[Feature]add MT2731_MP2_MR2_SVN388 baseline version

Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/mfd/omap-usb-host.c b/src/kernel/linux/v4.14/drivers/mfd/omap-usb-host.c
new file mode 100644
index 0000000..3785c63
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/mfd/omap-usb-host.c
@@ -0,0 +1,906 @@
+/**
+ * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
+ *
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include "omap-usb.h"
+
+#define USBHS_DRIVER_NAME	"usbhs_omap"
+#define OMAP_EHCI_DEVICE	"ehci-omap"
+#define OMAP_OHCI_DEVICE	"ohci-omap3"
+
+/* OMAP USBHOST Register addresses  */
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
+#define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
+
+#define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
+#define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
+
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
+
+
+struct usbhs_hcd_omap {
+	int				nports;
+	struct clk			**utmi_clk;
+	struct clk			**hsic60m_clk;
+	struct clk			**hsic480m_clk;
+
+	struct clk			*xclk60mhsp1_ck;
+	struct clk			*xclk60mhsp2_ck;
+	struct clk			*utmi_p1_gfclk;
+	struct clk			*utmi_p2_gfclk;
+	struct clk			*init_60m_fclk;
+	struct clk			*ehci_logic_fck;
+
+	void __iomem			*uhh_base;
+
+	struct usbhs_omap_platform_data	*pdata;
+
+	u32				usbhs_rev;
+};
+/*-------------------------------------------------------------------------*/
+
+static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
+static u64 usbhs_dmamask = DMA_BIT_MASK(32);
+
+/*-------------------------------------------------------------------------*/
+
+static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
+{
+	writel_relaxed(val, base + reg);
+}
+
+static inline u32 usbhs_read(void __iomem *base, u32 reg)
+{
+	return readl_relaxed(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
+ * to the device tree binding portN-mode found in
+ * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
+ */
+static const char * const port_modes[] = {
+	[OMAP_USBHS_PORT_MODE_UNUSED]	= "",
+	[OMAP_EHCI_PORT_MODE_PHY]	= "ehci-phy",
+	[OMAP_EHCI_PORT_MODE_TLL]	= "ehci-tll",
+	[OMAP_EHCI_PORT_MODE_HSIC]	= "ehci-hsic",
+	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]	= "ohci-phy-6pin-datse0",
+	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]	= "ohci-phy-6pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]	= "ohci-phy-3pin-datse0",
+	[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]	= "ohci-phy-4pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]	= "ohci-tll-6pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]	= "ohci-tll-6pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]	= "ohci-tll-3pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]	= "ohci-tll-4pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]	= "ohci-tll-2pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]	= "ohci-tll-2pin-dpdm",
+};
+
+/**
+ * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode'
+ * from the port mode string.
+ * @mode: The port mode string, usually obtained from device tree.
+ *
+ * The function returns the 'enum usbhs_omap_port_mode' that matches the
+ * provided port mode string as per the port_modes table.
+ * If no match is found it returns -ENODEV
+ */
+static int omap_usbhs_get_dt_port_mode(const char *mode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port_modes); i++) {
+		if (!strcmp(mode, port_modes[i]))
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+static struct platform_device *omap_usbhs_alloc_child(const char *name,
+			struct resource	*res, int num_resources, void *pdata,
+			size_t pdata_size, struct device *dev)
+{
+	struct platform_device	*child;
+	int			ret;
+
+	child = platform_device_alloc(name, 0);
+
+	if (!child) {
+		dev_err(dev, "platform_device_alloc %s failed\n", name);
+		goto err_end;
+	}
+
+	ret = platform_device_add_resources(child, res, num_resources);
+	if (ret) {
+		dev_err(dev, "platform_device_add_resources failed\n");
+		goto err_alloc;
+	}
+
+	ret = platform_device_add_data(child, pdata, pdata_size);
+	if (ret) {
+		dev_err(dev, "platform_device_add_data failed\n");
+		goto err_alloc;
+	}
+
+	child->dev.dma_mask		= &usbhs_dmamask;
+	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
+	child->dev.parent		= dev;
+
+	ret = platform_device_add(child);
+	if (ret) {
+		dev_err(dev, "platform_device_add failed\n");
+		goto err_alloc;
+	}
+
+	return child;
+
+err_alloc:
+	platform_device_put(child);
+
+err_end:
+	return NULL;
+}
+
+static int omap_usbhs_alloc_children(struct platform_device *pdev)
+{
+	struct device				*dev = &pdev->dev;
+	struct usbhs_omap_platform_data		*pdata = dev_get_platdata(dev);
+	struct platform_device			*ehci;
+	struct platform_device			*ohci;
+	struct resource				*res;
