[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/isdn/gigaset/gigaset.h b/src/kernel/linux/v4.14/drivers/isdn/gigaset/gigaset.h
new file mode 100644
index 0000000..166537e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/isdn/gigaset/gigaset.h
@@ -0,0 +1,830 @@
+/*
+ * Siemens Gigaset 307x driver
+ * Common header file for all connection variants
+ *
+ * Written by Stefan Eilers
+ * and Hansjoerg Lipp <hjlipp@web.de>
+ *
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#ifndef GIGASET_H
+#define GIGASET_H
+
+/* define global prefix for pr_ macros in linux/kernel.h */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ppp_defs.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/list.h>
+#include <linux/atomic.h>
+
+#define GIG_VERSION {0, 5, 0, 0}
+#define GIG_COMPAT {0, 4, 0, 0}
+
+#define MAX_REC_PARAMS 10 /* Max. number of params in response string */
+#define MAX_RESP_SIZE 511 /* Max. size of a response string */
+
+#define MAX_EVENTS 64 /* size of event queue */
+
+#define RBUFSIZE 8192
+
+#define GIG_TICK 100 /* in milliseconds */
+
+/* timeout values (unit: 1 sec) */
+#define INIT_TIMEOUT 1
+
+/* timeout values (unit: 0.1 sec) */
+#define RING_TIMEOUT 3 /* for additional parameters to RING */
+#define BAS_TIMEOUT 20 /* for response to Base USB ops */
+#define ATRDY_TIMEOUT 3 /* for HD_READY_SEND_ATDATA */
+
+#define BAS_RETRY 3 /* max. retries for base USB ops */
+
+#define MAXACT 3
+
+extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */
+
+/* debug flags, combine by adding/bitwise OR */
+enum debuglevel {
+ DEBUG_INTR = 0x00008, /* interrupt processing */
+ DEBUG_CMD = 0x00020, /* sent/received LL commands */
+ DEBUG_STREAM = 0x00040, /* application data stream I/O events */
+ DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
+ DEBUG_LLDATA = 0x00100, /* sent/received LL data */
+ DEBUG_EVENT = 0x00200, /* event processing */
+ DEBUG_HDLC = 0x00800, /* M10x HDLC processing */
+ DEBUG_CHANNEL = 0x01000, /* channel allocation/deallocation */
+ DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */
+ DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
+ DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data
+ structures */
+ DEBUG_SUSPEND = 0x10000, /* suspend/resume processing */
+ DEBUG_OUTPUT = 0x20000, /* output to device */
+ DEBUG_ISO = 0x40000, /* isochronous transfers */
+ DEBUG_IF = 0x80000, /* character device operations */
+ DEBUG_USBREQ = 0x100000, /* USB communication (except payload
+ data) */
+ DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when
+ MS_LOCKED */
+
+ DEBUG_ANY = 0x3fffff, /* print message if any of the others is
+ activated */
+};
+
+#ifdef CONFIG_GIGASET_DEBUG
+
+#define gig_dbg(level, format, arg...) \
+ do { \
+ if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
+ printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
+ ## arg); \
+ } while (0)
+#define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
+
+#else
+
+#define gig_dbg(level, format, arg...) do {} while (0)
+#define DEBUG_DEFAULT 0
+
+#endif
+
+void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
+ size_t len, const unsigned char *buf);
+
+/* connection state */
+#define ZSAU_NONE 0
+#define ZSAU_PROCEEDING 1
+#define ZSAU_CALL_DELIVERED 2
+#define ZSAU_ACTIVE 3
+#define ZSAU_DISCONNECT_IND 4
+#define ZSAU_NULL 5
+#define ZSAU_DISCONNECT_REQ 6
+#define ZSAU_UNKNOWN -1
+
+/* USB control transfer requests */
+#define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
