[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/pinctrl/samsung/pinctrl-samsung.h b/src/kernel/linux/v4.14/drivers/pinctrl/samsung/pinctrl-samsung.h
new file mode 100644
index 0000000..ae932e0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -0,0 +1,342 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_SAMSUNG_H
+#define __PINCTRL_SAMSUNG_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+#include <linux/gpio.h>
+
+/**
+ * enum pincfg_type - possible pin configuration types supported.
+ * @PINCFG_TYPE_FUNC: Function configuration.
+ * @PINCFG_TYPE_DAT: Pin value configuration.
+ * @PINCFG_TYPE_PUD: Pull up/down configuration.
+ * @PINCFG_TYPE_DRV: Drive strength configuration.
+ * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
+ * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
+ */
+enum pincfg_type {
+ PINCFG_TYPE_FUNC,
+ PINCFG_TYPE_DAT,
+ PINCFG_TYPE_PUD,
+ PINCFG_TYPE_DRV,
+ PINCFG_TYPE_CON_PDN,
+ PINCFG_TYPE_PUD_PDN,
+
+ PINCFG_TYPE_NUM
+};
+
+/*
+ * pin configuration (pull up/down and drive strength) type and its value are
+ * packed together into a 16-bits. The upper 8-bits represent the configuration
+ * type and the lower 8-bits hold the value of the configuration type.
+ */
+#define PINCFG_TYPE_MASK 0xFF
+#define PINCFG_VALUE_SHIFT 8
+#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
+#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
+#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
+#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
+ PINCFG_VALUE_SHIFT)
+/**
+ * enum eint_type - possible external interrupt types.
+ * @EINT_TYPE_NONE: bank does not support external interrupts
+ * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
+ * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
+ *
+ * Samsung GPIO controller groups all the available pins into banks. The pins
+ * in a pin bank can support external gpio interrupts or external wakeup
+ * interrupts or no interrupts at all. From a software perspective, the only
+ * difference between external gpio and external wakeup interrupts is that
+ * the wakeup interrupts can additionally wakeup the system if it is in
+ * suspended state.
+ */
+enum eint_type {
+ EINT_TYPE_NONE,
+ EINT_TYPE_GPIO,
+ EINT_TYPE_WKUP,
+ EINT_TYPE_WKUP_MUX,
+};
+
+/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
+#define PIN_NAME_LENGTH 10
+
+#define PIN_GROUP(n, p, f) \
+ { \
+ .name = n, \
+ .pins = p, \
+ .num_pins = ARRAY_SIZE(p), \
+ .func = f \
+ }
+
+#define PMX_FUNC(n, g) \
+ { \
+ .name = n, \
+ .groups = g, \
+ .num_groups = ARRAY_SIZE(g), \
+ }
+
+struct samsung_pinctrl_drv_data;
+
+/**
+ * struct samsung_pin_bank_type: pin bank type description
+ * @fld_width: widths of configuration bitfields (0 if unavailable)
+ * @reg_offset: offsets of configuration registers (don't care of width is 0)
+ */
+struct samsung_pin_bank_type {
+ u8 fld_width[PINCFG_TYPE_NUM];
+ u8 reg_offset[PINCFG_TYPE_NUM];
+};
+
+/**
+ * struct samsung_pin_bank_data: represent a controller pin-bank (init data).
+ * @type: type of the bank (register offsets and bitfield widths)
+ * @pctl_offset: starting offset of the pin-bank registers.
+ * @pctl_res_idx: index of base address for pin-bank registers.
+ * @nr_pins: number of pins included in this bank.
+ * @eint_func: function to set in CON register to configure pin as EINT.
+ * @eint_type: type of the external interrupt supported by the bank.
+ * @eint_mask: bit mask of pins which support EINT function.
+ * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ */
+struct samsung_pin_bank_data {
+ const struct samsung_pin_bank_type *type;
+ u32 pctl_offset;
+ u8 pctl_res_idx;
+ u8 nr_pins;
+ u8 eint_func;
+ enum eint_type eint_type;
+ u32 eint_mask;
+ u32 eint_offset;
+ const char *name;
+};
+
+/**
+ * struct samsung_pin_bank: represent a controller pin-bank.
+ * @type: type of the bank (register offsets and bitfield widths)
+ * @pctl_base: base address of the pin-bank registers
+ * @pctl_offset: starting offset of the pin-bank registers.
+ * @nr_pins: number of pins included in this bank.
+ * @eint_base: base address of the pin-bank EINT registers.
+ * @eint_func: function to set in CON register to configure pin as EINT.
+ * @eint_type: type of the external interrupt supported by the bank.
+ * @eint_mask: bit mask of pins which support EINT function.
+ * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ * @pin_base: starting pin number of the bank.
+ * @soc_priv: per-bank private data for SoC-specific code.
+ * @of_node: OF node of the bank.
+ * @drvdata: link to controller driver data
+ * @irq_domain: IRQ domain of the bank.
+ * @gpio_chip: GPIO chip of the bank.
+ * @grange: linux gpio pin range supported by this bank.
+ * @irq_chip: link to irq chip for external gpio and wakeup interrupts.
+ * @slock: spinlock protecting bank registers
+ * @pm_save: saved register values during suspend
+ */
+struct samsung_pin_bank {
+ const struct samsung_pin_bank_type *type;
+ void __iomem *pctl_base;
+ u32 pctl_offset;
+ u8 nr_pins;
+ void __iomem *eint_base;
+ u8 eint_func;
+ enum eint_type eint_type;
+ u32 eint_mask;
+ u32 eint_offset;
+ const char *name;
+
+ u32 pin_base;
+ void *soc_priv;
+ struct device_node *of_node;
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct irq_domain *irq_domain;
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range grange;
+ struct exynos_irq_chip *irq_chip;
+ spinlock_t slock;
+
+ u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/
+};
+
+/**
+ * struct samsung_retention_data: runtime pin-bank retention control data.
+ * @regs: array of PMU registers to control pad retention.
+ * @nr_regs: number of registers in @regs array.
+ * @value: value to store to registers to turn off retention.
+ * @refcnt: atomic counter if retention control affects more than one bank.
+ * @priv: retention control code private data
+ * @enable: platform specific callback to enter retention mode.
+ * @disable: platform specific callback to exit retention mode.
+ **/
+struct samsung_retention_ctrl {
+ const u32 *regs;
+ int nr_regs;
+ u32 value;
+ atomic_t *refcnt;
+ void *priv;
+ void (*enable)(struct samsung_pinctrl_drv_data *);
+ void (*disable)(struct samsung_pinctrl_drv_data *);
+};
+
+/**
+ * struct samsung_retention_data: represent a pin-bank retention control data.
+ * @regs: array of PMU registers to control pad retention.
+ * @nr_regs: number of registers in @regs array.
+ * @value: value to store to registers to turn off retention.
+ * @refcnt: atomic counter if retention control affects more than one bank.
+ * @init: platform specific callback to initialize retention control.
+ **/
+struct samsung_retention_data {
+ const u32 *regs;
+ int nr_regs;
+ u32 value;
+ atomic_t *refcnt;
+ struct samsung_retention_ctrl *(*init)(struct samsung_pinctrl_drv_data *,
+ const struct samsung_retention_data *);
+};
+
+/**
+ * struct samsung_pin_ctrl: represent a pin controller.
+ * @pin_banks: list of pin banks included in this controller.
+ * @nr_banks: number of pin banks.
+ * @nr_ext_resources: number of the extra base address for pin banks.
+ * @retention_data: configuration data for retention control.
+ * @eint_gpio_init: platform specific callback to setup the external gpio
+ * interrupts for the controller.
+ * @eint_wkup_init: platform specific callback to setup the external wakeup
+ * interrupts for the controller.
