[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/power/avs/Kconfig b/src/kernel/linux/v4.14/drivers/power/avs/Kconfig
new file mode 100644
index 0000000..a67eeac
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/power/avs/Kconfig
@@ -0,0 +1,20 @@
+menuconfig POWER_AVS
+ bool "Adaptive Voltage Scaling class support"
+ help
+ AVS is a power management technique which finely controls the
+ operating voltage of a device in order to optimize (i.e. reduce)
+ its power consumption.
+ At a given operating point the voltage is adapted depending on
+ static factors (chip manufacturing process) and dynamic factors
+ (temperature depending performance).
+ AVS is also called SmartReflex on OMAP devices.
+
+ Say Y here to enable Adaptive Voltage Scaling class support.
+
+config ROCKCHIP_IODOMAIN
+ tristate "Rockchip IO domain support"
+ depends on POWER_AVS && ARCH_ROCKCHIP && OF
+ help
+ Say y here to enable support io domains on Rockchip SoCs. It is
+ necessary for the io domain setting of the SoC to match the
+ voltage supplied by the regulators.
diff --git a/src/kernel/linux/v4.14/drivers/power/avs/Makefile b/src/kernel/linux/v4.14/drivers/power/avs/Makefile
new file mode 100644
index 0000000..ba4c7bc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/power/avs/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
+obj-$(CONFIG_ROCKCHIP_IODOMAIN) += rockchip-io-domain.o
diff --git a/src/kernel/linux/v4.14/drivers/power/avs/rockchip-io-domain.c b/src/kernel/linux/v4.14/drivers/power/avs/rockchip-io-domain.c
new file mode 100644
index 0000000..75f63e3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/power/avs/rockchip-io-domain.c
@@ -0,0 +1,570 @@
+/*
+ * Rockchip IO Voltage Domain driver
+ *
+ * Copyright 2014 MundoReader S.L.
+ * Copyright 2014 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define MAX_SUPPLIES 16
+
+/*
+ * The max voltage for 1.8V and 3.3V come from the Rockchip datasheet under
+ * "Recommended Operating Conditions" for "Digital GPIO". When the typical
+ * is 3.3V the max is 3.6V. When the typical is 1.8V the max is 1.98V.
+ *
+ * They are used like this:
+ * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the
+ * SoC we're at 3.3.
+ * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider
+ * that to be an error.
+ */
+#define MAX_VOLTAGE_1_8 1980000
+#define MAX_VOLTAGE_3_3 3600000
+
+#define RK3288_SOC_CON2 0x24c
+#define RK3288_SOC_CON2_FLASH0 BIT(7)
+#define RK3288_SOC_FLASH_SUPPLY_NUM 2
+
+#define RK3328_SOC_CON4 0x410
+#define RK3328_SOC_CON4_VCCIO2 BIT(7)
+#define RK3328_SOC_VCCIO2_SUPPLY_NUM 1
+
+#define RK3368_SOC_CON15 0x43c
+#define RK3368_SOC_CON15_FLASH0 BIT(14)
+#define RK3368_SOC_FLASH_SUPPLY_NUM 2
+
+#define RK3399_PMUGRF_CON0 0x180
+#define RK3399_PMUGRF_CON0_VSEL BIT(8)
+#define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9
+
+struct rockchip_iodomain;
+
+/**
+ * @supplies: voltage settings matching the register bits.
+ */
+struct rockchip_iodomain_soc_data {
+ int grf_offset;
+ const char *supply_names[MAX_SUPPLIES];
+ void (*init)(struct rockchip_iodomain *iod);
+};
+
+struct rockchip_iodomain_supply {
+ struct rockchip_iodomain *iod;
+ struct regulator *reg;
+ struct notifier_block nb;
+ int idx;
+};
+
+struct rockchip_iodomain {
+ struct device *dev;
+ struct regmap *grf;
+ struct rockchip_iodomain_soc_data *soc_data;
+ struct rockchip_iodomain_supply supplies[MAX_SUPPLIES];
+};
+
+static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply,
+ int uV)
+{
+ struct rockchip_iodomain *iod = supply->iod;
+ u32 val;
+ int ret;
+
+ /* set value bit */
+ val = (uV > MAX_VOLTAGE_1_8) ? 0 : 1;
+ val <<= supply->idx;
+
+ /* apply hiword-mask */
+ val |= (BIT(supply->idx) << 16);
+
+ ret = regmap_write(iod->grf, iod->soc_data->grf_offset, val);
+ if (ret)
+ dev_err(iod->dev, "Couldn't write to GRF\n");
+
+ return ret;
+}
+
+static int rockchip_iodomain_notify(struct notifier_block *nb,
+ unsigned long event,
+ void *data)
+{
+ struct rockchip_iodomain_supply *supply =
+ container_of(nb, struct rockchip_iodomain_supply, nb);
+ int uV;
+ int ret;
+
+ /*
+ * According to Rockchip it's important to keep the SoC IO domain
+ * higher than (or equal to) the external voltage. That means we need
+ * to change it before external voltage changes happen in the case
+ * of an increase.
