 1=Receive Full Interrupt Enable */
+#define IOP3XX_ICR_TXEMPTY_IE	0x0100	/* 1=Transmit Empty Interrupt Enable */
+#define IOP3XX_ICR_GCD		0x0080	/* 1=General Call Disable */
+/*
+ * IOP3XX_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP3XX_ICR_UE		0x0040	/* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems, 
+ * the user needs to ensure that the GPIO Output Data Register - 
+ * GPOD bits associated with an I2C port are cleared prior to setting 
+ * the enable bit for that I2C serial port. 
+ * The user prepares to enable I2C port 0 and 
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */
+#define IOP3XX_ICR_SCLEN	0x0020	/* 1=SCL enable for master mode */
+#define IOP3XX_ICR_MABORT	0x0010	/* 1=Send a STOP with no data 
+					 * NB TBYTE must be clear */
+#define IOP3XX_ICR_TBYTE	0x0008	/* 1=Send/Receive a byte. i2c clears */
+#define IOP3XX_ICR_NACK		0x0004	/* 1=reply with NACK */
+#define IOP3XX_ICR_MSTOP	0x0002	/* 1=send a STOP after next data byte */
+#define IOP3XX_ICR_MSTART	0x0001	/* 1=initiate a START */
+
+
+#define IOP3XX_ISR_BERRD	0x0400	/* 1=BUS ERROR Detected */
+#define IOP3XX_ISR_SAD		0x0200	/* 1=Slave ADdress Detected */
+#define IOP3XX_ISR_GCAD		0x0100	/* 1=General Call Address Detected */
+#define IOP3XX_ISR_RXFULL	0x0080	/* 1=Receive Full */
+#define IOP3XX_ISR_TXEMPTY	0x0040	/* 1=Transmit Empty */
+#define IOP3XX_ISR_ALD		0x0020	/* 1=Arbitration Loss Detected */
+#define IOP3XX_ISR_SSD		0x0010	/* 1=Slave STOP Detected */
+#define IOP3XX_ISR_BBUSY	0x0008	/* 1=Bus BUSY */
+#define IOP3XX_ISR_UNITBUSY	0x0004	/* 1=Unit Busy */
+#define IOP3XX_ISR_NACK		0x0002	/* 1=Unit Rx or Tx a NACK */
+#define IOP3XX_ISR_RXREAD	0x0001	/* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP3XX_ISR_CLEARBITS	0x07f0
+
+#define IOP3XX_ISAR_SAMASK	0x007f
+
+#define IOP3XX_IDBR_MASK	0x00ff
+
+#define IOP3XX_IBMR_SCL		0x0002
+#define IOP3XX_IBMR_SDA		0x0001
+
+#define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
+#define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
+
+#define MYSAR			0	/* default slave address */
+
+#define I2C_ERR			321
+#define I2C_ERR_BERR		(I2C_ERR+0)
+#define I2C_ERR_ALD		(I2C_ERR+1)
+
+
+#define	CR_OFFSET		0
+#define	SR_OFFSET		0x4
+#define	SAR_OFFSET		0x8
+#define	DBR_OFFSET		0xc
+#define	CCR_OFFSET		0x10
+#define	BMR_OFFSET		0x14
+
+#define	IOP3XX_I2C_IO_SIZE	0x18
+
+struct i2c_algo_iop3xx_data {
+	void __iomem *ioaddr;
+	wait_queue_head_t waitq;
+	spinlock_t lock;
+	u32 SR_enabled, SR_received;
+	int id;
+};
+
+#endif /* I2C_IOP3XX_H */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-isch.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-isch.c
new file mode 100644
index 0000000..0cf1379
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-isch.c
@@ -0,0 +1,320 @@
+/*
+    i2c-isch.c - Linux kernel driver for Intel SCH chipset SMBus
+    - Based on i2c-piix4.c
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+    - Intel SCH support
+    Copyright (c) 2007 - 2008 Jacob Jun Pan <jacob.jun.pan@intel.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License version 2 as
+    published by the Free Software Foundation.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+   Supports:
+	Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+/* SCH SMBus address offsets */
+#define SMBHSTCNT	(0 + sch_smba)
+#define SMBHSTSTS	(1 + sch_smba)
+#define SMBHSTCLK	(2 + sch_smba)
+#define SMBHSTADD	(4 + sch_smba) /* TSA */
+#define SMBHSTCMD	(5 + sch_smba)
+#define SMBHSTDAT0	(6 + sch_smba)
+#define SMBHSTDAT1	(7 + sch_smba)
+#define SMBBLKDAT	(0x20 + sch_smba)
+
+/* Other settings */
+#define MAX_RETRIES	5000
+
+/* I2C constants */
+#define SCH_QUICK		0x00
+#define SCH_BYTE		0x01
+#define SCH_BYTE_DATA		0x02
+#define SCH_WORD_DATA		0x03
+#define SCH_BLOCK_DATA		0x05
+
+static unsigned short sch_smba;
+static struct i2c_adapter sch_adapter;
+static int backbone_speed = 33000; /* backbone speed in kHz */
+module_param(backbone_speed, int, S_IRUSR | S_IWUSR);
+MODULE_PARM_DESC(backbone_speed, "Backbone speed in kHz, (default = 33000)");
+
+/*
+ * Start the i2c transaction -- the i2c_access will prepare the transaction
+ * and this function will execute it.
+ * return 0 for success and others for failure.
+ */
+static int sch_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int retries = 0;
+
+	dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+		inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+		inb(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	temp = inb(SMBHSTSTS) & 0x0f;
+	if (temp) {
+		/* Can not be busy since we checked it in sch_access */
+		if (temp & 0x01) {
+			dev_dbg(&sch_adapter.dev, "Completion (%02x). "
+				"Clear...\n", temp);
+		}
+		if (temp & 0x06) {
+			dev_dbg(&sch_adapter.dev, "SMBus error (%02x). "
+				"Resetting...\n", temp);
+		}
+		outb(temp, SMBHSTSTS);
+		temp = inb(SMBHSTSTS) & 0x0f;
+		if (temp) {
+			dev_err(&sch_adapter.dev,
+				"SMBus is not ready: (%02x)\n", temp);
+			return -EAGAIN;
+		}
+	}
+
+	/* start the transaction by setting bit 4 */
+	outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT);
+
+	do {
+		usleep_range(100, 200);
+		temp = inb(SMBHSTSTS) & 0x0f;
+	} while ((temp & 0x08) && (retries++ < MAX_RETRIES));
+
+	/* If the SMBus is still busy, we give up */
+	if (retries > MAX_RETRIES) {
+		dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+	if (temp & 0x04) {
+		result = -EIO;
+		dev_dbg(&sch_adapter.dev, "Bus collision! SMBus may be "
+			"locked until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	} else if (temp & 0x02) {
+		result = -EIO;
+		dev_err(&sch_adapter.dev, "Error: no response!\n");
+	} else if (temp & 0x01) {
+		dev_dbg(&sch_adapter.dev, "Post complete!\n");
+		outb(temp, SMBHSTSTS);
+		temp = inb(SMBHSTSTS) & 0x07;
+		if (temp & 0x06) {
+			/* Completion clear failed */
+			dev_dbg(&sch_adapter.dev, "Failed reset at end of "
+				"transaction (%02x), Bus error!\n", temp);
+		}
+	} else {
+		result = -ENXIO;
+		dev_dbg(&sch_adapter.dev, "No such address.\n");
+	}
+	dev_dbg(&sch_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+		inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+		inb(SMBHSTDAT1));
+	return result;
+}
+
+/*
+ * This is the main access entry for i2c-sch access
+ * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
+ * (0 for read and 1 for write), size is i2c transaction type and data is the
+ * union of transaction for data to be transferred or data read from bus.
+ * return 0 for success and others for failure.
+ */
+static s32 sch_access(struct i2c_adapter *adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data *data)
+{
+	int i, len, temp, rc;
+
+	/* Make sure the SMBus host is not busy */
+	temp = inb(SMBHSTSTS) & 0x0f;
+	if (temp & 0x08) {
+		dev_dbg(&sch_adapter.dev, "SMBus busy (%02x)\n", temp);
+		return -EAGAIN;
+	}
+	temp = inw(SMBHSTCLK);
+	if (!temp) {
+		/*
+		 * We can't determine if we have 33 or 25 MHz clock for
+		 * SMBus, so expect 33 MHz and calculate a bus clock of
+		 * 100 kHz. If we actually run at 25 MHz the bus will be
+		 * run ~75 kHz instead which should do no harm.
+		 */
+		dev_notice(&sch_adapter.dev,
+			"Clock divider unitialized. Setting defaults\n");
+		outw(backbone_speed / (4 * 100), SMBHSTCLK);
+	}
+
+	dev_dbg(&sch_adapter.dev, "access size: %d %s\n", size,
+		(read_write)?"READ":"WRITE");
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		size = SCH_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb(command, SMBHSTCMD);
+		size = SCH_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb(data->byte, SMBHSTDAT0);
+		size = SCH_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb(data->word & 0xff, SMBHSTDAT0);
+			outb((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = SCH_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			outb(len, SMBHSTDAT0);
+			for (i = 1; i <= len; i++)
+				outb(data->block[i], SMBBLKDAT+i-1);
+		}
+		size = SCH_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+	dev_dbg(&sch_adapter.dev, "write size %d to 0x%04x\n", size, SMBHSTCNT);
+	outb((inb(SMBHSTCNT) & 0xb0) | (size & 0x7), SMBHSTCNT);
+
+	rc = sch_transaction();
+	if (rc)	/* Error in transaction */
+		return rc;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == SCH_QUICK))
+		return 0;
+
+	switch (size) {
+	case SCH_BYTE:
+	case SCH_BYTE_DATA:
+		data->byte = inb(SMBHSTDAT0);
+		break;
+	case SCH_WORD_DATA:
+		data->word = inb(SMBHSTDAT0) + (inb(SMBHSTDAT1) << 8);
+		break;
+	case SCH_BLOCK_DATA:
+		data->block[0] = inb(SMBHSTDAT0);
+		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb(SMBBLKDAT+i-1);
+		break;
+	}
+	return 0;
+}
+
+static u32 sch_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sch_access,
+	.functionality	= sch_func,
+};
+
+static struct i2c_adapter sch_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static int smbus_sch_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	int retval;
+
+	res = platform_get_resource(dev, IORESOURCE_IO, 0);
+	if (!res)
+		return -EBUSY;
+
+	if (!devm_request_region(&dev->dev, res->start, resource_size(res),
+				 dev->name)) {
+		dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
+			sch_smba);
+		return -EBUSY;
+	}
+
+	sch_smba = res->start;
+
+	dev_dbg(&dev->dev, "SMBA = 0x%X\n", sch_smba);
+
+	/* set up the sysfs linkage to our parent device */
+	sch_adapter.dev.parent = &dev->dev;
+
+	snprintf(sch_adapter.name, sizeof(sch_adapter.name),
+		"SMBus SCH adapter at %04x", sch_smba);
+
+	retval = i2c_add_adapter(&sch_adapter);
+	if (retval)
+		sch_smba = 0;
+
+	return retval;
+}
+
+static int smbus_sch_remove(struct platform_device *pdev)
+{
+	if (sch_smba) {
+		i2c_del_adapter(&sch_adapter);
+		sch_smba = 0;
+	}
+
+	return 0;
+}
+
+static struct platform_driver smbus_sch_driver = {
+	.driver = {
+		.name = "isch_smbus",
+	},
+	.probe		= smbus_sch_probe,
+	.remove		= smbus_sch_remove,
+};
+
+module_platform_driver(smbus_sch_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>");
+MODULE_DESCRIPTION("Intel SCH SMBus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:isch_smbus");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ismt.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ismt.c
new file mode 100644
index 0000000..b51adff
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ismt.c
@@ -0,0 +1,957 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2012 Intel Corporation. All rights reserved.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ *  Supports the SMBus Message Transport (SMT) in the Intel Atom Processor
+ *  S12xx Product Family.
+ *
+ *  Features supported by this driver:
+ *  Hardware PEC                     yes
+ *  Block buffer                     yes
+ *  Block process call transaction   no
+ *  Slave mode                       no
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+/* PCI Address Constants */
+#define SMBBAR		0
+
+/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
+#define PCI_DEVICE_ID_INTEL_S1200_SMT0	0x0c59
+#define PCI_DEVICE_ID_INTEL_S1200_SMT1	0x0c5a
+#define PCI_DEVICE_ID_INTEL_DNV_SMT	0x19ac
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMT	0x1f15
+
+#define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
+#define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
+
+/* Hardware Descriptor Constants - Control Field */
+#define ISMT_DESC_CWRL	0x01	/* Command/Write Length */
+#define ISMT_DESC_BLK	0X04	/* Perform Block Transaction */
+#define ISMT_DESC_FAIR	0x08	/* Set fairness flag upon successful arbit. */
+#define ISMT_DESC_PEC	0x10	/* Packet Error Code */
+#define ISMT_DESC_I2C	0x20	/* I2C Enable */
+#define ISMT_DESC_INT	0x40	/* Interrupt */
+#define ISMT_DESC_SOE	0x80	/* Stop On Error */
+
+/* Hardware Descriptor Constants - Status Field */
+#define ISMT_DESC_SCS	0x01	/* Success */
+#define ISMT_DESC_DLTO	0x04	/* Data Low Time Out */
+#define ISMT_DESC_NAK	0x08	/* NAK Received */
+#define ISMT_DESC_CRC	0x10	/* CRC Error */
+#define ISMT_DESC_CLTO	0x20	/* Clock Low Time Out */
+#define ISMT_DESC_COL	0x40	/* Collisions */
+#define ISMT_DESC_LPR	0x80	/* Large Packet Received */
+
+/* Macros */
+#define ISMT_DESC_ADDR_RW(addr, rw) (((addr) << 1) | (rw))
+
+/* iSMT General Register address offsets (SMBBAR + <addr>) */
+#define ISMT_GR_GCTRL		0x000	/* General Control */
+#define ISMT_GR_SMTICL		0x008	/* SMT Interrupt Cause Location */
+#define ISMT_GR_ERRINTMSK	0x010	/* Error Interrupt Mask */
+#define ISMT_GR_ERRAERMSK	0x014	/* Error AER Mask */
+#define ISMT_GR_ERRSTS		0x018	/* Error Status */
+#define ISMT_GR_ERRINFO		0x01c	/* Error Information */
+
+/* iSMT Master Registers */
+#define ISMT_MSTR_MDBA		0x100	/* Master Descriptor Base Address */
+#define ISMT_MSTR_MCTRL		0x108	/* Master Control */
+#define ISMT_MSTR_MSTS		0x10c	/* Master Status */
+#define ISMT_MSTR_MDS		0x110	/* Master Descriptor Size */
+#define ISMT_MSTR_RPOLICY	0x114	/* Retry Policy */
+
+/* iSMT Miscellaneous Registers */
+#define ISMT_SPGT	0x300	/* SMBus PHY Global Timing */
+
+/* General Control Register (GCTRL) bit definitions */
+#define ISMT_GCTRL_TRST	0x04	/* Target Reset */
+#define ISMT_GCTRL_KILL	0x08	/* Kill */
+#define ISMT_GCTRL_SRST	0x40	/* Soft Reset */
+
+/* Master Control Register (MCTRL) bit definitions */
+#define ISMT_MCTRL_SS	0x01		/* Start/Stop */
+#define ISMT_MCTRL_MEIE	0x10		/* Master Error Interrupt Enable */
+#define ISMT_MCTRL_FMHP	0x00ff0000	/* Firmware Master Head Ptr (FMHP) */
+
+/* Master Status Register (MSTS) bit definitions */
+#define ISMT_MSTS_HMTP	0xff0000	/* HW Master Tail Pointer (HMTP) */
+#define ISMT_MSTS_MIS	0x20		/* Master Interrupt Status (MIS) */
+#define ISMT_MSTS_MEIS	0x10		/* Master Error Int Status (MEIS) */
+#define ISMT_MSTS_IP	0x01		/* In Progress */
+
+/* Master Descriptor Size (MDS) bit definitions */
+#define ISMT_MDS_MASK	0xff	/* Master Descriptor Size mask (MDS) */
+
+/* SMBus PHY Global Timing Register (SPGT) bit definitions */
+#define ISMT_SPGT_SPD_MASK	0xc0000000	/* SMBus Speed mask */
+#define ISMT_SPGT_SPD_80K	0x00		/* 80 kHz */
+#define ISMT_SPGT_SPD_100K	(0x1 << 30)	/* 100 kHz */
+#define ISMT_SPGT_SPD_400K	(0x2 << 30)	/* 400 kHz */
+#define ISMT_SPGT_SPD_1M	(0x3 << 30)	/* 1 MHz */
+
+
+/* MSI Control Register (MSICTL) bit definitions */
+#define ISMT_MSICTL_MSIE	0x01	/* MSI Enable */
+
+/* iSMT Hardware Descriptor */
+struct ismt_desc {
+	u8 tgtaddr_rw;	/* target address & r/w bit */
+	u8 wr_len_cmd;	/* write length in bytes or a command */
+	u8 rd_len;	/* read length */
+	u8 control;	/* control bits */
+	u8 status;	/* status bits */
+	u8 retry;	/* collision retry and retry count */
+	u8 rxbytes;	/* received bytes */
+	u8 txbytes;	/* transmitted bytes */
+	u32 dptr_low;	/* lower 32 bit of the data pointer */
+	u32 dptr_high;	/* upper 32 bit of the data pointer */
+} __packed;
+
+struct ismt_priv {
+	struct i2c_adapter adapter;
+	void __iomem *smba;			/* PCI BAR */
+	struct pci_dev *pci_dev;
+	struct ismt_desc *hw;			/* descriptor virt base addr */
+	dma_addr_t io_rng_dma;			/* descriptor HW base addr */
+	u8 head;				/* ring buffer head pointer */
+	struct completion cmp;			/* interrupt completion */
+	u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1];	/* temp R/W data buffer */
+};
+
+/**
+ * ismt_ids - PCI device IDs supported by this driver
+ */
+static const struct pci_device_id ismt_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ismt_ids);
+
+/* Bus speed control bits for slow debuggers - refer to the docs for usage */
+static unsigned int bus_speed;
+module_param(bus_speed, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)");
+
+/**
+ * __ismt_desc_dump() - dump the contents of a specific descriptor
+ */
+static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc)
+{
+
+	dev_dbg(dev, "Descriptor struct:  %p\n", desc);
+	dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw);
+	dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd);
+	dev_dbg(dev, "\trd_len=    0x%02X\n", desc->rd_len);
+	dev_dbg(dev, "\tcontrol=   0x%02X\n", desc->control);
+	dev_dbg(dev, "\tstatus=    0x%02X\n", desc->status);
+	dev_dbg(dev, "\tretry=     0x%02X\n", desc->retry);
+	dev_dbg(dev, "\trxbytes=   0x%02X\n", desc->rxbytes);
+	dev_dbg(dev, "\ttxbytes=   0x%02X\n", desc->txbytes);
+	dev_dbg(dev, "\tdptr_low=  0x%08X\n", desc->dptr_low);
+	dev_dbg(dev, "\tdptr_high= 0x%08X\n", desc->dptr_high);
+}
+/**
+ * ismt_desc_dump() - dump the contents of a descriptor for debug purposes
+ * @priv: iSMT private data
+ */
+static void ismt_desc_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+	struct ismt_desc *desc = &priv->hw[priv->head];
+
+	dev_dbg(dev, "Dump of the descriptor struct:  0x%X\n", priv->head);
+	__ismt_desc_dump(dev, desc);
+}
+
+/**
+ * ismt_gen_reg_dump() - dump the iSMT General Registers
+ * @priv: iSMT private data
+ */
+static void ismt_gen_reg_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+
+	dev_dbg(dev, "Dump of the iSMT General Registers\n");
+	dev_dbg(dev, "  GCTRL.... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_GCTRL,
+		readl(priv->smba + ISMT_GR_GCTRL));
+	dev_dbg(dev, "  SMTICL... : (0x%p)=0x%016llX\n",
+		priv->smba + ISMT_GR_SMTICL,
+		(long long unsigned int)readq(priv->smba + ISMT_GR_SMTICL));
+	dev_dbg(dev, "  ERRINTMSK : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRINTMSK,
+		readl(priv->smba + ISMT_GR_ERRINTMSK));
+	dev_dbg(dev, "  ERRAERMSK : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRAERMSK,
+		readl(priv->smba + ISMT_GR_ERRAERMSK));
+	dev_dbg(dev, "  ERRSTS... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRSTS,
+		readl(priv->smba + ISMT_GR_ERRSTS));
+	dev_dbg(dev, "  ERRINFO.. : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRINFO,
+		readl(priv->smba + ISMT_GR_ERRINFO));
+}
+
+/**
+ * ismt_mstr_reg_dump() - dump the iSMT Master Registers
+ * @priv: iSMT private data
+ */
+static void ismt_mstr_reg_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+
+	dev_dbg(dev, "Dump of the iSMT Master Registers\n");
+	dev_dbg(dev, "  MDBA..... : (0x%p)=0x%016llX\n",
+		priv->smba + ISMT_MSTR_MDBA,
+		(long long unsigned int)readq(priv->smba + ISMT_MSTR_MDBA));
+	dev_dbg(dev, "  MCTRL.... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MCTRL,
+		readl(priv->smba + ISMT_MSTR_MCTRL));
+	dev_dbg(dev, "  MSTS..... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MSTS,
+		readl(priv->smba + ISMT_MSTR_MSTS));
+	dev_dbg(dev, "  MDS...... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MDS,
+		readl(priv->smba + ISMT_MSTR_MDS));
+	dev_dbg(dev, "  RPOLICY.. : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_RPOLICY,
+		readl(priv->smba + ISMT_MSTR_RPOLICY));
+	dev_dbg(dev, "  SPGT..... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_SPGT,
+		readl(priv->smba + ISMT_SPGT));
+}
+
+/**
+ * ismt_submit_desc() - add a descriptor to the ring
+ * @priv: iSMT private data
+ */
+static void ismt_submit_desc(struct ismt_priv *priv)
+{
+	uint fmhp;
+	uint val;
+
+	ismt_desc_dump(priv);
+	ismt_gen_reg_dump(priv);
+	ismt_mstr_reg_dump(priv);
+
+	/* Set the FMHP (Firmware Master Head Pointer)*/
+	fmhp = ((priv->head + 1) % ISMT_DESC_ENTRIES) << 16;
+	val = readl(priv->smba + ISMT_MSTR_MCTRL);
+	writel((val & ~ISMT_MCTRL_FMHP) | fmhp,
+	       priv->smba + ISMT_MSTR_MCTRL);
+
+	/* Set the start bit */
+	val = readl(priv->smba + ISMT_MSTR_MCTRL);
+	writel(val | ISMT_MCTRL_SS,
+	       priv->smba + ISMT_MSTR_MCTRL);
+}
+
+/**
+ * ismt_process_desc() - handle the completion of the descriptor
+ * @desc: the iSMT hardware descriptor
+ * @data: data buffer from the upper layer
+ * @priv: ismt_priv struct holding our dma buffer
+ * @size: SMBus transaction type
+ * @read_write: flag to indicate if this is a read or write
+ */
+static int ismt_process_desc(const struct ismt_desc *desc,
+			     union i2c_smbus_data *data,
+			     struct ismt_priv *priv, int size,
+			     char read_write)
+{
+	u8 *dma_buffer = priv->dma_buffer;
+
+	dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n");
+	__ismt_desc_dump(&priv->pci_dev->dev, desc);
+
+	if (desc->status & ISMT_DESC_SCS) {
+		if (read_write == I2C_SMBUS_WRITE &&
+		    size != I2C_SMBUS_PROC_CALL)
+			return 0;
+
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = dma_buffer[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = dma_buffer[0] | (dma_buffer[1] << 8);
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+			if (desc->rxbytes != dma_buffer[0] + 1)
+				return -EMSGSIZE;
+
+			memcpy(data->block, dma_buffer, desc->rxbytes);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			memcpy(&data->block[1], dma_buffer, desc->rxbytes);
+			data->block[0] = desc->rxbytes;
+			break;
+		}
+		return 0;
+	}
+
+	if (likely(desc->status & ISMT_DESC_NAK))
+		return -ENXIO;
+
+	if (desc->status & ISMT_DESC_CRC)
+		return -EBADMSG;
+
+	if (desc->status & ISMT_DESC_COL)
+		return -EAGAIN;
+
+	if (desc->status & ISMT_DESC_LPR)
+		return -EPROTO;
+
+	if (desc->status & (ISMT_DESC_DLTO | ISMT_DESC_CLTO))
+		return -ETIMEDOUT;
+
+	return -EIO;
+}
+
+/**
+ * ismt_access() - process an SMBus command
+ * @adap: the i2c host adapter
+ * @addr: address of the i2c/SMBus target
+ * @flags: command options
+ * @read_write: read from or write to device
+ * @command: the i2c/SMBus command to issue
+ * @size: SMBus transaction type
+ * @data: read/write data buffer
+ */
+static int ismt_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	int ret;
+	unsigned long time_left;
+	dma_addr_t dma_addr = 0; /* address of the data buffer */
+	u8 dma_size = 0;
+	enum dma_data_direction dma_direction = 0;
+	struct ismt_desc *desc;
+	struct ismt_priv *priv = i2c_get_adapdata(adap);
+	struct device *dev = &priv->pci_dev->dev;
+
+	desc = &priv->hw[priv->head];
+
+	/* Initialize the DMA buffer */
+	memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
+
+	/* Initialize the descriptor */
+	memset(desc, 0, sizeof(struct ismt_desc));
+	desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
+
+	/* Initialize common control bits */
+	if (likely(pci_dev_msi_enabled(priv->pci_dev)))
+		desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
+	else
+		desc->control = ISMT_DESC_FAIR;
+
+	if ((flags & I2C_CLIENT_PEC) && (size != I2C_SMBUS_QUICK)
+	    && (size != I2C_SMBUS_I2C_BLOCK_DATA))
+		desc->control |= ISMT_DESC_PEC;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		dev_dbg(dev, "I2C_SMBUS_QUICK\n");
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/*
+			 * Send Byte
+			 * The command field contains the write data
+			 */
+			dev_dbg(dev, "I2C_SMBUS_BYTE:  WRITE\n");
+			desc->control |= ISMT_DESC_CWRL;
+			desc->wr_len_cmd = command;
+		} else {
+			/* Receive Byte */
+			dev_dbg(dev, "I2C_SMBUS_BYTE:  READ\n");
+			dma_size = 1;
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = 1;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/*
+			 * Write Byte
+			 * Command plus 1 data byte
+			 */
+			dev_dbg(dev, "I2C_SMBUS_BYTE_DATA:  WRITE\n");
+			desc->wr_len_cmd = 2;
+			dma_size = 2;
+			dma_direction = DMA_TO_DEVICE;
+			priv->dma_buffer[0] = command;
+			priv->dma_buffer[1] = data->byte;
+		} else {
+			/* Read Byte */
+			dev_dbg(dev, "I2C_SMBUS_BYTE_DATA:  READ\n");
+			desc->control |= ISMT_DESC_CWRL;
+			desc->wr_len_cmd = command;
+			desc->rd_len = 1;
+			dma_size = 1;
+			dma_direction = DMA_FROM_DEVICE;
+		}
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* Write Word */
+			dev_dbg(dev, "I2C_SMBUS_WORD_DATA:  WRITE\n");
+			desc->wr_len_cmd = 3;
+			dma_size = 3;
+			dma_direction = DMA_TO_DEVICE;
+			priv->dma_buffer[0] = command;
+			priv->dma_buffer[1] = data->word & 0xff;
+			priv->dma_buffer[2] = data->word >> 8;
+		} else {
+			/* Read Word */
+			dev_dbg(dev, "I2C_SMBUS_WORD_DATA:  READ\n");
+			desc->wr_len_cmd = command;
+			desc->control |= ISMT_DESC_CWRL;
+			desc->rd_len = 2;
+			dma_size = 2;
+			dma_direction = DMA_FROM_DEVICE;
+		}
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+		dev_dbg(dev, "I2C_SMBUS_PROC_CALL\n");
+		desc->wr_len_cmd = 3;
+		desc->rd_len = 2;
+		dma_size = 3;
+		dma_direction = DMA_BIDIRECTIONAL;
+		priv->dma_buffer[0] = command;
+		priv->dma_buffer[1] = data->word & 0xff;
+		priv->dma_buffer[2] = data->word >> 8;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* Block Write */
+			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  WRITE\n");
+			dma_size = data->block[0] + 1;
+			dma_direction = DMA_TO_DEVICE;
+			desc->wr_len_cmd = dma_size;
+			desc->control |= ISMT_DESC_BLK;
+			priv->dma_buffer[0] = command;
+			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+		} else {
+			/* Block Read */
+			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  READ\n");
+			dma_size = I2C_SMBUS_BLOCK_MAX;
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = dma_size;
+			desc->wr_len_cmd = command;
+			desc->control |= (ISMT_DESC_BLK | ISMT_DESC_CWRL);
+		}
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/* Make sure the length is valid */
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* i2c Block Write */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  WRITE\n");
+			dma_size = data->block[0] + 1;
+			dma_direction = DMA_TO_DEVICE;
+			desc->wr_len_cmd = dma_size;
+			desc->control |= ISMT_DESC_I2C;
+			priv->dma_buffer[0] = command;
+			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+		} else {
+			/* i2c Block Read */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  READ\n");
+			dma_size = data->block[0];
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = dma_size;
+			desc->wr_len_cmd = command;
+			desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL);
+			/*
+			 * Per the "Table 15-15. I2C Commands",
+			 * in the External Design Specification (EDS),
+			 * (Document Number: 508084, Revision: 2.0),
+			 * the _rw bit must be 0
+			 */
+			desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0);
+		}
+		break;
+
+	default:
+		dev_err(dev, "Unsupported transaction %d\n",
+			size);
+		return -EOPNOTSUPP;
+	}
+
+	/* map the data buffer */
+	if (dma_size != 0) {
+		dev_dbg(dev, " dev=%p\n", dev);
+		dev_dbg(dev, " data=%p\n", data);
+		dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer);
+		dev_dbg(dev, " dma_size=%d\n", dma_size);
+		dev_dbg(dev, " dma_direction=%d\n", dma_direction);
+
+		dma_addr = dma_map_single(dev,
+				      priv->dma_buffer,
+				      dma_size,
+				      dma_direction);
+
+		if (dma_mapping_error(dev, dma_addr)) {
+			dev_err(dev, "Error in mapping dma buffer %p\n",
+				priv->dma_buffer);
+			return -EIO;
+		}
+
+		dev_dbg(dev, " dma_addr = 0x%016llX\n",
+			(unsigned long long)dma_addr);
+
+		desc->dptr_low = lower_32_bits(dma_addr);
+		desc->dptr_high = upper_32_bits(dma_addr);
+	}
+
+	reinit_completion(&priv->cmp);
+
+	/* Add the descriptor */
+	ismt_submit_desc(priv);
+
+	/* Now we wait for interrupt completion, 1s */
+	time_left = wait_for_completion_timeout(&priv->cmp, HZ*1);
+
+	/* unmap the data buffer */
+	if (dma_size != 0)
+		dma_unmap_single(dev, dma_addr, dma_size, dma_direction);
+
+	if (unlikely(!time_left)) {
+		dev_err(dev, "completion wait timed out\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* do any post processing of the descriptor here */
+	ret = ismt_process_desc(desc, data, priv, size, read_write);
+
+out:
+	/* Update the ring pointer */
+	priv->head++;
+	priv->head %= ISMT_DESC_ENTRIES;
+
+	return ret;
+}
+
+/**
+ * ismt_func() - report which i2c commands are supported by this adapter
+ * @adap: the i2c host adapter
+ */
+static u32 ismt_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_QUICK		|
+	       I2C_FUNC_SMBUS_BYTE		|
+	       I2C_FUNC_SMBUS_BYTE_DATA		|
+	       I2C_FUNC_SMBUS_WORD_DATA		|
+	       I2C_FUNC_SMBUS_PROC_CALL		|
+	       I2C_FUNC_SMBUS_BLOCK_DATA	|
+	       I2C_FUNC_SMBUS_I2C_BLOCK		|
+	       I2C_FUNC_SMBUS_PEC;
+}
+
+/**
+ * smbus_algorithm - the adapter algorithm and supported functionality
+ * @smbus_xfer: the adapter algorithm
+ * @functionality: functionality supported by the adapter
+ */
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= ismt_access,
+	.functionality	= ismt_func,
+};
+
+/**
+ * ismt_handle_isr() - interrupt handler bottom half
+ * @priv: iSMT private data
+ */
+static irqreturn_t ismt_handle_isr(struct ismt_priv *priv)
+{
+	complete(&priv->cmp);
+
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * ismt_do_interrupt() - IRQ interrupt handler
+ * @vec: interrupt vector
+ * @data: iSMT private data
+ */
+static irqreturn_t ismt_do_interrupt(int vec, void *data)
+{
+	u32 val;
+	struct ismt_priv *priv = data;
+
+	/*
+	 * check to see it's our interrupt, return IRQ_NONE if not ours
+	 * since we are sharing interrupt
+	 */
+	val = readl(priv->smba + ISMT_MSTR_MSTS);
+
+	if (!(val & (ISMT_MSTS_MIS | ISMT_MSTS_MEIS)))
+		return IRQ_NONE;
+	else
+		writel(val | ISMT_MSTS_MIS | ISMT_MSTS_MEIS,
+		       priv->smba + ISMT_MSTR_MSTS);
+
+	return ismt_handle_isr(priv);
+}
+
+/**
+ * ismt_do_msi_interrupt() - MSI interrupt handler
+ * @vec: interrupt vector
+ * @data: iSMT private data
+ */
+static irqreturn_t ismt_do_msi_interrupt(int vec, void *data)
+{
+	return ismt_handle_isr(data);
+}
+
+/**
+ * ismt_hw_init() - initialize the iSMT hardware
+ * @priv: iSMT private data
+ */
+static void ismt_hw_init(struct ismt_priv *priv)
+{
+	u32 val;
+	struct device *dev = &priv->pci_dev->dev;
+
+	/* initialize the Master Descriptor Base Address (MDBA) */
+	writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
+
+	/* initialize the Master Control Register (MCTRL) */
+	writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
+
+	/* initialize the Master Status Register (MSTS) */
+	writel(0, priv->smba + ISMT_MSTR_MSTS);
+
+	/* initialize the Master Descriptor Size (MDS) */
+	val = readl(priv->smba + ISMT_MSTR_MDS);
+	writel((val & ~ISMT_MDS_MASK) | (ISMT_DESC_ENTRIES - 1),
+		priv->smba + ISMT_MSTR_MDS);
+
+	/*
+	 * Set the SMBus speed (could use this for slow HW debuggers)
+	 */
+
+	val = readl(priv->smba + ISMT_SPGT);
+
+	switch (bus_speed) {
+	case 0:
+		break;
+
+	case 80:
+		dev_dbg(dev, "Setting SMBus clock to 80 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_80K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 100:
+		dev_dbg(dev, "Setting SMBus clock to 100 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_100K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 400:
+		dev_dbg(dev, "Setting SMBus clock to 400 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_400K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 1000:
+		dev_dbg(dev, "Setting SMBus clock to 1000 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_1M),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	default:
+		dev_warn(dev, "Invalid SMBus clock speed, only 0, 80, 100, 400, and 1000 are valid\n");
+		break;
+	}
+
+	val = readl(priv->smba + ISMT_SPGT);
+
+	switch (val & ISMT_SPGT_SPD_MASK) {
+	case ISMT_SPGT_SPD_80K:
+		bus_speed = 80;
+		break;
+	case ISMT_SPGT_SPD_100K:
+		bus_speed = 100;
+		break;
+	case ISMT_SPGT_SPD_400K:
+		bus_speed = 400;
+		break;
+	case ISMT_SPGT_SPD_1M:
+		bus_speed = 1000;
+		break;
+	}
+	dev_dbg(dev, "SMBus clock is running at %d kHz\n", bus_speed);
+}
+
+/**
+ * ismt_dev_init() - initialize the iSMT data structures
+ * @priv: iSMT private data
+ */
+static int ismt_dev_init(struct ismt_priv *priv)
+{
+	/* allocate memory for the descriptor */
+	priv->hw = dmam_alloc_coherent(&priv->pci_dev->dev,
+				       (ISMT_DESC_ENTRIES
+					       * sizeof(struct ismt_desc)),
+				       &priv->io_rng_dma,
+				       GFP_KERNEL);
+	if (!priv->hw)
+		return -ENOMEM;
+
+	memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc)));
+
+	priv->head = 0;
+	init_completion(&priv->cmp);
+
+	return 0;
+}
+
+/**
+ * ismt_int_init() - initialize interrupts
+ * @priv: iSMT private data
+ */
+static int ismt_int_init(struct ismt_priv *priv)
+{
+	int err;
+
+	/* Try using MSI interrupts */
+	err = pci_enable_msi(priv->pci_dev);
+	if (err)
+		goto intx;
+
+	err = devm_request_irq(&priv->pci_dev->dev,
+			       priv->pci_dev->irq,
+			       ismt_do_msi_interrupt,
+			       0,
+			       "ismt-msi",
+			       priv);
+	if (err) {
+		pci_disable_msi(priv->pci_dev);
+		goto intx;
+	}
+
+	return 0;
+
+	/* Try using legacy interrupts */
+intx:
+	dev_warn(&priv->pci_dev->dev,
+		 "Unable to use MSI interrupts, falling back to legacy\n");
+
+	err = devm_request_irq(&priv->pci_dev->dev,
+			       priv->pci_dev->irq,
+			       ismt_do_interrupt,
+			       IRQF_SHARED,
+			       "ismt-intx",
+			       priv);
+	if (err) {
+		dev_err(&priv->pci_dev->dev, "no usable interrupts\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static struct pci_driver ismt_driver;
+
+/**
+ * ismt_probe() - probe for iSMT devices
+ * @pdev: PCI-Express device
+ * @id: PCI-Express device ID
+ */
+static int
+ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int err;
+	struct ismt_priv *priv;
+	unsigned long start, len;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, priv);
+
+	i2c_set_adapdata(&priv->adapter, priv);
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = I2C_CLASS_HWMON;
+	priv->adapter.algo = &smbus_algorithm;
+	priv->adapter.dev.parent = &pdev->dev;
+	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
+	priv->adapter.retries = ISMT_MAX_RETRIES;
+
+	priv->pci_dev = pdev;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		return err;
+	}
+
+	/* enable bus mastering */
+	pci_set_master(pdev);
+
+	/* Determine the address of the SMBus area */
+	start = pci_resource_start(pdev, SMBBAR);
+	len = pci_resource_len(pdev, SMBBAR);
+	if (!start || !len) {
+		dev_err(&pdev->dev,
+			"SMBus base address uninitialized, upgrade BIOS\n");
+		return -ENODEV;
+	}
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		 "SMBus iSMT adapter at %lx", start);
+
+	dev_dbg(&priv->pci_dev->dev, " start=0x%lX\n", start);
+	dev_dbg(&priv->pci_dev->dev, " len=0x%lX\n", len);
+
+	err = acpi_check_resource_conflict(&pdev->resource[SMBBAR]);
+	if (err) {
+		dev_err(&pdev->dev, "ACPI resource conflict!\n");
+		return err;
+	}
+
+	err = pci_request_region(pdev, SMBBAR, ismt_driver.name);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Failed to request SMBus region 0x%lx-0x%lx\n",
+			start, start + len);
+		return err;
+	}
+
+	priv->smba = pcim_iomap(pdev, SMBBAR, len);
+	if (!priv->smba) {
+		dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n");
+		return -ENODEV;
+	}
+
+	if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
+	    (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
+		if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+		    (pci_set_consistent_dma_mask(pdev,
+						 DMA_BIT_MASK(32)) != 0)) {
+			dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n",
+				pdev);
+			return -ENODEV;
+		}
+	}
+
+	err = ismt_dev_init(priv);
+	if (err)
+		return err;
+
+	ismt_hw_init(priv);
+
+	err = ismt_int_init(priv);
+	if (err)
+		return err;
+
+	err = i2c_add_adapter(&priv->adapter);
+	if (err)
+		return -ENODEV;
+	return 0;
+}
+
+/**
+ * ismt_remove() - release driver resources
+ * @pdev: PCI-Express device
+ */
+static void ismt_remove(struct pci_dev *pdev)
+{
+	struct ismt_priv *priv = pci_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adapter);
+}
+
+static struct pci_driver ismt_driver = {
+	.name = "ismt_smbus",
+	.id_table = ismt_ids,
+	.probe = ismt_probe,
+	.remove = ismt_remove,
+};
+
+module_pci_driver(ismt_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Bill E. Brown <bill.e.brown@intel.com>");
+MODULE_DESCRIPTION("Intel SMBus Message Transport (iSMT) driver");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-jz4780.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-jz4780.c
new file mode 100644
index 0000000..41ca9ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-jz4780.c
@@ -0,0 +1,802 @@
+/*
+ * Ingenic JZ4780 I2C bus driver
+ *
+ * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#define JZ4780_I2C_CTRL		0x00
+#define JZ4780_I2C_TAR		0x04
+#define JZ4780_I2C_SAR		0x08
+#define JZ4780_I2C_DC		0x10
+#define JZ4780_I2C_SHCNT	0x14
+#define JZ4780_I2C_SLCNT	0x18
+#define JZ4780_I2C_FHCNT	0x1C
+#define JZ4780_I2C_FLCNT	0x20
+#define JZ4780_I2C_INTST	0x2C
+#define JZ4780_I2C_INTM		0x30
+#define JZ4780_I2C_RXTL		0x38
+#define JZ4780_I2C_TXTL		0x3C
+#define JZ4780_I2C_CINTR	0x40
+#define JZ4780_I2C_CRXUF	0x44
+#define JZ4780_I2C_CRXOF	0x48
+#define JZ4780_I2C_CTXOF	0x4C
+#define JZ4780_I2C_CRXREQ	0x50
+#define JZ4780_I2C_CTXABRT	0x54
+#define JZ4780_I2C_CRXDONE	0x58
+#define JZ4780_I2C_CACT		0x5C
+#define JZ4780_I2C_CSTP		0x60
+#define JZ4780_I2C_CSTT		0x64
+#define JZ4780_I2C_CGC		0x68
+#define JZ4780_I2C_ENB		0x6C
+#define JZ4780_I2C_STA		0x70
+#define JZ4780_I2C_TXABRT	0x80
+#define JZ4780_I2C_DMACR	0x88
+#define JZ4780_I2C_DMATDLR	0x8C
+#define JZ4780_I2C_DMARDLR	0x90
+#define JZ4780_I2C_SDASU	0x94
+#define JZ4780_I2C_ACKGC	0x98
+#define JZ4780_I2C_ENSTA	0x9C
+#define JZ4780_I2C_SDAHD	0xD0
+
+#define JZ4780_I2C_CTRL_STPHLD		BIT(7)
+#define JZ4780_I2C_CTRL_SLVDIS		BIT(6)
+#define JZ4780_I2C_CTRL_REST		BIT(5)
+#define JZ4780_I2C_CTRL_MATP		BIT(4)
+#define JZ4780_I2C_CTRL_SATP		BIT(3)
+#define JZ4780_I2C_CTRL_SPDF		BIT(2)
+#define JZ4780_I2C_CTRL_SPDS		BIT(1)
+#define JZ4780_I2C_CTRL_MD		BIT(0)
+
+#define JZ4780_I2C_STA_SLVACT		BIT(6)
+#define JZ4780_I2C_STA_MSTACT		BIT(5)
+#define JZ4780_I2C_STA_RFF		BIT(4)
+#define JZ4780_I2C_STA_RFNE		BIT(3)
+#define JZ4780_I2C_STA_TFE		BIT(2)
+#define JZ4780_I2C_STA_TFNF		BIT(1)
+#define JZ4780_I2C_STA_ACT		BIT(0)
+
+#define JZ4780_I2C_INTST_IGC		BIT(11)
+#define JZ4780_I2C_INTST_ISTT		BIT(10)
+#define JZ4780_I2C_INTST_ISTP		BIT(9)
+#define JZ4780_I2C_INTST_IACT		BIT(8)
+#define JZ4780_I2C_INTST_RXDN		BIT(7)
+#define JZ4780_I2C_INTST_TXABT		BIT(6)
+#define JZ4780_I2C_INTST_RDREQ		BIT(5)
+#define JZ4780_I2C_INTST_TXEMP		BIT(4)
+#define JZ4780_I2C_INTST_TXOF		BIT(3)
+#define JZ4780_I2C_INTST_RXFL		BIT(2)
+#define JZ4780_I2C_INTST_RXOF		BIT(1)
+#define JZ4780_I2C_INTST_RXUF		BIT(0)
+
+#define JZ4780_I2C_INTM_MIGC		BIT(11)
+#define JZ4780_I2C_INTM_MISTT		BIT(10)
+#define JZ4780_I2C_INTM_MISTP		BIT(9)
+#define JZ4780_I2C_INTM_MIACT		BIT(8)
+#define JZ4780_I2C_INTM_MRXDN		BIT(7)
+#define JZ4780_I2C_INTM_MTXABT		BIT(6)
+#define JZ4780_I2C_INTM_MRDREQ		BIT(5)
+#define JZ4780_I2C_INTM_MTXEMP		BIT(4)
+#define JZ4780_I2C_INTM_MTXOF		BIT(3)
+#define JZ4780_I2C_INTM_MRXFL		BIT(2)
+#define JZ4780_I2C_INTM_MRXOF		BIT(1)
+#define JZ4780_I2C_INTM_MRXUF		BIT(0)
+
+#define JZ4780_I2C_DC_READ		BIT(8)
+
+#define JZ4780_I2C_SDAHD_HDENB		BIT(8)
+
+#define JZ4780_I2C_ENB_I2C		BIT(0)
+
+#define JZ4780_I2CSHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CSLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+#define JZ4780_I2CFHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CFLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+
+#define JZ4780_I2C_FIFO_LEN	16
+#define TX_LEVEL		3
+#define RX_LEVEL		(JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
+
+#define JZ4780_I2C_TIMEOUT	300
+
+#define BUFSIZE 200
+
+struct jz4780_i2c {
+	void __iomem		*iomem;
+	int			 irq;
+	struct clk		*clk;
+	struct i2c_adapter	 adap;
+
+	/* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */
+	spinlock_t		lock;
+
+	/* beginning of lock scope */
+	unsigned char		*rbuf;
+	int			rd_total_len;
+	int			rd_data_xfered;
+	int			rd_cmd_xfered;
+
+	unsigned char		*wbuf;
+	int			wt_len;
+
+	int			is_write;
+	int			stop_hold;
+	int			speed;
+
+	int			data_buf[BUFSIZE];
+	int			cmd_buf[BUFSIZE];
+	int			cmd;
+
+	/* end of lock scope */
+	struct completion	trans_waitq;
+};
+
+static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c,
+					      unsigned long offset)
+{
+	return readw(i2c->iomem + offset);
+}
+
+static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c,
+				     unsigned long offset, unsigned short val)
+{
+	writew(val, i2c->iomem + offset);
+}
+
+static int jz4780_i2c_disable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (!(regval & JZ4780_I2C_ENB_I2C))
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_enable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (regval & JZ4780_I2C_ENB_I2C)
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+		if ((regval & JZ4780_I2C_STA_TFE) &&
+		    !(regval & JZ4780_I2C_STA_MSTACT))
+			break;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	if (loops) {
+		jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address);
+		return 0;
+	}
+
+	dev_err(&i2c->adap.dev,
+		"set device to address 0x%02x failed, STA=0x%04x\n",
+		address, regval);
+
+	return -ENXIO;
+}
+
+static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c)
+{
+	int dev_clk_khz = clk_get_rate(i2c->clk) / 1000;
+	int cnt_high = 0;	/* HIGH period count of the SCL clock */
+	int cnt_low = 0;	/* LOW period count of the SCL clock */
+	int cnt_period = 0;	/* period count of the SCL clock */
+	int setup_time = 0;
+	int hold_time = 0;
+	unsigned short tmp = 0;
+	int i2c_clk = i2c->speed;
+
+	if (jz4780_i2c_disable(i2c))
+		dev_dbg(&i2c->adap.dev, "i2c not disabled\n");
+
+	/*
+	 * 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk)
+	 * standard mode, min LOW and HIGH period are 4700 ns and 4000 ns
+	 * fast mode, min LOW and HIGH period are 1300 ns and 600 ns
+	 */
+	cnt_period = dev_clk_khz / i2c_clk;
+
+	if (i2c_clk <= 100)
+		cnt_high = (cnt_period * 4000) / (4700 + 4000);
+	else
+		cnt_high = (cnt_period * 600) / (1300 + 600);
+
+	cnt_low = cnt_period - cnt_high;
+
+	/*
+	 * NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because
+	 * normal read are 2 messages, we cannot disable i2c controller
+	 * between these two messages, this means that we must always set
+	 * JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL
+	 *
+	 */
+	if (i2c_clk <= 100) {
+		tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT,
+				  JZ4780_I2CSHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT,
+				  JZ4780_I2CSLCNT_ADJUST(cnt_low));
+	} else {
+		tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT,
+				  JZ4780_I2CFHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT,
+				  JZ4780_I2CFLCNT_ADJUST(cnt_low));
+	}
+
+	/*
+	 * a i2c device must internally provide a hold time at least 300ns
+	 * tHD:DAT
+	 *	Standard Mode: min=300ns, max=3450ns
+	 *	Fast Mode: min=0ns, max=900ns
+	 * tSU:DAT
+	 *	Standard Mode: min=250ns, max=infinite
+	 *	Fast Mode: min=100(250ns is recommended), max=infinite
+	 *
+	 * 1i2c_clk = 10^6 / dev_clk_khz
+	 * on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns
+	 * on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns
+	 *
+	 * The actual hold time is (SDAHD + 1) * (i2c_clk period).
+	 *
+	 * Length of setup time calculated using (SDASU - 1) * (ic_clk_period)
+	 *
+	 */
+	if (i2c_clk <= 100) { /* standard mode */
+		setup_time = 300;
+		hold_time = 400;
+	} else {
+		setup_time = 450;
+		hold_time = 450;
+	}
+
+	hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1;
+	setup_time = ((setup_time * dev_clk_khz) / 1000000)  + 1;
+
+	if (setup_time > 255)
+		setup_time = 255;
+
+	if (setup_time <= 0)
+		setup_time = 1;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time);
+
+	if (hold_time > 255)
+		hold_time = 255;
+
+	if (hold_time >= 0) {
+		/*i2c hold time enable */
+		hold_time |= JZ4780_I2C_SDAHD_HDENB;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
+	} else {
+		/* disable hold time */
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
+	}
+
+	return 0;
+}
+
+static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c)
+{
+	int ret;
+	unsigned long flags;
+	unsigned short tmp;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	/* can send stop now if need */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	/* disable all interrupts first */
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+
+	/* then clear all interrupts */
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT);
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR);
+
+	/* then disable the controller */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+	udelay(10);
+	tmp |= JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	ret = jz4780_i2c_disable(i2c);
+	if (ret)
+		dev_err(&i2c->adap.dev,
+			"unable to disable device during cleanup!\n");
+
+	if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM)
+		     & jz4780_i2c_readw(i2c, JZ4780_I2C_INTST)))
+		dev_err(&i2c->adap.dev,
+			"device has interrupts after a complete cleanup!\n");
+
+	return ret;
+}
+
+static int jz4780_i2c_prepare(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_set_speed(i2c);
+	return jz4780_i2c_enable(i2c);
+}
+
+static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
+{
+	int i;
+
+	for (i = 0; i < cmd_count; i++)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
+}
+
+static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+	complete(&i2c->trans_waitq);
+}
+
+static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
+{
+	unsigned short tmp;
+	unsigned short intst;
+	unsigned short intmsk;
+	struct jz4780_i2c *i2c = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+	intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST);
+
+	intst &= intmsk;
+
+	if (intst & JZ4780_I2C_INTST_TXABT) {
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	if (intst & JZ4780_I2C_INTST_RXOF) {
+		dev_dbg(&i2c->adap.dev, "received fifo overflow!\n");
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	/*
+	 * When reading, always drain RX FIFO before we send more Read
+	 * Commands to avoid fifo overrun
+	 */
+	if (i2c->is_write == 0) {
+		int rd_left;
+
+		while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA)
+				  & JZ4780_I2C_STA_RFNE)) {
+			*(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC)
+					 & 0xff;
+			i2c->rd_data_xfered++;
+			if (i2c->rd_data_xfered == i2c->rd_total_len) {
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+
+		rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
+
+		if (rd_left <= JZ4780_I2C_FIFO_LEN)
+			jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
+	}
+
+	if (intst & JZ4780_I2C_INTST_TXEMP) {
+		if (i2c->is_write == 0) {
+			int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			int max_send = (JZ4780_I2C_FIFO_LEN - 1)
+					 - (i2c->rd_cmd_xfered
+					 - i2c->rd_data_xfered);
+			int cmd_to_send = min(cmd_left, max_send);
+
+			if (i2c->rd_cmd_xfered != 0)
+				cmd_to_send = min(cmd_to_send,
+						  JZ4780_I2C_FIFO_LEN
+						  - TX_LEVEL - 1);
+
+			if (cmd_to_send) {
+				jz4780_i2c_send_rcmd(i2c, cmd_to_send);
+				i2c->rd_cmd_xfered += cmd_to_send;
+			}
+
+			cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			if (cmd_left == 0) {
+				intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+				intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
+
+				tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+				tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+			}
+		} else {
+			unsigned short data;
+			unsigned short i2c_sta;
+
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
+			       (i2c->wt_len > 0)) {
+				i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+				data = *i2c->wbuf;
+				data &= ~JZ4780_I2C_DC_READ;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
+						  data);
+				i2c->wbuf++;
+				i2c->wt_len--;
+			}
+
+			if (i2c->wt_len == 0) {
+				if (!i2c->stop_hold) {
+					tmp = jz4780_i2c_readw(i2c,
+							       JZ4780_I2C_CTRL);
+					tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+					jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
+							  tmp);
+				}
+
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+	}
+
+done:
+	spin_unlock_irqrestore(&i2c->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
+{
+	dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n",
+		src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]);
+}
+
+static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
+				       unsigned char *buf, int len, int cnt,
+				       int idx)
+{
+	int ret = 0;
+	long timeout;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	unsigned short tmp;
+	unsigned long flags;
+
+	memset(buf, 0, len);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	i2c->stop_hold = 0;
+	i2c->is_write = 0;
+	i2c->rbuf = buf;
+	i2c->rd_total_len = len;
+	i2c->rd_data_xfered = 0;
+	i2c->rd_cmd_xfered = 0;
+
+	if (len <= JZ4780_I2C_FIFO_LEN)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
+	else
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
+			  JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
+			  | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "irq read timeout\n");
+		dev_dbg(&i2c->adap.dev, "send cmd count:%d  %d\n",
+			i2c->cmd, i2c->cmd_buf[i2c->cmd]);
+		dev_dbg(&i2c->adap.dev, "receive data count:%d  %d\n",
+			i2c->cmd, i2c->data_buf[i2c->cmd]);
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
+					unsigned char *buf, int len,
+					int cnt, int idx)
+{
+	int ret = 0;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	long timeout;
+	unsigned short tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	if (idx < (cnt - 1))
+		i2c->stop_hold = 1;
+	else
+		i2c->stop_hold = 0;
+
+	i2c->is_write = 1;
+	i2c->wbuf = buf;
+	i2c->wt_len = len;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
+					| JZ4780_I2C_INTM_MTXABT);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+	if (timeout && !i2c->stop_hold) {
+		unsigned short i2c_sta;
+		int write_in_process;
+
+		timeout = JZ4780_I2C_TIMEOUT * 100;
+		for (; timeout > 0; timeout--) {
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) ||
+				!(i2c_sta & JZ4780_I2C_STA_TFE);
+			if (!write_in_process)
+				break;
+			udelay(10);
+		}
+	}
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "write wait timeout\n");
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+			   int count)
+{
+	int i = -EIO;
+	int ret = 0;
+	struct jz4780_i2c *i2c = adap->algo_data;
+
+	ret = jz4780_i2c_prepare(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "I2C prepare failed\n");
+		goto out;
+	}
+
+	if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) {
+		ret = jz4780_i2c_set_target(i2c, msg->addr);
+		if (ret)
+			goto out;
+	}
+	for (i = 0; i < count; i++, msg++) {
+		if (msg->flags & I2C_M_RD)
+			ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len,
+						   count, i);
+		else
+			ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len,
+						    count, i);
+
+		if (ret)
+			goto out;
+	}
+
+	ret = i;
+
+out:
+	jz4780_i2c_cleanup(i2c);
+	return ret;
+}
+
+static u32 jz4780_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm jz4780_i2c_algorithm = {
+	.master_xfer	= jz4780_i2c_xfer,
+	.functionality	= jz4780_i2c_functionality,
+};
+
+static const struct of_device_id jz4780_i2c_of_matches[] = {
+	{ .compatible = "ingenic,jz4780-i2c", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
+
+static int jz4780_i2c_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned int clk_freq = 0;
+	unsigned short tmp;
+	struct resource *r;
+	struct jz4780_i2c *i2c;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->adap.owner		= THIS_MODULE;
+	i2c->adap.algo		= &jz4780_i2c_algorithm;
+	i2c->adap.algo_data	= i2c;
+	i2c->adap.retries	= 5;
+	i2c->adap.dev.parent	= &pdev->dev;
+	i2c->adap.dev.of_node	= pdev->dev.of_node;
+	sprintf(i2c->adap.name, "%s", pdev->name);
+
+	init_completion(&i2c->trans_waitq);
+	spin_lock_init(&i2c->lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(i2c->iomem))
+		return PTR_ERR(i2c->iomem);
+
+	platform_set_drvdata(pdev, i2c);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return PTR_ERR(i2c->clk);
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				   &clk_freq);
+	if (ret) {
+		dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
+		goto err;
+	}
+
+	i2c->speed = clk_freq / 1000;
+	if (i2c->speed == 0) {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
+		goto err;
+	}
+	jz4780_i2c_set_speed(i2c);
+
+	dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret)
+		goto err;
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int jz4780_i2c_remove(struct platform_device *pdev)
+{
+	struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+}
+
+static struct platform_driver jz4780_i2c_driver = {
+	.probe		= jz4780_i2c_probe,
+	.remove		= jz4780_i2c_remove,
+	.driver		= {
+		.name	= "jz4780-i2c",
+		.of_match_table = of_match_ptr(jz4780_i2c_of_matches),
+	},
+};
+
+module_platform_driver(jz4780_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>");
+MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-kempld.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-kempld.c
new file mode 100644
index 0000000..e879190
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-kempld.c
@@ -0,0 +1,409 @@
+/*
+ * I2C bus driver for Kontron COM modules
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * The driver is based on the i2c-ocores driver by Peter Korsgaard.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_I2C_PRELOW	0x0b
+#define KEMPLD_I2C_PREHIGH	0x0c
+#define KEMPLD_I2C_DATA		0x0e
+
+#define KEMPLD_I2C_CTRL		0x0d
+#define I2C_CTRL_IEN		0x40
+#define I2C_CTRL_EN		0x80
+
+#define KEMPLD_I2C_STAT		0x0f
+#define I2C_STAT_IF		0x01
+#define I2C_STAT_TIP		0x02
+#define I2C_STAT_ARBLOST	0x20
+#define I2C_STAT_BUSY		0x40
+#define I2C_STAT_NACK		0x80
+
+#define KEMPLD_I2C_CMD		0x0f
+#define I2C_CMD_START		0x91
+#define I2C_CMD_STOP		0x41
+#define I2C_CMD_READ		0x21
+#define I2C_CMD_WRITE		0x11
+#define I2C_CMD_READ_ACK	0x21
+#define I2C_CMD_READ_NACK	0x29
+#define I2C_CMD_IACK		0x01
+
+#define KEMPLD_I2C_FREQ_MAX	2700	/* 2.7 mHz */
+#define KEMPLD_I2C_FREQ_STD	100	/* 100 kHz */
+
+enum {
+	STATE_DONE = 0,
+	STATE_INIT,
+	STATE_ADDR,
+	STATE_ADDR10,
+	STATE_START,
+	STATE_WRITE,
+	STATE_READ,
+	STATE_ERROR,
+};
+
+struct kempld_i2c_data {
+	struct device			*dev;
+	struct kempld_device_data	*pld;
+	struct i2c_adapter		adap;
+	struct i2c_msg			*msg;
+	int				pos;
+	int				nmsgs;
+	int				state;
+	bool				was_active;
+};
+
+static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD;
+module_param(bus_frequency, uint, 0);
+MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default="
+				__MODULE_STRING(KEMPLD_I2C_FREQ_STD)")");
+
+static int i2c_bus = -1;
+module_param(i2c_bus, int, 0);
+MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)");
+
+static bool i2c_gpio_mux;
+module_param(i2c_gpio_mux, bool, 0);
+MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)");
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static int kempld_i2c_process(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	struct i2c_msg *msg = i2c->msg;
+	u8 addr;
+
+	/* Ready? */
+	if (stat & I2C_STAT_TIP)
+		return -EBUSY;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* Stop has been sent */
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+		if (i2c->state == STATE_ERROR)
+			return -EIO;
+		return 0;
+	}
+
+	/* Error? */
+	if (stat & I2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+		return -EAGAIN;
+	}
+
+	if (i2c->state == STATE_INIT) {
+		if (stat & I2C_STAT_BUSY)
+			return -EBUSY;
+
+		i2c->state = STATE_ADDR;
+	}
+
+	if (i2c->state == STATE_ADDR) {
+		/* 10 bit address? */
+		if (i2c->msg->flags & I2C_M_TEN) {
+			addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+			i2c->state = STATE_ADDR10;
+		} else {
+			addr = (i2c->msg->addr << 1);
+			i2c->state = STATE_START;
+		}
+
+		/* Set read bit if necessary */
+		addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
+
+		kempld_write8(pld, KEMPLD_I2C_DATA, addr);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
+
+		return 0;
+	}
+
+	/* Second part of 10 bit addressing */
+	if (i2c->state == STATE_ADDR10) {
+		kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+
+		i2c->state = STATE_START;
+		return 0;
+	}
+
+	if (i2c->state == STATE_START || i2c->state == STATE_WRITE) {
+		i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & I2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return -ENXIO;
+		}
+	} else {
+		msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA);
+	}
+
+	if (i2c->pos >= msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				i2c->state = STATE_ADDR;
+				return 0;
+			} else {
+				i2c->state = (msg->flags & I2C_M_RD)
+					? STATE_READ : STATE_WRITE;
+			}
+		} else {
+			i2c->state = STATE_DONE;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return 0;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ?
+			      I2C_CMD_READ_NACK : I2C_CMD_READ_ACK);
+	} else {
+		kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+	}
+
+	return 0;
+}
+
+static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct kempld_i2c_data *i2c = i2c_get_adapdata(adap);
+	struct kempld_device_data *pld = i2c->pld;
+	unsigned long timeout = jiffies + HZ;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_INIT;
+
+	/* Handle the transfer */
+	while (time_before(jiffies, timeout)) {
+		kempld_get_mutex(pld);
+		ret = kempld_i2c_process(i2c);
+		kempld_release_mutex(pld);
+
+		if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR)
+			return (i2c->state == STATE_DONE) ? num : ret;
+
+		if (ret == 0)
+			timeout = jiffies + HZ;
+
+		usleep_range(5, 15);
+	}
+
+	i2c->state = STATE_ERROR;
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static void kempld_i2c_device_init(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u16 prescale_corr;
+	long prescale;
+	u8 ctrl;
+	u8 stat;
+	u8 cfg;
+
+	/* Make sure the device is disabled */
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN);
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	if (bus_frequency > KEMPLD_I2C_FREQ_MAX)
+		bus_frequency = KEMPLD_I2C_FREQ_MAX;
+
+	if (pld->info.spec_major == 1)
+		prescale = pld->pld_clock / (bus_frequency * 5) - 1000;
+	else
+		prescale = pld->pld_clock / (bus_frequency * 4) - 3000;
+
+	if (prescale < 0)
+		prescale = 0;
+
+	/* Round to the best matching value */
+	prescale_corr = prescale / 1000;
+	if (prescale % 1000 >= 500)
+		prescale_corr++;
+
+	kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff);
+	kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8);
+
+	/* Activate I2C bus output on GPIO pins */
+	cfg = kempld_read8(pld, KEMPLD_CFG);
+	if (i2c_gpio_mux)
+		cfg |= KEMPLD_CFG_GPIO_I2C_MUX;
+	else
+		cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX;
+	kempld_write8(pld, KEMPLD_CFG, cfg);
+
+	/* Enable the device */
+	kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+	ctrl |= I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	if (stat & I2C_STAT_BUSY)
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+}
+
+static u32 kempld_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm kempld_i2c_algorithm = {
+	.master_xfer	= kempld_i2c_xfer,
+	.functionality	= kempld_i2c_func,
+};
+
+static const struct i2c_adapter kempld_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-kempld",
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &kempld_i2c_algorithm,
+};
+
+static int kempld_i2c_probe(struct platform_device *pdev)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent);
+	struct kempld_i2c_data *i2c;
+	int ret;
+	u8 ctrl;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->pld = pld;
+	i2c->dev = &pdev->dev;
+	i2c->adap = kempld_i2c_adapter;
+	i2c->adap.dev.parent = i2c->dev;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+
+	if (ctrl & I2C_CTRL_EN)
+		i2c->was_active = true;
+
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	/* Add I2C adapter to I2C tree */
+	if (i2c_bus >= -1)
+		i2c->adap.nr = i2c_bus;
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret)
+		return ret;
+
+	dev_info(i2c->dev, "I2C bus initialized at %dkHz\n",
+		 bus_frequency);
+
+	return 0;
+}
+
+static int kempld_i2c_remove(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	/*
+	 * Disable I2C logic if it was not activated before the
+	 * driver loaded
+	 */
+	if (!i2c->was_active) {
+		ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+		ctrl &= ~I2C_CTRL_EN;
+		kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	}
+	kempld_release_mutex(pld);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int kempld_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_i2c_resume(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+
+	kempld_get_mutex(pld);
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+#else
+#define kempld_i2c_suspend	NULL
+#define kempld_i2c_resume	NULL
+#endif
+
+static struct platform_driver kempld_i2c_driver = {
+	.driver = {
+		.name = "kempld-i2c",
+	},
+	.probe		= kempld_i2c_probe,
+	.remove		= kempld_i2c_remove,
+	.suspend	= kempld_i2c_suspend,
+	.resume		= kempld_i2c_resume,
+};
+
+module_platform_driver(kempld_i2c_driver);
+
+MODULE_DESCRIPTION("KEM PLD I2C Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kempld_i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-lpc2k.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-lpc2k.c
new file mode 100644
index 0000000..59167c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-lpc2k.c
@@ -0,0 +1,507 @@
+/*
+ * Copyright (C) 2011 NXP Semiconductors
+ *
+ * Code portions referenced from the i2x-pxa and i2c-pnx drivers
+ *
+ * Make SMBus byte and word transactions work on LPC178x/7x
+ * Copyright (c) 2012
+ * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
+ * Anton Protopopov, Emcraft Systems, antonp@emcraft.com
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+/* LPC24xx register offsets and bits */
+#define LPC24XX_I2CONSET	0x00
+#define LPC24XX_I2STAT		0x04
+#define LPC24XX_I2DAT		0x08
+#define LPC24XX_I2ADDR		0x0c
+#define LPC24XX_I2SCLH		0x10
+#define LPC24XX_I2SCLL		0x14
+#define LPC24XX_I2CONCLR	0x18
+
+#define LPC24XX_AA		BIT(2)
+#define LPC24XX_SI		BIT(3)
+#define LPC24XX_STO		BIT(4)
+#define LPC24XX_STA		BIT(5)
+#define LPC24XX_I2EN		BIT(6)
+
+#define LPC24XX_STO_AA		(LPC24XX_STO | LPC24XX_AA)
+#define LPC24XX_CLEAR_ALL	(LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \
+				 LPC24XX_STA | LPC24XX_I2EN)
+
+/* I2C SCL clock has different duty cycle depending on mode */
+#define I2C_STD_MODE_DUTY		46
+#define I2C_FAST_MODE_DUTY		36
+#define I2C_FAST_MODE_PLUS_DUTY		38
+
+/*
+ * 26 possible I2C status codes, but codes applicable only
+ * to master are listed here and used in this driver
+ */
+enum {
+	M_BUS_ERROR		= 0x00,
+	M_START			= 0x08,
+	M_REPSTART		= 0x10,
+	MX_ADDR_W_ACK		= 0x18,
+	MX_ADDR_W_NACK		= 0x20,
+	MX_DATA_W_ACK		= 0x28,
+	MX_DATA_W_NACK		= 0x30,
+	M_DATA_ARB_LOST		= 0x38,
+	MR_ADDR_R_ACK		= 0x40,
+	MR_ADDR_R_NACK		= 0x48,
+	MR_DATA_R_ACK		= 0x50,
+	MR_DATA_R_NACK		= 0x58,
+	M_I2C_IDLE		= 0xf8,
+};
+
+struct lpc2k_i2c {
+	void __iomem		*base;
+	struct clk		*clk;
+	int			irq;
+	wait_queue_head_t	wait;
+	struct i2c_adapter	adap;
+	struct i2c_msg		*msg;
+	int			msg_idx;
+	int			msg_status;
+	int			is_last;
+};
+
+static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
+{
+	/* Will force clear all statuses */
+	writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
+	writel(0, i2c->base + LPC24XX_I2ADDR);
+	writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
+}
+
+static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+	/*
+	 * If the transfer needs to abort for some reason, we'll try to
+	 * force a stop condition to clear any pending bus conditions
+	 */
+	writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);
+
+	/* Wait for status change */
+	while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
+		if (time_after(jiffies, timeout)) {
+			/* Bus was not idle, try to reset adapter */
+			i2c_lpc2k_reset(i2c);
+			return -EBUSY;
+		}
+
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
+{
+	unsigned char data;
+	u32 status;
+
+	/*
+	 * I2C in the LPC2xxx series is basically a state machine.
+	 * Just run through the steps based on the current status.
+	 */
+	status = readl(i2c->base + LPC24XX_I2STAT);
+
+	switch (status) {
+	case M_START:
+	case M_REPSTART:
+		/* Start bit was just sent out, send out addr and dir */
+		data = i2c_8bit_addr_from_msg(i2c->msg);
+
+		writel(data, i2c->base + LPC24XX_I2DAT);
+		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
+		break;
+
+	case MX_ADDR_W_ACK:
+	case MX_DATA_W_ACK:
+		/*
+		 * Address or data was sent out with an ACK. If there is more
+		 * data to send, send it now
+		 */
+		if (i2c->msg_idx < i2c->msg->len) {
+			writel(i2c->msg->buf[i2c->msg_idx],
+			       i2c->base + LPC24XX_I2DAT);
+		} else if (i2c->is_last) {
+			/* Last message, send stop */
+			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
+			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
+			i2c->msg_status = 0;
+			disable_irq_nosync(i2c->irq);
+		} else {
+			i2c->msg_status = 0;
+			disable_irq_nosync(i2c->irq);
+		}
+
+		i2c->msg_idx++;
+		break;
+
+	case MR_ADDR_R_ACK:
+		/* Receive first byte from slave */
+		if (i2c->msg->len == 1) {
+			/* Last byte, return NACK */
+			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
+		} else {
+			/* Not last byte, return ACK */
+			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
+		}
+
+		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
+		break;
+
+	case MR_DATA_R_NACK:
+		/*
+		 * The I2C shows NACK status on reads, so we need to accept
+		 * the NACK as an ACK here. This should be ok, as the real
+		 * BACK would of been caught on the address write.
+		 */
+	case MR_DATA_R_ACK:
+		/* Data was received */
+		if (i2c->msg_idx < i2c->msg->len) {
+			i2c->msg->buf[i2c->msg_idx] =
+					readl(i2c->base + LPC24XX_I2DAT);
+		}
+
+		/* If transfer is done, send STOP */
+		if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
+			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
+			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
+			i2c->msg_status = 0;
+		}
+
+		/* Message is done */
+		if (i2c->msg_idx >= i2c->msg->len - 1) {
+			i2c->msg_status = 0;
+			disable_irq_nosync(i2c->irq);
+		}
+
+		/*
+		 * One pre-last data input, send NACK to tell the slave that
+		 * this is going to be the last data byte to be transferred.
+		 */
+		if (i2c->msg_idx >= i2c->msg->len - 2) {
+			/* One byte left to receive - NACK */
+			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
+		} else {
+			/* More than one byte left to receive - ACK */
+			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
+		}
+
+		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
+		i2c->msg_idx++;
+		break;
+
+	case MX_ADDR_W_NACK:
+	case MX_DATA_W_NACK:
+	case MR_ADDR_R_NACK:
+		/* NACK processing is done */
+		writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
+		i2c->msg_status = -ENXIO;
+		disable_irq_nosync(i2c->irq);
+		break;
+
+	case M_DATA_ARB_LOST:
+		/* Arbitration lost */
+		i2c->msg_status = -EAGAIN;
+
+		/* Release the I2C bus */
+		writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
+		disable_irq_nosync(i2c->irq);
+		break;
+
+	default:
+		/* Unexpected statuses */
+		i2c->msg_status = -EIO;
+		disable_irq_nosync(i2c->irq);
+		break;
+	}
+
+	/* Exit on failure or all bytes transferred */
+	if (i2c->msg_status != -EBUSY)
+		wake_up(&i2c->wait);
+
+	/*
+	 * If `msg_status` is zero, then `lpc2k_process_msg()`
+	 * is responsible for clearing the SI flag.
+	 */
+	if (i2c->msg_status != 0)
+		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
+}
+
+static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
+{
+	/* A new transfer is kicked off by initiating a start condition */
+	if (!msgidx) {
+		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
+	} else {
+		/*
+		 * A multi-message I2C transfer continues where the
+		 * previous I2C transfer left off and uses the
+		 * current condition of the I2C adapter.
+		 */
+		if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
+			WARN_ON(i2c->msg->len == 0);
+
+			if (!(i2c->msg->flags & I2C_M_RD)) {
+				/* Start transmit of data */
+				writel(i2c->msg->buf[0],
+				       i2c->base + LPC24XX_I2DAT);
+				i2c->msg_idx++;
+			}
+		} else {
+			/* Start or repeated start */
+			writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
+		}
+
+		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
+	}
+
+	enable_irq(i2c->irq);
+
+	/* Wait for transfer completion */
+	if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
+			       msecs_to_jiffies(1000)) == 0) {
+		disable_irq_nosync(i2c->irq);
+
+		return -ETIMEDOUT;
+	}
+
+	return i2c->msg_status;
+}
+
+static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			  int msg_num)
+{
+	struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
+	int ret, i;
+	u32 stat;
+
+	/* Check for bus idle condition */
+	stat = readl(i2c->base + LPC24XX_I2STAT);
+	if (stat != M_I2C_IDLE) {
+		/* Something is holding the bus, try to clear it */
+		return i2c_lpc2k_clear_arb(i2c);
+	}
+
+	/* Process a single message at a time */
+	for (i = 0; i < msg_num; i++) {
+		/* Save message pointer and current message data index */
+		i2c->msg = &msgs[i];
+		i2c->msg_idx = 0;
+		i2c->msg_status = -EBUSY;
+		i2c->is_last = (i == (msg_num - 1));
+
+		ret = lpc2k_process_msg(i2c, i);
+		if (ret)
+			return ret;
+	}
+
+	return msg_num;
+}
+
+static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
+{
+	struct lpc2k_i2c *i2c = dev_id;
+
+	if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
+		i2c_lpc2k_pump_msg(i2c);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
+{
+	/* Only emulated SMBus for now */
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm i2c_lpc2k_algorithm = {
+	.master_xfer	= i2c_lpc2k_xfer,
+	.functionality	= i2c_lpc2k_functionality,
+};
+
+static int i2c_lpc2k_probe(struct platform_device *pdev)
+{
+	struct lpc2k_i2c *i2c;
+	struct resource *res;
+	u32 bus_clk_rate;
+	u32 scl_high;
+	u32 clkrate;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	if (i2c->irq < 0) {
+		dev_err(&pdev->dev, "can't get interrupt resource\n");
+		return i2c->irq;
+	}
+
+	init_waitqueue_head(&i2c->wait);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "error getting clock\n");
+		return PTR_ERR(i2c->clk);
+	}
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable clock.\n");
+		return ret;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can't request interrupt.\n");
+		goto fail_clk;
+	}
+
+	disable_irq_nosync(i2c->irq);
+
+	/* Place controller is a known state */
+	i2c_lpc2k_reset(i2c);
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				   &bus_clk_rate);
+	if (ret)
+		bus_clk_rate = 100000; /* 100 kHz default clock rate */
+
+	clkrate = clk_get_rate(i2c->clk);
+	if (clkrate == 0) {
+		dev_err(&pdev->dev, "can't get I2C base clock\n");
+		ret = -EINVAL;
+		goto fail_clk;
+	}
+
+	/* Setup I2C dividers to generate clock with proper duty cycle */
+	clkrate = clkrate / bus_clk_rate;
+	if (bus_clk_rate <= 100000)
+		scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
+	else if (bus_clk_rate <= 400000)
+		scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
+	else
+		scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
+
+	writel(scl_high, i2c->base + LPC24XX_I2SCLH);
+	writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);
+
+	platform_set_drvdata(pdev, i2c);
+
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.owner = THIS_MODULE;
+	strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
+	i2c->adap.algo = &i2c_lpc2k_algorithm;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0)
+		goto fail_clk;
+
+	dev_info(&pdev->dev, "LPC2K I2C adapter\n");
+
+	return 0;
+
+fail_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int i2c_lpc2k_remove(struct platform_device *dev)
+{
+	struct lpc2k_i2c *i2c = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_lpc2k_suspend(struct device *dev)
+{
+	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_disable(i2c->clk);
+
+	return 0;
+}
+
+static int i2c_lpc2k_resume(struct device *dev)
+{
+	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_enable(i2c->clk);
+	i2c_lpc2k_reset(i2c);
+
+	return 0;
+}
+
+static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
+	.suspend_noirq = i2c_lpc2k_suspend,
+	.resume_noirq = i2c_lpc2k_resume,
+};
+
+#define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops)
+#else
+#define I2C_LPC2K_DEV_PM_OPS NULL
+#endif
+
+static const struct of_device_id lpc2k_i2c_match[] = {
+	{ .compatible = "nxp,lpc1788-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);
+
+static struct platform_driver i2c_lpc2k_driver = {
+	.probe	= i2c_lpc2k_probe,
+	.remove	= i2c_lpc2k_remove,
+	.driver	= {
+		.name		= "lpc2k-i2c",
+		.pm		= I2C_LPC2K_DEV_PM_OPS,
+		.of_match_table	= lpc2k_i2c_match,
+	},
+};
+module_platform_driver(i2c_lpc2k_driver);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lpc2k-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-meson.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-meson.c
new file mode 100644
index 0000000..88d15b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-meson.c
@@ -0,0 +1,463 @@
+/*
+ * I2C bus driver for Amlogic Meson SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* Meson I2C register map */
+#define REG_CTRL		0x00
+#define REG_SLAVE_ADDR		0x04
+#define REG_TOK_LIST0		0x08
+#define REG_TOK_LIST1		0x0c
+#define REG_TOK_WDATA0		0x10
+#define REG_TOK_WDATA1		0x14
+#define REG_TOK_RDATA0		0x18
+#define REG_TOK_RDATA1		0x1c
+
+/* Control register fields */
+#define REG_CTRL_START		BIT(0)
+#define REG_CTRL_ACK_IGNORE	BIT(1)
+#define REG_CTRL_STATUS		BIT(2)
+#define REG_CTRL_ERROR		BIT(3)
+#define REG_CTRL_CLKDIV_SHIFT	12
+#define REG_CTRL_CLKDIV_MASK	GENMASK(21, 12)
+#define REG_CTRL_CLKDIVEXT_SHIFT 28
+#define REG_CTRL_CLKDIVEXT_MASK	GENMASK(29, 28)
+
+#define I2C_TIMEOUT_MS		500
+
+enum {
+	TOKEN_END = 0,
+	TOKEN_START,
+	TOKEN_SLAVE_ADDR_WRITE,
+	TOKEN_SLAVE_ADDR_READ,
+	TOKEN_DATA,
+	TOKEN_DATA_LAST,
+	TOKEN_STOP,
+};
+
+enum {
+	STATE_IDLE,
+	STATE_READ,
+	STATE_WRITE,
+};
+
+/**
+ * struct meson_i2c - Meson I2C device private data
+ *
+ * @adap:	I2C adapter instance
+ * @dev:	Pointer to device structure
+ * @regs:	Base address of the device memory mapped registers
+ * @clk:	Pointer to clock structure
+ * @irq:	IRQ number
+ * @msg:	Pointer to the current I2C message
+ * @state:	Current state in the driver state machine
+ * @last:	Flag set for the last message in the transfer
+ * @count:	Number of bytes to be sent/received in current transfer
+ * @pos:	Current position in the send/receive buffer
+ * @error:	Flag set when an error is received
+ * @lock:	To avoid race conditions between irq handler and xfer code
+ * @done:	Completion used to wait for transfer termination
+ * @tokens:	Sequence of tokens to be written to the device
+ * @num_tokens:	Number of tokens
+ */
+struct meson_i2c {
+	struct i2c_adapter	adap;
+	struct device		*dev;
+	void __iomem		*regs;
+	struct clk		*clk;
+
+	struct i2c_msg		*msg;
+	int			state;
+	bool			last;
+	int			count;
+	int			pos;
+	int			error;
+
+	spinlock_t		lock;
+	struct completion	done;
+	u32			tokens[2];
+	int			num_tokens;
+};
+
+static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
+			       u32 val)
+{
+	u32 data;
+
+	data = readl(i2c->regs + reg);
+	data &= ~mask;
+	data |= val & mask;
+	writel(data, i2c->regs + reg);
+}
+
+static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
+{
+	i2c->tokens[0] = 0;
+	i2c->tokens[1] = 0;
+	i2c->num_tokens = 0;
+}
+
+static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
+{
+	if (i2c->num_tokens < 8)
+		i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4);
+	else
+		i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4);
+
+	i2c->num_tokens++;
+}
+
+static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
+{
+	unsigned long clk_rate = clk_get_rate(i2c->clk);
+	unsigned int div;
+
+	div = DIV_ROUND_UP(clk_rate, freq * 4);
+
+	/* clock divider has 12 bits */
+	if (div >= (1 << 12)) {
+		dev_err(i2c->dev, "requested bus frequency too low\n");
+		div = (1 << 12) - 1;
+	}
+
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
+			   (div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT);
+
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
+			   (div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
+
+	dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
+		clk_rate, freq, div);
+}
+
+static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
+{
+	u32 rdata0, rdata1;
+	int i;
+
+	rdata0 = readl(i2c->regs + REG_TOK_RDATA0);
+	rdata1 = readl(i2c->regs + REG_TOK_RDATA1);
+
+	dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
+		rdata0, rdata1, len);
+
+	for (i = 0; i < min(4, len); i++)
+		*buf++ = (rdata0 >> i * 8) & 0xff;
+
+	for (i = 4; i < min(8, len); i++)
+		*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
+}
+
+static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len)
+{
+	u32 wdata0 = 0, wdata1 = 0;
+	int i;
+
+	for (i = 0; i < min(4, len); i++)
+		wdata0 |= *buf++ << (i * 8);
+
+	for (i = 4; i < min(8, len); i++)
+		wdata1 |= *buf++ << ((i - 4) * 8);
+
+	writel(wdata0, i2c->regs + REG_TOK_WDATA0);
+	writel(wdata1, i2c->regs + REG_TOK_WDATA1);
+
+	dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
+		wdata0, wdata1, len);
+}
+
+static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
+{
+	bool write = !(i2c->msg->flags & I2C_M_RD);
+	int i;
+
+	i2c->count = min(i2c->msg->len - i2c->pos, 8);
+
+	for (i = 0; i < i2c->count - 1; i++)
+		meson_i2c_add_token(i2c, TOKEN_DATA);
+
+	if (i2c->count) {
+		if (write || i2c->pos + i2c->count < i2c->msg->len)
+			meson_i2c_add_token(i2c, TOKEN_DATA);
+		else
+			meson_i2c_add_token(i2c, TOKEN_DATA_LAST);
+	}
+
+	if (write)
+		meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
+
+	if (i2c->last && i2c->pos + i2c->count >= i2c->msg->len)
+		meson_i2c_add_token(i2c, TOKEN_STOP);
+
+	writel(i2c->tokens[0], i2c->regs + REG_TOK_LIST0);
+	writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
+}
+
+static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
+{
+	struct meson_i2c *i2c = dev_id;
+	unsigned int ctrl;
+
+	spin_lock(&i2c->lock);
+
+	meson_i2c_reset_tokens(i2c);
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
+	ctrl = readl(i2c->regs + REG_CTRL);
+
+	dev_dbg(i2c->dev, "irq: state %d, pos %d, count %d, ctrl %08x\n",
+		i2c->state, i2c->pos, i2c->count, ctrl);
+
+	if (i2c->state == STATE_IDLE) {
+		spin_unlock(&i2c->lock);
+		return IRQ_NONE;
+	}
+
+	if (ctrl & REG_CTRL_ERROR) {
+		/*
+		 * The bit is set when the IGNORE_NAK bit is cleared
+		 * and the device didn't respond. In this case, the
+		 * I2C controller automatically generates a STOP
+		 * condition.
+		 */
+		dev_dbg(i2c->dev, "error bit set\n");
+		i2c->error = -ENXIO;
+		i2c->state = STATE_IDLE;
+		complete(&i2c->done);
+		goto out;
+	}
+
+	if (i2c->state == STATE_READ && i2c->count)
+		meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
+
+	i2c->pos += i2c->count;
+
+	if (i2c->pos >= i2c->msg->len) {
+		i2c->state = STATE_IDLE;
+		complete(&i2c->done);
+		goto out;
+	}
+
+	/* Restart the processing */
+	meson_i2c_prepare_xfer(i2c);
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
+out:
+	spin_unlock(&i2c->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
+{
+	int token;
+
+	token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ :
+		TOKEN_SLAVE_ADDR_WRITE;
+
+	writel(msg->addr << 1, i2c->regs + REG_SLAVE_ADDR);
+	meson_i2c_add_token(i2c, TOKEN_START);
+	meson_i2c_add_token(i2c, token);
+}
+
+static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
+			      int last)
+{
+	unsigned long time_left, flags;
+	int ret = 0;
+
+	i2c->msg = msg;
+	i2c->last = last;
+	i2c->pos = 0;
+	i2c->count = 0;
+	i2c->error = 0;
+
+	meson_i2c_reset_tokens(i2c);
+
+	flags = (msg->flags & I2C_M_IGNORE_NAK) ? REG_CTRL_ACK_IGNORE : 0;
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_ACK_IGNORE, flags);
+
+	if (!(msg->flags & I2C_M_NOSTART))
+		meson_i2c_do_start(i2c, msg);
+
+	i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+	meson_i2c_prepare_xfer(i2c);
+	reinit_completion(&i2c->done);
+
+	/* Start the transfer */
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
+
+	time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
+	time_left = wait_for_completion_timeout(&i2c->done, time_left);
+
+	/*
+	 * Protect access to i2c struct and registers from interrupt
+	 * handlers triggered by a transfer terminated after the
+	 * timeout period
+	 */
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	/* Abort any active operation */
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
+
+	if (!time_left) {
+		i2c->state = STATE_IDLE;
+		ret = -ETIMEDOUT;
+	}
+
+	if (i2c->error)
+		ret = i2c->error;
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	return ret;
+}
+
+static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			  int num)
+{
+	struct meson_i2c *i2c = adap->algo_data;
+	int i, ret = 0;
+
+	clk_enable(i2c->clk);
+
+	for (i = 0; i < num; i++) {
+		ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1);
+		if (ret)
+			break;
+	}
+
+	clk_disable(i2c->clk);
+
+	return ret ?: i;
+}
+
+static u32 meson_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm meson_i2c_algorithm = {
+	.master_xfer	= meson_i2c_xfer,
+	.functionality	= meson_i2c_func,
+};
+
+static int meson_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct meson_i2c *i2c;
+	struct resource *mem;
+	struct i2c_timings timings;
+	int irq, ret = 0;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct meson_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c_parse_fw_timings(&pdev->dev, &timings, true);
+
+	i2c->dev = &pdev->dev;
+	platform_set_drvdata(pdev, i2c);
+
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->done);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "can't get device clock\n");
+		return PTR_ERR(i2c->clk);
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "can't find IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, meson_i2c_irq, 0, NULL, i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can't request IRQ\n");
+		return ret;
+	}
+
+	ret = clk_prepare(i2c->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can't prepare clock\n");
+		return ret;
+	}
+
+	strlcpy(i2c->adap.name, "Meson I2C adapter",
+		sizeof(i2c->adap.name));
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &meson_i2c_algorithm;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+
+	/*
+	 * A transfer is triggered when START bit changes from 0 to 1.
+	 * Ensure that the bit is set to 0 after probe
+	 */
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		clk_unprepare(i2c->clk);
+		return ret;
+	}
+
+	meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
+
+	return 0;
+}
+
+static int meson_i2c_remove(struct platform_device *pdev)
+{
+	struct meson_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static const struct of_device_id meson_i2c_match[] = {
+	{ .compatible = "amlogic,meson6-i2c" },
+	{ .compatible = "amlogic,meson-gxbb-i2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, meson_i2c_match);
+
+static struct platform_driver meson_i2c_driver = {
+	.probe   = meson_i2c_probe,
+	.remove  = meson_i2c_remove,
+	.driver  = {
+		.name  = "meson-i2c",
+		.of_match_table = meson_i2c_match,
+	},
+};
+
+module_platform_driver(meson_i2c_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson I2C Bus driver");
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mlxcpld.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mlxcpld.c
new file mode 100644
index 0000000..4c28fa2
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mlxcpld.c
@@ -0,0 +1,504 @@
+/*
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* General defines */
+#define MLXPLAT_CPLD_LPC_I2C_BASE_ADDR	0x2000
+#define MLXCPLD_I2C_DEVICE_NAME		"i2c_mlxcpld"
+#define MLXCPLD_I2C_VALID_FLAG		(I2C_M_RECV_LEN | I2C_M_RD)
+#define MLXCPLD_I2C_BUS_NUM		1
+#define MLXCPLD_I2C_DATA_REG_SZ		36
+#define MLXCPLD_I2C_MAX_ADDR_LEN	4
+#define MLXCPLD_I2C_RETR_NUM		2
+#define MLXCPLD_I2C_XFER_TO		500000 /* usec */
+#define MLXCPLD_I2C_POLL_TIME		2000   /* usec */
+
+/* LPC I2C registers */
+#define MLXCPLD_LPCI2C_LPF_REG		0x0
+#define MLXCPLD_LPCI2C_CTRL_REG		0x1
+#define MLXCPLD_LPCI2C_HALF_CYC_REG	0x4
+#define MLXCPLD_LPCI2C_I2C_HOLD_REG	0x5
+#define MLXCPLD_LPCI2C_CMD_REG		0x6
+#define MLXCPLD_LPCI2C_NUM_DAT_REG	0x7
+#define MLXCPLD_LPCI2C_NUM_ADDR_REG	0x8
+#define MLXCPLD_LPCI2C_STATUS_REG	0x9
+#define MLXCPLD_LPCI2C_DATA_REG		0xa
+
+/* LPC I2C masks and parametres */
+#define MLXCPLD_LPCI2C_RST_SEL_MASK	0x1
+#define MLXCPLD_LPCI2C_TRANS_END	0x1
+#define MLXCPLD_LPCI2C_STATUS_NACK	0x10
+#define MLXCPLD_LPCI2C_NO_IND		0
+#define MLXCPLD_LPCI2C_ACK_IND		1
+#define MLXCPLD_LPCI2C_NACK_IND		2
+
+struct  mlxcpld_i2c_curr_xfer {
+	u8 cmd;
+	u8 addr_width;
+	u8 data_len;
+	u8 msg_num;
+	struct i2c_msg *msg;
+};
+
+struct mlxcpld_i2c_priv {
+	struct i2c_adapter adap;
+	u32 base_addr;
+	struct mutex lock;
+	struct  mlxcpld_i2c_curr_xfer xfer;
+	struct device *dev;
+};
+
+static void mlxcpld_i2c_lpc_write_buf(u8 *data, u8 len, u32 addr)
+{
+	int i;
+
+	for (i = 0; i < len - len % 4; i += 4)
+		outl(*(u32 *)(data + i), addr + i);
+	for (; i < len; ++i)
+		outb(*(data + i), addr + i);
+}
+
+static void mlxcpld_i2c_lpc_read_buf(u8 *data, u8 len, u32 addr)
+{
+	int i;
+
+	for (i = 0; i < len - len % 4; i += 4)
+		*(u32 *)(data + i) = inl(addr + i);
+	for (; i < len; ++i)
+		*(data + i) = inb(addr + i);
+}
+
+static void mlxcpld_i2c_read_comm(struct mlxcpld_i2c_priv *priv, u8 offs,
+				  u8 *data, u8 datalen)
+{
+	u32 addr = priv->base_addr + offs;
+
+	switch (datalen) {
+	case 1:
+		*(data) = inb(addr);
+		break;
+	case 2:
+		*((u16 *)data) = inw(addr);
+		break;
+	case 3:
+		*((u16 *)data) = inw(addr);
+		*(data + 2) = inb(addr + 2);
+		break;
+	case 4:
+		*((u32 *)data) = inl(addr);
+		break;
+	default:
+		mlxcpld_i2c_lpc_read_buf(data, datalen, addr);
+		break;
+	}
+}
+
+static void mlxcpld_i2c_write_comm(struct mlxcpld_i2c_priv *priv, u8 offs,
+				   u8 *data, u8 datalen)
+{
+	u32 addr = priv->base_addr + offs;
+
+	switch (datalen) {
+	case 1:
+		outb(*(data), addr);
+		break;
+	case 2:
+		outw(*((u16 *)data), addr);
+		break;
+	case 3:
+		outw(*((u16 *)data), addr);
+		outb(*(data + 2), addr + 2);
+		break;
+	case 4:
+		outl(*((u32 *)data), addr);
+		break;
+	default:
+		mlxcpld_i2c_lpc_write_buf(data, datalen, addr);
+		break;
+	}
+}
+
+/*
+ * Check validity of received i2c messages parameters.
+ * Returns 0 if OK, other - in case of invalid parameters.
+ */
+static int mlxcpld_i2c_check_msg_params(struct mlxcpld_i2c_priv *priv,
+					struct i2c_msg *msgs, int num)
+{
+	int i;
+
+	if (!num) {
+		dev_err(priv->dev, "Incorrect 0 num of messages\n");
+		return -EINVAL;
+	}
+
+	if (unlikely(msgs[0].addr > 0x7f)) {
+		dev_err(priv->dev, "Invalid address 0x%03x\n",
+			msgs[0].addr);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num; ++i) {
+		if (unlikely(!msgs[i].buf)) {
+			dev_err(priv->dev, "Invalid buf in msg[%d]\n",
+				i);
+			return -EINVAL;
+		}
+		if (unlikely(msgs[0].addr != msgs[i].addr)) {
+			dev_err(priv->dev, "Invalid addr in msg[%d]\n",
+				i);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Check if transfer is completed and status of operation.
+ * Returns 0 - transfer completed (both ACK or NACK),
+ * negative - transfer isn't finished.
+ */
+static int mlxcpld_i2c_check_status(struct mlxcpld_i2c_priv *priv, int *status)
+{
+	u8 val;
+
+	mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_STATUS_REG, &val, 1);
+
+	if (val & MLXCPLD_LPCI2C_TRANS_END) {
+		if (val & MLXCPLD_LPCI2C_STATUS_NACK)
+			/*
+			 * The slave is unable to accept the data. No such
+			 * slave, command not understood, or unable to accept
+			 * any more data.
+			 */
+			*status = MLXCPLD_LPCI2C_NACK_IND;
+		else
+			*status = MLXCPLD_LPCI2C_ACK_IND;
+		return 0;
+	}
+	*status = MLXCPLD_LPCI2C_NO_IND;
+
+	return -EIO;
+}
+
+static void mlxcpld_i2c_set_transf_data(struct mlxcpld_i2c_priv *priv,
+					struct i2c_msg *msgs, int num,
+					u8 comm_len)
+{
+	priv->xfer.msg = msgs;
+	priv->xfer.msg_num = num;
+
+	/*
+	 * All upper layers currently are never use transfer with more than
+	 * 2 messages. Actually, it's also not so relevant in Mellanox systems
+	 * because of HW limitation. Max size of transfer is not more than 32
+	 * bytes in the current x86 LPCI2C bridge.
+	 */
+	priv->xfer.cmd = msgs[num - 1].flags & I2C_M_RD;
+
+	if (priv->xfer.cmd == I2C_M_RD && comm_len != msgs[0].len) {
+		priv->xfer.addr_width = msgs[0].len;
+		priv->xfer.data_len = comm_len - priv->xfer.addr_width;
+	} else {
+		priv->xfer.addr_width = 0;
+		priv->xfer.data_len = comm_len;
+	}
+}
+
+/* Reset CPLD LPCI2C block */
+static void mlxcpld_i2c_reset(struct mlxcpld_i2c_priv *priv)
+{
+	u8 val;
+
+	mutex_lock(&priv->lock);
+
+	mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_CTRL_REG, &val, 1);
+	val &= ~MLXCPLD_LPCI2C_RST_SEL_MASK;
+	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_CTRL_REG, &val, 1);
+
+	mutex_unlock(&priv->lock);
+}
+
+/* Make sure the CPLD is ready to start transmitting. */
+static int mlxcpld_i2c_check_busy(struct mlxcpld_i2c_priv *priv)
+{
+	u8 val;
+
+	mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_STATUS_REG, &val, 1);
+
+	if (val & MLXCPLD_LPCI2C_TRANS_END)
+		return 0;
+
+	return -EIO;
+}
+
+static int mlxcpld_i2c_wait_for_free(struct mlxcpld_i2c_priv *priv)
+{
+	int timeout = 0;
+
+	do {
+		if (!mlxcpld_i2c_check_busy(priv))
+			break;
+		usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
+		timeout += MLXCPLD_I2C_POLL_TIME;
+	} while (timeout <= MLXCPLD_I2C_XFER_TO);
+
+	if (timeout > MLXCPLD_I2C_XFER_TO)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/*
+ * Wait for master transfer to complete.
+ * It puts current process to sleep until we get interrupt or timeout expires.
+ * Returns the number of transferred or read bytes or error (<0).
+ */
+static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
+{
+	int status, i, timeout = 0;
+	u8 datalen;
+
+	do {
+		usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
+		if (!mlxcpld_i2c_check_status(priv, &status))
+			break;
+		timeout += MLXCPLD_I2C_POLL_TIME;
+	} while (status == 0 && timeout < MLXCPLD_I2C_XFER_TO);
+
+	switch (status) {
+	case MLXCPLD_LPCI2C_NO_IND:
+		return -ETIMEDOUT;
+
+	case MLXCPLD_LPCI2C_ACK_IND:
+		if (priv->xfer.cmd != I2C_M_RD)
+			return (priv->xfer.addr_width + priv->xfer.data_len);
+
+		if (priv->xfer.msg_num == 1)
+			i = 0;
+		else
+			i = 1;
+
+		if (!priv->xfer.msg[i].buf)
+			return -EINVAL;
+
+		/*
+		 * Actual read data len will be always the same as
+		 * requested len. 0xff (line pull-up) will be returned
+		 * if slave has no data to return. Thus don't read
+		 * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD.
+		 */
+		datalen = priv->xfer.data_len;
+
+		mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_DATA_REG,
+				      priv->xfer.msg[i].buf, datalen);
+
+		return datalen;
+
+	case MLXCPLD_LPCI2C_NACK_IND:
+		return -ENXIO;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static void mlxcpld_i2c_xfer_msg(struct mlxcpld_i2c_priv *priv)
+{
+	int i, len = 0;
+	u8 cmd;
+
+	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
+			       &priv->xfer.data_len, 1);
+	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG,
+			       &priv->xfer.addr_width, 1);
+
+	for (i = 0; i < priv->xfer.msg_num; i++) {
+		if ((priv->xfer.msg[i].flags & I2C_M_RD) != I2C_M_RD) {
+			/* Don't write to CPLD buffer in read transaction */
+			mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_DATA_REG +
+					       len, priv->xfer.msg[i].buf,
+					       priv->xfer.msg[i].len);
+			len += priv->xfer.msg[i].len;
+		}
+	}
+
+	/*
+	 * Set target slave address with command for master transfer.
+	 * It should be latest executed function before CPLD transaction.
+	 */
+	cmd = (priv->xfer.msg[0].addr << 1) | priv->xfer.cmd;
+	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_CMD_REG, &cmd, 1);
+}
+
+/*
+ * Generic lpc-i2c transfer.
+ * Returns the number of processed messages or error (<0).
+ */
+static int mlxcpld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			    int num)
+{
+	struct mlxcpld_i2c_priv *priv = i2c_get_adapdata(adap);
+	u8 comm_len = 0;
+	int i, err;
+
+	err = mlxcpld_i2c_check_msg_params(priv, msgs, num);
+	if (err) {
+		dev_err(priv->dev, "Incorrect message\n");
+		return err;
+	}
+
+	for (i = 0; i < num; ++i)
+		comm_len += msgs[i].len;
+
+	/* Check bus state */
+	if (mlxcpld_i2c_wait_for_free(priv)) {
+		dev_err(priv->dev, "LPCI2C bridge is busy\n");
+
+		/*
+		 * Usually it means something serious has happened.
+		 * We can not have unfinished previous transfer
+		 * so it doesn't make any sense to try to stop it.
+		 * Probably we were not able to recover from the
+		 * previous error.
+		 * The only reasonable thing - is soft reset.
+		 */
+		mlxcpld_i2c_reset(priv);
+		if (mlxcpld_i2c_check_busy(priv)) {
+			dev_err(priv->dev, "LPCI2C bridge is busy after reset\n");
+			return -EIO;
+		}
+	}
+
+	mlxcpld_i2c_set_transf_data(priv, msgs, num, comm_len);
+
+	mutex_lock(&priv->lock);
+
+	/* Do real transfer. Can't fail */
+	mlxcpld_i2c_xfer_msg(priv);
+
+	/* Wait for transaction complete */
+	err = mlxcpld_i2c_wait_for_tc(priv);
+
+	mutex_unlock(&priv->lock);
+
+	return err < 0 ? err : num;
+}
+
+static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm mlxcpld_i2c_algo = {
+	.master_xfer	= mlxcpld_i2c_xfer,
+	.functionality	= mlxcpld_i2c_func
+};
+
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_read_len = MLXCPLD_I2C_DATA_REG_SZ - MLXCPLD_I2C_MAX_ADDR_LEN,
+	.max_write_len = MLXCPLD_I2C_DATA_REG_SZ,
+	.max_comb_1st_msg_len = 4,
+};
+
+static struct i2c_adapter mlxcpld_i2c_adapter = {
+	.owner          = THIS_MODULE,
+	.name           = "i2c-mlxcpld",
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo           = &mlxcpld_i2c_algo,
+	.quirks		= &mlxcpld_i2c_quirks,
+	.retries	= MLXCPLD_I2C_RETR_NUM,
+	.nr		= MLXCPLD_I2C_BUS_NUM,
+};
+
+static int mlxcpld_i2c_probe(struct platform_device *pdev)
+{
+	struct mlxcpld_i2c_priv *priv;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+	platform_set_drvdata(pdev, priv);
+
+	priv->dev = &pdev->dev;
+
+	/* Register with i2c layer */
+	mlxcpld_i2c_adapter.timeout = usecs_to_jiffies(MLXCPLD_I2C_XFER_TO);
+	priv->adap = mlxcpld_i2c_adapter;
+	priv->adap.dev.parent = &pdev->dev;
+	priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
+	i2c_set_adapdata(&priv->adap, priv);
+
+	err = i2c_add_numbered_adapter(&priv->adap);
+	if (err)
+		mutex_destroy(&priv->lock);
+
+	return err;
+}
+
+static int mlxcpld_i2c_remove(struct platform_device *pdev)
+{
+	struct mlxcpld_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	mutex_destroy(&priv->lock);
+
+	return 0;
+}
+
+static struct platform_driver mlxcpld_i2c_driver = {
+	.probe		= mlxcpld_i2c_probe,
+	.remove		= mlxcpld_i2c_remove,
+	.driver = {
+		.name = MLXCPLD_I2C_DEVICE_NAME,
+	},
+};
+
+module_platform_driver(mlxcpld_i2c_driver);
+
+MODULE_AUTHOR("Michael Shych <michaels@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox I2C-CPLD controller driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:i2c-mlxcpld");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c
new file mode 100644
index 0000000..96caf37
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mpc.c
@@ -0,0 +1,854 @@
+/*
+ * (C) Copyright 2003-2004
+ * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
+
+ * This is a combined i2c adapter and algorithm driver for the
+ * MPC107/Tsi107 PowerPC northbridge and processors that include
+ * the same I2C unit (8240, 8245, 85xx).
+ *
+ * Release 0.8
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched/signal.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc85xx.h>
+#include <sysdev/fsl_soc.h>
+
+#define DRV_NAME "mpc-i2c"
+
+#define MPC_I2C_CLOCK_LEGACY   0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
+#define MPC_I2C_FDR   0x04
+#define MPC_I2C_CR    0x08
+#define MPC_I2C_SR    0x0c
+#define MPC_I2C_DR    0x10
+#define MPC_I2C_DFSRR 0x14
+
+#define CCR_MEN  0x80
+#define CCR_MIEN 0x40
+#define CCR_MSTA 0x20
+#define CCR_MTX  0x10
+#define CCR_TXAK 0x08
+#define CCR_RSTA 0x04
+
+#define CSR_MCF  0x80
+#define CSR_MAAS 0x40
+#define CSR_MBB  0x20
+#define CSR_MAL  0x10
+#define CSR_SRW  0x04
+#define CSR_MIF  0x02
+#define CSR_RXAK 0x01
+
+struct mpc_i2c {
+	struct device *dev;
+	void __iomem *base;
+	u32 interrupt;
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	int irq;
+	u32 real_clk;
+#ifdef CONFIG_PM_SLEEP
+	u8 fdr, dfsrr;
+#endif
+	struct clk *clk_per;
+};
+
+struct mpc_i2c_divider {
+	u16 divider;
+	u16 fdr;	/* including dfsrr */
+};
+
+struct mpc_i2c_data {
+	void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+		      u32 clock, u32 prescaler);
+	u32 prescaler;
+};
+
+static inline void writeccr(struct mpc_i2c *i2c, u32 x)
+{
+	writeb(x, i2c->base + MPC_I2C_CR);
+}
+
+static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
+{
+	struct mpc_i2c *i2c = dev_id;
+	if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
+		/* Read again to allow register to stabilise */
+		i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
+		writeb(0, i2c->base + MPC_I2C_SR);
+		wake_up(&i2c->queue);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
+ * the bus, because it wants to send ACK.
+ * Following sequence of enabling/disabling and sending start/stop generates
+ * the 9 pulses, so it's all OK.
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+	int k;
+	u32 delay_val = 1000000 / i2c->real_clk + 1;
+
+	if (delay_val < 2)
+		delay_val = 2;
+
+	for (k = 9; k; k--) {
+		writeccr(i2c, 0);
+		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		readb(i2c->base + MPC_I2C_DR);
+		writeccr(i2c, CCR_MEN);
+		udelay(delay_val << 1);
+	}
+}
+
+static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
+{
+	unsigned long orig_jiffies = jiffies;
+	u32 cmd_err;
+	int result = 0;
+
+	if (!i2c->irq) {
+		while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
+			schedule();
+			if (time_after(jiffies, orig_jiffies + timeout)) {
+				dev_dbg(i2c->dev, "timeout\n");
+				writeccr(i2c, 0);
+				result = -ETIMEDOUT;
+				break;
+			}
+		}
+		cmd_err = readb(i2c->base + MPC_I2C_SR);
+		writeb(0, i2c->base + MPC_I2C_SR);
+	} else {
+		/* Interrupt mode */
+		result = wait_event_timeout(i2c->queue,
+			(i2c->interrupt & CSR_MIF), timeout);
+
+		if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+			dev_dbg(i2c->dev, "wait timeout\n");
+			writeccr(i2c, 0);
+			result = -ETIMEDOUT;
+		}
+
+		cmd_err = i2c->interrupt;
+		i2c->interrupt = 0;
+	}
+
+	if (result < 0)
+		return result;
+
+	if (!(cmd_err & CSR_MCF)) {
+		dev_dbg(i2c->dev, "unfinished\n");
+		return -EIO;
+	}
+
+	if (cmd_err & CSR_MAL) {
+		dev_dbg(i2c->dev, "MAL\n");
+		return -EAGAIN;
+	}
+
+	if (writing && (cmd_err & CSR_RXAK)) {
+		dev_dbg(i2c->dev, "No RXAK\n");
+		/* generate stop */
+		writeccr(i2c, CCR_MEN);
+		return -ENXIO;
+	}
+	return 0;
+}
+
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
+	{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
+	{36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
+	{52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
+	{68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
+	{96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
+	{128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
+	{176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
+	{240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
+	{320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
+	{448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
+	{640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
+	{1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
+	{1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
+	{2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
+	{4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
+	{7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
+	{10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
+};
+
+static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+					  int prescaler, u32 *real_clk)
+{
+	const struct mpc_i2c_divider *div = NULL;
+	unsigned int pvr = mfspr(SPRN_PVR);
+	u32 divider;
+	int i;
+
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x3f -> div = 2048 */
+		*real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
+		return -EINVAL;
+	}
+
+	/* Determine divider value */
+	divider = mpc5xxx_get_bus_frequency(node) / clock;
+
+	/*
+	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
+	 * is equal to or lower than the requested speed.
+	 */
+	for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
+		div = &mpc_i2c_dividers_52xx[i];
+		/* Old MPC5200 rev A CPUs do not support the high bits */
+		if (div->fdr & 0xc0 && pvr == 0x80822011)
+			continue;
+		if (div->divider >= divider)
+			break;
+	}
+
+	*real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+	return (int)div->fdr;
+}
+
+static void mpc_i2c_setup_52xx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+	int ret, fdr;
+
+	if (clock == MPC_I2C_CLOCK_PRESERVE) {
+		dev_dbg(i2c->dev, "using fdr %d\n",
+			readb(i2c->base + MPC_I2C_FDR));
+		return;
+	}
+
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
+	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
+
+	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
+			 fdr);
+}
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void mpc_i2c_setup_52xx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void mpc_i2c_setup_512x(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+	struct device_node *node_ctrl;
+	void __iomem *ctrl;
+	const u32 *pval;
+	u32 idx;
+
+	/* Enable I2C interrupts for mpc5121 */
+	node_ctrl = of_find_compatible_node(NULL, NULL,
+					    "fsl,mpc5121-i2c-ctrl");
+	if (node_ctrl) {
+		ctrl = of_iomap(node_ctrl, 0);
+		if (ctrl) {
+			/* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+			pval = of_get_property(node, "reg", NULL);
+			idx = (*pval & 0xff) / 0x20;
+			setbits32(ctrl, 1 << (24 + idx * 2));
+			iounmap(ctrl);
+		}
+		of_node_put(node_ctrl);
+	}
+
+	/* The clock setup for the 52xx works also fine for the 512x */
+	mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void mpc_i2c_setup_512x(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_FSL_SOC
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+	{160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
+	{288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
+	{416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
+	{544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
+	{672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
+	{800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
+	{1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
+	{1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
+	{1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
+	{2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
+	{3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
+	{4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
+	{7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
+	{12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
+	{18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
+	{30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
+	{49152, 0x011e}, {61440, 0x011f}
+};
+
+static u32 mpc_i2c_get_sec_cfg_8xxx(void)
+{
+	struct device_node *node = NULL;
+	u32 __iomem *reg;
+	u32 val = 0;
+
+	node = of_find_node_by_name(NULL, "global-utilities");
+	if (node) {
+		const u32 *prop = of_get_property(node, "reg", NULL);
+		if (prop) {
+			/*
+			 * Map and check POR Device Status Register 2
+			 * (PORDEVSR2) at 0xE0014
+			 */
+			reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
+			if (!reg)
+				printk(KERN_ERR
+				       "Error: couldn't map PORDEVSR2\n");
+			else
+				val = in_be32(reg) & 0x00000080; /* sec-cfg */
+			iounmap(reg);
+		}
+	}
+	of_node_put(node);
+
+	return val;
+}
+
+static u32 mpc_i2c_get_prescaler_8xxx(void)
+{
+	/* mpc83xx and mpc82xx all have prescaler 1 */
+	u32 prescaler = 1;
+
+	/* mpc85xx */
+	if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
+		|| pvr_version_is(PVR_VER_E500MC)
+		|| pvr_version_is(PVR_VER_E5500)
+		|| pvr_version_is(PVR_VER_E6500)) {
+		unsigned int svr = mfspr(SPRN_SVR);
+
+		if ((SVR_SOC_VER(svr) == SVR_8540)
+			|| (SVR_SOC_VER(svr) == SVR_8541)
+			|| (SVR_SOC_VER(svr) == SVR_8560)
+			|| (SVR_SOC_VER(svr) == SVR_8555)
+			|| (SVR_SOC_VER(svr) == SVR_8610))
+			/* the above 85xx SoCs have prescaler 1 */
+			prescaler = 1;
+		else
+			/* all the other 85xx have prescaler 2 */
+			prescaler = 2;
+	}
+
+	return prescaler;
+}
+
+static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+					  u32 prescaler, u32 *real_clk)
+{
+	const struct mpc_i2c_divider *div = NULL;
+	u32 divider;
+	int i;
+
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x1031 -> div = 16 * 3072 */
+		*real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
+		return -EINVAL;
+	}
+
+	/* Determine proper divider value */
+	if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
+		prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
+	if (!prescaler)
+		prescaler = mpc_i2c_get_prescaler_8xxx();
+
+	divider = fsl_get_sys_freq() / clock / prescaler;
+
+	pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
+		 fsl_get_sys_freq(), clock, divider);
+
+	/*
+	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
+	 * is equal to or lower than the requested speed.
+	 */
+	for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
+		div = &mpc_i2c_dividers_8xxx[i];
+		if (div->divider >= divider)
+			break;
+	}
+
+	*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
+	return div ? (int)div->fdr : -EINVAL;
+}
+
+static void mpc_i2c_setup_8xxx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+	int ret, fdr;
+
+	if (clock == MPC_I2C_CLOCK_PRESERVE) {
+		dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+			readb(i2c->base + MPC_I2C_DFSRR),
+			readb(i2c->base + MPC_I2C_FDR));
+		return;
+	}
+
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
+	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
+
+	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
+	writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+			 i2c->real_clk, fdr >> 8, fdr & 0xff);
+}
+
+#else /* !CONFIG_FSL_SOC */
+static void mpc_i2c_setup_8xxx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_FSL_SOC */
+
+static void mpc_i2c_start(struct mpc_i2c *i2c)
+{
+	/* Clear arbitration */
+	writeb(0, i2c->base + MPC_I2C_SR);
+	/* Start with MEN */
+	writeccr(i2c, CCR_MEN);
+}
+
+static void mpc_i2c_stop(struct mpc_i2c *i2c)
+{
+	writeccr(i2c, CCR_MEN);
+}
+
+static int mpc_write(struct mpc_i2c *i2c, int target,
+		     const u8 *data, int length, int restart)
+{
+	int i, result;
+	unsigned timeout = i2c->adap.timeout;
+	u32 flags = restart ? CCR_RSTA : 0;
+
+	/* Start as master */
+	writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+	/* Write target byte */
+	writeb((target << 1), i2c->base + MPC_I2C_DR);
+
+	result = i2c_wait(i2c, timeout, 1);
+	if (result < 0)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		/* Write data byte */
+		writeb(data[i], i2c->base + MPC_I2C_DR);
+
+		result = i2c_wait(i2c, timeout, 1);
+		if (result < 0)
+			return result;
+	}
+
+	return 0;
+}
+
+static int mpc_read(struct mpc_i2c *i2c, int target,
+		    u8 *data, int length, int restart, bool recv_len)
+{
+	unsigned timeout = i2c->adap.timeout;
+	int i, result;
+	u32 flags = restart ? CCR_RSTA : 0;
+
+	/* Switch to read - restart */
+	writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+	/* Write target address byte - this time with the read flag set */
+	writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
+
+	result = i2c_wait(i2c, timeout, 1);
+	if (result < 0)
+		return result;
+
+	if (length) {
+		if (length == 1 && !recv_len)
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
+		else
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
+		/* Dummy read */
+		readb(i2c->base + MPC_I2C_DR);
+	}
+
+	for (i = 0; i < length; i++) {
+		u8 byte;
+
+		result = i2c_wait(i2c, timeout, 0);
+		if (result < 0)
+			return result;
+
+		/*
+		 * For block reads, we have to know the total length (1st byte)
+		 * before we can determine if we are done.
+		 */
+		if (i || !recv_len) {
+			/* Generate txack on next to last byte */
+			if (i == length - 2)
+				writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+					 | CCR_TXAK);
+			/* Do not generate stop on last byte */
+			if (i == length - 1)
+				writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+					 | CCR_MTX);
+		}
+
+		byte = readb(i2c->base + MPC_I2C_DR);
+
+		/*
+		 * Adjust length if first received byte is length.
+		 * The length is 1 length byte plus actually data length
+		 */
+		if (i == 0 && recv_len) {
+			if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
+				return -EPROTO;
+			length += byte;
+			/*
+			 * For block reads, generate txack here if data length
+			 * is 1 byte (total length is 2 bytes).
+			 */
+			if (length == 2)
+				writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
+					 | CCR_TXAK);
+		}
+		data[i] = byte;
+	}
+
+	return length;
+}
+
+static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int i;
+	int ret = 0;
+	unsigned long orig_jiffies = jiffies;
+	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+	mpc_i2c_start(i2c);
+
+	/* Allow bus up to 1s to become not busy */
+	while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+		if (signal_pending(current)) {
+			dev_dbg(i2c->dev, "Interrupted\n");
+			writeccr(i2c, 0);
+			return -EINTR;
+		}
+		if (time_after(jiffies, orig_jiffies + HZ)) {
+			u8 status = readb(i2c->base + MPC_I2C_SR);
+
+			dev_dbg(i2c->dev, "timeout\n");
+			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+				writeb(status & ~CSR_MAL,
+				       i2c->base + MPC_I2C_SR);
+				mpc_i2c_fixup(i2c);
+			}
+			return -EIO;
+		}
+		schedule();
+	}
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+		dev_dbg(i2c->dev,
+			"Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+			pmsg->flags & I2C_M_RD ? "read" : "write",
+			pmsg->len, pmsg->addr, i + 1, num);
+		if (pmsg->flags & I2C_M_RD) {
+			bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
+
+			ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
+				       recv_len);
+			if (recv_len && ret > 0)
+				pmsg->len = ret;
+		} else {
+			ret =
+			    mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
+		}
+	}
+	mpc_i2c_stop(i2c); /* Initiate STOP */
+	orig_jiffies = jiffies;
+	/* Wait until STOP is seen, allow up to 1 s */
+	while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+		if (time_after(jiffies, orig_jiffies + HZ)) {
+			u8 status = readb(i2c->base + MPC_I2C_SR);
+
+			dev_dbg(i2c->dev, "timeout\n");
+			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+				writeb(status & ~CSR_MAL,
+				       i2c->base + MPC_I2C_SR);
+				mpc_i2c_fixup(i2c);
+			}
+			return -EIO;
+		}
+		cond_resched();
+	}
+	return (ret < 0) ? ret : num;
+}
+
+static u32 mpc_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+	  | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm mpc_algo = {
+	.master_xfer = mpc_xfer,
+	.functionality = mpc_functionality,
+};
+
+static struct i2c_adapter mpc_ops = {
+	.owner = THIS_MODULE,
+	.algo = &mpc_algo,
+	.timeout = HZ,
+};
+
+static const struct of_device_id mpc_i2c_of_match[];
+static int fsl_i2c_probe(struct platform_device *op)
+{
+	const struct of_device_id *match;
+	struct mpc_i2c *i2c;
+	const u32 *prop;
+	u32 clock = MPC_I2C_CLOCK_LEGACY;
+	int result = 0;
+	int plen;
+	struct resource res;
+	struct clk *clk;
+	int err;
+
+	match = of_match_device(mpc_i2c_of_match, &op->dev);
+	if (!match)
+		return -EINVAL;
+
+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->dev = &op->dev; /* for debug and error output */
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->base = of_iomap(op->dev.of_node, 0);
+	if (!i2c->base) {
+		dev_err(i2c->dev, "failed to map controller\n");
+		result = -ENOMEM;
+		goto fail_map;
+	}
+
+	i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
+	if (i2c->irq) { /* no i2c->irq implies polling */
+		result = request_irq(i2c->irq, mpc_i2c_isr,
+				     IRQF_SHARED, "i2c-mpc", i2c);
+		if (result < 0) {
+			dev_err(i2c->dev, "failed to attach interrupt\n");
+			goto fail_request;
+		}
+	}
+
+	/*
+	 * enable clock for the I2C peripheral (non fatal),
+	 * keep a reference upon successful allocation
+	 */
+	clk = devm_clk_get(&op->dev, NULL);
+	if (!IS_ERR(clk)) {
+		err = clk_prepare_enable(clk);
+		if (err) {
+			dev_err(&op->dev, "failed to enable clock\n");
+			goto fail_request;
+		} else {
+			i2c->clk_per = clk;
+		}
+	}
+
+	if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) {
+		clock = MPC_I2C_CLOCK_PRESERVE;
+	} else {
+		prop = of_get_property(op->dev.of_node, "clock-frequency",
+					&plen);
+		if (prop && plen == sizeof(u32))
+			clock = *prop;
+	}
+
+	if (match->data) {
+		const struct mpc_i2c_data *data = match->data;
+		data->setup(op->dev.of_node, i2c, clock, data->prescaler);
+	} else {
+		/* Backwards compatibility */
+		if (of_get_property(op->dev.of_node, "dfsrr", NULL))
+			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
+	}
+
+	prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
+	if (prop && plen == sizeof(u32)) {
+		mpc_ops.timeout = *prop * HZ / 1000000;
+		if (mpc_ops.timeout < 5)
+			mpc_ops.timeout = 5;
+	}
+	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+
+	platform_set_drvdata(op, i2c);
+
+	i2c->adap = mpc_ops;
+	of_address_to_resource(op->dev.of_node, 0, &res);
+	scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		  "MPC adapter at 0x%llx", (unsigned long long)res.start);
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &op->dev;
+	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+
+	result = i2c_add_adapter(&i2c->adap);
+	if (result < 0)
+		goto fail_add;
+
+	return result;
+
+ fail_add:
+	if (i2c->clk_per)
+		clk_disable_unprepare(i2c->clk_per);
+	free_irq(i2c->irq, i2c);
+ fail_request:
+	irq_dispose_mapping(i2c->irq);
+	iounmap(i2c->base);
+ fail_map:
+	kfree(i2c);
+	return result;
+};
+
+static int fsl_i2c_remove(struct platform_device *op)
+{
+	struct mpc_i2c *i2c = platform_get_drvdata(op);
+
+	i2c_del_adapter(&i2c->adap);
+
+	if (i2c->clk_per)
+		clk_disable_unprepare(i2c->clk_per);
+
+	if (i2c->irq)
+		free_irq(i2c->irq, i2c);
+
+	irq_dispose_mapping(i2c->irq);
+	iounmap(i2c->base);
+	kfree(i2c);
+	return 0;
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int mpc_i2c_suspend(struct device *dev)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+	i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+	return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+	writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+	writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#define MPC_I2C_PM_OPS	(&mpc_i2c_pm_ops)
+#else
+#define MPC_I2C_PM_OPS	NULL
+#endif
+
+static const struct mpc_i2c_data mpc_i2c_data_512x = {
+	.setup = mpc_i2c_setup_512x,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_52xx = {
+	.setup = mpc_i2c_setup_52xx,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8313 = {
+	.setup = mpc_i2c_setup_8xxx,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8543 = {
+	.setup = mpc_i2c_setup_8xxx,
+	.prescaler = 2,
+};
+
+static const struct mpc_i2c_data mpc_i2c_data_8544 = {
+	.setup = mpc_i2c_setup_8xxx,
+	.prescaler = 3,
+};
+
+static const struct of_device_id mpc_i2c_of_match[] = {
+	{.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
+	{.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+	{.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+	{.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
+	/* Backward compatibility */
+	{.compatible = "fsl-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
+
+/* Structure for a device driver */
+static struct platform_driver mpc_i2c_driver = {
+	.probe		= fsl_i2c_probe,
+	.remove		= fsl_i2c_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = mpc_i2c_of_match,
+		.pm = MPC_I2C_PM_OPS,
+	},
+};
+
+module_platform_driver(mpc_i2c_driver);
+
+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
+MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
+		   "MPC824x/83xx/85xx/86xx/512x/52xx processors");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mt65xx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mt65xx.c
new file mode 100644
index 0000000..cbbf48d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mt65xx.c
@@ -0,0 +1,1089 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Xudong Chen <xudong.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#define I2C_RS_TRANSFER			(1 << 4)
+#define I2C_ARB_LOST			(1 << 3)
+#define I2C_HS_NACKERR			(1 << 2)
+#define I2C_ACKERR			(1 << 1)
+#define I2C_TRANSAC_COMP		(1 << 0)
+#define I2C_TRANSAC_START		(1 << 0)
+#define I2C_RESUME_ARBIT		(1 << 1)
+#define I2C_RS_MUL_CNFG			(1 << 15)
+#define I2C_RS_MUL_TRIG			(1 << 14)
+#define I2C_DCM_DISABLE			0x0000
+#define I2C_IO_CONFIG_OPEN_DRAIN	0x0003
+#define I2C_IO_CONFIG_PUSH_PULL		0x0000
+#define I2C_SOFT_RST			0x0001
+#define I2C_FIFO_ADDR_CLR		0x0003
+#define I2C_HFIFO_DATA			0x8208
+#define I2C_FIFO_ADDR_CLR_MCH		0x0004
+#define I2C_DELAY_LEN			0x0002
+#define I2C_ST_START_CON		0x8001
+#define I2C_FS_START_CON		0x1800
+#define I2C_TIME_CLR_VALUE		0x0000
+#define I2C_TIME_DEFAULT_VALUE		0x0083
+#define I2C_WRRD_TRANAC_VALUE		0x0002
+#define I2C_RD_TRANAC_VALUE		0x0001
+
+#define I2C_DMA_CON_TX			0x0000
+#define I2C_DMA_CON_RX			0x0001
+#define I2C_DMA_START_EN		0x0001
+#define I2C_DMA_INT_FLAG_NONE		0x0000
+#define I2C_DMA_CLR_FLAG		0x0000
+#define I2C_DMA_HARD_RST		0x0002
+#define I2C_DMA_4G_MODE			0x0001
+
+#define I2C_DEFAULT_CLK_DIV		5
+#define I2C_DEFAULT_SPEED		100000	/* hz */
+#define MAX_FS_MODE_SPEED		400000
+#define MAX_HS_MODE_SPEED		3400000
+#define MAX_SAMPLE_CNT_DIV		8
+#define MAX_STEP_CNT_DIV		64
+#define MAX_HS_STEP_CNT_DIV		8
+
+#define I2C_CONTROL_RS                  (0x1 << 1)
+#define I2C_CONTROL_DMA_EN              (0x1 << 2)
+#define I2C_CONTROL_CLK_EXT_EN          (0x1 << 3)
+#define I2C_CONTROL_DIR_CHANGE          (0x1 << 4)
+#define I2C_CONTROL_ACKERR_DET_EN       (0x1 << 5)
+#define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
+#define I2C_CONTROL_DMAACK_EN           (0x1 << 8)
+#define I2C_CONTROL_ASYNC_MODE          (0x1 << 9)
+#define I2C_CONTROL_WRAPPER             (0x1 << 0)
+
+#define I2C_DRV_NAME		"i2c-mt65xx"
+
+enum DMA_REGS_OFFSET {
+	OFFSET_INT_FLAG = 0x0,
+	OFFSET_INT_EN = 0x04,
+	OFFSET_EN = 0x08,
+	OFFSET_RST = 0x0c,
+	OFFSET_CON = 0x18,
+	OFFSET_TX_MEM_ADDR = 0x1c,
+	OFFSET_RX_MEM_ADDR = 0x20,
+	OFFSET_TX_LEN = 0x24,
+	OFFSET_RX_LEN = 0x28,
+	OFFSET_TX_4G_MODE = 0x54,
+	OFFSET_RX_4G_MODE = 0x58,
+};
+
+enum i2c_trans_st_rs {
+	I2C_TRANS_STOP = 0,
+	I2C_TRANS_REPEATED_START,
+};
+
+enum mtk_trans_op {
+	I2C_MASTER_WR = 1,
+	I2C_MASTER_RD,
+	I2C_MASTER_WRRD,
+};
+
+enum I2C_REGS_OFFSET {
+	OFFSET_DATA_PORT,
+	OFFSET_SLAVE_ADDR,
+	OFFSET_INTR_MASK,
+	OFFSET_INTR_STAT,
+	OFFSET_CONTROL,
+	OFFSET_TRANSFER_LEN,
+	OFFSET_TRANSAC_LEN,
+	OFFSET_DELAY_LEN,
+	OFFSET_TIMING,
+	OFFSET_START,
+	OFFSET_EXT_CONF,
+	OFFSET_FIFO_STAT,
+	OFFSET_FIFO_THRESH,
+	OFFSET_FIFO_ADDR_CLR,
+	OFFSET_IO_CONFIG,
+	OFFSET_RSV_DEBUG,
+	OFFSET_HS,
+	OFFSET_SOFTRESET,
+	OFFSET_DCM_EN,
+	OFFSET_PATH_DIR,
+	OFFSET_DEBUGSTAT,
+	OFFSET_DEBUGCTRL,
+	OFFSET_TRANSFER_LEN_AUX,
+	OFFSET_CLOCK_DIV,
+	/* MT8183 only regs */
+	OFFSET_LTIMING,
+	OFFSET_DATA_TIMING,
+	OFFSET_MCU_INTR,
+	OFFSET_HW_TIMEOUT,
+	OFFSET_HFIFO_DATA,
+	OFFSET_HFIFO_STAT,
+	OFFSET_MULTI_DMA,
+	OFFSET_ROLLBACK,
+};
+
+static const u16 mt_i2c_regs_v1[] = {
+	[OFFSET_DATA_PORT] = 0x0,
+	[OFFSET_SLAVE_ADDR] = 0x4,
+	[OFFSET_INTR_MASK] = 0x8,
+	[OFFSET_INTR_STAT] = 0xc,
+	[OFFSET_CONTROL] = 0x10,
+	[OFFSET_TRANSFER_LEN] = 0x14,
+	[OFFSET_TRANSAC_LEN] = 0x18,
+	[OFFSET_DELAY_LEN] = 0x1c,
+	[OFFSET_TIMING] = 0x20,
+	[OFFSET_START] = 0x24,
+	[OFFSET_EXT_CONF] = 0x28,
+	[OFFSET_FIFO_STAT] = 0x30,
+	[OFFSET_FIFO_THRESH] = 0x34,
+	[OFFSET_FIFO_ADDR_CLR] = 0x38,
+	[OFFSET_IO_CONFIG] = 0x40,
+	[OFFSET_RSV_DEBUG] = 0x44,
+	[OFFSET_HS] = 0x48,
+	[OFFSET_SOFTRESET] = 0x50,
+	[OFFSET_DCM_EN] = 0x54,
+	[OFFSET_PATH_DIR] = 0x60,
+	[OFFSET_DEBUGSTAT] = 0x64,
+	[OFFSET_DEBUGCTRL] = 0x68,
+	[OFFSET_TRANSFER_LEN_AUX] = 0x6c,
+	[OFFSET_CLOCK_DIV] = 0x70,
+};
+
+static const u16 mt_i2c_regs_v2[] = {
+	[OFFSET_DATA_PORT] = 0x0,
+	[OFFSET_SLAVE_ADDR] = 0x4,
+	[OFFSET_INTR_MASK] = 0x8,
+	[OFFSET_INTR_STAT] = 0xc,
+	[OFFSET_CONTROL] = 0x10,
+	[OFFSET_TRANSFER_LEN] = 0x14,
+	[OFFSET_TRANSAC_LEN] = 0x18,
+	[OFFSET_DELAY_LEN] = 0x1c,
+	[OFFSET_TIMING] = 0x20,
+	[OFFSET_START] = 0x24,
+	[OFFSET_EXT_CONF] = 0x28,
+	[OFFSET_LTIMING] = 0x2c,
+	[OFFSET_HS] = 0x30,
+	[OFFSET_IO_CONFIG] = 0x34,
+	[OFFSET_FIFO_ADDR_CLR] = 0x38,
+	[OFFSET_DATA_TIMING] = 0x3c,
+	[OFFSET_MCU_INTR] = 0x40,
+	[OFFSET_TRANSFER_LEN_AUX] = 0x44,
+	[OFFSET_CLOCK_DIV] = 0x48,
+	[OFFSET_HW_TIMEOUT] = 0x4c,
+	[OFFSET_SOFTRESET] = 0x50,
+	[OFFSET_HFIFO_DATA] = 0x70,
+	[OFFSET_DEBUGSTAT] = 0xe0,
+	[OFFSET_DEBUGCTRL] = 0xe8,
+	[OFFSET_FIFO_STAT] = 0xf4,
+	[OFFSET_FIFO_THRESH] = 0xf8,
+	[OFFSET_HFIFO_STAT] = 0xfc,
+	[OFFSET_DCM_EN] = 0xf88,
+	[OFFSET_MULTI_DMA] = 0xf8c,
+	[OFFSET_ROLLBACK] = 0xf98,
+};
+
+struct mtk_i2c_compatible {
+	const struct i2c_adapter_quirks *quirks;
+	const u16 *regs;
+	unsigned char pmic_i2c: 1;
+	unsigned char dcm: 1;
+	unsigned char auto_restart: 1;
+	unsigned char aux_len_reg: 1;
+	unsigned char support_33bits: 1;
+	unsigned char timing_adjust: 1;
+};
+
+struct mtk_i2c {
+	struct i2c_adapter adap;	/* i2c host adapter */
+	struct device *dev;
+	struct completion msg_complete;
+
+	/* set in i2c probe */
+	void __iomem *base;		/* i2c base addr */
+	void __iomem *pdmabase;		/* dma base address*/
+	struct clk *clk_main;		/* main clock for i2c bus */
+	struct clk *clk_dma;		/* DMA clock for i2c via DMA */
+	struct clk *clk_pmic;		/* PMIC clock for i2c from PMIC */
+	struct clk *clk_arb;		/* Arbitrator clock for i2c */
+	bool have_pmic;			/* can use i2c pins from PMIC */
+	bool use_push_pull;		/* IO config push-pull mode */
+	u32 ch_offset;			/* i2c multi-user channel offset */
+
+	u16 irq_stat;			/* interrupt status */
+	unsigned int clk_src_div;
+	unsigned int speed_hz;		/* The speed in transfer */
+	enum mtk_trans_op op;
+	u16 timing_reg;
+	u16 high_speed_reg;
+	u16 ltiming_reg;
+	unsigned char auto_restart;
+	bool ignore_restart_irq;
+	const struct mtk_i2c_compatible *dev_comp;
+};
+
+static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_num_msgs = 1,
+	.max_write_len = 255,
+	.max_read_len = 255,
+	.max_comb_1st_msg_len = 255,
+	.max_comb_2nd_msg_len = 31,
+};
+
+static const struct i2c_adapter_quirks mt7622_i2c_quirks = {
+	.max_num_msgs = 255,
+};
+
+static const struct mtk_i2c_compatible mt2712_compat = {
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 1,
+	.timing_adjust = 1,
+};
+
+static const struct mtk_i2c_compatible mt6577_compat = {
+	.quirks = &mt6577_i2c_quirks,
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 0,
+	.aux_len_reg = 0,
+	.support_33bits = 0,
+	.timing_adjust = 0,
+};
+
+static const struct mtk_i2c_compatible mt6589_compat = {
+	.quirks = &mt6577_i2c_quirks,
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 1,
+	.dcm = 0,
+	.auto_restart = 0,
+	.aux_len_reg = 0,
+	.support_33bits = 0,
+	.timing_adjust = 0,
+};
+
+static const struct mtk_i2c_compatible mt7622_compat = {
+	.quirks = &mt7622_i2c_quirks,
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 0,
+	.timing_adjust = 0,
+};
+
+static const struct mtk_i2c_compatible mt8173_compat = {
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 1,
+	.timing_adjust = 0,
+};
+
+static const struct mtk_i2c_compatible mt8183_compat = {
+	.regs = mt_i2c_regs_v2,
+	.pmic_i2c = 0,
+	.dcm = 0,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 1,
+	.timing_adjust = 1,
+};
+
+static const struct of_device_id mtk_i2c_of_match[] = {
+	{ .compatible = "mediatek,mt2712-i2c", .data = &mt2712_compat },
+	{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
+	{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
+	{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
+	{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
+	{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
+
+static u16 mtk_i2c_readw(struct mtk_i2c *i2c, enum I2C_REGS_OFFSET reg)
+{
+	return readw(i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
+}
+
+static void mtk_i2c_writew(struct mtk_i2c *i2c, u16 val,
+			   enum I2C_REGS_OFFSET reg)
+{
+	writew(val, i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
+}
+
+static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
+{
+	int ret;
+
+	ret = clk_prepare_enable(i2c->clk_dma);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(i2c->clk_main);
+	if (ret)
+		goto err_main;
+
+	if (i2c->have_pmic) {
+		ret = clk_prepare_enable(i2c->clk_pmic);
+		if (ret)
+			goto err_pmic;
+	}
+
+	if (i2c->clk_arb) {
+		ret = clk_prepare_enable(i2c->clk_arb);
+		if (ret)
+			goto err_arb;
+	}
+
+	return 0;
+
+err_arb:
+	if (i2c->have_pmic)
+		clk_disable_unprepare(i2c->clk_pmic);
+err_pmic:
+	clk_disable_unprepare(i2c->clk_main);
+err_main:
+	clk_disable_unprepare(i2c->clk_dma);
+
+	return ret;
+}
+
+static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
+{
+	if (i2c->clk_arb)
+		clk_disable_unprepare(i2c->clk_arb);
+
+	if (i2c->have_pmic)
+		clk_disable_unprepare(i2c->clk_pmic);
+
+	clk_disable_unprepare(i2c->clk_main);
+	clk_disable_unprepare(i2c->clk_dma);
+}
+
+static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
+{
+	u16 control_reg;
+
+	mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET);
+
+	/* Set ioconfig */
+	if (i2c->use_push_pull)
+		mtk_i2c_writew(i2c, I2C_IO_CONFIG_PUSH_PULL, OFFSET_IO_CONFIG);
+	else
+		mtk_i2c_writew(i2c, I2C_IO_CONFIG_OPEN_DRAIN, OFFSET_IO_CONFIG);
+
+	if (i2c->dev_comp->dcm)
+		mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
+
+	if (i2c->ch_offset)
+		writew(I2C_RESUME_ARBIT, i2c->base +
+					 i2c->dev_comp->regs[OFFSET_START]);
+
+	if (i2c->dev_comp->timing_adjust)
+		mtk_i2c_writew(i2c, (I2C_DEFAULT_CLK_DIV - 1) |
+				    (I2C_DEFAULT_CLK_DIV - 1) << 8,
+				    OFFSET_CLOCK_DIV);
+
+	mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
+	mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
+	if (i2c->dev_comp->regs == mt_i2c_regs_v2)
+		mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+
+	/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
+	if (i2c->have_pmic)
+		mtk_i2c_writew(i2c, I2C_CONTROL_WRAPPER, OFFSET_PATH_DIR);
+
+	control_reg = I2C_CONTROL_ACKERR_DET_EN | I2C_CONTROL_DMAACK_EN |
+		      I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN |
+		      I2C_CONTROL_ASYNC_MODE;
+	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
+	mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
+
+	writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
+	udelay(50);
+	writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
+}
+
+/*
+ * Calculate i2c port speed
+ *
+ * Hardware design:
+ * i2c_bus_freq = parent_clk / (clock_div * 2 * sample_cnt * step_cnt)
+ * clock_div: fixed in hardware, but may be various in different SoCs
+ *
+ * The calculation want to pick the highest bus frequency that is still
+ * less than or equal to i2c->speed_hz. The calculation try to get
+ * sample_cnt and step_cn
+ */
+static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
+				   unsigned int target_speed,
+				   unsigned int *timing_step_cnt,
+				   unsigned int *timing_sample_cnt)
+{
+	unsigned int step_cnt;
+	unsigned int sample_cnt;
+	unsigned int max_step_cnt;
+	unsigned int base_sample_cnt = MAX_SAMPLE_CNT_DIV;
+	unsigned int base_step_cnt;
+	unsigned int opt_div;
+	unsigned int best_mul;
+	unsigned int cnt_mul;
+
+	if (target_speed > MAX_HS_MODE_SPEED)
+		target_speed = MAX_HS_MODE_SPEED;
+
+	if (target_speed > MAX_FS_MODE_SPEED)
+		max_step_cnt = MAX_HS_STEP_CNT_DIV;
+	else
+		max_step_cnt = MAX_STEP_CNT_DIV;
+
+	base_step_cnt = max_step_cnt;
+	/* Find the best combination */
+	opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
+	best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
+
+	/* Search for the best pair (sample_cnt, step_cnt) with
+	 * 0 < sample_cnt < MAX_SAMPLE_CNT_DIV
+	 * 0 < step_cnt < max_step_cnt
+	 * sample_cnt * step_cnt >= opt_div
+	 * optimizing for sample_cnt * step_cnt being minimal
+	 */
+	for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) {
+		step_cnt = DIV_ROUND_UP(opt_div, sample_cnt);
+		cnt_mul = step_cnt * sample_cnt;
+		if (step_cnt > max_step_cnt)
+			continue;
+
+		if (cnt_mul < best_mul) {
+			best_mul = cnt_mul;
+			base_sample_cnt = sample_cnt;
+			base_step_cnt = step_cnt;
+			if (best_mul == opt_div)
+				break;
+		}
+	}
+
+	sample_cnt = base_sample_cnt;
+	step_cnt = base_step_cnt;
+
+	if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
+		/* In this case, hardware can't support such
+		 * low i2c_bus_freq
+		 */
+		dev_dbg(i2c->dev, "Unsupported speed (%uhz)\n",	target_speed);
+		return -EINVAL;
+	}
+
+	*timing_step_cnt = step_cnt - 1;
+	*timing_sample_cnt = sample_cnt - 1;
+
+	return 0;
+}
+
+static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+{
+	unsigned int clk_src;
+	unsigned int step_cnt;
+	unsigned int sample_cnt;
+	unsigned int l_step_cnt;
+	unsigned int l_sample_cnt;
+	unsigned int target_speed;
+	int ret;
+
+	clk_src = parent_clk / i2c->clk_src_div;
+	target_speed = i2c->speed_hz;
+
+	if (target_speed > MAX_FS_MODE_SPEED) {
+		/* Set master code speed register */
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+					      &l_step_cnt, &l_sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
+
+		/* Set the high speed mode register */
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+					      &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
+			(sample_cnt << 12) | (step_cnt << 8);
+		i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
+				   (sample_cnt << 12) | (step_cnt << 9);
+	} else {
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+					      &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
+		/* Disable the high speed transaction */
+		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+
+		i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
+	}
+
+	return 0;
+}
+
+static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
+{
+	return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
+}
+
+static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
+			       int num, int left_num)
+{
+	u16 addr_reg;
+	u16 start_reg;
+	u16 control_reg;
+	u16 restart_flag = 0;
+	u32 reg_4g_mode;
+	u8 *w_buf = NULL;
+	u8 *r_buf = NULL;
+	dma_addr_t rpaddr = 0;
+	dma_addr_t wpaddr = 0;
+	int ret;
+
+	i2c->irq_stat = 0;
+
+	if (i2c->auto_restart)
+		restart_flag = I2C_RS_TRANSFER;
+
+	reinit_completion(&i2c->msg_complete);
+
+	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
+			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
+	if ((i2c->speed_hz > 400000) || (left_num >= 1))
+		control_reg |= I2C_CONTROL_RS;
+
+	if (i2c->op == I2C_MASTER_WRRD)
+		control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS;
+
+	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
+
+	/* set start condition */
+	if (i2c->speed_hz <= 100000)
+		mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
+	else
+		mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
+
+	addr_reg = i2c_8bit_addr_from_msg(msgs);
+	mtk_i2c_writew(i2c, addr_reg, OFFSET_SLAVE_ADDR);
+
+	/* Clear interrupt status */
+	mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
+			    I2C_ARB_LOST | I2C_TRANSAC_COMP,
+			    OFFSET_INTR_STAT);
+
+	mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR,
+			    OFFSET_FIFO_ADDR_CLR);
+
+	if ((i2c->speed_hz > 400000) && (i2c->dev_comp->regs == mt_i2c_regs_v2))
+		mtk_i2c_writew(i2c, I2C_HFIFO_DATA, OFFSET_HFIFO_DATA);
+
+	/* Enable interrupt */
+	mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
+			    I2C_ARB_LOST | I2C_TRANSAC_COMP,
+			    OFFSET_INTR_MASK);
+
+	/* Set transfer and transaction len */
+	if (i2c->op == I2C_MASTER_WRRD) {
+		if (i2c->dev_comp->aux_len_reg) {
+			mtk_i2c_writew(i2c, msgs->len, OFFSET_TRANSFER_LEN);
+			mtk_i2c_writew(i2c, (msgs + 1)->len,
+					    OFFSET_TRANSFER_LEN_AUX);
+		} else {
+			mtk_i2c_writew(i2c, msgs->len | ((msgs + 1)->len) << 8,
+					    OFFSET_TRANSFER_LEN);
+		}
+		mtk_i2c_writew(i2c, I2C_WRRD_TRANAC_VALUE, OFFSET_TRANSAC_LEN);
+	} else {
+		mtk_i2c_writew(i2c, msgs->len, OFFSET_TRANSFER_LEN);
+		mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
+	}
+
+	/* Prepare buffer data to start transfer */
+	if (i2c->op == I2C_MASTER_RD) {
+		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
+		writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
+
+		r_buf = kzalloc(msgs->len, GFP_KERNEL);
+		if (r_buf == NULL)
+			return -ENOMEM;
+
+		rpaddr = dma_map_single(i2c->dev, r_buf,
+					msgs->len, DMA_FROM_DEVICE);
+		if (dma_mapping_error(i2c->dev, rpaddr)) {
+			kfree(r_buf);
+			return -ENOMEM;
+		}
+
+		if (i2c->dev_comp->support_33bits) {
+			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
+		}
+
+		writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
+		writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
+	} else if (i2c->op == I2C_MASTER_WR) {
+		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
+		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
+
+		w_buf = kzalloc(msgs->len, GFP_KERNEL);
+		if (w_buf == NULL)
+			return -ENOMEM;
+
+		memcpy(w_buf, msgs->buf, msgs->len);
+
+		wpaddr = dma_map_single(i2c->dev, w_buf,
+					msgs->len, DMA_TO_DEVICE);
+		if (dma_mapping_error(i2c->dev, wpaddr)) {
+			kfree(w_buf);
+			return -ENOMEM;
+		}
+
+		if (i2c->dev_comp->support_33bits) {
+			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
+		}
+
+		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
+		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
+	} else {
+		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
+		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
+
+		w_buf = kzalloc(msgs->len, GFP_KERNEL);
+		if (w_buf == NULL)
+			return -ENOMEM;
+		r_buf = kzalloc((msgs + 1)->len, GFP_KERNEL);
+		if (r_buf == NULL) {
+			kfree(w_buf);
+			return -ENOMEM;
+		}
+
+		memcpy(w_buf, msgs->buf, msgs->len);
+
+		wpaddr = dma_map_single(i2c->dev, w_buf,
+					msgs->len, DMA_TO_DEVICE);
+		if (dma_mapping_error(i2c->dev, wpaddr)) {
+			kfree(w_buf);
+			kfree(r_buf);
+			return -ENOMEM;
+		}
+		rpaddr = dma_map_single(i2c->dev, r_buf,
+					(msgs + 1)->len,
+					DMA_FROM_DEVICE);
+		if (dma_mapping_error(i2c->dev, rpaddr)) {
+			dma_unmap_single(i2c->dev, wpaddr,
+					 msgs->len, DMA_TO_DEVICE);
+			kfree(w_buf);
+			kfree(r_buf);
+			return -ENOMEM;
+		}
+
+		if (i2c->dev_comp->support_33bits) {
+			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
+
+			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+			writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
+		}
+
+		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
+		writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
+		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
+		writel((msgs + 1)->len, i2c->pdmabase + OFFSET_RX_LEN);
+	}
+
+	writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN);
+
+	if (!i2c->auto_restart) {
+		start_reg = I2C_TRANSAC_START;
+	} else {
+		start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG;
+		if (left_num >= 1)
+			start_reg |= I2C_RS_MUL_CNFG;
+	}
+	mtk_i2c_writew(i2c, start_reg, OFFSET_START);
+
+	ret = wait_for_completion_timeout(&i2c->msg_complete,
+					  i2c->adap.timeout);
+
+	/* Clear interrupt mask */
+	mtk_i2c_writew(i2c, ~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
+			    I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
+
+	if (i2c->op == I2C_MASTER_WR) {
+		dma_unmap_single(i2c->dev, wpaddr,
+				 msgs->len, DMA_TO_DEVICE);
+		kfree(w_buf);
+	} else if (i2c->op == I2C_MASTER_RD) {
+		dma_unmap_single(i2c->dev, rpaddr,
+				 msgs->len, DMA_FROM_DEVICE);
+		memcpy(msgs->buf, r_buf, msgs->len);
+		kfree(r_buf);
+	} else {
+		dma_unmap_single(i2c->dev, wpaddr, msgs->len,
+				 DMA_TO_DEVICE);
+		dma_unmap_single(i2c->dev, rpaddr, (msgs + 1)->len,
+				 DMA_FROM_DEVICE);
+		memcpy((msgs + 1)->buf, r_buf, (msgs + 1)->len);
+		kfree(w_buf);
+		kfree(r_buf);
+	}
+
+	if (ret == 0) {
+		dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+		mtk_i2c_init_hw(i2c);
+		return -ETIMEDOUT;
+	}
+
+	completion_done(&i2c->msg_complete);
+
+	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
+		dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
+		mtk_i2c_init_hw(i2c);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int mtk_i2c_transfer(struct i2c_adapter *adap,
+			    struct i2c_msg msgs[], int num)
+{
+	int ret;
+	int left_num = num;
+	struct mtk_i2c *i2c = i2c_get_adapdata(adap);
+
+	ret = mtk_i2c_clock_enable(i2c);
+	if (ret)
+		return ret;
+
+	i2c->auto_restart = i2c->dev_comp->auto_restart;
+
+	/* checking if we can skip restart and optimize using WRRD mode */
+	if (i2c->auto_restart && num == 2) {
+		if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
+		    msgs[0].addr == msgs[1].addr) {
+			i2c->auto_restart = 0;
+		}
+	}
+
+	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
+		/* ignore the first restart irq after the master code,
+		 * otherwise the first transfer will be discarded.
+		 */
+		i2c->ignore_restart_irq = true;
+	else
+		i2c->ignore_restart_irq = false;
+
+	while (left_num--) {
+		if (!msgs->buf) {
+			dev_dbg(i2c->dev, "data buffer is NULL.\n");
+			ret = -EINVAL;
+			goto err_exit;
+		}
+
+		if (msgs->flags & I2C_M_RD)
+			i2c->op = I2C_MASTER_RD;
+		else
+			i2c->op = I2C_MASTER_WR;
+
+		if (!i2c->auto_restart) {
+			if (num > 1) {
+				/* combined two messages into one transaction */
+				i2c->op = I2C_MASTER_WRRD;
+				left_num--;
+			}
+		}
+
+		/* always use DMA mode. */
+		ret = mtk_i2c_do_transfer(i2c, msgs, num, left_num);
+		if (ret < 0)
+			goto err_exit;
+
+		msgs++;
+	}
+	/* the return value is number of executed messages */
+	ret = num;
+
+err_exit:
+	mtk_i2c_clock_disable(i2c);
+	return ret;
+}
+
+static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
+{
+	struct mtk_i2c *i2c = dev_id;
+	u16 restart_flag = 0;
+	u16 intr_stat;
+
+	if (i2c->auto_restart)
+		restart_flag = I2C_RS_TRANSFER;
+
+	intr_stat = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
+	mtk_i2c_writew(i2c, intr_stat, OFFSET_INTR_STAT);
+
+	/*
+	 * when occurs ack error, i2c controller generate two interrupts
+	 * first is the ack error interrupt, then the complete interrupt
+	 * i2c->irq_stat need keep the two interrupt value.
+	 */
+	i2c->irq_stat |= intr_stat;
+
+	if (i2c->ignore_restart_irq && (i2c->irq_stat & restart_flag)) {
+		i2c->ignore_restart_irq = false;
+		i2c->irq_stat = 0;
+		mtk_i2c_writew(i2c, I2C_RS_MUL_CNFG | I2C_RS_MUL_TRIG |
+				    I2C_TRANSAC_START, OFFSET_START);
+	} else {
+		if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag))
+			complete(&i2c->msg_complete);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm mtk_i2c_algorithm = {
+	.master_xfer = mtk_i2c_transfer,
+	.functionality = mtk_i2c_functionality,
+};
+
+static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
+	if (ret < 0)
+		i2c->speed_hz = I2C_DEFAULT_SPEED;
+
+	ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
+	if (ret < 0)
+		return ret;
+
+	if (i2c->clk_src_div == 0)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "ch_offset", &i2c->ch_offset);
+	if (ret < 0)
+		i2c->ch_offset = 0;
+
+	i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
+	i2c->use_push_pull =
+		of_property_read_bool(np, "mediatek,use-push-pull");
+
+	return 0;
+}
+
+static int mtk_i2c_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	int ret = 0;
+	struct mtk_i2c *i2c;
+	struct clk *clk;
+	struct resource *res;
+	int irq;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->pdmabase))
+		return PTR_ERR(i2c->pdmabase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq;
+
+	init_completion(&i2c->msg_complete);
+
+	of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node);
+	if (!of_id)
+		return -EINVAL;
+
+	i2c->dev_comp = of_id->data;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+	i2c->dev = &pdev->dev;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &mtk_i2c_algorithm;
+	i2c->adap.quirks = i2c->dev_comp->quirks;
+	i2c->adap.timeout = 2 * HZ;
+	i2c->adap.retries = 1;
+
+	ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
+	if (ret)
+		return -EINVAL;
+
+	if (i2c->dev_comp->timing_adjust)
+		i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
+	if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
+		return -EINVAL;
+
+	i2c->clk_main = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(i2c->clk_main)) {
+		dev_err(&pdev->dev, "cannot get main clock\n");
+		return PTR_ERR(i2c->clk_main);
+	}
+
+	i2c->clk_dma = devm_clk_get(&pdev->dev, "dma");
+	if (IS_ERR(i2c->clk_dma)) {
+		dev_err(&pdev->dev, "cannot get dma clock\n");
+		return PTR_ERR(i2c->clk_dma);
+	}
+
+	i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
+	if (IS_ERR(i2c->clk_arb))
+		i2c->clk_arb = NULL;
+
+	clk = i2c->clk_main;
+	if (i2c->have_pmic) {
+		i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
+		if (IS_ERR(i2c->clk_pmic)) {
+			dev_err(&pdev->dev, "cannot get pmic clock\n");
+			return PTR_ERR(i2c->clk_pmic);
+		}
+		clk = i2c->clk_pmic;
+	}
+
+	strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
+
+	ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set the speed.\n");
+		return -EINVAL;
+	}
+
+	if (i2c->dev_comp->support_33bits) {
+		ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+		if (ret) {
+			dev_err(&pdev->dev, "dma_set_mask return error.\n");
+			return ret;
+		}
+	}
+
+	ret = mtk_i2c_clock_enable(i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "clock enable failed!\n");
+		return ret;
+	}
+	mtk_i2c_init_hw(i2c);
+	mtk_i2c_clock_disable(i2c);
+
+	ret = devm_request_irq(&pdev->dev, irq, mtk_i2c_irq,
+			       IRQF_TRIGGER_NONE, I2C_DRV_NAME, i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Request I2C IRQ %d fail\n", irq);
+		return ret;
+	}
+
+	i2c_set_adapdata(&i2c->adap, i2c);
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, i2c);
+
+	return 0;
+}
+
+static int mtk_i2c_remove(struct platform_device *pdev)
+{
+	struct mtk_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_i2c_resume(struct device *dev)
+{
+	int ret;
+	struct mtk_i2c *i2c = dev_get_drvdata(dev);
+
+	ret = mtk_i2c_clock_enable(i2c);
+	if (ret) {
+		dev_dbg(dev, "clock enable failed!\n");
+		return ret;
+	}
+
+	mtk_i2c_init_hw(i2c);
+
+	mtk_i2c_clock_disable(i2c);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops mtk_i2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, mtk_i2c_resume)
+};
+
+static struct platform_driver mtk_i2c_driver = {
+	.probe = mtk_i2c_probe,
+	.remove = mtk_i2c_remove,
+	.driver = {
+		.name = I2C_DRV_NAME,
+		.pm = &mtk_i2c_pm,
+		.of_match_table = of_match_ptr(mtk_i2c_of_match),
+	},
+};
+
+module_platform_driver(mtk_i2c_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MediaTek I2C Bus Driver");
+MODULE_AUTHOR("Xudong Chen <xudong.chen@mediatek.com>");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.c
new file mode 100644
index 0000000..d2cbe2a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.c
@@ -0,0 +1,2042 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Xudong.chen <xudong.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#if 0
+#include <mtk_cpufreq_hybrid.h>
+#endif
+#ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT
+#include <mtk_kbase_spm.h>
+#endif
+#ifdef CONFIG_MTK_TINYSYS_SCP_SUPPORT
+#include <scp_helper.h>
+#endif
+#include "mtk_secure_api.h"
+#include "i2c-mtk.h"
+
+static struct i2c_dma_info g_dma_regs[I2C_MAX_CHANNEL];
+static struct mt_i2c *g_mt_i2c[I2C_MAX_CHANNEL];
+static struct mtk_i2c_compatible i2c_common_compat;
+
+
+static inline void _i2c_writew(u16 value, struct mt_i2c *i2c, u16 offset)
+{
+	writew(value, i2c->base + offset);
+}
+
+static inline u16 _i2c_readw(struct mt_i2c *i2c, u16 offset)
+{
+	return readw(i2c->base + offset);
+}
+
+#define raw_i2c_writew(val, i2c, ch_ofs, ofs) \
+	do { \
+		if (((i2c)->dev_comp->ver != 0x2) || (V2_##ofs != 0xfff)) \
+			_i2c_writew(val, i2c, ch_ofs + \
+				    (((i2c)->dev_comp->ver == 0x2) ? \
+				    (V2_##ofs) : ofs)); \
+	} while (0)
+
+#define raw_i2c_readw(i2c, ch_ofs, ofs) \
+	({ \
+		u16 value = 0; \
+		if (((i2c)->dev_comp->ver != 0x2) || (V2_##ofs != 0xfff)) \
+			value = _i2c_readw(i2c, ch_ofs + \
+					   (((i2c)->dev_comp->ver == 0x2) ? \
+					   (V2_##ofs) : ofs)); \
+		value; \
+	})
+
+#define i2c_writew(val, i2c, ofs) raw_i2c_writew(val, i2c, i2c->ch_offset, ofs)
+
+#define i2c_readw(i2c, ofs) raw_i2c_readw(i2c, i2c->ch_offset, ofs)
+
+#define i2c_writew_shadow(val, i2c, ofs) raw_i2c_writew(val, i2c, 0, ofs)
+
+#define i2c_readw_shadow(i2c, ofs) raw_i2c_readw(i2c, 0, ofs)
+
+void __iomem *cg_base;
+
+s32 map_cg_regs(struct mt_i2c *i2c)
+{
+	struct device_node *cg_node;
+	int ret = -1;
+
+	if (!cg_base && i2c->dev_comp->clk_compatible[0]) {
+		cg_node = of_find_compatible_node(NULL, NULL,
+			i2c->dev_comp->clk_compatible);
+		if (!cg_node) {
+			pr_info("Cannot find cg_node\n");
+			return -ENODEV;
+		}
+		cg_base = of_iomap(cg_node, 0);
+		if (!cg_base) {
+			pr_info("cg_base iomap failed\n");
+			return -ENOMEM;
+		}
+		ret = 0;
+	}
+
+	return ret;
+}
+
+void dump_cg_regs(struct mt_i2c *i2c)
+{
+	u32 clk_sta_val, clk_sta_offs, cg_bit;
+	u32 clk_sel_val, arbit_val, clk_sel_offs, arbit_offs;
+
+	if (!cg_base || i2c->id >= I2C_MAX_CHANNEL) {
+		pr_info("cg_base %p, i2c id = %d\n", cg_base, i2c->id);
+		return;
+	}
+
+	clk_sta_offs = i2c->clk_sta_offset;
+	clk_sta_val = readl(cg_base + clk_sta_offs);
+	cg_bit = i2c->cg_bit;
+
+	pr_info("[I2C] cg regs dump:\n"
+		"name %s, offset 0x%x: value = 0x%08x, bit %d, clock %s\n",
+		i2c->dev_comp->clk_compatible,
+		clk_sta_offs, clk_sta_val, cg_bit,
+		clk_sta_val & (1 << cg_bit) ? "off":"on");
+
+	/* Dump clk source & arbit bit */
+	clk_sel_offs = i2c->dev_comp->clk_sel_offset;
+	clk_sel_val = readl(cg_base + clk_sel_offs);
+	arbit_offs = i2c->dev_comp->arbit_offset;
+	arbit_val = readl(cg_base + arbit_offs);
+	pr_info("[I2C] clk src & arbit dump:\n"
+		"name: %s, clk_sel_offs: 0x%x, val=0x%08x, arbit_offs: 0x%x, val=0x%08x\n",
+			i2c->dev_comp->clk_compatible,
+			clk_sel_offs, clk_sel_val,
+			arbit_offs, arbit_val);
+}
+
+void __iomem *dma_base;
+
+s32 map_dma_regs(void)
+{
+	struct device_node *dma_node;
+
+	dma_node = of_find_compatible_node(NULL, NULL, "mediatek,ap_dma");
+	if (!dma_node) {
+		pr_info("Cannot find dma_node\n");
+		return -ENODEV;
+	}
+	dma_base = of_iomap(dma_node, 0);
+	if (!dma_base) {
+		pr_info("dma_base iomap failed\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+void dump_dma_regs(void)
+{
+	int status;
+	int i;
+
+	if (!dma_base) {
+		pr_info("dma_base NULL\n");
+		return;
+	}
+
+	status =  readl(dma_base + 8);
+	pr_info("DMA RUNNING STATUS : 0x%x .\n", status);
+	for (i = 0; i < 21 ; i++) {
+		if (status & (0x1 << i))
+			pr_info("DMA[%d] CONTROL REG : 0x%x, DEBUG : 0x%x .\n",
+				i,
+				readl(dma_base + 0x80 + 0x80 * i + 0x18),
+				readl(dma_base + 0x80 + 0x80 * i + 0x50));
+	}
+
+}
+
+static inline void i2c_writel_dma(u32 value, struct mt_i2c *i2c, u8 offset)
+{
+	writel(value, i2c->pdmabase + i2c->ch_offset_dma + offset);
+}
+
+static inline u32 i2c_readl_dma(struct mt_i2c *i2c, u8 offset)
+{
+	return readl(i2c->pdmabase + i2c->ch_offset_dma + offset);
+}
+
+static void record_i2c_dma_info(struct mt_i2c *i2c)
+{
+	g_dma_regs[i2c->id].base =
+		(unsigned long)i2c->pdmabase;
+	g_dma_regs[i2c->id].int_flag =
+		i2c_readl_dma(i2c, OFFSET_INT_FLAG);
+	g_dma_regs[i2c->id].int_en =
+		i2c_readl_dma(i2c, OFFSET_INT_EN);
+	g_dma_regs[i2c->id].en =
+		i2c_readl_dma(i2c, OFFSET_EN);
+	g_dma_regs[i2c->id].rst =
+		i2c_readl_dma(i2c, OFFSET_RST);
+	g_dma_regs[i2c->id].stop =
+		i2c_readl_dma(i2c, OFFSET_STOP);
+	g_dma_regs[i2c->id].flush =
+		i2c_readl_dma(i2c, OFFSET_FLUSH);
+	g_dma_regs[i2c->id].con =
+		i2c_readl_dma(i2c, OFFSET_CON);
+	g_dma_regs[i2c->id].tx_mem_addr =
+		i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR);
+	g_dma_regs[i2c->id].rx_mem_addr =
+		i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR);
+	g_dma_regs[i2c->id].tx_len =
+		i2c_readl_dma(i2c, OFFSET_TX_LEN);
+	g_dma_regs[i2c->id].rx_len =
+		i2c_readl_dma(i2c, OFFSET_RX_LEN);
+	g_dma_regs[i2c->id].int_buf_size =
+		i2c_readl_dma(i2c, OFFSET_INT_BUF_SIZE);
+	g_dma_regs[i2c->id].debug_sta =
+		i2c_readl_dma(i2c, OFFSET_DEBUG_STA);
+	g_dma_regs[i2c->id].tx_mem_addr2 =
+		i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR2);
+	g_dma_regs[i2c->id].rx_mem_addr2 =
+		i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR2);
+}
+
+static void record_i2c_info(struct mt_i2c *i2c, int tmo)
+{
+	int idx = i2c->rec_idx;
+
+	i2c->rec_info[idx].slave_addr = i2c_readw(i2c, OFFSET_SLAVE_ADDR);
+	i2c->rec_info[idx].intr_stat = i2c->irq_stat;
+	i2c->rec_info[idx].control = i2c_readw(i2c, OFFSET_CONTROL);
+	i2c->rec_info[idx].fifo_stat = i2c_readw(i2c, OFFSET_FIFO_STAT);
+	i2c->rec_info[idx].debug_stat = i2c_readw(i2c, OFFSET_DEBUGSTAT);
+	i2c->rec_info[idx].tmo = tmo;
+	i2c->rec_info[idx].end_time = sched_clock();
+
+	i2c->rec_idx++;
+	if (i2c->rec_idx == I2C_RECORD_LEN)
+		i2c->rec_idx = 0;
+}
+
+static void dump_i2c_info(struct mt_i2c *i2c)
+{
+	int i;
+	int idx = i2c->rec_idx;
+	unsigned long long endtime;
+	unsigned long ns;
+
+	if (i2c->buffermode) /* no i2c history @ buffermode */
+		return;
+
+	dev_info(i2c->dev, "last transfer info:\n");
+
+	for (i = 0; i < I2C_RECORD_LEN; i++) {
+		if (idx == 0)
+			idx = I2C_RECORD_LEN;
+		idx--;
+		endtime = i2c->rec_info[idx].end_time;
+		ns = do_div(endtime, 1000000000);
+		dev_info(i2c->dev,
+			"[%02d] [%5lu.%06lu] SLAVE_ADDR=%x,INTR_STAT=%x,CONTROL=%x,FIFO_STAT=%x,DEBUGSTAT=%x, tmo=%d\n",
+			i,
+			(unsigned long)endtime,
+			ns/1000,
+			i2c->rec_info[idx].slave_addr,
+			i2c->rec_info[idx].intr_stat,
+			i2c->rec_info[idx].control,
+			i2c->rec_info[idx].fifo_stat,
+			i2c->rec_info[idx].debug_stat,
+			i2c->rec_info[idx].tmo
+		);
+	}
+}
+
+static int mt_i2c_clock_enable(struct mt_i2c *i2c)
+{
+#if !defined(CONFIG_MT_I2C_FPGA_ENABLE)
+	int ret = 0;
+
+	ret = clk_prepare_enable(i2c->clk_dma);
+	if (ret)
+		return ret;
+
+	if (i2c->clk_pal != NULL) {
+		ret = clk_prepare_enable(i2c->clk_pal);
+		if (ret)
+			goto err_main;
+	}
+
+	if (i2c->clk_arb != NULL) {
+		ret = clk_prepare_enable(i2c->clk_arb);
+		if (ret)
+			return ret;
+	}
+	ret = clk_prepare_enable(i2c->clk_main);
+	if (ret)
+		goto err_main;
+
+	if (i2c->have_pmic) {
+		ret = clk_prepare_enable(i2c->clk_pmic);
+		if (ret)
+			goto err_pmic;
+	}
+	spin_lock(&i2c->cg_lock);
+	if (i2c->suspended)
+		ret = -EIO;
+	else
+		i2c->cg_cnt++;
+	spin_unlock(&i2c->cg_lock);
+	if (ret) {
+		dev_info(i2c->dev, "err, access at suspend no irq stage\n");
+		goto err_cg;
+	}
+
+	return 0;
+
+err_cg:
+	if (i2c->have_pmic)
+		clk_disable_unprepare(i2c->clk_pmic);
+err_pmic:
+	clk_disable_unprepare(i2c->clk_main);
+err_main:
+	if (i2c->clk_arb)
+		clk_disable_unprepare(i2c->clk_arb);
+	clk_disable_unprepare(i2c->clk_dma);
+	return ret;
+#else
+	return 0;
+#endif
+}
+
+static void mt_i2c_clock_disable(struct mt_i2c *i2c)
+{
+#if !defined(CONFIG_MT_I2C_FPGA_ENABLE)
+	if (i2c->have_pmic)
+		clk_disable_unprepare(i2c->clk_pmic);
+
+	clk_disable_unprepare(i2c->clk_main);
+	if (i2c->clk_pal != NULL)
+		clk_disable_unprepare(i2c->clk_pal);
+
+	if (i2c->clk_arb != NULL)
+		clk_disable_unprepare(i2c->clk_arb);
+
+	clk_disable_unprepare(i2c->clk_dma);
+	spin_lock(&i2c->cg_lock);
+	i2c->cg_cnt--;
+	spin_unlock(&i2c->cg_lock);
+#endif
+}
+
+static int i2c_get_semaphore(struct mt_i2c *i2c)
+{
+#if 0
+	int count = 100;
+#endif
+	#if 0
+	if (i2c->appm) {
+		if (cpuhvfs_get_dvfsp_semaphore(SEMA_I2C_DRV) != 0) {
+			dev_info(i2c->dev, "sema time out 2ms\n");
+			if (cpuhvfs_get_dvfsp_semaphore(SEMA_I2C_DRV) != 0) {
+				dev_info(i2c->dev, "sema time out 4ms\n");
+				i2c_dump_info(i2c);
+				WARN_ON(1);
+				return -EBUSY;
+			}
+		}
+	}
+	#endif
+
+#ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT
+	if (i2c->gpupm) {
+		if (dvfs_gpu_pm_spin_lock_for_vgpu() != 0) {
+			dev_info(i2c->dev, "sema time out.\n");
+			return -EBUSY;
+		}
+	}
+#endif
+
+	switch (i2c->id) {
+#if 0
+	case 0:
+		while ((get_scp_semaphore(SEMAPHORE_I2C0) != 1) && count > 0)
+			count--;
+		return count > 0 ? 0 : -EBUSY;
+	case 1:
+		while ((get_scp_semaphore(SEMAPHORE_I2C1) != 1) && count > 0)
+			count--;
+		return count > 0 ? 0 : -EBUSY;
+#endif
+	default:
+		return 0;
+	}
+}
+
+static int i2c_release_semaphore(struct mt_i2c *i2c)
+{
+	#if 0
+	if (i2c->appm)
+		cpuhvfs_release_dvfsp_semaphore(SEMA_I2C_DRV);
+	#endif
+#ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT
+	if (i2c->gpupm)
+		dvfs_gpu_pm_spin_unlock_for_vgpu();
+#endif
+
+	switch (i2c->id) {
+#if 0
+	case 0:
+		return release_scp_semaphore(SEMAPHORE_I2C0) == 1 ? 0 : -EBUSY;
+	case 1:
+		return release_scp_semaphore(SEMAPHORE_I2C1) == 1 ? 0 : -EBUSY;
+#endif
+	default:
+		return 0;
+	}
+}
+static void free_i2c_dma_bufs(struct mt_i2c *i2c)
+{
+	dma_free_coherent(i2c->adap.dev.parent, PAGE_SIZE,
+		i2c->dma_buf.vaddr, i2c->dma_buf.paddr);
+}
+
+static inline void mt_i2c_wait_done(struct mt_i2c *i2c, u16 ch_off)
+{
+	u16 start, tmo;
+
+	start = raw_i2c_readw(i2c, ch_off, OFFSET_START) & I2C_TRANSAC_START;
+	if (start) {
+		dev_info(i2c->dev, "wait transfer done before cg off.\n");
+
+		tmo = 100;
+		do {
+			msleep(20);
+			start = raw_i2c_readw(i2c, ch_off, OFFSET_START) &
+				I2C_TRANSAC_START;
+			tmo--;
+		} while (start && tmo);
+
+		if (start && !tmo) {
+			dev_info(i2c->dev, "wait transfer timeout.\n");
+			i2c_dump_info(i2c);
+		}
+	}
+}
+
+static inline void mt_i2c_init_hw(struct mt_i2c *i2c)
+{
+	/* clear interrupt status */
+	i2c_writew_shadow(0, i2c, OFFSET_INTR_MASK);
+	i2c->irq_stat = i2c_readw_shadow(i2c, OFFSET_INTR_STAT);
+	i2c_writew_shadow(i2c->irq_stat, i2c, OFFSET_INTR_STAT);
+
+	i2c_writew_shadow(I2C_SOFT_RST, i2c, OFFSET_SOFTRESET);
+	/* Set ioconfig */
+	if (i2c->use_push_pull)
+		i2c_writew_shadow(I2C_IO_CONFIG_PUSH_PULL,
+			i2c, OFFSET_IO_CONFIG);
+	else
+		i2c_writew_shadow(I2C_IO_CONFIG_OPEN_DRAIN,
+			i2c, OFFSET_IO_CONFIG);
+	if (i2c->have_dcm)
+		i2c_writew_shadow(I2C_DCM_DISABLE, i2c, OFFSET_DCM_EN);
+
+	if (i2c->dev_comp->ver != 0x2)
+		i2c_writew_shadow(i2c->timing_reg, i2c, OFFSET_TIMING);
+	else
+		i2c_writew_shadow(i2c->timing_reg | I2C_TIMEOUT_EN, i2c,
+			   OFFSET_TIMING);
+
+	if (i2c->dev_comp->set_ltiming)
+		i2c_writew_shadow(i2c->ltiming_reg, i2c, OFFSET_LTIMING);
+	i2c_writew_shadow(i2c->high_speed_reg, i2c, OFFSET_HS);
+	/* DMA warm reset, and waits for EN to become 0 */
+	i2c_writel_dma(I2C_DMA_WARM_RST, i2c, OFFSET_RST);
+	udelay(5);
+	if (i2c_readl_dma(i2c, OFFSET_EN) != 0) {
+		dev_info(i2c->dev, "DMA bus hang .\n");
+		dump_dma_regs();
+		WARN_ON(1);
+	}
+}
+
+/* calculate i2c port speed */
+static int mtk_i2c_calculate_speed(struct mt_i2c *i2c,
+	unsigned int clk_src_in_hz,
+	unsigned int speed_hz,
+	unsigned int *timing_step_cnt,
+	unsigned int *timing_sample_cnt)
+{
+	unsigned int khz;
+	unsigned int step_cnt;
+	unsigned int sample_cnt;
+	unsigned int sclk;
+	unsigned int hclk;
+	unsigned int max_step_cnt;
+	unsigned int sample_div = MAX_SAMPLE_CNT_DIV;
+	unsigned int step_div;
+	unsigned int min_div;
+	unsigned int best_mul;
+	unsigned int cnt_mul;
+
+	if (speed_hz > MAX_HS_MODE_SPEED) {
+		if (i2c->dev_comp->check_max_freq)
+			return -EINVAL;
+		max_step_cnt = MAX_HS_STEP_CNT_DIV;
+	} else if (speed_hz > MAX_FS_MODE_SPEED) {
+		max_step_cnt = MAX_HS_STEP_CNT_DIV;
+	} else {
+		max_step_cnt = MAX_STEP_CNT_DIV;
+	}
+	step_div = max_step_cnt;
+
+	/* Find the best combination */
+	khz = speed_hz / 1000;
+	hclk = clk_src_in_hz / 1000;
+	min_div = ((hclk >> 1) + khz - 1) / khz;
+	best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
+	for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) {
+		step_cnt = (min_div + sample_cnt - 1) / sample_cnt;
+		cnt_mul = step_cnt * sample_cnt;
+		if (step_cnt > max_step_cnt)
+			continue;
+		if (cnt_mul < best_mul) {
+			best_mul = cnt_mul;
+			sample_div = sample_cnt;
+			step_div = step_cnt;
+			if (best_mul == min_div)
+				break;
+		}
+	}
+	sample_cnt = sample_div;
+	step_cnt = step_div;
+	sclk = hclk / (2 * sample_cnt * step_cnt);
+	if (sclk > khz) {
+		dev_dbg(i2c->dev, "%s mode: unsupported speed (%ldkhz)\n",
+			(speed_hz > MAX_FS_MODE_SPEED) ? "HS" : "ST/FT",
+			(long int)khz);
+		return -ENOTSUPP;
+	}
+
+	if (i2c->dev_comp->cnt_constraint) {
+		if (--sample_cnt) {/* --sample_cnt = 0, setp_cnt needn't -1  */
+			step_cnt--;
+		}
+	} else {
+		sample_cnt--;
+		step_cnt--;
+	}
+
+	*timing_step_cnt = step_cnt;
+	*timing_sample_cnt = sample_cnt;
+
+	return 0;
+}
+
+static int i2c_set_speed(struct mt_i2c *i2c, unsigned int clk_src_in_hz)
+{
+	int ret;
+	unsigned int step_cnt;
+	unsigned int sample_cnt;
+	unsigned int l_step_cnt;
+	unsigned int l_sample_cnt;
+	unsigned int speed_hz;
+	unsigned int duty = HALF_DUTY_CYCLE;
+
+	if (i2c->ext_data.isEnable && i2c->ext_data.timing)
+		speed_hz = i2c->ext_data.timing;
+	else
+		speed_hz = i2c->speed_hz;
+
+	if (speed_hz > MAX_FS_PLUS_MODE_SPEED && !i2c->hs_only) {
+		/* Set the hign speed mode register */
+		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz,
+			MAX_FS_MODE_SPEED, &l_step_cnt, &l_sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz,
+			speed_hz, &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->high_speed_reg = I2C_HS_HOLD_TIME |
+			I2C_TIME_DEFAULT_VALUE | I2C_HS_SPEED |
+			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 12 |
+			((step_cnt - 1) & I2C_TIMING_SAMPLE_COUNT_MASK) << 8;
+
+		i2c->timing_reg =
+			(l_sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8 |
+			(l_step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0;
+
+		if (i2c->dev_comp->set_ltiming) {
+			i2c->ltiming_reg = I2C_HS_HOLD_SEL | (l_sample_cnt << 6)
+				| (l_step_cnt << 0) |
+				(sample_cnt &
+				I2C_TIMING_SAMPLE_COUNT_MASK) << 12 |
+				((step_cnt + 1) &
+				I2C_TIMING_SAMPLE_COUNT_MASK) << 9;
+		}
+	} else {
+		if (speed_hz > I2C_DEFAUT_SPEED
+			&& speed_hz <= MAX_FS_MODE_SPEED
+			&& i2c->dev_comp->set_ltiming)
+			duty = DUTY_CYCLE;
+
+		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz,
+			(speed_hz * 50 / duty), &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->timing_reg =
+			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8 |
+			(step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0;
+
+		if (i2c->dev_comp->set_ltiming) {
+			ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz,
+				(speed_hz * 50 / (100 - duty)),
+				&l_step_cnt, &l_sample_cnt);
+			if (ret < 0)
+				return ret;
+
+			i2c->ltiming_reg =
+				(l_sample_cnt &
+					I2C_TIMING_SAMPLE_COUNT_MASK) << 6 |
+				(l_step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0;
+		}
+		/* Disable the high speed transaction */
+		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+	}
+
+	return 0;
+}
+
+
+#ifdef I2C_DEBUG_FS
+void i2c_dump_info1(struct mt_i2c *i2c)
+{
+	if (i2c->ext_data.isEnable && i2c->ext_data.timing)
+		dev_info(i2c->dev, "I2C structure:\nspeed %d\n",
+			i2c->ext_data.timing);
+	else
+		dev_info(i2c->dev, "I2C structure:\nspeed %d\n",
+			i2c->speed_hz);
+	dev_info(i2c->dev, "I2C structure:\nOp %x\n", i2c->op);
+	dev_info(i2c->dev,
+		"I2C structure:\nData_size %x\nIrq_stat %x\nTrans_stop %d\n",
+		i2c->msg_len, i2c->irq_stat, i2c->trans_stop);
+	dev_info(i2c->dev, "base address %p\n", i2c->base);
+	dev_info(i2c->dev,
+		"I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\n",
+		(i2c_readw(i2c, OFFSET_SLAVE_ADDR)),
+		(i2c_readw(i2c, OFFSET_INTR_MASK)));
+	dev_info(i2c->dev,
+		"I2C register:\nINTR_STAT %x\nCONTROL %x\n",
+		(i2c_readw(i2c, OFFSET_INTR_STAT)),
+		(i2c_readw(i2c, OFFSET_CONTROL)));
+	dev_info(i2c->dev,
+		"I2C register:\nTRANSFER_LEN %x\nTRANSAC_LEN %x\n",
+		(i2c_readw(i2c, OFFSET_TRANSFER_LEN)),
+		(i2c_readw(i2c, OFFSET_TRANSAC_LEN)));
+	dev_info(i2c->dev,
+		"I2C register:\nDELAY_LEN %x\nTIMING %x\n",
+		(i2c_readw(i2c, OFFSET_DELAY_LEN)),
+		(i2c_readw(i2c, OFFSET_TIMING)));
+	dev_info(i2c->dev,
+		"I2C register:\nSTART %x\nFIFO_STAT %x\n",
+		(i2c_readw(i2c, OFFSET_START)),
+		(i2c_readw(i2c, OFFSET_FIFO_STAT)));
+	dev_info(i2c->dev,
+		"I2C register:\nIO_CONFIG %x\nHS %x\n",
+		(i2c_readw(i2c, OFFSET_IO_CONFIG)),
+		(i2c_readw(i2c, OFFSET_HS)));
+	dev_info(i2c->dev,
+		"I2C register:\nDEBUGSTAT %x\nEXT_CONF %x\nPATH_DIR %x\n",
+		(i2c_readw(i2c, OFFSET_DEBUGSTAT)),
+		(i2c_readw(i2c, OFFSET_EXT_CONF)),
+		(i2c_readw(i2c, OFFSET_PATH_DIR)));
+}
+
+void i2c_dump_info(struct mt_i2c *i2c)
+{
+	/* I2CFUC(); */
+	/* int val=0; */
+	pr_info_ratelimited("%s: +++++++++++++++++++\n", __func__);
+	pr_info_ratelimited("I2C structure:\n"
+	       I2CTAG "Clk=%ld,Id=%d,Op=0x%x,Irq_stat=0x%x,Total_len=0x%x\n"
+	       I2CTAG "Trans_len=0x%x,Trans_num=0x%x,Trans_auxlen=0x%x,\n"
+	       I2CTAG "speed=%d,Trans_stop=%u,cg_cnt=%d,hs_only=%d,\n"
+	       I2CTAG "ch_offset=0x%x,ch_offset_default=0x%x\n",
+	       i2c->main_clk, i2c->id, i2c->op, i2c->irq_stat, i2c->total_len,
+			i2c->msg_len, 1, i2c->msg_aux_len, i2c->speed_hz,
+			i2c->trans_stop, i2c->cg_cnt,
+			i2c->hs_only, i2c->ch_offset, i2c->ch_offset_default);
+
+	pr_info_ratelimited("base addr:0x%p\n", i2c->base);
+	pr_info_ratelimited("I2C register:\n"
+	       I2CTAG "SLAVE_ADDR=0x%x,INTR_MASK=0x%x,INTR_STAT=0x%x,\n"
+	       I2CTAG "CONTROL=0x%x,TRANSFER_LEN=0x%x,TRANSAC_LEN=0x%x,\n"
+	       I2CTAG "DELAY_LEN=0x%x,TIMING=0x%x,LTIMING=0x%x,START=0x%x\n"
+	       I2CTAG "FIFO_STAT=0x%x,IO_CONFIG=0x%x,HS=0x%x\n"
+	       I2CTAG "DCM_EN=0x%x,DEBUGSTAT=0x%x,EXT_CONF=0x%x\n"
+	       I2CTAG "TRANSFER_LEN_AUX=0x%x,OFFSET_DMA_FSM_DEBUG=0x%x\n"
+	       I2CTAG "OFFSET_MCU_INTR=0x%x,OFFSET_CLOCK_DIV=0x%x\n",
+	       (i2c_readw(i2c, OFFSET_SLAVE_ADDR)),
+	       (i2c_readw(i2c, OFFSET_INTR_MASK)),
+	       (i2c_readw(i2c, OFFSET_INTR_STAT)),
+	       (i2c_readw(i2c, OFFSET_CONTROL)),
+	       (i2c_readw(i2c, OFFSET_TRANSFER_LEN)),
+	       (i2c_readw(i2c, OFFSET_TRANSAC_LEN)),
+	       (i2c_readw(i2c, OFFSET_DELAY_LEN)),
+	       (i2c_readw(i2c, OFFSET_TIMING)),
+	       (i2c_readw(i2c, OFFSET_LTIMING)),
+	       (i2c_readw(i2c, OFFSET_START)),
+	       (i2c_readw(i2c, OFFSET_FIFO_STAT)),
+	       (i2c_readw(i2c, OFFSET_IO_CONFIG)),
+	       (i2c_readw(i2c, OFFSET_HS)),
+	       (i2c_readw(i2c, OFFSET_DCM_EN)),
+	       (i2c_readw(i2c, OFFSET_DEBUGSTAT)),
+	       (i2c_readw(i2c, OFFSET_EXT_CONF)),
+	       (i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX)),
+	       (i2c_readw(i2c, OFFSET_DMA_FSM_DEBUG)),
+	       (i2c_readw(i2c, OFFSET_MCU_INTR)),
+	       (i2c_readw(i2c, OFFSET_CLOCK_DIV)));
+
+	pr_info_ratelimited("before enable DMA register(0x%lx):\n"
+	       I2CTAG "INT_FLAG=0x%x,INT_EN=0x%x,EN=0x%x,RST=0x%x,\n"
+	       I2CTAG "STOP=0x%x,FLUSH=0x%x,CON=0x%x,\n"
+	       I2CTAG "TX_MEM_ADDR=0x%x, RX_MEM_ADDR=0x%x\n"
+	       I2CTAG "TX_LEN=0x%x,RX_LEN=0x%x,INT_BUF_SIZE=0x%x,\n"
+	       I2CTAG "DEBUGSTA=0x%x,TX_MEM_ADDR2=0x%x, RX_MEM_ADDR2=0x%x\n",
+	       g_dma_regs[i2c->id].base,
+	       g_dma_regs[i2c->id].int_flag,
+	       g_dma_regs[i2c->id].int_en,
+	       g_dma_regs[i2c->id].en,
+	       g_dma_regs[i2c->id].rst,
+	       g_dma_regs[i2c->id].stop,
+	       g_dma_regs[i2c->id].flush,
+	       g_dma_regs[i2c->id].con,
+	       g_dma_regs[i2c->id].tx_mem_addr,
+	       g_dma_regs[i2c->id].rx_mem_addr,
+	       g_dma_regs[i2c->id].tx_len,
+	       g_dma_regs[i2c->id].rx_len,
+	       g_dma_regs[i2c->id].int_buf_size, g_dma_regs[i2c->id].debug_sta,
+	       g_dma_regs[i2c->id].tx_mem_addr2,
+	       g_dma_regs[i2c->id].rx_mem_addr2);
+	pr_info_ratelimited("DMA register(0x%p):\n"
+	       I2CTAG "INT_FLAG=0x%x,INT_EN=0x%x,EN=0x%x,RST=0x%x,\n"
+	       I2CTAG "STOP=0x%x,FLUSH=0x%x,CON=0x%x,\n"
+	       I2CTAG "TX_MEM_ADDR=0x%x, RX_MEM_ADDR=0x%x,\n"
+	       I2CTAG "TX_LEN=0x%x,RX_LEN=x%x,INT_BUF_SIZE=0x%x,\n"
+	       I2CTAG "DEBUGSTA=0x%x,TX_MEM_ADDR2=0x%x, RX_MEM_ADDR2=0x%x\n",
+	       i2c->pdmabase,
+	       (i2c_readl_dma(i2c, OFFSET_INT_FLAG)),
+	       (i2c_readl_dma(i2c, OFFSET_INT_EN)),
+	       (i2c_readl_dma(i2c, OFFSET_EN)),
+	       (i2c_readl_dma(i2c, OFFSET_RST)),
+	       (i2c_readl_dma(i2c, OFFSET_STOP)),
+	       (i2c_readl_dma(i2c, OFFSET_FLUSH)),
+	       (i2c_readl_dma(i2c, OFFSET_CON)),
+	       (i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR)),
+	       (i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR)),
+	       (i2c_readl_dma(i2c, OFFSET_TX_LEN)),
+	       (i2c_readl_dma(i2c, OFFSET_RX_LEN)),
+	       (i2c_readl_dma(i2c, OFFSET_INT_BUF_SIZE)),
+	       (i2c_readl_dma(i2c, OFFSET_DEBUG_STA)),
+	       (i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR2)),
+	       (i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR2)));
+	pr_info_ratelimited("%s: -----------------------\n", __func__);
+
+	dump_i2c_info(i2c);
+	if (i2c->ccu_offset) {
+		dev_info(i2c->dev, "I2C CCU register:\n"
+		I2CTAG "SLAVE_ADDR=0x%x,INTR_MASK=0x%x,\n"
+		I2CTAG "INTR_STAT=0x%x,CONTROL=0x%x,\n"
+		I2CTAG "TRANSFER_LEN=0x%x, TRANSAC_LEN=0x%x,DELAY_LEN=0x%x\n"
+		I2CTAG "TIMING=0x%x,LTIMING=0x%x,START=0x%x,FIFO_STAT=0x%x,\n"
+		I2CTAG "IO_CONFIG=0x%x,HS=0x%x,DCM_EN=0x%x,DEBUGSTAT=0x%x,\n"
+		I2CTAG "EXT_CONF=0x%x,TRANSFER_LEN_AUX=0x%x\n"
+		I2CTAG "OFFSET_DMA_FSM_DEBUG=0x%x,OFFSET_MCU_INTR=0x%x\n",
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_SLAVE_ADDR)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_INTR_MASK)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_INTR_STAT)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_CONTROL)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSFER_LEN)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSAC_LEN)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DELAY_LEN)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TIMING)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_LTIMING)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_START)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_FIFO_STAT)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_IO_CONFIG)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_HS)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DCM_EN)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DEBUGSTAT)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_EXT_CONF)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSFER_LEN_AUX)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DMA_FSM_DEBUG)),
+		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_MCU_INTR)));
+	}
+}
+#else
+void i2c_dump_info(struct mt_i2c *i2c)
+{
+}
+#endif
+
+void i2c_gpio_dump_info(struct mt_i2c *i2c)
+{
+	if (i2c->gpiobase) {
+		dev_info(i2c->dev, "%s +++++++++++++++++++\n", __func__);
+		/* gpio_dump_regs_range(i2c->scl_gpio_id, i2c->sda_gpio_id); */
+		dev_info(i2c->dev, "I2C gpio structure:\n"
+		       I2CTAG "EH_CFG=0x%x,PU_CFG=0x%x,RSEL_CFG=0x%x\n",
+		       readl(i2c->gpiobase + i2c->offset_eh_cfg),
+		       readl(i2c->gpiobase + i2c->offset_pu_cfg),
+		       readl(i2c->gpiobase + i2c->offset_rsel_cfg));
+	} else
+		dev_info(i2c->dev, "i2c gpiobase is NULL\n");
+}
+
+void dump_i2c_status(int id)
+{
+	if (id >= I2C_MAX_CHANNEL) {
+		pr_info("error %s, id = %d\n", __func__, id);
+		return;
+	}
+
+	if (!g_mt_i2c[id]) {
+		pr_info("error %s, g_mt_i2c[%d] == NULL\n", __func__, id);
+		return;
+	}
+
+	dump_cg_regs(g_mt_i2c[id]);
+	(void)mt_i2c_clock_enable(g_mt_i2c[id]);
+	i2c_dump_info(g_mt_i2c[id]);
+	mt_i2c_clock_disable(g_mt_i2c[id]);
+}
+EXPORT_SYMBOL(dump_i2c_status);
+
+static int mt_i2c_do_transfer(struct mt_i2c *i2c)
+{
+	u16 addr_reg = 0;
+	u16 control_reg = 0;
+	u16 ioconfig_reg = 0;
+	u16 start_reg = 0;
+	u16 int_reg = 0;
+	int tmo = i2c->adap.timeout;
+	unsigned int speed_hz = 0;
+	bool isDMA = false;
+	int data_size = 0;
+	u8 *ptr;
+	int ret = 0;
+	/* u16 ch_offset; */
+
+	i2c->trans_stop = false;
+	i2c->irq_stat = 0;
+	if (i2c->total_len > 8 || i2c->msg_aux_len > 8)
+		isDMA = true;
+	if (i2c->ext_data.isEnable && i2c->ext_data.timing)
+		speed_hz = i2c->ext_data.timing;
+	else
+		speed_hz = i2c->speed_hz;
+	if (i2c->ext_data.is_ch_offset) {
+		i2c->ch_offset = i2c->ext_data.ch_offset;
+		i2c->ch_offset_dma = i2c->ext_data.ch_offset_dma;
+		if (i2c->ext_data.ch_offset == 0) {
+			dev_info(i2c->dev, "Wrong channel offset for multi-channel\n");
+			i2c->ch_offset = i2c->ccu_offset;
+		}
+	} else {
+		i2c->ch_offset = i2c->ch_offset_default;
+		i2c->ch_offset_dma = i2c->ch_offset_dma_default;
+	}
+
+#if defined(CONFIG_ARCH_MT6765)
+	i2c_writel(i2c, OFFSET_DEBUGCTRL, 0x28);
+#endif
+#if !defined(CONFIG_MT_I2C_FPGA_ENABLE)
+	ret = i2c_set_speed(i2c,
+		clk_get_rate(i2c->clk_main) / i2c->clk_src_div);
+#else
+	ret = i2c_set_speed(i2c, I2C_CLK_RATE);
+#endif
+	if (ret) {
+		dev_info(i2c->dev, "Failed to set the speed\n");
+		return -EINVAL;
+	}
+
+	if ((i2c->dev_comp->ver == 0x2) && i2c->ltiming_reg) {
+		u32 tv1, tv2, tv;
+#if !defined(CONFIG_MT_I2C_FPGA_ENABLE)
+		tv1 = (clk_get_rate(i2c->clk_main) / i2c->clk_src_div) / 1000;
+#else
+		tv1 = I2C_CLK_RATE / 1000;
+#endif
+		tv1 = tv1 * MAX_SCL_LOW_TIME;
+		tv2 = (((i2c->ltiming_reg & LSTEP_MSK) + 1) *
+		      (((i2c->ltiming_reg & LSAMPLE_MSK) >> 6) + 1));
+		tv = DIV_ROUND_UP(tv1, tv2);
+		i2c_writew(tv & 0xFFFF, i2c, OFFSET_HW_TIMEOUT);
+		/* dev_info(i2c->dev, "scl time out value %04X\n", */
+		/*	    (u16)(tv & 0xFFFF));		   */
+	}
+	if (i2c->dev_comp->set_dt_div) {
+		if (i2c->clk_src_div > MAX_CLOCK_DIV) {
+			dev_info(i2c->dev, "Clock div error\n");
+			return -EINVAL;
+		}
+		i2c_writew(((i2c->clk_src_div - 1) << 8) +
+			(i2c->clk_src_div - 1),
+			i2c, OFFSET_CLOCK_DIV);
+	}
+
+	/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
+	if (i2c->have_pmic)
+		i2c_writew(I2C_CONTROL_WRAPPER, i2c, OFFSET_PATH_DIR);
+	if (speed_hz > 400000)
+		control_reg = I2C_CONTROL_ACKERR_DET_EN;
+	else
+		control_reg = I2C_CONTROL_ACKERR_DET_EN |
+			I2C_CONTROL_CLK_EXT_EN;
+	if (isDMA == true) /* DMA */
+		control_reg |=
+			I2C_CONTROL_DMA_EN |
+			I2C_CONTROL_DMAACK_EN |
+			I2C_CONTROL_ASYNC_MODE;
+
+	if (speed_hz > 400000)
+		control_reg |= I2C_CONTROL_RS;
+	if (i2c->op == I2C_MASTER_WRRD)
+		control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS;
+	i2c_writew(control_reg, i2c, OFFSET_CONTROL);
+
+	/* set start condition */
+	if (speed_hz <= 100000)
+		i2c_writew(I2C_ST_START_CON, i2c, OFFSET_EXT_CONF);
+	else {
+		if (i2c->dev_comp->ext_time_config != 0)
+			i2c_writew(i2c->dev_comp->ext_time_config,
+			i2c, OFFSET_EXT_CONF);
+		else
+			i2c_writew(I2C_FS_START_CON, i2c, OFFSET_EXT_CONF);
+	}
+
+	/* delay 5 scl_clk time between two transaction */
+	/* if (~control_reg & I2C_CONTROL_RS) */
+	i2c_writew(I2C_DELAY_LEN, i2c, OFFSET_DELAY_LEN);
+
+	/* Set ioconfig */
+	if (i2c->use_push_pull) {
+		ioconfig_reg = I2C_IO_CONFIG_PUSH_PULL;
+	} else {
+		ioconfig_reg = I2C_IO_CONFIG_OPEN_DRAIN;
+		if (i2c->dev_comp->set_aed)
+			ioconfig_reg |= ((i2c->aed<<4) &
+					I2C_IO_CONFIG_AED_MASK);
+	}
+	i2c_writew(ioconfig_reg, i2c, OFFSET_IO_CONFIG);
+
+	/* set i3c high speed master code */
+	i2c->i3c_en = (i2c_readw(i2c, OFFSET_DMA_FSM_DEBUG)) & I3C_EN;
+	if (i2c->i3c_en && (i2c->speed_hz > MAX_FS_PLUS_MODE_SPEED)
+		&& (!i2c->hs_only)) {
+		i2c_writew(I2C_HFIFO_ADDR_CLR, i2c, OFFSET_FIFO_ADDR_CLR);
+		i2c_writew(I3C_UNLOCK_HFIFO | I3C_NINTH_BIT | MASTER_CODE,
+			i2c, OFFSET_HFIFO_DATA);
+	}
+
+	if (i2c->dev_comp->ver != 0x2)
+		i2c_writew(i2c->timing_reg, i2c, OFFSET_TIMING);
+	else
+		i2c_writew(i2c->timing_reg | I2C_TIMEOUT_EN,
+			i2c, OFFSET_TIMING);
+	if (i2c->dev_comp->set_ltiming)
+		i2c_writew(i2c->ltiming_reg, i2c, OFFSET_LTIMING);
+	i2c_writew(i2c->high_speed_reg, i2c, OFFSET_HS);
+
+	if (i2c->have_dcm)
+		i2c_writew(I2C_DCM_ENABLE, i2c, OFFSET_DCM_EN);
+
+	addr_reg = i2c->addr << 1;
+	if (i2c->op == I2C_MASTER_RD)
+		addr_reg |= 0x1;
+	i2c_writew(addr_reg, i2c, OFFSET_SLAVE_ADDR);
+	int_reg = I2C_HS_NACKERR | I2C_ACKERR |
+		  I2C_TRANSAC_COMP | I2C_ARB_LOST;
+	if (i2c->dev_comp->ver == 0x2)
+		int_reg |= I2C_BUS_ERR | I2C_TIMEOUT;
+	if (i2c->ch_offset)
+		int_reg &= ~(I2C_HS_NACKERR | I2C_ACKERR);
+	/* Clear interrupt status */
+	i2c_writew(I2C_INTR_ALL, i2c, OFFSET_INTR_STAT);
+	if (i2c->ch_offset != 0)
+		i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR,
+			   i2c, OFFSET_FIFO_ADDR_CLR);
+	else
+		i2c_writew(I2C_FIFO_ADDR_CLR, i2c, OFFSET_FIFO_ADDR_CLR);
+	/* Enable interrupt */
+	i2c_writew(int_reg, i2c, OFFSET_INTR_MASK);
+
+	/* Set transfer and transaction len */
+	if (i2c->op == I2C_MASTER_WRRD) {
+		if ((i2c->appm) && (i2c->dev_comp->idvfs_i2c)) {
+			i2c_writew(
+				(i2c->msg_len & 0xFF) |
+				((i2c->msg_aux_len<<8) & 0x1F00),
+				i2c, OFFSET_TRANSFER_LEN);
+		} else {
+			i2c_writew(i2c->msg_len, i2c,
+				OFFSET_TRANSFER_LEN);
+			i2c_writew(i2c->msg_aux_len, i2c,
+				OFFSET_TRANSFER_LEN_AUX);
+		}
+		i2c_writew(0x02, i2c, OFFSET_TRANSAC_LEN);
+	} else if (i2c->op == I2C_MASTER_MULTI_WR) {
+		i2c_writew(i2c->msg_len, i2c, OFFSET_TRANSFER_LEN);
+		i2c_writew(i2c->total_len / i2c->msg_len,
+			i2c, OFFSET_TRANSAC_LEN);
+	} else {
+		i2c_writew(i2c->msg_len, i2c, OFFSET_TRANSFER_LEN);
+		i2c_writew(0x01, i2c, OFFSET_TRANSAC_LEN);
+	}
+
+	/* Prepare buffer data to start transfer */
+	if (isDMA == true && (!i2c->is_ccu_trig)) {
+#ifdef CONFIG_MTK_LM_MODE
+		if ((i2c->dev_comp->dma_support == 1) && (enable_4G())) {
+			i2c_writel_dma(0x1, i2c, OFFSET_TX_MEM_ADDR2);
+			i2c_writel_dma(0x1, i2c, OFFSET_RX_MEM_ADDR2);
+		}
+#endif
+		if (i2c->op == I2C_MASTER_RD) {
+			i2c_writel_dma(I2C_DMA_INT_FLAG_NONE,
+				i2c, OFFSET_INT_FLAG);
+			i2c_writel_dma(I2C_DMA_CON_RX, i2c, OFFSET_CON);
+			i2c_writel_dma(
+				lower_32_bits(i2c->dma_buf.paddr),
+				i2c, OFFSET_RX_MEM_ADDR);
+			if ((i2c->dev_comp->dma_support >= 2))
+				i2c_writel_dma(
+					upper_32_bits(i2c->dma_buf.paddr),
+					i2c, OFFSET_RX_MEM_ADDR2);
+			i2c_writel_dma(i2c->msg_len, i2c, OFFSET_RX_LEN);
+		} else if (i2c->op == I2C_MASTER_WR ||
+				i2c->op == I2C_MASTER_MULTI_WR) {
+			i2c_writel_dma(I2C_DMA_INT_FLAG_NONE,
+				i2c, OFFSET_INT_FLAG);
+			i2c_writel_dma(I2C_DMA_CON_TX, i2c, OFFSET_CON);
+			i2c_writel_dma(
+				lower_32_bits(i2c->dma_buf.paddr),
+				i2c, OFFSET_TX_MEM_ADDR);
+			if ((i2c->dev_comp->dma_support >= 2))
+				i2c_writel_dma(
+				upper_32_bits(i2c->dma_buf.paddr),
+				i2c, OFFSET_TX_MEM_ADDR2);
+
+			i2c_writel_dma(i2c->total_len, i2c, OFFSET_TX_LEN);
+		} else {
+			i2c_writel_dma(0x0000, i2c, OFFSET_INT_FLAG);
+			i2c_writel_dma(0x0000, i2c, OFFSET_CON);
+			i2c_writel_dma(lower_32_bits(i2c->dma_buf.paddr),
+				i2c, OFFSET_TX_MEM_ADDR);
+			i2c_writel_dma(lower_32_bits(i2c->dma_buf.paddr),
+				i2c, OFFSET_RX_MEM_ADDR);
+			if ((i2c->dev_comp->dma_support >= 2)) {
+				i2c_writel_dma(
+					upper_32_bits(i2c->dma_buf.paddr),
+					i2c, OFFSET_TX_MEM_ADDR2);
+				i2c_writel_dma(
+					upper_32_bits(i2c->dma_buf.paddr),
+					i2c, OFFSET_RX_MEM_ADDR2);
+			}
+			i2c_writel_dma(i2c->msg_len, i2c, OFFSET_TX_LEN);
+			i2c_writel_dma(i2c->msg_aux_len, i2c, OFFSET_RX_LEN);
+		}
+		record_i2c_dma_info(i2c);
+		/* flush before sending DMA start */
+		mb();
+		i2c_writel_dma(I2C_DMA_START_EN, i2c, OFFSET_EN);
+	} else {
+		if (i2c->op != I2C_MASTER_RD && (!i2c->is_ccu_trig)) {
+			data_size = i2c->total_len;
+			ptr = i2c->dma_buf.vaddr;
+			while (data_size--) {
+				i2c_writew(*ptr, i2c, OFFSET_DATA_PORT);
+				ptr++;
+			}
+		}
+	}
+	if (i2c->dev_comp->ver == 0x2) {
+		if (!i2c->is_ccu_trig)
+			i2c_writew(I2C_MCU_INTR_EN, i2c, OFFSET_MCU_INTR);
+		else {
+			dev_info(i2c->dev, "I2C CCU trig.\n");
+			return 0;
+		}
+	}
+
+	/* flush before sending start */
+	mb();
+	if (!i2c->is_hw_trig)
+		i2c_writew(I2C_TRANSAC_START, i2c, OFFSET_START);
+	else {
+		dev_info(i2c->dev, "I2C hw trig.\n");
+		return 0;
+	}
+
+	tmo = wait_event_timeout(i2c->wait, i2c->trans_stop, tmo);
+
+	record_i2c_info(i2c, tmo);
+
+	if (tmo == 0) {
+		dev_info(i2c->dev, "addr:0x%x,transfer timeout\n",
+			i2c->addr);
+		start_reg = i2c_readw(i2c, OFFSET_START);
+		dev_info(i2c->dev,
+			"timeout:start=0x%x,ch_err=0x%x\n",
+			start_reg, i2c_readw(i2c, OFFSET_ERROR));
+
+		i2c_dump_info(i2c);
+		i2c_gpio_dump_info(i2c);
+		#if defined(CONFIG_MTK_GIC_EXT)
+		mt_irq_dump_status(i2c->irqnr);
+		#endif
+		dump_cg_regs(i2c);
+		if (i2c->ch_offset != 0)
+			i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR,
+				   i2c, OFFSET_FIFO_ADDR_CLR);
+		else
+			i2c_writew(I2C_FIFO_ADDR_CLR, i2c,
+				   OFFSET_FIFO_ADDR_CLR);
+
+		/* This slave addr is used to check whether the shadow RG is */
+		/* mapped normally or not */
+		dev_info(i2c->dev, "SLAVE_ADDR=0x%x (shadow RG)",
+			i2c_readw_shadow(i2c, OFFSET_SLAVE_ADDR));
+		mt_i2c_init_hw(i2c);
+		if ((i2c->ch_offset) && (start_reg & I2C_RESUME_ARBIT)) {
+			i2c_writew_shadow(I2C_RESUME_ARBIT, i2c, OFFSET_START);
+			dev_info(i2c->dev, "bus channel transferred\n");
+		}
+
+		if (start_reg & I2C_TRANSAC_START) {
+			dev_info(i2c->dev, "bus tied low/high(0x%x)\n",
+				start_reg);
+			return -EIO;
+		}
+		return -ETIMEDOUT;
+	}
+	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR |
+	    I2C_TIMEOUT | I2C_BUS_ERR | I2C_IBI)) {
+		dev_info(i2c->dev,
+			"error:addr=0x%x,irq_stat=0x%x,ch_offset=0x%x,mask:0x%x\n",
+			i2c->addr, i2c->irq_stat, i2c->ch_offset, int_reg);
+
+		/* clear fifo addr:bit2,multi-chn;bit0,normal */
+		i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR,
+			i2c, OFFSET_FIFO_ADDR_CLR);
+
+		if (i2c->ext_data.isEnable ==  false ||
+			i2c->ext_data.isFilterMsg == false) {
+			i2c_dump_info(i2c);
+			i2c_gpio_dump_info(i2c);
+		} else
+			dev_info(i2c->dev, "addr:0x%x,ext_data skip more log\n",
+				i2c->addr);
+
+		if ((i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)))
+			dev_info(i2c->dev, "addr:0x%x,ACK error\n", i2c->addr);
+
+		if (i2c->irq_stat & I2C_TIMEOUT)
+			dev_info(i2c->dev, "addr:0x%x,SCL tied low timeout error\n",
+				i2c->addr);
+
+		if ((i2c->irq_stat & I2C_BUS_ERR))
+			dev_info(i2c->dev,
+				"bus error:start=0x%x,ch_err=0x%x,dbg_stat=0x%x\n",
+				i2c_readw(i2c, OFFSET_START),
+				i2c_readw(i2c, OFFSET_ERROR),
+				i2c_readw(i2c, OFFSET_DEBUGSTAT));
+
+		if ((i2c->irq_stat & I2C_IBI)) {
+			dev_info(i2c->dev,
+				"IBI error:start=0x%x,ch_err=0x%x,dbg_stat=0x%x\n",
+				i2c_readw(i2c, OFFSET_START),
+				i2c_readw(i2c, OFFSET_ERROR),
+				i2c_readw(i2c, OFFSET_DEBUGSTAT));
+		}
+
+		if ((i2c->irq_stat & I2C_TRANSAC_COMP) && i2c->ch_offset &&
+		    (!(i2c->irq_stat & I2C_BUS_ERR))) {
+			dev_info(i2c->dev, "trans done with error");
+			return -EREMOTEIO;
+		}
+
+		/* Need init&kick if (intr_state&intr_mask) is greater than 1 */
+		if ((i2c->irq_stat & int_reg) > 1) {
+			mt_i2c_init_hw(i2c);
+			if (i2c->ch_offset) {
+				i2c_writew_shadow(I2C_RESUME_ARBIT,
+					i2c, OFFSET_START);
+				dev_info(i2c->dev, "bus channel transferred\n");
+			}
+		}
+		return -EREMOTEIO;
+	}
+	if (i2c->op != I2C_MASTER_WR && isDMA == false) {
+		if (i2c->op == I2C_MASTER_WRRD)
+			data_size = i2c->msg_aux_len;
+		else
+			data_size = i2c->msg_len;
+		ptr = i2c->dma_buf.vaddr;
+		while (data_size--) {
+			*ptr = i2c_readw(i2c, OFFSET_DATA_PORT);
+			ptr++;
+		}
+	}
+	dev_dbg(i2c->dev, "i2c transferred done.\n");
+
+	return 0;
+}
+
+static inline void mt_i2c_copy_to_dma(struct mt_i2c *i2c, struct i2c_msg *msg)
+{
+	/*
+	 * if the operate is write, write-read, multi-write,
+	 * need to copy the data to DMA memory.
