[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/mmc/host/sdhci-of-esdhc.c b/src/kernel/linux/v4.14/drivers/mmc/host/sdhci-of-esdhc.c
new file mode 100644
index 0000000..9a1ab39
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/mmc/host/sdhci-of-esdhc.c
@@ -0,0 +1,951 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sys_soc.h>
+#include <linux/clk.h>
+#include <linux/ktime.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define VENDOR_V_22 0x12
+#define VENDOR_V_23 0x13
+
+struct sdhci_esdhc {
+ u8 vendor_ver;
+ u8 spec_ver;
+ bool quirk_incorrect_hostver;
+ unsigned int peripheral_clock;
+};
+
+/**
+ * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
+ * to make it compatible with SD spec.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_readl_fixup(struct sdhci_host *host,
+ int spec_reg, u32 value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ u32 ret;
+
+ /*
+ * The bit of ADMA flag in eSDHC is not compatible with standard
+ * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+ * supported by eSDHC.
+ * And for many FSL eSDHC controller, the reset value of field
+ * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
+ * only these vendor version is greater than 2.2/0x12 support ADMA.
+ */
+ if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
+ if (esdhc->vendor_ver > VENDOR_V_22) {
+ ret = value | SDHCI_CAN_DO_ADMA2;
+ return ret;
+ }
+ }
+ /*
+ * The DAT[3:0] line signal levels and the CMD line signal level are
+ * not compatible with standard SDHC register. The line signal levels
+ * DAT[7:0] are at bits 31:24 and the command line signal level is at
+ * bit 23. All other bits are the same as in the standard SDHC
+ * register.
+ */
+ if (spec_reg == SDHCI_PRESENT_STATE) {
+ ret = value & 0x000fffff;
+ ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
+ ret |= (value << 1) & SDHCI_CMD_LVL;
+ return ret;
+ }
+
+ /*
+ * DTS properties of mmc host are used to enable each speed mode
+ * according to soc and board capability. So clean up
+ * SDR50/SDR104/DDR50 support bits here.
+ */
+ if (spec_reg == SDHCI_CAPABILITIES_1) {
+ ret = value & ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
+ SDHCI_SUPPORT_DDR50);
+ return ret;
+ }
+
+ ret = value;
+ return ret;
+}
+
+static u16 esdhc_readw_fixup(struct sdhci_host *host,
+ int spec_reg, u32 value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ u16 ret;
+ int shift = (spec_reg & 0x2) * 8;
+
+ if (spec_reg == SDHCI_HOST_VERSION)
+ ret = value & 0xffff;
+ else
+ ret = (value >> shift) & 0xffff;
+ /* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
+ * vendor version and spec version information.
+ */
+ if ((spec_reg == SDHCI_HOST_VERSION) &&
+ (esdhc->quirk_incorrect_hostver))
+ ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
+ return ret;
+}
+
+static u8 esdhc_readb_fixup(struct sdhci_host *host,
+ int spec_reg, u32 value)
+{
+ u8 ret;
+ u8 dma_bits;
+ int shift = (spec_reg & 0x3) * 8;
+
+ ret = (value >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (spec_reg == SDHCI_HOST_CONTROL) {
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+ return ret;
+}
+
+/**
+ * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
+ * written into eSDHC register.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 8/16/32bit SD spec register value that would be written
+ * @old_value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_writel_fixup(struct sdhci_host *host,
+ int spec_reg, u32 value, u32 old_value)
+{
+ u32 ret;
+
+ /*
+ * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+ * when SYSCTL[RSTD] is set for some special operations.
+ * No any impact on other operation.
+ */
+ if (spec_reg == SDHCI_INT_ENABLE)
+ ret = value | SDHCI_INT_BLK_GAP;
+ else
+ ret = value;
+
+ return ret;
+}
+
+static u32 esdhc_writew_fixup(struct sdhci_host *host,
+ int spec_reg, u16 value, u32 old_value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ int shift = (spec_reg & 0x2) * 8;
+ u32 ret;
+
+ switch (spec_reg) {
+ case SDHCI_TRANSFER_MODE:
+ /*
+ * Postpone this write, we must do it together with a
+ * command write that is down below. Return old value.
+ */
+ pltfm_host->xfer_mode_shadow = value;
+ return old_value;
+ case SDHCI_COMMAND:
+ ret = (value << 16) | pltfm_host->xfer_mode_shadow;
+ return ret;
+ }
+
+ ret = old_value & (~(0xffff << shift));
+ ret |= (value << shift);
+
+ if (spec_reg == SDHCI_BLOCK_SIZE) {
+ /*
+ * Two last DMA bits are reserved, and first one is used for
+ * non-standard blksz of 4096 bytes that we don't support
+ * yet. So clear the DMA boundary bits.
+ */
+ ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
+ }
+ return ret;
+}
+
+static u32 esdhc_writeb_fixup(struct sdhci_host *host,
+ int spec_reg, u8 value, u32 old_value)
+{
+ u32 ret;
+ u32 dma_bits;
+ u8 tmp;
+ int shift = (spec_reg & 0x3) * 8;
+
+ /*
+ * eSDHC doesn't have a standard power control register, so we do
+ * nothing here to avoid incorrect operation.
+ */
+ if (spec_reg == SDHCI_POWER_CONTROL)
+ return old_value;
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (spec_reg == SDHCI_HOST_CONTROL) {
+ /*
+ * If host control register is not standard, exit
+ * this function
+ */
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
+ return old_value;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
+ ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
+ tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
+ (old_value & SDHCI_CTRL_DMA_MASK);
+ ret = (ret & (~0xff)) | tmp;
+
+ /* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
+ ret &= ~ESDHC_HOST_CONTROL_RES;
+ return ret;
+ }
+
+ ret = (old_value & (~(0xff << shift))) | (value << shift);
+ return ret;
+}
+
+static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
+{
+ u32 ret;
+ u32 value;
+
+ if (reg == SDHCI_CAPABILITIES_1)
+ value = ioread32be(host->ioaddr + ESDHC_CAPABILITIES_1);
+ else
+ value = ioread32be(host->ioaddr + reg);
+
+ ret = esdhc_readl_fixup(host, reg, value);
+
+ return ret;
+}
+
+static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
+{
+ u32 ret;
+ u32 value;
+
+ if (reg == SDHCI_CAPABILITIES_1)
+ value = ioread32(host->ioaddr + ESDHC_CAPABILITIES_1);
+ else
+ value = ioread32(host->ioaddr + reg);
+
+ ret = esdhc_readl_fixup(host, reg, value);
+
+ return ret;
+}
+
+static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
+{
+ u16 ret;
+ u32 value;
+ int base = reg & ~0x3;
+
+ value = ioread32be(host->ioaddr + base);
+ ret = esdhc_readw_fixup(host, reg, value);
+ return ret;
+}
+
+static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
+{
+ u16 ret;
+ u32 value;
+ int base = reg & ~0x3;
+
+ value = ioread32(host->ioaddr + base);
+ ret = esdhc_readw_fixup(host, reg, value);
+ return ret;
+}
+
+static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
+{
+ u8 ret;
+ u32 value;
+ int base = reg & ~0x3;
+
+ value = ioread32be(host->ioaddr + base);
+ ret = esdhc_readb_fixup(host, reg, value);
+ return ret;
+}
+
+static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
+{
+ u8 ret;
+ u32 value;
+ int base = reg & ~0x3;
+
+ value = ioread32(host->ioaddr + base);
+ ret = esdhc_readb_fixup(host, reg, value);
+ return ret;
+}
+
+static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ u32 value;
+
+ value = esdhc_writel_fixup(host, reg, val, 0);
+ iowrite32be(value, host->ioaddr + reg);
+}
+
+static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ u32 value;
+
+ value = esdhc_writel_fixup(host, reg, val, 0);
+ iowrite32(value, host->ioaddr + reg);
+}
+
+static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ int base = reg & ~0x3;
+ u32 value;
+ u32 ret;
+
+ value = ioread32be(host->ioaddr + base);
+ ret = esdhc_writew_fixup(host, reg, val, value);
+ if (reg != SDHCI_TRANSFER_MODE)
+ iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ int base = reg & ~0x3;
+ u32 value;
+ u32 ret;
+
+ value = ioread32(host->ioaddr + base);
+ ret = esdhc_writew_fixup(host, reg, val, value);
+ if (reg != SDHCI_TRANSFER_MODE)
+ iowrite32(ret, host->ioaddr + base);
+}
+
+static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ int base = reg & ~0x3;
+ u32 value;
+ u32 ret;
+
+ value = ioread32be(host->ioaddr + base);
+ ret = esdhc_writeb_fixup(host, reg, val, value);
+ iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ int base = reg & ~0x3;
+ u32 value;
+ u32 ret;
+
+ value = ioread32(host->ioaddr + base);
+ ret = esdhc_writeb_fixup(host, reg, val, value);
+ iowrite32(ret, host->ioaddr + base);
+}
+
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ bool applicable;
+ dma_addr_t dmastart;
+ dma_addr_t dmanow;
+
+ applicable = (intmask & SDHCI_INT_DATA_END) &&
+ (intmask & SDHCI_INT_BLK_GAP) &&
+ (esdhc->vendor_ver == VENDOR_V_23);
+ if (!applicable)
+ return;
+
+ host->data->error = 0;
+ dmastart = sg_dma_address(host->data->sg);
+ dmanow = dmastart + host->data->bytes_xfered;
+ /*
+ * Force update to the next DMA block boundary.
