[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/nvmem/sunxi_sid.c b/src/kernel/linux/v4.14/drivers/nvmem/sunxi_sid.c
new file mode 100644
index 0000000..0d6648b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/nvmem/sunxi_sid.c
@@ -0,0 +1,222 @@
+/*
+ * Allwinner sunXi SoCs Security ID support.
+ *
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+/* Registers and special values for doing register-based SID readout on H3 */
+#define SUN8I_SID_PRCTL 0x40
+#define SUN8I_SID_RDKEY 0x60
+
+#define SUN8I_SID_OFFSET_MASK 0x1FF
+#define SUN8I_SID_OFFSET_SHIFT 16
+#define SUN8I_SID_OP_LOCK (0xAC << 8)
+#define SUN8I_SID_READ BIT(1)
+
+static struct nvmem_config econfig = {
+ .name = "sunxi-sid",
+ .read_only = true,
+ .stride = 4,
+ .word_size = 1,
+ .owner = THIS_MODULE,
+};
+
+struct sunxi_sid_cfg {
+ u32 value_offset;
+ u32 size;
+ bool need_register_readout;
+};
+
+struct sunxi_sid {
+ void __iomem *base;
+ u32 value_offset;
+};
+
+/* We read the entire key, due to a 32 bit read alignment requirement. Since we
+ * want to return the requested byte, this results in somewhat slower code and
+ * uses 4 times more reads as needed but keeps code simpler. Since the SID is
+ * only very rarely probed, this is not really an issue.
+ */
+static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid,
+ const unsigned int offset)
+{
+ u32 sid_key;
+
+ sid_key = ioread32be(sid->base + round_down(offset, 4));
+ sid_key >>= (offset % 4) * 8;
+
+ return sid_key; /* Only return the last byte */
+}
+
+static int sunxi_sid_read(void *context, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct sunxi_sid *sid = context;
+ u8 *buf = val;
+
+ /* Offset the read operation to the real position of SID */
+ offset += sid->value_offset;
+
+ while (bytes--)
+ *buf++ = sunxi_sid_read_byte(sid, offset++);
+
+ return 0;
+}
+
+static int sun8i_sid_register_readout(const struct sunxi_sid *sid,
+ const unsigned int word)
+{
+ u32 reg_val;
+ int ret;
+
+ /* Set word, lock access, and set read command */
+ reg_val = (word & SUN8I_SID_OFFSET_MASK)
+ << SUN8I_SID_OFFSET_SHIFT;
+ reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ;
+ writel(reg_val, sid->base + SUN8I_SID_PRCTL);
+
+ ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val,
+ !(reg_val & SUN8I_SID_READ), 100, 250000);
+ if (ret)
+ return ret;
+
+ writel(0, sid->base + SUN8I_SID_PRCTL);
+ return 0;
+}
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct nvmem_device *nvmem;
+ struct sunxi_sid *sid;
+ int ret, i, size;
+ char *randomness;
+ const struct sunxi_sid_cfg *cfg;
+
+ sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
+ if (!sid)
+ return -ENOMEM;
+
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
+ return -EINVAL;
+ sid->value_offset = cfg->value_offset;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sid->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(sid->base))
+ return PTR_ERR(sid->base);
+
+ size = cfg->size;
+
+ if (cfg->need_register_readout) {
+ /*
+ * H3's SID controller have a bug that the value at 0x200
+ * offset is not the correct value when the hardware is reseted.
+ * However, after doing a register-based read operation, the
+ * value become right.
+ * Do a full read operation here, but ignore its value
+ * (as it's more fast to read by direct MMIO value than
+ * with registers)
+ */
+ for (i = 0; i < (size >> 2); i++) {
+ ret = sun8i_sid_register_readout(sid, i);
+ if (ret)
+ return ret;
+ }
+ }
+
+ econfig.size = size;
+ econfig.dev = dev;
+ econfig.reg_read = sunxi_sid_read;
+ econfig.priv = sid;
+ nvmem = nvmem_register(&econfig);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ randomness = kzalloc(sizeof(u8) * (size), GFP_KERNEL);
+ if (!randomness) {
+ ret = -EINVAL;
+ goto err_unreg_nvmem;
+ }
+
+ for (i = 0; i < size; i++)
+ randomness[i] = sunxi_sid_read_byte(sid, i);
+
+ add_device_randomness(randomness, size);
+ kfree(randomness);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+
+err_unreg_nvmem:
+ nvmem_unregister(nvmem);
+ return ret;
+}
+
+static int sunxi_sid_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct sunxi_sid_cfg sun4i_a10_cfg = {
+ .size = 0x10,
+};
+
+static const struct sunxi_sid_cfg sun7i_a20_cfg = {
+ .size = 0x200,
+};
+
+static const struct sunxi_sid_cfg sun8i_h3_cfg = {
+ .value_offset = 0x200,
+ .size = 0x100,
+ .need_register_readout = true,
+};
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static struct platform_driver sunxi_sid_driver = {
+ .probe = sunxi_sid_probe,
+ .remove = sunxi_sid_remove,
+ .driver = {
+ .name = "eeprom-sunxi-sid",
+ .of_match_table = sunxi_sid_of_match,
+ },
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");