[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/input/keyboard/atkbd.c b/src/kernel/linux/v4.14/drivers/input/keyboard/atkbd.c
new file mode 100644
index 0000000..7e75835
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/input/keyboard/atkbd.c
@@ -0,0 +1,1821 @@
+/*
+ * AT and PS/2 keyboard driver
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This driver can handle standard AT keyboards and PS/2 keyboards in
+ * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb
+ * input-only controllers and AT keyboards connected over a one way RS232
+ * converter.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+#include <linux/libps2.h>
+#include <linux/mutex.h>
+#include <linux/dmi.h>
+
+#define DRIVER_DESC "AT and PS/2 keyboard driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int atkbd_set = 2;
+module_param_named(set, atkbd_set, int, 0);
+MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
+
+#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
+static bool atkbd_reset;
+#else
+static bool atkbd_reset = true;
+#endif
+module_param_named(reset, atkbd_reset, bool, 0);
+MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
+
+static bool atkbd_softrepeat;
+module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
+MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
+
+static bool atkbd_softraw = true;
+module_param_named(softraw, atkbd_softraw, bool, 0);
+MODULE_PARM_DESC(softraw, "Use software generated rawmode");
+
+static bool atkbd_scroll;
+module_param_named(scroll, atkbd_scroll, bool, 0);
+MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
+
+static bool atkbd_extra;
+module_param_named(extra, atkbd_extra, bool, 0);
+MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
+/*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via a userland utility.
+ */
+
+#define ATKBD_KEYMAP_SIZE 512
+
+static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = {
+
+#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+
+/* XXX: need a more general approach */
+
+#include "hpps2atkbd.h" /* include the keyboard scancodes */
+
+#else
+ 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117,
+ 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0,
+ 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183,
+ 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185,
+ 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
+ 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85,
+ 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0,
+ 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
+ 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
+ 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
+ 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
+ 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
+ 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
+
+ 0, 0, 0, 65, 99,
+#endif
+};
+
+static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = {
+
+ 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60,
+ 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62,
+ 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64,
+ 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66,
+ 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
+ 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70,
+ 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104,
+ 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183,
+
+ 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0,
+ 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
+ 148,149,147,140
+};
+
+static const unsigned short atkbd_unxlate_table[128] = {
+ 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
+ 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
+ 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
+ 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3,
+ 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105,
+ 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63,
+ 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
+ 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
+};
+
+#define ATKBD_CMD_SETLEDS 0x10ed
+#define ATKBD_CMD_GSCANSET 0x11f0
+#define ATKBD_CMD_SSCANSET 0x10f0
+#define ATKBD_CMD_GETID 0x02f2
+#define ATKBD_CMD_SETREP 0x10f3
+#define ATKBD_CMD_ENABLE 0x00f4
+#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */
+#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */
+#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */
+#define ATKBD_CMD_RESET_BAT 0x02ff
+#define ATKBD_CMD_RESEND 0x00fe
+#define ATKBD_CMD_EX_ENABLE 0x10ea
+#define ATKBD_CMD_EX_SETLEDS 0x20eb
+#define ATKBD_CMD_OK_GETID 0x02e8
+
+#define ATKBD_RET_ACK 0xfa
+#define ATKBD_RET_NAK 0xfe