+#define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
+
+/* interrupt pipe messages */
+#define HD_B1_FLOW_CONTROL 0x80
+#define HD_B2_FLOW_CONTROL 0x81
+#define HD_RECEIVEATDATA_ACK (0x35) /* 3070 */
+#define HD_READY_SEND_ATDATA (0x36) /* 3070 */
+#define HD_OPEN_ATCHANNEL_ACK (0x37) /* 3070 */
+#define HD_CLOSE_ATCHANNEL_ACK (0x38) /* 3070 */
+#define HD_DEVICE_INIT_OK (0x11) /* ISurf USB + 3070 */
+#define HD_OPEN_B1CHANNEL_ACK (0x51) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL_ACK (0x52) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL_ACK (0x53) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL_ACK (0x54) /* ISurf USB + 3070 */
+#define HD_SUSPEND_END (0x61) /* ISurf USB */
+#define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) /* ISurf USB + 3070 */
+
+/* control requests */
+#define HD_OPEN_B1CHANNEL (0x23) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL (0x24) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL (0x25) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL (0x26) /* ISurf USB + 3070 */
+#define HD_RESET_INTERRUPT_PIPE (0x27) /* ISurf USB + 3070 */
+#define HD_DEVICE_INIT_ACK (0x34) /* ISurf USB + 3070 */
+#define HD_WRITE_ATMESSAGE (0x12) /* 3070 */
+#define HD_READ_ATMESSAGE (0x13) /* 3070 */
+#define HD_OPEN_ATCHANNEL (0x28) /* 3070 */
+#define HD_CLOSE_ATCHANNEL (0x29) /* 3070 */
+
+/* number of B channels supported by base driver */
+#define BAS_CHANNELS 2
+
+/* USB frames for isochronous transfer */
+#define BAS_FRAMETIME 1 /* number of milliseconds between frames */
+#define BAS_NUMFRAMES 8 /* number of frames per URB */
+#define BAS_MAXFRAME 16 /* allocated bytes per frame */
+#define BAS_NORMFRAME 8 /* send size without flow control */
+#define BAS_HIGHFRAME 10 /* " " with positive flow control */
+#define BAS_LOWFRAME 5 /* " " with negative flow control */
+#define BAS_CORRFRAMES 4 /* flow control multiplicator */
+
+#define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES) /* size of isoc in buf
+ * per URB */
+#define BAS_OUTBUFSIZE 4096 /* size of common isoc out buffer */
+#define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isoc out buf */
+
+#define BAS_INURBS 3
+#define BAS_OUTURBS 3
+
+/* variable commands in struct bc_state */
+#define AT_ISO 0
+#define AT_DIAL 1
+#define AT_MSN 2
+#define AT_BC 3
+#define AT_PROTO 4
+#define AT_TYPE 5
+#define AT_CLIP 6
+/* total number */
+#define AT_NUM 7
+
+/* variables in struct at_state_t */
+/* - numeric */
+#define VAR_ZSAU 0
+#define VAR_ZDLE 1
+#define VAR_ZCTP 2
+/* total number */
+#define VAR_NUM 3
+/* - string */
+#define STR_NMBR 0
+#define STR_ZCPN 1
+#define STR_ZCON 2
+#define STR_ZBC 3
+#define STR_ZHLC 4
+/* total number */
+#define STR_NUM 5
+
+/* event types */
+#define EV_TIMEOUT -105
+#define EV_IF_VER -106
+#define EV_PROC_CIDMODE -107
+#define EV_SHUTDOWN -108
+#define EV_START -110
+#define EV_STOP -111
+#define EV_IF_LOCK -112
+#define EV_ACCEPT -114
+#define EV_DIAL -115
+#define EV_HUP -116
+#define EV_BC_OPEN -117
+#define EV_BC_CLOSED -118
+
+/* input state */
+#define INS_command 0x0001 /* receiving messages (not payload data) */
+#define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */
+#define INS_byte_stuff 0x0004
+#define INS_have_data 0x0008
+#define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */
+#define INS_flag_hunt 0x0040
+
+/* channel state */
+#define CHS_D_UP 0x01
+#define CHS_B_UP 0x02
+#define CHS_NOTIFY_LL 0x04
