[Feature]add MT2731_MP2_MR2_SVN388 baseline version

Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig
new file mode 100644
index 0000000..e8c4e4f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig
@@ -0,0 +1,117 @@
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
+	depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select REGMAP_MMIO
+	default ARCH_BCM_MOBILE
+	help
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
+	  framework.  GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+	bool
+	select PINMUX
+	select PINCONF
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_IPROC_GPIO
+	bool "Broadcom iProc GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_IPROC
+	help
+	  Say yes here to enable the Broadcom iProc GPIO driver.
+
+	  The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+	  same GPIO Controller IP hence this driver could be used for all.
+
+	  The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
+	  GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
+	  the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
+	  supported by this driver.
+
+	  The Broadcom NSP has two GPIO controllers including the ChipcommonA
+	  GPIO, the ChipcommonB GPIO. Later controller is supported by this
+	  driver.
+
+	  The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+	  the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+	  The Broadcom Stingray GPIO controllers are supported by this driver.
+
+	  All above SoCs GPIO controllers support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
+
+	  It provides the framework where pins from the individual GPIO can be
+	  individually muxed to GPIO function, through interaction with the
+	  SoCs IOMUX controller. This features could be used only on SoCs which
+	  support individual pin muxing.
+
+config PINCTRL_CYGNUS_MUX
+	bool "Broadcom Cygnus IOMUX driver"
+	depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+	depends on OF
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_CYGNUS
+	help
+	  Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
+	  configuration, with the exception that certain individual pins
+	  can be overridden to GPIO function
+
+config PINCTRL_NSP_GPIO
+	bool "Broadcom NSP GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP GPIO driver.
+
+	  The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+	  supported by this driver.
+
+	  The ChipcommonA GPIO controller support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
+
+config PINCTRL_NS2_MUX
+	bool "Broadcom Northstar2 pinmux driver"
+	depends on OF
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARM64 && ARCH_BCM_IPROC
+	help
+	  Say yes here to enable the Broadcom NS2 MUX driver.
+
+	  The Broadcom Northstar2 IOMUX driver supports group based IOMUX
+	  configuration.
+
+config PINCTRL_NSP_MUX
+	bool "Broadcom NSP IOMUX driver"
+	depends on (ARCH_BCM_NSP || COMPILE_TEST)
+	depends on OF
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP SOC IOMUX driver.
+
+	  The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX
+	  configuration, with certain individual pins can be overridden
+	  to GPIO function.
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Makefile b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Makefile
new file mode 100644
index 0000000..80ceb9d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+# Broadcom pinctrl support
+
+obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
+obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
+obj-$(CONFIG_PINCTRL_NSP_GPIO)		+= pinctrl-nsp-gpio.o
+obj-$(CONFIG_PINCTRL_NS2_MUX)		+= pinctrl-ns2-mux.o
+obj-$(CONFIG_PINCTRL_NSP_MUX)		+= pinctrl-nsp-mux.o
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
new file mode 100644
index 0000000..bc3b232
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -0,0 +1,1448 @@
+/*
+ * Copyright (C) 2013-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+/* BCM281XX Pin Control Registers Definitions */
+
+/* Function Select bits are the same for all pin control registers */
+#define BCM281XX_PIN_REG_F_SEL_MASK		0x0700
+#define BCM281XX_PIN_REG_F_SEL_SHIFT		8
+
+/* Standard pin register */
+#define BCM281XX_STD_PIN_REG_DRV_STR_MASK	0x0007
+#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT	0
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_STD_PIN_REG_SLEW_MASK		0x0010
+#define BCM281XX_STD_PIN_REG_SLEW_SHIFT		4
+#define BCM281XX_STD_PIN_REG_PULL_UP_MASK	0x0020
+#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT	5
+#define BCM281XX_STD_PIN_REG_PULL_DN_MASK	0x0040
+#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT	6
+#define BCM281XX_STD_PIN_REG_HYST_MASK		0x0080
+#define BCM281XX_STD_PIN_REG_HYST_SHIFT		7
+
+/* I2C pin register */
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK	0x0004
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT	2
+#define BCM281XX_I2C_PIN_REG_SLEW_MASK		0x0008
+#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT		3
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK	0x0070
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT	4
+
+/* HDMI pin register */
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_HDMI_PIN_REG_MODE_MASK		0x0010
+#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT	4
+
+/**
+ * bcm281xx_pin_type - types of pin register
+ */
+enum bcm281xx_pin_type {
+	BCM281XX_PIN_TYPE_UNKNOWN = 0,
+	BCM281XX_PIN_TYPE_STD,
+	BCM281XX_PIN_TYPE_I2C,
+	BCM281XX_PIN_TYPE_HDMI,
+};
+
+static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
+static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
+static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
+
+/**
+ * bcm281xx_pin_function- define pin function
+ */
+struct bcm281xx_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned ngroups;
+};
+
+/**
+ * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
+ * @reg_base - base of pinctrl registers
+ */
+struct bcm281xx_pinctrl_data {
+	void __iomem *reg_base;
+
+	/* List of all pins */
+	const struct pinctrl_pin_desc *pins;
+	const unsigned npins;
+
+	const struct bcm281xx_pin_function *functions;
+	const unsigned nfunctions;
+
+	struct regmap *regmap;
+};
+
+/*
+ * Pin number definition.  The order here must be the same as defined in the
+ * PADCTRLREG block in the RDB.
+ */
+#define BCM281XX_PIN_ADCSYNC		0
+#define BCM281XX_PIN_BAT_RM		1
+#define BCM281XX_PIN_BSC1_SCL		2
+#define BCM281XX_PIN_BSC1_SDA		3
+#define BCM281XX_PIN_BSC2_SCL		4
+#define BCM281XX_PIN_BSC2_SDA		5
+#define BCM281XX_PIN_CLASSGPWR		6
+#define BCM281XX_PIN_CLK_CX8		7
+#define BCM281XX_PIN_CLKOUT_0		8
+#define BCM281XX_PIN_CLKOUT_1		9
+#define BCM281XX_PIN_CLKOUT_2		10
+#define BCM281XX_PIN_CLKOUT_3		11
+#define BCM281XX_PIN_CLKREQ_IN_0	12
+#define BCM281XX_PIN_CLKREQ_IN_1	13
+#define BCM281XX_PIN_CWS_SYS_REQ1	14
+#define BCM281XX_PIN_CWS_SYS_REQ2	15
+#define BCM281XX_PIN_CWS_SYS_REQ3	16
+#define BCM281XX_PIN_DIGMIC1_CLK	17
+#define BCM281XX_PIN_DIGMIC1_DQ		18
+#define BCM281XX_PIN_DIGMIC2_CLK	19
+#define BCM281XX_PIN_DIGMIC2_DQ		20
+#define BCM281XX_PIN_GPEN13		21
+#define BCM281XX_PIN_GPEN14		22
+#define BCM281XX_PIN_GPEN15		23
+#define BCM281XX_PIN_GPIO00		24
+#define BCM281XX_PIN_GPIO01		25
+#define BCM281XX_PIN_GPIO02		26
+#define BCM281XX_PIN_GPIO03		27
+#define BCM281XX_PIN_GPIO04		28
+#define BCM281XX_PIN_GPIO05		29
+#define BCM281XX_PIN_GPIO06		30
+#define BCM281XX_PIN_GPIO07		31
+#define BCM281XX_PIN_GPIO08		32
+#define BCM281XX_PIN_GPIO09		33
+#define BCM281XX_PIN_GPIO10		34
+#define BCM281XX_PIN_GPIO11		35
+#define BCM281XX_PIN_GPIO12		36
+#define BCM281XX_PIN_GPIO13		37
+#define BCM281XX_PIN_GPIO14		38
+#define BCM281XX_PIN_GPS_PABLANK	39
+#define BCM281XX_PIN_GPS_TMARK		40
+#define BCM281XX_PIN_HDMI_SCL		41
+#define BCM281XX_PIN_HDMI_SDA		42
+#define BCM281XX_PIN_IC_DM		43
+#define BCM281XX_PIN_IC_DP		44
+#define BCM281XX_PIN_KP_COL_IP_0	45
+#define BCM281XX_PIN_KP_COL_IP_1	46
+#define BCM281XX_PIN_KP_COL_IP_2	47
+#define BCM281XX_PIN_KP_COL_IP_3	48
+#define BCM281XX_PIN_KP_ROW_OP_0	49
+#define BCM281XX_PIN_KP_ROW_OP_1	50
+#define BCM281XX_PIN_KP_ROW_OP_2	51
+#define BCM281XX_PIN_KP_ROW_OP_3	52
+#define BCM281XX_PIN_LCD_B_0		53
+#define BCM281XX_PIN_LCD_B_1		54
+#define BCM281XX_PIN_LCD_B_2		55
+#define BCM281XX_PIN_LCD_B_3		56
+#define BCM281XX_PIN_LCD_B_4		57
+#define BCM281XX_PIN_LCD_B_5		58
+#define BCM281XX_PIN_LCD_B_6		59
+#define BCM281XX_PIN_LCD_B_7		60
+#define BCM281XX_PIN_LCD_G_0		61
+#define BCM281XX_PIN_LCD_G_1		62
+#define BCM281XX_PIN_LCD_G_2		63
+#define BCM281XX_PIN_LCD_G_3		64
+#define BCM281XX_PIN_LCD_G_4		65
+#define BCM281XX_PIN_LCD_G_5		66
+#define BCM281XX_PIN_LCD_G_6		67
+#define BCM281XX_PIN_LCD_G_7		68
+#define BCM281XX_PIN_LCD_HSYNC		69
+#define BCM281XX_PIN_LCD_OE		70
+#define BCM281XX_PIN_LCD_PCLK		71
+#define BCM281XX_PIN_LCD_R_0		72
+#define BCM281XX_PIN_LCD_R_1		73
+#define BCM281XX_PIN_LCD_R_2		74
+#define BCM281XX_PIN_LCD_R_3		75
+#define BCM281XX_PIN_LCD_R_4		76
+#define BCM281XX_PIN_LCD_R_5		77
+#define BCM281XX_PIN_LCD_R_6		78
+#define BCM281XX_PIN_LCD_R_7		79
+#define BCM281XX_PIN_LCD_VSYNC		80
+#define BCM281XX_PIN_MDMGPIO0		81
+#define BCM281XX_PIN_MDMGPIO1		82
+#define BCM281XX_PIN_MDMGPIO2		83
+#define BCM281XX_PIN_MDMGPIO3		84
+#define BCM281XX_PIN_MDMGPIO4		85
+#define BCM281XX_PIN_MDMGPIO5		86
+#define BCM281XX_PIN_MDMGPIO6		87
+#define BCM281XX_PIN_MDMGPIO7		88
+#define BCM281XX_PIN_MDMGPIO8		89
+#define BCM281XX_PIN_MPHI_DATA_0	90
+#define BCM281XX_PIN_MPHI_DATA_1	91
+#define BCM281XX_PIN_MPHI_DATA_2	92
+#define BCM281XX_PIN_MPHI_DATA_3	93
+#define BCM281XX_PIN_MPHI_DATA_4	94
+#define BCM281XX_PIN_MPHI_DATA_5	95
+#define BCM281XX_PIN_MPHI_DATA_6	96
+#define BCM281XX_PIN_MPHI_DATA_7	97
+#define BCM281XX_PIN_MPHI_DATA_8	98
+#define BCM281XX_PIN_MPHI_DATA_9	99
+#define BCM281XX_PIN_MPHI_DATA_10	100
+#define BCM281XX_PIN_MPHI_DATA_11	101
+#define BCM281XX_PIN_MPHI_DATA_12	102
+#define BCM281XX_PIN_MPHI_DATA_13	103
+#define BCM281XX_PIN_MPHI_DATA_14	104
+#define BCM281XX_PIN_MPHI_DATA_15	105
+#define BCM281XX_PIN_MPHI_HA0		106
+#define BCM281XX_PIN_MPHI_HAT0		107
+#define BCM281XX_PIN_MPHI_HAT1		108
+#define BCM281XX_PIN_MPHI_HCE0_N	109
+#define BCM281XX_PIN_MPHI_HCE1_N	110
+#define BCM281XX_PIN_MPHI_HRD_N		111
+#define BCM281XX_PIN_MPHI_HWR_N		112
+#define BCM281XX_PIN_MPHI_RUN0		113
+#define BCM281XX_PIN_MPHI_RUN1		114
+#define BCM281XX_PIN_MTX_SCAN_CLK	115
+#define BCM281XX_PIN_MTX_SCAN_DATA	116
+#define BCM281XX_PIN_NAND_AD_0		117
+#define BCM281XX_PIN_NAND_AD_1		118
+#define BCM281XX_PIN_NAND_AD_2		119
+#define BCM281XX_PIN_NAND_AD_3		120
+#define BCM281XX_PIN_NAND_AD_4		121
+#define BCM281XX_PIN_NAND_AD_5		122
+#define BCM281XX_PIN_NAND_AD_6		123
+#define BCM281XX_PIN_NAND_AD_7		124
+#define BCM281XX_PIN_NAND_ALE		125
+#define BCM281XX_PIN_NAND_CEN_0		126
+#define BCM281XX_PIN_NAND_CEN_1		127
+#define BCM281XX_PIN_NAND_CLE		128
+#define BCM281XX_PIN_NAND_OEN		129
+#define BCM281XX_PIN_NAND_RDY_0		130
+#define BCM281XX_PIN_NAND_RDY_1		131
+#define BCM281XX_PIN_NAND_WEN		132
+#define BCM281XX_PIN_NAND_WP		133
+#define BCM281XX_PIN_PC1		134
+#define BCM281XX_PIN_PC2		135
+#define BCM281XX_PIN_PMU_INT		136
+#define BCM281XX_PIN_PMU_SCL		137
+#define BCM281XX_PIN_PMU_SDA		138
+#define BCM281XX_PIN_RFST2G_MTSLOTEN3G	139
+#define BCM281XX_PIN_RGMII_0_RX_CTL	140
+#define BCM281XX_PIN_RGMII_0_RXC	141
+#define BCM281XX_PIN_RGMII_0_RXD_0	142
+#define BCM281XX_PIN_RGMII_0_RXD_1	143
+#define BCM281XX_PIN_RGMII_0_RXD_2	144
+#define BCM281XX_PIN_RGMII_0_RXD_3	145
+#define BCM281XX_PIN_RGMII_0_TX_CTL	146
+#define BCM281XX_PIN_RGMII_0_TXC	147
+#define BCM281XX_PIN_RGMII_0_TXD_0	148
+#define BCM281XX_PIN_RGMII_0_TXD_1	149
+#define BCM281XX_PIN_RGMII_0_TXD_2	150
+#define BCM281XX_PIN_RGMII_0_TXD_3	151
+#define BCM281XX_PIN_RGMII_1_RX_CTL	152
+#define BCM281XX_PIN_RGMII_1_RXC	153
+#define BCM281XX_PIN_RGMII_1_RXD_0	154
+#define BCM281XX_PIN_RGMII_1_RXD_1	155
+#define BCM281XX_PIN_RGMII_1_RXD_2	156
+#define BCM281XX_PIN_RGMII_1_RXD_3	157
+#define BCM281XX_PIN_RGMII_1_TX_CTL	158
+#define BCM281XX_PIN_RGMII_1_TXC	159
+#define BCM281XX_PIN_RGMII_1_TXD_0	160
+#define BCM281XX_PIN_RGMII_1_TXD_1	161
+#define BCM281XX_PIN_RGMII_1_TXD_2	162
+#define BCM281XX_PIN_RGMII_1_TXD_3	163
+#define BCM281XX_PIN_RGMII_GPIO_0	164
+#define BCM281XX_PIN_RGMII_GPIO_1	165
+#define BCM281XX_PIN_RGMII_GPIO_2	166
+#define BCM281XX_PIN_RGMII_GPIO_3	167
+#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1	168
+#define BCM281XX_PIN_RTXEN2G_TXDATA3G2	169
+#define BCM281XX_PIN_RXDATA3G0		170
+#define BCM281XX_PIN_RXDATA3G1		171
+#define BCM281XX_PIN_RXDATA3G2		172
+#define BCM281XX_PIN_SDIO1_CLK		173
+#define BCM281XX_PIN_SDIO1_CMD		174
+#define BCM281XX_PIN_SDIO1_DATA_0	175
+#define BCM281XX_PIN_SDIO1_DATA_1	176
+#define BCM281XX_PIN_SDIO1_DATA_2	177
+#define BCM281XX_PIN_SDIO1_DATA_3	178
+#define BCM281XX_PIN_SDIO4_CLK		179
+#define BCM281XX_PIN_SDIO4_CMD		180
+#define BCM281XX_PIN_SDIO4_DATA_0	181
+#define BCM281XX_PIN_SDIO4_DATA_1	182
+#define BCM281XX_PIN_SDIO4_DATA_2	183
+#define BCM281XX_PIN_SDIO4_DATA_3	184
+#define BCM281XX_PIN_SIM_CLK		185
+#define BCM281XX_PIN_SIM_DATA		186
+#define BCM281XX_PIN_SIM_DET		187
+#define BCM281XX_PIN_SIM_RESETN		188
+#define BCM281XX_PIN_SIM2_CLK		189
+#define BCM281XX_PIN_SIM2_DATA		190
+#define BCM281XX_PIN_SIM2_DET		191
+#define BCM281XX_PIN_SIM2_RESETN	192
+#define BCM281XX_PIN_SRI_C		193
+#define BCM281XX_PIN_SRI_D		194
+#define BCM281XX_PIN_SRI_E		195
+#define BCM281XX_PIN_SSP_EXTCLK		196
+#define BCM281XX_PIN_SSP0_CLK		197
+#define BCM281XX_PIN_SSP0_FS		198
+#define BCM281XX_PIN_SSP0_RXD		199
+#define BCM281XX_PIN_SSP0_TXD		200
+#define BCM281XX_PIN_SSP2_CLK		201
+#define BCM281XX_PIN_SSP2_FS_0		202
+#define BCM281XX_PIN_SSP2_FS_1		203
+#define BCM281XX_PIN_SSP2_FS_2		204
+#define BCM281XX_PIN_SSP2_FS_3		205
+#define BCM281XX_PIN_SSP2_RXD_0		206
+#define BCM281XX_PIN_SSP2_RXD_1		207
+#define BCM281XX_PIN_SSP2_TXD_0		208
+#define BCM281XX_PIN_SSP2_TXD_1		209
+#define BCM281XX_PIN_SSP3_CLK		210
+#define BCM281XX_PIN_SSP3_FS		211
+#define BCM281XX_PIN_SSP3_RXD		212
+#define BCM281XX_PIN_SSP3_TXD		213
+#define BCM281XX_PIN_SSP4_CLK		214
+#define BCM281XX_PIN_SSP4_FS		215
+#define BCM281XX_PIN_SSP4_RXD		216
+#define BCM281XX_PIN_SSP4_TXD		217
+#define BCM281XX_PIN_SSP5_CLK		218
+#define BCM281XX_PIN_SSP5_FS		219
+#define BCM281XX_PIN_SSP5_RXD		220
+#define BCM281XX_PIN_SSP5_TXD		221
+#define BCM281XX_PIN_SSP6_CLK		222
+#define BCM281XX_PIN_SSP6_FS		223
+#define BCM281XX_PIN_SSP6_RXD		224
+#define BCM281XX_PIN_SSP6_TXD		225
+#define BCM281XX_PIN_STAT_1		226
+#define BCM281XX_PIN_STAT_2		227
+#define BCM281XX_PIN_SYSCLKEN		228
+#define BCM281XX_PIN_TRACECLK		229
+#define BCM281XX_PIN_TRACEDT00		230
+#define BCM281XX_PIN_TRACEDT01		231
+#define BCM281XX_PIN_TRACEDT02		232
+#define BCM281XX_PIN_TRACEDT03		233
+#define BCM281XX_PIN_TRACEDT04		234
+#define BCM281XX_PIN_TRACEDT05		235
+#define BCM281XX_PIN_TRACEDT06		236
+#define BCM281XX_PIN_TRACEDT07		237
+#define BCM281XX_PIN_TRACEDT08		238
+#define BCM281XX_PIN_TRACEDT09		239
+#define BCM281XX_PIN_TRACEDT10		240
+#define BCM281XX_PIN_TRACEDT11		241
+#define BCM281XX_PIN_TRACEDT12		242
+#define BCM281XX_PIN_TRACEDT13		243
+#define BCM281XX_PIN_TRACEDT14		244
+#define BCM281XX_PIN_TRACEDT15		245
+#define BCM281XX_PIN_TXDATA3G0		246
+#define BCM281XX_PIN_TXPWRIND		247
+#define BCM281XX_PIN_UARTB1_UCTS	248
+#define BCM281XX_PIN_UARTB1_URTS	249
+#define BCM281XX_PIN_UARTB1_URXD	250
+#define BCM281XX_PIN_UARTB1_UTXD	251
+#define BCM281XX_PIN_UARTB2_URXD	252
+#define BCM281XX_PIN_UARTB2_UTXD	253
+#define BCM281XX_PIN_UARTB3_UCTS	254
+#define BCM281XX_PIN_UARTB3_URTS	255
+#define BCM281XX_PIN_UARTB3_URXD	256
+#define BCM281XX_PIN_UARTB3_UTXD	257
+#define BCM281XX_PIN_UARTB4_UCTS	258
+#define BCM281XX_PIN_UARTB4_URTS	259
+#define BCM281XX_PIN_UARTB4_URXD	260
+#define BCM281XX_PIN_UARTB4_UTXD	261
+#define BCM281XX_PIN_VC_CAM1_SCL	262
+#define BCM281XX_PIN_VC_CAM1_SDA	263
+#define BCM281XX_PIN_VC_CAM2_SCL	264
+#define BCM281XX_PIN_VC_CAM2_SDA	265
+#define BCM281XX_PIN_VC_CAM3_SCL	266
+#define BCM281XX_PIN_VC_CAM3_SDA	267
+
+#define BCM281XX_PIN_DESC(a, b, c) \
+	{ .number = a, .name = b, .drv_data = &c##_pin }
+
+/*
+ * Pin description definition.  The order here must be the same as defined in
+ * the PADCTRLREG block in the RDB, since the pin number is used as an index
+ * into this array.
