[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/net/phy/Kconfig b/src/kernel/linux/v4.14/drivers/net/phy/Kconfig
new file mode 100644
index 0000000..c0cc0df
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/net/phy/Kconfig
@@ -0,0 +1,415 @@
+#
+# PHY Layer Configuration
+#
+
+menuconfig MDIO_DEVICE
+ tristate "MDIO bus device drivers"
+ help
+ MDIO devices and driver infrastructure code.
+
+config MDIO_BUS
+ tristate
+ default m if PHYLIB=m
+ default MDIO_DEVICE
+ help
+ This internal symbol is used for link time dependencies and it
+ reflects whether the mdio_bus/mdio_device code is built as a
+ loadable module or built-in.
+
+if MDIO_BUS
+
+config MDIO_BCM_IPROC
+ tristate "Broadcom iProc MDIO bus controller"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Broadcom iProc SoC's.
+
+config MDIO_BCM_UNIMAC
+ tristate "Broadcom UniMAC MDIO bus controller"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the Broadcom UniMAC MDIO busses.
+ This hardware can be found in the Broadcom GENET Ethernet MAC
+ controllers as well as some Broadcom Ethernet switches such as the
+ Starfighter 2 switches.
+
+config MDIO_BITBANG
+ tristate "Bitbanged MDIO buses"
+ help
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
+
+ If in doubt, say N.
+
+config MDIO_BUS_MUX
+ tristate
+ depends on OF_MDIO
+ help
+ This module provides a driver framework for MDIO bus
+ multiplexers which connect one of several child MDIO busses
+ to a parent bus. Switching between child busses is done by
+ device specific drivers.
+
+config MDIO_BUS_MUX_BCM_IPROC
+ tristate "Broadcom iProc based MDIO bus multiplexers"
+ depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select MDIO_BUS_MUX
+ default ARCH_BCM_IPROC
+ help
+ This module provides a driver for MDIO bus multiplexers found in
+ iProc based Broadcom SoCs. This multiplexer connects one of several
+ child MDIO bus to a parent bus. Buses could be internal as well as
+ external and selection logic lies inside the same multiplexer.
+
+config MDIO_BUS_MUX_GPIO
+ tristate "GPIO controlled MDIO bus multiplexers"
+ depends on OF_GPIO && OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via GPIO lines. The multiplexer connects one of
+ several child MDIO busses to a parent bus. Child bus
+ selection is under the control of GPIO lines.
+
+config MDIO_BUS_MUX_MMIOREG
+ tristate "MMIO device-controlled MDIO bus multiplexers"
+ depends on OF_MDIO && HAS_IOMEM
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via a simple memory-mapped device, like an FPGA.
+ The multiplexer connects one of several child MDIO busses to a
+ parent bus. Child bus selection is under the control of one of
+ the FPGA's registers.
+
+ Currently, only 8/16/32 bits registers are supported.
+
+config MDIO_CAVIUM
+ tristate
+
+config MDIO_GPIO
+ tristate "GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && GPIOLIB
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
+config MDIO_HISI_FEMAC
+ tristate "Hisilicon FEMAC MDIO bus controller"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Hisilicon SoC that have an Fast Ethernet MAC.
+
+config MDIO_I2C
+ tristate
+ depends on I2C
+ help
+ Support I2C based PHYs. This provides a MDIO bus bridged
+ to I2C to allow PHYs connected in I2C mode to be accessed
+ using the existing infrastructure.
+
+ This is library mode.
+
+config MDIO_MOXART
+ tristate "MOXA ART MDIO interface support"
+ depends on ARCH_MOXART
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the MOXA ART SoC
+
+config MDIO_OCTEON
+ tristate "Octeon and some ThunderX SOCs MDIO buses"
+ depends on 64BIT
+ depends on HAS_IOMEM && OF_MDIO
+ select MDIO_CAVIUM
+ help
+ This module provides a driver for the Octeon and ThunderX MDIO
+ buses. It is required by the Octeon and ThunderX ethernet device
+ drivers on some systems.