+ *
+ * Note that in the "pre" change we pick the max possible voltage that
+ * the regulator might end up at (the client requests a range and we
+ * don't know for certain the exact voltage). Right now we rely on the
+ * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
+ * request something like a max of 3.6V when they really want 3.3V.
+ * We could attempt to come up with better rules if this fails.
+ */
+ if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
+ struct pre_voltage_change_data *pvc_data = data;
+
+ uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
+ } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
+ REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
+ uV = (unsigned long)data;
+ } else {
+ return NOTIFY_OK;
+ }
+
+ dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
+
+ if (uV > MAX_VOLTAGE_3_3) {
+ dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
+
+ if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+ return NOTIFY_BAD;
+ }
+
+ ret = rockchip_iodomain_write(supply, uV);
+ if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+ return NOTIFY_BAD;
+
+ dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
+ return NOTIFY_OK;
+}
+
+static void rk3288_iodomain_init(struct rockchip_iodomain *iod)
+{
+ int ret;
+ u32 val;
+
+ /* if no flash supply we should leave things alone */
+ if (!iod->supplies[RK3288_SOC_FLASH_SUPPLY_NUM].reg)
+ return;
+
+ /*
+ * set flash0 iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ val = RK3288_SOC_CON2_FLASH0 | (RK3288_SOC_CON2_FLASH0 << 16);
+ ret = regmap_write(iod->grf, RK3288_SOC_CON2, val);
+ if (ret < 0)
+ dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
+static void rk3328_iodomain_init(struct rockchip_iodomain *iod)
+{
+ int ret;
+ u32 val;
+
+ /* if no vccio2 supply we should leave things alone */
+ if (!iod->supplies[RK3328_SOC_VCCIO2_SUPPLY_NUM].reg)
+ return;
+
+ /*
+ * set vccio2 iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ val = RK3328_SOC_CON4_VCCIO2 | (RK3328_SOC_CON4_VCCIO2 << 16);
+ ret = regmap_write(iod->grf, RK3328_SOC_CON4, val);
+ if (ret < 0)
+ dev_warn(iod->dev, "couldn't update vccio2 vsel ctrl\n");
+}
+
+static void rk3368_iodomain_init(struct rockchip_iodomain *iod)
+{
+ int ret;
+ u32 val;
+
+ /* if no flash supply we should leave things alone */
+ if (!iod->supplies[RK3368_SOC_FLASH_SUPPLY_NUM].reg)
+ return;
+
+ /*
+ * set flash0 iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ val = RK3368_SOC_CON15_FLASH0 | (RK3368_SOC_CON15_FLASH0 << 16);
+ ret = regmap_write(iod->grf, RK3368_SOC_CON15, val);
+ if (ret < 0)
+ dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
+static void rk3399_pmu_iodomain_init(struct rockchip_iodomain *iod)
+{
+ int ret;
+ u32 val;
+
+ /* if no pmu io supply we should leave things alone */
+ if (!iod->supplies[RK3399_PMUGRF_VSEL_SUPPLY_NUM].reg)
+ return;
+
+ /*
+ * set pmu io iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ val = RK3399_PMUGRF_CON0_VSEL | (RK3399_PMUGRF_CON0_VSEL << 16);
+ ret = regmap_write(iod->grf, RK3399_PMUGRF_CON0, val);
+ if (ret < 0)
+ dev_warn(iod->dev, "couldn't update pmu io iodomain ctrl\n");
+}
+
+/*
+ * On the rk3188 the io-domains are handled by a shared register with the
+ * lower 8 bits being still being continuing drive-strength settings.
+ */
+static const struct rockchip_iodomain_soc_data soc_data_rk3188 = {
+ .grf_offset = 0x104,
+ .supply_names = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "ap0",
+ "ap1",
+ "cif",
+ "flash",
+ "vccio0",
+ "vccio1",
+ "lcdc0",
+ "lcdc1",
+ },
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3228 = {
+ .grf_offset = 0x418,
+ .supply_names = {
+ "vccio1",
+ "vccio2",
+ "vccio3",
+ "vccio4",
+ },
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3288 = {
+ .grf_offset = 0x380,
+ .supply_names = {
+ "lcdc", /* LCDC_VDD */
+ "dvp", /* DVPIO_VDD */
+ "flash0", /* FLASH0_VDD (emmc) */
+ "flash1", /* FLASH1_VDD (sdio1) */
+ "wifi", /* APIO3_VDD (sdio0) */
+ "bb", /* APIO5_VDD */
+ "audio", /* APIO4_VDD */
+ "sdcard", /* SDMMC0_VDD (sdmmc) */
+ "gpio30", /* APIO1_VDD */
+ "gpio1830", /* APIO2_VDD */
+ },
+ .init = rk3288_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3328 = {
+ .grf_offset = 0x410,
+ .supply_names = {
+ "vccio1",
+ "vccio2",
+ "vccio3",
+ "vccio4",
+ "vccio5",
+ "vccio6",
+ "pmuio",
+ },
+ .init = rk3328_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3368 = {
+ .grf_offset = 0x900,
+ .supply_names = {
+ NULL, /* reserved */
+ "dvp", /* DVPIO_VDD */
+ "flash0", /* FLASH0_VDD (emmc) */
+ "wifi", /* APIO2_VDD (sdio0) */
+ NULL,
+ "audio", /* APIO3_VDD */
+ "sdcard", /* SDMMC0_VDD (sdmmc) */
+ "gpio30", /* APIO1_VDD */
+ "gpio1830", /* APIO4_VDD (gpujtag) */
+ },
+ .init = rk3368_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = {
+ .grf_offset = 0x100,
+ .supply_names = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "pmu", /*PMU IO domain*/
