[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/media/dvb-frontends/m88ds3103.h b/src/kernel/linux/v4.14/drivers/media/dvb-frontends/m88ds3103.h
new file mode 100644
index 0000000..04b355a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/media/dvb-frontends/m88ds3103.h
@@ -0,0 +1,192 @@
+/*
+ * Montage Technology M88DS3103/M88RS6000 demodulator driver
+ *
+ * Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef M88DS3103_H
+#define M88DS3103_H
+
+#include <linux/dvb/frontend.h>
+
+/*
+ * I2C address
+ * 0x68,
+ */
+
+/**
+ * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
+ * @clk: Clock frequency.
+ * @i2c_wr_max: Max bytes I2C adapter can write at once.
+ * @ts_mode: TS mode.
+ * @ts_clk: TS clock (KHz).
+ * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising
+ * edge.
+ * @spec_inv: Input spectrum inversion.
+ * @agc: AGC configuration.
+ * @agc_inv: AGC polarity.
+ * @clk_out: Clock output.
+ * @envelope_mode: DiSEqC envelope mode.
+ * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to
+ * set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
+ * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to
+ * enable. 1: pin high to enable, pin low to disable.
+ * @get_dvb_frontend: Get DVB frontend.
+ * @get_i2c_adapter: Get I2C adapter.
+ */
+
+struct m88ds3103_platform_data {
+ u32 clk;
+ u16 i2c_wr_max;
+#define M88DS3103_TS_SERIAL 0 /* TS output pin D0, normal */
+#define M88DS3103_TS_SERIAL_D7 1 /* TS output pin D7 */
+#define M88DS3103_TS_PARALLEL 2 /* TS Parallel mode */
+#define M88DS3103_TS_CI 3 /* TS CI Mode */
+ u8 ts_mode:2;
+ u32 ts_clk;
+ u8 ts_clk_pol:1;
+ u8 spec_inv:1;
+ u8 agc;
+ u8 agc_inv:1;
+#define M88DS3103_CLOCK_OUT_DISABLED 0
+#define M88DS3103_CLOCK_OUT_ENABLED 1
+#define M88DS3103_CLOCK_OUT_ENABLED_DIV2 2
+ u8 clk_out:2;
+ u8 envelope_mode:1;
+ u8 lnb_hv_pol:1;
+ u8 lnb_en_pol:1;
+
+ struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
+ struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
+
+/* private: For legacy media attach wrapper. Do not set value. */
+ u8 attach_in_use:1;
+};
+
+/*
+ * Do not add new m88ds3103_attach() users! Use I2C bindings instead.
+ */
+struct m88ds3103_config {
+ /*
+ * I2C address
+ * Default: none, must set
+ * 0x68, ...
+ */
+ u8 i2c_addr;
+
+ /*
+ * clock
+ * Default: none, must set
+ * 27000000
+ */
+ u32 clock;
+
+ /*
+ * max bytes I2C provider is asked to write at once
+ * Default: none, must set
+ * 33, 65, ...
+ */
+ u16 i2c_wr_max;
+
+ /*
+ * TS output mode
+ * Default: M88DS3103_TS_SERIAL
+ */
+#define M88DS3103_TS_SERIAL 0 /* TS output pin D0, normal */
+#define M88DS3103_TS_SERIAL_D7 1 /* TS output pin D7 */
+#define M88DS3103_TS_PARALLEL 2 /* TS Parallel mode */
+#define M88DS3103_TS_CI 3 /* TS CI Mode */
+ u8 ts_mode;
+
+ /*
+ * TS clk in KHz
+ * Default: 0.
+ */
+ u32 ts_clk;
+
+ /*
+ * TS clk polarity.
+ * Default: 0. 1-active at falling edge; 0-active at rising edge.
+ */
+ u8 ts_clk_pol:1;
+
+ /*
+ * spectrum inversion
+ * Default: 0
+ */
+ u8 spec_inv:1;
+
+ /*
+ * AGC polarity
+ * Default: 0
+ */
+ u8 agc_inv:1;
+
+ /*
+ * clock output
+ * Default: M88DS3103_CLOCK_OUT_DISABLED
+ */
+#define M88DS3103_CLOCK_OUT_DISABLED 0
+#define M88DS3103_CLOCK_OUT_ENABLED 1
+#define M88DS3103_CLOCK_OUT_ENABLED_DIV2 2
+ u8 clock_out;
+
+ /*
+ * DiSEqC envelope mode
+ * Default: 0
+ */
+ u8 envelope_mode:1;
+
+ /*
+ * AGC configuration
+ * Default: none, must set
+ */
+ u8 agc;
+
+ /*
+ * LNB H/V pin polarity
+ * Default: 0.
+ * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
+ * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
+ */
+ u8 lnb_hv_pol:1;
+
+ /*
+ * LNB enable pin polarity
+ * Default: 0.
+ * 1: pin high to enable, pin low to disable.
+ * 0: pin high to disable, pin low to enable.
+ */
+ u8 lnb_en_pol:1;
+};
+
+#if defined(CONFIG_DVB_M88DS3103) || \
+ (defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
+extern struct dvb_frontend *m88ds3103_attach(
+ const struct m88ds3103_config *config,
+ struct i2c_adapter *i2c,
+ struct i2c_adapter **tuner_i2c);
+extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm);
+#else
+static inline struct dvb_frontend *m88ds3103_attach(
+ const struct m88ds3103_config *config,
+ struct i2c_adapter *i2c,
+ struct i2c_adapter **tuner_i2c)
+{
+ pr_warn("%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#define m88ds3103_get_agc_pwm NULL
+#endif
+
+#endif