+
+#define ICALL_REJECT 0
+#define ICALL_ACCEPT 1
+#define ICALL_IGNORE 2
+
+/* device state */
+#define MS_UNINITIALIZED 0
+#define MS_INIT 1
+#define MS_LOCKED 2
+#define MS_SHUTDOWN 3
+#define MS_RECOVER 4
+#define MS_READY 5
+
+/* mode */
+#define M_UNKNOWN 0
+#define M_CONFIG 1
+#define M_UNIMODEM 2
+#define M_CID 3
+
+/* start mode */
+#define SM_LOCKED 0
+#define SM_ISDN 1 /* default */
+
+/* layer 2 protocols (AT^SBPR=...) */
+#define L2_BITSYNC 0
+#define L2_HDLC 1
+#define L2_VOICE 2
+
+struct gigaset_ops;
+struct gigaset_driver;
+
+struct usb_cardstate;
+struct ser_cardstate;
+struct bas_cardstate;
+
+struct bc_state;
+struct usb_bc_state;
+struct ser_bc_state;
+struct bas_bc_state;
+
+struct reply_t {
+ int resp_code; /* RSP_XXXX */
+ int min_ConState; /* <0 => ignore */
+ int max_ConState; /* <0 => ignore */
+ int parameter; /* e.g. ZSAU_XXXX <0: ignore*/
+ int new_ConState; /* <0 => ignore */
+ int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/
+ int action[MAXACT]; /* ACT_XXXX */
+ char *command; /* NULL==none */
+};
+
+extern struct reply_t gigaset_tab_cid[];
+extern struct reply_t gigaset_tab_nocid[];
+
+struct inbuf_t {
+ struct cardstate *cs;
+ int inputstate;
+ int head, tail;
+ unsigned char data[RBUFSIZE];
+};
+
+/* isochronous write buffer structure
+ * circular buffer with pad area for extraction of complete USB frames
+ * - data[read..nextread-1] is valid data already submitted to the USB subsystem
+ * - data[nextread..write-1] is valid data yet to be sent
+ * - data[write] is the next byte to write to
+ * - in byte-oriented L2 procotols, it is completely free
+ * - in bit-oriented L2 procotols, it may contain a partial byte of valid data
+ * - data[write+1..read-1] is free
+ * - wbits is the number of valid data bits in data[write], starting at the LSB
+ * - writesem is the semaphore for writing to the buffer:
+ * if writesem <= 0, data[write..read-1] is currently being written to
+ * - idle contains the byte value to repeat when the end of valid data is
+ * reached; if nextread==write (buffer contains no data to send), either the
+ * BAS_OUTBUFPAD bytes immediately before data[write] (if
+ * write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD)
+ * are also filled with that value
+ */
+struct isowbuf_t {
+ int read;
+ int nextread;
+ int write;
+ atomic_t writesem;
+ int wbits;
+ unsigned char data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
+ unsigned char idle;
+};
+
+/* isochronous write URB context structure
+ * data to be stored along with the URB and retrieved when it is returned
+ * as completed by the USB subsystem
+ * - urb: pointer to the URB itself
+ * - bcs: pointer to the B Channel control structure
+ * - limit: end of write buffer area covered by this URB
+ * - status: URB completion status
+ */
+struct isow_urbctx_t {
+ struct urb *urb;
+ struct bc_state *bcs;
+ int limit;
+ int status;
+};
+
+/* AT state structure
+ * data associated with the state of an ISDN connection, whether or not
+ * it is currently assigned a B channel
+ */
+struct at_state_t {
+ struct list_head list;
+ int waiting;
+ int getstring;
+ unsigned timer_index;
+ unsigned long timer_expires;
+ int timer_active;
+ unsigned int ConState; /* State of connection */
+ struct reply_t *replystruct;
+ int cid;
+ int int_var[VAR_NUM]; /* see VAR_XXXX */
+ char *str_var[STR_NUM]; /* see STR_XXXX */
+ unsigned pending_commands; /* see PC_XXXX */
+ unsigned seq_index;
+