+#define ATKBD_RET_BAT 0xaa
+#define ATKBD_RET_EMUL0 0xe0
+#define ATKBD_RET_EMUL1 0xe1
+#define ATKBD_RET_RELEASE 0xf0
+#define ATKBD_RET_HANJA 0xf1
+#define ATKBD_RET_HANGEUL 0xf2
+#define ATKBD_RET_ERR 0xff
+
+#define ATKBD_KEY_UNKNOWN 0
+#define ATKBD_KEY_NULL 255
+
+#define ATKBD_SCR_1 0xfffe
+#define ATKBD_SCR_2 0xfffd
+#define ATKBD_SCR_4 0xfffc
+#define ATKBD_SCR_8 0xfffb
+#define ATKBD_SCR_CLICK 0xfffa
+#define ATKBD_SCR_LEFT 0xfff9
+#define ATKBD_SCR_RIGHT 0xfff8
+
+#define ATKBD_SPECIAL ATKBD_SCR_RIGHT
+
+#define ATKBD_LED_EVENT_BIT 0
+#define ATKBD_REP_EVENT_BIT 1
+
+#define ATKBD_XL_ERR 0x01
+#define ATKBD_XL_BAT 0x02
+#define ATKBD_XL_ACK 0x04
+#define ATKBD_XL_NAK 0x08
+#define ATKBD_XL_HANGEUL 0x10
+#define ATKBD_XL_HANJA 0x20
+
+static const struct {
+ unsigned short keycode;
+ unsigned char set2;
+} atkbd_scroll_keys[] = {
+ { ATKBD_SCR_1, 0xc5 },
+ { ATKBD_SCR_2, 0x9d },
+ { ATKBD_SCR_4, 0xa4 },
+ { ATKBD_SCR_8, 0x9b },
+ { ATKBD_SCR_CLICK, 0xe0 },
+ { ATKBD_SCR_LEFT, 0xcb },
+ { ATKBD_SCR_RIGHT, 0xd2 },
+};
+
+/*
+ * The atkbd control structure
+ */
+
+struct atkbd {
+
+ struct ps2dev ps2dev;
+ struct input_dev *dev;
+
+ /* Written only during init */
+ char name[64];
+ char phys[32];
+
+ unsigned short id;
+ unsigned short keycode[ATKBD_KEYMAP_SIZE];
+ DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
+ unsigned char set;
+ bool translated;
+ bool extra;
+ bool write;
+ bool softrepeat;
+ bool softraw;
+ bool scroll;
+ bool enabled;
+
+ /* Accessed only from interrupt */
+ unsigned char emul;
+ bool resend;
+ bool release;
+ unsigned long xl_bit;
+ unsigned int last;
+ unsigned long time;
+ unsigned long err_count;
+
+ struct delayed_work event_work;
+ unsigned long event_jiffies;
+ unsigned long event_mask;
+
+ /* Serializes reconnect(), attr->set() and event work */
+ struct mutex mutex;
+};
+
+/*
+ * System-specific keymap fixup routine
+ */
+static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
+static void *atkbd_platform_fixup_data;
+static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
+
+/*
+ * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding
+ * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed.
+ */
+static bool atkbd_skip_deactivate;
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+ ssize_t (*handler)(struct atkbd *, char *));
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+ ssize_t (*handler)(struct atkbd *, const char *, size_t));
+#define ATKBD_DEFINE_ATTR(_name) \
+static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
+static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \
+static ssize_t atkbd_do_show_##_name(struct device *d, \
+ struct device_attribute *attr, char *b) \
+{ \
+ return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
+} \
+static ssize_t atkbd_do_set_##_name(struct device *d, \
+ struct device_attribute *attr, const char *b, size_t s) \
+{ \
+ return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
+} \
+static struct device_attribute atkbd_attr_##_name = \
+ __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
+
+ATKBD_DEFINE_ATTR(extra);
+ATKBD_DEFINE_ATTR(force_release);
+ATKBD_DEFINE_ATTR(scroll);
+ATKBD_DEFINE_ATTR(set);
+ATKBD_DEFINE_ATTR(softrepeat);
+ATKBD_DEFINE_ATTR(softraw);
+
+#define ATKBD_DEFINE_RO_ATTR(_name) \
+static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
+static ssize_t atkbd_do_show_##_name(struct device *d, \
+ struct device_attribute *attr, char *b) \
+{ \
+ return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
+} \
+static struct device_attribute atkbd_attr_##_name = \
+ __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
+
+ATKBD_DEFINE_RO_ATTR(err_count);
+
+static struct attribute *atkbd_attributes[] = {
+ &atkbd_attr_extra.attr,
+ &atkbd_attr_force_release.attr,
+ &atkbd_attr_scroll.attr,
+ &atkbd_attr_set.attr,
+ &atkbd_attr_softrepeat.attr,
+ &atkbd_attr_softraw.attr,
+ &atkbd_attr_err_count.attr,
+ NULL
+};
+
+static struct attribute_group atkbd_attribute_group = {
+ .attrs = atkbd_attributes,
+};
+
+static const unsigned int xl_table[] = {
+ ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
+ ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
+};
+
+/*
+ * Checks if we should mangle the scancode to extract 'release' bit
+ * in translated mode.
+ */
+static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
+{
+ int i;
+
+ if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(xl_table); i++)
+ if (code == xl_table[i])
+ return test_bit(i, &xl_bit);
+
+ return true;
+}
+
+/*
+ * Calculates new value of xl_bit so the driver can distinguish
+ * between make/break pair of scancodes for select keys and PS/2
+ * protocol responses.