+	struct resource				resources[2];
+	int					ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
+	if (!res) {
+		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
+	if (!res) {
+		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[1] = *res;
+
+	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
+		sizeof(*pdata), dev);
+
+	if (!ehci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		ret = -ENOMEM;
+		goto err_end;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[1] = *res;
+
+	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
+		sizeof(*pdata), dev);
+	if (!ohci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		ret = -ENOMEM;
+		goto err_ehci;
+	}
+
+	return 0;
+
+err_ehci:
+	platform_device_unregister(ehci);
+
+err_end:
+	return ret;
+}
+
+static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
+{
+	switch (pmode) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int usbhs_runtime_resume(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i, r;
+
+	dev_dbg(dev, "usbhs_runtime_resume\n");
+
+	omap_tll_enable(pdata);
+
+	if (!IS_ERR(omap->ehci_logic_fck))
+		clk_prepare_enable(omap->ehci_logic_fck);
+
+	for (i = 0; i < omap->nports; i++) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_EHCI_PORT_MODE_HSIC:
+			if (!IS_ERR(omap->hsic60m_clk[i])) {
+				r = clk_prepare_enable(omap->hsic60m_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d hsic60m clk:%d\n",
+					 i, r);
+				}
+			}
+
+			if (!IS_ERR(omap->hsic480m_clk[i])) {
+				r = clk_prepare_enable(omap->hsic480m_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d hsic480m clk:%d\n",
+					 i, r);
+				}
+			}
+		/* Fall through as HSIC mode needs utmi_clk */
+
+		case OMAP_EHCI_PORT_MODE_TLL:
+			if (!IS_ERR(omap->utmi_clk[i])) {
+				r = clk_prepare_enable(omap->utmi_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d clk : %d\n",
+					 i, r);
+				}
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int usbhs_runtime_suspend(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i;
+
+	dev_dbg(dev, "usbhs_runtime_suspend\n");
+
+	for (i = 0; i < omap->nports; i++) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_EHCI_PORT_MODE_HSIC:
+			if (!IS_ERR(omap->hsic60m_clk[i]))
+				clk_disable_unprepare(omap->hsic60m_clk[i]);
+
+			if (!IS_ERR(omap->hsic480m_clk[i]))
+				clk_disable_unprepare(omap->hsic480m_clk[i]);
+		/* Fall through as utmi_clks were used in HSIC mode */
+
+		case OMAP_EHCI_PORT_MODE_TLL:
+			if (!IS_ERR(omap->utmi_clk[i]))
+				clk_disable_unprepare(omap->utmi_clk[i]);
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!IS_ERR(omap->ehci_logic_fck))
+		clk_disable_unprepare(omap->ehci_logic_fck);
+
+	omap_tll_disable(pdata);
+
+	return 0;
+}
+
+static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
+						unsigned reg)
+{
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i;
+
+	for (i = 0; i < omap->nports; i++) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_USBHS_PORT_MODE_UNUSED:
+			reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
+			break;
+		case OMAP_EHCI_PORT_MODE_PHY:
+			if (pdata->single_ulpi_bypass)
+				break;
+
+			if (i == 0)
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+								<< (i-1));
+			break;
+		default:
+			if (pdata->single_ulpi_bypass)
+				break;
+
+			if (i == 0)
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+								<< (i-1);
+			break;
+		}
+	}
+
+	if (pdata->single_ulpi_bypass) {
+		/* bypass ULPI only if none of the ports use PHY mode */
+		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+
+		for (i = 0; i < omap->nports; i++) {
+			if (is_ehci_phy_mode(pdata->port_mode[i])) {
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+				break;
+			}
+		}
+	}
+
+	return reg;
+}
+
+static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
+						unsigned reg)
+{
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i;
+
+	for (i = 0; i < omap->nports; i++) {
+		/* Clear port mode fields for PHY mode */
+		reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
+
+		if (is_ehci_tll_mode(pdata->port_mode[i]) ||
+				(is_ohci_port(pdata->port_mode[i])))
+			reg |= OMAP4_P1_MODE_TLL << 2 * i;
+		else if (is_ehci_hsic_mode(pdata->port_mode[i]))
+			reg |= OMAP4_P1_MODE_HSIC << 2 * i;
+	}
+
+	return reg;
+}
+
+static void omap_usbhs_init(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	unsigned			reg;
+
+	dev_dbg(dev, "starting TI HSUSB Controller\n");
+
+	pm_runtime_get_sync(dev);
+
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	switch (omap->usbhs_rev) {
+	case OMAP_USBHS_REV1:
+		reg = omap_usbhs_rev1_hostconfig(omap, reg);
+		break;
+
+	case OMAP_USBHS_REV2:
+		reg = omap_usbhs_rev2_hostconfig(omap, reg);
+		break;
+
+	default:	/* newer revisions */
+		reg = omap_usbhs_rev2_hostconfig(omap, reg);
