[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/phy/allwinner/Kconfig b/src/kernel/linux/v4.14/drivers/phy/allwinner/Kconfig
new file mode 100644
index 0000000..cdc1e74
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/phy/allwinner/Kconfig
@@ -0,0 +1,31 @@
+#
+# Phy drivers for Allwinner platforms
+#
+config PHY_SUN4I_USB
+ tristate "Allwinner sunxi SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on EXTCON
+ depends on POWER_SUPPLY
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+ tristate "Allwinner sun9i SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sun9i SoCs.
+
+ This driver controls each individual USB 2 host PHY.
diff --git a/src/kernel/linux/v4.14/drivers/phy/allwinner/Makefile b/src/kernel/linux/v4.14/drivers/phy/allwinner/Makefile
new file mode 100644
index 0000000..8605529
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/phy/allwinner/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun4i-usb.c b/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun4i-usb.c
new file mode 100644
index 0000000..d6e47de
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -0,0 +1,986 @@
+/*
+ * Allwinner sun4i USB phy driver
+ *
+ * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-sun4i-usb.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+#include <linux/usb/of.h>
+#include <linux/workqueue.h>
+
+#define REG_ISCR 0x00
+#define REG_PHYCTL_A10 0x04
+#define REG_PHYBIST 0x08
+#define REG_PHYTUNE 0x0c
+#define REG_PHYCTL_A33 0x10
+#define REG_PHY_OTGCTL 0x20
+
+#define REG_PMU_UNK1 0x10
+
+#define PHYCTL_DATA BIT(7)
+
+#define OTGCTL_ROUTE_MUSB BIT(0)
+
+#define SUNXI_AHB_ICHR8_EN BIT(10)
+#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
+#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
+#define SUNXI_ULPI_BYPASS_EN BIT(0)
+
+/* ISCR, Interface Status and Control bits */
+#define ISCR_ID_PULLUP_EN (1 << 17)
+#define ISCR_DPDM_PULLUP_EN (1 << 16)
+/* sunxi has the phy id/vbus pins not connected, so we use the force bits */
+#define ISCR_FORCE_ID_MASK (3 << 14)
+#define ISCR_FORCE_ID_LOW (2 << 14)
+#define ISCR_FORCE_ID_HIGH (3 << 14)
+#define ISCR_FORCE_VBUS_MASK (3 << 12)
+#define ISCR_FORCE_VBUS_LOW (2 << 12)
+#define ISCR_FORCE_VBUS_HIGH (3 << 12)
+
+/* Common Control Bits for Both PHYs */
+#define PHY_PLL_BW 0x03
+#define PHY_RES45_CAL_EN 0x0c
+
+/* Private Control Bits for Each PHY */
+#define PHY_TX_AMPLITUDE_TUNE 0x20
+#define PHY_TX_SLEWRATE_TUNE 0x22
+#define PHY_VBUSVALID_TH_SEL 0x25
+#define PHY_PULLUP_RES_SEL 0x27
+#define PHY_OTG_FUNC_EN 0x28
+#define PHY_VBUS_DET_EN 0x29
+#define PHY_DISCON_TH_SEL 0x2a
+#define PHY_SQUELCH_DETECT 0x3c
+
+/* A83T specific control bits for PHY0 */
+#define PHY_CTL_VBUSVLDEXT BIT(5)
+#define PHY_CTL_SIDDQ BIT(3)
+
+/* A83T specific control bits for PHY2 HSIC */
+#define SUNXI_EHCI_HS_FORCE BIT(20)
+#define SUNXI_HSIC_CONNECT_DET BIT(17)
+#define SUNXI_HSIC_CONNECT_INT BIT(16)
+#define SUNXI_HSIC BIT(1)
+
+#define MAX_PHYS 4
+
+/*
+ * Note do not raise the debounce time, we must report Vusb high within 100ms
+ * otherwise we get Vbus errors
+ */
+#define DEBOUNCE_TIME msecs_to_jiffies(50)
+#define POLL_TIME msecs_to_jiffies(250)
+
+enum sun4i_usb_phy_type {
+ sun4i_a10_phy,
+ sun6i_a31_phy,
+ sun8i_a33_phy,
+ sun8i_a83t_phy,
+ sun8i_h3_phy,
+ sun8i_v3s_phy,
+ sun50i_a64_phy,
+};
+
+struct sun4i_usb_phy_cfg {
+ int num_phys;
+ int hsic_index;
+ enum sun4i_usb_phy_type type;