+ */
+static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
+ if (!((code ^ xl_table[i]) & 0x7f)) {
+ if (code & 0x80)
+ __clear_bit(i, &atkbd->xl_bit);
+ else
+ __set_bit(i, &atkbd->xl_bit);
+ break;
+ }
+ }
+}
+
+/*
+ * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
+ * keeping kernel 2.4 compatibility for set 2
+ */
+static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
+{
+ if (atkbd->set == 3) {
+ if (atkbd->emul == 1)
+ code |= 0x100;
+ } else {
+ code = (code & 0x7f) | ((code & 0x80) << 1);
+ if (atkbd->emul == 1)
+ code |= 0x80;
+ }
+
+ return code;
+}
+
+/*
+ * atkbd_interrupt(). Here takes place processing of data received from
+ * the keyboard into events.
+ */
+
+static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct input_dev *dev = atkbd->dev;
+ unsigned int code = data;
+ int scroll = 0, hscroll = 0, click = -1;
+ int value;
+ unsigned short keycode;
+
+ dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
+
+#if !defined(__i386__) && !defined (__x86_64__)
+ if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
+ dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
+ serio_write(serio, ATKBD_CMD_RESEND);
+ atkbd->resend = true;
+ goto out;
+ }
+
+ if (!flags && data == ATKBD_RET_ACK)
+ atkbd->resend = false;
+#endif
+
+ if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
+ if (ps2_handle_ack(&atkbd->ps2dev, data))
+ goto out;
+
+ if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
+ if (ps2_handle_response(&atkbd->ps2dev, data))
+ goto out;
+
+ if (!atkbd->enabled)
+ goto out;
+
+ input_event(dev, EV_MSC, MSC_RAW, code);
+
+ if (atkbd_platform_scancode_fixup)
+ code = atkbd_platform_scancode_fixup(atkbd, code);
+
+ if (atkbd->translated) {
+
+ if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
+ atkbd->release = code >> 7;
+ code &= 0x7f;
+ }
+
+ if (!atkbd->emul)
+ atkbd_calculate_xl_bit(atkbd, data);
+ }
+
+ switch (code) {
+ case ATKBD_RET_BAT:
+ atkbd->enabled = false;
+ serio_reconnect(atkbd->ps2dev.serio);
+ goto out;
+ case ATKBD_RET_EMUL0:
+ atkbd->emul = 1;
+ goto out;
+ case ATKBD_RET_EMUL1:
+ atkbd->emul = 2;
+ goto out;
+ case ATKBD_RET_RELEASE:
+ atkbd->release = true;
+ goto out;
+ case ATKBD_RET_ACK:
+ case ATKBD_RET_NAK:
+ if (printk_ratelimit())
+ dev_warn(&serio->dev,
+ "Spurious %s on %s. "
+ "Some program might be trying to access hardware directly.\n",
+ data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+ goto out;
+ case ATKBD_RET_ERR:
+ atkbd->err_count++;
+ dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
+ serio->phys);
+ goto out;
+ }
+
+ code = atkbd_compat_scancode(atkbd, code);
+
+ if (atkbd->emul && --atkbd->emul)
+ goto out;
+
+ keycode = atkbd->keycode[code];
+
+ if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
+ if (keycode != ATKBD_KEY_NULL)
+ input_event(dev, EV_MSC, MSC_SCAN, code);
+
+ switch (keycode) {
+ case ATKBD_KEY_NULL:
+ break;
+ case ATKBD_KEY_UNKNOWN:
+ dev_warn(&serio->dev,
+ "Unknown key %s (%s set %d, code %#x on %s).\n",
+ atkbd->release ? "released" : "pressed",
+ atkbd->translated ? "translated" : "raw",
+ atkbd->set, code, serio->phys);
+ dev_warn(&serio->dev,
+ "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+ code & 0x80 ? "e0" : "", code & 0x7f);
+ input_sync(dev);
+ break;
+ case ATKBD_SCR_1:
+ scroll = 1;
+ break;
+ case ATKBD_SCR_2:
+ scroll = 2;
+ break;
+ case ATKBD_SCR_4:
+ scroll = 4;
+ break;
+ case ATKBD_SCR_8:
+ scroll = 8;
+ break;
+ case ATKBD_SCR_CLICK:
+ click = !atkbd->release;
+ break;
+ case ATKBD_SCR_LEFT:
+ hscroll = -1;
+ break;
+ case ATKBD_SCR_RIGHT:
+ hscroll = 1;
+ break;
+ default:
+ if (atkbd->release) {
+ value = 0;
+ atkbd->last = 0;
+ } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+ /* Workaround Toshiba laptop multiple keypress */
+ value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+ } else {
+ value = 1;
+ atkbd->last = code;
+ atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
+ }
+
+ input_event(dev, EV_KEY, keycode, value);
+ input_sync(dev);
+
+ if (value && test_bit(code, atkbd->force_release_mask)) {
+ input_event(dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(dev, keycode, 0);
+ input_sync(dev);
+ }
+ }
+
+ if (atkbd->scroll) {
+ if (click != -1)
+ input_report_key(dev, BTN_MIDDLE, click);
+ input_report_rel(dev, REL_WHEEL,
+ atkbd->release ? -scroll : scroll);
+ input_report_rel(dev, REL_HWHEEL, hscroll);
+ input_sync(dev);
+ }
+
+ atkbd->release = false;
+out:
+ return IRQ_HANDLED;
+}
+