+	 */
+	if (!(msg->flags & I2C_M_RD))
+		memcpy(i2c->dma_buf.vaddr + i2c->total_len - msg->len,
+			msg->buf, msg->len);
+}
+
+static inline void mt_i2c_copy_from_dma(struct mt_i2c *i2c,
+	struct i2c_msg *msg)
+{
+	/* if the operate is read, need to copy the data from DMA memory */
+	if (msg->flags & I2C_M_RD)
+		memcpy(msg->buf, i2c->dma_buf.vaddr, msg->len);
+}
+
+/*
+ * In MTK platform the STOP will be issued after each
+ * message was transferred which is not flow the clarify
+ * for i2c_transfer(), several I2C devices tolerate the STOP,
+ * but some device need Repeat-Start and do not compatible with STOP
+ * MTK platform has WRRD mode which can write then read with
+ * Repeat-Start between two message, so we combined two
+ * messages into one transaction.
+ * The max read length is 4096
+ */
+static bool mt_i2c_should_combine(struct i2c_msg *msg)
+{
+	struct i2c_msg *next_msg = msg + 1;
+
+	if ((next_msg->len < 4096) &&
+			msg->addr == next_msg->addr &&
+			!(msg->flags & I2C_M_RD) &&
+			(next_msg->flags & I2C_M_RD) == I2C_M_RD) {
+		return true;
+	}
+	return false;
+}
+
+static bool mt_i2c_should_batch(struct i2c_msg *prev, struct i2c_msg *next)
+{
+	if ((prev == NULL) || (next == NULL) ||
+	    (prev->flags & I2C_M_RD) || (next->flags & I2C_M_RD))
+		return false;
+	if ((next != NULL) && (prev != NULL) &&
+	    (prev->len == next->len && prev->addr == next->addr))
+		return true;
+	return false;
+}
+
+static int __mt_i2c_transfer(struct mt_i2c *i2c,
+	struct i2c_msg msgs[], int num)
+{
+	int ret;
+	int left_num = num;
+
+	while (left_num--) {
+		/* In MTK platform the max transfer number is 4096 */
+		if (msgs->len > MAX_DMA_TRANS_SIZE) {
+			dev_dbg(i2c->dev,
+				" message data length is more than 255\n");
+			ret = -EINVAL;
+			goto err_exit;
+		}
+		if (msgs->addr == 0) {
+			dev_dbg(i2c->dev, " addr is invalid.\n");
+			ret = -EINVAL;
+			goto err_exit;
+		}
+		if (msgs->buf == NULL) {
+			dev_dbg(i2c->dev, " data buffer is NULL.\n");
+			ret = -EINVAL;
+			goto err_exit;
+		}
+
+		i2c->addr = msgs->addr;
+		i2c->msg_len = msgs->len;
+		i2c->msg_aux_len = 0;
+
+		if ((left_num + 1 == num) ||
+			!mt_i2c_should_batch(msgs - 1, msgs)) {
+			i2c->total_len = msgs->len;
+			if (msgs->flags & I2C_M_RD)
+				i2c->op = I2C_MASTER_RD;
+			else
+				i2c->op = I2C_MASTER_WR;
+		} else {
+			i2c->total_len += msgs->len;
+		}
+
+		/*
+		 * always use DMA mode.
+		 * 1st when write need copy the data of message to dma memory
+		 * 2nd when read need copy the DMA data to the message buffer.
+		 * The length should be less than 255.
+		 */
+		mt_i2c_copy_to_dma(i2c, msgs);
+
+		if (left_num >= 1) {
+			if (mt_i2c_should_batch(msgs, msgs + 1)) {
+				i2c->op = I2C_MASTER_MULTI_WR;
+				msgs++;
+				continue;
+			}
+			if (mt_i2c_should_combine(msgs)) {
+				i2c->msg_aux_len = (msgs + 1)->len;
+				i2c->op = I2C_MASTER_WRRD;
+				left_num--;
+			}
+		}
+
+		/* Use HW semaphore to protect device access between
+		 * AP and SPM, or SCP
+		 */
+		if (i2c_get_semaphore(i2c) != 0) {
+			dev_info(i2c->dev, "get hw semaphore failed.\n");
+			return -EBUSY;
+		}
+		ret = mt_i2c_do_transfer(i2c);
+		/* Use HW semaphore to protect device access between
+		 * AP and SPM, or SCP
+		 */
+		if (i2c_release_semaphore(i2c) != 0) {
+			dev_info(i2c->dev, "release hw semaphore failed.\n");
+			ret = -EBUSY;
+		}
+		if (ret < 0)
+			goto err_exit;
+		if (i2c->op == I2C_MASTER_WRRD)
+			mt_i2c_copy_from_dma(i2c, msgs + 1);
+		else
+			mt_i2c_copy_from_dma(i2c, msgs);
+
+		msgs++;
+		/* after combined two messages so we need ignore one */
+		if (left_num > 0 && i2c->op == I2C_MASTER_WRRD)
+			msgs++;
+	}
+	/* the return value is number of executed messages */
+	ret = num;
+err_exit:
+	return ret;
+}
+
+#ifdef CONFIG_TRUSTONIC_TEE_SUPPORT
+int i2c_tui_enable_clock(int id)
+{
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+	int ret;
+
+	adap = i2c_get_adapter(id);
+	if (!adap) {
+		pr_info("Cannot get adapter\n");
+		return -1;
+	}
+
+	i2c = i2c_get_adapdata(adap);
+	ret = clk_prepare_enable(i2c->clk_main);
+	if (ret) {
+		pr_info("Cannot enable main clk\n");
+		return ret;
+	}
+	ret = clk_prepare_enable(i2c->clk_dma);
+	if (ret) {
+		pr_info("Cannot enable dma clk\n");
+		clk_disable_unprepare(i2c->clk_main);
+		return ret;
+	}
+
+	return 0;
+}
+
+int i2c_tui_disable_clock(int id)
+{
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+
+	adap = i2c_get_adapter(id);
+	if (!adap) {
+		pr_info("Cannot get adapter\n");
+		return -1;
+	}
+
+	i2c = i2c_get_adapdata(adap);
+	clk_disable_unprepare(i2c->clk_dma);
+	clk_disable_unprepare(i2c->clk_main);
+
+	return 0;
+}
+#endif
+
+static int mt_i2c_transfer(struct i2c_adapter *adap,
+	struct i2c_msg msgs[], int num)
+{
+	int ret;
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	ret = mt_i2c_clock_enable(i2c);
+	if (ret)
+		return -EBUSY;
+
+	mutex_lock(&i2c->i2c_mutex);
+	ret = __mt_i2c_transfer(i2c, msgs, num);
+	mutex_unlock(&i2c->i2c_mutex);
+
+	mt_i2c_clock_disable(i2c);
+	return ret;
+}
+
+
+static void mt_i2c_parse_extension(struct mt_i2c_ext *pext, u32 ext_flag,
+							u32 timing)
+{
+	if (ext_flag & I2C_A_FILTER_MSG)
+		pext->isFilterMsg = true;
+	if (timing)
+		pext->timing = timing;
+}
+
+int mtk_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num,
+					u32 ext_flag, u32 timing)
+{
+	int ret;
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	ret = mt_i2c_clock_enable(i2c);
+	if (ret)
+		return -EBUSY;
+
+	mutex_lock(&i2c->i2c_mutex);
+	i2c->ext_data.isEnable = true;
+
+	mt_i2c_parse_extension(&i2c->ext_data, ext_flag, timing);
+	ret = __mt_i2c_transfer(i2c, msgs, num);
+
+	i2c->ext_data.isEnable = false;
+	mutex_unlock(&i2c->i2c_mutex);
+
+	mt_i2c_clock_disable(i2c);
+	return ret;
+}
+EXPORT_SYMBOL(mtk_i2c_transfer);
+
+int hw_trig_i2c_enable(struct i2c_adapter *adap)
+{
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (!i2c->buffermode)
+		return -1;
+	if (mt_i2c_clock_enable(i2c))
+		return -EBUSY;
+
+	mutex_lock(&i2c->i2c_mutex);
+	i2c->is_hw_trig = true;
+	mutex_unlock(&i2c->i2c_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(hw_trig_i2c_enable);
+
+int hw_trig_i2c_disable(struct i2c_adapter *adap)
+{
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (!i2c->buffermode)
+		return -1;
+	mutex_lock(&i2c->i2c_mutex);
+	i2c->is_hw_trig = false;
+	mutex_unlock(&i2c->i2c_mutex);
+	mt_i2c_wait_done(i2c, 0);
+	mt_i2c_clock_disable(i2c);
+	return 0;
+}
+EXPORT_SYMBOL(hw_trig_i2c_disable);
+
+int hw_trig_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+		int num)
+{
+	int ret;
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (!i2c->buffermode)
+		return -1;
+	mutex_lock(&i2c->i2c_mutex);
+	ret = __mt_i2c_transfer(i2c, msgs, num);
+	mutex_unlock(&i2c->i2c_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(hw_trig_i2c_transfer);
+
+int i2c_ccu_enable(struct i2c_adapter *adap, u16 ch_offset)
+{
+	int ret;
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+	char buf[1];
+	/*This is just a dummy msg which is meaningless since these parameter
+	 * is actually not used.
+	 */
+	struct i2c_msg dummy_msg = {
+		.addr = 0x1,
+		.flags = I2C_MASTER_RD,
+		.len = 1,
+		.buf = (char *)buf,
+	};
+	if (mt_i2c_clock_enable(i2c))
+		return -EBUSY;
+	mutex_lock(&i2c->i2c_mutex);
+	i2c->is_ccu_trig = true;
+	i2c->ext_data.ch_offset = ch_offset;
+	i2c->ext_data.is_ch_offset = true;
+	ret = __mt_i2c_transfer(i2c, &dummy_msg, 1);
+	i2c->is_ccu_trig = false;
+	i2c->ext_data.is_ch_offset = false;
+	mutex_unlock(&i2c->i2c_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(i2c_ccu_enable);
+
+int i2c_ccu_disable(struct i2c_adapter *adap)
+{
+	struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+	mt_i2c_wait_done(i2c, i2c->ccu_offset);
+	mt_i2c_clock_disable(i2c);
+	return 0;
+}
+EXPORT_SYMBOL(i2c_ccu_disable);
+
+static irqreturn_t mt_i2c_irq(int irqno, void *dev_id)
+{
+	struct mt_i2c *i2c = dev_id;
+
+	#if 0
+	/* Clear interrupt mask */
+	i2c_writew(~(I2C_HS_NACKERR | I2C_ACKERR | I2C_TRANSAC_COMP),
+		i2c, OFFSET_INTR_MASK);
+	i2c->irq_stat = i2c_readw(i2c, OFFSET_INTR_STAT);
+	i2c_writew(I2C_HS_NACKERR | I2C_ACKERR | I2C_TRANSAC_COMP,
+		i2c, OFFSET_INTR_STAT);
+	#endif
+
+	/* mask and clear all interrupt for i2c, need think of i3c~~ */
+	i2c_writew(~(I2C_INTR_ALL), i2c, OFFSET_INTR_MASK);
+	i2c->irq_stat = i2c_readw(i2c, OFFSET_INTR_STAT);
+	i2c_writew(I2C_INTR_ALL, i2c, OFFSET_INTR_STAT);
+	i2c->trans_stop = true;
+	if (!i2c->is_hw_trig) {
+		wake_up(&i2c->wait);
+		if (!i2c->irq_stat) {
+			dev_info(i2c->dev, "addr: 0x%x, irq stat 0\n",
+				i2c->addr);
+
+			i2c_dump_info(i2c);
+			#if defined(CONFIG_MTK_GIC_EXT)
+			mt_irq_dump_status(i2c->irqnr);
+			#endif
+		} else {
+			/* for bxx debug start */
+			if ((i2c->irq_stat & (I2C_IBI | I2C_BUS_ERR))) {
+				dev_info(i2c->dev, "[bxx]cg_cnt:%d,irq_stat:0x%x\n",
+					i2c->cg_cnt, i2c->irq_stat);
+				dev_info(i2c->dev, "0x84=0x%x\n",
+					i2c_readw(i2c, OFFSET_ERROR));
+
+				pr_info("[bxx]0xE0=0x%x,0x1E0=0x%x,0x2E0=0x%x\n",
+					_i2c_readw(i2c, 0xE0),
+					_i2c_readw(i2c, 0x1E0),
+					_i2c_readw(i2c, 0x2E0));
+				pr_info("[bxx]0xE4=0x%x,0x1E4=0x%x,0x2E4=0x%x\n",
+					_i2c_readw(i2c, 0xE4),
+					_i2c_readw(i2c, 0x1E4),
+					_i2c_readw(i2c, 0x2E4));
+				pr_info("[bxx]0xE8=0x%x,0x1E8=0x%x,0x2E8=0x%x\n",
+					_i2c_readw(i2c, 0xE8),
+					_i2c_readw(i2c, 0x1E8),
+					_i2c_readw(i2c, 0x2E8));
+				pr_info("[bxx]0xEC=0x%x,0x1EC=0x%x,0x2EC=0x%x\n",
+					_i2c_readw(i2c, 0xEC),
+					_i2c_readw(i2c, 0x1EC),
+					_i2c_readw(i2c, 0x2EC));
+				pr_info("[bxx]0x58=0x%x,0x158=0x%x,0x258=0x%x\n",
+					_i2c_readw(i2c, 0x58),
+					_i2c_readw(i2c, 0x158),
+					_i2c_readw(i2c, 0x258));
+				/* IBI triggered */
+				pr_info("[bxx]0x54=0x%x,0x154=0x%x,0x254=0x%x\n",
+					_i2c_readw(i2c, 0x54),
+					_i2c_readw(i2c, 0x154),
+					_i2c_readw(i2c, 0x254));
+				/* for bxx debug end */
+			}
+		}
+	} else {/* dump regs info for hw trig i2c if ACK err */
+		if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
+			dev_info(i2c->dev, "addr:0x%x,irq_stat:0x%x,transfer ACK error\n",
+				i2c->addr, i2c->irq_stat);
+			i2c_dump_info(i2c);
+			mt_i2c_init_hw(i2c);
+		} else {
+			dev_info(i2c->dev, "addr:0x%x, other irq_stat:0x%x\n",
+				i2c->addr, i2c->irq_stat);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static u32 mt_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm mt_i2c_algorithm = {
+	.master_xfer = mt_i2c_transfer,
+	.functionality = mt_i2c_functionality,
+};
+
+static int mt_i2c_parse_dt(struct device_node *np, struct mt_i2c *i2c)
+{
+	int ret = -1;
+
+	i2c->speed_hz = I2C_DEFAUT_SPEED;
+	of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
+	of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
+	of_property_read_u32(np, "scl-gpio-id", &i2c->scl_gpio_id);
+	of_property_read_u32(np, "sda-gpio-id", &i2c->sda_gpio_id);
+	of_property_read_u32(np, "gpio_start", &i2c->gpio_start);
+	of_property_read_u32(np, "mem_len", &i2c->mem_len);
+	of_property_read_u32(np, "eh_cfg", &i2c->offset_eh_cfg);
+	of_property_read_u32(np, "pu_cfg", &i2c->offset_pu_cfg);
+	of_property_read_u32(np, "rsel_cfg", &i2c->offset_rsel_cfg);
+	of_property_read_u32(np, "id", (u32 *)&i2c->id);
+	of_property_read_u16(np, "clk_sta_offset",
+		(u16 *)&i2c->clk_sta_offset);
+	of_property_read_u8(np, "cg_bit", (u8 *)&i2c->cg_bit);
+	of_property_read_u32(np, "aed", &i2c->aed);
+	of_property_read_u32(np, "ch_offset_default",
+		&i2c->ch_offset_default);
+	of_property_read_u32(np, "ch_offset_dma_default",
+		&i2c->ch_offset_dma_default);
+	ret = of_property_read_u32(np, "ch_offset_ccu", &i2c->ccu_offset);
+	if (!ret)
+		i2c->has_ccu = true;
+	else
+		i2c->has_ccu = false;
+
+	i2c->have_pmic
+		= of_property_read_bool(np, "mediatek,have-pmic");
+	i2c->have_dcm
+		= of_property_read_bool(np, "mediatek,have-dcm");
+	i2c->use_push_pull
+		= of_property_read_bool(np, "mediatek,use-push-pull");
+	i2c->appm
+		= of_property_read_bool(np, "mediatek,appm_used");
+	i2c->gpupm
+		= of_property_read_bool(np, "mediatek,gpupm_used");
+	i2c->buffermode = of_property_read_bool(np, "mediatek,buffermode_used");
+	i2c->hs_only = of_property_read_bool(np, "mediatek,hs_only");
+	pr_info("[I2C]id:%d,freq:%d,div:%d,ch_offset:0x%x,offset_dma:0x%x,offset_ccu:0x%x\n",
+		i2c->id, i2c->speed_hz, i2c->clk_src_div,
+		i2c->ch_offset_default,
+		i2c->ch_offset_dma_default, i2c->ccu_offset);
+	if (i2c->clk_src_div == 0)
+		return -EINVAL;
+	return 0;
+}
+
+
+int mt_i2c_parse_comp_data(void)
+{
+	int ret = -1;
+	struct device_node *comp_node;
+
+	comp_node = of_find_compatible_node(NULL, NULL, "mediatek,i2c_common");
+	if (!comp_node) {
+		pr_info("Cannot find i2c_common node\n");
+		return -ENODEV;
+	}
+	of_property_read_u8(comp_node, "dma_support",
+		(u8 *)&i2c_common_compat.dma_support);
+	of_property_read_u8(comp_node, "idvfs",
+		(u8 *)&i2c_common_compat.idvfs_i2c);
+	of_property_read_u8(comp_node, "set_dt_div",
+		(u8 *)&i2c_common_compat.set_dt_div);
+	of_property_read_u8(comp_node, "check_max_freq",
+		(u8 *)&i2c_common_compat.check_max_freq);
+	of_property_read_u8(comp_node, "set_ltiming",
+		(u8 *)&i2c_common_compat.set_ltiming);
+	of_property_read_u8(comp_node, "set_aed",
+		(u8 *)&i2c_common_compat.set_aed);
+	of_property_read_u16(comp_node, "ext_time_config",
+		(u16 *)&i2c_common_compat.ext_time_config);
+	ret = of_property_count_u8_elems(comp_node, "clk_compatible");
+	if (ret > 0)
+		of_property_read_u8_array(comp_node, "clk_compatible",
+			(u8 *)i2c_common_compat.clk_compatible, ret);
+	else
+		pr_info("[I2C]No clk_compatible(%d)\n", ret);
+	of_property_read_u32(comp_node, "clk_sel_offset",
+		(u32 *)&i2c_common_compat.clk_sel_offset);
+	of_property_read_u32(comp_node, "arbit_offset",
+		(u32 *)&i2c_common_compat.arbit_offset);
+	of_property_read_u8(comp_node, "ver",
+		(u8 *)&i2c_common_compat.ver);
+	of_property_read_u8(comp_node, "cnt_constraint",
+		(u8 *)&i2c_common_compat.cnt_constraint);
+	return 0;
+}
+
+static const struct of_device_id mtk_i2c_of_match[] = {
+	{ .compatible = "mediatek,i2c", .data = &i2c_common_compat},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
+
+static int mt_i2c_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mt_i2c *i2c;
+	unsigned int clk_src_in_hz;
+	struct resource *res;
+	const struct of_device_id *of_id;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct mt_i2c), GFP_KERNEL);
+	if (i2c == NULL)
+		return -ENOMEM;
+
+	ret = mt_i2c_parse_dt(pdev->dev.of_node, i2c);
+	if (ret)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	if (i2c->id < I2C_MAX_CHANNEL)
+		g_mt_i2c[i2c->id] = i2c;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->pdmabase))
+		return PTR_ERR(i2c->pdmabase);
+
+	i2c->gpiobase = devm_ioremap(&pdev->dev, i2c->gpio_start, i2c->mem_len);
+	if (IS_ERR(i2c->gpiobase)) {
+		i2c->gpiobase = NULL;
+		dev_info(&pdev->dev, "do not have gpio baseaddress node\n");
+	}
+
+	i2c->irqnr = platform_get_irq(pdev, 0);
+	if (i2c->irqnr <= 0)
+		return -EINVAL;
+	init_waitqueue_head(&i2c->wait);
+
+	ret = devm_request_irq(&pdev->dev, i2c->irqnr, mt_i2c_irq,
+		IRQF_NO_SUSPEND | IRQF_TRIGGER_NONE, I2C_DRV_NAME, i2c);
+	if (ret < 0) {
+		dev_info(&pdev->dev,
+			"Request I2C IRQ %d fail\n", i2c->irqnr);
+		return ret;
+	}
+	of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node);
+	if (!of_id)
+		return -EINVAL;
+
+	i2c->dev_comp = of_id->data;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+	i2c->dev = &i2c->adap.dev;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &mt_i2c_algorithm;
+	i2c->adap.algo_data = NULL;
+	i2c->adap.timeout = 2 * HZ;
+	i2c->adap.retries = 1;
+	i2c->adap.nr = i2c->id;
+	spin_lock_init(&i2c->cg_lock);
+
+	if (i2c->dev_comp->dma_support == 2) {
+		if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(33))) {
+			dev_info(&pdev->dev, "dma_set_mask return error.\n");
+			return -EINVAL;
+		}
+	} else if (i2c->dev_comp->dma_support == 3) {
+		if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(36))) {
+			dev_info(&pdev->dev, "dma_set_mask return error.\n");
+			return -EINVAL;
+		}
+	}
+
+#if !defined(CONFIG_MT_I2C_FPGA_ENABLE)
+	i2c->clk_main = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(i2c->clk_main)) {
+		dev_info(&pdev->dev, "cannot get main clock\n");
+		return PTR_ERR(i2c->clk_main);
+	}
+	i2c->clk_dma = devm_clk_get(&pdev->dev, "dma");
+	if (IS_ERR(i2c->clk_dma)) {
+		dev_info(&pdev->dev, "cannot get dma clock\n");
+		return PTR_ERR(i2c->clk_dma);
+	}
+	i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
+	if (IS_ERR(i2c->clk_arb))
+		i2c->clk_arb = NULL;
+	else
+		dev_dbg(&pdev->dev, "i2c%d has the relevant arbitrator clk.\n",
+			i2c->id);
+	i2c->clk_pal = devm_clk_get(&pdev->dev, "pal");
+	if (IS_ERR(i2c->clk_pal))
+		i2c->clk_pal = NULL;
+	else
+		dev_dbg(&pdev->dev, "i2c%d has the relevant pal clk.\n",
+			i2c->id);
+#endif
+
+	if (i2c->have_pmic) {
+		i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
+		if (IS_ERR(i2c->clk_pmic)) {
+			dev_info(&pdev->dev, "cannot get pmic clock\n");
+			return PTR_ERR(i2c->clk_pmic);
+		}
+		clk_src_in_hz = clk_get_rate(i2c->clk_pmic) / i2c->clk_src_div;
+	} else {
+		clk_src_in_hz = clk_get_rate(i2c->clk_main) / i2c->clk_src_div;
+	}
+	i2c->main_clk = clk_src_in_hz;
+	dev_info(&pdev->dev, "i2c%d clock source %p,clock src frequency %d\n",
+		i2c->id, i2c->clk_main, clk_src_in_hz);
+
+	strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
+	mutex_init(&i2c->i2c_mutex);
+	ret = i2c_set_speed(i2c, clk_src_in_hz);
+	if (ret) {
+		dev_info(&pdev->dev, "Failed to set the speed\n");
+		return -EINVAL;
+	}
+	ret = mt_i2c_clock_enable(i2c);
+	if (ret) {
+		dev_info(&pdev->dev, "clock enable failed!\n");
+		return ret;
+	}
+	mt_i2c_init_hw(i2c);
+
+	mt_i2c_clock_disable(i2c);
+	if (i2c->ch_offset_default)
+		i2c->dma_buf.vaddr = dma_alloc_coherent(&pdev->dev,
+			(PAGE_SIZE * 2), &i2c->dma_buf.paddr, GFP_KERNEL);
+	else
+		i2c->dma_buf.vaddr = dma_alloc_coherent(&pdev->dev,
+			PAGE_SIZE, &i2c->dma_buf.paddr, GFP_KERNEL);
+
+	if (i2c->dma_buf.vaddr == NULL) {
+		dev_info(&pdev->dev, "dma_alloc_coherent fail\n");
+		return -ENOMEM;
+	}
+	i2c_set_adapdata(&i2c->adap, i2c);
+	/* ret = i2c_add_adapter(&i2c->adap); */
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret) {
+		dev_info(&pdev->dev, "Failed to add i2c bus to i2c core\n");
+		free_i2c_dma_bufs(i2c);
+		return ret;
+	}
+	platform_set_drvdata(pdev, i2c);
+
+	if (!map_cg_regs(i2c))
+		pr_info("Map cg regs successfully.\n");
+
+	return 0;
+}
+
+static int mt_i2c_remove(struct platform_device *pdev)
+{
+	struct mt_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	free_i2c_dma_bufs(i2c);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+
+MODULE_DEVICE_TABLE(of, mt_i2c_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int mt_i2c_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mt_i2c *i2c = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	spin_lock(&i2c->cg_lock);
+	if (i2c->cg_cnt > 0) {
+		ret = -EBUSY;
+		dev_info(i2c->dev, "%s(%d) busy\n", __func__, i2c->cg_cnt);
+	} else
+		i2c->suspended = true;
+	spin_unlock(&i2c->cg_lock);
+
+	return ret;
+}
+
+static int mt_i2c_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mt_i2c *i2c = platform_get_drvdata(pdev);
+
+	spin_lock(&i2c->cg_lock);
+	i2c->suspended = false;
+	spin_unlock(&i2c->cg_lock);
+
+	if (i2c->ch_offset_default) {
+		if (mt_i2c_clock_enable(i2c))
+			dev_info(i2c->dev, "%s enable clock failed\n",
+				 __func__);
+#if 0
+		/* Disable rollback mode for multi-channel */
+		mt_secure_call(MTK_SIP_KERNEL_I2C_SEC_WRITE,
+			i2c->id, V2_OFFSET_ROLLBACK, 0);
+#endif
+		/* Enable multi-channel DMA mode at ATF */
+		mt_secure_call(MTK_SIP_KERNEL_I2C_SEC_WRITE, i2c->id,
+			       V2_OFFSET_MULTI_DMA, I2C_SHADOW_REG_MODE, 0);
+
+		mt_i2c_clock_disable(i2c);
+	}
+	return 0;
+}
+
+#endif
+
+static const struct dev_pm_ops mt_i2c_dev_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend_noirq = mt_i2c_suspend_noirq,
+	.resume_noirq = mt_i2c_resume_noirq,
+#endif
+};
+
+static struct platform_driver mt_i2c_driver = {
+	.probe = mt_i2c_probe,
+	.remove = mt_i2c_remove,
+	.driver = {
+		.name = I2C_DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &mt_i2c_dev_pm_ops,
+		.of_match_table = of_match_ptr(mtk_i2c_of_match),
+	},
+};
+
+#ifdef CONFIG_MTK_I2C_ARBITRATION
+static s32 enable_arbitration(void)
+{
+	struct device_node *pericfg_node;
+	void __iomem *pericfg_base;
+
+	pericfg_node = of_find_compatible_node(NULL, NULL, "mediatek,pericfg");
+	if (!pericfg_node) {
+		pr_info("Cannot find pericfg node\n");
+		return -ENODEV;
+	}
+	pericfg_base = of_iomap(pericfg_node, 0);
+	if (!pericfg_base) {
+		pr_info("pericfg iomap failed\n");
+		return -ENOMEM;
+	}
+	/* Enable the I2C arbitration */
+	writew(0x3, pericfg_base + OFFSET_PERI_I2C_MODE_ENABLE);
+	return 0;
+}
+#endif
+
+static s32 __init mt_i2c_init(void)
+{
+#ifdef CONFIG_MTK_I2C_ARBITRATION
+	int ret;
+
+	ret = enable_arbitration();
+	if (ret) {
+		pr_info("Cannot enalbe arbitration.\n");
+		return ret;
+	}
+#endif
+
+	if (!map_dma_regs())
+		pr_info("Mapp dma regs successfully.\n");
+	if (!mt_i2c_parse_comp_data())
+		pr_info("Get compatible data from dts successfully.\n");
+
+	pr_info("%s: driver as platform device\n", __func__);
+	return platform_driver_register(&mt_i2c_driver);
+}
+
+static void __exit mt_i2c_exit(void)
+{
+	platform_driver_unregister(&mt_i2c_driver);
+}
+
+module_init(mt_i2c_init);
+module_exit(mt_i2c_exit);
+
+/* module_platform_driver(mt_i2c_driver); */
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MediaTek I2C Bus Driver");
+MODULE_AUTHOR("Xudong Chen <xudong.chen@mediatek.com>");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.h
new file mode 100644
index 0000000..bac157c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk.h
@@ -0,0 +1,443 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Xudong.chen <xudong.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __I2C_MTK_H__
+#define __I2C_MTK_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched/clock.h>
+//#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+
+#define I2C_DEBUG_FS
+
+#define I3C_EN                           (0x01 << 15)
+#define I3C_UNLOCK_HFIFO                (0x01 << 15)
+#define I3C_NINTH_BIT                   (0x02 << 8)
+#define MASTER_CODE                     0x08
+#define I2C_HFIFO_ADDR_CLR              0x2
+
+#define I2C_HS_HOLD_SEL                 (0x01 << 15)
+#define I2C_HS_HOLD_TIME                (0x01 << 2)
+
+#define I2C_BUS_ERR			(0x01 << 8)
+#define I2C_IBI				(0x01 << 7)
+#define I2C_DMAERR			(0x01 << 6)
+#define I2C_TIMEOUT			(0x01 << 5)
+#define I2C_RS_MULTI		(0x01 << 4)
+#define I2C_ARB_LOST		(0x01 << 3)
+#define I2C_HS_NACKERR		(0x01 << 2)
+#define I2C_ACKERR			(0x01 << 1)
+#define I2C_TRANSAC_COMP	(0x01 << 0)
+#define I2C_INTR_ALL	(I2C_BUS_ERR | I2C_IBI | I2C_DMAERR | \
+				I2C_TIMEOUT | I2C_RS_MULTI | \
+				I2C_ARB_LOST | I2C_HS_NACKERR | \
+				I2C_ACKERR | I2C_TRANSAC_COMP)
+#define I2C_TRANSAC_START					(0x01 << 0)
+#define I2C_RESUME_ARBIT					(0x01 << 1)
+#define I2C_TIMING_STEP_DIV_MASK			(0x3f << 0)
+#define I2C_TIMING_SAMPLE_COUNT_MASK		(0x7 << 0)
+#define I2C_TIMING_SAMPLE_DIV_MASK		(0x7 << 8)
+#define I2C_TIMING_DATA_READ_MASK		(0x7 << 12)
+#define I2C_DCM_DISABLE					0x0000
+#define I2C_DCM_ENABLE						0x0007
+#define I2C_IO_CONFIG_OPEN_DRAIN			0x0003
+#define I2C_IO_CONFIG_PUSH_PULL			0x0000
+#define I2C_IO_CONFIG_OPEN_DRAIN_AED		0x0000
+#define I2C_IO_CONFIG_PUSH_PULL_AED		0x0000
+#define I2C_IO_CONFIG_AED_MASK			(0xfff << 4)
+#define I2C_SOFT_RST				0x0001
+#define I2C_FIFO_ADDR_CLR			0x0001
+#define I2C_FIFO_ADDR_CLR_MCH		0x0004
+#define I2C_DELAY_LEN				0x000A/* not use 0x02 */
+#define I2C_ST_START_CON			0x8001
+#define I2C_FS_START_CON			0x1800
+#define I2C_TIME_CLR_VALUE			0x0000
+#define I2C_TIME_DEFAULT_VALUE		0x0001
+#define I2C_HS_SPEED			0x0080
+#define I2C_TIMEOUT_EN				0x0001
+#define I2C_ROLLBACK				0x0001
+#define I2C_SHADOW_REG_MODE		0x0002
+
+#define I2C_HS_NACK_DET_EN		(0x1 << 1)
+
+#define I2C_DMA_CON_TX			0x0000
+#define I2C_DMA_CON_RX			0x0001
+#define I2C_DMA_START_EN		0x0001
+#define I2C_DMA_INT_FLAG_NONE	0x0000
+#define I2C_DMA_CLR_FLAG		0x0000
+#define I2C_DMA_WARM_RST		0x0001
+#define I2C_DMA_4G_MODE		0x0001
+
+#define I2C_DEFAUT_SPEED		100000/* hz */
+#define MAX_FS_MODE_SPEED		400000/* hz */
+#define MAX_FS_PLUS_MODE_SPEED          1000000/* hz */
+#define MAX_HS_MODE_SPEED		3400000/* hz */
+#define MAX_DMA_TRANS_SIZE	4096/* 255 */
+#define MAX_CLOCK_DIV			8
+#define MAX_SAMPLE_CNT_DIV	8
+#define MAX_STEP_CNT_DIV		64
+#define MAX_HS_STEP_CNT_DIV	8
+
+#define HALF_DUTY_CYCLE		50
+#define DUTY_CYCLE				45
+
+#define I2C_CONTROL_RS				(0x1 << 1)
+#define I2C_CONTROL_DMA_EN		(0x1 << 2)
+#define I2C_CONTROL_CLK_EXT_EN	(0x1 << 3)
+#define I2C_CONTROL_DIR_CHANGE	(0x1 << 4)
+#define I2C_CONTROL_ACKERR_DET_EN	(0x1 << 5)
+#define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
+#define I2C_CONTROL_DMAACK_EN	(0x1 << 8)
+#define I2C_CONTROL_ASYNC_MODE	(0x1 << 9)
+#define I2C_CONTROL_WRAPPER		(0x1 << 0)
+#define I2C_MCU_INTR_EN			0x1
+#define I2C_CCU_INTR_EN			0x2
+
+#define I2C_RECORD_LEN			10
+#define I2C_MAX_CHANNEL		10
+
+#define MAX_SCL_LOW_TIME		2/* unit: milli-second */
+#define LSAMPLE_MSK			0x1C0
+#define LSTEP_MSK				0x3F
+
+#define I2C_DRV_NAME		"mt-i2c"
+#define I2CTAG					"[I2C]"
+
+enum DMA_REGS_OFFSET {
+	OFFSET_INT_FLAG = 0x0,
+	OFFSET_INT_EN = 0x04,
+	OFFSET_EN = 0x08,
+	OFFSET_RST = 0x0C,
+	OFFSET_STOP = 0x10,
+	OFFSET_FLUSH = 0x14,
+	OFFSET_CON = 0x18,
+	OFFSET_TX_MEM_ADDR = 0x1C,
+	OFFSET_RX_MEM_ADDR = 0x20,
+	OFFSET_TX_LEN = 0x24,
+	OFFSET_RX_LEN = 0x28,
+	OFFSET_INT_BUF_SIZE = 0x38,
+	OFFSET_DEBUG_STA = 0x50,
+	OFFSET_TX_MEM_ADDR2 = 0x54,
+	OFFSET_RX_MEM_ADDR2 = 0x58,
+	OFFSET_USR_DEF_ADDR = 0x5C,
+	OFFSET_USR_DEF_CTRL = 0x60,
+};
+
+struct i2c_dma_info {
+	unsigned long base;
+	unsigned int int_flag;
+	unsigned int int_en;
+	unsigned int en;
+	unsigned int rst;
+	unsigned int stop;
+	unsigned int flush;
+	unsigned int con;
+	unsigned int tx_mem_addr;
+	unsigned int rx_mem_addr;
+	unsigned int tx_len;
+	unsigned int rx_len;
+	unsigned int int_buf_size;
+	unsigned int debug_sta;
+	unsigned int tx_mem_addr2;
+	unsigned int rx_mem_addr2;
+	unsigned int usr_def_addr;
+	unsigned int use_def_addr;
+};
+
+enum i2c_trans_st_rs {
+	I2C_TRANS_STOP = 0,
+	I2C_TRANS_REPEATED_START,
+};
+
+enum {
+	FS_MODE,
+	HS_MODE,
+};
+
+enum mt_trans_op {
+	I2C_MASTER_WR = 1,
+	I2C_MASTER_RD,
+	I2C_MASTER_WRRD,
+	I2C_MASTER_MULTI_WR,
+};
+
+enum I2C_REGS_OFFSET {
+	OFFSET_DATA_PORT = 0x0,
+	OFFSET_SLAVE_ADDR = 0x04,
+	OFFSET_INTR_MASK = 0x08,
+	OFFSET_INTR_STAT = 0x0c,
+	OFFSET_CONTROL = 0x10,
+	OFFSET_TRANSFER_LEN = 0x14,
+	OFFSET_TRANSAC_LEN = 0x18,
+	OFFSET_DELAY_LEN = 0x1c,
+	OFFSET_TIMING = 0x20,
+	OFFSET_START = 0x24,
+	OFFSET_EXT_CONF = 0x28,
+	OFFSET_LTIMING = 0x2c,
+	OFFSET_FIFO_STAT = 0x30,
+	OFFSET_FIFO_THRESH = 0x34,
+	OFFSET_FIFO_ADDR_CLR = 0x38,
+	OFFSET_IO_CONFIG = 0x40,
+	OFFSET_RSV_DEBUG = 0x44,
+	OFFSET_HS = 0x48,
+	OFFSET_SOFTRESET = 0x50,
+	OFFSET_DCM_EN = 0x54,
+	OFFSET_PATH_DIR = 0x60,
+	OFFSET_DEBUGSTAT = 0x64,
+	OFFSET_DEBUGCTRL = 0x68,
+	OFFSET_TRANSFER_LEN_AUX = 0x6c,
+	OFFSET_CLOCK_DIV = 0x70,
+
+	/* v2 add */
+	OFFSET_HW_TIMEOUT = 0xfff,
+	OFFSET_MCU_INTR = 0xfff,
+	OFFSET_TRAFFIC = 0xfff,
+	OFFSET_COMMAND = 0xfff,
+	OFFSET_CRC_CODE_ = 0xfff,
+	OFFSET_TERNARY = 0xfff,
+	OFFSET_IBI_TIMING = 0xfff,
+	OFFSET_SHAPE = 0xfff,
+	OFFSET_HFIFO_DATA = 0xfff,
+	OFFSET_ERROR = 0xfff,
+	OFFSET_DELAY_STEP = 0xfff,
+	OFFSET_DELAY_SAMPLE = 0xfff,
+	OFFSET_DMA_INFO = 0xfff,
+	OFFSET_IRQ_INFO = 0xfff,
+	OFFSET_DMA_FSM_DEBUG = 0xfff,
+	OFFSET_HFIFO_STAT = 0xfff,
+	OFFSET_MULTI_DMA = 0xfff,
+	OFFSET_ROLLBACK = 0xfff,
+};
+
+enum I2C_REGS_OFFSET_V2 {
+	V2_OFFSET_DATA_PORT = 0x0,
+	V2_OFFSET_SLAVE_ADDR = 0x04,
+	V2_OFFSET_INTR_MASK = 0x08,
+	V2_OFFSET_INTR_STAT = 0x0c,
+	V2_OFFSET_CONTROL = 0x10,
+	V2_OFFSET_TRANSFER_LEN = 0x14,
+	V2_OFFSET_TRANSAC_LEN = 0x18,
+	V2_OFFSET_DELAY_LEN = 0x1c,
+	V2_OFFSET_TIMING = 0x20,
+	V2_OFFSET_START = 0x24,
+	V2_OFFSET_EXT_CONF = 0x28,
+	V2_OFFSET_LTIMING = 0x2c,
+	V2_OFFSET_FIFO_ADDR_CLR = 0x38,
+	V2_OFFSET_SOFTRESET = 0x50,
+
+	/* v2 use different offset */
+	V2_OFFSET_HS = 0x30,
+	V2_OFFSET_IO_CONFIG = 0x34,
+	V2_OFFSET_TRANSFER_LEN_AUX = 0x44,
+	V2_OFFSET_CLOCK_DIV = 0x48,
+	V2_OFFSET_HW_TIMEOUT = 0x4c,
+	V2_OFFSET_DEBUGSTAT = 0xe4,
+	V2_OFFSET_DEBUGCTRL = 0xe8,
+	V2_OFFSET_FIFO_STAT = 0xf4,
+	V2_OFFSET_FIFO_THRESH = 0xf8,
+	V2_OFFSET_AED_PATCH = 0x80,
+
+	/* v2 add */
+	V2_OFFSET_MCU_INTR = 0x40,
+	V2_OFFSET_TRAFFIC = 0x54,
+	V2_OFFSET_COMMAND = 0x58,
+	V2_OFFSET_CRC_CODE_ = 0x5c,
+	V2_OFFSET_TERNARY = 0x60,
+	V2_OFFSET_IBI_TIMING = 0x64,
+	V2_OFFSET_SHAPE = 0x6c,
+	V2_OFFSET_HFIFO_DATA = 0x70,
+	V2_OFFSET_ERROR = 0x84,
+	V2_OFFSET_DELAY_STEP = 0xd4,
+	V2_OFFSET_DELAY_SAMPLE = 0xd8,
+	V2_OFFSET_DMA_INFO = 0xdc,
+	V2_OFFSET_IRQ_INFO = 0xe0,
+	V2_OFFSET_DMA_FSM_DEBUG = 0xec,
+	V2_OFFSET_HFIFO_STAT = 0xfc,
+	V2_OFFSET_MULTI_DMA = 0xf8c,
+	V2_OFFSET_ROLLBACK = 0xf98,
+
+	/* not in v2 */
+	V2_OFFSET_DCM_EN = 0xfff,/*0x54*/
+	V2_OFFSET_PATH_DIR = 0xfff,/*0x60*/
+};
+
+struct i2c_info {
+	unsigned int slave_addr;
+	unsigned int intr_stat;
+	unsigned int control;
+	unsigned int fifo_stat;
+	unsigned int debug_stat;
+	unsigned int tmo;
+	unsigned long long end_time;
+};
+
+enum PERICFG_OFFSET {
+	OFFSET_PERI_I2C_MODE_ENABLE = 0x0410,
+};
+
+struct mt_i2c_data {
+	unsigned int clk_frequency;	/* bus speed in Hz */
+	unsigned int flags;
+	unsigned int clk_src_div;
+};
+
+struct i2c_dma_buf {
+	u8 *vaddr;
+	dma_addr_t paddr;
+};
+
+struct mt_i2c_ext {
+#define I2C_A_FILTER_MSG	0x00000001
+	bool isEnable;
+	bool isFilterMsg;
+	bool is_ch_offset;
+	u32 timing;
+	u16 ch_offset;
+	u16 ch_offset_dma;
+};
+
+struct mtk_i2c_compatible {
+	unsigned char dma_support;
+	/* 0 : original; 1: 4gb  support 2: 33bit support; 3: 36 bit support */
+	unsigned char idvfs_i2c;
+	/* compatible before chip, set 1 if no TRANSFER_LEN_AUX */
+	unsigned char set_dt_div;/* use dt to set div */
+	unsigned char check_max_freq;/* check max freq */
+	unsigned char set_ltiming;/* need to set LTIMING */
+	unsigned char set_aed;/* need to set AED */
+	unsigned char ver;/* controller version */
+	/* for constraint of SAMPLE_CNT_DIV and STEP_CNT_DIV of mt6765 */
+	/* 1, has-a-constraint; 0, no constraint */
+	unsigned char cnt_constraint;
+	u16 ext_time_config;
+	char clk_compatible[128];
+	u16 clk_sta_offset[I2C_MAX_CHANNEL];/* I2C clock status register */
+	u8 cg_bit[I2C_MAX_CHANNEL];/* i2c clock bit */
+	u32 clk_sel_offset;
+	u32 arbit_offset;
+};
+
+struct mt_i2c {
+	struct i2c_adapter adap;/* i2c host adapter */
+	struct device *dev;
+	wait_queue_head_t wait;/* i2c transfer wait queue */
+	/* set in i2c probe */
+	void __iomem *base;/* i2c base addr */
+	void __iomem *pdmabase;/* dma base address*/
+	void __iomem *gpiobase;/* gpio base address */
+	int irqnr;	/* i2c interrupt number */
+	int id;
+	int scl_gpio_id; /* SCL GPIO number */
+	int sda_gpio_id; /* SDA GPIO number */
+	unsigned int gpio_start;
+	unsigned int mem_len;
+	unsigned int offset_eh_cfg;
+	unsigned int offset_pu_cfg;
+	unsigned int offset_rsel_cfg;
+	struct i2c_dma_buf dma_buf;/* memory alloc for DMA mode */
+	struct clk *clk_main;/* main clock for i2c bus */
+	struct clk *clk_dma;/* DMA clock for i2c via DMA */
+	struct clk *clk_pmic;/* PMIC clock for i2c from PMIC */
+	struct clk *clk_arb;/* Arbitrator clock for i2c */
+	struct clk *clk_pal;
+	bool have_pmic;/* can use i2c pins form PMIC */
+	bool have_dcm;/* HW DCM function */
+	bool use_push_pull;/* IO config push-pull mode */
+	bool appm;/* I2C for APPM */
+	bool gpupm;/* I2C for GPUPM */
+	bool buffermode;	/* I2C Buffer mode support */
+	bool hs_only;	/* I2C HS only */
+	/* set when doing the transfer */
+	u16 irq_stat;	/* interrupt status */
+	u16 i3c_en;     /* i3c enalbe */
+	unsigned int speed_hz;/* The speed in transfer */
+	unsigned int clk_src_div;
+	unsigned int aed;/* aed value from dt */
+	spinlock_t cg_lock;
+	int cg_cnt;
+	bool trans_stop;/* i2c transfer stop */
+	enum mt_trans_op op;
+	u16 total_len;
+	u16 msg_len;
+	u8 *msg_buf;	/* pointer to msg data */
+	u16 msg_aux_len;/* WRRD mode to set AUX_LEN register */
+	u16 addr;/* 7bit slave address, without read/write bit */
+	u16 timing_reg;
+	u16 ltiming_reg;
+	u16 high_speed_reg;
+	u16 clk_sta_offset;
+	u8 cg_bit;
+	bool is_hw_trig;
+	bool is_ccu_trig;
+	bool suspended;
+	int rec_idx;/* next record idx */
+	u32 ch_offset_default;
+	u32 ch_offset;
+	u32 ch_offset_dma_default;
+	u32 ch_offset_dma;
+	bool skip_scp_sema;
+	bool has_ccu;
+	u32 ccu_offset;
+	unsigned long main_clk;
+	struct mutex i2c_mutex;
+	struct mt_i2c_ext ext_data;
+	const struct mtk_i2c_compatible *dev_comp;
+	struct i2c_info rec_info[I2C_RECORD_LEN];
+};
+
+#if defined(CONFIG_MTK_FPGA) || defined(CONFIG_FPGA_EARLY_PORTING)
+#define CONFIG_MT_I2C_FPGA_ENABLE
+#endif
+
+#if (defined(CONFIG_MT_I2C_FPGA_ENABLE))
+#define FPGA_CLOCK		12000/* FPGA crystal frequency (KHz) */
+#define I2C_CLK_DIV		(5)/* frequency divider */
+#define I2C_CLK_RATE	((FPGA_CLOCK / I2C_CLK_DIV) * 1000)
+/* Hz for FPGA I2C work frequency */
+#endif
+
+/* extern void gpio_dump_regs_range(int start, int end); */
+extern void i2c_dump_info(struct mt_i2c *i2c);
+#if defined(CONFIG_MTK_GIC_EXT)
+extern void mt_irq_dump_status(unsigned int irq);
+#endif
+extern unsigned int enable_4G(void);
+extern int mtk_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+					int num, u32 ext_flag, u32 timing);
+extern void mt_irq_dump_status(unsigned int irq);
+extern int hw_trig_i2c_enable(struct i2c_adapter *adap);
+extern int hw_trig_i2c_disable(struct i2c_adapter *adap);
+extern int hw_trig_i2c_transfer(struct i2c_adapter *adap,
+					struct i2c_msg *msgs, int num);
+extern int i2c_ccu_enable(struct i2c_adapter *adap, u16 ch_offset);
+extern int i2c_ccu_disable(struct i2c_adapter *adap);
+
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk_debug.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk_debug.c
new file mode 100644
index 0000000..43a6c1a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mtk_debug.c
@@ -0,0 +1,913 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Ranrn.Lu <ranran.lu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include "i2c-mtk.h"
+#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#define PROC_NAME_OF_I2C_DEBUG "i2c_debug"
+/* filer out error messages     */
+
+static char data_buffer[256 * 4];
+unsigned long long t3, t4, t5, t6;
+
+static inline void i2c_writew_d(struct mt_i2c *i2c, u8 offset, u16 value)
+{
+	writew(value, (void *)((i2c->base) + (offset)));
+}
+
+static inline u16 i2c_readw_d(struct mt_i2c *i2c, u8 offset)
+{
+	return readw((void const *)((i2c->base) + (offset)));
+}
+
+int mt_i2c_test(int id, int addr)
+{
+	int ret = 0;
+	/* ret = i2c_trans_data(id, addr, buffer,,buffer, 1, 1, 0); */
+	return ret;
+}
+EXPORT_SYMBOL(mt_i2c_test);
+
+int mt_i2c_test_multi_wr(int id, int addr)
+{
+	int ret;
+	struct i2c_msg msg[12];
+	struct i2c_adapter *adap;
+	char buf0[3] = {0x55, 0x00, 0x01};
+	char buf1[3] = {0x55, 0x01, 0x02};
+	char buf2[3] = {0x55, 0x02, 0x03};
+	char buf3[3] = {0x55, 0x03, 0x04};
+	char buf4[2] = {0x55, 0x00};
+	char buf5[2] = {0xff, 0xff};
+	char buf6[2] = {0x55, 0x01};
+	char buf7[2] = {0xff, 0xff};
+	char buf8[2] = {0x55, 0x02};
+	char buf9[2] = {0xff, 0xff};
+	char buf10[2] = {0x55, 0x03};
+	char buf11[2] = {0xff, 0xff};
+
+	adap = i2c_get_adapter(id);
+	if (!adap)
+		return -1;
+
+	msg[0].addr = addr;
+	msg[0].flags = 0;
+	msg[0].len = 3;
+	msg[0].buf = buf0;
+	msg[1].addr = addr;
+	msg[1].flags = 0;
+	msg[1].len = 3;
+	msg[1].buf = buf1;
+	msg[2].addr = addr;
+	msg[2].flags = 0;
+	msg[2].len = 3;
+	msg[2].buf = buf2;
+	msg[3].addr = addr;
+	msg[3].flags = 0;
+	msg[3].len = 3;
+	msg[3].buf = buf3;
+	msg[4].addr = addr;
+	msg[4].flags = 0;
+	msg[4].len = 2;
+	msg[4].buf = buf4;
+	msg[5].addr = addr;
+	msg[5].flags = I2C_M_RD;
+	msg[5].len = 1;
+	msg[5].buf = buf5;
+	msg[6].addr = addr;
+	msg[6].flags = 0;
+	msg[6].len = 2;
+	msg[6].buf = buf6;
+	msg[7].addr = addr;
+	msg[7].flags = I2C_M_RD;
+	msg[7].len = 1;
+	msg[7].buf = buf7;
+	msg[8].addr = addr;
+	msg[8].flags = 0;
+	msg[8].len = 2;
+	msg[8].buf = buf8;
+	msg[9].addr = addr;
+	msg[9].flags = I2C_M_RD;
+	msg[9].len = 1;
+	msg[9].buf = buf9;
+	msg[10].addr = addr;
+	msg[10].flags = 0;
+	msg[10].len = 2;
+	msg[10].buf = buf10;
+	msg[11].addr = addr;
+	msg[11].flags = I2C_M_RD;
+	msg[11].len = 1;
+	msg[11].buf = buf11;
+	hw_trig_i2c_enable(adap);
+	ret = hw_trig_i2c_transfer(adap, msg, 4);
+	hw_trig_i2c_disable(adap);
+	pr_info("camera  0x5500 : %x 0x5501 : %x 0x5502 : %x 0x5503 : %x .\n",
+		buf5[0], buf7[0], buf9[0], buf11[0]);
+	return ret;
+}
+
+int mt_i2c_test_wrrd(int id, int addr, int wr_len, int rd_len,
+		     char *wr_buf, char *rd_buf, unsigned int speedhz)
+{
+
+	int ret,ii;
+	struct i2c_msg msg[2];
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+	unsigned int origin_speed = 0;
+
+	adap = i2c_get_adapter(id);
+	if (!adap)
+		return -1;
+
+	i2c = container_of(adap, struct mt_i2c, adap);
+	if (speedhz) {
+		origin_speed = i2c->speed_hz;
+		i2c->speed_hz = speedhz;
+	}
+
+	msg[0].addr = addr;
+	msg[0].flags = 0;
+	msg[0].len = wr_len;
+	msg[0].buf = wr_buf;
+	/*
+	 * for(i = 0; i < wr_len; i++) {
+	 *  printk("cxd wr_len = %d i2c_trans_data-%d = 0x%x\n",
+	 *	   wr_len, i, wr_buf[i]);
+	 * }
+	 */
+	msg[1].addr = addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = rd_len;
+	msg[1].buf = rd_buf;
+
+	ret = i2c_transfer(adap, &msg[0], 2);
+	
+	  printk("cxd i2c_trans_ret = %d\n", ret);
+	  for(ii = 0; ii<rd_len; ii++)
+	 	printk("cxd i2c_trans_data-%d = 0x%x\n", ii, rd_buf[ii]);
+	 
+	if (origin_speed)
+		i2c->speed_hz = origin_speed;
+
+	return ret;
+
+}
+
+static ssize_t show_config(struct device *dev, struct device_attribute *attr,
+			   char *buff)
+{
+	int len = strlen(data_buffer);
+
+	pr_info("Usage echo \"[bus_id] [address] [operation] [w_count]\n"
+		"[r_count] [data]\" > ut\n");
+	memcpy(buff, data_buffer, len);
+	pr_info("Return Value:%s\n\n", data_buffer);
+	return len;
+}
+
+static int pows(int x, int y)
+{
+	int result = 1;
+
+	while (y--)
+		result *= x;
+	return result;
+}
+
+int string2hex(const char *buffer, int cnt)
+{
+	int c = 0;
+	char t = 0;
+	int count = cnt;
+
+	while (count--) {
+		t = *(buffer + cnt - count - 1);
+		if (t >= 'A' && t <= 'F')
+			c += ((t - 'A') + 10) * pows(16, count);
+			else if (t >= 'a' && t <= 'f')		
+			c += ((t - 'a') + 10) * pows(16, count);	
+		else if (t >= '0' && t <= '9')
+			c += (t - '0') * pows(16, count);
+		else
+			c = -1;
+	}
+	return c;
+}
+
+char *get_hexbuffer(char *data_buffer, char *hex_buffer)
+{
+	char *ptr = data_buffer;
+	int index = 0;
+
+	while (*ptr && *++ptr) {
+		*(hex_buffer + index++) = string2hex(ptr - 1, 2);
+		ptr++;
+	}
+	*(hex_buffer + index) = 0;
+	return hex_buffer;
+}
+
+int i2c_trans_data(int bus_id, int address, char *buf_wr, char *buf_rd,
+		   int operation, int len_wr, int len_rd, unsigned int speedhz)
+{
+	int ret;
+
+	struct i2c_msg msg;
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+	unsigned int origin_speed = 0;
+	bool origin_gpio_mode;
+
+	adap = i2c_get_adapter(bus_id);
+	if (!adap)
+		return -1;
+
+	i2c = container_of(adap, struct mt_i2c, adap);
+	if (speedhz) {
+		origin_speed = i2c->speed_hz;
+		i2c->speed_hz = speedhz;
+		if (speedhz > MAX_FS_PLUS_MODE_SPEED) {
+			origin_gpio_mode = i2c->use_push_pull;
+			i2c->use_push_pull = true;
+		}
+	}
+
+	msg.addr = address;
+	if (operation == 2) {
+		msg.flags = I2C_M_RD;
+		msg.len = len_rd;
+		msg.buf = (char *)buf_rd;
+	} else {
+		msg.flags = 0;
+		msg.len = len_wr;
+		msg.buf = (char *)buf_wr;
+	}
+	ret = i2c_transfer(adap, &msg, 1);
+	/*
+	 *if(ret > 0) {
+	 *	for(i = 0; i<msg.len; i++)
+	 *		printk("cxd i2c_trans_data-%d = 0x%x\n",
+	 *		       i, msg.buf[i]);
+	 *
+	 *}
+	 */
+	if (origin_speed)
+		i2c->speed_hz = origin_speed;
+	if (speedhz > MAX_FS_PLUS_MODE_SPEED)
+		i2c->use_push_pull = origin_gpio_mode;
+
+	i2c_put_adapter(adap);
+	return (ret == 1) ? msg.len : ret;
+}
+
+/* extern mt_i2c ; */
+static int i2c_test_reg(int bus_id, int val)
+{
+	int ret = 0;
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+
+	adap = i2c_get_adapter(bus_id);
+	if (!adap)
+		return -1;
+	i2c = container_of(adap, struct mt_i2c, adap);
+	/* printk("I2C%d base address %8x\n", bus_id,
+	 *	  (unsigned int)(i2c->base));
+	 */
+	/* write i2c writable register with 0 */
+	i2c_writew_d(i2c, OFFSET_SLAVE_ADDR, val);
+	i2c_writew_d(i2c, OFFSET_INTR_MASK, val);
+	i2c_writew_d(i2c, OFFSET_INTR_STAT, val);
+	i2c_writew_d(i2c, OFFSET_CONTROL, val);
+	i2c_writew_d(i2c, OFFSET_TRANSFER_LEN, val);
+	i2c_writew_d(i2c, OFFSET_TRANSAC_LEN, val);
+	i2c_writew_d(i2c, OFFSET_DELAY_LEN, val);
+	i2c_writew_d(i2c, OFFSET_TIMING, val);
+	i2c_writew_d(i2c, OFFSET_EXT_CONF, val);
+	i2c_writew_d(i2c, OFFSET_IO_CONFIG, val);
+	i2c_writew_d(i2c, OFFSET_HS, val);
+	/* If everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	i2c_put_adapter(adap);
+	return ret;
+}
+
+static int i2c_soft_reset(int bus_id)
+{
+	int ret = 0;
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+
+	adap = i2c_get_adapter(bus_id);
+	if (!adap)
+		return -1;
+	i2c = container_of(adap, struct mt_i2c, adap);
+	/* printk("I2C%d base address %8x\n", bus_id,
+	 *	  (unsigned int)(i2c->base));
+	 */
+	/* write i2c writable register with 0 */
+	i2c_writew_d(i2c, OFFSET_SOFTRESET, 1);
+	/* If everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	i2c_put_adapter(adap);
+	return ret;
+}
+
+static int i2c_ext_conf_test(int bus_id, int val)
+{
+	int ret = 0;
+	struct i2c_adapter *adap;
+	struct mt_i2c *i2c;
+
+	adap = i2c_get_adapter(bus_id);
+	if (!adap)
+		return -1;
+	i2c = container_of(adap, struct mt_i2c, adap);
+	/* printk("I2C%d base address %8x\n", bus_id,
+	 * (unsigned int)(i2c->base));
+	 */
+	/* write i2c writable register with 0 */
+	i2c_writew_d(i2c, OFFSET_EXT_CONF, val);
+	/* printk("EXT_CONF 0x%x", i2c_readw_d(i2c, OFFSET_EXT_CONF)); */
+	/* If everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	i2c_put_adapter(adap);
+	return ret;
+}
+
+static void hex2string(unsigned char *in, unsigned char *out, int length)
+{
+	unsigned char *ptr = in;
+	unsigned char *ptrout = out;
+	unsigned char t;
+
+	while (length--) {
+		t = (*ptr & 0xF0) >> 4;
+		if (t < 10)
+			*ptrout = t + '0';
+		else
+			*ptrout = t + 'A' - 10;
+
+		ptrout++;
+
+		t = (*ptr & 0x0F);
+		if (t < 10)
+			*ptrout = t + '0';
+		else
+			*ptrout = t + 'A' - 10;
+
+		ptr++;
+		ptrout++;
+	}
+	*ptrout = 0;
+}
+
+unsigned long long fail_time;
+static ssize_t set_config(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	int bus_id;
+	int address;
+	int operation;
+	int wr_number = 0;
+	int rd_number = 0;
+	unsigned int speedhz = 0;
+	char *buf_test;
+
+	int length = 0;
+	void *vir_addr_wr = NULL;
+	void *vir_addr_rd = NULL;
+	/* int status; */
+	int ret = 0;
+	int scanf_ret = 0;
+	unsigned char tmpbuffer[128];
+
+	pr_info("%s\n", buf);
+	scanf_ret = sscanf(buf, "%d %x %d %d %d %d %1023s",
+			   &bus_id, &address, &operation,
+			   &wr_number, &rd_number, &speedhz,
+			   data_buffer);
+	if (scanf_ret) {
+		pr_info("bus_id:%d,address:%x,operation:0x%x, speed:%d\n",
+		       bus_id, address, operation, speedhz);
+		if ((address != 0) && (operation <= 2)) {
+			length = strlen(data_buffer);
+
+			if (operation == 1) {
+				if ((length >> 1) != wr_number)
+					pr_info("Error length of data number = %d,length = %d\n",
+					       wr_number, length >> 1);
+				vir_addr_wr = kzalloc(wr_number, GFP_KERNEL);
+				if (vir_addr_wr == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				get_hexbuffer(data_buffer, vir_addr_wr);
+				pr_info("data_buffer:%s\n", data_buffer);
+
+
+			}
+			if (operation == 2) {
+				vir_addr_rd = kzalloc(rd_number, GFP_KERNEL);
+				if (vir_addr_rd == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+			}
+			if (operation == 0) {
+				vir_addr_wr = kzalloc(wr_number, GFP_KERNEL);
+				if (vir_addr_wr == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				vir_addr_rd = kzalloc(rd_number, GFP_KERNEL);
+				if (vir_addr_rd == NULL) {
+					kfree(vir_addr_wr);
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				get_hexbuffer(data_buffer, vir_addr_wr);
+				pr_info("data_buffer:%s\n", data_buffer);
+			}
+
+			if (operation == 0) {	/* 0:WRRD 1:WR 2:RD */
+				t3 = sched_clock();
+				/* while (1) { */
+				/*	msleep(500);*/
+				ret = mt_i2c_test_wrrd(bus_id, address,
+						       wr_number,
+						       rd_number,
+						       vir_addr_wr,
+						       vir_addr_rd, speedhz);
+				/* buf_test = (char *)vir_addr_rd;
+				 *   if (buf_test[0] != 0x75) {
+				 *	fail_time++;
+				 *	pr_info("I2C press fail_time=%llu\n",
+				 *		fail_time);
+				 *   }
+				 *  }
+				 */
+				t4 = sched_clock();
+				/* pr_info("test i2c wr-rd:hw time=%llu,
+				 *	   total=%llu\n", t2-t1, t4-t3);
+				 */
+			} else {
+				t5 = sched_clock();
+				ret = i2c_trans_data(bus_id, address,
+						     vir_addr_wr, vir_addr_rd,
+						     operation, wr_number,
+						     rd_number, speedhz);
+				buf_test = (char *)vir_addr_rd;
+
+				t6 = sched_clock();
+		/* pr_info("test i2c :hw time=%llu,total=%llu\n",
+		 *	   t2-t1, t6-t5);
+		 */
+			}
+			/* dealing */
+
+			if (ret >= 0) {
+				if (operation == 2) {
+					hex2string(vir_addr_rd, tmpbuffer,
+						   rd_number);
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", tmpbuffer);
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+				} else if (operation == 0) {
+					hex2string(vir_addr_rd, tmpbuffer,
+						   rd_number);
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", tmpbuffer);
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+					if (strncmp(tmpbuffer, "68", 1)) {
+						fail_time++;
+						pr_info("data_buffer != 68, fail time=%llu\n",
+							fail_time);
+					}
+				} else {
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", "00");
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+				}
+
+			} else if (ret < 0) {
+				if (ret == -EINVAL)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Invalid Parameter");
+				else if (ret == -ETIMEDOUT)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Transfer Timeout");
+				else if (ret == -EREMOTEIO)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Ack Error");
+				else
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "unknown error");
+				pr_info("Actual return Value:%d %p\n", ret,
+					data_buffer);
+			}
+			kfree(vir_addr_rd);
+			kfree(vir_addr_wr);
+
+		} else {
+			struct i2c_adapter *adap = i2c_get_adapter(bus_id);
+
+			if (adap) {
+				struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+				if (operation == 3) {
+					i2c_dump_info(i2c);
+				} else if (operation == 4) {
+					i2c_test_reg(bus_id, 0);
+					i2c_dump_info(i2c);
+					i2c_test_reg(bus_id, 0xFFFFFFFF);
+					i2c_dump_info(i2c);
+				} else if (operation == 5) {
+					i2c_ext_conf_test(bus_id, address);
+				} else if (operation == 9) {
+					i2c_soft_reset(bus_id);
+					i2c_dump_info(i2c);
+				} else if (operation == 6) {
+					mt_i2c_test_multi_wr(bus_id, address);
+					if (bus_id == 0) {
+					 /* I2C0 PINMUX2 power on */
+					 /* hwPowerOn(MT65XX_POWER_LDO_VMC1,
+					  *	      VOL_DEFAULT,
+					  *	      "i2c_pinmux");
+					  */
+					 /* hwPowerOn(MT65XX_POWER_LDO_VMCH1,
+					  *	      VOL_DEFAULT,
+					  *	      "i2c_pinmux");
+					  */
+					}
+
+				} else if (operation == 7) {
+					mt_i2c_test(1, 0x50);
+				} else {
+					pr_info("i2c debug system: Parameter invalid!\n");
+				}
+			} else {
+				/*adap invalid */
+				pr_info("i2c debug system: get adap fail!\n");
+			}
+		}
+	} else {
+		/*parameter invalid */
+		pr_info("i2c debug system: Parameter invalid!\n");
+	}
+
+	return count;
+ err:
+	pr_info("analyze failed\n");
+	return -1;
+}
+
+static DEVICE_ATTR(ut, 0660, show_config, set_config);
+static ssize_t i2c_debug_write(struct file *filp, const char __user *buff, size_t count, loff_t *data)
+{
+	int bus_id;
+	int address;
+	int operation;
+	int wr_number = 0;
+	int rd_number = 0;
+	unsigned int speedhz = 0;
+	char *buf_test;
+unsigned char buf[1024] = {'\0'};
+  int copybufsize = 0;
+	int length = 0;
+	void *vir_addr_wr = NULL;
+	void *vir_addr_rd = NULL;
+	/* int status; */
+	int ret = 0;
+	int scanf_ret = 0;
+	unsigned char tmpbuffer[128];
+	pr_info("i2c_debug_write\n");
+	pr_info("%s\n", buf);
+	copybufsize = (count<(sizeof(buf)%sizeof(buf[0])-1)) ? count :(sizeof(buf)%sizeof(buf[0])-1);
+	  if (copy_from_user(&buf, buff, copybufsize)) 
+    {
+        printk("[n5600_proc] copy from user error\n");
+        return -EFAULT;
+    }  
+	scanf_ret = sscanf(buf, "%d %x %d %d %d %d %1023s",
+			   &bus_id, &address, &operation,
+			   &wr_number, &rd_number, &speedhz,
+			   data_buffer);
+ pr_info("i2c_debug_write scanf_ret=%d\n",scanf_ret);
+	if (scanf_ret) {
+		pr_info("bus_id:%d,address:%x,operation:0x%x, speed:%d\n",
+		       bus_id, address, operation, speedhz);
+		if ((address != 0) && (operation <= 2)) {
+			length = strlen(data_buffer);
+
+			if (operation == 1) {
+				if ((length >> 1) != wr_number)
+					pr_info("Error length of data number = %d,length = %d\n",
+					       wr_number, length >> 1);
+				vir_addr_wr = kzalloc(wr_number, GFP_KERNEL);
+				if (vir_addr_wr == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				get_hexbuffer(data_buffer, vir_addr_wr);
+				pr_info("data_buffer:%s\n", data_buffer);
+
+
+			}
+			if (operation == 2) {
+				vir_addr_rd = kzalloc(rd_number, GFP_KERNEL);
+				if (vir_addr_rd == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+			}
+			if (operation == 0) {
+				vir_addr_wr = kzalloc(wr_number, GFP_KERNEL);
+				if (vir_addr_wr == NULL) {
+
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				vir_addr_rd = kzalloc(rd_number, GFP_KERNEL);
+				if (vir_addr_rd == NULL) {
+					kfree(vir_addr_wr);
+					pr_info("alloc virtual memory failed\n");
+					goto err;
+				}
+				get_hexbuffer(data_buffer, vir_addr_wr);
+				pr_info("data_buffer:%s\n", data_buffer);
+			}
+
+			if (operation == 0) {	/* 0:WRRD 1:WR 2:RD */
+				t3 = sched_clock();
+				/* while (1) { */
+				/*	msleep(500);*/
+				ret = mt_i2c_test_wrrd(bus_id, address,
+						       wr_number,
+						       rd_number,
+						       vir_addr_wr,
+						       vir_addr_rd, speedhz);
+				/* buf_test = (char *)vir_addr_rd;
+				 *   if (buf_test[0] != 0x75) {
+				 *	fail_time++;
+				 *	pr_info("I2C press fail_time=%llu\n",
+				 *		fail_time);
+				 *   }
+				 *  }
+				 */
+				t4 = sched_clock();
+				/* pr_info("test i2c wr-rd:hw time=%llu,
+				 *	   total=%llu\n", t2-t1, t4-t3);
+				 */
+			} else {
+				t5 = sched_clock();
+				ret = i2c_trans_data(bus_id, address,
+						     vir_addr_wr, vir_addr_rd,
+						     operation, wr_number,
+						     rd_number, speedhz);
+				buf_test = (char *)vir_addr_rd;
+
+				t6 = sched_clock();
+		/* pr_info("test i2c :hw time=%llu,total=%llu\n",
+		 *	   t2-t1, t6-t5);
+		 */
+			}
+			/* dealing */
+
+			if (ret >= 0) {
+				if (operation == 2) {
+					hex2string(vir_addr_rd, tmpbuffer,
+						   rd_number);
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", tmpbuffer);
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+				} else if (operation == 0) {
+					hex2string(vir_addr_rd, tmpbuffer,
+						   rd_number);
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", tmpbuffer);
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+					if (strncmp(tmpbuffer, "68", 1)) {
+						fail_time++;
+						pr_info("data_buffer != 68, fail time=%llu\n",
+							fail_time);
+					}
+				} else {
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "1 %s", "00");
+					pr_info("Actual return Value:%d %s\n",
+						ret, data_buffer);
+				}
+
+			} else if (ret < 0) {
+				if (ret == -EINVAL)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Invalid Parameter");
+				else if (ret == -ETIMEDOUT)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Transfer Timeout");
+				else if (ret == -EREMOTEIO)
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "Ack Error");
+				else
+					snprintf(data_buffer,
+						 sizeof(data_buffer),
+						 "0 %s", "unknown error");
+				pr_info("Actual return Value:%d %p\n", ret,
+					data_buffer);
+			}
+			kfree(vir_addr_rd);
+			kfree(vir_addr_wr);
+
+		} else {
+			struct i2c_adapter *adap = i2c_get_adapter(bus_id);
+
+			if (adap) {
+				struct mt_i2c *i2c = i2c_get_adapdata(adap);
+
+				if (operation == 3) {
+					i2c_dump_info(i2c);
+				} else if (operation == 4) {
+					i2c_test_reg(bus_id, 0);
+					i2c_dump_info(i2c);
+					i2c_test_reg(bus_id, 0xFFFFFFFF);
+					i2c_dump_info(i2c);
+				} else if (operation == 5) {
+					i2c_ext_conf_test(bus_id, address);
+				} else if (operation == 9) {
+					i2c_soft_reset(bus_id);
+					i2c_dump_info(i2c);
+				} else if (operation == 6) {
+					mt_i2c_test_multi_wr(bus_id, address);
+					if (bus_id == 0) {
+					 /* I2C0 PINMUX2 power on */
+					 /* hwPowerOn(MT65XX_POWER_LDO_VMC1,
+					  *	      VOL_DEFAULT,
+					  *	      "i2c_pinmux");
+					  */
+					 /* hwPowerOn(MT65XX_POWER_LDO_VMCH1,
+					  *	      VOL_DEFAULT,
+					  *	      "i2c_pinmux");
+					  */
+					}
+
+				} else if (operation == 7) {
+					mt_i2c_test(1, 0x50);
+				} else {
+					pr_info("i2c debug system: Parameter invalid!\n");
+				}
+			} else {
+				/*adap invalid */
+				pr_info("i2c debug system: get adap fail!\n");
+			}
+		}
+	} else {
+		/*parameter invalid */
+		pr_info("i2c debug system: Parameter invalid!\n");
+	}
+
+	return count;
+ err:
+	pr_info("analyze failed\n");
+	return -1;
+
+}
+//static ssize_t show_config(struct device *dev, struct device_attribute *attr,char *buff)
+static ssize_t i2c_debug_read(struct file *file, char __user *page, size_t count, loff_t *ppos)
+{
+	
+		int len = strlen(data_buffer);
+
+	pr_info("Usage echo \"[bus_id] [address] [operation] [w_count]\n"
+		"[r_count] [data]\" > ut\n");
+	//memcpy(buff, data_buffer, len);
+	copy_to_user(page, data_buffer, len);
+	pr_info("Return Value:%s\n\n", data_buffer);
+	return len;
+}
+#if 0	
+ int ret = 0;
+//int len = 0;
+  unsigned char buf[100] = {0};
+	int len = 0;
+		unsigned int bufLen = PAGE_SIZE;
+		unsigned int i = 135;
+	//	struct mtk_pinctrl *hw_file = dev_get_drvdata(dev_file);
+	//	struct gpio_chip *chip_file;
+		pr_info("zz [pinctrl] i2c_debug_read! read_gpio=%d\n",read_gpio);
+		if (!hw_file) {
+			pr_debug("[pinctrl] Err: NULL pointer!\n");
+			return len;
+		}
+	
+		chip_file = &hw_file->chip;	
+			len += mtk_pctrl_show_one_pin(hw_file, read_gpio, buf + len, bufLen - len);
+			pr_info("zz11 [pinctrl]  mtk_pctrl_show_one_pin %s\n",buf); 
+	//	}
+	if (copy_to_user(page, buf, len))
+    {
+		pr_info("zz11 [pinctrl]  mtk_pctrl_show_one_pin %s\n",page); 
+      len =  - EFAULT;
+    }
+		pr_info("zz [pinctrl] i2c_debug_read! end\n");
+		return len;
+}
+#endif
+static const struct file_operations i2c_debug_fops = {
+	.owner = THIS_MODULE,
+	.read = i2c_debug_read,
+	.write = i2c_debug_write,
+};
+static int i2c_common_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	int ret = 0;
+	/* your code here\A3\ACyour should save client in your own way */
+	pr_info("i2c_common device probe\n");
+	ret = device_create_file(&client->dev, &dev_attr_ut);
+	proc_create(PROC_NAME_OF_I2C_DEBUG, 0777, NULL, &i2c_debug_fops);
+	pr_info("i2c_common device probe ret = %d\n", ret);
+	return ret;
+}
+
+static int i2c_common_remove(struct i2c_client *client)
+{
+	int ret = 0;
+	/* your code here */
+	device_remove_file(&client->dev, &dev_attr_ut);
+	return ret;
+}
+
+static const struct i2c_device_id i2c_common_test_id[] = {
+	{"mtk-iicd", 0},
+	{},
+};
+
+static const struct of_device_id i2c_common_of_match[] = {
+	{.compatible = "mediatek,mtk-iicd"},
+	{},
+};
+
+static struct i2c_driver i2c_common_driver = {
+	.driver = {
+		.name = "mtk-iicd",
+		.of_match_table = i2c_common_of_match,
+	},
+	.probe = i2c_common_probe,
+	.remove = i2c_common_remove,
+	.id_table = i2c_common_test_id,
+};
+module_i2c_driver(i2c_common_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MediaTek I2C Bus Driver Test Driver");
+MODULE_AUTHOR("Ranran Lu");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mv64xxx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mv64xxx.c
new file mode 100644
index 0000000..b0fb978
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mv64xxx.c
@@ -0,0 +1,1012 @@
+/*
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#define MV64XXX_I2C_ADDR_ADDR(val)			((val & 0x7f) << 1)
+#define MV64XXX_I2C_BAUD_DIV_N(val)			(val & 0x7)
+#define MV64XXX_I2C_BAUD_DIV_M(val)			((val & 0xf) << 3)
+
+#define	MV64XXX_I2C_REG_CONTROL_ACK			BIT(2)
+#define	MV64XXX_I2C_REG_CONTROL_IFLG			BIT(3)
+#define	MV64XXX_I2C_REG_CONTROL_STOP			BIT(4)
+#define	MV64XXX_I2C_REG_CONTROL_START			BIT(5)
+#define	MV64XXX_I2C_REG_CONTROL_TWSIEN			BIT(6)
+#define	MV64XXX_I2C_REG_CONTROL_INTEN			BIT(7)
+
+/* Ctlr status values */
+#define	MV64XXX_I2C_STATUS_BUS_ERR			0x00
+#define	MV64XXX_I2C_STATUS_MAST_START			0x08
+#define	MV64XXX_I2C_STATUS_MAST_REPEAT_START		0x10
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK		0x18
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK		0x20
+#define	MV64XXX_I2C_STATUS_MAST_WR_ACK			0x28
+#define	MV64XXX_I2C_STATUS_MAST_WR_NO_ACK		0x30
+#define	MV64XXX_I2C_STATUS_MAST_LOST_ARB		0x38
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK		0x40
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK		0x48
+#define	MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK		0x50
+#define	MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK		0x58
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK		0xd0
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK	0xd8
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK		0xe0
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
+#define	MV64XXX_I2C_STATUS_NO_STATUS			0xf8
+
+/* Register defines (I2C bridge) */
+#define	MV64XXX_I2C_REG_TX_DATA_LO			0xc0
+#define	MV64XXX_I2C_REG_TX_DATA_HI			0xc4
+#define	MV64XXX_I2C_REG_RX_DATA_LO			0xc8
+#define	MV64XXX_I2C_REG_RX_DATA_HI			0xcc
+#define	MV64XXX_I2C_REG_BRIDGE_CONTROL			0xd0
+#define	MV64XXX_I2C_REG_BRIDGE_STATUS			0xd4
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE		0xd8
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_MASK		0xdC
+#define	MV64XXX_I2C_REG_BRIDGE_TIMING			0xe0
+
+/* Bridge Control values */
+#define	MV64XXX_I2C_BRIDGE_CONTROL_WR			BIT(0)
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RD			BIT(1)
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT		2
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT		BIT(12)
+#define	MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT	13
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT	16
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ENABLE		BIT(19)
+#define	MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START	BIT(20)
+
+/* Bridge Status values */
+#define	MV64XXX_I2C_BRIDGE_STATUS_ERROR			BIT(0)
+
+/* Driver states */
+enum {
+	MV64XXX_I2C_STATE_INVALID,
+	MV64XXX_I2C_STATE_IDLE,
+	MV64XXX_I2C_STATE_WAITING_FOR_START_COND,
+	MV64XXX_I2C_STATE_WAITING_FOR_RESTART,
+	MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
+};
+
+/* Driver actions */
+enum {
+	MV64XXX_I2C_ACTION_INVALID,
+	MV64XXX_I2C_ACTION_CONTINUE,
+	MV64XXX_I2C_ACTION_SEND_RESTART,
+	MV64XXX_I2C_ACTION_SEND_ADDR_1,
+	MV64XXX_I2C_ACTION_SEND_ADDR_2,
+	MV64XXX_I2C_ACTION_SEND_DATA,
+	MV64XXX_I2C_ACTION_RCV_DATA,
+	MV64XXX_I2C_ACTION_RCV_DATA_STOP,
+	MV64XXX_I2C_ACTION_SEND_STOP,
+};
+
+struct mv64xxx_i2c_regs {
+	u8	addr;
+	u8	ext_addr;
+	u8	data;
+	u8	control;
+	u8	status;
+	u8	clock;
+	u8	soft_reset;
+};
+
+struct mv64xxx_i2c_data {
+	struct i2c_msg		*msgs;
+	int			num_msgs;
+	int			irq;
+	u32			state;
+	u32			action;
+	u32			aborting;
+	u32			cntl_bits;
+	void __iomem		*reg_base;
+	struct mv64xxx_i2c_regs	reg_offsets;
+	u32			addr1;
+	u32			addr2;
+	u32			bytes_left;
+	u32			byte_posn;
+	u32			send_stop;
+	u32			block;
+	int			rc;
+	u32			freq_m;
+	u32			freq_n;
+	struct clk              *clk;
+	wait_queue_head_t	waitq;
+	spinlock_t		lock;
+	struct i2c_msg		*msg;
+	struct i2c_adapter	adapter;
+	bool			offload_enabled;
+/* 5us delay in order to avoid repeated start timing violation */
+	bool			errata_delay;
+	struct reset_control	*rstc;
+	bool			irq_clear_inverted;
+	/* Clk div is 2 to the power n, not 2 to the power n + 1 */
+	bool			clk_n_base_0;
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
+	.addr		= 0x00,
+	.ext_addr	= 0x10,
+	.data		= 0x04,
+	.control	= 0x08,
+	.status		= 0x0c,
+	.clock		= 0x0c,
+	.soft_reset	= 0x1c,
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
+	.addr		= 0x00,
+	.ext_addr	= 0x04,
+	.data		= 0x08,
+	.control	= 0x0c,
+	.status		= 0x10,
+	.clock		= 0x14,
+	.soft_reset	= 0x18,
+};
+
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+	struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
+		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
+		drv_data->addr2 = 0;
+	}
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Finite State Machine & Interrupt Routines
+ *
+ *****************************************************************************
+ */
+
+/* Reset hardware and initialize FSM */
+static void
+mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
+{
+	if (drv_data->offload_enabled) {
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
+	}
+
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
+	writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
+		drv_data->reg_base + drv_data->reg_offsets.clock);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
+	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
+		drv_data->reg_base + drv_data->reg_offsets.control);
+	drv_data->state = MV64XXX_I2C_STATE_IDLE;
+}
+
+static void
+mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
+{
+	/*
+	 * If state is idle, then this is likely the remnants of an old
+	 * operation that driver has given up on or the user has killed.
+	 * If so, issue the stop condition and go to idle.
+	 */
+	if (drv_data->state == MV64XXX_I2C_STATE_IDLE) {
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		return;
+	}
+
+	/* The status from the ctlr [mostly] tells us what to do next */
+	switch (status) {
+	/* Start condition interrupt */
+	case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */
+	case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
+		break;
+
+	/* Performing a write */
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
+	case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
+		if ((drv_data->bytes_left == 0)
+				|| (drv_data->aborting
+					&& (drv_data->byte_posn != 0))) {
+			if (drv_data->send_stop || drv_data->aborting) {
+				drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+				drv_data->state = MV64XXX_I2C_STATE_IDLE;
+			} else {
+				drv_data->action =
+					MV64XXX_I2C_ACTION_SEND_RESTART;
+				drv_data->state =
+					MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
+			}
+		} else {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		}
+		break;
+
+	/* Performing a read */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
+		if (drv_data->bytes_left == 0) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
+		if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
+			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
+		else {
+			drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA;
+			drv_data->bytes_left--;
+		}
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
+
+		if ((drv_data->bytes_left == 1) || drv_data->aborting)
+			drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
+		break;
+
+	case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
+		drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		break;
+
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
+	case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
+		/* Doesn't seem to be a device at other end */
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		drv_data->rc = -ENXIO;
+		break;
+
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
+			"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
+			 drv_data->state, status, drv_data->msg->addr,
+			 drv_data->msg->flags);
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		mv64xxx_i2c_hw_init(drv_data);
+		drv_data->rc = -EIO;
+	}
+}
+
+static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
+{
+	drv_data->msg = drv_data->msgs;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = drv_data->msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+
+	mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+	writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+	       drv_data->reg_base + drv_data->reg_offsets.control);
+}
+
+static void
+mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
+{
+	switch(drv_data->action) {
+	case MV64XXX_I2C_ACTION_SEND_RESTART:
+		/* We should only get here if we have further messages */
+		BUG_ON(drv_data->num_msgs == 0);
+
+		drv_data->msgs++;
+		drv_data->num_msgs--;
+		mv64xxx_i2c_send_start(drv_data);
+
+		if (drv_data->errata_delay)
+			udelay(5);
+
+		/*
+		 * We're never at the start of the message here, and by this
+		 * time it's already too late to do any protocol mangling.
+		 * Thankfully, do not advertise support for that feature.
+		 */
+		drv_data->send_stop = drv_data->num_msgs == 1;
+		break;
+
+	case MV64XXX_I2C_ACTION_CONTINUE:
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_ADDR_1:
+		writel(drv_data->addr1,
+			drv_data->reg_base + drv_data->reg_offsets.data);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_ADDR_2:
+		writel(drv_data->addr2,
+			drv_data->reg_base + drv_data->reg_offsets.data);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_DATA:
+		writel(drv_data->msg->buf[drv_data->byte_posn++],
+			drv_data->reg_base + drv_data->reg_offsets.data);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		break;
+
+	case MV64XXX_I2C_ACTION_RCV_DATA:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		break;
+
+	case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
+		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		drv_data->block = 0;
+		if (drv_data->errata_delay)
+			udelay(5);
+
+		wake_up(&drv_data->waitq);
+		break;
+
+	case MV64XXX_I2C_ACTION_INVALID:
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_do_action: Invalid action: %d\n",
+			drv_data->action);
+		drv_data->rc = -EIO;
+
+		/* FALLTHRU */
+	case MV64XXX_I2C_ACTION_SEND_STOP:
+		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		drv_data->block = 0;
+		wake_up(&drv_data->waitq);
+		break;
+	}
+}
+
+static void
+mv64xxx_i2c_read_offload_rx_data(struct mv64xxx_i2c_data *drv_data,
+				 struct i2c_msg *msg)
+{
+	u32 buf[2];
+
+	buf[0] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_LO);
+	buf[1] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_HI);
+
+	memcpy(msg->buf, buf, msg->len);
+}
+
+static int
+mv64xxx_i2c_intr_offload(struct mv64xxx_i2c_data *drv_data)
+{
+	u32 cause, status;
+
+	cause = readl(drv_data->reg_base +
+		      MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+	if (!cause)
+		return IRQ_NONE;
+
+	status = readl(drv_data->reg_base +
+		       MV64XXX_I2C_REG_BRIDGE_STATUS);
+
+	if (status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) {
+		drv_data->rc = -EIO;
+		goto out;
+	}
+
+	drv_data->rc = 0;
+
+	/*
+	 * Transaction is a one message read transaction, read data
+	 * for this message.
+	 */
+	if (drv_data->num_msgs == 1 && drv_data->msgs[0].flags & I2C_M_RD) {
+		mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs);
+		drv_data->msgs++;
+		drv_data->num_msgs--;
+	}
+	/*
+	 * Transaction is a two messages write/read transaction, read
+	 * data for the second (read) message.
+	 */
+	else if (drv_data->num_msgs == 2 &&
+		 !(drv_data->msgs[0].flags & I2C_M_RD) &&
+		 drv_data->msgs[1].flags & I2C_M_RD) {
+		mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs + 1);
+		drv_data->msgs += 2;
+		drv_data->num_msgs -= 2;
+	}
+
+out:
+	writel(0, drv_data->reg_base +	MV64XXX_I2C_REG_BRIDGE_CONTROL);
+	writel(0, drv_data->reg_base +
+	       MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+	drv_data->block = 0;
+
+	wake_up(&drv_data->waitq);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+mv64xxx_i2c_intr(int irq, void *dev_id)
+{
+	struct mv64xxx_i2c_data	*drv_data = dev_id;
+	unsigned long	flags;
+	u32		status;
+	irqreturn_t	rc = IRQ_NONE;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->offload_enabled)
+		rc = mv64xxx_i2c_intr_offload(drv_data);
+
+	while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
+						MV64XXX_I2C_REG_CONTROL_IFLG) {
+		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
+		mv64xxx_i2c_fsm(drv_data, status);
+		mv64xxx_i2c_do_action(drv_data);
+
+		if (drv_data->irq_clear_inverted)
+			writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
+			       drv_data->reg_base + drv_data->reg_offsets.control);
+
+		rc = IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return rc;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Msg Execution Routines
+ *
+ *****************************************************************************
+ */
+static void
+mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
+{
+	long		time_left;
+	unsigned long	flags;
+	char		abort = 0;
+
+	time_left = wait_event_timeout(drv_data->waitq,
+		!drv_data->block, drv_data->adapter.timeout);
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (!time_left) { /* Timed out */
+		drv_data->rc = -ETIMEDOUT;
+		abort = 1;
+	} else if (time_left < 0) { /* Interrupted/Error */
+		drv_data->rc = time_left; /* errno value */
+		abort = 1;
+	}
+
+	if (abort && drv_data->block) {
+		drv_data->aborting = 1;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+
+		time_left = wait_event_timeout(drv_data->waitq,
+			!drv_data->block, drv_data->adapter.timeout);
+
+		if ((time_left <= 0) && drv_data->block) {
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+			dev_err(&drv_data->adapter.dev,
+				"mv64xxx: I2C bus locked, block: %d, "
+				"time_left: %d\n", drv_data->block,
+				(int)time_left);
+			mv64xxx_i2c_hw_init(drv_data);
+		}
+	} else
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+static int
+mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
+				int is_last)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+
+	drv_data->send_stop = is_last;
+	drv_data->block = 1;
+	mv64xxx_i2c_send_start(drv_data);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	mv64xxx_i2c_wait_for_completion(drv_data);
+	return drv_data->rc;
+}
+
+static void
+mv64xxx_i2c_prepare_tx(struct mv64xxx_i2c_data *drv_data)
+{
+	struct i2c_msg *msg = drv_data->msgs;
+	u32 buf[2];
+
+	memcpy(buf, msg->buf, msg->len);
+
+	writel(buf[0], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
+	writel(buf[1], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
+}
+
+static int
+mv64xxx_i2c_offload_xfer(struct mv64xxx_i2c_data *drv_data)
+{
+	struct i2c_msg *msgs = drv_data->msgs;
+	int num = drv_data->num_msgs;
+	unsigned long ctrl_reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* Build transaction */
+	ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
+		(msgs[0].addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
+
+	if (msgs[0].flags & I2C_M_TEN)
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
+
+	/* Single write message transaction */
+	if (num == 1 && !(msgs[0].flags & I2C_M_RD)) {
+		size_t len = msgs[0].len - 1;
+
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
+			(len << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT);
+		mv64xxx_i2c_prepare_tx(drv_data);
+	}
+	/* Single read message transaction */
+	else if (num == 1 && msgs[0].flags & I2C_M_RD) {
+		size_t len = msgs[0].len - 1;
+
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
+			(len << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT);
+	}
+	/*
+	 * Transaction with one write and one read message. This is
+	 * guaranteed by the mv64xx_i2c_can_offload() checks.
+	 */
+	else if (num == 2) {
+		size_t lentx = msgs[0].len - 1;
+		size_t lenrx = msgs[1].len - 1;
+
+		ctrl_reg |=
+			MV64XXX_I2C_BRIDGE_CONTROL_RD |
+			MV64XXX_I2C_BRIDGE_CONTROL_WR |
+			(lentx << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT) |
+			(lenrx << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT) |
+			MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START;
+		mv64xxx_i2c_prepare_tx(drv_data);
+	}
+
+	/* Execute transaction */
+	drv_data->block = 1;
+	writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	mv64xxx_i2c_wait_for_completion(drv_data);
+
+	return drv_data->rc;
+}
+
+static bool
+mv64xxx_i2c_valid_offload_sz(struct i2c_msg *msg)
+{
+	return msg->len <= 8 && msg->len >= 1;
+}
+
+static bool
+mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data)
+{
+	struct i2c_msg *msgs = drv_data->msgs;
+	int num = drv_data->num_msgs;
+
+	if (!drv_data->offload_enabled)
+		return false;
+
+	/*
+	 * We can offload a transaction consisting of a single
+	 * message, as long as the message has a length between 1 and
+	 * 8 bytes.
+	 */
+	if (num == 1 && mv64xxx_i2c_valid_offload_sz(msgs))
+		return true;
+
+	/*
+	 * We can offload a transaction consisting of two messages, if
+	 * the first is a write and a second is a read, and both have
+	 * a length between 1 and 8 bytes.
+	 */
+	if (num == 2 &&
+	    mv64xxx_i2c_valid_offload_sz(msgs) &&
+	    mv64xxx_i2c_valid_offload_sz(msgs + 1) &&
+	    !(msgs[0].flags & I2C_M_RD) &&
+	    msgs[1].flags & I2C_M_RD)
+		return true;
+
+	return false;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Core Support Routines (Interface to higher level I2C code)
+ *
+ *****************************************************************************
+ */
+static u32
+mv64xxx_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int
+mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
+	int rc, ret = num;
+
+	BUG_ON(drv_data->msgs != NULL);
+	drv_data->msgs = msgs;
+	drv_data->num_msgs = num;
+
+	if (mv64xxx_i2c_can_offload(drv_data))
+		rc = mv64xxx_i2c_offload_xfer(drv_data);
+	else
+		rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
+
+	if (rc < 0)
+		ret = rc;
+
+	drv_data->num_msgs = 0;
+	drv_data->msgs = NULL;
+
+	return ret;
+}
+
+static const struct i2c_algorithm mv64xxx_i2c_algo = {
+	.master_xfer = mv64xxx_i2c_xfer,
+	.functionality = mv64xxx_i2c_functionality,
+};
+
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface & Early Init Routines
+ *
+ *****************************************************************************
+ */
+static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
+	{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
+
+#ifdef CONFIG_OF
+static int
+mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data,
+		  const int tclk, const int n, const int m)
+{
+	if (drv_data->clk_n_base_0)
+		return tclk / (10 * (m + 1) * (1 << n));
+	else
+		return tclk / (10 * (m + 1) * (2 << n));
+}
+
+static bool
+mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data,
+			  const u32 req_freq, const u32 tclk)
+{
+	int freq, delta, best_delta = INT_MAX;
+	int m, n;
+
+	for (n = 0; n <= 7; n++)
+		for (m = 0; m <= 15; m++) {
+			freq = mv64xxx_calc_freq(drv_data, tclk, n, m);
+			delta = req_freq - freq;
+			if (delta >= 0 && delta < best_delta) {
+				drv_data->freq_m = m;
+				drv_data->freq_n = n;
+				best_delta = delta;
+			}
+			if (best_delta == 0)
+				return true;
+		}
+	if (best_delta == INT_MAX)
+		return false;
+	return true;
+}
+
+static int
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+		  struct device *dev)
+{
+	const struct of_device_id *device;
+	struct device_node *np = dev->of_node;
+	u32 bus_freq, tclk;
+	int rc = 0;
+
+	/* CLK is mandatory when using DT to describe the i2c bus. We
+	 * need to know tclk in order to calculate bus clock
+	 * factors.
+	 */
+	if (IS_ERR(drv_data->clk)) {
+		rc = -ENODEV;
+		goto out;
+	}
+	tclk = clk_get_rate(drv_data->clk);
+
+	if (of_property_read_u32(np, "clock-frequency", &bus_freq))
+		bus_freq = 100000; /* 100kHz by default */
+
+	if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
+	    of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+		drv_data->clk_n_base_0 = true;
+
+	if (!mv64xxx_find_baud_factors(drv_data, bus_freq, tclk)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	drv_data->rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+	if (IS_ERR(drv_data->rstc)) {
+		rc = PTR_ERR(drv_data->rstc);
+		goto out;
+	}
+	reset_control_deassert(drv_data->rstc);
+
+	/* Its not yet defined how timeouts will be specified in device tree.
+	 * So hard code the value to 1 second.
+	 */
+	drv_data->adapter.timeout = HZ;
+
+	device = of_match_device(mv64xxx_i2c_of_match_table, dev);
+	if (!device)
+		return -ENODEV;
+
+	memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+
+	/*
+	 * For controllers embedded in new SoCs activate the
+	 * Transaction Generator support and the errata fix.
+	 */
+	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
+		drv_data->offload_enabled = true;
+		/* The delay is only needed in standard mode (100kHz) */
+		if (bus_freq <= 100000)
+			drv_data->errata_delay = true;
+	}
+
+	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
+		drv_data->offload_enabled = false;
+		/* The delay is only needed in standard mode (100kHz) */
+		if (bus_freq <= 100000)
+			drv_data->errata_delay = true;
+	}
+
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+		drv_data->irq_clear_inverted = true;
+
+out:
+	return rc;
+}
+#else /* CONFIG_OF */
+static int
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+		  struct device *dev)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
+static int
+mv64xxx_i2c_probe(struct platform_device *pd)
+{
+	struct mv64xxx_i2c_data		*drv_data;
+	struct mv64xxx_i2c_pdata	*pdata = dev_get_platdata(&pd->dev);
+	struct resource	*r;
+	int	rc;
+
+	if ((!pdata && !pd->dev.of_node))
+		return -ENODEV;
+
+	drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
+				GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	r = platform_get_resource(pd, IORESOURCE_MEM, 0);
+	drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+	if (IS_ERR(drv_data->reg_base))
+		return PTR_ERR(drv_data->reg_base);
+
+	strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
+		sizeof(drv_data->adapter.name));
+
+	init_waitqueue_head(&drv_data->waitq);
+	spin_lock_init(&drv_data->lock);
+
+	/* Not all platforms have a clk */
+	drv_data->clk = devm_clk_get(&pd->dev, NULL);
+	if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!IS_ERR(drv_data->clk))
+		clk_prepare_enable(drv_data->clk);
+
+	drv_data->irq = platform_get_irq(pd, 0);
+
+	if (pdata) {
+		drv_data->freq_m = pdata->freq_m;
+		drv_data->freq_n = pdata->freq_n;
+		drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+		drv_data->offload_enabled = false;
+		memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
+	} else if (pd->dev.of_node) {
+		rc = mv64xxx_of_config(drv_data, &pd->dev);
+		if (rc)
+			goto exit_clk;
+	}
+	if (drv_data->irq < 0) {
+		rc = drv_data->irq;
+		goto exit_reset;
+	}
+
+	drv_data->adapter.dev.parent = &pd->dev;
+	drv_data->adapter.algo = &mv64xxx_i2c_algo;
+	drv_data->adapter.owner = THIS_MODULE;
+	drv_data->adapter.class = I2C_CLASS_DEPRECATED;
+	drv_data->adapter.nr = pd->id;
+	drv_data->adapter.dev.of_node = pd->dev.of_node;
+	platform_set_drvdata(pd, drv_data);
+	i2c_set_adapdata(&drv_data->adapter, drv_data);
+
+	mv64xxx_i2c_hw_init(drv_data);
+
+	rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
+			 MV64XXX_I2C_CTLR_NAME, drv_data);
+	if (rc) {
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't register intr handler irq%d: %d\n",
+			drv_data->irq, rc);
+		goto exit_reset;
+	} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
+		goto exit_free_irq;
+	}
+
+	return 0;
+
+exit_free_irq:
+	free_irq(drv_data->irq, drv_data);
+exit_reset:
+	reset_control_assert(drv_data->rstc);
+exit_clk:
+	/* Not all platforms have a clk */
+	if (!IS_ERR(drv_data->clk))
+		clk_disable_unprepare(drv_data->clk);
+
+	return rc;
+}
+
+static int
+mv64xxx_i2c_remove(struct platform_device *dev)
+{
+	struct mv64xxx_i2c_data		*drv_data = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&drv_data->adapter);
+	free_irq(drv_data->irq, drv_data);
+	reset_control_assert(drv_data->rstc);
+	/* Not all platforms have a clk */
+	if (!IS_ERR(drv_data->clk))
+		clk_disable_unprepare(drv_data->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mv64xxx_i2c_resume(struct device *dev)
+{
+	struct mv64xxx_i2c_data *drv_data = dev_get_drvdata(dev);
+
+	mv64xxx_i2c_hw_init(drv_data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mv64xxx_i2c_pm = {
+	.resume = mv64xxx_i2c_resume,
+};
+
+#define mv64xxx_i2c_pm_ops (&mv64xxx_i2c_pm)
+#else
+#define mv64xxx_i2c_pm_ops NULL
+#endif
+
+static struct platform_driver mv64xxx_i2c_driver = {
+	.probe	= mv64xxx_i2c_probe,
+	.remove	= mv64xxx_i2c_remove,
+	.driver	= {
+		.name	= MV64XXX_I2C_CTLR_NAME,
+		.pm     = mv64xxx_i2c_pm_ops,
+		.of_match_table = mv64xxx_i2c_of_match_table,
+	},
+};
+
+module_platform_driver(mv64xxx_i2c_driver);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
+MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mxs.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mxs.c
new file mode 100644
index 0000000..d4e8f19
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-mxs.c
@@ -0,0 +1,918 @@
+/*
+ * Freescale MXS I2C bus driver
+ *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
+ *
+ * based on a (non-working) driver which was:
+ *
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/stmp_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+#define DRIVER_NAME "mxs-i2c"
+
+#define MXS_I2C_CTRL0		(0x00)
+#define MXS_I2C_CTRL0_SET	(0x04)
+#define MXS_I2C_CTRL0_CLR	(0x08)
+
+#define MXS_I2C_CTRL0_SFTRST			0x80000000
+#define MXS_I2C_CTRL0_RUN			0x20000000
+#define MXS_I2C_CTRL0_SEND_NAK_ON_LAST		0x02000000
+#define MXS_I2C_CTRL0_PIO_MODE			0x01000000
+#define MXS_I2C_CTRL0_RETAIN_CLOCK		0x00200000
+#define MXS_I2C_CTRL0_POST_SEND_STOP		0x00100000
+#define MXS_I2C_CTRL0_PRE_SEND_START		0x00080000
+#define MXS_I2C_CTRL0_MASTER_MODE		0x00020000
+#define MXS_I2C_CTRL0_DIRECTION			0x00010000
+#define MXS_I2C_CTRL0_XFER_COUNT(v)		((v) & 0x0000FFFF)
+
+#define MXS_I2C_TIMING0		(0x10)
+#define MXS_I2C_TIMING1		(0x20)
+#define MXS_I2C_TIMING2		(0x30)
+
+#define MXS_I2C_CTRL1		(0x40)
+#define MXS_I2C_CTRL1_SET	(0x44)
+#define MXS_I2C_CTRL1_CLR	(0x48)
+
+#define MXS_I2C_CTRL1_CLR_GOT_A_NAK		0x10000000
+#define MXS_I2C_CTRL1_BUS_FREE_IRQ		0x80
+#define MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x40
+#define MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ		0x20
+#define MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x10
+#define MXS_I2C_CTRL1_EARLY_TERM_IRQ		0x08
+#define MXS_I2C_CTRL1_MASTER_LOSS_IRQ		0x04
+#define MXS_I2C_CTRL1_SLAVE_STOP_IRQ		0x02
+#define MXS_I2C_CTRL1_SLAVE_IRQ			0x01
+
+#define MXS_I2C_STAT		(0x50)
+#define MXS_I2C_STAT_GOT_A_NAK			0x10000000
+#define MXS_I2C_STAT_BUS_BUSY			0x00000800
+#define MXS_I2C_STAT_CLK_GEN_BUSY		0x00000400
+
+#define MXS_I2C_DATA(i2c)	((i2c->dev_type == MXS_I2C_V1) ? 0x60 : 0xa0)
+
+#define MXS_I2C_DEBUG0_CLR(i2c)	((i2c->dev_type == MXS_I2C_V1) ? 0x78 : 0xb8)
+
+#define MXS_I2C_DEBUG0_DMAREQ	0x80000000
+
+#define MXS_I2C_IRQ_MASK	(MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | \
+				 MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ | \
+				 MXS_I2C_CTRL1_EARLY_TERM_IRQ | \
+				 MXS_I2C_CTRL1_MASTER_LOSS_IRQ | \
+				 MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
+				 MXS_I2C_CTRL1_SLAVE_IRQ)
+
+
+#define MXS_CMD_I2C_SELECT	(MXS_I2C_CTRL0_RETAIN_CLOCK |	\
+				 MXS_I2C_CTRL0_PRE_SEND_START |	\
+				 MXS_I2C_CTRL0_MASTER_MODE |	\
+				 MXS_I2C_CTRL0_DIRECTION |	\
+				 MXS_I2C_CTRL0_XFER_COUNT(1))
+
+#define MXS_CMD_I2C_WRITE	(MXS_I2C_CTRL0_PRE_SEND_START |	\
+				 MXS_I2C_CTRL0_MASTER_MODE |	\
+				 MXS_I2C_CTRL0_DIRECTION)
+
+#define MXS_CMD_I2C_READ	(MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
+				 MXS_I2C_CTRL0_MASTER_MODE)
+
+enum mxs_i2c_devtype {
+	MXS_I2C_UNKNOWN = 0,
+	MXS_I2C_V1,
+	MXS_I2C_V2,
+};
+
+/**
+ * struct mxs_i2c_dev - per device, private MXS-I2C data
+ *
+ * @dev: driver model device node
+ * @dev_type: distinguish i.MX23/i.MX28 features
+ * @regs: IO registers pointer
+ * @cmd_complete: completion object for transaction wait
+ * @cmd_err: error code for last transaction
+ * @adapter: i2c subsystem adapter node
+ */
+struct mxs_i2c_dev {
+	struct device *dev;
+	enum mxs_i2c_devtype dev_type;
+	void __iomem *regs;
+	struct completion cmd_complete;
+	int cmd_err;
+	struct i2c_adapter adapter;
+
+	uint32_t timing0;
+	uint32_t timing1;
+	uint32_t timing2;
+
+	/* DMA support components */
+	struct dma_chan			*dmach;
+	uint32_t			pio_data[2];
+	uint32_t			addr_data;
+	struct scatterlist		sg_io[2];
+	bool				dma_read;
+};
+
+static int mxs_i2c_reset(struct mxs_i2c_dev *i2c)
+{
+	int ret = stmp_reset_block(i2c->regs);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure timing for the I2C block. The I2C TIMING2 register has to
+	 * be programmed with this particular magic number. The rest is derived
+	 * from the XTAL speed and requested I2C speed.
+	 *
+	 * For details, see i.MX233 [25.4.2 - 25.4.4] and i.MX28 [27.5.2 - 27.5.4].
+	 */
+	writel(i2c->timing0, i2c->regs + MXS_I2C_TIMING0);
+	writel(i2c->timing1, i2c->regs + MXS_I2C_TIMING1);
+	writel(i2c->timing2, i2c->regs + MXS_I2C_TIMING2);
+
+	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+	return 0;
+}
+
+static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
+{
+	if (i2c->dma_read) {
+		dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+		dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+	} else {
+		dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+	}
+}
+
+static void mxs_i2c_dma_irq_callback(void *param)
+{
+	struct mxs_i2c_dev *i2c = param;
+
+	complete(&i2c->cmd_complete);
+	mxs_i2c_dma_finish(i2c);
+}
+
+static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msg, uint32_t flags)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
+
+	if (msg->flags & I2C_M_RD) {
+		i2c->dma_read = 1;
+		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
+
+		/*
+		 * SELECT command.
+		 */
+
+		/* Queue the PIO register write transfer. */
+		i2c->pio_data[0] = MXS_CMD_I2C_SELECT;
+		desc = dmaengine_prep_slave_sg(i2c->dmach,
+					(struct scatterlist *)&i2c->pio_data[0],
+					1, DMA_TRANS_NONE, 0);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get PIO reg. write descriptor.\n");
+			goto select_init_pio_fail;
+		}
+
+		/* Queue the DMA data transfer. */
+		sg_init_one(&i2c->sg_io[0], &i2c->addr_data, 1);
+		dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
+					DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get DMA data write descriptor.\n");
+			goto select_init_dma_fail;
+		}
+
+		/*
+		 * READ command.
+		 */
+
+		/* Queue the PIO register write transfer. */
+		i2c->pio_data[1] = flags | MXS_CMD_I2C_READ |
+				MXS_I2C_CTRL0_XFER_COUNT(msg->len);
+		desc = dmaengine_prep_slave_sg(i2c->dmach,
+					(struct scatterlist *)&i2c->pio_data[1],
+					1, DMA_TRANS_NONE, DMA_PREP_INTERRUPT);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get PIO reg. write descriptor.\n");
+			goto select_init_dma_fail;
+		}
+
+		/* Queue the DMA data transfer. */
+		sg_init_one(&i2c->sg_io[1], msg->buf, msg->len);
+		dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
+					DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get DMA data write descriptor.\n");
+			goto read_init_dma_fail;
+		}
+	} else {
+		i2c->dma_read = 0;
+		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
+
+		/*
+		 * WRITE command.
+		 */
+
+		/* Queue the PIO register write transfer. */
+		i2c->pio_data[0] = flags | MXS_CMD_I2C_WRITE |
+				MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1);
+		desc = dmaengine_prep_slave_sg(i2c->dmach,
+					(struct scatterlist *)&i2c->pio_data[0],
+					1, DMA_TRANS_NONE, 0);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get PIO reg. write descriptor.\n");
+			goto write_init_pio_fail;
+		}
+
+		/* Queue the DMA data transfer. */
+		sg_init_table(i2c->sg_io, 2);
+		sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1);
+		sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len);
+		dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+		desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
+					DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (!desc) {
+			dev_err(i2c->dev,
+				"Failed to get DMA data write descriptor.\n");
+			goto write_init_dma_fail;
+		}
+	}
+
+	/*
+	 * The last descriptor must have this callback,
+	 * to finish the DMA transaction.
+	 */
+	desc->callback = mxs_i2c_dma_irq_callback;
+	desc->callback_param = i2c;
+
+	/* Start the transfer. */
+	dmaengine_submit(desc);
+	dma_async_issue_pending(i2c->dmach);
+	return 0;
+
+/* Read failpath. */
+read_init_dma_fail:
+	dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+select_init_dma_fail:
+	dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+select_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
+	return -EINVAL;
+
+/* Write failpath. */
+write_init_dma_fail:
+	dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+write_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
+	return -EINVAL;
+}
+
+static int mxs_i2c_pio_wait_xfer_end(struct mxs_i2c_dev *i2c)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+	while (readl(i2c->regs + MXS_I2C_CTRL0) & MXS_I2C_CTRL0_RUN) {
+		if (readl(i2c->regs + MXS_I2C_CTRL1) &
+				MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
+			return -ENXIO;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		cond_resched();
+	}
+
+	return 0;
+}
+
+static int mxs_i2c_pio_check_error_state(struct mxs_i2c_dev *i2c)
+{
+	u32 state;
+
+	state = readl(i2c->regs + MXS_I2C_CTRL1_CLR) & MXS_I2C_IRQ_MASK;
+
+	if (state & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
+		i2c->cmd_err = -ENXIO;
+	else if (state & (MXS_I2C_CTRL1_EARLY_TERM_IRQ |
+			  MXS_I2C_CTRL1_MASTER_LOSS_IRQ |
+			  MXS_I2C_CTRL1_SLAVE_STOP_IRQ |
+			  MXS_I2C_CTRL1_SLAVE_IRQ))
+		i2c->cmd_err = -EIO;
+
+	return i2c->cmd_err;
+}
+
+static void mxs_i2c_pio_trigger_cmd(struct mxs_i2c_dev *i2c, u32 cmd)
+{
+	u32 reg;
+
+	writel(cmd, i2c->regs + MXS_I2C_CTRL0);
+
+	/* readback makes sure the write is latched into hardware */
+	reg = readl(i2c->regs + MXS_I2C_CTRL0);
+	reg |= MXS_I2C_CTRL0_RUN;
+	writel(reg, i2c->regs + MXS_I2C_CTRL0);
+}
+
+/*
+ * Start WRITE transaction on the I2C bus. By studying i.MX23 datasheet,
+ * CTRL0::PIO_MODE bit description clarifies the order in which the registers
+ * must be written during PIO mode operation. First, the CTRL0 register has
+ * to be programmed with all the necessary bits but the RUN bit. Then the
+ * payload has to be written into the DATA register. Finally, the transmission
+ * is executed by setting the RUN bit in CTRL0.
+ */
+static void mxs_i2c_pio_trigger_write_cmd(struct mxs_i2c_dev *i2c, u32 cmd,
+					  u32 data)
+{
+	writel(cmd, i2c->regs + MXS_I2C_CTRL0);
+
+	if (i2c->dev_type == MXS_I2C_V1)
+		writel(MXS_I2C_CTRL0_PIO_MODE, i2c->regs + MXS_I2C_CTRL0_SET);
+
+	writel(data, i2c->regs + MXS_I2C_DATA(i2c));
+	writel(MXS_I2C_CTRL0_RUN, i2c->regs + MXS_I2C_CTRL0_SET);
+}
+
+static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msg, uint32_t flags)
+{
+	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
+	uint32_t addr_data = msg->addr << 1;
+	uint32_t data = 0;
+	int i, ret, xlen = 0, xmit = 0;
+	uint32_t start;
+
+	/* Mute IRQs coming from this block. */
+	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_CLR);
+
+	/*
+	 * MX23 idea:
+	 * - Enable CTRL0::PIO_MODE (1 << 24)
+	 * - Enable CTRL1::ACK_MODE (1 << 27)
+	 *
+	 * WARNING! The MX23 is broken in some way, even if it claims
+	 * to support PIO, when we try to transfer any amount of data
+	 * that is not aligned to 4 bytes, the DMA engine will have
+	 * bits in DEBUG1::DMA_BYTES_ENABLES still set even after the
+	 * transfer. This in turn will mess up the next transfer as
+	 * the block it emit one byte write onto the bus terminated
+	 * with a NAK+STOP. A possible workaround is to reset the IP
+	 * block after every PIO transmission, which might just work.
+	 *
+	 * NOTE: The CTRL0::PIO_MODE description is important, since
+	 * it outlines how the PIO mode is really supposed to work.
+	 */
+	if (msg->flags & I2C_M_RD) {
+		/*
+		 * PIO READ transfer:
+		 *
+		 * This transfer MUST be limited to 4 bytes maximum. It is not
+		 * possible to transfer more than four bytes via PIO, since we
+		 * can not in any way make sure we can read the data from the
+		 * DATA register fast enough. Besides, the RX FIFO is only four
+		 * bytes deep, thus we can only really read up to four bytes at
+		 * time. Finally, there is no bit indicating us that new data
+		 * arrived at the FIFO and can thus be fetched from the DATA
+		 * register.
+		 */
+		BUG_ON(msg->len > 4);
+
+		addr_data |= I2C_SMBUS_READ;
+
+		/* SELECT command. */
+		mxs_i2c_pio_trigger_write_cmd(i2c, MXS_CMD_I2C_SELECT,
+					      addr_data);
+
+		ret = mxs_i2c_pio_wait_xfer_end(i2c);
+		if (ret) {
+			dev_dbg(i2c->dev,
+				"PIO: Failed to send SELECT command!\n");
+			goto cleanup;
+		}
+
+		/* READ command. */
+		mxs_i2c_pio_trigger_cmd(i2c,
+					MXS_CMD_I2C_READ | flags |
+					MXS_I2C_CTRL0_XFER_COUNT(msg->len));
+
+		ret = mxs_i2c_pio_wait_xfer_end(i2c);
+		if (ret) {
+			dev_dbg(i2c->dev,
+				"PIO: Failed to send READ command!\n");
+			goto cleanup;
+		}
+
+		data = readl(i2c->regs + MXS_I2C_DATA(i2c));
+		for (i = 0; i < msg->len; i++) {
+			msg->buf[i] = data & 0xff;
+			data >>= 8;
+		}
+	} else {
+		/*
+		 * PIO WRITE transfer:
+		 *
+		 * The code below implements clock stretching to circumvent
+		 * the possibility of kernel not being able to supply data
+		 * fast enough. It is possible to transfer arbitrary amount
+		 * of data using PIO write.
+		 */
+		addr_data |= I2C_SMBUS_WRITE;
+
+		/*
+		 * The LSB of data buffer is the first byte blasted across
+		 * the bus. Higher order bytes follow. Thus the following
+		 * filling schematic.
+		 */
+
+		data = addr_data << 24;
+
+		/* Start the transfer with START condition. */
+		start = MXS_I2C_CTRL0_PRE_SEND_START;
+
+		/* If the transfer is long, use clock stretching. */
+		if (msg->len > 3)
+			start |= MXS_I2C_CTRL0_RETAIN_CLOCK;
+
+		for (i = 0; i < msg->len; i++) {
+			data >>= 8;
+			data |= (msg->buf[i] << 24);
+
+			xmit = 0;
+
+			/* This is the last transfer of the message. */
+			if (i + 1 == msg->len) {
+				/* Add optional STOP flag. */
+				start |= flags;
+				/* Remove RETAIN_CLOCK bit. */
+				start &= ~MXS_I2C_CTRL0_RETAIN_CLOCK;
+				xmit = 1;
+			}
+
+			/* Four bytes are ready in the "data" variable. */
+			if ((i & 3) == 2)
+				xmit = 1;
+
+			/* Nothing interesting happened, continue stuffing. */
+			if (!xmit)
+				continue;
+
+			/*
+			 * Compute the size of the transfer and shift the
+			 * data accordingly.
+			 *
+			 * i = (4k + 0) .... xlen = 2
+			 * i = (4k + 1) .... xlen = 3
+			 * i = (4k + 2) .... xlen = 4
+			 * i = (4k + 3) .... xlen = 1
+			 */
+
+			if ((i % 4) == 3)
+				xlen = 1;
+			else
+				xlen = (i % 4) + 2;
+
+			data >>= (4 - xlen) * 8;
+
+			dev_dbg(i2c->dev,
+				"PIO: len=%i pos=%i total=%i [W%s%s%s]\n",
+				xlen, i, msg->len,
+				start & MXS_I2C_CTRL0_PRE_SEND_START ? "S" : "",
+				start & MXS_I2C_CTRL0_POST_SEND_STOP ? "E" : "",
+				start & MXS_I2C_CTRL0_RETAIN_CLOCK ? "C" : "");
+
+			writel(MXS_I2C_DEBUG0_DMAREQ,
+			       i2c->regs + MXS_I2C_DEBUG0_CLR(i2c));
+
+			mxs_i2c_pio_trigger_write_cmd(i2c,
+				start | MXS_I2C_CTRL0_MASTER_MODE |
+				MXS_I2C_CTRL0_DIRECTION |
+				MXS_I2C_CTRL0_XFER_COUNT(xlen), data);
+
+			/* The START condition is sent only once. */
+			start &= ~MXS_I2C_CTRL0_PRE_SEND_START;
+
+			/* Wait for the end of the transfer. */
+			ret = mxs_i2c_pio_wait_xfer_end(i2c);
+			if (ret) {
+				dev_dbg(i2c->dev,
+					"PIO: Failed to finish WRITE cmd!\n");
+				break;
+			}
+
+			/* Check NAK here. */
+			ret = readl(i2c->regs + MXS_I2C_STAT) &
+				    MXS_I2C_STAT_GOT_A_NAK;
+			if (ret) {
+				ret = -ENXIO;
+				goto cleanup;
+			}
+		}
+	}
+
+	/* make sure we capture any occurred error into cmd_err */
+	ret = mxs_i2c_pio_check_error_state(i2c);
+
+cleanup:
+	/* Clear any dangling IRQs and re-enable interrupts. */
+	writel(MXS_I2C_IRQ_MASK, i2c->regs + MXS_I2C_CTRL1_CLR);
+	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+	/* Clear the PIO_MODE on i.MX23 */
+	if (i2c->dev_type == MXS_I2C_V1)
+		writel(MXS_I2C_CTRL0_PIO_MODE, i2c->regs + MXS_I2C_CTRL0_CLR);
+
+	return ret;
+}
+
+/*
+ * Low level master read/write transaction.
+ */
+static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
+				int stop)
+{
+	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
+	int ret;
+	int flags;
+	int use_pio = 0;
+	unsigned long time_left;
+
+	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
+
+	dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
+		msg->addr, msg->len, msg->flags, stop);
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	/*
+	 * The MX28 I2C IP block can only do PIO READ for transfer of to up
+	 * 4 bytes of length. The write transfer is not limited as it can use
+	 * clock stretching to avoid FIFO underruns.
+	 */
+	if ((msg->flags & I2C_M_RD) && (msg->len <= 4))
+		use_pio = 1;
+	if (!(msg->flags & I2C_M_RD) && (msg->len < 7))
+		use_pio = 1;
+
+	i2c->cmd_err = 0;
+	if (use_pio) {
+		ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
+		/* No need to reset the block if NAK was received. */
+		if (ret && (ret != -ENXIO))
+			mxs_i2c_reset(i2c);
+	} else {
+		reinit_completion(&i2c->cmd_complete);
+		ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+		if (ret)
+			return ret;
+
+		time_left = wait_for_completion_timeout(&i2c->cmd_complete,
+						msecs_to_jiffies(1000));
+		if (!time_left)
+			goto timeout;
+
+		ret = i2c->cmd_err;
+	}
+
+	if (ret == -ENXIO) {
+		/*
+		 * If the transfer fails with a NAK from the slave the
+		 * controller halts until it gets told to return to idle state.
+		 */
+		writel(MXS_I2C_CTRL1_CLR_GOT_A_NAK,
+		       i2c->regs + MXS_I2C_CTRL1_SET);
+	}
+
+	/*
+	 * WARNING!
+	 * The i.MX23 is strange. After each and every operation, it's I2C IP
+	 * block must be reset, otherwise the IP block will misbehave. This can
+	 * be observed on the bus by the block sending out one single byte onto
+	 * the bus. In case such an error happens, bit 27 will be set in the
+	 * DEBUG0 register. This bit is not documented in the i.MX23 datasheet
+	 * and is marked as "TBD" instead. To reset this bit to a correct state,
+	 * reset the whole block. Since the block reset does not take long, do
+	 * reset the block after every transfer to play safe.
+	 */
+	if (i2c->dev_type == MXS_I2C_V1)
+		mxs_i2c_reset(i2c);
+
+	dev_dbg(i2c->dev, "Done with err=%d\n", ret);
+
+	return ret;
+
+timeout:
+	dev_dbg(i2c->dev, "Timeout!\n");
+	mxs_i2c_dma_finish(i2c);
+	ret = mxs_i2c_reset(i2c);
+	if (ret)
+		return ret;
+
+	return -ETIMEDOUT;
+}
+
+static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+			int num)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < num; i++) {
+		err = mxs_i2c_xfer_msg(adap, &msgs[i], i == (num - 1));
+		if (err)
+			return err;
+	}
+
+	return num;
+}
+
+static u32 mxs_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
+{
+	struct mxs_i2c_dev *i2c = dev_id;
+	u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
+
+	if (!stat)
+		return IRQ_NONE;
+
+	if (stat & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
+		i2c->cmd_err = -ENXIO;
+	else if (stat & (MXS_I2C_CTRL1_EARLY_TERM_IRQ |
+		    MXS_I2C_CTRL1_MASTER_LOSS_IRQ |
+		    MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ))
+		/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
+		i2c->cmd_err = -EIO;
+
+	writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static const struct i2c_algorithm mxs_i2c_algo = {
+	.master_xfer = mxs_i2c_xfer,
+	.functionality = mxs_i2c_func,
+};
+
+static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
+{
+	/* The I2C block clock runs at 24MHz */
+	const uint32_t clk = 24000000;
+	uint32_t divider;
+	uint16_t high_count, low_count, rcv_count, xmit_count;
+	uint32_t bus_free, leadin;
+	struct device *dev = i2c->dev;
+
+	divider = DIV_ROUND_UP(clk, speed);
+
+	if (divider < 25) {
+		/*
+		 * limit the divider, so that min(low_count, high_count)
+		 * is >= 1
+		 */
+		divider = 25;
+		dev_warn(dev,
+			"Speed too high (%u.%03u kHz), using %u.%03u kHz\n",
+			speed / 1000, speed % 1000,
+			clk / divider / 1000, clk / divider % 1000);
+	} else if (divider > 1897) {
+		/*
+		 * limit the divider, so that max(low_count, high_count)
+		 * cannot exceed 1023
+		 */
+		divider = 1897;
+		dev_warn(dev,
+			"Speed too low (%u.%03u kHz), using %u.%03u kHz\n",
+			speed / 1000, speed % 1000,
+			clk / divider / 1000, clk / divider % 1000);
+	}
+
+	/*
+	 * The I2C spec specifies the following timing data:
+	 *                          standard mode  fast mode Bitfield name
+	 * tLOW (SCL LOW period)     4700 ns        1300 ns
+	 * tHIGH (SCL HIGH period)   4000 ns         600 ns
+	 * tSU;DAT (data setup time)  250 ns         100 ns
+	 * tHD;STA (START hold time) 4000 ns         600 ns
+	 * tBUF (bus free time)      4700 ns        1300 ns
+	 *
+	 * The hardware (of the i.MX28 at least) seems to add 2 additional
+	 * clock cycles to the low_count and 7 cycles to the high_count.
+	 * This is compensated for by subtracting the respective constants
+	 * from the values written to the timing registers.
+	 */
+	if (speed > 100000) {
+		/* fast mode */
+		low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
+		high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
+		leadin = DIV_ROUND_UP(600 * (clk / 1000000), 1000);
+		bus_free = DIV_ROUND_UP(1300 * (clk / 1000000), 1000);
+	} else {
+		/* normal mode */
+		low_count = DIV_ROUND_CLOSEST(divider * 47, (47 + 40));
+		high_count = DIV_ROUND_CLOSEST(divider * 40, (47 + 40));
+		leadin = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+		bus_free = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+	}
+	rcv_count = high_count * 3 / 8;
+	xmit_count = low_count * 3 / 8;
+
+	dev_dbg(dev,
+		"speed=%u(actual %u) divider=%u low=%u high=%u xmit=%u rcv=%u leadin=%u bus_free=%u\n",
+		speed, clk / divider, divider, low_count, high_count,
+		xmit_count, rcv_count, leadin, bus_free);
+
+	low_count -= 2;
+	high_count -= 7;
+	i2c->timing0 = (high_count << 16) | rcv_count;
+	i2c->timing1 = (low_count << 16) | xmit_count;
+	i2c->timing2 = (bus_free << 16 | leadin);
+}
+
+static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
+{
+	uint32_t speed;
+	struct device *dev = i2c->dev;
+	struct device_node *node = dev->of_node;
+	int ret;
+
+	ret = of_property_read_u32(node, "clock-frequency", &speed);
+	if (ret) {
+		dev_warn(dev, "No I2C speed selected, using 100kHz\n");
+		speed = 100000;
+	}
+
+	mxs_i2c_derive_timing(i2c, speed);
+
+	return 0;
+}
+
+static const struct platform_device_id mxs_i2c_devtype[] = {
+	{
+		.name = "imx23-i2c",
+		.driver_data = MXS_I2C_V1,
+	}, {
+		.name = "imx28-i2c",
+		.driver_data = MXS_I2C_V2,
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_i2c_devtype);
+
+static const struct of_device_id mxs_i2c_dt_ids[] = {
+	{ .compatible = "fsl,imx23-i2c", .data = &mxs_i2c_devtype[0], },
+	{ .compatible = "fsl,imx28-i2c", .data = &mxs_i2c_devtype[1], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids);
+
+static int mxs_i2c_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+				of_match_device(mxs_i2c_dt_ids, &pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct mxs_i2c_dev *i2c;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int err, irq;
+
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (of_id) {
+		const struct platform_device_id *device_id = of_id->data;
+		i2c->dev_type = device_id->driver_data;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
+	if (err)
+		return err;
+
+	i2c->dev = dev;
+
+	init_completion(&i2c->cmd_complete);
+
+	if (dev->of_node) {
+		err = mxs_i2c_get_ofdata(i2c);
+		if (err)
+			return err;
+	}
+
+	/* Setup the DMA */
+	i2c->dmach = dma_request_slave_channel(dev, "rx-tx");
+	if (!i2c->dmach) {
+		dev_err(dev, "Failed to request dma\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, i2c);
+
+	/* Do reset to enforce correct startup after pinmuxing */
+	err = mxs_i2c_reset(i2c);
+	if (err)
+		return err;
+
+	adap = &i2c->adapter;
+	strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &mxs_i2c_algo;
+	adap->dev.parent = dev;
+	adap->nr = pdev->id;
+	adap->dev.of_node = pdev->dev.of_node;
+	i2c_set_adapdata(adap, i2c);
+	err = i2c_add_numbered_adapter(adap);
+	if (err) {
+		writel(MXS_I2C_CTRL0_SFTRST,
+				i2c->regs + MXS_I2C_CTRL0_SET);
+		return err;
+	}
+
+	return 0;
+}
+
+static int mxs_i2c_remove(struct platform_device *pdev)
+{
+	struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adapter);
+
+	if (i2c->dmach)
+		dma_release_channel(i2c->dmach);
+
+	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
+
+	return 0;
+}
+
+static struct platform_driver mxs_i2c_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .of_match_table = mxs_i2c_dt_ids,
+		   },
+	.probe = mxs_i2c_probe,
+	.remove = mxs_i2c_remove,
+};
+
+static int __init mxs_i2c_init(void)
+{
+	return platform_driver_register(&mxs_i2c_driver);
+}
+subsys_initcall(mxs_i2c_init);
+
+static void __exit mxs_i2c_exit(void)
+{
+	platform_driver_unregister(&mxs_i2c_driver);
+}
+module_exit(mxs_i2c_exit);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("MXS I2C Bus Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2-s4985.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2-s4985.c
new file mode 100644
index 0000000..88eda09
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -0,0 +1,249 @@
+/*
+ * i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard
+ *
+ * Copyright (C) 2008 Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * We select the channels by sending commands to the Philips
+ * PCA9556 chip at I2C address 0x18. The main adapter is used for
+ * the non-multiplexed part of the bus, and 4 virtual adapters
+ * are defined for the multiplexed addresses: 0x50-0x53 (memory
+ * module EEPROM) located on channels 1-4. We define one virtual
+ * adapter per CPU, which corresponds to one multiplexed channel:
+ *   CPU0: virtual adapter 1, channel 1
+ *   CPU1: virtual adapter 2, channel 2
+ *   CPU2: virtual adapter 3, channel 3
+ *   CPU3: virtual adapter 4, channel 4
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+extern struct i2c_adapter *nforce2_smbus;
+
+static struct i2c_adapter *s4985_adapter;
+static struct i2c_algorithm *s4985_algo;
+
+/* Wrapper access functions for multiplexed SMBus */
+static DEFINE_MUTEX(nforce2_lock);
+
+static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	int error;
+
+	/* We exclude the multiplexed addresses */
+	if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
+	 || addr == 0x18)
+		return -ENXIO;
+
+	mutex_lock(&nforce2_lock);
+	error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+						command, size, data);
+	mutex_unlock(&nforce2_lock);
+
+	return error;
+}
+
+/* We remember the last used channels combination so as to only switch
+   channels when it is really needed. This greatly reduces the SMBus
+   overhead, but also assumes that nobody will be writing to the PCA9556
+   in our back. */
+static u8 last_channels;
+
+static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr,
+					 unsigned short flags, char read_write,
+					 u8 command, int size,
+					 union i2c_smbus_data *data,
+					 u8 channels)
+{
+	int error;
+
+	/* We exclude the non-multiplexed addresses */
+	if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
+		return -ENXIO;
+
+	mutex_lock(&nforce2_lock);
+	if (last_channels != channels) {
+		union i2c_smbus_data mplxdata;
+		mplxdata.byte = channels;
+
+		error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0,
+							I2C_SMBUS_WRITE, 0x01,
+							I2C_SMBUS_BYTE_DATA,
+							&mplxdata);
+		if (error)
+			goto UNLOCK;
+		last_channels = channels;
+	}
+	error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+						command, size, data);
+
+UNLOCK:
+	mutex_unlock(&nforce2_lock);
+	return error;
+}
+
+static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU0: channel 1 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x02);
+}
+
+static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU1: channel 2 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x04);
+}
+
+static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU2: channel 3 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x08);
+}
+
+static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU3: channel 4 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x10);
+}
+
+static int __init nforce2_s4985_init(void)
+{
+	int i, error;
+	union i2c_smbus_data ioconfig;
+
+	if (!nforce2_smbus)
+		return -ENODEV;
+
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+			       I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR0;
+	}
+
+	/* Unregister physical bus */
+	i2c_del_adapter(nforce2_smbus);
+
+	printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n");
+	/* Define the 5 virtual adapters and algorithms structures */
+	s4985_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (!s4985_adapter) {
+		error = -ENOMEM;
+		goto ERROR1;
+	}
+	s4985_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL);
+	if (!s4985_algo) {
+		error = -ENOMEM;
+		goto ERROR2;
+	}
+
+	/* Fill in the new structures */
+	s4985_algo[0] = *(nforce2_smbus->algo);
+	s4985_algo[0].smbus_xfer = nforce2_access_virt0;
+	s4985_adapter[0] = *nforce2_smbus;
+	s4985_adapter[0].algo = s4985_algo;
+	s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent;
+	for (i = 1; i < 5; i++) {
+		s4985_algo[i] = *(nforce2_smbus->algo);
+		s4985_adapter[i] = *nforce2_smbus;
+		snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name),
+			 "SMBus nForce2 adapter (CPU%d)", i - 1);
+		s4985_adapter[i].algo = s4985_algo + i;
+		s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent;
+	}
+	s4985_algo[1].smbus_xfer = nforce2_access_virt1;
+	s4985_algo[2].smbus_xfer = nforce2_access_virt2;
+	s4985_algo[3].smbus_xfer = nforce2_access_virt3;
+	s4985_algo[4].smbus_xfer = nforce2_access_virt4;
+
+	/* Register virtual adapters */
+	for (i = 0; i < 5; i++) {
+		error = i2c_add_adapter(s4985_adapter + i);
+		if (error) {
+			printk(KERN_ERR "i2c-nforce2-s4985: "
+			       "Virtual adapter %d registration "
+			       "failed, module not inserted\n", i);
+			for (i--; i >= 0; i--)
+				i2c_del_adapter(s4985_adapter + i);
+			goto ERROR3;
+		}
+	}
+
+	return 0;
+
+ERROR3:
+	kfree(s4985_algo);
+	s4985_algo = NULL;
+ERROR2:
+	kfree(s4985_adapter);
+	s4985_adapter = NULL;
+ERROR1:
+	/* Restore physical bus */
+	i2c_add_adapter(nforce2_smbus);
+ERROR0:
+	return error;
+}
+
+static void __exit nforce2_s4985_exit(void)
+{
+	if (s4985_adapter) {
+		int i;
+
+		for (i = 0; i < 5; i++)
+			i2c_del_adapter(s4985_adapter+i);
+		kfree(s4985_adapter);
+		s4985_adapter = NULL;
+	}
+	kfree(s4985_algo);
+	s4985_algo = NULL;
+
+	/* Restore physical bus */
+	if (i2c_add_adapter(nforce2_smbus))
+		printk(KERN_ERR "i2c-nforce2-s4985: "
+		       "Physical bus restoration failed\n");
+}
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("S4985 SMBus multiplexing");
+MODULE_LICENSE("GPL");
+
+module_init(nforce2_s4985_init);
+module_exit(nforce2_s4985_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2.c
new file mode 100644
index 0000000..3241bb9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nforce2.c
@@ -0,0 +1,450 @@
+/*
+    SMBus driver for nVidia nForce2 MCP
+
+    Added nForce3 Pro 150  Thomas Leibold <thomas@plx.com>,
+	Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
+    Copyright (c) 2003  Hans-Frieder Vogt <hfvogt@arcor.de>,
+    Based on
+    SMBus 2.0 driver for AMD-8111 IO-Hub
+    Copyright (c) 2002 Vojtech Pavlik
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+    SUPPORTED DEVICES		PCI ID
+    nForce2 MCP			0064
+    nForce2 Ultra 400 MCP	0084
+    nForce3 Pro150 MCP		00D4
+    nForce3 250Gb MCP		00E4
+    nForce4 MCP			0052
+    nForce4 MCP-04		0034
+    nForce MCP51		0264
+    nForce MCP55		0368
+    nForce MCP61		03EB
+    nForce MCP65		0446
+    nForce MCP67		0542
+    nForce MCP73		07D8
+    nForce MCP78S		0752
+    nForce MCP79		0AA2
+
+    This driver supports the 2 SMBuses that are included in the MCP of the
+    nForce2/3/4/5xx chipsets.
+*/
+
+/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
+MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver");
+
+
+struct nforce2_smbus {
+	struct i2c_adapter adapter;
+	int base;
+	int size;
+	int blockops;
+	int can_abort;
+};
+
+
+/*
+ * nVidia nForce2 SMBus control register definitions
+ * (Newer incarnations use standard BARs 4 and 5 instead)
+ */
+#define NFORCE_PCI_SMB1	0x50
+#define NFORCE_PCI_SMB2	0x54
+
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+#define NVIDIA_SMB_PRTCL	(smbus->base + 0x00)	/* protocol, PEC */
+#define NVIDIA_SMB_STS		(smbus->base + 0x01)	/* status */
+#define NVIDIA_SMB_ADDR		(smbus->base + 0x02)	/* address */
+#define NVIDIA_SMB_CMD		(smbus->base + 0x03)	/* command */
+#define NVIDIA_SMB_DATA		(smbus->base + 0x04)	/* 32 data registers */
+#define NVIDIA_SMB_BCNT		(smbus->base + 0x24)	/* number of data
+							   bytes */
+#define NVIDIA_SMB_STATUS_ABRT	(smbus->base + 0x3c)	/* register used to
+							   check the status of
+							   the abort command */
+#define NVIDIA_SMB_CTRL		(smbus->base + 0x3e)	/* control register */
+
+#define NVIDIA_SMB_STATUS_ABRT_STS	0x01		/* Bit to notify that
+							   abort succeeded */
+#define NVIDIA_SMB_CTRL_ABORT	0x20
+#define NVIDIA_SMB_STS_DONE	0x80
+#define NVIDIA_SMB_STS_ALRM	0x40
+#define NVIDIA_SMB_STS_RES	0x20
+#define NVIDIA_SMB_STS_STATUS	0x1f
+
+#define NVIDIA_SMB_PRTCL_WRITE			0x00
+#define NVIDIA_SMB_PRTCL_READ			0x01
+#define NVIDIA_SMB_PRTCL_QUICK			0x02
+#define NVIDIA_SMB_PRTCL_BYTE			0x04
+#define NVIDIA_SMB_PRTCL_BYTE_DATA		0x06
+#define NVIDIA_SMB_PRTCL_WORD_DATA		0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA		0x0a
+#define NVIDIA_SMB_PRTCL_PEC			0x80
+
+/* Misc definitions */
+#define MAX_TIMEOUT	100
+
+/* We disable the second SMBus channel on these boards */
+static const struct dmi_system_id nforce2_dmi_blacklist2[] = {
+	{
+		.ident = "DFI Lanparty NF4 Expert",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "DFI Corp,LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "LP UT NF4 Expert"),
+		},
+	},
+	{ }
+};
+
+static struct pci_driver nforce2_driver;
+
+/* For multiplexing support, we need a global reference to the 1st
+   SMBus channel */
+#if IS_ENABLED(CONFIG_I2C_NFORCE2_S4985)
+struct i2c_adapter *nforce2_smbus;
+EXPORT_SYMBOL_GPL(nforce2_smbus);
+
+static void nforce2_set_reference(struct i2c_adapter *adap)
+{
+	nforce2_smbus = adap;
+}
+#else
+static inline void nforce2_set_reference(struct i2c_adapter *adap) { }
+#endif
+
+static void nforce2_abort(struct i2c_adapter *adap)
+{
+	struct nforce2_smbus *smbus = adap->algo_data;
+	int timeout = 0;
+	unsigned char temp;
+
+	dev_dbg(&adap->dev, "Aborting current transaction\n");
+
+	outb_p(NVIDIA_SMB_CTRL_ABORT, NVIDIA_SMB_CTRL);
+	do {
+		msleep(1);
+		temp = inb_p(NVIDIA_SMB_STATUS_ABRT);
+	} while (!(temp & NVIDIA_SMB_STATUS_ABRT_STS) &&
+			(timeout++ < MAX_TIMEOUT));
+	if (!(temp & NVIDIA_SMB_STATUS_ABRT_STS))
+		dev_err(&adap->dev, "Can't reset the smbus\n");
+	outb_p(NVIDIA_SMB_STATUS_ABRT_STS, NVIDIA_SMB_STATUS_ABRT);
+}
+
+static int nforce2_check_status(struct i2c_adapter *adap)
+{
+	struct nforce2_smbus *smbus = adap->algo_data;
+	int timeout = 0;
+	unsigned char temp;
+
+	do {
+		msleep(1);
+		temp = inb_p(NVIDIA_SMB_STS);
+	} while ((!temp) && (timeout++ < MAX_TIMEOUT));
+
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "SMBus Timeout!\n");
+		if (smbus->can_abort)
+			nforce2_abort(adap);
+		return -ETIMEDOUT;
+	}
+	if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
+		dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp);
+		return -EIO;
+	}
+	return 0;
+}
+
+/* Return negative errno on error */
+static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
+		unsigned short flags, char read_write,
+		u8 command, int size, union i2c_smbus_data *data)
+{
+	struct nforce2_smbus *smbus = adap->algo_data;
+	unsigned char protocol, pec;
+	u8 len;
+	int i, status;
+
+	protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
+		NVIDIA_SMB_PRTCL_WRITE;
+	pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		protocol |= NVIDIA_SMB_PRTCL_QUICK;
+		read_write = I2C_SMBUS_WRITE;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, NVIDIA_SMB_CMD);
+		protocol |= NVIDIA_SMB_PRTCL_BYTE;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(command, NVIDIA_SMB_CMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, NVIDIA_SMB_DATA);
+		protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(command, NVIDIA_SMB_CMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word, NVIDIA_SMB_DATA);
+			outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
+		}
+		protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(command, NVIDIA_SMB_CMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+				dev_err(&adap->dev,
+					"Transaction failed (requested block size: %d)\n",
+					len);
+				return -EINVAL;
+			}
+			outb_p(len, NVIDIA_SMB_BCNT);
+			for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+				outb_p(data->block[i + 1],
+				       NVIDIA_SMB_DATA + i);
+		}
+		protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+		break;
+
+	default:
+		dev_err(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
+	outb_p(protocol, NVIDIA_SMB_PRTCL);
+
+	status = nforce2_check_status(adap);
+	if (status)
+		return status;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		data->byte = inb_p(NVIDIA_SMB_DATA);
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		data->word = inb_p(NVIDIA_SMB_DATA) |
+			     (inb_p(NVIDIA_SMB_DATA + 1) << 8);
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		len = inb_p(NVIDIA_SMB_BCNT);
+		if ((len <= 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+			dev_err(&adap->dev,
+				"Transaction failed (received block size: 0x%02x)\n",
+				len);
+			return -EPROTO;
+		}
+		for (i = 0; i < len; i++)
+			data->block[i + 1] = inb_p(NVIDIA_SMB_DATA + i);
+		data->block[0] = len;
+		break;
+	}
+
+	return 0;
+}
+
+
+static u32 nforce2_func(struct i2c_adapter *adapter)
+{
+	/* other functionality might be possible, but is not tested */
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_PEC |
+	       (((struct nforce2_smbus *)adapter->algo_data)->blockops ?
+		I2C_FUNC_SMBUS_BLOCK_DATA : 0);
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= nforce2_access,
+	.functionality	= nforce2_func,
+};
+
+
+static const struct pci_device_id nforce2_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, nforce2_ids);
+
+
+static int nforce2_probe_smb(struct pci_dev *dev, int bar, int alt_reg,
+			     struct nforce2_smbus *smbus, const char *name)
+{
+	int error;
+
+	smbus->base = pci_resource_start(dev, bar);
+	if (smbus->base) {
+		smbus->size = pci_resource_len(dev, bar);
+	} else {
+		/* Older incarnations of the device used non-standard BARs */
+		u16 iobase;
+
+		if (pci_read_config_word(dev, alt_reg, &iobase)
+		    != PCIBIOS_SUCCESSFUL) {
+			dev_err(&dev->dev, "Error reading PCI config for %s\n",
+				name);
+			return -EIO;
+		}
+
+		smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
+		smbus->size = 64;
+	}
+
+	error = acpi_check_region(smbus->base, smbus->size,
+				  nforce2_driver.name);
+	if (error)
+		return error;
+
+	if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
+		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
+			smbus->base, smbus->base+smbus->size-1, name);
+		return -EBUSY;
+	}
+	smbus->adapter.owner = THIS_MODULE;
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	smbus->adapter.algo = &smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+	smbus->adapter.dev.parent = &dev->dev;
+	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
+		"SMBus nForce2 adapter at %04x", smbus->base);
+
+	error = i2c_add_adapter(&smbus->adapter);
+	if (error) {
+		release_region(smbus->base, smbus->size);
+		return error;
+	}
+	dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n",
+		smbus->base);
+	return 0;
+}
+
+
+static int nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct nforce2_smbus *smbuses;
+	int res1, res2;
+
+	/* we support 2 SMBus adapters */
+	smbuses = kzalloc(2 * sizeof(struct nforce2_smbus), GFP_KERNEL);
+	if (!smbuses)
+		return -ENOMEM;
+	pci_set_drvdata(dev, smbuses);
+
+	switch (dev->device) {
+	case PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS:
+	case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS:
+	case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS:
+		smbuses[0].blockops = 1;
+		smbuses[1].blockops = 1;
+		smbuses[0].can_abort = 1;
+		smbuses[1].can_abort = 1;
+	}
+
+	/* SMBus adapter 1 */
+	res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+	if (res1 < 0)
+		smbuses[0].base = 0;	/* to have a check value */
+
+	/* SMBus adapter 2 */
+	if (dmi_check_system(nforce2_dmi_blacklist2)) {
+		dev_err(&dev->dev, "Disabling SMB2 for safety reasons.\n");
+		res2 = -EPERM;
+		smbuses[1].base = 0;
+	} else {
+		res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1],
+					 "SMB2");
+		if (res2 < 0)
+			smbuses[1].base = 0;	/* to have a check value */
+	}
+
+	if ((res1 < 0) && (res2 < 0)) {
+		/* we did not find even one of the SMBuses, so we give up */
+		kfree(smbuses);
+		return -ENODEV;
+	}
+
+	nforce2_set_reference(&smbuses[0].adapter);
+	return 0;
+}
+
+
+static void nforce2_remove(struct pci_dev *dev)
+{
+	struct nforce2_smbus *smbuses = pci_get_drvdata(dev);
+
+	nforce2_set_reference(NULL);
+	if (smbuses[0].base) {
+		i2c_del_adapter(&smbuses[0].adapter);
+		release_region(smbuses[0].base, smbuses[0].size);
+	}
+	if (smbuses[1].base) {
+		i2c_del_adapter(&smbuses[1].adapter);
+		release_region(smbuses[1].base, smbuses[1].size);
+	}
+	kfree(smbuses);
+}
+
+static struct pci_driver nforce2_driver = {
+	.name		= "nForce2_smbus",
+	.id_table	= nforce2_ids,
+	.probe		= nforce2_probe,
+	.remove		= nforce2_remove,
+};
+
+module_pci_driver(nforce2_driver);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nomadik.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nomadik.c
new file mode 100644
index 0000000..49c7c0c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-nomadik.c
@@ -0,0 +1,1133 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ * Copyright (C) 2009 STMicroelectronics
+ *
+ * I2C master mode controller driver, used in Nomadik 8815
+ * and Ux500 platforms.
+ *
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/amba/bus.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+
+#define DRIVER_NAME "nmk-i2c"
+
+/* I2C Controller register offsets */
+#define I2C_CR		(0x000)
+#define I2C_SCR		(0x004)
+#define I2C_HSMCR	(0x008)
+#define I2C_MCR		(0x00C)
+#define I2C_TFR		(0x010)
+#define I2C_SR		(0x014)
+#define I2C_RFR		(0x018)
+#define I2C_TFTR	(0x01C)
+#define I2C_RFTR	(0x020)
+#define I2C_DMAR	(0x024)
+#define I2C_BRCR	(0x028)
+#define I2C_IMSCR	(0x02C)
+#define I2C_RISR	(0x030)
+#define I2C_MISR	(0x034)
+#define I2C_ICR		(0x038)
+
+/* Control registers */
+#define I2C_CR_PE		(0x1 << 0)	/* Peripheral Enable */
+#define I2C_CR_OM		(0x3 << 1)	/* Operating mode */
+#define I2C_CR_SAM		(0x1 << 3)	/* Slave addressing mode */
+#define I2C_CR_SM		(0x3 << 4)	/* Speed mode */
+#define I2C_CR_SGCM		(0x1 << 6)	/* Slave general call mode */
+#define I2C_CR_FTX		(0x1 << 7)	/* Flush Transmit */
+#define I2C_CR_FRX		(0x1 << 8)	/* Flush Receive */
+#define I2C_CR_DMA_TX_EN	(0x1 << 9)	/* DMA Tx enable */
+#define I2C_CR_DMA_RX_EN	(0x1 << 10)	/* DMA Rx Enable */
+#define I2C_CR_DMA_SLE		(0x1 << 11)	/* DMA sync. logic enable */
+#define I2C_CR_LM		(0x1 << 12)	/* Loopback mode */
+#define I2C_CR_FON		(0x3 << 13)	/* Filtering on */
+#define I2C_CR_FS		(0x3 << 15)	/* Force stop enable */
+
+/* Master controller (MCR) register */
+#define I2C_MCR_OP		(0x1 << 0)	/* Operation */
+#define I2C_MCR_A7		(0x7f << 1)	/* 7-bit address */
+#define I2C_MCR_EA10		(0x7 << 8)	/* 10-bit Extended address */
+#define I2C_MCR_SB		(0x1 << 11)	/* Extended address */
+#define I2C_MCR_AM		(0x3 << 12)	/* Address type */
+#define I2C_MCR_STOP		(0x1 << 14)	/* Stop condition */
+#define I2C_MCR_LENGTH		(0x7ff << 15)	/* Transaction length */
+
+/* Status register (SR) */
+#define I2C_SR_OP		(0x3 << 0)	/* Operation */
+#define I2C_SR_STATUS		(0x3 << 2)	/* controller status */
+#define I2C_SR_CAUSE		(0x7 << 4)	/* Abort cause */
+#define I2C_SR_TYPE		(0x3 << 7)	/* Receive type */
+#define I2C_SR_LENGTH		(0x7ff << 9)	/* Transfer length */
+
+/* Interrupt mask set/clear (IMSCR) bits */
+#define I2C_IT_TXFE		(0x1 << 0)
+#define I2C_IT_TXFNE		(0x1 << 1)
+#define I2C_IT_TXFF		(0x1 << 2)
+#define I2C_IT_TXFOVR		(0x1 << 3)
+#define I2C_IT_RXFE		(0x1 << 4)
+#define I2C_IT_RXFNF		(0x1 << 5)
+#define I2C_IT_RXFF		(0x1 << 6)
+#define I2C_IT_RFSR		(0x1 << 16)
+#define I2C_IT_RFSE		(0x1 << 17)
+#define I2C_IT_WTSR		(0x1 << 18)
+#define I2C_IT_MTD		(0x1 << 19)
+#define I2C_IT_STD		(0x1 << 20)
+#define I2C_IT_MAL		(0x1 << 24)
+#define I2C_IT_BERR		(0x1 << 25)
+#define I2C_IT_MTDWS		(0x1 << 28)
+
+#define GEN_MASK(val, mask, sb)  (((val) << (sb)) & (mask))
+
+/* some bits in ICR are reserved */
+#define I2C_CLEAR_ALL_INTS	0x131f007f
+
+/* first three msb bits are reserved */
+#define IRQ_MASK(mask)		(mask & 0x1fffffff)
+
+/* maximum threshold value */
+#define MAX_I2C_FIFO_THRESHOLD	15
+
+enum i2c_freq_mode {
+	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
+	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
+	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
+};
+
+/**
+ * struct i2c_vendor_data - per-vendor variations
+ * @has_mtdws: variant has the MTDWS bit
+ * @fifodepth: variant FIFO depth
+ */
+struct i2c_vendor_data {
+	bool has_mtdws;
+	u32 fifodepth;
+};
+
+enum i2c_status {
+	I2C_NOP,
+	I2C_ON_GOING,
+	I2C_OK,
+	I2C_ABORT
+};
+
+/* operation */
+enum i2c_operation {
+	I2C_NO_OPERATION = 0xff,
+	I2C_WRITE = 0x00,
+	I2C_READ = 0x01
+};
+
+/**
+ * struct i2c_nmk_client - client specific data
+ * @slave_adr: 7-bit slave address
+ * @count: no. bytes to be transferred
+ * @buffer: client data buffer
+ * @xfer_bytes: bytes transferred till now
+ * @operation: current I2C operation
+ */
+struct i2c_nmk_client {
+	unsigned short		slave_adr;
+	unsigned long		count;
+	unsigned char		*buffer;
+	unsigned long		xfer_bytes;
+	enum i2c_operation	operation;
+};
+
+/**
+ * struct nmk_i2c_dev - private data structure of the controller.
+ * @vendor: vendor data for this variant.
+ * @adev: parent amba device.
+ * @adap: corresponding I2C adapter.
+ * @irq: interrupt line for the controller.
+ * @virtbase: virtual io memory area.
+ * @clk: hardware i2c block clock.
+ * @cli: holder of client specific data.
+ * @clk_freq: clock frequency for the operation mode
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout (ms)
+ * @sm: speed mode
+ * @stop: stop condition.
+ * @xfer_complete: acknowledge completion for a I2C message.
+ * @result: controller propogated result.
+ */
+struct nmk_i2c_dev {
+	struct i2c_vendor_data		*vendor;
+	struct amba_device		*adev;
+	struct i2c_adapter		adap;
+	int				irq;
+	void __iomem			*virtbase;
+	struct clk			*clk;
+	struct i2c_nmk_client		cli;
+	u32				clk_freq;
+	unsigned char			tft;
+	unsigned char			rft;
+	int				timeout;
+	enum i2c_freq_mode		sm;
+	int				stop;
+	struct completion		xfer_complete;
+	int				result;
+};
+
+/* controller's abort causes */
+static const char *abort_causes[] = {
+	"no ack received after address transmission",
+	"no ack received during data phase",
+	"ack received after xmission of master code",
+	"master lost arbitration",
+	"slave restarts",
+	"slave reset",
+	"overflow, maxsize is 2047 bytes",
+};
+
+static inline void i2c_set_bit(void __iomem *reg, u32 mask)
+{
+	writel(readl(reg) | mask, reg);
+}
+
+static inline void i2c_clr_bit(void __iomem *reg, u32 mask)
+{
+	writel(readl(reg) & ~mask, reg);
+}
+
+/**
+ * flush_i2c_fifo() - This function flushes the I2C FIFO
+ * @dev: private data of I2C Driver
+ *
+ * This function flushes the I2C Tx and Rx FIFOs. It returns
+ * 0 on successful flushing of FIFO
+ */
+static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
+{
+#define LOOP_ATTEMPTS 10
+	int i;
+	unsigned long timeout;
+
+	/*
+	 * flush the transmit and receive FIFO. The flushing
+	 * operation takes several cycles before to be completed.
+	 * On the completion, the I2C internal logic clears these
+	 * bits, until then no one must access Tx, Rx FIFO and
+	 * should poll on these bits waiting for the completion.
+	 */
+	writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
+
+	for (i = 0; i < LOOP_ATTEMPTS; i++) {
+		timeout = jiffies + dev->adap.timeout;
+
+		while (!time_after(jiffies, timeout)) {
+			if ((readl(dev->virtbase + I2C_CR) &
+				(I2C_CR_FTX | I2C_CR_FRX)) == 0)
+					return 0;
+		}
+	}
+
+	dev_err(&dev->adev->dev,
+		"flushing operation timed out giving up after %d attempts",
+		LOOP_ATTEMPTS);
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * disable_all_interrupts() - Disable all interrupts of this I2c Bus
+ * @dev: private data of I2C Driver
+ */
+static void disable_all_interrupts(struct nmk_i2c_dev *dev)
+{
+	u32 mask = IRQ_MASK(0);
+	writel(mask, dev->virtbase + I2C_IMSCR);
+}
+
+/**
+ * clear_all_interrupts() - Clear all interrupts of I2C Controller
+ * @dev: private data of I2C Driver
+ */
+static void clear_all_interrupts(struct nmk_i2c_dev *dev)
+{
+	u32 mask;
+	mask = IRQ_MASK(I2C_CLEAR_ALL_INTS);
+	writel(mask, dev->virtbase + I2C_ICR);
+}
+
+/**
+ * init_hw() - initialize the I2C hardware
+ * @dev: private data of I2C Driver
+ */
+static int init_hw(struct nmk_i2c_dev *dev)
+{
+	int stat;
+
+	stat = flush_i2c_fifo(dev);
+	if (stat)
+		goto exit;
+
+	/* disable the controller */
+	i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+
+	disable_all_interrupts(dev);
+
+	clear_all_interrupts(dev);
+
+	dev->cli.operation = I2C_NO_OPERATION;
+
+exit:
+	return stat;
+}
+
+/* enable peripheral, master mode operation */
+#define DEFAULT_I2C_REG_CR	((1 << 1) | I2C_CR_PE)
+
+/**
+ * load_i2c_mcr_reg() - load the MCR register
+ * @dev: private data of controller
+ * @flags: message flags
+ */
+static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
+{
+	u32 mcr = 0;
+	unsigned short slave_adr_3msb_bits;
+
+	mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
+
+	if (unlikely(flags & I2C_M_TEN)) {
+		/* 10-bit address transaction */
+		mcr |= GEN_MASK(2, I2C_MCR_AM, 12);
+		/*
+		 * Get the top 3 bits.
+		 * EA10 represents extended address in MCR. This includes
+		 * the extension (MSB bits) of the 7 bit address loaded
+		 * in A7
+		 */
+		slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7;
+
+		mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8);
+	} else {
+		/* 7-bit address transaction */
+		mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
+	}
+
+	/* start byte procedure not applied */
+	mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
+
+	/* check the operation, master read/write? */
+	if (dev->cli.operation == I2C_WRITE)
+		mcr |= GEN_MASK(I2C_WRITE, I2C_MCR_OP, 0);
+	else
+		mcr |= GEN_MASK(I2C_READ, I2C_MCR_OP, 0);
+
+	/* stop or repeated start? */
+	if (dev->stop)
+		mcr |= GEN_MASK(1, I2C_MCR_STOP, 14);
+	else
+		mcr &= ~(GEN_MASK(1, I2C_MCR_STOP, 14));
+
+	mcr |= GEN_MASK(dev->cli.count, I2C_MCR_LENGTH, 15);
+
+	return mcr;
+}
+
+/**
+ * setup_i2c_controller() - setup the controller
+ * @dev: private data of controller
+ */
+static void setup_i2c_controller(struct nmk_i2c_dev *dev)
+{
+	u32 brcr1, brcr2;
+	u32 i2c_clk, div;
+	u32 ns;
+	u16 slsu;
+
+	writel(0x0, dev->virtbase + I2C_CR);
+	writel(0x0, dev->virtbase + I2C_HSMCR);
+	writel(0x0, dev->virtbase + I2C_TFTR);
+	writel(0x0, dev->virtbase + I2C_RFTR);
+	writel(0x0, dev->virtbase + I2C_DMAR);
+
+	i2c_clk = clk_get_rate(dev->clk);
+
+	/*
+	 * set the slsu:
+	 *
+	 * slsu defines the data setup time after SCL clock
+	 * stretching in terms of i2c clk cycles + 1 (zero means
+	 * "wait one cycle"), the needed setup time for the three
+	 * modes are 250ns, 100ns, 10ns respectively.
+	 *
+	 * As the time for one cycle T in nanoseconds is
+	 * T = (1/f) * 1000000000 =>
+	 * slsu = cycles / (1000000000 / f) + 1
+	 */
+	ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
+	switch (dev->sm) {
+	case I2C_FREQ_MODE_FAST:
+	case I2C_FREQ_MODE_FAST_PLUS:
+		slsu = DIV_ROUND_UP(100, ns); /* Fast */
+		break;
+	case I2C_FREQ_MODE_HIGH_SPEED:
+		slsu = DIV_ROUND_UP(10, ns); /* High */
+		break;
+	case I2C_FREQ_MODE_STANDARD:
+	default:
+		slsu = DIV_ROUND_UP(250, ns); /* Standard */
+		break;
+	}
+	slsu += 1;
+
+	dev_dbg(&dev->adev->dev, "calculated SLSU = %04x\n", slsu);
+	writel(slsu << 16, dev->virtbase + I2C_SCR);
+
+	/*
+	 * The spec says, in case of std. mode the divider is
+	 * 2 whereas it is 3 for fast and fastplus mode of
+	 * operation. TODO - high speed support.
+	 */
+	div = (dev->clk_freq > 100000) ? 3 : 2;
+
+	/*
+	 * generate the mask for baud rate counters. The controller
+	 * has two baud rate counters. One is used for High speed
+	 * operation, and the other is for std, fast mode, fast mode
+	 * plus operation. Currently we do not supprt high speed mode
+	 * so set brcr1 to 0.
+	 */
+	brcr1 = 0 << 16;
+	brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
+
+	/* set the baud rate counter register */
+	writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+
+	/*
+	 * set the speed mode. Currently we support
+	 * only standard and fast mode of operation
+	 * TODO - support for fast mode plus (up to 1Mb/s)
+	 * and high speed (up to 3.4 Mb/s)
+	 */
+	if (dev->sm > I2C_FREQ_MODE_FAST) {
+		dev_err(&dev->adev->dev,
+			"do not support this mode defaulting to std. mode\n");
+		brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+		writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+		writel(I2C_FREQ_MODE_STANDARD << 4,
+				dev->virtbase + I2C_CR);
+	}
+	writel(dev->sm << 4, dev->virtbase + I2C_CR);
+
+	/* set the Tx and Rx FIFO threshold */
+	writel(dev->tft, dev->virtbase + I2C_TFTR);
+	writel(dev->rft, dev->virtbase + I2C_RFTR);
+}
+
+/**
+ * read_i2c() - Read from I2C client device
+ * @dev: private data of I2C Driver
+ * @flags: message flags
+ *
+ * This function reads from i2c client device when controller is in
+ * master mode. There is a completion timeout. If there is no transfer
+ * before timeout error is returned.
