[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/nvmem/Kconfig b/src/kernel/linux/v4.14/drivers/nvmem/Kconfig
new file mode 100644
index 0000000..101ced4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/nvmem/Kconfig
@@ -0,0 +1,147 @@
+menuconfig NVMEM
+ tristate "NVMEM Support"
+ help
+ Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
+
+ This framework is designed to provide a generic interface to NVMEM
+ from both the Linux Kernel and the userspace.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_core.
+
+ If unsure, say no.
+
+if NVMEM
+
+config NVMEM_IMX_IIM
+ tristate "i.MX IC Identification Module support"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ This is a driver for the IC Identification Module (IIM) available on
+ i.MX SoCs, providing access to 4 Kbits of programmable
+ eFuses.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-imx-iim.
+
+config NVMEM_IMX_OCOTP
+ tristate "i.MX6 On-Chip OTP Controller support"
+ depends on SOC_IMX6 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver for the On-Chip OTP Controller (OCOTP) available on
+ i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
+ eFuses.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-imx-ocotp.
+
+config NVMEM_LPC18XX_EEPROM
+ tristate "NXP LPC18XX EEPROM Memory Support"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y here to include support for NXP LPC18xx EEPROM memory found in
+ NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
+ To compile this driver as a module, choose M here: the module
+ will be called nvmem_lpc18xx_eeprom.
+
+config NVMEM_LPC18XX_OTP
+ tristate "NXP LPC18XX OTP Memory Support"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y here to include support for NXP LPC18xx OTP memory found on
+ all LPC18xx and LPC43xx devices.
+ To compile this driver as a module, choose M here: the module
+ will be called nvmem_lpc18xx_otp.
+
+config NVMEM_MXS_OCOTP
+ tristate "Freescale MXS On-Chip OTP Memory Support"
+ depends on ARCH_MXS || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ If you say Y here, you will get readonly access to the
+ One Time Programmable memory pages that are stored
+ on the Freescale i.MX23/i.MX28 processor.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-mxs-ocotp.
+
+config MTK_EFUSE
+ tristate "Mediatek SoCs EFUSE support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver to access hardware related data like sensor
+ calibration, HDMI impedance etc.
+
+ This driver can also be built as a module. If so, the module
+ will be called efuse-mtk.
+
+config QCOM_QFPROM
+ tristate "QCOM QFPROM Support"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say y here to enable QFPROM support. The QFPROM provides access
+ functions for QFPROM data to rest of the drivers via nvmem interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_qfprom.
+
+config ROCKCHIP_EFUSE
+ tristate "Rockchip eFuse Support"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a simple drive to dump specified values of Rockchip SoC
+ from eFuse, such as cpu-leakage.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_rockchip_efuse.
+
+config NVMEM_BCM_OCOTP
+ tristate "Broadcom On-Chip OTP Controller support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_BCM_IPROC
+ help
+ Say y here to enable read/write access to the Broadcom OTP
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-bcm-ocotp.
+
+config NVMEM_SUNXI_SID
+ tristate "Allwinner SoCs SID support"
+ depends on ARCH_SUNXI
+ help
+ This is a driver for the 'security ID' available on various Allwinner
+ devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_sunxi_sid.
+
+config NVMEM_VF610_OCOTP
+ tristate "VF610 SoC OCOTP support"
+ depends on SOC_VF610 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver for the 'OCOTP' peripheral available on Vybrid
+ devices like VF5xx and VF6xx.
+
+ This driver can also be build as a module. If so, the module will
+ be called nvmem-vf610-ocotp.
+
+config MESON_EFUSE
+ tristate "Amlogic eFuse Support"
+ depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+ help
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_meson_efuse.
+
+endif