+ */
+static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
+	BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
+		"rtxdata2g_txdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
+};
+
+static const char * const bcm281xx_alt_groups[] = {
+	"adcsync",
+	"bat_rm",
+	"bsc1_scl",
+	"bsc1_sda",
+	"bsc2_scl",
+	"bsc2_sda",
+	"classgpwr",
+	"clk_cx8",
+	"clkout_0",
+	"clkout_1",
+	"clkout_2",
+	"clkout_3",
+	"clkreq_in_0",
+	"clkreq_in_1",
+	"cws_sys_req1",
+	"cws_sys_req2",
+	"cws_sys_req3",
+	"digmic1_clk",
+	"digmic1_dq",
+	"digmic2_clk",
+	"digmic2_dq",
+	"gpen13",
+	"gpen14",
+	"gpen15",
+	"gpio00",
+	"gpio01",
+	"gpio02",
+	"gpio03",
+	"gpio04",
+	"gpio05",
+	"gpio06",
+	"gpio07",
+	"gpio08",
+	"gpio09",
+	"gpio10",
+	"gpio11",
+	"gpio12",
+	"gpio13",
+	"gpio14",
+	"gps_pablank",
+	"gps_tmark",
+	"hdmi_scl",
+	"hdmi_sda",
+	"ic_dm",
+	"ic_dp",
+	"kp_col_ip_0",
+	"kp_col_ip_1",
+	"kp_col_ip_2",
+	"kp_col_ip_3",
+	"kp_row_op_0",
+	"kp_row_op_1",
+	"kp_row_op_2",
+	"kp_row_op_3",
+	"lcd_b_0",
+	"lcd_b_1",
+	"lcd_b_2",
+	"lcd_b_3",
+	"lcd_b_4",
+	"lcd_b_5",
+	"lcd_b_6",
+	"lcd_b_7",
+	"lcd_g_0",
+	"lcd_g_1",
+	"lcd_g_2",
+	"lcd_g_3",
+	"lcd_g_4",
+	"lcd_g_5",
+	"lcd_g_6",
+	"lcd_g_7",
+	"lcd_hsync",
+	"lcd_oe",
+	"lcd_pclk",
+	"lcd_r_0",
+	"lcd_r_1",
+	"lcd_r_2",
+	"lcd_r_3",
+	"lcd_r_4",
+	"lcd_r_5",
+	"lcd_r_6",
+	"lcd_r_7",
+	"lcd_vsync",
+	"mdmgpio0",
+	"mdmgpio1",
+	"mdmgpio2",
+	"mdmgpio3",
+	"mdmgpio4",
+	"mdmgpio5",
+	"mdmgpio6",
+	"mdmgpio7",
+	"mdmgpio8",
+	"mphi_data_0",
+	"mphi_data_1",
+	"mphi_data_2",
+	"mphi_data_3",
+	"mphi_data_4",
+	"mphi_data_5",
+	"mphi_data_6",
+	"mphi_data_7",
+	"mphi_data_8",
+	"mphi_data_9",
+	"mphi_data_10",
+	"mphi_data_11",
+	"mphi_data_12",
+	"mphi_data_13",
+	"mphi_data_14",
+	"mphi_data_15",
+	"mphi_ha0",
+	"mphi_hat0",
+	"mphi_hat1",
+	"mphi_hce0_n",
+	"mphi_hce1_n",
+	"mphi_hrd_n",
+	"mphi_hwr_n",
+	"mphi_run0",
+	"mphi_run1",
+	"mtx_scan_clk",
+	"mtx_scan_data",
+	"nand_ad_0",
+	"nand_ad_1",
+	"nand_ad_2",
+	"nand_ad_3",
+	"nand_ad_4",
+	"nand_ad_5",
+	"nand_ad_6",
+	"nand_ad_7",
+	"nand_ale",
+	"nand_cen_0",
+	"nand_cen_1",
+	"nand_cle",
+	"nand_oen",
+	"nand_rdy_0",
+	"nand_rdy_1",
+	"nand_wen",
+	"nand_wp",
+	"pc1",
+	"pc2",
+	"pmu_int",
+	"pmu_scl",
+	"pmu_sda",
+	"rfst2g_mtsloten3g",
+	"rgmii_0_rx_ctl",
+	"rgmii_0_rxc",
+	"rgmii_0_rxd_0",
+	"rgmii_0_rxd_1",
+	"rgmii_0_rxd_2",
+	"rgmii_0_rxd_3",
+	"rgmii_0_tx_ctl",
+	"rgmii_0_txc",
+	"rgmii_0_txd_0",
+	"rgmii_0_txd_1",
+	"rgmii_0_txd_2",
+	"rgmii_0_txd_3",
+	"rgmii_1_rx_ctl",
+	"rgmii_1_rxc",
+	"rgmii_1_rxd_0",
+	"rgmii_1_rxd_1",
+	"rgmii_1_rxd_2",
+	"rgmii_1_rxd_3",
+	"rgmii_1_tx_ctl",
+	"rgmii_1_txc",
+	"rgmii_1_txd_0",
+	"rgmii_1_txd_1",
+	"rgmii_1_txd_2",
+	"rgmii_1_txd_3",
+	"rgmii_gpio_0",
+	"rgmii_gpio_1",
+	"rgmii_gpio_2",
+	"rgmii_gpio_3",
+	"rtxdata2g_txdata3g1",
+	"rtxen2g_txdata3g2",
+	"rxdata3g0",
+	"rxdata3g1",
+	"rxdata3g2",
+	"sdio1_clk",
+	"sdio1_cmd",
+	"sdio1_data_0",
+	"sdio1_data_1",
+	"sdio1_data_2",
+	"sdio1_data_3",
+	"sdio4_clk",
+	"sdio4_cmd",
+	"sdio4_data_0",
+	"sdio4_data_1",
+	"sdio4_data_2",
+	"sdio4_data_3",
+	"sim_clk",
+	"sim_data",
+	"sim_det",
+	"sim_resetn",
+	"sim2_clk",
+	"sim2_data",
+	"sim2_det",
+	"sim2_resetn",
+	"sri_c",
+	"sri_d",
+	"sri_e",
+	"ssp_extclk",
+	"ssp0_clk",
+	"ssp0_fs",
+	"ssp0_rxd",
+	"ssp0_txd",
+	"ssp2_clk",
+	"ssp2_fs_0",
+	"ssp2_fs_1",
+	"ssp2_fs_2",
+	"ssp2_fs_3",
+	"ssp2_rxd_0",
+	"ssp2_rxd_1",
+	"ssp2_txd_0",
+	"ssp2_txd_1",
+	"ssp3_clk",
+	"ssp3_fs",
+	"ssp3_rxd",
+	"ssp3_txd",
+	"ssp4_clk",
+	"ssp4_fs",
+	"ssp4_rxd",
+	"ssp4_txd",
+	"ssp5_clk",
+	"ssp5_fs",
+	"ssp5_rxd",
+	"ssp5_txd",
+	"ssp6_clk",
+	"ssp6_fs",
+	"ssp6_rxd",
+	"ssp6_txd",
+	"stat_1",
+	"stat_2",
+	"sysclken",
+	"traceclk",
+	"tracedt00",
+	"tracedt01",
+	"tracedt02",
+	"tracedt03",
+	"tracedt04",
+	"tracedt05",
+	"tracedt06",
+	"tracedt07",
+	"tracedt08",
+	"tracedt09",
+	"tracedt10",
+	"tracedt11",
+	"tracedt12",
+	"tracedt13",
+	"tracedt14",
+	"tracedt15",
+	"txdata3g0",
+	"txpwrind",
+	"uartb1_ucts",
+	"uartb1_urts",
+	"uartb1_urxd",
+	"uartb1_utxd",
+	"uartb2_urxd",
+	"uartb2_utxd",
+	"uartb3_ucts",
+	"uartb3_urts",
+	"uartb3_urxd",
+	"uartb3_utxd",
+	"uartb4_ucts",
+	"uartb4_urts",
+	"uartb4_urxd",
+	"uartb4_utxd",
+	"vc_cam1_scl",
+	"vc_cam1_sda",
+	"vc_cam2_scl",
+	"vc_cam2_sda",
+	"vc_cam3_scl",
+	"vc_cam3_sda",
+};
+
+/* Every pin can implement all ALT1-ALT4 functions */
+#define BCM281XX_PIN_FUNCTION(fcn_name)			\
+{							\
+	.name = #fcn_name,				\
+	.groups = bcm281xx_alt_groups,			\
+	.ngroups = ARRAY_SIZE(bcm281xx_alt_groups),	\
+}
+
+static const struct bcm281xx_pin_function bcm281xx_functions[] = {
+	BCM281XX_PIN_FUNCTION(alt1),
+	BCM281XX_PIN_FUNCTION(alt2),
+	BCM281XX_PIN_FUNCTION(alt3),
+	BCM281XX_PIN_FUNCTION(alt4),
+};
+
+static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
+	.pins = bcm281xx_pinctrl_pins,
+	.npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
+	.functions = bcm281xx_functions,
+	.nfunctions = ARRAY_SIZE(bcm281xx_functions),
+};
+
+static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
+						  unsigned pin)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= pdata->npins)
+		return BCM281XX_PIN_TYPE_UNKNOWN;
+
+	return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
+}
+
+#define BCM281XX_PIN_SHIFT(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
+
+#define BCM281XX_PIN_MASK(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
+
+/*
+ * This helper function is used to build up the value and mask used to write to
+ * a pin register, but does not actually write to the register.
+ */
+static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
+				       u32 param_val, u32 param_shift,
+				       u32 param_mask)
+{
+	*reg_val &= ~param_mask;
+	*reg_val |= (param_val << param_shift) & param_mask;
+	*reg_mask |= param_mask;
+}
+
+static const struct regmap_config bcm281xx_pinctrl_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = BCM281XX_PIN_VC_CAM3_SDA,
+};
+
+static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->npins;
+}
+
+static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						   unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->pins[group].name;
+}
+
+static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					   unsigned group,
+					   const unsigned **pins,
+					   unsigned *num_pins)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = &pdata->pins[group].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					  struct seq_file *s,
+					  unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static const struct pinctrl_ops bcm281xx_pinctrl_ops = {
+	.get_groups_count = bcm281xx_pinctrl_get_groups_count,
+	.get_group_name = bcm281xx_pinctrl_get_group_name,
+	.get_group_pins = bcm281xx_pinctrl_get_group_pins,
+	.pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->nfunctions;
+}
+
+static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
+						 unsigned function)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->functions[function].name;
+}
+
+static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
+					   unsigned function,
+					   const char * const **groups,
+					   unsigned * const num_groups)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pdata->functions[function].groups;
+	*num_groups = pdata->functions[function].ngroups;
+
+	return 0;
+}
+
+static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
+			       unsigned function,
+			       unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	const struct bcm281xx_pin_function *f = &pdata->functions[function];
+	u32 offset = 4 * pdata->pins[group].number;
+	int rc = 0;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
+		__func__, f->name, function, pdata->pins[group].name,
+		pdata->pins[group].number, offset);
+
+	rc = regmap_update_bits(pdata->regmap, offset,
+		BCM281XX_PIN_REG_F_SEL_MASK,
+		function << BCM281XX_PIN_REG_F_SEL_SHIFT);
+	if (rc)
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[group].name, pdata->pins[group].number);
+
+	return rc;
+}
+
+static const struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
+	.get_functions_count = bcm281xx_pinctrl_get_fcns_count,
+	.get_function_name = bcm281xx_pinctrl_get_fcn_name,
+	.get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
+	.set_mux = bcm281xx_pinmux_set,
+};
+
+static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *config)
+{
+	return -ENOTSUPP;
+}
+
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u32 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, HYST),
+				BCM281XX_PIN_MASK(STD, HYST));
+			break;
+		/*
+		 * The pin bias can only be one of pull-up, pull-down, or
+		 * disable.  The user does not need to specify a value for the
+		 * property, and the default value from pinconf-generic is
+		 * ignored.
+		 */
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, SLEW),
+				BCM281XX_PIN_MASK(STD, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
+				BCM281XX_PIN_MASK(STD, INPUT_DIS));
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			/* Valid range is 2-16 mA, even numbers only */
+			if ((arg < 2) || (arg > 16) || (arg % 2)) {
+				dev_err(pctldev->dev,
+					"Invalid Drive Strength value (%d) for "
+					"pin %s (%d). Valid values are "
+					"(2..16) mA, even numbers only.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+			bcm281xx_pin_update(val, mask, (arg/2)-1,
+				BCM281XX_PIN_SHIFT(STD, DRV_STR),
+				BCM281XX_PIN_MASK(STD, DRV_STR));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/*
+ * The pull-up strength for an I2C pin is represented by bits 4-6 in the
+ * register with the following mapping:
+ *   0b000: No pull-up
+ *   0b001: 1200 Ohm
+ *   0b010: 1800 Ohm
+ *   0b011: 720 Ohm
+ *   0b100: 2700 Ohm
+ *   0b101: 831 Ohm
+ *   0b110: 1080 Ohm
+ *   0b111: 568 Ohm
+ * This array maps pull-up strength in Ohms to register values (1+index).
+ */
+static const u16 bcm281xx_pullup_map[] = {
+	1200, 1800, 720, 2700, 831, 1080, 568
+};
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i, j;
+	enum pin_config_param param;
+	u32 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
+				if (bcm281xx_pullup_map[j] == arg)
+					break;
+
+			if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
+				dev_err(pctldev->dev,
+					"Invalid pull-up value (%d) for pin %s "
+					"(%d). Valid values are 568, 720, 831, "
+					"1080, 1200, 1800, 2700 Ohms.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+
+			bcm281xx_pin_update(val, mask, j+1,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, SLEW),
+				BCM281XX_PIN_MASK(I2C, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
+				BCM281XX_PIN_MASK(I2C, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
+				    unsigned pin,
+				    unsigned long *configs,
+				    unsigned num_configs,
+				    u32 *val,
+				    u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u32 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, MODE),
+				BCM281XX_PIN_MASK(HDMI, MODE));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
+				BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *configs,
+					   unsigned num_configs)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	enum bcm281xx_pin_type pin_type;
+	u32 offset = 4 * pin;
+	u32 cfg_val, cfg_mask;
+	int rc;
+
+	cfg_val = 0;
+	cfg_mask = 0;
+	pin_type = pin_type_get(pctldev, pin);
+
+	/* Different pins have different configuration options */
+	switch (pin_type) {
+	case BCM281XX_PIN_TYPE_STD:
+		rc = bcm281xx_std_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_I2C:
+		rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_HDMI:
+		rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return -EINVAL;
+
+	} /* switch pin type */
+
+	if (rc)
+		return rc;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
+		__func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
+
+	rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
+	if (rc) {
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return rc;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
+	.pin_config_get = bcm281xx_pinctrl_pin_config_get,
+	.pin_config_set = bcm281xx_pinctrl_pin_config_set,
+};
+
+static struct pinctrl_desc bcm281xx_pinctrl_desc = {
+	/* name, pins, npins members initialized in probe function */
+	.pctlops = &bcm281xx_pinctrl_ops,
+	.pmxops = &bcm281xx_pinctrl_pinmux_ops,
+	.confops = &bcm281xx_pinctrl_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
+{
+	struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
+	struct resource *res;
+	struct pinctrl_dev *pctl;
+
+	/* So far We can assume there is only 1 bank of registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->reg_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
+		return -ENODEV;
+	}
+
+	/* Initialize the dynamic part of pinctrl_desc */
+	pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
+		&bcm281xx_pinctrl_regmap_config);
+	if (IS_ERR(pdata->regmap)) {
+		dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
+		return -ENODEV;
+	}
+
+	bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
+	bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
+	bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
+
+	pctl = devm_pinctrl_register(&pdev->dev, &bcm281xx_pinctrl_desc, pdata);
+	if (IS_ERR(pctl)) {
+		dev_err(&pdev->dev, "Failed to register pinctrl\n");
+		return PTR_ERR(pctl);
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	return 0;
+}
+
+static const struct of_device_id bcm281xx_pinctrl_of_match[] = {
+	{ .compatible = "brcm,bcm11351-pinctrl", },
+	{ },
+};
+
+static struct platform_driver bcm281xx_pinctrl_driver = {
+	.driver = {
+		.name = "bcm281xx-pinctrl",
+		.of_match_table = bcm281xx_pinctrl_of_match,
+	},
+};
+builtin_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm2835.c
new file mode 100644
index 0000000..e72bf25
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -0,0 +1,1086 @@
+/*
+ * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
+ *
+ * This driver is inspired by:
+ * pinctrl-nomadik.c, please see original file for copyright information
+ * pinctrl-tegra.c, please see original file for copyright information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define MODULE_NAME "pinctrl-bcm2835"
+#define BCM2835_NUM_GPIOS 54
+#define BCM2835_NUM_BANKS 2
+#define BCM2835_NUM_IRQS  3
+
+#define BCM2835_PIN_BITMAP_SZ \
+	DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
+
+/* GPIO register offsets */
+#define GPFSEL0		0x0	/* Function Select */
+#define GPSET0		0x1c	/* Pin Output Set */
+#define GPCLR0		0x28	/* Pin Output Clear */
+#define GPLEV0		0x34	/* Pin Level */
+#define GPEDS0		0x40	/* Pin Event Detect Status */
+#define GPREN0		0x4c	/* Pin Rising Edge Detect Enable */
+#define GPFEN0		0x58	/* Pin Falling Edge Detect Enable */
+#define GPHEN0		0x64	/* Pin High Detect Enable */
+#define GPLEN0		0x70	/* Pin Low Detect Enable */
+#define GPAREN0		0x7c	/* Pin Async Rising Edge Detect */
+#define GPAFEN0		0x88	/* Pin Async Falling Edge Detect */
+#define GPPUD		0x94	/* Pin Pull-up/down Enable */
+#define GPPUDCLK0	0x98	/* Pin Pull-up/down Enable Clock */
+
+#define FSEL_REG(p)		(GPFSEL0 + (((p) / 10) * 4))
+#define FSEL_SHIFT(p)		(((p) % 10) * 3)
+#define GPIO_REG_OFFSET(p)	((p) / 32)
+#define GPIO_REG_SHIFT(p)	((p) % 32)
+
+enum bcm2835_pinconf_param {
+	/* argument: bcm2835_pinconf_pull */
+	BCM2835_PINCONF_PARAM_PULL,
+};
+
+#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
+#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
+#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
+
+struct bcm2835_pinctrl {
+	struct device *dev;
+	void __iomem *base;
+	int irq[BCM2835_NUM_IRQS];
+
+	/* note: locking assumes each bank will have its own unsigned long */
+	unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
+	unsigned int irq_type[BCM2835_NUM_GPIOS];
+
+	struct pinctrl_dev *pctl_dev;
+	struct gpio_chip gpio_chip;
+	struct pinctrl_gpio_range gpio_range;
+
+	raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
+};
+
+/* pins are just named GPIO0..GPIO53 */
+#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
+static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
+	BCM2835_GPIO_PIN(0),
+	BCM2835_GPIO_PIN(1),
+	BCM2835_GPIO_PIN(2),
+	BCM2835_GPIO_PIN(3),
+	BCM2835_GPIO_PIN(4),
+	BCM2835_GPIO_PIN(5),
+	BCM2835_GPIO_PIN(6),
+	BCM2835_GPIO_PIN(7),
+	BCM2835_GPIO_PIN(8),
+	BCM2835_GPIO_PIN(9),
+	BCM2835_GPIO_PIN(10),
+	BCM2835_GPIO_PIN(11),
+	BCM2835_GPIO_PIN(12),
+	BCM2835_GPIO_PIN(13),
+	BCM2835_GPIO_PIN(14),
+	BCM2835_GPIO_PIN(15),
+	BCM2835_GPIO_PIN(16),
+	BCM2835_GPIO_PIN(17),
+	BCM2835_GPIO_PIN(18),
+	BCM2835_GPIO_PIN(19),
+	BCM2835_GPIO_PIN(20),
+	BCM2835_GPIO_PIN(21),
+	BCM2835_GPIO_PIN(22),
+	BCM2835_GPIO_PIN(23),
+	BCM2835_GPIO_PIN(24),
+	BCM2835_GPIO_PIN(25),
+	BCM2835_GPIO_PIN(26),
+	BCM2835_GPIO_PIN(27),
+	BCM2835_GPIO_PIN(28),
+	BCM2835_GPIO_PIN(29),
+	BCM2835_GPIO_PIN(30),
+	BCM2835_GPIO_PIN(31),
+	BCM2835_GPIO_PIN(32),
+	BCM2835_GPIO_PIN(33),
+	BCM2835_GPIO_PIN(34),
+	BCM2835_GPIO_PIN(35),
+	BCM2835_GPIO_PIN(36),
+	BCM2835_GPIO_PIN(37),
+	BCM2835_GPIO_PIN(38),
+	BCM2835_GPIO_PIN(39),
+	BCM2835_GPIO_PIN(40),
+	BCM2835_GPIO_PIN(41),
+	BCM2835_GPIO_PIN(42),
+	BCM2835_GPIO_PIN(43),
+	BCM2835_GPIO_PIN(44),
+	BCM2835_GPIO_PIN(45),
+	BCM2835_GPIO_PIN(46),
+	BCM2835_GPIO_PIN(47),
+	BCM2835_GPIO_PIN(48),
+	BCM2835_GPIO_PIN(49),
+	BCM2835_GPIO_PIN(50),
+	BCM2835_GPIO_PIN(51),
+	BCM2835_GPIO_PIN(52),
+	BCM2835_GPIO_PIN(53),
+};
+
+/* one pin per group */
+static const char * const bcm2835_gpio_groups[] = {
+	"gpio0",
+	"gpio1",
+	"gpio2",
+	"gpio3",
+	"gpio4",
+	"gpio5",
+	"gpio6",
+	"gpio7",
+	"gpio8",
+	"gpio9",
+	"gpio10",
+	"gpio11",
+	"gpio12",
+	"gpio13",
+	"gpio14",
+	"gpio15",
+	"gpio16",
+	"gpio17",
+	"gpio18",
+	"gpio19",
+	"gpio20",
+	"gpio21",
+	"gpio22",
+	"gpio23",
+	"gpio24",
+	"gpio25",
+	"gpio26",
+	"gpio27",
+	"gpio28",
+	"gpio29",
+	"gpio30",
+	"gpio31",
+	"gpio32",
+	"gpio33",
+	"gpio34",
+	"gpio35",
+	"gpio36",
+	"gpio37",
+	"gpio38",
+	"gpio39",
+	"gpio40",
+	"gpio41",
+	"gpio42",
+	"gpio43",
+	"gpio44",
+	"gpio45",
+	"gpio46",
+	"gpio47",
+	"gpio48",
+	"gpio49",
+	"gpio50",
+	"gpio51",
+	"gpio52",
+	"gpio53",
+};
+
+enum bcm2835_fsel {
+	BCM2835_FSEL_GPIO_IN = 0,
+	BCM2835_FSEL_GPIO_OUT = 1,
+	BCM2835_FSEL_ALT0 = 4,
+	BCM2835_FSEL_ALT1 = 5,
+	BCM2835_FSEL_ALT2 = 6,
+	BCM2835_FSEL_ALT3 = 7,
+	BCM2835_FSEL_ALT4 = 3,
+	BCM2835_FSEL_ALT5 = 2,
+	BCM2835_FSEL_COUNT = 8,
+	BCM2835_FSEL_MASK = 0x7,
+};
+
+static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
+	[BCM2835_FSEL_GPIO_IN] = "gpio_in",
+	[BCM2835_FSEL_GPIO_OUT] = "gpio_out",
+	[BCM2835_FSEL_ALT0] = "alt0",
+	[BCM2835_FSEL_ALT1] = "alt1",
+	[BCM2835_FSEL_ALT2] = "alt2",
+	[BCM2835_FSEL_ALT3] = "alt3",
+	[BCM2835_FSEL_ALT4] = "alt4",
+	[BCM2835_FSEL_ALT5] = "alt5",
+};
+
+static const char * const irq_type_names[] = {
+	[IRQ_TYPE_NONE] = "none",
+	[IRQ_TYPE_EDGE_RISING] = "edge-rising",
+	[IRQ_TYPE_EDGE_FALLING] = "edge-falling",
+	[IRQ_TYPE_EDGE_BOTH] = "edge-both",
+	[IRQ_TYPE_LEVEL_HIGH] = "level-high",
+	[IRQ_TYPE_LEVEL_LOW] = "level-low",
+};
+
+static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
+{
+	return readl(pc->base + reg);
+}
+
+static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
+		u32 val)
+{
+	writel(val, pc->base + reg);
+}
+
+static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
+		unsigned bit)
+{
+	reg += GPIO_REG_OFFSET(bit) * 4;
+	return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
+}
+
+/* note NOT a read/modify/write cycle */
+static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
+		unsigned reg, unsigned bit)
+{
+	reg += GPIO_REG_OFFSET(bit) * 4;
+	bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
+}
+
+static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
+		struct bcm2835_pinctrl *pc, unsigned pin)
+{
+	u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+	enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+	dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
+			bcm2835_functions[status]);
+
+	return status;
+}
+
+static inline void bcm2835_pinctrl_fsel_set(
+		struct bcm2835_pinctrl *pc, unsigned pin,
+		enum bcm2835_fsel fsel)
+{
+	u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+	enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+	dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
+			bcm2835_functions[cur]);
+
+	if (cur == fsel)
+		return;
+
+	if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
+		/* always transition through GPIO_IN */
+		val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+		val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
+
+		dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
+				bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
+		bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+	}
+
+	val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+	val |= fsel << FSEL_SHIFT(pin);
+
+	dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
+			bcm2835_functions[fsel]);
+	bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+}
+
+static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+
+	return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+}
+
+static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
+
+	/* Alternative function doesn't clearly provide a direction */
+	if (fsel > BCM2835_FSEL_GPIO_OUT)
+		return -EINVAL;
+
+	return (fsel == BCM2835_FSEL_GPIO_IN);
+}
+
+static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+
+	bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
+}
+
+static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	bcm2835_gpio_set(chip, offset, value);
+	return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static const struct gpio_chip bcm2835_gpio_chip = {
+	.label = MODULE_NAME,
+	.owner = THIS_MODULE,