+ */
+static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
+{
+	int status = 0;
+	u32 mcr, irq_mask;
+	unsigned long timeout;
+
+	mcr = load_i2c_mcr_reg(dev, flags);
+	writel(mcr, dev->virtbase + I2C_MCR);
+
+	/* load the current CR value */
+	writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+			dev->virtbase + I2C_CR);
+
+	/* enable the controller */
+	i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+
+	init_completion(&dev->xfer_complete);
+
+	/* enable interrupts by setting the mask */
+	irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
+			I2C_IT_MAL | I2C_IT_BERR);
+
+	if (dev->stop || !dev->vendor->has_mtdws)
+		irq_mask |= I2C_IT_MTD;
+	else
+		irq_mask |= I2C_IT_MTDWS;
+
+	irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+
+	writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
+			dev->virtbase + I2C_IMSCR);
+
+	timeout = wait_for_completion_timeout(
+		&dev->xfer_complete, dev->adap.timeout);
+
+	if (timeout == 0) {
+		/* Controller timed out */
+		dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
+				dev->cli.slave_adr);
+		status = -ETIMEDOUT;
+	}
+	return status;
+}
+
+static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+{
+	int count;
+
+	for (count = (no_bytes - 2);
+			(count > 0) &&
+			(dev->cli.count != 0);
+			count--) {
+		/* write to the Tx FIFO */
+		writeb(*dev->cli.buffer,
+			dev->virtbase + I2C_TFR);
+		dev->cli.buffer++;
+		dev->cli.count--;
+		dev->cli.xfer_bytes++;
+	}
+
+}
+
+/**
+ * write_i2c() - Write data to I2C client.
+ * @dev: private data of I2C Driver
+ * @flags: message flags
+ *
+ * This function writes data to I2C client
+ */
+static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
+{
+	u32 status = 0;
+	u32 mcr, irq_mask;
+	unsigned long timeout;
+
+	mcr = load_i2c_mcr_reg(dev, flags);
+
+	writel(mcr, dev->virtbase + I2C_MCR);
+
+	/* load the current CR value */
+	writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+			dev->virtbase + I2C_CR);
+
+	/* enable the controller */
+	i2c_set_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+
+	init_completion(&dev->xfer_complete);
+
+	/* enable interrupts by settings the masks */
+	irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
+
+	/* Fill the TX FIFO with transmit data */
+	fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+
+	if (dev->cli.count != 0)
+		irq_mask |= I2C_IT_TXFNE;
+
+	/*
+	 * check if we want to transfer a single or multiple bytes, if so
+	 * set the MTDWS bit (Master Transaction Done Without Stop)
+	 * to start repeated start operation
+	 */
+	if (dev->stop || !dev->vendor->has_mtdws)
+		irq_mask |= I2C_IT_MTD;
+	else
+		irq_mask |= I2C_IT_MTDWS;
+
+	irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+
+	writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
+			dev->virtbase + I2C_IMSCR);
+
+	timeout = wait_for_completion_timeout(
+		&dev->xfer_complete, dev->adap.timeout);
+
+	if (timeout == 0) {
+		/* Controller timed out */
+		dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
+				dev->cli.slave_adr);
+		status = -ETIMEDOUT;
+	}
+
+	return status;
+}
+
+/**
+ * nmk_i2c_xfer_one() - transmit a single I2C message
+ * @dev: device with a message encoded into it
+ * @flags: message flags
+ */
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+{
+	int status;
+
+	if (flags & I2C_M_RD) {
+		/* read operation */
+		dev->cli.operation = I2C_READ;
+		status = read_i2c(dev, flags);
+	} else {
+		/* write operation */
+		dev->cli.operation = I2C_WRITE;
+		status = write_i2c(dev, flags);
+	}
+
+	if (status || (dev->result)) {
+		u32 i2c_sr;
+		u32 cause;
+
+		i2c_sr = readl(dev->virtbase + I2C_SR);
+		/*
+		 * Check if the controller I2C operation status
+		 * is set to ABORT(11b).
+		 */
+		if (((i2c_sr >> 2) & 0x3) == 0x3) {
+			/* get the abort cause */
+			cause =	(i2c_sr >> 4) & 0x7;
+			dev_err(&dev->adev->dev, "%s\n",
+				cause >= ARRAY_SIZE(abort_causes) ?
+				"unknown reason" :
+				abort_causes[cause]);
+		}
+
+		(void) init_hw(dev);
+
+		status = status ? status : dev->result;
+	}
+
+	return status;
+}
+
+/**
+ * nmk_i2c_xfer() - I2C transfer function used by kernel framework
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num_msgs: Number of messages to be executed
+ *
+ * This is the function called by the generic kernel i2c_transfer()
+ * or i2c_smbus...() API calls. Note that this code is protected by the
+ * semaphore set in the kernel i2c_transfer() function.
+ *
+ * NOTE:
+ * READ TRANSFER : We impose a restriction of the first message to be the
+ *		index message for any read transaction.
+ *		- a no index is coded as '0',
+ *		- 2byte big endian index is coded as '3'
+ *		!!! msg[0].buf holds the actual index.
+ *		This is compatible with generic messages of smbus emulator
+ *		that send a one byte index.
+ *		eg. a I2C transation to read 2 bytes from index 0
+ *			idx = 0;
+ *			msg[0].addr = client->addr;
+ *			msg[0].flags = 0x0;
+ *			msg[0].len = 1;
+ *			msg[0].buf = &idx;
+ *
+ *			msg[1].addr = client->addr;
+ *			msg[1].flags = I2C_M_RD;
+ *			msg[1].len = 2;
+ *			msg[1].buf = rd_buff
+ *			i2c_transfer(adap, msg, 2);
+ *
+ * WRITE TRANSFER : The I2C standard interface interprets all data as payload.
+ *		If you want to emulate an SMBUS write transaction put the
+ *		index as first byte(or first and second) in the payload.
+ *		eg. a I2C transation to write 2 bytes from index 1
+ *			wr_buff[0] = 0x1;
+ *			wr_buff[1] = 0x23;
+ *			wr_buff[2] = 0x46;
+ *			msg[0].flags = 0x0;
+ *			msg[0].len = 3;
+ *			msg[0].buf = wr_buff;
+ *			i2c_transfer(adap, msg, 1);
+ *
+ * To read or write a block of data (multiple bytes) using SMBUS emulation
+ * please use the i2c_smbus_read_i2c_block_data()
+ * or i2c_smbus_write_i2c_block_data() API
+ */
+static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
+		struct i2c_msg msgs[], int num_msgs)
+{
+	int status = 0;
+	int i;
+	struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+	int j;
+
+	pm_runtime_get_sync(&dev->adev->dev);
+
+	/* Attempt three times to send the message queue */
+	for (j = 0; j < 3; j++) {
+		/* setup the i2c controller */
+		setup_i2c_controller(dev);
+
+		for (i = 0; i < num_msgs; i++) {
+			dev->cli.slave_adr	= msgs[i].addr;
+			dev->cli.buffer		= msgs[i].buf;
+			dev->cli.count		= msgs[i].len;
+			dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
+			dev->result = 0;
+
+			status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+			if (status != 0)
+				break;
+		}
+		if (status == 0)
+			break;
+	}
+
+	pm_runtime_put_sync(&dev->adev->dev);
+
+	/* return the no. messages processed */
+	if (status)
+		return status;
+	else
+		return num_msgs;
+}
+
+/**
+ * disable_interrupts() - disable the interrupts
+ * @dev: private data of controller
+ * @irq: interrupt number
+ */
+static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
+{
+	irq = IRQ_MASK(irq);
+	writel(readl(dev->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq),
+			dev->virtbase + I2C_IMSCR);
+	return 0;
+}
+
+/**
+ * i2c_irq_handler() - interrupt routine
+ * @irq: interrupt number
+ * @arg: data passed to the handler
+ *
+ * This is the interrupt handler for the i2c driver. Currently
+ * it handles the major interrupts like Rx & Tx FIFO management
+ * interrupts, master transaction interrupts, arbitration and
+ * bus error interrupts. The rest of the interrupts are treated as
+ * unhandled.
+ */
+static irqreturn_t i2c_irq_handler(int irq, void *arg)
+{
+	struct nmk_i2c_dev *dev = arg;
+	u32 tft, rft;
+	u32 count;
+	u32 misr, src;
+
+	/* load Tx FIFO and Rx FIFO threshold values */
+	tft = readl(dev->virtbase + I2C_TFTR);
+	rft = readl(dev->virtbase + I2C_RFTR);
+
+	/* read interrupt status register */
+	misr = readl(dev->virtbase + I2C_MISR);
+
+	src = __ffs(misr);
+	switch ((1 << src)) {
+
+	/* Transmit FIFO nearly empty interrupt */
+	case I2C_IT_TXFNE:
+	{
+		if (dev->cli.operation == I2C_READ) {
+			/*
+			 * in read operation why do we care for writing?
+			 * so disable the Transmit FIFO interrupt
+			 */
+			disable_interrupts(dev, I2C_IT_TXFNE);
+		} else {
+			fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
+			/*
+			 * if done, close the transfer by disabling the
+			 * corresponding TXFNE interrupt
+			 */
+			if (dev->cli.count == 0)
+				disable_interrupts(dev,	I2C_IT_TXFNE);
+		}
+	}
+	break;
+
+	/*
+	 * Rx FIFO nearly full interrupt.
+	 * This is set when the numer of entries in Rx FIFO is
+	 * greater or equal than the threshold value programmed
+	 * in RFT
+	 */
+	case I2C_IT_RXFNF:
+		for (count = rft; count > 0; count--) {
+			/* Read the Rx FIFO */
+			*dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
+			dev->cli.buffer++;
+		}
+		dev->cli.count -= rft;
+		dev->cli.xfer_bytes += rft;
+		break;
+
+	/* Rx FIFO full */
+	case I2C_IT_RXFF:
+		for (count = MAX_I2C_FIFO_THRESHOLD; count > 0; count--) {
+			*dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
+			dev->cli.buffer++;
+		}
+		dev->cli.count -= MAX_I2C_FIFO_THRESHOLD;
+		dev->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
+		break;
+
+	/* Master Transaction Done with/without stop */
+	case I2C_IT_MTD:
+	case I2C_IT_MTDWS:
+		if (dev->cli.operation == I2C_READ) {
+			while (!(readl(dev->virtbase + I2C_RISR)
+				 & I2C_IT_RXFE)) {
+				if (dev->cli.count == 0)
+					break;
+				*dev->cli.buffer =
+					readb(dev->virtbase + I2C_RFR);
+				dev->cli.buffer++;
+				dev->cli.count--;
+				dev->cli.xfer_bytes++;
+			}
+		}
+
+		disable_all_interrupts(dev);
+		clear_all_interrupts(dev);
+
+		if (dev->cli.count) {
+			dev->result = -EIO;
+			dev_err(&dev->adev->dev,
+				"%lu bytes still remain to be xfered\n",
+				dev->cli.count);
+			(void) init_hw(dev);
+		}
+		complete(&dev->xfer_complete);
+
+		break;
+
+	/* Master Arbitration lost interrupt */
+	case I2C_IT_MAL:
+		dev->result = -EIO;
+		(void) init_hw(dev);
+
+		i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
+		complete(&dev->xfer_complete);
+
+		break;
+
+	/*
+	 * Bus Error interrupt.
+	 * This happens when an unexpected start/stop condition occurs
+	 * during the transaction.
+	 */
+	case I2C_IT_BERR:
+		dev->result = -EIO;
+		/* get the status */
+		if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
+			(void) init_hw(dev);
+
+		i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_BERR);
+		complete(&dev->xfer_complete);
+
+		break;
+
+	/*
+	 * Tx FIFO overrun interrupt.
+	 * This is set when a write operation in Tx FIFO is performed and
+	 * the Tx FIFO is full.
+	 */
+	case I2C_IT_TXFOVR:
+		dev->result = -EIO;
+		(void) init_hw(dev);
+
+		dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
+		complete(&dev->xfer_complete);
+
+		break;
+
+	/* unhandled interrupts by this driver - TODO*/
+	case I2C_IT_TXFE:
+	case I2C_IT_TXFF:
+	case I2C_IT_RXFE:
+	case I2C_IT_RFSR:
+	case I2C_IT_RFSE:
+	case I2C_IT_WTSR:
+	case I2C_IT_STD:
+		dev_err(&dev->adev->dev, "unhandled Interrupt\n");
+		break;
+	default:
+		dev_err(&dev->adev->dev, "spurious Interrupt..\n");
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int nmk_i2c_suspend_late(struct device *dev)
+{
+	int ret;
+
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		return ret;
+
+	pinctrl_pm_select_sleep_state(dev);
+	return 0;
+}
+
+static int nmk_i2c_resume_early(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int nmk_i2c_runtime_suspend(struct device *dev)
+{
+	struct amba_device *adev = to_amba_device(dev);
+	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+
+	clk_disable_unprepare(nmk_i2c->clk);
+	pinctrl_pm_select_idle_state(dev);
+	return 0;
+}
+
+static int nmk_i2c_runtime_resume(struct device *dev)
+{
+	struct amba_device *adev = to_amba_device(dev);
+	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+	int ret;
+
+	ret = clk_prepare_enable(nmk_i2c->clk);
+	if (ret) {
+		dev_err(dev, "can't prepare_enable clock\n");
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(dev);
+
+	ret = init_hw(nmk_i2c);
+	if (ret) {
+		clk_disable_unprepare(nmk_i2c->clk);
+		pinctrl_pm_select_idle_state(dev);
+	}
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops nmk_i2c_pm = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(nmk_i2c_suspend_late, nmk_i2c_resume_early)
+	SET_RUNTIME_PM_OPS(nmk_i2c_runtime_suspend,
+			nmk_i2c_runtime_resume,
+			NULL)
+};
+
+static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm nmk_i2c_algo = {
+	.master_xfer	= nmk_i2c_xfer,
+	.functionality	= nmk_i2c_functionality
+};
+
+static void nmk_i2c_of_probe(struct device_node *np,
+			     struct nmk_i2c_dev *nmk)
+{
+	/* Default to 100 kHz if no frequency is given in the node */
+	if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
+		nmk->clk_freq = 100000;
+
+	/* This driver only supports 'standard' and 'fast' modes of operation. */
+	if (nmk->clk_freq <= 100000)
+		nmk->sm = I2C_FREQ_MODE_STANDARD;
+	else
+		nmk->sm = I2C_FREQ_MODE_FAST;
+	nmk->tft = 1; /* Tx FIFO threshold */
+	nmk->rft = 8; /* Rx FIFO threshold */
+	nmk->timeout = 200; /* Slave response timeout(ms) */
+}
+
+static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	int ret = 0;
+	struct device_node *np = adev->dev.of_node;
+	struct nmk_i2c_dev	*dev;
+	struct i2c_adapter *adap;
+	struct i2c_vendor_data *vendor = id->data;
+	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
+
+	dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&adev->dev, "cannot allocate memory\n");
+		ret = -ENOMEM;
+		goto err_no_mem;
+	}
+	dev->vendor = vendor;
+	dev->adev = adev;
+	nmk_i2c_of_probe(np, dev);
+
+	if (dev->tft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+			 dev->tft, max_fifo_threshold);
+		dev->tft = max_fifo_threshold;
+	}
+
+	if (dev->rft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+			dev->rft, max_fifo_threshold);
+		dev->rft = max_fifo_threshold;
+	}
+
+	amba_set_drvdata(adev, dev);
+
+	dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
+				resource_size(&adev->res));
+	if (!dev->virtbase) {
+		ret = -ENOMEM;
+		goto err_no_mem;
+	}
+
+	dev->irq = adev->irq[0];
+	ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
+				DRIVER_NAME, dev);
+	if (ret) {
+		dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
+		goto err_no_mem;
+	}
+
+	pm_suspend_ignore_children(&adev->dev, true);
+
+	dev->clk = devm_clk_get(&adev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		dev_err(&adev->dev, "could not get i2c clock\n");
+		ret = PTR_ERR(dev->clk);
+		goto err_no_mem;
+	}
+
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		dev_err(&adev->dev, "can't prepare_enable clock\n");
+		goto err_no_mem;
+	}
+
+	init_hw(dev);
+
+	adap = &dev->adap;
+	adap->dev.of_node = np;
+	adap->dev.parent = &adev->dev;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DEPRECATED;
+	adap->algo = &nmk_i2c_algo;
+	adap->timeout = msecs_to_jiffies(dev->timeout);
+	snprintf(adap->name, sizeof(adap->name),
+		 "Nomadik I2C at %pR", &adev->res);
+
+	i2c_set_adapdata(adap, dev);
+
+	dev_info(&adev->dev,
+		 "initialize %s on virtual base %p\n",
+		 adap->name, dev->virtbase);
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		goto err_no_adap;
+
+	pm_runtime_put(&adev->dev);
+
+	return 0;
+
+ err_no_adap:
+	clk_disable_unprepare(dev->clk);
+ err_no_mem:
+
+	return ret;
+}
+
+static int nmk_i2c_remove(struct amba_device *adev)
+{
+	struct resource *res = &adev->res;
+	struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
+
+	i2c_del_adapter(&dev->adap);
+	flush_i2c_fifo(dev);
+	disable_all_interrupts(dev);
+	clear_all_interrupts(dev);
+	/* disable the controller */
+	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+	clk_disable_unprepare(dev->clk);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+
+	return 0;
+}
+
+static struct i2c_vendor_data vendor_stn8815 = {
+	.has_mtdws = false,
+	.fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */
+};
+
+static struct i2c_vendor_data vendor_db8500 = {
+	.has_mtdws = true,
+	.fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
+};
+
+static const struct amba_id nmk_i2c_ids[] = {
+	{
+		.id	= 0x00180024,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_stn8815,
+	},
+	{
+		.id	= 0x00380024,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_db8500,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(amba, nmk_i2c_ids);
+
+static struct amba_driver nmk_i2c_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = DRIVER_NAME,
+		.pm = &nmk_i2c_pm,
+	},
+	.id_table = nmk_i2c_ids,
+	.probe = nmk_i2c_probe,
+	.remove = nmk_i2c_remove,
+};
+
+static int __init nmk_i2c_init(void)
+{
+	return amba_driver_register(&nmk_i2c_driver);
+}
+
+static void __exit nmk_i2c_exit(void)
+{
+	amba_driver_unregister(&nmk_i2c_driver);
+}
+
+subsys_initcall(nmk_i2c_init);
+module_exit(nmk_i2c_exit);
+
+MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
+MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ocores.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ocores.c
new file mode 100644
index 0000000..8c42ca7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-ocores.c
@@ -0,0 +1,585 @@
+/*
+ * i2c-ocores.c: I2C bus driver for OpenCores I2C controller
+ * (http://www.opencores.org/projects.cgi/web/i2c/overview).
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * Support for the GRLIB port of the controller by
+ * Andreas Larsson <andreas@gaisler.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-ocores.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+
+struct ocores_i2c {
+	void __iomem *base;
+	u32 reg_shift;
+	u32 reg_io_width;
+	wait_queue_head_t wait;
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	int pos;
+	int nmsgs;
+	int state; /* see STATE_ */
+	struct clk *clk;
+	int ip_clock_khz;
+	int bus_clock_khz;
+	void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value);
+	u8 (*getreg)(struct ocores_i2c *i2c, int reg);
+};
+
+/* registers */
+#define OCI2C_PRELOW		0
+#define OCI2C_PREHIGH		1
+#define OCI2C_CONTROL		2
+#define OCI2C_DATA		3
+#define OCI2C_CMD		4 /* write only */
+#define OCI2C_STATUS		4 /* read only, same address as OCI2C_CMD */
+
+#define OCI2C_CTRL_IEN		0x40
+#define OCI2C_CTRL_EN		0x80
+
+#define OCI2C_CMD_START		0x91
+#define OCI2C_CMD_STOP		0x41
+#define OCI2C_CMD_READ		0x21
+#define OCI2C_CMD_WRITE		0x11
+#define OCI2C_CMD_READ_ACK	0x21
+#define OCI2C_CMD_READ_NACK	0x29
+#define OCI2C_CMD_IACK		0x01
+
+#define OCI2C_STAT_IF		0x01
+#define OCI2C_STAT_TIP		0x02
+#define OCI2C_STAT_ARBLOST	0x20
+#define OCI2C_STAT_BUSY		0x40
+#define OCI2C_STAT_NACK		0x80
+
+#define STATE_DONE		0
+#define STATE_START		1
+#define STATE_WRITE		2
+#define STATE_READ		3
+#define STATE_ERROR		4
+
+#define TYPE_OCORES		0
+#define TYPE_GRLIB		1
+
+static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite8(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite16(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite32(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite16be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite32be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg)
+{
+	return ioread8(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg)
+{
+	return ioread16(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg)
+{
+	return ioread32(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg)
+{
+	return ioread16be(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
+{
+	return ioread32be(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	i2c->setreg(i2c, reg, value);
+}
+
+static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
+{
+	return i2c->getreg(i2c, reg);
+}
+
+static void ocores_process(struct ocores_i2c *i2c)
+{
+	struct i2c_msg *msg = i2c->msg;
+	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+
+	if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) {
+		/* stop has been sent */
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+		wake_up(&i2c->wait);
+		return;
+	}
+
+	/* error? */
+	if (stat & OCI2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+		return;
+	}
+
+	if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) {
+		i2c->state =
+			(msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & OCI2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	} else
+		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
+
+	/* end of msg? */
+	if (i2c->pos == msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {	/* end? */
+			/* send start? */
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				u8 addr = i2c_8bit_addr_from_msg(msg);
+
+				i2c->state = STATE_START;
+
+				oc_setreg(i2c, OCI2C_DATA, addr);
+				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
+				return;
+			} else
+				i2c->state = (msg->flags & I2C_M_RD)
+					? STATE_READ : STATE_WRITE;
+		} else {
+			i2c->state = STATE_DONE;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ?
+			  OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK);
+	} else {
+		oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]);
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE);
+	}
+}
+
+static irqreturn_t ocores_isr(int irq, void *dev_id)
+{
+	struct ocores_i2c *i2c = dev_id;
+
+	ocores_process(i2c);
+
+	return IRQ_HANDLED;
+}
+
+static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct ocores_i2c *i2c = i2c_get_adapdata(adap);
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_START;
+
+	oc_setreg(i2c, OCI2C_DATA,
+			(i2c->msg->addr << 1) |
+			((i2c->msg->flags & I2C_M_RD) ? 1:0));
+
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+
+	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+			       (i2c->state == STATE_DONE), HZ))
+		return (i2c->state == STATE_DONE) ? num : -EIO;
+	else
+		return -ETIMEDOUT;
+}
+
+static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
+{
+	int prescale;
+	int diff;
+	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+	/* make sure the device is disabled */
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1;
+	prescale = clamp(prescale, 0, 0xffff);
+
+	diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz;
+	if (abs(diff) > i2c->bus_clock_khz / 10) {
+		dev_err(dev,
+			"Unsupported clock settings: core: %d KHz, bus: %d KHz\n",
+			i2c->ip_clock_khz, i2c->bus_clock_khz);
+		return -EINVAL;
+	}
+
+	oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
+	oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
+
+	/* Init the device */
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN);
+
+	return 0;
+}
+
+
+static u32 ocores_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm ocores_algorithm = {
+	.master_xfer = ocores_xfer,
+	.functionality = ocores_func,
+};
+
+static const struct i2c_adapter ocores_adapter = {
+	.owner = THIS_MODULE,
+	.name = "i2c-ocores",
+	.class = I2C_CLASS_DEPRECATED,
+	.algo = &ocores_algorithm,
+};
+
+static const struct of_device_id ocores_i2c_match[] = {
+	{
+		.compatible = "opencores,i2c-ocores",
+		.data = (void *)TYPE_OCORES,
+	},
+	{
+		.compatible = "aeroflexgaisler,i2cmst",
+		.data = (void *)TYPE_GRLIB,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ocores_i2c_match);
+
+#ifdef CONFIG_OF
+/* Read and write functions for the GRLIB port of the controller. Registers are
+ * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
+ * register. The subsequent registers has their offset decreased accordingly. */
+static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
+{
+	u32 rd;
+	int rreg = reg;
+	if (reg != OCI2C_PRELOW)
+		rreg--;
+	rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
+	if (reg == OCI2C_PREHIGH)
+		return (u8)(rd >> 8);
+	else
+		return (u8)rd;
+}
+
+static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	u32 curr, wr;
+	int rreg = reg;
+	if (reg != OCI2C_PRELOW)
+		rreg--;
+	if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
+		curr = ioread32be(i2c->base + (rreg << i2c->reg_shift));
+		if (reg == OCI2C_PRELOW)
+			wr = (curr & 0xff00) | value;
+		else
+			wr = (((u32)value) << 8) | (curr & 0xff);
+	} else {
+		wr = value;
+	}
+	iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift));
+}
+
+static int ocores_i2c_of_probe(struct platform_device *pdev,
+				struct ocores_i2c *i2c)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	u32 val;
+	u32 clock_frequency;
+	bool clock_frequency_present;
+
+	if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) {
+		/* no 'reg-shift', check for deprecated 'regstep' */
+		if (!of_property_read_u32(np, "regstep", &val)) {
+			if (!is_power_of_2(val)) {
+				dev_err(&pdev->dev, "invalid regstep %d\n",
+					val);
+				return -EINVAL;
+			}
+			i2c->reg_shift = ilog2(val);
+			dev_warn(&pdev->dev,
+				"regstep property deprecated, use reg-shift\n");
+		}
+	}
+
+	clock_frequency_present = !of_property_read_u32(np, "clock-frequency",
+							&clock_frequency);
+	i2c->bus_clock_khz = 100;
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+
+	if (!IS_ERR(i2c->clk)) {
+		int ret = clk_prepare_enable(i2c->clk);
+
+		if (ret) {
+			dev_err(&pdev->dev,
+				"clk_prepare_enable failed: %d\n", ret);
+			return ret;
+		}
+		i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
+		if (clock_frequency_present)
+			i2c->bus_clock_khz = clock_frequency / 1000;
+	}
+
+	if (i2c->ip_clock_khz == 0) {
+		if (of_property_read_u32(np, "opencores,ip-clock-frequency",
+						&val)) {
+			if (!clock_frequency_present) {
+				dev_err(&pdev->dev,
+					"Missing required parameter 'opencores,ip-clock-frequency'\n");
+				clk_disable_unprepare(i2c->clk);
+				return -ENODEV;
+			}
+			i2c->ip_clock_khz = clock_frequency / 1000;
+			dev_warn(&pdev->dev,
+				 "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n");
+		} else {
+			i2c->ip_clock_khz = val / 1000;
+			if (clock_frequency_present)
+				i2c->bus_clock_khz = clock_frequency / 1000;
+		}
+	}
+
+	of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+				&i2c->reg_io_width);
+
+	match = of_match_node(ocores_i2c_match, pdev->dev.of_node);
+	if (match && (long)match->data == TYPE_GRLIB) {
+		dev_dbg(&pdev->dev, "GRLIB variant of i2c-ocores\n");
+		i2c->setreg = oc_setreg_grlib;
+		i2c->getreg = oc_getreg_grlib;
+	}
+
+	return 0;
+}
+#else
+#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
+#endif
+
+static int ocores_i2c_probe(struct platform_device *pdev)
+{
+	struct ocores_i2c *i2c;
+	struct ocores_i2c_platform_data *pdata;
+	struct resource *res;
+	int irq;
+	int ret;
+	int i;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (pdata) {
+		i2c->reg_shift = pdata->reg_shift;
+		i2c->reg_io_width = pdata->reg_io_width;
+		i2c->ip_clock_khz = pdata->clock_khz;
+		i2c->bus_clock_khz = 100;
+	} else {
+		ret = ocores_i2c_of_probe(pdev, i2c);
+		if (ret)
+			return ret;
+	}
+
+	if (i2c->reg_io_width == 0)
+		i2c->reg_io_width = 1; /* Set to default value */
+
+	if (!i2c->setreg || !i2c->getreg) {
+		bool be = pdata ? pdata->big_endian :
+			of_device_is_big_endian(pdev->dev.of_node);
+
+		switch (i2c->reg_io_width) {
+		case 1:
+			i2c->setreg = oc_setreg_8;
+			i2c->getreg = oc_getreg_8;
+			break;
+
+		case 2:
+			i2c->setreg = be ? oc_setreg_16be : oc_setreg_16;
+			i2c->getreg = be ? oc_getreg_16be : oc_getreg_16;
+			break;
+
+		case 4:
+			i2c->setreg = be ? oc_setreg_32be : oc_setreg_32;
+			i2c->getreg = be ? oc_getreg_32be : oc_getreg_32;
+			break;
+
+		default:
+			dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
+				i2c->reg_io_width);
+			ret = -EINVAL;
+			goto err_clk;
+		}
+	}
+
+	ret = ocores_init(&pdev->dev, i2c);
+	if (ret)
+		goto err_clk;
+
+	init_waitqueue_head(&i2c->wait);
+	ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
+			       pdev->name, i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto err_clk;
+	}
+
+	/* hook up driver to tree */
+	platform_set_drvdata(pdev, i2c);
+	i2c->adap = ocores_adapter;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	/* add i2c adapter to i2c tree */
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret)
+		goto err_clk;
+
+	/* add in known devices to the bus */
+	if (pdata) {
+		for (i = 0; i < pdata->num_devices; i++)
+			i2c_new_device(&i2c->adap, pdata->devices + i);
+	}
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int ocores_i2c_remove(struct platform_device *pdev)
+{
+	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+
+	/* disable i2c logic */
+	oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
+		  & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	/* remove adapter & data */
+	i2c_del_adapter(&i2c->adap);
+
+	if (!IS_ERR(i2c->clk))
+		clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ocores_i2c_suspend(struct device *dev)
+{
+	struct ocores_i2c *i2c = dev_get_drvdata(dev);
+	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+	/* make sure the device is disabled */
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	if (!IS_ERR(i2c->clk))
+		clk_disable_unprepare(i2c->clk);
+	return 0;
+}
+
+static int ocores_i2c_resume(struct device *dev)
+{
+	struct ocores_i2c *i2c = dev_get_drvdata(dev);
+
+	if (!IS_ERR(i2c->clk)) {
+		unsigned long rate;
+		int ret = clk_prepare_enable(i2c->clk);
+
+		if (ret) {
+			dev_err(dev,
+				"clk_prepare_enable failed: %d\n", ret);
+			return ret;
+		}
+		rate = clk_get_rate(i2c->clk) / 1000;
+		if (rate)
+			i2c->ip_clock_khz = rate;
+	}
+	return ocores_init(dev, i2c);
+}
+
+static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume);
+#define OCORES_I2C_PM	(&ocores_i2c_pm)
+#else
+#define OCORES_I2C_PM	NULL
+#endif
+
+static struct platform_driver ocores_i2c_driver = {
+	.probe   = ocores_i2c_probe,
+	.remove  = ocores_i2c_remove,
+	.driver  = {
+		.name = "ocores-i2c",
+		.of_match_table = ocores_i2c_match,
+		.pm = OCORES_I2C_PM,
+	},
+};
+
+module_platform_driver(ocores_i2c_driver);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("OpenCores I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ocores-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.c
new file mode 100644
index 0000000..1d87757
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.c
@@ -0,0 +1,791 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This file contains the shared part of the driver for the i2c adapter in
+ * Cavium Networks' OCTEON processors and ThunderX SOCs.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "i2c-octeon-core.h"
+
+/* interrupt service routine */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
+{
+	struct octeon_i2c *i2c = dev_id;
+
+	i2c->int_disable(i2c);
+	wake_up(&i2c->queue);
+
+	return IRQ_HANDLED;
+}
+
+static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+	return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
+}
+
+/**
+ * octeon_i2c_wait - wait for the IFLG to be set
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
+{
+	long time_left;
+
+	/*
+	 * Some chip revisions don't assert the irq in the interrupt
+	 * controller. So we must poll for the IFLG change.
+	 */
+	if (i2c->broken_irq_mode) {
+		u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+		while (!octeon_i2c_test_iflg(i2c) &&
+		       time_before64(get_jiffies_64(), end))
+			usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+		return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+	}
+
+	i2c->int_enable(i2c);
+	time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
+				       i2c->adap.timeout);
+	i2c->int_disable(i2c);
+
+	if (i2c->broken_irq_check && !time_left &&
+	    octeon_i2c_test_iflg(i2c)) {
+		dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+		i2c->broken_irq_mode = true;
+		return 0;
+	}
+
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
+{
+	return (__raw_readq(i2c->twsi_base + SW_TWSI(i2c)) & SW_TWSI_V) == 0;
+}
+
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+{
+	/* clear ST/TS events, listen for neither */
+	octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
+}
+
+/*
+ * Cleanup low-level state & enable high-level controller.
+ */
+static void octeon_i2c_hlc_enable(struct octeon_i2c *i2c)
+{
+	int try = 0;
+	u64 val;
+
+	if (i2c->hlc_enabled)
+		return;
+	i2c->hlc_enabled = true;
+
+	while (1) {
+		val = octeon_i2c_ctl_read(i2c);
+		if (!(val & (TWSI_CTL_STA | TWSI_CTL_STP)))
+			break;
+
+		/* clear IFLG event */
+		if (val & TWSI_CTL_IFLG)
+			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+		if (try++ > 100) {
+			pr_err("%s: giving up\n", __func__);
+			break;
+		}
+
+		/* spin until any start/stop has finished */
+		udelay(10);
+	}
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB);
+}
+
+static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
+{
+	if (!i2c->hlc_enabled)
+		return;
+
+	i2c->hlc_enabled = false;
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+}
+
+/**
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise -ETIMEDOUT.
+ */
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
+{
+	int time_left;
+
+	/*
+	 * Some cn38xx boards don't assert the irq in the interrupt
+	 * controller. So we must poll for the valid bit change.
+	 */
+	if (i2c->broken_irq_mode) {
+		u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+		while (!octeon_i2c_hlc_test_valid(i2c) &&
+		       time_before64(get_jiffies_64(), end))
+			usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+		return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
+	}
+
+	i2c->hlc_int_enable(i2c);
+	time_left = wait_event_timeout(i2c->queue,
+				       octeon_i2c_hlc_test_valid(i2c),
+				       i2c->adap.timeout);
+	i2c->hlc_int_disable(i2c);
+	if (!time_left)
+		octeon_i2c_hlc_int_clear(i2c);
+
+	if (i2c->broken_irq_check && !time_left &&
+	    octeon_i2c_hlc_test_valid(i2c)) {
+		dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+		i2c->broken_irq_mode = true;
+		return 0;
+	}
+
+	if (!time_left)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
+{
+	u8 stat;
+
+	/*
+	 * This is ugly... in HLC mode the status is not in the status register
+	 * but in the lower 8 bits of SW_TWSI.
+	 */
+	if (i2c->hlc_enabled)
+		stat = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	else
+		stat = octeon_i2c_stat_read(i2c);
+
+	switch (stat) {
+	/* Everything is fine */
+	case STAT_IDLE:
+	case STAT_AD2W_ACK:
+	case STAT_RXADDR_ACK:
+	case STAT_TXADDR_ACK:
+	case STAT_TXDATA_ACK:
+		return 0;
+
+	/* ACK allowed on pre-terminal bytes only */
+	case STAT_RXDATA_ACK:
+		if (!final_read)
+			return 0;
+		return -EIO;
+
+	/* NAK allowed on terminal byte only */
+	case STAT_RXDATA_NAK:
+		if (final_read)
+			return 0;
+		return -EIO;
+
+	/* Arbitration lost */
+	case STAT_LOST_ARB_38:
+	case STAT_LOST_ARB_68:
+	case STAT_LOST_ARB_78:
+	case STAT_LOST_ARB_B0:
+		return -EAGAIN;
+
+	/* Being addressed as slave, should back off & listen */
+	case STAT_SLAVE_60:
+	case STAT_SLAVE_70:
+	case STAT_GENDATA_ACK:
+	case STAT_GENDATA_NAK:
+		return -EOPNOTSUPP;
+
+	/* Core busy as slave */
+	case STAT_SLAVE_80:
+	case STAT_SLAVE_88:
+	case STAT_SLAVE_A0:
+	case STAT_SLAVE_A8:
+	case STAT_SLAVE_LOST:
+	case STAT_SLAVE_NAK:
+	case STAT_SLAVE_ACK:
+		return -EOPNOTSUPP;
+
+	case STAT_TXDATA_NAK:
+		return -EIO;
+	case STAT_TXADDR_NAK:
+	case STAT_RXADDR_NAK:
+	case STAT_AD2W_NAK:
+		return -ENXIO;
+	default:
+		dev_err(i2c->dev, "unhandled state: %d\n", stat);
+		return -EIO;
+	}
+}
+
+static int octeon_i2c_recovery(struct octeon_i2c *i2c)
+{
+	int ret;
+
+	ret = i2c_recover_bus(&i2c->adap);
+	if (ret)
+		/* recover failed, try hardware re-init */
+		ret = octeon_i2c_init_lowlevel(i2c);
+	return ret;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
+{
+	int ret;
+	u8 stat;
+
+	octeon_i2c_hlc_disable(i2c);
+
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
+	ret = octeon_i2c_wait(i2c);
+	if (ret)
+		goto error;
+
+	stat = octeon_i2c_stat_read(i2c);
+	if (stat == STAT_START || stat == STAT_REP_START)
+		/* START successful, bail out */
+		return 0;
+
+error:
+	/* START failed, try to recover */
+	ret = octeon_i2c_recovery(i2c);
+	return (ret) ? ret : -EAGAIN;
+}
+
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
+}
+
+/**
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
+ * @recv_len: flag for length byte
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+			   u8 *data, u16 *rlength, bool recv_len)
+{
+	int i, result, length = *rlength;
+	bool final_read = false;
+
+	octeon_i2c_data_write(i2c, (target << 1) | 1);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
+
+	/* address OK ? */
+	result = octeon_i2c_check_status(i2c, false);
+	if (result)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		/*
+		 * For the last byte to receive TWSI_CTL_AAK must not be set.
+		 *
+		 * A special case is I2C_M_RECV_LEN where we don't know the
+		 * additional length yet. If recv_len is set we assume we're
+		 * not reading the final byte and therefore need to set
+		 * TWSI_CTL_AAK.
+		 */
+		if ((i + 1 == length) && !(recv_len && i == 0))
+			final_read = true;
+
+		/* clear iflg to allow next event */
+		if (final_read)
+			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+		else
+			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
+
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
+
+		data[i] = octeon_i2c_data_read(i2c, &result);
+		if (result)
+			return result;
+		if (recv_len && i == 0) {
+			if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
+				return -EPROTO;
+			length += data[i];
+		}
+
+		result = octeon_i2c_check_status(i2c, final_read);
+		if (result)
+			return result;
+	}
+	*rlength = length;
+	return 0;
+}
+
+/**
+ * octeon_i2c_write - send data to the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
+ *
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+			    const u8 *data, int length)
+{
+	int i, result;
+
+	octeon_i2c_data_write(i2c, target << 1);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		result = octeon_i2c_check_status(i2c, false);
+		if (result)
+			return result;
+
+		octeon_i2c_data_write(i2c, data[i]);
+		octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
+	}
+
+	return 0;
+}
+
+/* high-level-controller pure read of up to 8 bytes */
+static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	int i, j, ret = 0;
+	u64 cmd;
+
+	octeon_i2c_hlc_enable(i2c);
+	octeon_i2c_hlc_int_clear(i2c);
+
+	cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+	/* SIZE */
+	cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+	/* A */
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10;
+	else
+		cmd |= SW_TWSI_OP_7;
+
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		goto err;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+	for (i = 0, j = msgs[0].len - 1; i  < msgs[0].len && i < 4; i++, j--)
+		msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+	if (msgs[0].len > 4) {
+		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
+		for (i = 0; i  < msgs[0].len - 4 && i < 4; i++, j--)
+			msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+	}
+
+err:
+	return ret;
+}
+
+/* high-level-controller pure write of up to 8 bytes */
+static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	int i, j, ret = 0;
+	u64 cmd;
+
+	octeon_i2c_hlc_enable(i2c);
+	octeon_i2c_hlc_int_clear(i2c);
+
+	cmd = SW_TWSI_V | SW_TWSI_SOVR;
+	/* SIZE */
+	cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+	/* A */
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10;
+	else
+		cmd |= SW_TWSI_OP_7;
+
+	for (i = 0, j = msgs[0].len - 1; i  < msgs[0].len && i < 4; i++, j--)
+		cmd |= (u64)msgs[0].buf[j] << (8 * i);
+
+	if (msgs[0].len > 4) {
+		u64 ext = 0;
+
+		for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+			ext |= (u64)msgs[0].buf[j] << (8 * i);
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+	}
+
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		goto err;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+err:
+	return ret;
+}
+
+/* high-level-controller composite write+read, msg0=addr, msg1=data */
+static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	int i, j, ret = 0;
+	u64 cmd;
+
+	octeon_i2c_hlc_enable(i2c);
+
+	cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+	/* SIZE */
+	cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+	/* A */
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10_IA;
+	else
+		cmd |= SW_TWSI_OP_7_IA;
+
+	if (msgs[0].len == 2) {
+		u64 ext = 0;
+
+		cmd |= SW_TWSI_EIA;
+		ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+	} else {
+		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+	}
+
+	octeon_i2c_hlc_int_clear(i2c);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		goto err;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+	for (i = 0, j = msgs[1].len - 1; i  < msgs[1].len && i < 4; i++, j--)
+		msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+	if (msgs[1].len > 4) {
+		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
+		for (i = 0; i  < msgs[1].len - 4 && i < 4; i++, j--)
+			msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+	}
+
+err:
+	return ret;
+}
+
+/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */
+static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	bool set_ext = false;
+	int i, j, ret = 0;
+	u64 cmd, ext = 0;
+
+	octeon_i2c_hlc_enable(i2c);
+
+	cmd = SW_TWSI_V | SW_TWSI_SOVR;
+	/* SIZE */
+	cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+	/* A */
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10_IA;
+	else
+		cmd |= SW_TWSI_OP_7_IA;
+
+	if (msgs[0].len == 2) {
+		cmd |= SW_TWSI_EIA;
+		ext |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+		set_ext = true;
+		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+	} else {
+		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+	}
+
+	for (i = 0, j = msgs[1].len - 1; i  < msgs[1].len && i < 4; i++, j--)
+		cmd |= (u64)msgs[1].buf[j] << (8 * i);
+
+	if (msgs[1].len > 4) {
+		for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+			ext |= (u64)msgs[1].buf[j] << (8 * i);
+		set_ext = true;
+	}
+	if (set_ext)
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+
+	octeon_i2c_hlc_int_clear(i2c);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		goto err;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+err:
+	return ret;
+}
+
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
+ *
+ * Returns the number of messages processed, or a negative errno on failure.
+ */
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+	int i, ret = 0;
+
+	if (num == 1) {
+		if (msgs[0].len > 0 && msgs[0].len <= 8) {
+			if (msgs[0].flags & I2C_M_RD)
+				ret = octeon_i2c_hlc_read(i2c, msgs);
+			else
+				ret = octeon_i2c_hlc_write(i2c, msgs);
+			goto out;
+		}
+	} else if (num == 2) {
+		if ((msgs[0].flags & I2C_M_RD) == 0 &&
+		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+		    msgs[0].len > 0 && msgs[0].len <= 2 &&
+		    msgs[1].len > 0 && msgs[1].len <= 8 &&
+		    msgs[0].addr == msgs[1].addr) {
+			if (msgs[1].flags & I2C_M_RD)
+				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+			else
+				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+			goto out;
+		}
+	}
+
+	for (i = 0; ret == 0 && i < num; i++) {
+		struct i2c_msg *pmsg = &msgs[i];
+
+		/* zero-length messages are not supported */
+		if (!pmsg->len) {
+			ret = -EOPNOTSUPP;
+			break;
+		}
+
+		ret = octeon_i2c_start(i2c);
+		if (ret)
+			return ret;
+
+		if (pmsg->flags & I2C_M_RD)
+			ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+					      &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
+		else
+			ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+					       pmsg->len);
+	}
+	octeon_i2c_stop(i2c);
+out:
+	return (ret != 0) ? ret : num;
+}
+
+/* calculate and set clock divisors */
+void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+{
+	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+		/*
+		 * An mdiv value of less than 2 seems to not work well
+		 * with ds1337 RTCs, so we constrain it to larger values.
+		 */
+		for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+			/*
+			 * For given ndiv and mdiv values check the
+			 * two closest thp values.
+			 */
+			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+			tclk *= (1 << ndiv_idx);
+			thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
+			for (inc = 0; inc <= 1; inc++) {
+				thp_idx = thp_base + inc;
+				if (thp_idx < 5 || thp_idx > 0xff)
+					continue;
+
+				foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+				foscl = foscl / (1 << ndiv_idx);
+				foscl = foscl / (mdiv_idx + 1) / 10;
+				diff = abs(foscl - i2c->twsi_freq);
+				if (diff < delta_hz) {
+					delta_hz = diff;
+					thp = thp_idx;
+					mdiv = mdiv_idx;
+					ndiv = ndiv_idx;
+				}
+			}
+		}
+	}
+	octeon_i2c_reg_write(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+}
+
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+{
+	u8 status = 0;
+	int tries;
+
+	/* reset controller */
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+	for (tries = 10; tries && status != STAT_IDLE; tries--) {
+		udelay(1);
+		status = octeon_i2c_stat_read(i2c);
+		if (status == STAT_IDLE)
+			break;
+	}
+
+	if (status != STAT_IDLE) {
+		dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n",
+			__func__, status);
+		return -EIO;
+	}
+
+	/* toggle twice to force both teardowns */
+	octeon_i2c_hlc_enable(i2c);
+	octeon_i2c_hlc_disable(i2c);
+	return 0;
+}
+
+static int octeon_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+	u64 state;
+
+	state = octeon_i2c_read_int(i2c);
+	return state & TWSI_INT_SCL;
+}
+
+static void octeon_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+	octeon_i2c_write_int(i2c, val ? 0 : TWSI_INT_SCL_OVR);
+}
+
+static int octeon_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+	u64 state;
+
+	state = octeon_i2c_read_int(i2c);
+	return state & TWSI_INT_SDA;
+}
+
+static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+	octeon_i2c_hlc_disable(i2c);
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+	/* wait for software reset to settle */
+	udelay(5);
+
+	/*
+	 * Bring control register to a good state regardless
+	 * of HLC state.
+	 */
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+	octeon_i2c_write_int(i2c, 0);
+}
+
+static void octeon_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+	/*
+	 * Generate STOP to finish the unfinished transaction.
+	 * Can't generate STOP via the TWSI CTL register
+	 * since it could bring the TWSI controller into an inoperable state.
+	 */
+	octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR);
+	udelay(5);
+	octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR);
+	udelay(5);
+	octeon_i2c_write_int(i2c, 0);
+}
+
+struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.get_scl = octeon_i2c_get_scl,
+	.set_scl = octeon_i2c_set_scl,
+	.get_sda = octeon_i2c_get_sda,
+	.prepare_recovery = octeon_i2c_prepare_recovery,
+	.unprepare_recovery = octeon_i2c_unprepare_recovery,
+};
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.h
new file mode 100644
index 0000000..a7ef198
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-core.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+/* Controller command patterns */
+#define SW_TWSI_V		BIT_ULL(63)	/* Valid bit */
+#define SW_TWSI_EIA		BIT_ULL(61)	/* Extended internal address */
+#define SW_TWSI_R		BIT_ULL(56)	/* Result or read bit */
+#define SW_TWSI_SOVR		BIT_ULL(55)	/* Size override */
+#define SW_TWSI_SIZE_SHIFT	52
+#define SW_TWSI_ADDR_SHIFT	40
+#define SW_TWSI_IA_SHIFT	32		/* Internal address */
+
+/* Controller opcode word (bits 60:57) */
+#define SW_TWSI_OP_SHIFT	57
+#define SW_TWSI_OP_7		(0ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_7_IA		(1ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10		(2ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10_IA	(3ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_TWSI_CLK	(4ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_EOP		(6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
+
+/* Controller extended opcode word (bits 34:32) */
+#define SW_TWSI_EOP_SHIFT	32
+#define SW_TWSI_EOP_TWSI_DATA	(SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CTL	(SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CLKCTL	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_STAT	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_RST	(SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE		0x80	/* High level controller enable */
+#define TWSI_CTL_ENAB		0x40	/* Bus enable */
+#define TWSI_CTL_STA		0x20	/* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP		0x10	/* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG		0x08	/* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK		0x04	/* Assert ACK */
+
+/* Status values */
+#define STAT_ERROR		0x00
+#define STAT_START		0x08
+#define STAT_REP_START		0x10
+#define STAT_TXADDR_ACK		0x18
+#define STAT_TXADDR_NAK		0x20
+#define STAT_TXDATA_ACK		0x28
+#define STAT_TXDATA_NAK		0x30
+#define STAT_LOST_ARB_38	0x38
+#define STAT_RXADDR_ACK		0x40
+#define STAT_RXADDR_NAK		0x48
+#define STAT_RXDATA_ACK		0x50
+#define STAT_RXDATA_NAK		0x58
+#define STAT_SLAVE_60		0x60
+#define STAT_LOST_ARB_68	0x68
+#define STAT_SLAVE_70		0x70
+#define STAT_LOST_ARB_78	0x78
+#define STAT_SLAVE_80		0x80
+#define STAT_SLAVE_88		0x88
+#define STAT_GENDATA_ACK	0x90
+#define STAT_GENDATA_NAK	0x98
+#define STAT_SLAVE_A0		0xA0
+#define STAT_SLAVE_A8		0xA8
+#define STAT_LOST_ARB_B0	0xB0
+#define STAT_SLAVE_LOST		0xB8
+#define STAT_SLAVE_NAK		0xC0
+#define STAT_SLAVE_ACK		0xC8
+#define STAT_AD2W_ACK		0xD0
+#define STAT_AD2W_NAK		0xD8
+#define STAT_IDLE		0xF8
+
+/* TWSI_INT values */
+#define TWSI_INT_ST_INT		BIT_ULL(0)
+#define TWSI_INT_TS_INT		BIT_ULL(1)
+#define TWSI_INT_CORE_INT	BIT_ULL(2)
+#define TWSI_INT_ST_EN		BIT_ULL(4)
+#define TWSI_INT_TS_EN		BIT_ULL(5)
+#define TWSI_INT_CORE_EN	BIT_ULL(6)
+#define TWSI_INT_SDA_OVR	BIT_ULL(8)
+#define TWSI_INT_SCL_OVR	BIT_ULL(9)
+#define TWSI_INT_SDA		BIT_ULL(10)
+#define TWSI_INT_SCL		BIT_ULL(11)
+
+#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
+
+/* Register offsets */
+struct octeon_i2c_reg_offset {
+	unsigned int sw_twsi;
+	unsigned int twsi_int;
+	unsigned int sw_twsi_ext;
+};
+
+#define SW_TWSI(x)	(x->roff.sw_twsi)
+#define TWSI_INT(x)	(x->roff.twsi_int)
+#define SW_TWSI_EXT(x)	(x->roff.sw_twsi_ext)
+
+struct octeon_i2c {
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	struct octeon_i2c_reg_offset roff;
+	struct clk *clk;
+	int irq;
+	int hlc_irq;		/* For cn7890 only */
+	u32 twsi_freq;
+	int sys_freq;
+	void __iomem *twsi_base;
+	struct device *dev;
+	bool hlc_enabled;
+	bool broken_irq_mode;
+	bool broken_irq_check;
+	void (*int_enable)(struct octeon_i2c *);
+	void (*int_disable)(struct octeon_i2c *);
+	void (*hlc_int_enable)(struct octeon_i2c *);
+	void (*hlc_int_disable)(struct octeon_i2c *);
+	atomic_t int_enable_cnt;
+	atomic_t hlc_int_enable_cnt;
+	struct i2c_smbus_alert_setup alert_data;
+	struct i2c_client *ara;
+};
+
+static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
+{
+	__raw_writeq(val, addr);
+	__raw_readq(addr);	/* wait for write to land */
+}
+
+/**
+ * octeon_i2c_reg_write - write an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ * @data: Value to be written
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
+{
+	int tries = 1000;
+	u64 tmp;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
+	do {
+		tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+		if (--tries < 0)
+			return;
+	} while ((tmp & SW_TWSI_V) != 0);
+}
+
+#define octeon_i2c_ctl_write(i2c, val)					\
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
+#define octeon_i2c_data_write(i2c, val)					\
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+
+/**
+ * octeon_i2c_reg_read - read lower bits of an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
+				      int *error)
+{
+	int tries = 1000;
+	u64 tmp;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
+	do {
+		tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+		if (--tries < 0) {
+			/* signal that the returned data is invalid */
+			if (error)
+				*error = -EIO;
+			return 0;
+		}
+	} while ((tmp & SW_TWSI_V) != 0);
+
+	return tmp & 0xFF;
+}
+
+#define octeon_i2c_ctl_read(i2c)					\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL, NULL)
+#define octeon_i2c_data_read(i2c, error)				\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA, error)
+#define octeon_i2c_stat_read(i2c)					\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)
+
+/**
+ * octeon_i2c_read_int - read the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns the value of the register.
+ */
+static inline u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+{
+	return __raw_readq(i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ * @data: Value to be written
+ */
+static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+	octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/* Prototypes */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c);
+void octeon_i2c_set_clock(struct octeon_i2c *i2c);
+extern struct i2c_bus_recovery_info octeon_i2c_recovery_info;
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-platdrv.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-platdrv.c
new file mode 100644
index 0000000..64bda83
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-octeon"
+
+/**
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	/* clear TS/ST/IFLG events */
+	octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+	atomic_inc_return(&i2c->int_enable_cnt);
+	enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+{
+	int count;
+
+	/*
+	 * The interrupt can be disabled in two places, but we only
+	 * want to make the disable_irq_nosync() call once, so keep
+	 * track with the atomic variable.
+	 */
+	count = atomic_dec_if_positive(cnt);
+	if (count >= 0)
+		disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+	__octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+	atomic_inc_return(&i2c->hlc_int_enable_cnt);
+	enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+	__octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+}
+
+/* HLC interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+	struct octeon_i2c *i2c = dev_id;
+
+	i2c->hlc_int_disable(i2c);
+	wake_up(&i2c->queue);
+
+	return IRQ_HANDLED;
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = octeon_i2c_functionality,
+};
+
+static const struct i2c_adapter octeon_i2c_ops = {
+	.owner = THIS_MODULE,
+	.name = "OCTEON adapter",
+	.algo = &octeon_i2c_algo,
+};
+
+static int octeon_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int irq, result = 0, hlc_irq = 0;
+	struct resource *res_mem;
+	struct octeon_i2c *i2c;
+	bool cn78xx_style;
+
+	cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+	if (cn78xx_style) {
+		hlc_irq = platform_get_irq(pdev, 0);
+		if (hlc_irq < 0)
+			return hlc_irq;
+
+		irq = platform_get_irq(pdev, 2);
+		if (irq < 0)
+			return irq;
+	} else {
+		/* All adaptors have an irq.  */
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
+	}
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c) {
+		result = -ENOMEM;
+		goto out;
+	}
+	i2c->dev = &pdev->dev;
+
+	i2c->roff.sw_twsi = 0x00;
+	i2c->roff.twsi_int = 0x10;
+	i2c->roff.sw_twsi_ext = 0x18;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+	if (IS_ERR(i2c->twsi_base)) {
+		result = PTR_ERR(i2c->twsi_base);
+		goto out;
+	}
+
+	/*
+	 * "clock-rate" is a legacy binding, the official binding is
+	 * "clock-frequency".  Try the official one first and then
+	 * fall back if it doesn't exist.
+	 */
+	if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+	    of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
+		dev_err(i2c->dev,
+			"no I2C 'clock-rate' or 'clock-frequency' property\n");
+		result = -ENXIO;
+		goto out;
+	}
+
+	i2c->sys_freq = octeon_get_io_clock_rate();
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->irq = irq;
+
+	if (cn78xx_style) {
+		i2c->hlc_irq = hlc_irq;
+
+		i2c->int_enable = octeon_i2c_int_enable78;
+		i2c->int_disable = octeon_i2c_int_disable78;
+		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
+		i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
+
+		irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+		irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+		result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+					  octeon_i2c_hlc_isr78, 0,
+					  DRV_NAME, i2c);
+		if (result < 0) {
+			dev_err(i2c->dev, "failed to attach interrupt\n");
+			goto out;
+		}
+	} else {
+		i2c->int_enable = octeon_i2c_int_enable;
+		i2c->int_disable = octeon_i2c_int_disable;
+		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
+		i2c->hlc_int_disable = octeon_i2c_int_disable;
+	}
+
+	result = devm_request_irq(&pdev->dev, i2c->irq,
+				  octeon_i2c_isr, 0, DRV_NAME, i2c);
+	if (result < 0) {
+		dev_err(i2c->dev, "failed to attach interrupt\n");
+		goto out;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+		i2c->broken_irq_check = true;
+
+	result = octeon_i2c_init_lowlevel(i2c);
+	if (result) {
+		dev_err(i2c->dev, "init low level failed\n");
+		goto  out;
+	}
+
+	octeon_i2c_set_clock(i2c);
+
+	i2c->adap = octeon_i2c_ops;
+	i2c->adap.timeout = msecs_to_jiffies(2);
+	i2c->adap.retries = 5;
+	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = node;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	result = i2c_add_adapter(&i2c->adap);
+	if (result < 0)
+		goto out;
+	dev_info(i2c->dev, "probed\n");
+	return 0;
+
+out:
+	return result;
+};
+
+static int octeon_i2c_remove(struct platform_device *pdev)
+{
+	struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+};
+
+static const struct of_device_id octeon_i2c_match[] = {
+	{ .compatible = "cavium,octeon-3860-twsi", },
+	{ .compatible = "cavium,octeon-7890-twsi", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+
+static struct platform_driver octeon_i2c_driver = {
+	.probe		= octeon_i2c_probe,
+	.remove		= octeon_i2c_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = octeon_i2c_match,
+	},
+};
+
+module_platform_driver(octeon_i2c_driver);
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-omap.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-omap.c
new file mode 100644
index 0000000..a03564f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-omap.c
@@ -0,0 +1,1575 @@
+/*
+ * TI OMAP I2C master mode driver
+ *
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2007 Texas Instruments.
+ *
+ * Originally written by MontaVista Software, Inc.
+ * Additional contributions by:
+ *	Tony Lindgren <tony@atomide.com>
+ *	Imre Deak <imre.deak@nokia.com>
+ *	Juha Yrjölä <juha.yrjola@solidboot.com>
+ *	Syed Khasim <x0khasim@ti.com>
+ *	Nishant Menon <nm@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/i2c-omap.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+/* I2C controller revisions */
+#define OMAP_I2C_OMAP1_REV_2		0x20
+
+/* I2C controller revisions present on specific hardware */
+#define OMAP_I2C_REV_ON_2430		0x00000036
+#define OMAP_I2C_REV_ON_3430_3530	0x0000003C
+#define OMAP_I2C_REV_ON_3630		0x00000040
+#define OMAP_I2C_REV_ON_4430_PLUS	0x50400002
+
+/* timeout waiting for the controller to respond */
+#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+/* timeout for pm runtime autosuspend */
+#define OMAP_I2C_PM_TIMEOUT		1000	/* ms */
+
+/* timeout for making decision on bus free status */
+#define OMAP_I2C_BUS_FREE_TIMEOUT (msecs_to_jiffies(10))
+
+/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
+enum {
+	OMAP_I2C_REV_REG = 0,
+	OMAP_I2C_IE_REG,
+	OMAP_I2C_STAT_REG,
+	OMAP_I2C_IV_REG,
+	OMAP_I2C_WE_REG,
+	OMAP_I2C_SYSS_REG,
+	OMAP_I2C_BUF_REG,
+	OMAP_I2C_CNT_REG,
+	OMAP_I2C_DATA_REG,
+	OMAP_I2C_SYSC_REG,
+	OMAP_I2C_CON_REG,
+	OMAP_I2C_OA_REG,
+	OMAP_I2C_SA_REG,
+	OMAP_I2C_PSC_REG,
+	OMAP_I2C_SCLL_REG,
+	OMAP_I2C_SCLH_REG,
+	OMAP_I2C_SYSTEST_REG,
+	OMAP_I2C_BUFSTAT_REG,
+	/* only on OMAP4430 */
+	OMAP_I2C_IP_V2_REVNB_LO,
+	OMAP_I2C_IP_V2_REVNB_HI,
+	OMAP_I2C_IP_V2_IRQSTATUS_RAW,
+	OMAP_I2C_IP_V2_IRQENABLE_SET,
+	OMAP_I2C_IP_V2_IRQENABLE_CLR,
+};
+
+/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
+#define OMAP_I2C_IE_XDR		(1 << 14)	/* TX Buffer drain int enable */
+#define OMAP_I2C_IE_RDR		(1 << 13)	/* RX Buffer drain int enable */
+#define OMAP_I2C_IE_XRDY	(1 << 4)	/* TX data ready int enable */
+#define OMAP_I2C_IE_RRDY	(1 << 3)	/* RX data ready int enable */
+#define OMAP_I2C_IE_ARDY	(1 << 2)	/* Access ready int enable */
+#define OMAP_I2C_IE_NACK	(1 << 1)	/* No ack interrupt enable */
+#define OMAP_I2C_IE_AL		(1 << 0)	/* Arbitration lost int ena */
+
+/* I2C Status Register (OMAP_I2C_STAT): */
+#define OMAP_I2C_STAT_XDR	(1 << 14)	/* TX Buffer draining */
+#define OMAP_I2C_STAT_RDR	(1 << 13)	/* RX Buffer draining */
+#define OMAP_I2C_STAT_BB	(1 << 12)	/* Bus busy */
+#define OMAP_I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
+#define OMAP_I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
+#define OMAP_I2C_STAT_AAS	(1 << 9)	/* Address as slave */
+#define OMAP_I2C_STAT_BF	(1 << 8)	/* Bus Free */
+#define OMAP_I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
+#define OMAP_I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
+#define OMAP_I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
+#define OMAP_I2C_STAT_NACK	(1 << 1)	/* No ack interrupt enable */
+#define OMAP_I2C_STAT_AL	(1 << 0)	/* Arbitration lost int ena */
+
+/* I2C WE wakeup enable register */
+#define OMAP_I2C_WE_XDR_WE	(1 << 14)	/* TX drain wakup */
+#define OMAP_I2C_WE_RDR_WE	(1 << 13)	/* RX drain wakeup */
+#define OMAP_I2C_WE_AAS_WE	(1 << 9)	/* Address as slave wakeup*/
+#define OMAP_I2C_WE_BF_WE	(1 << 8)	/* Bus free wakeup */
+#define OMAP_I2C_WE_STC_WE	(1 << 6)	/* Start condition wakeup */
+#define OMAP_I2C_WE_GC_WE	(1 << 5)	/* General call wakeup */
+#define OMAP_I2C_WE_DRDY_WE	(1 << 3)	/* TX/RX data ready wakeup */
+#define OMAP_I2C_WE_ARDY_WE	(1 << 2)	/* Reg access ready wakeup */
+#define OMAP_I2C_WE_NACK_WE	(1 << 1)	/* No acknowledgment wakeup */
+#define OMAP_I2C_WE_AL_WE	(1 << 0)	/* Arbitration lost wakeup */
+
+#define OMAP_I2C_WE_ALL		(OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
+				OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
+				OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
+				OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
+				OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
+
+/* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
+#define OMAP_I2C_BUF_RDMA_EN	(1 << 15)	/* RX DMA channel enable */
+#define OMAP_I2C_BUF_RXFIF_CLR	(1 << 14)	/* RX FIFO Clear */
+#define OMAP_I2C_BUF_XDMA_EN	(1 << 7)	/* TX DMA channel enable */
+#define OMAP_I2C_BUF_TXFIF_CLR	(1 << 6)	/* TX FIFO Clear */
+
+/* I2C Configuration Register (OMAP_I2C_CON): */
+#define OMAP_I2C_CON_EN		(1 << 15)	/* I2C module enable */
+#define OMAP_I2C_CON_BE		(1 << 14)	/* Big endian mode */
+#define OMAP_I2C_CON_OPMODE_HS	(1 << 12)	/* High Speed support */
+#define OMAP_I2C_CON_STB	(1 << 11)	/* Start byte mode (master) */
+#define OMAP_I2C_CON_MST	(1 << 10)	/* Master/slave mode */
+#define OMAP_I2C_CON_TRX	(1 << 9)	/* TX/RX mode (master only) */
+#define OMAP_I2C_CON_XA		(1 << 8)	/* Expand address */
+#define OMAP_I2C_CON_RM		(1 << 2)	/* Repeat mode (master only) */
+#define OMAP_I2C_CON_STP	(1 << 1)	/* Stop cond (master only) */
+#define OMAP_I2C_CON_STT	(1 << 0)	/* Start condition (master) */
+
+/* I2C SCL time value when Master */
+#define OMAP_I2C_SCLL_HSSCLL	8
+#define OMAP_I2C_SCLH_HSSCLH	8
+
+/* I2C System Test Register (OMAP_I2C_SYSTEST): */
+#define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
+#define OMAP_I2C_SYSTEST_FREE		(1 << 14)	/* Free running mode */
+#define OMAP_I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_SHIFT	(12)		/* Test mode select */
+/* Functional mode */
+#define OMAP_I2C_SYSTEST_SCL_I_FUNC	(1 << 8)	/* SCL line input value */
+#define OMAP_I2C_SYSTEST_SCL_O_FUNC	(1 << 7)	/* SCL line output value */
+#define OMAP_I2C_SYSTEST_SDA_I_FUNC	(1 << 6)	/* SDA line input value */
+#define OMAP_I2C_SYSTEST_SDA_O_FUNC	(1 << 5)	/* SDA line output value */
+/* SDA/SCL IO mode */
+#define OMAP_I2C_SYSTEST_SCL_I		(1 << 3)	/* SCL line sense in */
+#define OMAP_I2C_SYSTEST_SCL_O		(1 << 2)	/* SCL line drive out */
+#define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
+#define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
+
+/* OCP_SYSSTATUS bit definitions */
+#define SYSS_RESETDONE_MASK		(1 << 0)
+
+/* OCP_SYSCONFIG bit definitions */
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
+#define SYSC_SIDLEMODE_MASK		(0x3 << 3)
+#define SYSC_ENAWAKEUP_MASK		(1 << 2)
+#define SYSC_SOFTRESET_MASK		(1 << 1)
+#define SYSC_AUTOIDLE_MASK		(1 << 0)
+
+#define SYSC_IDLEMODE_SMART		0x2
+#define SYSC_CLOCKACTIVITY_FCLK		0x2
+
+/* Errata definitions */
+#define I2C_OMAP_ERRATA_I207		(1 << 0)
+#define I2C_OMAP_ERRATA_I462		(1 << 1)
+
+#define OMAP_I2C_IP_V2_INTERRUPTS_MASK	0x6FFF
+
+struct omap_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;		/* virtual */
+	int			irq;
+	int			reg_shift;      /* bit shift for I2C register addresses */
+	struct completion	cmd_complete;
+	struct resource		*ioarea;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
+	u32			speed;		/* Speed of bus in kHz */
+	u32			flags;
+	u16			scheme;
+	u16			cmd_err;
+	u8			*buf;
+	u8			*regs;
+	size_t			buf_len;
+	struct i2c_adapter	adapter;
+	u8			threshold;
+	u8			fifo_size;	/* use as flag and value
+						 * fifo_size==0 implies no fifo
+						 * if set, should be trsh+1
+						 */
+	u32			rev;
+	unsigned		b_hw:1;		/* bad h/w fixes */
+	unsigned		bb_valid:1;	/* true when BB-bit reflects
+						 * the I2C bus state
+						 */
+	unsigned		receiver:1;	/* true when we're in receiver mode */
+	u16			iestate;	/* Saved interrupt register */
+	u16			pscstate;
+	u16			scllstate;
+	u16			sclhstate;
+	u16			syscstate;
+	u16			westate;
+	u16			errata;
+};
+
+static const u8 reg_map_ip_v1[] = {
+	[OMAP_I2C_REV_REG] = 0x00,
+	[OMAP_I2C_IE_REG] = 0x01,
+	[OMAP_I2C_STAT_REG] = 0x02,
+	[OMAP_I2C_IV_REG] = 0x03,
+	[OMAP_I2C_WE_REG] = 0x03,
+	[OMAP_I2C_SYSS_REG] = 0x04,
+	[OMAP_I2C_BUF_REG] = 0x05,
+	[OMAP_I2C_CNT_REG] = 0x06,
+	[OMAP_I2C_DATA_REG] = 0x07,
+	[OMAP_I2C_SYSC_REG] = 0x08,
+	[OMAP_I2C_CON_REG] = 0x09,
+	[OMAP_I2C_OA_REG] = 0x0a,
+	[OMAP_I2C_SA_REG] = 0x0b,
+	[OMAP_I2C_PSC_REG] = 0x0c,
+	[OMAP_I2C_SCLL_REG] = 0x0d,
+	[OMAP_I2C_SCLH_REG] = 0x0e,
+	[OMAP_I2C_SYSTEST_REG] = 0x0f,
+	[OMAP_I2C_BUFSTAT_REG] = 0x10,
+};
+
+static const u8 reg_map_ip_v2[] = {
+	[OMAP_I2C_REV_REG] = 0x04,
+	[OMAP_I2C_IE_REG] = 0x2c,
+	[OMAP_I2C_STAT_REG] = 0x28,
+	[OMAP_I2C_IV_REG] = 0x34,
+	[OMAP_I2C_WE_REG] = 0x34,
+	[OMAP_I2C_SYSS_REG] = 0x90,
+	[OMAP_I2C_BUF_REG] = 0x94,
+	[OMAP_I2C_CNT_REG] = 0x98,
+	[OMAP_I2C_DATA_REG] = 0x9c,
+	[OMAP_I2C_SYSC_REG] = 0x10,
+	[OMAP_I2C_CON_REG] = 0xa4,
+	[OMAP_I2C_OA_REG] = 0xa8,
+	[OMAP_I2C_SA_REG] = 0xac,
+	[OMAP_I2C_PSC_REG] = 0xb0,
+	[OMAP_I2C_SCLL_REG] = 0xb4,
+	[OMAP_I2C_SCLH_REG] = 0xb8,
+	[OMAP_I2C_SYSTEST_REG] = 0xbC,
+	[OMAP_I2C_BUFSTAT_REG] = 0xc0,
+	[OMAP_I2C_IP_V2_REVNB_LO] = 0x00,
+	[OMAP_I2C_IP_V2_REVNB_HI] = 0x04,
+	[OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24,
+	[OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c,
+	[OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30,
+};
+
+static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap,
+				      int reg, u16 val)
+{
+	writew_relaxed(val, omap->base +
+			(omap->regs[reg] << omap->reg_shift));
+}
+
+static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg)
+{
+	return readw_relaxed(omap->base +
+				(omap->regs[reg] << omap->reg_shift));
+}
+
+static void __omap_i2c_init(struct omap_i2c_dev *omap)
+{
+
+	omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+
+	/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
+	omap_i2c_write_reg(omap, OMAP_I2C_PSC_REG, omap->pscstate);
+
+	/* SCL low and high time values */
+	omap_i2c_write_reg(omap, OMAP_I2C_SCLL_REG, omap->scllstate);
+	omap_i2c_write_reg(omap, OMAP_I2C_SCLH_REG, omap->sclhstate);
+	if (omap->rev >= OMAP_I2C_REV_ON_3430_3530)
+		omap_i2c_write_reg(omap, OMAP_I2C_WE_REG, omap->westate);
+
+	/* Take the I2C module out of reset: */
+	omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+
+	/*
+	 * NOTE: right after setting CON_EN, STAT_BB could be 0 while the
+	 * bus is busy. It will be changed to 1 on the next IP FCLK clock.
+	 * udelay(1) will be enough to fix that.
+	 */
+
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (omap->iestate)
+		omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate);
+}
+
+static int omap_i2c_reset(struct omap_i2c_dev *omap)
+{
+	unsigned long timeout;
+	u16 sysc;
+
+	if (omap->rev >= OMAP_I2C_OMAP1_REV_2) {
+		sysc = omap_i2c_read_reg(omap, OMAP_I2C_SYSC_REG);
+
+		/* Disable I2C controller before soft reset */
+		omap_i2c_write_reg(omap, OMAP_I2C_CON_REG,
+			omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) &
+				~(OMAP_I2C_CON_EN));
+
+		omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
+		/* For some reason we need to set the EN bit before the
+		 * reset done bit gets set. */
+		timeout = jiffies + OMAP_I2C_TIMEOUT;
+		omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+		while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) &
+			 SYSS_RESETDONE_MASK)) {
+			if (time_after(jiffies, timeout)) {
+				dev_warn(omap->dev, "timeout waiting "
+						"for controller reset\n");
+				return -ETIMEDOUT;
+			}
+			msleep(1);
+		}
+
+		/* SYSC register is cleared by the reset; rewrite it */
+		omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, sysc);
+
+		if (omap->rev > OMAP_I2C_REV_ON_3430_3530) {
+			/* Schedule I2C-bus monitoring on the next transfer */
+			omap->bb_valid = 0;
+		}
+	}
+
+	return 0;
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *omap)
+{
+	u16 psc = 0, scll = 0, sclh = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+	struct clk *fclk;
+	int error;
+
+	if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
+		/*
+		 * Enabling all wakup sources to stop I2C freezing on
+		 * WFI instruction.
+		 * REVISIT: Some wkup sources might not be needed.
+		 */
+		omap->westate = OMAP_I2C_WE_ALL;
+	}
+
+	if (omap->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
+		/*
+		 * The I2C functional clock is the armxor_ck, so there's
+		 * no need to get "armxor_ck" separately.  Now, if OMAP2420
+		 * always returns 12MHz for the functional clock, we can
+		 * do this bit unconditionally.
+		 */
+		fclk = clk_get(omap->dev, "fck");
+		if (IS_ERR(fclk)) {
+			error = PTR_ERR(fclk);
+			dev_err(omap->dev, "could not get fck: %i\n", error);
+
+			return error;
+		}
+
+		fclk_rate = clk_get_rate(fclk);
+		clk_put(fclk);
+
+		/* TRM for 5912 says the I2C clock must be prescaled to be
+		 * between 7 - 12 MHz. The XOR input clock is typically
+		 * 12, 13 or 19.2 MHz. So we should have code that produces:
+		 *
+		 * XOR MHz	Divider		Prescaler
+		 * 12		1		0
+		 * 13		2		1
+		 * 19.2		2		1
+		 */
+		if (fclk_rate > 12000000)
+			psc = fclk_rate / 12000000;
+	}
+
+	if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
+
+		/*
+		 * HSI2C controller internal clk rate should be 19.2 Mhz for
+		 * HS and for all modes on 2430. On 34xx we can use lower rate
+		 * to get longer filter period for better noise suppression.
+		 * The filter is iclk (fclk for HS) period.
+		 */
+		if (omap->speed > 400 ||
+			       omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
+			internal_clk = 19200;
+		else if (omap->speed > 100)
+			internal_clk = 9600;
+		else
+			internal_clk = 4000;
+		fclk = clk_get(omap->dev, "fck");
+		if (IS_ERR(fclk)) {
+			error = PTR_ERR(fclk);
+			dev_err(omap->dev, "could not get fck: %i\n", error);
+
+			return error;
+		}
+		fclk_rate = clk_get_rate(fclk) / 1000;
+		clk_put(fclk);
+
+		/* Compute prescaler divisor */
+		psc = fclk_rate / internal_clk;
+		psc = psc - 1;
+
+		/* If configured for High Speed */
+		if (omap->speed > 400) {
+			unsigned long scl;
+
+			/* For first phase of HS mode */
+			scl = internal_clk / 400;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
+
+			/* For second phase of HS mode */
+			scl = fclk_rate / omap->speed;
+			hsscll = scl - (scl / 3) - 7;
+			hssclh = (scl / 3) - 5;
+		} else if (omap->speed > 100) {
+			unsigned long scl;
+
+			/* Fast mode */
+			scl = internal_clk / omap->speed;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
+		} else {
+			/* Standard mode */
+			fsscll = internal_clk / (omap->speed * 2) - 7;
+			fssclh = internal_clk / (omap->speed * 2) - 5;
+		}
+		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
+		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
+	} else {
+		/* Program desired operating rate */
+		fclk_rate /= (psc + 1) * 1000;
+		if (psc > 2)
+			psc = 2;
+		scll = fclk_rate / (omap->speed * 2) - 7 + psc;
+		sclh = fclk_rate / (omap->speed * 2) - 7 + psc;
+	}
+
+	omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+			OMAP_I2C_IE_AL)  | ((omap->fifo_size) ?
+				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
+
+	omap->pscstate = psc;
+	omap->scllstate = scll;
+	omap->sclhstate = sclh;
+
+	if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) {
+		/* Not implemented */
+		omap->bb_valid = 1;
+	}
+
+	__omap_i2c_init(omap);
+
+	return 0;
+}
+
+/*
+ * Try bus recovery, but only if SDA is actually low.
+ */
+static int omap_i2c_recover_bus(struct omap_i2c_dev *omap)
+{
+	u16 systest;
+
+	systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG);
+	if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) &&
+	    (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC))
+		return 0; /* bus seems to already be fine */
+	if (!(systest & OMAP_I2C_SYSTEST_SCL_I_FUNC))
+		return -EBUSY; /* recovery would not fix SCL */
+	return i2c_recover_bus(&omap->adapter);
+}
+
+/*
+ * Waiting on Bus Busy
+ */
+static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + OMAP_I2C_TIMEOUT;
+	while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
+		if (time_after(jiffies, timeout))
+			return omap_i2c_recover_bus(omap);
+		msleep(1);
+	}
+
+	return 0;
+}
+
+/*
+ * Wait while BB-bit doesn't reflect the I2C bus state
+ *
+ * In a multimaster environment, after IP software reset, BB-bit value doesn't
+ * correspond to the current bus state. It may happen what BB-bit will be 0,
+ * while the bus is busy due to another I2C master activity.
+ * Here are BB-bit values after reset:
+ *     SDA   SCL   BB   NOTES
+ *       0     0    0   1, 2
+ *       1     0    0   1, 2
+ *       0     1    1
+ *       1     1    0   3
+ * Later, if IP detect SDA=0 and SCL=1 (ACK) or SDA 1->0 while SCL=1 (START)
+ * combinations on the bus, it set BB-bit to 1.
+ * If IP detect SDA 0->1 while SCL=1 (STOP) combination on the bus,
+ * it set BB-bit to 0 and BF to 1.
+ * BB and BF bits correctly tracks the bus state while IP is suspended
+ * BB bit became valid on the next FCLK clock after CON_EN bit set
+ *
+ * NOTES:
+ * 1. Any transfer started when BB=0 and bus is busy wouldn't be
+ *    completed by IP and results in controller timeout.
+ * 2. Any transfer started when BB=0 and SCL=0 results in IP
+ *    starting to drive SDA low. In that case IP corrupt data
+ *    on the bus.
+ * 3. Any transfer started in the middle of another master's transfer
+ *    results in unpredictable results and data corruption
+ */
+static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap)
+{
+	unsigned long bus_free_timeout = 0;
+	unsigned long timeout;
+	int bus_free = 0;
+	u16 stat, systest;
+
+	if (omap->bb_valid)
+		return 0;
+
+	timeout = jiffies + OMAP_I2C_TIMEOUT;
+	while (1) {
+		stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+		/*
+		 * We will see BB or BF event in a case IP had detected any
+		 * activity on the I2C bus. Now IP correctly tracks the bus
+		 * state. BB-bit value is valid.
+		 */
+		if (stat & (OMAP_I2C_STAT_BB | OMAP_I2C_STAT_BF))
+			break;
+
+		/*
+		 * Otherwise, we must look signals on the bus to make
+		 * the right decision.
+		 */
+		systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG);
+		if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) &&
+		    (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) {
+			if (!bus_free) {
+				bus_free_timeout = jiffies +
+					OMAP_I2C_BUS_FREE_TIMEOUT;
+				bus_free = 1;
+			}
+
+			/*
+			 * SDA and SCL lines was high for 10 ms without bus
+			 * activity detected. The bus is free. Consider
+			 * BB-bit value is valid.
+			 */
+			if (time_after(jiffies, bus_free_timeout))
+				break;
+		} else {
+			bus_free = 0;
+		}
+
+		if (time_after(jiffies, timeout)) {
+			/*
+			 * SDA or SCL were low for the entire timeout without
+			 * any activity detected. Most likely, a slave is
+			 * locking up the bus with no master driving the clock.
+			 */
+			dev_warn(omap->dev, "timeout waiting for bus ready\n");
+			return omap_i2c_recover_bus(omap);
+		}
+
+		msleep(1);
+	}
+
+	omap->bb_valid = 1;
+	return 0;
+}
+
+static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx)
+{
+	u16		buf;
+
+	if (omap->flags & OMAP_I2C_FLAG_NO_FIFO)
+		return;
+
+	/*
+	 * Set up notification threshold based on message size. We're doing
+	 * this to try and avoid draining feature as much as possible. Whenever
+	 * we have big messages to transfer (bigger than our total fifo size)
+	 * then we might use draining feature to transfer the remaining bytes.
+	 */
+
+	omap->threshold = clamp(size, (u8) 1, omap->fifo_size);
+
+	buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
+
+	if (is_rx) {
+		/* Clear RX Threshold */
+		buf &= ~(0x3f << 8);
+		buf |= ((omap->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR;
+	} else {
+		/* Clear TX Threshold */
+		buf &= ~0x3f;
+		buf |= (omap->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR;
+	}
+
+	omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, buf);
+
+	if (omap->rev < OMAP_I2C_REV_ON_3630)
+		omap->b_hw = 1; /* Enable hardware fixes */
+
+	/* calculate wakeup latency constraint for MPU */
+	if (omap->set_mpu_wkup_lat != NULL)
+		omap->latency = (1000000 * omap->threshold) /
+			(1000 * omap->speed / 8);
+}
+
+/*
+ * Low level master read/write transaction.
+ */
+static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
+			     struct i2c_msg *msg, int stop)
+{
+	struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
+	unsigned long timeout;
+	u16 w;
+
+	dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
+		msg->addr, msg->len, msg->flags, stop);
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	omap->receiver = !!(msg->flags & I2C_M_RD);
+	omap_i2c_resize_fifo(omap, msg->len, omap->receiver);
+
+	omap_i2c_write_reg(omap, OMAP_I2C_SA_REG, msg->addr);
+
+	/* REVISIT: Could the STB bit of I2C_CON be used with probing? */
+	omap->buf = msg->buf;
+	omap->buf_len = msg->len;
+
+	/* make sure writes to omap->buf_len are ordered */
+	barrier();
+
+	omap_i2c_write_reg(omap, OMAP_I2C_CNT_REG, omap->buf_len);
+
+	/* Clear the FIFO Buffers */
+	w = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
+	w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
+	omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w);
+
+	reinit_completion(&omap->cmd_complete);
+	omap->cmd_err = 0;
+
+	w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
+
+	/* High speed configuration */
+	if (omap->speed > 400)
+		w |= OMAP_I2C_CON_OPMODE_HS;
+
+	if (msg->flags & I2C_M_STOP)
+		stop = 1;
+	if (msg->flags & I2C_M_TEN)
+		w |= OMAP_I2C_CON_XA;
+	if (!(msg->flags & I2C_M_RD))
+		w |= OMAP_I2C_CON_TRX;
+
+	if (!omap->b_hw && stop)
+		w |= OMAP_I2C_CON_STP;
+	/*
+	 * NOTE: STAT_BB bit could became 1 here if another master occupy
+	 * the bus. IP successfully complete transfer when the bus will be
+	 * free again (BB reset to 0).
+	 */
+	omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
+
+	/*
+	 * Don't write stt and stp together on some hardware.
+	 */
+	if (omap->b_hw && stop) {
+		unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
+		u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
+		while (con & OMAP_I2C_CON_STT) {
+			con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
+
+			/* Let the user know if i2c is in a bad state */
+			if (time_after(jiffies, delay)) {
+				dev_err(omap->dev, "controller timed out "
+				"waiting for start condition to finish\n");
+				return -ETIMEDOUT;
+			}
+			cpu_relax();
+		}
+
+		w |= OMAP_I2C_CON_STP;
+		w &= ~OMAP_I2C_CON_STT;
+		omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
+	}
+
+	/*
+	 * REVISIT: We should abort the transfer on signals, but the bus goes
+	 * into arbitration and we're currently unable to recover from it.
+	 */
+	timeout = wait_for_completion_timeout(&omap->cmd_complete,
+						OMAP_I2C_TIMEOUT);
+	if (timeout == 0) {
+		dev_err(omap->dev, "controller timed out\n");
+		omap_i2c_reset(omap);
+		__omap_i2c_init(omap);
+		return -ETIMEDOUT;
+	}
+
+	if (likely(!omap->cmd_err))
+		return 0;
+
+	/* We have an error */
+	if (omap->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) {
+		omap_i2c_reset(omap);
+		__omap_i2c_init(omap);
+		return -EIO;
+	}
+
+	if (omap->cmd_err & OMAP_I2C_STAT_AL)
+		return -EAGAIN;
+
+	if (omap->cmd_err & OMAP_I2C_STAT_NACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return 0;
+
+		w = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
+		w |= OMAP_I2C_CON_STP;
+		omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
+		return -EREMOTEIO;
+	}
+	return -EIO;
+}
+
+
+/*
+ * Prepare controller for a transaction and call omap_i2c_xfer_msg
+ * to do the work during IRQ processing.
+ */
+static int
+omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
+	int i;
+	int r;
+
+	r = pm_runtime_get_sync(omap->dev);
+	if (r < 0)
+		goto out;
+
+	r = omap_i2c_wait_for_bb_valid(omap);
+	if (r < 0)
+		goto out;
+
+	r = omap_i2c_wait_for_bb(omap);
+	if (r < 0)
+		goto out;
+
+	if (omap->set_mpu_wkup_lat != NULL)
+		omap->set_mpu_wkup_lat(omap->dev, omap->latency);
+
+	for (i = 0; i < num; i++) {
+		r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+		if (r != 0)
+			break;
+	}
+
+	if (r == 0)
+		r = num;
+
+	omap_i2c_wait_for_bb(omap);
+
+	if (omap->set_mpu_wkup_lat != NULL)
+		omap->set_mpu_wkup_lat(omap->dev, -1);
+
+out:
+	pm_runtime_mark_last_busy(omap->dev);
+	pm_runtime_put_autosuspend(omap->dev);
+	return r;
+}
+
+static u32
+omap_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+static inline void
+omap_i2c_complete_cmd(struct omap_i2c_dev *omap, u16 err)
+{
+	omap->cmd_err |= err;
+	complete(&omap->cmd_complete);
+}
+
+static inline void
+omap_i2c_ack_stat(struct omap_i2c_dev *omap, u16 stat)
+{
+	omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, stat);
+}
+
+static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat)
+{
+	/*
+	 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
+	 * Not applicable for OMAP4.
+	 * Under certain rare conditions, RDR could be set again
+	 * when the bus is busy, then ignore the interrupt and
+	 * clear the interrupt.
+	 */
+	if (stat & OMAP_I2C_STAT_RDR) {
+		/* Step 1: If RDR is set, clear it */
+		omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
+
+		/* Step 2: */
+		if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_BB)) {
+
+			/* Step 3: */
+			if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_RDR) {
+				omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
+				dev_dbg(omap->dev, "RDR when bus is busy.\n");
+			}
+
+		}
+	}
+}
+
+/* rev1 devices are apparently only on some 15xx */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+static irqreturn_t
+omap_i2c_omap1_isr(int this_irq, void *dev_id)
+{
+	struct omap_i2c_dev *omap = dev_id;
+	u16 iv, w;
+
+	if (pm_runtime_suspended(omap->dev))
+		return IRQ_NONE;
+
+	iv = omap_i2c_read_reg(omap, OMAP_I2C_IV_REG);
+	switch (iv) {
+	case 0x00:	/* None */
+		break;
+	case 0x01:	/* Arbitration lost */
+		dev_err(omap->dev, "Arbitration lost\n");
+		omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL);
+		break;
+	case 0x02:	/* No acknowledgement */
+		omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK);
+		omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
+		break;
+	case 0x03:	/* Register access ready */
+		omap_i2c_complete_cmd(omap, 0);
+		break;
+	case 0x04:	/* Receive data ready */
+		if (omap->buf_len) {
+			w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
+			*omap->buf++ = w;
+			omap->buf_len--;
+			if (omap->buf_len) {
+				*omap->buf++ = w >> 8;
+				omap->buf_len--;
+			}
+		} else
+			dev_err(omap->dev, "RRDY IRQ while no data requested\n");
+		break;
+	case 0x05:	/* Transmit data ready */
+		if (omap->buf_len) {
+			w = *omap->buf++;
+			omap->buf_len--;
+			if (omap->buf_len) {
+				w |= *omap->buf++ << 8;
+				omap->buf_len--;
+			}
+			omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
+		} else
+			dev_err(omap->dev, "XRDY IRQ while no data to send\n");
+		break;
+	default:
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+#else
+#define omap_i2c_omap1_isr		NULL
+#endif
+
+/*
+ * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
+ * data to DATA_REG. Otherwise some data bytes can be lost while transferring
+ * them from the memory to the I2C interface.
+ */
+static int errata_omap3_i462(struct omap_i2c_dev *omap)
+{
+	unsigned long timeout = 10000;
+	u16 stat;
+
+	do {
+		stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+		if (stat & OMAP_I2C_STAT_XUDF)
+			break;
+
+		if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_XRDY |
+							OMAP_I2C_STAT_XDR));
+			if (stat & OMAP_I2C_STAT_NACK) {
+				omap->cmd_err |= OMAP_I2C_STAT_NACK;
+				omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
+			}
+
+			if (stat & OMAP_I2C_STAT_AL) {
+				dev_err(omap->dev, "Arbitration lost\n");
+				omap->cmd_err |= OMAP_I2C_STAT_AL;
+				omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
+			}
+
+			return -EIO;
+		}
+
+		cpu_relax();
+	} while (--timeout);
+
+	if (!timeout) {
+		dev_err(omap->dev, "timeout waiting on XUDF bit\n");
+		return 0;
+	}
+
+	return 0;
+}
+
+static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes,
+		bool is_rdr)
+{
+	u16		w;
+
+	while (num_bytes--) {
+		w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
+		*omap->buf++ = w;
+		omap->buf_len--;
+
+		/*
+		 * Data reg in 2430, omap3 and
+		 * omap4 is 8 bit wide
+		 */
+		if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
+			*omap->buf++ = w >> 8;
+			omap->buf_len--;
+		}
+	}
+}
+
+static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes,
+		bool is_xdr)
+{
+	u16		w;
+
+	while (num_bytes--) {
+		w = *omap->buf++;
+		omap->buf_len--;
+
+		/*
+		 * Data reg in 2430, omap3 and
+		 * omap4 is 8 bit wide
+		 */
+		if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
+			w |= *omap->buf++ << 8;
+			omap->buf_len--;
+		}
+
+		if (omap->errata & I2C_OMAP_ERRATA_I462) {
+			int ret;
+
+			ret = errata_omap3_i462(omap);
+			if (ret < 0)
+				return ret;
+		}
+
+		omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
+	}
+
+	return 0;
+}
+
+static irqreturn_t
+omap_i2c_isr(int irq, void *dev_id)
+{
+	struct omap_i2c_dev *omap = dev_id;
+	irqreturn_t ret = IRQ_HANDLED;
+	u16 mask;
+	u16 stat;
+
+	stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+	mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
+
+	if (stat & mask)
+		ret = IRQ_WAKE_THREAD;
+
+	return ret;
+}
+
+static irqreturn_t
+omap_i2c_isr_thread(int this_irq, void *dev_id)
+{
+	struct omap_i2c_dev *omap = dev_id;
+	u16 bits;
+	u16 stat;
+	int err = 0, count = 0;
+
+	do {
+		bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
+		stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+		stat &= bits;
+
+		/* If we're in receiver mode, ignore XDR/XRDY */
+		if (omap->receiver)
+			stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY);
+		else
+			stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY);
+
+		if (!stat) {
+			/* my work here is done */
+			goto out;
+		}
+
+		dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat);
+		if (count++ == 100) {
+			dev_warn(omap->dev, "Too much work in one IRQ\n");
+			break;
+		}
+
+		if (stat & OMAP_I2C_STAT_NACK) {
+			err |= OMAP_I2C_STAT_NACK;
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
+		}
+
+		if (stat & OMAP_I2C_STAT_AL) {
+			dev_err(omap->dev, "Arbitration lost\n");
+			err |= OMAP_I2C_STAT_AL;
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
+		}
+
+		/*
+		 * ProDB0017052: Clear ARDY bit twice
+		 */
+		if (stat & OMAP_I2C_STAT_ARDY)
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ARDY);
+
+		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
+					OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_RRDY |
+						OMAP_I2C_STAT_RDR |
+						OMAP_I2C_STAT_XRDY |
+						OMAP_I2C_STAT_XDR |
+						OMAP_I2C_STAT_ARDY));
+			break;
+		}
+
+		if (stat & OMAP_I2C_STAT_RDR) {
+			u8 num_bytes = 1;
+
+			if (omap->fifo_size)
+				num_bytes = omap->buf_len;
+
+			if (omap->errata & I2C_OMAP_ERRATA_I207) {
+				i2c_omap_errata_i207(omap, stat);
+				num_bytes = (omap_i2c_read_reg(omap,
+					OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
+			}
+
+			omap_i2c_receive_data(omap, num_bytes, true);
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
+			continue;
+		}
+
+		if (stat & OMAP_I2C_STAT_RRDY) {
+			u8 num_bytes = 1;
+
+			if (omap->threshold)
+				num_bytes = omap->threshold;
+
+			omap_i2c_receive_data(omap, num_bytes, false);
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY);
+			continue;
+		}
+
+		if (stat & OMAP_I2C_STAT_XDR) {
+			u8 num_bytes = 1;
+			int ret;
+
+			if (omap->fifo_size)
+				num_bytes = omap->buf_len;
+
+			ret = omap_i2c_transmit_data(omap, num_bytes, true);
+			if (ret < 0)
+				break;
+
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XDR);
+			continue;
+		}
+
+		if (stat & OMAP_I2C_STAT_XRDY) {
+			u8 num_bytes = 1;
+			int ret;
+
+			if (omap->threshold)
+				num_bytes = omap->threshold;
+
+			ret = omap_i2c_transmit_data(omap, num_bytes, false);
+			if (ret < 0)
+				break;
+
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XRDY);
+			continue;
+		}
+
+		if (stat & OMAP_I2C_STAT_ROVR) {
+			dev_err(omap->dev, "Receive overrun\n");
+			err |= OMAP_I2C_STAT_ROVR;
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ROVR);
+			break;
+		}
+
+		if (stat & OMAP_I2C_STAT_XUDF) {
+			dev_err(omap->dev, "Transmit underflow\n");
+			err |= OMAP_I2C_STAT_XUDF;
+			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XUDF);
+			break;
+		}
+	} while (stat);
+
+	omap_i2c_complete_cmd(omap, err);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static const struct i2c_algorithm omap_i2c_algo = {
+	.master_xfer	= omap_i2c_xfer,
+	.functionality	= omap_i2c_func,
+};
+
+#ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_NO_FIFO |
+			OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			OMAP_I2C_FLAG_16BIT_DATA_REG |
+			OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+			OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
+static struct omap_i2c_bus_platform_data omap3_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap4_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_2,
+};
+
+static const struct of_device_id omap_i2c_of_match[] = {
+	{
+		.compatible = "ti,omap4-i2c",
+		.data = &omap4_pdata,
+	},
+	{
+		.compatible = "ti,omap3-i2c",
+		.data = &omap3_pdata,
+	},
+	{
+		.compatible = "ti,omap2430-i2c",
+		.data = &omap2430_pdata,
+	},
+	{
+		.compatible = "ti,omap2420-i2c",
+		.data = &omap2420_pdata,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
+#endif
+
+#define OMAP_I2C_SCHEME(rev)		((rev & 0xc000) >> 14)
+
+#define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4)
+#define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf)
+
+#define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7)
+#define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f)
+#define OMAP_I2C_SCHEME_0		0
+#define OMAP_I2C_SCHEME_1		1
+
+static int omap_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+
+	return reg & OMAP_I2C_SYSTEST_SCL_I_FUNC;
+}
+
+static int omap_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+
+	return reg & OMAP_I2C_SYSTEST_SDA_I_FUNC;
+}
+
+static void omap_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	if (val)
+		reg |= OMAP_I2C_SYSTEST_SCL_O;
+	else
+		reg &= ~OMAP_I2C_SYSTEST_SCL_O;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static void omap_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	/* enable test mode */
+	reg |= OMAP_I2C_SYSTEST_ST_EN;
+	/* select SDA/SCL IO mode */
+	reg |= 3 << OMAP_I2C_SYSTEST_TMODE_SHIFT;
+	/* set SCL to high-impedance state (reset value is 0) */
+	reg |= OMAP_I2C_SYSTEST_SCL_O;
+	/* set SDA to high-impedance state (reset value is 0) */
+	reg |= OMAP_I2C_SYSTEST_SDA_O;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	/* restore reset values */
+	reg &= ~OMAP_I2C_SYSTEST_ST_EN;
+	reg &= ~OMAP_I2C_SYSTEST_TMODE_MASK;
+	reg &= ~OMAP_I2C_SYSTEST_SCL_O;
+	reg &= ~OMAP_I2C_SYSTEST_SDA_O;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = {
+	.get_scl		= omap_i2c_get_scl,
+	.get_sda		= omap_i2c_get_sda,
+	.set_scl		= omap_i2c_set_scl,
+	.prepare_recovery	= omap_i2c_prepare_recovery,
+	.unprepare_recovery	= omap_i2c_unprepare_recovery,
+	.recover_bus		= i2c_generic_scl_recovery,
+};
+
+static int
+omap_i2c_probe(struct platform_device *pdev)
+{
+	struct omap_i2c_dev	*omap;
+	struct i2c_adapter	*adap;
+	struct resource		*mem;
+	const struct omap_i2c_bus_platform_data *pdata =
+		dev_get_platdata(&pdev->dev);
+	struct device_node	*node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	int irq;
+	int r;
+	u32 rev;
+	u16 minor, major;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		return irq;
+	}
+
+	omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
+	if (!omap)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	omap->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(omap->base))
+		return PTR_ERR(omap->base);
+
+	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
+	if (match) {
+		u32 freq = 100000; /* default to 100000 Hz */
+
+		pdata = match->data;
+		omap->flags = pdata->flags;
+
+		of_property_read_u32(node, "clock-frequency", &freq);
+		/* convert DT freq value in Hz into kHz for speed */
+		omap->speed = freq / 1000;
+	} else if (pdata != NULL) {
+		omap->speed = pdata->clkrate;
+		omap->flags = pdata->flags;
+		omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+	}
+
+	omap->dev = &pdev->dev;
+	omap->irq = irq;
+
+	platform_set_drvdata(pdev, omap);
+	init_completion(&omap->cmd_complete);
+
+	omap->reg_shift = (omap->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
+
+	pm_runtime_enable(omap->dev);
+	pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(omap->dev);
+
+	r = pm_runtime_get_sync(omap->dev);
+	if (r < 0)
+		goto err_free_mem;
+
+	/*
+	 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
+	 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
+	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
+	 * readw_relaxed is done.
+	 */
+	rev = readw_relaxed(omap->base + 0x04);
+
+	omap->scheme = OMAP_I2C_SCHEME(rev);
+	switch (omap->scheme) {
+	case OMAP_I2C_SCHEME_0:
+		omap->regs = (u8 *)reg_map_ip_v1;
+		omap->rev = omap_i2c_read_reg(omap, OMAP_I2C_REV_REG);
+		minor = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
+		major = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
+		break;
+	case OMAP_I2C_SCHEME_1:
+		/* FALLTHROUGH */
+	default:
+		omap->regs = (u8 *)reg_map_ip_v2;
+		rev = (rev << 16) |
+			omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_REVNB_LO);
+		minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev);
+		major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev);
+		omap->rev = rev;
+	}
+
+	omap->errata = 0;
+
+	if (omap->rev >= OMAP_I2C_REV_ON_2430 &&
+			omap->rev < OMAP_I2C_REV_ON_4430_PLUS)
+		omap->errata |= I2C_OMAP_ERRATA_I207;
+
+	if (omap->rev <= OMAP_I2C_REV_ON_3430_3530)
+		omap->errata |= I2C_OMAP_ERRATA_I462;
+
+	if (!(omap->flags & OMAP_I2C_FLAG_NO_FIFO)) {
+		u16 s;
+
+		/* Set up the fifo size - Get total size */
+		s = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
+		omap->fifo_size = 0x8 << s;
+
+		/*
+		 * Set up notification threshold as half the total available
+		 * size. This is to ensure that we can handle the status on int
+		 * call back latencies.
+		 */
+
+		omap->fifo_size = (omap->fifo_size / 2);
+
+		if (omap->rev < OMAP_I2C_REV_ON_3630)
+			omap->b_hw = 1; /* Enable hardware fixes */
+
+		/* calculate wakeup latency constraint for MPU */
+		if (omap->set_mpu_wkup_lat != NULL)
+			omap->latency = (1000000 * omap->fifo_size) /
+				       (1000 * omap->speed / 8);
+	}
+
+	/* reset ASAP, clearing any IRQs */
+	omap_i2c_init(omap);
+
+	if (omap->rev < OMAP_I2C_OMAP1_REV_2)
+		r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
+				IRQF_NO_SUSPEND, pdev->name, omap);
+	else
+		r = devm_request_threaded_irq(&pdev->dev, omap->irq,
+				omap_i2c_isr, omap_i2c_isr_thread,
+				IRQF_NO_SUSPEND | IRQF_ONESHOT,
+				pdev->name, omap);
+
+	if (r) {
+		dev_err(omap->dev, "failure requesting irq %i\n", omap->irq);
+		goto err_unuse_clocks;
+	}
+
+	adap = &omap->adapter;
+	i2c_set_adapdata(adap, omap);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DEPRECATED;
+	strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+	adap->algo = &omap_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+	adap->bus_recovery_info = &omap_i2c_bus_recovery_info;
+
+	/* i2c device drivers may be active on return from add_adapter() */
+	adap->nr = pdev->id;
+	r = i2c_add_numbered_adapter(adap);
+	if (r)
+		goto err_unuse_clocks;
+
+	dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
+		 major, minor, omap->speed);
+
+	pm_runtime_mark_last_busy(omap->dev);
+	pm_runtime_put_autosuspend(omap->dev);
+
+	return 0;
+
+err_unuse_clocks:
+	omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+	pm_runtime_dont_use_autosuspend(omap->dev);
+	pm_runtime_put_sync(omap->dev);
+	pm_runtime_disable(&pdev->dev);
+err_free_mem:
+
+	return r;
+}
+
+static int omap_i2c_remove(struct platform_device *pdev)
+{
+	struct omap_i2c_dev	*omap = platform_get_drvdata(pdev);
+	int ret;
+
+	i2c_del_adapter(&omap->adapter);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		return ret;
+
+	omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
+{
+	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
+
+	omap->iestate = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
+
+	if (omap->scheme == OMAP_I2C_SCHEME_0)
+		omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, 0);
+	else
+		omap_i2c_write_reg(omap, OMAP_I2C_IP_V2_IRQENABLE_CLR,
+				   OMAP_I2C_IP_V2_INTERRUPTS_MASK);
+
+	if (omap->rev < OMAP_I2C_OMAP1_REV_2) {
+		omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); /* Read clears */
+	} else {
+		omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, omap->iestate);
+
+		/* Flush posted write */
+		omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+	}
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
+{
+	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (!omap->regs)
+		return 0;
+
+	__omap_i2c_init(omap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_i2c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
+			   omap_i2c_runtime_resume, NULL)
+};
+
+static struct platform_driver omap_i2c_driver = {
+	.probe		= omap_i2c_probe,
+	.remove		= omap_i2c_remove,
+	.driver		= {
+		.name	= "omap_i2c",
+		.pm	= &omap_i2c_pm_ops,
+		.of_match_table = of_match_ptr(omap_i2c_of_match),
+	},
+};
+
+/* I2C may be needed to bring up other drivers */
+static int __init
+omap_i2c_init_driver(void)
+{
+	return platform_driver_register(&omap_i2c_driver);
+}
+subsys_initcall(omap_i2c_init_driver);
+
+static void __exit omap_i2c_exit_driver(void)
+{
+	platform_driver_unregister(&omap_i2c_driver);
+}
+module_exit(omap_i2c_exit_driver);
+
+MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
+MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap_i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-opal.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-opal.c
new file mode 100644
index 0000000..0aabb7e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-opal.c
@@ -0,0 +1,294 @@
+/*
+ * IBM OPAL I2C driver
+ * Copyright (C) 2014 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/firmware.h>
+#include <asm/opal.h>
+
+static int i2c_opal_translate_error(int rc)
+{
+	switch (rc) {
+	case OPAL_NO_MEM:
+		return -ENOMEM;
+	case OPAL_PARAMETER:
+		return -EINVAL;
+	case OPAL_I2C_ARBT_LOST:
+		return -EAGAIN;
+	case OPAL_I2C_TIMEOUT:
+		return -ETIMEDOUT;
+	case OPAL_I2C_NACK_RCVD:
+		return -ENXIO;
+	case OPAL_I2C_STOP_ERR:
+		return -EBUSY;
+	default:
+		return -EIO;
+	}
+}
+
+static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req)
+{
+	struct opal_msg msg;
+	int token, rc;
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			pr_err("Failed to get the async token\n");
+
+		return token;
+	}
+
+	rc = opal_i2c_request(token, bus_id, req);
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		rc = i2c_opal_translate_error(rc);
+		goto exit;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	if (rc)
+		goto exit;
+
+	rc = opal_get_async_rc(msg);
+	if (rc != OPAL_SUCCESS) {
+		rc = i2c_opal_translate_error(rc);
+		goto exit;
+	}
+
+exit:
+	opal_async_release_token(token);
+	return rc;
+}
+
+static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	unsigned long opal_id = (unsigned long)adap->algo_data;
+	struct opal_i2c_request req;
+	int rc, i;
+
+	/* We only support fairly simple combinations here of one
+	 * or two messages
+	 */
+	memset(&req, 0, sizeof(req));
+	switch(num) {
+	case 0:
+		return 0;
+	case 1:
+		req.type = (msgs[0].flags & I2C_M_RD) ?
+			OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+		req.addr = cpu_to_be16(msgs[0].addr);
+		req.size = cpu_to_be32(msgs[0].len);
+		req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
+		break;
+	case 2:
+		req.type = (msgs[1].flags & I2C_M_RD) ?
+			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+		req.addr = cpu_to_be16(msgs[0].addr);
+		req.subaddr_sz = msgs[0].len;
+		for (i = 0; i < msgs[0].len; i++)
+			req.subaddr = (req.subaddr << 8) | msgs[0].buf[i];
+		req.subaddr = cpu_to_be32(req.subaddr);
+		req.size = cpu_to_be32(msgs[1].len);
+		req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	rc = i2c_opal_send_request(opal_id, &req);
+	if (rc)
+		return rc;
+
+	return num;
+}
+
+static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size, union i2c_smbus_data *data)
+{
+	unsigned long opal_id = (unsigned long)adap->algo_data;
+	struct opal_i2c_request req;
+	u8 local[2];
+	int rc;
+
+	memset(&req, 0, sizeof(req));
+
+	req.addr = cpu_to_be16(addr);
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+		req.size = cpu_to_be32(1);
+		/* Fall through */
+	case I2C_SMBUS_QUICK:
+		req.type = (read_write == I2C_SMBUS_READ) ?
+			OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+		req.size = cpu_to_be32(1);
+		req.subaddr = cpu_to_be32(command);
+		req.subaddr_sz = 1;
+		req.type = (read_write == I2C_SMBUS_READ) ?
+			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (!read_write) {
+			local[0] = data->word & 0xff;
+			local[1] = (data->word >> 8) & 0xff;
+		}
+		req.buffer_ra = cpu_to_be64(__pa(local));
+		req.size = cpu_to_be32(2);
+		req.subaddr = cpu_to_be32(command);
+		req.subaddr_sz = 1;
+		req.type = (read_write == I2C_SMBUS_READ) ?
+			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		req.buffer_ra = cpu_to_be64(__pa(&data->block[1]));
+		req.size = cpu_to_be32(data->block[0]);
+		req.subaddr = cpu_to_be32(command);
+		req.subaddr_sz = 1;
+		req.type = (read_write == I2C_SMBUS_READ) ?
+			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	rc = i2c_opal_send_request(opal_id, &req);
+	if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) {
+		data->word = ((u16)local[1]) << 8;
+		data->word |= local[0];
+	}
+
+	return rc;
+}
+
+static u32 i2c_opal_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm i2c_opal_algo = {
+	.master_xfer	= i2c_opal_master_xfer,
+	.smbus_xfer	= i2c_opal_smbus_xfer,
+	.functionality	= i2c_opal_func,
+};
+
+/*
+ * For two messages, we basically support simple smbus transactions of a
+ * write-then-anything.
+ */
+static const struct i2c_adapter_quirks i2c_opal_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 4,
+};
+
+static int i2c_opal_probe(struct platform_device *pdev)
+{
+	struct i2c_adapter	*adapter;
+	const char		*pname;
+	u32			opal_id;
+	int			rc;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id);
+	if (rc) {
+		dev_err(&pdev->dev, "Missing ibm,opal-id property !\n");
+		return -EIO;
+	}
+
+	adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL);
+	if (!adapter)
+		return -ENOMEM;
+
+	adapter->algo = &i2c_opal_algo;
+	adapter->algo_data = (void *)(unsigned long)opal_id;
+	adapter->quirks = &i2c_opal_quirks;
+	adapter->dev.parent = &pdev->dev;
+	adapter->dev.of_node = of_node_get(pdev->dev.of_node);
+	pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
+	if (pname)
+		strlcpy(adapter->name, pname, sizeof(adapter->name));
+	else
+		strlcpy(adapter->name, "opal", sizeof(adapter->name));
+
+	platform_set_drvdata(pdev, adapter);
+	rc = i2c_add_adapter(adapter);
+	if (rc)
+		dev_err(&pdev->dev, "Failed to register the i2c adapter\n");
+
+	return rc;
+}
+
+static int i2c_opal_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(adapter);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_opal_of_match[] = {
+	{
+		.compatible = "ibm,opal-i2c",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, i2c_opal_of_match);
+
+static struct platform_driver i2c_opal_driver = {
+	.probe	= i2c_opal_probe,
+	.remove	= i2c_opal_remove,
+	.driver	= {
+		.name		= "i2c-opal",
+		.of_match_table	= i2c_opal_of_match,
+	},
+};
+
+static int __init i2c_opal_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	return platform_driver_register(&i2c_opal_driver);
+}
+module_init(i2c_opal_init);
+
+static void __exit i2c_opal_exit(void)
+{
+	return platform_driver_unregister(&i2c_opal_driver);
+}
+module_exit(i2c_opal_exit);
+
+MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM OPAL I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport-light.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport-light.c
new file mode 100644
index 0000000..faa8fb8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport-light.c
@@ -0,0 +1,276 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport-light.c I2C bus over parallel port                           *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2010 Jean Delvare <jdelvare@suse.de>
+
+   Based on older i2c-velleman.c driver
+   Copyright (C) 1995-2000 Simon G. Vogl
+   With some changes from:
+   Frodo Looijaard <frodol@dds.nl>
+   Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ * ------------------------------------------------------------------------ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-smbus.h>
+#include <linux/io.h>
+#include "i2c-parport.h"
+
+#define DEFAULT_BASE 0x378
+#define DRVNAME "i2c-parport-light"
+
+static struct platform_device *pdev;
+
+static u16 base;
+module_param_hw(base, ushort, ioport, 0);
+MODULE_PARM_DESC(base, "Base I/O address");
+
+static int irq;
+module_param_hw(irq, int, irq, 0);
+MODULE_PARM_DESC(irq, "IRQ (optional)");
+
+/* ----- Low-level parallel port access ----------------------------------- */
+
+static inline void port_write(unsigned char p, unsigned char d)
+{
+	outb(d, base+p);
+}
+
+static inline unsigned char port_read(unsigned char p)
+{
+	return inb(base+p);
+}
+
+/* ----- Unified line operation functions --------------------------------- */
+
+static inline void line_set(int state, const struct lineop *op)
+{
+	u8 oldval = port_read(op->port);
+
+	/* Touch only the bit(s) needed */
+	if ((op->inverted && !state) || (!op->inverted && state))
+		port_write(op->port, oldval | op->val);
+	else
+		port_write(op->port, oldval & ~op->val);
+}
+
+static inline int line_get(const struct lineop *op)
+{
+	u8 oldval = port_read(op->port);
+
+	return ((op->inverted && (oldval & op->val) != op->val)
+	    || (!op->inverted && (oldval & op->val) == op->val));
+}
+
+/* ----- I2C algorithm call-back functions and structures ----------------- */
+
+static void parport_setscl(void *data, int state)
+{
+	line_set(state, &adapter_parm[type].setscl);
+}
+
+static void parport_setsda(void *data, int state)
+{
+	line_set(state, &adapter_parm[type].setsda);
+}
+
+static int parport_getscl(void *data)
+{
+	return line_get(&adapter_parm[type].getscl);
+}
+
+static int parport_getsda(void *data)
+{
+	return line_get(&adapter_parm[type].getsda);
+}
+
+/* Encapsulate the functions above in the correct structure
+   Note that getscl will be set to NULL by the attaching code for adapters
+   that cannot read SCL back */
+static struct i2c_algo_bit_data parport_algo_data = {
+	.setsda		= parport_setsda,
+	.setscl		= parport_setscl,
+	.getsda		= parport_getsda,
+	.getscl		= parport_getscl,
+	.udelay		= 50,
+	.timeout	= HZ,
+};
+
+/* ----- Driver registration ---------------------------------------------- */
+
+static struct i2c_adapter parport_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo_data	= &parport_algo_data,
+	.name		= "Parallel port adapter (light)",
+};
+
+/* SMBus alert support */
+static struct i2c_smbus_alert_setup alert_data = {
+	.alert_edge_triggered	= 1,
+};
+static struct i2c_client *ara;
+static struct lineop parport_ctrl_irq = {
+	.val		= (1 << 4),
+	.port		= PORT_CTRL,
+};
+
+static int i2c_parport_probe(struct platform_device *pdev)
+{
+	int err;
+
+	/* Reset hardware to a sane state (SCL and SDA high) */
+	parport_setsda(NULL, 1);
+	parport_setscl(NULL, 1);
+	/* Other init if needed (power on...) */
+	if (adapter_parm[type].init.val) {
+		line_set(1, &adapter_parm[type].init);
+		/* Give powered devices some time to settle */
+		msleep(100);
+	}
+
+	parport_adapter.dev.parent = &pdev->dev;
+	err = i2c_bit_add_bus(&parport_adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to register with I2C\n");
+		return err;
+	}
+
+	/* Setup SMBus alert if supported */
+	if (adapter_parm[type].smbus_alert && irq) {
+		alert_data.irq = irq;
+		ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data);
+		if (ara)
+			line_set(1, &parport_ctrl_irq);
+		else
+			dev_warn(&pdev->dev, "Failed to register ARA client\n");
+	}
+
+	return 0;
+}
+
+static int i2c_parport_remove(struct platform_device *pdev)
+{
+	if (ara) {
+		line_set(0, &parport_ctrl_irq);
+		i2c_unregister_device(ara);
+		ara = NULL;
+	}
+	i2c_del_adapter(&parport_adapter);
+
+	/* Un-init if needed (power off...) */
+	if (adapter_parm[type].init.val)
+		line_set(0, &adapter_parm[type].init);
+
+	return 0;
+}
+
+static struct platform_driver i2c_parport_driver = {
+	.driver = {
+		.name	= DRVNAME,
+	},
+	.probe		= i2c_parport_probe,
+	.remove		= i2c_parport_remove,
+};
+
+static int __init i2c_parport_device_add(u16 address)
+{
+	int err;
+
+	pdev = platform_device_alloc(DRVNAME, -1);
+	if (!pdev) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		goto exit;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+		       err);
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	return err;
+}
+
+static int __init i2c_parport_init(void)
+{
+	int err;
+
+	if (type < 0) {
+		printk(KERN_ERR DRVNAME ": adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
+		printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type);
+		return -ENODEV;
+	}
+
+	if (base == 0) {
+		pr_info(DRVNAME ": using default base 0x%x\n", DEFAULT_BASE);
+		base = DEFAULT_BASE;
+	}
+
+	if (!request_region(base, 3, DRVNAME))
+		return -EBUSY;
+
+	if (irq != 0)
+		pr_info(DRVNAME ": using irq %d\n", irq);
+
+	if (!adapter_parm[type].getscl.val)
+		parport_algo_data.getscl = NULL;
+
+	/* Sets global pdev as a side effect */
+	err = i2c_parport_device_add(base);
+	if (err)
+		goto exit_release;
+
+	err = platform_driver_register(&i2c_parport_driver);
+	if (err)
+		goto exit_device;
+
+	return 0;
+
+exit_device:
+	platform_device_unregister(pdev);
+exit_release:
+	release_region(base, 3);
+	return err;
+}
+
+static void __exit i2c_parport_exit(void)
+{
+	platform_driver_unregister(&i2c_parport_driver);
+	platform_device_unregister(pdev);
+	release_region(base, 3);
+}
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I2C bus over parallel port (light)");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_parport_init);
+module_exit(i2c_parport_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.c
new file mode 100644
index 0000000..a8e54df
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.c
@@ -0,0 +1,331 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport.c I2C bus over parallel port                                 *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2011 Jean Delvare <jdelvare@suse.de>
+
+   Based on older i2c-philips-par.c driver
+   Copyright (C) 1995-2000 Simon G. Vogl
+   With some changes from:
+   Frodo Looijaard <frodol@dds.nl>
+   Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ * ------------------------------------------------------------------------ */
+
+#define pr_fmt(fmt) "i2c-parport: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/parport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-smbus.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include "i2c-parport.h"
+
+/* ----- Device list ------------------------------------------------------ */
+
+struct i2c_par {
+	struct pardevice *pdev;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo_data;
+	struct i2c_smbus_alert_setup alert_data;
+	struct i2c_client *ara;
+	struct list_head node;
+};
+
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(adapter_list_lock);
+#define MAX_DEVICE 4
+static int parport[MAX_DEVICE] = {0, -1, -1, -1};
+
+
+/* ----- Low-level parallel port access ----------------------------------- */
+
+static void port_write_data(struct parport *p, unsigned char d)
+{
+	parport_write_data(p, d);
+}
+
+static void port_write_control(struct parport *p, unsigned char d)
+{
+	parport_write_control(p, d);
+}
+
+static unsigned char port_read_data(struct parport *p)
+{
+	return parport_read_data(p);
+}
+
+static unsigned char port_read_status(struct parport *p)
+{
+	return parport_read_status(p);
+}
+
+static unsigned char port_read_control(struct parport *p)
+{
+	return parport_read_control(p);
+}
+
+static void (* const port_write[])(struct parport *, unsigned char) = {
+	port_write_data,
+	NULL,
+	port_write_control,
+};
+
+static unsigned char (* const port_read[])(struct parport *) = {
+	port_read_data,
+	port_read_status,
+	port_read_control,
+};
+
+/* ----- Unified line operation functions --------------------------------- */
+
+static inline void line_set(struct parport *data, int state,
+	const struct lineop *op)
+{
+	u8 oldval = port_read[op->port](data);
+
+	/* Touch only the bit(s) needed */
+	if ((op->inverted && !state) || (!op->inverted && state))
+		port_write[op->port](data, oldval | op->val);
+	else
+		port_write[op->port](data, oldval & ~op->val);
+}
+
+static inline int line_get(struct parport *data,
+	const struct lineop *op)
+{
+	u8 oldval = port_read[op->port](data);
+
+	return ((op->inverted && (oldval & op->val) != op->val)
+	    || (!op->inverted && (oldval & op->val) == op->val));
+}
+
+/* ----- I2C algorithm call-back functions and structures ----------------- */
+
+static void parport_setscl(void *data, int state)
+{
+	line_set((struct parport *) data, state, &adapter_parm[type].setscl);
+}
+
+static void parport_setsda(void *data, int state)
+{
+	line_set((struct parport *) data, state, &adapter_parm[type].setsda);
+}
+
+static int parport_getscl(void *data)
+{
+	return line_get((struct parport *) data, &adapter_parm[type].getscl);
+}
+
+static int parport_getsda(void *data)
+{
+	return line_get((struct parport *) data, &adapter_parm[type].getsda);
+}
+
+/* Encapsulate the functions above in the correct structure.
+   Note that this is only a template, from which the real structures are
+   copied. The attaching code will set getscl to NULL for adapters that
+   cannot read SCL back, and will also make the data field point to
+   the parallel port structure. */
+static const struct i2c_algo_bit_data parport_algo_data = {
+	.setsda		= parport_setsda,
+	.setscl		= parport_setscl,
+	.getsda		= parport_getsda,
+	.getscl		= parport_getscl,
+	.udelay		= 10, /* ~50 kbps */
+	.timeout	= HZ,
+};
+
+/* ----- I2c and parallel port call-back functions and structures --------- */
+
+static void i2c_parport_irq(void *data)
+{
+	struct i2c_par *adapter = data;
+	struct i2c_client *ara = adapter->ara;
+
+	if (ara) {
+		dev_dbg(&ara->dev, "SMBus alert received\n");
+		i2c_handle_smbus_alert(ara);
+	} else
+		dev_dbg(&adapter->adapter.dev,
+			"SMBus alert received but no ARA client!\n");
+}
+
+static void i2c_parport_attach(struct parport *port)
+{
+	struct i2c_par *adapter;
+	int i;
+	struct pardev_cb i2c_parport_cb;
+
+	for (i = 0; i < MAX_DEVICE; i++) {
+		if (parport[i] == -1)
+			continue;
+		if (port->number == parport[i])
+			break;
+	}
+	if (i == MAX_DEVICE) {
+		pr_debug("Not using parport%d.\n", port->number);
+		return;
+	}
+
+	adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
+	if (!adapter)
+		return;
+	memset(&i2c_parport_cb, 0, sizeof(i2c_parport_cb));
+	i2c_parport_cb.flags = PARPORT_FLAG_EXCL;
+	i2c_parport_cb.irq_func = i2c_parport_irq;
+	i2c_parport_cb.private = adapter;
+
+	pr_debug("attaching to %s\n", port->name);
+	parport_disable_irq(port);
+	adapter->pdev = parport_register_dev_model(port, "i2c-parport",
+						   &i2c_parport_cb, i);
+	if (!adapter->pdev) {
+		pr_err("Unable to register with parport\n");
+		goto err_free;
+	}
+
+	/* Fill the rest of the structure */
+	adapter->adapter.owner = THIS_MODULE;
+	adapter->adapter.class = I2C_CLASS_HWMON;
+	strlcpy(adapter->adapter.name, "Parallel port adapter",
+		sizeof(adapter->adapter.name));
+	adapter->algo_data = parport_algo_data;
+	/* Slow down if we can't sense SCL */
+	if (!adapter_parm[type].getscl.val) {
+		adapter->algo_data.getscl = NULL;
+		adapter->algo_data.udelay = 50; /* ~10 kbps */
+	}
+	adapter->algo_data.data = port;
+	adapter->adapter.algo_data = &adapter->algo_data;
+	adapter->adapter.dev.parent = port->physport->dev;
+
+	if (parport_claim_or_block(adapter->pdev) < 0) {
+		dev_err(&adapter->pdev->dev,
+			"Could not claim parallel port\n");
+		goto err_unregister;
+	}
+
+	/* Reset hardware to a sane state (SCL and SDA high) */
+	parport_setsda(port, 1);
+	parport_setscl(port, 1);
+	/* Other init if needed (power on...) */
+	if (adapter_parm[type].init.val) {
+		line_set(port, 1, &adapter_parm[type].init);
+		/* Give powered devices some time to settle */
+		msleep(100);
+	}
+
+	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
+		dev_err(&adapter->pdev->dev, "Unable to register with I2C\n");
+		goto err_unregister;
+	}
+
+	/* Setup SMBus alert if supported */
+	if (adapter_parm[type].smbus_alert) {
+		adapter->alert_data.alert_edge_triggered = 1;
+		adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
+						     &adapter->alert_data);
+		if (adapter->ara)
+			parport_enable_irq(port);
+		else
+			dev_warn(&adapter->pdev->dev,
+				 "Failed to register ARA client\n");
+	}
+
+	/* Add the new adapter to the list */
+	mutex_lock(&adapter_list_lock);
+	list_add_tail(&adapter->node, &adapter_list);
+	mutex_unlock(&adapter_list_lock);
+	return;
+
+ err_unregister:
+	parport_release(adapter->pdev);
+	parport_unregister_device(adapter->pdev);
+ err_free:
+	kfree(adapter);
+}
+
+static void i2c_parport_detach(struct parport *port)
+{
+	struct i2c_par *adapter, *_n;
+
+	/* Walk the list */
+	mutex_lock(&adapter_list_lock);
+	list_for_each_entry_safe(adapter, _n, &adapter_list, node) {
+		if (adapter->pdev->port == port) {
+			if (adapter->ara) {
+				parport_disable_irq(port);
+				i2c_unregister_device(adapter->ara);
+			}
+			i2c_del_adapter(&adapter->adapter);
+
+			/* Un-init if needed (power off...) */
+			if (adapter_parm[type].init.val)
+				line_set(port, 0, &adapter_parm[type].init);
+
+			parport_release(adapter->pdev);
+			parport_unregister_device(adapter->pdev);
+			list_del(&adapter->node);
+			kfree(adapter);
+		}
+	}
+	mutex_unlock(&adapter_list_lock);
+}
+
+static struct parport_driver i2c_parport_driver = {
+	.name = "i2c-parport",
+	.match_port = i2c_parport_attach,
+	.detach = i2c_parport_detach,
+	.devmodel = true,
+};
+
+/* ----- Module loading, unloading and information ------------------------ */
+
+static int __init i2c_parport_init(void)
+{
+	if (type < 0) {
+		pr_warn("adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
+		pr_warn("invalid type (%d)\n", type);
+		return -ENODEV;
+	}
+
+	return parport_register_driver(&i2c_parport_driver);
+}
+
+static void __exit i2c_parport_exit(void)
+{
+	parport_unregister_driver(&i2c_parport_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I2C bus over parallel port");
+MODULE_LICENSE("GPL");
+
+module_param_array(parport, int, NULL, 0);
+MODULE_PARM_DESC(parport,
+		 "List of parallel ports to bind to, by index.\n"
+		 " Atmost " __stringify(MAX_DEVICE) " devices are supported.\n"
+		 " Default is one device connected to parport0.\n"
+);
+
+module_init(i2c_parport_init);
+module_exit(i2c_parport_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.h
new file mode 100644
index 0000000..84a6616
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-parport.h
@@ -0,0 +1,114 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport.h I2C bus over parallel port                                 *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2010 Jean Delvare <jdelvare@suse.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ * ------------------------------------------------------------------------ */
+
+#define PORT_DATA	0
+#define PORT_STAT	1
+#define PORT_CTRL	2
+
+struct lineop {
+	u8 val;
+	u8 port;
+	u8 inverted;
+};
+
+struct adapter_parm {
+	struct lineop setsda;
+	struct lineop setscl;
+	struct lineop getsda;
+	struct lineop getscl;
+	struct lineop init;
+	unsigned int smbus_alert:1;
+};
+
+static const struct adapter_parm adapter_parm[] = {
+	/* type 0: Philips adapter */
+	{
+		.setsda	= { 0x80, PORT_DATA, 1 },
+		.setscl	= { 0x08, PORT_CTRL, 0 },
+		.getsda	= { 0x80, PORT_STAT, 0 },
+		.getscl	= { 0x08, PORT_STAT, 0 },
+	},
+	/* type 1: home brew teletext adapter */
+	{
+		.setsda	= { 0x02, PORT_DATA, 0 },
+		.setscl	= { 0x01, PORT_DATA, 0 },
+		.getsda	= { 0x80, PORT_STAT, 1 },
+	},
+	/* type 2: Velleman K8000 adapter */
+	{
+		.setsda	= { 0x02, PORT_CTRL, 1 },
+		.setscl	= { 0x08, PORT_CTRL, 1 },
+		.getsda	= { 0x10, PORT_STAT, 0 },
+	},
+	/* type 3: ELV adapter */
+	{
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x40, PORT_STAT, 1 },
+		.getscl	= { 0x08, PORT_STAT, 1 },
+	},
+	/* type 4: ADM1032 evaluation board */
+	{
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x10, PORT_STAT, 1 },
+		.init	= { 0xf0, PORT_DATA, 0 },
+		.smbus_alert = 1,
+	},
+	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
+	{
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x10, PORT_STAT, 1 },
+	},
+	/* type 6: Barco LPT->DVI (K5800236) adapter */
+	{
+		.setsda	= { 0x02, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x20, PORT_STAT, 0 },
+		.getscl	= { 0x40, PORT_STAT, 0 },
+		.init	= { 0xfc, PORT_DATA, 0 },
+	},
+	/* type 7: One For All JP1 parallel port adapter */
+	{
+		.setsda	= { 0x01, PORT_DATA, 0 },
+		.setscl	= { 0x02, PORT_DATA, 0 },
+		.getsda	= { 0x80, PORT_STAT, 1 },
+		.init	= { 0x04, PORT_DATA, 1 },
+	},
+	/* type 8: VCT-jig */
+	{
+		.setsda	= { 0x04, PORT_DATA, 1 },
+		.setscl	= { 0x01, PORT_DATA, 1 },
+		.getsda	= { 0x40, PORT_STAT, 0 },
+		.getscl	= { 0x80, PORT_STAT, 1 },
+	},
+};
+
+static int type = -1;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+	"Type of adapter:\n"
+	" 0 = Philips adapter\n"
+	" 1 = home brew teletext adapter\n"
+	" 2 = Velleman K8000 adapter\n"
+	" 3 = ELV adapter\n"
+	" 4 = ADM1032 evaluation board\n"
+	" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
+	" 6 = Barco LPT->DVI (K5800236) adapter\n"
+	" 7 = One For All JP1 parallel port adapter\n"
+	" 8 = VCT-jig\n"
+);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pasemi.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pasemi.c
new file mode 100644
index 0000000..df1dbc9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pasemi.c
@@ -0,0 +1,418 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * SMBus host driver for PA Semi PWRficient
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+static struct pci_driver pasemi_smb_driver;
+
+struct pasemi_smbus {
+	struct pci_dev		*dev;
+	struct i2c_adapter	 adapter;
+	unsigned long		 base;
+	int			 size;
+};
+
+/* Register offsets */
+#define REG_MTXFIFO	0x00
+#define REG_MRXFIFO	0x04
+#define REG_SMSTA	0x14
+#define REG_CTL		0x1c
+
+/* Register defs */
+#define MTXFIFO_READ	0x00000400
+#define MTXFIFO_STOP	0x00000200
+#define MTXFIFO_START	0x00000100
+#define MTXFIFO_DATA_M	0x000000ff
+
+#define MRXFIFO_EMPTY	0x00000100
+#define MRXFIFO_DATA_M	0x000000ff
+
+#define SMSTA_XEN	0x08000000
+#define SMSTA_MTN	0x00200000
+
+#define CTL_MRR		0x00000400
+#define CTL_MTR		0x00000200
+#define CTL_CLK_M	0x000000ff
+
+#define CLK_100K_DIV	84
+#define CLK_400K_DIV	21
+
+static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val)
+{
+	dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n",
+		smbus->base + reg, val);
+	outl(val, smbus->base + reg);
+}
+
+static inline int reg_read(struct pasemi_smbus *smbus, int reg)
+{
+	int ret;
+	ret = inl(smbus->base + reg);
+	dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n",
+		smbus->base + reg, ret);
+	return ret;
+}
+
+#define TXFIFO_WR(smbus, reg)	reg_write((smbus), REG_MTXFIFO, (reg))
+#define RXFIFO_RD(smbus)	reg_read((smbus), REG_MRXFIFO)
+
+static void pasemi_smb_clear(struct pasemi_smbus *smbus)
+{
+	unsigned int status;
+
+	status = reg_read(smbus, REG_SMSTA);
+	reg_write(smbus, REG_SMSTA, status);
+}
+
+static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
+{
+	int timeout = 10;
+	unsigned int status;
+
+	status = reg_read(smbus, REG_SMSTA);
+
+	while (!(status & SMSTA_XEN) && timeout--) {
+		msleep(1);
+		status = reg_read(smbus, REG_SMSTA);
+	}
+
+	/* Got NACK? */
+	if (status & SMSTA_MTN)
+		return -ENXIO;
+
+	if (timeout < 0) {
+		dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status);
+		reg_write(smbus, REG_SMSTA, status);
+		return -ETIME;
+	}
+
+	/* Clear XEN */
+	reg_write(smbus, REG_SMSTA, SMSTA_XEN);
+
+	return 0;
+}
+
+static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
+			       struct i2c_msg *msg, int stop)
+{
+	struct pasemi_smbus *smbus = adapter->algo_data;
+	int read, i, err;
+	u32 rd;
+
+	read = msg->flags & I2C_M_RD ? 1 : 0;
+
+	TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read);
+
+	if (read) {
+		TXFIFO_WR(smbus, msg->len | MTXFIFO_READ |
+				 (stop ? MTXFIFO_STOP : 0));
+
+		err = pasemi_smb_waitready(smbus);
+		if (err)
+			goto reset_out;
+
+		for (i = 0; i < msg->len; i++) {
+			rd = RXFIFO_RD(smbus);
+			if (rd & MRXFIFO_EMPTY) {
+				err = -ENODATA;
+				goto reset_out;
+			}
+			msg->buf[i] = rd & MRXFIFO_DATA_M;
+		}
+	} else {
+		for (i = 0; i < msg->len - 1; i++)
+			TXFIFO_WR(smbus, msg->buf[i]);
+
+		TXFIFO_WR(smbus, msg->buf[msg->len-1] |
+			  (stop ? MTXFIFO_STOP : 0));
+	}
+
+	return 0;
+
+ reset_out:
+	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
+		  (CLK_100K_DIV & CTL_CLK_M)));
+	return err;
+}
+
+static int pasemi_i2c_xfer(struct i2c_adapter *adapter,
+			   struct i2c_msg *msgs, int num)
+{
+	struct pasemi_smbus *smbus = adapter->algo_data;
+	int ret, i;
+
+	pasemi_smb_clear(smbus);
+
+	ret = 0;
+
+	for (i = 0; i < num && !ret; i++)
+		ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1)));
+
+	return ret ? ret : num;
+}
+
+static int pasemi_smb_xfer(struct i2c_adapter *adapter,
+		u16 addr, unsigned short flags, char read_write, u8 command,
+		int size, union i2c_smbus_data *data)
+{
+	struct pasemi_smbus *smbus = adapter->algo_data;
+	unsigned int rd;
+	int read_flag, err;
+	int len = 0, i;
+
+	/* All our ops take 8-bit shifted addresses */
+	addr <<= 1;
+	read_flag = read_write == I2C_SMBUS_READ;
+
+	pasemi_smb_clear(smbus);
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START |
+			  MTXFIFO_STOP);
+		break;
+	case I2C_SMBUS_BYTE:
+		TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START);
+		if (read_write)
+			TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ);
+		else
+			TXFIFO_WR(smbus, MTXFIFO_STOP | command);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		TXFIFO_WR(smbus, addr | MTXFIFO_START);
+		TXFIFO_WR(smbus, command);
+		if (read_write) {
+			TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
+			TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP);
+		} else {
+			TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte);
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		TXFIFO_WR(smbus, addr | MTXFIFO_START);
+		TXFIFO_WR(smbus, command);
+		if (read_write) {
+			TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
+			TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP);
+		} else {
+			TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
+			TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8));
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		TXFIFO_WR(smbus, addr | MTXFIFO_START);
+		TXFIFO_WR(smbus, command);
+		if (read_write) {
+			TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
+			TXFIFO_WR(smbus, 1 | MTXFIFO_READ);
+			rd = RXFIFO_RD(smbus);
+			len = min_t(u8, (rd & MRXFIFO_DATA_M),
+				    I2C_SMBUS_BLOCK_MAX);
+			TXFIFO_WR(smbus, len | MTXFIFO_READ |
+					 MTXFIFO_STOP);
+		} else {
+			len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX);
+			TXFIFO_WR(smbus, len);
+			for (i = 1; i < len; i++)
+				TXFIFO_WR(smbus, data->block[i]);
+			TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP);
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		read_write = I2C_SMBUS_READ;
+		TXFIFO_WR(smbus, addr | MTXFIFO_START);
+		TXFIFO_WR(smbus, command);
+		TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
+		TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M);
+		TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
+		TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ);
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1);
+		read_write = I2C_SMBUS_READ;
+		TXFIFO_WR(smbus, addr | MTXFIFO_START);
+		TXFIFO_WR(smbus, command);
+		TXFIFO_WR(smbus, len);
+		for (i = 1; i <= len; i++)
+			TXFIFO_WR(smbus, data->block[i]);
+		TXFIFO_WR(smbus, addr | I2C_SMBUS_READ);
+		TXFIFO_WR(smbus, MTXFIFO_READ | 1);
+		rd = RXFIFO_RD(smbus);
+		len = min_t(u8, (rd & MRXFIFO_DATA_M),
+			    I2C_SMBUS_BLOCK_MAX - len);
+		TXFIFO_WR(smbus, len | MTXFIFO_READ | MTXFIFO_STOP);
+		break;
+
+	default:
+		dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EINVAL;
+	}
+
+	err = pasemi_smb_waitready(smbus);
+	if (err)
+		goto reset_out;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		rd = RXFIFO_RD(smbus);
+		if (rd & MRXFIFO_EMPTY) {
+			err = -ENODATA;
+			goto reset_out;
+		}
+		data->byte = rd & MRXFIFO_DATA_M;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		rd = RXFIFO_RD(smbus);
+		if (rd & MRXFIFO_EMPTY) {
+			err = -ENODATA;
+			goto reset_out;
+		}
+		data->word = rd & MRXFIFO_DATA_M;
+		rd = RXFIFO_RD(smbus);
+		if (rd & MRXFIFO_EMPTY) {
+			err = -ENODATA;
+			goto reset_out;
+		}
+		data->word |= (rd & MRXFIFO_DATA_M) << 8;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		data->block[0] = len;
+		for (i = 1; i <= len; i ++) {
+			rd = RXFIFO_RD(smbus);
+			if (rd & MRXFIFO_EMPTY) {
+				err = -ENODATA;
+				goto reset_out;
+			}
+			data->block[i] = rd & MRXFIFO_DATA_M;
+		}
+		break;
+	}
+
+	return 0;
+
+ reset_out:
+	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
+		  (CLK_100K_DIV & CTL_CLK_M)));
+	return err;
+}
+
+static u32 pasemi_smb_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.master_xfer	= pasemi_i2c_xfer,
+	.smbus_xfer	= pasemi_smb_xfer,
+	.functionality	= pasemi_smb_func,
+};
+
+static int pasemi_smb_probe(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	struct pasemi_smbus *smbus;
+	int error;
+
+	if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
+		return -ENODEV;
+
+	smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL);
+	if (!smbus)
+		return -ENOMEM;
+
+	smbus->dev = dev;
+	smbus->base = pci_resource_start(dev, 0);
+	smbus->size = pci_resource_len(dev, 0);
+
+	if (!request_region(smbus->base, smbus->size,
+			    pasemi_smb_driver.name)) {
+		error = -EBUSY;
+		goto out_kfree;
+	}
+
+	smbus->adapter.owner = THIS_MODULE;
+	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
+		 "PA Semi SMBus adapter at 0x%lx", smbus->base);
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	smbus->adapter.algo = &smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+	smbus->adapter.nr = PCI_FUNC(dev->devfn);
+
+	/* set up the sysfs linkage to our parent device */
+	smbus->adapter.dev.parent = &dev->dev;
+
+	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
+		  (CLK_100K_DIV & CTL_CLK_M)));
+
+	error = i2c_add_numbered_adapter(&smbus->adapter);
+	if (error)
+		goto out_release_region;
+
+	pci_set_drvdata(dev, smbus);
+
+	return 0;
+
+ out_release_region:
+	release_region(smbus->base, smbus->size);
+ out_kfree:
+	kfree(smbus);
+	return error;
+}
+
+static void pasemi_smb_remove(struct pci_dev *dev)
+{
+	struct pasemi_smbus *smbus = pci_get_drvdata(dev);
+
+	i2c_del_adapter(&smbus->adapter);
+	release_region(smbus->base, smbus->size);
+	kfree(smbus);
+}
+
+static const struct pci_device_id pasemi_smb_ids[] = {
+	{ PCI_DEVICE(0x1959, 0xa003) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, pasemi_smb_ids);
+
+static struct pci_driver pasemi_smb_driver = {
+	.name		= "i2c-pasemi",
+	.id_table	= pasemi_smb_ids,
+	.probe		= pasemi_smb_probe,
+	.remove		= pasemi_smb_remove,
+};
+
+module_pci_driver(pasemi_smb_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-isa.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-isa.c
new file mode 100644
index 0000000..946ac64
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-isa.c
@@ -0,0 +1,212 @@
+/*
+ *  i2c-pca-isa.c driver for PCA9564 on ISA boards
+ *    Copyright (C) 2004 Arcom Control Systems
+ *    Copyright (C) 2008 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/isa.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pca.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#define DRIVER "i2c-pca-isa"
+#define IO_SIZE 4
+
+static unsigned long base;
+static int irq = -1;
+
+/* Data sheet recommends 59kHz for 100kHz operation due to variation
+ * in the actual clock rate */
+static int clock  = 59000;
+
+static struct i2c_adapter pca_isa_ops;
+static wait_queue_head_t pca_wait;
+
+static void pca_isa_writebyte(void *pd, int reg, int val)
+{
+#ifdef DEBUG_IO
+	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
+	printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
+	       base+reg, val);
+#endif
+	outb(val, base+reg);
+}
+
+static int pca_isa_readbyte(void *pd, int reg)
+{
+	int res = inb(base+reg);
+#ifdef DEBUG_IO
+	{
+		static char *names[] = { "STA", "DAT", "ADR", "CON" };
+		printk(KERN_DEBUG "*** read  %s => %#04x\n", names[reg], res);
+	}
+#endif
+	return res;
+}
+
+static int pca_isa_waitforcompletion(void *pd)
+{
+	unsigned long timeout;
+	long ret;
+
+	if (irq > -1) {
+		ret = wait_event_timeout(pca_wait,
+				pca_isa_readbyte(pd, I2C_PCA_CON)
+				& I2C_PCA_CON_SI, pca_isa_ops.timeout);
+	} else {
+		/* Do polling */
+		timeout = jiffies + pca_isa_ops.timeout;
+		do {
+			ret = time_before(jiffies, timeout);
+			if (pca_isa_readbyte(pd, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
+			udelay(100);
+		} while (ret);
+	}
+
+	return ret > 0;
+}
+
+static void pca_isa_resetchip(void *pd)
+{
+	/* apparently only an external reset will do it. not a lot can be done */
+	printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n");
+}
+
+static irqreturn_t pca_handler(int this_irq, void *dev_id) {
+	wake_up(&pca_wait);
+	return IRQ_HANDLED;
+}
+
+static struct i2c_algo_pca_data pca_isa_data = {
+	/* .data intentionally left NULL, not needed with ISA */
+	.write_byte		= pca_isa_writebyte,
+	.read_byte		= pca_isa_readbyte,
+	.wait_for_completion	= pca_isa_waitforcompletion,
+	.reset_chip		= pca_isa_resetchip,
+};
+
+static struct i2c_adapter pca_isa_ops = {
+	.owner          = THIS_MODULE,
+	.algo_data	= &pca_isa_data,
+	.name		= "PCA9564/PCA9665 ISA Adapter",
+	.timeout	= HZ,
+};
+
+static int pca_isa_match(struct device *dev, unsigned int id)
+{
+	int match = base != 0;
+
+	if (match) {
+		if (irq <= -1)
+			dev_warn(dev, "Using polling mode (specify irq)\n");
+	} else
+		dev_err(dev, "Please specify I/O base\n");
+
+	return match;
+}
+
+static int pca_isa_probe(struct device *dev, unsigned int id)
+{
+	init_waitqueue_head(&pca_wait);
+
+	dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
+
+#ifdef CONFIG_PPC
+	if (check_legacy_ioport(base)) {
+		dev_err(dev, "I/O address %#08lx is not available\n", base);
+		goto out;
+	}
+#endif
+
+	if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
+		dev_err(dev, "I/O address %#08lx is in use\n", base);
+		goto out;
+	}
+
+	if (irq > -1) {
+		if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
+			dev_err(dev, "Request irq%d failed\n", irq);
+			goto out_region;
+		}
+	}
+
+	pca_isa_data.i2c_clock = clock;
+	if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
+		dev_err(dev, "Failed to add i2c bus\n");
+		goto out_irq;
+	}
+
+	return 0;
+
+ out_irq:
+	if (irq > -1)
+		free_irq(irq, &pca_isa_ops);
+ out_region:
+	release_region(base, IO_SIZE);
+ out:
+	return -ENODEV;
+}
+
+static int pca_isa_remove(struct device *dev, unsigned int id)
+{
+	i2c_del_adapter(&pca_isa_ops);
+
+	if (irq > -1) {
+		disable_irq(irq);
+		free_irq(irq, &pca_isa_ops);
+	}
+	release_region(base, IO_SIZE);
+
+	return 0;
+}
+
+static struct isa_driver pca_isa_driver = {
+	.match		= pca_isa_match,
+	.probe		= pca_isa_probe,
+	.remove		= pca_isa_remove,
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRIVER,
+	}
+};
+
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
+MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
+MODULE_LICENSE("GPL");
+
+module_param_hw(base, ulong, ioport, 0);
+MODULE_PARM_DESC(base, "I/O base address");
+module_param_hw(irq, int, irq, 0);
+MODULE_PARM_DESC(irq, "IRQ");
+module_param(clock, int, 0);
+MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
+		"For PCA9564: 330000,288000,217000,146000,"
+		"88000,59000,44000,36000\n"
+		"\t\tFor PCA9665:\tStandard: 60300 - 100099\n"
+		"\t\t\t\tFast: 100100 - 400099\n"
+		"\t\t\t\tFast+: 400100 - 10000099\n"
+		"\t\t\t\tTurbo: Up to 1265800");
+module_isa_driver(pca_isa_driver, 1);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-platform.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-platform.c
new file mode 100644
index 0000000..853a2ab
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pca-platform.c
@@ -0,0 +1,277 @@
+/*
+ *  i2c_pca_platform.c
+ *
+ *  Platform driver for the PCA9564 I2C controller.
+ *
+ *  Copyright (C) 2008 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-algo-pca.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <asm/irq.h>
+
+struct i2c_pca_pf_data {
+	void __iomem			*reg_base;
+	int				irq;	/* if 0, use polling */
+	struct gpio_desc		*gpio;
+	wait_queue_head_t		wait;
+	struct i2c_adapter		adap;
+	struct i2c_algo_pca_data	algo_data;
+	unsigned long			io_base;
+	unsigned long			io_size;
+};
+
+/* Read/Write functions for different register alignments */
+
+static int i2c_pca_pf_readbyte8(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg);
+}
+
+static int i2c_pca_pf_readbyte16(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg * 2);
+}
+
+static int i2c_pca_pf_readbyte32(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg * 4);
+}
+
+static void i2c_pca_pf_writebyte8(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg);
+}
+
+static void i2c_pca_pf_writebyte16(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg * 2);
+}
+
+static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg * 4);
+}
+
+
+static int i2c_pca_pf_waitforcompletion(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	unsigned long timeout;
+	long ret;
+
+	if (i2c->irq) {
+		ret = wait_event_timeout(i2c->wait,
+			i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+			& I2C_PCA_CON_SI, i2c->adap.timeout);
+	} else {
+		/* Do polling */
+		timeout = jiffies + i2c->adap.timeout;
+		do {
+			ret = time_before(jiffies, timeout);
+			if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
+			udelay(100);
+		} while (ret);
+	}
+
+	return ret > 0;
+}
+
+static void i2c_pca_pf_dummyreset(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+
+	dev_warn(&i2c->adap.dev, "No reset-pin found. Chip may get stuck!\n");
+}
+
+static void i2c_pca_pf_resetchip(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+
+	gpiod_set_value(i2c->gpio, 1);
+	ndelay(100);
+	gpiod_set_value(i2c->gpio, 0);
+}
+
+static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id)
+{
+	struct i2c_pca_pf_data *i2c = dev_id;
+
+	if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
+		return IRQ_NONE;
+
+	wake_up(&i2c->wait);
+
+	return IRQ_HANDLED;
+}
+
+
+static int i2c_pca_pf_probe(struct platform_device *pdev)
+{
+	struct i2c_pca_pf_data *i2c;
+	struct resource *res;
+	struct i2c_pca9564_pf_platform_data *platform_data =
+				dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	int ret = 0;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	/* If irq is 0, we do polling. */
+	if (irq < 0)
+		irq = 0;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->reg_base))
+		return PTR_ERR(i2c->reg_base);
+
+
+	init_waitqueue_head(&i2c->wait);
+
+	i2c->io_base = res->start;
+	i2c->io_size = resource_size(res);
+	i2c->irq = irq;
+
+	i2c->adap.nr = pdev->id;
+	i2c->adap.owner = THIS_MODULE;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 "PCA9564/PCA9665 at 0x%08lx",
+		 (unsigned long) res->start);
+	i2c->adap.algo_data = &i2c->algo_data;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = np;
+
+	if (platform_data) {
+		i2c->adap.timeout = platform_data->timeout;
+		i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+		if (gpio_is_valid(platform_data->gpio)) {
+			ret = devm_gpio_request_one(&pdev->dev,
+						    platform_data->gpio,
+						    GPIOF_ACTIVE_LOW,
+						    i2c->adap.name);
+			if (ret == 0) {
+				i2c->gpio = gpio_to_desc(platform_data->gpio);
+				gpiod_direction_output(i2c->gpio, 0);
+			} else {
+				dev_warn(&pdev->dev, "Registering gpio failed!\n");
+				i2c->gpio = NULL;
+			}
+		}
+	} else if (np) {
+		i2c->adap.timeout = HZ;
+		i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
+		if (IS_ERR(i2c->gpio))
+			return PTR_ERR(i2c->gpio);
+		of_property_read_u32_index(np, "clock-frequency", 0,
+					   &i2c->algo_data.i2c_clock);
+	} else {
+		i2c->adap.timeout = HZ;
+		i2c->algo_data.i2c_clock = 59000;
+		i2c->gpio = NULL;
+	}
+
+	i2c->algo_data.data = i2c;
+	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
+	if (i2c->gpio)
+		i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
+	else
+		i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
+
+	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+	case IORESOURCE_MEM_32BIT:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte32;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte32;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte16;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte16;
+		break;
+	case IORESOURCE_MEM_8BIT:
+	default:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte8;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte8;
+		break;
+	}
+
+	if (irq) {
+		ret = devm_request_irq(&pdev->dev, irq, i2c_pca_pf_handler,
+			IRQF_TRIGGER_FALLING, pdev->name, i2c);
+		if (ret)
+			return ret;
+	}
+
+	ret = i2c_pca_add_numbered_bus(&i2c->adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, i2c);
+
+	dev_info(&pdev->dev, "registered.\n");
+
+	return 0;
+}
+
+static int i2c_pca_pf_remove(struct platform_device *pdev)
+{
+	struct i2c_pca_pf_data *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pca_of_match_table[] = {
+	{ .compatible = "nxp,pca9564" },
+	{ .compatible = "nxp,pca9665" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_pca_of_match_table);
+#endif
+
+static struct platform_driver i2c_pca_pf_driver = {
+	.probe = i2c_pca_pf_probe,
+	.remove = i2c_pca_pf_remove,
+	.driver = {
+		.name = "i2c-pca-platform",
+		.of_match_table = of_match_ptr(i2c_pca_of_match_table),
+	},
+};
+
+module_platform_driver(i2c_pca_pf_driver);
+
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("I2C-PCA9564/PCA9665 platform driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-piix4.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-piix4.c
new file mode 100644
index 0000000..5345b73
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-piix4.c
@@ -0,0 +1,1024 @@
+/*
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+   Supports:
+	Intel PIIX4, 440MX
+	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
+	ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
+	AMD Hudson-2, ML, CZ
+	SMSC Victory66
+
+   Note: we assume there can only be one device, with one or more
+   SMBus interfaces.
+   The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS).
+   For devices supporting multiple ports the i2c_adapter should provide
+   an i2c_algorithm to access them.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS	(0 + piix4_smba)
+#define SMBHSLVSTS	(1 + piix4_smba)
+#define SMBHSTCNT	(2 + piix4_smba)
+#define SMBHSTCMD	(3 + piix4_smba)
+#define SMBHSTADD	(4 + piix4_smba)
+#define SMBHSTDAT0	(5 + piix4_smba)
+#define SMBHSTDAT1	(6 + piix4_smba)
+#define SMBBLKDAT	(7 + piix4_smba)
+#define SMBSLVCNT	(8 + piix4_smba)
+#define SMBSHDWCMD	(9 + piix4_smba)
+#define SMBSLVEVT	(0xA + piix4_smba)
+#define SMBSLVDAT	(0xC + piix4_smba)
+
+/* count for request_region */
+#define SMBIOSIZE	9
+
+/* PCI Address Constants */
+#define SMBBA		0x090
+#define SMBHSTCFG	0x0D2
+#define SMBSLVC		0x0D3
+#define SMBSHDW1	0x0D4
+#define SMBSHDW2	0x0D5
+#define SMBREV		0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+#define  ENABLE_INT9	0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK		0x00
+#define PIIX4_BYTE		0x04
+#define PIIX4_BYTE_DATA		0x08
+#define PIIX4_WORD_DATA		0x0C
+#define PIIX4_BLOCK_DATA	0x14
+
+/* Multi-port constants */
+#define PIIX4_MAX_ADAPTERS 4
+
+/* SB800 constants */
+#define SB800_PIIX4_SMB_IDX		0xcd6
+
+#define KERNCZ_IMC_IDX			0x3e
+#define KERNCZ_IMC_DATA			0x3f
+
+/*
+ * SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
+ * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
+ * Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f.
+ */
+#define SB800_PIIX4_PORT_IDX		0x2c
+#define SB800_PIIX4_PORT_IDX_ALT	0x2e
+#define SB800_PIIX4_PORT_IDX_SEL	0x2f
+#define SB800_PIIX4_PORT_IDX_MASK	0x06
+#define SB800_PIIX4_PORT_IDX_SHIFT	1
+
+/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
+#define SB800_PIIX4_PORT_IDX_KERNCZ		0x02
+#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
+#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+   PIIX4. DANGEROUS! */
+static int force;
+module_param (force, int, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr;
+module_param_hw(force_addr, int, ioport, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the PIIX4 at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+static int srvrworks_csb5_delay;
+static struct pci_driver piix4_driver;
+
+static const struct dmi_system_id piix4_dmi_blacklist[] = {
+	{
+		.ident = "Sapphire AM2RD790",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
+		},
+	},
+	{
+		.ident = "DFI Lanparty UT 790FX",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
+		},
+	},
+	{ }
+};
+
+/* The IBM entry is in a separate table because we only check it
+   on Intel-based systems */
+static const struct dmi_system_id piix4_dmi_ibm[] = {
+	{
+		.ident = "IBM",
+		.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+	},
+	{ },
+};
+
+/*
+ * SB800 globals
+ * piix4_mutex_sb800 protects piix4_port_sel_sb800 and the pair
+ * of I/O ports at SB800_PIIX4_SMB_IDX.
+ */
+static DEFINE_MUTEX(piix4_mutex_sb800);
+static u8 piix4_port_sel_sb800;
+static u8 piix4_port_mask_sb800;
+static u8 piix4_port_shift_sb800;
+static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
+	" port 0", " port 2", " port 3", " port 4"
+};
+static const char *piix4_aux_port_name_sb800 = " port 1";
+
+struct i2c_piix4_adapdata {
+	unsigned short smba;
+
+	/* SB800 */
+	bool sb800_main;
+	bool notify_imc;
+	u8 port;		/* Port number, shifted */
+};
+
+static int piix4_setup(struct pci_dev *PIIX4_dev,
+		       const struct pci_device_id *id)
+{
+	unsigned char temp;
+	unsigned short piix4_smba;
+
+	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
+	    (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
+		srvrworks_csb5_delay = 1;
+
+	/* On some motherboards, it was reported that accessing the SMBus
+	   caused severe hardware problems */
+	if (dmi_check_system(piix4_dmi_blacklist)) {
+		dev_err(&PIIX4_dev->dev,
+			"Accessing the SMBus on this system is unsafe!\n");
+		return -EPERM;
+	}
+
+	/* Don't access SMBus on IBM systems which get corrupted eeproms */
+	if (dmi_check_system(piix4_dmi_ibm) &&
+			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
+		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
+			"may corrupt your serial eeprom! Refusing to load "
+			"module!\n");
+		return -EPERM;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		piix4_smba = force_addr & 0xfff0;
+		force = 0;
+	} else {
+		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+		piix4_smba &= 0xfff0;
+		if(piix4_smba == 0) {
+			dev_err(&PIIX4_dev->dev, "SMBus base address "
+				"uninitialized - upgrade BIOS or use "
+				"force_addr=0xaddr\n");
+			return -ENODEV;
+		}
+	}
+
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -ENODEV;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+			piix4_smba);
+		return -EBUSY;
+	}
+
+	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the PIIX4 first. */
+	if (force_addr) {
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+		dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
+			"new address %04x!\n", piix4_smba);
+	} else if ((temp & 1) == 0) {
+		if (force) {
+			/* This should never need to be done, but has been
+			 * noted that many Dell machines have the SMBus
+			 * interface on the PIIX4 disabled!? NOTE: This assumes
+			 * I/O space and other allocations WERE done by the
+			 * Bios!  Don't complain if your hardware does weird
+			 * things after enabling this. :') Check for Bios
+			 * updates before resorting to this.
+			 */
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+					      temp | 1);
+			dev_notice(&PIIX4_dev->dev,
+				   "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
+		} else {
+			dev_err(&PIIX4_dev->dev,
+				"SMBus Host Controller not enabled!\n");
+			release_region(piix4_smba, SMBIOSIZE);
+			return -ENODEV;
+		}
+	}
+
+	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
+		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
+	else if ((temp & 0x0E) == 0)
+		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
+	else
+		dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
+			"(or code out of date)!\n");
+
+	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, temp);
+
+	return piix4_smba;
+}
+
+static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
+			     const struct pci_device_id *id, u8 aux)
+{
+	unsigned short piix4_smba;
+	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
+	u8 i2ccfg, i2ccfg_offset = 0x10;
+
+	/* SB800 and later SMBus does not support forcing address */
+	if (force || force_addr) {
+		dev_err(&PIIX4_dev->dev, "SMBus does not support "
+			"forcing address!\n");
+		return -EINVAL;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     PIIX4_dev->revision >= 0x41) ||
+	    (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+	     PIIX4_dev->revision >= 0x49))
+		smb_en = 0x00;
+	else
+		smb_en = (aux) ? 0x28 : 0x2c;
+
+	mutex_lock(&piix4_mutex_sb800);
+	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	mutex_unlock(&piix4_mutex_sb800);
+
+	if (!smb_en) {
+		smb_en_status = smba_en_lo & 0x10;
+		piix4_smba = smba_en_hi << 8;
+		if (aux)
+			piix4_smba |= 0x20;
+	} else {
+		smb_en_status = smba_en_lo & 0x01;
+		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!smb_en_status) {
+		dev_err(&PIIX4_dev->dev,
+			"SMBus Host Controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -ENODEV;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+			piix4_smba);
+		return -EBUSY;
+	}
+
+	/* Aux SMBus does not support IRQ information */
+	if (aux) {
+		dev_info(&PIIX4_dev->dev,
+			 "Auxiliary SMBus Host Controller at 0x%x\n",
+			 piix4_smba);
+		return piix4_smba;
+	}
+
+	/* Request the SMBus I2C bus config region */
+	if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
+		dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
+			"0x%x already in use!\n", piix4_smba + i2ccfg_offset);
+		release_region(piix4_smba, SMBIOSIZE);
+		return -EBUSY;
+	}
+	i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
+	release_region(piix4_smba + i2ccfg_offset, 1);
+
+	if (i2ccfg & 1)
+		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
+	else
+		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
+
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, i2ccfg >> 4);
+
+	/* Find which register is used for port selection */
+	if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
+		if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS ||
+		    (PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+		     PIIX4_dev->revision >= 0x1F)) {
+			piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
+			piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
+			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
+		} else {
+			piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+			piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
+		}
+	} else {
+		mutex_lock(&piix4_mutex_sb800);
+		outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
+		port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1);
+		piix4_port_sel_sb800 = (port_sel & 0x01) ?
+				       SB800_PIIX4_PORT_IDX_ALT :
+				       SB800_PIIX4_PORT_IDX;
+		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
+		mutex_unlock(&piix4_mutex_sb800);
+	}
+
+	dev_info(&PIIX4_dev->dev,
+		 "Using register 0x%02x for SMBus port selection\n",
+		 (unsigned int)piix4_port_sel_sb800);
+
+	return piix4_smba;
+}
+
+static int piix4_setup_aux(struct pci_dev *PIIX4_dev,
+			   const struct pci_device_id *id,
+			   unsigned short base_reg_addr)
+{
+	/* Set up auxiliary SMBus controllers found on some
+	 * AMD chipsets e.g. SP5100 (SB700 derivative) */
+
+	unsigned short piix4_smba;
+
+	/* Read address of auxiliary SMBus controller */
+	pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba);
+	if ((piix4_smba & 1) == 0) {
+		dev_dbg(&PIIX4_dev->dev,
+			"Auxiliary SMBus controller not enabled\n");
+		return -ENODEV;
+	}
+
+	piix4_smba &= 0xfff0;
+	if (piix4_smba == 0) {
+		dev_dbg(&PIIX4_dev->dev,
+			"Auxiliary SMBus base address uninitialized\n");
+		return -ENODEV;
+	}
+
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -ENODEV;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x "
+			"already in use!\n", piix4_smba);
+		return -EBUSY;
+	}
+
+	dev_info(&PIIX4_dev->dev,
+		 "Auxiliary SMBus Host Controller at 0x%x\n",
+		 piix4_smba);
+
+	return piix4_smba;
+}
+
+static int piix4_transaction(struct i2c_adapter *piix4_adapter)
+{
+	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter);
+	unsigned short piix4_smba = adapdata->smba;
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). "
+			"Resetting...\n", temp);
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+			dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&piix4_adapter->dev, "Successful!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 6 */
+	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+	if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
+		msleep(2);
+	else
+		msleep(1);
+
+	while ((++timeout < MAX_TIMEOUT) &&
+	       ((temp = inb_p(SMBHSTSTS)) & 0x01))
+		msleep(1);
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout == MAX_TIMEOUT) {
+		dev_err(&piix4_adapter->dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+
+	if (temp & 0x10) {
+		result = -EIO;
+		dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n");
+	}
+
+	if (temp & 0x08) {
+		result = -EIO;
+		dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be "
+			"locked until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -ENXIO;
+		dev_dbg(&piix4_adapter->dev, "Error: no response!\n");
+	}
+
+	if (inb_p(SMBHSTSTS) != 0x00)
+		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_err(&piix4_adapter->dev, "Failed reset at end of "
+			"transaction (%02x)\n", temp);
+	}
+	dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data * data)
+{
+	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
+	unsigned short piix4_smba = adapdata->smba;
+	int i, len;
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		size = PIIX4_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = PIIX4_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = PIIX4_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = PIIX4_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			outb_p(len, SMBHSTDAT0);
+			inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = PIIX4_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+	status = piix4_transaction(adap);
+	if (status)
+		return status;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case PIIX4_BYTE:
+	case PIIX4_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case PIIX4_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+}
+
+static uint8_t piix4_imc_read(uint8_t idx)
+{
+	outb_p(idx, KERNCZ_IMC_IDX);
+	return inb_p(KERNCZ_IMC_DATA);
+}
+
+static void piix4_imc_write(uint8_t idx, uint8_t value)
+{
+	outb_p(idx, KERNCZ_IMC_IDX);
+	outb_p(value, KERNCZ_IMC_DATA);
+}
+
+static int piix4_imc_sleep(void)
+{
+	int timeout = MAX_TIMEOUT;
+
+	if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+		return -EBUSY;
+
+	/* clear response register */
+	piix4_imc_write(0x82, 0x00);
+	/* request ownership flag */
+	piix4_imc_write(0x83, 0xB4);
+	/* kick off IMC Mailbox command 96 */
+	piix4_imc_write(0x80, 0x96);
+
+	while (timeout--) {
+		if (piix4_imc_read(0x82) == 0xfa) {
+			release_region(KERNCZ_IMC_IDX, 2);
+			return 0;
+		}
+		usleep_range(1000, 2000);
+	}
+
+	release_region(KERNCZ_IMC_IDX, 2);
+	return -ETIMEDOUT;
+}
+
+static void piix4_imc_wakeup(void)
+{
+	int timeout = MAX_TIMEOUT;
+
+	if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+		return;
+
+	/* clear response register */
+	piix4_imc_write(0x82, 0x00);
+	/* release ownership flag */
+	piix4_imc_write(0x83, 0xB5);
+	/* kick off IMC Mailbox command 96 */
+	piix4_imc_write(0x80, 0x96);
+
+	while (timeout--) {
+		if (piix4_imc_read(0x82) == 0xfa)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	release_region(KERNCZ_IMC_IDX, 2);
+}
+
+/*
+ * Handles access to multiple SMBus ports on the SB800.
+ * The port is selected by bits 2:1 of the smb_en register (0x2c).
+ * Returns negative errno on error.
+ *
+ * Note: The selected port must be returned to the initial selection to avoid
+ * problems on certain systems.
+ */
+static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data *data)
+{
+	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
+	unsigned short piix4_smba = adapdata->smba;
+	int retries = MAX_TIMEOUT;
+	int smbslvcnt;
+	u8 smba_en_lo;
+	u8 port;
+	int retval;
+
+	mutex_lock(&piix4_mutex_sb800);
+
+	/* Request the SMBUS semaphore, avoid conflicts with the IMC */
+	smbslvcnt  = inb_p(SMBSLVCNT);
+	do {
+		outb_p(smbslvcnt | 0x10, SMBSLVCNT);
+
+		/* Check the semaphore status */
+		smbslvcnt  = inb_p(SMBSLVCNT);
+		if (smbslvcnt & 0x10)
+			break;
+
+		usleep_range(1000, 2000);
+	} while (--retries);
+	/* SMBus is still owned by the IMC, we give up */
+	if (!retries) {
+		mutex_unlock(&piix4_mutex_sb800);
+		return -EBUSY;
+	}
+
+	/*
+	 * Notify the IMC (Integrated Micro Controller) if required.
+	 * Among other responsibilities, the IMC is in charge of monitoring
+	 * the System fans and temperature sensors, and act accordingly.
+	 * All this is done through SMBus and can/will collide
+	 * with our transactions if they are long (BLOCK_DATA).
+	 * Therefore we need to request the ownership flag during those
+	 * transactions.
+	 */
+	if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) {
+		int ret;
+
+		ret = piix4_imc_sleep();
+		switch (ret) {
+		case -EBUSY:
+			dev_warn(&adap->dev,
+				 "IMC base address index region 0x%x already in use.\n",
+				 KERNCZ_IMC_IDX);
+			break;
+		case -ETIMEDOUT:
+			dev_warn(&adap->dev,
+				 "Failed to communicate with the IMC.\n");
+			break;
+		default:
+			break;
+		}
+
+		/* If IMC communication fails do not retry */
+		if (ret) {
+			dev_warn(&adap->dev,
+				 "Continuing without IMC notification.\n");
+			adapdata->notify_imc = false;
+		}
+	}
+
+	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+	port = adapdata->port;
+	if ((smba_en_lo & piix4_port_mask_sb800) != port)
+		outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
+		       SB800_PIIX4_SMB_IDX + 1);
+
+	retval = piix4_access(adap, addr, flags, read_write,
+			      command, size, data);
+
+	outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);
+
+	/* Release the semaphore */
+	outb_p(smbslvcnt | 0x20, SMBSLVCNT);
+
+	if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc)
+		piix4_imc_wakeup();
+
+	mutex_unlock(&piix4_mutex_sb800);
+
+	return retval;
+}
+
+static u32 piix4_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= piix4_access,
+	.functionality	= piix4_func,
+};
+
+static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = {
+	.smbus_xfer	= piix4_access_sb800,
+	.functionality	= piix4_func,
+};
+
+static const struct pci_device_id piix4_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_CSB5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_CSB6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, piix4_ids);
+
+static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
+static struct i2c_adapter *piix4_aux_adapter;
+
+static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
+			     bool sb800_main, u8 port, bool notify_imc,
+			     const char *name, struct i2c_adapter **padap)
+{
+	struct i2c_adapter *adap;
+	struct i2c_piix4_adapdata *adapdata;
+	int retval;
+
+	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+	if (adap == NULL) {
+		release_region(smba, SMBIOSIZE);
+		return -ENOMEM;
+	}
+
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->algo = sb800_main ? &piix4_smbus_algorithm_sb800
+				: &smbus_algorithm;
+
+	adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL);
+	if (adapdata == NULL) {
+		kfree(adap);
+		release_region(smba, SMBIOSIZE);
+		return -ENOMEM;
+	}
+
+	adapdata->smba = smba;
+	adapdata->sb800_main = sb800_main;
+	adapdata->port = port << piix4_port_shift_sb800;
+	adapdata->notify_imc = notify_imc;
+
+	/* set up the sysfs linkage to our parent device */
+	adap->dev.parent = &dev->dev;
+
+	snprintf(adap->name, sizeof(adap->name),
+		"SMBus PIIX4 adapter%s at %04x", name, smba);
+
+	i2c_set_adapdata(adap, adapdata);
+
+	retval = i2c_add_adapter(adap);
+	if (retval) {
+		kfree(adapdata);
+		kfree(adap);
+		release_region(smba, SMBIOSIZE);
+		return retval;
+	}
+
+	*padap = adap;
+	return 0;
+}
+
+static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
+				    bool notify_imc)
+{
+	struct i2c_piix4_adapdata *adapdata;
+	int port;
+	int retval;
+
+	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+		retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
+					   piix4_main_port_names_sb800[port],
+					   &piix4_main_adapters[port]);
+		if (retval < 0)
+			goto error;
+	}
+
+	return retval;
+
+error:
+	dev_err(&dev->dev,
+		"Error setting up SB800 adapters. Unregistering!\n");
+	while (--port >= 0) {
+		adapdata = i2c_get_adapdata(piix4_main_adapters[port]);
+		if (adapdata->smba) {
+			i2c_del_adapter(piix4_main_adapters[port]);
+			kfree(adapdata);
+			kfree(piix4_main_adapters[port]);
+			piix4_main_adapters[port] = NULL;
+		}
+	}
+
+	return retval;
+}
+
+static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+	bool is_sb800 = false;
+
+	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
+	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	     dev->revision >= 0x40) ||
+	    dev->vendor == PCI_VENDOR_ID_AMD) {
+		bool notify_imc = false;
+		is_sb800 = true;
+
+		if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {
+			dev_err(&dev->dev,
+			"SMBus base address index region 0x%x already in use!\n",
+			SB800_PIIX4_SMB_IDX);
+			return -EBUSY;
+		}
+
+		if (dev->vendor == PCI_VENDOR_ID_AMD &&
+		    dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
+			u8 imc;
+
+			/*
+			 * Detect if IMC is active or not, this method is
+			 * described on coreboot's AMD IMC notes
+			 */
+			pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3),
+						 0x40, &imc);
+			if (imc & 0x80)
+				notify_imc = true;
+		}
+
+		/* base address location etc changed in SB800 */
+		retval = piix4_setup_sb800(dev, id, 0);
+		if (retval < 0) {
+			release_region(SB800_PIIX4_SMB_IDX, 2);
+			return retval;
+		}
+
+		/*
+		 * Try to register multiplexed main SMBus adapter,
+		 * give up if we can't
+		 */
+		retval = piix4_add_adapters_sb800(dev, retval, notify_imc);
+		if (retval < 0) {
+			release_region(SB800_PIIX4_SMB_IDX, 2);
+			return retval;
+		}
+	} else {
+		retval = piix4_setup(dev, id);
+		if (retval < 0)
+			return retval;
+
+		/* Try to register main SMBus adapter, give up if we can't */
+		retval = piix4_add_adapter(dev, retval, false, 0, false, "",
+					   &piix4_main_adapters[0]);
+		if (retval < 0)
+			return retval;
+	}
+
+	/* Check for auxiliary SMBus on some AMD chipsets */
+	retval = -ENODEV;
+
+	if (dev->vendor == PCI_VENDOR_ID_ATI &&
+	    dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
+		if (dev->revision < 0x40) {
+			retval = piix4_setup_aux(dev, id, 0x58);
+		} else {
+			/* SB800 added aux bus too */
+			retval = piix4_setup_sb800(dev, id, 1);
+		}
+	}
+
+	if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ||
+	     dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) {
+		retval = piix4_setup_sb800(dev, id, 1);
+	}
+
+	if (retval > 0) {
+		/* Try to add the aux adapter if it exists,
+		 * piix4_add_adapter will clean up if this fails */
+		piix4_add_adapter(dev, retval, false, 0, false,
+				  is_sb800 ? piix4_aux_port_name_sb800 : "",
+				  &piix4_aux_adapter);
+	}
+
+	return 0;
+}
+
+static void piix4_adap_remove(struct i2c_adapter *adap)
+{
+	struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
+
+	if (adapdata->smba) {
+		i2c_del_adapter(adap);
+		if (adapdata->port == (0 << 1)) {
+			release_region(adapdata->smba, SMBIOSIZE);
+			if (adapdata->sb800_main)
+				release_region(SB800_PIIX4_SMB_IDX, 2);
+		}
+		kfree(adapdata);
+		kfree(adap);
+	}
+}
+
+static void piix4_remove(struct pci_dev *dev)
+{
+	int port = PIIX4_MAX_ADAPTERS;
+
+	while (--port >= 0) {
+		if (piix4_main_adapters[port]) {
+			piix4_adap_remove(piix4_main_adapters[port]);
+			piix4_main_adapters[port] = NULL;
+		}
+	}
+
+	if (piix4_aux_adapter) {
+		piix4_adap_remove(piix4_aux_adapter);
+		piix4_aux_adapter = NULL;
+	}
+}
+
+static struct pci_driver piix4_driver = {
+	.name		= "piix4_smbus",
+	.id_table	= piix4_ids,
+	.probe		= piix4_probe,
+	.remove		= piix4_remove,
+};
+
+module_pci_driver(piix4_driver);
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pmcmsp.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pmcmsp.c
new file mode 100644
index 0000000..dae8ac6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pmcmsp.c
@@ -0,0 +1,615 @@
+/*
+ * Specific bus support for PMC-TWI compliant implementation on MSP71xx.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define DRV_NAME	"pmcmsptwi"
+
+#define MSP_TWI_SF_CLK_REG_OFFSET	0x00
+#define MSP_TWI_HS_CLK_REG_OFFSET	0x04
+#define MSP_TWI_CFG_REG_OFFSET		0x08
+#define MSP_TWI_CMD_REG_OFFSET		0x0c
+#define MSP_TWI_ADD_REG_OFFSET		0x10
+#define MSP_TWI_DAT_0_REG_OFFSET	0x14
+#define MSP_TWI_DAT_1_REG_OFFSET	0x18
+#define MSP_TWI_INT_STS_REG_OFFSET	0x1c
+#define MSP_TWI_INT_MSK_REG_OFFSET	0x20
+#define MSP_TWI_BUSY_REG_OFFSET		0x24
+
+#define MSP_TWI_INT_STS_DONE			(1 << 0)
+#define MSP_TWI_INT_STS_LOST_ARBITRATION	(1 << 1)
+#define MSP_TWI_INT_STS_NO_RESPONSE		(1 << 2)
+#define MSP_TWI_INT_STS_DATA_COLLISION		(1 << 3)
+#define MSP_TWI_INT_STS_BUSY			(1 << 4)
+#define MSP_TWI_INT_STS_ALL			0x1f
+
+#define MSP_MAX_BYTES_PER_RW		8
+#define MSP_MAX_POLL			5
+#define MSP_POLL_DELAY			10
+#define MSP_IRQ_TIMEOUT			(MSP_MAX_POLL * MSP_POLL_DELAY)
+
+/* IO Operation macros */
+#define pmcmsptwi_readl		__raw_readl
+#define pmcmsptwi_writel	__raw_writel
+
+/* TWI command type */
+enum pmcmsptwi_cmd_type {
+	MSP_TWI_CMD_WRITE	= 0,	/* Write only */
+	MSP_TWI_CMD_READ	= 1,	/* Read only */
+	MSP_TWI_CMD_WRITE_READ	= 2,	/* Write then Read */
+};
+
+/* The possible results of the xferCmd */
+enum pmcmsptwi_xfer_result {
+	MSP_TWI_XFER_OK	= 0,
+	MSP_TWI_XFER_TIMEOUT,
+	MSP_TWI_XFER_BUSY,
+	MSP_TWI_XFER_DATA_COLLISION,
+	MSP_TWI_XFER_NO_RESPONSE,
+	MSP_TWI_XFER_LOST_ARBITRATION,
+};
+
+/* Corresponds to a PMCTWI clock configuration register */
+struct pmcmsptwi_clock {
+	u8 filter;	/* Bits 15:12,	default = 0x03 */
+	u16 clock;	/* Bits 9:0,	default = 0x001f */
+};
+
+struct pmcmsptwi_clockcfg {
+	struct pmcmsptwi_clock standard;  /* The standard/fast clock config */
+	struct pmcmsptwi_clock highspeed; /* The highspeed clock config */
+};
+
+/* Corresponds to the main TWI configuration register */
+struct pmcmsptwi_cfg {
+	u8 arbf;	/* Bits 15:12,	default=0x03 */
+	u8 nak;		/* Bits 11:8,	default=0x03 */
+	u8 add10;	/* Bit 7,	default=0x00 */
+	u8 mst_code;	/* Bits 6:4,	default=0x00 */
+	u8 arb;		/* Bit 1,	default=0x01 */
+	u8 highspeed;	/* Bit 0,	default=0x00 */
+};
+
+/* A single pmctwi command to issue */
+struct pmcmsptwi_cmd {
+	u16 addr;	/* The slave address (7 or 10 bits) */
+	enum pmcmsptwi_cmd_type type;	/* The command type */
+	u8 write_len;	/* Number of bytes in the write buffer */
+	u8 read_len;	/* Number of bytes in the read buffer */
+	u8 *write_data;	/* Buffer of characters to send */
+	u8 *read_data;	/* Buffer to fill with incoming data */
+};
+
+/* The private data */
+struct pmcmsptwi_data {
+	void __iomem *iobase;			/* iomapped base for IO */
+	int irq;				/* IRQ to use (0 disables) */
+	struct completion wait;			/* Completion for xfer */
+	struct mutex lock;			/* Used for threadsafeness */
+	enum pmcmsptwi_xfer_result last_result;	/* result of last xfer */
+};
+
+/* The default settings */
+static const struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+	.standard = {
+		.filter	= 0x3,
+		.clock	= 0x1f,
+	},
+	.highspeed = {
+		.filter	= 0x3,
+		.clock	= 0x1f,
+	},
+};
+
+static const struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+	.arbf		= 0x03,
+	.nak		= 0x03,
+	.add10		= 0x00,
+	.mst_code	= 0x00,
+	.arb		= 0x01,
+	.highspeed	= 0x00,
+};
+
+static struct pmcmsptwi_data pmcmsptwi_data;
+
+static struct i2c_adapter pmcmsptwi_adapter;
+
+/* inline helper functions */
+static inline u32 pmcmsptwi_clock_to_reg(
+			const struct pmcmsptwi_clock *clock)
+{
+	return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff);
+}
+
+static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg)
+{
+	return ((cfg->arbf & 0xf) << 12) |
+		((cfg->nak & 0xf) << 8) |
+		((cfg->add10 & 0x1) << 7) |
+		((cfg->mst_code & 0x7) << 4) |
+		((cfg->arb & 0x1) << 1) |
+		(cfg->highspeed & 0x1);
+}
+
+static inline void pmcmsptwi_reg_to_cfg(u32 reg, struct pmcmsptwi_cfg *cfg)
+{
+	cfg->arbf = (reg >> 12) & 0xf;
+	cfg->nak = (reg >> 8) & 0xf;
+	cfg->add10 = (reg >> 7) & 0x1;
+	cfg->mst_code = (reg >> 4) & 0x7;
+	cfg->arb = (reg >> 1) & 0x1;
+	cfg->highspeed = reg & 0x1;
+}
+
+/*
+ * Sets the current clock configuration
+ */
+static void pmcmsptwi_set_clock_config(const struct pmcmsptwi_clockcfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->standard),
+				data->iobase + MSP_TWI_SF_CLK_REG_OFFSET);
+	pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->highspeed),
+				data->iobase + MSP_TWI_HS_CLK_REG_OFFSET);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Gets the current TWI bus configuration
+ */
+static void pmcmsptwi_get_twi_config(struct pmcmsptwi_cfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_reg_to_cfg(pmcmsptwi_readl(
+				data->iobase + MSP_TWI_CFG_REG_OFFSET), cfg);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Sets the current TWI bus configuration
+ */
+static void pmcmsptwi_set_twi_config(const struct pmcmsptwi_cfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_writel(pmcmsptwi_cfg_to_reg(cfg),
+				data->iobase + MSP_TWI_CFG_REG_OFFSET);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Parses the 'int_sts' register and returns a well-defined error code
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_get_result(u32 reg)
+{
+	if (reg & MSP_TWI_INT_STS_LOST_ARBITRATION) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Lost arbitration\n");
+		return MSP_TWI_XFER_LOST_ARBITRATION;
+	} else if (reg & MSP_TWI_INT_STS_NO_RESPONSE) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: No response\n");
+		return MSP_TWI_XFER_NO_RESPONSE;
+	} else if (reg & MSP_TWI_INT_STS_DATA_COLLISION) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Data collision\n");
+		return MSP_TWI_XFER_DATA_COLLISION;
+	} else if (reg & MSP_TWI_INT_STS_BUSY) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Bus busy\n");
+		return MSP_TWI_XFER_BUSY;
+	}
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Result: Operation succeeded\n");
+	return MSP_TWI_XFER_OK;
+}
+
+/*
+ * In interrupt mode, handle the interrupt.
+ * NOTE: Assumes data->lock is held.
+ */
+static irqreturn_t pmcmsptwi_interrupt(int irq, void *ptr)
+{
+	struct pmcmsptwi_data *data = ptr;
+
+	u32 reason = pmcmsptwi_readl(data->iobase +
+					MSP_TWI_INT_STS_REG_OFFSET);
+	pmcmsptwi_writel(reason, data->iobase + MSP_TWI_INT_STS_REG_OFFSET);
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Got interrupt 0x%08x\n", reason);
+	if (!(reason & MSP_TWI_INT_STS_DONE))
+		return IRQ_NONE;
+
+	data->last_result = pmcmsptwi_get_result(reason);
+	complete(&data->wait);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Probe for and register the device and return 0 if there is one.
+ */
+static int pmcmsptwi_probe(struct platform_device *pldev)
+{
+	struct resource *res;
+	int rc = -ENODEV;
+
+	/* get the static platform resources */
+	res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pldev->dev, "IOMEM resource not found\n");
+		goto ret_err;
+	}
+
+	/* reserve the memory region */
+	if (!request_mem_region(res->start, resource_size(res),
+				pldev->name)) {
+		dev_err(&pldev->dev,
+			"Unable to get memory/io address region 0x%08x\n",
+			res->start);
+		rc = -EBUSY;
+		goto ret_err;
+	}
+
+	/* remap the memory */
+	pmcmsptwi_data.iobase = ioremap_nocache(res->start,
+						resource_size(res));
+	if (!pmcmsptwi_data.iobase) {
+		dev_err(&pldev->dev,
+			"Unable to ioremap address 0x%08x\n", res->start);
+		rc = -EIO;
+		goto ret_unreserve;
+	}
+
+	/* request the irq */
+	pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
+	if (pmcmsptwi_data.irq) {
+		rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
+				 IRQF_SHARED, pldev->name, &pmcmsptwi_data);
+		if (rc == 0) {
+			/*
+			 * Enable 'DONE' interrupt only.
+			 *
+			 * If you enable all interrupts, you will get one on
+			 * error and another when the operation completes.
+			 * This way you only have to handle one interrupt,
+			 * but you can still check all result flags.
+			 */
+			pmcmsptwi_writel(MSP_TWI_INT_STS_DONE,
+					pmcmsptwi_data.iobase +
+					MSP_TWI_INT_MSK_REG_OFFSET);
+		} else {
+			dev_warn(&pldev->dev,
+				"Could not assign TWI IRQ handler "
+				"to irq %d (continuing with poll)\n",
+				pmcmsptwi_data.irq);
+			pmcmsptwi_data.irq = 0;
+		}
+	}
+
+	init_completion(&pmcmsptwi_data.wait);
+	mutex_init(&pmcmsptwi_data.lock);
+
+	pmcmsptwi_set_clock_config(&pmcmsptwi_defclockcfg, &pmcmsptwi_data);
+	pmcmsptwi_set_twi_config(&pmcmsptwi_defcfg, &pmcmsptwi_data);
+
+	printk(KERN_INFO DRV_NAME ": Registering MSP71xx I2C adapter\n");
+
+	pmcmsptwi_adapter.dev.parent = &pldev->dev;
+	platform_set_drvdata(pldev, &pmcmsptwi_adapter);
+	i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
+
+	rc = i2c_add_adapter(&pmcmsptwi_adapter);
+	if (rc)
+		goto ret_unmap;
+
+	return 0;
+
+ret_unmap:
+	if (pmcmsptwi_data.irq) {
+		pmcmsptwi_writel(0,
+			pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+		free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+	}
+
+	iounmap(pmcmsptwi_data.iobase);
+
+ret_unreserve:
+	release_mem_region(res->start, resource_size(res));
+
+ret_err:
+	return rc;
+}
+
+/*
+ * Release the device and return 0 if there is one.
+ */
+static int pmcmsptwi_remove(struct platform_device *pldev)
+{
+	struct resource *res;
+
+	i2c_del_adapter(&pmcmsptwi_adapter);
+
+	if (pmcmsptwi_data.irq) {
+		pmcmsptwi_writel(0,
+			pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+		free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+	}
+
+	iounmap(pmcmsptwi_data.iobase);
+
+	res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	return 0;
+}
+
+/*
+ * Polls the 'busy' register until the command is complete.