+ "vop", /*LCDC IO domain*/
+ },
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3399 = {
+ .grf_offset = 0xe640,
+ .supply_names = {
+ "bt656", /* APIO2_VDD */
+ "audio", /* APIO5_VDD */
+ "sdmmc", /* SDMMC0_VDD */
+ "gpio1830", /* APIO4_VDD */
+ },
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
+ .grf_offset = 0x180,
+ .supply_names = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "pmu1830", /* PMUIO2_VDD */
+ },
+ .init = rk3399_pmu_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rv1108 = {
+ .grf_offset = 0x404,
+ .supply_names = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "vccio1",
+ "vccio2",
+ "vccio3",
+ "vccio5",
+ "vccio6",
+ },
+
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rv1108_pmu = {
+ .grf_offset = 0x104,
+ .supply_names = {
+ "pmu",
+ },
+};
+
+static const struct of_device_id rockchip_iodomain_match[] = {
+ {
+ .compatible = "rockchip,rk3188-io-voltage-domain",
+ .data = (void *)&soc_data_rk3188
+ },
+ {
+ .compatible = "rockchip,rk3228-io-voltage-domain",
+ .data = (void *)&soc_data_rk3228
+ },
+ {
+ .compatible = "rockchip,rk3288-io-voltage-domain",
+ .data = (void *)&soc_data_rk3288
+ },
+ {
+ .compatible = "rockchip,rk3328-io-voltage-domain",
+ .data = (void *)&soc_data_rk3328
+ },
+ {
+ .compatible = "rockchip,rk3368-io-voltage-domain",
+ .data = (void *)&soc_data_rk3368
+ },
+ {
+ .compatible = "rockchip,rk3368-pmu-io-voltage-domain",
+ .data = (void *)&soc_data_rk3368_pmu
+ },
+ {
+ .compatible = "rockchip,rk3399-io-voltage-domain",
+ .data = (void *)&soc_data_rk3399
+ },
+ {
+ .compatible = "rockchip,rk3399-pmu-io-voltage-domain",
+ .data = (void *)&soc_data_rk3399_pmu
+ },
+ {
+ .compatible = "rockchip,rv1108-io-voltage-domain",
+ .data = (void *)&soc_data_rv1108
+ },
+ {
+ .compatible = "rockchip,rv1108-pmu-io-voltage-domain",
+ .data = (void *)&soc_data_rv1108_pmu
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_iodomain_match);
+
+static int rockchip_iodomain_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ struct rockchip_iodomain *iod;
+ struct device *parent;
+ int i, ret = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ iod = devm_kzalloc(&pdev->dev, sizeof(*iod), GFP_KERNEL);
+ if (!iod)
+ return -ENOMEM;
+
+ iod->dev = &pdev->dev;
+ platform_set_drvdata(pdev, iod);
+
+ match = of_match_node(rockchip_iodomain_match, np);
+ iod->soc_data = (struct rockchip_iodomain_soc_data *)match->data;
+
+ parent = pdev->dev.parent;
+ if (parent && parent->of_node) {
+ iod->grf = syscon_node_to_regmap(parent->of_node);
+ } else {
+ dev_dbg(&pdev->dev, "falling back to old binding\n");
+ iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ }
+
+ if (IS_ERR(iod->grf)) {
+ dev_err(&pdev->dev, "couldn't find grf regmap\n");
+ return PTR_ERR(iod->grf);
+ }
+
+ for (i = 0; i < MAX_SUPPLIES; i++) {
+ const char *supply_name = iod->soc_data->supply_names[i];
+ struct rockchip_iodomain_supply *supply = &iod->supplies[i];
+ struct regulator *reg;
+ int uV;
+
+ if (!supply_name)
+ continue;
+
+ reg = devm_regulator_get_optional(iod->dev, supply_name);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+
+ /* If a supply wasn't specified, that's OK */
+ if (ret == -ENODEV)
+ continue;
+ else if (ret != -EPROBE_DEFER)
+ dev_err(iod->dev, "couldn't get regulator %s\n",
+ supply_name);
+ goto unreg_notify;
+ }
+
+ /* set initial correct value */
+ uV = regulator_get_voltage(reg);
+
+ /* must be a regulator we can get the voltage of */
+ if (uV < 0) {
+ dev_err(iod->dev, "Can't determine voltage: %s\n",
+ supply_name);
+ goto unreg_notify;
+ }
+
+ if (uV > MAX_VOLTAGE_3_3) {
+ dev_crit(iod->dev,
+ "%d uV is too high. May damage SoC!\n",
+ uV);
+ ret = -EINVAL;
+ goto unreg_notify;
+ }
+
+ /* setup our supply */
+ supply->idx = i;
+ supply->iod = iod;
+ supply->reg = reg;
+ supply->nb.notifier_call = rockchip_iodomain_notify;
+
+ ret = rockchip_iodomain_write(supply, uV);
+ if (ret) {
+ supply->reg = NULL;
+ goto unreg_notify;
+ }
+
+ /* register regulator notifier */
+ ret = regulator_register_notifier(reg, &supply->nb);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "regulator notifier request failed\n");
+ supply->reg = NULL;
+ goto unreg_notify;
+ }
+ }
+
+ if (iod->soc_data->init)
+ iod->soc_data->init(iod);
+
+ return 0;
+
+unreg_notify:
+ for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+ struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+ if (io_supply->reg)
+ regulator_unregister_notifier(io_supply->reg,
+ &io_supply->nb);
+ }
+
+ return ret;
+}
+
+static int rockchip_iodomain_remove(struct platform_device *pdev)
+{
+ struct rockchip_iodomain *iod = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+ struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+ if (io_supply->reg)
+ regulator_unregister_notifier(io_supply->reg,
+ &io_supply->nb);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rockchip_iodomain_driver = {