+static int atkbd_set_repeat_rate(struct atkbd *atkbd)
+{
+ const short period[32] =
+ { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125,
+ 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 };
+ const short delay[4] =
+ { 250, 500, 750, 1000 };
+
+ struct input_dev *dev = atkbd->dev;
+ unsigned char param;
+ int i = 0, j = 0;
+
+ while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD])
+ i++;
+ dev->rep[REP_PERIOD] = period[i];
+
+ while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY])
+ j++;
+ dev->rep[REP_DELAY] = delay[j];
+
+ param = i | (j << 5);
+ return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP);
+}
+
+static int atkbd_set_leds(struct atkbd *atkbd)
+{
+ struct input_dev *dev = atkbd->dev;
+ unsigned char param[2];
+
+ param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
+ | (test_bit(LED_NUML, dev->led) ? 2 : 0)
+ | (test_bit(LED_CAPSL, dev->led) ? 4 : 0);
+ if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+
+ if (atkbd->extra) {
+ param[0] = 0;
+ param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
+ | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0)
+ | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
+ | (test_bit(LED_MISC, dev->led) ? 0x10 : 0)
+ | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0);
+ if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS))
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * atkbd_event_work() is used to complete processing of events that
+ * can not be processed by input_event() which is often called from
+ * interrupt context.
+ */
+
+static void atkbd_event_work(struct work_struct *work)
+{
+ struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
+
+ mutex_lock(&atkbd->mutex);
+
+ if (!atkbd->enabled) {
+ /*
+ * Serio ports are resumed asynchronously so while driver core
+ * thinks that device is already fully operational in reality
+ * it may not be ready yet. In this case we need to keep
+ * rescheduling till reconnect completes.
+ */
+ schedule_delayed_work(&atkbd->event_work,
+ msecs_to_jiffies(100));
+ } else {
+ if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
+ atkbd_set_leds(atkbd);
+
+ if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
+ atkbd_set_repeat_rate(atkbd);
+ }
+
+ mutex_unlock(&atkbd->mutex);
+}
+
+/*
+ * Schedule switch for execution. We need to throttle requests,
+ * otherwise keyboard may become unresponsive.
+ */
+static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit)
+{
+ unsigned long delay = msecs_to_jiffies(50);
+
+ if (time_after(jiffies, atkbd->event_jiffies + delay))
+ delay = 0;
+
+ atkbd->event_jiffies = jiffies;
+ set_bit(event_bit, &atkbd->event_mask);
+ mb();
+ schedule_delayed_work(&atkbd->event_work, delay);
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here. If action can not be performed in
+ * interrupt context it is offloaded to atkbd_event_work.
+ */
+
+static int atkbd_event(struct input_dev *dev,
+ unsigned int type, unsigned int code, int value)
+{
+ struct atkbd *atkbd = input_get_drvdata(dev);
+
+ if (!atkbd->write)
+ return -1;
+
+ switch (type) {
+
+ case EV_LED:
+ atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
+ return 0;
+
+ case EV_REP:
+ if (!atkbd->softrepeat)
+ atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
+ return 0;
+
+ default:
+ return -1;
+ }
+}
+
+/*
+ * atkbd_enable() signals that interrupt handler is allowed to
+ * generate input events.
+ */
+
+static inline void atkbd_enable(struct atkbd *atkbd)
+{
+ serio_pause_rx(atkbd->ps2dev.serio);
+ atkbd->enabled = true;
+ serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+/*
+ * atkbd_disable() tells input handler that all incoming data except
+ * for ACKs and command response should be dropped.
+ */
+
+static inline void atkbd_disable(struct atkbd *atkbd)
+{
+ serio_pause_rx(atkbd->ps2dev.serio);
+ atkbd->enabled = false;
+ serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+static int atkbd_activate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+ dev_err(&ps2dev->serio->dev,
+ "Failed to enable keyboard on %s\n",
+ ps2dev->serio->phys);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * atkbd_deactivate() resets and disables the keyboard from sending
+ * keystrokes.
+ */
+
+static void atkbd_deactivate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
+ dev_err(&ps2dev->serio->dev,
+ "Failed to deactivate keyboard on %s\n",
+ ps2dev->serio->phys);
+}
+
+/*
+ * atkbd_probe() probes for an AT keyboard on a serio port.