+	.request = gpiochip_generic_request,
+	.free = gpiochip_generic_free,
+	.direction_input = bcm2835_gpio_direction_input,
+	.direction_output = bcm2835_gpio_direction_output,
+	.get_direction = bcm2835_gpio_get_direction,
+	.get = bcm2835_gpio_get,
+	.set = bcm2835_gpio_set,
+	.base = -1,
+	.ngpio = BCM2835_NUM_GPIOS,
+	.can_sleep = false,
+};
+
+static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
+					 unsigned int bank, u32 mask)
+{
+	unsigned long events;
+	unsigned offset;
+	unsigned gpio;
+
+	events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+	events &= mask;
+	events &= pc->enabled_irq_map[bank];
+	for_each_set_bit(offset, &events, 32) {
+		gpio = (32 * bank) + offset;
+		generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irqdomain,
+						     gpio));
+	}
+}
+
+static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	struct irq_chip *host_chip = irq_desc_get_chip(desc);
+	int irq = irq_desc_get_irq(desc);
+	int group;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
+		if (pc->irq[i] == irq) {
+			group = i;
+			break;
+		}
+	}
+	/* This should not happen, every IRQ has a bank */
+	if (i == ARRAY_SIZE(pc->irq))
+		BUG();
+
+	chained_irq_enter(host_chip, desc);
+
+	switch (group) {
+	case 0: /* IRQ0 covers GPIOs 0-27 */
+		bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
+		break;
+	case 1: /* IRQ1 covers GPIOs 28-45 */
+		bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
+		bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
+		break;
+	case 2: /* IRQ2 covers GPIOs 46-53 */
+		bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
+		break;
+	}
+
+	chained_irq_exit(host_chip, desc);
+}
+
+static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+	unsigned reg, unsigned offset, bool enable)
+{
+	u32 value;
+	reg += GPIO_REG_OFFSET(offset) * 4;
+	value = bcm2835_gpio_rd(pc, reg);
+	if (enable)
+		value |= BIT(GPIO_REG_SHIFT(offset));
+	else
+		value &= ~(BIT(GPIO_REG_SHIFT(offset)));
+	bcm2835_gpio_wr(pc, reg, value);
+}
+
+/* fast path for IRQ handler */
+static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+	unsigned offset, bool enable)
+{
+	switch (pc->irq_type[offset]) {
+	case IRQ_TYPE_EDGE_RISING:
+		__bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		__bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		__bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+		__bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		__bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		__bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
+		break;
+	}
+}
+
+static void bcm2835_gpio_irq_enable(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	unsigned gpio = irqd_to_hwirq(data);
+	unsigned offset = GPIO_REG_SHIFT(gpio);
+	unsigned bank = GPIO_REG_OFFSET(gpio);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+	set_bit(offset, &pc->enabled_irq_map[bank]);
+	bcm2835_gpio_irq_config(pc, gpio, true);
+	raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static void bcm2835_gpio_irq_disable(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	unsigned gpio = irqd_to_hwirq(data);
+	unsigned offset = GPIO_REG_SHIFT(gpio);
+	unsigned bank = GPIO_REG_OFFSET(gpio);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+	bcm2835_gpio_irq_config(pc, gpio, false);
+	/* Clear events that were latched prior to clearing event sources */
+	bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+	clear_bit(offset, &pc->enabled_irq_map[bank]);
+	raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
+	unsigned offset, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_NONE:
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_LEVEL_LOW:
+		pc->irq_type[offset] = type;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* slower path for reconfiguring IRQ type */
+static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
+	unsigned offset, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		if (pc->irq_type[offset] != type) {
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+		}
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+			/* RISING already enabled, disable FALLING */
+			pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+		} else if (pc->irq_type[offset] != type) {
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+			bcm2835_gpio_irq_config(pc, offset, true);
+		}
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+			/* FALLING already enabled, disable RISING */
+			pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+		} else if (pc->irq_type[offset] != type) {
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+			bcm2835_gpio_irq_config(pc, offset, true);
+		}
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
+			/* RISING already enabled, enable FALLING too */
+			pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+			bcm2835_gpio_irq_config(pc, offset, true);
+			pc->irq_type[offset] = type;
+		} else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
+			/* FALLING already enabled, enable RISING too */
+			pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+			bcm2835_gpio_irq_config(pc, offset, true);
+			pc->irq_type[offset] = type;
+		} else if (pc->irq_type[offset] != type) {
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+			bcm2835_gpio_irq_config(pc, offset, true);
+		}
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_LEVEL_LOW:
+		if (pc->irq_type[offset] != type) {
+			bcm2835_gpio_irq_config(pc, offset, false);
+			pc->irq_type[offset] = type;
+			bcm2835_gpio_irq_config(pc, offset, true);
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	unsigned gpio = irqd_to_hwirq(data);
+	unsigned offset = GPIO_REG_SHIFT(gpio);
+	unsigned bank = GPIO_REG_OFFSET(gpio);
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+
+	if (test_bit(offset, &pc->enabled_irq_map[bank]))
+		ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
+	else
+		ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(data, handle_edge_irq);
+	else
+		irq_set_handler_locked(data, handle_level_irq);
+
+	raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+
+	return ret;
+}
+
+static void bcm2835_gpio_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+	unsigned gpio = irqd_to_hwirq(data);
+
+	bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+}
+
+static struct irq_chip bcm2835_gpio_irq_chip = {
+	.name = MODULE_NAME,
+	.irq_enable = bcm2835_gpio_irq_enable,
+	.irq_disable = bcm2835_gpio_irq_disable,
+	.irq_set_type = bcm2835_gpio_irq_set_type,
+	.irq_ack = bcm2835_gpio_irq_ack,
+	.irq_mask = bcm2835_gpio_irq_disable,
+	.irq_unmask = bcm2835_gpio_irq_enable,
+};
+
+static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(bcm2835_gpio_groups);
+}
+
+static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
+		unsigned selector)
+{
+	return bcm2835_gpio_groups[selector];
+}
+
+static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+		unsigned selector,
+		const unsigned **pins,
+		unsigned *num_pins)
+{
+	*pins = &bcm2835_gpio_pins[selector].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
+		struct seq_file *s,
+		unsigned offset)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+	struct gpio_chip *chip = &pc->gpio_chip;
+	enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
+	const char *fname = bcm2835_functions[fsel];
+	int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+	int irq = irq_find_mapping(chip->irqdomain, offset);
+
+	seq_printf(s, "function %s in %s; irq %d (%s)",
+		fname, value ? "hi" : "lo",
+		irq, irq_type_names[pc->irq_type[offset]]);
+}
+
+static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+		struct pinctrl_map *maps, unsigned num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+			kfree(maps[i].data.configs.configs);
+
+	kfree(maps);
+}
+
+static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
+		struct device_node *np, u32 pin, u32 fnum,
+		struct pinctrl_map **maps)
+{
+	struct pinctrl_map *map = *maps;
+
+	if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
+		dev_err(pc->dev, "%pOF: invalid brcm,function %d\n", np, fnum);
+		return -EINVAL;
+	}
+
+	map->type = PIN_MAP_TYPE_MUX_GROUP;
+	map->data.mux.group = bcm2835_gpio_groups[pin];
+	map->data.mux.function = bcm2835_functions[fnum];
+	(*maps)++;
+
+	return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
+		struct device_node *np, u32 pin, u32 pull,
+		struct pinctrl_map **maps)
+{
+	struct pinctrl_map *map = *maps;
+	unsigned long *configs;
+
+	if (pull > 2) {
+		dev_err(pc->dev, "%pOF: invalid brcm,pull %d\n", np, pull);
+		return -EINVAL;
+	}
+
+	configs = kzalloc(sizeof(*configs), GFP_KERNEL);
+	if (!configs)
+		return -ENOMEM;
+	configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
+
+	map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+	map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
+	map->data.configs.configs = configs;
+	map->data.configs.num_configs = 1;
+	(*maps)++;
+
+	return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+		struct device_node *np,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+	struct property *pins, *funcs, *pulls;
+	int num_pins, num_funcs, num_pulls, maps_per_pin;
+	struct pinctrl_map *maps, *cur_map;
+	int i, err;
+	u32 pin, func, pull;
+
+	pins = of_find_property(np, "brcm,pins", NULL);
+	if (!pins) {
+		dev_err(pc->dev, "%pOF: missing brcm,pins property\n", np);
+		return -EINVAL;
+	}
+
+	funcs = of_find_property(np, "brcm,function", NULL);
+	pulls = of_find_property(np, "brcm,pull", NULL);
+
+	if (!funcs && !pulls) {
+		dev_err(pc->dev,
+			"%pOF: neither brcm,function nor brcm,pull specified\n",
+			np);
+		return -EINVAL;
+	}
+
+	num_pins = pins->length / 4;
+	num_funcs = funcs ? (funcs->length / 4) : 0;
+	num_pulls = pulls ? (pulls->length / 4) : 0;
+
+	if (num_funcs > 1 && num_funcs != num_pins) {
+		dev_err(pc->dev,
+			"%pOF: brcm,function must have 1 or %d entries\n",
+			np, num_pins);
+		return -EINVAL;
+	}
+
+	if (num_pulls > 1 && num_pulls != num_pins) {
+		dev_err(pc->dev,
+			"%pOF: brcm,pull must have 1 or %d entries\n",
+			np, num_pins);
+		return -EINVAL;
+	}
+
+	maps_per_pin = 0;
+	if (num_funcs)
+		maps_per_pin++;
+	if (num_pulls)
+		maps_per_pin++;
+	cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
+				GFP_KERNEL);
+	if (!maps)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
+		if (err)
+			goto out;
+		if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+			dev_err(pc->dev, "%pOF: invalid brcm,pins value %d\n",
+				np, pin);
+			err = -EINVAL;
+			goto out;
+		}
+
+		if (num_funcs) {
+			err = of_property_read_u32_index(np, "brcm,function",
+					(num_funcs > 1) ? i : 0, &func);
+			if (err)
+				goto out;
+			err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
+							func, &cur_map);
+			if (err)
+				goto out;
+		}
+		if (num_pulls) {
+			err = of_property_read_u32_index(np, "brcm,pull",
+					(num_pulls > 1) ? i : 0, &pull);
+			if (err)
+				goto out;
+			err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
+							pull, &cur_map);
+			if (err)
+				goto out;
+		}
+	}
+
+	*map = maps;
+	*num_maps = num_pins * maps_per_pin;
+
+	return 0;
+
+out:
+	bcm2835_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
+	return err;
+}
+
+static const struct pinctrl_ops bcm2835_pctl_ops = {
+	.get_groups_count = bcm2835_pctl_get_groups_count,
+	.get_group_name = bcm2835_pctl_get_group_name,
+	.get_group_pins = bcm2835_pctl_get_group_pins,
+	.pin_dbg_show = bcm2835_pctl_pin_dbg_show,
+	.dt_node_to_map = bcm2835_pctl_dt_node_to_map,
+	.dt_free_map = bcm2835_pctl_dt_free_map,
+};
+
+static int bcm2835_pmx_free(struct pinctrl_dev *pctldev,
+		unsigned offset)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+	/* disable by setting to GPIO_IN */
+	bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+	return 0;
+}
+
+static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	return BCM2835_FSEL_COUNT;
+}
+
+static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
+		unsigned selector)
+{
+	return bcm2835_functions[selector];
+}
+
+static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+		unsigned selector,
+		const char * const **groups,
+		unsigned * const num_groups)
+{
+	/* every pin can do every function */
+	*groups = bcm2835_gpio_groups;
+	*num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+
+	return 0;
+}
+
+static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
+		unsigned func_selector,
+		unsigned group_selector)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+	bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
+
+	return 0;
+}
+
+static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range,
+		unsigned offset)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+	/* disable by setting to GPIO_IN */
+	bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+}
+
+static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range,
+		unsigned offset,
+		bool input)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+	enum bcm2835_fsel fsel = input ?
+		BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
+
+	bcm2835_pinctrl_fsel_set(pc, offset, fsel);
+
+	return 0;
+}
+
+static const struct pinmux_ops bcm2835_pmx_ops = {
+	.free = bcm2835_pmx_free,
+	.get_functions_count = bcm2835_pmx_get_functions_count,
+	.get_function_name = bcm2835_pmx_get_function_name,
+	.get_function_groups = bcm2835_pmx_get_function_groups,
+	.set_mux = bcm2835_pmx_set,
+	.gpio_disable_free = bcm2835_pmx_gpio_disable_free,
+	.gpio_set_direction = bcm2835_pmx_gpio_set_direction,
+};
+
+static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
+			unsigned pin, unsigned long *config)
+{
+	/* No way to read back config in HW */
+	return -ENOTSUPP;
+}
+
+static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
+			unsigned pin, unsigned long *configs,
+			unsigned num_configs)
+{
+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+	enum bcm2835_pinconf_param param;
+	u16 arg;
+	u32 off, bit;
+	int i;
+
+	for (i = 0; i < num_configs; i++) {
+		param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
+		arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
+
+		if (param != BCM2835_PINCONF_PARAM_PULL)
+			return -EINVAL;
+
+		off = GPIO_REG_OFFSET(pin);
+		bit = GPIO_REG_SHIFT(pin);
+
+		bcm2835_gpio_wr(pc, GPPUD, arg & 3);
+		/*
+		 * BCM2835 datasheet say to wait 150 cycles, but not of what.
+		 * But the VideoCore firmware delay for this operation
+		 * based nearly on the same amount of VPU cycles and this clock
+		 * runs at 250 MHz.
+		 */
+		udelay(1);
+		bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
+		udelay(1);
+		bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
+	} /* for each config */
+
+	return 0;
+}
+
+static const struct pinconf_ops bcm2835_pinconf_ops = {
+	.pin_config_get = bcm2835_pinconf_get,
+	.pin_config_set = bcm2835_pinconf_set,
+};
+
+static struct pinctrl_desc bcm2835_pinctrl_desc = {
+	.name = MODULE_NAME,
+	.pins = bcm2835_gpio_pins,
+	.npins = ARRAY_SIZE(bcm2835_gpio_pins),
+	.pctlops = &bcm2835_pctl_ops,
+	.pmxops = &bcm2835_pmx_ops,
+	.confops = &bcm2835_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+	.name = MODULE_NAME,
+	.npins = BCM2835_NUM_GPIOS,
+};
+
+static int bcm2835_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct bcm2835_pinctrl *pc;
+	struct resource iomem;
+	int err, i;
+	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
+	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pc);
+	pc->dev = dev;
+
+	err = of_address_to_resource(np, 0, &iomem);
+	if (err) {
+		dev_err(dev, "could not get IO memory\n");
+		return err;
+	}
+
+	pc->base = devm_ioremap_resource(dev, &iomem);
+	if (IS_ERR(pc->base))
+		return PTR_ERR(pc->base);
+
+	pc->gpio_chip = bcm2835_gpio_chip;
+	pc->gpio_chip.parent = dev;
+	pc->gpio_chip.of_node = np;
+
+	for (i = 0; i < BCM2835_NUM_BANKS; i++) {
+		unsigned long events;
+		unsigned offset;
+
+		/* clear event detection flags */
+		bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
+		bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
+		bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
+		bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
+		bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
+		bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
+
+		/* clear all the events */
+		events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
+		for_each_set_bit(offset, &events, 32)
+			bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+
+		raw_spin_lock_init(&pc->irq_lock[i]);
+	}
+
+	err = gpiochip_add_data(&pc->gpio_chip, pc);
+	if (err) {
+		dev_err(dev, "could not add GPIO chip\n");
+		return err;
+	}
+
+	err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
+				   0, handle_level_irq, IRQ_TYPE_NONE);
+	if (err) {
+		dev_info(dev, "could not add irqchip\n");
+		return err;
+	}
+
+	for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+		pc->irq[i] = irq_of_parse_and_map(np, i);
+
+		if (pc->irq[i] == 0)
+			continue;
+
+		/*
+		 * Use the same handler for all groups: this is necessary
+		 * since we use one gpiochip to cover all lines - the
+		 * irq handler then needs to figure out which group and
+		 * bank that was firing the IRQ and look up the per-group
+		 * and bank data.
+		 */
+		gpiochip_set_chained_irqchip(&pc->gpio_chip,
+					     &bcm2835_gpio_irq_chip,
+					     pc->irq[i],
+					     bcm2835_gpio_irq_handler);
+	}
+
+	pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+	if (IS_ERR(pc->pctl_dev)) {
+		gpiochip_remove(&pc->gpio_chip);
+		return PTR_ERR(pc->pctl_dev);
+	}
+
+	pc->gpio_range = bcm2835_pinctrl_gpio_range;
+	pc->gpio_range.base = pc->gpio_chip.base;
+	pc->gpio_range.gc = &pc->gpio_chip;
+	pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_pinctrl_match[] = {
+	{ .compatible = "brcm,bcm2835-gpio" },
+	{}
+};
+
+static struct platform_driver bcm2835_pinctrl_driver = {
+	.probe = bcm2835_pinctrl_probe,
+	.driver = {
+		.name = MODULE_NAME,
+		.of_match_table = bcm2835_pinctrl_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(bcm2835_pinctrl_driver);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
new file mode 100644
index 0000000..44df359
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
@@ -0,0 +1,1022 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Broadcom Cygnus IOMUX driver
+ *
+ * This file contains the Cygnus IOMUX driver that supports group based PINMUX
+ * configuration. Although PINMUX configuration is mainly group based, the
+ * Cygnus IOMUX controller allows certain pins to be individually muxed to GPIO
+ * function, and therefore be controlled by the Cygnus ASIU GPIO controller
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define CYGNUS_NUM_IOMUX_REGS     8
+#define CYGNUS_NUM_MUX_PER_REG    8
+#define CYGNUS_NUM_IOMUX          (CYGNUS_NUM_IOMUX_REGS * \
+				   CYGNUS_NUM_MUX_PER_REG)
+
+/*
+ * Cygnus IOMUX register description
+ *
+ * @offset: register offset for mux configuration of a group
+ * @shift: bit shift for mux configuration of a group
+ * @alt: alternate function to set to
+ */
+struct cygnus_mux {
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of Cygnus IOMUX configuration and prevent double configuration
+ *
+ * @cygnus_mux: Cygnus IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already been
+ * configured
+ */
+struct cygnus_mux_log {
+	struct cygnus_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: Cygnus group based IOMUX configuration
+ */
+struct cygnus_pin_group {
+	const char *name;
+	const unsigned *pins;
+	unsigned num_pins;
+	struct cygnus_mux mux;
+};
+
+/*
+ * Cygnus mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by this function
+ */
+struct cygnus_pin_function {
+	const char *name;
+	const char * const *groups;
+	unsigned num_groups;
+};
+
+/*
+ * Cygnus IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first I/O register base of the Cygnus IOMUX controller
+ * @base1: second I/O register base
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct cygnus_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+
+	const struct cygnus_pin_group *groups;
+	unsigned num_groups;
+
+	const struct cygnus_pin_function *functions;
+	unsigned num_functions;
+
+	struct cygnus_mux_log *mux_log;
+
+	spinlock_t lock;
+};
+
+/*
+ * Certain pins can be individually muxed to GPIO function
+ *
+ * @is_supported: flag to indicate GPIO mux is supported for this pin
+ * @offset: register offset for GPIO mux override of a pin
+ * @shift: bit shift for GPIO mux override of a pin
+ */
+struct cygnus_gpio_mux {
+	int is_supported;
+	unsigned int offset;
+	unsigned int shift;
+};
+
+/*
+ * Description of a pin in Cygnus
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @gpio_mux: GPIO override related information
+ */
+struct cygnus_pin {
+	unsigned pin;
+	char *name;
+	struct cygnus_gpio_mux gpio_mux;
+};
+
+#define CYGNUS_PIN_DESC(p, n, i, o, s)	\
+{					\
+	.pin = p,			\
+	.name = n,			\
+	.gpio_mux = {			\
+		.is_supported = i,	\
+		.offset = o,		\
+		.shift = s,		\
+	},				\
+}
+
+/*
+ * List of pins in Cygnus
+ */
+static struct cygnus_pin cygnus_pins[] = {
+	CYGNUS_PIN_DESC(0, "ext_device_reset_n", 0, 0, 0),
+	CYGNUS_PIN_DESC(1, "chip_mode0", 0, 0, 0),
+	CYGNUS_PIN_DESC(2, "chip_mode1", 0, 0, 0),
+	CYGNUS_PIN_DESC(3, "chip_mode2", 0, 0, 0),
+	CYGNUS_PIN_DESC(4, "chip_mode3", 0, 0, 0),
+	CYGNUS_PIN_DESC(5, "chip_mode4", 0, 0, 0),
+	CYGNUS_PIN_DESC(6, "bsc0_scl", 0, 0, 0),
+	CYGNUS_PIN_DESC(7, "bsc0_sda", 0, 0, 0),
+	CYGNUS_PIN_DESC(8, "bsc1_scl", 0, 0, 0),
+	CYGNUS_PIN_DESC(9, "bsc1_sda", 0, 0, 0),
+	CYGNUS_PIN_DESC(10, "d1w_dq", 1, 0x28, 0),
+	CYGNUS_PIN_DESC(11, "d1wowstz_l", 1, 0x4, 28),
+	CYGNUS_PIN_DESC(12, "gpio0", 0, 0, 0),
+	CYGNUS_PIN_DESC(13, "gpio1", 0, 0, 0),
+	CYGNUS_PIN_DESC(14, "gpio2", 0, 0, 0),
+	CYGNUS_PIN_DESC(15, "gpio3", 0, 0, 0),
+	CYGNUS_PIN_DESC(16, "gpio4", 0, 0, 0),
+	CYGNUS_PIN_DESC(17, "gpio5", 0, 0, 0),