+ .probe = rockchip_iodomain_probe,
+ .remove = rockchip_iodomain_remove,
+ .driver = {
+ .name = "rockchip-iodomain",
+ .of_match_table = rockchip_iodomain_match,
+ },
+};
+
+module_platform_driver(rockchip_iodomain_driver);
+
+MODULE_DESCRIPTION("Rockchip IO-domain driver");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/power/avs/smartreflex.c b/src/kernel/linux/v4.14/drivers/power/avs/smartreflex.c
new file mode 100644
index 0000000..4b6fddc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/power/avs/smartreflex.c
@@ -0,0 +1,1070 @@
+/*
+ * OMAP SmartReflex Voltage Control
+ *
+ * Author: Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/power/smartreflex.h>
+
+#define DRIVER_NAME "smartreflex"
+#define SMARTREFLEX_NAME_LEN 32
+#define NVALUE_NAME_LEN 40
+#define SR_DISABLE_TIMEOUT 200
+
+/* sr_list contains all the instances of smartreflex module */
+static LIST_HEAD(sr_list);
+
+static struct omap_sr_class_data *sr_class;
+static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry *sr_dbg_dir;
+
+static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
+{
+ __raw_writel(value, (sr->base + offset));
+}
+
+static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
+ u32 value)
+{
+ u32 reg_val;
+
+ /*
+ * Smartreflex error config register is special as it contains
+ * certain status bits which if written a 1 into means a clear
+ * of those bits. So in order to make sure no accidental write of
+ * 1 happens to those status bits, do a clear of them in the read
+ * value. This mean this API doesn't rewrite values in these bits
+ * if they are currently set, but does allow the caller to write
+ * those bits.
+ */
+ if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
+ mask |= ERRCONFIG_STATUS_V1_MASK;
+ else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
+ mask |= ERRCONFIG_VPBOUNDINTST_V2;
+
+ reg_val = __raw_readl(sr->base + offset);
+ reg_val &= ~mask;
+
+ value &= mask;
+
+ reg_val |= value;
+
+ __raw_writel(reg_val, (sr->base + offset));
+}
+
+static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
+{
+ return __raw_readl(sr->base + offset);
+}
+
+static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
+{
+ struct omap_sr *sr_info;
+
+ if (!voltdm) {
+ pr_err("%s: Null voltage domain passed!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ list_for_each_entry(sr_info, &sr_list, node) {
+ if (voltdm == sr_info->voltdm)
+ return sr_info;
+ }
+
+ return ERR_PTR(-ENODATA);
+}
+
+static irqreturn_t sr_interrupt(int irq, void *data)
+{
+ struct omap_sr *sr_info = data;
+ u32 status = 0;
+
+ switch (sr_info->ip_type) {
+ case SR_TYPE_V1:
+ /* Read the status bits */
+ status = sr_read_reg(sr_info, ERRCONFIG_V1);
+
+ /* Clear them by writing back */
+ sr_write_reg(sr_info, ERRCONFIG_V1, status);
+ break;
+ case SR_TYPE_V2:
+ /* Read the status bits */
+ status = sr_read_reg(sr_info, IRQSTATUS);
+
+ /* Clear them by writing back */
+ sr_write_reg(sr_info, IRQSTATUS, status);
+ break;
+ default:
+ dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
+ sr_info->ip_type);
+ return IRQ_NONE;
+ }
+
+ if (sr_class->notify)
+ sr_class->notify(sr_info, status);
+
+ return IRQ_HANDLED;
+}
+
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+ struct clk *fck;
+ u32 fclk_speed;
+
+ fck = clk_get(&sr->pdev->dev, "fck");
+
+ if (IS_ERR(fck)) {
+ dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
+ __func__, dev_name(&sr->pdev->dev));
+ return;
+ }
+
+ fclk_speed = clk_get_rate(fck);
+ clk_put(fck);
+
+ switch (fclk_speed) {
+ case 12000000:
+ sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+ break;
+ case 13000000:
+ sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+ break;
+ case 19200000:
+ sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+ break;
+ case 26000000:
+ sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+ break;
+ case 38400000:
+ sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Invalid fclk rate: %d\n",
+ __func__, fclk_speed);
+ break;
+ }
+}
+
+static void sr_start_vddautocomp(struct omap_sr *sr)
+{
+ if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+ dev_warn(&sr->pdev->dev,
+ "%s: smartreflex class driver not registered\n",
+ __func__);
+ return;
+ }
+
+ if (!sr_class->enable(sr))
+ sr->autocomp_active = true;
+}
+
+static void sr_stop_vddautocomp(struct omap_sr *sr)
+{
+ if (!sr_class || !(sr_class->disable)) {
+ dev_warn(&sr->pdev->dev,
+ "%s: smartreflex class driver not registered\n",
+ __func__);
+ return;
+ }
+
+ if (sr->autocomp_active) {
+ sr_class->disable(sr, 1);
+ sr->autocomp_active = false;
+ }
+}
+
+/*
+ * This function handles the initializations which have to be done
+ * only when both sr device and class driver regiter has
+ * completed. This will be attempted to be called from both sr class
+ * driver register and sr device intializtion API's. Only one call
+ * will ultimately succeed.