+ u32 disc_thresh;
+ u8 phyctl_offset;
+ bool dedicated_clocks;
+ bool enable_pmu_unk1;
+ bool phy0_dual_route;
+ int missing_phys;
+};
+
+struct sun4i_usb_phy_data {
+ void __iomem *base;
+ const struct sun4i_usb_phy_cfg *cfg;
+ enum usb_dr_mode dr_mode;
+ spinlock_t reg_lock; /* guard access to phyctl reg */
+ struct sun4i_usb_phy {
+ struct phy *phy;
+ void __iomem *pmu;
+ struct regulator *vbus;
+ struct reset_control *reset;
+ struct clk *clk;
+ struct clk *clk2;
+ bool regulator_on;
+ int index;
+ } phys[MAX_PHYS];
+ /* phy0 / otg related variables */
+ struct extcon_dev *extcon;
+ bool phy0_init;
+ struct gpio_desc *id_det_gpio;
+ struct gpio_desc *vbus_det_gpio;
+ struct power_supply *vbus_power_supply;
+ struct notifier_block vbus_power_nb;
+ bool vbus_power_nb_registered;
+ bool force_session_end;
+ int id_det_irq;
+ int vbus_det_irq;
+ int id_det;
+ int vbus_det;
+ struct delayed_work detect;
+};
+
+#define to_sun4i_usb_phy_data(phy) \
+ container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
+
+static void sun4i_usb_phy0_update_iscr(struct phy *_phy, u32 clr, u32 set)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ u32 iscr;
+
+ iscr = readl(data->base + REG_ISCR);
+ iscr &= ~clr;
+ iscr |= set;
+ writel(iscr, data->base + REG_ISCR);
+}
+
+static void sun4i_usb_phy0_set_id_detect(struct phy *phy, u32 val)
+{
+ if (val)
+ val = ISCR_FORCE_ID_HIGH;
+ else
+ val = ISCR_FORCE_ID_LOW;
+
+ sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_ID_MASK, val);
+}
+
+static void sun4i_usb_phy0_set_vbus_detect(struct phy *phy, u32 val)
+{
+ if (val)
+ val = ISCR_FORCE_VBUS_HIGH;
+ else
+ val = ISCR_FORCE_VBUS_LOW;
+
+ sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_VBUS_MASK, val);
+}
+
+static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
+ int len)
+{
+ struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
+ u32 temp, usbc_bit = BIT(phy->index * 2);
+ void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&phy_data->reg_lock, flags);
+
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* SoCs newer than A33 need us to set phyctl to 0 explicitly */
+ writel(0, phyctl);
+ }
+
+ for (i = 0; i < len; i++) {
+ temp = readl(phyctl);
+
+ /* clear the address portion */
+ temp &= ~(0xff << 8);
+
+ /* set the address */
+ temp |= ((addr + i) << 8);
+ writel(temp, phyctl);
+
+ /* set the data bit and clear usbc bit*/
+ temp = readb(phyctl);
+ if (data & 0x1)
+ temp |= PHYCTL_DATA;
+ else
+ temp &= ~PHYCTL_DATA;
+ temp &= ~usbc_bit;
+ writeb(temp, phyctl);
+
+ /* pulse usbc_bit */
+ temp = readb(phyctl);
+ temp |= usbc_bit;
+ writeb(temp, phyctl);
+
+ temp = readb(phyctl);
+ temp &= ~usbc_bit;
+ writeb(temp, phyctl);
+
+ data >>= 1;
+ }
+
+ spin_unlock_irqrestore(&phy_data->reg_lock, flags);
+}
+
+static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
+{
+ struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
+ u32 bits, reg_value;
+
+ if (!phy->pmu)
+ return;
+
+ bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
+ SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
+
+ /* A83T USB2 is HSIC */
+ if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2)
+ bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
+ SUNXI_HSIC;
+
+ reg_value = readl(phy->pmu);
+
+ if (enable)
+ reg_value |= bits;
+ else
+ reg_value &= ~bits;
+
+ writel(reg_value, phy->pmu);
+}
+
