[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/irqchip/irq-mxs.c b/src/kernel/linux/v4.14/drivers/irqchip/irq-mxs.c
new file mode 100644
index 0000000..e8b31f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/irqchip/irq-mxs.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ * Add Alphascale ASM9260 support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <asm/exception.h>
+
+#include "alphascale_asm9260-icoll.h"
+
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
+#define HW_ICOLL_VECTOR 0x0000
+#define HW_ICOLL_LEVELACK 0x0010
+#define HW_ICOLL_CTRL 0x0020
+#define HW_ICOLL_STAT_OFFSET 0x0070
+#define HW_ICOLL_INTERRUPT0 0x0120
+#define HW_ICOLL_INTERRUPTn(n) ((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE BIT(2)
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
+
+#define ICOLL_NUM_IRQS 128
+
+enum icoll_type {
+ ICOLL,
+ ASM9260_ICOLL,
+};
+
+struct icoll_priv {
+ void __iomem *vector;
+ void __iomem *levelack;
+ void __iomem *ctrl;
+ void __iomem *stat;
+ void __iomem *intr;
+ void __iomem *clear;
+ enum icoll_type type;
+};
+
+static struct icoll_priv icoll_priv;
+static struct irq_domain *icoll_domain;
+
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+ /*
+ * mask lower part of hwirq to convert it
+ * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+ */
+ return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+ /* offset = hwirq / intr_per_reg * 0x10 */
+ return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
+static void icoll_ack_irq(struct irq_data *d)
+{
+ /*
+ * The Interrupt Collector is able to prioritize irqs.
+ * Currently only level 0 is used. So acking can use
+ * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+ */
+ __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+ icoll_priv.levelack);
+}
+
+static void icoll_mask_irq(struct irq_data *d)
+{
+ __raw_writel(BM_ICOLL_INTR_ENABLE,
+ icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
+}
+
+static void icoll_unmask_irq(struct irq_data *d)
+{
+ __raw_writel(BM_ICOLL_INTR_ENABLE,
+ icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
+}
+
+static void asm9260_mask_irq(struct irq_data *d)
+{
+ __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+ icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+ __raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+ icoll_priv.clear +
+ ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+ __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+ icoll_intr_reg(d) + SET_REG);
+}
+
+static struct irq_chip mxs_icoll_chip = {
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = icoll_mask_irq,
+ .irq_unmask = icoll_unmask_irq,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
+};
+
+static struct irq_chip asm9260_icoll_chip = {
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = asm9260_mask_irq,
+ .irq_unmask = asm9260_unmask_irq,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
+};
+
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
+{
+ u32 irqnr;
+
+ irqnr = __raw_readl(icoll_priv.stat);
+ __raw_writel(irqnr, icoll_priv.vector);
+ handle_domain_irq(icoll_domain, irqnr, regs);
+}
+
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct irq_chip *chip;
+
+ if (icoll_priv.type == ICOLL)
+ chip = &mxs_icoll_chip;
+ else
+ chip = &asm9260_icoll_chip;
+
+ irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops icoll_irq_domain_ops = {
+ .map = icoll_irq_domain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void __init icoll_add_domain(struct device_node *np,
+ int num)
+{
+ icoll_domain = irq_domain_add_linear(np, num,
+ &icoll_irq_domain_ops, NULL);
+
+ if (!icoll_domain)
+ panic("%pOF: unable to create irq domain", np);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+ void __iomem *icoll_base;
+
+ icoll_base = of_io_request_and_map(np, 0, np->name);
+ if (IS_ERR(icoll_base))
+ panic("%pOF: unable to map resource", np);
+ return icoll_base;
+}
+
+static int __init icoll_of_init(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ void __iomem *icoll_base;
+
+ icoll_priv.type = ICOLL;
+
+ icoll_base = icoll_init_iobase(np);
+ icoll_priv.vector = icoll_base + HW_ICOLL_VECTOR;
+ icoll_priv.levelack = icoll_base + HW_ICOLL_LEVELACK;
+ icoll_priv.ctrl = icoll_base + HW_ICOLL_CTRL;
+ icoll_priv.stat = icoll_base + HW_ICOLL_STAT_OFFSET;
+ icoll_priv.intr = icoll_base + HW_ICOLL_INTERRUPT0;
+ icoll_priv.clear = NULL;
+
+ /*
+ * Interrupt Collector reset, which initializes the priority
+ * for each irq to level 0.
+ */
+ stmp_reset_block(icoll_priv.ctrl);
+
+ icoll_add_domain(np, ICOLL_NUM_IRQS);
+
+ return 0;
+}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ void __iomem *icoll_base;
+ int i;
+
+ icoll_priv.type = ASM9260_ICOLL;
+
+ icoll_base = icoll_init_iobase(np);
+ icoll_priv.vector = icoll_base + ASM9260_HW_ICOLL_VECTOR;
+ icoll_priv.levelack = icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+ icoll_priv.ctrl = icoll_base + ASM9260_HW_ICOLL_CTRL;
+ icoll_priv.stat = icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+ icoll_priv.intr = icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+ icoll_priv.clear = icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+ writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+ icoll_priv.ctrl);
+ /*
+ * ASM9260 don't provide reset bit. So, we need to set level 0
+ * manually.
+ */
+ for (i = 0; i < 16 * 0x10; i += 0x10)
+ writel(0, icoll_priv.intr + i);
+
+ icoll_add_domain(np, ASM9260_NUM_IRQS);
+ set_handle_irq(icoll_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);