[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/iio/pressure/bmp280-spi.c b/src/kernel/linux/v4.14/drivers/iio/pressure/bmp280-spi.c
new file mode 100644
index 0000000..17bc955
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/iio/pressure/bmp280-spi.c
@@ -0,0 +1,125 @@
+/*
+ * SPI interface for the BMP280 driver
+ *
+ * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
+ */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+
+#include "bmp280.h"
+
+static int bmp280_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[2];
+
+ memcpy(buf, data, 2);
+ /*
+ * The SPI register address (= full register address without bit 7) and
+ * the write command (bit7 = RW = '0')
+ */
+ buf[0] &= ~0x80;
+
+ return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int bmp280_regmap_spi_read(void *context, const void *reg,
+ size_t reg_size, void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static struct regmap_bus bmp280_regmap_bus = {
+ .write = bmp280_regmap_spi_write,
+ .read = bmp280_regmap_spi_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static int bmp280_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct regmap *regmap;
+ const struct regmap_config *regmap_config;
+ int ret;
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi_setup failed!\n");
+ return ret;
+ }
+
+ switch (id->driver_data) {
+ case BMP180_CHIP_ID:
+ regmap_config = &bmp180_regmap_config;
+ break;
+ case BMP280_CHIP_ID:
+ case BME280_CHIP_ID:
+ regmap_config = &bmp280_regmap_config;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap = devm_regmap_init(&spi->dev,
+ &bmp280_regmap_bus,
+ &spi->dev,
+ regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "failed to allocate register map\n");
+ return PTR_ERR(regmap);
+ }
+
+ return bmp280_common_probe(&spi->dev,
+ regmap,
+ id->driver_data,
+ id->name,
+ spi->irq);
+}
+
+static int bmp280_spi_remove(struct spi_device *spi)
+{
+ return bmp280_common_remove(&spi->dev);
+}
+
+static const struct of_device_id bmp280_of_spi_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { .compatible = "bosch,bmp180", },
+ { .compatible = "bosch,bmp181", },
+ { .compatible = "bosch,bmp280", },
+ { .compatible = "bosch,bme280", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
+
+static const struct spi_device_id bmp280_spi_id[] = {
+ { "bmp180", BMP180_CHIP_ID },
+ { "bmp181", BMP180_CHIP_ID },
+ { "bmp280", BMP280_CHIP_ID },
+ { "bme280", BME280_CHIP_ID },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
+
+static struct spi_driver bmp280_spi_driver = {
+ .driver = {
+ .name = "bmp280",
+ .of_match_table = bmp280_of_spi_match,
+ .pm = &bmp280_dev_pm_ops,
+ },
+ .id_table = bmp280_spi_id,
+ .probe = bmp280_spi_probe,
+ .remove = bmp280_spi_remove,
+};
+module_spi_driver(bmp280_spi_driver);
+
+MODULE_DESCRIPTION("BMP280 SPI bus driver");
+MODULE_LICENSE("GPL");