+ struct cardstate *cs;
+ struct bc_state *bcs;
+};
+
+struct event_t {
+ int type;
+ void *ptr, *arg;
+ int parameter;
+ int cid;
+ struct at_state_t *at_state;
+};
+
+/* This buffer holds all information about the used B-Channel */
+struct bc_state {
+ struct sk_buff *tx_skb; /* Current transfer buffer to modem */
+ struct sk_buff_head squeue; /* B-Channel send Queue */
+
+ /* Variables for debugging .. */
+ int corrupted; /* Counter for corrupted packages */
+ int trans_down; /* Counter of packages (downstream) */
+ int trans_up; /* Counter of packages (upstream) */
+
+ struct at_state_t at_state;
+
+ /* receive buffer */
+ unsigned rx_bufsize; /* max size accepted by application */
+ struct sk_buff *rx_skb;
+ __u16 rx_fcs;
+ int inputstate; /* see INS_XXXX */
+
+ int channel;
+
+ struct cardstate *cs;
+
+ unsigned chstate; /* bitmap (CHS_*) */
+ int ignore;
+ unsigned proto2; /* layer 2 protocol (L2_*) */
+ char *commands[AT_NUM]; /* see AT_XXXX */
+
+#ifdef CONFIG_GIGASET_DEBUG
+ int emptycount;
+#endif
+ int busy;
+ int use_count;
+
+ /* private data of hardware drivers */
+ union {
+ struct ser_bc_state *ser; /* serial hardware driver */
+ struct usb_bc_state *usb; /* usb hardware driver (m105) */
+ struct bas_bc_state *bas; /* usb hardware driver (base) */
+ } hw;
+
+ void *ap; /* associated LL application */
+ int apconnstate; /* LL application connection state */
+ spinlock_t aplock;
+};
+
+struct cardstate {
+ struct gigaset_driver *driver;
+ unsigned minor_index;
+ struct device *dev;
+ struct device *tty_dev;
+ unsigned flags;
+
+ const struct gigaset_ops *ops;
+
+ /* Stuff to handle communication */
+ wait_queue_head_t waitqueue;
+ int waiting;
+ int mode; /* see M_XXXX */
+ int mstate; /* Modem state: see MS_XXXX */
+ /* only changed by the event layer */
+ int cmd_result;
+
+ int channels;
+ struct bc_state *bcs; /* Array of struct bc_state */
+
+ int onechannel; /* data and commands transmitted in one
+ stream (M10x) */
+
+ spinlock_t lock;
+ struct at_state_t at_state; /* at_state_t for cid == 0 */
+ struct list_head temp_at_states;/* list of temporary "struct
+ at_state_t"s without B channel */
+
+ struct inbuf_t *inbuf;
+
+ struct cmdbuf_t *cmdbuf, *lastcmdbuf;
+ spinlock_t cmdlock;
+ unsigned curlen, cmdbytes;
+
+ struct tty_port port;
+ struct tasklet_struct if_wake_tasklet;
+ unsigned control_state;
+
+ unsigned fwver[4];
+ int gotfwver;
+
+ unsigned running; /* !=0 if events are handled */
+ unsigned connected; /* !=0 if hardware is connected */
+ unsigned isdn_up; /* !=0 after gigaset_isdn_start() */
+
+ unsigned cidmode;
+
+ int myid; /* id for communication with LL */
+ void *iif; /* LL interface structure */
+ unsigned short hw_hdr_len; /* headroom needed in data skbs */
+
+ struct reply_t *tabnocid;
+ struct reply_t *tabcid;
+ int cs_init;
+ int ignoreframes; /* frames to ignore after setting up the
+ B channel */
+ struct mutex mutex; /* locks this structure:
+ * connected is not changed,
+ * hardware_up is not changed,
+ * MState is not changed to or from
+ * MS_LOCKED */
+
+ struct timer_list timer;
+ int retry_count;
+ int dle; /* !=0 if DLE mode is active
+ (ZDLE=1 received -- M10x only) */
+ int cur_at_seq; /* sequence of AT commands being
+ processed */
+ int curchannel; /* channel those commands are meant
+ for */
+ int commands_pending; /* flag(s) in xxx.commands_pending have
+ been set */
+ struct tasklet_struct
+ event_tasklet; /* tasklet for serializing AT commands.
