[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/src/kernel/linux/v4.14/drivers/phy/renesas/phy-rcar-gen3-usb3.c
new file mode 100644
index 0000000..88c83c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -0,0 +1,226 @@
+/*
+ * Renesas R-Car Gen3 for USB3.0 PHY driver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define USB30_CLKSET0 0x034
+#define USB30_CLKSET1 0x036
+#define USB30_SSC_SET 0x038
+#define USB30_PHY_ENABLE 0x060
+#define USB30_VBUS_EN 0x064
+
+/* USB30_CLKSET0 */
+#define CLKSET0_PRIVATE 0x05c0
+#define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002
+
+/* USB30_CLKSET1 */
+#define CLKSET1_USB30_PLL_MULTI_SHIFT 6
+#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \
+ CLKSET1_USB30_PLL_MULTI_SHIFT)
+#define CLKSET1_PHYRESET BIT(4) /* 1: reset */
+#define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */
+#define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */
+#define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */
+
+/* USB30_SSC_SET */
+#define SSC_SET_SSC_EN BIT(12)
+#define SSC_SET_RANGE_SHIFT 9
+#define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT)
+
+/* USB30_PHY_ENABLE */
+#define PHY_ENABLE_RESET_EN BIT(4)
+
+/* USB30_VBUS_EN */
+#define VBUS_EN_VBUS_EN BIT(1)
+
+struct rcar_gen3_usb3 {
+ void __iomem *base;
+ struct phy *phy;
+ u32 ssc_range;
+ bool usb3s_clk;
+ bool usb_extal;
+};
+
+static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset)
+{
+ u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL |
+ CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1;
+
+ if (reset)
+ val |= CLKSET1_PHYRESET;
+
+ writew(val, r->base + USB30_CLKSET1);
+}
+
+static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r)
+{
+ u16 val = SSC_SET_SSC_EN;
+
+ switch (r->ssc_range) {
+ case 4980:
+ val |= SSC_SET_RANGE_4980;
+ break;
+ case 4492:
+ val |= SSC_SET_RANGE_4492;
+ break;
+ case 4003:
+ val |= SSC_SET_RANGE_4003;
+ break;
+ default:
+ dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__,
+ r->ssc_range);
+ return;
+ }
+
+ writew(val, r->base + USB30_SSC_SET);
+}
+
+static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r)
+{
+ write_clkset1_for_usb_extal(r, false);
+ if (r->ssc_range)
+ rcar_gen3_phy_usb3_enable_ssc(r);
+ writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL,
+ r->base + USB30_CLKSET0);
+ writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE);
+ write_clkset1_for_usb_extal(r, true);
+ usleep_range(10, 20);
+ write_clkset1_for_usb_extal(r, false);
+}
+
+static int rcar_gen3_phy_usb3_init(struct phy *p)
+{
+ struct rcar_gen3_usb3 *r = phy_get_drvdata(p);
+
+ dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__,
+ r->usb3s_clk, r->usb_extal, r->ssc_range);
+
+ if (!r->usb3s_clk && r->usb_extal)
+ rcar_gen3_phy_usb3_select_usb_extal(r);
+
+ /* Enables VBUS detection anyway */
+ writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN);
+
+ return 0;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb3_ops = {
+ .init = rcar_gen3_phy_usb3_init,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = {
+ { .compatible = "renesas,rcar-gen3-usb3-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table);
+
+static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen3_usb3 *r;
+ struct phy_provider *provider;
+ struct resource *res;
+ int ret = 0;
+ struct clk *clk;
+
+ if (!dev->of_node) {
+ dev_err(dev, "This driver needs device tree\n");
+ return -EINVAL;
+ }
+
+ r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ r->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(r->base))
+ return PTR_ERR(r->base);
+
+ clk = devm_clk_get(dev, "usb3s_clk");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb3s_clk = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+ clk = devm_clk_get(dev, "usb_extal");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb_extal = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+
+ if (!r->usb3s_clk && !r->usb_extal) {
+ dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime pm for this device.
+ */
+ pm_runtime_enable(dev);
+
+ r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops);
+ if (IS_ERR(r->phy)) {
+ dev_err(dev, "Failed to create USB3 PHY\n");
+ ret = PTR_ERR(r->phy);
+ goto error;
+ }
+
+ of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range);
+
+ platform_set_drvdata(pdev, r);
+ phy_set_drvdata(r->phy, r);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ ret = PTR_ERR(provider);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb3_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_usb3",
+ .of_match_table = rcar_gen3_phy_usb3_match_table,
+ },
+ .probe = rcar_gen3_phy_usb3_probe,
+ .remove = rcar_gen3_phy_usb3_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");