+static int sun4i_usb_phy_init(struct phy *_phy)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(phy->clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->clk2);
+ if (ret) {
+ clk_disable_unprepare(phy->clk);
+ return ret;
+ }
+
+ ret = reset_control_deassert(phy->reset);
+ if (ret) {
+ clk_disable_unprepare(phy->clk2);
+ clk_disable_unprepare(phy->clk);
+ return ret;
+ }
+
+ if (data->cfg->type == sun8i_a83t_phy) {
+ if (phy->index == 0) {
+ val = readl(data->base + data->cfg->phyctl_offset);
+ val |= PHY_CTL_VBUSVLDEXT;
+ val &= ~PHY_CTL_SIDDQ;
+ writel(val, data->base + data->cfg->phyctl_offset);
+ }
+ } else {
+ if (phy->pmu && data->cfg->enable_pmu_unk1) {
+ val = readl(phy->pmu + REG_PMU_UNK1);
+ writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+ }
+
+ /* Enable USB 45 Ohm resistor calibration */
+ if (phy->index == 0)
+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+
+ /* Adjust PHY's magnitude and rate */
+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+ /* Disconnect threshold adjustment */
+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+ data->cfg->disc_thresh, 2);
+ }
+
+ sun4i_usb_phy_passby(phy, 1);
+
+ if (phy->index == 0) {
+ data->phy0_init = true;
+
+ /* Enable pull-ups */
+ sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
+ sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
+
+ /* Force ISCR and cable state updates */
+ data->id_det = -1;
+ data->vbus_det = -1;
+ queue_delayed_work(system_wq, &data->detect, 0);
+ }
+
+ return 0;
+}
+
+static int sun4i_usb_phy_exit(struct phy *_phy)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+
+ if (phy->index == 0) {
+ if (data->cfg->type == sun8i_a83t_phy) {
+ void __iomem *phyctl = data->base +
+ data->cfg->phyctl_offset;
+
+ writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
+ }
+
+ /* Disable pull-ups */
+ sun4i_usb_phy0_update_iscr(_phy, ISCR_DPDM_PULLUP_EN, 0);
+ sun4i_usb_phy0_update_iscr(_phy, ISCR_ID_PULLUP_EN, 0);
+ data->phy0_init = false;
+ }
+
+ sun4i_usb_phy_passby(phy, 0);
+ reset_control_assert(phy->reset);
+ clk_disable_unprepare(phy->clk2);
+ clk_disable_unprepare(phy->clk);
+
+ return 0;
+}
+
+static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
+{
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ if (data->id_det_gpio)
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ else
+ return 1; /* Fallback to peripheral mode */
+ case USB_DR_MODE_HOST:
+ return 0;
+ case USB_DR_MODE_PERIPHERAL:
+ default:
+ return 1;
+ }
+}
+
+static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
+{
+ if (data->vbus_det_gpio)
+ return gpiod_get_value_cansleep(data->vbus_det_gpio);
+
+ if (data->vbus_power_supply) {
+ union power_supply_propval val;
+ int r;
+
+ r = power_supply_get_property(data->vbus_power_supply,
+ POWER_SUPPLY_PROP_PRESENT, &val);
+ if (r == 0)
+ return val.intval;
+ }
+
+ /* Fallback: report vbus as high */
+ return 1;
+}
+
+static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data)
+{
+ return data->vbus_det_gpio || data->vbus_power_supply;
+}
+
+static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
+{
+ if ((data->id_det_gpio && data->id_det_irq <= 0) ||
+ (data->vbus_det_gpio && data->vbus_det_irq <= 0))
+ return true;
+
+ /*
+ * The A31/A23/A33 companion pmics (AXP221/AXP223) do not
+ * generate vbus change interrupts when the board is driving
+ * vbus using the N_VBUSEN pin on the pmic, so we must poll
+ * when using the pmic for vbus-det _and_ we're driving vbus.