+ *
+ * Currently this function registers interrupt handler for a particular SR
+ * if smartreflex class driver is already registered and has
+ * requested for interrupts and the SR interrupt line in present.
+ */
+static int sr_late_init(struct omap_sr *sr_info)
+{
+ struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
+ int ret = 0;
+
+ if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
+ ret = devm_request_irq(&sr_info->pdev->dev, sr_info->irq,
+ sr_interrupt, 0, sr_info->name, sr_info);
+ if (ret)
+ goto error;
+ disable_irq(sr_info->irq);
+ }
+
+ if (pdata && pdata->enable_on_init)
+ sr_start_vddautocomp(sr_info);
+
+ return ret;
+
+error:
+ list_del(&sr_info->node);
+ dev_err(&sr_info->pdev->dev, "%s: ERROR in registering interrupt handler. Smartreflex will not function as desired\n",
+ __func__);
+
+ return ret;
+}
+
+static void sr_v1_disable(struct omap_sr *sr)
+{
+ int timeout = 0;
+ int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+ ERRCONFIG_MCUBOUNDINTST;
+
+ /* Enable MCUDisableAcknowledge interrupt */
+ sr_modify_reg(sr, ERRCONFIG_V1,
+ ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
+
+ /* SRCONFIG - disable SR */
+ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+ /* Disable all other SR interrupts and clear the status as needed */
+ if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
+ errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
+ sr_modify_reg(sr, ERRCONFIG_V1,
+ (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+ ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
+ errconf_val);
+
+ /*
+ * Wait for SR to be disabled.
+ * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
+ */
+ sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+ ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+ timeout);
+
+ if (timeout >= SR_DISABLE_TIMEOUT)
+ dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+ __func__);
+
+ /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+ sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
+ ERRCONFIG_MCUDISACKINTST);
+}
+
+static void sr_v2_disable(struct omap_sr *sr)
+{
+ int timeout = 0;
+
+ /* Enable MCUDisableAcknowledge interrupt */
+ sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
+
+ /* SRCONFIG - disable SR */
+ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+ /*
+ * Disable all other SR interrupts and clear the status
+ * write to status register ONLY on need basis - only if status
+ * is set.
+ */
+ if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
+ sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+ ERRCONFIG_VPBOUNDINTST_V2);
+ else
+ sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+ 0x0);
+ sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
+ IRQENABLE_MCUVALIDINT |
+ IRQENABLE_MCUBOUNDSINT));
+ sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
+ IRQSTATUS_MCVALIDINT |
+ IRQSTATUS_MCBOUNDSINT));
+
+ /*
+ * Wait for SR to be disabled.
+ * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
+ */
+ sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
+ IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+ timeout);
+
+ if (timeout >= SR_DISABLE_TIMEOUT)
+ dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+ __func__);
+
+ /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+ sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
+ sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
+}
+
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+ struct omap_sr *sr, u32 efuse_offs)
+{
+ int i;
+
+ if (!sr->nvalue_table) {
+ dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
+ __func__);
+ return NULL;
+ }
+
+ for (i = 0; i < sr->nvalue_count; i++) {
+ if (sr->nvalue_table[i].efuse_offs == efuse_offs)
+ return &sr->nvalue_table[i];
+ }
+
+ return NULL;
+}
+
+/* Public Functions */
+
+/**
+ * sr_configure_errgen() - Configures the SmartReflex to perform AVS using the
+ * error generator module.
+ * @sr: SR module to be configured.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the error generator module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_errgen(struct omap_sr *sr)
+{
+ u32 sr_config, sr_errconfig, errconfig_offs;
+ u32 vpboundint_en, vpboundint_st;
+ u32 senp_en = 0, senn_en = 0;
+ u8 senp_shift, senn_shift;
+
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n",
+ __func__, (void *)_RET_IP_);
+ return -EINVAL;
+ }
+
+ if (!sr->clk_length)
+ sr_set_clk_length(sr);
+
+ senp_en = sr->senp_mod;
+ senn_en = sr->senn_mod;
+
+ sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
+
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ sr_config |= SRCONFIG_DELAYCTRL;
+ senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+ senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+ errconfig_offs = ERRCONFIG_V1;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+ break;
+ case SR_TYPE_V2:
+ senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+ senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+ errconfig_offs = ERRCONFIG_V2;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+ sr_write_reg(sr, SRCONFIG, sr_config);
+ sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
+ (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
+ (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT);
+ sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
+ SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+ sr_errconfig);
+
+ /* Enabling the interrupts if the ERROR module is used */
+ sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
+ vpboundint_en);
+
+ return 0;
+}
+
+/**
+ * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
+ * @sr: SR module to be configured.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable the error generator module inside the smartreflex module.