+	CYGNUS_PIN_DESC(18, "gpio6", 0, 0, 0),
+	CYGNUS_PIN_DESC(19, "gpio7", 0, 0, 0),
+	CYGNUS_PIN_DESC(20, "gpio8", 0, 0, 0),
+	CYGNUS_PIN_DESC(21, "gpio9", 0, 0, 0),
+	CYGNUS_PIN_DESC(22, "gpio10", 0, 0, 0),
+	CYGNUS_PIN_DESC(23, "gpio11", 0, 0, 0),
+	CYGNUS_PIN_DESC(24, "gpio12", 0, 0, 0),
+	CYGNUS_PIN_DESC(25, "gpio13", 0, 0, 0),
+	CYGNUS_PIN_DESC(26, "gpio14", 0, 0, 0),
+	CYGNUS_PIN_DESC(27, "gpio15", 0, 0, 0),
+	CYGNUS_PIN_DESC(28, "gpio16", 0, 0, 0),
+	CYGNUS_PIN_DESC(29, "gpio17", 0, 0, 0),
+	CYGNUS_PIN_DESC(30, "gpio18", 0, 0, 0),
+	CYGNUS_PIN_DESC(31, "gpio19", 0, 0, 0),
+	CYGNUS_PIN_DESC(32, "gpio20", 0, 0, 0),
+	CYGNUS_PIN_DESC(33, "gpio21", 0, 0, 0),
+	CYGNUS_PIN_DESC(34, "gpio22", 0, 0, 0),
+	CYGNUS_PIN_DESC(35, "gpio23", 0, 0, 0),
+	CYGNUS_PIN_DESC(36, "mdc", 0, 0, 0),
+	CYGNUS_PIN_DESC(37, "mdio", 0, 0, 0),
+	CYGNUS_PIN_DESC(38, "pwm0", 1, 0x10, 30),
+	CYGNUS_PIN_DESC(39, "pwm1", 1, 0x10, 28),
+	CYGNUS_PIN_DESC(40, "pwm2", 1, 0x10, 26),
+	CYGNUS_PIN_DESC(41, "pwm3", 1, 0x10, 24),
+	CYGNUS_PIN_DESC(42, "sc0_clk", 1, 0x10, 22),
+	CYGNUS_PIN_DESC(43, "sc0_cmdvcc_l", 1, 0x10, 20),
+	CYGNUS_PIN_DESC(44, "sc0_detect", 1, 0x10, 18),
+	CYGNUS_PIN_DESC(45, "sc0_fcb", 1, 0x10, 16),
+	CYGNUS_PIN_DESC(46, "sc0_io", 1, 0x10, 14),
+	CYGNUS_PIN_DESC(47, "sc0_rst_l", 1, 0x10, 12),
+	CYGNUS_PIN_DESC(48, "sc1_clk", 1, 0x10, 10),
+	CYGNUS_PIN_DESC(49, "sc1_cmdvcc_l", 1, 0x10, 8),
+	CYGNUS_PIN_DESC(50, "sc1_detect", 1, 0x10, 6),
+	CYGNUS_PIN_DESC(51, "sc1_fcb", 1, 0x10, 4),
+	CYGNUS_PIN_DESC(52, "sc1_io", 1, 0x10, 2),
+	CYGNUS_PIN_DESC(53, "sc1_rst_l", 1, 0x10, 0),
+	CYGNUS_PIN_DESC(54, "spi0_clk", 1, 0x18, 10),
+	CYGNUS_PIN_DESC(55, "spi0_mosi", 1, 0x18, 6),
+	CYGNUS_PIN_DESC(56, "spi0_miso", 1, 0x18, 8),
+	CYGNUS_PIN_DESC(57, "spi0_ss", 1, 0x18, 4),
+	CYGNUS_PIN_DESC(58, "spi1_clk", 1, 0x18, 2),
+	CYGNUS_PIN_DESC(59, "spi1_mosi", 1, 0x1c, 30),
+	CYGNUS_PIN_DESC(60, "spi1_miso", 1, 0x18, 0),
+	CYGNUS_PIN_DESC(61, "spi1_ss", 1, 0x1c, 28),
+	CYGNUS_PIN_DESC(62, "spi2_clk", 1, 0x1c, 26),
+	CYGNUS_PIN_DESC(63, "spi2_mosi", 1, 0x1c, 22),
+	CYGNUS_PIN_DESC(64, "spi2_miso", 1, 0x1c, 24),
+	CYGNUS_PIN_DESC(65, "spi2_ss", 1, 0x1c, 20),
+	CYGNUS_PIN_DESC(66, "spi3_clk", 1, 0x1c, 18),
+	CYGNUS_PIN_DESC(67, "spi3_mosi", 1, 0x1c, 14),
+	CYGNUS_PIN_DESC(68, "spi3_miso", 1, 0x1c, 16),
+	CYGNUS_PIN_DESC(69, "spi3_ss", 1, 0x1c, 12),
+	CYGNUS_PIN_DESC(70, "uart0_cts", 1, 0x1c, 10),
+	CYGNUS_PIN_DESC(71, "uart0_rts", 1, 0x1c, 8),
+	CYGNUS_PIN_DESC(72, "uart0_rx", 1, 0x1c, 6),
+	CYGNUS_PIN_DESC(73, "uart0_tx", 1, 0x1c, 4),
+	CYGNUS_PIN_DESC(74, "uart1_cts", 1, 0x1c, 2),
+	CYGNUS_PIN_DESC(75, "uart1_dcd", 1, 0x1c, 0),
+	CYGNUS_PIN_DESC(76, "uart1_dsr", 1, 0x20, 14),
+	CYGNUS_PIN_DESC(77, "uart1_dtr", 1, 0x20, 12),
+	CYGNUS_PIN_DESC(78, "uart1_ri", 1, 0x20, 10),
+	CYGNUS_PIN_DESC(79, "uart1_rts", 1, 0x20, 8),
+	CYGNUS_PIN_DESC(80, "uart1_rx", 1, 0x20, 6),
+	CYGNUS_PIN_DESC(81, "uart1_tx", 1, 0x20, 4),
+	CYGNUS_PIN_DESC(82, "uart3_rx", 1, 0x20, 2),
+	CYGNUS_PIN_DESC(83, "uart3_tx", 1, 0x20, 0),
+	CYGNUS_PIN_DESC(84, "sdio1_clk_sdcard", 1, 0x14, 6),
+	CYGNUS_PIN_DESC(85, "sdio1_cmd", 1, 0x14, 4),
+	CYGNUS_PIN_DESC(86, "sdio1_data0", 1, 0x14, 2),
+	CYGNUS_PIN_DESC(87, "sdio1_data1", 1, 0x14, 0),
+	CYGNUS_PIN_DESC(88, "sdio1_data2", 1, 0x18, 30),
+	CYGNUS_PIN_DESC(89, "sdio1_data3", 1, 0x18, 28),
+	CYGNUS_PIN_DESC(90, "sdio1_wp_n", 1, 0x18, 24),
+	CYGNUS_PIN_DESC(91, "sdio1_card_rst", 1, 0x14, 10),
+	CYGNUS_PIN_DESC(92, "sdio1_led_on", 1, 0x18, 26),
+	CYGNUS_PIN_DESC(93, "sdio1_cd", 1, 0x14, 8),
+	CYGNUS_PIN_DESC(94, "sdio0_clk_sdcard", 1, 0x14, 26),
+	CYGNUS_PIN_DESC(95, "sdio0_cmd", 1, 0x14, 24),
+	CYGNUS_PIN_DESC(96, "sdio0_data0", 1, 0x14, 22),
+	CYGNUS_PIN_DESC(97, "sdio0_data1", 1, 0x14, 20),
+	CYGNUS_PIN_DESC(98, "sdio0_data2", 1, 0x14, 18),
+	CYGNUS_PIN_DESC(99, "sdio0_data3", 1, 0x14, 16),
+	CYGNUS_PIN_DESC(100, "sdio0_wp_n", 1, 0x14, 12),
+	CYGNUS_PIN_DESC(101, "sdio0_card_rst", 1, 0x14, 30),
+	CYGNUS_PIN_DESC(102, "sdio0_led_on", 1, 0x14, 14),
+	CYGNUS_PIN_DESC(103, "sdio0_cd", 1, 0x14, 28),
+	CYGNUS_PIN_DESC(104, "sflash_clk", 1, 0x18, 22),
+	CYGNUS_PIN_DESC(105, "sflash_cs_l", 1, 0x18, 20),
+	CYGNUS_PIN_DESC(106, "sflash_mosi", 1, 0x18, 14),
+	CYGNUS_PIN_DESC(107, "sflash_miso", 1, 0x18, 16),
+	CYGNUS_PIN_DESC(108, "sflash_wp_n", 1, 0x18, 12),
+	CYGNUS_PIN_DESC(109, "sflash_hold_n", 1, 0x18, 18),
+	CYGNUS_PIN_DESC(110, "nand_ale", 1, 0xc, 30),
+	CYGNUS_PIN_DESC(111, "nand_ce0_l", 1, 0xc, 28),
+	CYGNUS_PIN_DESC(112, "nand_ce1_l", 1, 0xc, 26),
+	CYGNUS_PIN_DESC(113, "nand_cle", 1, 0xc, 24),
+	CYGNUS_PIN_DESC(114, "nand_dq0", 1, 0xc, 22),
+	CYGNUS_PIN_DESC(115, "nand_dq1", 1, 0xc, 20),
+	CYGNUS_PIN_DESC(116, "nand_dq2", 1, 0xc, 18),
+	CYGNUS_PIN_DESC(117, "nand_dq3", 1, 0xc, 16),
+	CYGNUS_PIN_DESC(118, "nand_dq4", 1, 0xc, 14),
+	CYGNUS_PIN_DESC(119, "nand_dq5", 1, 0xc, 12),
+	CYGNUS_PIN_DESC(120, "nand_dq6", 1, 0xc, 10),
+	CYGNUS_PIN_DESC(121, "nand_dq7", 1, 0xc, 8),
+	CYGNUS_PIN_DESC(122, "nand_rb_l", 1, 0xc, 6),
+	CYGNUS_PIN_DESC(123, "nand_re_l", 1, 0xc, 4),
+	CYGNUS_PIN_DESC(124, "nand_we_l", 1, 0xc, 2),
+	CYGNUS_PIN_DESC(125, "nand_wp_l", 1, 0xc, 0),
+	CYGNUS_PIN_DESC(126, "lcd_clac", 1, 0x4, 26),
+	CYGNUS_PIN_DESC(127, "lcd_clcp", 1, 0x4, 24),
+	CYGNUS_PIN_DESC(128, "lcd_cld0", 1, 0x4, 22),
+	CYGNUS_PIN_DESC(129, "lcd_cld1", 1, 0x4, 0),
+	CYGNUS_PIN_DESC(130, "lcd_cld10", 1, 0x4, 20),
+	CYGNUS_PIN_DESC(131, "lcd_cld11", 1, 0x4, 18),
+	CYGNUS_PIN_DESC(132, "lcd_cld12", 1, 0x4, 16),
+	CYGNUS_PIN_DESC(133, "lcd_cld13", 1, 0x4, 14),
+	CYGNUS_PIN_DESC(134, "lcd_cld14", 1, 0x4, 12),
+	CYGNUS_PIN_DESC(135, "lcd_cld15", 1, 0x4, 10),
+	CYGNUS_PIN_DESC(136, "lcd_cld16", 1, 0x4, 8),
+	CYGNUS_PIN_DESC(137, "lcd_cld17", 1, 0x4, 6),
+	CYGNUS_PIN_DESC(138, "lcd_cld18", 1, 0x4, 4),
+	CYGNUS_PIN_DESC(139, "lcd_cld19", 1, 0x4, 2),
+	CYGNUS_PIN_DESC(140, "lcd_cld2", 1, 0x8, 22),
+	CYGNUS_PIN_DESC(141, "lcd_cld20", 1, 0x8, 30),
+	CYGNUS_PIN_DESC(142, "lcd_cld21", 1, 0x8, 28),
+	CYGNUS_PIN_DESC(143, "lcd_cld22", 1, 0x8, 26),
+	CYGNUS_PIN_DESC(144, "lcd_cld23", 1, 0x8, 24),
+	CYGNUS_PIN_DESC(145, "lcd_cld3", 1, 0x8, 20),
+	CYGNUS_PIN_DESC(146, "lcd_cld4", 1, 0x8, 18),
+	CYGNUS_PIN_DESC(147, "lcd_cld5", 1, 0x8, 16),
+	CYGNUS_PIN_DESC(148, "lcd_cld6", 1, 0x8, 14),
+	CYGNUS_PIN_DESC(149, "lcd_cld7", 1, 0x8, 12),
+	CYGNUS_PIN_DESC(150, "lcd_cld8", 1, 0x8, 10),
+	CYGNUS_PIN_DESC(151, "lcd_cld9", 1, 0x8, 8),
+	CYGNUS_PIN_DESC(152, "lcd_clfp", 1, 0x8, 6),
+	CYGNUS_PIN_DESC(153, "lcd_clle", 1, 0x8, 4),
+	CYGNUS_PIN_DESC(154, "lcd_cllp", 1, 0x8, 2),
+	CYGNUS_PIN_DESC(155, "lcd_clpower", 1, 0x8, 0),
+	CYGNUS_PIN_DESC(156, "camera_vsync", 1, 0x4, 30),
+	CYGNUS_PIN_DESC(157, "camera_trigger", 1, 0x0, 0),
+	CYGNUS_PIN_DESC(158, "camera_strobe", 1, 0x0, 2),
+	CYGNUS_PIN_DESC(159, "camera_standby", 1, 0x0, 4),
+	CYGNUS_PIN_DESC(160, "camera_reset_n", 1, 0x0, 6),
+	CYGNUS_PIN_DESC(161, "camera_pixdata9", 1, 0x0, 8),
+	CYGNUS_PIN_DESC(162, "camera_pixdata8", 1, 0x0, 10),
+	CYGNUS_PIN_DESC(163, "camera_pixdata7", 1, 0x0, 12),
+	CYGNUS_PIN_DESC(164, "camera_pixdata6", 1, 0x0, 14),
+	CYGNUS_PIN_DESC(165, "camera_pixdata5", 1, 0x0, 16),
+	CYGNUS_PIN_DESC(166, "camera_pixdata4", 1, 0x0, 18),
+	CYGNUS_PIN_DESC(167, "camera_pixdata3", 1, 0x0, 20),
+	CYGNUS_PIN_DESC(168, "camera_pixdata2", 1, 0x0, 22),
+	CYGNUS_PIN_DESC(169, "camera_pixdata1", 1, 0x0, 24),
+	CYGNUS_PIN_DESC(170, "camera_pixdata0", 1, 0x0, 26),
+	CYGNUS_PIN_DESC(171, "camera_pixclk", 1, 0x0, 28),
+	CYGNUS_PIN_DESC(172, "camera_hsync", 1, 0x0, 30),
+	CYGNUS_PIN_DESC(173, "camera_pll_ref_clk", 0, 0, 0),
+	CYGNUS_PIN_DESC(174, "usb_id_indication", 0, 0, 0),
+	CYGNUS_PIN_DESC(175, "usb_vbus_indication", 0, 0, 0),
+	CYGNUS_PIN_DESC(176, "gpio0_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(177, "gpio1_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(178, "gpio2_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(179, "gpio3_3p3", 0, 0, 0),
+};
+
+/*
+ * List of groups of pins
+ */
+static const unsigned bsc1_pins[] = { 8, 9 };
+static const unsigned pcie_clkreq_pins[] = { 8, 9 };
+
+static const unsigned i2s2_0_pins[] = { 12 };
+static const unsigned i2s2_1_pins[] = { 13 };
+static const unsigned i2s2_2_pins[] = { 14 };
+static const unsigned i2s2_3_pins[] = { 15 };
+static const unsigned i2s2_4_pins[] = { 16 };
+
+static const unsigned pwm4_pins[] = { 17 };
+static const unsigned pwm5_pins[] = { 18 };
+
+static const unsigned key0_pins[] = { 20 };
+static const unsigned key1_pins[] = { 21 };
+static const unsigned key2_pins[] = { 22 };
+static const unsigned key3_pins[] = { 23 };
+static const unsigned key4_pins[] = { 24 };
+static const unsigned key5_pins[] = { 25 };
+
+static const unsigned key6_pins[] = { 26 };
+static const unsigned audio_dte0_pins[] = { 26 };
+
+static const unsigned key7_pins[] = { 27 };
+static const unsigned audio_dte1_pins[] = { 27 };
+
+static const unsigned key8_pins[] = { 28 };
+static const unsigned key9_pins[] = { 29 };
+static const unsigned key10_pins[] = { 30 };
+static const unsigned key11_pins[] = { 31 };
+static const unsigned key12_pins[] = { 32 };
+static const unsigned key13_pins[] = { 33 };
+
+static const unsigned key14_pins[] = { 34 };
+static const unsigned audio_dte2_pins[] = { 34 };
+
+static const unsigned key15_pins[] = { 35 };
+static const unsigned audio_dte3_pins[] = { 35 };
+
+static const unsigned pwm0_pins[] = { 38 };
+static const unsigned pwm1_pins[] = { 39 };
+static const unsigned pwm2_pins[] = { 40 };
+static const unsigned pwm3_pins[] = { 41 };
+
+static const unsigned sdio0_pins[] = { 94, 95, 96, 97, 98, 99 };
+
+static const unsigned smart_card0_pins[] = { 42, 43, 44, 46, 47 };
+static const unsigned i2s0_0_pins[] = { 42, 43, 44, 46 };
+static const unsigned spdif_pins[] = { 47 };
+
+static const unsigned smart_card1_pins[] = { 48, 49, 50, 52, 53 };
+static const unsigned i2s1_0_pins[] = { 48, 49, 50, 52 };
+
+static const unsigned spi0_pins[] = { 54, 55, 56, 57 };
+
+static const unsigned spi1_pins[] = { 58, 59, 60, 61 };
+
+static const unsigned spi2_pins[] = { 62, 63, 64, 65 };
+
+static const unsigned spi3_pins[] = { 66, 67, 68, 69 };
+static const unsigned sw_led0_0_pins[] = { 66, 67, 68, 69 };
+
+static const unsigned d1w_pins[] = { 10, 11 };
+static const unsigned uart4_pins[] = { 10, 11 };
+static const unsigned sw_led2_0_pins[] = { 10, 11 };
+
+static const unsigned lcd_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+	134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+	148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned sram_0_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+	134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+	148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned spi5_pins[] = { 141, 142, 143, 144 };
+
+static const unsigned uart0_pins[] = { 70, 71, 72, 73 };
+static const unsigned sw_led0_1_pins[] = { 70, 71, 72, 73 };
+
+static const unsigned uart1_dte_pins[] = { 75, 76, 77, 78 };
+static const unsigned uart2_pins[] = { 75, 76, 77, 78 };
+
+static const unsigned uart1_pins[] = { 74, 79, 80, 81 };
+
+static const unsigned uart3_pins[] = { 82, 83 };
+
+static const unsigned qspi_0_pins[] = { 104, 105, 106, 107 };
+
+static const unsigned nand_pins[] = { 110, 111, 112, 113, 114, 115, 116, 117,
+	118, 119, 120, 121, 122, 123, 124, 125 };
+
+static const unsigned sdio0_cd_pins[] = { 103 };
+
+static const unsigned sdio0_mmc_pins[] = { 100, 101, 102 };
+
+static const unsigned sdio1_data_0_pins[] = { 86, 87 };
+static const unsigned can0_pins[] = { 86, 87 };
+static const unsigned spi4_0_pins[] = { 86, 87 };
+
+static const unsigned sdio1_data_1_pins[] = { 88, 89 };
+static const unsigned can1_pins[] = { 88, 89 };
+static const unsigned spi4_1_pins[] = { 88, 89 };
+
+static const unsigned sdio1_cd_pins[] = { 93 };
+
+static const unsigned sdio1_led_pins[] = { 84, 85 };
+static const unsigned sw_led2_1_pins[] = { 84, 85 };
+
+static const unsigned sdio1_mmc_pins[] = { 90, 91, 92 };
+
+static const unsigned cam_led_pins[] = { 156, 157, 158, 159, 160 };
+static const unsigned sw_led1_pins[] = { 156, 157, 158, 159 };
+
+static const unsigned cam_0_pins[] = { 169, 170, 171, 169, 170 };
+
+static const unsigned cam_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+	168 };
+static const unsigned sram_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+	168 };
+
+static const unsigned qspi_1_pins[] = { 108, 109 };
+
+static const unsigned smart_card0_fcb_pins[] = { 45 };
+static const unsigned i2s0_1_pins[] = { 45 };
+
+static const unsigned smart_card1_fcb_pins[] = { 51 };
+static const unsigned i2s1_1_pins[] = { 51 };
+
+static const unsigned gpio0_3p3_pins[] = { 176 };
+static const unsigned usb0_oc_pins[] = { 176 };
+
+static const unsigned gpio1_3p3_pins[] = { 177 };
+static const unsigned usb1_oc_pins[] = { 177 };
+
+static const unsigned gpio2_3p3_pins[] = { 178 };
+static const unsigned usb2_oc_pins[] = { 178 };
+
+#define CYGNUS_PIN_GROUP(group_name, off, sh, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.offset = off,				\
+		.shift = sh,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of Cygnus pin groups
+ */
+static const struct cygnus_pin_group cygnus_pin_groups[] = {
+	CYGNUS_PIN_GROUP(i2s2_0, 0x0, 0, 2),
+	CYGNUS_PIN_GROUP(i2s2_1, 0x0, 4, 2),
+	CYGNUS_PIN_GROUP(i2s2_2, 0x0, 8, 2),
+	CYGNUS_PIN_GROUP(i2s2_3, 0x0, 12, 2),
+	CYGNUS_PIN_GROUP(i2s2_4, 0x0, 16, 2),
+	CYGNUS_PIN_GROUP(pwm4, 0x0, 20, 0),
+	CYGNUS_PIN_GROUP(pwm5, 0x0, 24, 2),
+	CYGNUS_PIN_GROUP(key0, 0x4, 0, 1),
+	CYGNUS_PIN_GROUP(key1, 0x4, 4, 1),
+	CYGNUS_PIN_GROUP(key2, 0x4, 8, 1),
+	CYGNUS_PIN_GROUP(key3, 0x4, 12, 1),
+	CYGNUS_PIN_GROUP(key4, 0x4, 16, 1),
+	CYGNUS_PIN_GROUP(key5, 0x4, 20, 1),
+	CYGNUS_PIN_GROUP(key6, 0x4, 24, 1),
+	CYGNUS_PIN_GROUP(audio_dte0, 0x4, 24, 2),
+	CYGNUS_PIN_GROUP(key7, 0x4, 28, 1),
+	CYGNUS_PIN_GROUP(audio_dte1, 0x4, 28, 2),
+	CYGNUS_PIN_GROUP(key8, 0x8, 0, 1),
+	CYGNUS_PIN_GROUP(key9, 0x8, 4, 1),
+	CYGNUS_PIN_GROUP(key10, 0x8, 8, 1),
+	CYGNUS_PIN_GROUP(key11, 0x8, 12, 1),
+	CYGNUS_PIN_GROUP(key12, 0x8, 16, 1),
+	CYGNUS_PIN_GROUP(key13, 0x8, 20, 1),
+	CYGNUS_PIN_GROUP(key14, 0x8, 24, 1),
+	CYGNUS_PIN_GROUP(audio_dte2, 0x8, 24, 2),
+	CYGNUS_PIN_GROUP(key15, 0x8, 28, 1),
+	CYGNUS_PIN_GROUP(audio_dte3, 0x8, 28, 2),
+	CYGNUS_PIN_GROUP(pwm0, 0xc, 0, 0),
+	CYGNUS_PIN_GROUP(pwm1, 0xc, 4, 0),
+	CYGNUS_PIN_GROUP(pwm2, 0xc, 8, 0),
+	CYGNUS_PIN_GROUP(pwm3, 0xc, 12, 0),
+	CYGNUS_PIN_GROUP(sdio0, 0xc, 16, 0),
+	CYGNUS_PIN_GROUP(smart_card0, 0xc, 20, 0),
+	CYGNUS_PIN_GROUP(i2s0_0, 0xc, 20, 1),
+	CYGNUS_PIN_GROUP(spdif, 0xc, 20, 1),
+	CYGNUS_PIN_GROUP(smart_card1, 0xc, 24, 0),
+	CYGNUS_PIN_GROUP(i2s1_0, 0xc, 24, 1),
+	CYGNUS_PIN_GROUP(spi0, 0x10, 0, 0),
+	CYGNUS_PIN_GROUP(spi1, 0x10, 4, 0),
+	CYGNUS_PIN_GROUP(spi2, 0x10, 8, 0),
+	CYGNUS_PIN_GROUP(spi3, 0x10, 12, 0),
+	CYGNUS_PIN_GROUP(sw_led0_0, 0x10, 12, 2),
+	CYGNUS_PIN_GROUP(d1w, 0x10, 16, 0),
+	CYGNUS_PIN_GROUP(uart4, 0x10, 16, 1),
+	CYGNUS_PIN_GROUP(sw_led2_0, 0x10, 16, 2),
+	CYGNUS_PIN_GROUP(lcd, 0x10, 20, 0),
+	CYGNUS_PIN_GROUP(sram_0, 0x10, 20, 1),
+	CYGNUS_PIN_GROUP(spi5, 0x10, 20, 2),
+	CYGNUS_PIN_GROUP(uart0, 0x14, 0, 0),
+	CYGNUS_PIN_GROUP(sw_led0_1, 0x14, 0, 2),
+	CYGNUS_PIN_GROUP(uart1_dte, 0x14, 4, 0),
+	CYGNUS_PIN_GROUP(uart2, 0x14, 4, 1),
+	CYGNUS_PIN_GROUP(uart1, 0x14, 8, 0),
+	CYGNUS_PIN_GROUP(uart3, 0x14, 12, 0),
+	CYGNUS_PIN_GROUP(qspi_0, 0x14, 16, 0),
+	CYGNUS_PIN_GROUP(nand, 0x14, 20, 0),
+	CYGNUS_PIN_GROUP(sdio0_cd, 0x18, 0, 0),
+	CYGNUS_PIN_GROUP(sdio0_mmc, 0x18, 4, 0),
+	CYGNUS_PIN_GROUP(sdio1_data_0, 0x18, 8, 0),
+	CYGNUS_PIN_GROUP(can0, 0x18, 8, 1),
+	CYGNUS_PIN_GROUP(spi4_0, 0x18, 8, 2),
+	CYGNUS_PIN_GROUP(sdio1_data_1, 0x18, 12, 0),
+	CYGNUS_PIN_GROUP(can1, 0x18, 12, 1),
+	CYGNUS_PIN_GROUP(spi4_1, 0x18, 12, 2),
+	CYGNUS_PIN_GROUP(sdio1_cd, 0x18, 16, 0),
+	CYGNUS_PIN_GROUP(sdio1_led, 0x18, 20, 0),
+	CYGNUS_PIN_GROUP(sw_led2_1, 0x18, 20, 2),
+	CYGNUS_PIN_GROUP(sdio1_mmc, 0x18, 24, 0),
+	CYGNUS_PIN_GROUP(cam_led, 0x1c, 0, 0),
+	CYGNUS_PIN_GROUP(sw_led1, 0x1c, 0, 1),
+	CYGNUS_PIN_GROUP(cam_0, 0x1c, 4, 0),
+	CYGNUS_PIN_GROUP(cam_1, 0x1c, 8, 0),
+	CYGNUS_PIN_GROUP(sram_1, 0x1c, 8, 1),
+	CYGNUS_PIN_GROUP(qspi_1, 0x1c, 12, 0),
+	CYGNUS_PIN_GROUP(bsc1, 0x1c, 16, 0),
+	CYGNUS_PIN_GROUP(pcie_clkreq, 0x1c, 16, 1),
+	CYGNUS_PIN_GROUP(smart_card0_fcb, 0x20, 0, 0),
+	CYGNUS_PIN_GROUP(i2s0_1, 0x20, 0, 1),
+	CYGNUS_PIN_GROUP(smart_card1_fcb, 0x20, 4, 0),
+	CYGNUS_PIN_GROUP(i2s1_1, 0x20, 4, 1),
+	CYGNUS_PIN_GROUP(gpio0_3p3, 0x28, 0, 0),
+	CYGNUS_PIN_GROUP(usb0_oc, 0x28, 0, 1),
+	CYGNUS_PIN_GROUP(gpio1_3p3, 0x28, 4, 0),
+	CYGNUS_PIN_GROUP(usb1_oc, 0x28, 4, 1),
+	CYGNUS_PIN_GROUP(gpio2_3p3, 0x28, 8, 0),
+	CYGNUS_PIN_GROUP(usb2_oc, 0x28, 8, 1),
+};
+
+/*
+ * List of groups supported by functions
+ */
+static const char * const i2s0_grps[] = { "i2s0_0_grp", "i2s0_1_grp" };
+static const char * const i2s1_grps[] = { "i2s1_0_grp", "i2s1_1_grp" };
+static const char * const i2s2_grps[] = { "i2s2_0_grp", "i2s2_1_grp",
+	"i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp" };
+static const char * const spdif_grps[] = { "spdif_grp" };
+static const char * const pwm0_grps[] = { "pwm0_grp" };
+static const char * const pwm1_grps[] = { "pwm1_grp" };
+static const char * const pwm2_grps[] = { "pwm2_grp" };
+static const char * const pwm3_grps[] = { "pwm3_grp" };
+static const char * const pwm4_grps[] = { "pwm4_grp" };
+static const char * const pwm5_grps[] = { "pwm5_grp" };
+static const char * const key_grps[] = { "key0_grp", "key1_grp", "key2_grp",
+	"key3_grp", "key4_grp", "key5_grp", "key6_grp", "key7_grp", "key8_grp",
+	"key9_grp", "key10_grp", "key11_grp", "key12_grp", "key13_grp",
+	"key14_grp", "key15_grp" };
+static const char * const audio_dte_grps[] = { "audio_dte0_grp",
+	"audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp" };
+static const char * const smart_card0_grps[] = { "smart_card0_grp",
+	"smart_card0_fcb_grp" };
+static const char * const smart_card1_grps[] = { "smart_card1_grp",
+	"smart_card1_fcb_grp" };
+static const char * const spi0_grps[] = { "spi0_grp" };
+static const char * const spi1_grps[] = { "spi1_grp" };
+static const char * const spi2_grps[] = { "spi2_grp" };
+static const char * const spi3_grps[] = { "spi3_grp" };
+static const char * const spi4_grps[] = { "spi4_0_grp", "spi4_1_grp" };
+static const char * const spi5_grps[] = { "spi5_grp" };
+
+static const char * const sw_led0_grps[] = { "sw_led0_0_grp",
+	"sw_led0_1_grp" };
+static const char * const sw_led1_grps[] = { "sw_led1_grp" };
+static const char * const sw_led2_grps[] = { "sw_led2_0_grp",
+	"sw_led2_1_grp" };
+static const char * const d1w_grps[] = { "d1w_grp" };
+static const char * const lcd_grps[] = { "lcd_grp" };
+static const char * const sram_grps[] = { "sram_0_grp", "sram_1_grp" };
+
+static const char * const uart0_grps[] = { "uart0_grp" };
+static const char * const uart1_grps[] = { "uart1_grp", "uart1_dte_grp" };
+static const char * const uart2_grps[] = { "uart2_grp" };
+static const char * const uart3_grps[] = { "uart3_grp" };
+static const char * const uart4_grps[] = { "uart4_grp" };
+static const char * const qspi_grps[] = { "qspi_0_grp", "qspi_1_grp" };
+static const char * const nand_grps[] = { "nand_grp" };
+static const char * const sdio0_grps[] = { "sdio0_grp", "sdio0_cd_grp",
+	"sdio0_mmc_grp" };
+static const char * const sdio1_grps[] = { "sdio1_data_0_grp",
+	"sdio1_data_1_grp", "sdio1_cd_grp", "sdio1_led_grp", "sdio1_mmc_grp" };
+static const char * const can0_grps[] = { "can0_grp" };
+static const char * const can1_grps[] = { "can1_grp" };
+static const char * const cam_grps[] = { "cam_led_grp", "cam_0_grp",
+	"cam_1_grp" };
+static const char * const bsc1_grps[] = { "bsc1_grp" };
+static const char * const pcie_clkreq_grps[] = { "pcie_clkreq_grp" };
+static const char * const usb0_oc_grps[] = { "usb0_oc_grp" };
+static const char * const usb1_oc_grps[] = { "usb1_oc_grp" };
+static const char * const usb2_oc_grps[] = { "usb2_oc_grp" };
+
+#define CYGNUS_PIN_FUNCTION(func)				\
+{								\
+	.name = #func,						\
+	.groups = func ## _grps,				\
+	.num_groups = ARRAY_SIZE(func ## _grps),		\
+}
+
+/*
+ * List of supported functions in Cygnus
+ */
+static const struct cygnus_pin_function cygnus_pin_functions[] = {
+	CYGNUS_PIN_FUNCTION(i2s0),
+	CYGNUS_PIN_FUNCTION(i2s1),
+	CYGNUS_PIN_FUNCTION(i2s2),
+	CYGNUS_PIN_FUNCTION(spdif),
+	CYGNUS_PIN_FUNCTION(pwm0),
+	CYGNUS_PIN_FUNCTION(pwm1),
+	CYGNUS_PIN_FUNCTION(pwm2),
+	CYGNUS_PIN_FUNCTION(pwm3),
+	CYGNUS_PIN_FUNCTION(pwm4),
+	CYGNUS_PIN_FUNCTION(pwm5),
+	CYGNUS_PIN_FUNCTION(key),
+	CYGNUS_PIN_FUNCTION(audio_dte),
+	CYGNUS_PIN_FUNCTION(smart_card0),
+	CYGNUS_PIN_FUNCTION(smart_card1),
+	CYGNUS_PIN_FUNCTION(spi0),
+	CYGNUS_PIN_FUNCTION(spi1),
+	CYGNUS_PIN_FUNCTION(spi2),
+	CYGNUS_PIN_FUNCTION(spi3),
+	CYGNUS_PIN_FUNCTION(spi4),
+	CYGNUS_PIN_FUNCTION(spi5),
+	CYGNUS_PIN_FUNCTION(sw_led0),
+	CYGNUS_PIN_FUNCTION(sw_led1),
+	CYGNUS_PIN_FUNCTION(sw_led2),
+	CYGNUS_PIN_FUNCTION(d1w),
+	CYGNUS_PIN_FUNCTION(lcd),
+	CYGNUS_PIN_FUNCTION(sram),
+	CYGNUS_PIN_FUNCTION(uart0),
+	CYGNUS_PIN_FUNCTION(uart1),
+	CYGNUS_PIN_FUNCTION(uart2),
+	CYGNUS_PIN_FUNCTION(uart3),
+	CYGNUS_PIN_FUNCTION(uart4),
+	CYGNUS_PIN_FUNCTION(qspi),
+	CYGNUS_PIN_FUNCTION(nand),
+	CYGNUS_PIN_FUNCTION(sdio0),
+	CYGNUS_PIN_FUNCTION(sdio1),
+	CYGNUS_PIN_FUNCTION(can0),
+	CYGNUS_PIN_FUNCTION(can1),
+	CYGNUS_PIN_FUNCTION(cam),
+	CYGNUS_PIN_FUNCTION(bsc1),
+	CYGNUS_PIN_FUNCTION(pcie_clkreq),
+	CYGNUS_PIN_FUNCTION(usb0_oc),
+	CYGNUS_PIN_FUNCTION(usb1_oc),
+	CYGNUS_PIN_FUNCTION(usb2_oc),
+};
+
+static int cygnus_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *cygnus_get_group_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned selector)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int cygnus_get_group_pins(struct pinctrl_dev *pctrl_dev,
+				 unsigned selector, const unsigned **pins,