+ * NOTE: Assumes data->lock is held.
+ */
+static void pmcmsptwi_poll_complete(struct pmcmsptwi_data *data)
+{
+	int i;
+
+	for (i = 0; i < MSP_MAX_POLL; i++) {
+		u32 val = pmcmsptwi_readl(data->iobase +
+						MSP_TWI_BUSY_REG_OFFSET);
+		if (val == 0) {
+			u32 reason = pmcmsptwi_readl(data->iobase +
+						MSP_TWI_INT_STS_REG_OFFSET);
+			pmcmsptwi_writel(reason, data->iobase +
+						MSP_TWI_INT_STS_REG_OFFSET);
+			data->last_result = pmcmsptwi_get_result(reason);
+			return;
+		}
+		udelay(MSP_POLL_DELAY);
+	}
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Result: Poll timeout\n");
+	data->last_result = MSP_TWI_XFER_TIMEOUT;
+}
+
+/*
+ * Do the transfer (low level):
+ *   May use interrupt-driven or polling, depending on if an IRQ is
+ *   presently registered.
+ * NOTE: Assumes data->lock is held.
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_do_xfer(
+			u32 reg, struct pmcmsptwi_data *data)
+{
+	dev_dbg(&pmcmsptwi_adapter.dev, "Writing cmd reg 0x%08x\n", reg);
+	pmcmsptwi_writel(reg, data->iobase + MSP_TWI_CMD_REG_OFFSET);
+	if (data->irq) {
+		unsigned long timeleft = wait_for_completion_timeout(
+						&data->wait, MSP_IRQ_TIMEOUT);
+		if (timeleft == 0) {
+			dev_dbg(&pmcmsptwi_adapter.dev,
+				"Result: IRQ timeout\n");
+			complete(&data->wait);
+			data->last_result = MSP_TWI_XFER_TIMEOUT;
+		}
+	} else
+		pmcmsptwi_poll_complete(data);
+
+	return data->last_result;
+}
+
+/*
+ * Helper routine, converts 'pmctwi_cmd' struct to register format
+ */
+static inline u32 pmcmsptwi_cmd_to_reg(const struct pmcmsptwi_cmd *cmd)
+{
+	return ((cmd->type & 0x3) << 8) |
+		(((cmd->write_len - 1) & 0x7) << 4) |
+		((cmd->read_len - 1) & 0x7);
+}
+
+/*
+ * Do the transfer (high level)
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
+			struct pmcmsptwi_cmd *cmd,
+			struct pmcmsptwi_data *data)
+{
+	enum pmcmsptwi_xfer_result retval;
+
+	if ((cmd->type == MSP_TWI_CMD_WRITE && cmd->write_len == 0) ||
+	    (cmd->type == MSP_TWI_CMD_READ && cmd->read_len == 0) ||
+	    (cmd->type == MSP_TWI_CMD_WRITE_READ &&
+	    (cmd->read_len == 0 || cmd->write_len == 0))) {
+		dev_err(&pmcmsptwi_adapter.dev,
+			"%s: Cannot transfer less than 1 byte\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	dev_dbg(&pmcmsptwi_adapter.dev,
+		"Setting address to 0x%04x\n", cmd->addr);
+	pmcmsptwi_writel(cmd->addr, data->iobase + MSP_TWI_ADD_REG_OFFSET);
+
+	if (cmd->type == MSP_TWI_CMD_WRITE ||
+	    cmd->type == MSP_TWI_CMD_WRITE_READ) {
+		u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
+		tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
+		dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
+		pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
+				data->iobase + MSP_TWI_DAT_0_REG_OFFSET);
+		if (cmd->write_len > 4)
+			pmcmsptwi_writel(tmp >> 32,
+				data->iobase + MSP_TWI_DAT_1_REG_OFFSET);
+	}
+
+	retval = pmcmsptwi_do_xfer(pmcmsptwi_cmd_to_reg(cmd), data);
+	if (retval != MSP_TWI_XFER_OK)
+		goto xfer_err;
+
+	if (cmd->type == MSP_TWI_CMD_READ ||
+	    cmd->type == MSP_TWI_CMD_WRITE_READ) {
+		int i;
+		u64 rmsk = ~(0xffffffffffffffffLL << (cmd->read_len * 8));
+		u64 tmp = (u64)pmcmsptwi_readl(data->iobase +
+					MSP_TWI_DAT_0_REG_OFFSET);
+		if (cmd->read_len > 4)
+			tmp |= (u64)pmcmsptwi_readl(data->iobase +
+					MSP_TWI_DAT_1_REG_OFFSET) << 32;
+		tmp &= rmsk;
+		dev_dbg(&pmcmsptwi_adapter.dev, "Read 0x%016llx\n", tmp);
+
+		for (i = 0; i < cmd->read_len; i++)
+			cmd->read_data[i] = tmp >> i;
+	}
+
+xfer_err:
+	mutex_unlock(&data->lock);
+
+	return retval;
+}
+
+/* -- Algorithm functions -- */
+
+/*
+ * Sends an i2c command out on the adapter
+ */
+static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msg, int num)
+{
+	struct pmcmsptwi_data *data = i2c_get_adapdata(adap);
+	struct pmcmsptwi_cmd cmd;
+	struct pmcmsptwi_cfg oldcfg, newcfg;
+	int ret;
+
+	if (num == 2) {
+		struct i2c_msg *nextmsg = msg + 1;
+
+		cmd.type = MSP_TWI_CMD_WRITE_READ;
+		cmd.write_len = msg->len;
+		cmd.write_data = msg->buf;
+		cmd.read_len = nextmsg->len;
+		cmd.read_data = nextmsg->buf;
+	} else if (msg->flags & I2C_M_RD) {
+		cmd.type = MSP_TWI_CMD_READ;
+		cmd.read_len = msg->len;
+		cmd.read_data = msg->buf;
+		cmd.write_len = 0;
+		cmd.write_data = NULL;
+	} else {
+		cmd.type = MSP_TWI_CMD_WRITE;
+		cmd.read_len = 0;
+		cmd.read_data = NULL;
+		cmd.write_len = msg->len;
+		cmd.write_data = msg->buf;
+	}
+
+	if (msg->len == 0) {
+		dev_err(&adap->dev, "Zero-byte messages unsupported\n");
+		return -EINVAL;
+	}
+
+	cmd.addr = msg->addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		pmcmsptwi_get_twi_config(&newcfg, data);
+		memcpy(&oldcfg, &newcfg, sizeof(oldcfg));
+
+		/* Set the special 10-bit address flag */
+		newcfg.add10 = 1;
+
+		pmcmsptwi_set_twi_config(&newcfg, data);
+	}
+
+	/* Execute the command */
+	ret = pmcmsptwi_xfer_cmd(&cmd, data);
+
+	if (msg->flags & I2C_M_TEN)
+		pmcmsptwi_set_twi_config(&oldcfg, data);
+
+	dev_dbg(&adap->dev, "I2C %s of %d bytes %s\n",
+		(msg->flags & I2C_M_RD) ? "read" : "write", msg->len,
+		(ret == MSP_TWI_XFER_OK) ? "succeeded" : "failed");
+
+	if (ret != MSP_TWI_XFER_OK) {
+		/*
+		 * TODO: We could potentially loop and retry in the case
+		 * of MSP_TWI_XFER_TIMEOUT.
+		 */
+		return -EIO;
+	}
+
+	return num;
+}
+
+static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static const struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_write_len = MSP_MAX_BYTES_PER_RW,
+	.max_read_len = MSP_MAX_BYTES_PER_RW,
+	.max_comb_1st_msg_len = MSP_MAX_BYTES_PER_RW,
+	.max_comb_2nd_msg_len = MSP_MAX_BYTES_PER_RW,
+};
+
+/* -- Initialization -- */
+
+static const struct i2c_algorithm pmcmsptwi_algo = {
+	.master_xfer	= pmcmsptwi_master_xfer,
+	.functionality	= pmcmsptwi_i2c_func,
+};
+
+static struct i2c_adapter pmcmsptwi_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &pmcmsptwi_algo,
+	.quirks		= &pmcmsptwi_i2c_quirks,
+	.name		= DRV_NAME,
+};
+
+static struct platform_driver pmcmsptwi_driver = {
+	.probe  = pmcmsptwi_probe,
+	.remove	= pmcmsptwi_remove,
+	.driver = {
+		.name	= DRV_NAME,
+	},
+};
+
+module_platform_driver(pmcmsptwi_driver);
+
+MODULE_DESCRIPTION("PMC MSP TWI/SMBus/I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pnx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pnx.c
new file mode 100644
index 0000000..42d6b3a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pnx.c
@@ -0,0 +1,775 @@
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *	    Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-pnx.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define I2C_PNX_TIMEOUT_DEFAULT		10 /* msec */
+#define I2C_PNX_SPEED_KHZ_DEFAULT	100
+#define I2C_PNX_REGION_SIZE		0x100
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_drsie = 0x00000010,
+	mcntrl_rffie = 0x00000020,
+	mcntrl_daie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+static inline int wait_timeout(struct i2c_pnx_algo_data *data)
+{
+	long timeout = data->timeout;
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline int wait_reset(struct i2c_pnx_algo_data *data)
+{
+	long timeout = data->timeout;
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
+{
+	struct timer_list *timer = &alg_data->mif.timer;
+	unsigned long expires = msecs_to_jiffies(alg_data->timeout);
+
+	if (expires <= 1)
+		expires = 2;
+
+	del_timer_sync(timer);
+
+	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n",
+		jiffies, expires);
+
+	timer->expires = jiffies + expires;
+	timer->data = (unsigned long)alg_data;
+
+	add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr:		slave address
+ * @adap:		pointer to adapter structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr,
+	struct i2c_pnx_algo_data *alg_data)
+{
+	dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
+		slave_addr, alg_data->mif.mode);
+
+	/* Check for 7 bit slave addresses only */
+	if (slave_addr & ~0x7f) {
+		dev_err(&alg_data->adapter.dev,
+			"%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
+			alg_data->adapter.name, slave_addr);
+		return -EINVAL;
+	}
+
+	/* First, make sure bus is idle */
+	if (wait_timeout(alg_data)) {
+		/* Somebody else is monopolizing the bus */
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
+			alg_data->adapter.name, slave_addr,
+			ioread32(I2C_REG_CTL(alg_data)),
+			ioread32(I2C_REG_STS(alg_data)));
+		return -EBUSY;
+	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+		/* Sorry, we lost the bus */
+		dev_err(&alg_data->adapter.dev,
+		        "%s: Arbitration failure. Slave addr = %02x\n",
+			alg_data->adapter.name, slave_addr);
+		return -EIO;
+	}
+
+	/*
+	 * OK, I2C is enabled and we have the bus.
+	 * Clear the current TDI and AFI status flags.
+	 */
+	iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+		  I2C_REG_STS(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
+		(slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+	/* Write the slave address, START bit and R/W bit */
+	iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+		  I2C_REG_TX(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
+{
+	/* Only 1 msec max timeout due to interrupt context */
+	long timeout = 1000;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Write a STOP bit to TX FIFO */
+	iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+	/* Wait until the STOP is seen. */
+	while (timeout > 0 &&
+	       (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+		/* may be called from interrupt context */
+		udelay(1);
+		timeout--;
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
+{
+	u32 val;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (alg_data->mif.len > 0) {
+		/* We still have something to talk about... */
+		val = *alg_data->mif.buf++;
+
+		if (alg_data->mif.len == 1)
+			val |= stop_bit;
+
+		alg_data->mif.len--;
+		iowrite32(val, I2C_REG_TX(alg_data));
+
+		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
+			__func__, val, alg_data->mif.len + 1);
+
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last) {
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(alg_data))
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
+			}
+			/* Disable master interrupts */
+			iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+				~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+				  I2C_REG_CTL(alg_data));
+
+			del_timer_sync(&alg_data->mif.timer);
+
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Waking up xfer routine.\n",
+				__func__);
+
+			complete(&alg_data->mif.complete);
+		}
+	} else if (alg_data->mif.len == 0) {
+		/* zero-sized transfer */
+		i2c_pnx_stop(alg_data);
+
+		/* Disable master interrupts. */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+			~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+			  I2C_REG_CTL(alg_data));
+
+		/* Stop timer. */
+		del_timer_sync(&alg_data->mif.timer);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Waking up xfer routine after zero-xfer.\n",
+			__func__);
+
+		complete(&alg_data->mif.complete);
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
+{
+	unsigned int val = 0;
+	u32 ctl = 0;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Check, whether there is already data,
+	 * or we didn't 'ask' for it yet.
+	 */
+	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+		/* 'Asking' is done asynchronously, e.g. dummy TX of several
+		 * bytes is done before the first actual RX arrives in FIFO.
+		 * Therefore, ordered bytes (via TX) are counted separately.
+		 */
+		if (alg_data->mif.order) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Write dummy data to fill Rx-fifo...\n",
+				__func__);
+
+			if (alg_data->mif.order == 1) {
+				/* Last byte, do not acknowledge next rcv. */
+				val |= stop_bit;
+
+				/*
+				 * Enable interrupt RFDAIE (data in Rx fifo),
+				 * and disable DRMIE (need data for Tx)
+				 */
+				ctl = ioread32(I2C_REG_CTL(alg_data));
+				ctl |= mcntrl_rffie | mcntrl_daie;
+				ctl &= ~mcntrl_drmie;
+				iowrite32(ctl, I2C_REG_CTL(alg_data));
+			}
+
+			/*
+			 * Now we'll 'ask' for data:
+			 * For each byte we want to receive, we must
+			 * write a (dummy) byte to the Tx-FIFO.
+			 */
+			iowrite32(val, I2C_REG_TX(alg_data));
+			alg_data->mif.order--;
+		}
+		return 0;
+	}
+
+	/* Handle data. */
+	if (alg_data->mif.len > 0) {
+		val = ioread32(I2C_REG_RX(alg_data));
+		*alg_data->mif.buf++ = (u8) (val & 0xff);
+		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
+			__func__, val, alg_data->mif.len);
+
+		alg_data->mif.len--;
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last)
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(alg_data))
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
+
+			/* Disable master interrupts */
+			ctl = ioread32(I2C_REG_CTL(alg_data));
+			ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+				 mcntrl_drmie | mcntrl_daie);
+			iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+			/* Kill timer. */
+			del_timer_sync(&alg_data->mif.timer);
+			complete(&alg_data->mif.complete);
+		}
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_id;
+	u32 stat, ctl;
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): mstat = %x mctrl = %x, mode = %d\n",
+		__func__,
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)),
+		alg_data->mif.mode);
+	stat = ioread32(I2C_REG_STS(alg_data));
+
+	/* let's see what kind of event this is */
+	if (stat & mstatus_afi) {
+		/* We lost arbitration in the midst of a transfer */
+		alg_data->mif.ret = -EIO;
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else if (stat & mstatus_nai) {
+		/* Slave did not acknowledge, generate a STOP */
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Slave did not acknowledge, generating a STOP.\n",
+			__func__);
+		i2c_pnx_stop(alg_data);
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Our return value. */
+		alg_data->mif.ret = -EIO;
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else {
+		/*
+		 * Two options:
+		 * - Master Tx needs data.
+		 * - There is data in the Rx-fifo
+		 * The latter is only the case if we have requested for data,
+		 * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+		 * We therefore check, as a sanity check, whether that interrupt
+		 * has been enabled.
+		 */
+		if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+			if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+				i2c_pnx_master_xmit(alg_data);
+			} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+				i2c_pnx_master_rcv(alg_data);
+			}
+		}
+	}
+
+	/* Clear TDI and AFI bits */
+	stat = ioread32(I2C_REG_STS(alg_data));
+	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): exiting, stat = %x ctrl = %x.\n",
+		 __func__, ioread32(I2C_REG_STS(alg_data)),
+		 ioread32(I2C_REG_CTL(alg_data)));
+
+	return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(unsigned long data)
+{
+	struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
+	u32 ctl;
+
+	dev_err(&alg_data->adapter.dev,
+		"Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)));
+
+	/* Reset master and disable interrupts */
+	ctl = ioread32(I2C_REG_CTL(alg_data));
+	ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+	ctl |= mcntrl_reset;
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+	wait_reset(alg_data);
+	alg_data->mif.ret = -EIO;
+	complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
+{
+	u32 stat;
+
+	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus is still active after xfer. Reset it...\n",
+			alg_data->adapter.name);
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	} else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+		/* If there is data in the fifo's after transfer,
+		 * flush fifo's by reset.
+		 */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	} else if (stat & mstatus_nai) {
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	}
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap:		pointer to I2C adapter structure
+ * @msgs:		array of messages
+ * @num:		number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int rc = 0, completed = 0, i;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 stat;
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): entering: %d messages, stat = %04x.\n",
+		__func__, num, ioread32(I2C_REG_STS(alg_data)));
+
+	bus_reset_if_active(alg_data);
+
+	/* Process transactions in a loop. */
+	for (i = 0; rc >= 0 && i < num; i++) {
+		u8 addr;
+
+		pmsg = &msgs[i];
+		addr = pmsg->addr;
+
+		if (pmsg->flags & I2C_M_TEN) {
+			dev_err(&alg_data->adapter.dev,
+				"%s: 10 bits addr not supported!\n",
+				alg_data->adapter.name);
+			rc = -EINVAL;
+			break;
+		}
+
+		alg_data->mif.buf = pmsg->buf;
+		alg_data->mif.len = pmsg->len;
+		alg_data->mif.order = pmsg->len;
+		alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+			I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+		alg_data->mif.ret = 0;
+		alg_data->last = (i == num - 1);
+
+		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
+			__func__, alg_data->mif.mode, alg_data->mif.len);
+
+		i2c_pnx_arm_timer(alg_data);
+
+		/* initialize the completion var */
+		init_completion(&alg_data->mif.complete);
+
+		/* Enable master interrupt */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+				mcntrl_naie | mcntrl_drmie,
+			  I2C_REG_CTL(alg_data));
+
+		/* Put start-code and slave-address on the bus. */
+		rc = i2c_pnx_start(addr, alg_data);
+		if (rc < 0)
+			break;
+
+		/* Wait for completion */
+		wait_for_completion(&alg_data->mif.complete);
+
+		if (!(rc = alg_data->mif.ret))
+			completed++;
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Complete, return code = %d.\n",
+			__func__, rc);
+
+		/* Clear TDI and AFI bits in case they are set. */
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s: TDI still set... clearing now.\n",
+				alg_data->adapter.name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s: AFI still set... clearing now.\n",
+				alg_data->adapter.name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+	}
+
+	bus_reset_if_active(alg_data);
+
+	/* Cleanup to be sure... */
+	alg_data->mif.buf = NULL;
+	alg_data->mif.len = 0;
+	alg_data->mif.order = 0;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (completed != num)
+		return ((rc < 0) ? rc : -EREMOTEIO);
+
+	return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm pnx_algorithm = {
+	.master_xfer = i2c_pnx_xfer,
+	.functionality = i2c_pnx_func,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int i2c_pnx_controller_suspend(struct device *dev)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(alg_data->clk);
+
+	return 0;
+}
+
+static int i2c_pnx_controller_resume(struct device *dev)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(alg_data->clk);
+}
+
+static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
+			 i2c_pnx_controller_suspend, i2c_pnx_controller_resume);
+#define PNX_I2C_PM	(&i2c_pnx_pm)
+#else
+#define PNX_I2C_PM	NULL
+#endif
+
+static int i2c_pnx_probe(struct platform_device *pdev)
+{
+	unsigned long tmp;
+	int ret = 0;
+	struct i2c_pnx_algo_data *alg_data;
+	unsigned long freq;
+	struct resource *res;
+	u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
+
+	alg_data = devm_kzalloc(&pdev->dev, sizeof(*alg_data), GFP_KERNEL);
+	if (!alg_data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, alg_data);
+
+	alg_data->adapter.dev.parent = &pdev->dev;
+	alg_data->adapter.algo = &pnx_algorithm;
+	alg_data->adapter.algo_data = alg_data;
+	alg_data->adapter.nr = pdev->id;
+
+	alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT;
+#ifdef CONFIG_OF
+	alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node);
+	if (pdev->dev.of_node) {
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				     &speed);
+		/*
+		 * At this point, it is planned to add an OF timeout property.
+		 * As soon as there is a consensus about how to call and handle
+		 * this, sth. like the following can be put here:
+		 *
+		 * of_property_read_u32(pdev->dev.of_node, "timeout",
+		 *                      &alg_data->timeout);
+		 */
+	}
+#endif
+	alg_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(alg_data->clk))
+		return PTR_ERR(alg_data->clk);
+
+	setup_timer(&alg_data->mif.timer, i2c_pnx_timeout,
+			(unsigned long)alg_data);
+
+	snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
+		 "%s", pdev->name);
+
+	/* Register I/O resource */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	alg_data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(alg_data->ioaddr))
+		return PTR_ERR(alg_data->ioaddr);
+
+	ret = clk_prepare_enable(alg_data->clk);
+	if (ret)
+		return ret;
+
+	freq = clk_get_rate(alg_data->clk);
+
+	/*
+	 * Clock Divisor High This value is the number of system clocks
+	 * the serial clock (SCL) will be high.
+	 * For example, if the system clock period is 50 ns and the maximum
+	 * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+	 * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+	 * programmed into CLKHI will vary from this slightly due to
+	 * variations in the output pad's rise and fall times as well as
+	 * the deglitching filter length.
+	 */
+
+	tmp = (freq / speed) / 2 - 2;
+	if (tmp > 0x3FF)
+		tmp = 0x3FF;
+	iowrite32(tmp, I2C_REG_CKH(alg_data));
+	iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+	if (wait_reset(alg_data)) {
+		ret = -ENODEV;
+		goto out_clock;
+	}
+	init_completion(&alg_data->mif.complete);
+
+	alg_data->irq = platform_get_irq(pdev, 0);
+	if (alg_data->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
+		ret = alg_data->irq;
+		goto out_clock;
+	}
+	ret = devm_request_irq(&pdev->dev, alg_data->irq, i2c_pnx_interrupt,
+			       0, pdev->name, alg_data);
+	if (ret)
+		goto out_clock;
+
+	/* Register this adapter with the I2C subsystem */
+	ret = i2c_add_numbered_adapter(&alg_data->adapter);
+	if (ret < 0)
+		goto out_clock;
+
+	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
+		alg_data->adapter.name, res->start, alg_data->irq);
+
+	return 0;
+
+out_clock:
+	clk_disable_unprepare(alg_data->clk);
+	return ret;
+}
+
+static int i2c_pnx_remove(struct platform_device *pdev)
+{
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&alg_data->adapter);
+	clk_disable_unprepare(alg_data->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pnx_of_match[] = {
+	{ .compatible = "nxp,pnx-i2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, i2c_pnx_of_match);
+#endif
+
+static struct platform_driver i2c_pnx_driver = {
+	.driver = {
+		.name = "pnx-i2c",
+		.of_match_table = of_match_ptr(i2c_pnx_of_match),
+		.pm = PNX_I2C_PM,
+	},
+	.probe = i2c_pnx_probe,
+	.remove = i2c_pnx_remove,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+	return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+	platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pnx-i2c");
+
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+module_exit(i2c_adap_pnx_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-powermac.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-powermac.c
new file mode 100644
index 0000000..f2a2067
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-powermac.c
@@ -0,0 +1,464 @@
+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
+					u16			addr,
+					unsigned short		flags,
+					char			read_write,
+					u8			command,
+					int			size,
+					union i2c_smbus_data*	data)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			read = (read_write == I2C_SMBUS_READ);
+	int			addrdir = (addr << 1) | read;
+	int			mode, subsize, len;
+	u32			subaddr;
+	u8			*buf;
+	u8			local[2];
+
+	if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
+		mode = pmac_i2c_mode_std;
+		subsize = 0;
+		subaddr = 0;
+	} else {
+		mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
+		subsize = 1;
+		subaddr = command;
+	}
+
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+		buf = NULL;
+		len = 0;
+	    	break;
+        case I2C_SMBUS_BYTE:
+        case I2C_SMBUS_BYTE_DATA:
+		buf = &data->byte;
+		len = 1;
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		if (!read) {
+			local[0] = data->word & 0xff;
+			local[1] = (data->word >> 8) & 0xff;
+		}
+		buf = local;
+		len = 2;
+	    	break;
+
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the length is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 *
+	 * I'm also not completely sure what kind of phases to do between
+	 * the actual command and the data (what I am _supposed_ to do that
+	 * is). For now, I assume writes are a single stream and reads have
+	 * a repeat start/addr phase (but not stop in between)
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+		buf = data->block;
+		len = data->block[0] + 1;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		buf = &data->block[1];
+		len = data->block[0];
+		break;
+
+        default:
+		return -EINVAL;
+	}
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
+		return rc;
+	}
+
+	rc = pmac_i2c_setmode(bus, mode);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			mode, rc);
+		goto bail;
+	}
+
+	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
+	if (rc) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		goto bail;
+	}
+
+	if (size == I2C_SMBUS_WORD_DATA && read) {
+		data->word = ((u16)local[1]) << 8;
+		data->word |= local[0];
+	}
+
+ bail:
+	pmac_i2c_close(bus);
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
+					struct i2c_msg *msgs,
+					int num)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			addrdir;
+
+	if (msgs->flags & I2C_M_TEN)
+		return -EINVAL;
+	addrdir = i2c_8bit_addr_from_msg(msgs);
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
+		return rc;
+	}
+	rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			pmac_i2c_mode_std, rc);
+		goto bail;
+	}
+	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
+ bail:
+	pmac_i2c_close(bus);
+	return rc < 0 ? rc : 1;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static const struct i2c_algorithm i2c_powermac_algorithm = {
+	.smbus_xfer	= i2c_powermac_smbus_xfer,
+	.master_xfer	= i2c_powermac_master_xfer,
+	.functionality	= i2c_powermac_func,
+};
+
+static const struct i2c_adapter_quirks i2c_powermac_quirks = {
+	.max_num_msgs = 1,
+};
+
+static int i2c_powermac_remove(struct platform_device *dev)
+{
+	struct i2c_adapter	*adapter = platform_get_drvdata(dev);
+
+	i2c_del_adapter(adapter);
+	memset(adapter, 0, sizeof(*adapter));
+
+	return 0;
+}
+
+static u32 i2c_powermac_get_addr(struct i2c_adapter *adap,
+					   struct pmac_i2c_bus *bus,
+					   struct device_node *node)
+{
+	const __be32 *prop;
+	int len;
+
+	/* First check for valid "reg" */
+	prop = of_get_property(node, "reg", &len);
+	if (prop && (len >= sizeof(int)))
+		return (be32_to_cpup(prop) & 0xff) >> 1;
+
+	/* Then check old-style "i2c-address" */
+	prop = of_get_property(node, "i2c-address", &len);
+	if (prop && (len >= sizeof(int)))
+		return (be32_to_cpup(prop) & 0xff) >> 1;
+
+	/* Now handle some devices with missing "reg" properties */
+	if (!strcmp(node->name, "cereal"))
+		return 0x60;
+	else if (!strcmp(node->name, "deq"))
+		return 0x34;
+
+	dev_warn(&adap->dev, "No i2c address for %pOF\n", node);
+
+	return 0xffffffff;
+}
+
+static void i2c_powermac_create_one(struct i2c_adapter *adap,
+					      const char *type,
+					      u32 addr)
+{
+	struct i2c_board_info info = {};
+	struct i2c_client *newdev;
+
+	strncpy(info.type, type, sizeof(info.type));
+	info.addr = addr;
+	newdev = i2c_new_device(adap, &info);
+	if (!newdev)
+		dev_err(&adap->dev,
+			"i2c-powermac: Failure to register missing %s\n",
+			type);
+}
+
+static void i2c_powermac_add_missing(struct i2c_adapter *adap,
+					       struct pmac_i2c_bus *bus,
+					       bool found_onyx)
+{
+	struct device_node *busnode = pmac_i2c_get_bus_node(bus);
+	int rc;
+
+	/* Check for the onyx audio codec */
+#define ONYX_REG_CONTROL		67
+	if (of_device_is_compatible(busnode, "k2-i2c") && !found_onyx) {
+		union i2c_smbus_data data;
+
+		rc = i2c_smbus_xfer(adap, 0x46, 0, I2C_SMBUS_READ,
+				    ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA,
+				    &data);
+		if (rc >= 0)
+			i2c_powermac_create_one(adap, "MAC,pcm3052", 0x46);
+
+		rc = i2c_smbus_xfer(adap, 0x47, 0, I2C_SMBUS_READ,
+				    ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA,
+				    &data);
+		if (rc >= 0)
+			i2c_powermac_create_one(adap, "MAC,pcm3052", 0x47);
+	}
+}
+
+static bool i2c_powermac_get_type(struct i2c_adapter *adap,
+					    struct device_node *node,
+					    u32 addr, char *type, int type_size)
+{
+	char tmp[16];
+
+	/* Note: we to _NOT_ want the standard
+	 * i2c drivers to match with any of our powermac stuff
+	 * unless they have been specifically modified to handle
+	 * it on a case by case basis. For example, for thermal
+	 * control, things like lm75 etc... shall match with their
+	 * corresponding windfarm drivers, _NOT_ the generic ones,
+	 * so we force a prefix of AAPL, onto the modalias to
+	 * make that happen
+	 */
+
+	/* First try proper modalias */
+	if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) {
+		snprintf(type, type_size, "MAC,%s", tmp);
+		return true;
+	}
+
+	/* Now look for known workarounds */
+	if (!strcmp(node->name, "deq")) {
+		/* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */
+		if (addr == 0x34) {
+			snprintf(type, type_size, "MAC,tas3001");
+			return true;
+		} else if (addr == 0x35) {
+			snprintf(type, type_size, "MAC,tas3004");
+			return true;
+		}
+	}
+
+	dev_err(&adap->dev, "i2c-powermac: modalias failure on %pOF\n", node);
+	return false;
+}
+
+static void i2c_powermac_register_devices(struct i2c_adapter *adap,
+						    struct pmac_i2c_bus *bus)
+{
+	struct i2c_client *newdev;
+	struct device_node *node;
+	bool found_onyx = 0;
+
+	/*
+	 * In some cases we end up with the via-pmu node itself, in this
+	 * case we skip this function completely as the device-tree will
+	 * not contain anything useful.
+	 */
+	if (!strcmp(adap->dev.of_node->name, "via-pmu"))
+		return;
+
+	for_each_child_of_node(adap->dev.of_node, node) {
+		struct i2c_board_info info = {};
+		u32 addr;
+
+		/* Get address & channel */
+		addr = i2c_powermac_get_addr(adap, bus, node);
+		if (addr == 0xffffffff)
+			continue;
+
+		/* Multibus setup, check channel */
+		if (!pmac_i2c_match_adapter(node, adap))
+			continue;
+
+		dev_dbg(&adap->dev, "i2c-powermac: register %pOF\n", node);
+
+		/*
+		 * Keep track of some device existence to handle
+		 * workarounds later.
+		 */
+		if (of_device_is_compatible(node, "pcm3052"))
+			found_onyx = true;
+
+		/* Make up a modalias */
+		if (!i2c_powermac_get_type(adap, node, addr,
+					   info.type, sizeof(info.type))) {
+			continue;
+		}
+
+		/* Fill out the rest of the info structure */
+		info.addr = addr;
+		info.irq = irq_of_parse_and_map(node, 0);
+		info.of_node = of_node_get(node);
+
+		newdev = i2c_new_device(adap, &info);
+		if (!newdev) {
+			dev_err(&adap->dev, "i2c-powermac: Failure to register"
+				" %pOF\n", node);
+			of_node_put(node);
+			/* We do not dispose of the interrupt mapping on
+			 * purpose. It's not necessary (interrupt cannot be
+			 * re-used) and somebody else might have grabbed it
+			 * via direct DT lookup so let's not bother
+			 */
+			continue;
+		}
+	}
+
+	/* Additional workarounds */
+	i2c_powermac_add_missing(adap, bus, found_onyx);
+}
+
+static int i2c_powermac_probe(struct platform_device *dev)
+{
+	struct pmac_i2c_bus *bus = dev_get_platdata(&dev->dev);
+	struct device_node *parent = NULL;
+	struct i2c_adapter *adapter;
+	const char *basename;
+	int rc;
+
+	if (bus == NULL)
+		return -EINVAL;
+	adapter = pmac_i2c_get_adapter(bus);
+
+	/* Ok, now we need to make up a name for the interface that will
+	 * match what we used to do in the past, that is basically the
+	 * controller's parent device node for keywest. PMU didn't have a
+	 * naming convention and SMU has a different one
+	 */
+	switch(pmac_i2c_get_type(bus)) {
+	case pmac_i2c_bus_keywest:
+		parent = of_get_parent(pmac_i2c_get_controller(bus));
+		if (parent == NULL)
+			return -EINVAL;
+		basename = parent->name;
+		break;
+	case pmac_i2c_bus_pmu:
+		basename = "pmu";
+		break;
+	case pmac_i2c_bus_smu:
+		/* This is not what we used to do but I'm fixing drivers at
+		 * the same time as this change
+		 */
+		basename = "smu";
+		break;
+	default:
+		return -EINVAL;
+	}
+	snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
+		 pmac_i2c_get_channel(bus));
+	of_node_put(parent);
+
+	platform_set_drvdata(dev, adapter);
+	adapter->algo = &i2c_powermac_algorithm;
+	adapter->quirks = &i2c_powermac_quirks;
+	i2c_set_adapdata(adapter, bus);
+	adapter->dev.parent = &dev->dev;
+
+	/* Clear of_node to skip automatic registration of i2c child nodes */
+	adapter->dev.of_node = NULL;
+	rc = i2c_add_adapter(adapter);
+	if (rc) {
+		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+		       "failed\n", adapter->name);
+		memset(adapter, 0, sizeof(*adapter));
+		return rc;
+	}
+
+	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
+
+	/* Use custom child registration due to Apple device-tree funkyness */
+	adapter->dev.of_node = dev->dev.of_node;
+	i2c_powermac_register_devices(adapter, bus);
+
+	return 0;
+}
+
+static struct platform_driver i2c_powermac_driver = {
+	.probe = i2c_powermac_probe,
+	.remove = i2c_powermac_remove,
+	.driver = {
+		.name = "i2c-powermac",
+		.bus = &platform_bus_type,
+	},
+};
+
+module_platform_driver(i2c_powermac_driver);
+
+MODULE_ALIAS("platform:i2c-powermac");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-puv3.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-puv3.c
new file mode 100644
index 0000000..287088b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-puv3.c
@@ -0,0 +1,278 @@
+/*
+ * I2C driver for PKUnity-v3 SoC
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short poll_status(unsigned long bit)
+{
+	int loop_cntr = 1000;
+
+	if (bit & I2C_STATUS_TFNF) {
+		do {
+			udelay(10);
+		} while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0));
+	} else {
+		/* RXRDY handler */
+		do {
+			if (readl(I2C_TAR) == I2C_TAR_EEPROM)
+				msleep(20);
+			else
+				udelay(10);
+		} while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0));
+	}
+
+	return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+	int i2c_reg = *buf;
+
+	/* Read data */
+	while (length--) {
+		if (!poll_status(I2C_STATUS_TFNF)) {
+			dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		/* send addr */
+		writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* get ready to next write */
+		i2c_reg++;
+
+		/* send read CMD */
+		writel(I2C_DATACMD_READ, I2C_DATACMD);
+
+		/* wait until the Rx FIFO have available */
+		if (!poll_status(I2C_STATUS_RFNE)) {
+			dev_dbg(&adap->dev, "RXRDY timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		/* read the data to buf */
+		*buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK);
+		buf++;
+	}
+
+	return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+	int i2c_reg = *buf;
+
+	/* Do nothing but storing the reg_num to a static variable */
+	if (i2c_reg == -1) {
+		printk(KERN_WARNING "Error i2c reg\n");
+		return -ETIMEDOUT;
+	}
+
+	if (length == 1)
+		return 0;
+
+	buf++;
+	length--;
+	while (length--) {
+		/* send addr */
+		writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* send write CMD */
+		writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* wait until the Rx FIFO have available */
+		msleep(20);
+
+		/* read the data to buf */
+		i2c_reg++;
+		buf++;
+	}
+
+	return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ */
+static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+		int num)
+{
+	int i, ret;
+	unsigned char swap;
+
+	/* Disable i2c */
+	writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+
+	/* Set the work mode and speed*/
+	writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON);
+
+	writel(pmsg->addr, I2C_TAR);
+
+	/* Enable i2c */
+	writel(I2C_ENABLE_ENABLE, I2C_ENABLE);
+
+	dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num);
+
+	for (i = 0; i < num; i++) {
+		dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+			pmsg->flags & I2C_M_RD ? "read" : "writ",
+			pmsg->len, pmsg->len > 1 ? "s" : "",
+			pmsg->flags & I2C_M_RD ? "from" : "to",	pmsg->addr);
+
+		if (pmsg->len && pmsg->buf) {	/* sanity check */
+			if (pmsg->flags & I2C_M_RD)
+				ret = xfer_read(adap, pmsg->buf, pmsg->len);
+			else
+				ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+			if (ret)
+				return ret;
+
+		}
+		dev_dbg(&adap->dev, "transfer complete\n");
+		pmsg++;		/* next message */
+	}
+
+	/* XXX: fixup be16_to_cpu in bq27x00_battery.c */
+	if (pmsg->addr == I2C_TAR_PWIC) {
+		swap = pmsg->buf[0];
+		pmsg->buf[0] = pmsg->buf[1];
+		pmsg->buf[1] = swap;
+	}
+
+	return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 puv3_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm puv3_i2c_algorithm = {
+	.master_xfer	= puv3_i2c_xfer,
+	.functionality	= puv3_i2c_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int puv3_i2c_probe(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter;
+	struct resource *mem;
+	int rc;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -ENODEV;
+
+	if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c"))
+		return -EBUSY;
+
+	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (adapter == NULL) {
+		dev_err(&pdev->dev, "can't allocate interface!\n");
+		rc = -ENOMEM;
+		goto fail_nomem;
+	}
+	snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x",
+			mem->start);
+	adapter->algo = &puv3_i2c_algorithm;
+	adapter->class = I2C_CLASS_HWMON;
+	adapter->dev.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, adapter);
+
+	adapter->nr = pdev->id;
+	rc = i2c_add_numbered_adapter(adapter);
+	if (rc)
+		goto fail_add_adapter;
+
+	dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
+	return 0;
+
+fail_add_adapter:
+	kfree(adapter);
+fail_nomem:
+	release_mem_region(mem->start, resource_size(mem));
+
+	return rc;
+}
+
+static int puv3_i2c_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct resource *mem;
+
+	i2c_del_adapter(adapter);
+
+	put_device(&pdev->dev);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int puv3_i2c_suspend(struct device *dev)
+{
+	int poll_count;
+	/* Disable the IIC */
+	writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+	for (poll_count = 0; poll_count < 50; poll_count++) {
+		if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE)
+			udelay(25);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL);
+#define PUV3_I2C_PM	(&puv3_i2c_pm)
+
+#else
+#define PUV3_I2C_PM	NULL
+#endif
+
+static struct platform_driver puv3_i2c_driver = {
+	.probe		= puv3_i2c_probe,
+	.remove		= puv3_i2c_remove,
+	.driver		= {
+		.name	= "PKUnity-v3-I2C",
+		.pm	= PUV3_I2C_PM,
+	}
+};
+
+module_platform_driver(puv3_i2c_driver);
+
+MODULE_DESCRIPTION("PKUnity v3 I2C driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:puv3_i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa-pci.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa-pci.c
new file mode 100644
index 0000000..004deb9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa-pci.c
@@ -0,0 +1,154 @@
+/*
+ * CE4100 PCI-I2C glue code for PXA's driver
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * License: GPL v2
+ *
+ * The CE4100's I2C device is more or less the same one as found on PXA.
+ * It does not support slave mode, the register slightly moved. This PCI
+ * device provides three bars, every contains a single I2C controller.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+#define CE4100_PCI_I2C_DEVS	3
+
+struct ce4100_devices {
+	struct platform_device *pdev[CE4100_PCI_I2C_DEVS];
+};
+
+static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar)
+{
+	struct platform_device *pdev;
+	struct i2c_pxa_platform_data pdata;
+	struct resource res[2];
+	struct device_node *child;
+	static int devnum;
+	int ret;
+
+	memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data));
+	memset(&res, 0, sizeof(res));
+
+	res[0].flags = IORESOURCE_MEM;
+	res[0].start = pci_resource_start(dev, bar);
+	res[0].end = pci_resource_end(dev, bar);
+
+	res[1].flags = IORESOURCE_IRQ;
+	res[1].start = dev->irq;
+	res[1].end = dev->irq;
+
+	for_each_child_of_node(dev->dev.of_node, child) {
+		const void *prop;
+		struct resource r;
+		int ret;
+
+		ret = of_address_to_resource(child, 0, &r);
+		if (ret < 0)
+			continue;
+		if (r.start != res[0].start)
+			continue;
+		if (r.end != res[0].end)
+			continue;
+		if (r.flags != res[0].flags)
+			continue;
+
+		prop = of_get_property(child, "fast-mode", NULL);
+		if (prop)
+			pdata.fast_mode = 1;
+
+		break;
+	}
+
+	if (!child) {
+		dev_err(&dev->dev, "failed to match a DT node for bar %d.\n",
+				bar);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	pdev = platform_device_alloc("ce4100-i2c", devnum);
+	if (!pdev) {
+		of_node_put(child);
+		ret = -ENOMEM;
+		goto out;
+	}
+	pdev->dev.parent = &dev->dev;
+	pdev->dev.of_node = child;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+	devnum++;
+	return pdev;
+err:
+	platform_device_put(pdev);
+out:
+	return ERR_PTR(ret);
+}
+
+static int ce4100_i2c_probe(struct pci_dev *dev,
+		const struct pci_device_id *ent)
+{
+	int ret;
+	int i;
+	struct ce4100_devices *sds;
+
+	ret = pci_enable_device_mem(dev);
+	if (ret)
+		return ret;
+
+	if (!dev->dev.of_node) {
+		dev_err(&dev->dev, "Missing device tree node.\n");
+		return -EINVAL;
+	}
+	sds = kzalloc(sizeof(*sds), GFP_KERNEL);
+	if (!sds) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
+		sds->pdev[i] = add_i2c_device(dev, i);
+		if (IS_ERR(sds->pdev[i])) {
+			ret = PTR_ERR(sds->pdev[i]);
+			while (--i >= 0)
+				platform_device_unregister(sds->pdev[i]);
+			goto err_dev_add;
+		}
+	}
+	pci_set_drvdata(dev, sds);
+	return 0;
+
+err_dev_add:
+	kfree(sds);
+err_mem:
+	pci_disable_device(dev);
+	return ret;
+}
+
+static const struct pci_device_id ce4100_i2c_devices[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
+	{ },
+};
+
+static struct pci_driver ce4100_i2c_driver = {
+	.driver = {
+		.suppress_bind_attrs = true,
+	},
+	.name           = "ce4100_i2c",
+	.id_table       = ce4100_i2c_devices,
+	.probe          = ce4100_i2c_probe,
+};
+builtin_pci_driver(ce4100_i2c_driver);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa.c
new file mode 100644
index 0000000..e300f95
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-pxa.c
@@ -0,0 +1,1398 @@
+/*
+ *  i2c_adap_pxa.c
+ *
+ *  I2C adapter for the PXA I2C bus access.
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *  Copyright (C) 2004-2005 Deep Blue Solutions Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  History:
+ *    Apr 2002: Initial version [CS]
+ *    Jun 2002: Properly separated algo/adap [FB]
+ *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
+ *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
+ *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
+ *    Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
+ *    Feb 2005: Rework slave mode handling [RMK]
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/i2c-pxa.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <asm/irq.h>
+
+struct pxa_reg_layout {
+	u32 ibmr;
+	u32 idbr;
+	u32 icr;
+	u32 isr;
+	u32 isar;
+	u32 ilcr;
+	u32 iwcr;
+	u32 fm;
+	u32 hs;
+};
+
+enum pxa_i2c_types {
+	REGS_PXA2XX,
+	REGS_PXA3XX,
+	REGS_CE4100,
+	REGS_PXA910,
+	REGS_A3700,
+};
+
+#define ICR_BUSMODE_FM	(1 << 16)	   /* shifted fast mode for armada-3700 */
+#define ICR_BUSMODE_HS	(1 << 17)	   /* shifted high speed mode for armada-3700 */
+
+/*
+ * I2C registers definitions
+ */
+static struct pxa_reg_layout pxa_reg_layout[] = {
+	[REGS_PXA2XX] = {
+		.ibmr =	0x00,
+		.idbr =	0x08,
+		.icr =	0x10,
+		.isr =	0x18,
+		.isar =	0x20,
+	},
+	[REGS_PXA3XX] = {
+		.ibmr =	0x00,
+		.idbr =	0x04,
+		.icr =	0x08,
+		.isr =	0x0c,
+		.isar =	0x10,
+	},
+	[REGS_CE4100] = {
+		.ibmr =	0x14,
+		.idbr =	0x0c,
+		.icr =	0x00,
+		.isr =	0x04,
+		/* no isar register */
+	},
+	[REGS_PXA910] = {
+		.ibmr = 0x00,
+		.idbr = 0x08,
+		.icr =	0x10,
+		.isr =	0x18,
+		.isar = 0x20,
+		.ilcr = 0x28,
+		.iwcr = 0x30,
+	},
+	[REGS_A3700] = {
+		.ibmr =	0x00,
+		.idbr =	0x04,
+		.icr =	0x08,
+		.isr =	0x0c,
+		.isar =	0x10,
+		.fm = ICR_BUSMODE_FM,
+		.hs = ICR_BUSMODE_HS,
+	},
+};
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+	{ "pxa2xx-i2c",		REGS_PXA2XX },
+	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
+	{ "ce4100-i2c",		REGS_CE4100 },
+	{ "pxa910-i2c",		REGS_PXA910 },
+	{ "armada-3700-i2c",	REGS_A3700  },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
+
+/*
+ * I2C bit definitions
+ */
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+#define ICR_FM		(1 << 15)	   /* fast mode */
+#define ICR_HS		(1 << 16)	   /* High Speed mode */
+#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+/* bit field shift & mask */
+#define ILCR_SLV_SHIFT		0
+#define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
+#define ILCR_FLV_SHIFT		9
+#define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
+#define ILCR_HLVL_SHIFT		18
+#define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
+#define ILCR_HLVH_SHIFT		27
+#define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
+
+#define IWCR_CNT_SHIFT		0
+#define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
+#define IWCR_HS_CNT1_SHIFT	5
+#define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
+#define IWCR_HS_CNT2_SHIFT	10
+#define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
+
+struct pxa_i2c {
+	spinlock_t		lock;
+	wait_queue_head_t	wait;
+	struct i2c_msg		*msg;
+	unsigned int		msg_num;
+	unsigned int		msg_idx;
+	unsigned int		msg_ptr;
+	unsigned int		slave_addr;
+	unsigned int		req_slave_addr;
+
+	struct i2c_adapter	adap;
+	struct clk		*clk;
+#ifdef CONFIG_I2C_PXA_SLAVE
+	struct i2c_slave_client *slave;
+#endif
+
+	unsigned int		irqlogidx;
+	u32			isrlog[32];
+	u32			icrlog[32];
+
+	void __iomem		*reg_base;
+	void __iomem		*reg_ibmr;
+	void __iomem		*reg_idbr;
+	void __iomem		*reg_icr;
+	void __iomem		*reg_isr;
+	void __iomem		*reg_isar;
+	void __iomem		*reg_ilcr;
+	void __iomem		*reg_iwcr;
+
+	unsigned long		iobase;
+	unsigned long		iosize;
+
+	int			irq;
+	unsigned int		use_pio :1;
+	unsigned int		fast_mode :1;
+	unsigned int		high_mode:1;
+	unsigned char		master_code;
+	unsigned long		rate;
+	bool			highmode_enter;
+	u32			fm_mask;
+	u32			hs_mask;
+};
+
+#define _IBMR(i2c)	((i2c)->reg_ibmr)
+#define _IDBR(i2c)	((i2c)->reg_idbr)
+#define _ICR(i2c)	((i2c)->reg_icr)
+#define _ISR(i2c)	((i2c)->reg_isr)
+#define _ISAR(i2c)	((i2c)->reg_isar)
+#define _ILCR(i2c)	((i2c)->reg_ilcr)
+#define _IWCR(i2c)	((i2c)->reg_iwcr)
+
+/*
+ * I2C Slave mode address
+ */
+#define I2C_PXA_SLAVE_ADDR      0x1
+
+#ifdef DEBUG
+
+struct bits {
+	u32	mask;
+	const char *set;
+	const char *unset;
+};
+#define PXA_BIT(m, s, u)	{ .mask = m, .set = s, .unset = u }
+
+static inline void
+decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
+{
+	printk("%s %08x: ", prefix, val);
+	while (num--) {
+		const char *str = val & bits->mask ? bits->set : bits->unset;
+		if (str)
+			printk("%s ", str);
+		bits++;
+	}
+}
+
+static const struct bits isr_bits[] = {
+	PXA_BIT(ISR_RWM,	"RX",		"TX"),
+	PXA_BIT(ISR_ACKNAK,	"NAK",		"ACK"),
+	PXA_BIT(ISR_UB,		"Bsy",		"Rdy"),
+	PXA_BIT(ISR_IBB,	"BusBsy",	"BusRdy"),
+	PXA_BIT(ISR_SSD,	"SlaveStop",	NULL),
+	PXA_BIT(ISR_ALD,	"ALD",		NULL),
+	PXA_BIT(ISR_ITE,	"TxEmpty",	NULL),
+	PXA_BIT(ISR_IRF,	"RxFull",	NULL),
+	PXA_BIT(ISR_GCAD,	"GenCall",	NULL),
+	PXA_BIT(ISR_SAD,	"SlaveAddr",	NULL),
+	PXA_BIT(ISR_BED,	"BusErr",	NULL),
+};
+
+static void decode_ISR(unsigned int val)
+{
+	decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
+	printk("\n");
+}
+
+static const struct bits icr_bits[] = {
+	PXA_BIT(ICR_START,  "START",	NULL),
+	PXA_BIT(ICR_STOP,   "STOP",	NULL),
+	PXA_BIT(ICR_ACKNAK, "ACKNAK",	NULL),
+	PXA_BIT(ICR_TB,     "TB",	NULL),
+	PXA_BIT(ICR_MA,     "MA",	NULL),
+	PXA_BIT(ICR_SCLE,   "SCLE",	"scle"),
+	PXA_BIT(ICR_IUE,    "IUE",	"iue"),
+	PXA_BIT(ICR_GCD,    "GCD",	NULL),
+	PXA_BIT(ICR_ITEIE,  "ITEIE",	NULL),
+	PXA_BIT(ICR_IRFIE,  "IRFIE",	NULL),
+	PXA_BIT(ICR_BEIE,   "BEIE",	NULL),
+	PXA_BIT(ICR_SSDIE,  "SSDIE",	NULL),
+	PXA_BIT(ICR_ALDIE,  "ALDIE",	NULL),
+	PXA_BIT(ICR_SADIE,  "SADIE",	NULL),
+	PXA_BIT(ICR_UR,     "UR",		"ur"),
+};
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+static void decode_ICR(unsigned int val)
+{
+	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
+	printk("\n");
+}
+#endif
+
+static unsigned int i2c_debug = DEBUG;
+
+static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
+{
+	dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
+		readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
+}
+
+#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
+
+static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
+{
+	unsigned int i;
+	struct device *dev = &i2c->adap.dev;
+
+	dev_err(dev, "slave_0x%x error: %s\n",
+		i2c->req_slave_addr >> 1, why);
+	dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n",
+		i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
+	dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
+		readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
+		readl(_ISR(i2c)));
+	dev_err(dev, "log:");
+	for (i = 0; i < i2c->irqlogidx; i++)
+		pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]);
+	pr_cont("\n");
+}
+
+#else /* ifdef DEBUG */
+
+#define i2c_debug	0
+
+#define show_state(i2c) do { } while (0)
+#define decode_ISR(val) do { } while (0)
+#define decode_ICR(val) do { } while (0)
+#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
+
+#endif /* ifdef DEBUG / else */
+
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
+
+static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
+{
+	return !(readl(_ICR(i2c)) & ICR_SCLE);
+}
+
+static void i2c_pxa_abort(struct pxa_i2c *i2c)
+{
+	int i = 250;
+
+	if (i2c_pxa_is_slavemode(i2c)) {
+		dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
+		return;
+	}
+
+	while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+		unsigned long icr = readl(_ICR(i2c));
+
+		icr &= ~ICR_START;
+		icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
+
+		writel(icr, _ICR(i2c));
+
+		show_state(i2c);
+
+		mdelay(1);
+		i --;
+	}
+
+	writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
+	       _ICR(i2c));
+}
+
+static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
+{
+	int timeout = DEF_TIMEOUT;
+
+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+		if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
+			timeout += 4;
+
+		msleep(2);
+		show_state(i2c);
+	}
+
+	if (timeout < 0)
+		show_state(i2c);
+
+	return timeout < 0 ? I2C_RETRY : 0;
+}
+
+static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
+{
+	unsigned long timeout = jiffies + HZ*4;
+
+	while (time_before(jiffies, timeout)) {
+		if (i2c_debug > 1)
+			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
+
+		if (readl(_ISR(i2c)) & ISR_SAD) {
+			if (i2c_debug > 0)
+				dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
+			goto out;
+		}
+
+		/* wait for unit and bus being not busy, and we also do a
+		 * quick check of the i2c lines themselves to ensure they've
+		 * gone high...
+		 */
+		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
+			if (i2c_debug > 0)
+				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
+			return 1;
+		}
+
+		msleep(1);
+	}
+
+	if (i2c_debug > 0)
+		dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
+ out:
+	return 0;
+}
+
+static int i2c_pxa_set_master(struct pxa_i2c *i2c)
+{
+	if (i2c_debug)
+		dev_dbg(&i2c->adap.dev, "setting to bus master\n");
+
+	if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
+		dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
+		if (!i2c_pxa_wait_master(i2c)) {
+			dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
+			return I2C_RETRY;
+		}
+	}
+
+	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
+	return 0;
+}
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+static int i2c_pxa_wait_slave(struct pxa_i2c *i2c)
+{
+	unsigned long timeout = jiffies + HZ*1;
+
+	/* wait for stop */
+
+	show_state(i2c);
+
+	while (time_before(jiffies, timeout)) {
+		if (i2c_debug > 1)
+			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
+
+		if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
+		    (readl(_ISR(i2c)) & ISR_SAD) != 0 ||
+		    (readl(_ICR(i2c)) & ICR_SCLE) == 0) {
+			if (i2c_debug > 1)
+				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
+			return 1;
+		}
+
+		msleep(1);
+	}
+
+	if (i2c_debug > 0)
+		dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
+	return 0;
+}
+
+/*
+ * clear the hold on the bus, and take of anything else
+ * that has been configured
+ */
+static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
+{
+	show_state(i2c);
+
+	if (errcode < 0) {
+		udelay(100);   /* simple delay */
+	} else {
+		/* we need to wait for the stop condition to end */
+
+		/* if we where in stop, then clear... */
+		if (readl(_ICR(i2c)) & ICR_STOP) {
+			udelay(100);
+			writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
+		}
+
+		if (!i2c_pxa_wait_slave(i2c)) {
+			dev_err(&i2c->adap.dev, "%s: wait timedout\n",
+				__func__);
+			return;
+		}
+	}
+
+	writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
+
+	if (i2c_debug) {
+		dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
+		decode_ICR(readl(_ICR(i2c)));
+	}
+}
+#else
+#define i2c_pxa_set_slave(i2c, err)	do { } while (0)
+#endif
+
+static void i2c_pxa_reset(struct pxa_i2c *i2c)
+{
+	pr_debug("Resetting I2C Controller Unit\n");
+
+	/* abort any transfer currently under way */
+	i2c_pxa_abort(i2c);
+
+	/* reset according to 9.8 */
+	writel(ICR_UR, _ICR(i2c));
+	writel(I2C_ISR_INIT, _ISR(i2c));
+	writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
+
+	if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
+		writel(i2c->slave_addr, _ISAR(i2c));
+
+	/* set control register values */
+	writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c));
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+	dev_info(&i2c->adap.dev, "Enabling slave mode\n");
+	writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
+#endif
+
+	i2c_pxa_set_slave(i2c, 0);
+
+	/* enable unit */
+	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
+	udelay(100);
+}
+
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+/*
+ * PXA I2C Slave mode
+ */
+
+static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	if (isr & ISR_BED) {
+		/* what should we do here? */
+	} else {
+		int ret = 0;
+
+		if (i2c->slave != NULL)
+			ret = i2c->slave->read(i2c->slave->data);
+
+		writel(ret, _IDBR(i2c));
+		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));   /* allow next byte */
+	}
+}
+
+static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	unsigned int byte = readl(_IDBR(i2c));
+
+	if (i2c->slave != NULL)
+		i2c->slave->write(i2c->slave->data, byte);
+
+	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
+}
+
+static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
+{
+	int timeout;
+
+	if (i2c_debug > 0)
+		dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n",
+		       (isr & ISR_RWM) ? 'r' : 't');
+
+	if (i2c->slave != NULL)
+		i2c->slave->event(i2c->slave->data,
+				 (isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE);
+
+	/*
+	 * slave could interrupt in the middle of us generating a
+	 * start condition... if this happens, we'd better back off
+	 * and stop holding the poor thing up
+	 */
+	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
+
+	timeout = 0x10000;
+
+	while (1) {
+		if ((readl(_IBMR(i2c)) & 2) == 2)
+			break;
+
+		timeout--;
+
+		if (timeout <= 0) {
+			dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
+			break;
+		}
+	}
+
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
+}
+
+static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
+{
+	if (i2c_debug > 2)
+		dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n");
+
+	if (i2c->slave != NULL)
+		i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP);
+
+	if (i2c_debug > 2)
+		dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n");
+
+	/*
+	 * If we have a master-mode message waiting,
+	 * kick it off now that the slave has completed.
+	 */
+	if (i2c->msg)
+		i2c_pxa_master_complete(i2c, I2C_RETRY);
+}
+#else
+static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	if (isr & ISR_BED) {
+		/* what should we do here? */
+	} else {
+		writel(0, _IDBR(i2c));
+		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
+	}
+}
+
+static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
+}
+
+static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
+{
+	int timeout;
+
+	/*
+	 * slave could interrupt in the middle of us generating a
+	 * start condition... if this happens, we'd better back off
+	 * and stop holding the poor thing up
+	 */
+	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
+
+	timeout = 0x10000;
+
+	while (1) {
+		if ((readl(_IBMR(i2c)) & 2) == 2)
+			break;
+
+		timeout--;
+
+		if (timeout <= 0) {
+			dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
+			break;
+		}
+	}
+
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
+}
+
+static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
+{
+	if (i2c->msg)
+		i2c_pxa_master_complete(i2c, I2C_RETRY);
+}
+#endif
+
+/*
+ * PXA I2C Master mode
+ */
+
+static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg)
+{
+	unsigned int addr = (msg->addr & 0x7f) << 1;
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	return addr;
+}
+
+static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
+{
+	u32 icr;
+
+	/*
+	 * Step 1: target slave address into IDBR
+	 */
+	writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
+	i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
+
+	/*
+	 * Step 2: initiate the write.
+	 */
+	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+	writel(icr | ICR_START | ICR_TB, _ICR(i2c));
+}
+
+static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
+{
+	u32 icr;
+
+	/* Clear the START, STOP, ACK, TB and MA flags */
+	icr = readl(_ICR(i2c));
+	icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA);
+	writel(icr, _ICR(i2c));
+}
+
+static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
+{
+	/* make timeout the same as for interrupt based functions */
+	long timeout = 2 * DEF_TIMEOUT;
+
+	/*
+	 * Wait for the bus to become free.
+	 */
+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+		udelay(1000);
+		show_state(i2c);
+	}
+
+	if (timeout < 0) {
+		show_state(i2c);
+		dev_err(&i2c->adap.dev,
+			"i2c_pxa: timeout waiting for bus free\n");
+		return I2C_RETRY;
+	}
+
+	/*
+	 * Set master mode.
+	 */
+	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
+
+	return 0;
+}
+
+/*
+ * PXA I2C send master code
+ * 1. Load master code to IDBR and send it.
+ *    Note for HS mode, set ICR [GPIOEN].
+ * 2. Wait until win arbitration.
+ */
+static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
+{
+	u32 icr;
+	long timeout;
+
+	spin_lock_irq(&i2c->lock);
+	i2c->highmode_enter = true;
+	writel(i2c->master_code, _IDBR(i2c));
+
+	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+	icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE;
+	writel(icr, _ICR(i2c));
+
+	spin_unlock_irq(&i2c->lock);
+	timeout = wait_event_timeout(i2c->wait,
+			i2c->highmode_enter == false, HZ * 1);
+
+	i2c->highmode_enter = false;
+
+	return (timeout == 0) ? I2C_RETRY : 0;
+}
+
+static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
+			       struct i2c_msg *msg, int num)
+{
+	unsigned long timeout = 500000; /* 5 seconds */
+	int ret = 0;
+
+	ret = i2c_pxa_pio_set_master(i2c);
+	if (ret)
+		goto out;
+
+	i2c->msg = msg;
+	i2c->msg_num = num;
+	i2c->msg_idx = 0;
+	i2c->msg_ptr = 0;
+	i2c->irqlogidx = 0;
+
+	i2c_pxa_start_message(i2c);
+
+	while (i2c->msg_num > 0 && --timeout) {
+		i2c_pxa_handler(0, i2c);
+		udelay(10);
+	}
+
+	i2c_pxa_stop_message(i2c);
+
+	/*
+	 * We place the return code in i2c->msg_idx.
+	 */
+	ret = i2c->msg_idx;
+
+out:
+	if (timeout == 0) {
+		i2c_pxa_scream_blue_murder(i2c, "timeout");
+		ret = I2C_RETRY;
+	}
+
+	return ret;
+}
+
+/*
+ * We are protected by the adapter bus mutex.
+ */
+static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
+{
+	long timeout;
+	int ret;
+
+	/*
+	 * Wait for the bus to become free.
+	 */
+	ret = i2c_pxa_wait_bus_not_busy(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
+		goto out;
+	}
+
+	/*
+	 * Set master mode.
+	 */
+	ret = i2c_pxa_set_master(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
+		goto out;
+	}
+
+	if (i2c->high_mode) {
+		ret = i2c_pxa_send_mastercode(i2c);
+		if (ret) {
+			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
+			goto out;
+			}
+	}
+
+	spin_lock_irq(&i2c->lock);
+
+	i2c->msg = msg;
+	i2c->msg_num = num;
+	i2c->msg_idx = 0;
+	i2c->msg_ptr = 0;
+	i2c->irqlogidx = 0;
+
+	i2c_pxa_start_message(i2c);
+
+	spin_unlock_irq(&i2c->lock);
+
+	/*
+	 * The rest of the processing occurs in the interrupt handler.
+	 */
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+	i2c_pxa_stop_message(i2c);
+
+	/*
+	 * We place the return code in i2c->msg_idx.
+	 */
+	ret = i2c->msg_idx;
+
+	if (!timeout && i2c->msg_num) {
+		i2c_pxa_scream_blue_murder(i2c, "timeout");
+		ret = I2C_RETRY;
+	}
+
+ out:
+	return ret;
+}
+
+static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg msgs[], int num)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+	int ret, i;
+
+	/* If the I2C controller is disabled we need to reset it
+	  (probably due to a suspend/resume destroying state). We do
+	  this here as we can then avoid worrying about resuming the
+	  controller before its users. */
+	if (!(readl(_ICR(i2c)) & ICR_IUE))
+		i2c_pxa_reset(i2c);
+
+	for (i = adap->retries; i >= 0; i--) {
+		ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
+		if (ret != I2C_RETRY)
+			goto out;
+
+		if (i2c_debug)
+			dev_dbg(&adap->dev, "Retrying transmission\n");
+		udelay(100);
+	}
+	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
+	ret = -EREMOTEIO;
+ out:
+	i2c_pxa_set_slave(i2c, ret);
+	return ret;
+}
+
+/*
+ * i2c_pxa_master_complete - complete the message and wake up.
+ */
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret)
+{
+	i2c->msg_ptr = 0;
+	i2c->msg = NULL;
+	i2c->msg_idx ++;
+	i2c->msg_num = 0;
+	if (ret)
+		i2c->msg_idx = ret;
+	if (!i2c->use_pio)
+		wake_up(&i2c->wait);
+}
+
+static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+
+ again:
+	/*
+	 * If ISR_ALD is set, we lost arbitration.
+	 */
+	if (isr & ISR_ALD) {
+		/*
+		 * Do we need to do anything here?  The PXA docs
+		 * are vague about what happens.
+		 */
+		i2c_pxa_scream_blue_murder(i2c, "ALD set");
+
+		/*
+		 * We ignore this error.  We seem to see spurious ALDs
+		 * for seemingly no reason.  If we handle them as I think
+		 * they should, we end up causing an I2C error, which
+		 * is painful for some systems.
+		 */
+		return; /* ignore */
+	}
+
+	if ((isr & ISR_BED) &&
+		(!((i2c->msg->flags & I2C_M_IGNORE_NAK) &&
+			(isr & ISR_ACKNAK)))) {
+		int ret = BUS_ERROR;
+
+		/*
+		 * I2C bus error - either the device NAK'd us, or
+		 * something more serious happened.  If we were NAK'd
+		 * on the initial address phase, we can retry.
+		 */
+		if (isr & ISR_ACKNAK) {
+			if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
+				ret = I2C_RETRY;
+			else
+				ret = XFER_NAKED;
+		}
+		i2c_pxa_master_complete(i2c, ret);
+	} else if (isr & ISR_RWM) {
+		/*
+		 * Read mode.  We have just sent the address byte, and
+		 * now we must initiate the transfer.
+		 */
+		if (i2c->msg_ptr == i2c->msg->len - 1 &&
+		    i2c->msg_idx == i2c->msg_num - 1)
+			icr |= ICR_STOP | ICR_ACKNAK;
+
+		icr |= ICR_ALDIE | ICR_TB;
+	} else if (i2c->msg_ptr < i2c->msg->len) {
+		/*
+		 * Write mode.  Write the next data byte.
+		 */
+		writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
+
+		icr |= ICR_ALDIE | ICR_TB;
+
+		/*
+		 * If this is the last byte of the last message or last byte
+		 * of any message with I2C_M_STOP (e.g. SCCB), send a STOP.
+		 */
+		if ((i2c->msg_ptr == i2c->msg->len) &&
+			((i2c->msg->flags & I2C_M_STOP) ||
+			(i2c->msg_idx == i2c->msg_num - 1)))
+				icr |= ICR_STOP;
+
+	} else if (i2c->msg_idx < i2c->msg_num - 1) {
+		/*
+		 * Next segment of the message.
+		 */
+		i2c->msg_ptr = 0;
+		i2c->msg_idx ++;
+		i2c->msg++;
+
+		/*
+		 * If we aren't doing a repeated start and address,
+		 * go back and try to send the next byte.  Note that
+		 * we do not support switching the R/W direction here.
+		 */
+		if (i2c->msg->flags & I2C_M_NOSTART)
+			goto again;
+
+		/*
+		 * Write the next address.
+		 */
+		writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
+		i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
+
+		/*
+		 * And trigger a repeated start, and send the byte.
+		 */
+		icr &= ~ICR_ALDIE;
+		icr |= ICR_START | ICR_TB;
+	} else {
+		if (i2c->msg->len == 0) {
+			/*
+			 * Device probes have a message length of zero
+			 * and need the bus to be reset before it can
+			 * be used again.
+			 */
+			i2c_pxa_reset(i2c);
+		}
+		i2c_pxa_master_complete(i2c, 0);
+	}
+
+	i2c->icrlog[i2c->irqlogidx-1] = icr;
+
+	writel(icr, _ICR(i2c));
+	show_state(i2c);
+}
+
+static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+
+	/*
+	 * Read the byte.
+	 */
+	i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
+
+	if (i2c->msg_ptr < i2c->msg->len) {
+		/*
+		 * If this is the last byte of the last
+		 * message, send a STOP.
+		 */
+		if (i2c->msg_ptr == i2c->msg->len - 1)
+			icr |= ICR_STOP | ICR_ACKNAK;
+
+		icr |= ICR_ALDIE | ICR_TB;
+	} else {
+		i2c_pxa_master_complete(i2c, 0);
+	}
+
+	i2c->icrlog[i2c->irqlogidx-1] = icr;
+
+	writel(icr, _ICR(i2c));
+}
+
+#define VALID_INT_SOURCE	(ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
+				ISR_SAD | ISR_BED)
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
+{
+	struct pxa_i2c *i2c = dev_id;
+	u32 isr = readl(_ISR(i2c));
+
+	if (!(isr & VALID_INT_SOURCE))
+		return IRQ_NONE;
+
+	if (i2c_debug > 2 && 0) {
+		dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+			__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
+		decode_ISR(isr);
+	}
+
+	if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog))
+		i2c->isrlog[i2c->irqlogidx++] = isr;
+
+	show_state(i2c);
+
+	/*
+	 * Always clear all pending IRQs.
+	 */
+	writel(isr & VALID_INT_SOURCE, _ISR(i2c));
+
+	if (isr & ISR_SAD)
+		i2c_pxa_slave_start(i2c, isr);
+	if (isr & ISR_SSD)
+		i2c_pxa_slave_stop(i2c);
+
+	if (i2c_pxa_is_slavemode(i2c)) {
+		if (isr & ISR_ITE)
+			i2c_pxa_slave_txempty(i2c, isr);
+		if (isr & ISR_IRF)
+			i2c_pxa_slave_rxfull(i2c, isr);
+	} else if (i2c->msg && (!i2c->highmode_enter)) {
+		if (isr & ISR_ITE)
+			i2c_pxa_irq_txempty(i2c, isr);
+		if (isr & ISR_IRF)
+			i2c_pxa_irq_rxfull(i2c, isr);
+	} else if ((isr & ISR_ITE) && i2c->highmode_enter) {
+		i2c->highmode_enter = false;
+		wake_up(&i2c->wait);
+	} else {
+		i2c_pxa_scream_blue_murder(i2c, "spurious irq");
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+	int ret, i;
+
+	for (i = adap->retries; i >= 0; i--) {
+		ret = i2c_pxa_do_xfer(i2c, msgs, num);
+		if (ret != I2C_RETRY)
+			goto out;
+
+		if (i2c_debug)
+			dev_dbg(&adap->dev, "Retrying transmission\n");
+		udelay(100);
+	}
+	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
+	ret = -EREMOTEIO;
+ out:
+	i2c_pxa_set_slave(i2c, ret);
+	return ret;
+}
+
+static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+		I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm i2c_pxa_algorithm = {
+	.master_xfer	= i2c_pxa_xfer,
+	.functionality	= i2c_pxa_functionality,
+};
+
+static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
+	.master_xfer	= i2c_pxa_pio_xfer,
+	.functionality	= i2c_pxa_functionality,
+};
+
+static const struct of_device_id i2c_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
+	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
+	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
+	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+			    enum pxa_i2c_types *i2c_types)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(i2c_pxa_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 1;
+
+	/* For device tree we always use the dynamic or alias-assigned ID */
+	i2c->adap.nr = -1;
+
+	if (of_get_property(np, "mrvl,i2c-polling", NULL))
+		i2c->use_pio = 1;
+	if (of_get_property(np, "mrvl,i2c-fast-mode", NULL))
+		i2c->fast_mode = 1;
+
+	*i2c_types = (enum pxa_i2c_types)(of_id->data);
+
+	return 0;
+}
+
+static int i2c_pxa_probe_pdata(struct platform_device *pdev,
+			       struct pxa_i2c *i2c,
+			       enum pxa_i2c_types *i2c_types)
+{
+	struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+
+	*i2c_types = id->driver_data;
+	if (plat) {
+		i2c->use_pio = plat->use_pio;
+		i2c->fast_mode = plat->fast_mode;
+		i2c->high_mode = plat->high_mode;
+		i2c->master_code = plat->master_code;
+		if (!i2c->master_code)
+			i2c->master_code = 0xe;
+		i2c->rate = plat->rate;
+	}
+	return 0;
+}
+
+static int i2c_pxa_probe(struct platform_device *dev)
+{
+	struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
+	enum pxa_i2c_types i2c_type;
+	struct pxa_i2c *i2c;
+	struct resource *res = NULL;
+	int ret, irq;
+
+	i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(i2c->reg_base))
+		return PTR_ERR(i2c->reg_base);
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "no irq resource: %d\n", irq);
+		return irq;
+	}
+
+	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
+	i2c->adap.nr = dev->id;
+
+	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
+	if (ret > 0)
+		ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
+	if (ret < 0)
+		return ret;
+
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.retries = 5;
+
+	spin_lock_init(&i2c->lock);
+	init_waitqueue_head(&i2c->wait);
+
+	strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
+
+	i2c->clk = devm_clk_get(&dev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
+		return PTR_ERR(i2c->clk);
+	}
+
+	i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
+	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
+	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
+	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
+	i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM;
+	i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS;
+
+	if (i2c_type != REGS_CE4100)
+		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
+
+	if (i2c_type == REGS_PXA910) {
+		i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr;
+		i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr;
+	}
+
+	i2c->iobase = res->start;
+	i2c->iosize = resource_size(res);
+
+	i2c->irq = irq;
+
+	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
+	i2c->highmode_enter = false;
+
+	if (plat) {
+#ifdef CONFIG_I2C_PXA_SLAVE
+		i2c->slave_addr = plat->slave_addr;
+		i2c->slave = plat->slave;
+#endif
+		i2c->adap.class = plat->class;
+	}
+
+	if (i2c->high_mode) {
+		if (i2c->rate) {
+			clk_set_rate(i2c->clk, i2c->rate);
+			pr_info("i2c: <%s> set rate to %ld\n",
+				i2c->adap.name, clk_get_rate(i2c->clk));
+		} else
+			pr_warn("i2c: <%s> clock rate not set\n",
+				i2c->adap.name);
+	}
+
+	clk_prepare_enable(i2c->clk);
+
+	if (i2c->use_pio) {
+		i2c->adap.algo = &i2c_pxa_pio_algorithm;
+	} else {
+		i2c->adap.algo = &i2c_pxa_algorithm;
+		ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
+				IRQF_SHARED | IRQF_NO_SUSPEND,
+				dev_name(&dev->dev), i2c);
+		if (ret) {
+			dev_err(&dev->dev, "failed to request irq: %d\n", ret);
+			goto ereqirq;
+		}
+	}
+
+	i2c_pxa_reset(i2c);
+
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &dev->dev;
+#ifdef CONFIG_OF
+	i2c->adap.dev.of_node = dev->dev.of_node;
+#endif
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret < 0)
+		goto ereqirq;
+
+	platform_set_drvdata(dev, i2c);
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+	dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n",
+		i2c->slave_addr);
+#else
+	dev_info(&i2c->adap.dev, " PXA I2C adapter\n");
+#endif
+	return 0;
+
+ereqirq:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int i2c_pxa_remove(struct platform_device *dev)
+{
+	struct pxa_i2c *i2c = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_pxa_suspend_noirq(struct device *dev)
+{
+	struct pxa_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_disable(i2c->clk);
+
+	return 0;
+}
+
+static int i2c_pxa_resume_noirq(struct device *dev)
+{
+	struct pxa_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_enable(i2c->clk);
+	i2c_pxa_reset(i2c);
+
+	return 0;
+}
+
+static const struct dev_pm_ops i2c_pxa_dev_pm_ops = {
+	.suspend_noirq = i2c_pxa_suspend_noirq,
+	.resume_noirq = i2c_pxa_resume_noirq,
+};
+
+#define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops)
+#else
+#define I2C_PXA_DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver i2c_pxa_driver = {
+	.probe		= i2c_pxa_probe,
+	.remove		= i2c_pxa_remove,
+	.driver		= {
+		.name	= "pxa2xx-i2c",
+		.pm	= I2C_PXA_DEV_PM_OPS,
+		.of_match_table = i2c_pxa_dt_ids,
+	},
+	.id_table	= i2c_pxa_id_table,
+};
+
+static int __init i2c_adap_pxa_init(void)
+{
+	return platform_driver_register(&i2c_pxa_driver);
+}
+
+static void __exit i2c_adap_pxa_exit(void)
+{
+	platform_driver_unregister(&i2c_pxa_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-i2c");
+
+subsys_initcall(i2c_adap_pxa_init);
+module_exit(i2c_adap_pxa_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-qup.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-qup.c
new file mode 100644
index 0000000..8f6903e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-qup.c
@@ -0,0 +1,1733 @@
+/*
+ * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
+
+/* QUP Registers */
+#define QUP_CONFIG		0x000
+#define QUP_STATE		0x004
+#define QUP_IO_MODE		0x008
+#define QUP_SW_RESET		0x00c
+#define QUP_OPERATIONAL		0x018
+#define QUP_ERROR_FLAGS		0x01c
+#define QUP_ERROR_FLAGS_EN	0x020
+#define QUP_OPERATIONAL_MASK	0x028
+#define QUP_HW_VERSION		0x030
+#define QUP_MX_OUTPUT_CNT	0x100
+#define QUP_OUT_FIFO_BASE	0x110
+#define QUP_MX_WRITE_CNT	0x150
+#define QUP_MX_INPUT_CNT	0x200
+#define QUP_MX_READ_CNT		0x208
+#define QUP_IN_FIFO_BASE	0x218
+#define QUP_I2C_CLK_CTL		0x400
+#define QUP_I2C_STATUS		0x404
+#define QUP_I2C_MASTER_GEN	0x408
+
+/* QUP States and reset values */
+#define QUP_RESET_STATE		0
+#define QUP_RUN_STATE		1
+#define QUP_PAUSE_STATE		3
+#define QUP_STATE_MASK		3
+
+#define QUP_STATE_VALID		BIT(2)
+#define QUP_I2C_MAST_GEN	BIT(4)
+#define QUP_I2C_FLUSH		BIT(6)
+
+#define QUP_OPERATIONAL_RESET	0x000ff0
+#define QUP_I2C_STATUS_RESET	0xfffffc
+
+/* QUP OPERATIONAL FLAGS */
+#define QUP_I2C_NACK_FLAG	BIT(3)
+#define QUP_OUT_NOT_EMPTY	BIT(4)
+#define QUP_IN_NOT_EMPTY	BIT(5)
+#define QUP_OUT_FULL		BIT(6)
+#define QUP_OUT_SVC_FLAG	BIT(8)
+#define QUP_IN_SVC_FLAG		BIT(9)
+#define QUP_MX_OUTPUT_DONE	BIT(10)
+#define QUP_MX_INPUT_DONE	BIT(11)
+
+/* I2C mini core related values */
+#define QUP_CLOCK_AUTO_GATE	BIT(13)
+#define I2C_MINI_CORE		(2 << 8)
+#define I2C_N_VAL		15
+#define I2C_N_VAL_V2		7
+
+/* Most significant word offset in FIFO port */
+#define QUP_MSW_SHIFT		(I2C_N_VAL + 1)
+
+/* Packing/Unpacking words in FIFOs, and IO modes */
+#define QUP_OUTPUT_BLK_MODE	(1 << 10)
+#define QUP_OUTPUT_BAM_MODE	(3 << 10)
+#define QUP_INPUT_BLK_MODE	(1 << 12)
+#define QUP_INPUT_BAM_MODE	(3 << 12)
+#define QUP_BAM_MODE		(QUP_OUTPUT_BAM_MODE | QUP_INPUT_BAM_MODE)
+#define QUP_UNPACK_EN		BIT(14)
+#define QUP_PACK_EN		BIT(15)
+
+#define QUP_REPACK_EN		(QUP_UNPACK_EN | QUP_PACK_EN)
+#define QUP_V2_TAGS_EN		1
+
+#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
+#define QUP_OUTPUT_FIFO_SIZE(x)	(((x) >> 2) & 0x07)
+#define QUP_INPUT_BLOCK_SIZE(x)	(((x) >> 5) & 0x03)
+#define QUP_INPUT_FIFO_SIZE(x)	(((x) >> 7) & 0x07)
+
+/* QUP tags */
+#define QUP_TAG_START		(1 << 8)
+#define QUP_TAG_DATA		(2 << 8)
+#define QUP_TAG_STOP		(3 << 8)
+#define QUP_TAG_REC		(4 << 8)
+#define QUP_BAM_INPUT_EOT		0x93
+#define QUP_BAM_FLUSH_STOP		0x96
+
+/* QUP v2 tags */
+#define QUP_TAG_V2_START               0x81
+#define QUP_TAG_V2_DATAWR              0x82
+#define QUP_TAG_V2_DATAWR_STOP         0x83
+#define QUP_TAG_V2_DATARD              0x85
+#define QUP_TAG_V2_DATARD_STOP         0x87
+
+/* Status, Error flags */
+#define I2C_STATUS_WR_BUFFER_FULL	BIT(0)
+#define I2C_STATUS_BUS_ACTIVE		BIT(8)
+#define I2C_STATUS_ERROR_MASK		0x38000fc
+#define QUP_STATUS_ERROR_FLAGS		0x7c
+
+#define QUP_READ_LIMIT			256
+#define SET_BIT				0x1
+#define RESET_BIT			0x0
+#define ONE_BYTE			0x1
+#define QUP_I2C_MX_CONFIG_DURING_RUN   BIT(31)
+
+#define MX_TX_RX_LEN			SZ_64K
+#define MX_BLOCKS			(MX_TX_RX_LEN / QUP_READ_LIMIT)
+
+/* Max timeout in ms for 32k bytes */
+#define TOUT_MAX			300
+
+/* Default values. Use these if FW query fails */
+#define DEFAULT_CLK_FREQ 100000
+#define DEFAULT_SRC_CLK 20000000
+
+struct qup_i2c_block {
+	int	count;
+	int	pos;
+	int	tx_tag_len;
+	int	rx_tag_len;
+	int	data_len;
+	u8	tags[6];
+};
+
+struct qup_i2c_tag {
+	u8 *start;
+	dma_addr_t addr;
+};
+
+struct qup_i2c_bam {
+	struct	qup_i2c_tag tag;
+	struct	dma_chan *dma;
+	struct	scatterlist *sg;
+};
+
+struct qup_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq;
+	struct clk		*clk;
+	struct clk		*pclk;
+	struct i2c_adapter	adap;
+
+	int			clk_ctl;
+	int			out_fifo_sz;
+	int			in_fifo_sz;
+	int			out_blk_sz;
+	int			in_blk_sz;
+
+	unsigned long		one_byte_t;
+	struct qup_i2c_block	blk;
+
+	struct i2c_msg		*msg;
+	/* Current posion in user message buffer */
+	int			pos;
+	/* I2C protocol errors */
+	u32			bus_err;
+	/* QUP core errors */
+	u32			qup_err;
+
+	/* To check if this is the last msg */
+	bool			is_last;
+
+	/* To configure when bus is in run state */
+	int			config_run;
+
+	/* dma parameters */
+	bool			is_dma;
+	struct			dma_pool *dpool;
+	struct			qup_i2c_tag start_tag;
+	struct			qup_i2c_bam brx;
+	struct			qup_i2c_bam btx;
+
+	struct completion	xfer;
+};
+
+static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
+{
+	struct qup_i2c_dev *qup = dev;
+	u32 bus_err;
+	u32 qup_err;
+	u32 opflags;
+
+	bus_err = readl(qup->base + QUP_I2C_STATUS);
+	qup_err = readl(qup->base + QUP_ERROR_FLAGS);
+	opflags = readl(qup->base + QUP_OPERATIONAL);
+
+	if (!qup->msg) {
+		/* Clear Error interrupt */
+		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+		return IRQ_HANDLED;
+	}
+
+	bus_err &= I2C_STATUS_ERROR_MASK;
+	qup_err &= QUP_STATUS_ERROR_FLAGS;
+
+	/* Clear the error bits in QUP_ERROR_FLAGS */
+	if (qup_err)
+		writel(qup_err, qup->base + QUP_ERROR_FLAGS);
+
+	/* Clear the error bits in QUP_I2C_STATUS */
+	if (bus_err)
+		writel(bus_err, qup->base + QUP_I2C_STATUS);
+
+	/* Reset the QUP State in case of error */
+	if (qup_err || bus_err) {
+		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+		goto done;
+	}
+
+	if (opflags & QUP_IN_SVC_FLAG)
+		writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+	if (opflags & QUP_OUT_SVC_FLAG)
+		writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+done:
+	qup->qup_err = qup_err;
+	qup->bus_err = bus_err;
+	complete(&qup->xfer);
+	return IRQ_HANDLED;
+}
+
+static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
+				   u32 req_state, u32 req_mask)
+{
+	int retries = 1;
+	u32 state;
+
+	/*
+	 * State transition takes 3 AHB clocks cycles + 3 I2C master clock
+	 * cycles. So retry once after a 1uS delay.
+	 */
+	do {
+		state = readl(qup->base + QUP_STATE);
+
+		if (state & QUP_STATE_VALID &&
+		    (state & req_mask) == req_state)
+			return 0;
+
+		udelay(1);
+	} while (retries--);
+
+	return -ETIMEDOUT;
+}
+
+static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
+{
+	return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
+}
+
+static void qup_i2c_flush(struct qup_i2c_dev *qup)
+{
+	u32 val = readl(qup->base + QUP_STATE);
+
+	val |= QUP_I2C_FLUSH;
+	writel(val, qup->base + QUP_STATE);
+}
+
+static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
+{
+	return qup_i2c_poll_state_mask(qup, 0, 0);
+}
+
+static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
+{
+	return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
+}
+
+static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
+{
+	if (qup_i2c_poll_state_valid(qup) != 0)
+		return -EIO;
+
+	writel(state, qup->base + QUP_STATE);
+
+	if (qup_i2c_poll_state(qup, state) != 0)
+		return -EIO;
+	return 0;
+}
+
+/**
+ * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path
+ * @qup: The qup_i2c_dev device
+ * @op: The bit/event to wait on
+ * @val: value of the bit to wait on, 0 or 1
+ * @len: The length the bytes to be transferred
+ */
+static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
+			      int len)
+{
+	unsigned long timeout;
+	u32 opflags;
+	u32 status;
+	u32 shift = __ffs(op);
+	int ret = 0;
+
+	len *= qup->one_byte_t;
+	/* timeout after a wait of twice the max time */
+	timeout = jiffies + len * 4;
+
+	for (;;) {
+		opflags = readl(qup->base + QUP_OPERATIONAL);
+		status = readl(qup->base + QUP_I2C_STATUS);
+
+		if (((opflags & op) >> shift) == val) {
+			if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
+				if (!(status & I2C_STATUS_BUS_ACTIVE)) {
+					ret = 0;
+					goto done;
+				}
+			} else {
+				ret = 0;
+				goto done;
+			}
+		}
+
+		if (time_after(jiffies, timeout)) {
+			ret = -ETIMEDOUT;
+			goto done;
+		}
+		usleep_range(len, len * 2);
+	}
+
+done:
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+	return ret;
+}
+
+static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
+				      struct i2c_msg *msg)
+{
+	/* Number of entries to shift out, including the tags */
+	int total = msg->len + qup->blk.tx_tag_len;
+
+	total |= qup->config_run;
+
+	if (total < qup->out_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_WRITE_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_OUTPUT_CNT);
+	}
+}
+
+static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	/* Number of entries to shift out, including the start */
+	int total = msg->len + 1;
+
+	if (total < qup->out_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_WRITE_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_OUTPUT_CNT);
+	}
+}
+
+static int check_for_fifo_space(struct qup_i2c_dev *qup)
+{
+	int ret;
+
+	ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+	if (ret)
+		goto out;
+
+	ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL,
+				 RESET_BIT, 4 * ONE_BYTE);
+	if (ret) {
+		/* Fifo is full. Drain out the fifo */
+		ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+		if (ret)
+			goto out;
+
+		ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY,
+					 RESET_BIT, 256 * ONE_BYTE);
+		if (ret) {
+			dev_err(qup->dev, "timeout for fifo out full");
+			goto out;
+		}
+
+		ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+		if (ret)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+
+static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 addr = msg->addr << 1;
+	u32 qup_tag;
+	int idx;
+	u32 val;
+	int ret = 0;
+
+	if (qup->pos == 0) {
+		val = QUP_TAG_START | addr;
+		idx = 1;
+	} else {
+		val = 0;
+		idx = 0;
+	}
+
+	while (qup->pos < msg->len) {
+		/* Check that there's space in the FIFO for our pair */
+		ret = check_for_fifo_space(qup);
+		if (ret)
+			return ret;
+
+		if (qup->pos == msg->len - 1)
+			qup_tag = QUP_TAG_STOP;
+		else
+			qup_tag = QUP_TAG_DATA;
+
+		if (idx & 1)
+			val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
+		else
+			val = qup_tag | msg->buf[qup->pos];
+
+		/* Write out the pair and the last odd value */
+		if (idx & 1 || qup->pos == msg->len - 1)
+			writel(val, qup->base + QUP_OUT_FIFO_BASE);
+
+		qup->pos++;
+		idx++;
+	}
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+
+	return ret;
+}
+
+static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup,
+				 struct i2c_msg *msg)
+{
+	memset(&qup->blk, 0, sizeof(qup->blk));
+
+	qup->blk.data_len = msg->len;
+	qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT;
+
+	/* 4 bytes for first block and 2 writes for rest */
+	qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2;
+
+	/* There are 2 tag bytes that are read in to fifo for every block */
+	if (msg->flags & I2C_M_RD)
+		qup->blk.rx_tag_len = qup->blk.count * 2;
+}
+
+static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf,
+			     int dlen, u8 *dbuf)
+{
+	u32 val = 0, idx = 0, pos = 0, i = 0, t;
+	int  len = tlen + dlen;
+	u8 *buf = tbuf;
+	int ret = 0;
+
+	while (len > 0) {
+		ret = check_for_fifo_space(qup);
+		if (ret)
+			return ret;
+
+		t = (len >= 4) ? 4 : len;
+
+		while (idx < t) {
+			if (!i && (pos >= tlen)) {
+				buf = dbuf;
+				pos = 0;
+				i = 1;
+			}
+			val |= buf[pos++] << (idx++ * 8);
+		}
+
+		writel(val, qup->base + QUP_OUT_FIFO_BASE);
+		idx  = 0;
+		val = 0;
+		len -= 4;
+	}
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+
+	return ret;
+}
+
+static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
+{
+	int data_len;
+
+	if (qup->blk.data_len > QUP_READ_LIMIT)
+		data_len = QUP_READ_LIMIT;
+	else
+		data_len = qup->blk.data_len;
+
+	return data_len;
+}
+
+static bool qup_i2c_check_msg_len(struct i2c_msg *msg)
+{
+	return ((msg->flags & I2C_M_RD) && (msg->flags & I2C_M_RECV_LEN));
+}
+
+static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup,
+			struct i2c_msg *msg)
+{
+	int len = 0;
+
+	if (msg->len > 1) {
+		tags[len++] = QUP_TAG_V2_DATARD_STOP;
+		tags[len++] = qup_i2c_get_data_len(qup) - 1;
+	} else {
+		tags[len++] = QUP_TAG_V2_START;
+		tags[len++] = addr & 0xff;
+
+		if (msg->flags & I2C_M_TEN)
+			tags[len++] = addr >> 8;
+
+		tags[len++] = QUP_TAG_V2_DATARD;
+		/* Read 1 byte indicating the length of the SMBus message */
+		tags[len++] = 1;
+	}
+	return len;
+}
+
+static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
+			    struct i2c_msg *msg,  int is_dma)
+{
+	u16 addr = i2c_8bit_addr_from_msg(msg);
+	int len = 0;
+	int data_len;
+
+	int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last);
+
+	/* Handle tags for SMBus block read */
+	if (qup_i2c_check_msg_len(msg))
+		return qup_i2c_set_tags_smb(addr, tags, qup, msg);
+
+	if (qup->blk.pos == 0) {
+		tags[len++] = QUP_TAG_V2_START;
+		tags[len++] = addr & 0xff;
+
+		if (msg->flags & I2C_M_TEN)
+			tags[len++] = addr >> 8;
+	}
+
+	/* Send _STOP commands for the last block */
+	if (last) {
+		if (msg->flags & I2C_M_RD)
+			tags[len++] = QUP_TAG_V2_DATARD_STOP;
+		else
+			tags[len++] = QUP_TAG_V2_DATAWR_STOP;
+	} else {
+		if (msg->flags & I2C_M_RD)
+			tags[len++] = QUP_TAG_V2_DATARD;
+		else
+			tags[len++] = QUP_TAG_V2_DATAWR;
+	}
+
+	data_len = qup_i2c_get_data_len(qup);
+
+	/* 0 implies 256 bytes */
+	if (data_len == QUP_READ_LIMIT)
+		tags[len++] = 0;
+	else
+		tags[len++] = data_len;
+
+	if ((msg->flags & I2C_M_RD) && last && is_dma) {
+		tags[len++] = QUP_BAM_INPUT_EOT;
+		tags[len++] = QUP_BAM_FLUSH_STOP;
+	}
+
+	return len;
+}
+
+static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	int data_len = 0, tag_len, index;
+	int ret;
+
+	tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
+	index = msg->len - qup->blk.data_len;
+
+	/* only tags are written for read */
+	if (!(msg->flags & I2C_M_RD))
+		data_len = qup_i2c_get_data_len(qup);
+
+	ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags,
+				data_len, &msg->buf[index]);
+	qup->blk.data_len -= data_len;
+
+	return ret;
+}
+
+static void qup_i2c_bam_cb(void *data)
+{
+	struct qup_i2c_dev *qup = data;
+
+	complete(&qup->xfer);
+}
+
+static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
+			  unsigned int buflen, struct qup_i2c_dev *qup,
+			  int dir)
+{
+	int ret;
+
+	sg_set_buf(sg, buf, buflen);
+	ret = dma_map_sg(qup->dev, sg, 1, dir);
+	if (!ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void qup_i2c_rel_dma(struct qup_i2c_dev *qup)
+{
+	if (qup->btx.dma)
+		dma_release_channel(qup->btx.dma);
+	if (qup->brx.dma)
+		dma_release_channel(qup->brx.dma);
+	qup->btx.dma = NULL;
+	qup->brx.dma = NULL;
+}
+
+static int qup_i2c_req_dma(struct qup_i2c_dev *qup)
+{
+	int err;
+
+	if (!qup->btx.dma) {
+		qup->btx.dma = dma_request_slave_channel_reason(qup->dev, "tx");
+		if (IS_ERR(qup->btx.dma)) {
+			err = PTR_ERR(qup->btx.dma);
+			qup->btx.dma = NULL;
+			dev_err(qup->dev, "\n tx channel not available");
+			return err;
+		}
+	}
+
+	if (!qup->brx.dma) {
+		qup->brx.dma = dma_request_slave_channel_reason(qup->dev, "rx");
+		if (IS_ERR(qup->brx.dma)) {
+			dev_err(qup->dev, "\n rx channel not available");
+			err = PTR_ERR(qup->brx.dma);
+			qup->brx.dma = NULL;
+			qup_i2c_rel_dma(qup);
+			return err;
+		}
+	}
+	return 0;
+}
+
+static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
+			       int num)
+{
+	struct dma_async_tx_descriptor *txd, *rxd = NULL;
+	int ret = 0, idx = 0, limit = QUP_READ_LIMIT;
+	dma_cookie_t cookie_rx, cookie_tx;
+	u32 rx_nents = 0, tx_nents = 0, len, blocks, rem;
+	u32 i, tlen, tx_len, tx_buf = 0, rx_buf = 0, off = 0;
+	u8 *tags;
+
+	while (idx < num) {
+		tx_len = 0, len = 0, i = 0;
+
+		qup->is_last = (idx == (num - 1));
+
+		qup_i2c_set_blk_data(qup, msg);
+
+		blocks = qup->blk.count;
+		rem = msg->len - (blocks - 1) * limit;
+
+		if (msg->flags & I2C_M_RD) {
+			rx_nents += (blocks * 2) + 1;
+			tx_nents += 1;
+
+			while (qup->blk.pos < blocks) {
+				tlen = (i == (blocks - 1)) ? rem : limit;
+				tags = &qup->start_tag.start[off + len];
+				len += qup_i2c_set_tags(tags, qup, msg, 1);
+				qup->blk.data_len -= tlen;
+
+				/* scratch buf to read the start and len tags */
+				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+						     &qup->brx.tag.start[0],
+						     2, qup, DMA_FROM_DEVICE);
+
+				if (ret)
+					return ret;
+
+				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+						     &msg->buf[limit * i],
+						     tlen, qup,
+						     DMA_FROM_DEVICE);
+				if (ret)
+					return ret;
+
+				i++;
+				qup->blk.pos = i;
+			}
+			ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+					     &qup->start_tag.start[off],
+					     len, qup, DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+
+			off += len;
+			/* scratch buf to read the BAM EOT and FLUSH tags */
+			ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+					     &qup->brx.tag.start[0],
+					     2, qup, DMA_FROM_DEVICE);
+			if (ret)
+				return ret;
+		} else {
+			tx_nents += (blocks * 2);
+
+			while (qup->blk.pos < blocks) {
+				tlen = (i == (blocks - 1)) ? rem : limit;
+				tags = &qup->start_tag.start[off + tx_len];
+				len = qup_i2c_set_tags(tags, qup, msg, 1);
+				qup->blk.data_len -= tlen;
+
+				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+						     tags, len,
+						     qup, DMA_TO_DEVICE);
+				if (ret)
+					return ret;
+
+				tx_len += len;
+				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+						     &msg->buf[limit * i],
+						     tlen, qup, DMA_TO_DEVICE);
+				if (ret)
+					return ret;
+				i++;
+				qup->blk.pos = i;
+			}
+			off += tx_len;
+
+			if (idx == (num - 1)) {
+				len = 1;
+				if (rx_nents) {
+					qup->btx.tag.start[0] =
+							QUP_BAM_INPUT_EOT;
+					len++;
+				}
+				qup->btx.tag.start[len - 1] =
+							QUP_BAM_FLUSH_STOP;
+				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+						     &qup->btx.tag.start[0],
+						     len, qup, DMA_TO_DEVICE);
+				if (ret)
+					return ret;
+				tx_nents += 1;
+			}
+		}
+		idx++;
+		msg++;
+	}
+
+	txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_nents,
+				      DMA_MEM_TO_DEV,
+				      DMA_PREP_INTERRUPT | DMA_PREP_FENCE);
+	if (!txd) {
+		dev_err(qup->dev, "failed to get tx desc\n");
+		ret = -EINVAL;
+		goto desc_err;
+	}
+
+	if (!rx_nents) {
+		txd->callback = qup_i2c_bam_cb;
+		txd->callback_param = qup;
+	}
+
+	cookie_tx = dmaengine_submit(txd);
+	if (dma_submit_error(cookie_tx)) {
+		ret = -EINVAL;
+		goto desc_err;
+	}
+
+	dma_async_issue_pending(qup->btx.dma);
+
+	if (rx_nents) {
+		rxd = dmaengine_prep_slave_sg(qup->brx.dma, qup->brx.sg,
+					      rx_nents, DMA_DEV_TO_MEM,
+					      DMA_PREP_INTERRUPT);
+		if (!rxd) {
+			dev_err(qup->dev, "failed to get rx desc\n");
+			ret = -EINVAL;
+
+			/* abort TX descriptors */
+			dmaengine_terminate_all(qup->btx.dma);
+			goto desc_err;
+		}
+
+		rxd->callback = qup_i2c_bam_cb;
+		rxd->callback_param = qup;
+		cookie_rx = dmaengine_submit(rxd);
+		if (dma_submit_error(cookie_rx)) {
+			ret = -EINVAL;
+			goto desc_err;
+		}
+
+		dma_async_issue_pending(qup->brx.dma);
+	}
+
+	if (!wait_for_completion_timeout(&qup->xfer, TOUT_MAX * HZ)) {
+		dev_err(qup->dev, "normal trans timed out\n");
+		ret = -ETIMEDOUT;
+	}
+
+	if (ret || qup->bus_err || qup->qup_err) {
+		reinit_completion(&qup->xfer);
+
+		if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+			dev_err(qup->dev, "change to run state timed out");
+			goto desc_err;
+		}
+
+		if (rx_nents)
+			writel(QUP_BAM_INPUT_EOT,
+			       qup->base + QUP_OUT_FIFO_BASE);
+
+		writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
+
+		qup_i2c_flush(qup);
+
+		/* wait for remaining interrupts to occur */
+		if (!wait_for_completion_timeout(&qup->xfer, HZ))
+			dev_err(qup->dev, "flush timed out\n");
+
+		qup_i2c_rel_dma(qup);
+
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+	}
+
+desc_err:
+	dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
+
+	if (rx_nents)
+		dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
+			     DMA_FROM_DEVICE);
+
+	return ret;
+}
+
+static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+			    int num)
+{
+	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+	int ret = 0;
+
+	enable_irq(qup->irq);
+	ret = qup_i2c_req_dma(qup);
+
+	if (ret)
+		goto out;
+
+	writel(0, qup->base + QUP_MX_INPUT_CNT);
+	writel(0, qup->base + QUP_MX_OUTPUT_CNT);
+
+	/* set BAM mode */
+	writel(QUP_REPACK_EN | QUP_BAM_MODE, qup->base + QUP_IO_MODE);
+
+	/* mask fifo irqs */
+	writel((0x3 << 8), qup->base + QUP_OPERATIONAL_MASK);
+
+	/* set RUN STATE */
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto out;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	qup->msg = msg;
+	ret = qup_i2c_bam_do_xfer(qup, qup->msg, num);
+out:
+	disable_irq(qup->irq);
+
+	qup->msg = NULL;
+	return ret;
+}
+
+static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
+				     struct i2c_msg *msg)
+{
+	unsigned long left;
+	int ret = 0;
+
+	left = wait_for_completion_timeout(&qup->xfer, HZ);
+	if (!left) {
+		writel(1, qup->base + QUP_SW_RESET);
+		ret = -ETIMEDOUT;
+	}
+
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+	return ret;
+}
+
+static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	int ret = 0;
+
+	qup->msg = msg;
+	qup->pos = 0;
+	enable_irq(qup->irq);
+	qup_i2c_set_blk_data(qup, msg);
+	qup_i2c_set_write_mode_v2(qup, msg);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	do {
+		ret = qup_i2c_issue_xfer_v2(qup, msg);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_wait_for_complete(qup, msg);
+		if (ret)
+			goto err;
+
+		qup->blk.pos++;
+	} while (qup->blk.pos < qup->blk.count);
+
+	ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
+
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	int ret;
+
+	qup->msg = msg;
+	qup->pos = 0;
+
+	enable_irq(qup->irq);
+
+	qup_i2c_set_write_mode(qup, msg);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	do {
+		ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_issue_write(qup, msg);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_wait_for_complete(qup, msg);
+		if (ret)
+			goto err;
+	} while (qup->pos < msg->len);
+
+	/* Wait for the outstanding data in the fifo to drain */
+	ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
+{
+	if (len < qup->in_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(len, qup->base + QUP_MX_READ_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(len, qup->base + QUP_MX_INPUT_CNT);
+	}
+}
+
+static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len)
+{
+	int tx_len = qup->blk.tx_tag_len;
+
+	len += qup->blk.rx_tag_len;
+	len |= qup->config_run;
+	tx_len |= qup->config_run;
+
+	if (len < qup->in_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(tx_len, qup->base + QUP_MX_WRITE_CNT);
+		writel(len, qup->base + QUP_MX_READ_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT);
+		writel(len, qup->base + QUP_MX_INPUT_CNT);
+	}
+}
+
+static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 addr, len, val;
+
+	addr = i2c_8bit_addr_from_msg(msg);
+
+	/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
+	len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
+
+	val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
+	writel(val, qup->base + QUP_OUT_FIFO_BASE);
+}
+
+
+static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 val = 0;
+	int idx;
+	int ret = 0;
+
+	for (idx = 0; qup->pos < msg->len; idx++) {
+		if ((idx & 1) == 0) {
+			/* Check that FIFO have data */
+			ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
+						 SET_BIT, 4 * ONE_BYTE);
+			if (ret)
+				return ret;
+
+			/* Reading 2 words at time */
+			val = readl(qup->base + QUP_IN_FIFO_BASE);
+
+			msg->buf[qup->pos++] = val & 0xFF;
+		} else {
+			msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
+		}
+	}
+
+	return ret;
+}
+
+static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
+				struct i2c_msg *msg)
+{
+	u32 val;
+	int idx, pos = 0, ret = 0, total, msg_offset = 0;
+
+	/*
+	 * If the message length is already read in
+	 * the first byte of the buffer, account for
+	 * that by setting the offset
+	 */
+	if (qup_i2c_check_msg_len(msg) && (msg->len > 1))
+		msg_offset = 1;
+	total = qup_i2c_get_data_len(qup);
+	total -= msg_offset;
+
+	/* 2 extra bytes for read tags */
+	while (pos < (total + 2)) {
+		/* Check that FIFO have data */
+		ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
+					 SET_BIT, 4 * ONE_BYTE);
+		if (ret) {
+			dev_err(qup->dev, "timeout for fifo not empty");
+			return ret;
+		}
+		val = readl(qup->base + QUP_IN_FIFO_BASE);
+
+		for (idx = 0; idx < 4; idx++, val >>= 8, pos++) {
+			/* first 2 bytes are tag bytes */
+			if (pos < 2)
+				continue;
+
+			if (pos >= (total + 2))
+				goto out;
+			msg->buf[qup->pos + msg_offset] = val & 0xff;
+			qup->pos++;
+		}
+	}
+
+out:
+	qup->blk.data_len -= total;
+
+	return ret;
+}
+
+static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	int ret = 0;
+
+	qup->msg = msg;
+	qup->pos  = 0;
+	enable_irq(qup->irq);
+	qup_i2c_set_blk_data(qup, msg);
+	qup_i2c_set_read_mode_v2(qup, msg->len);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	do {
+		ret = qup_i2c_issue_xfer_v2(qup, msg);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_wait_for_complete(qup, msg);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_read_fifo_v2(qup, msg);
+		if (ret)
+			goto err;
+
+		qup->blk.pos++;
+
+		/* Handle SMBus block read length */
+		if (qup_i2c_check_msg_len(msg) && (msg->len == 1)) {
+			if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) {
+				ret = -EPROTO;
+				goto err;
+			}
+			msg->len += msg->buf[0];
+			qup->pos = 0;
+			qup_i2c_set_blk_data(qup, msg);
+			/* set tag length for block read */
+			qup->blk.tx_tag_len = 2;
+			qup_i2c_set_read_mode_v2(qup, msg->buf[0]);
+		}
+	} while (qup->blk.pos < qup->blk.count);
+
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	int ret;
+
+	qup->msg = msg;
+	qup->pos  = 0;
+
+	enable_irq(qup->irq);
+	qup_i2c_set_read_mode(qup, msg->len);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+	if (ret)
+		goto err;
+
+	qup_i2c_issue_read(qup, msg);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	do {
+		ret = qup_i2c_wait_for_complete(qup, msg);
+		if (ret)
+			goto err;
+
+		ret = qup_i2c_read_fifo(qup, msg);
+		if (ret)
+			goto err;
+	} while (qup->pos < msg->len);
+
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static int qup_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[],
+			int num)
+{
+	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+	int ret, idx;
+
+	ret = pm_runtime_get_sync(qup->dev);
+	if (ret < 0)
+		goto out;
+
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
+	writel(1, qup->base + QUP_SW_RESET);
+	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
+	if (ret)
+		goto out;
+
+	/* Configure QUP as I2C mini core */
+	writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
+
+	for (idx = 0; idx < num; idx++) {
+		if (msgs[idx].len == 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (qup_i2c_poll_state_i2c_master(qup)) {
+			ret = -EIO;
+			goto out;
+		}
+
+		if (qup_i2c_check_msg_len(&msgs[idx])) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (msgs[idx].flags & I2C_M_RD)
+			ret = qup_i2c_read_one(qup, &msgs[idx]);
+		else
+			ret = qup_i2c_write_one(qup, &msgs[idx]);
+
+		if (ret)
+			break;
+
+		ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
+		if (ret)
+			break;
+	}
+
+	if (ret == 0)
+		ret = num;
+out:
+
+	pm_runtime_mark_last_busy(qup->dev);
+	pm_runtime_put_autosuspend(qup->dev);
+
+	return ret;
+}
+
+static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
+			   struct i2c_msg msgs[],
+			   int num)
+{
+	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+	int ret, len, idx = 0, use_dma = 0;
+
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
+	ret = pm_runtime_get_sync(qup->dev);
+	if (ret < 0)
+		goto out;
+
+	writel(1, qup->base + QUP_SW_RESET);
+	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
+	if (ret)
+		goto out;
+
+	/* Configure QUP as I2C mini core */
+	writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG);
+	writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN);
+
+	if ((qup->is_dma)) {
+		/* All i2c_msgs should be transferred using either dma or cpu */
+		for (idx = 0; idx < num; idx++) {
+			if (msgs[idx].len == 0) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			len = (msgs[idx].len > qup->out_fifo_sz) ||
+			      (msgs[idx].len > qup->in_fifo_sz);
+
+			if ((!is_vmalloc_addr(msgs[idx].buf)) && len) {
+				use_dma = 1;
+			 } else {
+				use_dma = 0;
+				break;
+			}
+		}
+	}
+
+	idx = 0;
+
+	do {
+		if (msgs[idx].len == 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (qup_i2c_poll_state_i2c_master(qup)) {
+			ret = -EIO;
+			goto out;
+		}
+
+		qup->is_last = (idx == (num - 1));
+		if (idx)
+			qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN;
+		else
+			qup->config_run = 0;
+
+		reinit_completion(&qup->xfer);
+
+		if (use_dma) {
+			ret = qup_i2c_bam_xfer(adap, &msgs[idx], num);
+		} else {
+			if (msgs[idx].flags & I2C_M_RD)
+				ret = qup_i2c_read_one_v2(qup, &msgs[idx]);
+			else
+				ret = qup_i2c_write_one_v2(qup, &msgs[idx]);
+		}
+	} while ((idx++ < (num - 1)) && !use_dma && !ret);
+
+	if (!ret)
+		ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
+
+	if (ret == 0)
+		ret = num;
+out:
+	pm_runtime_mark_last_busy(qup->dev);
+	pm_runtime_put_autosuspend(qup->dev);
+
+	return ret;
+}
+
+static u32 qup_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm qup_i2c_algo = {
+	.master_xfer	= qup_i2c_xfer,
+	.functionality	= qup_i2c_func,
+};
+
+static const struct i2c_algorithm qup_i2c_algo_v2 = {
+	.master_xfer	= qup_i2c_xfer_v2,
+	.functionality	= qup_i2c_func,
+};
+
+/*
+ * The QUP block will issue a NACK and STOP on the bus when reaching
+ * the end of the read, the length of the read is specified as one byte
+ * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
+ */
+static const struct i2c_adapter_quirks qup_i2c_quirks = {
+	.max_read_len = QUP_READ_LIMIT,
+};
+
+static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
+{
+	clk_prepare_enable(qup->clk);
+	clk_prepare_enable(qup->pclk);
+}
+
+static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
+{
+	u32 config;
+
+	qup_i2c_change_state(qup, QUP_RESET_STATE);
+	clk_disable_unprepare(qup->clk);
+	config = readl(qup->base + QUP_CONFIG);
+	config |= QUP_CLOCK_AUTO_GATE;
+	writel(config, qup->base + QUP_CONFIG);
+	clk_disable_unprepare(qup->pclk);
+}
+
+static int qup_i2c_probe(struct platform_device *pdev)
+{
+	static const int blk_sizes[] = {4, 16, 32};
+	struct qup_i2c_dev *qup;
+	unsigned long one_bit_t;
+	struct resource *res;
+	u32 io_mode, hw_ver, size;
+	int ret, fs_div, hs_div;
+	u32 src_clk_freq = DEFAULT_SRC_CLK;
+	u32 clk_freq = DEFAULT_CLK_FREQ;
+	int blocks;
+
+	qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
+	if (!qup)
+		return -ENOMEM;
+
+	qup->dev = &pdev->dev;
+	init_completion(&qup->xfer);
+	platform_set_drvdata(pdev, qup);
+
+	ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
+	if (ret) {
+		dev_notice(qup->dev, "using default clock-frequency %d",
+			DEFAULT_CLK_FREQ);
+	}
+
+	if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
+		qup->adap.algo = &qup_i2c_algo;
+		qup->adap.quirks = &qup_i2c_quirks;
+	} else {
+		qup->adap.algo = &qup_i2c_algo_v2;
+		ret = qup_i2c_req_dma(qup);
+
+		if (ret == -EPROBE_DEFER)
+			goto fail_dma;
+		else if (ret != 0)
+			goto nodma;
+
+		blocks = (MX_BLOCKS << 1) + 1;
+		qup->btx.sg = devm_kzalloc(&pdev->dev,
+					   sizeof(*qup->btx.sg) * blocks,
+					   GFP_KERNEL);
+		if (!qup->btx.sg) {
+			ret = -ENOMEM;
+			goto fail_dma;
+		}
+		sg_init_table(qup->btx.sg, blocks);
+
+		qup->brx.sg = devm_kzalloc(&pdev->dev,
+					   sizeof(*qup->brx.sg) * blocks,
+					   GFP_KERNEL);
+		if (!qup->brx.sg) {
+			ret = -ENOMEM;
+			goto fail_dma;
+		}
+		sg_init_table(qup->brx.sg, blocks);
+
+		/* 2 tag bytes for each block + 5 for start, stop tags */
+		size = blocks * 2 + 5;
+
+		qup->start_tag.start = devm_kzalloc(&pdev->dev,
+						    size, GFP_KERNEL);
+		if (!qup->start_tag.start) {
+			ret = -ENOMEM;
+			goto fail_dma;
+		}
+
+		qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
+		if (!qup->brx.tag.start) {
+			ret = -ENOMEM;
+			goto fail_dma;
+		}
+
+		qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
+		if (!qup->btx.tag.start) {
+			ret = -ENOMEM;
+			goto fail_dma;
+		}
+		qup->is_dma = true;
+	}
+
+nodma:
+	/* We support frequencies up to FAST Mode (400KHz) */
+	if (!clk_freq || clk_freq > 400000) {
+		dev_err(qup->dev, "clock frequency not supported %d\n",
+			clk_freq);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	qup->base = devm_ioremap_resource(qup->dev, res);
+	if (IS_ERR(qup->base))
+		return PTR_ERR(qup->base);
+
+	qup->irq = platform_get_irq(pdev, 0);
+	if (qup->irq < 0) {
+		dev_err(qup->dev, "No IRQ defined\n");
+		return qup->irq;
+	}
+
+	if (has_acpi_companion(qup->dev)) {
+		ret = device_property_read_u32(qup->dev,
+				"src-clock-hz", &src_clk_freq);
+		if (ret) {
+			dev_notice(qup->dev, "using default src-clock-hz %d",
+				DEFAULT_SRC_CLK);
+		}
+		ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev));
+	} else {
+		qup->clk = devm_clk_get(qup->dev, "core");
+		if (IS_ERR(qup->clk)) {
+			dev_err(qup->dev, "Could not get core clock\n");
+			return PTR_ERR(qup->clk);
+		}
+
+		qup->pclk = devm_clk_get(qup->dev, "iface");
+		if (IS_ERR(qup->pclk)) {
+			dev_err(qup->dev, "Could not get iface clock\n");
+			return PTR_ERR(qup->pclk);
+		}
+		qup_i2c_enable_clocks(qup);
+		src_clk_freq = clk_get_rate(qup->clk);
+	}
+
+	/*
+	 * Bootloaders might leave a pending interrupt on certain QUP's,
+	 * so we reset the core before registering for interrupts.
+	 */
+	writel(1, qup->base + QUP_SW_RESET);
+	ret = qup_i2c_poll_state_valid(qup);
+	if (ret)
+		goto fail;
+
+	ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
+			       IRQF_TRIGGER_HIGH, "i2c_qup", qup);
+	if (ret) {
+		dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
+		goto fail;
+	}
+	disable_irq(qup->irq);
+
+	hw_ver = readl(qup->base + QUP_HW_VERSION);
+	dev_dbg(qup->dev, "Revision %x\n", hw_ver);
+
+	io_mode = readl(qup->base + QUP_IO_MODE);
+
+	/*
+	 * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
+	 * associated with each byte written/received
+	 */
+	size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
+	if (size >= ARRAY_SIZE(blk_sizes)) {
+		ret = -EIO;
+		goto fail;
+	}
+	qup->out_blk_sz = blk_sizes[size] / 2;
+
+	size = QUP_INPUT_BLOCK_SIZE(io_mode);
+	if (size >= ARRAY_SIZE(blk_sizes)) {
+		ret = -EIO;
+		goto fail;
+	}
+	qup->in_blk_sz = blk_sizes[size] / 2;
+
+	size = QUP_OUTPUT_FIFO_SIZE(io_mode);
+	qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
+
+	size = QUP_INPUT_FIFO_SIZE(io_mode);
+	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
+
+	fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
+	hs_div = 3;
+	qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+
+	/*
+	 * Time it takes for a byte to be clocked out on the bus.
+	 * Each byte takes 9 clock cycles (8 bits + 1 ack).
+	 */
+	one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
+	qup->one_byte_t = one_bit_t * 9;
+
+	dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
+		qup->in_blk_sz, qup->in_fifo_sz,
+		qup->out_blk_sz, qup->out_fifo_sz);
+
+	i2c_set_adapdata(&qup->adap, qup);
+	qup->adap.dev.parent = qup->dev;
+	qup->adap.dev.of_node = pdev->dev.of_node;
+	qup->is_last = true;
+
+	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
+
+	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(qup->dev);
+	pm_runtime_set_active(qup->dev);
+	pm_runtime_enable(qup->dev);
+
+	ret = i2c_add_adapter(&qup->adap);
+	if (ret)
+		goto fail_runtime;
+
+	return 0;
+
+fail_runtime:
+	pm_runtime_disable(qup->dev);
+	pm_runtime_set_suspended(qup->dev);
+fail:
+	qup_i2c_disable_clocks(qup);
+fail_dma:
+	if (qup->btx.dma)
+		dma_release_channel(qup->btx.dma);
+	if (qup->brx.dma)
+		dma_release_channel(qup->brx.dma);
+	return ret;
+}
+
+static int qup_i2c_remove(struct platform_device *pdev)
+{
+	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
+
+	if (qup->is_dma) {
+		dma_release_channel(qup->btx.dma);
+		dma_release_channel(qup->brx.dma);
+	}
+
+	disable_irq(qup->irq);
+	qup_i2c_disable_clocks(qup);
+	i2c_del_adapter(&qup->adap);
+	pm_runtime_disable(qup->dev);
+	pm_runtime_set_suspended(qup->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int qup_i2c_pm_suspend_runtime(struct device *device)
+{
+	struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+	dev_dbg(device, "pm_runtime: suspending...\n");
+	qup_i2c_disable_clocks(qup);
+	return 0;
+}
+
+static int qup_i2c_pm_resume_runtime(struct device *device)
+{
+	struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+	dev_dbg(device, "pm_runtime: resuming...\n");
+	qup_i2c_enable_clocks(qup);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int qup_i2c_suspend(struct device *device)
+{
+	if (!pm_runtime_suspended(device))
+		return qup_i2c_pm_suspend_runtime(device);
+	return 0;
+}
+
+static int qup_i2c_resume(struct device *device)
+{
+	qup_i2c_pm_resume_runtime(device);
+	pm_runtime_mark_last_busy(device);
+	pm_request_autosuspend(device);
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(
+		qup_i2c_suspend,
+		qup_i2c_resume)
+	SET_RUNTIME_PM_OPS(
+		qup_i2c_pm_suspend_runtime,
+		qup_i2c_pm_resume_runtime,
+		NULL)
+};
+
+static const struct of_device_id qup_i2c_dt_match[] = {
+	{ .compatible = "qcom,i2c-qup-v1.1.1" },
+	{ .compatible = "qcom,i2c-qup-v2.1.1" },
+	{ .compatible = "qcom,i2c-qup-v2.2.1" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+	{ "QCOM8010"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+#endif
+
+static struct platform_driver qup_i2c_driver = {
+	.probe  = qup_i2c_probe,
+	.remove = qup_i2c_remove,
+	.driver = {
+		.name = "i2c_qup",
+		.pm = &qup_i2c_qup_pm_ops,
+		.of_match_table = qup_i2c_dt_match,
+		.acpi_match_table = ACPI_PTR(qup_i2c_acpi_match),
+	},
+};
+
+module_platform_driver(qup_i2c_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c_qup");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rcar.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rcar.c
new file mode 100644
index 0000000..d5d0809
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rcar.c
@@ -0,0 +1,991 @@
+/*
+ * Driver for the Renesas R-Car I2C unit
+ *
+ * Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright (C) 2011-2015 Renesas Electronics Corporation
+ *
+ * Copyright (C) 2012-14 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This file is based on the drivers/i2c/busses/i2c-sh7760.c
+ * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+/* register offsets */
+#define ICSCR	0x00	/* slave ctrl */
+#define ICMCR	0x04	/* master ctrl */
+#define ICSSR	0x08	/* slave status */
+#define ICMSR	0x0C	/* master status */
+#define ICSIER	0x10	/* slave irq enable */
+#define ICMIER	0x14	/* master irq enable */
+#define ICCCR	0x18	/* clock dividers */
+#define ICSAR	0x1C	/* slave address */
+#define ICMAR	0x20	/* master address */
+#define ICRXTX	0x24	/* data port */
+#define ICDMAER	0x3c	/* DMA enable */
+#define ICFBSCR	0x38	/* first bit setup cycle */
+
+/* ICSCR */
+#define SDBS	(1 << 3)	/* slave data buffer select */
+#define SIE	(1 << 2)	/* slave interface enable */
+#define GCAE	(1 << 1)	/* general call address enable */
+#define FNA	(1 << 0)	/* forced non acknowledgment */
+
+/* ICMCR */
+#define MDBS	(1 << 7)	/* non-fifo mode switch */
+#define FSCL	(1 << 6)	/* override SCL pin */
+#define FSDA	(1 << 5)	/* override SDA pin */
+#define OBPC	(1 << 4)	/* override pins */
+#define MIE	(1 << 3)	/* master if enable */
+#define TSBE	(1 << 2)
+#define FSB	(1 << 1)	/* force stop bit */
+#define ESG	(1 << 0)	/* en startbit gen */
+
+/* ICSSR (also for ICSIER) */
+#define GCAR	(1 << 6)	/* general call received */
+#define STM	(1 << 5)	/* slave transmit mode */
+#define SSR	(1 << 4)	/* stop received */
+#define SDE	(1 << 3)	/* slave data empty */
+#define SDT	(1 << 2)	/* slave data transmitted */
+#define SDR	(1 << 1)	/* slave data received */
+#define SAR	(1 << 0)	/* slave addr received */
+
+/* ICMSR (also for ICMIE) */
+#define MNR	(1 << 6)	/* nack received */
+#define MAL	(1 << 5)	/* arbitration lost */
+#define MST	(1 << 4)	/* sent a stop */
+#define MDE	(1 << 3)
+#define MDT	(1 << 2)
+#define MDR	(1 << 1)
+#define MAT	(1 << 0)	/* slave addr xfer done */
+
+/* ICDMAER */
+#define RSDMAE	(1 << 3)	/* DMA Slave Received Enable */
+#define TSDMAE	(1 << 2)	/* DMA Slave Transmitted Enable */
+#define RMDMAE	(1 << 1)	/* DMA Master Received Enable */
+#define TMDMAE	(1 << 0)	/* DMA Master Transmitted Enable */
+
+/* ICFBSCR */
+#define TCYC06	0x04		/*  6*Tcyc delay 1st bit between SDA and SCL */
+#define TCYC17	0x0f		/* 17*Tcyc delay 1st bit between SDA and SCL */
+
+
+#define RCAR_BUS_PHASE_START	(MDBS | MIE | ESG)
+#define RCAR_BUS_PHASE_DATA	(MDBS | MIE)
+#define RCAR_BUS_MASK_DATA	(~(ESG | FSB) & 0xFF)
+#define RCAR_BUS_PHASE_STOP	(MDBS | MIE | FSB)
+
+#define RCAR_IRQ_SEND	(MNR | MAL | MST | MAT | MDE)
+#define RCAR_IRQ_RECV	(MNR | MAL | MST | MAT | MDR)
+#define RCAR_IRQ_STOP	(MST)
+
+#define RCAR_IRQ_ACK_SEND	(~(MAT | MDE) & 0xFF)
+#define RCAR_IRQ_ACK_RECV	(~(MAT | MDR) & 0xFF)
+
+#define ID_LAST_MSG	(1 << 0)
+#define ID_FIRST_MSG	(1 << 1)
+#define ID_DONE		(1 << 2)
+#define ID_ARBLOST	(1 << 3)
+#define ID_NACK		(1 << 4)
+/* persistent flags */
+#define ID_P_NO_RXDMA	(1 << 30) /* HW forbids RXDMA sometimes */
+#define ID_P_PM_BLOCKED	(1 << 31)
+#define ID_P_MASK	(ID_P_PM_BLOCKED | ID_P_NO_RXDMA)
+
+enum rcar_i2c_type {
+	I2C_RCAR_GEN1,
+	I2C_RCAR_GEN2,
+	I2C_RCAR_GEN3,
+};
+
+struct rcar_i2c_priv {
+	void __iomem *io;
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	int msgs_left;
+	struct clk *clk;
+
+	wait_queue_head_t wait;
+
+	int pos;
+	u32 icccr;
+	u32 flags;
+	enum rcar_i2c_type devtype;
+	struct i2c_client *slave;
+
+	struct resource *res;
+	struct dma_chan *dma_tx;
+	struct dma_chan *dma_rx;
+	struct scatterlist sg;
+	enum dma_data_direction dma_direction;
+
+	struct reset_control *rstc;
+	int irq;
+};
+
+#define rcar_i2c_priv_to_dev(p)		((p)->adap.dev.parent)
+#define rcar_i2c_is_recv(p)		((p)->msg->flags & I2C_M_RD)
+
+#define LOOP_TIMEOUT	1024
+
+
+static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val)
+{
+	writel(val, priv->io + reg);
+}
+
+static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg)
+{
+	return readl(priv->io + reg);
+}
+
+static void rcar_i2c_init(struct rcar_i2c_priv *priv)
+{
+	/* reset master mode */
+	rcar_i2c_write(priv, ICMIER, 0);
+	rcar_i2c_write(priv, ICMCR, MDBS);
+	rcar_i2c_write(priv, ICMSR, 0);
+	/* start clock */
+	rcar_i2c_write(priv, ICCCR, priv->icccr);
+}
+
+static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < LOOP_TIMEOUT; i++) {
+		/* make sure that bus is not busy */
+		if (!(rcar_i2c_read(priv, ICMCR) & FSDA))
+			return 0;
+		udelay(1);
+	}
+
+	return -EBUSY;
+}
+
+static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t)
+{
+	u32 scgd, cdf, round, ick, sum, scl, cdf_width;
+	unsigned long rate;
+	struct device *dev = rcar_i2c_priv_to_dev(priv);
+
+	/* Fall back to previously used values if not supplied */
+	t->bus_freq_hz = t->bus_freq_hz ?: 100000;
+	t->scl_fall_ns = t->scl_fall_ns ?: 35;
+	t->scl_rise_ns = t->scl_rise_ns ?: 200;
+	t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50;
+
+	switch (priv->devtype) {
+	case I2C_RCAR_GEN1:
+		cdf_width = 2;
+		break;
+	case I2C_RCAR_GEN2:
+	case I2C_RCAR_GEN3:
+		cdf_width = 3;
+		break;
+	default:
+		dev_err(dev, "device type error\n");
+		return -EIO;
+	}
+
+	/*
+	 * calculate SCL clock
+	 * see
+	 *	ICCCR
+	 *
+	 * ick	= clkp / (1 + CDF)
+	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
+	 *
+	 * ick  : I2C internal clock < 20 MHz
+	 * ticf : I2C SCL falling time
+	 * tr   : I2C SCL rising  time
+	 * intd : LSI internal delay
+	 * clkp : peripheral_clk
+	 * F[]  : integer up-valuation
+	 */
+	rate = clk_get_rate(priv->clk);
+	cdf = rate / 20000000;
+	if (cdf >= 1U << cdf_width) {
+		dev_err(dev, "Input clock %lu too high\n", rate);
+		return -EIO;
+	}
+	ick = rate / (cdf + 1);
+
+	/*
+	 * it is impossible to calculate large scale
+	 * number on u32. separate it
+	 *
+	 * F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
+	 *  = F[sum * ick / 1000000000]
+	 *  = F[(ick / 1000000) * sum / 1000]
+	 */
+	sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns;
+	round = (ick + 500000) / 1000000 * sum;
+	round = (round + 500) / 1000;
+
+	/*
+	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
+	 *
+	 * Calculation result (= SCL) should be less than
+	 * bus_speed for hardware safety
+	 *
+	 * We could use something along the lines of
+	 *	div = ick / (bus_speed + 1) + 1;
+	 *	scgd = (div - 20 - round + 7) / 8;
+	 *	scl = ick / (20 + (scgd * 8) + round);
+	 * (not fully verified) but that would get pretty involved
+	 */
+	for (scgd = 0; scgd < 0x40; scgd++) {
+		scl = ick / (20 + (scgd * 8) + round);
+		if (scl <= t->bus_freq_hz)
+			goto scgd_find;
+	}
+	dev_err(dev, "it is impossible to calculate best SCL\n");
+	return -EIO;
+
+scgd_find:
+	dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
+		scl, t->bus_freq_hz, clk_get_rate(priv->clk), round, cdf, scgd);
+
+	/* keep icccr value */
+	priv->icccr = scgd << cdf_width | cdf;
+
+	return 0;
+}
+
+static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
+{
+	int read = !!rcar_i2c_is_recv(priv);
+
+	priv->pos = 0;
+	if (priv->msgs_left == 1)
+		priv->flags |= ID_LAST_MSG;
+
+	rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
+	/*
+	 * We don't have a testcase but the HW engineers say that the write order
+	 * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
+	 * it didn't cause a drawback for me, let's rather be safe than sorry.
+	 */
+	if (priv->flags & ID_FIRST_MSG) {
+		rcar_i2c_write(priv, ICMSR, 0);
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+	} else {
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+		rcar_i2c_write(priv, ICMSR, 0);
+	}
+	rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
+}
+
+static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
+{
+	priv->msg++;
+	priv->msgs_left--;
+	priv->flags &= ID_P_MASK;
+	rcar_i2c_prepare_msg(priv);
+}
+
+/*
+ *		interrupt functions
+ */
+static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv)
+{
+	struct dma_chan *chan = priv->dma_direction == DMA_FROM_DEVICE
+		? priv->dma_rx : priv->dma_tx;
+
+	/* Disable DMA Master Received/Transmitted */
+	rcar_i2c_write(priv, ICDMAER, 0);
+
+	/* Reset default delay */
+	rcar_i2c_write(priv, ICFBSCR, TCYC06);
+
+	dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg),
+			 sg_dma_len(&priv->sg), priv->dma_direction);
+
+	/* Gen3 can only do one RXDMA per transfer and we just completed it */
+	if (priv->devtype == I2C_RCAR_GEN3 &&
+	    priv->dma_direction == DMA_FROM_DEVICE)
+		priv->flags |= ID_P_NO_RXDMA;
+
+	priv->dma_direction = DMA_NONE;
+}
+
+static void rcar_i2c_cleanup_dma(struct rcar_i2c_priv *priv)
+{
+	if (priv->dma_direction == DMA_NONE)
+		return;
+	else if (priv->dma_direction == DMA_FROM_DEVICE)
+		dmaengine_terminate_all(priv->dma_rx);
+	else if (priv->dma_direction == DMA_TO_DEVICE)
+		dmaengine_terminate_all(priv->dma_tx);
+
+	rcar_i2c_dma_unmap(priv);
+}
+
+static void rcar_i2c_dma_callback(void *data)
+{
+	struct rcar_i2c_priv *priv = data;
+
+	priv->pos += sg_dma_len(&priv->sg);
+
+	rcar_i2c_dma_unmap(priv);
+}
+
+static void rcar_i2c_dma(struct rcar_i2c_priv *priv)
+{
+	struct device *dev = rcar_i2c_priv_to_dev(priv);
+	struct i2c_msg *msg = priv->msg;
+	bool read = msg->flags & I2C_M_RD;
+	enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	struct dma_chan *chan = read ? priv->dma_rx : priv->dma_tx;
+	struct dma_async_tx_descriptor *txdesc;
+	dma_addr_t dma_addr;
+	dma_cookie_t cookie;
+	unsigned char *buf;
+	int len;
+
+	/* Do various checks to see if DMA is feasible at all */
+	if (IS_ERR(chan) || msg->len < 8 ||
+	    (read && priv->flags & ID_P_NO_RXDMA))
+		return;
+
+	if (read) {
+		/*
+		 * The last two bytes needs to be fetched using PIO in
+		 * order for the STOP phase to work.
+		 */
+		buf = priv->msg->buf;
+		len = priv->msg->len - 2;
+	} else {
+		/*
+		 * First byte in message was sent using PIO.
+		 */
+		buf = priv->msg->buf + 1;
+		len = priv->msg->len - 1;
+	}
+
+	dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
+	if (dma_mapping_error(chan->device->dev, dma_addr)) {
+		dev_dbg(dev, "dma map failed, using PIO\n");
+		return;
+	}
+
+	sg_dma_len(&priv->sg) = len;
+	sg_dma_address(&priv->sg) = dma_addr;
+
+	priv->dma_direction = dir;
+
+	txdesc = dmaengine_prep_slave_sg(chan, &priv->sg, 1,
+					 read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc) {
+		dev_dbg(dev, "dma prep slave sg failed, using PIO\n");
+		rcar_i2c_cleanup_dma(priv);
+		return;
+	}
+
+	txdesc->callback = rcar_i2c_dma_callback;
+	txdesc->callback_param = priv;
+
+	cookie = dmaengine_submit(txdesc);
+	if (dma_submit_error(cookie)) {
+		dev_dbg(dev, "submitting dma failed, using PIO\n");
+		rcar_i2c_cleanup_dma(priv);
+		return;
+	}
+
+	/* Set delay for DMA operations */
+	rcar_i2c_write(priv, ICFBSCR, TCYC17);
+
+	/* Enable DMA Master Received/Transmitted */
+	if (read)
+		rcar_i2c_write(priv, ICDMAER, RMDMAE);
+	else
+		rcar_i2c_write(priv, ICDMAER, TMDMAE);
+
+	dma_async_issue_pending(chan);
+}
+
+static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
+{
+	struct i2c_msg *msg = priv->msg;
+
+	/* FIXME: sometimes, unknown interrupt happened. Do nothing */
+	if (!(msr & MDE))
+		return;
+
+	if (priv->pos < msg->len) {
+		/*
+		 * Prepare next data to ICRXTX register.
+		 * This data will go to _SHIFT_ register.
+		 *
+		 *    *
+		 * [ICRXTX] -> [SHIFT] -> [I2C bus]
+		 */
+		rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]);
+		priv->pos++;
+
+		/*
+		 * Try to use DMA to transmit the rest of the data if
+		 * address transfer pashe just finished.
+		 */
+		if (msr & MAT)
+			rcar_i2c_dma(priv);
+	} else {
+		/*
+		 * The last data was pushed to ICRXTX on _PREV_ empty irq.
+		 * It is on _SHIFT_ register, and will sent to I2C bus.
+		 *
+		 *		  *
+		 * [ICRXTX] -> [SHIFT] -> [I2C bus]
+		 */
+
+		if (priv->flags & ID_LAST_MSG) {
+			/*
+			 * If current msg is the _LAST_ msg,
+			 * prepare stop condition here.
+			 * ID_DONE will be set on STOP irq.
+			 */
+			rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+		} else {
+			rcar_i2c_next_msg(priv);
+			return;
+		}
+	}
+
+	rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
+}
+
+static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
+{
+	struct i2c_msg *msg = priv->msg;
+
+	/* FIXME: sometimes, unknown interrupt happened. Do nothing */
+	if (!(msr & MDR))
+		return;
+
+	if (msr & MAT) {
+		/*
+		 * Address transfer phase finished, but no data at this point.
+		 * Try to use DMA to receive data.
+		 */
+		rcar_i2c_dma(priv);
+	} else if (priv->pos < msg->len) {
+		/* get received data */
+		msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX);
+		priv->pos++;
+	}
+
+	/*
+	 * If next received data is the _LAST_, go to STOP phase. Might be
+	 * overwritten by REP START when setting up a new msg. Not elegant
+	 * but the only stable sequence for REP START I have found so far.
+	 */
+	if (priv->pos + 1 >= msg->len)
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+
+	if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG))
+		rcar_i2c_next_msg(priv);
+	else
+		rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
+}
+
+static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
+{
+	u32 ssr_raw, ssr_filtered;
+	u8 value;
+
+	ssr_raw = rcar_i2c_read(priv, ICSSR) & 0xff;
+	ssr_filtered = ssr_raw & rcar_i2c_read(priv, ICSIER);
+
+	if (!ssr_filtered)
+		return false;
+
+	/* address detected */
+	if (ssr_filtered & SAR) {
+		/* read or write request */
+		if (ssr_raw & STM) {
+			i2c_slave_event(priv->slave, I2C_SLAVE_READ_REQUESTED, &value);
+			rcar_i2c_write(priv, ICRXTX, value);
+			rcar_i2c_write(priv, ICSIER, SDE | SSR | SAR);
+		} else {
+			i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+			rcar_i2c_read(priv, ICRXTX);	/* dummy read */
+			rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
+		}
+
+		/* Clear SSR, too, because of old STOPs to other clients than us */
+		rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff);
+	}
+
+	/* master sent stop */
+	if (ssr_filtered & SSR) {
+		i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
+		rcar_i2c_write(priv, ICSCR, SIE | SDBS); /* clear our NACK */
+		rcar_i2c_write(priv, ICSIER, SAR);
+		rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
+	}
+
+	/* master wants to write to us */
+	if (ssr_filtered & SDR) {
+		int ret;
+
+		value = rcar_i2c_read(priv, ICRXTX);
+		ret = i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+		/* Send NACK in case of error */
+		rcar_i2c_write(priv, ICSCR, SIE | SDBS | (ret < 0 ? FNA : 0));
+		rcar_i2c_write(priv, ICSSR, ~SDR & 0xff);
+	}
+
+	/* master wants to read from us */
+	if (ssr_filtered & SDE) {
+		i2c_slave_event(priv->slave, I2C_SLAVE_READ_PROCESSED, &value);
+		rcar_i2c_write(priv, ICRXTX, value);
+		rcar_i2c_write(priv, ICSSR, ~SDE & 0xff);
+	}
+
+	return true;
+}
+
+static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
+{
+	struct rcar_i2c_priv *priv = ptr;
+	u32 msr, val;
+
+	/* Clear START or STOP as soon as we can */
+	val = rcar_i2c_read(priv, ICMCR);
+	rcar_i2c_write(priv, ICMCR, val & RCAR_BUS_MASK_DATA);
+
+	msr = rcar_i2c_read(priv, ICMSR);
+
+	/* Only handle interrupts that are currently enabled */
+	msr &= rcar_i2c_read(priv, ICMIER);
+	if (!msr) {
+		if (rcar_i2c_slave_irq(priv))
+			return IRQ_HANDLED;
+
+		return IRQ_NONE;
+	}
+
+	/* Arbitration lost */
+	if (msr & MAL) {
+		priv->flags |= ID_DONE | ID_ARBLOST;
+		goto out;
+	}
+
+	/* Nack */
+	if (msr & MNR) {
+		/* HW automatically sends STOP after received NACK */
+		rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
+		priv->flags |= ID_NACK;
+		goto out;
+	}
+
+	/* Stop */
+	if (msr & MST) {
+		priv->msgs_left--; /* The last message also made it */
+		priv->flags |= ID_DONE;
+		goto out;
+	}
+
+	if (rcar_i2c_is_recv(priv))
+		rcar_i2c_irq_recv(priv, msr);
+	else
+		rcar_i2c_irq_send(priv, msr);
+
+out:
+	if (priv->flags & ID_DONE) {
+		rcar_i2c_write(priv, ICMIER, 0);
+		rcar_i2c_write(priv, ICMSR, 0);
+		wake_up(&priv->wait);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev,
+					enum dma_transfer_direction dir,
+					dma_addr_t port_addr)
+{
+	struct dma_chan *chan;
+	struct dma_slave_config cfg;
+	char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
+	int ret;
+
+	chan = dma_request_chan(dev, chan_name);
+	if (IS_ERR(chan)) {
+		dev_dbg(dev, "request_channel failed for %s (%ld)\n",
+			chan_name, PTR_ERR(chan));
+		return chan;
+	}
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.direction = dir;
+	if (dir == DMA_MEM_TO_DEV) {
+		cfg.dst_addr = port_addr;
+		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	} else {
+		cfg.src_addr = port_addr;
+		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	}
+
+	ret = dmaengine_slave_config(chan, &cfg);
+	if (ret) {
+		dev_dbg(dev, "slave_config failed for %s (%d)\n",
+			chan_name, ret);
+		dma_release_channel(chan);
+		return ERR_PTR(ret);
+	}
+
+	dev_dbg(dev, "got DMA channel for %s\n", chan_name);
+	return chan;
+}
+
+static void rcar_i2c_request_dma(struct rcar_i2c_priv *priv,
+				 struct i2c_msg *msg)
+{
+	struct device *dev = rcar_i2c_priv_to_dev(priv);
+	bool read;
+	struct dma_chan *chan;
+	enum dma_transfer_direction dir;
+
+	read = msg->flags & I2C_M_RD;
+
+	chan = read ? priv->dma_rx : priv->dma_tx;
+	if (PTR_ERR(chan) != -EPROBE_DEFER)
+		return;
+
+	dir = read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+	chan = rcar_i2c_request_dma_chan(dev, dir, priv->res->start + ICRXTX);
+
+	if (read)
+		priv->dma_rx = chan;
+	else
+		priv->dma_tx = chan;
+}
+
+static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv)
+{
+	if (!IS_ERR(priv->dma_tx)) {
+		dma_release_channel(priv->dma_tx);
+		priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
+	}
+
+	if (!IS_ERR(priv->dma_rx)) {
+		dma_release_channel(priv->dma_rx);
+		priv->dma_rx = ERR_PTR(-EPROBE_DEFER);
+	}
+}
+
+/* I2C is a special case, we need to poll the status of a reset */
+static int rcar_i2c_do_reset(struct rcar_i2c_priv *priv)
+{
+	int i, ret;
+
+	ret = reset_control_reset(priv->rstc);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < LOOP_TIMEOUT; i++) {
+		ret = reset_control_status(priv->rstc);
+		if (ret == 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs,
+				int num)
+{
+	struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+	struct device *dev = rcar_i2c_priv_to_dev(priv);
+	int i, ret;
+	long time_left;
+
+	pm_runtime_get_sync(dev);
+
+	/* Gen3 needs a reset before allowing RXDMA once */
+	if (priv->devtype == I2C_RCAR_GEN3) {
+		priv->flags |= ID_P_NO_RXDMA;
+		if (!IS_ERR(priv->rstc)) {
+			ret = rcar_i2c_do_reset(priv);
+			if (ret == 0)
+				priv->flags &= ~ID_P_NO_RXDMA;
+		}
+	}
+
+	rcar_i2c_init(priv);
+
+	ret = rcar_i2c_bus_barrier(priv);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < num; i++) {
+		/* This HW can't send STOP after address phase */
+		if (msgs[i].len == 0) {
+			ret = -EOPNOTSUPP;
+			goto out;
+		}
+		rcar_i2c_request_dma(priv, msgs + i);
+	}
+
+	/* init first message */
+	priv->msg = msgs;
+	priv->msgs_left = num;
+	priv->flags = (priv->flags & ID_P_MASK) | ID_FIRST_MSG;
+	rcar_i2c_prepare_msg(priv);
+
+	time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
+				     num * adap->timeout);
+
+	/* cleanup DMA if it couldn't complete properly due to an error */
+	if (priv->dma_direction != DMA_NONE)
+		rcar_i2c_cleanup_dma(priv);
+
+	if (!time_left) {
+		rcar_i2c_init(priv);
+		ret = -ETIMEDOUT;
+	} else if (priv->flags & ID_NACK) {
+		ret = -ENXIO;
+	} else if (priv->flags & ID_ARBLOST) {
+		ret = -EAGAIN;
+	} else {
+		ret = num - priv->msgs_left; /* The number of transfer */
+	}
+out:
+	pm_runtime_put(dev);
+
+	if (ret < 0 && ret != -ENXIO)
+		dev_err(dev, "error %d : %x\n", ret, priv->flags);
+
+	return ret;
+}
+
+static int rcar_reg_slave(struct i2c_client *slave)
+{
+	struct rcar_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+
+	if (priv->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	/* Keep device active for slave address detection logic */
+	pm_runtime_get_sync(rcar_i2c_priv_to_dev(priv));
+
+	priv->slave = slave;
+	rcar_i2c_write(priv, ICSAR, slave->addr);
+	rcar_i2c_write(priv, ICSSR, 0);
+	rcar_i2c_write(priv, ICSIER, SAR);
+	rcar_i2c_write(priv, ICSCR, SIE | SDBS);
+
+	return 0;
+}
+
+static int rcar_unreg_slave(struct i2c_client *slave)
+{
+	struct rcar_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+
+	WARN_ON(!priv->slave);
+
+	/* ensure no irq is running before clearing ptr */
+	disable_irq(priv->irq);
+	rcar_i2c_write(priv, ICSIER, 0);
+	rcar_i2c_write(priv, ICSSR, 0);
+	enable_irq(priv->irq);
+	rcar_i2c_write(priv, ICSCR, SDBS);
+	rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
+
+	priv->slave = NULL;
+
+	pm_runtime_put(rcar_i2c_priv_to_dev(priv));
+
+	return 0;
+}
+
+static u32 rcar_i2c_func(struct i2c_adapter *adap)
+{
+	/*
+	 * This HW can't do:
+	 * I2C_SMBUS_QUICK (setting FSB during START didn't work)
+	 * I2C_M_NOSTART (automatically sends address after START)
+	 * I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
+	 */
+	return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
+		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm rcar_i2c_algo = {
+	.master_xfer	= rcar_i2c_master_xfer,
+	.functionality	= rcar_i2c_func,
+	.reg_slave	= rcar_reg_slave,
+	.unreg_slave	= rcar_unreg_slave,
+};
+
+static const struct of_device_id rcar_i2c_dt_ids[] = {
+	{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
+	{ .compatible = "renesas,i2c-r8a7796", .data = (void *)I2C_RCAR_GEN3 },
+	{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 },	/* Deprecated */
+	{ .compatible = "renesas,rcar-gen1-i2c", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,rcar-gen2-i2c", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,rcar-gen3-i2c", .data = (void *)I2C_RCAR_GEN3 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
+
+static int rcar_i2c_probe(struct platform_device *pdev)
+{
+	struct rcar_i2c_priv *priv;
+	struct i2c_adapter *adap;
+	struct device *dev = &pdev->dev;
+	struct i2c_timings i2c_t;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "cannot get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	priv->io = devm_ioremap_resource(dev, priv->res);
+	if (IS_ERR(priv->io))
+		return PTR_ERR(priv->io);
+
+	priv->devtype = (enum rcar_i2c_type)of_device_get_match_data(dev);
+	init_waitqueue_head(&priv->wait);
+
+	adap = &priv->adap;
+	adap->nr = pdev->id;
+	adap->algo = &rcar_i2c_algo;
+	adap->class = I2C_CLASS_DEPRECATED;
+	adap->retries = 3;
+	adap->dev.parent = dev;
+	adap->dev.of_node = dev->of_node;
+	i2c_set_adapdata(adap, priv);
+	strlcpy(adap->name, pdev->name, sizeof(adap->name));
+
+	i2c_parse_fw_timings(dev, &i2c_t, false);
+
+	/* Init DMA */
+	sg_init_table(&priv->sg, 1);
+	priv->dma_direction = DMA_NONE;
+	priv->dma_rx = priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
+
+	/* Activate device for clock calculation */
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	ret = rcar_i2c_clock_calculate(priv, &i2c_t);
+	if (ret < 0)
+		goto out_pm_put;
+
+	rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
+
+	if (priv->devtype == I2C_RCAR_GEN3) {
+		priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+		if (!IS_ERR(priv->rstc)) {
+			ret = reset_control_status(priv->rstc);
+			if (ret < 0)
+				priv->rstc = ERR_PTR(-ENOTSUPP);
+		}
+	}
+
+	/* Stay always active when multi-master to keep arbitration working */
+	if (of_property_read_bool(dev->of_node, "multi-master"))
+		priv->flags |= ID_P_PM_BLOCKED;
+	else
+		pm_runtime_put(dev);
+
+
+	priv->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "cannot get irq %d\n", priv->irq);
+		goto out_pm_disable;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret < 0)
+		goto out_pm_disable;
+
+	dev_info(dev, "probed\n");
+
+	return 0;
+
+ out_pm_put:
+	pm_runtime_put(dev);
+ out_pm_disable:
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int rcar_i2c_remove(struct platform_device *pdev)
+{
+	struct rcar_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	i2c_del_adapter(&priv->adap);
+	rcar_i2c_release_dma(priv);
+	if (priv->flags & ID_P_PM_BLOCKED)
+		pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static struct platform_driver rcar_i2c_driver = {
+	.driver	= {
+		.name	= "i2c-rcar",
+		.of_match_table = rcar_i2c_dt_ids,
+	},
+	.probe		= rcar_i2c_probe,
+	.remove		= rcar_i2c_remove,
+};
+
+module_platform_driver(rcar_i2c_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car I2C bus driver");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-riic.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-riic.c
new file mode 100644
index 0000000..e420b41
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-riic.c
@@ -0,0 +1,445 @@
+/*
+ * Renesas RIIC driver
+ *
+ * Copyright (C) 2013 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This i2c core has a lot of interrupts, namely 8. We use their chaining as
+ * some kind of state machine.
+ *
+ * 1) The main xfer routine kicks off a transmission by putting the start bit
+ * (or repeated start) on the bus and enabling the transmit interrupt (TIE)
+ * since we need to send the slave address + RW bit in every case.
+ *
+ * 2) TIE sends slave address + RW bit and selects how to continue.
+ *
+ * 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
+ * are done, we switch over to the transmission done interrupt (TEIE) and mark
+ * the message as completed (includes sending STOP) there.
+ *
+ * 3b) Read case: We switch over to receive interrupt (RIE). One dummy read is
+ * needed to start clocking, then we keep receiving until we are done. Note
+ * that we use the RDRFS mode all the time, i.e. we ACK/NACK every byte by
+ * writing to the ACKBT bit. I tried using the RDRFS mode only at the end of a
+ * message to create the final NACK as sketched in the datasheet. This caused
+ * some subtle races (when byte n was processed and byte n+1 was already
+ * waiting), though, and I started with the safe approach.
+ *
+ * 4) If we got a NACK somewhere, we flag the error and stop the transmission
+ * via NAKIE.
+ *
+ * Also check the comments in the interrupt routines for some gory details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define RIIC_ICCR1	0x00
+#define RIIC_ICCR2	0x04
+#define RIIC_ICMR1	0x08
+#define RIIC_ICMR3	0x10
+#define RIIC_ICSER	0x18
+#define RIIC_ICIER	0x1c
+#define RIIC_ICSR2	0x24
+#define RIIC_ICBRL	0x34
+#define RIIC_ICBRH	0x38
+#define RIIC_ICDRT	0x3c
+#define RIIC_ICDRR	0x40
+
+#define ICCR1_ICE	0x80
+#define ICCR1_IICRST	0x40
+#define ICCR1_SOWP	0x10
+
+#define ICCR2_BBSY	0x80
+#define ICCR2_SP	0x08
+#define ICCR2_RS	0x04
+#define ICCR2_ST	0x02
+
+#define ICMR1_CKS_MASK	0x70
+#define ICMR1_BCWP	0x08
+#define ICMR1_CKS(_x)	((((_x) << 4) & ICMR1_CKS_MASK) | ICMR1_BCWP)
+
+#define ICMR3_RDRFS	0x20
+#define ICMR3_ACKWP	0x10
+#define ICMR3_ACKBT	0x08
+
+#define ICIER_TIE	0x80
+#define ICIER_TEIE	0x40
+#define ICIER_RIE	0x20
+#define ICIER_NAKIE	0x10
+#define ICIER_SPIE	0x08
+
+#define ICSR2_NACKF	0x10
+
+/* ICBRx (@ PCLK 33MHz) */
+#define ICBR_RESERVED	0xe0 /* Should be 1 on writes */
+#define ICBRL_SP100K	(19 | ICBR_RESERVED)
+#define ICBRH_SP100K	(16 | ICBR_RESERVED)
+#define ICBRL_SP400K	(21 | ICBR_RESERVED)
+#define ICBRH_SP400K	(9 | ICBR_RESERVED)
+
+#define RIIC_INIT_MSG	-1
+
+struct riic_dev {
+	void __iomem *base;
+	u8 *buf;
+	struct i2c_msg *msg;
+	int bytes_left;
+	int err;
+	int is_last;
+	struct completion msg_done;
+	struct i2c_adapter adapter;
+	struct clk *clk;
+};
+
+struct riic_irq_desc {
+	int res_num;
+	irq_handler_t isr;
+	char *name;
+};
+
+static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg)
+{
+	writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg);
+}
+
+static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct riic_dev *riic = i2c_get_adapdata(adap);
+	unsigned long time_left;
+	int i, ret;
+	u8 start_bit;
+
+	ret = clk_prepare_enable(riic->clk);
+	if (ret)
+		return ret;
+
+	if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) {
+		riic->err = -EBUSY;
+		goto out;
+	}
+
+	reinit_completion(&riic->msg_done);
+	riic->err = 0;
+
+	writeb(0, riic->base + RIIC_ICSR2);
+
+	for (i = 0, start_bit = ICCR2_ST; i < num; i++) {
+		riic->bytes_left = RIIC_INIT_MSG;
+		riic->buf = msgs[i].buf;
+		riic->msg = &msgs[i];
+		riic->is_last = (i == num - 1);
+
+		writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER);
+
+		writeb(start_bit, riic->base + RIIC_ICCR2);
+
+		time_left = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout);
+		if (time_left == 0)
+			riic->err = -ETIMEDOUT;
+
+		if (riic->err)
+			break;
+
+		start_bit = ICCR2_RS;
+	}
+
+ out:
+	clk_disable_unprepare(riic->clk);
+
+	return riic->err ?: num;
+}
+
+static irqreturn_t riic_tdre_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+	u8 val;
+
+	if (!riic->bytes_left)
+		return IRQ_NONE;
+
+	if (riic->bytes_left == RIIC_INIT_MSG) {
+		val = !!(riic->msg->flags & I2C_M_RD);
+		if (val)
+			/* On read, switch over to receive interrupt */
+			riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER);
+		else
+			/* On write, initialize length */
+			riic->bytes_left = riic->msg->len;
+
+		val |= (riic->msg->addr << 1);
+	} else {
+		val = *riic->buf;
+		riic->buf++;
+		riic->bytes_left--;
+	}
+
+	/*
+	 * Switch to transmission ended interrupt when done. Do check here
+	 * after bytes_left was initialized to support SMBUS_QUICK (new msg has
+	 * 0 length then)
+	 */
+	if (riic->bytes_left == 0)
+		riic_clear_set_bit(riic, ICIER_TIE, ICIER_TEIE, RIIC_ICIER);
+
+	/*
+	 * This acks the TIE interrupt. We get another TIE immediately if our
+	 * value could be moved to the shadow shift register right away. So
+	 * this must be after updates to ICIER (where we want to disable TIE)!
+	 */
+	writeb(val, riic->base + RIIC_ICDRT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t riic_tend_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) {
+		/* We got a NACKIE */
+		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		riic_clear_set_bit(riic, ICSR2_NACKF, 0, RIIC_ICSR2);
+		riic->err = -ENXIO;
+	} else if (riic->bytes_left) {
+		return IRQ_NONE;
+	}
+
+	if (riic->is_last || riic->err) {
+		riic_clear_set_bit(riic, ICIER_TEIE, ICIER_SPIE, RIIC_ICIER);
+		writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+	} else {
+		/* Transfer is complete, but do not send STOP */
+		riic_clear_set_bit(riic, ICIER_TEIE, 0, RIIC_ICIER);
+		complete(&riic->msg_done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t riic_rdrf_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	if (!riic->bytes_left)
+		return IRQ_NONE;
+
+	if (riic->bytes_left == RIIC_INIT_MSG) {
+		riic->bytes_left = riic->msg->len;
+		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		return IRQ_HANDLED;
+	}
+
+	if (riic->bytes_left == 1) {
+		/* STOP must come before we set ACKBT! */
+		if (riic->is_last) {
+			riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
+			writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+		}
+
+		riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
+
+	} else {
+		riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3);
+	}
+
+	/* Reading acks the RIE interrupt */
+	*riic->buf = readb(riic->base + RIIC_ICDRR);
+	riic->buf++;
+	riic->bytes_left--;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t riic_stop_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	/* read back registers to confirm writes have fully propagated */
+	writeb(0, riic->base + RIIC_ICSR2);
+	readb(riic->base + RIIC_ICSR2);
+	writeb(0, riic->base + RIIC_ICIER);
+	readb(riic->base + RIIC_ICIER);
+
+	complete(&riic->msg_done);
+
+	return IRQ_HANDLED;
+}
+
+static u32 riic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm riic_algo = {
+	.master_xfer	= riic_xfer,
+	.functionality	= riic_func,
+};
+
+static int riic_init_hw(struct riic_dev *riic, u32 spd)
+{
+	int ret;
+	unsigned long rate;
+
+	ret = clk_prepare_enable(riic->clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * TODO: Implement formula to calculate the timing values depending on
+	 * variable parent clock rate and arbitrary bus speed
+	 */
+	rate = clk_get_rate(riic->clk);
+	if (rate != 33325000) {
+		dev_err(&riic->adapter.dev,
+			"invalid parent clk (%lu). Must be 33325000Hz\n", rate);
+		clk_disable_unprepare(riic->clk);
+		return -EINVAL;
+	}
+
+	/* Changing the order of accessing IICRST and ICE may break things! */
+	writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
+	riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);
+
+	switch (spd) {
+	case 100000:
+		writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1);
+		writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH);
+		writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL);
+		break;
+	case 400000:
+		writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1);
+		writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH);
+		writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL);
+		break;
+	default:
+		dev_err(&riic->adapter.dev,
+			"unsupported bus speed (%dHz). Use 100000 or 400000\n", spd);
+		clk_disable_unprepare(riic->clk);
+		return -EINVAL;
+	}
+
+	writeb(0, riic->base + RIIC_ICSER);
+	writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
+
+	riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1);
+
+	clk_disable_unprepare(riic->clk);
+
+	return 0;
+}
+
+static struct riic_irq_desc riic_irqs[] = {
+	{ .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" },
+	{ .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" },
+	{ .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" },
+	{ .res_num = 3, .isr = riic_stop_isr, .name = "riic-stop" },
+	{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
+};
+
+static int riic_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct riic_dev *riic;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	u32 bus_rate = 0;
+	int i, ret;
+
+	riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
+	if (!riic)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	riic->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(riic->base))
+		return PTR_ERR(riic->base);
+
+	riic->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(riic->clk)) {
+		dev_err(&pdev->dev, "missing controller clock");
+		return PTR_ERR(riic->clk);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num);
+		if (!res)
+			return -ENODEV;
+
+		ret = devm_request_irq(&pdev->dev, res->start, riic_irqs[i].isr,
+					0, riic_irqs[i].name, riic);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name);
+			return ret;
+		}
+	}
+
+	adap = &riic->adapter;
+	i2c_set_adapdata(adap, riic);
+	strlcpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &riic_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&riic->msg_done);
+
+	of_property_read_u32(np, "clock-frequency", &bus_rate);
+	ret = riic_init_hw(riic, bus_rate);
+	if (ret)
+		return ret;
+
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, riic);
+
+	dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate);
+	return 0;
+}
+
+static int riic_i2c_remove(struct platform_device *pdev)
+{
+	struct riic_dev *riic = platform_get_drvdata(pdev);
+
+	writeb(0, riic->base + RIIC_ICIER);
+	i2c_del_adapter(&riic->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id riic_i2c_dt_ids[] = {
+	{ .compatible = "renesas,riic-rz" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver riic_i2c_driver = {
+	.probe		= riic_i2c_probe,
+	.remove		= riic_i2c_remove,
+	.driver		= {
+		.name	= "i2c-riic",
+		.of_match_table = riic_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(riic_i2c_driver);
+
+MODULE_DESCRIPTION("Renesas RIIC adapter");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, riic_i2c_dt_ids);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rk3x.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rk3x.c
new file mode 100644
index 0000000..fe23457
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-rk3x.c
@@ -0,0 +1,1370 @@
+/*
+ * Driver for I2C adapter in Rockchip RK3xxx SoC
+ *
+ * Max Schwarz <max.schwarz@online.de>
+ * based on the patches by Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/wait.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/math64.h>
+
+
+/* Register Map */
+#define REG_CON        0x00 /* control register */
+#define REG_CLKDIV     0x04 /* clock divisor register */
+#define REG_MRXADDR    0x08 /* slave address for REGISTER_TX */
+#define REG_MRXRADDR   0x0c /* slave register address for REGISTER_TX */
+#define REG_MTXCNT     0x10 /* number of bytes to be transmitted */
+#define REG_MRXCNT     0x14 /* number of bytes to be received */
+#define REG_IEN        0x18 /* interrupt enable */
+#define REG_IPD        0x1c /* interrupt pending */
+#define REG_FCNT       0x20 /* finished count */
+
+/* Data buffer offsets */
+#define TXBUFFER_BASE 0x100
+#define RXBUFFER_BASE 0x200
+
+/* REG_CON bits */
+#define REG_CON_EN        BIT(0)
+enum {
+	REG_CON_MOD_TX = 0,      /* transmit data */
+	REG_CON_MOD_REGISTER_TX, /* select register and restart */
+	REG_CON_MOD_RX,          /* receive data */
+	REG_CON_MOD_REGISTER_RX, /* broken: transmits read addr AND writes
+				  * register addr */
+};
+#define REG_CON_MOD(mod)  ((mod) << 1)
+#define REG_CON_MOD_MASK  (BIT(1) | BIT(2))
+#define REG_CON_START     BIT(3)
+#define REG_CON_STOP      BIT(4)
+#define REG_CON_LASTACK   BIT(5) /* 1: send NACK after last received byte */
+#define REG_CON_ACTACK    BIT(6) /* 1: stop if NACK is received */
+
+#define REG_CON_TUNING_MASK GENMASK_ULL(15, 8)
+
+#define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
+#define REG_CON_STA_CFG(cfg) ((cfg) << 12)
+#define REG_CON_STO_CFG(cfg) ((cfg) << 14)
+
+/* REG_MRXADDR bits */
+#define REG_MRXADDR_VALID(x) BIT(24 + (x)) /* [x*8+7:x*8] of MRX[R]ADDR valid */
+
+/* REG_IEN/REG_IPD bits */
+#define REG_INT_BTF       BIT(0) /* a byte was transmitted */
+#define REG_INT_BRF       BIT(1) /* a byte was received */
+#define REG_INT_MBTF      BIT(2) /* master data transmit finished */
+#define REG_INT_MBRF      BIT(3) /* master data receive finished */
+#define REG_INT_START     BIT(4) /* START condition generated */
+#define REG_INT_STOP      BIT(5) /* STOP condition generated */
+#define REG_INT_NAKRCV    BIT(6) /* NACK received */
+#define REG_INT_ALL       0x7f
+
+/* Constants */
+#define WAIT_TIMEOUT      1000 /* ms */
+#define DEFAULT_SCL_RATE  (100 * 1000) /* Hz */
+
+/**
+ * struct i2c_spec_values:
+ * @min_hold_start_ns: min hold time (repeated) START condition
+ * @min_low_ns: min LOW period of the SCL clock
+ * @min_high_ns: min HIGH period of the SCL cloc
+ * @min_setup_start_ns: min set-up time for a repeated START conditio
+ * @max_data_hold_ns: max data hold time
+ * @min_data_setup_ns: min data set-up time
+ * @min_setup_stop_ns: min set-up time for STOP condition
+ * @min_hold_buffer_ns: min bus free time between a STOP and
+ * START condition
+ */
+struct i2c_spec_values {
+	unsigned long min_hold_start_ns;
+	unsigned long min_low_ns;
+	unsigned long min_high_ns;
+	unsigned long min_setup_start_ns;
+	unsigned long max_data_hold_ns;
+	unsigned long min_data_setup_ns;
+	unsigned long min_setup_stop_ns;
+	unsigned long min_hold_buffer_ns;
+};
+
+static const struct i2c_spec_values standard_mode_spec = {
+	.min_hold_start_ns = 4000,
+	.min_low_ns = 4700,
+	.min_high_ns = 4000,
+	.min_setup_start_ns = 4700,
+	.max_data_hold_ns = 3450,
+	.min_data_setup_ns = 250,
+	.min_setup_stop_ns = 4000,
+	.min_hold_buffer_ns = 4700,
+};
+
+static const struct i2c_spec_values fast_mode_spec = {
+	.min_hold_start_ns = 600,
+	.min_low_ns = 1300,
+	.min_high_ns = 600,
+	.min_setup_start_ns = 600,
+	.max_data_hold_ns = 900,
+	.min_data_setup_ns = 100,
+	.min_setup_stop_ns = 600,
+	.min_hold_buffer_ns = 1300,
+};
+
+static const struct i2c_spec_values fast_mode_plus_spec = {
+	.min_hold_start_ns = 260,
+	.min_low_ns = 500,
+	.min_high_ns = 260,
+	.min_setup_start_ns = 260,
+	.max_data_hold_ns = 400,
+	.min_data_setup_ns = 50,
+	.min_setup_stop_ns = 260,
+	.min_hold_buffer_ns = 500,
+};
+
+/**
+ * struct rk3x_i2c_calced_timings:
+ * @div_low: Divider output for low
+ * @div_high: Divider output for high
+ * @tuning: Used to adjust setup/hold data time,
+ * setup/hold start time and setup stop time for
+ * v1's calc_timings, the tuning should all be 0
+ * for old hardware anyone using v0's calc_timings.
+ */
+struct rk3x_i2c_calced_timings {
+	unsigned long div_low;
+	unsigned long div_high;
+	unsigned int tuning;
+};
+
+enum rk3x_i2c_state {
+	STATE_IDLE,
+	STATE_START,
+	STATE_READ,
+	STATE_WRITE,
+	STATE_STOP
+};
+
+/**
+ * @grf_offset: offset inside the grf regmap for setting the i2c type
+ * @calc_timings: Callback function for i2c timing information calculated
+ */
+struct rk3x_i2c_soc_data {
+	int grf_offset;
+	int (*calc_timings)(unsigned long, struct i2c_timings *,
+			    struct rk3x_i2c_calced_timings *);
+};
+
+/**
+ * struct rk3x_i2c - private data of the controller
+ * @adap: corresponding I2C adapter
+ * @dev: device for this controller
+ * @soc_data: related soc data struct
+ * @regs: virtual memory area
+ * @clk: function clk for rk3399 or function & Bus clks for others
+ * @pclk: Bus clk for rk3399
+ * @clk_rate_nb: i2c clk rate change notify
+ * @t: I2C known timing information
+ * @lock: spinlock for the i2c bus
+ * @wait: the waitqueue to wait for i2c transfer
+ * @busy: the condition for the event to wait for
+ * @msg: current i2c message
+ * @addr: addr of i2c slave device
+ * @mode: mode of i2c transfer
+ * @is_last_msg: flag determines whether it is the last msg in this transfer
+ * @state: state of i2c transfer
+ * @processed: byte length which has been send or received
+ * @error: error code for i2c transfer
+ */
+struct rk3x_i2c {
+	struct i2c_adapter adap;
+	struct device *dev;
+	struct rk3x_i2c_soc_data *soc_data;
+
+	/* Hardware resources */
+	void __iomem *regs;
+	struct clk *clk;
+	struct clk *pclk;
+	struct notifier_block clk_rate_nb;
+
+	/* Settings */
+	struct i2c_timings t;
+
+	/* Synchronization & notification */
+	spinlock_t lock;
+	wait_queue_head_t wait;
+	bool busy;
+
+	/* Current message */
+	struct i2c_msg *msg;
+	u8 addr;
+	unsigned int mode;
+	bool is_last_msg;
+
+	/* I2C state machine */
+	enum rk3x_i2c_state state;
+	unsigned int processed;
+	int error;
+};
+
+static inline void i2c_writel(struct rk3x_i2c *i2c, u32 value,
+			      unsigned int offset)
+{
+	writel(value, i2c->regs + offset);
+}
+
+static inline u32 i2c_readl(struct rk3x_i2c *i2c, unsigned int offset)
+{
+	return readl(i2c->regs + offset);
+}
+
+/* Reset all interrupt pending bits */
+static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
+{
+	i2c_writel(i2c, REG_INT_ALL, REG_IPD);
+}
+
+/**
+ * Generate a START condition, which triggers a REG_INT_START interrupt.
+ */
+static void rk3x_i2c_start(struct rk3x_i2c *i2c)
+{
+	u32 val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+
+	i2c_writel(i2c, REG_INT_START, REG_IEN);
+
+	/* enable adapter with correct mode, send START condition */
+	val |= REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
+
+	/* if we want to react to NACK, set ACTACK bit */
+	if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
+		val |= REG_CON_ACTACK;
+
+	i2c_writel(i2c, val, REG_CON);
+}
+
+/**
+ * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
+ *
+ * @error: Error code to return in rk3x_i2c_xfer
+ */
+static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
+{
+	unsigned int ctrl;
+
+	i2c->processed = 0;
+	i2c->msg = NULL;
+	i2c->error = error;
+
+	if (i2c->is_last_msg) {
+		/* Enable stop interrupt */
+		i2c_writel(i2c, REG_INT_STOP, REG_IEN);
+
+		i2c->state = STATE_STOP;
+
+		ctrl = i2c_readl(i2c, REG_CON);
+		ctrl |= REG_CON_STOP;
+		i2c_writel(i2c, ctrl, REG_CON);
+	} else {
+		/* Signal rk3x_i2c_xfer to start the next message. */
+		i2c->busy = false;
+		i2c->state = STATE_IDLE;
+
+		/*
+		 * The HW is actually not capable of REPEATED START. But we can
+		 * get the intended effect by resetting its internal state
+		 * and issuing an ordinary START.
+		 */
+		ctrl = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+		i2c_writel(i2c, ctrl, REG_CON);
+
+		/* signal that we are finished with the current msg */
+		wake_up(&i2c->wait);
+	}
+}
+
+/**
+ * Setup a read according to i2c->msg
+ */
+static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
+{
+	unsigned int len = i2c->msg->len - i2c->processed;
+	u32 con;
+
+	con = i2c_readl(i2c, REG_CON);
+
+	/*
+	 * The hw can read up to 32 bytes at a time. If we need more than one
+	 * chunk, send an ACK after the last byte of the current chunk.
+	 */
+	if (len > 32) {
+		len = 32;
+		con &= ~REG_CON_LASTACK;
+	} else {
+		con |= REG_CON_LASTACK;
+	}
+
+	/* make sure we are in plain RX mode if we read a second chunk */
+	if (i2c->processed != 0) {
+		con &= ~REG_CON_MOD_MASK;
+		con |= REG_CON_MOD(REG_CON_MOD_RX);
+	}
+
+	i2c_writel(i2c, con, REG_CON);
+	i2c_writel(i2c, len, REG_MRXCNT);
+}
+
+/**
+ * Fill the transmit buffer with data from i2c->msg
+ */
+static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c)
+{
+	unsigned int i, j;
+	u32 cnt = 0;
+	u32 val;
+	u8 byte;
+
+	for (i = 0; i < 8; ++i) {
+		val = 0;
+		for (j = 0; j < 4; ++j) {
+			if ((i2c->processed == i2c->msg->len) && (cnt != 0))
+				break;
+
+			if (i2c->processed == 0 && cnt == 0)
+				byte = (i2c->addr & 0x7f) << 1;
+			else
+				byte = i2c->msg->buf[i2c->processed++];
+
+			val |= byte << (j * 8);
+			cnt++;
+		}
+
+		i2c_writel(i2c, val, TXBUFFER_BASE + 4 * i);
+
+		if (i2c->processed == i2c->msg->len)
+			break;
+	}
+
+	i2c_writel(i2c, cnt, REG_MTXCNT);
+}
+
+
+/* IRQ handlers for individual states */
+
+static void rk3x_i2c_handle_start(struct rk3x_i2c *i2c, unsigned int ipd)
+{
+	if (!(ipd & REG_INT_START)) {
+		rk3x_i2c_stop(i2c, -EIO);
+		dev_warn(i2c->dev, "unexpected irq in START: 0x%x\n", ipd);
+		rk3x_i2c_clean_ipd(i2c);
+		return;
+	}
+
+	/* ack interrupt */
+	i2c_writel(i2c, REG_INT_START, REG_IPD);
+
+	/* disable start bit */
+	i2c_writel(i2c, i2c_readl(i2c, REG_CON) & ~REG_CON_START, REG_CON);
+
+	/* enable appropriate interrupts and transition */
+	if (i2c->mode == REG_CON_MOD_TX) {
+		i2c_writel(i2c, REG_INT_MBTF | REG_INT_NAKRCV, REG_IEN);
+		i2c->state = STATE_WRITE;
+		rk3x_i2c_fill_transmit_buf(i2c);
+	} else {
+		/* in any other case, we are going to be reading. */
+		i2c_writel(i2c, REG_INT_MBRF | REG_INT_NAKRCV, REG_IEN);
+		i2c->state = STATE_READ;
+		rk3x_i2c_prepare_read(i2c);
+	}
+}
+
+static void rk3x_i2c_handle_write(struct rk3x_i2c *i2c, unsigned int ipd)
+{
+	if (!(ipd & REG_INT_MBTF)) {
+		rk3x_i2c_stop(i2c, -EIO);
+		dev_err(i2c->dev, "unexpected irq in WRITE: 0x%x\n", ipd);
+		rk3x_i2c_clean_ipd(i2c);
+		return;
+	}
+
+	/* ack interrupt */
+	i2c_writel(i2c, REG_INT_MBTF, REG_IPD);
+
+	/* are we finished? */
+	if (i2c->processed == i2c->msg->len)
+		rk3x_i2c_stop(i2c, i2c->error);
+	else
+		rk3x_i2c_fill_transmit_buf(i2c);
+}
+
+static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
+{
+	unsigned int i;
+	unsigned int len = i2c->msg->len - i2c->processed;
+	u32 uninitialized_var(val);
+	u8 byte;
+
+	/* we only care for MBRF here. */
+	if (!(ipd & REG_INT_MBRF))
+		return;
+
+	/* ack interrupt */
+	i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+
+	/* Can only handle a maximum of 32 bytes at a time */
+	if (len > 32)
+		len = 32;
+
+	/* read the data from receive buffer */
+	for (i = 0; i < len; ++i) {
+		if (i % 4 == 0)
+			val = i2c_readl(i2c, RXBUFFER_BASE + (i / 4) * 4);
+
+		byte = (val >> ((i % 4) * 8)) & 0xff;
+		i2c->msg->buf[i2c->processed++] = byte;
+	}
+
+	/* are we finished? */
+	if (i2c->processed == i2c->msg->len)
+		rk3x_i2c_stop(i2c, i2c->error);
+	else
+		rk3x_i2c_prepare_read(i2c);
+}
+
+static void rk3x_i2c_handle_stop(struct rk3x_i2c *i2c, unsigned int ipd)
+{
+	unsigned int con;
+
+	if (!(ipd & REG_INT_STOP)) {
+		rk3x_i2c_stop(i2c, -EIO);
+		dev_err(i2c->dev, "unexpected irq in STOP: 0x%x\n", ipd);
+		rk3x_i2c_clean_ipd(i2c);
+		return;
+	}
+
+	/* ack interrupt */
+	i2c_writel(i2c, REG_INT_STOP, REG_IPD);
+
+	/* disable STOP bit */
+	con = i2c_readl(i2c, REG_CON);
+	con &= ~REG_CON_STOP;
+	i2c_writel(i2c, con, REG_CON);
+
+	i2c->busy = false;
+	i2c->state = STATE_IDLE;
+
+	/* signal rk3x_i2c_xfer that we are finished */
+	wake_up(&i2c->wait);
+}
+
+static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
+{
+	struct rk3x_i2c *i2c = dev_id;
+	unsigned int ipd;
+
+	spin_lock(&i2c->lock);
+
+	ipd = i2c_readl(i2c, REG_IPD);
+	if (i2c->state == STATE_IDLE) {
+		dev_warn(i2c->dev, "irq in STATE_IDLE, ipd = 0x%x\n", ipd);
+		rk3x_i2c_clean_ipd(i2c);
+		goto out;
+	}
+
+	dev_dbg(i2c->dev, "IRQ: state %d, ipd: %x\n", i2c->state, ipd);
+
+	/* Clean interrupt bits we don't care about */
+	ipd &= ~(REG_INT_BRF | REG_INT_BTF);
+
+	if (ipd & REG_INT_NAKRCV) {
+		/*
+		 * We got a NACK in the last operation. Depending on whether
+		 * IGNORE_NAK is set, we have to stop the operation and report
+		 * an error.
+		 */
+		i2c_writel(i2c, REG_INT_NAKRCV, REG_IPD);
+
+		ipd &= ~REG_INT_NAKRCV;
+
+		if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
+			rk3x_i2c_stop(i2c, -ENXIO);
+	}
+
+	/* is there anything left to handle? */
+	if ((ipd & REG_INT_ALL) == 0)
+		goto out;
+
+	switch (i2c->state) {
+	case STATE_START:
+		rk3x_i2c_handle_start(i2c, ipd);
+		break;
+	case STATE_WRITE:
+		rk3x_i2c_handle_write(i2c, ipd);
+		break;
+	case STATE_READ:
+		rk3x_i2c_handle_read(i2c, ipd);
+		break;
+	case STATE_STOP:
+		rk3x_i2c_handle_stop(i2c, ipd);
+		break;
+	case STATE_IDLE:
+		break;
+	}
+
+out:
+	spin_unlock(&i2c->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * Get timing values of I2C specification
+ *
+ * @speed: Desired SCL frequency
+ *
+ * Returns: Matched i2c spec values.
+ */
+static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
+{
+	if (speed <= 100000)
+		return &standard_mode_spec;
+	else if (speed <= 400000)
+		return &fast_mode_spec;
+	else
+		return &fast_mode_plus_spec;
+}
+
+/**
+ * Calculate divider values for desired SCL frequency
+ *
+ * @clk_rate: I2C input clock rate
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
+ *
+ * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * a best-effort divider value is returned in divs. If the target rate is
+ * too high, we silently use the highest possible rate.
+ */
+static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
+				    struct i2c_timings *t,
+				    struct rk3x_i2c_calced_timings *t_calc)
+{
+	unsigned long min_low_ns, min_high_ns;
+	unsigned long max_low_ns, min_total_ns;
+
+	unsigned long clk_rate_khz, scl_rate_khz;
+
+	unsigned long min_low_div, min_high_div;
+	unsigned long max_low_div;
+
+	unsigned long min_div_for_hold, min_total_div;
+	unsigned long extra_div, extra_low_div, ideal_low_div;
+
+	unsigned long data_hold_buffer_ns = 50;
+	const struct i2c_spec_values *spec;
+	int ret = 0;
+
+	/* Only support standard-mode and fast-mode */
+	if (WARN_ON(t->bus_freq_hz > 400000))
+		t->bus_freq_hz = 400000;
+
+	/* prevent scl_rate_khz from becoming 0 */
+	if (WARN_ON(t->bus_freq_hz < 1000))
+		t->bus_freq_hz = 1000;
+
+	/*
+	 * min_low_ns:  The minimum number of ns we need to hold low to
+	 *		meet I2C specification, should include fall time.
+	 * min_high_ns: The minimum number of ns we need to hold high to
+	 *		meet I2C specification, should include rise time.
+	 * max_low_ns:  The maximum number of ns we can hold low to meet
+	 *		I2C specification.
+	 *
+	 * Note: max_low_ns should be (maximum data hold time * 2 - buffer)
+	 *	 This is because the i2c host on Rockchip holds the data line
+	 *	 for half the low time.
+	 */
+	spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+	min_high_ns = t->scl_rise_ns + spec->min_high_ns;
+
+	/*
+	 * Timings for repeated start:
+	 * - controller appears to drop SDA at .875x (7/8) programmed clk high.
+	 * - controller appears to keep SCL high for 2x programmed clk high.
+	 *
+	 * We need to account for those rules in picking our "high" time so
+	 * we meet tSU;STA and tHD;STA times.
+	 */
+	min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+		(t->scl_rise_ns + spec->min_setup_start_ns) * 1000, 875));
+	min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+		(t->scl_rise_ns + spec->min_setup_start_ns + t->sda_fall_ns +
+		spec->min_high_ns), 2));
+
+	min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+	max_low_ns =  spec->max_data_hold_ns * 2 - data_hold_buffer_ns;
+	min_total_ns = min_low_ns + min_high_ns;
+
+	/* Adjust to avoid overflow */
+	clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000);
+	scl_rate_khz = t->bus_freq_hz / 1000;
+
+	/*
+	 * We need the total div to be >= this number
+	 * so we don't clock too fast.
+	 */
+	min_total_div = DIV_ROUND_UP(clk_rate_khz, scl_rate_khz * 8);
+
+	/* These are the min dividers needed for min hold times. */
+	min_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, 8 * 1000000);
+	min_high_div = DIV_ROUND_UP(clk_rate_khz * min_high_ns, 8 * 1000000);
+	min_div_for_hold = (min_low_div + min_high_div);
+
+	/*
+	 * This is the maximum divider so we don't go over the maximum.
+	 * We don't round up here (we round down) since this is a maximum.
+	 */
+	max_low_div = clk_rate_khz * max_low_ns / (8 * 1000000);
+
+	if (min_low_div > max_low_div) {
+		WARN_ONCE(true,
+			  "Conflicting, min_low_div %lu, max_low_div %lu\n",
+			  min_low_div, max_low_div);
+		max_low_div = min_low_div;
+	}
+
+	if (min_div_for_hold > min_total_div) {
+		/*
+		 * Time needed to meet hold requirements is important.
+		 * Just use that.
+		 */
+		t_calc->div_low = min_low_div;
+		t_calc->div_high = min_high_div;
+	} else {
+		/*
+		 * We've got to distribute some time among the low and high
+		 * so we don't run too fast.
+		 */
+		extra_div = min_total_div - min_div_for_hold;
+
+		/*
+		 * We'll try to split things up perfectly evenly,
+		 * biasing slightly towards having a higher div
+		 * for low (spend more time low).
+		 */
+		ideal_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns,
+					     scl_rate_khz * 8 * min_total_ns);
+
+		/* Don't allow it to go over the maximum */
+		if (ideal_low_div > max_low_div)
+			ideal_low_div = max_low_div;
+
+		/*
+		 * Handle when the ideal low div is going to take up
+		 * more than we have.
+		 */
+		if (ideal_low_div > min_low_div + extra_div)
+			ideal_low_div = min_low_div + extra_div;
+
+		/* Give low the "ideal" and give high whatever extra is left */
+		extra_low_div = ideal_low_div - min_low_div;
+		t_calc->div_low = ideal_low_div;
+		t_calc->div_high = min_high_div + (extra_div - extra_low_div);
+	}
+
+	/*
+	 * Adjust to the fact that the hardware has an implicit "+1".
+	 * NOTE: Above calculations always produce div_low > 0 and div_high > 0.
+	 */
+	t_calc->div_low--;
+	t_calc->div_high--;
+
+	/* Give the tuning value 0, that would not update con register */
+	t_calc->tuning = 0;
+	/* Maximum divider supported by hw is 0xffff */
+	if (t_calc->div_low > 0xffff) {
+		t_calc->div_low = 0xffff;
+		ret = -EINVAL;
+	}
+
+	if (t_calc->div_high > 0xffff) {
+		t_calc->div_high = 0xffff;
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * Calculate timing values for desired SCL frequency
+ *
+ * @clk_rate: I2C input clock rate
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
+ *
+ * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * a best-effort divider value is returned in divs. If the target rate is
+ * too high, we silently use the highest possible rate.
+ * The following formulas are v1's method to calculate timings.
+ *
+ * l = divl + 1;
+ * h = divh + 1;
+ * s = sda_update_config + 1;
+ * u = start_setup_config + 1;
+ * p = stop_setup_config + 1;
+ * T = Tclk_i2c;
+ *
+ * tHigh = 8 * h * T;
+ * tLow = 8 * l * T;
+ *
+ * tHD;sda = (l * s + 1) * T;
+ * tSU;sda = [(8 - s) * l + 1] * T;
+ * tI2C = 8 * (l + h) * T;
+ *
+ * tSU;sta = (8h * u + 1) * T;
+ * tHD;sta = [8h * (u + 1) - 1] * T;
+ * tSU;sto = (8h * p + 1) * T;
+ */
+static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
+				    struct i2c_timings *t,
+				    struct rk3x_i2c_calced_timings *t_calc)
+{
+	unsigned long min_low_ns, min_high_ns;
+	unsigned long min_setup_start_ns, min_setup_data_ns;
+	unsigned long min_setup_stop_ns, max_hold_data_ns;
+
+	unsigned long clk_rate_khz, scl_rate_khz;
+
+	unsigned long min_low_div, min_high_div;
+
+	unsigned long min_div_for_hold, min_total_div;
+	unsigned long extra_div, extra_low_div;
+	unsigned long sda_update_cfg, stp_sta_cfg, stp_sto_cfg;
+
+	const struct i2c_spec_values *spec;
+	int ret = 0;
+
+	/* Support standard-mode, fast-mode and fast-mode plus */
+	if (WARN_ON(t->bus_freq_hz > 1000000))
+		t->bus_freq_hz = 1000000;
+
+	/* prevent scl_rate_khz from becoming 0 */
+	if (WARN_ON(t->bus_freq_hz < 1000))
+		t->bus_freq_hz = 1000;
+
+	/*
+	 * min_low_ns: The minimum number of ns we need to hold low to
+	 *	       meet I2C specification, should include fall time.
+	 * min_high_ns: The minimum number of ns we need to hold high to
+	 *	        meet I2C specification, should include rise time.
+	 */
+	spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+
+	/* calculate min-divh and min-divl */
+	clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000);
+	scl_rate_khz = t->bus_freq_hz / 1000;
+	min_total_div = DIV_ROUND_UP(clk_rate_khz, scl_rate_khz * 8);
+
+	min_high_ns = t->scl_rise_ns + spec->min_high_ns;
+	min_high_div = DIV_ROUND_UP(clk_rate_khz * min_high_ns, 8 * 1000000);
+
+	min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+	min_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, 8 * 1000000);
+
+	/*
+	 * Final divh and divl must be greater than 0, otherwise the
+	 * hardware would not output the i2c clk.