+ *
+ * Returns 0 on success and error value in case of failure.
+ */
+int sr_disable_errgen(struct omap_sr *sr)
+{
+ u32 errconfig_offs;
+ u32 vpboundint_en, vpboundint_st;
+
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n",
+ __func__, (void *)_RET_IP_);
+ return -EINVAL;
+ }
+
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ errconfig_offs = ERRCONFIG_V1;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+ break;
+ case SR_TYPE_V2:
+ errconfig_offs = ERRCONFIG_V2;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Disable the Sensor and errorgen */
+ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
+
+ /*
+ * Disable the interrupts of ERROR module
+ * NOTE: modify is a read, modify,write - an implicit OCP barrier
+ * which is required is present here - sequencing is critical
+ * at this point (after errgen is disabled, vpboundint disable)
+ */
+ sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
+
+ return 0;
+}
+
+/**
+ * sr_configure_minmax() - Configures the SmartReflex to perform AVS using the
+ * minmaxavg module.
+ * @sr: SR module to be configured.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the minmaxavg module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_minmax(struct omap_sr *sr)
+{
+ u32 sr_config, sr_avgwt;
+ u32 senp_en = 0, senn_en = 0;
+ u8 senp_shift, senn_shift;
+
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n",
+ __func__, (void *)_RET_IP_);
+ return -EINVAL;
+ }
+
+ if (!sr->clk_length)
+ sr_set_clk_length(sr);
+
+ senp_en = sr->senp_mod;
+ senn_en = sr->senn_mod;
+
+ sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ SRCONFIG_SENENABLE |
+ (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
+
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ sr_config |= SRCONFIG_DELAYCTRL;
+ senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+ senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+ break;
+ case SR_TYPE_V2:
+ senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+ senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+ sr_write_reg(sr, SRCONFIG, sr_config);
+ sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
+ (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
+ sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
+
+ /*
+ * Enabling the interrupts if MINMAXAVG module is used.
+ * TODO: check if all the interrupts are mandatory
+ */
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ sr_modify_reg(sr, ERRCONFIG_V1,
+ (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+ ERRCONFIG_MCUBOUNDINTEN),
+ (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
+ ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
+ ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
+ break;
+ case SR_TYPE_V2:
+ sr_write_reg(sr, IRQSTATUS,
+ IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
+ IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
+ sr_write_reg(sr, IRQENABLE_SET,
+ IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
+ IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex module without specifying the ip\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * sr_enable() - Enables the smartreflex module.
+ * @sr: pointer to which the SR module to be configured belongs to.
+ * @volt: The voltage at which the Voltage domain associated with
+ * the smartreflex module is operating at.
+ * This is required only to program the correct Ntarget value.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * enable a smartreflex module. Returns 0 on success. Returns error
+ * value if the voltage passed is wrong or if ntarget value is wrong.
+ */
+int sr_enable(struct omap_sr *sr, unsigned long volt)
+{
+ struct omap_volt_data *volt_data;
+ struct omap_sr_nvalue_table *nvalue_row;
+ int ret;
+
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n",
+ __func__, (void *)_RET_IP_);
+ return -EINVAL;
+ }
+
+ volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
+
+ if (IS_ERR(volt_data)) {
+ dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table for nominal voltage %ld\n",
+ __func__, volt);
+ return PTR_ERR(volt_data);
+ }
+
+ nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
+
+ if (!nvalue_row) {
+ dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+ __func__, volt);
+ return -ENODATA;
+ }
+
+ /* errminlimit is opp dependent and hence linked to voltage */
+ sr->err_minlimit = nvalue_row->errminlimit;
+
+ pm_runtime_get_sync(&sr->pdev->dev);
+
+ /* Check if SR is already enabled. If yes do nothing */
+ if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
+ return 0;
+
+ /* Configure SR */
+ ret = sr_class->configure(sr);
+ if (ret)
+ return ret;
+
+ sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
+
+ /* SRCONFIG - enable SR */
+ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+ return 0;
+}
+
+/**
+ * sr_disable() - Disables the smartreflex module.
+ * @sr: pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable a smartreflex module.
+ */
+void sr_disable(struct omap_sr *sr)
+{
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n",
+ __func__, (void *)_RET_IP_);
+ return;
+ }
+
+ /* Check if SR clocks are already disabled. If yes do nothing */
+ if (pm_runtime_suspended(&sr->pdev->dev))
+ return;
+
+ /*
+ * Disable SR if only it is indeed enabled. Else just
+ * disable the clocks.