+ */
+ if ((data->cfg->type == sun6i_a31_phy ||
+ data->cfg->type == sun8i_a33_phy) &&
+ data->vbus_power_supply && data->phys[0].regulator_on)
+ return true;
+
+ return false;
+}
+
+static int sun4i_usb_phy_power_on(struct phy *_phy)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ int ret;
+
+ if (!phy->vbus || phy->regulator_on)
+ return 0;
+
+ /* For phy0 only turn on Vbus if we don't have an ext. Vbus */
+ if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
+ data->vbus_det) {
+ dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
+ return 0;
+ }
+
+ ret = regulator_enable(phy->vbus);
+ if (ret)
+ return ret;
+
+ phy->regulator_on = true;
+
+ /* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
+ if (phy->index == 0 && sun4i_usb_phy0_poll(data))
+ mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
+
+ return 0;
+}
+
+static int sun4i_usb_phy_power_off(struct phy *_phy)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+
+ if (!phy->vbus || !phy->regulator_on)
+ return 0;
+
+ regulator_disable(phy->vbus);
+ phy->regulator_on = false;
+
+ /*
+ * phy0 vbus typically slowly discharges, sometimes this causes the
+ * Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
+ */
+ if (phy->index == 0 && !sun4i_usb_phy0_poll(data))
+ mod_delayed_work(system_wq, &data->detect, POLL_TIME);
+
+ return 0;
+}
+
+static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ int new_mode;
+
+ if (phy->index != 0) {
+ if (mode == PHY_MODE_USB_HOST)
+ return 0;
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ new_mode = USB_DR_MODE_HOST;
+ break;
+ case PHY_MODE_USB_DEVICE:
+ new_mode = USB_DR_MODE_PERIPHERAL;
+ break;
+ case PHY_MODE_USB_OTG:
+ new_mode = USB_DR_MODE_OTG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (new_mode != data->dr_mode) {
+ dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
+ data->dr_mode = new_mode;
+ }
+
+ data->id_det = -1; /* Force reprocessing of id */
+ data->force_session_end = true;
+ queue_delayed_work(system_wq, &data->detect, 0);
+
+ return 0;
+}
+
+void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+
+ sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
+}
+EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect);
+
+static const struct phy_ops sun4i_usb_phy_ops = {
+ .init = sun4i_usb_phy_init,
+ .exit = sun4i_usb_phy_exit,
+ .power_on = sun4i_usb_phy_power_on,
+ .power_off = sun4i_usb_phy_power_off,
+ .set_mode = sun4i_usb_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, int id_det)
+{
+ u32 regval;
+
+ regval = readl(data->base + REG_PHY_OTGCTL);
+ if (id_det == 0) {
+ /* Host mode. Route phy0 to EHCI/OHCI */
+ regval &= ~OTGCTL_ROUTE_MUSB;
+ } else {
+ /* Peripheral mode. Route phy0 to MUSB */
+ regval |= OTGCTL_ROUTE_MUSB;
+ }
+ writel(regval, data->base + REG_PHY_OTGCTL);
+}
+
+static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
+{
+ struct sun4i_usb_phy_data *data =
+ container_of(work, struct sun4i_usb_phy_data, detect.work);
+ struct phy *phy0 = data->phys[0].phy;
+ struct sun4i_usb_phy *phy;
+ bool force_session_end, id_notify = false, vbus_notify = false;
+ int id_det, vbus_det;
+
+ if (!phy0)
+ return;
+
+ phy = phy_get_drvdata(phy0);
+ id_det = sun4i_usb_phy0_get_id_det(data);
+ vbus_det = sun4i_usb_phy0_get_vbus_det(data);
+
+ mutex_lock(&phy0->mutex);
+
+ if (!data->phy0_init) {
+ mutex_unlock(&phy0->mutex);
+ return;
+ }
+
+ force_session_end = data->force_session_end;
