[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/rapidio/devices/tsi721.c b/src/kernel/linux/v4.14/drivers/rapidio/devices/tsi721.c
new file mode 100644
index 0000000..9a68914
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rapidio/devices/tsi721.c
@@ -0,0 +1,3014 @@
+/*
+ * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright 2011 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Chul Kim <chul.kim@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+
+#include "tsi721.h"
+
+#ifdef DEBUG
+u32 tsi_dbg_level;
+module_param_named(dbg_level, tsi_dbg_level, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
+#endif
+
+static int pcie_mrrs = -1;
+module_param(pcie_mrrs, int, S_IRUGO);
+MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)");
+
+static u8 mbox_sel = 0x0f;
+module_param(mbox_sel, byte, S_IRUGO);
+MODULE_PARM_DESC(mbox_sel,
+ "RIO Messaging MBOX Selection Mask (default: 0x0f = all)");
+
+static DEFINE_SPINLOCK(tsi721_maint_lock);
+
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
+
+/**
+ * tsi721_lcread - read from local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a local SREP space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ *data = ioread32(priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_lcwrite - write into local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a local write into SREP configuration space. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ iowrite32(data, priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_maint_dma - Helper function to generate RapidIO maintenance
+ * transactions using designated Tsi721 DMA channel.
+ * @priv: pointer to tsi721 private data
+ * @sys_size: RapdiIO transport system size
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Location to be read from or write into
+ * @do_wr: Operation flag (1 == MAINT_WR)
+ *
+ * Generates a RapidIO maintenance transaction (Read or Write).
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
+ u16 destid, u8 hopcount, u32 offset, int len,
+ u32 *data, int do_wr)
+{
+ void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
+ struct tsi721_dma_desc *bd_ptr;
+ u32 rd_count, swr_ptr, ch_stat;
+ unsigned long flags;
+ int i, err = 0;
+ u32 op = do_wr ? MAINT_WR : MAINT_RD;
+
+ if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
+ return -EINVAL;
+
+ spin_lock_irqsave(&tsi721_maint_lock, flags);
+
+ bd_ptr = priv->mdma.bd_base;
+
+ rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
+
+ /* Initialize DMA descriptor */
+ bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
+ bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
+ bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
+ bd_ptr[0].raddr_hi = 0;
+ if (do_wr)
+ bd_ptr[0].data[0] = cpu_to_be32p(data);
+ else
+ bd_ptr[0].data[0] = 0xffffffff;
+
+ mb();
+
+ /* Start DMA operation */
+ iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT);
+ ioread32(regs + TSI721_DMAC_DWRCNT);
+ i = 0;
+
+ /* Wait until DMA transfer is finished */
+ while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
+ & TSI721_DMAC_STS_RUN) {
+ udelay(1);
+ if (++i >= 5000000) {
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "DMA[%d] read timeout ch_status=%x",
+ priv->mdma.ch_id, ch_stat);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+ }
+
+ if (ch_stat & TSI721_DMAC_STS_ABORT) {
+ /* If DMA operation aborted due to error,
+ * reinitialize DMA channel
+ */
+ tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x",
+ ch_stat);
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "OP=%d : destid=%x hc=%x off=%x",
+ do_wr ? MAINT_WR : MAINT_RD,
+ destid, hopcount, offset);
+ iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+ udelay(10);
+ iowrite32(0, regs + TSI721_DMAC_DWRCNT);
+ udelay(1);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+
+ if (!do_wr)
+ *data = be32_to_cpu(bd_ptr[0].data[0]);
+
+ /*
+ * Update descriptor status FIFO RD pointer.
+ * NOTE: Skipping check and clear FIFO entries because we are waiting
+ * for transfer to be completed.
+ */
+ swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
+ iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
+
+err_out:
+ spin_unlock_irqrestore(&tsi721_maint_lock, flags);
+
+ return err;
+}
+
+/**
+ * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
+ * using Tsi721 BDMA engine.
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a RapidIO maintenance read transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, data, 0);
+}
+
+/**
+ * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
+ * using Tsi721 BDMA engine
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates a RapidIO maintenance write transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 temp = data;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, &temp, 1);
+}
+
+/**
+ * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
+ * @priv: tsi721 device private structure
+ *
+ * Handles inbound port-write interrupts. Copies PW message from an internal
+ * buffer into PW message FIFO and schedules deferred routine to process
+ * queued messages.
+ */
+static int
+tsi721_pw_handler(struct tsi721_device *priv)
+{
+ u32 pw_stat;
+ u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
+
+
+ pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
+ pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
+ pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
+ pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
+ pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
+
+ /* Queue PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ spin_lock(&priv->pw_fifo_lock);
+ if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
+ kfifo_in(&priv->pw_fifo, pw_buf,
+ TSI721_RIO_PW_MSG_SIZE);
+ else
+ priv->pw_discard_count++;
+ spin_unlock(&priv->pw_fifo_lock);
+ }
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ schedule_work(&priv->pw_work);
+
+ return 0;
+}
+
+static void tsi721_pw_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ pw_work);
+ union rio_pw_msg pwmsg;
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg,
+ TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler(&priv->mport, &pwmsg);
+ }
+}
+
+/**
+ * tsi721_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+static int tsi721_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ if (enable)
+ rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
+ else
+ rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+ /* Update enable bits */
+ iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ return 0;
+}
+
+/**
+ * tsi721_dsend - Send a RapidIO doorbell
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell
+ *
+ * Sends a RapidIO doorbell message. Always returns %0.
+ */
+static int tsi721_dsend(struct rio_mport *mport, int index,
+ u16 destid, u16 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 offset;
+
+ offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
+ (destid << 2);
+
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "Send Doorbell 0x%04x to destID 0x%x", data, destid);
+ iowrite16be(data, priv->odb_base + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
+ * @priv: tsi721 device-specific data structure
+ *
+ * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
+ * buffer into DB message FIFO and schedules deferred routine to process
+ * queued DBs.
+ */
+static int
+tsi721_dbell_handler(struct tsi721_device *priv)
+{
+ u32 regval;
+
+ /* Disable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval &= ~TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ schedule_work(&priv->idb_work);
+
+ return 0;
+}
+
+static void tsi721_db_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ idb_work);
+ struct rio_mport *mport;
+ struct rio_dbell *dbell;
+ int found = 0;
+ u32 wr_ptr, rd_ptr;
+ u64 *idb_entry;
+ u32 regval;
+ union {
+ u64 msg;
+ u8 bytes[8];
+ } idb;
+
+ /*
+ * Process queued inbound doorbells
+ */
+ mport = &priv->mport;
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
+
+ while (wr_ptr != rd_ptr) {
+ idb_entry = (u64 *)(priv->idb_base +
+ (TSI721_IDB_ENTRY_SIZE * rd_ptr));
+ rd_ptr++;
+ rd_ptr %= IDB_QSIZE;
+ idb.msg = *idb_entry;
+ *idb_entry = 0;
+
+ /* Process one doorbell */
+ list_for_each_entry(dbell, &mport->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
+ (dbell->res->end >= DBELL_INF(idb.bytes))) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ } else {
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "spurious IDB sid %2.2x tid %2.2x info %4.4x",
+ DBELL_SID(idb.bytes), DBELL_TID(idb.bytes),
+ DBELL_INF(idb.bytes));
+ }
+
+ wr_ptr = ioread32(priv->regs +
+ TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ }
+
+ iowrite32(rd_ptr & (IDB_QSIZE - 1),
+ priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ /* Re-enable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval |= TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ if (wr_ptr != rd_ptr)
+ schedule_work(&priv->idb_work);
+}
+
+/**
+ * tsi721_irqhandler - Tsi721 interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
+ * interrupt events and calls an event-specific handler(s).
+ */
+static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 dev_int;
+ u32 dev_ch_int;
+ u32 intval;
+ u32 ch_inte;
+
+ /* For MSI mode disable all device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI)
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ dev_int = ioread32(priv->regs + TSI721_DEV_INT);
+ if (!dev_int)
+ return IRQ_NONE;
+
+ dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
+
+ if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
+ /* Service SR2PC Channel interrupts */
+ if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
+ /* Service Inbound Doorbell interrupt */
+ intval = ioread32(priv->regs +
+ TSI721_SR_CHINT(IDB_QUEUE));
+ if (intval & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(priv);
+ else
+ tsi_info(&priv->pdev->dev,
+ "Unsupported SR_CH_INT %x", intval);
+
+ /* Clear interrupts */
+ iowrite32(intval,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SMSG_CH) {
+ int ch;
+
+ /*
+ * Service channel interrupts from Messaging Engine
+ */
+
+ if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Inbound Message interrupt for each MBOX
+ */
+ for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
+ if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
+ continue;
+ tsi721_imsg_handler(priv, ch);
+ }
+ }
+
+ if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Outbound Message interrupts for each MBOX
+ */
+
+ for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
+ if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
+ continue;
+ tsi721_omsg_handler(priv, ch);
+ }
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SRIO) {
+ /* Service SRIO MAC interrupts */
+ intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(priv);
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ if (dev_int & TSI721_DEV_INT_BDMA_CH) {
+ int ch;
+
+ if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
+ tsi_debug(DMA, &priv->pdev->dev,
+ "IRQ from DMA channel 0x%08x", dev_ch_int);
+
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
+ if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
+ continue;
+ tsi721_bdma_handler(&priv->bdma[ch]);
+ }
+ }
+ }
+#endif
+
+ /* For MSI mode re-enable device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI) {
+ dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+ iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void tsi721_interrupts_init(struct tsi721_device *priv)
+{
+ u32 intr;
+
+ /* Enable IDB interrupts */
+ iowrite32(TSI721_SR_CHINT_ALL,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ iowrite32(TSI721_SR_CHINT_IDBQRCV,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ /* Enable SRIO MAC interrupts */
+ iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
+ priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+
+ /* Enable interrupts from channels in use */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
+ (TSI721_INT_BDMA_CHAN_M &
+ ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
+#else
+ intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
+#endif
+ iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ if (priv->flags & TSI721_USING_MSIX)
+ intr = TSI721_DEV_INT_SRIO;
+ else
+ intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+
+ iowrite32(intr, priv->regs + TSI721_DEV_INTE);
+ ioread32(priv->regs + TSI721_DEV_INTE);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles outbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
+ tsi721_omsg_handler(priv, mbox);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles inbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
+ tsi721_imsg_handler(priv, mbox + 4);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts from SRIO MAC.
+ */
+static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 srio_int;
+
+ /* Service SRIO MAC interrupts */
+ srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(priv);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts from SR2PC Channel.
+ * NOTE: At this moment services only one SR2PC channel associated with inbound
+ * doorbells.
+ */
+static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 sr_ch_int;
+
+ /* Service Inbound DB interrupt from SR2PC channel */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(priv);
+
+ /* Clear interrupts */
+ iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ /* Read back to ensure that interrupt was cleared */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_request_msix - register interrupt service for MSI-X mode.
+ * @priv: tsi721 device-specific data structure
+ *
+ * Registers MSI-X interrupt service routines for interrupts that are active
+ * immediately after mport initialization. Messaging interrupt service routines
+ * should be registered during corresponding open requests.
+ */
+static int tsi721_request_msix(struct tsi721_device *priv)
+{
+ int err = 0;
+
+ err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
+ tsi721_sr2pc_ch_msix, 0,
+ priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv);
+ if (err)
+ return err;
+
+ err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
+ tsi721_srio_msix, 0,
+ priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv);
+ if (err) {
+ free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures MSI-X support for Tsi721. Supports only an exact number
+ * of requested vectors.
+ */
+static int tsi721_enable_msix(struct tsi721_device *priv)
+{
+ struct msix_entry entries[TSI721_VECT_MAX];
+ int err;
+ int i;
+
+ entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
+ entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
+
+ /*
+ * Initialize MSI-X entries for Messaging Engine:
+ * this driver supports four RIO mailboxes (inbound and outbound)
+ * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
+ * offset +4 is added to IB MBOX number.
+ */
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ entries[TSI721_VECT_IMB0_RCV + i].entry =
+ TSI721_MSIX_IMSG_DQ_RCV(i + 4);
+ entries[TSI721_VECT_IMB0_INT + i].entry =
+ TSI721_MSIX_IMSG_INT(i + 4);
+ entries[TSI721_VECT_OMB0_DONE + i].entry =
+ TSI721_MSIX_OMSG_DONE(i);
+ entries[TSI721_VECT_OMB0_INT + i].entry =
+ TSI721_MSIX_OMSG_INT(i);
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ /*
+ * Initialize MSI-X entries for Block DMA Engine:
+ * this driver supports XXX DMA channels
+ * (one is reserved for SRIO maintenance transactions)
+ */
+ for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+ entries[TSI721_VECT_DMA0_DONE + i].entry =
+ TSI721_MSIX_DMACH_DONE(i);
+ entries[TSI721_VECT_DMA0_INT + i].entry =
+ TSI721_MSIX_DMACH_INT(i);
+ }
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+ err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
+ if (err) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to enable MSI-X (err=%d)", err);
+ return err;
+ }
+
+ /*
+ * Copy MSI-X vector information into tsi721 private structure
+ */
+ priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
+ snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
+ priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
+ snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
+
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
+ entries[TSI721_VECT_IMB0_RCV + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_IMB0_INT + i].vector =
+ entries[TSI721_VECT_IMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
+ entries[TSI721_VECT_OMB0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_INT + i].vector =
+ entries[TSI721_VECT_OMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+ priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
+ entries[TSI721_VECT_DMA0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_DMA0_INT + i].vector =
+ entries[TSI721_VECT_DMA0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+ return 0;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int tsi721_request_irq(struct tsi721_device *priv)
+{
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ err = tsi721_request_msix(priv);
+ else
+#endif
+ err = request_irq(priv->pdev->irq, tsi721_irqhandler,
+ (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
+ DRV_NAME, (void *)priv);
+
+ if (err)
+ tsi_err(&priv->pdev->dev,
+ "Unable to allocate interrupt, err=%d", err);
+
+ return err;
+}
+
+static void tsi721_free_irq(struct tsi721_device *priv)
+{
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv);
+ } else
+#endif
+ free_irq(priv->pdev->irq, (void *)priv);
+}
+
+static int
+tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar,
+ u32 size, int *win_id)
+{
+ u64 win_base;
+ u64 bar_base;
+ u64 bar_end;
+ u32 align;
+ struct tsi721_ob_win *win;
+ struct tsi721_ob_win *new_win = NULL;
+ int new_win_idx = -1;
+ int i = 0;
+
+ bar_base = pbar->base;
+ bar_end = bar_base + pbar->size;
+ win_base = bar_base;
+ align = size/TSI721_PC2SR_ZONES;
+
+ while (i < TSI721_IBWIN_NUM) {
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ if (!priv->ob_win[i].active) {
+ if (new_win == NULL) {
+ new_win = &priv->ob_win[i];
+ new_win_idx = i;
+ }
+ continue;
+ }
+
+ /*
+ * If this window belongs to the current BAR check it
+ * for overlap
+ */
+ win = &priv->ob_win[i];
+
+ if (win->base >= bar_base && win->base < bar_end) {
+ if (win_base < (win->base + win->size) &&
+ (win_base + size) > win->base) {
+ /* Overlap detected */
+ win_base = win->base + win->size;
+ win_base = ALIGN(win_base, align);
+ break;
+ }
+ }
+ }
+ }
+
+ if (win_base + size > bar_end)
+ return -ENOMEM;
+
+ if (!new_win) {
+ tsi_err(&priv->pdev->dev, "OBW count tracking failed");
+ return -EIO;
+ }
+
+ new_win->active = true;
+ new_win->base = win_base;
+ new_win->size = size;
+ new_win->pbar = pbar;
+ priv->obwin_cnt--;
+ pbar->free -= size;
+ *win_id = new_win_idx;
+ return 0;
+}
+
+static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart,
+ u32 size, u32 flags, dma_addr_t *laddr)
+{
+ struct tsi721_device *priv = mport->priv;
+ int i;
+ struct tsi721_obw_bar *pbar;
+ struct tsi721_ob_win *ob_win;
+ int obw = -1;
+ u32 rval;
+ u64 rio_addr;
+ u32 zsize;
+ int ret = -ENOMEM;
+
+ tsi_debug(OBW, &priv->pdev->dev,
+ "did=%d ra=0x%llx sz=0x%x", destid, rstart, size);
+
+ if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1)))
+ return -EINVAL;
+
+ if (priv->obwin_cnt == 0)
+ return -EBUSY;
+
+ for (i = 0; i < 2; i++) {
+ if (priv->p2r_bar[i].free >= size) {
+ pbar = &priv->p2r_bar[i];
+ ret = tsi721_obw_alloc(priv, pbar, size, &obw);
+ if (!ret)
+ break;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ WARN_ON(obw == -1);
+ ob_win = &priv->ob_win[obw];
+ ob_win->destid = destid;
+ ob_win->rstart = rstart;
+ tsi_debug(OBW, &priv->pdev->dev,
+ "allocated OBW%d @%llx", obw, ob_win->base);
+
+ /*
+ * Configure Outbound Window
+ */
+
+ zsize = size/TSI721_PC2SR_ZONES;
+ rio_addr = rstart;
+
+ /*
+ * Program Address Translation Zones:
+ * This implementation uses all 8 zones associated wit window.
+ */
+ for (i = 0; i < TSI721_PC2SR_ZONES; i++) {
+
+ while (ioread32(priv->regs + TSI721_ZONE_SEL) &
+ TSI721_ZONE_SEL_GO) {
+ udelay(1);
+ }
+
+ rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) |
+ TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR;
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA0);
+ rval = (u32)(rio_addr >> 32);
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA1);
+ rval = destid;
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA2);
+
+ rval = TSI721_ZONE_SEL_GO | (obw << 3) | i;
+ iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
+
+ rio_addr += zsize;
+ }
+
+ iowrite32(TSI721_OBWIN_SIZE(size) << 8,
+ priv->regs + TSI721_OBWINSZ(obw));
+ iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw));
+ iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN,
+ priv->regs + TSI721_OBWINLB(obw));
+
+ *laddr = ob_win->base;
+ return 0;
+}
+
+static void tsi721_unmap_outb_win(struct rio_mport *mport,
+ u16 destid, u64 rstart)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_ob_win *ob_win;
+ int i;
+
+ tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart);
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++) {
+ ob_win = &priv->ob_win[i];
+
+ if (ob_win->active &&
+ ob_win->destid == destid && ob_win->rstart == rstart) {
+ tsi_debug(OBW, &priv->pdev->dev,
+ "free OBW%d @%llx", i, ob_win->base);
+ ob_win->active = false;
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+ ob_win->pbar->free += ob_win->size;
+ priv->obwin_cnt++;
+ break;
+ }
+ }
+}
+
+/**
+ * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables SREP translation regions.
+ */
+static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
+{
+ int i, z;
+ u32 rval;
+
+ /* Disable all PC2SR translation windows */
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+
+ /* Initialize zone lookup tables to avoid ECC errors on reads */
+ iowrite32(0, priv->regs + TSI721_LUT_DATA0);
+ iowrite32(0, priv->regs + TSI721_LUT_DATA1);
+ iowrite32(0, priv->regs + TSI721_LUT_DATA2);
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++) {
+ for (z = 0; z < TSI721_PC2SR_ZONES; z++) {
+ while (ioread32(priv->regs + TSI721_ZONE_SEL) &
+ TSI721_ZONE_SEL_GO) {
+ udelay(1);
+ }
+ rval = TSI721_ZONE_SEL_GO | (i << 3) | z;
+ iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
+ }
+ }
+
+ if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) {
+ priv->obwin_cnt = 0;
+ return;
+ }
+
+ priv->p2r_bar[0].free = priv->p2r_bar[0].size;
+ priv->p2r_bar[1].free = priv->p2r_bar[1].size;
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ priv->ob_win[i].active = false;
+
+ priv->obwin_cnt = TSI721_OBWIN_NUM;
+}
+
+/**
+ * tsi721_rio_map_inb_mem -- Mapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+ u64 rstart, u64 size, u32 flags)
+{
+ struct tsi721_device *priv = mport->priv;
+ int i, avail = -1;
+ u32 regval;
+ struct tsi721_ib_win *ib_win;
+ bool direct = (lstart == rstart);
+ u64 ibw_size;
+ dma_addr_t loc_start;
+ u64 ibw_start;
+ struct tsi721_ib_win_mapping *map = NULL;
+ int ret = -EBUSY;
+
+ /* Max IBW size supported by HW is 16GB */
+ if (size > 0x400000000UL)
+ return -EINVAL;
+
+ if (direct) {
+ /* Calculate minimal acceptable window size and base address */
+
+ ibw_size = roundup_pow_of_two(size);
+ ibw_start = lstart & ~(ibw_size - 1);
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx",
+ rstart, &lstart, size, ibw_start);
+
+ while ((lstart + size) > (ibw_start + ibw_size)) {
+ ibw_size *= 2;
+ ibw_start = lstart & ~(ibw_size - 1);
+ /* Check for crossing IBW max size 16GB */
+ if (ibw_size > 0x400000000UL)
+ return -EBUSY;
+ }
+
+ loc_start = ibw_start;
+
+ map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC);
+ if (map == NULL)
+ return -ENOMEM;
+
+ } else {
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
+ rstart, &lstart, size);
+
+ if (!is_power_of_2(size) || size < 0x1000 ||
+ ((u64)lstart & (size - 1)) || (rstart & (size - 1)))
+ return -EINVAL;
+ if (priv->ibwin_cnt == 0)
+ return -EBUSY;
+ ibw_start = rstart;
+ ibw_size = size;
+ loc_start = lstart;
+ }
+
+ /*
+ * Scan for overlapping with active regions and mark the first available
+ * IB window at the same time.
+ */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+
+ if (!ib_win->active) {
+ if (avail == -1) {
+ avail = i;
+ ret = 0;
+ }
+ } else if (ibw_start < (ib_win->rstart + ib_win->size) &&
+ (ibw_start + ibw_size) > ib_win->rstart) {
+ /* Return error if address translation involved */
+ if (!direct || ib_win->xlat) {
+ ret = -EFAULT;
+ break;
+ }
+
+ /*
+ * Direct mappings usually are larger than originally
+ * requested fragments - check if this new request fits
+ * into it.
+ */
+ if (rstart >= ib_win->rstart &&
+ (rstart + size) <= (ib_win->rstart +
+ ib_win->size)) {
+ /* We are in - no further mapping required */
+ map->lstart = lstart;
+ list_add_tail(&map->node, &ib_win->mappings);
+ return 0;
+ }
+
+ ret = -EFAULT;
+ break;
+ }
+ }
+
+ if (ret)
+ goto out;
+ i = avail;
+
+ /* Sanity check: available IB window must be disabled at this point */
+ regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
+ if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ib_win = &priv->ib_win[i];
+ ib_win->active = true;
+ ib_win->rstart = ibw_start;
+ ib_win->lstart = loc_start;
+ ib_win->size = ibw_size;
+ ib_win->xlat = (lstart != rstart);
+ INIT_LIST_HEAD(&ib_win->mappings);
+
+ /*
+ * When using direct IBW mapping and have larger than requested IBW size
+ * we can have multiple local memory blocks mapped through the same IBW
+ * To handle this situation we maintain list of "clients" for such IBWs.
+ */
+ if (direct) {
+ map->lstart = lstart;
+ list_add_tail(&map->node, &ib_win->mappings);
+ }
+
+ iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8,
+ priv->regs + TSI721_IBWIN_SZ(i));
+
+ iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i));
+ iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD),
+ priv->regs + TSI721_IBWIN_TLA(i));
+
+ iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i));
+ iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
+ priv->regs + TSI721_IBWIN_LB(i));
+
+ priv->ibwin_cnt--;
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
+ i, ibw_start, &loc_start, ibw_size);
+
+ return 0;
+out:
+ kfree(map);
+ return ret;
+}
+
+/**
+ * tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
+ dma_addr_t lstart)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_ib_win *ib_win;
+ int i;
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Unmap IBW mapped to PCIe_%pad", &lstart);
+
+ /* Search for matching active inbound translation window */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+
+ /* Address translating IBWs must to be an exact march */
+ if (!ib_win->active ||
+ (ib_win->xlat && lstart != ib_win->lstart))
+ continue;
+
+ if (lstart >= ib_win->lstart &&
+ lstart < (ib_win->lstart + ib_win->size)) {
+
+ if (!ib_win->xlat) {
+ struct tsi721_ib_win_mapping *map;
+ int found = 0;
+
+ list_for_each_entry(map,
+ &ib_win->mappings, node) {
+ if (map->lstart == lstart) {
+ list_del(&map->node);
+ kfree(map);
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ continue;
+
+ if (!list_empty(&ib_win->mappings))
+ break;
+ }
+
+ tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i);
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ ib_win->active = false;
+ priv->ibwin_cnt++;
+ break;
+ }
+ }
+
+ if (i == TSI721_IBWIN_NUM)
+ tsi_debug(IBW, &priv->pdev->dev,
+ "IB window mapped to %pad not found", &lstart);
+}
+
+/**
+ * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables inbound windows.
+ */
+static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ priv->ibwin_cnt = TSI721_IBWIN_NUM;
+}
+
+/*
+ * tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 device private data
+ */
+static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv)
+{
+ struct tsi721_ib_win *ib_win;
+ int i;
+
+ /* Disable all active SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+ if (ib_win->active) {
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ ib_win->active = false;
+ }
+ }
+}
+
+/**
+ * tsi721_port_write_init - Inbound port write interface init
+ * @priv: pointer to tsi721 private data
+ *
+ * Initializes inbound port write handler.
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_port_write_init(struct tsi721_device *priv)
+{
+ priv->pw_discard_count = 0;
+ INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo,
+ TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ tsi_err(&priv->pdev->dev, "PW FIFO allocation failed");
+ return -ENOMEM;
+ }
+
+ /* Use reliable port-write capture mode */
+ iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
+ return 0;
+}
+
+static void tsi721_port_write_free(struct tsi721_device *priv)
+{
+ kfifo_free(&priv->pw_fifo);
+}
+
+static int tsi721_doorbell_init(struct tsi721_device *priv)
+{
+ /* Outbound Doorbells do not require any setup.
+ * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
+ * That BAR1 was mapped during the probe routine.
+ */
+
+ /* Initialize Inbound Doorbell processing DPC and queue */
+ priv->db_discard_count = 0;
+ INIT_WORK(&priv->idb_work, tsi721_db_dpc);
+
+ /* Allocate buffer for inbound doorbells queue */
+ priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev,
+ IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ &priv->idb_dma, GFP_KERNEL);
+ if (!priv->idb_base)
+ return -ENOMEM;
+
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "Allocated IDB buffer @ %p (phys = %pad)",
+ priv->idb_base, &priv->idb_dma);
+
+ iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
+ priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma >> 32),
+ priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
+ priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
+ /* Enable accepting all inbound doorbells */
+ iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
+
+ iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
+
+ iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ return 0;
+}
+
+static void tsi721_doorbell_free(struct tsi721_device *priv)
+{
+ if (priv->idb_base == NULL)
+ return;
+
+ /* Free buffer allocated for inbound doorbell queue */
+ dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ priv->idb_base, priv->idb_dma);
+ priv->idb_base = NULL;
+}
+
+/**
+ * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
+ * @priv: pointer to tsi721 private data
+ *
+ * Initialize BDMA channel allocated for RapidIO maintenance read/write
+ * request generation
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_bdma_maint_init(struct tsi721_device *priv)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u64 *sts_ptr;
+ dma_addr_t bd_phys, sts_phys;
+ int sts_size;
+ int bd_num = 2;
+ void __iomem *regs;
+
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT);
+
+ /*
+ * Initialize DMA channel for maintenance requests
+ */
+
+ priv->mdma.ch_id = TSI721_DMACH_MAINT;
+ regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
+
+ /* Allocate space for DMA descriptors */
+ bd_ptr = dma_zalloc_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ &bd_phys, GFP_KERNEL);
+ if (!bd_ptr)
+ return -ENOMEM;
+
+ priv->mdma.bd_num = bd_num;
+ priv->mdma.bd_phys = bd_phys;
+ priv->mdma.bd_base = bd_ptr;
+
+ tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)",
+ bd_ptr, &bd_phys);
+
+ /* Allocate space for descriptor status FIFO */
+ sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
+ bd_num : TSI721_DMA_MINSTSSZ;
+ sts_size = roundup_pow_of_two(sts_size);
+ sts_ptr = dma_zalloc_coherent(&priv->pdev->dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ &sts_phys, GFP_KERNEL);
+ if (!sts_ptr) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ priv->mdma.bd_base = NULL;
+ return -ENOMEM;
+ }
+
+ priv->mdma.sts_phys = sts_phys;
+ priv->mdma.sts_base = sts_ptr;
+ priv->mdma.sts_size = sts_size;
+
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "desc status FIFO @ %p (phys = %pad) size=0x%x",
+ sts_ptr, &sts_phys, sts_size);
+
+ /* Initialize DMA descriptors ring */
+ bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
+ bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
+ TSI721_DMAC_DPTRL_MASK);
+ bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH);
+ iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+ regs + TSI721_DMAC_DPTRL);
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
+ iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+ regs + TSI721_DMAC_DSBL);
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+ regs + TSI721_DMAC_DSSZ);
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+
+ ioread32(regs + TSI721_DMAC_INT);
+
+ /* Toggle DMA channel initialization */
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+ ioread32(regs + TSI721_DMAC_CTL);
+ udelay(10);
+
+ return 0;
+}
+
+static int tsi721_bdma_maint_free(struct tsi721_device *priv)
+{
+ u32 ch_stat;
+ struct tsi721_bdma_maint *mdma = &priv->mdma;
+ void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
+
+ if (mdma->bd_base == NULL)
+ return 0;
+
+ /* Check if DMA channel still running */
+ ch_stat = ioread32(regs + TSI721_DMAC_STS);
+ if (ch_stat & TSI721_DMAC_STS_RUN)
+ return -EFAULT;
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ mdma->bd_num * sizeof(struct tsi721_dma_desc),
+ mdma->bd_base, mdma->bd_phys);
+ mdma->bd_base = NULL;
+
+ /* Free space allocated for status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ mdma->sts_size * sizeof(struct tsi721_dma_sts),
+ mdma->sts_base, mdma->sts_phys);
+ mdma->sts_base = NULL;
+ return 0;
+}
+
+/* Enable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Enable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Disable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Enable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Enable Outbound Messaging channel interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Disable Outbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/**
+ * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ */
+static int
+tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *desc;
+ u32 tx_slot;
+ unsigned long flags;
+
+ if (!priv->omsg_init[mbox] ||
+ len > TSI721_MSG_MAX_SIZE || len < 8)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags);
+
+ tx_slot = priv->omsg_ring[mbox].tx_slot;
+
+ /* Copy copy message into transfer buffer */
+ memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
+
+ if (len & 0x7)
+ len += 8;
+
+ /* Build descriptor associated with buffer */
+ desc = priv->omsg_ring[mbox].omd_base;
+ desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
+#ifdef TSI721_OMSG_DESC_INT
+ /* Request IOF_DONE interrupt generation for each N-th frame in queue */
+ if (tx_slot % 4 == 0)
+ desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
+#endif
+ desc[tx_slot].msg_info =
+ cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
+ (0xe << 12) | (len & 0xff8));
+ desc[tx_slot].bufptr_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
+ 0xffffffff);
+ desc[tx_slot].bufptr_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
+
+ priv->omsg_ring[mbox].wr_count++;
+
+ /* Go to next descriptor */
+ if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
+ priv->omsg_ring[mbox].tx_slot = 0;
+ /* Move through the ring link descriptor at the end */
+ priv->omsg_ring[mbox].wr_count++;
+ }
+
+ mb();
+
+ /* Set new write count value */
+ iowrite32(priv->omsg_ring[mbox].wr_count,
+ priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+
+ spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags);
+
+ return 0;
+}
+
+/**
+ * tsi721_omsg_handler - Outbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: number of OB MSG channel to service
+ *
+ * Services channel interrupts from outbound messaging engine.
+ */
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 omsg_int;
+ struct rio_mport *mport = &priv->mport;
+ void *dev_id = NULL;
+ u32 tx_slot = 0xffffffff;
+ int do_callback = 0;
+
+ spin_lock(&priv->omsg_ring[ch].lock);
+
+ omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
+ tsi_info(&priv->pdev->dev,
+ "OB MBOX%d: Status FIFO is full", ch);
+
+ if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
+ u32 srd_ptr;
+ u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
+ int i, j;
+
+ /*
+ * Find last successfully processed descriptor
+ */
+
+ /* Check and clear descriptor status FIFO entries */
+ srd_ptr = priv->omsg_ring[ch].sts_rdptr;
+ sts_ptr = priv->omsg_ring[ch].sts_base;
+ j = srd_ptr * 8;
+ while (sts_ptr[j]) {
+ for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
+ prev_ptr = last_ptr;
+ last_ptr = le64_to_cpu(sts_ptr[j]);
+ sts_ptr[j] = 0;
+ }
+
+ ++srd_ptr;
+ srd_ptr %= priv->omsg_ring[ch].sts_size;
+ j = srd_ptr * 8;
+ }
+
+ if (last_ptr == 0)
+ goto no_sts_update;
+
+ priv->omsg_ring[ch].sts_rdptr = srd_ptr;
+ iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
+
+ if (!mport->outb_msg[ch].mcback)
+ goto no_sts_update;
+
+ /* Inform upper layer about transfer completion */
+
+ tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+
+ /*
+ * Check if this is a Link Descriptor (LD).
+ * If yes, ignore LD and use descriptor processed
+ * before LD.
+ */
+ if (tx_slot == priv->omsg_ring[ch].size) {
+ if (prev_ptr)
+ tx_slot = (prev_ptr -
+ (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+ else
+ goto no_sts_update;
+ }
+
+ if (tx_slot >= priv->omsg_ring[ch].size)
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "OB_MSG tx_slot=%x > size=%x",
+ tx_slot, priv->omsg_ring[ch].size);
+ WARN_ON(tx_slot >= priv->omsg_ring[ch].size);
+
+ /* Move slot index to the next message to be sent */
+ ++tx_slot;
+ if (tx_slot == priv->omsg_ring[ch].size)
+ tx_slot = 0;
+
+ dev_id = priv->omsg_ring[ch].dev_id;
+ do_callback = 1;
+ }
+
+no_sts_update:
+
+ if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
+ /*
+ * Outbound message operation aborted due to error,
+ * reinitialize OB MSG channel
+ */
+
+ tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x",
+ ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
+
+ iowrite32(TSI721_OBDMAC_INT_ERROR,
+ priv->regs + TSI721_OBDMAC_INT(ch));
+ iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
+
+ /* Inform upper level to clear all pending tx slots */
+ dev_id = priv->omsg_ring[ch].dev_id;
+ tx_slot = priv->omsg_ring[ch].tx_slot;
+ do_callback = 1;
+
+ /* Synch tx_slot tracking */
+ iowrite32(priv->omsg_ring[ch].tx_slot,
+ priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
+ priv->omsg_ring[ch].sts_rdptr = 0;
+ }
+
+ /* Clear channel interrupts */
+ iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->omsg_ring[ch].lock);
+
+ if (mport->outb_msg[ch].mcback && do_callback)
+ mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot);
+}
+
+/**
+ * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
+ * @mport: Master port implementing Outbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ */
+static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *bd_ptr;
+ int i, rc = 0;
+
+ if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
+ (entries > (TSI721_OMSGD_RING_SIZE)) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((mbox_sel & (1 << mbox)) == 0) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ priv->omsg_ring[mbox].dev_id = dev_id;
+ priv->omsg_ring[mbox].size = entries;
+ priv->omsg_ring[mbox].sts_rdptr = 0;
+ spin_lock_init(&priv->omsg_ring[mbox].lock);
+
+ /* Outbound Msg Buffer allocation based on
+ the number of maximum descriptor entries */
+ for (i = 0; i < entries; i++) {
+ priv->omsg_ring[mbox].omq_base[i] =
+ dma_alloc_coherent(
+ &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
+ &priv->omsg_ring[mbox].omq_phys[i],
+ GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d data buffer", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+ }
+
+ /* Outbound message descriptor allocation */
+ priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
+ &priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omd_base == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d descriptor memory", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ priv->omsg_ring[mbox].tx_slot = 0;
+
+ /* Outbound message descriptor status FIFO allocation */
+ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
+ priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size *
+ sizeof(struct tsi721_dma_sts),
+ &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].sts_base == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d status FIFO", mbox);
+ rc = -ENOMEM;
+ goto out_desc;
+ }
+
+ /*
+ * Configure Outbound Messaging Engine
+ */
+
+ /* Setup Outbound Message descriptor pointer */
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DPTRH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK),
+ priv->regs + TSI721_OBDMAC_DPTRL(mbox));
+
+ /* Setup Outbound Message descriptor status FIFO */
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DSBH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
+ TSI721_OBDMAC_DSBL_MASK),
+ priv->regs + TSI721_OBDMAC_DSBL(mbox));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
+ priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ int idx = TSI721_VECT_OMB0_DONE + mbox;
+
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for OBOX%d-DONE",
+ mbox);
+ goto out_stat;
+ }
+
+ idx = TSI721_VECT_OMB0_INT + mbox;
+ rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for MBOX%d-INT", mbox);
+ idx = TSI721_VECT_OMB0_DONE + mbox;
+ free_irq(priv->msix[idx].vector, (void *)priv);
+ goto out_stat;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+ /* Initialize Outbound Message descriptors ring */
+ bd_ptr = priv->omsg_ring[mbox].omd_base;
+ bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
+ bd_ptr[entries].msg_info = 0;
+ bd_ptr[entries].next_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK);
+ bd_ptr[entries].next_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
+ priv->omsg_ring[mbox].wr_count = 0;
+ mb();
+
+ /* Initialize Outbound Message engine */
+ iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ udelay(10);
+
+ priv->omsg_init[mbox] = 1;
+
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_stat:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+out_buf:
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 i;
+
+ if (!priv->omsg_init[mbox])
+ return;
+ priv->omsg_init[mbox] = 0;
+
+ /* Disable Interrupts */
+
+ tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ (void *)priv);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Free OMSG Descriptor Status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+
+ /* Free OMSG descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ (priv->omsg_ring[mbox].size + 1) *
+ sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+ /* Free message buffers */
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+}
+
+/**
+ * tsi721_imsg_handler - Inbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: inbound message channel number to service
+ *
+ * Services channel interrupts from inbound messaging engine.
+ */
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 mbox = ch - 4;
+ u32 imsg_int;
+ struct rio_mport *mport = &priv->mport;
+
+ spin_lock(&priv->imsg_ring[mbox].lock);
+
+ imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
+
+ if (imsg_int & TSI721_IBDMAC_INT_SRTO)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox);
+
+ /* Clear IB channel interrupts */
+ iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* If an IB Msg is received notify the upper layer */
+ if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
+ mport->inb_msg[mbox].mcback)
+ mport->inb_msg[mbox].mcback(mport,
+ priv->imsg_ring[mbox].dev_id, mbox, -1);
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->imsg_ring[mbox].lock);
+}
+
+/**
+ * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ */
+static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ int ch = mbox + 4;
+ int i;
+ u64 *free_ptr;
+ int rc = 0;
+
+ if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
+ (entries > TSI721_IMSGD_RING_SIZE) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((mbox_sel & (1 << mbox)) == 0) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ /* Initialize IB Messaging Ring */
+ priv->imsg_ring[mbox].dev_id = dev_id;
+ priv->imsg_ring[mbox].size = entries;
+ priv->imsg_ring[mbox].rx_slot = 0;
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+ for (i = 0; i < priv->imsg_ring[mbox].size; i++)
+ priv->imsg_ring[mbox].imq_base[i] = NULL;
+ spin_lock_init(&priv->imsg_ring[mbox].lock);
+
+ /* Allocate buffers for incoming messages */
+ priv->imsg_ring[mbox].buf_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * TSI721_MSG_BUFFER_SIZE,
+ &priv->imsg_ring[mbox].buf_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].buf_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate buffers for IB MBOX%d", mbox);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Allocate memory for circular free list */
+ priv->imsg_ring[mbox].imfq_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * 8,
+ &priv->imsg_ring[mbox].imfq_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imfq_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate free queue for IB MBOX%d", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ /* Allocate memory for Inbound message descriptors */
+ priv->imsg_ring[mbox].imd_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * sizeof(struct tsi721_imsg_desc),
+ &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imd_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate descriptor memory for IB MBOX%d",
+ mbox);
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+
+ /* Fill free buffer pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ for (i = 0; i < entries; i++)
+ free_ptr[i] = cpu_to_le64(
+ (u64)(priv->imsg_ring[mbox].buf_phys) +
+ i * 0x1000);
+
+ mb();
+
+ /*
+ * For mapping of inbound SRIO Messages into appropriate queues we need
+ * to set Inbound Device ID register in the messaging engine. We do it
+ * once when first inbound mailbox is requested.
+ */
+ if (!(priv->flags & TSI721_IMSGID_SET)) {
+ iowrite32((u32)priv->mport.host_deviceid,
+ priv->regs + TSI721_IB_DEVID);
+ priv->flags |= TSI721_IMSGID_SET;
+ }
+
+ /*
+ * Configure Inbound Messaging channel (ch = mbox + 4)
+ */
+
+ /* Setup Inbound Message free queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
+ priv->regs + TSI721_IBDMAC_FQBH(ch));
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
+ TSI721_IBDMAC_FQBL_MASK),
+ priv->regs+TSI721_IBDMAC_FQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_FQSZ(ch));
+
+ /* Setup Inbound Message descriptor queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
+ priv->regs + TSI721_IBDMAC_DQBH(ch));
+ iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
+ (u32)TSI721_IBDMAC_DQBL_MASK),
+ priv->regs+TSI721_IBDMAC_DQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_DQSZ(ch));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ int idx = TSI721_VECT_IMB0_RCV + mbox;
+
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(IMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for IBOX%d-DONE",
+ mbox);
+ goto out_desc;
+ }
+
+ idx = TSI721_VECT_IMB0_INT + mbox;
+ rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(IMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for IBOX%d-INT", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)priv);
+ goto out_desc;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
+
+ /* Initialize Inbound Message Engine */
+ iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
+ udelay(10);
+ priv->imsg_ring[mbox].fq_wrptr = entries - 1;
+ iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
+
+ priv->imsg_init[mbox] = 1;
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_dma:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+out_buf:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int ch = mbox + 4;
+
+ if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
+ return;
+ priv->imsg_init[mbox] = 0;
+
+ /* Disable Inbound Messaging Engine */
+
+ /* Disable Interrupts */
+ tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ (void *)priv);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Clear Inbound Buffer Queue */
+ for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ /* Free memory allocated for message buffers */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+ /* Free memory allocated for free pointr list */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+ /* Free memory allocated for RX descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+}
+
+/**
+ * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ */
+static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int rc = 0;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
+ tsi_err(&priv->pdev->dev,
+ "Error adding inbound buffer %d, buffer exists",
+ rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
+
+ if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_imsg_desc *desc;
+ u32 rx_slot;
+ void *rx_virt = NULL;
+ u64 rx_phys;
+ void *buf = NULL;
+ u64 *free_ptr;
+ int ch = mbox + 4;
+ int msg_size;
+
+ if (!priv->imsg_init[mbox])
+ return NULL;
+
+ desc = priv->imsg_ring[mbox].imd_base;
+ desc += priv->imsg_ring[mbox].desc_rdptr;
+
+ if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
+ goto out;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
+ if (++rx_slot == priv->imsg_ring[mbox].size)
+ rx_slot = 0;
+ }
+
+ rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
+ le32_to_cpu(desc->bufptr_lo);
+
+ rx_virt = priv->imsg_ring[mbox].buf_base +
+ (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
+
+ buf = priv->imsg_ring[mbox].imq_base[rx_slot];
+ msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
+ if (msg_size == 0)
+ msg_size = RIO_MAX_MSG_SIZE;
+
+ memcpy(buf, rx_virt, msg_size);
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
+ if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].desc_rdptr,
+ priv->regs + TSI721_IBDMAC_DQRP(ch));
+
+ /* Return free buffer into the pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
+
+ if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].fq_wrptr,
+ priv->regs + TSI721_IBDMAC_FQWP(ch));
+out:
+ return buf;
+}
+
+/**
+ * tsi721_messages_init - Initialization of Messaging Engine
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 messaging engine.
+ */
+static int tsi721_messages_init(struct tsi721_device *priv)
+{
+ int ch;
+
+ iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
+ iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
+ iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
+
+ /* Set SRIO Message Request/Response Timeout */
+ iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
+
+ /* Initialize Inbound Messaging Engine Registers */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
+ /* Clear interrupt bits */
+ iowrite32(TSI721_IBDMAC_INT_MASK,
+ priv->regs + TSI721_IBDMAC_INT(ch));
+ /* Clear Status */
+ iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
+
+ iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
+ priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
+ iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
+ priv->regs + TSI721_SMSG_ECC_NCOR(ch));
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static int tsi721_query_mport(struct rio_mport *mport,
+ struct rio_mport_attr *attr)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
+ if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
+ attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
+ attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
+ } else
+ attr->link_speed = RIO_LINK_DOWN;
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG;
+ attr->dma_max_sge = 0;
+ attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT;
+ attr->dma_align = 0;
+#else
+ attr->flags = 0;
+#endif
+ return 0;
+}
+
+/**
+ * tsi721_disable_ints - disables all device interrupts
+ * @priv: pointer to tsi721 private data
+ */
+static void tsi721_disable_ints(struct tsi721_device *priv)
+{
+ int ch;
+
+ /* Disable all device level interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ /* Disable all Device Channel interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Disable all Inbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ /* Disable all Outbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ /* Disable all general messaging interrupts */
+ iowrite32(0, priv->regs + TSI721_SMSG_INTE);
+
+ /* Disable all BDMA Channel interrupts */
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
+ iowrite32(0,
+ priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
+
+ /* Disable all general BDMA interrupts */
+ iowrite32(0, priv->regs + TSI721_BDMA_INTE);
+
+ /* Disable all SRIO Channel interrupts */
+ for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
+
+ /* Disable all general SR2PC interrupts */
+ iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
+
+ /* Disable all PC2SR interrupts */
+ iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
+
+ /* Disable all I2C interrupts */
+ iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
+
+ /* Disable SRIO MAC interrupts */
+ iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+ iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+}
+
+static struct rio_ops tsi721_rio_ops = {
+ .lcread = tsi721_lcread,
+ .lcwrite = tsi721_lcwrite,
+ .cread = tsi721_cread_dma,
+ .cwrite = tsi721_cwrite_dma,
+ .dsend = tsi721_dsend,
+ .open_inb_mbox = tsi721_open_inb_mbox,
+ .close_inb_mbox = tsi721_close_inb_mbox,
+ .open_outb_mbox = tsi721_open_outb_mbox,
+ .close_outb_mbox = tsi721_close_outb_mbox,
+ .add_outb_message = tsi721_add_outb_message,
+ .add_inb_buffer = tsi721_add_inb_buffer,
+ .get_inb_message = tsi721_get_inb_message,
+ .map_inb = tsi721_rio_map_inb_mem,
+ .unmap_inb = tsi721_rio_unmap_inb_mem,
+ .pwenable = tsi721_pw_enable,
+ .query_mport = tsi721_query_mport,
+ .map_outb = tsi721_map_outb_win,
+ .unmap_outb = tsi721_unmap_outb_win,
+};
+
+static void tsi721_mport_release(struct device *dev)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id);
+}
+
+/**
+ * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 as RapidIO master port.
+ */
+static int tsi721_setup_mport(struct tsi721_device *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ int err = 0;
+ struct rio_mport *mport = &priv->mport;
+
+ err = rio_mport_initialize(mport);
+ if (err)
+ return err;
+
+ mport->ops = &tsi721_rio_ops;
+ mport->index = 0;
+ mport->sys_size = 0; /* small system */
+ mport->priv = (void *)priv;
+ mport->phys_efptr = 0x100;
+ mport->phys_rmap = 1;
+ mport->dev.parent = &pdev->dev;
+ mport->dev.release = tsi721_mport_release;
+
+ INIT_LIST_HEAD(&mport->dbells);
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
+ snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
+ dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
+
+ /* Hook up interrupt handler */
+
+#ifdef CONFIG_PCI_MSI
+ if (!tsi721_enable_msix(priv))
+ priv->flags |= TSI721_USING_MSIX;
+ else if (!pci_enable_msi(pdev))
+ priv->flags |= TSI721_USING_MSI;
+ else
+ tsi_debug(MPORT, &pdev->dev,
+ "MSI/MSI-X is not available. Using legacy INTx.");
+#endif /* CONFIG_PCI_MSI */
+
+ err = tsi721_request_irq(priv);
+
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)",
+ pdev->irq, err);
+ return err;
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ err = tsi721_register_dma(priv);
+ if (err)
+ goto err_exit;
+#endif
+ /* Enable SRIO link */
+ iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
+ TSI721_DEVCTL_SRBOOT_CMPL,
+ priv->regs + TSI721_DEVCTL);
+
+ if (mport->host_deviceid >= 0)
+ iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
+ RIO_PORT_GEN_DISCOVERED,
+ priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+ else
+ iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+
+ err = rio_register_mport(mport);
+ if (err) {
+ tsi721_unregister_dma(priv);
+ goto err_exit;
+ }
+
+ return 0;
+
+err_exit:
+ tsi721_free_irq(priv);
+ return err;
+}
+
+static int tsi721_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct tsi721_device *priv;
+ int err;
+
+ priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ goto err_exit;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ tsi_err(&pdev->dev, "Failed to enable PCI device");
+ goto err_clean;
+ }
+
+ priv->pdev = pdev;
+
+#ifdef DEBUG
+ {
+ int i;
+
+ for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+ tsi_debug(INIT, &pdev->dev, "res%d %pR",
+ i, &pdev->resource[i]);
+ }
+ }
+#endif
+ /*
+ * Verify BAR configuration
+ */
+
+ /* BAR_0 (registers) must be 512KB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
+ tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
+ tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /*
+ * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
+ * space.
+ * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
+ * It may be a good idea to keep them disabled using HW configuration
+ * to save PCI memory space.
+ */
+
+ priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0;
+
+ if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) {
+ if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH)
+ tsi_debug(INIT, &pdev->dev,
+ "Prefetchable OBW BAR2 will not be used");
+ else {
+ priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2);
+ priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2);
+ }
+ }
+
+ if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) {
+ if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH)
+ tsi_debug(INIT, &pdev->dev,
+ "Prefetchable OBW BAR4 will not be used");
+ else {
+ priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4);
+ priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4);
+ }
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to obtain PCI resources");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ priv->regs = pci_ioremap_bar(pdev, BAR_0);
+ if (!priv->regs) {
+ tsi_err(&pdev->dev, "Unable to map device registers space");
+ err = -ENOMEM;
+ goto err_free_res;
+ }
+
+ priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
+ if (!priv->odb_base) {
+ tsi_err(&pdev->dev, "Unable to map outbound doorbells space");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ /* Configure DMA attributes. */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to set DMA mask");
+ goto err_unmap_bars;
+ }
+
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
+ } else {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
+ }
+
+ BUG_ON(!pci_is_pcie(pdev));
+
+ /* Clear "no snoop" and "relaxed ordering" bits. */
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
+
+ /* Override PCIe Maximum Read Request Size setting if requested */
+ if (pcie_mrrs >= 0) {
+ if (pcie_mrrs <= 5)
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12);
+ else
+ tsi_info(&pdev->dev,
+ "Invalid MRRS override value %d", pcie_mrrs);
+ }
+
+ /* Adjust PCIe completion timeout. */
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2);
+
+ /*
+ * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
+ */
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
+ TSI721_MSIXTBL_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
+ TSI721_MSIXPBA_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
+ /* End of FIXUP */
+
+ tsi721_disable_ints(priv);
+
+ tsi721_init_pc2sr_mapping(priv);
+ tsi721_init_sr2pc_mapping(priv);
+
+ if (tsi721_bdma_maint_init(priv)) {
+ tsi_err(&pdev->dev, "BDMA initialization failed");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ err = tsi721_doorbell_init(priv);
+ if (err)
+ goto err_free_bdma;
+
+ tsi721_port_write_init(priv);
+
+ err = tsi721_messages_init(priv);
+ if (err)
+ goto err_free_consistent;
+
+ err = tsi721_setup_mport(priv);
+ if (err)
+ goto err_free_consistent;
+
+ pci_set_drvdata(pdev, priv);
+ tsi721_interrupts_init(priv);
+
+ return 0;
+
+err_free_consistent:
+ tsi721_port_write_free(priv);
+ tsi721_doorbell_free(priv);
+err_free_bdma:
+ tsi721_bdma_maint_free(priv);
+err_unmap_bars:
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+err_free_res:
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+err_disable_pdev:
+ pci_disable_device(pdev);
+err_clean:
+ kfree(priv);
+err_exit:
+ return err;
+}
+
+static void tsi721_remove(struct pci_dev *pdev)
+{
+ struct tsi721_device *priv = pci_get_drvdata(pdev);
+
+ tsi_debug(EXIT, &pdev->dev, "enter");
+
+ tsi721_disable_ints(priv);
+ tsi721_free_irq(priv);
+ flush_scheduled_work();
+ rio_unregister_mport(&priv->mport);
+
+ tsi721_unregister_dma(priv);
+ tsi721_bdma_maint_free(priv);
+ tsi721_doorbell_free(priv);
+ tsi721_port_write_free(priv);
+ tsi721_close_sr2pc_mapping(priv);
+
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ pci_disable_msix(priv->pdev);
+ else if (priv->flags & TSI721_USING_MSI)
+ pci_disable_msi(priv->pdev);
+#endif
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ kfree(priv);
+ tsi_debug(EXIT, &pdev->dev, "exit");
+}
+
+static void tsi721_shutdown(struct pci_dev *pdev)
+{
+ struct tsi721_device *priv = pci_get_drvdata(pdev);
+
+ tsi_debug(EXIT, &pdev->dev, "enter");
+
+ tsi721_disable_ints(priv);
+ tsi721_dma_stop_all(priv);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id tsi721_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
+ { 0, } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
+
+static struct pci_driver tsi721_driver = {
+ .name = "tsi721",
+ .id_table = tsi721_pci_tbl,
+ .probe = tsi721_probe,
+ .remove = tsi721_remove,
+ .shutdown = tsi721_shutdown,
+};
+
+module_pci_driver(tsi721_driver);
+
+MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");