[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/input/serio/Kconfig b/src/kernel/linux/v4.14/drivers/input/serio/Kconfig
new file mode 100644
index 0000000..21488c0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/input/serio/Kconfig
@@ -0,0 +1,320 @@
+#
+# Input core configuration
+#
+config SERIO
+ tristate "Serial I/O support"
+ default y
+ help
+ Say Yes here if you have any input device that uses serial I/O to
+ communicate with the system. This includes the
+ * standard AT keyboard and PS/2 mouse *
+ as well as serial mice, Sun keyboards, some joysticks and 6dof
+ devices and more.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called serio.
+
+config ARCH_MIGHT_HAVE_PC_SERIO
+ bool
+ help
+ Select this config option from the architecture Kconfig if
+ the architecture might use a PC serio device (i8042) to
+ communicate with keyboard, mouse, etc.
+
+if SERIO
+
+config SERIO_I8042
+ tristate "i8042 PC Keyboard controller"
+ default y
+ depends on ARCH_MIGHT_HAVE_PC_SERIO
+ help
+ i8042 is the chip over which the standard AT keyboard and PS/2
+ mouse are connected to the computer. If you use these devices,
+ you'll need to say Y here.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i8042.
+
+config SERIO_SERPORT
+ tristate "Serial port line discipline"
+ default y
+ depends on TTY
+ help
+ Say Y here if you plan to use an input device (mouse, joystick,
+ tablet, 6dof) that communicates over the RS232 serial (COM) port.
+
+ More information is available: <file:Documentation/input/input.txt>
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called serport.
+
+config SERIO_CT82C710
+ tristate "ct82c710 Aux port controller"
+ depends on X86
+ help
+ Say Y here if you have a Texas Instruments TravelMate notebook
+ equipped with the ct82c710 chip and want to use a mouse connected
+ to the "QuickPort".
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ct82c710.
+
+config SERIO_Q40KBD
+ tristate "Q40 keyboard controller"
+ depends on Q40
+
+config SERIO_PARKBD
+ tristate "Parallel port keyboard adapter"
+ depends on PARPORT
+ help
+ Say Y here if you built a simple parallel port adapter to attach
+ an additional AT keyboard, XT keyboard or PS/2 mouse.
+
+ More information is available: <file:Documentation/input/input.txt>
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called parkbd.
+
+config SERIO_RPCKBD
+ tristate "Acorn RiscPC keyboard controller"
+ depends on ARCH_ACORN
+ default y
+ help
+ Say Y here if you have the Acorn RiscPC and want to use an AT
+ keyboard connected to its keyboard controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rpckbd.
+
+config SERIO_AT32PSIF
+ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
+ depends on AVR32
+ help
+ Say Y here if you want to use the PSIF peripheral on AVR32 devices
+ and connect a PS/2 keyboard and/or mouse to it.
+
+ To compile this driver as a module, choose M here: the module will
+ be called at32psif.
+
+config SERIO_AMBAKMI
+ tristate "AMBA KMI keyboard controller"
+ depends on ARM_AMBA
+
+config SERIO_SA1111
+ tristate "Intel SA1111 keyboard controller"
+ depends on SA1111
+
+config SERIO_GSCPS2
+ tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
+ depends on GSC
+ default y
+ help
+ This driver provides support for the PS/2 ports on PA-RISC machines
+ over which HP PS/2 keyboards and PS/2 mice may be connected.
+ If you use these devices, you'll need to say Y here.
+
+ It's safe to enable this driver, so if unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gscps2.
+
+config HP_SDC
+ tristate "HP System Device Controller i8042 Support"
+ depends on (GSC || HP300) && SERIO
+ default y
+ help
+ This option enables support for the "System Device
+ Controller", an i8042 carrying microcode to manage a
+ few miscellaneous devices on some Hewlett Packard systems.
+ The SDC itself contains a 10ms resolution timer/clock capable
+ of delivering interrupts on a periodic and one-shot basis.
+ The SDC may also be connected to a battery-backed real-time
+ clock, a basic audio waveform generator, and an HP-HIL Master
+ Link Controller serving up to seven input devices.
+
+ By itself this option is rather useless, but enabling it will
+ enable selection of drivers for the abovementioned devices.
+ It is, however, incompatible with the old, reliable HIL keyboard
+ driver, and the new HIL driver is experimental, so if you plan
+ to use a HIL keyboard as your primary keyboard, you may wish
+ to keep using that driver until the new HIL drivers have had
+ more testing.
+
+config HIL_MLC
+ tristate "HIL MLC Support (needed for HIL input devices)"
+ depends on HP_SDC
+
+config SERIO_PCIPS2
+ tristate "PCI PS/2 keyboard and PS/2 mouse controller"
+ depends on PCI
+ help
+ Say Y here if you have a Mobility Docking station with PS/2
+ keyboard and mice ports.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcips2.