+				 unsigned *num_pins)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void cygnus_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+				struct seq_file *s, unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static const struct pinctrl_ops cygnus_pinctrl_ops = {
+	.get_groups_count = cygnus_get_groups_count,
+	.get_group_name = cygnus_get_group_name,
+	.get_group_pins = cygnus_get_group_pins,
+	.pin_dbg_show = cygnus_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int cygnus_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *cygnus_get_function_name(struct pinctrl_dev *pctrl_dev,
+					    unsigned selector)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int cygnus_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				      unsigned selector,
+				      const char * const **groups,
+				      unsigned * const num_groups)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int cygnus_pinmux_set(struct cygnus_pinctrl *pinctrl,
+			     const struct cygnus_pin_function *func,
+			     const struct cygnus_pin_group *grp,
+			     struct cygnus_mux_log *mux_log)
+{
+	const struct cygnus_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask = 0x7;
+	unsigned long flags;
+
+	for (i = 0; i < CYGNUS_NUM_IOMUX; i++) {
+		if (mux->offset != mux_log[i].mux.offset ||
+		    mux->shift != mux_log[i].mux.shift)
+			continue;
+
+		/* match found if we reach here */
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		} else {
+			/*
+			 * One tries to configure it to the same function.
+			 * Just quit and don't bother
+			 */
+			return 0;
+		}
+	}
+
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base0 + grp->mux.offset);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, pinctrl->base0 + grp->mux.offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int cygnus_pinmux_set_mux(struct pinctrl_dev *pctrl_dev,
+				 unsigned func_select, unsigned grp_select)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct cygnus_pin_function *func =
+		&pinctrl->functions[func_select];
+	const struct cygnus_pin_group *grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
+		grp->mux.offset, grp->mux.shift, grp->mux.alt);
+
+	return cygnus_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+static int cygnus_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned pin)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	/* not all pins support GPIO pinmux override */
+	if (!mux->is_supported)
+		return -ENOTSUPP;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base1 + mux->offset);
+	val |= 0x3 << mux->shift;
+	writel(val, pinctrl->base1 + mux->offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrl_dev->dev,
+		"gpio request enable pin=%u offset=0x%x shift=%u\n",
+		pin, mux->offset, mux->shift);
+
+	return 0;
+}
+
+static void cygnus_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
+				     struct pinctrl_gpio_range *range,
+				     unsigned pin)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	if (!mux->is_supported)
+		return;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base1 + mux->offset);
+	val &= ~(0x3 << mux->shift);
+	writel(val, pinctrl->base1 + mux->offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_err(pctrl_dev->dev,
+		"gpio disable free pin=%u offset=0x%x shift=%u\n",
+		pin, mux->offset, mux->shift);
+}
+
+static const struct pinmux_ops cygnus_pinmux_ops = {
+	.get_functions_count = cygnus_get_functions_count,
+	.get_function_name = cygnus_get_function_name,
+	.get_function_groups = cygnus_get_function_groups,
+	.set_mux = cygnus_pinmux_set_mux,
+	.gpio_request_enable = cygnus_gpio_request_enable,
+	.gpio_disable_free = cygnus_gpio_disable_free,
+};
+
+static struct pinctrl_desc cygnus_pinctrl_desc = {
+	.name = "cygnus-pinmux",
+	.pctlops = &cygnus_pinctrl_ops,
+	.pmxops = &cygnus_pinmux_ops,
+};
+
+static int cygnus_mux_log_init(struct cygnus_pinctrl *pinctrl)
+{
+	struct cygnus_mux_log *log;
+	unsigned int i, j;
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, CYGNUS_NUM_IOMUX,
+					sizeof(struct cygnus_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	log = pinctrl->mux_log;
+	for (i = 0; i < CYGNUS_NUM_IOMUX_REGS; i++) {
+		for (j = 0; j < CYGNUS_NUM_MUX_PER_REG; j++) {
+			log = &pinctrl->mux_log[i * CYGNUS_NUM_MUX_PER_REG
+				+ j];
+			log->mux.offset = i * 4;
+			log->mux.shift = j * 4;
+			log->mux.alt = 0;
+			log->is_configured = false;
+		}
+	}
+
+	return 0;
+}
+
+static int cygnus_pinmux_probe(struct platform_device *pdev)
+{
+	struct cygnus_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned num_pins = ARRAY_SIZE(cygnus_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base0);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pinctrl->base1 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base1)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base1);
+	}
+
+	ret = cygnus_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = cygnus_pins[i].pin;
+		pins[i].name = cygnus_pins[i].name;
+		pins[i].drv_data = &cygnus_pins[i].gpio_mux;
+	}
+
+	pinctrl->groups = cygnus_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(cygnus_pin_groups);
+	pinctrl->functions = cygnus_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(cygnus_pin_functions);
+	cygnus_pinctrl_desc.pins = pins;
+	cygnus_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = devm_pinctrl_register(&pdev->dev, &cygnus_pinctrl_desc,
+			pinctrl);
+	if (IS_ERR(pinctrl->pctl)) {
+		dev_err(&pdev->dev, "unable to register Cygnus IOMUX pinctrl\n");
+		return PTR_ERR(pinctrl->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cygnus_pinmux_of_match[] = {
+	{ .compatible = "brcm,cygnus-pinmux" },
+	{ }
+};
+
+static struct platform_driver cygnus_pinmux_driver = {
+	.driver = {
+		.name = "cygnus-pinmux",
+		.of_match_table = cygnus_pinmux_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = cygnus_pinmux_probe,
+};
+
+static int __init cygnus_pinmux_init(void)
+{
+	return platform_driver_register(&cygnus_pinmux_driver);
+}
+arch_initcall(cygnus_pinmux_init);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
new file mode 100644
index 0000000..5fe419e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -0,0 +1,909 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file contains the Broadcom Iproc GPIO driver that supports 3
+ * GPIO controllers on Iproc including the ASIU GPIO controller, the
+ * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
+ * PINCONF such as bias pull up/down, and drive strength are also supported
+ * in this driver.
+ *
+ * It provides the functionality where pins from the GPIO can be
+ * individually muxed to GPIO function, if individual pad
+ * configuration is supported, through the interaction with respective
+ * SoCs IOMUX controller.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "../pinctrl-utils.h"
+
+#define IPROC_GPIO_DATA_IN_OFFSET   0x00
+#define IPROC_GPIO_DATA_OUT_OFFSET  0x04
+#define IPROC_GPIO_OUT_EN_OFFSET    0x08
+#define IPROC_GPIO_INT_TYPE_OFFSET  0x0c
+#define IPROC_GPIO_INT_DE_OFFSET    0x10
+#define IPROC_GPIO_INT_EDGE_OFFSET  0x14
+#define IPROC_GPIO_INT_MSK_OFFSET   0x18
+#define IPROC_GPIO_INT_STAT_OFFSET  0x1c
+#define IPROC_GPIO_INT_MSTAT_OFFSET 0x20
+#define IPROC_GPIO_INT_CLR_OFFSET   0x24
+#define IPROC_GPIO_PAD_RES_OFFSET   0x34
+#define IPROC_GPIO_RES_EN_OFFSET    0x38
+
+/* drive strength control for ASIU GPIO */
+#define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
+
+/* pinconf for CCM GPIO */
+#define IPROC_GPIO_PULL_DN_OFFSET   0x10
+#define IPROC_GPIO_PULL_UP_OFFSET   0x14
+
+/* pinconf for CRMU(aon) GPIO and CCM GPIO*/
+#define IPROC_GPIO_DRV_CTRL_OFFSET  0x00
+
+#define GPIO_BANK_SIZE 0x200
+#define NGPIOS_PER_BANK 32
+#define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
+
+#define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
+#define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
+
+#define GPIO_DRV_STRENGTH_BIT_SHIFT  20
+#define GPIO_DRV_STRENGTH_BITS       3
+#define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
+
+enum iproc_pinconf_param {
+	IPROC_PINCONF_DRIVE_STRENGTH = 0,
+	IPROC_PINCONF_BIAS_DISABLE,
+	IPROC_PINCONF_BIAS_PULL_UP,
+	IPROC_PINCONF_BIAS_PULL_DOWN,
+	IPROC_PINCON_MAX,
+};
+
+enum iproc_pinconf_ctrl_type {
+	IOCTRL_TYPE_AON = 1,
+	IOCTRL_TYPE_CDRU,
+	IOCTRL_TYPE_INVALID,
+};
+
+/*
+ * Iproc GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for Iproc GPIO controller
+ * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that
+ * has the PINCONF support implemented outside of the GPIO block
+ * @lock: lock to protect access to I/O registers
+ * @gc: GPIO chip
+ * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs
+ * @pinmux_is_supported: flag to indicate this GPIO controller contains pins
+ * that can be individually muxed to GPIO
+ * @pinconf_disable: contains a list of PINCONF parameters that need to be
+ * disabled
+ * @nr_pinconf_disable: total number of PINCONF parameters that need to be
+ * disabled
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ */
+struct iproc_gpio {
+	struct device *dev;
+
+	void __iomem *base;
+	void __iomem *io_ctrl;
+	enum iproc_pinconf_ctrl_type io_ctrl_type;
+
+	raw_spinlock_t lock;
+
+	struct gpio_chip gc;
+	unsigned num_banks;
+
+	bool pinmux_is_supported;
+
+	enum pin_config_param *pinconf_disable;
+	unsigned int nr_pinconf_disable;
+
+	struct pinctrl_dev *pctl;
+	struct pinctrl_desc pctldesc;
+};
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned iproc_pin_to_gpio(unsigned pin)
+{
+	return pin;
+}
+
+/**
+ *  iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  Iproc GPIO register
+ *
+ *  @iproc_gpio: Iproc GPIO device
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg,
+				  unsigned gpio, bool set)
+{
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+	u32 val;
+
+	val = readl(chip->base + offset);
+	if (set)
+		val |= BIT(shift);
+	else
+		val &= ~BIT(shift);
+	writel(val, chip->base + offset);
+}
+
+static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg,
+				  unsigned gpio)
+{
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+
+	return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+static void iproc_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	int i, bit;
+
+	chained_irq_enter(irq_chip, desc);
+
+	/* go through the entire GPIO banks and handle all interrupts */
+	for (i = 0; i < chip->num_banks; i++) {
+		unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
+					  IPROC_GPIO_INT_MSTAT_OFFSET);
+
+		for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
+			unsigned pin = NGPIOS_PER_BANK * i + bit;
+			int child_irq = irq_find_mapping(gc->irqdomain, pin);
+
+			/*
+			 * Clear the interrupt before invoking the
+			 * handler, so we do not leave any window
+			 */
+			writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
+			       IPROC_GPIO_INT_CLR_OFFSET);
+
+			generic_handle_irq(child_irq);
+		}
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+
+static void iproc_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+			IPROC_GPIO_INT_CLR_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+	u32 val = BIT(shift);
+
+	writel(val, chip->base + offset);
+}
+
+/**
+ *  iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+
+	iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask);
+}
+
+static void iproc_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_gpio_irq_set_mask(d, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_gpio_irq_set_mask(d, true);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	bool level_triggered = false;
+	bool dual_edge = false;
+	bool rising_or_high = false;
+	unsigned long flags;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		rising_or_high = true;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		dual_edge = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		level_triggered = true;
+		rising_or_high = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		level_triggered = true;
+		break;
+
+	default:
+		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+			type);
+		return -EINVAL;
+	}
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio,
+		       level_triggered);
+	iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge);
+	iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio,
+		       rising_or_high);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev,
+		"gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n",
+		gpio, level_triggered, dual_edge, rising_or_high);
+
+	return 0;
+}
+
+static struct irq_chip iproc_gpio_irq_chip = {
+	.name = "bcm-iproc-gpio",
+	.irq_ack = iproc_gpio_irq_ack,
+	.irq_mask = iproc_gpio_irq_mask,
+	.irq_unmask = iproc_gpio_irq_unmask,
+	.irq_set_type = iproc_gpio_irq_set_type,
+};
+
+/*
+ * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO
+ */
+static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = gc->base + offset;
+
+	/* not all Iproc GPIO pins can be muxed individually */
+	if (!chip->pinmux_is_supported)
+		return 0;
+
+	return pinctrl_request_gpio(gpio);
+}
+
+static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = gc->base + offset;
+
+	if (!chip->pinmux_is_supported)
+		return;
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+
+	return 0;
+}
+
+static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+					int val)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+
+	return 0;
+}
+
+static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+					      IPROC_GPIO_DATA_IN_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+
+	return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+/*
+ * Mapping of the iProc PINCONF parameters to the generic pin configuration
+ * parameters
+ */
+static const enum pin_config_param iproc_pinconf_disable_map[] = {
+	[IPROC_PINCONF_DRIVE_STRENGTH] = PIN_CONFIG_DRIVE_STRENGTH,
+	[IPROC_PINCONF_BIAS_DISABLE] = PIN_CONFIG_BIAS_DISABLE,
+	[IPROC_PINCONF_BIAS_PULL_UP] = PIN_CONFIG_BIAS_PULL_UP,
+	[IPROC_PINCONF_BIAS_PULL_DOWN] = PIN_CONFIG_BIAS_PULL_DOWN,
+};
+
+static bool iproc_pinconf_param_is_disabled(struct iproc_gpio *chip,
+					    enum pin_config_param param)
+{
+	unsigned int i;
+
+	if (!chip->nr_pinconf_disable)
+		return false;
+
+	for (i = 0; i < chip->nr_pinconf_disable; i++)
+		if (chip->pinconf_disable[i] == param)
+			return true;
+
+	return false;
+}
+
+static int iproc_pinconf_disable_map_create(struct iproc_gpio *chip,
+					    unsigned long disable_mask)
+{
+	unsigned int map_size = ARRAY_SIZE(iproc_pinconf_disable_map);
+	unsigned int bit, nbits = 0;
+
+	/* figure out total number of PINCONF parameters to disable */
+	for_each_set_bit(bit, &disable_mask, map_size)
+		nbits++;
+
+	if (!nbits)
+		return 0;
+
+	/*
+	 * Allocate an array to store PINCONF parameters that need to be
+	 * disabled
+	 */
+	chip->pinconf_disable = devm_kcalloc(chip->dev, nbits,
+					     sizeof(*chip->pinconf_disable),
+					     GFP_KERNEL);
+	if (!chip->pinconf_disable)
+		return -ENOMEM;
+
+	chip->nr_pinconf_disable = nbits;
+
+	/* now store these parameters */
+	nbits = 0;
+	for_each_set_bit(bit, &disable_mask, map_size)
+		chip->pinconf_disable[nbits++] = iproc_pinconf_disable_map[bit];
+
+	return 0;
+}
+
+static int iproc_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *iproc_get_group_name(struct pinctrl_dev *pctldev,
+					 unsigned selector)
+{
+	return "gpio_grp";
+}
+
+static const struct pinctrl_ops iproc_pctrl_ops = {
+	.get_groups_count = iproc_get_groups_count,
+	.get_group_name = iproc_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
+				bool disable, bool pull_up)
+{
+	void __iomem *base;
+	unsigned long flags;
+	unsigned int shift;
+	u32 val_1, val_2;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+		base = chip->io_ctrl;
+		shift = IPROC_GPIO_SHIFT(gpio);
+
+		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET);
+		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET);
+		if (disable) {
+			/* no pull-up or pull-down */
+			val_1 &= ~BIT(shift);
+			val_2 &= ~BIT(shift);
+		} else if (pull_up) {
+			val_1 |= BIT(shift);
+			val_2 &= ~BIT(shift);
+		} else {
+			val_1 &= ~BIT(shift);
+			val_2 |= BIT(shift);
+		}
+		writel(val_1, base + IPROC_GPIO_PULL_UP_OFFSET);
+		writel(val_2, base + IPROC_GPIO_PULL_DN_OFFSET);
+	} else {
+		if (disable) {
+			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+				      false);
+		} else {
+			iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
+				      pull_up);
+			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+				      true);
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+	dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
+
+	return 0;
+}
+
+static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio,
+				 bool *disable, bool *pull_up)
+{
+	void __iomem *base;
+	unsigned long flags;
+	unsigned int shift;
+	u32 val_1, val_2;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+		base = chip->io_ctrl;
+		shift = IPROC_GPIO_SHIFT(gpio);
+
+		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET) & BIT(shift);
+		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET) & BIT(shift);
+
+		*pull_up = val_1 ? true : false;
+		*disable = (val_1 | val_2) ? false : true;
+
+	} else {
+		*disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
+		*pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+#define DRV_STRENGTH_OFFSET(gpio, bit, type)  ((type) == IOCTRL_TYPE_AON ? \
+	((2 - (bit)) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+	((type) == IOCTRL_TYPE_CDRU) ? \
+	((bit) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+	((bit) * 4 + IPROC_GPIO_REG(gpio, IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET)))
+
+static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
+				    unsigned strength)
+{
+	void __iomem *base;
+	unsigned int i, offset, shift;
+	u32 val;
+	unsigned long flags;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 ||  strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	if (chip->io_ctrl) {
+		base = chip->io_ctrl;
+	} else {
+		base = chip->base;
+	}
+
+	shift = IPROC_GPIO_SHIFT(gpio);
+
+	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+		strength);
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	strength = (strength / 2) - 1;
+	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
+		val = readl(base + offset);
+		val &= ~BIT(shift);
+		val |= ((strength >> i) & 0x1) << shift;
+		writel(val, base + offset);
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
+				    u16 *strength)
+{
+	void __iomem *base;
+	unsigned int i, offset, shift;
+	u32 val;
+	unsigned long flags;
+
+	if (chip->io_ctrl) {
+		base = chip->io_ctrl;
+	} else {
+		base = chip->base;
+	}
+
+	shift = IPROC_GPIO_SHIFT(gpio);
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*strength = 0;
+	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
+		val = readl(base + offset) & BIT(shift);
+		val >>= shift;
+		*strength += (val << i);
+	}
+
+	/* convert to mA */
+	*strength = (*strength + 1) * 2;
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+				 unsigned long *config)
+{
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned gpio = iproc_pin_to_gpio(pin);
+	u16 arg;
+	bool disable, pull_up;
+	int ret;
+
+	if (iproc_pinconf_param_is_disabled(chip, param))
+		return -ENOTSUPP;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (disable)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (!disable && pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (!disable && !pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = iproc_gpio_get_strength(chip, gpio, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+
+		return 0;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+				 unsigned long *configs, unsigned num_configs)
+{
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 arg;
+	unsigned i, gpio = iproc_pin_to_gpio(pin);
+	int ret = -ENOTSUPP;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+
+		if (iproc_pinconf_param_is_disabled(chip, param))
+			return -ENOTSUPP;
+
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = iproc_gpio_set_pull(chip, gpio, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = iproc_gpio_set_pull(chip, gpio, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = iproc_gpio_set_pull(chip, gpio, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = iproc_gpio_set_strength(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(chip->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	} /* for each config */
+
+out:
+	return ret;
+}
+
+static const struct pinconf_ops iproc_pconf_ops = {
+	.is_generic = true,
+	.pin_config_get = iproc_pin_config_get,
+	.pin_config_set = iproc_pin_config_set,
+};
+
+/*
+ * Iproc GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, and drive strength, when the pin is configured to GPIO
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int iproc_gpio_register_pinconf(struct iproc_gpio *chip)
+{
+	struct pinctrl_desc *pctldesc = &chip->pctldesc;
+	struct pinctrl_pin_desc *pins;
+	struct gpio_chip *gc = &chip->gc;
+	int i;
+
+	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < gc->ngpio; i++) {
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+					      "gpio-%d", i);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+
+	pctldesc->name = dev_name(chip->dev);
+	pctldesc->pctlops = &iproc_pctrl_ops;
+	pctldesc->pins = pins;
+	pctldesc->npins = gc->ngpio;
+	pctldesc->confops = &iproc_pconf_ops;
+
+	chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
+	if (IS_ERR(chip->pctl)) {
+		dev_err(chip->dev, "unable to register pinctrl device\n");
+		return PTR_ERR(chip->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id iproc_gpio_of_match[] = {
+	{ .compatible = "brcm,iproc-gpio" },
+	{ .compatible = "brcm,cygnus-ccm-gpio" },
+	{ .compatible = "brcm,cygnus-asiu-gpio" },
