[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/media/radio/radio-gemtek.c b/src/kernel/linux/v4.14/drivers/media/radio/radio-gemtek.c
new file mode 100644
index 0000000..ddc12b1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/media/radio/radio-gemtek.c
@@ -0,0 +1,339 @@
+/*
+ * GemTek radio card driver
+ *
+ * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
+ *
+ * GemTek hasn't released any specs on the card, so the protocol had to
+ * be reverse engineered with dosemu.
+ *
+ * Besides the protocol changes, this is mostly a copy of:
+ *
+ * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
+ *
+ * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
+ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Note: this card seems to swap the left and right audio channels!
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h> /* Modules */
+#include <linux/init.h> /* Initdata */
+#include <linux/ioport.h> /* request_region */
+#include <linux/delay.h> /* udelay */
+#include <linux/videodev2.h> /* kernel radio structs */
+#include <linux/mutex.h>
+#include <linux/io.h> /* outb, outb_p */
+#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include "radio-isa.h"
+
+/*
+ * Module info.
+ */
+
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+/*
+ * Module params.
+ */
+
+#ifndef CONFIG_RADIO_GEMTEK_PORT
+#define CONFIG_RADIO_GEMTEK_PORT -1
+#endif
+#ifndef CONFIG_RADIO_GEMTEK_PROBE
+#define CONFIG_RADIO_GEMTEK_PROBE 1
+#endif
+
+#define GEMTEK_MAX 4
+
+static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
+static bool hardmute;
+static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
+ [1 ... (GEMTEK_MAX - 1)] = -1 };
+static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 };
+
+module_param(probe, bool, 0444);
+MODULE_PARM_DESC(probe, "Enable automatic device probing.");
+
+module_param(hardmute, bool, 0644);
+MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise.");
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard).");
+
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+/*
+ * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal
+ * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
+ */
+#define FSCALE 8
+#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
+#define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
+
+#define GEMTEK_CK 0x01 /* Clock signal */
+#define GEMTEK_DA 0x02 /* Serial data */
+#define GEMTEK_CE 0x04 /* Chip enable */
+#define GEMTEK_NS 0x08 /* No signal */
+#define GEMTEK_MT 0x10 /* Line mute */
+#define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */
+#define GEMTEK_PLL_OFF 0x07 /* PLL off */
+
+#define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */
+
+#define SHORT_DELAY 5 /* usec */
+#define LONG_DELAY 75 /* usec */
+
+struct gemtek {
+ struct radio_isa_card isa;
+ bool muted;
+ u32 bu2614data;
+};
+
+#define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */
+#define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */
+#define BU2614_VOID_BITS 4 /* unused */
+#define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */
+#define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */
+#define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */
+#define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/
+#define BU2614_VOID2_BITS 1 /* unused */
+#define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */
+#define BU2614_TEST_BITS 1 /* TS, Test data is input */
+
+#define BU2614_FREQ_SHIFT 0
+#define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
+#define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
+#define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
+#define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
+#define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
+#define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
+#define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
+#define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
+#define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
+
+#define MKMASK(field) (((1<<BU2614_##field##_BITS) - 1) << \
+ BU2614_##field##_SHIFT)
+#define BU2614_PORT_MASK MKMASK(PORT)
+#define BU2614_FREQ_MASK MKMASK(FREQ)
+#define BU2614_VOID_MASK MKMASK(VOID)
+#define BU2614_FMES_MASK MKMASK(FMES)
+#define BU2614_STDF_MASK MKMASK(STDF)
+#define BU2614_SWIN_MASK MKMASK(SWIN)
+#define BU2614_SWAL_MASK MKMASK(SWAL)
+#define BU2614_VOID2_MASK MKMASK(VOID2)
+#define BU2614_FMUN_MASK MKMASK(FMUN)
+#define BU2614_TEST_MASK MKMASK(TEST)
+
+/*
+ * Set data which will be sent to BU2614FS.
+ */
+#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
+ ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
+
+/*
+ * Transmit settings to BU2614FS over GemTek IC.
+ */
+static void gemtek_bu2614_transmit(struct gemtek *gt)
+{
+ struct radio_isa_card *isa = >->isa;
+ int i, bit, q, mute;
+
+ mute = gt->muted ? GEMTEK_MT : 0x00;
+
+ outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
+ udelay(LONG_DELAY);
+
+ for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
+ bit = (q & 1) ? GEMTEK_DA : 0;
+ outb_p(mute | GEMTEK_CE | bit, isa->io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
+ udelay(SHORT_DELAY);
+ }
+
+ outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
+ udelay(SHORT_DELAY);
+}
+
+/*
+ * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
+ */
+static unsigned long gemtek_convfreq(unsigned long freq)
+{
+ return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
+}
+
+static struct radio_isa_card *gemtek_alloc(void)
+{
+ struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL);
+
+ if (gt)
+ gt->muted = true;
+ return gt ? >->isa : NULL;
+}
+
+/*
+ * Set FM-frequency.