+ */
+
+static int atkbd_probe(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[2];
+
+/*
+ * Some systems, where the bit-twiddling when testing the io-lines of the
+ * controller may confuse the keyboard need a full reset of the keyboard. On
+ * these systems the BIOS also usually doesn't do it for us.
+ */
+
+ if (atkbd_reset)
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
+ dev_warn(&ps2dev->serio->dev,
+ "keyboard reset failed on %s\n",
+ ps2dev->serio->phys);
+
+/*
+ * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
+ * Some keyboards report different values, but the first byte is always 0xab or
+ * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this
+ * should make sure we don't try to set the LEDs on it.
+ */
+
+ param[0] = param[1] = 0xa5; /* initialize with invalid values */
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+
+/*
+ * If the get ID command failed, we check if we can at least set the LEDs on
+ * the keyboard. This should work on every keyboard out there. It also turns
+ * the LEDs off, which we want anyway.
+ */
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+ atkbd->id = 0xabba;
+ return 0;
+ }
+
+ if (!ps2_is_keyboard_id(param[0]))
+ return -1;
+
+ atkbd->id = (param[0] << 8) | param[1];
+
+ if (atkbd->id == 0xaca1 && atkbd->translated) {
+ dev_err(&ps2dev->serio->dev,
+ "NCD terminal keyboards are only supported on non-translating controllers. "
+ "Use i8042.direct=1 to disable translation.\n");
+ return -1;
+ }
+
+/*
+ * Make sure nothing is coming from the keyboard and disturbs our
+ * internal state.
+ */
+ if (!atkbd_skip_deactivate)
+ atkbd_deactivate(atkbd);
+
+ return 0;
+}
+
+/*
+ * atkbd_select_set checks if a keyboard has a working Set 3 support, and
+ * sets it into that. Unfortunately there are keyboards that can be switched
+ * to Set 3, but don't work well in that (BTC Multimedia ...)
+ */
+
+static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[2];
+
+ atkbd->extra = false;
+/*
+ * For known special keyboards we can go ahead and set the correct set.
+ * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
+ * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
+ */
+
+ if (atkbd->translated)
+ return 2;
+
+ if (atkbd->id == 0xaca1) {
+ param[0] = 3;
+ ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET);
+ return 3;
+ }
+
+ if (allow_extra) {
+ param[0] = 0x71;
+ if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
+ atkbd->extra = true;
+ return 2;
+ }
+ }
+
+ if (atkbd_terminal) {
+ ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+ return 3;
+ }
+
+ if (target_set != 3)
+ return 2;
+
+ if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) {
+ atkbd->id = param[0] << 8 | param[1];
+ return 2;
+ }
+
+ param[0] = 3;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+ return 2;
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET))
+ return 2;
+
+ if (param[0] != 3) {
+ param[0] = 2;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+ return 2;
+ }
+
+ ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);
+
+ return 3;
+}
+
+static int atkbd_reset_state(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[1];
+
+/*
+ * Set the LEDs to a predefined state (all off).
+ */
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+
+/*
+ * Set autorepeat to fastest possible.
+ */
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
+ * reboot.
+ */
+
+static void atkbd_cleanup(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
+ ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
+}
+
+
+/*
+ * atkbd_disconnect() closes and frees.
+ */
+
+static void atkbd_disconnect(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
+ atkbd_disable(atkbd);
+
+ input_unregister_device(atkbd->dev);
+
+ /*
+ * Make sure we don't have a command in flight.
+ * Note that since atkbd->enabled is false event work will keep
+ * rescheduling itself until it gets canceled and will not try
+ * accessing freed input device or serio port.
+ */
+ cancel_delayed_work_sync(&atkbd->event_work);
+
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(atkbd);
+}
+
+/*
+ * generate release events for the keycodes given in data
+ */
+static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
+ const void *data)
+{
+ const unsigned int *keys = data;
+ unsigned int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; keys[i] != -1U; i++)
+ __set_bit(keys[i], atkbd->force_release_mask);
+}
+
+/*
+ * Most special keys (Fn+F?) on Dell laptops do not generate release
+ * events so we have to do it ourselves.
+ */
+static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
+ 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
+};
+
+/*
+ * Perform fixup for HP system that doesn't generate release
+ * for its video switch
+ */
+static unsigned int atkbd_hp_forced_release_keys[] = {
+ 0x94, -1U
+};
+
+/*
+ * Samsung NC10,NC20 with Fn+F? key release not working
+ */
+static unsigned int atkbd_samsung_forced_release_keys[] = {
+ 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
+};
+
+/*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+ 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+ 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
+/*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+ 0xa0, 0xae, 0xb0, -1U
+};
+
+/*
+ * Many notebooks don't send key release event for volume up/down
+ * keys, with key list below common among them
+ */
+static unsigned int atkbd_volume_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
+
+/*
+ * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
+ * they should be generating e4-e6 (0x80 | code).