+		break;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+	pm_runtime_put_sync(dev);
+}
+
+static int usbhs_omap_get_dt_pdata(struct device *dev,
+					struct usbhs_omap_platform_data *pdata)
+{
+	int ret, i;
+	struct device_node *node = dev->of_node;
+
+	ret = of_property_read_u32(node, "num-ports", &pdata->nports);
+	if (ret)
+		pdata->nports = 0;
+
+	if (pdata->nports > OMAP3_HS_USB_PORTS) {
+		dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
+				pdata->nports, OMAP3_HS_USB_PORTS);
+		return -ENODEV;
+	}
+
+	/* get port modes */
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+		char prop[11];
+		const char *mode;
+
+		pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
+
+		snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
+		ret = of_property_read_string(node, prop, &mode);
+		if (ret < 0)
+			continue;
+
+		ret = omap_usbhs_get_dt_port_mode(mode);
+		if (ret < 0) {
+			dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
+					i, mode);
+			return -ENODEV;
+		}
+
+		dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
+		pdata->port_mode[i] = ret;
+	}
+
+	/* get flags */
+	pdata->single_ulpi_bypass = of_property_read_bool(node,
+						"single-ulpi-bypass");
+
+	return 0;
+}
+
+static const struct of_device_id usbhs_child_match_table[] = {
+	{ .compatible = "ti,ehci-omap", },
+	{ .compatible = "ti,ohci-omap3", },
+	{ }
+};
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int usbhs_omap_probe(struct platform_device *pdev)
+{
+	struct device			*dev =  &pdev->dev;
+	struct usbhs_omap_platform_data	*pdata = dev_get_platdata(dev);
+	struct usbhs_hcd_omap		*omap;
+	struct resource			*res;
+	int				ret = 0;
+	int				i;
+	bool				need_logic_fck;
+
+	if (dev->of_node) {
+		/* For DT boot we populate platform data from OF node */
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		ret = usbhs_omap_get_dt_pdata(dev, pdata);
+		if (ret)
+			return ret;
+
+		dev->platform_data = pdata;
+	}
+
+	if (!pdata) {
+		dev_err(dev, "Missing platform data\n");
+		return -ENODEV;
+	}
+
+	if (pdata->nports > OMAP3_HS_USB_PORTS) {
+		dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
+				pdata->nports, OMAP3_HS_USB_PORTS);
+		return -ENODEV;
+	}
+
+	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	omap->uhh_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(omap->uhh_base))
+		return PTR_ERR(omap->uhh_base);
+
+	omap->pdata = pdata;
+
+	/* Initialize the TLL subsystem */
+	omap_tll_init(pdata);
+
+	pm_runtime_enable(dev);
+
+	platform_set_drvdata(pdev, omap);
+	pm_runtime_get_sync(dev);
+
+	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+
+	/* we need to call runtime suspend before we update omap->nports
+	 * to prevent unbalanced clk_disable()
+	 */
+	pm_runtime_put_sync(dev);
+
+	/*
+	 * If platform data contains nports then use that
+	 * else make out number of ports from USBHS revision
+	 */
+	if (pdata->nports) {
+		omap->nports = pdata->nports;
+	} else {
+		switch (omap->usbhs_rev) {
+		case OMAP_USBHS_REV1:
+			omap->nports = 3;
+			break;
+		case OMAP_USBHS_REV2:
+			omap->nports = 2;
+			break;
+		default:
+			omap->nports = OMAP3_HS_USB_PORTS;
+			dev_dbg(dev,
+			 "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
+			 omap->usbhs_rev, omap->nports);
+			break;
+		}
+		pdata->nports = omap->nports;
+	}
+
+	i = sizeof(struct clk *) * omap->nports;
+	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+	omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+	omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+
+	if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	/* Set all clocks as invalid to begin with */
+	omap->ehci_logic_fck = ERR_PTR(-ENODEV);
+	omap->init_60m_fclk = ERR_PTR(-ENODEV);
+	omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
+	omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
+	omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
+	omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
+
+	for (i = 0; i < omap->nports; i++) {
+		omap->utmi_clk[i] = ERR_PTR(-ENODEV);
+		omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
+		omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
+	}
+
+	/* for OMAP3 i.e. USBHS REV1 */
+	if (omap->usbhs_rev == OMAP_USBHS_REV1) {
+		need_logic_fck = false;
+		for (i = 0; i < omap->nports; i++) {
+			if (is_ehci_phy_mode(pdata->port_mode[i]) ||
+			    is_ehci_tll_mode(pdata->port_mode[i]) ||
+			    is_ehci_hsic_mode(pdata->port_mode[i]))
+
+				need_logic_fck |= true;
+		}
+
+		if (need_logic_fck) {
+			omap->ehci_logic_fck = devm_clk_get(dev,
+							    "usbhost_120m_fck");
+			if (IS_ERR(omap->ehci_logic_fck)) {
+				ret = PTR_ERR(omap->ehci_logic_fck);
+				dev_err(dev, "usbhost_120m_fck failed:%d\n",
+					ret);
+				goto err_mem;
+			}
+		}
+		goto initialize;
+	}
+
+	/* for OMAP4+ i.e. USBHS REV2+ */