+	{ .compatible = "brcm,cygnus-crmu-gpio" },
+	{ .compatible = "brcm,iproc-nsp-gpio" },
+	{ .compatible = "brcm,iproc-stingray-gpio" },
+	{ /* sentinel */ }
+};
+
+static int iproc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct iproc_gpio *chip;
+	struct gpio_chip *gc;
+	u32 ngpios, pinconf_disable_mask = 0;
+	int irq, ret;
+	bool no_pinconf = false;
+	enum iproc_pinconf_ctrl_type io_ctrl_type = IOCTRL_TYPE_INVALID;
+
+	/* NSP does not support drive strength config */
+	if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio"))
+		pinconf_disable_mask = BIT(IPROC_PINCONF_DRIVE_STRENGTH);
+	/* Stingray does not support pinconf in this controller */
+	else if (of_device_is_compatible(dev->of_node,
+					 "brcm,iproc-stingray-gpio"))
+		no_pinconf = true;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		chip->io_ctrl = devm_ioremap_resource(dev, res);
+		if (IS_ERR(chip->io_ctrl)) {
+			dev_err(dev, "unable to map I/O memory\n");
+			return PTR_ERR(chip->io_ctrl);
+		}
+		if (of_device_is_compatible(dev->of_node,
+					    "brcm,cygnus-ccm-gpio"))
+			io_ctrl_type = IOCTRL_TYPE_CDRU;
+		else
+			io_ctrl_type = IOCTRL_TYPE_AON;
+	}
+
+	chip->io_ctrl_type = io_ctrl_type;
+
+	if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
+		dev_err(&pdev->dev, "missing ngpios DT property\n");
+		return -ENODEV;
+	}
+
+	raw_spin_lock_init(&chip->lock);
+
+	gc = &chip->gc;
+	gc->base = -1;
+	gc->ngpio = ngpios;
+	chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
+	gc->label = dev_name(dev);
+	gc->parent = dev;
+	gc->of_node = dev->of_node;
+	gc->request = iproc_gpio_request;
+	gc->free = iproc_gpio_free;
+	gc->direction_input = iproc_gpio_direction_input;
+	gc->direction_output = iproc_gpio_direction_output;
+	gc->set = iproc_gpio_set;
+	gc->get = iproc_gpio_get;
+
+	chip->pinmux_is_supported = of_property_read_bool(dev->of_node,
+							"gpio-ranges");
+
+	ret = gpiochip_add_data(gc, chip);
+	if (ret < 0) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	if (!no_pinconf) {
+		ret = iproc_gpio_register_pinconf(chip);
+		if (ret) {
+			dev_err(dev, "unable to register pinconf\n");
+			goto err_rm_gpiochip;
+		}
+
+		if (pinconf_disable_mask) {
+			ret = iproc_pinconf_disable_map_create(chip,
+							 pinconf_disable_mask);
+			if (ret) {
+				dev_err(dev,
+					"unable to create pinconf disable map\n");
+				goto err_rm_gpiochip;
+			}
+		}
+	}
+
+	/* optional GPIO interrupt support */
+	irq = platform_get_irq(pdev, 0);
+	if (irq) {
+		ret = gpiochip_irqchip_add(gc, &iproc_gpio_irq_chip, 0,
+					   handle_simple_irq, IRQ_TYPE_NONE);
+		if (ret) {
+			dev_err(dev, "no GPIO irqchip\n");
+			goto err_rm_gpiochip;
+		}
+
+		gpiochip_set_chained_irqchip(gc, &iproc_gpio_irq_chip, irq,
+					     iproc_gpio_irq_handler);
+	}
+
+	return 0;
+
+err_rm_gpiochip:
+	gpiochip_remove(gc);
+
+	return ret;
+}
+
+static struct platform_driver iproc_gpio_driver = {
+	.driver = {
+		.name = "iproc-gpio",
+		.of_match_table = iproc_gpio_of_match,
+	},
+	.probe = iproc_gpio_probe,
+};
+
+static int __init iproc_gpio_init(void)
+{
+	return platform_driver_register(&iproc_gpio_driver);
+}
+arch_initcall_sync(iproc_gpio_init);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-ns2-mux.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
new file mode 100644
index 0000000..951090f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
@@ -0,0 +1,1113 @@
+/* Copyright (C) 2016 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Northstar2 IOMUX driver that supports group
+ * based PINMUX configuration. The PWM is functional only when the
+ * corresponding mfio pin group is selected as gpio.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define NS2_NUM_IOMUX			19
+#define NS2_NUM_PWM_MUX			4
+
+#define NS2_PIN_MUX_BASE0		0x00
+#define NS2_PIN_MUX_BASE1		0x01
+#define NS2_PIN_CONF_BASE		0x02
+#define NS2_MUX_PAD_FUNC1_OFFSET	0x04
+
+#define NS2_PIN_SRC_MASK		0x01
+#define NS2_PIN_PULL_MASK		0x03
+#define NS2_PIN_DRIVE_STRENGTH_MASK	0x07
+
+#define NS2_PIN_PULL_UP			0x01
+#define NS2_PIN_PULL_DOWN		0x02
+
+#define NS2_PIN_INPUT_EN_MASK		0x01
+
+/*
+ * Northstar2 IOMUX register description
+ *
+ * @base: base address number
+ * @offset: register offset for mux configuration of a group
+ * @shift: bit shift for mux configuration of a group
+ * @mask: mask bits
+ * @alt: alternate function to set to
+ */
+struct ns2_mux {
+	unsigned int base;
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int mask;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of Northstar2 IOMUX configuration and prevent double
+ * configuration
+ *
+ * @ns2_mux: Northstar2 IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already
+ * been configured
+ */
+struct ns2_mux_log {
+	struct ns2_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: Northstar2 group based IOMUX configuration
+ */
+struct ns2_pin_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned int num_pins;
+	const struct ns2_mux mux;
+};
+
+/*
+ * Northstar2 mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by function
+ */
+struct ns2_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned int num_groups;
+};
+
+/*
+ * Northstar2 IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first IOMUX register base
+ * @base1: second IOMUX register base
+ * @pinconf_base: configuration register base
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct ns2_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+	void __iomem *pinconf_base;
+
+	const struct ns2_pin_group *groups;
+	unsigned int num_groups;
+
+	const struct ns2_pin_function *functions;
+	unsigned int num_functions;
+
+	struct ns2_mux_log *mux_log;
+
+	spinlock_t lock;
+};
+
+/*
+ * Pin configuration info
+ *
+ * @base: base address number
+ * @offset: register offset from base
+ * @src_shift: slew rate control bit shift in the register
+ * @input_en: input enable control bit shift
+ * @pull_shift: pull-up/pull-down control bit shift in the register
+ * @drive_shift: drive strength control bit shift in the register
+ */
+struct ns2_pinconf {
+	unsigned int base;
+	unsigned int offset;
+	unsigned int src_shift;
+	unsigned int input_en;
+	unsigned int pull_shift;
+	unsigned int drive_shift;
+};
+
+/*
+ * Description of a pin in Northstar2
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @pin_conf: pin configuration structure
+ */
+struct ns2_pin {
+	unsigned int pin;
+	char *name;
+	struct ns2_pinconf pin_conf;
+};
+
+#define NS2_PIN_DESC(p, n, b, o, s, i, pu, d)	\
+{						\
+	.pin = p,				\
+	.name = n,				\
+	.pin_conf = {				\
+		.base = b,			\
+		.offset = o,			\
+		.src_shift = s,			\
+		.input_en = i,			\
+		.pull_shift = pu,		\
+		.drive_shift = d,		\
+	}					\
+}
+
+/*
+ * List of pins in Northstar2
+ */
+static struct ns2_pin ns2_pins[] = {
+	NS2_PIN_DESC(0, "mfio_0", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(1, "mfio_1", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(2, "mfio_2", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(3, "mfio_3", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(4, "mfio_4", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(5, "mfio_5", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(6, "mfio_6", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(7, "mfio_7", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(8, "mfio_8", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(9, "mfio_9", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(10, "mfio_10", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(11, "mfio_11", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(12, "mfio_12", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(13, "mfio_13", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(14, "mfio_14", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(15, "mfio_15", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(16, "mfio_16", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(17, "mfio_17", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(18, "mfio_18", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(19, "mfio_19", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(20, "mfio_20", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(21, "mfio_21", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(22, "mfio_22", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(23, "mfio_23", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(24, "mfio_24", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(25, "mfio_25", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(26, "mfio_26", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(27, "mfio_27", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(28, "mfio_28", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(29, "mfio_29", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(30, "mfio_30", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(31, "mfio_31", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(32, "mfio_32", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(33, "mfio_33", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(34, "mfio_34", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(35, "mfio_35", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(36, "mfio_36", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(37, "mfio_37", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(38, "mfio_38", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(39, "mfio_39", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(40, "mfio_40", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(41, "mfio_41", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(42, "mfio_42", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(43, "mfio_43", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(44, "mfio_44", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(45, "mfio_45", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(46, "mfio_46", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(47, "mfio_47", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(48, "mfio_48", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(49, "mfio_49", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(50, "mfio_50", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(51, "mfio_51", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(52, "mfio_52", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(53, "mfio_53", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(54, "mfio_54", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(55, "mfio_55", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(56, "mfio_56", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(57, "mfio_57", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(58, "mfio_58", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(59, "mfio_59", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(60, "mfio_60", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(61, "mfio_61", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(62, "mfio_62", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(63, "qspi_wp", 2, 0x0, 31, 30, 27, 24),
+	NS2_PIN_DESC(64, "qspi_hold", 2, 0x0, 23, 22, 19, 16),
+	NS2_PIN_DESC(65, "qspi_cs", 2, 0x0, 15, 14, 11, 8),
+	NS2_PIN_DESC(66, "qspi_sck", 2, 0x0, 7, 6, 3, 0),
+	NS2_PIN_DESC(67, "uart3_sin", 2, 0x04, 31, 30, 27, 24),
+	NS2_PIN_DESC(68, "uart3_sout", 2, 0x04, 23, 22, 19, 16),
+	NS2_PIN_DESC(69, "qspi_mosi", 2, 0x04, 15, 14, 11, 8),
+	NS2_PIN_DESC(70, "qspi_miso", 2, 0x04, 7, 6, 3, 0),
+	NS2_PIN_DESC(71, "spi0_fss", 2, 0x08, 31, 30, 27, 24),
+	NS2_PIN_DESC(72, "spi0_rxd", 2, 0x08, 23, 22, 19, 16),
+	NS2_PIN_DESC(73, "spi0_txd", 2, 0x08, 15, 14, 11, 8),
+	NS2_PIN_DESC(74, "spi0_sck", 2, 0x08, 7, 6, 3, 0),
+	NS2_PIN_DESC(75, "spi1_fss", 2, 0x0c, 31, 30, 27, 24),
+	NS2_PIN_DESC(76, "spi1_rxd", 2, 0x0c, 23, 22, 19, 16),
+	NS2_PIN_DESC(77, "spi1_txd", 2, 0x0c, 15, 14, 11, 8),
+	NS2_PIN_DESC(78, "spi1_sck", 2, 0x0c, 7, 6, 3, 0),
+	NS2_PIN_DESC(79, "sdio0_data7", 2, 0x10, 31, 30, 27, 24),
+	NS2_PIN_DESC(80, "sdio0_emmc_rst", 2, 0x10, 23, 22, 19, 16),
+	NS2_PIN_DESC(81, "sdio0_led_on", 2, 0x10, 15, 14, 11, 8),
+	NS2_PIN_DESC(82, "sdio0_wp", 2, 0x10, 7, 6, 3, 0),
+	NS2_PIN_DESC(83, "sdio0_data3", 2, 0x14, 31, 30, 27, 24),
+	NS2_PIN_DESC(84, "sdio0_data4", 2, 0x14, 23, 22, 19, 16),
+	NS2_PIN_DESC(85, "sdio0_data5", 2, 0x14, 15, 14, 11, 8),
+	NS2_PIN_DESC(86, "sdio0_data6", 2, 0x14, 7, 6, 3, 0),
+	NS2_PIN_DESC(87, "sdio0_cmd", 2, 0x18, 31, 30, 27, 24),
+	NS2_PIN_DESC(88, "sdio0_data0", 2, 0x18, 23, 22, 19, 16),
+	NS2_PIN_DESC(89, "sdio0_data1", 2, 0x18, 15, 14, 11, 8),
+	NS2_PIN_DESC(90, "sdio0_data2", 2, 0x18, 7, 6, 3, 0),
+	NS2_PIN_DESC(91, "sdio1_led_on", 2, 0x1c, 31, 30, 27, 24),
+	NS2_PIN_DESC(92, "sdio1_wp", 2, 0x1c, 23, 22, 19, 16),
+	NS2_PIN_DESC(93, "sdio0_cd_l", 2, 0x1c, 15, 14, 11, 8),
+	NS2_PIN_DESC(94, "sdio0_clk", 2, 0x1c, 7, 6, 3, 0),
+	NS2_PIN_DESC(95, "sdio1_data5", 2, 0x20, 31, 30, 27, 24),
+	NS2_PIN_DESC(96, "sdio1_data6", 2, 0x20, 23, 22, 19, 16),
+	NS2_PIN_DESC(97, "sdio1_data7", 2, 0x20, 15, 14, 11, 8),
+	NS2_PIN_DESC(98, "sdio1_emmc_rst", 2, 0x20, 7, 6, 3, 0),
+	NS2_PIN_DESC(99, "sdio1_data1", 2, 0x24, 31, 30, 27, 24),
+	NS2_PIN_DESC(100, "sdio1_data2", 2, 0x24, 23, 22, 19, 16),
+	NS2_PIN_DESC(101, "sdio1_data3", 2, 0x24, 15, 14, 11, 8),
+	NS2_PIN_DESC(102, "sdio1_data4", 2, 0x24, 7, 6, 3, 0),
+	NS2_PIN_DESC(103, "sdio1_cd_l", 2, 0x28, 31, 30, 27, 24),
+	NS2_PIN_DESC(104, "sdio1_clk", 2, 0x28, 23, 22, 19, 16),
+	NS2_PIN_DESC(105, "sdio1_cmd", 2, 0x28, 15, 14, 11, 8),
+	NS2_PIN_DESC(106, "sdio1_data0", 2, 0x28, 7, 6, 3, 0),
+	NS2_PIN_DESC(107, "ext_mdio_0", 2, 0x2c, 15, 14, 11, 8),
+	NS2_PIN_DESC(108, "ext_mdc_0", 2, 0x2c, 7, 6, 3, 0),
+	NS2_PIN_DESC(109, "usb3_p1_vbus_ppc", 2, 0x34, 31, 30, 27, 24),
+	NS2_PIN_DESC(110, "usb3_p1_overcurrent", 2, 0x34, 23, 22, 19, 16),
+	NS2_PIN_DESC(111, "usb3_p0_vbus_ppc", 2, 0x34, 15, 14, 11, 8),
+	NS2_PIN_DESC(112, "usb3_p0_overcurrent", 2, 0x34, 7, 6, 3, 0),
+	NS2_PIN_DESC(113, "usb2_presence_indication", 2, 0x38, 31, 30, 27, 24),
+	NS2_PIN_DESC(114, "usb2_vbus_present", 2, 0x38, 23, 22, 19, 16),
+	NS2_PIN_DESC(115, "usb2_vbus_ppc", 2, 0x38, 15, 14, 11, 8),
+	NS2_PIN_DESC(116, "usb2_overcurrent", 2, 0x38, 7, 6, 3, 0),
+	NS2_PIN_DESC(117, "sata_led1", 2, 0x3c, 15, 14, 11, 8),
+	NS2_PIN_DESC(118, "sata_led0", 2, 0x3c, 7, 6, 3, 0),
+};
+
+/*
+ * List of groups of pins
+ */
+
+static const unsigned int nand_pins[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
+	11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23};
+static const unsigned int nor_data_pins[] =  {0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
+	10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25};
+
+static const unsigned int gpio_0_1_pins[] = {24, 25};
+static const unsigned int pwm_0_pins[] = {24};
+static const unsigned int pwm_1_pins[] = {25};
+
+static const unsigned int uart1_ext_clk_pins[] = {26};
+static const unsigned int nor_adv_pins[] = {26};
+
+static const unsigned int gpio_2_5_pins[] = {27, 28, 29, 30};
+static const unsigned int pcie_ab1_clk_wak_pins[] = {27, 28, 29, 30};
+static const unsigned int nor_addr_0_3_pins[] = {27, 28, 29, 30};
+static const unsigned int pwm_2_pins[] = {27};
+static const unsigned int pwm_3_pins[] = {28};
+
+static const unsigned int gpio_6_7_pins[] = {31, 32};
+static const unsigned int pcie_a3_clk_wak_pins[] = {31, 32};
+static const unsigned int nor_addr_4_5_pins[] = {31, 32};
+
+static const unsigned int gpio_8_9_pins[] = {33, 34};
+static const unsigned int pcie_b3_clk_wak_pins[] = {33, 34};
+static const unsigned int nor_addr_6_7_pins[] = {33, 34};
+
+static const unsigned int gpio_10_11_pins[] = {35, 36};
+static const unsigned int pcie_b2_clk_wak_pins[] = {35, 36};
+static const unsigned int nor_addr_8_9_pins[] = {35, 36};
+
+static const unsigned int gpio_12_13_pins[] = {37, 38};
+static const unsigned int pcie_a2_clk_wak_pins[] = {37, 38};
+static const unsigned int nor_addr_10_11_pins[] = {37, 38};
+
+static const unsigned int gpio_14_17_pins[] = {39, 40, 41, 42};
+static const unsigned int uart0_modem_pins[] = {39, 40, 41, 42};
+static const unsigned int nor_addr_12_15_pins[] = {39, 40, 41, 42};
+
+static const unsigned int gpio_18_19_pins[] = {43, 44};
+static const unsigned int uart0_rts_cts_pins[] = {43, 44};
+
+static const unsigned int gpio_20_21_pins[] = {45, 46};
+static const unsigned int uart0_in_out_pins[] = {45, 46};
+
+static const unsigned int gpio_22_23_pins[] = {47, 48};
+static const unsigned int uart1_dcd_dsr_pins[] = {47, 48};
+
+static const unsigned int gpio_24_25_pins[] = {49, 50};
+static const unsigned int uart1_ri_dtr_pins[] = {49, 50};
+
+static const unsigned int gpio_26_27_pins[] = {51, 52};
+static const unsigned int uart1_rts_cts_pins[] = {51, 52};
+
+static const unsigned int gpio_28_29_pins[] = {53, 54};
+static const unsigned int uart1_in_out_pins[] = {53, 54};
+
+static const unsigned int gpio_30_31_pins[] = {55, 56};
+static const unsigned int uart2_rts_cts_pins[] = {55, 56};
+
+#define NS2_PIN_GROUP(group_name, ba, off, sh, ma, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.base = ba,				\
+		.offset = off,				\
+		.shift = sh,				\
+		.mask = ma,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of Northstar2 pin groups
+ */
+static const struct ns2_pin_group ns2_pin_groups[] = {
+	NS2_PIN_GROUP(nand, 0, 0, 31, 1, 0),
+	NS2_PIN_GROUP(nor_data, 0, 0, 31, 1, 1),
+	NS2_PIN_GROUP(gpio_0_1, 0, 0, 31, 1, 0),
+
+	NS2_PIN_GROUP(uart1_ext_clk, 0, 4, 30, 3, 1),
+	NS2_PIN_GROUP(nor_adv, 0, 4, 30, 3, 2),
+
+	NS2_PIN_GROUP(gpio_2_5,	0, 4, 28, 3, 0),
+	NS2_PIN_GROUP(pcie_ab1_clk_wak, 0, 4, 28, 3, 1),
+	NS2_PIN_GROUP(nor_addr_0_3, 0, 4, 28, 3, 2),
+
+	NS2_PIN_GROUP(gpio_6_7, 0, 4, 26, 3, 0),
+	NS2_PIN_GROUP(pcie_a3_clk_wak, 0, 4, 26, 3, 1),
+	NS2_PIN_GROUP(nor_addr_4_5, 0, 4, 26, 3, 2),
+
+	NS2_PIN_GROUP(gpio_8_9, 0, 4, 24, 3, 0),
+	NS2_PIN_GROUP(pcie_b3_clk_wak, 0, 4, 24, 3, 1),
+	NS2_PIN_GROUP(nor_addr_6_7, 0, 4, 24, 3, 2),
+
+	NS2_PIN_GROUP(gpio_10_11, 0, 4, 22, 3, 0),
+	NS2_PIN_GROUP(pcie_b2_clk_wak, 0, 4, 22, 3, 1),
+	NS2_PIN_GROUP(nor_addr_8_9, 0, 4, 22, 3, 2),
+
+	NS2_PIN_GROUP(gpio_12_13, 0, 4, 20, 3, 0),
+	NS2_PIN_GROUP(pcie_a2_clk_wak, 0, 4, 20, 3, 1),
+	NS2_PIN_GROUP(nor_addr_10_11, 0, 4, 20, 3, 2),
+
+	NS2_PIN_GROUP(gpio_14_17, 0, 4, 18, 3, 0),
+	NS2_PIN_GROUP(uart0_modem, 0, 4, 18, 3, 1),
+	NS2_PIN_GROUP(nor_addr_12_15, 0, 4, 18, 3, 2),
+
+	NS2_PIN_GROUP(gpio_18_19, 0, 4, 16, 3, 0),
+	NS2_PIN_GROUP(uart0_rts_cts, 0, 4, 16, 3, 1),
+
+	NS2_PIN_GROUP(gpio_20_21, 0, 4, 14, 3, 0),
+	NS2_PIN_GROUP(uart0_in_out, 0, 4, 14, 3, 1),
+
+	NS2_PIN_GROUP(gpio_22_23, 0, 4, 12, 3, 0),
+	NS2_PIN_GROUP(uart1_dcd_dsr, 0, 4, 12, 3, 1),
+
+	NS2_PIN_GROUP(gpio_24_25, 0, 4, 10, 3, 0),
+	NS2_PIN_GROUP(uart1_ri_dtr, 0, 4, 10, 3, 1),
+
+	NS2_PIN_GROUP(gpio_26_27, 0, 4, 8, 3, 0),
+	NS2_PIN_GROUP(uart1_rts_cts, 0, 4, 8, 3, 1),
+
+	NS2_PIN_GROUP(gpio_28_29, 0, 4, 6, 3, 0),
+	NS2_PIN_GROUP(uart1_in_out, 0, 4, 6, 3, 1),
+
+	NS2_PIN_GROUP(gpio_30_31, 0, 4, 4, 3, 0),
+	NS2_PIN_GROUP(uart2_rts_cts, 0, 4, 4, 3, 1),
+
+	NS2_PIN_GROUP(pwm_0, 1, 0, 0, 1, 1),
+	NS2_PIN_GROUP(pwm_1, 1, 0, 1, 1, 1),
+	NS2_PIN_GROUP(pwm_2, 1, 0, 2, 1, 1),
+	NS2_PIN_GROUP(pwm_3, 1, 0, 3, 1, 1),
+};
+
+/*
+ * List of groups supported by functions
+ */
+
+static const char * const nand_grps[] = {"nand_grp"};
+
+static const char * const nor_grps[] = {"nor_data_grp", "nor_adv_grp",
+	"nor_addr_0_3_grp", "nor_addr_4_5_grp",	"nor_addr_6_7_grp",
+	"nor_addr_8_9_grp", "nor_addr_10_11_grp", "nor_addr_12_15_grp"};
+
+static const char * const gpio_grps[] = {"gpio_0_1_grp", "gpio_2_5_grp",
+	"gpio_6_7_grp",	"gpio_8_9_grp",	"gpio_10_11_grp", "gpio_12_13_grp",
+	"gpio_14_17_grp", "gpio_18_19_grp", "gpio_20_21_grp", "gpio_22_23_grp",
+	"gpio_24_25_grp", "gpio_26_27_grp", "gpio_28_29_grp",
+	"gpio_30_31_grp"};
+
+static const char * const pcie_grps[] = {"pcie_ab1_clk_wak_grp",
+	"pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp", "pcie_b2_clk_wak_grp",
+	"pcie_a2_clk_wak_grp"};
+
+static const char * const uart0_grps[] = {"uart0_modem_grp",
+	"uart0_rts_cts_grp", "uart0_in_out_grp"};
+
+static const char * const uart1_grps[] = {"uart1_ext_clk_grp",
+	"uart1_dcd_dsr_grp", "uart1_ri_dtr_grp", "uart1_rts_cts_grp",
+	"uart1_in_out_grp"};
+
+static const char * const uart2_grps[] = {"uart2_rts_cts_grp"};
+
+static const char * const pwm_grps[] = {"pwm_0_grp", "pwm_1_grp",
+	"pwm_2_grp", "pwm_3_grp"};
+
+#define NS2_PIN_FUNCTION(func)				\
+{							\
+	.name = #func,					\
+	.groups = func ## _grps,			\
+	.num_groups = ARRAY_SIZE(func ## _grps),	\
+}
+
+/*
+ * List of supported functions
+ */
+static const struct ns2_pin_function ns2_pin_functions[] = {
+	NS2_PIN_FUNCTION(nand),
+	NS2_PIN_FUNCTION(nor),
+	NS2_PIN_FUNCTION(gpio),
+	NS2_PIN_FUNCTION(pcie),
+	NS2_PIN_FUNCTION(uart0),
+	NS2_PIN_FUNCTION(uart1),
+	NS2_PIN_FUNCTION(uart2),
+	NS2_PIN_FUNCTION(pwm),
+};
+
+static int ns2_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *ns2_get_group_name(struct pinctrl_dev *pctrl_dev,
+				      unsigned int selector)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int ns2_get_group_pins(struct pinctrl_dev *pctrl_dev,
+			      unsigned int selector, const unsigned int **pins,
+			      unsigned int *num_pins)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void ns2_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+			     struct seq_file *s, unsigned int offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static const struct pinctrl_ops ns2_pinctrl_ops = {
+	.get_groups_count = ns2_get_groups_count,
+	.get_group_name = ns2_get_group_name,
+	.get_group_pins = ns2_get_group_pins,