+ * Scheduled
+ * -> for modem reponses (and
+ * incoming data for M10x)
+ * -> on timeout
+ * -> after setting bits in
+ * xxx.at_state.pending_command
+ * (e.g. command from LL) */
+ struct tasklet_struct
+ write_tasklet; /* tasklet for serial output
+ * (not used in base driver) */
+
+ /* event queue */
+ struct event_t events[MAX_EVENTS];
+ unsigned ev_tail, ev_head;
+ spinlock_t ev_lock;
+
+ /* current modem response */
+ unsigned char respdata[MAX_RESP_SIZE + 1];
+ unsigned cbytes;
+
+ /* private data of hardware drivers */
+ union {
+ struct usb_cardstate *usb; /* USB hardware driver (m105) */
+ struct ser_cardstate *ser; /* serial hardware driver */
+ struct bas_cardstate *bas; /* USB hardware driver (base) */
+ } hw;
+};
+
+struct gigaset_driver {
+ struct list_head list;
+ spinlock_t lock; /* locks minor tables and blocked */
+ struct tty_driver *tty;
+ unsigned have_tty;
+ unsigned minor;
+ unsigned minors;
+ struct cardstate *cs;
+ int blocked;
+
+ const struct gigaset_ops *ops;
+ struct module *owner;
+};
+
+struct cmdbuf_t {
+ struct cmdbuf_t *next, *prev;
+ int len, offset;
+ struct tasklet_struct *wake_tasklet;
+ unsigned char buf[0];
+};
+
+struct bas_bc_state {
+ /* isochronous output state */
+ int running;
+ atomic_t corrbytes;
+ spinlock_t isooutlock;
+ struct isow_urbctx_t isoouturbs[BAS_OUTURBS];
+ struct isow_urbctx_t *isooutdone, *isooutfree, *isooutovfl;
+ struct isowbuf_t *isooutbuf;
+ unsigned numsub; /* submitted URB counter
+ (for diagnostic messages only) */
+ struct tasklet_struct sent_tasklet;
+
+ /* isochronous input state */
+ spinlock_t isoinlock;
+ struct urb *isoinurbs[BAS_INURBS];
+ unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
+ struct urb *isoindone; /* completed isoc read URB */
+ int isoinstatus; /* status of completed URB */
+ int loststatus; /* status of dropped URB */
+ unsigned isoinlost; /* number of bytes lost */
+ /* state of bit unstuffing algorithm
+ (in addition to BC_state.inputstate) */
+ unsigned seqlen; /* number of '1' bits not yet
+ unstuffed */
+ unsigned inbyte, inbits; /* collected bits for next byte */
+ /* statistics */
+ unsigned goodbytes; /* bytes correctly received */
+ unsigned alignerrs; /* frames with incomplete byte at end */
+ unsigned fcserrs; /* FCS errors */
+ unsigned frameerrs; /* framing errors */
+ unsigned giants; /* long frames */
+ unsigned runts; /* short frames */
+ unsigned aborts; /* HDLC aborts */
+ unsigned shared0s; /* '0' bits shared between flags */
+ unsigned stolen0s; /* '0' stuff bits also serving as
+ leading flag bits */
+ struct tasklet_struct rcvd_tasklet;
+};
+
+struct gigaset_ops {
+ /* Called from ev-layer.c/interface.c for sending AT commands to the
+ device */
+ int (*write_cmd)(struct cardstate *cs, struct cmdbuf_t *cb);
+
+ /* Called from interface.c for additional device control */
+ int (*write_room)(struct cardstate *cs);
+ int (*chars_in_buffer)(struct cardstate *cs);
+ int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]);
+
+ /* Called from ev-layer.c after setting up connection
+ * Should call gigaset_bchannel_up(), when finished. */
+ int (*init_bchannel)(struct bc_state *bcs);
+
+ /* Called from ev-layer.c after hanging up
+ * Should call gigaset_bchannel_down(), when finished. */
+ int (*close_bchannel)(struct bc_state *bcs);
+
+ /* Called by gigaset_initcs() for setting up bcs->hw.xxx */
+ int (*initbcshw)(struct bc_state *bcs);
+
+ /* Called by gigaset_freecs() for freeing bcs->hw.xxx */
+ void (*freebcshw)(struct bc_state *bcs);
+
+ /* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */
+ void (*reinitbcshw)(struct bc_state *bcs);
+
+ /* Called by gigaset_initcs() for setting up cs->hw.xxx */
+ int (*initcshw)(struct cardstate *cs);
+
+ /* Called by gigaset_freecs() for freeing cs->hw.xxx */
+ void (*freecshw)(struct cardstate *cs);
+
+ /* Called from common.c/interface.c for additional serial port
+ control */
+ int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state,
+ unsigned new_state);
+ int (*baud_rate)(struct cardstate *cs, unsigned cflag);
+ int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
+
+ /* Called from LL interface to put an skb into the send-queue.