+ */
+static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+ struct gemtek *gt = container_of(isa, struct gemtek, isa);
+
+ if (hardmute && gt->muted)
+ return 0;
+
+ gemtek_bu2614_set(gt, BU2614_PORT, 0);
+ gemtek_bu2614_set(gt, BU2614_FMES, 0);
+ gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(gt, BU2614_SWAL, 0);
+ gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */
+ gemtek_bu2614_set(gt, BU2614_TEST, 0);
+ gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
+ gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
+ gemtek_bu2614_transmit(gt);
+ return 0;
+}
+
+/*
+ * Set mute flag.
+ */
+static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+ struct gemtek *gt = container_of(isa, struct gemtek, isa);
+ int i;
+
+ gt->muted = mute;
+ if (hardmute) {
+ if (!mute)
+ return gemtek_s_frequency(isa, isa->freq);
+
+ /* Turn off PLL, disable data output */
+ gemtek_bu2614_set(gt, BU2614_PORT, 0);
+ gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */
+ gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(gt, BU2614_SWAL, 0);
+ gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */
+ gemtek_bu2614_set(gt, BU2614_TEST, 0);
+ gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
+ gemtek_bu2614_set(gt, BU2614_FREQ, 0);
+ gemtek_bu2614_transmit(gt);
+ return 0;
+ }
+
+ /* Read bus contents (CE, CK and DA). */
+ i = inb_p(isa->io);
+ /* Write it back with mute flag set. */
+ outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
+ udelay(SHORT_DELAY);
+ return 0;
+}
+
+static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
+{
+ if (inb_p(isa->io) & GEMTEK_NS)
+ return V4L2_TUNER_SUB_MONO;
+ return V4L2_TUNER_SUB_STEREO;
+}
+
+/*
+ * Check if requested card acts like GemTek Radio card.
+ */
+static bool gemtek_probe(struct radio_isa_card *isa, int io)
+{
+ int i, q;
+
+ q = inb_p(io); /* Read bus contents before probing. */
+ /* Try to turn on CE, CK and DA respectively and check if card responds
+ properly. */
+ for (i = 0; i < 3; ++i) {
+ outb_p(1 << i, io);
+ udelay(SHORT_DELAY);
+
+ if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
+ return false;
+ }
+ outb_p(q >> 5, io); /* Write bus contents back. */
+ udelay(SHORT_DELAY);
+ return true;
+}
+
+static const struct radio_isa_ops gemtek_ops = {
+ .alloc = gemtek_alloc,
+ .probe = gemtek_probe,
+ .s_mute_volume = gemtek_s_mute_volume,
+ .s_frequency = gemtek_s_frequency,
+ .g_rxsubchans = gemtek_g_rxsubchans,
+};
+
+static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
+
+#ifdef CONFIG_PNP
+static const struct pnp_device_id gemtek_pnp_devices[] = {
+ /* AOpen FX-3D/Pro Radio */
+ {.id = "ADS7183", .driver_data = 0},
+ {.id = ""}
+};
+
+MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
+#endif
+
+static struct radio_isa_driver gemtek_driver = {
+ .driver = {
+ .match = radio_isa_match,
+ .probe = radio_isa_probe,
+ .remove = radio_isa_remove,
+ .driver = {
+ .name = "radio-gemtek",
+ },
+ },
+#ifdef CONFIG_PNP
+ .pnp_driver = {
+ .name = "radio-gemtek",
+ .id_table = gemtek_pnp_devices,
+ .probe = radio_isa_pnp_probe,
+ .remove = radio_isa_pnp_remove,
+ },
+#endif
+ .io_params = io,
+ .radio_nr_params = radio_nr,
+ .io_ports = gemtek_ioports,
+ .num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
+ .region_size = 1,
+ .card = "GemTek Radio",
+ .ops = &gemtek_ops,
+ .has_stereo = true,
+};
+
+static int __init gemtek_init(void)
+{
+ gemtek_driver.probe = probe;
+#ifdef CONFIG_PNP
+ pnp_register_driver(&gemtek_driver.pnp_driver);
+#endif
+ return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
+}
+
+static void __exit gemtek_exit(void)
+{
+ hardmute = true; /* Turn off PLL */
+#ifdef CONFIG_PNP
+ pnp_unregister_driver(&gemtek_driver.pnp_driver);
+#endif
+ isa_unregister_driver(&gemtek_driver.driver);
+}
+
+module_init(gemtek_init);
+module_exit(gemtek_exit);