+	 */
+	min_high_div = (min_high_div < 1) ? 2 : min_high_div;
+	min_low_div = (min_low_div < 1) ? 2 : min_low_div;
+
+	/* These are the min dividers needed for min hold times. */
+	min_div_for_hold = (min_low_div + min_high_div);
+
+	/*
+	 * This is the maximum divider so we don't go over the maximum.
+	 * We don't round up here (we round down) since this is a maximum.
+	 */
+	if (min_div_for_hold >= min_total_div) {
+		/*
+		 * Time needed to meet hold requirements is important.
+		 * Just use that.
+		 */
+		t_calc->div_low = min_low_div;
+		t_calc->div_high = min_high_div;
+	} else {
+		/*
+		 * We've got to distribute some time among the low and high
+		 * so we don't run too fast.
+		 * We'll try to split things up by the scale of min_low_div and
+		 * min_high_div, biasing slightly towards having a higher div
+		 * for low (spend more time low).
+		 */
+		extra_div = min_total_div - min_div_for_hold;
+		extra_low_div = DIV_ROUND_UP(min_low_div * extra_div,
+					     min_div_for_hold);
+
+		t_calc->div_low = min_low_div + extra_low_div;
+		t_calc->div_high = min_high_div + (extra_div - extra_low_div);
+	}
+
+	/*
+	 * calculate sda data hold count by the rules, data_upd_st:3
+	 * is a appropriate value to reduce calculated times.
+	 */
+	for (sda_update_cfg = 3; sda_update_cfg > 0; sda_update_cfg--) {
+		max_hold_data_ns =  DIV_ROUND_UP((sda_update_cfg
+						 * (t_calc->div_low) + 1)
+						 * 1000000, clk_rate_khz);
+		min_setup_data_ns =  DIV_ROUND_UP(((8 - sda_update_cfg)
+						 * (t_calc->div_low) + 1)
+						 * 1000000, clk_rate_khz);
+		if ((max_hold_data_ns < spec->max_data_hold_ns) &&
+		    (min_setup_data_ns > spec->min_data_setup_ns))
+			break;
+	}
+
+	/* calculate setup start config */
+	min_setup_start_ns = t->scl_rise_ns + spec->min_setup_start_ns;
+	stp_sta_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_start_ns
+			   - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+	/* calculate setup stop config */
+	min_setup_stop_ns = t->scl_rise_ns + spec->min_setup_stop_ns;
+	stp_sto_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_stop_ns
+			   - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+	t_calc->tuning = REG_CON_SDA_CFG(--sda_update_cfg) |
+			 REG_CON_STA_CFG(--stp_sta_cfg) |
+			 REG_CON_STO_CFG(--stp_sto_cfg);
+
+	t_calc->div_low--;
+	t_calc->div_high--;
+
+	/* Maximum divider supported by hw is 0xffff */
+	if (t_calc->div_low > 0xffff) {
+		t_calc->div_low = 0xffff;
+		ret = -EINVAL;
+	}
+
+	if (t_calc->div_high > 0xffff) {
+		t_calc->div_high = 0xffff;
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
+{
+	struct i2c_timings *t = &i2c->t;
+	struct rk3x_i2c_calced_timings calc;
+	u64 t_low_ns, t_high_ns;
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	ret = i2c->soc_data->calc_timings(clk_rate, t, &calc);
+	WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz);
+
+	clk_enable(i2c->pclk);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	val = i2c_readl(i2c, REG_CON);
+	val &= ~REG_CON_TUNING_MASK;
+	val |= calc.tuning;
+	i2c_writel(i2c, val, REG_CON);
+	i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff),
+		   REG_CLKDIV);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	clk_disable(i2c->pclk);
+
+	t_low_ns = div_u64(((u64)calc.div_low + 1) * 8 * 1000000000, clk_rate);
+	t_high_ns = div_u64(((u64)calc.div_high + 1) * 8 * 1000000000,
+			    clk_rate);
+	dev_dbg(i2c->dev,
+		"CLK %lukhz, Req %uns, Act low %lluns high %lluns\n",
+		clk_rate / 1000,
+		1000000000 / t->bus_freq_hz,
+		t_low_ns, t_high_ns);
+}
+
+/**
+ * rk3x_i2c_clk_notifier_cb - Clock rate change callback
+ * @nb:		Pointer to notifier block
+ * @event:	Notification reason
+ * @data:	Pointer to notification data object
+ *
+ * The callback checks whether a valid bus frequency can be generated after the
+ * change. If so, the change is acknowledged, otherwise the change is aborted.
+ * New dividers are written to the HW in the pre- or post change notification
+ * depending on the scaling direction.
+ *
+ * Code adapted from i2c-cadence.c.
+ *
+ * Return:	NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
+ *		to acknowledge the change, NOTIFY_DONE if the notification is
+ *		considered irrelevant.
+ */
+static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
+				    event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb);
+	struct rk3x_i2c_calced_timings calc;
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		/*
+		 * Try the calculation (but don't store the result) ahead of
+		 * time to see if we need to block the clock change.  Timings
+		 * shouldn't actually take effect until rk3x_i2c_adapt_div().
+		 */
+		if (i2c->soc_data->calc_timings(ndata->new_rate, &i2c->t,
+						&calc) != 0)
+			return NOTIFY_STOP;
+
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			rk3x_i2c_adapt_div(i2c, ndata->new_rate);
+
+		return NOTIFY_OK;
+	case POST_RATE_CHANGE:
+		/* scale down */
+		if (ndata->new_rate < ndata->old_rate)
+			rk3x_i2c_adapt_div(i2c, ndata->new_rate);
+		return NOTIFY_OK;
+	case ABORT_RATE_CHANGE:
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			rk3x_i2c_adapt_div(i2c, ndata->old_rate);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+/**
+ * Setup I2C registers for an I2C operation specified by msgs, num.
+ *
+ * Must be called with i2c->lock held.
+ *
+ * @msgs: I2C msgs to process
+ * @num: Number of msgs
+ *
+ * returns: Number of I2C msgs processed or negative in case of error
+ */
+static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
+{
+	u32 addr = (msgs[0].addr & 0x7f) << 1;
+	int ret = 0;
+
+	/*
+	 * The I2C adapter can issue a small (len < 4) write packet before
+	 * reading. This speeds up SMBus-style register reads.
+	 * The MRXADDR/MRXRADDR hold the slave address and the slave register
+	 * address in this case.
+	 */
+
+	if (num >= 2 && msgs[0].len < 4 &&
+	    !(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD)) {
+		u32 reg_addr = 0;
+		int i;
+
+		dev_dbg(i2c->dev, "Combined write/read from addr 0x%x\n",
+			addr >> 1);
+
+		/* Fill MRXRADDR with the register address(es) */
+		for (i = 0; i < msgs[0].len; ++i) {
+			reg_addr |= msgs[0].buf[i] << (i * 8);
+			reg_addr |= REG_MRXADDR_VALID(i);
+		}
+
+		/* msgs[0] is handled by hw. */
+		i2c->msg = &msgs[1];
+
+		i2c->mode = REG_CON_MOD_REGISTER_TX;
+
+		i2c_writel(i2c, addr | REG_MRXADDR_VALID(0), REG_MRXADDR);
+		i2c_writel(i2c, reg_addr, REG_MRXRADDR);
+
+		ret = 2;
+	} else {
+		/*
+		 * We'll have to do it the boring way and process the msgs
+		 * one-by-one.
+		 */
+
+		if (msgs[0].flags & I2C_M_RD) {
+			addr |= 1; /* set read bit */
+
+			/*
+			 * We have to transmit the slave addr first. Use
+			 * MOD_REGISTER_TX for that purpose.
+			 */
+			i2c->mode = REG_CON_MOD_REGISTER_TX;
+			i2c_writel(i2c, addr | REG_MRXADDR_VALID(0),
+				   REG_MRXADDR);
+			i2c_writel(i2c, 0, REG_MRXRADDR);
+		} else {
+			i2c->mode = REG_CON_MOD_TX;
+		}
+
+		i2c->msg = &msgs[0];
+
+		ret = 1;
+	}
+
+	i2c->addr = msgs[0].addr;
+	i2c->busy = true;
+	i2c->state = STATE_START;
+	i2c->processed = 0;
+	i2c->error = 0;
+
+	rk3x_i2c_clean_ipd(i2c);
+
+	return ret;
+}
+
+static int rk3x_i2c_xfer(struct i2c_adapter *adap,
+			 struct i2c_msg *msgs, int num)
+{
+	struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
+	unsigned long timeout, flags;
+	u32 val;
+	int ret = 0;
+	int i;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	clk_enable(i2c->clk);
+	clk_enable(i2c->pclk);
+
+	i2c->is_last_msg = false;
+
+	/*
+	 * Process msgs. We can handle more than one message at once (see
+	 * rk3x_i2c_setup()).
+	 */
+	for (i = 0; i < num; i += ret) {
+		ret = rk3x_i2c_setup(i2c, msgs + i, num - i);
+
+		if (ret < 0) {
+			dev_err(i2c->dev, "rk3x_i2c_setup() failed\n");
+			break;
+		}
+
+		if (i + ret >= num)
+			i2c->is_last_msg = true;
+
+		spin_unlock_irqrestore(&i2c->lock, flags);
+
+		rk3x_i2c_start(i2c);
+
+		timeout = wait_event_timeout(i2c->wait, !i2c->busy,
+					     msecs_to_jiffies(WAIT_TIMEOUT));
+
+		spin_lock_irqsave(&i2c->lock, flags);
+
+		if (timeout == 0) {
+			dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
+				i2c_readl(i2c, REG_IPD), i2c->state);
+
+			/* Force a STOP condition without interrupt */
+			i2c_writel(i2c, 0, REG_IEN);
+			val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+			val |= REG_CON_EN | REG_CON_STOP;
+			i2c_writel(i2c, val, REG_CON);
+
+			i2c->state = STATE_IDLE;
+
+			ret = -ETIMEDOUT;
+			break;
+		}
+
+		if (i2c->error) {
+			ret = i2c->error;
+			break;
+		}
+	}
+
+	clk_disable(i2c->pclk);
+	clk_disable(i2c->clk);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	return ret < 0 ? ret : num;
+}
+
+static __maybe_unused int rk3x_i2c_resume(struct device *dev)
+{
+	struct rk3x_i2c *i2c = dev_get_drvdata(dev);
+
+	rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk));
+
+	return 0;
+}
+
+static u32 rk3x_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+static const struct i2c_algorithm rk3x_i2c_algorithm = {
+	.master_xfer		= rk3x_i2c_xfer,
+	.functionality		= rk3x_i2c_func,
+};
+
+static const struct rk3x_i2c_soc_data rv1108_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v1_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3066_soc_data = {
+	.grf_offset = 0x154,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3188_soc_data = {
+	.grf_offset = 0x0a4,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3228_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3288_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3399_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v1_calc_timings,
+};
+
+static const struct of_device_id rk3x_i2c_match[] = {
+	{
+		.compatible = "rockchip,rv1108-i2c",
+		.data = (void *)&rv1108_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3066-i2c",
+		.data = (void *)&rk3066_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3188-i2c",
+		.data = (void *)&rk3188_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3228-i2c",
+		.data = (void *)&rk3228_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3288-i2c",
+		.data = (void *)&rk3288_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3399-i2c",
+		.data = (void *)&rk3399_soc_data
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rk3x_i2c_match);
+
+static int rk3x_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct rk3x_i2c *i2c;
+	struct resource *mem;
+	int ret = 0;
+	int bus_nr;
+	u32 value;
+	int irq;
+	unsigned long clk_rate;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct rk3x_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	match = of_match_node(rk3x_i2c_match, np);
+	i2c->soc_data = (struct rk3x_i2c_soc_data *)match->data;
+
+	/* use common interface to get I2C timing properties */
+	i2c_parse_fw_timings(&pdev->dev, &i2c->t, true);
+
+	strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name));
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &rk3x_i2c_algorithm;
+	i2c->adap.retries = 3;
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+
+	i2c->dev = &pdev->dev;
+
+	spin_lock_init(&i2c->lock);
+	init_waitqueue_head(&i2c->wait);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	/* Try to set the I2C adapter number from dt */
+	bus_nr = of_alias_get_id(np, "i2c");
+
+	/*
+	 * Switch to new interface if the SoC also offers the old one.
+	 * The control bit is located in the GRF register space.
+	 */
+	if (i2c->soc_data->grf_offset >= 0) {
+		struct regmap *grf;
+
+		grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+		if (IS_ERR(grf)) {
+			dev_err(&pdev->dev,
+				"rk3x-i2c needs 'rockchip,grf' property\n");
+			return PTR_ERR(grf);
+		}
+
+		if (bus_nr < 0) {
+			dev_err(&pdev->dev, "rk3x-i2c needs i2cX alias");
+			return -EINVAL;
+		}
+
+		/* 27+i: write mask, 11+i: value */
+		value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
+
+		ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
+		if (ret != 0) {
+			dev_err(i2c->dev, "Could not write to GRF: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* IRQ setup */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "cannot find rk3x IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, rk3x_i2c_irq,
+			       0, dev_name(&pdev->dev), i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot request IRQ\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, i2c);
+
+	if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
+		/* Only one clock to use for bus clock and peripheral clock */
+		i2c->clk = devm_clk_get(&pdev->dev, NULL);
+		i2c->pclk = i2c->clk;
+	} else {
+		i2c->clk = devm_clk_get(&pdev->dev, "i2c");
+		i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
+	}
+
+	if (IS_ERR(i2c->clk)) {
+		ret = PTR_ERR(i2c->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret);
+		return ret;
+	}
+	if (IS_ERR(i2c->pclk)) {
+		ret = PTR_ERR(i2c->pclk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Can't get periph clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare(i2c->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Can't prepare bus clk: %d\n", ret);
+		return ret;
+	}
+	ret = clk_prepare(i2c->pclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Can't prepare periph clock: %d\n", ret);
+		goto err_clk;
+	}
+
+	i2c->clk_rate_nb.notifier_call = rk3x_i2c_clk_notifier_cb;
+	ret = clk_notifier_register(i2c->clk, &i2c->clk_rate_nb);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Unable to register clock notifier\n");
+		goto err_pclk;
+	}
+
+	clk_rate = clk_get_rate(i2c->clk);
+	rk3x_i2c_adapt_div(i2c, clk_rate);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0)
+		goto err_clk_notifier;
+
+	dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);
+
+	return 0;
+
+err_clk_notifier:
+	clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+err_pclk:
+	clk_unprepare(i2c->pclk);
+err_clk:
+	clk_unprepare(i2c->clk);
+	return ret;
+}
+
+static int rk3x_i2c_remove(struct platform_device *pdev)
+{
+	struct rk3x_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+	clk_unprepare(i2c->pclk);
+	clk_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rk3x_i2c_pm_ops, NULL, rk3x_i2c_resume);
+
+static struct platform_driver rk3x_i2c_driver = {
+	.probe   = rk3x_i2c_probe,
+	.remove  = rk3x_i2c_remove,
+	.driver  = {
+		.name  = "rk3x-i2c",
+		.of_match_table = rk3x_i2c_match,
+		.pm = &rk3x_i2c_pm_ops,
+	},
+};
+
+module_platform_driver(rk3x_i2c_driver);
+
+MODULE_DESCRIPTION("Rockchip RK3xxx I2C Bus driver");
+MODULE_AUTHOR("Max Schwarz <max.schwarz@online.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-robotfuzz-osif.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-robotfuzz-osif.c
new file mode 100644
index 0000000..9c0f52b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -0,0 +1,202 @@
+/*
+ * Driver for RobotFuzz OSIF
+ *
+ * Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch>
+ * Copyright (c) 2007 Barry Carter <Barry.Carter@robotfuzz.com>
+ *
+ * Based on the i2c-tiny-usb by
+ *
+ * Copyright (C) 2006 Til Harbaum (Till@Harbaum.org)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#define OSIFI2C_READ		20
+#define OSIFI2C_WRITE		21
+#define OSIFI2C_STOP		22
+#define OSIFI2C_STATUS		23
+#define OSIFI2C_SET_BIT_RATE	24
+
+#define STATUS_ADDRESS_ACK	0
+#define STATUS_ADDRESS_NAK	2
+
+struct osif_priv {
+	struct usb_device *usb_dev;
+	struct usb_interface *interface;
+	struct i2c_adapter adapter;
+	unsigned char status;
+};
+
+static int osif_usb_read(struct i2c_adapter *adapter, int cmd,
+			 int value, int index, void *data, int len)
+{
+	struct osif_priv *priv = adapter->algo_data;
+
+	return usb_control_msg(priv->usb_dev, usb_rcvctrlpipe(priv->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+			       USB_DIR_IN, value, index, data, len, 2000);
+}
+
+static int osif_usb_write(struct i2c_adapter *adapter, int cmd,
+			  int value, int index, void *data, int len)
+{
+
+	struct osif_priv *priv = adapter->algo_data;
+
+	return usb_control_msg(priv->usb_dev, usb_sndctrlpipe(priv->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			       value, index, data, len, 2000);
+}
+
+static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+			 int num)
+{
+	struct osif_priv *priv = adapter->algo_data;
+	struct i2c_msg *pmsg;
+	int ret = 0;
+	int i, cmd;
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+
+		if (pmsg->flags & I2C_M_RD) {
+			cmd = OSIFI2C_READ;
+
+			ret = osif_usb_read(adapter, cmd, pmsg->flags,
+					    pmsg->addr, pmsg->buf,
+					    pmsg->len);
+			if (ret != pmsg->len) {
+				dev_err(&adapter->dev, "failure reading data\n");
+				return -EREMOTEIO;
+			}
+		} else {
+			cmd = OSIFI2C_WRITE;
+
+			ret = osif_usb_write(adapter, cmd, pmsg->flags,
+					     pmsg->addr, pmsg->buf, pmsg->len);
+			if (ret != pmsg->len) {
+				dev_err(&adapter->dev, "failure writing data\n");
+				return -EREMOTEIO;
+			}
+		}
+
+		ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
+		if (ret) {
+			dev_err(&adapter->dev, "failure sending STOP\n");
+			return -EREMOTEIO;
+		}
+
+		/* read status */
+		ret = osif_usb_read(adapter, OSIFI2C_STATUS, 0, 0,
+				    &priv->status, 1);
+		if (ret != 1) {
+			dev_err(&adapter->dev, "failure reading status\n");
+			return -EREMOTEIO;
+		}
+
+		if (priv->status != STATUS_ADDRESS_ACK) {
+			dev_dbg(&adapter->dev, "status = %d\n", priv->status);
+			return -EREMOTEIO;
+		}
+	}
+
+	return i;
+}
+
+static u32 osif_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm osif_algorithm = {
+	.master_xfer	= osif_xfer,
+	.functionality	= osif_func,
+};
+
+#define USB_OSIF_VENDOR_ID	0x1964
+#define USB_OSIF_PRODUCT_ID	0x0001
+
+static const struct usb_device_id osif_table[] = {
+	{ USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, osif_table);
+
+static int osif_probe(struct usb_interface *interface,
+			     const struct usb_device_id *id)
+{
+	int ret;
+	struct osif_priv *priv;
+	u16 version;
+
+	priv = devm_kzalloc(&interface->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+	priv->interface = interface;
+
+	usb_set_intfdata(interface, priv);
+
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = I2C_CLASS_HWMON;
+	priv->adapter.algo = &osif_algorithm;
+	priv->adapter.algo_data = priv;
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		 "OSIF at bus %03d device %03d",
+		 priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+	/*
+	 * Set bus frequency. The frequency is:
+	 * 120,000,000 / ( 16 + 2 * div * 4^prescale).
+	 * Using dev = 52, prescale = 0 give 100KHz */
+	ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
+			    NULL, 0);
+	if (ret) {
+		dev_err(&interface->dev, "failure sending bit rate");
+		usb_put_dev(priv->usb_dev);
+		return ret;
+	}
+
+	i2c_add_adapter(&(priv->adapter));
+
+	version = le16_to_cpu(priv->usb_dev->descriptor.bcdDevice);
+	dev_info(&interface->dev,
+		 "version %x.%02x found at bus %03d address %03d",
+		 version >> 8, version & 0xff,
+		 priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+	return 0;
+}
+
+static void osif_disconnect(struct usb_interface *interface)
+{
+	struct osif_priv *priv = usb_get_intfdata(interface);
+
+	i2c_del_adapter(&(priv->adapter));
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(priv->usb_dev);
+}
+
+static struct usb_driver osif_driver = {
+	.name		= "RobotFuzz Open Source InterFace, OSIF",
+	.probe		= osif_probe,
+	.disconnect	= osif_disconnect,
+	.id_table	= osif_table,
+};
+
+module_usb_driver(osif_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_AUTHOR("Barry Carter <barry.carter@robotfuzz.com>");
+MODULE_DESCRIPTION("RobotFuzz OSIF driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-s3c2410.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-s3c2410.c
new file mode 100644
index 0000000..5d97510
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-s3c2410.c
@@ -0,0 +1,1314 @@
+/* linux/drivers/i2c/busses/i2c-s3c2410.c
+ *
+ * Copyright (C) 2004,2005,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 I2C Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <asm/irq.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICCON			0x00
+#define S3C2410_IICSTAT			0x04
+#define S3C2410_IICADD			0x08
+#define S3C2410_IICDS			0x0C
+#define S3C2440_IICLC			0x10
+
+#define S3C2410_IICCON_ACKEN		(1 << 7)
+#define S3C2410_IICCON_TXDIV_16		(0 << 6)
+#define S3C2410_IICCON_TXDIV_512	(1 << 6)
+#define S3C2410_IICCON_IRQEN		(1 << 5)
+#define S3C2410_IICCON_IRQPEND		(1 << 4)
+#define S3C2410_IICCON_SCALE(x)		((x) & 0xf)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2 << 6)
+#define S3C2410_IICSTAT_MASTER_TX	(3 << 6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0 << 6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1 << 6)
+#define S3C2410_IICSTAT_MODEMASK	(3 << 6)
+
+#define S3C2410_IICSTAT_START		(1 << 5)
+#define S3C2410_IICSTAT_BUSBUSY		(1 << 5)
+#define S3C2410_IICSTAT_TXRXEN		(1 << 4)
+#define S3C2410_IICSTAT_ARBITR		(1 << 3)
+#define S3C2410_IICSTAT_ASSLAVE		(1 << 2)
+#define S3C2410_IICSTAT_ADDR0		(1 << 1)
+#define S3C2410_IICSTAT_LASTBIT		(1 << 0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1 << 2)
+
+/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
+#define QUIRK_S3C2440		(1 << 0)
+#define QUIRK_HDMIPHY		(1 << 1)
+#define QUIRK_NO_GPIO		(1 << 2)
+#define QUIRK_POLL		(1 << 3)
+
+/* Max time to wait for bus to become idle after a xfer (in us) */
+#define S3C2410_IDLE_TIMEOUT	5000
+
+/* Exynos5 Sysreg offset */
+#define EXYNOS5_SYS_I2C_CFG	0x0234
+
+/* i2c controller state */
+enum s3c24xx_i2c_state {
+	STATE_IDLE,
+	STATE_START,
+	STATE_READ,
+	STATE_WRITE,
+	STATE_STOP
+};
+
+struct s3c24xx_i2c {
+	wait_queue_head_t	wait;
+	kernel_ulong_t		quirks;
+	unsigned int		suspended:1;
+
+	struct i2c_msg		*msg;
+	unsigned int		msg_num;
+	unsigned int		msg_idx;
+	unsigned int		msg_ptr;
+
+	unsigned int		tx_setup;
+	unsigned int		irq;
+
+	enum s3c24xx_i2c_state	state;
+	unsigned long		clkrate;
+
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct device		*dev;
+	struct i2c_adapter	adap;
+
+	struct s3c2410_platform_i2c	*pdata;
+	int			gpios[2];
+	struct pinctrl          *pctrl;
+#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
+	struct notifier_block	freq_transition;
+#endif
+	struct regmap		*sysreg;
+	unsigned int		sys_i2c_cfg;
+};
+
+static const struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-i2c",
+		.driver_data	= 0,
+	}, {
+		.name		= "s3c2440-i2c",
+		.driver_data	= QUIRK_S3C2440,
+	}, {
+		.name		= "s3c2440-hdmiphy-i2c",
+		.driver_data	= QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
+	}, { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
+	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
+	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
+	{ .compatible = "samsung,exynos5440-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
+	{ .compatible = "samsung,exynos5-sata-phy-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#endif
+
+/*
+ * Get controller type either from device tree or platform device variant.
+ */
+static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
+		return (kernel_ulong_t)match->data;
+	}
+
+	return platform_get_device_id(pdev)->driver_data;
+}
+
+/*
+ * Complete the message and wake up the caller, using the given return code,
+ * or zero to mean ok.
+ */
+static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
+{
+	dev_dbg(i2c->dev, "master_complete %d\n", ret);
+
+	i2c->msg_ptr = 0;
+	i2c->msg = NULL;
+	i2c->msg_idx++;
+	i2c->msg_num = 0;
+	if (ret)
+		i2c->msg_idx = ret;
+
+	if (!(i2c->quirks & QUIRK_POLL))
+		wake_up(&i2c->wait);
+}
+
+static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
+}
+
+static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
+}
+
+/* irq enable/disable functions */
+static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
+}
+
+static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
+}
+
+static bool is_ack(struct s3c24xx_i2c *i2c)
+{
+	int tries;
+
+	for (tries = 50; tries; --tries) {
+		if (readl(i2c->regs + S3C2410_IICCON)
+			& S3C2410_IICCON_IRQPEND) {
+			if (!(readl(i2c->regs + S3C2410_IICSTAT)
+				& S3C2410_IICSTAT_LASTBIT))
+				return true;
+		}
+		usleep_range(1000, 2000);
+	}
+	dev_err(i2c->dev, "ack was not received\n");
+	return false;
+}
+
+/*
+ * put the start of a message onto the bus
+ */
+static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
+				      struct i2c_msg *msg)
+{
+	unsigned int addr = (msg->addr & 0x7f) << 1;
+	unsigned long stat;
+	unsigned long iiccon;
+
+	stat = 0;
+	stat |=  S3C2410_IICSTAT_TXRXEN;
+
+	if (msg->flags & I2C_M_RD) {
+		stat |= S3C2410_IICSTAT_MASTER_RX;
+		addr |= 1;
+	} else
+		stat |= S3C2410_IICSTAT_MASTER_TX;
+
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
+	/* todo - check for whether ack wanted or not */
+	s3c24xx_i2c_enable_ack(i2c);
+
+	iiccon = readl(i2c->regs + S3C2410_IICCON);
+	writel(stat, i2c->regs + S3C2410_IICSTAT);
+
+	dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
+	writeb(addr, i2c->regs + S3C2410_IICDS);
+
+	/*
+	 * delay here to ensure the data byte has gotten onto the bus
+	 * before the transaction is started
+	 */
+	ndelay(i2c->tx_setup);
+
+	dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
+	writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+	stat |= S3C2410_IICSTAT_START;
+	writel(stat, i2c->regs + S3C2410_IICSTAT);
+
+	if (i2c->quirks & QUIRK_POLL) {
+		while ((i2c->msg_num != 0) && is_ack(i2c)) {
+			i2c_s3c_irq_nextbyte(i2c, stat);
+			stat = readl(i2c->regs + S3C2410_IICSTAT);
+
+			if (stat & S3C2410_IICSTAT_ARBITR)
+				dev_err(i2c->dev, "deal with arbitration loss\n");
+		}
+	}
+}
+
+static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
+{
+	unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+
+	dev_dbg(i2c->dev, "STOP\n");
+
+	/*
+	 * The datasheet says that the STOP sequence should be:
+	 *  1) I2CSTAT.5 = 0	- Clear BUSY (or 'generate STOP')
+	 *  2) I2CCON.4 = 0	- Clear IRQPEND
+	 *  3) Wait until the stop condition takes effect.
+	 *  4*) I2CSTAT.4 = 0	- Clear TXRXEN
+	 *
+	 * Where, step "4*" is only for buses with the "HDMIPHY" quirk.
+	 *
+	 * However, after much experimentation, it appears that:
+	 * a) normal buses automatically clear BUSY and transition from
+	 *    Master->Slave when they complete generating a STOP condition.
+	 *    Therefore, step (3) can be done in doxfer() by polling I2CCON.4
+	 *    after starting the STOP generation here.
+	 * b) HDMIPHY bus does neither, so there is no way to do step 3.
+	 *    There is no indication when this bus has finished generating
+	 *    STOP.
+	 *
+	 * In fact, we have found that as soon as the IRQPEND bit is cleared in
+	 * step 2, the HDMIPHY bus generates the STOP condition, and then
+	 * immediately starts transferring another data byte, even though the
+	 * bus is supposedly stopped.  This is presumably because the bus is
+	 * still in "Master" mode, and its BUSY bit is still set.
+	 *
+	 * To avoid these extra post-STOP transactions on HDMI phy devices, we
+	 * just disable Serial Output on the bus (I2CSTAT.4 = 0) directly,
+	 * instead of first generating a proper STOP condition.  This should
+	 * float SDA & SCK terminating the transfer.  Subsequent transfers
+	 *  start with a proper START condition, and proceed normally.
+	 *
+	 * The HDMIPHY bus is an internal bus that always has exactly two
+	 * devices, the host as Master and the HDMIPHY device as the slave.
+	 * Skipping the STOP condition has been tested on this bus and works.
+	 */
+	if (i2c->quirks & QUIRK_HDMIPHY) {
+		/* Stop driving the I2C pins */
+		iicstat &= ~S3C2410_IICSTAT_TXRXEN;
+	} else {
+		/* stop the transfer */
+		iicstat &= ~S3C2410_IICSTAT_START;
+	}
+	writel(iicstat, i2c->regs + S3C2410_IICSTAT);
+
+	i2c->state = STATE_STOP;
+
+	s3c24xx_i2c_master_complete(i2c, ret);
+	s3c24xx_i2c_disable_irq(i2c);
+}
+
+/*
+ * helper functions to determine the current state in the set of
+ * messages we are sending
+ */
+
+/*
+ * returns TRUE if the current message is the last in the set
+ */
+static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
+{
+	return i2c->msg_idx >= (i2c->msg_num - 1);
+}
+
+/*
+ * returns TRUE if we this is the last byte in the current message
+ */
+static inline int is_msglast(struct s3c24xx_i2c *i2c)
+{
+	/*
+	 * msg->len is always 1 for the first byte of smbus block read.
+	 * Actual length will be read from slave. More bytes will be
+	 * read according to the length then.
+	 */
+	if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
+		return 0;
+
+	return i2c->msg_ptr == i2c->msg->len-1;
+}
+
+/*
+ * returns TRUE if we reached the end of the current message
+ */
+static inline int is_msgend(struct s3c24xx_i2c *i2c)
+{
+	return i2c->msg_ptr >= i2c->msg->len;
+}
+
+/*
+ * process an interrupt and work out what to do
+ */
+static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+{
+	unsigned long tmp;
+	unsigned char byte;
+	int ret = 0;
+
+	switch (i2c->state) {
+
+	case STATE_IDLE:
+		dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
+		goto out;
+
+	case STATE_STOP:
+		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
+		s3c24xx_i2c_disable_irq(i2c);
+		goto out_ack;
+
+	case STATE_START:
+		/*
+		 * last thing we did was send a start condition on the
+		 * bus, or started a new i2c message
+		 */
+		if (iicstat & S3C2410_IICSTAT_LASTBIT &&
+		    !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+			/* ack was not received... */
+			dev_dbg(i2c->dev, "ack was not received\n");
+			s3c24xx_i2c_stop(i2c, -ENXIO);
+			goto out_ack;
+		}
+
+		if (i2c->msg->flags & I2C_M_RD)
+			i2c->state = STATE_READ;
+		else
+			i2c->state = STATE_WRITE;
+
+		/*
+		 * Terminate the transfer if there is nothing to do
+		 * as this is used by the i2c probe to find devices.
+		 */
+		if (is_lastmsg(i2c) && i2c->msg->len == 0) {
+			s3c24xx_i2c_stop(i2c, 0);
+			goto out_ack;
+		}
+
+		if (i2c->state == STATE_READ)
+			goto prepare_read;
+
+		/*
+		 * fall through to the write state, as we will need to
+		 * send a byte as well
+		 */
+
+	case STATE_WRITE:
+		/*
+		 * we are writing data to the device... check for the
+		 * end of the message, and if so, work out what to do
+		 */
+		if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+			if (iicstat & S3C2410_IICSTAT_LASTBIT) {
+				dev_dbg(i2c->dev, "WRITE: No Ack\n");
+
+				s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
+				goto out_ack;
+			}
+		}
+
+ retry_write:
+
+		if (!is_msgend(i2c)) {
+			byte = i2c->msg->buf[i2c->msg_ptr++];
+			writeb(byte, i2c->regs + S3C2410_IICDS);
+
+			/*
+			 * delay after writing the byte to allow the
+			 * data setup time on the bus, as writing the
+			 * data to the register causes the first bit
+			 * to appear on SDA, and SCL will change as
+			 * soon as the interrupt is acknowledged
+			 */
+			ndelay(i2c->tx_setup);
+
+		} else if (!is_lastmsg(i2c)) {
+			/* we need to go to the next i2c message */
+
+			dev_dbg(i2c->dev, "WRITE: Next Message\n");
+
+			i2c->msg_ptr = 0;
+			i2c->msg_idx++;
+			i2c->msg++;
+
+			/* check to see if we need to do another message */
+			if (i2c->msg->flags & I2C_M_NOSTART) {
+
+				if (i2c->msg->flags & I2C_M_RD) {
+					/*
+					 * cannot do this, the controller
+					 * forces us to send a new START
+					 * when we change direction
+					 */
+					s3c24xx_i2c_stop(i2c, -EINVAL);
+				}
+
+				goto retry_write;
+			} else {
+				/* send the new start */
+				s3c24xx_i2c_message_start(i2c, i2c->msg);
+				i2c->state = STATE_START;
+			}
+
+		} else {
+			/* send stop */
+			s3c24xx_i2c_stop(i2c, 0);
+		}
+		break;
+
+	case STATE_READ:
+		/*
+		 * we have a byte of data in the data register, do
+		 * something with it, and then work out whether we are
+		 * going to do any more read/write
+		 */
+		byte = readb(i2c->regs + S3C2410_IICDS);
+		i2c->msg->buf[i2c->msg_ptr++] = byte;
+
+		/* Add actual length to read for smbus block read */
+		if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
+			i2c->msg->len += byte;
+ prepare_read:
+		if (is_msglast(i2c)) {
+			/* last byte of buffer */
+
+			if (is_lastmsg(i2c))
+				s3c24xx_i2c_disable_ack(i2c);
+
+		} else if (is_msgend(i2c)) {
+			/*
+			 * ok, we've read the entire buffer, see if there
+			 * is anything else we need to do
+			 */
+			if (is_lastmsg(i2c)) {
+				/* last message, send stop and complete */
+				dev_dbg(i2c->dev, "READ: Send Stop\n");
+
+				s3c24xx_i2c_stop(i2c, 0);
+			} else {
+				/* go to the next transfer */
+				dev_dbg(i2c->dev, "READ: Next Transfer\n");
+
+				i2c->msg_ptr = 0;
+				i2c->msg_idx++;
+				i2c->msg++;
+			}
+		}
+
+		break;
+	}
+
+	/* acknowlegde the IRQ and get back on with the work */
+
+ out_ack:
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	tmp &= ~S3C2410_IICCON_IRQPEND;
+	writel(tmp, i2c->regs + S3C2410_IICCON);
+ out:
+	return ret;
+}
+
+/*
+ * top level IRQ servicing routine
+ */
+static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
+{
+	struct s3c24xx_i2c *i2c = dev_id;
+	unsigned long status;
+	unsigned long tmp;
+
+	status = readl(i2c->regs + S3C2410_IICSTAT);
+
+	if (status & S3C2410_IICSTAT_ARBITR) {
+		/* deal with arbitration loss */
+		dev_err(i2c->dev, "deal with arbitration loss\n");
+	}
+
+	if (i2c->state == STATE_IDLE) {
+		dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
+
+		tmp = readl(i2c->regs + S3C2410_IICCON);
+		tmp &= ~S3C2410_IICCON_IRQPEND;
+		writel(tmp, i2c->regs +  S3C2410_IICCON);
+		goto out;
+	}
+
+	/*
+	 * pretty much this leaves us with the fact that we've
+	 * transmitted or received whatever byte we last sent
+	 */
+	i2c_s3c_irq_nextbyte(i2c, status);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+/*
+ * Disable the bus so that we won't get any interrupts from now on, or try
+ * to drive any lines. This is the default state when we don't have
+ * anything to send/receive.
+ *
+ * If there is an event on the bus, or we have a pre-existing event at
+ * kernel boot time, we may not notice the event and the I2C controller
+ * will lock the bus with the I2C clock line low indefinitely.
+ */
+static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	/* Stop driving the I2C pins */
+	tmp = readl(i2c->regs + S3C2410_IICSTAT);
+	tmp &= ~S3C2410_IICSTAT_TXRXEN;
+	writel(tmp, i2c->regs + S3C2410_IICSTAT);
+
+	/* We don't expect any interrupts now, and don't want send acks */
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	tmp &= ~(S3C2410_IICCON_IRQEN | S3C2410_IICCON_IRQPEND |
+		S3C2410_IICCON_ACKEN);
+	writel(tmp, i2c->regs + S3C2410_IICCON);
+}
+
+
+/*
+ * get the i2c bus for a master transaction
+ */
+static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
+{
+	unsigned long iicstat;
+	int timeout = 400;
+
+	while (timeout-- > 0) {
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+
+		if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * wait for the i2c bus to become idle.
+ */
+static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
+{
+	unsigned long iicstat;
+	ktime_t start, now;
+	unsigned long delay;
+	int spins;
+
+	/* ensure the stop has been through the bus */
+
+	dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+	start = now = ktime_get();
+
+	/*
+	 * Most of the time, the bus is already idle within a few usec of the
+	 * end of a transaction.  However, really slow i2c devices can stretch
+	 * the clock, delaying STOP generation.
+	 *
+	 * On slower SoCs this typically happens within a very small number of
+	 * instructions so busy wait briefly to avoid scheduling overhead.
+	 */
+	spins = 3;
+	iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
+		cpu_relax();
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	}
+
+	/*
+	 * If we do get an appreciable delay as a compromise between idle
+	 * detection latency for the normal, fast case, and system load in the
+	 * slow device case, use an exponential back off in the polling loop,
+	 * up to 1/10th of the total timeout, then continue to poll at a
+	 * constant rate up to the timeout.
+	 */
+	delay = 1;
+	while ((iicstat & S3C2410_IICSTAT_START) &&
+	       ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
+		usleep_range(delay, 2 * delay);
+		if (delay < S3C2410_IDLE_TIMEOUT / 10)
+			delay <<= 1;
+		now = ktime_get();
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	}
+
+	if (iicstat & S3C2410_IICSTAT_START)
+		dev_warn(i2c->dev, "timeout waiting for bus idle\n");
+}
+
+/*
+ * this starts an i2c transfer
+ */
+static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
+			      struct i2c_msg *msgs, int num)
+{
+	unsigned long timeout;
+	int ret;
+
+	if (i2c->suspended)
+		return -EIO;
+
+	ret = s3c24xx_i2c_set_master(i2c);
+	if (ret != 0) {
+		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	i2c->msg     = msgs;
+	i2c->msg_num = num;
+	i2c->msg_ptr = 0;
+	i2c->msg_idx = 0;
+	i2c->state   = STATE_START;
+
+	s3c24xx_i2c_enable_irq(i2c);
+	s3c24xx_i2c_message_start(i2c, msgs);
+
+	if (i2c->quirks & QUIRK_POLL) {
+		ret = i2c->msg_idx;
+
+		if (ret != num)
+			dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+		goto out;
+	}
+
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+
+	ret = i2c->msg_idx;
+
+	/*
+	 * Having these next two as dev_err() makes life very
+	 * noisy when doing an i2cdetect
+	 */
+	if (timeout == 0)
+		dev_dbg(i2c->dev, "timeout\n");
+	else if (ret != num)
+		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+	/* For QUIRK_HDMIPHY, bus is already disabled */
+	if (i2c->quirks & QUIRK_HDMIPHY)
+		goto out;
+
+	s3c24xx_i2c_wait_idle(i2c);
+
+	s3c24xx_i2c_disable_bus(i2c);
+
+ out:
+	i2c->state = STATE_IDLE;
+
+	return ret;
+}
+
+/*
+ * first port of call from the i2c bus code when an message needs
+ * transferring across the i2c bus.
+ */
+static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
+	int retry;
+	int ret;
+
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
+
+	for (retry = 0; retry < adap->retries; retry++) {
+
+		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
+
+		if (ret != -EAGAIN) {
+			clk_disable(i2c->clk);
+			return ret;
+		}
+
+		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
+
+		udelay(100);
+	}
+
+	clk_disable(i2c->clk);
+	return -EREMOTEIO;
+}
+
+/* declare our i2c functionality */
+static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART |
+		I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* i2c bus registration info */
+static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
+	.master_xfer		= s3c24xx_i2c_xfer,
+	.functionality		= s3c24xx_i2c_func,
+};
+
+/*
+ * return the divisor settings for a given frequency
+ */
+static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
+				   unsigned int *div1, unsigned int *divs)
+{
+	unsigned int calc_divs = clkin / wanted;
+	unsigned int calc_div1;
+
+	if (calc_divs > (16*16))
+		calc_div1 = 512;
+	else
+		calc_div1 = 16;
+
+	calc_divs += calc_div1-1;
+	calc_divs /= calc_div1;
+
+	if (calc_divs == 0)
+		calc_divs = 1;
+	if (calc_divs > 17)
+		calc_divs = 17;
+
+	*divs = calc_divs;
+	*div1 = calc_div1;
+
+	return clkin / (calc_divs * calc_div1);
+}
+
+/*
+ * work out a divisor for the user requested frequency setting,
+ * either by the requested frequency, or scanning the acceptable
+ * range of frequencies until something is found
+ */
+static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
+{
+	struct s3c2410_platform_i2c *pdata = i2c->pdata;
+	unsigned long clkin = clk_get_rate(i2c->clk);
+	unsigned int divs, div1;
+	unsigned long target_frequency;
+	u32 iiccon;
+	int freq;
+
+	i2c->clkrate = clkin;
+	clkin /= 1000;		/* clkin now in KHz */
+
+	dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
+
+	target_frequency = pdata->frequency ? pdata->frequency : 100000;
+
+	target_frequency /= 1000; /* Target frequency now in KHz */
+
+	freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
+
+	if (freq > target_frequency) {
+		dev_err(i2c->dev,
+			"Unable to achieve desired frequency %luKHz."	\
+			" Lowest achievable %dKHz\n", target_frequency, freq);
+		return -EINVAL;
+	}
+
+	*got = freq;
+
+	iiccon = readl(i2c->regs + S3C2410_IICCON);
+	iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
+	iiccon |= (divs-1);
+
+	if (div1 == 512)
+		iiccon |= S3C2410_IICCON_TXDIV_512;
+
+	if (i2c->quirks & QUIRK_POLL)
+		iiccon |= S3C2410_IICCON_SCALE(2);
+
+	writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+	if (i2c->quirks & QUIRK_S3C2440) {
+		unsigned long sda_delay;
+
+		if (pdata->sda_delay) {
+			sda_delay = clkin * pdata->sda_delay;
+			sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
+			sda_delay = DIV_ROUND_UP(sda_delay, 5);
+			if (sda_delay > 3)
+				sda_delay = 3;
+			sda_delay |= S3C2410_IICLC_FILTER_ON;
+		} else
+			sda_delay = 0;
+
+		dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
+		writel(sda_delay, i2c->regs + S3C2440_IICLC);
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
+
+#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
+
+static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
+	unsigned int got;
+	int delta_f;
+	int ret;
+
+	delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
+
+	/* if we're post-change and the input clock has slowed down
+	 * or at pre-change and the clock is about to speed up, then
+	 * adjust our clock rate. <0 is slow, >0 speedup.
+	 */
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
+	    (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
+		i2c_lock_adapter(&i2c->adap);
+		ret = s3c24xx_i2c_clockrate(i2c, &got);
+		i2c_unlock_adapter(&i2c->adap);
+
+		if (ret < 0)
+			dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
+		else
+			dev_info(i2c->dev, "setting freq %d\n", got);
+	}
+
+	return 0;
+}
+
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+	i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
+
+	return cpufreq_register_notifier(&i2c->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+	cpufreq_unregister_notifier(&i2c->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+	return 0;
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
+#ifdef CONFIG_OF
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+	int idx, gpio, ret;
+
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return 0;
+
+	for (idx = 0; idx < 2; idx++) {
+		gpio = of_get_gpio(i2c->dev->of_node, idx);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
+			goto free_gpio;
+		}
+		i2c->gpios[idx] = gpio;
+
+		ret = gpio_request(gpio, "i2c-bus");
+		if (ret) {
+			dev_err(i2c->dev, "gpio [%d] request failed (%d)\n",
+				gpio, ret);
+			goto free_gpio;
+		}
+	}
+	return 0;
+
+free_gpio:
+	while (--idx >= 0)
+		gpio_free(i2c->gpios[idx]);
+	return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+	unsigned int idx;
+
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return;
+
+	for (idx = 0; idx < 2; idx++)
+		gpio_free(i2c->gpios[idx]);
+}
+#else
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+	return 0;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
+/*
+ * initialise the controller, set the IO lines and frequency
+ */
+static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
+{
+	struct s3c2410_platform_i2c *pdata;
+	unsigned int freq;
+
+	/* get the plafrom data */
+
+	pdata = i2c->pdata;
+
+	/* write slave address */
+
+	writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
+
+	dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
+
+	writel(0, i2c->regs + S3C2410_IICCON);
+	writel(0, i2c->regs + S3C2410_IICSTAT);
+
+	/* we need to work out the divisors for the clock... */
+
+	if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
+		dev_err(i2c->dev, "cannot meet bus frequency required\n");
+		return -EINVAL;
+	}
+
+	/* todo - check that the i2c lines aren't being dragged anywhere */
+
+	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
+	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02x\n",
+		readl(i2c->regs + S3C2410_IICCON));
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+/*
+ * Parse the device tree node and retreive the platform data.
+ */
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+	struct s3c2410_platform_i2c *pdata = i2c->pdata;
+	int id;
+
+	if (!np)
+		return;
+
+	pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
+	of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
+	of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
+	of_property_read_u32(np, "samsung,i2c-max-bus-freq",
+				(u32 *)&pdata->frequency);
+	/*
+	 * Exynos5's legacy i2c controller and new high speed i2c
+	 * controller have muxed interrupt sources. By default the
+	 * interrupts for 4-channel HS-I2C controller are enabled.
+	 * If nodes for first four channels of legacy i2c controller
+	 * are available then re-configure the interrupts via the
+	 * system register.
+	 */
+	id = of_alias_get_id(np, "i2c");
+	i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
+			"samsung,sysreg-phandle");
+	if (IS_ERR(i2c->sysreg))
+		return;
+
+	regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
+}
+#else
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { }
+#endif
+
+static int s3c24xx_i2c_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_i2c *i2c;
+	struct s3c2410_platform_i2c *pdata = NULL;
+	struct resource *res;
+	int ret;
+
+	if (!pdev->dev.of_node) {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (!pdata) {
+			dev_err(&pdev->dev, "no platform data\n");
+			return -EINVAL;
+		}
+	}
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!i2c->pdata)
+		return -ENOMEM;
+
+	i2c->quirks = s3c24xx_get_device_quirks(pdev);
+	i2c->sysreg = ERR_PTR(-ENOENT);
+	if (pdata)
+		memcpy(i2c->pdata, pdata, sizeof(*pdata));
+	else
+		s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
+
+	strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
+	i2c->adap.owner = THIS_MODULE;
+	i2c->adap.algo = &s3c24xx_i2c_algorithm;
+	i2c->adap.retries = 2;
+	i2c->adap.class = I2C_CLASS_DEPRECATED;
+	i2c->tx_setup = 50;
+
+	init_waitqueue_head(&i2c->wait);
+
+	/* find the clock and enable it */
+	i2c->dev = &pdev->dev;
+	i2c->clk = devm_clk_get(&pdev->dev, "i2c");
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return -ENOENT;
+	}
+
+	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
+
+	/* map the registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, res);
+
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
+
+	dev_dbg(&pdev->dev, "registers %p (%p)\n",
+		i2c->regs, res);
+
+	/* setup info block for the i2c core */
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
+
+	/* inititalise the i2c gpio lines */
+	if (i2c->pdata->cfg_gpio)
+		i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
+	else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
+		return -EINVAL;
+
+	/* initialise the i2c controller */
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "I2C clock enable failed\n");
+		return ret;
+	}
+
+	ret = s3c24xx_i2c_init(i2c);
+	clk_disable(i2c->clk);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "I2C controller init failed\n");
+		clk_unprepare(i2c->clk);
+		return ret;
+	}
+
+	/*
+	 * find the IRQ for this unit (note, this relies on the init call to
+	 * ensure no current IRQs pending
+	 */
+	if (!(i2c->quirks & QUIRK_POLL)) {
+		i2c->irq = ret = platform_get_irq(pdev, 0);
+		if (ret <= 0) {
+			dev_err(&pdev->dev, "cannot find IRQ\n");
+			clk_unprepare(i2c->clk);
+			return ret;
+		}
+
+		ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq,
+				       0, dev_name(&pdev->dev), i2c);
+		if (ret != 0) {
+			dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+			clk_unprepare(i2c->clk);
+			return ret;
+		}
+	}
+
+	ret = s3c24xx_i2c_register_cpufreq(i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
+		clk_unprepare(i2c->clk);
+		return ret;
+	}
+
+	/*
+	 * Note, previous versions of the driver used i2c_add_adapter()
+	 * to add the bus at any number. We now pass the bus number via
+	 * the platform data, so if unset it will now default to always
+	 * being bus 0.
+	 */
+	i2c->adap.nr = i2c->pdata->bus_num;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	platform_set_drvdata(pdev, i2c);
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret < 0) {
+		pm_runtime_disable(&pdev->dev);
+		s3c24xx_i2c_deregister_cpufreq(i2c);
+		clk_unprepare(i2c->clk);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
+	return 0;
+}
+
+static int s3c24xx_i2c_remove(struct platform_device *pdev)
+{
+	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_unprepare(i2c->clk);
+
+	pm_runtime_disable(&pdev->dev);
+
+	s3c24xx_i2c_deregister_cpufreq(i2c);
+
+	i2c_del_adapter(&i2c->adap);
+
+	if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
+		s3c24xx_i2c_dt_gpio_free(i2c);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_i2c_suspend_noirq(struct device *dev)
+{
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->suspended = 1;
+
+	if (!IS_ERR(i2c->sysreg))
+		regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
+
+	return 0;
+}
+
+static int s3c24xx_i2c_resume_noirq(struct device *dev)
+{
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
+
+	if (!IS_ERR(i2c->sysreg))
+		regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg);
+
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
+	s3c24xx_i2c_init(i2c);
+	clk_disable(i2c->clk);
+	i2c->suspended = 0;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(s3c24xx_i2c_suspend_noirq,
+				      s3c24xx_i2c_resume_noirq)
+};
+
+#define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
+#else
+#define S3C24XX_DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver s3c24xx_i2c_driver = {
+	.probe		= s3c24xx_i2c_probe,
+	.remove		= s3c24xx_i2c_remove,
+	.id_table	= s3c24xx_driver_ids,
+	.driver		= {
+		.name	= "s3c-i2c",
+		.pm	= S3C24XX_DEV_PM_OPS,
+		.of_match_table = of_match_ptr(s3c24xx_i2c_match),
+	},
+};
+
+static int __init i2c_adap_s3c_init(void)
+{
+	return platform_driver_register(&s3c24xx_i2c_driver);
+}
+subsys_initcall(i2c_adap_s3c_init);
+
+static void __exit i2c_adap_s3c_exit(void)
+{
+	platform_driver_unregister(&s3c24xx_i2c_driver);
+}
+module_exit(i2c_adap_s3c_exit);
+
+MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-scmi.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-scmi.c
new file mode 100644
index 0000000..d2178f7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-scmi.c
@@ -0,0 +1,441 @@
+/*
+ * SMBus driver for ACPI SMBus CMI
+ *
+ * Copyright (C) 2009 Crane Cai <crane.cai@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+
+#define ACPI_SMBUS_HC_CLASS		"smbus"
+#define ACPI_SMBUS_HC_DEVICE_NAME	"cmi"
+
+/* SMBUS HID definition as supported by Microsoft Windows */
+#define ACPI_SMBUS_MS_HID		"SMB0001"
+
+ACPI_MODULE_NAME("smbus_cmi");
+
+struct smbus_methods_t {
+	char *mt_info;
+	char *mt_sbr;
+	char *mt_sbw;
+};
+
+struct acpi_smbus_cmi {
+	acpi_handle handle;
+	struct i2c_adapter adapter;
+	u8 cap_info:1;
+	u8 cap_read:1;
+	u8 cap_write:1;
+	struct smbus_methods_t *methods;
+};
+
+static const struct smbus_methods_t smbus_methods = {
+	.mt_info = "_SBI",
+	.mt_sbr  = "_SBR",
+	.mt_sbw  = "_SBW",
+};
+
+/* Some IBM BIOSes omit the leading underscore */
+static const struct smbus_methods_t ibm_smbus_methods = {
+	.mt_info = "SBI_",
+	.mt_sbr  = "SBR_",
+	.mt_sbw  = "SBW_",
+};
+
+static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
+	{"SMBUS01", (kernel_ulong_t)&smbus_methods},
+	{ACPI_SMBUS_IBM_HID, (kernel_ulong_t)&ibm_smbus_methods},
+	{ACPI_SMBUS_MS_HID, (kernel_ulong_t)&smbus_methods},
+	{"", 0}
+};
+MODULE_DEVICE_TABLE(acpi, acpi_smbus_cmi_ids);
+
+#define ACPI_SMBUS_STATUS_OK			0x00
+#define ACPI_SMBUS_STATUS_FAIL			0x07
+#define ACPI_SMBUS_STATUS_DNAK			0x10
+#define ACPI_SMBUS_STATUS_DERR			0x11
+#define ACPI_SMBUS_STATUS_CMD_DENY		0x12
+#define ACPI_SMBUS_STATUS_UNKNOWN		0x13
+#define ACPI_SMBUS_STATUS_ACC_DENY		0x17
+#define ACPI_SMBUS_STATUS_TIMEOUT		0x18
+#define ACPI_SMBUS_STATUS_NOTSUP		0x19
+#define ACPI_SMBUS_STATUS_BUSY			0x1a
+#define ACPI_SMBUS_STATUS_PEC			0x1f
+
+#define ACPI_SMBUS_PRTCL_WRITE			0x00
+#define ACPI_SMBUS_PRTCL_READ			0x01
+#define ACPI_SMBUS_PRTCL_QUICK			0x02
+#define ACPI_SMBUS_PRTCL_BYTE			0x04
+#define ACPI_SMBUS_PRTCL_BYTE_DATA		0x06
+#define ACPI_SMBUS_PRTCL_WORD_DATA		0x08
+#define ACPI_SMBUS_PRTCL_BLOCK_DATA		0x0a
+
+
+static int
+acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int size,
+		   union i2c_smbus_data *data)
+{
+	int result = 0;
+	struct acpi_smbus_cmi *smbus_cmi = adap->algo_data;
+	unsigned char protocol;
+	acpi_status status = 0;
+	struct acpi_object_list input;
+	union acpi_object mt_params[5];
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	union acpi_object *pkg;
+	char *method;
+	int len = 0;
+
+	dev_dbg(&adap->dev, "access size: %d %s\n", size,
+		(read_write) ? "READ" : "WRITE");
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		protocol = ACPI_SMBUS_PRTCL_QUICK;
+		command = 0;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 0;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = 0;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE:
+		protocol = ACPI_SMBUS_PRTCL_BYTE;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 0;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = 0;
+		} else {
+			command = 0;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		protocol = ACPI_SMBUS_PRTCL_BYTE_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 1;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = data->byte;
+		}
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		protocol = ACPI_SMBUS_PRTCL_WORD_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 2;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = data->word;
+		}
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		protocol = ACPI_SMBUS_PRTCL_BLOCK_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = len;
+			mt_params[4].type = ACPI_TYPE_BUFFER;
+			mt_params[4].buffer.length = len;
+			mt_params[4].buffer.pointer = data->block + 1;
+		}
+		break;
+
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	if (read_write == I2C_SMBUS_READ) {
+		protocol |= ACPI_SMBUS_PRTCL_READ;
+		method = smbus_cmi->methods->mt_sbr;
+		input.count = 3;
+	} else {
+		protocol |= ACPI_SMBUS_PRTCL_WRITE;
+		method = smbus_cmi->methods->mt_sbw;
+		input.count = 5;
+	}
+
+	input.pointer = mt_params;
+	mt_params[0].type = ACPI_TYPE_INTEGER;
+	mt_params[0].integer.value = protocol;
+	mt_params[1].type = ACPI_TYPE_INTEGER;
+	mt_params[1].integer.value = addr;
+	mt_params[2].type = ACPI_TYPE_INTEGER;
+	mt_params[2].integer.value = command;
+
+	status = acpi_evaluate_object(smbus_cmi->handle, method, &input,
+				      &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR((AE_INFO, "Evaluating %s: %i", method, status));
+		return -EIO;
+	}
+
+	pkg = buffer.pointer;
+	if (pkg && pkg->type == ACPI_TYPE_PACKAGE)
+		obj = pkg->package.elements;
+	else {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+	if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+
+	result = obj->integer.value;
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s return status: %i\n",
+			  method, result));
+
+	switch (result) {
+	case ACPI_SMBUS_STATUS_OK:
+		result = 0;
+		break;
+	case ACPI_SMBUS_STATUS_BUSY:
+		result = -EBUSY;
+		goto out;
+	case ACPI_SMBUS_STATUS_TIMEOUT:
+		result = -ETIMEDOUT;
+		goto out;
+	case ACPI_SMBUS_STATUS_DNAK:
+		result = -ENXIO;
+		goto out;
+	default:
+		result = -EIO;
+		goto out;
+	}
+
+	if (read_write == I2C_SMBUS_WRITE || size == I2C_SMBUS_QUICK)
+		goto out;
+
+	obj = pkg->package.elements + 1;
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+
+	len = obj->integer.value;
+	obj = pkg->package.elements + 2;
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+	case I2C_SMBUS_WORD_DATA:
+		if (obj->type != ACPI_TYPE_INTEGER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			result = -EIO;
+			goto out;
+		}
+		if (len == 2)
+			data->word = obj->integer.value;
+		else
+			data->byte = obj->integer.value;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (obj->type != ACPI_TYPE_BUFFER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			result = -EIO;
+			goto out;
+		}
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		data->block[0] = len;
+		memcpy(data->block + 1, obj->buffer.pointer, len);
+		break;
+	}
+
+out:
+	kfree(buffer.pointer);
+	dev_dbg(&adap->dev, "Transaction status: %i\n", result);
+	return result;
+}
+
+static u32 acpi_smbus_cmi_func(struct i2c_adapter *adapter)
+{
+	struct acpi_smbus_cmi *smbus_cmi = adapter->algo_data;
+	u32 ret;
+
+	ret = smbus_cmi->cap_read | smbus_cmi->cap_write ?
+		I2C_FUNC_SMBUS_QUICK : 0;
+
+	ret |= smbus_cmi->cap_read ?
+		(I2C_FUNC_SMBUS_READ_BYTE |
+		I2C_FUNC_SMBUS_READ_BYTE_DATA |
+		I2C_FUNC_SMBUS_READ_WORD_DATA |
+		I2C_FUNC_SMBUS_READ_BLOCK_DATA) : 0;
+
+	ret |= smbus_cmi->cap_write ?
+		(I2C_FUNC_SMBUS_WRITE_BYTE |
+		I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+		I2C_FUNC_SMBUS_WRITE_WORD_DATA |
+		I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) : 0;
+
+	return ret;
+}
+
+static const struct i2c_algorithm acpi_smbus_cmi_algorithm = {
+	.smbus_xfer = acpi_smbus_cmi_access,
+	.functionality = acpi_smbus_cmi_func,
+};
+
+
+static int acpi_smbus_cmi_add_cap(struct acpi_smbus_cmi *smbus_cmi,
+				  const char *name)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+
+	if (!strcmp(name, smbus_cmi->methods->mt_info)) {
+		status = acpi_evaluate_object(smbus_cmi->handle,
+					smbus_cmi->methods->mt_info,
+					NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR((AE_INFO, "Evaluating %s: %i",
+				   smbus_cmi->methods->mt_info, status));
+			return -EIO;
+		}
+
+		obj = buffer.pointer;
+		if (obj && obj->type == ACPI_TYPE_PACKAGE)
+			obj = obj->package.elements;
+		else {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			kfree(buffer.pointer);
+			return -EIO;
+		}
+
+		if (obj->type != ACPI_TYPE_INTEGER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			kfree(buffer.pointer);
+			return -EIO;
+		} else
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO, "SMBus CMI Version %x"
+					  "\n", (int)obj->integer.value));
+
+		kfree(buffer.pointer);
+		smbus_cmi->cap_info = 1;
+	} else if (!strcmp(name, smbus_cmi->methods->mt_sbr))
+		smbus_cmi->cap_read = 1;
+	else if (!strcmp(name, smbus_cmi->methods->mt_sbw))
+		smbus_cmi->cap_write = 1;
+	else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported CMI method: %s\n",
+				 name));
+
+	return 0;
+}
+
+static acpi_status acpi_smbus_cmi_query_methods(acpi_handle handle, u32 level,
+			void *context, void **return_value)
+{
+	char node_name[5];
+	struct acpi_buffer buffer = { sizeof(node_name), node_name };
+	struct acpi_smbus_cmi *smbus_cmi = context;
+	acpi_status status;
+
+	status = acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+
+	if (ACPI_SUCCESS(status))
+		acpi_smbus_cmi_add_cap(smbus_cmi, node_name);
+
+	return AE_OK;
+}
+
+static int acpi_smbus_cmi_add(struct acpi_device *device)
+{
+	struct acpi_smbus_cmi *smbus_cmi;
+	const struct acpi_device_id *id;
+	int ret;
+
+	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
+	if (!smbus_cmi)
+		return -ENOMEM;
+
+	smbus_cmi->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_SMBUS_HC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_SMBUS_HC_CLASS);
+	device->driver_data = smbus_cmi;
+	smbus_cmi->cap_info = 0;
+	smbus_cmi->cap_read = 0;
+	smbus_cmi->cap_write = 0;
+
+	for (id = acpi_smbus_cmi_ids; id->id[0]; id++)
+		if (!strcmp(id->id, acpi_device_hid(device)))
+			smbus_cmi->methods =
+				(struct smbus_methods_t *) id->driver_data;
+
+	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
+			    acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
+
+	if (smbus_cmi->cap_info == 0) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
+		"SMBus CMI adapter %s",
+		acpi_device_name(device));
+	smbus_cmi->adapter.owner = THIS_MODULE;
+	smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
+	smbus_cmi->adapter.algo_data = smbus_cmi;
+	smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	smbus_cmi->adapter.dev.parent = &device->dev;
+
+	ret = i2c_add_adapter(&smbus_cmi->adapter);
+	if (ret) {
+		dev_err(&device->dev, "Couldn't register adapter!\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	kfree(smbus_cmi);
+	device->driver_data = NULL;
+	return ret;
+}
+
+static int acpi_smbus_cmi_remove(struct acpi_device *device)
+{
+	struct acpi_smbus_cmi *smbus_cmi = acpi_driver_data(device);
+
+	i2c_del_adapter(&smbus_cmi->adapter);
+	kfree(smbus_cmi);
+	device->driver_data = NULL;
+
+	return 0;
+}
+
+static struct acpi_driver acpi_smbus_cmi_driver = {
+	.name = ACPI_SMBUS_HC_DEVICE_NAME,
+	.class = ACPI_SMBUS_HC_CLASS,
+	.ids = acpi_smbus_cmi_ids,
+	.ops = {
+		.add = acpi_smbus_cmi_add,
+		.remove = acpi_smbus_cmi_remove,
+	},
+};
+module_acpi_driver(acpi_smbus_cmi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Crane Cai <crane.cai@amd.com>");
+MODULE_DESCRIPTION("ACPI SMBus CMI driver");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh7760.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh7760.c
new file mode 100644
index 0000000..c2005c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh7760.c
@@ -0,0 +1,562 @@
+/*
+ * I2C bus driver for the SH7760 I2C Interfaces.
+ *
+ * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ *
+ * licensed under the terms outlined in the file COPYING.
+ *
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/clock.h>
+#include <asm/i2c-sh7760.h>
+
+/* register offsets */
+#define I2CSCR		0x0		/* slave ctrl		*/
+#define I2CMCR		0x4		/* master ctrl		*/
+#define I2CSSR		0x8		/* slave status		*/
+#define I2CMSR		0xC		/* master status	*/
+#define I2CSIER		0x10		/* slave irq enable	*/
+#define I2CMIER		0x14		/* master irq enable	*/
+#define I2CCCR		0x18		/* clock dividers	*/
+#define I2CSAR		0x1c		/* slave address	*/
+#define I2CMAR		0x20		/* master address	*/
+#define I2CRXTX		0x24		/* data port		*/
+#define I2CFCR		0x28		/* fifo control		*/
+#define I2CFSR		0x2C		/* fifo status		*/
+#define I2CFIER		0x30		/* fifo irq enable	*/
+#define I2CRFDR		0x34		/* rx fifo count	*/
+#define I2CTFDR		0x38		/* tx fifo count	*/
+
+#define REGSIZE		0x3C
+
+#define MCR_MDBS	0x80		/* non-fifo mode switch	*/
+#define MCR_FSCL	0x40		/* override SCL pin	*/
+#define MCR_FSDA	0x20		/* override SDA pin	*/
+#define MCR_OBPC	0x10		/* override pins	*/
+#define MCR_MIE		0x08		/* master if enable	*/
+#define MCR_TSBE	0x04
+#define MCR_FSB		0x02		/* force stop bit	*/
+#define MCR_ESG		0x01		/* en startbit gen.	*/
+
+#define MSR_MNR		0x40		/* nack received	*/
+#define MSR_MAL		0x20		/* arbitration lost	*/
+#define MSR_MST		0x10		/* sent a stop		*/
+#define MSR_MDE		0x08
+#define MSR_MDT		0x04
+#define MSR_MDR		0x02
+#define MSR_MAT		0x01		/* slave addr xfer done	*/
+
+#define MIE_MNRE	0x40		/* nack irq en		*/
+#define MIE_MALE	0x20		/* arblos irq en	*/
+#define MIE_MSTE	0x10		/* stop irq en		*/
+#define MIE_MDEE	0x08
+#define MIE_MDTE	0x04
+#define MIE_MDRE	0x02
+#define MIE_MATE	0x01		/* address sent irq en	*/
+
+#define FCR_RFRST	0x02		/* reset rx fifo	*/
+#define FCR_TFRST	0x01		/* reset tx fifo	*/
+
+#define FSR_TEND	0x04		/* last byte sent	*/
+#define FSR_RDF		0x02		/* rx fifo trigger	*/
+#define FSR_TDFE	0x01		/* tx fifo empty	*/
+
+#define FIER_TEIE	0x04		/* tx fifo empty irq en	*/
+#define FIER_RXIE	0x02		/* rx fifo trig irq en	*/
+#define FIER_TXIE	0x01		/* tx fifo trig irq en	*/
+
+#define FIFO_SIZE	16
+
+struct cami2c {
+	void __iomem *iobase;
+	struct i2c_adapter adap;
+
+	/* message processing */
+	struct i2c_msg	*msg;
+#define IDF_SEND	1
+#define IDF_RECV	2
+#define IDF_STOP	4
+	int		flags;
+
+#define IDS_DONE	1
+#define IDS_ARBLOST	2
+#define IDS_NACK	4
+	int		status;
+	struct completion xfer_done;
+
+	int irq;
+	struct resource *ioarea;
+};
+
+static inline void OUT32(struct cami2c *cam, int reg, unsigned long val)
+{
+	__raw_writel(val, (unsigned long)cam->iobase + reg);
+}
+
+static inline unsigned long IN32(struct cami2c *cam, int reg)
+{
+	return __raw_readl((unsigned long)cam->iobase + reg);
+}
+
+static irqreturn_t sh7760_i2c_irq(int irq, void *ptr)
+{
+	struct cami2c *id = ptr;
+	struct i2c_msg *msg = id->msg;
+	char *data = msg->buf;
+	unsigned long msr, fsr, fier, len;
+
+	msr = IN32(id, I2CMSR);
+	fsr = IN32(id, I2CFSR);
+
+	/* arbitration lost */
+	if (msr & MSR_MAL) {
+		OUT32(id, I2CMCR, 0);
+		OUT32(id, I2CSCR, 0);
+		OUT32(id, I2CSAR, 0);
+		id->status |= IDS_DONE | IDS_ARBLOST;
+		goto out;
+	}
+
+	if (msr & MSR_MNR) {
+		/* NACK handling is very screwed up.  After receiving a
+		 * NAK IRQ one has to wait a bit  before writing to any
+		 * registers, or the ctl will lock up. After that delay
+		 * do a normal i2c stop. Then wait at least 1 ms before
+		 * attempting another transfer or ctl will stop working
+		 */
+		udelay(100);	/* wait or risk ctl hang */
+		OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+		OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+		OUT32(id, I2CFIER, 0);
+		OUT32(id, I2CMIER, MIE_MSTE);
+		OUT32(id, I2CSCR, 0);
+		OUT32(id, I2CSAR, 0);
+		id->status |= IDS_NACK;
+		msr &= ~MSR_MAT;
+		fsr = 0;
+		/* In some cases the MST bit is also set. */
+	}
+
+	/* i2c-stop was sent */
+	if (msr & MSR_MST) {
+		id->status |= IDS_DONE;
+		goto out;
+	}
+
+	/* i2c slave addr was sent; set to "normal" operation */
+	if (msr & MSR_MAT)
+		OUT32(id, I2CMCR, MCR_MIE);
+
+	fier = IN32(id, I2CFIER);
+
+	if (fsr & FSR_RDF) {
+		len = IN32(id, I2CRFDR);
+		if (msg->len <= len) {
+			if (id->flags & IDF_STOP) {
+				OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+				OUT32(id, I2CFIER, 0);
+				/* manual says: wait >= 0.5 SCL times */
+				udelay(5);
+				/* next int should be MST */
+			} else {
+				id->status |= IDS_DONE;
+				/* keep the RDF bit: ctrl holds SCL low
+				 * until the setup for the next i2c_msg
+				 * clears this bit.
+				 */
+				fsr &= ~FSR_RDF;
+			}
+		}
+		while (msg->len && len) {
+			*data++ = IN32(id, I2CRXTX);
+			msg->len--;
+			len--;
+		}
+
+		if (msg->len) {
+			len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1
+						      : msg->len - 1;
+
+			OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4));
+		}
+
+	} else if (id->flags & IDF_SEND) {
+		if ((fsr & FSR_TEND) && (msg->len < 1)) {
+			if (id->flags & IDF_STOP) {
+				OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+			} else {
+				id->status |= IDS_DONE;
+				/* keep the TEND bit: ctl holds SCL low
+				 * until the setup for the next i2c_msg
+				 * clears this bit.
+				 */
+				fsr &= ~FSR_TEND;
+			}
+		}
+		if (fsr & FSR_TDFE) {
+			while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) {
+				OUT32(id, I2CRXTX, *data++);
+				msg->len--;
+			}
+
+			if (msg->len < 1) {
+				fier &= ~FIER_TXIE;
+				OUT32(id, I2CFIER, fier);
+			} else {
+				len = (msg->len >= FIFO_SIZE) ? 2 : 0;
+				OUT32(id, I2CFCR,
+					  FCR_RFRST | ((len & 3) << 2));
+			}
+		}
+	}
+out:
+	if (id->status & IDS_DONE) {
+		OUT32(id, I2CMIER, 0);
+		OUT32(id, I2CFIER, 0);
+		id->msg = NULL;
+		complete(&id->xfer_done);
+	}
+	/* clear status flags and ctrl resumes work */
+	OUT32(id, I2CMSR, ~msr);
+	OUT32(id, I2CFSR, ~fsr);
+	OUT32(id, I2CSSR, 0);
+
+	return IRQ_HANDLED;
+}
+
+
+/* prepare and start a master receive operation */
+static void sh7760_i2c_mrecv(struct cami2c *id)
+{
+	int len;
+
+	id->flags |= IDF_RECV;
+
+	/* set the slave addr reg; otherwise rcv wont work! */
+	OUT32(id, I2CSAR, 0xfe);
+	OUT32(id, I2CMAR, (id->msg->addr << 1) | 1);
+
+	/* adjust rx fifo trigger */
+	if (id->msg->len >= FIFO_SIZE)
+		len = FIFO_SIZE - 1;	/* trigger at fifo full */
+	else
+		len = id->msg->len - 1;	/* trigger before all received */
+
+	OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+	OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4));
+
+	OUT32(id, I2CMSR, 0);
+	OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
+	OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
+	OUT32(id, I2CFIER, FIER_RXIE);
+}
+
+/* prepare and start a master send operation */
+static void sh7760_i2c_msend(struct cami2c *id)
+{
+	int len;
+
+	id->flags |= IDF_SEND;
+
+	/* set the slave addr reg; otherwise xmit wont work! */
+	OUT32(id, I2CSAR, 0xfe);
+	OUT32(id, I2CMAR, (id->msg->addr << 1) | 0);
+
+	/* adjust tx fifo trigger */
+	if (id->msg->len >= FIFO_SIZE)
+		len = 2;	/* trig: 2 bytes left in TX fifo */
+	else
+		len = 0;	/* trig: 8 bytes left in TX fifo */
+
+	OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+	OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2));
+
+	while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) {
+		OUT32(id, I2CRXTX, *(id->msg->buf));
+		(id->msg->len)--;
+		(id->msg->buf)++;
+	}
+
+	OUT32(id, I2CMSR, 0);
+	OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
+	OUT32(id, I2CFSR, 0);
+	OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
+	OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0));
+}
+
+static inline int sh7760_i2c_busy_check(struct cami2c *id)
+{
+	return (IN32(id, I2CMCR) & MCR_FSDA);
+}
+
+static int sh7760_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs,
+				  int num)
+{
+	struct cami2c *id = adap->algo_data;
+	int i, retr;
+
+	if (sh7760_i2c_busy_check(id)) {
+		dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr);
+		return -EBUSY;
+	}
+
+	i = 0;
+	while (i < num) {
+		retr = adap->retries;
+retry:
+		id->flags = ((i == (num-1)) ? IDF_STOP : 0);
+		id->status = 0;
+		id->msg = msgs;
+		init_completion(&id->xfer_done);
+
+		if (msgs->flags & I2C_M_RD)
+			sh7760_i2c_mrecv(id);
+		else
+			sh7760_i2c_msend(id);
+
+		wait_for_completion(&id->xfer_done);
+
+		if (id->status == 0) {
+			num = -EIO;
+			break;
+		}
+
+		if (id->status & IDS_NACK) {
+			/* wait a bit or i2c module stops working */
+			mdelay(1);
+			num = -EREMOTEIO;
+			break;
+		}
+
+		if (id->status & IDS_ARBLOST) {
+			if (retr--) {
+				mdelay(2);
+				goto retry;
+			}
+			num = -EREMOTEIO;
+			break;
+		}
+
+		msgs++;
+		i++;
+	}
+
+	id->msg = NULL;
+	id->flags = 0;
+	id->status = 0;
+
+	OUT32(id, I2CMCR, 0);
+	OUT32(id, I2CMSR, 0);
+	OUT32(id, I2CMIER, 0);
+	OUT32(id, I2CFIER, 0);
+
+	/* reset slave module registers too: master mode enables slave
+	 * module for receive ops (ack, data). Without this reset,
+	 * eternal bus activity might be reported after NACK / ARBLOST.
+	 */
+	OUT32(id, I2CSCR, 0);
+	OUT32(id, I2CSAR, 0);
+	OUT32(id, I2CSSR, 0);
+
+	return num;
+}
+
+static u32 sh7760_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm sh7760_i2c_algo = {
+	.master_xfer	= sh7760_i2c_master_xfer,
+	.functionality	= sh7760_i2c_func,
+};
+
+/* calculate CCR register setting for a desired scl clock.  SCL clock is
+ * derived from I2C module clock  (iclk)  which in turn is derived from
+ * peripheral module clock (mclk, usually around 33MHz):
+ * iclk = mclk/(CDF + 1).  iclk must be < 20MHz.
+ * scl = iclk/(SCGD*8 + 20).
+ */
+static int calc_CCR(unsigned long scl_hz)
+{
+	struct clk *mclk;
+	unsigned long mck, m1, dff, odff, iclk;
+	signed char cdf, cdfm;
+	int scgd, scgdm, scgds;
+
+	mclk = clk_get(NULL, "peripheral_clk");
+	if (IS_ERR(mclk)) {
+		return PTR_ERR(mclk);
+	} else {
+		mck = mclk->rate;
+		clk_put(mclk);
+	}
+
+	odff = scl_hz;
+	scgdm = cdfm = m1 = 0;
+	for (cdf = 3; cdf >= 0; cdf--) {
+		iclk = mck / (1 + cdf);
+		if (iclk >= 20000000)
+			continue;
+		scgds = ((iclk / scl_hz) - 20) >> 3;
+		for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) {
+			m1 = iclk / (20 + (scgd << 3));
+			dff = abs(scl_hz - m1);
+			if (dff < odff) {
+				odff = dff;
+				cdfm = cdf;
+				scgdm = scgd;
+			}
+		}
+	}
+	/* fail if more than 25% off of requested SCL */
+	if (odff > (scl_hz >> 2))
+		return -EINVAL;
+
+	/* create a CCR register value */
+	return ((scgdm << 2) | cdfm);
+}
+
+static int sh7760_i2c_probe(struct platform_device *pdev)
+{
+	struct sh7760_i2c_platdata *pd;
+	struct resource *res;
+	struct cami2c *id;
+	int ret;
+
+	pd = dev_get_platdata(&pdev->dev);
+	if (!pd) {
+		dev_err(&pdev->dev, "no platform_data!\n");
+		ret = -ENODEV;
+		goto out0;
+	}
+
+	id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
+	if (!id) {
+		dev_err(&pdev->dev, "no mem for private data\n");
+		ret = -ENOMEM;
+		goto out0;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no mmio resources\n");
+		ret = -ENODEV;
+		goto out1;
+	}
+
+	id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name);
+	if (!id->ioarea) {
+		dev_err(&pdev->dev, "mmio already reserved\n");
+		ret = -EBUSY;
+		goto out1;
+	}
+
+	id->iobase = ioremap(res->start, REGSIZE);
+	if (!id->iobase) {
+		dev_err(&pdev->dev, "cannot ioremap\n");
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	id->irq = platform_get_irq(pdev, 0);
+
+	id->adap.nr = pdev->id;
+	id->adap.algo = &sh7760_i2c_algo;
+	id->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	id->adap.retries = 3;
+	id->adap.algo_data = id;
+	id->adap.dev.parent = &pdev->dev;
+	snprintf(id->adap.name, sizeof(id->adap.name),
+		"SH7760 I2C at %08lx", (unsigned long)res->start);
+
+	OUT32(id, I2CMCR, 0);
+	OUT32(id, I2CMSR, 0);
+	OUT32(id, I2CMIER, 0);
+	OUT32(id, I2CMAR, 0);
+	OUT32(id, I2CSIER, 0);
+	OUT32(id, I2CSAR, 0);
+	OUT32(id, I2CSCR, 0);
+	OUT32(id, I2CSSR, 0);
+	OUT32(id, I2CFIER, 0);
+	OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+	OUT32(id, I2CFSR, 0);
+
+	ret = calc_CCR(pd->speed_khz * 1000);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n",
+			pd->speed_khz);
+		goto out3;
+	}
+	OUT32(id, I2CCCR, ret);
+
+	if (request_irq(id->irq, sh7760_i2c_irq, 0,
+			SH7760_I2C_DEVNAME, id)) {
+		dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
+		ret = -EBUSY;
+		goto out3;
+	}
+
+	ret = i2c_add_numbered_adapter(&id->adap);
+	if (ret < 0)
+		goto out4;
+
+	platform_set_drvdata(pdev, id);
+
+	dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n",
+		 pd->speed_khz, res->start, id->irq);
+
+	return 0;
+
+out4:
+	free_irq(id->irq, id);
+out3:
+	iounmap(id->iobase);
+out2:
+	release_resource(id->ioarea);
+	kfree(id->ioarea);
+out1:
+	kfree(id);
+out0:
+	return ret;
+}
+
+static int sh7760_i2c_remove(struct platform_device *pdev)
+{
+	struct cami2c *id = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&id->adap);
+	free_irq(id->irq, id);
+	iounmap(id->iobase);
+	release_resource(id->ioarea);
+	kfree(id->ioarea);
+	kfree(id);
+
+	return 0;
+}
+
+static struct platform_driver sh7760_i2c_drv = {
+	.driver	= {
+		.name	= SH7760_I2C_DEVNAME,
+	},
+	.probe		= sh7760_i2c_probe,
+	.remove		= sh7760_i2c_remove,
+};
+
+module_platform_driver(sh7760_i2c_drv);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SH7760 I2C bus driver");
+MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh_mobile.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh_mobile.c
new file mode 100644
index 0000000..338344e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sh_mobile.c
@@ -0,0 +1,1034 @@
+/*
+ * SuperH Mobile I2C Controller
+ *
+ * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Portions of the code based on out-of-tree driver i2c-sh7343.c
+ * Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+/* Transmit operation:                                                      */
+/*                                                                          */
+/* 0 byte transmit                                                          */
+/* BUS:     S     A8     ACK   P(*)                                         */
+/* IRQ:       DTE   WAIT                                                    */
+/* ICIC:                                                                    */
+/* ICCR: 0x94 0x90                                                          */
+/* ICDR:      A8                                                            */
+/*                                                                          */
+/* 1 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   P(*)                           */
+/* IRQ:       DTE   WAIT         WAIT                                       */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94       0x90                                                    */
+/* ICDR:      A8    D8(1)                                                   */
+/*                                                                          */
+/* 2 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P(*)             */
+/* IRQ:       DTE   WAIT         WAIT          WAIT                         */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94                    0x90                                       */
+/* ICDR:      A8    D8(1)        D8(2)                                      */
+/*                                                                          */
+/* 3 bytes or more, +---------+ gets repeated                               */
+/*                                                                          */
+/*                                                                          */
+/* Receive operation:                                                       */
+/*                                                                          */
+/* 0 byte receive - not supported since slave may hold SDA low              */
+/*                                                                          */
+/* 1 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   P(*)                           */
+/* IRQ:       DTE   WAIT     |   WAIT     DTE                               */
+/* ICIC:      -DTE           |   +DTE                                       */
+/* ICCR: 0x94       0x81     |   0xc0                                       */
+/* ICDR:      A8             |            D8(1)                             */
+/*                                                                          */
+/* 2 byte receive        [TX]| [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   P(*)             */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT     DTE                 */
+/* ICIC:      -DTE           |                 +DTE                         */
+/* ICCR: 0x94       0x81     |                 0xc0                         */
+/* ICDR:      A8             |                 D8(1)    D8(2)               */
+/*                                                                          */
+/* 3 byte receive       [TX] | [RX]                                     (*) */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   D8(3)   ACK    P */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT         WAIT      DTE   */
+/* ICIC:      -DTE           |                              +DTE            */
+/* ICCR: 0x94       0x81     |                              0xc0            */
+/* ICDR:      A8             |                 D8(1)        D8(2)     D8(3) */
+/*                                                                          */
+/* 4 bytes or more, this part is repeated    +---------+                    */
+/*                                                                          */
+/*                                                                          */
+/* Interrupt order and BUSY flag                                            */
+/*     ___                                                 _                */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/                 */
+/* SCL      \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/                   */
+/*                                                                          */
+/*        S   D7  D6  D5  D4  D3  D2  D1  D0              P(*)              */
+/*                                           ___                            */
+/* WAIT IRQ ________________________________/   \___________                */
+/* TACK IRQ ____________________________________/   \_______                */
+/* DTE  IRQ __________________________________________/   \_                */
+/* AL   IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX                */
+/*         _______________________________________________                  */
+/* BUSY __/                                               \_                */
+/*                                                                          */
+/* (*) The STOP condition is only sent by the master at the end of the last */
+/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
+/* only cleared after the STOP condition, so, between messages we have to   */
+/* poll for the DTE bit.                                                    */
+/*                                                                          */
+
+enum sh_mobile_i2c_op {
+	OP_START = 0,
+	OP_TX_FIRST,
+	OP_TX,
+	OP_TX_STOP,
+	OP_TX_STOP_DATA,
+	OP_TX_TO_RX,
+	OP_RX,
+	OP_RX_STOP,
+	OP_RX_STOP_DATA,
+};
+
+struct sh_mobile_i2c_data {
+	struct device *dev;
+	void __iomem *reg;
+	struct i2c_adapter adap;
+	unsigned long bus_speed;
+	unsigned int clks_per_count;
+	struct clk *clk;
+	u_int8_t icic;
+	u_int8_t flags;
+	u_int16_t iccl;
+	u_int16_t icch;
+
+	spinlock_t lock;
+	wait_queue_head_t wait;
+	struct i2c_msg *msg;
+	int pos;
+	int sr;
+	bool send_stop;
+	bool stop_after_dma;
+
+	struct resource *res;
+	struct dma_chan *dma_tx;
+	struct dma_chan *dma_rx;
+	struct scatterlist sg;
+	enum dma_data_direction dma_direction;
+};
+
+struct sh_mobile_dt_config {
+	int clks_per_count;
+	void (*setup)(struct sh_mobile_i2c_data *pd);
+};
+
+#define IIC_FLAG_HAS_ICIC67	(1 << 0)
+
+#define STANDARD_MODE		100000
+#define FAST_MODE		400000
+
+/* Register offsets */
+#define ICDR			0x00
+#define ICCR			0x04
+#define ICSR			0x08
+#define ICIC			0x0c
+#define ICCL			0x10
+#define ICCH			0x14
+#define ICSTART			0x70
+
+/* Register bits */
+#define ICCR_ICE		0x80
+#define ICCR_RACK		0x40
+#define ICCR_TRS		0x10
+#define ICCR_BBSY		0x04
+#define ICCR_SCP		0x01
+
+#define ICSR_SCLM		0x80
+#define ICSR_SDAM		0x40
+#define SW_DONE			0x20
+#define ICSR_BUSY		0x10
+#define ICSR_AL			0x08
+#define ICSR_TACK		0x04
+#define ICSR_WAIT		0x02
+#define ICSR_DTE		0x01
+
+#define ICIC_ICCLB8		0x80
+#define ICIC_ICCHB8		0x40
+#define ICIC_TDMAE		0x20
+#define ICIC_RDMAE		0x10
+#define ICIC_ALE		0x08
+#define ICIC_TACKE		0x04
+#define ICIC_WAITE		0x02
+#define ICIC_DTEE		0x01
+
+#define ICSTART_ICSTART		0x10
+
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+	if (offs == ICIC)
+		data |= pd->icic;
+
+	iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+	return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+			unsigned char set, unsigned char clr)
+{
+	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
+static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf)
+{
+	/*
+	 * Conditional expression:
+	 *   ICCL >= COUNT_CLK * (tLOW + tf)
+	 *
+	 * SH-Mobile IIC hardware starts counting the LOW period of
+	 * the SCL signal (tLOW) as soon as it pulls the SCL line.
+	 * In order to meet the tLOW timing spec, we need to take into
+	 * account the fall time of SCL signal (tf).  Default tf value
+	 * should be 0.3 us, for safety.
+	 */
+	return (((count_khz * (tLOW + tf)) + 5000) / 10000);
+}
+
+static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf)
+{
+	/*
+	 * Conditional expression:
+	 *   ICCH >= COUNT_CLK * (tHIGH + tf)
+	 *
+	 * SH-Mobile IIC hardware is aware of SCL transition period 'tr',
+	 * and can ignore it.  SH-Mobile IIC controller starts counting
+	 * the HIGH period of the SCL signal (tHIGH) after the SCL input
+	 * voltage increases at VIH.
+	 *
+	 * Afterward it turned out calculating ICCH using only tHIGH spec
+	 * will result in violation of the tHD;STA timing spec.  We need
+	 * to take into account the fall time of SDA signal (tf) at START
+	 * condition, in order to meet both tHIGH and tHD;STA specs.
+	 */
+	return (((count_khz * (tHIGH + tf)) + 5000) / 10000);
+}
+
+static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
+{
+	unsigned long i2c_clk_khz;
+	u32 tHIGH, tLOW, tf;
+	uint16_t max_val;
+
+	/* Get clock rate after clock is enabled */
+	clk_prepare_enable(pd->clk);
+	i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
+	clk_disable_unprepare(pd->clk);
+	i2c_clk_khz /= pd->clks_per_count;
+
+	if (pd->bus_speed == STANDARD_MODE) {
+		tLOW	= 47;	/* tLOW = 4.7 us */
+		tHIGH	= 40;	/* tHD;STA = tHIGH = 4.0 us */
+		tf	= 3;	/* tf = 0.3 us */
+	} else if (pd->bus_speed == FAST_MODE) {
+		tLOW	= 13;	/* tLOW = 1.3 us */
+		tHIGH	= 6;	/* tHD;STA = tHIGH = 0.6 us */
+		tf	= 3;	/* tf = 0.3 us */
+	} else {
+		dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
+			pd->bus_speed);
+		return -EINVAL;
+	}
+
+	pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
+	pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
+
+	max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
+	if (pd->iccl > max_val || pd->icch > max_val) {
+		dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n",
+			pd->iccl, pd->icch);
+		return -EINVAL;
+	}
+
+	/* one more bit of ICCL in ICIC */
+	if (pd->iccl & 0x100)
+		pd->icic |= ICIC_ICCLB8;
+	else
+		pd->icic &= ~ICIC_ICCLB8;
+
+	/* one more bit of ICCH in ICIC */
+	if (pd->icch & 0x100)
+		pd->icic |= ICIC_ICCHB8;
+	else
+		pd->icic &= ~ICIC_ICCHB8;
+
+	dev_dbg(pd->dev, "timing values: L/H=0x%x/0x%x\n", pd->iccl, pd->icch);
+	return 0;
+}
+
+static void activate_ch(struct sh_mobile_i2c_data *pd)
+{
+	/* Wake up device and enable clock */
+	pm_runtime_get_sync(pd->dev);
+	clk_prepare_enable(pd->clk);
+
+	/* Enable channel and configure rx ack */
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+
+	/* Mask all interrupts */
+	iic_wr(pd, ICIC, 0);
+
+	/* Set the clock */
+	iic_wr(pd, ICCL, pd->iccl & 0xff);
+	iic_wr(pd, ICCH, pd->icch & 0xff);
+}
+
+static void deactivate_ch(struct sh_mobile_i2c_data *pd)
+{
+	/* Clear/disable interrupts */
+	iic_wr(pd, ICSR, 0);
+	iic_wr(pd, ICIC, 0);
+
+	/* Disable channel */
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+
+	/* Disable clock and mark device as idle */
+	clk_disable_unprepare(pd->clk);
+	pm_runtime_put_sync(pd->dev);
+}
+
+static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
+			    enum sh_mobile_i2c_op op, unsigned char data)
+{
+	unsigned char ret = 0;
+	unsigned long flags;
+
+	dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data);
+
+	spin_lock_irqsave(&pd->lock, flags);
+
+	switch (op) {
+	case OP_START: /* issue start and trigger DTE interrupt */
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY);
+		break;
+	case OP_TX_FIRST: /* disable DTE interrupt and write data */
+		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICDR, data);
+		break;
+	case OP_TX: /* write data */
+		iic_wr(pd, ICDR, data);
+		break;
+	case OP_TX_STOP_DATA: /* write data and issue a stop afterwards */
+		iic_wr(pd, ICDR, data);
+		/* fallthrough */
+	case OP_TX_STOP: /* issue a stop */
+		iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
+					       : ICCR_ICE | ICCR_TRS | ICCR_BBSY);
+		break;
+	case OP_TX_TO_RX: /* select read mode */
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
+		break;
+	case OP_RX: /* just read data */
+		ret = iic_rd(pd, ICDR);
+		break;
+	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
+		break;
+	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		ret = iic_rd(pd, ICDR);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pd->lock, flags);
+
+	dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
+	return ret;
+}
+
+static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+	return pd->pos == -1;
+}
+
+static bool sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+	return pd->pos == pd->msg->len - 1;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+				   unsigned char *buf)
+{
+	switch (pd->pos) {
+	case -1:
+		*buf = i2c_8bit_addr_from_msg(pd->msg);
+		break;
+	default:
+		*buf = pd->msg->buf[pd->pos];
+	}
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+
+	if (pd->pos == pd->msg->len) {
+		/* Send stop if we haven't yet (DMA case) */
+		if (pd->send_stop && pd->stop_after_dma)
+			i2c_op(pd, OP_TX_STOP, 0);
+		return 1;
+	}
+
+	sh_mobile_i2c_get_data(pd, &data);
+
+	if (sh_mobile_i2c_is_last_byte(pd))
+		i2c_op(pd, OP_TX_STOP_DATA, data);
+	else if (sh_mobile_i2c_is_first_byte(pd))
+		i2c_op(pd, OP_TX_FIRST, data);
+	else
+		i2c_op(pd, OP_TX, data);
+
+	pd->pos++;
+	return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+	int real_pos;
+
+	do {
+		if (pd->pos <= -1) {
+			sh_mobile_i2c_get_data(pd, &data);
+
+			if (sh_mobile_i2c_is_first_byte(pd))
+				i2c_op(pd, OP_TX_FIRST, data);
+			else
+				i2c_op(pd, OP_TX, data);
+			break;
+		}
+
+		if (pd->pos == 0) {
+			i2c_op(pd, OP_TX_TO_RX, 0);
+			break;
+		}
+
+		real_pos = pd->pos - 2;
+
+		if (pd->pos == pd->msg->len) {
+			if (pd->stop_after_dma) {
+				/* Simulate PIO end condition after DMA transfer */
+				i2c_op(pd, OP_RX_STOP, 0);
+				pd->pos++;
+				break;
+			}
+
+			if (real_pos < 0) {
+				i2c_op(pd, OP_RX_STOP, 0);
+				break;
+			}
+			data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+		} else
+			data = i2c_op(pd, OP_RX, 0);
+
+		if (real_pos >= 0)
+			pd->msg->buf[real_pos] = data;
+	} while (0);
+
+	pd->pos++;
+	return pd->pos == (pd->msg->len + 2);
+}
+
+static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
+{
+	struct sh_mobile_i2c_data *pd = dev_id;
+	unsigned char sr;
+	int wakeup = 0;
+
+	sr = iic_rd(pd, ICSR);
+	pd->sr |= sr; /* remember state */
+
+	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
+	       (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+	       pd->pos, pd->msg->len);
+
+	/* Kick off TxDMA after preface was done */
+	if (pd->dma_direction == DMA_TO_DEVICE && pd->pos == 0)
+		iic_set_clr(pd, ICIC, ICIC_TDMAE, 0);
+	else if (sr & (ICSR_AL | ICSR_TACK))
+		/* don't interrupt transaction - continue to issue stop */
+		iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
+	else if (pd->msg->flags & I2C_M_RD)
+		wakeup = sh_mobile_i2c_isr_rx(pd);
+	else
+		wakeup = sh_mobile_i2c_isr_tx(pd);
+
+	/* Kick off RxDMA after preface was done */
+	if (pd->dma_direction == DMA_FROM_DEVICE && pd->pos == 1)
+		iic_set_clr(pd, ICIC, ICIC_RDMAE, 0);
+
+	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+		iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
+
+	if (wakeup) {
+		pd->sr |= SW_DONE;
+		wake_up(&pd->wait);
+	}
+
+	/* defeat write posting to avoid spurious WAIT interrupts */
+	iic_rd(pd, ICSR);
+
+	return IRQ_HANDLED;
+}
+
+static void sh_mobile_i2c_dma_unmap(struct sh_mobile_i2c_data *pd)
+{
+	struct dma_chan *chan = pd->dma_direction == DMA_FROM_DEVICE
+				? pd->dma_rx : pd->dma_tx;
+
+	dma_unmap_single(chan->device->dev, sg_dma_address(&pd->sg),
+			 pd->msg->len, pd->dma_direction);
+
+	pd->dma_direction = DMA_NONE;
+}
+
+static void sh_mobile_i2c_cleanup_dma(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->dma_direction == DMA_NONE)
+		return;
+	else if (pd->dma_direction == DMA_FROM_DEVICE)
+		dmaengine_terminate_all(pd->dma_rx);
+	else if (pd->dma_direction == DMA_TO_DEVICE)
+		dmaengine_terminate_all(pd->dma_tx);
+
+	sh_mobile_i2c_dma_unmap(pd);
+}
+
+static void sh_mobile_i2c_dma_callback(void *data)
+{
+	struct sh_mobile_i2c_data *pd = data;
+
+	sh_mobile_i2c_dma_unmap(pd);
+	pd->pos = pd->msg->len;
+	pd->stop_after_dma = true;
+
+	iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
+}
+
+static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
+				enum dma_transfer_direction dir, dma_addr_t port_addr)
+{
+	struct dma_chan *chan;
+	struct dma_slave_config cfg;
+	char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
+	int ret;
+
+	chan = dma_request_slave_channel_reason(dev, chan_name);
+	if (IS_ERR(chan)) {
+		dev_dbg(dev, "request_channel failed for %s (%ld)\n", chan_name,
+			PTR_ERR(chan));
+		return chan;
+	}
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.direction = dir;
+	if (dir == DMA_MEM_TO_DEV) {
+		cfg.dst_addr = port_addr;
+		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	} else {
+		cfg.src_addr = port_addr;
+		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	}
+
+	ret = dmaengine_slave_config(chan, &cfg);
+	if (ret) {
+		dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
+		dma_release_channel(chan);
+		return ERR_PTR(ret);
+	}
+
+	dev_dbg(dev, "got DMA channel for %s\n", chan_name);
+	return chan;
+}
+
+static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
+{
+	bool read = pd->msg->flags & I2C_M_RD;
+	enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	struct dma_chan *chan = read ? pd->dma_rx : pd->dma_tx;
+	struct dma_async_tx_descriptor *txdesc;
+	dma_addr_t dma_addr;
+	dma_cookie_t cookie;
+
+	if (PTR_ERR(chan) == -EPROBE_DEFER) {
+		if (read)
+			chan = pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
+									   pd->res->start + ICDR);
+		else
+			chan = pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
+									   pd->res->start + ICDR);
+	}
+
+	if (IS_ERR(chan))
+		return;
+
+	dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
+	if (dma_mapping_error(chan->device->dev, dma_addr)) {
+		dev_dbg(pd->dev, "dma map failed, using PIO\n");
+		return;
+	}
+
+	sg_dma_len(&pd->sg) = pd->msg->len;
+	sg_dma_address(&pd->sg) = dma_addr;
+
+	pd->dma_direction = dir;
+
+	txdesc = dmaengine_prep_slave_sg(chan, &pd->sg, 1,
+					 read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc) {
+		dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n");
+		sh_mobile_i2c_cleanup_dma(pd);
+		return;
+	}
+
+	txdesc->callback = sh_mobile_i2c_dma_callback;
+	txdesc->callback_param = pd;
+
+	cookie = dmaengine_submit(txdesc);
+	if (dma_submit_error(cookie)) {
+		dev_dbg(pd->dev, "submitting dma failed, using PIO\n");
+		sh_mobile_i2c_cleanup_dma(pd);
+		return;
+	}
+
+	dma_async_issue_pending(chan);
+}
+
+static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
+		    bool do_init)
+{
+	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+		dev_err(pd->dev, "Unsupported zero length i2c read\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (do_init) {
+		/* Initialize channel registers */
+		iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+
+		/* Enable channel and configure rx ack */
+		iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+
+		/* Set the clock */
+		iic_wr(pd, ICCL, pd->iccl & 0xff);
+		iic_wr(pd, ICCH, pd->icch & 0xff);
+	}
+
+	pd->msg = usr_msg;
+	pd->pos = -1;
+	pd->sr = 0;
+
+	if (pd->msg->len > 8)
+		sh_mobile_i2c_xfer_dma(pd);
+
+	/* Enable all interrupts to begin with */
+	iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+	return 0;
+}
+
+static int poll_dte(struct sh_mobile_i2c_data *pd)
+{
+	int i;
+
+	for (i = 1000; i; i--) {
+		u_int8_t val = iic_rd(pd, ICSR);
+
+		if (val & ICSR_DTE)
+			break;
+
+		if (val & ICSR_TACK)
+			return -ENXIO;
+
+		udelay(10);
+	}
+
+	return i ? 0 : -ETIMEDOUT;
+}
+
+static int poll_busy(struct sh_mobile_i2c_data *pd)
+{
+	int i;
+
+	for (i = 1000; i; i--) {
+		u_int8_t val = iic_rd(pd, ICSR);
+
+		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
+
+		/* the interrupt handler may wake us up before the
+		 * transfer is finished, so poll the hardware
+		 * until we're done.
+		 */
+		if (!(val & ICSR_BUSY)) {
+			/* handle missing acknowledge and arbitration lost */
+			val |= pd->sr;
+			if (val & ICSR_TACK)
+				return -ENXIO;
+			if (val & ICSR_AL)
+				return -EAGAIN;
+			break;
+		}
+
+		udelay(10);
+	}
+
+	return i ? 0 : -ETIMEDOUT;
+}
+
+static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
+			      struct i2c_msg *msgs,
+			      int num)
+{
+	struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
+	struct i2c_msg	*msg;
+	int err = 0;
+	int i;
+	long timeout;
+
+	activate_ch(pd);
+
+	/* Process all messages */
+	for (i = 0; i < num; i++) {
+		bool do_start = pd->send_stop || !i;
+		msg = &msgs[i];
+		pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
+		pd->stop_after_dma = false;
+
+		err = start_ch(pd, msg, do_start);
+		if (err)
+			break;
+
+		if (do_start)
+			i2c_op(pd, OP_START, 0);
+
+		/* The interrupt handler takes care of the rest... */
+		timeout = wait_event_timeout(pd->wait,
+				       pd->sr & (ICSR_TACK | SW_DONE),
+				       adapter->timeout);
+		if (!timeout) {
+			dev_err(pd->dev, "Transfer request timed out\n");
+			if (pd->dma_direction != DMA_NONE)
+				sh_mobile_i2c_cleanup_dma(pd);
+
+			err = -ETIMEDOUT;
+			break;
+		}
+
+		if (pd->send_stop)
+			err = poll_busy(pd);
+		else
+			err = poll_dte(pd);
+		if (err < 0)
+			break;
+	}
+
+	deactivate_ch(pd);
+
+	if (!err)
+		err = num;
+	return err;
+}
+
+static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
+	.functionality	= sh_mobile_i2c_func,
+	.master_xfer	= sh_mobile_i2c_xfer,
+};
+
+/*
+ * r8a7740 chip has lasting errata on I2C I/O pad reset.
+ * this is work-around for it.
+ */
+static void sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
+{
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+	iic_rd(pd, ICCR); /* dummy read */
+
+	iic_set_clr(pd, ICSTART, ICSTART_ICSTART, 0);
+	iic_rd(pd, ICSTART); /* dummy read */
+
+	udelay(10);
+
+	iic_wr(pd, ICCR, ICCR_SCP);
+	iic_wr(pd, ICSTART, 0);
+
+	udelay(10);
+
+	iic_wr(pd, ICCR, ICCR_TRS);
+	udelay(10);
+	iic_wr(pd, ICCR, 0);
+	udelay(10);
+	iic_wr(pd, ICCR, ICCR_TRS);
+	udelay(10);
+}
+
+static const struct sh_mobile_dt_config default_dt_config = {
+	.clks_per_count = 1,
+};
+
+static const struct sh_mobile_dt_config fast_clock_dt_config = {
+	.clks_per_count = 2,
+};
+
+static const struct sh_mobile_dt_config r8a7740_dt_config = {
+	.clks_per_count = 1,
+	.setup = sh_mobile_i2c_r8a7740_workaround,
+};
+
+static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
+	{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
+	{ .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
+
+static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
+{
+	if (!IS_ERR(pd->dma_tx)) {
+		dma_release_channel(pd->dma_tx);
+		pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
+	}
+
+	if (!IS_ERR(pd->dma_rx)) {
+		dma_release_channel(pd->dma_rx);
+		pd->dma_rx = ERR_PTR(-EPROBE_DEFER);
+	}
+}
+
+static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile_i2c_data *pd)
+{
+	struct resource *res;
+	resource_size_t n;
+	int k = 0, ret;
+
+	while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
+		for (n = res->start; n <= res->end; n++) {
+			ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
+					  0, dev_name(&dev->dev), pd);
+			if (ret) {
+				dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
+				return ret;
+			}
+		}
+		k++;
+	}
+
+	return k > 0 ? 0 : -ENOENT;
+}
+
+static int sh_mobile_i2c_probe(struct platform_device *dev)
+{
+	struct sh_mobile_i2c_data *pd;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	const struct of_device_id *match;
+	int ret;
+	u32 bus_speed;
+
+	pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->clk = devm_clk_get(&dev->dev, NULL);
+	if (IS_ERR(pd->clk)) {
+		dev_err(&dev->dev, "cannot get clock\n");
+		return PTR_ERR(pd->clk);
+	}
+
+	ret = sh_mobile_i2c_hook_irqs(dev, pd);
+	if (ret)
+		return ret;
+
+	pd->dev = &dev->dev;
+	platform_set_drvdata(dev, pd);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	pd->res = res;
+	pd->reg = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(pd->reg))
+		return PTR_ERR(pd->reg);
+
+	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
+	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
+	pd->clks_per_count = 1;
+
+	match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
+	if (match) {
+		const struct sh_mobile_dt_config *config = match->data;
+
+		pd->clks_per_count = config->clks_per_count;
+
+		if (config->setup)
+			config->setup(pd);
+	}
+
+	/* The IIC blocks on SH-Mobile ARM processors
+	 * come with two new bits in ICIC.
+	 */
+	if (resource_size(res) > 0x17)
+		pd->flags |= IIC_FLAG_HAS_ICIC67;
+
+	ret = sh_mobile_i2c_init(pd);
+	if (ret)
+		return ret;
+
+	/* Init DMA */
+	sg_init_table(&pd->sg, 1);
+	pd->dma_direction = DMA_NONE;
+	pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
+
+	/* Enable Runtime PM for this device.
+	 *
+	 * Also tell the Runtime PM core to ignore children
+	 * for this device since it is valid for us to suspend
+	 * this I2C master driver even though the slave devices
+	 * on the I2C bus may not be suspended.
+	 *
+	 * The state of the I2C hardware bus is unaffected by
+	 * the Runtime PM state.
+	 */
+	pm_suspend_ignore_children(&dev->dev, true);
+	pm_runtime_enable(&dev->dev);
+
+	/* setup the private data */
+	adap = &pd->adap;
+	i2c_set_adapdata(adap, pd);
+
+	adap->owner = THIS_MODULE;
+	adap->algo = &sh_mobile_i2c_algorithm;
+	adap->dev.parent = &dev->dev;
+	adap->retries = 5;
+	adap->nr = dev->id;
+	adap->dev.of_node = dev->dev.of_node;
+
+	strlcpy(adap->name, dev->name, sizeof(adap->name));
+
+	spin_lock_init(&pd->lock);
+	init_waitqueue_head(&pd->wait);
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret < 0) {
+		sh_mobile_i2c_release_dma(pd);
+		return ret;
+	}
+
+	dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz\n", adap->nr, pd->bus_speed);
+
+	return 0;
+}
+
+static int sh_mobile_i2c_remove(struct platform_device *dev)
+{
+	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&pd->adap);
+	sh_mobile_i2c_release_dma(pd);
+	pm_runtime_disable(&dev->dev);
+	return 0;
+}
+
+static int sh_mobile_i2c_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
+	.runtime_suspend = sh_mobile_i2c_runtime_nop,
+	.runtime_resume = sh_mobile_i2c_runtime_nop,
+};
+
+static struct platform_driver sh_mobile_i2c_driver = {
+	.driver		= {
+		.name		= "i2c-sh_mobile",
+		.pm		= &sh_mobile_i2c_dev_pm_ops,
+		.of_match_table = sh_mobile_i2c_dt_ids,
+	},
+	.probe		= sh_mobile_i2c_probe,
+	.remove		= sh_mobile_i2c_remove,
+};
+
+static int __init sh_mobile_i2c_adap_init(void)
+{
+	return platform_driver_register(&sh_mobile_i2c_driver);
+}
+subsys_initcall(sh_mobile_i2c_adap_init);
+
+static void __exit sh_mobile_i2c_adap_exit(void)
+{
+	platform_driver_unregister(&sh_mobile_i2c_driver);
+}
+module_exit(sh_mobile_i2c_adap_exit);
+
+MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
+MODULE_AUTHOR("Magnus Damm and Wolfram Sang");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-sh_mobile");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sibyte.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sibyte.c
new file mode 100644
index 0000000..2b6219d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sibyte.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2004 Steven J. Hill
+ * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 1995-2000 Simon G. Vogl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+struct i2c_algo_sibyte_data {
+	void *data;		/* private data */
+	int   bus;		/* which bus */
+	void *reg_base;		/* CSR base */
+};
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
+		      unsigned short flags, char read_write,
+		      u8 command, int size, union i2c_smbus_data * data)
+{
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+	int data_bytes = 0;
+	int error;
+
+	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		csr_out32((V_SMB_ADDR(addr) |
+			   (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+			   V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 1;
+		} else {
+			csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 1;
+		} else {
+			csr_out32(V_SMB_LB(data->byte),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 2;
+		} else {
+			csr_out32(V_SMB_LB(data->word & 0xff),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32(V_SMB_MB(data->word >> 8),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+	if (error & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+		return (error & M_SMB_ERROR_TYPE) ? -EIO : -ENXIO;
+	}
+
+	if (data_bytes == 1)
+		data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+	if (data_bytes == 2)
+		data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+	return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static const struct i2c_algorithm i2c_sibyte_algo = {
+	.smbus_xfer	= smbus_xfer,
+	.functionality	= bit_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+	/* Register new adapter to i2c module... */
+	i2c_adap->algo = &i2c_sibyte_algo;
+
+	/* Set the requested frequency. */
+	csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+	csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+	return i2c_add_numbered_adapter(i2c_adap);
+}
+
+
+static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
+	{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
+	{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
+};
+
+static struct i2c_adapter sibyte_board_adapter[2] = {
+	{
+		.owner		= THIS_MODULE,
+		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+		.algo		= NULL,
+		.algo_data	= &sibyte_board_data[0],
+		.nr		= 0,
+		.name		= "SiByte SMBus 0",
+	},
+	{
+		.owner		= THIS_MODULE,
+		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+		.algo		= NULL,
+		.algo_data	= &sibyte_board_data[1],
+		.nr		= 1,
+		.name		= "SiByte SMBus 1",
+	},
+};
+
+static int __init i2c_sibyte_init(void)
+{
+	pr_info("i2c-sibyte: i2c SMBus adapter module for SiByte board\n");
+	if (i2c_sibyte_add_bus(&sibyte_board_adapter[0], K_SMB_FREQ_100KHZ) < 0)
+		return -ENODEV;
+	if (i2c_sibyte_add_bus(&sibyte_board_adapter[1],
+			       K_SMB_FREQ_400KHZ) < 0) {
+		i2c_del_adapter(&sibyte_board_adapter[0]);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void __exit i2c_sibyte_exit(void)
+{
+	i2c_del_adapter(&sibyte_board_adapter[0]);
+	i2c_del_adapter(&sibyte_board_adapter[1]);
+}
+
+module_init(i2c_sibyte_init);
+module_exit(i2c_sibyte_exit);
+
+MODULE_AUTHOR("Kip Walker (Broadcom Corp.), Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-simtec.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-simtec.c
new file mode 100644
index 0000000..adca51a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-simtec.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Generic I2C Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+struct simtec_i2c_data {
+	struct resource		*ioarea;
+	void __iomem		*reg;
+	struct i2c_adapter	 adap;
+	struct i2c_algo_bit_data bit;
+};
+
+#define CMD_SET_SDA	(1<<2)
+#define CMD_SET_SCL	(1<<3)
+
+#define STATE_SDA	(1<<0)
+#define STATE_SCL	(1<<1)
+
+/* i2c bit-bus functions */
+
+static void simtec_i2c_setsda(void *pw, int state)
+{
+	struct simtec_i2c_data *pd = pw;
+	writeb(CMD_SET_SDA | (state ? STATE_SDA : 0), pd->reg);
+}
+
+static void simtec_i2c_setscl(void *pw, int state)
+{
+	struct simtec_i2c_data *pd = pw;
+	writeb(CMD_SET_SCL | (state ? STATE_SCL : 0), pd->reg);
+}
+
+static int simtec_i2c_getsda(void *pw)
+{
+	struct simtec_i2c_data *pd = pw;
+	return readb(pd->reg) & STATE_SDA ? 1 : 0;
+}
+
+static int simtec_i2c_getscl(void *pw)
+{
+	struct simtec_i2c_data *pd = pw;
+	return readb(pd->reg) & STATE_SCL ? 1 : 0;
+}
+
+/* device registration */
+
+static int simtec_i2c_probe(struct platform_device *dev)
+{
+	struct simtec_i2c_data *pd;
+	struct resource *res;
+	int size;
+	int ret;
+
+	pd = kzalloc(sizeof(struct simtec_i2c_data), GFP_KERNEL);
+	if (pd == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, pd);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&dev->dev, "cannot find IO resource\n");
+		ret = -ENOENT;
+		goto err;
+	}
+
+	size = resource_size(res);
+
+	pd->ioarea = request_mem_region(res->start, size, dev->name);
+	if (pd->ioarea == NULL) {
+		dev_err(&dev->dev, "cannot request IO\n");
+		ret = -ENXIO;
+		goto err;
+	}
+
+	pd->reg = ioremap(res->start, size);
+	if (pd->reg == NULL) {
+		dev_err(&dev->dev, "cannot map IO\n");
+		ret = -ENXIO;
+		goto err_res;
+	}
+
+	/* setup the private data */
+
+	pd->adap.owner = THIS_MODULE;
+	pd->adap.algo_data = &pd->bit;
+	pd->adap.dev.parent = &dev->dev;
+
+	strlcpy(pd->adap.name, "Simtec I2C", sizeof(pd->adap.name));
+
+	pd->bit.data = pd;
+	pd->bit.setsda = simtec_i2c_setsda;
+	pd->bit.setscl = simtec_i2c_setscl;
+	pd->bit.getsda = simtec_i2c_getsda;
+	pd->bit.getscl = simtec_i2c_getscl;
+	pd->bit.timeout = HZ;
+	pd->bit.udelay = 20;
+
+	ret = i2c_bit_add_bus(&pd->adap);
+	if (ret)
+		goto err_all;
+
+	return 0;
+
+ err_all:
+	iounmap(pd->reg);
+
+ err_res:
+	release_mem_region(pd->ioarea->start, size);
+
+ err:
+	kfree(pd);
+	return ret;
+}
+
+static int simtec_i2c_remove(struct platform_device *dev)
+{
+	struct simtec_i2c_data *pd = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&pd->adap);
+
+	iounmap(pd->reg);
+	release_mem_region(pd->ioarea->start, resource_size(pd->ioarea));
+	kfree(pd);
+
+	return 0;
+}
+
+/* device driver */
+
+static struct platform_driver simtec_i2c_driver = {
+	.driver		= {
+		.name		= "simtec-i2c",
+	},
+	.probe		= simtec_i2c_probe,
+	.remove		= simtec_i2c_remove,
+};
+
+module_platform_driver(simtec_i2c_driver);
+
+MODULE_DESCRIPTION("Simtec Generic I2C Bus driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:simtec-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sirf.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sirf.c
new file mode 100644
index 0000000..2fd8b6d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sirf.c
@@ -0,0 +1,479 @@
+/*
+ * I2C bus driver for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define SIRFSOC_I2C_CLK_CTRL		0x00
+#define SIRFSOC_I2C_STATUS		0x0C
+#define SIRFSOC_I2C_CTRL		0x10
+#define SIRFSOC_I2C_IO_CTRL		0x14
+#define SIRFSOC_I2C_SDA_DELAY		0x18
+#define SIRFSOC_I2C_CMD_START		0x1C
+#define SIRFSOC_I2C_CMD_BUF		0x30
+#define SIRFSOC_I2C_DATA_BUF		0x80
+
+#define SIRFSOC_I2C_CMD_BUF_MAX		16
+#define SIRFSOC_I2C_DATA_BUF_MAX	16
+
+#define SIRFSOC_I2C_CMD(x)		(SIRFSOC_I2C_CMD_BUF + (x)*0x04)
+#define SIRFSOC_I2C_DATA_MASK(x)        (0xFF<<(((x)&3)*8))
+#define SIRFSOC_I2C_DATA_SHIFT(x)       (((x)&3)*8)
+
+#define SIRFSOC_I2C_DIV_MASK		(0xFFFF)
+
+/* I2C status flags */
+#define SIRFSOC_I2C_STAT_BUSY		BIT(0)
+#define SIRFSOC_I2C_STAT_TIP		BIT(1)
+#define SIRFSOC_I2C_STAT_NACK		BIT(2)
+#define SIRFSOC_I2C_STAT_TR_INT		BIT(4)
+#define SIRFSOC_I2C_STAT_STOP		BIT(6)
+#define SIRFSOC_I2C_STAT_CMD_DONE	BIT(8)
+#define SIRFSOC_I2C_STAT_ERR		BIT(9)
+#define SIRFSOC_I2C_CMD_INDEX		(0x1F<<16)
+
+/* I2C control flags */
+#define SIRFSOC_I2C_RESET		BIT(0)
+#define SIRFSOC_I2C_CORE_EN		BIT(1)
+#define SIRFSOC_I2C_MASTER_MODE		BIT(2)
+#define SIRFSOC_I2C_CMD_DONE_EN		BIT(11)
+#define SIRFSOC_I2C_ERR_INT_EN		BIT(12)
+
+#define SIRFSOC_I2C_SDA_DELAY_MASK	(0xFF)
+#define SIRFSOC_I2C_SCLF_FILTER		(3<<8)
+
+#define SIRFSOC_I2C_START_CMD		BIT(0)
+
+#define SIRFSOC_I2C_CMD_RP(x)		((x)&0x7)
+#define SIRFSOC_I2C_NACK		BIT(3)
+#define SIRFSOC_I2C_WRITE		BIT(4)
+#define SIRFSOC_I2C_READ		BIT(5)
+#define SIRFSOC_I2C_STOP		BIT(6)
+#define SIRFSOC_I2C_START		BIT(7)
+
+#define SIRFSOC_I2C_DEFAULT_SPEED 100000
+#define SIRFSOC_I2C_ERR_NOACK      1
+#define SIRFSOC_I2C_ERR_TIMEOUT    2
+
+struct sirfsoc_i2c {
+	void __iomem *base;
+	struct clk *clk;
+	u32 cmd_ptr;		/* Current position in CMD buffer */
+	u8 *buf;		/* Buffer passed by user */
+	u32 msg_len;		/* Message length */
+	u32 finished_len;	/* number of bytes read/written */
+	u32 read_cmd_len;	/* number of read cmd sent */
+	int msg_read;		/* 1 indicates a read message */
+	int err_status;		/* 1 indicates an error on bus */
+
+	u32 sda_delay;		/* For suspend/resume */
+	u32 clk_div;
+	int last;		/* Last message in transfer, STOP cmd can be sent */
+
+	struct completion done;	/* indicates completion of message transfer */
+	struct i2c_adapter adapter;
+};
+
+static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic)
+{
+	u32 data = 0;
+	int i;
+
+	for (i = 0; i < siic->read_cmd_len; i++) {
+		if (!(i & 0x3))
+			data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i);
+		siic->buf[siic->finished_len++] =
+			(u8)((data & SIRFSOC_I2C_DATA_MASK(i)) >>
+				SIRFSOC_I2C_DATA_SHIFT(i));
+	}
+}
+
+static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic)
+{
+	u32 regval;
+	int i = 0;
+
+	if (siic->msg_read) {
+		while (((siic->finished_len + i) < siic->msg_len)
+				&& (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) {
+			regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0);
+			if (((siic->finished_len + i) ==
+					(siic->msg_len - 1)) && siic->last)
+				regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK;
+			writel(regval,
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+			i++;
+		}
+
+		siic->read_cmd_len = i;
+	} else {
+		while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1)
+				&& (siic->finished_len < siic->msg_len)) {
+			regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0);
+			if ((siic->finished_len == (siic->msg_len - 1))
+				&& siic->last)
+				regval |= SIRFSOC_I2C_STOP;
+			writel(regval,
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+			writel(siic->buf[siic->finished_len++],
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+		}
+	}
+	siic->cmd_ptr = 0;
+
+	/* Trigger the transfer */
+	writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START);
+}
+
+static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id)
+{
+	struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id;
+	u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS);
+
+	if (i2c_stat & SIRFSOC_I2C_STAT_ERR) {
+		/* Error conditions */
+		siic->err_status = SIRFSOC_I2C_ERR_NOACK;
+		writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS);
+
+		if (i2c_stat & SIRFSOC_I2C_STAT_NACK)
+			dev_dbg(&siic->adapter.dev, "ACK not received\n");
+		else
+			dev_err(&siic->adapter.dev, "I2C error\n");
+
+		/*
+		 * Due to hardware ANOMALY, we need to reset I2C earlier after
+		 * we get NOACK while accessing non-existing clients, otherwise
+		 * we will get errors even we access existing clients later
+		 */
+		writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
+				siic->base + SIRFSOC_I2C_CTRL);
+		while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+			cpu_relax();
+
+		complete(&siic->done);
+	} else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) {
+		/* CMD buffer execution complete */
+		if (siic->msg_read)
+			i2c_sirfsoc_read_data(siic);
+		if (siic->finished_len == siic->msg_len)
+			complete(&siic->done);
+		else /* Fill a new CMD buffer for left data */
+			i2c_sirfsoc_queue_cmd(siic);
+
+		writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
+	struct i2c_msg *msg)
+{
+	unsigned char addr;
+	u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE;
+
+	/* no data and last message -> add STOP */
+	if (siic->last && (msg->len == 0))
+		regval |= SIRFSOC_I2C_STOP;
+
+	writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+
+	addr = i2c_8bit_addr_from_msg(msg);
+
+	/* Reverse direction bit */
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
+	writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+}
+
+static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
+{
+	u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL);
+	/* timeout waiting for the xfer to finish or fail */
+	int timeout = msecs_to_jiffies((msg->len + 1) * 50);
+
+	i2c_sirfsoc_set_address(siic, msg);
+
+	writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN,
+		siic->base + SIRFSOC_I2C_CTRL);
+	i2c_sirfsoc_queue_cmd(siic);
+
+	if (wait_for_completion_timeout(&siic->done, timeout) == 0) {
+		siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT;
+		dev_err(&siic->adapter.dev, "Transfer timeout\n");
+	}
+
+	writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN),
+		siic->base + SIRFSOC_I2C_CTRL);
+	writel(0, siic->base + SIRFSOC_I2C_CMD_START);
+
+	/* i2c control doesn't response, reset it */
+	if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) {
+		writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
+			siic->base + SIRFSOC_I2C_CTRL);
+		while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+			cpu_relax();
+	}
+	return siic->err_status ? -EAGAIN : 0;
+}
+
+static u32 i2c_sirfsoc_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+	int num)
+{
+	struct sirfsoc_i2c *siic = adap->algo_data;
+	int i, ret;
+
+	clk_enable(siic->clk);
+
+	for (i = 0; i < num; i++) {
+		siic->buf = msgs[i].buf;
+		siic->msg_len = msgs[i].len;
+		siic->msg_read = !!(msgs[i].flags & I2C_M_RD);
+		siic->err_status = 0;
+		siic->cmd_ptr = 0;
+		siic->finished_len = 0;
+		siic->last = (i == (num - 1));
+
+		ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]);
+		if (ret) {
+			clk_disable(siic->clk);
+			return ret;
+		}
+	}
+
+	clk_disable(siic->clk);
+	return num;
+}
+
+/* I2C algorithms associated with this master controller driver */
+static const struct i2c_algorithm i2c_sirfsoc_algo = {
+	.master_xfer = i2c_sirfsoc_xfer,
+	.functionality = i2c_sirfsoc_func,
+};
+
+static int i2c_sirfsoc_probe(struct platform_device *pdev)
+{
+	struct sirfsoc_i2c *siic;
+	struct i2c_adapter *adap;
+	struct resource *mem_res;
+	struct clk *clk;
+	int bitrate;
+	int ctrl_speed;
+	int irq;
+
+	int err;
+	u32 regval;
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(&pdev->dev, "Clock get failed\n");
+		goto err_get_clk;
+	}
+
+	err = clk_prepare(clk);
+	if (err) {
+		dev_err(&pdev->dev, "Clock prepare failed\n");
+		goto err_clk_prep;
+	}
+
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(&pdev->dev, "Clock enable failed\n");
+		goto err_clk_en;
+	}
+
+	ctrl_speed = clk_get_rate(clk);
+
+	siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL);
+	if (!siic) {
+		err = -ENOMEM;
+		goto out;
+	}
+	adap = &siic->adapter;
+	adap->class = I2C_CLASS_DEPRECATED;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
+	if (IS_ERR(siic->base)) {
+		err = PTR_ERR(siic->base);
+		goto out;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto out;
+	}
+	err = devm_request_irq(&pdev->dev, irq, i2c_sirfsoc_irq, 0,
+		dev_name(&pdev->dev), siic);
+	if (err)
+		goto out;
+
+	adap->algo = &i2c_sirfsoc_algo;
+	adap->algo_data = siic;
+	adap->retries = 3;
+
+	adap->dev.of_node = pdev->dev.of_node;
+	adap->dev.parent = &pdev->dev;
+	adap->nr = pdev->id;
+
+	strlcpy(adap->name, "sirfsoc-i2c", sizeof(adap->name));
+
+	platform_set_drvdata(pdev, adap);
+	init_completion(&siic->done);
+
+	/* Controller Initalisation */
+
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+		cpu_relax();
+	writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
+		siic->base + SIRFSOC_I2C_CTRL);
+
+	siic->clk = clk;
+
+	err = of_property_read_u32(pdev->dev.of_node,
+		"clock-frequency", &bitrate);
+	if (err < 0)
+		bitrate = SIRFSOC_I2C_DEFAULT_SPEED;
+
+	/*
+	 * Due to some hardware design issues, we need to tune the formula.
+	 * Since i2c is open drain interface that allows the slave to
+	 * stall the transaction by holding the SCL line at '0', the RTL
+	 * implementation is waiting for SCL feedback from the pin after
+	 * setting it to High-Z ('1'). This wait adds to the high-time
+	 * interval counter few cycles of the input synchronization
+	 * (depending on the SCL_FILTER_REG field), and also the time it
+	 * takes for the board pull-up resistor to rise the SCL line.
+	 * For slow SCL settings these additions are negligible,
+	 * but they start to affect the speed when clock is set to faster
+	 * frequencies.
+	 * Through the actual tests, use the different user_div value(which
+	 * in the divider formular 'Fio / (Fi2c * user_div)') to adapt
+	 * the different ranges of i2c bus clock frequency, to make the SCL
+	 * more accurate.
+	 */
+	if (bitrate <= 30000)
+		regval = ctrl_speed / (bitrate * 5);
+	else if (bitrate > 30000 && bitrate <= 280000)
+		regval = (2 * ctrl_speed) / (bitrate * 11);
+	else
+		regval = ctrl_speed / (bitrate * 6);
+
+	writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL);
+	if (regval > 0xFF)
+		writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY);
+	else
+		writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY);
+
+	err = i2c_add_numbered_adapter(adap);
+	if (err < 0)
+		goto out;
+
+	clk_disable(clk);
+
+	dev_info(&pdev->dev, " I2C adapter ready to operate\n");
+
+	return 0;
+
+out:
+	clk_disable(clk);
+err_clk_en:
+	clk_unprepare(clk);
+err_clk_prep:
+	clk_put(clk);
+err_get_clk:
+	return err;
+}
+
+static int i2c_sirfsoc_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	i2c_del_adapter(adapter);
+	clk_unprepare(siic->clk);
+	clk_put(siic->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_sirfsoc_suspend(struct device *dev)
+{
+	struct i2c_adapter *adapter = dev_get_drvdata(dev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	clk_enable(siic->clk);
+	siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY);
+	siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL);
+	clk_disable(siic->clk);
+	return 0;
+}
+
+static int i2c_sirfsoc_resume(struct device *dev)
+{
+	struct i2c_adapter *adapter = dev_get_drvdata(dev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	clk_enable(siic->clk);
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+		cpu_relax();
+	writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
+		siic->base + SIRFSOC_I2C_CTRL);
+	writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL);
+	writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY);
+	clk_disable(siic->clk);
+	return 0;
+}
+
+static const struct dev_pm_ops i2c_sirfsoc_pm_ops = {
+	.suspend = i2c_sirfsoc_suspend,
+	.resume = i2c_sirfsoc_resume,
+};
+#endif
+
+static const struct of_device_id sirfsoc_i2c_of_match[] = {
+	{ .compatible = "sirf,prima2-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match);
+
+static struct platform_driver i2c_sirfsoc_driver = {
+	.driver = {
+		.name = "sirfsoc_i2c",
+#ifdef CONFIG_PM
+		.pm = &i2c_sirfsoc_pm_ops,
+#endif
+		.of_match_table = sirfsoc_i2c_of_match,
+	},
+	.probe = i2c_sirfsoc_probe,
+	.remove = i2c_sirfsoc_remove,
+};
+module_platform_driver(i2c_sirfsoc_driver);
+
+MODULE_DESCRIPTION("SiRF SoC I2C master controller driver");
+MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, "
+	"Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis5595.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis5595.c
new file mode 100644
index 0000000..d543a98
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis5595.c
@@ -0,0 +1,430 @@
+/*
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/* Note: we assume there can only be one SIS5595 with one SMBus interface */
+
+/*
+   Note: all have mfr. ID 0x1039.
+   SUPPORTED		PCI ID		
+	5595		0008
+
+   Note: these chips contain a 0008 device which is incompatible with the
+         5595. We recognize these by the presence of the listed
+         "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
+	 540		0008		0540
+	 550		0008		0550
+	5513		0008		5511
+	5581		0008		5597
+	5582		0008		5597
+	5597		0008		5597
+	5598		0008		5597/5598
+	 630		0008		0630
+	 645		0008		0645
+	 646		0008		0646
+	 648		0008		0648
+	 650		0008		0650
+	 651		0008		0651
+	 730		0008		0730
+	 735		0008		0735
+	 745		0008		0745
+	 746		0008		0746
+*/
+
+/* TO DO: 
+ * Add Block Transfers (ugly, but supported by the adapter)
+ * Add adapter resets
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+static int blacklist[] = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_646,
+	PCI_DEVICE_ID_SI_648,
+	PCI_DEVICE_ID_SI_650,
+	PCI_DEVICE_ID_SI_651,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_745,
+	PCI_DEVICE_ID_SI_746,
+	PCI_DEVICE_ID_SI_5511,	/* 5513 chip has the 0008 device but that ID
+				   shows up in other chips so we use the 5511
+				   ID for recognition */
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0,			/* terminates the list */
+};
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT		8
+/* SIS5595 SMBus registers */
+#define SMB_STS_LO		0x00
+#define SMB_STS_HI		0x01
+#define SMB_CTL_LO		0x02
+#define SMB_CTL_HI		0x03
+#define SMB_ADDR		0x04
+#define SMB_CMD			0x05
+#define SMB_PCNT		0x06
+#define SMB_CNT			0x07
+#define SMB_BYTE		0x08
+#define SMB_DEV			0x10
+#define SMB_DB0			0x11
+#define SMB_DB1			0x12
+#define SMB_HAA			0x13
+
+/* PCI Address Constants */
+#define SMB_INDEX		0x38
+#define SMB_DAT			0x39
+#define SIS5595_ENABLE_REG	0x40
+#define ACPI_BASE		0x90
+
+/* Other settings */
+#define MAX_TIMEOUT		500
+
+/* SIS5595 constants */
+#define SIS5595_QUICK		0x00
+#define SIS5595_BYTE		0x02
+#define SIS5595_BYTE_DATA	0x04
+#define SIS5595_WORD_DATA	0x06
+#define SIS5595_PROC_CALL	0x08
+#define SIS5595_BLOCK_DATA	0x0A
+
+/* insmod parameters */
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr;
+module_param_hw(force_addr, ushort, ioport, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
+
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
+static struct pci_dev *sis5595_pdev;
+
+static u8 sis5595_read(u8 reg)
+{
+	outb(reg, sis5595_base + SMB_INDEX);
+	return inb(sis5595_base + SMB_DAT);
+}
+
+static void sis5595_write(u8 reg, u8 data)
+{
+	outb(reg, sis5595_base + SMB_INDEX);
+	outb(data, sis5595_base + SMB_DAT);
+}
+
+static int sis5595_setup(struct pci_dev *SIS5595_dev)
+{
+	u16 a;
+	u8 val;
+	int *i;
+	int retval;
+
+	/* Look for imposters */
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *dev;
+		dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (dev) {
+			dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+			pci_dev_put(dev);
+			return -ENODEV;
+		}
+	}
+
+	/* Determine the address of the SMBus areas */
+	pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base);
+	if (sis5595_base == 0 && force_addr == 0) {
+		dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+	if (force_addr)
+		sis5595_base = force_addr & ~(SIS5595_EXTENT - 1);
+	dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base);
+
+	/* NB: We grab just the two SMBus registers here, but this may still
+	 * interfere with ACPI :-(  */
+	retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
+				   sis5595_driver.name);
+	if (retval)
+		return retval;
+
+	if (!request_region(sis5595_base + SMB_INDEX, 2,
+			    sis5595_driver.name)) {
+		dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
+			sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
+		return -ENODEV;
+	}
+
+	if (force_addr) {
+		dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
+		if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
+			/* doesn't work for some chips! */
+			dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n");
+			goto error;
+		}
+	}
+
+	if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+	    != PCIBIOS_SUCCESSFUL)
+		goto error;
+	if ((val & 0x80) == 0) {
+		dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
+		if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if ((val & 0x80) == 0) {
+			/* doesn't work for some chips? */
+			dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n");
+			goto error;
+		}
+	}
+
+	/* Everything is happy */
+	return 0;
+
+error:
+	release_region(sis5595_base + SMB_INDEX, 2);
+	return -ENODEV;
+}
+
+static int sis5595_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00) {
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp);
+		sis5595_write(SMB_STS_LO, temp & 0xff);
+		sis5595_write(SMB_STS_HI, temp >> 8);
+		if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
+			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&adap->dev, "Successful!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 4 */
+	sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis5595_read(SMB_STS_LO);
+	} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+
+	if (temp & 0x10) {
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+		result = -ENXIO;
+	}
+
+	if (temp & 0x20) {
+		dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
+			"next hard reset (or not...)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+		result = -EIO;
+	}
+
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00) {
+		sis5595_write(SMB_STS_LO, temp & 0xff);
+		sis5595_write(SMB_STS_HI, temp >> 8);
+	}
+
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00)
+		dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp);
+
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
+			  unsigned short flags, char read_write,
+			  u8 command, int size, union i2c_smbus_data *data)
+{
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS5595_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis5595_write(SMB_CMD, command);
+		size = SIS5595_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis5595_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis5595_write(SMB_BYTE, data->byte);
+		size = SIS5595_BYTE_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis5595_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis5595_write(SMB_BYTE, data->word & 0xff);
+			sis5595_write(SMB_BYTE + 1,
+				      (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
+
+	status = sis5595_transaction(adap);
+	if (status)
+		return status;
+
+	if ((size != SIS5595_PROC_CALL) &&
+	    ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
+		return 0;
+
+
+	switch (size) {
+	case SIS5595_BYTE:
+	case SIS5595_BYTE_DATA:
+		data->byte = sis5595_read(SMB_BYTE);
+		break;
+	case SIS5595_WORD_DATA:
+	case SIS5595_PROC_CALL:
+		data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+	return 0;
+}
+
+static u32 sis5595_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sis5595_access,
+	.functionality	= sis5595_func,
+};
+
+static struct i2c_adapter sis5595_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static const struct pci_device_id sis5595_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, 
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis5595_ids);
+
+static int sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int err;
+
+	if (sis5595_setup(dev)) {
+		dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	sis5595_adapter.dev.parent = &dev->dev;
+
+	snprintf(sis5595_adapter.name, sizeof(sis5595_adapter.name),
+		 "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX);
+	err = i2c_add_adapter(&sis5595_adapter);
+	if (err) {
+		release_region(sis5595_base + SMB_INDEX, 2);
+		return err;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	sis5595_pdev =  pci_dev_get(dev);
+	return -ENODEV;
+}
+
+static struct pci_driver sis5595_driver = {
+	.name		= "sis5595_smbus",
+	.id_table	= sis5595_ids,
+	.probe		= sis5595_probe,
+};
+
+static int __init i2c_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_driver);
+}
+
+static void __exit i2c_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_driver);
+	if (sis5595_pdev) {
+		i2c_del_adapter(&sis5595_adapter);
+		release_region(sis5595_base + SMB_INDEX, 2);
+		pci_dev_put(sis5595_pdev);
+		sis5595_pdev = NULL;
+	}
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("SIS5595 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sis5595_init);
+module_exit(i2c_sis5595_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis630.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis630.c
new file mode 100644
index 0000000..1e6805b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis630.c
@@ -0,0 +1,557 @@
+/*
+    Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+   Status: beta
+
+   Supports:
+	SIS 630
+	SIS 730
+	SIS 964
+
+   Notable differences between chips:
+	+------------------------+--------------------+-------------------+
+	|                        |     SIS630/730     |      SIS964       |
+	+------------------------+--------------------+-------------------+
+	| Clock                  | 14kHz/56kHz        | 55.56kHz/27.78kHz |
+	| SMBus registers offset | 0x80               | 0xE0              |
+	| SMB_CNT                | Bit 1 = Slave Busy | Bit 1 = Bus probe |
+	|         (not used yet) | Bit 3 is reserved  | Bit 3 = Last byte |
+	| SMB_PCOUNT		 | Offset + 0x06      | Offset + 0x14     |
+	| SMB_COUNT              | 4:0 bits           | 5:0 bits          |
+	+------------------------+--------------------+-------------------+
+	(Other differences don't affect the functions provided by the driver)
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* SIS964 id is defined here as we are the only file using it */
+#define PCI_DEVICE_ID_SI_964	0x0964
+
+/* SIS630/730/964 SMBus registers */
+#define SMB_STS			0x00	/* status */
+#define SMB_CNT			0x02	/* control */
+#define SMBHOST_CNT		0x03	/* host control */
+#define SMB_ADDR		0x04	/* address */
+#define SMB_CMD			0x05	/* command */
+#define SMB_COUNT		0x07	/* byte count */
+#define SMB_BYTE		0x08	/* ~0x8F data byte field */
+
+/* SMB_STS register */
+#define BYTE_DONE_STS		0x10	/* Byte Done Status / Block Array */
+#define SMBCOL_STS		0x04	/* Collision */
+#define SMBERR_STS		0x02	/* Device error */
+
+/* SMB_CNT register */
+#define MSTO_EN			0x40	/* Host Master Timeout Enable */
+#define SMBCLK_SEL		0x20	/* Host master clock selection */
+#define SMB_PROBE		0x02	/* Bus Probe/Slave busy */
+#define SMB_HOSTBUSY		0x01	/* Host Busy */
+
+/* SMBHOST_CNT register */
+#define SMB_KILL		0x20	/* Kill */
+#define SMB_START		0x10	/* Start */
+
+/* register count for request_region
+ * As we don't use SMB_PCOUNT, 20 is ok for SiS630 and SiS964
+ */
+#define SIS630_SMB_IOREGION	20
+
+/* PCI address constants */
+/* acpi base address register  */
+#define SIS630_ACPI_BASE_REG	0x74
+/* bios control register */
+#define SIS630_BIOS_CTL_REG	0x40
+
+/* Other settings */
+#define MAX_TIMEOUT		500
+
+/* SIS630 constants */
+#define SIS630_QUICK		0x00
+#define SIS630_BYTE		0x01
+#define SIS630_BYTE_DATA	0x02
+#define SIS630_WORD_DATA	0x03
+#define SIS630_PCALL		0x04
+#define SIS630_BLOCK_DATA	0x05
+
+static struct pci_driver sis630_driver;
+
+/* insmod parameters */
+static bool high_clock;
+static bool force;
+module_param(high_clock, bool, 0);
+MODULE_PARM_DESC(high_clock,
+	"Set Host Master Clock to 56KHz (default 14KHz) (SIS630/730 only).");
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
+
+/* SMBus base adress */
+static unsigned short smbus_base;
+
+/* supported chips */
+static int supported[] = {
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_760,
+	0 /* terminates the list */
+};
+
+static inline u8 sis630_read(u8 reg)
+{
+	return inb(smbus_base + reg);
+}
+
+static inline void sis630_write(u8 reg, u8 data)
+{
+	outb(data, smbus_base + reg);
+}
+
+static int sis630_transaction_start(struct i2c_adapter *adap, int size,
+				    u8 *oldclock)
+{
+	int temp;
+
+	/* Make sure the SMBus host is ready to start transmitting. */
+	temp = sis630_read(SMB_CNT);
+	if ((temp & (SMB_PROBE | SMB_HOSTBUSY)) != 0x00) {
+		dev_dbg(&adap->dev, "SMBus busy (%02x). Resetting...\n", temp);
+		/* kill smbus transaction */
+		sis630_write(SMBHOST_CNT, SMB_KILL);
+
+		temp = sis630_read(SMB_CNT);
+		if (temp & (SMB_PROBE | SMB_HOSTBUSY)) {
+			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&adap->dev, "Successful!\n");
+		}
+	}
+
+	/* save old clock, so we can prevent machine for hung */
+	*oldclock = sis630_read(SMB_CNT);
+
+	dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock);
+
+	/* disable timeout interrupt,
+	 * set Host Master Clock to 56KHz if requested */
+	if (high_clock)
+		sis630_write(SMB_CNT, SMBCLK_SEL);
+	else
+		sis630_write(SMB_CNT, (*oldclock & ~MSTO_EN));
+
+	/* clear all sticky bits */
+	temp = sis630_read(SMB_STS);
+	sis630_write(SMB_STS, temp & 0x1e);
+
+	/* start the transaction by setting bit 4 and size */
+	sis630_write(SMBHOST_CNT, SMB_START | (size & 0x07));
+
+	return 0;
+}
+
+static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
+{
+	int temp, result = 0, timeout = 0;
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis630_read(SMB_STS);
+		/* check if block transmitted */
+		if (size == SIS630_BLOCK_DATA && (temp & BYTE_DONE_STS))
+			break;
+	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+
+	if (temp & SMBERR_STS) {
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+		result = -ENXIO;
+	}
+
+	if (temp & SMBCOL_STS) {
+		dev_err(&adap->dev, "Bus collision!\n");
+		result = -EAGAIN;
+	}
+
+	return result;
+}
+
+static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
+{
+	/* clear all status "sticky" bits */
+	sis630_write(SMB_STS, 0xFF);
+
+	dev_dbg(&adap->dev,
+		"SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
+
+	/*
+	 * restore old Host Master Clock if high_clock is set
+	 * and oldclock was not 56KHz
+	 */
+	if (high_clock && !(oldclock & SMBCLK_SEL))
+		sis630_write(SMB_CNT, sis630_read(SMB_CNT) & ~SMBCLK_SEL);
+
+	dev_dbg(&adap->dev,
+		"SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
+}
+
+static int sis630_transaction(struct i2c_adapter *adap, int size)
+{
+	int result = 0;
+	u8 oldclock = 0;
+
+	result = sis630_transaction_start(adap, size, &oldclock);
+	if (!result) {
+		result = sis630_transaction_wait(adap, size);
+		sis630_transaction_end(adap, oldclock);
+	}
+
+	return result;
+}
+
+static int sis630_block_data(struct i2c_adapter *adap,
+			     union i2c_smbus_data *data, int read_write)
+{
+	int i, len = 0, rc = 0;
+	u8 oldclock = 0;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		if (len < 0)
+			len = 0;
+		else if (len > 32)
+			len = 32;
+		sis630_write(SMB_COUNT, len);
+		for (i = 1; i <= len; i++) {
+			dev_dbg(&adap->dev,
+				"set data 0x%02x\n", data->block[i]);
+			/* set data */
+			sis630_write(SMB_BYTE + (i - 1) % 8, data->block[i]);
+			if (i == 8 || (len < 8 && i == len)) {
+				dev_dbg(&adap->dev,
+					"start trans len=%d i=%d\n", len, i);
+				/* first transaction */
+				rc = sis630_transaction_start(adap,
+						SIS630_BLOCK_DATA, &oldclock);
+				if (rc)
+					return rc;
+			} else if ((i - 1) % 8 == 7 || i == len) {
+				dev_dbg(&adap->dev,
+					"trans_wait len=%d i=%d\n", len, i);
+				if (i > 8) {
+					dev_dbg(&adap->dev,
+						"clear smbary_sts"
+						" len=%d i=%d\n", len, i);
+					/*
+					   If this is not first transaction,
+					   we must clear sticky bit.
+					   clear SMBARY_STS
+					*/
+					sis630_write(SMB_STS, BYTE_DONE_STS);
+				}
+				rc = sis630_transaction_wait(adap,
+						SIS630_BLOCK_DATA);
+				if (rc) {
+					dev_dbg(&adap->dev,
+						"trans_wait failed\n");
+					break;
+				}
+			}
+		}
+	} else {
+		/* read request */
+		data->block[0] = len = 0;
+		rc = sis630_transaction_start(adap,
+				SIS630_BLOCK_DATA, &oldclock);
+		if (rc)
+			return rc;
+		do {
+			rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA);
+			if (rc) {
+				dev_dbg(&adap->dev, "trans_wait failed\n");
+				break;
+			}
+			/* if this first transaction then read byte count */
+			if (len == 0)
+				data->block[0] = sis630_read(SMB_COUNT);
+
+			/* just to be sure */
+			if (data->block[0] > 32)
+				data->block[0] = 32;
+
+			dev_dbg(&adap->dev,
+				"block data read len=0x%x\n", data->block[0]);
+
+			for (i = 0; i < 8 && len < data->block[0]; i++, len++) {
+				dev_dbg(&adap->dev,
+					"read i=%d len=%d\n", i, len);
+				data->block[len + 1] = sis630_read(SMB_BYTE +
+								   i);
+			}
+
+			dev_dbg(&adap->dev,
+				"clear smbary_sts len=%d i=%d\n", len, i);
+
+			/* clear SMBARY_STS */
+			sis630_write(SMB_STS, BYTE_DONE_STS);
+		} while (len < data->block[0]);
+	}
+
+	sis630_transaction_end(adap, oldclock);
+
+	return rc;
+}
+
+/* Return negative errno on error. */
+static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
+			 unsigned short flags, char read_write,
+			 u8 command, int size, union i2c_smbus_data *data)
+{
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis630_write(SMB_ADDR,
+			     ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS630_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		sis630_write(SMB_ADDR,
+			     ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis630_write(SMB_CMD, command);
+		size = SIS630_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		sis630_write(SMB_ADDR,
+			     ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis630_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis630_write(SMB_BYTE, data->byte);
+		size = SIS630_BYTE_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis630_write(SMB_ADDR,
+			     ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis630_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis630_write(SMB_BYTE, data->word & 0xff);
+			sis630_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL ?
+			SIS630_PCALL : SIS630_WORD_DATA);
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		sis630_write(SMB_ADDR,
+			     ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis630_write(SMB_CMD, command);
+		size = SIS630_BLOCK_DATA;
+		return sis630_block_data(adap, data, read_write);
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	status = sis630_transaction(adap, size);
+	if (status)
+		return status;
+
+	if ((size != SIS630_PCALL) &&
+		((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) {
+		return 0;
+	}
+
+	switch (size) {
+	case SIS630_BYTE:
+	case SIS630_BYTE_DATA:
+		data->byte = sis630_read(SMB_BYTE);
+		break;
+	case SIS630_PCALL:
+	case SIS630_WORD_DATA:
+		data->word = sis630_read(SMB_BYTE) +
+			     (sis630_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 sis630_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static int sis630_setup(struct pci_dev *sis630_dev)
+{
+	unsigned char b;
+	struct pci_dev *dummy = NULL;
+	int retval, i;
+	/* acpi base address */
+	unsigned short acpi_base;
+
+	/* check for supported SiS devices */
+	for (i = 0; supported[i] > 0; i++) {
+		dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy);
+		if (dummy)
+			break; /* found */
+	}
+
+	if (dummy) {
+		pci_dev_put(dummy);
+	} else if (force) {
+		dev_err(&sis630_dev->dev,
+			"WARNING: Can't detect SIS630 compatible device, but "
+			"loading because of force option enabled\n");
+	} else {
+		return -ENODEV;
+	}
+
+	/*
+	   Enable ACPI first , so we can accsess reg 74-75
+	   in acpi io space and read acpi base addr
+	*/
+	if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, &b)) {
+		dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+	/* if ACPI already enabled , do nothing */
+	if (!(b & 0x80) &&
+	    pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) {
+		dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	/* Determine the ACPI base address */
+	if (pci_read_config_word(sis630_dev,
+				 SIS630_ACPI_BASE_REG, &acpi_base)) {
+		dev_err(&sis630_dev->dev,
+			"Error: Can't determine ACPI base address\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04hx\n", acpi_base);
+
+	if (supported[i] == PCI_DEVICE_ID_SI_760)
+		smbus_base = acpi_base + 0xE0;
+	else
+		smbus_base = acpi_base + 0x80;
+
+	dev_dbg(&sis630_dev->dev, "SMBus base at 0x%04hx\n", smbus_base);
+
+	retval = acpi_check_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
+				   sis630_driver.name);
+	if (retval)
+		goto exit;
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	if (!request_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
+			    sis630_driver.name)) {
+		dev_err(&sis630_dev->dev,
+			"I/O Region 0x%04hx-0x%04hx for SMBus already in use.\n",
+			smbus_base + SMB_STS,
+			smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	retval = 0;
+
+exit:
+	if (retval)
+		smbus_base = 0;
+	return retval;
+}
+
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sis630_access,
+	.functionality	= sis630_func,
+};
+
+static struct i2c_adapter sis630_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+	.retries	= 3
+};
+
+static const struct pci_device_id sis630_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sis630_ids);
+
+static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (sis630_setup(dev)) {
+		dev_err(&dev->dev,
+			"SIS630 compatible bus not detected, "
+			"module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	sis630_adapter.dev.parent = &dev->dev;
+
+	snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
+		 "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
+
+	return i2c_add_adapter(&sis630_adapter);
+}
+
+static void sis630_remove(struct pci_dev *dev)
+{
+	if (smbus_base) {
+		i2c_del_adapter(&sis630_adapter);
+		release_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION);
+		smbus_base = 0;
+	}
+}
+
+
+static struct pci_driver sis630_driver = {
+	.name		= "sis630_smbus",
+	.id_table	= sis630_ids,
+	.probe		= sis630_probe,
+	.remove		= sis630_remove,
+};
+
+module_pci_driver(sis630_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>");
+MODULE_DESCRIPTION("SIS630 SMBus driver");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis96x.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis96x.c
new file mode 100644
index 0000000..44b9044
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sis96x.c
@@ -0,0 +1,326 @@
+/*
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+    This module must be considered BETA unless and until
+    the chipset manufacturer releases a datasheet.
+    The register definitions are based on the SiS630.
+
+    This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
+    for just about every machine for which users have reported.
+    If this module isn't detecting your 96x south bridge, have a 
+    look there.
+
+    We assume there can only be one SiS96x with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* base address register in PCI config space */
+#define SIS96x_BAR 0x04
+
+/* SiS96x SMBus registers */
+#define SMB_STS      0x00
+#define SMB_EN       0x01
+#define SMB_CNT      0x02
+#define SMB_HOST_CNT 0x03
+#define SMB_ADDR     0x04
+#define SMB_CMD      0x05
+#define SMB_PCOUNT   0x06
+#define SMB_COUNT    0x07
+#define SMB_BYTE     0x08
+#define SMB_DEV_ADDR 0x10
+#define SMB_DB0      0x11
+#define SMB_DB1      0x12
+#define SMB_SAA      0x13
+
+/* register count for request_region */
+#define SMB_IOSIZE 0x20
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+
+/* SiS96x SMBus constants */
+#define SIS96x_QUICK      0x00
+#define SIS96x_BYTE       0x01
+#define SIS96x_BYTE_DATA  0x02
+#define SIS96x_WORD_DATA  0x03
+#define SIS96x_PROC_CALL  0x04
+#define SIS96x_BLOCK_DATA 0x05
+
+static struct pci_driver sis96x_driver;
+static struct i2c_adapter sis96x_adapter;
+static u16 sis96x_smbus_base;
+
+static inline u8 sis96x_read(u8 reg)
+{
+	return inb(sis96x_smbus_base + reg) ;
+}
+
+static inline void sis96x_write(u8 reg, u8 data)
+{
+	outb(data, sis96x_smbus_base + reg) ;
+}
+
+/* Execute a SMBus transaction.
+   int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
+ */
+static int sis96x_transaction(int size)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+
+		dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
+			"Resetting...\n", temp);
+
+		/* kill the transaction */
+		sis96x_write(SMB_HOST_CNT, 0x20);
+
+		/* check it again */
+		if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+			dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&sis96x_adapter.dev, "Successful\n");
+		}
+	}
+
+	/* Turn off timeout interrupts, set fast host clock */
+	sis96x_write(SMB_CNT, 0x20);
+
+	/* clear all (sticky) status flags */
+	temp = sis96x_read(SMB_STS);
+	sis96x_write(SMB_STS, temp & 0x1e);
+
+	/* start the transaction by setting bit 4 and size bits */
+	sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07));
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis96x_read(SMB_STS);
+	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
+		result = -ETIMEDOUT;
+	}
+
+	/* device error - probably missing ACK */
+	if (temp & 0x02) {
+		dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
+		result = -ENXIO;
+	}
+
+	/* bus collision */
+	if (temp & 0x04) {
+		dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
+		result = -EIO;
+	}
+
+	/* Finish up by resetting the bus */
+	sis96x_write(SMB_STS, temp);
+	if ((temp = sis96x_read(SMB_STS))) {
+		dev_dbg(&sis96x_adapter.dev, "Failed reset at "
+			"end of transaction! (0x%02x)\n", temp);
+	}
+
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
+			 unsigned short flags, char read_write,
+			 u8 command, int size, union i2c_smbus_data * data)
+{
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS96x_QUICK;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_CMD, command);
+		size = SIS96x_BYTE;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_BYTE, data->byte);
+		size = SIS96x_BYTE_DATA;
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis96x_write(SMB_BYTE, data->word & 0xff);
+			sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL ? 
+			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
+		break;
+
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	status = sis96x_transaction(size);
+	if (status)
+		return status;
+
+	if ((size != SIS96x_PROC_CALL) &&
+		((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
+		return 0;
+
+	switch (size) {
+	case SIS96x_BYTE:
+	case SIS96x_BYTE_DATA:
+		data->byte = sis96x_read(SMB_BYTE);
+		break;
+
+	case SIS96x_WORD_DATA:
+	case SIS96x_PROC_CALL:
+		data->word = sis96x_read(SMB_BYTE) +
+				(sis96x_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+	return 0;
+}
+
+static u32 sis96x_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sis96x_access,
+	.functionality	= sis96x_func,
+};
+
+static struct i2c_adapter sis96x_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static const struct pci_device_id sis96x_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis96x_ids);
+
+static int sis96x_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	u16 ww = 0;
+	int retval;
+
+	if (sis96x_smbus_base) {
+		dev_err(&dev->dev, "Only one device supported.\n");
+		return -EBUSY;
+	}
+
+	pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
+	if (PCI_CLASS_SERIAL_SMBUS != ww) {
+		dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
+		return -ENODEV;
+	}
+
+	sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
+	if (!sis96x_smbus_base) {
+		dev_err(&dev->dev, "SiS96x SMBus base address "
+			"not initialized!\n");
+		return -EINVAL;
+	}
+	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
+			sis96x_smbus_base);
+
+	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
+	if (retval)
+		return -ENODEV;
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+			    sis96x_driver.name)) {
+		dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
+			"already in use!\n", sis96x_smbus_base,
+			sis96x_smbus_base + SMB_IOSIZE - 1);
+
+		sis96x_smbus_base = 0;
+		return -EINVAL;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	sis96x_adapter.dev.parent = &dev->dev;
+
+	snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name),
+		"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);
+
+	if ((retval = i2c_add_adapter(&sis96x_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+
+	return retval;
+}
+
+static void sis96x_remove(struct pci_dev *dev)
+{
+	if (sis96x_smbus_base) {
+		i2c_del_adapter(&sis96x_adapter);
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+}
+
+static struct pci_driver sis96x_driver = {
+	.name		= "sis96x_smbus",
+	.id_table	= sis96x_ids,
+	.probe		= sis96x_probe,
+	.remove		= sis96x_remove,
+};
+
+module_pci_driver(sis96x_driver);
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("SiS96x SMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sprd.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sprd.c
new file mode 100644
index 0000000..4053259
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sprd.c
@@ -0,0 +1,661 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define I2C_CTL			0x00
+#define I2C_ADDR_CFG		0x04
+#define I2C_COUNT		0x08
+#define I2C_RX			0x0c
+#define I2C_TX			0x10
+#define I2C_STATUS		0x14
+#define I2C_HSMODE_CFG		0x18
+#define I2C_VERSION		0x1c
+#define ADDR_DVD0		0x20
+#define ADDR_DVD1		0x24
+#define ADDR_STA0_DVD		0x28
+#define ADDR_RST		0x2c
+
+/* I2C_CTL */
+#define STP_EN			BIT(20)
+#define FIFO_AF_LVL_MASK	GENMASK(19, 16)
+#define FIFO_AF_LVL		16
+#define FIFO_AE_LVL_MASK	GENMASK(15, 12)
+#define FIFO_AE_LVL		12
+#define I2C_DMA_EN		BIT(11)
+#define FULL_INTEN		BIT(10)
+#define EMPTY_INTEN		BIT(9)
+#define I2C_DVD_OPT		BIT(8)
+#define I2C_OUT_OPT		BIT(7)
+#define I2C_TRIM_OPT		BIT(6)
+#define I2C_HS_MODE		BIT(4)
+#define I2C_MODE		BIT(3)
+#define I2C_EN			BIT(2)
+#define I2C_INT_EN		BIT(1)
+#define I2C_START		BIT(0)
+
+/* I2C_STATUS */
+#define SDA_IN			BIT(21)
+#define SCL_IN			BIT(20)
+#define FIFO_FULL		BIT(4)
+#define FIFO_EMPTY		BIT(3)
+#define I2C_INT			BIT(2)
+#define I2C_RX_ACK		BIT(1)
+#define I2C_BUSY		BIT(0)
+
+/* ADDR_RST */
+#define I2C_RST			BIT(0)
+
+#define I2C_FIFO_DEEP		12
+#define I2C_FIFO_FULL_THLD	15
+#define I2C_FIFO_EMPTY_THLD	4
+#define I2C_DATA_STEP		8
+#define I2C_ADDR_DVD0_CALC(high, low)	\
+	((((high) & GENMASK(15, 0)) << 16) | ((low) & GENMASK(15, 0)))
+#define I2C_ADDR_DVD1_CALC(high, low)	\
+	(((high) & GENMASK(31, 16)) | (((low) & GENMASK(31, 16)) >> 16))
+
+/* timeout (ms) for pm runtime autosuspend */
+#define SPRD_I2C_PM_TIMEOUT	1000
+
+/* SPRD i2c data structure */
+struct sprd_i2c {
+	struct i2c_adapter adap;
+	struct device *dev;
+	void __iomem *base;
+	struct i2c_msg *msg;
+	struct clk *clk;
+	u32 src_clk;
+	u32 bus_freq;
+	struct completion complete;
+	u8 *buf;
+	u32 count;
+	int irq;
+	int err;
+	bool is_suspended;
+};
+
+static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count)
+{
+	writel(count, i2c_dev->base + I2C_COUNT);
+}
+
+static void sprd_i2c_send_stop(struct sprd_i2c *i2c_dev, int stop)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	if (stop)
+		writel(tmp & ~STP_EN, i2c_dev->base + I2C_CTL);
+	else
+		writel(tmp | STP_EN, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_clear_start(struct sprd_i2c *i2c_dev)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	writel(tmp & ~I2C_START, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_clear_ack(struct sprd_i2c *i2c_dev)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_STATUS);
+
+	writel(tmp & ~I2C_RX_ACK, i2c_dev->base + I2C_STATUS);
+}
+
+static void sprd_i2c_clear_irq(struct sprd_i2c *i2c_dev)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_STATUS);
+
+	writel(tmp & ~I2C_INT, i2c_dev->base + I2C_STATUS);
+}
+
+static void sprd_i2c_reset_fifo(struct sprd_i2c *i2c_dev)
+{
+	writel(I2C_RST, i2c_dev->base + ADDR_RST);
+}
+
+static void sprd_i2c_set_devaddr(struct sprd_i2c *i2c_dev, struct i2c_msg *m)
+{
+	writel(m->addr << 1, i2c_dev->base + I2C_ADDR_CFG);
+}
+
+static void sprd_i2c_write_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
+{
+	u32 i;
+
+	for (i = 0; i < len; i++)
+		writeb(buf[i], i2c_dev->base + I2C_TX);
+}
+
+static void sprd_i2c_read_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
+{
+	u32 i;
+
+	for (i = 0; i < len; i++)
+		buf[i] = readb(i2c_dev->base + I2C_RX);
+}
+
+static void sprd_i2c_set_full_thld(struct sprd_i2c *i2c_dev, u32 full_thld)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	tmp &= ~FIFO_AF_LVL_MASK;
+	tmp |= full_thld << FIFO_AF_LVL;
+	writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_empty_thld(struct sprd_i2c *i2c_dev, u32 empty_thld)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	tmp &= ~FIFO_AE_LVL_MASK;
+	tmp |= empty_thld << FIFO_AE_LVL;
+	writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_fifo_full_int(struct sprd_i2c *i2c_dev, int enable)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	if (enable)
+		tmp |= FULL_INTEN;
+	else
+		tmp &= ~FULL_INTEN;
+
+	writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_fifo_empty_int(struct sprd_i2c *i2c_dev, int enable)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	if (enable)
+		tmp |= EMPTY_INTEN;
+	else
+		tmp &= ~EMPTY_INTEN;
+
+	writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_opt_start(struct sprd_i2c *i2c_dev)
+{
+	u32 tmp = readl(i2c_dev->base + I2C_CTL);
+
+	writel(tmp | I2C_START, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_opt_mode(struct sprd_i2c *i2c_dev, int rw)
+{
+	u32 cmd = readl(i2c_dev->base + I2C_CTL) & ~I2C_MODE;
+
+	writel(cmd | rw << 3, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_data_transfer(struct sprd_i2c *i2c_dev)
+{
+	u32 i2c_count = i2c_dev->count;
+	u32 need_tran = i2c_count <= I2C_FIFO_DEEP ? i2c_count : I2C_FIFO_DEEP;
+	struct i2c_msg *msg = i2c_dev->msg;
+
+	if (msg->flags & I2C_M_RD) {
+		sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, I2C_FIFO_FULL_THLD);
+		i2c_dev->count -= I2C_FIFO_FULL_THLD;
+		i2c_dev->buf += I2C_FIFO_FULL_THLD;
+
+		/*
+		 * If the read data count is larger than rx fifo full threshold,
+		 * we should enable the rx fifo full interrupt to read data
+		 * again.
+		 */
+		if (i2c_dev->count >= I2C_FIFO_FULL_THLD)
+			sprd_i2c_set_fifo_full_int(i2c_dev, 1);
+	} else {
+		sprd_i2c_write_bytes(i2c_dev, i2c_dev->buf, need_tran);
+		i2c_dev->buf += need_tran;
+		i2c_dev->count -= need_tran;
+
+		/*
+		 * If the write data count is arger than tx fifo depth which
+		 * means we can not write all data in one time, then we should
+		 * enable the tx fifo empty interrupt to write again.
+		 */
+		if (i2c_count > I2C_FIFO_DEEP)
+			sprd_i2c_set_fifo_empty_int(i2c_dev, 1);
+	}
+}
+
+static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
+			       struct i2c_msg *msg, bool is_last_msg)
+{
+	struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
+
+	i2c_dev->msg = msg;
+	i2c_dev->buf = msg->buf;
+	i2c_dev->count = msg->len;
+
+	reinit_completion(&i2c_dev->complete);
+	sprd_i2c_reset_fifo(i2c_dev);
+	sprd_i2c_set_devaddr(i2c_dev, msg);
+	sprd_i2c_set_count(i2c_dev, msg->len);
+
+	if (msg->flags & I2C_M_RD) {
+		sprd_i2c_opt_mode(i2c_dev, 1);
+		sprd_i2c_send_stop(i2c_dev, 1);
+	} else {
+		sprd_i2c_opt_mode(i2c_dev, 0);
+		sprd_i2c_send_stop(i2c_dev, !!is_last_msg);
+	}
+
+	/*
+	 * We should enable rx fifo full interrupt to get data when receiving
+	 * full data.
+	 */
+	if (msg->flags & I2C_M_RD)
+		sprd_i2c_set_fifo_full_int(i2c_dev, 1);
+	else
+		sprd_i2c_data_transfer(i2c_dev);
+
+	sprd_i2c_opt_start(i2c_dev);
+
+	wait_for_completion(&i2c_dev->complete);
+
+	return i2c_dev->err;
+}
+
+static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
+				struct i2c_msg *msgs, int num)
+{
+	struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
+	int im, ret;
+
+	if (i2c_dev->is_suspended)
+		return -EBUSY;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		return ret;
+
+	for (im = 0; im < num - 1; im++) {
+		ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im], 0);
+		if (ret)
+			goto err_msg;
+	}
+
+	ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im++], 1);
+
+err_msg:
+	pm_runtime_mark_last_busy(i2c_dev->dev);
+	pm_runtime_put_autosuspend(i2c_dev->dev);
+
+	return ret < 0 ? ret : im;
+}
+
+static u32 sprd_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm sprd_i2c_algo = {
+	.master_xfer = sprd_i2c_master_xfer,
+	.functionality = sprd_i2c_func,
+};
+
+static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
+{
+	u32 apb_clk = i2c_dev->src_clk;
+	/*
+	 * From I2C databook, the prescale calculation formula:
+	 * prescale = freq_i2c / (4 * freq_scl) - 1;
+	 */
+	u32 i2c_dvd = apb_clk / (4 * freq) - 1;
+	/*
+	 * From I2C databook, the high period of SCL clock is recommended as
+	 * 40% (2/5), and the low period of SCL clock is recommended as 60%
+	 * (3/5), then the formula should be:
+	 * high = (prescale * 2 * 2) / 5
+	 * low = (prescale * 2 * 3) / 5
+	 */
+	u32 high = ((i2c_dvd << 1) * 2) / 5;
+	u32 low = ((i2c_dvd << 1) * 3) / 5;
+	u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
+	u32 div1 = I2C_ADDR_DVD1_CALC(high, low);
+
+	writel(div0, i2c_dev->base + ADDR_DVD0);
+	writel(div1, i2c_dev->base + ADDR_DVD1);
+
+	/* Start hold timing = hold time(us) * source clock */
+	if (freq == 400000)
+		writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
+	else if (freq == 100000)
+		writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
+}
+
+static void sprd_i2c_enable(struct sprd_i2c *i2c_dev)
+{
+	u32 tmp = I2C_DVD_OPT;
+
+	writel(tmp, i2c_dev->base + I2C_CTL);
+
+	sprd_i2c_set_full_thld(i2c_dev, I2C_FIFO_FULL_THLD);
+	sprd_i2c_set_empty_thld(i2c_dev, I2C_FIFO_EMPTY_THLD);
+
+	sprd_i2c_set_clk(i2c_dev, i2c_dev->bus_freq);
+	sprd_i2c_reset_fifo(i2c_dev);
+	sprd_i2c_clear_irq(i2c_dev);
+
+	tmp = readl(i2c_dev->base + I2C_CTL);
+	writel(tmp | I2C_EN | I2C_INT_EN, i2c_dev->base + I2C_CTL);
+}
+
+static irqreturn_t sprd_i2c_isr_thread(int irq, void *dev_id)
+{
+	struct sprd_i2c *i2c_dev = dev_id;
+	struct i2c_msg *msg = i2c_dev->msg;
+	bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
+	u32 i2c_tran;
+
+	if (msg->flags & I2C_M_RD)
+		i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
+	else
+		i2c_tran = i2c_dev->count;
+
+	/*
+	 * If we got one ACK from slave when writing data, and we did not
+	 * finish this transmission (i2c_tran is not zero), then we should
+	 * continue to write data.
+	 *
+	 * For reading data, ack is always true, if i2c_tran is not 0 which
+	 * means we still need to contine to read data from slave.
+	 */
+	if (i2c_tran && ack) {
+		sprd_i2c_data_transfer(i2c_dev);
+		return IRQ_HANDLED;
+	}
+
+	i2c_dev->err = 0;
+
+	/*
+	 * If we did not get one ACK from slave when writing data, we should
+	 * return -EIO to notify users.
+	 */
+	if (!ack)
+		i2c_dev->err = -EIO;
+	else if (msg->flags & I2C_M_RD && i2c_dev->count)
+		sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, i2c_dev->count);
+
+	/* Transmission is done and clear ack and start operation */
+	sprd_i2c_clear_ack(i2c_dev);
+	sprd_i2c_clear_start(i2c_dev);
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
+{
+	struct sprd_i2c *i2c_dev = dev_id;
+	struct i2c_msg *msg = i2c_dev->msg;
+	bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
+	u32 i2c_tran;
+
+	if (msg->flags & I2C_M_RD)
+		i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
+	else
+		i2c_tran = i2c_dev->count;
+
+	/*
+	 * If we did not get one ACK from slave when writing data, then we
+	 * should finish this transmission since we got some errors.
+	 *
+	 * When writing data, if i2c_tran == 0 which means we have writen
+	 * done all data, then we can finish this transmission.
+	 *
+	 * When reading data, if conut < rx fifo full threshold, which
+	 * means we can read all data in one time, then we can finish this
+	 * transmission too.
+	 */
+	if (!i2c_tran || !ack) {
+		sprd_i2c_clear_start(i2c_dev);
+		sprd_i2c_clear_irq(i2c_dev);
+	}
+
+	sprd_i2c_set_fifo_empty_int(i2c_dev, 0);
+	sprd_i2c_set_fifo_full_int(i2c_dev, 0);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev)
+{
+	struct clk *clk_i2c, *clk_parent;
+
+	clk_i2c = devm_clk_get(i2c_dev->dev, "i2c");
+	if (IS_ERR(clk_i2c)) {
+		dev_warn(i2c_dev->dev, "i2c%d can't get the i2c clock\n",
+			 i2c_dev->adap.nr);
+		clk_i2c = NULL;
+	}
+
+	clk_parent = devm_clk_get(i2c_dev->dev, "source");
+	if (IS_ERR(clk_parent)) {
+		dev_warn(i2c_dev->dev, "i2c%d can't get the source clock\n",
+			 i2c_dev->adap.nr);
+		clk_parent = NULL;
+	}
+
+	if (clk_set_parent(clk_i2c, clk_parent))
+		i2c_dev->src_clk = clk_get_rate(clk_i2c);
+	else
+		i2c_dev->src_clk = 26000000;
+
+	dev_dbg(i2c_dev->dev, "i2c%d set source clock is %d\n",
+		i2c_dev->adap.nr, i2c_dev->src_clk);
+
+	i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable");
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_warn(i2c_dev->dev, "i2c%d can't get the enable clock\n",
+			 i2c_dev->adap.nr);
+		i2c_dev->clk = NULL;
+	}
+
+	return 0;
+}
+
+static int sprd_i2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sprd_i2c *i2c_dev;
+	struct resource *res;
+	u32 prop;
+	int ret;
+
+	pdev->id = of_alias_get_id(dev->of_node, "i2c");
+
+	i2c_dev = devm_kzalloc(dev, sizeof(struct sprd_i2c), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = platform_get_irq(pdev, 0);
+	if (i2c_dev->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq resource\n");
+		return i2c_dev->irq;
+	}
+
+	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
+	init_completion(&i2c_dev->complete);
+	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
+		 "%s", "sprd-i2c");
+
+	i2c_dev->bus_freq = 100000;
+	i2c_dev->adap.owner = THIS_MODULE;
+	i2c_dev->dev = dev;
+	i2c_dev->adap.retries = 3;
+	i2c_dev->adap.algo = &sprd_i2c_algo;
+	i2c_dev->adap.algo_data = i2c_dev;
+	i2c_dev->adap.dev.parent = dev;
+	i2c_dev->adap.nr = pdev->id;
+	i2c_dev->adap.dev.of_node = dev->of_node;
+
+	if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop))
+		i2c_dev->bus_freq = prop;
+
+	/* We only support 100k and 400k now, otherwise will return error. */
+	if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
+		return -EINVAL;
+
+	sprd_i2c_clk_init(i2c_dev);
+	platform_set_drvdata(pdev, i2c_dev);
+
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret)
+		return ret;
+
+	sprd_i2c_enable(i2c_dev);
+
+	pm_runtime_set_autosuspend_delay(i2c_dev->dev, SPRD_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(i2c_dev->dev);
+	pm_runtime_set_active(i2c_dev->dev);
+	pm_runtime_enable(i2c_dev->dev);
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		goto err_rpm_put;
+
+	ret = devm_request_threaded_irq(dev, i2c_dev->irq,
+		sprd_i2c_isr, sprd_i2c_isr_thread,
+		IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq %d\n", i2c_dev->irq);
+		goto err_rpm_put;
+	}
+
+	ret = i2c_add_numbered_adapter(&i2c_dev->adap);
+	if (ret) {
+		dev_err(&pdev->dev, "add adapter failed\n");
+		goto err_rpm_put;
+	}
+
+	pm_runtime_mark_last_busy(i2c_dev->dev);
+	pm_runtime_put_autosuspend(i2c_dev->dev);
+	return 0;
+
+err_rpm_put:
+	pm_runtime_put_noidle(i2c_dev->dev);
+	pm_runtime_disable(i2c_dev->dev);
+	clk_disable_unprepare(i2c_dev->clk);
+	return ret;
+}
+
+static int sprd_i2c_remove(struct platform_device *pdev)
+{
+	struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		return ret;
+
+	i2c_del_adapter(&i2c_dev->adap);
+	clk_disable_unprepare(i2c_dev->clk);
+
+	pm_runtime_put_noidle(i2c_dev->dev);
+	pm_runtime_disable(i2c_dev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused sprd_i2c_suspend_noirq(struct device *pdev)
+{
+	struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+
+	i2c_lock_adapter(&i2c_dev->adap);
+	i2c_dev->is_suspended = true;
+	i2c_unlock_adapter(&i2c_dev->adap);
+
+	return pm_runtime_force_suspend(pdev);
+}
+
+static int __maybe_unused sprd_i2c_resume_noirq(struct device *pdev)
+{
+	struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+
+	i2c_lock_adapter(&i2c_dev->adap);
+	i2c_dev->is_suspended = false;
+	i2c_unlock_adapter(&i2c_dev->adap);
+
+	return pm_runtime_force_resume(pdev);
+}
+
+static int __maybe_unused sprd_i2c_runtime_suspend(struct device *pdev)
+{
+	struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2c_dev->clk);
+
+	return 0;
+}
+
+static int __maybe_unused sprd_i2c_runtime_resume(struct device *pdev)
+{
+	struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret)
+		return ret;
+
+	sprd_i2c_enable(i2c_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops sprd_i2c_pm_ops = {
+	SET_RUNTIME_PM_OPS(sprd_i2c_runtime_suspend,
+			   sprd_i2c_runtime_resume, NULL)
+
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sprd_i2c_suspend_noirq,
+				      sprd_i2c_resume_noirq)
+};
+
+static const struct of_device_id sprd_i2c_of_match[] = {
+	{ .compatible = "sprd,sc9860-i2c", },
+	{},
+};
+
+static struct platform_driver sprd_i2c_driver = {
+	.probe = sprd_i2c_probe,
+	.remove = sprd_i2c_remove,
+	.driver = {
+		   .name = "sprd-i2c",
+		   .of_match_table = sprd_i2c_of_match,
+		   .pm = &sprd_i2c_pm_ops,
+	},
+};
+
+static int sprd_i2c_init(void)
+{
+	return platform_driver_register(&sprd_i2c_driver);
+}
+arch_initcall_sync(sprd_i2c_init);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-st.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-st.c
new file mode 100644
index 0000000..81158ae
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-st.c
@@ -0,0 +1,917 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics
+ *
+ * I2C master mode controller driver, used in STMicroelectronics devices.
+ *
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+
+/* SSC registers */
+#define SSC_BRG				0x000
+#define SSC_TBUF			0x004
+#define SSC_RBUF			0x008
+#define SSC_CTL				0x00C
+#define SSC_IEN				0x010
+#define SSC_STA				0x014
+#define SSC_I2C				0x018
+#define SSC_SLAD			0x01C
+#define SSC_REP_START_HOLD		0x020
+#define SSC_START_HOLD			0x024
+#define SSC_REP_START_SETUP		0x028
+#define SSC_DATA_SETUP			0x02C
+#define SSC_STOP_SETUP			0x030
+#define SSC_BUS_FREE			0x034
+#define SSC_TX_FSTAT			0x038
+#define SSC_RX_FSTAT			0x03C
+#define SSC_PRE_SCALER_BRG		0x040
+#define SSC_CLR				0x080
+#define SSC_NOISE_SUPP_WIDTH		0x100
+#define SSC_PRSCALER			0x104
+#define SSC_NOISE_SUPP_WIDTH_DATAOUT	0x108
+#define SSC_PRSCALER_DATAOUT		0x10c
+
+/* SSC Control */
+#define SSC_CTL_DATA_WIDTH_9		0x8
+#define SSC_CTL_DATA_WIDTH_MSK		0xf
+#define SSC_CTL_BM			0xf
+#define SSC_CTL_HB			BIT(4)
+#define SSC_CTL_PH			BIT(5)
+#define SSC_CTL_PO			BIT(6)
+#define SSC_CTL_SR			BIT(7)
+#define SSC_CTL_MS			BIT(8)
+#define SSC_CTL_EN			BIT(9)
+#define SSC_CTL_LPB			BIT(10)
+#define SSC_CTL_EN_TX_FIFO		BIT(11)
+#define SSC_CTL_EN_RX_FIFO		BIT(12)
+#define SSC_CTL_EN_CLST_RX		BIT(13)
+
+/* SSC Interrupt Enable */
+#define SSC_IEN_RIEN			BIT(0)
+#define SSC_IEN_TIEN			BIT(1)
+#define SSC_IEN_TEEN			BIT(2)
+#define SSC_IEN_REEN			BIT(3)
+#define SSC_IEN_PEEN			BIT(4)
+#define SSC_IEN_AASEN			BIT(6)
+#define SSC_IEN_STOPEN			BIT(7)
+#define SSC_IEN_ARBLEN			BIT(8)
+#define SSC_IEN_NACKEN			BIT(10)
+#define SSC_IEN_REPSTRTEN		BIT(11)
+#define SSC_IEN_TX_FIFO_HALF		BIT(12)
+#define SSC_IEN_RX_FIFO_HALF_FULL	BIT(14)
+
+/* SSC Status */
+#define SSC_STA_RIR			BIT(0)
+#define SSC_STA_TIR			BIT(1)
+#define SSC_STA_TE			BIT(2)
+#define SSC_STA_RE			BIT(3)
+#define SSC_STA_PE			BIT(4)
+#define SSC_STA_CLST			BIT(5)
+#define SSC_STA_AAS			BIT(6)
+#define SSC_STA_STOP			BIT(7)
+#define SSC_STA_ARBL			BIT(8)
+#define SSC_STA_BUSY			BIT(9)
+#define SSC_STA_NACK			BIT(10)
+#define SSC_STA_REPSTRT			BIT(11)
+#define SSC_STA_TX_FIFO_HALF		BIT(12)
+#define SSC_STA_TX_FIFO_FULL		BIT(13)
+#define SSC_STA_RX_FIFO_HALF		BIT(14)
+
+/* SSC I2C Control */
+#define SSC_I2C_I2CM			BIT(0)
+#define SSC_I2C_STRTG			BIT(1)
+#define SSC_I2C_STOPG			BIT(2)
+#define SSC_I2C_ACKG			BIT(3)
+#define SSC_I2C_AD10			BIT(4)
+#define SSC_I2C_TXENB			BIT(5)
+#define SSC_I2C_REPSTRTG		BIT(11)
+#define SSC_I2C_SLAVE_DISABLE		BIT(12)
+
+/* SSC Tx FIFO Status */
+#define SSC_TX_FSTAT_STATUS		0x07
+
+/* SSC Rx FIFO Status */
+#define SSC_RX_FSTAT_STATUS		0x07
+
+/* SSC Clear bit operation */
+#define SSC_CLR_SSCAAS			BIT(6)
+#define SSC_CLR_SSCSTOP			BIT(7)
+#define SSC_CLR_SSCARBL			BIT(8)
+#define SSC_CLR_NACK			BIT(10)
+#define SSC_CLR_REPSTRT			BIT(11)
+
+/* SSC Clock Prescaler */
+#define SSC_PRSC_VALUE			0x0f
+
+
+#define SSC_TXFIFO_SIZE			0x8
+#define SSC_RXFIFO_SIZE			0x8
+
+enum st_i2c_mode {
+	I2C_MODE_STANDARD,
+	I2C_MODE_FAST,
+	I2C_MODE_END,
+};
+
+/**
+ * struct st_i2c_timings - per-Mode tuning parameters
+ * @rate: I2C bus rate
+ * @rep_start_hold: I2C repeated start hold time requirement
+ * @rep_start_setup: I2C repeated start set up time requirement
+ * @start_hold: I2C start hold time requirement
+ * @data_setup_time: I2C data set up time requirement
+ * @stop_setup_time: I2C stop set up time requirement
+ * @bus_free_time: I2C bus free time requirement
+ * @sda_pulse_min_limit: I2C SDA pulse mini width limit
+ */
+struct st_i2c_timings {
+	u32 rate;
+	u32 rep_start_hold;
+	u32 rep_start_setup;
+	u32 start_hold;
+	u32 data_setup_time;
+	u32 stop_setup_time;
+	u32 bus_free_time;
+	u32 sda_pulse_min_limit;
+};
+
+/**
+ * struct st_i2c_client - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transfered
+ * @xfered: number of bytes already transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct st_i2c_client {
+	u8	addr;
+	u32	count;
+	u32	xfered;
+	u8	*buf;
+	int	result;
+	bool	stop;
+};
+
+/**
+ * struct st_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @irq: interrupt line for th controller
+ * @clk: hw ssc block clock
+ * @mode: I2C mode of the controller. Standard or Fast only supported
+ * @scl_min_width_us: SCL line minimum pulse width in us
+ * @sda_min_width_us: SDA line minimum pulse width in us
+ * @client: I2C transfert information
+ * @busy: I2C transfer on-going
+ */
+struct st_i2c_dev {
+	struct i2c_adapter	adap;
+	struct device		*dev;
+	void __iomem		*base;
+	struct completion	complete;
+	int			irq;
+	struct clk		*clk;
+	int			mode;
+	u32			scl_min_width_us;
+	u32			sda_min_width_us;
+	struct st_i2c_client	client;
+	bool			busy;
+};
+
+static inline void st_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+/*
+ * From I2C Specifications v0.5.
+ *
+ * All the values below have +10% margin added to be
+ * compatible with some out-of-spec devices,
+ * like HDMI link of the Toshiba 19AV600 TV.
+ */
+static struct st_i2c_timings i2c_timings[] = {
+	[I2C_MODE_STANDARD] = {
+		.rate			= 100000,
+		.rep_start_hold		= 4400,
+		.rep_start_setup	= 5170,
+		.start_hold		= 4400,
+		.data_setup_time	= 275,
+		.stop_setup_time	= 4400,
+		.bus_free_time		= 5170,
+	},
+	[I2C_MODE_FAST] = {
+		.rate			= 400000,
+		.rep_start_hold		= 660,
+		.rep_start_setup	= 660,
+		.start_hold		= 660,
+		.data_setup_time	= 110,
+		.stop_setup_time	= 660,
+		.bus_free_time		= 1430,
+	},
+};
+
+static void st_i2c_flush_rx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	int count, i;
+
+	/*
+	 * Counter only counts up to 7 but fifo size is 8...
+	 * When fifo is full, counter is 0 and RIR bit of status register is
+	 * set
+	 */
+	if (readl_relaxed(i2c_dev->base + SSC_STA) & SSC_STA_RIR)
+		count = SSC_RXFIFO_SIZE;
+	else
+		count = readl_relaxed(i2c_dev->base + SSC_RX_FSTAT) &
+			SSC_RX_FSTAT_STATUS;
+
+	for (i = 0; i < count; i++)
+		readl_relaxed(i2c_dev->base + SSC_RBUF);
+}
+
+static void st_i2c_soft_reset(struct st_i2c_dev *i2c_dev)
+{
+	/*
+	 * FIFO needs to be emptied before reseting the IP,
+	 * else the controller raises a BUSY error.