+ * After sending is completed, gigaset_skb_sent() must be called
+ * with the skb's link layer header preserved. */
+ int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
+
+ /* Called from ev-layer.c to process a block of data
+ * received through the common/control channel. */
+ void (*handle_input)(struct inbuf_t *inbuf);
+
+};
+
+/* = Common structures and definitions =======================================
+ */
+
+/* Parser states for DLE-Event:
+ * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
+ * <DLE_FLAG>: 0x10
+ * <EVENT>: ((a-z)* | (A-Z)* | (0-10)*)+
+ */
+#define DLE_FLAG 0x10
+
+/* ===========================================================================
+ * Functions implemented in asyncdata.c
+ */
+
+/* Called from LL interface to put an skb into the send queue. */
+int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
+
+/* Called from ev-layer.c to process a block of data
+ * received through the common/control channel. */
+void gigaset_m10x_input(struct inbuf_t *inbuf);
+
+/* ===========================================================================
+ * Functions implemented in isocdata.c
+ */
+
+/* Called from LL interface to put an skb into the send queue. */
+int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
+
+/* Called from ev-layer.c to process a block of data
+ * received through the common/control channel. */
+void gigaset_isoc_input(struct inbuf_t *inbuf);
+
+/* Called from bas-gigaset.c to process a block of data
+ * received through the isochronous channel */
+void gigaset_isoc_receive(unsigned char *src, unsigned count,
+ struct bc_state *bcs);
+
+/* Called from bas-gigaset.c to put a block of data
+ * into the isochronous output buffer */
+int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len);
+
+/* Called from bas-gigaset.c to initialize the isochronous output buffer */
+void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);
+
+/* Called from bas-gigaset.c to retrieve a block of bytes for sending */
+int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
+
+/* ===========================================================================
+ * Functions implemented in LL interface
+ */
+
+/* Called from common.c for setting up/shutting down with the ISDN subsystem */
+void gigaset_isdn_regdrv(void);
+void gigaset_isdn_unregdrv(void);
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregdev(struct cardstate *cs);
+
+/* Called from hardware module to indicate completion of an skb */
+void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_isdn_rcv_err(struct bc_state *bcs);
+
+/* Called from common.c/ev-layer.c to indicate events relevant to the LL */
+void gigaset_isdn_start(struct cardstate *cs);
+void gigaset_isdn_stop(struct cardstate *cs);
+int gigaset_isdn_icall(struct at_state_t *at_state);
+void gigaset_isdn_connD(struct bc_state *bcs);
+void gigaset_isdn_hupD(struct bc_state *bcs);
+void gigaset_isdn_connB(struct bc_state *bcs);
+void gigaset_isdn_hupB(struct bc_state *bcs);
+
+/* ===========================================================================
+ * Functions implemented in ev-layer.c
+ */
+
+/* tasklet called from common.c to process queued events */
+void gigaset_handle_event(unsigned long data);
+
+/* called from isocdata.c / asyncdata.c
+ * when a complete modem response line has been received */
+void gigaset_handle_modem_response(struct cardstate *cs);
+
+/* ===========================================================================
+ * Functions implemented in proc.c
+ */
+
+/* initialize sysfs for device */
+void gigaset_init_dev_sysfs(struct cardstate *cs);
+void gigaset_free_dev_sysfs(struct cardstate *cs);
+
+/* ===========================================================================
+ * Functions implemented in common.c/gigaset.h
+ */
+
+void gigaset_bcs_reinit(struct bc_state *bcs);
