[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/media/radio/radio-zoltrix.c b/src/kernel/linux/v4.14/drivers/media/radio/radio-zoltrix.c
new file mode 100644
index 0000000..026e88e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/media/radio/radio-zoltrix.c
@@ -0,0 +1,248 @@
+/*
+ * Zoltrix Radio Plus driver
+ * Copyright 1998 C. van Schaik <carl@leg.uct.ac.za>
+ *
+ * BUGS
+ * Due to the inconsistency in reading from the signal flags
+ * it is difficult to get an accurate tuned signal.
+ *
+ * It seems that the card is not linear to 0 volume. It cuts off
+ * at a low volume, and it is not possible (at least I have not found)
+ * to get fine volume control over the low volume range.
+ *
+ * Some code derived from code by Romolo Manfredini
+ * romolo@bicnet.it
+ *
+ * 1999-05-06 - (C. van Schaik)
+ * - Make signal strength and stereo scans
+ * kinder to cpu while in delay
+ * 1999-01-05 - (C. van Schaik)
+ * - Changed tuning to 1/160Mhz accuracy
+ * - Added stereo support
+ * (card defaults to stereo)
+ * (can explicitly force mono on the card)
+ * (can detect if station is in stereo)
+ * - Added unmute function
+ * - Reworked ioctl functions
+ * 2002-07-15 - Fix Stereo typo
+ *
+ * 2006-07-24 - Converted to V4L2 API
+ * by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
+ *
+ * Note that this is the driver for the Zoltrix Radio Plus.
+ * This driver does not work for the Zoltrix Radio Plus 108 or the
+ * Zoltrix Radio Plus for Windows.
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h> /* Modules */
+#include <linux/init.h> /* Initdata */
+#include <linux/ioport.h> /* request_region */
+#include <linux/delay.h> /* udelay, msleep */
+#include <linux/videodev2.h> /* kernel radio structs */
+#include <linux/mutex.h>
+#include <linux/io.h> /* outb, outb_p */
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("C. van Schaik");
+MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+#ifndef CONFIG_RADIO_ZOLTRIX_PORT
+#define CONFIG_RADIO_ZOLTRIX_PORT -1
+#endif
+
+#define ZOLTRIX_MAX 2
+
+static int io[ZOLTRIX_MAX] = { [0] = CONFIG_RADIO_ZOLTRIX_PORT,
+ [1 ... (ZOLTRIX_MAX - 1)] = -1 };
+static int radio_nr[ZOLTRIX_MAX] = { [0 ... (ZOLTRIX_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Zoltrix Radio Plus card (0x20c or 0x30c)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct zoltrix {
+ struct radio_isa_card isa;
+ int curvol;
+ bool muted;
+};
+
+static struct radio_isa_card *zoltrix_alloc(void)
+{
+ struct zoltrix *zol = kzalloc(sizeof(*zol), GFP_KERNEL);
+
+ return zol ? &zol->isa : NULL;
+}
+
+static int zoltrix_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+ struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+
+ zol->curvol = vol;
+ zol->muted = mute;
+ if (mute || vol == 0) {
+ outb(0, isa->io);
+ outb(0, isa->io);
+ inb(isa->io + 3); /* Zoltrix needs to be read to confirm */
+ return 0;
+ }
+
+ outb(vol - 1, isa->io);
+ msleep(10);
+ inb(isa->io + 2);
+ return 0;
+}
+
+/* tunes the radio to the desired frequency */
+static int zoltrix_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+ struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+ struct v4l2_device *v4l2_dev = &isa->v4l2_dev;