+ */
+ if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ sr_v1_disable(sr);
+ break;
+ case SR_TYPE_V2:
+ sr_v2_disable(sr);
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
+ sr->ip_type);
+ }
+ }
+
+ pm_runtime_put_sync_suspend(&sr->pdev->dev);
+}
+
+/**
+ * sr_register_class() - API to register a smartreflex class parameters.
+ * @class_data: The structure containing various sr class specific data.
+ *
+ * This API is to be called by the smartreflex class driver to register itself
+ * with the smartreflex driver during init. Returns 0 on success else the
+ * error value.
+ */
+int sr_register_class(struct omap_sr_class_data *class_data)
+{
+ struct omap_sr *sr_info;
+
+ if (!class_data) {
+ pr_warn("%s:, Smartreflex class data passed is NULL\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (sr_class) {
+ pr_warn("%s: Smartreflex class driver already registered\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ sr_class = class_data;
+
+ /*
+ * Call into late init to do initializations that require
+ * both sr driver and sr class driver to be initiallized.
+ */
+ list_for_each_entry(sr_info, &sr_list, node)
+ sr_late_init(sr_info);
+
+ return 0;
+}
+
+/**
+ * omap_sr_enable() - API to enable SR clocks and to call into the
+ * registered smartreflex class enable API.
+ * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to enable
+ * a particular smartreflex module. This API will do the initial
+ * configurations to turn on the smartreflex module and in turn call
+ * into the registered smartreflex class enable API.
+ */
+void omap_sr_enable(struct voltagedomain *voltdm)
+{
+ struct omap_sr *sr = _sr_lookup(voltdm);
+
+ if (IS_ERR(sr)) {
+ pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);
+ return;
+ }
+
+ if (!sr->autocomp_active)
+ return;
+
+ if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+ dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n",
+ __func__);
+ return;
+ }
+
+ sr_class->enable(sr);
+}
+
+/**
+ * omap_sr_disable() - API to disable SR without resetting the voltage
+ * processor voltage
+ * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable not to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable(struct voltagedomain *voltdm)
+{
+ struct omap_sr *sr = _sr_lookup(voltdm);
+
+ if (IS_ERR(sr)) {
+ pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);
+ return;
+ }
+
+ if (!sr->autocomp_active)
+ return;
+
+ if (!sr_class || !(sr_class->disable)) {
+ dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n",
+ __func__);
+ return;
+ }
+
+ sr_class->disable(sr, 0);
+}
+
+/**
+ * omap_sr_disable_reset_volt() - API to disable SR and reset the
+ * voltage processor voltage
+ * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
+{
+ struct omap_sr *sr = _sr_lookup(voltdm);
+
+ if (IS_ERR(sr)) {
+ pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);
+ return;
+ }
+
+ if (!sr->autocomp_active)
+ return;
+
+ if (!sr_class || !(sr_class->disable)) {
+ dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not registered\n",
+ __func__);
+ return;
+ }
+
+ sr_class->disable(sr, 1);
+}
+
+/**
+ * omap_sr_register_pmic() - API to register pmic specific info.
+ * @pmic_data: The structure containing pmic specific data.
+ *
+ * This API is to be called from the PMIC specific code to register with
+ * smartreflex driver pmic specific info. Currently the only info required
+ * is the smartreflex init on the PMIC side.
+ */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
+{
+ if (!pmic_data) {
+ pr_warn("%s: Trying to register NULL PMIC data structure with smartreflex\n",
+ __func__);
+ return;
+ }
+
+ sr_pmic_data = pmic_data;
+}
+
+/* PM Debug FS entries to enable and disable smartreflex. */
+static int omap_sr_autocomp_show(void *data, u64 *val)
+{
+ struct omap_sr *sr_info = data;
+
+ if (!sr_info) {
+ pr_warn("%s: omap_sr struct not found\n", __func__);
+ return -EINVAL;
+ }
+
+ *val = sr_info->autocomp_active;
+
+ return 0;
+}
+
+static int omap_sr_autocomp_store(void *data, u64 val)
+{
+ struct omap_sr *sr_info = data;
+
+ if (!sr_info) {
+ pr_warn("%s: omap_sr struct not found\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Sanity check */
+ if (val > 1) {
+ pr_warn("%s: Invalid argument %lld\n", __func__, val);
+ return -EINVAL;
+ }
+
+ /* control enable/disable only if there is a delta in value */
+ if (sr_info->autocomp_active != val) {
+ if (!val)
+ sr_stop_vddautocomp(sr_info);
+ else
+ sr_start_vddautocomp(sr_info);
+ }
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
+ omap_sr_autocomp_store, "%llu\n");
+
+static int __init omap_sr_probe(struct platform_device *pdev)
+{
+ struct omap_sr *sr_info;
+ struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct resource *mem, *irq;
+ struct dentry *nvalue_dir;
+ int i, ret = 0;
+
+ sr_info = devm_kzalloc(&pdev->dev, sizeof(struct omap_sr), GFP_KERNEL);
+ if (!sr_info)
+ return -ENOMEM;
+
+ sr_info->name = devm_kzalloc(&pdev->dev,
+ SMARTREFLEX_NAME_LEN, GFP_KERNEL);
+ if (!sr_info->name)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, sr_info);
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+ return -EINVAL;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sr_info->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(sr_info->base)) {
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
+ return PTR_ERR(sr_info->base);
+ }
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+
+ snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name);
+
+ sr_info->pdev = pdev;
+ sr_info->srid = pdev->id;
+ sr_info->voltdm = pdata->voltdm;
+ sr_info->nvalue_table = pdata->nvalue_table;
+ sr_info->nvalue_count = pdata->nvalue_count;
+ sr_info->senn_mod = pdata->senn_mod;
+ sr_info->senp_mod = pdata->senp_mod;
+ sr_info->err_weight = pdata->err_weight;
+ sr_info->err_maxlimit = pdata->err_maxlimit;
+ sr_info->accum_data = pdata->accum_data;
+ sr_info->senn_avgweight = pdata->senn_avgweight;
+ sr_info->senp_avgweight = pdata->senp_avgweight;
+ sr_info->autocomp_active = false;
+ sr_info->ip_type = pdata->ip_type;
+
+ if (irq)
+ sr_info->irq = irq->start;
+
+ sr_set_clk_length(sr_info);
+
+ list_add(&sr_info->node, &sr_list);
+
+ /*
+ * Call into late init to do initializations that require
+ * both sr driver and sr class driver to be initiallized.
