[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/power/reset/qnap-poweroff.c b/src/kernel/linux/v4.14/drivers/power/reset/qnap-poweroff.c
new file mode 100644
index 0000000..2789a61
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,140 @@
+/*
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x) (base + ((UART_##x) << 2))
+
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static void __iomem *base;
+static unsigned long tclk;
+static const struct power_off_cfg *cfg;
+
+static void qnap_power_off(void)
+{
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
+
+ pr_err("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ struct clk *clk;
+ char symname[KSYM_NAME_LEN];
+
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing resource");
+ return -EINVAL;
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "Unable to map resource");
+ return -EINVAL;
+ }
+
+ /* We need to know tclk in order to calculate the UART divisor */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Clk missing");
+ return PTR_ERR(clk);
+ }
+
+ tclk = clk_get_rate(clk);
+
+ /* Check that nothing else has already setup a handler */
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ dev_err(&pdev->dev,
+ "pm_power_off already claimed %p %s",
+ pm_power_off, symname);
+ return -EBUSY;
+ }
+ pm_power_off = qnap_power_off;
+
+ return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+ pm_power_off = NULL;
+ return 0;
+}
+
+static struct platform_driver qnap_power_off_driver = {
+ .probe = qnap_power_off_probe,
+ .remove = qnap_power_off_remove,
+ .driver = {
+ .name = "qnap_power_off",
+ .of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+ },
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPL v2");