+	omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(omap->utmi_p1_gfclk)) {
+		ret = PTR_ERR(omap->utmi_p1_gfclk);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+		goto err_mem;
+	}
+
+	omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(omap->utmi_p2_gfclk)) {
+		ret = PTR_ERR(omap->utmi_p2_gfclk);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_mem;
+	}
+
+	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
+	if (IS_ERR(omap->xclk60mhsp1_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp1_ck);
+		dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
+		goto err_mem;
+	}
+
+	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
+	if (IS_ERR(omap->xclk60mhsp2_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp2_ck);
+		dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
+		goto err_mem;
+	}
+
+	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
+	if (IS_ERR(omap->init_60m_fclk)) {
+		ret = PTR_ERR(omap->init_60m_fclk);
+		dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
+		goto err_mem;
+	}
+
+	for (i = 0; i < omap->nports; i++) {
+		char clkname[30];
+
+		/* clock names are indexed from 1*/
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_utmi_p%d_clk", i + 1);
+
+		/* If a clock is not found we won't bail out as not all
+		 * platforms have all clocks and we can function without
+		 * them
+		 */
+		omap->utmi_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->utmi_clk[i])) {
+			ret = PTR_ERR(omap->utmi_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
+
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_hsic480m_p%d_clk", i + 1);
+		omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->hsic480m_clk[i])) {
+			ret = PTR_ERR(omap->hsic480m_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
+
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_hsic60m_p%d_clk", i + 1);
+		omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->hsic60m_clk[i])) {
+			ret = PTR_ERR(omap->hsic60m_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
+	}
+
+	if (is_ehci_phy_mode(pdata->port_mode[0])) {
+		ret = clk_set_parent(omap->utmi_p1_gfclk,
+					omap->xclk60mhsp1_ck);
+		if (ret != 0) {
+			dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
+	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+		ret = clk_set_parent(omap->utmi_p1_gfclk,
+					omap->init_60m_fclk);
+		if (ret != 0) {
+			dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
+	}
+
+	if (is_ehci_phy_mode(pdata->port_mode[1])) {
+		ret = clk_set_parent(omap->utmi_p2_gfclk,
+					omap->xclk60mhsp2_ck);
+		if (ret != 0) {
+			dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
+	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+		ret = clk_set_parent(omap->utmi_p2_gfclk,
+						omap->init_60m_fclk);
+		if (ret != 0) {
+			dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
+	}
+
+initialize:
+	omap_usbhs_init(dev);
+
+	if (dev->of_node) {
+		ret = of_platform_populate(dev->of_node,
+				usbhs_child_match_table, NULL, dev);
+
+		if (ret) {
+			dev_err(dev, "Failed to create DT children: %d\n", ret);
+			goto err_mem;
+		}
+
+	} else {
+		ret = omap_usbhs_alloc_children(pdev);
+		if (ret) {
+			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
+						ret);
+			goto err_mem;
+		}
+	}
+
+	return 0;
+
+err_mem:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int usbhs_omap_remove_child(struct device *dev, void *data)
+{
+	dev_info(dev, "unregistering\n");
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int usbhs_omap_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	/* remove children */
+	device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
+	return 0;
+}
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+	.runtime_suspend	= usbhs_runtime_suspend,
+	.runtime_resume		= usbhs_runtime_resume,
+};
+
+static const struct of_device_id usbhs_omap_dt_ids[] = {
+	{ .compatible = "ti,usbhs-host" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
+
+
+static struct platform_driver usbhs_omap_driver = {
+	.driver = {
+		.name		= (char *)usbhs_driver_name,
+		.pm		= &usbhsomap_dev_pm_ops,
+		.of_match_table = usbhs_omap_dt_ids,
+	},
+	.probe		= usbhs_omap_probe,
+	.remove		= usbhs_omap_remove,
+};
+
+MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
+
+static int omap_usbhs_drvinit(void)
+{
+	return platform_driver_register(&usbhs_omap_driver);
+}
+
+/*
+ * init before ehci and ohci drivers;
+ * The usbhs core driver should be initialized much before
+ * the omap ehci and ohci probe functions are called.
+ * This usbhs core driver should be initialized after
+ * usb tll driver
+ */
+fs_initcall_sync(omap_usbhs_drvinit);
+
+static void omap_usbhs_drvexit(void)
+{
+	platform_driver_unregister(&usbhs_omap_driver);
+}
+module_exit(omap_usbhs_drvexit);