+ */
+ if (sr_class) {
+ ret = sr_late_init(sr_info);
+ if (ret) {
+ pr_warn("%s: Error in SR late init\n", __func__);
+ goto err_list_del;
+ }
+ }
+
+ dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
+ if (!sr_dbg_dir) {
+ sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+ if (IS_ERR_OR_NULL(sr_dbg_dir)) {
+ ret = PTR_ERR(sr_dbg_dir);
+ pr_err("%s:sr debugfs dir creation failed(%d)\n",
+ __func__, ret);
+ goto err_list_del;
+ }
+ }
+
+ sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
+ if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
+ dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
+ __func__);
+ ret = PTR_ERR(sr_info->dbg_dir);
+ goto err_debugfs;
+ }
+
+ (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
+ sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
+ (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
+ &sr_info->err_weight);
+ (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
+ &sr_info->err_maxlimit);
+
+ nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
+ if (IS_ERR_OR_NULL(nvalue_dir)) {
+ dev_err(&pdev->dev, "%s: Unable to create debugfs directory for n-values\n",
+ __func__);
+ ret = PTR_ERR(nvalue_dir);
+ goto err_debugfs;
+ }
+
+ if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+ dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+ __func__, sr_info->name);
+
+ ret = -ENODATA;
+ goto err_debugfs;
+ }
+
+ for (i = 0; i < sr_info->nvalue_count; i++) {
+ char name[NVALUE_NAME_LEN + 1];
+
+ snprintf(name, sizeof(name), "volt_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+ &(sr_info->nvalue_table[i].nvalue));
+ snprintf(name, sizeof(name), "errminlimit_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+ &(sr_info->nvalue_table[i].errminlimit));
+
+ }
+
+ return ret;
+
+err_debugfs:
+ debugfs_remove_recursive(sr_info->dbg_dir);
+err_list_del:
+ list_del(&sr_info->node);
+ return ret;
+}
+
+static int omap_sr_remove(struct platform_device *pdev)
+{
+ struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct omap_sr *sr_info;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+ return -EINVAL;
+ }
+
+ sr_info = _sr_lookup(pdata->voltdm);
+ if (IS_ERR(sr_info)) {
+ dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+ __func__);
+ return PTR_ERR(sr_info);
+ }
+
+ if (sr_info->autocomp_active)
+ sr_stop_vddautocomp(sr_info);
+ debugfs_remove_recursive(sr_info->dbg_dir);
+
+ pm_runtime_disable(&pdev->dev);
+ list_del(&sr_info->node);
+ return 0;
+}
+
+static void omap_sr_shutdown(struct platform_device *pdev)
+{
+ struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct omap_sr *sr_info;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+ return;
+ }
+
+ sr_info = _sr_lookup(pdata->voltdm);
+ if (IS_ERR(sr_info)) {
+ dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+ __func__);
+ return;
+ }
+
+ if (sr_info->autocomp_active)
+ sr_stop_vddautocomp(sr_info);
+
+ return;
+}
+
+static struct platform_driver smartreflex_driver = {
+ .remove = omap_sr_remove,
+ .shutdown = omap_sr_shutdown,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init sr_init(void)
+{
+ int ret = 0;
+
+ /*
+ * sr_init is a late init. If by then a pmic specific API is not
+ * registered either there is no need for anything to be done on
+ * the PMIC side or somebody has forgotten to register a PMIC
+ * handler. Warn for the second condition.
+ */
+ if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
+ sr_pmic_data->sr_pmic_init();
+ else
+ pr_warn("%s: No PMIC hook to init smartreflex\n", __func__);
+
+ ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+ if (ret) {
+ pr_err("%s: platform driver register failed for SR\n",
+ __func__);
+ return ret;
+ }
+
+ return 0;
+}
+late_initcall(sr_init);
+
+static void __exit sr_exit(void)
+{
+ platform_driver_unregister(&smartreflex_driver);
+}
+module_exit(sr_exit);
+
+MODULE_DESCRIPTION("OMAP Smartreflex Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");