+	.pin_dbg_show = ns2_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int ns2_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *ns2_get_function_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned int selector)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int ns2_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				   unsigned int selector,
+				   const char * const **groups,
+				   unsigned int * const num_groups)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int ns2_pinmux_set(struct ns2_pinctrl *pinctrl,
+			  const struct ns2_pin_function *func,
+			  const struct ns2_pin_group *grp,
+			  struct ns2_mux_log *mux_log)
+{
+	const struct ns2_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	for (i = 0; i < NS2_NUM_IOMUX; i++) {
+		if ((mux->shift != mux_log[i].mux.shift) ||
+			(mux->base != mux_log[i].mux.base) ||
+			(mux->offset != mux_log[i].mux.offset))
+			continue;
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+	if (i == NS2_NUM_IOMUX)
+		return -EINVAL;
+
+	mask = mux->mask;
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	switch (mux->base) {
+	case NS2_PIN_MUX_BASE0:
+		base_address = pinctrl->base0;
+		break;
+
+	case NS2_PIN_MUX_BASE1:
+		base_address = pinctrl->base1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + grp->mux.offset);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, (base_address + grp->mux.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int ns2_pinmux_enable(struct pinctrl_dev *pctrl_dev,
+			     unsigned int func_select, unsigned int grp_select)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct ns2_pin_function *func;
+	const struct ns2_pin_group *grp;
+
+	if (grp_select >= pinctrl->num_groups ||
+		func_select >= pinctrl->num_functions)
+		return -EINVAL;
+
+	func = &pinctrl->functions[func_select];
+	grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
+		grp->mux.offset, grp->mux.shift, grp->mux.alt);
+
+	return ns2_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+static int ns2_pin_set_enable(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u16 enable)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_SRC_MASK << pin_data->pin_conf.input_en);
+
+	if (!enable)
+		val |= NS2_PIN_INPUT_EN_MASK << pin_data->pin_conf.input_en;
+
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set enable:%d\n", pin, enable);
+	return 0;
+}
+
+static int ns2_pin_get_enable(struct pinctrl_dev *pctrldev, unsigned int pin)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	int enable;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	enable = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	enable = (enable >> pin_data->pin_conf.input_en) &
+			NS2_PIN_INPUT_EN_MASK;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	if (!enable)
+		enable = NS2_PIN_INPUT_EN_MASK;
+	else
+		enable = 0;
+
+	dev_dbg(pctrldev->dev, "pin:%u get disable:%d\n", pin, enable);
+	return enable;
+}
+
+static int ns2_pin_set_slew(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u32 slew)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_SRC_MASK << pin_data->pin_conf.src_shift);
+
+	if (slew)
+		val |= NS2_PIN_SRC_MASK << pin_data->pin_conf.src_shift;
+
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set slew:%d\n", pin, slew);
+	return 0;
+}
+
+static int ns2_pin_get_slew(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u16 *slew)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	*slew = (val >> pin_data->pin_conf.src_shift) & NS2_PIN_SRC_MASK;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u get slew:%d\n", pin, *slew);
+	return 0;
+}
+
+static int ns2_pin_set_pull(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    bool pull_up, bool pull_down)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_PULL_MASK << pin_data->pin_conf.pull_shift);
+
+	if (pull_up == true)
+		val |= NS2_PIN_PULL_UP << pin_data->pin_conf.pull_shift;
+	if (pull_down == true)
+		val |= NS2_PIN_PULL_DOWN << pin_data->pin_conf.pull_shift;
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set pullup:%d pulldown: %d\n",
+		pin, pull_up, pull_down);
+	return 0;
+}
+
+static void ns2_pin_get_pull(struct pinctrl_dev *pctrldev,
+			     unsigned int pin, bool *pull_up,
+			     bool *pull_down)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	val = (val >> pin_data->pin_conf.pull_shift) & NS2_PIN_PULL_MASK;
+	*pull_up = false;
+	*pull_down = false;
+
+	if (val == NS2_PIN_PULL_UP)
+		*pull_up = true;
+
+	if (val == NS2_PIN_PULL_DOWN)
+		*pull_down = true;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+}
+
+static int ns2_pin_set_strength(struct pinctrl_dev *pctrldev, unsigned int pin,
+				u32 strength)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 || strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_DRIVE_STRENGTH_MASK << pin_data->pin_conf.drive_shift);
+	val |= ((strength / 2) - 1) << pin_data->pin_conf.drive_shift;
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set drive strength:%d mA\n",
+		pin, strength);
+	return 0;
+}
+
+static int ns2_pin_get_strength(struct pinctrl_dev *pctrldev, unsigned int pin,
+				 u16 *strength)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	*strength = (val >> pin_data->pin_conf.drive_shift) &
+					NS2_PIN_DRIVE_STRENGTH_MASK;
+	*strength = (*strength + 1) * 2;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u get drive strength:%d mA\n",
+		pin, *strength);
+	return 0;
+}
+
+static int ns2_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
+			      unsigned long *config)
+{
+	struct ns2_pin *pin_data = pctldev->desc->pins[pin].drv_data;
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	bool pull_up, pull_down;
+	u16 arg = 0;
+	int ret;
+
+	if (pin_data->pin_conf.base == -1)
+		return -ENOTSUPP;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if ((pull_up == false) && (pull_down == false))
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if (pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if (pull_down)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = ns2_pin_get_strength(pctldev, pin, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	case PIN_CONFIG_SLEW_RATE:
+		ret = ns2_pin_get_slew(pctldev, pin, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	case PIN_CONFIG_INPUT_ENABLE:
+		ret = ns2_pin_get_enable(pctldev, pin);
+		if (ret)
+			return 0;
+		else
+			return -EINVAL;
+
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ns2_pin_config_set(struct pinctrl_dev *pctrldev, unsigned int pin,
+			      unsigned long *configs, unsigned int num_configs)
+{
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	enum pin_config_param param;
+	unsigned int i;
+	u32 arg;
+	int ret = -ENOTSUPP;
+
+	if (pin_data->pin_conf.base == -1)
+		return -ENOTSUPP;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = ns2_pin_set_pull(pctrldev, pin, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = ns2_pin_set_pull(pctrldev, pin, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = ns2_pin_set_pull(pctrldev, pin, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = ns2_pin_set_strength(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			ret = ns2_pin_set_slew(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			ret = ns2_pin_set_enable(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(pctrldev->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	}
+out:
+	return ret;
+}
+static const struct pinmux_ops ns2_pinmux_ops = {
+	.get_functions_count = ns2_get_functions_count,
+	.get_function_name = ns2_get_function_name,
+	.get_function_groups = ns2_get_function_groups,
+	.set_mux = ns2_pinmux_enable,
+};
+
+static const struct pinconf_ops ns2_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = ns2_pin_config_get,
+	.pin_config_set = ns2_pin_config_set,
+};
+
+static struct pinctrl_desc ns2_pinctrl_desc = {
+	.name = "ns2-pinmux",
+	.pctlops = &ns2_pinctrl_ops,
+	.pmxops = &ns2_pinmux_ops,
+	.confops = &ns2_pinconf_ops,
+};
+
+static int ns2_mux_log_init(struct ns2_pinctrl *pinctrl)
+{
+	struct ns2_mux_log *log;
+	unsigned int i;
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, NS2_NUM_IOMUX,
+					sizeof(struct ns2_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	for (i = 0; i < NS2_NUM_IOMUX; i++)
+		pinctrl->mux_log[i].is_configured = false;
+	/* Group 0 uses bit 31 in the IOMUX_PAD_FUNCTION_0 register */
+	log = &pinctrl->mux_log[0];
+	log->mux.base = NS2_PIN_MUX_BASE0;
+	log->mux.offset = 0;
+	log->mux.shift = 31;
+	log->mux.alt = 0;
+
+	/*
+	 * Groups 1 through 14 use two bits each in the
+	 * IOMUX_PAD_FUNCTION_1 register starting with
+	 * bit position 30.
+	 */
+	for (i = 1; i < (NS2_NUM_IOMUX - NS2_NUM_PWM_MUX); i++) {
+		log = &pinctrl->mux_log[i];
+		log->mux.base = NS2_PIN_MUX_BASE0;
+		log->mux.offset = NS2_MUX_PAD_FUNC1_OFFSET;
+		log->mux.shift = 32 - (i * 2);
+		log->mux.alt = 0;
+	}
+
+	/*
+	 * Groups 15 through 18 use one bit each in the
+	 * AUX_SEL register.
+	 */
+	for (i = 0; i < NS2_NUM_PWM_MUX; i++) {
+		log = &pinctrl->mux_log[(NS2_NUM_IOMUX - NS2_NUM_PWM_MUX) + i];
+		log->mux.base = NS2_PIN_MUX_BASE1;
+		log->mux.offset = 0;
+		log->mux.shift = i;
+		log->mux.alt =  0;
+	}
+	return 0;
+}
+
+static int ns2_pinmux_probe(struct platform_device *pdev)
+{
+	struct ns2_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned int num_pins = ARRAY_SIZE(ns2_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0))
+		return PTR_ERR(pinctrl->base0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start,
+					resource_size(res));
+	if (!pinctrl->base1) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	pinctrl->pinconf_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->pinconf_base))
+		return PTR_ERR(pinctrl->pinconf_base);
+
+	ret = ns2_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = ns2_pins[i].pin;
+		pins[i].name = ns2_pins[i].name;
+		pins[i].drv_data = &ns2_pins[i];
+	}
+
+	pinctrl->groups = ns2_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(ns2_pin_groups);
+	pinctrl->functions = ns2_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(ns2_pin_functions);
+	ns2_pinctrl_desc.pins = pins;
+	ns2_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = pinctrl_register(&ns2_pinctrl_desc, &pdev->dev,
+			pinctrl);
+	if (IS_ERR(pinctrl->pctl)) {
+		dev_err(&pdev->dev, "unable to register IOMUX pinctrl\n");
+		return PTR_ERR(pinctrl->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ns2_pinmux_of_match[] = {
+	{.compatible = "brcm,ns2-pinmux"},
+	{ }
+};
+
+static struct platform_driver ns2_pinmux_driver = {
+	.driver = {
+		.name = "ns2-pinmux",
+		.of_match_table = ns2_pinmux_of_match,
+	},
+	.probe = ns2_pinmux_probe,
+};
+
+static int __init ns2_pinmux_init(void)
+{
+	return platform_driver_register(&ns2_pinmux_driver);
+}
+arch_initcall(ns2_pinmux_init);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
new file mode 100644
index 0000000..1cfe45f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -0,0 +1,748 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file contains the Broadcom Northstar Plus (NSP) GPIO driver that
+ * supports the chipCommonA GPIO controller. Basic PINCONF such as bias,
+ * pull up/down, slew and drive strength are also supported in this driver.
+ *
+ * Pins from the chipCommonA  GPIO can be individually muxed to GPIO function,
+ * through the interaction with the NSP IOMUX controller.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+
+#include "../pinctrl-utils.h"
+
+#define NSP_CHIP_A_INT_STATUS		0x00
+#define NSP_CHIP_A_INT_MASK		0x04
+#define NSP_GPIO_DATA_IN		0x40
+#define NSP_GPIO_DATA_OUT		0x44
+#define NSP_GPIO_OUT_EN			0x48
+#define NSP_GPIO_INT_POLARITY		0x50
+#define NSP_GPIO_INT_MASK		0x54
+#define NSP_GPIO_EVENT			0x58
+#define NSP_GPIO_EVENT_INT_MASK		0x5c
+#define NSP_GPIO_EVENT_INT_POLARITY	0x64
+#define NSP_CHIP_A_GPIO_INT_BIT		0x01
+
+/* I/O parameters offset for chipcommon A GPIO */
+#define NSP_GPIO_DRV_CTRL		0x00
+#define NSP_GPIO_HYSTERESIS_EN		0x10
+#define NSP_GPIO_SLEW_RATE_EN		0x14
+#define NSP_PULL_UP_EN			0x18
+#define NSP_PULL_DOWN_EN		0x1c
+#define GPIO_DRV_STRENGTH_BITS		0x03
+
+/*
+ * nsp GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for nsp GPIO controller
+ * @io_ctrl: I/O register base for PINCONF support outside the GPIO block
+ * @gc: GPIO chip
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ * @irq_domain: pointer to irq domain
+ * @lock: lock to protect access to I/O registers
+ */
+struct nsp_gpio {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *io_ctrl;
+	struct gpio_chip gc;
+	struct pinctrl_dev *pctl;
+	struct pinctrl_desc pctldesc;
+	struct irq_domain *irq_domain;
+	raw_spinlock_t lock;
+};
+
+enum base_type {
+	REG,
+	IO_CTRL
+};
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned nsp_pin_to_gpio(unsigned pin)
+{
+	return pin;
+}
+
+/*
+ *  nsp_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ *
+ *  @nsp_gpio: nsp GPIO device
+ *  @base_type: reg base to modify
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void nsp_set_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio, bool set)
+{
+	u32 val;
+	void __iomem *base_address;
+
+	if (address == IO_CTRL)
+		base_address = chip->io_ctrl;
+	else
+		base_address = chip->base;
+
+	val = readl(base_address + reg);
+	if (set)
+		val |= BIT(gpio);
+	else
+		val &= ~BIT(gpio);
+
+	writel(val, base_address + reg);
+}
+
+/*
+ *  nsp_get_bit - get one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ */
+static inline bool nsp_get_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio)
+{
+	if (address == IO_CTRL)
+		return !!(readl(chip->io_ctrl + reg) & BIT(gpio));
+	else
+		return !!(readl(chip->base + reg) & BIT(gpio));
+}
+
+static irqreturn_t nsp_gpio_irq_handler(int irq, void *data)
+{
+	struct nsp_gpio *chip = (struct nsp_gpio *)data;
+	struct gpio_chip gc = chip->gc;
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl(chip->base + NSP_CHIP_A_INT_STATUS);
+	if (int_status & NSP_CHIP_A_GPIO_INT_BIT) {
+		unsigned int event, level;
+
+		/* Get level and edge interrupts */
+		event = readl(chip->base + NSP_GPIO_EVENT_INT_MASK) &
+			      readl(chip->base + NSP_GPIO_EVENT);
+		level = readl(chip->base + NSP_GPIO_DATA_IN) ^
+			      readl(chip->base + NSP_GPIO_INT_POLARITY);
+		level &= readl(chip->base + NSP_GPIO_INT_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc.ngpio) {
+			/*
+			 * Clear the interrupt before invoking the
+			 * handler, so we do not leave any window
+			 */
+			writel(BIT(bit), chip->base + NSP_GPIO_EVENT);
+			generic_handle_irq(
+				irq_linear_revmap(chip->irq_domain, bit));
+		}
+	}
+
+	return  int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void nsp_gpio_irq_ack(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	u32 val = BIT(gpio);
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		nsp_set_bit(chip, REG, NSP_GPIO_EVENT, gpio, val);
+}
+
+/*
+ *  nsp_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void nsp_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_MASK, gpio, unmask);
+	else
+		nsp_set_bit(chip, REG, NSP_GPIO_INT_MASK, gpio, unmask);
+}
+
+static void nsp_gpio_irq_mask(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void nsp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, true);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	bool level_low;
+	bool falling;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	falling = nsp_get_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio);
+	level_low = nsp_get_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio);
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		falling = false;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		falling = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		level_low = false;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		level_low = true;
+		break;
+
+	default:
+		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+			type);
+		raw_spin_unlock_irqrestore(&chip->lock, flags);
+		return -EINVAL;
+	}
+
+	nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling);
+	nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio,
+		level_low ? "true" : "false", falling ? "true" : "false");
+	return 0;
+}
+
+static struct irq_chip nsp_gpio_irq_chip = {
+	.name = "gpio-a",
+	.irq_enable = nsp_gpio_irq_unmask,
+	.irq_disable = nsp_gpio_irq_mask,
+	.irq_ack = nsp_gpio_irq_ack,
+	.irq_mask = nsp_gpio_irq_mask,
+	.irq_unmask = nsp_gpio_irq_unmask,
+	.irq_set_type = nsp_gpio_irq_set_type,
+};
+
+/*
+ * Request the nsp IOMUX pinmux controller to mux individual pins to GPIO
+ */
+static int nsp_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned gpio = gc->base + offset;
+
+	return pinctrl_request_gpio(gpio);
+}
+
+static void nsp_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned gpio = gc->base + offset;
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int nsp_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+	return 0;
+}
+
+static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+				     int val)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, true);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+	return 0;
+}
+
+static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int nsp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+
+	return !!(readl(chip->base + NSP_GPIO_DATA_IN) & BIT(gpio));
+}
+
+static int nsp_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+
+	return irq_linear_revmap(chip->irq_domain, offset);
+}
+
+static int nsp_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *nsp_get_group_name(struct pinctrl_dev *pctldev,
+				      unsigned selector)
+{
+	return "gpio_grp";
+}
+
+static const struct pinctrl_ops nsp_pctrl_ops = {
+	.get_groups_count = nsp_get_groups_count,
+	.get_group_name = nsp_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int nsp_gpio_set_slew(struct nsp_gpio *chip, unsigned gpio, u32 slew)
+{
+	if (slew)
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, true);
+	else
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, false);
+
+	return 0;
+}
+
+static int nsp_gpio_set_pull(struct nsp_gpio *chip, unsigned gpio,
+			     bool pull_up, bool pull_down)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio, pull_down);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio, pull_up);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set pullup:%d pulldown: %d\n",
+		gpio, pull_up, pull_down);
+	return 0;
+}
+
+static void nsp_gpio_get_pull(struct nsp_gpio *chip, unsigned gpio,
+			      bool *pull_up, bool *pull_down)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*pull_up = nsp_get_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio);
+	*pull_down = nsp_get_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_set_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u32 strength)
+{
+	u32 offset, shift, i;
+	u32 val;
+	unsigned long flags;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 || strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	shift = gpio;
+	offset = NSP_GPIO_DRV_CTRL;
+	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+		strength);
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	strength = (strength / 2) - 1;
+	for (i = GPIO_DRV_STRENGTH_BITS; i > 0; i--) {
+		val = readl(chip->io_ctrl + offset);
+		val &= ~BIT(shift);
+		val |= ((strength >> (i-1)) & 0x1) << shift;
+		writel(val, chip->io_ctrl + offset);
+		offset += 4;
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int nsp_gpio_get_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u16 *strength)
+{
+	unsigned int offset, shift;
+	u32 val;
+	unsigned long flags;
+	int i;
+
+	offset = NSP_GPIO_DRV_CTRL;
+	shift = gpio;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*strength = 0;
+	for (i = (GPIO_DRV_STRENGTH_BITS - 1); i >= 0; i--) {
+		val = readl(chip->io_ctrl + offset) & BIT(shift);
+		val >>= shift;
+		*strength += (val << i);
+		offset += 4;
+	}
+
+	/* convert to mA */
+	*strength = (*strength + 1) * 2;
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int nsp_pin_config_group_get(struct pinctrl_dev *pctldev,
+				    unsigned selector,
+			     unsigned long *config)
+{
+	return 0;
+}
+
+static int nsp_pin_config_group_set(struct pinctrl_dev *pctldev,
+				    unsigned selector,
+			     unsigned long *configs, unsigned num_configs)
+{
+	return 0;
+}
+
+static int nsp_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *config)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned int gpio;
+	u16 arg = 0;
+	bool pull_up, pull_down;
+	int ret;
+
+	gpio = nsp_pin_to_gpio(pin);
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if ((pull_up == false) && (pull_down == false))
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_down)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = nsp_gpio_get_strength(chip, gpio, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int nsp_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *configs, unsigned num_configs)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 arg;
+	unsigned int i, gpio;
+	int ret = -ENOTSUPP;
+
+	gpio = nsp_pin_to_gpio(pin);
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = nsp_gpio_set_pull(chip, gpio, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = nsp_gpio_set_pull(chip, gpio, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = nsp_gpio_set_pull(chip, gpio, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = nsp_gpio_set_strength(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			ret = nsp_gpio_set_slew(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(chip->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static const struct pinconf_ops nsp_pconf_ops = {
+	.is_generic = true,
+	.pin_config_get = nsp_pin_config_get,
+	.pin_config_set = nsp_pin_config_set,
+	.pin_config_group_get = nsp_pin_config_group_get,
+	.pin_config_group_set = nsp_pin_config_group_set,
+};
+
+/*
+ * NSP GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, slew and drive strength, when the pin is configured
+ * to GPIO.
