[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/iio/accel/Kconfig b/src/kernel/linux/v4.14/drivers/iio/accel/Kconfig
new file mode 100644
index 0000000..15de262
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/iio/accel/Kconfig
@@ -0,0 +1,376 @@
+#
+# Accelerometer drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Accelerometers"
+
+config ADXL345
+ tristate
+
+config ADXL345_I2C
+ tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
+ depends on INPUT_ADXL34X=n
+ depends on I2C
+ select ADXL345
+ select REGMAP_I2C
+ help
+ Say Y here if you want to build support for the Analog Devices
+ ADXL345 3-axis digital accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called adxl345_i2c and you will also get adxl345_core
+ for the core module.
+
+config ADXL345_SPI
+ tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
+ depends on INPUT_ADXL34X=n
+ depends on SPI
+ select ADXL345
+ select REGMAP_SPI
+ help
+ Say Y here if you want to build support for the Analog Devices
+ ADXL345 3-axis digital accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called adxl345_spi and you will also get adxl345_core
+ for the core module.
+
+config BMA180
+ tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here if you want to build a driver for the Bosch BMA180 or
+ BMA250 triaxial acceleration sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma180.
+
+config BMA220
+ tristate "Bosch BMA220 3-Axis Accelerometer Driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to add support for the Bosch BMA220 triaxial
+ acceleration sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma220_spi.
+
+config BMC150_ACCEL
+ tristate "Bosch BMC150 Accelerometer Driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select REGMAP
+ select BMC150_ACCEL_I2C if I2C
+ select BMC150_ACCEL_SPI if SPI
+ help
+ Say yes here to build support for the following Bosch accelerometers:
+ BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
+
+ This is a combo module with both accelerometer and magnetometer.
+ This driver is only implementing accelerometer part, which has
+ its own address and register map.
+
+config BMC150_ACCEL_I2C
+ tristate
+ select REGMAP_I2C
+
+config BMC150_ACCEL_SPI
+ tristate
+ select REGMAP_SPI
+
+config DA280
+ tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
+ depends on I2C
+ help
+ Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
+ digital accelerometer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da280.
+
+config DA311
+ tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
+ depends on I2C
+ help
+ Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
+ digital accelerometer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da311.
+
+config DMARD06
+ tristate "Domintech DMARD06 Digital Accelerometer Driver"
+ depends on OF || COMPILE_TEST
+ depends on I2C
+ help
+ Say yes here to build support for the Domintech low-g tri-axial
+ digital accelerometers: DMARD05, DMARD06, DMARD07.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dmard06.
+
+config DMARD09
+ tristate "Domintech DMARD09 3-axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Domintech DMARD09 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called dmard09.
+
+config DMARD10
+ tristate "Domintech DMARD10 3-axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Domintech DMARD10 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called dmard10.
+
+config HID_SENSOR_ACCEL_3D
+ depends on HID_SENSOR_HUB
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
+ tristate "HID Accelerometers 3D"
+ help
+ Say yes here to build support for the HID SENSOR
+ accelerometers 3D.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hid-sensor-accel-3d.
+
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ depends on !SENSORS_LIS3_I2C
+ depends on !SENSORS_LIS3_SPI
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+ select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
+ LNG2DM
+
+ This driver can also be built as a module. If so, these modules
+ will be created:
+ - st_accel (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_SPI
+
+config KXSD9
+ tristate "Kionix KXSD9 Accelerometer Driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the Kionix KXSD9 accelerometer.
+ It can be accessed using an (optional) SPI or I2C interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called kxsd9.
+
+config KXSD9_SPI
+ tristate "Kionix KXSD9 SPI transport"
+ depends on KXSD9
+ depends on SPI
+ default KXSD9
+ select REGMAP_SPI
+ help
+ Say yes here to enable the Kionix KXSD9 accelerometer
+ SPI transport channel.
+
+config KXSD9_I2C
+ tristate "Kionix KXSD9 I2C transport"
+ depends on KXSD9
+ depends on I2C
+ default KXSD9
+ select REGMAP_I2C
+ help
+ Say yes here to enable the Kionix KXSD9 accelerometer
+ I2C transport channel.
+
+config KXCJK1013
+ tristate "Kionix 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here if you want to build a driver for the Kionix KXCJK-1013
+ triaxial acceleration sensor. This driver also supports KXCJ9-1008
+ and KXTJ2-1009.
+
+ To compile this driver as a module, choose M here: the module will
+ be called kxcjk-1013.
+
+config MC3230
+ tristate "mCube MC3230 Digital Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to build support for the mCube MC3230 low-g tri-axial
+ digital accelerometer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mc3230.
+
+config MMA7455
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config MMA7455_I2C
+ tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
+ depends on I2C
+ select MMA7455
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the Freescale MMA7455L and
+ MMA7456L 3-axis accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma7455_i2c.
+
+config MMA7455_SPI
+ tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
+ depends on SPI_MASTER
+ select MMA7455
+ select REGMAP_SPI
+ help
+ Say yes here to build support for the Freescale MMA7455L and
+ MMA7456L 3-axis accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma7455_spi.
+
+config MMA7660
+ tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Freescale MMA7660FC 3-Axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called mma7660.
+
+config MMA8452
+ tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the following Freescale / NXP 3-axis
+ accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
+ FXLS8471Q.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma8452.
+
+config MMA9551_CORE
+ tristate
+
+config MMA9551
+ tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
+ depends on I2C
+ select MMA9551_CORE
+
+ help
+ Say yes here to build support for the Freescale MMA9551L
+ Intelligent Motion-Sensing Platform Driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma9551.
+
+config MMA9553
+ tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
+ depends on I2C
+ select MMA9551_CORE
+ help
+ Say yes here to build support for the Freescale MMA9553L
+ Intelligent Pedometer Platform Driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma9553.
+
+config MXC4005
+ tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the Memsic MXC4005XC 3-axis
+ accelerometer.
+
+ To compile this driver as a module, choose M. The module will be
+ called mxc4005.
+
+config MXC6255
+ tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the Memsic MXC6255 Orientation
+ Sensing Accelerometer Driver.
+
+ To compile this driver as a module, choose M here: the module will be
+ called mxc6255.
+
+config SCA3000
+ select IIO_BUFFER
+ select IIO_KFIFO_BUF
+ depends on SPI
+ tristate "VTI SCA3000 series accelerometers"
+ help
+ Say Y here to build support for the VTI SCA3000 series of SPI
+ accelerometers. These devices use a hardware ring buffer.
+
+ To compile this driver as a module, say M here: the module will be
+ called sca3000.
+
+config STK8312
+ tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to get support for the Sensortek STK8312 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk8312.
+
+config STK8BA50
+ tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to get support for the Sensortek STK8BA50 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk8ba50.
+
+endmenu