+	 */
+	st_i2c_flush_rx_fifo(i2c_dev);
+
+	st_i2c_set_bits(i2c_dev->base + SSC_CTL, SSC_CTL_SR);
+	st_i2c_clr_bits(i2c_dev->base + SSC_CTL, SSC_CTL_SR);
+}
+
+/**
+ * st_i2c_hw_config() - Prepare SSC block, calculate and apply tuning timings
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_hw_config(struct st_i2c_dev *i2c_dev)
+{
+	unsigned long rate;
+	u32 val, ns_per_clk;
+	struct st_i2c_timings *t = &i2c_timings[i2c_dev->mode];
+
+	st_i2c_soft_reset(i2c_dev);
+
+	val = SSC_CLR_REPSTRT | SSC_CLR_NACK | SSC_CLR_SSCARBL |
+		SSC_CLR_SSCAAS | SSC_CLR_SSCSTOP;
+	writel_relaxed(val, i2c_dev->base + SSC_CLR);
+
+	/* SSC Control register setup */
+	val = SSC_CTL_PO | SSC_CTL_PH | SSC_CTL_HB | SSC_CTL_DATA_WIDTH_9;
+	writel_relaxed(val, i2c_dev->base + SSC_CTL);
+
+	rate = clk_get_rate(i2c_dev->clk);
+	ns_per_clk = 1000000000 / rate;
+
+	/* Baudrate */
+	val = rate / (2 * t->rate);
+	writel_relaxed(val, i2c_dev->base + SSC_BRG);
+
+	/* Pre-scaler baudrate */
+	writel_relaxed(1, i2c_dev->base + SSC_PRE_SCALER_BRG);
+
+	/* Enable I2C mode */
+	writel_relaxed(SSC_I2C_I2CM, i2c_dev->base + SSC_I2C);
+
+	/* Repeated start hold time */
+	val = t->rep_start_hold / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_REP_START_HOLD);
+
+	/* Repeated start set up time */
+	val = t->rep_start_setup / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_REP_START_SETUP);
+
+	/* Start hold time */
+	val = t->start_hold / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_START_HOLD);
+
+	/* Data set up time */
+	val = t->data_setup_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_DATA_SETUP);
+
+	/* Stop set up time */
+	val = t->stop_setup_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_STOP_SETUP);
+
+	/* Bus free time */
+	val = t->bus_free_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_BUS_FREE);
+
+	/* Prescalers set up */
+	val = rate / 10000000;
+	writel_relaxed(val, i2c_dev->base + SSC_PRSCALER);
+	writel_relaxed(val, i2c_dev->base + SSC_PRSCALER_DATAOUT);
+
+	/* Noise suppression witdh */
+	val = i2c_dev->scl_min_width_us * rate / 100000000;
+	writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH);
+
+	/* Noise suppression max output data delay width */
+	val = i2c_dev->sda_min_width_us * rate / 100000000;
+	writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH_DATAOUT);
+}
+
+static int st_i2c_recover_bus(struct i2c_adapter *i2c_adap)
+{
+	struct st_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+	u32 ctl;
+
+	dev_dbg(i2c_dev->dev, "Trying to recover bus\n");
+
+	/*
+	 * SSP IP is dual role SPI/I2C to generate 9 clock pulses
+	 * we switch to SPI node, 9 bit words and write a 0. This
+	 * has been validate with a oscilloscope and is easier
+	 * than switching to GPIO mode.
+	 */
+
+	/* Disable interrupts */
+	writel_relaxed(0, i2c_dev->base + SSC_IEN);
+
+	st_i2c_hw_config(i2c_dev);
+
+	ctl = SSC_CTL_EN | SSC_CTL_MS |	SSC_CTL_EN_RX_FIFO | SSC_CTL_EN_TX_FIFO;
+	st_i2c_set_bits(i2c_dev->base + SSC_CTL, ctl);
+
+	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM);
+	usleep_range(8000, 10000);
+
+	writel_relaxed(0, i2c_dev->base + SSC_TBUF);
+	usleep_range(2000, 4000);
+	st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM);
+
+	return 0;
+}
+
+static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev)
+{
+	u32 sta;
+	int i, ret;
+
+	for (i = 0; i < 10; i++) {
+		sta = readl_relaxed(i2c_dev->base + SSC_STA);
+		if (!(sta & SSC_STA_BUSY))
+			return 0;
+
+		usleep_range(2000, 4000);
+	}
+
+	dev_err(i2c_dev->dev, "bus not free (status = 0x%08x)\n", sta);
+
+	ret = i2c_recover_bus(&i2c_dev->adap);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret);
+		return ret;
+	}
+
+	return -EBUSY;
+}
+
+/**
+ * st_i2c_write_tx_fifo() - Write a byte in the Tx FIFO
+ * @i2c_dev: Controller's private data
+ * @byte: Data to write in the Tx FIFO
+ */
+static inline void st_i2c_write_tx_fifo(struct st_i2c_dev *i2c_dev, u8 byte)
+{
+	u16 tbuf = byte << 1;
+
+	writel_relaxed(tbuf | 1, i2c_dev->base + SSC_TBUF);
+}
+
+/**
+ * st_i2c_wr_fill_tx_fifo() - Fill the Tx FIFO in write mode
+ * @i2c_dev: Controller's private data
+ *
+ * This functions fills the Tx FIFO with I2C transfert buffer when
+ * in write mode.
+ */
+static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 tx_fstat, sta;
+	int i;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_TX_FIFO_FULL)
+		return;
+
+	tx_fstat = readl_relaxed(i2c_dev->base + SSC_TX_FSTAT);
+	tx_fstat &= SSC_TX_FSTAT_STATUS;
+
+	if (c->count < (SSC_TXFIFO_SIZE - tx_fstat))
+		i = c->count;
+	else
+		i = SSC_TXFIFO_SIZE - tx_fstat;
+
+	for (; i > 0; i--, c->count--, c->buf++)
+		st_i2c_write_tx_fifo(i2c_dev, *c->buf);
+}
+
+/**
+ * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode
+ * @i2c_dev: Controller's private data
+ * @max: Maximum amount of data to fill into the Tx FIFO
+ *
+ * This functions fills the Tx FIFO with fixed pattern when
+ * in read mode to trigger clock.
+ */
+static void st_i2c_rd_fill_tx_fifo(struct st_i2c_dev *i2c_dev, int max)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 tx_fstat, sta;
+	int i;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_TX_FIFO_FULL)
+		return;
+
+	tx_fstat = readl_relaxed(i2c_dev->base + SSC_TX_FSTAT);
+	tx_fstat &= SSC_TX_FSTAT_STATUS;
+
+	if (max < (SSC_TXFIFO_SIZE - tx_fstat))
+		i = max;
+	else
+		i = SSC_TXFIFO_SIZE - tx_fstat;
+
+	for (; i > 0; i--, c->xfered++)
+		st_i2c_write_tx_fifo(i2c_dev, 0xff);
+}
+
+static void st_i2c_read_rx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 i, sta;
+	u16 rbuf;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_RIR) {
+		i = SSC_RXFIFO_SIZE;
+	} else {
+		i = readl_relaxed(i2c_dev->base + SSC_RX_FSTAT);
+		i &= SSC_RX_FSTAT_STATUS;
+	}
+
+	for (; (i > 0) && (c->count > 0); i--, c->count--) {
+		rbuf = readl_relaxed(i2c_dev->base + SSC_RBUF) >> 1;
+		*c->buf++ = (u8)rbuf & 0xff;
+	}
+
+	if (i) {
+		dev_err(i2c_dev->dev, "Unexpected %d bytes in rx fifo\n", i);
+		st_i2c_flush_rx_fifo(i2c_dev);
+	}
+}
+
+/**
+ * st_i2c_terminate_xfer() - Send either STOP or REPSTART condition
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_terminate_xfer(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+
+	st_i2c_clr_bits(i2c_dev->base + SSC_IEN, SSC_IEN_TEEN);
+	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
+
+	if (c->stop) {
+		st_i2c_set_bits(i2c_dev->base + SSC_IEN, SSC_IEN_STOPEN);
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+	} else {
+		st_i2c_set_bits(i2c_dev->base + SSC_IEN, SSC_IEN_REPSTRTEN);
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_REPSTRTG);
+	}
+}
+
+/**
+ * st_i2c_handle_write() - Handle FIFO empty interrupt in case of write
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_handle_write(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+
+	st_i2c_flush_rx_fifo(i2c_dev);
+
+	if (!c->count)
+		/* End of xfer, send stop or repstart */
+		st_i2c_terminate_xfer(i2c_dev);
+	else
+		st_i2c_wr_fill_tx_fifo(i2c_dev);
+}
+
+/**
+ * st_i2c_handle_write() - Handle FIFO enmpty interrupt in case of read
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 ien;
+
+	/* Trash the address read back */
+	if (!c->xfered) {
+		readl_relaxed(i2c_dev->base + SSC_RBUF);
+		st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_TXENB);
+	} else {
+		st_i2c_read_rx_fifo(i2c_dev);
+	}
+
+	if (!c->count) {
+		/* End of xfer, send stop or repstart */
+		st_i2c_terminate_xfer(i2c_dev);
+	} else if (c->count == 1) {
+		/* Penultimate byte to xfer, disable ACK gen. */
+		st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_ACKG);
+
+		/* Last received byte is to be handled by NACK interrupt */
+		ien = SSC_IEN_NACKEN | SSC_IEN_ARBLEN;
+		writel_relaxed(ien, i2c_dev->base + SSC_IEN);
+
+		st_i2c_rd_fill_tx_fifo(i2c_dev, c->count);
+	} else {
+		st_i2c_rd_fill_tx_fifo(i2c_dev, c->count - 1);
+	}
+}
+
+/**
+ * st_i2c_isr() - Interrupt routine
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t st_i2c_isr_thread(int irq, void *data)
+{
+	struct st_i2c_dev *i2c_dev = data;
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 sta, ien;
+	int it;
+
+	ien = readl_relaxed(i2c_dev->base + SSC_IEN);
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+
+	/* Use __fls() to check error bits first */
+	it = __fls(sta & ien);
+	if (it < 0) {
+		dev_dbg(i2c_dev->dev, "spurious it (sta=0x%04x, ien=0x%04x)\n",
+				sta, ien);
+		return IRQ_NONE;
+	}
+
+	switch (1 << it) {
+	case SSC_STA_TE:
+		if (c->addr & I2C_M_RD)
+			st_i2c_handle_read(i2c_dev);
+		else
+			st_i2c_handle_write(i2c_dev);
+		break;
+
+	case SSC_STA_STOP:
+	case SSC_STA_REPSTRT:
+		writel_relaxed(0, i2c_dev->base + SSC_IEN);
+		complete(&i2c_dev->complete);
+		break;
+
+	case SSC_STA_NACK:
+		writel_relaxed(SSC_CLR_NACK, i2c_dev->base + SSC_CLR);
+
+		/* Last received byte handled by NACK interrupt */
+		if ((c->addr & I2C_M_RD) && (c->count == 1) && (c->xfered)) {
+			st_i2c_handle_read(i2c_dev);
+			break;
+		}
+
+		it = SSC_IEN_STOPEN | SSC_IEN_ARBLEN;
+		writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+		c->result = -EIO;
+		break;
+
+	case SSC_STA_ARBL:
+		writel_relaxed(SSC_CLR_SSCARBL, i2c_dev->base + SSC_CLR);
+
+		it = SSC_IEN_STOPEN | SSC_IEN_ARBLEN;
+		writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+		c->result = -EAGAIN;
+		break;
+
+	default:
+		dev_err(i2c_dev->dev,
+				"it %d unhandled (sta=0x%04x)\n", it, sta);
+	}
+
+	/*
+	 * Read IEN register to ensure interrupt mask write is effective
+	 * before re-enabling interrupt at GIC level, and thus avoid spurious
+	 * interrupts.
+	 */
+	readl(i2c_dev->base + SSC_IEN);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * st_i2c_xfer_msg() - Transfer a single I2C message
+ * @i2c_dev: Controller's private data
+ * @msg: I2C message to transfer
+ * @is_first: first message of the sequence
+ * @is_last: last message of the sequence
+ */
+static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
+			    bool is_first, bool is_last)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 ctl, i2c, it;
+	unsigned long timeout;
+	int ret;
+
+	c->addr		= i2c_8bit_addr_from_msg(msg);
+	c->buf		= msg->buf;
+	c->count	= msg->len;
+	c->xfered	= 0;
+	c->result	= 0;
+	c->stop		= is_last;
+
+	reinit_completion(&i2c_dev->complete);
+
+	ctl = SSC_CTL_EN | SSC_CTL_MS |	SSC_CTL_EN_RX_FIFO | SSC_CTL_EN_TX_FIFO;
+	st_i2c_set_bits(i2c_dev->base + SSC_CTL, ctl);
+
+	i2c = SSC_I2C_TXENB;
+	if (c->addr & I2C_M_RD)
+		i2c |= SSC_I2C_ACKG;
+	st_i2c_set_bits(i2c_dev->base + SSC_I2C, i2c);
+
+	/* Write slave address */
+	st_i2c_write_tx_fifo(i2c_dev, c->addr);
+
+	/* Pre-fill Tx fifo with data in case of write */
+	if (!(c->addr & I2C_M_RD))
+		st_i2c_wr_fill_tx_fifo(i2c_dev);
+
+	it = SSC_IEN_NACKEN | SSC_IEN_TEEN | SSC_IEN_ARBLEN;
+	writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+	if (is_first) {
+		ret = st_i2c_wait_free_bus(i2c_dev);
+		if (ret)
+			return ret;
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
+	}
+
+	timeout = wait_for_completion_timeout(&i2c_dev->complete,
+			i2c_dev->adap.timeout);
+	ret = c->result;
+
+	if (!timeout) {
+		dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
+				c->addr);
+		ret = -ETIMEDOUT;
+	}
+
+	i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
+	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
+
+	writel_relaxed(SSC_CLR_SSCSTOP | SSC_CLR_REPSTRT,
+			i2c_dev->base + SSC_CLR);
+
+	return ret;
+}
+
+/**
+ * st_i2c_xfer() - Transfer a single I2C message
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num: Number of messages to be executed
+ */
+static int st_i2c_xfer(struct i2c_adapter *i2c_adap,
+			struct i2c_msg msgs[], int num)
+{
+	struct st_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+	int ret, i;
+
+	i2c_dev->busy = true;
+
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(i2c_dev->dev);
+
+	st_i2c_hw_config(i2c_dev);
+
+	for (i = 0; (i < num) && !ret; i++)
+		ret = st_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0, i == num - 1);
+
+	pinctrl_pm_select_idle_state(i2c_dev->dev);
+
+	clk_disable_unprepare(i2c_dev->clk);
+
+	i2c_dev->busy = false;
+
+	return (ret < 0) ? ret : i;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_i2c_suspend(struct device *dev)
+{
+	struct st_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	if (i2c_dev->busy)
+		return -EBUSY;
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int st_i2c_resume(struct device *dev)
+{
+	pinctrl_pm_select_default_state(dev);
+	/* Go in idle state if available */
+	pinctrl_pm_select_idle_state(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_i2c_pm, st_i2c_suspend, st_i2c_resume);
+#define ST_I2C_PM	(&st_i2c_pm)
+#else
+#define ST_I2C_PM	NULL
+#endif
+
+static u32 st_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm st_i2c_algo = {
+	.master_xfer = st_i2c_xfer,
+	.functionality = st_i2c_func,
+};
+
+static struct i2c_bus_recovery_info st_i2c_recovery_info = {
+	.recover_bus = st_i2c_recover_bus,
+};
+
+static int st_i2c_of_get_deglitch(struct device_node *np,
+		struct st_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "st,i2c-min-scl-pulse-width-us",
+			&i2c_dev->scl_min_width_us);
+	if ((ret == -ENODATA) || (ret == -EOVERFLOW)) {
+		dev_err(i2c_dev->dev, "st,i2c-min-scl-pulse-width-us invalid\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "st,i2c-min-sda-pulse-width-us",
+			&i2c_dev->sda_min_width_us);
+	if ((ret == -ENODATA) || (ret == -EOVERFLOW)) {
+		dev_err(i2c_dev->dev, "st,i2c-min-sda-pulse-width-us invalid\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int st_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_i2c_dev *i2c_dev;
+	struct resource *res;
+	u32 clk_rate;
+	struct i2c_adapter *adap;
+	int ret;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = irq_of_parse_and_map(np, 0);
+	if (!i2c_dev->irq) {
+		dev_err(&pdev->dev, "IRQ missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = of_clk_get_by_name(np, "ssc");
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	i2c_dev->mode = I2C_MODE_STANDARD;
+	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if ((!ret) && (clk_rate == 400000))
+		i2c_dev->mode = I2C_MODE_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq,
+			NULL, st_i2c_isr_thread,
+			IRQF_ONESHOT, pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(i2c_dev->dev);
+	/* In case idle state available, select it */
+	pinctrl_pm_select_idle_state(i2c_dev->dev);
+
+	ret = st_i2c_of_get_deglitch(np, i2c_dev);
+	if (ret)
+		return ret;
+
+	adap = &i2c_dev->adap;
+	i2c_set_adapdata(adap, i2c_dev);
+	snprintf(adap->name, sizeof(adap->name), "ST I2C(%pa)", &res->start);
+	adap->owner = THIS_MODULE;
+	adap->timeout = 2 * HZ;
+	adap->retries = 0;
+	adap->algo = &st_i2c_algo;
+	adap->bus_recovery_info = &st_i2c_recovery_info;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	dev_info(i2c_dev->dev, "%s initialized\n", adap->name);
+
+	return 0;
+}
+
+static int st_i2c_remove(struct platform_device *pdev)
+{
+	struct st_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adap);
+
+	return 0;
+}
+
+static const struct of_device_id st_i2c_match[] = {
+	{ .compatible = "st,comms-ssc-i2c", },
+	{ .compatible = "st,comms-ssc4-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_i2c_match);
+
+static struct platform_driver st_i2c_driver = {
+	.driver = {
+		.name = "st-i2c",
+		.of_match_table = st_i2c_match,
+		.pm = ST_I2C_PM,
+	},
+	.probe = st_i2c_probe,
+	.remove = st_i2c_remove,
+};
+
+module_platform_driver(st_i2c_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32.h b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32.h
new file mode 100644
index 0000000..dab5176
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32.h
@@ -0,0 +1,20 @@
+/*
+ * i2c-stm32.h
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _I2C_STM32_H
+#define _I2C_STM32_H
+
+enum stm32_i2c_speed {
+	STM32_I2C_SPEED_STANDARD, /* 100 kHz */
+	STM32_I2C_SPEED_FAST, /* 400 kHz */
+	STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */
+	STM32_I2C_SPEED_END,
+};
+
+#endif /* _I2C_STM32_H */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f4.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f4.c
new file mode 100644
index 0000000..4ec1084
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f4.c
@@ -0,0 +1,893 @@
+/*
+ * Driver for STMicroelectronics STM32 I2C controller
+ *
+ * This I2C controller is described in the STM32F429/439 Soc reference manual.
+ * Please see below a link to the documentation:
+ * http://www.st.com/resource/en/reference_manual/DM00031020.pdf
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2016
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * This driver is based on i2c-st.c
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "i2c-stm32.h"
+
+/* STM32F4 I2C offset registers */
+#define STM32F4_I2C_CR1			0x00
+#define STM32F4_I2C_CR2			0x04
+#define STM32F4_I2C_DR			0x10
+#define STM32F4_I2C_SR1			0x14
+#define STM32F4_I2C_SR2			0x18
+#define STM32F4_I2C_CCR			0x1C
+#define STM32F4_I2C_TRISE		0x20
+#define STM32F4_I2C_FLTR		0x24
+
+/* STM32F4 I2C control 1*/
+#define STM32F4_I2C_CR1_POS		BIT(11)
+#define STM32F4_I2C_CR1_ACK		BIT(10)
+#define STM32F4_I2C_CR1_STOP		BIT(9)
+#define STM32F4_I2C_CR1_START		BIT(8)
+#define STM32F4_I2C_CR1_PE		BIT(0)
+
+/* STM32F4 I2C control 2 */
+#define STM32F4_I2C_CR2_FREQ_MASK	GENMASK(5, 0)
+#define STM32F4_I2C_CR2_FREQ(n)		((n) & STM32F4_I2C_CR2_FREQ_MASK)
+#define STM32F4_I2C_CR2_ITBUFEN		BIT(10)
+#define STM32F4_I2C_CR2_ITEVTEN		BIT(9)
+#define STM32F4_I2C_CR2_ITERREN		BIT(8)
+#define STM32F4_I2C_CR2_IRQ_MASK	(STM32F4_I2C_CR2_ITBUFEN | \
+					 STM32F4_I2C_CR2_ITEVTEN | \
+					 STM32F4_I2C_CR2_ITERREN)
+
+/* STM32F4 I2C Status 1 */
+#define STM32F4_I2C_SR1_AF		BIT(10)
+#define STM32F4_I2C_SR1_ARLO		BIT(9)
+#define STM32F4_I2C_SR1_BERR		BIT(8)
+#define STM32F4_I2C_SR1_TXE		BIT(7)
+#define STM32F4_I2C_SR1_RXNE		BIT(6)
+#define STM32F4_I2C_SR1_BTF		BIT(2)
+#define STM32F4_I2C_SR1_ADDR		BIT(1)
+#define STM32F4_I2C_SR1_SB		BIT(0)
+#define STM32F4_I2C_SR1_ITEVTEN_MASK	(STM32F4_I2C_SR1_BTF | \
+					 STM32F4_I2C_SR1_ADDR | \
+					 STM32F4_I2C_SR1_SB)
+#define STM32F4_I2C_SR1_ITBUFEN_MASK	(STM32F4_I2C_SR1_TXE | \
+					 STM32F4_I2C_SR1_RXNE)
+#define STM32F4_I2C_SR1_ITERREN_MASK	(STM32F4_I2C_SR1_AF | \
+					 STM32F4_I2C_SR1_ARLO | \
+					 STM32F4_I2C_SR1_BERR)
+
+/* STM32F4 I2C Status 2 */
+#define STM32F4_I2C_SR2_BUSY		BIT(1)
+
+/* STM32F4 I2C Control Clock */
+#define STM32F4_I2C_CCR_CCR_MASK	GENMASK(11, 0)
+#define STM32F4_I2C_CCR_CCR(n)		((n) & STM32F4_I2C_CCR_CCR_MASK)
+#define STM32F4_I2C_CCR_FS		BIT(15)
+#define STM32F4_I2C_CCR_DUTY		BIT(14)
+
+/* STM32F4 I2C Trise */
+#define STM32F4_I2C_TRISE_VALUE_MASK	GENMASK(5, 0)
+#define STM32F4_I2C_TRISE_VALUE(n)	((n) & STM32F4_I2C_TRISE_VALUE_MASK)
+
+#define STM32F4_I2C_MIN_STANDARD_FREQ	2U
+#define STM32F4_I2C_MIN_FAST_FREQ	6U
+#define STM32F4_I2C_MAX_FREQ		46U
+#define HZ_TO_MHZ			1000000
+
+/**
+ * struct stm32f4_i2c_msg - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct stm32f4_i2c_msg {
+	u8 addr;
+	u32 count;
+	u8 *buf;
+	int result;
+	bool stop;
+};
+
+/**
+ * struct stm32f4_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @clk: hw i2c clock
+ * @speed: I2C clock frequency of the controller. Standard or Fast are supported
+ * @parent_rate: I2C clock parent rate in MHz
+ * @msg: I2C transfer information
+ */
+struct stm32f4_i2c_dev {
+	struct i2c_adapter adap;
+	struct device *dev;
+	void __iomem *base;
+	struct completion complete;
+	struct clk *clk;
+	int speed;
+	int parent_rate;
+	struct stm32f4_i2c_msg msg;
+};
+
+static inline void stm32f4_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void stm32f4_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+static void stm32f4_i2c_disable_irq(struct stm32f4_i2c_dev *i2c_dev)
+{
+	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+	stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK);
+}
+
+static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
+{
+	u32 freq;
+	u32 cr2 = 0;
+
+	i2c_dev->parent_rate = clk_get_rate(i2c_dev->clk);
+	freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+
+	if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
+		/*
+		 * To reach 100 kHz, the parent clk frequency should be between
+		 * a minimum value of 2 MHz and a maximum value of 46 MHz due
+		 * to hardware limitation
+		 */
+		if (freq < STM32F4_I2C_MIN_STANDARD_FREQ ||
+		    freq > STM32F4_I2C_MAX_FREQ) {
+			dev_err(i2c_dev->dev,
+				"bad parent clk freq for standard mode\n");
+			return -EINVAL;
+		}
+	} else {
+		/*
+		 * To be as close as possible to 400 kHz, the parent clk
+		 * frequency should be between a minimum value of 6 MHz and a
+		 * maximum value of 46 MHz due to hardware limitation
+		 */
+		if (freq < STM32F4_I2C_MIN_FAST_FREQ ||
+		    freq > STM32F4_I2C_MAX_FREQ) {
+			dev_err(i2c_dev->dev,
+				"bad parent clk freq for fast mode\n");
+			return -EINVAL;
+		}
+	}
+
+	cr2 |= STM32F4_I2C_CR2_FREQ(freq);
+	writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2);
+
+	return 0;
+}
+
+static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev)
+{
+	u32 freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+	u32 trise;
+
+	/*
+	 * These bits must be programmed with the maximum SCL rise time given in
+	 * the I2C bus specification, incremented by 1.
+	 *
+	 * In standard mode, the maximum allowed SCL rise time is 1000 ns.
+	 * If, in the I2C_CR2 register, the value of FREQ[5:0] bits is equal to
+	 * 0x08 so period = 125 ns therefore the TRISE[5:0] bits must be
+	 * programmed with 0x9. (1000 ns / 125 ns + 1)
+	 * So, for I2C standard mode TRISE = FREQ[5:0] + 1
+	 *
+	 * In fast mode, the maximum allowed SCL rise time is 300 ns.
+	 * If, in the I2C_CR2 register, the value of FREQ[5:0] bits is equal to
+	 * 0x08 so period = 125 ns therefore the TRISE[5:0] bits must be
+	 * programmed with 0x3. (300 ns / 125 ns + 1)
+	 * So, for I2C fast mode TRISE = FREQ[5:0] * 300 / 1000 + 1
+	 *
+	 * Function stm32f4_i2c_set_periph_clk_freq made sure that parent rate
+	 * is not higher than 46 MHz . As a result trise is at most 4 bits wide
+	 * and so fits into the TRISE bits [5:0].
+	 */
+	if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD)
+		trise = freq + 1;
+	else
+		trise = freq * 3 / 10 + 1;
+
+	writel_relaxed(STM32F4_I2C_TRISE_VALUE(trise),
+		       i2c_dev->base + STM32F4_I2C_TRISE);
+}
+
+static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
+{
+	u32 val;
+	u32 ccr = 0;
+
+	if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
+		/*
+		 * In standard mode:
+		 * t_scl_high = t_scl_low = CCR * I2C parent clk period
+		 * So to reach 100 kHz, we have:
+		 * CCR = I2C parent rate / 100 kHz >> 1
+		 *
+		 * For example with parent rate = 2 MHz:
+		 * CCR = 2000000 / (100000 << 1) = 10
+		 * t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns
+		 * t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached
+		 *
+		 * Function stm32f4_i2c_set_periph_clk_freq made sure that
+		 * parent rate is not higher than 46 MHz . As a result val
+		 * is at most 8 bits wide and so fits into the CCR bits [11:0].
+		 */
+		val = i2c_dev->parent_rate / (100000 << 1);
+	} else {
+		/*
+		 * In fast mode, we compute CCR with duty = 0 as with low
+		 * frequencies we are not able to reach 400 kHz.
+		 * In that case:
+		 * t_scl_high = CCR * I2C parent clk period
+		 * t_scl_low = 2 * CCR * I2C parent clk period
+		 * So, CCR = I2C parent rate / (400 kHz * 3)
+		 *
+		 * For example with parent rate = 6 MHz:
+		 * CCR = 6000000 / (400000 * 3) = 5
+		 * t_scl_high = 5 * (1 / 6000000) = 833 ns > 600 ns
+		 * t_scl_low = 2 * 5 * (1 / 6000000) = 1667 ns > 1300 ns
+		 * t_scl_high + t_scl_low = 2500 ns so 400 kHz is reached
+		 *
+		 * Function stm32f4_i2c_set_periph_clk_freq made sure that
+		 * parent rate is not higher than 46 MHz . As a result val
+		 * is at most 6 bits wide and so fits into the CCR bits [11:0].
+		 */
+		val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3);
+
+		/* Select Fast mode */
+		ccr |= STM32F4_I2C_CCR_FS;
+	}
+
+	ccr |= STM32F4_I2C_CCR_CCR(val);
+	writel_relaxed(ccr, i2c_dev->base + STM32F4_I2C_CCR);
+}
+
+/**
+ * stm32f4_i2c_hw_config() - Prepare I2C block
+ * @i2c_dev: Controller's private data
+ */
+static int stm32f4_i2c_hw_config(struct stm32f4_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = stm32f4_i2c_set_periph_clk_freq(i2c_dev);
+	if (ret)
+		return ret;
+
+	stm32f4_i2c_set_rise_time(i2c_dev);
+
+	stm32f4_i2c_set_speed_mode(i2c_dev);
+
+	/* Enable I2C */
+	writel_relaxed(STM32F4_I2C_CR1_PE, i2c_dev->base + STM32F4_I2C_CR1);
+
+	return 0;
+}
+
+static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev)
+{
+	u32 status;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F4_I2C_SR2,
+					 status,
+					 !(status & STM32F4_I2C_SR2_BUSY),
+					 10, 1000);
+	if (ret) {
+		dev_dbg(i2c_dev->dev, "bus not free\n");
+		ret = -EBUSY;
+	}
+
+	return ret;
+}
+
+/**
+ * stm32f4_i2c_write_ byte() - Write a byte in the data register
+ * @i2c_dev: Controller's private data
+ * @byte: Data to write in the register
+ */
+static void stm32f4_i2c_write_byte(struct stm32f4_i2c_dev *i2c_dev, u8 byte)
+{
+	writel_relaxed(byte, i2c_dev->base + STM32F4_I2C_DR);
+}
+
+/**
+ * stm32f4_i2c_write_msg() - Fill the data register in write mode
+ * @i2c_dev: Controller's private data
+ *
+ * This function fills the data register with I2C transfer buffer
+ */
+static void stm32f4_i2c_write_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+
+	stm32f4_i2c_write_byte(i2c_dev, *msg->buf++);
+	msg->count--;
+}
+
+static void stm32f4_i2c_read_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	u32 rbuf;
+
+	rbuf = readl_relaxed(i2c_dev->base + STM32F4_I2C_DR);
+	*msg->buf++ = rbuf;
+	msg->count--;
+}
+
+static void stm32f4_i2c_terminate_xfer(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+	stm32f4_i2c_disable_irq(i2c_dev);
+
+	reg = i2c_dev->base + STM32F4_I2C_CR1;
+	if (msg->stop)
+		stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+	else
+		stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+	complete(&i2c_dev->complete);
+}
+
+/**
+ * stm32f4_i2c_handle_write() - Handle FIFO empty interrupt in case of write
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_write(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+	if (msg->count) {
+		stm32f4_i2c_write_msg(i2c_dev);
+		if (!msg->count) {
+			/*
+			 * Disable buffer interrupts for RX not empty and TX
+			 * empty events
+			 */
+			stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+		}
+	} else {
+		stm32f4_i2c_terminate_xfer(i2c_dev);
+	}
+}
+
+/**
+ * stm32f4_i2c_handle_read() - Handle FIFO empty interrupt in case of read
+ * @i2c_dev: Controller's private data
+ *
+ * This function is called when a new data is received in data register
+ */
+static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+	switch (msg->count) {
+	case 1:
+		stm32f4_i2c_disable_irq(i2c_dev);
+		stm32f4_i2c_read_msg(i2c_dev);
+		complete(&i2c_dev->complete);
+		break;
+	/*
+	 * For 2-byte reception, 3-byte reception and for Data N-2, N-1 and N
+	 * for N-byte reception with N > 3, we do not have to read the data
+	 * register when RX not empty event occurs as we have to wait for byte
+	 * transferred finished event before reading data.
+	 * So, here we just disable buffer interrupt in order to avoid another
+	 * system preemption due to RX not empty event.
+	 */
+	case 2:
+	case 3:
+		stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+		break;
+	/*
+	 * For N byte reception with N > 3 we directly read data register
+	 * until N-2 data.
+	 */
+	default:
+		stm32f4_i2c_read_msg(i2c_dev);
+	}
+}
+
+/**
+ * stm32f4_i2c_handle_rx_done() - Handle byte transfer finished interrupt
+ * in case of read
+ * @i2c_dev: Controller's private data
+ *
+ * This function is called when a new data is received in the shift register
+ * but data register has not been read yet.
+ */
+static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	void __iomem *reg;
+	u32 mask;
+	int i;
+
+	switch (msg->count) {
+	case 2:
+		/*
+		 * In order to correctly send the Stop or Repeated Start
+		 * condition on the I2C bus, the STOP/START bit has to be set
+		 * before reading the last two bytes (data N-1 and N).
+		 * After that, we could read the last two bytes, disable
+		 * remaining interrupts and notify the end of xfer to the
+		 * client
+		 */
+		reg = i2c_dev->base + STM32F4_I2C_CR1;
+		if (msg->stop)
+			stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+		else
+			stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+		for (i = 2; i > 0; i--)
+			stm32f4_i2c_read_msg(i2c_dev);
+
+		reg = i2c_dev->base + STM32F4_I2C_CR2;
+		mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+		stm32f4_i2c_clr_bits(reg, mask);
+
+		complete(&i2c_dev->complete);
+		break;
+	case 3:
+		/*
+		 * In order to correctly generate the NACK pulse after the last
+		 * received data byte, we have to enable NACK before reading N-2
+		 * data
+		 */
+		reg = i2c_dev->base + STM32F4_I2C_CR1;
+		stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK);
+		stm32f4_i2c_read_msg(i2c_dev);
+		break;
+	default:
+		stm32f4_i2c_read_msg(i2c_dev);
+	}
+}
+
+/**
+ * stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of
+ * master receiver
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev)
+{
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	u32 cr1;
+
+	switch (msg->count) {
+	case 0:
+		stm32f4_i2c_terminate_xfer(i2c_dev);
+
+		/* Clear ADDR flag */
+		readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+		break;
+	case 1:
+		/*
+		 * Single byte reception:
+		 * Enable NACK and reset POS (Acknowledge position).
+		 * Then, clear ADDR flag and set STOP or RepSTART.
+		 * In that way, the NACK and STOP or RepStart pulses will be
+		 * sent as soon as the byte will be received in shift register
+		 */
+		cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+		cr1 &= ~(STM32F4_I2C_CR1_ACK | STM32F4_I2C_CR1_POS);
+		writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+		readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+
+		if (msg->stop)
+			cr1 |= STM32F4_I2C_CR1_STOP;
+		else
+			cr1 |= STM32F4_I2C_CR1_START;
+		writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+		break;
+	case 2:
+		/*
+		 * 2-byte reception:
+		 * Enable NACK, set POS (NACK position) and clear ADDR flag.
+		 * In that way, NACK will be sent for the next byte which will
+		 * be received in the shift register instead of the current
+		 * one.
+		 */
+		cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+		cr1 &= ~STM32F4_I2C_CR1_ACK;
+		cr1 |= STM32F4_I2C_CR1_POS;
+		writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+		readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+		break;
+
+	default:
+		/*
+		 * N-byte reception:
+		 * Enable ACK, reset POS (ACK postion) and clear ADDR flag.
+		 * In that way, ACK will be sent as soon as the current byte
+		 * will be received in the shift register
+		 */
+		cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+		cr1 |= STM32F4_I2C_CR1_ACK;
+		cr1 &= ~STM32F4_I2C_CR1_POS;
+		writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+		readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+		break;
+	}
+}
+
+/**
+ * stm32f4_i2c_isr_event() - Interrupt routine for I2C bus event
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_event(int irq, void *data)
+{
+	struct stm32f4_i2c_dev *i2c_dev = data;
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	u32 possible_status = STM32F4_I2C_SR1_ITEVTEN_MASK;
+	u32 status, ien, event, cr2;
+
+	cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+	ien = cr2 & STM32F4_I2C_CR2_IRQ_MASK;
+
+	/* Update possible_status if buffer interrupt is enabled */
+	if (ien & STM32F4_I2C_CR2_ITBUFEN)
+		possible_status |= STM32F4_I2C_SR1_ITBUFEN_MASK;
+
+	status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+	event = status & possible_status;
+	if (!event) {
+		dev_dbg(i2c_dev->dev,
+			"spurious evt irq (status=0x%08x, ien=0x%08x)\n",
+			status, ien);
+		return IRQ_NONE;
+	}
+
+	/* Start condition generated */
+	if (event & STM32F4_I2C_SR1_SB)
+		stm32f4_i2c_write_byte(i2c_dev, msg->addr);
+
+	/* I2C Address sent */
+	if (event & STM32F4_I2C_SR1_ADDR) {
+		if (msg->addr & I2C_M_RD)
+			stm32f4_i2c_handle_rx_addr(i2c_dev);
+		else
+			readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+
+		/*
+		 * Enable buffer interrupts for RX not empty and TX empty
+		 * events
+		 */
+		cr2 |= STM32F4_I2C_CR2_ITBUFEN;
+		writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2);
+	}
+
+	/* TX empty */
+	if ((event & STM32F4_I2C_SR1_TXE) && !(msg->addr & I2C_M_RD))
+		stm32f4_i2c_handle_write(i2c_dev);
+
+	/* RX not empty */
+	if ((event & STM32F4_I2C_SR1_RXNE) && (msg->addr & I2C_M_RD))
+		stm32f4_i2c_handle_read(i2c_dev);
+
+	/*
+	 * The BTF (Byte Transfer finished) event occurs when:
+	 * - in reception : a new byte is received in the shift register
+	 * but the previous byte has not been read yet from data register
+	 * - in transmission: a new byte should be sent but the data register
+	 * has not been written yet
+	 */
+	if (event & STM32F4_I2C_SR1_BTF) {
+		if (msg->addr & I2C_M_RD)
+			stm32f4_i2c_handle_rx_done(i2c_dev);
+		else
+			stm32f4_i2c_handle_write(i2c_dev);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_isr_error() - Interrupt routine for I2C bus error
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data)
+{
+	struct stm32f4_i2c_dev *i2c_dev = data;
+	struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+	void __iomem *reg;
+	u32 status;
+
+	status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+
+	/* Arbitration lost */
+	if (status & STM32F4_I2C_SR1_ARLO) {
+		status &= ~STM32F4_I2C_SR1_ARLO;
+		writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+		msg->result = -EAGAIN;
+	}
+
+	/*
+	 * Acknowledge failure:
+	 * In master transmitter mode a Stop must be generated by software
+	 */
+	if (status & STM32F4_I2C_SR1_AF) {
+		if (!(msg->addr & I2C_M_RD)) {
+			reg = i2c_dev->base + STM32F4_I2C_CR1;
+			stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+		}
+		status &= ~STM32F4_I2C_SR1_AF;
+		writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+		msg->result = -EIO;
+	}
+
+	/* Bus error */
+	if (status & STM32F4_I2C_SR1_BERR) {
+		status &= ~STM32F4_I2C_SR1_BERR;
+		writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+		msg->result = -EIO;
+	}
+
+	stm32f4_i2c_disable_irq(i2c_dev);
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_xfer_msg() - Transfer a single I2C message
+ * @i2c_dev: Controller's private data
+ * @msg: I2C message to transfer
+ * @is_first: first message of the sequence
+ * @is_last: last message of the sequence
+ */
+static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
+				struct i2c_msg *msg, bool is_first,
+				bool is_last)
+{
+	struct stm32f4_i2c_msg *f4_msg = &i2c_dev->msg;
+	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
+	unsigned long timeout;
+	u32 mask;
+	int ret;
+
+	f4_msg->addr = i2c_8bit_addr_from_msg(msg);
+	f4_msg->buf = msg->buf;
+	f4_msg->count = msg->len;
+	f4_msg->result = 0;
+	f4_msg->stop = is_last;
+
+	reinit_completion(&i2c_dev->complete);
+
+	/* Enable events and errors interrupts */
+	mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+	stm32f4_i2c_set_bits(i2c_dev->base + STM32F4_I2C_CR2, mask);
+
+	if (is_first) {
+		ret = stm32f4_i2c_wait_free_bus(i2c_dev);
+		if (ret)
+			return ret;
+
+		/* START generation */
+		stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+	}
+
+	timeout = wait_for_completion_timeout(&i2c_dev->complete,
+					      i2c_dev->adap.timeout);
+	ret = f4_msg->result;
+
+	if (!timeout)
+		ret = -ETIMEDOUT;
+
+	return ret;
+}
+
+/**
+ * stm32f4_i2c_xfer() - Transfer combined I2C message
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num: Number of messages to be executed
+ */
+static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[],
+			    int num)
+{
+	struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+	int ret, i;
+
+	ret = clk_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	for (i = 0; i < num && !ret; i++)
+		ret = stm32f4_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0,
+					   i == num - 1);
+
+	clk_disable(i2c_dev->clk);
+
+	return (ret < 0) ? ret : num;
+}
+
+static u32 stm32f4_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm stm32f4_i2c_algo = {
+	.master_xfer = stm32f4_i2c_xfer,
+	.functionality = stm32f4_i2c_func,
+};
+
+static int stm32f4_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct stm32f4_i2c_dev *i2c_dev;
+	struct resource *res;
+	u32 irq_event, irq_error, clk_rate;
+	struct i2c_adapter *adap;
+	struct reset_control *rst;
+	int ret;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	irq_event = irq_of_parse_and_map(np, 0);
+	if (!irq_event) {
+		dev_err(&pdev->dev, "IRQ event missing or invalid\n");
+		return -EINVAL;
+	}
+
+	irq_error = irq_of_parse_and_map(np, 1);
+	if (!irq_error) {
+		dev_err(&pdev->dev, "IRQ error missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
+		return ret;
+	}
+
+	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		dev_err(&pdev->dev, "Error: Missing controller reset\n");
+		ret = PTR_ERR(rst);
+		goto clk_free;
+	}
+	reset_control_assert(rst);
+	udelay(2);
+	reset_control_deassert(rst);
+
+	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if (!ret && clk_rate >= 400000)
+		i2c_dev->speed = STM32_I2C_SPEED_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	ret = devm_request_irq(&pdev->dev, irq_event, stm32f4_i2c_isr_event, 0,
+			       pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq event %i\n",
+			irq_event);
+		goto clk_free;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
+			       pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq error %i\n",
+			irq_error);
+		goto clk_free;
+	}
+
+	ret = stm32f4_i2c_hw_config(i2c_dev);
+	if (ret)
+		goto clk_free;
+
+	adap = &i2c_dev->adap;
+	i2c_set_adapdata(adap, i2c_dev);
+	snprintf(adap->name, sizeof(adap->name), "STM32 I2C(%pa)", &res->start);
+	adap->owner = THIS_MODULE;
+	adap->timeout = 2 * HZ;
+	adap->retries = 0;
+	adap->algo = &stm32f4_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		goto clk_free;
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	clk_disable(i2c_dev->clk);
+
+	dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
+
+	return 0;
+
+clk_free:
+	clk_disable_unprepare(i2c_dev->clk);
+	return ret;
+}
+
+static int stm32f4_i2c_remove(struct platform_device *pdev)
+{
+	struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adap);
+
+	clk_unprepare(i2c_dev->clk);
+
+	return 0;
+}
+
+static const struct of_device_id stm32f4_i2c_match[] = {
+	{ .compatible = "st,stm32f4-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32f4_i2c_match);
+
+static struct platform_driver stm32f4_i2c_driver = {
+	.driver = {
+		.name = "stm32f4-i2c",
+		.of_match_table = stm32f4_i2c_match,
+	},
+	.probe = stm32f4_i2c_probe,
+	.remove = stm32f4_i2c_remove,
+};
+
+module_platform_driver(stm32f4_i2c_driver);
+
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32F4 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f7.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f7.c
new file mode 100644
index 0000000..14f6075
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stm32f7.c
@@ -0,0 +1,974 @@
+/*
+ * Driver for STMicroelectronics STM32F7 I2C controller
+ *
+ * This I2C controller is described in the STM32F75xxx and STM32F74xxx Soc
+ * reference manual.
+ * Please see below a link to the documentation:
+ * http://www.st.com/resource/en/reference_manual/dm00124865.pdf
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * This driver is based on i2c-stm32f4.c
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include "i2c-stm32.h"
+
+/* STM32F7 I2C registers */
+#define STM32F7_I2C_CR1				0x00
+#define STM32F7_I2C_CR2				0x04
+#define STM32F7_I2C_TIMINGR			0x10
+#define STM32F7_I2C_ISR				0x18
+#define STM32F7_I2C_ICR				0x1C
+#define STM32F7_I2C_RXDR			0x24
+#define STM32F7_I2C_TXDR			0x28
+
+/* STM32F7 I2C control 1 */
+#define STM32F7_I2C_CR1_ANFOFF			BIT(12)
+#define STM32F7_I2C_CR1_ERRIE			BIT(7)
+#define STM32F7_I2C_CR1_TCIE			BIT(6)
+#define STM32F7_I2C_CR1_STOPIE			BIT(5)
+#define STM32F7_I2C_CR1_NACKIE			BIT(4)
+#define STM32F7_I2C_CR1_ADDRIE			BIT(3)
+#define STM32F7_I2C_CR1_RXIE			BIT(2)
+#define STM32F7_I2C_CR1_TXIE			BIT(1)
+#define STM32F7_I2C_CR1_PE			BIT(0)
+#define STM32F7_I2C_ALL_IRQ_MASK		(STM32F7_I2C_CR1_ERRIE \
+						| STM32F7_I2C_CR1_TCIE \
+						| STM32F7_I2C_CR1_STOPIE \
+						| STM32F7_I2C_CR1_NACKIE \
+						| STM32F7_I2C_CR1_RXIE \
+						| STM32F7_I2C_CR1_TXIE)
+
+/* STM32F7 I2C control 2 */
+#define STM32F7_I2C_CR2_RELOAD			BIT(24)
+#define STM32F7_I2C_CR2_NBYTES_MASK		GENMASK(23, 16)
+#define STM32F7_I2C_CR2_NBYTES(n)		(((n) & 0xff) << 16)
+#define STM32F7_I2C_CR2_NACK			BIT(15)
+#define STM32F7_I2C_CR2_STOP			BIT(14)
+#define STM32F7_I2C_CR2_START			BIT(13)
+#define STM32F7_I2C_CR2_RD_WRN			BIT(10)
+#define STM32F7_I2C_CR2_SADD7_MASK		GENMASK(7, 1)
+#define STM32F7_I2C_CR2_SADD7(n)		(((n) & 0x7f) << 1)
+
+/* STM32F7 I2C Interrupt Status */
+#define STM32F7_I2C_ISR_BUSY			BIT(15)
+#define STM32F7_I2C_ISR_ARLO			BIT(9)
+#define STM32F7_I2C_ISR_BERR			BIT(8)
+#define STM32F7_I2C_ISR_TCR			BIT(7)
+#define STM32F7_I2C_ISR_TC			BIT(6)
+#define STM32F7_I2C_ISR_STOPF			BIT(5)
+#define STM32F7_I2C_ISR_NACKF			BIT(4)
+#define STM32F7_I2C_ISR_RXNE			BIT(2)
+#define STM32F7_I2C_ISR_TXIS			BIT(1)
+
+/* STM32F7 I2C Interrupt Clear */
+#define STM32F7_I2C_ICR_ARLOCF			BIT(9)
+#define STM32F7_I2C_ICR_BERRCF			BIT(8)
+#define STM32F7_I2C_ICR_STOPCF			BIT(5)
+#define STM32F7_I2C_ICR_NACKCF			BIT(4)
+
+/* STM32F7 I2C Timing */
+#define STM32F7_I2C_TIMINGR_PRESC(n)		(((n) & 0xf) << 28)
+#define STM32F7_I2C_TIMINGR_SCLDEL(n)		(((n) & 0xf) << 20)
+#define STM32F7_I2C_TIMINGR_SDADEL(n)		(((n) & 0xf) << 16)
+#define STM32F7_I2C_TIMINGR_SCLH(n)		(((n) & 0xff) << 8)
+#define STM32F7_I2C_TIMINGR_SCLL(n)		((n) & 0xff)
+
+#define STM32F7_I2C_MAX_LEN			0xff
+
+#define STM32F7_I2C_DNF_DEFAULT			0
+#define STM32F7_I2C_DNF_MAX			16
+
+#define STM32F7_I2C_ANALOG_FILTER_ENABLE	1
+#define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN	50	/* ns */
+#define STM32F7_I2C_ANALOG_FILTER_DELAY_MAX	260	/* ns */
+
+#define STM32F7_I2C_RISE_TIME_DEFAULT		25	/* ns */
+#define STM32F7_I2C_FALL_TIME_DEFAULT		10	/* ns */
+
+#define STM32F7_PRESC_MAX			BIT(4)
+#define STM32F7_SCLDEL_MAX			BIT(4)
+#define STM32F7_SDADEL_MAX			BIT(4)
+#define STM32F7_SCLH_MAX			BIT(8)
+#define STM32F7_SCLL_MAX			BIT(8)
+
+/**
+ * struct stm32f7_i2c_spec - private i2c specification timing
+ * @rate: I2C bus speed (Hz)
+ * @rate_min: 80% of I2C bus speed (Hz)
+ * @rate_max: 100% of I2C bus speed (Hz)
+ * @fall_max: Max fall time of both SDA and SCL signals (ns)
+ * @rise_max: Max rise time of both SDA and SCL signals (ns)
+ * @hddat_min: Min data hold time (ns)
+ * @vddat_max: Max data valid time (ns)
+ * @sudat_min: Min data setup time (ns)
+ * @l_min: Min low period of the SCL clock (ns)
+ * @h_min: Min high period of the SCL clock (ns)
+ */
+struct stm32f7_i2c_spec {
+	u32 rate;
+	u32 rate_min;
+	u32 rate_max;
+	u32 fall_max;
+	u32 rise_max;
+	u32 hddat_min;
+	u32 vddat_max;
+	u32 sudat_min;
+	u32 l_min;
+	u32 h_min;
+};
+
+/**
+ * struct stm32f7_i2c_setup - private I2C timing setup parameters
+ * @speed: I2C speed mode (standard, Fast Plus)
+ * @speed_freq: I2C speed frequency  (Hz)
+ * @clock_src: I2C clock source frequency (Hz)
+ * @rise_time: Rise time (ns)
+ * @fall_time: Fall time (ns)
+ * @dnf: Digital filter coefficient (0-16)
+ * @analog_filter: Analog filter delay (On/Off)
+ */
+struct stm32f7_i2c_setup {
+	enum stm32_i2c_speed speed;
+	u32 speed_freq;
+	u32 clock_src;
+	u32 rise_time;
+	u32 fall_time;
+	u8 dnf;
+	bool analog_filter;
+};
+
+/**
+ * struct stm32f7_i2c_timings - private I2C output parameters
+ * @prec: Prescaler value
+ * @scldel: Data setup time
+ * @sdadel: Data hold time
+ * @sclh: SCL high period (master mode)
+ * @sclh: SCL low period (master mode)
+ */
+struct stm32f7_i2c_timings {
+	struct list_head node;
+	u8 presc;
+	u8 scldel;
+	u8 sdadel;
+	u8 sclh;
+	u8 scll;
+};
+
+/**
+ * struct stm32f7_i2c_msg - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct stm32f7_i2c_msg {
+	u8 addr;
+	u32 count;
+	u8 *buf;
+	int result;
+	bool stop;
+};
+
+/**
+ * struct stm32f7_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @clk: hw i2c clock
+ * @speed: I2C clock frequency of the controller. Standard, Fast or Fast+
+ * @msg: Pointer to data to be written
+ * @msg_num: number of I2C messages to be executed
+ * @msg_id: message identifiant
+ * @f7_msg: customized i2c msg for driver usage
+ * @setup: I2C timing input setup
+ * @timing: I2C computed timings
+ */
+struct stm32f7_i2c_dev {
+	struct i2c_adapter adap;
+	struct device *dev;
+	void __iomem *base;
+	struct completion complete;
+	struct clk *clk;
+	int speed;
+	struct i2c_msg *msg;
+	unsigned int msg_num;
+	unsigned int msg_id;
+	struct stm32f7_i2c_msg f7_msg;
+	struct stm32f7_i2c_setup setup;
+	struct stm32f7_i2c_timings timing;
+};
+
+/*
+ * All these values are coming from I2C Specification, Version 6.0, 4th of
+ * April 2014.
+ *
+ * Table10. Characteristics of the SDA and SCL bus lines for Standard, Fast,
+ * and Fast-mode Plus I2C-bus devices
+ */
+static struct stm32f7_i2c_spec i2c_specs[] = {
+	[STM32_I2C_SPEED_STANDARD] = {
+		.rate = 100000,
+		.rate_min = 80000,
+		.rate_max = 100000,
+		.fall_max = 300,
+		.rise_max = 1000,
+		.hddat_min = 0,
+		.vddat_max = 3450,
+		.sudat_min = 250,
+		.l_min = 4700,
+		.h_min = 4000,
+	},
+	[STM32_I2C_SPEED_FAST] = {
+		.rate = 400000,
+		.rate_min = 320000,
+		.rate_max = 400000,
+		.fall_max = 300,
+		.rise_max = 300,
+		.hddat_min = 0,
+		.vddat_max = 900,
+		.sudat_min = 100,
+		.l_min = 1300,
+		.h_min = 600,
+	},
+	[STM32_I2C_SPEED_FAST_PLUS] = {
+		.rate = 1000000,
+		.rate_min = 800000,
+		.rate_max = 1000000,
+		.fall_max = 100,
+		.rise_max = 120,
+		.hddat_min = 0,
+		.vddat_max = 450,
+		.sudat_min = 50,
+		.l_min = 500,
+		.h_min = 260,
+	},
+};
+
+static const struct stm32f7_i2c_setup stm32f7_setup = {
+	.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
+	.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
+	.dnf = STM32F7_I2C_DNF_DEFAULT,
+	.analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
+};
+
+static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void stm32f7_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
+				      struct stm32f7_i2c_setup *setup,
+				      struct stm32f7_i2c_timings *output)
+{
+	u32 p_prev = STM32F7_PRESC_MAX;
+	u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
+				       setup->clock_src);
+	u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
+				       setup->speed_freq);
+	u32 clk_error_prev = i2cbus;
+	u32 tsync;
+	u32 af_delay_min, af_delay_max;
+	u32 dnf_delay;
+	u32 clk_min, clk_max;
+	int sdadel_min, sdadel_max;
+	int scldel_min;
+	struct stm32f7_i2c_timings *v, *_v, *s;
+	struct list_head solutions;
+	u16 p, l, a, h;
+	int ret = 0;
+
+	if (setup->speed >= STM32_I2C_SPEED_END) {
+		dev_err(i2c_dev->dev, "speed out of bound {%d/%d}\n",
+			setup->speed, STM32_I2C_SPEED_END - 1);
+		return -EINVAL;
+	}
+
+	if ((setup->rise_time > i2c_specs[setup->speed].rise_max) ||
+	    (setup->fall_time > i2c_specs[setup->speed].fall_max)) {
+		dev_err(i2c_dev->dev,
+			"timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
+			setup->rise_time, i2c_specs[setup->speed].rise_max,
+			setup->fall_time, i2c_specs[setup->speed].fall_max);
+		return -EINVAL;
+	}
+
+	if (setup->dnf > STM32F7_I2C_DNF_MAX) {
+		dev_err(i2c_dev->dev,
+			"DNF out of bound %d/%d\n",
+			setup->dnf, STM32F7_I2C_DNF_MAX);
+		return -EINVAL;
+	}
+
+	if (setup->speed_freq > i2c_specs[setup->speed].rate) {
+		dev_err(i2c_dev->dev, "ERROR: Freq {%d/%d}\n",
+			setup->speed_freq, i2c_specs[setup->speed].rate);
+		return -EINVAL;
+	}
+
+	/*  Analog and Digital Filters */
+	af_delay_min =
+		(setup->analog_filter ?
+		 STM32F7_I2C_ANALOG_FILTER_DELAY_MIN : 0);
+	af_delay_max =
+		(setup->analog_filter ?
+		 STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
+	dnf_delay = setup->dnf * i2cclk;
+
+	sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time -
+		af_delay_min - (setup->dnf + 3) * i2cclk;
+
+	sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
+		af_delay_max - (setup->dnf + 4) * i2cclk;
+
+	scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min;
+
+	if (sdadel_min < 0)
+		sdadel_min = 0;
+	if (sdadel_max < 0)
+		sdadel_max = 0;
+
+	dev_dbg(i2c_dev->dev, "SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n",
+		sdadel_min, sdadel_max, scldel_min);
+
+	INIT_LIST_HEAD(&solutions);
+	/* Compute possible values for PRESC, SCLDEL and SDADEL */
+	for (p = 0; p < STM32F7_PRESC_MAX; p++) {
+		for (l = 0; l < STM32F7_SCLDEL_MAX; l++) {
+			u32 scldel = (l + 1) * (p + 1) * i2cclk;
+
+			if (scldel < scldel_min)
+				continue;
+
+			for (a = 0; a < STM32F7_SDADEL_MAX; a++) {
+				u32 sdadel = (a * (p + 1) + 1) * i2cclk;
+
+				if (((sdadel >= sdadel_min) &&
+				     (sdadel <= sdadel_max)) &&
+				    (p != p_prev)) {
+					v = kmalloc(sizeof(*v), GFP_KERNEL);
+					if (!v) {
+						ret = -ENOMEM;
+						goto exit;
+					}
+
+					v->presc = p;
+					v->scldel = l;
+					v->sdadel = a;
+					p_prev = p;
+
+					list_add_tail(&v->node,
+						      &solutions);
+				}
+			}
+		}
+	}
+
+	if (list_empty(&solutions)) {
+		dev_err(i2c_dev->dev, "no Prescaler solution\n");
+		ret = -EPERM;
+		goto exit;
+	}
+
+	tsync = af_delay_min + dnf_delay + (2 * i2cclk);
+	s = NULL;
+	clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min;
+	clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max;
+
+	/*
+	 * Among Prescaler possibilities discovered above figures out SCL Low
+	 * and High Period. Provided:
+	 * - SCL Low Period has to be higher than SCL Clock Low Period
+	 *   defined by I2C Specification. I2C Clock has to be lower than
+	 *   (SCL Low Period - Analog/Digital filters) / 4.
+	 * - SCL High Period has to be lower than SCL Clock High Period
+	 *   defined by I2C Specification
+	 * - I2C Clock has to be lower than SCL High Period
+	 */
+	list_for_each_entry(v, &solutions, node) {
+		u32 prescaler = (v->presc + 1) * i2cclk;
+
+		for (l = 0; l < STM32F7_SCLL_MAX; l++) {
+			u32 tscl_l = (l + 1) * prescaler + tsync;
+
+			if ((tscl_l < i2c_specs[setup->speed].l_min) ||
+			    (i2cclk >=
+			     ((tscl_l - af_delay_min - dnf_delay) / 4))) {
+				continue;
+			}
+
+			for (h = 0; h < STM32F7_SCLH_MAX; h++) {
+				u32 tscl_h = (h + 1) * prescaler + tsync;
+				u32 tscl = tscl_l + tscl_h +
+					setup->rise_time + setup->fall_time;
+
+				if ((tscl >= clk_min) && (tscl <= clk_max) &&
+				    (tscl_h >= i2c_specs[setup->speed].h_min) &&
+				    (i2cclk < tscl_h)) {
+					int clk_error = tscl - i2cbus;
+
+					if (clk_error < 0)
+						clk_error = -clk_error;
+
+					if (clk_error < clk_error_prev) {
+						clk_error_prev = clk_error;
+						v->scll = l;
+						v->sclh = h;
+						s = v;
+					}
+				}
+			}
+		}
+	}
+
+	if (!s) {
+		dev_err(i2c_dev->dev, "no solution at all\n");
+		ret = -EPERM;
+		goto exit;
+	}
+
+	output->presc = s->presc;
+	output->scldel = s->scldel;
+	output->sdadel = s->sdadel;
+	output->scll = s->scll;
+	output->sclh = s->sclh;
+
+	dev_dbg(i2c_dev->dev,
+		"Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n",
+		output->presc,
+		output->scldel, output->sdadel,
+		output->scll, output->sclh);
+
+exit:
+	/* Release list and memory */
+	list_for_each_entry_safe(v, _v, &solutions, node) {
+		list_del(&v->node);
+		kfree(v);
+	}
+
+	return ret;
+}
+
+static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
+				    struct stm32f7_i2c_setup *setup)
+{
+	int ret = 0;
+
+	setup->speed = i2c_dev->speed;
+	setup->speed_freq = i2c_specs[setup->speed].rate;
+	setup->clock_src = clk_get_rate(i2c_dev->clk);
+
+	if (!setup->clock_src) {
+		dev_err(i2c_dev->dev, "clock rate is 0\n");
+		return -EINVAL;
+	}
+
+	do {
+		ret = stm32f7_i2c_compute_timing(i2c_dev, setup,
+						 &i2c_dev->timing);
+		if (ret) {
+			dev_err(i2c_dev->dev,
+				"failed to compute I2C timings.\n");
+			if (i2c_dev->speed > STM32_I2C_SPEED_STANDARD) {
+				i2c_dev->speed--;
+				setup->speed = i2c_dev->speed;
+				setup->speed_freq =
+					i2c_specs[setup->speed].rate;
+				dev_warn(i2c_dev->dev,
+					 "downgrade I2C Speed Freq to (%i)\n",
+					 i2c_specs[setup->speed].rate);
+			} else {
+				break;
+			}
+		}
+	} while (ret);
+
+	if (ret) {
+		dev_err(i2c_dev->dev, "Impossible to compute I2C timings.\n");
+		return ret;
+	}
+
+	dev_dbg(i2c_dev->dev, "I2C Speed(%i), Freq(%i), Clk Source(%i)\n",
+		setup->speed, setup->speed_freq, setup->clock_src);
+	dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
+		setup->rise_time, setup->fall_time);
+	dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
+		(setup->analog_filter ? "On" : "Off"), setup->dnf);
+
+	return 0;
+}
+
+static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_timings *t = &i2c_dev->timing;
+	u32 timing = 0;
+
+	/* Timing settings */
+	timing |= STM32F7_I2C_TIMINGR_PRESC(t->presc);
+	timing |= STM32F7_I2C_TIMINGR_SCLDEL(t->scldel);
+	timing |= STM32F7_I2C_TIMINGR_SDADEL(t->sdadel);
+	timing |= STM32F7_I2C_TIMINGR_SCLH(t->sclh);
+	timing |= STM32F7_I2C_TIMINGR_SCLL(t->scll);
+	writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
+
+	/* Enable I2C */
+	if (i2c_dev->setup.analog_filter)
+		stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+				     STM32F7_I2C_CR1_ANFOFF);
+	else
+		stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+				     STM32F7_I2C_CR1_ANFOFF);
+	stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+			     STM32F7_I2C_CR1_PE);
+}
+
+static void stm32f7_i2c_write_tx_data(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+
+	if (f7_msg->count) {
+		writeb_relaxed(*f7_msg->buf++, base + STM32F7_I2C_TXDR);
+		f7_msg->count--;
+	}
+}
+
+static void stm32f7_i2c_read_rx_data(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+
+	if (f7_msg->count) {
+		*f7_msg->buf++ = readb_relaxed(base + STM32F7_I2C_RXDR);
+		f7_msg->count--;
+	}
+}
+
+static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	u32 cr2;
+
+	cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+
+	cr2 &= ~STM32F7_I2C_CR2_NBYTES_MASK;
+	if (f7_msg->count > STM32F7_I2C_MAX_LEN) {
+		cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN);
+	} else {
+		cr2 &= ~STM32F7_I2C_CR2_RELOAD;
+		cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+	}
+
+	writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
+{
+	u32 status;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F7_I2C_ISR,
+					 status,
+					 !(status & STM32F7_I2C_ISR_BUSY),
+					 10, 1000);
+	if (ret) {
+		dev_dbg(i2c_dev->dev, "bus busy\n");
+		ret = -EBUSY;
+	}
+
+	return ret;
+}
+
+static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
+				 struct i2c_msg *msg)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+	u32 cr1, cr2;
+
+	f7_msg->addr = msg->addr;
+	f7_msg->buf = msg->buf;
+	f7_msg->count = msg->len;
+	f7_msg->result = 0;
+	f7_msg->stop = (i2c_dev->msg_id >= i2c_dev->msg_num - 1);
+
+	reinit_completion(&i2c_dev->complete);
+
+	cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+	cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+
+	/* Set transfer direction */
+	cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+	if (msg->flags & I2C_M_RD)
+		cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+	/* Set slave address */
+	cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
+	cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+
+	/* Set nb bytes to transfer and reload if needed */
+	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+	if (f7_msg->count > STM32F7_I2C_MAX_LEN) {
+		cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN);
+		cr2 |= STM32F7_I2C_CR2_RELOAD;
+	} else {
+		cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+	}
+
+	/* Enable NACK, STOP, error and transfer complete interrupts */
+	cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
+		STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
+
+	/* Clear TX/RX interrupt */
+	cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE);
+
+	/* Enable RX/TX interrupt according to msg direction */
+	if (msg->flags & I2C_M_RD)
+		cr1 |= STM32F7_I2C_CR1_RXIE;
+	else
+		cr1 |= STM32F7_I2C_CR1_TXIE;
+
+	/* Configure Start/Repeated Start */
+	cr2 |= STM32F7_I2C_CR2_START;
+
+	/* Write configurations registers */
+	writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+	writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+}
+
+static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+{
+	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+}
+
+static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
+{
+	struct stm32f7_i2c_dev *i2c_dev = data;
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+	u32 status, mask;
+
+	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+	/* Tx empty */
+	if (status & STM32F7_I2C_ISR_TXIS)
+		stm32f7_i2c_write_tx_data(i2c_dev);
+
+	/* RX not empty */
+	if (status & STM32F7_I2C_ISR_RXNE)
+		stm32f7_i2c_read_rx_data(i2c_dev);
+
+	/* NACK received */
+	if (status & STM32F7_I2C_ISR_NACKF) {
+		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+		writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+		f7_msg->result = -ENXIO;
+	}
+
+	/* STOP detection flag */
+	if (status & STM32F7_I2C_ISR_STOPF) {
+		/* Disable interrupts */
+		stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+
+		/* Clear STOP flag */
+		writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
+
+		complete(&i2c_dev->complete);
+	}
+
+	/* Transfer complete */
+	if (status & STM32F7_I2C_ISR_TC) {
+		if (f7_msg->stop) {
+			mask = STM32F7_I2C_CR2_STOP;
+			stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+		} else {
+			i2c_dev->msg_id++;
+			i2c_dev->msg++;
+			stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg);
+		}
+	}
+
+	/*
+	 * Transfer Complete Reload: 255 data bytes have been transferred
+	 * We have to prepare the I2C controller to transfer the remaining
+	 * data.
+	 */
+	if (status & STM32F7_I2C_ISR_TCR)
+		stm32f7_i2c_reload(i2c_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
+{
+	struct stm32f7_i2c_dev *i2c_dev = data;
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+	struct device *dev = i2c_dev->dev;
+	u32 status;
+
+	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+	/* Bus error */
+	if (status & STM32F7_I2C_ISR_BERR) {
+		dev_err(dev, "<%s>: Bus error\n", __func__);
+		writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
+		f7_msg->result = -EIO;
+	}
+
+	/* Arbitration loss */
+	if (status & STM32F7_I2C_ISR_ARLO) {
+		dev_dbg(dev, "<%s>: Arbitration loss\n", __func__);
+		writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
+		f7_msg->result = -EAGAIN;
+	}
+
+	stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+			    struct i2c_msg msgs[], int num)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	unsigned long time_left;
+	int ret;
+
+	i2c_dev->msg = msgs;
+	i2c_dev->msg_num = num;
+	i2c_dev->msg_id = 0;
+
+	ret = clk_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	ret = stm32f7_i2c_wait_free_bus(i2c_dev);
+	if (ret)
+		goto clk_free;
+
+	stm32f7_i2c_xfer_msg(i2c_dev, msgs);
+
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
+	ret = f7_msg->result;
+
+	if (!time_left) {
+		dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
+			i2c_dev->msg->addr);
+		ret = -ETIMEDOUT;
+	}
+
+clk_free:
+	clk_disable(i2c_dev->clk);
+
+	return (ret < 0) ? ret : num;
+}
+
+static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm stm32f7_i2c_algo = {
+	.master_xfer = stm32f7_i2c_xfer,
+	.functionality = stm32f7_i2c_func,
+};
+
+static int stm32f7_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct stm32f7_i2c_dev *i2c_dev;
+	const struct stm32f7_i2c_setup *setup;
+	struct resource *res;
+	u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
+	struct i2c_adapter *adap;
+	struct reset_control *rst;
+	int ret;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	irq_event = irq_of_parse_and_map(np, 0);
+	if (!irq_event) {
+		dev_err(&pdev->dev, "IRQ event missing or invalid\n");
+		return -EINVAL;
+	}
+
+	irq_error = irq_of_parse_and_map(np, 1);
+	if (!irq_error) {
+		dev_err(&pdev->dev, "IRQ error missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
+		return ret;
+	}
+
+	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+				       &clk_rate);
+	if (!ret && clk_rate >= 1000000)
+		i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
+	else if (!ret && clk_rate >= 400000)
+		i2c_dev->speed = STM32_I2C_SPEED_FAST;
+	else if (!ret && clk_rate >= 100000)
+		i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(rst)) {
+		dev_err(&pdev->dev, "Error: Missing controller reset\n");
+		ret = PTR_ERR(rst);
+		goto clk_free;
+	}
+	reset_control_assert(rst);
+	udelay(2);
+	reset_control_deassert(rst);
+
+	i2c_dev->dev = &pdev->dev;
+
+	ret = devm_request_irq(&pdev->dev, irq_event, stm32f7_i2c_isr_event, 0,
+			       pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq event %i\n",
+			irq_event);
+		goto clk_free;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
+			       pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq error %i\n",
+			irq_error);
+		goto clk_free;
+	}
+
+	setup = of_device_get_match_data(&pdev->dev);
+	if (!setup) {
+		dev_err(&pdev->dev, "Can't get device data\n");
+		ret = -ENODEV;
+		goto clk_free;
+	}
+	i2c_dev->setup = *setup;
+
+	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
+				       &rise_time);
+	if (!ret)
+		i2c_dev->setup.rise_time = rise_time;
+
+	ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
+				       &fall_time);
+	if (!ret)
+		i2c_dev->setup.fall_time = fall_time;
+
+	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
+	if (ret)
+		goto clk_free;
+
+	stm32f7_i2c_hw_config(i2c_dev);
+
+	adap = &i2c_dev->adap;
+	i2c_set_adapdata(adap, i2c_dev);
+	snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)",
+		 &res->start);
+	adap->owner = THIS_MODULE;
+	adap->timeout = 2 * HZ;
+	adap->retries = 3;
+	adap->algo = &stm32f7_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		goto clk_free;
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	clk_disable(i2c_dev->clk);
+
+	dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
+
+	return 0;
+
+clk_free:
+	clk_disable_unprepare(i2c_dev->clk);
+
+	return ret;
+}
+
+static int stm32f7_i2c_remove(struct platform_device *pdev)
+{
+	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adap);
+
+	clk_unprepare(i2c_dev->clk);
+
+	return 0;
+}
+
+static const struct of_device_id stm32f7_i2c_match[] = {
+	{ .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup},
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
+
+static struct platform_driver stm32f7_i2c_driver = {
+	.driver = {
+		.name = "stm32f7-i2c",
+		.of_match_table = stm32f7_i2c_match,
+	},
+	.probe = stm32f7_i2c_probe,
+	.remove = stm32f7_i2c_remove,
+};
+
+module_platform_driver(stm32f7_i2c_driver);
+
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32F7 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stu300.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stu300.c
new file mode 100644
index 0000000..dc63236
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-stu300.c
@@ -0,0 +1,1011 @@
+/*
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * ST DDC I2C master mode driver, used in e.g. U300 series platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/* the name of this kernel module */
+#define NAME "stu300"
+
+/* CR (Control Register) 8bit (R/W) */
+#define I2C_CR					(0x00000000)
+#define I2C_CR_RESET_VALUE			(0x00)
+#define I2C_CR_RESET_UMASK			(0x00)
+#define I2C_CR_DDC1_ENABLE			(0x80)
+#define I2C_CR_TRANS_ENABLE			(0x40)
+#define I2C_CR_PERIPHERAL_ENABLE		(0x20)
+#define I2C_CR_DDC2B_ENABLE			(0x10)
+#define I2C_CR_START_ENABLE			(0x08)
+#define I2C_CR_ACK_ENABLE			(0x04)
+#define I2C_CR_STOP_ENABLE			(0x02)
+#define I2C_CR_INTERRUPT_ENABLE			(0x01)
+/* SR1 (Status Register 1) 8bit (R/-) */
+#define I2C_SR1					(0x00000004)
+#define I2C_SR1_RESET_VALUE			(0x00)
+#define I2C_SR1_RESET_UMASK			(0x00)
+#define I2C_SR1_EVF_IND				(0x80)
+#define I2C_SR1_ADD10_IND			(0x40)
+#define I2C_SR1_TRA_IND				(0x20)
+#define I2C_SR1_BUSY_IND			(0x10)
+#define I2C_SR1_BTF_IND				(0x08)
+#define I2C_SR1_ADSL_IND			(0x04)
+#define I2C_SR1_MSL_IND				(0x02)
+#define I2C_SR1_SB_IND				(0x01)
+/* SR2 (Status Register 2) 8bit (R/-) */
+#define I2C_SR2					(0x00000008)
+#define I2C_SR2_RESET_VALUE			(0x00)
+#define I2C_SR2_RESET_UMASK			(0x40)
+#define I2C_SR2_MASK				(0xBF)
+#define I2C_SR2_SCLFAL_IND			(0x80)
+#define I2C_SR2_ENDAD_IND			(0x20)
+#define I2C_SR2_AF_IND				(0x10)
+#define I2C_SR2_STOPF_IND			(0x08)
+#define I2C_SR2_ARLO_IND			(0x04)
+#define I2C_SR2_BERR_IND			(0x02)
+#define I2C_SR2_DDC2BF_IND			(0x01)
+/* CCR (Clock Control Register) 8bit (R/W) */
+#define I2C_CCR					(0x0000000C)
+#define I2C_CCR_RESET_VALUE			(0x00)
+#define I2C_CCR_RESET_UMASK			(0x00)
+#define I2C_CCR_MASK				(0xFF)
+#define I2C_CCR_FMSM				(0x80)
+#define I2C_CCR_CC_MASK				(0x7F)
+/* OAR1 (Own Address Register 1) 8bit (R/W) */
+#define I2C_OAR1				(0x00000010)
+#define I2C_OAR1_RESET_VALUE			(0x00)
+#define I2C_OAR1_RESET_UMASK			(0x00)
+#define I2C_OAR1_ADD_MASK			(0xFF)
+/* OAR2 (Own Address Register 2) 8bit (R/W) */
+#define I2C_OAR2				(0x00000014)
+#define I2C_OAR2_RESET_VALUE			(0x40)
+#define I2C_OAR2_RESET_UMASK			(0x19)
+#define I2C_OAR2_MASK				(0xE6)
+#define I2C_OAR2_FR_25_10MHZ			(0x00)
+#define I2C_OAR2_FR_10_1667MHZ			(0x20)
+#define I2C_OAR2_FR_1667_2667MHZ		(0x40)
+#define I2C_OAR2_FR_2667_40MHZ			(0x60)
+#define I2C_OAR2_FR_40_5333MHZ			(0x80)
+#define I2C_OAR2_FR_5333_66MHZ			(0xA0)
+#define I2C_OAR2_FR_66_80MHZ			(0xC0)
+#define I2C_OAR2_FR_80_100MHZ			(0xE0)
+#define I2C_OAR2_FR_MASK			(0xE0)
+#define I2C_OAR2_ADD_MASK			(0x06)
+/* DR (Data Register) 8bit (R/W) */
+#define I2C_DR					(0x00000018)
+#define I2C_DR_RESET_VALUE			(0x00)
+#define I2C_DR_RESET_UMASK			(0xFF)
+#define I2C_DR_D_MASK				(0xFF)
+/* ECCR (Extended Clock Control Register) 8bit (R/W) */
+#define I2C_ECCR				(0x0000001C)
+#define I2C_ECCR_RESET_VALUE			(0x00)
+#define I2C_ECCR_RESET_UMASK			(0xE0)
+#define I2C_ECCR_MASK				(0x1F)
+#define I2C_ECCR_CC_MASK			(0x1F)
+
+/*
+ * These events are more or less responses to commands
+ * sent into the hardware, presumably reflecting the state
+ * of an internal state machine.
+ */
+enum stu300_event {
+	STU300_EVENT_NONE = 0,
+	STU300_EVENT_1,
+	STU300_EVENT_2,
+	STU300_EVENT_3,
+	STU300_EVENT_4,
+	STU300_EVENT_5,
+	STU300_EVENT_6,
+	STU300_EVENT_7,
+	STU300_EVENT_8,
+	STU300_EVENT_9
+};
+
+enum stu300_error {
+	STU300_ERROR_NONE = 0,
+	STU300_ERROR_ACKNOWLEDGE_FAILURE,
+	STU300_ERROR_BUS_ERROR,
+	STU300_ERROR_ARBITRATION_LOST,
+	STU300_ERROR_UNKNOWN
+};
+
+/* timeout waiting for the controller to respond */
+#define STU300_TIMEOUT (msecs_to_jiffies(1000))
+
+/*
+ * The number of address send athemps tried before giving up.
+ * If the first one failes it seems like 5 to 8 attempts are required.
+ */
+#define NUM_ADDR_RESEND_ATTEMPTS 12
+
+/* I2C clock speed, in Hz 0-400kHz*/
+static unsigned int scl_frequency = 100000;
+module_param(scl_frequency, uint,  0644);
+
+/**
+ * struct stu300_dev - the stu300 driver state holder
+ * @pdev: parent platform device
+ * @adapter: corresponding I2C adapter
+ * @clk: hardware block clock
+ * @irq: assigned interrupt line
+ * @cmd_issue_lock: this locks the following cmd_ variables
+ * @cmd_complete: acknowledge completion for an I2C command
+ * @cmd_event: expected event coming in as a response to a command
+ * @cmd_err: error code as response to a command
+ * @speed: current bus speed in Hz
+ * @msg_index: index of current message
+ * @msg_len: length of current message
+ */
+
+struct stu300_dev {
+	struct platform_device	*pdev;
+	struct i2c_adapter	adapter;
+	void __iomem		*virtbase;
+	struct clk		*clk;
+	int			irq;
+	spinlock_t		cmd_issue_lock;
+	struct completion	cmd_complete;
+	enum stu300_event	cmd_event;
+	enum stu300_error	cmd_err;
+	unsigned int		speed;
+	int			msg_index;
+	int			msg_len;
+};
+
+/* Local forward function declarations */
+static int stu300_init_hw(struct stu300_dev *dev);
+
+/*
+ * The block needs writes in both MSW and LSW in order
+ * for all data lines to reach their destination.
+ */
+static inline void stu300_wr8(u32 value, void __iomem *address)
+{
+	writel((value << 16) | value, address);
+}
+
+/*
+ * This merely masks off the duplicates which appear
+ * in bytes 1-3. You _MUST_ use 32-bit bus access on this
+ * device, else it will not work.
+ */
+static inline u32 stu300_r8(void __iomem *address)
+{
+	return readl(address) & 0x000000FFU;
+}
+
+static void stu300_irq_enable(struct stu300_dev *dev)
+{
+	u32 val;
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val |= I2C_CR_INTERRUPT_ENABLE;
+	/* Twice paranoia (possible HW glitch) */
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+static void stu300_irq_disable(struct stu300_dev *dev)
+{
+	u32 val;
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val &= ~I2C_CR_INTERRUPT_ENABLE;
+	/* Twice paranoia (possible HW glitch) */
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+
+/*
+ * Tells whether a certain event or events occurred in
+ * response to a command. The events represent states in
+ * the internal state machine of the hardware. The events
+ * are not very well described in the hardware
+ * documentation and can only be treated as abstract state
+ * machine states.
+ *
+ * @ret 0 = event has not occurred or unknown error, any
+ * other value means the correct event occurred or an error.
+ */
+
+static int stu300_event_occurred(struct stu300_dev *dev,
+				   enum stu300_event mr_event) {
+	u32 status1;
+	u32 status2;
+
+	/* What event happened? */
+	status1 = stu300_r8(dev->virtbase + I2C_SR1);
+
+	if (!(status1 & I2C_SR1_EVF_IND))
+		/* No event at all */
+		return 0;
+
+	status2 = stu300_r8(dev->virtbase + I2C_SR2);
+
+	/* Block any multiple interrupts */
+	stu300_irq_disable(dev);
+
+	/* Check for errors first */
+	if (status2 & I2C_SR2_AF_IND) {
+		dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+		return 1;
+	} else if (status2 & I2C_SR2_BERR_IND) {
+		dev->cmd_err = STU300_ERROR_BUS_ERROR;
+		return 1;
+	} else if (status2 & I2C_SR2_ARLO_IND) {
+		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+		return 1;
+	}
+
+	switch (mr_event) {
+	case STU300_EVENT_1:
+		if (status1 & I2C_SR1_ADSL_IND)
+			return 1;
+		break;
+	case STU300_EVENT_2:
+	case STU300_EVENT_3:
+	case STU300_EVENT_7:
+	case STU300_EVENT_8:
+		if (status1 & I2C_SR1_BTF_IND) {
+			return 1;
+		}
+		break;
+	case STU300_EVENT_4:
+		if (status2 & I2C_SR2_STOPF_IND)
+			return 1;
+		break;
+	case STU300_EVENT_5:
+		if (status1 & I2C_SR1_SB_IND)
+			/* Clear start bit */
+			return 1;
+		break;
+	case STU300_EVENT_6:
+		if (status2 & I2C_SR2_ENDAD_IND) {
+			/* First check for any errors */
+			return 1;
+		}
+		break;
+	case STU300_EVENT_9:
+		if (status1 & I2C_SR1_ADD10_IND)
+			return 1;
+		break;
+	default:
+		break;
+	}
+	/* If we get here, we're on thin ice.
+	 * Here we are in a status where we have
+	 * gotten a response that does not match
+	 * what we requested.
+	 */
+	dev->cmd_err = STU300_ERROR_UNKNOWN;
+	dev_err(&dev->pdev->dev,
+		"Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",
+		mr_event, status1, status2);
+	return 0;
+}
+
+static irqreturn_t stu300_irh(int irq, void *data)
+{
+	struct stu300_dev *dev = data;
+	int res;
+
+	/* Just make sure that the block is clocked */
+	clk_enable(dev->clk);
+
+	/* See if this was what we were waiting for */
+	spin_lock(&dev->cmd_issue_lock);
+
+	res = stu300_event_occurred(dev, dev->cmd_event);
+	if (res || dev->cmd_err != STU300_ERROR_NONE)
+		complete(&dev->cmd_complete);
+
+	spin_unlock(&dev->cmd_issue_lock);
+
+	clk_disable(dev->clk);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Sends a command and then waits for the bits masked by *flagmask*
+ * to go high or low by IRQ awaiting.
+ */
+static int stu300_start_and_await_event(struct stu300_dev *dev,
+					  u8 cr_value,
+					  enum stu300_event mr_event)
+{
+	int ret;
+
+	if (unlikely(irqs_disabled())) {
+		/* TODO: implement polling for this case if need be. */
+		WARN(1, "irqs are disabled, cannot poll for event\n");
+		return -EIO;
+	}
+
+	/* Lock command issue, fill in an event we wait for */
+	spin_lock_irq(&dev->cmd_issue_lock);
+	init_completion(&dev->cmd_complete);
+	dev->cmd_err = STU300_ERROR_NONE;
+	dev->cmd_event = mr_event;
+	spin_unlock_irq(&dev->cmd_issue_lock);
+
+	/* Turn on interrupt, send command and wait. */
+	cr_value |= I2C_CR_INTERRUPT_ENABLE;
+	stu300_wr8(cr_value, dev->virtbase + I2C_CR);
+	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+							STU300_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&dev->pdev->dev,
+		       "wait_for_completion_interruptible_timeout() "
+		       "returned %d waiting for event %04x\n", ret, mr_event);
+		return ret;
+	}
+
+	if (ret == 0) {
+		dev_err(&dev->pdev->dev, "controller timed out "
+		       "waiting for event %d, reinit hardware\n", mr_event);
+		(void) stu300_init_hw(dev);
+		return -ETIMEDOUT;
+	}
+
+	if (dev->cmd_err != STU300_ERROR_NONE) {
+		dev_err(&dev->pdev->dev, "controller (start) "
+		       "error %d waiting for event %d, reinit hardware\n",
+		       dev->cmd_err, mr_event);
+		(void) stu300_init_hw(dev);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * This waits for a flag to be set, if it is not set on entry, an interrupt is
+ * configured to wait for the flag using a completion.
+ */
+static int stu300_await_event(struct stu300_dev *dev,
+				enum stu300_event mr_event)
+{
+	int ret;
+
+	if (unlikely(irqs_disabled())) {
+		/* TODO: implement polling for this case if need be. */
+		dev_err(&dev->pdev->dev, "irqs are disabled on this "
+			"system!\n");
+		return -EIO;
+	}
+
+	/* Is it already here? */
+	spin_lock_irq(&dev->cmd_issue_lock);
+	dev->cmd_err = STU300_ERROR_NONE;
+	dev->cmd_event = mr_event;
+
+	init_completion(&dev->cmd_complete);
+
+	/* Turn on the I2C interrupt for current operation */
+	stu300_irq_enable(dev);
+
+	/* Unlock the command block and wait for the event to occur */
+	spin_unlock_irq(&dev->cmd_issue_lock);
+
+	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+							STU300_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&dev->pdev->dev,
+		       "wait_for_completion_interruptible_timeout()"
+		       "returned %d waiting for event %04x\n", ret, mr_event);
+		return ret;
+	}
+
+	if (ret == 0) {
+		if (mr_event != STU300_EVENT_6) {
+			dev_err(&dev->pdev->dev, "controller "
+				"timed out waiting for event %d, reinit "
+				"hardware\n", mr_event);
+			(void) stu300_init_hw(dev);
+		}
+		return -ETIMEDOUT;
+	}
+
+	if (dev->cmd_err != STU300_ERROR_NONE) {
+		if (mr_event != STU300_EVENT_6) {
+			dev_err(&dev->pdev->dev, "controller "
+				"error (await_event) %d waiting for event %d, "
+			       "reinit hardware\n", dev->cmd_err, mr_event);
+			(void) stu300_init_hw(dev);
+		}
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * Waits for the busy bit to go low by repeated polling.
+ */
+#define BUSY_RELEASE_ATTEMPTS 10
+static int stu300_wait_while_busy(struct stu300_dev *dev)
+{
+	unsigned long timeout;
+	int i;
+
+	for (i = 0; i < BUSY_RELEASE_ATTEMPTS; i++) {
+		timeout = jiffies + STU300_TIMEOUT;
+
+		while (!time_after(jiffies, timeout)) {
+			/* Is not busy? */
+			if ((stu300_r8(dev->virtbase + I2C_SR1) &
+			     I2C_SR1_BUSY_IND) == 0)
+				return 0;
+			msleep(1);
+		}
+
+		dev_err(&dev->pdev->dev, "transaction timed out "
+			"waiting for device to be free (not busy). "
+		       "Attempt: %d\n", i+1);
+
+		dev_err(&dev->pdev->dev, "base address = "
+			"0x%08x, reinit hardware\n", (u32) dev->virtbase);
+
+		(void) stu300_init_hw(dev);
+	}
+
+	dev_err(&dev->pdev->dev, "giving up after %d attempts "
+		"to reset the bus.\n",  BUSY_RELEASE_ATTEMPTS);
+
+	return -ETIMEDOUT;
+}
+
+struct stu300_clkset {
+	unsigned long rate;
+	u32 setting;
+};
+
+static const struct stu300_clkset stu300_clktable[] = {
+	{ 0,         0xFFU },
+	{ 2500000,   I2C_OAR2_FR_25_10MHZ },
+	{ 10000000,  I2C_OAR2_FR_10_1667MHZ },
+	{ 16670000,  I2C_OAR2_FR_1667_2667MHZ },
+	{ 26670000,  I2C_OAR2_FR_2667_40MHZ },
+	{ 40000000,  I2C_OAR2_FR_40_5333MHZ },
+	{ 53330000,  I2C_OAR2_FR_5333_66MHZ },
+	{ 66000000,  I2C_OAR2_FR_66_80MHZ },
+	{ 80000000,  I2C_OAR2_FR_80_100MHZ },
+	{ 100000000, 0xFFU },
+};
+
+
+static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
+{
+
+	u32 val;
+	int i = 0;
+
+	/* Locate the appropriate clock setting */
+	while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
+	       stu300_clktable[i].rate < clkrate)
+		i++;
+
+	if (stu300_clktable[i].setting == 0xFFU) {
+		dev_err(&dev->pdev->dev, "too %s clock rate requested "
+			"(%lu Hz).\n", i ? "high" : "low", clkrate);
+		return -EINVAL;
+	}
+
+	stu300_wr8(stu300_clktable[i].setting,
+		   dev->virtbase + I2C_OAR2);
+
+	dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
+		"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
+
+	if (dev->speed > 100000)
+		/* Fast Mode I2C */
+		val = ((clkrate/dev->speed) - 9)/3 + 1;
+	else
+		/* Standard Mode I2C */
+		val = ((clkrate/dev->speed) - 7)/2 + 1;
+
+	/* According to spec the divider must be > 2 */
+	if (val < 0x002) {
+		dev_err(&dev->pdev->dev, "too low clock rate (%lu Hz).\n",
+			clkrate);
+		return -EINVAL;
+	}
+
+	/* We have 12 bits clock divider only! */
+	if (val & 0xFFFFF000U) {
+		dev_err(&dev->pdev->dev, "too high clock rate (%lu Hz).\n",
+			clkrate);
+		return -EINVAL;
+	}
+
+	if (dev->speed > 100000) {
+		/* CC6..CC0 */
+		stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
+			   dev->virtbase + I2C_CCR);
+		dev_dbg(&dev->pdev->dev, "set clock divider to 0x%08x, "
+			"Fast Mode I2C\n", val);
+	} else {
+		/* CC6..CC0 */
+		stu300_wr8((val & I2C_CCR_CC_MASK),
+			   dev->virtbase + I2C_CCR);
+		dev_dbg(&dev->pdev->dev, "set clock divider to "
+			"0x%08x, Standard Mode I2C\n", val);
+	}
+
+	/* CC11..CC7 */
+	stu300_wr8(((val >> 7) & 0x1F),
+		   dev->virtbase + I2C_ECCR);
+
+	return 0;
+}
+
+
+static int stu300_init_hw(struct stu300_dev *dev)
+{
+	u32 dummy;
+	unsigned long clkrate;
+	int ret;
+
+	/* Disable controller */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	/*
+	 * Set own address to some default value (0x00).
+	 * We do not support slave mode anyway.
+	 */
+	stu300_wr8(0x00, dev->virtbase + I2C_OAR1);
+	/*
+	 * The I2C controller only operates properly in 26 MHz but we
+	 * program this driver as if we didn't know. This will also set the two
+	 * high bits of the own address to zero as well.
+	 * There is no known hardware issue with running in 13 MHz
+	 * However, speeds over 200 kHz are not used.
+	 */
+	clkrate = clk_get_rate(dev->clk);
+	ret = stu300_set_clk(dev, clkrate);
+
+	if (ret)
+		return ret;
+	/*
+	 * Enable block, do it TWICE (hardware glitch)
+	 * Setting bit 7 can enable DDC mode. (Not used currently.)
+	 */
+	stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
+				  dev->virtbase + I2C_CR);
+	stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
+				  dev->virtbase + I2C_CR);
+	/* Make a dummy read of the status register SR1 & SR2 */
+	dummy = stu300_r8(dev->virtbase + I2C_SR2);
+	dummy = stu300_r8(dev->virtbase + I2C_SR1);
+
+	return 0;
+}
+
+
+
+/* Send slave address. */
+static int stu300_send_address(struct stu300_dev *dev,
+				 struct i2c_msg *msg, int resend)
+{
+	u32 val;
+	int ret;
+
+	if (msg->flags & I2C_M_TEN)
+		/* This is probably how 10 bit addresses look */
+		val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) &
+			I2C_DR_D_MASK;
+	else
+		val = ((msg->addr << 1) & I2C_DR_D_MASK);
+
+	if (msg->flags & I2C_M_RD) {
+		/* This is the direction bit */
+		val |= 0x01;
+		if (resend)
+			dev_dbg(&dev->pdev->dev, "read resend\n");
+	} else if (resend)
+		dev_dbg(&dev->pdev->dev, "write resend\n");
+	stu300_wr8(val, dev->virtbase + I2C_DR);
+
+	/* For 10bit addressing, await 10bit request (EVENT 9) */
+	if (msg->flags & I2C_M_TEN) {
+		ret = stu300_await_event(dev, STU300_EVENT_9);
+		/*
+		 * The slave device wants a 10bit address, send the rest
+		 * of the bits (the LSBits)
+		 */
+		val = msg->addr & I2C_DR_D_MASK;
+		/* This clears "event 9" */
+		stu300_wr8(val, dev->virtbase + I2C_DR);
+		if (ret != 0)
+			return ret;
+	}
+	/* FIXME: Why no else here? two events for 10bit?
+	 * Await event 6 (normal) or event 9 (10bit)
+	 */
+
+	if (resend)
+		dev_dbg(&dev->pdev->dev, "await event 6\n");
+	ret = stu300_await_event(dev, STU300_EVENT_6);
+
+	/*
+	 * Clear any pending EVENT 6 no matter what happened during
+	 * await_event.
+	 */
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val |= I2C_CR_PERIPHERAL_ENABLE;
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+
+	return ret;
+}
+
+static int stu300_xfer_msg(struct i2c_adapter *adap,
+			     struct i2c_msg *msg, int stop)
+{
+	u32 cr;
+	u32 val;
+	u32 i;
+	int ret;
+	int attempts = 0;
+	struct stu300_dev *dev = i2c_get_adapdata(adap);
+
+	clk_enable(dev->clk);
+
+	/* Remove this if (0) to trace each and every message. */
+	if (0) {
+		dev_dbg(&dev->pdev->dev, "I2C message to: 0x%04x, len: %d, "
+			"flags: 0x%04x, stop: %d\n",
+			msg->addr, msg->len, msg->flags, stop);
+	}
+
+	/* Zero-length messages are not supported by this hardware */
+	if (msg->len == 0) {
+		ret = -EINVAL;
+		goto exit_disable;
+	}
+
+	/*
+	 * For some reason, sending the address sometimes fails when running
+	 * on  the 13 MHz clock. No interrupt arrives. This is a work around,
+	 * which tries to restart and send the address up to 10 times before
+	 * really giving up. Usually 5 to 8 attempts are enough.
+	 */
+	do {
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "wait while busy\n");
+		/* Check that the bus is free, or wait until some timeout */
+		ret = stu300_wait_while_busy(dev);
+		if (ret != 0)
+			goto exit_disable;
+
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "re-int hw\n");
+		/*
+		 * According to ST, there is no problem if the clock is
+		 * changed between 13 and 26 MHz during a transfer.
+		 */
+		ret = stu300_init_hw(dev);
+		if (ret)
+			goto exit_disable;
+
+		/* Send a start condition */
+		cr = I2C_CR_PERIPHERAL_ENABLE;
+		/* Setting the START bit puts the block in master mode */
+		if (!(msg->flags & I2C_M_NOSTART))
+			cr |= I2C_CR_START_ENABLE;
+		if ((msg->flags & I2C_M_RD) && (msg->len > 1))
+			/* On read more than 1 byte, we need ack. */
+			cr |= I2C_CR_ACK_ENABLE;
+		/* Check that it gets through */
+		if (!(msg->flags & I2C_M_NOSTART)) {
+			if (attempts)
+				dev_dbg(&dev->pdev->dev, "send start event\n");
+			ret = stu300_start_and_await_event(dev, cr,
+							     STU300_EVENT_5);
+		}
+
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "send address\n");
+
+		if (ret == 0)
+			/* Send address */
+			ret = stu300_send_address(dev, msg, attempts != 0);
+
+		if (ret != 0) {
+			attempts++;
+			dev_dbg(&dev->pdev->dev, "failed sending address, "
+				"retrying. Attempt: %d msg_index: %d/%d\n",
+			       attempts, dev->msg_index, dev->msg_len);
+		}
+
+	} while (ret != 0 && attempts < NUM_ADDR_RESEND_ATTEMPTS);
+
+	if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
+		dev_dbg(&dev->pdev->dev, "managed to get address "
+			"through after %d attempts\n", attempts);
+	} else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
+		dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
+			"to resend address.\n",
+			NUM_ADDR_RESEND_ATTEMPTS);
+		goto exit_disable;
+	}
+
+
+	if (msg->flags & I2C_M_RD) {
+		/* READ: we read the actual bytes one at a time */
+		for (i = 0; i < msg->len; i++) {
+			if (i == msg->len-1) {
+				/*
+				 * Disable ACK and set STOP condition before
+				 * reading last byte
+				 */
+				val = I2C_CR_PERIPHERAL_ENABLE;
+
+				if (stop)
+					val |= I2C_CR_STOP_ENABLE;
+
+				stu300_wr8(val,
+					   dev->virtbase + I2C_CR);
+			}
+			/* Wait for this byte... */
+			ret = stu300_await_event(dev, STU300_EVENT_7);
+			if (ret != 0)
+				goto exit_disable;
+			/* This clears event 7 */
+			msg->buf[i] = (u8) stu300_r8(dev->virtbase + I2C_DR);
+		}
+	} else {
+		/* WRITE: we send the actual bytes one at a time */
+		for (i = 0; i < msg->len; i++) {
+			/* Write the byte */
+			stu300_wr8(msg->buf[i],
+				   dev->virtbase + I2C_DR);
+			/* Check status */
+			ret = stu300_await_event(dev, STU300_EVENT_8);
+			/* Next write to DR will clear event 8 */
+			if (ret != 0) {
+				dev_err(&dev->pdev->dev, "error awaiting "
+				       "event 8 (%d)\n", ret);
+				goto exit_disable;
+			}
+		}
+		/* Check NAK */
+		if (!(msg->flags & I2C_M_IGNORE_NAK)) {
+			if (stu300_r8(dev->virtbase + I2C_SR2) &
+			    I2C_SR2_AF_IND) {
+				dev_err(&dev->pdev->dev, "I2C payload "
+				       "send returned NAK!\n");
+				ret = -EIO;
+				goto exit_disable;
+			}
+		}
+		if (stop) {
+			/* Send stop condition */
+			val = I2C_CR_PERIPHERAL_ENABLE;
+			val |= I2C_CR_STOP_ENABLE;
+			stu300_wr8(val, dev->virtbase + I2C_CR);
+		}
+	}
+
+	/* Check that the bus is free, or wait until some timeout occurs */
+	ret = stu300_wait_while_busy(dev);
+	if (ret != 0) {
+		dev_err(&dev->pdev->dev, "timeout waiting for transfer "
+		       "to commence.\n");
+		goto exit_disable;
+	}
+
+	/* Dummy read status registers */
+	val = stu300_r8(dev->virtbase + I2C_SR2);
+	val = stu300_r8(dev->virtbase + I2C_SR1);
+	ret = 0;
+
+ exit_disable:
+	/* Disable controller */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	clk_disable(dev->clk);
+	return ret;
+}
+
+static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			 int num)
+{
+	int ret = -1;
+	int i;
+
+	struct stu300_dev *dev = i2c_get_adapdata(adap);
+	dev->msg_len = num;
+
+	for (i = 0; i < num; i++) {
+		/*
+		 * Another driver appears to send stop for each message,
+		 * here we only do that for the last message. Possibly some
+		 * peripherals require this behaviour, then their drivers
+		 * have to send single messages in order to get "stop" for
+		 * each message.
+		 */
+		dev->msg_index = i;
+
+		ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+
+		if (ret != 0) {
+			num = ret;
+			break;
+		}
+	}
+
+	return num;
+}
+
+static u32 stu300_func(struct i2c_adapter *adap)
+{
+	/* This is the simplest thing you can think of... */
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm stu300_algo = {
+	.master_xfer	= stu300_xfer,
+	.functionality	= stu300_func,
+};
+
+static int stu300_probe(struct platform_device *pdev)
+{
+	struct stu300_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int bus_nr;
+	int ret = 0;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	bus_nr = pdev->id;
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
+		return PTR_ERR(dev->clk);
+	}
+
+	dev->pdev = pdev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->virtbase = devm_ioremap_resource(&pdev->dev, res);
+	dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
+		"base %p\n", bus_nr, dev->virtbase);
+	if (IS_ERR(dev->virtbase))
+		return PTR_ERR(dev->virtbase);
+
+	dev->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev);
+	if (ret < 0)
+		return ret;
+
+	dev->speed = scl_frequency;
+
+	clk_prepare_enable(dev->clk);
+	ret = stu300_init_hw(dev);
+	clk_disable(dev->clk);
+	if (ret != 0) {
+		dev_err(&dev->pdev->dev, "error initializing hardware.\n");
+		return -EIO;
+	}
+
+	/* IRQ event handling initialization */
+	spin_lock_init(&dev->cmd_issue_lock);
+	dev->cmd_event = STU300_EVENT_NONE;
+	dev->cmd_err = STU300_ERROR_NONE;
+
+	adap = &dev->adapter;
+	adap->owner = THIS_MODULE;
+	/* DDC class but actually often used for more generic I2C */
+	adap->class = I2C_CLASS_DEPRECATED;
+	strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
+		sizeof(adap->name));
+	adap->nr = bus_nr;
+	adap->algo = &stu300_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+	i2c_set_adapdata(adap, dev);
+
+	/* i2c device drivers may be active on return from add_adapter() */
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
+		 dev->virtbase, dev->irq);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stu300_suspend(struct device *device)
+{
+	struct stu300_dev *dev = dev_get_drvdata(device);
+
+	/* Turn off everything */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	return 0;
+}
+
+static int stu300_resume(struct device *device)
+{
+	int ret = 0;
+	struct stu300_dev *dev = dev_get_drvdata(device);
+
+	clk_enable(dev->clk);
+	ret = stu300_init_hw(dev);
+	clk_disable(dev->clk);
+
+	if (ret != 0)
+		dev_err(device, "error re-initializing hardware.\n");
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
+#define STU300_I2C_PM	(&stu300_pm)
+#else
+#define STU300_I2C_PM	NULL
+#endif
+
+static int stu300_remove(struct platform_device *pdev)
+{
+	struct stu300_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+	/* Turn off everything */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	return 0;
+}
+
+static const struct of_device_id stu300_dt_match[] = {
+	{ .compatible = "st,ddci2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stu300_dt_match);
+
+static struct platform_driver stu300_i2c_driver = {
+	.driver = {
+		.name	= NAME,
+		.pm	= STU300_I2C_PM,
+		.of_match_table = stu300_dt_match,
+	},
+	.probe = stu300_probe,
+	.remove = stu300_remove,
+
+};
+
+static int __init stu300_init(void)
+{
+	return platform_driver_register(&stu300_i2c_driver);
+}
+
+static void __exit stu300_exit(void)
+{
+	platform_driver_unregister(&stu300_i2c_driver);
+}
+
+/*
+ * The systems using this bus often have very basic devices such
+ * as regulators on the I2C bus, so this needs to be loaded early.
+ * Therefore it is registered in the subsys_initcall().
+ */
+subsys_initcall(stu300_init);
+module_exit(stu300_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("ST Micro DDC I2C adapter (" NAME ")");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sun6i-p2wi.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sun6i-p2wi.c
new file mode 100644
index 0000000..7c07ce1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -0,0 +1,343 @@
+/*
+ * P2WI (Push-Pull Two Wire Interface) bus driver.
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * The P2WI controller looks like an SMBus controller which only supports byte
+ * data transfers. But, it differs from standard SMBus protocol on several
+ * aspects:
+ * - it supports only one slave device, and thus drop the address field
+ * - it adds a parity bit every 8bits of data
+ * - only one read access is required to read a byte (instead of a write
+ *   followed by a read access in standard SMBus protocol)
+ * - there's no Ack bit after each byte transfer
+ *
+ * This means this bus cannot be used to interface with standard SMBus
+ * devices (the only known device to support this interface is the AXP221
+ * PMIC).
+ *
+ */
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+
+/* P2WI registers */
+#define P2WI_CTRL		0x0
+#define P2WI_CCR		0x4
+#define P2WI_INTE		0x8
+#define P2WI_INTS		0xc
+#define P2WI_DADDR0		0x10
+#define P2WI_DADDR1		0x14
+#define P2WI_DLEN		0x18
+#define P2WI_DATA0		0x1c
+#define P2WI_DATA1		0x20
+#define P2WI_LCR		0x24
+#define P2WI_PMCR		0x28
+
+/* CTRL fields */
+#define P2WI_CTRL_START_TRANS		BIT(7)
+#define P2WI_CTRL_ABORT_TRANS		BIT(6)
+#define P2WI_CTRL_GLOBAL_INT_ENB	BIT(1)
+#define P2WI_CTRL_SOFT_RST		BIT(0)
+
+/* CLK CTRL fields */
+#define P2WI_CCR_SDA_OUT_DELAY(v)	(((v) & 0x7) << 8)
+#define P2WI_CCR_MAX_CLK_DIV		0xff
+#define P2WI_CCR_CLK_DIV(v)		((v) & P2WI_CCR_MAX_CLK_DIV)
+
+/* STATUS fields */
+#define P2WI_INTS_TRANS_ERR_ID(v)	(((v) >> 8) & 0xff)
+#define P2WI_INTS_LOAD_BSY		BIT(2)
+#define P2WI_INTS_TRANS_ERR		BIT(1)
+#define P2WI_INTS_TRANS_OVER		BIT(0)
+
+/* DATA LENGTH fields*/
+#define P2WI_DLEN_READ			BIT(4)
+#define P2WI_DLEN_DATA_LENGTH(v)	((v - 1) & 0x7)
+
+/* LINE CTRL fields*/
+#define P2WI_LCR_SCL_STATE		BIT(5)
+#define P2WI_LCR_SDA_STATE		BIT(4)
+#define P2WI_LCR_SCL_CTL		BIT(3)
+#define P2WI_LCR_SCL_CTL_EN		BIT(2)
+#define P2WI_LCR_SDA_CTL		BIT(1)
+#define P2WI_LCR_SDA_CTL_EN		BIT(0)
+
+/* PMU MODE CTRL fields */
+#define P2WI_PMCR_PMU_INIT_SEND		BIT(31)
+#define P2WI_PMCR_PMU_INIT_DATA(v)	(((v) & 0xff) << 16)
+#define P2WI_PMCR_PMU_MODE_REG(v)	(((v) & 0xff) << 8)
+#define P2WI_PMCR_PMU_DEV_ADDR(v)	((v) & 0xff)
+
+#define P2WI_MAX_FREQ			6000000
+
+struct p2wi {
+	struct i2c_adapter adapter;
+	struct completion complete;
+	unsigned int status;
+	void __iomem *regs;
+	struct clk *clk;
+	struct reset_control *rstc;
+	int slave_addr;
+};
+
+static irqreturn_t p2wi_interrupt(int irq, void *dev_id)
+{
+	struct p2wi *p2wi = dev_id;
+	unsigned long status;
+
+	status = readl(p2wi->regs + P2WI_INTS);
+	p2wi->status = status;
+
+	/* Clear interrupts */
+	status &= (P2WI_INTS_LOAD_BSY | P2WI_INTS_TRANS_ERR |
+		   P2WI_INTS_TRANS_OVER);
+	writel(status, p2wi->regs + P2WI_INTS);
+
+	complete(&p2wi->complete);
+
+	return IRQ_HANDLED;
+}
+
+static u32 p2wi_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static int p2wi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			   unsigned short flags, char read_write,
+			   u8 command, int size, union i2c_smbus_data *data)
+{
+	struct p2wi *p2wi = i2c_get_adapdata(adap);
+	unsigned long dlen = P2WI_DLEN_DATA_LENGTH(1);
+
+	if (p2wi->slave_addr >= 0 && addr != p2wi->slave_addr) {
+		dev_err(&adap->dev, "invalid P2WI address\n");
+		return -EINVAL;
+	}
+
+	if (!data)
+		return -EINVAL;
+
+	writel(command, p2wi->regs + P2WI_DADDR0);
+
+	if (read_write == I2C_SMBUS_READ)
+		dlen |= P2WI_DLEN_READ;
+	else
+		writel(data->byte, p2wi->regs + P2WI_DATA0);
+
+	writel(dlen, p2wi->regs + P2WI_DLEN);
+
+	if (readl(p2wi->regs + P2WI_CTRL) & P2WI_CTRL_START_TRANS) {
+		dev_err(&adap->dev, "P2WI bus busy\n");
+		return -EBUSY;
+	}
+
+	reinit_completion(&p2wi->complete);
+
+	writel(P2WI_INTS_LOAD_BSY | P2WI_INTS_TRANS_ERR | P2WI_INTS_TRANS_OVER,
+	       p2wi->regs + P2WI_INTE);
+
+	writel(P2WI_CTRL_START_TRANS | P2WI_CTRL_GLOBAL_INT_ENB,
+	       p2wi->regs + P2WI_CTRL);
+
+	wait_for_completion(&p2wi->complete);
+
+	if (p2wi->status & P2WI_INTS_LOAD_BSY) {
+		dev_err(&adap->dev, "P2WI bus busy\n");
+		return -EBUSY;
+	}
+
+	if (p2wi->status & P2WI_INTS_TRANS_ERR) {
+		dev_err(&adap->dev, "P2WI bus xfer error\n");
+		return -ENXIO;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		data->byte = readl(p2wi->regs + P2WI_DATA0);
+
+	return 0;
+}
+
+static const struct i2c_algorithm p2wi_algo = {
+	.smbus_xfer = p2wi_smbus_xfer,
+	.functionality = p2wi_functionality,
+};
+
+static const struct of_device_id p2wi_of_match_table[] = {
+	{ .compatible = "allwinner,sun6i-a31-p2wi" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, p2wi_of_match_table);
+
+static int p2wi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *childnp;
+	unsigned long parent_clk_freq;
+	u32 clk_freq = 100000;
+	struct resource *r;
+	struct p2wi *p2wi;
+	u32 slave_addr;
+	int clk_div;
+	int irq;
+	int ret;
+
+	of_property_read_u32(np, "clock-frequency", &clk_freq);
+	if (clk_freq > P2WI_MAX_FREQ) {
+		dev_err(dev,
+			"required clock-frequency (%u Hz) is too high (max = 6MHz)",
+			clk_freq);
+		return -EINVAL;
+	}
+
+	if (of_get_child_count(np) > 1) {
+		dev_err(dev, "P2WI only supports one slave device\n");
+		return -EINVAL;
+	}
+
+	p2wi = devm_kzalloc(dev, sizeof(struct p2wi), GFP_KERNEL);
+	if (!p2wi)
+		return -ENOMEM;
+
+	p2wi->slave_addr = -1;
+
+	/*
+	 * Authorize a p2wi node without any children to be able to use an
+	 * i2c-dev from userpace.
+	 * In this case the slave_addr is set to -1 and won't be checked when
+	 * launching a P2WI transfer.
+	 */
+	childnp = of_get_next_available_child(np, NULL);
+	if (childnp) {
+		ret = of_property_read_u32(childnp, "reg", &slave_addr);
+		if (ret) {
+			dev_err(dev, "invalid slave address on node %pOF\n",
+				childnp);
+			return -EINVAL;
+		}
+
+		p2wi->slave_addr = slave_addr;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	p2wi->regs = devm_ioremap_resource(dev, r);
+	if (IS_ERR(p2wi->regs))
+		return PTR_ERR(p2wi->regs);
+
+	strlcpy(p2wi->adapter.name, pdev->name, sizeof(p2wi->adapter.name));
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to retrieve irq: %d\n", irq);
+		return irq;
+	}
+
+	p2wi->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(p2wi->clk)) {
+		ret = PTR_ERR(p2wi->clk);
+		dev_err(dev, "failed to retrieve clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(p2wi->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clk: %d\n", ret);
+		return ret;
+	}
+
+	parent_clk_freq = clk_get_rate(p2wi->clk);
+
+	p2wi->rstc = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(p2wi->rstc)) {
+		ret = PTR_ERR(p2wi->rstc);
+		dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
+		goto err_clk_disable;
+	}
+
+	ret = reset_control_deassert(p2wi->rstc);
+	if (ret) {
+		dev_err(dev, "failed to deassert reset line: %d\n", ret);
+		goto err_clk_disable;
+	}
+
+	init_completion(&p2wi->complete);
+	p2wi->adapter.dev.parent = dev;
+	p2wi->adapter.algo = &p2wi_algo;
+	p2wi->adapter.owner = THIS_MODULE;
+	p2wi->adapter.dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, p2wi);
+	i2c_set_adapdata(&p2wi->adapter, p2wi);
+
+	ret = devm_request_irq(dev, irq, p2wi_interrupt, 0, pdev->name, p2wi);
+	if (ret) {
+		dev_err(dev, "can't register interrupt handler irq%d: %d\n",
+			irq, ret);
+		goto err_reset_assert;
+	}
+
+	writel(P2WI_CTRL_SOFT_RST, p2wi->regs + P2WI_CTRL);
+
+	clk_div = parent_clk_freq / clk_freq;
+	if (!clk_div) {
+		dev_warn(dev,
+			 "clock-frequency is too high, setting it to %lu Hz\n",
+			 parent_clk_freq);
+		clk_div = 1;
+	} else if (clk_div > P2WI_CCR_MAX_CLK_DIV) {
+		dev_warn(dev,
+			 "clock-frequency is too low, setting it to %lu Hz\n",
+			 parent_clk_freq / P2WI_CCR_MAX_CLK_DIV);
+		clk_div = P2WI_CCR_MAX_CLK_DIV;
+	}
+
+	writel(P2WI_CCR_SDA_OUT_DELAY(1) | P2WI_CCR_CLK_DIV(clk_div),
+	       p2wi->regs + P2WI_CCR);
+
+	ret = i2c_add_adapter(&p2wi->adapter);
+	if (!ret)
+		return 0;
+
+err_reset_assert:
+	reset_control_assert(p2wi->rstc);
+
+err_clk_disable:
+	clk_disable_unprepare(p2wi->clk);
+
+	return ret;
+}
+
+static int p2wi_remove(struct platform_device *dev)
+{
+	struct p2wi *p2wi = platform_get_drvdata(dev);
+
+	reset_control_assert(p2wi->rstc);
+	clk_disable_unprepare(p2wi->clk);
+	i2c_del_adapter(&p2wi->adapter);
+
+	return 0;
+}
+
+static struct platform_driver p2wi_driver = {
+	.probe	= p2wi_probe,
+	.remove	= p2wi_remove,
+	.driver	= {
+		.name = "i2c-sunxi-p2wi",
+		.of_match_table = p2wi_of_match_table,
+	},
+};
+module_platform_driver(p2wi_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner P2WI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-taos-evm.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-taos-evm.c
new file mode 100644
index 0000000..addd90a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-taos-evm.c
@@ -0,0 +1,320 @@
+/*
+ * Driver for the TAOS evaluation modules
+ * These devices include an I2C master which can be controlled over the
+ * serial port.
+ *
+ * Copyright (C) 2007 Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#define TAOS_BUFFER_SIZE	63
+
+#define TAOS_STATE_INIT		0
+#define TAOS_STATE_IDLE		1
+#define TAOS_STATE_EOFF		2
+#define TAOS_STATE_RECV		3
+
+#define TAOS_CMD_RESET		0x12
+#define TAOS_CMD_ECHO_ON	'+'
+#define TAOS_CMD_ECHO_OFF	'-'
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+struct taos_data {
+	struct i2c_adapter adapter;
+	struct i2c_client *client;
+	int state;
+	u8 addr;		/* last used address */
+	unsigned char buffer[TAOS_BUFFER_SIZE];
+	unsigned int pos;	/* position inside the buffer */
+};
+
+/* TAOS TSL2550 EVM */
+static struct i2c_board_info tsl2550_info = {
+	I2C_BOARD_INFO("tsl2550", 0x39),
+};
+
+/* Instantiate i2c devices based on the adapter name */
+static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
+{
+	if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
+		dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
+			tsl2550_info.type, tsl2550_info.addr);
+		return i2c_new_device(adapter, &tsl2550_info);
+	}
+
+	return NULL;
+}
+
+static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			   unsigned short flags, char read_write, u8 command,
+			   int size, union i2c_smbus_data *data)
+{
+	struct serio *serio = adapter->algo_data;
+	struct taos_data *taos = serio_get_drvdata(serio);
+	char *p;
+
+	/* Encode our transaction. "@" is for the device address, "$" for the
+	   SMBus command and "#" for the data. */
+	p = taos->buffer;
+
+	/* The device remembers the last used address, no need to send it
+	   again if it's the same */
+	if (addr != taos->addr)
+		p += sprintf(p, "@%02X", addr);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$#%02X", command);
+		else
+			sprintf(p, "$");
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$%02X#%02X", command, data->byte);
+		else
+			sprintf(p, "$%02X", command);
+		break;
+	default:
+		dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	/* Send the transaction to the TAOS EVM */
+	dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
+	for (p = taos->buffer; *p; p++)
+		serio_write(serio, *p);
+
+	taos->addr = addr;
+
+	/* Start the transaction and read the answer */
+	taos->pos = 0;
+	taos->state = TAOS_STATE_RECV;
+	serio_write(serio, read_write == I2C_SMBUS_WRITE ? '>' : '<');
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(150));
+	if (taos->state != TAOS_STATE_IDLE
+	 || taos->pos != 5) {
+		dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
+			taos->pos);
+		return -EIO;
+	}
+	dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
+
+	/* Interpret the returned string */
+	p = taos->buffer + 1;
+	p[3] = '\0';
+	if (!strcmp(p, "NAK"))
+		return -ENODEV;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		if (!strcmp(p, "ACK"))
+			return 0;
+	} else {
+		if (p[0] == 'x') {
+			/*
+			 * Voluntarily dropping error code of kstrtou8 since all
+			 * error code that it could return are invalid according
+			 * to Documentation/i2c/fault-codes.
+			 */
+			if (kstrtou8(p + 1, 16, &data->byte))
+				return -EPROTO;
+			return 0;
+		}
+	}
+
+	return -EIO;
+}
+
+static u32 taos_smbus_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm taos_algorithm = {
+	.smbus_xfer	= taos_smbus_xfer,
+	.functionality	= taos_smbus_func,
+};
+
+static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
+				  unsigned int flags)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	switch (taos->state) {
+	case TAOS_STATE_INIT:
+		taos->buffer[taos->pos++] = data;
+		if (data == ':'
+		 || taos->pos == TAOS_BUFFER_SIZE - 1) {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	case TAOS_STATE_EOFF:
+		taos->state = TAOS_STATE_IDLE;
+		wake_up_interruptible(&wq);
+		break;
+	case TAOS_STATE_RECV:
+		taos->buffer[taos->pos++] = data;
+		if (data == ']') {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Extract the adapter name from the buffer received after reset.
+   The buffer is modified and a pointer inside the buffer is returned. */
+static char *taos_adapter_name(char *buffer)
+{
+	char *start, *end;
+
+	start = strstr(buffer, "TAOS ");
+	if (!start)
+		return NULL;
+
+	end = strchr(start, '\r');
+	if (!end)
+		return NULL;
+	*end = '\0';
+
+	return start;
+}
+
+static int taos_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct taos_data *taos;
+	struct i2c_adapter *adapter;
+	char *name;
+	int err;
+
+	taos = kzalloc(sizeof(struct taos_data), GFP_KERNEL);
+	if (!taos) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	taos->state = TAOS_STATE_INIT;
+	serio_set_drvdata(serio, taos);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto exit_kfree;
+
+	adapter = &taos->adapter;
+	adapter->owner = THIS_MODULE;
+	adapter->algo = &taos_algorithm;
+	adapter->algo_data = serio;
+	adapter->dev.parent = &serio->dev;
+
+	/* Reset the TAOS evaluation module to identify it */
+	serio_write(serio, TAOS_CMD_RESET);
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(2000));
+
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, "
+			"pos=%d)\n", taos->state, taos->pos);
+		goto exit_close;
+	}
+
+	name = taos_adapter_name(taos->buffer);
+	if (!name) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM identification failed\n");
+		goto exit_close;
+	}
+	strlcpy(adapter->name, name, sizeof(adapter->name));
+
+	/* Turn echo off for better performance */
+	taos->state = TAOS_STATE_EOFF;
+	serio_write(serio, TAOS_CMD_ECHO_OFF);
+
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(250));
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM echo off failed "
+			"(state=%d)\n", taos->state);
+		goto exit_close;
+	}
+
+	err = i2c_add_adapter(adapter);
+	if (err)
+		goto exit_close;
+	dev_info(&serio->dev, "Connected to TAOS EVM\n");
+
+	taos->client = taos_instantiate_device(adapter);
+	return 0;
+
+ exit_close:
+	serio_close(serio);
+ exit_kfree:
+	kfree(taos);
+ exit:
+	return err;
+}
+
+static void taos_disconnect(struct serio *serio)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	if (taos->client)
+		i2c_unregister_device(taos->client);
+	i2c_del_adapter(&taos->adapter);
+	serio_close(serio);
+	kfree(taos);
+
+	dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
+}
+
+static const struct serio_device_id taos_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TAOSEVM,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(serio, taos_serio_ids);
+
+static struct serio_driver taos_drv = {
+	.driver		= {
+		.name	= "taos-evm",
+	},
+	.description	= "TAOS evaluation module driver",
+	.id_table	= taos_serio_ids,
+	.connect	= taos_connect,
+	.disconnect	= taos_disconnect,
+	.interrupt	= taos_interrupt,
+};
+
+module_serio_driver(taos_drv);
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("TAOS evaluation module driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra-bpmp.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra-bpmp.c
new file mode 100644
index 0000000..f6cd35d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra-bpmp.c
@@ -0,0 +1,346 @@
+/*
+ * drivers/i2c/busses/i2c-tegra-bpmp.c
+ *
+ * Copyright (c) 2016 NVIDIA Corporation.  All rights reserved.
+ *
+ * Author: Shardar Shariff Md <smohammed@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <soc/tegra/bpmp-abi.h>
+#include <soc/tegra/bpmp.h>
+
+/*
+ * Serialized I2C message header size is 6 bytes and includes address, flags
+ * and length
+ */
+#define SERIALI2C_HDR_SIZE 6
+
+struct tegra_bpmp_i2c {
+	struct i2c_adapter adapter;
+	struct device *dev;
+
+	struct tegra_bpmp *bpmp;
+	unsigned int bus;
+};
+
+/*
+ * Linux flags are translated to BPMP defined I2C flags that are used in BPMP
+ * firmware I2C driver to avoid any issues in future if Linux I2C flags are
+ * changed.
+ */
+static int tegra_bpmp_xlate_flags(u16 flags, u16 *out)
+{
+	if (flags & I2C_M_TEN) {
+		*out |= SERIALI2C_TEN;
+		flags &= ~I2C_M_TEN;
+	}
+
+	if (flags & I2C_M_RD) {
+		*out |= SERIALI2C_RD;
+		flags &= ~I2C_M_RD;
+	}
+
+	if (flags & I2C_M_STOP) {
+		*out |= SERIALI2C_STOP;
+		flags &= ~I2C_M_STOP;
+	}
+
+	if (flags & I2C_M_NOSTART) {
+		*out |= SERIALI2C_NOSTART;
+		flags &= ~I2C_M_NOSTART;
+	}
+
+	if (flags & I2C_M_REV_DIR_ADDR) {
+		*out |= SERIALI2C_REV_DIR_ADDR;
+		flags &= ~I2C_M_REV_DIR_ADDR;
+	}
+
+	if (flags & I2C_M_IGNORE_NAK) {
+		*out |= SERIALI2C_IGNORE_NAK;
+		flags &= ~I2C_M_IGNORE_NAK;
+	}
+
+	if (flags & I2C_M_NO_RD_ACK) {
+		*out |= SERIALI2C_NO_RD_ACK;
+		flags &= ~I2C_M_NO_RD_ACK;
+	}
+
+	if (flags & I2C_M_RECV_LEN) {
+		*out |= SERIALI2C_RECV_LEN;
+		flags &= ~I2C_M_RECV_LEN;
+	}
+
+	return (flags != 0) ? -EINVAL : 0;
+}
+
+/**
+ * The serialized I2C format is simply the following:
+ * [addr little-endian][flags little-endian][len little-endian][data if write]
+ * [addr little-endian][flags little-endian][len little-endian][data if write]
+ *  ...
+ *
+ * The flags are translated from Linux kernel representation to seriali2c
+ * representation. Any undefined flag being set causes an error.
+ *
+ * The data is there only for writes. Reads have the data transferred in the
+ * other direction, and thus data is not present.
+ *
+ * See deserialize_i2c documentation for the data format in the other direction.
+ */
+static int tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c,
+					struct mrq_i2c_request *request,
+					struct i2c_msg *msgs,
+					unsigned int num)
+{
+	char *buf = request->xfer.data_buf;
+	unsigned int i, j, pos = 0;
+	int err;
+
+	for (i = 0; i < num; i++) {
+		struct i2c_msg *msg = &msgs[i];
+		u16 flags = 0;
+
+		err = tegra_bpmp_xlate_flags(msg->flags, &flags);
+		if (err < 0)
+			return err;
+
+		buf[pos++] = msg->addr & 0xff;
+		buf[pos++] = (msg->addr & 0xff00) >> 8;
+		buf[pos++] = flags & 0xff;
+		buf[pos++] = (flags & 0xff00) >> 8;
+		buf[pos++] = msg->len & 0xff;
+		buf[pos++] = (msg->len & 0xff00) >> 8;
+
+		if ((flags & SERIALI2C_RD) == 0) {
+			for (j = 0; j < msg->len; j++)
+				buf[pos++] = msg->buf[j];
+		}
+	}
+
+	request->xfer.data_size = pos;
+
+	return 0;
+}
+
+/**
+ * The data in the BPMP -> CPU direction is composed of sequential blocks for
+ * those messages that have I2C_M_RD. So, for example, if you have:
+ *
+ * - !I2C_M_RD, len == 5, data == a0 01 02 03 04
+ * - !I2C_M_RD, len == 1, data == a0
+ * - I2C_M_RD, len == 2, data == [uninitialized buffer 1]
+ * - !I2C_M_RD, len == 1, data == a2
+ * - I2C_M_RD, len == 2, data == [uninitialized buffer 2]
+ *
+ * ...then the data in the BPMP -> CPU direction would be 4 bytes total, and
+ * would contain 2 bytes that will go to uninitialized buffer 1, and 2 bytes
+ * that will go to uninitialized buffer 2.
+ */
+static int tegra_bpmp_i2c_deserialize(struct tegra_bpmp_i2c *i2c,
+				      struct mrq_i2c_response *response,
+				      struct i2c_msg *msgs,
+				      unsigned int num)
+{
+	size_t size = response->xfer.data_size, len = 0, pos = 0;
+	char *buf = response->xfer.data_buf;
+	unsigned int i;
+
+	for (i = 0; i < num; i++)
+		if (msgs[i].flags & I2C_M_RD)
+			len += msgs[i].len;
+
+	if (len != size)
+		return -EINVAL;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD) {
+			memcpy(msgs[i].buf, buf + pos, msgs[i].len);
+			pos += msgs[i].len;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_bpmp_i2c_msg_len_check(struct i2c_msg *msgs, unsigned int num)
+{
+	size_t tx_len = 0, rx_len = 0;
+	unsigned int i;
+
+	for (i = 0; i < num; i++)
+		if (!(msgs[i].flags & I2C_M_RD))
+			tx_len += SERIALI2C_HDR_SIZE + msgs[i].len;
+
+	if (tx_len > TEGRA_I2C_IPC_MAX_IN_BUF_SIZE)
+		return -EINVAL;
+
+	for (i = 0; i < num; i++)
+		if ((msgs[i].flags & I2C_M_RD))
+			rx_len += msgs[i].len;
+
+	if (rx_len > TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int tegra_bpmp_i2c_msg_xfer(struct tegra_bpmp_i2c *i2c,
+				   struct mrq_i2c_request *request,
+				   struct mrq_i2c_response *response)
+{
+	struct tegra_bpmp_message msg;
+	int err;
+
+	request->cmd = CMD_I2C_XFER;
+	request->xfer.bus_id = i2c->bus;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_I2C;
+	msg.tx.data = request;
+	msg.tx.size = sizeof(*request);
+	msg.rx.data = response;
+	msg.rx.size = sizeof(*response);
+
+	if (irqs_disabled())
+		err = tegra_bpmp_transfer_atomic(i2c->bpmp, &msg);
+	else
+		err = tegra_bpmp_transfer(i2c->bpmp, &msg);
+
+	return err;
+}
+
+static int tegra_bpmp_i2c_xfer(struct i2c_adapter *adapter,
+			       struct i2c_msg *msgs, int num)
+{
+	struct tegra_bpmp_i2c *i2c = i2c_get_adapdata(adapter);
+	struct mrq_i2c_response response;
+	struct mrq_i2c_request request;
+	int err;
+
+	err = tegra_bpmp_i2c_msg_len_check(msgs, num);
+	if (err < 0) {
+		dev_err(i2c->dev, "unsupported message length\n");
+		return err;
+	}
+
+	memset(&request, 0, sizeof(request));
+	memset(&response, 0, sizeof(response));
+
+	err = tegra_bpmp_serialize_i2c_msg(i2c, &request, msgs, num);
+	if (err < 0) {
+		dev_err(i2c->dev, "failed to serialize message: %d\n", err);
+		return err;
+	}
+
+	err = tegra_bpmp_i2c_msg_xfer(i2c, &request, &response);
+	if (err < 0) {
+		dev_err(i2c->dev, "failed to transfer message: %d\n", err);
+		return err;
+	}
+
+	err = tegra_bpmp_i2c_deserialize(i2c, &response, msgs, num);
+	if (err < 0) {
+		dev_err(i2c->dev, "failed to deserialize message: %d\n", err);
+		return err;
+	}
+
+	return num;
+}
+
+static u32 tegra_bpmp_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+	       I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm tegra_bpmp_i2c_algo = {
+	.master_xfer = tegra_bpmp_i2c_xfer,
+	.functionality = tegra_bpmp_i2c_func,
+};
+
+static int tegra_bpmp_i2c_probe(struct platform_device *pdev)
+{
+	struct tegra_bpmp_i2c *i2c;
+	u32 value;
+	int err;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->dev = &pdev->dev;
+
+	i2c->bpmp = dev_get_drvdata(pdev->dev.parent);
+	if (!i2c->bpmp)
+		return -ENODEV;
+
+	err = of_property_read_u32(pdev->dev.of_node, "nvidia,bpmp-bus-id",
+				   &value);
+	if (err < 0)
+		return err;
+
+	i2c->bus = value;
+
+	i2c_set_adapdata(&i2c->adapter, i2c);
+	i2c->adapter.owner = THIS_MODULE;
+	strlcpy(i2c->adapter.name, "Tegra BPMP I2C adapter",
+		sizeof(i2c->adapter.name));
+	i2c->adapter.algo = &tegra_bpmp_i2c_algo;
+	i2c->adapter.dev.parent = &pdev->dev;
+	i2c->adapter.dev.of_node = pdev->dev.of_node;
+
+	platform_set_drvdata(pdev, i2c);
+
+	return i2c_add_adapter(&i2c->adapter);
+}
+
+static int tegra_bpmp_i2c_remove(struct platform_device *pdev)
+{
+	struct tegra_bpmp_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_bpmp_i2c_of_match[] = {
+	{ .compatible = "nvidia,tegra186-bpmp-i2c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra_bpmp_i2c_of_match);
+
+static struct platform_driver tegra_bpmp_i2c_driver = {
+	.driver = {
+		.name = "tegra-bpmp-i2c",
+		.of_match_table = tegra_bpmp_i2c_of_match,
+	},
+	.probe = tegra_bpmp_i2c_probe,
+	.remove = tegra_bpmp_i2c_remove,
+};
+module_platform_driver(tegra_bpmp_i2c_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra BPMP I2C bus controller driver");
+MODULE_AUTHOR("Shardar Shariff Md <smohammed@nvidia.com>");
+MODULE_AUTHOR("Juha-Matti Tilli");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra.c
new file mode 100644
index 0000000..b90f151
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tegra.c
@@ -0,0 +1,1115 @@
+/*
+ * drivers/i2c/busses/i2c-tegra.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+
+#include <asm/unaligned.h>
+
+#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
+#define BYTES_PER_FIFO_WORD 4
+
+#define I2C_CNFG				0x000
+#define I2C_CNFG_DEBOUNCE_CNT_SHIFT		12
+#define I2C_CNFG_PACKET_MODE_EN			BIT(10)
+#define I2C_CNFG_NEW_MASTER_FSM			BIT(11)
+#define I2C_CNFG_MULTI_MASTER_MODE		BIT(17)
+#define I2C_STATUS				0x01C
+#define I2C_SL_CNFG				0x020
+#define I2C_SL_CNFG_NACK			BIT(1)
+#define I2C_SL_CNFG_NEWSL			BIT(2)
+#define I2C_SL_ADDR1				0x02c
+#define I2C_SL_ADDR2				0x030
+#define I2C_TX_FIFO				0x050
+#define I2C_RX_FIFO				0x054
+#define I2C_PACKET_TRANSFER_STATUS		0x058
+#define I2C_FIFO_CONTROL			0x05c
+#define I2C_FIFO_CONTROL_TX_FLUSH		BIT(1)
+#define I2C_FIFO_CONTROL_RX_FLUSH		BIT(0)
+#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT		5
+#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT		2
+#define I2C_FIFO_STATUS				0x060
+#define I2C_FIFO_STATUS_TX_MASK			0xF0
+#define I2C_FIFO_STATUS_TX_SHIFT		4
+#define I2C_FIFO_STATUS_RX_MASK			0x0F
+#define I2C_FIFO_STATUS_RX_SHIFT		0
+#define I2C_INT_MASK				0x064
+#define I2C_INT_STATUS				0x068
+#define I2C_INT_PACKET_XFER_COMPLETE		BIT(7)
+#define I2C_INT_ALL_PACKETS_XFER_COMPLETE	BIT(6)
+#define I2C_INT_TX_FIFO_OVERFLOW		BIT(5)
+#define I2C_INT_RX_FIFO_UNDERFLOW		BIT(4)
+#define I2C_INT_NO_ACK				BIT(3)
+#define I2C_INT_ARBITRATION_LOST		BIT(2)
+#define I2C_INT_TX_FIFO_DATA_REQ		BIT(1)
+#define I2C_INT_RX_FIFO_DATA_REQ		BIT(0)
+#define I2C_CLK_DIVISOR				0x06c
+#define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT	16
+#define I2C_CLK_MULTIPLIER_STD_FAST_MODE	8
+
+#define DVC_CTRL_REG1				0x000
+#define DVC_CTRL_REG1_INTR_EN			BIT(10)
+#define DVC_CTRL_REG2				0x004
+#define DVC_CTRL_REG3				0x008
+#define DVC_CTRL_REG3_SW_PROG			BIT(26)
+#define DVC_CTRL_REG3_I2C_DONE_INTR_EN		BIT(30)
+#define DVC_STATUS				0x00c
+#define DVC_STATUS_I2C_DONE_INTR		BIT(30)
+
+#define I2C_ERR_NONE				0x00
+#define I2C_ERR_NO_ACK				0x01
+#define I2C_ERR_ARBITRATION_LOST		0x02
+#define I2C_ERR_UNKNOWN_INTERRUPT		0x04
+
+#define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
+#define PACKET_HEADER0_PACKET_ID_SHIFT		16
+#define PACKET_HEADER0_CONT_ID_SHIFT		12
+#define PACKET_HEADER0_PROTOCOL_I2C		BIT(4)
+
+#define I2C_HEADER_HIGHSPEED_MODE		BIT(22)
+#define I2C_HEADER_CONT_ON_NAK			BIT(21)
+#define I2C_HEADER_SEND_START_BYTE		BIT(20)
+#define I2C_HEADER_READ				BIT(19)
+#define I2C_HEADER_10BIT_ADDR			BIT(18)
+#define I2C_HEADER_IE_ENABLE			BIT(17)
+#define I2C_HEADER_REPEAT_START			BIT(16)
+#define I2C_HEADER_CONTINUE_XFER		BIT(15)
+#define I2C_HEADER_MASTER_ADDR_SHIFT		12
+#define I2C_HEADER_SLAVE_ADDR_SHIFT		1
+
+#define I2C_CONFIG_LOAD				0x08C
+#define I2C_MSTR_CONFIG_LOAD			BIT(0)
+#define I2C_SLV_CONFIG_LOAD			BIT(1)
+#define I2C_TIMEOUT_CONFIG_LOAD			BIT(2)
+
+#define I2C_CLKEN_OVERRIDE			0x090
+#define I2C_MST_CORE_CLKEN_OVR			BIT(0)
+
+#define I2C_CONFIG_LOAD_TIMEOUT			1000000
+
+/*
+ * msg_end_type: The bus control which need to be send at end of transfer.
+ * @MSG_END_STOP: Send stop pulse at end of transfer.
+ * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
+ * @MSG_END_CONTINUE: The following on message is coming and so do not send
+ *		stop or repeat start.
+ */
+enum msg_end_type {
+	MSG_END_STOP,
+	MSG_END_REPEAT_START,
+	MSG_END_CONTINUE,
+};
+
+/**
+ * struct tegra_i2c_hw_feature : Different HW support on Tegra
+ * @has_continue_xfer_support: Continue transfer supports.
+ * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer
+ *		complete interrupt per packet basis.
+ * @has_single_clk_source: The i2c controller has single clock source. Tegra30
+ *		and earlier Socs has two clock sources i.e. div-clk and
+ *		fast-clk.
+ * @has_config_load_reg: Has the config load register to load the new
+ *		configuration.
+ * @clk_divisor_hs_mode: Clock divisor in HS mode.
+ * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
+ *		applicable if there is no fast clock source i.e. single clock
+ *		source.
+ */
+
+struct tegra_i2c_hw_feature {
+	bool has_continue_xfer_support;
+	bool has_per_pkt_xfer_complete_irq;
+	bool has_single_clk_source;
+	bool has_config_load_reg;
+	int clk_divisor_hs_mode;
+	int clk_divisor_std_fast_mode;
+	u16 clk_divisor_fast_plus_mode;
+	bool has_multi_master_mode;
+	bool has_slcg_override_reg;
+};
+
+/**
+ * struct tegra_i2c_dev	- per device i2c context
+ * @dev: device reference for power management
+ * @hw: Tegra i2c hw feature.
+ * @adapter: core i2c layer adapter information
+ * @div_clk: clock reference for div clock of i2c controller.
+ * @fast_clk: clock reference for fast clock of i2c controller.
+ * @base: ioremapped registers cookie
+ * @cont_id: i2c controller id, used for for packet header
+ * @irq: irq number of transfer complete interrupt
+ * @is_dvc: identifies the DVC i2c controller, has a different register layout
+ * @msg_complete: transfer completion notifier
+ * @msg_err: error code for completed message
+ * @msg_buf: pointer to current message data
+ * @msg_buf_remaining: size of unsent data in the message buffer
+ * @msg_read: identifies read transfers
+ * @bus_clk_rate: current i2c bus clock rate
+ * @is_suspended: prevents i2c controller accesses after suspend is called
+ */
+struct tegra_i2c_dev {
+	struct device *dev;
+	const struct tegra_i2c_hw_feature *hw;
+	struct i2c_adapter adapter;
+	struct clk *div_clk;
+	struct clk *fast_clk;
+	struct reset_control *rst;
+	void __iomem *base;
+	int cont_id;
+	int irq;
+	bool irq_disabled;
+	int is_dvc;
+	struct completion msg_complete;
+	int msg_err;
+	u8 *msg_buf;
+	size_t msg_buf_remaining;
+	int msg_read;
+	u32 bus_clk_rate;
+	u16 clk_divisor_non_hs_mode;
+	bool is_suspended;
+	bool is_multimaster_mode;
+	spinlock_t xfer_lock;
+};
+
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+		       unsigned long reg)
+{
+	writel(val, i2c_dev->base + reg);
+}
+
+static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
+{
+	return readl(i2c_dev->base + reg);
+}
+
+/*
+ * i2c_writel and i2c_readl will offset the register if necessary to talk
+ * to the I2C block inside the DVC block
+ */
+static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
+	unsigned long reg)
+{
+	if (i2c_dev->is_dvc)
+		reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
+	return reg;
+}
+
+static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+	unsigned long reg)
+{
+	writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+
+	/* Read back register to make sure that register writes completed */
+	if (reg != I2C_TX_FIFO)
+		readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+}
+
+static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
+{
+	return readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+}
+
+static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
+	unsigned long reg, int len)
+{
+	writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
+}
+
+static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
+	unsigned long reg, int len)
+{
+	readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
+}
+
+static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
+{
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) & ~mask;
+	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
+}
+
+static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
+{
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) | mask;
+	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
+}
+
+static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
+{
+	unsigned long timeout = jiffies + HZ;
+	u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL);
+
+	val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH;
+	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
+
+	while (i2c_readl(i2c_dev, I2C_FIFO_CONTROL) &
+		(I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH)) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n");
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+	return 0;
+}
+
+static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val;
+	int rx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	int words_to_transfer;
+
+	val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+	rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >>
+		I2C_FIFO_STATUS_RX_SHIFT;
+
+	/* Rounds down to not include partial word at the end of buf */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+	if (words_to_transfer > rx_fifo_avail)
+		words_to_transfer = rx_fifo_avail;
+
+	i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer);
+
+	buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+	rx_fifo_avail -= words_to_transfer;
+
+	/*
+	 * If there is a partial word at the end of buf, handle it manually to
+	 * prevent overwriting past the end of buf
+	 */
+	if (rx_fifo_avail > 0 && buf_remaining > 0) {
+		BUG_ON(buf_remaining > 3);
+		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
+		val = cpu_to_le32(val);
+		memcpy(buf, &val, buf_remaining);
+		buf_remaining = 0;
+		rx_fifo_avail--;
+	}
+
+	BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
+	i2c_dev->msg_buf_remaining = buf_remaining;
+	i2c_dev->msg_buf = buf;
+	return 0;
+}
+
+static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val;
+	int tx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	int words_to_transfer;
+
+	val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+	tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >>
+		I2C_FIFO_STATUS_TX_SHIFT;
+
+	/* Rounds down to not include partial word at the end of buf */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+
+	/* It's very common to have < 4 bytes, so optimize that case. */
+	if (words_to_transfer) {
+		if (words_to_transfer > tx_fifo_avail)
+			words_to_transfer = tx_fifo_avail;
+
+		/*
+		 * Update state before writing to FIFO.  If this casues us
+		 * to finish writing all bytes (AKA buf_remaining goes to 0) we
+		 * have a potential for an interrupt (PACKET_XFER_COMPLETE is
+		 * not maskable).  We need to make sure that the isr sees
+		 * buf_remaining as 0 and doesn't call us back re-entrantly.
+		 */
+		buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+		tx_fifo_avail -= words_to_transfer;
+		i2c_dev->msg_buf_remaining = buf_remaining;
+		i2c_dev->msg_buf = buf +
+			words_to_transfer * BYTES_PER_FIFO_WORD;
+		barrier();
+
+		i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+
+		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	}
+
+	/*
+	 * If there is a partial word at the end of buf, handle it manually to
+	 * prevent reading past the end of buf, which could cross a page
+	 * boundary and fault.
+	 */
+	if (tx_fifo_avail > 0 && buf_remaining > 0) {
+		BUG_ON(buf_remaining > 3);
+		memcpy(&val, buf, buf_remaining);
+		val = le32_to_cpu(val);
+
+		/* Again update before writing to FIFO to make sure isr sees. */
+		i2c_dev->msg_buf_remaining = 0;
+		i2c_dev->msg_buf = NULL;
+		barrier();
+
+		i2c_writel(i2c_dev, val, I2C_TX_FIFO);
+	}
+
+	return 0;
+}
+
+/*
+ * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
+ * block.  This block is identical to the rest of the I2C blocks, except that
+ * it only supports master mode, it has registers moved around, and it needs
+ * some extra init to get it into I2C mode.  The register moves are handled
+ * by i2c_readl and i2c_writel
+ */
+static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val;
+
+	val = dvc_readl(i2c_dev, DVC_CTRL_REG3);
+	val |= DVC_CTRL_REG3_SW_PROG;
+	val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN;
+	dvc_writel(i2c_dev, val, DVC_CTRL_REG3);
+
+	val = dvc_readl(i2c_dev, DVC_CTRL_REG1);
+	val |= DVC_CTRL_REG1_INTR_EN;
+	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
+}
+
+static int tegra_i2c_runtime_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(i2c_dev->dev);
+	if (ret)
+		return ret;
+
+	if (!i2c_dev->hw->has_single_clk_source) {
+		ret = clk_enable(i2c_dev->fast_clk);
+		if (ret < 0) {
+			dev_err(i2c_dev->dev,
+				"Enabling fast clk failed, err %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = clk_enable(i2c_dev->div_clk);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev,
+			"Enabling div clk failed, err %d\n", ret);
+		clk_disable(i2c_dev->fast_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tegra_i2c_runtime_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	clk_disable(i2c_dev->div_clk);
+	if (!i2c_dev->hw->has_single_clk_source)
+		clk_disable(i2c_dev->fast_clk);
+
+	return pinctrl_pm_select_idle_state(i2c_dev->dev);
+}
+
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+{
+	unsigned long reg_offset;
+	void __iomem *addr;
+	u32 val;
+	int err;
+
+	if (i2c_dev->hw->has_config_load_reg) {
+		reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
+		addr = i2c_dev->base + reg_offset;
+		i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
+		if (in_interrupt())
+			err = readl_poll_timeout_atomic(addr, val, val == 0,
+					1000, I2C_CONFIG_LOAD_TIMEOUT);
+		else
+			err = readl_poll_timeout(addr, val, val == 0,
+					1000, I2C_CONFIG_LOAD_TIMEOUT);
+
+		if (err) {
+			dev_warn(i2c_dev->dev,
+				 "timeout waiting for config load\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val;
+	int err;
+	u32 clk_divisor;
+
+	err = pm_runtime_get_sync(i2c_dev->dev);
+	if (err < 0) {
+		dev_err(i2c_dev->dev, "runtime resume failed %d\n", err);
+		return err;
+	}
+
+	reset_control_assert(i2c_dev->rst);
+	udelay(2);
+	reset_control_deassert(i2c_dev->rst);
+
+	if (i2c_dev->is_dvc)
+		tegra_dvc_init(i2c_dev);
+
+	val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
+		(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
+
+	if (i2c_dev->hw->has_multi_master_mode)
+		val |= I2C_CNFG_MULTI_MASTER_MODE;
+
+	i2c_writel(i2c_dev, val, I2C_CNFG);
+	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
+
+	/* Make sure clock divisor programmed correctly */
+	clk_divisor = i2c_dev->hw->clk_divisor_hs_mode;
+	clk_divisor |= i2c_dev->clk_divisor_non_hs_mode <<
+					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
+	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
+
+	if (!i2c_dev->is_dvc) {
+		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+
+		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
+		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
+		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
+		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
+	}
+
+	val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
+		0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
+	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
+
+	err = tegra_i2c_flush_fifos(i2c_dev);
+	if (err)
+		goto err;
+
+	if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
+		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
+
+	err = tegra_i2c_wait_for_config_load(i2c_dev);
+	if (err)
+		goto err;
+
+	if (i2c_dev->irq_disabled) {
+		i2c_dev->irq_disabled = false;
+		enable_irq(i2c_dev->irq);
+	}
+
+err:
+	pm_runtime_put(i2c_dev->dev);
+	return err;
+}
+
+static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 cnfg;
+
+	/*
+	 * NACK interrupt is generated before the I2C controller generates
+	 * the STOP condition on the bus. So wait for 2 clock periods
+	 * before disabling the controller so that the STOP condition has
+	 * been delivered properly.
+	 */
+	udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
+
+	cnfg = i2c_readl(i2c_dev, I2C_CNFG);
+	if (cnfg & I2C_CNFG_PACKET_MODE_EN)
+		i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
+
+	return tegra_i2c_wait_for_config_load(i2c_dev);
+}
+
+static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
+{
+	u32 status;
+	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+	struct tegra_i2c_dev *i2c_dev = dev_id;
+	unsigned long flags;
+
+	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
+
+	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
+	if (status == 0) {
+		dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
+			 i2c_readl(i2c_dev, I2C_STATUS),
+			 i2c_readl(i2c_dev, I2C_CNFG));
+		i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+
+		if (!i2c_dev->irq_disabled) {
+			disable_irq_nosync(i2c_dev->irq);
+			i2c_dev->irq_disabled = true;
+		}
+		goto err;
+	}
+
+	if (unlikely(status & status_err)) {
+		tegra_i2c_disable_packet_mode(i2c_dev);
+		if (status & I2C_INT_NO_ACK)
+			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
+		if (status & I2C_INT_ARBITRATION_LOST)
+			i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
+		goto err;
+	}
+
+	if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
+		if (i2c_dev->msg_buf_remaining)
+			tegra_i2c_empty_rx_fifo(i2c_dev);
+		else
+			BUG();
+	}
+
+	if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
+		if (i2c_dev->msg_buf_remaining)
+			tegra_i2c_fill_tx_fifo(i2c_dev);
+		else
+			tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
+	}
+
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
+		BUG_ON(i2c_dev->msg_buf_remaining);
+		complete(&i2c_dev->msg_complete);
+	}
+	goto done;
+err:
+	/* An error occurred, mask all interrupts */
+	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
+		I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
+		I2C_INT_RX_FIFO_DATA_REQ);
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	complete(&i2c_dev->msg_complete);
+done:
+	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
+	struct i2c_msg *msg, enum msg_end_type end_state)
+{
+	u32 packet_header;
+	u32 int_mask;
+	unsigned long time_left;
+	unsigned long flags;
+
+	tegra_i2c_flush_fifos(i2c_dev);
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	i2c_dev->msg_buf = msg->buf;
+	i2c_dev->msg_buf_remaining = msg->len;
+	i2c_dev->msg_err = I2C_ERR_NONE;
+	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
+	reinit_completion(&i2c_dev->msg_complete);
+
+	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
+
+	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+
+	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
+			PACKET_HEADER0_PROTOCOL_I2C |
+			(i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) |
+			(1 << PACKET_HEADER0_PACKET_ID_SHIFT);
+	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = msg->len - 1;
+	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = I2C_HEADER_IE_ENABLE;
+	if (end_state == MSG_END_CONTINUE)
+		packet_header |= I2C_HEADER_CONTINUE_XFER;
+	else if (end_state == MSG_END_REPEAT_START)
+		packet_header |= I2C_HEADER_REPEAT_START;
+	if (msg->flags & I2C_M_TEN) {
+		packet_header |= msg->addr;
+		packet_header |= I2C_HEADER_10BIT_ADDR;
+	} else {
+		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+	}
+	if (msg->flags & I2C_M_IGNORE_NAK)
+		packet_header |= I2C_HEADER_CONT_ON_NAK;
+	if (msg->flags & I2C_M_RD)
+		packet_header |= I2C_HEADER_READ;
+	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	if (!(msg->flags & I2C_M_RD))
+		tegra_i2c_fill_tx_fifo(i2c_dev);
+
+	if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
+		int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
+	if (msg->flags & I2C_M_RD)
+		int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
+	else if (i2c_dev->msg_buf_remaining)
+		int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+
+	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
+	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
+		i2c_readl(i2c_dev, I2C_INT_MASK));
+
+	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
+						TEGRA_I2C_TIMEOUT);
+	tegra_i2c_mask_irq(i2c_dev, int_mask);
+
+	if (time_left == 0) {
+		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
+
+		tegra_i2c_init(i2c_dev);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(i2c_dev->dev, "transfer complete: %lu %d %d\n",
+		time_left, completion_done(&i2c_dev->msg_complete),
+		i2c_dev->msg_err);
+
+	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
+		return 0;
+
+	tegra_i2c_init(i2c_dev);
+	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return 0;
+		return -EREMOTEIO;
+	}
+
+	return -EIO;
+}
+
+static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+	int num)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	int i;
+	int ret = 0;
+
+	if (i2c_dev->is_suspended)
+		return -EBUSY;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		enum msg_end_type end_type = MSG_END_STOP;
+
+		if (i < (num - 1)) {
+			if (msgs[i + 1].flags & I2C_M_NOSTART)
+				end_type = MSG_END_CONTINUE;
+			else
+				end_type = MSG_END_REPEAT_START;
+		}
+		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
+		if (ret)
+			break;
+	}
+
+	pm_runtime_put(i2c_dev->dev);
+
+	return ret ?: i;
+}
+
+static u32 tegra_i2c_func(struct i2c_adapter *adap)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+		  I2C_FUNC_10BIT_ADDR |	I2C_FUNC_PROTOCOL_MANGLING;
+
+	if (i2c_dev->hw->has_continue_xfer_support)
+		ret |= I2C_FUNC_NOSTART;
+	return ret;
+}
+
+static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
+{
+	struct device_node *np = i2c_dev->dev->of_node;
+	int ret;
+
+	ret = of_property_read_u32(np, "clock-frequency",
+			&i2c_dev->bus_clk_rate);
+	if (ret)
+		i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+
+	i2c_dev->is_multimaster_mode = of_property_read_bool(np,
+			"multi-master");
+}
+
+static const struct i2c_algorithm tegra_i2c_algo = {
+	.master_xfer	= tegra_i2c_xfer,
+	.functionality	= tegra_i2c_func,
+};
+
+/* payload size is only 12 bit */
+static const struct i2c_adapter_quirks tegra_i2c_quirks = {
+	.max_read_len = 4096,
+	.max_write_len = 4096 - 12,
+};
+
+static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
+	.has_continue_xfer_support = false,
+	.has_per_pkt_xfer_complete_irq = false,
+	.has_single_clk_source = false,
+	.clk_divisor_hs_mode = 3,
+	.clk_divisor_std_fast_mode = 0,
+	.clk_divisor_fast_plus_mode = 0,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = false,
+	.has_single_clk_source = false,
+	.clk_divisor_hs_mode = 3,
+	.clk_divisor_std_fast_mode = 0,
+	.clk_divisor_fast_plus_mode = 0,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.has_single_clk_source = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.has_single_clk_source = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.has_single_clk_source = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = true,
+	.has_slcg_override_reg = true,
+};
+
+/* Match table for of_platform binding */
+static const struct of_device_id tegra_i2c_of_match[] = {
+	{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
+	{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
+	{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
+	{ .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c-dvc", .data = &tegra20_i2c_hw, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+
+static int tegra_i2c_probe(struct platform_device *pdev)
+{
+	struct tegra_i2c_dev *i2c_dev;
+	struct resource *res;
+	struct clk *div_clk;
+	struct clk *fast_clk;
+	void __iomem *base;
+	int irq;
+	int ret = 0;
+	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no irq resource\n");
+		return -EINVAL;
+	}
+	irq = res->start;
+
+	div_clk = devm_clk_get(&pdev->dev, "div-clk");
+	if (IS_ERR(div_clk)) {
+		dev_err(&pdev->dev, "missing controller clock\n");
+		return PTR_ERR(div_clk);
+	}
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	i2c_dev->base = base;
+	i2c_dev->div_clk = div_clk;
+	i2c_dev->adapter.algo = &tegra_i2c_algo;
+	i2c_dev->adapter.quirks = &tegra_i2c_quirks;
+	i2c_dev->irq = irq;
+	i2c_dev->cont_id = pdev->id;
+	i2c_dev->dev = &pdev->dev;
+
+	i2c_dev->rst = devm_reset_control_get_exclusive(&pdev->dev, "i2c");
+	if (IS_ERR(i2c_dev->rst)) {
+		dev_err(&pdev->dev, "missing controller reset\n");
+		return PTR_ERR(i2c_dev->rst);
+	}
+
+	tegra_i2c_parse_dt(i2c_dev);
+
+	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
+	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+						  "nvidia,tegra20-i2c-dvc");
+	init_completion(&i2c_dev->msg_complete);
+	spin_lock_init(&i2c_dev->xfer_lock);
+
+	if (!i2c_dev->hw->has_single_clk_source) {
+		fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
+		if (IS_ERR(fast_clk)) {
+			dev_err(&pdev->dev, "missing fast clock\n");
+			return PTR_ERR(fast_clk);
+		}
+		i2c_dev->fast_clk = fast_clk;
+	}
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	if (!i2c_dev->hw->has_single_clk_source) {
+		ret = clk_prepare(i2c_dev->fast_clk);
+		if (ret < 0) {
+			dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+			return ret;
+		}
+	}
+
+	i2c_dev->clk_divisor_non_hs_mode =
+			i2c_dev->hw->clk_divisor_std_fast_mode;
+	if (i2c_dev->hw->clk_divisor_fast_plus_mode &&
+		(i2c_dev->bus_clk_rate == 1000000))
+		i2c_dev->clk_divisor_non_hs_mode =
+			i2c_dev->hw->clk_divisor_fast_plus_mode;
+
+	clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
+	ret = clk_set_rate(i2c_dev->div_clk,
+			   i2c_dev->bus_clk_rate * clk_multiplier);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Clock rate change failed %d\n", ret);
+		goto unprepare_fast_clk;
+	}
+
+	ret = clk_prepare(i2c_dev->div_clk);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+		goto unprepare_fast_clk;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = tegra_i2c_runtime_resume(&pdev->dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "runtime resume failed\n");
+			goto unprepare_div_clk;
+		}
+	}
+
+	if (i2c_dev->is_multimaster_mode) {
+		ret = clk_enable(i2c_dev->div_clk);
+		if (ret < 0) {
+			dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
+				ret);
+			goto disable_rpm;
+		}
+	}
+
+	ret = tegra_i2c_init(i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
+		goto disable_div_clk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
+			tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
+		goto disable_div_clk;
+	}
+
+	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
+	i2c_dev->adapter.owner = THIS_MODULE;
+	i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
+	strlcpy(i2c_dev->adapter.name, dev_name(&pdev->dev),
+		sizeof(i2c_dev->adapter.name));
+	i2c_dev->adapter.dev.parent = &pdev->dev;
+	i2c_dev->adapter.nr = pdev->id;
+	i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
+
+	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
+	if (ret)
+		goto disable_div_clk;
+
+	return 0;
+
+disable_div_clk:
+	if (i2c_dev->is_multimaster_mode)
+		clk_disable(i2c_dev->div_clk);
+
+disable_rpm:
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		tegra_i2c_runtime_suspend(&pdev->dev);
+
+unprepare_div_clk:
+	clk_unprepare(i2c_dev->div_clk);
+
+unprepare_fast_clk:
+	if (!i2c_dev->hw->has_single_clk_source)
+		clk_unprepare(i2c_dev->fast_clk);
+
+	return ret;
+}
+
+static int tegra_i2c_remove(struct platform_device *pdev)
+{
+	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adapter);
+
+	if (i2c_dev->is_multimaster_mode)
+		clk_disable(i2c_dev->div_clk);
+
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		tegra_i2c_runtime_suspend(&pdev->dev);
+
+	clk_unprepare(i2c_dev->div_clk);
+	if (!i2c_dev->hw->has_single_clk_source)
+		clk_unprepare(i2c_dev->fast_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_i2c_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_lock_adapter(&i2c_dev->adapter);
+	i2c_dev->is_suspended = true;
+	i2c_unlock_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static int tegra_i2c_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int ret;
+
+	i2c_lock_adapter(&i2c_dev->adapter);
+
+	ret = tegra_i2c_init(i2c_dev);
+	if (!ret)
+		i2c_dev->is_suspended = false;
+
+	i2c_unlock_adapter(&i2c_dev->adapter);
+
+	return ret;
+}
+
+static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
+};
+#define TEGRA_I2C_PM	(&tegra_i2c_pm)
+#else
+#define TEGRA_I2C_PM	NULL
+#endif
+
+static struct platform_driver tegra_i2c_driver = {
+	.probe   = tegra_i2c_probe,
+	.remove  = tegra_i2c_remove,
+	.driver  = {
+		.name  = "tegra-i2c",
+		.of_match_table = tegra_i2c_of_match,
+		.pm    = TEGRA_I2C_PM,
+	},
+};
+
+static int __init tegra_i2c_init_driver(void)
+{
+	return platform_driver_register(&tegra_i2c_driver);
+}
+
+static void __exit tegra_i2c_exit_driver(void)
+{
+	platform_driver_unregister(&tegra_i2c_driver);
+}
+
+subsys_initcall(tegra_i2c_init_driver);
+module_exit(tegra_i2c_exit_driver);
+
+MODULE_DESCRIPTION("nVidia Tegra2 I2C Bus Controller driver");
+MODULE_AUTHOR("Colin Cross");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-thunderx-pcidrv.c
new file mode 100644
index 0000000..df0976f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -0,0 +1,266 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@caviumnetworks.com>
+ *	    Jan Glauber <jglauber@cavium.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_DEVICE_ID_THUNDER_TWSI	0xa012
+
+#define SYS_FREQ_DEFAULT		700000000
+
+#define TWSI_INT_ENA_W1C		0x1028
+#define TWSI_INT_ENA_W1S		0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = thunderx_i2c_functionality,
+};
+
+static const struct i2c_adapter thunderx_i2c_ops = {
+	.owner	= THIS_MODULE,
+	.name	= "ThunderX adapter",
+	.algo	= &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+	int ret;
+
+	if (acpi_disabled) {
+		/* DT */
+		i2c->clk = clk_get(dev, NULL);
+		if (IS_ERR(i2c->clk)) {
+			i2c->clk = NULL;
+			goto skip;
+		}
+
+		ret = clk_prepare_enable(i2c->clk);
+		if (ret)
+			goto skip;
+		i2c->sys_freq = clk_get_rate(i2c->clk);
+	} else {
+		/* ACPI */
+		device_property_read_u32(dev, "sclk", &i2c->sys_freq);
+	}
+
+skip:
+	if (!i2c->sys_freq)
+		i2c->sys_freq = SYS_FREQ_DEFAULT;
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+	if (!clk)
+		return;
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+}
+
+static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
+				      struct device_node *node)
+{
+	u32 type;
+
+	if (!node)
+		return -EINVAL;
+
+	i2c->alert_data.irq = irq_of_parse_and_map(node, 0);
+	if (!i2c->alert_data.irq)
+		return -EINVAL;
+
+	type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
+	i2c->alert_data.alert_edge_triggered =
+		(type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
+
+	i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
+	if (!i2c->ara)
+		return -ENODEV;
+	return 0;
+}
+
+static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
+				   struct device_node *node)
+{
+	/* TODO: ACPI support */
+	if (!acpi_disabled)
+		return -EOPNOTSUPP;
+
+	return thunder_i2c_smbus_setup_of(i2c, node);
+}
+
+static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
+{
+	if (i2c->ara)
+		i2c_unregister_device(i2c->ara);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
+{
+	struct device *dev = &pdev->dev;
+	struct octeon_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->roff.sw_twsi = 0x1000;
+	i2c->roff.twsi_int = 0x1010;
+	i2c->roff.sw_twsi_ext = 0x1018;
+
+	i2c->dev = dev;
+	pci_set_drvdata(pdev, i2c);
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pdev, DRV_NAME);
+	if (ret)
+		return ret;
+
+	i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+	if (!i2c->twsi_base)
+		return -EINVAL;
+
+	thunder_i2c_clock_enable(dev, i2c);
+	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
+	if (ret)
+		i2c->twsi_freq = 100000;
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->int_enable = thunder_i2c_int_enable;
+	i2c->int_disable = thunder_i2c_int_disable;
+	i2c->hlc_int_enable = thunder_i2c_hlc_int_enable;
+	i2c->hlc_int_disable = thunder_i2c_hlc_int_disable;
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
+	if (ret < 0)
+		goto error;
+
+	ret = devm_request_irq(dev, pci_irq_vector(pdev, 0), octeon_i2c_isr, 0,
+			       DRV_NAME, i2c);
+	if (ret)
+		goto error;
+
+	ret = octeon_i2c_init_lowlevel(i2c);
+	if (ret)
+		goto error;
+
+	octeon_i2c_set_clock(i2c);
+
+	i2c->adap = thunderx_i2c_ops;
+	i2c->adap.retries = 5;
+	i2c->adap.class = I2C_CLASS_HWMON;
+	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+	i2c->adap.dev.parent = dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 "Cavium ThunderX i2c adapter at %s", dev_name(dev));
+	i2c_set_adapdata(&i2c->adap, i2c);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret)
+		goto error;
+
+	dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq);
+
+	ret = thunder_i2c_smbus_setup(i2c, pdev->dev.of_node);
+	if (ret)
+		dev_info(dev, "SMBUS alert not active on this bus\n");
+
+	return 0;
+
+error:
+	thunder_i2c_clock_disable(dev, i2c->clk);
+	return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+	struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+
+	thunder_i2c_smbus_remove(i2c);
+	thunder_i2c_clock_disable(&pdev->dev, i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= thunder_i2c_pci_id_table,
+	.probe		= thunder_i2c_probe_pci,
+	.remove		= thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tiny-usb.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tiny-usb.c
new file mode 100644
index 0000000..a2e3dd7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-tiny-usb.c
@@ -0,0 +1,307 @@
+/*
+ * driver for the i2c-tiny-usb adapter - 1.0
+ * http://www.harbaum.org/till/i2c_tiny_usb
+ *
+ * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* include interfaces to usb layer */
+#include <linux/usb.h>
+
+/* include interface to i2c layer */
+#include <linux/i2c.h>
+
+/* commands via USB, must match command ids in the firmware */
+#define CMD_ECHO		0
+#define CMD_GET_FUNC		1
+#define CMD_SET_DELAY		2
+#define CMD_GET_STATUS		3
+
+#define CMD_I2C_IO		4
+#define CMD_I2C_IO_BEGIN	(1<<0)
+#define CMD_I2C_IO_END		(1<<1)
+
+/* i2c bit delay, default is 10us -> 100kHz max
+   (in practice, due to additional delays in the i2c bitbanging
+   code this results in a i2c clock of about 50kHz) */
+static unsigned short delay = 10;
+module_param(delay, ushort, 0);
+MODULE_PARM_DESC(delay, "bit delay in microseconds "
+		 "(default is 10us for 100kHz max)");
+
+static int usb_read(struct i2c_adapter *adapter, int cmd,
+		    int value, int index, void *data, int len);
+
+static int usb_write(struct i2c_adapter *adapter, int cmd,
+		     int value, int index, void *data, int len);
+
+/* ----- begin of i2c layer ---------------------------------------------- */
+
+#define STATUS_IDLE		0
+#define STATUS_ADDRESS_ACK	1
+#define STATUS_ADDRESS_NAK	2
+
+static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+	unsigned char *pstatus;
+	struct i2c_msg *pmsg;
+	int i, ret;
+
+	dev_dbg(&adapter->dev, "master xfer %d messages:\n", num);
+
+	pstatus = kmalloc(sizeof(*pstatus), GFP_KERNEL);
+	if (!pstatus)
+		return -ENOMEM;
+
+	for (i = 0 ; i < num ; i++) {
+		int cmd = CMD_I2C_IO;
+
+		if (i == 0)
+			cmd |= CMD_I2C_IO_BEGIN;
+
+		if (i == num-1)
+			cmd |= CMD_I2C_IO_END;
+
+		pmsg = &msgs[i];
+
+		dev_dbg(&adapter->dev,
+			"  %d: %s (flags %d) %d bytes to 0x%02x\n",
+			i, pmsg->flags & I2C_M_RD ? "read" : "write",
+			pmsg->flags, pmsg->len, pmsg->addr);
+
+		/* and directly send the message */
+		if (pmsg->flags & I2C_M_RD) {
+			/* read data */
+			if (usb_read(adapter, cmd,
+				     pmsg->flags, pmsg->addr,
+				     pmsg->buf, pmsg->len) != pmsg->len) {
+				dev_err(&adapter->dev,
+					"failure reading data\n");
+				ret = -EREMOTEIO;
+				goto out;
+			}
+		} else {
+			/* write data */
+			if (usb_write(adapter, cmd,
+				      pmsg->flags, pmsg->addr,
+				      pmsg->buf, pmsg->len) != pmsg->len) {
+				dev_err(&adapter->dev,
+					"failure writing data\n");
+				ret = -EREMOTEIO;
+				goto out;
+			}
+		}
+
+		/* read status */
+		if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) {
+			dev_err(&adapter->dev, "failure reading status\n");
+			ret = -EREMOTEIO;
+			goto out;
+		}
+
+		dev_dbg(&adapter->dev, "  status = %d\n", *pstatus);
+		if (*pstatus == STATUS_ADDRESS_NAK) {
+			ret = -EREMOTEIO;
+			goto out;
+		}
+	}
+
+	ret = i;
+out:
+	kfree(pstatus);
+	return ret;
+}
+
+static u32 usb_func(struct i2c_adapter *adapter)
+{
+	__le32 *pfunc;
+	u32 ret;
+
+	pfunc = kmalloc(sizeof(*pfunc), GFP_KERNEL);
+
+	/* get functionality from adapter */
+	if (!pfunc || usb_read(adapter, CMD_GET_FUNC, 0, 0, pfunc,
+			       sizeof(*pfunc)) != sizeof(*pfunc)) {
+		dev_err(&adapter->dev, "failure reading functionality\n");
+		ret = 0;
+		goto out;
+	}
+
+	ret = le32_to_cpup(pfunc);
+out:
+	kfree(pfunc);
+	return ret;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm usb_algorithm = {
+	.master_xfer	= usb_xfer,
+	.functionality	= usb_func,
+};
+
+/* ----- end of i2c layer ------------------------------------------------ */
+
+/* ----- begin of usb layer ---------------------------------------------- */
+
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
+static const struct usb_device_id i2c_tiny_usb_table[] = {
+	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
+	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
+	{ }                               /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
+
+/* Structure to hold all of our device specific stuff */
+struct i2c_tiny_usb {
+	struct usb_device *usb_dev; /* the usb device for this device */
+	struct usb_interface *interface; /* the interface for this device */
+	struct i2c_adapter adapter; /* i2c related things */
+};
+
+static int usb_read(struct i2c_adapter *adapter, int cmd,
+		    int value, int index, void *data, int len)
+{
+	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmalloc(len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
+
+	/* do control transfer */
+	ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+			       USB_DIR_IN, value, index, dmadata, len, 2000);
+
+	memcpy(data, dmadata, len);
+	kfree(dmadata);
+	return ret;
+}
+
+static int usb_write(struct i2c_adapter *adapter, int cmd,
+		     int value, int index, void *data, int len)
+{
+	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmemdup(data, len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
+
+	/* do control transfer */
+	ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			       value, index, dmadata, len, 2000);
+
+	kfree(dmadata);
+	return ret;
+}
+
+static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)
+{
+	usb_put_dev(dev->usb_dev);
+	kfree(dev);
+}
+
+static int i2c_tiny_usb_probe(struct usb_interface *interface,
+			      const struct usb_device_id *id)
+{
+	struct i2c_tiny_usb *dev;
+	int retval = -ENOMEM;
+	u16 version;
+
+	dev_dbg(&interface->dev, "probing usb device\n");
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&interface->dev, "Out of memory\n");
+		goto error;
+	}
+
+	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = interface;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	version = le16_to_cpu(dev->usb_dev->descriptor.bcdDevice);
+	dev_info(&interface->dev,
+		 "version %x.%02x found at bus %03d address %03d\n",
+		 version >> 8, version & 0xff,
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+	/* setup i2c adapter description */
+	dev->adapter.owner = THIS_MODULE;
+	dev->adapter.class = I2C_CLASS_HWMON;
+	dev->adapter.algo = &usb_algorithm;
+	dev->adapter.algo_data = dev;
+	snprintf(dev->adapter.name, sizeof(dev->adapter.name),
+		 "i2c-tiny-usb at bus %03d device %03d",
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+	if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) {
+		dev_err(&dev->adapter.dev,
+			"failure setting delay to %dus\n", delay);
+		retval = -EIO;
+		goto error;
+	}
+
+	dev->adapter.dev.parent = &dev->interface->dev;
+
+	/* and finally attach to i2c layer */
+	i2c_add_adapter(&dev->adapter);
+
+	/* inform user about successful attachment to i2c layer */
+	dev_info(&dev->adapter.dev, "connected i2c-tiny-usb device\n");
+
+	return 0;
+
+ error:
+	if (dev)
+		i2c_tiny_usb_free(dev);
+
+	return retval;
+}
+
+static void i2c_tiny_usb_disconnect(struct usb_interface *interface)
+{
+	struct i2c_tiny_usb *dev = usb_get_intfdata(interface);
+
+	i2c_del_adapter(&dev->adapter);
+	usb_set_intfdata(interface, NULL);
+	i2c_tiny_usb_free(dev);
+
+	dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver i2c_tiny_usb_driver = {
+	.name		= "i2c-tiny-usb",
+	.probe		= i2c_tiny_usb_probe,
+	.disconnect	= i2c_tiny_usb_disconnect,
+	.id_table	= i2c_tiny_usb_table,
+};
+
+module_usb_driver(i2c_tiny_usb_driver);
+
+/* ----- end of usb layer ------------------------------------------------ */
+
+MODULE_AUTHOR("Till Harbaum <Till@Harbaum.org>");
+MODULE_DESCRIPTION("i2c-tiny-usb driver v1.0");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier-f.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier-f.c
new file mode 100644
index 0000000..dd0687e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier-f.c
@@ -0,0 +1,675 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define UNIPHIER_FI2C_CR	0x00	/* control register */
+#define     UNIPHIER_FI2C_CR_MST	BIT(3)	/* master mode */
+#define     UNIPHIER_FI2C_CR_STA	BIT(2)	/* start condition */
+#define     UNIPHIER_FI2C_CR_STO	BIT(1)	/* stop condition */
+#define     UNIPHIER_FI2C_CR_NACK	BIT(0)	/* do not return ACK */
+#define UNIPHIER_FI2C_DTTX	0x04	/* TX FIFO */
+#define     UNIPHIER_FI2C_DTTX_CMD	BIT(8)	/* send command (slave addr) */
+#define     UNIPHIER_FI2C_DTTX_RD	BIT(0)	/* read transaction */
+#define UNIPHIER_FI2C_DTRX	0x04	/* RX FIFO */
+#define UNIPHIER_FI2C_SLAD	0x0c	/* slave address */
+#define UNIPHIER_FI2C_CYC	0x10	/* clock cycle control */
+#define UNIPHIER_FI2C_LCTL	0x14	/* clock low period control */
+#define UNIPHIER_FI2C_SSUT	0x18	/* restart/stop setup time control */
+#define UNIPHIER_FI2C_DSUT	0x1c	/* data setup time control */
+#define UNIPHIER_FI2C_INT	0x20	/* interrupt status */
+#define UNIPHIER_FI2C_IE	0x24	/* interrupt enable */
+#define UNIPHIER_FI2C_IC	0x28	/* interrupt clear */
+#define     UNIPHIER_FI2C_INT_TE	BIT(9)	/* TX FIFO empty */
+#define     UNIPHIER_FI2C_INT_RF	BIT(8)	/* RX FIFO full */
+#define     UNIPHIER_FI2C_INT_TC	BIT(7)	/* send complete (STOP) */
+#define     UNIPHIER_FI2C_INT_RC	BIT(6)	/* receive complete (STOP) */
+#define     UNIPHIER_FI2C_INT_TB	BIT(5)	/* sent specified bytes */
+#define     UNIPHIER_FI2C_INT_RB	BIT(4)	/* received specified bytes */
+#define     UNIPHIER_FI2C_INT_NA	BIT(2)	/* no ACK */
+#define     UNIPHIER_FI2C_INT_AL	BIT(1)	/* arbitration lost */
+#define UNIPHIER_FI2C_SR	0x2c	/* status register */
+#define     UNIPHIER_FI2C_SR_DB		BIT(12)	/* device busy */
+#define     UNIPHIER_FI2C_SR_STS	BIT(11)	/* stop condition detected */
+#define     UNIPHIER_FI2C_SR_BB		BIT(8)	/* bus busy */
+#define     UNIPHIER_FI2C_SR_RFF	BIT(3)	/* RX FIFO full */
+#define     UNIPHIER_FI2C_SR_RNE	BIT(2)	/* RX FIFO not empty */
+#define     UNIPHIER_FI2C_SR_TNF	BIT(1)	/* TX FIFO not full */
+#define     UNIPHIER_FI2C_SR_TFE	BIT(0)	/* TX FIFO empty */
+#define UNIPHIER_FI2C_RST	0x34	/* reset control */
+#define     UNIPHIER_FI2C_RST_TBRST	BIT(2)	/* clear TX FIFO */
+#define     UNIPHIER_FI2C_RST_RBRST	BIT(1)	/* clear RX FIFO */
+#define     UNIPHIER_FI2C_RST_RST	BIT(0)	/* forcible bus reset */
+#define UNIPHIER_FI2C_BM	0x38	/* bus monitor */
+#define     UNIPHIER_FI2C_BM_SDAO	BIT(3)	/* output for SDA line */
+#define     UNIPHIER_FI2C_BM_SDAS	BIT(2)	/* readback of SDA line */
+#define     UNIPHIER_FI2C_BM_SCLO	BIT(1)	/* output for SCL line */
+#define     UNIPHIER_FI2C_BM_SCLS	BIT(0)	/* readback of SCL line */
+#define UNIPHIER_FI2C_NOISE	0x3c	/* noise filter control */
+#define UNIPHIER_FI2C_TBC	0x40	/* TX byte count setting */
+#define UNIPHIER_FI2C_RBC	0x44	/* RX byte count setting */
+#define UNIPHIER_FI2C_TBCM	0x48	/* TX byte count monitor */
+#define UNIPHIER_FI2C_RBCM	0x4c	/* RX byte count monitor */
+#define UNIPHIER_FI2C_BRST	0x50	/* bus reset */
+#define     UNIPHIER_FI2C_BRST_FOEN	BIT(1)	/* normal operation */
+#define     UNIPHIER_FI2C_BRST_RSCL	BIT(0)	/* release SCL */
+
+#define UNIPHIER_FI2C_INT_FAULTS	\
+				(UNIPHIER_FI2C_INT_NA | UNIPHIER_FI2C_INT_AL)
+#define UNIPHIER_FI2C_INT_STOP		\
+				(UNIPHIER_FI2C_INT_TC | UNIPHIER_FI2C_INT_RC)
+
+#define UNIPHIER_FI2C_RD		BIT(0)
+#define UNIPHIER_FI2C_STOP		BIT(1)
+#define UNIPHIER_FI2C_MANUAL_NACK	BIT(2)
+#define UNIPHIER_FI2C_BYTE_WISE		BIT(3)
+#define UNIPHIER_FI2C_DEFER_STOP_COMP	BIT(4)
+
+#define UNIPHIER_FI2C_DEFAULT_SPEED	100000
+#define UNIPHIER_FI2C_MAX_SPEED		400000
+#define UNIPHIER_FI2C_FIFO_SIZE		8
+
+struct uniphier_fi2c_priv {
+	struct completion comp;
+	struct i2c_adapter adap;
+	void __iomem *membase;
+	struct clk *clk;
+	unsigned int len;
+	u8 *buf;
+	u32 enabled_irqs;
+	int error;
+	unsigned int flags;
+	unsigned int busy_cnt;
+	unsigned int clk_cycle;
+	spinlock_t lock;	/* IRQ synchronization */
+};
+
+static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
+				      bool first)
+{
+	int fifo_space = UNIPHIER_FI2C_FIFO_SIZE;
+
+	/*
+	 * TX-FIFO stores slave address in it for the first access.
+	 * Decrement the counter.
+	 */
+	if (first)
+		fifo_space--;
+
+	while (priv->len) {
+		if (fifo_space-- <= 0)
+			break;
+
+		dev_dbg(&priv->adap.dev, "write data: %02x\n", *priv->buf);
+		writel(*priv->buf++, priv->membase + UNIPHIER_FI2C_DTTX);
+		priv->len--;
+	}
+}
+
+static void uniphier_fi2c_drain_rxfifo(struct uniphier_fi2c_priv *priv)
+{
+	int fifo_left = priv->flags & UNIPHIER_FI2C_BYTE_WISE ?
+						1 : UNIPHIER_FI2C_FIFO_SIZE;
+
+	while (priv->len) {
+		if (fifo_left-- <= 0)
+			break;
+
+		*priv->buf++ = readl(priv->membase + UNIPHIER_FI2C_DTRX);
+		dev_dbg(&priv->adap.dev, "read data: %02x\n", priv->buf[-1]);
+		priv->len--;
+	}
+}
+
+static void uniphier_fi2c_set_irqs(struct uniphier_fi2c_priv *priv)
+{
+	writel(priv->enabled_irqs, priv->membase + UNIPHIER_FI2C_IE);
+}
+
+static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv,
+				     u32 mask)
+{
+	writel(mask, priv->membase + UNIPHIER_FI2C_IC);
+}
+
+static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv)
+{
+	dev_dbg(&priv->adap.dev, "stop condition\n");
+
+	priv->enabled_irqs |= UNIPHIER_FI2C_INT_STOP;
+	uniphier_fi2c_set_irqs(priv);
+	writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STO,
+	       priv->membase + UNIPHIER_FI2C_CR);
+}
+
+static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
+{
+	struct uniphier_fi2c_priv *priv = dev_id;
+	u32 irq_status;
+
+	spin_lock(&priv->lock);
+
+	irq_status = readl(priv->membase + UNIPHIER_FI2C_INT);
+	irq_status &= priv->enabled_irqs;
+
+	dev_dbg(&priv->adap.dev,
+		"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
+		priv->enabled_irqs, irq_status);
+
+	if (irq_status & UNIPHIER_FI2C_INT_STOP)
+		goto complete;
+
+	if (unlikely(irq_status & UNIPHIER_FI2C_INT_AL)) {
+		dev_dbg(&priv->adap.dev, "arbitration lost\n");
+		priv->error = -EAGAIN;
+		goto complete;
+	}
+
+	if (unlikely(irq_status & UNIPHIER_FI2C_INT_NA)) {
+		dev_dbg(&priv->adap.dev, "could not get ACK\n");
+		priv->error = -ENXIO;
+		if (priv->flags & UNIPHIER_FI2C_RD) {
+			/*
+			 * work around a hardware bug:
+			 * The receive-completed interrupt is never set even if
+			 * STOP condition is detected after the address phase
+			 * of read transaction fails to get ACK.
+			 * To avoid time-out error, we issue STOP here,
+			 * but do not wait for its completion.
+			 * It should be checked after exiting this handler.
+			 */
+			uniphier_fi2c_stop(priv);
+			priv->flags |= UNIPHIER_FI2C_DEFER_STOP_COMP;
+			goto complete;
+		}
+		goto stop;
+	}
+
+	if (irq_status & UNIPHIER_FI2C_INT_TE) {
+		if (!priv->len)
+			goto data_done;
+
+		uniphier_fi2c_fill_txfifo(priv, false);
+		goto handled;
+	}
+
+	if (irq_status & (UNIPHIER_FI2C_INT_RF | UNIPHIER_FI2C_INT_RB)) {
+		uniphier_fi2c_drain_rxfifo(priv);
+		/*
+		 * If the number of bytes to read is multiple of the FIFO size
+		 * (msg->len == 8, 16, 24, ...), the INT_RF bit is set a little
+		 * earlier than INT_RB. We wait for INT_RB to confirm the
+		 * completion of the current message.
+		 */
+		if (!priv->len && (irq_status & UNIPHIER_FI2C_INT_RB))
+			goto data_done;
+
+		if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) {
+			if (priv->len <= UNIPHIER_FI2C_FIFO_SIZE &&
+			    !(priv->flags & UNIPHIER_FI2C_BYTE_WISE)) {
+				dev_dbg(&priv->adap.dev,
+					"enable read byte count IRQ\n");
+				priv->enabled_irqs |= UNIPHIER_FI2C_INT_RB;
+				uniphier_fi2c_set_irqs(priv);
+				priv->flags |= UNIPHIER_FI2C_BYTE_WISE;
+			}
+			if (priv->len <= 1) {
+				dev_dbg(&priv->adap.dev, "set NACK\n");
+				writel(UNIPHIER_FI2C_CR_MST |
+				       UNIPHIER_FI2C_CR_NACK,
+				       priv->membase + UNIPHIER_FI2C_CR);
+			}
+		}
+
+		goto handled;
+	}
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_NONE;
+
+data_done:
+	if (priv->flags & UNIPHIER_FI2C_STOP) {
+stop:
+		uniphier_fi2c_stop(priv);
+	} else {
+complete:
+		priv->enabled_irqs = 0;
+		uniphier_fi2c_set_irqs(priv);
+		complete(&priv->comp);
+	}
+
+handled:
+	/*
+	 * This controller makes a pause while any bit of the IRQ status is
+	 * asserted. Clear the asserted bit to kick the controller just before
+	 * exiting the handler.
+	 */
+	uniphier_fi2c_clear_irqs(priv, irq_status);
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr)
+{
+	priv->enabled_irqs |= UNIPHIER_FI2C_INT_TE;
+	uniphier_fi2c_set_irqs(priv);
+
+	/* do not use TX byte counter */
+	writel(0, priv->membase + UNIPHIER_FI2C_TBC);
+	/* set slave address */
+	writel(UNIPHIER_FI2C_DTTX_CMD | addr << 1,
+	       priv->membase + UNIPHIER_FI2C_DTTX);
+	/* first chunk of data */
+	uniphier_fi2c_fill_txfifo(priv, true);
+}
+
+static void uniphier_fi2c_rx_init(struct uniphier_fi2c_priv *priv, u16 addr)
+{
+	priv->flags |= UNIPHIER_FI2C_RD;
+
+	if (likely(priv->len < 256)) {
+		/*
+		 * If possible, use RX byte counter.
+		 * It can automatically handle NACK for the last byte.
+		 */
+		writel(priv->len, priv->membase + UNIPHIER_FI2C_RBC);
+		priv->enabled_irqs |= UNIPHIER_FI2C_INT_RF |
+				      UNIPHIER_FI2C_INT_RB;
+	} else {
+		/*
+		 * The byte counter can not count over 256.  In this case,
+		 * do not use it at all.  Drain data when FIFO gets full,
+		 * but treat the last portion as a special case.