+ */
+struct samsung_pin_ctrl {
+ const struct samsung_pin_bank_data *pin_banks;
+ unsigned int nr_banks;
+ unsigned int nr_ext_resources;
+ const struct samsung_retention_data *retention_data;
+
+ int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
+ int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
+ void (*suspend)(struct samsung_pinctrl_drv_data *);
+ void (*resume)(struct samsung_pinctrl_drv_data *);
+};
+
+/**
+ * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
+ * @node: global list node
+ * @virt_base: register base address of the controller; this will be equal
+ * to each bank samsung_pin_bank->pctl_base and used on legacy
+ * platforms (like S3C24XX or S3C64XX) which has to access the base
+ * through samsung_pinctrl_drv_data, not samsung_pin_bank).
+ * @dev: device instance representing the controller.
+ * @irq: interrpt number used by the controller to notify gpio interrupts.
+ * @ctrl: pin controller instance managed by the driver.
+ * @pctl: pin controller descriptor registered with the pinctrl subsystem.
+ * @pctl_dev: cookie representing pinctrl device instance.
+ * @pin_groups: list of pin groups available to the driver.
+ * @nr_groups: number of such pin groups.
+ * @pmx_functions: list of pin functions available to the driver.
+ * @nr_function: number of such pin functions.
+ * @pin_base: starting system wide pin number.
+ * @nr_pins: number of pins supported by the controller.
+ * @retention_ctrl: retention control runtime data.
+ */
+struct samsung_pinctrl_drv_data {
+ struct list_head node;
+ void __iomem *virt_base;
+ struct device *dev;
+ int irq;
+
+ struct pinctrl_desc pctl;
+ struct pinctrl_dev *pctl_dev;
+
+ const struct samsung_pin_group *pin_groups;
+ unsigned int nr_groups;
+ const struct samsung_pmx_func *pmx_functions;
+ unsigned int nr_functions;
+
+ struct samsung_pin_bank *pin_banks;
+ unsigned int nr_banks;
+ unsigned int pin_base;
+ unsigned int nr_pins;
+
+ struct samsung_retention_ctrl *retention_ctrl;
+
+ void (*suspend)(struct samsung_pinctrl_drv_data *);
+ void (*resume)(struct samsung_pinctrl_drv_data *);
+};
+
+/**
+ * struct samsung_pinctrl_of_match_data: OF match device specific configuration data.
+ * @ctrl: array of pin controller data.
+ * @num_ctrl: size of array @ctrl.
+ */
+struct samsung_pinctrl_of_match_data {
+ const struct samsung_pin_ctrl *ctrl;
+ unsigned int num_ctrl;
+};
+
+/**
+ * struct samsung_pin_group: represent group of pins of a pinmux function.
+ * @name: name of the pin group, used to lookup the group.
+ * @pins: the pins included in this group.
+ * @num_pins: number of pins included in this group.
+ * @func: the function number to be programmed when selected.
+ */
+struct samsung_pin_group {
+ const char *name;
+ const unsigned int *pins;
+ u8 num_pins;
+ u8 func;
+};
+
+/**
+ * struct samsung_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @num_groups: number of groups included in @groups.
+ */
+struct samsung_pmx_func {
+ const char *name;
+ const char **groups;
+ u8 num_groups;
+ u32 val;
+};
+
+/* list of all exported SoC specific data */
+extern const struct samsung_pinctrl_of_match_data exynos3250_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos4210_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos4x12_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos5250_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos5260_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos5410_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos5420_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos5433_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
+extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
+extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
+extern const struct samsung_pinctrl_of_match_data s3c2416_of_data;
+extern const struct samsung_pinctrl_of_match_data s3c2440_of_data;
+extern const struct samsung_pinctrl_of_match_data s3c2450_of_data;
+extern const struct samsung_pinctrl_of_match_data s5pv210_of_data;
+
+#endif /* __PINCTRL_SAMSUNG_H */