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int nsp_gpio_register_pinconf(struct nsp_gpio *chip)
+{
+	struct pinctrl_desc *pctldesc = &chip->pctldesc;
+	struct pinctrl_pin_desc *pins;
+	struct gpio_chip *gc = &chip->gc;
+	int i;
+
+	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+	for (i = 0; i < gc->ngpio; i++) {
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+					      "gpio-%d", i);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+	pctldesc->name = dev_name(chip->dev);
+	pctldesc->pctlops = &nsp_pctrl_ops;
+	pctldesc->pins = pins;
+	pctldesc->npins = gc->ngpio;
+	pctldesc->confops = &nsp_pconf_ops;
+
+	chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
+	if (IS_ERR(chip->pctl)) {
+		dev_err(chip->dev, "unable to register pinctrl device\n");
+		return PTR_ERR(chip->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_gpio_of_match[] = {
+	{.compatible = "brcm,nsp-gpio-a",},
+	{}
+};
+
+static int nsp_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nsp_gpio *chip;
+	struct gpio_chip *gc;
+	u32 val, count;
+	int irq, ret;
+
+	if (of_property_read_u32(pdev->dev.of_node, "ngpios", &val)) {
+		dev_err(&pdev->dev, "Missing ngpios OF property\n");
+		return -ENODEV;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	chip->io_ctrl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->io_ctrl)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->io_ctrl);
+	}
+
+	raw_spin_lock_init(&chip->lock);
+	gc = &chip->gc;
+	gc->base = -1;
+	gc->can_sleep = false;
+	gc->ngpio = val;
+	gc->label = dev_name(dev);
+	gc->parent = dev;
+	gc->of_node = dev->of_node;
+	gc->request = nsp_gpio_request;
+	gc->free = nsp_gpio_free;
+	gc->direction_input = nsp_gpio_direction_input;
+	gc->direction_output = nsp_gpio_direction_output;
+	gc->set = nsp_gpio_set;
+	gc->get = nsp_gpio_get;
+	gc->to_irq = nsp_gpio_to_irq;
+
+	/* optional GPIO interrupt support */
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		/* Create irq domain so that each pin can be assigned an IRQ.*/
+		chip->irq_domain = irq_domain_add_linear(gc->of_node, gc->ngpio,
+							 &irq_domain_simple_ops,
+							 chip);
+		if (!chip->irq_domain) {
+			dev_err(&pdev->dev, "Couldn't allocate IRQ domain\n");
+			return -ENXIO;
+		}
+
+		/* Map each gpio to an IRQ and set the handler for gpiolib. */
+		for (count = 0; count < gc->ngpio; count++) {
+			int irq = irq_create_mapping(chip->irq_domain, count);
+
+			irq_set_chip_and_handler(irq, &nsp_gpio_irq_chip,
+						 handle_simple_irq);
+			irq_set_chip_data(irq, chip);
+		}
+
+		/* Install ISR for this GPIO controller. */
+		ret = devm_request_irq(&pdev->dev, irq, nsp_gpio_irq_handler,
+				       IRQF_SHARED, "gpio-a", chip);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request IRQ%d: %d\n",
+				irq, ret);
+			goto err_rm_gpiochip;
+		}
+
+		val = readl(chip->base + NSP_CHIP_A_INT_MASK);
+		val = val | NSP_CHIP_A_GPIO_INT_BIT;
+		writel(val, (chip->base + NSP_CHIP_A_INT_MASK));
+	}
+
+	ret = gpiochip_add_data(gc, chip);
+	if (ret < 0) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	ret = nsp_gpio_register_pinconf(chip);
+	if (ret) {
+		dev_err(dev, "unable to register pinconf\n");
+		goto err_rm_gpiochip;
+	}
+
+	return 0;
+
+err_rm_gpiochip:
+	gpiochip_remove(gc);
+
+	return ret;
+}
+
+static struct platform_driver nsp_gpio_driver = {
+	.driver = {
+		.name = "nsp-gpio-a",
+		.of_match_table = nsp_gpio_of_match,
+	},
+	.probe = nsp_gpio_probe,
+};
+
+static int __init nsp_gpio_init(void)
+{
+	return platform_driver_register(&nsp_gpio_driver);
+}
+arch_initcall_sync(nsp_gpio_init);
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
new file mode 100644
index 0000000..87618a4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
@@ -0,0 +1,644 @@
+/* Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Northstar plus (NSP) IOMUX driver that supports
+ * group based PINMUX configuration. The Northstar plus IOMUX controller
+ * allows pins to be individually muxed to GPIO function. The NAND and MMC is
+ * a group based selection. The gpio_a 8 - 11 are muxed with gpio_b and pwm.
+ * To select PWM, one need to enable the corresponding gpio_b as well.
+ *
+ *				gpio_a (8 - 11)
+ *				+----------
+ *				|
+ *		gpio_a (8-11)	|	gpio_b (0 - 3)
+ *	------------------------+-------+----------
+ *					|
+ *					|	pwm (0 - 3)
+ *					+----------
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define NSP_MUX_BASE0	0x00
+#define NSP_MUX_BASE1	0x01
+#define NSP_MUX_BASE2	0x02
+/*
+ * nsp IOMUX register description
+ *
+ * @base: base 0 or base 1
+ * @shift: bit shift for mux configuration of a group
+ * @mask: bit mask of the function
+ * @alt: alternate function to set to
+ */
+struct nsp_mux {
+	unsigned int base;
+	unsigned int shift;
+	unsigned int mask;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of nsp IOMUX configuration and prevent double configuration
+ *
+ * @nsp_mux: nsp IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already been
+ * configured
+ */
+struct nsp_mux_log {
+	struct nsp_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: nsp group based IOMUX configuration
+ */
+struct nsp_pin_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned int num_pins;
+	const struct nsp_mux mux;
+};
+
+/*
+ * nsp mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by this function
+ */
+struct nsp_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned int num_groups;
+};
+
+/*
+ * nsp IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first mux register
+ * @base1: second mux register
+ * @base2: third mux register
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct nsp_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+	void __iomem *base2;
+	const struct nsp_pin_group *groups;
+	unsigned int num_groups;
+	const struct nsp_pin_function *functions;
+	unsigned int num_functions;
+	struct nsp_mux_log *mux_log;
+	spinlock_t lock;
+};
+
+/*
+ * Description of a pin in nsp
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @gpio_select: reg data to select GPIO
+ */
+struct nsp_pin {
+	unsigned int pin;
+	char *name;
+	unsigned int gpio_select;
+};
+
+#define NSP_PIN_DESC(p, n, g)		\
+{					\
+	.pin = p,			\
+	.name = n,			\
+	.gpio_select = g,		\
+}
+
+/*
+ * List of muxable pins in nsp
+ */
+static struct nsp_pin nsp_pins[] = {
+	NSP_PIN_DESC(0, "spi_clk", 1),
+	NSP_PIN_DESC(1, "spi_ss", 1),
+	NSP_PIN_DESC(2, "spi_mosi", 1),
+	NSP_PIN_DESC(3, "spi_miso", 1),
+	NSP_PIN_DESC(4, "scl", 1),
+	NSP_PIN_DESC(5, "sda", 1),
+	NSP_PIN_DESC(6, "mdc", 1),
+	NSP_PIN_DESC(7, "mdio", 1),
+	NSP_PIN_DESC(8, "pwm0", 1),
+	NSP_PIN_DESC(9, "pwm1", 1),
+	NSP_PIN_DESC(10, "pwm2", 1),
+	NSP_PIN_DESC(11, "pwm3", 1),
+	NSP_PIN_DESC(12, "uart1_rx", 1),
+	NSP_PIN_DESC(13, "uart1_tx", 1),
+	NSP_PIN_DESC(14, "uart1_cts", 1),
+	NSP_PIN_DESC(15, "uart1_rts", 1),
+	NSP_PIN_DESC(16, "uart2_rx", 1),
+	NSP_PIN_DESC(17, "uart2_tx", 1),
+	NSP_PIN_DESC(18, "synce", 0),
+	NSP_PIN_DESC(19, "sata0_led", 0),
+	NSP_PIN_DESC(20, "sata1_led", 0),
+	NSP_PIN_DESC(21, "xtal_out", 1),
+	NSP_PIN_DESC(22, "sdio_pwr", 1),
+	NSP_PIN_DESC(23, "sdio_en_1p8v", 1),
+	NSP_PIN_DESC(24, "gpio_24", 1),
+	NSP_PIN_DESC(25, "gpio_25", 1),
+	NSP_PIN_DESC(26, "p5_led0", 0),
+	NSP_PIN_DESC(27, "p5_led1", 0),
+	NSP_PIN_DESC(28, "gpio_28", 1),
+	NSP_PIN_DESC(29, "gpio_29", 1),
+	NSP_PIN_DESC(30, "gpio_30", 1),
+	NSP_PIN_DESC(31, "gpio_31", 1),
+	NSP_PIN_DESC(32, "nand_ale", 0),
+	NSP_PIN_DESC(33, "nand_ce0", 0),
+	NSP_PIN_DESC(34, "nand_r/b", 0),
+	NSP_PIN_DESC(35, "nand_dq0", 0),
+	NSP_PIN_DESC(36, "nand_dq1", 0),
+	NSP_PIN_DESC(37, "nand_dq2", 0),
+	NSP_PIN_DESC(38, "nand_dq3", 0),
+	NSP_PIN_DESC(39, "nand_dq4", 0),
+	NSP_PIN_DESC(40, "nand_dq5", 0),
+	NSP_PIN_DESC(41, "nand_dq6", 0),
+	NSP_PIN_DESC(42, "nand_dq7", 0),
+};
+
+/*
+ * List of groups of pins
+ */
+
+static const unsigned int spi_pins[] = {0, 1, 2, 3};
+static const unsigned int i2c_pins[] = {4, 5};
+static const unsigned int mdio_pins[] = {6, 7};
+static const unsigned int pwm0_pins[] = {8};
+static const unsigned int gpio_b_0_pins[] = {8};
+static const unsigned int pwm1_pins[] = {9};
+static const unsigned int gpio_b_1_pins[] = {9};
+static const unsigned int pwm2_pins[] = {10};
+static const unsigned int gpio_b_2_pins[] = {10};
+static const unsigned int pwm3_pins[] = {11};
+static const unsigned int gpio_b_3_pins[] = {11};
+static const unsigned int uart1_pins[] = {12, 13, 14, 15};
+static const unsigned int uart2_pins[] = {16, 17};
+static const unsigned int synce_pins[] = {18};
+static const unsigned int sata0_led_pins[] = {19};
+static const unsigned int sata1_led_pins[] = {20};
+static const unsigned int xtal_out_pins[] = {21};
+static const unsigned int sdio_pwr_pins[] = {22};
+static const unsigned int sdio_1p8v_pins[] = {23};
+static const unsigned int switch_p05_led0_pins[] = {26};
+static const unsigned int switch_p05_led1_pins[] = {27};
+static const unsigned int nand_pins[] = {32, 33, 34, 35, 36, 37, 38, 39,
+							40, 41, 42};
+static const unsigned int emmc_pins[] = {32, 33, 34, 35, 36, 37, 38, 39,
+							40, 41, 42};
+
+#define NSP_PIN_GROUP(group_name, ba, sh, ma, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.base = ba,				\
+		.shift = sh,				\
+		.mask = ma,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of nsp pin groups
+ */
+static const struct nsp_pin_group nsp_pin_groups[] = {
+	NSP_PIN_GROUP(spi, NSP_MUX_BASE0, 0, 0x0f, 0x00),
+	NSP_PIN_GROUP(i2c, NSP_MUX_BASE0, 3, 0x03, 0x00),
+	NSP_PIN_GROUP(mdio, NSP_MUX_BASE0, 5, 0x03, 0x00),
+	NSP_PIN_GROUP(gpio_b_0, NSP_MUX_BASE0, 7, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm0, NSP_MUX_BASE1, 0, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_1, NSP_MUX_BASE0, 8, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm1, NSP_MUX_BASE1, 1, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_2, NSP_MUX_BASE0, 9, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm2, NSP_MUX_BASE1, 2, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_3, NSP_MUX_BASE0, 10, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm3, NSP_MUX_BASE1, 3, 0x01, 0x01),
+	NSP_PIN_GROUP(uart1, NSP_MUX_BASE0, 11, 0x0f, 0x00),
+	NSP_PIN_GROUP(uart2, NSP_MUX_BASE0, 15, 0x03, 0x00),
+	NSP_PIN_GROUP(synce, NSP_MUX_BASE0, 17, 0x01, 0x01),
+	NSP_PIN_GROUP(sata0_led, NSP_MUX_BASE0, 18, 0x01, 0x01),
+	NSP_PIN_GROUP(sata1_led, NSP_MUX_BASE0, 19, 0x01, 0x01),
+	NSP_PIN_GROUP(xtal_out, NSP_MUX_BASE0, 20, 0x01, 0x00),
+	NSP_PIN_GROUP(sdio_pwr, NSP_MUX_BASE0, 21, 0x01, 0x00),
+	NSP_PIN_GROUP(sdio_1p8v, NSP_MUX_BASE0, 22, 0x01, 0x00),
+	NSP_PIN_GROUP(switch_p05_led0, NSP_MUX_BASE0, 26, 0x01, 0x01),
+	NSP_PIN_GROUP(switch_p05_led1, NSP_MUX_BASE0, 27, 0x01, 0x01),
+	NSP_PIN_GROUP(nand, NSP_MUX_BASE2, 0, 0x01, 0x00),
+	NSP_PIN_GROUP(emmc, NSP_MUX_BASE2, 0, 0x01, 0x01)
+};
+
+/*
+ * List of groups supported by functions
+ */
+
+static const char * const spi_grps[] = {"spi_grp"};
+static const char * const i2c_grps[] = {"i2c_grp"};
+static const char * const mdio_grps[] = {"mdio_grp"};
+static const char * const pwm_grps[] = {"pwm0_grp", "pwm1_grp", "pwm2_grp"
+						, "pwm3_grp"};
+static const char * const gpio_b_grps[] = {"gpio_b_0_grp", "gpio_b_1_grp",
+					"gpio_b_2_grp", "gpio_b_3_grp"};
+static const char * const uart1_grps[] = {"uart1_grp"};
+static const char * const uart2_grps[] = {"uart2_grp"};
+static const char * const synce_grps[] = {"synce_grp"};
+static const char * const sata_led_grps[] = {"sata0_led_grp", "sata1_led_grp"};
+static const char * const xtal_out_grps[] = {"xtal_out_grp"};
+static const char * const sdio_grps[] = {"sdio_pwr_grp", "sdio_1p8v_grp"};
+static const char * const switch_led_grps[] = {"switch_p05_led0_grp",
+						"switch_p05_led1_grp"};
+static const char * const nand_grps[] = {"nand_grp"};
+static const char * const emmc_grps[] = {"emmc_grp"};
+
+#define NSP_PIN_FUNCTION(func)				\
+{							\
+	.name = #func,					\
+	.groups = func ## _grps,			\
+	.num_groups = ARRAY_SIZE(func ## _grps),	\
+}
+
+/*
+ * List of supported functions in nsp
+ */
+static const struct nsp_pin_function nsp_pin_functions[] = {
+	NSP_PIN_FUNCTION(spi),
+	NSP_PIN_FUNCTION(i2c),
+	NSP_PIN_FUNCTION(mdio),
+	NSP_PIN_FUNCTION(pwm),
+	NSP_PIN_FUNCTION(gpio_b),
+	NSP_PIN_FUNCTION(uart1),
+	NSP_PIN_FUNCTION(uart2),
+	NSP_PIN_FUNCTION(synce),
+	NSP_PIN_FUNCTION(sata_led),
+	NSP_PIN_FUNCTION(xtal_out),
+	NSP_PIN_FUNCTION(sdio),
+	NSP_PIN_FUNCTION(switch_led),
+	NSP_PIN_FUNCTION(nand),
+	NSP_PIN_FUNCTION(emmc)
+};
+
+static int nsp_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *nsp_get_group_name(struct pinctrl_dev *pctrl_dev,
+				      unsigned int selector)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int nsp_get_group_pins(struct pinctrl_dev *pctrl_dev,
+			      unsigned int selector, const unsigned int **pins,
+			      unsigned int *num_pins)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void nsp_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+			     struct seq_file *s, unsigned int offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static const struct pinctrl_ops nsp_pinctrl_ops = {
+	.get_groups_count = nsp_get_groups_count,
+	.get_group_name = nsp_get_group_name,
+	.get_group_pins = nsp_get_group_pins,
+	.pin_dbg_show = nsp_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int nsp_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *nsp_get_function_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned int selector)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int nsp_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				   unsigned int selector,
+				   const char * const **groups,
+				   unsigned * const num_groups)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int nsp_pinmux_set(struct nsp_pinctrl *pinctrl,
+			  const struct nsp_pin_function *func,
+			  const struct nsp_pin_group *grp,
+			  struct nsp_mux_log *mux_log)
+{
+	const struct nsp_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	for (i = 0; i < pinctrl->num_groups; i++) {
+		if ((mux->shift != mux_log[i].mux.shift) ||
+			(mux->base != mux_log[i].mux.base))
+			continue;
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+	if (i == pinctrl->num_groups)
+		return -EINVAL;
+
+	mask = mux->mask;
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	switch (mux->base) {
+	case NSP_MUX_BASE0:
+		base_address = pinctrl->base0;
+		break;
+
+	case NSP_MUX_BASE1:
+		base_address = pinctrl->base1;
+		break;
+
+	case NSP_MUX_BASE2:
+		base_address = pinctrl->base2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, base_address);
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int nsp_pinmux_enable(struct pinctrl_dev *pctrl_dev,
+			     unsigned int func_select, unsigned int grp_select)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct nsp_pin_function *func;
+	const struct nsp_pin_group *grp;
+
+	if (grp_select >= pinctrl->num_groups ||
+	    func_select >= pinctrl->num_functions)
+		return -EINVAL;
+
+	func = &pinctrl->functions[func_select];
+	grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "shift:%u alt:%u\n", grp->mux.shift,
+		grp->mux.alt);
+
+	return nsp_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+
+static int nsp_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned int pin)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	u32 *gpio_select = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->base0);
+	if ((val & BIT(pin)) != (*gpio_select << pin)) {
+		val &= ~BIT(pin);
+		val |= *gpio_select << pin;
+		writel(val, pinctrl->base0);
+	}
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static void nsp_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
+				  struct pinctrl_gpio_range *range,
+				  unsigned int pin)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	u32 *gpio_select = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->base0);
+	if ((val & (1 << pin)) == (*gpio_select << pin)) {
+		val &= ~(1 << pin);
+		if (!(*gpio_select))
+			val |= (1 << pin);
+		writel(val, pinctrl->base0);
+	}
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+}
+
+static const struct pinmux_ops nsp_pinmux_ops = {
+	.get_functions_count = nsp_get_functions_count,
+	.get_function_name = nsp_get_function_name,
+	.get_function_groups = nsp_get_function_groups,
+	.set_mux = nsp_pinmux_enable,
+	.gpio_request_enable = nsp_gpio_request_enable,
+	.gpio_disable_free = nsp_gpio_disable_free,
+};
+
+static struct pinctrl_desc nsp_pinctrl_desc = {
+	.name = "nsp-pinmux",
+	.pctlops = &nsp_pinctrl_ops,
+	.pmxops = &nsp_pinmux_ops,
+};
+
+static int nsp_mux_log_init(struct nsp_pinctrl *pinctrl)
+{
+	struct nsp_mux_log *log;
+	unsigned int i;
+	u32 no_of_groups = ARRAY_SIZE(nsp_pin_groups);
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, no_of_groups,
+					sizeof(struct nsp_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	for (i = 0; i < no_of_groups; i++) {
+		log = &pinctrl->mux_log[i];
+		log->mux.base = nsp_pin_groups[i].mux.base;
+		log->mux.shift = nsp_pin_groups[i].mux.shift;
+		log->mux.alt = 0;
+		log->is_configured = false;
+	}
+
+	return 0;
+}
+
+static int nsp_pinmux_probe(struct platform_device *pdev)
+{
+	struct nsp_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned int num_pins = ARRAY_SIZE(nsp_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0))
+		return PTR_ERR(pinctrl->base0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -EINVAL;
+	pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start,
+					      resource_size(res));
+	if (!pinctrl->base1) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	pinctrl->base2 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base2))
+		return PTR_ERR(pinctrl->base2);
+
+	ret = nsp_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = nsp_pins[i].pin;
+		pins[i].name = nsp_pins[i].name;
+		pins[i].drv_data = &nsp_pins[i].gpio_select;
+	}
+
+	pinctrl->groups = nsp_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(nsp_pin_groups);
+	pinctrl->functions = nsp_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(nsp_pin_functions);
+	nsp_pinctrl_desc.pins = pins;
+	nsp_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = devm_pinctrl_register(&pdev->dev, &nsp_pinctrl_desc,
+					 pinctrl);
+	if (IS_ERR(pinctrl->pctl)) {
+		dev_err(&pdev->dev, "unable to register nsp IOMUX pinctrl\n");
+		return PTR_ERR(pinctrl->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_pinmux_of_match[] = {
+	{ .compatible = "brcm,nsp-pinmux" },
+	{ }
+};
+
+static struct platform_driver nsp_pinmux_driver = {
+	.driver = {
+		.name = "nsp-pinmux",
+		.of_match_table = nsp_pinmux_of_match,
+	},
+	.probe = nsp_pinmux_probe,
+};
+
+static int __init nsp_pinmux_init(void)
+{
+	return platform_driver_register(&nsp_pinmux_driver);
+}
+arch_initcall(nsp_pinmux_init);