+		 */
+		writel(0, priv->membase + UNIPHIER_FI2C_RBC);
+		priv->flags |= UNIPHIER_FI2C_MANUAL_NACK;
+		priv->enabled_irqs |= UNIPHIER_FI2C_INT_RF;
+	}
+
+	uniphier_fi2c_set_irqs(priv);
+
+	/* set slave address with RD bit */
+	writel(UNIPHIER_FI2C_DTTX_CMD | UNIPHIER_FI2C_DTTX_RD | addr << 1,
+	       priv->membase + UNIPHIER_FI2C_DTTX);
+}
+
+static void uniphier_fi2c_reset(struct uniphier_fi2c_priv *priv)
+{
+	writel(UNIPHIER_FI2C_RST_RST, priv->membase + UNIPHIER_FI2C_RST);
+}
+
+static void uniphier_fi2c_prepare_operation(struct uniphier_fi2c_priv *priv)
+{
+	writel(UNIPHIER_FI2C_BRST_FOEN | UNIPHIER_FI2C_BRST_RSCL,
+	       priv->membase + UNIPHIER_FI2C_BRST);
+}
+
+static void uniphier_fi2c_recover(struct uniphier_fi2c_priv *priv)
+{
+	uniphier_fi2c_reset(priv);
+	i2c_recover_bus(&priv->adap);
+}
+
+static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
+					 struct i2c_msg *msg, bool repeat,
+					 bool stop)
+{
+	struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
+	bool is_read = msg->flags & I2C_M_RD;
+	unsigned long time_left, flags;
+
+	dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, repeat=%d, stop=%d\n",
+		is_read ? "receive" : "transmit", msg->addr, msg->len,
+		repeat, stop);
+
+	priv->len = msg->len;
+	priv->buf = msg->buf;
+	priv->enabled_irqs = UNIPHIER_FI2C_INT_FAULTS;
+	priv->error = 0;
+	priv->flags = 0;
+
+	if (stop)
+		priv->flags |= UNIPHIER_FI2C_STOP;
+
+	reinit_completion(&priv->comp);
+	uniphier_fi2c_clear_irqs(priv, U32_MAX);
+	writel(UNIPHIER_FI2C_RST_TBRST | UNIPHIER_FI2C_RST_RBRST,
+	       priv->membase + UNIPHIER_FI2C_RST);	/* reset TX/RX FIFO */
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (is_read)
+		uniphier_fi2c_rx_init(priv, msg->addr);
+	else
+		uniphier_fi2c_tx_init(priv, msg->addr);
+
+	dev_dbg(&adap->dev, "start condition\n");
+	/*
+	 * For a repeated START condition, writing a slave address to the FIFO
+	 * kicks the controller. So, the UNIPHIER_FI2C_CR register should be
+	 * written only for a non-repeated START condition.
+	 */
+	if (!repeat)
+		writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STA,
+		       priv->membase + UNIPHIER_FI2C_CR);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->enabled_irqs = 0;
+	uniphier_fi2c_set_irqs(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!time_left) {
+		dev_err(&adap->dev, "transaction timeout.\n");
+		uniphier_fi2c_recover(priv);
+		return -ETIMEDOUT;
+	}
+	dev_dbg(&adap->dev, "complete\n");
+
+	if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) {
+		u32 status;
+		int ret;
+
+		ret = readl_poll_timeout(priv->membase + UNIPHIER_FI2C_SR,
+					 status,
+					 (status & UNIPHIER_FI2C_SR_STS) &&
+					 !(status & UNIPHIER_FI2C_SR_BB),
+					 1, 20);
+		if (ret) {
+			dev_err(&adap->dev,
+				"stop condition was not completed.\n");
+			uniphier_fi2c_recover(priv);
+			return ret;
+		}
+	}
+
+	return priv->error;
+}
+
+static int uniphier_fi2c_check_bus_busy(struct i2c_adapter *adap)
+{
+	struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
+
+	if (readl(priv->membase + UNIPHIER_FI2C_SR) & UNIPHIER_FI2C_SR_DB) {
+		if (priv->busy_cnt++ > 3) {
+			/*
+			 * If bus busy continues too long, it is probably
+			 * in a wrong state.  Try bus recovery.
+			 */
+			uniphier_fi2c_recover(priv);
+			priv->busy_cnt = 0;
+		}
+
+		return -EAGAIN;
+	}
+
+	priv->busy_cnt = 0;
+	return 0;
+}
+
+static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap,
+				     struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *msg, *emsg = msgs + num;
+	bool repeat = false;
+	int ret;
+
+	ret = uniphier_fi2c_check_bus_busy(adap);
+	if (ret)
+		return ret;
+
+	for (msg = msgs; msg < emsg; msg++) {
+		/* Emit STOP if it is the last message or I2C_M_STOP is set. */
+		bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
+
+		ret = uniphier_fi2c_master_xfer_one(adap, msg, repeat, stop);
+		if (ret)
+			return ret;
+
+		repeat = !stop;
+	}
+
+	return num;
+}
+
+static u32 uniphier_fi2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm uniphier_fi2c_algo = {
+	.master_xfer = uniphier_fi2c_master_xfer,
+	.functionality = uniphier_fi2c_functionality,
+};
+
+static int uniphier_fi2c_get_scl(struct i2c_adapter *adap)
+{
+	struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
+
+	return !!(readl(priv->membase + UNIPHIER_FI2C_BM) &
+							UNIPHIER_FI2C_BM_SCLS);
+}
+
+static void uniphier_fi2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
+
+	writel(val ? UNIPHIER_FI2C_BRST_RSCL : 0,
+	       priv->membase + UNIPHIER_FI2C_BRST);
+}
+
+static int uniphier_fi2c_get_sda(struct i2c_adapter *adap)
+{
+	struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
+
+	return !!(readl(priv->membase + UNIPHIER_FI2C_BM) &
+							UNIPHIER_FI2C_BM_SDAS);
+}
+
+static void uniphier_fi2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	uniphier_fi2c_prepare_operation(i2c_get_adapdata(adap));
+}
+
+static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.get_scl = uniphier_fi2c_get_scl,
+	.set_scl = uniphier_fi2c_set_scl,
+	.get_sda = uniphier_fi2c_get_sda,
+	.unprepare_recovery = uniphier_fi2c_unprepare_recovery,
+};
+
+static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv)
+{
+	unsigned int cyc = priv->clk_cycle;
+	u32 tmp;
+
+	tmp = readl(priv->membase + UNIPHIER_FI2C_CR);
+	tmp |= UNIPHIER_FI2C_CR_MST;
+	writel(tmp, priv->membase + UNIPHIER_FI2C_CR);
+
+	uniphier_fi2c_reset(priv);
+
+	/*
+	 *  Standard-mode: tLOW + tHIGH = 10 us
+	 *  Fast-mode:     tLOW + tHIGH = 2.5 us
+	 */
+	writel(cyc, priv->membase + UNIPHIER_FI2C_CYC);
+	/*
+	 *  Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us, tBUF = 4.7 us
+	 *  Fast-mode:     tLOW = 1.3 us, tHIGH = 0.6 us, tBUF = 1.3 us
+	 * "tLow/tHIGH = 5/4" meets both.
+	 */
+	writel(cyc * 5 / 9, priv->membase + UNIPHIER_FI2C_LCTL);
+	/*
+	 *  Standard-mode: tHD;STA = 4.0 us, tSU;STA = 4.7 us, tSU;STO = 4.0 us
+	 *  Fast-mode:     tHD;STA = 0.6 us, tSU;STA = 0.6 us, tSU;STO = 0.6 us
+	 */
+	writel(cyc / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+	/*
+	 *  Standard-mode: tSU;DAT = 250 ns
+	 *  Fast-mode:     tSU;DAT = 100 ns
+	 */
+	writel(cyc / 16, priv->membase + UNIPHIER_FI2C_DSUT);
+
+	uniphier_fi2c_prepare_operation(priv);
+}
+
+static int uniphier_fi2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_fi2c_priv *priv;
+	struct resource *regs;
+	u32 bus_speed;
+	unsigned long clk_rate;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->membase = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(priv->membase))
+		return PTR_ERR(priv->membase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to get IRQ number\n");
+		return irq;
+	}
+
+	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+		bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+
+	if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+		return -EINVAL;
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(priv->clk);
+	if (!clk_rate) {
+		dev_err(dev, "input clock rate should not be zero\n");
+		ret = -EINVAL;
+		goto disable_clk;
+	}
+
+	priv->clk_cycle = clk_rate / bus_speed;
+	init_completion(&priv->comp);
+	spin_lock_init(&priv->lock);
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &uniphier_fi2c_algo;
+	priv->adap.dev.parent = dev;
+	priv->adap.dev.of_node = dev->of_node;
+	strlcpy(priv->adap.name, "UniPhier FI2C", sizeof(priv->adap.name));
+	priv->adap.bus_recovery_info = &uniphier_fi2c_bus_recovery_info;
+	i2c_set_adapdata(&priv->adap, priv);
+	platform_set_drvdata(pdev, priv);
+
+	uniphier_fi2c_hw_init(priv);
+
+	ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0,
+			       pdev->name, priv);
+	if (ret) {
+		dev_err(dev, "failed to request irq %d\n", irq);
+		goto disable_clk;
+	}
+
+	ret = i2c_add_adapter(&priv->adap);
+disable_clk:
+	if (ret)
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
+}
+
+static int uniphier_fi2c_remove(struct platform_device *pdev)
+{
+	struct uniphier_fi2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_fi2c_suspend(struct device *dev)
+{
+	struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_fi2c_resume(struct device *dev)
+{
+	struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	uniphier_fi2c_hw_init(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_fi2c_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(uniphier_fi2c_suspend, uniphier_fi2c_resume)
+};
+
+static const struct of_device_id uniphier_fi2c_match[] = {
+	{ .compatible = "socionext,uniphier-fi2c" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_fi2c_match);
+
+static struct platform_driver uniphier_fi2c_drv = {
+	.probe  = uniphier_fi2c_probe,
+	.remove = uniphier_fi2c_remove,
+	.driver = {
+		.name  = "uniphier-fi2c",
+		.of_match_table = uniphier_fi2c_match,
+		.pm = &uniphier_fi2c_pm_ops,
+	},
+};
+module_platform_driver(uniphier_fi2c_drv);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier FIFO-builtin I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier.c
new file mode 100644
index 0000000..c488e55
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-uniphier.c
@@ -0,0 +1,467 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define UNIPHIER_I2C_DTRM	0x00	/* TX register */
+#define     UNIPHIER_I2C_DTRM_IRQEN	BIT(11)	/* enable interrupt */
+#define     UNIPHIER_I2C_DTRM_STA	BIT(10)	/* start condition */
+#define     UNIPHIER_I2C_DTRM_STO	BIT(9)	/* stop condition */
+#define     UNIPHIER_I2C_DTRM_NACK	BIT(8)	/* do not return ACK */
+#define     UNIPHIER_I2C_DTRM_RD	BIT(0)	/* read transaction */
+#define UNIPHIER_I2C_DREC	0x04	/* RX register */
+#define     UNIPHIER_I2C_DREC_MST	BIT(14)	/* 1 = master, 0 = slave */
+#define     UNIPHIER_I2C_DREC_TX	BIT(13)	/* 1 = transmit, 0 = receive */
+#define     UNIPHIER_I2C_DREC_STS	BIT(12)	/* stop condition detected */
+#define     UNIPHIER_I2C_DREC_LRB	BIT(11)	/* no ACK */
+#define     UNIPHIER_I2C_DREC_LAB	BIT(9)	/* arbitration lost */
+#define     UNIPHIER_I2C_DREC_BBN	BIT(8)	/* bus not busy */
+#define UNIPHIER_I2C_MYAD	0x08	/* slave address */
+#define UNIPHIER_I2C_CLK	0x0c	/* clock frequency control */
+#define UNIPHIER_I2C_BRST	0x10	/* bus reset */
+#define     UNIPHIER_I2C_BRST_FOEN	BIT(1)	/* normal operation */
+#define     UNIPHIER_I2C_BRST_RSCL	BIT(0)	/* release SCL */
+#define UNIPHIER_I2C_HOLD	0x14	/* hold time control */
+#define UNIPHIER_I2C_BSTS	0x18	/* bus status monitor */
+#define     UNIPHIER_I2C_BSTS_SDA	BIT(1)	/* readback of SDA line */
+#define     UNIPHIER_I2C_BSTS_SCL	BIT(0)	/* readback of SCL line */
+#define UNIPHIER_I2C_NOISE	0x1c	/* noise filter control */
+#define UNIPHIER_I2C_SETUP	0x20	/* setup time control */
+
+#define UNIPHIER_I2C_DEFAULT_SPEED	100000
+#define UNIPHIER_I2C_MAX_SPEED		400000
+
+struct uniphier_i2c_priv {
+	struct completion comp;
+	struct i2c_adapter adap;
+	void __iomem *membase;
+	struct clk *clk;
+	unsigned int busy_cnt;
+	unsigned int clk_cycle;
+};
+
+static irqreturn_t uniphier_i2c_interrupt(int irq, void *dev_id)
+{
+	struct uniphier_i2c_priv *priv = dev_id;
+
+	/*
+	 * This hardware uses edge triggered interrupt.  Do not touch the
+	 * hardware registers in this handler to make sure to catch the next
+	 * interrupt edge.  Just send a complete signal and return.
+	 */
+	complete(&priv->comp);
+
+	return IRQ_HANDLED;
+}
+
+static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
+				  u32 *rxdatap)
+{
+	struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+	unsigned long time_left;
+	u32 rxdata;
+
+	reinit_completion(&priv->comp);
+
+	txdata |= UNIPHIER_I2C_DTRM_IRQEN;
+	dev_dbg(&adap->dev, "write data: 0x%04x\n", txdata);
+	writel(txdata, priv->membase + UNIPHIER_I2C_DTRM);
+
+	time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
+	if (unlikely(!time_left)) {
+		dev_err(&adap->dev, "transaction timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	rxdata = readl(priv->membase + UNIPHIER_I2C_DREC);
+	dev_dbg(&adap->dev, "read data: 0x%04x\n", rxdata);
+
+	if (rxdatap)
+		*rxdatap = rxdata;
+
+	return 0;
+}
+
+static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata)
+{
+	u32 rxdata;
+	int ret;
+
+	ret = uniphier_i2c_xfer_byte(adap, txdata, &rxdata);
+	if (ret)
+		return ret;
+
+	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) {
+		dev_dbg(&adap->dev, "arbitration lost\n");
+		return -EAGAIN;
+	}
+	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) {
+		dev_dbg(&adap->dev, "could not get ACK\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len,
+			   const u8 *buf)
+{
+	int ret;
+
+	dev_dbg(&adap->dev, "start condition\n");
+	ret = uniphier_i2c_send_byte(adap, addr << 1 |
+				     UNIPHIER_I2C_DTRM_STA |
+				     UNIPHIER_I2C_DTRM_NACK);
+	if (ret)
+		return ret;
+
+	while (len--) {
+		ret = uniphier_i2c_send_byte(adap,
+					     UNIPHIER_I2C_DTRM_NACK | *buf++);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len,
+			   u8 *buf)
+{
+	int ret;
+
+	dev_dbg(&adap->dev, "start condition\n");
+	ret = uniphier_i2c_send_byte(adap, addr << 1 |
+				     UNIPHIER_I2C_DTRM_STA |
+				     UNIPHIER_I2C_DTRM_NACK |
+				     UNIPHIER_I2C_DTRM_RD);
+	if (ret)
+		return ret;
+
+	while (len--) {
+		u32 rxdata;
+
+		ret = uniphier_i2c_xfer_byte(adap,
+					     len ? 0 : UNIPHIER_I2C_DTRM_NACK,
+					     &rxdata);
+		if (ret)
+			return ret;
+		*buf++ = rxdata;
+	}
+
+	return 0;
+}
+
+static int uniphier_i2c_stop(struct i2c_adapter *adap)
+{
+	dev_dbg(&adap->dev, "stop condition\n");
+	return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO |
+				      UNIPHIER_I2C_DTRM_NACK);
+}
+
+static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap,
+					struct i2c_msg *msg, bool stop)
+{
+	bool is_read = msg->flags & I2C_M_RD;
+	bool recovery = false;
+	int ret;
+
+	dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
+		is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
+
+	if (is_read)
+		ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf);
+	else
+		ret = uniphier_i2c_tx(adap, msg->addr, msg->len, msg->buf);
+
+	if (ret == -EAGAIN) /* could not acquire bus. bail out without STOP */
+		return ret;
+
+	if (ret == -ETIMEDOUT) {
+		/* This error is fatal.  Needs recovery. */
+		stop = false;
+		recovery = true;
+	}
+
+	if (stop) {
+		int ret2 = uniphier_i2c_stop(adap);
+
+		if (ret2) {
+			/* Failed to issue STOP.  The bus needs recovery. */
+			recovery = true;
+			ret = ret ?: ret2;
+		}
+	}
+
+	if (recovery)
+		i2c_recover_bus(adap);
+
+	return ret;
+}
+
+static int uniphier_i2c_check_bus_busy(struct i2c_adapter *adap)
+{
+	struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+	if (!(readl(priv->membase + UNIPHIER_I2C_DREC) &
+						UNIPHIER_I2C_DREC_BBN)) {
+		if (priv->busy_cnt++ > 3) {
+			/*
+			 * If bus busy continues too long, it is probably
+			 * in a wrong state.  Try bus recovery.
+			 */
+			i2c_recover_bus(adap);
+			priv->busy_cnt = 0;
+		}
+
+		return -EAGAIN;
+	}
+
+	priv->busy_cnt = 0;
+	return 0;
+}
+
+static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
+				    struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *msg, *emsg = msgs + num;
+	int ret;
+
+	ret = uniphier_i2c_check_bus_busy(adap);
+	if (ret)
+		return ret;
+
+	for (msg = msgs; msg < emsg; msg++) {
+		/* Emit STOP if it is the last message or I2C_M_STOP is set. */
+		bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
+
+		ret = uniphier_i2c_master_xfer_one(adap, msg, stop);
+		if (ret)
+			return ret;
+	}
+
+	return num;
+}
+
+static u32 uniphier_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm uniphier_i2c_algo = {
+	.master_xfer = uniphier_i2c_master_xfer,
+	.functionality = uniphier_i2c_functionality,
+};
+
+static void uniphier_i2c_reset(struct uniphier_i2c_priv *priv, bool reset_on)
+{
+	u32 val = UNIPHIER_I2C_BRST_RSCL;
+
+	val |= reset_on ? 0 : UNIPHIER_I2C_BRST_FOEN;
+	writel(val, priv->membase + UNIPHIER_I2C_BRST);
+}
+
+static int uniphier_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+	return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
+							UNIPHIER_I2C_BSTS_SCL);
+}
+
+static void uniphier_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+	writel(val ? UNIPHIER_I2C_BRST_RSCL : 0,
+	       priv->membase + UNIPHIER_I2C_BRST);
+}
+
+static int uniphier_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+	return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
+							UNIPHIER_I2C_BSTS_SDA);
+}
+
+static void uniphier_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	uniphier_i2c_reset(i2c_get_adapdata(adap), false);
+}
+
+static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
+	.recover_bus = i2c_generic_scl_recovery,
+	.get_scl = uniphier_i2c_get_scl,
+	.set_scl = uniphier_i2c_set_scl,
+	.get_sda = uniphier_i2c_get_sda,
+	.unprepare_recovery = uniphier_i2c_unprepare_recovery,
+};
+
+static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv)
+{
+	unsigned int cyc = priv->clk_cycle;
+
+	uniphier_i2c_reset(priv, true);
+
+	/*
+	 * Bit30-16: clock cycles of tLOW.
+	 *  Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us
+	 *  Fast-mode:     tLOW = 1.3 us, tHIGH = 0.6 us
+	 * "tLow/tHIGH = 5/4" meets both.
+	 */
+	writel((cyc * 5 / 9 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
+
+	uniphier_i2c_reset(priv, false);
+}
+
+static int uniphier_i2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_i2c_priv *priv;
+	struct resource *regs;
+	u32 bus_speed;
+	unsigned long clk_rate;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->membase = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(priv->membase))
+		return PTR_ERR(priv->membase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to get IRQ number\n");
+		return irq;
+	}
+
+	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+		bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+
+	if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+		return -EINVAL;
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(priv->clk);
+	if (!clk_rate) {
+		dev_err(dev, "input clock rate should not be zero\n");
+		ret = -EINVAL;
+		goto disable_clk;
+	}
+
+	priv->clk_cycle = clk_rate / bus_speed;
+	init_completion(&priv->comp);
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &uniphier_i2c_algo;
+	priv->adap.dev.parent = dev;
+	priv->adap.dev.of_node = dev->of_node;
+	strlcpy(priv->adap.name, "UniPhier I2C", sizeof(priv->adap.name));
+	priv->adap.bus_recovery_info = &uniphier_i2c_bus_recovery_info;
+	i2c_set_adapdata(&priv->adap, priv);
+	platform_set_drvdata(pdev, priv);
+
+	uniphier_i2c_hw_init(priv);
+
+	ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
+			       priv);
+	if (ret) {
+		dev_err(dev, "failed to request irq %d\n", irq);
+		goto disable_clk;
+	}
+
+	ret = i2c_add_adapter(&priv->adap);
+disable_clk:
+	if (ret)
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
+}
+
+static int uniphier_i2c_remove(struct platform_device *pdev)
+{
+	struct uniphier_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_i2c_suspend(struct device *dev)
+{
+	struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_i2c_resume(struct device *dev)
+{
+	struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	uniphier_i2c_hw_init(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_i2c_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(uniphier_i2c_suspend, uniphier_i2c_resume)
+};
+
+static const struct of_device_id uniphier_i2c_match[] = {
+	{ .compatible = "socionext,uniphier-i2c" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_i2c_match);
+
+static struct platform_driver uniphier_i2c_drv = {
+	.probe  = uniphier_i2c_probe,
+	.remove = uniphier_i2c_remove,
+	.driver = {
+		.name  = "uniphier-i2c",
+		.of_match_table = uniphier_i2c_match,
+		.pm = &uniphier_i2c_pm_ops,
+	},
+};
+module_platform_driver(uniphier_i2c_drv);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-versatile.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-versatile.c
new file mode 100644
index 0000000..f1ab2a6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-versatile.c
@@ -0,0 +1,140 @@
+/*
+ *  i2c-versatile.c
+ *
+ *  Copyright (C) 2006 ARM Ltd.
+ *  written by Russell King, Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#define I2C_CONTROL	0x00
+#define I2C_CONTROLS	0x00
+#define I2C_CONTROLC	0x04
+#define SCL		(1 << 0)
+#define SDA		(1 << 1)
+
+struct i2c_versatile {
+	struct i2c_adapter	 adap;
+	struct i2c_algo_bit_data algo;
+	void __iomem		 *base;
+};
+
+static void i2c_versatile_setsda(void *data, int state)
+{
+	struct i2c_versatile *i2c = data;
+
+	writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static void i2c_versatile_setscl(void *data, int state)
+{
+	struct i2c_versatile *i2c = data;
+
+	writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static int i2c_versatile_getsda(void *data)
+{
+	struct i2c_versatile *i2c = data;
+	return !!(readl(i2c->base + I2C_CONTROL) & SDA);
+}
+
+static int i2c_versatile_getscl(void *data)
+{
+	struct i2c_versatile *i2c = data;
+	return !!(readl(i2c->base + I2C_CONTROL) & SCL);
+}
+
+static const struct i2c_algo_bit_data i2c_versatile_algo = {
+	.setsda	= i2c_versatile_setsda,
+	.setscl = i2c_versatile_setscl,
+	.getsda	= i2c_versatile_getsda,
+	.getscl = i2c_versatile_getscl,
+	.udelay	= 30,
+	.timeout = HZ,
+};
+
+static int i2c_versatile_probe(struct platform_device *dev)
+{
+	struct i2c_versatile *i2c;
+	struct resource *r;
+	int ret;
+
+	i2c = devm_kzalloc(&dev->dev, sizeof(struct i2c_versatile), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&dev->dev, r);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	writel(SCL | SDA, i2c->base + I2C_CONTROLS);
+
+	i2c->adap.owner = THIS_MODULE;
+	strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name));
+	i2c->adap.algo_data = &i2c->algo;
+	i2c->adap.dev.parent = &dev->dev;
+	i2c->adap.dev.of_node = dev->dev.of_node;
+	i2c->algo = i2c_versatile_algo;
+	i2c->algo.data = i2c;
+
+	i2c->adap.nr = dev->id;
+	ret = i2c_bit_add_numbered_bus(&i2c->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(dev, i2c);
+
+	return 0;
+}
+
+static int i2c_versatile_remove(struct platform_device *dev)
+{
+	struct i2c_versatile *i2c = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+}
+
+static const struct of_device_id i2c_versatile_match[] = {
+	{ .compatible = "arm,versatile-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_versatile_match);
+
+static struct platform_driver i2c_versatile_driver = {
+	.probe		= i2c_versatile_probe,
+	.remove		= i2c_versatile_remove,
+	.driver		= {
+		.name	= "versatile-i2c",
+		.of_match_table = i2c_versatile_match,
+	},
+};
+
+static int __init i2c_versatile_init(void)
+{
+	return platform_driver_register(&i2c_versatile_driver);
+}
+
+static void __exit i2c_versatile_exit(void)
+{
+	platform_driver_unregister(&i2c_versatile_driver);
+}
+
+subsys_initcall(i2c_versatile_init);
+module_exit(i2c_versatile_exit);
+
+MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:versatile-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-via.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-via.c
new file mode 100644
index 0000000..59b1d23
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-via.c
@@ -0,0 +1,163 @@
+/*
+    i2c Support for Via Technologies 82C586B South Bridge
+
+    Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
+
+/* Power management registers */
+#define PM_CFG_REVID	0x08	/* silicon revision code */
+#define PM_CFG_IOBASE0	0x20
+#define PM_CFG_IOBASE1	0x48
+
+#define I2C_DIR		(pm_io_base+0x40)
+#define I2C_OUT		(pm_io_base+0x42)
+#define I2C_IN		(pm_io_base+0x44)
+#define I2C_SCL		0x02	/* clock bit in DIR/OUT/IN register */
+#define I2C_SDA		0x04
+
+/* io-region reservation */
+#define IOSPACE		0x06
+
+static struct pci_driver vt586b_driver;
+static u16 pm_io_base;
+
+/*
+   It does not appear from the datasheet that the GPIO pins are
+   open drain. So a we set a low value by setting the direction to
+   output and a high value by setting the direction to input and
+   relying on the required I2C pullup. The data value is initialized
+   to 0 in via_init() and never changed.
+*/
+static void bit_via_setscl(void *data, int state)
+{
+	outb(state ? inb(I2C_DIR) & ~I2C_SCL : inb(I2C_DIR) | I2C_SCL, I2C_DIR);
+}
+
+static void bit_via_setsda(void *data, int state)
+{
+	outb(state ? inb(I2C_DIR) & ~I2C_SDA : inb(I2C_DIR) | I2C_SDA, I2C_DIR);
+}
+
+static int bit_via_getscl(void *data)
+{
+	return (0 != (inb(I2C_IN) & I2C_SCL));
+}
+
+static int bit_via_getsda(void *data)
+{
+	return (0 != (inb(I2C_IN) & I2C_SDA));
+}
+
+
+static struct i2c_algo_bit_data bit_data = {
+	.setsda		= bit_via_setsda,
+	.setscl		= bit_via_setscl,
+	.getsda		= bit_via_getsda,
+	.getscl		= bit_via_getscl,
+	.udelay		= 5,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter vt586b_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.name		= "VIA i2c",
+	.algo_data	= &bit_data,
+};
+
+
+static const struct pci_device_id vt586b_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, vt586b_ids);
+
+static int vt586b_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u16 base;
+	u8 rev;
+	int res;
+
+	if (pm_io_base) {
+		dev_err(&dev->dev, "i2c-via: Will only support one host\n");
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(dev, PM_CFG_REVID, &rev);
+
+	switch (rev) {
+	case 0x00:
+		base = PM_CFG_IOBASE0;
+		break;
+	case 0x01:
+	case 0x10:
+		base = PM_CFG_IOBASE1;
+		break;
+
+	default:
+		base = PM_CFG_IOBASE1;
+		/* later revision */
+	}
+
+	pci_read_config_word(dev, base, &pm_io_base);
+	pm_io_base &= (0xff << 8);
+
+	if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) {
+		dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
+		return -ENODEV;
+	}
+
+	outb(inb(I2C_DIR) & ~(I2C_SDA | I2C_SCL), I2C_DIR);
+	outb(inb(I2C_OUT) & ~(I2C_SDA | I2C_SCL), I2C_OUT);
+
+	/* set up the sysfs linkage to our parent device */
+	vt586b_adapter.dev.parent = &dev->dev;
+
+	res = i2c_bit_add_bus(&vt586b_adapter);
+	if ( res < 0 ) {
+		release_region(I2C_DIR, IOSPACE);
+		pm_io_base = 0;
+		return res;
+	}
+	return 0;
+}
+
+static void vt586b_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&vt586b_adapter);
+	release_region(I2C_DIR, IOSPACE);
+	pm_io_base = 0;
+}
+
+
+static struct pci_driver vt586b_driver = {
+	.name		= "vt586b_smbus",
+	.id_table	= vt586b_ids,
+	.probe		= vt586b_probe,
+	.remove		= vt586b_remove,
+};
+
+module_pci_driver(vt586b_driver);
+
+MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>");
+MODULE_DESCRIPTION("i2c for Via vt82c586b southbridge");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viapro.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viapro.c
new file mode 100644
index 0000000..0dc45e1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viapro.c
@@ -0,0 +1,507 @@
+/*
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Copyright (C) 2005 - 2008  Jean Delvare <jdelvare@suse.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/*
+   Supports the following VIA south bridges:
+
+   Chip name          PCI ID  REV     I2C block
+   VT82C596A          0x3050             no
+   VT82C596B          0x3051             no
+   VT82C686A          0x3057  0x30       no
+   VT82C686B          0x3057  0x40       yes
+   VT8231             0x8235             no?
+   VT8233             0x3074             yes
+   VT8233A            0x3147             yes?
+   VT8235             0x3177             yes
+   VT8237R            0x3227             yes
+   VT8237A            0x3337             yes
+   VT8237S            0x3372             yes
+   VT8251             0x3287             yes
+   CX700              0x8324             yes
+   VX800/VX820        0x8353             yes
+   VX855/VX875        0x8409             yes
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+static struct pci_dev *vt596_pdev;
+
+#define SMBBA1		0x90
+#define SMBBA2		0x80
+#define SMBBA3		0xD0
+
+/* SMBus address offsets */
+static unsigned short vt596_smba;
+#define SMBHSTSTS	(vt596_smba + 0)
+#define SMBHSTCNT	(vt596_smba + 2)
+#define SMBHSTCMD	(vt596_smba + 3)
+#define SMBHSTADD	(vt596_smba + 4)
+#define SMBHSTDAT0	(vt596_smba + 5)
+#define SMBHSTDAT1	(vt596_smba + 6)
+#define SMBBLKDAT	(vt596_smba + 7)
+
+/* PCI Address Constants */
+
+/* SMBus data in configuration space can be found in two places,
+   We try to select the better one */
+
+static unsigned short SMBHSTCFG = 0xD2;
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+
+/* VT82C596 constants */
+#define VT596_QUICK		0x00
+#define VT596_BYTE		0x04
+#define VT596_BYTE_DATA		0x08
+#define VT596_WORD_DATA		0x0C
+#define VT596_PROC_CALL		0x10
+#define VT596_BLOCK_DATA	0x14
+#define VT596_I2C_BLOCK_DATA	0x34
+
+
+/* If force is set to anything different from 0, we forcibly enable the
+   VT596. DANGEROUS! */
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the VT596 at the given address. VERY DANGEROUS! */
+static u16 force_addr;
+module_param_hw(force_addr, ushort, ioport, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the SMBus at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+
+static struct pci_driver vt596_driver;
+static struct i2c_adapter vt596_adapter;
+
+#define FEATURE_I2CBLOCK	(1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+	dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+		"DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	if (size == VT596_BLOCK_DATA
+	 || size == VT596_I2C_BLOCK_DATA) {
+		int i;
+
+		dev_dbg(&vt596_adapter.dev, "BLK=");
+		for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+			printk("%02x,", inb_p(SMBBLKDAT));
+		printk("\n");
+		dev_dbg(&vt596_adapter.dev, "    ");
+		for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+			printk("%02x,", inb_p(SMBBLKDAT));
+		printk("%02x\n", inb_p(SMBBLKDAT));
+	}
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	vt596_dump_regs("Transaction (pre)", size);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+		dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
+			"Resetting...\n", temp);
+
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+			dev_err(&vt596_adapter.dev, "SMBus reset failed! "
+				"(0x%02x)\n", temp);
+			return -EBUSY;
+		}
+	}
+
+	/* Start the transaction by setting bit 6 */
+	outb_p(0x40 | size, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second */
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout == MAX_TIMEOUT) {
+		result = -ETIMEDOUT;
+		dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
+	}
+
+	if (temp & 0x10) {
+		result = -EIO;
+		dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+			size);
+	}
+
+	if (temp & 0x08) {
+		result = -EIO;
+		dev_err(&vt596_adapter.dev, "SMBus collision!\n");
+	}
+
+	if (temp & 0x04) {
+		result = -ENXIO;
+		dev_dbg(&vt596_adapter.dev, "No response\n");
+	}
+
+	/* Resetting status register */
+	if (temp & 0x1F)
+		outb_p(temp, SMBHSTSTS);
+
+	vt596_dump_regs("Transaction (post)", size);
+
+	return result;
+}
+
+/* Return negative errno on error, 0 on success */
+static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
+		unsigned short flags, char read_write, u8 command,
+		int size, union i2c_smbus_data *data)
+{
+	int i;
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		size = VT596_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = VT596_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = VT596_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = VT596_WORD_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		outb_p(command, SMBHSTCMD);
+		outb_p(data->word & 0xff, SMBHSTDAT0);
+		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		size = VT596_PROC_CALL;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (!(vt596_features & FEATURE_I2CBLOCK))
+			goto exit_unsupported;
+		if (read_write == I2C_SMBUS_READ)
+			outb_p(data->block[0], SMBHSTDAT0);
+		/* Fall through */
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			u8 len = data->block[0];
+			if (len > I2C_SMBUS_BLOCK_MAX)
+				len = I2C_SMBUS_BLOCK_MAX;
+			outb_p(len, SMBHSTDAT0);
+			inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+		       VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
+		break;
+	default:
+		goto exit_unsupported;
+	}
+
+	outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
+
+	status = vt596_transaction(size);
+	if (status)
+		return status;
+
+	if (size == VT596_PROC_CALL)
+		read_write = I2C_SMBUS_READ;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
+		return 0;
+
+	switch (size) {
+	case VT596_BYTE:
+	case VT596_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case VT596_WORD_DATA:
+	case VT596_PROC_CALL:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case VT596_I2C_BLOCK_DATA:
+	case VT596_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+		inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+
+exit_unsupported:
+	dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
+		 size);
+	return -EOPNOTSUPP;
+}
+
+static u32 vt596_func(struct i2c_adapter *adapter)
+{
+	u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;
+
+	if (vt596_features & FEATURE_I2CBLOCK)
+		func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+	return func;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= vt596_access,
+	.functionality	= vt596_func,
+};
+
+static struct i2c_adapter vt596_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static int vt596_probe(struct pci_dev *pdev,
+		       const struct pci_device_id *id)
+{
+	unsigned char temp;
+	int error;
+
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		vt596_smba = force_addr & 0xfff0;
+		force = 0;
+		goto found;
+	}
+
+	if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
+	    !(vt596_smba & 0x0001)) {
+		/* try 2nd address and config reg. for 596 */
+		if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
+		    !pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
+		    (vt596_smba & 0x0001)) {
+			SMBHSTCFG = 0x84;
+		} else {
+			/* no matches at all */
+			dev_err(&pdev->dev, "Cannot configure "
+				"SMBus I/O Base address\n");
+			return -ENODEV;
+		}
+	}
+
+	vt596_smba &= 0xfff0;
+	if (vt596_smba == 0) {
+		dev_err(&pdev->dev, "SMBus base address "
+			"uninitialized - upgrade BIOS or use "
+			"force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+found:
+	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
+	if (error)
+		return -ENODEV;
+
+	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
+		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
+			vt596_smba);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(pdev, SMBHSTCFG, &temp);
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the VT596 first. */
+	if (force_addr) {
+		pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(pdev, id->driver_data, vt596_smba);
+		pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
+		dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
+			 "address 0x%04x!\n", vt596_smba);
+	} else if (!(temp & 0x01)) {
+		if (force) {
+			/* NOTE: This assumes I/O space and other allocations
+			 * WERE done by the Bios!  Don't complain if your
+			 * hardware does weird things after enabling this.
+			 * :') Check for Bios updates before resorting to
+			 * this.
+			 */
+			pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
+			dev_info(&pdev->dev, "Enabling SMBus device\n");
+		} else {
+			dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
+				"controller not enabled! - upgrade BIOS or "
+				"use force=1\n");
+			error = -ENODEV;
+			goto release_region;
+		}
+	}
+
+	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_VIA_CX700:
+	case PCI_DEVICE_ID_VIA_VX800:
+	case PCI_DEVICE_ID_VIA_VX855:
+	case PCI_DEVICE_ID_VIA_VX900:
+	case PCI_DEVICE_ID_VIA_8251:
+	case PCI_DEVICE_ID_VIA_8237:
+	case PCI_DEVICE_ID_VIA_8237A:
+	case PCI_DEVICE_ID_VIA_8237S:
+	case PCI_DEVICE_ID_VIA_8235:
+	case PCI_DEVICE_ID_VIA_8233A:
+	case PCI_DEVICE_ID_VIA_8233_0:
+		vt596_features |= FEATURE_I2CBLOCK;
+		break;
+	case PCI_DEVICE_ID_VIA_82C686_4:
+		/* The VT82C686B (rev 0x40) does support I2C block
+		   transactions, but the VT82C686A (rev 0x30) doesn't */
+		if (pdev->revision >= 0x40)
+			vt596_features |= FEATURE_I2CBLOCK;
+		break;
+	}
+
+	vt596_adapter.dev.parent = &pdev->dev;
+	snprintf(vt596_adapter.name, sizeof(vt596_adapter.name),
+		 "SMBus Via Pro adapter at %04x", vt596_smba);
+
+	vt596_pdev = pci_dev_get(pdev);
+	error = i2c_add_adapter(&vt596_adapter);
+	if (error) {
+		pci_dev_put(vt596_pdev);
+		vt596_pdev = NULL;
+		goto release_region;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+
+release_region:
+	release_region(vt596_smba, 8);
+	return error;
+}
+
+static const struct pci_device_id vt596_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237S),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX900),
+	  .driver_data = SMBBA3 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, vt596_ids);
+
+static struct pci_driver vt596_driver = {
+	.name		= "vt596_smbus",
+	.id_table	= vt596_ids,
+	.probe		= vt596_probe,
+};
+
+static int __init i2c_vt596_init(void)
+{
+	return pci_register_driver(&vt596_driver);
+}
+
+
+static void __exit i2c_vt596_exit(void)
+{
+	pci_unregister_driver(&vt596_driver);
+	if (vt596_pdev != NULL) {
+		i2c_del_adapter(&vt596_adapter);
+		release_region(vt596_smba, 8);
+		pci_dev_put(vt596_pdev);
+		vt596_pdev = NULL;
+	}
+}
+
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
+	      "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
+	      "Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("vt82c596 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_vt596_init);
+module_exit(i2c_vt596_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viperboard.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viperboard.c
new file mode 100644
index 0000000..7235c73
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-viperboard.c
@@ -0,0 +1,473 @@
+/*
+ *  Nano River Technologies viperboard i2c master driver
+ *
+ *  (C) 2012 by Lemonage GmbH
+ *  Author: Lars Poeschel <poeschel@lemonage.de>
+ *  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/viperboard.h>
+
+struct vprbrd_i2c {
+	struct i2c_adapter i2c;
+	u8 bus_freq_param;
+};
+
+/* i2c bus frequency module parameter */
+static u8 i2c_bus_param;
+static unsigned int i2c_bus_freq = 100;
+module_param(i2c_bus_freq, int, 0);
+MODULE_PARM_DESC(i2c_bus_freq,
+	"i2c bus frequency in khz (default is 100) valid values: 10, 100, 200, 400, 1000, 3000, 6000");
+
+static int vprbrd_i2c_status(struct i2c_adapter *i2c,
+	struct vprbrd_i2c_status *status, bool prev_error)
+{
+	u16 bytes_xfer;
+	int ret;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+
+	/* check for protocol error */
+	bytes_xfer = sizeof(struct vprbrd_i2c_status);
+
+	ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_I2C, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000,
+		status, bytes_xfer, VPRBRD_USB_TIMEOUT_MS);
+
+	if (ret != bytes_xfer)
+		prev_error = true;
+
+	if (prev_error) {
+		dev_err(&i2c->dev, "failure in usb communication\n");
+		return -EREMOTEIO;
+	}
+
+	dev_dbg(&i2c->dev, "  status = %d\n", status->status);
+	if (status->status != 0x00) {
+		dev_err(&i2c->dev, "failure: i2c protocol error\n");
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_receive(struct usb_device *usb_dev,
+	struct vprbrd_i2c_read_msg *rmsg, int bytes_xfer)
+{
+	int ret, bytes_actual;
+	int error = 0;
+
+	/* send the read request */
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), rmsg,
+		sizeof(struct vprbrd_i2c_read_hdr), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0)
+		|| (bytes_actual != sizeof(struct vprbrd_i2c_read_hdr))) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		error = -EREMOTEIO;
+	}
+
+	/* read the actual data */
+	ret = usb_bulk_msg(usb_dev,
+		usb_rcvbulkpipe(usb_dev, VPRBRD_EP_IN), rmsg,
+		bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) || (bytes_xfer != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure receiving usb\n");
+		error = -EREMOTEIO;
+	}
+	return error;
+}
+
+static int vprbrd_i2c_addr(struct usb_device *usb_dev,
+	struct vprbrd_i2c_addr_msg *amsg)
+{
+	int ret, bytes_actual;
+
+	ret = usb_bulk_msg(usb_dev,
+		usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), amsg,
+		sizeof(struct vprbrd_i2c_addr_msg), &bytes_actual,
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if ((ret < 0) ||
+			(sizeof(struct vprbrd_i2c_addr_msg) != bytes_actual)) {
+		dev_err(&usb_dev->dev, "failure transmitting usb\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret;
+	u16 remain_len, len1, len2, start = 0x0000;
+	struct vprbrd_i2c_read_msg *rmsg =
+		(struct vprbrd_i2c_read_msg *)vb->buf;
+
+	remain_len = msg->len;
+	rmsg->header.cmd = VPRBRD_I2C_CMD_READ;
+	while (remain_len > 0) {
+		rmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len <= 255) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len;
+			rmsg->header.len1 = 0x00;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 510) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 255;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0x00;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 512) {
+			len1 = remain_len;
+			len2 = 0x00;
+			rmsg->header.len0 = remain_len - 510;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x00;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 767) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 512;
+			rmsg->header.len4 = 0x00;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1022) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 767;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0x00;
+			remain_len = 0;
+		} else if (remain_len <= 1024) {
+			len1 = 512;
+			len2 = remain_len - 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = remain_len - 1022;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len = 0;
+		} else {
+			len1 = 512;
+			len2 = 512;
+			rmsg->header.len0 = 0x02;
+			rmsg->header.len1 = 0xff;
+			rmsg->header.len2 = 0xff;
+			rmsg->header.len3 = 0x02;
+			rmsg->header.len4 = 0xff;
+			rmsg->header.len5 = 0xff;
+			remain_len -= 1024;
+			start += 1024;
+		}
+		rmsg->header.tf1 = cpu_to_le16(len1);
+		rmsg->header.tf2 = cpu_to_le16(len2);
+
+		/* first read transfer */
+		ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len1);
+		if (ret < 0)
+			return ret;
+		/* copy the received data */
+		memcpy(msg->buf + start, rmsg, len1);
+
+		/* second read transfer if neccessary */
+		if (len2 > 0) {
+			ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
+			if (ret < 0)
+				return ret;
+			/* copy the received data */
+			memcpy(msg->buf + start + 512, rmsg, len2);
+		}
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_write(struct vprbrd *vb, struct i2c_msg *msg)
+{
+	int ret, bytes_actual;
+	u16 remain_len, bytes_xfer,
+		start = 0x0000;
+	struct vprbrd_i2c_write_msg *wmsg =
+		(struct vprbrd_i2c_write_msg *)vb->buf;
+
+	remain_len = msg->len;
+	wmsg->header.cmd = VPRBRD_I2C_CMD_WRITE;
+	wmsg->header.last = 0x00;
+	wmsg->header.chan = 0x00;
+	wmsg->header.spi = 0x0000;
+	while (remain_len > 0) {
+		wmsg->header.addr = cpu_to_le16(start + 0x4000);
+		if (remain_len > 503) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = 0xf8;
+			remain_len -= 503;
+			bytes_xfer = 503 + sizeof(struct vprbrd_i2c_write_hdr);
+			start += 503;
+		} else if (remain_len > 255) {
+			wmsg->header.len1 = 0xff;
+			wmsg->header.len2 = (remain_len - 255);
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		} else {
+			wmsg->header.len1 = remain_len;
+			wmsg->header.len2 = 0x00;
+			bytes_xfer = remain_len +
+				sizeof(struct vprbrd_i2c_write_hdr);
+			remain_len = 0;
+		}
+		memcpy(wmsg->data, msg->buf + start,
+			bytes_xfer - sizeof(struct vprbrd_i2c_write_hdr));
+
+		ret = usb_bulk_msg(vb->usb_dev,
+			usb_sndbulkpipe(vb->usb_dev,
+			VPRBRD_EP_OUT), wmsg,
+			bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+		if ((ret < 0) || (bytes_xfer != bytes_actual))
+			return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
+		int num)
+{
+	struct i2c_msg *pmsg;
+	int i, ret,
+		error = 0;
+	struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+	struct vprbrd_i2c_addr_msg *amsg =
+		(struct vprbrd_i2c_addr_msg *)vb->buf;
+	struct vprbrd_i2c_status *smsg = (struct vprbrd_i2c_status *)vb->buf;
+
+	dev_dbg(&i2c->dev, "master xfer %d messages:\n", num);
+
+	for (i = 0 ; i < num ; i++) {
+		pmsg = &msgs[i];
+
+		dev_dbg(&i2c->dev,
+			"  %d: %s (flags %d) %d bytes to 0x%02x\n",
+			i, pmsg->flags & I2C_M_RD ? "read" : "write",
+			pmsg->flags, pmsg->len, pmsg->addr);
+
+		mutex_lock(&vb->lock);
+		/* directly send the message */
+		if (pmsg->flags & I2C_M_RD) {
+			/* read data */
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x01;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr and len, we're interested to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_read(vb, pmsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+			/* in case of protocol error, return the error */
+			if (error < 0)
+				goto error;
+		} else {
+			/* write data */
+			ret = vprbrd_i2c_write(vb, pmsg);
+
+			amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+			amsg->unknown2 = 0x00;
+			amsg->unknown3 = 0x00;
+			amsg->addr = pmsg->addr;
+			amsg->unknown1 = 0x00;
+			amsg->len = cpu_to_le16(pmsg->len);
+			/* send the addr, the data goes to to board */
+			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+			if (ret < 0)
+				error = ret;
+
+			ret = vprbrd_i2c_status(i2c, smsg, error);
+			if (ret < 0)
+				error = ret;
+
+			if (error < 0)
+				goto error;
+		}
+		mutex_unlock(&vb->lock);
+	}
+	return num;
+error:
+	mutex_unlock(&vb->lock);
+	return error;
+}
+
+static u32 vprbrd_i2c_func(struct i2c_adapter *i2c)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm vprbrd_algorithm = {
+	.master_xfer	= vprbrd_i2c_xfer,
+	.functionality	= vprbrd_i2c_func,
+};
+
+static const struct i2c_adapter_quirks vprbrd_quirks = {
+	.max_read_len = 2048,
+	.max_write_len = 2048,
+};
+
+static int vprbrd_i2c_probe(struct platform_device *pdev)
+{
+	struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
+	struct vprbrd_i2c *vb_i2c;
+	int ret;
+	int pipe;
+
+	vb_i2c = devm_kzalloc(&pdev->dev, sizeof(*vb_i2c), GFP_KERNEL);
+	if (vb_i2c == NULL)
+		return -ENOMEM;
+
+	/* setup i2c adapter description */
+	vb_i2c->i2c.owner = THIS_MODULE;
+	vb_i2c->i2c.class = I2C_CLASS_HWMON;
+	vb_i2c->i2c.algo = &vprbrd_algorithm;
+	vb_i2c->i2c.quirks = &vprbrd_quirks;
+	vb_i2c->i2c.algo_data = vb;
+	/* save the param in usb capabable memory */
+	vb_i2c->bus_freq_param = i2c_bus_param;
+
+	snprintf(vb_i2c->i2c.name, sizeof(vb_i2c->i2c.name),
+		 "viperboard at bus %03d device %03d",
+		 vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
+
+	/* setting the bus frequency */
+	if ((i2c_bus_param <= VPRBRD_I2C_FREQ_10KHZ)
+		&& (i2c_bus_param >= VPRBRD_I2C_FREQ_6MHZ)) {
+		pipe = usb_sndctrlpipe(vb->usb_dev, 0);
+		ret = usb_control_msg(vb->usb_dev, pipe,
+			VPRBRD_USB_REQUEST_I2C_FREQ, VPRBRD_USB_TYPE_OUT,
+			0x0000, 0x0000, &vb_i2c->bus_freq_param, 1,
+			VPRBRD_USB_TIMEOUT_MS);
+		if (ret != 1) {
+			dev_err(&pdev->dev, "failure setting i2c_bus_freq to %d\n",
+				i2c_bus_freq);
+			return -EIO;
+		}
+	} else {
+		dev_err(&pdev->dev,
+			"invalid i2c_bus_freq setting:%d\n", i2c_bus_freq);
+		return -EIO;
+	}
+
+	vb_i2c->i2c.dev.parent = &pdev->dev;
+
+	/* attach to i2c layer */
+	i2c_add_adapter(&vb_i2c->i2c);
+
+	platform_set_drvdata(pdev, vb_i2c);
+
+	return 0;
+}
+
+static int vprbrd_i2c_remove(struct platform_device *pdev)
+{
+	struct vprbrd_i2c *vb_i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&vb_i2c->i2c);
+
+	return 0;
+}
+
+static struct platform_driver vprbrd_i2c_driver = {
+	.driver.name	= "viperboard-i2c",
+	.driver.owner	= THIS_MODULE,
+	.probe		= vprbrd_i2c_probe,
+	.remove		= vprbrd_i2c_remove,
+};
+
+static int __init vprbrd_i2c_init(void)
+{
+	switch (i2c_bus_freq) {
+	case 6000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_6MHZ;
+		break;
+	case 3000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_3MHZ;
+		break;
+	case 1000:
+		i2c_bus_param = VPRBRD_I2C_FREQ_1MHZ;
+		break;
+	case 400:
+		i2c_bus_param = VPRBRD_I2C_FREQ_400KHZ;
+		break;
+	case 200:
+		i2c_bus_param = VPRBRD_I2C_FREQ_200KHZ;
+		break;
+	case 100:
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+		break;
+	case 10:
+		i2c_bus_param = VPRBRD_I2C_FREQ_10KHZ;
+		break;
+	default:
+		pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq);
+		i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+	}
+
+	return platform_driver_register(&vprbrd_i2c_driver);
+}
+subsys_initcall(vprbrd_i2c_init);
+
+static void __exit vprbrd_i2c_exit(void)
+{
+	platform_driver_unregister(&vprbrd_i2c_driver);
+}
+module_exit(vprbrd_i2c_exit);
+
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("I2C master driver for Nano River Techs Viperboard");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:viperboard-i2c");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-wmt.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-wmt.c
new file mode 100644
index 0000000..fbd0fd5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-wmt.c
@@ -0,0 +1,474 @@
+/*
+ *  Wondermedia I2C Master Mode Driver
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ *  Derived from GPLv2+ licensed source:
+ *  - Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2, or
+ *  (at your option) any later version. as published by the Free Software
+ *  Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#define REG_CR		0x00
+#define REG_TCR		0x02
+#define REG_CSR		0x04
+#define REG_ISR		0x06
+#define REG_IMR		0x08
+#define REG_CDR		0x0A
+#define REG_TR		0x0C
+#define REG_MCR		0x0E
+#define REG_SLAVE_CR	0x10
+#define REG_SLAVE_SR	0x12
+#define REG_SLAVE_ISR	0x14
+#define REG_SLAVE_IMR	0x16
+#define REG_SLAVE_DR	0x18
+#define REG_SLAVE_TR	0x1A
+
+/* REG_CR Bit fields */
+#define CR_TX_NEXT_ACK		0x0000
+#define CR_ENABLE		0x0001
+#define CR_TX_NEXT_NO_ACK	0x0002
+#define CR_TX_END		0x0004
+#define CR_CPU_RDY		0x0008
+#define SLAV_MODE_SEL		0x8000
+
+/* REG_TCR Bit fields */
+#define TCR_STANDARD_MODE	0x0000
+#define TCR_MASTER_WRITE	0x0000
+#define TCR_HS_MODE		0x2000
+#define TCR_MASTER_READ		0x4000
+#define TCR_FAST_MODE		0x8000
+#define TCR_SLAVE_ADDR_MASK	0x007F
+
+/* REG_ISR Bit fields */
+#define ISR_NACK_ADDR		0x0001
+#define ISR_BYTE_END		0x0002
+#define ISR_SCL_TIMEOUT		0x0004
+#define ISR_WRITE_ALL		0x0007
+
+/* REG_IMR Bit fields */
+#define IMR_ENABLE_ALL		0x0007
+
+/* REG_CSR Bit fields */
+#define CSR_RCV_NOT_ACK		0x0001
+#define CSR_RCV_ACK_MASK	0x0001
+#define CSR_READY_MASK		0x0002
+
+/* REG_TR */
+#define SCL_TIMEOUT(x)		(((x) & 0xFF) << 8)
+#define TR_STD			0x0064
+#define TR_HS			0x0019
+
+/* REG_MCR */
+#define MCR_APB_96M		7
+#define MCR_APB_166M		12
+
+#define I2C_MODE_STANDARD	0
+#define I2C_MODE_FAST		1
+
+#define WMT_I2C_TIMEOUT		(msecs_to_jiffies(1000))
+
+struct wmt_i2c_dev {
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	struct device		*dev;
+	void __iomem		*base;
+	struct clk		*clk;
+	int			mode;
+	int			irq;
+	u16			cmd_status;
+};
+
+static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + WMT_I2C_TIMEOUT;
+	while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
+			return -EBUSY;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
+{
+	int ret = 0;
+
+	if (i2c_dev->cmd_status & ISR_NACK_ADDR)
+		ret = -EIO;
+
+	if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
+		ret = -ETIMEDOUT;
+
+	return ret;
+}
+
+static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			 int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret;
+	unsigned long wait_result;
+	int xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (pmsg->len == 0) {
+		/*
+		 * We still need to run through the while (..) once, so
+		 * start at -1 and break out early from the loop
+		 */
+		xfer_len = -1;
+		writew(0, i2c_dev->base + REG_CDR);
+	} else {
+		writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
+	}
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val &= ~CR_TX_END;
+		writew(val, i2c_dev->base + REG_CR);
+
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	reinit_completion(&i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							msecs_to_jiffies(500));
+
+		if (wait_result == 0)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		xfer_len++;
+
+		val = readw(i2c_dev->base + REG_CSR);
+		if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
+			dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
+			return -EIO;
+		}
+
+		if (pmsg->len == 0) {
+			val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
+			writew(val, i2c_dev->base + REG_CR);
+			break;
+		}
+
+		if (xfer_len == pmsg->len) {
+			if (last != 1)
+				writew(CR_ENABLE, i2c_dev->base + REG_CR);
+		} else {
+			writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
+								REG_CDR);
+			writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret;
+	unsigned long wait_result;
+	u32 xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_END;
+	writew(val, i2c_dev->base + REG_CR);
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_NEXT_NO_ACK;
+	writew(val, i2c_dev->base + REG_CR);
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	if (pmsg->len == 1) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_TX_NEXT_NO_ACK;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	reinit_completion(&i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							msecs_to_jiffies(500));
+
+		if (!wait_result)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
+		xfer_len++;
+
+		if (xfer_len == pmsg->len - 1) {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY);
+			writew(val, i2c_dev->base + REG_CR);
+		} else {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= CR_CPU_RDY;
+			writew(val, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[],
+			int num)
+{
+	struct i2c_msg *pmsg;
+	int i, is_last;
+	int ret = 0;
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		is_last = ((i + 1) == num);
+
+		pmsg = &msgs[i];
+		if (pmsg->flags & I2C_M_RD)
+			ret = wmt_i2c_read(adap, pmsg, is_last);
+		else
+			ret = wmt_i2c_write(adap, pmsg, is_last);
+	}
+
+	return (ret < 0) ? ret : i;
+}
+
+static u32 wmt_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm wmt_i2c_algo = {
+	.master_xfer	= wmt_i2c_xfer,
+	.functionality	= wmt_i2c_func,
+};
+
+static irqreturn_t wmt_i2c_isr(int irq, void *data)
+{
+	struct wmt_i2c_dev *i2c_dev = data;
+
+	/* save the status and write-clear it */
+	i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
+	writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
+
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
+{
+	int err;
+
+	err = clk_prepare_enable(i2c_dev->clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	err = clk_set_rate(i2c_dev->clk, 20000000);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
+		clk_disable_unprepare(i2c_dev->clk);
+		return err;
+	}
+
+	writew(0, i2c_dev->base + REG_CR);
+	writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+	writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
+	writew(CR_ENABLE, i2c_dev->base + REG_CR);
+	readw(i2c_dev->base + REG_CSR);		/* read clear */
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
+	else
+		writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
+
+	return 0;
+}
+
+static int wmt_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct wmt_i2c_dev *i2c_dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int err;
+	u32 clk_rate;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = irq_of_parse_and_map(np, 0);
+	if (!i2c_dev->irq) {
+		dev_err(&pdev->dev, "irq missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = of_clk_get(np, 0);
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "unable to request clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	i2c_dev->mode = I2C_MODE_STANDARD;
+	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if ((!err) && (clk_rate == 400000))
+		i2c_dev->mode = I2C_MODE_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
+							"i2c", i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
+		return err;
+	}
+
+	adap = &i2c_dev->adapter;
+	i2c_set_adapdata(adap, i2c_dev);
+	strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &wmt_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	err = wmt_i2c_reset_hardware(i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "error initializing hardware\n");
+		return err;
+	}
+
+	err = i2c_add_adapter(adap);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	return 0;
+}
+
+static int wmt_i2c_remove(struct platform_device *pdev)
+{
+	struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	/* Disable interrupts, clock and delete adapter */
+	writew(0, i2c_dev->base + REG_IMR);
+	clk_disable_unprepare(i2c_dev->clk);
+	i2c_del_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id wmt_i2c_dt_ids[] = {
+	{ .compatible = "wm,wm8505-i2c" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver wmt_i2c_driver = {
+	.probe		= wmt_i2c_probe,
+	.remove		= wmt_i2c_remove,
+	.driver		= {
+		.name	= "wmt-i2c",
+		.of_match_table = wmt_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(wmt_i2c_driver);
+
+MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xgene-slimpro.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xgene-slimpro.c
new file mode 100644
index 0000000..7e89ba6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -0,0 +1,605 @@
+/*
+ * X-Gene SLIMpro I2C Driver
+ *
+ * Copyright (c) 2014, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ * Author: Hieu Le <hnle@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver provides support for X-Gene SLIMpro I2C device access
+ * using the APM X-Gene SLIMpro mailbox driver.
+ *
+ */
+#include <acpi/pcc.h>
+#include <linux/acpi.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/version.h>
+
+#define MAILBOX_OP_TIMEOUT		1000	/* Operation time out in ms */
+#define MAILBOX_I2C_INDEX		0
+#define SLIMPRO_IIC_BUS			1	/* Use I2C bus 1 only */
+
+#define SMBUS_CMD_LEN			1
+#define BYTE_DATA			1
+#define WORD_DATA			2
+#define BLOCK_DATA			3
+
+#define SLIMPRO_IIC_I2C_PROTOCOL	0
+#define SLIMPRO_IIC_SMB_PROTOCOL	1
+
+#define SLIMPRO_IIC_READ		0
+#define SLIMPRO_IIC_WRITE		1
+
+#define IIC_SMB_WITHOUT_DATA_LEN	0
+#define IIC_SMB_WITH_DATA_LEN		1
+
+#define SLIMPRO_DEBUG_MSG		0
+#define SLIMPRO_MSG_TYPE_SHIFT		28
+#define SLIMPRO_DBG_SUBTYPE_I2C1READ	4
+#define SLIMPRO_DBGMSG_TYPE_SHIFT	24
+#define SLIMPRO_DBGMSG_TYPE_MASK	0x0F000000U
+#define SLIMPRO_IIC_DEV_SHIFT		23
+#define SLIMPRO_IIC_DEV_MASK		0x00800000U
+#define SLIMPRO_IIC_DEVID_SHIFT		13
+#define SLIMPRO_IIC_DEVID_MASK		0x007FE000U
+#define SLIMPRO_IIC_RW_SHIFT		12
+#define SLIMPRO_IIC_RW_MASK		0x00001000U
+#define SLIMPRO_IIC_PROTO_SHIFT		11
+#define SLIMPRO_IIC_PROTO_MASK		0x00000800U
+#define SLIMPRO_IIC_ADDRLEN_SHIFT	8
+#define SLIMPRO_IIC_ADDRLEN_MASK	0x00000700U
+#define SLIMPRO_IIC_DATALEN_SHIFT	0
+#define SLIMPRO_IIC_DATALEN_MASK	0x000000FFU
+
+/*
+ * SLIMpro I2C message encode
+ *
+ * dev		- Controller number (0-based)
+ * chip		- I2C chip address
+ * op		- SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE
+ * proto	- SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL
+ * addrlen	- Length of the address field
+ * datalen	- Length of the data field
+ */
+#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \
+	((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \
+	((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \
+	SLIMPRO_DBGMSG_TYPE_MASK) | \
+	((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \
+	((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \
+	((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \
+	((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \
+	((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
+	((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
+
+#define SLIMPRO_MSG_TYPE(v)             (((v) & 0xF0000000) >> 28)
+
+/*
+ * Encode for upper address for block data
+ */
+#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR			0x80000000
+#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a)	((u32) (((a) << 30) \
+								& 0x40000000))
+#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a)		((u32) (((a) >> 12) \
+								& 0x3FF00000))
+#define SLIMPRO_IIC_ENCODE_ADDR(a)			((a) & 0x000FFFFF)
+
+#define SLIMPRO_IIC_MSG_DWORD_COUNT			3
+
+/* PCC related defines */
+#define PCC_SIGNATURE			0x50424300
+#define PCC_STS_CMD_COMPLETE		BIT(0)
+#define PCC_STS_SCI_DOORBELL		BIT(1)
+#define PCC_STS_ERR			BIT(2)
+#define PCC_STS_PLAT_NOTIFY		BIT(3)
+#define PCC_CMD_GENERATE_DB_INT		BIT(15)
+
+struct slimpro_i2c_dev {
+	struct i2c_adapter adapter;
+	struct device *dev;
+	struct mbox_chan *mbox_chan;
+	struct mbox_client mbox_client;
+	int mbox_idx;
+	struct completion rd_complete;
+	u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
+	u32 *resp_msg;
+	phys_addr_t comm_base_addr;
+	void *pcc_comm_addr;
+};
+
+#define to_slimpro_i2c_dev(cl)	\
+		container_of(cl, struct slimpro_i2c_dev, mbox_client)
+
+/*
+ * This function tests and clears a bitmask then returns its old value
+ */
+static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask)
+{
+	u16 ret, val;
+
+	val = le16_to_cpu(READ_ONCE(*addr));
+	ret = val & mask;
+	val &= ~mask;
+	WRITE_ONCE(*addr, cpu_to_le16(val));
+
+	return ret;
+}
+
+static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
+{
+	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
+
+	/*
+	 * Response message format:
+	 * mssg[0] is the return code of the operation
+	 * mssg[1] is the first data word
+	 * mssg[2] is NOT used
+	 */
+	if (ctx->resp_msg)
+		*ctx->resp_msg = ((u32 *)mssg)[1];
+
+	if (ctx->mbox_client.tx_block)
+		complete(&ctx->rd_complete);
+}
+
+static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg)
+{
+	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+
+	/* Check if platform sends interrupt */
+	if (!xgene_word_tst_and_clr(&generic_comm_base->status,
+				    PCC_STS_SCI_DOORBELL))
+		return;
+
+	if (xgene_word_tst_and_clr(&generic_comm_base->status,
+				   PCC_STS_CMD_COMPLETE)) {
+		msg = generic_comm_base + 1;
+
+		/* Response message msg[1] contains the return value. */
+		if (ctx->resp_msg)
+			*ctx->resp_msg = ((u32 *)msg)[1];
+
+		complete(&ctx->rd_complete);
+	}
+}
+
+static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg)
+{
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+	u32 *ptr = (void *)(generic_comm_base + 1);
+	u16 status;
+	int i;
+
+	WRITE_ONCE(generic_comm_base->signature,
+		   cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx));
+
+	WRITE_ONCE(generic_comm_base->command,
+		   cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT));
+
+	status = le16_to_cpu(READ_ONCE(generic_comm_base->status));
+	status &= ~PCC_STS_CMD_COMPLETE;
+	WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status));
+
+	/* Copy the message to the PCC comm space */
+	for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++)
+		WRITE_ONCE(ptr[i], cpu_to_le32(msg[i]));
+}
+
+static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
+{
+	if (ctx->mbox_client.tx_block || !acpi_disabled) {
+		if (!wait_for_completion_timeout(&ctx->rd_complete,
+						 msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
+			return -ETIMEDOUT;
+	}
+
+	/* Check of invalid data or no device */
+	if (*ctx->resp_msg == 0xffffffff)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
+				u32 *msg,
+				u32 *data)
+{
+	int rc;
+
+	ctx->resp_msg = data;
+
+	if (!acpi_disabled) {
+		reinit_completion(&ctx->rd_complete);
+		slimpro_i2c_pcc_tx_prepare(ctx, msg);
+	}
+
+	rc = mbox_send_message(ctx->mbox_chan, msg);
+	if (rc < 0)
+		goto err;
+
+	rc = start_i2c_msg_xfer(ctx);
+
+err:
+	if (!acpi_disabled)
+		mbox_chan_txdone(ctx->mbox_chan, 0);
+
+	ctx->resp_msg = NULL;
+
+	return rc;
+}
+
+static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
+			  u32 addr, u32 addrlen, u32 protocol,
+			  u32 readlen, u32 *data)
+{
+	u32 msg[3];
+
+	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
+					SLIMPRO_IIC_READ, protocol, addrlen, readlen);
+	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
+	msg[2] = 0;
+
+	return slimpro_i2c_send_msg(ctx, msg, data);
+}
+
+static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip,
+			  u32 addr, u32 addrlen, u32 protocol, u32 writelen,
+			  u32 data)
+{
+	u32 msg[3];
+
+	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
+					SLIMPRO_IIC_WRITE, protocol, addrlen, writelen);
+	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
+	msg[2] = data;
+
+	return slimpro_i2c_send_msg(ctx, msg, msg);
+}
+
+static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
+			     u32 addrlen, u32 protocol, u32 readlen,
+			     u32 with_data_len, void *data)
+{
+	dma_addr_t paddr;
+	u32 msg[3];
+	int rc;
+
+	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE);
+	if (dma_mapping_error(ctx->dev, paddr)) {
+		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
+			ctx->dma_buffer);
+		return -ENOMEM;
+	}
+
+	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ,
+					protocol, addrlen, readlen);
+	msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
+		 SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) |
+		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
+		 SLIMPRO_IIC_ENCODE_ADDR(addr);
+	msg[2] = (u32)paddr;
+
+	rc = slimpro_i2c_send_msg(ctx, msg, msg);
+
+	/* Copy to destination */
+	memcpy(data, ctx->dma_buffer, readlen);
+
+	dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE);
+	return rc;
+}
+
+static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
+			     u32 addr, u32 addrlen, u32 protocol, u32 writelen,
+			     void *data)
+{
+	dma_addr_t paddr;
+	u32 msg[3];
+	int rc;
+
+	memcpy(ctx->dma_buffer, data, writelen);
+	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
+			       DMA_TO_DEVICE);
+	if (dma_mapping_error(ctx->dev, paddr)) {
+		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
+			ctx->dma_buffer);
+		return -ENOMEM;
+	}
+
+	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE,
+					protocol, addrlen, writelen);
+	msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
+		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
+		 SLIMPRO_IIC_ENCODE_ADDR(addr);
+	msg[2] = (u32)paddr;
+
+	if (ctx->mbox_client.tx_block)
+		reinit_completion(&ctx->rd_complete);
+
+	rc = slimpro_i2c_send_msg(ctx, msg, msg);
+
+	dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE);
+	return rc;
+}
+
+static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr,
+				  unsigned short flags, char read_write,
+				  u8 command, int size,
+				  union i2c_smbus_data *data)
+{
+	struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap);
+	int ret = -EOPNOTSUPP;
+	u32 val;
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = slimpro_i2c_rd(ctx, addr, 0, 0,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     BYTE_DATA, &val);
+			data->byte = val;
+		} else {
+			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     0, 0);
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     BYTE_DATA, &val);
+			data->byte = val;
+		} else {
+			val = data->byte;
+			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     BYTE_DATA, val);
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     WORD_DATA, &val);
+			data->word = val;
+		} else {
+			val = data->word;
+			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
+					     SLIMPRO_IIC_SMB_PROTOCOL,
+					     WORD_DATA, val);
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = slimpro_i2c_blkrd(ctx, addr, command,
+						SMBUS_CMD_LEN,
+						SLIMPRO_IIC_SMB_PROTOCOL,
+						I2C_SMBUS_BLOCK_MAX + 1,
+						IIC_SMB_WITH_DATA_LEN,
+						&data->block[0]);
+
+		} else {
+			ret = slimpro_i2c_blkwr(ctx, addr, command,
+						SMBUS_CMD_LEN,
+						SLIMPRO_IIC_SMB_PROTOCOL,
+						data->block[0] + 1,
+						&data->block[0]);
+		}
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = slimpro_i2c_blkrd(ctx, addr,
+						command,
+						SMBUS_CMD_LEN,
+						SLIMPRO_IIC_I2C_PROTOCOL,
+						I2C_SMBUS_BLOCK_MAX,
+						IIC_SMB_WITHOUT_DATA_LEN,
+						&data->block[1]);
+		} else {
+			ret = slimpro_i2c_blkwr(ctx, addr, command,
+						SMBUS_CMD_LEN,
+						SLIMPRO_IIC_I2C_PROTOCOL,
+						data->block[0],
+						&data->block[1]);
+		}
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+/*
+* Return list of supported functionality.
+*/
+static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA |
+		I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm xgene_slimpro_i2c_algorithm = {
+	.smbus_xfer = xgene_slimpro_i2c_xfer,
+	.functionality = xgene_slimpro_i2c_func,
+};
+
+static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
+{
+	struct slimpro_i2c_dev *ctx;
+	struct i2c_adapter *adapter;
+	struct mbox_client *cl;
+	int rc;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = &pdev->dev;
+	platform_set_drvdata(pdev, ctx);
+	cl = &ctx->mbox_client;
+
+	/* Request mailbox channel */
+	cl->dev = &pdev->dev;
+	init_completion(&ctx->rd_complete);
+	cl->tx_tout = MAILBOX_OP_TIMEOUT;
+	cl->knows_txdone = false;
+	if (acpi_disabled) {
+		cl->tx_block = true;
+		cl->rx_callback = slimpro_i2c_rx_cb;
+		ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+	} else {
+		struct acpi_pcct_hw_reduced *cppc_ss;
+
+		if (device_property_read_u32(&pdev->dev, "pcc-channel",
+					     &ctx->mbox_idx))
+			ctx->mbox_idx = MAILBOX_I2C_INDEX;
+
+		cl->tx_block = false;
+		cl->rx_callback = slimpro_i2c_pcc_rx_cb;
+		ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "PCC mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+
+		/*
+		 * The PCC mailbox controller driver should
+		 * have parsed the PCCT (global table of all
+		 * PCC channels) and stored pointers to the
+		 * subspace communication region in con_priv.
+		 */
+		cppc_ss = ctx->mbox_chan->con_priv;
+		if (!cppc_ss) {
+			dev_err(&pdev->dev, "PPC subspace not found\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
+
+		if (!ctx->mbox_chan->mbox->txdone_irq) {
+			dev_err(&pdev->dev, "PCC IRQ not supported\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
+
+		/*
+		 * This is the shared communication region
+		 * for the OS and Platform to communicate over.
+		 */
+		ctx->comm_base_addr = cppc_ss->base_address;
+		if (ctx->comm_base_addr) {
+			ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
+						      cppc_ss->length,
+						      MEMREMAP_WB);
+		} else {
+			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
+
+		if (!ctx->pcc_comm_addr) {
+			dev_err(&pdev->dev,
+				"Failed to ioremap PCC comm region\n");
+			rc = -ENOMEM;
+			goto mbox_err;
+		}
+	}
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (rc)
+		dev_warn(&pdev->dev, "Unable to set dma mask\n");
+
+	/* Setup I2C adapter */
+	adapter = &ctx->adapter;
+	snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C");
+	adapter->algo = &xgene_slimpro_i2c_algorithm;
+	adapter->class = I2C_CLASS_HWMON;
+	adapter->dev.parent = &pdev->dev;
+	adapter->dev.of_node = pdev->dev.of_node;
+	ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev));
+	i2c_set_adapdata(adapter, ctx);
+	rc = i2c_add_adapter(adapter);
+	if (rc)
+		goto mbox_err;
+
+	dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
+	return 0;
+
+mbox_err:
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
+
+	return rc;
+}
+
+static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
+{
+	struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&ctx->adapter);
+
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
+
+	return 0;
+}
+
+static const struct of_device_id xgene_slimpro_i2c_dt_ids[] = {
+	{.compatible = "apm,xgene-slimpro-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
+	{"APMC0D40", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
+#endif
+
+static struct platform_driver xgene_slimpro_i2c_driver = {
+	.probe	= xgene_slimpro_i2c_probe,
+	.remove	= xgene_slimpro_i2c_remove,
+	.driver	= {
+		.name	= "xgene-slimpro-i2c",
+		.of_match_table = of_match_ptr(xgene_slimpro_i2c_dt_ids),
+		.acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids)
+	},
+};
+
+module_platform_driver(xgene_slimpro_i2c_driver);
+
+MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver");
+MODULE_AUTHOR("Feng Kan <fkan@apm.com>");
+MODULE_AUTHOR("Hieu Le <hnle@apm.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xiic.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xiic.c
new file mode 100644
index 0000000..5a94f73
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xiic.c
@@ -0,0 +1,905 @@
+/*
+ * i2c-xiic.c
+ * Copyright (c) 2002-2007 Xilinx Inc.
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * This code was implemented by Mocean Laboratories AB when porting linux
+ * to the automotive development board Russellville. The copyright holder
+ * as seen in the header is Intel corporation.
+ * Mocean Laboratories forked off the GNU/Linux platform work into a
+ * separate company called Pelagicore AB, which committed the code to the
+ * kernel.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-xiic.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+#define DRIVER_NAME "xiic-i2c"
+
+enum xilinx_i2c_state {
+	STATE_DONE,
+	STATE_ERROR,
+	STATE_START
+};
+
+enum xiic_endian {
+	LITTLE,
+	BIG
+};
+
+/**
+ * struct xiic_i2c - Internal representation of the XIIC I2C bus
+ * @base:	Memory base of the HW registers
+ * @wait:	Wait queue for callers
+ * @adap:	Kernel adapter representation
+ * @tx_msg:	Messages from above to be sent
+ * @lock:	Mutual exclusion
+ * @tx_pos:	Current pos in TX message
+ * @nmsgs:	Number of messages in tx_msg
+ * @state:	See STATE_
+ * @rx_msg:	Current RX message
+ * @rx_pos:	Position within current RX message
+ * @endianness: big/little-endian byte order
+ */
+struct xiic_i2c {
+	struct device		*dev;
+	void __iomem		*base;
+	wait_queue_head_t	wait;
+	struct i2c_adapter	adap;
+	struct i2c_msg		*tx_msg;
+	struct mutex		lock;
+	unsigned int		tx_pos;
+	unsigned int		nmsgs;
+	enum xilinx_i2c_state	state;
+	struct i2c_msg		*rx_msg;
+	int			rx_pos;
+	enum xiic_endian	endianness;
+	struct clk *clk;
+};
+
+
+#define XIIC_MSB_OFFSET 0
+#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
+
+/*
+ * Register offsets in bytes from RegisterBase. Three is added to the
+ * base offset to access LSB (IBM style) of the word
+ */
+#define XIIC_CR_REG_OFFSET   (0x00+XIIC_REG_OFFSET)	/* Control Register   */
+#define XIIC_SR_REG_OFFSET   (0x04+XIIC_REG_OFFSET)	/* Status Register    */
+#define XIIC_DTR_REG_OFFSET  (0x08+XIIC_REG_OFFSET)	/* Data Tx Register   */
+#define XIIC_DRR_REG_OFFSET  (0x0C+XIIC_REG_OFFSET)	/* Data Rx Register   */
+#define XIIC_ADR_REG_OFFSET  (0x10+XIIC_REG_OFFSET)	/* Address Register   */
+#define XIIC_TFO_REG_OFFSET  (0x14+XIIC_REG_OFFSET)	/* Tx FIFO Occupancy  */
+#define XIIC_RFO_REG_OFFSET  (0x18+XIIC_REG_OFFSET)	/* Rx FIFO Occupancy  */
+#define XIIC_TBA_REG_OFFSET  (0x1C+XIIC_REG_OFFSET)	/* 10 Bit Address reg */
+#define XIIC_RFD_REG_OFFSET  (0x20+XIIC_REG_OFFSET)	/* Rx FIFO Depth reg  */
+#define XIIC_GPO_REG_OFFSET  (0x24+XIIC_REG_OFFSET)	/* Output Register    */
+
+/* Control Register masks */
+#define XIIC_CR_ENABLE_DEVICE_MASK        0x01	/* Device enable = 1      */
+#define XIIC_CR_TX_FIFO_RESET_MASK        0x02	/* Transmit FIFO reset=1  */
+#define XIIC_CR_MSMS_MASK                 0x04	/* Master starts Txing=1  */
+#define XIIC_CR_DIR_IS_TX_MASK            0x08	/* Dir of tx. Txing=1     */
+#define XIIC_CR_NO_ACK_MASK               0x10	/* Tx Ack. NO ack = 1     */
+#define XIIC_CR_REPEATED_START_MASK       0x20	/* Repeated start = 1     */
+#define XIIC_CR_GENERAL_CALL_MASK         0x40	/* Gen Call enabled = 1   */
+
+/* Status Register masks */
+#define XIIC_SR_GEN_CALL_MASK             0x01	/* 1=a mstr issued a GC   */
+#define XIIC_SR_ADDR_AS_SLAVE_MASK        0x02	/* 1=when addr as slave   */
+#define XIIC_SR_BUS_BUSY_MASK             0x04	/* 1 = bus is busy        */
+#define XIIC_SR_MSTR_RDING_SLAVE_MASK     0x08	/* 1=Dir: mstr <-- slave  */
+#define XIIC_SR_TX_FIFO_FULL_MASK         0x10	/* 1 = Tx FIFO full       */
+#define XIIC_SR_RX_FIFO_FULL_MASK         0x20	/* 1 = Rx FIFO full       */
+#define XIIC_SR_RX_FIFO_EMPTY_MASK        0x40	/* 1 = Rx FIFO empty      */
+#define XIIC_SR_TX_FIFO_EMPTY_MASK        0x80	/* 1 = Tx FIFO empty      */
+
+/* Interrupt Status Register masks    Interrupt occurs when...       */
+#define XIIC_INTR_ARB_LOST_MASK           0x01	/* 1 = arbitration lost   */
+#define XIIC_INTR_TX_ERROR_MASK           0x02	/* 1=Tx error/msg complete */
+#define XIIC_INTR_TX_EMPTY_MASK           0x04	/* 1 = Tx FIFO/reg empty  */
+#define XIIC_INTR_RX_FULL_MASK            0x08	/* 1=Rx FIFO/reg=OCY level */
+#define XIIC_INTR_BNB_MASK                0x10	/* 1 = Bus not busy       */
+#define XIIC_INTR_AAS_MASK                0x20	/* 1 = when addr as slave */
+#define XIIC_INTR_NAAS_MASK               0x40	/* 1 = not addr as slave  */
+#define XIIC_INTR_TX_HALF_MASK            0x80	/* 1 = TX FIFO half empty */
+
+/* The following constants specify the depth of the FIFOs */
+#define IIC_RX_FIFO_DEPTH         16	/* Rx fifo capacity               */
+#define IIC_TX_FIFO_DEPTH         16	/* Tx fifo capacity               */
+
+/* The following constants specify groups of interrupts that are typically
+ * enabled or disables at the same time
+ */
+#define XIIC_TX_INTERRUPTS                           \
+(XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)
+
+#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
+
+/* The following constants are used with the following macros to specify the
+ * operation, a read or write operation.
+ */
+#define XIIC_READ_OPERATION  1
+#define XIIC_WRITE_OPERATION 0
+
+/*
+ * Tx Fifo upper bit masks.
+ */
+#define XIIC_TX_DYN_START_MASK            0x0100 /* 1 = Set dynamic start */
+#define XIIC_TX_DYN_STOP_MASK             0x0200 /* 1 = Set dynamic stop */
+
+/*
+ * The following constants define the register offsets for the Interrupt
+ * registers. There are some holes in the memory map for reserved addresses
+ * to allow other registers to be added and still match the memory map of the
+ * interrupt controller registers
+ */
+#define XIIC_DGIER_OFFSET    0x1C /* Device Global Interrupt Enable Register */
+#define XIIC_IISR_OFFSET     0x20 /* Interrupt Status Register */
+#define XIIC_IIER_OFFSET     0x28 /* Interrupt Enable Register */
+#define XIIC_RESETR_OFFSET   0x40 /* Reset Register */
+
+#define XIIC_RESET_MASK             0xAUL
+
+#define XIIC_PM_TIMEOUT		1000	/* ms */
+/*
+ * The following constant is used for the device global interrupt enable
+ * register, to enable all interrupts for the device, this is the only bit
+ * in the register
+ */
+#define XIIC_GINTR_ENABLE_MASK      0x80000000UL
+
+#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
+#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
+
+static void xiic_start_xfer(struct xiic_i2c *i2c);
+static void __xiic_start_xfer(struct xiic_i2c *i2c);
+
+/*
+ * For the register read and write functions, a little-endian and big-endian
+ * version are necessary. Endianness is detected during the probe function.
+ * Only the least significant byte [doublet] of the register are ever
+ * accessed. This requires an offset of 3 [2] from the base address for
+ * big-endian systems.
+ */
+
+static inline void xiic_setreg8(struct xiic_i2c *i2c, int reg, u8 value)
+{
+	if (i2c->endianness == LITTLE)
+		iowrite8(value, i2c->base + reg);
+	else
+		iowrite8(value, i2c->base + reg + 3);
+}
+
+static inline u8 xiic_getreg8(struct xiic_i2c *i2c, int reg)
+{
+	u8 ret;
+
+	if (i2c->endianness == LITTLE)
+		ret = ioread8(i2c->base + reg);
+	else
+		ret = ioread8(i2c->base + reg + 3);
+	return ret;
+}
+
+static inline void xiic_setreg16(struct xiic_i2c *i2c, int reg, u16 value)
+{
+	if (i2c->endianness == LITTLE)
+		iowrite16(value, i2c->base + reg);
+	else
+		iowrite16be(value, i2c->base + reg + 2);
+}
+
+static inline void xiic_setreg32(struct xiic_i2c *i2c, int reg, int value)
+{
+	if (i2c->endianness == LITTLE)
+		iowrite32(value, i2c->base + reg);
+	else
+		iowrite32be(value, i2c->base + reg);
+}
+
+static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
+{
+	u32 ret;
+
+	if (i2c->endianness == LITTLE)
+		ret = ioread32(i2c->base + reg);
+	else
+		ret = ioread32be(i2c->base + reg);
+	return ret;
+}
+
+static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
+{
+	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
+}
+
+static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
+{
+	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
+}
+
+static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
+{
+	u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+	xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
+}
+
+static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
+{
+	xiic_irq_clr(i2c, mask);
+	xiic_irq_en(i2c, mask);
+}
+
+static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
+{
+	u8 sr;
+	for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+		!(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
+		sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
+		xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+}
+
+static void xiic_reinit(struct xiic_i2c *i2c)
+{
+	xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+	/* Set receive Fifo depth to maximum (zero based). */
+	xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, IIC_RX_FIFO_DEPTH - 1);
+
+	/* Reset Tx Fifo. */
+	xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
+
+	/* Enable IIC Device, remove Tx Fifo reset & disable general call. */
+	xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
+
+	/* make sure RX fifo is empty */
+	xiic_clear_rx_fifo(i2c);
+
+	/* Enable interrupts */
+	xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+
+	xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK);
+}
+
+static void xiic_deinit(struct xiic_i2c *i2c)
+{
+	u8 cr;
+
+	xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+	/* Disable IIC Device. */
+	cr = xiic_getreg8(i2c, XIIC_CR_REG_OFFSET);
+	xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, cr & ~XIIC_CR_ENABLE_DEVICE_MASK);
+}
+
+static void xiic_read_rx(struct xiic_i2c *i2c)
+{
+	u8 bytes_in_fifo;
+	int i;
+
+	bytes_in_fifo = xiic_getreg8(i2c, XIIC_RFO_REG_OFFSET) + 1;
+
+	dev_dbg(i2c->adap.dev.parent,
+		"%s entry, bytes in fifo: %d, msg: %d, SR: 0x%x, CR: 0x%x\n",
+		__func__, bytes_in_fifo, xiic_rx_space(i2c),
+		xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+		xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+	if (bytes_in_fifo > xiic_rx_space(i2c))
+		bytes_in_fifo = xiic_rx_space(i2c);
+
+	for (i = 0; i < bytes_in_fifo; i++)
+		i2c->rx_msg->buf[i2c->rx_pos++] =
+			xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+
+	xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET,
+		(xiic_rx_space(i2c) > IIC_RX_FIFO_DEPTH) ?
+		IIC_RX_FIFO_DEPTH - 1 :  xiic_rx_space(i2c) - 1);
+}
+
+static int xiic_tx_fifo_space(struct xiic_i2c *i2c)
+{
+	/* return the actual space left in the FIFO */
+	return IIC_TX_FIFO_DEPTH - xiic_getreg8(i2c, XIIC_TFO_REG_OFFSET) - 1;
+}
+
+static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
+{
+	u8 fifo_space = xiic_tx_fifo_space(i2c);
+	int len = xiic_tx_space(i2c);
+
+	len = (len > fifo_space) ? fifo_space : len;
+
+	dev_dbg(i2c->adap.dev.parent, "%s entry, len: %d, fifo space: %d\n",
+		__func__, len, fifo_space);
+
+	while (len--) {
+		u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
+		if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
+			/* last message in transfer -> STOP */
+			data |= XIIC_TX_DYN_STOP_MASK;
+			dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
+		}
+		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+	}
+}
+
+static void xiic_wakeup(struct xiic_i2c *i2c, int code)
+{
+	i2c->tx_msg = NULL;
+	i2c->rx_msg = NULL;
+	i2c->nmsgs = 0;
+	i2c->state = code;
+	wake_up(&i2c->wait);
+}
+
+static irqreturn_t xiic_process(int irq, void *dev_id)
+{
+	struct xiic_i2c *i2c = dev_id;
+	u32 pend, isr, ier;
+	u32 clr = 0;
+
+	/* Get the interrupt Status from the IPIF. There is no clearing of
+	 * interrupts in the IPIF. Interrupts must be cleared at the source.
+	 * To find which interrupts are pending; AND interrupts pending with
+	 * interrupts masked.
+	 */
+	mutex_lock(&i2c->lock);
+	isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+	ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+	pend = isr & ier;
+
+	dev_dbg(i2c->adap.dev.parent, "%s: IER: 0x%x, ISR: 0x%x, pend: 0x%x\n",
+		__func__, ier, isr, pend);
+	dev_dbg(i2c->adap.dev.parent, "%s: SR: 0x%x, msg: %p, nmsgs: %d\n",
+		__func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+		i2c->tx_msg, i2c->nmsgs);
+
+
+	/* Service requesting interrupt */
+	if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
+		((pend & XIIC_INTR_TX_ERROR_MASK) &&
+		!(pend & XIIC_INTR_RX_FULL_MASK))) {
+		/* bus arbritration lost, or...
+		 * Transmit error _OR_ RX completed
+		 * if this happens when RX_FULL is not set
+		 * this is probably a TX error
+		 */
+
+		dev_dbg(i2c->adap.dev.parent, "%s error\n", __func__);
+
+		/* dynamic mode seem to suffer from problems if we just flushes
+		 * fifos and the next message is a TX with len 0 (only addr)
+		 * reset the IP instead of just flush fifos
+		 */
+		xiic_reinit(i2c);
+
+		if (i2c->rx_msg)
+			xiic_wakeup(i2c, STATE_ERROR);
+		if (i2c->tx_msg)
+			xiic_wakeup(i2c, STATE_ERROR);
+	}
+	if (pend & XIIC_INTR_RX_FULL_MASK) {
+		/* Receive register/FIFO is full */
+
+		clr |= XIIC_INTR_RX_FULL_MASK;
+		if (!i2c->rx_msg) {
+			dev_dbg(i2c->adap.dev.parent,
+				"%s unexpexted RX IRQ\n", __func__);
+			xiic_clear_rx_fifo(i2c);
+			goto out;
+		}
+
+		xiic_read_rx(i2c);
+		if (xiic_rx_space(i2c) == 0) {
+			/* this is the last part of the message */
+			i2c->rx_msg = NULL;
+
+			/* also clear TX error if there (RX complete) */
+			clr |= (isr & XIIC_INTR_TX_ERROR_MASK);
+
+			dev_dbg(i2c->adap.dev.parent,
+				"%s end of message, nmsgs: %d\n",
+				__func__, i2c->nmsgs);
+
+			/* send next message if this wasn't the last,
+			 * otherwise the transfer will be finialise when
+			 * receiving the bus not busy interrupt
+			 */
+			if (i2c->nmsgs > 1) {
+				i2c->nmsgs--;
+				i2c->tx_msg++;
+				dev_dbg(i2c->adap.dev.parent,
+					"%s will start next...\n", __func__);
+
+				__xiic_start_xfer(i2c);
+			}
+		}
+	}
+	if (pend & XIIC_INTR_BNB_MASK) {
+		/* IIC bus has transitioned to not busy */
+		clr |= XIIC_INTR_BNB_MASK;
+
+		/* The bus is not busy, disable BusNotBusy interrupt */
+		xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
+
+		if (!i2c->tx_msg)
+			goto out;
+
+		if ((i2c->nmsgs == 1) && !i2c->rx_msg &&
+			xiic_tx_space(i2c) == 0)
+			xiic_wakeup(i2c, STATE_DONE);
+		else
+			xiic_wakeup(i2c, STATE_ERROR);
+	}
+	if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
+		/* Transmit register/FIFO is empty or ½ empty */
+
+		clr |= (pend &
+			(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK));
+
+		if (!i2c->tx_msg) {
+			dev_dbg(i2c->adap.dev.parent,
+				"%s unexpexted TX IRQ\n", __func__);
+			goto out;
+		}
+
+		xiic_fill_tx_fifo(i2c);
+
+		/* current message sent and there is space in the fifo */
+		if (!xiic_tx_space(i2c) && xiic_tx_fifo_space(i2c) >= 2) {
+			dev_dbg(i2c->adap.dev.parent,
+				"%s end of message sent, nmsgs: %d\n",
+				__func__, i2c->nmsgs);
+			if (i2c->nmsgs > 1) {
+				i2c->nmsgs--;
+				i2c->tx_msg++;
+				__xiic_start_xfer(i2c);
+			} else {
+				xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+
+				dev_dbg(i2c->adap.dev.parent,
+					"%s Got TX IRQ but no more to do...\n",
+					__func__);
+			}
+		} else if (!xiic_tx_space(i2c) && (i2c->nmsgs == 1))
+			/* current frame is sent and is last,
+			 * make sure to disable tx half
+			 */
+			xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+	}
+out:
+	dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
+
+	xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
+	mutex_unlock(&i2c->lock);
+	return IRQ_HANDLED;
+}
+
+static int xiic_bus_busy(struct xiic_i2c *i2c)
+{
+	u8 sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+
+	return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0;
+}
+
+static int xiic_busy(struct xiic_i2c *i2c)
+{
+	int tries = 3;
+	int err;
+
+	if (i2c->tx_msg)
+		return -EBUSY;
+
+	/* for instance if previous transfer was terminated due to TX error
+	 * it might be that the bus is on it's way to become available
+	 * give it at most 3 ms to wake
+	 */
+	err = xiic_bus_busy(i2c);
+	while (err && tries--) {
+		msleep(1);
+		err = xiic_bus_busy(i2c);
+	}
+
+	return err;
+}
+
+static void xiic_start_recv(struct xiic_i2c *i2c)
+{
+	u8 rx_watermark;
+	struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
+	unsigned long flags;
+
+	/* Clear and enable Rx full interrupt. */
+	xiic_irq_clr_en(i2c, XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK);
+
+	/* we want to get all but last byte, because the TX_ERROR IRQ is used
+	 * to inidicate error ACK on the address, and negative ack on the last
+	 * received byte, so to not mix them receive all but last.
+	 * In the case where there is only one byte to receive
+	 * we can check if ERROR and RX full is set at the same time
+	 */
+	rx_watermark = msg->len;
+	if (rx_watermark > IIC_RX_FIFO_DEPTH)
+		rx_watermark = IIC_RX_FIFO_DEPTH;
+	xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, rx_watermark - 1);
+
+	local_irq_save(flags);
+	if (!(msg->flags & I2C_M_NOSTART))
+		/* write the address */
+		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+			(msg->addr << 1) | XIIC_READ_OPERATION |
+			XIIC_TX_DYN_START_MASK);
+
+	xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+	xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+		msg->len | ((i2c->nmsgs == 1) ? XIIC_TX_DYN_STOP_MASK : 0));
+	local_irq_restore(flags);
+
+	if (i2c->nmsgs == 1)
+		/* very last, enable bus not busy as well */
+		xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+	/* the message is tx:ed */
+	i2c->tx_pos = msg->len;
+}
+
+static void xiic_start_send(struct xiic_i2c *i2c)
+{
+	struct i2c_msg *msg = i2c->tx_msg;
+
+	xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
+
+	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d",
+		__func__, msg, msg->len);
+	dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
+		__func__, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
+		xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+	if (!(msg->flags & I2C_M_NOSTART)) {
+		/* write the address */
+		u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+			XIIC_TX_DYN_START_MASK;
+		if ((i2c->nmsgs == 1) && msg->len == 0)
+			/* no data and last message -> add STOP */
+			data |= XIIC_TX_DYN_STOP_MASK;
+
+		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+	}
+
+	xiic_fill_tx_fifo(i2c);
+
+	/* Clear any pending Tx empty, Tx Error and then enable them. */
+	xiic_irq_clr_en(i2c, XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_ERROR_MASK |
+		XIIC_INTR_BNB_MASK);
+}
+
+static irqreturn_t xiic_isr(int irq, void *dev_id)
+{
+	struct xiic_i2c *i2c = dev_id;
+	u32 pend, isr, ier;
+	irqreturn_t ret = IRQ_NONE;
+	/* Do not processes a devices interrupts if the device has no
+	 * interrupts pending
+	 */
+
+	dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
+
+	isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+	ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+	pend = isr & ier;
+	if (pend)
+		ret = IRQ_WAKE_THREAD;
+
+	return ret;
+}
+
+static void __xiic_start_xfer(struct xiic_i2c *i2c)
+{
+	int first = 1;
+	int fifo_space = xiic_tx_fifo_space(i2c);
+	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
+		__func__, i2c->tx_msg, fifo_space);
+
+	if (!i2c->tx_msg)
+		return;
+
+	i2c->rx_pos = 0;
+	i2c->tx_pos = 0;
+	i2c->state = STATE_START;
+	while ((fifo_space >= 2) && (first || (i2c->nmsgs > 1))) {
+		if (!first) {
+			i2c->nmsgs--;
+			i2c->tx_msg++;
+			i2c->tx_pos = 0;
+		} else
+			first = 0;
+
+		if (i2c->tx_msg->flags & I2C_M_RD) {
+			/* we dont date putting several reads in the FIFO */
+			xiic_start_recv(i2c);
+			return;
+		} else {
+			xiic_start_send(i2c);
+			if (xiic_tx_space(i2c) != 0) {
+				/* the message could not be completely sent */
+				break;
+			}
+		}
+
+		fifo_space = xiic_tx_fifo_space(i2c);
+	}
+
+	/* there are more messages or the current one could not be completely
+	 * put into the FIFO, also enable the half empty interrupt
+	 */
+	if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
+		xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
+
+}
+
+static void xiic_start_xfer(struct xiic_i2c *i2c)
+{
+	mutex_lock(&i2c->lock);
+	xiic_reinit(i2c);
+	__xiic_start_xfer(i2c);
+	mutex_unlock(&i2c->lock);
+}
+
+static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct xiic_i2c *i2c = i2c_get_adapdata(adap);
+	int err;
+
+	dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
+		xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
+
+	err = pm_runtime_get_sync(i2c->dev);
+	if (err < 0)
+		return err;
+
+	err = xiic_busy(i2c);
+	if (err)
+		goto out;
+
+	i2c->tx_msg = msgs;
+	i2c->nmsgs = num;
+
+	xiic_start_xfer(i2c);
+
+	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+		(i2c->state == STATE_DONE), HZ)) {
+		err = (i2c->state == STATE_DONE) ? num : -EIO;
+		goto out;
+	} else {
+		i2c->tx_msg = NULL;
+		i2c->rx_msg = NULL;
+		i2c->nmsgs = 0;
+		err = -ETIMEDOUT;
+		goto out;
+	}
+out:
+	pm_runtime_mark_last_busy(i2c->dev);
+	pm_runtime_put_autosuspend(i2c->dev);
+	return err;
+}
+
+static u32 xiic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm xiic_algorithm = {
+	.master_xfer = xiic_xfer,
+	.functionality = xiic_func,
+};
+
+static const struct i2c_adapter_quirks xiic_quirks = {
+	.max_read_len = 255,
+};
+
+static const struct i2c_adapter xiic_adapter = {
+	.owner = THIS_MODULE,
+	.name = DRIVER_NAME,
+	.class = I2C_CLASS_DEPRECATED,
+	.algo = &xiic_algorithm,
+	.quirks = &xiic_quirks,
+};
+
+
+static int xiic_i2c_probe(struct platform_device *pdev)
+{
+	struct xiic_i2c *i2c;
+	struct xiic_i2c_platform_data *pdata;
+	struct resource *res;
+	int ret, irq;
+	u8 i;
+	u32 sr;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	/* hook up driver to tree */
+	platform_set_drvdata(pdev, i2c);
+	i2c->adap = xiic_adapter;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	mutex_init(&i2c->lock);
+	init_waitqueue_head(&i2c->wait);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "input clock not found.\n");
+		return PTR_ERR(i2c->clk);
+	}
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+	i2c->dev = &pdev->dev;
+	pm_runtime_enable(i2c->dev);
+	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(i2c->dev);
+	pm_runtime_set_active(i2c->dev);
+	ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr,
+					xiic_process, IRQF_ONESHOT,
+					pdev->name, i2c);
+
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto err_clk_dis;
+	}
+
+	/*
+	 * Detect endianness
+	 * Try to reset the TX FIFO. Then check the EMPTY flag. If it is not
+	 * set, assume that the endianness was wrong and swap.
+	 */
+	i2c->endianness = LITTLE;
+	xiic_setreg32(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
+	/* Reset is cleared in xiic_reinit */
+	sr = xiic_getreg32(i2c, XIIC_SR_REG_OFFSET);
+	if (!(sr & XIIC_SR_TX_FIFO_EMPTY_MASK))
+		i2c->endianness = BIG;
+
+	xiic_reinit(i2c);
+
+	/* add i2c adapter to i2c tree */
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret) {
+		xiic_deinit(i2c);
+		goto err_clk_dis;
+	}
+
+	if (pdata) {
+		/* add in known devices to the bus */
+		for (i = 0; i < pdata->num_devices; i++)
+			i2c_new_device(&i2c->adap, pdata->devices + i);
+	}
+
+	return 0;
+
+err_clk_dis:
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int xiic_i2c_remove(struct platform_device *pdev)
+{
+	struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+	int ret;
+
+	/* remove adapter & data */
+	i2c_del_adapter(&i2c->adap);
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+	xiic_deinit(i2c);
+	clk_disable_unprepare(i2c->clk);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id xiic_of_match[] = {
+	{ .compatible = "xlnx,xps-iic-2.00.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xiic_of_match);
+#endif
+
+static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
+{
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_disable(i2c->clk);
+
+	return 0;
+}
+
+static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
+{
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(i2c->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops xiic_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
+			   cdns_i2c_runtime_resume, NULL)
+};
+static struct platform_driver xiic_i2c_driver = {
+	.probe   = xiic_i2c_probe,
+	.remove  = xiic_i2c_remove,
+	.driver  = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(xiic_of_match),
+		.pm = &xiic_dev_pm_ops,
+	},
+};
+
+module_platform_driver(xiic_i2c_driver);
+
+MODULE_AUTHOR("info@mocean-labs.com");
+MODULE_DESCRIPTION("Xilinx I2C bus driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlp9xx.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlp9xx.c
new file mode 100644
index 0000000..6b106e9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlp9xx.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (c) 2003-2015 Broadcom Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define XLP9XX_I2C_DIV			0x0
+#define XLP9XX_I2C_CTRL			0x1
+#define XLP9XX_I2C_CMD			0x2
+#define XLP9XX_I2C_STATUS		0x3
+#define XLP9XX_I2C_MTXFIFO		0x4
+#define XLP9XX_I2C_MRXFIFO		0x5
+#define XLP9XX_I2C_MFIFOCTRL		0x6
+#define XLP9XX_I2C_STXFIFO		0x7
+#define XLP9XX_I2C_SRXFIFO		0x8
+#define XLP9XX_I2C_SFIFOCTRL		0x9
+#define XLP9XX_I2C_SLAVEADDR		0xA
+#define XLP9XX_I2C_OWNADDR		0xB
+#define XLP9XX_I2C_FIFOWCNT		0xC
+#define XLP9XX_I2C_INTEN		0xD
+#define XLP9XX_I2C_INTST		0xE
+#define XLP9XX_I2C_WAITCNT		0xF
+#define XLP9XX_I2C_TIMEOUT		0X10
+#define XLP9XX_I2C_GENCALLADDR		0x11
+
+#define XLP9XX_I2C_CMD_START		BIT(7)
+#define XLP9XX_I2C_CMD_STOP		BIT(6)
+#define XLP9XX_I2C_CMD_READ		BIT(5)
+#define XLP9XX_I2C_CMD_WRITE		BIT(4)
+#define XLP9XX_I2C_CMD_ACK		BIT(3)
+
+#define XLP9XX_I2C_CTRL_MCTLEN_SHIFT	16
+#define XLP9XX_I2C_CTRL_MCTLEN_MASK	0xffff0000
+#define XLP9XX_I2C_CTRL_RST		BIT(8)
+#define XLP9XX_I2C_CTRL_EN		BIT(6)
+#define XLP9XX_I2C_CTRL_MASTER		BIT(4)
+#define XLP9XX_I2C_CTRL_FIFORD		BIT(1)
+#define XLP9XX_I2C_CTRL_ADDMODE		BIT(0)
+
+#define XLP9XX_I2C_INTEN_NACKADDR	BIT(25)
+#define XLP9XX_I2C_INTEN_SADDR		BIT(13)
+#define XLP9XX_I2C_INTEN_DATADONE	BIT(12)
+#define XLP9XX_I2C_INTEN_ARLOST		BIT(11)
+#define XLP9XX_I2C_INTEN_MFIFOFULL	BIT(4)
+#define XLP9XX_I2C_INTEN_MFIFOEMTY	BIT(3)
+#define XLP9XX_I2C_INTEN_MFIFOHI	BIT(2)
+#define XLP9XX_I2C_INTEN_BUSERR		BIT(0)
+
+#define XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT		8
+#define XLP9XX_I2C_MFIFOCTRL_LOTH_SHIFT		0
+#define XLP9XX_I2C_MFIFOCTRL_RST		BIT(16)
+
+#define XLP9XX_I2C_SLAVEADDR_RW			BIT(0)
+#define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT		1
+
+#define XLP9XX_I2C_IP_CLK_FREQ		133000000UL
+#define XLP9XX_I2C_DEFAULT_FREQ		100000
+#define XLP9XX_I2C_HIGH_FREQ		400000
+#define XLP9XX_I2C_FIFO_SIZE		0x80U
+#define XLP9XX_I2C_TIMEOUT_MS		1000
+
+#define XLP9XX_I2C_FIFO_WCNT_MASK	0xff
+#define XLP9XX_I2C_STATUS_ERRMASK	(XLP9XX_I2C_INTEN_ARLOST | \
+			XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_BUSERR)
+
+struct xlp9xx_i2c_dev {
+	struct device *dev;
+	struct i2c_adapter adapter;
+	struct completion msg_complete;
+	int irq;
+	bool msg_read;
+	u32 __iomem *base;
+	u32 msg_buf_remaining;
+	u32 msg_len;
+	u32 clk_hz;
+	u32 msg_err;
+	u8 *msg_buf;
+};
+
+static inline void xlp9xx_write_i2c_reg(struct xlp9xx_i2c_dev *priv,
+					unsigned long reg, u32 val)
+{
+	writel(val, priv->base + reg);
+}
+
+static inline u32 xlp9xx_read_i2c_reg(struct xlp9xx_i2c_dev *priv,
+				      unsigned long reg)
+{
+	return readl(priv->base + reg);
+}
+
+static void xlp9xx_i2c_mask_irq(struct xlp9xx_i2c_dev *priv, u32 mask)
+{
+	u32 inten;
+
+	inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) & ~mask;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten);
+}
+
+static void xlp9xx_i2c_unmask_irq(struct xlp9xx_i2c_dev *priv, u32 mask)
+{
+	u32 inten;
+
+	inten = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTEN) | mask;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, inten);
+}
+
+static void xlp9xx_i2c_update_rx_fifo_thres(struct xlp9xx_i2c_dev *priv)
+{
+	u32 thres;
+
+	thres = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
+			     thres << XLP9XX_I2C_MFIFOCTRL_HITH_SHIFT);
+}
+
+static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv)
+{
+	u32 len, i;
+	u8 *buf = priv->msg_buf;
+
+	len = min(priv->msg_buf_remaining, XLP9XX_I2C_FIFO_SIZE);
+	for (i = 0; i < len; i++)
+		xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MTXFIFO, buf[i]);
+	priv->msg_buf_remaining -= len;
+	priv->msg_buf += len;
+}
+
+static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
+{
+	u32 len, i;
+	u8 *buf = priv->msg_buf;
+
+	len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
+				  XLP9XX_I2C_FIFO_WCNT_MASK;
+	len = min(priv->msg_buf_remaining, len);
+	for (i = 0; i < len; i++, buf++)
+		*buf = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
+
+	priv->msg_buf_remaining -= len;
+	priv->msg_buf = buf;
+
+	if (priv->msg_buf_remaining)
+		xlp9xx_i2c_update_rx_fifo_thres(priv);
+}
+
+static irqreturn_t xlp9xx_i2c_isr(int irq, void *dev_id)
+{
+	struct xlp9xx_i2c_dev *priv = dev_id;
+	u32 status;
+
+	status = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_INTST);
+	if (status == 0)
+		return IRQ_NONE;
+
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTST, status);
+	if (status & XLP9XX_I2C_STATUS_ERRMASK) {
+		priv->msg_err = status;
+		goto xfer_done;
+	}
+
+	/* SADDR ACK for SMBUS_QUICK */
+	if ((status & XLP9XX_I2C_INTEN_SADDR) && (priv->msg_len == 0))
+		goto xfer_done;
+
+	if (!priv->msg_read) {
+		if (status & XLP9XX_I2C_INTEN_MFIFOEMTY) {
+			/* TX FIFO got empty, fill it up again */
+			if (priv->msg_buf_remaining)
+				xlp9xx_i2c_fill_tx_fifo(priv);
+			else
+				xlp9xx_i2c_mask_irq(priv,
+						    XLP9XX_I2C_INTEN_MFIFOEMTY);
+		}
+	} else {
+		if (status & (XLP9XX_I2C_INTEN_DATADONE |
+			      XLP9XX_I2C_INTEN_MFIFOHI)) {
+			/* data is in FIFO, read it */
+			if (priv->msg_buf_remaining)
+				xlp9xx_i2c_drain_rx_fifo(priv);
+		}
+	}
+
+	/* Transfer complete */
+	if (status & XLP9XX_I2C_INTEN_DATADONE)
+		goto xfer_done;
+
+	return IRQ_HANDLED;
+
+xfer_done:
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+	complete(&priv->msg_complete);
+	return IRQ_HANDLED;
+}
+
+static int xlp9xx_i2c_init(struct xlp9xx_i2c_dev *priv)
+{
+	u32 prescale;
+
+	/*
+	 * The controller uses 5 * SCL clock internally.
+	 * So prescale value should be divided by 5.
+	 */
+	prescale = DIV_ROUND_UP(XLP9XX_I2C_IP_CLK_FREQ, priv->clk_hz);
+	prescale = ((prescale - 8) / 5) - 1;
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_RST);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_EN |
+			     XLP9XX_I2C_CTRL_MASTER);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_DIV, prescale);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+
+	return 0;
+}
+
+static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
+			       int last_msg)
+{
+	unsigned long timeleft;
+	u32 intr_mask, cmd, val;
+
+	priv->msg_buf = msg->buf;
+	priv->msg_buf_remaining = priv->msg_len = msg->len;
+	priv->msg_err = 0;
+	priv->msg_read = (msg->flags & I2C_M_RD);
+	reinit_completion(&priv->msg_complete);
+
+	/* Reset FIFO */
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
+			     XLP9XX_I2C_MFIFOCTRL_RST);
+
+	/* set FIFO threshold if reading */
+	if (priv->msg_read)
+		xlp9xx_i2c_update_rx_fifo_thres(priv);
+
+	/* set slave addr */
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_SLAVEADDR,
+			     (msg->addr << XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT) |
+			     (priv->msg_read ? XLP9XX_I2C_SLAVEADDR_RW : 0));
+
+	/* Build control word for transfer */
+	val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
+	if (!priv->msg_read)
+		val &= ~XLP9XX_I2C_CTRL_FIFORD;
+	else
+		val |= XLP9XX_I2C_CTRL_FIFORD;	/* read */
+
+	if (msg->flags & I2C_M_TEN)
+		val |= XLP9XX_I2C_CTRL_ADDMODE;	/* 10-bit address mode*/
+	else
+		val &= ~XLP9XX_I2C_CTRL_ADDMODE;
+
+	/* set data length to be transferred */
+	val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
+	      (msg->len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
+
+	/* fill fifo during tx */
+	if (!priv->msg_read)
+		xlp9xx_i2c_fill_tx_fifo(priv);
+
+	/* set interrupt mask */
+	intr_mask = (XLP9XX_I2C_INTEN_ARLOST | XLP9XX_I2C_INTEN_BUSERR |
+		     XLP9XX_I2C_INTEN_NACKADDR | XLP9XX_I2C_INTEN_DATADONE);
+
+	if (priv->msg_read) {
+		intr_mask |= XLP9XX_I2C_INTEN_MFIFOHI;
+		if (msg->len == 0)
+			intr_mask |= XLP9XX_I2C_INTEN_SADDR;
+	} else {
+		if (msg->len == 0)
+			intr_mask |= XLP9XX_I2C_INTEN_SADDR;
+		else
+			intr_mask |= XLP9XX_I2C_INTEN_MFIFOEMTY;
+	}
+	xlp9xx_i2c_unmask_irq(priv, intr_mask);
+
+	/* set cmd reg */
+	cmd = XLP9XX_I2C_CMD_START;
+	cmd |= (priv->msg_read ? XLP9XX_I2C_CMD_READ : XLP9XX_I2C_CMD_WRITE);
+	if (last_msg)
+		cmd |= XLP9XX_I2C_CMD_STOP;
+
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CMD, cmd);
+
+	timeleft = msecs_to_jiffies(XLP9XX_I2C_TIMEOUT_MS);
+	timeleft = wait_for_completion_timeout(&priv->msg_complete, timeleft);
+
+	if (priv->msg_err) {
+		dev_dbg(priv->dev, "transfer error %x!\n", priv->msg_err);
+		if (priv->msg_err & XLP9XX_I2C_INTEN_BUSERR)
+			xlp9xx_i2c_init(priv);
+		return -EIO;
+	}
+
+	if (timeleft == 0) {
+		dev_dbg(priv->dev, "i2c transfer timed out!\n");
+		xlp9xx_i2c_init(priv);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int xlp9xx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num)
+{
+	int i, ret;
+	struct xlp9xx_i2c_dev *priv = i2c_get_adapdata(adap);
+
+	for (i = 0; i < num; i++) {
+		ret = xlp9xx_i2c_xfer_msg(priv, &msgs[i], i == num - 1);
+		if (ret != 0)
+			return ret;
+	}
+
+	return num;
+}
+
+static u32 xlp9xx_i2c_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C |
+		I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm xlp9xx_i2c_algo = {
+	.master_xfer = xlp9xx_i2c_xfer,
+	.functionality = xlp9xx_i2c_functionality,
+};
+
+static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
+				    struct xlp9xx_i2c_dev *priv)
+{
+	u32 freq;
+	int err;
+
+	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
+	if (err) {
+		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
+	} else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+		dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
+			 freq);
+		freq = XLP9XX_I2C_DEFAULT_FREQ;
+	}
+	priv->clk_hz = freq;
+
+	return 0;
+}
+
+static int xlp9xx_i2c_probe(struct platform_device *pdev)
+{
+	struct xlp9xx_i2c_dev *priv;
+	struct resource *res;
+	int err = 0;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq <= 0) {
+		dev_err(&pdev->dev, "invalid irq!\n");
+		return priv->irq;
+	}
+
+	xlp9xx_i2c_get_frequency(pdev, priv);
+	xlp9xx_i2c_init(priv);
+
+	err = devm_request_irq(&pdev->dev, priv->irq, xlp9xx_i2c_isr, 0,
+			       pdev->name, priv);
+	if (err) {
+		dev_err(&pdev->dev, "IRQ request failed!\n");
+		return err;
+	}
+
+	init_completion(&priv->msg_complete);
+	priv->adapter.dev.parent = &pdev->dev;
+	priv->adapter.algo = &xlp9xx_i2c_algo;
+	priv->adapter.class = I2C_CLASS_HWMON;
+	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
+	priv->adapter.dev.of_node = pdev->dev.of_node;
+	priv->dev = &pdev->dev;
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name), "xlp9xx-i2c");
+	i2c_set_adapdata(&priv->adapter, priv);
+
+	err = i2c_add_adapter(&priv->adapter);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, priv);
+	dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
+
+	return 0;
+}
+
+static int xlp9xx_i2c_remove(struct platform_device *pdev)
+{
+	struct xlp9xx_i2c_dev *priv;
+
+	priv = platform_get_drvdata(pdev);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_INTEN, 0);
+	synchronize_irq(priv->irq);
+	i2c_del_adapter(&priv->adapter);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, 0);
+
+	return 0;
+}
+
+static const struct of_device_id xlp9xx_i2c_of_match[] = {
+	{ .compatible = "netlogic,xlp980-i2c", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xlp9xx_i2c_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
+	{"BRCM9007", 0},
+	{"CAV9007",  0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, xlp9xx_i2c_acpi_ids);
+#endif
+
+static struct platform_driver xlp9xx_i2c_driver = {
+	.probe = xlp9xx_i2c_probe,
+	.remove = xlp9xx_i2c_remove,
+	.driver = {
+		.name = "xlp9xx-i2c",
+		.of_match_table = xlp9xx_i2c_of_match,
+		.acpi_match_table = ACPI_PTR(xlp9xx_i2c_acpi_ids),
+	},
+};
+
+module_platform_driver(xlp9xx_i2c_driver);
+
+MODULE_AUTHOR("Subhendu Sekhar Behera <sbehera@broadcom.com>");
+MODULE_DESCRIPTION("XLP9XX/5XX I2C Bus Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlr.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlr.c
new file mode 100644
index 0000000..484bfa1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-xlr.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright 2011, Netlogic Microsystems Inc.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+
+/* XLR I2C REGISTERS */
+#define XLR_I2C_CFG		0x00
+#define XLR_I2C_CLKDIV		0x01
+#define XLR_I2C_DEVADDR		0x02
+#define XLR_I2C_ADDR		0x03
+#define XLR_I2C_DATAOUT		0x04
+#define XLR_I2C_DATAIN		0x05
+#define XLR_I2C_STATUS		0x06
+#define XLR_I2C_STARTXFR	0x07
+#define XLR_I2C_BYTECNT		0x08
+#define XLR_I2C_HDSTATIM	0x09
+
+/* Sigma Designs additional registers */
+#define XLR_I2C_INT_EN		0x09
+#define XLR_I2C_INT_STAT	0x0a
+
+/* XLR I2C REGISTERS FLAGS */
+#define XLR_I2C_BUS_BUSY	0x01
+#define XLR_I2C_SDOEMPTY	0x02
+#define XLR_I2C_RXRDY		0x04
+#define XLR_I2C_ACK_ERR		0x08
+#define XLR_I2C_ARB_STARTERR	0x30
+
+/* Register Values */
+#define XLR_I2C_CFG_ADDR	0xF8
+#define XLR_I2C_CFG_NOADDR	0xFA
+#define XLR_I2C_STARTXFR_ND	0x02    /* No Data */
+#define XLR_I2C_STARTXFR_RD	0x01    /* Read */
+#define XLR_I2C_STARTXFR_WR	0x00    /* Write */
+
+#define XLR_I2C_TIMEOUT		10	/* timeout per byte in msec */
+
+/*
+ * On XLR/XLS, we need to use __raw_ IO to read the I2C registers
+ * because they are in the big-endian MMIO area on the SoC.
+ *
+ * The readl/writel implementation on XLR/XLS byteswaps, because
+ * those are for its little-endian PCI space (see arch/mips/Kconfig).
+ */
+static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg)
+{
+	return __raw_readl(base + reg);
+}
+
+#define XLR_I2C_FLAG_IRQ	1
+
+struct xlr_i2c_config {
+	u32 flags;		/* optional feature support */
+	u32 status_busy;	/* value of STATUS[0] when busy */
+	u32 cfg_extra;		/* extra CFG bits to set */
+};
+
+struct xlr_i2c_private {
+	struct i2c_adapter adap;
+	u32 __iomem *iobase;
+	int irq;
+	int pos;
+	struct i2c_msg *msg;
+	const struct xlr_i2c_config *cfg;
+	wait_queue_head_t wait;
+	struct clk *clk;
+};
+
+static int xlr_i2c_busy(struct xlr_i2c_private *priv, u32 status)
+{
+	return (status & XLR_I2C_BUS_BUSY) == priv->cfg->status_busy;
+}
+
+static int xlr_i2c_idle(struct xlr_i2c_private *priv)
+{
+	return !xlr_i2c_busy(priv, xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS));
+}
+
+static int xlr_i2c_wait(struct xlr_i2c_private *priv, unsigned long timeout)
+{
+	int status;
+	int t;
+
+	t = wait_event_timeout(priv->wait, xlr_i2c_idle(priv),
+				msecs_to_jiffies(timeout));
+	if (!t)
+		return -ETIMEDOUT;
+
+	status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
+
+	return status & XLR_I2C_ACK_ERR ? -EIO : 0;
+}
+
+static void xlr_i2c_tx_irq(struct xlr_i2c_private *priv, u32 status)
+{
+	struct i2c_msg *msg = priv->msg;
+
+	if (status & XLR_I2C_SDOEMPTY)
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT,
+				msg->buf[priv->pos++]);
+}
+
+static void xlr_i2c_rx_irq(struct xlr_i2c_private *priv, u32 status)
+{
+	struct i2c_msg *msg = priv->msg;
+
+	if (status & XLR_I2C_RXRDY)
+		msg->buf[priv->pos++] =
+			xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
+}
+
+static irqreturn_t xlr_i2c_irq(int irq, void *dev_id)
+{
+	struct xlr_i2c_private *priv = dev_id;
+	struct i2c_msg *msg = priv->msg;
+	u32 int_stat, status;
+
+	int_stat = xlr_i2c_rdreg(priv->iobase, XLR_I2C_INT_STAT);
+	if (!int_stat)
+		return IRQ_NONE;
+
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, int_stat);
+
+	if (!msg)
+		return IRQ_HANDLED;
+
+	status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
+
+	if (priv->pos < msg->len) {
+		if (msg->flags & I2C_M_RD)
+			xlr_i2c_rx_irq(priv, status);
+		else
+			xlr_i2c_tx_irq(priv, status);
+	}
+
+	if (!xlr_i2c_busy(priv, status))
+		wake_up(&priv->wait);
+
+	return IRQ_HANDLED;
+}
+
+static int xlr_i2c_tx(struct xlr_i2c_private *priv,  u16 len,
+	u8 *buf, u16 addr)
+{
+	struct i2c_adapter *adap = &priv->adap;
+	unsigned long timeout, stoptime, checktime;
+	u32 i2c_status;
+	int pos, timedout;
+	u8 offset;
+	u32 xfer;
+
+	if (!len)
+		return -EOPNOTSUPP;
+
+	offset = buf[0];
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG,
+			XLR_I2C_CFG_ADDR | priv->cfg->cfg_extra);
+
+	timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
+	stoptime = jiffies + timeout;
+	timedout = 0;
+
+	if (len == 1) {
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
+		xfer = XLR_I2C_STARTXFR_ND;
+		pos = 1;
+	} else {
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 2);
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[1]);
+		xfer = XLR_I2C_STARTXFR_WR;
+		pos = 2;
+	}
+
+	priv->pos = pos;
+
+retry:
+	/* retry can only happen on the first byte */
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, xfer);
+
+	if (priv->irq > 0)
+		return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len);
+
+	while (!timedout) {
+		checktime = jiffies;
+		i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
+
+		if ((i2c_status & XLR_I2C_SDOEMPTY) && pos < len) {
+			xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos++]);
+
+			/* reset timeout on successful xmit */
+			stoptime = jiffies + timeout;
+		}
+		timedout = time_after(checktime, stoptime);
+
+		if (i2c_status & XLR_I2C_ARB_STARTERR) {
+			if (timedout)
+				break;
+			goto retry;
+		}
+
+		if (i2c_status & XLR_I2C_ACK_ERR)
+			return -EIO;
+
+		if (!xlr_i2c_busy(priv, i2c_status) && pos >= len)
+			return 0;
+	}
+	dev_err(&adap->dev, "I2C transmit timeout\n");
+	return -ETIMEDOUT;
+}
+
+static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr)
+{
+	struct i2c_adapter *adap = &priv->adap;
+	u32 i2c_status;
+	unsigned long timeout, stoptime, checktime;
+	int nbytes, timedout;
+
+	if (!len)
+		return -EOPNOTSUPP;
+
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG,
+			XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra);
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
+
+	priv->pos = 0;
+
+	timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
+	stoptime = jiffies + timeout;
+	timedout = 0;
+	nbytes = 0;
+retry:
+	xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD);
+
+	if (priv->irq > 0)
+		return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len);
+
+	while (!timedout) {
+		checktime = jiffies;
+		i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
+		if (i2c_status & XLR_I2C_RXRDY) {
+			if (nbytes >= len)
+				return -EIO;	/* should not happen */
+
+			buf[nbytes++] =
+				xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
+
+			/* reset timeout on successful read */
+			stoptime = jiffies + timeout;
+		}
+
+		timedout = time_after(checktime, stoptime);
+		if (i2c_status & XLR_I2C_ARB_STARTERR) {
+			if (timedout)
+				break;
+			goto retry;
+		}
+
+		if (i2c_status & XLR_I2C_ACK_ERR)
+			return -EIO;
+
+		if (!xlr_i2c_busy(priv, i2c_status))
+			return 0;
+	}
+
+	dev_err(&adap->dev, "I2C receive timeout\n");
+	return -ETIMEDOUT;
+}
+
+static int xlr_i2c_xfer(struct i2c_adapter *adap,
+	struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *msg;
+	int i;
+	int ret = 0;
+	struct xlr_i2c_private *priv = i2c_get_adapdata(adap);
+
+	ret = clk_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	if (priv->irq)
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0xf);
+
+
+	for (i = 0; ret == 0 && i < num; i++) {
+		msg = &msgs[i];
+		priv->msg = msg;
+		if (msg->flags & I2C_M_RD)
+			ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0],
+					msg->addr);
+		else
+			ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0],
+					msg->addr);
+	}
+
+	if (priv->irq)
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0);
+
+	clk_disable(priv->clk);
+	priv->msg = NULL;
+
+	return (ret != 0) ? ret : num;
+}
+
+static u32 xlr_func(struct i2c_adapter *adap)
+{
+	/* Emulate SMBUS over I2C */
+	return (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm xlr_i2c_algo = {
+	.master_xfer	= xlr_i2c_xfer,
+	.functionality	= xlr_func,
+};
+
+static const struct xlr_i2c_config xlr_i2c_config_default = {
+	.status_busy	= XLR_I2C_BUS_BUSY,
+	.cfg_extra	= 0,
+};
+
+static const struct xlr_i2c_config xlr_i2c_config_tangox = {
+	.flags		= XLR_I2C_FLAG_IRQ,
+	.status_busy	= 0,
+	.cfg_extra	= 1 << 8,
+};
+
+static const struct of_device_id xlr_i2c_dt_ids[] = {
+	{
+		.compatible	= "sigma,smp8642-i2c",
+		.data		= &xlr_i2c_config_tangox,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, xlr_i2c_dt_ids);
+
+static int xlr_i2c_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct xlr_i2c_private  *priv;
+	struct resource *res;
+	struct clk *clk;
+	unsigned long clk_rate;
+	unsigned long clk_div;
+	u32 busfreq;
+	int irq;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	match = of_match_device(xlr_i2c_dt_ids, &pdev->dev);
+	if (match)
+		priv->cfg = match->data;
+	else
+		priv->cfg = &xlr_i2c_config_default;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->iobase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->iobase))
+		return PTR_ERR(priv->iobase);
+
+	irq = platform_get_irq(pdev, 0);
+
+	if (irq > 0 && (priv->cfg->flags & XLR_I2C_FLAG_IRQ)) {
+		priv->irq = irq;
+
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0);
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, 0xf);
+
+		ret = devm_request_irq(&pdev->dev, priv->irq, xlr_i2c_irq,
+					IRQF_SHARED, dev_name(&pdev->dev),
+					priv);
+		if (ret)
+			return ret;
+
+		init_waitqueue_head(&priv->wait);
+	}
+
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &busfreq))
+		busfreq = 100000;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			return ret;
+
+		clk_rate = clk_get_rate(clk);
+		clk_div = DIV_ROUND_UP(clk_rate, 2 * busfreq);
+		xlr_i2c_wreg(priv->iobase, XLR_I2C_CLKDIV, clk_div);
+
+		clk_disable(clk);
+		priv->clk = clk;
+	}
+
+	priv->adap.dev.parent = &pdev->dev;
+	priv->adap.dev.of_node	= pdev->dev.of_node;
+	priv->adap.owner	= THIS_MODULE;
+	priv->adap.algo_data	= priv;
+	priv->adap.algo		= &xlr_i2c_algo;
+	priv->adap.nr		= pdev->id;
+	priv->adap.class	= I2C_CLASS_HWMON;
+	snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c");
+
+	i2c_set_adapdata(&priv->adap, priv);
+	ret = i2c_add_numbered_adapter(&priv->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+	dev_info(&priv->adap.dev, "Added I2C Bus.\n");
+	return 0;
+}
+
+static int xlr_i2c_remove(struct platform_device *pdev)
+{
+	struct xlr_i2c_private *priv;
+
+	priv = platform_get_drvdata(pdev);
+	i2c_del_adapter(&priv->adap);
+	clk_unprepare(priv->clk);
+
+	return 0;
+}
+
+static struct platform_driver xlr_i2c_driver = {
+	.probe  = xlr_i2c_probe,
+	.remove = xlr_i2c_remove,
+	.driver = {
+		.name   = "xlr-i2cbus",
+		.of_match_table	= xlr_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(xlr_i2c_driver);
+
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>");
+MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:xlr-i2cbus");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-zx2967.c b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-zx2967.c
new file mode 100644
index 0000000..48281c1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/i2c-zx2967.c
@@ -0,0 +1,609 @@
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define REG_CMD				0x04
+#define REG_DEVADDR_H			0x0C
+#define REG_DEVADDR_L			0x10
+#define REG_CLK_DIV_FS			0x14
+#define REG_CLK_DIV_HS			0x18
+#define REG_WRCONF			0x1C
+#define REG_RDCONF			0x20
+#define REG_DATA			0x24
+#define REG_STAT			0x28
+
+#define I2C_STOP			0
+#define I2C_MASTER			BIT(0)
+#define I2C_ADDR_MODE_TEN		BIT(1)
+#define I2C_IRQ_MSK_ENABLE		BIT(3)
+#define I2C_RW_READ			BIT(4)
+#define I2C_CMB_RW_EN			BIT(5)
+#define I2C_START			BIT(6)
+
+#define I2C_ADDR_LOW_MASK		GENMASK(6, 0)
+#define I2C_ADDR_LOW_SHIFT		0
+#define I2C_ADDR_HI_MASK		GENMASK(2, 0)
+#define I2C_ADDR_HI_SHIFT		7
+
+#define I2C_WFIFO_RESET			BIT(7)
+#define I2C_RFIFO_RESET			BIT(7)
+
+#define I2C_IRQ_ACK_CLEAR		BIT(7)
+#define I2C_INT_MASK			GENMASK(6, 0)
+
+#define I2C_TRANS_DONE			BIT(0)
+#define I2C_SR_EDEVICE			BIT(1)
+#define I2C_SR_EDATA			BIT(2)
+
+#define I2C_FIFO_MAX			16
+
+#define I2C_TIMEOUT			msecs_to_jiffies(1000)
+
+#define DEV(i2c)			((i2c)->adap.dev.parent)
+
+struct zx2967_i2c {
+	struct i2c_adapter	adap;
+	struct clk		*clk;
+	struct completion	complete;
+	u32			clk_freq;
+	void __iomem		*reg_base;
+	size_t			residue;
+	int			irq;
+	int			msg_rd;
+	u8			*cur_trans;
+	u8			access_cnt;
+	bool			is_suspended;
+	int			error;
+};
+
+static void zx2967_i2c_writel(struct zx2967_i2c *i2c,
+			      u32 val, unsigned long reg)
+{
+	writel_relaxed(val, i2c->reg_base + reg);
+}
+
+static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg)
+{
+	return readl_relaxed(i2c->reg_base + reg);
+}
+
+static void zx2967_i2c_writesb(struct zx2967_i2c *i2c,
+			       void *data, unsigned long reg, int len)
+{
+	writesb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_readsb(struct zx2967_i2c *i2c,
+			      void *data, unsigned long reg, int len)
+{
+	readsb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c)
+{
+	u32 status;
+	u32 ctl;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT);
+	status |= I2C_IRQ_ACK_CLEAR;
+	zx2967_i2c_writel(i2c, status, REG_STAT);
+
+	ctl = zx2967_i2c_readl(i2c, REG_CMD);
+	if (i2c->msg_rd)
+		ctl |= I2C_RW_READ;
+	else
+		ctl &= ~I2C_RW_READ;
+	ctl &= ~I2C_CMB_RW_EN;
+	ctl |= I2C_START;
+	zx2967_i2c_writel(i2c, ctl, REG_CMD);
+}
+
+static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c)
+{
+	u32 offset;
+	u32 val;
+
+	if (i2c->msg_rd) {
+		offset = REG_RDCONF;
+		val = I2C_RFIFO_RESET;
+	} else {
+		offset = REG_WRCONF;
+		val = I2C_WFIFO_RESET;
+	}
+
+	val |= zx2967_i2c_readl(i2c, offset);
+	zx2967_i2c_writel(i2c, val, offset);
+}
+
+static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size)
+{
+	u8 val[I2C_FIFO_MAX] = {0};
+	int i;
+
+	if (size > I2C_FIFO_MAX) {
+		dev_err(DEV(i2c), "fifo size %d over the max value %d\n",
+			size, I2C_FIFO_MAX);
+		return -EINVAL;
+	}
+
+	zx2967_i2c_readsb(i2c, val, REG_DATA, size);
+	for (i = 0; i < size; i++) {
+		*i2c->cur_trans++ = val[i];
+		i2c->residue--;
+	}
+
+	barrier();
+
+	return 0;
+}
+
+static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c)
+{
+	size_t residue = i2c->residue;
+	u8 *buf = i2c->cur_trans;
+
+	if (residue == 0) {
+		dev_err(DEV(i2c), "residue is %d\n", (int)residue);
+		return -EINVAL;
+	}
+
+	if (residue <= I2C_FIFO_MAX) {
+		zx2967_i2c_writesb(i2c, buf, REG_DATA, residue);
+
+		/* Again update before writing to FIFO to make sure isr sees. */
+		i2c->residue = 0;
+		i2c->cur_trans = NULL;
+	} else {
+		zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX);
+		i2c->residue -= I2C_FIFO_MAX;
+		i2c->cur_trans += I2C_FIFO_MAX;
+	}
+
+	barrier();
+
+	return 0;
+}
+
+static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c)
+{
+	u32 val;
+	u32 clk_div;
+
+	val = I2C_MASTER | I2C_IRQ_MSK_ENABLE;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1;
+	zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS);
+	zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS);
+
+	zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF);
+	zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF);
+	zx2967_i2c_writel(i2c, 1, REG_RDCONF);
+
+	zx2967_i2c_flush_fifos(i2c);
+
+	return 0;
+}
+
+static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c)
+{
+	u32 status;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT);
+	status |= I2C_IRQ_ACK_CLEAR;
+	zx2967_i2c_writel(i2c, status, REG_STAT);
+}
+
+static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id)
+{
+	u32 status;
+	struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK;
+	zx2967_i2c_isr_clr(i2c);
+
+	if (status & I2C_SR_EDEVICE)
+		i2c->error = -ENXIO;
+	else if (status & I2C_SR_EDATA)
+		i2c->error = -EIO;
+	else if (status & I2C_TRANS_DONE)
+		i2c->error = 0;
+	else
+		goto done;
+
+	complete(&i2c->complete);
+done:
+	return IRQ_HANDLED;
+}
+
+static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr)
+{
+	u16 val;
+
+	val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK;
+	zx2967_i2c_writel(i2c, val, REG_DEVADDR_L);
+
+	val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK;
+	zx2967_i2c_writel(i2c, val, REG_DEVADDR_H);
+	if (val)
+		val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN;
+	else
+		val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+}
+
+static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes)
+{
+	unsigned long time_left;
+	int rd = i2c->msg_rd;
+	int ret;
+
+	reinit_completion(&i2c->complete);
+
+	if (rd) {
+		zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF);
+	} else {
+		ret = zx2967_i2c_fill_tx_fifo(i2c);
+		if (ret)
+			return ret;
+	}
+
+	zx2967_i2c_start_ctrl(i2c);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0;
+}
+
+static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c,
+			       struct i2c_msg *msg)
+{
+	int ret;
+	int i;
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	zx2967_i2c_flush_fifos(i2c);
+
+	i2c->cur_trans = msg->buf;
+	i2c->residue = msg->len;
+	i2c->access_cnt = msg->len / I2C_FIFO_MAX;
+	i2c->msg_rd = msg->flags & I2C_M_RD;
+
+	for (i = 0; i < i2c->access_cnt; i++) {
+		ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX);
+		if (ret)
+			return ret;
+	}
+
+	if (i2c->residue > 0) {
+		ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue);
+		if (ret)
+			return ret;
+	}
+
+	i2c->residue = 0;
+	i2c->access_cnt = 0;
+
+	return 0;
+}
+
+static int zx2967_i2c_xfer(struct i2c_adapter *adap,
+			   struct i2c_msg *msgs, int num)
+{
+	struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+	int ret;
+	int i;
+
+	if (i2c->is_suspended)
+		return -EBUSY;
+
+	zx2967_set_addr(i2c, msgs->addr);
+
+	for (i = 0; i < num; i++) {
+		ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]);
+		if (ret)
+			return ret;
+	}
+
+	return num;
+}
+
+static void
+zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr,
+			  char read_write, u8 command, int size,
+			  union i2c_smbus_data *data)
+{
+	u32 val;
+
+	val = zx2967_i2c_readl(i2c, REG_RDCONF);
+	val |= I2C_RFIFO_RESET;
+	zx2967_i2c_writel(i2c, val, REG_RDCONF);
+	zx2967_set_addr(i2c, addr);
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val &= ~I2C_RW_READ;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		if (read_write == I2C_SMBUS_WRITE)
+			zx2967_i2c_writel(i2c, data->byte, REG_DATA);
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		if (read_write == I2C_SMBUS_WRITE) {
+			zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA);
+			zx2967_i2c_writel(i2c, (data->word & 0xff),
+					  REG_DATA);
+		}
+		break;
+	}
+}
+
+static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size,
+				  union i2c_smbus_data *data)
+{
+	unsigned long time_left;
+	u8 buf[2];
+	u32 val;
+
+	reinit_completion(&i2c->complete);
+
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_CMB_RW_EN;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_START;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		val = zx2967_i2c_readl(i2c, REG_DATA);
+		data->byte = val;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		buf[0] = zx2967_i2c_readl(i2c, REG_DATA);
+		buf[1] = zx2967_i2c_readl(i2c, REG_DATA);
+		data->word = (buf[0] << 8) | buf[1];
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c)
+{
+	unsigned long time_left;
+	u32 val;
+
+	reinit_completion(&i2c->complete);
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_START;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	return 0;
+}
+
+static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			     unsigned short flags, char read_write,
+			     u8 command, int size, union i2c_smbus_data *data)
+{
+	struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (size == I2C_SMBUS_QUICK)
+		read_write = I2C_SMBUS_WRITE;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+	case I2C_SMBUS_WORD_DATA:
+		zx2967_smbus_xfer_prepare(i2c, addr, read_write,
+					  command, size, data);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		return zx2967_smbus_xfer_read(i2c, size, data);
+
+	return zx2967_smbus_xfer_write(i2c);
+}
+
+static u32 zx2967_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C |
+	       I2C_FUNC_SMBUS_QUICK |
+	       I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA |
+	       I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static int __maybe_unused zx2967_i2c_suspend(struct device *dev)
+{
+	struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->is_suspended = true;
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static int __maybe_unused zx2967_i2c_resume(struct device *dev)
+{
+	struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->is_suspended = false;
+	clk_prepare_enable(i2c->clk);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops,
+			 zx2967_i2c_suspend, zx2967_i2c_resume);
+
+static const struct i2c_algorithm zx2967_i2c_algo = {
+	.master_xfer = zx2967_i2c_xfer,
+	.smbus_xfer = zx2967_smbus_xfer,
+	.functionality = zx2967_i2c_func,
+};
+
+static const struct of_device_id zx2967_i2c_of_match[] = {
+	{ .compatible = "zte,zx296718-i2c", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match);
+
+static int zx2967_i2c_probe(struct platform_device *pdev)
+{
+	struct zx2967_i2c *i2c;
+	void __iomem *reg_base;
+	struct resource *res;
+	struct clk *clk;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "missing controller clock");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable i2c_clk\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+				       &i2c->clk_freq);
+	if (ret) {
+		dev_err(&pdev->dev, "missing clock-frequency");
+		return ret;
+	}
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	i2c->irq = ret;
+	i2c->reg_base = reg_base;
+	i2c->clk = clk;
+
+	init_completion(&i2c->complete);
+	platform_set_drvdata(pdev, i2c);
+
+	ret = zx2967_i2c_reset_hardware(i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize i2c controller\n");
+		goto err_clk_unprepare;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq,
+			zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq);
+		goto err_clk_unprepare;
+	}
+
+	i2c_set_adapdata(&i2c->adap, i2c);
+	strlcpy(i2c->adap.name, "zx2967 i2c adapter",
+		sizeof(i2c->adap.name));
+	i2c->adap.algo = &zx2967_i2c_algo;
+	i2c->adap.nr = pdev->id;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret)
+		goto err_clk_unprepare;
+
+	return 0;
+
+err_clk_unprepare:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int zx2967_i2c_remove(struct platform_device *pdev)
+{
+	struct zx2967_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static struct platform_driver zx2967_i2c_driver = {
+	.probe	= zx2967_i2c_probe,
+	.remove	= zx2967_i2c_remove,
+	.driver	= {
+		.name  = "zx2967_i2c",
+		.of_match_table = zx2967_i2c_of_match,
+		.pm = &zx2967_i2c_dev_pm_ops,
+	},
+};
+module_platform_driver(zx2967_i2c_driver);
+
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/busses/scx200_acb.c b/src/kernel/linux/v4.14/drivers/i2c/busses/scx200_acb.c
new file mode 100644
index 0000000..e0923be
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/busses/scx200_acb.c
@@ -0,0 +1,608 @@
+/*
+    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+    National Semiconductor SCx200 ACCESS.bus support
+    Also supports the AMD CS5535 and AMD CS5536
+
+    Based on i2c-keywest.c which is:
+        Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+        Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License as
+    published by the Free Software Foundation; either version 2 of the
+    License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    General Public License for more details.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <linux/scx200.h>
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver");
+MODULE_ALIAS("platform:cs5535-smb");
+MODULE_LICENSE("GPL");
+
+#define MAX_DEVICES 4
+static int base[MAX_DEVICES] = { 0x820, 0x840 };
+module_param_hw_array(base, int, ioport, NULL, 0);
+MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
+
+#define POLL_TIMEOUT	(HZ/5)
+
+enum scx200_acb_state {
+	state_idle,
+	state_address,
+	state_command,
+	state_repeat_start,
+	state_quick,
+	state_read,
+	state_write,
+};
+
+static const char *scx200_acb_state_name[] = {
+	"idle",
+	"address",
+	"command",
+	"repeat_start",
+	"quick",
+	"read",
+	"write",
+};
+
+/* Physical interface */
+struct scx200_acb_iface {
+	struct scx200_acb_iface *next;
+	struct i2c_adapter adapter;
+	unsigned base;
+	struct mutex mutex;
+
+	/* State machine data */
+	enum scx200_acb_state state;
+	int result;
+	u8 address_byte;
+	u8 command;
+	u8 *ptr;
+	char needs_reset;
+	unsigned len;
+};
+
+/* Register Definitions */
+#define ACBSDA		(iface->base + 0)
+#define ACBST		(iface->base + 1)
+#define    ACBST_SDAST		0x40 /* SDA Status */
+#define    ACBST_BER		0x20
+#define    ACBST_NEGACK		0x10 /* Negative Acknowledge */
+#define    ACBST_STASTR		0x08 /* Stall After Start */
+#define    ACBST_MASTER		0x02
+#define ACBCST		(iface->base + 2)
+#define    ACBCST_BB		0x02
+#define ACBCTL1		(iface->base + 3)
+#define    ACBCTL1_STASTRE	0x80
+#define    ACBCTL1_NMINTE	0x40
+#define    ACBCTL1_ACK		0x10
+#define    ACBCTL1_STOP		0x02
+#define    ACBCTL1_START	0x01
+#define ACBADDR		(iface->base + 4)
+#define ACBCTL2		(iface->base + 5)
+#define    ACBCTL2_ENABLE	0x01
+
+/************************************************************************/
+
+static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
+{
+	const char *errmsg;
+
+	dev_dbg(&iface->adapter.dev, "state %s, status = 0x%02x\n",
+		scx200_acb_state_name[iface->state], status);
+
+	if (status & ACBST_BER) {
+		errmsg = "bus error";
+		goto error;
+	}
+	if (!(status & ACBST_MASTER)) {
+		errmsg = "not master";
+		goto error;
+	}
+	if (status & ACBST_NEGACK) {
+		dev_dbg(&iface->adapter.dev, "negative ack in state %s\n",
+			scx200_acb_state_name[iface->state]);
+
+		iface->state = state_idle;
+		iface->result = -ENXIO;
+
+		outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+		outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+
+		/* Reset the status register */
+		outb(0, ACBST);
+		return;
+	}
+
+	switch (iface->state) {
+	case state_idle:
+		dev_warn(&iface->adapter.dev, "interrupt in idle state\n");
+		break;
+
+	case state_address:
+		/* Do a pointer write first */
+		outb(iface->address_byte & ~1, ACBSDA);
+
+		iface->state = state_command;
+		break;
+
+	case state_command:
+		outb(iface->command, ACBSDA);
+
+		if (iface->address_byte & 1)
+			iface->state = state_repeat_start;
+		else
+			iface->state = state_write;
+		break;
+
+	case state_repeat_start:
+		outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
+		/* fallthrough */
+
+	case state_quick:
+		if (iface->address_byte & 1) {
+			if (iface->len == 1)
+				outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
+			else
+				outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
+			outb(iface->address_byte, ACBSDA);
+
+			iface->state = state_read;
+		} else {
+			outb(iface->address_byte, ACBSDA);
+
+			iface->state = state_write;
+		}
+		break;
+
+	case state_read:
+		/* Set ACK if _next_ byte will be the last one */
+		if (iface->len == 2)
+			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
+		else
+			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
+
+		if (iface->len == 1) {
+			iface->result = 0;
+			iface->state = state_idle;
+			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+		}
+
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
+		break;
+
+	case state_write:
+		if (iface->len == 0) {
+			iface->result = 0;
+			iface->state = state_idle;
+			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+			break;
+		}
+
+		outb(*iface->ptr++, ACBSDA);
+		--iface->len;
+
+		break;
+	}
+
+	return;
+
+ error:
+	dev_err(&iface->adapter.dev,
+		"%s in state %s (addr=0x%02x, len=%d, status=0x%02x)\n", errmsg,
+		scx200_acb_state_name[iface->state], iface->address_byte,
+		iface->len, status);
+
+	iface->state = state_idle;
+	iface->result = -EIO;
+	iface->needs_reset = 1;
+}
+
+static void scx200_acb_poll(struct scx200_acb_iface *iface)
+{
+	u8 status;
+	unsigned long timeout;
+
+	timeout = jiffies + POLL_TIMEOUT;
+	while (1) {
+		status = inb(ACBST);
+
+		/* Reset the status register to avoid the hang */
+		outb(0, ACBST);
+
+		if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
+			scx200_acb_machine(iface, status);
+			return;
+		}
+		if (time_after(jiffies, timeout))
+			break;
+		cpu_relax();
+		cond_resched();
+	}
+
+	dev_err(&iface->adapter.dev, "timeout in state %s\n",
+		scx200_acb_state_name[iface->state]);
+
+	iface->state = state_idle;
+	iface->result = -EIO;
+	iface->needs_reset = 1;
+}
+
+static void scx200_acb_reset(struct scx200_acb_iface *iface)
+{
+	/* Disable the ACCESS.bus device and Configure the SCL
+	   frequency: 16 clock cycles */
+	outb(0x70, ACBCTL2);
+	/* Polling mode */
+	outb(0, ACBCTL1);
+	/* Disable slave address */
+	outb(0, ACBADDR);
+	/* Enable the ACCESS.bus device */
+	outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2);
+	/* Free STALL after START */
+	outb(inb(ACBCTL1) & ~(ACBCTL1_STASTRE | ACBCTL1_NMINTE), ACBCTL1);
+	/* Send a STOP */
+	outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+	/* Clear BER, NEGACK and STASTR bits */
+	outb(ACBST_BER | ACBST_NEGACK | ACBST_STASTR, ACBST);
+	/* Clear BB bit */
+	outb(inb(ACBCST) | ACBCST_BB, ACBCST);
+}
+
+static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
+				 u16 address, unsigned short flags,
+				 char rw, u8 command, int size,
+				 union i2c_smbus_data *data)
+{
+	struct scx200_acb_iface *iface = i2c_get_adapdata(adapter);
+	int len;
+	u8 *buffer;
+	u16 cur_word;
+	int rc;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		len = 0;
+		buffer = NULL;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		len = 1;
+		buffer = rw ? &data->byte : &command;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		len = 1;
+		buffer = &data->byte;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		len = 2;
+		cur_word = cpu_to_le16(data->word);
+		buffer = (u8 *)&cur_word;
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		len = data->block[0];
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EINVAL;
+		buffer = &data->block[1];
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&adapter->dev,
+		"size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
+		size, address, command, len, rw);
+
+	if (!len && rw == I2C_SMBUS_READ) {
+		dev_dbg(&adapter->dev, "zero length read\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&iface->mutex);
+
+	iface->address_byte = (address << 1) | rw;
+	iface->command = command;
+	iface->ptr = buffer;
+	iface->len = len;
+	iface->result = -EINVAL;
+	iface->needs_reset = 0;
+
+	outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
+
+	if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE)
+		iface->state = state_quick;
+	else
+		iface->state = state_address;
+
+	while (iface->state != state_idle)
+		scx200_acb_poll(iface);
+
+	if (iface->needs_reset)
+		scx200_acb_reset(iface);
+
+	rc = iface->result;
+
+	mutex_unlock(&iface->mutex);
+
+	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ)
+		data->word = le16_to_cpu(cur_word);
+
+#ifdef DEBUG
+	dev_dbg(&adapter->dev, "transfer done, result: %d", rc);
+	if (buffer) {
+		int i;
+		printk(" data:");
+		for (i = 0; i < len; ++i)
+			printk(" %02x", buffer[i]);
+	}
+	printk("\n");
+#endif
+
+	return rc;
+}
+
+static u32 scx200_acb_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static const struct i2c_algorithm scx200_acb_algorithm = {
+	.smbus_xfer	= scx200_acb_smbus_xfer,
+	.functionality	= scx200_acb_func,
+};
+
+static struct scx200_acb_iface *scx200_acb_list;
+static DEFINE_MUTEX(scx200_acb_list_mutex);
+
+static int scx200_acb_probe(struct scx200_acb_iface *iface)
+{
+	u8 val;
+
+	/* Disable the ACCESS.bus device and Configure the SCL
+	   frequency: 16 clock cycles */
+	outb(0x70, ACBCTL2);
+
+	if (inb(ACBCTL2) != 0x70) {
+		pr_debug("ACBCTL2 readback failed\n");
+		return -ENXIO;
+	}
+
+	outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1);
+
+	val = inb(ACBCTL1);
+	if (val) {
+		pr_debug("disabled, but ACBCTL1=0x%02x\n", val);
+		return -ENXIO;
+	}
+
+	outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2);
+
+	outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1);
+
+	val = inb(ACBCTL1);
+	if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) {
+		pr_debug("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n",
+			 val);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static struct scx200_acb_iface *scx200_create_iface(const char *text,
+		struct device *dev, int index)
+{
+	struct scx200_acb_iface *iface;
+	struct i2c_adapter *adapter;
+
+	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
+	if (!iface)
+		return NULL;
+
+	adapter = &iface->adapter;
+	i2c_set_adapdata(adapter, iface);
+	snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
+	adapter->owner = THIS_MODULE;
+	adapter->algo = &scx200_acb_algorithm;
+	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adapter->dev.parent = dev;
+
+	mutex_init(&iface->mutex);
+
+	return iface;
+}
+
+static int scx200_acb_create(struct scx200_acb_iface *iface)
+{
+	struct i2c_adapter *adapter;
+	int rc;
+
+	adapter = &iface->adapter;
+
+	rc = scx200_acb_probe(iface);
+	if (rc) {
+		pr_warn("probe failed\n");
+		return rc;
+	}
+
+	scx200_acb_reset(iface);
+
+	if (i2c_add_adapter(adapter) < 0) {
+		pr_err("failed to register\n");
+		return -ENODEV;
+	}
+
+	if (!adapter->dev.parent) {
+		/* If there's no dev, we're tracking (ISA) ifaces manually */
+		mutex_lock(&scx200_acb_list_mutex);
+		iface->next = scx200_acb_list;
+		scx200_acb_list = iface;
+		mutex_unlock(&scx200_acb_list_mutex);
+	}
+
+	return 0;
+}
+
+static struct scx200_acb_iface *scx200_create_dev(const char *text,
+		unsigned long base, int index, struct device *dev)
+{
+	struct scx200_acb_iface *iface;
+	int rc;
+
+	iface = scx200_create_iface(text, dev, index);
+
+	if (iface == NULL)
+		return NULL;
+
+	if (!request_region(base, 8, iface->adapter.name)) {
+		pr_err("can't allocate io 0x%lx-0x%lx\n", base, base + 8 - 1);
+		goto errout_free;
+	}
+
+	iface->base = base;
+	rc = scx200_acb_create(iface);
+
+	if (rc == 0)
+		return iface;
+
+	release_region(base, 8);
+ errout_free:
+	kfree(iface);
+	return NULL;
+}
+
+static int scx200_probe(struct platform_device *pdev)
+{
+	struct scx200_acb_iface *iface;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't fetch device resource info\n");
+		return -ENODEV;
+	}
+
+	iface = scx200_create_dev("CS5535", res->start, 0, &pdev->dev);
+	if (!iface)
+		return -EIO;
+
+	dev_info(&pdev->dev, "SCx200 device '%s' registered\n",
+			iface->adapter.name);
+	platform_set_drvdata(pdev, iface);
+
+	return 0;
+}
+
+static void scx200_cleanup_iface(struct scx200_acb_iface *iface)
+{
+	i2c_del_adapter(&iface->adapter);
+	release_region(iface->base, 8);
+	kfree(iface);
+}
+
+static int scx200_remove(struct platform_device *pdev)
+{
+	struct scx200_acb_iface *iface;
+
+	iface = platform_get_drvdata(pdev);
+	scx200_cleanup_iface(iface);
+
+	return 0;
+}
+
+static struct platform_driver scx200_pci_driver = {
+	.driver = {
+		.name = "cs5535-smb",
+	},
+	.probe = scx200_probe,
+	.remove = scx200_remove,
+};
+
+static const struct pci_device_id scx200_isa[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
+	{ 0, }
+};
+
+static __init void scx200_scan_isa(void)
+{
+	int i;
+
+	if (!pci_dev_present(scx200_isa))
+		return;
+
+	for (i = 0; i < MAX_DEVICES; ++i) {
+		if (base[i] == 0)
+			continue;
+
+		/* XXX: should we care about failures? */
+		scx200_create_dev("SCx200", base[i], i, NULL);
+	}
+}
+
+static int __init scx200_acb_init(void)
+{
+	pr_debug("NatSemi SCx200 ACCESS.bus Driver\n");
+
+	/* First scan for ISA-based devices */
+	scx200_scan_isa();	/* XXX: should we care about errors? */
+
+	/* If at least one bus was created, init must succeed */
+	if (scx200_acb_list)
+		return 0;
+
+	/* No ISA devices; register the platform driver for PCI-based devices */
+	return platform_driver_register(&scx200_pci_driver);
+}
+
+static void __exit scx200_acb_cleanup(void)
+{
+	struct scx200_acb_iface *iface;
+
+	platform_driver_unregister(&scx200_pci_driver);
+
+	mutex_lock(&scx200_acb_list_mutex);
+	while ((iface = scx200_acb_list) != NULL) {
+		scx200_acb_list = iface->next;
+		mutex_unlock(&scx200_acb_list_mutex);
+
+		scx200_cleanup_iface(iface);
+
+		mutex_lock(&scx200_acb_list_mutex);
+	}
+	mutex_unlock(&scx200_acb_list_mutex);
+}
+
+module_init(scx200_acb_init);
+module_exit(scx200_acb_cleanup);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-boardinfo.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-boardinfo.c
new file mode 100644
index 0000000..509a600
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-boardinfo.c
@@ -0,0 +1,113 @@
+/*
+ * i2c-boardinfo.c - collect pre-declarations of I2C devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/property.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+
+/* These symbols are exported ONLY FOR the i2c core.
+ * No other users will be supported.
+ */
+DECLARE_RWSEM(__i2c_board_lock);
+EXPORT_SYMBOL_GPL(__i2c_board_lock);
+
+LIST_HEAD(__i2c_board_list);
+EXPORT_SYMBOL_GPL(__i2c_board_list);
+
+int __i2c_first_dynamic_bus_num;
+EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num);
+
+
+/**
+ * i2c_register_board_info - statically declare I2C devices
+ * @busnum: identifies the bus to which these devices belong
+ * @info: vector of i2c device descriptors
+ * @len: how many descriptors in the vector; may be zero to reserve
+ *	the specified bus number.
+ *
+ * Systems using the Linux I2C driver stack can declare tables of board info
+ * while they initialize.  This should be done in board-specific init code
+ * near arch_initcall() time, or equivalent, before any I2C adapter driver is
+ * registered.  For example, mainboard init code could define several devices,
+ * as could the init code for each daughtercard in a board stack.
+ *
+ * The I2C devices will be created later, after the adapter for the relevant
+ * bus has been registered.  After that moment, standard driver model tools
+ * are used to bind "new style" I2C drivers to the devices.  The bus number
+ * for any device declared using this routine is not available for dynamic
+ * allocation.
+ *
+ * The board info passed can safely be __initdata, but be careful of embedded
+ * pointers (for platform_data, functions, etc) since that won't be copied.
+ * Device properties are deep-copied though.
+ */
+int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len)
+{
+	int status;
+
+	down_write(&__i2c_board_lock);
+
+	/* dynamic bus numbers will be assigned after the last static one */
+	if (busnum >= __i2c_first_dynamic_bus_num)
+		__i2c_first_dynamic_bus_num = busnum + 1;
+
+	for (status = 0; len; len--, info++) {
+		struct i2c_devinfo	*devinfo;
+
+		devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
+		if (!devinfo) {
+			pr_debug("i2c-core: can't register boardinfo!\n");
+			status = -ENOMEM;
+			break;
+		}
+
+		devinfo->busnum = busnum;
+		devinfo->board_info = *info;
+
+		if (info->properties) {
+			devinfo->board_info.properties =
+					property_entries_dup(info->properties);
+			if (IS_ERR(devinfo->board_info.properties)) {
+				status = PTR_ERR(devinfo->board_info.properties);
+				kfree(devinfo);
+				break;
+			}
+		}
+
+		if (info->resources) {
+			devinfo->board_info.resources =
+				kmemdup(info->resources,
+					info->num_resources *
+						sizeof(*info->resources),
+					GFP_KERNEL);
+			if (!devinfo->board_info.resources) {
+				status = -ENOMEM;
+				kfree(devinfo);
+				break;
+			}
+		}
+
+		list_add_tail(&devinfo->list, &__i2c_board_list);
+	}
+
+	up_write(&__i2c_board_lock);
+
+	return status;
+}
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core-acpi.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-acpi.c
new file mode 100644
index 0000000..0d4d5dc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-acpi.c
@@ -0,0 +1,715 @@
+/*
+ * Linux I2C core ACPI support code
+ *
+ * Copyright (C) 2014 Intel Corp, Author: Lan Tianyu <tianyu.lan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+struct i2c_acpi_handler_data {
+	struct acpi_connection_info info;
+	struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+	u8	status;
+	u8	len;
+	union {
+		u16	wdata;
+		u8	bdata;
+		u8	data[0];
+	};
+} __packed;
+
+struct i2c_acpi_lookup {
+	struct i2c_board_info *info;
+	acpi_handle adapter_handle;
+	acpi_handle device_handle;
+	acpi_handle search_handle;
+	int n;
+	int index;
+	u32 speed;
+	u32 min_speed;
+	u32 force_speed;
+};
+
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
+{
+	struct i2c_acpi_lookup *lookup = data;
+	struct i2c_board_info *info = lookup->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	acpi_status status;
+
+	if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return 1;
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+		return 1;
+
+	if (lookup->index != -1 && lookup->n++ != lookup->index)
+		return 1;
+
+	status = acpi_get_handle(lookup->device_handle,
+				 sb->resource_source.string_ptr,
+				 &lookup->adapter_handle);
+	if (!ACPI_SUCCESS(status))
+		return 1;
+
+	info->addr = sb->slave_address;
+	lookup->speed = sb->connection_speed;
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		info->flags |= I2C_CLIENT_TEN;
+
+	return 1;
+}
+
+static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
+	/*
+	 * ACPI video acpi_devices, which are handled by the acpi-video driver
+	 * sometimes contain a SERIAL_TYPE_I2C ACPI resource, ignore these.
+	 */
+	{ ACPI_VIDEO_HID, 0 },
+	{}
+};
+
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+			      struct i2c_acpi_lookup *lookup)
+{
+	struct i2c_board_info *info = lookup->info;
+	struct list_head resource_list;
+	int ret;
+
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
+		return -EINVAL;
+
+	if (acpi_match_device_ids(adev, i2c_acpi_ignored_device_ids) == 0)
+		return -ENODEV;
+
+	memset(info, 0, sizeof(*info));
+	lookup->device_handle = acpi_device_handle(adev);
+
+	/* Look up for I2cSerialBus resource */
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     i2c_acpi_fill_info, lookup);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info->addr)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+			     struct i2c_board_info *info,
+			     struct i2c_adapter *adapter,
+			     acpi_handle *adapter_handle)
+{
+	struct list_head resource_list;
+	struct resource_entry *entry;
+	struct i2c_acpi_lookup lookup;
+	int ret;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.info = info;
+	lookup.index = -1;
+
+	ret = i2c_acpi_do_lookup(adev, &lookup);
+	if (ret)
+		return ret;
+
+	if (adapter) {
+		/* The adapter must match the one in I2cSerialBus() connector */
+		if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+			return -ENODEV;
+	} else {
+		struct acpi_device *adapter_adev;
+
+		/* The adapter must be present */
+		if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+			return -ENODEV;
+		if (acpi_bus_get_status(adapter_adev) ||
+		    !adapter_adev->status.present)
+			return -ENODEV;
+	}
+
+	info->fwnode = acpi_fwnode_handle(adev);
+	if (adapter_handle)
+		*adapter_handle = lookup.adapter_handle;
+
+	/* Then fill IRQ number if any */
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (ret < 0)
+		return -EINVAL;
+
+	resource_list_for_each_entry(entry, &resource_list) {
+		if (resource_type(entry->res) == IORESOURCE_IRQ) {
+			info->irq = entry->res->start;
+			break;
+		}
+	}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
+			  sizeof(info->type));
+
+	return 0;
+}
+
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
+				     struct acpi_device *adev,
+				     struct i2c_board_info *info)
+{
+	adev->power.flags.ignore_parent = true;
+	acpi_device_set_enumerated(adev);
+
+	if (!i2c_new_device(adapter, info)) {
+		adev->power.flags.ignore_parent = false;
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+}
+
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct acpi_device *adev;
+	struct i2c_board_info info;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (i2c_acpi_get_info(adev, &info, adapter, NULL))
+		return AE_OK;
+
+	i2c_acpi_register_device(adapter, adev, &info);
+
+	return AE_OK;
+}
+
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
+
+/**
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void i2c_acpi_register_devices(struct i2c_adapter *adap)
+{
+	acpi_status status;
+
+	if (!has_acpi_companion(&adap->dev))
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+const struct acpi_device_id *
+i2c_acpi_match_device(const struct acpi_device_id *matches,
+		      struct i2c_client *client)
+{
+	if (!(client && matches))
+		return NULL;
+
+	return acpi_match_device(matches, &client->dev);
+}
+
+static const struct acpi_device_id i2c_acpi_force_400khz_device_ids[] = {
+	/*
+	 * These Silead touchscreen controllers only work at 400KHz, for
+	 * some reason they do not work at 100KHz. On some devices the ACPI
+	 * tables list another device at their bus as only being capable
+	 * of 100KHz, testing has shown that these other devices work fine
+	 * at 400KHz (as can be expected of any recent i2c hw) so we force
+	 * the speed of the bus to 400 KHz if a Silead device is present.
+	 */
+	{ "MSSL1680", 0 },
+	{}
+};
+
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+					   void *data, void **return_value)
+{
+	struct i2c_acpi_lookup *lookup = data;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (i2c_acpi_do_lookup(adev, lookup))
+		return AE_OK;
+
+	if (lookup->search_handle != lookup->adapter_handle)
+		return AE_OK;
+
+	if (lookup->speed <= lookup->min_speed)
+		lookup->min_speed = lookup->speed;
+
+	if (acpi_match_device_ids(adev, i2c_acpi_force_400khz_device_ids) == 0)
+		lookup->force_speed = 400000;
+
+	return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+	struct i2c_acpi_lookup lookup;
+	struct i2c_board_info dummy;
+	acpi_status status;
+
+	if (!has_acpi_companion(dev))
+		return 0;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.search_handle = ACPI_HANDLE(dev);
+	lookup.min_speed = UINT_MAX;
+	lookup.info = &dummy;
+	lookup.index = -1;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_lookup_speed, NULL,
+				     &lookup, NULL);
+
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+		return 0;
+	}
+
+	if (lookup.force_speed) {
+		if (lookup.force_speed != lookup.min_speed)
+			dev_warn(dev, FW_BUG "DSDT uses known not-working I2C bus speed %d, forcing it to %d\n",
+				 lookup.min_speed, lookup.force_speed);
+		return lookup.force_speed;
+	} else if (lookup.min_speed != UINT_MAX) {
+		return lookup.min_speed;
+	} else {
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_find_match_adapter(struct device *dev, void *data)
+{
+	struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+	if (!adapter)
+		return 0;
+
+	return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int i2c_acpi_find_match_device(struct device *dev, void *data)
+{
+	return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, handle,
+			      i2c_acpi_find_match_adapter);
+	return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
+{
+	struct device *dev;
+	struct i2c_client *client;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, adev,
+			      i2c_acpi_find_match_device);
+	if (!dev)
+		return NULL;
+
+	client = i2c_verify_client(dev);
+	if (!client)
+		put_device(dev);
+
+	return client;
+}
+
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
+			   void *arg)
+{
+	struct acpi_device *adev = arg;
+	struct i2c_board_info info;
+	acpi_handle adapter_handle;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+
+	switch (value) {
+	case ACPI_RECONFIG_DEVICE_ADD:
+		if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
+			break;
+
+		adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
+		if (!adapter)
+			break;
+
+		i2c_acpi_register_device(adapter, adev, &info);
+		break;
+	case ACPI_RECONFIG_DEVICE_REMOVE:
+		if (!acpi_device_enumerated(adev))
+			break;
+
+		client = i2c_acpi_find_client_by_adev(adev);
+		if (!client)
+			break;
+
+		i2c_unregister_device(client);
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block i2c_acpi_notifier = {
+	.notifier_call = i2c_acpi_notify,
+};
+
+/**
+ * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
+ * @dev:     Device owning the ACPI resources to get the client from
+ * @index:   Index of ACPI resource to get
+ * @info:    describes the I2C device; note this is modified (addr gets set)
+ * Context: can sleep
+ *
+ * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
+ * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
+ * resources, in that case this function can be used to create an i2c-client
+ * for other I2cSerialBus resources in the Current Resource Settings table.
+ *
+ * Also see i2c_new_device, which this function calls to create the i2c-client.
+ *
+ * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ */
+struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
+				       struct i2c_board_info *info)
+{
+	struct i2c_acpi_lookup lookup;
+	struct i2c_adapter *adapter;
+	struct acpi_device *adev;
+	LIST_HEAD(resource_list);
+	int ret;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return NULL;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.info = info;
+	lookup.device_handle = acpi_device_handle(adev);
+	lookup.index = index;
+
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     i2c_acpi_fill_info, &lookup);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info->addr)
+		return NULL;
+
+	adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
+	if (!adapter)
+		return NULL;
+
+	return i2c_new_device(adapter, info);
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[2];
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(data_len, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = client->flags | I2C_M_RD;
+	msgs[1].len = data_len;
+	msgs[1].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c read failed\n");
+	else
+		memcpy(data, buffer, data_len);
+
+	kfree(buffer);
+	return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[1];
+	u8 *buffer;
+	int ret = AE_OK;
+
+	buffer = kzalloc(data_len + 1, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	buffer[0] = cmd;
+	memcpy(buffer + 1, data, data_len);
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = data_len + 1;
+	msgs[0].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+
+	kfree(buffer);
+
+	if (ret < 0) {
+		dev_err(&client->adapter->dev, "i2c write failed: %d\n", ret);
+		return ret;
+	}
+
+	/* 1 transfer must have completed successfully */
+	return (ret == 1) ? 0 : -EIO;
+}
+
+static acpi_status
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
+			u32 bits, u64 *value64,
+			void *handler_context, void *region_context)
+{
+	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+	struct i2c_acpi_handler_data *data = handler_context;
+	struct acpi_connection_info *info = &data->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	struct i2c_adapter *adapter = data->adapter;
+	struct i2c_client *client;
+	struct acpi_resource *ares;
+	u32 accessor_type = function >> 16;
+	u8 action = function & ACPI_IO_MASK;
+	acpi_status ret;
+	int status;
+
+	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+	if (ACPI_FAILURE(ret))
+		return ret;
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (!client) {
+		ret = AE_NO_MEMORY;
+		goto err;
+	}
+
+	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	client->adapter = adapter;
+	client->addr = sb->slave_address;
+
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		client->flags |= I2C_CLIENT_TEN;
+
+	switch (accessor_type) {
+	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte(client);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte(client, gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte_data(client, command);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte_data(client, command,
+					gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_WORD:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_word_data(client, command);
+			if (status >= 0) {
+				gsb->wdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_word_data(client, command,
+					gsb->wdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_block_data(client, command,
+					gsb->data);
+			if (status >= 0) {
+				gsb->len = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_block_data(client, command,
+					gsb->len, gsb->data);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+		if (action == ACPI_READ) {
+			status = acpi_gsb_i2c_read_bytes(client, command,
+					gsb->data, info->access_length);
+			if (status > 0)
+				status = 0;
+		} else {
+			status = acpi_gsb_i2c_write_bytes(client, command,
+					gsb->data, info->access_length);
+		}
+		break;
+
+	default:
+		dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+			 accessor_type, client->addr);
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	gsb->status = status;
+
+ err:
+	kfree(client);
+	ACPI_FREE(ares);
+	return ret;
+}
+
+
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct i2c_acpi_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return -ENODEV;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct i2c_acpi_handler_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->adapter = adapter;
+	status = acpi_bus_attach_private_data(handle, (void *)data);
+	if (ACPI_FAILURE(status)) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&i2c_acpi_space_handler,
+				NULL,
+				data);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&adapter->dev, "Error installing i2c space handler\n");
+		acpi_bus_detach_private_data(handle);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	acpi_walk_dep_device_list(handle);
+	return 0;
+}
+
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct i2c_acpi_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return;
+
+	acpi_remove_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&i2c_acpi_space_handler);
+
+	status = acpi_bus_get_private_data(handle, (void **)&data);
+	if (ACPI_SUCCESS(status))
+		kfree(data);
+
+	acpi_bus_detach_private_data(handle);
+}
+#endif /* CONFIG_ACPI_I2C_OPREGION */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core-base.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-base.c
new file mode 100644
index 0000000..9f2aa45
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-base.c
@@ -0,0 +1,2249 @@
+/*
+ * Linux I2C core
+ *
+ * Copyright (C) 1995-99 Simon G. Vogl
+ *   With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
+ *   Mux support by Rodolfo Giometti <giometti@enneenne.com> and
+ *   Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * Copyright (C) 2013-2017 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "i2c-core: " fmt
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/property.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c.h>
+
+#define I2C_ADDR_OFFSET_TEN_BIT	0xa000
+#define I2C_ADDR_OFFSET_SLAVE	0x1000
+
+#define I2C_ADDR_7BITS_MAX	0x77
+#define I2C_ADDR_7BITS_COUNT	(I2C_ADDR_7BITS_MAX + 1)
+
+/*
+ * core_lock protects i2c_adapter_idr, and guarantees that device detection,
+ * deletion of detected devices, and attach_adapter calls are serialized
+ */
+static DEFINE_MUTEX(core_lock);
+static DEFINE_IDR(i2c_adapter_idr);
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
+
+static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+static bool is_registered;
+
+int i2c_transfer_trace_reg(void)
+{
+	static_key_slow_inc(&i2c_trace_msg);
+	return 0;
+}
+
+void i2c_transfer_trace_unreg(void)
+{
+	static_key_slow_dec(&i2c_trace_msg);
+}
+
+const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
+						const struct i2c_client *client)
+{
+	if (!(id && client))
+		return NULL;
+
+	while (id->name[0]) {
+		if (strcmp(client->name, id->name) == 0)
+			return id;
+		id++;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(i2c_match_id);
+
+static int i2c_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_driver	*driver;
+
+
+	/* Attempt an OF style match */
+	if (i2c_of_match_device(drv->of_match_table, client))
+		return 1;
+
+	/* Then ACPI style match */
+	if (acpi_driver_match_device(dev, drv))
+		return 1;
+
+	driver = to_i2c_driver(drv);
+
+	/* Finally an I2C match */
+	if (i2c_match_id(driver->id_table, client))
+		return 1;
+
+	return 0;
+}
+
+static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int rc;
+
+	rc = acpi_device_uevent_modalias(dev, env);
+	if (rc != -ENODEV)
+		return rc;
+
+	return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
+}
+
+/* i2c bus recovery routines */
+static int get_scl_gpio_value(struct i2c_adapter *adap)
+{
+	return gpio_get_value(adap->bus_recovery_info->scl_gpio);
+}
+
+static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
+{
+	gpio_set_value(adap->bus_recovery_info->scl_gpio, val);
+}
+
+static int get_sda_gpio_value(struct i2c_adapter *adap)
+{
+	return gpio_get_value(adap->bus_recovery_info->sda_gpio);
+}
+
+static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+	struct device *dev = &adap->dev;
+	int ret = 0;
+
+	ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN |
+			GPIOF_OUT_INIT_HIGH, "i2c-scl");
+	if (ret) {
+		dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
+		return ret;
+	}
+
+	if (bri->get_sda) {
+		if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
+			/* work without SDA polling */
+			dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n",
+					bri->sda_gpio);
+			bri->get_sda = NULL;
+		}
+	}
+
+	return ret;
+}
+
+static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+
+	if (bri->get_sda)
+		gpio_free(bri->sda_gpio);
+
+	gpio_free(bri->scl_gpio);
+}
+
+/*
+ * We are generating clock pulses. ndelay() determines durating of clk pulses.
+ * We will generate clock with rate 100 KHz and so duration of both clock levels
+ * is: delay in ns = (10^6 / 100) / 2
+ */
+#define RECOVERY_NDELAY		5000
+#define RECOVERY_CLK_CNT	9
+
+static int i2c_generic_recovery(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+	int i = 0, val = 1, ret = 0;
+
+	if (bri->prepare_recovery)
+		bri->prepare_recovery(adap);
+
+	bri->set_scl(adap, val);
+	ndelay(RECOVERY_NDELAY);
+
+	/*
+	 * By this time SCL is high, as we need to give 9 falling-rising edges
+	 */
+	while (i++ < RECOVERY_CLK_CNT * 2) {
+		if (val) {
+			/* Break if SDA is high */
+			if (bri->get_sda && bri->get_sda(adap))
+					break;
+			/* SCL shouldn't be low here */
+			if (!bri->get_scl(adap)) {
+				dev_err(&adap->dev,
+					"SCL is stuck low, exit recovery\n");
+				ret = -EBUSY;
+				break;
+			}
+		}
+
+		val = !val;
+		bri->set_scl(adap, val);
+		ndelay(RECOVERY_NDELAY);
+	}
+
+	if (bri->unprepare_recovery)
+		bri->unprepare_recovery(adap);
+
+	return ret;
+}
+
+int i2c_generic_scl_recovery(struct i2c_adapter *adap)
+{
+	return i2c_generic_recovery(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
+
+int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
+{
+	int ret;
+
+	ret = i2c_get_gpios_for_recovery(adap);
+	if (ret)
+		return ret;
+
+	ret = i2c_generic_recovery(adap);
+	i2c_put_gpios_for_recovery(adap);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery);
+
+int i2c_recover_bus(struct i2c_adapter *adap)
+{
+	if (!adap->bus_recovery_info)
+		return -EOPNOTSUPP;
+
+	dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
+	return adap->bus_recovery_info->recover_bus(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_recover_bus);
+
+static void i2c_init_recovery(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+	char *err_str;
+
+	if (!bri)
+		return;
+
+	if (!bri->recover_bus) {
+		err_str = "no recover_bus() found";
+		goto err;
+	}
+
+	/* Generic GPIO recovery */
+	if (bri->recover_bus == i2c_generic_gpio_recovery) {
+		if (!gpio_is_valid(bri->scl_gpio)) {
+			err_str = "invalid SCL gpio";
+			goto err;
+		}
+
+		if (gpio_is_valid(bri->sda_gpio))
+			bri->get_sda = get_sda_gpio_value;
+		else
+			bri->get_sda = NULL;
+
+		bri->get_scl = get_scl_gpio_value;
+		bri->set_scl = set_scl_gpio_value;
+	} else if (bri->recover_bus == i2c_generic_scl_recovery) {
+		/* Generic SCL recovery */
+		if (!bri->set_scl || !bri->get_scl) {
+			err_str = "no {get|set}_scl() found";
+			goto err;
+		}
+	}
+
+	return;
+ err:
+	dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+	adap->bus_recovery_info = NULL;
+}
+
+static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
+{
+	struct i2c_adapter *adap = client->adapter;
+	unsigned int irq;
+
+	if (!adap->host_notify_domain)
+		return -ENXIO;
+
+	if (client->flags & I2C_CLIENT_TEN)
+		return -EINVAL;
+
+	irq = irq_find_mapping(adap->host_notify_domain, client->addr);
+	if (!irq)
+		irq = irq_create_mapping(adap->host_notify_domain,
+					 client->addr);
+
+	return irq > 0 ? irq : -ENXIO;
+}
+
+static int i2c_device_probe(struct device *dev)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_driver	*driver;
+	int status;
+
+	if (!client)
+		return 0;
+
+	driver = to_i2c_driver(dev->driver);
+
+	if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
+		int irq = -ENOENT;
+
+		if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
+			dev_dbg(dev, "Using Host Notify IRQ\n");
+			irq = i2c_smbus_host_notify_to_irq(client);
+		} else if (dev->of_node) {
+			irq = of_irq_get_byname(dev->of_node, "irq");
+			if (irq == -EINVAL || irq == -ENODATA)
+				irq = of_irq_get(dev->of_node, 0);
+		} else if (ACPI_COMPANION(dev)) {
+			irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
+		}
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		if (irq < 0)
+			irq = 0;
+
+		client->irq = irq;
+	}
+
+	/*
+	 * An I2C ID table is not mandatory, if and only if, a suitable OF
+	 * or ACPI ID table is supplied for the probing device.
+	 */
+	if (!driver->id_table &&
+	    !i2c_acpi_match_device(dev->driver->acpi_match_table, client) &&
+	    !i2c_of_match_device(dev->driver->of_match_table, client))
+		return -ENODEV;
+
+	if (client->flags & I2C_CLIENT_WAKE) {
+		int wakeirq = -ENOENT;
+
+		if (dev->of_node) {
+			wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
+			if (wakeirq == -EPROBE_DEFER)
+				return wakeirq;
+		}
+
+		device_init_wakeup(&client->dev, true);
+
+		if (wakeirq > 0 && wakeirq != client->irq)
+			status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
+		else if (client->irq > 0)
+			status = dev_pm_set_wake_irq(dev, client->irq);
+		else
+			status = 0;
+
+		if (status)
+			dev_warn(&client->dev, "failed to set up wakeup irq\n");
+	}
+
+	dev_dbg(dev, "probe\n");
+
+	status = of_clk_set_defaults(dev->of_node, false);
+	if (status < 0)
+		goto err_clear_wakeup_irq;
+
+	status = dev_pm_domain_attach(&client->dev, true);
+	if (status == -EPROBE_DEFER)
+		goto err_clear_wakeup_irq;
+
+	/*
+	 * When there are no more users of probe(),
+	 * rename probe_new to probe.
+	 */
+	if (driver->probe_new)
+		status = driver->probe_new(client);
+	else if (driver->probe)
+		status = driver->probe(client,
+				       i2c_match_id(driver->id_table, client));
+	else
+		status = -EINVAL;
+
+	if (status)
+		goto err_detach_pm_domain;
+
+	return 0;
+
+err_detach_pm_domain:
+	dev_pm_domain_detach(&client->dev, true);
+err_clear_wakeup_irq:
+	dev_pm_clear_wake_irq(&client->dev);
+	device_init_wakeup(&client->dev, false);
+	return status;
+}
+
+static int i2c_device_remove(struct device *dev)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_driver	*driver;
+	int status = 0;
+
+	if (!client || !dev->driver)
+		return 0;
+
+	driver = to_i2c_driver(dev->driver);
+	if (driver->remove) {
+		dev_dbg(dev, "remove\n");
+		status = driver->remove(client);
+	}
+
+	dev_pm_domain_detach(&client->dev, true);
+
+	dev_pm_clear_wake_irq(&client->dev);
+	device_init_wakeup(&client->dev, false);
+
+	return status;
+}
+
+static void i2c_device_shutdown(struct device *dev)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	struct i2c_driver *driver;
+
+	if (!client || !dev->driver)
+		return;
+	driver = to_i2c_driver(dev->driver);
+	if (driver->shutdown)
+		driver->shutdown(client);
+}
+
+static void i2c_client_dev_release(struct device *dev)
+{
+	kfree(to_i2c_client(dev));
+}
+
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
+		       to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static ssize_t
+show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int len;
+
+	len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
+	if (len != -ENODEV)
+		return len;
+
+	return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
+}
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
+static struct attribute *i2c_dev_attrs[] = {
+	&dev_attr_name.attr,
+	/* modalias helps coldplug:  modprobe $(cat .../modalias) */
+	&dev_attr_modalias.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(i2c_dev);
+
+struct bus_type i2c_bus_type = {
+	.name		= "i2c",
+	.match		= i2c_device_match,
+	.probe		= i2c_device_probe,
+	.remove		= i2c_device_remove,
+	.shutdown	= i2c_device_shutdown,
+};
+EXPORT_SYMBOL_GPL(i2c_bus_type);
+
+struct device_type i2c_client_type = {
+	.groups		= i2c_dev_groups,
+	.uevent		= i2c_device_uevent,
+	.release	= i2c_client_dev_release,
+};
+EXPORT_SYMBOL_GPL(i2c_client_type);
+
+
+/**
+ * i2c_verify_client - return parameter as i2c_client, or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find.  Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_client.
+ */
+struct i2c_client *i2c_verify_client(struct device *dev)
+{
+	return (dev->type == &i2c_client_type)
+			? to_i2c_client(dev)
+			: NULL;
+}
+EXPORT_SYMBOL(i2c_verify_client);
+
+
+/* Return a unique address which takes the flags of the client into account */
+static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
+{
+	unsigned short addr = client->addr;
+
+	/* For some client flags, add an arbitrary offset to avoid collisions */
+	if (client->flags & I2C_CLIENT_TEN)
+		addr |= I2C_ADDR_OFFSET_TEN_BIT;
+
+	if (client->flags & I2C_CLIENT_SLAVE)
+		addr |= I2C_ADDR_OFFSET_SLAVE;
+
+	return addr;
+}
+
+/* This is a permissive address validity check, I2C address map constraints
+ * are purposely not enforced, except for the general call address. */
+int i2c_check_addr_validity(unsigned addr, unsigned short flags)
+{
+	if (flags & I2C_CLIENT_TEN) {
+		/* 10-bit address, all values are valid */
+		if (addr > 0x3ff)
+			return -EINVAL;
+	} else {
+		/* 7-bit address, reject the general call address */
+		if (addr == 0x00 || addr > 0x7f)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+/* And this is a strict address validity check, used when probing. If a
+ * device uses a reserved address, then it shouldn't be probed. 7-bit
+ * addressing is assumed, 10-bit address devices are rare and should be
+ * explicitly enumerated. */
+int i2c_check_7bit_addr_validity_strict(unsigned short addr)
+{
+	/*
+	 * Reserved addresses per I2C specification:
+	 *  0x00       General call address / START byte
+	 *  0x01       CBUS address
+	 *  0x02       Reserved for different bus format
+	 *  0x03       Reserved for future purposes
+	 *  0x04-0x07  Hs-mode master code
+	 *  0x78-0x7b  10-bit slave addressing
+	 *  0x7c-0x7f  Reserved for future purposes
+	 */
+	if (addr < 0x08 || addr > 0x77)
+		return -EINVAL;
+	return 0;
+}
+
+static int __i2c_check_addr_busy(struct device *dev, void *addrp)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	int			addr = *(int *)addrp;
+
+	if (client && i2c_encode_flags_to_addr(client) == addr)
+		return -EBUSY;
+	return 0;
+}
+
+/* walk up mux tree */
+static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+	int result;
+
+	result = device_for_each_child(&adapter->dev, &addr,
+					__i2c_check_addr_busy);
+
+	if (!result && parent)
+		result = i2c_check_mux_parents(parent, addr);
+
+	return result;
+}
+
+/* recurse down mux tree */
+static int i2c_check_mux_children(struct device *dev, void *addrp)
+{
+	int result;
+
+	if (dev->type == &i2c_adapter_type)
+		result = device_for_each_child(dev, addrp,
+						i2c_check_mux_children);
+	else
+		result = __i2c_check_addr_busy(dev, addrp);
+
+	return result;
+}
+
+static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
+{
+	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+	int result = 0;
+
+	if (parent)
+		result = i2c_check_mux_parents(parent, addr);
+
+	if (!result)
+		result = device_for_each_child(&adapter->dev, &addr,
+						i2c_check_mux_children);
+
+	return result;
+}
+
+/**
+ * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
+ *	locks only this branch in the adapter tree
+ */
+static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+}
+
+/**
+ * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
+ *	trylocks only this branch in the adapter tree
+ */
+static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
+ *	unlocks only this branch in the adapter tree
+ */
+static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static void i2c_dev_set_name(struct i2c_adapter *adap,
+			     struct i2c_client *client)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+	if (adev) {
+		dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
+		return;
+	}
+
+	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
+		     i2c_encode_flags_to_addr(client));
+}
+
+static int i2c_dev_irq_from_resources(const struct resource *resources,
+				      unsigned int num_resources)
+{
+	struct irq_data *irqd;
+	int i;
+
+	for (i = 0; i < num_resources; i++) {
+		const struct resource *r = &resources[i];
+
+		if (resource_type(r) != IORESOURCE_IRQ)
+			continue;
+
+		if (r->flags & IORESOURCE_BITS) {
+			irqd = irq_get_irq_data(r->start);
+			if (!irqd)
+				break;
+
+			irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
+		}
+
+		return r->start;
+	}
+
+	return 0;
+}
+
+/**
+ * i2c_new_device - instantiate an i2c device
+ * @adap: the adapter managing the device
+ * @info: describes one I2C device; bus_num is ignored
+ * Context: can sleep
+ *
+ * Create an i2c device. Binding is handled through driver model
+ * probe()/remove() methods.  A driver may be bound to this device when we
+ * return from this function, or any later moment (e.g. maybe hotplugging will
+ * load the driver module).  This call is not appropriate for use by mainboard
+ * initialization logic, which usually runs during an arch_initcall() long
+ * before any i2c_adapter could exist.