+ data->force_session_end = false;
+
+ if (id_det != data->id_det) {
+ /* id-change, force session end if we've no vbus detection */
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data))
+ force_session_end = true;
+
+ /* When entering host mode (id = 0) force end the session now */
+ if (force_session_end && id_det == 0) {
+ sun4i_usb_phy0_set_vbus_detect(phy0, 0);
+ msleep(200);
+ sun4i_usb_phy0_set_vbus_detect(phy0, 1);
+ }
+ sun4i_usb_phy0_set_id_detect(phy0, id_det);
+ data->id_det = id_det;
+ id_notify = true;
+ }
+
+ if (vbus_det != data->vbus_det) {
+ sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
+ data->vbus_det = vbus_det;
+ vbus_notify = true;
+ }
+
+ mutex_unlock(&phy0->mutex);
+
+ if (id_notify) {
+ extcon_set_state_sync(data->extcon, EXTCON_USB_HOST,
+ !id_det);
+ /* When leaving host mode force end the session here */
+ if (force_session_end && id_det == 1) {
+ mutex_lock(&phy0->mutex);
+ sun4i_usb_phy0_set_vbus_detect(phy0, 0);
+ msleep(1000);
+ sun4i_usb_phy0_set_vbus_detect(phy0, 1);
+ mutex_unlock(&phy0->mutex);
+ }
+
+ /* Enable PHY0 passby for host mode only. */
+ sun4i_usb_phy_passby(phy, !id_det);
+
+ /* Re-route PHY0 if necessary */
+ if (data->cfg->phy0_dual_route)
+ sun4i_usb_phy0_reroute(data, id_det);
+ }
+
+ if (vbus_notify)
+ extcon_set_state_sync(data->extcon, EXTCON_USB, vbus_det);
+
+ if (sun4i_usb_phy0_poll(data))
+ queue_delayed_work(system_wq, &data->detect, POLL_TIME);
+}
+
+static irqreturn_t sun4i_usb_phy0_id_vbus_det_irq(int irq, void *dev_id)
+{
+ struct sun4i_usb_phy_data *data = dev_id;
+
+ /* vbus or id changed, let the pins settle and then scan them */
+ mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
+
+ return IRQ_HANDLED;
+}
+
+static int sun4i_usb_phy0_vbus_notify(struct notifier_block *nb,
+ unsigned long val, void *v)
+{
+ struct sun4i_usb_phy_data *data =
+ container_of(nb, struct sun4i_usb_phy_data, vbus_power_nb);
+ struct power_supply *psy = v;
+
+ /* Properties on the vbus_power_supply changed, scan vbus_det */
+ if (val == PSY_EVENT_PROP_CHANGED && psy == data->vbus_power_supply)
+ mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
+
+ return NOTIFY_OK;
+}
+
+static struct phy *sun4i_usb_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
+
+ if (args->args[0] >= data->cfg->num_phys)
+ return ERR_PTR(-ENODEV);
+
+ if (data->cfg->missing_phys & BIT(args->args[0]))
+ return ERR_PTR(-ENODEV);
+
+ return data->phys[args->args[0]].phy;
+}
+
+static int sun4i_usb_phy_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
+
+ if (data->vbus_power_nb_registered)
+ power_supply_unreg_notifier(&data->vbus_power_nb);
+ if (data->id_det_irq > 0)
+ devm_free_irq(dev, data->id_det_irq, data);
+ if (data->vbus_det_irq > 0)
+ devm_free_irq(dev, data->vbus_det_irq, data);
+
+ cancel_delayed_work_sync(&data->detect);
+
+ return 0;
+}
+
+static const unsigned int sun4i_usb_phy0_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
+static int sun4i_usb_phy_probe(struct platform_device *pdev)
+{
+ struct sun4i_usb_phy_data *data;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ int i, ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->reg_lock);
+ INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
+ dev_set_drvdata(dev, data);
+ data->cfg = of_device_get_match_data(dev);
+ if (!data->cfg)
+ return -EINVAL;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
