[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/pci/host/Kconfig b/src/kernel/linux/v4.14/drivers/pci/host/Kconfig
new file mode 100644
index 0000000..ba4b023
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pci/host/Kconfig
@@ -0,0 +1,224 @@
+menu "PCI host controller drivers"
+ depends on PCI
+
+config PCI_MVEBU
+ bool "Marvell EBU PCIe controller"
+ depends on ARCH_MVEBU || ARCH_DOVE
+ depends on ARM
+ depends on OF
+
+config PCI_AARDVARK
+ bool "Aardvark PCIe controller"
+ depends on ARCH_MVEBU && ARM64
+ depends on OF
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Add support for Aardvark 64bit PCIe Host Controller. This
+ controller is part of the South Bridge of the Marvel Armada
+ 3700 SoC.
+
+config PCIE_XILINX_NWL
+ bool "NWL PCIe Core"
+ depends on ARCH_ZYNQMP
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Say 'Y' here if you want kernel support for Xilinx
+ NWL PCIe controller. The controller can act as Root Port
+ or End Point. The current option selection will only
+ support root port enabling.
+
+config PCI_FTPCI100
+ bool "Faraday Technology FTPCI100 PCI controller"
+ depends on OF
+ depends on ARM
+ default ARCH_GEMINI
+
+config PCI_TEGRA
+ bool "NVIDIA Tegra PCIe controller"
+ depends on ARCH_TEGRA
+ help
+ Say Y here if you want support for the PCIe host controller found
+ on NVIDIA Tegra SoCs.
+
+config PCI_RCAR_GEN2
+ bool "Renesas R-Car Gen2 Internal PCI controller"
+ depends on ARM
+ depends on ARCH_RENESAS || COMPILE_TEST
+ help
+ Say Y here if you want internal PCI support on R-Car Gen2 SoC.
+ There are 3 internal PCI controllers available with a single
+ built-in EHCI/OHCI host controller present on each one.
+
+config PCIE_RCAR
+ bool "Renesas R-Car PCIe controller"
+ depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Say Y here if you want PCIe controller support on R-Car SoCs.
+
+config PCI_HOST_COMMON
+ bool
+ select PCI_ECAM
+
+config PCI_HOST_GENERIC
+ bool "Generic PCI host controller"
+ depends on (ARM || ARM64) && OF
+ select PCI_HOST_COMMON
+ select IRQ_DOMAIN
+ help
+ Say Y here if you want to support a simple generic PCI host
+ controller, such as the one emulated by kvmtool.
+
+config PCIE_XILINX
+ bool "Xilinx AXI PCIe host bridge support"
+ depends on ARCH_ZYNQ || MICROBLAZE || (MIPS && PCI_DRIVERS_GENERIC)
+ help
+ Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+ Host Bridge driver.
+
+config PCI_XGENE
+ bool "X-Gene PCIe controller"
+ depends on ARM64
+ depends on OF || (ACPI && PCI_QUIRKS)
+ select PCIEPORTBUS
+ help
+ Say Y here if you want internal PCI support on APM X-Gene SoC.
+ There are 5 internal PCIe ports available. Each port is GEN3 capable
+ and have varied lanes from x1 to x8.
+
+config PCI_XGENE_MSI
+ bool "X-Gene v1 PCIe MSI feature"
+ depends on PCI_XGENE
+ depends on PCI_MSI_IRQ_DOMAIN
+ default y
+ help
+ Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
+ This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
+
+config PCI_VERSATILE
+ bool "ARM Versatile PB PCI controller"
+ depends on ARCH_VERSATILE
+
+config PCIE_IPROC
+ tristate
+ select PCI_DOMAINS
+ help
+ This enables the iProc PCIe core controller support for Broadcom's
+ iProc family of SoCs. An appropriate bus interface driver needs
+ to be enabled to select this.
+
+config PCIE_IPROC_PLATFORM
+ tristate "Broadcom iProc PCIe platform bus driver"
+ depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+ depends on OF
+ select PCIE_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Say Y here if you want to use the Broadcom iProc PCIe controller
+ through the generic platform bus interface
+
+config PCIE_IPROC_BCMA
+ tristate "Broadcom iProc PCIe BCMA bus driver"
+ depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select PCIE_IPROC
+ select BCMA
+ default ARCH_BCM_5301X
+ help
+ Say Y here if you want to use the Broadcom iProc PCIe controller
+ through the BCMA bus interface
+
+config PCIE_IPROC_MSI
+ bool "Broadcom iProc PCIe MSI support"
+ depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
+ depends on PCI_MSI_IRQ_DOMAIN
+ default ARCH_BCM_IPROC
+ help
+ Say Y here if you want to enable MSI support for Broadcom's iProc
+ PCIe controller
+
+config PCIE_ALTERA
+ bool "Altera PCIe controller"
+ depends on ARM || NIOS2
+ depends on OF_PCI
+ select PCI_DOMAINS
+ help
+ Say Y here if you want to enable PCIe controller support on Altera
+ FPGA.
+
+config PCIE_ALTERA_MSI
+ bool "Altera PCIe MSI feature"
+ depends on PCIE_ALTERA
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Say Y here if you want PCIe MSI support for the Altera FPGA.
+ This MSI driver supports Altera MSI to GIC controller IP.
+
+config PCI_HOST_THUNDER_PEM
+ bool "Cavium Thunder PCIe controller to off-chip devices"
+ depends on ARM64
+ depends on OF || (ACPI && PCI_QUIRKS)
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
+
+config PCI_HOST_THUNDER_ECAM
+ bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
+ depends on ARM64
+ depends on OF || (ACPI && PCI_QUIRKS)
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
+
+config PCIE_ROCKCHIP
+ tristate "Rockchip PCIe controller"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on OF
+ depends on PCI_MSI_IRQ_DOMAIN
+ select MFD_SYSCON
+ help
+ Say Y here if you want internal PCI support on Rockchip SoC.
+ There is 1 internal PCIe port available to support GEN2 with
+ 4 slots.
+
+config PCIE_MEDIATEK
+ tristate "MediaTek PCIe controller"
+ depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST)
+ depends on OF
+ depends on PCI
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIEPORTBUS
+ help
+ Say Y here if you want to enable PCIe controller support on
+ MediaTek SoCs.
+
+config PCIE_TANGO_SMP8759
+ bool "Tango SMP8759 PCIe controller (DANGEROUS)"
+ depends on ARCH_TANGO && PCI_MSI && OF
+ depends on BROKEN
+ select PCI_HOST_COMMON
+ help
+ Say Y here to enable PCIe controller support for Sigma Designs
+ Tango SMP8759-based systems.
+
+ Note: The SMP8759 controller multiplexes PCI config and MMIO
+ accesses, and Linux doesn't provide a way to serialize them.
+ This can lead to data corruption if drivers perform concurrent
+ config and MMIO accesses.
+
+config VMD
+ depends on PCI_MSI && X86_64 && SRCU
+ tristate "Intel Volume Management Device Driver"
+ default N
+ ---help---
+ Adds support for the Intel Volume Management Device (VMD). VMD is a
+ secondary PCI host bridge that allows PCI Express root ports,
+ and devices attached to them, to be removed from the default
+ PCI domain and placed within the VMD domain. This provides
+ more bus resources than are otherwise possible with a
+ single domain. If you know your system provides one of these and
+ has devices attached to it, say Y; if you are not sure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmd.
+
+endmenu