+ unsigned long long bitmask, f, m;
+ bool stereo = isa->stereo;
+ int i;
+
+ if (freq == 0) {
+ v4l2_warn(v4l2_dev, "cannot set a frequency of 0.\n");
+ return -EINVAL;
+ }
+
+ m = (freq / 160 - 8800) * 2;
+ f = (unsigned long long)m + 0x4d1c;
+
+ bitmask = 0xc480402c10080000ull;
+ i = 45;
+
+ outb(0, isa->io);
+ outb(0, isa->io);
+ inb(isa->io + 3); /* Zoltrix needs to be read to confirm */
+
+ outb(0x40, isa->io);
+ outb(0xc0, isa->io);
+
+ bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ (stereo << 31));
+ while (i--) {
+ if ((bitmask & 0x8000000000000000ull) != 0) {
+ outb(0x80, isa->io);
+ udelay(50);
+ outb(0x00, isa->io);
+ udelay(50);
+ outb(0x80, isa->io);
+ udelay(50);
+ } else {
+ outb(0xc0, isa->io);
+ udelay(50);
+ outb(0x40, isa->io);
+ udelay(50);
+ outb(0xc0, isa->io);
+ udelay(50);
+ }
+ bitmask *= 2;
+ }
+ /* termination sequence */
+ outb(0x80, isa->io);
+ outb(0xc0, isa->io);
+ outb(0x40, isa->io);
+ udelay(1000);
+ inb(isa->io + 2);
+ udelay(1000);
+
+ return zoltrix_s_mute_volume(isa, zol->muted, zol->curvol);
+}
+
+/* Get signal strength */
+static u32 zoltrix_g_rxsubchans(struct radio_isa_card *isa)
+{
+ struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+ int a, b;
+
+ outb(0x00, isa->io); /* This stuff I found to do nothing */
+ outb(zol->curvol, isa->io);
+ msleep(20);
+
+ a = inb(isa->io);
+ msleep(10);
+ b = inb(isa->io);
+
+ return (a == b && a == 0xcf) ?
+ V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+}
+
+static u32 zoltrix_g_signal(struct radio_isa_card *isa)
+{
+ struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+ int a, b;
+
+ outb(0x00, isa->io); /* This stuff I found to do nothing */
+ outb(zol->curvol, isa->io);
+ msleep(20);
+
+ a = inb(isa->io);
+ msleep(10);
+ b = inb(isa->io);
+
+ if (a != b)
+ return 0;
+
+ /* I found this out by playing with a binary scanner on the card io */
+ return (a == 0xcf || a == 0xdf || a == 0xef) ? 0xffff : 0;
+}
+
+static int zoltrix_s_stereo(struct radio_isa_card *isa, bool stereo)
+{
+ return zoltrix_s_frequency(isa, isa->freq);
+}
+
+static const struct radio_isa_ops zoltrix_ops = {
+ .alloc = zoltrix_alloc,
+ .s_mute_volume = zoltrix_s_mute_volume,
+ .s_frequency = zoltrix_s_frequency,
+ .s_stereo = zoltrix_s_stereo,
+ .g_rxsubchans = zoltrix_g_rxsubchans,
+ .g_signal = zoltrix_g_signal,
+};
+
+static const int zoltrix_ioports[] = { 0x20c, 0x30c };
+
+static struct radio_isa_driver zoltrix_driver = {
+ .driver = {
+ .match = radio_isa_match,
+ .probe = radio_isa_probe,
+ .remove = radio_isa_remove,
+ .driver = {
+ .name = "radio-zoltrix",
+ },
+ },
+ .io_params = io,
+ .radio_nr_params = radio_nr,
+ .io_ports = zoltrix_ioports,
+ .num_of_io_ports = ARRAY_SIZE(zoltrix_ioports),
+ .region_size = 2,
+ .card = "Zoltrix Radio Plus",
+ .ops = &zoltrix_ops,
+ .has_stereo = true,
+ .max_volume = 15,
+};
+
+static int __init zoltrix_init(void)
+{
+ return isa_register_driver(&zoltrix_driver.driver, ZOLTRIX_MAX);
+}
+
+static void __exit zoltrix_exit(void)
+{
+ isa_unregister_driver(&zoltrix_driver.driver);
+}
+
+module_init(zoltrix_init);
+module_exit(zoltrix_exit);
+