+ data->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+
+ data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
+ GPIOD_IN);
+ if (IS_ERR(data->id_det_gpio)) {
+ dev_err(dev, "Couldn't request ID GPIO\n");
+ return PTR_ERR(data->id_det_gpio);
+ }
+
+ data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
+ GPIOD_IN);
+ if (IS_ERR(data->vbus_det_gpio)) {
+ dev_err(dev, "Couldn't request VBUS detect GPIO\n");
+ return PTR_ERR(data->vbus_det_gpio);
+ }
+
+ if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
+ data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
+ "usb0_vbus_power-supply");
+ if (IS_ERR(data->vbus_power_supply)) {
+ dev_err(dev, "Couldn't get the VBUS power supply\n");
+ return PTR_ERR(data->vbus_power_supply);
+ }
+
+ if (!data->vbus_power_supply)
+ return -EPROBE_DEFER;
+ }
+
+ data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
+
+ data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+ if (IS_ERR(data->extcon)) {
+ dev_err(dev, "Couldn't allocate our extcon device\n");
+ return PTR_ERR(data->extcon);
+ }
+
+ ret = devm_extcon_dev_register(dev, data->extcon);
+ if (ret) {
+ dev_err(dev, "failed to register extcon: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < data->cfg->num_phys; i++) {
+ struct sun4i_usb_phy *phy = data->phys + i;
+ char name[16];
+
+ if (data->cfg->missing_phys & BIT(i))
+ continue;
+
+ snprintf(name, sizeof(name), "usb%d_vbus", i);
+ phy->vbus = devm_regulator_get_optional(dev, name);
+ if (IS_ERR(phy->vbus)) {
+ if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
+ dev_err(dev,
+ "Couldn't get regulator %s... Deferring probe\n",
+ name);
+ return -EPROBE_DEFER;
+ }
+
+ phy->vbus = NULL;
+ }
+
+ if (data->cfg->dedicated_clocks)
+ snprintf(name, sizeof(name), "usb%d_phy", i);
+ else
+ strlcpy(name, "usb_phy", sizeof(name));
+
+ phy->clk = devm_clk_get(dev, name);
+ if (IS_ERR(phy->clk)) {
+ dev_err(dev, "failed to get clock %s\n", name);
+ return PTR_ERR(phy->clk);
+ }
+
+ /* The first PHY is always tied to OTG, and never HSIC */
+ if (data->cfg->hsic_index && i == data->cfg->hsic_index) {
+ /* HSIC needs secondary clock */
+ snprintf(name, sizeof(name), "usb%d_hsic_12M", i);
+ phy->clk2 = devm_clk_get(dev, name);
+ if (IS_ERR(phy->clk2)) {
+ dev_err(dev, "failed to get clock %s\n", name);
+ return PTR_ERR(phy->clk2);
+ }
+ }
+
+ snprintf(name, sizeof(name), "usb%d_reset", i);
+ phy->reset = devm_reset_control_get(dev, name);
+ if (IS_ERR(phy->reset)) {
+ dev_err(dev, "failed to get reset %s\n", name);
+ return PTR_ERR(phy->reset);
+ }
+
+ if (i || data->cfg->phy0_dual_route) { /* No pmu for musb */
+ snprintf(name, sizeof(name), "pmu%d", i);
+ res = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, name);
+ phy->pmu = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->pmu))
+ return PTR_ERR(phy->pmu);
+ }
+
+ phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY %d\n", i);
+ return PTR_ERR(phy->phy);
+ }
+
+ phy->index = i;
+ phy_set_drvdata(phy->phy, &data->phys[i]);
+ }
+
+ data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
+ if (data->id_det_irq > 0) {
+ ret = devm_request_irq(dev, data->id_det_irq,
+ sun4i_usb_phy0_id_vbus_det_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "usb0-id-det", data);
+ if (ret) {
+ dev_err(dev, "Err requesting id-det-irq: %d\n", ret);
+ return ret;
+ }
+ }
+
+ data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
+ if (data->vbus_det_irq > 0) {