+
+config MDIO_SUN4I
+ tristate "Allwinner sun4i MDIO interface support"
+ depends on ARCH_SUNXI
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Allwinner SoC that have an EMAC (A10,
+ A12, A10s, etc.)
+
+config MDIO_THUNDER
+ tristate "ThunderX SOCs MDIO buses"
+ depends on 64BIT
+ depends on PCI
+ select MDIO_CAVIUM
+ help
+ This driver supports the MDIO interfaces found on Cavium
+ ThunderX SoCs when the MDIO bus device appears as a PCI
+ device.
+
+config MDIO_XGENE
+ tristate "APM X-Gene SoC MDIO bus controller"
+ depends on ARCH_XGENE || COMPILE_TEST
+ help
+ This module provides a driver for the MDIO busses found in the
+ APM X-Gene SoC's.
+
+endif
+
+config PHYLINK
+ tristate
+ depends on NETDEVICES
+ select PHYLIB
+ select SWPHY
+ help
+ PHYlink models the link between the PHY and MAC, allowing fixed
+ configuration links, PHYs, and Serdes links with MAC level
+ autonegotiation modes.
+
+menuconfig PHYLIB
+ tristate "PHY Device support and infrastructure"
+ depends on NETDEVICES
+ select MDIO_DEVICE
+ help
+ Ethernet controllers are usually attached to PHY
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
+if PHYLIB
+
+config SWPHY
+ bool
+
+config LED_TRIGGER_PHY
+ bool "Support LED triggers for tracking link state"
+ depends on LEDS_TRIGGERS
+ ---help---
+ Adds support for a set of LED trigger events per-PHY. Link
+ state change will trigger the events, for consumption by an
+ LED class driver. There are triggers for each link speed currently
+ supported by the phy, and are of the form:
+ <mii bus id>:<phy>:<speed>
+
+ Where speed is in the form:
+ <Speed in megabits>Mbps or <Speed in gigabits>Gbps
+
+
+comment "MII PHY device drivers"
+
+config SFP
+ tristate "SFP cage support"
+ depends on I2C && PHYLINK
+ select MDIO_I2C
+
+config AMD_PHY
+ tristate "AMD PHYs"
+ ---help---
+ Currently supports the am79c874
+
+config AQUANTIA_PHY
+ tristate "Aquantia PHYs"
+ ---help---
+ Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+
+config AT803X_PHY
+ tristate "AT803X PHYs"
+ ---help---
+ Currently supports the AT8030 and AT8035 model
+
+config BCM63XX_PHY
+ tristate "Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ select BCM_NET_PHYLIB
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
+config BCM7XXX_PHY
+ tristate "Broadcom 7xxx SOCs internal PHYs"
+ select BCM_NET_PHYLIB
+ ---help---
+ Currently supports the BCM7366, BCM7439, BCM7445, and
+ 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
+config BCM87XX_PHY
+ tristate "Broadcom BCM8706 and BCM8727 PHYs"
+ help
+ Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+
+config BCM_CYGNUS_PHY
+ tristate "Broadcom Cygnus SoC internal PHY"
+ depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+ depends on MDIO_BCM_IPROC
+ select BCM_NET_PHYLIB
+ ---help---
+ This PHY driver is for the 1G internal PHYs of the Broadcom
+ Cygnus Family SoC.
+
+ Currently supports internal PHY's used in the BCM11300,
+ BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+ BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
+config BCM_NET_PHYLIB
+ tristate
+
+config BROADCOM_PHY
+ tristate "Broadcom PHYs"
+ select BCM_NET_PHYLIB
+ ---help---
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+ BCM5481, BCM54810 and BCM5482 PHYs.
+
+config CICADA_PHY
+ tristate "Cicada PHYs"
+ ---help---
+ Currently supports the cis8204
+
+config CORTINA_PHY
+ tristate "Cortina EDC CDR 10G Ethernet PHY"
+ ---help---
+ Currently supports the CS4340 phy.