+ */
+ dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ SDHCI_DEFAULT_BOUNDARY_SIZE;
+ host->data->bytes_xfered = dmanow - dmastart;
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
+static int esdhc_of_enable_dma(struct sdhci_host *host)
+{
+ u32 value;
+ struct device *dev = mmc_dev(host->mmc);
+
+ if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
+ of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+
+ value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+
+ if (of_dma_is_coherent(dev->of_node))
+ value |= ESDHC_DMA_SNOOP;
+ else
+ value &= ~ESDHC_DMA_SNOOP;
+
+ sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
+ return 0;
+}
+
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+
+ if (esdhc->peripheral_clock)
+ return esdhc->peripheral_clock;
+ else
+ return pltfm_host->clock;
+}
+
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ unsigned int clock;
+
+ if (esdhc->peripheral_clock)
+ clock = esdhc->peripheral_clock;
+ else
+ clock = pltfm_host->clock;
+ return clock / 256 / 16;
+}
+
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+ u32 val;
+ ktime_t timeout;
+
+ val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+ if (enable)
+ val |= ESDHC_CLOCK_SDCLKEN;
+ else
+ val &= ~ESDHC_CLOCK_SDCLKEN;
+
+ sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ udelay(10);
+ }
+}
+
+static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ int pre_div = 1;
+ int div = 1;
+ ktime_t timeout;
+ u32 temp;
+
+ host->mmc->actual_clock = 0;
+
+ if (clock == 0) {
+ esdhc_clock_enable(host, false);
+ return;
+ }
+
+ /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
+ if (esdhc->vendor_ver < VENDOR_V_23)
+ pre_div = 2;
+
+ /*
+ * Limit SD clock to 167MHz for ls1046a according to its datasheet
+ */
+ if (clock > 167000000 &&
+ of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
+ clock = 167000000;
+
+ /*
+ * Limit SD clock to 125MHz for ls1012a according to its datasheet
+ */
+ if (clock > 125000000 &&
+ of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
+ clock = 125000000;
+
+ /* Workaround to reduce the clock frequency for p1010 esdhc */
+ if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
+ if (clock > 20000000)
+ clock -= 5000000;
+ if (clock > 40000000)
+ clock -= 5000000;
+ }
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
+ ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+ while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+ pre_div *= 2;
+
+ while (host->max_clk / pre_div / div > clock && div < 16)
+ div++;
+
+ dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / pre_div / div);
+ host->mmc->actual_clock = host->max_clk / pre_div / div;
+ pre_div >>= 1;
+ div--;
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+ | (div << ESDHC_DIVIDER_SHIFT)
+ | (pre_div << ESDHC_PREDIV_SHIFT));
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+ udelay(10);
+ }
+
+ temp |= ESDHC_CLOCK_SDCLKEN;
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+ u32 ctrl;
+
+ ctrl = sdhci_readl(host, ESDHC_PROCTL);
+ ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ ctrl |= ESDHC_CTRL_8BITBUS;
+ break;
+
+ case MMC_BUS_WIDTH_4:
+ ctrl |= ESDHC_CTRL_4BITBUS;
+ break;
+
+ default:
+ break;
+ }
+
+ sdhci_writel(host, ctrl, ESDHC_PROCTL);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+ u32 val;
+
+ sdhci_reset(host, mask);
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ if (mask & SDHCI_RESET_ALL) {
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ }
+}
+
+/* The SCFG, Supplemental Configuration Unit, provides SoC specific
+ * configuration and status registers for the device. There is a
+ * SDHC IO VSEL control register on SCFG for some platforms. It's
+ * used to support SDHC IO voltage switching.