+ *
+ * This returns the new i2c client, which may be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *
+i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
+{
+	struct i2c_client	*client;
+	int			status;
+
+	client = kzalloc(sizeof *client, GFP_KERNEL);
+	if (!client)
+		return NULL;
+
+	client->adapter = adap;
+
+	client->dev.platform_data = info->platform_data;
+
+	if (info->archdata)
+		client->dev.archdata = *info->archdata;
+
+	client->flags = info->flags;
+	client->addr = info->addr;
+
+	client->irq = info->irq;
+	if (!client->irq)
+		client->irq = i2c_dev_irq_from_resources(info->resources,
+							 info->num_resources);
+
+	strlcpy(client->name, info->type, sizeof(client->name));
+
+	status = i2c_check_addr_validity(client->addr, client->flags);
+	if (status) {
+		dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
+			client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
+		goto out_err_silent;
+	}
+
+	/* Check for address business */
+	status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
+	if (status)
+		goto out_err;
+
+	client->dev.parent = &client->adapter->dev;
+	client->dev.bus = &i2c_bus_type;
+	client->dev.type = &i2c_client_type;
+	client->dev.of_node = info->of_node;
+	client->dev.fwnode = info->fwnode;
+
+	i2c_dev_set_name(adap, client);
+
+	if (info->properties) {
+		status = device_add_properties(&client->dev, info->properties);
+		if (status) {
+			dev_err(&adap->dev,
+				"Failed to add properties to client %s: %d\n",
+				client->name, status);
+			goto out_err;
+		}
+	}
+
+	status = device_register(&client->dev);
+	if (status)
+		goto out_free_props;
+
+	dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
+		client->name, dev_name(&client->dev));
+
+	return client;
+
+out_free_props:
+	if (info->properties)
+		device_remove_properties(&client->dev);
+out_err:
+	dev_err(&adap->dev,
+		"Failed to register i2c client %s at 0x%02x (%d)\n",
+		client->name, client->addr, status);
+out_err_silent:
+	kfree(client);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(i2c_new_device);
+
+
+/**
+ * i2c_unregister_device - reverse effect of i2c_new_device()
+ * @client: value returned from i2c_new_device()
+ * Context: can sleep
+ */
+void i2c_unregister_device(struct i2c_client *client)
+{
+	if (client->dev.of_node) {
+		of_node_clear_flag(client->dev.of_node, OF_POPULATED);
+		of_node_put(client->dev.of_node);
+	}
+
+	if (ACPI_COMPANION(&client->dev))
+		acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
+	device_unregister(&client->dev);
+}
+EXPORT_SYMBOL_GPL(i2c_unregister_device);
+
+
+static const struct i2c_device_id dummy_id[] = {
+	{ "dummy", 0 },
+	{ },
+};
+
+static int dummy_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	return 0;
+}
+
+static int dummy_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static struct i2c_driver dummy_driver = {
+	.driver.name	= "dummy",
+	.probe		= dummy_probe,
+	.remove		= dummy_remove,
+	.id_table	= dummy_id,
+};
+
+/**
+ * i2c_new_dummy - return a new i2c device bound to a dummy driver
+ * @adapter: the adapter managing the device
+ * @address: seven bit address to be used
+ * Context: can sleep
+ *
+ * This returns an I2C client bound to the "dummy" driver, intended for use
+ * with devices that consume multiple addresses.  Examples of such chips
+ * include various EEPROMS (like 24c04 and 24c08 models).
+ *
+ * These dummy devices have two main uses.  First, most I2C and SMBus calls
+ * except i2c_transfer() need a client handle; the dummy will be that handle.
+ * And second, this prevents the specified address from being bound to a
+ * different driver.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
+{
+	struct i2c_board_info info = {
+		I2C_BOARD_INFO("dummy", address),
+	};
+
+	return i2c_new_device(adapter, &info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_dummy);
+
+/**
+ * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * and create the associated device
+ * @client: Handle to the primary client
+ * @name: Handle to specify which secondary address to get
+ * @default_addr: Used as a fallback if no secondary address was specified
+ * Context: can sleep
+ *
+ * I2C clients can be composed of multiple I2C slaves bound together in a single
+ * component. The I2C client driver then binds to the master I2C slave and needs
+ * to create I2C dummy clients to communicate with all the other slaves.
+ *
+ * This function creates and returns an I2C dummy client whose I2C address is
+ * retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used.
+ *
+ * On DT-based platforms the address is retrieved from the "reg" property entry
+ * cell whose "reg-names" value matches the slave name.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+						const char *name,
+						u16 default_addr)
+{
+	struct device_node *np = client->dev.of_node;
+	u32 addr = default_addr;
+	int i;
+
+	if (np) {
+		i = of_property_match_string(np, "reg-names", name);
+		if (i >= 0)
+			of_property_read_u32_index(np, "reg", i, &addr);
+	}
+
+	dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
+	return i2c_new_dummy(client->adapter, addr);
+}
+EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+
+/* ------------------------------------------------------------------------- */
+
+/* I2C bus adapters -- one roots each I2C or SMBUS segment */
+
+static void i2c_adapter_dev_release(struct device *dev)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(dev);
+	complete(&adap->dev_released);
+}
+
+unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+{
+	unsigned int depth = 0;
+
+	while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
+		depth++;
+
+	WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
+		  "adapter depth exceeds lockdep subclass limit\n");
+
+	return depth;
+}
+EXPORT_SYMBOL_GPL(i2c_adapter_depth);
+
+/*
+ * Let users instantiate I2C devices through sysfs. This can be used when
+ * platform initialization code doesn't contain the proper data for
+ * whatever reason. Also useful for drivers that do device detection and
+ * detection fails, either because the device uses an unexpected address,
+ * or this is a compatible device with different ID register values.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to provide incorrect parameters.
+ */
+static ssize_t
+i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(dev);
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *blank, end;
+	int res;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+
+	blank = strchr(buf, ' ');
+	if (!blank) {
+		dev_err(dev, "%s: Missing parameters\n", "new_device");
+		return -EINVAL;
+	}
+	if (blank - buf > I2C_NAME_SIZE - 1) {
+		dev_err(dev, "%s: Invalid device name\n", "new_device");
+		return -EINVAL;
+	}
+	memcpy(info.type, buf, blank - buf);
+
+	/* Parse remaining parameters, reject extra parameters */
+	res = sscanf(++blank, "%hi%c", &info.addr, &end);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
+		return -EINVAL;
+	}
+	if (res > 1  && end != '\n') {
+		dev_err(dev, "%s: Extra parameters\n", "new_device");
+		return -EINVAL;
+	}
+
+	if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
+		info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
+		info.flags |= I2C_CLIENT_TEN;
+	}
+
+	if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
+		info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
+		info.flags |= I2C_CLIENT_SLAVE;
+	}
+
+	client = i2c_new_device(adap, &info);
+	if (!client)
+		return -EINVAL;
+
+	/* Keep track of the added device */
+	mutex_lock(&adap->userspace_clients_lock);
+	list_add_tail(&client->detected, &adap->userspace_clients);
+	mutex_unlock(&adap->userspace_clients_lock);
+	dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
+		 info.type, info.addr);
+
+	return count;
+}
+static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
+
+/*
+ * And of course let the users delete the devices they instantiated, if
+ * they got it wrong. This interface can only be used to delete devices
+ * instantiated by i2c_sysfs_new_device above. This guarantees that we
+ * don't delete devices to which some kernel code still has references.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to delete the wrong device.
+ */
+static ssize_t
+i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(dev);
+	struct i2c_client *client, *next;
+	unsigned short addr;
+	char end;
+	int res;
+
+	/* Parse parameters, reject extra parameters */
+	res = sscanf(buf, "%hi%c", &addr, &end);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
+		return -EINVAL;
+	}
+	if (res > 1  && end != '\n') {
+		dev_err(dev, "%s: Extra parameters\n", "delete_device");
+		return -EINVAL;
+	}
+
+	/* Make sure the device was added through sysfs */
+	res = -ENOENT;
+	mutex_lock_nested(&adap->userspace_clients_lock,
+			  i2c_adapter_depth(adap));
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		if (i2c_encode_flags_to_addr(client) == addr) {
+			dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
+				 "delete_device", client->name, client->addr);
+
+			list_del(&client->detected);
+			i2c_unregister_device(client);
+			res = count;
+			break;
+		}
+	}
+	mutex_unlock(&adap->userspace_clients_lock);
+
+	if (res < 0)
+		dev_err(dev, "%s: Can't find device in list\n",
+			"delete_device");
+	return res;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
+				   i2c_sysfs_delete_device);
+
+static struct attribute *i2c_adapter_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_new_device.attr,
+	&dev_attr_delete_device.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(i2c_adapter);
+
+struct device_type i2c_adapter_type = {
+	.groups		= i2c_adapter_groups,
+	.release	= i2c_adapter_dev_release,
+};
+EXPORT_SYMBOL_GPL(i2c_adapter_type);
+
+/**
+ * i2c_verify_adapter - return parameter as i2c_adapter or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find.  Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_adapter.
+ */
+struct i2c_adapter *i2c_verify_adapter(struct device *dev)
+{
+	return (dev->type == &i2c_adapter_type)
+			? to_i2c_adapter(dev)
+			: NULL;
+}
+EXPORT_SYMBOL(i2c_verify_adapter);
+
+#ifdef CONFIG_I2C_COMPAT
+static struct class_compat *i2c_adapter_compat_class;
+#endif
+
+static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
+{
+	struct i2c_devinfo	*devinfo;
+
+	down_read(&__i2c_board_lock);
+	list_for_each_entry(devinfo, &__i2c_board_list, list) {
+		if (devinfo->busnum == adapter->nr
+				&& !i2c_new_device(adapter,
+						&devinfo->board_info))
+			dev_err(&adapter->dev,
+				"Can't create device at 0x%02x\n",
+				devinfo->board_info.addr);
+	}
+	up_read(&__i2c_board_lock);
+}
+
+static int i2c_do_add_adapter(struct i2c_driver *driver,
+			      struct i2c_adapter *adap)
+{
+	/* Detect supported devices on that bus, and instantiate them */
+	i2c_detect(adap, driver);
+
+	/* Let legacy drivers scan this bus for matching devices */
+	if (driver->attach_adapter) {
+		dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
+			 driver->driver.name);
+		dev_warn(&adap->dev,
+			 "Please use another way to instantiate your i2c_client\n");
+		/* We ignore the return code; if it fails, too bad */
+		driver->attach_adapter(adap);
+	}
+	return 0;
+}
+
+static int __process_new_adapter(struct device_driver *d, void *data)
+{
+	return i2c_do_add_adapter(to_i2c_driver(d), data);
+}
+
+static const struct i2c_lock_operations i2c_adapter_lock_ops = {
+	.lock_bus =    i2c_adapter_lock_bus,
+	.trylock_bus = i2c_adapter_trylock_bus,
+	.unlock_bus =  i2c_adapter_unlock_bus,
+};
+
+static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
+{
+	struct irq_domain *domain = adap->host_notify_domain;
+	irq_hw_number_t hwirq;
+
+	if (!domain)
+		return;
+
+	for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
+		irq_dispose_mapping(irq_find_mapping(domain, hwirq));
+
+	irq_domain_remove(domain);
+	adap->host_notify_domain = NULL;
+}
+
+static int i2c_host_notify_irq_map(struct irq_domain *h,
+					  unsigned int virq,
+					  irq_hw_number_t hw_irq_num)
+{
+	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops i2c_host_notify_irq_ops = {
+	.map = i2c_host_notify_irq_map,
+};
+
+static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
+{
+	struct irq_domain *domain;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
+		return 0;
+
+	domain = irq_domain_create_linear(adap->dev.fwnode,
+					  I2C_ADDR_7BITS_COUNT,
+					  &i2c_host_notify_irq_ops, adap);
+	if (!domain)
+		return -ENOMEM;
+
+	adap->host_notify_domain = domain;
+
+	return 0;
+}
+
+/**
+ * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
+ * I2C client.
+ * @adap: the adapter
+ * @addr: the I2C address of the notifying device
+ * Context: can't sleep
+ *
+ * Helper function to be called from an I2C bus driver's interrupt
+ * handler. It will schedule the Host Notify IRQ.
+ */
+int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
+{
+	int irq;
+
+	if (!adap)
+		return -EINVAL;
+
+	irq = irq_find_mapping(adap->host_notify_domain, addr);
+	if (irq <= 0)
+		return -ENXIO;
+
+	generic_handle_irq(irq);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
+
+static int i2c_register_adapter(struct i2c_adapter *adap)
+{
+	int res = -EINVAL;
+
+	/* Can't register until after driver model init */
+	if (WARN_ON(!is_registered)) {
+		res = -EAGAIN;
+		goto out_list;
+	}
+
+	/* Sanity checks */
+	if (WARN(!adap->name[0], "i2c adapter has no name"))
+		goto out_list;
+
+	if (!adap->algo) {
+		pr_err("adapter '%s': no algo supplied!\n", adap->name);
+		goto out_list;
+	}
+
+	if (!adap->lock_ops)
+		adap->lock_ops = &i2c_adapter_lock_ops;
+
+	rt_mutex_init(&adap->bus_lock);
+	rt_mutex_init(&adap->mux_lock);
+	mutex_init(&adap->userspace_clients_lock);
+	INIT_LIST_HEAD(&adap->userspace_clients);
+
+	/* Set default timeout to 1 second if not already set */
+	if (adap->timeout == 0)
+		adap->timeout = HZ;
+
+	/* register soft irqs for Host Notify */
+	res = i2c_setup_host_notify_irq_domain(adap);
+	if (res) {
+		pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
+		       adap->name, res);
+		goto out_list;
+	}
+
+	dev_set_name(&adap->dev, "i2c-%d", adap->nr);
+	adap->dev.bus = &i2c_bus_type;
+	adap->dev.type = &i2c_adapter_type;
+	res = device_register(&adap->dev);
+	if (res) {
+		pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
+		goto out_list;
+	}
+
+	dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
+	pm_runtime_no_callbacks(&adap->dev);
+	pm_suspend_ignore_children(&adap->dev, true);
+	pm_runtime_enable(&adap->dev);
+
+#ifdef CONFIG_I2C_COMPAT
+	res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
+				       adap->dev.parent);
+	if (res)
+		dev_warn(&adap->dev,
+			 "Failed to create compatibility class link\n");
+#endif
+
+	i2c_init_recovery(adap);
+
+	/* create pre-declared device nodes */
+	of_i2c_register_devices(adap);
+	i2c_acpi_install_space_handler(adap);
+	i2c_acpi_register_devices(adap);
+
+	if (adap->nr < __i2c_first_dynamic_bus_num)
+		i2c_scan_static_board_info(adap);
+
+	/* Notify drivers */
+	mutex_lock(&core_lock);
+	bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
+	mutex_unlock(&core_lock);
+
+	return 0;
+
+out_list:
+	mutex_lock(&core_lock);
+	idr_remove(&i2c_adapter_idr, adap->nr);
+	mutex_unlock(&core_lock);
+	return res;
+}
+
+/**
+ * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
+ * @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
+ *
+ * See i2c_add_numbered_adapter() for details.
+ */
+static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
+{
+	int id;
+
+	mutex_lock(&core_lock);
+	id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
+	mutex_unlock(&core_lock);
+	if (WARN(id < 0, "couldn't get idr"))
+		return id == -ENOSPC ? -EBUSY : id;
+
+	return i2c_register_adapter(adap);
+}
+
+/**
+ * i2c_add_adapter - declare i2c adapter, use dynamic bus number
+ * @adapter: the adapter to add
+ * Context: can sleep
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * doesn't matter or when its bus number is specified by an dt alias.
+ * Examples of bases when the bus number doesn't matter: I2C adapters
+ * dynamically added by USB links or PCI plugin cards.
+ *
+ * When this returns zero, a new bus number was allocated and stored
+ * in adap->nr, and the specified adapter became available for clients.
+ * Otherwise, a negative errno value is returned.
+ */
+int i2c_add_adapter(struct i2c_adapter *adapter)
+{
+	struct device *dev = &adapter->dev;
+	int id;
+
+	if (dev->of_node) {
+		id = of_alias_get_id(dev->of_node, "i2c");
+		if (id >= 0) {
+			adapter->nr = id;
+			return __i2c_add_numbered_adapter(adapter);
+		}
+	}
+
+	mutex_lock(&core_lock);
+	id = idr_alloc(&i2c_adapter_idr, adapter,
+		       __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
+	mutex_unlock(&core_lock);
+	if (WARN(id < 0, "couldn't get idr"))
+		return id;
+
+	adapter->nr = id;
+
+	return i2c_register_adapter(adapter);
+}
+EXPORT_SYMBOL(i2c_add_adapter);
+
+/**
+ * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
+ * @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * matters.  For example, use it for I2C adapters from system-on-chip CPUs,
+ * or otherwise built in to the system's mainboard, and where i2c_board_info
+ * is used to properly configure I2C devices.
+ *
+ * If the requested bus number is set to -1, then this function will behave
+ * identically to i2c_add_adapter, and will dynamically assign a bus number.
+ *
+ * If no devices have pre-been declared for this bus, then be sure to
+ * register the adapter before any dynamically allocated ones.  Otherwise
+ * the required bus ID may not be available.
+ *
+ * When this returns zero, the specified adapter became available for
+ * clients using the bus number provided in adap->nr.  Also, the table
+ * of I2C devices pre-declared using i2c_register_board_info() is scanned,
+ * and the appropriate driver model device nodes are created.  Otherwise, a
+ * negative errno value is returned.
+ */
+int i2c_add_numbered_adapter(struct i2c_adapter *adap)
+{
+	if (adap->nr == -1) /* -1 means dynamically assign bus id */
+		return i2c_add_adapter(adap);
+
+	return __i2c_add_numbered_adapter(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
+
+static void i2c_do_del_adapter(struct i2c_driver *driver,
+			      struct i2c_adapter *adapter)
+{
+	struct i2c_client *client, *_n;
+
+	/* Remove the devices we created ourselves as the result of hardware
+	 * probing (using a driver's detect method) */
+	list_for_each_entry_safe(client, _n, &driver->clients, detected) {
+		if (client->adapter == adapter) {
+			dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
+				client->name, client->addr);
+			list_del(&client->detected);
+			i2c_unregister_device(client);
+		}
+	}
+}
+
+static int __unregister_client(struct device *dev, void *dummy)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	if (client && strcmp(client->name, "dummy"))
+		i2c_unregister_device(client);
+	return 0;
+}
+
+static int __unregister_dummy(struct device *dev, void *dummy)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	if (client)
+		i2c_unregister_device(client);
+	return 0;
+}
+
+static int __process_removed_adapter(struct device_driver *d, void *data)
+{
+	i2c_do_del_adapter(to_i2c_driver(d), data);
+	return 0;
+}
+
+/**
+ * i2c_del_adapter - unregister I2C adapter
+ * @adap: the adapter being unregistered
+ * Context: can sleep
+ *
+ * This unregisters an I2C adapter which was previously registered
+ * by @i2c_add_adapter or @i2c_add_numbered_adapter.
+ */
+void i2c_del_adapter(struct i2c_adapter *adap)
+{
+	struct i2c_adapter *found;
+	struct i2c_client *client, *next;
+
+	/* First make sure that this adapter was ever added */
+	mutex_lock(&core_lock);
+	found = idr_find(&i2c_adapter_idr, adap->nr);
+	mutex_unlock(&core_lock);
+	if (found != adap) {
+		pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
+		return;
+	}
+
+	i2c_acpi_remove_space_handler(adap);
+	/* Tell drivers about this removal */
+	mutex_lock(&core_lock);
+	bus_for_each_drv(&i2c_bus_type, NULL, adap,
+			       __process_removed_adapter);
+	mutex_unlock(&core_lock);
+
+	/* Remove devices instantiated from sysfs */
+	mutex_lock_nested(&adap->userspace_clients_lock,
+			  i2c_adapter_depth(adap));
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+			client->addr);
+		list_del(&client->detected);
+		i2c_unregister_device(client);
+	}
+	mutex_unlock(&adap->userspace_clients_lock);
+
+	/* Detach any active clients. This can't fail, thus we do not
+	 * check the returned value. This is a two-pass process, because
+	 * we can't remove the dummy devices during the first pass: they
+	 * could have been instantiated by real devices wishing to clean
+	 * them up properly, so we give them a chance to do that first. */
+	device_for_each_child(&adap->dev, NULL, __unregister_client);
+	device_for_each_child(&adap->dev, NULL, __unregister_dummy);
+
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
+				 adap->dev.parent);
+#endif
+
+	/* device name is gone after device_unregister */
+	dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
+	pm_runtime_disable(&adap->dev);
+
+	i2c_host_notify_irq_teardown(adap);
+
+	/* wait until all references to the device are gone
+	 *
+	 * FIXME: This is old code and should ideally be replaced by an
+	 * alternative which results in decoupling the lifetime of the struct
+	 * device from the i2c_adapter, like spi or netdev do. Any solution
+	 * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
+	 */
+	init_completion(&adap->dev_released);
+	device_unregister(&adap->dev);
+	wait_for_completion(&adap->dev_released);
+
+	/* free bus id */
+	mutex_lock(&core_lock);
+	idr_remove(&i2c_adapter_idr, adap->nr);
+	mutex_unlock(&core_lock);
+
+	/* Clear the device structure in case this adapter is ever going to be
+	   added again */
+	memset(&adap->dev, 0, sizeof(adap->dev));
+}
+EXPORT_SYMBOL(i2c_del_adapter);
+
+/**
+ * i2c_parse_fw_timings - get I2C related timing parameters from firmware
+ * @dev: The device to scan for I2C timing properties
+ * @t: the i2c_timings struct to be filled with values
+ * @use_defaults: bool to use sane defaults derived from the I2C specification
+ *		  when properties are not found, otherwise use 0
+ *
+ * Scan the device for the generic I2C properties describing timing parameters
+ * for the signal and fill the given struct with the results. If a property was
+ * not found and use_defaults was true, then maximum timings are assumed which
+ * are derived from the I2C specification. If use_defaults is not used, the
+ * results will be 0, so drivers can apply their own defaults later. The latter
+ * is mainly intended for avoiding regressions of existing drivers which want
+ * to switch to this function. New drivers almost always should use the defaults.
+ */
+
+void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
+{
+	int ret;
+
+	memset(t, 0, sizeof(*t));
+
+	ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
+	if (ret && use_defaults)
+		t->bus_freq_hz = 100000;
+
+	ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
+	if (ret && use_defaults) {
+		if (t->bus_freq_hz <= 100000)
+			t->scl_rise_ns = 1000;
+		else if (t->bus_freq_hz <= 400000)
+			t->scl_rise_ns = 300;
+		else
+			t->scl_rise_ns = 120;
+	}
+
+	ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
+	if (ret && use_defaults) {
+		if (t->bus_freq_hz <= 400000)
+			t->scl_fall_ns = 300;
+		else
+			t->scl_fall_ns = 120;
+	}
+
+	device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
+
+	ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
+	if (ret && use_defaults)
+		t->sda_fall_ns = t->scl_fall_ns;
+}
+EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
+
+/* ------------------------------------------------------------------------- */
+
+int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
+{
+	int res;
+
+	mutex_lock(&core_lock);
+	res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
+	mutex_unlock(&core_lock);
+
+	return res;
+}
+EXPORT_SYMBOL_GPL(i2c_for_each_dev);
+
+static int __process_new_driver(struct device *dev, void *data)
+{
+	if (dev->type != &i2c_adapter_type)
+		return 0;
+	return i2c_do_add_adapter(data, to_i2c_adapter(dev));
+}
+
+/*
+ * An i2c_driver is used with one or more i2c_client (device) nodes to access
+ * i2c slave chips, on a bus instance associated with some i2c_adapter.
+ */
+
+int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
+{
+	int res;
+
+	/* Can't register until after driver model init */
+	if (WARN_ON(!is_registered))
+		return -EAGAIN;
+
+	/* add the driver to the list of i2c drivers in the driver core */
+	driver->driver.owner = owner;
+	driver->driver.bus = &i2c_bus_type;
+	INIT_LIST_HEAD(&driver->clients);
+
+	/* When registration returns, the driver core
+	 * will have called probe() for all matching-but-unbound devices.
+	 */
+	res = driver_register(&driver->driver);
+	if (res)
+		return res;
+
+	pr_debug("driver [%s] registered\n", driver->driver.name);
+
+	/* Walk the adapters that are already present */
+	i2c_for_each_dev(driver, __process_new_driver);
+
+	return 0;
+}
+EXPORT_SYMBOL(i2c_register_driver);
+
+static int __process_removed_driver(struct device *dev, void *data)
+{
+	if (dev->type == &i2c_adapter_type)
+		i2c_do_del_adapter(data, to_i2c_adapter(dev));
+	return 0;
+}
+
+/**
+ * i2c_del_driver - unregister I2C driver
+ * @driver: the driver being unregistered
+ * Context: can sleep
+ */
+void i2c_del_driver(struct i2c_driver *driver)
+{
+	i2c_for_each_dev(driver, __process_removed_driver);
+
+	driver_unregister(&driver->driver);
+	pr_debug("driver [%s] unregistered\n", driver->driver.name);
+}
+EXPORT_SYMBOL(i2c_del_driver);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * i2c_use_client - increments the reference count of the i2c client structure
+ * @client: the client being referenced
+ *
+ * Each live reference to a client should be refcounted. The driver model does
+ * that automatically as part of driver binding, so that most drivers don't
+ * need to do this explicitly: they hold a reference until they're unbound
+ * from the device.
+ *
+ * A pointer to the client with the incremented reference counter is returned.
+ */
+struct i2c_client *i2c_use_client(struct i2c_client *client)
+{
+	if (client && get_device(&client->dev))
+		return client;
+	return NULL;
+}
+EXPORT_SYMBOL(i2c_use_client);
+
+/**
+ * i2c_release_client - release a use of the i2c client structure
+ * @client: the client being no longer referenced
+ *
+ * Must be called when a user of a client is finished with it.
+ */
+void i2c_release_client(struct i2c_client *client)
+{
+	if (client)
+		put_device(&client->dev);
+}
+EXPORT_SYMBOL(i2c_release_client);
+
+struct i2c_cmd_arg {
+	unsigned	cmd;
+	void		*arg;
+};
+
+static int i2c_cmd(struct device *dev, void *_arg)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_cmd_arg	*arg = _arg;
+	struct i2c_driver	*driver;
+
+	if (!client || !client->dev.driver)
+		return 0;
+
+	driver = to_i2c_driver(client->dev.driver);
+	if (driver->command)
+		driver->command(client, arg->cmd, arg->arg);
+	return 0;
+}
+
+void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
+{
+	struct i2c_cmd_arg	cmd_arg;
+
+	cmd_arg.cmd = cmd;
+	cmd_arg.arg = arg;
+	device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
+}
+EXPORT_SYMBOL(i2c_clients_command);
+
+static int __init i2c_init(void)
+{
+	int retval;
+
+	retval = of_alias_get_highest_id("i2c");
+
+	down_write(&__i2c_board_lock);
+	if (retval >= __i2c_first_dynamic_bus_num)
+		__i2c_first_dynamic_bus_num = retval + 1;
+	up_write(&__i2c_board_lock);
+
+	retval = bus_register(&i2c_bus_type);
+	if (retval)
+		return retval;
+
+	is_registered = true;
+
+#ifdef CONFIG_I2C_COMPAT
+	i2c_adapter_compat_class = class_compat_register("i2c-adapter");
+	if (!i2c_adapter_compat_class) {
+		retval = -ENOMEM;
+		goto bus_err;
+	}
+#endif
+	retval = i2c_add_driver(&dummy_driver);
+	if (retval)
+		goto class_err;
+
+	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+		WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
+	if (IS_ENABLED(CONFIG_ACPI))
+		WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
+
+	return 0;
+
+class_err:
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_unregister(i2c_adapter_compat_class);
+bus_err:
+#endif
+	is_registered = false;
+	bus_unregister(&i2c_bus_type);
+	return retval;
+}
+
+static void __exit i2c_exit(void)
+{
+	if (IS_ENABLED(CONFIG_ACPI))
+		WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
+	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+		WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
+	i2c_del_driver(&dummy_driver);
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_unregister(i2c_adapter_compat_class);
+#endif
+	bus_unregister(&i2c_bus_type);
+	tracepoint_synchronize_unregister();
+}
+
+/* We must initialize early, because some subsystems register i2c drivers
+ * in subsys_initcall() code, but are linked (and initialized) before i2c.
+ */
+postcore_initcall(i2c_init);
+module_exit(i2c_exit);
+
+/* ----------------------------------------------------
+ * the functional interface to the i2c busses.
+ * ----------------------------------------------------
+ */
+
+/* Check if val is exceeding the quirk IFF quirk is non 0 */
+#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
+
+static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
+{
+	dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
+			    err_msg, msg->addr, msg->len,
+			    msg->flags & I2C_M_RD ? "read" : "write");
+	return -EOPNOTSUPP;
+}
+
+static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	const struct i2c_adapter_quirks *q = adap->quirks;
+	int max_num = q->max_num_msgs, i;
+	bool do_len_check = true;
+
+	if (q->flags & I2C_AQ_COMB) {
+		max_num = 2;
+
+		/* special checks for combined messages */
+		if (num == 2) {
+			if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
+				return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
+
+			if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
+				return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
+
+			if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
+				return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
+
+			if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
+				return i2c_quirk_error(adap, &msgs[0], "msg too long");
+
+			if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
+				return i2c_quirk_error(adap, &msgs[1], "msg too long");
+
+			do_len_check = false;
+		}
+	}
+
+	if (i2c_quirk_exceeded(num, max_num))
+		return i2c_quirk_error(adap, &msgs[0], "too many messages");
+
+	for (i = 0; i < num; i++) {
+		u16 len = msgs[i].len;
+
+		if (msgs[i].flags & I2C_M_RD) {
+			if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
+				return i2c_quirk_error(adap, &msgs[i], "msg too long");
+		} else {
+			if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
+				return i2c_quirk_error(adap, &msgs[i], "msg too long");
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * __i2c_transfer - unlocked flavor of i2c_transfer
+ * @adap: Handle to I2C bus
+ * @msgs: One or more messages to execute before STOP is issued to
+ *	terminate the operation; each message begins with a START.
+ * @num: Number of messages to be executed.
+ *
+ * Returns negative errno, else the number of messages executed.
+ *
+ * Adapter lock must be held when calling this function. No debug logging
+ * takes place. adap->algo->master_xfer existence isn't checked.
+ */
+int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	unsigned long orig_jiffies;
+	int ret, try;
+
+	if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
+		return -EOPNOTSUPP;
+
+	/* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
+	 * enabled.  This is an efficient way of keeping the for-loop from
+	 * being executed when not needed.
+	 */
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < num; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_read(adap, &msgs[i], i);
+			else
+				trace_i2c_write(adap, &msgs[i], i);
+	}
+
+	/* Retry automatically on arbitration loss */
+	orig_jiffies = jiffies;
+	for (ret = 0, try = 0; try <= adap->retries; try++) {
+		ret = adap->algo->master_xfer(adap, msgs, num);
+		if (ret != -EAGAIN)
+			break;
+		if (time_after(jiffies, orig_jiffies + adap->timeout))
+			break;
+	}
+
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < ret; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_reply(adap, &msgs[i], i);
+		trace_i2c_result(adap, i, ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(__i2c_transfer);
+
+/**
+ * i2c_transfer - execute a single or combined I2C message
+ * @adap: Handle to I2C bus
+ * @msgs: One or more messages to execute before STOP is issued to
+ *	terminate the operation; each message begins with a START.
+ * @num: Number of messages to be executed.
+ *
+ * Returns negative errno, else the number of messages executed.
+ *
+ * Note that there is no requirement that each message be sent to
+ * the same slave address, although that is the most common model.
+ */
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	int ret;
+
+	/* REVISIT the fault reporting model here is weak:
+	 *
+	 *  - When we get an error after receiving N bytes from a slave,
+	 *    there is no way to report "N".
+	 *
+	 *  - When we get a NAK after transmitting N bytes to a slave,
+	 *    there is no way to report "N" ... or to let the master
+	 *    continue executing the rest of this combined message, if
+	 *    that's the appropriate response.
+	 *
+	 *  - When for example "num" is two and we successfully complete
+	 *    the first message but get an error part way through the
+	 *    second, it's unclear whether that should be reported as
+	 *    one (discarding status on the second message) or errno
+	 *    (discarding status on the first one).
+	 */
+
+	if (adap->algo->master_xfer) {
+#ifdef DEBUG
+		for (ret = 0; ret < num; ret++) {
+			dev_dbg(&adap->dev,
+				"master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
+				ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
+				msgs[ret].addr, msgs[ret].len,
+				(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
+		}
+#endif
+
+		if (in_atomic() || irqs_disabled()) {
+			ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
+			if (!ret)
+				/* I2C activity is ongoing. */
+				return -EAGAIN;
+		} else {
+			i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
+		}
+
+		ret = __i2c_transfer(adap, msgs, num);
+		i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
+
+		return ret;
+	} else {
+		dev_dbg(&adap->dev, "I2C level transfers not supported\n");
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL(i2c_transfer);
+
+/**
+ * i2c_master_send - issue a single I2C message in master transmit mode
+ * @client: Handle to slave device
+ * @buf: Data that will be written to the slave
+ * @count: How many bytes to write, must be less than 64k since msg.len is u16
+ *
+ * Returns negative errno, or else the number of bytes written.
+ */
+int i2c_master_send(const struct i2c_client *client, const char *buf, int count)
+{
+	int ret;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg;
+
+	msg.addr = client->addr;
+	msg.flags = client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (char *)buf;
+
+	ret = i2c_transfer(adap, &msg, 1);
+
+	/*
+	 * If everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
+	return (ret == 1) ? count : ret;
+}
+EXPORT_SYMBOL(i2c_master_send);
+
+/**
+ * i2c_master_recv - issue a single I2C message in master receive mode
+ * @client: Handle to slave device
+ * @buf: Where to store data read from slave
+ * @count: How many bytes to read, must be less than 64k since msg.len is u16
+ *
+ * Returns negative errno, or else the number of bytes read.
+ */
+int i2c_master_recv(const struct i2c_client *client, char *buf, int count)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg;
+	int ret;
+
+	msg.addr = client->addr;
+	msg.flags = client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = buf;
+
+	ret = i2c_transfer(adap, &msg, 1);
+
+	/*
+	 * If everything went ok (i.e. 1 msg received), return #bytes received,
+	 * else error code.
+	 */
+	return (ret == 1) ? count : ret;
+}
+EXPORT_SYMBOL(i2c_master_recv);
+
+/* ----------------------------------------------------
+ * the i2c address scanning function
+ * Will not work for 10-bit addresses!
+ * ----------------------------------------------------
+ */
+
+/*
+ * Legacy default probe function, mostly relevant for SMBus. The default
+ * probe method is a quick write, but it is known to corrupt the 24RF08
+ * EEPROMs due to a state machine bug, and could also irreversibly
+ * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
+ * we use a short byte read instead. Also, some bus drivers don't implement
+ * quick write, so we fallback to a byte read in that case too.
+ * On x86, there is another special case for FSC hardware monitoring chips,
+ * which want regular byte reads (address 0x73.) Fortunately, these are the
+ * only known chips using this I2C address on PC hardware.
+ * Returns 1 if probe succeeded, 0 if not.
+ */
+static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
+{
+	int err;
+	union i2c_smbus_data dummy;
+
+#ifdef CONFIG_X86
+	if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
+	 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE_DATA, &dummy);
+	else
+#endif
+	if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
+	 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
+				     I2C_SMBUS_QUICK, NULL);
+	else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE, &dummy);
+	else {
+		dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
+			 addr);
+		err = -EOPNOTSUPP;
+	}
+
+	return err >= 0;
+}
+
+static int i2c_detect_address(struct i2c_client *temp_client,
+			      struct i2c_driver *driver)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter = temp_client->adapter;
+	int addr = temp_client->addr;
+	int err;
+
+	/* Make sure the address is valid */
+	err = i2c_check_7bit_addr_validity_strict(addr);
+	if (err) {
+		dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+			 addr);
+		return err;
+	}
+
+	/* Skip if already in use (7 bit, no need to encode flags) */
+	if (i2c_check_addr_busy(adapter, addr))
+		return 0;
+
+	/* Make sure there is something at this address */
+	if (!i2c_default_probe(adapter, addr))
+		return 0;
+
+	/* Finally call the custom detection function */
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = addr;
+	err = driver->detect(temp_client, &info);
+	if (err) {
+		/* -ENODEV is returned if the detection fails. We catch it
+		   here as this isn't an error. */
+		return err == -ENODEV ? 0 : err;
+	}
+
+	/* Consistency check */
+	if (info.type[0] == '\0') {
+		dev_err(&adapter->dev,
+			"%s detection function provided no name for 0x%x\n",
+			driver->driver.name, addr);
+	} else {
+		struct i2c_client *client;
+
+		/* Detection succeeded, instantiate the device */
+		if (adapter->class & I2C_CLASS_DEPRECATED)
+			dev_warn(&adapter->dev,
+				"This adapter will soon drop class based instantiation of devices. "
+				"Please make sure client 0x%02x gets instantiated by other means. "
+				"Check 'Documentation/i2c/instantiating-devices' for details.\n",
+				info.addr);
+
+		dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
+			info.type, info.addr);
+		client = i2c_new_device(adapter, &info);
+		if (client)
+			list_add_tail(&client->detected, &driver->clients);
+		else
+			dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
+				info.type, info.addr);
+	}
+	return 0;
+}
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
+{
+	const unsigned short *address_list;
+	struct i2c_client *temp_client;
+	int i, err = 0;
+	int adap_id = i2c_adapter_id(adapter);
+
+	address_list = driver->address_list;
+	if (!driver->detect || !address_list)
+		return 0;
+
+	/* Warn that the adapter lost class based instantiation */
+	if (adapter->class == I2C_CLASS_DEPRECATED) {
+		dev_dbg(&adapter->dev,
+			"This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
+			"If you need it, check 'Documentation/i2c/instantiating-devices' for alternatives.\n",
+			driver->driver.name);
+		return 0;
+	}
+
+	/* Stop here if the classes do not match */
+	if (!(adapter->class & driver->class))
+		return 0;
+
+	/* Set up a temporary client to help detect callback */
+	temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!temp_client)
+		return -ENOMEM;
+	temp_client->adapter = adapter;
+
+	for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
+		dev_dbg(&adapter->dev,
+			"found normal entry for adapter %d, addr 0x%02x\n",
+			adap_id, address_list[i]);
+		temp_client->addr = address_list[i];
+		err = i2c_detect_address(temp_client, driver);
+		if (unlikely(err))
+			break;
+	}
+
+	kfree(temp_client);
+	return err;
+}
+
+int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
+{
+	return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+			      I2C_SMBUS_QUICK, NULL) >= 0;
+}
+EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
+
+struct i2c_client *
+i2c_new_probed_device(struct i2c_adapter *adap,
+		      struct i2c_board_info *info,
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *, unsigned short addr))
+{
+	int i;
+
+	if (!probe)
+		probe = i2c_default_probe;
+
+	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
+		/* Check address validity */
+		if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
+			dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
+				 addr_list[i]);
+			continue;
+		}
+
+		/* Check address availability (7 bit, no need to encode flags) */
+		if (i2c_check_addr_busy(adap, addr_list[i])) {
+			dev_dbg(&adap->dev,
+				"Address 0x%02x already in use, not probing\n",
+				addr_list[i]);
+			continue;
+		}
+
+		/* Test address responsiveness */
+		if (probe(adap, addr_list[i]))
+			break;
+	}
+
+	if (addr_list[i] == I2C_CLIENT_END) {
+		dev_dbg(&adap->dev, "Probing failed, no device found\n");
+		return NULL;
+	}
+
+	info->addr = addr_list[i];
+	return i2c_new_device(adap, info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_probed_device);
+
+struct i2c_adapter *i2c_get_adapter(int nr)
+{
+	struct i2c_adapter *adapter;
+
+	mutex_lock(&core_lock);
+	adapter = idr_find(&i2c_adapter_idr, nr);
+	if (!adapter)
+		goto exit;
+
+	if (try_module_get(adapter->owner))
+		get_device(&adapter->dev);
+	else
+		adapter = NULL;
+
+ exit:
+	mutex_unlock(&core_lock);
+	return adapter;
+}
+EXPORT_SYMBOL(i2c_get_adapter);
+
+void i2c_put_adapter(struct i2c_adapter *adap)
+{
+	if (!adap)
+		return;
+
+	put_device(&adap->dev);
+	module_put(adap->owner);
+}
+EXPORT_SYMBOL(i2c_put_adapter);
+
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C-Bus main module");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core-of.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-of.c
new file mode 100644
index 0000000..17d727e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-of.c
@@ -0,0 +1,274 @@
+/*
+ * Linux I2C core OF support code
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ * based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Copyright (C) 2013 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "i2c-core.h"
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+						 struct device_node *node)
+{
+	struct i2c_client *result;
+	struct i2c_board_info info = {};
+	struct dev_archdata dev_ad = {};
+	const __be32 *addr_be;
+	u32 addr;
+	int len;
+
+	dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+
+	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+		dev_err(&adap->dev, "of_i2c: modalias failure on %pOF\n",
+			node);
+		return ERR_PTR(-EINVAL);
+	}
+
+	addr_be = of_get_property(node, "reg", &len);
+	if (!addr_be || (len < sizeof(*addr_be))) {
+		dev_err(&adap->dev, "of_i2c: invalid reg on %pOF\n", node);
+		return ERR_PTR(-EINVAL);
+	}
+
+	addr = be32_to_cpup(addr_be);
+	if (addr & I2C_TEN_BIT_ADDRESS) {
+		addr &= ~I2C_TEN_BIT_ADDRESS;
+		info.flags |= I2C_CLIENT_TEN;
+	}
+
+	if (addr & I2C_OWN_SLAVE_ADDRESS) {
+		addr &= ~I2C_OWN_SLAVE_ADDRESS;
+		info.flags |= I2C_CLIENT_SLAVE;
+	}
+
+	if (i2c_check_addr_validity(addr, info.flags)) {
+		dev_err(&adap->dev, "of_i2c: invalid addr=%x on %pOF\n",
+			addr, node);
+		return ERR_PTR(-EINVAL);
+	}
+
+	info.addr = addr;
+	info.of_node = of_node_get(node);
+	info.archdata = &dev_ad;
+
+	if (of_property_read_bool(node, "host-notify"))
+		info.flags |= I2C_CLIENT_HOST_NOTIFY;
+
+	if (of_get_property(node, "wakeup-source", NULL))
+		info.flags |= I2C_CLIENT_WAKE;
+
+	result = i2c_new_device(adap, &info);
+	if (result == NULL) {
+		dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
+		of_node_put(node);
+		return ERR_PTR(-EINVAL);
+	}
+	return result;
+}
+
+void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	struct device_node *bus, *node;
+	struct i2c_client *client;
+
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
+	if (!bus)
+		bus = of_node_get(adap->dev.of_node);
+
+	for_each_available_child_of_node(bus, node) {
+		if (of_node_test_and_set_flag(node, OF_POPULATED))
+			continue;
+
+		client = of_i2c_register_device(adap, node);
+		if (IS_ERR(client)) {
+			dev_warn(&adap->dev,
+				 "Failed to create I2C device for %pOF\n",
+				 node);
+			of_node_clear_flag(node, OF_POPULATED);
+		}
+	}
+
+	of_node_put(bus);
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+	struct i2c_client *client;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	client = i2c_verify_client(dev);
+	if (!client)
+		put_device(dev);
+
+	return client;
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	struct device *dev;
+	struct i2c_adapter *adapter;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	adapter = i2c_verify_adapter(dev);
+	if (!adapter)
+		put_device(dev);
+
+	return adapter;
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
+/* must call i2c_put_adapter() when done with returned i2c_adapter device */
+struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
+{
+	struct i2c_adapter *adapter;
+
+	adapter = of_find_i2c_adapter_by_node(node);
+	if (!adapter)
+		return NULL;
+
+	if (!try_module_get(adapter->owner)) {
+		put_device(&adapter->dev);
+		adapter = NULL;
+	}
+
+	return adapter;
+}
+EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
+
+static const struct of_device_id*
+i2c_of_match_device_sysfs(const struct of_device_id *matches,
+				  struct i2c_client *client)
+{
+	const char *name;
+
+	for (; matches->compatible[0]; matches++) {
+		/*
+		 * Adding devices through the i2c sysfs interface provides us
+		 * a string to match which may be compatible with the device
+		 * tree compatible strings, however with no actual of_node the
+		 * of_match_device() will not match
+		 */
+		if (sysfs_streq(client->name, matches->compatible))
+			return matches;
+
+		name = strchr(matches->compatible, ',');
+		if (!name)
+			name = matches->compatible;
+		else
+			name++;
+
+		if (sysfs_streq(client->name, name))
+			return matches;
+	}
+
+	return NULL;
+}
+
+const struct of_device_id
+*i2c_of_match_device(const struct of_device_id *matches,
+		     struct i2c_client *client)
+{
+	const struct of_device_id *match;
+
+	if (!(client && matches))
+		return NULL;
+
+	match = of_match_device(matches, &client->dev);
+	if (match)
+		return match;
+
+	return i2c_of_match_device_sysfs(matches, client);
+}
+EXPORT_SYMBOL_GPL(i2c_of_match_device);
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
+			 void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	switch (of_reconfig_get_state_change(action, rd)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		adap = of_find_i2c_adapter_by_node(rd->dn->parent);
+		if (adap == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+			put_device(&adap->dev);
+			return NOTIFY_OK;
+		}
+
+		client = of_i2c_register_device(adap, rd->dn);
+		if (IS_ERR(client)) {
+			dev_err(&adap->dev, "failed to create client for '%pOF'\n",
+				 rd->dn);
+			put_device(&adap->dev);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(PTR_ERR(client));
+		}
+		put_device(&adap->dev);
+		break;
+	case OF_RECONFIG_CHANGE_REMOVE:
+		/* already depopulated? */
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		/* find our device by node */
+		client = of_find_i2c_device_by_node(rd->dn);
+		if (client == NULL)
+			return NOTIFY_OK;	/* no? not meant for us */
+
+		/* unregister takes one ref away */
+		i2c_unregister_device(client);
+
+		/* and put the reference of the find */
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block i2c_of_notifier = {
+	.notifier_call = of_i2c_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core-slave.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-slave.c
new file mode 100644
index 0000000..d89bc31
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-slave.c
@@ -0,0 +1,116 @@
+/*
+ * Linux I2C core slave support code
+ *
+ * Copyright (C) 2014 by Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include "i2c-core.h"
+
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
+{
+	int ret;
+
+	if (WARN(IS_ERR_OR_NULL(client) || !slave_cb, "insufficient data\n"))
+		return -EINVAL;
+
+	if (!(client->flags & I2C_CLIENT_SLAVE))
+		dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
+			 __func__);
+
+	if (!(client->flags & I2C_CLIENT_TEN)) {
+		/* Enforce stricter address checking */
+		ret = i2c_check_7bit_addr_validity_strict(client->addr);
+		if (ret) {
+			dev_err(&client->dev, "%s: invalid address\n", __func__);
+			return ret;
+		}
+	}
+
+	if (!client->adapter->algo->reg_slave) {
+		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	client->slave_cb = slave_cb;
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->reg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret) {
+		client->slave_cb = NULL;
+		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_register);
+
+int i2c_slave_unregister(struct i2c_client *client)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(client))
+		return -EINVAL;
+
+	if (!client->adapter->algo->unreg_slave) {
+		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->unreg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret == 0)
+		client->slave_cb = NULL;
+	else
+		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+
+/**
+ * i2c_detect_slave_mode - detect operation mode
+ * @dev: The device owning the bus
+ *
+ * This checks the device nodes for an I2C slave by checking the address
+ * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
+ * flag this means the device is configured to act as a I2C slave and it will
+ * be listening at that address.
+ *
+ * Returns true if an I2C own slave address is detected, otherwise returns
+ * false.
+ */
+bool i2c_detect_slave_mode(struct device *dev)
+{
+	if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
+		struct device_node *child;
+		u32 reg;
+
+		for_each_child_of_node(dev->of_node, child) {
+			of_property_read_u32(child, "reg", &reg);
+			if (reg & I2C_OWN_SLAVE_ADDRESS) {
+				of_node_put(child);
+				return true;
+			}
+		}
+	} else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
+		dev_dbg(dev, "ACPI slave is not supported yet\n");
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core-smbus.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-smbus.c
new file mode 100644
index 0000000..e54a9b8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core-smbus.c
@@ -0,0 +1,595 @@
+/*
+ * Linux I2C core SMBus and SMBus emulation code
+ *
+ * This file contains the SMBus functions which are always included in the I2C
+ * core because they can be emulated via I2C. SMBus specific extensions
+ * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ *
+ * All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
+ * SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ * Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/smbus.h>
+
+
+/* The SMBus parts */
+
+#define POLY    (0x1070U << 3)
+static u8 crc8(u16 data)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (data & 0x8000)
+			data = data ^ POLY;
+		data = data << 1;
+	}
+	return (u8)(data >> 8);
+}
+
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		crc = crc8((crc ^ p[i]) << 8);
+	return crc;
+}
+
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
+{
+	/* The address will be sent first */
+	u8 addr = i2c_8bit_addr_from_msg(msg);
+	pec = i2c_smbus_pec(pec, &addr, 1);
+
+	/* The data buffer follows */
+	return i2c_smbus_pec(pec, msg->buf, msg->len);
+}
+
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
+{
+	msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+	msg->len++;
+}
+
+/* Return <0 on CRC error
+   If there was a write before this read (most cases) we need to take the
+   partial CRC from the write part into account.
+   Note that this function does modify the message (we need to decrease the
+   message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
+{
+	u8 rpec = msg->buf[--msg->len];
+	cpec = i2c_smbus_msg_pec(cpec, msg);
+
+	if (rpec != cpec) {
+		pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
+			rpec, cpec);
+		return -EBADMSG;
+	}
+	return 0;
+}
+
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, 0,
+				I2C_SMBUS_BYTE, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
+{
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_BYTE_DATA, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+			      u8 value)
+{
+	union i2c_smbus_data data;
+	data.byte = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BYTE_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_WORD_DATA, &data);
+	return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+			      u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_WORD_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/**
+ * i2c_smbus_read_block_data - SMBus "block read" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @values: Byte array into which data will be read; big enough to hold
+ *	the data returned by the slave.  SMBus allows at most 32 bytes.
+ *
+ * This executes the SMBus "block read" protocol, returning negative errno
+ * else the number of data bytes in the slave's response.
+ *
+ * Note that using this function requires that the client's adapter support
+ * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality.  Not all adapter drivers
+ * support this; its emulation through I2C messaging relies on a specific
+ * mechanism (I2C_M_RECV_LEN) which may not be implemented.
+ */
+s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
+			      u8 *values)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_BLOCK_DATA, &data);
+	if (status)
+		return status;
+
+	memcpy(values, &data.block[1], data.block[0]);
+	return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_block_data);
+
+/**
+ * i2c_smbus_write_block_data - SMBus "block write" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most 32 bytes
+ * @values: Byte array which will be written.
+ *
+ * This executes the SMBus "block write" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
+			       u8 length, const u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(&data.block[1], values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
+				  u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_I2C_BLOCK_DATA, &data);
+	if (status < 0)
+		return status;
+
+	memcpy(values, &data.block[1], data.block[0]);
+	return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
+				   u8 length, const u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(data.block + 1, values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
+
+/* Simulate a SMBus command using the i2c protocol
+   No checking of parameters is done!  */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+				   unsigned short flags,
+				   char read_write, u8 command, int size,
+				   union i2c_smbus_data *data)
+{
+	/* So we need to generate a series of msgs. In the case of writing, we
+	  need to use only one message; when reading, we need two. We initialize
+	  most things with sane defaults, to keep the code below somewhat
+	  simpler. */
+	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
+	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
+	int i;
+	u8 partial_pec = 0;
+	int status;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = addr,
+			.flags = flags,
+			.len = 1,
+			.buf = msgbuf0,
+		}, {
+			.addr = addr,
+			.flags = flags | I2C_M_RD,
+			.len = 0,
+			.buf = msgbuf1,
+		},
+	};
+
+	msgbuf0[0] = command;
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		msg[0].len = 0;
+		/* Special case: The read/write field is used as data */
+		msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+					I2C_M_RD : 0);
+		num = 1;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			/* Special case: only a read! */
+			msg[0].flags = I2C_M_RD | flags;
+			num = 1;
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 1;
+		else {
+			msg[0].len = 2;
+			msgbuf0[1] = data->byte;
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 2;
+		else {
+			msg[0].len = 3;
+			msgbuf0[1] = data->word & 0xff;
+			msgbuf0[2] = data->word >> 8;
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		num = 2; /* Special case */
+		read_write = I2C_SMBUS_READ;
+		msg[0].len = 3;
+		msg[1].len = 2;
+		msgbuf0[1] = data->word & 0xff;
+		msgbuf0[2] = data->word >> 8;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].flags |= I2C_M_RECV_LEN;
+			msg[1].len = 1; /* block length will be added by
+					   the underlying bus driver */
+		} else {
+			msg[0].len = data->block[0] + 2;
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
+				dev_err(&adapter->dev,
+					"Invalid block write size %d\n",
+					data->block[0]);
+				return -EINVAL;
+			}
+			for (i = 1; i < msg[0].len; i++)
+				msgbuf0[i] = data->block[i-1];
+		}
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		num = 2; /* Another special case */
+		read_write = I2C_SMBUS_READ;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			dev_err(&adapter->dev,
+				"Invalid block write size %d\n",
+				data->block[0]);
+			return -EINVAL;
+		}
+		msg[0].len = data->block[0] + 2;
+		for (i = 1; i < msg[0].len; i++)
+			msgbuf0[i] = data->block[i-1];
+		msg[1].flags |= I2C_M_RECV_LEN;
+		msg[1].len = 1; /* block length will be added by
+				   the underlying bus driver */
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			dev_err(&adapter->dev, "Invalid block %s size %d\n",
+				read_write == I2C_SMBUS_READ ? "read" : "write",
+				data->block[0]);
+			return -EINVAL;
+		}
+
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].len = data->block[0];
+		} else {
+			msg[0].len = data->block[0] + 1;
+			for (i = 1; i <= data->block[0]; i++)
+				msgbuf0[i] = data->block[i];
+		}
+		break;
+	default:
+		dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+				      && size != I2C_SMBUS_I2C_BLOCK_DATA);
+	if (i) {
+		/* Compute PEC if first message is a write */
+		if (!(msg[0].flags & I2C_M_RD)) {
+			if (num == 1) /* Write only */
+				i2c_smbus_add_pec(&msg[0]);
+			else /* Write followed by read */
+				partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+		}
+		/* Ask for PEC if last message is a read */
+		if (msg[num-1].flags & I2C_M_RD)
+			msg[num-1].len++;
+	}
+
+	status = i2c_transfer(adapter, msg, num);
+	if (status < 0)
+		return status;
+
+	/* Check PEC if last message is a read */
+	if (i && (msg[num-1].flags & I2C_M_RD)) {
+		status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
+		if (status < 0)
+			return status;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = msgbuf0[0];
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = msgbuf1[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < data->block[0]; i++)
+				data->block[i+1] = msgbuf1[i];
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			for (i = 0; i < msgbuf1[0] + 1; i++)
+				data->block[i] = msgbuf1[i];
+			break;
+		}
+	return 0;
+}
+
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int protocol,
+		   union i2c_smbus_data *data)
+{
+	unsigned long orig_jiffies;
+	int try;
+	s32 res;
+
+	/* If enabled, the following two tracepoints are conditional on
+	 * read_write and protocol.
+	 */
+	trace_smbus_write(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_read(adapter, addr, flags, read_write,
+			 command, protocol);
+
+	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
+
+	if (adapter->algo->smbus_xfer) {
+		i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
+
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (res = 0, try = 0; try <= adapter->retries; try++) {
+			res = adapter->algo->smbus_xfer(adapter, addr, flags,
+							read_write, command,
+							protocol, data);
+			if (res != -EAGAIN)
+				break;
+			if (time_after(jiffies,
+				       orig_jiffies + adapter->timeout))
+				break;
+		}
+		i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
+
+		if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
+			goto trace;
+		/*
+		 * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
+		 * implement native support for the SMBus operation.
+		 */
+	}
+
+	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+				      command, protocol, data);
+
+trace:
+	/* If enabled, the reply tracepoint is conditional on read_write. */
+	trace_smbus_reply(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_result(adapter, addr, flags, read_write,
+			   command, protocol, res);
+
+	return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
+
+/**
+ * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
+ * @values: Byte array into which data will be read; big enough to hold
+ *	the data returned by the slave.  SMBus allows at most
+ *	I2C_SMBUS_BLOCK_MAX bytes.
+ *
+ * This executes the SMBus "block read" protocol if supported by the adapter.
+ * If block read is not supported, it emulates it using either word or byte
+ * read protocols depending on availability.
+ *
+ * The addresses of the I2C slave device that are accessed with this function
+ * must be mapped to a linear region, so that a block read will have the same
+ * effect as a byte read. Before using this function you must double-check
+ * if the I2C slave does support exchanging a block transfer with a byte
+ * transfer.
+ */
+s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
+					      u8 command, u8 length, u8 *values)
+{
+	u8 i = 0;
+	int status;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return i2c_smbus_read_i2c_block_data(client, command, length, values);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		while ((i + 2) <= length) {
+			status = i2c_smbus_read_word_data(client, command + i);
+			if (status < 0)
+				return status;
+			values[i] = status & 0xff;
+			values[i + 1] = status >> 8;
+			i += 2;
+		}
+	}
+
+	while (i < length) {
+		status = i2c_smbus_read_byte_data(client, command + i);
+		if (status < 0)
+			return status;
+		values[i] = status;
+		i++;
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-core.h b/src/kernel/linux/v4.14/drivers/i2c/i2c-core.h
new file mode 100644
index 0000000..3d3d9bf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-core.h
@@ -0,0 +1,62 @@
+/*
+ * i2c-core.h - interfaces internal to the I2C framework
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/rwsem.h>
+
+struct i2c_devinfo {
+	struct list_head	list;
+	int			busnum;
+	struct i2c_board_info	board_info;
+};
+
+/* board_lock protects board_list and first_dynamic_bus_num.
+ * only i2c core components are allowed to use these symbols.
+ */
+extern struct rw_semaphore	__i2c_board_lock;
+extern struct list_head	__i2c_board_list;
+extern int		__i2c_first_dynamic_bus_num;
+
+int i2c_check_addr_validity(unsigned addr, unsigned short flags);
+int i2c_check_7bit_addr_validity_strict(unsigned short addr);
+
+#ifdef CONFIG_ACPI
+const struct acpi_device_id *
+i2c_acpi_match_device(const struct acpi_device_id *matches,
+		      struct i2c_client *client);
+void i2c_acpi_register_devices(struct i2c_adapter *adap);
+#else /* CONFIG_ACPI */
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
+static inline const struct acpi_device_id *
+i2c_acpi_match_device(const struct acpi_device_id *matches,
+		      struct i2c_client *client)
+{
+	return NULL;
+}
+#endif /* CONFIG_ACPI */
+extern struct notifier_block i2c_acpi_notifier;
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter);
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter);
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) { return 0; }
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) { }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
+#ifdef CONFIG_OF
+void of_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif
+extern struct notifier_block i2c_of_notifier;
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-dev.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-dev.c
new file mode 100644
index 0000000..c406627
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-dev.c
@@ -0,0 +1,684 @@
+/*
+    i2c-dev.c - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+    Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
+   But I have used so much of his original code and ideas that it seems
+   only fair to recognize him as co-author -- Frodo */
+
+/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c-dev.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+/*
+ * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a
+ * slave (i2c_client) with which messages will be exchanged.  It's coupled
+ * with a character special file which is accessed by user mode drivers.
+ *
+ * The list of i2c_dev structures is parallel to the i2c_adapter lists
+ * maintained by the driver model, and is updated using bus notifications.
+ */
+struct i2c_dev {
+	struct list_head list;
+	struct i2c_adapter *adap;
+	struct device dev;
+	struct cdev cdev;
+};
+
+#define I2C_MINORS	MINORMASK
+static LIST_HEAD(i2c_dev_list);
+static DEFINE_SPINLOCK(i2c_dev_list_lock);
+
+static struct i2c_dev *i2c_dev_get_by_minor(unsigned index)
+{
+	struct i2c_dev *i2c_dev;
+
+	spin_lock(&i2c_dev_list_lock);
+	list_for_each_entry(i2c_dev, &i2c_dev_list, list) {
+		if (i2c_dev->adap->nr == index)
+			goto found;
+	}
+	i2c_dev = NULL;
+found:
+	spin_unlock(&i2c_dev_list_lock);
+	return i2c_dev;
+}
+
+static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
+{
+	struct i2c_dev *i2c_dev;
+
+	if (adap->nr >= I2C_MINORS) {
+		printk(KERN_ERR "i2c-dev: Out of device minors (%d)\n",
+		       adap->nr);
+		return ERR_PTR(-ENODEV);
+	}
+
+	i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return ERR_PTR(-ENOMEM);
+	i2c_dev->adap = adap;
+
+	spin_lock(&i2c_dev_list_lock);
+	list_add_tail(&i2c_dev->list, &i2c_dev_list);
+	spin_unlock(&i2c_dev_list_lock);
+	return i2c_dev;
+}
+
+static void put_i2c_dev(struct i2c_dev *i2c_dev, bool del_cdev)
+{
+	spin_lock(&i2c_dev_list_lock);
+	list_del(&i2c_dev->list);
+	spin_unlock(&i2c_dev_list_lock);
+	if (del_cdev)
+		cdev_device_del(&i2c_dev->cdev, &i2c_dev->dev);
+	put_device(&i2c_dev->dev);
+}
+
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt));
+
+	if (!i2c_dev)
+		return -ENODEV;
+	return sprintf(buf, "%s\n", i2c_dev->adap->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static struct attribute *i2c_attrs[] = {
+	&dev_attr_name.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i2c);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * After opening an instance of this character special file, a file
+ * descriptor starts out associated only with an i2c_adapter (and bus).
+ *
+ * Using the I2C_RDWR ioctl(), you can then *immediately* issue i2c_msg
+ * traffic to any devices on the bus used by that adapter.  That's because
+ * the i2c_msg vectors embed all the addressing information they need, and
+ * are submitted directly to an i2c_adapter.  However, SMBus-only adapters
+ * don't support that interface.
+ *
+ * To use read()/write() system calls on that file descriptor, or to use
+ * SMBus interfaces (and work with SMBus-only hosts!), you must first issue
+ * an I2C_SLAVE (or I2C_SLAVE_FORCE) ioctl.  That configures an anonymous
+ * (never registered) i2c_client so it holds the addressing information
+ * needed by those system calls and by this SMBus interface.
+ */
+
+static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
+		loff_t *offset)
+{
+	char *tmp;
+	int ret;
+
+	struct i2c_client *client = file->private_data;
+
+	if (count > 8192)
+		count = 8192;
+
+	tmp = kmalloc(count, GFP_KERNEL);
+	if (tmp == NULL)
+		return -ENOMEM;
+
+	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
+		iminor(file_inode(file)), count);
+
+	ret = i2c_master_recv(client, tmp, count);
+	if (ret >= 0)
+		ret = copy_to_user(buf, tmp, count) ? -EFAULT : ret;
+	kfree(tmp);
+	return ret;
+}
+
+static ssize_t i2cdev_write(struct file *file, const char __user *buf,
+		size_t count, loff_t *offset)
+{
+	int ret;
+	char *tmp;
+	struct i2c_client *client = file->private_data;
+
+	if (count > 8192)
+		count = 8192;
+
+	tmp = memdup_user(buf, count);
+	if (IS_ERR(tmp))
+		return PTR_ERR(tmp);
+
+	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
+		iminor(file_inode(file)), count);
+
+	ret = i2c_master_send(client, tmp, count);
+	kfree(tmp);
+	return ret;
+}
+
+static int i2cdev_check(struct device *dev, void *addrp)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+
+	if (!client || client->addr != *(unsigned int *)addrp)
+		return 0;
+
+	return dev->driver ? -EBUSY : 0;
+}
+
+/* walk up mux tree */
+static int i2cdev_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+	int result;
+
+	result = device_for_each_child(&adapter->dev, &addr, i2cdev_check);
+	if (!result && parent)
+		result = i2cdev_check_mux_parents(parent, addr);
+
+	return result;
+}
+
+/* recurse down mux tree */
+static int i2cdev_check_mux_children(struct device *dev, void *addrp)
+{
+	int result;
+
+	if (dev->type == &i2c_adapter_type)
+		result = device_for_each_child(dev, addrp,
+						i2cdev_check_mux_children);
+	else
+		result = i2cdev_check(dev, addrp);
+
+	return result;
+}
+
+/* This address checking function differs from the one in i2c-core
+   in that it considers an address with a registered device, but no
+   driver bound to it, as NOT busy. */
+static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
+{
+	struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+	int result = 0;
+
+	if (parent)
+		result = i2cdev_check_mux_parents(parent, addr);
+
+	if (!result)
+		result = device_for_each_child(&adapter->dev, &addr,
+						i2cdev_check_mux_children);
+
+	return result;
+}
+
+static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
+		unsigned long arg)
+{
+	struct i2c_rdwr_ioctl_data rdwr_arg;
+	struct i2c_msg *rdwr_pa;
+	u8 __user **data_ptrs;
+	int i, res;
+
+	if (copy_from_user(&rdwr_arg,
+			   (struct i2c_rdwr_ioctl_data __user *)arg,
+			   sizeof(rdwr_arg)))
+		return -EFAULT;
+
+	/* Put an arbitrary limit on the number of messages that can
+	 * be sent at once */
+	if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS)
+		return -EINVAL;
+
+	rdwr_pa = memdup_user(rdwr_arg.msgs,
+			      rdwr_arg.nmsgs * sizeof(struct i2c_msg));
+	if (IS_ERR(rdwr_pa))
+		return PTR_ERR(rdwr_pa);
+
+	data_ptrs = kmalloc(rdwr_arg.nmsgs * sizeof(u8 __user *), GFP_KERNEL);
+	if (data_ptrs == NULL) {
+		kfree(rdwr_pa);
+		return -ENOMEM;
+	}
+
+	res = 0;
+	for (i = 0; i < rdwr_arg.nmsgs; i++) {
+		/* Limit the size of the message to a sane amount */
+		if (rdwr_pa[i].len > 8192) {
+			res = -EINVAL;
+			break;
+		}
+
+		data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf;
+		rdwr_pa[i].buf = memdup_user(data_ptrs[i], rdwr_pa[i].len);
+		if (IS_ERR(rdwr_pa[i].buf)) {
+			res = PTR_ERR(rdwr_pa[i].buf);
+			break;
+		}
+
+		/*
+		 * If the message length is received from the slave (similar
+		 * to SMBus block read), we must ensure that the buffer will
+		 * be large enough to cope with a message length of
+		 * I2C_SMBUS_BLOCK_MAX as this is the maximum underlying bus
+		 * drivers allow. The first byte in the buffer must be
+		 * pre-filled with the number of extra bytes, which must be
+		 * at least one to hold the message length, but can be
+		 * greater (for example to account for a checksum byte at
+		 * the end of the message.)
+		 */
+		if (rdwr_pa[i].flags & I2C_M_RECV_LEN) {
+			if (!(rdwr_pa[i].flags & I2C_M_RD) ||
+			    rdwr_pa[i].buf[0] < 1 ||
+			    rdwr_pa[i].len < rdwr_pa[i].buf[0] +
+					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
+				res = -EINVAL;
+				break;
+			}
+
+			rdwr_pa[i].len = rdwr_pa[i].buf[0];
+		}
+	}
+	if (res < 0) {
+		int j;
+		for (j = 0; j < i; ++j)
+			kfree(rdwr_pa[j].buf);
+		kfree(data_ptrs);
+		kfree(rdwr_pa);
+		return res;
+	}
+
+	res = i2c_transfer(client->adapter, rdwr_pa, rdwr_arg.nmsgs);
+	while (i-- > 0) {
+		if (res >= 0 && (rdwr_pa[i].flags & I2C_M_RD)) {
+			if (copy_to_user(data_ptrs[i], rdwr_pa[i].buf,
+					 rdwr_pa[i].len))
+				res = -EFAULT;
+		}
+		kfree(rdwr_pa[i].buf);
+	}
+	kfree(data_ptrs);
+	kfree(rdwr_pa);
+	return res;
+}
+
+static noinline int i2cdev_ioctl_smbus(struct i2c_client *client,
+		unsigned long arg)
+{
+	struct i2c_smbus_ioctl_data data_arg;
+	union i2c_smbus_data temp = {};
+	int datasize, res;
+
+	if (copy_from_user(&data_arg,
+			   (struct i2c_smbus_ioctl_data __user *) arg,
+			   sizeof(struct i2c_smbus_ioctl_data)))
+		return -EFAULT;
+	if ((data_arg.size != I2C_SMBUS_BYTE) &&
+	    (data_arg.size != I2C_SMBUS_QUICK) &&
+	    (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
+	    (data_arg.size != I2C_SMBUS_WORD_DATA) &&
+	    (data_arg.size != I2C_SMBUS_PROC_CALL) &&
+	    (data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
+	    (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) &&
+	    (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) &&
+	    (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) {
+		dev_dbg(&client->adapter->dev,
+			"size out of range (%x) in ioctl I2C_SMBUS.\n",
+			data_arg.size);
+		return -EINVAL;
+	}
+	/* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
+	   so the check is valid if size==I2C_SMBUS_QUICK too. */
+	if ((data_arg.read_write != I2C_SMBUS_READ) &&
+	    (data_arg.read_write != I2C_SMBUS_WRITE)) {
+		dev_dbg(&client->adapter->dev,
+			"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
+			data_arg.read_write);
+		return -EINVAL;
+	}
+
+	/* Note that command values are always valid! */
+
+	if ((data_arg.size == I2C_SMBUS_QUICK) ||
+	    ((data_arg.size == I2C_SMBUS_BYTE) &&
+	    (data_arg.read_write == I2C_SMBUS_WRITE)))
+		/* These are special: we do not use data */
+		return i2c_smbus_xfer(client->adapter, client->addr,
+				      client->flags, data_arg.read_write,
+				      data_arg.command, data_arg.size, NULL);
+
+	if (data_arg.data == NULL) {
+		dev_dbg(&client->adapter->dev,
+			"data is NULL pointer in ioctl I2C_SMBUS.\n");
+		return -EINVAL;
+	}
+
+	if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
+	    (data_arg.size == I2C_SMBUS_BYTE))
+		datasize = sizeof(data_arg.data->byte);
+	else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
+		 (data_arg.size == I2C_SMBUS_PROC_CALL))
+		datasize = sizeof(data_arg.data->word);
+	else /* size == smbus block, i2c block, or block proc. call */
+		datasize = sizeof(data_arg.data->block);
+
+	if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+	    (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+	    (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) ||
+	    (data_arg.read_write == I2C_SMBUS_WRITE)) {
+		if (copy_from_user(&temp, data_arg.data, datasize))
+			return -EFAULT;
+	}
+	if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) {
+		/* Convert old I2C block commands to the new
+		   convention. This preserves binary compatibility. */
+		data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA;
+		if (data_arg.read_write == I2C_SMBUS_READ)
+			temp.block[0] = I2C_SMBUS_BLOCK_MAX;
+	}
+	res = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+	      data_arg.read_write, data_arg.command, data_arg.size, &temp);
+	if (!res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+		     (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+		     (data_arg.read_write == I2C_SMBUS_READ))) {
+		if (copy_to_user(data_arg.data, &temp, datasize))
+			return -EFAULT;
+	}
+	return res;
+}
+
+static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = file->private_data;
+	unsigned long funcs;
+
+	dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
+		cmd, arg);
+
+	switch (cmd) {
+	case I2C_SLAVE:
+	case I2C_SLAVE_FORCE:
+		if ((arg > 0x3ff) ||
+		    (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
+			return -EINVAL;
+		if (cmd == I2C_SLAVE && i2cdev_check_addr(client->adapter, arg))
+			return -EBUSY;
+		/* REVISIT: address could become busy later */
+		client->addr = arg;
+		return 0;
+	case I2C_TENBIT:
+		if (arg)
+			client->flags |= I2C_M_TEN;
+		else
+			client->flags &= ~I2C_M_TEN;
+		return 0;
+	case I2C_PEC:
+		/*
+		 * Setting the PEC flag here won't affect kernel drivers,
+		 * which will be using the i2c_client node registered with
+		 * the driver model core.  Likewise, when that client has
+		 * the PEC flag already set, the i2c-dev driver won't see
+		 * (or use) this setting.
+		 */
+		if (arg)
+			client->flags |= I2C_CLIENT_PEC;
+		else
+			client->flags &= ~I2C_CLIENT_PEC;
+		return 0;
+	case I2C_FUNCS:
+		funcs = i2c_get_functionality(client->adapter);
+		return put_user(funcs, (unsigned long __user *)arg);
+
+	case I2C_RDWR:
+		return i2cdev_ioctl_rdwr(client, arg);
+
+	case I2C_SMBUS:
+		return i2cdev_ioctl_smbus(client, arg);
+
+	case I2C_RETRIES:
+		if (arg > INT_MAX)
+			return -EINVAL;
+
+		client->adapter->retries = arg;
+		break;
+	case I2C_TIMEOUT:
+		if (arg > INT_MAX)
+			return -EINVAL;
+
+		/* For historical reasons, user-space sets the timeout
+		 * value in units of 10 ms.
+		 */
+		client->adapter->timeout = msecs_to_jiffies(arg * 10);
+		break;
+	default:
+		/* NOTE:  returning a fault code here could cause trouble
+		 * in buggy userspace code.  Some old kernel bugs returned
+		 * zero in this case, and userspace code might accidentally
+		 * have depended on that bug.
+		 */
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int i2cdev_open(struct inode *inode, struct file *file)
+{
+	unsigned int minor = iminor(inode);
+	struct i2c_client *client;
+	struct i2c_adapter *adap;
+
+	adap = i2c_get_adapter(minor);
+	if (!adap)
+		return -ENODEV;
+
+	/* This creates an anonymous i2c_client, which may later be
+	 * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.
+	 *
+	 * This client is ** NEVER REGISTERED ** with the driver model
+	 * or I2C core code!!  It just holds private copies of addressing
+	 * information and maybe a PEC flag.
+	 */
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (!client) {
+		i2c_put_adapter(adap);
+		return -ENOMEM;
+	}
+	snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
+
+	client->adapter = adap;
+	file->private_data = client;
+
+	return 0;
+}
+
+static int i2cdev_release(struct inode *inode, struct file *file)
+{
+	struct i2c_client *client = file->private_data;
+
+	i2c_put_adapter(client->adapter);
+	kfree(client);
+	file->private_data = NULL;
+
+	return 0;
+}
+
+static const struct file_operations i2cdev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= i2cdev_read,
+	.write		= i2cdev_write,
+	.unlocked_ioctl	= i2cdev_ioctl,
+	.open		= i2cdev_open,
+	.release	= i2cdev_release,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static struct class *i2c_dev_class;
+
+static void i2cdev_dev_release(struct device *dev)
+{
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = container_of(dev, struct i2c_dev, dev);
+	kfree(i2c_dev);
+}
+
+static int i2cdev_attach_adapter(struct device *dev, void *dummy)
+{
+	struct i2c_adapter *adap;
+	struct i2c_dev *i2c_dev;
+	int res;
+
+	if (dev->type != &i2c_adapter_type)
+		return 0;
+	adap = to_i2c_adapter(dev);
+
+	i2c_dev = get_free_i2c_dev(adap);
+	if (IS_ERR(i2c_dev))
+		return PTR_ERR(i2c_dev);
+
+	cdev_init(&i2c_dev->cdev, &i2cdev_fops);
+	i2c_dev->cdev.owner = THIS_MODULE;
+
+	device_initialize(&i2c_dev->dev);
+	i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
+	i2c_dev->dev.class = i2c_dev_class;
+	i2c_dev->dev.parent = &adap->dev;
+	i2c_dev->dev.release = i2cdev_dev_release;
+	dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr);
+
+	res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev);
+	if (res) {
+		put_i2c_dev(i2c_dev, false);
+		return res;
+	}
+
+	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
+		 adap->name, adap->nr);
+	return 0;
+}
+
+static int i2cdev_detach_adapter(struct device *dev, void *dummy)
+{
+	struct i2c_adapter *adap;
+	struct i2c_dev *i2c_dev;
+
+	if (dev->type != &i2c_adapter_type)
+		return 0;
+	adap = to_i2c_adapter(dev);
+
+	i2c_dev = i2c_dev_get_by_minor(adap->nr);
+	if (!i2c_dev) /* attach_adapter must have failed */
+		return 0;
+
+	put_i2c_dev(i2c_dev, true);
+
+	pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
+	return 0;
+}
+
+static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
+			 void *data)
+{
+	struct device *dev = data;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		return i2cdev_attach_adapter(dev, NULL);
+	case BUS_NOTIFY_DEL_DEVICE:
+		return i2cdev_detach_adapter(dev, NULL);
+	}
+
+	return 0;
+}
+
+static struct notifier_block i2cdev_notifier = {
+	.notifier_call = i2cdev_notifier_call,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * module load/unload record keeping
+ */
+
+static int __init i2c_dev_init(void)
+{
+	int res;
+
+	printk(KERN_INFO "i2c /dev entries driver\n");
+
+	res = register_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS, "i2c");
+	if (res)
+		goto out;
+
+	i2c_dev_class = class_create(THIS_MODULE, "i2c-dev");
+	if (IS_ERR(i2c_dev_class)) {
+		res = PTR_ERR(i2c_dev_class);
+		goto out_unreg_chrdev;
+	}
+	i2c_dev_class->dev_groups = i2c_groups;
+
+	/* Keep track of adapters which will be added or removed later */
+	res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
+	if (res)
+		goto out_unreg_class;
+
+	/* Bind to already existing adapters right away */
+	i2c_for_each_dev(NULL, i2cdev_attach_adapter);
+
+	return 0;
+
+out_unreg_class:
+	class_destroy(i2c_dev_class);
+out_unreg_chrdev:
+	unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
+out:
+	printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__);
+	return res;
+}
+
+static void __exit i2c_dev_exit(void)
+{
+	bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
+	i2c_for_each_dev(NULL, i2cdev_detach_adapter);
+	class_destroy(i2c_dev_class);
+	unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C /dev entries driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_dev_init);
+module_exit(i2c_dev_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-mux.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-mux.c
new file mode 100644
index 0000000..7ba31f6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-mux.c
@@ -0,0 +1,459 @@
+/*
+ * Multiplexed I2C bus driver.
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (c) 2009-2010 NSN GmbH & Co KG <michael.lawnick.ext@nsn.com>
+ *
+ * Simplifies access to complex multiplexed I2C bus topologies, by presenting
+ * each multiplexed bus segment as an additional I2C adapter.
+ * Supports multi-level mux'ing (mux behind a mux).
+ *
+ * Based on:
+ *	i2c-virt.c from Kumar Gala <galak@kernel.crashing.org>
+ *	i2c-virtual.c from Ken Harrenstien, Copyright (c) 2004 Google, Inc.
+ *	i2c-virtual.c from Brian Kuschak <bkuschak@yahoo.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+/* multiplexer per channel data */
+struct i2c_mux_priv {
+	struct i2c_adapter adap;
+	struct i2c_algorithm algo;
+	struct i2c_mux_core *muxc;
+	u32 chan_id;
+};
+
+static int __i2c_mux_master_xfer(struct i2c_adapter *adap,
+				 struct i2c_msg msgs[], int num)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Switch to the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = __i2c_transfer(parent, msgs, num);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
+static int i2c_mux_master_xfer(struct i2c_adapter *adap,
+			       struct i2c_msg msgs[], int num)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Switch to the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = i2c_transfer(parent, msgs, num);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
+static int __i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+				u16 addr, unsigned short flags,
+				char read_write, u8 command,
+				int size, union i2c_smbus_data *data)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Select the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = parent->algo->smbus_xfer(parent, addr, flags,
+					read_write, command, size, data);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
+static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+			      u16 addr, unsigned short flags,
+			      char read_write, u8 command,
+			      int size, union i2c_smbus_data *data)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Select the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = i2c_smbus_xfer(parent, addr, flags,
+				     read_write, command, size, data);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
+/* Return the parent's functionality */
+static u32 i2c_mux_functionality(struct i2c_adapter *adap)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	return parent->algo->functionality(parent);
+}
+
+/* Return all parent classes, merged */
+static unsigned int i2c_mux_parent_classes(struct i2c_adapter *parent)
+{
+	unsigned int class = 0;
+
+	do {
+		class |= parent->class;
+		parent = i2c_parent_is_i2c_adapter(parent);
+	} while (parent);
+
+	return class;
+}
+
+static void i2c_mux_lock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	rt_mutex_lock_nested(&parent->mux_lock, i2c_adapter_depth(adapter));
+	if (!(flags & I2C_LOCK_ROOT_ADAPTER))
+		return;
+	i2c_lock_bus(parent, flags);
+}
+
+static int i2c_mux_trylock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	if (!rt_mutex_trylock(&parent->mux_lock))
+		return 0;	/* mux_lock not locked, failure */
+	if (!(flags & I2C_LOCK_ROOT_ADAPTER))
+		return 1;	/* we only want mux_lock, success */
+	if (i2c_trylock_bus(parent, flags))
+		return 1;	/* parent locked too, success */
+	rt_mutex_unlock(&parent->mux_lock);
+	return 0;		/* parent not locked, failure */
+}
+
+static void i2c_mux_unlock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	if (flags & I2C_LOCK_ROOT_ADAPTER)
+		i2c_unlock_bus(parent, flags);
+	rt_mutex_unlock(&parent->mux_lock);
+}
+
+static void i2c_parent_lock_bus(struct i2c_adapter *adapter,
+				unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	rt_mutex_lock_nested(&parent->mux_lock, i2c_adapter_depth(adapter));
+	i2c_lock_bus(parent, flags);
+}
+
+static int i2c_parent_trylock_bus(struct i2c_adapter *adapter,
+				  unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	if (!rt_mutex_trylock(&parent->mux_lock))
+		return 0;	/* mux_lock not locked, failure */
+	if (i2c_trylock_bus(parent, flags))
+		return 1;	/* parent locked too, success */
+	rt_mutex_unlock(&parent->mux_lock);
+	return 0;		/* parent not locked, failure */
+}
+
+static void i2c_parent_unlock_bus(struct i2c_adapter *adapter,
+				  unsigned int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	i2c_unlock_bus(parent, flags);
+	rt_mutex_unlock(&parent->mux_lock);
+}
+
+struct i2c_adapter *i2c_root_adapter(struct device *dev)
+{
+	struct device *i2c;
+	struct i2c_adapter *i2c_root;
+
+	/*
+	 * Walk up the device tree to find an i2c adapter, indicating
+	 * that this is an i2c client device. Check all ancestors to
+	 * handle mfd devices etc.
+	 */
+	for (i2c = dev; i2c; i2c = i2c->parent) {
+		if (i2c->type == &i2c_adapter_type)
+			break;
+	}
+	if (!i2c)
+		return NULL;
+
+	/* Continue up the tree to find the root i2c adapter */
+	i2c_root = to_i2c_adapter(i2c);
+	while (i2c_parent_is_i2c_adapter(i2c_root))
+		i2c_root = i2c_parent_is_i2c_adapter(i2c_root);
+
+	return i2c_root;
+}
+EXPORT_SYMBOL_GPL(i2c_root_adapter);
+
+struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
+				   struct device *dev, int max_adapters,
+				   int sizeof_priv, u32 flags,
+				   int (*select)(struct i2c_mux_core *, u32),
+				   int (*deselect)(struct i2c_mux_core *, u32))
+{
+	struct i2c_mux_core *muxc;
+
+	muxc = devm_kzalloc(dev, sizeof(*muxc)
+			    + max_adapters * sizeof(muxc->adapter[0])
+			    + sizeof_priv, GFP_KERNEL);
+	if (!muxc)
+		return NULL;
+	if (sizeof_priv)
+		muxc->priv = &muxc->adapter[max_adapters];
+
+	muxc->parent = parent;
+	muxc->dev = dev;
+	if (flags & I2C_MUX_LOCKED)
+		muxc->mux_locked = true;
+	if (flags & I2C_MUX_ARBITRATOR)
+		muxc->arbitrator = true;
+	if (flags & I2C_MUX_GATE)
+		muxc->gate = true;
+	muxc->select = select;
+	muxc->deselect = deselect;
+	muxc->max_adapters = max_adapters;
+
+	return muxc;
+}
+EXPORT_SYMBOL_GPL(i2c_mux_alloc);
+
+static const struct i2c_lock_operations i2c_mux_lock_ops = {
+	.lock_bus =    i2c_mux_lock_bus,
+	.trylock_bus = i2c_mux_trylock_bus,
+	.unlock_bus =  i2c_mux_unlock_bus,
+};
+
+static const struct i2c_lock_operations i2c_parent_lock_ops = {
+	.lock_bus =    i2c_parent_lock_bus,
+	.trylock_bus = i2c_parent_trylock_bus,
+	.unlock_bus =  i2c_parent_unlock_bus,
+};
+
+int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
+			u32 force_nr, u32 chan_id,
+			unsigned int class)
+{
+	struct i2c_adapter *parent = muxc->parent;
+	struct i2c_mux_priv *priv;
+	char symlink_name[20];
+	int ret;
+
+	if (muxc->num_adapters >= muxc->max_adapters) {
+		dev_err(muxc->dev, "No room for more i2c-mux adapters\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Set up private adapter data */
+	priv->muxc = muxc;
+	priv->chan_id = chan_id;
+
+	/* Need to do algo dynamically because we don't know ahead
+	 * of time what sort of physical adapter we'll be dealing with.
+	 */
+	if (parent->algo->master_xfer) {
+		if (muxc->mux_locked)
+			priv->algo.master_xfer = i2c_mux_master_xfer;
+		else
+			priv->algo.master_xfer = __i2c_mux_master_xfer;
+	}
+	if (parent->algo->smbus_xfer) {
+		if (muxc->mux_locked)
+			priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+		else
+			priv->algo.smbus_xfer = __i2c_mux_smbus_xfer;
+	}
+	priv->algo.functionality = i2c_mux_functionality;
+
+	/* Now fill out new adapter structure */
+	snprintf(priv->adap.name, sizeof(priv->adap.name),
+		 "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &priv->algo;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &parent->dev;
+	priv->adap.retries = parent->retries;
+	priv->adap.timeout = parent->timeout;
+	priv->adap.quirks = parent->quirks;
+	if (muxc->mux_locked)
+		priv->adap.lock_ops = &i2c_mux_lock_ops;
+	else
+		priv->adap.lock_ops = &i2c_parent_lock_ops;
+
+	/* Sanity check on class */
+	if (i2c_mux_parent_classes(parent) & class)
+		dev_err(&parent->dev,
+			"Segment %d behind mux can't share classes with ancestors\n",
+			chan_id);
+	else
+		priv->adap.class = class;
+
+	/*
+	 * Try to populate the mux adapter's of_node, expands to
+	 * nothing if !CONFIG_OF.
+	 */
+	if (muxc->dev->of_node) {
+		struct device_node *dev_node = muxc->dev->of_node;
+		struct device_node *mux_node, *child = NULL;
+		u32 reg;
+
+		if (muxc->arbitrator)
+			mux_node = of_get_child_by_name(dev_node, "i2c-arb");
+		else if (muxc->gate)
+			mux_node = of_get_child_by_name(dev_node, "i2c-gate");
+		else
+			mux_node = of_get_child_by_name(dev_node, "i2c-mux");
+
+		if (mux_node) {
+			/* A "reg" property indicates an old-style DT entry */
+			if (!of_property_read_u32(mux_node, "reg", &reg)) {
+				of_node_put(mux_node);
+				mux_node = NULL;
+			}
+		}
+
+		if (!mux_node)
+			mux_node = of_node_get(dev_node);
+		else if (muxc->arbitrator || muxc->gate)
+			child = of_node_get(mux_node);
+
+		if (!child) {
+			for_each_child_of_node(mux_node, child) {
+				ret = of_property_read_u32(child, "reg", &reg);
+				if (ret)
+					continue;
+				if (chan_id == reg)
+					break;
+			}
+		}
+
+		priv->adap.dev.of_node = child;
+		of_node_put(mux_node);
+	}
+
+	/*
+	 * Associate the mux channel with an ACPI node.
+	 */
+	if (has_acpi_companion(muxc->dev))
+		acpi_preset_companion(&priv->adap.dev,
+				      ACPI_COMPANION(muxc->dev),
+				      chan_id);
+
+	if (force_nr) {
+		priv->adap.nr = force_nr;
+		ret = i2c_add_numbered_adapter(&priv->adap);
+		if (ret < 0) {
+			dev_err(&parent->dev,
+				"failed to add mux-adapter %u as bus %u (error=%d)\n",
+				chan_id, force_nr, ret);
+			goto err_free_priv;
+		}
+	} else {
+		ret = i2c_add_adapter(&priv->adap);
+		if (ret < 0) {
+			dev_err(&parent->dev,
+				"failed to add mux-adapter %u (error=%d)\n",
+				chan_id, ret);
+			goto err_free_priv;
+		}
+	}
+
+	WARN(sysfs_create_link(&priv->adap.dev.kobj, &muxc->dev->kobj,
+			       "mux_device"),
+	     "can't create symlink to mux device\n");
+
+	snprintf(symlink_name, sizeof(symlink_name), "channel-%u", chan_id);
+	WARN(sysfs_create_link(&muxc->dev->kobj, &priv->adap.dev.kobj,
+			       symlink_name),
+	     "can't create symlink for channel %u\n", chan_id);
+	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
+		 i2c_adapter_id(&priv->adap));
+
+	muxc->adapter[muxc->num_adapters++] = &priv->adap;
+	return 0;
+
+err_free_priv:
+	kfree(priv);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_mux_add_adapter);
+
+void i2c_mux_del_adapters(struct i2c_mux_core *muxc)
+{
+	char symlink_name[20];
+
+	while (muxc->num_adapters) {
+		struct i2c_adapter *adap = muxc->adapter[--muxc->num_adapters];
+		struct i2c_mux_priv *priv = adap->algo_data;
+		struct device_node *np = adap->dev.of_node;
+
+		muxc->adapter[muxc->num_adapters] = NULL;
+
+		snprintf(symlink_name, sizeof(symlink_name),
+			 "channel-%u", priv->chan_id);
+		sysfs_remove_link(&muxc->dev->kobj, symlink_name);
+
+		sysfs_remove_link(&priv->adap.dev.kobj, "mux_device");
+		i2c_del_adapter(adap);
+		of_node_put(np);
+		kfree(priv);
+	}
+}
+EXPORT_SYMBOL_GPL(i2c_mux_del_adapters);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("I2C driver for multiplexed I2C busses");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-slave-eeprom.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-slave-eeprom.c
new file mode 100644
index 0000000..b2039f9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-slave-eeprom.c
@@ -0,0 +1,169 @@
+/*
+ * I2C slave mode EEPROM simulator
+ *
+ * Copyright (C) 2014 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2014 by Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * Because most IP blocks can only detect one I2C slave address anyhow, this
+ * driver does not support simulating EEPROM types which take more than one
+ * address. It is prepared to simulate bigger EEPROMs with an internal 16 bit
+ * pointer, yet implementation is deferred until the need actually arises.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+
+struct eeprom_data {
+	struct bin_attribute bin;
+	bool first_write;
+	spinlock_t buffer_lock;
+	u8 buffer_idx;
+	u8 buffer[];
+};
+
+static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
+				     enum i2c_slave_event event, u8 *val)
+{
+	struct eeprom_data *eeprom = i2c_get_clientdata(client);
+
+	switch (event) {
+	case I2C_SLAVE_WRITE_RECEIVED:
+		if (eeprom->first_write) {
+			eeprom->buffer_idx = *val;
+			eeprom->first_write = false;
+		} else {
+			spin_lock(&eeprom->buffer_lock);
+			eeprom->buffer[eeprom->buffer_idx++] = *val;
+			spin_unlock(&eeprom->buffer_lock);
+		}
+		break;
+
+	case I2C_SLAVE_READ_PROCESSED:
+		/* The previous byte made it to the bus, get next one */
+		eeprom->buffer_idx++;
+		/* fallthrough */
+	case I2C_SLAVE_READ_REQUESTED:
+		spin_lock(&eeprom->buffer_lock);
+		*val = eeprom->buffer[eeprom->buffer_idx];
+		spin_unlock(&eeprom->buffer_lock);
+		/*
+		 * Do not increment buffer_idx here, because we don't know if
+		 * this byte will be actually used. Read Linux I2C slave docs
+		 * for details.
+		 */
+		break;
+
+	case I2C_SLAVE_STOP:
+	case I2C_SLAVE_WRITE_REQUESTED:
+		eeprom->first_write = true;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	struct eeprom_data *eeprom;
+	unsigned long flags;
+
+	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+	spin_lock_irqsave(&eeprom->buffer_lock, flags);
+	memcpy(buf, &eeprom->buffer[off], count);
+	spin_unlock_irqrestore(&eeprom->buffer_lock, flags);
+
+	return count;
+}
+
+static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	struct eeprom_data *eeprom;
+	unsigned long flags;
+
+	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+	spin_lock_irqsave(&eeprom->buffer_lock, flags);
+	memcpy(&eeprom->buffer[off], buf, count);
+	spin_unlock_irqrestore(&eeprom->buffer_lock, flags);
+
+	return count;
+}
+
+static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct eeprom_data *eeprom;
+	int ret;
+	unsigned size = id->driver_data;
+
+	eeprom = devm_kzalloc(&client->dev, sizeof(struct eeprom_data) + size, GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	eeprom->first_write = true;
+	spin_lock_init(&eeprom->buffer_lock);
+	i2c_set_clientdata(client, eeprom);
+
+	sysfs_bin_attr_init(&eeprom->bin);
+	eeprom->bin.attr.name = "slave-eeprom";
+	eeprom->bin.attr.mode = S_IRUSR | S_IWUSR;
+	eeprom->bin.read = i2c_slave_eeprom_bin_read;
+	eeprom->bin.write = i2c_slave_eeprom_bin_write;
+	eeprom->bin.size = size;
+
+	ret = sysfs_create_bin_file(&client->dev.kobj, &eeprom->bin);
+	if (ret)
+		return ret;
+
+	ret = i2c_slave_register(client, i2c_slave_eeprom_slave_cb);
+	if (ret) {
+		sysfs_remove_bin_file(&client->dev.kobj, &eeprom->bin);
+		return ret;
+	}
+
+	return 0;
+};
+
+static int i2c_slave_eeprom_remove(struct i2c_client *client)
+{
+	struct eeprom_data *eeprom = i2c_get_clientdata(client);
+
+	i2c_slave_unregister(client);
+	sysfs_remove_bin_file(&client->dev.kobj, &eeprom->bin);
+
+	return 0;
+}
+
+static const struct i2c_device_id i2c_slave_eeprom_id[] = {
+	{ "slave-24c02", 2048 / 8 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id);
+
+static struct i2c_driver i2c_slave_eeprom_driver = {
+	.driver = {
+		.name = "i2c-slave-eeprom",
+	},
+	.probe = i2c_slave_eeprom_probe,
+	.remove = i2c_slave_eeprom_remove,
+	.id_table = i2c_slave_eeprom_id,
+};
+module_i2c_driver(i2c_slave_eeprom_driver);
+
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_DESCRIPTION("I2C slave mode EEPROM simulator");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-smbus.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-smbus.c
new file mode 100644
index 0000000..f9271c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-smbus.c
@@ -0,0 +1,248 @@
+/*
+ * i2c-smbus.c - SMBus extensions to the I2C protocol
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2010 Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+struct i2c_smbus_alert {
+	unsigned int		alert_edge_triggered:1;
+	int			irq;
+	struct work_struct	alert;
+	struct i2c_client	*ara;		/* Alert response address */
+};
+
+struct alert_data {
+	unsigned short		addr;
+	enum i2c_alert_protocol	type;
+	unsigned int		data;
+};
+
+/* If this is the alerting device, notify its driver */
+static int smbus_do_alert(struct device *dev, void *addrp)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	struct alert_data *data = addrp;
+	struct i2c_driver *driver;
+
+	if (!client || client->addr != data->addr)
+		return 0;
+	if (client->flags & I2C_CLIENT_TEN)
+		return 0;
+
+	/*
+	 * Drivers should either disable alerts, or provide at least
+	 * a minimal handler.  Lock so the driver won't change.
+	 */
+	device_lock(dev);
+	if (client->dev.driver) {
+		driver = to_i2c_driver(client->dev.driver);
+		if (driver->alert)
+			driver->alert(client, data->type, data->data);
+		else
+			dev_warn(&client->dev, "no driver alert()!\n");
+	} else
+		dev_dbg(&client->dev, "alert with no driver\n");
+	device_unlock(dev);
+
+	/* Stop iterating after we find the device */
+	return -EBUSY;
+}
+
+/*
+ * The alert IRQ handler needs to hand work off to a task which can issue
+ * SMBus calls, because those sleeping calls can't be made in IRQ context.
+ */
+static void smbus_alert(struct work_struct *work)
+{
+	struct i2c_smbus_alert *alert;
+	struct i2c_client *ara;
+	unsigned short prev_addr = 0;	/* Not a valid address */
+
+	alert = container_of(work, struct i2c_smbus_alert, alert);
+	ara = alert->ara;
+
+	for (;;) {
+		s32 status;
+		struct alert_data data;
+
+		/*
+		 * Devices with pending alerts reply in address order, low
+		 * to high, because of slave transmit arbitration.  After
+		 * responding, an SMBus device stops asserting SMBALERT#.
+		 *
+		 * Note that SMBus 2.0 reserves 10-bit addresses for future
+		 * use.  We neither handle them, nor try to use PEC here.
+		 */
+		status = i2c_smbus_read_byte(ara);
+		if (status < 0)
+			break;
+
+		data.data = status & 1;
+		data.addr = status >> 1;
+		data.type = I2C_PROTOCOL_SMBUS_ALERT;
+
+		if (data.addr == prev_addr) {
+			dev_warn(&ara->dev, "Duplicate SMBALERT# from dev "
+				"0x%02x, skipping\n", data.addr);
+			break;
+		}
+		dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
+			data.addr, data.data);
+
+		/* Notify driver for the device which issued the alert */
+		device_for_each_child(&ara->adapter->dev, &data,
+				      smbus_do_alert);
+		prev_addr = data.addr;
+	}
+
+	/* We handled all alerts; re-enable level-triggered IRQs */
+	if (!alert->alert_edge_triggered)
+		enable_irq(alert->irq);
+}
+
+static irqreturn_t smbalert_irq(int irq, void *d)
+{
+	struct i2c_smbus_alert *alert = d;
+
+	/* Disable level-triggered IRQs until we handle them */
+	if (!alert->alert_edge_triggered)
+		disable_irq_nosync(irq);
+
+	schedule_work(&alert->alert);
+	return IRQ_HANDLED;
+}
+
+/* Setup SMBALERT# infrastructure */
+static int smbalert_probe(struct i2c_client *ara,
+			  const struct i2c_device_id *id)
+{
+	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
+	struct i2c_smbus_alert *alert;
+	struct i2c_adapter *adapter = ara->adapter;
+	int res;
+
+	alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert),
+			     GFP_KERNEL);
+	if (!alert)
+		return -ENOMEM;
+
+	alert->alert_edge_triggered = setup->alert_edge_triggered;
+	alert->irq = setup->irq;
+	INIT_WORK(&alert->alert, smbus_alert);
+	alert->ara = ara;
+
+	if (setup->irq > 0) {
+		res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq,
+				       0, "smbus_alert", alert);
+		if (res)
+			return res;
+	}
+
+	i2c_set_clientdata(ara, alert);
+	dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n",
+		 setup->alert_edge_triggered ? "edge" : "level");
+
+	return 0;
+}
+
+/* IRQ and memory resources are managed so they are freed automatically */
+static int smbalert_remove(struct i2c_client *ara)
+{
+	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);
+
+	cancel_work_sync(&alert->alert);
+	return 0;
+}
+
+static const struct i2c_device_id smbalert_ids[] = {
+	{ "smbus_alert", 0 },
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, smbalert_ids);
+
+static struct i2c_driver smbalert_driver = {
+	.driver = {
+		.name	= "smbus_alert",
+	},
+	.probe		= smbalert_probe,
+	.remove		= smbalert_remove,
+	.id_table	= smbalert_ids,
+};
+
+/**
+ * i2c_setup_smbus_alert - Setup SMBus alert support
+ * @adapter: the target adapter
+ * @setup: setup data for the SMBus alert handler
+ * Context: can sleep
+ *
+ * Setup handling of the SMBus alert protocol on a given I2C bus segment.
+ *
+ * Handling can be done either through our IRQ handler, or by the
+ * adapter (from its handler, periodic polling, or whatever).
+ *
+ * NOTE that if we manage the IRQ, we *MUST* know if it's level or
+ * edge triggered in order to hand it to the workqueue correctly.
+ * If triggering the alert seems to wedge the system, you probably
+ * should have said it's level triggered.
+ *
+ * This returns the ara client, which should be saved for later use with
+ * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
+ * to indicate an error.
+ */
+struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
+					 struct i2c_smbus_alert_setup *setup)
+{
+	struct i2c_board_info ara_board_info = {
+		I2C_BOARD_INFO("smbus_alert", 0x0c),
+		.platform_data = setup,
+	};
+
+	return i2c_new_device(adapter, &ara_board_info);
+}
+EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
+
+/**
+ * i2c_handle_smbus_alert - Handle an SMBus alert
+ * @ara: the ARA client on the relevant adapter
+ * Context: can't sleep
+ *
+ * Helper function to be called from an I2C bus driver's interrupt
+ * handler. It will schedule the alert work, in turn calling the
+ * corresponding I2C device driver's alert function.
+ *
+ * It is assumed that ara is a valid i2c client previously returned by
+ * i2c_setup_smbus_alert().
+ */
+int i2c_handle_smbus_alert(struct i2c_client *ara)
+{
+	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);
+
+	return schedule_work(&alert->alert);
+}
+EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
+
+module_i2c_driver(smbalert_driver);
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("SMBus protocol extensions support");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/i2c-stub.c b/src/kernel/linux/v4.14/drivers/i2c/i2c-stub.c
new file mode 100644
index 0000000..4a9ad91
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/i2c-stub.c
@@ -0,0 +1,421 @@
+/*
+    i2c-stub.c - I2C/SMBus chip emulator
+
+    Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+    Copyright (C) 2007-2014 Jean Delvare <jdelvare@suse.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#define DEBUG 1
+#define pr_fmt(fmt) "i2c-stub: " fmt
+
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define MAX_CHIPS 10
+
+/*
+ * Support for I2C_FUNC_SMBUS_BLOCK_DATA is disabled by default and must
+ * be enabled explicitly by setting the I2C_FUNC_SMBUS_BLOCK_DATA bits
+ * in the 'functionality' module parameter.
+ */
+#define STUB_FUNC_DEFAULT \
+		(I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
+		 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
+		 I2C_FUNC_SMBUS_I2C_BLOCK)
+
+#define STUB_FUNC_ALL \
+		(STUB_FUNC_DEFAULT | I2C_FUNC_SMBUS_BLOCK_DATA)
+
+static unsigned short chip_addr[MAX_CHIPS];
+module_param_array(chip_addr, ushort, NULL, S_IRUGO);
+MODULE_PARM_DESC(chip_addr,
+		 "Chip addresses (up to 10, between 0x03 and 0x77)");
+
+static unsigned long functionality = STUB_FUNC_DEFAULT;
+module_param(functionality, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(functionality, "Override functionality bitfield");
+
+/* Some chips have banked register ranges */
+
+static u8 bank_reg[MAX_CHIPS];
+module_param_array(bank_reg, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_reg, "Bank register");
+
+static u8 bank_mask[MAX_CHIPS];
+module_param_array(bank_mask, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_mask, "Bank value mask");
+
+static u8 bank_start[MAX_CHIPS];
+module_param_array(bank_start, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_start, "First banked register");
+
+static u8 bank_end[MAX_CHIPS];
+module_param_array(bank_end, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_end, "Last banked register");
+
+struct smbus_block_data {
+	struct list_head node;
+	u8 command;
+	u8 len;
+	u8 block[I2C_SMBUS_BLOCK_MAX];
+};
+
+struct stub_chip {
+	u8 pointer;
+	u16 words[256];		/* Byte operations use the LSB as per SMBus
+				   specification */
+	struct list_head smbus_blocks;
+
+	/* For chips with banks, extra registers are allocated dynamically */
+	u8 bank_reg;
+	u8 bank_shift;
+	u8 bank_mask;
+	u8 bank_sel;		/* Currently selected bank */
+	u8 bank_start;
+	u8 bank_end;
+	u16 bank_size;
+	u16 *bank_words;	/* Room for bank_mask * bank_size registers */
+};
+
+static struct stub_chip *stub_chips;
+static int stub_chips_nr;
+
+static struct smbus_block_data *stub_find_block(struct device *dev,
+						struct stub_chip *chip,
+						u8 command, bool create)
+{
+	struct smbus_block_data *b, *rb = NULL;
+
+	list_for_each_entry(b, &chip->smbus_blocks, node) {
+		if (b->command == command) {
+			rb = b;
+			break;
+		}
+	}
+	if (rb == NULL && create) {
+		rb = devm_kzalloc(dev, sizeof(*rb), GFP_KERNEL);
+		if (rb == NULL)
+			return rb;
+		rb->command = command;
+		list_add(&rb->node, &chip->smbus_blocks);
+	}
+	return rb;
+}
+
+static u16 *stub_get_wordp(struct stub_chip *chip, u8 offset)
+{
+	if (chip->bank_sel &&
+	    offset >= chip->bank_start && offset <= chip->bank_end)
+		return chip->bank_words +
+		       (chip->bank_sel - 1) * chip->bank_size +
+		       offset - chip->bank_start;
+	else
+		return chip->words + offset;
+}
+
+/* Return negative errno on error. */
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+	char read_write, u8 command, int size, union i2c_smbus_data *data)
+{
+	s32 ret;
+	int i, len;
+	struct stub_chip *chip = NULL;
+	struct smbus_block_data *b;
+	u16 *wordp;
+
+	/* Search for the right chip */
+	for (i = 0; i < stub_chips_nr; i++) {
+		if (addr == chip_addr[i]) {
+			chip = stub_chips + i;
+			break;
+		}
+	}
+	if (!chip)
+		return -ENODEV;
+
+	switch (size) {
+
+	case I2C_SMBUS_QUICK:
+		dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			chip->pointer = command;
+			dev_dbg(&adap->dev,
+				"smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+				addr, command);
+		} else {
+			wordp = stub_get_wordp(chip, chip->pointer++);
+			data->byte = *wordp & 0xff;
+			dev_dbg(&adap->dev,
+				"smbus byte - addr 0x%02x, read  0x%02x.\n",
+				addr, data->byte);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		wordp = stub_get_wordp(chip, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			*wordp &= 0xff00;
+			*wordp |= data->byte;
+			dev_dbg(&adap->dev,
+				"smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+				addr, data->byte, command);
+
+			/* Set the bank as needed */
+			if (chip->bank_words && command == chip->bank_reg) {
+				chip->bank_sel =
+					(data->byte >> chip->bank_shift)
+					& chip->bank_mask;
+				dev_dbg(&adap->dev,
+					"switching to bank %u.\n",
+					chip->bank_sel);
+			}
+		} else {
+			data->byte = *wordp & 0xff;
+			dev_dbg(&adap->dev,
+				"smbus byte data - addr 0x%02x, read  0x%02x at 0x%02x.\n",
+				addr, data->byte, command);
+		}
+		chip->pointer = command + 1;
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		wordp = stub_get_wordp(chip, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			*wordp = data->word;
+			dev_dbg(&adap->dev,
+				"smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+				addr, data->word, command);
+		} else {
+			data->word = *wordp;
+			dev_dbg(&adap->dev,
+				"smbus word data - addr 0x%02x, read  0x%04x at 0x%02x.\n",
+				addr, data->word, command);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/*
+		 * We ignore banks here, because banked chips don't use I2C
+		 * block transfers
+		 */
+		if (data->block[0] > 256 - command)	/* Avoid overrun */
+			data->block[0] = 256 - command;
+		len = data->block[0];
+		if (read_write == I2C_SMBUS_WRITE) {
+			for (i = 0; i < len; i++) {
+				chip->words[command + i] &= 0xff00;
+				chip->words[command + i] |= data->block[1 + i];
+			}
+			dev_dbg(&adap->dev,
+				"i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+				addr, len, command);
+		} else {
+			for (i = 0; i < len; i++) {
+				data->block[1 + i] =
+					chip->words[command + i] & 0xff;
+			}
+			dev_dbg(&adap->dev,
+				"i2c block data - addr 0x%02x, read  %d bytes at 0x%02x.\n",
+				addr, len, command);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		/*
+		 * We ignore banks here, because chips typically don't use both
+		 * banks and SMBus block transfers
+		 */
+		b = stub_find_block(&adap->dev, chip, command, false);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) {
+				ret = -EINVAL;
+				break;
+			}
+			if (b == NULL) {
+				b = stub_find_block(&adap->dev, chip, command,
+						    true);
+				if (b == NULL) {
+					ret = -ENOMEM;
+					break;
+				}
+			}
+			/* Largest write sets read block length */
+			if (len > b->len)
+				b->len = len;
+			for (i = 0; i < len; i++)
+				b->block[i] = data->block[i + 1];
+			/* update for byte and word commands */
+			chip->words[command] = (b->block[0] << 8) | b->len;
+			dev_dbg(&adap->dev,
+				"smbus block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+				addr, len, command);
+		} else {
+			if (b == NULL) {
+				dev_dbg(&adap->dev,
+					"SMBus block read command without prior block write not supported\n");
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			len = b->len;
+			data->block[0] = len;
+			for (i = 0; i < len; i++)
+				data->block[i + 1] = b->block[i];
+			dev_dbg(&adap->dev,
+				"smbus block data - addr 0x%02x, read  %d bytes at 0x%02x.\n",
+				addr, len, command);
+		}
+
+		ret = 0;
+		break;
+
+	default:
+		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
+		ret = -EOPNOTSUPP;
+		break;
+	} /* switch (size) */
+
+	return ret;
+}
+
+static u32 stub_func(struct i2c_adapter *adapter)
+{
+	return STUB_FUNC_ALL & functionality;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.functionality	= stub_func,
+	.smbus_xfer	= stub_xfer,
+};
+
+static struct i2c_adapter stub_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+	.name		= "SMBus stub driver",
+};
+
+static int __init i2c_stub_allocate_banks(int i)
+{
+	struct stub_chip *chip = stub_chips + i;
+
+	chip->bank_reg = bank_reg[i];
+	chip->bank_start = bank_start[i];
+	chip->bank_end = bank_end[i];
+	chip->bank_size = bank_end[i] - bank_start[i] + 1;
+
+	/* We assume that all bits in the mask are contiguous */
+	chip->bank_mask = bank_mask[i];
+	while (!(chip->bank_mask & 1)) {
+		chip->bank_shift++;
+		chip->bank_mask >>= 1;
+	}
+
+	chip->bank_words = kzalloc(chip->bank_mask * chip->bank_size *
+				   sizeof(u16), GFP_KERNEL);
+	if (!chip->bank_words)
+		return -ENOMEM;
+
+	pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
+		 chip->bank_mask, chip->bank_size, chip->bank_start,
+		 chip->bank_end);
+
+	return 0;
+}
+
+static void i2c_stub_free(void)
+{
+	int i;
+
+	for (i = 0; i < stub_chips_nr; i++)
+		kfree(stub_chips[i].bank_words);
+	kfree(stub_chips);
+}
+
+static int __init i2c_stub_init(void)
+{
+	int i, ret;
+
+	if (!chip_addr[0]) {
+		pr_err("Please specify a chip address\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+		if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
+			pr_err("Invalid chip address 0x%02x\n",
+			       chip_addr[i]);
+			return -EINVAL;
+		}
+
+		pr_info("Virtual chip at 0x%02x\n", chip_addr[i]);
+	}
+
+	/* Allocate memory for all chips at once */
+	stub_chips_nr = i;
+	stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip),
+			     GFP_KERNEL);
+	if (!stub_chips)
+		return -ENOMEM;
+
+	for (i = 0; i < stub_chips_nr; i++) {
+		INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
+
+		/* Allocate extra memory for banked register ranges */
+		if (bank_mask[i]) {
+			ret = i2c_stub_allocate_banks(i);
+			if (ret)
+				goto fail_free;
+		}
+	}
+
+	ret = i2c_add_adapter(&stub_adapter);
+	if (ret)
+		goto fail_free;
+
+	return 0;
+
+ fail_free:
+	i2c_stub_free();
+	return ret;
+}
+
+static void __exit i2c_stub_exit(void)
+{
+	i2c_del_adapter(&stub_adapter);
+	i2c_stub_free();
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("I2C stub driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_stub_init);
+module_exit(i2c_stub_exit);
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/Kconfig b/src/kernel/linux/v4.14/drivers/i2c/muxes/Kconfig
new file mode 100644
index 0000000..0f5c8fc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,121 @@
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+	depends on I2C_MUX
+
+config I2C_ARB_GPIO_CHALLENGE
+	tristate "GPIO-based I2C arbitration"
+	depends on GPIOLIB || COMPILE_TEST
+	depends on OF || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for an
+	  I2C multimaster arbitration scheme using GPIOs and a challenge &
+	  response mechanism where masters have to claim the bus by asserting
+	  a GPIO.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-arb-gpio-challenge.
+
+config I2C_MUX_GPIO
+	tristate "GPIO-based I2C multiplexer"
+	depends on GPIOLIB
+	help
+	  If you say yes to this option, support will be included for a
+	  GPIO based I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  through GPIO pins.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-gpio.
+
+config I2C_MUX_GPMUX
+	tristate "General Purpose I2C multiplexer"
+	select MULTIPLEXER
+	depends on OF || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for a
+	  general purpose I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which in turn is controlled
+	  by a MUX-controller from the MUX subsystem.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-gpmux.
+
+config I2C_MUX_LTC4306
+	tristate "LTC LTC4306/5 I2C multiplexer"
+	select GPIOLIB
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Analog Devices
+	  LTC4306 or LTC4305 I2C mux/switch devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-ltc4306.
+
+config I2C_MUX_PCA9541
+	tristate "NXP PCA9541 I2C Master Selector"
+	help
+	  If you say yes here you get support for the NXP PCA9541
+	  I2C Master Selector.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-pca9541.
+
+config I2C_MUX_PCA954x
+	tristate "Philips PCA954x I2C Mux/switches"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  If you say yes here you get support for the Philips PCA954x
+	  I2C mux/switch devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-pca954x.
+
+config I2C_MUX_PINCTRL
+	tristate "pinctrl-based I2C multiplexer"
+	depends on PINCTRL
+	depends on OF || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for an I2C
+	  multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+	  This is useful for SoCs whose I2C module's signals can be routed to
+	  different sets of pins at run-time.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-mux-pinctrl.
+
+config I2C_MUX_REG
+	tristate "Register-based I2C multiplexer"
+	depends on HAS_IOMEM
+	help
+	  If you say yes to this option, support will be included for a
+	  register based I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  by a single register.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-reg.
+
+config I2C_DEMUX_PINCTRL
+	tristate "pinctrl-based I2C demultiplexer"
+	depends on PINCTRL && OF
+	select OF_DYNAMIC
+	help
+	  If you say yes to this option, support will be included for an I2C
+	  demultiplexer that uses the pinctrl subsystem. This is useful if you
+	  want to change the I2C master at run-time depending on features.
+
+config I2C_MUX_MLXCPLD
+        tristate "Mellanox CPLD based I2C multiplexer"
+        help
+          If you say yes to this option, support will be included for a
+          CPLD based I2C multiplexer. This driver provides access to
+          I2C busses connected through a MUX, which is controlled
+          by a CPLD register.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-mux-mlxcpld.
+
+endmenu
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/Makefile b/src/kernel/linux/v4.14/drivers/i2c/muxes/Makefile
new file mode 100644
index 0000000..6d9d865
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for multiplexer I2C chip drivers.
+
+obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE)	+= i2c-arb-gpio-challenge.o
+
+obj-$(CONFIG_I2C_DEMUX_PINCTRL)		+= i2c-demux-pinctrl.o
+
+obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_GPMUX)	+= i2c-mux-gpmux.o
+obj-$(CONFIG_I2C_MUX_LTC4306)	+= i2c-mux-ltc4306.o
+obj-$(CONFIG_I2C_MUX_MLXCPLD)	+= i2c-mux-mlxcpld.o
+obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
+obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PINCTRL)	+= i2c-mux-pinctrl.o
+obj-$(CONFIG_I2C_MUX_REG)	+= i2c-mux-reg.o
+
+ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
new file mode 100644
index 0000000..812b8cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -0,0 +1,240 @@
+/*
+ * GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+
+/**
+ * struct i2c_arbitrator_data - Driver data for I2C arbitrator
+ *
+ * @our_gpio: GPIO we'll use to claim.
+ * @our_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO ==
+ *   this then consider it released.
+ * @their_gpio: GPIO that the other side will use to claim.
+ * @their_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO ==
+ *   this then consider it released.
+ * @slew_delay_us: microseconds to wait for a GPIO to go high.
+ * @wait_retry_us: we'll attempt another claim after this many microseconds.
+ * @wait_free_us: we'll give up after this many microseconds.
+ */
+
+struct i2c_arbitrator_data {
+	int our_gpio;
+	int our_gpio_release;
+	int their_gpio;
+	int their_gpio_release;
+	unsigned int slew_delay_us;
+	unsigned int wait_retry_us;
+	unsigned int wait_free_us;
+};
+
+
+/**
+ * i2c_arbitrator_select - claim the I2C bus
+ *
+ * Use the GPIO-based signalling protocol; return -EBUSY if we fail.
+ */
+static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
+	unsigned long stop_retry, stop_time;
+
+	/* Start a round of trying to claim the bus */
+	stop_time = jiffies + usecs_to_jiffies(arb->wait_free_us) + 1;
+	do {
+		/* Indicate that we want to claim the bus */
+		gpio_set_value(arb->our_gpio, !arb->our_gpio_release);
+		udelay(arb->slew_delay_us);
+
+		/* Wait for the other master to release it */
+		stop_retry = jiffies + usecs_to_jiffies(arb->wait_retry_us) + 1;
+		while (time_before(jiffies, stop_retry)) {
+			int gpio_val = !!gpio_get_value(arb->their_gpio);
+
+			if (gpio_val == arb->their_gpio_release) {
+				/* We got it, so return */
+				return 0;
+			}
+
+			usleep_range(50, 200);
+		}
+
+		/* It didn't release, so give up, wait, and try again */
+		gpio_set_value(arb->our_gpio, arb->our_gpio_release);
+
+		usleep_range(arb->wait_retry_us, arb->wait_retry_us * 2);
+	} while (time_before(jiffies, stop_time));
+
+	/* Give up, release our claim */
+	gpio_set_value(arb->our_gpio, arb->our_gpio_release);
+	udelay(arb->slew_delay_us);
+	dev_err(muxc->dev, "Could not claim bus, timeout\n");
+	return -EBUSY;
+}
+
+/**
+ * i2c_arbitrator_deselect - release the I2C bus
+ *
+ * Release the I2C bus using the GPIO-based signalling protocol.
+ */
+static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
+
+	/* Release the bus and wait for the other master to notice */
+	gpio_set_value(arb->our_gpio, arb->our_gpio_release);
+	udelay(arb->slew_delay_us);
+
+	return 0;
+}
+
+static int i2c_arbitrator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_mux_core *muxc;
+	struct i2c_arbitrator_data *arb;
+	enum of_gpio_flags gpio_flags;
+	unsigned long out_init;
+	int ret;
+
+	/* We only support probing from device tree; no platform_data */
+	if (!np) {
+		dev_err(dev, "Cannot find device tree node\n");
+		return -ENODEV;
+	}
+	if (dev_get_platdata(dev)) {
+		dev_err(dev, "Platform data is not supported\n");
+		return -EINVAL;
+	}
+
+	muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), I2C_MUX_ARBITRATOR,
+			     i2c_arbitrator_select, i2c_arbitrator_deselect);
+	if (!muxc)
+		return -ENOMEM;
+	arb = i2c_mux_priv(muxc);
+
+	platform_set_drvdata(pdev, muxc);
+
+	/* Request GPIOs */
+	ret = of_get_named_gpio_flags(np, "our-claim-gpio", 0, &gpio_flags);
+	if (!gpio_is_valid(ret)) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Error getting our-claim-gpio\n");
+		return ret;
+	}
+	arb->our_gpio = ret;
+	arb->our_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW);
+	out_init = (gpio_flags & OF_GPIO_ACTIVE_LOW) ?
+		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+	ret = devm_gpio_request_one(dev, arb->our_gpio, out_init,
+				    "our-claim-gpio");
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Error requesting our-claim-gpio\n");
+		return ret;
+	}
+
+	ret = of_get_named_gpio_flags(np, "their-claim-gpios", 0, &gpio_flags);
+	if (!gpio_is_valid(ret)) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Error getting their-claim-gpio\n");
+		return ret;
+	}
+	arb->their_gpio = ret;
+	arb->their_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW);
+	ret = devm_gpio_request_one(dev, arb->their_gpio, GPIOF_IN,
+				    "their-claim-gpio");
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Error requesting their-claim-gpio\n");
+		return ret;
+	}
+
+	/* At the moment we only support a single two master (us + 1 other) */
+	if (gpio_is_valid(of_get_named_gpio(np, "their-claim-gpios", 1))) {
+		dev_err(dev, "Only one other master is supported\n");
+		return -EINVAL;
+	}
+
+	/* Arbitration parameters */
+	if (of_property_read_u32(np, "slew-delay-us", &arb->slew_delay_us))
+		arb->slew_delay_us = 10;
+	if (of_property_read_u32(np, "wait-retry-us", &arb->wait_retry_us))
+		arb->wait_retry_us = 3000;
+	if (of_property_read_u32(np, "wait-free-us", &arb->wait_free_us))
+		arb->wait_free_us = 50000;
+
+	/* Find our parent */
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return -EINVAL;
+	}
+	muxc->parent = of_get_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!muxc->parent) {
+		dev_err(dev, "Cannot find parent bus\n");
+		return -EPROBE_DEFER;
+	}
+
+	/* Actually add the mux adapter */
+	ret = i2c_mux_add_adapter(muxc, 0, 0, 0);
+	if (ret)
+		i2c_put_adapter(muxc->parent);
+
+	return ret;
+}
+
+static int i2c_arbitrator_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+	return 0;
+}
+
+static const struct of_device_id i2c_arbitrator_of_match[] = {
+	{ .compatible = "i2c-arb-gpio-challenge", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_arbitrator_of_match);
+
+static struct platform_driver i2c_arbitrator_driver = {
+	.probe	= i2c_arbitrator_probe,
+	.remove	= i2c_arbitrator_remove,
+	.driver	= {
+		.name	= "i2c-arb-gpio-challenge",
+		.of_match_table = i2c_arbitrator_of_match,
+	},
+};
+
+module_platform_driver(i2c_arbitrator_driver);
+
+MODULE_DESCRIPTION("GPIO-based I2C Arbitration");
+MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-arb-gpio-challenge");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-demux-pinctrl.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-demux-pinctrl.c
new file mode 100644
index 0000000..0c637ae
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -0,0 +1,319 @@
+/*
+ * Pinctrl based I2C DeMultiplexer
+ *
+ * Copyright (C) 2015-16 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 by Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * See the bindings doc for DTS setup and the sysfs doc for usage information.
+ * (look for filenames containing 'i2c-demux-pinctrl' in Documentation/)
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct i2c_demux_pinctrl_chan {
+	struct device_node *parent_np;
+	struct i2c_adapter *parent_adap;
+	struct of_changeset chgset;
+};
+
+struct i2c_demux_pinctrl_priv {
+	int cur_chan;
+	int num_chan;
+	struct device *dev;
+	const char *bus_name;
+	struct i2c_adapter cur_adap;
+	struct i2c_algorithm algo;
+	struct i2c_demux_pinctrl_chan chan[];
+};
+
+static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+	return __i2c_transfer(parent, msgs, num);
+}
+
+static u32 i2c_demux_functionality(struct i2c_adapter *adap)
+{
+	struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+	return parent->algo->functionality(parent);
+}
+
+static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+	struct i2c_adapter *adap;
+	struct pinctrl *p;
+	int ret;
+
+	ret = of_changeset_apply(&priv->chan[new_chan].chgset);
+	if (ret)
+		goto err;
+
+	adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
+	if (!adap) {
+		ret = -ENODEV;
+		goto err_with_revert;
+	}
+
+	/*
+	 * Check if there are pinctrl states at all. Note: we cant' use
+	 * devm_pinctrl_get_select() because we need to distinguish between
+	 * the -ENODEV from devm_pinctrl_get() and pinctrl_lookup_state().
+	 */
+	p = devm_pinctrl_get(adap->dev.parent);
+	if (IS_ERR(p)) {
+		ret = PTR_ERR(p);
+		/* continue if just no pinctrl states (e.g. i2c-gpio), otherwise exit */
+		if (ret != -ENODEV)
+			goto err_with_put;
+	} else {
+		/* there are states. check and use them */
+		struct pinctrl_state *s = pinctrl_lookup_state(p, priv->bus_name);
+
+		if (IS_ERR(s)) {
+			ret = PTR_ERR(s);
+			goto err_with_put;
+		}
+		ret = pinctrl_select_state(p, s);
+		if (ret < 0)
+			goto err_with_put;
+	}
+
+	priv->chan[new_chan].parent_adap = adap;
+	priv->cur_chan = new_chan;
+
+	/* Now fill out current adapter structure. cur_chan must be up to date */
+	priv->algo.master_xfer = i2c_demux_master_xfer;
+	priv->algo.functionality = i2c_demux_functionality;
+
+	snprintf(priv->cur_adap.name, sizeof(priv->cur_adap.name),
+		 "i2c-demux (master i2c-%d)", i2c_adapter_id(adap));
+	priv->cur_adap.owner = THIS_MODULE;
+	priv->cur_adap.algo = &priv->algo;
+	priv->cur_adap.algo_data = priv;
+	priv->cur_adap.dev.parent = priv->dev;
+	priv->cur_adap.class = adap->class;
+	priv->cur_adap.retries = adap->retries;
+	priv->cur_adap.timeout = adap->timeout;
+	priv->cur_adap.quirks = adap->quirks;
+	priv->cur_adap.dev.of_node = priv->dev->of_node;
+	ret = i2c_add_adapter(&priv->cur_adap);
+	if (ret < 0)
+		goto err_with_put;
+
+	return 0;
+
+ err_with_put:
+	i2c_put_adapter(adap);
+ err_with_revert:
+	of_changeset_revert(&priv->chan[new_chan].chgset);
+ err:
+	dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret);
+	priv->cur_chan = -EINVAL;
+	return ret;
+}
+
+static int i2c_demux_deactivate_master(struct i2c_demux_pinctrl_priv *priv)
+{
+	int ret, cur = priv->cur_chan;
+
+	if (cur < 0)
+		return 0;
+
+	i2c_del_adapter(&priv->cur_adap);
+	i2c_put_adapter(priv->chan[cur].parent_adap);
+
+	ret = of_changeset_revert(&priv->chan[cur].chgset);
+
+	priv->chan[cur].parent_adap = NULL;
+	priv->cur_chan = -EINVAL;
+
+	return ret;
+}
+
+static int i2c_demux_change_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+	int ret;
+
+	if (new_chan == priv->cur_chan)
+		return 0;
+
+	ret = i2c_demux_deactivate_master(priv);
+	if (ret)
+		return ret;
+
+	return i2c_demux_activate_master(priv, new_chan);
+}
+
+static ssize_t available_masters_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+	int count = 0, i;
+
+	for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%pOF%c",
+				   i, priv->chan[i].parent_np,
+				   i == priv->num_chan - 1 ? '\n' : ' ');
+
+	return count;
+}
+static DEVICE_ATTR_RO(available_masters);
+
+static ssize_t current_master_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", priv->cur_chan);
+}
+
+static ssize_t current_master_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val >= priv->num_chan)
+		return -EINVAL;
+
+	ret = i2c_demux_change_master(priv, val);
+
+	return ret < 0 ? ret : count;
+}
+static DEVICE_ATTR_RW(current_master);
+
+static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct i2c_demux_pinctrl_priv *priv;
+	struct property *props;
+	int num_chan, i, j, err;
+
+	num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL);
+	if (num_chan < 2) {
+		dev_err(&pdev->dev, "Need at least two I2C masters to switch\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv)
+			   + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL);
+
+	props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL);
+
+	if (!priv || !props)
+		return -ENOMEM;
+
+	err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
+	if (err)
+		return err;
+
+	for (i = 0; i < num_chan; i++) {
+		struct device_node *adap_np;
+
+		adap_np = of_parse_phandle(np, "i2c-parent", i);
+		if (!adap_np) {
+			dev_err(&pdev->dev, "can't get phandle for parent %d\n", i);
+			err = -ENOENT;
+			goto err_rollback;
+		}
+		priv->chan[i].parent_np = adap_np;
+
+		props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL);
+		props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL);
+		props[i].length = 3;
+
+		of_changeset_init(&priv->chan[i].chgset);
+		of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
+	}
+
+	priv->num_chan = num_chan;
+	priv->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, priv);
+
+	/* switch to first parent as active master */
+	i2c_demux_activate_master(priv, 0);
+
+	err = device_create_file(&pdev->dev, &dev_attr_available_masters);
+	if (err)
+		goto err_rollback;
+
+	err = device_create_file(&pdev->dev, &dev_attr_current_master);
+	if (err)
+		goto err_rollback_available;
+
+	return 0;
+
+err_rollback_available:
+	device_remove_file(&pdev->dev, &dev_attr_available_masters);
+err_rollback:
+	i2c_demux_deactivate_master(priv);
+	for (j = 0; j < i; j++) {
+		of_node_put(priv->chan[j].parent_np);
+		of_changeset_destroy(&priv->chan[j].chgset);
+	}
+
+	return err;
+}
+
+static int i2c_demux_pinctrl_remove(struct platform_device *pdev)
+{
+	struct i2c_demux_pinctrl_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	device_remove_file(&pdev->dev, &dev_attr_current_master);
+	device_remove_file(&pdev->dev, &dev_attr_available_masters);
+
+	i2c_demux_deactivate_master(priv);
+
+	for (i = 0; i < priv->num_chan; i++) {
+		of_node_put(priv->chan[i].parent_np);
+		of_changeset_destroy(&priv->chan[i].chgset);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id i2c_demux_pinctrl_of_match[] = {
+	{ .compatible = "i2c-demux-pinctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_demux_pinctrl_of_match);
+
+static struct platform_driver i2c_demux_pinctrl_driver = {
+	.driver	= {
+		.name = "i2c-demux-pinctrl",
+		.of_match_table = i2c_demux_pinctrl_of_match,
+	},
+	.probe	= i2c_demux_pinctrl_probe,
+	.remove	= i2c_demux_pinctrl_remove,
+};
+module_platform_driver(i2c_demux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C demux driver");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-demux-pinctrl");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpio.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpio.c
new file mode 100644
index 0000000..1a9973e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -0,0 +1,305 @@
+/*
+ * I2C multiplexer using GPIO API
+ *
+ * Peter Korsgaard <peter.korsgaard@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include "../../gpio/gpiolib.h"
+#include <linux/of_gpio.h>
+
+struct gpiomux {
+	struct i2c_mux_gpio_platform_data data;
+	unsigned gpio_base;
+	struct gpio_desc **gpios;
+	int *values;
+};
+
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
+{
+	int i;
+
+	for (i = 0; i < mux->data.n_gpios; i++)
+		mux->values[i] = (val >> i) & 1;
+
+	gpiod_set_array_value_cansleep(mux->data.n_gpios,
+				       mux->gpios, mux->values);
+}
+
+static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct gpiomux *mux = i2c_mux_priv(muxc);
+
+	i2c_mux_gpio_set(mux, chan);
+
+	return 0;
+}
+
+static int i2c_mux_gpio_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct gpiomux *mux = i2c_mux_priv(muxc);
+
+	i2c_mux_gpio_set(mux, mux->data.idle);
+
+	return 0;
+}
+
+static int match_gpio_chip_by_label(struct gpio_chip *chip,
+					      void *data)
+{
+	return !strcmp(chip->label, data);
+}
+
+#ifdef CONFIG_OF
+static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
+					struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *adapter_np, *child;
+	struct i2c_adapter *adapter;
+	unsigned *values, *gpios;
+	int i = 0, ret;
+
+	if (!np)
+		return -ENODEV;
+
+	adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!adapter_np) {
+		dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
+		return -ENODEV;
+	}
+	adapter = of_find_i2c_adapter_by_node(adapter_np);
+	of_node_put(adapter_np);
+	if (!adapter)
+		return -EPROBE_DEFER;
+
+	mux->data.parent = i2c_adapter_id(adapter);
+	put_device(&adapter->dev);
+
+	mux->data.n_values = of_get_child_count(np);
+
+	values = devm_kzalloc(&pdev->dev,
+			      sizeof(*mux->data.values) * mux->data.n_values,
+			      GFP_KERNEL);
+	if (!values) {
+		dev_err(&pdev->dev, "Cannot allocate values array");
+		return -ENOMEM;
+	}
+
+	for_each_child_of_node(np, child) {
+		of_property_read_u32(child, "reg", values + i);
+		i++;
+	}
+	mux->data.values = values;
+
+	if (of_property_read_u32(np, "idle-state", &mux->data.idle))
+		mux->data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+	mux->data.n_gpios = of_gpio_named_count(np, "mux-gpios");
+	if (mux->data.n_gpios < 0) {
+		dev_err(&pdev->dev, "Missing mux-gpios property in the DT.\n");
+		return -EINVAL;
+	}
+
+	gpios = devm_kzalloc(&pdev->dev,
+			     sizeof(*mux->data.gpios) * mux->data.n_gpios, GFP_KERNEL);
+	if (!gpios) {
+		dev_err(&pdev->dev, "Cannot allocate gpios array");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < mux->data.n_gpios; i++) {
+		ret = of_get_named_gpio(np, "mux-gpios", i);
+		if (ret < 0)
+			return ret;
+		gpios[i] = ret;
+	}
+
+	mux->data.gpios = gpios;
+
+	return 0;
+}
+#else
+static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
+					struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static int i2c_mux_gpio_probe(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc;
+	struct gpiomux *mux;
+	struct i2c_adapter *parent;
+	struct i2c_adapter *root;
+	unsigned initial_state, gpio_base;
+	int i, ret;
+
+	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	if (!dev_get_platdata(&pdev->dev)) {
+		ret = i2c_mux_gpio_probe_dt(mux, pdev);
+		if (ret < 0)
+			return ret;
+	} else {
+		memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+			sizeof(mux->data));
+	}
+
+	/*
+	 * If a GPIO chip name is provided, the GPIO pin numbers provided are
+	 * relative to its base GPIO number. Otherwise they are absolute.
+	 */
+	if (mux->data.gpio_chip) {
+		struct gpio_chip *gpio;
+
+		gpio = gpiochip_find(mux->data.gpio_chip,
+				     match_gpio_chip_by_label);
+		if (!gpio)
+			return -EPROBE_DEFER;
+
+		gpio_base = gpio->base;
+	} else {
+		gpio_base = 0;
+	}
+
+	parent = i2c_get_adapter(mux->data.parent);
+	if (!parent)
+		return -EPROBE_DEFER;
+
+	muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values,
+			     mux->data.n_gpios * sizeof(*mux->gpios) +
+			     mux->data.n_gpios * sizeof(*mux->values), 0,
+			     i2c_mux_gpio_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto alloc_failed;
+	}
+	mux->gpios = muxc->priv;
+	mux->values = (int *)(mux->gpios + mux->data.n_gpios);
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	root = i2c_root_adapter(&parent->dev);
+
+	muxc->mux_locked = true;
+	mux->gpio_base = gpio_base;
+
+	if (mux->data.idle != I2C_MUX_GPIO_NO_IDLE) {
+		initial_state = mux->data.idle;
+		muxc->deselect = i2c_mux_gpio_deselect;
+	} else {
+		initial_state = mux->data.values[0];
+	}
+
+	for (i = 0; i < mux->data.n_gpios; i++) {
+		struct device *gpio_dev;
+		struct gpio_desc *gpio_desc;
+
+		ret = gpio_request(gpio_base + mux->data.gpios[i], "i2c-mux-gpio");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to request GPIO %d\n",
+				mux->data.gpios[i]);
+			goto err_request_gpio;
+		}
+
+		ret = gpio_direction_output(gpio_base + mux->data.gpios[i],
+					    initial_state & (1 << i));
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to set direction of GPIO %d to output\n",
+				mux->data.gpios[i]);
+			i++;	/* gpio_request above succeeded, so must free */
+			goto err_request_gpio;
+		}
+
+		gpio_desc = gpio_to_desc(gpio_base + mux->data.gpios[i]);
+		mux->gpios[i] = gpio_desc;
+
+		if (!muxc->mux_locked)
+			continue;
+
+		gpio_dev = &gpio_desc->gdev->dev;
+		muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
+	}
+
+	if (muxc->mux_locked)
+		dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
+	for (i = 0; i < mux->data.n_values; i++) {
+		u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
+		unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
+
+		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+		if (ret)
+			goto add_adapter_failed;
+	}
+
+	dev_info(&pdev->dev, "%d port mux on %s adapter\n",
+		 mux->data.n_values, parent->name);
+
+	return 0;
+
+add_adapter_failed:
+	i2c_mux_del_adapters(muxc);
+	i = mux->data.n_gpios;
+err_request_gpio:
+	for (; i > 0; i--)
+		gpio_free(gpio_base + mux->data.gpios[i - 1]);
+alloc_failed:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_gpio_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+	struct gpiomux *mux = i2c_mux_priv(muxc);
+	int i;
+
+	i2c_mux_del_adapters(muxc);
+
+	for (i = 0; i < mux->data.n_gpios; i++)
+		gpio_free(mux->gpio_base + mux->data.gpios[i]);
+
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_gpio_of_match[] = {
+	{ .compatible = "i2c-mux-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_gpio_of_match);
+
+static struct platform_driver i2c_mux_gpio_driver = {
+	.probe	= i2c_mux_gpio_probe,
+	.remove	= i2c_mux_gpio_remove,
+	.driver	= {
+		.name	= "i2c-mux-gpio",
+		.of_match_table = i2c_mux_gpio_of_match,
+	},
+};
+
+module_platform_driver(i2c_mux_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
+MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-mux-gpio");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpmux.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpmux.c
new file mode 100644
index 0000000..92cf5f4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-gpmux.c
@@ -0,0 +1,173 @@
+/*
+ * General Purpose I2C multiplexer
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct mux {
+	struct mux_control *control;
+
+	bool do_not_deselect;
+};
+
+static int i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+	int ret;
+
+	ret = mux_control_select(mux->control, chan);
+	mux->do_not_deselect = ret < 0;
+
+	return ret;
+}
+
+static int i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+
+	if (mux->do_not_deselect)
+		return 0;
+
+	return mux_control_deselect(mux->control);
+}
+
+static struct i2c_adapter *mux_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_find_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
+static const struct of_device_id i2c_mux_of_match[] = {
+	{ .compatible = "i2c-mux", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_of_match);
+
+static int i2c_mux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	struct i2c_mux_core *muxc;
+	struct mux *mux;
+	struct i2c_adapter *parent;
+	int children;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	mux->control = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(mux->control)) {
+		if (PTR_ERR(mux->control) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get control-mux\n");
+		return PTR_ERR(mux->control);
+	}
+
+	parent = mux_parent_adapter(dev);
+	if (IS_ERR(parent)) {
+		if (PTR_ERR(parent) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get i2c-parent adapter\n");
+		return PTR_ERR(parent);
+	}
+
+	children = of_get_child_count(np);
+
+	muxc = i2c_mux_alloc(parent, dev, children, 0, 0,
+			     i2c_mux_select, i2c_mux_deselect);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_parent;
+	}
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	muxc->mux_locked = of_property_read_bool(np, "mux-locked");
+
+	for_each_child_of_node(np, child) {
+		u32 chan;
+
+		ret = of_property_read_u32(child, "reg", &chan);
+		if (ret < 0) {
+			dev_err(dev, "no reg property for node '%s'\n",
+				child->name);
+			goto err_children;
+		}
+
+		if (chan >= mux_control_states(mux->control)) {
+			dev_err(dev, "invalid reg %u\n", chan);
+			ret = -EINVAL;
+			goto err_children;
+		}
+
+		ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
+		if (ret)
+			goto err_children;
+	}
+
+	dev_info(dev, "%d-port mux on %s adapter\n", children, parent->name);
+
+	return 0;
+
+err_children:
+	i2c_mux_del_adapters(muxc);
+err_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static struct platform_driver i2c_mux_driver = {
+	.probe	= i2c_mux_probe,
+	.remove	= i2c_mux_remove,
+	.driver	= {
+		.name	= "i2c-mux-gpmux",
+		.of_match_table = i2c_mux_of_match,
+	},
+};
+module_platform_driver(i2c_mux_driver);
+
+MODULE_DESCRIPTION("General Purpose I2C multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-ltc4306.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-ltc4306.c
new file mode 100644
index 0000000..311b1cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-ltc4306.c
@@ -0,0 +1,322 @@
+/*
+ * Linear Technology LTC4306 and LTC4305 I2C multiplexer/switch
+ *
+ * Copyright (C) 2017 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ *
+ * Based on: i2c-mux-pca954x.c
+ *
+ * Datasheet: http://cds.linear.com/docs/en/datasheet/4306.pdf
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c-mux.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define LTC4305_MAX_NCHANS 2
+#define LTC4306_MAX_NCHANS 4
+
+#define LTC_REG_STATUS	0x0
+#define LTC_REG_CONFIG	0x1
+#define LTC_REG_MODE	0x2
+#define LTC_REG_SWITCH	0x3
+
+#define LTC_DOWNSTREAM_ACCL_EN	BIT(6)
+#define LTC_UPSTREAM_ACCL_EN	BIT(7)
+
+#define LTC_GPIO_ALL_INPUT	0xC0
+#define LTC_SWITCH_MASK		0xF0
+
+enum ltc_type {
+	ltc_4305,
+	ltc_4306,
+};
+
+struct chip_desc {
+	u8 nchans;
+	u8 num_gpios;
+};
+
+struct ltc4306 {
+	struct regmap *regmap;
+	struct gpio_chip gpiochip;
+	const struct chip_desc *chip;
+};
+
+static const struct chip_desc chips[] = {
+	[ltc_4305] = {
+		.nchans = LTC4305_MAX_NCHANS,
+	},
+	[ltc_4306] = {
+		.nchans = LTC4306_MAX_NCHANS,
+		.num_gpios = 2,
+	},
+};
+
+static bool ltc4306_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return (reg == LTC_REG_CONFIG) ? true : false;
+}
+
+static const struct regmap_config ltc4306_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC_REG_SWITCH,
+	.volatile_reg = ltc4306_is_volatile_reg,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int ltc4306_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(data->regmap, LTC_REG_CONFIG, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(1 - offset));
+}
+
+static void ltc4306_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->regmap, LTC_REG_CONFIG, BIT(5 - offset),
+			   value ? BIT(5 - offset) : 0);
+}
+
+static int ltc4306_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(data->regmap, LTC_REG_MODE, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(7 - offset));
+}
+
+static int ltc4306_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(7 - offset), BIT(7 - offset));
+}
+
+static int ltc4306_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int value)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	ltc4306_gpio_set(chip, offset, value);
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(7 - offset), 0);
+}
+
+static int ltc4306_gpio_set_config(struct gpio_chip *chip,
+				   unsigned int offset, unsigned long config)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		val = 0;
+		break;
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		val = BIT(4 - offset);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(4 - offset), val);
+}
+
+static int ltc4306_gpio_init(struct ltc4306 *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (!data->chip->num_gpios)
+		return 0;
+
+	data->gpiochip.label = dev_name(dev);
+	data->gpiochip.base = -1;
+	data->gpiochip.ngpio = data->chip->num_gpios;
+	data->gpiochip.parent = dev;
+	data->gpiochip.can_sleep = true;
+	data->gpiochip.get_direction = ltc4306_gpio_get_direction;
+	data->gpiochip.direction_input = ltc4306_gpio_direction_input;
+	data->gpiochip.direction_output = ltc4306_gpio_direction_output;
+	data->gpiochip.get = ltc4306_gpio_get;
+	data->gpiochip.set = ltc4306_gpio_set;
+	data->gpiochip.set_config = ltc4306_gpio_set_config;
+	data->gpiochip.owner = THIS_MODULE;
+
+	/* gpiolib assumes all GPIOs default input */
+	regmap_write(data->regmap, LTC_REG_MODE, LTC_GPIO_ALL_INPUT);
+
+	return devm_gpiochip_add_data(dev, &data->gpiochip, data);
+}
+
+static int ltc4306_select_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct ltc4306 *data = i2c_mux_priv(muxc);
+
+	return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
+				  LTC_SWITCH_MASK, BIT(7 - chan));
+}
+
+static int ltc4306_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct ltc4306 *data = i2c_mux_priv(muxc);
+
+	return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
+				  LTC_SWITCH_MASK, 0);
+}
+
+static const struct i2c_device_id ltc4306_id[] = {
+	{ "ltc4305", ltc_4305 },
+	{ "ltc4306", ltc_4306 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc4306_id);
+
+static const struct of_device_id ltc4306_of_match[] = {
+	{ .compatible = "lltc,ltc4305", .data = &chips[ltc_4305] },
+	{ .compatible = "lltc,ltc4306", .data = &chips[ltc_4306] },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ltc4306_of_match);
+
+static int ltc4306_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+	const struct chip_desc *chip;
+	struct i2c_mux_core *muxc;
+	struct ltc4306 *data;
+	struct gpio_desc *gpio;
+	bool idle_disc;
+	unsigned int val = 0;
+	int num, ret;
+
+	chip = of_device_get_match_data(&client->dev);
+
+	if (!chip)
+		chip = &chips[id->driver_data];
+
+	idle_disc = device_property_read_bool(&client->dev,
+					      "i2c-mux-idle-disconnect");
+
+	muxc = i2c_mux_alloc(adap, &client->dev,
+			     chip->nchans, sizeof(*data),
+			     I2C_MUX_LOCKED, ltc4306_select_mux,
+			     idle_disc ? ltc4306_deselect_mux : NULL);
+	if (!muxc)
+		return -ENOMEM;
+	data = i2c_mux_priv(muxc);
+	data->chip = chip;
+
+	i2c_set_clientdata(client, muxc);
+
+	data->regmap = devm_regmap_init_i2c(client, &ltc4306_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* Reset and enable the mux if an enable GPIO is specified. */
+	gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	if (gpio) {
+		udelay(1);
+		gpiod_set_value(gpio, 1);
+	}
+
+	/*
+	 * Write the mux register at addr to verify
+	 * that the mux is in fact present. This also
+	 * initializes the mux to disconnected state.
+	 */
+	if (regmap_write(data->regmap, LTC_REG_SWITCH, 0) < 0) {
+		dev_warn(&client->dev, "probe failed\n");
+		return -ENODEV;
+	}
+
+	if (device_property_read_bool(&client->dev,
+				      "ltc,downstream-accelerators-enable"))
+		val |= LTC_DOWNSTREAM_ACCL_EN;
+
+	if (device_property_read_bool(&client->dev,
+				      "ltc,upstream-accelerators-enable"))
+		val |= LTC_UPSTREAM_ACCL_EN;
+
+	if (regmap_write(data->regmap, LTC_REG_CONFIG, val) < 0)
+		return -ENODEV;
+
+	ret = ltc4306_gpio_init(data);
+	if (ret < 0)
+		return ret;
+
+	/* Now create an adapter for each channel */
+	for (num = 0; num < chip->nchans; num++) {
+		ret = i2c_mux_add_adapter(muxc, 0, num, 0);
+		if (ret) {
+			i2c_mux_del_adapters(muxc);
+			return ret;
+		}
+	}
+
+	dev_info(&client->dev,
+		 "registered %d multiplexed busses for I2C switch %s\n",
+		 num, client->name);
+
+	return 0;
+}
+
+static int ltc4306_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	i2c_mux_del_adapters(muxc);
+
+	return 0;
+}
+
+static struct i2c_driver ltc4306_driver = {
+	.driver		= {
+		.name	= "ltc4306",
+		.of_match_table = of_match_ptr(ltc4306_of_match),
+	},
+	.probe		= ltc4306_probe,
+	.remove		= ltc4306_remove,
+	.id_table	= ltc4306_id,
+};
+
+module_i2c_driver(ltc4306_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Linear Technology LTC4306, LTC4305 I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-mlxcpld.c
new file mode 100644
index 0000000..12ad8d6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -0,0 +1,221 @@
+/*
+ * drivers/i2c/muxes/i2c-mux-mlxcpld.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_data/x86/mlxcpld.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CPLD_MUX_MAX_NCHANS	8
+
+/* mlxcpld_mux - mux control structure:
+ * @last_chan - last register value
+ * @client - I2C device client
+ */
+struct mlxcpld_mux {
+	u8 last_chan;
+	struct i2c_client *client;
+};
+
+/* MUX logic description.
+ * Driver can support different mux control logic, according to CPLD
+ * implementation.
+ *
+ * Connectivity schema.
+ *
+ * i2c-mlxcpld                                 Digital               Analog
+ * driver
+ * *--------*                                 * -> mux1 (virt bus2) -> mux -> |
+ * | I2CLPC | i2c physical                    * -> mux2 (virt bus3) -> mux -> |
+ * | bridge | bus 1                 *---------*                               |
+ * | logic  |---------------------> * mux reg *                               |
+ * | in CPLD|                       *---------*                               |
+ * *--------*   i2c-mux-mlxpcld          ^    * -> muxn (virt busn) -> mux -> |
+ *     |        driver                   |                                    |
+ *     |        *---------------*        |                              Devices
+ *     |        * CPLD (i2c bus)* select |
+ *     |        * registers for *--------*
+ *     |        * mux selection * deselect
+ *     |        *---------------*
+ *     |                 |
+ * <-------->     <----------->
+ * i2c cntrl      Board cntrl reg
+ * reg space      space (mux select,
+ *                IO, LED, WD, info)
+ *
+ */
+
+static const struct i2c_device_id mlxcpld_mux_id[] = {
+	{ "mlxcpld_mux_module", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mlxcpld_mux_id);
+
+/* Write to mux register. Don't use i2c_transfer() and i2c_smbus_xfer()
+ * for this as they will try to lock adapter a second time.
+ */
+static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
+				 struct i2c_client *client, u8 val)
+{
+	struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
+	int ret = -ENODEV;
+
+	if (adap->algo->master_xfer) {
+		struct i2c_msg msg;
+		u8 msgbuf[] = {pdata->sel_reg_addr, val};
+
+		msg.addr = client->addr;
+		msg.flags = 0;
+		msg.len = 2;
+		msg.buf = msgbuf;
+		ret = __i2c_transfer(adap, &msg, 1);
+
+		if (ret >= 0 && ret != 1)
+			ret = -EREMOTEIO;
+	} else if (adap->algo->smbus_xfer) {
+		union i2c_smbus_data data;
+
+		data.byte = val;
+		ret = adap->algo->smbus_xfer(adap, client->addr,
+					     client->flags, I2C_SMBUS_WRITE,
+					     pdata->sel_reg_addr,
+					     I2C_SMBUS_BYTE_DATA, &data);
+	}
+
+	return ret;
+}
+
+static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	u8 regval = chan + 1;
+	int err = 0;
+
+	/* Only select the channel if its different from the last channel */
+	if (data->last_chan != regval) {
+		err = mlxcpld_mux_reg_write(muxc->parent, client, regval);
+		data->last_chan = err < 0 ? 0 : regval;
+	}
+
+	return err;
+}
+
+static int mlxcpld_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+
+	/* Deselect active channel */
+	data->last_chan = 0;
+
+	return mlxcpld_mux_reg_write(muxc->parent, client, data->last_chan);
+}
+
+/* Probe/reomove functions */
+static int mlxcpld_mux_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+	struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
+	struct i2c_mux_core *muxc;
+	int num, force;
+	struct mlxcpld_mux *data;
+	int err;
+
+	if (!pdata)
+		return -EINVAL;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -ENODEV;
+
+	muxc = i2c_mux_alloc(adap, &client->dev, CPLD_MUX_MAX_NCHANS,
+			     sizeof(*data), 0, mlxcpld_mux_select_chan,
+			     mlxcpld_mux_deselect);
+	if (!muxc)
+		return -ENOMEM;
+
+	data = i2c_mux_priv(muxc);
+	i2c_set_clientdata(client, muxc);
+	data->client = client;
+	data->last_chan = 0; /* force the first selection */
+
+	/* Create an adapter for each channel. */
+	for (num = 0; num < CPLD_MUX_MAX_NCHANS; num++) {
+		if (num >= pdata->num_adaps)
+			/* discard unconfigured channels */
+			break;
+
+		force = pdata->adap_ids[num];
+
+		err = i2c_mux_add_adapter(muxc, force, num, 0);
+		if (err)
+			goto virt_reg_failed;
+	}
+
+	return 0;
+
+virt_reg_failed:
+	i2c_mux_del_adapters(muxc);
+	return err;
+}
+
+static int mlxcpld_mux_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	i2c_mux_del_adapters(muxc);
+	return 0;
+}
+
+static struct i2c_driver mlxcpld_mux_driver = {
+	.driver		= {
+		.name	= "mlxcpld-mux",
+	},
+	.probe		= mlxcpld_mux_probe,
+	.remove		= mlxcpld_mux_remove,
+	.id_table	= mlxcpld_mux_id,
+};
+
+module_i2c_driver(mlxcpld_mux_driver);
+
+MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
+MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:i2c-mux-mlxcpld");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca9541.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca9541.c
new file mode 100644
index 0000000..6a39ada
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -0,0 +1,402 @@
+/*
+ * I2C multiplexer driver for PCA9541 bus master selector
+ *
+ * Copyright (c) 2010 Ericsson AB.
+ *
+ * Author: Guenter Roeck <linux@roeck-us.net>
+ *
+ * Derived from:
+ *  pca954x.c
+ *
+ *  Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/platform_data/pca954x.h>
+#include <linux/slab.h>
+
+/*
+ * The PCA9541 is a bus master selector. It supports two I2C masters connected
+ * to a single slave bus.
+ *
+ * Before each bus transaction, a master has to acquire bus ownership. After the
+ * transaction is complete, bus ownership has to be released. This fits well
+ * into the I2C multiplexer framework, which provides select and release
+ * functions for this purpose. For this reason, this driver is modeled as
+ * single-channel I2C bus multiplexer.
+ *
+ * This driver assumes that the two bus masters are controlled by two different
+ * hosts. If a single host controls both masters, platform code has to ensure
+ * that only one of the masters is instantiated at any given time.
+ */
+
+#define PCA9541_CONTROL		0x01
+#define PCA9541_ISTAT		0x02
+
+#define PCA9541_CTL_MYBUS	(1 << 0)
+#define PCA9541_CTL_NMYBUS	(1 << 1)
+#define PCA9541_CTL_BUSON	(1 << 2)
+#define PCA9541_CTL_NBUSON	(1 << 3)
+#define PCA9541_CTL_BUSINIT	(1 << 4)
+#define PCA9541_CTL_TESTON	(1 << 6)
+#define PCA9541_CTL_NTESTON	(1 << 7)
+
+#define PCA9541_ISTAT_INTIN	(1 << 0)
+#define PCA9541_ISTAT_BUSINIT	(1 << 1)
+#define PCA9541_ISTAT_BUSOK	(1 << 2)
+#define PCA9541_ISTAT_BUSLOST	(1 << 3)
+#define PCA9541_ISTAT_MYTEST	(1 << 6)
+#define PCA9541_ISTAT_NMYTEST	(1 << 7)
+
+#define BUSON		(PCA9541_CTL_BUSON | PCA9541_CTL_NBUSON)
+#define MYBUS		(PCA9541_CTL_MYBUS | PCA9541_CTL_NMYBUS)
+#define mybus(x)	(!((x) & MYBUS) || ((x) & MYBUS) == MYBUS)
+#define busoff(x)	(!((x) & BUSON) || ((x) & BUSON) == BUSON)
+
+/* arbitration timeouts, in jiffies */
+#define ARB_TIMEOUT	(HZ / 8)	/* 125 ms until forcing bus ownership */
+#define ARB2_TIMEOUT	(HZ / 4)	/* 250 ms until acquisition failure */
+
+/* arbitration retry delays, in us */
+#define SELECT_DELAY_SHORT	50
+#define SELECT_DELAY_LONG	1000
+
+struct pca9541 {
+	struct i2c_client *client;
+	unsigned long select_timeout;
+	unsigned long arb_timeout;
+};
+
+static const struct i2c_device_id pca9541_id[] = {
+	{"pca9541", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9541_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pca9541_of_match[] = {
+	{ .compatible = "nxp,pca9541" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pca9541_of_match);
+#endif
+
+/*
+ * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock the adapter a second time.
+ */
+static int pca9541_reg_write(struct i2c_client *client, u8 command, u8 val)
+{
+	struct i2c_adapter *adap = client->adapter;
+	int ret;
+
+	if (adap->algo->master_xfer) {
+		struct i2c_msg msg;
+		char buf[2];
+
+		msg.addr = client->addr;
+		msg.flags = 0;
+		msg.len = 2;
+		buf[0] = command;
+		buf[1] = val;
+		msg.buf = buf;
+		ret = __i2c_transfer(adap, &msg, 1);
+	} else {
+		union i2c_smbus_data data;
+
+		data.byte = val;
+		ret = adap->algo->smbus_xfer(adap, client->addr,
+					     client->flags,
+					     I2C_SMBUS_WRITE,
+					     command,
+					     I2C_SMBUS_BYTE_DATA, &data);
+	}
+
+	return ret;
+}
+
+/*
+ * Read from chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock adapter a second time.
+ */
+static int pca9541_reg_read(struct i2c_client *client, u8 command)
+{
+	struct i2c_adapter *adap = client->adapter;
+	int ret;
+	u8 val;
+
+	if (adap->algo->master_xfer) {
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &command
+			},
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &val
+			}
+		};
+		ret = __i2c_transfer(adap, msg, 2);
+		if (ret == 2)
+			ret = val;
+		else if (ret >= 0)
+			ret = -EIO;
+	} else {
+		union i2c_smbus_data data;
+
+		ret = adap->algo->smbus_xfer(adap, client->addr,
+					     client->flags,
+					     I2C_SMBUS_READ,
+					     command,
+					     I2C_SMBUS_BYTE_DATA, &data);
+		if (!ret)
+			ret = data.byte;
+	}
+	return ret;
+}
+
+/*
+ * Arbitration management functions
+ */
+
+/* Release bus. Also reset NTESTON and BUSINIT if it was set. */
+static void pca9541_release_bus(struct i2c_client *client)
+{
+	int reg;
+
+	reg = pca9541_reg_read(client, PCA9541_CONTROL);
+	if (reg >= 0 && !busoff(reg) && mybus(reg))
+		pca9541_reg_write(client, PCA9541_CONTROL,
+				  (reg & PCA9541_CTL_NBUSON) >> 1);
+}
+
+/*
+ * Arbitration is defined as a two-step process. A bus master can only activate
+ * the slave bus if it owns it; otherwise it has to request ownership first.
+ * This multi-step process ensures that access contention is resolved
+ * gracefully.
+ *
+ * Bus	Ownership	Other master	Action
+ * state		requested access
+ * ----------------------------------------------------
+ * off	-		yes		wait for arbitration timeout or
+ *					for other master to drop request
+ * off	no		no		take ownership
+ * off	yes		no		turn on bus
+ * on	yes		-		done
+ * on	no		-		wait for arbitration timeout or
+ *					for other master to release bus
+ *
+ * The main contention point occurs if the slave bus is off and both masters
+ * request ownership at the same time. In this case, one master will turn on
+ * the slave bus, believing that it owns it. The other master will request
+ * bus ownership. Result is that the bus is turned on, and master which did
+ * _not_ own the slave bus before ends up owning it.
+ */
+
+/* Control commands per PCA9541 datasheet */
+static const u8 pca9541_control[16] = {
+	4, 0, 1, 5, 4, 4, 5, 5, 0, 0, 1, 1, 0, 4, 5, 1
+};
+
+/*
+ * Channel arbitration
+ *
+ * Return values:
+ *  <0: error
+ *  0 : bus not acquired
+ *  1 : bus acquired
+ */
+static int pca9541_arbitrate(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	int reg;
+
+	reg = pca9541_reg_read(client, PCA9541_CONTROL);
+	if (reg < 0)
+		return reg;
+
+	if (busoff(reg)) {
+		int istat;
+		/*
+		 * Bus is off. Request ownership or turn it on unless
+		 * other master requested ownership.
+		 */
+		istat = pca9541_reg_read(client, PCA9541_ISTAT);
+		if (!(istat & PCA9541_ISTAT_NMYTEST)
+		    || time_is_before_eq_jiffies(data->arb_timeout)) {
+			/*
+			 * Other master did not request ownership,
+			 * or arbitration timeout expired. Take the bus.
+			 */
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  pca9541_control[reg & 0x0f]
+					  | PCA9541_CTL_NTESTON);
+			data->select_timeout = SELECT_DELAY_SHORT;
+		} else {
+			/*
+			 * Other master requested ownership.
+			 * Set extra long timeout to give it time to acquire it.
+			 */
+			data->select_timeout = SELECT_DELAY_LONG * 2;
+		}
+	} else if (mybus(reg)) {
+		/*
+		 * Bus is on, and we own it. We are done with acquisition.
+		 * Reset NTESTON and BUSINIT, then return success.
+		 */
+		if (reg & (PCA9541_CTL_NTESTON | PCA9541_CTL_BUSINIT))
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  reg & ~(PCA9541_CTL_NTESTON
+						  | PCA9541_CTL_BUSINIT));
+		return 1;
+	} else {
+		/*
+		 * Other master owns the bus.
+		 * If arbitration timeout has expired, force ownership.
+		 * Otherwise request it.
+		 */
+		data->select_timeout = SELECT_DELAY_LONG;
+		if (time_is_before_eq_jiffies(data->arb_timeout)) {
+			/* Time is up, take the bus and reset it. */
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  pca9541_control[reg & 0x0f]
+					  | PCA9541_CTL_BUSINIT
+					  | PCA9541_CTL_NTESTON);
+		} else {
+			/* Request bus ownership if needed */
+			if (!(reg & PCA9541_CTL_NTESTON))
+				pca9541_reg_write(client,
+						  PCA9541_CONTROL,
+						  reg | PCA9541_CTL_NTESTON);
+		}
+	}
+	return 0;
+}
+
+static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	int ret;
+	unsigned long timeout = jiffies + ARB2_TIMEOUT;
+		/* give up after this time */
+
+	data->arb_timeout = jiffies + ARB_TIMEOUT;
+		/* force bus ownership after this time */
+
+	do {
+		ret = pca9541_arbitrate(client);
+		if (ret)
+			return ret < 0 ? ret : 0;
+
+		if (data->select_timeout == SELECT_DELAY_SHORT)
+			udelay(data->select_timeout);
+		else
+			msleep(data->select_timeout / 1000);
+	} while (time_is_after_eq_jiffies(timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int pca9541_release_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+
+	pca9541_release_bus(client);
+	return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int pca9541_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct i2c_mux_core *muxc;
+	struct pca9541 *data;
+	int force;
+	int ret;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/*
+	 * I2C accesses are unprotected here.
+	 * We have to lock the adapter before releasing the bus.
+	 */
+	i2c_lock_adapter(adap);
+	pca9541_release_bus(client);
+	i2c_unlock_adapter(adap);
+
+	/* Create mux adapter */
+
+	force = 0;
+	if (pdata)
+		force = pdata->modes[0].adap_id;
+	muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data),
+			     I2C_MUX_ARBITRATOR,
+			     pca9541_select_chan, pca9541_release_chan);
+	if (!muxc)
+		return -ENOMEM;
+
+	data = i2c_mux_priv(muxc);
+	data->client = client;
+
+	i2c_set_clientdata(client, muxc);
+
+	ret = i2c_mux_add_adapter(muxc, force, 0, 0);
+	if (ret)
+		return ret;
+
+	dev_info(&client->dev, "registered master selector for I2C %s\n",
+		 client->name);
+
+	return 0;
+}
+
+static int pca9541_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	i2c_mux_del_adapters(muxc);
+	return 0;
+}
+
+static struct i2c_driver pca9541_driver = {
+	.driver = {
+		   .name = "pca9541",
+		   .of_match_table = of_match_ptr(pca9541_of_match),
+		   },
+	.probe = pca9541_probe,
+	.remove = pca9541_remove,
+	.id_table = pca9541_id,
+};
+
+module_i2c_driver(pca9541_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PCA9541 I2C master selector driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca954x.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca954x.c
new file mode 100644
index 0000000..7b992db
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -0,0 +1,479 @@
+/*
+ * I2C multiplexer
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This module supports the PCA954x series of I2C multiplexer/switch chips
+ * made by Philips Semiconductors.
+ * This includes the:
+ *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547
+ *	 and PCA9548.
+ *
+ * These chips are all controlled via the I2C bus itself, and all have a
+ * single 8-bit register. The upstream "parent" bus fans out to two,
+ * four, or eight downstream busses or channels; which of these
+ * are selected is determined by the chip type and register contents. A
+ * mux can select only one sub-bus at a time; a switch can select any
+ * combination simultaneously.
+ *
+ * Based on:
+ *	pca954x.c from Kumar Gala <galak@kernel.crashing.org>
+ * Copyright (C) 2006
+ *
+ * Based on:
+ *	pca954x.c from Ken Harrenstien
+ * Copyright (C) 2004 Google, Inc. (Ken Harrenstien)
+ *
+ * Based on:
+ *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
+ * and
+ *	pca9540.c from Jean Delvare <jdelvare@suse.de>.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_data/pca954x.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define PCA954X_MAX_NCHANS 8
+
+#define PCA954X_IRQ_OFFSET 4
+
+enum pca_type {
+	pca_9540,
+	pca_9542,
+	pca_9543,
+	pca_9544,
+	pca_9545,
+	pca_9546,
+	pca_9547,
+	pca_9548,
+};
+
+struct chip_desc {
+	u8 nchans;
+	u8 enable;	/* used for muxes only */
+	u8 has_irq;
+	enum muxtype {
+		pca954x_ismux = 0,
+		pca954x_isswi
+	} muxtype;
+};
+
+struct pca954x {
+	const struct chip_desc *chip;
+
+	u8 last_chan;		/* last register value */
+	u8 deselect;
+	struct i2c_client *client;
+
+	struct irq_domain *irq;
+	unsigned int irq_mask;
+	raw_spinlock_t lock;
+};
+
+/* Provide specs for the PCA954x types we know about */
+static const struct chip_desc chips[] = {
+	[pca_9540] = {
+		.nchans = 2,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9542] = {
+		.nchans = 2,
+		.enable = 0x4,
+		.has_irq = 1,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9543] = {
+		.nchans = 2,
+		.has_irq = 1,
+		.muxtype = pca954x_isswi,
+	},
+	[pca_9544] = {
+		.nchans = 4,
+		.enable = 0x4,
+		.has_irq = 1,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9545] = {
+		.nchans = 4,
+		.has_irq = 1,
+		.muxtype = pca954x_isswi,
+	},
+	[pca_9546] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+	},
+	[pca_9547] = {
+		.nchans = 8,
+		.enable = 0x8,
+		.muxtype = pca954x_ismux,
+	},
+	[pca_9548] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+	},
+};
+
+static const struct i2c_device_id pca954x_id[] = {
+	{ "pca9540", pca_9540 },
+	{ "pca9542", pca_9542 },
+	{ "pca9543", pca_9543 },
+	{ "pca9544", pca_9544 },
+	{ "pca9545", pca_9545 },
+	{ "pca9546", pca_9546 },
+	{ "pca9547", pca_9547 },
+	{ "pca9548", pca_9548 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca954x_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pca954x_of_match[] = {
+	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
+	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
+	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
+	{ .compatible = "nxp,pca9544", .data = &chips[pca_9544] },
+	{ .compatible = "nxp,pca9545", .data = &chips[pca_9545] },
+	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
+	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
+	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pca954x_of_match);
+#endif
+
+/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
+   for this as they will try to lock adapter a second time */
+static int pca954x_reg_write(struct i2c_adapter *adap,
+			     struct i2c_client *client, u8 val)
+{
+	int ret = -ENODEV;
+
+	if (adap->algo->master_xfer) {
+		struct i2c_msg msg;
+		char buf[1];
+
+		msg.addr = client->addr;
+		msg.flags = 0;
+		msg.len = 1;
+		buf[0] = val;
+		msg.buf = buf;
+		ret = __i2c_transfer(adap, &msg, 1);
+
+		if (ret >= 0 && ret != 1)
+			ret = -EREMOTEIO;
+	} else {
+		union i2c_smbus_data data;
+		ret = adap->algo->smbus_xfer(adap, client->addr,
+					     client->flags,
+					     I2C_SMBUS_WRITE,
+					     val, I2C_SMBUS_BYTE, &data);
+	}
+
+	return ret;
+}
+
+static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	const struct chip_desc *chip = data->chip;
+	u8 regval;
+	int ret = 0;
+
+	/* we make switches look like muxes, not sure how to be smarter */
+	if (chip->muxtype == pca954x_ismux)
+		regval = chan | chip->enable;
+	else
+		regval = 1 << chan;
+
+	/* Only select the channel if its different from the last channel */
+	if (data->last_chan != regval) {
+		ret = pca954x_reg_write(muxc->parent, client, regval);
+		data->last_chan = ret < 0 ? 0 : regval;
+	}
+
+	return ret;
+}
+
+static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+
+	if (!(data->deselect & (1 << chan)))
+		return 0;
+
+	/* Deselect active channel */
+	data->last_chan = 0;
+	return pca954x_reg_write(muxc->parent, client, data->last_chan);
+}
+
+static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
+{
+	struct pca954x *data = dev_id;
+	unsigned int child_irq;
+	int ret, i, handled = 0;
+
+	ret = i2c_smbus_read_byte(data->client);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < data->chip->nchans; i++) {
+		if (ret & BIT(PCA954X_IRQ_OFFSET + i)) {
+			child_irq = irq_linear_revmap(data->irq, i);
+			handle_nested_irq(child_irq);
+			handled++;
+		}
+	}
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void pca954x_irq_mask(struct irq_data *idata)
+{
+	struct pca954x *data = irq_data_get_irq_chip_data(idata);
+	unsigned int pos = idata->hwirq;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&data->lock, flags);
+
+	data->irq_mask &= ~BIT(pos);
+	if (!data->irq_mask)
+		disable_irq(data->client->irq);
+
+	raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static void pca954x_irq_unmask(struct irq_data *idata)
+{
+	struct pca954x *data = irq_data_get_irq_chip_data(idata);
+	unsigned int pos = idata->hwirq;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&data->lock, flags);
+
+	if (!data->irq_mask)
+		enable_irq(data->client->irq);
+	data->irq_mask |= BIT(pos);
+
+	raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
+{
+	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+	return 0;
+}
+
+static struct irq_chip pca954x_irq_chip = {
+	.name = "i2c-mux-pca954x",
+	.irq_mask = pca954x_irq_mask,
+	.irq_unmask = pca954x_irq_unmask,
+	.irq_set_type = pca954x_irq_set_type,
+};
+
+static int pca954x_irq_setup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	int c, err, irq;
+
+	if (!data->chip->has_irq || client->irq <= 0)
+		return 0;
+
+	raw_spin_lock_init(&data->lock);
+
+	data->irq = irq_domain_add_linear(client->dev.of_node,
+					  data->chip->nchans,
+					  &irq_domain_simple_ops, data);
+	if (!data->irq)
+		return -ENODEV;
+
+	for (c = 0; c < data->chip->nchans; c++) {
+		irq = irq_create_mapping(data->irq, c);
+		irq_set_chip_data(irq, data);
+		irq_set_chip_and_handler(irq, &pca954x_irq_chip,
+			handle_simple_irq);
+	}
+
+	err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL,
+					pca954x_irq_handler,
+					IRQF_ONESHOT | IRQF_SHARED,
+					"pca954x", data);
+	if (err)
+		goto err_req_irq;
+
+	disable_irq(data->client->irq);
+
+	return 0;
+err_req_irq:
+	for (c = 0; c < data->chip->nchans; c++) {
+		irq = irq_find_mapping(data->irq, c);
+		irq_dispose_mapping(irq);
+	}
+	irq_domain_remove(data->irq);
+
+	return err;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int pca954x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct device_node *of_node = client->dev.of_node;
+	bool idle_disconnect_dt;
+	struct gpio_desc *gpio;
+	int num, force, class;
+	struct i2c_mux_core *muxc;
+	struct pca954x *data;
+	const struct of_device_id *match;
+	int ret;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
+
+	muxc = i2c_mux_alloc(adap, &client->dev,
+			     PCA954X_MAX_NCHANS, sizeof(*data), 0,
+			     pca954x_select_chan, pca954x_deselect_mux);
+	if (!muxc)
+		return -ENOMEM;
+	data = i2c_mux_priv(muxc);
+
+	i2c_set_clientdata(client, muxc);
+	data->client = client;
+
+	/* Get the mux out of reset if a reset GPIO is specified. */
+	gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	/* Write the mux register at addr to verify
+	 * that the mux is in fact present. This also
+	 * initializes the mux to disconnected state.
+	 */
+	if (i2c_smbus_write_byte(client, 0) < 0) {
+		dev_warn(&client->dev, "probe failed\n");
+		return -ENODEV;
+	}
+
+	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
+	if (match)
+		data->chip = of_device_get_match_data(&client->dev);
+	else
+		data->chip = &chips[id->driver_data];
+
+	data->last_chan = 0;		   /* force the first selection */
+
+	idle_disconnect_dt = of_node &&
+		of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+
+	ret = pca954x_irq_setup(muxc);
+	if (ret)
+		goto fail_del_adapters;
+
+	/* Now create an adapter for each channel */
+	for (num = 0; num < data->chip->nchans; num++) {
+		bool idle_disconnect_pd = false;
+
+		force = 0;			  /* dynamic adap number */
+		class = 0;			  /* no class by default */
+		if (pdata) {
+			if (num < pdata->num_modes) {
+				/* force static number */
+				force = pdata->modes[num].adap_id;
+				class = pdata->modes[num].class;
+			} else
+				/* discard unconfigured channels */
+				break;
+			idle_disconnect_pd = pdata->modes[num].deselect_on_exit;
+		}
+		data->deselect |= (idle_disconnect_pd ||
+				   idle_disconnect_dt) << num;
+
+		ret = i2c_mux_add_adapter(muxc, force, num, class);
+		if (ret)
+			goto fail_del_adapters;
+	}
+
+	dev_info(&client->dev,
+		 "registered %d multiplexed busses for I2C %s %s\n",
+		 num, data->chip->muxtype == pca954x_ismux
+				? "mux" : "switch", client->name);
+
+	return 0;
+
+fail_del_adapters:
+	i2c_mux_del_adapters(muxc);
+	return ret;
+}
+
+static int pca954x_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int c, irq;
+
+	if (data->irq) {
+		for (c = 0; c < data->chip->nchans; c++) {
+			irq = irq_find_mapping(data->irq, c);
+			irq_dispose_mapping(irq);
+		}
+		irq_domain_remove(data->irq);
+	}
+
+	i2c_mux_del_adapters(muxc);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pca954x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca954x *data = i2c_mux_priv(muxc);
+
+	data->last_chan = 0;
+	return i2c_smbus_write_byte(client, 0);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume);
+
+static struct i2c_driver pca954x_driver = {
+	.driver		= {
+		.name	= "pca954x",
+		.pm	= &pca954x_pm,
+		.of_match_table = of_match_ptr(pca954x_of_match),
+	},
+	.probe		= pca954x_probe,
+	.remove		= pca954x_remove,
+	.id_table	= pca954x_id,
+};
+
+module_i2c_driver(pca954x_driver);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pinctrl.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pinctrl.c
new file mode 100644
index 0000000..cc6818a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -0,0 +1,210 @@
+/*
+ * I2C multiplexer using pinctrl API
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include "../../pinctrl/core.h"
+
+struct i2c_mux_pinctrl {
+	struct pinctrl *pinctrl;
+	struct pinctrl_state **states;
+};
+
+static int i2c_mux_pinctrl_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct i2c_mux_pinctrl *mux = i2c_mux_priv(muxc);
+
+	return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
+}
+
+static int i2c_mux_pinctrl_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	return i2c_mux_pinctrl_select(muxc, muxc->num_adapters);
+}
+
+static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
+	struct pinctrl_state *state)
+{
+	struct i2c_adapter *root = NULL;
+	struct pinctrl_setting *setting;
+	struct i2c_adapter *pin_root;
+
+	list_for_each_entry(setting, &state->settings, node) {
+		pin_root = i2c_root_adapter(setting->pctldev->dev);
+		if (!pin_root)
+			return NULL;
+		if (!root)
+			root = pin_root;
+		else if (root != pin_root)
+			return NULL;
+	}
+
+	return root;
+}
+
+static struct i2c_adapter *i2c_mux_pinctrl_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_find_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
+static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct i2c_mux_core *muxc;
+	struct i2c_mux_pinctrl *mux;
+	struct i2c_adapter *parent;
+	struct i2c_adapter *root;
+	int num_names, i, ret;
+	const char *name;
+
+	num_names = of_property_count_strings(np, "pinctrl-names");
+	if (num_names < 0) {
+		dev_err(dev, "Cannot parse pinctrl-names: %d\n",
+			num_names);
+		return num_names;
+	}
+
+	parent = i2c_mux_pinctrl_parent_adapter(dev);
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	muxc = i2c_mux_alloc(parent, dev, num_names,
+			     sizeof(*mux) + num_names * sizeof(*mux->states),
+			     0, i2c_mux_pinctrl_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_put_parent;
+	}
+	mux = i2c_mux_priv(muxc);
+	mux->states = (struct pinctrl_state **)(mux + 1);
+
+	platform_set_drvdata(pdev, muxc);
+
+	mux->pinctrl = devm_pinctrl_get(dev);
+	if (IS_ERR(mux->pinctrl)) {
+		ret = PTR_ERR(mux->pinctrl);
+		dev_err(dev, "Cannot get pinctrl: %d\n", ret);
+		goto err_put_parent;
+	}
+
+	for (i = 0; i < num_names; i++) {
+		ret = of_property_read_string_index(np, "pinctrl-names", i,
+						    &name);
+		if (ret < 0) {
+			dev_err(dev, "Cannot parse pinctrl-names: %d\n", ret);
+			goto err_put_parent;
+		}
+
+		mux->states[i] = pinctrl_lookup_state(mux->pinctrl, name);
+		if (IS_ERR(mux->states[i])) {
+			ret = PTR_ERR(mux->states[i]);
+			dev_err(dev, "Cannot look up pinctrl state %s: %d\n",
+				name, ret);
+			goto err_put_parent;
+		}
+
+		if (strcmp(name, "idle"))
+			continue;
+
+		if (i != num_names - 1) {
+			dev_err(dev, "idle state must be last\n");
+			ret = -EINVAL;
+			goto err_put_parent;
+		}
+		muxc->deselect = i2c_mux_pinctrl_deselect;
+	}
+
+	root = i2c_root_adapter(&muxc->parent->dev);
+
+	muxc->mux_locked = true;
+	for (i = 0; i < num_names; i++) {
+		if (root != i2c_mux_pinctrl_root_adapter(mux->states[i])) {
+			muxc->mux_locked = false;
+			break;
+		}
+	}
+	if (muxc->mux_locked)
+		dev_info(dev, "mux-locked i2c mux\n");
+
+	/* Do not add any adapter for the idle state (if it's there at all). */
+	for (i = 0; i < num_names - !!muxc->deselect; i++) {
+		ret = i2c_mux_add_adapter(muxc, 0, i, 0);
+		if (ret)
+			goto err_del_adapter;
+	}
+
+	return 0;
+
+err_del_adapter:
+	i2c_mux_del_adapters(muxc);
+err_put_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_pinctrl_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_pinctrl_of_match[] = {
+	{ .compatible = "i2c-mux-pinctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
+
+static struct platform_driver i2c_mux_pinctrl_driver = {
+	.driver	= {
+		.name	= "i2c-mux-pinctrl",
+		.of_match_table = of_match_ptr(i2c_mux_pinctrl_of_match),
+	},
+	.probe	= i2c_mux_pinctrl_probe,
+	.remove	= i2c_mux_pinctrl_remove,
+};
+module_platform_driver(i2c_mux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
+MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-mux-pinctrl");
diff --git a/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-reg.c b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-reg.c
new file mode 100644
index 0000000..d970318
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/i2c/muxes/i2c-mux-reg.c
@@ -0,0 +1,277 @@
+/*
+ * I2C multiplexer using a single register
+ *
+ * Copyright 2015 Freescale Semiconductor
+ * York Sun  <yorksun@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_data/i2c-mux-reg.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct regmux {
+	struct i2c_mux_reg_platform_data data;
+};
+
+static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id)
+{
+	if (!mux->data.reg)
+		return -EINVAL;
+
+	/*
+	 * Write to the register, followed by a read to ensure the write is
+	 * completed on a "posted" bus, for example PCI or write buffers.
+	 * The endianness of reading doesn't matter and the return data
+	 * is not used.
+	 */
+	switch (mux->data.reg_size) {
+	case 4:
+		if (mux->data.little_endian)
+			iowrite32(chan_id, mux->data.reg);
+		else
+			iowrite32be(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread32(mux->data.reg);
+		break;
+	case 2:
+		if (mux->data.little_endian)
+			iowrite16(chan_id, mux->data.reg);
+		else
+			iowrite16be(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread16(mux->data.reg);
+		break;
+	case 1:
+		iowrite8(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread8(mux->data.reg);
+		break;
+	}
+
+	return 0;
+}
+
+static int i2c_mux_reg_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct regmux *mux = i2c_mux_priv(muxc);
+
+	return i2c_mux_reg_set(mux, chan);
+}
+
+static int i2c_mux_reg_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct regmux *mux = i2c_mux_priv(muxc);
+
+	if (mux->data.idle_in_use)
+		return i2c_mux_reg_set(mux, mux->data.idle);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static int i2c_mux_reg_probe_dt(struct regmux *mux,
+				struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *adapter_np, *child;
+	struct i2c_adapter *adapter;
+	struct resource res;
+	unsigned *values;
+	int i = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!adapter_np) {
+		dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
+		return -ENODEV;
+	}
+	adapter = of_find_i2c_adapter_by_node(adapter_np);
+	of_node_put(adapter_np);
+	if (!adapter)
+		return -EPROBE_DEFER;
+
+	mux->data.parent = i2c_adapter_id(adapter);
+	put_device(&adapter->dev);
+
+	mux->data.n_values = of_get_child_count(np);
+	if (of_find_property(np, "little-endian", NULL)) {
+		mux->data.little_endian = true;
+	} else if (of_find_property(np, "big-endian", NULL)) {
+		mux->data.little_endian = false;
+	} else {
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \
+	defined(__LITTLE_ENDIAN)
+		mux->data.little_endian = true;
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : \
+	defined(__BIG_ENDIAN)
+		mux->data.little_endian = false;
+#else
+#error Endianness not defined?
+#endif
+	}
+	if (of_find_property(np, "write-only", NULL))
+		mux->data.write_only = true;
+	else
+		mux->data.write_only = false;
+
+	values = devm_kzalloc(&pdev->dev,
+			      sizeof(*mux->data.values) * mux->data.n_values,
+			      GFP_KERNEL);
+	if (!values) {
+		dev_err(&pdev->dev, "Cannot allocate values array");
+		return -ENOMEM;
+	}
+
+	for_each_child_of_node(np, child) {
+		of_property_read_u32(child, "reg", values + i);
+		i++;
+	}
+	mux->data.values = values;
+
+	if (!of_property_read_u32(np, "idle-state", &mux->data.idle))
+		mux->data.idle_in_use = true;
+
+	/* map address from "reg" if exists */
+	if (of_address_to_resource(np, 0, &res) == 0) {
+		mux->data.reg_size = resource_size(&res);
+		mux->data.reg = devm_ioremap_resource(&pdev->dev, &res);
+		if (IS_ERR(mux->data.reg))
+			return PTR_ERR(mux->data.reg);
+	}
+
+	return 0;
+}
+#else
+static int i2c_mux_reg_probe_dt(struct regmux *mux,
+				struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static int i2c_mux_reg_probe(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc;
+	struct regmux *mux;
+	struct i2c_adapter *parent;
+	struct resource *res;
+	unsigned int class;
+	int i, ret, nr;
+
+	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+			sizeof(mux->data));
+	} else {
+		ret = i2c_mux_reg_probe_dt(mux, pdev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error parsing device tree");
+			return ret;
+		}
+	}
+
+	parent = i2c_get_adapter(mux->data.parent);
+	if (!parent)
+		return -EPROBE_DEFER;
+
+	if (!mux->data.reg) {
+		dev_info(&pdev->dev,
+			"Register not set, using platform resource\n");
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		mux->data.reg_size = resource_size(res);
+		mux->data.reg = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(mux->data.reg)) {
+			ret = PTR_ERR(mux->data.reg);
+			goto err_put_parent;
+		}
+	}
+
+	if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
+	    mux->data.reg_size != 1) {
+		dev_err(&pdev->dev, "Invalid register size\n");
+		ret = -EINVAL;
+		goto err_put_parent;
+	}
+
+	muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
+			     i2c_mux_reg_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_put_parent;
+	}
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	if (mux->data.idle_in_use)
+		muxc->deselect = i2c_mux_reg_deselect;
+
+	for (i = 0; i < mux->data.n_values; i++) {
+		nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
+		class = mux->data.classes ? mux->data.classes[i] : 0;
+
+		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+		if (ret)
+			goto err_del_mux_adapters;
+	}
+
+	dev_dbg(&pdev->dev, "%d port mux on %s adapter\n",
+		 mux->data.n_values, muxc->parent->name);
+
+	return 0;
+
+err_del_mux_adapters:
+	i2c_mux_del_adapters(muxc);
+err_put_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_reg_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_reg_of_match[] = {
+	{ .compatible = "i2c-mux-reg", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_reg_of_match);
+
+static struct platform_driver i2c_mux_reg_driver = {
+	.probe	= i2c_mux_reg_probe,
+	.remove	= i2c_mux_reg_remove,
+	.driver	= {
+		.name	= "i2c-mux-reg",
+		.of_match_table = of_match_ptr(i2c_mux_reg_of_match),
+	},
+};
+
+module_platform_driver(i2c_mux_reg_driver);
+
+MODULE_DESCRIPTION("Register-based I2C multiplexer driver");
+MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-mux-reg");