+
+config DAVICOM_PHY
+ tristate "Davicom PHYs"
+ ---help---
+ Currently supports dm9161e and dm9131
+
+config DP83848_PHY
+ tristate "Texas Instruments DP83848 PHY"
+ ---help---
+ Supports the DP83848 PHY.
+
+config DP83867_PHY
+ tristate "Texas Instruments DP83867 Gigabit PHY"
+ ---help---
+ Currently supports the DP83867 PHY.
+
+config FIXED_PHY
+ tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB
+ select SWPHY
+ ---help---
+ Adds the platform "fixed" MDIO Bus to cover the boards that use
+ PHYs that are not connected to the real MDIO bus.
+
+ Currently tested with mpc866ads and mpc8349e-mitx.
+
+config ICPLUS_PHY
+ tristate "ICPlus PHYs"
+ ---help---
+ Currently supports the IP175C and IP1001 PHYs.
+
+config INTEL_XWAY_PHY
+ tristate "Intel XWAY PHYs"
+ ---help---
+ Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
+ These PHYs are marked as standalone chips under the names
+ PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
+ SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
+
+config LSI_ET1011C_PHY
+ tristate "LSI ET1011C PHY"
+ ---help---
+ Supports the LSI ET1011C PHY.
+
+config LXT_PHY
+ tristate "Intel LXT PHYs"
+ ---help---
+ Currently supports the lxt970, lxt971
+
+config MARVELL_PHY
+ tristate "Marvell PHYs"
+ ---help---
+ Currently has a driver for the 88E1011S
+
+config MARVELL_10G_PHY
+ tristate "Marvell Alaska 10Gbit PHYs"
+ ---help---
+ Support for the Marvell Alaska MV88X3310 and compatible PHYs.
+
+config MARVELL_88Q_PHY
+ tristate "Marvell 88Q PHYs"
+ help
+ Currently supports the 88Q2110 PHYs.
+
+config MESON_GXL_PHY
+ tristate "Amlogic Meson GXL Internal PHY"
+ depends on ARCH_MESON || COMPILE_TEST
+ ---help---
+ Currently has a driver for the Amlogic Meson GXL Internal PHY
+
+config MICREL_PHY
+ tristate "Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config MICROCHIP_PHY
+ tristate "Microchip PHYs"
+ help
+ Supports the LAN88XX PHYs.
+
+config MICROSEMI_PHY
+ tristate "Microsemi PHYs"
+ ---help---
+ Currently supports VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
+
+config NATIONAL_PHY
+ tristate "National Semiconductor PHYs"
+ ---help---
+ Currently supports the DP83865 PHY.
+
+config NXP_TJA1100_PHY
+ tristate "NXP TJA1100 PHY"
+ help
+ Currently supports the TJA1100 PHY.
+
+config QSEMI_PHY
+ tristate "Quality Semiconductor PHYs"
+ ---help---
+ Currently supports the qs6612
+
+config REALTEK_PHY
+ tristate "Realtek PHYs"
+ ---help---
+ Supports the Realtek 821x PHY.
+
+config ROCKCHIP_PHY
+ tristate "Driver for Rockchip Ethernet PHYs"
+ ---help---
+ Currently supports the integrated Ethernet PHY.
+
+config SMSC_PHY
+ tristate "SMSC PHYs"
+ ---help---
+ Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config STE10XP
+ tristate "STMicroelectronics STe10Xp PHYs"
+ ---help---
+ This is the driver for the STe100p and STe101p PHYs.
+
+config TERANETICS_PHY
+ tristate "Teranetics PHYs"
+ ---help---
+ Currently supports the Teranetics TN2020
+
+config VITESSE_PHY
+ tristate "Vitesse PHYs"
+ ---help---
+ Currently supports the vsc8244
+
+config XILINX_GMII2RGMII
+ tristate "Xilinx GMII2RGMII converter driver"
+ ---help---
+ This driver support xilinx GMII to RGMII IP core it provides
+ the Reduced Gigabit Media Independent Interface(RGMII) between
+ Ethernet physical media devices and the Gigabit Ethernet controller.
+
+endif # PHYLIB
+
+config MICREL_KS8995MA
+ tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+ depends on SPI