+ */
+static const struct of_device_id scfg_device_ids[] = {
+ { .compatible = "fsl,t1040-scfg", },
+ { .compatible = "fsl,ls1012a-scfg", },
+ { .compatible = "fsl,ls1046a-scfg", },
+ {}
+};
+
+/* SDHC IO VSEL control register definition */
+#define SCFG_SDHCIOVSELCR 0x408
+#define SDHCIOVSELCR_TGLEN 0x80000000
+#define SDHCIOVSELCR_VSELVAL 0x60000000
+#define SDHCIOVSELCR_SDHC_VS 0x00000001
+
+static int esdhc_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct device_node *scfg_node;
+ void __iomem *scfg_base = NULL;
+ u32 sdhciovselcr;
+ u32 val;
+
+ /*
+ * Signal Voltage Switching is only applicable for Host Controllers
+ * v3.00 and above.
+ */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ val = sdhci_readl(host, ESDHC_PROCTL);
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ val &= ~ESDHC_VOLT_SEL;
+ sdhci_writel(host, val, ESDHC_PROCTL);
+ return 0;
+ case MMC_SIGNAL_VOLTAGE_180:
+ scfg_node = of_find_matching_node(NULL, scfg_device_ids);
+ if (scfg_node)
+ scfg_base = of_iomap(scfg_node, 0);
+ if (scfg_base) {
+ sdhciovselcr = SDHCIOVSELCR_TGLEN |
+ SDHCIOVSELCR_VSELVAL;
+ iowrite32be(sdhciovselcr,
+ scfg_base + SCFG_SDHCIOVSELCR);
+
+ val |= ESDHC_VOLT_SEL;
+ sdhci_writel(host, val, ESDHC_PROCTL);
+ mdelay(5);
+
+ sdhciovselcr = SDHCIOVSELCR_TGLEN |
+ SDHCIOVSELCR_SDHC_VS;
+ iowrite32be(sdhciovselcr,
+ scfg_base + SCFG_SDHCIOVSELCR);
+ iounmap(scfg_base);
+ } else {
+ val |= ESDHC_VOLT_SEL;
+ sdhci_writel(host, val, ESDHC_PROCTL);
+ }
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 val;
+
+ /* Use tuning block for tuning procedure */
+ esdhc_clock_enable(host, false);
+ val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ val |= ESDHC_FLUSH_ASYNC_FIFO;
+ sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val |= ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ esdhc_clock_enable(host, true);
+
+ return sdhci_execute_tuning(mmc, opcode);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
+
+ return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ int ret = sdhci_resume_host(host);
+
+ if (ret == 0) {
+ /* Isn't this already done by sdhci_resume_host() ? --rmk */
+ esdhc_of_enable_dma(host);
+ sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+ }
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
+ esdhc_of_suspend,
+ esdhc_of_resume);
+
+static const struct sdhci_ops sdhci_esdhc_be_ops = {
+ .read_l = esdhc_be_readl,
+ .read_w = esdhc_be_readw,
+ .read_b = esdhc_be_readb,
+ .write_l = esdhc_be_writel,
+ .write_w = esdhc_be_writew,
+ .write_b = esdhc_be_writeb,
+ .set_clock = esdhc_of_set_clock,
+ .enable_dma = esdhc_of_enable_dma,
+ .get_max_clock = esdhc_of_get_max_clock,
+ .get_min_clock = esdhc_of_get_min_clock,
+ .adma_workaround = esdhc_of_adma_workaround,
+ .set_bus_width = esdhc_pltfm_set_bus_width,
+ .reset = esdhc_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_ops sdhci_esdhc_le_ops = {
+ .read_l = esdhc_le_readl,
+ .read_w = esdhc_le_readw,
+ .read_b = esdhc_le_readb,
+ .write_l = esdhc_le_writel,
+ .write_w = esdhc_le_writew,
+ .write_b = esdhc_le_writeb,
+ .set_clock = esdhc_of_set_clock,
+ .enable_dma = esdhc_of_enable_dma,
+ .get_max_clock = esdhc_of_get_max_clock,
+ .get_min_clock = esdhc_of_get_min_clock,
+ .adma_workaround = esdhc_of_adma_workaround,
+ .set_bus_width = esdhc_pltfm_set_bus_width,
+ .reset = esdhc_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
+ .quirks = ESDHC_DEFAULT_QUIRKS |
+#ifdef CONFIG_PPC
+ SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+#endif
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .ops = &sdhci_esdhc_be_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
+ .quirks = ESDHC_DEFAULT_QUIRKS |
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .ops = &sdhci_esdhc_le_ops,
+};
+
+static struct soc_device_attribute soc_incorrect_hostver[] = {
+ { .family = "QorIQ T4240", .revision = "1.0", },