+
+config SERIO_MACEPS2
+ tristate "SGI O2 MACE PS/2 controller"
+ depends on SGI_IP32
+ help
+ Say Y here if you have SGI O2 workstation and want to use its
+ PS/2 ports.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maceps2.
+
+config SERIO_LIBPS2
+ tristate "PS/2 driver library"
+ depends on SERIO_I8042 || SERIO_I8042=n
+ help
+ Say Y here if you are using a driver for device connected
+ to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called libps2.
+
+config SERIO_RAW
+ tristate "Raw access to serio ports"
+ help
+ Say Y here if you want to have raw access to serio ports, such as
+ AUX ports on i8042 keyboard controller. Each serio port that is
+ bound to this driver will be accessible via a char device with
+ major 10 and dynamically allocated minor. The driver will try
+ allocating minor 1 (that historically corresponds to /dev/psaux)
+ first. To bind this driver to a serio port use sysfs interface:
+
+ echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
+
+ To compile this driver as a module, choose M here: the
+ module will be called serio_raw.
+
+config SERIO_XILINX_XPS_PS2
+ tristate "Xilinx XPS PS/2 Controller Support"
+ depends on PPC || MICROBLAZE
+ help
+ This driver supports XPS PS/2 IP from the Xilinx EDK on
+ PowerPC platform.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xilinx_ps2.
+
+config SERIO_ALTERA_PS2
+ tristate "Altera UP PS/2 controller"
+ depends on HAS_IOMEM
+ help
+ Say Y here if you have Altera University Program PS/2 ports.
+
+ To compile this driver as a module, choose M here: the
+ module will be called altera_ps2.
+
+config SERIO_AMS_DELTA
+ tristate "Amstrad Delta (E3) mailboard support"
+ depends on MACH_AMS_DELTA
+ default y
+ ---help---
+ Say Y here if you have an E3 and want to use its mailboard,
+ or any standard AT keyboard connected to the mailboard port.
+
+ When used for the E3 mailboard, a non-standard key table
+ must be loaded from userspace, possibly using udev extras
+ provided keymap helper utility.
+
+ To compile this driver as a module, choose M here;
+ the module will be called ams_delta_serio.
+
+config SERIO_PS2MULT
+ tristate "TQC PS/2 multiplexer"
+ help
+ Say Y here if you have the PS/2 line multiplexer like the one
+ present on TQC boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ps2mult.
+
+config SERIO_ARC_PS2
+ tristate "ARC PS/2 support"
+ depends on HAS_IOMEM
+ help
+ Say Y here if you have an ARC FPGA platform with a PS/2
+ controller in it.
+
+ To compile this driver as a module, choose M here; the module
+ will be called arc_ps2.
+
+config SERIO_APBPS2
+ tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller"
+ depends on OF
+ help
+ Say Y here if you want support for GRLIB APBPS2 peripherals used
+ to connect to PS/2 keyboard and/or mouse.
+
+ To compile this driver as a module, choose M here: the module will
+ be called apbps2.
+
+config SERIO_OLPC_APSP
+ tristate "OLPC AP-SP input support"
+ depends on OLPC || COMPILE_TEST
+ help
+ Say Y here if you want support for the keyboard and touchpad included
+ in the OLPC XO-1.75 and XO-4 laptops.
+
+ To compile this driver as a module, choose M here: the module will
+ be called olpc_apsp.
+
+config HYPERV_KEYBOARD
+ tristate "Microsoft Synthetic Keyboard driver"
+ depends on HYPERV
+ default HYPERV
+ help
+ Select this option to enable the Hyper-V Keyboard driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called hyperv_keyboard.
+
+config SERIO_SUN4I_PS2
+ tristate "Allwinner A10 PS/2 controller support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ help
+ This selects support for the PS/2 Host Controller on
+ Allwinner A10.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sun4i-ps2.
+
+config SERIO_GPIO_PS2
+ tristate "GPIO PS/2 bit banging driver"
+ depends on GPIOLIB
+ help
+ Say Y here if you want PS/2 bit banging support via GPIO.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ps2-gpio.
+
+ If you are unsure, say N.
+
+config USERIO
+ tristate "User space serio port driver support"
+ help
+ Say Y here if you want to support user level drivers for serio
+ subsystem accessible under char device 10:240 - /dev/userio. Using
+ this facility userspace programs can implement serio ports that
+ will be used by the standard in-kernel serio consumer drivers,
+ such as psmouse and atkbd.
+
+ To compile this driver as a module, choose M here: the module will be
+ called userio.
+
+ If you are unsure, say N.
+
+endif