+ */
+static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
+ unsigned int code)
+{
+ if (atkbd->translated && atkbd->emul == 1 &&
+ (code == 0x64 || code == 0x65 || code == 0x66)) {
+ atkbd->emul = 0;
+ code |= 0x80;
+ }
+
+ return code;
+}
+
+/*
+ * atkbd_set_keycode_table() initializes keyboard's keycode table
+ * according to the selected scancode set
+ */
+
+static void atkbd_set_keycode_table(struct atkbd *atkbd)
+{
+ unsigned int scancode;
+ int i, j;
+
+ memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+ bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
+
+ if (atkbd->translated) {
+ for (i = 0; i < 128; i++) {
+ scancode = atkbd_unxlate_table[i];
+ atkbd->keycode[i] = atkbd_set2_keycode[scancode];
+ atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80];
+ if (atkbd->scroll)
+ for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++)
+ if ((scancode | 0x80) == atkbd_scroll_keys[j].set2)
+ atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+ }
+ } else if (atkbd->set == 3) {
+ memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
+ } else {
+ memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+
+ if (atkbd->scroll)
+ for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) {
+ scancode = atkbd_scroll_keys[i].set2;
+ atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode;
+ }
+ }
+
+/*
+ * HANGEUL and HANJA keys do not send release events so we need to
+ * generate such events ourselves
+ */
+ scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL);
+ atkbd->keycode[scancode] = KEY_HANGEUL;
+ __set_bit(scancode, atkbd->force_release_mask);
+
+ scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA);
+ atkbd->keycode[scancode] = KEY_HANJA;
+ __set_bit(scancode, atkbd->force_release_mask);
+
+/*
+ * Perform additional fixups
+ */
+ if (atkbd_platform_fixup)
+ atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
+}
+
+/*
+ * atkbd_set_device_attrs() sets up keyboard's input device structure
+ */
+
+static void atkbd_set_device_attrs(struct atkbd *atkbd)
+{
+ struct input_dev *input_dev = atkbd->dev;
+ int i;
+
+ if (atkbd->extra)
+ snprintf(atkbd->name, sizeof(atkbd->name),
+ "AT Set 2 Extra keyboard");
+ else
+ snprintf(atkbd->name, sizeof(atkbd->name),
+ "AT %s Set %d keyboard",
+ atkbd->translated ? "Translated" : "Raw", atkbd->set);
+
+ snprintf(atkbd->phys, sizeof(atkbd->phys),
+ "%s/input0", atkbd->ps2dev.serio->phys);
+
+ input_dev->name = atkbd->name;
+ input_dev->phys = atkbd->phys;
+ input_dev->id.bustype = BUS_I8042;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
+ input_dev->id.version = atkbd->id;
+ input_dev->event = atkbd_event;
+ input_dev->dev.parent = &atkbd->ps2dev.serio->dev;
+
+ input_set_drvdata(input_dev, atkbd);
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+ BIT_MASK(EV_MSC);
+
+ if (atkbd->write) {
+ input_dev->evbit[0] |= BIT_MASK(EV_LED);
+ input_dev->ledbit[0] = BIT_MASK(LED_NUML) |
+ BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL);
+ }
+
+ if (atkbd->extra)
+ input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) |
+ BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) |
+ BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC);
+
+ if (!atkbd->softrepeat) {
+ input_dev->rep[REP_DELAY] = 250;
+ input_dev->rep[REP_PERIOD] = 33;
+ }
+
+ input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) :
+ BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN);
+
+ if (atkbd->scroll) {
+ input_dev->evbit[0] |= BIT_MASK(EV_REL);
+ input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
+ BIT_MASK(REL_HWHEEL);
+ __set_bit(BTN_MIDDLE, input_dev->keybit);
+ }
+
+ input_dev->keycode = atkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned short);
+ input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+
+ for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
+ if (atkbd->keycode[i] != KEY_RESERVED &&
+ atkbd->keycode[i] != ATKBD_KEY_NULL &&
+ atkbd->keycode[i] < ATKBD_SPECIAL) {
+ __set_bit(atkbd->keycode[i], input_dev->keybit);
+ }
+ }
+}
+
+/*
+ * atkbd_connect() is called when the serio module finds an interface
+ * that isn't handled yet by an appropriate device driver. We check if
+ * there is an AT keyboard out there and if yes, we register ourselves
+ * to the input module.