+ { .family = "QorIQ T4240", .revision = "2.0", },
+ { },
+};
+
+static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_esdhc *esdhc;
+ struct device_node *np;
+ struct clk *clk;
+ u32 val;
+ u16 host_ver;
+
+ pltfm_host = sdhci_priv(host);
+ esdhc = sdhci_pltfm_priv(pltfm_host);
+
+ host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
+ esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
+ SDHCI_VENDOR_VER_SHIFT;
+ esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
+ if (soc_device_match(soc_incorrect_hostver))
+ esdhc->quirk_incorrect_hostver = true;
+ else
+ esdhc->quirk_incorrect_hostver = false;
+
+ np = pdev->dev.of_node;
+ clk = of_clk_get(np, 0);
+ if (!IS_ERR(clk)) {
+ /*
+ * esdhc->peripheral_clock would be assigned with a value
+ * which is eSDHC base clock when use periperal clock.
+ * For ls1046a, the clock value got by common clk API is
+ * peripheral clock while the eSDHC base clock is 1/2
+ * peripheral clock.
+ */
+ if (of_device_is_compatible(np, "fsl,ls1046a-esdhc"))
+ esdhc->peripheral_clock = clk_get_rate(clk) / 2;
+ else
+ esdhc->peripheral_clock = clk_get_rate(clk);
+
+ clk_put(clk);
+ }
+
+ if (esdhc->peripheral_clock) {
+ esdhc_clock_enable(host, false);
+ val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ val |= ESDHC_PERIPHERAL_CLK_SEL;
+ sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+ esdhc_clock_enable(host, true);
+ }
+}
+
+static int sdhci_esdhc_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct device_node *np;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_esdhc *esdhc;
+ int ret;
+
+ np = pdev->dev.of_node;
+
+ if (of_property_read_bool(np, "little-endian"))
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata,
+ sizeof(struct sdhci_esdhc));
+ else
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata,
+ sizeof(struct sdhci_esdhc));
+
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ host->mmc_host_ops.start_signal_voltage_switch =
+ esdhc_signal_voltage_switch;
+ host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
+ host->tuning_delay = 1;
+
+ esdhc_init(pdev, host);
+
+ sdhci_get_of_property(pdev);
+
+ pltfm_host = sdhci_priv(host);
+ esdhc = sdhci_pltfm_priv(pltfm_host);
+ if (esdhc->vendor_ver == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+ if (esdhc->vendor_ver > VENDOR_V_22)
+ host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+
+ if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
+ host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ }
+
+ if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
+ of_device_is_compatible(np, "fsl,p5020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p4080-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1020-esdhc") ||
+ of_device_is_compatible(np, "fsl,t1040-esdhc"))
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
+ /*
+ * Freescale messed up with P2020 as it has a non-standard
+ * host control register
+ */
+ host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+ }
+
+ /* call to generic mmc_of_parse to support additional capabilities */
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err;
+
+ mmc_of_parse_voltage(np, &host->ocr_mask);
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err;
+
+ return 0;
+ err:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+ { .compatible = "fsl,mpc8379-esdhc" },
+ { .compatible = "fsl,mpc8536-esdhc" },
+ { .compatible = "fsl,esdhc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
+static struct platform_driver sdhci_esdhc_driver = {
+ .driver = {
+ .name = "sdhci-esdhc",
+ .of_match_table = sdhci_esdhc_of_match,
+ .pm = &esdhc_of_dev_pm_ops,
+ },
+ .probe = sdhci_esdhc_probe,
+ .remove = sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_esdhc_driver);
+
+MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
+MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
+ "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");