+void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
+ struct cardstate *cs, int cid);
+int gigaset_get_channel(struct bc_state *bcs);
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
+void gigaset_free_channel(struct bc_state *bcs);
+int gigaset_get_channels(struct cardstate *cs);
+void gigaset_free_channels(struct cardstate *cs);
+void gigaset_block_channels(struct cardstate *cs);
+
+/* Allocate and initialize driver structure. */
+struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
+ const char *procname,
+ const char *devname,
+ const struct gigaset_ops *ops,
+ struct module *owner);
+
+/* Deallocate driver structure. */
+void gigaset_freedriver(struct gigaset_driver *drv);
+
+struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
+struct cardstate *gigaset_get_cs_by_id(int id);
+void gigaset_blockdriver(struct gigaset_driver *drv);
+
+/* Allocate and initialize card state. Calls hardware dependent
+ gigaset_init[b]cs(). */
+struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
+ int onechannel, int ignoreframes,
+ int cidmode, const char *modulename);
+
+/* Free card state. Calls hardware dependent gigaset_free[b]cs(). */
+void gigaset_freecs(struct cardstate *cs);
+
+/* Tell common.c that hardware and driver are ready. */
+int gigaset_start(struct cardstate *cs);
+
+/* Tell common.c that the device is not present any more. */
+void gigaset_stop(struct cardstate *cs);
+
+/* Tell common.c that the driver is being unloaded. */
+int gigaset_shutdown(struct cardstate *cs);
+
+/* Append event to the queue.
+ * Returns NULL on failure or a pointer to the event on success.
+ * ptr must be kmalloc()ed (and not be freed by the caller).
+ */
+struct event_t *gigaset_add_event(struct cardstate *cs,
+ struct at_state_t *at_state, int type,
+ void *ptr, int parameter, void *arg);
+
+/* Called on CONFIG1 command from frontend. */
+int gigaset_enterconfigmode(struct cardstate *cs);
+
+/* cs->lock must not be locked */
+static inline void gigaset_schedule_event(struct cardstate *cs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&cs->lock, flags);
+ if (cs->running)
+ tasklet_schedule(&cs->event_tasklet);
+ spin_unlock_irqrestore(&cs->lock, flags);
+}
+
+/* Tell common.c that B channel has been closed. */
+/* cs->lock must not be locked */
+static inline void gigaset_bchannel_down(struct bc_state *bcs)
+{
+ gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);
+ gigaset_schedule_event(bcs->cs);
+}
+
+/* Tell common.c that B channel has been opened. */
+/* cs->lock must not be locked */
+static inline void gigaset_bchannel_up(struct bc_state *bcs)
+{
+ gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);
+ gigaset_schedule_event(bcs->cs);
+}
+
+/* set up next receive skb for data mode */
+static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
+{
+ struct cardstate *cs = bcs->cs;
+ unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+ if (bcs->ignore) {
+ bcs->rx_skb = NULL;
+ } else {
+ bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
+ if (bcs->rx_skb == NULL)
+ dev_warn(cs->dev, "could not allocate skb\n");
+ else
+ skb_reserve(bcs->rx_skb, hw_hdr_len);
+ }
+ return bcs->rx_skb;
+}
+
+/* append received bytes to inbuf */
+int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
+ unsigned numbytes);
+
+/* ===========================================================================
+ * Functions implemented in interface.c
+ */
+
+/* initialize interface */
+void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
+ const char *devname);
+/* release interface */
+void gigaset_if_freedriver(struct gigaset_driver *drv);
+/* add minor */
+void gigaset_if_init(struct cardstate *cs);
+/* remove minor */
+void gigaset_if_free(struct cardstate *cs);
+/* device received data */
+void gigaset_if_receive(struct cardstate *cs,
+ unsigned char *buffer, size_t len);
+
+#endif