[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig
new file mode 100644
index 0000000..e8c4e4f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/bcm/Kconfig
@@ -0,0 +1,117 @@
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+ bool "Broadcom BCM281xx pinctrl driver"
+ depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select REGMAP_MMIO
+ default ARCH_BCM_MOBILE
+ help
+ Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+ for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+ BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
+ framework. GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+ bool
+ select PINMUX
+ select PINCONF
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_IPROC_GPIO
+ bool "Broadcom iProc GPIO (with PINCONF) driver"
+ depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
+ select PINCONF
+ select GENERIC_PINCONF
+ default ARCH_BCM_IPROC
+ help
+ Say yes here to enable the Broadcom iProc GPIO driver.
+
+ The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+ same GPIO Controller IP hence this driver could be used for all.
+
+ The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
+ GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
+ the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
+ supported by this driver.
+
+ The Broadcom NSP has two GPIO controllers including the ChipcommonA
+ GPIO, the ChipcommonB GPIO. Later controller is supported by this
+ driver.
+
+ The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+ the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+ The Broadcom Stingray GPIO controllers are supported by this driver.
+
+ All above SoCs GPIO controllers support basic PINCONF functions such
+ as bias pull up, pull down, and drive strength configurations, when
+ these pins are muxed to GPIO.
+
+ It provides the framework where pins from the individual GPIO can be
+ individually muxed to GPIO function, through interaction with the
+ SoCs IOMUX controller. This features could be used only on SoCs which
+ support individual pin muxing.
+
+config PINCTRL_CYGNUS_MUX
+ bool "Broadcom Cygnus IOMUX driver"
+ depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARCH_BCM_CYGNUS
+ help
+ Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+ The Broadcom Cygnus IOMUX driver supports group based IOMUX
+ configuration, with the exception that certain individual pins
+ can be overridden to GPIO function
+
+config PINCTRL_NSP_GPIO
+ bool "Broadcom NSP GPIO (with PINCONF) driver"
+ depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
+ select PINCONF
+ select GENERIC_PINCONF
+ default ARCH_BCM_NSP
+ help
+ Say yes here to enable the Broadcom NSP GPIO driver.
+
+ The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+ supported by this driver.
+
+ The ChipcommonA GPIO controller support basic PINCONF functions such
+ as bias pull up, pull down, and drive strength configurations, when
+ these pins are muxed to GPIO.
+
+config PINCTRL_NS2_MUX
+ bool "Broadcom Northstar2 pinmux driver"
+ depends on OF
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARM64 && ARCH_BCM_IPROC
+ help
+ Say yes here to enable the Broadcom NS2 MUX driver.
+
+ The Broadcom Northstar2 IOMUX driver supports group based IOMUX
+ configuration.
+
+config PINCTRL_NSP_MUX
+ bool "Broadcom NSP IOMUX driver"
+ depends on (ARCH_BCM_NSP || COMPILE_TEST)
+ depends on OF
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARCH_BCM_NSP
+ help
+ Say yes here to enable the Broadcom NSP SOC IOMUX driver.
+
+ The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX
+ configuration, with certain individual pins can be overridden
+ to GPIO function.