+ ret = devm_request_irq(dev, data->vbus_det_irq,
+ sun4i_usb_phy0_id_vbus_det_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "usb0-vbus-det", data);
+ if (ret) {
+ dev_err(dev, "Err requesting vbus-det-irq: %d\n", ret);
+ data->vbus_det_irq = -1;
+ sun4i_usb_phy_remove(pdev); /* Stop detect work */
+ return ret;
+ }
+ }
+
+ if (data->vbus_power_supply) {
+ data->vbus_power_nb.notifier_call = sun4i_usb_phy0_vbus_notify;
+ data->vbus_power_nb.priority = 0;
+ ret = power_supply_reg_notifier(&data->vbus_power_nb);
+ if (ret) {
+ sun4i_usb_phy_remove(pdev); /* Stop detect work */
+ return ret;
+ }
+ data->vbus_power_nb_registered = true;
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ sun4i_usb_phy_remove(pdev); /* Stop detect work */
+ return PTR_ERR(phy_provider);
+ }
+
+ dev_dbg(dev, "successfully loaded\n");
+
+ return 0;
+}
+
+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
+ .num_phys = 2,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
+ .num_phys = 3,
+ .type = sun6i_a31_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
+ .num_phys = 2,
+ .type = sun6i_a31_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+ .num_phys = 2,
+ .type = sun8i_a33_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
+ .num_phys = 3,
+ .hsic_index = 2,
+ .type = sun8i_a83t_phy,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
+ .num_phys = 4,
+ .type = sun8i_h3_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+ .phy0_dual_route = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
+ .num_phys = 1,
+ .type = sun8i_v3s_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+ .num_phys = 2,
+ .type = sun50i_a64_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+ .phy0_dual_route = true,
+};
+
+static const struct of_device_id sun4i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
+ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+ { .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg },
+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
+ { .compatible = "allwinner,sun50i-a64-usb-phy",
+ .data = &sun50i_a64_cfg},
+ { },
+};
+MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
+
+static struct platform_driver sun4i_usb_phy_driver = {
+ .probe = sun4i_usb_phy_probe,
+ .remove = sun4i_usb_phy_remove,
+ .driver = {
+ .of_match_table = sun4i_usb_phy_of_match,
+ .name = "sun4i-usb-phy",
+ }
+};
+module_platform_driver(sun4i_usb_phy_driver);
+
+MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun9i-usb.c b/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun9i-usb.c
new file mode 100644
index 0000000..28fce4b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/phy/allwinner/phy-sun9i-usb.c
@@ -0,0 +1,202 @@
+/*
+ * Allwinner sun9i USB phy driver
+ *
+ * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on phy-sun4i-usb.c from
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * and code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#define SUNXI_AHB_INCR16_BURST_EN BIT(11)
+#define SUNXI_AHB_INCR8_BURST_EN BIT(10)
+#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
+#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
+#define SUNXI_ULPI_BYPASS_EN BIT(0)
+
+/* usb1 HSIC specific bits */
+#define SUNXI_EHCI_HS_FORCE BIT(20)
+#define SUNXI_HSIC_CONNECT_DET BIT(17)
+#define SUNXI_HSIC_CONNECT_INT BIT(16)
+#define SUNXI_HSIC BIT(1)
+
+struct sun9i_usb_phy {
+ struct phy *phy;
+ void __iomem *pmu;
+ struct reset_control *reset;
