[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/input/keyboard/stmpe-keypad.c b/src/kernel/linux/v4.14/drivers/input/keyboard/stmpe-keypad.c
new file mode 100644
index 0000000..8c6c0b9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/input/keyboard/stmpe-keypad.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL 0x60
+#define STMPE_KPC_ROW_MSB 0x61
+#define STMPE_KPC_ROW_LSB 0x62
+#define STMPE_KPC_CTRL_MSB 0x63
+#define STMPE_KPC_CTRL_LSB 0x64
+#define STMPE_KPC_COMBI_KEY_0 0x65
+#define STMPE_KPC_COMBI_KEY_1 0x66
+#define STMPE_KPC_COMBI_KEY_2 0x67
+#define STMPE_KPC_DATA_BYTE0 0x68
+#define STMPE_KPC_DATA_BYTE1 0x69
+#define STMPE_KPC_DATA_BYTE2 0x6a
+#define STMPE_KPC_DATA_BYTE3 0x6b
+#define STMPE_KPC_DATA_BYTE4 0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS 0xff
+
+#define STMPE_KPC_DATA_UP (0x1 << 7)
+#define STMPE_KPC_DATA_ROW (0xf << 3)
+#define STMPE_KPC_DATA_COL (0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK 0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE 127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT 15
+
+#define STMPE_KEYPAD_MAX_ROWS 8
+#define STMPE_KEYPAD_MAX_COLS 8
+#define STMPE_KEYPAD_ROW_SHIFT 3
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
+ (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ * auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+ bool auto_increment;
+ bool set_pullup;
+ int num_data;
+ int num_normal_data;
+ int max_cols;
+ int max_rows;
+ unsigned int col_gpios;
+ unsigned int row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+ [STMPE1601] = {
+ .auto_increment = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 8,
+ .col_gpios = 0x000ff, /* GPIO 0 - 7 */
+ .row_gpios = 0x0ff00, /* GPIO 8 - 15 */
+ },
+ [STMPE2401] = {
+ .auto_increment = false,
+ .set_pullup = true,
+ .num_data = 3,
+ .num_normal_data = 2,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */
+ },
+ [STMPE2403] = {
+ .auto_increment = true,
+ .set_pullup = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ },
+};
+
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms. Maximum is
+ * %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
+struct stmpe_keypad {
+ struct stmpe *stmpe;
+ struct input_dev *input;
+ const struct stmpe_keypad_variant *variant;
+ unsigned int debounce_ms;
+ unsigned int scan_count;
+ bool no_autorepeat;
+ unsigned int rows;
+ unsigned int cols;
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+ int i;
+
+ if (variant->auto_increment)
+ return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+ variant->num_data, data);
+
+ for (i = 0; i < variant->num_data; i++) {
+ ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+ if (ret < 0)
+ return ret;
+
+ data[i] = ret;
+ }
+
+ return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+ struct stmpe_keypad *keypad = dev;
+ struct input_dev *input = keypad->input;
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ u8 fifo[variant->num_data];
+ int ret;
+ int i;
+
+ ret = stmpe_keypad_read_data(keypad, fifo);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < variant->num_normal_data; i++) {
+ u8 data = fifo[i];
+ int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+ int col = data & STMPE_KPC_DATA_COL;
+ int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+ bool up = data & STMPE_KPC_DATA_UP;
+
+ if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+ == STMPE_KPC_DATA_NOKEY_MASK)
+ continue;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, keypad->keymap[code], !up);
+ input_sync(input);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ unsigned int col_gpios = variant->col_gpios;
+ unsigned int row_gpios = variant->row_gpios;
+ struct stmpe *stmpe = keypad->stmpe;
+ u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
+ unsigned int pins = 0;
+ unsigned int pu_pins = 0;
+ int ret;
+ int i;
+
+ /*
+ * Figure out which pins need to be set to the keypad alternate
+ * function.
+ *
+ * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+ * for the keypad.
+ *
+ * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+ * for the keypad) are used on the board.
+ */
+
+ for (i = 0; i < variant->max_cols; i++) {
+ int num = __ffs(col_gpios);
+
+ if (keypad->cols & (1 << i)) {
+ pins |= 1 << num;
+ pu_pins |= 1 << num;
+ }
+
+ col_gpios &= ~(1 << num);
+ }
+
+ for (i = 0; i < variant->max_rows; i++) {
+ int num = __ffs(row_gpios);
+
+ if (keypad->rows & (1 << i))
+ pins |= 1 << num;
+
+ row_gpios &= ~(1 << num);
+ }
+
+ ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ if (ret)
+ return ret;
+
+ /*
+ * On STMPE24xx, set pin bias to pull-up on all keypad input
+ * pins (columns), this incidentally happen to be maximum 8 pins
+ * and placed at GPIO0-7 so only the LSB of the pull up register
+ * ever needs to be written.
+ */
+ if (variant->set_pullup) {
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe, pureg);
+ if (ret)
+ return ret;
+
+ /* Do not touch unused pins, may be used for GPIO */
+ val = ret & ~pu_pins;
+ val |= pu_pins;
+
+ ret = stmpe_reg_write(stmpe, pureg, val);
+ }
+
+ return 0;
+}
+
+static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+
+ if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ return -EINVAL;
+
+ if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ return -EINVAL;
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_keypad_altfunc_init(keypad);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+ if (ret < 0)
+ return ret;
+
+ if (variant->max_rows > 8) {
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+ STMPE_KPC_ROW_MSB_ROWS,
+ keypad->rows >> 8);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+ STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+ keypad->scan_count << 4);
+ if (ret < 0)
+ return ret;
+
+ return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ STMPE_KPC_CTRL_LSB_DEBOUNCE,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ (keypad->debounce_ms << 1));
+}
+
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+ u32 used_rows, u32 used_cols)
+{
+ int row, col;
+
+ for (row = 0; row < used_rows; row++) {
+ for (col = 0; col < used_cols; col++) {
+ int code = MATRIX_SCAN_CODE(row, col,
+ STMPE_KEYPAD_ROW_SHIFT);
+ if (keypad->keymap[code] != KEY_RESERVED) {
+ keypad->rows |= 1 << row;
+ keypad->cols |= 1 << col;
+ }
+ }
+ }
+}
+
+static int stmpe_keypad_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *np = pdev->dev.of_node;
+ struct stmpe_keypad *keypad;
+ struct input_dev *input;
+ u32 rows;
+ u32 cols;
+ int error;
+ int irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad),
+ GFP_KERNEL);
+ if (!keypad)
+ return -ENOMEM;
+
+ keypad->stmpe = stmpe;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+ of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+ keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input->name = "STMPE keypad";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &pdev->dev;
+
+ error = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
+ if (error)
+ return error;
+
+ error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
+ keypad->keymap, input);
+ if (error)
+ return error;
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ if (!keypad->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ stmpe_keypad_fill_used_pins(keypad, rows, cols);
+
+ keypad->input = input;
+
+ error = stmpe_keypad_chip_init(keypad);
+ if (error < 0)
+ return error;
+
+ error = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, stmpe_keypad_irq,
+ IRQF_ONESHOT, "stmpe-keypad", keypad);
+ if (error) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", error);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+}
+
+static int stmpe_keypad_remove(struct platform_device *pdev)
+{
+ struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+
+ stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD);
+
+ return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+ .driver.name = "stmpe-keypad",
+ .driver.owner = THIS_MODULE,
+ .probe = stmpe_keypad_probe,
+ .remove = stmpe_keypad_remove,
+};
+module_platform_driver(stmpe_keypad_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");