+ */
+
+static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct atkbd *atkbd;
+ struct input_dev *dev;
+ int err = -ENOMEM;
+
+ atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
+ dev = input_allocate_device();
+ if (!atkbd || !dev)
+ goto fail1;
+
+ atkbd->dev = dev;
+ ps2_init(&atkbd->ps2dev, serio);
+ INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
+ mutex_init(&atkbd->mutex);
+
+ switch (serio->id.type) {
+
+ case SERIO_8042_XL:
+ atkbd->translated = true;
+ /* Fall through */
+
+ case SERIO_8042:
+ if (serio->write)
+ atkbd->write = true;
+ break;
+ }
+
+ atkbd->softraw = atkbd_softraw;
+ atkbd->softrepeat = atkbd_softrepeat;
+ atkbd->scroll = atkbd_scroll;
+
+ if (atkbd->softrepeat)
+ atkbd->softraw = true;
+
+ serio_set_drvdata(serio, atkbd);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ if (atkbd->write) {
+
+ if (atkbd_probe(atkbd)) {
+ err = -ENODEV;
+ goto fail3;
+ }
+
+ atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
+ atkbd_reset_state(atkbd);
+
+ } else {
+ atkbd->set = 2;
+ atkbd->id = 0xab00;
+ }
+
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group);
+ if (err)
+ goto fail3;
+
+ atkbd_enable(atkbd);
+ if (serio->write)
+ atkbd_activate(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err)
+ goto fail4;
+
+ return 0;
+
+ fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(dev);
+ kfree(atkbd);
+ return err;
+}
+
+/*
+ * atkbd_reconnect() tries to restore keyboard into a sane state and is
+ * most likely called on resume.
+ */
+
+static int atkbd_reconnect(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct serio_driver *drv = serio->drv;
+ int retval = -1;
+
+ if (!atkbd || !drv) {
+ dev_dbg(&serio->dev,
+ "reconnect request, but serio is disconnected, ignoring...\n");
+ return -1;
+ }
+
+ mutex_lock(&atkbd->mutex);
+
+ atkbd_disable(atkbd);
+
+ if (atkbd->write) {
+ if (atkbd_probe(atkbd))
+ goto out;
+
+ if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
+ goto out;
+
+ /*
+ * Restore LED state and repeat rate. While input core
+ * will do this for us at resume time reconnect may happen
+ * because user requested it via sysfs or simply because
+ * keyboard was unplugged and plugged in again so we need
+ * to do it ourselves here.
+ */
+ atkbd_set_leds(atkbd);
+ if (!atkbd->softrepeat)
+ atkbd_set_repeat_rate(atkbd);
+
+ }
+
+ /*
+ * Reset our state machine in case reconnect happened in the middle
+ * of multi-byte scancode.
+ */
+ atkbd->xl_bit = 0;
+ atkbd->emul = 0;
+
+ atkbd_enable(atkbd);
+ if (atkbd->write)
+ atkbd_activate(atkbd);
+
+ retval = 0;
+
+ out:
+ mutex_unlock(&atkbd->mutex);
+ return retval;
+}
+
+static const struct serio_device_id atkbd_serio_ids[] = {
+ {
+ .type = SERIO_8042,
+ .proto = SERIO_ANY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ {
+ .type = SERIO_8042_XL,
+ .proto = SERIO_ANY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_PS2SER,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, atkbd_serio_ids);
+
+static struct serio_driver atkbd_drv = {
+ .driver = {
+ .name = "atkbd",
+ },
+ .description = DRIVER_DESC,
+ .id_table = atkbd_serio_ids,
+ .interrupt = atkbd_interrupt,
+ .connect = atkbd_connect,
+ .reconnect = atkbd_reconnect,
+ .disconnect = atkbd_disconnect,
+ .cleanup = atkbd_cleanup,
+};
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+ ssize_t (*handler)(struct atkbd *, char *))
+{
+ struct serio *serio = to_serio_port(dev);
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ return handler(atkbd, buf);
+}
+
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+ ssize_t (*handler)(struct atkbd *, const char *, size_t))
+{
+ struct serio *serio = to_serio_port(dev);
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ int retval;
+
+ retval = mutex_lock_interruptible(&atkbd->mutex);
+ if (retval)
+ return retval;
+
+ atkbd_disable(atkbd);
+ retval = handler(atkbd, buf, count);
+ atkbd_enable(atkbd);
+
+ mutex_unlock(&atkbd->mutex);
+
+ return retval;
+}
+
+static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
+}
+
+static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ struct input_dev *old_dev, *new_dev;
+ unsigned int value;
+ int err;
+ bool old_extra;
+ unsigned char old_set;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
+ return -EINVAL;
+
+ if (atkbd->extra != value) {
+ /*
+ * Since device's properties will change we need to
+ * unregister old device. But allocate and register
+ * new one first to make sure we have it.
+ */
+ old_dev = atkbd->dev;
+ old_extra = atkbd->extra;
+ old_set = atkbd->set;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+ atkbd_reset_state(atkbd);
+ atkbd_activate(atkbd);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf)
+{
+ size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
+ ATKBD_KEYMAP_SIZE, atkbd->force_release_mask);
+
+ buf[len++] = '\n';
+ buf[len] = '\0';
+
+ return len;
+}
+
+static ssize_t atkbd_set_force_release(struct atkbd *atkbd,
+ const char *buf, size_t count)
+{
+ /* 64 bytes on stack should be acceptable */
+ DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE);
+ int err;
+
+ err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE);
+ if (err)
+ return err;
+
+ memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask));
+ return count;
+}
+
+
+static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
+}
+
+static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ struct input_dev *old_dev, *new_dev;
+ unsigned int value;
+ int err;
+ bool old_scroll;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
+ return -EINVAL;
+
+ if (atkbd->scroll != value) {
+ old_dev = atkbd->dev;
+ old_scroll = atkbd->scroll;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->scroll = value;
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->scroll = old_scroll;
+ atkbd->dev = old_dev;
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->set);
+}
+
+static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ struct input_dev *old_dev, *new_dev;
+ unsigned int value;
+ int err;
+ unsigned char old_set;
+ bool old_extra;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value != 2 && value != 3)
+ return -EINVAL;
+
+ if (atkbd->set != value) {
+ old_dev = atkbd->dev;
+ old_extra = atkbd->extra;
+ old_set = atkbd->set;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+ atkbd_reset_state(atkbd);
+ atkbd_activate(atkbd);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ struct input_dev *old_dev, *new_dev;
+ unsigned int value;
+ int err;
+ bool old_softrepeat, old_softraw;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
+ return -EINVAL;
+
+ if (atkbd->softrepeat != value) {
+ old_dev = atkbd->dev;
+ old_softrepeat = atkbd->softrepeat;
+ old_softraw = atkbd->softraw;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->softrepeat = value;
+ if (atkbd->softrepeat)
+ atkbd->softraw = true;
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->softrepeat = old_softrepeat;
+ atkbd->softraw = old_softraw;
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+ }
+ return count;
+}
+
+
+static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ struct input_dev *old_dev, *new_dev;
+ unsigned int value;
+ int err;
+ bool old_softraw;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
+ return -EINVAL;
+
+ if (atkbd->softraw != value) {
+ old_dev = atkbd->dev;
+ old_softraw = atkbd->softraw;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->softraw = value;
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->softraw = old_softraw;
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%lu\n", atkbd->err_count);
+}
+
+static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
+{
+ atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
+ atkbd_platform_fixup_data = id->driver_data;
+
+ return 1;
+}
+
+static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
+{
+ atkbd_platform_scancode_fixup = id->driver_data;
+
+ return 1;
+}
+
+static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
+{
+ atkbd_skip_deactivate = true;
+ return 1;
+}
+
+/*
+ * NOTE: do not add any more "force release" quirks to this table. The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
+static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_dell_laptop_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_dell_laptop_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ /* Inventec Symphony */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ /* Samsung NC10 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ /* Samsung NC20 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ /* Samsung SQ45S70S */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ /* Fujitsu Amilo PA 1510 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_volume_forced_release_keys,
+ },
+ {
+ /* Fujitsu Amilo Pi 3525 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_pi3525_forced_release_keys,
+ },
+ {
+ /* Fujitsu Amilo Xi 3650 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_xi3650_forced_release_keys,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkdb_soltech_ta12_forced_release_keys,
+ },
+ {
+ /* OQO Model 01+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+ },
+ .callback = atkbd_setup_scancode_fixup,
+ .driver_data = atkbd_oqo_01plus_scancode_fixup,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+ },
+ .callback = atkbd_deactivate_fixup,
+ },
+ { }
+};
+
+static int __init atkbd_init(void)
+{
+ dmi_check_system(atkbd_dmi_quirk_table);
+
+ return serio_register_driver(&atkbd_drv);
+}
+
+static void __exit atkbd_exit(void)
+{
+ serio_unregister_driver(&atkbd_drv);
+}
+
+module_init(atkbd_init);
+module_exit(atkbd_exit);