+ struct clk *clk;
+ struct clk *hsic_clk;
+ enum usb_phy_interface type;
+};
+
+static void sun9i_usb_phy_passby(struct sun9i_usb_phy *phy, int enable)
+{
+ u32 bits, reg_value;
+
+ bits = SUNXI_AHB_INCR16_BURST_EN | SUNXI_AHB_INCR8_BURST_EN |
+ SUNXI_AHB_INCR4_BURST_EN | SUNXI_AHB_INCRX_ALIGN_EN |
+ SUNXI_ULPI_BYPASS_EN;
+
+ if (phy->type == USBPHY_INTERFACE_MODE_HSIC)
+ bits |= SUNXI_HSIC | SUNXI_EHCI_HS_FORCE |
+ SUNXI_HSIC_CONNECT_DET | SUNXI_HSIC_CONNECT_INT;
+
+ reg_value = readl(phy->pmu);
+
+ if (enable)
+ reg_value |= bits;
+ else
+ reg_value &= ~bits;
+
+ writel(reg_value, phy->pmu);
+}
+
+static int sun9i_usb_phy_init(struct phy *_phy)
+{
+ struct sun9i_usb_phy *phy = phy_get_drvdata(_phy);
+ int ret;
+
+ ret = clk_prepare_enable(phy->clk);
+ if (ret)
+ goto err_clk;
+
+ ret = clk_prepare_enable(phy->hsic_clk);
+ if (ret)
+ goto err_hsic_clk;
+
+ ret = reset_control_deassert(phy->reset);
+ if (ret)
+ goto err_reset;
+
+ sun9i_usb_phy_passby(phy, 1);
+ return 0;
+
+err_reset:
+ clk_disable_unprepare(phy->hsic_clk);
+
+err_hsic_clk:
+ clk_disable_unprepare(phy->clk);
+
+err_clk:
+ return ret;
+}
+
+static int sun9i_usb_phy_exit(struct phy *_phy)
+{
+ struct sun9i_usb_phy *phy = phy_get_drvdata(_phy);
+
+ sun9i_usb_phy_passby(phy, 0);
+ reset_control_assert(phy->reset);
+ clk_disable_unprepare(phy->hsic_clk);
+ clk_disable_unprepare(phy->clk);
+
+ return 0;
+}
+
+static const struct phy_ops sun9i_usb_phy_ops = {
+ .init = sun9i_usb_phy_init,
+ .exit = sun9i_usb_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int sun9i_usb_phy_probe(struct platform_device *pdev)
+{
+ struct sun9i_usb_phy *phy;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->type = of_usb_get_phy_mode(np);
+ if (phy->type == USBPHY_INTERFACE_MODE_HSIC) {
+ phy->clk = devm_clk_get(dev, "hsic_480M");
+ if (IS_ERR(phy->clk)) {
+ dev_err(dev, "failed to get hsic_480M clock\n");
+ return PTR_ERR(phy->clk);
+ }
+
+ phy->hsic_clk = devm_clk_get(dev, "hsic_12M");
+ if (IS_ERR(phy->hsic_clk)) {
+ dev_err(dev, "failed to get hsic_12M clock\n");
+ return PTR_ERR(phy->hsic_clk);
+ }
+
+ phy->reset = devm_reset_control_get(dev, "hsic");
+ if (IS_ERR(phy->reset)) {
+ dev_err(dev, "failed to get reset control\n");
+ return PTR_ERR(phy->reset);
+ }
+ } else {
+ phy->clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(phy->clk)) {
+ dev_err(dev, "failed to get phy clock\n");
+ return PTR_ERR(phy->clk);
+ }
+
+ phy->reset = devm_reset_control_get(dev, "phy");
+ if (IS_ERR(phy->reset)) {
+ dev_err(dev, "failed to get reset control\n");
+ return PTR_ERR(phy->reset);
+ }
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->pmu = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->pmu))
+ return PTR_ERR(phy->pmu);
+
+ phy->phy = devm_phy_create(dev, NULL, &sun9i_usb_phy_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
+ }
+
+ phy_set_drvdata(phy->phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id sun9i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun9i-a80-usb-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sun9i_usb_phy_of_match);
+
+static struct platform_driver sun9i_usb_phy_driver = {
+ .probe = sun9i_usb_phy_probe,
+ .driver = {
+ .of_match_table = sun9i_usb_phy_of_match,
+ .name = "sun9i-usb-phy",
+ }
+};
+module_platform_driver(sun9i_usb_phy_driver);
+
+MODULE_DESCRIPTION("Allwinner sun9i USB phy driver");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL");