diff --git a/src/kernel/linux/v4.14/drivers/rtc/Kconfig b/src/kernel/linux/v4.14/drivers/rtc/Kconfig
new file mode 100644
index 0000000..fd5d000
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/Kconfig
@@ -0,0 +1,1811 @@
+#
+# RTC class/drivers configuration
+#
+
+config RTC_LIB
+	bool
+
+config RTC_MC146818_LIB
+	bool
+	select RTC_LIB
+
+menuconfig RTC_CLASS
+	bool "Real Time Clock"
+	default n
+	depends on !S390 && !UML
+	select RTC_LIB
+	help
+	  Generic RTC class support. If you say yes here, you will
+	  be allowed to plug one or more RTCs to your system. You will
+	  probably want to enable one or more of the interfaces below.
+
+if RTC_CLASS
+
+config RTC_HCTOSYS
+	bool "Set system time from RTC on startup and resume"
+	default y
+	help
+	  If you say yes here, the system time (wall clock) will be set using
+	  the value read from a specified RTC device. This is useful to avoid
+	  unnecessary fsck runs at boot time, and to network better.
+
+config RTC_HCTOSYS_DEVICE
+	string "RTC used to set the system time"
+	depends on RTC_HCTOSYS
+	default "rtc0"
+	help
+	  The RTC device that will be used to (re)initialize the system
+	  clock, usually rtc0. Initialization is done when the system
+	  starts up, and when it resumes from a low power state. This
+	  device should record time in UTC, since the kernel won't do
+	  timezone correction.
+
+	  The driver for this RTC device must be loaded before late_initcall
+	  functions run, so it must usually be statically linked.
+
+	  This clock should be battery-backed, so that it reads the correct
+	  time when the system boots from a power-off state. Otherwise, your
+	  system will need an external clock source (like an NTP server).
+
+	  If the clock you specify here is not battery backed, it may still
+	  be useful to reinitialize system time when resuming from system
+	  sleep states. Do not specify an RTC here unless it stays powered
+	  during all this system's supported sleep states.
+
+config RTC_SYSTOHC
+	bool "Set the RTC time based on NTP synchronization"
+	default y
+	help
+	  If you say yes here, the system time (wall clock) will be stored
+	  in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
+	  minutes if userspace reports synchronized NTP status.
+
+config RTC_SYSTOHC_DEVICE
+	string "RTC used to synchronize NTP adjustment"
+	depends on RTC_SYSTOHC
+	default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
+	default "rtc0"
+	help
+	  The RTC device used for NTP synchronization. The main difference
+	  between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this
+	  one can sleep when setting time, because it runs in the workqueue
+	  context.
+
+config RTC_DEBUG
+	bool "RTC debug support"
+	help
+	  Say yes here to enable debugging support in the RTC framework
+	  and individual RTC drivers.
+
+config RTC_NVMEM
+	bool "RTC non volatile storage support"
+	select NVMEM
+	default RTC_CLASS
+	help
+	  Say yes here to add support for the non volatile (often battery
+	  backed) storage present on RTCs.
+
+comment "RTC interfaces"
+
+config RTC_INTF_SYSFS
+	bool "/sys/class/rtc/rtcN (sysfs)"
+	depends on SYSFS
+	default RTC_CLASS
+	help
+	  Say yes here if you want to use your RTCs using sysfs interfaces,
+	  /sys/class/rtc/rtc0 through /sys/.../rtcN.
+
+	  If unsure, say Y.
+
+config RTC_INTF_PROC
+	bool "/proc/driver/rtc (procfs for rtcN)"
+	depends on PROC_FS
+	default RTC_CLASS
+	help
+	  Say yes here if you want to use your system clock RTC through
+	  the proc interface, /proc/driver/rtc.
+	  Other RTCs will not be available through that API.
+	  If there is no RTC for the system clock, then the first RTC(rtc0)
+	  is used by default.
+
+	  If unsure, say Y.
+
+config RTC_INTF_DEV
+	bool "/dev/rtcN (character devices)"
+	default RTC_CLASS
+	help
+	  Say yes here if you want to use your RTCs using the /dev
+	  interfaces, which "udev" sets up as /dev/rtc0 through
+	  /dev/rtcN.
+
+	  You may want to set up a symbolic link so one of these
+	  can be accessed as /dev/rtc, which is a name
+	  expected by "hwclock" and some other programs. Recent
+	  versions of "udev" are known to set up the symlink for you.
+
+	  If unsure, say Y.
+
+config RTC_INTF_DEV_UIE_EMUL
+	bool "RTC UIE emulation on dev interface"
+	depends on RTC_INTF_DEV
+	help
+	  Provides an emulation for RTC_UIE if the underlying rtc chip
+	  driver does not expose RTC_UIE ioctls. Those requests generate
+	  once-per-second update interrupts, used for synchronization.
+
+	  The emulation code will read the time from the hardware
+	  clock several times per second, please enable this option
+	  only if you know that you really need it.
+
+config RTC_DRV_TEST
+	tristate "Test driver/device"
+	help
+	  If you say yes here you get support for the
+	  RTC test driver. It's a software RTC which can be
+	  used to test the RTC subsystem APIs. It gets
+	  the time from the system clock.
+	  You want this driver only if you are doing development
+	  on the RTC subsystem. Please read the source code
+	  for further details.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-test.
+
+comment "I2C RTC drivers"
+
+if I2C
+
+config RTC_DRV_88PM860X
+	tristate "Marvell 88PM860x"
+	depends on MFD_88PM860X
+	help
+	  If you say yes here you get support for RTC function in Marvell
+	  88PM860x chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-88pm860x.
+
+config RTC_DRV_88PM80X
+	tristate "Marvell 88PM80x"
+	depends on MFD_88PM800
+	help
+	  If you say yes here you get support for RTC function in Marvell
+	  88PM80x chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-88pm80x.
+
+config RTC_DRV_ABB5ZES3
+	select REGMAP_I2C
+	tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
+	help
+	  If you say yes here you get support for the Abracon
+	  AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ab-b5ze-s3.
+
+config RTC_DRV_ABX80X
+	tristate "Abracon ABx80x"
+	help
+	  If you say yes here you get support for Abracon AB080X and AB180X
+	  families of ultra-low-power  battery- and capacitor-backed real-time
+	  clock chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-abx80x.
+
+config RTC_DRV_AC100
+	tristate "X-Powers AC100"
+	depends on MFD_AC100
+	help
+	  If you say yes here you get support for the real-time clock found
+	  in X-Powers AC100 family peripheral ICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ac100.
+
+config RTC_DRV_BRCMSTB
+	tristate "Broadcom STB wake-timer"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BRCMSTB || BMIPS_GENERIC
+	help
+	  If you say yes here you get support for the wake-timer found on
+	  Broadcom STB SoCs (BCM7xxx).
+
+	  This driver can also be built as a module. If so, the module will
+	  be called rtc-brcmstb-waketimer.
+
+config RTC_DRV_AS3722
+	tristate "ams AS3722 RTC driver"
+	depends on MFD_AS3722
+	help
+	  If you say yes here you get support for the RTC of ams AS3722 PMIC
+	  chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-as3722.
+
+config RTC_DRV_DS1307
+	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
+	help
+	  If you say yes here you get support for various compatible RTC
+	  chips (often with battery backup) connected with I2C. This driver
+	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, DS1341,
+	  ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
+	  In some cases the RTC must already have been initialized (by
+	  manufacturing or a bootloader).
+
+	  The first seven registers on these chips hold an RTC, and other
+	  registers may add features such as NVRAM, a trickle charger for
+	  the RTC/NVRAM backup power, and alarms. NVRAM is visible in
+	  sysfs, but other chip features may not be available.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1307.
+
+config RTC_DRV_DS1307_HWMON
+	bool "HWMON support for rtc-ds1307"
+	depends on RTC_DRV_DS1307 && HWMON
+	depends on !(RTC_DRV_DS1307=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose temperature sensor data on
+	  rtc-ds1307 (only DS3231)
+
+config RTC_DRV_DS1307_CENTURY
+	bool "Century bit support for rtc-ds1307"
+	depends on RTC_DRV_DS1307
+	default n
+	help
+	  The DS1307 driver suffered from a bug where it was enabling the
+	  century bit inconditionnally but never used it when reading the time.
+	  It made the driver unable to support dates beyond 2099.
+	  Setting this option will add proper support for the century bit but if
+	  the time was previously set using a kernel predating this option,
+	  reading the date will return a date in the next century.
+	  To solve that, you could boot a kernel without this option set, set
+	  the RTC date and then boot a kernel with this option set.
+
+config RTC_DRV_DS1374
+	tristate "Dallas/Maxim DS1374"
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1374 real-time clock chips. If an interrupt is associated
+	  with the device, the alarm functionality is supported.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1374.
+
+config RTC_DRV_DS1374_WDT
+	bool "Dallas/Maxim DS1374 watchdog timer"
+	depends on RTC_DRV_DS1374
+	help
+	  If you say Y here you will get support for the
+	  watchdog timer in the Dallas Semiconductor DS1374
+	  real-time clock chips.
+
+config RTC_DRV_DS1672
+	tristate "Dallas/Maxim DS1672"
+	help
+	  If you say yes here you get support for the
+	  Dallas/Maxim DS1672 timekeeping chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1672.
+
+config RTC_DRV_HYM8563
+	tristate "Haoyu Microelectronics HYM8563"
+	depends on OF
+	help
+	  Say Y to enable support for the HYM8563 I2C RTC chip. Apart
+	  from the usual rtc functions it provides a clock output of
+	  up to 32kHz.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-hym8563.
+
+config RTC_DRV_LP8788
+	tristate "TI LP8788 RTC driver"
+	depends on MFD_LP8788
+	help
+	  Say Y to enable support for the LP8788 RTC/ALARM driver.
+
+config RTC_DRV_MAX6900
+	tristate "Maxim MAX6900"
+	help
+	  If you say yes here you will get support for the
+	  Maxim MAX6900 I2C RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max6900.
+
+config RTC_DRV_MAX8907
+	tristate "Maxim MAX8907"
+	depends on MFD_MAX8907 || COMPILE_TEST
+	select REGMAP_IRQ
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8907 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8907.
+
+config RTC_DRV_MAX8925
+	tristate "Maxim MAX8925"
+	depends on MFD_MAX8925
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8925 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8925.
+
+config RTC_DRV_MAX8998
+	tristate "Maxim MAX8998"
+	depends on MFD_MAX8998
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8998 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8998.
+
+config RTC_DRV_MAX8997
+	tristate "Maxim MAX8997"
+	depends on MFD_MAX8997
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8997 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8997.
+
+config RTC_DRV_MAX77686
+	tristate "Maxim MAX77686"
+	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max77686.
+
+config RTC_DRV_RK808
+	tristate "Rockchip RK805/RK808/RK818 RTC"
+	depends on MFD_RK808
+	help
+	  If you say yes here you will get support for the
+	  RTC of RK805, RK808 and RK818 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rk808-rtc.
+
+config RTC_DRV_RS5C372
+	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
+	help
+	  If you say yes here you get support for the
+	  Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rs5c372.
+
+config RTC_DRV_ISL1208
+	tristate "Intersil ISL1208"
+	help
+	  If you say yes here you get support for the
+	  Intersil ISL1208 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-isl1208.
+
+config RTC_DRV_ISL12022
+	tristate "Intersil ISL12022"
+	help
+	  If you say yes here you get support for the
+	  Intersil ISL12022 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-isl12022.
+
+config RTC_DRV_X1205
+	tristate "Xicor/Intersil X1205"
+	help
+	  If you say yes here you get support for the
+	  Xicor/Intersil X1205 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-x1205.
+
+config RTC_DRV_PCF8523
+	tristate "NXP PCF8523"
+	help
+	  If you say yes here you get support for the NXP PCF8523 RTC
+	  chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf8523.
+
+config RTC_DRV_PCF85063
+	tristate "NXP PCF85063"
+	help
+	  If you say yes here you get support for the PCF85063 RTC chip
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf85063.
+
+config RTC_DRV_PCF8563
+	tristate "Philips PCF8563/Epson RTC8564"
+	help
+	  If you say yes here you get support for the
+	  Philips PCF8563 RTC chip. The Epson RTC8564
+	  should work as well.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf8563.
+
+config RTC_DRV_PCF8583
+	tristate "Philips PCF8583"
+	help
+	  If you say yes here you get support for the Philips PCF8583
+	  RTC chip found on Acorn RiscPCs. This driver supports the
+	  platform specific method of retrieving the current year from
+	  the RTC's SRAM. It will work on other platforms with the same
+	  chip, but the year will probably have to be tweaked.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf8583.
+
+config RTC_DRV_M41T80
+	tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
+	help
+	  If you say Y here you will get support for the ST M41T60
+	  and M41T80 RTC chips series. Currently, the following chips are
+	  supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+	  M41ST85, M41ST87, and MicroCrystal RV4162.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t80.
+
+config RTC_DRV_M41T80_WDT
+	bool "ST M41T65/M41T80 series RTC watchdog timer"
+	depends on RTC_DRV_M41T80
+	help
+	  If you say Y here you will get support for the
+	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
+
+config RTC_DRV_BQ32K
+	tristate "TI BQ32000"
+	help
+	  If you say Y here you will get support for the TI
+	  BQ32000 I2C RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-bq32k.
+
+config RTC_DRV_DM355EVM
+	tristate "TI DaVinci DM355 EVM RTC"
+	depends on MFD_DM355EVM_MSP
+	help
+	  Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
+config RTC_DRV_TWL92330
+	bool "TI TWL92330/Menelaus"
+	depends on MENELAUS
+	help
+	  If you say yes here you get support for the RTC on the
+	  TWL92330 "Menelaus" power management chip, used with OMAP2
+	  platforms. The support is integrated with the rest of
+	  the Menelaus driver; it's not separate module.
+
+config RTC_DRV_TWL4030
+	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
+	depends on TWL4030_CORE
+	depends on OF
+	help
+	  If you say yes here you get support for the RTC on the
+	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-twl.
+
+config RTC_DRV_PALMAS
+	tristate "TI Palmas RTC driver"
+	depends on MFD_PALMAS
+	help
+	  If you say yes here you get support for the RTC of TI PALMA series PMIC
+	  chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-palma.
+
+config RTC_DRV_TPS6586X
+	tristate "TI TPS6586X RTC driver"
+	depends on MFD_TPS6586X
+	help
+	  TI Power Management IC TPS6586X supports RTC functionality
+	  along with alarm. This driver supports the RTC driver for
+	  the TPS6586X RTC module.
+
+config RTC_DRV_TPS65910
+	tristate "TI TPS65910 RTC driver"
+	depends on RTC_CLASS && MFD_TPS65910
+	help
+	  If you say yes here you get support for the RTC on the
+	  TPS65910 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-tps65910.
+
+config RTC_DRV_TPS80031
+	tristate "TI TPS80031/TPS80032 RTC driver"
+	depends on MFD_TPS80031
+	help
+	  TI Power Management IC TPS80031 supports RTC functionality
+	  along with alarm. This driver supports the RTC driver for
+	  the TPS80031 RTC module.
+
+config RTC_DRV_RC5T583
+	tristate "RICOH 5T583 RTC driver"
+	depends on MFD_RC5T583
+	help
+	  If you say yes here you get support for the RTC on the
+	  RICOH 5T583 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rc5t583.
+
+config RTC_DRV_S35390A
+	tristate "Seiko Instruments S-35390A"
+	select BITREVERSE
+	help
+	  If you say yes here you will get support for the Seiko
+	  Instruments S-35390A.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-s35390a.
+
+config RTC_DRV_FM3130
+	tristate "Ramtron FM3130"
+	help
+	  If you say Y here you will get support for the
+	  Ramtron FM3130 RTC chips.
+	  Ramtron FM3130 is a chip with two separate devices inside,
+	  RTC clock and FRAM. This driver provides only RTC functionality.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-fm3130.
+
+config RTC_DRV_RX8010
+	tristate "Epson RX8010SJ"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Epson RX8010SJ RTC
+	  chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rx8010.
+
+config RTC_DRV_RX8581
+	tristate "Epson RX-8581"
+	help
+	  If you say yes here you will get support for the Epson RX-8581.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-rx8581.
+
+config RTC_DRV_RX8025
+	tristate "Epson RX-8025SA/NB"
+	help
+	  If you say yes here you get support for the Epson
+	  RX-8025SA/NB RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rx8025.
+
+config RTC_DRV_EM3027
+	tristate "EM Microelectronic EM3027"
+	help
+	  If you say yes here you get support for the EM
+	  Microelectronic EM3027 RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-em3027.
+
+config RTC_DRV_RV8803
+	tristate "Micro Crystal RV8803, Epson RX8900"
+	help
+	  If you say yes here you get support for the Micro Crystal RV8803 and
+	  Epson RX8900 RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rv8803.
+
+config RTC_DRV_S5M
+	tristate "Samsung S2M/S5M series"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	select REGMAP_IRQ
+	help
+	  If you say yes here you will get support for the
+	  RTC of Samsung S2MPS14 and S5M PMIC series.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-s5m.
+
+endif # I2C
+
+comment "SPI RTC drivers"
+
+if SPI_MASTER
+
+config RTC_DRV_M41T93
+	tristate "ST M41T93"
+	help
+	  If you say yes here you will get support for the
+	  ST M41T93 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t93.
+
+config RTC_DRV_M41T94
+	tristate "ST M41T94"
+	help
+	  If you say yes here you will get support for the
+	  ST M41T94 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t94.
+
+config RTC_DRV_DS1302
+	tristate "Dallas/Maxim DS1302"
+	depends on SPI
+	help
+	  If you say yes here you get support for the Dallas DS1302 RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1302.
+
+config RTC_DRV_DS1305
+	tristate "Dallas/Maxim DS1305/DS1306"
+	help
+	  Select this driver to get support for the Dallas/Maxim DS1305
+	  and DS1306 real time clock chips. These support a trickle
+	  charger, alarms, and NVRAM in addition to the clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1305.
+
+config RTC_DRV_DS1343
+	select REGMAP_SPI
+	tristate "Dallas/Maxim DS1343/DS1344"
+	help
+	  If you say yes here you get support for the
+	  Dallas/Maxim DS1343 and DS1344 real time clock chips.
+	  Support for trickle charger, alarm is provided.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1343.
+
+config RTC_DRV_DS1347
+	select REGMAP_SPI
+	tristate "Dallas/Maxim DS1347"
+	help
+	  If you say yes here you get support for the
+	  Dallas/Maxim DS1347 chips.
+
+	  This driver only supports the RTC feature, and not other chip
+	  features such as alarms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1347.
+
+config RTC_DRV_DS1390
+	tristate "Dallas/Maxim DS1390/93/94"
+	help
+	  If you say yes here you get support for the
+	  Dallas/Maxim DS1390/93/94 chips.
+
+	  This driver supports the RTC feature and trickle charging but not
+	  other chip features such as alarms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1390.
+
+config RTC_DRV_MAX6916
+	tristate "Maxim MAX6916"
+	help
+	  If you say yes here you will get support for the
+	  Maxim MAX6916 SPI RTC chip.
+
+	  This driver only supports the RTC feature, and not other chip
+	  features such as alarms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max6916.
+
+config RTC_DRV_R9701
+	tristate "Epson RTC-9701JE"
+	help
+	  If you say yes here you will get support for the
+	  Epson RTC-9701JE SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-r9701.
+
+config RTC_DRV_RX4581
+	tristate "Epson RX-4581"
+	help
+	  If you say yes here you will get support for the Epson RX-4581.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-rx4581.
+
+config RTC_DRV_RX6110
+	tristate "Epson RX-6110"
+	select REGMAP_SPI
+	help
+	  If you say yes here you will get support for the Epson RX-6610.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-rx6110.
+
+config RTC_DRV_RS5C348
+	tristate "Ricoh RS5C348A/B"
+	help
+	  If you say yes here you get support for the
+	  Ricoh RS5C348A and RS5C348B RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rs5c348.
+
+config RTC_DRV_MAX6902
+	tristate "Maxim MAX6902"
+	help
+	  If you say yes here you will get support for the
+	  Maxim MAX6902 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max6902.
+
+config RTC_DRV_PCF2123
+	tristate "NXP PCF2123"
+	help
+	  If you say yes here you get support for the NXP PCF2123
+	  RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf2123.
+
+config RTC_DRV_MCP795
+	tristate "Microchip MCP795"
+	help
+	  If you say yes here you will get support for the Microchip MCP795.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-mcp795.
+
+endif # SPI_MASTER
+
+#
+# Helper to resolve issues with configs that have SPI enabled but I2C
+# modular.  See SND_SOC_I2C_AND_SPI for more information
+#
+config RTC_I2C_AND_SPI
+	tristate
+	default m if I2C=m
+	default y if I2C=y
+	default y if SPI_MASTER=y
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
+
+comment "SPI and I2C RTC drivers"
+
+config RTC_DRV_DS3232
+	tristate "Dallas/Maxim DS3232/DS3234"
+	depends on RTC_I2C_AND_SPI
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
+	  with the device, the alarm functionality is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called rtc-ds3232.
+
+config RTC_DRV_DS3232_HWMON
+	bool "HWMON support for Dallas/Maxim DS3232/DS3234"
+	depends on RTC_DRV_DS3232 && HWMON && !(RTC_DRV_DS3232=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose temperature sensor data on
+	  rtc-ds3232
+
+config RTC_DRV_PCF2127
+	tristate "NXP PCF2127"
+	depends on RTC_I2C_AND_SPI
+	help
+	  If you say yes here you get support for the NXP PCF2127/29 RTC
+	  chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf2127.
+
+config RTC_DRV_RV3029C2
+	tristate "Micro Crystal RV3029/3049"
+	depends on RTC_I2C_AND_SPI
+	help
+	  If you say yes here you get support for the Micro Crystal
+	  RV3029 and RV3049 RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rv3029c2.
+
+config RTC_DRV_RV3029_HWMON
+	bool "HWMON support for RV3029/3049"
+	depends on RTC_DRV_RV3029C2 && HWMON
+	depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose temperature sensor data on
+	  rtc-rv3029.
+
+comment "Platform RTC drivers"
+
+# this 'CMOS' RTC driver is arch dependent because it requires
+# <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
+# global rtc_lock ... it's not yet just another platform_device.
+
+config RTC_DRV_CMOS
+	tristate "PC-style 'CMOS'"
+	depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300
+	default y if X86
+	select RTC_MC146818_LIB
+	help
+	  Say "yes" here to get direct support for the real time clock
+	  found in every PC or ACPI-based system, and some other boards.
+	  Specifically the original MC146818, compatibles like those in
+	  PC south bridges, the DS12887 or M48T86, some multifunction
+	  or LPC bus chips, and so on.
+
+	  Your system will need to define the platform device used by
+	  this driver, otherwise it won't be accessible. This means
+	  you can safely enable this driver if you don't know whether
+	  or not your board has this kind of hardware.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-cmos.
+
+config RTC_DRV_ALPHA
+	bool "Alpha PC-style CMOS"
+	depends on ALPHA
+	select RTC_MC146818_LIB
+	default y
+	help
+	  Direct support for the real-time clock found on every Alpha
+	  system, specifically MC146818 compatibles.  If in doubt, say Y.
+
+config RTC_DRV_VRTC
+	tristate "Virtual RTC for Intel MID platforms"
+	depends on X86_INTEL_MID
+	default y if X86_INTEL_MID
+
+	help
+	Say "yes" here to get direct support for the real time clock
+	found on Moorestown platforms. The VRTC is a emulated RTC that
+	derives its clock source from a real RTC in the PMIC. The MC146818
+	style programming interface is mostly conserved, but any
+	updates are done via IPC calls to the system controller FW.
+
+config RTC_DRV_DS1216
+	tristate "Dallas DS1216"
+	depends on SNI_RM
+	help
+	  If you say yes here you get support for the Dallas DS1216 RTC chips.
+
+config RTC_DRV_DS1286
+	tristate "Dallas DS1286"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the Dallas DS1286 RTC chips.
+
+config RTC_DRV_DS1511
+	tristate "Dallas DS1511"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the
+	  Dallas DS1511 timekeeping/watchdog chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1511.
+
+config RTC_DRV_DS1553
+	tristate "Maxim/Dallas DS1553"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the
+	  Maxim/Dallas DS1553 timekeeping chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1553.
+
+config RTC_DRV_DS1685_FAMILY
+	tristate "Dallas/Maxim DS1685 Family"
+	help
+	  If you say yes here you get support for the Dallas/Maxim DS1685
+	  family of real time chips.  This family includes the DS1685/DS1687,
+	  DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
+	  DS17885/DS17887 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1685.
+
+choice
+	prompt "Subtype"
+	depends on RTC_DRV_DS1685_FAMILY
+	default RTC_DRV_DS1685
+
+config RTC_DRV_DS1685
+	bool "DS1685/DS1687"
+	help
+	  This enables support for the Dallas/Maxim DS1685/DS1687 real time
+	  clock chip.
+
+	  This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
+	  systems, as well as EPPC-405-UC modules by electronic system design
+	  GmbH.
+
+config RTC_DRV_DS1689
+	bool "DS1689/DS1693"
+	help
+	  This enables support for the Dallas/Maxim DS1689/DS1693 real time
+	  clock chip.
+
+	  This is an older RTC chip, supplanted by the DS1685/DS1687 above,
+	  which supports a few minor features such as Vcc, Vbat, and Power
+	  Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
+
+	  It also works for the even older DS1688/DS1691 RTC chips, which are
+	  virtually the same and carry the same model number.  Both chips
+	  have 114 bytes of user NVRAM.
+
+config RTC_DRV_DS17285
+	bool "DS17285/DS17287"
+	help
+	  This enables support for the Dallas/Maxim DS17285/DS17287 real time
+	  clock chip.
+
+	  This chip features 2kb of extended NV-SRAM.  It may possibly be
+	  found in some SGI O2 systems (rare).
+
+config RTC_DRV_DS17485
+	bool "DS17485/DS17487"
+	help
+	  This enables support for the Dallas/Maxim DS17485/DS17487 real time
+	  clock chip.
+
+	  This chip features 4kb of extended NV-SRAM.
+
+config RTC_DRV_DS17885
+	bool "DS17885/DS17887"
+	help
+	  This enables support for the Dallas/Maxim DS17885/DS17887 real time
+	  clock chip.
+
+	  This chip features 8kb of extended NV-SRAM.
+
+endchoice
+
+config RTC_DS1685_PROC_REGS
+	bool "Display register values in /proc"
+	depends on RTC_DRV_DS1685_FAMILY && PROC_FS
+	help
+	  Enable this to display a readout of all of the RTC registers in
+	  /proc/drivers/rtc.  Keep in mind that this can potentially lead
+	  to lost interrupts, as reading Control Register C will clear
+	  all pending IRQ flags.
+
+	  Unless you are debugging this driver, choose N.
+
+config RTC_DS1685_SYSFS_REGS
+	bool "SysFS access to RTC register bits"
+	depends on RTC_DRV_DS1685_FAMILY && SYSFS
+	help
+	  Enable this to provide access to the RTC control register bits
+	  in /sys.  Some of the bits are read-write, others are read-only.
+
+	  Keep in mind that reading Control C's bits automatically clears
+	  all pending IRQ flags - this can cause lost interrupts.
+
+	  If you know that you need access to these bits, choose Y, Else N.
+
+config RTC_DRV_DS1742
+	tristate "Maxim/Dallas DS1742/1743"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the
+	  Maxim/Dallas DS1742/1743 timekeeping chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1742.
+
+config RTC_DRV_DS2404
+	tristate "Maxim/Dallas DS2404"
+	help
+	  If you say yes here you get support for the
+	  Dallas DS2404 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds2404.
+
+config RTC_DRV_DA9052
+	tristate "Dialog DA9052/DA9053 RTC"
+	depends on PMIC_DA9052
+	help
+	  Say y here to support the RTC driver for Dialog Semiconductor
+	  DA9052-BC and DA9053-AA/Bx PMICs.
+
+config RTC_DRV_DA9055
+	tristate "Dialog Semiconductor DA9055 RTC"
+	depends on MFD_DA9055
+	help
+	  If you say yes here you will get support for the
+	  RTC of the Dialog DA9055 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-da9055
+
+config RTC_DRV_DA9063
+	tristate "Dialog Semiconductor DA9063/DA9062 RTC"
+	depends on MFD_DA9063 || MFD_DA9062
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  for the Dialog Semiconductor PMIC chips DA9063 and DA9062.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-da9063".
+
+config RTC_DRV_EFI
+	tristate "EFI RTC"
+	depends on EFI && !X86
+	help
+	  If you say yes here you will get support for the EFI
+	  Real Time Clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-efi.
+
+config RTC_DRV_STK17TA8
+	tristate "Simtek STK17TA8"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the
+	  Simtek STK17TA8 timekeeping chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-stk17ta8.
+
+config RTC_DRV_M48T86
+	tristate "ST M48T86/Dallas DS12887"
+	help
+	  If you say Y here you will get support for the
+	  ST M48T86 and Dallas DS12887 RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m48t86.
+
+config RTC_DRV_M48T35
+	tristate "ST M48T35"
+	depends on HAS_IOMEM
+	help
+	  If you say Y here you will get support for the
+	  ST M48T35 RTC chip.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-m48t35".
+
+config RTC_DRV_M48T59
+	tristate "ST M48T59/M48T08/M48T02"
+	depends on HAS_IOMEM
+	help
+	  If you say Y here you will get support for the
+	  ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
+
+	  These chips are usually found in Sun SPARC and UltraSPARC
+	  workstations.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-m48t59".
+
+config RTC_DRV_MSM6242
+	tristate "Oki MSM6242"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the Oki MSM6242
+	  timekeeping chip. It is used in some Amiga models (e.g. A2000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-msm6242.
+
+config RTC_DRV_BQ4802
+	tristate "TI BQ4802"
+	depends on HAS_IOMEM
+	help
+	  If you say Y here you will get support for the TI
+	  BQ4802 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-bq4802.
+
+config RTC_DRV_RP5C01
+	tristate "Ricoh RP5C01"
+	depends on HAS_IOMEM
+	help
+	  If you say yes here you get support for the Ricoh RP5C01
+	  timekeeping chip. It is used in some Amiga models (e.g. A3000
+	  and A4000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rp5c01.
+
+config RTC_DRV_V3020
+	tristate "EM Microelectronic V3020"
+	help
+	  If you say yes here you will get support for the
+	  EM Microelectronic v3020 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-v3020.
+
+config RTC_DRV_WM831X
+	tristate "Wolfson Microelectronics WM831x RTC"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM831X series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm831x".
+
+config RTC_DRV_WM8350
+	tristate "Wolfson Microelectronics WM8350 RTC"
+	depends on MFD_WM8350
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM8350.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm8350".
+
+config RTC_DRV_SPEAR
+	tristate "SPEAR ST RTC"
+	depends on PLAT_SPEAR || COMPILE_TEST
+	default y
+	help
+	 If you say Y here you will get support for the RTC found on
+	 spear
+
+config RTC_DRV_PCF50633
+	depends on MFD_PCF50633
+	tristate "NXP PCF50633 RTC"
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NXP PCF50633 used in embedded systems.
+
+config RTC_DRV_AB3100
+	tristate "ST-Ericsson AB3100 RTC"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_AB8500
+	tristate "ST-Ericsson AB8500 RTC"
+	depends on AB8500_CORE
+	select RTC_INTF_DEV
+	select RTC_INTF_DEV_UIE_EMUL
+	help
+	  Select this to enable the ST-Ericsson AB8500 power management IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_NUC900
+	tristate "NUC910/NUC920 RTC driver"
+	depends on ARCH_W90X900 || COMPILE_TEST
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NUC910/NUC920 used in embedded systems.
+
+config RTC_DRV_OPAL
+	tristate "IBM OPAL RTC driver"
+	depends on PPC_POWERNV
+	default y
+	help
+	  If you say yes here you get support for the PowerNV platform RTC
+	  driver based on OPAL interfaces.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-opal.
+
+config RTC_DRV_ZYNQMP
+	tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
+	depends on OF
+	help
+	  If you say yes here you get support for the RTC controller found on
+	  Xilinx Zynq Ultrascale+ MPSoC.
+
+comment "on-CPU RTC drivers"
+
+config RTC_DRV_ASM9260
+	tristate "Alphascale asm9260 RTC"
+	depends on MACH_ASM9260 || COMPILE_TEST
+	help
+	  If you say yes here you get support for the RTC on the
+	  Alphascale asm9260 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-asm9260.
+
+config RTC_DRV_DAVINCI
+	tristate "TI DaVinci RTC"
+	depends on ARCH_DAVINCI_DM365 || COMPILE_TEST
+	help
+	  If you say yes here you get support for the RTC on the
+	  DaVinci platforms (DM365).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-davinci.
+
+config RTC_DRV_DIGICOLOR
+	tristate "Conexant Digicolor RTC"
+	depends on ARCH_DIGICOLOR || COMPILE_TEST
+	help
+	  If you say yes here you get support for the RTC on Conexant
+	  Digicolor platforms. This currently includes the CX92755 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-digicolor.
+
+config RTC_DRV_IMXDI
+	tristate "Freescale IMX DryIce Real Time Clock"
+	depends on ARCH_MXC
+	help
+	   Support for Freescale IMX DryIce RTC
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-imxdi".
+
+config RTC_DRV_OMAP
+	tristate "TI OMAP Real Time Clock"
+	depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
+	depends on OF
+	depends on PINCTRL
+	select GENERIC_PINCONF
+	help
+	  Say "yes" here to support the on chip real time clock
+	  present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
+
+	  This driver can also be built as a module, if so, module
+	  will be called rtc-omap.
+
+config HAVE_S3C_RTC
+	bool
+	help
+	  This will include RTC support for Samsung SoCs. If
+	  you want to include RTC support for any machine, kindly
+	  select this in the respective mach-XXXX/Kconfig file.
+
+config RTC_DRV_S3C
+	tristate "Samsung S3C series SoC RTC"
+	depends on ARCH_S3C64XX || HAVE_S3C_RTC || COMPILE_TEST
+	help
+	  RTC (Realtime Clock) driver for the clock inbuilt into the
+	  Samsung S3C24XX series of SoCs. This can provide periodic
+	  interrupt rates from 1Hz to 64Hz for user programs, and
+	  wakeup from Alarm.
+
+	  The driver currently supports the common features on all the
+	  S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
+	  and S3C2442.
+
+	  This driver can also be build as a module. If so, the module
+	  will be called rtc-s3c.
+
+config RTC_DRV_EP93XX
+	tristate "Cirrus Logic EP93XX"
+	depends on ARCH_EP93XX || COMPILE_TEST
+	help
+	  If you say yes here you get support for the
+	  RTC embedded in the Cirrus Logic EP93XX processors.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ep93xx.
+
+config RTC_DRV_SA1100
+	tristate "SA11x0/PXA2xx/PXA910"
+	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
+	help
+	  If you say Y here you will get access to the real time clock
+	  built into your SA11x0 or PXA2xx CPU.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-sa1100.
+
+config RTC_DRV_SH
+	tristate "SuperH On-Chip RTC"
+	depends on SUPERH || ARCH_RENESAS
+	help
+	  Say Y here to enable support for the on-chip RTC found in
+	  most SuperH processors. This RTC is also found in RZ/A SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-sh.
+
+config RTC_DRV_VR41XX
+	tristate "NEC VR41XX"
+	depends on CPU_VR41XX || COMPILE_TEST
+	help
+	  If you say Y here you will get access to the real time clock
+	  built into your NEC VR41XX CPU.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-vr41xx.
+
+config RTC_DRV_PL030
+	tristate "ARM AMBA PL030 RTC"
+	depends on ARM_AMBA
+	help
+	  If you say Y here you will get access to ARM AMBA
+	  PrimeCell PL030 RTC found on certain ARM SOCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pl030.
+
+config RTC_DRV_PL031
+	tristate "ARM AMBA PL031 RTC"
+	depends on ARM_AMBA
+	help
+	  If you say Y here you will get access to ARM AMBA
+	  PrimeCell PL031 RTC found on certain ARM SOCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pl031.
+
+config RTC_DRV_AT32AP700X
+	tristate "AT32AP700X series RTC"
+	depends on PLATFORM_AT32AP || COMPILE_TEST
+	help
+	  Driver for the internal RTC (Realtime Clock) on Atmel AVR32
+	  AT32AP700x family processors.
+
+config RTC_DRV_AT91RM9200
+	tristate "AT91RM9200 or some AT91SAM9 RTC"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  Driver for the internal RTC (Realtime Clock) module found on
+	  Atmel AT91RM9200's and some  AT91SAM9 chips. On AT91SAM9 chips
+	  this is powered by the backup power supply.
+
+config RTC_DRV_AT91SAM9
+	tristate "AT91SAM9 RTT as RTC"
+	depends on ARCH_AT91 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
+	  can be used as an RTC thanks to the backup power supply (e.g. a
+	  small coin cell battery) which keeps this block and the GPBR
+	  (General Purpose Backup Registers) block powered when the device
+	  is shutdown.
+	  Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
+	  probably want to use the real RTC block instead of the "RTT as an
+	  RTC" driver.
+
+config RTC_DRV_AU1XXX
+	tristate "Au1xxx Counter0 RTC support"
+	depends on MIPS_ALCHEMY
+	help
+	  This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
+	  counter) to be used as a RTC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-au1xxx.
+
+config RTC_DRV_BFIN
+	tristate "Blackfin On-Chip RTC"
+	depends on BLACKFIN && !BF561
+	help
+	  If you say yes here you will get support for the
+	  Blackfin On-Chip Real Time Clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-bfin.
+
+config RTC_DRV_RS5C313
+	tristate "Ricoh RS5C313"
+	depends on SH_LANDISK
+	help
+	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+
+config RTC_DRV_GENERIC
+	tristate "Generic RTC support"
+	# Please consider writing a new RTC driver instead of using the generic
+	# RTC abstraction
+	depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST
+	help
+	  Say Y or M here to enable RTC support on systems using the generic
+	  RTC abstraction. If you do not know what you are doing, you should
+	  just say Y.
+
+config RTC_DRV_PXA
+	tristate "PXA27x/PXA3xx"
+	depends on ARCH_PXA
+	select RTC_DRV_SA1100
+	help
+         If you say Y here you will get access to the real time clock
+         built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
+         consisting of an SA1100 compatible RTC and the extended PXA RTC.
+
+	 This RTC driver uses PXA RTC registers available since pxa27x
+	 series (RDxR, RYxR) instead of legacy RCNR, RTAR.
+
+config RTC_DRV_VT8500
+	tristate "VIA/WonderMedia 85xx SoC RTC"
+	depends on ARCH_VT8500 || COMPILE_TEST
+	help
+	  If you say Y here you will get access to the real time clock
+	  built into your VIA VT8500 SoC or its relatives.
+
+
+config RTC_DRV_SUN4V
+	bool "SUN4V Hypervisor RTC"
+	depends on SPARC64
+	help
+	  If you say Y here you will get support for the Hypervisor
+	  based RTC on SUN4V systems.
+
+config RTC_DRV_SUN6I
+	bool "Allwinner A31 RTC"
+	default MACH_SUN6I || MACH_SUN8I
+	depends on COMMON_CLK
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  If you say Y here you will get support for the RTC found in
+	  some Allwinner SoCs like the A31 or the A64.
+
+config RTC_DRV_SUNXI
+	tristate "Allwinner sun4i/sun7i RTC"
+	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+	help
+	  If you say Y here you will get support for the RTC found on
+	  Allwinner A10/A20.
+
+config RTC_DRV_STARFIRE
+	bool "Starfire RTC"
+	depends on SPARC64
+	help
+	  If you say Y here you will get support for the RTC found on
+	  Starfire systems.
+
+config RTC_DRV_TX4939
+	tristate "TX4939 SoC"
+	depends on SOC_TX4939
+	help
+	  Driver for the internal RTC (Realtime Clock) module found on
+	  Toshiba TX4939 SoC.
+
+config RTC_DRV_MV
+	tristate "Marvell SoC RTC"
+	depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
+	help
+	  If you say yes here you will get support for the in-chip RTC
+	  that can be found in some of Marvell's SoC devices, such as
+	  the Kirkwood 88F6281 and 88F6192.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-mv.
+
+config RTC_DRV_ARMADA38X
+	tristate "Armada 38x Marvell SoC RTC"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	help
+	  If you say yes here you will get support for the in-chip RTC
+	  that can be found in the Armada 38x Marvell's SoC device
+
+	  This driver can also be built as a module. If so, the module
+	  will be called armada38x-rtc.
+
+config RTC_DRV_FTRTC010
+	tristate "Faraday Technology FTRTC010 RTC"
+	depends on HAS_IOMEM
+	default ARCH_GEMINI
+	help
+	  If you say Y here you will get support for the
+	  Faraday Technolog FTRTC010 found on e.g. Gemini SoC's.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ftrtc010.
+
+config RTC_DRV_PS3
+	tristate "PS3 RTC"
+	depends on PPC_PS3
+	help
+	  If you say yes here you will get support for the RTC on PS3.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ps3.
+
+config RTC_DRV_COH901331
+	tristate "ST-Ericsson COH 901 331 RTC"
+	depends on ARCH_U300 || COMPILE_TEST
+	help
+	  If you say Y here you will get access to ST-Ericsson
+	  COH 901 331 RTC clock found in some ST-Ericsson Mobile
+	  Platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-coh901331".
+
+
+config RTC_DRV_STMP
+	tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
+	depends on ARCH_MXS || COMPILE_TEST
+	select STMP_DEVICE
+	help
+	  If you say yes here you will get support for the onboard
+	  STMP3xxx/i.MX23/i.MX28 RTC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-stmp3xxx.
+
+config RTC_DRV_PCAP
+	tristate "PCAP RTC"
+	depends on EZX_PCAP
+	help
+	  If you say Y here you will get support for the RTC found on
+	  the PCAP2 ASIC used on some Motorola phones.
+
+config RTC_DRV_MC13XXX
+	depends on MFD_MC13XXX
+	tristate "Freescale MC13xxx RTC"
+	help
+	  This enables support for the RTCs found on Freescale's PMICs
+	  MC13783 and MC13892.
+
+config RTC_DRV_MPC5121
+	tristate "Freescale MPC5121 built-in RTC"
+	depends on PPC_MPC512x || PPC_MPC52xx
+	help
+	  If you say yes here you will get support for the
+	  built-in RTC on MPC5121 or on MPC5200.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-mpc5121.
+
+config RTC_DRV_JZ4740
+	tristate "Ingenic JZ4740 SoC"
+	depends on MACH_INGENIC || COMPILE_TEST
+	help
+	  If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
+	  controllers.
+
+	  This driver can also be buillt as a module. If so, the module
+	  will be called rtc-jz4740.
+
+config RTC_DRV_LPC24XX
+	tristate "NXP RTC for LPC178x/18xx/408x/43xx"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	help
+	  This enables support for the NXP RTC found which can be found on
+	  NXP LPC178x/18xx/408x/43xx devices.
+
+	  If you have one of the devices above enable this driver to use
+	  the hardware RTC. This driver can also be built as a module. If
+	  so, the module will be called rtc-lpc24xx.
+
+config RTC_DRV_LPC32XX
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	tristate "NXP LPC32XX RTC"
+	help
+	  This enables support for the NXP RTC in the LPC32XX
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-lpc32xx.
+
+config RTC_DRV_PM8XXX
+	tristate "Qualcomm PMIC8XXX RTC"
+	depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
+	help
+	  If you say yes here you get support for the
+	  Qualcomm PMIC8XXX RTC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pm8xxx.
+
+config RTC_DRV_TEGRA
+	tristate "NVIDIA Tegra Internal RTC driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	help
+	  If you say yes here you get support for the
+	  Tegra 200 series internal RTC module.
+
+	  This drive can also be built as a module. If so, the module
+	  will be called rtc-tegra.
+
+config RTC_DRV_TILE
+	tristate "Tilera hypervisor RTC support"
+	depends on TILE
+	help
+	  Enable support for the Linux driver side of the Tilera
+	  hypervisor's real-time clock interface.
+
+config RTC_DRV_PUV3
+	tristate "PKUnity v3 RTC support"
+	depends on ARCH_PUV3
+	help
+	  This enables support for the RTC in the PKUnity-v3 SoCs.
+
+	  This drive can also be built as a module. If so, the module
+	  will be called rtc-puv3.
+
+config RTC_DRV_LOONGSON1
+	tristate "loongson1 RTC support"
+	depends on MACH_LOONGSON32
+	help
+	  This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
+	  counter) to be used as a RTC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ls1x.
+
+config RTC_DRV_MXC
+	tristate "Freescale MXC Real Time Clock"
+	depends on ARCH_MXC
+	help
+	   If you say yes here you get support for the Freescale MXC
+	   RTC module.
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-mxc".
+
+config RTC_DRV_SNVS
+	tristate "Freescale SNVS RTC support"
+	select REGMAP_MMIO
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	   If you say yes here you get support for the Freescale SNVS
+	   Low Power (LP) RTC module.
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-snvs".
+
+config RTC_DRV_SIRFSOC
+	tristate "SiRFSOC RTC"
+	depends on ARCH_SIRF
+	help
+	  Say "yes" here to support the real time clock on SiRF SOC chips.
+	  This driver can also be built as a module called rtc-sirfsoc.
+
+config RTC_DRV_ST_LPC
+	tristate "STMicroelectronics LPC RTC"
+	depends on ARCH_STI
+	depends on OF
+	help
+	  Say Y here to include STMicroelectronics Low Power Controller
+	  (LPC) based RTC support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-st-lpc.
+
+config RTC_DRV_MOXART
+	tristate "MOXA ART RTC"
+	depends on ARCH_MOXART || COMPILE_TEST
+	help
+	   If you say yes here you get support for the MOXA ART
+	   RTC module.
+
+	   This driver can also be built as a module. If so, the module
+	   will be called rtc-moxart
+
+config RTC_DRV_MT6358
+	tristate "Mediatek Real Time Clock driver"
+	depends on MFD_MT6358 || (COMPILE_TEST && IRQ_DOMAIN)
+	help
+	  This selects the Mediatek(R) RTC driver. RTC is part of Mediatek
+	  MT6358 PMIC. You should enable MT6358 PMIC MFD before select
+	  Mediatek(R) RTC driver.
+
+	  If you want to use Mediatek(R) RTC interface, select Y or M here.
+
+config RTC_DRV_MT6397
+	tristate "Mediatek Real Time Clock driver"
+	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	help
+	  This selects the Mediatek(R) RTC driver. RTC is part of Mediatek
+	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
+	  Mediatek(R) RTC driver.
+
+	  If you want to use Mediatek(R) RTC interface, select Y or M here.
+
+config RTC_DRV_XGENE
+	tristate "APM X-Gene RTC"
+	depends on HAS_IOMEM
+	depends on ARCH_XGENE || COMPILE_TEST
+	help
+	  If you say yes here you get support for the APM X-Gene SoC real time
+	  clock.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-xgene".
+
+config RTC_DRV_PIC32
+	tristate "Microchip PIC32 RTC"
+	depends on MACH_PIC32
+	default y
+	help
+	   If you say yes here you get support for the PIC32 RTC module.
+
+	   This driver can also be built as a module. If so, the module
+	   will be called rtc-pic32
+
+config RTC_DRV_R7301
+	tristate "EPSON TOYOCOM RTC-7301SF/DG"
+	select REGMAP_MMIO
+	depends on OF && HAS_IOMEM
+	help
+	   If you say yes here you get support for the EPSON TOYOCOM
+	   RTC-7301SF/DG chips.
+
+	   This driver can also be built as a module. If so, the module
+	   will be called rtc-r7301.
+
+config RTC_DRV_STM32
+	tristate "STM32 RTC"
+	select REGMAP_MMIO
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	   If you say yes here you get support for the STM32 On-Chip
+	   Real Time Clock.
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-stm32".
+
+config RTC_DRV_CPCAP
+	depends on MFD_CPCAP
+	tristate "Motorola CPCAP RTC"
+	help
+	   Say y here for CPCAP rtc found on some Motorola phones
+	   and tablets such as Droid 4.
+
+config RTC_DRV_RTD119X
+	bool "Realtek RTD129x RTC"
+	depends on ARCH_REALTEK || COMPILE_TEST
+	default ARCH_REALTEK
+	help
+	  If you say yes here, you get support for the RTD1295 SoC
+	  Real Time Clock.
+
+comment "HID Sensor RTC drivers"
+
+config RTC_DRV_HID_SENSOR_TIME
+	tristate "HID Sensor Time"
+	depends on USB_HID
+	select IIO
+	select HID_SENSOR_HUB
+	select HID_SENSOR_IIO_COMMON
+	help
+	  Say yes here to build support for the HID Sensors of type Time.
+	  This drivers makes such sensors available as RTCs.
+
+	  If this driver is compiled as a module, it will be named
+	  rtc-hid-sensor-time.
+
+config RTC_DRV_GOLDFISH
+	tristate "Goldfish Real Time Clock"
+	depends on MIPS && (GOLDFISH || COMPILE_TEST)
+	help
+	  Say yes to enable RTC driver for the Goldfish based virtual platform.
+
+	  Goldfish is a code name for the virtual platform developed by Google
+	  for Android emulation.
+
+endif # RTC_CLASS
diff --git a/src/kernel/linux/v4.14/drivers/rtc/Makefile b/src/kernel/linux/v4.14/drivers/rtc/Makefile
new file mode 100644
index 0000000..70e51ee
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/Makefile
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for RTC class/drivers.
+#
+
+ccflags-$(CONFIG_RTC_DEBUG)	:= -DDEBUG
+
+obj-$(CONFIG_RTC_LIB)		+= rtc-lib.o
+obj-$(CONFIG_RTC_HCTOSYS)	+= hctosys.o
+obj-$(CONFIG_RTC_SYSTOHC)	+= systohc.o
+obj-$(CONFIG_RTC_CLASS)		+= rtc-core.o
+obj-$(CONFIG_RTC_MC146818_LIB)	+= rtc-mc146818-lib.o
+rtc-core-y			:= class.o interface.o
+
+ifdef CONFIG_RTC_DRV_EFI
+rtc-core-y			+= rtc-efi-platform.o
+endif
+
+rtc-core-$(CONFIG_RTC_NVMEM)		+= nvmem.o
+rtc-core-$(CONFIG_RTC_INTF_DEV)		+= rtc-dev.o
+rtc-core-$(CONFIG_RTC_INTF_PROC)	+= rtc-proc.o
+rtc-core-$(CONFIG_RTC_INTF_SYSFS)	+= rtc-sysfs.o
+
+# Keep the list ordered.
+
+obj-$(CONFIG_RTC_DRV_88PM80X)	+= rtc-88pm80x.o
+obj-$(CONFIG_RTC_DRV_88PM860X)	+= rtc-88pm860x.o
+obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
+obj-$(CONFIG_RTC_DRV_AB8500)	+= rtc-ab8500.o
+obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
+obj-$(CONFIG_RTC_DRV_AC100)	+= rtc-ac100.o
+obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
+obj-$(CONFIG_RTC_DRV_AS3722)	+= rtc-as3722.o
+obj-$(CONFIG_RTC_DRV_ASM9260)	+= rtc-asm9260.o
+obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
+obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
+obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
+obj-$(CONFIG_RTC_DRV_AU1XXX)	+= rtc-au1xxx.o
+obj-$(CONFIG_RTC_DRV_BFIN)	+= rtc-bfin.o
+obj-$(CONFIG_RTC_DRV_BRCMSTB)	+= rtc-brcmstb-waketimer.o
+obj-$(CONFIG_RTC_DRV_BQ32K)	+= rtc-bq32k.o
+obj-$(CONFIG_RTC_DRV_BQ4802)	+= rtc-bq4802.o
+obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
+obj-$(CONFIG_RTC_DRV_COH901331)	+= rtc-coh901331.o
+obj-$(CONFIG_RTC_DRV_CPCAP)	+= rtc-cpcap.o
+obj-$(CONFIG_RTC_DRV_DA9052)	+= rtc-da9052.o
+obj-$(CONFIG_RTC_DRV_DA9055)	+= rtc-da9055.o
+obj-$(CONFIG_RTC_DRV_DA9063)	+= rtc-da9063.o
+obj-$(CONFIG_RTC_DRV_DAVINCI)	+= rtc-davinci.o
+obj-$(CONFIG_RTC_DRV_DIGICOLOR)	+= rtc-digicolor.o
+obj-$(CONFIG_RTC_DRV_DM355EVM)	+= rtc-dm355evm.o
+obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
+obj-$(CONFIG_RTC_DRV_DS1286)	+= rtc-ds1286.o
+obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
+obj-$(CONFIG_RTC_DRV_DS1305)	+= rtc-ds1305.o
+obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
+obj-$(CONFIG_RTC_DRV_DS1343)	+= rtc-ds1343.o
+obj-$(CONFIG_RTC_DRV_DS1347)	+= rtc-ds1347.o
+obj-$(CONFIG_RTC_DRV_DS1374)	+= rtc-ds1374.o
+obj-$(CONFIG_RTC_DRV_DS1390)	+= rtc-ds1390.o
+obj-$(CONFIG_RTC_DRV_DS1511)	+= rtc-ds1511.o
+obj-$(CONFIG_RTC_DRV_DS1553)	+= rtc-ds1553.o
+obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
+obj-$(CONFIG_RTC_DRV_DS1685_FAMILY)	+= rtc-ds1685.o
+obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
+obj-$(CONFIG_RTC_DRV_DS2404)	+= rtc-ds2404.o
+obj-$(CONFIG_RTC_DRV_DS3232)	+= rtc-ds3232.o
+obj-$(CONFIG_RTC_DRV_EFI)	+= rtc-efi.o
+obj-$(CONFIG_RTC_DRV_EM3027)	+= rtc-em3027.o
+obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130)	+= rtc-fm3130.o
+obj-$(CONFIG_RTC_DRV_FTRTC010)	+= rtc-ftrtc010.o
+obj-$(CONFIG_RTC_DRV_GENERIC)	+= rtc-generic.o
+obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o
+obj-$(CONFIG_RTC_DRV_HYM8563)	+= rtc-hym8563.o
+obj-$(CONFIG_RTC_DRV_IMXDI)	+= rtc-imxdi.o
+obj-$(CONFIG_RTC_DRV_ISL12022)	+= rtc-isl12022.o
+obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
+obj-$(CONFIG_RTC_DRV_JZ4740)	+= rtc-jz4740.o
+obj-$(CONFIG_RTC_DRV_LP8788)	+= rtc-lp8788.o
+obj-$(CONFIG_RTC_DRV_LPC24XX)	+= rtc-lpc24xx.o
+obj-$(CONFIG_RTC_DRV_LPC32XX)	+= rtc-lpc32xx.o
+obj-$(CONFIG_RTC_DRV_LOONGSON1)	+= rtc-ls1x.o
+obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T93)	+= rtc-m41t93.o
+obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
+obj-$(CONFIG_RTC_DRV_M48T35)	+= rtc-m48t35.o
+obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
+obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
+obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
+obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
+obj-$(CONFIG_RTC_DRV_MAX6916)	+= rtc-max6916.o
+obj-$(CONFIG_RTC_DRV_MAX77686)	+= rtc-max77686.o
+obj-$(CONFIG_RTC_DRV_MAX8907)	+= rtc-max8907.o
+obj-$(CONFIG_RTC_DRV_MAX8925)	+= rtc-max8925.o
+obj-$(CONFIG_RTC_DRV_MAX8997)	+= rtc-max8997.o
+obj-$(CONFIG_RTC_DRV_MAX8998)	+= rtc-max8998.o
+obj-$(CONFIG_RTC_DRV_MC13XXX)	+= rtc-mc13xxx.o
+obj-$(CONFIG_RTC_DRV_MCP795)	+= rtc-mcp795.o
+obj-$(CONFIG_RTC_DRV_MOXART)	+= rtc-moxart.o
+obj-$(CONFIG_RTC_DRV_MPC5121)	+= rtc-mpc5121.o
+obj-$(CONFIG_RTC_DRV_VRTC)	+= rtc-mrst.o
+obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
+obj-$(CONFIG_RTC_DRV_MT6358)	+= rtc-mt6358.o
+obj-$(CONFIG_RTC_DRV_MT6397)	+= rtc-mt6397.o
+obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
+obj-$(CONFIG_RTC_DRV_MXC)	+= rtc-mxc.o
+obj-$(CONFIG_RTC_DRV_NUC900)	+= rtc-nuc900.o
+obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
+obj-$(CONFIG_RTC_DRV_OPAL)	+= rtc-opal.o
+obj-$(CONFIG_RTC_DRV_PALMAS)	+= rtc-palmas.o
+obj-$(CONFIG_RTC_DRV_PCAP)	+= rtc-pcap.o
+obj-$(CONFIG_RTC_DRV_PCF2123)	+= rtc-pcf2123.o
+obj-$(CONFIG_RTC_DRV_PCF2127)	+= rtc-pcf2127.o
+obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
+obj-$(CONFIG_RTC_DRV_PCF85063)	+= rtc-pcf85063.o
+obj-$(CONFIG_RTC_DRV_PCF8523)	+= rtc-pcf8523.o
+obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
+obj-$(CONFIG_RTC_DRV_PCF8583)	+= rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PIC32)	+= rtc-pic32.o
+obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
+obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
+obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
+obj-$(CONFIG_RTC_DRV_PUV3)	+= rtc-puv3.o
+obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
+obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
+obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
+obj-$(CONFIG_RTC_DRV_RC5T583)	+= rtc-rc5t583.o
+obj-$(CONFIG_RTC_DRV_RK808)	+= rtc-rk808.o
+obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c01.o
+obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_RTD119X)	+= rtc-rtd119x.o
+obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
+obj-$(CONFIG_RTC_DRV_RV8803)	+= rtc-rv8803.o
+obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
+obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o
+obj-$(CONFIG_RTC_DRV_RX8010)	+= rtc-rx8010.o
+obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
+obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o
+obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
+obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
+obj-$(CONFIG_RTC_DRV_SIRFSOC)	+= rtc-sirfsoc.o
+obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
+obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o
+obj-$(CONFIG_RTC_DRV_STARFIRE)	+= rtc-starfire.o
+obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
+obj-$(CONFIG_RTC_DRV_STM32) 	+= rtc-stm32.o
+obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
+obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
+obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
+obj-$(CONFIG_RTC_DRV_SUN6I)	+= rtc-sun6i.o
+obj-$(CONFIG_RTC_DRV_SUNXI)	+= rtc-sunxi.o
+obj-$(CONFIG_RTC_DRV_TEGRA)	+= rtc-tegra.o
+obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
+obj-$(CONFIG_RTC_DRV_TILE)	+= rtc-tile.o
+obj-$(CONFIG_RTC_DRV_TPS6586X)	+= rtc-tps6586x.o
+obj-$(CONFIG_RTC_DRV_TPS65910)	+= rtc-tps65910.o
+obj-$(CONFIG_RTC_DRV_TPS80031)	+= rtc-tps80031.o
+obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl.o
+obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
+obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
+obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_VT8500)	+= rtc-vt8500.o
+obj-$(CONFIG_RTC_DRV_WM831X)	+= rtc-wm831x.o
+obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
+obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_XGENE)	+= rtc-xgene.o
+obj-$(CONFIG_RTC_DRV_ZYNQMP)	+= rtc-zynqmp.o
+obj-$(CONFIG_RTC_DRV_GOLDFISH)	+= rtc-goldfish.o
diff --git a/src/kernel/linux/v4.14/drivers/rtc/class.c b/src/kernel/linux/v4.14/drivers/rtc/class.c
new file mode 100644
index 0000000..2ed970d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/class.c
@@ -0,0 +1,474 @@
+/*
+ * RTC subsystem, base class
+ *
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * class skeleton from drivers/hwmon/hwmon.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/rtc.h>
+#include <linux/kdev_t.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include "rtc-core.h"
+
+
+static DEFINE_IDA(rtc_ida);
+struct class *rtc_class;
+
+static void rtc_device_release(struct device *dev)
+{
+	struct rtc_device *rtc = to_rtc_device(dev);
+	ida_simple_remove(&rtc_ida, rtc->id);
+	kfree(rtc);
+}
+
+#ifdef CONFIG_RTC_HCTOSYS_DEVICE
+/* Result of the last RTC to system clock attempt. */
+int rtc_hctosys_ret = -ENODEV;
+#endif
+
+#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
+/*
+ * On suspend(), measure the delta between one RTC and the
+ * system's wall clock; restore it on resume().
+ */
+
+static struct timespec64 old_rtc, old_system, old_delta;
+
+
+static int rtc_suspend(struct device *dev)
+{
+	struct rtc_device	*rtc = to_rtc_device(dev);
+	struct rtc_time		tm;
+	struct timespec64	delta, delta_delta;
+	int err;
+
+	if (timekeeping_rtc_skipsuspend())
+		return 0;
+
+	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
+		return 0;
+
+	/* snapshot the current RTC and system time at suspend*/
+	err = rtc_read_time(rtc, &tm);
+	if (err < 0) {
+		pr_debug("%s:  fail to read rtc time\n", dev_name(&rtc->dev));
+		return 0;
+	}
+
+	getnstimeofday64(&old_system);
+	old_rtc.tv_sec = rtc_tm_to_time64(&tm);
+
+
+	/*
+	 * To avoid drift caused by repeated suspend/resumes,
+	 * which each can add ~1 second drift error,
+	 * try to compensate so the difference in system time
+	 * and rtc time stays close to constant.
+	 */
+	delta = timespec64_sub(old_system, old_rtc);
+	delta_delta = timespec64_sub(delta, old_delta);
+	if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) {
+		/*
+		 * if delta_delta is too large, assume time correction
+		 * has occured and set old_delta to the current delta.
+		 */
+		old_delta = delta;
+	} else {
+		/* Otherwise try to adjust old_system to compensate */
+		old_system = timespec64_sub(old_system, delta_delta);
+	}
+
+	return 0;
+}
+
+static int rtc_resume(struct device *dev)
+{
+	struct rtc_device	*rtc = to_rtc_device(dev);
+	struct rtc_time		tm;
+	struct timespec64	new_system, new_rtc;
+	struct timespec64	sleep_time;
+	int err;
+
+	if (timekeeping_rtc_skipresume())
+		return 0;
+
+	rtc_hctosys_ret = -ENODEV;
+	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
+		return 0;
+
+	/* snapshot the current rtc and system time at resume */
+	getnstimeofday64(&new_system);
+	err = rtc_read_time(rtc, &tm);
+	if (err < 0) {
+		pr_debug("%s:  fail to read rtc time\n", dev_name(&rtc->dev));
+		return 0;
+	}
+
+	new_rtc.tv_sec = rtc_tm_to_time64(&tm);
+	new_rtc.tv_nsec = 0;
+
+	if (new_rtc.tv_sec < old_rtc.tv_sec) {
+		pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
+		return 0;
+	}
+
+	/* calculate the RTC time delta (sleep time)*/
+	sleep_time = timespec64_sub(new_rtc, old_rtc);
+
+	/*
+	 * Since these RTC suspend/resume handlers are not called
+	 * at the very end of suspend or the start of resume,
+	 * some run-time may pass on either sides of the sleep time
+	 * so subtract kernel run-time between rtc_suspend to rtc_resume
+	 * to keep things accurate.
+	 */
+	sleep_time = timespec64_sub(sleep_time,
+			timespec64_sub(new_system, old_system));
+
+	if (sleep_time.tv_sec >= 0)
+		timekeeping_inject_sleeptime64(&sleep_time);
+	rtc_hctosys_ret = 0;
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rtc_class_dev_pm_ops, rtc_suspend, rtc_resume);
+#define RTC_CLASS_DEV_PM_OPS	(&rtc_class_dev_pm_ops)
+#else
+#define RTC_CLASS_DEV_PM_OPS	NULL
+#endif
+
+/* Ensure the caller will set the id before releasing the device */
+static struct rtc_device *rtc_allocate_device(void)
+{
+	struct rtc_device *rtc;
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return NULL;
+
+	device_initialize(&rtc->dev);
+
+	rtc->irq_freq = 1;
+	rtc->max_user_freq = 64;
+	rtc->dev.class = rtc_class;
+	rtc->dev.groups = rtc_get_dev_attribute_groups();
+	rtc->dev.release = rtc_device_release;
+
+	mutex_init(&rtc->ops_lock);
+	spin_lock_init(&rtc->irq_lock);
+	spin_lock_init(&rtc->irq_task_lock);
+	init_waitqueue_head(&rtc->irq_queue);
+
+	/* Init timerqueue */
+	timerqueue_init_head(&rtc->timerqueue);
+	INIT_WORK(&rtc->irqwork, rtc_timer_do_work);
+	/* Init aie timer */
+	rtc_timer_init(&rtc->aie_timer, rtc_aie_update_irq, (void *)rtc);
+	/* Init uie timer */
+	rtc_timer_init(&rtc->uie_rtctimer, rtc_uie_update_irq, (void *)rtc);
+	/* Init pie timer */
+	hrtimer_init(&rtc->pie_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	rtc->pie_timer.function = rtc_pie_update_irq;
+	rtc->pie_enabled = 0;
+
+	return rtc;
+}
+
+static int rtc_device_get_id(struct device *dev)
+{
+	int of_id = -1, id = -1;
+
+	if (dev->of_node)
+		of_id = of_alias_get_id(dev->of_node, "rtc");
+	else if (dev->parent && dev->parent->of_node)
+		of_id = of_alias_get_id(dev->parent->of_node, "rtc");
+
+	if (of_id >= 0) {
+		id = ida_simple_get(&rtc_ida, of_id, of_id + 1, GFP_KERNEL);
+		if (id < 0)
+			dev_warn(dev, "/aliases ID %d not available\n", of_id);
+	}
+
+	if (id < 0)
+		id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
+
+	return id;
+}
+
+/**
+ * rtc_device_register - register w/ RTC class
+ * @dev: the device to register
+ *
+ * rtc_device_unregister() must be called when the class device is no
+ * longer needed.
+ *
+ * Returns the pointer to the new struct class device.
+ */
+struct rtc_device *rtc_device_register(const char *name, struct device *dev,
+					const struct rtc_class_ops *ops,
+					struct module *owner)
+{
+	struct rtc_device *rtc;
+	struct rtc_wkalrm alrm;
+	int id, err;
+
+	id = rtc_device_get_id(dev);
+	if (id < 0) {
+		err = id;
+		goto exit;
+	}
+
+	rtc = rtc_allocate_device();
+	if (!rtc) {
+		err = -ENOMEM;
+		goto exit_ida;
+	}
+
+	rtc->id = id;
+	rtc->ops = ops;
+	rtc->owner = owner;
+	rtc->dev.parent = dev;
+
+	dev_set_name(&rtc->dev, "rtc%d", id);
+
+	/* Check to see if there is an ALARM already set in hw */
+	err = __rtc_read_alarm(rtc, &alrm);
+
+	if (!err && !rtc_valid_tm(&alrm.time))
+		rtc_initialize_alarm(rtc, &alrm);
+
+	rtc_dev_prepare(rtc);
+
+	err = cdev_device_add(&rtc->char_dev, &rtc->dev);
+	if (err) {
+		dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n",
+			 name, MAJOR(rtc->dev.devt), rtc->id);
+
+		/* This will free both memory and the ID */
+		put_device(&rtc->dev);
+		goto exit;
+	} else {
+		dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", name,
+			MAJOR(rtc->dev.devt), rtc->id);
+	}
+
+	rtc_proc_add_device(rtc);
+
+	dev_info(dev, "rtc core: registered %s as %s\n",
+			name, dev_name(&rtc->dev));
+
+	return rtc;
+
+exit_ida:
+	ida_simple_remove(&rtc_ida, id);
+
+exit:
+	dev_err(dev, "rtc core: unable to register %s, err = %d\n",
+			name, err);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(rtc_device_register);
+
+
+/**
+ * rtc_device_unregister - removes the previously registered RTC class device
+ *
+ * @rtc: the RTC class device to destroy
+ */
+void rtc_device_unregister(struct rtc_device *rtc)
+{
+	rtc_nvmem_unregister(rtc);
+
+	mutex_lock(&rtc->ops_lock);
+	/*
+	 * Remove innards of this RTC, then disable it, before
+	 * letting any rtc_class_open() users access it again
+	 */
+	rtc_proc_del_device(rtc);
+	cdev_device_del(&rtc->char_dev, &rtc->dev);
+	rtc->ops = NULL;
+	mutex_unlock(&rtc->ops_lock);
+	put_device(&rtc->dev);
+}
+EXPORT_SYMBOL_GPL(rtc_device_unregister);
+
+static void devm_rtc_device_release(struct device *dev, void *res)
+{
+	struct rtc_device *rtc = *(struct rtc_device **)res;
+
+	rtc_device_unregister(rtc);
+}
+
+static int devm_rtc_device_match(struct device *dev, void *res, void *data)
+{
+	struct rtc **r = res;
+
+	return *r == data;
+}
+
+/**
+ * devm_rtc_device_register - resource managed rtc_device_register()
+ * @dev: the device to register
+ * @name: the name of the device
+ * @ops: the rtc operations structure
+ * @owner: the module owner
+ *
+ * @return a struct rtc on success, or an ERR_PTR on error
+ *
+ * Managed rtc_device_register(). The rtc_device returned from this function
+ * are automatically freed on driver detach. See rtc_device_register()
+ * for more information.
+ */
+
+struct rtc_device *devm_rtc_device_register(struct device *dev,
+					const char *name,
+					const struct rtc_class_ops *ops,
+					struct module *owner)
+{
+	struct rtc_device **ptr, *rtc;
+
+	ptr = devres_alloc(devm_rtc_device_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	rtc = rtc_device_register(name, dev, ops, owner);
+	if (!IS_ERR(rtc)) {
+		*ptr = rtc;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return rtc;
+}
+EXPORT_SYMBOL_GPL(devm_rtc_device_register);
+
+/**
+ * devm_rtc_device_unregister - resource managed devm_rtc_device_unregister()
+ * @dev: the device to unregister
+ * @rtc: the RTC class device to unregister
+ *
+ * Deallocated a rtc allocated with devm_rtc_device_register(). Normally this
+ * function will not need to be called and the resource management code will
+ * ensure that the resource is freed.
+ */
+void devm_rtc_device_unregister(struct device *dev, struct rtc_device *rtc)
+{
+	int rc;
+
+	rc = devres_release(dev, devm_rtc_device_release,
+				devm_rtc_device_match, rtc);
+	WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_rtc_device_unregister);
+
+static void devm_rtc_release_device(struct device *dev, void *res)
+{
+	struct rtc_device *rtc = *(struct rtc_device **)res;
+
+	if (rtc->registered)
+		rtc_device_unregister(rtc);
+	else
+		put_device(&rtc->dev);
+}
+
+struct rtc_device *devm_rtc_allocate_device(struct device *dev)
+{
+	struct rtc_device **ptr, *rtc;
+	int id, err;
+
+	id = rtc_device_get_id(dev);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	ptr = devres_alloc(devm_rtc_release_device, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr) {
+		err = -ENOMEM;
+		goto exit_ida;
+	}
+
+	rtc = rtc_allocate_device();
+	if (!rtc) {
+		err = -ENOMEM;
+		goto exit_devres;
+	}
+
+	*ptr = rtc;
+	devres_add(dev, ptr);
+
+	rtc->id = id;
+	rtc->dev.parent = dev;
+	dev_set_name(&rtc->dev, "rtc%d", id);
+
+	return rtc;
+
+exit_devres:
+	devres_free(ptr);
+exit_ida:
+	ida_simple_remove(&rtc_ida, id);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(devm_rtc_allocate_device);
+
+int __rtc_register_device(struct module *owner, struct rtc_device *rtc)
+{
+	struct rtc_wkalrm alrm;
+	int err;
+
+	if (!rtc->ops)
+		return -EINVAL;
+
+	rtc->owner = owner;
+
+	/* Check to see if there is an ALARM already set in hw */
+	err = __rtc_read_alarm(rtc, &alrm);
+	if (!err && !rtc_valid_tm(&alrm.time))
+		rtc_initialize_alarm(rtc, &alrm);
+
+	rtc_dev_prepare(rtc);
+
+	err = cdev_device_add(&rtc->char_dev, &rtc->dev);
+	if (err)
+		dev_warn(rtc->dev.parent, "failed to add char device %d:%d\n",
+			 MAJOR(rtc->dev.devt), rtc->id);
+	else
+		dev_dbg(rtc->dev.parent, "char device (%d:%d)\n",
+			MAJOR(rtc->dev.devt), rtc->id);
+
+	rtc_proc_add_device(rtc);
+
+	rtc_nvmem_register(rtc);
+
+	rtc->registered = true;
+	dev_info(rtc->dev.parent, "registered as %s\n",
+		 dev_name(&rtc->dev));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__rtc_register_device);
+
+static int __init rtc_init(void)
+{
+	rtc_class = class_create(THIS_MODULE, "rtc");
+	if (IS_ERR(rtc_class)) {
+		pr_err("couldn't create class\n");
+		return PTR_ERR(rtc_class);
+	}
+	rtc_class->pm = RTC_CLASS_DEV_PM_OPS;
+	rtc_dev_init();
+	return 0;
+}
+subsys_initcall(rtc_init);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/hctosys.c b/src/kernel/linux/v4.14/drivers/rtc/hctosys.c
new file mode 100644
index 0000000..b9ec4a1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/hctosys.c
@@ -0,0 +1,77 @@
+/*
+ * RTC subsystem, initialize system time on startup
+ *
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/rtc.h>
+
+/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+ * whether it stores the most close value or the value with partial
+ * seconds truncated. However, it is important that we use it to store
+ * the truncated value. This is because otherwise it is necessary,
+ * in an rtc sync function, to read both xtime.tv_sec and
+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+ * of >32bits is not possible. So storing the most close value would
+ * slow down the sync API. So here we have the truncated value and
+ * the best guess is to add 0.5s.
+ */
+
+static int __init rtc_hctosys(void)
+{
+	int err = -ENODEV;
+	struct rtc_time tm;
+	struct timespec64 tv64 = {
+		.tv_nsec = NSEC_PER_SEC >> 1,
+	};
+	struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+
+	if (rtc == NULL) {
+		pr_info("unable to open rtc device (%s)\n",
+			CONFIG_RTC_HCTOSYS_DEVICE);
+		goto err_open;
+	}
+
+	err = rtc_read_time(rtc, &tm);
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: unable to read the hardware clock\n");
+		goto err_read;
+
+	}
+
+	tv64.tv_sec = rtc_tm_to_time64(&tm);
+
+#if BITS_PER_LONG == 32
+	if (tv64.tv_sec > INT_MAX) {
+		err = -ERANGE;
+		goto err_read;
+	}
+#endif
+
+	err = do_settimeofday64(&tv64);
+
+	dev_info(rtc->dev.parent,
+		"setting system clock to "
+		"%d-%02d-%02d %02d:%02d:%02d UTC (%lld)\n",
+		tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec,
+		(long long) tv64.tv_sec);
+
+err_read:
+	rtc_class_close(rtc);
+
+err_open:
+	rtc_hctosys_ret = err;
+
+	return err;
+}
+
+late_initcall(rtc_hctosys);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/interface.c b/src/kernel/linux/v4.14/drivers/rtc/interface.c
new file mode 100644
index 0000000..e4f951e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/interface.c
@@ -0,0 +1,1030 @@
+/*
+ * RTC subsystem, interface functions
+ *
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on arch/arm/common/rtctime.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/rtc.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/log2.h>
+#include <linux/workqueue.h>
+
+static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer);
+static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer);
+
+static int __rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
+{
+	int err;
+	if (!rtc->ops)
+		err = -ENODEV;
+	else if (!rtc->ops->read_time)
+		err = -EINVAL;
+	else {
+		memset(tm, 0, sizeof(struct rtc_time));
+		err = rtc->ops->read_time(rtc->dev.parent, tm);
+		if (err < 0) {
+			dev_dbg(&rtc->dev, "read_time: fail to read: %d\n",
+				err);
+			return err;
+		}
+
+		err = rtc_valid_tm(tm);
+		if (err < 0)
+			dev_dbg(&rtc->dev, "read_time: rtc_time isn't valid\n");
+	}
+	return err;
+}
+
+int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	err = __rtc_read_time(rtc, tm);
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_read_time);
+
+int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
+{
+	int err;
+
+	err = rtc_valid_tm(tm);
+	if (err != 0)
+		return err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	if (!rtc->ops)
+		err = -ENODEV;
+	else if (rtc->ops->set_time)
+		err = rtc->ops->set_time(rtc->dev.parent, tm);
+	else if (rtc->ops->set_mmss64) {
+		time64_t secs64 = rtc_tm_to_time64(tm);
+
+		err = rtc->ops->set_mmss64(rtc->dev.parent, secs64);
+	} else if (rtc->ops->set_mmss) {
+		time64_t secs64 = rtc_tm_to_time64(tm);
+		err = rtc->ops->set_mmss(rtc->dev.parent, secs64);
+	} else
+		err = -EINVAL;
+
+	pm_stay_awake(rtc->dev.parent);
+	mutex_unlock(&rtc->ops_lock);
+	/* A timer might have just expired */
+	schedule_work(&rtc->irqwork);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_set_time);
+
+static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	if (rtc->ops == NULL)
+		err = -ENODEV;
+	else if (!rtc->ops->read_alarm)
+		err = -EINVAL;
+	else {
+		alarm->enabled = 0;
+		alarm->pending = 0;
+		alarm->time.tm_sec = -1;
+		alarm->time.tm_min = -1;
+		alarm->time.tm_hour = -1;
+		alarm->time.tm_mday = -1;
+		alarm->time.tm_mon = -1;
+		alarm->time.tm_year = -1;
+		alarm->time.tm_wday = -1;
+		alarm->time.tm_yday = -1;
+		alarm->time.tm_isdst = -1;
+		err = rtc->ops->read_alarm(rtc->dev.parent, alarm);
+	}
+
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+
+int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+	struct rtc_time before, now;
+	int first_time = 1;
+	time64_t t_now, t_alm;
+	enum { none, day, month, year } missing = none;
+	unsigned days;
+
+	/* The lower level RTC driver may return -1 in some fields,
+	 * creating invalid alarm->time values, for reasons like:
+	 *
+	 *   - The hardware may not be capable of filling them in;
+	 *     many alarms match only on time-of-day fields, not
+	 *     day/month/year calendar data.
+	 *
+	 *   - Some hardware uses illegal values as "wildcard" match
+	 *     values, which non-Linux firmware (like a BIOS) may try
+	 *     to set up as e.g. "alarm 15 minutes after each hour".
+	 *     Linux uses only oneshot alarms.
+	 *
+	 * When we see that here, we deal with it by using values from
+	 * a current RTC timestamp for any missing (-1) values.  The
+	 * RTC driver prevents "periodic alarm" modes.
+	 *
+	 * But this can be racey, because some fields of the RTC timestamp
+	 * may have wrapped in the interval since we read the RTC alarm,
+	 * which would lead to us inserting inconsistent values in place
+	 * of the -1 fields.
+	 *
+	 * Reading the alarm and timestamp in the reverse sequence
+	 * would have the same race condition, and not solve the issue.
+	 *
+	 * So, we must first read the RTC timestamp,
+	 * then read the RTC alarm value,
+	 * and then read a second RTC timestamp.
+	 *
+	 * If any fields of the second timestamp have changed
+	 * when compared with the first timestamp, then we know
+	 * our timestamp may be inconsistent with that used by
+	 * the low-level rtc_read_alarm_internal() function.
+	 *
+	 * So, when the two timestamps disagree, we just loop and do
+	 * the process again to get a fully consistent set of values.
+	 *
+	 * This could all instead be done in the lower level driver,
+	 * but since more than one lower level RTC implementation needs it,
+	 * then it's probably best best to do it here instead of there..
+	 */
+
+	/* Get the "before" timestamp */
+	err = rtc_read_time(rtc, &before);
+	if (err < 0)
+		return err;
+	do {
+		if (!first_time)
+			memcpy(&before, &now, sizeof(struct rtc_time));
+		first_time = 0;
+
+		/* get the RTC alarm values, which may be incomplete */
+		err = rtc_read_alarm_internal(rtc, alarm);
+		if (err)
+			return err;
+
+		/* full-function RTCs won't have such missing fields */
+		if (rtc_valid_tm(&alarm->time) == 0)
+			return 0;
+
+		/* get the "after" timestamp, to detect wrapped fields */
+		err = rtc_read_time(rtc, &now);
+		if (err < 0)
+			return err;
+
+		/* note that tm_sec is a "don't care" value here: */
+	} while (   before.tm_min   != now.tm_min
+		 || before.tm_hour  != now.tm_hour
+		 || before.tm_mon   != now.tm_mon
+		 || before.tm_year  != now.tm_year);
+
+	/* Fill in the missing alarm fields using the timestamp; we
+	 * know there's at least one since alarm->time is invalid.
+	 */
+	if (alarm->time.tm_sec == -1)
+		alarm->time.tm_sec = now.tm_sec;
+	if (alarm->time.tm_min == -1)
+		alarm->time.tm_min = now.tm_min;
+	if (alarm->time.tm_hour == -1)
+		alarm->time.tm_hour = now.tm_hour;
+
+	/* For simplicity, only support date rollover for now */
+	if (alarm->time.tm_mday < 1 || alarm->time.tm_mday > 31) {
+		alarm->time.tm_mday = now.tm_mday;
+		missing = day;
+	}
+	if ((unsigned)alarm->time.tm_mon >= 12) {
+		alarm->time.tm_mon = now.tm_mon;
+		if (missing == none)
+			missing = month;
+	}
+	if (alarm->time.tm_year == -1) {
+		alarm->time.tm_year = now.tm_year;
+		if (missing == none)
+			missing = year;
+	}
+
+	/* Can't proceed if alarm is still invalid after replacing
+	 * missing fields.
+	 */
+	err = rtc_valid_tm(&alarm->time);
+	if (err)
+		goto done;
+
+	/* with luck, no rollover is needed */
+	t_now = rtc_tm_to_time64(&now);
+	t_alm = rtc_tm_to_time64(&alarm->time);
+	if (t_now < t_alm)
+		goto done;
+
+	switch (missing) {
+
+	/* 24 hour rollover ... if it's now 10am Monday, an alarm that
+	 * that will trigger at 5am will do so at 5am Tuesday, which
+	 * could also be in the next month or year.  This is a common
+	 * case, especially for PCs.
+	 */
+	case day:
+		dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
+		t_alm += 24 * 60 * 60;
+		rtc_time64_to_tm(t_alm, &alarm->time);
+		break;
+
+	/* Month rollover ... if it's the 31th, an alarm on the 3rd will
+	 * be next month.  An alarm matching on the 30th, 29th, or 28th
+	 * may end up in the month after that!  Many newer PCs support
+	 * this type of alarm.
+	 */
+	case month:
+		dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month");
+		do {
+			if (alarm->time.tm_mon < 11)
+				alarm->time.tm_mon++;
+			else {
+				alarm->time.tm_mon = 0;
+				alarm->time.tm_year++;
+			}
+			days = rtc_month_days(alarm->time.tm_mon,
+					alarm->time.tm_year);
+		} while (days < alarm->time.tm_mday);
+		break;
+
+	/* Year rollover ... easy except for leap years! */
+	case year:
+		dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
+		do {
+			alarm->time.tm_year++;
+		} while (!is_leap_year(alarm->time.tm_year + 1900)
+			&& rtc_valid_tm(&alarm->time) != 0);
+		break;
+
+	default:
+		dev_warn(&rtc->dev, "alarm rollover not handled\n");
+	}
+
+	err = rtc_valid_tm(&alarm->time);
+
+done:
+	if (err) {
+		dev_warn(&rtc->dev, "invalid alarm value: %d-%d-%d %d:%d:%d\n",
+			alarm->time.tm_year + 1900, alarm->time.tm_mon + 1,
+			alarm->time.tm_mday, alarm->time.tm_hour, alarm->time.tm_min,
+			alarm->time.tm_sec);
+	}
+
+	return err;
+}
+
+int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+	if (rtc->ops == NULL)
+		err = -ENODEV;
+	else if (!rtc->ops->read_alarm)
+		err = -EINVAL;
+	else {
+		memset(alarm, 0, sizeof(struct rtc_wkalrm));
+		alarm->enabled = rtc->aie_timer.enabled;
+		alarm->time = rtc_ktime_to_tm(rtc->aie_timer.node.expires);
+	}
+	mutex_unlock(&rtc->ops_lock);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_read_alarm);
+
+static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time tm;
+	time64_t now, scheduled;
+	int err;
+
+	err = rtc_valid_tm(&alarm->time);
+	if (err)
+		return err;
+	scheduled = rtc_tm_to_time64(&alarm->time);
+
+	/* Make sure we're not setting alarms in the past */
+	err = __rtc_read_time(rtc, &tm);
+	if (err)
+		return err;
+	now = rtc_tm_to_time64(&tm);
+	if (scheduled <= now)
+		return -ETIME;
+	/*
+	 * XXX - We just checked to make sure the alarm time is not
+	 * in the past, but there is still a race window where if
+	 * the is alarm set for the next second and the second ticks
+	 * over right here, before we set the alarm.
+	 */
+
+	if (!rtc->ops)
+		err = -ENODEV;
+	else if (!rtc->ops->set_alarm)
+		err = -EINVAL;
+	else
+		err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
+
+	return err;
+}
+
+int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+
+	if (!rtc->ops)
+		return -ENODEV;
+	else if (!rtc->ops->set_alarm)
+		return -EINVAL;
+
+	err = rtc_valid_tm(&alarm->time);
+	if (err != 0)
+		return err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+	if (rtc->aie_timer.enabled)
+		rtc_timer_remove(rtc, &rtc->aie_timer);
+
+	rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time);
+	rtc->aie_timer.period = 0;
+	if (alarm->enabled)
+		err = rtc_timer_enqueue(rtc, &rtc->aie_timer);
+
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_set_alarm);
+
+/* Called once per device from rtc_device_register */
+int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+	struct rtc_time now;
+
+	err = rtc_valid_tm(&alarm->time);
+	if (err != 0)
+		return err;
+
+	err = rtc_read_time(rtc, &now);
+	if (err)
+		return err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time);
+	rtc->aie_timer.period = 0;
+
+	/* Alarm has to be enabled & in the future for us to enqueue it */
+	if (alarm->enabled && (rtc_tm_to_ktime(now) <
+			 rtc->aie_timer.node.expires)) {
+
+		rtc->aie_timer.enabled = 1;
+		timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
+	}
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
+
+int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled)
+{
+	int err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	if (rtc->aie_timer.enabled != enabled) {
+		if (enabled)
+			err = rtc_timer_enqueue(rtc, &rtc->aie_timer);
+		else
+			rtc_timer_remove(rtc, &rtc->aie_timer);
+	}
+
+	if (err)
+		/* nothing */;
+	else if (!rtc->ops)
+		err = -ENODEV;
+	else if (!rtc->ops->alarm_irq_enable)
+		err = -EINVAL;
+	else
+		err = rtc->ops->alarm_irq_enable(rtc->dev.parent, enabled);
+
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_alarm_irq_enable);
+
+int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled)
+{
+	int err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	if (enabled == 0 && rtc->uie_irq_active) {
+		mutex_unlock(&rtc->ops_lock);
+		return rtc_dev_update_irq_enable_emul(rtc, 0);
+	}
+#endif
+	/* make sure we're changing state */
+	if (rtc->uie_rtctimer.enabled == enabled)
+		goto out;
+
+	if (rtc->uie_unsupported) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (enabled) {
+		struct rtc_time tm;
+		ktime_t now, onesec;
+
+		__rtc_read_time(rtc, &tm);
+		onesec = ktime_set(1, 0);
+		now = rtc_tm_to_ktime(tm);
+		rtc->uie_rtctimer.node.expires = ktime_add(now, onesec);
+		rtc->uie_rtctimer.period = ktime_set(1, 0);
+		err = rtc_timer_enqueue(rtc, &rtc->uie_rtctimer);
+	} else
+		rtc_timer_remove(rtc, &rtc->uie_rtctimer);
+
+out:
+	mutex_unlock(&rtc->ops_lock);
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	/*
+	 * Enable emulation if the driver did not provide
+	 * the update_irq_enable function pointer or if returned
+	 * -EINVAL to signal that it has been configured without
+	 * interrupts or that are not available at the moment.
+	 */
+	if (err == -EINVAL)
+		err = rtc_dev_update_irq_enable_emul(rtc, enabled);
+#endif
+	return err;
+
+}
+EXPORT_SYMBOL_GPL(rtc_update_irq_enable);
+
+
+/**
+ * rtc_handle_legacy_irq - AIE, UIE and PIE event hook
+ * @rtc: pointer to the rtc device
+ *
+ * This function is called when an AIE, UIE or PIE mode interrupt
+ * has occurred (or been emulated).
+ *
+ * Triggers the registered irq_task function callback.
+ */
+void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode)
+{
+	unsigned long flags;
+
+	/* mark one irq of the appropriate mode */
+	spin_lock_irqsave(&rtc->irq_lock, flags);
+	rtc->irq_data = (rtc->irq_data + (num << 8)) | (RTC_IRQF|mode);
+	spin_unlock_irqrestore(&rtc->irq_lock, flags);
+
+	/* call the task func */
+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
+	if (rtc->irq_task)
+		rtc->irq_task->func(rtc->irq_task->private_data);
+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
+
+	wake_up_interruptible(&rtc->irq_queue);
+	kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
+}
+
+
+/**
+ * rtc_aie_update_irq - AIE mode rtctimer hook
+ * @private: pointer to the rtc_device
+ *
+ * This functions is called when the aie_timer expires.
+ */
+void rtc_aie_update_irq(void *private)
+{
+	struct rtc_device *rtc = (struct rtc_device *)private;
+	rtc_handle_legacy_irq(rtc, 1, RTC_AF);
+}
+
+
+/**
+ * rtc_uie_update_irq - UIE mode rtctimer hook
+ * @private: pointer to the rtc_device
+ *
+ * This functions is called when the uie_timer expires.
+ */
+void rtc_uie_update_irq(void *private)
+{
+	struct rtc_device *rtc = (struct rtc_device *)private;
+	rtc_handle_legacy_irq(rtc, 1,  RTC_UF);
+}
+
+
+/**
+ * rtc_pie_update_irq - PIE mode hrtimer hook
+ * @timer: pointer to the pie mode hrtimer
+ *
+ * This function is used to emulate PIE mode interrupts
+ * using an hrtimer. This function is called when the periodic
+ * hrtimer expires.
+ */
+enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer)
+{
+	struct rtc_device *rtc;
+	ktime_t period;
+	int count;
+	rtc = container_of(timer, struct rtc_device, pie_timer);
+
+	period = NSEC_PER_SEC / rtc->irq_freq;
+	count = hrtimer_forward_now(timer, period);
+
+	rtc_handle_legacy_irq(rtc, count, RTC_PF);
+
+	return HRTIMER_RESTART;
+}
+
+/**
+ * rtc_update_irq - Triggered when a RTC interrupt occurs.
+ * @rtc: the rtc device
+ * @num: how many irqs are being reported (usually one)
+ * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF
+ * Context: any
+ */
+void rtc_update_irq(struct rtc_device *rtc,
+		unsigned long num, unsigned long events)
+{
+	if (IS_ERR_OR_NULL(rtc))
+		return;
+
+	pm_stay_awake(rtc->dev.parent);
+	schedule_work(&rtc->irqwork);
+}
+EXPORT_SYMBOL_GPL(rtc_update_irq);
+
+static int __rtc_match(struct device *dev, const void *data)
+{
+	const char *name = data;
+
+	if (strcmp(dev_name(dev), name) == 0)
+		return 1;
+	return 0;
+}
+
+struct rtc_device *rtc_class_open(const char *name)
+{
+	struct device *dev;
+	struct rtc_device *rtc = NULL;
+
+	dev = class_find_device(rtc_class, NULL, name, __rtc_match);
+	if (dev)
+		rtc = to_rtc_device(dev);
+
+	if (rtc) {
+		if (!try_module_get(rtc->owner)) {
+			put_device(dev);
+			rtc = NULL;
+		}
+	}
+
+	return rtc;
+}
+EXPORT_SYMBOL_GPL(rtc_class_open);
+
+void rtc_class_close(struct rtc_device *rtc)
+{
+	module_put(rtc->owner);
+	put_device(&rtc->dev);
+}
+EXPORT_SYMBOL_GPL(rtc_class_close);
+
+int rtc_irq_register(struct rtc_device *rtc, struct rtc_task *task)
+{
+	int retval = -EBUSY;
+
+	if (task == NULL || task->func == NULL)
+		return -EINVAL;
+
+	/* Cannot register while the char dev is in use */
+	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+		return -EBUSY;
+
+	spin_lock_irq(&rtc->irq_task_lock);
+	if (rtc->irq_task == NULL) {
+		rtc->irq_task = task;
+		retval = 0;
+	}
+	spin_unlock_irq(&rtc->irq_task_lock);
+
+	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rtc_irq_register);
+
+void rtc_irq_unregister(struct rtc_device *rtc, struct rtc_task *task)
+{
+	spin_lock_irq(&rtc->irq_task_lock);
+	if (rtc->irq_task == task)
+		rtc->irq_task = NULL;
+	spin_unlock_irq(&rtc->irq_task_lock);
+}
+EXPORT_SYMBOL_GPL(rtc_irq_unregister);
+
+static int rtc_update_hrtimer(struct rtc_device *rtc, int enabled)
+{
+	/*
+	 * We always cancel the timer here first, because otherwise
+	 * we could run into BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
+	 * when we manage to start the timer before the callback
+	 * returns HRTIMER_RESTART.
+	 *
+	 * We cannot use hrtimer_cancel() here as a running callback
+	 * could be blocked on rtc->irq_task_lock and hrtimer_cancel()
+	 * would spin forever.
+	 */
+	if (hrtimer_try_to_cancel(&rtc->pie_timer) < 0)
+		return -1;
+
+	if (enabled) {
+		ktime_t period = NSEC_PER_SEC / rtc->irq_freq;
+
+		hrtimer_start(&rtc->pie_timer, period, HRTIMER_MODE_REL);
+	}
+	return 0;
+}
+
+/**
+ * rtc_irq_set_state - enable/disable 2^N Hz periodic IRQs
+ * @rtc: the rtc device
+ * @task: currently registered with rtc_irq_register()
+ * @enabled: true to enable periodic IRQs
+ * Context: any
+ *
+ * Note that rtc_irq_set_freq() should previously have been used to
+ * specify the desired frequency of periodic IRQ task->func() callbacks.
+ */
+int rtc_irq_set_state(struct rtc_device *rtc, struct rtc_task *task, int enabled)
+{
+	int err = 0;
+	unsigned long flags;
+
+retry:
+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
+	if (rtc->irq_task != NULL && task == NULL)
+		err = -EBUSY;
+	else if (rtc->irq_task != task)
+		err = -EACCES;
+	else {
+		if (rtc_update_hrtimer(rtc, enabled) < 0) {
+			spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
+			cpu_relax();
+			goto retry;
+		}
+		rtc->pie_enabled = enabled;
+	}
+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_irq_set_state);
+
+/**
+ * rtc_irq_set_freq - set 2^N Hz periodic IRQ frequency for IRQ
+ * @rtc: the rtc device
+ * @task: currently registered with rtc_irq_register()
+ * @freq: positive frequency with which task->func() will be called
+ * Context: any
+ *
+ * Note that rtc_irq_set_state() is used to enable or disable the
+ * periodic IRQs.
+ */
+int rtc_irq_set_freq(struct rtc_device *rtc, struct rtc_task *task, int freq)
+{
+	int err = 0;
+	unsigned long flags;
+
+	if (freq <= 0 || freq > RTC_MAX_FREQ)
+		return -EINVAL;
+retry:
+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
+	if (rtc->irq_task != NULL && task == NULL)
+		err = -EBUSY;
+	else if (rtc->irq_task != task)
+		err = -EACCES;
+	else {
+		rtc->irq_freq = freq;
+		if (rtc->pie_enabled && rtc_update_hrtimer(rtc, 1) < 0) {
+			spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
+			cpu_relax();
+			goto retry;
+		}
+	}
+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_irq_set_freq);
+
+/**
+ * rtc_timer_enqueue - Adds a rtc_timer to the rtc_device timerqueue
+ * @rtc rtc device
+ * @timer timer being added.
+ *
+ * Enqueues a timer onto the rtc devices timerqueue and sets
+ * the next alarm event appropriately.
+ *
+ * Sets the enabled bit on the added timer.
+ *
+ * Must hold ops_lock for proper serialization of timerqueue
+ */
+static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
+{
+	struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
+	struct rtc_time tm;
+	ktime_t now;
+
+	timer->enabled = 1;
+	__rtc_read_time(rtc, &tm);
+	now = rtc_tm_to_ktime(tm);
+
+	/* Skip over expired timers */
+	while (next) {
+		if (next->expires >= now)
+			break;
+		next = timerqueue_iterate_next(next);
+	}
+
+	timerqueue_add(&rtc->timerqueue, &timer->node);
+	if (!next || ktime_before(timer->node.expires, next->expires)) {
+		struct rtc_wkalrm alarm;
+		int err;
+		alarm.time = rtc_ktime_to_tm(timer->node.expires);
+		alarm.enabled = 1;
+		err = __rtc_set_alarm(rtc, &alarm);
+		if (err == -ETIME) {
+			pm_stay_awake(rtc->dev.parent);
+			schedule_work(&rtc->irqwork);
+		} else if (err) {
+			timerqueue_del(&rtc->timerqueue, &timer->node);
+			timer->enabled = 0;
+			return err;
+		}
+	}
+	return 0;
+}
+
+static void rtc_alarm_disable(struct rtc_device *rtc)
+{
+	if (!rtc->ops || !rtc->ops->alarm_irq_enable)
+		return;
+
+	rtc->ops->alarm_irq_enable(rtc->dev.parent, false);
+}
+
+/**
+ * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
+ * @rtc rtc device
+ * @timer timer being removed.
+ *
+ * Removes a timer onto the rtc devices timerqueue and sets
+ * the next alarm event appropriately.
+ *
+ * Clears the enabled bit on the removed timer.
+ *
+ * Must hold ops_lock for proper serialization of timerqueue
+ */
+static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer)
+{
+	struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
+	timerqueue_del(&rtc->timerqueue, &timer->node);
+	timer->enabled = 0;
+	if (next == &timer->node) {
+		struct rtc_wkalrm alarm;
+		int err;
+		next = timerqueue_getnext(&rtc->timerqueue);
+		if (!next) {
+			rtc_alarm_disable(rtc);
+			return;
+		}
+		alarm.time = rtc_ktime_to_tm(next->expires);
+		alarm.enabled = 1;
+		err = __rtc_set_alarm(rtc, &alarm);
+		if (err == -ETIME) {
+			pm_stay_awake(rtc->dev.parent);
+			schedule_work(&rtc->irqwork);
+		}
+	}
+}
+
+/**
+ * rtc_timer_do_work - Expires rtc timers
+ * @rtc rtc device
+ * @timer timer being removed.
+ *
+ * Expires rtc timers. Reprograms next alarm event if needed.
+ * Called via worktask.
+ *
+ * Serializes access to timerqueue via ops_lock mutex
+ */
+void rtc_timer_do_work(struct work_struct *work)
+{
+	struct rtc_timer *timer;
+	struct timerqueue_node *next;
+	ktime_t now;
+	struct rtc_time tm;
+
+	struct rtc_device *rtc =
+		container_of(work, struct rtc_device, irqwork);
+
+	mutex_lock(&rtc->ops_lock);
+again:
+	__rtc_read_time(rtc, &tm);
+	now = rtc_tm_to_ktime(tm);
+	while ((next = timerqueue_getnext(&rtc->timerqueue))) {
+		if (next->expires > now)
+			break;
+
+		/* expire timer */
+		timer = container_of(next, struct rtc_timer, node);
+		timerqueue_del(&rtc->timerqueue, &timer->node);
+		timer->enabled = 0;
+		if (timer->task.func)
+			timer->task.func(timer->task.private_data);
+
+		/* Re-add/fwd periodic timers */
+		if (ktime_to_ns(timer->period)) {
+			timer->node.expires = ktime_add(timer->node.expires,
+							timer->period);
+			timer->enabled = 1;
+			timerqueue_add(&rtc->timerqueue, &timer->node);
+		}
+	}
+
+	/* Set next alarm */
+	if (next) {
+		struct rtc_wkalrm alarm;
+		int err;
+		int retry = 3;
+
+		alarm.time = rtc_ktime_to_tm(next->expires);
+		alarm.enabled = 1;
+reprogram:
+		err = __rtc_set_alarm(rtc, &alarm);
+		if (err == -ETIME)
+			goto again;
+		else if (err) {
+			if (retry-- > 0)
+				goto reprogram;
+
+			timer = container_of(next, struct rtc_timer, node);
+			timerqueue_del(&rtc->timerqueue, &timer->node);
+			timer->enabled = 0;
+			dev_err(&rtc->dev, "__rtc_set_alarm: err=%d\n", err);
+			goto again;
+		}
+	} else
+		rtc_alarm_disable(rtc);
+
+	pm_relax(rtc->dev.parent);
+	mutex_unlock(&rtc->ops_lock);
+}
+
+
+/* rtc_timer_init - Initializes an rtc_timer
+ * @timer: timer to be intiialized
+ * @f: function pointer to be called when timer fires
+ * @data: private data passed to function pointer
+ *
+ * Kernel interface to initializing an rtc_timer.
+ */
+void rtc_timer_init(struct rtc_timer *timer, void (*f)(void *p), void *data)
+{
+	timerqueue_init(&timer->node);
+	timer->enabled = 0;
+	timer->task.func = f;
+	timer->task.private_data = data;
+}
+
+/* rtc_timer_start - Sets an rtc_timer to fire in the future
+ * @ rtc: rtc device to be used
+ * @ timer: timer being set
+ * @ expires: time at which to expire the timer
+ * @ period: period that the timer will recur
+ *
+ * Kernel interface to set an rtc_timer
+ */
+int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer *timer,
+			ktime_t expires, ktime_t period)
+{
+	int ret = 0;
+	mutex_lock(&rtc->ops_lock);
+	if (timer->enabled)
+		rtc_timer_remove(rtc, timer);
+
+	timer->node.expires = expires;
+	timer->period = period;
+
+	ret = rtc_timer_enqueue(rtc, timer);
+
+	mutex_unlock(&rtc->ops_lock);
+	return ret;
+}
+
+/* rtc_timer_cancel - Stops an rtc_timer
+ * @ rtc: rtc device to be used
+ * @ timer: timer being set
+ *
+ * Kernel interface to cancel an rtc_timer
+ */
+void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer *timer)
+{
+	mutex_lock(&rtc->ops_lock);
+	if (timer->enabled)
+		rtc_timer_remove(rtc, timer);
+	mutex_unlock(&rtc->ops_lock);
+}
+
+/**
+ * rtc_read_offset - Read the amount of rtc offset in parts per billion
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * see below for details.
+ *
+ * Kernel interface to read rtc clock offset
+ * Returns 0 on success, or a negative number on error.
+ * If read_offset() is not implemented for the rtc, return -EINVAL
+ */
+int rtc_read_offset(struct rtc_device *rtc, long *offset)
+{
+	int ret;
+
+	if (!rtc->ops)
+		return -ENODEV;
+
+	if (!rtc->ops->read_offset)
+		return -EINVAL;
+
+	mutex_lock(&rtc->ops_lock);
+	ret = rtc->ops->read_offset(rtc->dev.parent, offset);
+	mutex_unlock(&rtc->ops_lock);
+	return ret;
+}
+
+/**
+ * rtc_set_offset - Adjusts the duration of the average second
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * Some rtc's allow an adjustment to the average duration of a second
+ * to compensate for differences in the actual clock rate due to temperature,
+ * the crystal, capacitor, etc.
+ *
+ * Kernel interface to adjust an rtc clock offset.
+ * Return 0 on success, or a negative number on error.
+ * If the rtc offset is not setable (or not implemented), return -EINVAL
+ */
+int rtc_set_offset(struct rtc_device *rtc, long offset)
+{
+	int ret;
+
+	if (!rtc->ops)
+		return -ENODEV;
+
+	if (!rtc->ops->set_offset)
+		return -EINVAL;
+
+	mutex_lock(&rtc->ops_lock);
+	ret = rtc->ops->set_offset(rtc->dev.parent, offset);
+	mutex_unlock(&rtc->ops_lock);
+	return ret;
+}
diff --git a/src/kernel/linux/v4.14/drivers/rtc/nvmem.c b/src/kernel/linux/v4.14/drivers/rtc/nvmem.c
new file mode 100644
index 0000000..8567b4e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/nvmem.c
@@ -0,0 +1,113 @@
+/*
+ * RTC subsystem, nvmem interface
+ *
+ * Copyright (C) 2017 Alexandre Belloni
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/rtc.h>
+#include <linux/sysfs.h>
+
+#include "rtc-core.h"
+
+/*
+ * Deprecated ABI compatibility, this should be removed at some point
+ */
+
+static const char nvram_warning[] = "Deprecated ABI, please use nvmem";
+
+static ssize_t
+rtc_nvram_read(struct file *filp, struct kobject *kobj,
+	       struct bin_attribute *attr,
+	       char *buf, loff_t off, size_t count)
+{
+	struct rtc_device *rtc = attr->private;
+
+	dev_warn_once(kobj_to_dev(kobj), nvram_warning);
+
+	return nvmem_device_read(rtc->nvmem, off, count, buf);
+}
+
+static ssize_t
+rtc_nvram_write(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct rtc_device *rtc = attr->private;
+
+	dev_warn_once(kobj_to_dev(kobj), nvram_warning);
+
+	return nvmem_device_write(rtc->nvmem, off, count, buf);
+}
+
+static int rtc_nvram_register(struct rtc_device *rtc)
+{
+	int err;
+
+	rtc->nvram = devm_kzalloc(rtc->dev.parent,
+				sizeof(struct bin_attribute),
+				GFP_KERNEL);
+	if (!rtc->nvram)
+		return -ENOMEM;
+
+	rtc->nvram->attr.name = "nvram";
+	rtc->nvram->attr.mode = 0644;
+	rtc->nvram->private = rtc;
+
+	sysfs_bin_attr_init(rtc->nvram);
+
+	rtc->nvram->read = rtc_nvram_read;
+	rtc->nvram->write = rtc_nvram_write;
+	rtc->nvram->size = rtc->nvmem_config->size;
+
+	err = sysfs_create_bin_file(&rtc->dev.parent->kobj,
+				    rtc->nvram);
+	if (err) {
+		devm_kfree(rtc->dev.parent, rtc->nvram);
+		rtc->nvram = NULL;
+	}
+
+	return err;
+}
+
+static void rtc_nvram_unregister(struct rtc_device *rtc)
+{
+	sysfs_remove_bin_file(&rtc->dev.parent->kobj, rtc->nvram);
+}
+
+/*
+ * New ABI, uses nvmem
+ */
+void rtc_nvmem_register(struct rtc_device *rtc)
+{
+	if (!rtc->nvmem_config)
+		return;
+
+	rtc->nvmem_config->dev = &rtc->dev;
+	rtc->nvmem_config->owner = rtc->owner;
+	rtc->nvmem = nvmem_register(rtc->nvmem_config);
+	if (IS_ERR_OR_NULL(rtc->nvmem))
+		return;
+
+	/* Register the old ABI */
+	if (rtc->nvram_old_abi)
+		rtc_nvram_register(rtc);
+}
+
+void rtc_nvmem_unregister(struct rtc_device *rtc)
+{
+	if (IS_ERR_OR_NULL(rtc->nvmem))
+		return;
+
+	/* unregister the old ABI */
+	if (rtc->nvram)
+		rtc_nvram_unregister(rtc);
+
+	nvmem_unregister(rtc->nvmem);
+}
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm80x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm80x.c
new file mode 100644
index 0000000..7da2a1f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm80x.c
@@ -0,0 +1,379 @@
+/*
+ * Real Time Clock driver for Marvell 88PM80x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ *  Wenzeng Chen<wzch@marvell.com>
+ *  Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/rtc.h>
+
+#define PM800_RTC_COUNTER1		(0xD1)
+#define PM800_RTC_COUNTER2		(0xD2)
+#define PM800_RTC_COUNTER3		(0xD3)
+#define PM800_RTC_COUNTER4		(0xD4)
+#define PM800_RTC_EXPIRE1_1		(0xD5)
+#define PM800_RTC_EXPIRE1_2		(0xD6)
+#define PM800_RTC_EXPIRE1_3		(0xD7)
+#define PM800_RTC_EXPIRE1_4		(0xD8)
+#define PM800_RTC_TRIM1			(0xD9)
+#define PM800_RTC_TRIM2			(0xDA)
+#define PM800_RTC_TRIM3			(0xDB)
+#define PM800_RTC_TRIM4			(0xDC)
+#define PM800_RTC_EXPIRE2_1		(0xDD)
+#define PM800_RTC_EXPIRE2_2		(0xDE)
+#define PM800_RTC_EXPIRE2_3		(0xDF)
+#define PM800_RTC_EXPIRE2_4		(0xE0)
+
+#define PM800_POWER_DOWN_LOG1	(0xE5)
+#define PM800_POWER_DOWN_LOG2	(0xE6)
+
+struct pm80x_rtc_info {
+	struct pm80x_chip *chip;
+	struct regmap *map;
+	struct rtc_device *rtc_dev;
+	struct device *dev;
+	struct delayed_work calib_work;
+
+	int irq;
+	int vrtc;
+};
+
+static irqreturn_t rtc_update_handler(int irq, void *data)
+{
+	struct pm80x_rtc_info *info = (struct pm80x_rtc_info *)data;
+	int mask;
+
+	mask = PM800_ALARM | PM800_ALARM_WAKEUP;
+	regmap_update_bits(info->map, PM800_RTC_CONTROL, mask | PM800_ALARM1_EN,
+			   mask);
+	rtc_update_irq(info->rtc_dev, 1, RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int pm80x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+
+	if (enabled)
+		regmap_update_bits(info->map, PM800_RTC_CONTROL,
+				   PM800_ALARM1_EN, PM800_ALARM1_EN);
+	else
+		regmap_update_bits(info->map, PM800_RTC_CONTROL,
+				   PM800_ALARM1_EN, 0);
+	return 0;
+}
+
+/*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+ */
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
+				struct rtc_time *alrm)
+{
+	unsigned long next_time;
+	unsigned long now_time;
+
+	next->tm_year = now->tm_year;
+	next->tm_mon = now->tm_mon;
+	next->tm_mday = now->tm_mday;
+	next->tm_hour = alrm->tm_hour;
+	next->tm_min = alrm->tm_min;
+	next->tm_sec = alrm->tm_sec;
+
+	rtc_tm_to_time(now, &now_time);
+	rtc_tm_to_time(next, &next_time);
+
+	if (next_time < now_time) {
+		/* Advance one day */
+		next_time += 60 * 60 * 24;
+		rtc_time_to_tm(next_time, next);
+	}
+}
+
+static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[4];
+	unsigned long ticks, base, data;
+	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+	/* load 32-bit read-only counter */
+	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+	rtc_time_to_tm(ticks, tm);
+	return 0;
+}
+
+static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[4];
+	unsigned long ticks, base, data;
+	if ((tm->tm_year < 70) || (tm->tm_year > 138)) {
+		dev_dbg(info->dev,
+			"Set time %d out of range. Please set time between 1970 to 2038.\n",
+			1900 + tm->tm_year);
+		return -EINVAL;
+	}
+	rtc_tm_to_time(tm, &ticks);
+
+	/* load 32-bit read-only counter */
+	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	base = ticks - data;
+	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+	buf[0] = base & 0xFF;
+	buf[1] = (base >> 8) & 0xFF;
+	buf[2] = (base >> 16) & 0xFF;
+	buf[3] = (base >> 24) & 0xFF;
+	regmap_raw_write(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+
+	return 0;
+}
+
+static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[4];
+	unsigned long ticks, base, data;
+	int ret;
+
+	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+	regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	rtc_time_to_tm(ticks, &alrm->time);
+	regmap_read(info->map, PM800_RTC_CONTROL, &ret);
+	alrm->enabled = (ret & PM800_ALARM1_EN) ? 1 : 0;
+	alrm->pending = (ret & (PM800_ALARM | PM800_ALARM_WAKEUP)) ? 1 : 0;
+	return 0;
+}
+
+static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+	struct rtc_time now_tm, alarm_tm;
+	unsigned long ticks, base, data;
+	unsigned char buf[4];
+	int mask;
+
+	regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
+
+	regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+	base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+	/* load 32-bit read-only counter */
+	regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	rtc_time_to_tm(ticks, &now_tm);
+	dev_dbg(info->dev, "%s, now time : %lu\n", __func__, ticks);
+	rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
+	/* get new ticks for alarm in 24 hours */
+	rtc_tm_to_time(&alarm_tm, &ticks);
+	dev_dbg(info->dev, "%s, alarm time: %lu\n", __func__, ticks);
+	data = ticks - base;
+
+	buf[0] = data & 0xff;
+	buf[1] = (data >> 8) & 0xff;
+	buf[2] = (data >> 16) & 0xff;
+	buf[3] = (data >> 24) & 0xff;
+	regmap_raw_write(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
+	if (alrm->enabled) {
+		mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
+		regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, mask);
+	} else {
+		mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
+		regmap_update_bits(info->map, PM800_RTC_CONTROL, mask,
+				   PM800_ALARM | PM800_ALARM_WAKEUP);
+	}
+	return 0;
+}
+
+static const struct rtc_class_ops pm80x_rtc_ops = {
+	.read_time = pm80x_rtc_read_time,
+	.set_time = pm80x_rtc_set_time,
+	.read_alarm = pm80x_rtc_read_alarm,
+	.set_alarm = pm80x_rtc_set_alarm,
+	.alarm_irq_enable = pm80x_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int pm80x_rtc_suspend(struct device *dev)
+{
+	return pm80x_dev_suspend(dev);
+}
+
+static int pm80x_rtc_resume(struct device *dev)
+{
+	return pm80x_dev_resume(dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm80x_rtc_pm_ops, pm80x_rtc_suspend, pm80x_rtc_resume);
+
+static int pm80x_rtc_probe(struct platform_device *pdev)
+{
+	struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm80x_rtc_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct pm80x_rtc_info *info;
+	struct device_node *node = pdev->dev.of_node;
+	struct rtc_time tm;
+	unsigned long ticks = 0;
+	int ret;
+
+	if (!pdata && !node) {
+		dev_err(&pdev->dev,
+			"pm80x-rtc requires platform data or of_node\n");
+		return -EINVAL;
+	}
+
+	if (!pdata) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&pdev->dev, "failed to allocate memory\n");
+			return -ENOMEM;
+		}
+	}
+
+	info =
+	    devm_kzalloc(&pdev->dev, sizeof(struct pm80x_rtc_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->irq = platform_get_irq(pdev, 0);
+	if (info->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->chip = chip;
+	info->map = chip->regmap;
+	if (!info->map) {
+		dev_err(&pdev->dev, "no regmap!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, info);
+
+	ret = pm80x_request_irq(chip, info->irq, rtc_update_handler,
+				IRQF_ONESHOT, "rtc", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq, ret);
+		goto out;
+	}
+
+	ret = pm80x_rtc_read_time(&pdev->dev, &tm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read initial time.\n");
+		goto out_rtc;
+	}
+	if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
+		tm.tm_year = 70;
+		tm.tm_mon = 0;
+		tm.tm_mday = 1;
+		tm.tm_hour = 0;
+		tm.tm_min = 0;
+		tm.tm_sec = 0;
+		ret = pm80x_rtc_set_time(&pdev->dev, &tm);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to set initial time.\n");
+			goto out_rtc;
+		}
+	}
+	rtc_tm_to_time(&tm, &ticks);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm80x-rtc",
+					    &pm80x_rtc_ops, THIS_MODULE);
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		goto out_rtc;
+	}
+	/*
+	 * enable internal XO instead of internal 3.25MHz clock since it can
+	 * free running in PMIC power-down state.
+	 */
+	regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_RTC1_USE_XO,
+			   PM800_RTC1_USE_XO);
+
+	/* remember whether this power up is caused by PMIC RTC or not */
+	info->rtc_dev->dev.platform_data = &pdata->rtc_wakeup;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+out_rtc:
+	pm80x_free_irq(chip, info->irq, info);
+out:
+	return ret;
+}
+
+static int pm80x_rtc_remove(struct platform_device *pdev)
+{
+	struct pm80x_rtc_info *info = platform_get_drvdata(pdev);
+	pm80x_free_irq(info->chip, info->irq, info);
+	return 0;
+}
+
+static struct platform_driver pm80x_rtc_driver = {
+	.driver = {
+		   .name = "88pm80x-rtc",
+		   .pm = &pm80x_rtc_pm_ops,
+		   },
+	.probe = pm80x_rtc_probe,
+	.remove = pm80x_rtc_remove,
+};
+
+module_platform_driver(pm80x_rtc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Marvell 88PM80x RTC driver");
+MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
+MODULE_ALIAS("platform:88pm80x-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm860x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm860x.c
new file mode 100644
index 0000000..efbbde7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-88pm860x.c
@@ -0,0 +1,470 @@
+/*
+ * Real Time Clock driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2010 Marvell International Ltd.
+ * Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm860x.h>
+
+#define VRTC_CALIBRATION
+
+struct pm860x_rtc_info {
+	struct pm860x_chip	*chip;
+	struct i2c_client	*i2c;
+	struct rtc_device	*rtc_dev;
+	struct device		*dev;
+	struct delayed_work	calib_work;
+
+	int			irq;
+	int			vrtc;
+	int			(*sync)(unsigned int ticks);
+};
+
+#define REG_VRTC_MEAS1		0x7D
+
+#define REG0_ADDR		0xB0
+#define REG1_ADDR		0xB2
+#define REG2_ADDR		0xB4
+#define REG3_ADDR		0xB6
+
+#define REG0_DATA		0xB1
+#define REG1_DATA		0xB3
+#define REG2_DATA		0xB5
+#define REG3_DATA		0xB7
+
+/* bit definitions of Measurement Enable Register 2 (0x51) */
+#define MEAS2_VRTC		(1 << 0)
+
+/* bit definitions of RTC Register 1 (0xA0) */
+#define ALARM_EN		(1 << 3)
+#define ALARM_WAKEUP		(1 << 4)
+#define ALARM			(1 << 5)
+#define RTC1_USE_XO		(1 << 7)
+
+#define VRTC_CALIB_INTERVAL	(HZ * 60 * 10)		/* 10 minutes */
+
+static irqreturn_t rtc_update_handler(int irq, void *data)
+{
+	struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
+	int mask;
+
+	mask = ALARM | ALARM_WAKEUP;
+	pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
+	rtc_update_irq(info->rtc_dev, 1, RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
+
+	if (enabled)
+		pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
+	else
+		pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
+	return 0;
+}
+
+/*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+ */
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
+				struct rtc_time *alrm)
+{
+	unsigned long next_time;
+	unsigned long now_time;
+
+	next->tm_year = now->tm_year;
+	next->tm_mon = now->tm_mon;
+	next->tm_mday = now->tm_mday;
+	next->tm_hour = alrm->tm_hour;
+	next->tm_min = alrm->tm_min;
+	next->tm_sec = alrm->tm_sec;
+
+	rtc_tm_to_time(now, &now_time);
+	rtc_tm_to_time(next, &next_time);
+
+	if (next_time < now_time) {
+		/* Advance one day */
+		next_time += 60 * 60 * 24;
+		rtc_time_to_tm(next_time, next);
+	}
+}
+
+static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[8];
+	unsigned long ticks, base, data;
+
+	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
+	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
+		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
+
+	/* load 32-bit read-only counter */
+	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	rtc_time_to_tm(ticks, tm);
+
+	return 0;
+}
+
+static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[4];
+	unsigned long ticks, base, data;
+
+	if ((tm->tm_year < 70) || (tm->tm_year > 138)) {
+		dev_dbg(info->dev, "Set time %d out of range. "
+			"Please set time between 1970 to 2038.\n",
+			1900 + tm->tm_year);
+		return -EINVAL;
+	}
+	rtc_tm_to_time(tm, &ticks);
+
+	/* load 32-bit read-only counter */
+	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	base = ticks - data;
+	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
+	pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
+	pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
+	pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
+
+	if (info->sync)
+		info->sync(ticks);
+	return 0;
+}
+
+static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[8];
+	unsigned long ticks, base, data;
+	int ret;
+
+	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
+	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
+		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
+
+	pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	rtc_time_to_tm(ticks, &alrm->time);
+	ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
+	alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
+	alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
+	return 0;
+}
+
+static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pm860x_rtc_info *info = dev_get_drvdata(dev);
+	struct rtc_time now_tm, alarm_tm;
+	unsigned long ticks, base, data;
+	unsigned char buf[8];
+	int mask;
+
+	pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
+
+	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
+	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
+		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
+
+	/* load 32-bit read-only counter */
+	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
+	ticks = base + data;
+	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+		base, data, ticks);
+
+	rtc_time_to_tm(ticks, &now_tm);
+	rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
+	/* get new ticks for alarm in 24 hours */
+	rtc_tm_to_time(&alarm_tm, &ticks);
+	data = ticks - base;
+
+	buf[0] = data & 0xff;
+	buf[1] = (data >> 8) & 0xff;
+	buf[2] = (data >> 16) & 0xff;
+	buf[3] = (data >> 24) & 0xff;
+	pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
+	if (alrm->enabled) {
+		mask = ALARM | ALARM_WAKEUP | ALARM_EN;
+		pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
+	} else {
+		mask = ALARM | ALARM_WAKEUP | ALARM_EN;
+		pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
+				ALARM | ALARM_WAKEUP);
+	}
+	return 0;
+}
+
+static const struct rtc_class_ops pm860x_rtc_ops = {
+	.read_time	= pm860x_rtc_read_time,
+	.set_time	= pm860x_rtc_set_time,
+	.read_alarm	= pm860x_rtc_read_alarm,
+	.set_alarm	= pm860x_rtc_set_alarm,
+	.alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
+};
+
+#ifdef VRTC_CALIBRATION
+static void calibrate_vrtc_work(struct work_struct *work)
+{
+	struct pm860x_rtc_info *info = container_of(work,
+		struct pm860x_rtc_info, calib_work.work);
+	unsigned char buf[2];
+	unsigned int sum, data, mean, vrtc_set;
+	int i;
+
+	for (i = 0, sum = 0; i < 16; i++) {
+		msleep(100);
+		pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
+		data = (buf[0] << 4) | buf[1];
+		data = (data * 5400) >> 12;	/* convert to mv */
+		sum += data;
+	}
+	mean = sum >> 4;
+	vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
+	dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
+
+	sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
+	data = sum & 0x3;
+	if ((mean + 200) < vrtc_set) {
+		/* try higher voltage */
+		if (++data == 4)
+			goto out;
+		data = (sum & 0xf8) | (data & 0x3);
+		pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
+	} else if ((mean - 200) > vrtc_set) {
+		/* try lower voltage */
+		if (data-- == 0)
+			goto out;
+		data = (sum & 0xf8) | (data & 0x3);
+		pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
+	} else
+		goto out;
+	dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
+	/* trigger next calibration since VRTC is updated */
+	schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
+	return;
+out:
+	/* disable measurement */
+	pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
+	dev_dbg(info->dev, "finish VRTC calibration\n");
+	return;
+}
+#endif
+
+#ifdef CONFIG_OF
+static int pm860x_rtc_dt_init(struct platform_device *pdev,
+			      struct pm860x_rtc_info *info)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	int ret;
+	if (!np)
+		return -ENODEV;
+	np = of_get_child_by_name(np, "rtc");
+	if (!np) {
+		dev_err(&pdev->dev, "failed to find rtc node\n");
+		return -ENODEV;
+	}
+	ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
+	if (ret)
+		info->vrtc = 0;
+	of_node_put(np);
+	return 0;
+}
+#else
+#define pm860x_rtc_dt_init(x, y)	(-1)
+#endif
+
+static int pm860x_rtc_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_rtc_pdata *pdata = NULL;
+	struct pm860x_rtc_info *info;
+	struct rtc_time tm;
+	unsigned long ticks = 0;
+	int ret;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->irq = platform_get_irq(pdev, 0);
+	if (info->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		return info->irq;
+	}
+
+	info->chip = chip;
+	info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, info);
+
+	info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(info->rtc_dev))
+		return PTR_ERR(info->rtc_dev);
+
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					rtc_update_handler, IRQF_ONESHOT, "rtc",
+					info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	/* set addresses of 32-bit base value for RTC time */
+	pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
+	pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
+	pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
+	pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
+
+	ret = pm860x_rtc_read_time(&pdev->dev, &tm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read initial time.\n");
+		return ret;
+	}
+	if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
+		tm.tm_year = 70;
+		tm.tm_mon = 0;
+		tm.tm_mday = 1;
+		tm.tm_hour = 0;
+		tm.tm_min = 0;
+		tm.tm_sec = 0;
+		ret = pm860x_rtc_set_time(&pdev->dev, &tm);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to set initial time.\n");
+			return ret;
+		}
+	}
+	rtc_tm_to_time(&tm, &ticks);
+	if (pm860x_rtc_dt_init(pdev, info)) {
+		if (pdata && pdata->sync) {
+			pdata->sync(ticks);
+			info->sync = pdata->sync;
+		}
+	}
+
+	info->rtc_dev->ops = &pm860x_rtc_ops;
+
+	ret = rtc_register_device(info->rtc_dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * enable internal XO instead of internal 3.25MHz clock since it can
+	 * free running in PMIC power-down state.
+	 */
+	pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
+
+#ifdef VRTC_CALIBRATION
+	/* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
+	if (pm860x_rtc_dt_init(pdev, info)) {
+		if (pdata && pdata->vrtc)
+			info->vrtc = pdata->vrtc & 0x3;
+		else
+			info->vrtc = 1;
+	}
+	pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
+
+	/* calibrate VRTC */
+	INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
+	schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
+#endif	/* VRTC_CALIBRATION */
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int pm860x_rtc_remove(struct platform_device *pdev)
+{
+	struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
+
+#ifdef VRTC_CALIBRATION
+	cancel_delayed_work_sync(&info->calib_work);
+	/* disable measurement */
+	pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
+#endif	/* VRTC_CALIBRATION */
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
+	return 0;
+}
+static int pm860x_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
+
+static struct platform_driver pm860x_rtc_driver = {
+	.driver		= {
+		.name	= "88pm860x-rtc",
+		.pm	= &pm860x_rtc_pm_ops,
+	},
+	.probe		= pm860x_rtc_probe,
+	.remove		= pm860x_rtc_remove,
+};
+
+module_platform_driver(pm860x_rtc_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ab-b5ze-s3.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab-b5ze-s3.c
new file mode 100644
index 0000000..a319bf1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab-b5ze-s3.c
@@ -0,0 +1,1035 @@
+/*
+ * rtc-ab-b5ze-s3 - Driver for Abracon AB-RTCMC-32.768Khz-B5ZE-S3
+ *                  I2C RTC / Alarm chip
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Detailed datasheet of the chip is available here:
+ *
+ *  http://www.abracon.com/realtimeclock/AB-RTCMC-32.768kHz-B5ZE-S3-Application-Manual.pdf
+ *
+ * This work is based on ISL12057 driver (drivers/rtc/rtc-isl12057.c).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+
+#define DRV_NAME "rtc-ab-b5ze-s3"
+
+/* Control section */
+#define ABB5ZES3_REG_CTRL1	   0x00	   /* Control 1 register */
+#define ABB5ZES3_REG_CTRL1_CIE	   BIT(0)  /* Pulse interrupt enable */
+#define ABB5ZES3_REG_CTRL1_AIE	   BIT(1)  /* Alarm interrupt enable */
+#define ABB5ZES3_REG_CTRL1_SIE	   BIT(2)  /* Second interrupt enable */
+#define ABB5ZES3_REG_CTRL1_PM	   BIT(3)  /* 24h/12h mode */
+#define ABB5ZES3_REG_CTRL1_SR	   BIT(4)  /* Software reset */
+#define ABB5ZES3_REG_CTRL1_STOP	   BIT(5)  /* RTC circuit enable */
+#define ABB5ZES3_REG_CTRL1_CAP	   BIT(7)
+
+#define ABB5ZES3_REG_CTRL2	   0x01	   /* Control 2 register */
+#define ABB5ZES3_REG_CTRL2_CTBIE   BIT(0)  /* Countdown timer B int. enable */
+#define ABB5ZES3_REG_CTRL2_CTAIE   BIT(1)  /* Countdown timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_WTAIE   BIT(2)  /* Watchdog timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_AF	   BIT(3)  /* Alarm interrupt status */
+#define ABB5ZES3_REG_CTRL2_SF	   BIT(4)  /* Second interrupt status */
+#define ABB5ZES3_REG_CTRL2_CTBF	   BIT(5)  /* Countdown timer B int. status */
+#define ABB5ZES3_REG_CTRL2_CTAF	   BIT(6)  /* Countdown timer A int. status */
+#define ABB5ZES3_REG_CTRL2_WTAF	   BIT(7)  /* Watchdog timer A int. status */
+
+#define ABB5ZES3_REG_CTRL3	   0x02	   /* Control 3 register */
+#define ABB5ZES3_REG_CTRL3_PM2	   BIT(7)  /* Power Management bit 2 */
+#define ABB5ZES3_REG_CTRL3_PM1	   BIT(6)  /* Power Management bit 1 */
+#define ABB5ZES3_REG_CTRL3_PM0	   BIT(5)  /* Power Management bit 0 */
+#define ABB5ZES3_REG_CTRL3_BSF	   BIT(3)  /* Battery switchover int. status */
+#define ABB5ZES3_REG_CTRL3_BLF	   BIT(2)  /* Battery low int. status */
+#define ABB5ZES3_REG_CTRL3_BSIE	   BIT(1)  /* Battery switchover int. enable */
+#define ABB5ZES3_REG_CTRL3_BLIE	   BIT(0)  /* Battery low int. enable */
+
+#define ABB5ZES3_CTRL_SEC_LEN	   3
+
+/* RTC section */
+#define ABB5ZES3_REG_RTC_SC	   0x03	   /* RTC Seconds register */
+#define ABB5ZES3_REG_RTC_SC_OSC	   BIT(7)  /* Clock integrity status */
+#define ABB5ZES3_REG_RTC_MN	   0x04	   /* RTC Minutes register */
+#define ABB5ZES3_REG_RTC_HR	   0x05	   /* RTC Hours register */
+#define ABB5ZES3_REG_RTC_HR_PM	   BIT(5)  /* RTC Hours PM bit */
+#define ABB5ZES3_REG_RTC_DT	   0x06	   /* RTC Date register */
+#define ABB5ZES3_REG_RTC_DW	   0x07	   /* RTC Day of the week register */
+#define ABB5ZES3_REG_RTC_MO	   0x08	   /* RTC Month register */
+#define ABB5ZES3_REG_RTC_YR	   0x09	   /* RTC Year register */
+
+#define ABB5ZES3_RTC_SEC_LEN	   7
+
+/* Alarm section (enable bits are all active low) */
+#define ABB5ZES3_REG_ALRM_MN	   0x0A	   /* Alarm - minute register */
+#define ABB5ZES3_REG_ALRM_MN_AE	   BIT(7)  /* Minute enable */
+#define ABB5ZES3_REG_ALRM_HR	   0x0B	   /* Alarm - hours register */
+#define ABB5ZES3_REG_ALRM_HR_AE	   BIT(7)  /* Hour enable */
+#define ABB5ZES3_REG_ALRM_DT	   0x0C	   /* Alarm - date register */
+#define ABB5ZES3_REG_ALRM_DT_AE	   BIT(7)  /* Date (day of the month) enable */
+#define ABB5ZES3_REG_ALRM_DW	   0x0D	   /* Alarm - day of the week reg. */
+#define ABB5ZES3_REG_ALRM_DW_AE	   BIT(7)  /* Day of the week enable */
+
+#define ABB5ZES3_ALRM_SEC_LEN	   4
+
+/* Frequency offset section */
+#define ABB5ZES3_REG_FREQ_OF	   0x0E	   /* Frequency offset register */
+#define ABB5ZES3_REG_FREQ_OF_MODE  0x0E	   /* Offset mode: 2 hours / minute */
+
+/* CLOCKOUT section */
+#define ABB5ZES3_REG_TIM_CLK	   0x0F	   /* Timer & Clockout register */
+#define ABB5ZES3_REG_TIM_CLK_TAM   BIT(7)  /* Permanent/pulsed timer A/int. 2 */
+#define ABB5ZES3_REG_TIM_CLK_TBM   BIT(6)  /* Permanent/pulsed timer B */
+#define ABB5ZES3_REG_TIM_CLK_COF2  BIT(5)  /* Clkout Freq bit 2 */
+#define ABB5ZES3_REG_TIM_CLK_COF1  BIT(4)  /* Clkout Freq bit 1 */
+#define ABB5ZES3_REG_TIM_CLK_COF0  BIT(3)  /* Clkout Freq bit 0 */
+#define ABB5ZES3_REG_TIM_CLK_TAC1  BIT(2)  /* Timer A: - 01 : countdown */
+#define ABB5ZES3_REG_TIM_CLK_TAC0  BIT(1)  /*	       - 10 : timer	*/
+#define ABB5ZES3_REG_TIM_CLK_TBC   BIT(0)  /* Timer B enable */
+
+/* Timer A Section */
+#define ABB5ZES3_REG_TIMA_CLK	   0x10	   /* Timer A clock register */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ2 BIT(2)  /* Freq bit 2 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ1 BIT(1)  /* Freq bit 1 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ0 BIT(0)  /* Freq bit 0 */
+#define ABB5ZES3_REG_TIMA	   0x11	   /* Timer A register */
+
+#define ABB5ZES3_TIMA_SEC_LEN	   2
+
+/* Timer B Section */
+#define ABB5ZES3_REG_TIMB_CLK	   0x12	   /* Timer B clock register */
+#define ABB5ZES3_REG_TIMB_CLK_TBW2 BIT(6)
+#define ABB5ZES3_REG_TIMB_CLK_TBW1 BIT(5)
+#define ABB5ZES3_REG_TIMB_CLK_TBW0 BIT(4)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ2 BIT(2)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ1 BIT(1)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ0 BIT(0)
+#define ABB5ZES3_REG_TIMB	   0x13	   /* Timer B register */
+#define ABB5ZES3_TIMB_SEC_LEN	   2
+
+#define ABB5ZES3_MEM_MAP_LEN	   0x14
+
+struct abb5zes3_rtc_data {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+	struct mutex lock;
+
+	int irq;
+
+	bool battery_low;
+	bool timer_alarm; /* current alarm is via timer A */
+};
+
+/*
+ * Try and match register bits w/ fixed null values to see whether we
+ * are dealing with an ABB5ZES3. Note: this function is called early
+ * during init and hence does need mutex protection.
+ */
+static int abb5zes3_i2c_validate_chip(struct regmap *regmap)
+{
+	u8 regs[ABB5ZES3_MEM_MAP_LEN];
+	static const u8 mask[ABB5ZES3_MEM_MAP_LEN] = { 0x00, 0x00, 0x10, 0x00,
+						       0x80, 0xc0, 0xc0, 0xf8,
+						       0xe0, 0x00, 0x00, 0x40,
+						       0x40, 0x78, 0x00, 0x00,
+						       0xf8, 0x00, 0x88, 0x00 };
+	int ret, i;
+
+	ret = regmap_bulk_read(regmap, 0, regs, ABB5ZES3_MEM_MAP_LEN);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ABB5ZES3_MEM_MAP_LEN; ++i) {
+		if (regs[i] & mask[i]) /* check if bits are cleared */
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* Clear alarm status bit. */
+static int _abb5zes3_rtc_clear_alarm(struct device *dev)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+				 ABB5ZES3_REG_CTRL2_AF, 0);
+	if (ret)
+		dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret);
+
+	return ret;
+}
+
+/* Enable or disable alarm (i.e. alarm interrupt generation) */
+static int _abb5zes3_rtc_update_alarm(struct device *dev, bool enable)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL1,
+				 ABB5ZES3_REG_CTRL1_AIE,
+				 enable ? ABB5ZES3_REG_CTRL1_AIE : 0);
+	if (ret)
+		dev_err(dev, "%s: writing alarm INT failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+/* Enable or disable timer (watchdog timer A interrupt generation) */
+static int _abb5zes3_rtc_update_timer(struct device *dev, bool enable)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+				 ABB5ZES3_REG_CTRL2_WTAIE,
+				 enable ? ABB5ZES3_REG_CTRL2_WTAIE : 0);
+	if (ret)
+		dev_err(dev, "%s: writing timer INT failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+/*
+ * Note: we only read, so regmap inner lock protection is sufficient, i.e.
+ * we do not need driver's main lock protection.
+ */
+static int _abb5zes3_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+	int ret;
+
+	/*
+	 * As we need to read CTRL1 register anyway to access 24/12h
+	 * mode bit, we do a single bulk read of both control and RTC
+	 * sections (they are consecutive). This also ease indexing
+	 * of register values after bulk read.
+	 */
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_CTRL1, regs,
+			       sizeof(regs));
+	if (ret) {
+		dev_err(dev, "%s: reading RTC time failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	/* If clock integrity is not guaranteed, do not return a time value */
+	if (regs[ABB5ZES3_REG_RTC_SC] & ABB5ZES3_REG_RTC_SC_OSC) {
+		ret = -ENODATA;
+		goto err;
+	}
+
+	tm->tm_sec = bcd2bin(regs[ABB5ZES3_REG_RTC_SC] & 0x7F);
+	tm->tm_min = bcd2bin(regs[ABB5ZES3_REG_RTC_MN]);
+
+	if (regs[ABB5ZES3_REG_CTRL1] & ABB5ZES3_REG_CTRL1_PM) { /* 12hr mode */
+		tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR] & 0x1f);
+		if (regs[ABB5ZES3_REG_RTC_HR] & ABB5ZES3_REG_RTC_HR_PM) /* PM */
+			tm->tm_hour += 12;
+	} else {						/* 24hr mode */
+		tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR]);
+	}
+
+	tm->tm_mday = bcd2bin(regs[ABB5ZES3_REG_RTC_DT]);
+	tm->tm_wday = bcd2bin(regs[ABB5ZES3_REG_RTC_DW]);
+	tm->tm_mon  = bcd2bin(regs[ABB5ZES3_REG_RTC_MO]) - 1; /* starts at 1 */
+	tm->tm_year = bcd2bin(regs[ABB5ZES3_REG_RTC_YR]) + 100;
+
+	ret = rtc_valid_tm(tm);
+
+err:
+	return ret;
+}
+
+static int abb5zes3_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+	int ret;
+
+	/*
+	 * Year register is 8-bit wide and bcd-coded, i.e records values
+	 * between 0 and 99. tm_year is an offset from 1900 and we are
+	 * interested in the 2000-2099 range, so any value less than 100
+	 * is invalid.
+	 */
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	regs[ABB5ZES3_REG_RTC_SC] = bin2bcd(tm->tm_sec); /* MSB=0 clears OSC */
+	regs[ABB5ZES3_REG_RTC_MN] = bin2bcd(tm->tm_min);
+	regs[ABB5ZES3_REG_RTC_HR] = bin2bcd(tm->tm_hour); /* 24-hour format */
+	regs[ABB5ZES3_REG_RTC_DT] = bin2bcd(tm->tm_mday);
+	regs[ABB5ZES3_REG_RTC_DW] = bin2bcd(tm->tm_wday);
+	regs[ABB5ZES3_REG_RTC_MO] = bin2bcd(tm->tm_mon + 1);
+	regs[ABB5ZES3_REG_RTC_YR] = bin2bcd(tm->tm_year - 100);
+
+	mutex_lock(&data->lock);
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_RTC_SC,
+				regs + ABB5ZES3_REG_RTC_SC,
+				ABB5ZES3_RTC_SEC_LEN);
+	mutex_unlock(&data->lock);
+
+
+	return ret;
+}
+
+/*
+ * Set provided TAQ and Timer A registers (TIMA_CLK and TIMA) based on
+ * given number of seconds.
+ */
+static inline void sec_to_timer_a(u8 secs, u8 *taq, u8 *timer_a)
+{
+	*taq = ABB5ZES3_REG_TIMA_CLK_TAQ1; /* 1Hz */
+	*timer_a = secs;
+}
+
+/*
+ * Return current number of seconds in Timer A. As we only use
+ * timer A with a 1Hz freq, this is what we expect to have.
+ */
+static inline int sec_from_timer_a(u8 *secs, u8 taq, u8 timer_a)
+{
+	if (taq != ABB5ZES3_REG_TIMA_CLK_TAQ1) /* 1Hz */
+		return -EINVAL;
+
+	*secs = timer_a;
+
+	return 0;
+}
+
+/*
+ * Read alarm currently configured via a watchdog timer using timer A. This
+ * is done by reading current RTC time and adding remaining timer time.
+ */
+static int _abb5zes3_rtc_read_timer(struct device *dev,
+				    struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+	u8 regs[ABB5ZES3_TIMA_SEC_LEN + 1];
+	unsigned long rtc_secs;
+	unsigned int reg;
+	u8 timer_secs;
+	int ret;
+
+	/*
+	 * Instead of doing two separate calls, because they are consecutive,
+	 * we grab both clockout register and Timer A section. The latter is
+	 * used to decide if timer A is enabled (as a watchdog timer).
+	 */
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_TIM_CLK, regs,
+			       ABB5ZES3_TIMA_SEC_LEN + 1);
+	if (ret) {
+		dev_err(dev, "%s: reading Timer A section failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	/* get current time ... */
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		goto err;
+
+	/* ... convert to seconds ... */
+	ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+	if (ret)
+		goto err;
+
+	/* ... add remaining timer A time ... */
+	ret = sec_from_timer_a(&timer_secs, regs[1], regs[2]);
+	if (ret)
+		goto err;
+
+	/* ... and convert back. */
+	rtc_time_to_tm(rtc_secs + timer_secs, alarm_tm);
+
+	ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL2, &reg);
+	if (ret) {
+		dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL2_WTAIE);
+
+err:
+	return ret;
+}
+
+/* Read alarm currently configured via a RTC alarm registers. */
+static int _abb5zes3_rtc_read_alarm(struct device *dev,
+				    struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+	unsigned long rtc_secs, alarm_secs;
+	u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+			       ABB5ZES3_ALRM_SEC_LEN);
+	if (ret) {
+		dev_err(dev, "%s: reading alarm section failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	alarm_tm->tm_sec  = 0;
+	alarm_tm->tm_min  = bcd2bin(regs[0] & 0x7f);
+	alarm_tm->tm_hour = bcd2bin(regs[1] & 0x3f);
+	alarm_tm->tm_mday = bcd2bin(regs[2] & 0x3f);
+	alarm_tm->tm_wday = -1;
+
+	/*
+	 * The alarm section does not store year/month. We use the ones in rtc
+	 * section as a basis and increment month and then year if needed to get
+	 * alarm after current time.
+	 */
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		goto err;
+
+	alarm_tm->tm_year = rtc_tm.tm_year;
+	alarm_tm->tm_mon = rtc_tm.tm_mon;
+
+	ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+	if (ret)
+		goto err;
+
+	ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+	if (ret)
+		goto err;
+
+	if (alarm_secs < rtc_secs) {
+		if (alarm_tm->tm_mon == 11) {
+			alarm_tm->tm_mon = 0;
+			alarm_tm->tm_year += 1;
+		} else {
+			alarm_tm->tm_mon += 1;
+		}
+	}
+
+	ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL1, &reg);
+	if (ret) {
+		dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL1_AIE);
+
+err:
+	return ret;
+}
+
+/*
+ * As the Alarm mechanism supported by the chip is only accurate to the
+ * minute, we use the watchdog timer mechanism provided by timer A
+ * (up to 256 seconds w/ a second accuracy) for low alarm values (below
+ * 4 minutes). Otherwise, we use the common alarm mechanism provided
+ * by the chip. In order for that to work, we keep track of currently
+ * configured timer type via 'timer_alarm' flag in our private data
+ * structure.
+ */
+static int abb5zes3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	if (data->timer_alarm)
+		ret = _abb5zes3_rtc_read_timer(dev, alarm);
+	else
+		ret = _abb5zes3_rtc_read_alarm(dev, alarm);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+/*
+ * Set alarm using chip alarm mechanism. It is only accurate to the
+ * minute (not the second). The function expects alarm interrupt to
+ * be disabled.
+ */
+static int _abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time *alarm_tm = &alarm->time;
+	unsigned long rtc_secs, alarm_secs;
+	u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+	struct rtc_time rtc_tm;
+	int ret, enable = 1;
+
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		goto err;
+
+	ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+	if (ret)
+		goto err;
+
+	ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+	if (ret)
+		goto err;
+
+	/* If alarm time is before current time, disable the alarm */
+	if (!alarm->enabled || alarm_secs <= rtc_secs) {
+		enable = 0;
+	} else {
+		/*
+		 * Chip only support alarms up to one month in the future. Let's
+		 * return an error if we get something after that limit.
+		 * Comparison is done by incrementing rtc_tm month field by one
+		 * and checking alarm value is still below.
+		 */
+		if (rtc_tm.tm_mon == 11) { /* handle year wrapping */
+			rtc_tm.tm_mon = 0;
+			rtc_tm.tm_year += 1;
+		} else {
+			rtc_tm.tm_mon += 1;
+		}
+
+		ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+		if (ret)
+			goto err;
+
+		if (alarm_secs > rtc_secs) {
+			dev_err(dev, "%s: alarm maximum is one month in the "
+				"future (%d)\n", __func__, ret);
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	/*
+	 * Program all alarm registers but DW one. For each register, setting
+	 * MSB to 0 enables associated alarm.
+	 */
+	regs[0] = bin2bcd(alarm_tm->tm_min) & 0x7f;
+	regs[1] = bin2bcd(alarm_tm->tm_hour) & 0x3f;
+	regs[2] = bin2bcd(alarm_tm->tm_mday) & 0x3f;
+	regs[3] = ABB5ZES3_REG_ALRM_DW_AE; /* do not match day of the week */
+
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+				ABB5ZES3_ALRM_SEC_LEN);
+	if (ret < 0) {
+		dev_err(dev, "%s: writing ALARM section failed (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	/* Record currently configured alarm is not a timer */
+	data->timer_alarm = 0;
+
+	/* Enable or disable alarm interrupt generation */
+	ret = _abb5zes3_rtc_update_alarm(dev, enable);
+
+err:
+	return ret;
+}
+
+/*
+ * Set alarm using timer watchdog (via timer A) mechanism. The function expects
+ * timer A interrupt to be disabled.
+ */
+static int _abb5zes3_rtc_set_timer(struct device *dev, struct rtc_wkalrm *alarm,
+				   u8 secs)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_TIMA_SEC_LEN];
+	u8 mask = ABB5ZES3_REG_TIM_CLK_TAC0 | ABB5ZES3_REG_TIM_CLK_TAC1;
+	int ret = 0;
+
+	/* Program given number of seconds to Timer A registers */
+	sec_to_timer_a(secs, &regs[0], &regs[1]);
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_TIMA_CLK, regs,
+				ABB5ZES3_TIMA_SEC_LEN);
+	if (ret < 0) {
+		dev_err(dev, "%s: writing timer section failed\n", __func__);
+		goto err;
+	}
+
+	/* Configure Timer A as a watchdog timer */
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_TIM_CLK,
+				 mask, ABB5ZES3_REG_TIM_CLK_TAC1);
+	if (ret)
+		dev_err(dev, "%s: failed to update timer\n", __func__);
+
+	/* Record currently configured alarm is a timer */
+	data->timer_alarm = 1;
+
+	/* Enable or disable timer interrupt generation */
+	ret = _abb5zes3_rtc_update_timer(dev, alarm->enabled);
+
+err:
+	return ret;
+}
+
+/*
+ * The chip has an alarm which is only accurate to the minute. In order to
+ * handle alarms below that limit, we use the watchdog timer function of
+ * timer A. More precisely, the timer method is used for alarms below 240
+ * seconds.
+ */
+static int abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time *alarm_tm = &alarm->time;
+	unsigned long rtc_secs, alarm_secs;
+	struct rtc_time rtc_tm;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		goto err;
+
+	ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+	if (ret)
+		goto err;
+
+	ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+	if (ret)
+		goto err;
+
+	/* Let's first disable both the alarm and the timer interrupts */
+	ret = _abb5zes3_rtc_update_alarm(dev, false);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable alarm (%d)\n", __func__,
+			ret);
+		goto err;
+	}
+	ret = _abb5zes3_rtc_update_timer(dev, false);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable timer (%d)\n", __func__,
+			ret);
+		goto err;
+	}
+
+	data->timer_alarm = 0;
+
+	/*
+	 * Let's now configure the alarm; if we are expected to ring in
+	 * more than 240s, then we setup an alarm. Otherwise, a timer.
+	 */
+	if ((alarm_secs > rtc_secs) && ((alarm_secs - rtc_secs) <= 240))
+		ret = _abb5zes3_rtc_set_timer(dev, alarm,
+					      alarm_secs - rtc_secs);
+	else
+		ret = _abb5zes3_rtc_set_alarm(dev, alarm);
+
+ err:
+	mutex_unlock(&data->lock);
+
+	if (ret)
+		dev_err(dev, "%s: unable to configure alarm (%d)\n", __func__,
+			ret);
+
+	return ret;
+ }
+
+/* Enable or disable battery low irq generation */
+static inline int _abb5zes3_rtc_battery_low_irq_enable(struct regmap *regmap,
+						       bool enable)
+{
+	return regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3,
+				  ABB5ZES3_REG_CTRL3_BLIE,
+				  enable ? ABB5ZES3_REG_CTRL3_BLIE : 0);
+}
+
+/*
+ * Check current RTC status and enable/disable what needs to be. Return 0 if
+ * everything went ok and a negative value upon error. Note: this function
+ * is called early during init and hence does need mutex protection.
+ */
+static int abb5zes3_rtc_check_setup(struct device *dev)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	unsigned int reg;
+	int ret;
+	u8 mask;
+
+	/*
+	 * By default, the devices generates a 32.768KHz signal on IRQ#1 pin. It
+	 * is disabled here to prevent polluting the interrupt line and
+	 * uselessly triggering the IRQ handler we install for alarm and battery
+	 * low events. Note: this is done before clearing int. status below
+	 * in this function.
+	 * We also disable all timers and set timer interrupt to permanent (not
+	 * pulsed).
+	 */
+	mask = (ABB5ZES3_REG_TIM_CLK_TBC | ABB5ZES3_REG_TIM_CLK_TAC0 |
+		ABB5ZES3_REG_TIM_CLK_TAC1 | ABB5ZES3_REG_TIM_CLK_COF0 |
+		ABB5ZES3_REG_TIM_CLK_COF1 | ABB5ZES3_REG_TIM_CLK_COF2 |
+		ABB5ZES3_REG_TIM_CLK_TBM | ABB5ZES3_REG_TIM_CLK_TAM);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_TIM_CLK, mask,
+		ABB5ZES3_REG_TIM_CLK_COF0 | ABB5ZES3_REG_TIM_CLK_COF1 |
+		ABB5ZES3_REG_TIM_CLK_COF2);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize clkout register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Each component of the alarm (MN, HR, DT, DW) can be enabled/disabled
+	 * individually by clearing/setting MSB of each associated register. So,
+	 * we set all alarm enable bits to disable current alarm setting.
+	 */
+	mask = (ABB5ZES3_REG_ALRM_MN_AE | ABB5ZES3_REG_ALRM_HR_AE |
+		ABB5ZES3_REG_ALRM_DT_AE | ABB5ZES3_REG_ALRM_DW_AE);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, mask);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable alarm setting (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Set Control 1 register (RTC enabled, 24hr mode, all int. disabled) */
+	mask = (ABB5ZES3_REG_CTRL1_CIE | ABB5ZES3_REG_CTRL1_AIE |
+		ABB5ZES3_REG_CTRL1_SIE | ABB5ZES3_REG_CTRL1_PM |
+		ABB5ZES3_REG_CTRL1_CAP | ABB5ZES3_REG_CTRL1_STOP);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL1, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL1 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Set Control 2 register (timer int. disabled, alarm status cleared).
+	 * WTAF is read-only and cleared automatically by reading the register.
+	 */
+	mask = (ABB5ZES3_REG_CTRL2_CTBIE | ABB5ZES3_REG_CTRL2_CTAIE |
+		ABB5ZES3_REG_CTRL2_WTAIE | ABB5ZES3_REG_CTRL2_AF |
+		ABB5ZES3_REG_CTRL2_SF | ABB5ZES3_REG_CTRL2_CTBF |
+		ABB5ZES3_REG_CTRL2_CTAF);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL2 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Enable battery low detection function and battery switchover function
+	 * (standard mode). Disable associated interrupts. Clear battery
+	 * switchover flag but not battery low flag. The latter is checked
+	 * later below.
+	 */
+	mask = (ABB5ZES3_REG_CTRL3_PM0 | ABB5ZES3_REG_CTRL3_PM1 |
+		ABB5ZES3_REG_CTRL3_PM2 | ABB5ZES3_REG_CTRL3_BLIE |
+		ABB5ZES3_REG_CTRL3_BSIE| ABB5ZES3_REG_CTRL3_BSF);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL3 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Check oscillator integrity flag */
+	ret = regmap_read(regmap, ABB5ZES3_REG_RTC_SC, &reg);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to read osc. integrity flag (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	if (reg & ABB5ZES3_REG_RTC_SC_OSC) {
+		dev_err(dev, "clock integrity not guaranteed. Osc. has stopped "
+			"or has been interrupted.\n");
+		dev_err(dev, "change battery (if not already done) and  "
+			"then set time to reset osc. failure flag.\n");
+	}
+
+	/*
+	 * Check battery low flag at startup: this allows reporting battery
+	 * is low at startup when IRQ line is not connected. Note: we record
+	 * current status to avoid reenabling this interrupt later in probe
+	 * function if battery is low.
+	 */
+	ret = regmap_read(regmap, ABB5ZES3_REG_CTRL3, &reg);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to read battery low flag (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	data->battery_low = reg & ABB5ZES3_REG_CTRL3_BLF;
+	if (data->battery_low) {
+		dev_err(dev, "RTC battery is low; please, consider "
+			"changing it!\n");
+
+		ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, false);
+		if (ret)
+			dev_err(dev, "%s: disabling battery low interrupt "
+				"generation failed (%d)\n", __func__, ret);
+	}
+
+	return ret;
+}
+
+static int abb5zes3_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enable)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (rtc_data->irq) {
+		mutex_lock(&rtc_data->lock);
+		if (rtc_data->timer_alarm)
+			ret = _abb5zes3_rtc_update_timer(dev, enable);
+		else
+			ret = _abb5zes3_rtc_update_alarm(dev, enable);
+		mutex_unlock(&rtc_data->lock);
+	}
+
+	return ret;
+}
+
+static irqreturn_t _abb5zes3_rtc_interrupt(int irq, void *data)
+{
+	struct i2c_client *client = data;
+	struct device *dev = &client->dev;
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+	struct rtc_device *rtc = rtc_data->rtc;
+	u8 regs[ABB5ZES3_CTRL_SEC_LEN];
+	int ret, handled = IRQ_NONE;
+
+	ret = regmap_bulk_read(rtc_data->regmap, 0, regs,
+			       ABB5ZES3_CTRL_SEC_LEN);
+	if (ret) {
+		dev_err(dev, "%s: unable to read control section (%d)!\n",
+			__func__, ret);
+		return handled;
+	}
+
+	/*
+	 * Check battery low detection flag and disable battery low interrupt
+	 * generation if flag is set (interrupt can only be cleared when
+	 * battery is replaced).
+	 */
+	if (regs[ABB5ZES3_REG_CTRL3] & ABB5ZES3_REG_CTRL3_BLF) {
+		dev_err(dev, "RTC battery is low; please change it!\n");
+
+		_abb5zes3_rtc_battery_low_irq_enable(rtc_data->regmap, false);
+
+		handled = IRQ_HANDLED;
+	}
+
+	/* Check alarm flag */
+	if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_AF) {
+		dev_dbg(dev, "RTC alarm!\n");
+
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+		/* Acknowledge and disable the alarm */
+		_abb5zes3_rtc_clear_alarm(dev);
+		_abb5zes3_rtc_update_alarm(dev, 0);
+
+		handled = IRQ_HANDLED;
+	}
+
+	/* Check watchdog Timer A flag */
+	if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_WTAF) {
+		dev_dbg(dev, "RTC timer!\n");
+
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+		/*
+		 * Acknowledge and disable the alarm. Note: WTAF
+		 * flag had been cleared when reading CTRL2
+		 */
+		_abb5zes3_rtc_update_timer(dev, 0);
+
+		rtc_data->timer_alarm = 0;
+
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+	.read_time = _abb5zes3_rtc_read_time,
+	.set_time = abb5zes3_rtc_set_time,
+	.read_alarm = abb5zes3_rtc_read_alarm,
+	.set_alarm = abb5zes3_rtc_set_alarm,
+	.alarm_irq_enable = abb5zes3_rtc_alarm_irq_enable,
+};
+
+static const struct regmap_config abb5zes3_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int abb5zes3_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct abb5zes3_rtc_data *data = NULL;
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &abb5zes3_rtc_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "%s: regmap allocation failed: %d\n",
+			__func__, ret);
+		goto err;
+	}
+
+	ret = abb5zes3_i2c_validate_chip(regmap);
+	if (ret)
+		goto err;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_init(&data->lock);
+	data->regmap = regmap;
+	dev_set_drvdata(dev, data);
+
+	ret = abb5zes3_rtc_check_setup(dev);
+	if (ret)
+		goto err;
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						_abb5zes3_rtc_interrupt,
+						IRQF_SHARED|IRQF_ONESHOT,
+						DRV_NAME, client);
+		if (!ret) {
+			device_init_wakeup(dev, true);
+			data->irq = client->irq;
+			dev_dbg(dev, "%s: irq %d used by RTC\n", __func__,
+				client->irq);
+		} else {
+			dev_err(dev, "%s: irq %d unavailable (%d)\n",
+				__func__, client->irq, ret);
+			goto err;
+		}
+	}
+
+	data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops,
+					     THIS_MODULE);
+	ret = PTR_ERR_OR_ZERO(data->rtc);
+	if (ret) {
+		dev_err(dev, "%s: unable to register RTC device (%d)\n",
+			__func__, ret);
+		goto err;
+	}
+
+	/* Enable battery low detection interrupt if battery not already low */
+	if (!data->battery_low && data->irq) {
+		ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true);
+		if (ret) {
+			dev_err(dev, "%s: enabling battery low interrupt "
+				"generation failed (%d)\n", __func__, ret);
+			goto err;
+		}
+	}
+
+err:
+	if (ret && data && data->irq)
+		device_init_wakeup(dev, false);
+	return ret;
+}
+
+static int abb5zes3_remove(struct i2c_client *client)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(&client->dev);
+
+	if (rtc_data->irq > 0)
+		device_init_wakeup(&client->dev, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int abb5zes3_rtc_suspend(struct device *dev)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(rtc_data->irq);
+
+	return 0;
+}
+
+static int abb5zes3_rtc_resume(struct device *dev)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(rtc_data->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(abb5zes3_rtc_pm_ops, abb5zes3_rtc_suspend,
+			 abb5zes3_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id abb5zes3_dt_match[] = {
+	{ .compatible = "abracon,abb5zes3" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, abb5zes3_dt_match);
+#endif
+
+static const struct i2c_device_id abb5zes3_id[] = {
+	{ "abb5zes3", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abb5zes3_id);
+
+static struct i2c_driver abb5zes3_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &abb5zes3_rtc_pm_ops,
+		.of_match_table = of_match_ptr(abb5zes3_dt_match),
+	},
+	.probe	  = abb5zes3_probe,
+	.remove	  = abb5zes3_remove,
+	.id_table = abb5zes3_id,
+};
+module_i2c_driver(abb5zes3_driver);
+
+MODULE_AUTHOR("Arnaud EBALARD <arno@natisbad.org>");
+MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Alarm driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ab3100.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab3100.c
new file mode 100644
index 0000000..9b725c5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab3100.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * RTC clock driver for the AB3100 Analog Baseband Chip
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mfd/abx500.h>
+
+/* Clock rate in Hz */
+#define AB3100_RTC_CLOCK_RATE	32768
+
+/*
+ * The AB3100 RTC registers. These are the same for
+ * AB3000 and AB3100.
+ * Control register:
+ * Bit 0: RTC Monitor cleared=0, active=1, if you set it
+ *        to 1 it remains active until RTC power is lost.
+ * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass
+ * Bit 2: Alarm on, 0 = off, 1 = on
+ * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled
+ */
+#define AB3100_RTC		0x53
+/* default setting, buffer disabled, alarm on */
+#define RTC_SETTING		0x30
+/* Alarm when AL0-AL3 == TI0-TI3  */
+#define AB3100_AL0		0x56
+#define AB3100_AL1		0x57
+#define AB3100_AL2		0x58
+#define AB3100_AL3		0x59
+/* This 48-bit register that counts up at 32768 Hz */
+#define AB3100_TI0		0x5a
+#define AB3100_TI1		0x5b
+#define AB3100_TI2		0x5c
+#define AB3100_TI3		0x5d
+#define AB3100_TI4		0x5e
+#define AB3100_TI5		0x5f
+
+/*
+ * RTC clock functions and device struct declaration
+ */
+static int ab3100_rtc_set_mmss(struct device *dev, time64_t secs)
+{
+	u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
+		     AB3100_TI3, AB3100_TI4, AB3100_TI5};
+	unsigned char buf[6];
+	u64 hw_counter = secs * AB3100_RTC_CLOCK_RATE * 2;
+	int err = 0;
+	int i;
+
+	buf[0] = (hw_counter) & 0xFF;
+	buf[1] = (hw_counter >> 8) & 0xFF;
+	buf[2] = (hw_counter >> 16) & 0xFF;
+	buf[3] = (hw_counter >> 24) & 0xFF;
+	buf[4] = (hw_counter >> 32) & 0xFF;
+	buf[5] = (hw_counter >> 40) & 0xFF;
+
+	for (i = 0; i < 6; i++) {
+		err = abx500_set_register_interruptible(dev, 0,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+
+	/* Set the flag to mark that the clock is now set */
+	return abx500_mask_and_set_register_interruptible(dev, 0,
+							  AB3100_RTC,
+							  0x01, 0x01);
+
+}
+
+static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t time;
+	u8 rtcval;
+	int err;
+
+	err = abx500_get_register_interruptible(dev, 0,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+
+	if (!(rtcval & 0x01)) {
+		dev_info(dev, "clock not set (lost power)");
+		return -EINVAL;
+	} else {
+		u64 hw_counter;
+		u8 buf[6];
+
+		/* Read out time registers */
+		err = abx500_get_register_page_interruptible(dev, 0,
+							     AB3100_TI0,
+							     buf, 6);
+		if (err != 0)
+			return err;
+
+		hw_counter = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) |
+			((u64) buf[3] << 24) | ((u64) buf[2] << 16) |
+			((u64) buf[1] << 8) | (u64) buf[0];
+		time = hw_counter / (u64) (AB3100_RTC_CLOCK_RATE * 2);
+	}
+
+	rtc_time64_to_tm(time, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	time64_t time;
+	u64 hw_counter;
+	u8 buf[6];
+	u8 rtcval;
+	int err;
+
+	/* Figure out if alarm is enabled or not */
+	err = abx500_get_register_interruptible(dev, 0,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+	if (rtcval & 0x04)
+		alarm->enabled = 1;
+	else
+		alarm->enabled = 0;
+	/* No idea how this could be represented */
+	alarm->pending = 0;
+	/* Read out alarm registers, only 4 bytes */
+	err = abx500_get_register_page_interruptible(dev, 0,
+						     AB3100_AL0, buf, 4);
+	if (err)
+		return err;
+	hw_counter = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) |
+		((u64) buf[1] << 24) | ((u64) buf[0] << 16);
+	time = hw_counter / (u64) (AB3100_RTC_CLOCK_RATE * 2);
+
+	rtc_time64_to_tm(time, &alarm->time);
+
+	return rtc_valid_tm(&alarm->time);
+}
+
+static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
+	unsigned char buf[4];
+	time64_t secs;
+	u64 hw_counter;
+	int err;
+	int i;
+
+	secs = rtc_tm_to_time64(&alarm->time);
+	hw_counter = secs * AB3100_RTC_CLOCK_RATE * 2;
+	buf[0] = (hw_counter >> 16) & 0xFF;
+	buf[1] = (hw_counter >> 24) & 0xFF;
+	buf[2] = (hw_counter >> 32) & 0xFF;
+	buf[3] = (hw_counter >> 40) & 0xFF;
+
+	/* Set the alarm */
+	for (i = 0; i < 4; i++) {
+		err = abx500_set_register_interruptible(dev, 0,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+	/* Then enable the alarm */
+	return abx500_mask_and_set_register_interruptible(dev, 0,
+							  AB3100_RTC, (1 << 2),
+							  alarm->enabled << 2);
+}
+
+static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
+{
+	/*
+	 * It's not possible to enable/disable the alarm IRQ for this RTC.
+	 * It does not actually trigger any IRQ: instead its only function is
+	 * to power up the system, if it wasn't on. This will manifest as
+	 * a "power up cause" in the AB3100 power driver (battery charging etc)
+	 * and need to be handled there instead.
+	 */
+	if (enabled)
+		return abx500_mask_and_set_register_interruptible(dev, 0,
+						    AB3100_RTC, (1 << 2),
+						    1 << 2);
+	else
+		return abx500_mask_and_set_register_interruptible(dev, 0,
+						    AB3100_RTC, (1 << 2),
+						    0);
+}
+
+static const struct rtc_class_ops ab3100_rtc_ops = {
+	.read_time	= ab3100_rtc_read_time,
+	.set_mmss64	= ab3100_rtc_set_mmss,
+	.read_alarm	= ab3100_rtc_read_alarm,
+	.set_alarm	= ab3100_rtc_set_alarm,
+	.alarm_irq_enable = ab3100_rtc_irq_enable,
+};
+
+static int __init ab3100_rtc_probe(struct platform_device *pdev)
+{
+	int err;
+	u8 regval;
+	struct rtc_device *rtc;
+
+	/* The first RTC register needs special treatment */
+	err = abx500_get_register_interruptible(&pdev->dev, 0,
+						AB3100_RTC, &regval);
+	if (err) {
+		dev_err(&pdev->dev, "unable to read RTC register\n");
+		return -ENODEV;
+	}
+
+	if ((regval & 0xFE) != RTC_SETTING) {
+		dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n",
+			 regval);
+	}
+
+	if ((regval & 1) == 0) {
+		/*
+		 * Set bit to detect power loss.
+		 * This bit remains until RTC power is lost.
+		 */
+		regval = 1 | RTC_SETTING;
+		err = abx500_set_register_interruptible(&pdev->dev, 0,
+							AB3100_RTC, regval);
+		/* Ignore any error on this write */
+	}
+
+	rtc = devm_rtc_device_register(&pdev->dev, "ab3100-rtc",
+					&ab3100_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		err = PTR_ERR(rtc);
+		return err;
+	}
+	platform_set_drvdata(pdev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver ab3100_rtc_driver = {
+	.driver = {
+		.name = "ab3100-rtc",
+	},
+};
+
+module_platform_driver_probe(ab3100_rtc_driver, ab3100_rtc_probe);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ab8500.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab8500.c
new file mode 100644
index 0000000..24a0af6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ab8500.c
@@ -0,0 +1,538 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
+ *
+ * RTC clock driver for the RTC part of the AB8500 Power management chip.
+ * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
+ * Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/pm_wakeirq.h>
+
+#define AB8500_RTC_SOFF_STAT_REG	0x00
+#define AB8500_RTC_CC_CONF_REG		0x01
+#define AB8500_RTC_READ_REQ_REG		0x02
+#define AB8500_RTC_WATCH_TSECMID_REG	0x03
+#define AB8500_RTC_WATCH_TSECHI_REG	0x04
+#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
+#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
+#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
+#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
+#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
+#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
+#define AB8500_RTC_STAT_REG		0x0B
+#define AB8500_RTC_BKUP_CHG_REG		0x0C
+#define AB8500_RTC_FORCE_BKUP_REG	0x0D
+#define AB8500_RTC_CALIB_REG		0x0E
+#define AB8500_RTC_SWITCH_STAT_REG	0x0F
+#define AB8540_RTC_ALRM_SEC		0x22
+#define AB8540_RTC_ALRM_MIN_LOW_REG	0x23
+#define AB8540_RTC_ALRM_MIN_MID_REG	0x24
+#define AB8540_RTC_ALRM_MIN_HI_REG	0x25
+
+/* RtcReadRequest bits */
+#define RTC_READ_REQUEST		0x01
+#define RTC_WRITE_REQUEST		0x02
+
+/* RtcCtrl bits */
+#define RTC_ALARM_ENA			0x04
+#define RTC_STATUS_DATA			0x01
+
+#define COUNTS_PER_SEC			(0xF000 / 60)
+#define AB8500_RTC_EPOCH		2000
+
+static const u8 ab8500_rtc_time_regs[] = {
+	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
+	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
+	AB8500_RTC_WATCH_TSECMID_REG
+};
+
+static const u8 ab8500_rtc_alarm_regs[] = {
+	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
+	AB8500_RTC_ALRM_MIN_LOW_REG
+};
+
+static const u8 ab8540_rtc_alarm_regs[] = {
+	AB8540_RTC_ALRM_MIN_HI_REG, AB8540_RTC_ALRM_MIN_MID_REG,
+	AB8540_RTC_ALRM_MIN_LOW_REG, AB8540_RTC_ALRM_SEC
+};
+
+/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
+static unsigned long get_elapsed_seconds(int year)
+{
+	unsigned long secs;
+	struct rtc_time tm = {
+		.tm_year = year - 1900,
+		.tm_mday = 1,
+	};
+
+	/*
+	 * This function calculates secs from 1970 and not from
+	 * 1900, even if we supply the offset from year 1900.
+	 */
+	rtc_tm_to_time(&tm, &secs);
+	return secs;
+}
+
+static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long timeout = jiffies + HZ;
+	int retval, i;
+	unsigned long mins, secs;
+	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
+	u8 value;
+
+	/* Request a data read */
+	retval = abx500_set_register_interruptible(dev,
+		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
+	if (retval < 0)
+		return retval;
+
+	/* Wait for some cycles after enabling the rtc read in ab8500 */
+	while (time_before(jiffies, timeout)) {
+		retval = abx500_get_register_interruptible(dev,
+			AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
+		if (retval < 0)
+			return retval;
+
+		if (!(value & RTC_READ_REQUEST))
+			break;
+
+		usleep_range(1000, 5000);
+	}
+
+	/* Read the Watchtime registers */
+	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
+		retval = abx500_get_register_interruptible(dev,
+			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
+		if (retval < 0)
+			return retval;
+		buf[i] = value;
+	}
+
+	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
+
+	secs =	(buf[3] << 8) | buf[4];
+	secs =	secs / COUNTS_PER_SEC;
+	secs =	secs + (mins * 60);
+
+	/* Add back the initially subtracted number of seconds */
+	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+	rtc_time_to_tm(secs, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	int retval, i;
+	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
+	unsigned long no_secs, no_mins, secs = 0;
+
+	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
+		dev_dbg(dev, "year should be equal to or greater than %d\n",
+				AB8500_RTC_EPOCH);
+		return -EINVAL;
+	}
+
+	/* Get the number of seconds since 1970 */
+	rtc_tm_to_time(tm, &secs);
+
+	/*
+	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
+	 * we only have a small counter in the RTC.
+	 */
+	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+	no_mins = secs / 60;
+
+	no_secs = secs % 60;
+	/* Make the seconds count as per the RTC resolution */
+	no_secs = no_secs * COUNTS_PER_SEC;
+
+	buf[4] = no_secs & 0xFF;
+	buf[3] = (no_secs >> 8) & 0xFF;
+
+	buf[2] = no_mins & 0xFF;
+	buf[1] = (no_mins >> 8) & 0xFF;
+	buf[0] = (no_mins >> 16) & 0xFF;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
+		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+			ab8500_rtc_time_regs[i], buf[i]);
+		if (retval < 0)
+			return retval;
+	}
+
+	/* Request a data write */
+	return abx500_set_register_interruptible(dev, AB8500_RTC,
+		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
+}
+
+static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int retval, i;
+	u8 rtc_ctrl, value;
+	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
+	unsigned long secs, mins;
+
+	/* Check if the alarm is enabled or not */
+	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
+		AB8500_RTC_STAT_REG, &rtc_ctrl);
+	if (retval < 0)
+		return retval;
+
+	if (rtc_ctrl & RTC_ALARM_ENA)
+		alarm->enabled = 1;
+	else
+		alarm->enabled = 0;
+
+	alarm->pending = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
+		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
+			ab8500_rtc_alarm_regs[i], &value);
+		if (retval < 0)
+			return retval;
+		buf[i] = value;
+	}
+
+	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
+	secs = mins * 60;
+
+	/* Add back the initially subtracted number of seconds */
+	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+	rtc_time_to_tm(secs, &alarm->time);
+
+	return rtc_valid_tm(&alarm->time);
+}
+
+static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
+{
+	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
+		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
+		enabled ? RTC_ALARM_ENA : 0);
+}
+
+static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int retval, i;
+	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
+	unsigned long mins, secs = 0, cursec = 0;
+	struct rtc_time curtm;
+
+	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
+		dev_dbg(dev, "year should be equal to or greater than %d\n",
+				AB8500_RTC_EPOCH);
+		return -EINVAL;
+	}
+
+	/* Get the number of seconds since 1970 */
+	rtc_tm_to_time(&alarm->time, &secs);
+
+	/*
+	 * Check whether alarm is set less than 1min.
+	 * Since our RTC doesn't support alarm resolution less than 1min,
+	 * return -EINVAL, so UIE EMUL can take it up, incase of UIE_ON
+	 */
+	ab8500_rtc_read_time(dev, &curtm); /* Read current time */
+	rtc_tm_to_time(&curtm, &cursec);
+	if ((secs - cursec) < 59) {
+		dev_dbg(dev, "Alarm less than 1 minute not supported\r\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
+	 * we only have a small counter in the RTC.
+	 */
+	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+	mins = secs / 60;
+
+	buf[2] = mins & 0xFF;
+	buf[1] = (mins >> 8) & 0xFF;
+	buf[0] = (mins >> 16) & 0xFF;
+
+	/* Set the alarm time */
+	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
+		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+			ab8500_rtc_alarm_regs[i], buf[i]);
+		if (retval < 0)
+			return retval;
+	}
+
+	return ab8500_rtc_irq_enable(dev, alarm->enabled);
+}
+
+static int ab8540_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int retval, i;
+	unsigned char buf[ARRAY_SIZE(ab8540_rtc_alarm_regs)];
+	unsigned long mins, secs = 0;
+
+	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
+		dev_dbg(dev, "year should be equal to or greater than %d\n",
+				AB8500_RTC_EPOCH);
+		return -EINVAL;
+	}
+
+	/* Get the number of seconds since 1970 */
+	rtc_tm_to_time(&alarm->time, &secs);
+
+	/*
+	 * Convert it to the number of seconds since 01-01-2000 00:00:00
+	 */
+	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+	mins = secs / 60;
+
+	buf[3] = secs % 60;
+	buf[2] = mins & 0xFF;
+	buf[1] = (mins >> 8) & 0xFF;
+	buf[0] = (mins >> 16) & 0xFF;
+
+	/* Set the alarm time */
+	for (i = 0; i < ARRAY_SIZE(ab8540_rtc_alarm_regs); i++) {
+		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+			ab8540_rtc_alarm_regs[i], buf[i]);
+		if (retval < 0)
+			return retval;
+	}
+
+	return ab8500_rtc_irq_enable(dev, alarm->enabled);
+}
+
+static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
+{
+	int retval;
+	u8  rtccal = 0;
+
+	/*
+	 * Check that the calibration value (which is in units of 0.5
+	 * parts-per-million) is in the AB8500's range for RtcCalibration
+	 * register. -128 (0x80) is not permitted because the AB8500 uses
+	 * a sign-bit rather than two's complement, so 0x80 is just another
+	 * representation of zero.
+	 */
+	if ((calibration < -127) || (calibration > 127)) {
+		dev_err(dev, "RtcCalibration value outside permitted range\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
+	 * so need to convert to this sort of representation before writing
+	 * into RtcCalibration register...
+	 */
+	if (calibration >= 0)
+		rtccal = 0x7F & calibration;
+	else
+		rtccal = ~(calibration - 1) | 0x80;
+
+	retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+			AB8500_RTC_CALIB_REG, rtccal);
+
+	return retval;
+}
+
+static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
+{
+	int retval;
+	u8  rtccal = 0;
+
+	retval =  abx500_get_register_interruptible(dev, AB8500_RTC,
+			AB8500_RTC_CALIB_REG, &rtccal);
+	if (retval >= 0) {
+		/*
+		 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
+		 * so need to convert value from RtcCalibration register into
+		 * a two's complement signed value...
+		 */
+		if (rtccal & 0x80)
+			*calibration = 0 - (rtccal & 0x7F);
+		else
+			*calibration = 0x7F & rtccal;
+	}
+
+	return retval;
+}
+
+static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int retval;
+	int calibration = 0;
+
+	if (sscanf(buf, " %i ", &calibration) != 1) {
+		dev_err(dev, "Failed to store RTC calibration attribute\n");
+		return -EINVAL;
+	}
+
+	retval = ab8500_rtc_set_calibration(dev, calibration);
+
+	return retval ? retval : count;
+}
+
+static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int  retval = 0;
+	int  calibration = 0;
+
+	retval = ab8500_rtc_get_calibration(dev, &calibration);
+	if (retval < 0) {
+		dev_err(dev, "Failed to read RTC calibration attribute\n");
+		sprintf(buf, "0\n");
+		return retval;
+	}
+
+	return sprintf(buf, "%d\n", calibration);
+}
+
+static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
+		   ab8500_sysfs_show_rtc_calibration,
+		   ab8500_sysfs_store_rtc_calibration);
+
+static int ab8500_sysfs_rtc_register(struct device *dev)
+{
+	return device_create_file(dev, &dev_attr_rtc_calibration);
+}
+
+static void ab8500_sysfs_rtc_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_rtc_calibration);
+}
+
+static irqreturn_t rtc_alarm_handler(int irq, void *data)
+{
+	struct rtc_device *rtc = data;
+	unsigned long events = RTC_IRQF | RTC_AF;
+
+	dev_dbg(&rtc->dev, "%s\n", __func__);
+	rtc_update_irq(rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ab8500_rtc_ops = {
+	.read_time		= ab8500_rtc_read_time,
+	.set_time		= ab8500_rtc_set_time,
+	.read_alarm		= ab8500_rtc_read_alarm,
+	.set_alarm		= ab8500_rtc_set_alarm,
+	.alarm_irq_enable	= ab8500_rtc_irq_enable,
+};
+
+static const struct rtc_class_ops ab8540_rtc_ops = {
+	.read_time		= ab8500_rtc_read_time,
+	.set_time		= ab8500_rtc_set_time,
+	.read_alarm		= ab8500_rtc_read_alarm,
+	.set_alarm		= ab8540_rtc_set_alarm,
+	.alarm_irq_enable	= ab8500_rtc_irq_enable,
+};
+
+static const struct platform_device_id ab85xx_rtc_ids[] = {
+	{ "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
+	{ "ab8540-rtc", (kernel_ulong_t)&ab8540_rtc_ops, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab85xx_rtc_ids);
+
+static int ab8500_rtc_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *platid = platform_get_device_id(pdev);
+	int err;
+	struct rtc_device *rtc;
+	u8 rtc_ctrl;
+	int irq;
+
+	irq = platform_get_irq_byname(pdev, "ALARM");
+	if (irq < 0)
+		return irq;
+
+	/* For RTC supply test */
+	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
+		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
+	if (err < 0)
+		return err;
+
+	/* Wait for reset by the PorRtc */
+	usleep_range(1000, 5000);
+
+	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
+		AB8500_RTC_STAT_REG, &rtc_ctrl);
+	if (err < 0)
+		return err;
+
+	/* Check if the RTC Supply fails */
+	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
+		dev_err(&pdev->dev, "RTC supply failure\n");
+		return -ENODEV;
+	}
+
+	device_init_wakeup(&pdev->dev, true);
+
+	rtc = devm_rtc_device_register(&pdev->dev, "ab8500-rtc",
+				(struct rtc_class_ops *)platid->driver_data,
+				THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		dev_err(&pdev->dev, "Registration failed\n");
+		err = PTR_ERR(rtc);
+		return err;
+	}
+
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+			rtc_alarm_handler, IRQF_ONESHOT,
+			"ab8500-rtc", rtc);
+	if (err < 0)
+		return err;
+
+	dev_pm_set_wake_irq(&pdev->dev, irq);
+	platform_set_drvdata(pdev, rtc);
+
+	err = ab8500_sysfs_rtc_register(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "sysfs RTC failed to register\n");
+		return err;
+	}
+
+	rtc->uie_unsupported = 1;
+
+	return 0;
+}
+
+static int ab8500_rtc_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+	ab8500_sysfs_rtc_unregister(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver ab8500_rtc_driver = {
+	.driver = {
+		.name = "ab8500-rtc",
+	},
+	.probe	= ab8500_rtc_probe,
+	.remove = ab8500_rtc_remove,
+	.id_table = ab85xx_rtc_ids,
+};
+
+module_platform_driver(ab8500_rtc_driver);
+
+MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 RTC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-abx80x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-abx80x.c
new file mode 100644
index 0000000..fea9a60
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-abx80x.c
@@ -0,0 +1,691 @@
+/*
+ * A driver for the I2C members of the Abracon AB x8xx RTC family,
+ * and compatible: AB 1805 and AB 0805
+ *
+ * Copyright 2014-2015 Macq S.A.
+ *
+ * Author: Philippe De Muyter <phdm@macqel.be>
+ * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+#define ABX8XX_REG_HTH		0x00
+#define ABX8XX_REG_SC		0x01
+#define ABX8XX_REG_MN		0x02
+#define ABX8XX_REG_HR		0x03
+#define ABX8XX_REG_DA		0x04
+#define ABX8XX_REG_MO		0x05
+#define ABX8XX_REG_YR		0x06
+#define ABX8XX_REG_WD		0x07
+
+#define ABX8XX_REG_AHTH		0x08
+#define ABX8XX_REG_ASC		0x09
+#define ABX8XX_REG_AMN		0x0a
+#define ABX8XX_REG_AHR		0x0b
+#define ABX8XX_REG_ADA		0x0c
+#define ABX8XX_REG_AMO		0x0d
+#define ABX8XX_REG_AWD		0x0e
+
+#define ABX8XX_REG_STATUS	0x0f
+#define ABX8XX_STATUS_AF	BIT(2)
+
+#define ABX8XX_REG_CTRL1	0x10
+#define ABX8XX_CTRL_WRITE	BIT(0)
+#define ABX8XX_CTRL_ARST	BIT(2)
+#define ABX8XX_CTRL_12_24	BIT(6)
+
+#define ABX8XX_REG_IRQ		0x12
+#define ABX8XX_IRQ_AIE		BIT(2)
+#define ABX8XX_IRQ_IM_1_4	(0x3 << 5)
+
+#define ABX8XX_REG_CD_TIMER_CTL	0x18
+
+#define ABX8XX_REG_OSC		0x1c
+#define ABX8XX_OSC_FOS		BIT(3)
+#define ABX8XX_OSC_BOS		BIT(4)
+#define ABX8XX_OSC_ACAL_512	BIT(5)
+#define ABX8XX_OSC_ACAL_1024	BIT(6)
+
+#define ABX8XX_OSC_OSEL		BIT(7)
+
+#define ABX8XX_REG_OSS		0x1d
+#define ABX8XX_OSS_OF		BIT(1)
+#define ABX8XX_OSS_OMODE	BIT(4)
+
+#define ABX8XX_REG_CFG_KEY	0x1f
+#define ABX8XX_CFG_KEY_OSC	0xa1
+#define ABX8XX_CFG_KEY_MISC	0x9d
+
+#define ABX8XX_REG_ID0		0x28
+
+#define ABX8XX_REG_TRICKLE	0x20
+#define ABX8XX_TRICKLE_CHARGE_ENABLE	0xa0
+#define ABX8XX_TRICKLE_STANDARD_DIODE	0x8
+#define ABX8XX_TRICKLE_SCHOTTKY_DIODE	0x4
+
+static u8 trickle_resistors[] = {0, 3, 6, 11};
+
+enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
+	AB1801, AB1803, AB1804, AB1805, ABX80X};
+
+struct abx80x_cap {
+	u16 pn;
+	bool has_tc;
+};
+
+static struct abx80x_cap abx80x_caps[] = {
+	[AB0801] = {.pn = 0x0801},
+	[AB0803] = {.pn = 0x0803},
+	[AB0804] = {.pn = 0x0804, .has_tc = true},
+	[AB0805] = {.pn = 0x0805, .has_tc = true},
+	[AB1801] = {.pn = 0x1801},
+	[AB1803] = {.pn = 0x1803},
+	[AB1804] = {.pn = 0x1804, .has_tc = true},
+	[AB1805] = {.pn = 0x1805, .has_tc = true},
+	[ABX80X] = {.pn = 0}
+};
+
+static int abx80x_is_rc_mode(struct i2c_client *client)
+{
+	int flags = 0;
+
+	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+	if (flags < 0) {
+		dev_err(&client->dev,
+			"Failed to read autocalibration attribute\n");
+		return flags;
+	}
+
+	return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
+}
+
+static int abx80x_enable_trickle_charger(struct i2c_client *client,
+					 u8 trickle_cfg)
+{
+	int err;
+
+	/*
+	 * Write the configuration key register to enable access to the Trickle
+	 * register
+	 */
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+					ABX8XX_CFG_KEY_MISC);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write configuration key\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE,
+					ABX8XX_TRICKLE_CHARGE_ENABLE |
+					trickle_cfg);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write trickle register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[8];
+	int err, flags, rc_mode = 0;
+
+	/* Read the Oscillator Failure only in XT mode */
+	rc_mode = abx80x_is_rc_mode(client);
+	if (rc_mode < 0)
+		return rc_mode;
+
+	if (!rc_mode) {
+		flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+		if (flags < 0)
+			return flags;
+
+		if (flags & ABX8XX_OSS_OF) {
+			dev_err(dev, "Oscillator failure, data is invalid.\n");
+			return -EINVAL;
+		}
+	}
+
+	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to read date\n");
+		return -EIO;
+	}
+
+	tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F);
+	tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7;
+	tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F);
+	tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100;
+
+	err = rtc_valid_tm(tm);
+	if (err < 0)
+		dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+	return err;
+}
+
+static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[8];
+	int err, flags;
+
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	buf[ABX8XX_REG_HTH] = 0;
+	buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min);
+	buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour);
+	buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday);
+	buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1);
+	buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100);
+	buf[ABX8XX_REG_WD] = tm->tm_wday;
+
+	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
+					     sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write to date registers\n");
+		return -EIO;
+	}
+
+	/* Clear the OF bit of Oscillator Status Register */
+	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+	if (flags < 0)
+		return flags;
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
+					flags & ~ABX8XX_OSS_OF);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write oscillator status register\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct rtc_device *rtc = i2c_get_clientdata(client);
+	int status;
+
+	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
+	if (status < 0)
+		return IRQ_NONE;
+
+	if (status & ABX8XX_STATUS_AF)
+		rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+
+	i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[7];
+
+	int irq_mask, err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,
+					    sizeof(buf), buf);
+	if (err)
+		return err;
+
+	irq_mask = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
+	if (irq_mask < 0)
+		return irq_mask;
+
+	t->time.tm_sec = bcd2bin(buf[0] & 0x7F);
+	t->time.tm_min = bcd2bin(buf[1] & 0x7F);
+	t->time.tm_hour = bcd2bin(buf[2] & 0x3F);
+	t->time.tm_mday = bcd2bin(buf[3] & 0x3F);
+	t->time.tm_mon = bcd2bin(buf[4] & 0x1F) - 1;
+	t->time.tm_wday = buf[5] & 0x7;
+
+	t->enabled = !!(irq_mask & ABX8XX_IRQ_AIE);
+	t->pending = (buf[6] & ABX8XX_STATUS_AF) && t->enabled;
+
+	return err;
+}
+
+static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 alarm[6];
+	int err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	alarm[0] = 0x0;
+	alarm[1] = bin2bcd(t->time.tm_sec);
+	alarm[2] = bin2bcd(t->time.tm_min);
+	alarm[3] = bin2bcd(t->time.tm_hour);
+	alarm[4] = bin2bcd(t->time.tm_mday);
+	alarm[5] = bin2bcd(t->time.tm_mon + 1);
+
+	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_AHTH,
+					     sizeof(alarm), alarm);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write alarm registers\n");
+		return -EIO;
+	}
+
+	if (t->enabled) {
+		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
+						(ABX8XX_IRQ_IM_1_4 |
+						 ABX8XX_IRQ_AIE));
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int abx80x_rtc_set_autocalibration(struct device *dev,
+					  int autocalibration)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int retval, flags = 0;
+
+	if ((autocalibration != 0) && (autocalibration != 1024) &&
+	    (autocalibration != 512)) {
+		dev_err(dev, "autocalibration value outside permitted range\n");
+		return -EINVAL;
+	}
+
+	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+	if (flags < 0)
+		return flags;
+
+	if (autocalibration == 0) {
+		flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
+	} else if (autocalibration == 1024) {
+		/* 1024 autocalibration is 0x10 */
+		flags |= ABX8XX_OSC_ACAL_1024;
+		flags &= ~(ABX8XX_OSC_ACAL_512);
+	} else {
+		/* 512 autocalibration is 0x11 */
+		flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
+	}
+
+	/* Unlock write access to Oscillator Control Register */
+	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+					   ABX8XX_CFG_KEY_OSC);
+	if (retval < 0) {
+		dev_err(dev, "Failed to write CONFIG_KEY register\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+
+	return retval;
+}
+
+static int abx80x_rtc_get_autocalibration(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int flags = 0, autocalibration;
+
+	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+	if (flags < 0)
+		return flags;
+
+	if (flags & ABX8XX_OSC_ACAL_512)
+		autocalibration = 512;
+	else if (flags & ABX8XX_OSC_ACAL_1024)
+		autocalibration = 1024;
+	else
+		autocalibration = 0;
+
+	return autocalibration;
+}
+
+static ssize_t autocalibration_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	int retval;
+	unsigned long autocalibration = 0;
+
+	retval = kstrtoul(buf, 10, &autocalibration);
+	if (retval < 0) {
+		dev_err(dev, "Failed to store RTC autocalibration attribute\n");
+		return -EINVAL;
+	}
+
+	retval = abx80x_rtc_set_autocalibration(dev, autocalibration);
+
+	return retval ? retval : count;
+}
+
+static ssize_t autocalibration_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	int autocalibration = 0;
+
+	autocalibration = abx80x_rtc_get_autocalibration(dev);
+	if (autocalibration < 0) {
+		dev_err(dev, "Failed to read RTC autocalibration\n");
+		sprintf(buf, "0\n");
+		return autocalibration;
+	}
+
+	return sprintf(buf, "%d\n", autocalibration);
+}
+
+static DEVICE_ATTR_RW(autocalibration);
+
+static ssize_t oscillator_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int retval, flags, rc_mode = 0;
+
+	if (strncmp(buf, "rc", 2) == 0) {
+		rc_mode = 1;
+	} else if (strncmp(buf, "xtal", 4) == 0) {
+		rc_mode = 0;
+	} else {
+		dev_err(dev, "Oscillator selection value outside permitted ones\n");
+		return -EINVAL;
+	}
+
+	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+	if (flags < 0)
+		return flags;
+
+	if (rc_mode == 0)
+		flags &= ~(ABX8XX_OSC_OSEL);
+	else
+		flags |= (ABX8XX_OSC_OSEL);
+
+	/* Unlock write access on Oscillator Control register */
+	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+					   ABX8XX_CFG_KEY_OSC);
+	if (retval < 0) {
+		dev_err(dev, "Failed to write CONFIG_KEY register\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+	if (retval < 0) {
+		dev_err(dev, "Failed to write Oscillator Control register\n");
+		return retval;
+	}
+
+	return retval ? retval : count;
+}
+
+static ssize_t oscillator_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	int rc_mode = 0;
+	struct i2c_client *client = to_i2c_client(dev);
+
+	rc_mode = abx80x_is_rc_mode(client);
+
+	if (rc_mode < 0) {
+		dev_err(dev, "Failed to read RTC oscillator selection\n");
+		sprintf(buf, "\n");
+		return rc_mode;
+	}
+
+	if (rc_mode)
+		return sprintf(buf, "rc\n");
+	else
+		return sprintf(buf, "xtal\n");
+}
+
+static DEVICE_ATTR_RW(oscillator);
+
+static struct attribute *rtc_calib_attrs[] = {
+	&dev_attr_autocalibration.attr,
+	&dev_attr_oscillator.attr,
+	NULL,
+};
+
+static const struct attribute_group rtc_calib_attr_group = {
+	.attrs		= rtc_calib_attrs,
+};
+
+static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int err;
+
+	if (enabled)
+		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
+						(ABX8XX_IRQ_IM_1_4 |
+						 ABX8XX_IRQ_AIE));
+	else
+		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
+						ABX8XX_IRQ_IM_1_4);
+	return err;
+}
+
+static const struct rtc_class_ops abx80x_rtc_ops = {
+	.read_time	= abx80x_rtc_read_time,
+	.set_time	= abx80x_rtc_set_time,
+	.read_alarm	= abx80x_read_alarm,
+	.set_alarm	= abx80x_set_alarm,
+	.alarm_irq_enable = abx80x_alarm_irq_enable,
+};
+
+static int abx80x_dt_trickle_cfg(struct device_node *np)
+{
+	const char *diode;
+	int trickle_cfg = 0;
+	int i, ret;
+	u32 tmp;
+
+	ret = of_property_read_string(np, "abracon,tc-diode", &diode);
+	if (ret)
+		return ret;
+
+	if (!strcmp(diode, "standard"))
+		trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE;
+	else if (!strcmp(diode, "schottky"))
+		trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < sizeof(trickle_resistors); i++)
+		if (trickle_resistors[i] == tmp)
+			break;
+
+	if (i == sizeof(trickle_resistors))
+		return -EINVAL;
+
+	return (trickle_cfg | i);
+}
+
+static void rtc_calib_remove_sysfs_group(void *_dev)
+{
+	struct device *dev = _dev;
+
+	sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
+}
+
+static int abx80x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct rtc_device *rtc;
+	int i, data, err, trickle_cfg = -EINVAL;
+	char buf[7];
+	unsigned int part = id->driver_data;
+	unsigned int partnumber;
+	unsigned int majrev, minrev;
+	unsigned int lot;
+	unsigned int wafer;
+	unsigned int uid;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to read partnumber\n");
+		return -EIO;
+	}
+
+	partnumber = (buf[0] << 8) | buf[1];
+	majrev = buf[2] >> 3;
+	minrev = buf[2] & 0x7;
+	lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
+	uid = ((buf[4] & 0x7f) << 8) | buf[5];
+	wafer = (buf[6] & 0x7c) >> 2;
+	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+		 partnumber, majrev, minrev, lot, wafer, uid);
+
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1,
+					((data & ~(ABX8XX_CTRL_12_24 |
+						   ABX8XX_CTRL_ARST)) |
+					 ABX8XX_CTRL_WRITE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	/* part autodetection */
+	if (part == ABX80X) {
+		for (i = 0; abx80x_caps[i].pn; i++)
+			if (partnumber == abx80x_caps[i].pn)
+				break;
+		if (abx80x_caps[i].pn == 0) {
+			dev_err(&client->dev, "Unknown part: %04x\n",
+				partnumber);
+			return -EINVAL;
+		}
+		part = i;
+	}
+
+	if (partnumber != abx80x_caps[part].pn) {
+		dev_err(&client->dev, "partnumber mismatch %04x != %04x\n",
+			partnumber, abx80x_caps[part].pn);
+		return -EINVAL;
+	}
+
+	if (np && abx80x_caps[part].has_tc)
+		trickle_cfg = abx80x_dt_trickle_cfg(np);
+
+	if (trickle_cfg > 0) {
+		dev_info(&client->dev, "Enabling trickle charger: %02x\n",
+			 trickle_cfg);
+		abx80x_enable_trickle_charger(client, trickle_cfg);
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CD_TIMER_CTL,
+					BIT(2));
+	if (err)
+		return err;
+
+	rtc = devm_rtc_device_register(&client->dev, "abx8xx",
+				       &abx80x_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	if (client->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
+		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+						abx80x_handle_irq,
+						IRQF_SHARED | IRQF_ONESHOT,
+						"abx8xx",
+						client);
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
+			client->irq = 0;
+		}
+	}
+
+	/* Export sysfs entries */
+	err = sysfs_create_group(&(&client->dev)->kobj, &rtc_calib_attr_group);
+	if (err) {
+		dev_err(&client->dev, "Failed to create sysfs group: %d\n",
+			err);
+		return err;
+	}
+
+	err = devm_add_action_or_reset(&client->dev,
+				       rtc_calib_remove_sysfs_group,
+				       &client->dev);
+	if (err)
+		dev_err(&client->dev,
+			"Failed to add sysfs cleanup action: %d\n",
+			err);
+
+	return err;
+}
+
+static int abx80x_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static const struct i2c_device_id abx80x_id[] = {
+	{ "abx80x", ABX80X },
+	{ "ab0801", AB0801 },
+	{ "ab0803", AB0803 },
+	{ "ab0804", AB0804 },
+	{ "ab0805", AB0805 },
+	{ "ab1801", AB1801 },
+	{ "ab1803", AB1803 },
+	{ "ab1804", AB1804 },
+	{ "ab1805", AB1805 },
+	{ "rv1805", AB1805 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
+static struct i2c_driver abx80x_driver = {
+	.driver		= {
+		.name	= "rtc-abx80x",
+	},
+	.probe		= abx80x_probe,
+	.remove		= abx80x_remove,
+	.id_table	= abx80x_id,
+};
+
+module_i2c_driver(abx80x_driver);
+
+MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Abracon ABX80X RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ac100.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ac100.c
new file mode 100644
index 0000000..8ff9dc3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ac100.c
@@ -0,0 +1,639 @@
+/*
+ * RTC Driver for X-Powers AC100
+ *
+ * Copyright (c) 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/ac100.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+/* Control register */
+#define AC100_RTC_CTRL_24HOUR	BIT(0)
+
+/* Clock output register bits */
+#define AC100_CLKOUT_PRE_DIV_SHIFT	5
+#define AC100_CLKOUT_PRE_DIV_WIDTH	3
+#define AC100_CLKOUT_MUX_SHIFT		4
+#define AC100_CLKOUT_MUX_WIDTH		1
+#define AC100_CLKOUT_DIV_SHIFT		1
+#define AC100_CLKOUT_DIV_WIDTH		3
+#define AC100_CLKOUT_EN			BIT(0)
+
+/* RTC */
+#define AC100_RTC_SEC_MASK	GENMASK(6, 0)
+#define AC100_RTC_MIN_MASK	GENMASK(6, 0)
+#define AC100_RTC_HOU_MASK	GENMASK(5, 0)
+#define AC100_RTC_WEE_MASK	GENMASK(2, 0)
+#define AC100_RTC_DAY_MASK	GENMASK(5, 0)
+#define AC100_RTC_MON_MASK	GENMASK(4, 0)
+#define AC100_RTC_YEA_MASK	GENMASK(7, 0)
+#define AC100_RTC_YEA_LEAP	BIT(15)
+#define AC100_RTC_UPD_TRIGGER	BIT(15)
+
+/* Alarm (wall clock) */
+#define AC100_ALM_INT_ENABLE	BIT(0)
+
+#define AC100_ALM_SEC_MASK	GENMASK(6, 0)
+#define AC100_ALM_MIN_MASK	GENMASK(6, 0)
+#define AC100_ALM_HOU_MASK	GENMASK(5, 0)
+#define AC100_ALM_WEE_MASK	GENMASK(2, 0)
+#define AC100_ALM_DAY_MASK	GENMASK(5, 0)
+#define AC100_ALM_MON_MASK	GENMASK(4, 0)
+#define AC100_ALM_YEA_MASK	GENMASK(7, 0)
+#define AC100_ALM_ENABLE_FLAG	BIT(15)
+#define AC100_ALM_UPD_TRIGGER	BIT(15)
+
+/*
+ * The year parameter passed to the driver is usually an offset relative to
+ * the year 1900. This macro is used to convert this offset to another one
+ * relative to the minimum year allowed by the hardware.
+ *
+ * The year range is 1970 - 2069. This range is selected to match Allwinner's
+ * driver.
+ */
+#define AC100_YEAR_MIN				1970
+#define AC100_YEAR_MAX				2069
+#define AC100_YEAR_OFF				(AC100_YEAR_MIN - 1900)
+
+struct ac100_clkout {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u8 offset;
+};
+
+#define to_ac100_clkout(_hw) container_of(_hw, struct ac100_clkout, hw)
+
+#define AC100_RTC_32K_NAME	"ac100-rtc-32k"
+#define AC100_RTC_32K_RATE	32768
+#define AC100_CLKOUT_NUM	3
+
+static const char * const ac100_clkout_names[AC100_CLKOUT_NUM] = {
+	"ac100-cko1-rtc",
+	"ac100-cko2-rtc",
+	"ac100-cko3-rtc",
+};
+
+struct ac100_rtc_dev {
+	struct rtc_device *rtc;
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+	unsigned long alarm;
+
+	struct clk_hw *rtc_32k_clk;
+	struct ac100_clkout clks[AC100_CLKOUT_NUM];
+	struct clk_hw_onecell_data *clk_data;
+};
+
+/**
+ * Clock controls for 3 clock output pins
+ */
+
+static const struct clk_div_table ac100_clkout_prediv[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ .val = 4, .div = 16 },
+	{ .val = 5, .div = 32 },
+	{ .val = 6, .div = 64 },
+	{ .val = 7, .div = 122 },
+	{ },
+};
+
+/* Abuse the fact that one parent is 32768 Hz, and the other is 4 MHz */
+static unsigned long ac100_clkout_recalc_rate(struct clk_hw *hw,
+					      unsigned long prate)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+	unsigned int reg, div;
+
+	regmap_read(clk->regmap, clk->offset, &reg);
+
+	/* Handle pre-divider first */
+	if (prate != AC100_RTC_32K_RATE) {
+		div = (reg >> AC100_CLKOUT_PRE_DIV_SHIFT) &
+			((1 << AC100_CLKOUT_PRE_DIV_WIDTH) - 1);
+		prate = divider_recalc_rate(hw, prate, div,
+					    ac100_clkout_prediv, 0,
+					    AC100_CLKOUT_PRE_DIV_WIDTH);
+	}
+
+	div = (reg >> AC100_CLKOUT_DIV_SHIFT) &
+		(BIT(AC100_CLKOUT_DIV_WIDTH) - 1);
+	return divider_recalc_rate(hw, prate, div, NULL,
+				   CLK_DIVIDER_POWER_OF_TWO,
+				   AC100_CLKOUT_DIV_WIDTH);
+}
+
+static long ac100_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long prate)
+{
+	unsigned long best_rate = 0, tmp_rate, tmp_prate;
+	int i;
+
+	if (prate == AC100_RTC_32K_RATE)
+		return divider_round_rate(hw, rate, &prate, NULL,
+					  AC100_CLKOUT_DIV_WIDTH,
+					  CLK_DIVIDER_POWER_OF_TWO);
+
+	for (i = 0; ac100_clkout_prediv[i].div; i++) {
+		tmp_prate = DIV_ROUND_UP(prate, ac100_clkout_prediv[i].val);
+		tmp_rate = divider_round_rate(hw, rate, &tmp_prate, NULL,
+					      AC100_CLKOUT_DIV_WIDTH,
+					      CLK_DIVIDER_POWER_OF_TWO);
+
+		if (tmp_rate > rate)
+			continue;
+		if (rate - tmp_rate < best_rate - tmp_rate)
+			best_rate = tmp_rate;
+	}
+
+	return best_rate;
+}
+
+static int ac100_clkout_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req)
+{
+	struct clk_hw *best_parent;
+	unsigned long best = 0;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+
+	for (i = 0; i < num_parents; i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long tmp, prate = clk_hw_get_rate(parent);
+
+		tmp = ac100_clkout_round_rate(hw, req->rate, prate);
+
+		if (tmp > req->rate)
+			continue;
+		if (req->rate - tmp < req->rate - best) {
+			best = tmp;
+			best_parent = parent;
+		}
+	}
+
+	if (!best)
+		return -EINVAL;
+
+	req->best_parent_hw = best_parent;
+	req->best_parent_rate = best;
+	req->rate = best;
+
+	return 0;
+}
+
+static int ac100_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long prate)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+	int div = 0, pre_div = 0;
+
+	do {
+		div = divider_get_val(rate * ac100_clkout_prediv[pre_div].div,
+				      prate, NULL, AC100_CLKOUT_DIV_WIDTH,
+				      CLK_DIVIDER_POWER_OF_TWO);
+		if (div >= 0)
+			break;
+	} while (prate != AC100_RTC_32K_RATE &&
+		 ac100_clkout_prediv[++pre_div].div);
+
+	if (div < 0)
+		return div;
+
+	pre_div = ac100_clkout_prediv[pre_div].val;
+
+	regmap_update_bits(clk->regmap, clk->offset,
+			   ((1 << AC100_CLKOUT_DIV_WIDTH) - 1) << AC100_CLKOUT_DIV_SHIFT |
+			   ((1 << AC100_CLKOUT_PRE_DIV_WIDTH) - 1) << AC100_CLKOUT_PRE_DIV_SHIFT,
+			   (div - 1) << AC100_CLKOUT_DIV_SHIFT |
+			   (pre_div - 1) << AC100_CLKOUT_PRE_DIV_SHIFT);
+
+	return 0;
+}
+
+static int ac100_clkout_prepare(struct clk_hw *hw)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+
+	return regmap_update_bits(clk->regmap, clk->offset, AC100_CLKOUT_EN,
+				  AC100_CLKOUT_EN);
+}
+
+static void ac100_clkout_unprepare(struct clk_hw *hw)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+
+	regmap_update_bits(clk->regmap, clk->offset, AC100_CLKOUT_EN, 0);
+}
+
+static int ac100_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+	unsigned int reg;
+
+	regmap_read(clk->regmap, clk->offset, &reg);
+
+	return reg & AC100_CLKOUT_EN;
+}
+
+static u8 ac100_clkout_get_parent(struct clk_hw *hw)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+	unsigned int reg;
+
+	regmap_read(clk->regmap, clk->offset, &reg);
+
+	return (reg >> AC100_CLKOUT_MUX_SHIFT) & 0x1;
+}
+
+static int ac100_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct ac100_clkout *clk = to_ac100_clkout(hw);
+
+	return regmap_update_bits(clk->regmap, clk->offset,
+				  BIT(AC100_CLKOUT_MUX_SHIFT),
+				  index ? BIT(AC100_CLKOUT_MUX_SHIFT) : 0);
+}
+
+static const struct clk_ops ac100_clkout_ops = {
+	.prepare	= ac100_clkout_prepare,
+	.unprepare	= ac100_clkout_unprepare,
+	.is_prepared	= ac100_clkout_is_prepared,
+	.recalc_rate	= ac100_clkout_recalc_rate,
+	.determine_rate	= ac100_clkout_determine_rate,
+	.get_parent	= ac100_clkout_get_parent,
+	.set_parent	= ac100_clkout_set_parent,
+	.set_rate	= ac100_clkout_set_rate,
+};
+
+static int ac100_rtc_register_clks(struct ac100_rtc_dev *chip)
+{
+	struct device_node *np = chip->dev->of_node;
+	const char *parents[2] = {AC100_RTC_32K_NAME};
+	int i, ret;
+
+	chip->clk_data = devm_kzalloc(chip->dev, sizeof(*chip->clk_data) +
+						 sizeof(*chip->clk_data->hws) *
+						 AC100_CLKOUT_NUM,
+						 GFP_KERNEL);
+	if (!chip->clk_data)
+		return -ENOMEM;
+
+	chip->rtc_32k_clk = clk_hw_register_fixed_rate(chip->dev,
+						       AC100_RTC_32K_NAME,
+						       NULL, 0,
+						       AC100_RTC_32K_RATE);
+	if (IS_ERR(chip->rtc_32k_clk)) {
+		ret = PTR_ERR(chip->rtc_32k_clk);
+		dev_err(chip->dev, "Failed to register RTC-32k clock: %d\n",
+			ret);
+		return ret;
+	}
+
+	parents[1] = of_clk_get_parent_name(np, 0);
+	if (!parents[1]) {
+		dev_err(chip->dev, "Failed to get ADDA 4M clock\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < AC100_CLKOUT_NUM; i++) {
+		struct ac100_clkout *clk = &chip->clks[i];
+		struct clk_init_data init = {
+			.name = ac100_clkout_names[i],
+			.ops = &ac100_clkout_ops,
+			.parent_names = parents,
+			.num_parents = ARRAY_SIZE(parents),
+			.flags = 0,
+		};
+
+		of_property_read_string_index(np, "clock-output-names",
+					      i, &init.name);
+		clk->regmap = chip->regmap;
+		clk->offset = AC100_CLKOUT_CTRL1 + i;
+		clk->hw.init = &init;
+
+		ret = devm_clk_hw_register(chip->dev, &clk->hw);
+		if (ret) {
+			dev_err(chip->dev, "Failed to register clk '%s': %d\n",
+				init.name, ret);
+			goto err_unregister_rtc_32k;
+		}
+
+		chip->clk_data->hws[i] = &clk->hw;
+	}
+
+	chip->clk_data->num = i;
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, chip->clk_data);
+	if (ret)
+		goto err_unregister_rtc_32k;
+
+	return 0;
+
+err_unregister_rtc_32k:
+	clk_unregister_fixed_rate(chip->rtc_32k_clk->clk);
+
+	return ret;
+}
+
+static void ac100_rtc_unregister_clks(struct ac100_rtc_dev *chip)
+{
+	of_clk_del_provider(chip->dev->of_node);
+	clk_unregister_fixed_rate(chip->rtc_32k_clk->clk);
+}
+
+/**
+ * RTC related bits
+ */
+static int ac100_rtc_get_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct ac100_rtc_dev *chip = dev_get_drvdata(dev);
+	struct regmap *regmap = chip->regmap;
+	u16 reg[7];
+	int ret;
+
+	ret = regmap_bulk_read(regmap, AC100_RTC_SEC, reg, 7);
+	if (ret)
+		return ret;
+
+	rtc_tm->tm_sec  = bcd2bin(reg[0] & AC100_RTC_SEC_MASK);
+	rtc_tm->tm_min  = bcd2bin(reg[1] & AC100_RTC_MIN_MASK);
+	rtc_tm->tm_hour = bcd2bin(reg[2] & AC100_RTC_HOU_MASK);
+	rtc_tm->tm_wday = bcd2bin(reg[3] & AC100_RTC_WEE_MASK);
+	rtc_tm->tm_mday = bcd2bin(reg[4] & AC100_RTC_DAY_MASK);
+	rtc_tm->tm_mon  = bcd2bin(reg[5] & AC100_RTC_MON_MASK) - 1;
+	rtc_tm->tm_year = bcd2bin(reg[6] & AC100_RTC_YEA_MASK) +
+			  AC100_YEAR_OFF;
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int ac100_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct ac100_rtc_dev *chip = dev_get_drvdata(dev);
+	struct regmap *regmap = chip->regmap;
+	int year;
+	u16 reg[8];
+
+	/* our RTC has a limited year range... */
+	year = rtc_tm->tm_year - AC100_YEAR_OFF;
+	if (year < 0 || year > (AC100_YEAR_MAX - 1900)) {
+		dev_err(dev, "rtc only supports year in range %d - %d\n",
+			AC100_YEAR_MIN, AC100_YEAR_MAX);
+		return -EINVAL;
+	}
+
+	/* convert to BCD */
+	reg[0] = bin2bcd(rtc_tm->tm_sec)     & AC100_RTC_SEC_MASK;
+	reg[1] = bin2bcd(rtc_tm->tm_min)     & AC100_RTC_MIN_MASK;
+	reg[2] = bin2bcd(rtc_tm->tm_hour)    & AC100_RTC_HOU_MASK;
+	reg[3] = bin2bcd(rtc_tm->tm_wday)    & AC100_RTC_WEE_MASK;
+	reg[4] = bin2bcd(rtc_tm->tm_mday)    & AC100_RTC_DAY_MASK;
+	reg[5] = bin2bcd(rtc_tm->tm_mon + 1) & AC100_RTC_MON_MASK;
+	reg[6] = bin2bcd(year)		     & AC100_RTC_YEA_MASK;
+	/* trigger write */
+	reg[7] = AC100_RTC_UPD_TRIGGER;
+
+	/* Is it a leap year? */
+	if (is_leap_year(year + AC100_YEAR_OFF + 1900))
+		reg[6] |= AC100_RTC_YEA_LEAP;
+
+	return regmap_bulk_write(regmap, AC100_RTC_SEC, reg, 8);
+}
+
+static int ac100_rtc_alarm_irq_enable(struct device *dev, unsigned int en)
+{
+	struct ac100_rtc_dev *chip = dev_get_drvdata(dev);
+	struct regmap *regmap = chip->regmap;
+	unsigned int val;
+
+	val = en ? AC100_ALM_INT_ENABLE : 0;
+
+	return regmap_write(regmap, AC100_ALM_INT_ENA, val);
+}
+
+static int ac100_rtc_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct ac100_rtc_dev *chip = dev_get_drvdata(dev);
+	struct regmap *regmap = chip->regmap;
+	struct rtc_time *alrm_tm = &alrm->time;
+	u16 reg[7];
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, AC100_ALM_INT_ENA, &val);
+	if (ret)
+		return ret;
+
+	alrm->enabled = !!(val & AC100_ALM_INT_ENABLE);
+
+	ret = regmap_bulk_read(regmap, AC100_ALM_SEC, reg, 7);
+	if (ret)
+		return ret;
+
+	alrm_tm->tm_sec  = bcd2bin(reg[0] & AC100_ALM_SEC_MASK);
+	alrm_tm->tm_min  = bcd2bin(reg[1] & AC100_ALM_MIN_MASK);
+	alrm_tm->tm_hour = bcd2bin(reg[2] & AC100_ALM_HOU_MASK);
+	alrm_tm->tm_wday = bcd2bin(reg[3] & AC100_ALM_WEE_MASK);
+	alrm_tm->tm_mday = bcd2bin(reg[4] & AC100_ALM_DAY_MASK);
+	alrm_tm->tm_mon  = bcd2bin(reg[5] & AC100_ALM_MON_MASK) - 1;
+	alrm_tm->tm_year = bcd2bin(reg[6] & AC100_ALM_YEA_MASK) +
+			   AC100_YEAR_OFF;
+
+	return 0;
+}
+
+static int ac100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct ac100_rtc_dev *chip = dev_get_drvdata(dev);
+	struct regmap *regmap = chip->regmap;
+	struct rtc_time *alrm_tm = &alrm->time;
+	u16 reg[8];
+	int year;
+	int ret;
+
+	/* our alarm has a limited year range... */
+	year = alrm_tm->tm_year - AC100_YEAR_OFF;
+	if (year < 0 || year > (AC100_YEAR_MAX - 1900)) {
+		dev_err(dev, "alarm only supports year in range %d - %d\n",
+			AC100_YEAR_MIN, AC100_YEAR_MAX);
+		return -EINVAL;
+	}
+
+	/* convert to BCD */
+	reg[0] = (bin2bcd(alrm_tm->tm_sec)  & AC100_ALM_SEC_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	reg[1] = (bin2bcd(alrm_tm->tm_min)  & AC100_ALM_MIN_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	reg[2] = (bin2bcd(alrm_tm->tm_hour) & AC100_ALM_HOU_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	/* Do not enable weekday alarm */
+	reg[3] = bin2bcd(alrm_tm->tm_wday) & AC100_ALM_WEE_MASK;
+	reg[4] = (bin2bcd(alrm_tm->tm_mday) & AC100_ALM_DAY_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	reg[5] = (bin2bcd(alrm_tm->tm_mon + 1)  & AC100_ALM_MON_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	reg[6] = (bin2bcd(year) & AC100_ALM_YEA_MASK) |
+			AC100_ALM_ENABLE_FLAG;
+	/* trigger write */
+	reg[7] = AC100_ALM_UPD_TRIGGER;
+
+	ret = regmap_bulk_write(regmap, AC100_ALM_SEC, reg, 8);
+	if (ret)
+		return ret;
+
+	return ac100_rtc_alarm_irq_enable(dev, alrm->enabled);
+}
+
+static irqreturn_t ac100_rtc_irq(int irq, void *data)
+{
+	struct ac100_rtc_dev *chip = data;
+	struct regmap *regmap = chip->regmap;
+	unsigned int val = 0;
+	int ret;
+
+	mutex_lock(&chip->rtc->ops_lock);
+
+	/* read status */
+	ret = regmap_read(regmap, AC100_ALM_INT_STA, &val);
+	if (ret)
+		goto out;
+
+	if (val & AC100_ALM_INT_ENABLE) {
+		/* signal rtc framework */
+		rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
+
+		/* clear status */
+		ret = regmap_write(regmap, AC100_ALM_INT_STA, val);
+		if (ret)
+			goto out;
+
+		/* disable interrupt */
+		ret = ac100_rtc_alarm_irq_enable(chip->dev, 0);
+		if (ret)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&chip->rtc->ops_lock);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ac100_rtc_ops = {
+	.read_time	  = ac100_rtc_get_time,
+	.set_time	  = ac100_rtc_set_time,
+	.read_alarm	  = ac100_rtc_get_alarm,
+	.set_alarm	  = ac100_rtc_set_alarm,
+	.alarm_irq_enable = ac100_rtc_alarm_irq_enable,
+};
+
+static int ac100_rtc_probe(struct platform_device *pdev)
+{
+	struct ac100_dev *ac100 = dev_get_drvdata(pdev->dev.parent);
+	struct ac100_rtc_dev *chip;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chip);
+	chip->dev = &pdev->dev;
+	chip->regmap = ac100->regmap;
+
+	chip->irq = platform_get_irq(pdev, 0);
+	if (chip->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return chip->irq;
+	}
+
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
+		return PTR_ERR(chip->rtc);
+
+	chip->rtc->ops = &ac100_rtc_ops;
+
+	ret = devm_request_threaded_irq(&pdev->dev, chip->irq, NULL,
+					ac100_rtc_irq,
+					IRQF_SHARED | IRQF_ONESHOT,
+					dev_name(&pdev->dev), chip);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	/* always use 24 hour mode */
+	regmap_write_bits(chip->regmap, AC100_RTC_CTRL, AC100_RTC_CTRL_24HOUR,
+			  AC100_RTC_CTRL_24HOUR);
+
+	/* disable counter alarm interrupt */
+	regmap_write(chip->regmap, AC100_ALM_INT_ENA, 0);
+
+	/* clear counter alarm pending interrupts */
+	regmap_write(chip->regmap, AC100_ALM_INT_STA, AC100_ALM_INT_ENABLE);
+
+	ret = ac100_rtc_register_clks(chip);
+	if (ret)
+		return ret;
+
+	ret = rtc_register_device(chip->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "RTC enabled\n");
+
+	return 0;
+}
+
+static int ac100_rtc_remove(struct platform_device *pdev)
+{
+	struct ac100_rtc_dev *chip = platform_get_drvdata(pdev);
+
+	ac100_rtc_unregister_clks(chip);
+
+	return 0;
+}
+
+static const struct of_device_id ac100_rtc_match[] = {
+	{ .compatible = "x-powers,ac100-rtc" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ac100_rtc_match);
+
+static struct platform_driver ac100_rtc_driver = {
+	.probe		= ac100_rtc_probe,
+	.remove		= ac100_rtc_remove,
+	.driver		= {
+		.name		= "ac100-rtc",
+		.of_match_table	= of_match_ptr(ac100_rtc_match),
+	},
+};
+module_platform_driver(ac100_rtc_driver);
+
+MODULE_DESCRIPTION("X-Powers AC100 RTC driver");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-armada38x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-armada38x.c
new file mode 100644
index 0000000..10b5c85
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-armada38x.c
@@ -0,0 +1,505 @@
+/*
+ * RTC driver for the Armada 38x Marvell SoCs
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define RTC_STATUS	    0x0
+#define RTC_STATUS_ALARM1	    BIT(0)
+#define RTC_STATUS_ALARM2	    BIT(1)
+#define RTC_IRQ1_CONF	    0x4
+#define RTC_IRQ2_CONF	    0x8
+#define RTC_IRQ_AL_EN		    BIT(0)
+#define RTC_IRQ_FREQ_EN		    BIT(1)
+#define RTC_IRQ_FREQ_1HZ	    BIT(2)
+
+#define RTC_TIME	    0xC
+#define RTC_ALARM1	    0x10
+#define RTC_ALARM2	    0x14
+
+/* Armada38x SoC registers  */
+#define RTC_38X_BRIDGE_TIMING_CTL   0x0
+#define RTC_38X_PERIOD_OFFS		0
+#define RTC_38X_PERIOD_MASK		(0x3FF << RTC_38X_PERIOD_OFFS)
+#define RTC_38X_READ_DELAY_OFFS		26
+#define RTC_38X_READ_DELAY_MASK		(0x1F << RTC_38X_READ_DELAY_OFFS)
+
+/* Armada 7K/8K registers  */
+#define RTC_8K_BRIDGE_TIMING_CTL0    0x0
+#define RTC_8K_WRCLK_PERIOD_OFFS	0
+#define RTC_8K_WRCLK_PERIOD_MASK	(0xFFFF << RTC_8K_WRCLK_PERIOD_OFFS)
+#define RTC_8K_WRCLK_SETUP_OFFS		16
+#define RTC_8K_WRCLK_SETUP_MASK		(0xFFFF << RTC_8K_WRCLK_SETUP_OFFS)
+#define RTC_8K_BRIDGE_TIMING_CTL1   0x4
+#define RTC_8K_READ_DELAY_OFFS		0
+#define RTC_8K_READ_DELAY_MASK		(0xFFFF << RTC_8K_READ_DELAY_OFFS)
+
+#define RTC_8K_ISR		    0x10
+#define RTC_8K_IMR		    0x14
+#define RTC_8K_ALARM2			BIT(0)
+
+#define SOC_RTC_INTERRUPT	    0x8
+#define SOC_RTC_ALARM1			BIT(0)
+#define SOC_RTC_ALARM2			BIT(1)
+#define SOC_RTC_ALARM1_MASK		BIT(2)
+#define SOC_RTC_ALARM2_MASK		BIT(3)
+
+#define SAMPLE_NR 100
+
+struct value_to_freq {
+	u32 value;
+	u8 freq;
+};
+
+struct armada38x_rtc {
+	struct rtc_device   *rtc_dev;
+	void __iomem	    *regs;
+	void __iomem	    *regs_soc;
+	spinlock_t	    lock;
+	int		    irq;
+	struct value_to_freq *val_to_freq;
+	struct armada38x_rtc_data *data;
+};
+
+#define ALARM1	0
+#define ALARM2	1
+
+#define ALARM_REG(base, alarm)	 ((base) + (alarm) * sizeof(u32))
+
+struct armada38x_rtc_data {
+	/* Initialize the RTC-MBUS bridge timing */
+	void (*update_mbus_timing)(struct armada38x_rtc *rtc);
+	u32 (*read_rtc_reg)(struct armada38x_rtc *rtc, u8 rtc_reg);
+	void (*clear_isr)(struct armada38x_rtc *rtc);
+	void (*unmask_interrupt)(struct armada38x_rtc *rtc);
+	u32 alarm;
+};
+
+/*
+ * According to the datasheet, the OS should wait 5us after every
+ * register write to the RTC hard macro so that the required update
+ * can occur without holding off the system bus
+ * According to errata RES-3124064, Write to any RTC register
+ * may fail. As a workaround, before writing to RTC
+ * register, issue a dummy write of 0x0 twice to RTC Status
+ * register.
+ */
+
+static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
+{
+	writel(0, rtc->regs + RTC_STATUS);
+	writel(0, rtc->regs + RTC_STATUS);
+	writel(val, rtc->regs + offset);
+	udelay(5);
+}
+
+/* Update RTC-MBUS bridge timing parameters */
+static void rtc_update_38x_mbus_timing_params(struct armada38x_rtc *rtc)
+{
+	u32 reg;
+
+	reg = readl(rtc->regs_soc + RTC_38X_BRIDGE_TIMING_CTL);
+	reg &= ~RTC_38X_PERIOD_MASK;
+	reg |= 0x3FF << RTC_38X_PERIOD_OFFS; /* Maximum value */
+	reg &= ~RTC_38X_READ_DELAY_MASK;
+	reg |= 0x1F << RTC_38X_READ_DELAY_OFFS; /* Maximum value */
+	writel(reg, rtc->regs_soc + RTC_38X_BRIDGE_TIMING_CTL);
+}
+
+static void rtc_update_8k_mbus_timing_params(struct armada38x_rtc *rtc)
+{
+	u32 reg;
+
+	reg = readl(rtc->regs_soc + RTC_8K_BRIDGE_TIMING_CTL0);
+	reg &= ~RTC_8K_WRCLK_PERIOD_MASK;
+	reg |= 0x3FF << RTC_8K_WRCLK_PERIOD_OFFS;
+	reg &= ~RTC_8K_WRCLK_SETUP_MASK;
+	reg |= 0x29 << RTC_8K_WRCLK_SETUP_OFFS;
+	writel(reg, rtc->regs_soc + RTC_8K_BRIDGE_TIMING_CTL0);
+
+	reg = readl(rtc->regs_soc + RTC_8K_BRIDGE_TIMING_CTL1);
+	reg &= ~RTC_8K_READ_DELAY_MASK;
+	reg |= 0x3F << RTC_8K_READ_DELAY_OFFS;
+	writel(reg, rtc->regs_soc + RTC_8K_BRIDGE_TIMING_CTL1);
+}
+
+static u32 read_rtc_register(struct armada38x_rtc *rtc, u8 rtc_reg)
+{
+	return readl(rtc->regs + rtc_reg);
+}
+
+static u32 read_rtc_register_38x_wa(struct armada38x_rtc *rtc, u8 rtc_reg)
+{
+	int i, index_max = 0, max = 0;
+
+	for (i = 0; i < SAMPLE_NR; i++) {
+		rtc->val_to_freq[i].value = readl(rtc->regs + rtc_reg);
+		rtc->val_to_freq[i].freq = 0;
+	}
+
+	for (i = 0; i < SAMPLE_NR; i++) {
+		int j = 0;
+		u32 value = rtc->val_to_freq[i].value;
+
+		while (rtc->val_to_freq[j].freq) {
+			if (rtc->val_to_freq[j].value == value) {
+				rtc->val_to_freq[j].freq++;
+				break;
+			}
+			j++;
+		}
+
+		if (!rtc->val_to_freq[j].freq) {
+			rtc->val_to_freq[j].value = value;
+			rtc->val_to_freq[j].freq = 1;
+		}
+
+		if (rtc->val_to_freq[j].freq > max) {
+			index_max = j;
+			max = rtc->val_to_freq[j].freq;
+		}
+
+		/*
+		 * If a value already has half of the sample this is the most
+		 * frequent one and we can stop the research right now
+		 */
+		if (max > SAMPLE_NR / 2)
+			break;
+	}
+
+	return rtc->val_to_freq[index_max].value;
+}
+
+static void armada38x_clear_isr(struct armada38x_rtc *rtc)
+{
+	u32 val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
+
+	writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
+}
+
+static void armada38x_unmask_interrupt(struct armada38x_rtc *rtc)
+{
+	u32 val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
+
+	writel(val | SOC_RTC_ALARM1_MASK, rtc->regs_soc + SOC_RTC_INTERRUPT);
+}
+
+static void armada8k_clear_isr(struct armada38x_rtc *rtc)
+{
+	writel(RTC_8K_ALARM2, rtc->regs_soc + RTC_8K_ISR);
+}
+
+static void armada8k_unmask_interrupt(struct armada38x_rtc *rtc)
+{
+	writel(RTC_8K_ALARM2, rtc->regs_soc + RTC_8K_IMR);
+}
+
+static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long time, flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	time = rtc->data->read_rtc_reg(rtc, RTC_TIME);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	rtc_time_to_tm(time, tm);
+
+	return 0;
+}
+
+static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+	int ret = 0;
+	unsigned long time, flags;
+
+	ret = rtc_tm_to_time(tm, &time);
+
+	if (ret)
+		goto out;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	rtc_delayed_write(time, rtc, RTC_TIME);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+out:
+	return ret;
+}
+
+static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long time, flags;
+	u32 reg = ALARM_REG(RTC_ALARM1, rtc->data->alarm);
+	u32 reg_irq = ALARM_REG(RTC_IRQ1_CONF, rtc->data->alarm);
+	u32 val;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	time = rtc->data->read_rtc_reg(rtc, reg);
+	val = rtc->data->read_rtc_reg(rtc, reg_irq) & RTC_IRQ_AL_EN;
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	alrm->enabled = val ? 1 : 0;
+	rtc_time_to_tm(time,  &alrm->time);
+
+	return 0;
+}
+
+static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+	u32 reg = ALARM_REG(RTC_ALARM1, rtc->data->alarm);
+	u32 reg_irq = ALARM_REG(RTC_IRQ1_CONF, rtc->data->alarm);
+	unsigned long time, flags;
+	int ret = 0;
+
+	ret = rtc_tm_to_time(&alrm->time, &time);
+
+	if (ret)
+		goto out;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	rtc_delayed_write(time, rtc, reg);
+
+	if (alrm->enabled) {
+		rtc_delayed_write(RTC_IRQ_AL_EN, rtc, reg_irq);
+		rtc->data->unmask_interrupt(rtc);
+	}
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+out:
+	return ret;
+}
+
+static int armada38x_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+	u32 reg_irq = ALARM_REG(RTC_IRQ1_CONF, rtc->data->alarm);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	if (enabled)
+		rtc_delayed_write(RTC_IRQ_AL_EN, rtc, reg_irq);
+	else
+		rtc_delayed_write(0, rtc, reg_irq);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
+{
+	struct armada38x_rtc *rtc = data;
+	u32 val;
+	int event = RTC_IRQF | RTC_AF;
+	u32 reg_irq = ALARM_REG(RTC_IRQ1_CONF, rtc->data->alarm);
+
+	dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
+
+	spin_lock(&rtc->lock);
+
+	rtc->data->clear_isr(rtc);
+	val = rtc->data->read_rtc_reg(rtc, reg_irq);
+	/* disable all the interrupts for alarm*/
+	rtc_delayed_write(0, rtc, reg_irq);
+	/* Ack the event */
+	rtc_delayed_write(1 << rtc->data->alarm, rtc, RTC_STATUS);
+
+	spin_unlock(&rtc->lock);
+
+	if (val & RTC_IRQ_FREQ_EN) {
+		if (val & RTC_IRQ_FREQ_1HZ)
+			event |= RTC_UF;
+		else
+			event |= RTC_PF;
+	}
+
+	rtc_update_irq(rtc->rtc_dev, 1, event);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops armada38x_rtc_ops = {
+	.read_time = armada38x_rtc_read_time,
+	.set_time = armada38x_rtc_set_time,
+	.read_alarm = armada38x_rtc_read_alarm,
+	.set_alarm = armada38x_rtc_set_alarm,
+	.alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops armada38x_rtc_ops_noirq = {
+	.read_time = armada38x_rtc_read_time,
+	.set_time = armada38x_rtc_set_time,
+	.read_alarm = armada38x_rtc_read_alarm,
+};
+
+static const struct armada38x_rtc_data armada38x_data = {
+	.update_mbus_timing = rtc_update_38x_mbus_timing_params,
+	.read_rtc_reg = read_rtc_register_38x_wa,
+	.clear_isr = armada38x_clear_isr,
+	.unmask_interrupt = armada38x_unmask_interrupt,
+	.alarm = ALARM1,
+};
+
+static const struct armada38x_rtc_data armada8k_data = {
+	.update_mbus_timing = rtc_update_8k_mbus_timing_params,
+	.read_rtc_reg = read_rtc_register,
+	.clear_isr = armada8k_clear_isr,
+	.unmask_interrupt = armada8k_unmask_interrupt,
+	.alarm = ALARM2,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id armada38x_rtc_of_match_table[] = {
+	{
+		.compatible = "marvell,armada-380-rtc",
+		.data = &armada38x_data,
+	},
+	{
+		.compatible = "marvell,armada-8k-rtc",
+		.data = &armada8k_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, armada38x_rtc_of_match_table);
+#endif
+
+static __init int armada38x_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct armada38x_rtc *rtc;
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_device(armada38x_rtc_of_match_table, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
+			    GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->val_to_freq = devm_kcalloc(&pdev->dev, SAMPLE_NR,
+				sizeof(struct value_to_freq), GFP_KERNEL);
+	if (!rtc->val_to_freq)
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
+	rtc->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->regs))
+		return PTR_ERR(rtc->regs);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
+	rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->regs_soc))
+		return PTR_ERR(rtc->regs_soc);
+
+	rtc->irq = platform_get_irq(pdev, 0);
+
+	if (rtc->irq < 0) {
+		dev_err(&pdev->dev, "no irq\n");
+		return rtc->irq;
+	}
+
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
+				0, pdev->name, rtc) < 0) {
+		dev_warn(&pdev->dev, "Interrupt not available.\n");
+		rtc->irq = -1;
+	}
+	platform_set_drvdata(pdev, rtc);
+
+	if (rtc->irq != -1) {
+		device_init_wakeup(&pdev->dev, 1);
+		rtc->rtc_dev->ops = &armada38x_rtc_ops;
+	} else {
+		/*
+		 * If there is no interrupt available then we can't
+		 * use the alarm
+		 */
+		rtc->rtc_dev->ops = &armada38x_rtc_ops_noirq;
+	}
+	rtc->data = (struct armada38x_rtc_data *)match->data;
+
+	/* Update RTC-MBUS bridge timing parameters */
+	rtc->data->update_mbus_timing(rtc);
+
+	ret = rtc_register_device(rtc->rtc_dev);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int armada38x_rtc_suspend(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+
+		return enable_irq_wake(rtc->irq);
+	}
+
+	return 0;
+}
+
+static int armada38x_rtc_resume(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+
+		/* Update RTC-MBUS bridge timing parameters */
+		rtc->data->update_mbus_timing(rtc);
+
+		return disable_irq_wake(rtc->irq);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
+			 armada38x_rtc_suspend, armada38x_rtc_resume);
+
+static struct platform_driver armada38x_rtc_driver = {
+	.driver		= {
+		.name	= "armada38x-rtc",
+		.pm	= &armada38x_rtc_pm_ops,
+		.of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
+	},
+};
+
+module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
+
+MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-as3722.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-as3722.c
new file mode 100644
index 0000000..6ef0c88
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-as3722.c
@@ -0,0 +1,261 @@
+/*
+ * rtc-as3722.c - Real Time Clock driver for ams AS3722 PMICs
+ *
+ * Copyright (C) 2013 ams AG
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bcd.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/as3722.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+
+#define AS3722_RTC_START_YEAR	  2000
+struct as3722_rtc {
+	struct rtc_device	*rtc;
+	struct device		*dev;
+	struct as3722		*as3722;
+	int			alarm_irq;
+	bool			irq_enable;
+};
+
+static void as3722_time_to_reg(u8 *rbuff, struct rtc_time *tm)
+{
+	rbuff[0] = bin2bcd(tm->tm_sec);
+	rbuff[1] = bin2bcd(tm->tm_min);
+	rbuff[2] = bin2bcd(tm->tm_hour);
+	rbuff[3] = bin2bcd(tm->tm_mday);
+	rbuff[4] = bin2bcd(tm->tm_mon + 1);
+	rbuff[5] = bin2bcd(tm->tm_year - (AS3722_RTC_START_YEAR - 1900));
+}
+
+static void as3722_reg_to_time(u8 *rbuff, struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(rbuff[0] & 0x7F);
+	tm->tm_min = bcd2bin(rbuff[1] & 0x7F);
+	tm->tm_hour = bcd2bin(rbuff[2] & 0x3F);
+	tm->tm_mday = bcd2bin(rbuff[3] & 0x3F);
+	tm->tm_mon = bcd2bin(rbuff[4] & 0x1F) - 1;
+	tm->tm_year = (AS3722_RTC_START_YEAR - 1900) + bcd2bin(rbuff[5] & 0x7F);
+	return;
+}
+
+static int as3722_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_rtc->as3722;
+	u8 as_time_array[6];
+	int ret;
+
+	ret = as3722_block_read(as3722, AS3722_RTC_SECOND_REG,
+			6, as_time_array);
+	if (ret < 0) {
+		dev_err(dev, "RTC_SECOND reg block read failed %d\n", ret);
+		return ret;
+	}
+	as3722_reg_to_time(as_time_array, tm);
+	return 0;
+}
+
+static int as3722_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_rtc->as3722;
+	u8 as_time_array[6];
+	int ret;
+
+	if (tm->tm_year < (AS3722_RTC_START_YEAR - 1900))
+		return -EINVAL;
+
+	as3722_time_to_reg(as_time_array, tm);
+	ret = as3722_block_write(as3722, AS3722_RTC_SECOND_REG, 6,
+			as_time_array);
+	if (ret < 0)
+		dev_err(dev, "RTC_SECOND reg block write failed %d\n", ret);
+	return ret;
+}
+
+static int as3722_rtc_alarm_irq_enable(struct device *dev,
+		unsigned int enabled)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+	if (enabled && !as3722_rtc->irq_enable) {
+		enable_irq(as3722_rtc->alarm_irq);
+		as3722_rtc->irq_enable = true;
+	} else if (!enabled && as3722_rtc->irq_enable)  {
+		disable_irq(as3722_rtc->alarm_irq);
+		as3722_rtc->irq_enable = false;
+	}
+	return 0;
+}
+
+static int as3722_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_rtc->as3722;
+	u8 as_time_array[6];
+	int ret;
+
+	ret = as3722_block_read(as3722, AS3722_RTC_ALARM_SECOND_REG, 6,
+			as_time_array);
+	if (ret < 0) {
+		dev_err(dev, "RTC_ALARM_SECOND block read failed %d\n", ret);
+		return ret;
+	}
+
+	as3722_reg_to_time(as_time_array, &alrm->time);
+	return 0;
+}
+
+static int as3722_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_rtc->as3722;
+	u8 as_time_array[6];
+	int ret;
+
+	if (alrm->time.tm_year < (AS3722_RTC_START_YEAR - 1900))
+		return -EINVAL;
+
+	ret = as3722_rtc_alarm_irq_enable(dev, 0);
+	if (ret < 0) {
+		dev_err(dev, "Disable RTC alarm failed\n");
+		return ret;
+	}
+
+	as3722_time_to_reg(as_time_array, &alrm->time);
+	ret = as3722_block_write(as3722, AS3722_RTC_ALARM_SECOND_REG, 6,
+			as_time_array);
+	if (ret < 0) {
+		dev_err(dev, "RTC_ALARM_SECOND block write failed %d\n", ret);
+		return ret;
+	}
+
+	if (alrm->enabled)
+		ret = as3722_rtc_alarm_irq_enable(dev, alrm->enabled);
+	return ret;
+}
+
+static irqreturn_t as3722_alarm_irq(int irq, void *data)
+{
+	struct as3722_rtc *as3722_rtc = data;
+
+	rtc_update_irq(as3722_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops as3722_rtc_ops = {
+	.read_time = as3722_rtc_read_time,
+	.set_time = as3722_rtc_set_time,
+	.read_alarm = as3722_rtc_read_alarm,
+	.set_alarm = as3722_rtc_set_alarm,
+	.alarm_irq_enable = as3722_rtc_alarm_irq_enable,
+};
+
+static int as3722_rtc_probe(struct platform_device *pdev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent);
+	struct as3722_rtc *as3722_rtc;
+	int ret;
+
+	as3722_rtc = devm_kzalloc(&pdev->dev, sizeof(*as3722_rtc), GFP_KERNEL);
+	if (!as3722_rtc)
+		return -ENOMEM;
+
+	as3722_rtc->as3722 = as3722;
+	as3722_rtc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, as3722_rtc);
+
+	/* Enable the RTC to make sure it is running. */
+	ret = as3722_update_bits(as3722, AS3722_RTC_CONTROL_REG,
+			AS3722_RTC_ON | AS3722_RTC_ALARM_WAKEUP_EN,
+			AS3722_RTC_ON | AS3722_RTC_ALARM_WAKEUP_EN);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "RTC_CONTROL reg write failed: %d\n", ret);
+		return ret;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	as3722_rtc->rtc = devm_rtc_device_register(&pdev->dev, "as3722-rtc",
+				&as3722_rtc_ops, THIS_MODULE);
+	if (IS_ERR(as3722_rtc->rtc)) {
+		ret = PTR_ERR(as3722_rtc->rtc);
+		dev_err(&pdev->dev, "RTC register failed: %d\n", ret);
+		return ret;
+	}
+
+	as3722_rtc->alarm_irq = platform_get_irq(pdev, 0);
+	dev_info(&pdev->dev, "RTC interrupt %d\n", as3722_rtc->alarm_irq);
+
+	ret = devm_request_threaded_irq(&pdev->dev, as3722_rtc->alarm_irq, NULL,
+			as3722_alarm_irq, IRQF_ONESHOT,
+			"rtc-alarm", as3722_rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+				as3722_rtc->alarm_irq, ret);
+		return ret;
+	}
+	disable_irq(as3722_rtc->alarm_irq);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int as3722_rtc_suspend(struct device *dev)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(as3722_rtc->alarm_irq);
+
+	return 0;
+}
+
+static int as3722_rtc_resume(struct device *dev)
+{
+	struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(as3722_rtc->alarm_irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(as3722_rtc_pm_ops, as3722_rtc_suspend,
+			 as3722_rtc_resume);
+
+static struct platform_driver as3722_rtc_driver = {
+	.probe = as3722_rtc_probe,
+	.driver = {
+		.name = "as3722-rtc",
+		.pm = &as3722_rtc_pm_ops,
+	},
+};
+module_platform_driver(as3722_rtc_driver);
+
+MODULE_DESCRIPTION("RTC driver for AS3722 PMICs");
+MODULE_ALIAS("platform:as3722-rtc");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-asm9260.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-asm9260.c
new file mode 100644
index 0000000..d365349
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-asm9260.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2016 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* Miscellaneous registers */
+/* Interrupt Location Register */
+#define HW_ILR			0x00
+#define BM_RTCALF		BIT(1)
+#define BM_RTCCIF		BIT(0)
+
+/* Clock Control Register */
+#define HW_CCR			0x08
+/* Calibration counter disable */
+#define BM_CCALOFF		BIT(4)
+/* Reset internal oscillator divider */
+#define BM_CTCRST		BIT(1)
+/* Clock Enable */
+#define BM_CLKEN		BIT(0)
+
+/* Counter Increment Interrupt Register */
+#define HW_CIIR			0x0C
+#define BM_CIIR_IMYEAR		BIT(7)
+#define BM_CIIR_IMMON		BIT(6)
+#define BM_CIIR_IMDOY		BIT(5)
+#define BM_CIIR_IMDOW		BIT(4)
+#define BM_CIIR_IMDOM		BIT(3)
+#define BM_CIIR_IMHOUR		BIT(2)
+#define BM_CIIR_IMMIN		BIT(1)
+#define BM_CIIR_IMSEC		BIT(0)
+
+/* Alarm Mask Register */
+#define HW_AMR			0x10
+#define BM_AMR_IMYEAR		BIT(7)
+#define BM_AMR_IMMON		BIT(6)
+#define BM_AMR_IMDOY		BIT(5)
+#define BM_AMR_IMDOW		BIT(4)
+#define BM_AMR_IMDOM		BIT(3)
+#define BM_AMR_IMHOUR		BIT(2)
+#define BM_AMR_IMMIN		BIT(1)
+#define BM_AMR_IMSEC		BIT(0)
+#define BM_AMR_OFF		0xff
+
+/* Consolidated time registers */
+#define HW_CTIME0		0x14
+#define BM_CTIME0_DOW_S		24
+#define BM_CTIME0_DOW_M		0x7
+#define BM_CTIME0_HOUR_S	16
+#define BM_CTIME0_HOUR_M	0x1f
+#define BM_CTIME0_MIN_S		8
+#define BM_CTIME0_MIN_M		0x3f
+#define BM_CTIME0_SEC_S		0
+#define BM_CTIME0_SEC_M		0x3f
+
+#define HW_CTIME1		0x18
+#define BM_CTIME1_YEAR_S	16
+#define BM_CTIME1_YEAR_M	0xfff
+#define BM_CTIME1_MON_S		8
+#define BM_CTIME1_MON_M		0xf
+#define BM_CTIME1_DOM_S		0
+#define BM_CTIME1_DOM_M		0x1f
+
+#define HW_CTIME2		0x1C
+#define BM_CTIME2_DOY_S		0
+#define BM_CTIME2_DOY_M		0xfff
+
+/* Time counter registers */
+#define HW_SEC			0x20
+#define HW_MIN			0x24
+#define HW_HOUR			0x28
+#define HW_DOM			0x2C
+#define HW_DOW			0x30
+#define HW_DOY			0x34
+#define HW_MONTH		0x38
+#define HW_YEAR			0x3C
+
+#define HW_CALIBRATION		0x40
+#define BM_CALDIR_BACK		BIT(17)
+#define BM_CALVAL_M		0x1ffff
+
+/* General purpose registers */
+#define HW_GPREG0		0x44
+#define HW_GPREG1		0x48
+#define HW_GPREG2		0x4C
+#define HW_GPREG3		0x50
+#define HW_GPREG4		0x54
+
+/* Alarm register group */
+#define HW_ALSEC		0x60
+#define HW_ALMIN		0x64
+#define HW_ALHOUR		0x68
+#define HW_ALDOM		0x6C
+#define HW_ALDOW		0x70
+#define HW_ALDOY		0x74
+#define HW_ALMON		0x78
+#define HW_ALYEAR		0x7C
+
+struct asm9260_rtc_priv {
+	struct device		*dev;
+	void __iomem		*iobase;
+	struct rtc_device	*rtc;
+	struct clk		*clk;
+};
+
+static irqreturn_t asm9260_rtc_irq(int irq, void *dev_id)
+{
+	struct asm9260_rtc_priv *priv = dev_id;
+	u32 isr;
+	unsigned long events = 0;
+
+	mutex_lock(&priv->rtc->ops_lock);
+	isr = ioread32(priv->iobase + HW_CIIR);
+	if (!isr) {
+		mutex_unlock(&priv->rtc->ops_lock);
+		return IRQ_NONE;
+	}
+
+	iowrite32(0, priv->iobase + HW_CIIR);
+	mutex_unlock(&priv->rtc->ops_lock);
+
+	events |= RTC_AF | RTC_IRQF;
+
+	rtc_update_irq(priv->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+	u32 ctime0, ctime1, ctime2;
+
+	ctime0 = ioread32(priv->iobase + HW_CTIME0);
+	ctime1 = ioread32(priv->iobase + HW_CTIME1);
+	ctime2 = ioread32(priv->iobase + HW_CTIME2);
+
+	if (ctime1 != ioread32(priv->iobase + HW_CTIME1)) {
+		/*
+		 * woops, counter flipped right now. Now we are safe
+		 * to reread.
+		 */
+		ctime0 = ioread32(priv->iobase + HW_CTIME0);
+		ctime1 = ioread32(priv->iobase + HW_CTIME1);
+		ctime2 = ioread32(priv->iobase + HW_CTIME2);
+	}
+
+	tm->tm_sec  = (ctime0 >> BM_CTIME0_SEC_S)  & BM_CTIME0_SEC_M;
+	tm->tm_min  = (ctime0 >> BM_CTIME0_MIN_S)  & BM_CTIME0_MIN_M;
+	tm->tm_hour = (ctime0 >> BM_CTIME0_HOUR_S) & BM_CTIME0_HOUR_M;
+	tm->tm_wday = (ctime0 >> BM_CTIME0_DOW_S)  & BM_CTIME0_DOW_M;
+
+	tm->tm_mday = (ctime1 >> BM_CTIME1_DOM_S)  & BM_CTIME1_DOM_M;
+	tm->tm_mon  = (ctime1 >> BM_CTIME1_MON_S)  & BM_CTIME1_MON_M;
+	tm->tm_year = (ctime1 >> BM_CTIME1_YEAR_S) & BM_CTIME1_YEAR_M;
+
+	tm->tm_yday = (ctime2 >> BM_CTIME2_DOY_S)  & BM_CTIME2_DOY_M;
+
+	return 0;
+}
+
+static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+	/*
+	 * make sure SEC counter will not flip other counter on write time,
+	 * real value will be written at the enf of sequence.
+	 */
+	iowrite32(0, priv->iobase + HW_SEC);
+
+	iowrite32(tm->tm_year, priv->iobase + HW_YEAR);
+	iowrite32(tm->tm_mon,  priv->iobase + HW_MONTH);
+	iowrite32(tm->tm_mday, priv->iobase + HW_DOM);
+	iowrite32(tm->tm_wday, priv->iobase + HW_DOW);
+	iowrite32(tm->tm_yday, priv->iobase + HW_DOY);
+	iowrite32(tm->tm_hour, priv->iobase + HW_HOUR);
+	iowrite32(tm->tm_min,  priv->iobase + HW_MIN);
+	iowrite32(tm->tm_sec,  priv->iobase + HW_SEC);
+
+	return 0;
+}
+
+static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+	alrm->time.tm_year = ioread32(priv->iobase + HW_ALYEAR);
+	alrm->time.tm_mon  = ioread32(priv->iobase + HW_ALMON);
+	alrm->time.tm_mday = ioread32(priv->iobase + HW_ALDOM);
+	alrm->time.tm_wday = ioread32(priv->iobase + HW_ALDOW);
+	alrm->time.tm_yday = ioread32(priv->iobase + HW_ALDOY);
+	alrm->time.tm_hour = ioread32(priv->iobase + HW_ALHOUR);
+	alrm->time.tm_min  = ioread32(priv->iobase + HW_ALMIN);
+	alrm->time.tm_sec  = ioread32(priv->iobase + HW_ALSEC);
+
+	alrm->enabled = ioread32(priv->iobase + HW_AMR) ? 1 : 0;
+	alrm->pending = ioread32(priv->iobase + HW_CIIR) ? 1 : 0;
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int asm9260_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+	iowrite32(alrm->time.tm_year, priv->iobase + HW_ALYEAR);
+	iowrite32(alrm->time.tm_mon,  priv->iobase + HW_ALMON);
+	iowrite32(alrm->time.tm_mday, priv->iobase + HW_ALDOM);
+	iowrite32(alrm->time.tm_wday, priv->iobase + HW_ALDOW);
+	iowrite32(alrm->time.tm_yday, priv->iobase + HW_ALDOY);
+	iowrite32(alrm->time.tm_hour, priv->iobase + HW_ALHOUR);
+	iowrite32(alrm->time.tm_min,  priv->iobase + HW_ALMIN);
+	iowrite32(alrm->time.tm_sec,  priv->iobase + HW_ALSEC);
+
+	iowrite32(alrm->enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+
+	return 0;
+}
+
+static int asm9260_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+	iowrite32(enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+	return 0;
+}
+
+static const struct rtc_class_ops asm9260_rtc_ops = {
+	.read_time		= asm9260_rtc_read_time,
+	.set_time		= asm9260_rtc_set_time,
+	.read_alarm		= asm9260_rtc_read_alarm,
+	.set_alarm		= asm9260_rtc_set_alarm,
+	.alarm_irq_enable	= asm9260_alarm_irq_enable,
+};
+
+static int asm9260_rtc_probe(struct platform_device *pdev)
+{
+	struct asm9260_rtc_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	int irq_alarm, ret;
+	u32 ccr;
+
+	priv = devm_kzalloc(dev, sizeof(struct asm9260_rtc_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	platform_set_drvdata(pdev, priv);
+
+	irq_alarm = platform_get_irq(pdev, 0);
+	if (irq_alarm < 0) {
+		dev_err(dev, "No alarm IRQ resource defined\n");
+		return irq_alarm;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->iobase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->iobase))
+		return PTR_ERR(priv->iobase);
+
+	priv->clk = devm_clk_get(dev, "ahb");
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clk!\n");
+		return ret;
+	}
+
+	ccr = ioread32(priv->iobase + HW_CCR);
+	/* if dev is not enabled, reset it */
+	if ((ccr & (BM_CLKEN | BM_CTCRST)) != BM_CLKEN) {
+		iowrite32(BM_CTCRST, priv->iobase + HW_CCR);
+		ccr = 0;
+	}
+
+	iowrite32(BM_CLKEN | ccr, priv->iobase + HW_CCR);
+	iowrite32(0, priv->iobase + HW_CIIR);
+	iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+
+	priv->rtc = devm_rtc_device_register(dev, dev_name(dev),
+					     &asm9260_rtc_ops, THIS_MODULE);
+	if (IS_ERR(priv->rtc)) {
+		ret = PTR_ERR(priv->rtc);
+		dev_err(dev, "Failed to register RTC device: %d\n", ret);
+		goto err_return;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq_alarm, NULL,
+					asm9260_rtc_irq, IRQF_ONESHOT,
+					dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "can't get irq %i, err %d\n",
+			irq_alarm, ret);
+		goto err_return;
+	}
+
+	return 0;
+
+err_return:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int asm9260_rtc_remove(struct platform_device *pdev)
+{
+	struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev);
+
+	/* Disable alarm matching */
+	iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+static const struct of_device_id asm9260_dt_ids[] = {
+	{ .compatible = "alphascale,asm9260-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, asm9260_dt_ids);
+
+static struct platform_driver asm9260_rtc_driver = {
+	.probe		= asm9260_rtc_probe,
+	.remove		= asm9260_rtc_remove,
+	.driver		= {
+		.name	= "asm9260-rtc",
+		.of_match_table = asm9260_dt_ids,
+	},
+};
+
+module_platform_driver(asm9260_rtc_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_DESCRIPTION("Alphascale asm9260 SoC Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-at32ap700x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-at32ap700x.c
new file mode 100644
index 0000000..de8bf56
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-at32ap700x.c
@@ -0,0 +1,287 @@
+/*
+ * An RTC driver for the AVR32 AT32AP700x processor series.
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/io.h>
+
+/*
+ * This is a bare-bones RTC. It runs during most system sleep states, but has
+ * no battery backup and gets reset during system restart.  It must be
+ * initialized from an external clock (network, I2C, etc) before it can be of
+ * much use.
+ *
+ * The alarm functionality is limited by the hardware, not supporting
+ * periodic interrupts.
+ */
+
+#define RTC_CTRL		0x00
+#define RTC_CTRL_EN		   0
+#define RTC_CTRL_PCLR		   1
+#define RTC_CTRL_TOPEN		   2
+#define RTC_CTRL_PSEL		   8
+
+#define RTC_VAL			0x04
+
+#define RTC_TOP			0x08
+
+#define RTC_IER			0x10
+#define RTC_IER_TOPI		   0
+
+#define RTC_IDR			0x14
+#define RTC_IDR_TOPI		   0
+
+#define RTC_IMR			0x18
+#define RTC_IMR_TOPI		   0
+
+#define RTC_ISR			0x1c
+#define RTC_ISR_TOPI		   0
+
+#define RTC_ICR			0x20
+#define RTC_ICR_TOPI		   0
+
+#define RTC_BIT(name)		(1 << RTC_##name)
+#define RTC_BF(name, value)	((value) << RTC_##name)
+
+#define rtc_readl(dev, reg)				\
+	__raw_readl((dev)->regs + RTC_##reg)
+#define rtc_writel(dev, reg, value)			\
+	__raw_writel((value), (dev)->regs + RTC_##reg)
+
+struct rtc_at32ap700x {
+	struct rtc_device	*rtc;
+	void __iomem		*regs;
+	unsigned long		alarm_time;
+	unsigned long		irq;
+	/* Protect against concurrent register access. */
+	spinlock_t		lock;
+};
+
+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+	unsigned long now;
+
+	now = rtc_readl(rtc, VAL);
+	rtc_time_to_tm(now, tm);
+
+	return 0;
+}
+
+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+	unsigned long now;
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0)
+		rtc_writel(rtc, VAL, now);
+
+	return ret;
+}
+
+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+
+	spin_lock_irq(&rtc->lock);
+	rtc_time_to_tm(rtc->alarm_time, &alrm->time);
+	alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+	alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0;
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+	unsigned long rtc_unix_time;
+	unsigned long alarm_unix_time;
+	int ret;
+
+	rtc_unix_time = rtc_readl(rtc, VAL);
+
+	ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
+	if (ret)
+		return ret;
+
+	if (alarm_unix_time < rtc_unix_time)
+		return -EINVAL;
+
+	spin_lock_irq(&rtc->lock);
+	rtc->alarm_time = alarm_unix_time;
+	rtc_writel(rtc, TOP, rtc->alarm_time);
+	if (alrm->enabled)
+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
+				| RTC_BIT(CTRL_TOPEN));
+	else
+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
+				& ~RTC_BIT(CTRL_TOPEN));
+	spin_unlock_irq(&rtc->lock);
+
+	return ret;
+}
+
+static int at32_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+	int ret = 0;
+
+	spin_lock_irq(&rtc->lock);
+
+	if (enabled) {
+		if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
+			ret = -EINVAL;
+			goto out;
+		}
+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
+				| RTC_BIT(CTRL_TOPEN));
+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
+		rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
+	} else {
+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
+				& ~RTC_BIT(CTRL_TOPEN));
+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
+	}
+out:
+	spin_unlock_irq(&rtc->lock);
+
+	return ret;
+}
+
+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
+{
+	struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
+	unsigned long isr = rtc_readl(rtc, ISR);
+	unsigned long events = 0;
+	int ret = IRQ_NONE;
+
+	spin_lock(&rtc->lock);
+
+	if (isr & RTC_BIT(ISR_TOPI)) {
+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
+				& ~RTC_BIT(CTRL_TOPEN));
+		rtc_writel(rtc, VAL, rtc->alarm_time);
+		events = RTC_AF | RTC_IRQF;
+		rtc_update_irq(rtc->rtc, 1, events);
+		ret = IRQ_HANDLED;
+	}
+
+	spin_unlock(&rtc->lock);
+
+	return ret;
+}
+
+static const struct rtc_class_ops at32_rtc_ops = {
+	.read_time	= at32_rtc_readtime,
+	.set_time	= at32_rtc_settime,
+	.read_alarm	= at32_rtc_readalarm,
+	.set_alarm	= at32_rtc_setalarm,
+	.alarm_irq_enable = at32_rtc_alarm_irq_enable,
+};
+
+static int __init at32_rtc_probe(struct platform_device *pdev)
+{
+	struct resource	*regs;
+	struct rtc_at32ap700x *rtc;
+	int irq;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct rtc_at32ap700x),
+			   GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_dbg(&pdev->dev, "no mmio resource defined\n");
+		return -ENXIO;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_dbg(&pdev->dev, "could not get irq\n");
+		return -ENXIO;
+	}
+
+	rtc->irq = irq;
+	rtc->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	if (!rtc->regs) {
+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
+		return -ENOMEM;
+	}
+	spin_lock_init(&rtc->lock);
+
+	/*
+	 * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
+	 *
+	 * Do not reset VAL register, as it can hold an old time
+	 * from last JTAG reset.
+	 */
+	if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
+		rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
+		rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
+				| RTC_BIT(CTRL_EN));
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, at32_rtc_interrupt, IRQF_SHARED,
+				"rtc", rtc);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				&at32_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		dev_dbg(&pdev->dev, "could not register rtc device\n");
+		return PTR_ERR(rtc->rtc);
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
+			(unsigned long)rtc->regs, rtc->irq);
+
+	return 0;
+}
+
+static int __exit at32_rtc_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:at32ap700x_rtc");
+
+static struct platform_driver at32_rtc_driver = {
+	.remove		= __exit_p(at32_rtc_remove),
+	.driver		= {
+		.name	= "at32ap700x_rtc",
+	},
+};
+
+module_platform_driver_probe(at32_rtc_driver, at32_rtc_probe);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
+MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.c
new file mode 100644
index 0000000..e221b78
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.c
@@ -0,0 +1,563 @@
+/*
+ *	Real Time Clock interface for Linux on Atmel AT91RM9200
+ *
+ *	Copyright (C) 2002 Rick Bronson
+ *
+ *	Converted to RTC class model by Andrew Victor
+ *
+ *	Ported to Linux 2.6 by Steven Scholz
+ *	Based on s3c2410-rtc.c Simtec Electronics
+ *
+ *	Based on sa1100-rtc.c by Nils Faerber
+ *	Based on rtc.c by Paul Gortmaker
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <linux/suspend.h>
+#include <linux/time.h>
+#include <linux/uaccess.h>
+
+#include "rtc-at91rm9200.h"
+
+#define at91_rtc_read(field) \
+	readl_relaxed(at91_rtc_regs + field)
+#define at91_rtc_write(field, val) \
+	writel_relaxed((val), at91_rtc_regs + field)
+
+#define AT91_RTC_EPOCH		1900UL	/* just like arch/arm/common/rtctime.c */
+
+struct at91_rtc_config {
+	bool use_shadow_imr;
+};
+
+static const struct at91_rtc_config *at91_rtc_config;
+static DECLARE_COMPLETION(at91_rtc_updated);
+static DECLARE_COMPLETION(at91_rtc_upd_rdy);
+static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
+static void __iomem *at91_rtc_regs;
+static int irq;
+static DEFINE_SPINLOCK(at91_rtc_lock);
+static u32 at91_rtc_shadow_imr;
+static bool suspended;
+static DEFINE_SPINLOCK(suspended_lock);
+static unsigned long cached_events;
+static u32 at91_rtc_imr;
+static struct clk *sclk;
+
+static void at91_rtc_write_ier(u32 mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&at91_rtc_lock, flags);
+	at91_rtc_shadow_imr |= mask;
+	at91_rtc_write(AT91_RTC_IER, mask);
+	spin_unlock_irqrestore(&at91_rtc_lock, flags);
+}
+
+static void at91_rtc_write_idr(u32 mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&at91_rtc_lock, flags);
+	at91_rtc_write(AT91_RTC_IDR, mask);
+	/*
+	 * Register read back (of any RTC-register) needed to make sure
+	 * IDR-register write has reached the peripheral before updating
+	 * shadow mask.
+	 *
+	 * Note that there is still a possibility that the mask is updated
+	 * before interrupts have actually been disabled in hardware. The only
+	 * way to be certain would be to poll the IMR-register, which is is
+	 * the very register we are trying to emulate. The register read back
+	 * is a reasonable heuristic.
+	 */
+	at91_rtc_read(AT91_RTC_SR);
+	at91_rtc_shadow_imr &= ~mask;
+	spin_unlock_irqrestore(&at91_rtc_lock, flags);
+}
+
+static u32 at91_rtc_read_imr(void)
+{
+	unsigned long flags;
+	u32 mask;
+
+	if (at91_rtc_config->use_shadow_imr) {
+		spin_lock_irqsave(&at91_rtc_lock, flags);
+		mask = at91_rtc_shadow_imr;
+		spin_unlock_irqrestore(&at91_rtc_lock, flags);
+	} else {
+		mask = at91_rtc_read(AT91_RTC_IMR);
+	}
+
+	return mask;
+}
+
+/*
+ * Decode time/date into rtc_time structure
+ */
+static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
+				struct rtc_time *tm)
+{
+	unsigned int time, date;
+
+	/* must read twice in case it changes */
+	do {
+		time = at91_rtc_read(timereg);
+		date = at91_rtc_read(calreg);
+	} while ((time != at91_rtc_read(timereg)) ||
+			(date != at91_rtc_read(calreg)));
+
+	tm->tm_sec  = bcd2bin((time & AT91_RTC_SEC) >> 0);
+	tm->tm_min  = bcd2bin((time & AT91_RTC_MIN) >> 8);
+	tm->tm_hour = bcd2bin((time & AT91_RTC_HOUR) >> 16);
+
+	/*
+	 * The Calendar Alarm register does not have a field for
+	 * the year - so these will return an invalid value.  When an
+	 * alarm is set, at91_alarm_year will store the current year.
+	 */
+	tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;	/* century */
+	tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8);	/* year */
+
+	tm->tm_wday = bcd2bin((date & AT91_RTC_DAY) >> 21) - 1;	/* day of the week [0-6], Sunday=0 */
+	tm->tm_mon  = bcd2bin((date & AT91_RTC_MONTH) >> 16) - 1;
+	tm->tm_mday = bcd2bin((date & AT91_RTC_DATE) >> 24);
+}
+
+/*
+ * Read current time and date in RTC
+ */
+static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm);
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_year = tm->tm_year - 1900;
+
+	dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long cr;
+
+	dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	wait_for_completion(&at91_rtc_upd_rdy);
+
+	/* Stop Time/Calendar from counting */
+	cr = at91_rtc_read(AT91_RTC_CR);
+	at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
+
+	at91_rtc_write_ier(AT91_RTC_ACKUPD);
+	wait_for_completion(&at91_rtc_updated);	/* wait for ACKUPD interrupt */
+	at91_rtc_write_idr(AT91_RTC_ACKUPD);
+
+	at91_rtc_write(AT91_RTC_TIMR,
+			  bin2bcd(tm->tm_sec) << 0
+			| bin2bcd(tm->tm_min) << 8
+			| bin2bcd(tm->tm_hour) << 16);
+
+	at91_rtc_write(AT91_RTC_CALR,
+			  bin2bcd((tm->tm_year + 1900) / 100)	/* century */
+			| bin2bcd(tm->tm_year % 100) << 8	/* year */
+			| bin2bcd(tm->tm_mon + 1) << 16		/* tm_mon starts at zero */
+			| bin2bcd(tm->tm_wday + 1) << 21	/* day of the week [0-6], Sunday=0 */
+			| bin2bcd(tm->tm_mday) << 24);
+
+	/* Restart Time/Calendar */
+	cr = at91_rtc_read(AT91_RTC_CR);
+	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_SECEV);
+	at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
+	at91_rtc_write_ier(AT91_RTC_SECEV);
+
+	return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_time *tm = &alrm->time;
+
+	at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm);
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_year = at91_alarm_year - 1900;
+
+	alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM)
+			? 1 : 0;
+
+	dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
+}
+
+/*
+ * Set alarm time and date in RTC
+ */
+static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_time tm;
+
+	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm);
+
+	at91_alarm_year = tm.tm_year;
+
+	tm.tm_mon = alrm->time.tm_mon;
+	tm.tm_mday = alrm->time.tm_mday;
+	tm.tm_hour = alrm->time.tm_hour;
+	tm.tm_min = alrm->time.tm_min;
+	tm.tm_sec = alrm->time.tm_sec;
+
+	at91_rtc_write_idr(AT91_RTC_ALARM);
+	at91_rtc_write(AT91_RTC_TIMALR,
+		  bin2bcd(tm.tm_sec) << 0
+		| bin2bcd(tm.tm_min) << 8
+		| bin2bcd(tm.tm_hour) << 16
+		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
+	at91_rtc_write(AT91_RTC_CALALR,
+		  bin2bcd(tm.tm_mon + 1) << 16		/* tm_mon starts at zero */
+		| bin2bcd(tm.tm_mday) << 24
+		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
+
+	if (alrm->enabled) {
+		at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+		at91_rtc_write_ier(AT91_RTC_ALARM);
+	}
+
+	dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
+		at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
+		tm.tm_min, tm.tm_sec);
+
+	return 0;
+}
+
+static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled);
+
+	if (enabled) {
+		at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+		at91_rtc_write_ier(AT91_RTC_ALARM);
+	} else
+		at91_rtc_write_idr(AT91_RTC_ALARM);
+
+	return 0;
+}
+/*
+ * Provide additional RTC information in /proc/driver/rtc
+ */
+static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	unsigned long imr = at91_rtc_read_imr();
+
+	seq_printf(seq, "update_IRQ\t: %s\n",
+			(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+	seq_printf(seq, "periodic_IRQ\t: %s\n",
+			(imr & AT91_RTC_SECEV) ? "yes" : "no");
+
+	return 0;
+}
+
+/*
+ * IRQ handler for the RTC
+ */
+static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	unsigned int rtsr;
+	unsigned long events = 0;
+	int ret = IRQ_NONE;
+
+	spin_lock(&suspended_lock);
+	rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr();
+	if (rtsr) {		/* this interrupt is shared!  Is it ours? */
+		if (rtsr & AT91_RTC_ALARM)
+			events |= (RTC_AF | RTC_IRQF);
+		if (rtsr & AT91_RTC_SECEV) {
+			complete(&at91_rtc_upd_rdy);
+			at91_rtc_write_idr(AT91_RTC_SECEV);
+		}
+		if (rtsr & AT91_RTC_ACKUPD)
+			complete(&at91_rtc_updated);
+
+		at91_rtc_write(AT91_RTC_SCCR, rtsr);	/* clear status reg */
+
+		if (!suspended) {
+			rtc_update_irq(rtc, 1, events);
+
+			dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n",
+				__func__, events >> 8, events & 0x000000FF);
+		} else {
+			cached_events |= events;
+			at91_rtc_write_idr(at91_rtc_imr);
+			pm_system_wakeup();
+		}
+
+		ret = IRQ_HANDLED;
+	}
+	spin_unlock(&suspended_lock);
+
+	return ret;
+}
+
+static const struct at91_rtc_config at91rm9200_config = {
+};
+
+static const struct at91_rtc_config at91sam9x5_config = {
+	.use_shadow_imr	= true,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id at91_rtc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-rtc",
+		.data = &at91rm9200_config,
+	}, {
+		.compatible = "atmel,at91sam9x5-rtc",
+		.data = &at91sam9x5_config,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
+#endif
+
+static const struct at91_rtc_config *
+at91_rtc_get_config(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+
+	if (pdev->dev.of_node) {
+		match = of_match_node(at91_rtc_dt_ids, pdev->dev.of_node);
+		if (!match)
+			return NULL;
+		return (const struct at91_rtc_config *)match->data;
+	}
+
+	return &at91rm9200_config;
+}
+
+static const struct rtc_class_ops at91_rtc_ops = {
+	.read_time	= at91_rtc_readtime,
+	.set_time	= at91_rtc_settime,
+	.read_alarm	= at91_rtc_readalarm,
+	.set_alarm	= at91_rtc_setalarm,
+	.proc		= at91_rtc_proc,
+	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
+};
+
+/*
+ * Initialize and install RTC driver
+ */
+static int __init at91_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct resource *regs;
+	int ret = 0;
+
+	at91_rtc_config = at91_rtc_get_config(pdev);
+	if (!at91_rtc_config)
+		return -ENODEV;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(&pdev->dev, "no mmio resource defined\n");
+		return -ENXIO;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq resource defined\n");
+		return -ENXIO;
+	}
+
+	at91_rtc_regs = devm_ioremap(&pdev->dev, regs->start,
+				     resource_size(regs));
+	if (!at91_rtc_regs) {
+		dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+		return -ENOMEM;
+	}
+
+	rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+	platform_set_drvdata(pdev, rtc);
+
+	sclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(sclk))
+		return PTR_ERR(sclk);
+
+	ret = clk_prepare_enable(sclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable slow clock\n");
+		return ret;
+	}
+
+	at91_rtc_write(AT91_RTC_CR, 0);
+	at91_rtc_write(AT91_RTC_MR, 0);		/* 24 hour mode */
+
+	/* Disable all interrupts */
+	at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+					AT91_RTC_CALEV);
+
+	ret = devm_request_irq(&pdev->dev, irq, at91_rtc_interrupt,
+			       IRQF_SHARED | IRQF_COND_SUSPEND,
+			       "at91_rtc", pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ %d already in use.\n", irq);
+		goto err_clk;
+	}
+
+	/* cpu init code should really have flagged this device as
+	 * being wake-capable; if it didn't, do that here.
+	 */
+	if (!device_can_wakeup(&pdev->dev))
+		device_init_wakeup(&pdev->dev, 1);
+
+	rtc->ops = &at91_rtc_ops;
+	ret = rtc_register_device(rtc);
+	if (ret)
+		goto err_clk;
+
+	/* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy
+	 * completion.
+	 */
+	at91_rtc_write_ier(AT91_RTC_SECEV);
+
+	dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n");
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(sclk);
+
+	return ret;
+}
+
+/*
+ * Disable and remove the RTC driver
+ */
+static int __exit at91_rtc_remove(struct platform_device *pdev)
+{
+	/* Disable all interrupts */
+	at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+					AT91_RTC_CALEV);
+
+	clk_disable_unprepare(sclk);
+
+	return 0;
+}
+
+static void at91_rtc_shutdown(struct platform_device *pdev)
+{
+	/* Disable all interrupts */
+	at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+					AT91_RTC_SECEV | AT91_RTC_TIMEV |
+					AT91_RTC_CALEV);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+/* AT91RM9200 RTC Power management control */
+
+static int at91_rtc_suspend(struct device *dev)
+{
+	/* this IRQ is shared with DBGU and other hardware which isn't
+	 * necessarily doing PM like we are...
+	 */
+	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+
+	at91_rtc_imr = at91_rtc_read_imr()
+			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
+	if (at91_rtc_imr) {
+		if (device_may_wakeup(dev)) {
+			unsigned long flags;
+
+			enable_irq_wake(irq);
+
+			spin_lock_irqsave(&suspended_lock, flags);
+			suspended = true;
+			spin_unlock_irqrestore(&suspended_lock, flags);
+		} else {
+			at91_rtc_write_idr(at91_rtc_imr);
+		}
+	}
+	return 0;
+}
+
+static int at91_rtc_resume(struct device *dev)
+{
+	struct rtc_device *rtc = dev_get_drvdata(dev);
+
+	if (at91_rtc_imr) {
+		if (device_may_wakeup(dev)) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&suspended_lock, flags);
+
+			if (cached_events) {
+				rtc_update_irq(rtc, 1, cached_events);
+				cached_events = 0;
+			}
+
+			suspended = false;
+			spin_unlock_irqrestore(&suspended_lock, flags);
+
+			disable_irq_wake(irq);
+		}
+		at91_rtc_write_ier(at91_rtc_imr);
+	}
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
+
+static struct platform_driver at91_rtc_driver = {
+	.remove		= __exit_p(at91_rtc_remove),
+	.shutdown	= at91_rtc_shutdown,
+	.driver		= {
+		.name	= "at91_rtc",
+		.pm	= &at91_rtc_pm_ops,
+		.of_match_table = of_match_ptr(at91_rtc_dt_ids),
+	},
+};
+
+module_platform_driver_probe(at91_rtc_driver, at91_rtc_probe);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.h b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.h
new file mode 100644
index 0000000..da1945e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91rm9200.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		0x00			/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		0x04			/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		0x08			/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		0x18			/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
+#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-at91sam9.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91sam9.c
new file mode 100644
index 0000000..7418a76
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-at91sam9.c
@@ -0,0 +1,594 @@
+/*
+ * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
+ *
+ * (C) 2007 Michel Benoit
+ *
+ * Based on rtc-at91rm9200.c by Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/time.h>
+
+/*
+ * This driver uses two configurable hardware resources that live in the
+ * AT91SAM9 backup power domain (intended to be powered at all times)
+ * to implement the Real Time Clock interfaces
+ *
+ *  - A "Real-time Timer" (RTT) counts up in seconds from a base time.
+ *    We can't assign the counter value (CRTV) ... but we can reset it.
+ *
+ *  - One of the "General Purpose Backup Registers" (GPBRs) holds the
+ *    base time, normally an offset from the beginning of the POSIX
+ *    epoch (1970-Jan-1 00:00:00 UTC).  Some systems also include the
+ *    local timezone's offset.
+ *
+ * The RTC's value is the RTT counter plus that offset.  The RTC's alarm
+ * is likewise a base (ALMV) plus that offset.
+ *
+ * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
+ * choose from, or a "real" RTC module.  All systems have multiple GPBR
+ * registers available, likewise usable for more than "RTC" support.
+ */
+
+#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
+#define AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
+#define AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		0x08			/* Real-time Value Register */
+#define AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
+#define AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+/*
+ * We store ALARM_DISABLED in ALMV to record that no alarm is set.
+ * It's also the reset value for that field.
+ */
+#define ALARM_DISABLED	((u32)~0)
+
+
+struct sam9_rtc {
+	void __iomem		*rtt;
+	struct rtc_device	*rtcdev;
+	u32			imr;
+	struct regmap		*gpbr;
+	unsigned int		gpbr_offset;
+	int 			irq;
+	struct clk		*sclk;
+	bool			suspended;
+	unsigned long		events;
+	spinlock_t		lock;
+};
+
+#define rtt_readl(rtc, field) \
+	readl((rtc)->rtt + AT91_RTT_ ## field)
+#define rtt_writel(rtc, field, val) \
+	writel((val), (rtc)->rtt + AT91_RTT_ ## field)
+
+static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
+{
+	unsigned int val;
+
+	regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
+
+	return val;
+}
+
+static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
+{
+	regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
+}
+
+/*
+ * Read current time and date in RTC
+ */
+static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	u32 secs, secs2;
+	u32 offset;
+
+	/* read current time offset */
+	offset = gpbr_readl(rtc);
+	if (offset == 0)
+		return -EILSEQ;
+
+	/* reread the counter to help sync the two clock domains */
+	secs = rtt_readl(rtc, VR);
+	secs2 = rtt_readl(rtc, VR);
+	if (secs != secs2)
+		secs = rtt_readl(rtc, VR);
+
+	rtc_time_to_tm(offset + secs, tm);
+
+	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+	u32 offset, alarm, mr;
+	unsigned long secs;
+
+	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	err = rtc_tm_to_time(tm, &secs);
+	if (err != 0)
+		return err;
+
+	mr = rtt_readl(rtc, MR);
+
+	/* disable interrupts */
+	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
+
+	/* read current time offset */
+	offset = gpbr_readl(rtc);
+
+	/* store the new base time in a battery backup register */
+	secs += 1;
+	gpbr_writel(rtc, secs);
+
+	/* adjust the alarm time for the new base */
+	alarm = rtt_readl(rtc, AR);
+	if (alarm != ALARM_DISABLED) {
+		if (offset > secs) {
+			/* time jumped backwards, increase time until alarm */
+			alarm += (offset - secs);
+		} else if ((alarm + offset) > secs) {
+			/* time jumped forwards, decrease time until alarm */
+			alarm -= (secs - offset);
+		} else {
+			/* time jumped past the alarm, disable alarm */
+			alarm = ALARM_DISABLED;
+			mr &= ~AT91_RTT_ALMIEN;
+		}
+		rtt_writel(rtc, AR, alarm);
+	}
+
+	/* reset the timer, and re-enable interrupts */
+	rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
+
+	return 0;
+}
+
+static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	u32 alarm = rtt_readl(rtc, AR);
+	u32 offset;
+
+	offset = gpbr_readl(rtc);
+	if (offset == 0)
+		return -EILSEQ;
+
+	memset(alrm, 0, sizeof(*alrm));
+	if (alarm != ALARM_DISABLED && offset != 0) {
+		rtc_time_to_tm(offset + alarm, tm);
+
+		dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
+			1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+			tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+		if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
+			alrm->enabled = 1;
+	}
+
+	return 0;
+}
+
+static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned long secs;
+	u32 offset;
+	u32 mr;
+	int err;
+
+	err = rtc_tm_to_time(tm, &secs);
+	if (err != 0)
+		return err;
+
+	offset = gpbr_readl(rtc);
+	if (offset == 0) {
+		/* time is not set */
+		return -EILSEQ;
+	}
+	mr = rtt_readl(rtc, MR);
+	rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
+
+	/* alarm in the past? finish and leave disabled */
+	if (secs <= offset) {
+		rtt_writel(rtc, AR, ALARM_DISABLED);
+		return 0;
+	}
+
+	/* else set alarm and maybe enable it */
+	rtt_writel(rtc, AR, secs - offset);
+	if (alrm->enabled)
+		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
+
+	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
+		tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
+		tm->tm_min, tm->tm_sec);
+
+	return 0;
+}
+
+static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	u32 mr = rtt_readl(rtc, MR);
+
+	dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
+	if (enabled)
+		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
+	else
+		rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
+	return 0;
+}
+
+/*
+ * Provide additional RTC information in /proc/driver/rtc
+ */
+static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct sam9_rtc *rtc = dev_get_drvdata(dev);
+	u32 mr = rtt_readl(rtc, MR);
+
+	seq_printf(seq, "update_IRQ\t: %s\n",
+			(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
+	return 0;
+}
+
+static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
+{
+	u32 sr, mr;
+
+	/* Shared interrupt may be for another device.  Note: reading
+	 * SR clears it, so we must only read it in this irq handler!
+	 */
+	mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+	sr = rtt_readl(rtc, SR) & (mr >> 16);
+	if (!sr)
+		return IRQ_NONE;
+
+	/* alarm status */
+	if (sr & AT91_RTT_ALMS)
+		rtc->events |= (RTC_AF | RTC_IRQF);
+
+	/* timer update/increment */
+	if (sr & AT91_RTT_RTTINC)
+		rtc->events |= (RTC_UF | RTC_IRQF);
+
+	return IRQ_HANDLED;
+}
+
+static void at91_rtc_flush_events(struct sam9_rtc *rtc)
+{
+	if (!rtc->events)
+		return;
+
+	rtc_update_irq(rtc->rtcdev, 1, rtc->events);
+	rtc->events = 0;
+
+	pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
+		rtc->events >> 8, rtc->events & 0x000000FF);
+}
+
+/*
+ * IRQ handler for the RTC
+ */
+static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
+{
+	struct sam9_rtc *rtc = _rtc;
+	int ret;
+
+	spin_lock(&rtc->lock);
+
+	ret = at91_rtc_cache_events(rtc);
+
+	/* We're called in suspended state */
+	if (rtc->suspended) {
+		/* Mask irqs coming from this peripheral */
+		rtt_writel(rtc, MR,
+			   rtt_readl(rtc, MR) &
+			   ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
+		/* Trigger a system wakeup */
+		pm_system_wakeup();
+	} else {
+		at91_rtc_flush_events(rtc);
+	}
+
+	spin_unlock(&rtc->lock);
+
+	return ret;
+}
+
+static const struct rtc_class_ops at91_rtc_ops = {
+	.read_time	= at91_rtc_readtime,
+	.set_time	= at91_rtc_settime,
+	.read_alarm	= at91_rtc_readalarm,
+	.set_alarm	= at91_rtc_setalarm,
+	.proc		= at91_rtc_proc,
+	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
+};
+
+static const struct regmap_config gpbr_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+/*
+ * Initialize and install RTC driver
+ */
+static int at91_rtc_probe(struct platform_device *pdev)
+{
+	struct resource	*r;
+	struct sam9_rtc	*rtc;
+	int		ret, irq;
+	u32		mr;
+	unsigned int	sclk_rate;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get interrupt resource\n");
+		return irq;
+	}
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+	rtc->irq = irq;
+
+	/* platform setup code should have handled this; sigh */
+	if (!device_can_wakeup(&pdev->dev))
+		device_init_wakeup(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(rtc->rtt))
+		return PTR_ERR(rtc->rtt);
+
+	if (!pdev->dev.of_node) {
+		/*
+		 * TODO: Remove this code chunk when removing non DT board
+		 * support. Remember to remove the gpbr_regmap_config
+		 * variable too.
+		 */
+		void __iomem *gpbr;
+
+		r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		gpbr = devm_ioremap_resource(&pdev->dev, r);
+		if (IS_ERR(gpbr))
+			return PTR_ERR(gpbr);
+
+		rtc->gpbr = regmap_init_mmio(NULL, gpbr,
+					     &gpbr_regmap_config);
+	} else {
+		struct of_phandle_args args;
+
+		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						"atmel,rtt-rtc-time-reg", 1, 0,
+						&args);
+		if (ret)
+			return ret;
+
+		rtc->gpbr = syscon_node_to_regmap(args.np);
+		rtc->gpbr_offset = args.args[0];
+	}
+
+	if (IS_ERR(rtc->gpbr)) {
+		dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
+		return -ENOMEM;
+	}
+
+	rtc->sclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtc->sclk))
+		return PTR_ERR(rtc->sclk);
+
+	ret = clk_prepare_enable(rtc->sclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable slow clock\n");
+		return ret;
+	}
+
+	sclk_rate = clk_get_rate(rtc->sclk);
+	if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
+		dev_err(&pdev->dev, "Invalid slow clock rate\n");
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
+	mr = rtt_readl(rtc, MR);
+
+	/* unless RTT is counting at 1 Hz, re-initialize it */
+	if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
+		mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
+		gpbr_writel(rtc, 0);
+	}
+
+	/* disable all interrupts (same as on shutdown path) */
+	mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+	rtt_writel(rtc, MR, mr);
+
+	rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&at91_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtcdev)) {
+		ret = PTR_ERR(rtc->rtcdev);
+		goto err_clk;
+	}
+
+	/* register irq handler after we know what name we'll use */
+	ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
+			       IRQF_SHARED | IRQF_COND_SUSPEND,
+			       dev_name(&rtc->rtcdev->dev), rtc);
+	if (ret) {
+		dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
+		goto err_clk;
+	}
+
+	/* NOTE:  sam9260 rev A silicon has a ROM bug which resets the
+	 * RTT on at least some reboots.  If you have that chip, you must
+	 * initialize the time from some external source like a GPS, wall
+	 * clock, discrete RTC, etc
+	 */
+
+	if (gpbr_readl(rtc) == 0)
+		dev_warn(&pdev->dev, "%s: SET TIME!\n",
+				dev_name(&rtc->rtcdev->dev));
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(rtc->sclk);
+
+	return ret;
+}
+
+/*
+ * Disable and remove the RTC driver
+ */
+static int at91_rtc_remove(struct platform_device *pdev)
+{
+	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
+	u32		mr = rtt_readl(rtc, MR);
+
+	/* disable all interrupts */
+	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
+
+	clk_disable_unprepare(rtc->sclk);
+
+	return 0;
+}
+
+static void at91_rtc_shutdown(struct platform_device *pdev)
+{
+	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
+	u32		mr = rtt_readl(rtc, MR);
+
+	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+	rtt_writel(rtc, MR, mr & ~rtc->imr);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+/* AT91SAM9 RTC Power management control */
+
+static int at91_rtc_suspend(struct device *dev)
+{
+	struct sam9_rtc	*rtc = dev_get_drvdata(dev);
+	u32		mr = rtt_readl(rtc, MR);
+
+	/*
+	 * This IRQ is shared with DBGU and other hardware which isn't
+	 * necessarily a wakeup event source.
+	 */
+	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+	if (rtc->imr) {
+		if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
+			unsigned long flags;
+
+			enable_irq_wake(rtc->irq);
+			spin_lock_irqsave(&rtc->lock, flags);
+			rtc->suspended = true;
+			spin_unlock_irqrestore(&rtc->lock, flags);
+			/* don't let RTTINC cause wakeups */
+			if (mr & AT91_RTT_RTTINCIEN)
+				rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
+		} else
+			rtt_writel(rtc, MR, mr & ~rtc->imr);
+	}
+
+	return 0;
+}
+
+static int at91_rtc_resume(struct device *dev)
+{
+	struct sam9_rtc	*rtc = dev_get_drvdata(dev);
+	u32		mr;
+
+	if (rtc->imr) {
+		unsigned long flags;
+
+		if (device_may_wakeup(dev))
+			disable_irq_wake(rtc->irq);
+		mr = rtt_readl(rtc, MR);
+		rtt_writel(rtc, MR, mr | rtc->imr);
+
+		spin_lock_irqsave(&rtc->lock, flags);
+		rtc->suspended = false;
+		at91_rtc_cache_events(rtc);
+		at91_rtc_flush_events(rtc);
+		spin_unlock_irqrestore(&rtc->lock, flags);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id at91_rtc_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9260-rtt" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
+#endif
+
+static struct platform_driver at91_rtc_driver = {
+	.probe		= at91_rtc_probe,
+	.remove		= at91_rtc_remove,
+	.shutdown	= at91_rtc_shutdown,
+	.driver		= {
+		.name	= "rtc-at91sam9",
+		.pm	= &at91_rtc_pm_ops,
+		.of_match_table = of_match_ptr(at91_rtc_dt_ids),
+	},
+};
+
+module_platform_driver(at91_rtc_driver);
+
+MODULE_AUTHOR("Michel Benoit");
+MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-au1xxx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-au1xxx.c
new file mode 100644
index 0000000..2ba44cc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-au1xxx.c
@@ -0,0 +1,128 @@
+/*
+ * Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver.
+ *
+ * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz
+ * crystal. Counter 0, which keeps counting during sleep/powerdown, is
+ * used to count seconds since the beginning of the unix epoch.
+ *
+ * The counters must be configured and enabled by bootloader/board code;
+ * no checks as to whether they really get a proper 32.768kHz clock are
+ * made as this would take far too long.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
+
+static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long t;
+
+	t = alchemy_rdsys(AU1000_SYS_TOYREAD);
+
+	rtc_time_to_tm(t, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long t;
+
+	rtc_tm_to_time(tm, &t);
+
+	alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
+
+	/* wait for the pending register write to succeed.  This can
+	 * take up to 6 seconds...
+	 */
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
+		msleep(1);
+
+	return 0;
+}
+
+static const struct rtc_class_ops au1xtoy_rtc_ops = {
+	.read_time	= au1xtoy_rtc_read_time,
+	.set_time	= au1xtoy_rtc_set_time,
+};
+
+static int au1xtoy_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtcdev;
+	unsigned long t;
+	int ret;
+
+	t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
+	if (!(t & CNTR_OK)) {
+		dev_err(&pdev->dev, "counters not working; aborting.\n");
+		ret = -ENODEV;
+		goto out_err;
+	}
+
+	ret = -ETIMEDOUT;
+
+	/* set counter0 tickrate to 1Hz if necessary */
+	if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
+		/* wait until hardware gives access to TRIM register */
+		t = 0x00100000;
+		while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T0S) && --t)
+			msleep(1);
+
+		if (!t) {
+			/* timed out waiting for register access; assume
+			 * counters are unusable.
+			 */
+			dev_err(&pdev->dev, "timeout waiting for access\n");
+			goto out_err;
+		}
+
+		/* set 1Hz TOY tick rate */
+		alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
+	}
+
+	/* wait until the hardware allows writes to the counter reg */
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
+		msleep(1);
+
+	rtcdev = devm_rtc_device_register(&pdev->dev, "rtc-au1xxx",
+				     &au1xtoy_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtcdev)) {
+		ret = PTR_ERR(rtcdev);
+		goto out_err;
+	}
+
+	platform_set_drvdata(pdev, rtcdev);
+
+	return 0;
+
+out_err:
+	return ret;
+}
+
+static struct platform_driver au1xrtc_driver = {
+	.driver		= {
+		.name	= "rtc-au1xxx",
+	},
+};
+
+module_platform_driver_probe(au1xrtc_driver, au1xtoy_rtc_probe);
+
+MODULE_DESCRIPTION("Au1xxx TOY-counter-based RTC driver");
+MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-au1xxx");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-bfin.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-bfin.c
new file mode 100644
index 0000000..15344b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-bfin.c
@@ -0,0 +1,448 @@
+/*
+ * Blackfin On-Chip Real Time Clock Driver
+ *  Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The biggest issue we deal with in this driver is that register writes are
+ * synced to the RTC frequency of 1Hz.  So if you write to a register and
+ * attempt to write again before the first write has completed, the new write
+ * is simply discarded.  This can easily be troublesome if userspace disables
+ * one event (say periodic) and then right after enables an event (say alarm).
+ * Since all events are maintained in the same interrupt mask register, if
+ * we wrote to it to disable the first event and then wrote to it again to
+ * enable the second event, that second event would not be enabled as the
+ * write would be discarded and things quickly fall apart.
+ *
+ * To keep this delay from significantly degrading performance (we, in theory,
+ * would have to sleep for up to 1 second every time we wanted to write a
+ * register), we only check the write pending status before we start to issue
+ * a new write.  We bank on the idea that it doesn't matter when the sync
+ * happens so long as we don't attempt another write before it does.  The only
+ * time userspace would take this penalty is when they try and do multiple
+ * operations right after another ... but in this case, they need to take the
+ * sync penalty, so we should be OK.
+ *
+ * Also note that the RTC_ISTAT register does not suffer this penalty; its
+ * writes to clear status registers complete immediately.
+ */
+
+/* It may seem odd that there is no SWCNT code in here (which would be exposed
+ * via the periodic interrupt event, or PIE).  Since the Blackfin RTC peripheral
+ * runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ
+ * (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs.
+ * The same exact behavior can be accomplished by using the update interrupt
+ * event (UIE).  Maybe down the line the RTC peripheral will suck less in which
+ * case we can re-introduce PIE support.
+ */
+
+#include <linux/bcd.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <asm/blackfin.h>
+
+#define dev_dbg_stamp(dev) dev_dbg(dev, "%s:%i: here i am\n", __func__, __LINE__)
+
+struct bfin_rtc {
+	struct rtc_device *rtc_dev;
+	struct rtc_time rtc_alarm;
+	u16 rtc_wrote_regs;
+};
+
+/* Bit values for the ISTAT / ICTL registers */
+#define RTC_ISTAT_WRITE_COMPLETE  0x8000
+#define RTC_ISTAT_WRITE_PENDING   0x4000
+#define RTC_ISTAT_ALARM_DAY       0x0040
+#define RTC_ISTAT_24HR            0x0020
+#define RTC_ISTAT_HOUR            0x0010
+#define RTC_ISTAT_MIN             0x0008
+#define RTC_ISTAT_SEC             0x0004
+#define RTC_ISTAT_ALARM           0x0002
+#define RTC_ISTAT_STOPWATCH       0x0001
+
+/* Shift values for RTC_STAT register */
+#define DAY_BITS_OFF    17
+#define HOUR_BITS_OFF   12
+#define MIN_BITS_OFF    6
+#define SEC_BITS_OFF    0
+
+/* Some helper functions to convert between the common RTC notion of time
+ * and the internal Blackfin notion that is encoded in 32bits.
+ */
+static inline u32 rtc_time_to_bfin(unsigned long now)
+{
+	u32 sec  = (now % 60);
+	u32 min  = (now % (60 * 60)) / 60;
+	u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
+	u32 days = (now / (60 * 60 * 24));
+	return (sec  << SEC_BITS_OFF) +
+	       (min  << MIN_BITS_OFF) +
+	       (hour << HOUR_BITS_OFF) +
+	       (days << DAY_BITS_OFF);
+}
+static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
+{
+	return (((rtc_bfin >> SEC_BITS_OFF)  & 0x003F)) +
+	       (((rtc_bfin >> MIN_BITS_OFF)  & 0x003F) * 60) +
+	       (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
+	       (((rtc_bfin >> DAY_BITS_OFF)  & 0x7FFF) * 60 * 60 * 24);
+}
+static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
+{
+	rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
+}
+
+/**
+ *	bfin_rtc_sync_pending - make sure pending writes have complete
+ *
+ * Wait for the previous write to a RTC register to complete.
+ * Unfortunately, we can't sleep here as that introduces a race condition when
+ * turning on interrupt events.  Consider this:
+ *  - process sets alarm
+ *  - process enables alarm
+ *  - process sleeps while waiting for rtc write to sync
+ *  - interrupt fires while process is sleeping
+ *  - interrupt acks the event by writing to ISTAT
+ *  - interrupt sets the WRITE PENDING bit
+ *  - interrupt handler finishes
+ *  - process wakes up, sees WRITE PENDING bit set, goes to sleep
+ *  - interrupt fires while process is sleeping
+ * If anyone can point out the obvious solution here, i'm listening :).  This
+ * shouldn't be an issue on an SMP or preempt system as this function should
+ * only be called with the rtc lock held.
+ *
+ * Other options:
+ *  - disable PREN so the sync happens at 32.768kHZ ... but this changes the
+ *    inc rate for all RTC registers from 1HZ to 32.768kHZ ...
+ *  - use the write complete IRQ
+ */
+/*
+static void bfin_rtc_sync_pending_polled(void)
+{
+	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE))
+		if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
+			break;
+	bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
+}
+*/
+static DECLARE_COMPLETION(bfin_write_complete);
+static void bfin_rtc_sync_pending(struct device *dev)
+{
+	dev_dbg_stamp(dev);
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		wait_for_completion_timeout(&bfin_write_complete, HZ * 5);
+	dev_dbg_stamp(dev);
+}
+
+/**
+ *	bfin_rtc_reset - set RTC to sane/known state
+ *
+ * Initialize the RTC.  Enable pre-scaler to scale RTC clock
+ * to 1Hz and clear interrupt/status registers.
+ */
+static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	dev_dbg_stamp(dev);
+	bfin_rtc_sync_pending(dev);
+	bfin_write_RTC_PREN(0x1);
+	bfin_write_RTC_ICTL(rtc_ictl);
+	bfin_write_RTC_ALARM(0);
+	bfin_write_RTC_ISTAT(0xFFFF);
+	rtc->rtc_wrote_regs = 0;
+}
+
+/**
+ *	bfin_rtc_interrupt - handle interrupt from RTC
+ *
+ * Since we handle all RTC events here, we have to make sure the requested
+ * interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT)
+ * always gets updated regardless of the interrupt being enabled.  So when one
+ * even we care about (e.g. stopwatch) goes off, we don't want to turn around
+ * and say that other events have happened as well (e.g. second).  We do not
+ * have to worry about pending writes to the RTC_ICTL register as interrupts
+ * only fire if they are enabled in the RTC_ICTL register.
+ */
+static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long events = 0;
+	bool write_complete = false;
+	u16 rtc_istat, rtc_istat_clear, rtc_ictl, bits;
+
+	dev_dbg_stamp(dev);
+
+	rtc_istat = bfin_read_RTC_ISTAT();
+	rtc_ictl = bfin_read_RTC_ICTL();
+	rtc_istat_clear = 0;
+
+	bits = RTC_ISTAT_WRITE_COMPLETE;
+	if (rtc_istat & bits) {
+		rtc_istat_clear |= bits;
+		write_complete = true;
+		complete(&bfin_write_complete);
+	}
+
+	bits = (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
+	if (rtc_ictl & bits) {
+		if (rtc_istat & bits) {
+			rtc_istat_clear |= bits;
+			events |= RTC_AF | RTC_IRQF;
+		}
+	}
+
+	bits = RTC_ISTAT_SEC;
+	if (rtc_ictl & bits) {
+		if (rtc_istat & bits) {
+			rtc_istat_clear |= bits;
+			events |= RTC_UF | RTC_IRQF;
+		}
+	}
+
+	if (events)
+		rtc_update_irq(rtc->rtc_dev, 1, events);
+
+	if (write_complete || events) {
+		bfin_write_RTC_ISTAT(rtc_istat_clear);
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+}
+
+static void bfin_rtc_int_set(u16 rtc_int)
+{
+	bfin_write_RTC_ISTAT(rtc_int);
+	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
+}
+static void bfin_rtc_int_clear(u16 rtc_int)
+{
+	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
+}
+static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
+{
+	/* Blackfin has different bits for whether the alarm is
+	 * more than 24 hours away.
+	 */
+	bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY);
+}
+
+static int bfin_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+	dev_dbg_stamp(dev);
+	if (enabled)
+		bfin_rtc_int_set_alarm(rtc);
+	else
+		bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+
+	return 0;
+}
+
+static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+	dev_dbg_stamp(dev);
+
+	if (rtc->rtc_wrote_regs & 0x1)
+		bfin_rtc_sync_pending(dev);
+
+	rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
+
+	return 0;
+}
+
+static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+	unsigned long now;
+
+	dev_dbg_stamp(dev);
+
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0) {
+		if (rtc->rtc_wrote_regs & 0x1)
+			bfin_rtc_sync_pending(dev);
+		bfin_write_RTC_STAT(rtc_time_to_bfin(now));
+		rtc->rtc_wrote_regs = 0x1;
+	}
+
+	return ret;
+}
+
+static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	dev_dbg_stamp(dev);
+	alrm->time = rtc->rtc_alarm;
+	bfin_rtc_sync_pending(dev);
+	alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+	return 0;
+}
+
+static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long rtc_alarm;
+
+	dev_dbg_stamp(dev);
+
+	if (rtc_tm_to_time(&alrm->time, &rtc_alarm))
+		return -EINVAL;
+
+	rtc->rtc_alarm = alrm->time;
+
+	bfin_rtc_sync_pending(dev);
+	bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
+	if (alrm->enabled)
+		bfin_rtc_int_set_alarm(rtc);
+
+	return 0;
+}
+
+static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+#define yesno(x) ((x) ? "yes" : "no")
+	u16 ictl = bfin_read_RTC_ICTL();
+	dev_dbg_stamp(dev);
+	seq_printf(seq,
+		"alarm_IRQ\t: %s\n"
+		"wkalarm_IRQ\t: %s\n"
+		"seconds_IRQ\t: %s\n",
+		yesno(ictl & RTC_ISTAT_ALARM),
+		yesno(ictl & RTC_ISTAT_ALARM_DAY),
+		yesno(ictl & RTC_ISTAT_SEC));
+	return 0;
+#undef yesno
+}
+
+static const struct rtc_class_ops bfin_rtc_ops = {
+	.read_time     = bfin_rtc_read_time,
+	.set_time      = bfin_rtc_set_time,
+	.read_alarm    = bfin_rtc_read_alarm,
+	.set_alarm     = bfin_rtc_set_alarm,
+	.proc          = bfin_rtc_proc,
+	.alarm_irq_enable = bfin_rtc_alarm_irq_enable,
+};
+
+static int bfin_rtc_probe(struct platform_device *pdev)
+{
+	struct bfin_rtc *rtc;
+	struct device *dev = &pdev->dev;
+	int ret;
+	unsigned long timeout = jiffies + HZ;
+
+	dev_dbg_stamp(dev);
+
+	/* Allocate memory for our RTC struct */
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+	if (unlikely(!rtc))
+		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
+	device_init_wakeup(dev, 1);
+
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = devm_rtc_device_register(dev, pdev->name, &bfin_rtc_ops,
+						THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	/* Grab the IRQ and init the hardware */
+	ret = devm_request_irq(dev, IRQ_RTC, bfin_rtc_interrupt, 0,
+				pdev->name, dev);
+	if (unlikely(ret))
+		dev_err(&pdev->dev,
+			"unable to request IRQ; alarm won't work, "
+			"and writes will be delayed\n");
+
+	/* sometimes the bootloader touched things, but the write complete was not
+	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+	 */
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		if (time_after(jiffies, timeout))
+			break;
+	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
+	bfin_write_RTC_SWCNT(0);
+
+	return 0;
+}
+
+static int bfin_rtc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	bfin_rtc_reset(dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bfin_rtc_suspend(struct device *dev)
+{
+	dev_dbg_stamp(dev);
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(IRQ_RTC);
+		bfin_rtc_sync_pending(dev);
+	} else
+		bfin_rtc_int_clear(0);
+
+	return 0;
+}
+
+static int bfin_rtc_resume(struct device *dev)
+{
+	dev_dbg_stamp(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(IRQ_RTC);
+
+	/*
+	 * Since only some of the RTC bits are maintained externally in the
+	 * Vbat domain, we need to wait for the RTC MMRs to be synced into
+	 * the core after waking up.  This happens every RTC 1HZ.  Once that
+	 * has happened, we can go ahead and re-enable the important write
+	 * complete interrupt event.
+	 */
+	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_SEC))
+		continue;
+	bfin_rtc_int_set(RTC_ISTAT_WRITE_COMPLETE);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bfin_rtc_pm_ops, bfin_rtc_suspend, bfin_rtc_resume);
+
+static struct platform_driver bfin_rtc_driver = {
+	.driver		= {
+		.name	= "rtc-bfin",
+		.pm	= &bfin_rtc_pm_ops,
+	},
+	.probe		= bfin_rtc_probe,
+	.remove		= bfin_rtc_remove,
+};
+
+module_platform_driver(bfin_rtc_driver);
+
+MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-bfin");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-bq32k.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-bq32k.c
new file mode 100644
index 0000000..98ac8d5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-bq32k.c
@@ -0,0 +1,333 @@
+/*
+ * Driver for TI BQ32000 RTC.
+ *
+ * Copyright (C) 2009 Semihalf.
+ * Copyright (C) 2014 Pavel Machek <pavel@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You can get hardware description at
+ * http://www.ti.com/lit/ds/symlink/bq32000.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/bcd.h>
+
+#define BQ32K_SECONDS		0x00	/* Seconds register address */
+#define BQ32K_SECONDS_MASK	0x7F	/* Mask over seconds value */
+#define BQ32K_STOP		0x80	/* Oscillator Stop flat */
+
+#define BQ32K_MINUTES		0x01	/* Minutes register address */
+#define BQ32K_MINUTES_MASK	0x7F	/* Mask over minutes value */
+#define BQ32K_OF		0x80	/* Oscillator Failure flag */
+
+#define BQ32K_HOURS_MASK	0x3F	/* Mask over hours value */
+#define BQ32K_CENT		0x40	/* Century flag */
+#define BQ32K_CENT_EN		0x80	/* Century flag enable bit */
+
+#define BQ32K_CALIBRATION	0x07	/* CAL_CFG1, calibration and control */
+#define BQ32K_TCH2		0x08	/* Trickle charge enable */
+#define BQ32K_CFG2		0x09	/* Trickle charger control */
+#define BQ32K_TCFE		BIT(6)	/* Trickle charge FET bypass */
+
+struct bq32k_regs {
+	uint8_t		seconds;
+	uint8_t		minutes;
+	uint8_t		cent_hours;
+	uint8_t		day;
+	uint8_t		date;
+	uint8_t		month;
+	uint8_t		years;
+};
+
+static struct i2c_driver bq32k_driver;
+
+static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &off,
+		}, {
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = data,
+		}
+	};
+
+	if (i2c_transfer(client->adapter, msgs, 2) == 2)
+		return 0;
+
+	return -EIO;
+}
+
+static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	uint8_t buffer[len + 1];
+
+	buffer[0] = off;
+	memcpy(&buffer[1], data, len);
+
+	if (i2c_master_send(client, buffer, len + 1) == len + 1)
+		return 0;
+
+	return -EIO;
+}
+
+static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct bq32k_regs regs;
+	int error;
+
+	error = bq32k_read(dev, &regs, 0, sizeof(regs));
+	if (error)
+		return error;
+
+	/*
+	 * In case of oscillator failure, the register contents should be
+	 * considered invalid. The flag is cleared the next time the RTC is set.
+	 */
+	if (regs.minutes & BQ32K_OF)
+		return -EINVAL;
+
+	tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK);
+	tm->tm_min = bcd2bin(regs.minutes & BQ32K_MINUTES_MASK);
+	tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK);
+	tm->tm_mday = bcd2bin(regs.date);
+	tm->tm_wday = bcd2bin(regs.day) - 1;
+	tm->tm_mon = bcd2bin(regs.month) - 1;
+	tm->tm_year = bcd2bin(regs.years) +
+				((regs.cent_hours & BQ32K_CENT) ? 100 : 0);
+
+	return rtc_valid_tm(tm);
+}
+
+static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct bq32k_regs regs;
+
+	regs.seconds = bin2bcd(tm->tm_sec);
+	regs.minutes = bin2bcd(tm->tm_min);
+	regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN;
+	regs.day = bin2bcd(tm->tm_wday + 1);
+	regs.date = bin2bcd(tm->tm_mday);
+	regs.month = bin2bcd(tm->tm_mon + 1);
+
+	if (tm->tm_year >= 100) {
+		regs.cent_hours |= BQ32K_CENT;
+		regs.years = bin2bcd(tm->tm_year - 100);
+	} else
+		regs.years = bin2bcd(tm->tm_year);
+
+	return bq32k_write(dev, &regs, 0, sizeof(regs));
+}
+
+static const struct rtc_class_ops bq32k_rtc_ops = {
+	.read_time	= bq32k_rtc_read_time,
+	.set_time	= bq32k_rtc_set_time,
+};
+
+static int trickle_charger_of_init(struct device *dev, struct device_node *node)
+{
+	unsigned char reg;
+	int error;
+	u32 ohms = 0;
+
+	if (of_property_read_u32(node, "trickle-resistor-ohms" , &ohms))
+		return 0;
+
+	switch (ohms) {
+	case 180+940:
+		/*
+		 * TCHE[3:0] == 0x05, TCH2 == 1, TCFE == 0 (charging
+		 * over diode and 940ohm resistor)
+		 */
+
+		if (of_property_read_bool(node, "trickle-diode-disable")) {
+			dev_err(dev, "diode and resistor mismatch\n");
+			return -EINVAL;
+		}
+		reg = 0x05;
+		break;
+
+	case 180+20000:
+		/* diode disabled */
+
+		if (!of_property_read_bool(node, "trickle-diode-disable")) {
+			dev_err(dev, "bq32k: diode and resistor mismatch\n");
+			return -EINVAL;
+		}
+		reg = 0x45;
+		break;
+
+	default:
+		dev_err(dev, "invalid resistor value (%d)\n", ohms);
+		return -EINVAL;
+	}
+
+	error = bq32k_write(dev, &reg, BQ32K_CFG2, 1);
+	if (error)
+		return error;
+
+	reg = 0x20;
+	error = bq32k_write(dev, &reg, BQ32K_TCH2, 1);
+	if (error)
+		return error;
+
+	dev_info(dev, "Enabled trickle RTC battery charge.\n");
+	return 0;
+}
+
+static ssize_t bq32k_sysfs_show_tricklecharge_bypass(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	int reg, error;
+
+	error = bq32k_read(dev, &reg, BQ32K_CFG2, 1);
+	if (error)
+		return error;
+
+	return sprintf(buf, "%d\n", (reg & BQ32K_TCFE) ? 1 : 0);
+}
+
+static ssize_t bq32k_sysfs_store_tricklecharge_bypass(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	int reg, enable, error;
+
+	if (kstrtoint(buf, 0, &enable))
+		return -EINVAL;
+
+	error = bq32k_read(dev, &reg, BQ32K_CFG2, 1);
+	if (error)
+		return error;
+
+	if (enable) {
+		reg |= BQ32K_TCFE;
+		error = bq32k_write(dev, &reg, BQ32K_CFG2, 1);
+		if (error)
+			return error;
+
+		dev_info(dev, "Enabled trickle charge FET bypass.\n");
+	} else {
+		reg &= ~BQ32K_TCFE;
+		error = bq32k_write(dev, &reg, BQ32K_CFG2, 1);
+		if (error)
+			return error;
+
+		dev_info(dev, "Disabled trickle charge FET bypass.\n");
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(trickle_charge_bypass, 0644,
+		   bq32k_sysfs_show_tricklecharge_bypass,
+		   bq32k_sysfs_store_tricklecharge_bypass);
+
+static int bq32k_sysfs_register(struct device *dev)
+{
+	return device_create_file(dev, &dev_attr_trickle_charge_bypass);
+}
+
+static void bq32k_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_trickle_charge_bypass);
+}
+
+static int bq32k_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct rtc_device *rtc;
+	uint8_t reg;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	/* Check Oscillator Stop flag */
+	error = bq32k_read(dev, &reg, BQ32K_SECONDS, 1);
+	if (!error && (reg & BQ32K_STOP)) {
+		dev_warn(dev, "Oscillator was halted. Restarting...\n");
+		reg &= ~BQ32K_STOP;
+		error = bq32k_write(dev, &reg, BQ32K_SECONDS, 1);
+	}
+	if (error)
+		return error;
+
+	/* Check Oscillator Failure flag */
+	error = bq32k_read(dev, &reg, BQ32K_MINUTES, 1);
+	if (error)
+		return error;
+	if (reg & BQ32K_OF)
+		dev_warn(dev, "Oscillator Failure. Check RTC battery.\n");
+
+	if (client->dev.of_node)
+		trickle_charger_of_init(dev, client->dev.of_node);
+
+	rtc = devm_rtc_device_register(&client->dev, bq32k_driver.driver.name,
+						&bq32k_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	error = bq32k_sysfs_register(&client->dev);
+	if (error) {
+		dev_err(&client->dev,
+			"Unable to create sysfs entries for rtc bq32000\n");
+		return error;
+	}
+
+
+	i2c_set_clientdata(client, rtc);
+
+	return 0;
+}
+
+static int bq32k_remove(struct i2c_client *client)
+{
+	bq32k_sysfs_unregister(&client->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id bq32k_id[] = {
+	{ "bq32000", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bq32k_id);
+
+static const struct of_device_id bq32k_of_match[] = {
+	{ .compatible = "ti,bq32000" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bq32k_of_match);
+
+static struct i2c_driver bq32k_driver = {
+	.driver = {
+		.name	= "bq32k",
+		.of_match_table = of_match_ptr(bq32k_of_match),
+	},
+	.probe		= bq32k_probe,
+	.remove		= bq32k_remove,
+	.id_table	= bq32k_id,
+};
+
+module_i2c_driver(bq32k_driver);
+
+MODULE_AUTHOR("Semihalf, Piotr Ziecik <kosmo@semihalf.com>");
+MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-bq4802.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-bq4802.c
new file mode 100644
index 0000000..5747a54
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-bq4802.c
@@ -0,0 +1,203 @@
+/* rtc-bq4802.c: TI BQ4802 RTC driver.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_DESCRIPTION("TI BQ4802 RTC driver");
+MODULE_LICENSE("GPL");
+
+struct bq4802 {
+	void __iomem		*regs;
+	unsigned long		ioport;
+	struct rtc_device	*rtc;
+	spinlock_t		lock;
+	struct resource		*r;
+	u8 (*read)(struct bq4802 *, int);
+	void (*write)(struct bq4802 *, int, u8);
+};
+
+static u8 bq4802_read_io(struct bq4802 *p, int off)
+{
+	return inb(p->ioport + off);
+}
+
+static void bq4802_write_io(struct bq4802 *p, int off, u8 val)
+{
+	outb(val, p->ioport + off);
+}
+
+static u8 bq4802_read_mem(struct bq4802 *p, int off)
+{
+	return readb(p->regs + off);
+}
+
+static void bq4802_write_mem(struct bq4802 *p, int off, u8 val)
+{
+	writeb(val, p->regs + off);
+}
+
+static int bq4802_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bq4802 *p = platform_get_drvdata(pdev);
+	unsigned long flags;
+	unsigned int century;
+	u8 val;
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	val = p->read(p, 0x0e);
+	p->write(p, 0xe, val | 0x08);
+
+	tm->tm_sec = p->read(p, 0x00);
+	tm->tm_min = p->read(p, 0x02);
+	tm->tm_hour = p->read(p, 0x04);
+	tm->tm_mday = p->read(p, 0x06);
+	tm->tm_mon = p->read(p, 0x09);
+	tm->tm_year = p->read(p, 0x0a);
+	tm->tm_wday = p->read(p, 0x08);
+	century = p->read(p, 0x0f);
+
+	p->write(p, 0x0e, val);
+
+	spin_unlock_irqrestore(&p->lock, flags);
+
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
+	tm->tm_year = bcd2bin(tm->tm_year);
+	tm->tm_wday = bcd2bin(tm->tm_wday);
+	century = bcd2bin(century);
+
+	tm->tm_year += (century * 100);
+	tm->tm_year -= 1900;
+
+	tm->tm_mon--;
+
+	return 0;
+}
+
+static int bq4802_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bq4802 *p = platform_get_drvdata(pdev);
+	u8 sec, min, hrs, day, mon, yrs, century, val;
+	unsigned long flags;
+	unsigned int year;
+
+	year = tm->tm_year + 1900;
+	century = year / 100;
+	yrs = year % 100;
+
+	mon = tm->tm_mon + 1;   /* tm_mon starts at zero */
+	day = tm->tm_mday;
+	hrs = tm->tm_hour;
+	min = tm->tm_min;
+	sec = tm->tm_sec;
+
+	sec = bin2bcd(sec);
+	min = bin2bcd(min);
+	hrs = bin2bcd(hrs);
+	day = bin2bcd(day);
+	mon = bin2bcd(mon);
+	yrs = bin2bcd(yrs);
+	century = bin2bcd(century);
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	val = p->read(p, 0x0e);
+	p->write(p, 0x0e, val | 0x08);
+
+	p->write(p, 0x00, sec);
+	p->write(p, 0x02, min);
+	p->write(p, 0x04, hrs);
+	p->write(p, 0x06, day);
+	p->write(p, 0x09, mon);
+	p->write(p, 0x0a, yrs);
+	p->write(p, 0x0f, century);
+
+	p->write(p, 0x0e, val);
+
+	spin_unlock_irqrestore(&p->lock, flags);
+
+	return 0;
+}
+
+static const struct rtc_class_ops bq4802_ops = {
+	.read_time	= bq4802_read_time,
+	.set_time	= bq4802_set_time,
+};
+
+static int bq4802_probe(struct platform_device *pdev)
+{
+	struct bq4802 *p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	int err = -ENOMEM;
+
+	if (!p)
+		goto out;
+
+	spin_lock_init(&p->lock);
+
+	p->r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!p->r) {
+		p->r = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		err = -EINVAL;
+		if (!p->r)
+			goto out;
+	}
+	if (p->r->flags & IORESOURCE_IO) {
+		p->ioport = p->r->start;
+		p->read = bq4802_read_io;
+		p->write = bq4802_write_io;
+	} else if (p->r->flags & IORESOURCE_MEM) {
+		p->regs = devm_ioremap(&pdev->dev, p->r->start,
+					resource_size(p->r));
+		if (!p->regs){
+			err = -ENOMEM;
+			goto out;
+		}
+		p->read = bq4802_read_mem;
+		p->write = bq4802_write_mem;
+	} else {
+		err = -EINVAL;
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	p->rtc = devm_rtc_device_register(&pdev->dev, "bq4802",
+					&bq4802_ops, THIS_MODULE);
+	if (IS_ERR(p->rtc)) {
+		err = PTR_ERR(p->rtc);
+		goto out;
+	}
+
+	err = 0;
+out:
+	return err;
+
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-bq4802");
+
+static struct platform_driver bq4802_driver = {
+	.driver		= {
+		.name	= "rtc-bq4802",
+	},
+	.probe		= bq4802_probe,
+};
+
+module_platform_driver(bq4802_driver);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-brcmstb-waketimer.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-brcmstb-waketimer.c
new file mode 100644
index 0000000..6cee612
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-brcmstb-waketimer.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_wakeup.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/stat.h>
+#include <linux/suspend.h>
+
+struct brcmstb_waketmr {
+	struct rtc_device *rtc;
+	struct device *dev;
+	void __iomem *base;
+	int irq;
+	struct notifier_block reboot_notifier;
+	struct clk *clk;
+	u32 rate;
+};
+
+#define BRCMSTB_WKTMR_EVENT		0x00
+#define BRCMSTB_WKTMR_COUNTER		0x04
+#define BRCMSTB_WKTMR_ALARM		0x08
+#define BRCMSTB_WKTMR_PRESCALER		0x0C
+#define BRCMSTB_WKTMR_PRESCALER_VAL	0x10
+
+#define BRCMSTB_WKTMR_DEFAULT_FREQ	27000000
+
+static inline void brcmstb_waketmr_clear_alarm(struct brcmstb_waketmr *timer)
+{
+	writel_relaxed(1, timer->base + BRCMSTB_WKTMR_EVENT);
+	(void)readl_relaxed(timer->base + BRCMSTB_WKTMR_EVENT);
+}
+
+static void brcmstb_waketmr_set_alarm(struct brcmstb_waketmr *timer,
+				      unsigned int secs)
+{
+	brcmstb_waketmr_clear_alarm(timer);
+
+	writel_relaxed(secs + 1, timer->base + BRCMSTB_WKTMR_ALARM);
+}
+
+static irqreturn_t brcmstb_waketmr_irq(int irq, void *data)
+{
+	struct brcmstb_waketmr *timer = data;
+
+	pm_wakeup_event(timer->dev, 0);
+
+	return IRQ_HANDLED;
+}
+
+struct wktmr_time {
+	u32 sec;
+	u32 pre;
+};
+
+static void wktmr_read(struct brcmstb_waketmr *timer,
+		       struct wktmr_time *t)
+{
+	u32 tmp;
+
+	do {
+		t->sec = readl_relaxed(timer->base + BRCMSTB_WKTMR_COUNTER);
+		tmp = readl_relaxed(timer->base + BRCMSTB_WKTMR_PRESCALER_VAL);
+	} while (tmp >= timer->rate);
+
+	t->pre = timer->rate - tmp;
+}
+
+static int brcmstb_waketmr_prepare_suspend(struct brcmstb_waketmr *timer)
+{
+	struct device *dev = timer->dev;
+	int ret = 0;
+
+	if (device_may_wakeup(dev)) {
+		ret = enable_irq_wake(timer->irq);
+		if (ret) {
+			dev_err(dev, "failed to enable wake-up interrupt\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+/* If enabled as a wakeup-source, arm the timer when powering off */
+static int brcmstb_waketmr_reboot(struct notifier_block *nb,
+		unsigned long action, void *data)
+{
+	struct brcmstb_waketmr *timer;
+
+	timer = container_of(nb, struct brcmstb_waketmr, reboot_notifier);
+
+	/* Set timer for cold boot */
+	if (action == SYS_POWER_OFF)
+		brcmstb_waketmr_prepare_suspend(timer);
+
+	return NOTIFY_DONE;
+}
+
+static int brcmstb_waketmr_gettime(struct device *dev,
+				   struct rtc_time *tm)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	struct wktmr_time now;
+
+	wktmr_read(timer, &now);
+
+	rtc_time_to_tm(now.sec, tm);
+
+	return 0;
+}
+
+static int brcmstb_waketmr_settime(struct device *dev,
+				   struct rtc_time *tm)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	time64_t sec;
+
+	sec = rtc_tm_to_time64(tm);
+
+	if (sec > U32_MAX || sec < 0)
+		return -EINVAL;
+
+	writel_relaxed(sec, timer->base + BRCMSTB_WKTMR_COUNTER);
+
+	return 0;
+}
+
+static int brcmstb_waketmr_getalarm(struct device *dev,
+				    struct rtc_wkalrm *alarm)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	time64_t sec;
+	u32 reg;
+
+	sec = readl_relaxed(timer->base + BRCMSTB_WKTMR_ALARM);
+	if (sec != 0) {
+		/* Alarm is enabled */
+		alarm->enabled = 1;
+		rtc_time64_to_tm(sec, &alarm->time);
+	}
+
+	reg = readl_relaxed(timer->base + BRCMSTB_WKTMR_EVENT);
+	alarm->pending = !!(reg & 1);
+
+	return 0;
+}
+
+static int brcmstb_waketmr_setalarm(struct device *dev,
+				     struct rtc_wkalrm *alarm)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	time64_t sec;
+
+	if (alarm->enabled)
+		sec = rtc_tm_to_time64(&alarm->time);
+	else
+		sec = 0;
+
+	if (sec > U32_MAX || sec < 0)
+		return -EINVAL;
+
+	brcmstb_waketmr_set_alarm(timer, sec);
+
+	return 0;
+}
+
+/*
+ * Does not do much but keep the RTC class happy. We always support
+ * alarms.
+ */
+static int brcmstb_waketmr_alarm_enable(struct device *dev,
+					unsigned int enabled)
+{
+	return 0;
+}
+
+static const struct rtc_class_ops brcmstb_waketmr_ops = {
+	.read_time	= brcmstb_waketmr_gettime,
+	.set_time	= brcmstb_waketmr_settime,
+	.read_alarm	= brcmstb_waketmr_getalarm,
+	.set_alarm	= brcmstb_waketmr_setalarm,
+	.alarm_irq_enable = brcmstb_waketmr_alarm_enable,
+};
+
+static int brcmstb_waketmr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcmstb_waketmr *timer;
+	struct resource *res;
+	int ret;
+
+	timer = devm_kzalloc(dev, sizeof(*timer), GFP_KERNEL);
+	if (!timer)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, timer);
+	timer->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	timer->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(timer->base))
+		return PTR_ERR(timer->base);
+
+	/*
+	 * Set wakeup capability before requesting wakeup interrupt, so we can
+	 * process boot-time "wakeups" (e.g., from S5 soft-off)
+	 */
+	device_set_wakeup_capable(dev, true);
+	device_wakeup_enable(dev);
+
+	timer->irq = platform_get_irq(pdev, 0);
+	if (timer->irq < 0)
+		return -ENODEV;
+
+	timer->clk = devm_clk_get(dev, NULL);
+	if (!IS_ERR(timer->clk)) {
+		ret = clk_prepare_enable(timer->clk);
+		if (ret)
+			return ret;
+		timer->rate = clk_get_rate(timer->clk);
+		if (!timer->rate)
+			timer->rate = BRCMSTB_WKTMR_DEFAULT_FREQ;
+	} else {
+		timer->rate = BRCMSTB_WKTMR_DEFAULT_FREQ;
+		timer->clk = NULL;
+	}
+
+	ret = devm_request_irq(dev, timer->irq, brcmstb_waketmr_irq, 0,
+			       "brcmstb-waketimer", timer);
+	if (ret < 0)
+		goto err_clk;
+
+	timer->reboot_notifier.notifier_call = brcmstb_waketmr_reboot;
+	register_reboot_notifier(&timer->reboot_notifier);
+
+	timer->rtc = rtc_device_register("brcmstb-waketmr", dev,
+					 &brcmstb_waketmr_ops, THIS_MODULE);
+	if (IS_ERR(timer->rtc)) {
+		dev_err(dev, "unable to register device\n");
+		ret = PTR_ERR(timer->rtc);
+		goto err_notifier;
+	}
+
+	dev_info(dev, "registered, with irq %d\n", timer->irq);
+
+	return 0;
+
+err_notifier:
+	unregister_reboot_notifier(&timer->reboot_notifier);
+
+err_clk:
+	if (timer->clk)
+		clk_disable_unprepare(timer->clk);
+
+	return ret;
+}
+
+static int brcmstb_waketmr_remove(struct platform_device *pdev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(&pdev->dev);
+
+	unregister_reboot_notifier(&timer->reboot_notifier);
+	rtc_device_unregister(timer->rtc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_waketmr_suspend(struct device *dev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+
+	return brcmstb_waketmr_prepare_suspend(timer);
+}
+
+static int brcmstb_waketmr_resume(struct device *dev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	int ret;
+
+	if (!device_may_wakeup(dev))
+		return 0;
+
+	ret = disable_irq_wake(timer->irq);
+
+	brcmstb_waketmr_clear_alarm(timer);
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(brcmstb_waketmr_pm_ops,
+			 brcmstb_waketmr_suspend, brcmstb_waketmr_resume);
+
+static const struct of_device_id brcmstb_waketmr_of_match[] = {
+	{ .compatible = "brcm,brcmstb-waketimer" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver brcmstb_waketmr_driver = {
+	.probe			= brcmstb_waketmr_probe,
+	.remove			= brcmstb_waketmr_remove,
+	.driver = {
+		.name		= "brcmstb-waketimer",
+		.pm		= &brcmstb_waketmr_pm_ops,
+		.of_match_table	= of_match_ptr(brcmstb_waketmr_of_match),
+	}
+};
+module_platform_driver(brcmstb_waketmr_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_AUTHOR("Markus Mayer");
+MODULE_DESCRIPTION("Wake-up timer driver for STB chips");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-cmos.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-cmos.c
new file mode 100644
index 0000000..5b7c16b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-cmos.c
@@ -0,0 +1,1408 @@
+/*
+ * RTC class driver for "CMOS RTC":  PCs, ACPI, etc
+ *
+ * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
+ * Copyright (C) 2006 David Brownell (convert to new framework)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The original "cmos clock" chip was an MC146818 chip, now obsolete.
+ * That defined the register interface now provided by all PCs, some
+ * non-PC systems, and incorporated into ACPI.  Modern PC chipsets
+ * integrate an MC146818 clone in their southbridge, and boards use
+ * that instead of discrete clones like the DS12887 or M48T86.  There
+ * are also clones that connect using the LPC bus.
+ *
+ * That register API is also used directly by various other drivers
+ * (notably for integrated NVRAM), infrastructure (x86 has code to
+ * bypass the RTC framework, directly reading the RTC during boot
+ * and updating minutes/seconds for systems using NTP synch) and
+ * utilities (like userspace 'hwclock', if no /dev node exists).
+ *
+ * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
+ * interrupts disabled, holding the global rtc_lock, to exclude those
+ * other drivers and utilities on correctly configured systems.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/log2.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#ifdef CONFIG_X86
+#include <asm/i8259.h>
+#endif
+
+/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
+#include <linux/mc146818rtc.h>
+
+struct cmos_rtc {
+	struct rtc_device	*rtc;
+	struct device		*dev;
+	int			irq;
+	struct resource		*iomem;
+	time64_t		alarm_expires;
+
+	void			(*wake_on)(struct device *);
+	void			(*wake_off)(struct device *);
+
+	u8			enabled_wake;
+	u8			suspend_ctrl;
+
+	/* newer hardware extends the original register set */
+	u8			day_alrm;
+	u8			mon_alrm;
+	u8			century;
+
+	struct rtc_wkalrm	saved_wkalrm;
+};
+
+/* both platform and pnp busses use negative numbers for invalid irqs */
+#define is_valid_irq(n)		((n) > 0)
+
+static const char driver_name[] = "rtc_cmos";
+
+/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
+ * always mask it against the irq enable bits in RTC_CONTROL.  Bit values
+ * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
+ */
+#define	RTC_IRQMASK	(RTC_PF | RTC_AF | RTC_UF)
+
+static inline int is_intr(u8 rtc_intr)
+{
+	if (!(rtc_intr & RTC_IRQF))
+		return 0;
+	return rtc_intr & RTC_IRQMASK;
+}
+
+/*----------------------------------------------------------------*/
+
+/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
+ * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
+ * used in a broken "legacy replacement" mode.  The breakage includes
+ * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
+ * other (better) use.
+ *
+ * When that broken mode is in use, platform glue provides a partial
+ * emulation of hardware RTC IRQ facilities using HPET #1.  We don't
+ * want to use HPET for anything except those IRQs though...
+ */
+#ifdef CONFIG_HPET_EMULATE_RTC
+#include <asm/hpet.h>
+#else
+
+static inline int is_hpet_enabled(void)
+{
+	return 0;
+}
+
+static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
+{
+	return 0;
+}
+
+static inline int hpet_set_rtc_irq_bit(unsigned long mask)
+{
+	return 0;
+}
+
+static inline int
+hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+	return 0;
+}
+
+static inline int hpet_set_periodic_freq(unsigned long freq)
+{
+	return 0;
+}
+
+static inline int hpet_rtc_dropped_irq(void)
+{
+	return 0;
+}
+
+static inline int hpet_rtc_timer_init(void)
+{
+	return 0;
+}
+
+extern irq_handler_t hpet_rtc_interrupt;
+
+static inline int hpet_register_irq_handler(irq_handler_t handler)
+{
+	return 0;
+}
+
+static inline int hpet_unregister_irq_handler(irq_handler_t handler)
+{
+	return 0;
+}
+
+#endif
+
+/*----------------------------------------------------------------*/
+
+#ifdef RTC_PORT
+
+/* Most newer x86 systems have two register banks, the first used
+ * for RTC and NVRAM and the second only for NVRAM.  Caller must
+ * own rtc_lock ... and we won't worry about access during NMI.
+ */
+#define can_bank2	true
+
+static inline unsigned char cmos_read_bank2(unsigned char addr)
+{
+	outb(addr, RTC_PORT(2));
+	return inb(RTC_PORT(3));
+}
+
+static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
+{
+	outb(addr, RTC_PORT(2));
+	outb(val, RTC_PORT(3));
+}
+
+#else
+
+#define can_bank2	false
+
+static inline unsigned char cmos_read_bank2(unsigned char addr)
+{
+	return 0;
+}
+
+static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
+{
+}
+
+#endif
+
+/*----------------------------------------------------------------*/
+
+static int cmos_read_time(struct device *dev, struct rtc_time *t)
+{
+	/*
+	 * If pm_trace abused the RTC for storage, set the timespec to 0,
+	 * which tells the caller that this RTC value is unusable.
+	 */
+	if (!pm_trace_rtc_valid())
+		return -EIO;
+
+	/* REVISIT:  if the clock has a "century" register, use
+	 * that instead of the heuristic in mc146818_get_time().
+	 * That'll make Y3K compatility (year > 2070) easy!
+	 */
+	mc146818_get_time(t);
+	return 0;
+}
+
+static int cmos_set_time(struct device *dev, struct rtc_time *t)
+{
+	/* REVISIT:  set the "century" register if available
+	 *
+	 * NOTE: this ignores the issue whereby updating the seconds
+	 * takes effect exactly 500ms after we write the register.
+	 * (Also queueing and other delays before we get this far.)
+	 */
+	return mc146818_set_time(t);
+}
+
+static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned char	rtc_control;
+
+	if (!is_valid_irq(cmos->irq))
+		return -EIO;
+
+	/* Basic alarms only support hour, minute, and seconds fields.
+	 * Some also support day and month, for alarms up to a year in
+	 * the future.
+	 */
+
+	spin_lock_irq(&rtc_lock);
+	t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
+	t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
+	t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
+
+	if (cmos->day_alrm) {
+		/* ignore upper bits on readback per ACPI spec */
+		t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
+		if (!t->time.tm_mday)
+			t->time.tm_mday = -1;
+
+		if (cmos->mon_alrm) {
+			t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
+			if (!t->time.tm_mon)
+				t->time.tm_mon = -1;
+		}
+	}
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		if (((unsigned)t->time.tm_sec) < 0x60)
+			t->time.tm_sec = bcd2bin(t->time.tm_sec);
+		else
+			t->time.tm_sec = -1;
+		if (((unsigned)t->time.tm_min) < 0x60)
+			t->time.tm_min = bcd2bin(t->time.tm_min);
+		else
+			t->time.tm_min = -1;
+		if (((unsigned)t->time.tm_hour) < 0x24)
+			t->time.tm_hour = bcd2bin(t->time.tm_hour);
+		else
+			t->time.tm_hour = -1;
+
+		if (cmos->day_alrm) {
+			if (((unsigned)t->time.tm_mday) <= 0x31)
+				t->time.tm_mday = bcd2bin(t->time.tm_mday);
+			else
+				t->time.tm_mday = -1;
+
+			if (cmos->mon_alrm) {
+				if (((unsigned)t->time.tm_mon) <= 0x12)
+					t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
+				else
+					t->time.tm_mon = -1;
+			}
+		}
+	}
+
+	t->enabled = !!(rtc_control & RTC_AIE);
+	t->pending = 0;
+
+	return 0;
+}
+
+static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
+{
+	unsigned char	rtc_intr;
+
+	/* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+	 * allegedly some older rtcs need that to handle irqs properly
+	 */
+	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+
+	if (is_hpet_enabled())
+		return;
+
+	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	if (is_intr(rtc_intr))
+		rtc_update_irq(cmos->rtc, 1, rtc_intr);
+}
+
+static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	/* flush any pending IRQ status, notably for update irqs,
+	 * before we enable new IRQs
+	 */
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	cmos_checkintr(cmos, rtc_control);
+
+	rtc_control |= mask;
+	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_set_rtc_irq_bit(mask);
+
+	cmos_checkintr(cmos, rtc_control);
+}
+
+static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	rtc_control &= ~mask;
+	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_mask_rtc_irq_bit(mask);
+
+	cmos_checkintr(cmos, rtc_control);
+}
+
+static int cmos_validate_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct cmos_rtc *cmos = dev_get_drvdata(dev);
+	struct rtc_time now;
+
+	cmos_read_time(dev, &now);
+
+	if (!cmos->day_alrm) {
+		time64_t t_max_date;
+		time64_t t_alrm;
+
+		t_max_date = rtc_tm_to_time64(&now);
+		t_max_date += 24 * 60 * 60 - 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one day in the future\n");
+			return -EINVAL;
+		}
+	} else if (!cmos->mon_alrm) {
+		struct rtc_time max_date = now;
+		time64_t t_max_date;
+		time64_t t_alrm;
+		int max_mday;
+
+		if (max_date.tm_mon == 11) {
+			max_date.tm_mon = 0;
+			max_date.tm_year += 1;
+		} else {
+			max_date.tm_mon += 1;
+		}
+		max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
+		if (max_date.tm_mday > max_mday)
+			max_date.tm_mday = max_mday;
+
+		t_max_date = rtc_tm_to_time64(&max_date);
+		t_max_date -= 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one month in the future\n");
+			return -EINVAL;
+		}
+	} else {
+		struct rtc_time max_date = now;
+		time64_t t_max_date;
+		time64_t t_alrm;
+		int max_mday;
+
+		max_date.tm_year += 1;
+		max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
+		if (max_date.tm_mday > max_mday)
+			max_date.tm_mday = max_mday;
+
+		t_max_date = rtc_tm_to_time64(&max_date);
+		t_max_date -= 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one year in the future\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned char mon, mday, hrs, min, sec, rtc_control;
+	int ret;
+
+	if (!is_valid_irq(cmos->irq))
+		return -EIO;
+
+	ret = cmos_validate_alarm(dev, t);
+	if (ret < 0)
+		return ret;
+
+	mon = t->time.tm_mon + 1;
+	mday = t->time.tm_mday;
+	hrs = t->time.tm_hour;
+	min = t->time.tm_min;
+	sec = t->time.tm_sec;
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		/* Writing 0xff means "don't care" or "match all".  */
+		mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
+		mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
+		hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
+		min = (min < 60) ? bin2bcd(min) : 0xff;
+		sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+	}
+
+	spin_lock_irq(&rtc_lock);
+
+	/* next rtc irq must not be from previous alarm setting */
+	cmos_irq_disable(cmos, RTC_AIE);
+
+	/* update alarm */
+	CMOS_WRITE(hrs, RTC_HOURS_ALARM);
+	CMOS_WRITE(min, RTC_MINUTES_ALARM);
+	CMOS_WRITE(sec, RTC_SECONDS_ALARM);
+
+	/* the system may support an "enhanced" alarm */
+	if (cmos->day_alrm) {
+		CMOS_WRITE(mday, cmos->day_alrm);
+		if (cmos->mon_alrm)
+			CMOS_WRITE(mon, cmos->mon_alrm);
+	}
+
+	/* FIXME the HPET alarm glue currently ignores day_alrm
+	 * and mon_alrm ...
+	 */
+	hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
+
+	if (t->enabled)
+		cmos_irq_enable(cmos, RTC_AIE);
+
+	spin_unlock_irq(&rtc_lock);
+
+	cmos->alarm_expires = rtc_tm_to_time64(&t->time);
+
+	return 0;
+}
+
+static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	if (!is_valid_irq(cmos->irq))
+		return -EINVAL;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	if (enabled)
+		cmos_irq_enable(cmos, RTC_AIE);
+	else
+		cmos_irq_disable(cmos, RTC_AIE);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
+
+static int cmos_procfs(struct device *dev, struct seq_file *seq)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned char	rtc_control, valid;
+
+	spin_lock_irq(&rtc_lock);
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	valid = CMOS_READ(RTC_VALID);
+	spin_unlock_irq(&rtc_lock);
+
+	/* NOTE:  at least ICH6 reports battery status using a different
+	 * (non-RTC) bit; and SQWE is ignored on many current systems.
+	 */
+	seq_printf(seq,
+		   "periodic_IRQ\t: %s\n"
+		   "update_IRQ\t: %s\n"
+		   "HPET_emulated\t: %s\n"
+		   // "square_wave\t: %s\n"
+		   "BCD\t\t: %s\n"
+		   "DST_enable\t: %s\n"
+		   "periodic_freq\t: %d\n"
+		   "batt_status\t: %s\n",
+		   (rtc_control & RTC_PIE) ? "yes" : "no",
+		   (rtc_control & RTC_UIE) ? "yes" : "no",
+		   is_hpet_enabled() ? "yes" : "no",
+		   // (rtc_control & RTC_SQWE) ? "yes" : "no",
+		   (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
+		   (rtc_control & RTC_DST_EN) ? "yes" : "no",
+		   cmos->rtc->irq_freq,
+		   (valid & RTC_VRT) ? "okay" : "dead");
+
+	return 0;
+}
+
+#else
+#define	cmos_procfs	NULL
+#endif
+
+static const struct rtc_class_ops cmos_rtc_ops = {
+	.read_time		= cmos_read_time,
+	.set_time		= cmos_set_time,
+	.read_alarm		= cmos_read_alarm,
+	.set_alarm		= cmos_set_alarm,
+	.proc			= cmos_procfs,
+	.alarm_irq_enable	= cmos_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * All these chips have at least 64 bytes of address space, shared by
+ * RTC registers and NVRAM.  Most of those bytes of NVRAM are used
+ * by boot firmware.  Modern chips have 128 or 256 bytes.
+ */
+
+#define NVRAM_OFFSET	(RTC_REG_D + 1)
+
+static ssize_t
+cmos_nvram_read(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	int	retval;
+
+	off += NVRAM_OFFSET;
+	spin_lock_irq(&rtc_lock);
+	for (retval = 0; count; count--, off++, retval++) {
+		if (off < 128)
+			*buf++ = CMOS_READ(off);
+		else if (can_bank2)
+			*buf++ = cmos_read_bank2(off);
+		else
+			break;
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	return retval;
+}
+
+static ssize_t
+cmos_nvram_write(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct cmos_rtc	*cmos;
+	int		retval;
+
+	cmos = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+	/* NOTE:  on at least PCs and Ataris, the boot firmware uses a
+	 * checksum on part of the NVRAM data.  That's currently ignored
+	 * here.  If userspace is smart enough to know what fields of
+	 * NVRAM to update, updating checksums is also part of its job.
+	 */
+	off += NVRAM_OFFSET;
+	spin_lock_irq(&rtc_lock);
+	for (retval = 0; count; count--, off++, retval++) {
+		/* don't trash RTC registers */
+		if (off == cmos->day_alrm
+				|| off == cmos->mon_alrm
+				|| off == cmos->century)
+			buf++;
+		else if (off < 128)
+			CMOS_WRITE(*buf++, off);
+		else if (can_bank2)
+			cmos_write_bank2(*buf++, off);
+		else
+			break;
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	return retval;
+}
+
+static struct bin_attribute nvram = {
+	.attr = {
+		.name	= "nvram",
+		.mode	= S_IRUGO | S_IWUSR,
+	},
+
+	.read	= cmos_nvram_read,
+	.write	= cmos_nvram_write,
+	/* size gets set up later */
+};
+
+/*----------------------------------------------------------------*/
+
+static struct cmos_rtc	cmos_rtc;
+
+static irqreturn_t cmos_interrupt(int irq, void *p)
+{
+	u8		irqstat;
+	u8		rtc_control;
+
+	spin_lock(&rtc_lock);
+
+	/* When the HPET interrupt handler calls us, the interrupt
+	 * status is passed as arg1 instead of the irq number.  But
+	 * always clear irq status, even when HPET is in the way.
+	 *
+	 * Note that HPET and RTC are almost certainly out of phase,
+	 * giving different IRQ status ...
+	 */
+	irqstat = CMOS_READ(RTC_INTR_FLAGS);
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	if (is_hpet_enabled())
+		irqstat = (unsigned long)irq & 0xF0;
+
+	/* If we were suspended, RTC_CONTROL may not be accurate since the
+	 * bios may have cleared it.
+	 */
+	if (!cmos_rtc.suspend_ctrl)
+		irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	else
+		irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
+
+	/* All Linux RTC alarms should be treated as if they were oneshot.
+	 * Similar code may be needed in system wakeup paths, in case the
+	 * alarm woke the system.
+	 */
+	if (irqstat & RTC_AIE) {
+		cmos_rtc.suspend_ctrl &= ~RTC_AIE;
+		rtc_control &= ~RTC_AIE;
+		CMOS_WRITE(rtc_control, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(RTC_AIE);
+		CMOS_READ(RTC_INTR_FLAGS);
+	}
+	spin_unlock(&rtc_lock);
+
+	if (is_intr(irqstat)) {
+		rtc_update_irq(p, 1, irqstat);
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+}
+
+#ifdef	CONFIG_PNP
+#define	INITSECTION
+
+#else
+#define	INITSECTION	__init
+#endif
+
+static int INITSECTION
+cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
+{
+	struct cmos_rtc_board_info	*info = dev_get_platdata(dev);
+	int				retval = 0;
+	unsigned char			rtc_control;
+	unsigned			address_space;
+	u32				flags = 0;
+
+	/* there can be only one ... */
+	if (cmos_rtc.dev)
+		return -EBUSY;
+
+	if (!ports)
+		return -ENODEV;
+
+	/* Claim I/O ports ASAP, minimizing conflict with legacy driver.
+	 *
+	 * REVISIT non-x86 systems may instead use memory space resources
+	 * (needing ioremap etc), not i/o space resources like this ...
+	 */
+	if (RTC_IOMAPPED)
+		ports = request_region(ports->start, resource_size(ports),
+				       driver_name);
+	else
+		ports = request_mem_region(ports->start, resource_size(ports),
+					   driver_name);
+	if (!ports) {
+		dev_dbg(dev, "i/o registers already in use\n");
+		return -EBUSY;
+	}
+
+	cmos_rtc.irq = rtc_irq;
+	cmos_rtc.iomem = ports;
+
+	/* Heuristic to deduce NVRAM size ... do what the legacy NVRAM
+	 * driver did, but don't reject unknown configs.   Old hardware
+	 * won't address 128 bytes.  Newer chips have multiple banks,
+	 * though they may not be listed in one I/O resource.
+	 */
+#if	defined(CONFIG_ATARI)
+	address_space = 64;
+#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
+			|| defined(__sparc__) || defined(__mips__) \
+			|| defined(__powerpc__) || defined(CONFIG_MN10300)
+	address_space = 128;
+#else
+#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
+	address_space = 128;
+#endif
+	if (can_bank2 && ports->end > (ports->start + 1))
+		address_space = 256;
+
+	/* For ACPI systems extension info comes from the FADT.  On others,
+	 * board specific setup provides it as appropriate.  Systems where
+	 * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
+	 * some almost-clones) can provide hooks to make that behave.
+	 *
+	 * Note that ACPI doesn't preclude putting these registers into
+	 * "extended" areas of the chip, including some that we won't yet
+	 * expect CMOS_READ and friends to handle.
+	 */
+	if (info) {
+		if (info->flags)
+			flags = info->flags;
+		if (info->address_space)
+			address_space = info->address_space;
+
+		if (info->rtc_day_alarm && info->rtc_day_alarm < 128)
+			cmos_rtc.day_alrm = info->rtc_day_alarm;
+		if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128)
+			cmos_rtc.mon_alrm = info->rtc_mon_alarm;
+		if (info->rtc_century && info->rtc_century < 128)
+			cmos_rtc.century = info->rtc_century;
+
+		if (info->wake_on && info->wake_off) {
+			cmos_rtc.wake_on = info->wake_on;
+			cmos_rtc.wake_off = info->wake_off;
+		}
+	}
+
+	cmos_rtc.dev = dev;
+	dev_set_drvdata(dev, &cmos_rtc);
+
+	cmos_rtc.rtc = rtc_device_register(driver_name, dev,
+				&cmos_rtc_ops, THIS_MODULE);
+	if (IS_ERR(cmos_rtc.rtc)) {
+		retval = PTR_ERR(cmos_rtc.rtc);
+		goto cleanup0;
+	}
+
+	rename_region(ports, dev_name(&cmos_rtc.rtc->dev));
+
+	spin_lock_irq(&rtc_lock);
+
+	if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
+		/* force periodic irq to CMOS reset default of 1024Hz;
+		 *
+		 * REVISIT it's been reported that at least one x86_64 ALI
+		 * mobo doesn't use 32KHz here ... for portability we might
+		 * need to do something about other clock frequencies.
+		 */
+		cmos_rtc.rtc->irq_freq = 1024;
+		hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
+		CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
+	}
+
+	/* disable irqs */
+	if (is_valid_irq(rtc_irq))
+		cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+
+	spin_unlock_irq(&rtc_lock);
+
+	if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
+		dev_warn(dev, "only 24-hr supported\n");
+		retval = -ENXIO;
+		goto cleanup1;
+	}
+
+	hpet_rtc_timer_init();
+
+	if (is_valid_irq(rtc_irq)) {
+		irq_handler_t rtc_cmos_int_handler;
+
+		if (is_hpet_enabled()) {
+			rtc_cmos_int_handler = hpet_rtc_interrupt;
+			retval = hpet_register_irq_handler(cmos_interrupt);
+			if (retval) {
+				hpet_mask_rtc_irq_bit(RTC_IRQMASK);
+				dev_warn(dev, "hpet_register_irq_handler "
+						" failed in rtc_init().");
+				goto cleanup1;
+			}
+		} else
+			rtc_cmos_int_handler = cmos_interrupt;
+
+		retval = request_irq(rtc_irq, rtc_cmos_int_handler,
+				0, dev_name(&cmos_rtc.rtc->dev),
+				cmos_rtc.rtc);
+		if (retval < 0) {
+			dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
+			goto cleanup1;
+		}
+	}
+
+	/* export at least the first block of NVRAM */
+	nvram.size = address_space - NVRAM_OFFSET;
+	retval = sysfs_create_bin_file(&dev->kobj, &nvram);
+	if (retval < 0) {
+		dev_dbg(dev, "can't create nvram file? %d\n", retval);
+		goto cleanup2;
+	}
+
+	dev_info(dev, "%s%s, %zd bytes nvram%s\n",
+		!is_valid_irq(rtc_irq) ? "no alarms" :
+			cmos_rtc.mon_alrm ? "alarms up to one year" :
+			cmos_rtc.day_alrm ? "alarms up to one month" :
+			"alarms up to one day",
+		cmos_rtc.century ? ", y3k" : "",
+		nvram.size,
+		is_hpet_enabled() ? ", hpet irqs" : "");
+
+	return 0;
+
+cleanup2:
+	if (is_valid_irq(rtc_irq))
+		free_irq(rtc_irq, cmos_rtc.rtc);
+cleanup1:
+	cmos_rtc.dev = NULL;
+	rtc_device_unregister(cmos_rtc.rtc);
+cleanup0:
+	if (RTC_IOMAPPED)
+		release_region(ports->start, resource_size(ports));
+	else
+		release_mem_region(ports->start, resource_size(ports));
+	return retval;
+}
+
+static void cmos_do_shutdown(int rtc_irq)
+{
+	spin_lock_irq(&rtc_lock);
+	if (is_valid_irq(rtc_irq))
+		cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
+	spin_unlock_irq(&rtc_lock);
+}
+
+static void cmos_do_remove(struct device *dev)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	struct resource *ports;
+
+	cmos_do_shutdown(cmos->irq);
+
+	sysfs_remove_bin_file(&dev->kobj, &nvram);
+
+	if (is_valid_irq(cmos->irq)) {
+		free_irq(cmos->irq, cmos->rtc);
+		hpet_unregister_irq_handler(cmos_interrupt);
+	}
+
+	rtc_device_unregister(cmos->rtc);
+	cmos->rtc = NULL;
+
+	ports = cmos->iomem;
+	if (RTC_IOMAPPED)
+		release_region(ports->start, resource_size(ports));
+	else
+		release_mem_region(ports->start, resource_size(ports));
+	cmos->iomem = NULL;
+
+	cmos->dev = NULL;
+}
+
+static int cmos_aie_poweroff(struct device *dev)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	struct rtc_time now;
+	time64_t t_now;
+	int retval = 0;
+	unsigned char rtc_control;
+
+	if (!cmos->alarm_expires)
+		return -EINVAL;
+
+	spin_lock_irq(&rtc_lock);
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	/* We only care about the situation where AIE is disabled. */
+	if (rtc_control & RTC_AIE)
+		return -EBUSY;
+
+	cmos_read_time(dev, &now);
+	t_now = rtc_tm_to_time64(&now);
+
+	/*
+	 * When enabling "RTC wake-up" in BIOS setup, the machine reboots
+	 * automatically right after shutdown on some buggy boxes.
+	 * This automatic rebooting issue won't happen when the alarm
+	 * time is larger than now+1 seconds.
+	 *
+	 * If the alarm time is equal to now+1 seconds, the issue can be
+	 * prevented by cancelling the alarm.
+	 */
+	if (cmos->alarm_expires == t_now + 1) {
+		struct rtc_wkalrm alarm;
+
+		/* Cancel the AIE timer by configuring the past time. */
+		rtc_time64_to_tm(t_now - 1, &alarm.time);
+		alarm.enabled = 0;
+		retval = cmos_set_alarm(dev, &alarm);
+	} else if (cmos->alarm_expires > t_now + 1) {
+		retval = -EBUSY;
+	}
+
+	return retval;
+}
+
+static int cmos_suspend(struct device *dev)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned char	tmp;
+
+	/* only the alarm might be a wakeup event source */
+	spin_lock_irq(&rtc_lock);
+	cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
+	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
+		unsigned char	mask;
+
+		if (device_may_wakeup(dev))
+			mask = RTC_IRQMASK & ~RTC_AIE;
+		else
+			mask = RTC_IRQMASK;
+		tmp &= ~mask;
+		CMOS_WRITE(tmp, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(mask);
+
+		cmos_checkintr(cmos, tmp);
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	if (tmp & RTC_AIE) {
+		cmos->enabled_wake = 1;
+		if (cmos->wake_on)
+			cmos->wake_on(dev);
+		else
+			enable_irq_wake(cmos->irq);
+	}
+
+	cmos_read_alarm(dev, &cmos->saved_wkalrm);
+
+	dev_dbg(dev, "suspend%s, ctrl %02x\n",
+			(tmp & RTC_AIE) ? ", alarm may wake" : "",
+			tmp);
+
+	return 0;
+}
+
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate".  To most users,
+ * distinctions between S4 and S5 are pointless.  So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+	if (!IS_ENABLED(CONFIG_PM))
+		return -ENOSYS;
+
+	return cmos_suspend(dev);
+}
+
+static void cmos_check_wkalrm(struct device *dev)
+{
+	struct cmos_rtc *cmos = dev_get_drvdata(dev);
+	struct rtc_wkalrm current_alarm;
+	time64_t t_current_expires;
+	time64_t t_saved_expires;
+
+	cmos_read_alarm(dev, &current_alarm);
+	t_current_expires = rtc_tm_to_time64(&current_alarm.time);
+	t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
+	if (t_current_expires != t_saved_expires ||
+	    cmos->saved_wkalrm.enabled != current_alarm.enabled) {
+		cmos_set_alarm(dev, &cmos->saved_wkalrm);
+	}
+}
+
+static void cmos_check_acpi_rtc_status(struct device *dev,
+				       unsigned char *rtc_control);
+
+static int __maybe_unused cmos_resume(struct device *dev)
+{
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+	unsigned char tmp;
+
+	if (cmos->enabled_wake) {
+		if (cmos->wake_off)
+			cmos->wake_off(dev);
+		else
+			disable_irq_wake(cmos->irq);
+		cmos->enabled_wake = 0;
+	}
+
+	/* The BIOS might have changed the alarm, restore it */
+	cmos_check_wkalrm(dev);
+
+	spin_lock_irq(&rtc_lock);
+	tmp = cmos->suspend_ctrl;
+	cmos->suspend_ctrl = 0;
+	/* re-enable any irqs previously active */
+	if (tmp & RTC_IRQMASK) {
+		unsigned char	mask;
+
+		if (device_may_wakeup(dev))
+			hpet_rtc_timer_init();
+
+		do {
+			CMOS_WRITE(tmp, RTC_CONTROL);
+			hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
+
+			mask = CMOS_READ(RTC_INTR_FLAGS);
+			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+			if (!is_hpet_enabled() || !is_intr(mask))
+				break;
+
+			/* force one-shot behavior if HPET blocked
+			 * the wake alarm's irq
+			 */
+			rtc_update_irq(cmos->rtc, 1, mask);
+			tmp &= ~RTC_AIE;
+			hpet_mask_rtc_irq_bit(RTC_AIE);
+		} while (mask & RTC_AIE);
+
+		if (tmp & RTC_AIE)
+			cmos_check_acpi_rtc_status(dev, &tmp);
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	dev_dbg(dev, "resume, ctrl %02x\n", tmp);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
+
+/*----------------------------------------------------------------*/
+
+/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus.
+ * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs
+ * probably list them in similar PNPBIOS tables; so PNP is more common.
+ *
+ * We don't use legacy "poke at the hardware" probing.  Ancient PCs that
+ * predate even PNPBIOS should set up platform_bus devices.
+ */
+
+#ifdef	CONFIG_ACPI
+
+#include <linux/acpi.h>
+
+static u32 rtc_handler(void *context)
+{
+	struct device *dev = context;
+	struct cmos_rtc *cmos = dev_get_drvdata(dev);
+	unsigned char rtc_control = 0;
+	unsigned char rtc_intr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	if (cmos_rtc.suspend_ctrl)
+		rtc_control = CMOS_READ(RTC_CONTROL);
+	if (rtc_control & RTC_AIE) {
+		cmos_rtc.suspend_ctrl &= ~RTC_AIE;
+		CMOS_WRITE(rtc_control, RTC_CONTROL);
+		rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+		rtc_update_irq(cmos->rtc, 1, rtc_intr);
+	}
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	pm_wakeup_hard_event(dev);
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+	return ACPI_INTERRUPT_HANDLED;
+}
+
+static inline void rtc_wake_setup(struct device *dev)
+{
+	acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
+	/*
+	 * After the RTC handler is installed, the Fixed_RTC event should
+	 * be disabled. Only when the RTC alarm is set will it be enabled.
+	 */
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_on(struct device *dev)
+{
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_enable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+/* Every ACPI platform has a mc146818 compatible "cmos rtc".  Here we find
+ * its device node and pass extra config data.  This helps its driver use
+ * capabilities that the now-obsolete mc146818 didn't have, and informs it
+ * that this board's RTC is wakeup-capable (per ACPI spec).
+ */
+static struct cmos_rtc_board_info acpi_rtc_info;
+
+static void cmos_wake_setup(struct device *dev)
+{
+	if (acpi_disabled)
+		return;
+
+	rtc_wake_setup(dev);
+	acpi_rtc_info.wake_on = rtc_wake_on;
+	acpi_rtc_info.wake_off = rtc_wake_off;
+
+	/* workaround bug in some ACPI tables */
+	if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
+		dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
+			acpi_gbl_FADT.month_alarm);
+		acpi_gbl_FADT.month_alarm = 0;
+	}
+
+	acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
+	acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
+	acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
+
+	/* NOTE:  S4_RTC_WAKE is NOT currently useful to Linux */
+	if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
+		dev_info(dev, "RTC can wake from S4\n");
+
+	dev->platform_data = &acpi_rtc_info;
+
+	/* RTC always wakes from S1/S2/S3, and often S4/STD */
+	device_init_wakeup(dev, 1);
+}
+
+static void cmos_check_acpi_rtc_status(struct device *dev,
+				       unsigned char *rtc_control)
+{
+	struct cmos_rtc *cmos = dev_get_drvdata(dev);
+	acpi_event_status rtc_status;
+	acpi_status status;
+
+	if (acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)
+		return;
+
+	status = acpi_get_event_status(ACPI_EVENT_RTC, &rtc_status);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "Could not get RTC status\n");
+	} else if (rtc_status & ACPI_EVENT_FLAG_SET) {
+		unsigned char mask;
+		*rtc_control &= ~RTC_AIE;
+		CMOS_WRITE(*rtc_control, RTC_CONTROL);
+		mask = CMOS_READ(RTC_INTR_FLAGS);
+		rtc_update_irq(cmos->rtc, 1, mask);
+	}
+}
+
+#else
+
+static void cmos_wake_setup(struct device *dev)
+{
+}
+
+static void cmos_check_acpi_rtc_status(struct device *dev,
+				       unsigned char *rtc_control)
+{
+}
+
+#endif
+
+#ifdef	CONFIG_PNP
+
+#include <linux/pnp.h>
+
+static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
+{
+	cmos_wake_setup(&pnp->dev);
+
+	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
+		unsigned int irq = 0;
+#ifdef CONFIG_X86
+		/* Some machines contain a PNP entry for the RTC, but
+		 * don't define the IRQ. It should always be safe to
+		 * hardcode it on systems with a legacy PIC.
+		 */
+		if (nr_legacy_irqs())
+			irq = 8;
+#endif
+		return cmos_do_probe(&pnp->dev,
+				pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
+	} else {
+		return cmos_do_probe(&pnp->dev,
+				pnp_get_resource(pnp, IORESOURCE_IO, 0),
+				pnp_irq(pnp, 0));
+	}
+}
+
+static void cmos_pnp_remove(struct pnp_dev *pnp)
+{
+	cmos_do_remove(&pnp->dev);
+}
+
+static void cmos_pnp_shutdown(struct pnp_dev *pnp)
+{
+	struct device *dev = &pnp->dev;
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		int retval = cmos_poweroff(dev);
+
+		if (cmos_aie_poweroff(dev) < 0 && !retval)
+			return;
+	}
+
+	cmos_do_shutdown(cmos->irq);
+}
+
+static const struct pnp_device_id rtc_ids[] = {
+	{ .id = "PNP0b00", },
+	{ .id = "PNP0b01", },
+	{ .id = "PNP0b02", },
+	{ },
+};
+MODULE_DEVICE_TABLE(pnp, rtc_ids);
+
+static struct pnp_driver cmos_pnp_driver = {
+	.name		= (char *) driver_name,
+	.id_table	= rtc_ids,
+	.probe		= cmos_pnp_probe,
+	.remove		= cmos_pnp_remove,
+	.shutdown	= cmos_pnp_shutdown,
+
+	/* flag ensures resume() gets called, and stops syslog spam */
+	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
+	.driver		= {
+			.pm = &cmos_pm_ops,
+	},
+};
+
+#endif	/* CONFIG_PNP */
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+
+static __init void cmos_of_init(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct rtc_time time;
+	int ret;
+	const __be32 *val;
+
+	if (!node)
+		return;
+
+	val = of_get_property(node, "ctrl-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+	val = of_get_property(node, "freq-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+	cmos_read_time(&pdev->dev, &time);
+	ret = rtc_valid_tm(&time);
+	if (ret) {
+		struct rtc_time def_time = {
+			.tm_year = 1,
+			.tm_mday = 1,
+		};
+		cmos_set_time(&pdev->dev, &def_time);
+	}
+}
+#else
+static inline void cmos_of_init(struct platform_device *pdev) {}
+#endif
+/*----------------------------------------------------------------*/
+
+/* Platform setup should have set up an RTC device, when PNP is
+ * unavailable ... this could happen even on (older) PCs.
+ */
+
+static int __init cmos_platform_probe(struct platform_device *pdev)
+{
+	struct resource *resource;
+	int irq;
+
+	cmos_of_init(pdev);
+	cmos_wake_setup(&pdev->dev);
+
+	if (RTC_IOMAPPED)
+		resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	else
+		resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		irq = -1;
+
+	return cmos_do_probe(&pdev->dev, resource, irq);
+}
+
+static int cmos_platform_remove(struct platform_device *pdev)
+{
+	cmos_do_remove(&pdev->dev);
+	return 0;
+}
+
+static void cmos_platform_shutdown(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		int retval = cmos_poweroff(dev);
+
+		if (cmos_aie_poweroff(dev) < 0 && !retval)
+			return;
+	}
+
+	cmos_do_shutdown(cmos->irq);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc_cmos");
+
+static struct platform_driver cmos_platform_driver = {
+	.remove		= cmos_platform_remove,
+	.shutdown	= cmos_platform_shutdown,
+	.driver = {
+		.name		= driver_name,
+		.pm		= &cmos_pm_ops,
+		.of_match_table = of_match_ptr(of_cmos_match),
+	}
+};
+
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
+static int __init cmos_init(void)
+{
+	int retval = 0;
+
+#ifdef	CONFIG_PNP
+	retval = pnp_register_driver(&cmos_pnp_driver);
+	if (retval == 0)
+		pnp_driver_registered = true;
+#endif
+
+	if (!cmos_rtc.dev) {
+		retval = platform_driver_probe(&cmos_platform_driver,
+					       cmos_platform_probe);
+		if (retval == 0)
+			platform_driver_registered = true;
+	}
+
+	if (retval == 0)
+		return 0;
+
+#ifdef	CONFIG_PNP
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
+#endif
+	return retval;
+}
+module_init(cmos_init);
+
+static void __exit cmos_exit(void)
+{
+#ifdef	CONFIG_PNP
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
+#endif
+	if (platform_driver_registered)
+		platform_driver_unregister(&cmos_platform_driver);
+}
+module_exit(cmos_exit);
+
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-coh901331.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-coh901331.c
new file mode 100644
index 0000000..cfc4141
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-coh901331.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Real Time Clock interface for ST-Ericsson AB COH 901 331 RTC.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Based on rtc-pl031.c by Deepak Saxena <dsaxena@plexity.net>
+ * Copyright 2006 (c) MontaVista Software, Inc.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * Registers in the COH 901 331
+ */
+/* Alarm value 32bit (R/W) */
+#define COH901331_ALARM		0x00U
+/* Used to set current time 32bit (R/W) */
+#define COH901331_SET_TIME	0x04U
+/* Indication if current time is valid 32bit (R/-) */
+#define COH901331_VALID		0x08U
+/* Read the current time 32bit (R/-) */
+#define COH901331_CUR_TIME	0x0cU
+/* Event register for the "alarm" interrupt */
+#define COH901331_IRQ_EVENT	0x10U
+/* Mask register for the "alarm" interrupt */
+#define COH901331_IRQ_MASK	0x14U
+/* Force register for the "alarm" interrupt */
+#define COH901331_IRQ_FORCE	0x18U
+
+/*
+ * Reference to RTC block clock
+ * Notice that the frequent clk_enable()/clk_disable() on this
+ * clock is mainly to be able to turn on/off other clocks in the
+ * hierarchy as needed, the RTC clock is always on anyway.
+ */
+struct coh901331_port {
+	struct rtc_device *rtc;
+	struct clk *clk;
+	void __iomem *virtbase;
+	int irq;
+#ifdef CONFIG_PM_SLEEP
+	u32 irqmaskstore;
+#endif
+};
+
+static irqreturn_t coh901331_interrupt(int irq, void *data)
+{
+	struct coh901331_port *rtap = data;
+
+	clk_enable(rtap->clk);
+	/* Ack IRQ */
+	writel(1, rtap->virtbase + COH901331_IRQ_EVENT);
+	/*
+	 * Disable the interrupt. This is necessary because
+	 * the RTC lives on a lower-clocked line and will
+	 * not release the IRQ line until after a few (slower)
+	 * clock cycles. The interrupt will be re-enabled when
+	 * a new alarm is set anyway.
+	 */
+	writel(0, rtap->virtbase + COH901331_IRQ_MASK);
+	clk_disable(rtap->clk);
+
+	/* Set alarm flag */
+	rtc_update_irq(rtap->rtc, 1, RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int coh901331_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	clk_enable(rtap->clk);
+	/* Check if the time is valid */
+	if (readl(rtap->virtbase + COH901331_VALID)) {
+		rtc_time_to_tm(readl(rtap->virtbase + COH901331_CUR_TIME), tm);
+		clk_disable(rtap->clk);
+		return rtc_valid_tm(tm);
+	}
+	clk_disable(rtap->clk);
+	return -EINVAL;
+}
+
+static int coh901331_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	clk_enable(rtap->clk);
+	writel(secs, rtap->virtbase + COH901331_SET_TIME);
+	clk_disable(rtap->clk);
+
+	return 0;
+}
+
+static int coh901331_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	clk_enable(rtap->clk);
+	rtc_time_to_tm(readl(rtap->virtbase + COH901331_ALARM), &alarm->time);
+	alarm->pending = readl(rtap->virtbase + COH901331_IRQ_EVENT) & 1U;
+	alarm->enabled = readl(rtap->virtbase + COH901331_IRQ_MASK) & 1U;
+	clk_disable(rtap->clk);
+
+	return 0;
+}
+
+static int coh901331_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+	unsigned long time;
+
+	rtc_tm_to_time(&alarm->time, &time);
+	clk_enable(rtap->clk);
+	writel(time, rtap->virtbase + COH901331_ALARM);
+	writel(alarm->enabled, rtap->virtbase + COH901331_IRQ_MASK);
+	clk_disable(rtap->clk);
+
+	return 0;
+}
+
+static int coh901331_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	clk_enable(rtap->clk);
+	if (enabled)
+		writel(1, rtap->virtbase + COH901331_IRQ_MASK);
+	else
+		writel(0, rtap->virtbase + COH901331_IRQ_MASK);
+	clk_disable(rtap->clk);
+
+	return 0;
+}
+
+static const struct rtc_class_ops coh901331_ops = {
+	.read_time = coh901331_read_time,
+	.set_mmss = coh901331_set_mmss,
+	.read_alarm = coh901331_read_alarm,
+	.set_alarm = coh901331_set_alarm,
+	.alarm_irq_enable = coh901331_alarm_irq_enable,
+};
+
+static int __exit coh901331_remove(struct platform_device *pdev)
+{
+	struct coh901331_port *rtap = platform_get_drvdata(pdev);
+
+	if (rtap)
+		clk_unprepare(rtap->clk);
+
+	return 0;
+}
+
+
+static int __init coh901331_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct coh901331_port *rtap;
+	struct resource *res;
+
+	rtap = devm_kzalloc(&pdev->dev,
+			    sizeof(struct coh901331_port), GFP_KERNEL);
+	if (!rtap)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtap->virtbase  = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtap->virtbase))
+		return PTR_ERR(rtap->virtbase);
+
+	rtap->irq = platform_get_irq(pdev, 0);
+	if (devm_request_irq(&pdev->dev, rtap->irq, coh901331_interrupt, 0,
+			     "RTC COH 901 331 Alarm", rtap))
+		return -EIO;
+
+	rtap->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtap->clk)) {
+		ret = PTR_ERR(rtap->clk);
+		dev_err(&pdev->dev, "could not get clock\n");
+		return ret;
+	}
+
+	/* We enable/disable the clock only to assure it works */
+	ret = clk_prepare_enable(rtap->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not enable clock\n");
+		return ret;
+	}
+	clk_disable(rtap->clk);
+
+	platform_set_drvdata(pdev, rtap);
+	rtap->rtc = devm_rtc_device_register(&pdev->dev, "coh901331",
+					&coh901331_ops, THIS_MODULE);
+	if (IS_ERR(rtap->rtc)) {
+		ret = PTR_ERR(rtap->rtc);
+		goto out_no_rtc;
+	}
+
+	return 0;
+
+ out_no_rtc:
+	clk_unprepare(rtap->clk);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int coh901331_suspend(struct device *dev)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	/*
+	 * If this RTC alarm will be used for waking the system up,
+	 * don't disable it of course. Else we just disable the alarm
+	 * and await suspension.
+	 */
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(rtap->irq);
+	} else {
+		clk_enable(rtap->clk);
+		rtap->irqmaskstore = readl(rtap->virtbase + COH901331_IRQ_MASK);
+		writel(0, rtap->virtbase + COH901331_IRQ_MASK);
+		clk_disable(rtap->clk);
+	}
+	clk_unprepare(rtap->clk);
+	return 0;
+}
+
+static int coh901331_resume(struct device *dev)
+{
+	struct coh901331_port *rtap = dev_get_drvdata(dev);
+
+	clk_prepare(rtap->clk);
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(rtap->irq);
+	} else {
+		clk_enable(rtap->clk);
+		writel(rtap->irqmaskstore, rtap->virtbase + COH901331_IRQ_MASK);
+		clk_disable(rtap->clk);
+	}
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(coh901331_pm_ops, coh901331_suspend, coh901331_resume);
+
+static void coh901331_shutdown(struct platform_device *pdev)
+{
+	struct coh901331_port *rtap = platform_get_drvdata(pdev);
+
+	clk_enable(rtap->clk);
+	writel(0, rtap->virtbase + COH901331_IRQ_MASK);
+	clk_disable_unprepare(rtap->clk);
+}
+
+static const struct of_device_id coh901331_dt_match[] = {
+	{ .compatible = "stericsson,coh901331" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, coh901331_dt_match);
+
+static struct platform_driver coh901331_driver = {
+	.driver = {
+		.name = "rtc-coh901331",
+		.pm = &coh901331_pm_ops,
+		.of_match_table = coh901331_dt_match,
+	},
+	.remove = __exit_p(coh901331_remove),
+	.shutdown = coh901331_shutdown,
+};
+
+module_platform_driver_probe(coh901331_driver, coh901331_probe);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 331 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-core.h b/src/kernel/linux/v4.14/drivers/rtc/rtc-core.h
new file mode 100644
index 0000000..513b9be
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-core.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef CONFIG_RTC_INTF_DEV
+
+extern void __init rtc_dev_init(void);
+extern void __exit rtc_dev_exit(void);
+extern void rtc_dev_prepare(struct rtc_device *rtc);
+
+#else
+
+static inline void rtc_dev_init(void)
+{
+}
+
+static inline void rtc_dev_exit(void)
+{
+}
+
+static inline void rtc_dev_prepare(struct rtc_device *rtc)
+{
+}
+
+#endif
+
+#ifdef CONFIG_RTC_INTF_PROC
+
+extern void rtc_proc_add_device(struct rtc_device *rtc);
+extern void rtc_proc_del_device(struct rtc_device *rtc);
+
+#else
+
+static inline void rtc_proc_add_device(struct rtc_device *rtc)
+{
+}
+
+static inline void rtc_proc_del_device(struct rtc_device *rtc)
+{
+}
+
+#endif
+
+#ifdef CONFIG_RTC_INTF_SYSFS
+const struct attribute_group **rtc_get_dev_attribute_groups(void);
+#else
+static inline const struct attribute_group **rtc_get_dev_attribute_groups(void)
+{
+	return NULL;
+}
+#endif
+
+#ifdef CONFIG_RTC_NVMEM
+void rtc_nvmem_register(struct rtc_device *rtc);
+void rtc_nvmem_unregister(struct rtc_device *rtc);
+#else
+static inline void rtc_nvmem_register(struct rtc_device *rtc) {}
+static inline void rtc_nvmem_unregister(struct rtc_device *rtc) {}
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-cpcap.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-cpcap.c
new file mode 100644
index 0000000..3a0333e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-cpcap.c
@@ -0,0 +1,330 @@
+/*
+ * Motorola CPCAP PMIC RTC driver
+ *
+ * Based on cpcap-regulator.c from Motorola Linux kernel tree
+ * Copyright (C) 2009 Motorola, Inc.
+ *
+ * Rewritten for mainline kernel
+ *  - use DT
+ *  - use regmap
+ *  - use standard interrupt framework
+ *  - use managed device resources
+ *  - remove custom "secure clock daemon" helpers
+ *
+ * Copyright (C) 2017 Sebastian Reichel <sre@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/mfd/motorola-cpcap.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#define SECS_PER_DAY 86400
+#define DAY_MASK  0x7FFF
+#define TOD1_MASK 0x00FF
+#define TOD2_MASK 0x01FF
+
+struct cpcap_time {
+	int day;
+	int tod1;
+	int tod2;
+};
+
+struct cpcap_rtc {
+	struct regmap *regmap;
+	struct rtc_device *rtc_dev;
+	u16 vendor;
+	int alarm_irq;
+	bool alarm_enabled;
+	int update_irq;
+	bool update_enabled;
+};
+
+static void cpcap2rtc_time(struct rtc_time *rtc, struct cpcap_time *cpcap)
+{
+	unsigned long int tod;
+	unsigned long int time;
+
+	tod = (cpcap->tod1 & TOD1_MASK) | ((cpcap->tod2 & TOD2_MASK) << 8);
+	time = tod + ((cpcap->day & DAY_MASK) * SECS_PER_DAY);
+
+	rtc_time_to_tm(time, rtc);
+}
+
+static void rtc2cpcap_time(struct cpcap_time *cpcap, struct rtc_time *rtc)
+{
+	unsigned long time;
+
+	rtc_tm_to_time(rtc, &time);
+
+	cpcap->day = time / SECS_PER_DAY;
+	time %= SECS_PER_DAY;
+	cpcap->tod2 = (time >> 8) & TOD2_MASK;
+	cpcap->tod1 = time & TOD1_MASK;
+}
+
+static int cpcap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct cpcap_rtc *rtc = dev_get_drvdata(dev);
+
+	if (rtc->alarm_enabled == enabled)
+		return 0;
+
+	if (enabled)
+		enable_irq(rtc->alarm_irq);
+	else
+		disable_irq(rtc->alarm_irq);
+
+	rtc->alarm_enabled = !!enabled;
+
+	return 0;
+}
+
+static int cpcap_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct cpcap_rtc *rtc;
+	struct cpcap_time cpcap_tm;
+	int temp_tod2;
+	int ret;
+
+	rtc = dev_get_drvdata(dev);
+
+	ret = regmap_read(rtc->regmap, CPCAP_REG_TOD2, &temp_tod2);
+	ret |= regmap_read(rtc->regmap, CPCAP_REG_DAY, &cpcap_tm.day);
+	ret |= regmap_read(rtc->regmap, CPCAP_REG_TOD1, &cpcap_tm.tod1);
+	ret |= regmap_read(rtc->regmap, CPCAP_REG_TOD2, &cpcap_tm.tod2);
+
+	if (temp_tod2 > cpcap_tm.tod2)
+		ret |= regmap_read(rtc->regmap, CPCAP_REG_DAY, &cpcap_tm.day);
+
+	if (ret) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	cpcap2rtc_time(tm, &cpcap_tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int cpcap_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct cpcap_rtc *rtc;
+	struct cpcap_time cpcap_tm;
+	int ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	rtc2cpcap_time(&cpcap_tm, tm);
+
+	if (rtc->alarm_enabled)
+		disable_irq(rtc->alarm_irq);
+	if (rtc->update_enabled)
+		disable_irq(rtc->update_irq);
+
+	if (rtc->vendor == CPCAP_VENDOR_ST) {
+		/* The TOD1 and TOD2 registers MUST be written in this order
+		 * for the change to properly set.
+		 */
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TOD1,
+					  TOD1_MASK, cpcap_tm.tod1);
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TOD2,
+					  TOD2_MASK, cpcap_tm.tod2);
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_DAY,
+					  DAY_MASK, cpcap_tm.day);
+	} else {
+		/* Clearing the upper lower 8 bits of the TOD guarantees that
+		 * the upper half of TOD (TOD2) will not increment for 0xFF RTC
+		 * ticks (255 seconds).  During this time we can safely write
+		 * to DAY, TOD2, then TOD1 (in that order) and expect RTC to be
+		 * synchronized to the exact time requested upon the final write
+		 * to TOD1.
+		 */
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TOD1,
+					  TOD1_MASK, 0);
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_DAY,
+					  DAY_MASK, cpcap_tm.day);
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TOD2,
+					  TOD2_MASK, cpcap_tm.tod2);
+		ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TOD1,
+					  TOD1_MASK, cpcap_tm.tod1);
+	}
+
+	if (rtc->update_enabled)
+		enable_irq(rtc->update_irq);
+	if (rtc->alarm_enabled)
+		enable_irq(rtc->alarm_irq);
+
+	return ret;
+}
+
+static int cpcap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct cpcap_rtc *rtc;
+	struct cpcap_time cpcap_tm;
+	int ret;
+
+	rtc = dev_get_drvdata(dev);
+
+	alrm->enabled = rtc->alarm_enabled;
+
+	ret = regmap_read(rtc->regmap, CPCAP_REG_DAYA, &cpcap_tm.day);
+	ret |= regmap_read(rtc->regmap, CPCAP_REG_TODA2, &cpcap_tm.tod2);
+	ret |= regmap_read(rtc->regmap, CPCAP_REG_TODA1, &cpcap_tm.tod1);
+
+	if (ret) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	cpcap2rtc_time(&alrm->time, &cpcap_tm);
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int cpcap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct cpcap_rtc *rtc;
+	struct cpcap_time cpcap_tm;
+	int ret;
+
+	rtc = dev_get_drvdata(dev);
+
+	rtc2cpcap_time(&cpcap_tm, &alrm->time);
+
+	if (rtc->alarm_enabled)
+		disable_irq(rtc->alarm_irq);
+
+	ret = regmap_update_bits(rtc->regmap, CPCAP_REG_DAYA, DAY_MASK,
+				 cpcap_tm.day);
+	ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TODA2, TOD2_MASK,
+				  cpcap_tm.tod2);
+	ret |= regmap_update_bits(rtc->regmap, CPCAP_REG_TODA1, TOD1_MASK,
+				  cpcap_tm.tod1);
+
+	if (!ret) {
+		enable_irq(rtc->alarm_irq);
+		rtc->alarm_enabled = true;
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops cpcap_rtc_ops = {
+	.read_time		= cpcap_rtc_read_time,
+	.set_time		= cpcap_rtc_set_time,
+	.read_alarm		= cpcap_rtc_read_alarm,
+	.set_alarm		= cpcap_rtc_set_alarm,
+	.alarm_irq_enable	= cpcap_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t cpcap_rtc_alarm_irq(int irq, void *data)
+{
+	struct cpcap_rtc *rtc = data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cpcap_rtc_update_irq(int irq, void *data)
+{
+	struct cpcap_rtc *rtc = data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+	return IRQ_HANDLED;
+}
+
+static int cpcap_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cpcap_rtc *rtc;
+	int err;
+
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!rtc->regmap)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, rtc);
+	rtc->rtc_dev = devm_rtc_device_register(dev, "cpcap_rtc",
+						&cpcap_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	err = cpcap_get_vendor(dev, rtc->regmap, &rtc->vendor);
+	if (err)
+		return err;
+
+	rtc->alarm_irq = platform_get_irq(pdev, 0);
+	err = devm_request_threaded_irq(dev, rtc->alarm_irq, NULL,
+					cpcap_rtc_alarm_irq, IRQF_TRIGGER_NONE,
+					"rtc_alarm", rtc);
+	if (err) {
+		dev_err(dev, "Could not request alarm irq: %d\n", err);
+		return err;
+	}
+	disable_irq(rtc->alarm_irq);
+
+	/* Stock Android uses the 1 Hz interrupt for "secure clock daemon",
+	 * which is not supported by the mainline kernel. The mainline kernel
+	 * does not use the irq at the moment, but we explicitly request and
+	 * disable it, so that its masked and does not wake up the processor
+	 * every second.
+	 */
+	rtc->update_irq = platform_get_irq(pdev, 1);
+	err = devm_request_threaded_irq(dev, rtc->update_irq, NULL,
+					cpcap_rtc_update_irq, IRQF_TRIGGER_NONE,
+					"rtc_1hz", rtc);
+	if (err) {
+		dev_err(dev, "Could not request update irq: %d\n", err);
+		return err;
+	}
+	disable_irq(rtc->update_irq);
+
+	err = device_init_wakeup(dev, 1);
+	if (err) {
+		dev_err(dev, "wakeup initialization failed (%d)\n", err);
+		/* ignore error and continue without wakeup support */
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cpcap_rtc_of_match[] = {
+	{ .compatible = "motorola,cpcap-rtc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_rtc_of_match);
+
+static struct platform_driver cpcap_rtc_driver = {
+	.probe		= cpcap_rtc_probe,
+	.driver		= {
+		.name	= "cpcap-rtc",
+		.of_match_table = cpcap_rtc_of_match,
+	},
+};
+
+module_platform_driver(cpcap_rtc_driver);
+
+MODULE_ALIAS("platform:cpcap-rtc");
+MODULE_DESCRIPTION("CPCAP RTC driver");
+MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-da9052.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9052.c
new file mode 100644
index 0000000..4273377
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9052.c
@@ -0,0 +1,335 @@
+/*
+ * Real time clock driver for DA9052
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Dajun Dajun Chen <dajun.chen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+#define rtc_err(rtc, fmt, ...) \
+		dev_err(rtc->da9052->dev, "%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define DA9052_GET_TIME_RETRIES 5
+
+struct da9052_rtc {
+	struct rtc_device *rtc;
+	struct da9052 *da9052;
+};
+
+static int da9052_rtc_enable_alarm(struct da9052_rtc *rtc, bool enable)
+{
+	int ret;
+	if (enable) {
+		ret = da9052_reg_update(rtc->da9052, DA9052_ALARM_Y_REG,
+				DA9052_ALARM_Y_ALARM_ON|DA9052_ALARM_Y_TICK_ON,
+				DA9052_ALARM_Y_ALARM_ON);
+		if (ret != 0)
+			rtc_err(rtc, "Failed to enable ALM: %d\n", ret);
+	} else {
+		ret = da9052_reg_update(rtc->da9052, DA9052_ALARM_Y_REG,
+			DA9052_ALARM_Y_ALARM_ON|DA9052_ALARM_Y_TICK_ON, 0);
+		if (ret != 0)
+			rtc_err(rtc, "Write error: %d\n", ret);
+	}
+	return ret;
+}
+
+static irqreturn_t da9052_rtc_irq(int irq, void *data)
+{
+	struct da9052_rtc *rtc = data;
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int da9052_read_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm)
+{
+	int ret;
+	uint8_t v[2][5];
+	int idx = 1;
+	int timeout = DA9052_GET_TIME_RETRIES;
+
+	ret = da9052_group_read(rtc->da9052, DA9052_ALARM_MI_REG, 5, &v[0][0]);
+	if (ret) {
+		rtc_err(rtc, "Failed to group read ALM: %d\n", ret);
+		return ret;
+	}
+
+	do {
+		ret = da9052_group_read(rtc->da9052,
+					DA9052_ALARM_MI_REG, 5, &v[idx][0]);
+		if (ret) {
+			rtc_err(rtc, "Failed to group read ALM: %d\n", ret);
+			return ret;
+		}
+
+		if (memcmp(&v[0][0], &v[1][0], 5) == 0) {
+			rtc_tm->tm_year = (v[0][4] & DA9052_RTC_YEAR) + 100;
+			rtc_tm->tm_mon  = (v[0][3] & DA9052_RTC_MONTH) - 1;
+			rtc_tm->tm_mday = v[0][2] & DA9052_RTC_DAY;
+			rtc_tm->tm_hour = v[0][1] & DA9052_RTC_HOUR;
+			rtc_tm->tm_min  = v[0][0] & DA9052_RTC_MIN;
+			rtc_tm->tm_sec = 0;
+
+			ret = rtc_valid_tm(rtc_tm);
+			return ret;
+		}
+
+		idx = (1-idx);
+		msleep(20);
+
+	} while (timeout--);
+
+	rtc_err(rtc, "Timed out reading alarm time\n");
+
+	return -EIO;
+}
+
+static int da9052_set_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm)
+{
+	struct da9052 *da9052 = rtc->da9052;
+	unsigned long alm_time;
+	int ret;
+	uint8_t v[3];
+
+	ret = rtc_tm_to_time(rtc_tm, &alm_time);
+	if (ret != 0)
+		return ret;
+
+	if (rtc_tm->tm_sec > 0) {
+		alm_time += 60 - rtc_tm->tm_sec;
+		rtc_time_to_tm(alm_time, rtc_tm);
+	}
+	BUG_ON(rtc_tm->tm_sec); /* it will cause repeated irqs if not zero */
+
+	rtc_tm->tm_year -= 100;
+	rtc_tm->tm_mon += 1;
+
+	ret = da9052_reg_update(da9052, DA9052_ALARM_MI_REG,
+				DA9052_RTC_MIN, rtc_tm->tm_min);
+	if (ret != 0) {
+		rtc_err(rtc, "Failed to write ALRM MIN: %d\n", ret);
+		return ret;
+	}
+
+	v[0] = rtc_tm->tm_hour;
+	v[1] = rtc_tm->tm_mday;
+	v[2] = rtc_tm->tm_mon;
+
+	ret = da9052_group_write(da9052, DA9052_ALARM_H_REG, 3, v);
+	if (ret < 0)
+		return ret;
+
+	ret = da9052_reg_update(da9052, DA9052_ALARM_Y_REG,
+				DA9052_RTC_YEAR, rtc_tm->tm_year);
+	if (ret != 0)
+		rtc_err(rtc, "Failed to write ALRM YEAR: %d\n", ret);
+
+	return ret;
+}
+
+static int da9052_rtc_get_alarm_status(struct da9052_rtc *rtc)
+{
+	int ret;
+
+	ret = da9052_reg_read(rtc->da9052, DA9052_ALARM_Y_REG);
+	if (ret < 0) {
+		rtc_err(rtc, "Failed to read ALM: %d\n", ret);
+		return ret;
+	}
+
+	return !!(ret&DA9052_ALARM_Y_ALARM_ON);
+}
+
+static int da9052_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct da9052_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+	uint8_t v[2][6];
+	int idx = 1;
+	int timeout = DA9052_GET_TIME_RETRIES;
+
+	ret = da9052_group_read(rtc->da9052, DA9052_COUNT_S_REG, 6, &v[0][0]);
+	if (ret) {
+		rtc_err(rtc, "Failed to read RTC time : %d\n", ret);
+		return ret;
+	}
+
+	do {
+		ret = da9052_group_read(rtc->da9052,
+					DA9052_COUNT_S_REG, 6, &v[idx][0]);
+		if (ret) {
+			rtc_err(rtc, "Failed to read RTC time : %d\n", ret);
+			return ret;
+		}
+
+		if (memcmp(&v[0][0], &v[1][0], 6) == 0) {
+			rtc_tm->tm_year = (v[0][5] & DA9052_RTC_YEAR) + 100;
+			rtc_tm->tm_mon  = (v[0][4] & DA9052_RTC_MONTH) - 1;
+			rtc_tm->tm_mday = v[0][3] & DA9052_RTC_DAY;
+			rtc_tm->tm_hour = v[0][2] & DA9052_RTC_HOUR;
+			rtc_tm->tm_min  = v[0][1] & DA9052_RTC_MIN;
+			rtc_tm->tm_sec  = v[0][0] & DA9052_RTC_SEC;
+
+			ret = rtc_valid_tm(rtc_tm);
+			return ret;
+		}
+
+		idx = (1-idx);
+		msleep(20);
+
+	} while (timeout--);
+
+	rtc_err(rtc, "Timed out reading time\n");
+
+	return -EIO;
+}
+
+static int da9052_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct da9052_rtc *rtc;
+	uint8_t v[6];
+	int ret;
+
+	/* DA9052 only has 6 bits for year - to represent 2000-2063 */
+	if ((tm->tm_year < 100) || (tm->tm_year > 163))
+		return -EINVAL;
+
+	rtc = dev_get_drvdata(dev);
+
+	v[0] = tm->tm_sec;
+	v[1] = tm->tm_min;
+	v[2] = tm->tm_hour;
+	v[3] = tm->tm_mday;
+	v[4] = tm->tm_mon + 1;
+	v[5] = tm->tm_year - 100;
+
+	ret = da9052_group_write(rtc->da9052, DA9052_COUNT_S_REG, 6, v);
+	if (ret < 0)
+		rtc_err(rtc, "failed to set RTC time: %d\n", ret);
+	return ret;
+}
+
+static int da9052_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct rtc_time *tm = &alrm->time;
+	struct da9052_rtc *rtc = dev_get_drvdata(dev);
+
+	ret = da9052_read_alarm(rtc, tm);
+	if (ret < 0) {
+		rtc_err(rtc, "failed to read RTC alarm: %d\n", ret);
+		return ret;
+	}
+
+	alrm->enabled = da9052_rtc_get_alarm_status(rtc);
+	return 0;
+}
+
+static int da9052_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct rtc_time *tm = &alrm->time;
+	struct da9052_rtc *rtc = dev_get_drvdata(dev);
+
+	/* DA9052 only has 6 bits for year - to represent 2000-2063 */
+	if ((tm->tm_year < 100) || (tm->tm_year > 163))
+		return -EINVAL;
+
+	ret = da9052_rtc_enable_alarm(rtc, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = da9052_set_alarm(rtc, tm);
+	if (ret < 0)
+		return ret;
+
+	ret = da9052_rtc_enable_alarm(rtc, 1);
+	return ret;
+}
+
+static int da9052_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct da9052_rtc *rtc = dev_get_drvdata(dev);
+
+	return da9052_rtc_enable_alarm(rtc, enabled);
+}
+
+static const struct rtc_class_ops da9052_rtc_ops = {
+	.read_time	= da9052_rtc_read_time,
+	.set_time	= da9052_rtc_set_time,
+	.read_alarm	= da9052_rtc_read_alarm,
+	.set_alarm	= da9052_rtc_set_alarm,
+	.alarm_irq_enable = da9052_rtc_alarm_irq_enable,
+};
+
+static int da9052_rtc_probe(struct platform_device *pdev)
+{
+	struct da9052_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct da9052_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->da9052 = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, rtc);
+
+	ret = da9052_reg_write(rtc->da9052, DA9052_BBAT_CONT_REG, 0xFE);
+	if (ret < 0) {
+		rtc_err(rtc,
+			"Failed to setup RTC battery charging: %d\n", ret);
+		return ret;
+	}
+
+	ret = da9052_reg_update(rtc->da9052, DA9052_ALARM_Y_REG,
+				DA9052_ALARM_Y_TICK_ON, 0);
+	if (ret != 0)
+		rtc_err(rtc, "Failed to disable TICKS: %d\n", ret);
+
+	device_init_wakeup(&pdev->dev, true);
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				       &da9052_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc->rtc))
+		return PTR_ERR(rtc->rtc);
+
+	ret = da9052_request_irq(rtc->da9052, DA9052_IRQ_ALARM, "ALM",
+				da9052_rtc_irq, rtc);
+	if (ret != 0) {
+		rtc_err(rtc, "irq registration failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver da9052_rtc_driver = {
+	.probe	= da9052_rtc_probe,
+	.driver = {
+		.name	= "da9052-rtc",
+	},
+};
+
+module_platform_driver(da9052_rtc_driver);
+
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_DESCRIPTION("RTC driver for Dialog DA9052 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-da9055.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9055.c
new file mode 100644
index 0000000..678af86
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9055.c
@@ -0,0 +1,404 @@
+/*
+ * Real time clock driver for DA9055
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Dajun Dajun Chen <dajun.chen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+struct da9055_rtc {
+	struct rtc_device *rtc;
+	struct da9055 *da9055;
+	int alarm_enable;
+};
+
+static int da9055_rtc_enable_alarm(struct da9055_rtc *rtc, bool enable)
+{
+	int ret;
+	if (enable) {
+		ret = da9055_reg_update(rtc->da9055, DA9055_REG_ALARM_Y,
+					DA9055_RTC_ALM_EN,
+					DA9055_RTC_ALM_EN);
+		if (ret != 0)
+			dev_err(rtc->da9055->dev, "Failed to enable ALM: %d\n",
+				ret);
+		rtc->alarm_enable = 1;
+	} else {
+		ret = da9055_reg_update(rtc->da9055, DA9055_REG_ALARM_Y,
+					DA9055_RTC_ALM_EN, 0);
+		if (ret != 0)
+			dev_err(rtc->da9055->dev,
+				"Failed to disable ALM: %d\n", ret);
+		rtc->alarm_enable = 0;
+	}
+	return ret;
+}
+
+static irqreturn_t da9055_rtc_alm_irq(int irq, void *data)
+{
+	struct da9055_rtc *rtc = data;
+
+	da9055_rtc_enable_alarm(rtc, 0);
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int da9055_read_alarm(struct da9055 *da9055, struct rtc_time *rtc_tm)
+{
+	int ret;
+	uint8_t v[5];
+
+	ret = da9055_group_read(da9055, DA9055_REG_ALARM_MI, 5, v);
+	if (ret != 0) {
+		dev_err(da9055->dev, "Failed to group read ALM: %d\n", ret);
+		return ret;
+	}
+
+	rtc_tm->tm_year = (v[4] & DA9055_RTC_ALM_YEAR) + 100;
+	rtc_tm->tm_mon  = (v[3] & DA9055_RTC_ALM_MONTH) - 1;
+	rtc_tm->tm_mday = v[2] & DA9055_RTC_ALM_DAY;
+	rtc_tm->tm_hour = v[1] & DA9055_RTC_ALM_HOUR;
+	rtc_tm->tm_min  = v[0] & DA9055_RTC_ALM_MIN;
+	rtc_tm->tm_sec = 0;
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int da9055_set_alarm(struct da9055 *da9055, struct rtc_time *rtc_tm)
+{
+	int ret;
+	uint8_t v[2];
+
+	rtc_tm->tm_year -= 100;
+	rtc_tm->tm_mon += 1;
+
+	ret = da9055_reg_update(da9055, DA9055_REG_ALARM_MI,
+				DA9055_RTC_ALM_MIN, rtc_tm->tm_min);
+	if (ret != 0) {
+		dev_err(da9055->dev, "Failed to write ALRM MIN: %d\n", ret);
+		return ret;
+	}
+
+	v[0] = rtc_tm->tm_hour;
+	v[1] = rtc_tm->tm_mday;
+
+	ret = da9055_group_write(da9055, DA9055_REG_ALARM_H, 2, v);
+	if (ret < 0)
+		return ret;
+
+	ret = da9055_reg_update(da9055, DA9055_REG_ALARM_MO,
+				DA9055_RTC_ALM_MONTH, rtc_tm->tm_mon);
+	if (ret < 0)
+		dev_err(da9055->dev, "Failed to write ALM Month:%d\n", ret);
+
+	ret = da9055_reg_update(da9055, DA9055_REG_ALARM_Y,
+				DA9055_RTC_ALM_YEAR, rtc_tm->tm_year);
+	if (ret < 0)
+		dev_err(da9055->dev, "Failed to write ALM Year:%d\n", ret);
+
+	return ret;
+}
+
+static int da9055_rtc_get_alarm_status(struct da9055 *da9055)
+{
+	int ret;
+
+	ret = da9055_reg_read(da9055, DA9055_REG_ALARM_Y);
+	if (ret < 0) {
+		dev_err(da9055->dev, "Failed to read ALM: %d\n", ret);
+		return ret;
+	}
+	ret &= DA9055_RTC_ALM_EN;
+	return (ret > 0) ? 1 : 0;
+}
+
+static int da9055_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct da9055_rtc *rtc = dev_get_drvdata(dev);
+	uint8_t v[6];
+	int ret;
+
+	ret = da9055_reg_read(rtc->da9055, DA9055_REG_COUNT_S);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Registers are only valid when RTC_READ
+	 * status bit is asserted
+	 */
+	if (!(ret & DA9055_RTC_READ))
+		return -EBUSY;
+
+	ret = da9055_group_read(rtc->da9055, DA9055_REG_COUNT_S, 6, v);
+	if (ret < 0) {
+		dev_err(rtc->da9055->dev, "Failed to read RTC time : %d\n",
+			ret);
+		return ret;
+	}
+
+	rtc_tm->tm_year = (v[5] & DA9055_RTC_YEAR) + 100;
+	rtc_tm->tm_mon  = (v[4] & DA9055_RTC_MONTH) - 1;
+	rtc_tm->tm_mday = v[3] & DA9055_RTC_DAY;
+	rtc_tm->tm_hour = v[2] & DA9055_RTC_HOUR;
+	rtc_tm->tm_min  = v[1] & DA9055_RTC_MIN;
+	rtc_tm->tm_sec  = v[0] & DA9055_RTC_SEC;
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int da9055_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct da9055_rtc *rtc;
+	uint8_t v[6];
+
+	rtc = dev_get_drvdata(dev);
+
+	v[0] = tm->tm_sec;
+	v[1] = tm->tm_min;
+	v[2] = tm->tm_hour;
+	v[3] = tm->tm_mday;
+	v[4] = tm->tm_mon + 1;
+	v[5] = tm->tm_year - 100;
+
+	return da9055_group_write(rtc->da9055, DA9055_REG_COUNT_S, 6, v);
+}
+
+static int da9055_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct rtc_time *tm = &alrm->time;
+	struct da9055_rtc *rtc = dev_get_drvdata(dev);
+
+	ret = da9055_read_alarm(rtc->da9055, tm);
+
+	if (ret)
+		return ret;
+
+	alrm->enabled = da9055_rtc_get_alarm_status(rtc->da9055);
+
+	return 0;
+}
+
+static int da9055_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct rtc_time *tm = &alrm->time;
+	struct da9055_rtc *rtc = dev_get_drvdata(dev);
+
+	ret = da9055_rtc_enable_alarm(rtc, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = da9055_set_alarm(rtc->da9055, tm);
+	if (ret)
+		return ret;
+
+	ret = da9055_rtc_enable_alarm(rtc, 1);
+
+	return ret;
+}
+
+static int da9055_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct da9055_rtc *rtc = dev_get_drvdata(dev);
+
+	return da9055_rtc_enable_alarm(rtc, enabled);
+}
+
+static const struct rtc_class_ops da9055_rtc_ops = {
+	.read_time	= da9055_rtc_read_time,
+	.set_time	= da9055_rtc_set_time,
+	.read_alarm	= da9055_rtc_read_alarm,
+	.set_alarm	= da9055_rtc_set_alarm,
+	.alarm_irq_enable = da9055_rtc_alarm_irq_enable,
+};
+
+static int da9055_rtc_device_init(struct da9055 *da9055,
+					struct da9055_pdata *pdata)
+{
+	int ret;
+
+	/* Enable RTC and the internal Crystal */
+	ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B,
+				DA9055_RTC_EN, DA9055_RTC_EN);
+	if (ret < 0)
+		return ret;
+	ret = da9055_reg_update(da9055, DA9055_REG_EN_32K,
+				DA9055_CRYSTAL_EN, DA9055_CRYSTAL_EN);
+	if (ret < 0)
+		return ret;
+
+	/* Enable RTC in Power Down mode */
+	ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B,
+				DA9055_RTC_MODE_PD, DA9055_RTC_MODE_PD);
+	if (ret < 0)
+		return ret;
+
+	/* Enable RTC in Reset mode */
+	if (pdata && pdata->reset_enable) {
+		ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B,
+					DA9055_RTC_MODE_SD,
+					DA9055_RTC_MODE_SD <<
+					DA9055_RTC_MODE_SD_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Disable the RTC TICK ALM */
+	ret = da9055_reg_update(da9055, DA9055_REG_ALARM_MO,
+				DA9055_RTC_TICK_WAKE_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int da9055_rtc_probe(struct platform_device *pdev)
+{
+	struct da9055_rtc *rtc;
+	struct da9055_pdata *pdata = NULL;
+	int ret, alm_irq;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct da9055_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->da9055 = dev_get_drvdata(pdev->dev.parent);
+	pdata = dev_get_platdata(rtc->da9055->dev);
+	platform_set_drvdata(pdev, rtc);
+
+	ret = da9055_rtc_device_init(rtc->da9055, pdata);
+	if (ret < 0)
+		goto err_rtc;
+
+	ret = da9055_reg_read(rtc->da9055, DA9055_REG_ALARM_Y);
+	if (ret < 0)
+		goto err_rtc;
+
+	if (ret & DA9055_RTC_ALM_EN)
+		rtc->alarm_enable = 1;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&da9055_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		goto err_rtc;
+	}
+
+	alm_irq = platform_get_irq_byname(pdev, "ALM");
+	if (alm_irq < 0)
+		return alm_irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, alm_irq, NULL,
+					da9055_rtc_alm_irq,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"ALM", rtc);
+	if (ret != 0)
+		dev_err(rtc->da9055->dev, "irq registration failed: %d\n", ret);
+
+err_rtc:
+	return ret;
+
+}
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int da9055_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct da9055_rtc *rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (!device_may_wakeup(&pdev->dev)) {
+		/* Disable the ALM IRQ */
+		ret = da9055_rtc_enable_alarm(rtc, 0);
+		if (ret < 0)
+			dev_err(&pdev->dev, "Failed to disable RTC ALM\n");
+	}
+
+	return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int da9055_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct da9055_rtc *rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (!device_may_wakeup(&pdev->dev)) {
+		if (rtc->alarm_enable) {
+			ret = da9055_rtc_enable_alarm(rtc, 1);
+			if (ret < 0)
+				dev_err(&pdev->dev,
+					"Failed to restart RTC ALM\n");
+		}
+	}
+
+	return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int da9055_rtc_freeze(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct da9055_rtc *rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	ret = da9055_rtc_enable_alarm(rtc, 0);
+	if (ret < 0)
+		dev_err(&pdev->dev, "Failed to freeze RTC ALMs\n");
+
+	return 0;
+
+}
+#else
+#define da9055_rtc_suspend NULL
+#define da9055_rtc_resume NULL
+#define da9055_rtc_freeze NULL
+#endif
+
+static const struct dev_pm_ops da9055_rtc_pm_ops = {
+	.suspend = da9055_rtc_suspend,
+	.resume = da9055_rtc_resume,
+
+	.freeze = da9055_rtc_freeze,
+	.thaw = da9055_rtc_resume,
+	.restore = da9055_rtc_resume,
+
+	.poweroff = da9055_rtc_suspend,
+};
+
+static struct platform_driver da9055_rtc_driver = {
+	.probe  = da9055_rtc_probe,
+	.driver = {
+		.name   = "da9055-rtc",
+		.pm = &da9055_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(da9055_rtc_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("RTC driver for Dialog DA9055 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-da9063.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9063.c
new file mode 100644
index 0000000..7e92e49
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-da9063.c
@@ -0,0 +1,515 @@
+/* rtc-da9063.c - Real time clock device driver for DA9063
+ * Copyright (C) 2013-2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/da9062/registers.h>
+#include <linux/mfd/da9063/registers.h>
+#include <linux/mfd/da9063/core.h>
+
+#define YEARS_TO_DA9063(year)		((year) - 100)
+#define MONTHS_TO_DA9063(month)		((month) + 1)
+#define YEARS_FROM_DA9063(year)		((year) + 100)
+#define MONTHS_FROM_DA9063(month)	((month) - 1)
+
+enum {
+	RTC_SEC	= 0,
+	RTC_MIN	= 1,
+	RTC_HOUR = 2,
+	RTC_DAY	= 3,
+	RTC_MONTH = 4,
+	RTC_YEAR = 5,
+	RTC_DATA_LEN
+};
+
+struct da9063_compatible_rtc_regmap {
+	/* REGS */
+	int rtc_enable_reg;
+	int rtc_enable_32k_crystal_reg;
+	int rtc_alarm_secs_reg;
+	int rtc_alarm_year_reg;
+	int rtc_count_secs_reg;
+	int rtc_count_year_reg;
+	int rtc_event_reg;
+	/* MASKS */
+	int rtc_enable_mask;
+	int rtc_crystal_mask;
+	int rtc_event_alarm_mask;
+	int rtc_alarm_on_mask;
+	int rtc_alarm_status_mask;
+	int rtc_tick_on_mask;
+	int rtc_ready_to_read_mask;
+	int rtc_count_sec_mask;
+	int rtc_count_min_mask;
+	int rtc_count_hour_mask;
+	int rtc_count_day_mask;
+	int rtc_count_month_mask;
+	int rtc_count_year_mask;
+	/* ALARM CONFIG */
+	int rtc_data_start;
+	int rtc_alarm_len;
+};
+
+struct da9063_compatible_rtc {
+	struct rtc_device *rtc_dev;
+	struct rtc_time alarm_time;
+	struct regmap *regmap;
+	const struct da9063_compatible_rtc_regmap *config;
+	bool rtc_sync;
+};
+
+static const struct da9063_compatible_rtc_regmap da9063_ad_regs = {
+	/* REGS */
+	.rtc_enable_reg             = DA9063_REG_CONTROL_E,
+	.rtc_alarm_secs_reg         = DA9063_AD_REG_ALARM_MI,
+	.rtc_alarm_year_reg         = DA9063_AD_REG_ALARM_Y,
+	.rtc_count_secs_reg         = DA9063_REG_COUNT_S,
+	.rtc_count_year_reg         = DA9063_REG_COUNT_Y,
+	.rtc_event_reg              = DA9063_REG_EVENT_A,
+	/* MASKS */
+	.rtc_enable_mask            = DA9063_RTC_EN,
+	.rtc_crystal_mask           = DA9063_CRYSTAL,
+	.rtc_enable_32k_crystal_reg = DA9063_REG_EN_32K,
+	.rtc_event_alarm_mask       = DA9063_E_ALARM,
+	.rtc_alarm_on_mask          = DA9063_ALARM_ON,
+	.rtc_alarm_status_mask      = DA9063_ALARM_STATUS_ALARM |
+				      DA9063_ALARM_STATUS_TICK,
+	.rtc_tick_on_mask           = DA9063_TICK_ON,
+	.rtc_ready_to_read_mask     = DA9063_RTC_READ,
+	.rtc_count_sec_mask         = DA9063_COUNT_SEC_MASK,
+	.rtc_count_min_mask         = DA9063_COUNT_MIN_MASK,
+	.rtc_count_hour_mask        = DA9063_COUNT_HOUR_MASK,
+	.rtc_count_day_mask         = DA9063_COUNT_DAY_MASK,
+	.rtc_count_month_mask       = DA9063_COUNT_MONTH_MASK,
+	.rtc_count_year_mask        = DA9063_COUNT_YEAR_MASK,
+	/* ALARM CONFIG */
+	.rtc_data_start             = RTC_MIN,
+	.rtc_alarm_len              = RTC_DATA_LEN - 1,
+};
+
+static const struct da9063_compatible_rtc_regmap da9063_bb_regs = {
+	/* REGS */
+	.rtc_enable_reg             = DA9063_REG_CONTROL_E,
+	.rtc_alarm_secs_reg         = DA9063_BB_REG_ALARM_S,
+	.rtc_alarm_year_reg         = DA9063_BB_REG_ALARM_Y,
+	.rtc_count_secs_reg         = DA9063_REG_COUNT_S,
+	.rtc_count_year_reg         = DA9063_REG_COUNT_Y,
+	.rtc_event_reg              = DA9063_REG_EVENT_A,
+	/* MASKS */
+	.rtc_enable_mask            = DA9063_RTC_EN,
+	.rtc_crystal_mask           = DA9063_CRYSTAL,
+	.rtc_enable_32k_crystal_reg = DA9063_REG_EN_32K,
+	.rtc_event_alarm_mask       = DA9063_E_ALARM,
+	.rtc_alarm_on_mask          = DA9063_ALARM_ON,
+	.rtc_alarm_status_mask      = DA9063_ALARM_STATUS_ALARM |
+				      DA9063_ALARM_STATUS_TICK,
+	.rtc_tick_on_mask           = DA9063_TICK_ON,
+	.rtc_ready_to_read_mask     = DA9063_RTC_READ,
+	.rtc_count_sec_mask         = DA9063_COUNT_SEC_MASK,
+	.rtc_count_min_mask         = DA9063_COUNT_MIN_MASK,
+	.rtc_count_hour_mask        = DA9063_COUNT_HOUR_MASK,
+	.rtc_count_day_mask         = DA9063_COUNT_DAY_MASK,
+	.rtc_count_month_mask       = DA9063_COUNT_MONTH_MASK,
+	.rtc_count_year_mask        = DA9063_COUNT_YEAR_MASK,
+	/* ALARM CONFIG */
+	.rtc_data_start             = RTC_SEC,
+	.rtc_alarm_len              = RTC_DATA_LEN,
+};
+
+static const struct da9063_compatible_rtc_regmap da9062_aa_regs = {
+	/* REGS */
+	.rtc_enable_reg             = DA9062AA_CONTROL_E,
+	.rtc_alarm_secs_reg         = DA9062AA_ALARM_S,
+	.rtc_alarm_year_reg         = DA9062AA_ALARM_Y,
+	.rtc_count_secs_reg         = DA9062AA_COUNT_S,
+	.rtc_count_year_reg         = DA9062AA_COUNT_Y,
+	.rtc_event_reg              = DA9062AA_EVENT_A,
+	/* MASKS */
+	.rtc_enable_mask            = DA9062AA_RTC_EN_MASK,
+	.rtc_crystal_mask           = DA9062AA_CRYSTAL_MASK,
+	.rtc_enable_32k_crystal_reg = DA9062AA_EN_32K,
+	.rtc_event_alarm_mask       = DA9062AA_M_ALARM_MASK,
+	.rtc_alarm_on_mask          = DA9062AA_ALARM_ON_MASK,
+	.rtc_alarm_status_mask      = (0x02 << 6),
+	.rtc_tick_on_mask           = DA9062AA_TICK_ON_MASK,
+	.rtc_ready_to_read_mask     = DA9062AA_RTC_READ_MASK,
+	.rtc_count_sec_mask         = DA9062AA_COUNT_SEC_MASK,
+	.rtc_count_min_mask         = DA9062AA_COUNT_MIN_MASK,
+	.rtc_count_hour_mask        = DA9062AA_COUNT_HOUR_MASK,
+	.rtc_count_day_mask         = DA9062AA_COUNT_DAY_MASK,
+	.rtc_count_month_mask       = DA9062AA_COUNT_MONTH_MASK,
+	.rtc_count_year_mask        = DA9062AA_COUNT_YEAR_MASK,
+	/* ALARM CONFIG */
+	.rtc_data_start             = RTC_SEC,
+	.rtc_alarm_len              = RTC_DATA_LEN,
+};
+
+static const struct of_device_id da9063_compatible_reg_id_table[] = {
+	{ .compatible = "dlg,da9063-rtc", .data = &da9063_bb_regs },
+	{ .compatible = "dlg,da9062-rtc", .data = &da9062_aa_regs },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
+
+static void da9063_data_to_tm(u8 *data, struct rtc_time *tm,
+			      struct da9063_compatible_rtc *rtc)
+{
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+
+	tm->tm_sec  = data[RTC_SEC]  & config->rtc_count_sec_mask;
+	tm->tm_min  = data[RTC_MIN]  & config->rtc_count_min_mask;
+	tm->tm_hour = data[RTC_HOUR] & config->rtc_count_hour_mask;
+	tm->tm_mday = data[RTC_DAY]  & config->rtc_count_day_mask;
+	tm->tm_mon  = MONTHS_FROM_DA9063(data[RTC_MONTH] &
+					 config->rtc_count_month_mask);
+	tm->tm_year = YEARS_FROM_DA9063(data[RTC_YEAR] &
+					config->rtc_count_year_mask);
+}
+
+static void da9063_tm_to_data(struct rtc_time *tm, u8 *data,
+			      struct da9063_compatible_rtc *rtc)
+{
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+
+	data[RTC_SEC]   = tm->tm_sec & config->rtc_count_sec_mask;
+	data[RTC_MIN]   = tm->tm_min & config->rtc_count_min_mask;
+	data[RTC_HOUR]  = tm->tm_hour & config->rtc_count_hour_mask;
+	data[RTC_DAY]   = tm->tm_mday & config->rtc_count_day_mask;
+	data[RTC_MONTH] = MONTHS_TO_DA9063(tm->tm_mon) &
+				config->rtc_count_month_mask;
+	data[RTC_YEAR]  = YEARS_TO_DA9063(tm->tm_year) &
+				config->rtc_count_year_mask;
+}
+
+static int da9063_rtc_stop_alarm(struct device *dev)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+
+	return regmap_update_bits(rtc->regmap,
+				  config->rtc_alarm_year_reg,
+				  config->rtc_alarm_on_mask,
+				  0);
+}
+
+static int da9063_rtc_start_alarm(struct device *dev)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+
+	return regmap_update_bits(rtc->regmap,
+				  config->rtc_alarm_year_reg,
+				  config->rtc_alarm_on_mask,
+				  config->rtc_alarm_on_mask);
+}
+
+static int da9063_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+	unsigned long tm_secs;
+	unsigned long al_secs;
+	u8 data[RTC_DATA_LEN];
+	int ret;
+
+	ret = regmap_bulk_read(rtc->regmap,
+			       config->rtc_count_secs_reg,
+			       data, RTC_DATA_LEN);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC time data: %d\n", ret);
+		return ret;
+	}
+
+	if (!(data[RTC_SEC] & config->rtc_ready_to_read_mask)) {
+		dev_dbg(dev, "RTC not yet ready to be read by the host\n");
+		return -EINVAL;
+	}
+
+	da9063_data_to_tm(data, tm, rtc);
+
+	rtc_tm_to_time(tm, &tm_secs);
+	rtc_tm_to_time(&rtc->alarm_time, &al_secs);
+
+	/* handle the rtc synchronisation delay */
+	if (rtc->rtc_sync == true && al_secs - tm_secs == 1)
+		memcpy(tm, &rtc->alarm_time, sizeof(struct rtc_time));
+	else
+		rtc->rtc_sync = false;
+
+	return rtc_valid_tm(tm);
+}
+
+static int da9063_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+	u8 data[RTC_DATA_LEN];
+	int ret;
+
+	da9063_tm_to_data(tm, data, rtc);
+	ret = regmap_bulk_write(rtc->regmap,
+				config->rtc_count_secs_reg,
+				data, RTC_DATA_LEN);
+	if (ret < 0)
+		dev_err(dev, "Failed to set RTC time data: %d\n", ret);
+
+	return ret;
+}
+
+static int da9063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+	u8 data[RTC_DATA_LEN];
+	int ret;
+	unsigned int val;
+
+	data[RTC_SEC] = 0;
+	ret = regmap_bulk_read(rtc->regmap,
+			       config->rtc_alarm_secs_reg,
+			       &data[config->rtc_data_start],
+			       config->rtc_alarm_len);
+	if (ret < 0)
+		return ret;
+
+	da9063_data_to_tm(data, &alrm->time, rtc);
+
+	alrm->enabled = !!(data[RTC_YEAR] & config->rtc_alarm_on_mask);
+
+	ret = regmap_read(rtc->regmap,
+			  config->rtc_event_reg,
+			  &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & config->rtc_event_alarm_mask)
+		alrm->pending = 1;
+	else
+		alrm->pending = 0;
+
+	return 0;
+}
+
+static int da9063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct da9063_compatible_rtc *rtc = dev_get_drvdata(dev);
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+	u8 data[RTC_DATA_LEN];
+	int ret;
+
+	da9063_tm_to_data(&alrm->time, data, rtc);
+
+	ret = da9063_rtc_stop_alarm(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to stop alarm: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_bulk_write(rtc->regmap,
+				config->rtc_alarm_secs_reg,
+				&data[config->rtc_data_start],
+				config->rtc_alarm_len);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write alarm: %d\n", ret);
+		return ret;
+	}
+
+	da9063_data_to_tm(data, &rtc->alarm_time, rtc);
+
+	if (alrm->enabled) {
+		ret = da9063_rtc_start_alarm(dev);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start alarm: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int da9063_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	if (enabled)
+		return da9063_rtc_start_alarm(dev);
+	else
+		return da9063_rtc_stop_alarm(dev);
+}
+
+static irqreturn_t da9063_alarm_event(int irq, void *data)
+{
+	struct da9063_compatible_rtc *rtc = data;
+	const struct da9063_compatible_rtc_regmap *config = rtc->config;
+
+	regmap_update_bits(rtc->regmap,
+			   config->rtc_alarm_year_reg,
+			   config->rtc_alarm_on_mask,
+			   0);
+
+	rtc->rtc_sync = true;
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops da9063_rtc_ops = {
+	.read_time = da9063_rtc_read_time,
+	.set_time = da9063_rtc_set_time,
+	.read_alarm = da9063_rtc_read_alarm,
+	.set_alarm = da9063_rtc_set_alarm,
+	.alarm_irq_enable = da9063_rtc_alarm_irq_enable,
+};
+
+static int da9063_rtc_probe(struct platform_device *pdev)
+{
+	struct da9063_compatible_rtc *rtc;
+	const struct da9063_compatible_rtc_regmap *config;
+	const struct of_device_id *match;
+	int irq_alarm;
+	u8 data[RTC_DATA_LEN];
+	int ret;
+
+	if (!pdev->dev.of_node)
+		return -ENXIO;
+
+	match = of_match_node(da9063_compatible_reg_id_table,
+			      pdev->dev.of_node);
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->config = match->data;
+	if (of_device_is_compatible(pdev->dev.of_node, "dlg,da9063-rtc")) {
+		struct da9063 *chip = dev_get_drvdata(pdev->dev.parent);
+
+		if (chip->variant_code == PMIC_DA9063_AD)
+			rtc->config = &da9063_ad_regs;
+	}
+
+	rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rtc->regmap) {
+		dev_warn(&pdev->dev, "Parent regmap unavailable.\n");
+		return -ENXIO;
+	}
+
+	config = rtc->config;
+	ret = regmap_update_bits(rtc->regmap,
+				 config->rtc_enable_reg,
+				 config->rtc_enable_mask,
+				 config->rtc_enable_mask);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to enable RTC\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(rtc->regmap,
+				 config->rtc_enable_32k_crystal_reg,
+				 config->rtc_crystal_mask,
+				 config->rtc_crystal_mask);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to run 32kHz oscillator\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(rtc->regmap,
+				 config->rtc_alarm_secs_reg,
+				 config->rtc_alarm_status_mask,
+				 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(rtc->regmap,
+				 config->rtc_alarm_secs_reg,
+				 DA9063_ALARM_STATUS_ALARM,
+				 DA9063_ALARM_STATUS_ALARM);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(rtc->regmap,
+				 config->rtc_alarm_year_reg,
+				 config->rtc_tick_on_mask,
+				 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to disable TICKs\n");
+		return ret;
+	}
+
+	data[RTC_SEC] = 0;
+	ret = regmap_bulk_read(rtc->regmap,
+			       config->rtc_alarm_secs_reg,
+			       &data[config->rtc_data_start],
+			       config->rtc_alarm_len);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
+			ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, DA9063_DRVNAME_RTC,
+					   &da9063_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	da9063_data_to_tm(data, &rtc->alarm_time, rtc);
+	rtc->rtc_sync = false;
+
+	/*
+	 * TODO: some models have alarms on a minute boundary but still support
+	 * real hardware interrupts. Add this once the core supports it.
+	 */
+	if (config->rtc_data_start != RTC_SEC)
+		rtc->rtc_dev->uie_unsupported = 1;
+
+	irq_alarm = platform_get_irq_byname(pdev, "ALARM");
+	ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
+					da9063_alarm_event,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"ALARM", rtc);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to request ALARM IRQ %d: %d\n",
+			irq_alarm, ret);
+
+	return ret;
+}
+
+static struct platform_driver da9063_rtc_driver = {
+	.probe		= da9063_rtc_probe,
+	.driver		= {
+		.name	= DA9063_DRVNAME_RTC,
+		.of_match_table = da9063_compatible_reg_id_table,
+	},
+};
+
+module_platform_driver(da9063_rtc_driver);
+
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Real time clock device driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_RTC);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-davinci.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-davinci.c
new file mode 100644
index 0000000..caf3556
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-davinci.c
@@ -0,0 +1,561 @@
+/*
+ * DaVinci Power Management and Real Time Clock Driver for TI platforms
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * The DaVinci RTC is a simple RTC with the following
+ * Sec: 0 - 59 : BCD count
+ * Min: 0 - 59 : BCD count
+ * Hour: 0 - 23 : BCD count
+ * Day: 0 - 0x7FFF(32767) : Binary count ( Over 89 years )
+ */
+
+/* PRTC interface registers */
+#define DAVINCI_PRTCIF_PID		0x00
+#define PRTCIF_CTLR			0x04
+#define PRTCIF_LDATA			0x08
+#define PRTCIF_UDATA			0x0C
+#define PRTCIF_INTEN			0x10
+#define PRTCIF_INTFLG			0x14
+
+/* PRTCIF_CTLR bit fields */
+#define PRTCIF_CTLR_BUSY		BIT(31)
+#define PRTCIF_CTLR_SIZE		BIT(25)
+#define PRTCIF_CTLR_DIR			BIT(24)
+#define PRTCIF_CTLR_BENU_MSB		BIT(23)
+#define PRTCIF_CTLR_BENU_3RD_BYTE	BIT(22)
+#define PRTCIF_CTLR_BENU_2ND_BYTE	BIT(21)
+#define PRTCIF_CTLR_BENU_LSB		BIT(20)
+#define PRTCIF_CTLR_BENU_MASK		(0x00F00000)
+#define PRTCIF_CTLR_BENL_MSB		BIT(19)
+#define PRTCIF_CTLR_BENL_3RD_BYTE	BIT(18)
+#define PRTCIF_CTLR_BENL_2ND_BYTE	BIT(17)
+#define PRTCIF_CTLR_BENL_LSB		BIT(16)
+#define PRTCIF_CTLR_BENL_MASK		(0x000F0000)
+
+/* PRTCIF_INTEN bit fields */
+#define PRTCIF_INTEN_RTCSS		BIT(1)
+#define PRTCIF_INTEN_RTCIF		BIT(0)
+#define PRTCIF_INTEN_MASK		(PRTCIF_INTEN_RTCSS \
+					| PRTCIF_INTEN_RTCIF)
+
+/* PRTCIF_INTFLG bit fields */
+#define PRTCIF_INTFLG_RTCSS		BIT(1)
+#define PRTCIF_INTFLG_RTCIF		BIT(0)
+#define PRTCIF_INTFLG_MASK		(PRTCIF_INTFLG_RTCSS \
+					| PRTCIF_INTFLG_RTCIF)
+
+/* PRTC subsystem registers */
+#define PRTCSS_RTC_INTC_EXTENA1		(0x0C)
+#define PRTCSS_RTC_CTRL			(0x10)
+#define PRTCSS_RTC_WDT			(0x11)
+#define PRTCSS_RTC_TMR0			(0x12)
+#define PRTCSS_RTC_TMR1			(0x13)
+#define PRTCSS_RTC_CCTRL		(0x14)
+#define PRTCSS_RTC_SEC			(0x15)
+#define PRTCSS_RTC_MIN			(0x16)
+#define PRTCSS_RTC_HOUR			(0x17)
+#define PRTCSS_RTC_DAY0			(0x18)
+#define PRTCSS_RTC_DAY1			(0x19)
+#define PRTCSS_RTC_AMIN			(0x1A)
+#define PRTCSS_RTC_AHOUR		(0x1B)
+#define PRTCSS_RTC_ADAY0		(0x1C)
+#define PRTCSS_RTC_ADAY1		(0x1D)
+#define PRTCSS_RTC_CLKC_CNT		(0x20)
+
+/* PRTCSS_RTC_INTC_EXTENA1 */
+#define PRTCSS_RTC_INTC_EXTENA1_MASK	(0x07)
+
+/* PRTCSS_RTC_CTRL bit fields */
+#define PRTCSS_RTC_CTRL_WDTBUS		BIT(7)
+#define PRTCSS_RTC_CTRL_WEN		BIT(6)
+#define PRTCSS_RTC_CTRL_WDRT		BIT(5)
+#define PRTCSS_RTC_CTRL_WDTFLG		BIT(4)
+#define PRTCSS_RTC_CTRL_TE		BIT(3)
+#define PRTCSS_RTC_CTRL_TIEN		BIT(2)
+#define PRTCSS_RTC_CTRL_TMRFLG		BIT(1)
+#define PRTCSS_RTC_CTRL_TMMD		BIT(0)
+
+/* PRTCSS_RTC_CCTRL bit fields */
+#define PRTCSS_RTC_CCTRL_CALBUSY	BIT(7)
+#define PRTCSS_RTC_CCTRL_DAEN		BIT(5)
+#define PRTCSS_RTC_CCTRL_HAEN		BIT(4)
+#define PRTCSS_RTC_CCTRL_MAEN		BIT(3)
+#define PRTCSS_RTC_CCTRL_ALMFLG		BIT(2)
+#define PRTCSS_RTC_CCTRL_AIEN		BIT(1)
+#define PRTCSS_RTC_CCTRL_CAEN		BIT(0)
+
+static DEFINE_SPINLOCK(davinci_rtc_lock);
+
+struct davinci_rtc {
+	struct rtc_device		*rtc;
+	void __iomem			*base;
+	int				irq;
+};
+
+static inline void rtcif_write(struct davinci_rtc *davinci_rtc,
+			       u32 val, u32 addr)
+{
+	writel(val, davinci_rtc->base + addr);
+}
+
+static inline u32 rtcif_read(struct davinci_rtc *davinci_rtc, u32 addr)
+{
+	return readl(davinci_rtc->base + addr);
+}
+
+static inline void rtcif_wait(struct davinci_rtc *davinci_rtc)
+{
+	while (rtcif_read(davinci_rtc, PRTCIF_CTLR) & PRTCIF_CTLR_BUSY)
+		cpu_relax();
+}
+
+static inline void rtcss_write(struct davinci_rtc *davinci_rtc,
+			       unsigned long val, u8 addr)
+{
+	rtcif_wait(davinci_rtc);
+
+	rtcif_write(davinci_rtc, PRTCIF_CTLR_BENL_LSB | addr, PRTCIF_CTLR);
+	rtcif_write(davinci_rtc, val, PRTCIF_LDATA);
+
+	rtcif_wait(davinci_rtc);
+}
+
+static inline u8 rtcss_read(struct davinci_rtc *davinci_rtc, u8 addr)
+{
+	rtcif_wait(davinci_rtc);
+
+	rtcif_write(davinci_rtc, PRTCIF_CTLR_DIR | PRTCIF_CTLR_BENL_LSB | addr,
+		    PRTCIF_CTLR);
+
+	rtcif_wait(davinci_rtc);
+
+	return rtcif_read(davinci_rtc, PRTCIF_LDATA);
+}
+
+static inline void davinci_rtcss_calendar_wait(struct davinci_rtc *davinci_rtc)
+{
+	while (rtcss_read(davinci_rtc, PRTCSS_RTC_CCTRL) &
+	       PRTCSS_RTC_CCTRL_CALBUSY)
+		cpu_relax();
+}
+
+static irqreturn_t davinci_rtc_interrupt(int irq, void *class_dev)
+{
+	struct davinci_rtc *davinci_rtc = class_dev;
+	unsigned long events = 0;
+	u32 irq_flg;
+	u8 alm_irq, tmr_irq;
+	u8 rtc_ctrl, rtc_cctrl;
+	int ret = IRQ_NONE;
+
+	irq_flg = rtcif_read(davinci_rtc, PRTCIF_INTFLG) &
+		  PRTCIF_INTFLG_RTCSS;
+
+	alm_irq = rtcss_read(davinci_rtc, PRTCSS_RTC_CCTRL) &
+		  PRTCSS_RTC_CCTRL_ALMFLG;
+
+	tmr_irq = rtcss_read(davinci_rtc, PRTCSS_RTC_CTRL) &
+		  PRTCSS_RTC_CTRL_TMRFLG;
+
+	if (irq_flg) {
+		if (alm_irq) {
+			events |= RTC_IRQF | RTC_AF;
+			rtc_cctrl = rtcss_read(davinci_rtc, PRTCSS_RTC_CCTRL);
+			rtc_cctrl |=  PRTCSS_RTC_CCTRL_ALMFLG;
+			rtcss_write(davinci_rtc, rtc_cctrl, PRTCSS_RTC_CCTRL);
+		} else if (tmr_irq) {
+			events |= RTC_IRQF | RTC_PF;
+			rtc_ctrl = rtcss_read(davinci_rtc, PRTCSS_RTC_CTRL);
+			rtc_ctrl |=  PRTCSS_RTC_CTRL_TMRFLG;
+			rtcss_write(davinci_rtc, rtc_ctrl, PRTCSS_RTC_CTRL);
+		}
+
+		rtcif_write(davinci_rtc, PRTCIF_INTFLG_RTCSS,
+				    PRTCIF_INTFLG);
+		rtc_update_irq(davinci_rtc->rtc, 1, events);
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int
+davinci_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	u8 rtc_ctrl;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	rtc_ctrl = rtcss_read(davinci_rtc, PRTCSS_RTC_CTRL);
+
+	switch (cmd) {
+	case RTC_WIE_ON:
+		rtc_ctrl |= PRTCSS_RTC_CTRL_WEN | PRTCSS_RTC_CTRL_WDTFLG;
+		break;
+	case RTC_WIE_OFF:
+		rtc_ctrl &= ~PRTCSS_RTC_CTRL_WEN;
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+	}
+
+	rtcss_write(davinci_rtc, rtc_ctrl, PRTCSS_RTC_CTRL);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+
+	return ret;
+}
+
+static int convertfromdays(u16 days, struct rtc_time *tm)
+{
+	int tmp_days, year, mon;
+
+	for (year = 2000;; year++) {
+		tmp_days = rtc_year_days(1, 12, year);
+		if (days >= tmp_days)
+			days -= tmp_days;
+		else {
+			for (mon = 0;; mon++) {
+				tmp_days = rtc_month_days(mon, year);
+				if (days >= tmp_days) {
+					days -= tmp_days;
+				} else {
+					tm->tm_year = year - 1900;
+					tm->tm_mon = mon;
+					tm->tm_mday = days + 1;
+					break;
+				}
+			}
+			break;
+		}
+	}
+	return 0;
+}
+
+static int convert2days(u16 *days, struct rtc_time *tm)
+{
+	int i;
+	*days = 0;
+
+	/* epoch == 1900 */
+	if (tm->tm_year < 100 || tm->tm_year > 199)
+		return -EINVAL;
+
+	for (i = 2000; i < 1900 + tm->tm_year; i++)
+		*days += rtc_year_days(1, 12, i);
+
+	*days += rtc_year_days(tm->tm_mday, tm->tm_mon, 1900 + tm->tm_year);
+
+	return 0;
+}
+
+static int davinci_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	u16 days = 0;
+	u8 day0, day1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	tm->tm_sec = bcd2bin(rtcss_read(davinci_rtc, PRTCSS_RTC_SEC));
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	tm->tm_min = bcd2bin(rtcss_read(davinci_rtc, PRTCSS_RTC_MIN));
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	tm->tm_hour = bcd2bin(rtcss_read(davinci_rtc, PRTCSS_RTC_HOUR));
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	day0 = rtcss_read(davinci_rtc, PRTCSS_RTC_DAY0);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	day1 = rtcss_read(davinci_rtc, PRTCSS_RTC_DAY1);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+
+	days |= day1;
+	days <<= 8;
+	days |= day0;
+
+	if (convertfromdays(days, tm) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int davinci_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	u16 days;
+	u8 rtc_cctrl;
+	unsigned long flags;
+
+	if (convert2days(&days, tm) < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, bin2bcd(tm->tm_sec), PRTCSS_RTC_SEC);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, bin2bcd(tm->tm_min), PRTCSS_RTC_MIN);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, bin2bcd(tm->tm_hour), PRTCSS_RTC_HOUR);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, days & 0xFF, PRTCSS_RTC_DAY0);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, (days & 0xFF00) >> 8, PRTCSS_RTC_DAY1);
+
+	rtc_cctrl = rtcss_read(davinci_rtc, PRTCSS_RTC_CCTRL);
+	rtc_cctrl |= PRTCSS_RTC_CCTRL_CAEN;
+	rtcss_write(davinci_rtc, rtc_cctrl, PRTCSS_RTC_CCTRL);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+
+	return 0;
+}
+
+static int davinci_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+	u8 rtc_cctrl = rtcss_read(davinci_rtc, PRTCSS_RTC_CCTRL);
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	if (enabled)
+		rtc_cctrl |= PRTCSS_RTC_CCTRL_DAEN |
+			     PRTCSS_RTC_CCTRL_HAEN |
+			     PRTCSS_RTC_CCTRL_MAEN |
+			     PRTCSS_RTC_CCTRL_ALMFLG |
+			     PRTCSS_RTC_CCTRL_AIEN;
+	else
+		rtc_cctrl &= ~PRTCSS_RTC_CCTRL_AIEN;
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, rtc_cctrl, PRTCSS_RTC_CCTRL);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+
+	return 0;
+}
+
+static int davinci_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	u16 days = 0;
+	u8 day0, day1;
+	unsigned long flags;
+
+	alm->time.tm_sec = 0;
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	alm->time.tm_min = bcd2bin(rtcss_read(davinci_rtc, PRTCSS_RTC_AMIN));
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	alm->time.tm_hour = bcd2bin(rtcss_read(davinci_rtc, PRTCSS_RTC_AHOUR));
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	day0 = rtcss_read(davinci_rtc, PRTCSS_RTC_ADAY0);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	day1 = rtcss_read(davinci_rtc, PRTCSS_RTC_ADAY1);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+	days |= day1;
+	days <<= 8;
+	days |= day0;
+
+	if (convertfromdays(days, &alm->time) < 0)
+		return -EINVAL;
+
+	alm->pending = !!(rtcss_read(davinci_rtc,
+			  PRTCSS_RTC_CCTRL) &
+			PRTCSS_RTC_CCTRL_AIEN);
+	alm->enabled = alm->pending && device_may_wakeup(dev);
+
+	return 0;
+}
+
+static int davinci_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct davinci_rtc *davinci_rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+	u16 days;
+
+	if (alm->time.tm_mday <= 0 && alm->time.tm_mon < 0
+	    && alm->time.tm_year < 0) {
+		struct rtc_time tm;
+		unsigned long now, then;
+
+		davinci_rtc_read_time(dev, &tm);
+		rtc_tm_to_time(&tm, &now);
+
+		alm->time.tm_mday = tm.tm_mday;
+		alm->time.tm_mon = tm.tm_mon;
+		alm->time.tm_year = tm.tm_year;
+		rtc_tm_to_time(&alm->time, &then);
+
+		if (then < now) {
+			rtc_time_to_tm(now + 24 * 60 * 60, &tm);
+			alm->time.tm_mday = tm.tm_mday;
+			alm->time.tm_mon = tm.tm_mon;
+			alm->time.tm_year = tm.tm_year;
+		}
+	}
+
+	if (convert2days(&days, &alm->time) < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&davinci_rtc_lock, flags);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, bin2bcd(alm->time.tm_min), PRTCSS_RTC_AMIN);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, bin2bcd(alm->time.tm_hour), PRTCSS_RTC_AHOUR);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, days & 0xFF, PRTCSS_RTC_ADAY0);
+
+	davinci_rtcss_calendar_wait(davinci_rtc);
+	rtcss_write(davinci_rtc, (days & 0xFF00) >> 8, PRTCSS_RTC_ADAY1);
+
+	spin_unlock_irqrestore(&davinci_rtc_lock, flags);
+
+	return 0;
+}
+
+static const struct rtc_class_ops davinci_rtc_ops = {
+	.ioctl			= davinci_rtc_ioctl,
+	.read_time		= davinci_rtc_read_time,
+	.set_time		= davinci_rtc_set_time,
+	.alarm_irq_enable	= davinci_rtc_alarm_irq_enable,
+	.read_alarm		= davinci_rtc_read_alarm,
+	.set_alarm		= davinci_rtc_set_alarm,
+};
+
+static int __init davinci_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct davinci_rtc *davinci_rtc;
+	struct resource *res;
+	int ret = 0;
+
+	davinci_rtc = devm_kzalloc(&pdev->dev, sizeof(struct davinci_rtc), GFP_KERNEL);
+	if (!davinci_rtc)
+		return -ENOMEM;
+
+	davinci_rtc->irq = platform_get_irq(pdev, 0);
+	if (davinci_rtc->irq < 0) {
+		dev_err(dev, "no RTC irq\n");
+		return davinci_rtc->irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	davinci_rtc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(davinci_rtc->base))
+		return PTR_ERR(davinci_rtc->base);
+
+	platform_set_drvdata(pdev, davinci_rtc);
+
+	davinci_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				    &davinci_rtc_ops, THIS_MODULE);
+	if (IS_ERR(davinci_rtc->rtc)) {
+		dev_err(dev, "unable to register RTC device, err %d\n",
+				ret);
+		return PTR_ERR(davinci_rtc->rtc);
+	}
+
+	rtcif_write(davinci_rtc, PRTCIF_INTFLG_RTCSS, PRTCIF_INTFLG);
+	rtcif_write(davinci_rtc, 0, PRTCIF_INTEN);
+	rtcss_write(davinci_rtc, 0, PRTCSS_RTC_INTC_EXTENA1);
+
+	rtcss_write(davinci_rtc, 0, PRTCSS_RTC_CTRL);
+	rtcss_write(davinci_rtc, 0, PRTCSS_RTC_CCTRL);
+
+	ret = devm_request_irq(dev, davinci_rtc->irq, davinci_rtc_interrupt,
+			  0, "davinci_rtc", davinci_rtc);
+	if (ret < 0) {
+		dev_err(dev, "unable to register davinci RTC interrupt\n");
+		return ret;
+	}
+
+	/* Enable interrupts */
+	rtcif_write(davinci_rtc, PRTCIF_INTEN_RTCSS, PRTCIF_INTEN);
+	rtcss_write(davinci_rtc, PRTCSS_RTC_INTC_EXTENA1_MASK,
+			    PRTCSS_RTC_INTC_EXTENA1);
+
+	rtcss_write(davinci_rtc, PRTCSS_RTC_CCTRL_CAEN, PRTCSS_RTC_CCTRL);
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+static int __exit davinci_rtc_remove(struct platform_device *pdev)
+{
+	struct davinci_rtc *davinci_rtc = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	rtcif_write(davinci_rtc, 0, PRTCIF_INTEN);
+
+	return 0;
+}
+
+static struct platform_driver davinci_rtc_driver = {
+	.remove		= __exit_p(davinci_rtc_remove),
+	.driver		= {
+		.name = "rtc_davinci",
+	},
+};
+
+module_platform_driver_probe(davinci_rtc_driver, davinci_rtc_probe);
+
+MODULE_AUTHOR("Miguel Aguilar <miguel.aguilar@ridgerun.com>");
+MODULE_DESCRIPTION("Texas Instruments DaVinci PRTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-dev.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-dev.c
new file mode 100644
index 0000000..00efe24
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-dev.c
@@ -0,0 +1,483 @@
+/*
+ * RTC subsystem, dev interface
+ *
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on arch/arm/common/rtctime.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/sched/signal.h>
+#include "rtc-core.h"
+
+static dev_t rtc_devt;
+
+#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
+
+static int rtc_dev_open(struct inode *inode, struct file *file)
+{
+	struct rtc_device *rtc = container_of(inode->i_cdev,
+					struct rtc_device, char_dev);
+
+	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+		return -EBUSY;
+
+	file->private_data = rtc;
+
+	spin_lock_irq(&rtc->irq_lock);
+	rtc->irq_data = 0;
+	spin_unlock_irq(&rtc->irq_lock);
+
+	return 0;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+/*
+ * Routine to poll RTC seconds field for change as often as possible,
+ * after first RTC_UIE use timer to reduce polling
+ */
+static void rtc_uie_task(struct work_struct *work)
+{
+	struct rtc_device *rtc =
+		container_of(work, struct rtc_device, uie_task);
+	struct rtc_time tm;
+	int num = 0;
+	int err;
+
+	err = rtc_read_time(rtc, &tm);
+
+	spin_lock_irq(&rtc->irq_lock);
+	if (rtc->stop_uie_polling || err) {
+		rtc->uie_task_active = 0;
+	} else if (rtc->oldsecs != tm.tm_sec) {
+		num = (tm.tm_sec + 60 - rtc->oldsecs) % 60;
+		rtc->oldsecs = tm.tm_sec;
+		rtc->uie_timer.expires = jiffies + HZ - (HZ/10);
+		rtc->uie_timer_active = 1;
+		rtc->uie_task_active = 0;
+		add_timer(&rtc->uie_timer);
+	} else if (schedule_work(&rtc->uie_task) == 0) {
+		rtc->uie_task_active = 0;
+	}
+	spin_unlock_irq(&rtc->irq_lock);
+	if (num)
+		rtc_handle_legacy_irq(rtc, num, RTC_UF);
+}
+static void rtc_uie_timer(unsigned long data)
+{
+	struct rtc_device *rtc = (struct rtc_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->irq_lock, flags);
+	rtc->uie_timer_active = 0;
+	rtc->uie_task_active = 1;
+	if ((schedule_work(&rtc->uie_task) == 0))
+		rtc->uie_task_active = 0;
+	spin_unlock_irqrestore(&rtc->irq_lock, flags);
+}
+
+static int clear_uie(struct rtc_device *rtc)
+{
+	spin_lock_irq(&rtc->irq_lock);
+	if (rtc->uie_irq_active) {
+		rtc->stop_uie_polling = 1;
+		if (rtc->uie_timer_active) {
+			spin_unlock_irq(&rtc->irq_lock);
+			del_timer_sync(&rtc->uie_timer);
+			spin_lock_irq(&rtc->irq_lock);
+			rtc->uie_timer_active = 0;
+		}
+		if (rtc->uie_task_active) {
+			spin_unlock_irq(&rtc->irq_lock);
+			flush_scheduled_work();
+			spin_lock_irq(&rtc->irq_lock);
+		}
+		rtc->uie_irq_active = 0;
+	}
+	spin_unlock_irq(&rtc->irq_lock);
+	return 0;
+}
+
+static int set_uie(struct rtc_device *rtc)
+{
+	struct rtc_time tm;
+	int err;
+
+	err = rtc_read_time(rtc, &tm);
+	if (err)
+		return err;
+	spin_lock_irq(&rtc->irq_lock);
+	if (!rtc->uie_irq_active) {
+		rtc->uie_irq_active = 1;
+		rtc->stop_uie_polling = 0;
+		rtc->oldsecs = tm.tm_sec;
+		rtc->uie_task_active = 1;
+		if (schedule_work(&rtc->uie_task) == 0)
+			rtc->uie_task_active = 0;
+	}
+	rtc->irq_data = 0;
+	spin_unlock_irq(&rtc->irq_lock);
+	return 0;
+}
+
+int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc, unsigned int enabled)
+{
+	if (enabled)
+		return set_uie(rtc);
+	else
+		return clear_uie(rtc);
+}
+EXPORT_SYMBOL(rtc_dev_update_irq_enable_emul);
+
+#endif /* CONFIG_RTC_INTF_DEV_UIE_EMUL */
+
+static ssize_t
+rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct rtc_device *rtc = file->private_data;
+
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned long data;
+	ssize_t ret;
+
+	if (count != sizeof(unsigned int) && count < sizeof(unsigned long))
+		return -EINVAL;
+
+	add_wait_queue(&rtc->irq_queue, &wait);
+	do {
+		__set_current_state(TASK_INTERRUPTIBLE);
+
+		spin_lock_irq(&rtc->irq_lock);
+		data = rtc->irq_data;
+		rtc->irq_data = 0;
+		spin_unlock_irq(&rtc->irq_lock);
+
+		if (data != 0) {
+			ret = 0;
+			break;
+		}
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		schedule();
+	} while (1);
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&rtc->irq_queue, &wait);
+
+	if (ret == 0) {
+		/* Check for any data updates */
+		if (rtc->ops->read_callback)
+			data = rtc->ops->read_callback(rtc->dev.parent,
+						       data);
+
+		if (sizeof(int) != sizeof(long) &&
+		    count == sizeof(unsigned int))
+			ret = put_user(data, (unsigned int __user *)buf) ?:
+				sizeof(unsigned int);
+		else
+			ret = put_user(data, (unsigned long __user *)buf) ?:
+				sizeof(unsigned long);
+	}
+	return ret;
+}
+
+static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
+{
+	struct rtc_device *rtc = file->private_data;
+	unsigned long data;
+
+	poll_wait(file, &rtc->irq_queue, wait);
+
+	data = rtc->irq_data;
+
+	return (data != 0) ? (POLLIN | POLLRDNORM) : 0;
+}
+
+static long rtc_dev_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct rtc_device *rtc = file->private_data;
+	const struct rtc_class_ops *ops = rtc->ops;
+	struct rtc_time tm;
+	struct rtc_wkalrm alarm;
+	void __user *uarg = (void __user *) arg;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	/* check that the calling task has appropriate permissions
+	 * for certain ioctls. doing this check here is useful
+	 * to avoid duplicate code in each driver.
+	 */
+	switch (cmd) {
+	case RTC_EPOCH_SET:
+	case RTC_SET_TIME:
+		if (!capable(CAP_SYS_TIME))
+			err = -EACCES;
+		break;
+
+	case RTC_IRQP_SET:
+		if (arg > rtc->max_user_freq && !capable(CAP_SYS_RESOURCE))
+			err = -EACCES;
+		break;
+
+	case RTC_PIE_ON:
+		if (rtc->irq_freq > rtc->max_user_freq &&
+				!capable(CAP_SYS_RESOURCE))
+			err = -EACCES;
+		break;
+	}
+
+	if (err)
+		goto done;
+
+	/*
+	 * Drivers *SHOULD NOT* provide ioctl implementations
+	 * for these requests.  Instead, provide methods to
+	 * support the following code, so that the RTC's main
+	 * features are accessible without using ioctls.
+	 *
+	 * RTC and alarm times will be in UTC, by preference,
+	 * but dual-booting with MS-Windows implies RTCs must
+	 * use the local wall clock time.
+	 */
+
+	switch (cmd) {
+	case RTC_ALM_READ:
+		mutex_unlock(&rtc->ops_lock);
+
+		err = rtc_read_alarm(rtc, &alarm);
+		if (err < 0)
+			return err;
+
+		if (copy_to_user(uarg, &alarm.time, sizeof(tm)))
+			err = -EFAULT;
+		return err;
+
+	case RTC_ALM_SET:
+		mutex_unlock(&rtc->ops_lock);
+
+		if (copy_from_user(&alarm.time, uarg, sizeof(tm)))
+			return -EFAULT;
+
+		alarm.enabled = 0;
+		alarm.pending = 0;
+		alarm.time.tm_wday = -1;
+		alarm.time.tm_yday = -1;
+		alarm.time.tm_isdst = -1;
+
+		/* RTC_ALM_SET alarms may be up to 24 hours in the future.
+		 * Rather than expecting every RTC to implement "don't care"
+		 * for day/month/year fields, just force the alarm to have
+		 * the right values for those fields.
+		 *
+		 * RTC_WKALM_SET should be used instead.  Not only does it
+		 * eliminate the need for a separate RTC_AIE_ON call, it
+		 * doesn't have the "alarm 23:59:59 in the future" race.
+		 *
+		 * NOTE:  some legacy code may have used invalid fields as
+		 * wildcards, exposing hardware "periodic alarm" capabilities.
+		 * Not supported here.
+		 */
+		{
+			time64_t now, then;
+
+			err = rtc_read_time(rtc, &tm);
+			if (err < 0)
+				return err;
+			now = rtc_tm_to_time64(&tm);
+
+			alarm.time.tm_mday = tm.tm_mday;
+			alarm.time.tm_mon = tm.tm_mon;
+			alarm.time.tm_year = tm.tm_year;
+			err  = rtc_valid_tm(&alarm.time);
+			if (err < 0)
+				return err;
+			then = rtc_tm_to_time64(&alarm.time);
+
+			/* alarm may need to wrap into tomorrow */
+			if (then < now) {
+				rtc_time64_to_tm(now + 24 * 60 * 60, &tm);
+				alarm.time.tm_mday = tm.tm_mday;
+				alarm.time.tm_mon = tm.tm_mon;
+				alarm.time.tm_year = tm.tm_year;
+			}
+		}
+
+		return rtc_set_alarm(rtc, &alarm);
+
+	case RTC_RD_TIME:
+		mutex_unlock(&rtc->ops_lock);
+
+		err = rtc_read_time(rtc, &tm);
+		if (err < 0)
+			return err;
+
+		if (copy_to_user(uarg, &tm, sizeof(tm)))
+			err = -EFAULT;
+		return err;
+
+	case RTC_SET_TIME:
+		mutex_unlock(&rtc->ops_lock);
+
+		if (copy_from_user(&tm, uarg, sizeof(tm)))
+			return -EFAULT;
+
+		return rtc_set_time(rtc, &tm);
+
+	case RTC_PIE_ON:
+		err = rtc_irq_set_state(rtc, NULL, 1);
+		break;
+
+	case RTC_PIE_OFF:
+		err = rtc_irq_set_state(rtc, NULL, 0);
+		break;
+
+	case RTC_AIE_ON:
+		mutex_unlock(&rtc->ops_lock);
+		return rtc_alarm_irq_enable(rtc, 1);
+
+	case RTC_AIE_OFF:
+		mutex_unlock(&rtc->ops_lock);
+		return rtc_alarm_irq_enable(rtc, 0);
+
+	case RTC_UIE_ON:
+		mutex_unlock(&rtc->ops_lock);
+		return rtc_update_irq_enable(rtc, 1);
+
+	case RTC_UIE_OFF:
+		mutex_unlock(&rtc->ops_lock);
+		return rtc_update_irq_enable(rtc, 0);
+
+	case RTC_IRQP_SET:
+		err = rtc_irq_set_freq(rtc, NULL, arg);
+		break;
+
+	case RTC_IRQP_READ:
+		err = put_user(rtc->irq_freq, (unsigned long __user *)uarg);
+		break;
+
+	case RTC_WKALM_SET:
+		mutex_unlock(&rtc->ops_lock);
+		if (copy_from_user(&alarm, uarg, sizeof(alarm)))
+			return -EFAULT;
+
+		return rtc_set_alarm(rtc, &alarm);
+
+	case RTC_WKALM_RD:
+		mutex_unlock(&rtc->ops_lock);
+		err = rtc_read_alarm(rtc, &alarm);
+		if (err < 0)
+			return err;
+
+		if (copy_to_user(uarg, &alarm, sizeof(alarm)))
+			err = -EFAULT;
+		return err;
+
+	default:
+		/* Finally try the driver's ioctl interface */
+		if (ops->ioctl) {
+			err = ops->ioctl(rtc->dev.parent, cmd, arg);
+			if (err == -ENOIOCTLCMD)
+				err = -ENOTTY;
+		} else
+			err = -ENOTTY;
+		break;
+	}
+
+done:
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+
+static int rtc_dev_fasync(int fd, struct file *file, int on)
+{
+	struct rtc_device *rtc = file->private_data;
+	return fasync_helper(fd, file, on, &rtc->async_queue);
+}
+
+static int rtc_dev_release(struct inode *inode, struct file *file)
+{
+	struct rtc_device *rtc = file->private_data;
+
+	/* We shut down the repeating IRQs that userspace enabled,
+	 * since nothing is listening to them.
+	 *  - Update (UIE) ... currently only managed through ioctls
+	 *  - Periodic (PIE) ... also used through rtc_*() interface calls
+	 *
+	 * Leave the alarm alone; it may be set to trigger a system wakeup
+	 * later, or be used by kernel code, and is a one-shot event anyway.
+	 */
+
+	/* Keep ioctl until all drivers are converted */
+	rtc_dev_ioctl(file, RTC_UIE_OFF, 0);
+	rtc_update_irq_enable(rtc, 0);
+	rtc_irq_set_state(rtc, NULL, 0);
+
+	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
+	return 0;
+}
+
+static const struct file_operations rtc_dev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= rtc_dev_read,
+	.poll		= rtc_dev_poll,
+	.unlocked_ioctl	= rtc_dev_ioctl,
+	.open		= rtc_dev_open,
+	.release	= rtc_dev_release,
+	.fasync		= rtc_dev_fasync,
+};
+
+/* insertion/removal hooks */
+
+void rtc_dev_prepare(struct rtc_device *rtc)
+{
+	if (!rtc_devt)
+		return;
+
+	if (rtc->id >= RTC_DEV_MAX) {
+		dev_dbg(&rtc->dev, "too many RTC devices\n");
+		return;
+	}
+
+	rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id);
+
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	INIT_WORK(&rtc->uie_task, rtc_uie_task);
+	setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc);
+#endif
+
+	cdev_init(&rtc->char_dev, &rtc_dev_fops);
+	rtc->char_dev.owner = rtc->owner;
+}
+
+void __init rtc_dev_init(void)
+{
+	int err;
+
+	err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc");
+	if (err < 0)
+		pr_err("failed to allocate char dev region\n");
+}
+
+void __exit rtc_dev_exit(void)
+{
+	if (rtc_devt)
+		unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
+}
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-digicolor.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-digicolor.c
new file mode 100644
index 0000000..b253bf1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-digicolor.c
@@ -0,0 +1,227 @@
+/*
+ * Real Time Clock driver for Conexant Digicolor
+ *
+ * Copyright (C) 2015 Paradox Innovation Ltd.
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+
+#define DC_RTC_CONTROL		0x0
+#define DC_RTC_TIME		0x8
+#define DC_RTC_REFERENCE	0xc
+#define DC_RTC_ALARM		0x10
+#define DC_RTC_INTFLAG_CLEAR	0x14
+#define DC_RTC_INTENABLE	0x16
+
+#define DC_RTC_CMD_MASK		0xf
+#define DC_RTC_GO_BUSY		BIT(7)
+
+#define CMD_NOP			0
+#define CMD_RESET		1
+#define CMD_WRITE		3
+#define CMD_READ		4
+
+#define CMD_DELAY_US		(10*1000)
+#define CMD_TIMEOUT_US		(500*CMD_DELAY_US)
+
+struct dc_rtc {
+	struct rtc_device	*rtc_dev;
+	void __iomem		*regs;
+};
+
+static int dc_rtc_cmds(struct dc_rtc *rtc, const u8 *cmds, int len)
+{
+	u8 val;
+	int i, ret;
+
+	for (i = 0; i < len; i++) {
+		writeb_relaxed((cmds[i] & DC_RTC_CMD_MASK) | DC_RTC_GO_BUSY,
+			       rtc->regs + DC_RTC_CONTROL);
+		ret = readb_relaxed_poll_timeout(
+			rtc->regs + DC_RTC_CONTROL, val,
+			!(val & DC_RTC_GO_BUSY), CMD_DELAY_US, CMD_TIMEOUT_US);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int dc_rtc_read(struct dc_rtc *rtc, unsigned long *val)
+{
+	static const u8 read_cmds[] = {CMD_READ, CMD_NOP};
+	u32 reference, time1, time2;
+	int ret;
+
+	ret = dc_rtc_cmds(rtc, read_cmds, ARRAY_SIZE(read_cmds));
+	if (ret < 0)
+		return ret;
+
+	reference = readl_relaxed(rtc->regs + DC_RTC_REFERENCE);
+	time1 = readl_relaxed(rtc->regs + DC_RTC_TIME);
+	/* Read twice to ensure consistency */
+	while (1) {
+		time2 = readl_relaxed(rtc->regs + DC_RTC_TIME);
+		if (time1 == time2)
+			break;
+		time1 = time2;
+	}
+
+	*val = reference + time1;
+	return 0;
+}
+
+static int dc_rtc_write(struct dc_rtc *rtc, u32 val)
+{
+	static const u8 write_cmds[] = {CMD_WRITE, CMD_NOP, CMD_RESET, CMD_NOP};
+
+	writel_relaxed(val, rtc->regs + DC_RTC_REFERENCE);
+	return dc_rtc_cmds(rtc, write_cmds, ARRAY_SIZE(write_cmds));
+}
+
+static int dc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct dc_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long now;
+	int ret;
+
+	ret = dc_rtc_read(rtc, &now);
+	if (ret < 0)
+		return ret;
+	rtc_time64_to_tm(now, tm);
+
+	return 0;
+}
+
+static int dc_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct dc_rtc *rtc = dev_get_drvdata(dev);
+
+	return dc_rtc_write(rtc, secs);
+}
+
+static int dc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct dc_rtc *rtc = dev_get_drvdata(dev);
+	u32 alarm_reg, reference;
+	unsigned long now;
+	int ret;
+
+	alarm_reg = readl_relaxed(rtc->regs + DC_RTC_ALARM);
+	reference = readl_relaxed(rtc->regs + DC_RTC_REFERENCE);
+	rtc_time64_to_tm(reference + alarm_reg, &alarm->time);
+
+	ret = dc_rtc_read(rtc, &now);
+	if (ret < 0)
+		return ret;
+
+	alarm->pending = alarm_reg + reference > now;
+	alarm->enabled = readl_relaxed(rtc->regs + DC_RTC_INTENABLE);
+
+	return 0;
+}
+
+static int dc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct dc_rtc *rtc = dev_get_drvdata(dev);
+	time64_t alarm_time;
+	u32 reference;
+
+	alarm_time = rtc_tm_to_time64(&alarm->time);
+
+	reference = readl_relaxed(rtc->regs + DC_RTC_REFERENCE);
+	writel_relaxed(alarm_time - reference, rtc->regs + DC_RTC_ALARM);
+
+	writeb_relaxed(!!alarm->enabled, rtc->regs + DC_RTC_INTENABLE);
+
+	return 0;
+}
+
+static int dc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct dc_rtc *rtc = dev_get_drvdata(dev);
+
+	writeb_relaxed(!!enabled, rtc->regs + DC_RTC_INTENABLE);
+
+	return 0;
+}
+
+static const struct rtc_class_ops dc_rtc_ops = {
+	.read_time		= dc_rtc_read_time,
+	.set_mmss		= dc_rtc_set_mmss,
+	.read_alarm		= dc_rtc_read_alarm,
+	.set_alarm		= dc_rtc_set_alarm,
+	.alarm_irq_enable	= dc_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t dc_rtc_irq(int irq, void *dev_id)
+{
+	struct dc_rtc *rtc = dev_id;
+
+	writeb_relaxed(1, rtc->regs + DC_RTC_INTFLAG_CLEAR);
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+
+	return IRQ_HANDLED;
+}
+
+static int __init dc_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct dc_rtc *rtc;
+	int irq, ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->regs))
+		return PTR_ERR(rtc->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	ret = devm_request_irq(&pdev->dev, irq, dc_rtc_irq, 0, pdev->name, rtc);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, rtc);
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+						&dc_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	return 0;
+}
+
+static const struct of_device_id dc_dt_ids[] = {
+	{ .compatible = "cnxt,cx92755-rtc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dc_dt_ids);
+
+static struct platform_driver dc_rtc_driver = {
+	.driver = {
+		.name = "digicolor_rtc",
+		.of_match_table = of_match_ptr(dc_dt_ids),
+	},
+};
+module_platform_driver_probe(dc_rtc_driver, dc_rtc_probe);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Conexant Digicolor Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-dm355evm.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-dm355evm.c
new file mode 100644
index 0000000..97d8259
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-dm355evm.c
@@ -0,0 +1,155 @@
+/*
+ * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/dm355evm_msp.h>
+#include <linux/module.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+ * a 1 Hz counter.  When a backup battery is supplied, that makes a
+ * reasonable RTC for applications where alarms and non-NTP drift
+ * compensation aren't important.
+ *
+ * The only real glitch is the inability to read or write all four
+ * counter bytes atomically:  the count may increment in the middle
+ * of an operation, causing trouble when the LSB rolls over.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+union evm_time {
+	u8	bytes[4];
+	u32	value;
+};
+
+static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	union evm_time	time;
+	int		status;
+	int		tries = 0;
+
+	do {
+		/*
+		 * Read LSB(0) to MSB(3) bytes.  Defend against the counter
+		 * rolling over by re-reading until the value is stable,
+		 * and assuming the four reads take at most a few seconds.
+		 */
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[0] == status)
+			break;
+		time.bytes[0] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[1] == status)
+			break;
+		time.bytes[1] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[2] == status)
+			break;
+		time.bytes[2] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[3] == status)
+			break;
+		time.bytes[3] = status;
+
+	} while (++tries < 5);
+
+	dev_dbg(dev, "read timestamp %08x\n", time.value);
+
+	rtc_time_to_tm(le32_to_cpu(time.value), tm);
+	return 0;
+}
+
+static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	union evm_time	time;
+	unsigned long	value;
+	int		status;
+
+	rtc_tm_to_time(tm, &value);
+	time.value = cpu_to_le32(value);
+
+	dev_dbg(dev, "write timestamp %08x\n", time.value);
+
+	/*
+	 * REVISIT handle non-atomic writes ... maybe just retry until
+	 * byte[1] sticks (no rollover)?
+	 */
+	status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static const struct rtc_class_ops dm355evm_rtc_ops = {
+	.read_time	= dm355evm_rtc_read_time,
+	.set_time	= dm355evm_rtc_set_time,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int dm355evm_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+
+	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&dm355evm_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+			PTR_ERR(rtc));
+		return PTR_ERR(rtc);
+	}
+	platform_set_drvdata(pdev, rtc);
+
+	return 0;
+}
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver rtc_dm355evm_driver = {
+	.probe		= dm355evm_rtc_probe,
+	.driver		= {
+		.name	= "rtc-dm355evm",
+	},
+};
+
+module_platform_driver(rtc_dm355evm_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1216.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1216.c
new file mode 100644
index 0000000..9c82b1d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1216.c
@@ -0,0 +1,177 @@
+/*
+ * Dallas DS1216 RTC driver
+ *
+ * Copyright (c) 2007 Thomas Bogendoerfer
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+struct ds1216_regs {
+	u8 tsec;
+	u8 sec;
+	u8 min;
+	u8 hour;
+	u8 wday;
+	u8 mday;
+	u8 month;
+	u8 year;
+};
+
+#define DS1216_HOUR_1224	(1 << 7)
+#define DS1216_HOUR_AMPM	(1 << 5)
+
+struct ds1216_priv {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+};
+
+static const u8 magic[] = {
+	0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
+};
+
+/*
+ * Read the 64 bit we'd like to have - It a series
+ * of 64 bits showing up in the LSB of the base register.
+ *
+ */
+static void ds1216_read(u8 __iomem *ioaddr, u8 *buf)
+{
+	unsigned char c;
+	int i, j;
+
+	for (i = 0; i < 8; i++) {
+		c = 0;
+		for (j = 0; j < 8; j++)
+			c |= (readb(ioaddr) & 0x1) << j;
+		buf[i] = c;
+	}
+}
+
+static void ds1216_write(u8 __iomem *ioaddr, const u8 *buf)
+{
+	unsigned char c;
+	int i, j;
+
+	for (i = 0; i < 8; i++) {
+		c = buf[i];
+		for (j = 0; j < 8; j++) {
+			writeb(c, ioaddr);
+			c = c >> 1;
+		}
+	}
+}
+
+static void ds1216_switch_ds_to_clock(u8 __iomem *ioaddr)
+{
+	/* Reset magic pointer */
+	readb(ioaddr);
+	/* Write 64 bit magic to DS1216 */
+	ds1216_write(ioaddr, magic);
+}
+
+static int ds1216_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1216_priv *priv = platform_get_drvdata(pdev);
+	struct ds1216_regs regs;
+
+	ds1216_switch_ds_to_clock(priv->ioaddr);
+	ds1216_read(priv->ioaddr, (u8 *)&regs);
+
+	tm->tm_sec = bcd2bin(regs.sec);
+	tm->tm_min = bcd2bin(regs.min);
+	if (regs.hour & DS1216_HOUR_1224) {
+		/* AM/PM mode */
+		tm->tm_hour = bcd2bin(regs.hour & 0x1f);
+		if (regs.hour & DS1216_HOUR_AMPM)
+			tm->tm_hour += 12;
+	} else
+		tm->tm_hour = bcd2bin(regs.hour & 0x3f);
+	tm->tm_wday = (regs.wday & 7) - 1;
+	tm->tm_mday = bcd2bin(regs.mday & 0x3f);
+	tm->tm_mon = bcd2bin(regs.month & 0x1f);
+	tm->tm_year = bcd2bin(regs.year);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;
+
+	return rtc_valid_tm(tm);
+}
+
+static int ds1216_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1216_priv *priv = platform_get_drvdata(pdev);
+	struct ds1216_regs regs;
+
+	ds1216_switch_ds_to_clock(priv->ioaddr);
+	ds1216_read(priv->ioaddr, (u8 *)&regs);
+
+	regs.tsec = 0; /* clear 0.1 and 0.01 seconds */
+	regs.sec = bin2bcd(tm->tm_sec);
+	regs.min = bin2bcd(tm->tm_min);
+	regs.hour &= DS1216_HOUR_1224;
+	if (regs.hour && tm->tm_hour > 12) {
+		regs.hour |= DS1216_HOUR_AMPM;
+		tm->tm_hour -= 12;
+	}
+	regs.hour |= bin2bcd(tm->tm_hour);
+	regs.wday &= ~7;
+	regs.wday |= tm->tm_wday;
+	regs.mday = bin2bcd(tm->tm_mday);
+	regs.month = bin2bcd(tm->tm_mon);
+	regs.year = bin2bcd(tm->tm_year % 100);
+
+	ds1216_switch_ds_to_clock(priv->ioaddr);
+	ds1216_write(priv->ioaddr, (u8 *)&regs);
+	return 0;
+}
+
+static const struct rtc_class_ops ds1216_rtc_ops = {
+	.read_time	= ds1216_rtc_read_time,
+	.set_time	= ds1216_rtc_set_time,
+};
+
+static int __init ds1216_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ds1216_priv *priv;
+	u8 dummy[8];
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->ioaddr))
+		return PTR_ERR(priv->ioaddr);
+
+	priv->rtc = devm_rtc_device_register(&pdev->dev, "ds1216",
+					&ds1216_rtc_ops, THIS_MODULE);
+	if (IS_ERR(priv->rtc))
+		return PTR_ERR(priv->rtc);
+
+	/* dummy read to get clock into a known state */
+	ds1216_read(priv->ioaddr, dummy);
+	return 0;
+}
+
+static struct platform_driver ds1216_rtc_platform_driver = {
+	.driver		= {
+		.name	= "rtc-ds1216",
+	},
+};
+
+module_platform_driver_probe(ds1216_rtc_platform_driver, ds1216_rtc_probe);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
+MODULE_DESCRIPTION("DS1216 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-ds1216");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1286.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1286.c
new file mode 100644
index 0000000..ef75c34
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1286.c
@@ -0,0 +1,364 @@
+/*
+ * DS1286 Real Time Clock interface for Linux
+ *
+ * Copyright (C) 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2008 Thomas Bogendoerfer
+ *
+ * Based on code written by Paul Gortmaker.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/bcd.h>
+#include <linux/rtc/ds1286.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+struct ds1286_priv {
+	struct rtc_device *rtc;
+	u32 __iomem *rtcregs;
+	spinlock_t lock;
+};
+
+static inline u8 ds1286_rtc_read(struct ds1286_priv *priv, int reg)
+{
+	return __raw_readl(&priv->rtcregs[reg]) & 0xff;
+}
+
+static inline void ds1286_rtc_write(struct ds1286_priv *priv, u8 data, int reg)
+{
+	__raw_writel(data, &priv->rtcregs[reg]);
+}
+
+
+static int ds1286_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned char val;
+
+	/* Allow or mask alarm interrupts */
+	spin_lock_irqsave(&priv->lock, flags);
+	val = ds1286_rtc_read(priv, RTC_CMD);
+	if (enabled)
+		val &=  ~RTC_TDM;
+	else
+		val |=  RTC_TDM;
+	ds1286_rtc_write(priv, val, RTC_CMD);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+static int ds1286_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned char val;
+
+	switch (cmd) {
+	case RTC_WIE_OFF:
+		/* Mask watchdog int. enab. bit	*/
+		spin_lock_irqsave(&priv->lock, flags);
+		val = ds1286_rtc_read(priv, RTC_CMD);
+		val |= RTC_WAM;
+		ds1286_rtc_write(priv, val, RTC_CMD);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		break;
+	case RTC_WIE_ON:
+		/* Allow watchdog interrupts.	*/
+		spin_lock_irqsave(&priv->lock, flags);
+		val = ds1286_rtc_read(priv, RTC_CMD);
+		val &= ~RTC_WAM;
+		ds1286_rtc_write(priv, val, RTC_CMD);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+#else
+#define ds1286_ioctl    NULL
+#endif
+
+#ifdef CONFIG_PROC_FS
+
+static int ds1286_proc(struct device *dev, struct seq_file *seq)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned char month, cmd, amode;
+	const char *s;
+
+	month = ds1286_rtc_read(priv, RTC_MONTH);
+	seq_printf(seq,
+		   "oscillator\t: %s\n"
+		   "square_wave\t: %s\n",
+		   (month & RTC_EOSC) ? "disabled" : "enabled",
+		   (month & RTC_ESQW) ? "disabled" : "enabled");
+
+	amode = ((ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x80) >> 5) |
+		((ds1286_rtc_read(priv, RTC_HOURS_ALARM) & 0x80) >> 6) |
+		((ds1286_rtc_read(priv, RTC_DAY_ALARM) & 0x80) >> 7);
+	switch (amode) {
+	case 7:
+		s = "each minute";
+		break;
+	case 3:
+		s = "minutes match";
+		break;
+	case 1:
+		s = "hours and minutes match";
+		break;
+	case 0:
+		s = "days, hours and minutes match";
+		break;
+	default:
+		s = "invalid";
+		break;
+	}
+	seq_printf(seq, "alarm_mode\t: %s\n", s);
+
+	cmd = ds1286_rtc_read(priv, RTC_CMD);
+	seq_printf(seq,
+		   "alarm_enable\t: %s\n"
+		   "wdog_alarm\t: %s\n"
+		   "alarm_mask\t: %s\n"
+		   "wdog_alarm_mask\t: %s\n"
+		   "interrupt_mode\t: %s\n"
+		   "INTB_mode\t: %s_active\n"
+		   "interrupt_pins\t: %s\n",
+		   (cmd & RTC_TDF) ? "yes" : "no",
+		   (cmd & RTC_WAF) ? "yes" : "no",
+		   (cmd & RTC_TDM) ? "disabled" : "enabled",
+		   (cmd & RTC_WAM) ? "disabled" : "enabled",
+		   (cmd & RTC_PU_LVL) ? "pulse" : "level",
+		   (cmd & RTC_IBH_LO) ? "low" : "high",
+		   (cmd & RTC_IPSW) ? "unswapped" : "swapped");
+	return 0;
+}
+
+#else
+#define ds1286_proc     NULL
+#endif
+
+static int ds1286_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned char save_control;
+	unsigned long flags;
+	unsigned long uip_watchdog = jiffies;
+
+	/*
+	 * read RTC once any update in progress is done. The update
+	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+	 * If you need to know *exactly* when a second has started, enable
+	 * periodic update complete interrupts, (via ioctl) and then
+	 * immediately read /dev/rtc which will block until you get the IRQ.
+	 * Once the read clears, read the RTC time (again via ioctl). Easy.
+	 */
+
+	if (ds1286_rtc_read(priv, RTC_CMD) & RTC_TE)
+		while (time_before(jiffies, uip_watchdog + 2*HZ/100))
+			barrier();
+
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	save_control = ds1286_rtc_read(priv, RTC_CMD);
+	ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
+
+	tm->tm_sec = ds1286_rtc_read(priv, RTC_SECONDS);
+	tm->tm_min = ds1286_rtc_read(priv, RTC_MINUTES);
+	tm->tm_hour = ds1286_rtc_read(priv, RTC_HOURS) & 0x3f;
+	tm->tm_mday = ds1286_rtc_read(priv, RTC_DATE);
+	tm->tm_mon = ds1286_rtc_read(priv, RTC_MONTH) & 0x1f;
+	tm->tm_year = ds1286_rtc_read(priv, RTC_YEAR);
+
+	ds1286_rtc_write(priv, save_control, RTC_CMD);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
+	tm->tm_year = bcd2bin(tm->tm_year);
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	if (tm->tm_year < 45)
+		tm->tm_year += 30;
+	tm->tm_year += 40;
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;
+
+	tm->tm_mon--;
+
+	return rtc_valid_tm(tm);
+}
+
+static int ds1286_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned char mon, day, hrs, min, sec;
+	unsigned char save_control;
+	unsigned int yrs;
+	unsigned long flags;
+
+	yrs = tm->tm_year + 1900;
+	mon = tm->tm_mon + 1;   /* tm_mon starts at zero */
+	day = tm->tm_mday;
+	hrs = tm->tm_hour;
+	min = tm->tm_min;
+	sec = tm->tm_sec;
+
+	if (yrs < 1970)
+		return -EINVAL;
+
+	yrs -= 1940;
+	if (yrs > 255)    /* They are unsigned */
+		return -EINVAL;
+
+	if (yrs >= 100)
+		yrs -= 100;
+
+	sec = bin2bcd(sec);
+	min = bin2bcd(min);
+	hrs = bin2bcd(hrs);
+	day = bin2bcd(day);
+	mon = bin2bcd(mon);
+	yrs = bin2bcd(yrs);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	save_control = ds1286_rtc_read(priv, RTC_CMD);
+	ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
+
+	ds1286_rtc_write(priv, yrs, RTC_YEAR);
+	ds1286_rtc_write(priv, mon, RTC_MONTH);
+	ds1286_rtc_write(priv, day, RTC_DATE);
+	ds1286_rtc_write(priv, hrs, RTC_HOURS);
+	ds1286_rtc_write(priv, min, RTC_MINUTES);
+	ds1286_rtc_write(priv, sec, RTC_SECONDS);
+	ds1286_rtc_write(priv, 0, RTC_HUNDREDTH_SECOND);
+
+	ds1286_rtc_write(priv, save_control, RTC_CMD);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 0;
+}
+
+static int ds1286_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	/*
+	 * Only the values that we read from the RTC are set. That
+	 * means only tm_wday, tm_hour, tm_min.
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	alm->time.tm_min = ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x7f;
+	alm->time.tm_hour = ds1286_rtc_read(priv, RTC_HOURS_ALARM)  & 0x1f;
+	alm->time.tm_wday = ds1286_rtc_read(priv, RTC_DAY_ALARM)    & 0x07;
+	ds1286_rtc_read(priv, RTC_CMD);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	alm->time.tm_min = bcd2bin(alm->time.tm_min);
+	alm->time.tm_hour = bcd2bin(alm->time.tm_hour);
+	alm->time.tm_sec = 0;
+	return 0;
+}
+
+static int ds1286_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1286_priv *priv = dev_get_drvdata(dev);
+	unsigned char hrs, min, sec;
+
+	hrs = alm->time.tm_hour;
+	min = alm->time.tm_min;
+	sec = alm->time.tm_sec;
+
+	if (hrs >= 24)
+		hrs = 0xff;
+
+	if (min >= 60)
+		min = 0xff;
+
+	if (sec != 0)
+		return -EINVAL;
+
+	min = bin2bcd(min);
+	hrs = bin2bcd(hrs);
+
+	spin_lock(&priv->lock);
+	ds1286_rtc_write(priv, hrs, RTC_HOURS_ALARM);
+	ds1286_rtc_write(priv, min, RTC_MINUTES_ALARM);
+	spin_unlock(&priv->lock);
+
+	return 0;
+}
+
+static const struct rtc_class_ops ds1286_ops = {
+	.ioctl		= ds1286_ioctl,
+	.proc		= ds1286_proc,
+	.read_time	= ds1286_read_time,
+	.set_time	= ds1286_set_time,
+	.read_alarm	= ds1286_read_alarm,
+	.set_alarm	= ds1286_set_alarm,
+	.alarm_irq_enable = ds1286_alarm_irq_enable,
+};
+
+static int ds1286_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct resource *res;
+	struct ds1286_priv *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct ds1286_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->rtcregs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->rtcregs))
+		return PTR_ERR(priv->rtcregs);
+
+	spin_lock_init(&priv->lock);
+	platform_set_drvdata(pdev, priv);
+	rtc = devm_rtc_device_register(&pdev->dev, "ds1286", &ds1286_ops,
+					THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+	priv->rtc = rtc;
+	return 0;
+}
+
+static struct platform_driver ds1286_platform_driver = {
+	.driver		= {
+		.name	= "rtc-ds1286",
+	},
+	.probe		= ds1286_probe,
+};
+
+module_platform_driver(ds1286_platform_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
+MODULE_DESCRIPTION("DS1286 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-ds1286");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1302.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1302.c
new file mode 100644
index 0000000..0ec4be6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1302.c
@@ -0,0 +1,219 @@
+/*
+ * Dallas DS1302 RTC Support
+ *
+ *  Copyright (C) 2002 David McCullough
+ *  Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License version 2. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+
+#define DRV_NAME	"rtc-ds1302"
+
+#define	RTC_CMD_READ	0x81		/* Read command */
+#define	RTC_CMD_WRITE	0x80		/* Write command */
+
+#define	RTC_CMD_WRITE_ENABLE	0x00		/* Write enable */
+#define	RTC_CMD_WRITE_DISABLE	0x80		/* Write disable */
+
+#define RTC_ADDR_RAM0	0x20		/* Address of RAM0 */
+#define RTC_ADDR_TCR	0x08		/* Address of trickle charge register */
+#define RTC_CLCK_BURST	0x1F		/* Address of clock burst */
+#define	RTC_CLCK_LEN	0x08		/* Size of clock burst */
+#define	RTC_ADDR_CTRL	0x07		/* Address of control register */
+#define	RTC_ADDR_YEAR	0x06		/* Address of year register */
+#define	RTC_ADDR_DAY	0x05		/* Address of day of week register */
+#define	RTC_ADDR_MON	0x04		/* Address of month register */
+#define	RTC_ADDR_DATE	0x03		/* Address of day of month register */
+#define	RTC_ADDR_HOUR	0x02		/* Address of hour register */
+#define	RTC_ADDR_MIN	0x01		/* Address of minute register */
+#define	RTC_ADDR_SEC	0x00		/* Address of second register */
+
+static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct spi_device	*spi = dev_get_drvdata(dev);
+	u8		buf[1 + RTC_CLCK_LEN];
+	u8		*bp = buf;
+	int		status;
+
+	/* Enable writing */
+	bp = buf;
+	*bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE;
+	*bp++ = RTC_CMD_WRITE_ENABLE;
+
+	status = spi_write_then_read(spi, buf, 2,
+			NULL, 0);
+	if (status)
+		return status;
+
+	/* Write registers starting at the first time/date address. */
+	bp = buf;
+	*bp++ = RTC_CLCK_BURST << 1 | RTC_CMD_WRITE;
+
+	*bp++ = bin2bcd(time->tm_sec);
+	*bp++ = bin2bcd(time->tm_min);
+	*bp++ = bin2bcd(time->tm_hour);
+	*bp++ = bin2bcd(time->tm_mday);
+	*bp++ = bin2bcd(time->tm_mon + 1);
+	*bp++ = time->tm_wday + 1;
+	*bp++ = bin2bcd(time->tm_year % 100);
+	*bp++ = RTC_CMD_WRITE_DISABLE;
+
+	/* use write-then-read since dma from stack is nonportable */
+	return spi_write_then_read(spi, buf, sizeof(buf),
+			NULL, 0);
+}
+
+static int ds1302_rtc_get_time(struct device *dev, struct rtc_time *time)
+{
+	struct spi_device	*spi = dev_get_drvdata(dev);
+	u8		addr = RTC_CLCK_BURST << 1 | RTC_CMD_READ;
+	u8		buf[RTC_CLCK_LEN - 1];
+	int		status;
+
+	/* Use write-then-read to get all the date/time registers
+	 * since dma from stack is nonportable
+	 */
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			buf, sizeof(buf));
+	if (status < 0)
+		return status;
+
+	/* Decode the registers */
+	time->tm_sec = bcd2bin(buf[RTC_ADDR_SEC]);
+	time->tm_min = bcd2bin(buf[RTC_ADDR_MIN]);
+	time->tm_hour = bcd2bin(buf[RTC_ADDR_HOUR]);
+	time->tm_wday = buf[RTC_ADDR_DAY] - 1;
+	time->tm_mday = bcd2bin(buf[RTC_ADDR_DATE]);
+	time->tm_mon = bcd2bin(buf[RTC_ADDR_MON]) - 1;
+	time->tm_year = bcd2bin(buf[RTC_ADDR_YEAR]) + 100;
+
+	/* Time may not be set */
+	return rtc_valid_tm(time);
+}
+
+static const struct rtc_class_ops ds1302_rtc_ops = {
+	.read_time	= ds1302_rtc_get_time,
+	.set_time	= ds1302_rtc_set_time,
+};
+
+static int ds1302_probe(struct spi_device *spi)
+{
+	struct rtc_device	*rtc;
+	u8		addr;
+	u8		buf[4];
+	u8		*bp = buf;
+	int		status;
+
+	/* Sanity check board setup data.  This may be hooked up
+	 * in 3wire mode, but we don't care.  Note that unless
+	 * there's an inverter in place, this needs SPI_CS_HIGH!
+	 */
+	if (spi->bits_per_word && (spi->bits_per_word != 8)) {
+		dev_err(&spi->dev, "bad word length\n");
+		return -EINVAL;
+	} else if (spi->max_speed_hz > 2000000) {
+		dev_err(&spi->dev, "speed is too high\n");
+		return -EINVAL;
+	} else if (spi->mode & SPI_CPHA) {
+		dev_err(&spi->dev, "bad mode\n");
+		return -EINVAL;
+	}
+
+	addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ;
+	status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1);
+	if (status < 0) {
+		dev_err(&spi->dev, "control register read error %d\n",
+				status);
+		return status;
+	}
+
+	if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) {
+		status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1);
+		if (status < 0) {
+			dev_err(&spi->dev, "control register read error %d\n",
+					status);
+			return status;
+		}
+
+		if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) {
+			dev_err(&spi->dev, "junk in control register\n");
+			return -ENODEV;
+		}
+	}
+	if (buf[0] == 0) {
+		bp = buf;
+		*bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE;
+		*bp++ = RTC_CMD_WRITE_DISABLE;
+
+		status = spi_write_then_read(spi, buf, 2, NULL, 0);
+		if (status < 0) {
+			dev_err(&spi->dev, "control register write error %d\n",
+					status);
+			return status;
+		}
+
+		addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ;
+		status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1);
+		if (status < 0) {
+			dev_err(&spi->dev,
+					"error %d reading control register\n",
+					status);
+			return status;
+		}
+
+		if (buf[0] != RTC_CMD_WRITE_DISABLE) {
+			dev_err(&spi->dev, "failed to detect chip\n");
+			return -ENODEV;
+		}
+	}
+
+	spi_set_drvdata(spi, spi);
+
+	rtc = devm_rtc_device_register(&spi->dev, "ds1302",
+			&ds1302_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		status = PTR_ERR(rtc);
+		dev_err(&spi->dev, "error %d registering rtc\n", status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int ds1302_remove(struct spi_device *spi)
+{
+	spi_set_drvdata(spi, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1302_dt_ids[] = {
+	{ .compatible = "maxim,ds1302", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ds1302_dt_ids);
+#endif
+
+static struct spi_driver ds1302_driver = {
+	.driver.name	= "rtc-ds1302",
+	.driver.of_match_table = of_match_ptr(ds1302_dt_ids),
+	.probe		= ds1302_probe,
+	.remove		= ds1302_remove,
+};
+
+module_spi_driver(ds1302_driver);
+
+MODULE_DESCRIPTION("Dallas DS1302 RTC driver");
+MODULE_AUTHOR("Paul Mundt, David McCullough");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1305.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1305.c
new file mode 100644
index 0000000..72b2293
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1305.c
@@ -0,0 +1,773 @@
+/*
+ * rtc-ds1305.c -- driver for DS1305 and DS1306 SPI RTC chips
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+#include <linux/module.h>
+
+
+/*
+ * Registers ... mask DS1305_WRITE into register address to write,
+ * otherwise you're reading it.  All non-bitmask values are BCD.
+ */
+#define DS1305_WRITE		0x80
+
+
+/* RTC date/time ... the main special cases are that we:
+ *  - Need fancy "hours" encoding in 12hour mode
+ *  - Don't rely on the "day-of-week" field (or tm_wday)
+ *  - Are a 21st-century clock (2000 <= year < 2100)
+ */
+#define DS1305_RTC_LEN		7		/* bytes for RTC regs */
+
+#define DS1305_SEC		0x00		/* register addresses */
+#define DS1305_MIN		0x01
+#define DS1305_HOUR		0x02
+#	define DS1305_HR_12		0x40	/* set == 12 hr mode */
+#	define DS1305_HR_PM		0x20	/* set == PM (12hr mode) */
+#define DS1305_WDAY		0x03
+#define DS1305_MDAY		0x04
+#define DS1305_MON		0x05
+#define DS1305_YEAR		0x06
+
+
+/* The two alarms have only sec/min/hour/wday fields (ALM_LEN).
+ * DS1305_ALM_DISABLE disables a match field (some combos are bad).
+ *
+ * NOTE that since we don't use WDAY, we limit ourselves to alarms
+ * only one day into the future (vs potentially up to a week).
+ *
+ * NOTE ALSO that while we could generate once-a-second IRQs (UIE), we
+ * don't currently support them.  We'd either need to do it only when
+ * no alarm is pending (not the standard model), or to use the second
+ * alarm (implying that this is a DS1305 not DS1306, *and* that either
+ * it's wired up a second IRQ we know, or that INTCN is set)
+ */
+#define DS1305_ALM_LEN		4		/* bytes for ALM regs */
+#define DS1305_ALM_DISABLE	0x80
+
+#define DS1305_ALM0(r)		(0x07 + (r))	/* register addresses */
+#define DS1305_ALM1(r)		(0x0b + (r))
+
+
+/* three control registers */
+#define DS1305_CONTROL_LEN	3		/* bytes of control regs */
+
+#define DS1305_CONTROL		0x0f		/* register addresses */
+#	define DS1305_nEOSC		0x80	/* low enables oscillator */
+#	define DS1305_WP		0x40	/* write protect */
+#	define DS1305_INTCN		0x04	/* clear == only int0 used */
+#	define DS1306_1HZ		0x04	/* enable 1Hz output */
+#	define DS1305_AEI1		0x02	/* enable ALM1 IRQ */
+#	define DS1305_AEI0		0x01	/* enable ALM0 IRQ */
+#define DS1305_STATUS		0x10
+/* status has just AEIx bits, mirrored as IRQFx */
+#define DS1305_TRICKLE		0x11
+/* trickle bits are defined in <linux/spi/ds1305.h> */
+
+/* a bunch of NVRAM */
+#define DS1305_NVRAM_LEN	96		/* bytes of NVRAM */
+
+#define DS1305_NVRAM		0x20		/* register addresses */
+
+
+struct ds1305 {
+	struct spi_device	*spi;
+	struct rtc_device	*rtc;
+
+	struct work_struct	work;
+
+	unsigned long		flags;
+#define FLAG_EXITING	0
+
+	bool			hr12;
+	u8			ctrl[DS1305_CONTROL_LEN];
+};
+
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Utilities ...  tolerate 12-hour AM/PM notation in case of non-Linux
+ * software (like a bootloader) which may require it.
+ */
+
+static unsigned bcd2hour(u8 bcd)
+{
+	if (bcd & DS1305_HR_12) {
+		unsigned	hour = 0;
+
+		bcd &= ~DS1305_HR_12;
+		if (bcd & DS1305_HR_PM) {
+			hour = 12;
+			bcd &= ~DS1305_HR_PM;
+		}
+		hour += bcd2bin(bcd);
+		return hour - 1;
+	}
+	return bcd2bin(bcd);
+}
+
+static u8 hour2bcd(bool hr12, int hour)
+{
+	if (hr12) {
+		hour++;
+		if (hour <= 12)
+			return DS1305_HR_12 | bin2bcd(hour);
+		hour -= 12;
+		return DS1305_HR_12 | DS1305_HR_PM | bin2bcd(hour);
+	}
+	return bin2bcd(hour);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to RTC framework
+ */
+
+static int ds1305_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		buf[2];
+	long		err = -EINVAL;
+
+	buf[0] = DS1305_WRITE | DS1305_CONTROL;
+	buf[1] = ds1305->ctrl[0];
+
+	if (enabled) {
+		if (ds1305->ctrl[0] & DS1305_AEI0)
+			goto done;
+		buf[1] |= DS1305_AEI0;
+	} else {
+		if (!(buf[1] & DS1305_AEI0))
+			goto done;
+		buf[1] &= ~DS1305_AEI0;
+	}
+	err = spi_write_then_read(ds1305->spi, buf, sizeof(buf), NULL, 0);
+	if (err >= 0)
+		ds1305->ctrl[0] = buf[1];
+done:
+	return err;
+
+}
+
+
+/*
+ * Get/set of date and time is pretty normal.
+ */
+
+static int ds1305_get_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		addr = DS1305_SEC;
+	u8		buf[DS1305_RTC_LEN];
+	int		status;
+
+	/* Use write-then-read to get all the date/time registers
+	 * since dma from stack is nonportable
+	 */
+	status = spi_write_then_read(ds1305->spi, &addr, sizeof(addr),
+			buf, sizeof(buf));
+	if (status < 0)
+		return status;
+
+	dev_vdbg(dev, "%s: %3ph, %4ph\n", "read", &buf[0], &buf[3]);
+
+	/* Decode the registers */
+	time->tm_sec = bcd2bin(buf[DS1305_SEC]);
+	time->tm_min = bcd2bin(buf[DS1305_MIN]);
+	time->tm_hour = bcd2hour(buf[DS1305_HOUR]);
+	time->tm_wday = buf[DS1305_WDAY] - 1;
+	time->tm_mday = bcd2bin(buf[DS1305_MDAY]);
+	time->tm_mon = bcd2bin(buf[DS1305_MON]) - 1;
+	time->tm_year = bcd2bin(buf[DS1305_YEAR]) + 100;
+
+	dev_vdbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", time->tm_sec, time->tm_min,
+		time->tm_hour, time->tm_mday,
+		time->tm_mon, time->tm_year, time->tm_wday);
+
+	/* Time may not be set */
+	return rtc_valid_tm(time);
+}
+
+static int ds1305_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		buf[1 + DS1305_RTC_LEN];
+	u8		*bp = buf;
+
+	dev_vdbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", time->tm_sec, time->tm_min,
+		time->tm_hour, time->tm_mday,
+		time->tm_mon, time->tm_year, time->tm_wday);
+
+	/* Write registers starting at the first time/date address. */
+	*bp++ = DS1305_WRITE | DS1305_SEC;
+
+	*bp++ = bin2bcd(time->tm_sec);
+	*bp++ = bin2bcd(time->tm_min);
+	*bp++ = hour2bcd(ds1305->hr12, time->tm_hour);
+	*bp++ = (time->tm_wday < 7) ? (time->tm_wday + 1) : 1;
+	*bp++ = bin2bcd(time->tm_mday);
+	*bp++ = bin2bcd(time->tm_mon + 1);
+	*bp++ = bin2bcd(time->tm_year - 100);
+
+	dev_dbg(dev, "%s: %3ph, %4ph\n", "write", &buf[1], &buf[4]);
+
+	/* use write-then-read since dma from stack is nonportable */
+	return spi_write_then_read(ds1305->spi, buf, sizeof(buf),
+			NULL, 0);
+}
+
+/*
+ * Get/set of alarm is a bit funky:
+ *
+ * - First there's the inherent raciness of getting the (partitioned)
+ *   status of an alarm that could trigger while we're reading parts
+ *   of that status.
+ *
+ * - Second there's its limited range (we could increase it a bit by
+ *   relying on WDAY), which means it will easily roll over.
+ *
+ * - Third there's the choice of two alarms and alarm signals.
+ *   Here we use ALM0 and expect that nINT0 (open drain) is used;
+ *   that's the only real option for DS1306 runtime alarms, and is
+ *   natural on DS1305.
+ *
+ * - Fourth, there's also ALM1, and a second interrupt signal:
+ *     + On DS1305 ALM1 uses nINT1 (when INTCN=1) else nINT0;
+ *     + On DS1306 ALM1 only uses INT1 (an active high pulse)
+ *       and it won't work when VCC1 is active.
+ *
+ *   So to be most general, we should probably set both alarms to the
+ *   same value, letting ALM1 be the wakeup event source on DS1306
+ *   and handling several wiring options on DS1305.
+ *
+ * - Fifth, we support the polled mode (as well as possible; why not?)
+ *   even when no interrupt line is wired to an IRQ.
+ */
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	struct spi_device *spi = ds1305->spi;
+	u8		addr;
+	int		status;
+	u8		buf[DS1305_ALM_LEN];
+
+	/* Refresh control register cache BEFORE reading ALM0 registers,
+	 * since reading alarm registers acks any pending IRQ.  That
+	 * makes returning "pending" status a bit of a lie, but that bit
+	 * of EFI status is at best fragile anyway (given IRQ handlers).
+	 */
+	addr = DS1305_CONTROL;
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			ds1305->ctrl, sizeof(ds1305->ctrl));
+	if (status < 0)
+		return status;
+
+	alm->enabled = !!(ds1305->ctrl[0] & DS1305_AEI0);
+	alm->pending = !!(ds1305->ctrl[1] & DS1305_AEI0);
+
+	/* get and check ALM0 registers */
+	addr = DS1305_ALM0(DS1305_SEC);
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			buf, sizeof(buf));
+	if (status < 0)
+		return status;
+
+	dev_vdbg(dev, "%s: %02x %02x %02x %02x\n",
+		"alm0 read", buf[DS1305_SEC], buf[DS1305_MIN],
+		buf[DS1305_HOUR], buf[DS1305_WDAY]);
+
+	if ((DS1305_ALM_DISABLE & buf[DS1305_SEC])
+			|| (DS1305_ALM_DISABLE & buf[DS1305_MIN])
+			|| (DS1305_ALM_DISABLE & buf[DS1305_HOUR]))
+		return -EIO;
+
+	/* Stuff these values into alm->time and let RTC framework code
+	 * fill in the rest ... and also handle rollover to tomorrow when
+	 * that's needed.
+	 */
+	alm->time.tm_sec = bcd2bin(buf[DS1305_SEC]);
+	alm->time.tm_min = bcd2bin(buf[DS1305_MIN]);
+	alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
+
+	return 0;
+}
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	struct spi_device *spi = ds1305->spi;
+	unsigned long	now, later;
+	struct rtc_time	tm;
+	int		status;
+	u8		buf[1 + DS1305_ALM_LEN];
+
+	/* convert desired alarm to time_t */
+	status = rtc_tm_to_time(&alm->time, &later);
+	if (status < 0)
+		return status;
+
+	/* Read current time as time_t */
+	status = ds1305_get_time(dev, &tm);
+	if (status < 0)
+		return status;
+	status = rtc_tm_to_time(&tm, &now);
+	if (status < 0)
+		return status;
+
+	/* make sure alarm fires within the next 24 hours */
+	if (later <= now)
+		return -EINVAL;
+	if ((later - now) > 24 * 60 * 60)
+		return -EDOM;
+
+	/* disable alarm if needed */
+	if (ds1305->ctrl[0] & DS1305_AEI0) {
+		ds1305->ctrl[0] &= ~DS1305_AEI0;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+		if (status < 0)
+			return status;
+	}
+
+	/* write alarm */
+	buf[0] = DS1305_WRITE | DS1305_ALM0(DS1305_SEC);
+	buf[1 + DS1305_SEC] = bin2bcd(alm->time.tm_sec);
+	buf[1 + DS1305_MIN] = bin2bcd(alm->time.tm_min);
+	buf[1 + DS1305_HOUR] = hour2bcd(ds1305->hr12, alm->time.tm_hour);
+	buf[1 + DS1305_WDAY] = DS1305_ALM_DISABLE;
+
+	dev_dbg(dev, "%s: %02x %02x %02x %02x\n",
+		"alm0 write", buf[1 + DS1305_SEC], buf[1 + DS1305_MIN],
+		buf[1 + DS1305_HOUR], buf[1 + DS1305_WDAY]);
+
+	status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
+	if (status < 0)
+		return status;
+
+	/* enable alarm if requested */
+	if (alm->enabled) {
+		ds1305->ctrl[0] |= DS1305_AEI0;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+	}
+
+	return status;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int ds1305_proc(struct device *dev, struct seq_file *seq)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	char		*diodes = "no";
+	char		*resistors = "";
+
+	/* ctrl[2] is treated as read-only; no locking needed */
+	if ((ds1305->ctrl[2] & 0xf0) == DS1305_TRICKLE_MAGIC) {
+		switch (ds1305->ctrl[2] & 0x0c) {
+		case DS1305_TRICKLE_DS2:
+			diodes = "2 diodes, ";
+			break;
+		case DS1305_TRICKLE_DS1:
+			diodes = "1 diode, ";
+			break;
+		default:
+			goto done;
+		}
+		switch (ds1305->ctrl[2] & 0x03) {
+		case DS1305_TRICKLE_2K:
+			resistors = "2k Ohm";
+			break;
+		case DS1305_TRICKLE_4K:
+			resistors = "4k Ohm";
+			break;
+		case DS1305_TRICKLE_8K:
+			resistors = "8k Ohm";
+			break;
+		default:
+			diodes = "no";
+			break;
+		}
+	}
+
+done:
+	seq_printf(seq, "trickle_charge\t: %s%s\n", diodes, resistors);
+
+	return 0;
+}
+
+#else
+#define ds1305_proc	NULL
+#endif
+
+static const struct rtc_class_ops ds1305_ops = {
+	.read_time	= ds1305_get_time,
+	.set_time	= ds1305_set_time,
+	.read_alarm	= ds1305_get_alarm,
+	.set_alarm	= ds1305_set_alarm,
+	.proc		= ds1305_proc,
+	.alarm_irq_enable = ds1305_alarm_irq_enable,
+};
+
+static void ds1305_work(struct work_struct *work)
+{
+	struct ds1305	*ds1305 = container_of(work, struct ds1305, work);
+	struct mutex	*lock = &ds1305->rtc->ops_lock;
+	struct spi_device *spi = ds1305->spi;
+	u8		buf[3];
+	int		status;
+
+	/* lock to protect ds1305->ctrl */
+	mutex_lock(lock);
+
+	/* Disable the IRQ, and clear its status ... for now, we "know"
+	 * that if more than one alarm is active, they're in sync.
+	 * Note that reading ALM data registers also clears IRQ status.
+	 */
+	ds1305->ctrl[0] &= ~(DS1305_AEI1 | DS1305_AEI0);
+	ds1305->ctrl[1] = 0;
+
+	buf[0] = DS1305_WRITE | DS1305_CONTROL;
+	buf[1] = ds1305->ctrl[0];
+	buf[2] = 0;
+
+	status = spi_write_then_read(spi, buf, sizeof(buf),
+			NULL, 0);
+	if (status < 0)
+		dev_dbg(&spi->dev, "clear irq --> %d\n", status);
+
+	mutex_unlock(lock);
+
+	if (!test_bit(FLAG_EXITING, &ds1305->flags))
+		enable_irq(spi->irq);
+
+	rtc_update_irq(ds1305->rtc, 1, RTC_AF | RTC_IRQF);
+}
+
+/*
+ * This "real" IRQ handler hands off to a workqueue mostly to allow
+ * mutex locking for ds1305->ctrl ... unlike I2C, we could issue async
+ * I/O requests in IRQ context (to clear the IRQ status).
+ */
+static irqreturn_t ds1305_irq(int irq, void *p)
+{
+	struct ds1305		*ds1305 = p;
+
+	disable_irq(irq);
+	schedule_work(&ds1305->work);
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface for NVRAM
+ */
+
+static void msg_init(struct spi_message *m, struct spi_transfer *x,
+		u8 *addr, size_t count, char *tx, char *rx)
+{
+	spi_message_init(m);
+	memset(x, 0, 2 * sizeof(*x));
+
+	x->tx_buf = addr;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+
+	x->tx_buf = tx;
+	x->rx_buf = rx;
+	x->len = count;
+	spi_message_add_tail(x, m);
+}
+
+static ssize_t
+ds1305_nvram_read(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct spi_device	*spi;
+	u8			addr;
+	struct spi_message	m;
+	struct spi_transfer	x[2];
+	int			status;
+
+	spi = to_spi_device(kobj_to_dev(kobj));
+
+	addr = DS1305_NVRAM + off;
+	msg_init(&m, x, &addr, count, NULL, buf);
+
+	status = spi_sync(spi, &m);
+	if (status < 0)
+		dev_err(&spi->dev, "nvram %s error %d\n", "read", status);
+	return (status < 0) ? status : count;
+}
+
+static ssize_t
+ds1305_nvram_write(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct spi_device	*spi;
+	u8			addr;
+	struct spi_message	m;
+	struct spi_transfer	x[2];
+	int			status;
+
+	spi = to_spi_device(kobj_to_dev(kobj));
+
+	addr = (DS1305_WRITE | DS1305_NVRAM) + off;
+	msg_init(&m, x, &addr, count, buf, NULL);
+
+	status = spi_sync(spi, &m);
+	if (status < 0)
+		dev_err(&spi->dev, "nvram %s error %d\n", "write", status);
+	return (status < 0) ? status : count;
+}
+
+static struct bin_attribute nvram = {
+	.attr.name	= "nvram",
+	.attr.mode	= S_IRUGO | S_IWUSR,
+	.read		= ds1305_nvram_read,
+	.write		= ds1305_nvram_write,
+	.size		= DS1305_NVRAM_LEN,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to SPI stack
+ */
+
+static int ds1305_probe(struct spi_device *spi)
+{
+	struct ds1305			*ds1305;
+	int				status;
+	u8				addr, value;
+	struct ds1305_platform_data	*pdata = dev_get_platdata(&spi->dev);
+	bool				write_ctrl = false;
+
+	/* Sanity check board setup data.  This may be hooked up
+	 * in 3wire mode, but we don't care.  Note that unless
+	 * there's an inverter in place, this needs SPI_CS_HIGH!
+	 */
+	if ((spi->bits_per_word && spi->bits_per_word != 8)
+			|| (spi->max_speed_hz > 2000000)
+			|| !(spi->mode & SPI_CPHA))
+		return -EINVAL;
+
+	/* set up driver data */
+	ds1305 = devm_kzalloc(&spi->dev, sizeof(*ds1305), GFP_KERNEL);
+	if (!ds1305)
+		return -ENOMEM;
+	ds1305->spi = spi;
+	spi_set_drvdata(spi, ds1305);
+
+	/* read and cache control registers */
+	addr = DS1305_CONTROL;
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			ds1305->ctrl, sizeof(ds1305->ctrl));
+	if (status < 0) {
+		dev_dbg(&spi->dev, "can't %s, %d\n",
+				"read", status);
+		return status;
+	}
+
+	dev_dbg(&spi->dev, "ctrl %s: %3ph\n", "read", ds1305->ctrl);
+
+	/* Sanity check register values ... partially compensating for the
+	 * fact that SPI has no device handshake.  A pullup on MISO would
+	 * make these tests fail; but not all systems will have one.  If
+	 * some register is neither 0x00 nor 0xff, a chip is likely there.
+	 */
+	if ((ds1305->ctrl[0] & 0x38) != 0 || (ds1305->ctrl[1] & 0xfc) != 0) {
+		dev_dbg(&spi->dev, "RTC chip is not present\n");
+		return -ENODEV;
+	}
+	if (ds1305->ctrl[2] == 0)
+		dev_dbg(&spi->dev, "chip may not be present\n");
+
+	/* enable writes if needed ... if we were paranoid it would
+	 * make sense to enable them only when absolutely necessary.
+	 */
+	if (ds1305->ctrl[0] & DS1305_WP) {
+		u8		buf[2];
+
+		ds1305->ctrl[0] &= ~DS1305_WP;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
+
+		dev_dbg(&spi->dev, "clear WP --> %d\n", status);
+		if (status < 0)
+			return status;
+	}
+
+	/* on DS1305, maybe start oscillator; like most low power
+	 * oscillators, it may take a second to stabilize
+	 */
+	if (ds1305->ctrl[0] & DS1305_nEOSC) {
+		ds1305->ctrl[0] &= ~DS1305_nEOSC;
+		write_ctrl = true;
+		dev_warn(&spi->dev, "SET TIME!\n");
+	}
+
+	/* ack any pending IRQs */
+	if (ds1305->ctrl[1]) {
+		ds1305->ctrl[1] = 0;
+		write_ctrl = true;
+	}
+
+	/* this may need one-time (re)init */
+	if (pdata) {
+		/* maybe enable trickle charge */
+		if (((ds1305->ctrl[2] & 0xf0) != DS1305_TRICKLE_MAGIC)) {
+			ds1305->ctrl[2] = DS1305_TRICKLE_MAGIC
+						| pdata->trickle;
+			write_ctrl = true;
+		}
+
+		/* on DS1306, configure 1 Hz signal */
+		if (pdata->is_ds1306) {
+			if (pdata->en_1hz) {
+				if (!(ds1305->ctrl[0] & DS1306_1HZ)) {
+					ds1305->ctrl[0] |= DS1306_1HZ;
+					write_ctrl = true;
+				}
+			} else {
+				if (ds1305->ctrl[0] & DS1306_1HZ) {
+					ds1305->ctrl[0] &= ~DS1306_1HZ;
+					write_ctrl = true;
+				}
+			}
+		}
+	}
+
+	if (write_ctrl) {
+		u8		buf[4];
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		buf[2] = ds1305->ctrl[1];
+		buf[3] = ds1305->ctrl[2];
+		status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
+		if (status < 0) {
+			dev_dbg(&spi->dev, "can't %s, %d\n",
+					"write", status);
+			return status;
+		}
+
+		dev_dbg(&spi->dev, "ctrl %s: %3ph\n", "write", ds1305->ctrl);
+	}
+
+	/* see if non-Linux software set up AM/PM mode */
+	addr = DS1305_HOUR;
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+				&value, sizeof(value));
+	if (status < 0) {
+		dev_dbg(&spi->dev, "read HOUR --> %d\n", status);
+		return status;
+	}
+
+	ds1305->hr12 = (DS1305_HR_12 & value) != 0;
+	if (ds1305->hr12)
+		dev_dbg(&spi->dev, "AM/PM\n");
+
+	/* register RTC ... from here on, ds1305->ctrl needs locking */
+	ds1305->rtc = devm_rtc_device_register(&spi->dev, "ds1305",
+			&ds1305_ops, THIS_MODULE);
+	if (IS_ERR(ds1305->rtc)) {
+		status = PTR_ERR(ds1305->rtc);
+		dev_dbg(&spi->dev, "register rtc --> %d\n", status);
+		return status;
+	}
+
+	/* Maybe set up alarm IRQ; be ready to handle it triggering right
+	 * away.  NOTE that we don't share this.  The signal is active low,
+	 * and we can't ack it before a SPI message delay.  We temporarily
+	 * disable the IRQ until it's acked, which lets us work with more
+	 * IRQ trigger modes (not all IRQ controllers can do falling edge).
+	 */
+	if (spi->irq) {
+		INIT_WORK(&ds1305->work, ds1305_work);
+		status = devm_request_irq(&spi->dev, spi->irq, ds1305_irq,
+				0, dev_name(&ds1305->rtc->dev), ds1305);
+		if (status < 0) {
+			dev_err(&spi->dev, "request_irq %d --> %d\n",
+					spi->irq, status);
+		} else {
+			device_set_wakeup_capable(&spi->dev, 1);
+		}
+	}
+
+	/* export NVRAM */
+	status = sysfs_create_bin_file(&spi->dev.kobj, &nvram);
+	if (status < 0) {
+		dev_err(&spi->dev, "register nvram --> %d\n", status);
+	}
+
+	return 0;
+}
+
+static int ds1305_remove(struct spi_device *spi)
+{
+	struct ds1305 *ds1305 = spi_get_drvdata(spi);
+
+	sysfs_remove_bin_file(&spi->dev.kobj, &nvram);
+
+	/* carefully shut down irq and workqueue, if present */
+	if (spi->irq) {
+		set_bit(FLAG_EXITING, &ds1305->flags);
+		devm_free_irq(&spi->dev, spi->irq, ds1305);
+		cancel_work_sync(&ds1305->work);
+	}
+
+	return 0;
+}
+
+static struct spi_driver ds1305_driver = {
+	.driver.name	= "rtc-ds1305",
+	.probe		= ds1305_probe,
+	.remove		= ds1305_remove,
+	/* REVISIT add suspend/resume */
+};
+
+module_spi_driver(ds1305_driver);
+
+MODULE_DESCRIPTION("RTC driver for DS1305 and DS1306 chips");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-ds1305");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1307.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1307.c
new file mode 100644
index 0000000..8d45d93
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1307.c
@@ -0,0 +1,1733 @@
+/*
+ * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
+ *
+ *  Copyright (C) 2005 James Chapman (ds1337 core)
+ *  Copyright (C) 2006 David Brownell
+ *  Copyright (C) 2009 Matthias Fuchs (rx8025 support)
+ *  Copyright (C) 2012 Bertrand Achard (nvram access fixes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/rtc/ds1307.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+/*
+ * We can't determine type by probing, but if we expect pre-Linux code
+ * to have set the chip up as a clock (turning on the oscillator and
+ * setting the date and time), Linux can ignore the non-clock features.
+ * That's a natural job for a factory or repair bench.
+ */
+enum ds_type {
+	ds_1307,
+	ds_1308,
+	ds_1337,
+	ds_1338,
+	ds_1339,
+	ds_1340,
+	ds_1341,
+	ds_1388,
+	ds_3231,
+	m41t0,
+	m41t00,
+	mcp794xx,
+	rx_8025,
+	rx_8130,
+	last_ds_type /* always last */
+	/* rs5c372 too?  different address... */
+};
+
+/* RTC registers don't differ much, except for the century flag */
+#define DS1307_REG_SECS		0x00	/* 00-59 */
+#	define DS1307_BIT_CH		0x80
+#	define DS1340_BIT_nEOSC		0x80
+#	define MCP794XX_BIT_ST		0x80
+#define DS1307_REG_MIN		0x01	/* 00-59 */
+#	define M41T0_BIT_OF		0x80
+#define DS1307_REG_HOUR		0x02	/* 00-23, or 1-12{am,pm} */
+#	define DS1307_BIT_12HR		0x40	/* in REG_HOUR */
+#	define DS1307_BIT_PM		0x20	/* in REG_HOUR */
+#	define DS1340_BIT_CENTURY_EN	0x80	/* in REG_HOUR */
+#	define DS1340_BIT_CENTURY	0x40	/* in REG_HOUR */
+#define DS1307_REG_WDAY		0x03	/* 01-07 */
+#	define MCP794XX_BIT_VBATEN	0x08
+#define DS1307_REG_MDAY		0x04	/* 01-31 */
+#define DS1307_REG_MONTH	0x05	/* 01-12 */
+#	define DS1337_BIT_CENTURY	0x80	/* in REG_MONTH */
+#define DS1307_REG_YEAR		0x06	/* 00-99 */
+
+/*
+ * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
+ * start at 7, and they differ a LOT. Only control and status matter for
+ * basic RTC date and time functionality; be careful using them.
+ */
+#define DS1307_REG_CONTROL	0x07		/* or ds1338 */
+#	define DS1307_BIT_OUT		0x80
+#	define DS1338_BIT_OSF		0x20
+#	define DS1307_BIT_SQWE		0x10
+#	define DS1307_BIT_RS1		0x02
+#	define DS1307_BIT_RS0		0x01
+#define DS1337_REG_CONTROL	0x0e
+#	define DS1337_BIT_nEOSC		0x80
+#	define DS1339_BIT_BBSQI		0x20
+#	define DS3231_BIT_BBSQW		0x40 /* same as BBSQI */
+#	define DS1337_BIT_RS2		0x10
+#	define DS1337_BIT_RS1		0x08
+#	define DS1337_BIT_INTCN		0x04
+#	define DS1337_BIT_A2IE		0x02
+#	define DS1337_BIT_A1IE		0x01
+#define DS1340_REG_CONTROL	0x07
+#	define DS1340_BIT_OUT		0x80
+#	define DS1340_BIT_FT		0x40
+#	define DS1340_BIT_CALIB_SIGN	0x20
+#	define DS1340_M_CALIBRATION	0x1f
+#define DS1340_REG_FLAG		0x09
+#	define DS1340_BIT_OSF		0x80
+#define DS1337_REG_STATUS	0x0f
+#	define DS1337_BIT_OSF		0x80
+#	define DS3231_BIT_EN32KHZ	0x08
+#	define DS1337_BIT_A2I		0x02
+#	define DS1337_BIT_A1I		0x01
+#define DS1339_REG_ALARM1_SECS	0x07
+
+#define DS13XX_TRICKLE_CHARGER_MAGIC	0xa0
+
+#define RX8025_REG_CTRL1	0x0e
+#	define RX8025_BIT_2412		0x20
+#define RX8025_REG_CTRL2	0x0f
+#	define RX8025_BIT_PON		0x10
+#	define RX8025_BIT_VDET		0x40
+#	define RX8025_BIT_XST		0x20
+
+struct ds1307 {
+	struct nvmem_config	nvmem_cfg;
+	enum ds_type		type;
+	unsigned long		flags;
+#define HAS_NVRAM	0		/* bit 0 == sysfs file active */
+#define HAS_ALARM	1		/* bit 1 == irq claimed */
+	struct device		*dev;
+	struct regmap		*regmap;
+	const char		*name;
+	struct rtc_device	*rtc;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clks[2];
+#endif
+};
+
+struct chip_desc {
+	unsigned		alarm:1;
+	u16			nvram_offset;
+	u16			nvram_size;
+	u8			offset; /* register's offset */
+	u8			century_reg;
+	u8			century_enable_bit;
+	u8			century_bit;
+	u8			bbsqi_bit;
+	irq_handler_t		irq_handler;
+	const struct rtc_class_ops *rtc_ops;
+	u16			trickle_charger_reg;
+	u8			(*do_trickle_setup)(struct ds1307 *, u32,
+						    bool);
+};
+
+static int ds1307_get_time(struct device *dev, struct rtc_time *t);
+static int ds1307_set_time(struct device *dev, struct rtc_time *t);
+static u8 do_trickle_setup_ds1339(struct ds1307 *, u32 ohms, bool diode);
+static irqreturn_t rx8130_irq(int irq, void *dev_id);
+static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t);
+static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t);
+static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled);
+static irqreturn_t mcp794xx_irq(int irq, void *dev_id);
+static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t);
+static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t);
+static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled);
+
+static const struct rtc_class_ops rx8130_rtc_ops = {
+	.read_time      = ds1307_get_time,
+	.set_time       = ds1307_set_time,
+	.read_alarm     = rx8130_read_alarm,
+	.set_alarm      = rx8130_set_alarm,
+	.alarm_irq_enable = rx8130_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops mcp794xx_rtc_ops = {
+	.read_time      = ds1307_get_time,
+	.set_time       = ds1307_set_time,
+	.read_alarm     = mcp794xx_read_alarm,
+	.set_alarm      = mcp794xx_set_alarm,
+	.alarm_irq_enable = mcp794xx_alarm_irq_enable,
+};
+
+static const struct chip_desc chips[last_ds_type] = {
+	[ds_1307] = {
+		.nvram_offset	= 8,
+		.nvram_size	= 56,
+	},
+	[ds_1308] = {
+		.nvram_offset	= 8,
+		.nvram_size	= 56,
+	},
+	[ds_1337] = {
+		.alarm		= 1,
+		.century_reg	= DS1307_REG_MONTH,
+		.century_bit	= DS1337_BIT_CENTURY,
+	},
+	[ds_1338] = {
+		.nvram_offset	= 8,
+		.nvram_size	= 56,
+	},
+	[ds_1339] = {
+		.alarm		= 1,
+		.century_reg	= DS1307_REG_MONTH,
+		.century_bit	= DS1337_BIT_CENTURY,
+		.bbsqi_bit	= DS1339_BIT_BBSQI,
+		.trickle_charger_reg = 0x10,
+		.do_trickle_setup = &do_trickle_setup_ds1339,
+	},
+	[ds_1340] = {
+		.century_reg	= DS1307_REG_HOUR,
+		.century_enable_bit = DS1340_BIT_CENTURY_EN,
+		.century_bit	= DS1340_BIT_CENTURY,
+		.trickle_charger_reg = 0x08,
+	},
+	[ds_1341] = {
+		.century_reg	= DS1307_REG_MONTH,
+		.century_bit	= DS1337_BIT_CENTURY,
+	},
+	[ds_1388] = {
+		.offset		= 1,
+		.trickle_charger_reg = 0x0a,
+	},
+	[ds_3231] = {
+		.alarm		= 1,
+		.century_reg	= DS1307_REG_MONTH,
+		.century_bit	= DS1337_BIT_CENTURY,
+		.bbsqi_bit	= DS3231_BIT_BBSQW,
+	},
+	[rx_8130] = {
+		.alarm		= 1,
+		/* this is battery backed SRAM */
+		.nvram_offset	= 0x20,
+		.nvram_size	= 4,	/* 32bit (4 word x 8 bit) */
+		.offset		= 0x10,
+		.irq_handler = rx8130_irq,
+		.rtc_ops = &rx8130_rtc_ops,
+	},
+	[mcp794xx] = {
+		.alarm		= 1,
+		/* this is battery backed SRAM */
+		.nvram_offset	= 0x20,
+		.nvram_size	= 0x40,
+		.irq_handler = mcp794xx_irq,
+		.rtc_ops = &mcp794xx_rtc_ops,
+	},
+};
+
+static const struct i2c_device_id ds1307_id[] = {
+	{ "ds1307", ds_1307 },
+	{ "ds1308", ds_1308 },
+	{ "ds1337", ds_1337 },
+	{ "ds1338", ds_1338 },
+	{ "ds1339", ds_1339 },
+	{ "ds1388", ds_1388 },
+	{ "ds1340", ds_1340 },
+	{ "ds1341", ds_1341 },
+	{ "ds3231", ds_3231 },
+	{ "m41t0", m41t0 },
+	{ "m41t00", m41t00 },
+	{ "mcp7940x", mcp794xx },
+	{ "mcp7941x", mcp794xx },
+	{ "pt7c4338", ds_1307 },
+	{ "rx8025", rx_8025 },
+	{ "isl12057", ds_1337 },
+	{ "rx8130", rx_8130 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds1307_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1307_of_match[] = {
+	{
+		.compatible = "dallas,ds1307",
+		.data = (void *)ds_1307
+	},
+	{
+		.compatible = "dallas,ds1308",
+		.data = (void *)ds_1308
+	},
+	{
+		.compatible = "dallas,ds1337",
+		.data = (void *)ds_1337
+	},
+	{
+		.compatible = "dallas,ds1338",
+		.data = (void *)ds_1338
+	},
+	{
+		.compatible = "dallas,ds1339",
+		.data = (void *)ds_1339
+	},
+	{
+		.compatible = "dallas,ds1388",
+		.data = (void *)ds_1388
+	},
+	{
+		.compatible = "dallas,ds1340",
+		.data = (void *)ds_1340
+	},
+	{
+		.compatible = "dallas,ds1341",
+		.data = (void *)ds_1341
+	},
+	{
+		.compatible = "maxim,ds3231",
+		.data = (void *)ds_3231
+	},
+	{
+		.compatible = "st,m41t0",
+		.data = (void *)m41t00
+	},
+	{
+		.compatible = "st,m41t00",
+		.data = (void *)m41t00
+	},
+	{
+		.compatible = "microchip,mcp7940x",
+		.data = (void *)mcp794xx
+	},
+	{
+		.compatible = "microchip,mcp7941x",
+		.data = (void *)mcp794xx
+	},
+	{
+		.compatible = "pericom,pt7c4338",
+		.data = (void *)ds_1307
+	},
+	{
+		.compatible = "epson,rx8025",
+		.data = (void *)rx_8025
+	},
+	{
+		.compatible = "isil,isl12057",
+		.data = (void *)ds_1337
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds1307_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ds1307_acpi_ids[] = {
+	{ .id = "DS1307", .driver_data = ds_1307 },
+	{ .id = "DS1308", .driver_data = ds_1308 },
+	{ .id = "DS1337", .driver_data = ds_1337 },
+	{ .id = "DS1338", .driver_data = ds_1338 },
+	{ .id = "DS1339", .driver_data = ds_1339 },
+	{ .id = "DS1388", .driver_data = ds_1388 },
+	{ .id = "DS1340", .driver_data = ds_1340 },
+	{ .id = "DS1341", .driver_data = ds_1341 },
+	{ .id = "DS3231", .driver_data = ds_3231 },
+	{ .id = "M41T0", .driver_data = m41t0 },
+	{ .id = "M41T00", .driver_data = m41t00 },
+	{ .id = "MCP7940X", .driver_data = mcp794xx },
+	{ .id = "MCP7941X", .driver_data = mcp794xx },
+	{ .id = "PT7C4338", .driver_data = ds_1307 },
+	{ .id = "RX8025", .driver_data = rx_8025 },
+	{ .id = "ISL12057", .driver_data = ds_1337 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
+#endif
+
+/*
+ * The ds1337 and ds1339 both have two alarms, but we only use the first
+ * one (with a "seconds" field).  For ds1337 we expect nINTA is our alarm
+ * signal; ds1339 chips have only one alarm signal.
+ */
+static irqreturn_t ds1307_irq(int irq, void *dev_id)
+{
+	struct ds1307		*ds1307 = dev_id;
+	struct mutex		*lock = &ds1307->rtc->ops_lock;
+	int			stat, ret;
+
+	mutex_lock(lock);
+	ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
+	if (ret)
+		goto out;
+
+	if (stat & DS1337_BIT_A1I) {
+		stat &= ~DS1337_BIT_A1I;
+		regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
+
+		ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+					 DS1337_BIT_A1IE, 0);
+		if (ret)
+			goto out;
+
+		rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+	}
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int ds1307_get_time(struct device *dev, struct rtc_time *t)
+{
+	struct ds1307	*ds1307 = dev_get_drvdata(dev);
+	int		tmp, ret;
+	const struct chip_desc *chip = &chips[ds1307->type];
+	u8 regs[7];
+
+	/* read the RTC date and time registers all at once */
+	ret = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
+			       sizeof(regs));
+	if (ret) {
+		dev_err(dev, "%s error %d\n", "read", ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s: %7ph\n", "read", regs);
+
+	/* if oscillator fail bit is set, no data can be trusted */
+	if (ds1307->type == m41t0 &&
+	    regs[DS1307_REG_MIN] & M41T0_BIT_OF) {
+		dev_warn_once(dev, "oscillator failed, set time!\n");
+		return -EINVAL;
+	}
+
+	t->tm_sec = bcd2bin(regs[DS1307_REG_SECS] & 0x7f);
+	t->tm_min = bcd2bin(regs[DS1307_REG_MIN] & 0x7f);
+	tmp = regs[DS1307_REG_HOUR] & 0x3f;
+	t->tm_hour = bcd2bin(tmp);
+	t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
+	t->tm_mday = bcd2bin(regs[DS1307_REG_MDAY] & 0x3f);
+	tmp = regs[DS1307_REG_MONTH] & 0x1f;
+	t->tm_mon = bcd2bin(tmp) - 1;
+	t->tm_year = bcd2bin(regs[DS1307_REG_YEAR]) + 100;
+
+	if (regs[chip->century_reg] & chip->century_bit &&
+	    IS_ENABLED(CONFIG_RTC_DRV_DS1307_CENTURY))
+		t->tm_year += 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	/* initial clock setting can be undefined */
+	return rtc_valid_tm(t);
+}
+
+static int ds1307_set_time(struct device *dev, struct rtc_time *t)
+{
+	struct ds1307	*ds1307 = dev_get_drvdata(dev);
+	const struct chip_desc *chip = &chips[ds1307->type];
+	int		result;
+	int		tmp;
+	u8		regs[7];
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	if (t->tm_year < 100)
+		return -EINVAL;
+
+#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
+	if (t->tm_year > (chip->century_bit ? 299 : 199))
+		return -EINVAL;
+#else
+	if (t->tm_year > 199)
+		return -EINVAL;
+#endif
+
+	regs[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
+	regs[DS1307_REG_MIN] = bin2bcd(t->tm_min);
+	regs[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
+	regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
+	regs[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
+	regs[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
+
+	/* assume 20YY not 19YY */
+	tmp = t->tm_year - 100;
+	regs[DS1307_REG_YEAR] = bin2bcd(tmp);
+
+	if (chip->century_enable_bit)
+		regs[chip->century_reg] |= chip->century_enable_bit;
+	if (t->tm_year > 199 && chip->century_bit)
+		regs[chip->century_reg] |= chip->century_bit;
+
+	if (ds1307->type == mcp794xx) {
+		/*
+		 * these bits were cleared when preparing the date/time
+		 * values and need to be set again before writing the
+		 * regsfer out to the device.
+		 */
+		regs[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
+		regs[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
+	}
+
+	dev_dbg(dev, "%s: %7ph\n", "write", regs);
+
+	result = regmap_bulk_write(ds1307->regmap, chip->offset, regs,
+				   sizeof(regs));
+	if (result) {
+		dev_err(dev, "%s error %d\n", "write", result);
+		return result;
+	}
+	return 0;
+}
+
+static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307		*ds1307 = dev_get_drvdata(dev);
+	int			ret;
+	u8			regs[9];
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	/* read all ALARM1, ALARM2, and status registers at once */
+	ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS,
+			       regs, sizeof(regs));
+	if (ret) {
+		dev_err(dev, "%s error %d\n", "alarm read", ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
+		&regs[0], &regs[4], &regs[7]);
+
+	/*
+	 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
+	 * and that all four fields are checked matches
+	 */
+	t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
+	t->time.tm_min = bcd2bin(regs[1] & 0x7f);
+	t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
+	t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
+
+	/* ... and status */
+	t->enabled = !!(regs[7] & DS1337_BIT_A1IE);
+	t->pending = !!(regs[8] & DS1337_BIT_A1I);
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, enabled=%d, pending=%d\n",
+		"alarm read", t->time.tm_sec, t->time.tm_min,
+		t->time.tm_hour, t->time.tm_mday,
+		t->enabled, t->pending);
+
+	return 0;
+}
+
+static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307		*ds1307 = dev_get_drvdata(dev);
+	unsigned char		regs[9];
+	u8			control, status;
+	int			ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, enabled=%d, pending=%d\n",
+		"alarm set", t->time.tm_sec, t->time.tm_min,
+		t->time.tm_hour, t->time.tm_mday,
+		t->enabled, t->pending);
+
+	/* read current status of both alarms and the chip */
+	ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
+			       sizeof(regs));
+	if (ret) {
+		dev_err(dev, "%s error %d\n", "alarm write", ret);
+		return ret;
+	}
+	control = regs[7];
+	status = regs[8];
+
+	dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
+		&regs[0], &regs[4], control, status);
+
+	/* set ALARM1, using 24 hour and day-of-month modes */
+	regs[0] = bin2bcd(t->time.tm_sec);
+	regs[1] = bin2bcd(t->time.tm_min);
+	regs[2] = bin2bcd(t->time.tm_hour);
+	regs[3] = bin2bcd(t->time.tm_mday);
+
+	/* set ALARM2 to non-garbage */
+	regs[4] = 0;
+	regs[5] = 0;
+	regs[6] = 0;
+
+	/* disable alarms */
+	regs[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
+	regs[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
+
+	ret = regmap_bulk_write(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
+				sizeof(regs));
+	if (ret) {
+		dev_err(dev, "can't set alarm time\n");
+		return ret;
+	}
+
+	/* optionally enable ALARM1 */
+	if (t->enabled) {
+		dev_dbg(dev, "alarm IRQ armed\n");
+		regs[7] |= DS1337_BIT_A1IE;	/* only ALARM1 is used */
+		regmap_write(ds1307->regmap, DS1337_REG_CONTROL, regs[7]);
+	}
+
+	return 0;
+}
+
+static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1307		*ds1307 = dev_get_drvdata(dev);
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -ENOTTY;
+
+	return regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+				  DS1337_BIT_A1IE,
+				  enabled ? DS1337_BIT_A1IE : 0);
+}
+
+static const struct rtc_class_ops ds13xx_rtc_ops = {
+	.read_time	= ds1307_get_time,
+	.set_time	= ds1307_set_time,
+	.read_alarm	= ds1337_read_alarm,
+	.set_alarm	= ds1337_set_alarm,
+	.alarm_irq_enable = ds1307_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Alarm support for rx8130 devices.
+ */
+
+#define RX8130_REG_ALARM_MIN		0x07
+#define RX8130_REG_ALARM_HOUR		0x08
+#define RX8130_REG_ALARM_WEEK_OR_DAY	0x09
+#define RX8130_REG_EXTENSION		0x0c
+#define RX8130_REG_EXTENSION_WADA	BIT(3)
+#define RX8130_REG_FLAG			0x0d
+#define RX8130_REG_FLAG_AF		BIT(3)
+#define RX8130_REG_CONTROL0		0x0e
+#define RX8130_REG_CONTROL0_AIE		BIT(3)
+
+static irqreturn_t rx8130_irq(int irq, void *dev_id)
+{
+	struct ds1307           *ds1307 = dev_id;
+	struct mutex            *lock = &ds1307->rtc->ops_lock;
+	u8 ctl[3];
+	int ret;
+
+	mutex_lock(lock);
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
+			       sizeof(ctl));
+	if (ret < 0)
+		goto out;
+	if (!(ctl[1] & RX8130_REG_FLAG_AF))
+		goto out;
+	ctl[1] &= ~RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
+				sizeof(ctl));
+	if (ret < 0)
+		goto out;
+
+	rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	/* Read alarm registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
+			       sizeof(ald));
+	if (ret < 0)
+		return ret;
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
+			       sizeof(ctl));
+	if (ret < 0)
+		return ret;
+
+	t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
+	t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
+
+	/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
+	t->time.tm_sec = -1;
+	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+	t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
+	t->time.tm_wday = -1;
+	t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
+	t->time.tm_mon = -1;
+	t->time.tm_year = -1;
+	t->time.tm_yday = -1;
+	t->time.tm_isdst = -1;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
+		__func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
+
+	return 0;
+}
+
+static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+		"enabled=%d pending=%d\n", __func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
+		t->enabled, t->pending);
+
+	/* Read control registers. */
+	ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
+			       sizeof(ctl));
+	if (ret < 0)
+		return ret;
+
+	ctl[0] &= RX8130_REG_EXTENSION_WADA;
+	ctl[1] &= ~RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
+				sizeof(ctl));
+	if (ret < 0)
+		return ret;
+
+	/* Hardware alarm precision is 1 minute! */
+	ald[0] = bin2bcd(t->time.tm_min);
+	ald[1] = bin2bcd(t->time.tm_hour);
+	ald[2] = bin2bcd(t->time.tm_mday);
+
+	ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
+				sizeof(ald));
+	if (ret < 0)
+		return ret;
+
+	if (!t->enabled)
+		return 0;
+
+	ctl[2] |= RX8130_REG_CONTROL0_AIE;
+
+	return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, ctl[2]);
+}
+
+static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	int ret, reg;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	ret = regmap_read(ds1307->regmap, RX8130_REG_CONTROL0, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (enabled)
+		reg |= RX8130_REG_CONTROL0_AIE;
+	else
+		reg &= ~RX8130_REG_CONTROL0_AIE;
+
+	return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Alarm support for mcp794xx devices.
+ */
+
+#define MCP794XX_REG_WEEKDAY		0x3
+#define MCP794XX_REG_WEEKDAY_WDAY_MASK	0x7
+#define MCP794XX_REG_CONTROL		0x07
+#	define MCP794XX_BIT_ALM0_EN	0x10
+#	define MCP794XX_BIT_ALM1_EN	0x20
+#define MCP794XX_REG_ALARM0_BASE	0x0a
+#define MCP794XX_REG_ALARM0_CTRL	0x0d
+#define MCP794XX_REG_ALARM1_BASE	0x11
+#define MCP794XX_REG_ALARM1_CTRL	0x14
+#	define MCP794XX_BIT_ALMX_IF	BIT(3)
+#	define MCP794XX_BIT_ALMX_C0	BIT(4)
+#	define MCP794XX_BIT_ALMX_C1	BIT(5)
+#	define MCP794XX_BIT_ALMX_C2	BIT(6)
+#	define MCP794XX_BIT_ALMX_POL	BIT(7)
+#	define MCP794XX_MSK_ALMX_MATCH	(MCP794XX_BIT_ALMX_C0 | \
+					 MCP794XX_BIT_ALMX_C1 | \
+					 MCP794XX_BIT_ALMX_C2)
+
+static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
+{
+	struct ds1307           *ds1307 = dev_id;
+	struct mutex            *lock = &ds1307->rtc->ops_lock;
+	int reg, ret;
+
+	mutex_lock(lock);
+
+	/* Check and clear alarm 0 interrupt flag. */
+	ret = regmap_read(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, &reg);
+	if (ret)
+		goto out;
+	if (!(reg & MCP794XX_BIT_ALMX_IF))
+		goto out;
+	reg &= ~MCP794XX_BIT_ALMX_IF;
+	ret = regmap_write(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, reg);
+	if (ret)
+		goto out;
+
+	/* Disable alarm 0. */
+	ret = regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
+				 MCP794XX_BIT_ALM0_EN, 0);
+	if (ret)
+		goto out;
+
+	rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 regs[10];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	/* Read control and alarm 0 registers. */
+	ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
+			       sizeof(regs));
+	if (ret)
+		return ret;
+
+	t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
+
+	/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
+	t->time.tm_sec = bcd2bin(regs[3] & 0x7f);
+	t->time.tm_min = bcd2bin(regs[4] & 0x7f);
+	t->time.tm_hour = bcd2bin(regs[5] & 0x3f);
+	t->time.tm_wday = bcd2bin(regs[6] & 0x7) - 1;
+	t->time.tm_mday = bcd2bin(regs[7] & 0x3f);
+	t->time.tm_mon = bcd2bin(regs[8] & 0x1f) - 1;
+	t->time.tm_year = -1;
+	t->time.tm_yday = -1;
+	t->time.tm_isdst = -1;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+		"enabled=%d polarity=%d irq=%d match=%lu\n", __func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
+		!!(regs[6] & MCP794XX_BIT_ALMX_POL),
+		!!(regs[6] & MCP794XX_BIT_ALMX_IF),
+		(regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
+
+	return 0;
+}
+
+static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	unsigned char regs[10];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+		"enabled=%d pending=%d\n", __func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
+		t->enabled, t->pending);
+
+	/* Read control and alarm 0 registers. */
+	ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
+			       sizeof(regs));
+	if (ret)
+		return ret;
+
+	/* Set alarm 0, using 24-hour and day-of-month modes. */
+	regs[3] = bin2bcd(t->time.tm_sec);
+	regs[4] = bin2bcd(t->time.tm_min);
+	regs[5] = bin2bcd(t->time.tm_hour);
+	regs[6] = bin2bcd(t->time.tm_wday + 1);
+	regs[7] = bin2bcd(t->time.tm_mday);
+	regs[8] = bin2bcd(t->time.tm_mon + 1);
+
+	/* Clear the alarm 0 interrupt flag. */
+	regs[6] &= ~MCP794XX_BIT_ALMX_IF;
+	/* Set alarm match: second, minute, hour, day, date, month. */
+	regs[6] |= MCP794XX_MSK_ALMX_MATCH;
+	/* Disable interrupt. We will not enable until completely programmed */
+	regs[0] &= ~MCP794XX_BIT_ALM0_EN;
+
+	ret = regmap_bulk_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
+				sizeof(regs));
+	if (ret)
+		return ret;
+
+	if (!t->enabled)
+		return 0;
+	regs[0] |= MCP794XX_BIT_ALM0_EN;
+	return regmap_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs[0]);
+}
+
+static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	return regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
+				  MCP794XX_BIT_ALM0_EN,
+				  enabled ? MCP794XX_BIT_ALM0_EN : 0);
+}
+
+/*----------------------------------------------------------------------*/
+
+static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct ds1307 *ds1307 = priv;
+	const struct chip_desc *chip = &chips[ds1307->type];
+
+	return regmap_bulk_read(ds1307->regmap, chip->nvram_offset + offset,
+				val, bytes);
+}
+
+static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	struct ds1307 *ds1307 = priv;
+	const struct chip_desc *chip = &chips[ds1307->type];
+
+	return regmap_bulk_write(ds1307->regmap, chip->nvram_offset + offset,
+				 val, bytes);
+}
+
+/*----------------------------------------------------------------------*/
+
+static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307,
+				  u32 ohms, bool diode)
+{
+	u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
+		DS1307_TRICKLE_CHARGER_NO_DIODE;
+
+	switch (ohms) {
+	case 250:
+		setup |= DS1307_TRICKLE_CHARGER_250_OHM;
+		break;
+	case 2000:
+		setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
+		break;
+	case 4000:
+		setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
+		break;
+	default:
+		dev_warn(ds1307->dev,
+			 "Unsupported ohm value %u in dt\n", ohms);
+		return 0;
+	}
+	return setup;
+}
+
+static u8 ds1307_trickle_init(struct ds1307 *ds1307,
+			      const struct chip_desc *chip)
+{
+	u32 ohms;
+	bool diode = true;
+
+	if (!chip->do_trickle_setup)
+		return 0;
+
+	if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
+				     &ohms))
+		return 0;
+
+	if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
+		diode = false;
+
+	return chip->do_trickle_setup(ds1307, ohms, diode);
+}
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_RTC_DRV_DS1307_HWMON
+
+/*
+ * Temperature sensor support for ds3231 devices.
+ */
+
+#define DS3231_REG_TEMPERATURE	0x11
+
+/*
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	u8 temp_buf[2];
+	s16 temp;
+	int ret;
+
+	ret = regmap_bulk_read(ds1307->regmap, DS3231_REG_TEMPERATURE,
+			       temp_buf, sizeof(temp_buf));
+	if (ret)
+		return ret;
+	/*
+	 * Temperature is represented as a 10-bit code with a resolution of
+	 * 0.25 degree celsius and encoded in two's complement format.
+	 */
+	temp = (temp_buf[0] << 8) | temp_buf[1];
+	temp >>= 6;
+	*mC = temp * 250;
+
+	return 0;
+}
+
+static ssize_t ds3231_hwmon_show_temp(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	int ret;
+	s32 temp;
+
+	ret = ds3231_hwmon_read_temp(dev, &temp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", temp);
+}
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, ds3231_hwmon_show_temp,
+			  NULL, 0);
+
+static struct attribute *ds3231_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ds3231_hwmon);
+
+static void ds1307_hwmon_register(struct ds1307 *ds1307)
+{
+	struct device *dev;
+
+	if (ds1307->type != ds_3231)
+		return;
+
+	dev = devm_hwmon_device_register_with_groups(ds1307->dev, ds1307->name,
+						     ds1307,
+						     ds3231_hwmon_groups);
+	if (IS_ERR(dev)) {
+		dev_warn(ds1307->dev, "unable to register hwmon device %ld\n",
+			 PTR_ERR(dev));
+	}
+}
+
+#else
+
+static void ds1307_hwmon_register(struct ds1307 *ds1307)
+{
+}
+
+#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Square-wave output support for DS3231
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
+ */
+#ifdef CONFIG_COMMON_CLK
+
+enum {
+	DS3231_CLK_SQW = 0,
+	DS3231_CLK_32KHZ,
+};
+
+#define clk_sqw_to_ds1307(clk)	\
+	container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
+#define clk_32khz_to_ds1307(clk)	\
+	container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
+
+static int ds3231_clk_sqw_rates[] = {
+	1,
+	1024,
+	4096,
+	8192,
+};
+
+static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
+{
+	struct mutex *lock = &ds1307->rtc->ops_lock;
+	int ret;
+
+	mutex_lock(lock);
+	ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+				 mask, value);
+	mutex_unlock(lock);
+
+	return ret;
+}
+
+static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+	int control, ret;
+	int rate_sel = 0;
+
+	ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
+	if (ret)
+		return ret;
+	if (control & DS1337_BIT_RS1)
+		rate_sel += 1;
+	if (control & DS1337_BIT_RS2)
+		rate_sel += 2;
+
+	return ds3231_clk_sqw_rates[rate_sel];
+}
+
+static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	int i;
+
+	for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
+		if (ds3231_clk_sqw_rates[i] <= rate)
+			return ds3231_clk_sqw_rates[i];
+	}
+
+	return 0;
+}
+
+static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+	int control = 0;
+	int rate_sel;
+
+	for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
+			rate_sel++) {
+		if (ds3231_clk_sqw_rates[rate_sel] == rate)
+			break;
+	}
+
+	if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
+		return -EINVAL;
+
+	if (rate_sel & 1)
+		control |= DS1337_BIT_RS1;
+	if (rate_sel & 2)
+		control |= DS1337_BIT_RS2;
+
+	return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
+				control);
+}
+
+static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+
+	return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
+}
+
+static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+
+	ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
+}
+
+static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+	int control, ret;
+
+	ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
+	if (ret)
+		return ret;
+
+	return !(control & DS1337_BIT_INTCN);
+}
+
+static const struct clk_ops ds3231_clk_sqw_ops = {
+	.prepare = ds3231_clk_sqw_prepare,
+	.unprepare = ds3231_clk_sqw_unprepare,
+	.is_prepared = ds3231_clk_sqw_is_prepared,
+	.recalc_rate = ds3231_clk_sqw_recalc_rate,
+	.round_rate = ds3231_clk_sqw_round_rate,
+	.set_rate = ds3231_clk_sqw_set_rate,
+};
+
+static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	return 32768;
+}
+
+static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
+{
+	struct mutex *lock = &ds1307->rtc->ops_lock;
+	int ret;
+
+	mutex_lock(lock);
+	ret = regmap_update_bits(ds1307->regmap, DS1337_REG_STATUS,
+				 DS3231_BIT_EN32KHZ,
+				 enable ? DS3231_BIT_EN32KHZ : 0);
+	mutex_unlock(lock);
+
+	return ret;
+}
+
+static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+
+	return ds3231_clk_32khz_control(ds1307, true);
+}
+
+static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+
+	ds3231_clk_32khz_control(ds1307, false);
+}
+
+static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
+{
+	struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+	int status, ret;
+
+	ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &status);
+	if (ret)
+		return ret;
+
+	return !!(status & DS3231_BIT_EN32KHZ);
+}
+
+static const struct clk_ops ds3231_clk_32khz_ops = {
+	.prepare = ds3231_clk_32khz_prepare,
+	.unprepare = ds3231_clk_32khz_unprepare,
+	.is_prepared = ds3231_clk_32khz_is_prepared,
+	.recalc_rate = ds3231_clk_32khz_recalc_rate,
+};
+
+static struct clk_init_data ds3231_clks_init[] = {
+	[DS3231_CLK_SQW] = {
+		.name = "ds3231_clk_sqw",
+		.ops = &ds3231_clk_sqw_ops,
+	},
+	[DS3231_CLK_32KHZ] = {
+		.name = "ds3231_clk_32khz",
+		.ops = &ds3231_clk_32khz_ops,
+	},
+};
+
+static int ds3231_clks_register(struct ds1307 *ds1307)
+{
+	struct device_node *node = ds1307->dev->of_node;
+	struct clk_onecell_data	*onecell;
+	int i;
+
+	onecell = devm_kzalloc(ds1307->dev, sizeof(*onecell), GFP_KERNEL);
+	if (!onecell)
+		return -ENOMEM;
+
+	onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
+	onecell->clks = devm_kcalloc(ds1307->dev, onecell->clk_num,
+				     sizeof(onecell->clks[0]), GFP_KERNEL);
+	if (!onecell->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
+		struct clk_init_data init = ds3231_clks_init[i];
+
+		/*
+		 * Interrupt signal due to alarm conditions and square-wave
+		 * output share same pin, so don't initialize both.
+		 */
+		if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
+			continue;
+
+		/* optional override of the clockname */
+		of_property_read_string_index(node, "clock-output-names", i,
+					      &init.name);
+		ds1307->clks[i].init = &init;
+
+		onecell->clks[i] = devm_clk_register(ds1307->dev,
+						     &ds1307->clks[i]);
+		if (IS_ERR(onecell->clks[i]))
+			return PTR_ERR(onecell->clks[i]);
+	}
+
+	if (!node)
+		return 0;
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
+
+	return 0;
+}
+
+static void ds1307_clks_register(struct ds1307 *ds1307)
+{
+	int ret;
+
+	if (ds1307->type != ds_3231)
+		return;
+
+	ret = ds3231_clks_register(ds1307);
+	if (ret) {
+		dev_warn(ds1307->dev, "unable to register clock device %d\n",
+			 ret);
+	}
+}
+
+#else
+
+static void ds1307_clks_register(struct ds1307 *ds1307)
+{
+}
+
+#endif /* CONFIG_COMMON_CLK */
+
+static const struct regmap_config regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int ds1307_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ds1307		*ds1307;
+	int			err = -ENODEV;
+	int			tmp, wday;
+	const struct chip_desc	*chip;
+	bool			want_irq;
+	bool			ds1307_can_wakeup_device = false;
+	unsigned char		regs[8];
+	struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct rtc_time		tm;
+	unsigned long		timestamp;
+	u8			trickle_charger_setup = 0;
+
+	ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
+	if (!ds1307)
+		return -ENOMEM;
+
+	dev_set_drvdata(&client->dev, ds1307);
+	ds1307->dev = &client->dev;
+	ds1307->name = client->name;
+
+	ds1307->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(ds1307->regmap)) {
+		dev_err(ds1307->dev, "regmap allocation failed\n");
+		return PTR_ERR(ds1307->regmap);
+	}
+
+	i2c_set_clientdata(client, ds1307);
+
+	if (client->dev.of_node) {
+		ds1307->type = (enum ds_type)
+			of_device_get_match_data(&client->dev);
+		chip = &chips[ds1307->type];
+	} else if (id) {
+		chip = &chips[id->driver_data];
+		ds1307->type = id->driver_data;
+	} else {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
+					    ds1307->dev);
+		if (!acpi_id)
+			return -ENODEV;
+		chip = &chips[acpi_id->driver_data];
+		ds1307->type = acpi_id->driver_data;
+	}
+
+	want_irq = client->irq > 0 && chip->alarm;
+
+	if (!pdata)
+		trickle_charger_setup = ds1307_trickle_init(ds1307, chip);
+	else if (pdata->trickle_charger_setup)
+		trickle_charger_setup = pdata->trickle_charger_setup;
+
+	if (trickle_charger_setup && chip->trickle_charger_reg) {
+		trickle_charger_setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
+		dev_dbg(ds1307->dev,
+			"writing trickle charger info 0x%x to 0x%x\n",
+			trickle_charger_setup, chip->trickle_charger_reg);
+		regmap_write(ds1307->regmap, chip->trickle_charger_reg,
+			     trickle_charger_setup);
+	}
+
+#ifdef CONFIG_OF
+/*
+ * For devices with no IRQ directly connected to the SoC, the RTC chip
+ * can be forced as a wakeup source by stating that explicitly in
+ * the device's .dts file using the "wakeup-source" boolean property.
+ * If the "wakeup-source" property is set, don't request an IRQ.
+ * This will guarantee the 'wakealarm' sysfs entry is available on the device,
+ * if supported by the RTC.
+ */
+	if (chip->alarm && of_property_read_bool(client->dev.of_node,
+						 "wakeup-source"))
+		ds1307_can_wakeup_device = true;
+#endif
+
+	switch (ds1307->type) {
+	case ds_1337:
+	case ds_1339:
+	case ds_1341:
+	case ds_3231:
+		/* get registers that the "rtc" read below won't read... */
+		err = regmap_bulk_read(ds1307->regmap, DS1337_REG_CONTROL,
+				       regs, 2);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator off?  turn it on, so clock can tick. */
+		if (regs[0] & DS1337_BIT_nEOSC)
+			regs[0] &= ~DS1337_BIT_nEOSC;
+
+		/*
+		 * Using IRQ or defined as wakeup-source?
+		 * Disable the square wave and both alarms.
+		 * For some variants, be sure alarms can trigger when we're
+		 * running on Vbackup (BBSQI/BBSQW)
+		 */
+		if (want_irq || ds1307_can_wakeup_device) {
+			regs[0] |= DS1337_BIT_INTCN | chip->bbsqi_bit;
+			regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
+		}
+
+		regmap_write(ds1307->regmap, DS1337_REG_CONTROL,
+			     regs[0]);
+
+		/* oscillator fault?  clear flag, and warn */
+		if (regs[1] & DS1337_BIT_OSF) {
+			regmap_write(ds1307->regmap, DS1337_REG_STATUS,
+				     regs[1] & ~DS1337_BIT_OSF);
+			dev_warn(ds1307->dev, "SET TIME!\n");
+		}
+		break;
+
+	case rx_8025:
+		err = regmap_bulk_read(ds1307->regmap,
+				       RX8025_REG_CTRL1 << 4 | 0x08, regs, 2);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator off?  turn it on, so clock can tick. */
+		if (!(regs[1] & RX8025_BIT_XST)) {
+			regs[1] |= RX8025_BIT_XST;
+			regmap_write(ds1307->regmap,
+				     RX8025_REG_CTRL2 << 4 | 0x08,
+				     regs[1]);
+			dev_warn(ds1307->dev,
+				 "oscillator stop detected - SET TIME!\n");
+		}
+
+		if (regs[1] & RX8025_BIT_PON) {
+			regs[1] &= ~RX8025_BIT_PON;
+			regmap_write(ds1307->regmap,
+				     RX8025_REG_CTRL2 << 4 | 0x08,
+				     regs[1]);
+			dev_warn(ds1307->dev, "power-on detected\n");
+		}
+
+		if (regs[1] & RX8025_BIT_VDET) {
+			regs[1] &= ~RX8025_BIT_VDET;
+			regmap_write(ds1307->regmap,
+				     RX8025_REG_CTRL2 << 4 | 0x08,
+				     regs[1]);
+			dev_warn(ds1307->dev, "voltage drop detected\n");
+		}
+
+		/* make sure we are running in 24hour mode */
+		if (!(regs[0] & RX8025_BIT_2412)) {
+			u8 hour;
+
+			/* switch to 24 hour mode */
+			regmap_write(ds1307->regmap,
+				     RX8025_REG_CTRL1 << 4 | 0x08,
+				     regs[0] | RX8025_BIT_2412);
+
+			err = regmap_bulk_read(ds1307->regmap,
+					       RX8025_REG_CTRL1 << 4 | 0x08,
+					       regs, 2);
+			if (err) {
+				dev_dbg(ds1307->dev, "read error %d\n", err);
+				goto exit;
+			}
+
+			/* correct hour */
+			hour = bcd2bin(regs[DS1307_REG_HOUR]);
+			if (hour == 12)
+				hour = 0;
+			if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+				hour += 12;
+
+			regmap_write(ds1307->regmap,
+				     DS1307_REG_HOUR << 4 | 0x08, hour);
+		}
+		break;
+	default:
+		break;
+	}
+
+read_rtc:
+	/* read RTC registers */
+	err = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
+			       sizeof(regs));
+	if (err) {
+		dev_dbg(ds1307->dev, "read error %d\n", err);
+		goto exit;
+	}
+
+	/*
+	 * minimal sanity checking; some chips (like DS1340) don't
+	 * specify the extra bits as must-be-zero, but there are
+	 * still a few values that are clearly out-of-range.
+	 */
+	tmp = regs[DS1307_REG_SECS];
+	switch (ds1307->type) {
+	case ds_1307:
+	case m41t0:
+	case m41t00:
+		/* clock halted?  turn it on, so clock can tick. */
+		if (tmp & DS1307_BIT_CH) {
+			regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
+			dev_warn(ds1307->dev, "SET TIME!\n");
+			goto read_rtc;
+		}
+		break;
+	case ds_1308:
+	case ds_1338:
+		/* clock halted?  turn it on, so clock can tick. */
+		if (tmp & DS1307_BIT_CH)
+			regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
+
+		/* oscillator fault?  clear flag, and warn */
+		if (regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
+			regmap_write(ds1307->regmap, DS1307_REG_CONTROL,
+				     regs[DS1307_REG_CONTROL] &
+				     ~DS1338_BIT_OSF);
+			dev_warn(ds1307->dev, "SET TIME!\n");
+			goto read_rtc;
+		}
+		break;
+	case ds_1340:
+		/* clock halted?  turn it on, so clock can tick. */
+		if (tmp & DS1340_BIT_nEOSC)
+			regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
+
+		err = regmap_read(ds1307->regmap, DS1340_REG_FLAG, &tmp);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator fault?  clear flag, and warn */
+		if (tmp & DS1340_BIT_OSF) {
+			regmap_write(ds1307->regmap, DS1340_REG_FLAG, 0);
+			dev_warn(ds1307->dev, "SET TIME!\n");
+		}
+		break;
+	case mcp794xx:
+		/* make sure that the backup battery is enabled */
+		if (!(regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
+			regmap_write(ds1307->regmap, DS1307_REG_WDAY,
+				     regs[DS1307_REG_WDAY] |
+				     MCP794XX_BIT_VBATEN);
+		}
+
+		/* clock halted?  turn it on, so clock can tick. */
+		if (!(tmp & MCP794XX_BIT_ST)) {
+			regmap_write(ds1307->regmap, DS1307_REG_SECS,
+				     MCP794XX_BIT_ST);
+			dev_warn(ds1307->dev, "SET TIME!\n");
+			goto read_rtc;
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	tmp = regs[DS1307_REG_HOUR];
+	switch (ds1307->type) {
+	case ds_1340:
+	case m41t0:
+	case m41t00:
+		/*
+		 * NOTE: ignores century bits; fix before deploying
+		 * systems that will run through year 2100.
+		 */
+		break;
+	case rx_8025:
+		break;
+	default:
+		if (!(tmp & DS1307_BIT_12HR))
+			break;
+
+		/*
+		 * Be sure we're in 24 hour mode.  Multi-master systems
+		 * take note...
+		 */
+		tmp = bcd2bin(tmp & 0x1f);
+		if (tmp == 12)
+			tmp = 0;
+		if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+			tmp += 12;
+		regmap_write(ds1307->regmap, chip->offset + DS1307_REG_HOUR,
+			     bin2bcd(tmp));
+	}
+
+	/*
+	 * Some IPs have weekday reset value = 0x1 which might not correct
+	 * hence compute the wday using the current date/month/year values
+	 */
+	ds1307_get_time(ds1307->dev, &tm);
+	wday = tm.tm_wday;
+	timestamp = rtc_tm_to_time64(&tm);
+	rtc_time64_to_tm(timestamp, &tm);
+
+	/*
+	 * Check if reset wday is different from the computed wday
+	 * If different then set the wday which we computed using
+	 * timestamp
+	 */
+	if (wday != tm.tm_wday)
+		regmap_update_bits(ds1307->regmap, MCP794XX_REG_WEEKDAY,
+				   MCP794XX_REG_WEEKDAY_WDAY_MASK,
+				   tm.tm_wday + 1);
+
+	if (want_irq || ds1307_can_wakeup_device) {
+		device_set_wakeup_capable(ds1307->dev, true);
+		set_bit(HAS_ALARM, &ds1307->flags);
+	}
+
+	ds1307->rtc = devm_rtc_allocate_device(ds1307->dev);
+	if (IS_ERR(ds1307->rtc))
+		return PTR_ERR(ds1307->rtc);
+
+	if (ds1307_can_wakeup_device && !want_irq) {
+		dev_info(ds1307->dev,
+			 "'wakeup-source' is set, request for an IRQ is disabled!\n");
+		/* We cannot support UIE mode if we do not have an IRQ line */
+		ds1307->rtc->uie_unsupported = 1;
+	}
+
+	if (want_irq) {
+		err = devm_request_threaded_irq(ds1307->dev, client->irq, NULL,
+						chip->irq_handler ?: ds1307_irq,
+						IRQF_SHARED | IRQF_ONESHOT,
+						ds1307->name, ds1307);
+		if (err) {
+			client->irq = 0;
+			device_set_wakeup_capable(ds1307->dev, false);
+			clear_bit(HAS_ALARM, &ds1307->flags);
+			dev_err(ds1307->dev, "unable to request IRQ!\n");
+		} else {
+			dev_dbg(ds1307->dev, "got IRQ %d\n", client->irq);
+		}
+	}
+
+	if (chip->nvram_size) {
+		ds1307->nvmem_cfg.name = "ds1307_nvram";
+		ds1307->nvmem_cfg.word_size = 1;
+		ds1307->nvmem_cfg.stride = 1;
+		ds1307->nvmem_cfg.size = chip->nvram_size;
+		ds1307->nvmem_cfg.reg_read = ds1307_nvram_read;
+		ds1307->nvmem_cfg.reg_write = ds1307_nvram_write;
+		ds1307->nvmem_cfg.priv = ds1307;
+
+		ds1307->rtc->nvmem_config = &ds1307->nvmem_cfg;
+		ds1307->rtc->nvram_old_abi = true;
+	}
+
+	ds1307->rtc->ops = chip->rtc_ops ?: &ds13xx_rtc_ops;
+	err = rtc_register_device(ds1307->rtc);
+	if (err)
+		return err;
+
+	ds1307_hwmon_register(ds1307);
+	ds1307_clks_register(ds1307);
+
+	return 0;
+
+exit:
+	return err;
+}
+
+static struct i2c_driver ds1307_driver = {
+	.driver = {
+		.name	= "rtc-ds1307",
+		.of_match_table = of_match_ptr(ds1307_of_match),
+		.acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
+	},
+	.probe		= ds1307_probe,
+	.id_table	= ds1307_id,
+};
+
+module_i2c_driver(ds1307_driver);
+
+MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1343.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1343.c
new file mode 100644
index 0000000..895fbee
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1343.c
@@ -0,0 +1,742 @@
+/* rtc-ds1343.c
+ *
+ * Driver for Dallas Semiconductor DS1343 Low Current, SPI Compatible
+ * Real Time Clock
+ *
+ * Author : Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
+ *	    Ankur Srivastava <sankurece@gmail.com> : DS1343 Nvram Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/pm.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define DALLAS_MAXIM_DS1343	0
+#define DALLAS_MAXIM_DS1344	1
+
+/* RTC DS1343 Registers */
+#define DS1343_SECONDS_REG	0x00
+#define DS1343_MINUTES_REG	0x01
+#define DS1343_HOURS_REG	0x02
+#define DS1343_DAY_REG		0x03
+#define DS1343_DATE_REG		0x04
+#define DS1343_MONTH_REG	0x05
+#define DS1343_YEAR_REG		0x06
+#define DS1343_ALM0_SEC_REG	0x07
+#define DS1343_ALM0_MIN_REG	0x08
+#define DS1343_ALM0_HOUR_REG	0x09
+#define DS1343_ALM0_DAY_REG	0x0A
+#define DS1343_ALM1_SEC_REG	0x0B
+#define DS1343_ALM1_MIN_REG	0x0C
+#define DS1343_ALM1_HOUR_REG	0x0D
+#define DS1343_ALM1_DAY_REG	0x0E
+#define DS1343_CONTROL_REG	0x0F
+#define DS1343_STATUS_REG	0x10
+#define DS1343_TRICKLE_REG	0x11
+#define DS1343_NVRAM		0x20
+
+#define DS1343_NVRAM_LEN	96
+
+/* DS1343 Control Registers bits */
+#define DS1343_EOSC		0x80
+#define DS1343_DOSF		0x20
+#define DS1343_EGFIL		0x10
+#define DS1343_SQW		0x08
+#define DS1343_INTCN		0x04
+#define DS1343_A1IE		0x02
+#define DS1343_A0IE		0x01
+
+/* DS1343 Status Registers bits */
+#define DS1343_OSF		0x80
+#define DS1343_IRQF1		0x02
+#define DS1343_IRQF0		0x01
+
+/* DS1343 Trickle Charger Registers bits */
+#define DS1343_TRICKLE_MAGIC	0xa0
+#define DS1343_TRICKLE_DS1	0x08
+#define DS1343_TRICKLE_1K	0x01
+#define DS1343_TRICKLE_2K	0x02
+#define DS1343_TRICKLE_4K	0x03
+
+static const struct spi_device_id ds1343_id[] = {
+	{ "ds1343", DALLAS_MAXIM_DS1343 },
+	{ "ds1344", DALLAS_MAXIM_DS1344 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ds1343_id);
+
+struct ds1343_priv {
+	struct spi_device *spi;
+	struct rtc_device *rtc;
+	struct regmap *map;
+	struct mutex mutex;
+	unsigned int irqen;
+	int irq;
+	int alarm_sec;
+	int alarm_min;
+	int alarm_hour;
+	int alarm_mday;
+};
+
+static int ds1343_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+#ifdef RTC_SET_CHARGE
+	case RTC_SET_CHARGE:
+	{
+		int val;
+
+		if (copy_from_user(&val, (int __user *)arg, sizeof(int)))
+			return -EFAULT;
+
+		return regmap_write(priv->map, DS1343_TRICKLE_REG, val);
+	}
+	break;
+#endif
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static ssize_t ds1343_show_glitchfilter(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int glitch_filt_status, data;
+
+	regmap_read(priv->map, DS1343_CONTROL_REG, &data);
+
+	glitch_filt_status = !!(data & DS1343_EGFIL);
+
+	if (glitch_filt_status)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static ssize_t ds1343_store_glitchfilter(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int data;
+
+	regmap_read(priv->map, DS1343_CONTROL_REG, &data);
+
+	if (strncmp(buf, "enabled", 7) == 0)
+		data |= DS1343_EGFIL;
+
+	else if (strncmp(buf, "disabled", 8) == 0)
+		data &= ~(DS1343_EGFIL);
+
+	else
+		return -EINVAL;
+
+	regmap_write(priv->map, DS1343_CONTROL_REG, data);
+
+	return count;
+}
+
+static DEVICE_ATTR(glitch_filter, S_IRUGO | S_IWUSR, ds1343_show_glitchfilter,
+			ds1343_store_glitchfilter);
+
+static ssize_t ds1343_nvram_write(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *attr,
+			char *buf, loff_t off, size_t count)
+{
+	int ret;
+	unsigned char address;
+	struct device *dev = kobj_to_dev(kobj);
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+
+	address = DS1343_NVRAM + off;
+
+	ret = regmap_bulk_write(priv->map, address, buf, count);
+	if (ret < 0)
+		dev_err(&priv->spi->dev, "Error in nvram write %d", ret);
+
+	return (ret < 0) ? ret : count;
+}
+
+
+static ssize_t ds1343_nvram_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *attr,
+				char *buf, loff_t off, size_t count)
+{
+	int ret;
+	unsigned char address;
+	struct device *dev = kobj_to_dev(kobj);
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+
+	address = DS1343_NVRAM + off;
+
+	ret = regmap_bulk_read(priv->map, address, buf, count);
+	if (ret < 0)
+		dev_err(&priv->spi->dev, "Error in nvram read %d\n", ret);
+
+	return (ret < 0) ? ret : count;
+}
+
+
+static struct bin_attribute nvram_attr = {
+	.attr.name	= "nvram",
+	.attr.mode	= S_IRUGO | S_IWUSR,
+	.read		= ds1343_nvram_read,
+	.write		= ds1343_nvram_write,
+	.size		= DS1343_NVRAM_LEN,
+};
+
+static ssize_t ds1343_show_alarmstatus(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int alarmstatus, data;
+
+	regmap_read(priv->map, DS1343_CONTROL_REG, &data);
+
+	alarmstatus = !!(data & DS1343_A0IE);
+
+	if (alarmstatus)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static DEVICE_ATTR(alarm_status, S_IRUGO, ds1343_show_alarmstatus, NULL);
+
+static ssize_t ds1343_show_alarmmode(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int alarm_mode, data;
+	char *alarm_str;
+
+	regmap_read(priv->map, DS1343_ALM0_SEC_REG, &data);
+	alarm_mode = (data & 0x80) >> 4;
+
+	regmap_read(priv->map, DS1343_ALM0_MIN_REG, &data);
+	alarm_mode |= (data & 0x80) >> 5;
+
+	regmap_read(priv->map, DS1343_ALM0_HOUR_REG, &data);
+	alarm_mode |= (data & 0x80) >> 6;
+
+	regmap_read(priv->map, DS1343_ALM0_DAY_REG, &data);
+	alarm_mode |= (data & 0x80) >> 7;
+
+	switch (alarm_mode) {
+	case 15:
+		alarm_str = "each second";
+		break;
+
+	case 7:
+		alarm_str = "seconds match";
+		break;
+
+	case 3:
+		alarm_str = "minutes and seconds match";
+		break;
+
+	case 1:
+		alarm_str = "hours, minutes and seconds match";
+		break;
+
+	case 0:
+		alarm_str = "day, hours, minutes and seconds match";
+		break;
+
+	default:
+		alarm_str = "invalid";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", alarm_str);
+}
+
+static DEVICE_ATTR(alarm_mode, S_IRUGO, ds1343_show_alarmmode, NULL);
+
+static ssize_t ds1343_show_tricklecharger(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int data;
+	char *diodes = "disabled", *resistors = " ";
+
+	regmap_read(priv->map, DS1343_TRICKLE_REG, &data);
+
+	if ((data & 0xf0) == DS1343_TRICKLE_MAGIC) {
+		switch (data & 0x0c) {
+		case DS1343_TRICKLE_DS1:
+			diodes = "one diode,";
+			break;
+
+		default:
+			diodes = "no diode,";
+			break;
+		}
+
+		switch (data & 0x03) {
+		case DS1343_TRICKLE_1K:
+			resistors = "1k Ohm";
+			break;
+
+		case DS1343_TRICKLE_2K:
+			resistors = "2k Ohm";
+			break;
+
+		case DS1343_TRICKLE_4K:
+			resistors = "4k Ohm";
+			break;
+
+		default:
+			diodes = "disabled";
+			break;
+		}
+	}
+
+	return sprintf(buf, "%s %s\n", diodes, resistors);
+}
+
+static DEVICE_ATTR(trickle_charger, S_IRUGO, ds1343_show_tricklecharger, NULL);
+
+static int ds1343_sysfs_register(struct device *dev)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int err;
+
+	err = device_create_file(dev, &dev_attr_glitch_filter);
+	if (err)
+		return err;
+
+	err = device_create_file(dev, &dev_attr_trickle_charger);
+	if (err)
+		goto error1;
+
+	err = device_create_bin_file(dev, &nvram_attr);
+	if (err)
+		goto error2;
+
+	if (priv->irq <= 0)
+		return err;
+
+	err = device_create_file(dev, &dev_attr_alarm_mode);
+	if (err)
+		goto error3;
+
+	err = device_create_file(dev, &dev_attr_alarm_status);
+	if (!err)
+		return err;
+
+	device_remove_file(dev, &dev_attr_alarm_mode);
+
+error3:
+	device_remove_bin_file(dev, &nvram_attr);
+
+error2:
+	device_remove_file(dev, &dev_attr_trickle_charger);
+
+error1:
+	device_remove_file(dev, &dev_attr_glitch_filter);
+
+	return err;
+}
+
+static void ds1343_sysfs_unregister(struct device *dev)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+
+	device_remove_file(dev, &dev_attr_glitch_filter);
+	device_remove_file(dev, &dev_attr_trickle_charger);
+	device_remove_bin_file(dev, &nvram_attr);
+
+	if (priv->irq <= 0)
+		return;
+
+	device_remove_file(dev, &dev_attr_alarm_status);
+	device_remove_file(dev, &dev_attr_alarm_mode);
+}
+
+static int ds1343_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	unsigned char buf[7];
+	int res;
+
+	res = regmap_bulk_read(priv->map, DS1343_SECONDS_REG, buf, 7);
+	if (res)
+		return res;
+
+	dt->tm_sec	= bcd2bin(buf[0]);
+	dt->tm_min	= bcd2bin(buf[1]);
+	dt->tm_hour	= bcd2bin(buf[2] & 0x3F);
+	dt->tm_wday	= bcd2bin(buf[3]) - 1;
+	dt->tm_mday	= bcd2bin(buf[4]);
+	dt->tm_mon	= bcd2bin(buf[5] & 0x1F) - 1;
+	dt->tm_year	= bcd2bin(buf[6]) + 100; /* year offset from 1900 */
+
+	return rtc_valid_tm(dt);
+}
+
+static int ds1343_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int res;
+
+	res = regmap_write(priv->map, DS1343_SECONDS_REG,
+				bin2bcd(dt->tm_sec));
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_MINUTES_REG,
+				bin2bcd(dt->tm_min));
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_HOURS_REG,
+				bin2bcd(dt->tm_hour) & 0x3F);
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_DAY_REG,
+				bin2bcd(dt->tm_wday + 1));
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_DATE_REG,
+				bin2bcd(dt->tm_mday));
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_MONTH_REG,
+				bin2bcd(dt->tm_mon + 1));
+	if (res)
+		return res;
+
+	dt->tm_year %= 100;
+
+	res = regmap_write(priv->map, DS1343_YEAR_REG,
+				bin2bcd(dt->tm_year));
+	if (res)
+		return res;
+
+	return 0;
+}
+
+static int ds1343_update_alarm(struct device *dev)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	unsigned int control, stat;
+	unsigned char buf[4];
+	int res = 0;
+
+	res = regmap_read(priv->map, DS1343_CONTROL_REG, &control);
+	if (res)
+		return res;
+
+	res = regmap_read(priv->map, DS1343_STATUS_REG, &stat);
+	if (res)
+		return res;
+
+	control &= ~(DS1343_A0IE);
+	stat &= ~(DS1343_IRQF0);
+
+	res = regmap_write(priv->map, DS1343_CONTROL_REG, control);
+	if (res)
+		return res;
+
+	res = regmap_write(priv->map, DS1343_STATUS_REG, stat);
+	if (res)
+		return res;
+
+	buf[0] = priv->alarm_sec < 0 || (priv->irqen & RTC_UF) ?
+		0x80 : bin2bcd(priv->alarm_sec) & 0x7F;
+	buf[1] = priv->alarm_min < 0 || (priv->irqen & RTC_UF) ?
+		0x80 : bin2bcd(priv->alarm_min) & 0x7F;
+	buf[2] = priv->alarm_hour < 0 || (priv->irqen & RTC_UF) ?
+		0x80 : bin2bcd(priv->alarm_hour) & 0x3F;
+	buf[3] = priv->alarm_mday < 0 || (priv->irqen & RTC_UF) ?
+		0x80 : bin2bcd(priv->alarm_mday) & 0x7F;
+
+	res = regmap_bulk_write(priv->map, DS1343_ALM0_SEC_REG, buf, 4);
+	if (res)
+		return res;
+
+	if (priv->irqen) {
+		control |= DS1343_A0IE;
+		res = regmap_write(priv->map, DS1343_CONTROL_REG, control);
+	}
+
+	return res;
+}
+
+static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int res = 0;
+	unsigned int stat;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->mutex);
+
+	res = regmap_read(priv->map, DS1343_STATUS_REG, &stat);
+	if (res)
+		goto out;
+
+	alarm->enabled = !!(priv->irqen & RTC_AF);
+	alarm->pending = !!(stat & DS1343_IRQF0);
+
+	alarm->time.tm_sec = priv->alarm_sec < 0 ? 0 : priv->alarm_sec;
+	alarm->time.tm_min = priv->alarm_min < 0 ? 0 : priv->alarm_min;
+	alarm->time.tm_hour = priv->alarm_hour < 0 ? 0 : priv->alarm_hour;
+	alarm->time.tm_mday = priv->alarm_mday < 0 ? 0 : priv->alarm_mday;
+
+out:
+	mutex_unlock(&priv->mutex);
+	return res;
+}
+
+static int ds1343_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int res = 0;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->mutex);
+
+	priv->alarm_sec = alarm->time.tm_sec;
+	priv->alarm_min = alarm->time.tm_min;
+	priv->alarm_hour = alarm->time.tm_hour;
+	priv->alarm_mday = alarm->time.tm_mday;
+
+	if (alarm->enabled)
+		priv->irqen |= RTC_AF;
+
+	res = ds1343_update_alarm(dev);
+
+	mutex_unlock(&priv->mutex);
+
+	return res;
+}
+
+static int ds1343_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1343_priv *priv = dev_get_drvdata(dev);
+	int res = 0;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->mutex);
+
+	if (enabled)
+		priv->irqen |= RTC_AF;
+	else
+		priv->irqen &= ~RTC_AF;
+
+	res = ds1343_update_alarm(dev);
+
+	mutex_unlock(&priv->mutex);
+
+	return res;
+}
+
+static irqreturn_t ds1343_thread(int irq, void *dev_id)
+{
+	struct ds1343_priv *priv = dev_id;
+	unsigned int stat, control;
+	int res = 0;
+
+	mutex_lock(&priv->mutex);
+
+	res = regmap_read(priv->map, DS1343_STATUS_REG, &stat);
+	if (res)
+		goto out;
+
+	if (stat & DS1343_IRQF0) {
+		stat &= ~DS1343_IRQF0;
+		regmap_write(priv->map, DS1343_STATUS_REG, stat);
+
+		res = regmap_read(priv->map, DS1343_CONTROL_REG, &control);
+		if (res)
+			goto out;
+
+		control &= ~DS1343_A0IE;
+		regmap_write(priv->map, DS1343_CONTROL_REG, control);
+
+		rtc_update_irq(priv->rtc, 1, RTC_AF | RTC_IRQF);
+	}
+
+out:
+	mutex_unlock(&priv->mutex);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ds1343_rtc_ops = {
+	.ioctl		= ds1343_ioctl,
+	.read_time	= ds1343_read_time,
+	.set_time	= ds1343_set_time,
+	.read_alarm	= ds1343_read_alarm,
+	.set_alarm	= ds1343_set_alarm,
+	.alarm_irq_enable = ds1343_alarm_irq_enable,
+};
+
+static int ds1343_probe(struct spi_device *spi)
+{
+	struct ds1343_priv *priv;
+	struct regmap_config config;
+	unsigned int data;
+	int res;
+
+	memset(&config, 0, sizeof(config));
+	config.reg_bits = 8;
+	config.val_bits = 8;
+	config.write_flag_mask = 0x80;
+
+	priv = devm_kzalloc(&spi->dev, sizeof(struct ds1343_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->spi = spi;
+	mutex_init(&priv->mutex);
+
+	/* RTC DS1347 works in spi mode 3 and
+	 * its chip select is active high
+	 */
+	spi->mode = SPI_MODE_3 | SPI_CS_HIGH;
+	spi->bits_per_word = 8;
+	res = spi_setup(spi);
+	if (res)
+		return res;
+
+	spi_set_drvdata(spi, priv);
+
+	priv->map = devm_regmap_init_spi(spi, &config);
+
+	if (IS_ERR(priv->map)) {
+		dev_err(&spi->dev, "spi regmap init failed for rtc ds1343\n");
+		return PTR_ERR(priv->map);
+	}
+
+	res = regmap_read(priv->map, DS1343_SECONDS_REG, &data);
+	if (res)
+		return res;
+
+	regmap_read(priv->map, DS1343_CONTROL_REG, &data);
+	data |= DS1343_INTCN;
+	data &= ~(DS1343_EOSC | DS1343_A1IE | DS1343_A0IE);
+	regmap_write(priv->map, DS1343_CONTROL_REG, data);
+
+	regmap_read(priv->map, DS1343_STATUS_REG, &data);
+	data &= ~(DS1343_OSF | DS1343_IRQF1 | DS1343_IRQF0);
+	regmap_write(priv->map, DS1343_STATUS_REG, data);
+
+	priv->rtc = devm_rtc_device_register(&spi->dev, "ds1343",
+					&ds1343_rtc_ops, THIS_MODULE);
+	if (IS_ERR(priv->rtc)) {
+		dev_err(&spi->dev, "unable to register rtc ds1343\n");
+		return PTR_ERR(priv->rtc);
+	}
+
+	priv->irq = spi->irq;
+
+	if (priv->irq >= 0) {
+		res = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+						ds1343_thread, IRQF_ONESHOT,
+						"ds1343", priv);
+		if (res) {
+			priv->irq = -1;
+			dev_err(&spi->dev,
+				"unable to request irq for rtc ds1343\n");
+		} else {
+			device_init_wakeup(&spi->dev, true);
+			dev_pm_set_wake_irq(&spi->dev, spi->irq);
+		}
+	}
+
+	res = ds1343_sysfs_register(&spi->dev);
+	if (res)
+		dev_err(&spi->dev,
+			"unable to create sysfs entries for rtc ds1343\n");
+
+	return 0;
+}
+
+static int ds1343_remove(struct spi_device *spi)
+{
+	struct ds1343_priv *priv = spi_get_drvdata(spi);
+
+	if (spi->irq) {
+		mutex_lock(&priv->mutex);
+		priv->irqen &= ~RTC_AF;
+		mutex_unlock(&priv->mutex);
+
+		dev_pm_clear_wake_irq(&spi->dev);
+		device_init_wakeup(&spi->dev, false);
+		devm_free_irq(&spi->dev, spi->irq, priv);
+	}
+
+	spi_set_drvdata(spi, NULL);
+
+	ds1343_sysfs_unregister(&spi->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ds1343_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	if (spi->irq >= 0 && device_may_wakeup(dev))
+		enable_irq_wake(spi->irq);
+
+	return 0;
+}
+
+static int ds1343_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	if (spi->irq >= 0 && device_may_wakeup(dev))
+		disable_irq_wake(spi->irq);
+
+	return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(ds1343_pm, ds1343_suspend, ds1343_resume);
+
+static struct spi_driver ds1343_driver = {
+	.driver = {
+		.name = "ds1343",
+		.pm = &ds1343_pm,
+	},
+	.probe = ds1343_probe,
+	.remove = ds1343_remove,
+	.id_table = ds1343_id,
+};
+
+module_spi_driver(ds1343_driver);
+
+MODULE_DESCRIPTION("DS1343 RTC SPI Driver");
+MODULE_AUTHOR("Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>,"
+		"Ankur Srivastava <sankurece@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1347.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1347.c
new file mode 100644
index 0000000..ccfc9d4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1347.c
@@ -0,0 +1,175 @@
+/* rtc-ds1347.c
+ *
+ * Driver for Dallas Semiconductor DS1347 Low Current, SPI Compatible
+ * Real Time Clock
+ *
+ * Author : Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/regmap.h>
+
+/* Registers in ds1347 rtc */
+
+#define DS1347_SECONDS_REG	0x01
+#define DS1347_MINUTES_REG	0x03
+#define DS1347_HOURS_REG	0x05
+#define DS1347_DATE_REG		0x07
+#define DS1347_MONTH_REG	0x09
+#define DS1347_DAY_REG		0x0B
+#define DS1347_YEAR_REG		0x0D
+#define DS1347_CONTROL_REG	0x0F
+#define DS1347_STATUS_REG	0x17
+#define DS1347_CLOCK_BURST	0x3F
+
+static const struct regmap_range ds1347_ranges[] = {
+	{
+		.range_min = DS1347_SECONDS_REG,
+		.range_max = DS1347_STATUS_REG,
+	},
+};
+
+static const struct regmap_access_table ds1347_access_table = {
+	.yes_ranges = ds1347_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ds1347_ranges),
+};
+
+static int ds1347_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct regmap *map;
+	int err;
+	unsigned char buf[8];
+
+	map = spi_get_drvdata(spi);
+
+	err = regmap_bulk_read(map, DS1347_CLOCK_BURST, buf, 8);
+	if (err)
+		return err;
+
+	dt->tm_sec = bcd2bin(buf[0]);
+	dt->tm_min = bcd2bin(buf[1]);
+	dt->tm_hour = bcd2bin(buf[2] & 0x3F);
+	dt->tm_mday = bcd2bin(buf[3]);
+	dt->tm_mon = bcd2bin(buf[4]) - 1;
+	dt->tm_wday = bcd2bin(buf[5]) - 1;
+	dt->tm_year = bcd2bin(buf[6]) + 100;
+
+	return rtc_valid_tm(dt);
+}
+
+static int ds1347_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct regmap *map;
+	unsigned char buf[8];
+
+	map = spi_get_drvdata(spi);
+
+	buf[0] = bin2bcd(dt->tm_sec);
+	buf[1] = bin2bcd(dt->tm_min);
+	buf[2] = (bin2bcd(dt->tm_hour) & 0x3F);
+	buf[3] = bin2bcd(dt->tm_mday);
+	buf[4] = bin2bcd(dt->tm_mon + 1);
+	buf[5] = bin2bcd(dt->tm_wday + 1);
+
+	/* year in linux is from 1900 i.e in range of 100
+	in rtc it is from 00 to 99 */
+	dt->tm_year = dt->tm_year % 100;
+
+	buf[6] = bin2bcd(dt->tm_year);
+	buf[7] = bin2bcd(0x00);
+
+	/* write the rtc settings */
+	return regmap_bulk_write(map, DS1347_CLOCK_BURST, buf, 8);
+}
+
+static const struct rtc_class_ops ds1347_rtc_ops = {
+	.read_time = ds1347_read_time,
+	.set_time = ds1347_set_time,
+};
+
+static int ds1347_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	struct regmap_config config;
+	struct regmap *map;
+	unsigned int data;
+	int res;
+
+	memset(&config, 0, sizeof(config));
+	config.reg_bits = 8;
+	config.val_bits = 8;
+	config.read_flag_mask = 0x80;
+	config.max_register = 0x3F;
+	config.wr_table = &ds1347_access_table;
+
+	/* spi setup with ds1347 in mode 3 and bits per word as 8 */
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	map = devm_regmap_init_spi(spi, &config);
+
+	if (IS_ERR(map)) {
+		dev_err(&spi->dev, "ds1347 regmap init spi failed\n");
+		return PTR_ERR(map);
+	}
+
+	spi_set_drvdata(spi, map);
+
+	/* RTC Settings */
+	res = regmap_read(map, DS1347_SECONDS_REG, &data);
+	if (res)
+		return res;
+
+	/* Disable the write protect of rtc */
+	regmap_read(map, DS1347_CONTROL_REG, &data);
+	data = data & ~(1<<7);
+	regmap_write(map, DS1347_CONTROL_REG, data);
+
+	/* Enable the oscillator , disable the oscillator stop flag,
+	 and glitch filter to reduce current consumption */
+	regmap_read(map, DS1347_STATUS_REG, &data);
+	data = data & 0x1B;
+	regmap_write(map, DS1347_STATUS_REG, data);
+
+	/* display the settings */
+	regmap_read(map, DS1347_CONTROL_REG, &data);
+	dev_info(&spi->dev, "DS1347 RTC CTRL Reg = 0x%02x\n", data);
+
+	regmap_read(map, DS1347_STATUS_REG, &data);
+	dev_info(&spi->dev, "DS1347 RTC Status Reg = 0x%02x\n", data);
+
+	rtc = devm_rtc_device_register(&spi->dev, "ds1347",
+				&ds1347_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	return 0;
+}
+
+static struct spi_driver ds1347_driver = {
+	.driver = {
+		.name = "ds1347",
+	},
+	.probe = ds1347_probe,
+};
+
+module_spi_driver(ds1347_driver);
+
+MODULE_DESCRIPTION("DS1347 SPI RTC DRIVER");
+MODULE_AUTHOR("Raghavendra C Ganiga <ravi23ganiga@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1374.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1374.c
new file mode 100644
index 0000000..77a106e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1374.c
@@ -0,0 +1,728 @@
+/*
+ * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
+ *
+ * Based on code by Randy Vinson <rvinson@mvista.com>,
+ * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>.
+ *
+ * Copyright (C) 2014 Rose Technology
+ * Copyright (C) 2006-2007 Freescale Semiconductor
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+/*
+ * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
+ * recommened in .../Documentation/i2c/writing-clients section
+ * "Sending and receiving", using SMBus level communication is preferred.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/miscdevice.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+#endif
+
+#define DS1374_REG_TOD0		0x00 /* Time of Day */
+#define DS1374_REG_TOD1		0x01
+#define DS1374_REG_TOD2		0x02
+#define DS1374_REG_TOD3		0x03
+#define DS1374_REG_WDALM0	0x04 /* Watchdog/Alarm */
+#define DS1374_REG_WDALM1	0x05
+#define DS1374_REG_WDALM2	0x06
+#define DS1374_REG_CR		0x07 /* Control */
+#define DS1374_REG_CR_AIE	0x01 /* Alarm Int. Enable */
+#define DS1374_REG_CR_WDALM	0x20 /* 1=Watchdog, 0=Alarm */
+#define DS1374_REG_CR_WACE	0x40 /* WD/Alarm counter enable */
+#define DS1374_REG_SR		0x08 /* Status */
+#define DS1374_REG_SR_OSF	0x80 /* Oscillator Stop Flag */
+#define DS1374_REG_SR_AF	0x01 /* Alarm Flag */
+#define DS1374_REG_TCR		0x09 /* Trickle Charge */
+
+static const struct i2c_device_id ds1374_id[] = {
+	{ "ds1374", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds1374_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1374_of_match[] = {
+	{ .compatible = "dallas,ds1374" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds1374_of_match);
+#endif
+
+struct ds1374 {
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+	struct work_struct work;
+
+	/* The mutex protects alarm operations, and prevents a race
+	 * between the enable_irq() in the workqueue and the free_irq()
+	 * in the remove function.
+	 */
+	struct mutex mutex;
+	int exiting;
+};
+
+static struct i2c_driver ds1374_driver;
+
+static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
+			   int reg, int nbytes)
+{
+	u8 buf[4];
+	int ret;
+	int i;
+
+	if (WARN_ON(nbytes > 4))
+		return -EINVAL;
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
+
+	if (ret < 0)
+		return ret;
+	if (ret < nbytes)
+		return -EIO;
+
+	for (i = nbytes - 1, *time = 0; i >= 0; i--)
+		*time = (*time << 8) | buf[i];
+
+	return 0;
+}
+
+static int ds1374_write_rtc(struct i2c_client *client, u32 time,
+			    int reg, int nbytes)
+{
+	u8 buf[4];
+	int i;
+
+	if (nbytes > 4) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < nbytes; i++) {
+		buf[i] = time & 0xff;
+		time >>= 8;
+	}
+
+	return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
+}
+
+static int ds1374_check_rtc_status(struct i2c_client *client)
+{
+	int ret = 0;
+	int control, stat;
+
+	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
+	if (stat < 0)
+		return stat;
+
+	if (stat & DS1374_REG_SR_OSF)
+		dev_warn(&client->dev,
+			 "oscillator discontinuity flagged, time unreliable\n");
+
+	stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
+
+	ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
+	if (ret < 0)
+		return ret;
+
+	/* If the alarm is pending, clear it before requesting
+	 * the interrupt, so an interrupt event isn't reported
+	 * before everything is initialized.
+	 */
+
+	control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+	if (control < 0)
+		return control;
+
+	control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
+	return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
+}
+
+static int ds1374_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u32 itime;
+	int ret;
+
+	ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
+	if (!ret)
+		rtc_time_to_tm(itime, time);
+
+	return ret;
+}
+
+static int ds1374_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long itime;
+
+	rtc_tm_to_time(time, &itime);
+	return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
+}
+
+#ifndef CONFIG_RTC_DRV_DS1374_WDT
+/* The ds1374 has a decrementer for an alarm, rather than a comparator.
+ * If the time of day is changed, then the alarm will need to be
+ * reset.
+ */
+static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1374 *ds1374 = i2c_get_clientdata(client);
+	u32 now, cur_alarm;
+	int cr, sr;
+	int ret = 0;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	mutex_lock(&ds1374->mutex);
+
+	cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+	if (ret < 0)
+		goto out;
+
+	sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
+	if (ret < 0)
+		goto out;
+
+	ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
+	if (ret)
+		goto out;
+
+	ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
+	if (ret)
+		goto out;
+
+	rtc_time_to_tm(now + cur_alarm, &alarm->time);
+	alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
+	alarm->pending = !!(sr & DS1374_REG_SR_AF);
+
+out:
+	mutex_unlock(&ds1374->mutex);
+	return ret;
+}
+
+static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1374 *ds1374 = i2c_get_clientdata(client);
+	struct rtc_time now;
+	unsigned long new_alarm, itime;
+	int cr;
+	int ret = 0;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	ret = ds1374_read_time(dev, &now);
+	if (ret < 0)
+		return ret;
+
+	rtc_tm_to_time(&alarm->time, &new_alarm);
+	rtc_tm_to_time(&now, &itime);
+
+	/* This can happen due to races, in addition to dates that are
+	 * truly in the past.  To avoid requiring the caller to check for
+	 * races, dates in the past are assumed to be in the recent past
+	 * (i.e. not something that we'd rather the caller know about via
+	 * an error), and the alarm is set to go off as soon as possible.
+	 */
+	if (time_before_eq(new_alarm, itime))
+		new_alarm = 1;
+	else
+		new_alarm -= itime;
+
+	mutex_lock(&ds1374->mutex);
+
+	ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+	if (ret < 0)
+		goto out;
+
+	/* Disable any existing alarm before setting the new one
+	 * (or lack thereof). */
+	cr &= ~DS1374_REG_CR_WACE;
+
+	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
+	if (ret < 0)
+		goto out;
+
+	ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
+	if (ret)
+		goto out;
+
+	if (alarm->enabled) {
+		cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
+		cr &= ~DS1374_REG_CR_WDALM;
+
+		ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
+	}
+
+out:
+	mutex_unlock(&ds1374->mutex);
+	return ret;
+}
+#endif
+
+static irqreturn_t ds1374_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct ds1374 *ds1374 = i2c_get_clientdata(client);
+
+	disable_irq_nosync(irq);
+	schedule_work(&ds1374->work);
+	return IRQ_HANDLED;
+}
+
+static void ds1374_work(struct work_struct *work)
+{
+	struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
+	struct i2c_client *client = ds1374->client;
+	int stat, control;
+
+	mutex_lock(&ds1374->mutex);
+
+	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
+	if (stat < 0)
+		goto unlock;
+
+	if (stat & DS1374_REG_SR_AF) {
+		stat &= ~DS1374_REG_SR_AF;
+		i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
+
+		control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+		if (control < 0)
+			goto out;
+
+		control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
+		i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
+
+		rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
+	}
+
+out:
+	if (!ds1374->exiting)
+		enable_irq(client->irq);
+unlock:
+	mutex_unlock(&ds1374->mutex);
+}
+
+#ifndef CONFIG_RTC_DRV_DS1374_WDT
+static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1374 *ds1374 = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&ds1374->mutex);
+
+	ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+	if (ret < 0)
+		goto out;
+
+	if (enabled) {
+		ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
+		ret &= ~DS1374_REG_CR_WDALM;
+	} else {
+		ret &= ~DS1374_REG_CR_WACE;
+	}
+	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
+
+out:
+	mutex_unlock(&ds1374->mutex);
+	return ret;
+}
+#endif
+
+static const struct rtc_class_ops ds1374_rtc_ops = {
+	.read_time = ds1374_read_time,
+	.set_time = ds1374_set_time,
+#ifndef CONFIG_RTC_DRV_DS1374_WDT
+	.read_alarm = ds1374_read_alarm,
+	.set_alarm = ds1374_set_alarm,
+	.alarm_irq_enable = ds1374_alarm_irq_enable,
+#endif
+};
+
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+/*
+ *****************************************************************************
+ *
+ * Watchdog Driver
+ *
+ *****************************************************************************
+ */
+static struct i2c_client *save_client;
+/* Default margin */
+#define WD_TIMO 131762
+
+#define DRV_NAME "DS1374 Watchdog"
+
+static int wdt_margin = WD_TIMO;
+static unsigned long wdt_is_open;
+module_param(wdt_margin, int, 0);
+MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)");
+
+static const struct watchdog_info ds1374_wdt_info = {
+	.identity       = "DS1374 WTD",
+	.options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+};
+
+static int ds1374_wdt_settimeout(unsigned int timeout)
+{
+	int ret = -ENOIOCTLCMD;
+	int cr;
+
+	ret = cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
+	if (ret < 0)
+		goto out;
+
+	/* Disable any existing watchdog/alarm before setting the new one */
+	cr &= ~DS1374_REG_CR_WACE;
+
+	ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
+	if (ret < 0)
+		goto out;
+
+	/* Set new watchdog time */
+	ret = ds1374_write_rtc(save_client, timeout, DS1374_REG_WDALM0, 3);
+	if (ret) {
+		pr_info("couldn't set new watchdog time\n");
+		goto out;
+	}
+
+	/* Enable watchdog timer */
+	cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
+	cr &= ~DS1374_REG_CR_AIE;
+
+	ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+out:
+	return ret;
+}
+
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static void ds1374_wdt_ping(void)
+{
+	u32 val;
+	int ret = 0;
+
+	ret = ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3);
+	if (ret)
+		pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret);
+}
+
+static void ds1374_wdt_disable(void)
+{
+	int ret = -ENOIOCTLCMD;
+	int cr;
+
+	cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
+	/* Disable watchdog timer */
+	cr &= ~DS1374_REG_CR_WACE;
+
+	ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
+}
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int ds1374_wdt_open(struct inode *inode, struct file *file)
+{
+	struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
+
+	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
+		mutex_lock(&ds1374->mutex);
+		if (test_and_set_bit(0, &wdt_is_open)) {
+			mutex_unlock(&ds1374->mutex);
+			return -EBUSY;
+		}
+		/*
+		 *      Activate
+		 */
+		wdt_is_open = 1;
+		mutex_unlock(&ds1374->mutex);
+		return nonseekable_open(inode, file);
+	}
+	return -ENODEV;
+}
+
+/*
+ * Close the watchdog device.
+ */
+static int ds1374_wdt_release(struct inode *inode, struct file *file)
+{
+	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
+		clear_bit(0, &wdt_is_open);
+
+	return 0;
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t ds1374_wdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		ds1374_wdt_ping();
+		return 1;
+	}
+	return 0;
+}
+
+static ssize_t ds1374_wdt_read(struct file *file, char __user *data,
+				size_t len, loff_t *ppos)
+{
+	return 0;
+}
+
+/*
+ * Handle commands from user-space.
+ */
+static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int new_margin, options;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((struct watchdog_info __user *)arg,
+		&ds1374_wdt_info, sizeof(ds1374_wdt_info)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int __user *)arg);
+	case WDIOC_KEEPALIVE:
+		ds1374_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, (int __user *)arg))
+			return -EFAULT;
+
+		/* the hardware's tick rate is 4096 Hz, so
+		 * the counter value needs to be scaled accordingly
+		 */
+		new_margin <<= 12;
+		if (new_margin < 1 || new_margin > 16777216)
+			return -EINVAL;
+
+		wdt_margin = new_margin;
+		ds1374_wdt_settimeout(new_margin);
+		ds1374_wdt_ping();
+		/* fallthrough */
+	case WDIOC_GETTIMEOUT:
+		/* when returning ... inverse is true */
+		return put_user((wdt_margin >> 12), (int __user *)arg);
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			pr_info("disable watchdog\n");
+			ds1374_wdt_disable();
+			return 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			pr_info("enable watchdog\n");
+			ds1374_wdt_settimeout(wdt_margin);
+			ds1374_wdt_ping();
+			return 0;
+		}
+		return -EINVAL;
+	}
+	return -ENOTTY;
+}
+
+static long ds1374_wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	int ret;
+	struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
+
+	mutex_lock(&ds1374->mutex);
+	ret = ds1374_wdt_ioctl(file, cmd, arg);
+	mutex_unlock(&ds1374->mutex);
+
+	return ret;
+}
+
+static int ds1374_wdt_notify_sys(struct notifier_block *this,
+			unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		/* Disable Watchdog */
+		ds1374_wdt_disable();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations ds1374_wdt_fops = {
+	.owner			= THIS_MODULE,
+	.read			= ds1374_wdt_read,
+	.unlocked_ioctl		= ds1374_wdt_unlocked_ioctl,
+	.write			= ds1374_wdt_write,
+	.open                   = ds1374_wdt_open,
+	.release                = ds1374_wdt_release,
+	.llseek			= no_llseek,
+};
+
+static struct miscdevice ds1374_miscdev = {
+	.minor          = WATCHDOG_MINOR,
+	.name           = "watchdog",
+	.fops           = &ds1374_wdt_fops,
+};
+
+static struct notifier_block ds1374_wdt_notifier = {
+	.notifier_call = ds1374_wdt_notify_sys,
+};
+
+#endif /*CONFIG_RTC_DRV_DS1374_WDT*/
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface
+ *
+ *****************************************************************************
+ */
+static int ds1374_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ds1374 *ds1374;
+	int ret;
+
+	ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
+	if (!ds1374)
+		return -ENOMEM;
+
+	ds1374->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(ds1374->rtc))
+		return PTR_ERR(ds1374->rtc);
+
+	ds1374->client = client;
+	i2c_set_clientdata(client, ds1374);
+
+	INIT_WORK(&ds1374->work, ds1374_work);
+	mutex_init(&ds1374->mutex);
+
+	ret = ds1374_check_rtc_status(client);
+	if (ret)
+		return ret;
+
+	if (client->irq > 0) {
+		ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
+					"ds1374", client);
+		if (ret) {
+			dev_err(&client->dev, "unable to request IRQ\n");
+			return ret;
+		}
+
+		device_set_wakeup_capable(&client->dev, 1);
+	}
+
+	ds1374->rtc->ops = &ds1374_rtc_ops;
+
+	ret = rtc_register_device(ds1374->rtc);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+	save_client = client;
+	ret = misc_register(&ds1374_miscdev);
+	if (ret)
+		return ret;
+	ret = register_reboot_notifier(&ds1374_wdt_notifier);
+	if (ret) {
+		misc_deregister(&ds1374_miscdev);
+		return ret;
+	}
+	ds1374_wdt_settimeout(131072);
+#endif
+
+	return 0;
+}
+
+static int ds1374_remove(struct i2c_client *client)
+{
+	struct ds1374 *ds1374 = i2c_get_clientdata(client);
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+	misc_deregister(&ds1374_miscdev);
+	ds1374_miscdev.parent = NULL;
+	unregister_reboot_notifier(&ds1374_wdt_notifier);
+#endif
+
+	if (client->irq > 0) {
+		mutex_lock(&ds1374->mutex);
+		ds1374->exiting = 1;
+		mutex_unlock(&ds1374->mutex);
+
+		devm_free_irq(&client->dev, client->irq, client);
+		cancel_work_sync(&ds1374->work);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ds1374_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq > 0 && device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	return 0;
+}
+
+static int ds1374_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq > 0 && device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
+
+static struct i2c_driver ds1374_driver = {
+	.driver = {
+		.name = "rtc-ds1374",
+		.of_match_table = of_match_ptr(ds1374_of_match),
+		.pm = &ds1374_pm,
+	},
+	.probe = ds1374_probe,
+	.remove = ds1374_remove,
+	.id_table = ds1374_id,
+};
+
+module_i2c_driver(ds1374_driver);
+
+MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1390.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1390.c
new file mode 100644
index 0000000..aa0d2c6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1390.c
@@ -0,0 +1,231 @@
+/*
+ * rtc-ds1390.c -- driver for the Dallas/Maxim DS1390/93/94 SPI RTC
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ * Written by Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE: Currently this driver only supports the bare minimum for read
+ * and write the RTC. The extra features provided by the chip family
+ * (alarms, trickle charger, different control registers) are unavailable.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define DS1390_REG_100THS		0x00
+#define DS1390_REG_SECONDS		0x01
+#define DS1390_REG_MINUTES		0x02
+#define DS1390_REG_HOURS		0x03
+#define DS1390_REG_DAY			0x04
+#define DS1390_REG_DATE			0x05
+#define DS1390_REG_MONTH_CENT		0x06
+#define DS1390_REG_YEAR			0x07
+
+#define DS1390_REG_ALARM_100THS		0x08
+#define DS1390_REG_ALARM_SECONDS	0x09
+#define DS1390_REG_ALARM_MINUTES	0x0A
+#define DS1390_REG_ALARM_HOURS		0x0B
+#define DS1390_REG_ALARM_DAY_DATE	0x0C
+
+#define DS1390_REG_CONTROL		0x0D
+#define DS1390_REG_STATUS		0x0E
+#define DS1390_REG_TRICKLE		0x0F
+
+#define DS1390_TRICKLE_CHARGER_ENABLE	0xA0
+#define DS1390_TRICKLE_CHARGER_250_OHM	0x01
+#define DS1390_TRICKLE_CHARGER_2K_OHM	0x02
+#define DS1390_TRICKLE_CHARGER_4K_OHM	0x03
+#define DS1390_TRICKLE_CHARGER_NO_DIODE	0x04
+#define DS1390_TRICKLE_CHARGER_DIODE	0x08
+
+struct ds1390 {
+	struct rtc_device *rtc;
+	u8 txrx_buf[9];	/* cmd + 8 registers */
+};
+
+static void ds1390_set_reg(struct device *dev, unsigned char address,
+			   unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	/* MSB must be '1' to write */
+	buf[0] = address | 0x80;
+	buf[1] = data;
+
+	spi_write(spi, buf, 2);
+}
+
+static int ds1390_get_reg(struct device *dev, unsigned char address,
+				unsigned char *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ds1390 *chip = dev_get_drvdata(dev);
+	int status;
+
+	if (!data)
+		return -EINVAL;
+
+	/* Clear MSB to indicate read */
+	chip->txrx_buf[0] = address & 0x7f;
+	/* do the i/o */
+	status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1);
+	if (status != 0)
+		return status;
+
+	*data = chip->txrx_buf[0];
+
+	return 0;
+}
+
+static void ds1390_trickle_of_init(struct spi_device *spi)
+{
+	u32 ohms = 0;
+	u8 value;
+
+	if (of_property_read_u32(spi->dev.of_node, "trickle-resistor-ohms",
+				 &ohms))
+		goto out;
+
+	/* Enable charger */
+	value = DS1390_TRICKLE_CHARGER_ENABLE;
+	if (of_property_read_bool(spi->dev.of_node, "trickle-diode-disable"))
+		value |= DS1390_TRICKLE_CHARGER_NO_DIODE;
+	else
+		value |= DS1390_TRICKLE_CHARGER_DIODE;
+
+	/* Resistor select */
+	switch (ohms) {
+	case 250:
+		value |= DS1390_TRICKLE_CHARGER_250_OHM;
+		break;
+	case 2000:
+		value |= DS1390_TRICKLE_CHARGER_2K_OHM;
+		break;
+	case 4000:
+		value |= DS1390_TRICKLE_CHARGER_4K_OHM;
+		break;
+	default:
+		dev_warn(&spi->dev,
+			 "Unsupported ohm value %02ux in dt\n", ohms);
+		return;
+	}
+
+	ds1390_set_reg(&spi->dev, DS1390_REG_TRICKLE, value);
+
+out:
+	return;
+}
+
+static int ds1390_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ds1390 *chip = dev_get_drvdata(dev);
+	int status;
+
+	/* build the message */
+	chip->txrx_buf[0] = DS1390_REG_SECONDS;
+
+	/* do the i/o */
+	status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8);
+	if (status != 0)
+		return status;
+
+	/* The chip sends data in this order:
+	 * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */
+	dt->tm_sec	= bcd2bin(chip->txrx_buf[0]);
+	dt->tm_min	= bcd2bin(chip->txrx_buf[1]);
+	dt->tm_hour	= bcd2bin(chip->txrx_buf[2]);
+	dt->tm_wday	= bcd2bin(chip->txrx_buf[3]);
+	dt->tm_mday	= bcd2bin(chip->txrx_buf[4]);
+	/* mask off century bit */
+	dt->tm_mon	= bcd2bin(chip->txrx_buf[5] & 0x7f) - 1;
+	/* adjust for century bit */
+	dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0);
+
+	return rtc_valid_tm(dt);
+}
+
+static int ds1390_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ds1390 *chip = dev_get_drvdata(dev);
+
+	/* build the message */
+	chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80;
+	chip->txrx_buf[1] = bin2bcd(dt->tm_sec);
+	chip->txrx_buf[2] = bin2bcd(dt->tm_min);
+	chip->txrx_buf[3] = bin2bcd(dt->tm_hour);
+	chip->txrx_buf[4] = bin2bcd(dt->tm_wday);
+	chip->txrx_buf[5] = bin2bcd(dt->tm_mday);
+	chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) |
+				((dt->tm_year > 99) ? 0x80 : 0x00);
+	chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100);
+
+	/* do the i/o */
+	return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0);
+}
+
+static const struct rtc_class_ops ds1390_rtc_ops = {
+	.read_time	= ds1390_read_time,
+	.set_time	= ds1390_set_time,
+};
+
+static int ds1390_probe(struct spi_device *spi)
+{
+	unsigned char tmp;
+	struct ds1390 *chip;
+	int res;
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	chip = devm_kzalloc(&spi->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, chip);
+
+	res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp);
+	if (res != 0) {
+		dev_err(&spi->dev, "unable to read device\n");
+		return res;
+	}
+
+	if (spi->dev.of_node)
+		ds1390_trickle_of_init(spi);
+
+	chip->rtc = devm_rtc_device_register(&spi->dev, "ds1390",
+					&ds1390_rtc_ops, THIS_MODULE);
+	if (IS_ERR(chip->rtc)) {
+		dev_err(&spi->dev, "unable to register device\n");
+		res = PTR_ERR(chip->rtc);
+	}
+
+	return res;
+}
+
+static struct spi_driver ds1390_driver = {
+	.driver = {
+		.name	= "rtc-ds1390",
+	},
+	.probe	= ds1390_probe,
+};
+
+module_spi_driver(ds1390_driver);
+
+MODULE_DESCRIPTION("Dallas/Maxim DS1390/93/94 SPI RTC driver");
+MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-ds1390");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1511.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1511.c
new file mode 100644
index 0000000..1b2dcb5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1511.c
@@ -0,0 +1,537 @@
+/*
+ * An rtc driver for the Dallas DS1511
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Real time clock driver for the Dallas 1511 chip, which also
+ * contains a watchdog timer.  There is a tiny amount of code that
+ * platform code could use to mess with the watchdog device a little
+ * bit, but not a full watchdog driver.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+enum ds1511reg {
+	DS1511_SEC = 0x0,
+	DS1511_MIN = 0x1,
+	DS1511_HOUR = 0x2,
+	DS1511_DOW = 0x3,
+	DS1511_DOM = 0x4,
+	DS1511_MONTH = 0x5,
+	DS1511_YEAR = 0x6,
+	DS1511_CENTURY = 0x7,
+	DS1511_AM1_SEC = 0x8,
+	DS1511_AM2_MIN = 0x9,
+	DS1511_AM3_HOUR = 0xa,
+	DS1511_AM4_DATE = 0xb,
+	DS1511_WD_MSEC = 0xc,
+	DS1511_WD_SEC = 0xd,
+	DS1511_CONTROL_A = 0xe,
+	DS1511_CONTROL_B = 0xf,
+	DS1511_RAMADDR_LSB = 0x10,
+	DS1511_RAMDATA = 0x13
+};
+
+#define DS1511_BLF1	0x80
+#define DS1511_BLF2	0x40
+#define DS1511_PRS	0x20
+#define DS1511_PAB	0x10
+#define DS1511_TDF	0x08
+#define DS1511_KSF	0x04
+#define DS1511_WDF	0x02
+#define DS1511_IRQF	0x01
+#define DS1511_TE	0x80
+#define DS1511_CS	0x40
+#define DS1511_BME	0x20
+#define DS1511_TPE	0x10
+#define DS1511_TIE	0x08
+#define DS1511_KIE	0x04
+#define DS1511_WDE	0x02
+#define DS1511_WDS	0x01
+#define DS1511_RAM_MAX	0x100
+
+#define RTC_CMD		DS1511_CONTROL_B
+#define RTC_CMD1	DS1511_CONTROL_A
+
+#define RTC_ALARM_SEC	DS1511_AM1_SEC
+#define RTC_ALARM_MIN	DS1511_AM2_MIN
+#define RTC_ALARM_HOUR	DS1511_AM3_HOUR
+#define RTC_ALARM_DATE	DS1511_AM4_DATE
+
+#define RTC_SEC		DS1511_SEC
+#define RTC_MIN		DS1511_MIN
+#define RTC_HOUR	DS1511_HOUR
+#define RTC_DOW		DS1511_DOW
+#define RTC_DOM		DS1511_DOM
+#define RTC_MON		DS1511_MONTH
+#define RTC_YEAR	DS1511_YEAR
+#define RTC_CENTURY	DS1511_CENTURY
+
+#define RTC_TIE	DS1511_TIE
+#define RTC_TE	DS1511_TE
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;		/* virtual base address */
+	int irq;
+	unsigned int irqen;
+	int alrm_sec;
+	int alrm_min;
+	int alrm_hour;
+	int alrm_mday;
+	spinlock_t lock;
+};
+
+static DEFINE_SPINLOCK(ds1511_lock);
+
+static __iomem char *ds1511_base;
+static u32 reg_spacing = 1;
+
+static noinline void
+rtc_write(uint8_t val, uint32_t reg)
+{
+	writeb(val, ds1511_base + (reg * reg_spacing));
+}
+
+static inline void
+rtc_write_alarm(uint8_t val, enum ds1511reg reg)
+{
+	rtc_write((val | 0x80), reg);
+}
+
+static noinline uint8_t
+rtc_read(enum ds1511reg reg)
+{
+	return readb(ds1511_base + (reg * reg_spacing));
+}
+
+static inline void
+rtc_disable_update(void)
+{
+	rtc_write((rtc_read(RTC_CMD) & ~RTC_TE), RTC_CMD);
+}
+
+static void
+rtc_enable_update(void)
+{
+	rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD);
+}
+
+/*
+ * #define DS1511_WDOG_RESET_SUPPORT
+ *
+ * Uncomment this if you want to use these routines in
+ * some platform code.
+ */
+#ifdef DS1511_WDOG_RESET_SUPPORT
+/*
+ * just enough code to set the watchdog timer so that it
+ * will reboot the system
+ */
+void
+ds1511_wdog_set(unsigned long deciseconds)
+{
+	/*
+	 * the wdog timer can take 99.99 seconds
+	 */
+	deciseconds %= 10000;
+	/*
+	 * set the wdog values in the wdog registers
+	 */
+	rtc_write(bin2bcd(deciseconds % 100), DS1511_WD_MSEC);
+	rtc_write(bin2bcd(deciseconds / 100), DS1511_WD_SEC);
+	/*
+	 * set wdog enable and wdog 'steering' bit to issue a reset
+	 */
+	rtc_write(rtc_read(RTC_CMD) | DS1511_WDE | DS1511_WDS, RTC_CMD);
+}
+
+void
+ds1511_wdog_disable(void)
+{
+	/*
+	 * clear wdog enable and wdog 'steering' bits
+	 */
+	rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD);
+	/*
+	 * clear the wdog counter
+	 */
+	rtc_write(0, DS1511_WD_MSEC);
+	rtc_write(0, DS1511_WD_SEC);
+}
+#endif
+
+/*
+ * set the rtc chip's idea of the time.
+ * stupidly, some callers call with year unmolested;
+ * and some call with  year = year - 1900.  thanks.
+ */
+static int ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	u8 mon, day, dow, hrs, min, sec, yrs, cen;
+	unsigned long flags;
+
+	/*
+	 * won't have to change this for a while
+	 */
+	if (rtc_tm->tm_year < 1900)
+		rtc_tm->tm_year += 1900;
+
+	if (rtc_tm->tm_year < 1970)
+		return -EINVAL;
+
+	yrs = rtc_tm->tm_year % 100;
+	cen = rtc_tm->tm_year / 100;
+	mon = rtc_tm->tm_mon + 1;   /* tm_mon starts at zero */
+	day = rtc_tm->tm_mday;
+	dow = rtc_tm->tm_wday & 0x7; /* automatic BCD */
+	hrs = rtc_tm->tm_hour;
+	min = rtc_tm->tm_min;
+	sec = rtc_tm->tm_sec;
+
+	if ((mon > 12) || (day == 0))
+		return -EINVAL;
+
+	if (day > rtc_month_days(rtc_tm->tm_mon, rtc_tm->tm_year))
+		return -EINVAL;
+
+	if ((hrs >= 24) || (min >= 60) || (sec >= 60))
+		return -EINVAL;
+
+	/*
+	 * each register is a different number of valid bits
+	 */
+	sec = bin2bcd(sec) & 0x7f;
+	min = bin2bcd(min) & 0x7f;
+	hrs = bin2bcd(hrs) & 0x3f;
+	day = bin2bcd(day) & 0x3f;
+	mon = bin2bcd(mon) & 0x1f;
+	yrs = bin2bcd(yrs) & 0xff;
+	cen = bin2bcd(cen) & 0xff;
+
+	spin_lock_irqsave(&ds1511_lock, flags);
+	rtc_disable_update();
+	rtc_write(cen, RTC_CENTURY);
+	rtc_write(yrs, RTC_YEAR);
+	rtc_write((rtc_read(RTC_MON) & 0xe0) | mon, RTC_MON);
+	rtc_write(day, RTC_DOM);
+	rtc_write(hrs, RTC_HOUR);
+	rtc_write(min, RTC_MIN);
+	rtc_write(sec, RTC_SEC);
+	rtc_write(dow, RTC_DOW);
+	rtc_enable_update();
+	spin_unlock_irqrestore(&ds1511_lock, flags);
+
+	return 0;
+}
+
+static int ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm)
+{
+	unsigned int century;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ds1511_lock, flags);
+	rtc_disable_update();
+
+	rtc_tm->tm_sec = rtc_read(RTC_SEC) & 0x7f;
+	rtc_tm->tm_min = rtc_read(RTC_MIN) & 0x7f;
+	rtc_tm->tm_hour = rtc_read(RTC_HOUR) & 0x3f;
+	rtc_tm->tm_mday = rtc_read(RTC_DOM) & 0x3f;
+	rtc_tm->tm_wday = rtc_read(RTC_DOW) & 0x7;
+	rtc_tm->tm_mon = rtc_read(RTC_MON) & 0x1f;
+	rtc_tm->tm_year = rtc_read(RTC_YEAR) & 0x7f;
+	century = rtc_read(RTC_CENTURY);
+
+	rtc_enable_update();
+	spin_unlock_irqrestore(&ds1511_lock, flags);
+
+	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
+	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
+	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
+	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
+	rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday);
+	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
+	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
+	century = bcd2bin(century) * 100;
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	century += rtc_tm->tm_year;
+	rtc_tm->tm_year = century - 1900;
+
+	rtc_tm->tm_mon--;
+
+	if (rtc_valid_tm(rtc_tm) < 0) {
+		dev_err(dev, "retrieved date/time is not valid.\n");
+		rtc_time_to_tm(0, rtc_tm);
+	}
+	return 0;
+}
+
+/*
+ * write the alarm register settings
+ *
+ * we only have the use to interrupt every second, otherwise
+ * known as the update interrupt, or the interrupt if the whole
+ * date/hours/mins/secs matches.  the ds1511 has many more
+ * permutations, but the kernel doesn't.
+ */
+static void
+ds1511_rtc_update_alarm(struct rtc_plat_data *pdata)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->lock, flags);
+	rtc_write(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_mday) & 0x3f,
+	       RTC_ALARM_DATE);
+	rtc_write(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_hour) & 0x3f,
+	       RTC_ALARM_HOUR);
+	rtc_write(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_min) & 0x7f,
+	       RTC_ALARM_MIN);
+	rtc_write(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_sec) & 0x7f,
+	       RTC_ALARM_SEC);
+	rtc_write(rtc_read(RTC_CMD) | (pdata->irqen ? RTC_TIE : 0), RTC_CMD);
+	rtc_read(RTC_CMD1);	/* clear interrupts */
+	spin_unlock_irqrestore(&pdata->lock, flags);
+}
+
+static int
+ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+
+	pdata->alrm_mday = alrm->time.tm_mday;
+	pdata->alrm_hour = alrm->time.tm_hour;
+	pdata->alrm_min = alrm->time.tm_min;
+	pdata->alrm_sec = alrm->time.tm_sec;
+	if (alrm->enabled)
+		pdata->irqen |= RTC_AF;
+
+	ds1511_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static int
+ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+
+	alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
+	alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
+	alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
+	alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec;
+	alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0;
+	return 0;
+}
+
+static irqreturn_t
+ds1511_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	unsigned long events = 0;
+
+	spin_lock(&pdata->lock);
+	/*
+	 * read and clear interrupt
+	 */
+	if (rtc_read(RTC_CMD1) & DS1511_IRQF) {
+		events = RTC_IRQF;
+		if (rtc_read(RTC_ALARM_SEC) & 0x80)
+			events |= RTC_UF;
+		else
+			events |= RTC_AF;
+		rtc_update_irq(pdata->rtc, 1, events);
+	}
+	spin_unlock(&pdata->lock);
+	return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int ds1511_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	if (enabled)
+		pdata->irqen |= RTC_AF;
+	else
+		pdata->irqen &= ~RTC_AF;
+	ds1511_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static const struct rtc_class_ops ds1511_rtc_ops = {
+	.read_time		= ds1511_rtc_read_time,
+	.set_time		= ds1511_rtc_set_time,
+	.read_alarm		= ds1511_rtc_read_alarm,
+	.set_alarm		= ds1511_rtc_set_alarm,
+	.alarm_irq_enable	= ds1511_rtc_alarm_irq_enable,
+};
+
+static ssize_t
+ds1511_nvram_read(struct file *filp, struct kobject *kobj,
+		  struct bin_attribute *ba,
+		  char *buf, loff_t pos, size_t size)
+{
+	ssize_t count;
+
+	rtc_write(pos, DS1511_RAMADDR_LSB);
+	for (count = 0; count < size; count++)
+		*buf++ = rtc_read(DS1511_RAMDATA);
+
+	return count;
+}
+
+static ssize_t
+ds1511_nvram_write(struct file *filp, struct kobject *kobj,
+		   struct bin_attribute *bin_attr,
+		   char *buf, loff_t pos, size_t size)
+{
+	ssize_t count;
+
+	rtc_write(pos, DS1511_RAMADDR_LSB);
+	for (count = 0; count < size; count++)
+		rtc_write(*buf++, DS1511_RAMDATA);
+
+	return count;
+}
+
+static struct bin_attribute ds1511_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS1511_RAM_MAX,
+	.read = ds1511_nvram_read,
+	.write = ds1511_nvram_write,
+};
+
+static int ds1511_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct rtc_plat_data *pdata;
+	int ret = 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ds1511_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ds1511_base))
+		return PTR_ERR(ds1511_base);
+	pdata->ioaddr = ds1511_base;
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	/*
+	 * turn on the clock and the crystal, etc.
+	 */
+	rtc_write(DS1511_BME, RTC_CMD);
+	rtc_write(0, RTC_CMD1);
+	/*
+	 * clear the wdog counter
+	 */
+	rtc_write(0, DS1511_WD_MSEC);
+	rtc_write(0, DS1511_WD_SEC);
+	/*
+	 * start the clock
+	 */
+	rtc_enable_update();
+
+	/*
+	 * check for a dying bat-tree
+	 */
+	if (rtc_read(RTC_CMD1) & DS1511_BLF1)
+		dev_warn(&pdev->dev, "voltage-low detected.\n");
+
+	spin_lock_init(&pdata->lock);
+	platform_set_drvdata(pdev, pdata);
+
+	pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					      &ds1511_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pdata->rtc))
+		return PTR_ERR(pdata->rtc);
+
+	/*
+	 * if the platform has an interrupt in mind for this device,
+	 * then by all means, set it
+	 */
+	if (pdata->irq > 0) {
+		rtc_read(RTC_CMD1);
+		if (devm_request_irq(&pdev->dev, pdata->irq, ds1511_interrupt,
+			IRQF_SHARED, pdev->name, pdev) < 0) {
+
+			dev_warn(&pdev->dev, "interrupt not available.\n");
+			pdata->irq = 0;
+		}
+	}
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr);
+	if (ret)
+		dev_err(&pdev->dev, "Unable to create sysfs entry: %s\n",
+			ds1511_nvram_attr.attr.name);
+
+	return 0;
+}
+
+static int ds1511_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr);
+	if (pdata->irq > 0) {
+		/*
+		 * disable the alarm interrupt
+		 */
+		rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD);
+		rtc_read(RTC_CMD1);
+	}
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ds1511");
+
+static struct platform_driver ds1511_rtc_driver = {
+	.probe		= ds1511_rtc_probe,
+	.remove		= ds1511_rtc_remove,
+	.driver		= {
+		.name	= "ds1511",
+	},
+};
+
+module_platform_driver(ds1511_rtc_driver);
+
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
+MODULE_DESCRIPTION("Dallas DS1511 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1553.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1553.c
new file mode 100644
index 0000000..9961ec6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1553.c
@@ -0,0 +1,359 @@
+/*
+ * An rtc driver for the Dallas DS1553
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#define RTC_REG_SIZE		0x2000
+#define RTC_OFFSET		0x1ff0
+
+#define RTC_FLAGS		(RTC_OFFSET + 0)
+#define RTC_SECONDS_ALARM	(RTC_OFFSET + 2)
+#define RTC_MINUTES_ALARM	(RTC_OFFSET + 3)
+#define RTC_HOURS_ALARM		(RTC_OFFSET + 4)
+#define RTC_DATE_ALARM		(RTC_OFFSET + 5)
+#define RTC_INTERRUPTS		(RTC_OFFSET + 6)
+#define RTC_WATCHDOG		(RTC_OFFSET + 7)
+#define RTC_CONTROL		(RTC_OFFSET + 8)
+#define RTC_CENTURY		(RTC_OFFSET + 8)
+#define RTC_SECONDS		(RTC_OFFSET + 9)
+#define RTC_MINUTES		(RTC_OFFSET + 10)
+#define RTC_HOURS		(RTC_OFFSET + 11)
+#define RTC_DAY			(RTC_OFFSET + 12)
+#define RTC_DATE		(RTC_OFFSET + 13)
+#define RTC_MONTH		(RTC_OFFSET + 14)
+#define RTC_YEAR		(RTC_OFFSET + 15)
+
+#define RTC_CENTURY_MASK	0x3f
+#define RTC_SECONDS_MASK	0x7f
+#define RTC_DAY_MASK		0x07
+
+/* Bits in the Control/Century register */
+#define RTC_WRITE		0x80
+#define RTC_READ		0x40
+
+/* Bits in the Seconds register */
+#define RTC_STOP		0x80
+
+/* Bits in the Flags register */
+#define RTC_FLAGS_AF		0x40
+#define RTC_FLAGS_BLF		0x10
+
+/* Bits in the Interrupts register */
+#define RTC_INTS_AE		0x80
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	unsigned long last_jiffies;
+	int irq;
+	unsigned int irqen;
+	int alrm_sec;
+	int alrm_min;
+	int alrm_hour;
+	int alrm_mday;
+	spinlock_t lock;
+};
+
+static int ds1553_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u8 century;
+
+	century = bin2bcd((tm->tm_year + 1900) / 100);
+
+	writeb(RTC_WRITE, pdata->ioaddr + RTC_CONTROL);
+
+	writeb(bin2bcd(tm->tm_year % 100), ioaddr + RTC_YEAR);
+	writeb(bin2bcd(tm->tm_mon + 1), ioaddr + RTC_MONTH);
+	writeb(bin2bcd(tm->tm_wday) & RTC_DAY_MASK, ioaddr + RTC_DAY);
+	writeb(bin2bcd(tm->tm_mday), ioaddr + RTC_DATE);
+	writeb(bin2bcd(tm->tm_hour), ioaddr + RTC_HOURS);
+	writeb(bin2bcd(tm->tm_min), ioaddr + RTC_MINUTES);
+	writeb(bin2bcd(tm->tm_sec) & RTC_SECONDS_MASK, ioaddr + RTC_SECONDS);
+
+	/* RTC_CENTURY and RTC_CONTROL share same register */
+	writeb(RTC_WRITE | (century & RTC_CENTURY_MASK), ioaddr + RTC_CENTURY);
+	writeb(century & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
+	return 0;
+}
+
+static int ds1553_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned int year, month, day, hour, minute, second, week;
+	unsigned int century;
+
+	/* give enough time to update RTC in case of continuous read */
+	if (pdata->last_jiffies == jiffies)
+		msleep(1);
+	pdata->last_jiffies = jiffies;
+	writeb(RTC_READ, ioaddr + RTC_CONTROL);
+	second = readb(ioaddr + RTC_SECONDS) & RTC_SECONDS_MASK;
+	minute = readb(ioaddr + RTC_MINUTES);
+	hour = readb(ioaddr + RTC_HOURS);
+	day = readb(ioaddr + RTC_DATE);
+	week = readb(ioaddr + RTC_DAY) & RTC_DAY_MASK;
+	month = readb(ioaddr + RTC_MONTH);
+	year = readb(ioaddr + RTC_YEAR);
+	century = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
+	writeb(0, ioaddr + RTC_CONTROL);
+	tm->tm_sec = bcd2bin(second);
+	tm->tm_min = bcd2bin(minute);
+	tm->tm_hour = bcd2bin(hour);
+	tm->tm_mday = bcd2bin(day);
+	tm->tm_wday = bcd2bin(week);
+	tm->tm_mon = bcd2bin(month) - 1;
+	/* year is 1900 + tm->tm_year */
+	tm->tm_year = bcd2bin(year) + bcd2bin(century) * 100 - 1900;
+
+	if (rtc_valid_tm(tm) < 0) {
+		dev_err(dev, "retrieved date/time is not valid.\n");
+		rtc_time_to_tm(0, tm);
+	}
+	return 0;
+}
+
+static void ds1553_rtc_update_alarm(struct rtc_plat_data *pdata)
+{
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->lock, flags);
+	writeb(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_mday),
+	       ioaddr + RTC_DATE_ALARM);
+	writeb(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_hour),
+	       ioaddr + RTC_HOURS_ALARM);
+	writeb(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_min),
+	       ioaddr + RTC_MINUTES_ALARM);
+	writeb(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_sec),
+	       ioaddr + RTC_SECONDS_ALARM);
+	writeb(pdata->irqen ? RTC_INTS_AE : 0, ioaddr + RTC_INTERRUPTS);
+	readb(ioaddr + RTC_FLAGS);	/* clear interrupts */
+	spin_unlock_irqrestore(&pdata->lock, flags);
+}
+
+static int ds1553_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	pdata->alrm_mday = alrm->time.tm_mday;
+	pdata->alrm_hour = alrm->time.tm_hour;
+	pdata->alrm_min = alrm->time.tm_min;
+	pdata->alrm_sec = alrm->time.tm_sec;
+	if (alrm->enabled)
+		pdata->irqen |= RTC_AF;
+	ds1553_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static int ds1553_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
+	alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
+	alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
+	alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec;
+	alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0;
+	return 0;
+}
+
+static irqreturn_t ds1553_rtc_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned long events = 0;
+
+	spin_lock(&pdata->lock);
+	/* read and clear interrupt */
+	if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_AF) {
+		events = RTC_IRQF;
+		if (readb(ioaddr + RTC_SECONDS_ALARM) & 0x80)
+			events |= RTC_UF;
+		else
+			events |= RTC_AF;
+		rtc_update_irq(pdata->rtc, 1, events);
+	}
+	spin_unlock(&pdata->lock);
+	return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int ds1553_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	if (enabled)
+		pdata->irqen |= RTC_AF;
+	else
+		pdata->irqen &= ~RTC_AF;
+	ds1553_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static const struct rtc_class_ops ds1553_rtc_ops = {
+	.read_time		= ds1553_rtc_read_time,
+	.set_time		= ds1553_rtc_set_time,
+	.read_alarm		= ds1553_rtc_read_alarm,
+	.set_alarm		= ds1553_rtc_set_alarm,
+	.alarm_irq_enable	= ds1553_rtc_alarm_irq_enable,
+};
+
+static ssize_t ds1553_nvram_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		*buf++ = readb(ioaddr + pos++);
+	return count;
+}
+
+static ssize_t ds1553_nvram_write(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		writeb(*buf++, ioaddr + pos++);
+	return count;
+}
+
+static struct bin_attribute ds1553_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = RTC_OFFSET,
+	.read = ds1553_nvram_read,
+	.write = ds1553_nvram_write,
+};
+
+static int ds1553_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	unsigned int cen, sec;
+	struct rtc_plat_data *pdata;
+	void __iomem *ioaddr;
+	int ret = 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ioaddr))
+		return PTR_ERR(ioaddr);
+	pdata->ioaddr = ioaddr;
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	/* turn RTC on if it was not on */
+	sec = readb(ioaddr + RTC_SECONDS);
+	if (sec & RTC_STOP) {
+		sec &= RTC_SECONDS_MASK;
+		cen = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
+		writeb(RTC_WRITE, ioaddr + RTC_CONTROL);
+		writeb(sec, ioaddr + RTC_SECONDS);
+		writeb(cen & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
+	}
+	if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_BLF)
+		dev_warn(&pdev->dev, "voltage-low detected.\n");
+
+	spin_lock_init(&pdata->lock);
+	pdata->last_jiffies = jiffies;
+	platform_set_drvdata(pdev, pdata);
+
+	pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				  &ds1553_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pdata->rtc))
+		return PTR_ERR(pdata->rtc);
+
+	if (pdata->irq > 0) {
+		writeb(0, ioaddr + RTC_INTERRUPTS);
+		if (devm_request_irq(&pdev->dev, pdata->irq,
+				ds1553_rtc_interrupt,
+				0, pdev->name, pdev) < 0) {
+			dev_warn(&pdev->dev, "interrupt not available.\n");
+			pdata->irq = 0;
+		}
+	}
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1553_nvram_attr);
+	if (ret)
+		dev_err(&pdev->dev, "unable to create sysfs file: %s\n",
+			ds1553_nvram_attr.attr.name);
+
+	return 0;
+}
+
+static int ds1553_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	sysfs_remove_bin_file(&pdev->dev.kobj, &ds1553_nvram_attr);
+	if (pdata->irq > 0)
+		writeb(0, pdata->ioaddr + RTC_INTERRUPTS);
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-ds1553");
+
+static struct platform_driver ds1553_rtc_driver = {
+	.probe		= ds1553_rtc_probe,
+	.remove		= ds1553_rtc_remove,
+	.driver		= {
+		.name	= "rtc-ds1553",
+	},
+};
+
+module_platform_driver(ds1553_rtc_driver);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Dallas DS1553 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1672.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1672.c
new file mode 100644
index 0000000..b1ebca0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1672.c
@@ -0,0 +1,219 @@
+/*
+ * An rtc/i2c driver for the Dallas DS1672
+ * Copyright 2005-06 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+
+/* Registers */
+
+#define DS1672_REG_CNT_BASE	0
+#define DS1672_REG_CONTROL	4
+#define DS1672_REG_TRICKLE	5
+
+#define DS1672_REG_CONTROL_EOSC	0x80
+
+static struct i2c_driver ds1672_driver;
+
+/*
+ * In the routines that deal directly with the ds1672 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	unsigned long time;
+	unsigned char addr = DS1672_REG_CNT_BASE;
+	unsigned char buf[4];
+
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &addr
+		},
+		{/* read date */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 4,
+			.buf = buf
+		},
+	};
+
+	/* read date registers */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw read data - counters=%02x,%02x,%02x,%02x\n",
+		__func__, buf[0], buf[1], buf[2], buf[3]);
+
+	time = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+	       (buf[1] << 8) | buf[0];
+
+	rtc_time_to_tm(time, tm);
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__, tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return 0;
+}
+
+static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
+{
+	int xfer;
+	unsigned char buf[6];
+
+	buf[0] = DS1672_REG_CNT_BASE;
+	buf[1] = secs & 0x000000FF;
+	buf[2] = (secs & 0x0000FF00) >> 8;
+	buf[3] = (secs & 0x00FF0000) >> 16;
+	buf[4] = (secs & 0xFF000000) >> 24;
+	buf[5] = 0;		/* set control reg to enable counting */
+
+	xfer = i2c_master_send(client, buf, 6);
+	if (xfer != 6) {
+		dev_err(&client->dev, "%s: send: %d\n", __func__, xfer);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return ds1672_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	return ds1672_set_mmss(to_i2c_client(dev), secs);
+}
+
+static int ds1672_get_control(struct i2c_client *client, u8 *status)
+{
+	unsigned char addr = DS1672_REG_CONTROL;
+
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &addr
+		},
+		{/* read control */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = status
+		},
+	};
+
+	/* read control register */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_control(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 control;
+	int err;
+
+	err = ds1672_get_control(client, &control);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%s\n", (control & DS1672_REG_CONTROL_EOSC)
+		       ? "disabled" : "enabled");
+}
+
+static DEVICE_ATTR(control, S_IRUGO, show_control, NULL);
+
+static const struct rtc_class_ops ds1672_rtc_ops = {
+	.read_time = ds1672_rtc_read_time,
+	.set_mmss = ds1672_rtc_set_mmss,
+};
+
+static int ds1672_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int err = 0;
+	u8 control;
+	struct rtc_device *rtc;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	rtc = devm_rtc_device_register(&client->dev, ds1672_driver.driver.name,
+				  &ds1672_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	/* read control register */
+	err = ds1672_get_control(client, &control);
+	if (err) {
+		dev_warn(&client->dev, "Unable to read the control register\n");
+	}
+
+	if (control & DS1672_REG_CONTROL_EOSC)
+		dev_warn(&client->dev, "Oscillator not enabled. "
+			 "Set time to enable.\n");
+
+	/* Register sysfs hooks */
+	err = device_create_file(&client->dev, &dev_attr_control);
+	if (err)
+		dev_err(&client->dev, "Unable to create sysfs entry: %s\n",
+			dev_attr_control.attr.name);
+
+	return 0;
+}
+
+static const struct i2c_device_id ds1672_id[] = {
+	{ "ds1672", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds1672_id);
+
+static const struct of_device_id ds1672_of_match[] = {
+	{ .compatible = "dallas,ds1672" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds1672_of_match);
+
+static struct i2c_driver ds1672_driver = {
+	.driver = {
+		   .name = "rtc-ds1672",
+		   .of_match_table = of_match_ptr(ds1672_of_match),
+	},
+	.probe = &ds1672_probe,
+	.id_table = ds1672_id,
+};
+
+module_i2c_driver(ds1672_driver);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1685.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1685.c
new file mode 100644
index 0000000..ed43b43
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1685.c
@@ -0,0 +1,2239 @@
+/*
+ * An rtc driver for the Dallas/Maxim DS1685/DS1687 and related real-time
+ * chips.
+ *
+ * Copyright (C) 2011-2014 Joshua Kinard <kumba@gentoo.org>.
+ * Copyright (C) 2009 Matthias Fuchs <matthias.fuchs@esd-electronics.com>.
+ *
+ * References:
+ *    DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10.
+ *    DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10.
+ *    DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105.
+ *    Application Note 90, Using the Multiplex Bus RTC Extended Features.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+
+#include <linux/rtc/ds1685.h>
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
+
+
+/* ----------------------------------------------------------------------- */
+/* Standard read/write functions if platform does not provide overrides */
+
+/**
+ * ds1685_read - read a value from an rtc register.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @reg: the register address to read.
+ */
+static u8
+ds1685_read(struct ds1685_priv *rtc, int reg)
+{
+	return readb((u8 __iomem *)rtc->regs +
+		     (reg * rtc->regstep));
+}
+
+/**
+ * ds1685_write - write a value to an rtc register.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @reg: the register address to write.
+ * @value: value to write to the register.
+ */
+static void
+ds1685_write(struct ds1685_priv *rtc, int reg, u8 value)
+{
+	writeb(value, ((u8 __iomem *)rtc->regs +
+		       (reg * rtc->regstep)));
+}
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* Inlined functions */
+
+/**
+ * ds1685_rtc_bcd2bin - bcd2bin wrapper in case platform doesn't support BCD.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @val: u8 time value to consider converting.
+ * @bcd_mask: u8 mask value if BCD mode is used.
+ * @bin_mask: u8 mask value if BIN mode is used.
+ *
+ * Returns the value, converted to BIN if originally in BCD and bcd_mode TRUE.
+ */
+static inline u8
+ds1685_rtc_bcd2bin(struct ds1685_priv *rtc, u8 val, u8 bcd_mask, u8 bin_mask)
+{
+	if (rtc->bcd_mode)
+		return (bcd2bin(val) & bcd_mask);
+
+	return (val & bin_mask);
+}
+
+/**
+ * ds1685_rtc_bin2bcd - bin2bcd wrapper in case platform doesn't support BCD.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @val: u8 time value to consider converting.
+ * @bin_mask: u8 mask value if BIN mode is used.
+ * @bcd_mask: u8 mask value if BCD mode is used.
+ *
+ * Returns the value, converted to BCD if originally in BIN and bcd_mode TRUE.
+ */
+static inline u8
+ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
+{
+	if (rtc->bcd_mode)
+		return (bin2bcd(val) & bcd_mask);
+
+	return (val & bin_mask);
+}
+
+/**
+ * s1685_rtc_check_mday - check validity of the day of month.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @mday: day of month.
+ *
+ * Returns -EDOM if the day of month is not within 1..31 range.
+ */
+static inline int
+ds1685_rtc_check_mday(struct ds1685_priv *rtc, u8 mday)
+{
+	if (rtc->bcd_mode) {
+		if (mday < 0x01 || mday > 0x31 || (mday & 0x0f) > 0x09)
+			return -EDOM;
+	} else {
+		if (mday < 1 || mday > 31)
+			return -EDOM;
+	}
+	return 0;
+}
+
+/**
+ * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
+ * @rtc: pointer to the ds1685 rtc structure.
+ */
+static inline void
+ds1685_rtc_switch_to_bank0(struct ds1685_priv *rtc)
+{
+	rtc->write(rtc, RTC_CTRL_A,
+		   (rtc->read(rtc, RTC_CTRL_A) & ~(RTC_CTRL_A_DV0)));
+}
+
+/**
+ * ds1685_rtc_switch_to_bank1 - switch the rtc to bank 1.
+ * @rtc: pointer to the ds1685 rtc structure.
+ */
+static inline void
+ds1685_rtc_switch_to_bank1(struct ds1685_priv *rtc)
+{
+	rtc->write(rtc, RTC_CTRL_A,
+		   (rtc->read(rtc, RTC_CTRL_A) | RTC_CTRL_A_DV0));
+}
+
+/**
+ * ds1685_rtc_begin_data_access - prepare the rtc for data access.
+ * @rtc: pointer to the ds1685 rtc structure.
+ *
+ * This takes several steps to prepare the rtc for access to get/set time
+ * and alarm values from the rtc registers:
+ *  - Sets the SET bit in Control Register B.
+ *  - Reads Ext Control Register 4A and checks the INCR bit.
+ *  - If INCR is active, a short delay is added before Ext Control Register 4A
+ *    is read again in a loop until INCR is inactive.
+ *  - Switches the rtc to bank 1.  This allows access to all relevant
+ *    data for normal rtc operation, as bank 0 contains only the nvram.
+ */
+static inline void
+ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
+{
+	/* Set the SET bit in Ctrl B */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
+
+	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
+	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
+		cpu_relax();
+
+	/* Switch to Bank 1 */
+	ds1685_rtc_switch_to_bank1(rtc);
+}
+
+/**
+ * ds1685_rtc_end_data_access - end data access on the rtc.
+ * @rtc: pointer to the ds1685 rtc structure.
+ *
+ * This ends what was started by ds1685_rtc_begin_data_access:
+ *  - Switches the rtc back to bank 0.
+ *  - Clears the SET bit in Control Register B.
+ */
+static inline void
+ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
+{
+	/* Switch back to Bank 0 */
+	ds1685_rtc_switch_to_bank1(rtc);
+
+	/* Clear the SET bit in Ctrl B */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
+}
+
+/**
+ * ds1685_rtc_begin_ctrl_access - prepare the rtc for ctrl access.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @flags: irq flags variable for spin_lock_irqsave.
+ *
+ * This takes several steps to prepare the rtc for access to read just the
+ * control registers:
+ *  - Sets a spinlock on the rtc IRQ.
+ *  - Switches the rtc to bank 1.  This allows access to the two extended
+ *    control registers.
+ *
+ * Only use this where you are certain another lock will not be held.
+ */
+static inline void
+ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long *flags)
+{
+	spin_lock_irqsave(&rtc->lock, *flags);
+	ds1685_rtc_switch_to_bank1(rtc);
+}
+
+/**
+ * ds1685_rtc_end_ctrl_access - end ctrl access on the rtc.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @flags: irq flags variable for spin_unlock_irqrestore.
+ *
+ * This ends what was started by ds1685_rtc_begin_ctrl_access:
+ *  - Switches the rtc back to bank 0.
+ *  - Unsets the spinlock on the rtc IRQ.
+ */
+static inline void
+ds1685_rtc_end_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
+{
+	ds1685_rtc_switch_to_bank0(rtc);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+}
+
+/**
+ * ds1685_rtc_get_ssn - retrieve the silicon serial number.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @ssn: u8 array to hold the bits of the silicon serial number.
+ *
+ * This number starts at 0x40, and is 8-bytes long, ending at 0x47. The
+ * first byte is the model number, the next six bytes are the serial number
+ * digits, and the final byte is a CRC check byte.  Together, they form the
+ * silicon serial number.
+ *
+ * These values are stored in bank1, so ds1685_rtc_switch_to_bank1 must be
+ * called first before calling this function, else data will be read out of
+ * the bank0 NVRAM.  Be sure to call ds1685_rtc_switch_to_bank0 when done.
+ */
+static inline void
+ds1685_rtc_get_ssn(struct ds1685_priv *rtc, u8 *ssn)
+{
+	ssn[0] = rtc->read(rtc, RTC_BANK1_SSN_MODEL);
+	ssn[1] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_1);
+	ssn[2] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_2);
+	ssn[3] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_3);
+	ssn[4] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_4);
+	ssn[5] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_5);
+	ssn[6] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_6);
+	ssn[7] = rtc->read(rtc, RTC_BANK1_SSN_CRC);
+}
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* Read/Set Time & Alarm functions */
+
+/**
+ * ds1685_rtc_read_time - reads the time registers.
+ * @dev: pointer to device structure.
+ * @tm: pointer to rtc_time structure.
+ */
+static int
+ds1685_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrlb, century;
+	u8 seconds, minutes, hours, wday, mday, month, years;
+
+	/* Fetch the time info from the RTC registers. */
+	ds1685_rtc_begin_data_access(rtc);
+	seconds = rtc->read(rtc, RTC_SECS);
+	minutes = rtc->read(rtc, RTC_MINS);
+	hours   = rtc->read(rtc, RTC_HRS);
+	wday    = rtc->read(rtc, RTC_WDAY);
+	mday    = rtc->read(rtc, RTC_MDAY);
+	month   = rtc->read(rtc, RTC_MONTH);
+	years   = rtc->read(rtc, RTC_YEAR);
+	century = rtc->read(rtc, RTC_CENTURY);
+	ctrlb   = rtc->read(rtc, RTC_CTRL_B);
+	ds1685_rtc_end_data_access(rtc);
+
+	/* bcd2bin if needed, perform fixups, and store to rtc_time. */
+	years        = ds1685_rtc_bcd2bin(rtc, years, RTC_YEAR_BCD_MASK,
+					  RTC_YEAR_BIN_MASK);
+	century      = ds1685_rtc_bcd2bin(rtc, century, RTC_CENTURY_MASK,
+					  RTC_CENTURY_MASK);
+	tm->tm_sec   = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK,
+					  RTC_SECS_BIN_MASK);
+	tm->tm_min   = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK,
+					  RTC_MINS_BIN_MASK);
+	tm->tm_hour  = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_24_BCD_MASK,
+					  RTC_HRS_24_BIN_MASK);
+	tm->tm_wday  = (ds1685_rtc_bcd2bin(rtc, wday, RTC_WDAY_MASK,
+					   RTC_WDAY_MASK) - 1);
+	tm->tm_mday  = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
+					  RTC_MDAY_BIN_MASK);
+	tm->tm_mon   = (ds1685_rtc_bcd2bin(rtc, month, RTC_MONTH_BCD_MASK,
+					   RTC_MONTH_BIN_MASK) - 1);
+	tm->tm_year  = ((years + (century * 100)) - 1900);
+	tm->tm_yday  = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_isdst = 0; /* RTC has hardcoded timezone, so don't use. */
+
+	return rtc_valid_tm(tm);
+}
+
+/**
+ * ds1685_rtc_set_time - sets the time registers.
+ * @dev: pointer to device structure.
+ * @tm: pointer to rtc_time structure.
+ */
+static int
+ds1685_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrlb, seconds, minutes, hours, wday, mday, month, years, century;
+
+	/* Fetch the time info from rtc_time. */
+	seconds = ds1685_rtc_bin2bcd(rtc, tm->tm_sec, RTC_SECS_BIN_MASK,
+				     RTC_SECS_BCD_MASK);
+	minutes = ds1685_rtc_bin2bcd(rtc, tm->tm_min, RTC_MINS_BIN_MASK,
+				     RTC_MINS_BCD_MASK);
+	hours   = ds1685_rtc_bin2bcd(rtc, tm->tm_hour, RTC_HRS_24_BIN_MASK,
+				     RTC_HRS_24_BCD_MASK);
+	wday    = ds1685_rtc_bin2bcd(rtc, (tm->tm_wday + 1), RTC_WDAY_MASK,
+				     RTC_WDAY_MASK);
+	mday    = ds1685_rtc_bin2bcd(rtc, tm->tm_mday, RTC_MDAY_BIN_MASK,
+				     RTC_MDAY_BCD_MASK);
+	month   = ds1685_rtc_bin2bcd(rtc, (tm->tm_mon + 1), RTC_MONTH_BIN_MASK,
+				     RTC_MONTH_BCD_MASK);
+	years   = ds1685_rtc_bin2bcd(rtc, (tm->tm_year % 100),
+				     RTC_YEAR_BIN_MASK, RTC_YEAR_BCD_MASK);
+	century = ds1685_rtc_bin2bcd(rtc, ((tm->tm_year + 1900) / 100),
+				     RTC_CENTURY_MASK, RTC_CENTURY_MASK);
+
+	/*
+	 * Perform Sanity Checks:
+	 *   - Months: !> 12, Month Day != 0.
+	 *   - Month Day !> Max days in current month.
+	 *   - Hours !>= 24, Mins !>= 60, Secs !>= 60, & Weekday !> 7.
+	 */
+	if ((tm->tm_mon > 11) || (mday == 0))
+		return -EDOM;
+
+	if (tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year))
+		return -EDOM;
+
+	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) ||
+	    (tm->tm_sec >= 60)  || (wday > 7))
+		return -EDOM;
+
+	/*
+	 * Set the data mode to use and store the time values in the
+	 * RTC registers.
+	 */
+	ds1685_rtc_begin_data_access(rtc);
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	if (rtc->bcd_mode)
+		ctrlb &= ~(RTC_CTRL_B_DM);
+	else
+		ctrlb |= RTC_CTRL_B_DM;
+	rtc->write(rtc, RTC_CTRL_B, ctrlb);
+	rtc->write(rtc, RTC_SECS, seconds);
+	rtc->write(rtc, RTC_MINS, minutes);
+	rtc->write(rtc, RTC_HRS, hours);
+	rtc->write(rtc, RTC_WDAY, wday);
+	rtc->write(rtc, RTC_MDAY, mday);
+	rtc->write(rtc, RTC_MONTH, month);
+	rtc->write(rtc, RTC_YEAR, years);
+	rtc->write(rtc, RTC_CENTURY, century);
+	ds1685_rtc_end_data_access(rtc);
+
+	return 0;
+}
+
+/**
+ * ds1685_rtc_read_alarm - reads the alarm registers.
+ * @dev: pointer to device structure.
+ * @alrm: pointer to rtc_wkalrm structure.
+ *
+ * There are three primary alarm registers: seconds, minutes, and hours.
+ * A fourth alarm register for the month date is also available in bank1 for
+ * kickstart/wakeup features.  The DS1685/DS1687 manual states that a
+ * "don't care" value ranging from 0xc0 to 0xff may be written into one or
+ * more of the three alarm bytes to act as a wildcard value.  The fourth
+ * byte doesn't support a "don't care" value.
+ */
+static int
+ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
+	int ret;
+
+	/* Fetch the alarm info from the RTC alarm registers. */
+	ds1685_rtc_begin_data_access(rtc);
+	seconds	= rtc->read(rtc, RTC_SECS_ALARM);
+	minutes	= rtc->read(rtc, RTC_MINS_ALARM);
+	hours	= rtc->read(rtc, RTC_HRS_ALARM);
+	mday	= rtc->read(rtc, RTC_MDAY_ALARM);
+	ctrlb	= rtc->read(rtc, RTC_CTRL_B);
+	ctrlc	= rtc->read(rtc, RTC_CTRL_C);
+	ds1685_rtc_end_data_access(rtc);
+
+	/* Check the month date for validity. */
+	ret = ds1685_rtc_check_mday(rtc, mday);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check the three alarm bytes.
+	 *
+	 * The Linux RTC system doesn't support the "don't care" capability
+	 * of this RTC chip.  We check for it anyways in case support is
+	 * added in the future and only assign when we care.
+	 */
+	if (likely(seconds < 0xc0))
+		alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
+						       RTC_SECS_BCD_MASK,
+						       RTC_SECS_BIN_MASK);
+
+	if (likely(minutes < 0xc0))
+		alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
+						       RTC_MINS_BCD_MASK,
+						       RTC_MINS_BIN_MASK);
+
+	if (likely(hours < 0xc0))
+		alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
+							RTC_HRS_24_BCD_MASK,
+							RTC_HRS_24_BIN_MASK);
+
+	/* Write the data to rtc_wkalrm. */
+	alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
+						RTC_MDAY_BIN_MASK);
+	alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
+	alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
+
+	return 0;
+}
+
+/**
+ * ds1685_rtc_set_alarm - sets the alarm in registers.
+ * @dev: pointer to device structure.
+ * @alrm: pointer to rtc_wkalrm structure.
+ */
+static int
+ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrlb, seconds, minutes, hours, mday;
+	int ret;
+
+	/* Fetch the alarm info and convert to BCD. */
+	seconds	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
+				     RTC_SECS_BIN_MASK,
+				     RTC_SECS_BCD_MASK);
+	minutes	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_min,
+				     RTC_MINS_BIN_MASK,
+				     RTC_MINS_BCD_MASK);
+	hours	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_hour,
+				     RTC_HRS_24_BIN_MASK,
+				     RTC_HRS_24_BCD_MASK);
+	mday	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_mday,
+				     RTC_MDAY_BIN_MASK,
+				     RTC_MDAY_BCD_MASK);
+
+	/* Check the month date for validity. */
+	ret = ds1685_rtc_check_mday(rtc, mday);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check the three alarm bytes.
+	 *
+	 * The Linux RTC system doesn't support the "don't care" capability
+	 * of this RTC chip because rtc_valid_tm tries to validate every
+	 * field, and we only support four fields.  We put the support
+	 * here anyways for the future.
+	 */
+	if (unlikely(seconds >= 0xc0))
+		seconds = 0xff;
+
+	if (unlikely(minutes >= 0xc0))
+		minutes = 0xff;
+
+	if (unlikely(hours >= 0xc0))
+		hours = 0xff;
+
+	alrm->time.tm_mon	= -1;
+	alrm->time.tm_year	= -1;
+	alrm->time.tm_wday	= -1;
+	alrm->time.tm_yday	= -1;
+	alrm->time.tm_isdst	= -1;
+
+	/* Disable the alarm interrupt first. */
+	ds1685_rtc_begin_data_access(rtc);
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	rtc->write(rtc, RTC_CTRL_B, (ctrlb & ~(RTC_CTRL_B_AIE)));
+
+	/* Read ctrlc to clear RTC_CTRL_C_AF. */
+	rtc->read(rtc, RTC_CTRL_C);
+
+	/*
+	 * Set the data mode to use and store the time values in the
+	 * RTC registers.
+	 */
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	if (rtc->bcd_mode)
+		ctrlb &= ~(RTC_CTRL_B_DM);
+	else
+		ctrlb |= RTC_CTRL_B_DM;
+	rtc->write(rtc, RTC_CTRL_B, ctrlb);
+	rtc->write(rtc, RTC_SECS_ALARM, seconds);
+	rtc->write(rtc, RTC_MINS_ALARM, minutes);
+	rtc->write(rtc, RTC_HRS_ALARM, hours);
+	rtc->write(rtc, RTC_MDAY_ALARM, mday);
+
+	/* Re-enable the alarm if needed. */
+	if (alrm->enabled) {
+		ctrlb = rtc->read(rtc, RTC_CTRL_B);
+		ctrlb |= RTC_CTRL_B_AIE;
+		rtc->write(rtc, RTC_CTRL_B, ctrlb);
+	}
+
+	/* Done! */
+	ds1685_rtc_end_data_access(rtc);
+
+	return 0;
+}
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* /dev/rtcX Interface functions */
+
+/**
+ * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
+ * @dev: pointer to device structure.
+ * @enabled: flag indicating whether to enable or disable.
+ */
+static int
+ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds1685_priv *rtc = dev_get_drvdata(dev);
+	unsigned long flags = 0;
+
+	/* Enable/disable the Alarm IRQ-Enable flag. */
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	/* Flip the requisite interrupt-enable bit. */
+	if (enabled)
+		rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) |
+					     RTC_CTRL_B_AIE));
+	else
+		rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) &
+					     ~(RTC_CTRL_B_AIE)));
+
+	/* Read Control C to clear all the flag bits. */
+	rtc->read(rtc, RTC_CTRL_C);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* IRQ handler & workqueue. */
+
+/**
+ * ds1685_rtc_irq_handler - IRQ handler.
+ * @irq: IRQ number.
+ * @dev_id: platform device pointer.
+ */
+static irqreturn_t
+ds1685_rtc_irq_handler(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrlb, ctrlc;
+	unsigned long events = 0;
+	u8 num_irqs = 0;
+
+	/* Abort early if the device isn't ready yet (i.e., DEBUG_SHIRQ). */
+	if (unlikely(!rtc))
+		return IRQ_HANDLED;
+
+	/* Ctrlb holds the interrupt-enable bits and ctrlc the flag bits. */
+	spin_lock(&rtc->lock);
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	ctrlc = rtc->read(rtc, RTC_CTRL_C);
+
+	/* Is the IRQF bit set? */
+	if (likely(ctrlc & RTC_CTRL_C_IRQF)) {
+		/*
+		 * We need to determine if it was one of the standard
+		 * events: PF, AF, or UF.  If so, we handle them and
+		 * update the RTC core.
+		 */
+		if (likely(ctrlc & RTC_CTRL_B_PAU_MASK)) {
+			events = RTC_IRQF;
+
+			/* Check for a periodic interrupt. */
+			if ((ctrlb & RTC_CTRL_B_PIE) &&
+			    (ctrlc & RTC_CTRL_C_PF)) {
+				events |= RTC_PF;
+				num_irqs++;
+			}
+
+			/* Check for an alarm interrupt. */
+			if ((ctrlb & RTC_CTRL_B_AIE) &&
+			    (ctrlc & RTC_CTRL_C_AF)) {
+				events |= RTC_AF;
+				num_irqs++;
+			}
+
+			/* Check for an update interrupt. */
+			if ((ctrlb & RTC_CTRL_B_UIE) &&
+			    (ctrlc & RTC_CTRL_C_UF)) {
+				events |= RTC_UF;
+				num_irqs++;
+			}
+
+			rtc_update_irq(rtc->dev, num_irqs, events);
+		} else {
+			/*
+			 * One of the "extended" interrupts was received that
+			 * is not recognized by the RTC core.  These need to
+			 * be handled in task context as they can call other
+			 * functions and the time spent in irq context needs
+			 * to be minimized.  Schedule them into a workqueue
+			 * and inform the RTC core that the IRQs were handled.
+			 */
+			spin_unlock(&rtc->lock);
+			schedule_work(&rtc->work);
+			rtc_update_irq(rtc->dev, 0, 0);
+			return IRQ_HANDLED;
+		}
+	}
+	spin_unlock(&rtc->lock);
+
+	return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/**
+ * ds1685_rtc_work_queue - work queue handler.
+ * @work: work_struct containing data to work on in task context.
+ */
+static void
+ds1685_rtc_work_queue(struct work_struct *work)
+{
+	struct ds1685_priv *rtc = container_of(work,
+					       struct ds1685_priv, work);
+	struct platform_device *pdev = to_platform_device(&rtc->dev->dev);
+	struct mutex *rtc_mutex = &rtc->dev->ops_lock;
+	u8 ctrl4a, ctrl4b;
+
+	mutex_lock(rtc_mutex);
+
+	ds1685_rtc_switch_to_bank1(rtc);
+	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
+	ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
+
+	/*
+	 * Check for a kickstart interrupt. With Vcc applied, this
+	 * typically means that the power button was pressed, so we
+	 * begin the shutdown sequence.
+	 */
+	if ((ctrl4b & RTC_CTRL_4B_KSE) && (ctrl4a & RTC_CTRL_4A_KF)) {
+		/* Briefly disable kickstarts to debounce button presses. */
+		rtc->write(rtc, RTC_EXT_CTRL_4B,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4B) &
+			    ~(RTC_CTRL_4B_KSE)));
+
+		/* Clear the kickstart flag. */
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (ctrl4a & ~(RTC_CTRL_4A_KF)));
+
+
+		/*
+		 * Sleep 500ms before re-enabling kickstarts.  This allows
+		 * adequate time to avoid reading signal jitter as additional
+		 * button presses.
+		 */
+		msleep(500);
+		rtc->write(rtc, RTC_EXT_CTRL_4B,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4B) |
+			    RTC_CTRL_4B_KSE));
+
+		/* Call the platform pre-poweroff function. Else, shutdown. */
+		if (rtc->prepare_poweroff != NULL)
+			rtc->prepare_poweroff();
+		else
+			ds1685_rtc_poweroff(pdev);
+	}
+
+	/*
+	 * Check for a wake-up interrupt.  With Vcc applied, this is
+	 * essentially a second alarm interrupt, except it takes into
+	 * account the 'date' register in bank1 in addition to the
+	 * standard three alarm registers.
+	 */
+	if ((ctrl4b & RTC_CTRL_4B_WIE) && (ctrl4a & RTC_CTRL_4A_WF)) {
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (ctrl4a & ~(RTC_CTRL_4A_WF)));
+
+		/* Call the platform wake_alarm function if defined. */
+		if (rtc->wake_alarm != NULL)
+			rtc->wake_alarm();
+		else
+			dev_warn(&pdev->dev,
+				 "Wake Alarm IRQ just occurred!\n");
+	}
+
+	/*
+	 * Check for a ram-clear interrupt.  This happens if RIE=1 and RF=0
+	 * when RCE=1 in 4B.  This clears all NVRAM bytes in bank0 by setting
+	 * each byte to a logic 1.  This has no effect on any extended
+	 * NV-SRAM that might be present, nor on the time/calendar/alarm
+	 * registers.  After a ram-clear is completed, there is a minimum
+	 * recovery time of ~150ms in which all reads/writes are locked out.
+	 * NOTE: A ram-clear can still occur if RCE=1 and RIE=0.  We cannot
+	 * catch this scenario.
+	 */
+	if ((ctrl4b & RTC_CTRL_4B_RIE) && (ctrl4a & RTC_CTRL_4A_RF)) {
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (ctrl4a & ~(RTC_CTRL_4A_RF)));
+		msleep(150);
+
+		/* Call the platform post_ram_clear function if defined. */
+		if (rtc->post_ram_clear != NULL)
+			rtc->post_ram_clear();
+		else
+			dev_warn(&pdev->dev,
+				 "RAM-Clear IRQ just occurred!\n");
+	}
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	mutex_unlock(rtc_mutex);
+}
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* ProcFS interface */
+
+#ifdef CONFIG_PROC_FS
+#define NUM_REGS	6	/* Num of control registers. */
+#define NUM_BITS	8	/* Num bits per register. */
+#define NUM_SPACES	4	/* Num spaces between each bit. */
+
+/*
+ * Periodic Interrupt Rates.
+ */
+static const char *ds1685_rtc_pirq_rate[16] = {
+	"none", "3.90625ms", "7.8125ms", "0.122070ms", "0.244141ms",
+	"0.488281ms", "0.9765625ms", "1.953125ms", "3.90625ms", "7.8125ms",
+	"15.625ms", "31.25ms", "62.5ms", "125ms", "250ms", "500ms"
+};
+
+/*
+ * Square-Wave Output Frequencies.
+ */
+static const char *ds1685_rtc_sqw_freq[16] = {
+	"none", "256Hz", "128Hz", "8192Hz", "4096Hz", "2048Hz", "1024Hz",
+	"512Hz", "256Hz", "128Hz", "64Hz", "32Hz", "16Hz", "8Hz", "4Hz", "2Hz"
+};
+
+#ifdef CONFIG_RTC_DS1685_PROC_REGS
+/**
+ * ds1685_rtc_print_regs - helper function to print register values.
+ * @hex: hex byte to convert into binary bits.
+ * @dest: destination char array.
+ *
+ * This is basically a hex->binary function, just with extra spacing between
+ * the digits.  It only works on 1-byte values (8 bits).
+ */
+static char*
+ds1685_rtc_print_regs(u8 hex, char *dest)
+{
+	u32 i, j;
+	char *tmp = dest;
+
+	for (i = 0; i < NUM_BITS; i++) {
+		*tmp++ = ((hex & 0x80) != 0 ? '1' : '0');
+		for (j = 0; j < NUM_SPACES; j++)
+			*tmp++ = ' ';
+		hex <<= 1;
+	}
+	*tmp++ = '\0';
+
+	return dest;
+}
+#endif
+
+/**
+ * ds1685_rtc_proc - procfs access function.
+ * @dev: pointer to device structure.
+ * @seq: pointer to seq_file structure.
+ */
+static int
+ds1685_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrla, ctrlb, ctrlc, ctrld, ctrl4a, ctrl4b, ssn[8];
+	char *model;
+#ifdef CONFIG_RTC_DS1685_PROC_REGS
+	char bits[NUM_REGS][(NUM_BITS * NUM_SPACES) + NUM_BITS + 1];
+#endif
+
+	/* Read all the relevant data from the control registers. */
+	ds1685_rtc_switch_to_bank1(rtc);
+	ds1685_rtc_get_ssn(rtc, ssn);
+	ctrla = rtc->read(rtc, RTC_CTRL_A);
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	ctrlc = rtc->read(rtc, RTC_CTRL_C);
+	ctrld = rtc->read(rtc, RTC_CTRL_D);
+	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
+	ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	/* Determine the RTC model. */
+	switch (ssn[0]) {
+	case RTC_MODEL_DS1685:
+		model = "DS1685/DS1687\0";
+		break;
+	case RTC_MODEL_DS1689:
+		model = "DS1689/DS1693\0";
+		break;
+	case RTC_MODEL_DS17285:
+		model = "DS17285/DS17287\0";
+		break;
+	case RTC_MODEL_DS17485:
+		model = "DS17485/DS17487\0";
+		break;
+	case RTC_MODEL_DS17885:
+		model = "DS17885/DS17887\0";
+		break;
+	default:
+		model = "Unknown\0";
+		break;
+	}
+
+	/* Print out the information. */
+	seq_printf(seq,
+	   "Model\t\t: %s\n"
+	   "Oscillator\t: %s\n"
+	   "12/24hr\t\t: %s\n"
+	   "DST\t\t: %s\n"
+	   "Data mode\t: %s\n"
+	   "Battery\t\t: %s\n"
+	   "Aux batt\t: %s\n"
+	   "Update IRQ\t: %s\n"
+	   "Periodic IRQ\t: %s\n"
+	   "Periodic Rate\t: %s\n"
+	   "SQW Freq\t: %s\n"
+#ifdef CONFIG_RTC_DS1685_PROC_REGS
+	   "Serial #\t: %8phC\n"
+	   "Register Status\t:\n"
+	   "   Ctrl A\t: UIP  DV2  DV1  DV0  RS3  RS2  RS1  RS0\n"
+	   "\t\t:  %s\n"
+	   "   Ctrl B\t: SET  PIE  AIE  UIE  SQWE  DM  2412 DSE\n"
+	   "\t\t:  %s\n"
+	   "   Ctrl C\t: IRQF  PF   AF   UF  ---  ---  ---  ---\n"
+	   "\t\t:  %s\n"
+	   "   Ctrl D\t: VRT  ---  ---  ---  ---  ---  ---  ---\n"
+	   "\t\t:  %s\n"
+#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
+	   "   Ctrl 4A\t: VRT2 INCR BME  ---  PAB   RF   WF   KF\n"
+#else
+	   "   Ctrl 4A\t: VRT2 INCR ---  ---  PAB   RF   WF   KF\n"
+#endif
+	   "\t\t:  %s\n"
+	   "   Ctrl 4B\t: ABE  E32k  CS  RCE  PRS  RIE  WIE  KSE\n"
+	   "\t\t:  %s\n",
+#else
+	   "Serial #\t: %8phC\n",
+#endif
+	   model,
+	   ((ctrla & RTC_CTRL_A_DV1) ? "enabled" : "disabled"),
+	   ((ctrlb & RTC_CTRL_B_2412) ? "24-hour" : "12-hour"),
+	   ((ctrlb & RTC_CTRL_B_DSE) ? "enabled" : "disabled"),
+	   ((ctrlb & RTC_CTRL_B_DM) ? "binary" : "BCD"),
+	   ((ctrld & RTC_CTRL_D_VRT) ? "ok" : "exhausted or n/a"),
+	   ((ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "exhausted or n/a"),
+	   ((ctrlb & RTC_CTRL_B_UIE) ? "yes" : "no"),
+	   ((ctrlb & RTC_CTRL_B_PIE) ? "yes" : "no"),
+	   (!(ctrl4b & RTC_CTRL_4B_E32K) ?
+	    ds1685_rtc_pirq_rate[(ctrla & RTC_CTRL_A_RS_MASK)] : "none"),
+	   (!((ctrl4b & RTC_CTRL_4B_E32K)) ?
+	    ds1685_rtc_sqw_freq[(ctrla & RTC_CTRL_A_RS_MASK)] : "32768Hz"),
+#ifdef CONFIG_RTC_DS1685_PROC_REGS
+	   ssn,
+	   ds1685_rtc_print_regs(ctrla, bits[0]),
+	   ds1685_rtc_print_regs(ctrlb, bits[1]),
+	   ds1685_rtc_print_regs(ctrlc, bits[2]),
+	   ds1685_rtc_print_regs(ctrld, bits[3]),
+	   ds1685_rtc_print_regs(ctrl4a, bits[4]),
+	   ds1685_rtc_print_regs(ctrl4b, bits[5]));
+#else
+	   ssn);
+#endif
+	return 0;
+}
+#else
+#define ds1685_rtc_proc NULL
+#endif /* CONFIG_PROC_FS */
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* RTC Class operations */
+
+static const struct rtc_class_ops
+ds1685_rtc_ops = {
+	.proc = ds1685_rtc_proc,
+	.read_time = ds1685_rtc_read_time,
+	.set_time = ds1685_rtc_set_time,
+	.read_alarm = ds1685_rtc_read_alarm,
+	.set_alarm = ds1685_rtc_set_alarm,
+	.alarm_irq_enable = ds1685_rtc_alarm_irq_enable,
+};
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* SysFS interface */
+
+#ifdef CONFIG_SYSFS
+/**
+ * ds1685_rtc_sysfs_nvram_read - reads rtc nvram via sysfs.
+ * @file: pointer to file structure.
+ * @kobj: pointer to kobject structure.
+ * @bin_attr: pointer to bin_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ * @pos: current file position pointer.
+ * @size: size of the data to read.
+ */
+static ssize_t
+ds1685_rtc_sysfs_nvram_read(struct file *filp, struct kobject *kobj,
+			    struct bin_attribute *bin_attr, char *buf,
+			    loff_t pos, size_t size)
+{
+	struct platform_device *pdev =
+		to_platform_device(container_of(kobj, struct device, kobj));
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	ssize_t count;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	/* Read NVRAM in time and bank0 registers. */
+	for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
+	     count++, size--) {
+		if (count < NVRAM_SZ_TIME)
+			*buf++ = rtc->read(rtc, (NVRAM_TIME_BASE + pos++));
+		else
+			*buf++ = rtc->read(rtc, (NVRAM_BANK0_BASE + pos++));
+	}
+
+#ifndef CONFIG_RTC_DRV_DS1689
+	if (size > 0) {
+		ds1685_rtc_switch_to_bank1(rtc);
+
+#ifndef CONFIG_RTC_DRV_DS1685
+		/* Enable burst-mode on DS17x85/DS17x87 */
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4A) |
+			    RTC_CTRL_4A_BME));
+
+		/* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
+		 * reading with burst-mode */
+		rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
+			   (pos - NVRAM_TOTAL_SZ_BANK0));
+#endif
+
+		/* Read NVRAM in bank1 registers. */
+		for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
+		     count++, size--) {
+#ifdef CONFIG_RTC_DRV_DS1685
+			/* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
+			 * before each read. */
+			rtc->write(rtc, RTC_BANK1_RAM_ADDR,
+				   (pos - NVRAM_TOTAL_SZ_BANK0));
+#endif
+			*buf++ = rtc->read(rtc, RTC_BANK1_RAM_DATA_PORT);
+			pos++;
+		}
+
+#ifndef CONFIG_RTC_DRV_DS1685
+		/* Disable burst-mode on DS17x85/DS17x87 */
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
+			    ~(RTC_CTRL_4A_BME)));
+#endif
+		ds1685_rtc_switch_to_bank0(rtc);
+	}
+#endif /* !CONFIG_RTC_DRV_DS1689 */
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	/*
+	 * XXX: Bug? this appears to cause the function to get executed
+	 * several times in succession.  But it's the only way to actually get
+	 * data written out to a file.
+	 */
+	return count;
+}
+
+/**
+ * ds1685_rtc_sysfs_nvram_write - writes rtc nvram via sysfs.
+ * @file: pointer to file structure.
+ * @kobj: pointer to kobject structure.
+ * @bin_attr: pointer to bin_attribute structure.
+ * @buf: pointer to char array to hold the input.
+ * @pos: current file position pointer.
+ * @size: size of the data to write.
+ */
+static ssize_t
+ds1685_rtc_sysfs_nvram_write(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr, char *buf,
+			     loff_t pos, size_t size)
+{
+	struct platform_device *pdev =
+		to_platform_device(container_of(kobj, struct device, kobj));
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	ssize_t count;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	/* Write NVRAM in time and bank0 registers. */
+	for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
+	     count++, size--)
+		if (count < NVRAM_SZ_TIME)
+			rtc->write(rtc, (NVRAM_TIME_BASE + pos++),
+				   *buf++);
+		else
+			rtc->write(rtc, (NVRAM_BANK0_BASE), *buf++);
+
+#ifndef CONFIG_RTC_DRV_DS1689
+	if (size > 0) {
+		ds1685_rtc_switch_to_bank1(rtc);
+
+#ifndef CONFIG_RTC_DRV_DS1685
+		/* Enable burst-mode on DS17x85/DS17x87 */
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4A) |
+			    RTC_CTRL_4A_BME));
+
+		/* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
+		 * writing with burst-mode */
+		rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
+			   (pos - NVRAM_TOTAL_SZ_BANK0));
+#endif
+
+		/* Write NVRAM in bank1 registers. */
+		for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
+		     count++, size--) {
+#ifdef CONFIG_RTC_DRV_DS1685
+			/* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
+			 * before each read. */
+			rtc->write(rtc, RTC_BANK1_RAM_ADDR,
+				   (pos - NVRAM_TOTAL_SZ_BANK0));
+#endif
+			rtc->write(rtc, RTC_BANK1_RAM_DATA_PORT, *buf++);
+			pos++;
+		}
+
+#ifndef CONFIG_RTC_DRV_DS1685
+		/* Disable burst-mode on DS17x85/DS17x87 */
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
+			    ~(RTC_CTRL_4A_BME)));
+#endif
+		ds1685_rtc_switch_to_bank0(rtc);
+	}
+#endif /* !CONFIG_RTC_DRV_DS1689 */
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return count;
+}
+
+/**
+ * struct ds1685_rtc_sysfs_nvram_attr - sysfs attributes for rtc nvram.
+ * @attr: nvram attributes.
+ * @read: nvram read function.
+ * @write: nvram write function.
+ * @size: nvram total size (bank0 + extended).
+ */
+static struct bin_attribute
+ds1685_rtc_sysfs_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.read = ds1685_rtc_sysfs_nvram_read,
+	.write = ds1685_rtc_sysfs_nvram_write,
+	.size = NVRAM_TOTAL_SZ
+};
+
+/**
+ * ds1685_rtc_sysfs_battery_show - sysfs file for main battery status.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ */
+static ssize_t
+ds1685_rtc_sysfs_battery_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrld;
+
+	ctrld = rtc->read(rtc, RTC_CTRL_D);
+
+	return sprintf(buf, "%s\n",
+			(ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
+}
+static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
+
+/**
+ * ds1685_rtc_sysfs_auxbatt_show - sysfs file for aux battery status.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ */
+static ssize_t
+ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ctrl4a;
+
+	ds1685_rtc_switch_to_bank1(rtc);
+	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	return sprintf(buf, "%s\n",
+			(ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
+}
+static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
+
+/**
+ * ds1685_rtc_sysfs_serial_show - sysfs file for silicon serial number.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ */
+static ssize_t
+ds1685_rtc_sysfs_serial_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+	u8 ssn[8];
+
+	ds1685_rtc_switch_to_bank1(rtc);
+	ds1685_rtc_get_ssn(rtc, ssn);
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	return sprintf(buf, "%8phC\n", ssn);
+}
+static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
+
+/**
+ * struct ds1685_rtc_sysfs_misc_attrs - list for misc RTC features.
+ */
+static struct attribute*
+ds1685_rtc_sysfs_misc_attrs[] = {
+	&dev_attr_battery.attr,
+	&dev_attr_auxbatt.attr,
+	&dev_attr_serial.attr,
+	NULL,
+};
+
+/**
+ * struct ds1685_rtc_sysfs_misc_grp - attr group for misc RTC features.
+ */
+static const struct attribute_group
+ds1685_rtc_sysfs_misc_grp = {
+	.name = "misc",
+	.attrs = ds1685_rtc_sysfs_misc_attrs,
+};
+
+#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
+/**
+ * struct ds1685_rtc_ctrl_regs.
+ * @name: char pointer for the bit name.
+ * @reg: control register the bit is in.
+ * @bit: the bit's offset in the register.
+ */
+struct ds1685_rtc_ctrl_regs {
+	const char *name;
+	const u8 reg;
+	const u8 bit;
+};
+
+/*
+ * Ctrl register bit lookup table.
+ */
+static const struct ds1685_rtc_ctrl_regs
+ds1685_ctrl_regs_table[] = {
+	{ "uip",  RTC_CTRL_A,      RTC_CTRL_A_UIP   },
+	{ "dv2",  RTC_CTRL_A,      RTC_CTRL_A_DV2   },
+	{ "dv1",  RTC_CTRL_A,      RTC_CTRL_A_DV1   },
+	{ "dv0",  RTC_CTRL_A,      RTC_CTRL_A_DV0   },
+	{ "rs3",  RTC_CTRL_A,      RTC_CTRL_A_RS3   },
+	{ "rs2",  RTC_CTRL_A,      RTC_CTRL_A_RS2   },
+	{ "rs1",  RTC_CTRL_A,      RTC_CTRL_A_RS1   },
+	{ "rs0",  RTC_CTRL_A,      RTC_CTRL_A_RS0   },
+	{ "set",  RTC_CTRL_B,      RTC_CTRL_B_SET   },
+	{ "pie",  RTC_CTRL_B,      RTC_CTRL_B_PIE   },
+	{ "aie",  RTC_CTRL_B,      RTC_CTRL_B_AIE   },
+	{ "uie",  RTC_CTRL_B,      RTC_CTRL_B_UIE   },
+	{ "sqwe", RTC_CTRL_B,      RTC_CTRL_B_SQWE  },
+	{ "dm",   RTC_CTRL_B,      RTC_CTRL_B_DM    },
+	{ "2412", RTC_CTRL_B,      RTC_CTRL_B_2412  },
+	{ "dse",  RTC_CTRL_B,      RTC_CTRL_B_DSE   },
+	{ "irqf", RTC_CTRL_C,      RTC_CTRL_C_IRQF  },
+	{ "pf",   RTC_CTRL_C,      RTC_CTRL_C_PF    },
+	{ "af",   RTC_CTRL_C,      RTC_CTRL_C_AF    },
+	{ "uf",   RTC_CTRL_C,      RTC_CTRL_C_UF    },
+	{ "vrt",  RTC_CTRL_D,      RTC_CTRL_D_VRT   },
+	{ "vrt2", RTC_EXT_CTRL_4A, RTC_CTRL_4A_VRT2 },
+	{ "incr", RTC_EXT_CTRL_4A, RTC_CTRL_4A_INCR },
+	{ "pab",  RTC_EXT_CTRL_4A, RTC_CTRL_4A_PAB  },
+	{ "rf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_RF   },
+	{ "wf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_WF   },
+	{ "kf",   RTC_EXT_CTRL_4A, RTC_CTRL_4A_KF   },
+#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
+	{ "bme",  RTC_EXT_CTRL_4A, RTC_CTRL_4A_BME  },
+#endif
+	{ "abe",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_ABE  },
+	{ "e32k", RTC_EXT_CTRL_4B, RTC_CTRL_4B_E32K },
+	{ "cs",   RTC_EXT_CTRL_4B, RTC_CTRL_4B_CS   },
+	{ "rce",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_RCE  },
+	{ "prs",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_PRS  },
+	{ "rie",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_RIE  },
+	{ "wie",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_WIE  },
+	{ "kse",  RTC_EXT_CTRL_4B, RTC_CTRL_4B_KSE  },
+	{ NULL,   0,               0                },
+};
+
+/**
+ * ds1685_rtc_sysfs_ctrl_regs_lookup - ctrl register bit lookup function.
+ * @name: ctrl register bit to look up in ds1685_ctrl_regs_table.
+ */
+static const struct ds1685_rtc_ctrl_regs*
+ds1685_rtc_sysfs_ctrl_regs_lookup(const char *name)
+{
+	const struct ds1685_rtc_ctrl_regs *p = ds1685_ctrl_regs_table;
+
+	for (; p->name != NULL; ++p)
+		if (strcmp(p->name, name) == 0)
+			return p;
+
+	return NULL;
+}
+
+/**
+ * ds1685_rtc_sysfs_ctrl_regs_show - reads a ctrl register bit via sysfs.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ */
+static ssize_t
+ds1685_rtc_sysfs_ctrl_regs_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u8 tmp;
+	struct ds1685_priv *rtc = dev_get_drvdata(dev);
+	const struct ds1685_rtc_ctrl_regs *reg_info =
+		ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
+
+	/* Make sure we actually matched something. */
+	if (!reg_info)
+		return -EINVAL;
+
+	/* No spinlock during a read -- mutex is already held. */
+	ds1685_rtc_switch_to_bank1(rtc);
+	tmp = rtc->read(rtc, reg_info->reg) & reg_info->bit;
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	return sprintf(buf, "%d\n", (tmp ? 1 : 0));
+}
+
+/**
+ * ds1685_rtc_sysfs_ctrl_regs_store - writes a ctrl register bit via sysfs.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ * @count: number of bytes written.
+ */
+static ssize_t
+ds1685_rtc_sysfs_ctrl_regs_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct ds1685_priv *rtc = dev_get_drvdata(dev);
+	u8 reg = 0, bit = 0, tmp;
+	unsigned long flags;
+	long int val = 0;
+	const struct ds1685_rtc_ctrl_regs *reg_info =
+		ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
+
+	/* We only accept numbers. */
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	/* bits are binary, 0 or 1 only. */
+	if ((val != 0) && (val != 1))
+		return -ERANGE;
+
+	/* Make sure we actually matched something. */
+	if (!reg_info)
+		return -EINVAL;
+
+	reg = reg_info->reg;
+	bit = reg_info->bit;
+
+	/* Safe to spinlock during a write. */
+	ds1685_rtc_begin_ctrl_access(rtc, &flags);
+	tmp = rtc->read(rtc, reg);
+	rtc->write(rtc, reg, (val ? (tmp | bit) : (tmp & ~(bit))));
+	ds1685_rtc_end_ctrl_access(rtc, flags);
+
+	return count;
+}
+
+/**
+ * DS1685_RTC_SYSFS_CTRL_REG_RO - device_attribute for read-only register bit.
+ * @bit: bit to read.
+ */
+#define DS1685_RTC_SYSFS_CTRL_REG_RO(bit)				\
+	static DEVICE_ATTR(bit, S_IRUGO,				\
+	ds1685_rtc_sysfs_ctrl_regs_show, NULL)
+
+/**
+ * DS1685_RTC_SYSFS_CTRL_REG_RW - device_attribute for read-write register bit.
+ * @bit: bit to read or write.
+ */
+#define DS1685_RTC_SYSFS_CTRL_REG_RW(bit)				\
+	static DEVICE_ATTR(bit, S_IRUGO | S_IWUSR,			\
+	ds1685_rtc_sysfs_ctrl_regs_show,				\
+	ds1685_rtc_sysfs_ctrl_regs_store)
+
+/*
+ * Control Register A bits.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RO(uip);
+DS1685_RTC_SYSFS_CTRL_REG_RW(dv2);
+DS1685_RTC_SYSFS_CTRL_REG_RW(dv1);
+DS1685_RTC_SYSFS_CTRL_REG_RO(dv0);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rs3);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rs2);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rs1);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rs0);
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrla_attrs[] = {
+	&dev_attr_uip.attr,
+	&dev_attr_dv2.attr,
+	&dev_attr_dv1.attr,
+	&dev_attr_dv0.attr,
+	&dev_attr_rs3.attr,
+	&dev_attr_rs2.attr,
+	&dev_attr_rs1.attr,
+	&dev_attr_rs0.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrla_grp = {
+	.name = "ctrla",
+	.attrs = ds1685_rtc_sysfs_ctrla_attrs,
+};
+
+
+/*
+ * Control Register B bits.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RO(set);
+DS1685_RTC_SYSFS_CTRL_REG_RW(pie);
+DS1685_RTC_SYSFS_CTRL_REG_RW(aie);
+DS1685_RTC_SYSFS_CTRL_REG_RW(uie);
+DS1685_RTC_SYSFS_CTRL_REG_RW(sqwe);
+DS1685_RTC_SYSFS_CTRL_REG_RO(dm);
+DS1685_RTC_SYSFS_CTRL_REG_RO(2412);
+DS1685_RTC_SYSFS_CTRL_REG_RO(dse);
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrlb_attrs[] = {
+	&dev_attr_set.attr,
+	&dev_attr_pie.attr,
+	&dev_attr_aie.attr,
+	&dev_attr_uie.attr,
+	&dev_attr_sqwe.attr,
+	&dev_attr_dm.attr,
+	&dev_attr_2412.attr,
+	&dev_attr_dse.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrlb_grp = {
+	.name = "ctrlb",
+	.attrs = ds1685_rtc_sysfs_ctrlb_attrs,
+};
+
+/*
+ * Control Register C bits.
+ *
+ * Reading Control C clears these bits!  Reading them individually can
+ * possibly cause an interrupt to be missed.  Use the /proc interface
+ * to see all the bits in this register simultaneously.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RO(irqf);
+DS1685_RTC_SYSFS_CTRL_REG_RO(pf);
+DS1685_RTC_SYSFS_CTRL_REG_RO(af);
+DS1685_RTC_SYSFS_CTRL_REG_RO(uf);
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrlc_attrs[] = {
+	&dev_attr_irqf.attr,
+	&dev_attr_pf.attr,
+	&dev_attr_af.attr,
+	&dev_attr_uf.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrlc_grp = {
+	.name = "ctrlc",
+	.attrs = ds1685_rtc_sysfs_ctrlc_attrs,
+};
+
+/*
+ * Control Register D bits.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RO(vrt);
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrld_attrs[] = {
+	&dev_attr_vrt.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrld_grp = {
+	.name = "ctrld",
+	.attrs = ds1685_rtc_sysfs_ctrld_attrs,
+};
+
+/*
+ * Control Register 4A bits.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RO(vrt2);
+DS1685_RTC_SYSFS_CTRL_REG_RO(incr);
+DS1685_RTC_SYSFS_CTRL_REG_RW(pab);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rf);
+DS1685_RTC_SYSFS_CTRL_REG_RW(wf);
+DS1685_RTC_SYSFS_CTRL_REG_RW(kf);
+#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
+DS1685_RTC_SYSFS_CTRL_REG_RO(bme);
+#endif
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrl4a_attrs[] = {
+	&dev_attr_vrt2.attr,
+	&dev_attr_incr.attr,
+	&dev_attr_pab.attr,
+	&dev_attr_rf.attr,
+	&dev_attr_wf.attr,
+	&dev_attr_kf.attr,
+#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
+	&dev_attr_bme.attr,
+#endif
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrl4a_grp = {
+	.name = "ctrl4a",
+	.attrs = ds1685_rtc_sysfs_ctrl4a_attrs,
+};
+
+/*
+ * Control Register 4B bits.
+ */
+DS1685_RTC_SYSFS_CTRL_REG_RW(abe);
+DS1685_RTC_SYSFS_CTRL_REG_RW(e32k);
+DS1685_RTC_SYSFS_CTRL_REG_RO(cs);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rce);
+DS1685_RTC_SYSFS_CTRL_REG_RW(prs);
+DS1685_RTC_SYSFS_CTRL_REG_RW(rie);
+DS1685_RTC_SYSFS_CTRL_REG_RW(wie);
+DS1685_RTC_SYSFS_CTRL_REG_RW(kse);
+
+static struct attribute*
+ds1685_rtc_sysfs_ctrl4b_attrs[] = {
+	&dev_attr_abe.attr,
+	&dev_attr_e32k.attr,
+	&dev_attr_cs.attr,
+	&dev_attr_rce.attr,
+	&dev_attr_prs.attr,
+	&dev_attr_rie.attr,
+	&dev_attr_wie.attr,
+	&dev_attr_kse.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_ctrl4b_grp = {
+	.name = "ctrl4b",
+	.attrs = ds1685_rtc_sysfs_ctrl4b_attrs,
+};
+
+
+/**
+ * struct ds1685_rtc_ctrl_regs.
+ * @name: char pointer for the bit name.
+ * @reg: control register the bit is in.
+ * @bit: the bit's offset in the register.
+ */
+struct ds1685_rtc_time_regs {
+	const char *name;
+	const u8 reg;
+	const u8 mask;
+	const u8 min;
+	const u8 max;
+};
+
+/*
+ * Time/Date register lookup tables.
+ */
+static const struct ds1685_rtc_time_regs
+ds1685_time_regs_bcd_table[] = {
+	{ "seconds",       RTC_SECS,       RTC_SECS_BCD_MASK,   0, 59 },
+	{ "minutes",       RTC_MINS,       RTC_MINS_BCD_MASK,   0, 59 },
+	{ "hours",         RTC_HRS,        RTC_HRS_24_BCD_MASK, 0, 23 },
+	{ "wday",          RTC_WDAY,       RTC_WDAY_MASK,       1,  7 },
+	{ "mday",          RTC_MDAY,       RTC_MDAY_BCD_MASK,   1, 31 },
+	{ "month",         RTC_MONTH,      RTC_MONTH_BCD_MASK,  1, 12 },
+	{ "year",          RTC_YEAR,       RTC_YEAR_BCD_MASK,   0, 99 },
+	{ "century",       RTC_CENTURY,    RTC_CENTURY_MASK,    0, 99 },
+	{ "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BCD_MASK,   0, 59 },
+	{ "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BCD_MASK,   0, 59 },
+	{ "alarm_hours",   RTC_HRS_ALARM,  RTC_HRS_24_BCD_MASK, 0, 23 },
+	{ "alarm_mday",    RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 1, 31 },
+	{ NULL,            0,              0,                   0,  0 },
+};
+
+static const struct ds1685_rtc_time_regs
+ds1685_time_regs_bin_table[] = {
+	{ "seconds",       RTC_SECS,       RTC_SECS_BIN_MASK,   0x00, 0x3b },
+	{ "minutes",       RTC_MINS,       RTC_MINS_BIN_MASK,   0x00, 0x3b },
+	{ "hours",         RTC_HRS,        RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
+	{ "wday",          RTC_WDAY,       RTC_WDAY_MASK,       0x01, 0x07 },
+	{ "mday",          RTC_MDAY,       RTC_MDAY_BIN_MASK,   0x01, 0x1f },
+	{ "month",         RTC_MONTH,      RTC_MONTH_BIN_MASK,  0x01, 0x0c },
+	{ "year",          RTC_YEAR,       RTC_YEAR_BIN_MASK,   0x00, 0x63 },
+	{ "century",       RTC_CENTURY,    RTC_CENTURY_MASK,    0x00, 0x63 },
+	{ "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BIN_MASK,   0x00, 0x3b },
+	{ "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BIN_MASK,   0x00, 0x3b },
+	{ "alarm_hours",   RTC_HRS_ALARM,  RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
+	{ "alarm_mday",    RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 0x01, 0x1f },
+	{ NULL,            0,              0,                   0x00, 0x00 },
+};
+
+/**
+ * ds1685_rtc_sysfs_time_regs_bcd_lookup - time/date reg bit lookup function.
+ * @name: register bit to look up in ds1685_time_regs_bcd_table.
+ */
+static const struct ds1685_rtc_time_regs*
+ds1685_rtc_sysfs_time_regs_lookup(const char *name, bool bcd_mode)
+{
+	const struct ds1685_rtc_time_regs *p;
+
+	if (bcd_mode)
+		p = ds1685_time_regs_bcd_table;
+	else
+		p = ds1685_time_regs_bin_table;
+
+	for (; p->name != NULL; ++p)
+		if (strcmp(p->name, name) == 0)
+			return p;
+
+	return NULL;
+}
+
+/**
+ * ds1685_rtc_sysfs_time_regs_show - reads a time/date register via sysfs.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ */
+static ssize_t
+ds1685_rtc_sysfs_time_regs_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u8 tmp;
+	struct ds1685_priv *rtc = dev_get_drvdata(dev);
+	const struct ds1685_rtc_time_regs *bcd_reg_info =
+		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
+	const struct ds1685_rtc_time_regs *bin_reg_info =
+		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
+
+	/* Make sure we actually matched something. */
+	if (!bcd_reg_info || !bin_reg_info)
+		return -EINVAL;
+
+	/* bcd_reg_info->reg == bin_reg_info->reg. */
+	ds1685_rtc_begin_data_access(rtc);
+	tmp = rtc->read(rtc, bcd_reg_info->reg);
+	ds1685_rtc_end_data_access(rtc);
+
+	tmp = ds1685_rtc_bcd2bin(rtc, tmp, bcd_reg_info->mask,
+				 bin_reg_info->mask);
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+/**
+ * ds1685_rtc_sysfs_time_regs_store - writes a time/date register via sysfs.
+ * @dev: pointer to device structure.
+ * @attr: pointer to device_attribute structure.
+ * @buf: pointer to char array to hold the output.
+ * @count: number of bytes written.
+ */
+static ssize_t
+ds1685_rtc_sysfs_time_regs_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	long int val = 0;
+	struct ds1685_priv *rtc = dev_get_drvdata(dev);
+	const struct ds1685_rtc_time_regs *bcd_reg_info =
+		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
+	const struct ds1685_rtc_time_regs *bin_reg_info =
+		ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
+
+	/* We only accept numbers. */
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	/* Make sure we actually matched something. */
+	if (!bcd_reg_info || !bin_reg_info)
+		return -EINVAL;
+
+	/* Check for a valid range. */
+	if (rtc->bcd_mode) {
+		if ((val < bcd_reg_info->min) || (val > bcd_reg_info->max))
+			return -ERANGE;
+	} else {
+		if ((val < bin_reg_info->min) || (val > bin_reg_info->max))
+			return -ERANGE;
+	}
+
+	val = ds1685_rtc_bin2bcd(rtc, val, bin_reg_info->mask,
+				 bcd_reg_info->mask);
+
+	/* bcd_reg_info->reg == bin_reg_info->reg. */
+	ds1685_rtc_begin_data_access(rtc);
+	rtc->write(rtc, bcd_reg_info->reg, val);
+	ds1685_rtc_end_data_access(rtc);
+
+	return count;
+}
+
+/**
+ * DS1685_RTC_SYSFS_REG_RW - device_attribute for a read-write time register.
+ * @reg: time/date register to read or write.
+ */
+#define DS1685_RTC_SYSFS_TIME_REG_RW(reg)				\
+	static DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,			\
+	ds1685_rtc_sysfs_time_regs_show,				\
+	ds1685_rtc_sysfs_time_regs_store)
+
+/*
+ * Time/Date Register bits.
+ */
+DS1685_RTC_SYSFS_TIME_REG_RW(seconds);
+DS1685_RTC_SYSFS_TIME_REG_RW(minutes);
+DS1685_RTC_SYSFS_TIME_REG_RW(hours);
+DS1685_RTC_SYSFS_TIME_REG_RW(wday);
+DS1685_RTC_SYSFS_TIME_REG_RW(mday);
+DS1685_RTC_SYSFS_TIME_REG_RW(month);
+DS1685_RTC_SYSFS_TIME_REG_RW(year);
+DS1685_RTC_SYSFS_TIME_REG_RW(century);
+DS1685_RTC_SYSFS_TIME_REG_RW(alarm_seconds);
+DS1685_RTC_SYSFS_TIME_REG_RW(alarm_minutes);
+DS1685_RTC_SYSFS_TIME_REG_RW(alarm_hours);
+DS1685_RTC_SYSFS_TIME_REG_RW(alarm_mday);
+
+static struct attribute*
+ds1685_rtc_sysfs_time_attrs[] = {
+	&dev_attr_seconds.attr,
+	&dev_attr_minutes.attr,
+	&dev_attr_hours.attr,
+	&dev_attr_wday.attr,
+	&dev_attr_mday.attr,
+	&dev_attr_month.attr,
+	&dev_attr_year.attr,
+	&dev_attr_century.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_time_grp = {
+	.name = "datetime",
+	.attrs = ds1685_rtc_sysfs_time_attrs,
+};
+
+static struct attribute*
+ds1685_rtc_sysfs_alarm_attrs[] = {
+	&dev_attr_alarm_seconds.attr,
+	&dev_attr_alarm_minutes.attr,
+	&dev_attr_alarm_hours.attr,
+	&dev_attr_alarm_mday.attr,
+	NULL,
+};
+
+static const struct attribute_group
+ds1685_rtc_sysfs_alarm_grp = {
+	.name = "alarm",
+	.attrs = ds1685_rtc_sysfs_alarm_attrs,
+};
+#endif /* CONFIG_RTC_DS1685_SYSFS_REGS */
+
+
+/**
+ * ds1685_rtc_sysfs_register - register sysfs files.
+ * @dev: pointer to device structure.
+ */
+static int
+ds1685_rtc_sysfs_register(struct device *dev)
+{
+	int ret = 0;
+
+	sysfs_bin_attr_init(&ds1685_rtc_sysfs_nvram_attr);
+	ret = sysfs_create_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
+	if (ret)
+		return ret;
+#endif
+	return 0;
+}
+
+/**
+ * ds1685_rtc_sysfs_unregister - unregister sysfs files.
+ * @dev: pointer to device structure.
+ */
+static int
+ds1685_rtc_sysfs_unregister(struct device *dev)
+{
+	sysfs_remove_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
+
+#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
+	sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SYSFS */
+
+
+
+/* ----------------------------------------------------------------------- */
+/* Driver Probe/Removal */
+
+/**
+ * ds1685_rtc_probe - initializes rtc driver.
+ * @pdev: pointer to platform_device structure.
+ */
+static int
+ds1685_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc_dev;
+	struct resource *res;
+	struct ds1685_priv *rtc;
+	struct ds1685_rtc_platform_data *pdata;
+	u8 ctrla, ctrlb, hours;
+	unsigned char am_pm;
+	int ret = 0;
+
+	/* Get the platform data. */
+	pdata = (struct ds1685_rtc_platform_data *) pdev->dev.platform_data;
+	if (!pdata)
+		return -ENODEV;
+
+	/* Allocate memory for the rtc device. */
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	/*
+	 * Allocate/setup any IORESOURCE_MEM resources, if required.  Not all
+	 * platforms put the RTC in an easy-access place.  Like the SGI Octane,
+	 * which attaches the RTC to a "ByteBus", hooked to a SuperIO chip
+	 * that sits behind the IOC3 PCI metadevice.
+	 */
+	if (pdata->alloc_io_resources) {
+		/* Get the platform resources. */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return -ENXIO;
+		rtc->size = resource_size(res);
+
+		/* Request a memory region. */
+		/* XXX: mmio-only for now. */
+		if (!devm_request_mem_region(&pdev->dev, res->start, rtc->size,
+					     pdev->name))
+			return -EBUSY;
+
+		/*
+		 * Set the base address for the rtc, and ioremap its
+		 * registers.
+		 */
+		rtc->baseaddr = res->start;
+		rtc->regs = devm_ioremap(&pdev->dev, res->start, rtc->size);
+		if (!rtc->regs)
+			return -ENOMEM;
+	}
+	rtc->alloc_io_resources = pdata->alloc_io_resources;
+
+	/* Get the register step size. */
+	if (pdata->regstep > 0)
+		rtc->regstep = pdata->regstep;
+	else
+		rtc->regstep = 1;
+
+	/* Platform read function, else default if mmio setup */
+	if (pdata->plat_read)
+		rtc->read = pdata->plat_read;
+	else
+		if (pdata->alloc_io_resources)
+			rtc->read = ds1685_read;
+		else
+			return -ENXIO;
+
+	/* Platform write function, else default if mmio setup */
+	if (pdata->plat_write)
+		rtc->write = pdata->plat_write;
+	else
+		if (pdata->alloc_io_resources)
+			rtc->write = ds1685_write;
+		else
+			return -ENXIO;
+
+	/* Platform pre-shutdown function, if defined. */
+	if (pdata->plat_prepare_poweroff)
+		rtc->prepare_poweroff = pdata->plat_prepare_poweroff;
+
+	/* Platform wake_alarm function, if defined. */
+	if (pdata->plat_wake_alarm)
+		rtc->wake_alarm = pdata->plat_wake_alarm;
+
+	/* Platform post_ram_clear function, if defined. */
+	if (pdata->plat_post_ram_clear)
+		rtc->post_ram_clear = pdata->plat_post_ram_clear;
+
+	/* Init the spinlock, workqueue, & set the driver data. */
+	spin_lock_init(&rtc->lock);
+	INIT_WORK(&rtc->work, ds1685_rtc_work_queue);
+	platform_set_drvdata(pdev, rtc);
+
+	/* Turn the oscillator on if is not already on (DV1 = 1). */
+	ctrla = rtc->read(rtc, RTC_CTRL_A);
+	if (!(ctrla & RTC_CTRL_A_DV1))
+		ctrla |= RTC_CTRL_A_DV1;
+
+	/* Enable the countdown chain (DV2 = 0) */
+	ctrla &= ~(RTC_CTRL_A_DV2);
+
+	/* Clear RS3-RS0 in Control A. */
+	ctrla &= ~(RTC_CTRL_A_RS_MASK);
+
+	/*
+	 * All done with Control A.  Switch to Bank 1 for the remainder of
+	 * the RTC setup so we have access to the extended functions.
+	 */
+	ctrla |= RTC_CTRL_A_DV0;
+	rtc->write(rtc, RTC_CTRL_A, ctrla);
+
+	/* Default to 32768kHz output. */
+	rtc->write(rtc, RTC_EXT_CTRL_4B,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_E32K));
+
+	/* Set the SET bit in Control B so we can do some housekeeping. */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
+
+	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
+	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
+		cpu_relax();
+
+	/*
+	 * If the platform supports BCD mode, then set DM=0 in Control B.
+	 * Otherwise, set DM=1 for BIN mode.
+	 */
+	ctrlb = rtc->read(rtc, RTC_CTRL_B);
+	if (pdata->bcd_mode)
+		ctrlb &= ~(RTC_CTRL_B_DM);
+	else
+		ctrlb |= RTC_CTRL_B_DM;
+	rtc->bcd_mode = pdata->bcd_mode;
+
+	/*
+	 * Disable Daylight Savings Time (DSE = 0).
+	 * The RTC has hardcoded timezone information that is rendered
+	 * obselete.  We'll let the OS deal with DST settings instead.
+	 */
+	if (ctrlb & RTC_CTRL_B_DSE)
+		ctrlb &= ~(RTC_CTRL_B_DSE);
+
+	/* Force 24-hour mode (2412 = 1). */
+	if (!(ctrlb & RTC_CTRL_B_2412)) {
+		/* Reinitialize the time hours. */
+		hours = rtc->read(rtc, RTC_HRS);
+		am_pm = hours & RTC_HRS_AMPM_MASK;
+		hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
+					   RTC_HRS_12_BIN_MASK);
+		hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
+
+		/* Enable 24-hour mode. */
+		ctrlb |= RTC_CTRL_B_2412;
+
+		/* Write back to Control B, including DM & DSE bits. */
+		rtc->write(rtc, RTC_CTRL_B, ctrlb);
+
+		/* Write the time hours back. */
+		rtc->write(rtc, RTC_HRS,
+			   ds1685_rtc_bin2bcd(rtc, hours,
+					      RTC_HRS_24_BIN_MASK,
+					      RTC_HRS_24_BCD_MASK));
+
+		/* Reinitialize the alarm hours. */
+		hours = rtc->read(rtc, RTC_HRS_ALARM);
+		am_pm = hours & RTC_HRS_AMPM_MASK;
+		hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
+					   RTC_HRS_12_BIN_MASK);
+		hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
+
+		/* Write the alarm hours back. */
+		rtc->write(rtc, RTC_HRS_ALARM,
+			   ds1685_rtc_bin2bcd(rtc, hours,
+					      RTC_HRS_24_BIN_MASK,
+					      RTC_HRS_24_BCD_MASK));
+	} else {
+		/* 24-hour mode is already set, so write Control B back. */
+		rtc->write(rtc, RTC_CTRL_B, ctrlb);
+	}
+
+	/* Unset the SET bit in Control B so the RTC can update. */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
+
+	/* Check the main battery. */
+	if (!(rtc->read(rtc, RTC_CTRL_D) & RTC_CTRL_D_VRT))
+		dev_warn(&pdev->dev,
+			 "Main battery is exhausted! RTC may be invalid!\n");
+
+	/* Check the auxillary battery.  It is optional. */
+	if (!(rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_VRT2))
+		dev_warn(&pdev->dev,
+			 "Aux battery is exhausted or not available.\n");
+
+	/* Read Ctrl B and clear PIE/AIE/UIE. */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_PAU_MASK)));
+
+	/* Reading Ctrl C auto-clears PF/AF/UF. */
+	rtc->read(rtc, RTC_CTRL_C);
+
+	/* Read Ctrl 4B and clear RIE/WIE/KSE. */
+	rtc->write(rtc, RTC_EXT_CTRL_4B,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4B) & ~(RTC_CTRL_4B_RWK_MASK)));
+
+	/* Clear RF/WF/KF in Ctrl 4A. */
+	rtc->write(rtc, RTC_EXT_CTRL_4A,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4A) & ~(RTC_CTRL_4A_RWK_MASK)));
+
+	/*
+	 * Re-enable KSE to handle power button events.  We do not enable
+	 * WIE or RIE by default.
+	 */
+	rtc->write(rtc, RTC_EXT_CTRL_4B,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_KSE));
+
+	/*
+	 * Fetch the IRQ and setup the interrupt handler.
+	 *
+	 * Not all platforms have the IRQF pin tied to something.  If not, the
+	 * RTC will still set the *IE / *F flags and raise IRQF in ctrlc, but
+	 * there won't be an automatic way of notifying the kernel about it,
+	 * unless ctrlc is explicitly polled.
+	 */
+	if (!pdata->no_irq) {
+		ret = platform_get_irq(pdev, 0);
+		if (ret > 0) {
+			rtc->irq_num = ret;
+
+			/* Request an IRQ. */
+			ret = devm_request_irq(&pdev->dev, rtc->irq_num,
+					       ds1685_rtc_irq_handler,
+					       IRQF_SHARED, pdev->name, pdev);
+
+			/* Check to see if something came back. */
+			if (unlikely(ret)) {
+				dev_warn(&pdev->dev,
+					 "RTC interrupt not available\n");
+				rtc->irq_num = 0;
+			}
+		} else
+			return ret;
+	}
+	rtc->no_irq = pdata->no_irq;
+
+	/* Setup complete. */
+	ds1685_rtc_switch_to_bank0(rtc);
+
+	/* Register the device as an RTC. */
+	rtc_dev = rtc_device_register(pdev->name, &pdev->dev,
+				      &ds1685_rtc_ops, THIS_MODULE);
+
+	/* Success? */
+	if (IS_ERR(rtc_dev))
+		return PTR_ERR(rtc_dev);
+
+	/* Maximum periodic rate is 8192Hz (0.122070ms). */
+	rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
+
+	/* See if the platform doesn't support UIE. */
+	if (pdata->uie_unsupported)
+		rtc_dev->uie_unsupported = 1;
+	rtc->uie_unsupported = pdata->uie_unsupported;
+
+	rtc->dev = rtc_dev;
+
+#ifdef CONFIG_SYSFS
+	ret = ds1685_rtc_sysfs_register(&pdev->dev);
+	if (ret)
+		rtc_device_unregister(rtc->dev);
+#endif
+
+	/* Done! */
+	return ret;
+}
+
+/**
+ * ds1685_rtc_remove - removes rtc driver.
+ * @pdev: pointer to platform_device structure.
+ */
+static int
+ds1685_rtc_remove(struct platform_device *pdev)
+{
+	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
+
+#ifdef CONFIG_SYSFS
+	ds1685_rtc_sysfs_unregister(&pdev->dev);
+#endif
+
+	rtc_device_unregister(rtc->dev);
+
+	/* Read Ctrl B and clear PIE/AIE/UIE. */
+	rtc->write(rtc, RTC_CTRL_B,
+		   (rtc->read(rtc, RTC_CTRL_B) &
+		    ~(RTC_CTRL_B_PAU_MASK)));
+
+	/* Reading Ctrl C auto-clears PF/AF/UF. */
+	rtc->read(rtc, RTC_CTRL_C);
+
+	/* Read Ctrl 4B and clear RIE/WIE/KSE. */
+	rtc->write(rtc, RTC_EXT_CTRL_4B,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4B) &
+		    ~(RTC_CTRL_4B_RWK_MASK)));
+
+	/* Manually clear RF/WF/KF in Ctrl 4A. */
+	rtc->write(rtc, RTC_EXT_CTRL_4A,
+		   (rtc->read(rtc, RTC_EXT_CTRL_4A) &
+		    ~(RTC_CTRL_4A_RWK_MASK)));
+
+	cancel_work_sync(&rtc->work);
+
+	return 0;
+}
+
+/**
+ * ds1685_rtc_driver - rtc driver properties.
+ */
+static struct platform_driver ds1685_rtc_driver = {
+	.driver		= {
+		.name	= "rtc-ds1685",
+	},
+	.probe		= ds1685_rtc_probe,
+	.remove		= ds1685_rtc_remove,
+};
+module_platform_driver(ds1685_rtc_driver);
+/* ----------------------------------------------------------------------- */
+
+
+/* ----------------------------------------------------------------------- */
+/* Poweroff function */
+
+/**
+ * ds1685_rtc_poweroff - uses the RTC chip to power the system off.
+ * @pdev: pointer to platform_device structure.
+ */
+void __noreturn
+ds1685_rtc_poweroff(struct platform_device *pdev)
+{
+	u8 ctrla, ctrl4a, ctrl4b;
+	struct ds1685_priv *rtc;
+
+	/* Check for valid RTC data, else, spin forever. */
+	if (unlikely(!pdev)) {
+		pr_emerg("platform device data not available, spinning forever ...\n");
+		while(1);
+		unreachable();
+	} else {
+		/* Get the rtc data. */
+		rtc = platform_get_drvdata(pdev);
+
+		/*
+		 * Disable our IRQ.  We're powering down, so we're not
+		 * going to worry about cleaning up.  Most of that should
+		 * have been taken care of by the shutdown scripts and this
+		 * is the final function call.
+		 */
+		if (!rtc->no_irq)
+			disable_irq_nosync(rtc->irq_num);
+
+		/* Oscillator must be on and the countdown chain enabled. */
+		ctrla = rtc->read(rtc, RTC_CTRL_A);
+		ctrla |= RTC_CTRL_A_DV1;
+		ctrla &= ~(RTC_CTRL_A_DV2);
+		rtc->write(rtc, RTC_CTRL_A, ctrla);
+
+		/*
+		 * Read Control 4A and check the status of the auxillary
+		 * battery.  This must be present and working (VRT2 = 1)
+		 * for wakeup and kickstart functionality to be useful.
+		 */
+		ds1685_rtc_switch_to_bank1(rtc);
+		ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
+		if (ctrl4a & RTC_CTRL_4A_VRT2) {
+			/* Clear all of the interrupt flags on Control 4A. */
+			ctrl4a &= ~(RTC_CTRL_4A_RWK_MASK);
+			rtc->write(rtc, RTC_EXT_CTRL_4A, ctrl4a);
+
+			/*
+			 * The auxillary battery is present and working.
+			 * Enable extended functions (ABE=1), enable
+			 * wake-up (WIE=1), and enable kickstart (KSE=1)
+			 * in Control 4B.
+			 */
+			ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
+			ctrl4b |= (RTC_CTRL_4B_ABE | RTC_CTRL_4B_WIE |
+				   RTC_CTRL_4B_KSE);
+			rtc->write(rtc, RTC_EXT_CTRL_4B, ctrl4b);
+		}
+
+		/* Set PAB to 1 in Control 4A to power the system down. */
+		dev_warn(&pdev->dev, "Powerdown.\n");
+		msleep(20);
+		rtc->write(rtc, RTC_EXT_CTRL_4A,
+			   (ctrl4a | RTC_CTRL_4A_PAB));
+
+		/* Spin ... we do not switch back to bank0. */
+		while(1);
+		unreachable();
+	}
+}
+EXPORT_SYMBOL(ds1685_rtc_poweroff);
+/* ----------------------------------------------------------------------- */
+
+
+MODULE_AUTHOR("Joshua Kinard <kumba@gentoo.org>");
+MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd-electronics.com>");
+MODULE_DESCRIPTION("Dallas/Maxim DS1685/DS1687-series RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-ds1685");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1742.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1742.c
new file mode 100644
index 0000000..3abf1cb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds1742.c
@@ -0,0 +1,240 @@
+/*
+ * An rtc driver for the Dallas DS1742
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2006 Torsten Ertbjerg Rasmussen <tr@newtec.dk>
+ *  - nvram size determined from resource
+ *  - this ds1742 driver now supports ds1743.
+ */
+
+#include <linux/bcd.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#define RTC_SIZE		8
+
+#define RTC_CONTROL		0
+#define RTC_CENTURY		0
+#define RTC_SECONDS		1
+#define RTC_MINUTES		2
+#define RTC_HOURS		3
+#define RTC_DAY			4
+#define RTC_DATE		5
+#define RTC_MONTH		6
+#define RTC_YEAR		7
+
+#define RTC_CENTURY_MASK	0x3f
+#define RTC_SECONDS_MASK	0x7f
+#define RTC_DAY_MASK		0x07
+
+/* Bits in the Control/Century register */
+#define RTC_WRITE		0x80
+#define RTC_READ		0x40
+
+/* Bits in the Seconds register */
+#define RTC_STOP		0x80
+
+/* Bits in the Day register */
+#define RTC_BATT_FLAG		0x80
+
+struct rtc_plat_data {
+	void __iomem *ioaddr_nvram;
+	void __iomem *ioaddr_rtc;
+	size_t size_nvram;
+	unsigned long last_jiffies;
+	struct bin_attribute nvram_attr;
+};
+
+static int ds1742_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr_rtc;
+	u8 century;
+
+	century = bin2bcd((tm->tm_year + 1900) / 100);
+
+	writeb(RTC_WRITE, ioaddr + RTC_CONTROL);
+
+	writeb(bin2bcd(tm->tm_year % 100), ioaddr + RTC_YEAR);
+	writeb(bin2bcd(tm->tm_mon + 1), ioaddr + RTC_MONTH);
+	writeb(bin2bcd(tm->tm_wday) & RTC_DAY_MASK, ioaddr + RTC_DAY);
+	writeb(bin2bcd(tm->tm_mday), ioaddr + RTC_DATE);
+	writeb(bin2bcd(tm->tm_hour), ioaddr + RTC_HOURS);
+	writeb(bin2bcd(tm->tm_min), ioaddr + RTC_MINUTES);
+	writeb(bin2bcd(tm->tm_sec) & RTC_SECONDS_MASK, ioaddr + RTC_SECONDS);
+
+	/* RTC_CENTURY and RTC_CONTROL share same register */
+	writeb(RTC_WRITE | (century & RTC_CENTURY_MASK), ioaddr + RTC_CENTURY);
+	writeb(century & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
+	return 0;
+}
+
+static int ds1742_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr_rtc;
+	unsigned int year, month, day, hour, minute, second, week;
+	unsigned int century;
+
+	/* give enough time to update RTC in case of continuous read */
+	if (pdata->last_jiffies == jiffies)
+		msleep(1);
+	pdata->last_jiffies = jiffies;
+	writeb(RTC_READ, ioaddr + RTC_CONTROL);
+	second = readb(ioaddr + RTC_SECONDS) & RTC_SECONDS_MASK;
+	minute = readb(ioaddr + RTC_MINUTES);
+	hour = readb(ioaddr + RTC_HOURS);
+	day = readb(ioaddr + RTC_DATE);
+	week = readb(ioaddr + RTC_DAY) & RTC_DAY_MASK;
+	month = readb(ioaddr + RTC_MONTH);
+	year = readb(ioaddr + RTC_YEAR);
+	century = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
+	writeb(0, ioaddr + RTC_CONTROL);
+	tm->tm_sec = bcd2bin(second);
+	tm->tm_min = bcd2bin(minute);
+	tm->tm_hour = bcd2bin(hour);
+	tm->tm_mday = bcd2bin(day);
+	tm->tm_wday = bcd2bin(week);
+	tm->tm_mon = bcd2bin(month) - 1;
+	/* year is 1900 + tm->tm_year */
+	tm->tm_year = bcd2bin(year) + bcd2bin(century) * 100 - 1900;
+
+	return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops ds1742_rtc_ops = {
+	.read_time	= ds1742_rtc_read_time,
+	.set_time	= ds1742_rtc_set_time,
+};
+
+static ssize_t ds1742_nvram_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr_nvram;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		*buf++ = readb(ioaddr + pos++);
+	return count;
+}
+
+static ssize_t ds1742_nvram_write(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr_nvram;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		writeb(*buf++, ioaddr + pos++);
+	return count;
+}
+
+static int ds1742_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct resource *res;
+	unsigned int cen, sec;
+	struct rtc_plat_data *pdata;
+	void __iomem *ioaddr;
+	int ret = 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ioaddr))
+		return PTR_ERR(ioaddr);
+
+	pdata->ioaddr_nvram = ioaddr;
+	pdata->size_nvram = resource_size(res) - RTC_SIZE;
+	pdata->ioaddr_rtc = ioaddr + pdata->size_nvram;
+
+	sysfs_bin_attr_init(&pdata->nvram_attr);
+	pdata->nvram_attr.attr.name = "nvram";
+	pdata->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
+	pdata->nvram_attr.read = ds1742_nvram_read;
+	pdata->nvram_attr.write = ds1742_nvram_write;
+	pdata->nvram_attr.size = pdata->size_nvram;
+
+	/* turn RTC on if it was not on */
+	ioaddr = pdata->ioaddr_rtc;
+	sec = readb(ioaddr + RTC_SECONDS);
+	if (sec & RTC_STOP) {
+		sec &= RTC_SECONDS_MASK;
+		cen = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
+		writeb(RTC_WRITE, ioaddr + RTC_CONTROL);
+		writeb(sec, ioaddr + RTC_SECONDS);
+		writeb(cen & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
+	}
+	if (!(readb(ioaddr + RTC_DAY) & RTC_BATT_FLAG))
+		dev_warn(&pdev->dev, "voltage-low detected.\n");
+
+	pdata->last_jiffies = jiffies;
+	platform_set_drvdata(pdev, pdata);
+	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				  &ds1742_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &pdata->nvram_attr);
+	if (ret)
+		dev_err(&pdev->dev, "Unable to create sysfs entry: %s\n",
+			pdata->nvram_attr.attr.name);
+
+	return 0;
+}
+
+static int ds1742_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	sysfs_remove_bin_file(&pdev->dev.kobj, &pdata->nvram_attr);
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused ds1742_rtc_of_match[] = {
+	{ .compatible = "maxim,ds1742", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds1742_rtc_of_match);
+
+static struct platform_driver ds1742_rtc_driver = {
+	.probe		= ds1742_rtc_probe,
+	.remove		= ds1742_rtc_remove,
+	.driver		= {
+		.name	= "rtc-ds1742",
+		.of_match_table = of_match_ptr(ds1742_rtc_of_match),
+	},
+};
+
+module_platform_driver(ds1742_rtc_driver);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Dallas DS1742 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-ds1742");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds2404.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds2404.c
new file mode 100644
index 0000000..9a1582e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds2404.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright (C) 2012 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+#include <linux/bcd.h>
+#include <linux/platform_data/rtc-ds2404.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+
+#define DS2404_STATUS_REG 0x200
+#define DS2404_CONTROL_REG 0x201
+#define DS2404_RTC_REG 0x202
+
+#define DS2404_WRITE_SCRATCHPAD_CMD 0x0f
+#define DS2404_READ_SCRATCHPAD_CMD 0xaa
+#define DS2404_COPY_SCRATCHPAD_CMD 0x55
+#define DS2404_READ_MEMORY_CMD 0xf0
+
+struct ds2404;
+
+struct ds2404_chip_ops {
+	int (*map_io)(struct ds2404 *chip, struct platform_device *pdev,
+		      struct ds2404_platform_data *pdata);
+	void (*unmap_io)(struct ds2404 *chip);
+};
+
+#define DS2404_RST	0
+#define DS2404_CLK	1
+#define DS2404_DQ	2
+
+struct ds2404_gpio {
+	const char *name;
+	unsigned int gpio;
+};
+
+struct ds2404 {
+	struct ds2404_gpio *gpio;
+	const struct ds2404_chip_ops *ops;
+	struct rtc_device *rtc;
+};
+
+static struct ds2404_gpio ds2404_gpio[] = {
+	{ "RTC RST", 0 },
+	{ "RTC CLK", 0 },
+	{ "RTC DQ", 0 },
+};
+
+static int ds2404_gpio_map(struct ds2404 *chip, struct platform_device *pdev,
+			  struct ds2404_platform_data *pdata)
+{
+	int i, err;
+
+	ds2404_gpio[DS2404_RST].gpio = pdata->gpio_rst;
+	ds2404_gpio[DS2404_CLK].gpio = pdata->gpio_clk;
+	ds2404_gpio[DS2404_DQ].gpio = pdata->gpio_dq;
+
+	for (i = 0; i < ARRAY_SIZE(ds2404_gpio); i++) {
+		err = gpio_request(ds2404_gpio[i].gpio, ds2404_gpio[i].name);
+		if (err) {
+			dev_err(&pdev->dev, "error mapping gpio %s: %d\n",
+				ds2404_gpio[i].name, err);
+			goto err_request;
+		}
+		if (i != DS2404_DQ)
+			gpio_direction_output(ds2404_gpio[i].gpio, 1);
+	}
+
+	chip->gpio = ds2404_gpio;
+	return 0;
+
+err_request:
+	while (--i >= 0)
+		gpio_free(ds2404_gpio[i].gpio);
+	return err;
+}
+
+static void ds2404_gpio_unmap(struct ds2404 *chip)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ds2404_gpio); i++)
+		gpio_free(ds2404_gpio[i].gpio);
+}
+
+static const struct ds2404_chip_ops ds2404_gpio_ops = {
+	.map_io		= ds2404_gpio_map,
+	.unmap_io	= ds2404_gpio_unmap,
+};
+
+static void ds2404_reset(struct device *dev)
+{
+	gpio_set_value(ds2404_gpio[DS2404_RST].gpio, 0);
+	udelay(1000);
+	gpio_set_value(ds2404_gpio[DS2404_RST].gpio, 1);
+	gpio_set_value(ds2404_gpio[DS2404_CLK].gpio, 0);
+	gpio_direction_output(ds2404_gpio[DS2404_DQ].gpio, 0);
+	udelay(10);
+}
+
+static void ds2404_write_byte(struct device *dev, u8 byte)
+{
+	int i;
+
+	gpio_direction_output(ds2404_gpio[DS2404_DQ].gpio, 1);
+	for (i = 0; i < 8; i++) {
+		gpio_set_value(ds2404_gpio[DS2404_DQ].gpio, byte & (1 << i));
+		udelay(10);
+		gpio_set_value(ds2404_gpio[DS2404_CLK].gpio, 1);
+		udelay(10);
+		gpio_set_value(ds2404_gpio[DS2404_CLK].gpio, 0);
+		udelay(10);
+	}
+}
+
+static u8 ds2404_read_byte(struct device *dev)
+{
+	int i;
+	u8 ret = 0;
+
+	gpio_direction_input(ds2404_gpio[DS2404_DQ].gpio);
+
+	for (i = 0; i < 8; i++) {
+		gpio_set_value(ds2404_gpio[DS2404_CLK].gpio, 0);
+		udelay(10);
+		if (gpio_get_value(ds2404_gpio[DS2404_DQ].gpio))
+			ret |= 1 << i;
+		gpio_set_value(ds2404_gpio[DS2404_CLK].gpio, 1);
+		udelay(10);
+	}
+	return ret;
+}
+
+static void ds2404_read_memory(struct device *dev, u16 offset,
+			       int length, u8 *out)
+{
+	ds2404_reset(dev);
+	ds2404_write_byte(dev, DS2404_READ_MEMORY_CMD);
+	ds2404_write_byte(dev, offset & 0xff);
+	ds2404_write_byte(dev, (offset >> 8) & 0xff);
+	while (length--)
+		*out++ = ds2404_read_byte(dev);
+}
+
+static void ds2404_write_memory(struct device *dev, u16 offset,
+				int length, u8 *out)
+{
+	int i;
+	u8 ta01, ta02, es;
+
+	ds2404_reset(dev);
+	ds2404_write_byte(dev, DS2404_WRITE_SCRATCHPAD_CMD);
+	ds2404_write_byte(dev, offset & 0xff);
+	ds2404_write_byte(dev, (offset >> 8) & 0xff);
+
+	for (i = 0; i < length; i++)
+		ds2404_write_byte(dev, out[i]);
+
+	ds2404_reset(dev);
+	ds2404_write_byte(dev, DS2404_READ_SCRATCHPAD_CMD);
+
+	ta01 = ds2404_read_byte(dev);
+	ta02 = ds2404_read_byte(dev);
+	es = ds2404_read_byte(dev);
+
+	for (i = 0; i < length; i++) {
+		if (out[i] != ds2404_read_byte(dev)) {
+			dev_err(dev, "read invalid data\n");
+			return;
+		}
+	}
+
+	ds2404_reset(dev);
+	ds2404_write_byte(dev, DS2404_COPY_SCRATCHPAD_CMD);
+	ds2404_write_byte(dev, ta01);
+	ds2404_write_byte(dev, ta02);
+	ds2404_write_byte(dev, es);
+
+	gpio_direction_input(ds2404_gpio[DS2404_DQ].gpio);
+	while (gpio_get_value(ds2404_gpio[DS2404_DQ].gpio))
+		;
+}
+
+static void ds2404_enable_osc(struct device *dev)
+{
+	u8 in[1] = { 0x10 }; /* enable oscillator */
+	ds2404_write_memory(dev, 0x201, 1, in);
+}
+
+static int ds2404_read_time(struct device *dev, struct rtc_time *dt)
+{
+	unsigned long time = 0;
+
+	ds2404_read_memory(dev, 0x203, 4, (u8 *)&time);
+	time = le32_to_cpu(time);
+
+	rtc_time_to_tm(time, dt);
+	return rtc_valid_tm(dt);
+}
+
+static int ds2404_set_mmss(struct device *dev, unsigned long secs)
+{
+	u32 time = cpu_to_le32(secs);
+	ds2404_write_memory(dev, 0x203, 4, (u8 *)&time);
+	return 0;
+}
+
+static const struct rtc_class_ops ds2404_rtc_ops = {
+	.read_time	= ds2404_read_time,
+	.set_mmss	= ds2404_set_mmss,
+};
+
+static int rtc_probe(struct platform_device *pdev)
+{
+	struct ds2404_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct ds2404 *chip;
+	int retval = -EBUSY;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(struct ds2404), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->ops = &ds2404_gpio_ops;
+
+	retval = chip->ops->map_io(chip, pdev, pdata);
+	if (retval)
+		goto err_chip;
+
+	dev_info(&pdev->dev, "using GPIOs RST:%d, CLK:%d, DQ:%d\n",
+		 chip->gpio[DS2404_RST].gpio, chip->gpio[DS2404_CLK].gpio,
+		 chip->gpio[DS2404_DQ].gpio);
+
+	platform_set_drvdata(pdev, chip);
+
+	chip->rtc = devm_rtc_device_register(&pdev->dev, "ds2404",
+					&ds2404_rtc_ops, THIS_MODULE);
+	if (IS_ERR(chip->rtc)) {
+		retval = PTR_ERR(chip->rtc);
+		goto err_io;
+	}
+
+	ds2404_enable_osc(&pdev->dev);
+	return 0;
+
+err_io:
+	chip->ops->unmap_io(chip);
+err_chip:
+	return retval;
+}
+
+static int rtc_remove(struct platform_device *dev)
+{
+	struct ds2404 *chip = platform_get_drvdata(dev);
+
+	chip->ops->unmap_io(chip);
+
+	return 0;
+}
+
+static struct platform_driver rtc_device_driver = {
+	.probe	= rtc_probe,
+	.remove = rtc_remove,
+	.driver = {
+		.name	= "ds2404",
+	},
+};
+module_platform_driver(rtc_device_driver);
+
+MODULE_DESCRIPTION("DS2404 RTC");
+MODULE_AUTHOR("Sven Schnelle");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ds2404");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ds3232.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds3232.c
new file mode 100644
index 0000000..0550f7b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ds3232.c
@@ -0,0 +1,735 @@
+/*
+ * RTC client/driver for the Maxim/Dallas DS3232/DS3234 Real-Time Clock
+ *
+ * Copyright (C) 2009-2011 Freescale Semiconductor.
+ * Author: Jack Lan <jack.lan@freescale.com>
+ * Copyright (C) 2008 MIMOMax Wireless Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+
+#define DS3232_REG_SECONDS      0x00
+#define DS3232_REG_MINUTES      0x01
+#define DS3232_REG_HOURS        0x02
+#define DS3232_REG_AMPM         0x02
+#define DS3232_REG_DAY          0x03
+#define DS3232_REG_DATE         0x04
+#define DS3232_REG_MONTH        0x05
+#define DS3232_REG_CENTURY      0x05
+#define DS3232_REG_YEAR         0x06
+#define DS3232_REG_ALARM1       0x07       /* Alarm 1 BASE */
+#define DS3232_REG_ALARM2       0x0B       /* Alarm 2 BASE */
+#define DS3232_REG_CR           0x0E       /* Control register */
+#       define DS3232_REG_CR_nEOSC   0x80
+#       define DS3232_REG_CR_INTCN   0x04
+#       define DS3232_REG_CR_A2IE    0x02
+#       define DS3232_REG_CR_A1IE    0x01
+
+#define DS3232_REG_SR           0x0F       /* control/status register */
+#       define DS3232_REG_SR_OSF     0x80
+#       define DS3232_REG_SR_BSY     0x04
+#       define DS3232_REG_SR_A2F     0x02
+#       define DS3232_REG_SR_A1F     0x01
+
+#define DS3232_REG_TEMPERATURE	0x11
+
+struct ds3232 {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+	struct rtc_device *rtc;
+
+	bool suspended;
+};
+
+static int ds3232_check_rtc_status(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret = 0;
+	int control, stat;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & DS3232_REG_SR_OSF)
+		dev_warn(dev,
+				"oscillator discontinuity flagged, "
+				"time unreliable\n");
+
+	stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		return ret;
+
+	/* If the alarm is pending, clear it before requesting
+	 * the interrupt, so an interrupt event isn't reported
+	 * before everything is initialized.
+	 */
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	control |= DS3232_REG_CR_INTCN;
+
+	return regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+}
+
+static int ds3232_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret;
+	u8 buf[7];
+	unsigned int year, month, day, hour, minute, second;
+	unsigned int week, twelve_hr, am_pm;
+	unsigned int century, add_century = 0;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+	if (ret)
+		return ret;
+
+	second = buf[0];
+	minute = buf[1];
+	hour = buf[2];
+	week = buf[3];
+	day = buf[4];
+	month = buf[5];
+	year = buf[6];
+
+	/* Extract additional information for AM/PM and century */
+
+	twelve_hr = hour & 0x40;
+	am_pm = hour & 0x20;
+	century = month & 0x80;
+
+	/* Write to rtc_time structure */
+
+	time->tm_sec = bcd2bin(second);
+	time->tm_min = bcd2bin(minute);
+	if (twelve_hr) {
+		/* Convert to 24 hr */
+		if (am_pm)
+			time->tm_hour = bcd2bin(hour & 0x1F) + 12;
+		else
+			time->tm_hour = bcd2bin(hour & 0x1F);
+	} else {
+		time->tm_hour = bcd2bin(hour);
+	}
+
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	time->tm_wday = bcd2bin(week) - 1;
+	time->tm_mday = bcd2bin(day);
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	time->tm_mon = bcd2bin(month & 0x7F) - 1;
+	if (century)
+		add_century = 100;
+
+	time->tm_year = bcd2bin(year) + add_century;
+
+	return rtc_valid_tm(time);
+}
+
+static int ds3232_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 buf[7];
+
+	/* Extract time from rtc_time and load into ds3232*/
+
+	buf[0] = bin2bcd(time->tm_sec);
+	buf[1] = bin2bcd(time->tm_min);
+	buf[2] = bin2bcd(time->tm_hour);
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	buf[3] = bin2bcd(time->tm_wday + 1);
+	buf[4] = bin2bcd(time->tm_mday); /* Date */
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	buf[5] = bin2bcd(time->tm_mon + 1);
+	if (time->tm_year >= 100) {
+		buf[5] |= 0x80;
+		buf[6] = bin2bcd(time->tm_year - 100);
+	} else {
+		buf[6] = bin2bcd(time->tm_year);
+	}
+
+	return regmap_bulk_write(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+}
+
+/*
+ * DS3232 has two alarm, we only use alarm1
+ * According to linux specification, only support one-shot alarm
+ * no periodic alarm mode
+ */
+static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
+	alarm->time.tm_min = bcd2bin(buf[1] & 0x7F);
+	alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
+	alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
+
+	alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
+	alarm->pending = !!(stat & DS3232_REG_SR_A1F);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/*
+ * linux rtc-module does not support wday alarm
+ * and only 24h time mode supported indeed
+ */
+static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	buf[0] = bin2bcd(alarm->time.tm_sec);
+	buf[1] = bin2bcd(alarm->time.tm_min);
+	buf[2] = bin2bcd(alarm->time.tm_hour);
+	buf[3] = bin2bcd(alarm->time.tm_mday);
+
+	/* clear alarm interrupt enable bit */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	if (ret)
+		goto out;
+
+	/* clear any pending alarm flag */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		goto out;
+
+	ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	if (alarm->enabled) {
+		control |= DS3232_REG_CR_A1IE;
+		ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	}
+out:
+	return ret;
+}
+
+static int ds3232_update_alarm(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control;
+	int ret;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	if (enabled)
+		/* enable alarm1 interrupt */
+		control |= DS3232_REG_CR_A1IE;
+	else
+		/* disable alarm1 interrupt */
+		control &= ~(DS3232_REG_CR_A1IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+
+	return ret;
+}
+
+/*
+ * Temperature sensor support for ds3232/ds3234 devices.
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3232_hwmon_read_temp(struct device *dev, long int *mC)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 temp_buf[2];
+	s16 temp;
+	int ret;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_TEMPERATURE, temp_buf,
+			       sizeof(temp_buf));
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Temperature is represented as a 10-bit code with a resolution of
+	 * 0.25 degree celsius and encoded in two's complement format.
+	 */
+	temp = (temp_buf[0] << 8) | temp_buf[1];
+	temp >>= 6;
+	*mC = temp * 250;
+
+	return 0;
+}
+
+static umode_t ds3232_hwmon_is_visible(const void *data,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int ds3232_hwmon_read(struct device *dev,
+			     enum hwmon_sensor_types type,
+			     u32 attr, int channel, long *temp)
+{
+	int err;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		err = ds3232_hwmon_read_temp(dev, temp);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	return err;
+}
+
+static u32 ds3232_hwmon_chip_config[] = {
+	HWMON_C_REGISTER_TZ,
+	0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_chip = {
+	.type = hwmon_chip,
+	.config = ds3232_hwmon_chip_config,
+};
+
+static u32 ds3232_hwmon_temp_config[] = {
+	HWMON_T_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_temp = {
+	.type = hwmon_temp,
+	.config = ds3232_hwmon_temp_config,
+};
+
+static const struct hwmon_channel_info *ds3232_hwmon_info[] = {
+	&ds3232_hwmon_chip,
+	&ds3232_hwmon_temp,
+	NULL
+};
+
+static const struct hwmon_ops ds3232_hwmon_hwmon_ops = {
+	.is_visible = ds3232_hwmon_is_visible,
+	.read = ds3232_hwmon_read,
+};
+
+static const struct hwmon_chip_info ds3232_hwmon_chip_info = {
+	.ops = &ds3232_hwmon_hwmon_ops,
+	.info = ds3232_hwmon_info,
+};
+
+static void ds3232_hwmon_register(struct device *dev, const char *name)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	struct device *hwmon_dev;
+
+	if (!IS_ENABLED(CONFIG_RTC_DRV_DS3232_HWMON))
+		return;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, name, ds3232,
+							&ds3232_hwmon_chip_info,
+							NULL);
+	if (IS_ERR(hwmon_dev)) {
+		dev_err(dev, "unable to register hwmon device %ld\n",
+			PTR_ERR(hwmon_dev));
+	}
+}
+
+static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	return ds3232_update_alarm(dev, enabled);
+}
+
+static irqreturn_t ds3232_irq(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	struct mutex *lock = &ds3232->rtc->ops_lock;
+	int ret;
+	int stat, control;
+
+	mutex_lock(lock);
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto unlock;
+
+	if (stat & DS3232_REG_SR_A1F) {
+		ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+		if (ret) {
+			dev_warn(ds3232->dev,
+				 "Read Control Register error %d\n", ret);
+		} else {
+			/* disable alarm1 interrupt */
+			control &= ~(DS3232_REG_CR_A1IE);
+			ret = regmap_write(ds3232->regmap, DS3232_REG_CR,
+					   control);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Control Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			/* clear the alarm pend flag */
+			stat &= ~DS3232_REG_SR_A1F;
+			ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Status Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
+		}
+	}
+
+unlock:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ds3232_rtc_ops = {
+	.read_time = ds3232_read_time,
+	.set_time = ds3232_set_time,
+	.read_alarm = ds3232_read_alarm,
+	.set_alarm = ds3232_set_alarm,
+	.alarm_irq_enable = ds3232_alarm_irq_enable,
+};
+
+static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
+			const char *name)
+{
+	struct ds3232 *ds3232;
+	int ret;
+
+	ds3232 = devm_kzalloc(dev, sizeof(*ds3232), GFP_KERNEL);
+	if (!ds3232)
+		return -ENOMEM;
+
+	ds3232->regmap = regmap;
+	ds3232->irq = irq;
+	ds3232->dev = dev;
+	dev_set_drvdata(dev, ds3232);
+
+	ret = ds3232_check_rtc_status(dev);
+	if (ret)
+		return ret;
+
+	if (ds3232->irq > 0)
+		device_init_wakeup(dev, 1);
+
+	ds3232_hwmon_register(dev, name);
+
+	ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops,
+						THIS_MODULE);
+	if (IS_ERR(ds3232->rtc))
+		return PTR_ERR(ds3232->rtc);
+
+	if (ds3232->irq > 0) {
+		ret = devm_request_threaded_irq(dev, ds3232->irq, NULL,
+						ds3232_irq,
+						IRQF_SHARED | IRQF_ONESHOT,
+						name, dev);
+		if (ret) {
+			device_set_wakeup_capable(dev, 0);
+			ds3232->irq = 0;
+			dev_err(dev, "unable to request IRQ\n");
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ds3232_suspend(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (enable_irq_wake(ds3232->irq))
+			dev_warn_once(dev, "Cannot set wakeup source\n");
+	}
+
+	return 0;
+}
+
+static int ds3232_resume(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ds3232->irq);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops ds3232_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume)
+};
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int ds3232_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = 0x13,
+	};
+
+	regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return ds3232_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static const struct i2c_device_id ds3232_id[] = {
+	{ "ds3232", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds3232_id);
+
+static const struct of_device_id ds3232_of_match[] = {
+	{ .compatible = "dallas,ds3232" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds3232_of_match);
+
+static struct i2c_driver ds3232_driver = {
+	.driver = {
+		.name = "rtc-ds3232",
+		.of_match_table = of_match_ptr(ds3232_of_match),
+		.pm	= &ds3232_pm_ops,
+	},
+	.probe = ds3232_i2c_probe,
+	.id_table = ds3232_id,
+};
+
+static int ds3232_register_driver(void)
+{
+	return i2c_add_driver(&ds3232_driver);
+}
+
+static void ds3232_unregister_driver(void)
+{
+	i2c_del_driver(&ds3232_driver);
+}
+
+#else
+
+static int ds3232_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3232_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ds3234_probe(struct spi_device *spi)
+{
+	int res;
+	unsigned int tmp;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = 0x13,
+		.write_flag_mask = 0x80,
+	};
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = regmap_read(regmap, DS3232_REG_SECONDS, &tmp);
+	if (res)
+		return res;
+
+	/* Control settings
+	 *
+	 * CONTROL_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     EOSC	BBSQW	CONV	RS2	RS1	INTCN	A2IE	A1IE
+	 *
+	 *     0	0	0	1	1	1	0	0
+	 *
+	 * CONTROL_STAT_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     OSF	BB32kHz	CRATE1	CRATE0	EN32kHz	BSY	A2F	A1F
+	 *
+	 *     1	0	0	0	1	0	0	0
+	 */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_CR, tmp & 0x1c);
+	if (res)
+		return res;
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_SR, tmp & 0x88);
+	if (res)
+		return res;
+
+	/* Print our settings */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
+
+	return ds3232_probe(&spi->dev, regmap, spi->irq, "ds3234");
+}
+
+static struct spi_driver ds3234_driver = {
+	.driver = {
+		.name	 = "ds3234",
+	},
+	.probe	 = ds3234_probe,
+};
+
+static int ds3234_register_driver(void)
+{
+	return spi_register_driver(&ds3234_driver);
+}
+
+static void ds3234_unregister_driver(void)
+{
+	spi_unregister_driver(&ds3234_driver);
+}
+
+#else
+
+static int ds3234_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3234_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init ds323x_init(void)
+{
+	int ret;
+
+	ret = ds3232_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3232 driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = ds3234_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3234 driver: %d\n", ret);
+		ds3232_unregister_driver();
+	}
+
+	return ret;
+}
+module_init(ds323x_init)
+
+static void __exit ds323x_exit(void)
+{
+	ds3234_unregister_driver();
+	ds3232_unregister_driver();
+}
+module_exit(ds323x_exit)
+
+MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
+MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS3232/DS3234 RTC Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ds3234");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-efi-platform.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-efi-platform.c
new file mode 100644
index 0000000..6c037dc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-efi-platform.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Moved from arch/ia64/kernel/time.c
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *	David Mosberger <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ * Copyright (C) 1999-2000 VA Linux Systems
+ * Copyright (C) 1999-2000 Walt Drummond <drummond@valinux.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/platform_device.h>
+
+static struct platform_device rtc_efi_dev = {
+	.name = "rtc-efi",
+	.id = -1,
+};
+
+static int __init rtc_init(void)
+{
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		if (platform_device_register(&rtc_efi_dev) < 0)
+			pr_err("unable to register rtc device...\n");
+
+	/* not necessarily an error */
+	return 0;
+}
+module_init(rtc_init);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-efi.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-efi.c
new file mode 100644
index 0000000..0130afd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-efi.c
@@ -0,0 +1,292 @@
+/*
+ * rtc-efi: RTC Class Driver for EFI-based systems
+ *
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ *
+ * Author: dann frazier <dannf@dannf.org>
+ * Based on efirtc.c by Stephane Eranian
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/efi.h>
+
+#define EFI_ISDST (EFI_TIME_ADJUST_DAYLIGHT|EFI_TIME_IN_DAYLIGHT)
+
+/*
+ * returns day of the year [0-365]
+ */
+static inline int
+compute_yday(efi_time_t *eft)
+{
+	/* efi_time_t.month is in the [1-12] so, we need -1 */
+	return rtc_year_days(eft->day, eft->month - 1, eft->year);
+}
+
+/*
+ * returns day of the week [0-6] 0=Sunday
+ */
+static int
+compute_wday(efi_time_t *eft, int yday)
+{
+	int ndays = eft->year * (365 % 7)
+		    + (eft->year - 1) / 4
+		    - (eft->year - 1) / 100
+		    + (eft->year - 1) / 400
+		    + yday;
+
+	/*
+	 * 1/1/0000 may or may not have been a Sunday (if it ever existed at
+	 * all) but assuming it was makes this calculation work correctly.
+	 */
+	return ndays % 7;
+}
+
+static void
+convert_to_efi_time(struct rtc_time *wtime, efi_time_t *eft)
+{
+	eft->year	= wtime->tm_year + 1900;
+	eft->month	= wtime->tm_mon + 1;
+	eft->day	= wtime->tm_mday;
+	eft->hour	= wtime->tm_hour;
+	eft->minute	= wtime->tm_min;
+	eft->second	= wtime->tm_sec;
+	eft->nanosecond = 0;
+	eft->daylight	= wtime->tm_isdst ? EFI_ISDST : 0;
+	eft->timezone	= EFI_UNSPECIFIED_TIMEZONE;
+}
+
+static bool
+convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime)
+{
+	memset(wtime, 0, sizeof(*wtime));
+
+	if (eft->second >= 60)
+		return false;
+	wtime->tm_sec  = eft->second;
+
+	if (eft->minute >= 60)
+		return false;
+	wtime->tm_min  = eft->minute;
+
+	if (eft->hour >= 24)
+		return false;
+	wtime->tm_hour = eft->hour;
+
+	if (!eft->day || eft->day > 31)
+		return false;
+	wtime->tm_mday = eft->day;
+
+	if (!eft->month || eft->month > 12)
+		return false;
+	wtime->tm_mon  = eft->month - 1;
+
+	if (eft->year < 1900 || eft->year > 9999)
+		return false;
+	wtime->tm_year = eft->year - 1900;
+
+	/* day in the year [1-365]*/
+	wtime->tm_yday = compute_yday(eft);
+
+	/* day of the week [0-6], Sunday=0 */
+	wtime->tm_wday = compute_wday(eft, wtime->tm_yday);
+
+	switch (eft->daylight & EFI_ISDST) {
+	case EFI_ISDST:
+		wtime->tm_isdst = 1;
+		break;
+	case EFI_TIME_ADJUST_DAYLIGHT:
+		wtime->tm_isdst = 0;
+		break;
+	default:
+		wtime->tm_isdst = -1;
+	}
+
+	return true;
+}
+
+static int efi_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	efi_time_t eft;
+	efi_status_t status;
+
+	/*
+	 * As of EFI v1.10, this call always returns an unsupported status
+	 */
+	status = efi.get_wakeup_time((efi_bool_t *)&wkalrm->enabled,
+				     (efi_bool_t *)&wkalrm->pending, &eft);
+
+	if (status != EFI_SUCCESS)
+		return -EINVAL;
+
+	if (!convert_from_efi_time(&eft, &wkalrm->time))
+		return -EIO;
+
+	return rtc_valid_tm(&wkalrm->time);
+}
+
+static int efi_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	efi_time_t eft;
+	efi_status_t status;
+
+	convert_to_efi_time(&wkalrm->time, &eft);
+
+	/*
+	 * XXX Fixme:
+	 * As of EFI 0.92 with the firmware I have on my
+	 * machine this call does not seem to work quite
+	 * right
+	 *
+	 * As of v1.10, this call always returns an unsupported status
+	 */
+	status = efi.set_wakeup_time((efi_bool_t)wkalrm->enabled, &eft);
+
+	dev_warn(dev, "write status is %d\n", (int)status);
+
+	return status == EFI_SUCCESS ? 0 : -EINVAL;
+}
+
+static int efi_read_time(struct device *dev, struct rtc_time *tm)
+{
+	efi_status_t status;
+	efi_time_t eft;
+	efi_time_cap_t cap;
+
+	status = efi.get_time(&eft, &cap);
+
+	if (status != EFI_SUCCESS) {
+		/* should never happen */
+		dev_err(dev, "can't read time\n");
+		return -EINVAL;
+	}
+
+	if (!convert_from_efi_time(&eft, tm))
+		return -EIO;
+
+	return rtc_valid_tm(tm);
+}
+
+static int efi_set_time(struct device *dev, struct rtc_time *tm)
+{
+	efi_status_t status;
+	efi_time_t eft;
+
+	convert_to_efi_time(tm, &eft);
+
+	status = efi.set_time(&eft);
+
+	return status == EFI_SUCCESS ? 0 : -EINVAL;
+}
+
+static int efi_procfs(struct device *dev, struct seq_file *seq)
+{
+	efi_time_t      eft, alm;
+	efi_time_cap_t  cap;
+	efi_bool_t      enabled, pending;
+
+	memset(&eft, 0, sizeof(eft));
+	memset(&alm, 0, sizeof(alm));
+	memset(&cap, 0, sizeof(cap));
+
+	efi.get_time(&eft, &cap);
+	efi.get_wakeup_time(&enabled, &pending, &alm);
+
+	seq_printf(seq,
+		   "Time\t\t: %u:%u:%u.%09u\n"
+		   "Date\t\t: %u-%u-%u\n"
+		   "Daylight\t: %u\n",
+		   eft.hour, eft.minute, eft.second, eft.nanosecond,
+		   eft.year, eft.month, eft.day,
+		   eft.daylight);
+
+	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
+		seq_puts(seq, "Timezone\t: unspecified\n");
+	else
+		/* XXX fixme: convert to string? */
+		seq_printf(seq, "Timezone\t: %u\n", eft.timezone);
+
+	seq_printf(seq,
+		   "Alarm Time\t: %u:%u:%u.%09u\n"
+		   "Alarm Date\t: %u-%u-%u\n"
+		   "Alarm Daylight\t: %u\n"
+		   "Enabled\t\t: %s\n"
+		   "Pending\t\t: %s\n",
+		   alm.hour, alm.minute, alm.second, alm.nanosecond,
+		   alm.year, alm.month, alm.day,
+		   alm.daylight,
+		   enabled == 1 ? "yes" : "no",
+		   pending == 1 ? "yes" : "no");
+
+	if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE)
+		seq_puts(seq, "Timezone\t: unspecified\n");
+	else
+		/* XXX fixme: convert to string? */
+		seq_printf(seq, "Timezone\t: %u\n", alm.timezone);
+
+	/*
+	 * now prints the capabilities
+	 */
+	seq_printf(seq,
+		   "Resolution\t: %u\n"
+		   "Accuracy\t: %u\n"
+		   "SetstoZero\t: %u\n",
+		   cap.resolution, cap.accuracy, cap.sets_to_zero);
+
+	return 0;
+}
+
+static const struct rtc_class_ops efi_rtc_ops = {
+	.read_time	= efi_read_time,
+	.set_time	= efi_set_time,
+	.read_alarm	= efi_read_alarm,
+	.set_alarm	= efi_set_alarm,
+	.proc		= efi_procfs,
+};
+
+static int __init efi_rtc_probe(struct platform_device *dev)
+{
+	struct rtc_device *rtc;
+	efi_time_t eft;
+	efi_time_cap_t cap;
+
+	/* First check if the RTC is usable */
+	if (efi.get_time(&eft, &cap) != EFI_SUCCESS)
+		return -ENODEV;
+
+	rtc = devm_rtc_device_register(&dev->dev, "rtc-efi", &efi_rtc_ops,
+					THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	rtc->uie_unsupported = 1;
+	platform_set_drvdata(dev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver efi_rtc_driver = {
+	.driver = {
+		.name = "rtc-efi",
+	},
+};
+
+module_platform_driver_probe(efi_rtc_driver, efi_rtc_probe);
+
+MODULE_ALIAS("platform:rtc-efi");
+MODULE_AUTHOR("dann frazier <dannf@dannf.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EFI RTC driver");
+MODULE_ALIAS("platform:rtc-efi");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-em3027.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-em3027.c
new file mode 100644
index 0000000..b0ef8cf
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-em3027.c
@@ -0,0 +1,162 @@
+/*
+ * An rtc/i2c driver for the EM Microelectronic EM3027
+ * Copyright 2011 CompuLab, Ltd.
+ *
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on rtc-ds1672.c by Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+/* Registers */
+#define EM3027_REG_ON_OFF_CTRL	0x00
+#define EM3027_REG_IRQ_CTRL	0x01
+#define EM3027_REG_IRQ_FLAGS	0x02
+#define EM3027_REG_STATUS	0x03
+#define EM3027_REG_RST_CTRL	0x04
+
+#define EM3027_REG_WATCH_SEC	0x08
+#define EM3027_REG_WATCH_MIN	0x09
+#define EM3027_REG_WATCH_HOUR	0x0a
+#define EM3027_REG_WATCH_DATE	0x0b
+#define EM3027_REG_WATCH_DAY	0x0c
+#define EM3027_REG_WATCH_MON	0x0d
+#define EM3027_REG_WATCH_YEAR	0x0e
+
+#define EM3027_REG_ALARM_SEC	0x10
+#define EM3027_REG_ALARM_MIN	0x11
+#define EM3027_REG_ALARM_HOUR	0x12
+#define EM3027_REG_ALARM_DATE	0x13
+#define EM3027_REG_ALARM_DAY	0x14
+#define EM3027_REG_ALARM_MON	0x15
+#define EM3027_REG_ALARM_YEAR	0x16
+
+static struct i2c_driver em3027_driver;
+
+static int em3027_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	unsigned char addr = EM3027_REG_WATCH_SEC;
+	unsigned char buf[7];
+
+	struct i2c_msg msgs[] = {
+		{/* setup read addr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &addr
+		},
+		{/* read time/date */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 7,
+			.buf = buf
+		},
+	};
+
+	/* read time/date registers */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	tm->tm_sec	= bcd2bin(buf[0]);
+	tm->tm_min	= bcd2bin(buf[1]);
+	tm->tm_hour	= bcd2bin(buf[2]);
+	tm->tm_mday	= bcd2bin(buf[3]);
+	tm->tm_wday	= bcd2bin(buf[4]);
+	tm->tm_mon	= bcd2bin(buf[5]);
+	tm->tm_year	= bcd2bin(buf[6]) + 100;
+
+	return 0;
+}
+
+static int em3027_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[8];
+
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.len = 8,
+		.buf = buf,	/* write time/date */
+	};
+
+	buf[0] = EM3027_REG_WATCH_SEC;
+	buf[1] = bin2bcd(tm->tm_sec);
+	buf[2] = bin2bcd(tm->tm_min);
+	buf[3] = bin2bcd(tm->tm_hour);
+	buf[4] = bin2bcd(tm->tm_mday);
+	buf[5] = bin2bcd(tm->tm_wday);
+	buf[6] = bin2bcd(tm->tm_mon);
+	buf[7] = bin2bcd(tm->tm_year % 100);
+
+	/* write time/date registers */
+	if ((i2c_transfer(client->adapter, &msg, 1)) != 1) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops em3027_rtc_ops = {
+	.read_time = em3027_get_time,
+	.set_time = em3027_set_time,
+};
+
+static int em3027_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct rtc_device *rtc;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	rtc = devm_rtc_device_register(&client->dev, em3027_driver.driver.name,
+				  &em3027_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	return 0;
+}
+
+static const struct i2c_device_id em3027_id[] = {
+	{ "em3027", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, em3027_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id em3027_of_match[] = {
+	{ .compatible = "emmicro,em3027", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, em3027_of_match);
+#endif
+
+static struct i2c_driver em3027_driver = {
+	.driver = {
+		   .name = "rtc-em3027",
+		   .of_match_table = of_match_ptr(em3027_of_match),
+	},
+	.probe = &em3027_probe,
+	.id_table = em3027_id,
+};
+
+module_i2c_driver(em3027_driver);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("EM Microelectronic EM3027 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ep93xx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ep93xx.c
new file mode 100644
index 0000000..6940382
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ep93xx.c
@@ -0,0 +1,185 @@
+/*
+ * A driver for the RTC embedded in the Cirrus Logic EP93XX processors
+ * Copyright (c) 2006 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gfp.h>
+
+#define EP93XX_RTC_DATA			0x000
+#define EP93XX_RTC_MATCH		0x004
+#define EP93XX_RTC_STATUS		0x008
+#define  EP93XX_RTC_STATUS_INTR		 (1<<0)
+#define EP93XX_RTC_LOAD			0x00C
+#define EP93XX_RTC_CONTROL		0x010
+#define  EP93XX_RTC_CONTROL_MIE		 (1<<0)
+#define EP93XX_RTC_SWCOMP		0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK	 0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT	 16
+#define  EP93XX_RTC_SWCOMP_INT_MASK	 0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT	 0
+
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+	void __iomem	*mmio_base;
+	struct rtc_device *rtc;
+};
+
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
+				unsigned short *delete)
+{
+	struct ep93xx_rtc *ep93xx_rtc = dev_get_platdata(dev);
+	unsigned long comp;
+
+	comp = readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
+
+	if (preload)
+		*preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+				>> EP93XX_RTC_SWCOMP_INT_SHIFT;
+
+	if (delete)
+		*delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+				>> EP93XX_RTC_SWCOMP_DEL_SHIFT;
+
+	return 0;
+}
+
+static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ep93xx_rtc *ep93xx_rtc = dev_get_platdata(dev);
+	unsigned long time;
+
+	 time = readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
+
+	rtc_time_to_tm(time, tm);
+	return 0;
+}
+
+static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct ep93xx_rtc *ep93xx_rtc = dev_get_platdata(dev);
+
+	writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
+	return 0;
+}
+
+static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	unsigned short preload, delete;
+
+	ep93xx_rtc_get_swcomp(dev, &preload, &delete);
+
+	seq_printf(seq, "preload\t\t: %d\n", preload);
+	seq_printf(seq, "delete\t\t: %d\n", delete);
+
+	return 0;
+}
+
+static const struct rtc_class_ops ep93xx_rtc_ops = {
+	.read_time	= ep93xx_rtc_read_time,
+	.set_mmss	= ep93xx_rtc_set_mmss,
+	.proc		= ep93xx_rtc_proc,
+};
+
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	unsigned short preload;
+
+	ep93xx_rtc_get_swcomp(dev, &preload, NULL);
+
+	return sprintf(buf, "%d\n", preload);
+}
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
+
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	unsigned short delete;
+
+	ep93xx_rtc_get_swcomp(dev, NULL, &delete);
+
+	return sprintf(buf, "%d\n", delete);
+}
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
+
+static struct attribute *ep93xx_rtc_attrs[] = {
+	&dev_attr_comp_preload.attr,
+	&dev_attr_comp_delete.attr,
+	NULL
+};
+
+static const struct attribute_group ep93xx_rtc_sysfs_files = {
+	.attrs	= ep93xx_rtc_attrs,
+};
+
+static int ep93xx_rtc_probe(struct platform_device *pdev)
+{
+	struct ep93xx_rtc *ep93xx_rtc;
+	struct resource *res;
+	int err;
+
+	ep93xx_rtc = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_rtc), GFP_KERNEL);
+	if (!ep93xx_rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ep93xx_rtc->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ep93xx_rtc->mmio_base))
+		return PTR_ERR(ep93xx_rtc->mmio_base);
+
+	pdev->dev.platform_data = ep93xx_rtc;
+	platform_set_drvdata(pdev, ep93xx_rtc);
+
+	ep93xx_rtc->rtc = devm_rtc_device_register(&pdev->dev,
+				pdev->name, &ep93xx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(ep93xx_rtc->rtc)) {
+		err = PTR_ERR(ep93xx_rtc->rtc);
+		goto exit;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files);
+	if (err)
+		goto exit;
+
+	return 0;
+
+exit:
+	pdev->dev.platform_data = NULL;
+	return err;
+}
+
+static int ep93xx_rtc_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files);
+	pdev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_rtc_driver = {
+	.driver		= {
+		.name	= "ep93xx-rtc",
+	},
+	.probe		= ep93xx_rtc_probe,
+	.remove		= ep93xx_rtc_remove,
+};
+
+module_platform_driver(ep93xx_rtc_driver);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("EP93XX RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-fm3130.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-fm3130.c
new file mode 100644
index 0000000..576eadb
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-fm3130.c
@@ -0,0 +1,536 @@
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ *  Copyright (C) 2008 Sergey Lapin
+ *  Based on ds1307 driver by James Chapman and David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+#define FM3130_RTC_CONTROL	(0x0)
+#define FM3130_CAL_CONTROL	(0x1)
+#define FM3130_RTC_SECONDS	(0x2)
+#define FM3130_RTC_MINUTES	(0x3)
+#define FM3130_RTC_HOURS	(0x4)
+#define FM3130_RTC_DAY		(0x5)
+#define FM3130_RTC_DATE		(0x6)
+#define FM3130_RTC_MONTHS	(0x7)
+#define FM3130_RTC_YEARS	(0x8)
+
+#define FM3130_ALARM_SECONDS	(0x9)
+#define FM3130_ALARM_MINUTES	(0xa)
+#define FM3130_ALARM_HOURS	(0xb)
+#define FM3130_ALARM_DATE	(0xc)
+#define FM3130_ALARM_MONTHS	(0xd)
+#define FM3130_ALARM_WP_CONTROL	(0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+	u8			reg_addr_time;
+	u8			reg_addr_alarm;
+	u8			regs[15];
+	struct i2c_msg		msg[4];
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+	int			alarm_valid;
+	int			data_valid;
+};
+static const struct i2c_device_id fm3130_id[] = {
+	{ "fm3130", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL		0
+#define FM3130_MODE_WRITE		1
+#define FM3130_MODE_READ		2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+	switch (mode) {
+	case FM3130_MODE_NORMAL:
+		fm3130->regs[FM3130_RTC_CONTROL] &=
+			~(FM3130_RTC_CONTROL_BIT_WRITE |
+			FM3130_RTC_CONTROL_BIT_READ);
+		break;
+	case FM3130_MODE_WRITE:
+		fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+		break;
+	case FM3130_MODE_READ:
+		fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+		break;
+	default:
+		dev_dbg(dev, "invalid mode %d\n", mode);
+		break;
+	}
+
+	i2c_smbus_write_byte_data(fm3130->client,
+		 FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int		tmp;
+
+	if (!fm3130->data_valid) {
+		/* We have invalid data in RTC, probably due
+		to battery faults or other problems. Return EIO
+		for now, it will allow us to set data later instead
+		of error during probing which disables device */
+		return -EIO;
+	}
+	fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+	/* read the RTC date and time registers all at once */
+	tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+			fm3130->msg, 2);
+	if (tmp != 2) {
+		dev_err(dev, "%s error %d\n", "read", tmp);
+		return -EIO;
+	}
+
+	fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+	dev_dbg(dev, "%s: %15ph\n", "read", fm3130->regs);
+
+	t->tm_sec = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	t->tm_min = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+	t->tm_hour = bcd2bin(tmp);
+	t->tm_wday = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+	t->tm_mday = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+	t->tm_mon = bcd2bin(tmp) - 1;
+
+	/* assume 20YY not 19YY, and ignore CF bit */
+	t->tm_year = bcd2bin(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	/* initial clock setting can be undefined */
+	return rtc_valid_tm(t);
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int		tmp, i;
+	u8		*buf = fm3130->regs;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", t->tm_sec, t->tm_min,
+		t->tm_hour, t->tm_mday,
+		t->tm_mon, t->tm_year, t->tm_wday);
+
+	/* first register addr */
+	buf[FM3130_RTC_SECONDS] = bin2bcd(t->tm_sec);
+	buf[FM3130_RTC_MINUTES] = bin2bcd(t->tm_min);
+	buf[FM3130_RTC_HOURS] = bin2bcd(t->tm_hour);
+	buf[FM3130_RTC_DAY] = bin2bcd(t->tm_wday + 1);
+	buf[FM3130_RTC_DATE] = bin2bcd(t->tm_mday);
+	buf[FM3130_RTC_MONTHS] = bin2bcd(t->tm_mon + 1);
+
+	/* assume 20YY not 19YY */
+	tmp = t->tm_year - 100;
+	buf[FM3130_RTC_YEARS] = bin2bcd(tmp);
+
+	dev_dbg(dev, "%s: %15ph\n", "write", buf);
+
+	fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+	/* Writing time registers, we don't support multibyte transfers */
+	for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+		i2c_smbus_write_byte_data(fm3130->client,
+					FM3130_RTC_SECONDS + i,
+					fm3130->regs[FM3130_RTC_SECONDS + i]);
+	}
+
+	fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+	/* We assume here that data are valid once written */
+	if (!fm3130->data_valid)
+		fm3130->data_valid = 1;
+	return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int tmp;
+	struct rtc_time *tm = &alrm->time;
+
+	if (!fm3130->alarm_valid) {
+		/*
+		 * We have invalid alarm in RTC, probably due to battery faults
+		 * or other problems. Return EIO for now, it will allow us to
+		 * set alarm value later instead of error during probing which
+		 * disables device
+		 */
+		return -EIO;
+	}
+
+	/* read the RTC alarm registers all at once */
+	tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+			&fm3130->msg[2], 2);
+	if (tmp != 2) {
+		dev_err(dev, "%s error %d\n", "read", tmp);
+		return -EIO;
+	}
+	dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+			fm3130->regs[FM3130_ALARM_SECONDS],
+			fm3130->regs[FM3130_ALARM_MINUTES],
+			fm3130->regs[FM3130_ALARM_HOURS],
+			fm3130->regs[FM3130_ALARM_DATE],
+			fm3130->regs[FM3130_ALARM_MONTHS]);
+
+	tm->tm_sec	= bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+	tm->tm_min	= bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+	tm->tm_hour	= bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+	tm->tm_mday	= bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+	tm->tm_mon	= bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+
+	if (tm->tm_mon > 0)
+		tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read alarm", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* check if alarm enabled */
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
+		(~fm3130->regs[FM3130_RTC_CONTROL] &
+			FM3130_RTC_CONTROL_BIT_CAL)) {
+		alrm->enabled = 1;
+	}
+
+	return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	int i;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write alarm", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	fm3130->regs[FM3130_ALARM_SECONDS] =
+		(tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_MINUTES] =
+		(tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_HOURS] =
+		(tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_DATE] =
+		(tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
+
+	fm3130->regs[FM3130_ALARM_MONTHS] =
+		(tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
+
+	dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+			fm3130->regs[FM3130_ALARM_SECONDS],
+			fm3130->regs[FM3130_ALARM_MINUTES],
+			fm3130->regs[FM3130_ALARM_HOURS],
+			fm3130->regs[FM3130_ALARM_DATE],
+			fm3130->regs[FM3130_ALARM_MONTHS]);
+	/* Writing time registers, we don't support multibyte transfers */
+	for (i = 0; i < FM3130_ALARM_REGS; i++) {
+		i2c_smbus_write_byte_data(fm3130->client,
+					FM3130_ALARM_SECONDS + i,
+					fm3130->regs[FM3130_ALARM_SECONDS + i]);
+	}
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	/* enable or disable alarm */
+	if (alrm->enabled) {
+		i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+			(fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL)) |
+					FM3130_RTC_CONTROL_BIT_AEN);
+	} else {
+		i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL) &
+					~(FM3130_RTC_CONTROL_BIT_AEN));
+	}
+
+	/* We assume here that data is valid once written */
+	if (!fm3130->alarm_valid)
+		fm3130->alarm_valid = 1;
+
+	return 0;
+}
+
+static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct fm3130 *fm3130 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+	dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
+		enabled, fm3130->regs[FM3130_RTC_CONTROL]);
+
+	switch (enabled) {
+	case 0:		/* alarm off */
+		ret = i2c_smbus_write_byte_data(fm3130->client,
+			FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL) &
+					~(FM3130_RTC_CONTROL_BIT_AEN));
+		break;
+	case 1:		/* alarm on */
+		ret = i2c_smbus_write_byte_data(fm3130->client,
+			FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL)) |
+					FM3130_RTC_CONTROL_BIT_AEN);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+	.read_time	= fm3130_get_time,
+	.set_time	= fm3130_set_time,
+	.read_alarm	= fm3130_read_alarm,
+	.set_alarm	= fm3130_set_alarm,
+	.alarm_irq_enable = fm3130_alarm_irq_enable,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int fm3130_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct fm3130		*fm3130;
+	int			err = -ENODEV;
+	int			tmp;
+	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+
+	if (!i2c_check_functionality(adapter,
+			I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EIO;
+
+	fm3130 = devm_kzalloc(&client->dev, sizeof(struct fm3130), GFP_KERNEL);
+
+	if (!fm3130)
+		return -ENOMEM;
+
+	fm3130->client = client;
+	i2c_set_clientdata(client, fm3130);
+	fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+	fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+	/* Messages to read time */
+	fm3130->msg[0].addr = client->addr;
+	fm3130->msg[0].flags = 0;
+	fm3130->msg[0].len = 1;
+	fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+	fm3130->msg[1].addr = client->addr;
+	fm3130->msg[1].flags = I2C_M_RD;
+	fm3130->msg[1].len = FM3130_CLOCK_REGS;
+	fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+	/* Messages to read alarm */
+	fm3130->msg[2].addr = client->addr;
+	fm3130->msg[2].flags = 0;
+	fm3130->msg[2].len = 1;
+	fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+	fm3130->msg[3].addr = client->addr;
+	fm3130->msg[3].flags = I2C_M_RD;
+	fm3130->msg[3].len = FM3130_ALARM_REGS;
+	fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+	fm3130->alarm_valid = 0;
+	fm3130->data_valid = 0;
+
+	tmp = i2c_transfer(adapter, fm3130->msg, 4);
+	if (tmp != 4) {
+		dev_dbg(&client->dev, "read error %d\n", tmp);
+		err = -EIO;
+		goto exit_free;
+	}
+
+	fm3130->regs[FM3130_RTC_CONTROL] =
+		i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+	fm3130->regs[FM3130_CAL_CONTROL] =
+		i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+	/* Disabling calibration mode */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_CAL));
+		dev_warn(&client->dev, "Disabling calibration mode!\n");
+	}
+
+	/* Disabling read and write modes */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_READ |
+					FM3130_RTC_CONTROL_BIT_WRITE));
+		dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+	}
+
+	/* oscillator off?  turn it on, so clock can tick. */
+	if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+		i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+			fm3130->regs[FM3130_CAL_CONTROL] &
+				~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+	/* low battery?  clear flag, and warn */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~(FM3130_RTC_CONTROL_BIT_LB));
+		dev_warn(&client->dev, "Low battery!\n");
+	}
+
+	/* check if Power On Reset bit is set */
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+			fm3130->regs[FM3130_RTC_CONTROL] &
+				~FM3130_RTC_CONTROL_BIT_POR);
+		dev_dbg(&client->dev, "POR bit is set\n");
+	}
+	/* ACS is controlled by alarm */
+	i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+	/* alarm registers sanity check */
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	if (tmp > 59)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	if (tmp > 59)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+	if (tmp > 23)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	if (tmp == 0 || tmp > 31)
+		goto bad_alarm;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+	if (tmp == 0 || tmp > 12)
+		goto bad_alarm;
+
+	fm3130->alarm_valid = 1;
+
+bad_alarm:
+
+	/* clock registers sanity chek */
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+	if (tmp > 59)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+	if (tmp > 59)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+	if (tmp > 23)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
+	if (tmp == 0 || tmp > 7)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+	if (tmp == 0 || tmp > 31)
+		goto bad_clock;
+
+	tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+	if (tmp == 0 || tmp > 12)
+		goto bad_clock;
+
+	fm3130->data_valid = 1;
+
+bad_clock:
+
+	if (!fm3130->data_valid || !fm3130->alarm_valid)
+		dev_dbg(&client->dev, "%s: %15ph\n", "bogus registers",
+			fm3130->regs);
+
+	/* We won't bail out here because we just got invalid data.
+	   Time setting from u-boot doesn't work anyway */
+	fm3130->rtc = devm_rtc_device_register(&client->dev, client->name,
+				&fm3130_rtc_ops, THIS_MODULE);
+	if (IS_ERR(fm3130->rtc)) {
+		err = PTR_ERR(fm3130->rtc);
+		dev_err(&client->dev,
+			"unable to register the class device\n");
+		goto exit_free;
+	}
+	return 0;
+exit_free:
+	return err;
+}
+
+static struct i2c_driver fm3130_driver = {
+	.driver = {
+		.name	= "rtc-fm3130",
+	},
+	.probe		= fm3130_probe,
+	.id_table	= fm3130_id,
+};
+
+module_i2c_driver(fm3130_driver);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ftrtc010.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ftrtc010.c
new file mode 100644
index 0000000..af8d6be
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ftrtc010.c
@@ -0,0 +1,208 @@
+/*
+ *  Faraday Technology FTRTC010 driver
+ *
+ *  Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Original code for older kernel 2.6.15 are from Stormlinksemi
+ * first update from Janos Laube for > 2.6.29 kernels
+ *
+ * checkpatch fixes and usage of rtc-lib code
+ * Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ */
+
+#include <linux/rtc.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#define DRV_NAME        "rtc-ftrtc010"
+
+MODULE_AUTHOR("Hans Ulli Kroll <ulli.kroll@googlemail.com>");
+MODULE_DESCRIPTION("RTC driver for Gemini SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+struct ftrtc010_rtc {
+	struct rtc_device	*rtc_dev;
+	void __iomem		*rtc_base;
+	int			rtc_irq;
+	struct clk		*pclk;
+	struct clk		*extclk;
+};
+
+enum ftrtc010_rtc_offsets {
+	FTRTC010_RTC_SECOND		= 0x00,
+	FTRTC010_RTC_MINUTE		= 0x04,
+	FTRTC010_RTC_HOUR		= 0x08,
+	FTRTC010_RTC_DAYS		= 0x0C,
+	FTRTC010_RTC_ALARM_SECOND	= 0x10,
+	FTRTC010_RTC_ALARM_MINUTE	= 0x14,
+	FTRTC010_RTC_ALARM_HOUR		= 0x18,
+	FTRTC010_RTC_RECORD		= 0x1C,
+	FTRTC010_RTC_CR			= 0x20,
+};
+
+static irqreturn_t ftrtc010_rtc_interrupt(int irq, void *dev)
+{
+	return IRQ_HANDLED;
+}
+
+/*
+ * Looks like the RTC in the Gemini SoC is (totaly) broken
+ * We can't read/write directly the time from RTC registers.
+ * We must do some "offset" calculation to get the real time
+ *
+ * This FIX works pretty fine and Stormlinksemi aka Cortina-Networks does
+ * the same thing, without the rtc-lib.c calls.
+ */
+
+static int ftrtc010_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ftrtc010_rtc *rtc = dev_get_drvdata(dev);
+
+	unsigned int  days, hour, min, sec;
+	unsigned long offset, time;
+
+	sec  = readl(rtc->rtc_base + FTRTC010_RTC_SECOND);
+	min  = readl(rtc->rtc_base + FTRTC010_RTC_MINUTE);
+	hour = readl(rtc->rtc_base + FTRTC010_RTC_HOUR);
+	days = readl(rtc->rtc_base + FTRTC010_RTC_DAYS);
+	offset = readl(rtc->rtc_base + FTRTC010_RTC_RECORD);
+
+	time = offset + days * 86400 + hour * 3600 + min * 60 + sec;
+
+	rtc_time_to_tm(time, tm);
+
+	return 0;
+}
+
+static int ftrtc010_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ftrtc010_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int sec, min, hour, day;
+	unsigned long offset, time;
+
+	if (tm->tm_year >= 2148)	/* EPOCH Year + 179 */
+		return -EINVAL;
+
+	rtc_tm_to_time(tm, &time);
+
+	sec = readl(rtc->rtc_base + FTRTC010_RTC_SECOND);
+	min = readl(rtc->rtc_base + FTRTC010_RTC_MINUTE);
+	hour = readl(rtc->rtc_base + FTRTC010_RTC_HOUR);
+	day = readl(rtc->rtc_base + FTRTC010_RTC_DAYS);
+
+	offset = time - (day * 86400 + hour * 3600 + min * 60 + sec);
+
+	writel(offset, rtc->rtc_base + FTRTC010_RTC_RECORD);
+	writel(0x01, rtc->rtc_base + FTRTC010_RTC_CR);
+
+	return 0;
+}
+
+static const struct rtc_class_ops ftrtc010_rtc_ops = {
+	.read_time     = ftrtc010_rtc_read_time,
+	.set_time      = ftrtc010_rtc_set_time,
+};
+
+static int ftrtc010_rtc_probe(struct platform_device *pdev)
+{
+	struct ftrtc010_rtc *rtc;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (unlikely(!rtc))
+		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->pclk = devm_clk_get(dev, "PCLK");
+	if (IS_ERR(rtc->pclk)) {
+		dev_err(dev, "could not get PCLK\n");
+	} else {
+		ret = clk_prepare_enable(rtc->pclk);
+		if (ret) {
+			dev_err(dev, "failed to enable PCLK\n");
+			return ret;
+		}
+	}
+	rtc->extclk = devm_clk_get(dev, "EXTCLK");
+	if (IS_ERR(rtc->extclk)) {
+		dev_err(dev, "could not get EXTCLK\n");
+	} else {
+		ret = clk_prepare_enable(rtc->extclk);
+		if (ret) {
+			dev_err(dev, "failed to enable EXTCLK\n");
+			return ret;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res)
+		return -ENODEV;
+
+	rtc->rtc_irq = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	rtc->rtc_base = devm_ioremap(dev, res->start,
+				     resource_size(res));
+	if (!rtc->rtc_base)
+		return -ENOMEM;
+
+	ret = devm_request_irq(dev, rtc->rtc_irq, ftrtc010_rtc_interrupt,
+			       IRQF_SHARED, pdev->name, dev);
+	if (unlikely(ret))
+		return ret;
+
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev,
+					   &ftrtc010_rtc_ops, THIS_MODULE);
+	return PTR_ERR_OR_ZERO(rtc->rtc_dev);
+}
+
+static int ftrtc010_rtc_remove(struct platform_device *pdev)
+{
+	struct ftrtc010_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (!IS_ERR(rtc->extclk))
+		clk_disable_unprepare(rtc->extclk);
+	if (!IS_ERR(rtc->pclk))
+		clk_disable_unprepare(rtc->pclk);
+	rtc_device_unregister(rtc->rtc_dev);
+
+	return 0;
+}
+
+static const struct of_device_id ftrtc010_rtc_dt_match[] = {
+	{ .compatible = "cortina,gemini-rtc" },
+	{ .compatible = "faraday,ftrtc010" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ftrtc010_rtc_dt_match);
+
+static struct platform_driver ftrtc010_rtc_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = ftrtc010_rtc_dt_match,
+	},
+	.probe		= ftrtc010_rtc_probe,
+	.remove		= ftrtc010_rtc_remove,
+};
+
+module_platform_driver_probe(ftrtc010_rtc_driver, ftrtc010_rtc_probe);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-generic.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-generic.c
new file mode 100644
index 0000000..1bf5d23
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-generic.c
@@ -0,0 +1,38 @@
+/* rtc-generic: RTC driver using the generic RTC abstraction
+ *
+ * Copyright (C) 2008 Kyle McMartin <kyle@mcmartin.ca>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+static int __init generic_rtc_probe(struct platform_device *dev)
+{
+	struct rtc_device *rtc;
+	const struct rtc_class_ops *ops = dev_get_platdata(&dev->dev);
+
+	rtc = devm_rtc_device_register(&dev->dev, "rtc-generic",
+					ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(dev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver generic_rtc_driver = {
+	.driver = {
+		.name = "rtc-generic",
+	},
+};
+
+module_platform_driver_probe(generic_rtc_driver, generic_rtc_probe);
+
+MODULE_AUTHOR("Kyle McMartin <kyle@mcmartin.ca>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic RTC driver");
+MODULE_ALIAS("platform:rtc-generic");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-goldfish.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-goldfish.c
new file mode 100644
index 0000000..30cbe22
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-goldfish.c
@@ -0,0 +1,240 @@
+/* drivers/rtc/rtc-goldfish.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2017 Imagination Technologies Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/io.h>
+
+#define TIMER_TIME_LOW		0x00	/* get low bits of current time  */
+					/*   and update TIMER_TIME_HIGH  */
+#define TIMER_TIME_HIGH	0x04	/* get high bits of time at last */
+					/*   TIMER_TIME_LOW read         */
+#define TIMER_ALARM_LOW	0x08	/* set low bits of alarm and     */
+					/*   activate it                 */
+#define TIMER_ALARM_HIGH	0x0c	/* set high bits of next alarm   */
+#define TIMER_IRQ_ENABLED	0x10
+#define TIMER_CLEAR_ALARM	0x14
+#define TIMER_ALARM_STATUS	0x18
+#define TIMER_CLEAR_INTERRUPT	0x1c
+
+struct goldfish_rtc {
+	void __iomem *base;
+	int irq;
+	struct rtc_device *rtc;
+};
+
+static int goldfish_rtc_read_alarm(struct device *dev,
+				   struct rtc_wkalrm *alrm)
+{
+	u64 rtc_alarm;
+	u64 rtc_alarm_low;
+	u64 rtc_alarm_high;
+	void __iomem *base;
+	struct goldfish_rtc *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	rtc_alarm_low = readl(base + TIMER_ALARM_LOW);
+	rtc_alarm_high = readl(base + TIMER_ALARM_HIGH);
+	rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
+
+	do_div(rtc_alarm, NSEC_PER_SEC);
+	memset(alrm, 0, sizeof(struct rtc_wkalrm));
+
+	rtc_time_to_tm(rtc_alarm, &alrm->time);
+
+	if (readl(base + TIMER_ALARM_STATUS))
+		alrm->enabled = 1;
+	else
+		alrm->enabled = 0;
+
+	return 0;
+}
+
+static int goldfish_rtc_set_alarm(struct device *dev,
+				  struct rtc_wkalrm *alrm)
+{
+	struct goldfish_rtc *rtcdrv;
+	unsigned long rtc_alarm;
+	u64 rtc_alarm64;
+	u64 rtc_status_reg;
+	void __iomem *base;
+	int ret = 0;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	if (alrm->enabled) {
+		ret = rtc_tm_to_time(&alrm->time, &rtc_alarm);
+		if (ret != 0)
+			return ret;
+
+		rtc_alarm64 = rtc_alarm * NSEC_PER_SEC;
+		writel((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
+		writel(rtc_alarm64, base + TIMER_ALARM_LOW);
+		writel(1, base + TIMER_IRQ_ENABLED);
+	} else {
+		/*
+		 * if this function was called with enabled=0
+		 * then it could mean that the application is
+		 * trying to cancel an ongoing alarm
+		 */
+		rtc_status_reg = readl(base + TIMER_ALARM_STATUS);
+		if (rtc_status_reg)
+			writel(1, base + TIMER_CLEAR_ALARM);
+	}
+
+	return ret;
+}
+
+static int goldfish_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	void __iomem *base;
+	struct goldfish_rtc *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	if (enabled)
+		writel(1, base + TIMER_IRQ_ENABLED);
+	else
+		writel(0, base + TIMER_IRQ_ENABLED);
+
+	return 0;
+}
+
+static irqreturn_t goldfish_rtc_interrupt(int irq, void *dev_id)
+{
+	struct goldfish_rtc *rtcdrv = dev_id;
+	void __iomem *base = rtcdrv->base;
+
+	writel(1, base + TIMER_CLEAR_INTERRUPT);
+
+	rtc_update_irq(rtcdrv->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int goldfish_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct goldfish_rtc *rtcdrv;
+	void __iomem *base;
+	u64 time_high;
+	u64 time_low;
+	u64 time;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	time_low = readl(base + TIMER_TIME_LOW);
+	time_high = readl(base + TIMER_TIME_HIGH);
+	time = (time_high << 32) | time_low;
+
+	do_div(time, NSEC_PER_SEC);
+
+	rtc_time_to_tm(time, tm);
+
+	return 0;
+}
+
+static int goldfish_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct goldfish_rtc *rtcdrv;
+	void __iomem *base;
+	unsigned long now;
+	u64 now64;
+	int ret;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0) {
+		now64 = now * NSEC_PER_SEC;
+		writel((now64 >> 32), base + TIMER_TIME_HIGH);
+		writel(now64, base + TIMER_TIME_LOW);
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops goldfish_rtc_ops = {
+	.read_time	= goldfish_rtc_read_time,
+	.set_time	= goldfish_rtc_set_time,
+	.read_alarm	= goldfish_rtc_read_alarm,
+	.set_alarm	= goldfish_rtc_set_alarm,
+	.alarm_irq_enable = goldfish_rtc_alarm_irq_enable
+};
+
+static int goldfish_rtc_probe(struct platform_device *pdev)
+{
+	struct goldfish_rtc *rtcdrv;
+	struct resource *r;
+	int err;
+
+	rtcdrv = devm_kzalloc(&pdev->dev, sizeof(*rtcdrv), GFP_KERNEL);
+	if (!rtcdrv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rtcdrv);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	rtcdrv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(rtcdrv->base))
+		return -ENODEV;
+
+	rtcdrv->irq = platform_get_irq(pdev, 0);
+	if (rtcdrv->irq < 0)
+		return -ENODEV;
+
+	rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					       &goldfish_rtc_ops,
+					       THIS_MODULE);
+	if (IS_ERR(rtcdrv->rtc))
+		return PTR_ERR(rtcdrv->rtc);
+
+	err = devm_request_irq(&pdev->dev, rtcdrv->irq,
+			       goldfish_rtc_interrupt,
+			       0, pdev->name, rtcdrv);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct of_device_id goldfish_rtc_of_match[] = {
+	{ .compatible = "google,goldfish-rtc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_rtc_of_match);
+
+static struct platform_driver goldfish_rtc = {
+	.probe = goldfish_rtc_probe,
+	.driver = {
+		.name = "goldfish_rtc",
+		.of_match_table = goldfish_rtc_of_match,
+	}
+};
+
+module_platform_driver(goldfish_rtc);
+
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-hid-sensor-time.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-hid-sensor-time.c
new file mode 100644
index 0000000..3e1abb4
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-hid-sensor-time.c
@@ -0,0 +1,342 @@
+/*
+ * HID Sensor Time Driver
+ * Copyright (c) 2012, Alexander Holler.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/rtc.h>
+
+enum hid_time_channel {
+	CHANNEL_SCAN_INDEX_YEAR,
+	CHANNEL_SCAN_INDEX_MONTH,
+	CHANNEL_SCAN_INDEX_DAY,
+	CHANNEL_SCAN_INDEX_HOUR,
+	CHANNEL_SCAN_INDEX_MINUTE,
+	CHANNEL_SCAN_INDEX_SECOND,
+	TIME_RTC_CHANNEL_MAX,
+};
+
+struct hid_time_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_common common_attributes;
+	struct hid_sensor_hub_attribute_info info[TIME_RTC_CHANNEL_MAX];
+	struct rtc_time last_time;
+	spinlock_t lock_last_time;
+	struct completion comp_last_time;
+	struct rtc_time time_buf;
+	struct rtc_device *rtc;
+};
+
+static const u32 hid_time_addresses[TIME_RTC_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_TIME_YEAR,
+	HID_USAGE_SENSOR_TIME_MONTH,
+	HID_USAGE_SENSOR_TIME_DAY,
+	HID_USAGE_SENSOR_TIME_HOUR,
+	HID_USAGE_SENSOR_TIME_MINUTE,
+	HID_USAGE_SENSOR_TIME_SECOND,
+};
+
+/* Channel names for verbose error messages */
+static const char * const hid_time_channel_names[TIME_RTC_CHANNEL_MAX] = {
+	"year", "month", "day", "hour", "minute", "second",
+};
+
+/* Callback handler to send event after all samples are received and captured */
+static int hid_time_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id, void *priv)
+{
+	unsigned long flags;
+	struct hid_time_state *time_state = platform_get_drvdata(priv);
+
+	spin_lock_irqsave(&time_state->lock_last_time, flags);
+	time_state->last_time = time_state->time_buf;
+	spin_unlock_irqrestore(&time_state->lock_last_time, flags);
+	complete(&time_state->comp_last_time);
+	return 0;
+}
+
+static u32 hid_time_value(size_t raw_len, char *raw_data)
+{
+	switch (raw_len) {
+	case 1:
+		return *(u8 *)raw_data;
+	case 2:
+		return *(u16 *)raw_data;
+	case 4:
+		return *(u32 *)raw_data;
+	default:
+		return (u32)(~0U); /* 0xff... or -1 to denote an error */
+	}
+}
+
+static int hid_time_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id, size_t raw_len,
+				char *raw_data, void *priv)
+{
+	struct hid_time_state *time_state = platform_get_drvdata(priv);
+	struct rtc_time *time_buf = &time_state->time_buf;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_TIME_YEAR:
+		/*
+		 * The draft for HID-sensors (HUTRR39) currently doesn't define
+		 * the range for the year attribute. Therefor we support
+		 * 8 bit (0-99) and 16 or 32 bits (full) as size for the year.
+		 */
+		if (raw_len == 1) {
+			time_buf->tm_year = *(u8 *)raw_data;
+			if (time_buf->tm_year < 70)
+				/* assume we are in 1970...2069 */
+				time_buf->tm_year += 100;
+		} else
+			time_buf->tm_year =
+				(int)hid_time_value(raw_len, raw_data)-1900;
+		break;
+	case HID_USAGE_SENSOR_TIME_MONTH:
+		/* sensors are sending the month as 1-12, we need 0-11 */
+		time_buf->tm_mon = (int)hid_time_value(raw_len, raw_data)-1;
+		break;
+	case HID_USAGE_SENSOR_TIME_DAY:
+		time_buf->tm_mday = (int)hid_time_value(raw_len, raw_data);
+		break;
+	case HID_USAGE_SENSOR_TIME_HOUR:
+		time_buf->tm_hour = (int)hid_time_value(raw_len, raw_data);
+		break;
+	case HID_USAGE_SENSOR_TIME_MINUTE:
+		time_buf->tm_min = (int)hid_time_value(raw_len, raw_data);
+		break;
+	case HID_USAGE_SENSOR_TIME_SECOND:
+		time_buf->tm_sec = (int)hid_time_value(raw_len, raw_data);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* small helper, haven't found any other way */
+static const char *hid_time_attrib_name(u32 attrib_id)
+{
+	static const char unknown[] = "unknown";
+	unsigned i;
+
+	for (i = 0; i < TIME_RTC_CHANNEL_MAX; ++i) {
+		if (hid_time_addresses[i] == attrib_id)
+			return hid_time_channel_names[i];
+	}
+	return unknown; /* should never happen */
+}
+
+static int hid_time_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				struct hid_time_state *time_state)
+{
+	int report_id, i;
+
+	for (i = 0; i < TIME_RTC_CHANNEL_MAX; ++i)
+		if (sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT, usage_id,
+				hid_time_addresses[i],
+				&time_state->info[i]) < 0)
+			return -EINVAL;
+	/* Check the (needed) attributes for sanity */
+	report_id = time_state->info[0].report_id;
+	if (report_id < 0) {
+		dev_err(&pdev->dev, "bad report ID!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < TIME_RTC_CHANNEL_MAX; ++i) {
+		if (time_state->info[i].report_id != report_id) {
+			dev_err(&pdev->dev,
+				"not all needed attributes inside the same report!\n");
+			return -EINVAL;
+		}
+		if (time_state->info[i].size == 3 ||
+				time_state->info[i].size > 4) {
+			dev_err(&pdev->dev,
+				"attribute '%s' not 8, 16 or 32 bits wide!\n",
+				hid_time_attrib_name(
+					time_state->info[i].attrib_id));
+			return -EINVAL;
+		}
+		if (time_state->info[i].units !=
+				HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED &&
+				/* allow attribute seconds with unit seconds */
+				!(time_state->info[i].attrib_id ==
+				HID_USAGE_SENSOR_TIME_SECOND &&
+				time_state->info[i].units ==
+				HID_USAGE_SENSOR_UNITS_SECOND)) {
+			dev_err(&pdev->dev,
+				"attribute '%s' hasn't a unit of type 'none'!\n",
+				hid_time_attrib_name(
+					time_state->info[i].attrib_id));
+			return -EINVAL;
+		}
+		if (time_state->info[i].unit_expo) {
+			dev_err(&pdev->dev,
+				"attribute '%s' hasn't a unit exponent of 1!\n",
+				hid_time_attrib_name(
+					time_state->info[i].attrib_id));
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int hid_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long flags;
+	struct hid_time_state *time_state =
+		platform_get_drvdata(to_platform_device(dev));
+	int ret;
+
+	reinit_completion(&time_state->comp_last_time);
+	/* get a report with all values through requesting one value */
+	sensor_hub_input_attr_get_raw_value(time_state->common_attributes.hsdev,
+			HID_USAGE_SENSOR_TIME, hid_time_addresses[0],
+			time_state->info[0].report_id, SENSOR_HUB_SYNC, false);
+	/* wait for all values (event) */
+	ret = wait_for_completion_killable_timeout(
+			&time_state->comp_last_time, HZ*6);
+	if (ret > 0) {
+		/* no error */
+		spin_lock_irqsave(&time_state->lock_last_time, flags);
+		*tm = time_state->last_time;
+		spin_unlock_irqrestore(&time_state->lock_last_time, flags);
+		return 0;
+	}
+	if (!ret)
+		return -EIO; /* timeouted */
+	return ret; /* killed (-ERESTARTSYS) */
+}
+
+static const struct rtc_class_ops hid_time_rtc_ops = {
+	.read_time = hid_rtc_read_time,
+};
+
+static int hid_time_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
+	struct hid_time_state *time_state = devm_kzalloc(&pdev->dev,
+		sizeof(struct hid_time_state), GFP_KERNEL);
+
+	if (time_state == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, time_state);
+
+	spin_lock_init(&time_state->lock_last_time);
+	init_completion(&time_state->comp_last_time);
+	time_state->common_attributes.hsdev = hsdev;
+	time_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+				HID_USAGE_SENSOR_TIME,
+				&time_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes!\n");
+		return ret;
+	}
+
+	ret = hid_time_parse_report(pdev, hsdev, HID_USAGE_SENSOR_TIME,
+					time_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes!\n");
+		return ret;
+	}
+
+	time_state->callbacks.send_event = hid_time_proc_event;
+	time_state->callbacks.capture_sample = hid_time_capture_sample;
+	time_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_TIME,
+					&time_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "register callback failed!\n");
+		return ret;
+	}
+
+	ret = sensor_hub_device_open(hsdev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to open sensor hub device!\n");
+		goto err_open;
+	}
+
+	/*
+	 * Enable HID input processing early in order to be able to read the
+	 * clock already in devm_rtc_device_register().
+	 */
+	hid_device_io_start(hsdev->hdev);
+
+	time_state->rtc = devm_rtc_device_register(&pdev->dev,
+					"hid-sensor-time", &hid_time_rtc_ops,
+					THIS_MODULE);
+
+	if (IS_ERR(time_state->rtc)) {
+		hid_device_io_stop(hsdev->hdev);
+		ret = PTR_ERR(time_state->rtc);
+		time_state->rtc = NULL;
+		dev_err(&pdev->dev, "rtc device register failed!\n");
+		goto err_rtc;
+	}
+
+	return ret;
+
+err_rtc:
+	sensor_hub_device_close(hsdev);
+err_open:
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
+	return ret;
+}
+
+static int hid_time_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
+
+	sensor_hub_device_close(hsdev);
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TIME);
+
+	return 0;
+}
+
+static const struct platform_device_id hid_time_ids[] = {
+	{
+		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+		.name = "HID-SENSOR-2000a0",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_time_ids);
+
+static struct platform_driver hid_time_platform_driver = {
+	.id_table = hid_time_ids,
+	.driver = {
+		.name	= KBUILD_MODNAME,
+	},
+	.probe		= hid_time_probe,
+	.remove		= hid_time_remove,
+};
+module_platform_driver(hid_time_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Time");
+MODULE_AUTHOR("Alexander Holler <holler@ahsoftware.de>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-hym8563.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-hym8563.c
new file mode 100644
index 0000000..a8c2d38
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-hym8563.c
@@ -0,0 +1,610 @@
+/*
+ * Haoyu HYM8563 RTC driver
+ *
+ * Copyright (C) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on rtc-HYM8563
+ * Copyright (C) 2010 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+#define HYM8563_CTL1		0x00
+#define HYM8563_CTL1_TEST	BIT(7)
+#define HYM8563_CTL1_STOP	BIT(5)
+#define HYM8563_CTL1_TESTC	BIT(3)
+
+#define HYM8563_CTL2		0x01
+#define HYM8563_CTL2_TI_TP	BIT(4)
+#define HYM8563_CTL2_AF		BIT(3)
+#define HYM8563_CTL2_TF		BIT(2)
+#define HYM8563_CTL2_AIE	BIT(1)
+#define HYM8563_CTL2_TIE	BIT(0)
+
+#define HYM8563_SEC		0x02
+#define HYM8563_SEC_VL		BIT(7)
+#define HYM8563_SEC_MASK	0x7f
+
+#define HYM8563_MIN		0x03
+#define HYM8563_MIN_MASK	0x7f
+
+#define HYM8563_HOUR		0x04
+#define HYM8563_HOUR_MASK	0x3f
+
+#define HYM8563_DAY		0x05
+#define HYM8563_DAY_MASK	0x3f
+
+#define HYM8563_WEEKDAY		0x06
+#define HYM8563_WEEKDAY_MASK	0x07
+
+#define HYM8563_MONTH		0x07
+#define HYM8563_MONTH_CENTURY	BIT(7)
+#define HYM8563_MONTH_MASK	0x1f
+
+#define HYM8563_YEAR		0x08
+
+#define HYM8563_ALM_MIN		0x09
+#define HYM8563_ALM_HOUR	0x0a
+#define HYM8563_ALM_DAY		0x0b
+#define HYM8563_ALM_WEEK	0x0c
+
+/* Each alarm check can be disabled by setting this bit in the register */
+#define HYM8563_ALM_BIT_DISABLE	BIT(7)
+
+#define HYM8563_CLKOUT		0x0d
+#define HYM8563_CLKOUT_ENABLE	BIT(7)
+#define HYM8563_CLKOUT_32768	0
+#define HYM8563_CLKOUT_1024	1
+#define HYM8563_CLKOUT_32	2
+#define HYM8563_CLKOUT_1	3
+#define HYM8563_CLKOUT_MASK	3
+
+#define HYM8563_TMR_CTL		0x0e
+#define HYM8563_TMR_CTL_ENABLE	BIT(7)
+#define HYM8563_TMR_CTL_4096	0
+#define HYM8563_TMR_CTL_64	1
+#define HYM8563_TMR_CTL_1	2
+#define HYM8563_TMR_CTL_1_60	3
+#define HYM8563_TMR_CTL_MASK	3
+
+#define HYM8563_TMR_CNT		0x0f
+
+struct hym8563 {
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+	bool			valid;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clkout_hw;
+#endif
+};
+
+/*
+ * RTC handling
+ */
+
+static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct hym8563 *hym8563 = i2c_get_clientdata(client);
+	u8 buf[7];
+	int ret;
+
+	if (!hym8563->valid) {
+		dev_warn(&client->dev, "no valid clock/calendar values available\n");
+		return -EINVAL;
+	}
+
+	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
+
+	tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
+	tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
+	tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
+	tm->tm_mday = bcd2bin(buf[3] & HYM8563_DAY_MASK);
+	tm->tm_wday = bcd2bin(buf[4] & HYM8563_WEEKDAY_MASK); /* 0 = Sun */
+	tm->tm_mon = bcd2bin(buf[5] & HYM8563_MONTH_MASK) - 1; /* 0 = Jan */
+	tm->tm_year = bcd2bin(buf[6]) + 100;
+
+	return 0;
+}
+
+static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct hym8563 *hym8563 = i2c_get_clientdata(client);
+	u8 buf[7];
+	int ret;
+
+	/* Years >= 2100 are to far in the future, 19XX is to early */
+	if (tm->tm_year < 100 || tm->tm_year >= 200)
+		return -EINVAL;
+
+	buf[0] = bin2bcd(tm->tm_sec);
+	buf[1] = bin2bcd(tm->tm_min);
+	buf[2] = bin2bcd(tm->tm_hour);
+	buf[3] = bin2bcd(tm->tm_mday);
+	buf[4] = bin2bcd(tm->tm_wday);
+	buf[5] = bin2bcd(tm->tm_mon + 1);
+
+	/*
+	 * While the HYM8563 has a century flag in the month register,
+	 * it does not seem to carry it over a subsequent write/read.
+	 * So we'll limit ourself to 100 years, starting at 2000 for now.
+	 */
+	buf[6] = bin2bcd(tm->tm_year - 100);
+
+	/*
+	 * CTL1 only contains TEST-mode bits apart from stop,
+	 * so no need to read the value first
+	 */
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1,
+						HYM8563_CTL1_STOP);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_i2c_block_data(client, HYM8563_SEC, 7, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
+	if (ret < 0)
+		return ret;
+
+	hym8563->valid = true;
+
+	return 0;
+}
+
+static int hym8563_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int data;
+
+	data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (data < 0)
+		return data;
+
+	if (enabled)
+		data |= HYM8563_CTL2_AIE;
+	else
+		data &= ~HYM8563_CTL2_AIE;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
+};
+
+static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rtc_time *alm_tm = &alm->time;
+	u8 buf[4];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
+	if (ret < 0)
+		return ret;
+
+	/* The alarm only has a minute accuracy */
+	alm_tm->tm_sec = 0;
+
+	alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[0] & HYM8563_MIN_MASK);
+	alm_tm->tm_hour = (buf[1] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[1] & HYM8563_HOUR_MASK);
+	alm_tm->tm_mday = (buf[2] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[2] & HYM8563_DAY_MASK);
+	alm_tm->tm_wday = (buf[3] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & HYM8563_CTL2_AIE)
+		alm->enabled = 1;
+
+	return 0;
+}
+
+static int hym8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rtc_time *alm_tm = &alm->time;
+	u8 buf[4];
+	int ret;
+
+	/*
+	 * The alarm has no seconds so deal with it
+	 */
+	if (alm_tm->tm_sec) {
+		alm_tm->tm_sec = 0;
+		alm_tm->tm_min++;
+		if (alm_tm->tm_min >= 60) {
+			alm_tm->tm_min = 0;
+			alm_tm->tm_hour++;
+			if (alm_tm->tm_hour >= 24) {
+				alm_tm->tm_hour = 0;
+				alm_tm->tm_mday++;
+				if (alm_tm->tm_mday > 31)
+					alm_tm->tm_mday = 0;
+			}
+		}
+	}
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~HYM8563_CTL2_AIE;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
+	if (ret < 0)
+		return ret;
+
+	buf[0] = (alm_tm->tm_min < 60 && alm_tm->tm_min >= 0) ?
+			bin2bcd(alm_tm->tm_min) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[1] = (alm_tm->tm_hour < 24 && alm_tm->tm_hour >= 0) ?
+			bin2bcd(alm_tm->tm_hour) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[2] = (alm_tm->tm_mday <= 31 && alm_tm->tm_mday >= 1) ?
+			bin2bcd(alm_tm->tm_mday) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[3] = (alm_tm->tm_wday < 7 && alm_tm->tm_wday >= 0) ?
+			bin2bcd(alm_tm->tm_wday) : HYM8563_ALM_BIT_DISABLE;
+
+	ret = i2c_smbus_write_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
+	if (ret < 0)
+		return ret;
+
+	return hym8563_rtc_alarm_irq_enable(dev, alm->enabled);
+}
+
+static const struct rtc_class_ops hym8563_rtc_ops = {
+	.read_time		= hym8563_rtc_read_time,
+	.set_time		= hym8563_rtc_set_time,
+	.alarm_irq_enable	= hym8563_rtc_alarm_irq_enable,
+	.read_alarm		= hym8563_rtc_read_alarm,
+	.set_alarm		= hym8563_rtc_set_alarm,
+};
+
+/*
+ * Handling of the clkout
+ */
+
+#ifdef CONFIG_COMMON_CLK
+#define clkout_hw_to_hym8563(_hw) container_of(_hw, struct hym8563, clkout_hw)
+
+static int clkout_rates[] = {
+	32768,
+	1024,
+	32,
+	1,
+};
+
+static unsigned long hym8563_clkout_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return 0;
+
+	ret &= HYM8563_CLKOUT_MASK;
+	return clkout_rates[ret];
+}
+
+static long hym8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= rate)
+			return clkout_rates[i];
+
+	return 0;
+}
+
+static int hym8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+	int i;
+
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate) {
+			ret &= ~HYM8563_CLKOUT_MASK;
+			ret |= i;
+			return i2c_smbus_write_byte_data(client,
+							 HYM8563_CLKOUT, ret);
+		}
+
+	return -EINVAL;
+}
+
+static int hym8563_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		ret |= HYM8563_CLKOUT_ENABLE;
+	else
+		ret &= ~HYM8563_CLKOUT_ENABLE;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CLKOUT, ret);
+}
+
+static int hym8563_clkout_prepare(struct clk_hw *hw)
+{
+	return hym8563_clkout_control(hw, 1);
+}
+
+static void hym8563_clkout_unprepare(struct clk_hw *hw)
+{
+	hym8563_clkout_control(hw, 0);
+}
+
+static int hym8563_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & HYM8563_CLKOUT_ENABLE);
+}
+
+static const struct clk_ops hym8563_clkout_ops = {
+	.prepare = hym8563_clkout_prepare,
+	.unprepare = hym8563_clkout_unprepare,
+	.is_prepared = hym8563_clkout_is_prepared,
+	.recalc_rate = hym8563_clkout_recalc_rate,
+	.round_rate = hym8563_clkout_round_rate,
+	.set_rate = hym8563_clkout_set_rate,
+};
+
+static struct clk *hym8563_clkout_register_clk(struct hym8563 *hym8563)
+{
+	struct i2c_client *client = hym8563->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk *clk;
+	struct clk_init_data init;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CLKOUT,
+						0);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	init.name = "hym8563-clkout";
+	init.ops = &hym8563_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	hym8563->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = clk_register(&client->dev, &hym8563->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+/*
+ * The alarm interrupt is implemented as a level-low interrupt in the
+ * hym8563, while the timer interrupt uses a falling edge.
+ * We don't use the timer at all, so the interrupt is requested to
+ * use the level-low trigger.
+ */
+static irqreturn_t hym8563_irq(int irq, void *dev_id)
+{
+	struct hym8563 *hym8563 = (struct hym8563 *)dev_id;
+	struct i2c_client *client = hym8563->client;
+	struct mutex *lock = &hym8563->rtc->ops_lock;
+	int data, ret;
+
+	mutex_lock(lock);
+
+	/* Clear the alarm flag */
+
+	data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (data < 0) {
+		dev_err(&client->dev, "%s: error reading i2c data %d\n",
+			__func__, data);
+		goto out;
+	}
+
+	data &= ~HYM8563_CTL2_AF;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: error writing i2c data %d\n",
+			__func__, ret);
+	}
+
+out:
+	mutex_unlock(lock);
+	return IRQ_HANDLED;
+}
+
+static int hym8563_init_device(struct i2c_client *client)
+{
+	int ret;
+
+	/* Clear stop flag if present */
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	/* Disable alarm and timer interrupts */
+	ret &= ~HYM8563_CTL2_AIE;
+	ret &= ~HYM8563_CTL2_TIE;
+
+	/* Clear any pending alarm and timer flags */
+	if (ret & HYM8563_CTL2_AF)
+		ret &= ~HYM8563_CTL2_AF;
+
+	if (ret & HYM8563_CTL2_TF)
+		ret &= ~HYM8563_CTL2_TF;
+
+	ret &= ~HYM8563_CTL2_TI_TP;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hym8563_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	if (device_may_wakeup(dev)) {
+		ret = enable_irq_wake(client->irq);
+		if (ret) {
+			dev_err(dev, "enable_irq_wake failed, %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int hym8563_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume);
+
+static int hym8563_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct hym8563 *hym8563;
+	int ret;
+
+	hym8563 = devm_kzalloc(&client->dev, sizeof(*hym8563), GFP_KERNEL);
+	if (!hym8563)
+		return -ENOMEM;
+
+	hym8563->client = client;
+	i2c_set_clientdata(client, hym8563);
+
+	device_set_wakeup_capable(&client->dev, true);
+
+	ret = hym8563_init_device(client);
+	if (ret) {
+		dev_err(&client->dev, "could not init device, %d\n", ret);
+		return ret;
+	}
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, hym8563_irq,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						client->name, hym8563);
+		if (ret < 0) {
+			dev_err(&client->dev, "irq %d request failed, %d\n",
+				client->irq, ret);
+			return ret;
+		}
+	}
+
+	/* check state of calendar information */
+	ret = i2c_smbus_read_byte_data(client, HYM8563_SEC);
+	if (ret < 0)
+		return ret;
+
+	hym8563->valid = !(ret & HYM8563_SEC_VL);
+	dev_dbg(&client->dev, "rtc information is %s\n",
+		hym8563->valid ? "valid" : "invalid");
+
+	hym8563->rtc = devm_rtc_device_register(&client->dev, client->name,
+						&hym8563_rtc_ops, THIS_MODULE);
+	if (IS_ERR(hym8563->rtc))
+		return PTR_ERR(hym8563->rtc);
+
+	/* the hym8563 alarm only supports a minute accuracy */
+	hym8563->rtc->uie_unsupported = 1;
+
+#ifdef CONFIG_COMMON_CLK
+	hym8563_clkout_register_clk(hym8563);
+#endif
+
+	return 0;
+}
+
+static const struct i2c_device_id hym8563_id[] = {
+	{ "hym8563", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, hym8563_id);
+
+static const struct of_device_id hym8563_dt_idtable[] = {
+	{ .compatible = "haoyu,hym8563" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hym8563_dt_idtable);
+
+static struct i2c_driver hym8563_driver = {
+	.driver		= {
+		.name	= "rtc-hym8563",
+		.pm	= &hym8563_pm_ops,
+		.of_match_table	= hym8563_dt_idtable,
+	},
+	.probe		= hym8563_probe,
+	.id_table	= hym8563_id,
+};
+
+module_i2c_driver(hym8563_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("HYM8563 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-imxdi.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-imxdi.c
new file mode 100644
index 0000000..8093111
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-imxdi.c
@@ -0,0 +1,883 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2010 Orex Computed Radiography
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* based on rtc-mc13892.c */
+
+/*
+ * This driver uses the 47-bit 32 kHz counter in the Freescale DryIce block
+ * to implement a Linux RTC. Times and alarms are truncated to seconds.
+ * Since the RTC framework performs API locking via rtc->ops_lock the
+ * only simultaneous accesses we need to deal with is updating DryIce
+ * registers while servicing an alarm.
+ *
+ * Note that reading the DSR (DryIce Status Register) automatically clears
+ * the WCF (Write Complete Flag). All DryIce writes are synchronized to the
+ * LP (Low Power) domain and set the WCF upon completion. Writes to the
+ * DIER (DryIce Interrupt Enable Register) are the only exception. These
+ * occur at normal bus speeds and do not set WCF.  Periodic interrupts are
+ * not supported by the hardware.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/of.h>
+
+/* DryIce Register Definitions */
+
+#define DTCMR     0x00           /* Time Counter MSB Reg */
+#define DTCLR     0x04           /* Time Counter LSB Reg */
+
+#define DCAMR     0x08           /* Clock Alarm MSB Reg */
+#define DCALR     0x0c           /* Clock Alarm LSB Reg */
+#define DCAMR_UNSET  0xFFFFFFFF  /* doomsday - 1 sec */
+
+#define DCR       0x10           /* Control Reg */
+#define DCR_TDCHL (1 << 30)      /* Tamper-detect configuration hard lock */
+#define DCR_TDCSL (1 << 29)      /* Tamper-detect configuration soft lock */
+#define DCR_KSSL  (1 << 27)      /* Key-select soft lock */
+#define DCR_MCHL  (1 << 20)      /* Monotonic-counter hard lock */
+#define DCR_MCSL  (1 << 19)      /* Monotonic-counter soft lock */
+#define DCR_TCHL  (1 << 18)      /* Timer-counter hard lock */
+#define DCR_TCSL  (1 << 17)      /* Timer-counter soft lock */
+#define DCR_FSHL  (1 << 16)      /* Failure state hard lock */
+#define DCR_TCE   (1 << 3)       /* Time Counter Enable */
+#define DCR_MCE   (1 << 2)       /* Monotonic Counter Enable */
+
+#define DSR       0x14           /* Status Reg */
+#define DSR_WTD   (1 << 23)      /* Wire-mesh tamper detected */
+#define DSR_ETBD  (1 << 22)      /* External tamper B detected */
+#define DSR_ETAD  (1 << 21)      /* External tamper A detected */
+#define DSR_EBD   (1 << 20)      /* External boot detected */
+#define DSR_SAD   (1 << 19)      /* SCC alarm detected */
+#define DSR_TTD   (1 << 18)      /* Temperature tamper detected */
+#define DSR_CTD   (1 << 17)      /* Clock tamper detected */
+#define DSR_VTD   (1 << 16)      /* Voltage tamper detected */
+#define DSR_WBF   (1 << 10)      /* Write Busy Flag (synchronous) */
+#define DSR_WNF   (1 << 9)       /* Write Next Flag (synchronous) */
+#define DSR_WCF   (1 << 8)       /* Write Complete Flag (synchronous)*/
+#define DSR_WEF   (1 << 7)       /* Write Error Flag */
+#define DSR_CAF   (1 << 4)       /* Clock Alarm Flag */
+#define DSR_MCO   (1 << 3)       /* monotonic counter overflow */
+#define DSR_TCO   (1 << 2)       /* time counter overflow */
+#define DSR_NVF   (1 << 1)       /* Non-Valid Flag */
+#define DSR_SVF   (1 << 0)       /* Security Violation Flag */
+
+#define DIER      0x18           /* Interrupt Enable Reg (synchronous) */
+#define DIER_WNIE (1 << 9)       /* Write Next Interrupt Enable */
+#define DIER_WCIE (1 << 8)       /* Write Complete Interrupt Enable */
+#define DIER_WEIE (1 << 7)       /* Write Error Interrupt Enable */
+#define DIER_CAIE (1 << 4)       /* Clock Alarm Interrupt Enable */
+#define DIER_SVIE (1 << 0)       /* Security-violation Interrupt Enable */
+
+#define DMCR      0x1c           /* DryIce Monotonic Counter Reg */
+
+#define DTCR      0x28           /* DryIce Tamper Configuration Reg */
+#define DTCR_MOE  (1 << 9)       /* monotonic overflow enabled */
+#define DTCR_TOE  (1 << 8)       /* time overflow enabled */
+#define DTCR_WTE  (1 << 7)       /* wire-mesh tamper enabled */
+#define DTCR_ETBE (1 << 6)       /* external B tamper enabled */
+#define DTCR_ETAE (1 << 5)       /* external A tamper enabled */
+#define DTCR_EBE  (1 << 4)       /* external boot tamper enabled */
+#define DTCR_SAIE (1 << 3)       /* SCC enabled */
+#define DTCR_TTE  (1 << 2)       /* temperature tamper enabled */
+#define DTCR_CTE  (1 << 1)       /* clock tamper enabled */
+#define DTCR_VTE  (1 << 0)       /* voltage tamper enabled */
+
+#define DGPR      0x3c           /* DryIce General Purpose Reg */
+
+/**
+ * struct imxdi_dev - private imxdi rtc data
+ * @pdev: pionter to platform dev
+ * @rtc: pointer to rtc struct
+ * @ioaddr: IO registers pointer
+ * @clk: input reference clock
+ * @dsr: copy of the DSR register
+ * @irq_lock: interrupt enable register (DIER) lock
+ * @write_wait: registers write complete queue
+ * @write_mutex: serialize registers write
+ * @work: schedule alarm work
+ */
+struct imxdi_dev {
+	struct platform_device *pdev;
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	struct clk *clk;
+	u32 dsr;
+	spinlock_t irq_lock;
+	wait_queue_head_t write_wait;
+	struct mutex write_mutex;
+	struct work_struct work;
+};
+
+/* Some background:
+ *
+ * The DryIce unit is a complex security/tamper monitor device. To be able do
+ * its job in a useful manner it runs a bigger statemachine to bring it into
+ * security/tamper failure state and once again to bring it out of this state.
+ *
+ * This unit can be in one of three states:
+ *
+ * - "NON-VALID STATE"
+ *   always after the battery power was removed
+ * - "FAILURE STATE"
+ *   if one of the enabled security events has happened
+ * - "VALID STATE"
+ *   if the unit works as expected
+ *
+ * Everything stops when the unit enters the failure state including the RTC
+ * counter (to be able to detect the time the security event happened).
+ *
+ * The following events (when enabled) let the DryIce unit enter the failure
+ * state:
+ *
+ * - wire-mesh-tamper detect
+ * - external tamper B detect
+ * - external tamper A detect
+ * - temperature tamper detect
+ * - clock tamper detect
+ * - voltage tamper detect
+ * - RTC counter overflow
+ * - monotonic counter overflow
+ * - external boot
+ *
+ * If we find the DryIce unit in "FAILURE STATE" and the TDCHL cleared, we
+ * can only detect this state. In this case the unit is completely locked and
+ * must force a second "SYSTEM POR" to bring the DryIce into the
+ * "NON-VALID STATE" + "FAILURE STATE" where a recovery is possible.
+ * If the TDCHL is set in the "FAILURE STATE" we are out of luck. In this case
+ * a battery power cycle is required.
+ *
+ * In the "NON-VALID STATE" + "FAILURE STATE" we can clear the "FAILURE STATE"
+ * and recover the DryIce unit. By clearing the "NON-VALID STATE" as the last
+ * task, we bring back this unit into life.
+ */
+
+/*
+ * Do a write into the unit without interrupt support.
+ * We do not need to check the WEF here, because the only reason this kind of
+ * write error can happen is if we write to the unit twice within the 122 us
+ * interval. This cannot happen, since we are using this function only while
+ * setting up the unit.
+ */
+static void di_write_busy_wait(const struct imxdi_dev *imxdi, u32 val,
+			       unsigned reg)
+{
+	/* do the register write */
+	writel(val, imxdi->ioaddr + reg);
+
+	/*
+	 * now it takes four 32,768 kHz clock cycles to take
+	 * the change into effect = 122 us
+	 */
+	usleep_range(130, 200);
+}
+
+static void di_report_tamper_info(struct imxdi_dev *imxdi,  u32 dsr)
+{
+	u32 dtcr;
+
+	dtcr = readl(imxdi->ioaddr + DTCR);
+
+	dev_emerg(&imxdi->pdev->dev, "DryIce tamper event detected\n");
+	/* the following flags force a transition into the "FAILURE STATE" */
+	if (dsr & DSR_VTD)
+		dev_emerg(&imxdi->pdev->dev, "%sVoltage Tamper Event\n",
+			  dtcr & DTCR_VTE ? "" : "Spurious ");
+
+	if (dsr & DSR_CTD)
+		dev_emerg(&imxdi->pdev->dev, "%s32768 Hz Clock Tamper Event\n",
+			  dtcr & DTCR_CTE ? "" : "Spurious ");
+
+	if (dsr & DSR_TTD)
+		dev_emerg(&imxdi->pdev->dev, "%sTemperature Tamper Event\n",
+			  dtcr & DTCR_TTE ? "" : "Spurious ");
+
+	if (dsr & DSR_SAD)
+		dev_emerg(&imxdi->pdev->dev,
+			  "%sSecure Controller Alarm Event\n",
+			  dtcr & DTCR_SAIE ? "" : "Spurious ");
+
+	if (dsr & DSR_EBD)
+		dev_emerg(&imxdi->pdev->dev, "%sExternal Boot Tamper Event\n",
+			  dtcr & DTCR_EBE ? "" : "Spurious ");
+
+	if (dsr & DSR_ETAD)
+		dev_emerg(&imxdi->pdev->dev, "%sExternal Tamper A Event\n",
+			  dtcr & DTCR_ETAE ? "" : "Spurious ");
+
+	if (dsr & DSR_ETBD)
+		dev_emerg(&imxdi->pdev->dev, "%sExternal Tamper B Event\n",
+			  dtcr & DTCR_ETBE ? "" : "Spurious ");
+
+	if (dsr & DSR_WTD)
+		dev_emerg(&imxdi->pdev->dev, "%sWire-mesh Tamper Event\n",
+			  dtcr & DTCR_WTE ? "" : "Spurious ");
+
+	if (dsr & DSR_MCO)
+		dev_emerg(&imxdi->pdev->dev,
+			  "%sMonotonic-counter Overflow Event\n",
+			  dtcr & DTCR_MOE ? "" : "Spurious ");
+
+	if (dsr & DSR_TCO)
+		dev_emerg(&imxdi->pdev->dev, "%sTimer-counter Overflow Event\n",
+			  dtcr & DTCR_TOE ? "" : "Spurious ");
+}
+
+static void di_what_is_to_be_done(struct imxdi_dev *imxdi,
+				  const char *power_supply)
+{
+	dev_emerg(&imxdi->pdev->dev, "Please cycle the %s power supply in order to get the DryIce/RTC unit working again\n",
+		  power_supply);
+}
+
+static int di_handle_failure_state(struct imxdi_dev *imxdi, u32 dsr)
+{
+	u32 dcr;
+
+	dev_dbg(&imxdi->pdev->dev, "DSR register reports: %08X\n", dsr);
+
+	/* report the cause */
+	di_report_tamper_info(imxdi, dsr);
+
+	dcr = readl(imxdi->ioaddr + DCR);
+
+	if (dcr & DCR_FSHL) {
+		/* we are out of luck */
+		di_what_is_to_be_done(imxdi, "battery");
+		return -ENODEV;
+	}
+	/*
+	 * with the next SYSTEM POR we will transit from the "FAILURE STATE"
+	 * into the "NON-VALID STATE" + "FAILURE STATE"
+	 */
+	di_what_is_to_be_done(imxdi, "main");
+
+	return -ENODEV;
+}
+
+static int di_handle_valid_state(struct imxdi_dev *imxdi, u32 dsr)
+{
+	/* initialize alarm */
+	di_write_busy_wait(imxdi, DCAMR_UNSET, DCAMR);
+	di_write_busy_wait(imxdi, 0, DCALR);
+
+	/* clear alarm flag */
+	if (dsr & DSR_CAF)
+		di_write_busy_wait(imxdi, DSR_CAF, DSR);
+
+	return 0;
+}
+
+static int di_handle_invalid_state(struct imxdi_dev *imxdi, u32 dsr)
+{
+	u32 dcr, sec;
+
+	/*
+	 * lets disable all sources which can force the DryIce unit into
+	 * the "FAILURE STATE" for now
+	 */
+	di_write_busy_wait(imxdi, 0x00000000, DTCR);
+	/* and lets protect them at runtime from any change */
+	di_write_busy_wait(imxdi, DCR_TDCSL, DCR);
+
+	sec = readl(imxdi->ioaddr + DTCMR);
+	if (sec != 0)
+		dev_warn(&imxdi->pdev->dev,
+			 "The security violation has happened at %u seconds\n",
+			 sec);
+	/*
+	 * the timer cannot be set/modified if
+	 * - the TCHL or TCSL bit is set in DCR
+	 */
+	dcr = readl(imxdi->ioaddr + DCR);
+	if (!(dcr & DCR_TCE)) {
+		if (dcr & DCR_TCHL) {
+			/* we are out of luck */
+			di_what_is_to_be_done(imxdi, "battery");
+			return -ENODEV;
+		}
+		if (dcr & DCR_TCSL) {
+			di_what_is_to_be_done(imxdi, "main");
+			return -ENODEV;
+		}
+	}
+	/*
+	 * - the timer counter stops/is stopped if
+	 *   - its overflow flag is set (TCO in DSR)
+	 *      -> clear overflow bit to make it count again
+	 *   - NVF is set in DSR
+	 *      -> clear non-valid bit to make it count again
+	 *   - its TCE (DCR) is cleared
+	 *      -> set TCE to make it count
+	 *   - it was never set before
+	 *      -> write a time into it (required again if the NVF was set)
+	 */
+	/* state handled */
+	di_write_busy_wait(imxdi, DSR_NVF, DSR);
+	/* clear overflow flag */
+	di_write_busy_wait(imxdi, DSR_TCO, DSR);
+	/* enable the counter */
+	di_write_busy_wait(imxdi, dcr | DCR_TCE, DCR);
+	/* set and trigger it to make it count */
+	di_write_busy_wait(imxdi, sec, DTCMR);
+
+	/* now prepare for the valid state */
+	return di_handle_valid_state(imxdi, __raw_readl(imxdi->ioaddr + DSR));
+}
+
+static int di_handle_invalid_and_failure_state(struct imxdi_dev *imxdi, u32 dsr)
+{
+	u32 dcr;
+
+	/*
+	 * now we must first remove the tamper sources in order to get the
+	 * device out of the "FAILURE STATE"
+	 * To disable any of the following sources we need to modify the DTCR
+	 */
+	if (dsr & (DSR_WTD | DSR_ETBD | DSR_ETAD | DSR_EBD | DSR_SAD |
+			DSR_TTD | DSR_CTD | DSR_VTD | DSR_MCO | DSR_TCO)) {
+		dcr = __raw_readl(imxdi->ioaddr + DCR);
+		if (dcr & DCR_TDCHL) {
+			/*
+			 * the tamper register is locked. We cannot disable the
+			 * tamper detection. The TDCHL can only be reset by a
+			 * DRYICE POR, but we cannot force a DRYICE POR in
+			 * softwere because we are still in "FAILURE STATE".
+			 * We need a DRYICE POR via battery power cycling....
+			 */
+			/*
+			 * out of luck!
+			 * we cannot disable them without a DRYICE POR
+			 */
+			di_what_is_to_be_done(imxdi, "battery");
+			return -ENODEV;
+		}
+		if (dcr & DCR_TDCSL) {
+			/* a soft lock can be removed by a SYSTEM POR */
+			di_what_is_to_be_done(imxdi, "main");
+			return -ENODEV;
+		}
+	}
+
+	/* disable all sources */
+	di_write_busy_wait(imxdi, 0x00000000, DTCR);
+
+	/* clear the status bits now */
+	di_write_busy_wait(imxdi, dsr & (DSR_WTD | DSR_ETBD | DSR_ETAD |
+			DSR_EBD | DSR_SAD | DSR_TTD | DSR_CTD | DSR_VTD |
+			DSR_MCO | DSR_TCO), DSR);
+
+	dsr = readl(imxdi->ioaddr + DSR);
+	if ((dsr & ~(DSR_NVF | DSR_SVF | DSR_WBF | DSR_WNF |
+			DSR_WCF | DSR_WEF)) != 0)
+		dev_warn(&imxdi->pdev->dev,
+			 "There are still some sources of pain in DSR: %08x!\n",
+			 dsr & ~(DSR_NVF | DSR_SVF | DSR_WBF | DSR_WNF |
+				 DSR_WCF | DSR_WEF));
+
+	/*
+	 * now we are trying to clear the "Security-violation flag" to
+	 * get the DryIce out of this state
+	 */
+	di_write_busy_wait(imxdi, DSR_SVF, DSR);
+
+	/* success? */
+	dsr = readl(imxdi->ioaddr + DSR);
+	if (dsr & DSR_SVF) {
+		dev_crit(&imxdi->pdev->dev,
+			 "Cannot clear the security violation flag. We are ending up in an endless loop!\n");
+		/* last resort */
+		di_what_is_to_be_done(imxdi, "battery");
+		return -ENODEV;
+	}
+
+	/*
+	 * now we have left the "FAILURE STATE" and ending up in the
+	 * "NON-VALID STATE" time to recover everything
+	 */
+	return di_handle_invalid_state(imxdi, dsr);
+}
+
+static int di_handle_state(struct imxdi_dev *imxdi)
+{
+	int rc;
+	u32 dsr;
+
+	dsr = readl(imxdi->ioaddr + DSR);
+
+	switch (dsr & (DSR_NVF | DSR_SVF)) {
+	case DSR_NVF:
+		dev_warn(&imxdi->pdev->dev, "Invalid stated unit detected\n");
+		rc = di_handle_invalid_state(imxdi, dsr);
+		break;
+	case DSR_SVF:
+		dev_warn(&imxdi->pdev->dev, "Failure stated unit detected\n");
+		rc = di_handle_failure_state(imxdi, dsr);
+		break;
+	case DSR_NVF | DSR_SVF:
+		dev_warn(&imxdi->pdev->dev,
+			 "Failure+Invalid stated unit detected\n");
+		rc = di_handle_invalid_and_failure_state(imxdi, dsr);
+		break;
+	default:
+		dev_notice(&imxdi->pdev->dev, "Unlocked unit detected\n");
+		rc = di_handle_valid_state(imxdi, dsr);
+	}
+
+	return rc;
+}
+
+/*
+ * enable a dryice interrupt
+ */
+static void di_int_enable(struct imxdi_dev *imxdi, u32 intr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&imxdi->irq_lock, flags);
+	writel(readl(imxdi->ioaddr + DIER) | intr,
+	       imxdi->ioaddr + DIER);
+	spin_unlock_irqrestore(&imxdi->irq_lock, flags);
+}
+
+/*
+ * disable a dryice interrupt
+ */
+static void di_int_disable(struct imxdi_dev *imxdi, u32 intr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&imxdi->irq_lock, flags);
+	writel(readl(imxdi->ioaddr + DIER) & ~intr,
+	       imxdi->ioaddr + DIER);
+	spin_unlock_irqrestore(&imxdi->irq_lock, flags);
+}
+
+/*
+ * This function attempts to clear the dryice write-error flag.
+ *
+ * A dryice write error is similar to a bus fault and should not occur in
+ * normal operation.  Clearing the flag requires another write, so the root
+ * cause of the problem may need to be fixed before the flag can be cleared.
+ */
+static void clear_write_error(struct imxdi_dev *imxdi)
+{
+	int cnt;
+
+	dev_warn(&imxdi->pdev->dev, "WARNING: Register write error!\n");
+
+	/* clear the write error flag */
+	writel(DSR_WEF, imxdi->ioaddr + DSR);
+
+	/* wait for it to take effect */
+	for (cnt = 0; cnt < 1000; cnt++) {
+		if ((readl(imxdi->ioaddr + DSR) & DSR_WEF) == 0)
+			return;
+		udelay(10);
+	}
+	dev_err(&imxdi->pdev->dev,
+			"ERROR: Cannot clear write-error flag!\n");
+}
+
+/*
+ * Write a dryice register and wait until it completes.
+ *
+ * This function uses interrupts to determine when the
+ * write has completed.
+ */
+static int di_write_wait(struct imxdi_dev *imxdi, u32 val, int reg)
+{
+	int ret;
+	int rc = 0;
+
+	/* serialize register writes */
+	mutex_lock(&imxdi->write_mutex);
+
+	/* enable the write-complete interrupt */
+	di_int_enable(imxdi, DIER_WCIE);
+
+	imxdi->dsr = 0;
+
+	/* do the register write */
+	writel(val, imxdi->ioaddr + reg);
+
+	/* wait for the write to finish */
+	ret = wait_event_interruptible_timeout(imxdi->write_wait,
+			imxdi->dsr & (DSR_WCF | DSR_WEF), msecs_to_jiffies(1));
+	if (ret < 0) {
+		rc = ret;
+		goto out;
+	} else if (ret == 0) {
+		dev_warn(&imxdi->pdev->dev,
+				"Write-wait timeout "
+				"val = 0x%08x reg = 0x%08x\n", val, reg);
+	}
+
+	/* check for write error */
+	if (imxdi->dsr & DSR_WEF) {
+		clear_write_error(imxdi);
+		rc = -EIO;
+	}
+
+out:
+	mutex_unlock(&imxdi->write_mutex);
+
+	return rc;
+}
+
+/*
+ * read the seconds portion of the current time from the dryice time counter
+ */
+static int dryice_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+	unsigned long now;
+
+	now = readl(imxdi->ioaddr + DTCMR);
+	rtc_time_to_tm(now, tm);
+
+	return 0;
+}
+
+/*
+ * set the seconds portion of dryice time counter and clear the
+ * fractional part.
+ */
+static int dryice_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+	u32 dcr, dsr;
+	int rc;
+
+	dcr = readl(imxdi->ioaddr + DCR);
+	dsr = readl(imxdi->ioaddr + DSR);
+
+	if (!(dcr & DCR_TCE) || (dsr & DSR_SVF)) {
+		if (dcr & DCR_TCHL) {
+			/* we are even more out of luck */
+			di_what_is_to_be_done(imxdi, "battery");
+			return -EPERM;
+		}
+		if ((dcr & DCR_TCSL) || (dsr & DSR_SVF)) {
+			/* we are out of luck for now */
+			di_what_is_to_be_done(imxdi, "main");
+			return -EPERM;
+		}
+	}
+
+	/* zero the fractional part first */
+	rc = di_write_wait(imxdi, 0, DTCLR);
+	if (rc != 0)
+		return rc;
+
+	rc = di_write_wait(imxdi, secs, DTCMR);
+	if (rc != 0)
+		return rc;
+
+	return di_write_wait(imxdi, readl(imxdi->ioaddr + DCR) | DCR_TCE, DCR);
+}
+
+static int dryice_rtc_alarm_irq_enable(struct device *dev,
+		unsigned int enabled)
+{
+	struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+
+	if (enabled)
+		di_int_enable(imxdi, DIER_CAIE);
+	else
+		di_int_disable(imxdi, DIER_CAIE);
+
+	return 0;
+}
+
+/*
+ * read the seconds portion of the alarm register.
+ * the fractional part of the alarm register is always zero.
+ */
+static int dryice_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+	u32 dcamr;
+
+	dcamr = readl(imxdi->ioaddr + DCAMR);
+	rtc_time_to_tm(dcamr, &alarm->time);
+
+	/* alarm is enabled if the interrupt is enabled */
+	alarm->enabled = (readl(imxdi->ioaddr + DIER) & DIER_CAIE) != 0;
+
+	/* don't allow the DSR read to mess up DSR_WCF */
+	mutex_lock(&imxdi->write_mutex);
+
+	/* alarm is pending if the alarm flag is set */
+	alarm->pending = (readl(imxdi->ioaddr + DSR) & DSR_CAF) != 0;
+
+	mutex_unlock(&imxdi->write_mutex);
+
+	return 0;
+}
+
+/*
+ * set the seconds portion of dryice alarm register
+ */
+static int dryice_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct imxdi_dev *imxdi = dev_get_drvdata(dev);
+	unsigned long now;
+	unsigned long alarm_time;
+	int rc;
+
+	rc = rtc_tm_to_time(&alarm->time, &alarm_time);
+	if (rc)
+		return rc;
+
+	/* don't allow setting alarm in the past */
+	now = readl(imxdi->ioaddr + DTCMR);
+	if (alarm_time < now)
+		return -EINVAL;
+
+	/* write the new alarm time */
+	rc = di_write_wait(imxdi, (u32)alarm_time, DCAMR);
+	if (rc)
+		return rc;
+
+	if (alarm->enabled)
+		di_int_enable(imxdi, DIER_CAIE);  /* enable alarm intr */
+	else
+		di_int_disable(imxdi, DIER_CAIE); /* disable alarm intr */
+
+	return 0;
+}
+
+static const struct rtc_class_ops dryice_rtc_ops = {
+	.read_time		= dryice_rtc_read_time,
+	.set_mmss		= dryice_rtc_set_mmss,
+	.alarm_irq_enable	= dryice_rtc_alarm_irq_enable,
+	.read_alarm		= dryice_rtc_read_alarm,
+	.set_alarm		= dryice_rtc_set_alarm,
+};
+
+/*
+ * interrupt handler for dryice "normal" and security violation interrupt
+ */
+static irqreturn_t dryice_irq(int irq, void *dev_id)
+{
+	struct imxdi_dev *imxdi = dev_id;
+	u32 dsr, dier;
+	irqreturn_t rc = IRQ_NONE;
+
+	dier = readl(imxdi->ioaddr + DIER);
+	dsr = readl(imxdi->ioaddr + DSR);
+
+	/* handle the security violation event */
+	if (dier & DIER_SVIE) {
+		if (dsr & DSR_SVF) {
+			/*
+			 * Disable the interrupt when this kind of event has
+			 * happened.
+			 * There cannot be more than one event of this type,
+			 * because it needs a complex state change
+			 * including a main power cycle to get again out of
+			 * this state.
+			 */
+			di_int_disable(imxdi, DIER_SVIE);
+			/* report the violation */
+			di_report_tamper_info(imxdi, dsr);
+			rc = IRQ_HANDLED;
+		}
+	}
+
+	/* handle write complete and write error cases */
+	if (dier & DIER_WCIE) {
+		/*If the write wait queue is empty then there is no pending
+		  operations. It means the interrupt is for DryIce -Security.
+		  IRQ must be returned as none.*/
+		if (list_empty_careful(&imxdi->write_wait.head))
+			return rc;
+
+		/* DSR_WCF clears itself on DSR read */
+		if (dsr & (DSR_WCF | DSR_WEF)) {
+			/* mask the interrupt */
+			di_int_disable(imxdi, DIER_WCIE);
+
+			/* save the dsr value for the wait queue */
+			imxdi->dsr |= dsr;
+
+			wake_up_interruptible(&imxdi->write_wait);
+			rc = IRQ_HANDLED;
+		}
+	}
+
+	/* handle the alarm case */
+	if (dier & DIER_CAIE) {
+		/* DSR_WCF clears itself on DSR read */
+		if (dsr & DSR_CAF) {
+			/* mask the interrupt */
+			di_int_disable(imxdi, DIER_CAIE);
+
+			/* finish alarm in user context */
+			schedule_work(&imxdi->work);
+			rc = IRQ_HANDLED;
+		}
+	}
+	return rc;
+}
+
+/*
+ * post the alarm event from user context so it can sleep
+ * on the write completion.
+ */
+static void dryice_work(struct work_struct *work)
+{
+	struct imxdi_dev *imxdi = container_of(work,
+			struct imxdi_dev, work);
+
+	/* dismiss the interrupt (ignore error) */
+	di_write_wait(imxdi, DSR_CAF, DSR);
+
+	/* pass the alarm event to the rtc framework. */
+	rtc_update_irq(imxdi->rtc, 1, RTC_AF | RTC_IRQF);
+}
+
+/*
+ * probe for dryice rtc device
+ */
+static int __init dryice_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct imxdi_dev *imxdi;
+	int norm_irq, sec_irq;
+	int rc;
+
+	imxdi = devm_kzalloc(&pdev->dev, sizeof(*imxdi), GFP_KERNEL);
+	if (!imxdi)
+		return -ENOMEM;
+
+	imxdi->pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imxdi->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(imxdi->ioaddr))
+		return PTR_ERR(imxdi->ioaddr);
+
+	spin_lock_init(&imxdi->irq_lock);
+
+	norm_irq = platform_get_irq(pdev, 0);
+	if (norm_irq < 0)
+		return norm_irq;
+
+	/* the 2nd irq is the security violation irq
+	 * make this optional, don't break the device tree ABI
+	 */
+	sec_irq = platform_get_irq(pdev, 1);
+	if (sec_irq <= 0)
+		sec_irq = IRQ_NOTCONNECTED;
+
+	init_waitqueue_head(&imxdi->write_wait);
+
+	INIT_WORK(&imxdi->work, dryice_work);
+
+	mutex_init(&imxdi->write_mutex);
+
+	imxdi->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(imxdi->clk))
+		return PTR_ERR(imxdi->clk);
+	rc = clk_prepare_enable(imxdi->clk);
+	if (rc)
+		return rc;
+
+	/*
+	 * Initialize dryice hardware
+	 */
+
+	/* mask all interrupts */
+	writel(0, imxdi->ioaddr + DIER);
+
+	rc = di_handle_state(imxdi);
+	if (rc != 0)
+		goto err;
+
+	rc = devm_request_irq(&pdev->dev, norm_irq, dryice_irq,
+			      IRQF_SHARED, pdev->name, imxdi);
+	if (rc) {
+		dev_warn(&pdev->dev, "interrupt not available.\n");
+		goto err;
+	}
+
+	rc = devm_request_irq(&pdev->dev, sec_irq, dryice_irq,
+			      IRQF_SHARED, pdev->name, imxdi);
+	if (rc) {
+		dev_warn(&pdev->dev, "security violation interrupt not available.\n");
+		/* this is not an error, see above */
+	}
+
+	platform_set_drvdata(pdev, imxdi);
+	imxdi->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				  &dryice_rtc_ops, THIS_MODULE);
+	if (IS_ERR(imxdi->rtc)) {
+		rc = PTR_ERR(imxdi->rtc);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(imxdi->clk);
+
+	return rc;
+}
+
+static int __exit dryice_rtc_remove(struct platform_device *pdev)
+{
+	struct imxdi_dev *imxdi = platform_get_drvdata(pdev);
+
+	flush_work(&imxdi->work);
+
+	/* mask all interrupts */
+	writel(0, imxdi->ioaddr + DIER);
+
+	clk_disable_unprepare(imxdi->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id dryice_dt_ids[] = {
+	{ .compatible = "fsl,imx25-rtc" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, dryice_dt_ids);
+#endif
+
+static struct platform_driver dryice_rtc_driver = {
+	.driver = {
+		   .name = "imxdi_rtc",
+		   .of_match_table = of_match_ptr(dryice_dt_ids),
+		   },
+	.remove = __exit_p(dryice_rtc_remove),
+};
+
+module_platform_driver_probe(dryice_rtc_driver, dryice_rtc_probe);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("IMX DryIce Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-isl12022.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-isl12022.c
new file mode 100644
index 0000000..38586a0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-isl12022.c
@@ -0,0 +1,297 @@
+/*
+ * An I2C driver for the Intersil ISL 12022
+ *
+ * Author: Roman Fietze <roman.fietze@telemotive.de>
+ *
+ * Based on the Philips PCF8563 RTC
+ * by Alessandro Zummo <a.zummo@towertech.it>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* ISL register offsets */
+#define ISL12022_REG_SC		0x00
+#define ISL12022_REG_MN		0x01
+#define ISL12022_REG_HR		0x02
+#define ISL12022_REG_DT		0x03
+#define ISL12022_REG_MO		0x04
+#define ISL12022_REG_YR		0x05
+#define ISL12022_REG_DW		0x06
+
+#define ISL12022_REG_SR		0x07
+#define ISL12022_REG_INT	0x08
+
+/* ISL register bits */
+#define ISL12022_HR_MIL		(1 << 7)	/* military or 24 hour time */
+
+#define ISL12022_SR_LBAT85	(1 << 2)
+#define ISL12022_SR_LBAT75	(1 << 1)
+
+#define ISL12022_INT_WRTC	(1 << 6)
+
+
+static struct i2c_driver isl12022_driver;
+
+struct isl12022 {
+	struct rtc_device *rtc;
+
+	bool write_enabled;	/* true if write enable is set */
+};
+
+
+static int isl12022_read_regs(struct i2c_client *client, uint8_t reg,
+			      uint8_t *data, size_t n)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= data
+		},		/* setup read ptr */
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= n,
+			.buf	= data
+		}
+	};
+
+	int ret;
+
+	data[0] = reg;
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs)) {
+		dev_err(&client->dev, "%s: read error, ret=%d\n",
+			__func__, ret);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+static int isl12022_write_reg(struct i2c_client *client,
+			      uint8_t reg, uint8_t val)
+{
+	uint8_t data[2] = { reg, val };
+	int err;
+
+	err = i2c_master_send(client, data, sizeof(data));
+	if (err != sizeof(data)) {
+		dev_err(&client->dev,
+			"%s: err=%d addr=%02x, data=%02x\n",
+			__func__, err, data[0], data[1]);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+/*
+ * In the routines that deal directly with the isl12022 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int isl12022_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	uint8_t buf[ISL12022_REG_INT + 1];
+	int ret;
+
+	ret = isl12022_read_regs(client, ISL12022_REG_SC, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	if (buf[ISL12022_REG_SR] & (ISL12022_SR_LBAT85 | ISL12022_SR_LBAT75)) {
+		dev_warn(&client->dev,
+			 "voltage dropped below %u%%, "
+			 "date and time is not reliable.\n",
+			 buf[ISL12022_REG_SR] & ISL12022_SR_LBAT85 ? 85 : 75);
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, mon=%02x, year=%02x, wday=%02x, "
+		"sr=%02x, int=%02x",
+		__func__,
+		buf[ISL12022_REG_SC],
+		buf[ISL12022_REG_MN],
+		buf[ISL12022_REG_HR],
+		buf[ISL12022_REG_DT],
+		buf[ISL12022_REG_MO],
+		buf[ISL12022_REG_YR],
+		buf[ISL12022_REG_DW],
+		buf[ISL12022_REG_SR],
+		buf[ISL12022_REG_INT]);
+
+	tm->tm_sec = bcd2bin(buf[ISL12022_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[ISL12022_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ISL12022_REG_HR] & 0x3F);
+	tm->tm_mday = bcd2bin(buf[ISL12022_REG_DT] & 0x3F);
+	tm->tm_wday = buf[ISL12022_REG_DW] & 0x07;
+	tm->tm_mon = bcd2bin(buf[ISL12022_REG_MO] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[ISL12022_REG_YR]) + 100;
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int isl12022_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct isl12022 *isl12022 = i2c_get_clientdata(client);
+	size_t i;
+	int ret;
+	uint8_t buf[ISL12022_REG_DW + 1];
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	if (!isl12022->write_enabled) {
+
+		ret = isl12022_read_regs(client, ISL12022_REG_INT, buf, 1);
+		if (ret)
+			return ret;
+
+		/* Check if WRTC (write rtc enable) is set factory default is
+		 * 0 (not set) */
+		if (!(buf[0] & ISL12022_INT_WRTC)) {
+			dev_info(&client->dev,
+				 "init write enable and 24 hour format\n");
+
+			/* Set the write enable bit. */
+			ret = isl12022_write_reg(client,
+						 ISL12022_REG_INT,
+						 buf[0] | ISL12022_INT_WRTC);
+			if (ret)
+				return ret;
+
+			/* Write to any RTC register to start RTC, we use the
+			 * HR register, setting the MIL bit to use the 24 hour
+			 * format. */
+			ret = isl12022_read_regs(client, ISL12022_REG_HR,
+						 buf, 1);
+			if (ret)
+				return ret;
+
+			ret = isl12022_write_reg(client,
+						 ISL12022_REG_HR,
+						 buf[0] | ISL12022_HR_MIL);
+			if (ret)
+				return ret;
+		}
+
+		isl12022->write_enabled = 1;
+	}
+
+	/* hours, minutes and seconds */
+	buf[ISL12022_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[ISL12022_REG_MN] = bin2bcd(tm->tm_min);
+	buf[ISL12022_REG_HR] = bin2bcd(tm->tm_hour) | ISL12022_HR_MIL;
+
+	buf[ISL12022_REG_DT] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[ISL12022_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	buf[ISL12022_REG_YR] = bin2bcd(tm->tm_year % 100);
+
+	buf[ISL12022_REG_DW] = tm->tm_wday & 0x07;
+
+	/* write register's data */
+	for (i = 0; i < ARRAY_SIZE(buf); i++) {
+		ret = isl12022_write_reg(client, ISL12022_REG_SC + i,
+					 buf[ISL12022_REG_SC + i]);
+		if (ret)
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl12022_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl12022_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops isl12022_rtc_ops = {
+	.read_time	= isl12022_rtc_read_time,
+	.set_time	= isl12022_rtc_set_time,
+};
+
+static int isl12022_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct isl12022 *isl12022;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	isl12022 = devm_kzalloc(&client->dev, sizeof(struct isl12022),
+				GFP_KERNEL);
+	if (!isl12022)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, isl12022);
+
+	isl12022->rtc = devm_rtc_device_register(&client->dev,
+					isl12022_driver.driver.name,
+					&isl12022_rtc_ops, THIS_MODULE);
+	return PTR_ERR_OR_ZERO(isl12022->rtc);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id isl12022_dt_match[] = {
+	{ .compatible = "isl,isl12022" }, /* for backward compat., don't use */
+	{ .compatible = "isil,isl12022" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isl12022_dt_match);
+#endif
+
+static const struct i2c_device_id isl12022_id[] = {
+	{ "isl12022", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl12022_id);
+
+static struct i2c_driver isl12022_driver = {
+	.driver		= {
+		.name	= "rtc-isl12022",
+#ifdef CONFIG_OF
+		.of_match_table = of_match_ptr(isl12022_dt_match),
+#endif
+	},
+	.probe		= isl12022_probe,
+	.id_table	= isl12022_id,
+};
+
+module_i2c_driver(isl12022_driver);
+
+MODULE_AUTHOR("roman.fietze@telemotive.de");
+MODULE_DESCRIPTION("ISL 12022 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-isl1208.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-isl1208.c
new file mode 100644
index 0000000..8dd299c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-isl1208.c
@@ -0,0 +1,711 @@
+/*
+ * Intersil ISL1208 rtc class driver
+ *
+ * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+/* Register map */
+/* rtc section */
+#define ISL1208_REG_SC  0x00
+#define ISL1208_REG_MN  0x01
+#define ISL1208_REG_HR  0x02
+#define ISL1208_REG_HR_MIL     (1<<7)	/* 24h/12h mode */
+#define ISL1208_REG_HR_PM      (1<<5)	/* PM/AM bit in 12h mode */
+#define ISL1208_REG_DT  0x03
+#define ISL1208_REG_MO  0x04
+#define ISL1208_REG_YR  0x05
+#define ISL1208_REG_DW  0x06
+#define ISL1208_RTC_SECTION_LEN 7
+
+/* control/status section */
+#define ISL1208_REG_SR  0x07
+#define ISL1208_REG_SR_ARST    (1<<7)	/* auto reset */
+#define ISL1208_REG_SR_XTOSCB  (1<<6)	/* crystal oscillator */
+#define ISL1208_REG_SR_WRTC    (1<<4)	/* write rtc */
+#define ISL1208_REG_SR_ALM     (1<<2)	/* alarm */
+#define ISL1208_REG_SR_BAT     (1<<1)	/* battery */
+#define ISL1208_REG_SR_RTCF    (1<<0)	/* rtc fail */
+#define ISL1208_REG_INT 0x08
+#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
+#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
+#define ISL1208_REG_09  0x09	/* reserved */
+#define ISL1208_REG_ATR 0x0a
+#define ISL1208_REG_DTR 0x0b
+
+/* alarm section */
+#define ISL1208_REG_SCA 0x0c
+#define ISL1208_REG_MNA 0x0d
+#define ISL1208_REG_HRA 0x0e
+#define ISL1208_REG_DTA 0x0f
+#define ISL1208_REG_MOA 0x10
+#define ISL1208_REG_DWA 0x11
+#define ISL1208_ALARM_SECTION_LEN 6
+
+/* user section */
+#define ISL1208_REG_USR1 0x12
+#define ISL1208_REG_USR2 0x13
+#define ISL1208_USR_SECTION_LEN 2
+
+static struct i2c_driver isl1208_driver;
+
+/* block read */
+static int
+isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+		      unsigned len)
+{
+	u8 reg_addr[1] = { reg };
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.len = sizeof(reg_addr),
+			.buf = reg_addr
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = buf
+		}
+	};
+	int ret;
+
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* block write */
+static int
+isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+		     unsigned len)
+{
+	u8 i2c_buf[ISL1208_REG_USR2 + 2];
+	struct i2c_msg msgs[1] = {
+		{
+			.addr = client->addr,
+			.len = len + 1,
+			.buf = i2c_buf
+		}
+	};
+	int ret;
+
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	i2c_buf[0] = reg;
+	memcpy(&i2c_buf[1], &buf[0], len);
+
+	ret = i2c_transfer(client->adapter, msgs, 1);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* simple check to see whether we have a isl1208 */
+static int
+isl1208_i2c_validate_client(struct i2c_client *client)
+{
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
+	};
+	int i;
+	int ret;
+
+	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+		if (regs[i] & zero_mask[i])	/* check if bits are cleared */
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int
+isl1208_i2c_get_sr(struct i2c_client *client)
+{
+	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
+}
+
+static int
+isl1208_i2c_get_atr(struct i2c_client *client)
+{
+	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+	if (atr < 0)
+		return atr;
+
+	/* The 6bit value in the ATR register controls the load
+	 * capacitance C_load * in steps of 0.25pF
+	 *
+	 * bit (1<<5) of the ATR register is inverted
+	 *
+	 * C_load(ATR=0x20) =  4.50pF
+	 * C_load(ATR=0x00) = 12.50pF
+	 * C_load(ATR=0x1f) = 20.25pF
+	 *
+	 */
+
+	atr &= 0x3f;		/* mask out lsb */
+	atr ^= 1 << 5;		/* invert 6th bit */
+	atr += 2 * 9;		/* add offset of 4.5pF; unit[atr] = 0.25pF */
+
+	return atr;
+}
+
+static int
+isl1208_i2c_get_dtr(struct i2c_client *client)
+{
+	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+	if (dtr < 0)
+		return -EIO;
+
+	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+	dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
+
+	return dtr;
+}
+
+static int
+isl1208_i2c_get_usr(struct i2c_client *client)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+	int ret;
+
+	ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
+				    ISL1208_USR_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	return (buf[1] << 8) | buf[0];
+}
+
+static int
+isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN];
+
+	buf[0] = usr & 0xff;
+	buf[1] = (usr >> 8) & 0xff;
+
+	return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
+				    ISL1208_USR_SECTION_LEN);
+}
+
+static int
+isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
+{
+	int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
+
+	if (icr < 0) {
+		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
+		return icr;
+	}
+
+	if (enable)
+		icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
+	else
+		icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
+
+	icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
+	if (icr < 0) {
+		dev_err(&client->dev, "%s: writing INT failed\n", __func__);
+		return icr;
+	}
+
+	return 0;
+}
+
+static int
+isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct i2c_client *const client = to_i2c_client(dev);
+	int sr, dtr, atr, usr;
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
+		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
+		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
+
+	seq_printf(seq, "batt_status\t: %s\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+
+	dtr = isl1208_i2c_get_dtr(client);
+	if (dtr >= 0 - 1)
+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+
+	atr = isl1208_i2c_get_atr(client);
+	if (atr >= 0)
+		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+			   atr >> 2, (atr & 0x3) * 25);
+
+	usr = isl1208_i2c_get_usr(client);
+	if (usr >= 0)
+		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
+
+	return 0;
+}
+
+static int
+isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
+	tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
+
+	/* HR field has a more complex interpretation */
+	{
+		const u8 _hr = regs[ISL1208_REG_HR];
+		if (_hr & ISL1208_REG_HR_MIL)	/* 24h format */
+			tm->tm_hour = bcd2bin(_hr & 0x3f);
+		else {
+			/* 12h format */
+			tm->tm_hour = bcd2bin(_hr & 0x1f);
+			if (_hr & ISL1208_REG_HR_PM)	/* PM flag set */
+				tm->tm_hour += 12;
+		}
+	}
+
+	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
+	tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1;	/* rtc starts at 1 */
+	tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
+	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
+
+	return 0;
+}
+
+static int
+isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *const tm = &alarm->time;
+	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+	int icr, yr, sr = isl1208_i2c_get_sr(client);
+
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+				   ISL1208_ALARM_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading alarm section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* MSB of each alarm register is an enable bit */
+	tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
+	tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
+	tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mon =
+		bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
+	tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
+
+	/* The alarm doesn't store the year so get it from the rtc section */
+	yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
+	if (yr < 0) {
+		dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
+		return yr;
+	}
+	tm->tm_year = bcd2bin(yr) + 100;
+
+	icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
+	if (icr < 0) {
+		dev_err(&client->dev, "%s: reading INT failed\n", __func__);
+		return icr;
+	}
+	alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
+
+	return 0;
+}
+
+static int
+isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *alarm_tm = &alarm->time;
+	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+	const int offs = ISL1208_REG_SCA;
+	struct rtc_time rtc_tm;
+	int err, enable;
+
+	err = isl1208_i2c_read_time(client, &rtc_tm);
+	if (err)
+		return err;
+
+	/* If the alarm time is before the current time disable the alarm */
+	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
+		enable = 0x00;
+	else
+		enable = 0x80;
+
+	/* Program the alarm and enable it for each setting */
+	regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
+	regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
+	regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
+		ISL1208_REG_HR_MIL | enable;
+
+	regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
+	regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
+	regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
+
+	/* write ALARM registers */
+	err = isl1208_i2c_set_regs(client, offs, regs,
+				  ISL1208_ALARM_SECTION_LEN);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: writing ALARM section failed\n",
+			__func__);
+		return err;
+	}
+
+	err = isl1208_rtc_toggle_alarm(client, enable);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int
+isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+}
+
+static int
+isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	/* The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	 */
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
+	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
+	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
+
+	regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
+	regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
+	regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
+
+	regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	/* set WRTC */
+	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+				       sr | ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	/* write RTC registers */
+	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* clear WRTC again */
+	sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+				       sr & ~ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	return 0;
+}
+
+
+static int
+isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+}
+
+static int
+isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+}
+
+static int
+isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
+}
+
+static irqreturn_t
+isl1208_rtc_interrupt(int irq, void *data)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	struct i2c_client *client = data;
+	struct rtc_device *rtc = i2c_get_clientdata(client);
+	int handled = 0, sr, err;
+
+	/*
+	 * I2C reads get NAK'ed if we read straight away after an interrupt?
+	 * Using a mdelay/msleep didn't seem to help either, so we work around
+	 * this by continually trying to read the register for a short time.
+	 */
+	while (1) {
+		sr = isl1208_i2c_get_sr(client);
+		if (sr >= 0)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(&client->dev, "%s: reading SR failed\n",
+				__func__);
+			return sr;
+		}
+	}
+
+	if (sr & ISL1208_REG_SR_ALM) {
+		dev_dbg(&client->dev, "alarm!\n");
+
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+		/* Clear the alarm */
+		sr &= ~ISL1208_REG_SR_ALM;
+		sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
+		if (sr < 0)
+			dev_err(&client->dev, "%s: writing SR failed\n",
+				__func__);
+		else
+			handled = 1;
+
+		/* Disable the alarm */
+		err = isl1208_rtc_toggle_alarm(client, 0);
+		if (err)
+			return err;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static const struct rtc_class_ops isl1208_rtc_ops = {
+	.proc = isl1208_rtc_proc,
+	.read_time = isl1208_rtc_read_time,
+	.set_time = isl1208_rtc_set_time,
+	.read_alarm = isl1208_rtc_read_alarm,
+	.set_alarm = isl1208_rtc_set_alarm,
+};
+
+/* sysfs interface */
+
+static ssize_t
+isl1208_sysfs_show_atrim(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+	if (atr < 0)
+		return atr;
+
+	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
+}
+
+static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+
+static ssize_t
+isl1208_sysfs_show_dtrim(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+	if (dtr < 0)
+		return dtr;
+
+	return sprintf(buf, "%d ppm\n", dtr);
+}
+
+static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+
+static ssize_t
+isl1208_sysfs_show_usr(struct device *dev,
+		       struct device_attribute *attr, char *buf)
+{
+	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+	if (usr < 0)
+		return usr;
+
+	return sprintf(buf, "0x%.4x\n", usr);
+}
+
+static ssize_t
+isl1208_sysfs_store_usr(struct device *dev,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	int usr = -1;
+
+	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
+		if (sscanf(buf, "%x", &usr) != 1)
+			return -EINVAL;
+	} else {
+		if (sscanf(buf, "%d", &usr) != 1)
+			return -EINVAL;
+	}
+
+	if (usr < 0 || usr > 0xffff)
+		return -EINVAL;
+
+	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+}
+
+static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+		   isl1208_sysfs_store_usr);
+
+static struct attribute *isl1208_rtc_attrs[] = {
+	&dev_attr_atrim.attr,
+	&dev_attr_dtrim.attr,
+	&dev_attr_usr.attr,
+	NULL
+};
+
+static const struct attribute_group isl1208_rtc_sysfs_files = {
+	.attrs	= isl1208_rtc_attrs,
+};
+
+static int
+isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int rc = 0;
+	struct rtc_device *rtc;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	if (isl1208_i2c_validate_client(client) < 0)
+		return -ENODEV;
+
+	if (client->irq > 0) {
+		rc = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					       isl1208_rtc_interrupt,
+					       IRQF_SHARED | IRQF_ONESHOT,
+					       isl1208_driver.driver.name,
+					       client);
+		if (!rc) {
+			device_init_wakeup(&client->dev, 1);
+			enable_irq_wake(client->irq);
+		} else {
+			dev_err(&client->dev,
+				"Unable to request irq %d, no alarm support\n",
+				client->irq);
+			client->irq = 0;
+		}
+	}
+
+	rtc = devm_rtc_device_register(&client->dev, isl1208_driver.driver.name,
+				  &isl1208_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	rc = isl1208_i2c_get_sr(client);
+	if (rc < 0) {
+		dev_err(&client->dev, "reading status failed\n");
+		return rc;
+	}
+
+	if (rc & ISL1208_REG_SR_RTCF)
+		dev_warn(&client->dev, "rtc power failure detected, "
+			 "please set clock.\n");
+
+	rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int
+isl1208_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
+
+	return 0;
+}
+
+static const struct i2c_device_id isl1208_id[] = {
+	{ "isl1208", 0 },
+	{ "isl1218", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl1208_id);
+
+static const struct of_device_id isl1208_of_match[] = {
+	{ .compatible = "isil,isl1208" },
+	{ .compatible = "isil,isl1218" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, isl1208_of_match);
+
+static struct i2c_driver isl1208_driver = {
+	.driver = {
+		.name = "rtc-isl1208",
+		.of_match_table = of_match_ptr(isl1208_of_match),
+	},
+	.probe = isl1208_probe,
+	.remove = isl1208_remove,
+	.id_table = isl1208_id,
+};
+
+module_i2c_driver(isl1208_driver);
+
+MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
+MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-jz4740.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-jz4740.c
new file mode 100644
index 0000000..64989af
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-jz4740.c
@@ -0,0 +1,451 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Copyright (C) 2010, Paul Cercueil <paul@crapouillou.net>
+ *	 JZ4740 SoC RTC driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of  the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define JZ_REG_RTC_CTRL		0x00
+#define JZ_REG_RTC_SEC		0x04
+#define JZ_REG_RTC_SEC_ALARM	0x08
+#define JZ_REG_RTC_REGULATOR	0x0C
+#define JZ_REG_RTC_HIBERNATE	0x20
+#define JZ_REG_RTC_WAKEUP_FILTER	0x24
+#define JZ_REG_RTC_RESET_COUNTER	0x28
+#define JZ_REG_RTC_SCRATCHPAD	0x34
+
+/* The following are present on the jz4780 */
+#define JZ_REG_RTC_WENR	0x3C
+#define JZ_RTC_WENR_WEN	BIT(31)
+
+#define JZ_RTC_CTRL_WRDY	BIT(7)
+#define JZ_RTC_CTRL_1HZ		BIT(6)
+#define JZ_RTC_CTRL_1HZ_IRQ	BIT(5)
+#define JZ_RTC_CTRL_AF		BIT(4)
+#define JZ_RTC_CTRL_AF_IRQ	BIT(3)
+#define JZ_RTC_CTRL_AE		BIT(2)
+#define JZ_RTC_CTRL_ENABLE	BIT(0)
+
+/* Magic value to enable writes on jz4780 */
+#define JZ_RTC_WENR_MAGIC	0xA55A
+
+#define JZ_RTC_WAKEUP_FILTER_MASK	0x0000FFE0
+#define JZ_RTC_RESET_COUNTER_MASK	0x00000FE0
+
+enum jz4740_rtc_type {
+	ID_JZ4740,
+	ID_JZ4780,
+};
+
+struct jz4740_rtc {
+	void __iomem *base;
+	enum jz4740_rtc_type type;
+
+	struct rtc_device *rtc;
+	struct clk *clk;
+
+	int irq;
+
+	spinlock_t lock;
+
+	unsigned int min_wakeup_pin_assert_time;
+	unsigned int reset_pin_assert_time;
+};
+
+static struct device *dev_for_power_off;
+
+static inline uint32_t jz4740_rtc_reg_read(struct jz4740_rtc *rtc, size_t reg)
+{
+	return readl(rtc->base + reg);
+}
+
+static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc)
+{
+	uint32_t ctrl;
+	int timeout = 1000;
+
+	do {
+		ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+	} while (!(ctrl & JZ_RTC_CTRL_WRDY) && --timeout);
+
+	return timeout ? 0 : -EIO;
+}
+
+static inline int jz4780_rtc_enable_write(struct jz4740_rtc *rtc)
+{
+	uint32_t ctrl;
+	int ret, timeout = 1000;
+
+	ret = jz4740_rtc_wait_write_ready(rtc);
+	if (ret != 0)
+		return ret;
+
+	writel(JZ_RTC_WENR_MAGIC, rtc->base + JZ_REG_RTC_WENR);
+
+	do {
+		ctrl = readl(rtc->base + JZ_REG_RTC_WENR);
+	} while (!(ctrl & JZ_RTC_WENR_WEN) && --timeout);
+
+	return timeout ? 0 : -EIO;
+}
+
+static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
+	uint32_t val)
+{
+	int ret = 0;
+
+	if (rtc->type >= ID_JZ4780)
+		ret = jz4780_rtc_enable_write(rtc);
+	if (ret == 0)
+		ret = jz4740_rtc_wait_write_ready(rtc);
+	if (ret == 0)
+		writel(val, rtc->base + reg);
+
+	return ret;
+}
+
+static int jz4740_rtc_ctrl_set_bits(struct jz4740_rtc *rtc, uint32_t mask,
+	bool set)
+{
+	int ret;
+	unsigned long flags;
+	uint32_t ctrl;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	/* Don't clear interrupt flags by accident */
+	ctrl |= JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF;
+
+	if (set)
+		ctrl |= mask;
+	else
+		ctrl &= ~mask;
+
+	ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_CTRL, ctrl);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return ret;
+}
+
+static int jz4740_rtc_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	uint32_t secs, secs2;
+	int timeout = 5;
+
+	/* If the seconds register is read while it is updated, it can contain a
+	 * bogus value. This can be avoided by making sure that two consecutive
+	 * reads have the same value.
+	 */
+	secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+	secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+
+	while (secs != secs2 && --timeout) {
+		secs = secs2;
+		secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+	}
+
+	if (timeout == 0)
+		return -EIO;
+
+	rtc_time_to_tm(secs, time);
+
+	return rtc_valid_tm(time);
+}
+
+static int jz4740_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+
+	return jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, secs);
+}
+
+static int jz4740_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	uint32_t secs;
+	uint32_t ctrl;
+
+	secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC_ALARM);
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	alrm->enabled = !!(ctrl & JZ_RTC_CTRL_AE);
+	alrm->pending = !!(ctrl & JZ_RTC_CTRL_AF);
+
+	rtc_time_to_tm(secs, &alrm->time);
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int jz4740_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long secs;
+
+	rtc_tm_to_time(&alrm->time, &secs);
+
+	ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC_ALARM, secs);
+	if (!ret)
+		ret = jz4740_rtc_ctrl_set_bits(rtc,
+			JZ_RTC_CTRL_AE | JZ_RTC_CTRL_AF_IRQ, alrm->enabled);
+
+	return ret;
+}
+
+static int jz4740_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	return jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_AF_IRQ, enable);
+}
+
+static const struct rtc_class_ops jz4740_rtc_ops = {
+	.read_time	= jz4740_rtc_read_time,
+	.set_mmss	= jz4740_rtc_set_mmss,
+	.read_alarm	= jz4740_rtc_read_alarm,
+	.set_alarm	= jz4740_rtc_set_alarm,
+	.alarm_irq_enable = jz4740_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t jz4740_rtc_irq(int irq, void *data)
+{
+	struct jz4740_rtc *rtc = data;
+	uint32_t ctrl;
+	unsigned long events = 0;
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	if (ctrl & JZ_RTC_CTRL_1HZ)
+		events |= (RTC_UF | RTC_IRQF);
+
+	if (ctrl & JZ_RTC_CTRL_AF)
+		events |= (RTC_AF | RTC_IRQF);
+
+	rtc_update_irq(rtc->rtc, 1, events);
+
+	jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF, false);
+
+	return IRQ_HANDLED;
+}
+
+static void jz4740_rtc_poweroff(struct device *dev)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	jz4740_rtc_reg_write(rtc, JZ_REG_RTC_HIBERNATE, 1);
+}
+
+static void jz4740_rtc_power_off(void)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev_for_power_off);
+	unsigned long rtc_rate;
+	unsigned long wakeup_filter_ticks;
+	unsigned long reset_counter_ticks;
+
+	clk_prepare_enable(rtc->clk);
+
+	rtc_rate = clk_get_rate(rtc->clk);
+
+	/*
+	 * Set minimum wakeup pin assertion time: 100 ms.
+	 * Range is 0 to 2 sec if RTC is clocked at 32 kHz.
+	 */
+	wakeup_filter_ticks =
+		(rtc->min_wakeup_pin_assert_time * rtc_rate) / 1000;
+	if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
+		wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
+	else
+		wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
+	jz4740_rtc_reg_write(rtc,
+			     JZ_REG_RTC_WAKEUP_FILTER, wakeup_filter_ticks);
+
+	/*
+	 * Set reset pin low-level assertion time after wakeup: 60 ms.
+	 * Range is 0 to 125 ms if RTC is clocked at 32 kHz.
+	 */
+	reset_counter_ticks = (rtc->reset_pin_assert_time * rtc_rate) / 1000;
+	if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
+		reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
+	else
+		reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
+	jz4740_rtc_reg_write(rtc,
+			     JZ_REG_RTC_RESET_COUNTER, reset_counter_ticks);
+
+	jz4740_rtc_poweroff(dev_for_power_off);
+	kernel_halt();
+}
+
+static const struct of_device_id jz4740_rtc_of_match[] = {
+	{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4740_rtc_of_match);
+
+static int jz4740_rtc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_rtc *rtc;
+	uint32_t scratchpad;
+	struct resource *mem;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct of_device_id *of_id = of_match_device(
+			jz4740_rtc_of_match, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	if (of_id)
+		rtc->type = (enum jz4740_rtc_type)of_id->data;
+	else
+		rtc->type = id->driver_data;
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get platform irq\n");
+		return -ENOENT;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(rtc->base))
+		return PTR_ERR(rtc->base);
+
+	rtc->clk = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(rtc->clk)) {
+		dev_err(&pdev->dev, "Failed to get RTC clock\n");
+		return PTR_ERR(rtc->clk);
+	}
+
+	spin_lock_init(&rtc->lock);
+
+	platform_set_drvdata(pdev, rtc);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&jz4740_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		dev_err(&pdev->dev, "Failed to register rtc device: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_irq(&pdev->dev, rtc->irq, jz4740_rtc_irq, 0,
+				pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request rtc irq: %d\n", ret);
+		return ret;
+	}
+
+	scratchpad = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SCRATCHPAD);
+	if (scratchpad != 0x12345678) {
+		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SCRATCHPAD, 0x12345678);
+		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, 0);
+		if (ret) {
+			dev_err(&pdev->dev, "Could not write write to RTC registers\n");
+			return ret;
+		}
+	}
+
+	if (np && of_device_is_system_power_controller(np)) {
+		if (!pm_power_off) {
+			/* Default: 60ms */
+			rtc->reset_pin_assert_time = 60;
+			of_property_read_u32(np, "reset-pin-assert-time-ms",
+					     &rtc->reset_pin_assert_time);
+
+			/* Default: 100ms */
+			rtc->min_wakeup_pin_assert_time = 100;
+			of_property_read_u32(np,
+					     "min-wakeup-pin-assert-time-ms",
+					     &rtc->min_wakeup_pin_assert_time);
+
+			dev_for_power_off = &pdev->dev;
+			pm_power_off = jz4740_rtc_power_off;
+		} else {
+			dev_warn(&pdev->dev,
+				 "Poweroff handler already present!\n");
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int jz4740_rtc_suspend(struct device *dev)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq);
+	return 0;
+}
+
+static int jz4740_rtc_resume(struct device *dev)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq);
+	return 0;
+}
+
+static const struct dev_pm_ops jz4740_pm_ops = {
+	.suspend = jz4740_rtc_suspend,
+	.resume  = jz4740_rtc_resume,
+};
+#define JZ4740_RTC_PM_OPS (&jz4740_pm_ops)
+
+#else
+#define JZ4740_RTC_PM_OPS NULL
+#endif  /* CONFIG_PM */
+
+static const struct platform_device_id jz4740_rtc_ids[] = {
+	{ "jz4740-rtc", ID_JZ4740 },
+	{ "jz4780-rtc", ID_JZ4780 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, jz4740_rtc_ids);
+
+static struct platform_driver jz4740_rtc_driver = {
+	.probe	 = jz4740_rtc_probe,
+	.driver	 = {
+		.name  = "jz4740-rtc",
+		.pm    = JZ4740_RTC_PM_OPS,
+		.of_match_table = of_match_ptr(jz4740_rtc_of_match),
+	},
+	.id_table = jz4740_rtc_ids,
+};
+
+module_platform_driver(jz4740_rtc_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RTC driver for the JZ4740 SoC\n");
+MODULE_ALIAS("platform:jz4740-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-lib.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-lib.c
new file mode 100644
index 0000000..ad5bb21
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-lib.c
@@ -0,0 +1,148 @@
+/*
+ * rtc and date/time utility functions
+ *
+ * Copyright (C) 2005-06 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on arch/arm/common/rtctime.c and other bits
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/export.h>
+#include <linux/rtc.h>
+
+static const unsigned char rtc_days_in_month[] = {
+	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+};
+
+static const unsigned short rtc_ydays[2][13] = {
+	/* Normal years */
+	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+	/* Leap years */
+	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+};
+
+#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
+
+/*
+ * The number of days in the month.
+ */
+int rtc_month_days(unsigned int month, unsigned int year)
+{
+	return rtc_days_in_month[month] + (is_leap_year(year) && month == 1);
+}
+EXPORT_SYMBOL(rtc_month_days);
+
+/*
+ * The number of days since January 1. (0 to 365)
+ */
+int rtc_year_days(unsigned int day, unsigned int month, unsigned int year)
+{
+	return rtc_ydays[is_leap_year(year)][month] + day-1;
+}
+EXPORT_SYMBOL(rtc_year_days);
+
+
+/*
+ * rtc_time_to_tm64 - Converts time64_t to rtc_time.
+ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
+ */
+void rtc_time64_to_tm(time64_t time, struct rtc_time *tm)
+{
+	unsigned int month, year, secs;
+	int days;
+
+	/* time must be positive */
+	days = div_s64_rem(time, 86400, &secs);
+
+	/* day of the week, 1970-01-01 was a Thursday */
+	tm->tm_wday = (days + 4) % 7;
+
+	year = 1970 + days / 365;
+	days -= (year - 1970) * 365
+		+ LEAPS_THRU_END_OF(year - 1)
+		- LEAPS_THRU_END_OF(1970 - 1);
+	if (days < 0) {
+		year -= 1;
+		days += 365 + is_leap_year(year);
+	}
+	tm->tm_year = year - 1900;
+	tm->tm_yday = days + 1;
+
+	for (month = 0; month < 11; month++) {
+		int newdays;
+
+		newdays = days - rtc_month_days(month, year);
+		if (newdays < 0)
+			break;
+		days = newdays;
+	}
+	tm->tm_mon = month;
+	tm->tm_mday = days + 1;
+
+	tm->tm_hour = secs / 3600;
+	secs -= tm->tm_hour * 3600;
+	tm->tm_min = secs / 60;
+	tm->tm_sec = secs - tm->tm_min * 60;
+
+	tm->tm_isdst = 0;
+}
+EXPORT_SYMBOL(rtc_time64_to_tm);
+
+/*
+ * Does the rtc_time represent a valid date/time?
+ */
+int rtc_valid_tm(struct rtc_time *tm)
+{
+	if (tm->tm_year < 70
+		|| ((unsigned)tm->tm_mon) >= 12
+		|| tm->tm_mday < 1
+		|| tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900)
+		|| ((unsigned)tm->tm_hour) >= 24
+		|| ((unsigned)tm->tm_min) >= 60
+		|| ((unsigned)tm->tm_sec) >= 60)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(rtc_valid_tm);
+
+/*
+ * rtc_tm_to_time64 - Converts rtc_time to time64_t.
+ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
+ */
+time64_t rtc_tm_to_time64(struct rtc_time *tm)
+{
+	return mktime64(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+			tm->tm_hour, tm->tm_min, tm->tm_sec);
+}
+EXPORT_SYMBOL(rtc_tm_to_time64);
+
+/*
+ * Convert rtc_time to ktime
+ */
+ktime_t rtc_tm_to_ktime(struct rtc_time tm)
+{
+	return ktime_set(rtc_tm_to_time64(&tm), 0);
+}
+EXPORT_SYMBOL_GPL(rtc_tm_to_ktime);
+
+/*
+ * Convert ktime to rtc_time
+ */
+struct rtc_time rtc_ktime_to_tm(ktime_t kt)
+{
+	struct timespec64 ts;
+	struct rtc_time ret;
+
+	ts = ktime_to_timespec64(kt);
+	/* Round up any ns */
+	if (ts.tv_nsec)
+		ts.tv_sec++;
+	rtc_time64_to_tm(ts.tv_sec, &ret);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtc_ktime_to_tm);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-lp8788.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-lp8788.c
new file mode 100644
index 0000000..e20e7bd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-lp8788.c
@@ -0,0 +1,326 @@
+/*
+ * TI LP8788 MFD - rtc driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+/* register address */
+#define LP8788_INTEN_3			0x05
+#define LP8788_RTC_UNLOCK		0x64
+#define LP8788_RTC_SEC			0x70
+#define LP8788_ALM1_SEC			0x77
+#define LP8788_ALM1_EN			0x7D
+#define LP8788_ALM2_SEC			0x7E
+#define LP8788_ALM2_EN			0x84
+
+/* mask/shift bits */
+#define LP8788_INT_RTC_ALM1_M		BIT(1)	/* Addr 05h */
+#define LP8788_INT_RTC_ALM1_S		1
+#define LP8788_INT_RTC_ALM2_M		BIT(2)	/* Addr 05h */
+#define LP8788_INT_RTC_ALM2_S		2
+#define LP8788_ALM_EN_M			BIT(7)	/* Addr 7Dh or 84h */
+#define LP8788_ALM_EN_S			7
+
+#define DEFAULT_ALARM_SEL		LP8788_ALARM_1
+#define LP8788_MONTH_OFFSET		1
+#define LP8788_BASE_YEAR		2000
+#define MAX_WDAY_BITS			7
+#define LP8788_WDAY_SET			1
+#define RTC_UNLOCK			0x1
+#define RTC_LATCH			0x2
+#define ALARM_IRQ_FLAG			(RTC_IRQF | RTC_AF)
+
+enum lp8788_time {
+	LPTIME_SEC,
+	LPTIME_MIN,
+	LPTIME_HOUR,
+	LPTIME_MDAY,
+	LPTIME_MON,
+	LPTIME_YEAR,
+	LPTIME_WDAY,
+	LPTIME_MAX,
+};
+
+struct lp8788_rtc {
+	struct lp8788 *lp;
+	struct rtc_device *rdev;
+	enum lp8788_alarm_sel alarm;
+	int irq;
+};
+
+static const u8 addr_alarm_sec[LP8788_ALARM_MAX] = {
+	LP8788_ALM1_SEC,
+	LP8788_ALM2_SEC,
+};
+
+static const u8 addr_alarm_en[LP8788_ALARM_MAX] = {
+	LP8788_ALM1_EN,
+	LP8788_ALM2_EN,
+};
+
+static const u8 mask_alarm_en[LP8788_ALARM_MAX] = {
+	LP8788_INT_RTC_ALM1_M,
+	LP8788_INT_RTC_ALM2_M,
+};
+
+static const u8 shift_alarm_en[LP8788_ALARM_MAX] = {
+	LP8788_INT_RTC_ALM1_S,
+	LP8788_INT_RTC_ALM2_S,
+};
+
+static int _to_tm_wday(u8 lp8788_wday)
+{
+	int i;
+
+	if (lp8788_wday == 0)
+		return 0;
+
+	/* lookup defined weekday from read register value */
+	for (i = 0; i < MAX_WDAY_BITS; i++) {
+		if ((lp8788_wday >> i) == LP8788_WDAY_SET)
+			break;
+	}
+
+	return i + 1;
+}
+
+static inline int _to_lp8788_wday(int tm_wday)
+{
+	return LP8788_WDAY_SET << (tm_wday - 1);
+}
+
+static void lp8788_rtc_unlock(struct lp8788 *lp)
+{
+	lp8788_write_byte(lp, LP8788_RTC_UNLOCK, RTC_UNLOCK);
+	lp8788_write_byte(lp, LP8788_RTC_UNLOCK, RTC_LATCH);
+}
+
+static int lp8788_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lp8788_rtc *rtc = dev_get_drvdata(dev);
+	struct lp8788 *lp = rtc->lp;
+	u8 data[LPTIME_MAX];
+	int ret;
+
+	lp8788_rtc_unlock(lp);
+
+	ret = lp8788_read_multi_bytes(lp, LP8788_RTC_SEC, data,	LPTIME_MAX);
+	if (ret)
+		return ret;
+
+	tm->tm_sec  = data[LPTIME_SEC];
+	tm->tm_min  = data[LPTIME_MIN];
+	tm->tm_hour = data[LPTIME_HOUR];
+	tm->tm_mday = data[LPTIME_MDAY];
+	tm->tm_mon  = data[LPTIME_MON] - LP8788_MONTH_OFFSET;
+	tm->tm_year = data[LPTIME_YEAR] + LP8788_BASE_YEAR - 1900;
+	tm->tm_wday = _to_tm_wday(data[LPTIME_WDAY]);
+
+	return 0;
+}
+
+static int lp8788_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lp8788_rtc *rtc = dev_get_drvdata(dev);
+	struct lp8788 *lp = rtc->lp;
+	u8 data[LPTIME_MAX - 1];
+	int ret, i, year;
+
+	year = tm->tm_year + 1900 - LP8788_BASE_YEAR;
+	if (year < 0) {
+		dev_err(lp->dev, "invalid year: %d\n", year);
+		return -EINVAL;
+	}
+
+	/* because rtc weekday is a readonly register, do not update */
+	data[LPTIME_SEC]  = tm->tm_sec;
+	data[LPTIME_MIN]  = tm->tm_min;
+	data[LPTIME_HOUR] = tm->tm_hour;
+	data[LPTIME_MDAY] = tm->tm_mday;
+	data[LPTIME_MON]  = tm->tm_mon + LP8788_MONTH_OFFSET;
+	data[LPTIME_YEAR] = year;
+
+	for (i = 0; i < ARRAY_SIZE(data); i++) {
+		ret = lp8788_write_byte(lp, LP8788_RTC_SEC + i, data[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int lp8788_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct lp8788_rtc *rtc = dev_get_drvdata(dev);
+	struct lp8788 *lp = rtc->lp;
+	struct rtc_time *tm = &alarm->time;
+	u8 addr, data[LPTIME_MAX];
+	int ret;
+
+	addr = addr_alarm_sec[rtc->alarm];
+	ret = lp8788_read_multi_bytes(lp, addr, data, LPTIME_MAX);
+	if (ret)
+		return ret;
+
+	tm->tm_sec  = data[LPTIME_SEC];
+	tm->tm_min  = data[LPTIME_MIN];
+	tm->tm_hour = data[LPTIME_HOUR];
+	tm->tm_mday = data[LPTIME_MDAY];
+	tm->tm_mon  = data[LPTIME_MON] - LP8788_MONTH_OFFSET;
+	tm->tm_year = data[LPTIME_YEAR] + LP8788_BASE_YEAR - 1900;
+	tm->tm_wday = _to_tm_wday(data[LPTIME_WDAY]);
+	alarm->enabled = data[LPTIME_WDAY] & LP8788_ALM_EN_M;
+
+	return 0;
+}
+
+static int lp8788_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct lp8788_rtc *rtc = dev_get_drvdata(dev);
+	struct lp8788 *lp = rtc->lp;
+	struct rtc_time *tm = &alarm->time;
+	u8 addr, data[LPTIME_MAX];
+	int ret, i, year;
+
+	year = tm->tm_year + 1900 - LP8788_BASE_YEAR;
+	if (year < 0) {
+		dev_err(lp->dev, "invalid year: %d\n", year);
+		return -EINVAL;
+	}
+
+	data[LPTIME_SEC]  = tm->tm_sec;
+	data[LPTIME_MIN]  = tm->tm_min;
+	data[LPTIME_HOUR] = tm->tm_hour;
+	data[LPTIME_MDAY] = tm->tm_mday;
+	data[LPTIME_MON]  = tm->tm_mon + LP8788_MONTH_OFFSET;
+	data[LPTIME_YEAR] = year;
+	data[LPTIME_WDAY] = _to_lp8788_wday(tm->tm_wday);
+
+	for (i = 0; i < ARRAY_SIZE(data); i++) {
+		addr = addr_alarm_sec[rtc->alarm] + i;
+		ret = lp8788_write_byte(lp, addr, data[i]);
+		if (ret)
+			return ret;
+	}
+
+	alarm->enabled = 1;
+	addr = addr_alarm_en[rtc->alarm];
+
+	return lp8788_update_bits(lp, addr, LP8788_ALM_EN_M,
+				alarm->enabled << LP8788_ALM_EN_S);
+}
+
+static int lp8788_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct lp8788_rtc *rtc = dev_get_drvdata(dev);
+	struct lp8788 *lp = rtc->lp;
+	u8 mask, shift;
+
+	if (!rtc->irq)
+		return -EIO;
+
+	mask = mask_alarm_en[rtc->alarm];
+	shift = shift_alarm_en[rtc->alarm];
+
+	return lp8788_update_bits(lp, LP8788_INTEN_3, mask, enable << shift);
+}
+
+static const struct rtc_class_ops lp8788_rtc_ops = {
+	.read_time = lp8788_rtc_read_time,
+	.set_time = lp8788_rtc_set_time,
+	.read_alarm = lp8788_read_alarm,
+	.set_alarm = lp8788_set_alarm,
+	.alarm_irq_enable = lp8788_alarm_irq_enable,
+};
+
+static irqreturn_t lp8788_alarm_irq_handler(int irq, void *ptr)
+{
+	struct lp8788_rtc *rtc = ptr;
+
+	rtc_update_irq(rtc->rdev, 1, ALARM_IRQ_FLAG);
+	return IRQ_HANDLED;
+}
+
+static int lp8788_alarm_irq_register(struct platform_device *pdev,
+				struct lp8788_rtc *rtc)
+{
+	struct resource *r;
+	struct lp8788 *lp = rtc->lp;
+	struct irq_domain *irqdm = lp->irqdm;
+	int irq;
+
+	rtc->irq = 0;
+
+	/* even the alarm IRQ number is not specified, rtc time should work */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, LP8788_ALM_IRQ);
+	if (!r)
+		return 0;
+
+	if (rtc->alarm == LP8788_ALARM_1)
+		irq = r->start;
+	else
+		irq = r->end;
+
+	rtc->irq = irq_create_mapping(irqdm, irq);
+
+	return devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+				lp8788_alarm_irq_handler,
+				0, LP8788_ALM_IRQ, rtc);
+}
+
+static int lp8788_rtc_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	struct lp8788_rtc *rtc;
+	struct device *dev = &pdev->dev;
+
+	rtc = devm_kzalloc(dev, sizeof(struct lp8788_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->lp = lp;
+	rtc->alarm = lp->pdata ? lp->pdata->alarm_sel : DEFAULT_ALARM_SEL;
+	platform_set_drvdata(pdev, rtc);
+
+	device_init_wakeup(dev, 1);
+
+	rtc->rdev = devm_rtc_device_register(dev, "lp8788_rtc",
+					&lp8788_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rdev)) {
+		dev_err(dev, "can not register rtc device\n");
+		return PTR_ERR(rtc->rdev);
+	}
+
+	if (lp8788_alarm_irq_register(pdev, rtc))
+		dev_warn(lp->dev, "no rtc irq handler\n");
+
+	return 0;
+}
+
+static struct platform_driver lp8788_rtc_driver = {
+	.probe = lp8788_rtc_probe,
+	.driver = {
+		.name = LP8788_DEV_RTC,
+	},
+};
+module_platform_driver(lp8788_rtc_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8788 RTC Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc24xx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc24xx.c
new file mode 100644
index 0000000..59d9959
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc24xx.c
@@ -0,0 +1,310 @@
+/*
+ * RTC driver for NXP LPC178x/18xx/43xx Real-Time Clock (RTC)
+ *
+ * Copyright (C) 2011 NXP Semiconductors
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* LPC24xx RTC register offsets and bits */
+#define LPC24XX_ILR		0x00
+#define  LPC24XX_RTCCIF		BIT(0)
+#define  LPC24XX_RTCALF		BIT(1)
+#define LPC24XX_CTC		0x04
+#define LPC24XX_CCR		0x08
+#define  LPC24XX_CLKEN		BIT(0)
+#define  LPC178X_CCALEN		BIT(4)
+#define LPC24XX_CIIR		0x0c
+#define LPC24XX_AMR		0x10
+#define  LPC24XX_ALARM_DISABLE	0xff
+#define LPC24XX_CTIME0		0x14
+#define LPC24XX_CTIME1		0x18
+#define LPC24XX_CTIME2		0x1c
+#define LPC24XX_SEC		0x20
+#define LPC24XX_MIN		0x24
+#define LPC24XX_HOUR		0x28
+#define LPC24XX_DOM		0x2c
+#define LPC24XX_DOW		0x30
+#define LPC24XX_DOY		0x34
+#define LPC24XX_MONTH		0x38
+#define LPC24XX_YEAR		0x3c
+#define LPC24XX_ALSEC		0x60
+#define LPC24XX_ALMIN		0x64
+#define LPC24XX_ALHOUR		0x68
+#define LPC24XX_ALDOM		0x6c
+#define LPC24XX_ALDOW		0x70
+#define LPC24XX_ALDOY		0x74
+#define LPC24XX_ALMON		0x78
+#define LPC24XX_ALYEAR		0x7c
+
+/* Macros to read fields in consolidated time (CT) registers */
+#define CT0_SECS(x)		(((x) >> 0)  & 0x3f)
+#define CT0_MINS(x)		(((x) >> 8)  & 0x3f)
+#define CT0_HOURS(x)		(((x) >> 16) & 0x1f)
+#define CT0_DOW(x)		(((x) >> 24) & 0x07)
+#define CT1_DOM(x)		(((x) >> 0)  & 0x1f)
+#define CT1_MONTH(x)		(((x) >> 8)  & 0x0f)
+#define CT1_YEAR(x)		(((x) >> 16) & 0xfff)
+#define CT2_DOY(x)		(((x) >> 0)  & 0xfff)
+
+#define rtc_readl(dev, reg)		readl((dev)->rtc_base + (reg))
+#define rtc_writel(dev, reg, val)	writel((val), (dev)->rtc_base + (reg))
+
+struct lpc24xx_rtc {
+	void __iomem *rtc_base;
+	struct rtc_device *rtc;
+	struct clk *clk_rtc;
+	struct clk *clk_reg;
+};
+
+static int lpc24xx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+
+	/* Disable RTC during update */
+	rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
+
+	rtc_writel(rtc, LPC24XX_SEC,	tm->tm_sec);
+	rtc_writel(rtc, LPC24XX_MIN,	tm->tm_min);
+	rtc_writel(rtc, LPC24XX_HOUR,	tm->tm_hour);
+	rtc_writel(rtc, LPC24XX_DOW,	tm->tm_wday);
+	rtc_writel(rtc, LPC24XX_DOM,	tm->tm_mday);
+	rtc_writel(rtc, LPC24XX_DOY,	tm->tm_yday);
+	rtc_writel(rtc, LPC24XX_MONTH,	tm->tm_mon);
+	rtc_writel(rtc, LPC24XX_YEAR,	tm->tm_year);
+
+	rtc_writel(rtc, LPC24XX_CCR, LPC24XX_CLKEN | LPC178X_CCALEN);
+
+	return 0;
+}
+
+static int lpc24xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	u32 ct0, ct1, ct2;
+
+	ct0 = rtc_readl(rtc, LPC24XX_CTIME0);
+	ct1 = rtc_readl(rtc, LPC24XX_CTIME1);
+	ct2 = rtc_readl(rtc, LPC24XX_CTIME2);
+
+	tm->tm_sec  = CT0_SECS(ct0);
+	tm->tm_min  = CT0_MINS(ct0);
+	tm->tm_hour = CT0_HOURS(ct0);
+	tm->tm_wday = CT0_DOW(ct0);
+	tm->tm_mon  = CT1_MONTH(ct1);
+	tm->tm_mday = CT1_DOM(ct1);
+	tm->tm_year = CT1_YEAR(ct1);
+	tm->tm_yday = CT2_DOY(ct2);
+
+	return rtc_valid_tm(tm);
+}
+
+static int lpc24xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &wkalrm->time;
+
+	tm->tm_sec  = rtc_readl(rtc, LPC24XX_ALSEC);
+	tm->tm_min  = rtc_readl(rtc, LPC24XX_ALMIN);
+	tm->tm_hour = rtc_readl(rtc, LPC24XX_ALHOUR);
+	tm->tm_mday = rtc_readl(rtc, LPC24XX_ALDOM);
+	tm->tm_wday = rtc_readl(rtc, LPC24XX_ALDOW);
+	tm->tm_yday = rtc_readl(rtc, LPC24XX_ALDOY);
+	tm->tm_mon  = rtc_readl(rtc, LPC24XX_ALMON);
+	tm->tm_year = rtc_readl(rtc, LPC24XX_ALYEAR);
+
+	wkalrm->enabled = rtc_readl(rtc, LPC24XX_AMR) == 0;
+	wkalrm->pending = !!(rtc_readl(rtc, LPC24XX_ILR) & LPC24XX_RTCCIF);
+
+	return rtc_valid_tm(&wkalrm->time);
+}
+
+static int lpc24xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &wkalrm->time;
+
+	/* Disable alarm irq during update */
+	rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+
+	rtc_writel(rtc, LPC24XX_ALSEC,  tm->tm_sec);
+	rtc_writel(rtc, LPC24XX_ALMIN,  tm->tm_min);
+	rtc_writel(rtc, LPC24XX_ALHOUR, tm->tm_hour);
+	rtc_writel(rtc, LPC24XX_ALDOM,  tm->tm_mday);
+	rtc_writel(rtc, LPC24XX_ALDOW,  tm->tm_wday);
+	rtc_writel(rtc, LPC24XX_ALDOY,  tm->tm_yday);
+	rtc_writel(rtc, LPC24XX_ALMON,  tm->tm_mon);
+	rtc_writel(rtc, LPC24XX_ALYEAR, tm->tm_year);
+
+	if (wkalrm->enabled)
+		rtc_writel(rtc, LPC24XX_AMR, 0);
+
+	return 0;
+}
+
+static int lpc24xx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enable)
+		rtc_writel(rtc, LPC24XX_AMR, 0);
+	else
+		rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+
+	return 0;
+}
+
+static irqreturn_t lpc24xx_rtc_interrupt(int irq, void *data)
+{
+	unsigned long events = RTC_IRQF;
+	struct lpc24xx_rtc *rtc = data;
+	u32 rtc_iir;
+
+	/* Check interrupt cause */
+	rtc_iir = rtc_readl(rtc, LPC24XX_ILR);
+	if (rtc_iir & LPC24XX_RTCALF) {
+		events |= RTC_AF;
+		rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+	}
+
+	/* Clear interrupt status and report event */
+	rtc_writel(rtc, LPC24XX_ILR, rtc_iir);
+	rtc_update_irq(rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops lpc24xx_rtc_ops = {
+	.read_time		= lpc24xx_rtc_read_time,
+	.set_time		= lpc24xx_rtc_set_time,
+	.read_alarm		= lpc24xx_rtc_read_alarm,
+	.set_alarm		= lpc24xx_rtc_set_alarm,
+	.alarm_irq_enable	= lpc24xx_rtc_alarm_irq_enable,
+};
+
+static int lpc24xx_rtc_probe(struct platform_device *pdev)
+{
+	struct lpc24xx_rtc *rtc;
+	struct resource *res;
+	int irq, ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->rtc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->rtc_base))
+		return PTR_ERR(rtc->rtc_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_warn(&pdev->dev, "can't get interrupt resource\n");
+		return irq;
+	}
+
+	rtc->clk_rtc = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(rtc->clk_rtc)) {
+		dev_err(&pdev->dev, "error getting rtc clock\n");
+		return PTR_ERR(rtc->clk_rtc);
+	}
+
+	rtc->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	if (IS_ERR(rtc->clk_reg)) {
+		dev_err(&pdev->dev, "error getting reg clock\n");
+		return PTR_ERR(rtc->clk_reg);
+	}
+
+	ret = clk_prepare_enable(rtc->clk_rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable rtc clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(rtc->clk_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable reg clock\n");
+		goto disable_rtc_clk;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	/* Clear any pending interrupts */
+	rtc_writel(rtc, LPC24XX_ILR, LPC24XX_RTCCIF | LPC24XX_RTCALF);
+
+	/* Enable RTC count */
+	rtc_writel(rtc, LPC24XX_CCR, LPC24XX_CLKEN | LPC178X_CCALEN);
+
+	ret = devm_request_irq(&pdev->dev, irq, lpc24xx_rtc_interrupt, 0,
+			       pdev->name, rtc);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "can't request interrupt\n");
+		goto disable_clks;
+	}
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, "lpc24xx-rtc",
+					    &lpc24xx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		dev_err(&pdev->dev, "can't register rtc device\n");
+		ret = PTR_ERR(rtc->rtc);
+		goto disable_clks;
+	}
+
+	return 0;
+
+disable_clks:
+	clk_disable_unprepare(rtc->clk_reg);
+disable_rtc_clk:
+	clk_disable_unprepare(rtc->clk_rtc);
+	return ret;
+}
+
+static int lpc24xx_rtc_remove(struct platform_device *pdev)
+{
+	struct lpc24xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	/* Ensure all interrupt sources are masked */
+	rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+	rtc_writel(rtc, LPC24XX_CIIR, 0);
+
+	rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
+
+	clk_disable_unprepare(rtc->clk_rtc);
+	clk_disable_unprepare(rtc->clk_reg);
+
+	return 0;
+}
+
+static const struct of_device_id lpc24xx_rtc_match[] = {
+	{ .compatible = "nxp,lpc1788-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc24xx_rtc_match);
+
+static struct platform_driver lpc24xx_rtc_driver = {
+	.probe	= lpc24xx_rtc_probe,
+	.remove	= lpc24xx_rtc_remove,
+	.driver	= {
+		.name = "lpc24xx-rtc",
+		.of_match_table	= lpc24xx_rtc_match,
+	},
+};
+module_platform_driver(lpc24xx_rtc_driver);
+
+MODULE_AUTHOR("Kevin Wells <wellsk40@gmail.com>");
+MODULE_DESCRIPTION("RTC driver for the LPC178x/18xx/408x/43xx SoCs");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc32xx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc32xx.c
new file mode 100644
index 0000000..887871c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-lpc32xx.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+/*
+ * Clock and Power control register offsets
+ */
+#define LPC32XX_RTC_UCOUNT		0x00
+#define LPC32XX_RTC_DCOUNT		0x04
+#define LPC32XX_RTC_MATCH0		0x08
+#define LPC32XX_RTC_MATCH1		0x0C
+#define LPC32XX_RTC_CTRL		0x10
+#define LPC32XX_RTC_INTSTAT		0x14
+#define LPC32XX_RTC_KEY			0x18
+#define LPC32XX_RTC_SRAM		0x80
+
+#define LPC32XX_RTC_CTRL_MATCH0		(1 << 0)
+#define LPC32XX_RTC_CTRL_MATCH1		(1 << 1)
+#define LPC32XX_RTC_CTRL_ONSW_MATCH0	(1 << 2)
+#define LPC32XX_RTC_CTRL_ONSW_MATCH1	(1 << 3)
+#define LPC32XX_RTC_CTRL_SW_RESET	(1 << 4)
+#define LPC32XX_RTC_CTRL_CNTR_DIS	(1 << 6)
+#define LPC32XX_RTC_CTRL_ONSW_FORCE_HI	(1 << 7)
+
+#define LPC32XX_RTC_INTSTAT_MATCH0	(1 << 0)
+#define LPC32XX_RTC_INTSTAT_MATCH1	(1 << 1)
+#define LPC32XX_RTC_INTSTAT_ONSW	(1 << 2)
+
+#define LPC32XX_RTC_KEY_ONSW_LOADVAL	0xB5C13F27
+
+#define RTC_NAME "rtc-lpc32xx"
+
+#define rtc_readl(dev, reg) \
+	__raw_readl((dev)->rtc_base + (reg))
+#define rtc_writel(dev, reg, val) \
+	__raw_writel((val), (dev)->rtc_base + (reg))
+
+struct lpc32xx_rtc {
+	void __iomem *rtc_base;
+	int irq;
+	unsigned char alarm_enabled;
+	struct rtc_device *rtc;
+	spinlock_t lock;
+};
+
+static int lpc32xx_rtc_read_time(struct device *dev, struct rtc_time *time)
+{
+	unsigned long elapsed_sec;
+	struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
+
+	elapsed_sec = rtc_readl(rtc, LPC32XX_RTC_UCOUNT);
+	rtc_time_to_tm(elapsed_sec, time);
+
+	return rtc_valid_tm(time);
+}
+
+static int lpc32xx_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
+	u32 tmp;
+
+	spin_lock_irq(&rtc->lock);
+
+	/* RTC must be disabled during count update */
+	tmp = rtc_readl(rtc, LPC32XX_RTC_CTRL);
+	rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp | LPC32XX_RTC_CTRL_CNTR_DIS);
+	rtc_writel(rtc, LPC32XX_RTC_UCOUNT, secs);
+	rtc_writel(rtc, LPC32XX_RTC_DCOUNT, 0xFFFFFFFF - secs);
+	rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp &= ~LPC32XX_RTC_CTRL_CNTR_DIS);
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static int lpc32xx_rtc_read_alarm(struct device *dev,
+	struct rtc_wkalrm *wkalrm)
+{
+	struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(rtc_readl(rtc, LPC32XX_RTC_MATCH0), &wkalrm->time);
+	wkalrm->enabled = rtc->alarm_enabled;
+	wkalrm->pending = !!(rtc_readl(rtc, LPC32XX_RTC_INTSTAT) &
+		LPC32XX_RTC_INTSTAT_MATCH0);
+
+	return rtc_valid_tm(&wkalrm->time);
+}
+
+static int lpc32xx_rtc_set_alarm(struct device *dev,
+	struct rtc_wkalrm *wkalrm)
+{
+	struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long alarmsecs;
+	u32 tmp;
+	int ret;
+
+	ret = rtc_tm_to_time(&wkalrm->time, &alarmsecs);
+	if (ret < 0) {
+		dev_warn(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	spin_lock_irq(&rtc->lock);
+
+	/* Disable alarm during update */
+	tmp = rtc_readl(rtc, LPC32XX_RTC_CTRL);
+	rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp & ~LPC32XX_RTC_CTRL_MATCH0);
+
+	rtc_writel(rtc, LPC32XX_RTC_MATCH0, alarmsecs);
+
+	rtc->alarm_enabled = wkalrm->enabled;
+	if (wkalrm->enabled) {
+		rtc_writel(rtc, LPC32XX_RTC_INTSTAT,
+			   LPC32XX_RTC_INTSTAT_MATCH0);
+		rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp |
+			   LPC32XX_RTC_CTRL_MATCH0);
+	}
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static int lpc32xx_rtc_alarm_irq_enable(struct device *dev,
+	unsigned int enabled)
+{
+	struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
+	u32 tmp;
+
+	spin_lock_irq(&rtc->lock);
+	tmp = rtc_readl(rtc, LPC32XX_RTC_CTRL);
+
+	if (enabled) {
+		rtc->alarm_enabled = 1;
+		tmp |= LPC32XX_RTC_CTRL_MATCH0;
+	} else {
+		rtc->alarm_enabled = 0;
+		tmp &= ~LPC32XX_RTC_CTRL_MATCH0;
+	}
+
+	rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp);
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static irqreturn_t lpc32xx_rtc_alarm_interrupt(int irq, void *dev)
+{
+	struct lpc32xx_rtc *rtc = dev;
+
+	spin_lock(&rtc->lock);
+
+	/* Disable alarm interrupt */
+	rtc_writel(rtc, LPC32XX_RTC_CTRL,
+		rtc_readl(rtc, LPC32XX_RTC_CTRL) &
+			  ~LPC32XX_RTC_CTRL_MATCH0);
+	rtc->alarm_enabled = 0;
+
+	/*
+	 * Write a large value to the match value so the RTC won't
+	 * keep firing the match status
+	 */
+	rtc_writel(rtc, LPC32XX_RTC_MATCH0, 0xFFFFFFFF);
+	rtc_writel(rtc, LPC32XX_RTC_INTSTAT, LPC32XX_RTC_INTSTAT_MATCH0);
+
+	spin_unlock(&rtc->lock);
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops lpc32xx_rtc_ops = {
+	.read_time		= lpc32xx_rtc_read_time,
+	.set_mmss		= lpc32xx_rtc_set_mmss,
+	.read_alarm		= lpc32xx_rtc_read_alarm,
+	.set_alarm		= lpc32xx_rtc_set_alarm,
+	.alarm_irq_enable	= lpc32xx_rtc_alarm_irq_enable,
+};
+
+static int lpc32xx_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct lpc32xx_rtc *rtc;
+	int rtcirq;
+	u32 tmp;
+
+	rtcirq = platform_get_irq(pdev, 0);
+	if (rtcirq < 0) {
+		dev_warn(&pdev->dev, "Can't get interrupt resource\n");
+		rtcirq = -1;
+	}
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (unlikely(!rtc))
+		return -ENOMEM;
+
+	rtc->irq = rtcirq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->rtc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->rtc_base))
+		return PTR_ERR(rtc->rtc_base);
+
+	spin_lock_init(&rtc->lock);
+
+	/*
+	 * The RTC is on a separate power domain and can keep it's state
+	 * across a chip power cycle. If the RTC has never been previously
+	 * setup, then set it up now for the first time.
+	 */
+	tmp = rtc_readl(rtc, LPC32XX_RTC_CTRL);
+	if (rtc_readl(rtc, LPC32XX_RTC_KEY) != LPC32XX_RTC_KEY_ONSW_LOADVAL) {
+		tmp &= ~(LPC32XX_RTC_CTRL_SW_RESET |
+			LPC32XX_RTC_CTRL_CNTR_DIS |
+			LPC32XX_RTC_CTRL_MATCH0 |
+			LPC32XX_RTC_CTRL_MATCH1 |
+			LPC32XX_RTC_CTRL_ONSW_MATCH0 |
+			LPC32XX_RTC_CTRL_ONSW_MATCH1 |
+			LPC32XX_RTC_CTRL_ONSW_FORCE_HI);
+		rtc_writel(rtc, LPC32XX_RTC_CTRL, tmp);
+
+		/* Clear latched interrupt states */
+		rtc_writel(rtc, LPC32XX_RTC_MATCH0, 0xFFFFFFFF);
+		rtc_writel(rtc, LPC32XX_RTC_INTSTAT,
+			   LPC32XX_RTC_INTSTAT_MATCH0 |
+			   LPC32XX_RTC_INTSTAT_MATCH1 |
+			   LPC32XX_RTC_INTSTAT_ONSW);
+
+		/* Write key value to RTC so it won't reload on reset */
+		rtc_writel(rtc, LPC32XX_RTC_KEY,
+			   LPC32XX_RTC_KEY_ONSW_LOADVAL);
+	} else {
+		rtc_writel(rtc, LPC32XX_RTC_CTRL,
+			   tmp & ~LPC32XX_RTC_CTRL_MATCH0);
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, RTC_NAME,
+					&lpc32xx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		dev_err(&pdev->dev, "Can't get RTC\n");
+		return PTR_ERR(rtc->rtc);
+	}
+
+	/*
+	 * IRQ is enabled after device registration in case alarm IRQ
+	 * is pending upon suspend exit.
+	 */
+	if (rtc->irq >= 0) {
+		if (devm_request_irq(&pdev->dev, rtc->irq,
+				     lpc32xx_rtc_alarm_interrupt,
+				     0, pdev->name, rtc) < 0) {
+			dev_warn(&pdev->dev, "Can't request interrupt.\n");
+			rtc->irq = -1;
+		} else {
+			device_init_wakeup(&pdev->dev, 1);
+		}
+	}
+
+	return 0;
+}
+
+static int lpc32xx_rtc_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (rtc->irq >= 0)
+		device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (rtc->irq >= 0) {
+		if (device_may_wakeup(&pdev->dev))
+			enable_irq_wake(rtc->irq);
+		else
+			disable_irq_wake(rtc->irq);
+	}
+
+	return 0;
+}
+
+static int lpc32xx_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (rtc->irq >= 0 && device_may_wakeup(&pdev->dev))
+		disable_irq_wake(rtc->irq);
+
+	return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int lpc32xx_rtc_freeze(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	spin_lock_irq(&rtc->lock);
+
+	rtc_writel(rtc, LPC32XX_RTC_CTRL,
+		rtc_readl(rtc, LPC32XX_RTC_CTRL) &
+			  ~LPC32XX_RTC_CTRL_MATCH0);
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static int lpc32xx_rtc_thaw(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (rtc->alarm_enabled) {
+		spin_lock_irq(&rtc->lock);
+
+		rtc_writel(rtc, LPC32XX_RTC_CTRL,
+			   rtc_readl(rtc, LPC32XX_RTC_CTRL) |
+			   LPC32XX_RTC_CTRL_MATCH0);
+
+		spin_unlock_irq(&rtc->lock);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops lpc32xx_rtc_pm_ops = {
+	.suspend = lpc32xx_rtc_suspend,
+	.resume = lpc32xx_rtc_resume,
+	.freeze = lpc32xx_rtc_freeze,
+	.thaw = lpc32xx_rtc_thaw,
+	.restore = lpc32xx_rtc_resume
+};
+
+#define LPC32XX_RTC_PM_OPS (&lpc32xx_rtc_pm_ops)
+#else
+#define LPC32XX_RTC_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_rtc_match[] = {
+	{ .compatible = "nxp,lpc3220-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_rtc_match);
+#endif
+
+static struct platform_driver lpc32xx_rtc_driver = {
+	.probe		= lpc32xx_rtc_probe,
+	.remove		= lpc32xx_rtc_remove,
+	.driver = {
+		.name	= RTC_NAME,
+		.pm	= LPC32XX_RTC_PM_OPS,
+		.of_match_table = of_match_ptr(lpc32xx_rtc_match),
+	},
+};
+
+module_platform_driver(lpc32xx_rtc_driver);
+
+MODULE_AUTHOR("Kevin Wells <wellsk40@gmail.com");
+MODULE_DESCRIPTION("RTC driver for the LPC32xx SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-lpc32xx");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ls1x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ls1x.c
new file mode 100644
index 0000000..e04ca54
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ls1x.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2011 Zhao Zhang <zhzhl555@gmail.com>
+ *
+ * Derived from driver/rtc/rtc-au1xxx.c
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <loongson1.h>
+
+#define LS1X_RTC_REG_OFFSET	(LS1X_RTC_BASE + 0x20)
+#define LS1X_RTC_REGS(x) \
+		((void __iomem *)KSEG1ADDR(LS1X_RTC_REG_OFFSET + (x)))
+
+/*RTC programmable counters 0 and 1*/
+#define SYS_COUNTER_CNTRL		(LS1X_RTC_REGS(0x20))
+#define SYS_CNTRL_ERS			(1 << 23)
+#define SYS_CNTRL_RTS			(1 << 20)
+#define SYS_CNTRL_RM2			(1 << 19)
+#define SYS_CNTRL_RM1			(1 << 18)
+#define SYS_CNTRL_RM0			(1 << 17)
+#define SYS_CNTRL_RS			(1 << 16)
+#define SYS_CNTRL_BP			(1 << 14)
+#define SYS_CNTRL_REN			(1 << 13)
+#define SYS_CNTRL_BRT			(1 << 12)
+#define SYS_CNTRL_TEN			(1 << 11)
+#define SYS_CNTRL_BTT			(1 << 10)
+#define SYS_CNTRL_E0			(1 << 8)
+#define SYS_CNTRL_ETS			(1 << 7)
+#define SYS_CNTRL_32S			(1 << 5)
+#define SYS_CNTRL_TTS			(1 << 4)
+#define SYS_CNTRL_TM2			(1 << 3)
+#define SYS_CNTRL_TM1			(1 << 2)
+#define SYS_CNTRL_TM0			(1 << 1)
+#define SYS_CNTRL_TS			(1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM		(LS1X_RTC_REGS(0))
+#define SYS_TOYWRITE0		(LS1X_RTC_REGS(4))
+#define SYS_TOYWRITE1		(LS1X_RTC_REGS(8))
+#define SYS_TOYREAD0		(LS1X_RTC_REGS(0xC))
+#define SYS_TOYREAD1		(LS1X_RTC_REGS(0x10))
+#define SYS_TOYMATCH0		(LS1X_RTC_REGS(0x14))
+#define SYS_TOYMATCH1		(LS1X_RTC_REGS(0x18))
+#define SYS_TOYMATCH2		(LS1X_RTC_REGS(0x1C))
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM		(LS1X_RTC_REGS(0x40))
+#define SYS_RTCWRITE0		(LS1X_RTC_REGS(0x44))
+#define SYS_RTCREAD0		(LS1X_RTC_REGS(0x48))
+#define SYS_RTCMATCH0		(LS1X_RTC_REGS(0x4C))
+#define SYS_RTCMATCH1		(LS1X_RTC_REGS(0x50))
+#define SYS_RTCMATCH2		(LS1X_RTC_REGS(0x54))
+
+#define LS1X_SEC_OFFSET		(4)
+#define LS1X_MIN_OFFSET		(10)
+#define LS1X_HOUR_OFFSET	(16)
+#define LS1X_DAY_OFFSET		(21)
+#define LS1X_MONTH_OFFSET	(26)
+
+
+#define LS1X_SEC_MASK		(0x3f)
+#define LS1X_MIN_MASK		(0x3f)
+#define LS1X_HOUR_MASK		(0x1f)
+#define LS1X_DAY_MASK		(0x1f)
+#define LS1X_MONTH_MASK		(0x3f)
+#define LS1X_YEAR_MASK		(0xffffffff)
+
+#define ls1x_get_sec(t)		(((t) >> LS1X_SEC_OFFSET) & LS1X_SEC_MASK)
+#define ls1x_get_min(t)		(((t) >> LS1X_MIN_OFFSET) & LS1X_MIN_MASK)
+#define ls1x_get_hour(t)	(((t) >> LS1X_HOUR_OFFSET) & LS1X_HOUR_MASK)
+#define ls1x_get_day(t)		(((t) >> LS1X_DAY_OFFSET) & LS1X_DAY_MASK)
+#define ls1x_get_month(t)	(((t) >> LS1X_MONTH_OFFSET) & LS1X_MONTH_MASK)
+
+#define RTC_CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
+
+static int ls1x_rtc_read_time(struct device *dev, struct rtc_time *rtm)
+{
+	unsigned long v, t;
+
+	v = readl(SYS_TOYREAD0);
+	t = readl(SYS_TOYREAD1);
+
+	memset(rtm, 0, sizeof(struct rtc_time));
+	t  = mktime((t & LS1X_YEAR_MASK), ls1x_get_month(v),
+			ls1x_get_day(v), ls1x_get_hour(v),
+			ls1x_get_min(v), ls1x_get_sec(v));
+	rtc_time_to_tm(t, rtm);
+
+	return rtc_valid_tm(rtm);
+}
+
+static int ls1x_rtc_set_time(struct device *dev, struct  rtc_time *rtm)
+{
+	unsigned long v, t, c;
+	int ret = -ETIMEDOUT;
+
+	v = ((rtm->tm_mon + 1)  << LS1X_MONTH_OFFSET)
+		| (rtm->tm_mday << LS1X_DAY_OFFSET)
+		| (rtm->tm_hour << LS1X_HOUR_OFFSET)
+		| (rtm->tm_min  << LS1X_MIN_OFFSET)
+		| (rtm->tm_sec  << LS1X_SEC_OFFSET);
+
+	writel(v, SYS_TOYWRITE0);
+	c = 0x10000;
+	/* add timeout check counter, for more safe */
+	while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TS) && --c)
+		usleep_range(1000, 3000);
+
+	if (!c) {
+		dev_err(dev, "set time timeout!\n");
+		goto err;
+	}
+
+	t = rtm->tm_year + 1900;
+	writel(t, SYS_TOYWRITE1);
+	c = 0x10000;
+	while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TS) && --c)
+		usleep_range(1000, 3000);
+
+	if (!c) {
+		dev_err(dev, "set time timeout!\n");
+		goto err;
+	}
+	return 0;
+err:
+	return ret;
+}
+
+static const struct rtc_class_ops  ls1x_rtc_ops = {
+	.read_time	= ls1x_rtc_read_time,
+	.set_time	= ls1x_rtc_set_time,
+};
+
+static int ls1x_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtcdev;
+	unsigned long v;
+	int ret;
+
+	v = readl(SYS_COUNTER_CNTRL);
+	if (!(v & RTC_CNTR_OK)) {
+		dev_err(&pdev->dev, "rtc counters not working\n");
+		ret = -ENODEV;
+		goto err;
+	}
+	ret = -ETIMEDOUT;
+	/* set to 1 HZ if needed */
+	if (readl(SYS_TOYTRIM) != 32767) {
+		v = 0x100000;
+		while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TTS) && --v)
+			usleep_range(1000, 3000);
+
+		if (!v) {
+			dev_err(&pdev->dev, "time out\n");
+			goto err;
+		}
+		writel(32767, SYS_TOYTRIM);
+	}
+	/* this loop coundn't be endless */
+	while (readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TTS)
+		usleep_range(1000, 3000);
+
+	rtcdev = devm_rtc_device_register(&pdev->dev, "ls1x-rtc",
+					&ls1x_rtc_ops , THIS_MODULE);
+	if (IS_ERR(rtcdev)) {
+		ret = PTR_ERR(rtcdev);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, rtcdev);
+	return 0;
+err:
+	return ret;
+}
+
+static struct platform_driver  ls1x_rtc_driver = {
+	.driver		= {
+		.name	= "ls1x-rtc",
+	},
+	.probe		= ls1x_rtc_probe,
+};
+
+module_platform_driver(ls1x_rtc_driver);
+
+MODULE_AUTHOR("zhao zhang <zhzhl555@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t80.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t80.c
new file mode 100644
index 0000000..407aa1e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t80.c
@@ -0,0 +1,1032 @@
+/*
+ * I2C client/driver for the ST M41T80 family of i2c rtc chips.
+ *
+ * Author: Alexander Bigga <ab@mycable.de>
+ *
+ * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2006 (c) mycable GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bcd.h>
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#ifdef CONFIG_RTC_DRV_M41T80_WDT
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/miscdevice.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+#endif
+
+#define M41T80_REG_SSEC		0x00
+#define M41T80_REG_SEC		0x01
+#define M41T80_REG_MIN		0x02
+#define M41T80_REG_HOUR		0x03
+#define M41T80_REG_WDAY		0x04
+#define M41T80_REG_DAY		0x05
+#define M41T80_REG_MON		0x06
+#define M41T80_REG_YEAR		0x07
+#define M41T80_REG_ALARM_MON	0x0a
+#define M41T80_REG_ALARM_DAY	0x0b
+#define M41T80_REG_ALARM_HOUR	0x0c
+#define M41T80_REG_ALARM_MIN	0x0d
+#define M41T80_REG_ALARM_SEC	0x0e
+#define M41T80_REG_FLAGS	0x0f
+#define M41T80_REG_SQW		0x13
+
+#define M41T80_DATETIME_REG_SIZE	(M41T80_REG_YEAR + 1)
+#define M41T80_ALARM_REG_SIZE	\
+	(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
+
+#define M41T80_SQW_MAX_FREQ	32768
+
+#define M41T80_SEC_ST		BIT(7)	/* ST: Stop Bit */
+#define M41T80_ALMON_AFE	BIT(7)	/* AFE: AF Enable Bit */
+#define M41T80_ALMON_SQWE	BIT(6)	/* SQWE: SQW Enable Bit */
+#define M41T80_ALHOUR_HT	BIT(6)	/* HT: Halt Update Bit */
+#define M41T80_FLAGS_OF		BIT(2)	/* OF: Oscillator Failure Bit */
+#define M41T80_FLAGS_AF		BIT(6)	/* AF: Alarm Flag Bit */
+#define M41T80_FLAGS_BATT_LOW	BIT(4)	/* BL: Battery Low Bit */
+#define M41T80_WATCHDOG_RB2	BIT(7)	/* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB1	BIT(1)	/* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB0	BIT(0)	/* RB: Watchdog resolution */
+
+#define M41T80_FEATURE_HT	BIT(0)	/* Halt feature */
+#define M41T80_FEATURE_BL	BIT(1)	/* Battery low indicator */
+#define M41T80_FEATURE_SQ	BIT(2)	/* Squarewave feature */
+#define M41T80_FEATURE_WD	BIT(3)	/* Extra watchdog resolution */
+#define M41T80_FEATURE_SQ_ALT	BIT(4)	/* RSx bits are in reg 4 */
+
+static DEFINE_MUTEX(m41t80_rtc_mutex);
+static const struct i2c_device_id m41t80_id[] = {
+	{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
+	{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
+	{ "m41t80", M41T80_FEATURE_SQ },
+	{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
+	{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+	{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, m41t80_id);
+
+static const struct of_device_id m41t80_of_match[] = {
+	{
+		.compatible = "st,m41t62",
+		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
+	},
+	{
+		.compatible = "st,m41t65",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
+	},
+	{
+		.compatible = "st,m41t80",
+		.data = (void *)(M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t81",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t81s",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t82",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t83",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t84",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t85",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "st,m41t87",
+		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
+	},
+	{
+		.compatible = "microcrystal,rv4162",
+		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
+	},
+	/* DT compatibility only, do not use compatibles below: */
+	{
+		.compatible = "st,rv4162",
+		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
+	},
+	{
+		.compatible = "rv4162",
+		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, m41t80_of_match);
+
+struct m41t80_data {
+	unsigned long features;
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw sqw;
+	unsigned long freq;
+	unsigned int sqwe;
+#endif
+};
+
+static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct m41t80_data *m41t80 = i2c_get_clientdata(client);
+	struct mutex *lock = &m41t80->rtc->ops_lock;
+	unsigned long events = 0;
+	int flags, flags_afe;
+
+	mutex_lock(lock);
+
+	flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+	if (flags_afe < 0) {
+		mutex_unlock(lock);
+		return IRQ_NONE;
+	}
+
+	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+	if (flags <= 0) {
+		mutex_unlock(lock);
+		return IRQ_NONE;
+	}
+
+	if (flags & M41T80_FLAGS_AF) {
+		flags &= ~M41T80_FLAGS_AF;
+		flags_afe &= ~M41T80_ALMON_AFE;
+		events |= RTC_AF;
+	}
+
+	if (events) {
+		rtc_update_irq(m41t80->rtc, 1, events);
+		i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
+		i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+					  flags_afe);
+	}
+
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int m41t80_get_datetime(struct i2c_client *client,
+			       struct rtc_time *tm)
+{
+	unsigned char buf[8];
+	int err, flags;
+
+	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+	if (flags < 0)
+		return flags;
+
+	if (flags & M41T80_FLAGS_OF) {
+		dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
+		return -EINVAL;
+	}
+
+	err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to read date\n");
+		return -EIO;
+	}
+
+	tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
+	tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
+	tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
+	tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
+	tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
+	tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
+
+	/* assume 20YY not 19YY, and ignore the Century Bit */
+	tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
+	return rtc_valid_tm(tm);
+}
+
+/* Sets the given date and time to the real time clock. */
+static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct m41t80_data *clientdata = i2c_get_clientdata(client);
+	unsigned char buf[8];
+	int err, flags;
+
+	if (tm->tm_year < 100 || tm->tm_year > 199)
+		return -EINVAL;
+
+	buf[M41T80_REG_SSEC] = 0;
+	buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
+	buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
+	buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
+	buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
+	buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
+	buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
+	buf[M41T80_REG_WDAY] = tm->tm_wday;
+
+	/* If the square wave output is controlled in the weekday register */
+	if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
+		int val;
+
+		val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
+		if (val < 0)
+			return val;
+
+		buf[M41T80_REG_WDAY] |= (val & 0xf0);
+	}
+
+	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
+					     sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write to date registers\n");
+		return err;
+	}
+
+	/* Clear the OF bit of Flags Register */
+	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+	if (flags < 0)
+		return flags;
+
+	if (i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
+				      flags & ~M41T80_FLAGS_OF)) {
+		dev_err(&client->dev, "Unable to write flags register\n");
+		return -EIO;
+	}
+
+	return err;
+}
+
+static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct m41t80_data *clientdata = i2c_get_clientdata(client);
+	u8 reg;
+
+	if (clientdata->features & M41T80_FEATURE_BL) {
+		reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+		seq_printf(seq, "battery\t\t: %s\n",
+			   (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
+	}
+	return 0;
+}
+
+static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return m41t80_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return m41t80_set_datetime(to_i2c_client(dev), tm);
+}
+
+static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int flags, retval;
+
+	flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+	if (flags < 0)
+		return flags;
+
+	if (enabled)
+		flags |= M41T80_ALMON_AFE;
+	else
+		flags &= ~M41T80_ALMON_AFE;
+
+	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
+	if (retval < 0) {
+		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
+		return retval;
+	}
+	return 0;
+}
+
+static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 alarmvals[5];
+	int ret, err;
+
+	alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
+	alarmvals[1] = bin2bcd(alrm->time.tm_mday);
+	alarmvals[2] = bin2bcd(alrm->time.tm_hour);
+	alarmvals[3] = bin2bcd(alrm->time.tm_min);
+	alarmvals[4] = bin2bcd(alrm->time.tm_sec);
+
+	/* Clear AF and AFE flags */
+	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+	if (ret < 0)
+		return ret;
+	err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+					ret & ~(M41T80_ALMON_AFE));
+	if (err < 0) {
+		dev_err(dev, "Unable to clear AFE bit\n");
+		return err;
+	}
+
+	/* Keep SQWE bit value */
+	alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
+
+	ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+	if (ret < 0)
+		return ret;
+
+	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
+					ret & ~(M41T80_FLAGS_AF));
+	if (err < 0) {
+		dev_err(dev, "Unable to clear AF bit\n");
+		return err;
+	}
+
+	/* Write the alarm */
+	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
+					     5, alarmvals);
+	if (err)
+		return err;
+
+	/* Enable the alarm interrupt */
+	if (alrm->enabled) {
+		alarmvals[0] |= M41T80_ALMON_AFE;
+		err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+						alarmvals[0]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 alarmvals[5];
+	int flags, ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
+					    5, alarmvals);
+	if (ret != 5)
+		return ret < 0 ? ret : -EIO;
+
+	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
+	if (flags < 0)
+		return flags;
+
+	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
+	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
+	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
+	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
+	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f) - 1;
+
+	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
+	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
+
+	return 0;
+}
+
+static struct rtc_class_ops m41t80_rtc_ops = {
+	.read_time = m41t80_rtc_read_time,
+	.set_time = m41t80_rtc_set_time,
+	.proc = m41t80_rtc_proc,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int m41t80_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq >= 0 && device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int m41t80_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq >= 0 && device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
+
+#ifdef CONFIG_COMMON_CLK
+#define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
+
+static unsigned long m41t80_decode_freq(int setting)
+{
+	return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
+		M41T80_SQW_MAX_FREQ >> setting;
+}
+
+static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
+{
+	struct i2c_client *client = m41t80->client;
+	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
+		M41T80_REG_WDAY : M41T80_REG_SQW;
+	int ret = i2c_smbus_read_byte_data(client, reg_sqw);
+
+	if (ret < 0)
+		return 0;
+	return m41t80_decode_freq(ret >> 4);
+}
+
+static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	return sqw_to_m41t80_data(hw)->freq;
+}
+
+static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	if (rate >= M41T80_SQW_MAX_FREQ)
+		return M41T80_SQW_MAX_FREQ;
+	if (rate >= M41T80_SQW_MAX_FREQ / 4)
+		return M41T80_SQW_MAX_FREQ / 4;
+	if (!rate)
+		return 0;
+	return 1 << ilog2(rate);
+}
+
+static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+	struct i2c_client *client = m41t80->client;
+	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
+		M41T80_REG_WDAY : M41T80_REG_SQW;
+	int reg, ret, val = 0;
+
+	if (rate >= M41T80_SQW_MAX_FREQ)
+		val = 1;
+	else if (rate >= M41T80_SQW_MAX_FREQ / 4)
+		val = 2;
+	else if (rate)
+		val = 15 - ilog2(rate);
+
+	reg = i2c_smbus_read_byte_data(client, reg_sqw);
+	if (reg < 0)
+		return reg;
+
+	reg = (reg & 0x0f) | (val << 4);
+
+	ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
+	if (!ret)
+		m41t80->freq = m41t80_decode_freq(val);
+	return ret;
+}
+
+static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
+{
+	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+	struct i2c_client *client = m41t80->client;
+	int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		ret |= M41T80_ALMON_SQWE;
+	else
+		ret &= ~M41T80_ALMON_SQWE;
+
+	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
+	if (!ret)
+		m41t80->sqwe = enable;
+	return ret;
+}
+
+static int m41t80_sqw_prepare(struct clk_hw *hw)
+{
+	return m41t80_sqw_control(hw, 1);
+}
+
+static void m41t80_sqw_unprepare(struct clk_hw *hw)
+{
+	m41t80_sqw_control(hw, 0);
+}
+
+static int m41t80_sqw_is_prepared(struct clk_hw *hw)
+{
+	return sqw_to_m41t80_data(hw)->sqwe;
+}
+
+static const struct clk_ops m41t80_sqw_ops = {
+	.prepare = m41t80_sqw_prepare,
+	.unprepare = m41t80_sqw_unprepare,
+	.is_prepared = m41t80_sqw_is_prepared,
+	.recalc_rate = m41t80_sqw_recalc_rate,
+	.round_rate = m41t80_sqw_round_rate,
+	.set_rate = m41t80_sqw_set_rate,
+};
+
+static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
+{
+	struct i2c_client *client = m41t80->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk *clk;
+	struct clk_init_data init;
+	int ret;
+
+	/* First disable the clock */
+	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+	if (ret < 0)
+		return ERR_PTR(ret);
+	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+					ret & ~(M41T80_ALMON_SQWE));
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	init.name = "m41t80-sqw";
+	init.ops = &m41t80_sqw_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	m41t80->sqw.init = &init;
+	m41t80->freq = m41t80_get_freq(m41t80);
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = clk_register(&client->dev, &m41t80->sqw);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+#ifdef CONFIG_RTC_DRV_M41T80_WDT
+/*
+ *****************************************************************************
+ *
+ * Watchdog Driver
+ *
+ *****************************************************************************
+ */
+static struct i2c_client *save_client;
+
+/* Default margin */
+#define WD_TIMO 60		/* 1..31 seconds */
+
+static int wdt_margin = WD_TIMO;
+module_param(wdt_margin, int, 0);
+MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
+
+static unsigned long wdt_is_open;
+static int boot_flag;
+
+/**
+ *	wdt_ping:
+ *
+ *	Reload counter one with the watchdog timeout. We don't bother reloading
+ *	the cascade counter.
+ */
+static void wdt_ping(void)
+{
+	unsigned char i2c_data[2];
+	struct i2c_msg msgs1[1] = {
+		{
+			.addr	= save_client->addr,
+			.flags	= 0,
+			.len	= 2,
+			.buf	= i2c_data,
+		},
+	};
+	struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
+
+	i2c_data[0] = 0x09;		/* watchdog register */
+
+	if (wdt_margin > 31)
+		i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
+	else
+		/*
+		 * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
+		 */
+		i2c_data[1] = wdt_margin << 2 | 0x82;
+
+	/*
+	 * M41T65 has three bits for watchdog resolution.  Don't set bit 7, as
+	 * that would be an invalid resolution.
+	 */
+	if (clientdata->features & M41T80_FEATURE_WD)
+		i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
+
+	i2c_transfer(save_client->adapter, msgs1, 1);
+}
+
+/**
+ *	wdt_disable:
+ *
+ *	disables watchdog.
+ */
+static void wdt_disable(void)
+{
+	unsigned char i2c_data[2], i2c_buf[0x10];
+	struct i2c_msg msgs0[2] = {
+		{
+			.addr	= save_client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= i2c_data,
+		},
+		{
+			.addr	= save_client->addr,
+			.flags	= I2C_M_RD,
+			.len	= 1,
+			.buf	= i2c_buf,
+		},
+	};
+	struct i2c_msg msgs1[1] = {
+		{
+			.addr	= save_client->addr,
+			.flags	= 0,
+			.len	= 2,
+			.buf	= i2c_data,
+		},
+	};
+
+	i2c_data[0] = 0x09;
+	i2c_transfer(save_client->adapter, msgs0, 2);
+
+	i2c_data[0] = 0x09;
+	i2c_data[1] = 0x00;
+	i2c_transfer(save_client->adapter, msgs1, 1);
+}
+
+/**
+ *	wdt_write:
+ *	@file: file handle to the watchdog
+ *	@buf: buffer to write (unused as data does not matter here
+ *	@count: count of bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we we don't define content meaning.
+ */
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	if (count) {
+		wdt_ping();
+		return 1;
+	}
+	return 0;
+}
+
+static ssize_t wdt_read(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	return 0;
+}
+
+/**
+ *	wdt_ioctl:
+ *	@inode: inode of the device
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features. We only actually usefully support
+ *	querying capabilities and current status.
+ */
+static int wdt_ioctl(struct file *file, unsigned int cmd,
+		     unsigned long arg)
+{
+	int new_margin, rv;
+	static struct watchdog_info ident = {
+		.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
+			WDIOF_SETTIMEOUT,
+		.firmware_version = 1,
+		.identity = "M41T80 WTD"
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((struct watchdog_info __user *)arg, &ident,
+				    sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(boot_flag, (int __user *)arg);
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, (int __user *)arg))
+			return -EFAULT;
+		/* Arbitrary, can't find the card's limits */
+		if (new_margin < 1 || new_margin > 124)
+			return -EINVAL;
+		wdt_margin = new_margin;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_margin, (int __user *)arg);
+
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
+			return -EFAULT;
+
+		if (rv & WDIOS_DISABLECARD) {
+			pr_info("disable watchdog\n");
+			wdt_disable();
+		}
+
+		if (rv & WDIOS_ENABLECARD) {
+			pr_info("enable watchdog\n");
+			wdt_ping();
+		}
+
+		return -EINVAL;
+	}
+	return -ENOTTY;
+}
+
+static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
+			       unsigned long arg)
+{
+	int ret;
+
+	mutex_lock(&m41t80_rtc_mutex);
+	ret = wdt_ioctl(file, cmd, arg);
+	mutex_unlock(&m41t80_rtc_mutex);
+
+	return ret;
+}
+
+/**
+ *	wdt_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ */
+static int wdt_open(struct inode *inode, struct file *file)
+{
+	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
+		mutex_lock(&m41t80_rtc_mutex);
+		if (test_and_set_bit(0, &wdt_is_open)) {
+			mutex_unlock(&m41t80_rtc_mutex);
+			return -EBUSY;
+		}
+		/*
+		 *	Activate
+		 */
+		wdt_is_open = 1;
+		mutex_unlock(&m41t80_rtc_mutex);
+		return nonseekable_open(inode, file);
+	}
+	return -ENODEV;
+}
+
+/**
+ *	wdt_close:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ */
+static int wdt_release(struct inode *inode, struct file *file)
+{
+	if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
+		clear_bit(0, &wdt_is_open);
+	return 0;
+}
+
+/**
+ *	notify_sys:
+ *	@this: our notifier block
+ *	@code: the event being reported
+ *	@unused: unused
+ *
+ *	Our notifier is called on system shutdowns. We want to turn the card
+ *	off at reboot otherwise the machine will reboot again during memory
+ *	test or worse yet during the following fsck. This would suck, in fact
+ *	trust me - if it happens it does suck.
+ */
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+			  void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		/* Disable Watchdog */
+		wdt_disable();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations wdt_fops = {
+	.owner	= THIS_MODULE,
+	.read	= wdt_read,
+	.unlocked_ioctl = wdt_unlocked_ioctl,
+	.write	= wdt_write,
+	.open	= wdt_open,
+	.release = wdt_release,
+	.llseek = no_llseek,
+};
+
+static struct miscdevice wdt_dev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	The WDT card needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+#endif /* CONFIG_RTC_DRV_M41T80_WDT */
+
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface
+ *
+ *****************************************************************************
+ */
+
+static int m41t80_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	int rc = 0;
+	struct rtc_time tm;
+	struct m41t80_data *m41t80_data = NULL;
+	bool wakeup_source = false;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
+		return -ENODEV;
+	}
+
+	m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
+				   GFP_KERNEL);
+	if (!m41t80_data)
+		return -ENOMEM;
+
+	m41t80_data->client = client;
+	if (client->dev.of_node)
+		m41t80_data->features = (unsigned long)
+			of_device_get_match_data(&client->dev);
+	else
+		m41t80_data->features = id->driver_data;
+	i2c_set_clientdata(client, m41t80_data);
+
+	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(m41t80_data->rtc))
+		return PTR_ERR(m41t80_data->rtc);
+
+#ifdef CONFIG_OF
+	wakeup_source = of_property_read_bool(client->dev.of_node,
+					      "wakeup-source");
+#endif
+	if (client->irq > 0) {
+		rc = devm_request_threaded_irq(&client->dev, client->irq,
+					       NULL, m41t80_handle_irq,
+					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					       "m41t80", client);
+		if (rc) {
+			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
+			client->irq = 0;
+			wakeup_source = false;
+		}
+	}
+	if (client->irq > 0 || wakeup_source) {
+		m41t80_rtc_ops.read_alarm = m41t80_read_alarm;
+		m41t80_rtc_ops.set_alarm = m41t80_set_alarm;
+		m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable;
+		/* Enable the wakealarm */
+		device_init_wakeup(&client->dev, true);
+	}
+
+	m41t80_data->rtc->ops = &m41t80_rtc_ops;
+
+	if (client->irq <= 0) {
+		/* We cannot support UIE mode if we do not have an IRQ line */
+		m41t80_data->rtc->uie_unsupported = 1;
+	}
+
+	/* Make sure HT (Halt Update) bit is cleared */
+	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
+
+	if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
+		if (m41t80_data->features & M41T80_FEATURE_HT) {
+			m41t80_get_datetime(client, &tm);
+			dev_info(&client->dev, "HT bit was set!\n");
+			dev_info(&client->dev,
+				 "Power Down at %04i-%02i-%02i %02i:%02i:%02i\n",
+				 tm.tm_year + 1900,
+				 tm.tm_mon + 1, tm.tm_mday, tm.tm_hour,
+				 tm.tm_min, tm.tm_sec);
+		}
+		rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
+					       rc & ~M41T80_ALHOUR_HT);
+	}
+
+	if (rc < 0) {
+		dev_err(&client->dev, "Can't clear HT bit\n");
+		return rc;
+	}
+
+	/* Make sure ST (stop) bit is cleared */
+	rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
+
+	if (rc >= 0 && rc & M41T80_SEC_ST)
+		rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
+					       rc & ~M41T80_SEC_ST);
+	if (rc < 0) {
+		dev_err(&client->dev, "Can't clear ST bit\n");
+		return rc;
+	}
+
+#ifdef CONFIG_RTC_DRV_M41T80_WDT
+	if (m41t80_data->features & M41T80_FEATURE_HT) {
+		save_client = client;
+		rc = misc_register(&wdt_dev);
+		if (rc)
+			return rc;
+		rc = register_reboot_notifier(&wdt_notifier);
+		if (rc) {
+			misc_deregister(&wdt_dev);
+			return rc;
+		}
+	}
+#endif
+#ifdef CONFIG_COMMON_CLK
+	if (m41t80_data->features & M41T80_FEATURE_SQ)
+		m41t80_sqw_register_clk(m41t80_data);
+#endif
+
+	rc = rtc_register_device(m41t80_data->rtc);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int m41t80_remove(struct i2c_client *client)
+{
+#ifdef CONFIG_RTC_DRV_M41T80_WDT
+	struct m41t80_data *clientdata = i2c_get_clientdata(client);
+
+	if (clientdata->features & M41T80_FEATURE_HT) {
+		misc_deregister(&wdt_dev);
+		unregister_reboot_notifier(&wdt_notifier);
+	}
+#endif
+
+	return 0;
+}
+
+static struct i2c_driver m41t80_driver = {
+	.driver = {
+		.name = "rtc-m41t80",
+		.of_match_table = of_match_ptr(m41t80_of_match),
+		.pm = &m41t80_pm,
+	},
+	.probe = m41t80_probe,
+	.remove = m41t80_remove,
+	.id_table = m41t80_id,
+};
+
+module_i2c_driver(m41t80_driver);
+
+MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
+MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t93.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t93.c
new file mode 100644
index 0000000..5ac45fc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t93.c
@@ -0,0 +1,209 @@
+/*
+ *
+ * Driver for ST M41T93 SPI RTC
+ *
+ * (c) 2010 Nikolaus Voss, Weinmann Medical GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcd.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+
+#define M41T93_REG_SSEC			0
+#define M41T93_REG_ST_SEC		1
+#define M41T93_REG_MIN			2
+#define M41T93_REG_CENT_HOUR		3
+#define M41T93_REG_WDAY			4
+#define M41T93_REG_DAY			5
+#define M41T93_REG_MON			6
+#define M41T93_REG_YEAR			7
+
+
+#define M41T93_REG_ALM_HOUR_HT		0xc
+#define M41T93_REG_FLAGS		0xf
+
+#define M41T93_FLAG_ST			(1 << 7)
+#define M41T93_FLAG_OF			(1 << 2)
+#define M41T93_FLAG_BL			(1 << 4)
+#define M41T93_FLAG_HT			(1 << 6)
+
+static inline int m41t93_set_reg(struct spi_device *spi, u8 addr, u8 data)
+{
+	u8 buf[2];
+
+	/* MSB must be '1' to write */
+	buf[0] = addr | 0x80;
+	buf[1] = data;
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+static int m41t93_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int tmp;
+	u8 buf[9] = {0x80};        /* write cmd + 8 data bytes */
+	u8 * const data = &buf[1]; /* ptr to first data byte */
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	if (tm->tm_year < 100) {
+		dev_warn(&spi->dev, "unsupported date (before 2000-01-01).\n");
+		return -EINVAL;
+	}
+
+	tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
+	if (tmp < 0)
+		return tmp;
+
+	if (tmp & M41T93_FLAG_OF) {
+		dev_warn(&spi->dev, "OF bit is set, resetting.\n");
+		m41t93_set_reg(spi, M41T93_REG_FLAGS, tmp & ~M41T93_FLAG_OF);
+
+		tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
+		if (tmp < 0) {
+			return tmp;
+		} else if (tmp & M41T93_FLAG_OF) {
+			/* OF cannot be immediately reset: oscillator has to be
+			 * restarted. */
+			u8 reset_osc = buf[M41T93_REG_ST_SEC] | M41T93_FLAG_ST;
+
+			dev_warn(&spi->dev,
+				 "OF bit is still set, kickstarting clock.\n");
+			m41t93_set_reg(spi, M41T93_REG_ST_SEC, reset_osc);
+			reset_osc &= ~M41T93_FLAG_ST;
+			m41t93_set_reg(spi, M41T93_REG_ST_SEC, reset_osc);
+		}
+	}
+
+	data[M41T93_REG_SSEC]		= 0;
+	data[M41T93_REG_ST_SEC]		= bin2bcd(tm->tm_sec);
+	data[M41T93_REG_MIN]		= bin2bcd(tm->tm_min);
+	data[M41T93_REG_CENT_HOUR]	= bin2bcd(tm->tm_hour) |
+						((tm->tm_year/100-1) << 6);
+	data[M41T93_REG_DAY]		= bin2bcd(tm->tm_mday);
+	data[M41T93_REG_WDAY]		= bin2bcd(tm->tm_wday + 1);
+	data[M41T93_REG_MON]		= bin2bcd(tm->tm_mon + 1);
+	data[M41T93_REG_YEAR]		= bin2bcd(tm->tm_year % 100);
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+
+static int m41t93_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	const u8 start_addr = 0;
+	u8 buf[8];
+	int century_after_1900;
+	int tmp;
+	int ret = 0;
+
+	/* Check status of clock. Two states must be considered:
+	   1. halt bit (HT) is set: the clock is running but update of readout
+	      registers has been disabled due to power failure. This is normal
+	      case after poweron. Time is valid after resetting HT bit.
+	   2. oscillator fail bit (OF) is set: time is invalid.
+	*/
+	tmp = spi_w8r8(spi, M41T93_REG_ALM_HOUR_HT);
+	if (tmp < 0)
+		return tmp;
+
+	if (tmp & M41T93_FLAG_HT) {
+		dev_dbg(&spi->dev, "HT bit is set, reenable clock update.\n");
+		m41t93_set_reg(spi, M41T93_REG_ALM_HOUR_HT,
+			       tmp & ~M41T93_FLAG_HT);
+	}
+
+	tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
+	if (tmp < 0)
+		return tmp;
+
+	if (tmp & M41T93_FLAG_OF) {
+		ret = -EINVAL;
+		dev_warn(&spi->dev, "OF bit is set, write time to restart.\n");
+	}
+
+	if (tmp & M41T93_FLAG_BL)
+		dev_warn(&spi->dev, "BL bit is set, replace battery.\n");
+
+	/* read actual time/date */
+	tmp = spi_write_then_read(spi, &start_addr, 1, buf, sizeof(buf));
+	if (tmp < 0)
+		return tmp;
+
+	tm->tm_sec	= bcd2bin(buf[M41T93_REG_ST_SEC]);
+	tm->tm_min	= bcd2bin(buf[M41T93_REG_MIN]);
+	tm->tm_hour	= bcd2bin(buf[M41T93_REG_CENT_HOUR] & 0x3f);
+	tm->tm_mday	= bcd2bin(buf[M41T93_REG_DAY]);
+	tm->tm_mon	= bcd2bin(buf[M41T93_REG_MON]) - 1;
+	tm->tm_wday	= bcd2bin(buf[M41T93_REG_WDAY] & 0x0f) - 1;
+
+	century_after_1900 = (buf[M41T93_REG_CENT_HOUR] >> 6) + 1;
+	tm->tm_year = bcd2bin(buf[M41T93_REG_YEAR]) + century_after_1900 * 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return ret < 0 ? ret : rtc_valid_tm(tm);
+}
+
+
+static const struct rtc_class_ops m41t93_rtc_ops = {
+	.read_time	= m41t93_get_time,
+	.set_time	= m41t93_set_time,
+};
+
+static struct spi_driver m41t93_driver;
+
+static int m41t93_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	int res;
+
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = spi_w8r8(spi, M41T93_REG_WDAY);
+	if (res < 0 || (res & 0xf8) != 0) {
+		dev_err(&spi->dev, "not found 0x%x.\n", res);
+		return -ENODEV;
+	}
+
+	rtc = devm_rtc_device_register(&spi->dev, m41t93_driver.driver.name,
+					&m41t93_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	return 0;
+}
+
+static struct spi_driver m41t93_driver = {
+	.driver = {
+		.name	= "rtc-m41t93",
+	},
+	.probe	= m41t93_probe,
+};
+
+module_spi_driver(m41t93_driver);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
+MODULE_DESCRIPTION("Driver for ST M41T93 SPI RTC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-m41t93");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t94.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t94.c
new file mode 100644
index 0000000..1f0eb79
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m41t94.c
@@ -0,0 +1,149 @@
+/*
+ * Driver for ST M41T94 SPI RTC
+ *
+ * Copyright (C) 2008 Kim B. Heino
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define M41T94_REG_SECONDS	0x01
+#define M41T94_REG_MINUTES	0x02
+#define M41T94_REG_HOURS	0x03
+#define M41T94_REG_WDAY		0x04
+#define M41T94_REG_DAY		0x05
+#define M41T94_REG_MONTH	0x06
+#define M41T94_REG_YEAR		0x07
+#define M41T94_REG_HT		0x0c
+
+#define M41T94_BIT_HALT		0x40
+#define M41T94_BIT_STOP		0x80
+#define M41T94_BIT_CB		0x40
+#define M41T94_BIT_CEB		0x80
+
+static int m41t94_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[8]; /* write cmd + 7 registers */
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */
+	buf[M41T94_REG_SECONDS] = bin2bcd(tm->tm_sec);
+	buf[M41T94_REG_MINUTES] = bin2bcd(tm->tm_min);
+	buf[M41T94_REG_HOURS]   = bin2bcd(tm->tm_hour);
+	buf[M41T94_REG_WDAY]    = bin2bcd(tm->tm_wday + 1);
+	buf[M41T94_REG_DAY]     = bin2bcd(tm->tm_mday);
+	buf[M41T94_REG_MONTH]   = bin2bcd(tm->tm_mon + 1);
+
+	buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB;
+	if (tm->tm_year >= 100)
+		buf[M41T94_REG_HOURS] |= M41T94_BIT_CB;
+	buf[M41T94_REG_YEAR] = bin2bcd(tm->tm_year % 100);
+
+	return spi_write(spi, buf, 8);
+}
+
+static int m41t94_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[2];
+	int ret, hour;
+
+	/* clear halt update bit */
+	ret = spi_w8r8(spi, M41T94_REG_HT);
+	if (ret < 0)
+		return ret;
+	if (ret & M41T94_BIT_HALT) {
+		buf[0] = 0x80 | M41T94_REG_HT;
+		buf[1] = ret & ~M41T94_BIT_HALT;
+		spi_write(spi, buf, 2);
+	}
+
+	/* clear stop bit */
+	ret = spi_w8r8(spi, M41T94_REG_SECONDS);
+	if (ret < 0)
+		return ret;
+	if (ret & M41T94_BIT_STOP) {
+		buf[0] = 0x80 | M41T94_REG_SECONDS;
+		buf[1] = ret & ~M41T94_BIT_STOP;
+		spi_write(spi, buf, 2);
+	}
+
+	tm->tm_sec  = bcd2bin(spi_w8r8(spi, M41T94_REG_SECONDS));
+	tm->tm_min  = bcd2bin(spi_w8r8(spi, M41T94_REG_MINUTES));
+	hour = spi_w8r8(spi, M41T94_REG_HOURS);
+	tm->tm_hour = bcd2bin(hour & 0x3f);
+	tm->tm_wday = bcd2bin(spi_w8r8(spi, M41T94_REG_WDAY)) - 1;
+	tm->tm_mday = bcd2bin(spi_w8r8(spi, M41T94_REG_DAY));
+	tm->tm_mon  = bcd2bin(spi_w8r8(spi, M41T94_REG_MONTH)) - 1;
+	tm->tm_year = bcd2bin(spi_w8r8(spi, M41T94_REG_YEAR));
+	if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB))
+		tm->tm_year += 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* initial clock setting can be undefined */
+	return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops m41t94_rtc_ops = {
+	.read_time	= m41t94_read_time,
+	.set_time	= m41t94_set_time,
+};
+
+static struct spi_driver m41t94_driver;
+
+static int m41t94_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	int res;
+
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = spi_w8r8(spi, M41T94_REG_SECONDS);
+	if (res < 0) {
+		dev_err(&spi->dev, "not found.\n");
+		return res;
+	}
+
+	rtc = devm_rtc_device_register(&spi->dev, m41t94_driver.driver.name,
+					&m41t94_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	return 0;
+}
+
+static struct spi_driver m41t94_driver = {
+	.driver = {
+		.name	= "rtc-m41t94",
+	},
+	.probe	= m41t94_probe,
+};
+
+module_spi_driver(m41t94_driver);
+
+MODULE_AUTHOR("Kim B. Heino <Kim.Heino@bluegiga.com>");
+MODULE_DESCRIPTION("Driver for ST M41T94 SPI RTC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-m41t94");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t35.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t35.c
new file mode 100644
index 0000000..810f4ea
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t35.c
@@ -0,0 +1,191 @@
+/*
+ * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Written by Ulf Carlsson (ulfc@engr.sgi.com)
+ *
+ * Copyright (C) 2008 Thomas Bogendoerfer
+ *
+ * Based on code written by Paul Gortmaker.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/bcd.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+struct m48t35_rtc {
+	u8	pad[0x7ff8];    /* starts at 0x7ff8 */
+	u8	control;
+	u8	sec;
+	u8	min;
+	u8	hour;
+	u8	day;
+	u8	date;
+	u8	month;
+	u8	year;
+};
+
+#define M48T35_RTC_SET		0x80
+#define M48T35_RTC_READ		0x40
+
+struct m48t35_priv {
+	struct rtc_device *rtc;
+	struct m48t35_rtc __iomem *reg;
+	size_t size;
+	unsigned long baseaddr;
+	spinlock_t lock;
+};
+
+static int m48t35_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct m48t35_priv *priv = dev_get_drvdata(dev);
+	u8 control;
+
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	spin_lock_irq(&priv->lock);
+	control = readb(&priv->reg->control);
+	writeb(control | M48T35_RTC_READ, &priv->reg->control);
+	tm->tm_sec = readb(&priv->reg->sec);
+	tm->tm_min = readb(&priv->reg->min);
+	tm->tm_hour = readb(&priv->reg->hour);
+	tm->tm_mday = readb(&priv->reg->date);
+	tm->tm_mon = readb(&priv->reg->month);
+	tm->tm_year = readb(&priv->reg->year);
+	writeb(control, &priv->reg->control);
+	spin_unlock_irq(&priv->lock);
+
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
+	tm->tm_year = bcd2bin(tm->tm_year);
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	tm->tm_year += 70;
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	tm->tm_mon--;
+	return rtc_valid_tm(tm);
+}
+
+static int m48t35_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct m48t35_priv *priv = dev_get_drvdata(dev);
+	unsigned char mon, day, hrs, min, sec;
+	unsigned int yrs;
+	u8 control;
+
+	yrs = tm->tm_year + 1900;
+	mon = tm->tm_mon + 1;   /* tm_mon starts at zero */
+	day = tm->tm_mday;
+	hrs = tm->tm_hour;
+	min = tm->tm_min;
+	sec = tm->tm_sec;
+
+	if (yrs < 1970)
+		return -EINVAL;
+
+	yrs -= 1970;
+	if (yrs > 255)    /* They are unsigned */
+		return -EINVAL;
+
+	if (yrs > 169)
+		return -EINVAL;
+
+	if (yrs >= 100)
+		yrs -= 100;
+
+	sec = bin2bcd(sec);
+	min = bin2bcd(min);
+	hrs = bin2bcd(hrs);
+	day = bin2bcd(day);
+	mon = bin2bcd(mon);
+	yrs = bin2bcd(yrs);
+
+	spin_lock_irq(&priv->lock);
+	control = readb(&priv->reg->control);
+	writeb(control | M48T35_RTC_SET, &priv->reg->control);
+	writeb(yrs, &priv->reg->year);
+	writeb(mon, &priv->reg->month);
+	writeb(day, &priv->reg->date);
+	writeb(hrs, &priv->reg->hour);
+	writeb(min, &priv->reg->min);
+	writeb(sec, &priv->reg->sec);
+	writeb(control, &priv->reg->control);
+	spin_unlock_irq(&priv->lock);
+	return 0;
+}
+
+static const struct rtc_class_ops m48t35_ops = {
+	.read_time	= m48t35_read_time,
+	.set_time	= m48t35_set_time,
+};
+
+static int m48t35_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct m48t35_priv *priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct m48t35_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->size = resource_size(res);
+	/*
+	 * kludge: remove the #ifndef after ioc3 resource
+	 * conflicts are resolved
+	 */
+#ifndef CONFIG_SGI_IP27
+	if (!devm_request_mem_region(&pdev->dev, res->start, priv->size,
+				     pdev->name))
+		return -EBUSY;
+#endif
+	priv->baseaddr = res->start;
+	priv->reg = devm_ioremap(&pdev->dev, priv->baseaddr, priv->size);
+	if (!priv->reg)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->rtc = devm_rtc_device_register(&pdev->dev, "m48t35",
+				  &m48t35_ops, THIS_MODULE);
+	return PTR_ERR_OR_ZERO(priv->rtc);
+}
+
+static struct platform_driver m48t35_platform_driver = {
+	.driver		= {
+		.name	= "rtc-m48t35",
+	},
+	.probe		= m48t35_probe,
+};
+
+module_platform_driver(m48t35_platform_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
+MODULE_DESCRIPTION("M48T35 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-m48t35");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t59.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t59.c
new file mode 100644
index 0000000..d99a705
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t59.c
@@ -0,0 +1,518 @@
+/*
+ * ST M48T59 RTC driver
+ *
+ * Copyright (c) 2007 Wind River Systems, Inc.
+ *
+ * Author: Mark Zhan <rongkai.zhan@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/rtc/m48t59.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+#ifndef NO_IRQ
+#define NO_IRQ	(-1)
+#endif
+
+#define M48T59_READ(reg) (pdata->read_byte(dev, pdata->offset + reg))
+#define M48T59_WRITE(val, reg) \
+	(pdata->write_byte(dev, pdata->offset + reg, val))
+
+#define M48T59_SET_BITS(mask, reg)	\
+	M48T59_WRITE((M48T59_READ(reg) | (mask)), (reg))
+#define M48T59_CLEAR_BITS(mask, reg)	\
+	M48T59_WRITE((M48T59_READ(reg) & ~(mask)), (reg))
+
+struct m48t59_private {
+	void __iomem *ioaddr;
+	int irq;
+	struct rtc_device *rtc;
+	spinlock_t lock; /* serialize the NVRAM and RTC access */
+};
+
+/*
+ * This is the generic access method when the chip is memory-mapped
+ */
+static void
+m48t59_mem_writeb(struct device *dev, u32 ofs, u8 val)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+
+	writeb(val, m48t59->ioaddr+ofs);
+}
+
+static u8
+m48t59_mem_readb(struct device *dev, u32 ofs)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+
+	return readb(m48t59->ioaddr+ofs);
+}
+
+/*
+ * NOTE: M48T59 only uses BCD mode
+ */
+static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u8 val;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	/* Issue the READ command */
+	M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL);
+
+	tm->tm_year	= bcd2bin(M48T59_READ(M48T59_YEAR));
+	/* tm_mon is 0-11 */
+	tm->tm_mon	= bcd2bin(M48T59_READ(M48T59_MONTH)) - 1;
+	tm->tm_mday	= bcd2bin(M48T59_READ(M48T59_MDAY));
+
+	val = M48T59_READ(M48T59_WDAY);
+	if ((pdata->type == M48T59RTC_TYPE_M48T59) &&
+	    (val & M48T59_WDAY_CEB) && (val & M48T59_WDAY_CB)) {
+		dev_dbg(dev, "Century bit is enabled\n");
+		tm->tm_year += 100;	/* one century */
+	}
+#ifdef CONFIG_SPARC
+	/* Sun SPARC machines count years since 1968 */
+	tm->tm_year += 68;
+#endif
+
+	tm->tm_wday	= bcd2bin(val & 0x07);
+	tm->tm_hour	= bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F);
+	tm->tm_min	= bcd2bin(M48T59_READ(M48T59_MIN) & 0x7F);
+	tm->tm_sec	= bcd2bin(M48T59_READ(M48T59_SEC) & 0x7F);
+
+	/* Clear the READ bit */
+	M48T59_CLEAR_BITS(M48T59_CNTL_READ, M48T59_CNTL);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	dev_dbg(dev, "RTC read time %04d-%02d-%02d %02d/%02d/%02d\n",
+		tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+	return rtc_valid_tm(tm);
+}
+
+static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u8 val = 0;
+	int year = tm->tm_year;
+
+#ifdef CONFIG_SPARC
+	/* Sun SPARC machines count years since 1968 */
+	year -= 68;
+#endif
+
+	dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n",
+		year + 1900, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	if (year < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	/* Issue the WRITE command */
+	M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL);
+
+	M48T59_WRITE((bin2bcd(tm->tm_sec) & 0x7F), M48T59_SEC);
+	M48T59_WRITE((bin2bcd(tm->tm_min) & 0x7F), M48T59_MIN);
+	M48T59_WRITE((bin2bcd(tm->tm_hour) & 0x3F), M48T59_HOUR);
+	M48T59_WRITE((bin2bcd(tm->tm_mday) & 0x3F), M48T59_MDAY);
+	/* tm_mon is 0-11 */
+	M48T59_WRITE((bin2bcd(tm->tm_mon + 1) & 0x1F), M48T59_MONTH);
+	M48T59_WRITE(bin2bcd(year % 100), M48T59_YEAR);
+
+	if (pdata->type == M48T59RTC_TYPE_M48T59 && (year / 100))
+		val = (M48T59_WDAY_CEB | M48T59_WDAY_CB);
+	val |= (bin2bcd(tm->tm_wday) & 0x07);
+	M48T59_WRITE(val, M48T59_WDAY);
+
+	/* Clear the WRITE bit */
+	M48T59_CLEAR_BITS(M48T59_CNTL_WRITE, M48T59_CNTL);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+	return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int m48t59_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned long flags;
+	u8 val;
+
+	/* If no irq, we don't support ALARM */
+	if (m48t59->irq == NO_IRQ)
+		return -EIO;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	/* Issue the READ command */
+	M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL);
+
+	tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR));
+#ifdef CONFIG_SPARC
+	/* Sun SPARC machines count years since 1968 */
+	tm->tm_year += 68;
+#endif
+	/* tm_mon is 0-11 */
+	tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1;
+
+	val = M48T59_READ(M48T59_WDAY);
+	if ((val & M48T59_WDAY_CEB) && (val & M48T59_WDAY_CB))
+		tm->tm_year += 100;	/* one century */
+
+	tm->tm_mday = bcd2bin(M48T59_READ(M48T59_ALARM_DATE));
+	tm->tm_hour = bcd2bin(M48T59_READ(M48T59_ALARM_HOUR));
+	tm->tm_min = bcd2bin(M48T59_READ(M48T59_ALARM_MIN));
+	tm->tm_sec = bcd2bin(M48T59_READ(M48T59_ALARM_SEC));
+
+	/* Clear the READ bit */
+	M48T59_CLEAR_BITS(M48T59_CNTL_READ, M48T59_CNTL);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	dev_dbg(dev, "RTC read alarm time %04d-%02d-%02d %02d/%02d/%02d\n",
+		tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+	return rtc_valid_tm(tm);
+}
+
+/*
+ * Set alarm time and date in RTC
+ */
+static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	struct rtc_time *tm = &alrm->time;
+	u8 mday, hour, min, sec;
+	unsigned long flags;
+	int year = tm->tm_year;
+
+#ifdef CONFIG_SPARC
+	/* Sun SPARC machines count years since 1968 */
+	year -= 68;
+#endif
+
+	/* If no irq, we don't support ALARM */
+	if (m48t59->irq == NO_IRQ)
+		return -EIO;
+
+	if (year < 0)
+		return -EINVAL;
+
+	/*
+	 * 0xff means "always match"
+	 */
+	mday = tm->tm_mday;
+	mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
+	if (mday == 0xff)
+		mday = M48T59_READ(M48T59_MDAY);
+
+	hour = tm->tm_hour;
+	hour = (hour < 24) ? bin2bcd(hour) : 0x00;
+
+	min = tm->tm_min;
+	min = (min < 60) ? bin2bcd(min) : 0x00;
+
+	sec = tm->tm_sec;
+	sec = (sec < 60) ? bin2bcd(sec) : 0x00;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	/* Issue the WRITE command */
+	M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL);
+
+	M48T59_WRITE(mday, M48T59_ALARM_DATE);
+	M48T59_WRITE(hour, M48T59_ALARM_HOUR);
+	M48T59_WRITE(min, M48T59_ALARM_MIN);
+	M48T59_WRITE(sec, M48T59_ALARM_SEC);
+
+	/* Clear the WRITE bit */
+	M48T59_CLEAR_BITS(M48T59_CNTL_WRITE, M48T59_CNTL);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	dev_dbg(dev, "RTC set alarm time %04d-%02d-%02d %02d/%02d/%02d\n",
+		year + 1900, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+	return 0;
+}
+
+/*
+ * Handle commands from user-space
+ */
+static int m48t59_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	if (enabled)
+		M48T59_WRITE(M48T59_INTR_AFE, M48T59_INTR);
+	else
+		M48T59_WRITE(0x00, M48T59_INTR);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	return 0;
+}
+
+static int m48t59_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u8 val;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+	val = M48T59_READ(M48T59_FLAGS);
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	seq_printf(seq, "battery\t\t: %s\n",
+		 (val & M48T59_FLAGS_BF) ? "low" : "normal");
+	return 0;
+}
+
+/*
+ * IRQ handler for the RTC
+ */
+static irqreturn_t m48t59_rtc_interrupt(int irq, void *dev_id)
+{
+	struct device *dev = (struct device *)dev_id;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	u8 event;
+
+	spin_lock(&m48t59->lock);
+	event = M48T59_READ(M48T59_FLAGS);
+	spin_unlock(&m48t59->lock);
+
+	if (event & M48T59_FLAGS_AF) {
+		rtc_update_irq(m48t59->rtc, 1, (RTC_AF | RTC_IRQF));
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static const struct rtc_class_ops m48t59_rtc_ops = {
+	.read_time	= m48t59_rtc_read_time,
+	.set_time	= m48t59_rtc_set_time,
+	.read_alarm	= m48t59_rtc_readalarm,
+	.set_alarm	= m48t59_rtc_setalarm,
+	.proc		= m48t59_rtc_proc,
+	.alarm_irq_enable = m48t59_rtc_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops m48t02_rtc_ops = {
+	.read_time	= m48t59_rtc_read_time,
+	.set_time	= m48t59_rtc_set_time,
+};
+
+static ssize_t m48t59_nvram_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	ssize_t cnt = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+
+	for (; cnt < size; cnt++)
+		*buf++ = M48T59_READ(cnt);
+
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	return cnt;
+}
+
+static ssize_t m48t59_nvram_write(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
+	ssize_t cnt = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&m48t59->lock, flags);
+
+	for (; cnt < size; cnt++)
+		M48T59_WRITE(*buf++, cnt);
+
+	spin_unlock_irqrestore(&m48t59->lock, flags);
+
+	return cnt;
+}
+
+static struct bin_attribute m48t59_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.read = m48t59_nvram_read,
+	.write = m48t59_nvram_write,
+};
+
+static int m48t59_rtc_probe(struct platform_device *pdev)
+{
+	struct m48t59_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct m48t59_private *m48t59 = NULL;
+	struct resource *res;
+	int ret = -ENOMEM;
+	char *name;
+	const struct rtc_class_ops *ops;
+
+	/* This chip could be memory-mapped or I/O-mapped */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		if (!res)
+			return -EINVAL;
+	}
+
+	if (res->flags & IORESOURCE_IO) {
+		/* If we are I/O-mapped, the platform should provide
+		 * the operations accessing chip registers.
+		 */
+		if (!pdata || !pdata->write_byte || !pdata->read_byte)
+			return -EINVAL;
+	} else if (res->flags & IORESOURCE_MEM) {
+		/* we are memory-mapped */
+		if (!pdata) {
+			pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata),
+						GFP_KERNEL);
+			if (!pdata)
+				return -ENOMEM;
+			/* Ensure we only kmalloc platform data once */
+			pdev->dev.platform_data = pdata;
+		}
+		if (!pdata->type)
+			pdata->type = M48T59RTC_TYPE_M48T59;
+
+		/* Try to use the generic memory read/write ops */
+		if (!pdata->write_byte)
+			pdata->write_byte = m48t59_mem_writeb;
+		if (!pdata->read_byte)
+			pdata->read_byte = m48t59_mem_readb;
+	}
+
+	m48t59 = devm_kzalloc(&pdev->dev, sizeof(*m48t59), GFP_KERNEL);
+	if (!m48t59)
+		return -ENOMEM;
+
+	m48t59->ioaddr = pdata->ioaddr;
+
+	if (!m48t59->ioaddr) {
+		/* ioaddr not mapped externally */
+		m48t59->ioaddr = devm_ioremap(&pdev->dev, res->start,
+						resource_size(res));
+		if (!m48t59->ioaddr)
+			return ret;
+	}
+
+	/* Try to get irq number. We also can work in
+	 * the mode without IRQ.
+	 */
+	m48t59->irq = platform_get_irq(pdev, 0);
+	if (m48t59->irq <= 0)
+		m48t59->irq = NO_IRQ;
+
+	if (m48t59->irq != NO_IRQ) {
+		ret = devm_request_irq(&pdev->dev, m48t59->irq,
+				m48t59_rtc_interrupt, IRQF_SHARED,
+				"rtc-m48t59", &pdev->dev);
+		if (ret)
+			return ret;
+	}
+	switch (pdata->type) {
+	case M48T59RTC_TYPE_M48T59:
+		name = "m48t59";
+		ops = &m48t59_rtc_ops;
+		pdata->offset = 0x1ff0;
+		break;
+	case M48T59RTC_TYPE_M48T02:
+		name = "m48t02";
+		ops = &m48t02_rtc_ops;
+		pdata->offset = 0x7f0;
+		break;
+	case M48T59RTC_TYPE_M48T08:
+		name = "m48t08";
+		ops = &m48t02_rtc_ops;
+		pdata->offset = 0x1ff0;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown RTC type\n");
+		return -ENODEV;
+	}
+
+	spin_lock_init(&m48t59->lock);
+	platform_set_drvdata(pdev, m48t59);
+
+	m48t59->rtc = devm_rtc_device_register(&pdev->dev, name, ops,
+						THIS_MODULE);
+	if (IS_ERR(m48t59->rtc))
+		return PTR_ERR(m48t59->rtc);
+
+	m48t59_nvram_attr.size = pdata->offset;
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &m48t59_nvram_attr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int m48t59_rtc_remove(struct platform_device *pdev)
+{
+	sysfs_remove_bin_file(&pdev->dev.kobj, &m48t59_nvram_attr);
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-m48t59");
+
+static struct platform_driver m48t59_rtc_driver = {
+	.driver		= {
+		.name	= "rtc-m48t59",
+	},
+	.probe		= m48t59_rtc_probe,
+	.remove		= m48t59_rtc_remove,
+};
+
+module_platform_driver(m48t59_rtc_driver);
+
+MODULE_AUTHOR("Mark Zhan <rongkai.zhan@windriver.com>");
+MODULE_DESCRIPTION("M48T59/M48T02/M48T08 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t86.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t86.c
new file mode 100644
index 0000000..02af045
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-m48t86.c
@@ -0,0 +1,292 @@
+/*
+ * ST M48T86 / Dallas DS12887 RTC driver
+ * Copyright (c) 2006 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This drivers only supports the clock running in BCD and 24H mode.
+ * If it will be ever adapted to binary and 12H mode, care must be taken
+ * to not introduce bugs.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/bcd.h>
+#include <linux/io.h>
+
+#define M48T86_SEC		0x00
+#define M48T86_SECALRM		0x01
+#define M48T86_MIN		0x02
+#define M48T86_MINALRM		0x03
+#define M48T86_HOUR		0x04
+#define M48T86_HOURALRM		0x05
+#define M48T86_DOW		0x06 /* 1 = sunday */
+#define M48T86_DOM		0x07
+#define M48T86_MONTH		0x08 /* 1 - 12 */
+#define M48T86_YEAR		0x09 /* 0 - 99 */
+#define M48T86_A		0x0a
+#define M48T86_B		0x0b
+#define M48T86_B_SET		BIT(7)
+#define M48T86_B_DM		BIT(2)
+#define M48T86_B_H24		BIT(1)
+#define M48T86_C		0x0c
+#define M48T86_D		0x0d
+#define M48T86_D_VRT		BIT(7)
+#define M48T86_NVRAM(x)		(0x0e + (x))
+#define M48T86_NVRAM_LEN	114
+
+struct m48t86_rtc_info {
+	void __iomem *index_reg;
+	void __iomem *data_reg;
+	struct rtc_device *rtc;
+};
+
+static unsigned char m48t86_readb(struct device *dev, unsigned long addr)
+{
+	struct m48t86_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char value;
+
+	writeb(addr, info->index_reg);
+	value = readb(info->data_reg);
+
+	return value;
+}
+
+static void m48t86_writeb(struct device *dev,
+			  unsigned char value, unsigned long addr)
+{
+	struct m48t86_rtc_info *info = dev_get_drvdata(dev);
+
+	writeb(addr, info->index_reg);
+	writeb(value, info->data_reg);
+}
+
+static int m48t86_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char reg;
+
+	reg = m48t86_readb(dev, M48T86_B);
+
+	if (reg & M48T86_B_DM) {
+		/* data (binary) mode */
+		tm->tm_sec	= m48t86_readb(dev, M48T86_SEC);
+		tm->tm_min	= m48t86_readb(dev, M48T86_MIN);
+		tm->tm_hour	= m48t86_readb(dev, M48T86_HOUR) & 0x3f;
+		tm->tm_mday	= m48t86_readb(dev, M48T86_DOM);
+		/* tm_mon is 0-11 */
+		tm->tm_mon	= m48t86_readb(dev, M48T86_MONTH) - 1;
+		tm->tm_year	= m48t86_readb(dev, M48T86_YEAR) + 100;
+		tm->tm_wday	= m48t86_readb(dev, M48T86_DOW);
+	} else {
+		/* bcd mode */
+		tm->tm_sec	= bcd2bin(m48t86_readb(dev, M48T86_SEC));
+		tm->tm_min	= bcd2bin(m48t86_readb(dev, M48T86_MIN));
+		tm->tm_hour	= bcd2bin(m48t86_readb(dev, M48T86_HOUR) &
+					  0x3f);
+		tm->tm_mday	= bcd2bin(m48t86_readb(dev, M48T86_DOM));
+		/* tm_mon is 0-11 */
+		tm->tm_mon	= bcd2bin(m48t86_readb(dev, M48T86_MONTH)) - 1;
+		tm->tm_year	= bcd2bin(m48t86_readb(dev, M48T86_YEAR)) + 100;
+		tm->tm_wday	= bcd2bin(m48t86_readb(dev, M48T86_DOW));
+	}
+
+	/* correct the hour if the clock is in 12h mode */
+	if (!(reg & M48T86_B_H24))
+		if (m48t86_readb(dev, M48T86_HOUR) & 0x80)
+			tm->tm_hour += 12;
+
+	return rtc_valid_tm(tm);
+}
+
+static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char reg;
+
+	reg = m48t86_readb(dev, M48T86_B);
+
+	/* update flag and 24h mode */
+	reg |= M48T86_B_SET | M48T86_B_H24;
+	m48t86_writeb(dev, reg, M48T86_B);
+
+	if (reg & M48T86_B_DM) {
+		/* data (binary) mode */
+		m48t86_writeb(dev, tm->tm_sec, M48T86_SEC);
+		m48t86_writeb(dev, tm->tm_min, M48T86_MIN);
+		m48t86_writeb(dev, tm->tm_hour, M48T86_HOUR);
+		m48t86_writeb(dev, tm->tm_mday, M48T86_DOM);
+		m48t86_writeb(dev, tm->tm_mon + 1, M48T86_MONTH);
+		m48t86_writeb(dev, tm->tm_year % 100, M48T86_YEAR);
+		m48t86_writeb(dev, tm->tm_wday, M48T86_DOW);
+	} else {
+		/* bcd mode */
+		m48t86_writeb(dev, bin2bcd(tm->tm_sec), M48T86_SEC);
+		m48t86_writeb(dev, bin2bcd(tm->tm_min), M48T86_MIN);
+		m48t86_writeb(dev, bin2bcd(tm->tm_hour), M48T86_HOUR);
+		m48t86_writeb(dev, bin2bcd(tm->tm_mday), M48T86_DOM);
+		m48t86_writeb(dev, bin2bcd(tm->tm_mon + 1), M48T86_MONTH);
+		m48t86_writeb(dev, bin2bcd(tm->tm_year % 100), M48T86_YEAR);
+		m48t86_writeb(dev, bin2bcd(tm->tm_wday), M48T86_DOW);
+	}
+
+	/* update ended */
+	reg &= ~M48T86_B_SET;
+	m48t86_writeb(dev, reg, M48T86_B);
+
+	return 0;
+}
+
+static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	unsigned char reg;
+
+	reg = m48t86_readb(dev, M48T86_B);
+
+	seq_printf(seq, "mode\t\t: %s\n",
+		   (reg & M48T86_B_DM) ? "binary" : "bcd");
+
+	reg = m48t86_readb(dev, M48T86_D);
+
+	seq_printf(seq, "battery\t\t: %s\n",
+		   (reg & M48T86_D_VRT) ? "ok" : "exhausted");
+
+	return 0;
+}
+
+static const struct rtc_class_ops m48t86_rtc_ops = {
+	.read_time	= m48t86_rtc_read_time,
+	.set_time	= m48t86_rtc_set_time,
+	.proc		= m48t86_rtc_proc,
+};
+
+static ssize_t m48t86_nvram_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *attr,
+				 char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	unsigned int i;
+
+	for (i = 0; i < count; i++)
+		buf[i] = m48t86_readb(dev, M48T86_NVRAM(off + i));
+
+	return count;
+}
+
+static ssize_t m48t86_nvram_write(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *attr,
+				  char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	unsigned int i;
+
+	for (i = 0; i < count; i++)
+		m48t86_writeb(dev, buf[i], M48T86_NVRAM(off + i));
+
+	return count;
+}
+
+static BIN_ATTR(nvram, 0644, m48t86_nvram_read, m48t86_nvram_write,
+		M48T86_NVRAM_LEN);
+
+/*
+ * The RTC is an optional feature at purchase time on some Technologic Systems
+ * boards. Verify that it actually exists by checking if the last two bytes
+ * of the NVRAM can be changed.
+ *
+ * This is based on the method used in their rtc7800.c example.
+ */
+static bool m48t86_verify_chip(struct platform_device *pdev)
+{
+	unsigned int offset0 = M48T86_NVRAM(M48T86_NVRAM_LEN - 2);
+	unsigned int offset1 = M48T86_NVRAM(M48T86_NVRAM_LEN - 1);
+	unsigned char tmp0, tmp1;
+
+	tmp0 = m48t86_readb(&pdev->dev, offset0);
+	tmp1 = m48t86_readb(&pdev->dev, offset1);
+
+	m48t86_writeb(&pdev->dev, 0x00, offset0);
+	m48t86_writeb(&pdev->dev, 0x55, offset1);
+	if (m48t86_readb(&pdev->dev, offset1) == 0x55) {
+		m48t86_writeb(&pdev->dev, 0xaa, offset1);
+		if (m48t86_readb(&pdev->dev, offset1) == 0xaa &&
+		    m48t86_readb(&pdev->dev, offset0) == 0x00) {
+			m48t86_writeb(&pdev->dev, tmp0, offset0);
+			m48t86_writeb(&pdev->dev, tmp1, offset1);
+
+			return true;
+		}
+	}
+	return false;
+}
+
+static int m48t86_rtc_probe(struct platform_device *pdev)
+{
+	struct m48t86_rtc_info *info;
+	struct resource *res;
+	unsigned char reg;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+	info->index_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->index_reg))
+		return PTR_ERR(info->index_reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -ENODEV;
+	info->data_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->data_reg))
+		return PTR_ERR(info->data_reg);
+
+	dev_set_drvdata(&pdev->dev, info);
+
+	if (!m48t86_verify_chip(pdev)) {
+		dev_info(&pdev->dev, "RTC not present\n");
+		return -ENODEV;
+	}
+
+	info->rtc = devm_rtc_device_register(&pdev->dev, "m48t86",
+					     &m48t86_rtc_ops, THIS_MODULE);
+	if (IS_ERR(info->rtc))
+		return PTR_ERR(info->rtc);
+
+	/* read battery status */
+	reg = m48t86_readb(&pdev->dev, M48T86_D);
+	dev_info(&pdev->dev, "battery %s\n",
+		 (reg & M48T86_D_VRT) ? "ok" : "exhausted");
+
+	if (device_create_bin_file(&pdev->dev, &bin_attr_nvram))
+		dev_err(&pdev->dev, "failed to create nvram sysfs entry\n");
+
+	return 0;
+}
+
+static int m48t86_rtc_remove(struct platform_device *pdev)
+{
+	device_remove_bin_file(&pdev->dev, &bin_attr_nvram);
+	return 0;
+}
+
+static struct platform_driver m48t86_rtc_platform_driver = {
+	.driver		= {
+		.name	= "rtc-m48t86",
+	},
+	.probe		= m48t86_rtc_probe,
+	.remove		= m48t86_rtc_remove,
+};
+
+module_platform_driver(m48t86_rtc_platform_driver);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("M48T86 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-m48t86");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max6900.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6900.c
new file mode 100644
index 0000000..cbdc86a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6900.c
@@ -0,0 +1,247 @@
+/*
+ * rtc class driver for the Maxim MAX6900 chip
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * based on previously existing rtc class drivers
+ *
+ * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+
+/*
+ * register indices
+ */
+#define MAX6900_REG_SC			0	/* seconds      00-59 */
+#define MAX6900_REG_MN			1	/* minutes      00-59 */
+#define MAX6900_REG_HR			2	/* hours        00-23 */
+#define MAX6900_REG_DT			3	/* day of month 00-31 */
+#define MAX6900_REG_MO			4	/* month        01-12 */
+#define MAX6900_REG_DW			5	/* day of week   1-7  */
+#define MAX6900_REG_YR			6	/* year         00-99 */
+#define MAX6900_REG_CT			7	/* control */
+						/* register 8 is undocumented */
+#define MAX6900_REG_CENTURY		9	/* century */
+#define MAX6900_REG_LEN			10
+
+#define MAX6900_BURST_LEN		8	/* can burst r/w first 8 regs */
+
+#define MAX6900_REG_CT_WP		(1 << 7)	/* Write Protect */
+
+/*
+ * register read/write commands
+ */
+#define MAX6900_REG_CONTROL_WRITE	0x8e
+#define MAX6900_REG_CENTURY_WRITE	0x92
+#define MAX6900_REG_CENTURY_READ	0x93
+#define MAX6900_REG_RESERVED_READ	0x96
+#define MAX6900_REG_BURST_WRITE		0xbe
+#define MAX6900_REG_BURST_READ		0xbf
+
+#define MAX6900_IDLE_TIME_AFTER_WRITE	3	/* specification says 2.5 mS */
+
+static struct i2c_driver max6900_driver;
+
+static int max6900_i2c_read_regs(struct i2c_client *client, u8 *buf)
+{
+	u8 reg_burst_read[1] = { MAX6900_REG_BURST_READ };
+	u8 reg_century_read[1] = { MAX6900_REG_CENTURY_READ };
+	struct i2c_msg msgs[4] = {
+		{
+		 .addr = client->addr,
+		 .flags = 0,	/* write */
+		 .len = sizeof(reg_burst_read),
+		 .buf = reg_burst_read}
+		,
+		{
+		 .addr = client->addr,
+		 .flags = I2C_M_RD,
+		 .len = MAX6900_BURST_LEN,
+		 .buf = buf}
+		,
+		{
+		 .addr = client->addr,
+		 .flags = 0,	/* write */
+		 .len = sizeof(reg_century_read),
+		 .buf = reg_century_read}
+		,
+		{
+		 .addr = client->addr,
+		 .flags = I2C_M_RD,
+		 .len = sizeof(buf[MAX6900_REG_CENTURY]),
+		 .buf = &buf[MAX6900_REG_CENTURY]
+		 }
+	};
+	int rc;
+
+	rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (rc != ARRAY_SIZE(msgs)) {
+		dev_err(&client->dev, "%s: register read failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int max6900_i2c_write_regs(struct i2c_client *client, u8 const *buf)
+{
+	u8 i2c_century_buf[1 + 1] = { MAX6900_REG_CENTURY_WRITE };
+	struct i2c_msg century_msgs[1] = {
+		{
+		 .addr = client->addr,
+		 .flags = 0,	/* write */
+		 .len = sizeof(i2c_century_buf),
+		 .buf = i2c_century_buf}
+	};
+	u8 i2c_burst_buf[MAX6900_BURST_LEN + 1] = { MAX6900_REG_BURST_WRITE };
+	struct i2c_msg burst_msgs[1] = {
+		{
+		 .addr = client->addr,
+		 .flags = 0,	/* write */
+		 .len = sizeof(i2c_burst_buf),
+		 .buf = i2c_burst_buf}
+	};
+	int rc;
+
+	/*
+	 * We have to make separate calls to i2c_transfer because of
+	 * the need to delay after each write to the chip.  Also,
+	 * we write the century byte first, since we set the write-protect
+	 * bit as part of the burst write.
+	 */
+	i2c_century_buf[1] = buf[MAX6900_REG_CENTURY];
+
+	rc = i2c_transfer(client->adapter, century_msgs,
+			  ARRAY_SIZE(century_msgs));
+	if (rc != ARRAY_SIZE(century_msgs))
+		goto write_failed;
+
+	msleep(MAX6900_IDLE_TIME_AFTER_WRITE);
+
+	memcpy(&i2c_burst_buf[1], buf, MAX6900_BURST_LEN);
+
+	rc = i2c_transfer(client->adapter, burst_msgs, ARRAY_SIZE(burst_msgs));
+	if (rc != ARRAY_SIZE(burst_msgs))
+		goto write_failed;
+	msleep(MAX6900_IDLE_TIME_AFTER_WRITE);
+
+	return 0;
+
+ write_failed:
+	dev_err(&client->dev, "%s: register write failed\n", __func__);
+	return -EIO;
+}
+
+static int max6900_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
+{
+	int rc;
+	u8 regs[MAX6900_REG_LEN];
+
+	rc = max6900_i2c_read_regs(client, regs);
+	if (rc < 0)
+		return rc;
+
+	tm->tm_sec = bcd2bin(regs[MAX6900_REG_SC]);
+	tm->tm_min = bcd2bin(regs[MAX6900_REG_MN]);
+	tm->tm_hour = bcd2bin(regs[MAX6900_REG_HR] & 0x3f);
+	tm->tm_mday = bcd2bin(regs[MAX6900_REG_DT]);
+	tm->tm_mon = bcd2bin(regs[MAX6900_REG_MO]) - 1;
+	tm->tm_year = bcd2bin(regs[MAX6900_REG_YR]) +
+		      bcd2bin(regs[MAX6900_REG_CENTURY]) * 100 - 1900;
+	tm->tm_wday = bcd2bin(regs[MAX6900_REG_DW]);
+
+	return rtc_valid_tm(tm);
+}
+
+static int max6900_i2c_clear_write_protect(struct i2c_client *client)
+{
+	return i2c_smbus_write_byte_data(client, MAX6900_REG_CONTROL_WRITE, 0);
+}
+
+static int
+max6900_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
+{
+	u8 regs[MAX6900_REG_LEN];
+	int rc;
+
+	rc = max6900_i2c_clear_write_protect(client);
+	if (rc < 0)
+		return rc;
+
+	regs[MAX6900_REG_SC] = bin2bcd(tm->tm_sec);
+	regs[MAX6900_REG_MN] = bin2bcd(tm->tm_min);
+	regs[MAX6900_REG_HR] = bin2bcd(tm->tm_hour);
+	regs[MAX6900_REG_DT] = bin2bcd(tm->tm_mday);
+	regs[MAX6900_REG_MO] = bin2bcd(tm->tm_mon + 1);
+	regs[MAX6900_REG_DW] = bin2bcd(tm->tm_wday);
+	regs[MAX6900_REG_YR] = bin2bcd(tm->tm_year % 100);
+	regs[MAX6900_REG_CENTURY] = bin2bcd((tm->tm_year + 1900) / 100);
+	/* set write protect */
+	regs[MAX6900_REG_CT] = MAX6900_REG_CT_WP;
+
+	rc = max6900_i2c_write_regs(client, regs);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int max6900_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return max6900_i2c_read_time(to_i2c_client(dev), tm);
+}
+
+static int max6900_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return max6900_i2c_set_time(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops max6900_rtc_ops = {
+	.read_time = max6900_rtc_read_time,
+	.set_time = max6900_rtc_set_time,
+};
+
+static int
+max6900_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct rtc_device *rtc;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	rtc = devm_rtc_device_register(&client->dev, max6900_driver.driver.name,
+					&max6900_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	return 0;
+}
+
+static const struct i2c_device_id max6900_id[] = {
+	{ "max6900", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6900_id);
+
+static struct i2c_driver max6900_driver = {
+	.driver = {
+		   .name = "rtc-max6900",
+		   },
+	.probe = max6900_probe,
+	.id_table = max6900_id,
+};
+
+module_i2c_driver(max6900_driver);
+
+MODULE_DESCRIPTION("Maxim MAX6900 RTC driver");
+MODULE_AUTHOR("Dale Farnsworth <dale@farnsworth.org>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max6902.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6902.c
new file mode 100644
index 0000000..315d09e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6902.c
@@ -0,0 +1,158 @@
+/* drivers/rtc/rtc-max6902.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for MAX6902 spi RTC
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define MAX6902_REG_SECONDS		0x01
+#define MAX6902_REG_MINUTES		0x03
+#define MAX6902_REG_HOURS		0x05
+#define MAX6902_REG_DATE		0x07
+#define MAX6902_REG_MONTH		0x09
+#define MAX6902_REG_DAY			0x0B
+#define MAX6902_REG_YEAR		0x0D
+#define MAX6902_REG_CONTROL		0x0F
+#define MAX6902_REG_CENTURY		0x13
+
+static int max6902_set_reg(struct device *dev, unsigned char address,
+				unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	/* MSB must be '0' to write */
+	buf[0] = address & 0x7f;
+	buf[1] = data;
+
+	return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int max6902_get_reg(struct device *dev, unsigned char address,
+				unsigned char *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	/* Set MSB to indicate read */
+	*data = address | 0x80;
+
+	return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+static int max6902_read_time(struct device *dev, struct rtc_time *dt)
+{
+	int err, century;
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[8];
+
+	buf[0] = 0xbf;	/* Burst read */
+
+	err = spi_write_then_read(spi, buf, 1, buf, 8);
+	if (err != 0)
+		return err;
+
+	/* The chip sends data in this order:
+	 * Seconds, Minutes, Hours, Date, Month, Day, Year */
+	dt->tm_sec	= bcd2bin(buf[0]);
+	dt->tm_min	= bcd2bin(buf[1]);
+	dt->tm_hour	= bcd2bin(buf[2]);
+	dt->tm_mday	= bcd2bin(buf[3]);
+	dt->tm_mon	= bcd2bin(buf[4]) - 1;
+	dt->tm_wday	= bcd2bin(buf[5]);
+	dt->tm_year	= bcd2bin(buf[6]);
+
+	/* Read century */
+	err = max6902_get_reg(dev, MAX6902_REG_CENTURY, &buf[0]);
+	if (err != 0)
+		return err;
+
+	century = bcd2bin(buf[0]) * 100;
+
+	dt->tm_year += century;
+	dt->tm_year -= 1900;
+
+	return rtc_valid_tm(dt);
+}
+
+static int max6902_set_time(struct device *dev, struct rtc_time *dt)
+{
+	dt->tm_year = dt->tm_year + 1900;
+
+	/* Remove write protection */
+	max6902_set_reg(dev, MAX6902_REG_CONTROL, 0);
+
+	max6902_set_reg(dev, MAX6902_REG_SECONDS, bin2bcd(dt->tm_sec));
+	max6902_set_reg(dev, MAX6902_REG_MINUTES, bin2bcd(dt->tm_min));
+	max6902_set_reg(dev, MAX6902_REG_HOURS, bin2bcd(dt->tm_hour));
+
+	max6902_set_reg(dev, MAX6902_REG_DATE, bin2bcd(dt->tm_mday));
+	max6902_set_reg(dev, MAX6902_REG_MONTH, bin2bcd(dt->tm_mon + 1));
+	max6902_set_reg(dev, MAX6902_REG_DAY, bin2bcd(dt->tm_wday));
+	max6902_set_reg(dev, MAX6902_REG_YEAR, bin2bcd(dt->tm_year % 100));
+	max6902_set_reg(dev, MAX6902_REG_CENTURY, bin2bcd(dt->tm_year / 100));
+
+	/* Compulab used a delay here. However, the datasheet
+	 * does not mention a delay being required anywhere... */
+	/* delay(2000); */
+
+	/* Write protect */
+	max6902_set_reg(dev, MAX6902_REG_CONTROL, 0x80);
+
+	return 0;
+}
+
+static const struct rtc_class_ops max6902_rtc_ops = {
+	.read_time	= max6902_read_time,
+	.set_time	= max6902_set_time,
+};
+
+static int max6902_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	unsigned char tmp;
+	int res;
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = max6902_get_reg(&spi->dev, MAX6902_REG_SECONDS, &tmp);
+	if (res != 0)
+		return res;
+
+	rtc = devm_rtc_device_register(&spi->dev, "max6902",
+				&max6902_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+	return 0;
+}
+
+static struct spi_driver max6902_driver = {
+	.driver = {
+		.name	= "rtc-max6902",
+	},
+	.probe	= max6902_probe,
+};
+
+module_spi_driver(max6902_driver);
+
+MODULE_DESCRIPTION("max6902 spi RTC driver");
+MODULE_AUTHOR("Raphael Assenat");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-max6902");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max6916.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6916.c
new file mode 100644
index 0000000..623ab27
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max6916.c
@@ -0,0 +1,164 @@
+/* rtc-max6916.c
+ *
+ * Driver for MAXIM  max6916 Low Current, SPI Compatible
+ * Real Time Clock
+ *
+ * Author : Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+/* Registers in max6916 rtc */
+
+#define MAX6916_SECONDS_REG	0x01
+#define MAX6916_MINUTES_REG	0x02
+#define MAX6916_HOURS_REG	0x03
+#define MAX6916_DATE_REG	0x04
+#define MAX6916_MONTH_REG	0x05
+#define MAX6916_DAY_REG	0x06
+#define MAX6916_YEAR_REG	0x07
+#define MAX6916_CONTROL_REG	0x08
+#define MAX6916_STATUS_REG	0x0C
+#define MAX6916_CLOCK_BURST	0x3F
+
+static int max6916_read_reg(struct device *dev, unsigned char address,
+			    unsigned char *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	*data = address | 0x80;
+
+	return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+static int max6916_write_reg(struct device *dev, unsigned char address,
+			     unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = address & 0x7F;
+	buf[1] = data;
+
+	return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int max6916_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int err;
+	unsigned char buf[8];
+
+	buf[0] = MAX6916_CLOCK_BURST | 0x80;
+
+	err = spi_write_then_read(spi, buf, 1, buf, 8);
+
+	if (err)
+		return err;
+
+	dt->tm_sec = bcd2bin(buf[0]);
+	dt->tm_min = bcd2bin(buf[1]);
+	dt->tm_hour = bcd2bin(buf[2] & 0x3F);
+	dt->tm_mday = bcd2bin(buf[3]);
+	dt->tm_mon = bcd2bin(buf[4]) - 1;
+	dt->tm_wday = bcd2bin(buf[5]) - 1;
+	dt->tm_year = bcd2bin(buf[6]) + 100;
+
+	return rtc_valid_tm(dt);
+}
+
+static int max6916_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[9];
+
+	if (dt->tm_year < 100 || dt->tm_year > 199) {
+		dev_err(&spi->dev, "Year must be between 2000 and 2099. It's %d.\n",
+			dt->tm_year + 1900);
+	return -EINVAL;
+	}
+
+	buf[0] = MAX6916_CLOCK_BURST & 0x7F;
+	buf[1] = bin2bcd(dt->tm_sec);
+	buf[2] = bin2bcd(dt->tm_min);
+	buf[3] = (bin2bcd(dt->tm_hour) & 0X3F);
+	buf[4] = bin2bcd(dt->tm_mday);
+	buf[5] = bin2bcd(dt->tm_mon + 1);
+	buf[6] = bin2bcd(dt->tm_wday + 1);
+	buf[7] = bin2bcd(dt->tm_year % 100);
+	buf[8] = bin2bcd(0x00);
+
+	/* write the rtc settings */
+	return spi_write_then_read(spi, buf, 9, NULL, 0);
+}
+
+static const struct rtc_class_ops max6916_rtc_ops = {
+	.read_time = max6916_read_time,
+	.set_time = max6916_set_time,
+};
+
+static int max6916_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	unsigned char data;
+	int res;
+
+	/* spi setup with max6916 in mode 3 and bits per word as 8 */
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	/* RTC Settings */
+	res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data);
+	if (res)
+		return res;
+
+	/* Disable the write protect of rtc */
+	max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+	data = data & ~(1 << 7);
+	max6916_write_reg(&spi->dev, MAX6916_CONTROL_REG, data);
+
+	/*Enable oscillator,disable oscillator stop flag, glitch filter*/
+	max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+	data = data & 0x1B;
+	max6916_write_reg(&spi->dev, MAX6916_STATUS_REG, data);
+
+	/* display the settings */
+	max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+	dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data);
+
+	max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+	dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data);
+
+	rtc = devm_rtc_device_register(&spi->dev, "max6916",
+				       &max6916_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	return 0;
+}
+
+static struct spi_driver max6916_driver = {
+	.driver = {
+		.name = "max6916",
+	},
+	.probe = max6916_probe,
+};
+module_spi_driver(max6916_driver);
+
+MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER");
+MODULE_AUTHOR("Venkat Prashanth B U <venkat.prashanth2498@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max77686.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max77686.c
new file mode 100644
index 0000000..182fdd0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max77686.c
@@ -0,0 +1,864 @@
+/*
+ * RTC driver for Maxim MAX77686 and MAX77802
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ *  based on rtc-max8997.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+#define MAX77686_I2C_ADDR_RTC		(0x0C >> 1)
+#define MAX77620_I2C_ADDR_RTC		0x68
+#define MAX77686_INVALID_I2C_ADDR	(-1)
+
+/* Define non existing register */
+#define MAX77686_INVALID_REG		(-1)
+
+/* RTC Control Register */
+#define BCD_EN_SHIFT			0
+#define BCD_EN_MASK			BIT(BCD_EN_SHIFT)
+#define MODEL24_SHIFT			1
+#define MODEL24_MASK			BIT(MODEL24_SHIFT)
+/* RTC Update Register1 */
+#define RTC_UDR_SHIFT			0
+#define RTC_UDR_MASK			BIT(RTC_UDR_SHIFT)
+#define RTC_RBUDR_SHIFT			4
+#define RTC_RBUDR_MASK			BIT(RTC_RBUDR_SHIFT)
+/* RTC Hour register */
+#define HOUR_PM_SHIFT			6
+#define HOUR_PM_MASK			BIT(HOUR_PM_SHIFT)
+/* RTC Alarm Enable */
+#define ALARM_ENABLE_SHIFT		7
+#define ALARM_ENABLE_MASK		BIT(ALARM_ENABLE_SHIFT)
+
+#define REG_RTC_NONE			0xdeadbeef
+
+/*
+ * MAX77802 has separate register (RTCAE1) for alarm enable instead
+ * using 1 bit from registers RTC{SEC,MIN,HOUR,DAY,MONTH,YEAR,DATE}
+ * as in done in MAX77686.
+ */
+#define MAX77802_ALARM_ENABLE_VALUE	0x77
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_MONTH,
+	RTC_YEAR,
+	RTC_DATE,
+	RTC_NR_TIME
+};
+
+struct max77686_rtc_driver_data {
+	/* Minimum usecs needed for a RTC update */
+	unsigned long		delay;
+	/* Mask used to read RTC registers value */
+	u8			mask;
+	/* Registers offset to I2C addresses map */
+	const unsigned int	*map;
+	/* Has a separate alarm enable register? */
+	bool			alarm_enable_reg;
+	/* I2C address for RTC block */
+	int			rtc_i2c_addr;
+	/* RTC interrupt via platform resource */
+	bool			rtc_irq_from_platform;
+	/* Pending alarm status register */
+	int			alarm_pending_status_reg;
+	/* RTC IRQ CHIP for regmap */
+	const struct regmap_irq_chip *rtc_irq_chip;
+};
+
+struct max77686_rtc_info {
+	struct device		*dev;
+	struct i2c_client	*rtc;
+	struct rtc_device	*rtc_dev;
+	struct mutex		lock;
+
+	struct regmap		*regmap;
+	struct regmap		*rtc_regmap;
+
+	const struct max77686_rtc_driver_data *drv_data;
+	struct regmap_irq_chip_data *rtc_irq_data;
+
+	int rtc_irq;
+	int virq;
+	int rtc_24hr_mode;
+};
+
+enum MAX77686_RTC_OP {
+	MAX77686_RTC_WRITE,
+	MAX77686_RTC_READ,
+};
+
+/* These are not registers but just offsets that are mapped to addresses */
+enum max77686_rtc_reg_offset {
+	REG_RTC_CONTROLM = 0,
+	REG_RTC_CONTROL,
+	REG_RTC_UPDATE0,
+	REG_WTSR_SMPL_CNTL,
+	REG_RTC_SEC,
+	REG_RTC_MIN,
+	REG_RTC_HOUR,
+	REG_RTC_WEEKDAY,
+	REG_RTC_MONTH,
+	REG_RTC_YEAR,
+	REG_RTC_DATE,
+	REG_ALARM1_SEC,
+	REG_ALARM1_MIN,
+	REG_ALARM1_HOUR,
+	REG_ALARM1_WEEKDAY,
+	REG_ALARM1_MONTH,
+	REG_ALARM1_YEAR,
+	REG_ALARM1_DATE,
+	REG_ALARM2_SEC,
+	REG_ALARM2_MIN,
+	REG_ALARM2_HOUR,
+	REG_ALARM2_WEEKDAY,
+	REG_ALARM2_MONTH,
+	REG_ALARM2_YEAR,
+	REG_ALARM2_DATE,
+	REG_RTC_AE1,
+	REG_RTC_END,
+};
+
+/* Maps RTC registers offset to the MAX77686 register addresses */
+static const unsigned int max77686_map[REG_RTC_END] = {
+	[REG_RTC_CONTROLM]   = MAX77686_RTC_CONTROLM,
+	[REG_RTC_CONTROL]    = MAX77686_RTC_CONTROL,
+	[REG_RTC_UPDATE0]    = MAX77686_RTC_UPDATE0,
+	[REG_WTSR_SMPL_CNTL] = MAX77686_WTSR_SMPL_CNTL,
+	[REG_RTC_SEC]        = MAX77686_RTC_SEC,
+	[REG_RTC_MIN]        = MAX77686_RTC_MIN,
+	[REG_RTC_HOUR]       = MAX77686_RTC_HOUR,
+	[REG_RTC_WEEKDAY]    = MAX77686_RTC_WEEKDAY,
+	[REG_RTC_MONTH]      = MAX77686_RTC_MONTH,
+	[REG_RTC_YEAR]       = MAX77686_RTC_YEAR,
+	[REG_RTC_DATE]       = MAX77686_RTC_DATE,
+	[REG_ALARM1_SEC]     = MAX77686_ALARM1_SEC,
+	[REG_ALARM1_MIN]     = MAX77686_ALARM1_MIN,
+	[REG_ALARM1_HOUR]    = MAX77686_ALARM1_HOUR,
+	[REG_ALARM1_WEEKDAY] = MAX77686_ALARM1_WEEKDAY,
+	[REG_ALARM1_MONTH]   = MAX77686_ALARM1_MONTH,
+	[REG_ALARM1_YEAR]    = MAX77686_ALARM1_YEAR,
+	[REG_ALARM1_DATE]    = MAX77686_ALARM1_DATE,
+	[REG_ALARM2_SEC]     = MAX77686_ALARM2_SEC,
+	[REG_ALARM2_MIN]     = MAX77686_ALARM2_MIN,
+	[REG_ALARM2_HOUR]    = MAX77686_ALARM2_HOUR,
+	[REG_ALARM2_WEEKDAY] = MAX77686_ALARM2_WEEKDAY,
+	[REG_ALARM2_MONTH]   = MAX77686_ALARM2_MONTH,
+	[REG_ALARM2_YEAR]    = MAX77686_ALARM2_YEAR,
+	[REG_ALARM2_DATE]    = MAX77686_ALARM2_DATE,
+	[REG_RTC_AE1]	     = REG_RTC_NONE,
+};
+
+static const struct regmap_irq max77686_rtc_irqs[] = {
+	/* RTC interrupts */
+	REGMAP_IRQ_REG(0, 0, MAX77686_RTCINT_RTC60S_MSK),
+	REGMAP_IRQ_REG(1, 0, MAX77686_RTCINT_RTCA1_MSK),
+	REGMAP_IRQ_REG(2, 0, MAX77686_RTCINT_RTCA2_MSK),
+	REGMAP_IRQ_REG(3, 0, MAX77686_RTCINT_SMPL_MSK),
+	REGMAP_IRQ_REG(4, 0, MAX77686_RTCINT_RTC1S_MSK),
+	REGMAP_IRQ_REG(5, 0, MAX77686_RTCINT_WTSR_MSK),
+};
+
+static const struct regmap_irq_chip max77686_rtc_irq_chip = {
+	.name		= "max77686-rtc",
+	.status_base	= MAX77686_RTC_INT,
+	.mask_base	= MAX77686_RTC_INTM,
+	.num_regs	= 1,
+	.irqs		= max77686_rtc_irqs,
+	.num_irqs	= ARRAY_SIZE(max77686_rtc_irqs),
+};
+
+static const struct max77686_rtc_driver_data max77686_drv_data = {
+	.delay = 16000,
+	.mask  = 0x7f,
+	.map   = max77686_map,
+	.alarm_enable_reg  = false,
+	.rtc_irq_from_platform = false,
+	.alarm_pending_status_reg = MAX77686_REG_STATUS2,
+	.rtc_i2c_addr = MAX77686_I2C_ADDR_RTC,
+	.rtc_irq_chip = &max77686_rtc_irq_chip,
+};
+
+static const struct max77686_rtc_driver_data max77620_drv_data = {
+	.delay = 16000,
+	.mask  = 0x7f,
+	.map   = max77686_map,
+	.alarm_enable_reg  = false,
+	.rtc_irq_from_platform = true,
+	.alarm_pending_status_reg = MAX77686_INVALID_REG,
+	.rtc_i2c_addr = MAX77620_I2C_ADDR_RTC,
+	.rtc_irq_chip = &max77686_rtc_irq_chip,
+};
+
+static const unsigned int max77802_map[REG_RTC_END] = {
+	[REG_RTC_CONTROLM]   = MAX77802_RTC_CONTROLM,
+	[REG_RTC_CONTROL]    = MAX77802_RTC_CONTROL,
+	[REG_RTC_UPDATE0]    = MAX77802_RTC_UPDATE0,
+	[REG_WTSR_SMPL_CNTL] = MAX77802_WTSR_SMPL_CNTL,
+	[REG_RTC_SEC]        = MAX77802_RTC_SEC,
+	[REG_RTC_MIN]        = MAX77802_RTC_MIN,
+	[REG_RTC_HOUR]       = MAX77802_RTC_HOUR,
+	[REG_RTC_WEEKDAY]    = MAX77802_RTC_WEEKDAY,
+	[REG_RTC_MONTH]      = MAX77802_RTC_MONTH,
+	[REG_RTC_YEAR]       = MAX77802_RTC_YEAR,
+	[REG_RTC_DATE]       = MAX77802_RTC_DATE,
+	[REG_ALARM1_SEC]     = MAX77802_ALARM1_SEC,
+	[REG_ALARM1_MIN]     = MAX77802_ALARM1_MIN,
+	[REG_ALARM1_HOUR]    = MAX77802_ALARM1_HOUR,
+	[REG_ALARM1_WEEKDAY] = MAX77802_ALARM1_WEEKDAY,
+	[REG_ALARM1_MONTH]   = MAX77802_ALARM1_MONTH,
+	[REG_ALARM1_YEAR]    = MAX77802_ALARM1_YEAR,
+	[REG_ALARM1_DATE]    = MAX77802_ALARM1_DATE,
+	[REG_ALARM2_SEC]     = MAX77802_ALARM2_SEC,
+	[REG_ALARM2_MIN]     = MAX77802_ALARM2_MIN,
+	[REG_ALARM2_HOUR]    = MAX77802_ALARM2_HOUR,
+	[REG_ALARM2_WEEKDAY] = MAX77802_ALARM2_WEEKDAY,
+	[REG_ALARM2_MONTH]   = MAX77802_ALARM2_MONTH,
+	[REG_ALARM2_YEAR]    = MAX77802_ALARM2_YEAR,
+	[REG_ALARM2_DATE]    = MAX77802_ALARM2_DATE,
+	[REG_RTC_AE1]	     = MAX77802_RTC_AE1,
+};
+
+static const struct regmap_irq_chip max77802_rtc_irq_chip = {
+	.name		= "max77802-rtc",
+	.status_base	= MAX77802_RTC_INT,
+	.mask_base	= MAX77802_RTC_INTM,
+	.num_regs	= 1,
+	.irqs		= max77686_rtc_irqs, /* same masks as 77686 */
+	.num_irqs	= ARRAY_SIZE(max77686_rtc_irqs),
+};
+
+static const struct max77686_rtc_driver_data max77802_drv_data = {
+	.delay = 200,
+	.mask  = 0xff,
+	.map   = max77802_map,
+	.alarm_enable_reg  = true,
+	.rtc_irq_from_platform = false,
+	.alarm_pending_status_reg = MAX77686_REG_STATUS2,
+	.rtc_i2c_addr = MAX77686_INVALID_I2C_ADDR,
+	.rtc_irq_chip = &max77802_rtc_irq_chip,
+};
+
+static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
+				    struct max77686_rtc_info *info)
+{
+	u8 mask = info->drv_data->mask;
+
+	tm->tm_sec = data[RTC_SEC] & mask;
+	tm->tm_min = data[RTC_MIN] & mask;
+	if (info->rtc_24hr_mode) {
+		tm->tm_hour = data[RTC_HOUR] & 0x1f;
+	} else {
+		tm->tm_hour = data[RTC_HOUR] & 0x0f;
+		if (data[RTC_HOUR] & HOUR_PM_MASK)
+			tm->tm_hour += 12;
+	}
+
+	/* Only a single bit is set in data[], so fls() would be equivalent */
+	tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1;
+	tm->tm_mday = data[RTC_DATE] & 0x1f;
+	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
+	tm->tm_year = data[RTC_YEAR] & mask;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+
+	/*
+	 * MAX77686 uses 1 bit from sec/min/hour/etc RTC registers and the
+	 * year values are just 0..99 so add 100 to support up to 2099.
+	 */
+	if (!info->drv_data->alarm_enable_reg)
+		tm->tm_year += 100;
+}
+
+static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data,
+				   struct max77686_rtc_info *info)
+{
+	data[RTC_SEC] = tm->tm_sec;
+	data[RTC_MIN] = tm->tm_min;
+	data[RTC_HOUR] = tm->tm_hour;
+	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
+	data[RTC_DATE] = tm->tm_mday;
+	data[RTC_MONTH] = tm->tm_mon + 1;
+
+	if (info->drv_data->alarm_enable_reg) {
+		data[RTC_YEAR] = tm->tm_year;
+		return 0;
+	}
+
+	data[RTC_YEAR] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
+
+	if (tm->tm_year < 100) {
+		dev_err(info->dev, "RTC cannot handle the year %d.\n",
+			1900 + tm->tm_year);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77686_rtc_update(struct max77686_rtc_info *info,
+			       enum MAX77686_RTC_OP op)
+{
+	int ret;
+	unsigned int data;
+	unsigned long delay = info->drv_data->delay;
+
+	if (op == MAX77686_RTC_WRITE)
+		data = 1 << RTC_UDR_SHIFT;
+	else
+		data = 1 << RTC_RBUDR_SHIFT;
+
+	ret = regmap_update_bits(info->rtc_regmap,
+				 info->drv_data->map[REG_RTC_UPDATE0],
+				 data, data);
+	if (ret < 0)
+		dev_err(info->dev, "Fail to write update reg(ret=%d, data=0x%x)\n",
+			ret, data);
+	else {
+		/* Minimum delay required before RTC update. */
+		usleep_range(delay, delay * 2);
+	}
+
+	return ret;
+}
+
+static int max77686_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max77686_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_READ);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_bulk_read(info->rtc_regmap,
+			       info->drv_data->map[REG_RTC_SEC],
+			       data, ARRAY_SIZE(data));
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to read time reg(%d)\n", ret);
+		goto out;
+	}
+
+	max77686_rtc_data_to_tm(data, tm, info);
+
+	ret = rtc_valid_tm(tm);
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max77686_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max77686_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max77686_rtc_tm_to_data(tm, data, info);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+
+	ret = regmap_bulk_write(info->rtc_regmap,
+				info->drv_data->map[REG_RTC_SEC],
+				data, ARRAY_SIZE(data));
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to write time reg(%d)\n", ret);
+		goto out;
+	}
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_WRITE);
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max77686_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	unsigned int val;
+	const unsigned int *map = info->drv_data->map;
+	int i, ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_READ);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+			       data, ARRAY_SIZE(data));
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
+		goto out;
+	}
+
+	max77686_rtc_data_to_tm(data, &alrm->time, info);
+
+	alrm->enabled = 0;
+
+	if (info->drv_data->alarm_enable_reg) {
+		if (map[REG_RTC_AE1] == REG_RTC_NONE) {
+			ret = -EINVAL;
+			dev_err(info->dev,
+				"alarm enable register not set(%d)\n", ret);
+			goto out;
+		}
+
+		ret = regmap_read(info->rtc_regmap, map[REG_RTC_AE1], &val);
+		if (ret < 0) {
+			dev_err(info->dev,
+				"fail to read alarm enable(%d)\n", ret);
+			goto out;
+		}
+
+		if (val)
+			alrm->enabled = 1;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(data); i++) {
+			if (data[i] & ALARM_ENABLE_MASK) {
+				alrm->enabled = 1;
+				break;
+			}
+		}
+	}
+
+	alrm->pending = 0;
+
+	if (info->drv_data->alarm_pending_status_reg == MAX77686_INVALID_REG)
+		goto out;
+
+	ret = regmap_read(info->regmap,
+			  info->drv_data->alarm_pending_status_reg, &val);
+	if (ret < 0) {
+		dev_err(info->dev,
+			"Fail to read alarm pending status reg(%d)\n", ret);
+		goto out;
+	}
+
+	if (val & (1 << 4)) /* RTCA1 */
+		alrm->pending = 1;
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret, i;
+	struct rtc_time tm;
+	const unsigned int *map = info->drv_data->map;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_READ);
+	if (ret < 0)
+		goto out;
+
+	if (info->drv_data->alarm_enable_reg) {
+		if (map[REG_RTC_AE1] == REG_RTC_NONE) {
+			ret = -EINVAL;
+			dev_err(info->dev,
+				"alarm enable register not set(%d)\n", ret);
+			goto out;
+		}
+
+		ret = regmap_write(info->rtc_regmap, map[REG_RTC_AE1], 0);
+	} else {
+		ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+				       data, ARRAY_SIZE(data));
+		if (ret < 0) {
+			dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
+			goto out;
+		}
+
+		max77686_rtc_data_to_tm(data, &tm, info);
+
+		for (i = 0; i < ARRAY_SIZE(data); i++)
+			data[i] &= ~ALARM_ENABLE_MASK;
+
+		ret = regmap_bulk_write(info->rtc_regmap, map[REG_ALARM1_SEC],
+					data, ARRAY_SIZE(data));
+	}
+
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
+		goto out;
+	}
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_WRITE);
+out:
+	return ret;
+}
+
+static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret;
+	struct rtc_time tm;
+	const unsigned int *map = info->drv_data->map;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_READ);
+	if (ret < 0)
+		goto out;
+
+	if (info->drv_data->alarm_enable_reg) {
+		ret = regmap_write(info->rtc_regmap, map[REG_RTC_AE1],
+				   MAX77802_ALARM_ENABLE_VALUE);
+	} else {
+		ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+				       data, ARRAY_SIZE(data));
+		if (ret < 0) {
+			dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
+			goto out;
+		}
+
+		max77686_rtc_data_to_tm(data, &tm, info);
+
+		data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
+		data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
+		data[RTC_HOUR] |= (1 << ALARM_ENABLE_SHIFT);
+		data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
+		if (data[RTC_MONTH] & 0xf)
+			data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
+		if (data[RTC_YEAR] & info->drv_data->mask)
+			data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
+		if (data[RTC_DATE] & 0x1f)
+			data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
+
+		ret = regmap_bulk_write(info->rtc_regmap, map[REG_ALARM1_SEC],
+					data, ARRAY_SIZE(data));
+	}
+
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
+		goto out;
+	}
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_WRITE);
+out:
+	return ret;
+}
+
+static int max77686_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max77686_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max77686_rtc_tm_to_data(&alrm->time, data, info);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max77686_rtc_stop_alarm(info);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_bulk_write(info->rtc_regmap,
+				info->drv_data->map[REG_ALARM1_SEC],
+				data, ARRAY_SIZE(data));
+
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
+		goto out;
+	}
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_WRITE);
+	if (ret < 0)
+		goto out;
+
+	if (alrm->enabled)
+		ret = max77686_rtc_start_alarm(info);
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max77686_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct max77686_rtc_info *info = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&info->lock);
+	if (enabled)
+		ret = max77686_rtc_start_alarm(info);
+	else
+		ret = max77686_rtc_stop_alarm(info);
+	mutex_unlock(&info->lock);
+
+	return ret;
+}
+
+static irqreturn_t max77686_rtc_alarm_irq(int irq, void *data)
+{
+	struct max77686_rtc_info *info = data;
+
+	dev_dbg(info->dev, "RTC alarm IRQ: %d\n", irq);
+
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops max77686_rtc_ops = {
+	.read_time = max77686_rtc_read_time,
+	.set_time = max77686_rtc_set_time,
+	.read_alarm = max77686_rtc_read_alarm,
+	.set_alarm = max77686_rtc_set_alarm,
+	.alarm_irq_enable = max77686_rtc_alarm_irq_enable,
+};
+
+static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
+{
+	u8 data[2];
+	int ret;
+
+	/* Set RTC control register : Binary mode, 24hour mdoe */
+	data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+	data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+
+	info->rtc_24hr_mode = 1;
+
+	ret = regmap_bulk_write(info->rtc_regmap,
+				info->drv_data->map[REG_RTC_CONTROLM],
+				data, ARRAY_SIZE(data));
+	if (ret < 0) {
+		dev_err(info->dev, "Fail to write controlm reg(%d)\n", ret);
+		return ret;
+	}
+
+	ret = max77686_rtc_update(info, MAX77686_RTC_WRITE);
+	return ret;
+}
+
+static const struct regmap_config max77686_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
+{
+	struct device *parent = info->dev->parent;
+	struct i2c_client *parent_i2c = to_i2c_client(parent);
+	int ret;
+
+	if (info->drv_data->rtc_irq_from_platform) {
+		struct platform_device *pdev = to_platform_device(info->dev);
+
+		info->rtc_irq = platform_get_irq(pdev, 0);
+		if (info->rtc_irq < 0) {
+			dev_err(info->dev, "Failed to get rtc interrupts: %d\n",
+				info->rtc_irq);
+			return info->rtc_irq;
+		}
+	} else {
+		info->rtc_irq =  parent_i2c->irq;
+	}
+
+	info->regmap = dev_get_regmap(parent, NULL);
+	if (!info->regmap) {
+		dev_err(info->dev, "Failed to get rtc regmap\n");
+		return -ENODEV;
+	}
+
+	if (info->drv_data->rtc_i2c_addr == MAX77686_INVALID_I2C_ADDR) {
+		info->rtc_regmap = info->regmap;
+		goto add_rtc_irq;
+	}
+
+	info->rtc = i2c_new_dummy(parent_i2c->adapter,
+				  info->drv_data->rtc_i2c_addr);
+	if (!info->rtc) {
+		dev_err(info->dev, "Failed to allocate I2C device for RTC\n");
+		return -ENODEV;
+	}
+
+	info->rtc_regmap = devm_regmap_init_i2c(info->rtc,
+						&max77686_rtc_regmap_config);
+	if (IS_ERR(info->rtc_regmap)) {
+		ret = PTR_ERR(info->rtc_regmap);
+		dev_err(info->dev, "Failed to allocate RTC regmap: %d\n", ret);
+		goto err_unregister_i2c;
+	}
+
+add_rtc_irq:
+	ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
+				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+				  IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+				  &info->rtc_irq_data);
+	if (ret < 0) {
+		dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
+		goto err_unregister_i2c;
+	}
+
+	return 0;
+
+err_unregister_i2c:
+	if (info->rtc)
+		i2c_unregister_device(info->rtc);
+	return ret;
+}
+
+static int max77686_rtc_probe(struct platform_device *pdev)
+{
+	struct max77686_rtc_info *info;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max77686_rtc_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->lock);
+	info->dev = &pdev->dev;
+	info->drv_data = (const struct max77686_rtc_driver_data *)
+		id->driver_data;
+
+	ret = max77686_init_rtc_regmap(info);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = max77686_rtc_init_reg(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
+		goto err_rtc;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, id->name,
+					&max77686_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		goto err_rtc;
+	}
+
+	info->virq = regmap_irq_get_virq(info->rtc_irq_data,
+					 MAX77686_RTCIRQ_RTCA1);
+	if (info->virq <= 0) {
+		ret = -ENXIO;
+		goto err_rtc;
+	}
+
+	ret = request_threaded_irq(info->virq, NULL, max77686_rtc_alarm_irq, 0,
+				   "rtc-alarm1", info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			info->virq, ret);
+		goto err_rtc;
+	}
+
+	return 0;
+
+err_rtc:
+	regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
+	if (info->rtc)
+		i2c_unregister_device(info->rtc);
+
+	return ret;
+}
+
+static int max77686_rtc_remove(struct platform_device *pdev)
+{
+	struct max77686_rtc_info *info = platform_get_drvdata(pdev);
+
+	free_irq(info->virq, info);
+	regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
+	if (info->rtc)
+		i2c_unregister_device(info->rtc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77686_rtc_suspend(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return enable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+
+static int max77686_rtc_resume(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return disable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
+			 max77686_rtc_suspend, max77686_rtc_resume);
+
+static const struct platform_device_id rtc_id[] = {
+	{ "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, },
+	{ "max77802-rtc", .driver_data = (kernel_ulong_t)&max77802_drv_data, },
+	{ "max77620-rtc", .driver_data = (kernel_ulong_t)&max77620_drv_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, rtc_id);
+
+static struct platform_driver max77686_rtc_driver = {
+	.driver		= {
+		.name	= "max77686-rtc",
+		.pm	= &max77686_rtc_pm_ops,
+	},
+	.probe		= max77686_rtc_probe,
+	.remove		= max77686_rtc_remove,
+	.id_table	= rtc_id,
+};
+
+module_platform_driver(max77686_rtc_driver);
+
+MODULE_DESCRIPTION("Maxim MAX77686 RTC driver");
+MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max8907.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8907.c
new file mode 100644
index 0000000..19c29b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8907.c
@@ -0,0 +1,224 @@
+/*
+ * RTC driver for Maxim MAX8907
+ *
+ * Copyright (c) 2011-2012, NVIDIA Corporation.
+ *
+ * Based on drivers/rtc/rtc-max8925.c,
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_DATE,
+	RTC_MONTH,
+	RTC_YEAR1,
+	RTC_YEAR2,
+};
+
+#define TIME_NUM			8
+#define ALARM_1SEC			(1 << 7)
+#define HOUR_12				(1 << 7)
+#define HOUR_AM_PM			(1 << 5)
+#define ALARM0_IRQ			(1 << 3)
+#define ALARM1_IRQ			(1 << 2)
+#define ALARM0_STATUS			(1 << 2)
+#define ALARM1_STATUS			(1 << 1)
+
+struct max8907_rtc {
+	struct max8907		*max8907;
+	struct regmap		*regmap;
+	struct rtc_device	*rtc_dev;
+	int			irq;
+};
+
+static irqreturn_t max8907_irq_handler(int irq, void *data)
+{
+	struct max8907_rtc *rtc = data;
+
+	regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static void regs_to_tm(u8 *regs, struct rtc_time *tm)
+{
+	tm->tm_year = bcd2bin(regs[RTC_YEAR2]) * 100 +
+		bcd2bin(regs[RTC_YEAR1]) - 1900;
+	tm->tm_mon = bcd2bin(regs[RTC_MONTH] & 0x1f) - 1;
+	tm->tm_mday = bcd2bin(regs[RTC_DATE] & 0x3f);
+	tm->tm_wday = (regs[RTC_WEEKDAY] & 0x07);
+	if (regs[RTC_HOUR] & HOUR_12) {
+		tm->tm_hour = bcd2bin(regs[RTC_HOUR] & 0x01f);
+		if (tm->tm_hour == 12)
+			tm->tm_hour = 0;
+		if (regs[RTC_HOUR] & HOUR_AM_PM)
+			tm->tm_hour += 12;
+	} else {
+		tm->tm_hour = bcd2bin(regs[RTC_HOUR] & 0x03f);
+	}
+	tm->tm_min = bcd2bin(regs[RTC_MIN] & 0x7f);
+	tm->tm_sec = bcd2bin(regs[RTC_SEC] & 0x7f);
+}
+
+static void tm_to_regs(struct rtc_time *tm, u8 *regs)
+{
+	u8 high, low;
+
+	high = (tm->tm_year + 1900) / 100;
+	low = tm->tm_year % 100;
+	regs[RTC_YEAR2] = bin2bcd(high);
+	regs[RTC_YEAR1] = bin2bcd(low);
+	regs[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
+	regs[RTC_DATE] = bin2bcd(tm->tm_mday);
+	regs[RTC_WEEKDAY] = tm->tm_wday;
+	regs[RTC_HOUR] = bin2bcd(tm->tm_hour);
+	regs[RTC_MIN] = bin2bcd(tm->tm_min);
+	regs[RTC_SEC] = bin2bcd(tm->tm_sec);
+}
+
+static int max8907_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8907_rtc *rtc = dev_get_drvdata(dev);
+	u8 regs[TIME_NUM];
+	int ret;
+
+	ret = regmap_bulk_read(rtc->regmap, MAX8907_REG_RTC_SEC, regs,
+			       TIME_NUM);
+	if (ret < 0)
+		return ret;
+
+	regs_to_tm(regs, tm);
+
+	return 0;
+}
+
+static int max8907_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8907_rtc *rtc = dev_get_drvdata(dev);
+	u8 regs[TIME_NUM];
+
+	tm_to_regs(tm, regs);
+
+	return regmap_bulk_write(rtc->regmap, MAX8907_REG_RTC_SEC, regs,
+				 TIME_NUM);
+}
+
+static int max8907_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8907_rtc *rtc = dev_get_drvdata(dev);
+	u8 regs[TIME_NUM];
+	unsigned int val;
+	int ret;
+
+	ret = regmap_bulk_read(rtc->regmap, MAX8907_REG_ALARM0_SEC, regs,
+			       TIME_NUM);
+	if (ret < 0)
+		return ret;
+
+	regs_to_tm(regs, &alrm->time);
+
+	ret = regmap_read(rtc->regmap, MAX8907_REG_ALARM0_CNTL, &val);
+	if (ret < 0)
+		return ret;
+
+	alrm->enabled = !!(val & 0x7f);
+
+	return 0;
+}
+
+static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8907_rtc *rtc = dev_get_drvdata(dev);
+	u8 regs[TIME_NUM];
+	int ret;
+
+	tm_to_regs(&alrm->time, regs);
+
+	/* Disable alarm while we update the target time */
+	ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_write(rtc->regmap, MAX8907_REG_ALARM0_SEC, regs,
+				TIME_NUM);
+	if (ret < 0)
+		return ret;
+
+	if (alrm->enabled)
+		ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x77);
+
+	return ret;
+}
+
+static const struct rtc_class_ops max8907_rtc_ops = {
+	.read_time	= max8907_rtc_read_time,
+	.set_time	= max8907_rtc_set_time,
+	.read_alarm	= max8907_rtc_read_alarm,
+	.set_alarm	= max8907_rtc_set_alarm,
+};
+
+static int max8907_rtc_probe(struct platform_device *pdev)
+{
+	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
+	struct max8907_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->max8907 = max8907;
+	rtc->regmap = max8907->regmap_rtc;
+
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, "max8907-rtc",
+					&max8907_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		return ret;
+	}
+
+	rtc->irq = regmap_irq_get_virq(max8907->irqc_rtc,
+				       MAX8907_IRQ_RTC_ALARM0);
+	if (rtc->irq < 0)
+		return rtc->irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+				max8907_irq_handler,
+				IRQF_ONESHOT, "max8907-alarm0", rtc);
+	if (ret < 0)
+		dev_err(&pdev->dev, "Failed to request IRQ%d: %d\n",
+			rtc->irq, ret);
+
+	return ret;
+}
+
+static struct platform_driver max8907_rtc_driver = {
+	.driver = {
+		.name = "max8907-rtc",
+	},
+	.probe = max8907_rtc_probe,
+};
+module_platform_driver(max8907_rtc_driver);
+
+MODULE_DESCRIPTION("Maxim MAX8907 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max8925.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8925.c
new file mode 100644
index 0000000..67d6fc2
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8925.c
@@ -0,0 +1,325 @@
+/*
+ * RTC driver for Maxim MAX8925
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max8925.h>
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_DATE,
+	RTC_MONTH,
+	RTC_YEAR1,
+	RTC_YEAR2,
+};
+
+#define MAX8925_RTC_SEC			0x00
+#define MAX8925_RTC_MIN			0x01
+#define MAX8925_RTC_HOUR		0x02
+#define MAX8925_RTC_WEEKDAY		0x03
+#define MAX8925_RTC_DATE		0x04
+#define MAX8925_RTC_MONTH		0x05
+#define MAX8925_RTC_YEAR1		0x06
+#define MAX8925_RTC_YEAR2		0x07
+#define MAX8925_ALARM0_SEC		0x08
+#define MAX8925_ALARM0_MIN		0x09
+#define MAX8925_ALARM0_HOUR		0x0a
+#define MAX8925_ALARM0_WEEKDAY		0x0b
+#define MAX8925_ALARM0_DATE		0x0c
+#define MAX8925_ALARM0_MON		0x0d
+#define MAX8925_ALARM0_YEAR1		0x0e
+#define MAX8925_ALARM0_YEAR2		0x0f
+#define MAX8925_ALARM1_SEC		0x10
+#define MAX8925_ALARM1_MIN		0x11
+#define MAX8925_ALARM1_HOUR		0x12
+#define MAX8925_ALARM1_WEEKDAY		0x13
+#define MAX8925_ALARM1_DATE		0x14
+#define MAX8925_ALARM1_MON		0x15
+#define MAX8925_ALARM1_YEAR1		0x16
+#define MAX8925_ALARM1_YEAR2		0x17
+#define MAX8925_RTC_CNTL		0x1b
+#define MAX8925_RTC_STATUS		0x20
+
+#define TIME_NUM			8
+#define ALARM_1SEC			(1 << 7)
+#define HOUR_12				(1 << 7)
+#define HOUR_AM_PM			(1 << 5)
+#define ALARM0_IRQ			(1 << 3)
+#define ALARM1_IRQ			(1 << 2)
+#define ALARM0_STATUS			(1 << 2)
+#define ALARM1_STATUS			(1 << 1)
+
+
+struct max8925_rtc_info {
+	struct rtc_device	*rtc_dev;
+	struct max8925_chip	*chip;
+	struct i2c_client	*rtc;
+	struct device		*dev;
+	int			irq;
+};
+
+static irqreturn_t rtc_update_handler(int irq, void *data)
+{
+	struct max8925_rtc_info *info = (struct max8925_rtc_info *)data;
+
+	/* disable ALARM0 except for 1SEC alarm */
+	max8925_set_bits(info->rtc, MAX8925_ALARM0_CNTL, 0x7f, 0);
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int tm_calc(struct rtc_time *tm, unsigned char *buf, int len)
+{
+	if (len < TIME_NUM)
+		return -EINVAL;
+	tm->tm_year = (buf[RTC_YEAR2] >> 4) * 1000
+			+ (buf[RTC_YEAR2] & 0xf) * 100
+			+ (buf[RTC_YEAR1] >> 4) * 10
+			+ (buf[RTC_YEAR1] & 0xf);
+	tm->tm_year -= 1900;
+	tm->tm_mon = ((buf[RTC_MONTH] >> 4) & 0x01) * 10
+			+ (buf[RTC_MONTH] & 0x0f);
+	tm->tm_mday = ((buf[RTC_DATE] >> 4) & 0x03) * 10
+			+ (buf[RTC_DATE] & 0x0f);
+	tm->tm_wday = buf[RTC_WEEKDAY] & 0x07;
+	if (buf[RTC_HOUR] & HOUR_12) {
+		tm->tm_hour = ((buf[RTC_HOUR] >> 4) & 0x1) * 10
+				+ (buf[RTC_HOUR] & 0x0f);
+		if (buf[RTC_HOUR] & HOUR_AM_PM)
+			tm->tm_hour += 12;
+	} else
+		tm->tm_hour = ((buf[RTC_HOUR] >> 4) & 0x03) * 10
+				+ (buf[RTC_HOUR] & 0x0f);
+	tm->tm_min = ((buf[RTC_MIN] >> 4) & 0x7) * 10
+			+ (buf[RTC_MIN] & 0x0f);
+	tm->tm_sec = ((buf[RTC_SEC] >> 4) & 0x7) * 10
+			+ (buf[RTC_SEC] & 0x0f);
+	return 0;
+}
+
+static int data_calc(unsigned char *buf, struct rtc_time *tm, int len)
+{
+	unsigned char high, low;
+
+	if (len < TIME_NUM)
+		return -EINVAL;
+
+	high = (tm->tm_year + 1900) / 1000;
+	low = (tm->tm_year + 1900) / 100;
+	low = low - high * 10;
+	buf[RTC_YEAR2] = (high << 4) + low;
+	high = (tm->tm_year + 1900) / 10;
+	low = tm->tm_year + 1900;
+	low = low - high * 10;
+	high = high - (high / 10) * 10;
+	buf[RTC_YEAR1] = (high << 4) + low;
+	high = tm->tm_mon / 10;
+	low = tm->tm_mon;
+	low = low - high * 10;
+	buf[RTC_MONTH] = (high << 4) + low;
+	high = tm->tm_mday / 10;
+	low = tm->tm_mday;
+	low = low - high * 10;
+	buf[RTC_DATE] = (high << 4) + low;
+	buf[RTC_WEEKDAY] = tm->tm_wday;
+	high = tm->tm_hour / 10;
+	low = tm->tm_hour;
+	low = low - high * 10;
+	buf[RTC_HOUR] = (high << 4) + low;
+	high = tm->tm_min / 10;
+	low = tm->tm_min;
+	low = low - high * 10;
+	buf[RTC_MIN] = (high << 4) + low;
+	high = tm->tm_sec / 10;
+	low = tm->tm_sec;
+	low = low - high * 10;
+	buf[RTC_SEC] = (high << 4) + low;
+	return 0;
+}
+
+static int max8925_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8925_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[TIME_NUM];
+	int ret;
+
+	ret = max8925_bulk_read(info->rtc, MAX8925_RTC_SEC, TIME_NUM, buf);
+	if (ret < 0)
+		goto out;
+	ret = tm_calc(tm, buf, TIME_NUM);
+out:
+	return ret;
+}
+
+static int max8925_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8925_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[TIME_NUM];
+	int ret;
+
+	ret = data_calc(buf, tm, TIME_NUM);
+	if (ret < 0)
+		goto out;
+	ret = max8925_bulk_write(info->rtc, MAX8925_RTC_SEC, TIME_NUM, buf);
+out:
+	return ret;
+}
+
+static int max8925_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8925_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[TIME_NUM];
+	int ret;
+
+	ret = max8925_bulk_read(info->rtc, MAX8925_ALARM0_SEC, TIME_NUM, buf);
+	if (ret < 0)
+		goto out;
+	ret = tm_calc(&alrm->time, buf, TIME_NUM);
+	if (ret < 0)
+		goto out;
+	ret = max8925_reg_read(info->rtc, MAX8925_RTC_IRQ_MASK);
+	if (ret < 0)
+		goto out;
+	if (ret & ALARM0_IRQ) {
+		alrm->enabled = 0;
+	} else {
+		ret = max8925_reg_read(info->rtc, MAX8925_ALARM0_CNTL);
+		if (ret < 0)
+			goto out;
+		if (!ret)
+			alrm->enabled = 0;
+		else
+			alrm->enabled = 1;
+	}
+	ret = max8925_reg_read(info->rtc, MAX8925_RTC_STATUS);
+	if (ret < 0)
+		goto out;
+	if (ret & ALARM0_STATUS)
+		alrm->pending = 1;
+	else
+		alrm->pending = 0;
+	return 0;
+out:
+	return ret;
+}
+
+static int max8925_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8925_rtc_info *info = dev_get_drvdata(dev);
+	unsigned char buf[TIME_NUM];
+	int ret;
+
+	ret = data_calc(buf, &alrm->time, TIME_NUM);
+	if (ret < 0)
+		goto out;
+	ret = max8925_bulk_write(info->rtc, MAX8925_ALARM0_SEC, TIME_NUM, buf);
+	if (ret < 0)
+		goto out;
+	if (alrm->enabled)
+		/* only enable alarm on year/month/day/hour/min/sec */
+		ret = max8925_reg_write(info->rtc, MAX8925_ALARM0_CNTL, 0x77);
+	else
+		ret = max8925_reg_write(info->rtc, MAX8925_ALARM0_CNTL, 0x0);
+out:
+	return ret;
+}
+
+static const struct rtc_class_ops max8925_rtc_ops = {
+	.read_time	= max8925_rtc_read_time,
+	.set_time	= max8925_rtc_set_time,
+	.read_alarm	= max8925_rtc_read_alarm,
+	.set_alarm	= max8925_rtc_set_alarm,
+};
+
+static int max8925_rtc_probe(struct platform_device *pdev)
+{
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct max8925_rtc_info *info;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_rtc_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->chip = chip;
+	info->rtc = chip->rtc;
+	info->dev = &pdev->dev;
+	info->irq = platform_get_irq(pdev, 0);
+
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					rtc_update_handler, IRQF_ONESHOT,
+					"rtc-alarm0", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	dev_set_drvdata(&pdev->dev, info);
+	/* XXX - isn't this redundant? */
+	platform_set_drvdata(pdev, info);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max8925-rtc",
+					&max8925_rtc_ops, THIS_MODULE);
+	ret = PTR_ERR(info->rtc_dev);
+	if (IS_ERR(info->rtc_dev)) {
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max8925_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << MAX8925_IRQ_RTC_ALARM0;
+	return 0;
+}
+static int max8925_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << MAX8925_IRQ_RTC_ALARM0);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max8925_rtc_pm_ops, max8925_rtc_suspend, max8925_rtc_resume);
+
+static struct platform_driver max8925_rtc_driver = {
+	.driver		= {
+		.name	= "max8925-rtc",
+		.pm     = &max8925_rtc_pm_ops,
+	},
+	.probe		= max8925_rtc_probe,
+};
+
+module_platform_driver(max8925_rtc_driver);
+
+MODULE_DESCRIPTION("Maxim MAX8925 RTC driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
+
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max8997.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8997.c
new file mode 100644
index 0000000..4cce5bd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8997.c
@@ -0,0 +1,539 @@
+/*
+ * RTC driver for Maxim MAX8997
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ *
+ *  based on rtc-max8998.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/irqdomain.h>
+
+/* Module parameter for WTSR function control */
+static int wtsr_en = 1;
+module_param(wtsr_en, int, 0444);
+MODULE_PARM_DESC(wtsr_en, "Watchdog Timeout & Software Reset (default=on)");
+/* Module parameter for SMPL function control */
+static int smpl_en = 1;
+module_param(smpl_en, int, 0444);
+MODULE_PARM_DESC(smpl_en, "Sudden Momentary Power Loss (default=on)");
+
+/* RTC Control Register */
+#define BCD_EN_SHIFT			0
+#define BCD_EN_MASK			(1 << BCD_EN_SHIFT)
+#define MODEL24_SHIFT			1
+#define MODEL24_MASK			(1 << MODEL24_SHIFT)
+/* RTC Update Register1 */
+#define RTC_UDR_SHIFT			0
+#define RTC_UDR_MASK			(1 << RTC_UDR_SHIFT)
+/* WTSR and SMPL Register */
+#define WTSRT_SHIFT			0
+#define SMPLT_SHIFT			2
+#define WTSR_EN_SHIFT			6
+#define SMPL_EN_SHIFT			7
+#define WTSRT_MASK			(3 << WTSRT_SHIFT)
+#define SMPLT_MASK			(3 << SMPLT_SHIFT)
+#define WTSR_EN_MASK			(1 << WTSR_EN_SHIFT)
+#define SMPL_EN_MASK			(1 << SMPL_EN_SHIFT)
+/* RTC Hour register */
+#define HOUR_PM_SHIFT			6
+#define HOUR_PM_MASK			(1 << HOUR_PM_SHIFT)
+/* RTC Alarm Enable */
+#define ALARM_ENABLE_SHIFT		7
+#define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_MONTH,
+	RTC_YEAR,
+	RTC_DATE,
+	RTC_NR_TIME
+};
+
+struct max8997_rtc_info {
+	struct device		*dev;
+	struct max8997_dev	*max8997;
+	struct i2c_client	*rtc;
+	struct rtc_device	*rtc_dev;
+	struct mutex		lock;
+	int virq;
+	int rtc_24hr_mode;
+};
+
+static void max8997_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
+				   int rtc_24hr_mode)
+{
+	tm->tm_sec = data[RTC_SEC] & 0x7f;
+	tm->tm_min = data[RTC_MIN] & 0x7f;
+	if (rtc_24hr_mode)
+		tm->tm_hour = data[RTC_HOUR] & 0x1f;
+	else {
+		tm->tm_hour = data[RTC_HOUR] & 0x0f;
+		if (data[RTC_HOUR] & HOUR_PM_MASK)
+			tm->tm_hour += 12;
+	}
+
+	tm->tm_wday = fls(data[RTC_WEEKDAY] & 0x7f) - 1;
+	tm->tm_mday = data[RTC_DATE] & 0x1f;
+	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
+	tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+}
+
+static int max8997_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	data[RTC_SEC] = tm->tm_sec;
+	data[RTC_MIN] = tm->tm_min;
+	data[RTC_HOUR] = tm->tm_hour;
+	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
+	data[RTC_DATE] = tm->tm_mday;
+	data[RTC_MONTH] = tm->tm_mon + 1;
+	data[RTC_YEAR] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
+
+	if (tm->tm_year < 100) {
+		pr_warn("RTC cannot handle the year %d.  Assume it's 2000.\n",
+			1900 + tm->tm_year);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static inline int max8997_rtc_set_update_reg(struct max8997_rtc_info *info)
+{
+	int ret;
+
+	ret = max8997_write_reg(info->rtc, MAX8997_RTC_UPDATE1,
+						RTC_UDR_MASK);
+	if (ret < 0)
+		dev_err(info->dev, "%s: fail to write update reg(%d)\n",
+				__func__, ret);
+	else {
+		/* Minimum 16ms delay required before RTC update.
+		 * Otherwise, we may read and update based on out-of-date
+		 * value */
+		msleep(20);
+	}
+
+	return ret;
+}
+
+static int max8997_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
+	mutex_unlock(&info->lock);
+
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__,
+				ret);
+		return ret;
+	}
+
+	max8997_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
+
+	return rtc_valid_tm(tm);
+}
+
+static int max8997_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max8997_rtc_tm_to_data(tm, data);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
+				ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max8997_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	u8 val;
+	int i, ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+			data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
+				__func__, __LINE__, ret);
+		goto out;
+	}
+
+	max8997_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+
+	alrm->enabled = 0;
+	for (i = 0; i < RTC_NR_TIME; i++) {
+		if (data[i] & ALARM_ENABLE_MASK) {
+			alrm->enabled = 1;
+			break;
+		}
+	}
+
+	alrm->pending = 0;
+	ret = max8997_read_reg(info->max8997->i2c, MAX8997_REG_STATUS1, &val);
+	if (ret < 0) {
+		dev_err(info->dev, "%s:%d fail to read status1 reg(%d)\n",
+				__func__, __LINE__, ret);
+		goto out;
+	}
+
+	if (val & (1 << 4)) /* RTCA1 */
+		alrm->pending = 1;
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max8997_rtc_stop_alarm(struct max8997_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret, i;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	for (i = 0; i < RTC_NR_TIME; i++)
+		data[i] &= ~ALARM_ENABLE_MASK;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				 data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	return ret;
+}
+
+static int max8997_rtc_start_alarm(struct max8997_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_HOUR] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
+	if (data[RTC_MONTH] & 0xf)
+		data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
+	if (data[RTC_YEAR] & 0x7f)
+		data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
+	if (data[RTC_DATE] & 0x1f)
+		data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				 data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	return ret;
+}
+static int max8997_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max8997_rtc_tm_to_data(&alrm->time, data);
+	if (ret < 0)
+		return ret;
+
+	dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d\n", __func__,
+			data[RTC_YEAR] + 2000, data[RTC_MONTH], data[RTC_DATE],
+			data[RTC_HOUR], data[RTC_MIN], data[RTC_SEC]);
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_rtc_stop_alarm(info);
+	if (ret < 0)
+		goto out;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+	if (ret < 0)
+		goto out;
+
+	if (alrm->enabled)
+		ret = max8997_rtc_start_alarm(info);
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max8997_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&info->lock);
+	if (enabled)
+		ret = max8997_rtc_start_alarm(info);
+	else
+		ret = max8997_rtc_stop_alarm(info);
+	mutex_unlock(&info->lock);
+
+	return ret;
+}
+
+static irqreturn_t max8997_rtc_alarm_irq(int irq, void *data)
+{
+	struct max8997_rtc_info *info = data;
+
+	dev_info(info->dev, "%s:irq(%d)\n", __func__, irq);
+
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops max8997_rtc_ops = {
+	.read_time = max8997_rtc_read_time,
+	.set_time = max8997_rtc_set_time,
+	.read_alarm = max8997_rtc_read_alarm,
+	.set_alarm = max8997_rtc_set_alarm,
+	.alarm_irq_enable = max8997_rtc_alarm_irq_enable,
+};
+
+static void max8997_rtc_enable_wtsr(struct max8997_rtc_info *info, bool enable)
+{
+	int ret;
+	u8 val, mask;
+
+	if (!wtsr_en)
+		return;
+
+	if (enable)
+		val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT);
+	else
+		val = 0;
+
+	mask = WTSR_EN_MASK | WTSRT_MASK;
+
+	dev_info(info->dev, "%s: %s WTSR\n", __func__,
+			enable ? "enable" : "disable");
+
+	ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
+				__func__, ret);
+		return;
+	}
+
+	max8997_rtc_set_update_reg(info);
+}
+
+static void max8997_rtc_enable_smpl(struct max8997_rtc_info *info, bool enable)
+{
+	int ret;
+	u8 val, mask;
+
+	if (!smpl_en)
+		return;
+
+	if (enable)
+		val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT);
+	else
+		val = 0;
+
+	mask = SMPL_EN_MASK | SMPLT_MASK;
+
+	dev_info(info->dev, "%s: %s SMPL\n", __func__,
+			enable ? "enable" : "disable");
+
+	ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
+				__func__, ret);
+		return;
+	}
+
+	max8997_rtc_set_update_reg(info);
+
+	val = 0;
+	max8997_read_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, &val);
+	pr_info("WTSR_SMPL(0x%02x)\n", val);
+}
+
+static int max8997_rtc_init_reg(struct max8997_rtc_info *info)
+{
+	u8 data[2];
+	int ret;
+
+	/* Set RTC control register : Binary mode, 24hour mdoe */
+	data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+	data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+
+	info->rtc_24hr_mode = 1;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_CTRLMASK, 2, data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
+				__func__, ret);
+		return ret;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+	return ret;
+}
+
+static int max8997_rtc_probe(struct platform_device *pdev)
+{
+	struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_rtc_info *info;
+	int ret, virq;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_rtc_info),
+			GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->lock);
+	info->dev = &pdev->dev;
+	info->max8997 = max8997;
+	info->rtc = max8997->rtc;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = max8997_rtc_init_reg(info);
+
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
+		return ret;
+	}
+
+	max8997_rtc_enable_wtsr(info, true);
+	max8997_rtc_enable_smpl(info, true);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max8997-rtc",
+					&max8997_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		return ret;
+	}
+
+	virq = irq_create_mapping(max8997->irq_domain, MAX8997_PMICIRQ_RTCA1);
+	if (!virq) {
+		dev_err(&pdev->dev, "Failed to create mapping alarm IRQ\n");
+		ret = -ENXIO;
+		goto err_out;
+	}
+	info->virq = virq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+				max8997_rtc_alarm_irq, 0,
+				"rtc-alarm0", info);
+	if (ret < 0)
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			info->virq, ret);
+
+err_out:
+	return ret;
+}
+
+static void max8997_rtc_shutdown(struct platform_device *pdev)
+{
+	struct max8997_rtc_info *info = platform_get_drvdata(pdev);
+
+	max8997_rtc_enable_wtsr(info, false);
+	max8997_rtc_enable_smpl(info, false);
+}
+
+static const struct platform_device_id rtc_id[] = {
+	{ "max8997-rtc", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, rtc_id);
+
+static struct platform_driver max8997_rtc_driver = {
+	.driver		= {
+		.name	= "max8997-rtc",
+	},
+	.probe		= max8997_rtc_probe,
+	.shutdown	= max8997_rtc_shutdown,
+	.id_table	= rtc_id,
+};
+
+module_platform_driver(max8997_rtc_driver);
+
+MODULE_DESCRIPTION("Maxim MAX8997 RTC driver");
+MODULE_AUTHOR("<ms925.kim@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-max8998.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8998.c
new file mode 100644
index 0000000..30804b0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-max8998.c
@@ -0,0 +1,327 @@
+/*
+ * RTC driver for Maxim MAX8998
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Minkyu Kang <mk7.kang@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/bcd.h>
+#include <linux/irqdomain.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+#include <linux/delay.h>
+
+#define MAX8998_RTC_SEC			0x00
+#define MAX8998_RTC_MIN			0x01
+#define MAX8998_RTC_HOUR		0x02
+#define MAX8998_RTC_WEEKDAY		0x03
+#define MAX8998_RTC_DATE		0x04
+#define MAX8998_RTC_MONTH		0x05
+#define MAX8998_RTC_YEAR1		0x06
+#define MAX8998_RTC_YEAR2		0x07
+#define MAX8998_ALARM0_SEC		0x08
+#define MAX8998_ALARM0_MIN		0x09
+#define MAX8998_ALARM0_HOUR		0x0a
+#define MAX8998_ALARM0_WEEKDAY		0x0b
+#define MAX8998_ALARM0_DATE		0x0c
+#define MAX8998_ALARM0_MONTH		0x0d
+#define MAX8998_ALARM0_YEAR1		0x0e
+#define MAX8998_ALARM0_YEAR2		0x0f
+#define MAX8998_ALARM1_SEC		0x10
+#define MAX8998_ALARM1_MIN		0x11
+#define MAX8998_ALARM1_HOUR		0x12
+#define MAX8998_ALARM1_WEEKDAY		0x13
+#define MAX8998_ALARM1_DATE		0x14
+#define MAX8998_ALARM1_MONTH		0x15
+#define MAX8998_ALARM1_YEAR1		0x16
+#define MAX8998_ALARM1_YEAR2		0x17
+#define MAX8998_ALARM0_CONF		0x18
+#define MAX8998_ALARM1_CONF		0x19
+#define MAX8998_RTC_STATUS		0x1a
+#define MAX8998_WTSR_SMPL_CNTL		0x1b
+#define MAX8998_TEST			0x1f
+
+#define HOUR_12				(1 << 7)
+#define HOUR_PM				(1 << 5)
+#define ALARM0_STATUS			(1 << 1)
+#define ALARM1_STATUS			(1 << 2)
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_DATE,
+	RTC_MONTH,
+	RTC_YEAR1,
+	RTC_YEAR2,
+};
+
+struct max8998_rtc_info {
+	struct device		*dev;
+	struct max8998_dev	*max8998;
+	struct i2c_client	*rtc;
+	struct rtc_device	*rtc_dev;
+	int irq;
+	bool lp3974_bug_workaround;
+};
+
+static void max8998_data_to_tm(u8 *data, struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(data[RTC_SEC]);
+	tm->tm_min = bcd2bin(data[RTC_MIN]);
+	if (data[RTC_HOUR] & HOUR_12) {
+		tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x1f);
+		if (data[RTC_HOUR] & HOUR_PM)
+			tm->tm_hour += 12;
+	} else
+		tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
+
+	tm->tm_wday = data[RTC_WEEKDAY] & 0x07;
+	tm->tm_mday = bcd2bin(data[RTC_DATE]);
+	tm->tm_mon = bcd2bin(data[RTC_MONTH]);
+	tm->tm_year = bcd2bin(data[RTC_YEAR1]) + bcd2bin(data[RTC_YEAR2]) * 100;
+	tm->tm_year -= 1900;
+}
+
+static void max8998_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	data[RTC_SEC] = bin2bcd(tm->tm_sec);
+	data[RTC_MIN] = bin2bcd(tm->tm_min);
+	data[RTC_HOUR] = bin2bcd(tm->tm_hour);
+	data[RTC_WEEKDAY] = tm->tm_wday;
+	data[RTC_DATE] = bin2bcd(tm->tm_mday);
+	data[RTC_MONTH] = bin2bcd(tm->tm_mon);
+	data[RTC_YEAR1] = bin2bcd(tm->tm_year % 100);
+	data[RTC_YEAR2] = bin2bcd((tm->tm_year + 1900) / 100);
+}
+
+static int max8998_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8998_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[8];
+	int ret;
+
+	ret = max8998_bulk_read(info->rtc, MAX8998_RTC_SEC, 8, data);
+	if (ret < 0)
+		return ret;
+
+	max8998_data_to_tm(data, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int max8998_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8998_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[8];
+	int ret;
+
+	max8998_tm_to_data(tm, data);
+
+	ret = max8998_bulk_write(info->rtc, MAX8998_RTC_SEC, 8, data);
+
+	if (info->lp3974_bug_workaround)
+		msleep(2000);
+
+	return ret;
+}
+
+static int max8998_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8998_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[8];
+	u8 val;
+	int ret;
+
+	ret = max8998_bulk_read(info->rtc, MAX8998_ALARM0_SEC, 8, data);
+	if (ret < 0)
+		return ret;
+
+	max8998_data_to_tm(data, &alrm->time);
+
+	ret = max8998_read_reg(info->rtc, MAX8998_ALARM0_CONF, &val);
+	if (ret < 0)
+		return ret;
+
+	alrm->enabled = !!val;
+
+	ret = max8998_read_reg(info->rtc, MAX8998_RTC_STATUS, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & ALARM0_STATUS)
+		alrm->pending = 1;
+	else
+		alrm->pending = 0;
+
+	return 0;
+}
+
+static int max8998_rtc_stop_alarm(struct max8998_rtc_info *info)
+{
+	int ret = max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, 0);
+
+	if (info->lp3974_bug_workaround)
+		msleep(2000);
+
+	return ret;
+}
+
+static int max8998_rtc_start_alarm(struct max8998_rtc_info *info)
+{
+	int ret;
+	u8 alarm0_conf = 0x77;
+
+	/* LP3974 with delay bug chips has rtc alarm bugs with "MONTH" field */
+	if (info->lp3974_bug_workaround)
+		alarm0_conf = 0x57;
+
+	ret = max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, alarm0_conf);
+
+	if (info->lp3974_bug_workaround)
+		msleep(2000);
+
+	return ret;
+}
+
+static int max8998_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8998_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[8];
+	int ret;
+
+	max8998_tm_to_data(&alrm->time, data);
+
+	ret = max8998_rtc_stop_alarm(info);
+	if (ret < 0)
+		return ret;
+
+	ret = max8998_bulk_write(info->rtc, MAX8998_ALARM0_SEC, 8, data);
+	if (ret < 0)
+		return ret;
+
+	if (info->lp3974_bug_workaround)
+		msleep(2000);
+
+	if (alrm->enabled)
+		ret = max8998_rtc_start_alarm(info);
+
+	return ret;
+}
+
+static int max8998_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct max8998_rtc_info *info = dev_get_drvdata(dev);
+
+	if (enabled)
+		return max8998_rtc_start_alarm(info);
+	else
+		return max8998_rtc_stop_alarm(info);
+}
+
+static irqreturn_t max8998_rtc_alarm_irq(int irq, void *data)
+{
+	struct max8998_rtc_info *info = data;
+
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops max8998_rtc_ops = {
+	.read_time = max8998_rtc_read_time,
+	.set_time = max8998_rtc_set_time,
+	.read_alarm = max8998_rtc_read_alarm,
+	.set_alarm = max8998_rtc_set_alarm,
+	.alarm_irq_enable = max8998_rtc_alarm_irq_enable,
+};
+
+static int max8998_rtc_probe(struct platform_device *pdev)
+{
+	struct max8998_dev *max8998 = dev_get_drvdata(pdev->dev.parent);
+	struct max8998_platform_data *pdata = max8998->pdata;
+	struct max8998_rtc_info *info;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8998_rtc_info),
+			GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->max8998 = max8998;
+	info->rtc = max8998->rtc;
+
+	platform_set_drvdata(pdev, info);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max8998-rtc",
+			&max8998_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		return ret;
+	}
+
+	if (!max8998->irq_domain)
+		goto no_irq;
+
+	info->irq = irq_create_mapping(max8998->irq_domain, MAX8998_IRQ_ALARM0);
+	if (!info->irq) {
+		dev_warn(&pdev->dev, "Failed to map alarm IRQ\n");
+		goto no_irq;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+				max8998_rtc_alarm_irq, 0, "rtc-alarm0", info);
+
+	if (ret < 0)
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			info->irq, ret);
+
+no_irq:
+	dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name);
+	if (pdata && pdata->rtc_delay) {
+		info->lp3974_bug_workaround = true;
+		dev_warn(&pdev->dev, "LP3974 with RTC REGERR option."
+				" RTC updates will be extremely slow.\n");
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id max8998_rtc_id[] = {
+	{ "max8998-rtc", TYPE_MAX8998 },
+	{ "lp3974-rtc", TYPE_LP3974 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max8998_rtc_id);
+
+static struct platform_driver max8998_rtc_driver = {
+	.driver		= {
+		.name	= "max8998-rtc",
+	},
+	.probe		= max8998_rtc_probe,
+	.id_table	= max8998_rtc_id,
+};
+
+module_platform_driver(max8998_rtc_driver);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX8998 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mc13xxx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mc13xxx.c
new file mode 100644
index 0000000..30b8ef6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mc13xxx.c
@@ -0,0 +1,357 @@
+/*
+ * Real Time Clock driver for Freescale MC13XXX PMIC
+ *
+ * (C) 2009 Sascha Hauer, Pengutronix
+ * (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/mc13xxx.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+
+#define DRIVER_NAME "mc13xxx-rtc"
+
+#define MC13XXX_RTCTOD	20
+#define MC13XXX_RTCTODA	21
+#define MC13XXX_RTCDAY	22
+#define MC13XXX_RTCDAYA	23
+
+#define SEC_PER_DAY	(24 * 60 * 60)
+
+struct mc13xxx_rtc {
+	struct rtc_device *rtc;
+	struct mc13xxx *mc13xxx;
+	int valid;
+};
+
+static int mc13xxx_rtc_irq_enable_unlocked(struct device *dev,
+		unsigned int enabled, int irq)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	int (*func)(struct mc13xxx *mc13xxx, int irq);
+
+	if (!priv->valid)
+		return -ENODATA;
+
+	func = enabled ? mc13xxx_irq_unmask : mc13xxx_irq_mask;
+	return func(priv->mc13xxx, irq);
+}
+
+static int mc13xxx_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	int ret;
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	ret = mc13xxx_rtc_irq_enable_unlocked(dev, enabled, MC13XXX_IRQ_TODA);
+
+	mc13xxx_unlock(priv->mc13xxx);
+
+	return ret;
+}
+
+static int mc13xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	unsigned int seconds, days1, days2;
+
+	if (!priv->valid)
+		return -ENODATA;
+
+	do {
+		int ret;
+
+		ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCDAY, &days1);
+		if (ret)
+			return ret;
+
+		ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCTOD, &seconds);
+		if (ret)
+			return ret;
+
+		ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCDAY, &days2);
+		if (ret)
+			return ret;
+	} while (days1 != days2);
+
+	rtc_time64_to_tm((time64_t)days1 * SEC_PER_DAY + seconds, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int mc13xxx_rtc_set_mmss(struct device *dev, time64_t secs)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	unsigned int seconds, days;
+	unsigned int alarmseconds;
+	int ret;
+
+	days = div_s64_rem(secs, SEC_PER_DAY, &seconds);
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	/*
+	 * temporarily invalidate alarm to prevent triggering it when the day is
+	 * already updated while the time isn't yet.
+	 */
+	ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCTODA, &alarmseconds);
+	if (unlikely(ret))
+		goto out;
+
+	if (alarmseconds < SEC_PER_DAY) {
+		ret = mc13xxx_reg_write(priv->mc13xxx,
+				MC13XXX_RTCTODA, 0x1ffff);
+		if (unlikely(ret))
+			goto out;
+	}
+
+	/*
+	 * write seconds=0 to prevent a day switch between writing days
+	 * and seconds below
+	 */
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCTOD, 0);
+	if (unlikely(ret))
+		goto out;
+
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCDAY, days);
+	if (unlikely(ret))
+		goto out;
+
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCTOD, seconds);
+	if (unlikely(ret))
+		goto out;
+
+	/* restore alarm */
+	if (alarmseconds < SEC_PER_DAY) {
+		ret = mc13xxx_reg_write(priv->mc13xxx,
+				MC13XXX_RTCTODA, alarmseconds);
+		if (unlikely(ret))
+			goto out;
+	}
+
+	if (!priv->valid) {
+		ret = mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_RTCRST);
+		if (unlikely(ret))
+			goto out;
+
+		ret = mc13xxx_irq_unmask(priv->mc13xxx, MC13XXX_IRQ_RTCRST);
+	}
+
+out:
+	priv->valid = !ret;
+
+	mc13xxx_unlock(priv->mc13xxx);
+
+	return ret;
+}
+
+static int mc13xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	unsigned seconds, days;
+	time64_t s1970;
+	int enabled, pending;
+	int ret;
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCTODA, &seconds);
+	if (unlikely(ret))
+		goto out;
+	if (seconds >= SEC_PER_DAY) {
+		ret = -ENODATA;
+		goto out;
+	}
+
+	ret = mc13xxx_reg_read(priv->mc13xxx, MC13XXX_RTCDAY, &days);
+	if (unlikely(ret))
+		goto out;
+
+	ret = mc13xxx_irq_status(priv->mc13xxx, MC13XXX_IRQ_TODA,
+			&enabled, &pending);
+
+out:
+	mc13xxx_unlock(priv->mc13xxx);
+
+	if (ret)
+		return ret;
+
+	alarm->enabled = enabled;
+	alarm->pending = pending;
+
+	s1970 = (time64_t)days * SEC_PER_DAY + seconds;
+
+	rtc_time64_to_tm(s1970, &alarm->time);
+	dev_dbg(dev, "%s: %lld\n", __func__, (long long)s1970);
+
+	return 0;
+}
+
+static int mc13xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
+	time64_t s1970;
+	u32 seconds, days;
+	int ret;
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	/* disable alarm to prevent false triggering */
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCTODA, 0x1ffff);
+	if (unlikely(ret))
+		goto out;
+
+	ret = mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TODA);
+	if (unlikely(ret))
+		goto out;
+
+	s1970 = rtc_tm_to_time64(&alarm->time);
+
+	dev_dbg(dev, "%s: %s %lld\n", __func__, alarm->enabled ? "on" : "off",
+			(long long)s1970);
+
+	ret = mc13xxx_rtc_irq_enable_unlocked(dev, alarm->enabled,
+			MC13XXX_IRQ_TODA);
+	if (unlikely(ret))
+		goto out;
+
+	days = div_s64_rem(s1970, SEC_PER_DAY, &seconds);
+
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCDAYA, days);
+	if (unlikely(ret))
+		goto out;
+
+	ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCTODA, seconds);
+
+out:
+	mc13xxx_unlock(priv->mc13xxx);
+
+	return ret;
+}
+
+static irqreturn_t mc13xxx_rtc_alarm_handler(int irq, void *dev)
+{
+	struct mc13xxx_rtc *priv = dev;
+	struct mc13xxx *mc13xxx = priv->mc13xxx;
+
+	rtc_update_irq(priv->rtc, 1, RTC_IRQF | RTC_AF);
+
+	mc13xxx_irq_ack(mc13xxx, irq);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops mc13xxx_rtc_ops = {
+	.read_time = mc13xxx_rtc_read_time,
+	.set_mmss64 = mc13xxx_rtc_set_mmss,
+	.read_alarm = mc13xxx_rtc_read_alarm,
+	.set_alarm = mc13xxx_rtc_set_alarm,
+	.alarm_irq_enable = mc13xxx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t mc13xxx_rtc_reset_handler(int irq, void *dev)
+{
+	struct mc13xxx_rtc *priv = dev;
+	struct mc13xxx *mc13xxx = priv->mc13xxx;
+
+	priv->valid = 0;
+
+	mc13xxx_irq_mask(mc13xxx, irq);
+
+	return IRQ_HANDLED;
+}
+
+static int __init mc13xxx_rtc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct mc13xxx_rtc *priv;
+	struct mc13xxx *mc13xxx;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mc13xxx = dev_get_drvdata(pdev->dev.parent);
+	priv->mc13xxx = mc13xxx;
+	priv->valid = 1;
+
+	platform_set_drvdata(pdev, priv);
+
+	mc13xxx_lock(mc13xxx);
+
+	mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_RTCRST);
+
+	ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_RTCRST,
+			mc13xxx_rtc_reset_handler, DRIVER_NAME, priv);
+	if (ret)
+		goto err_irq_request;
+
+	ret = mc13xxx_irq_request_nounmask(mc13xxx, MC13XXX_IRQ_TODA,
+			mc13xxx_rtc_alarm_handler, DRIVER_NAME, priv);
+	if (ret)
+		goto err_irq_request;
+
+	mc13xxx_unlock(mc13xxx);
+
+	priv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					     &mc13xxx_rtc_ops, THIS_MODULE);
+
+	return 0;
+
+err_irq_request:
+	mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_TODA, priv);
+	mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_RTCRST, priv);
+
+	mc13xxx_unlock(mc13xxx);
+
+	return ret;
+}
+
+static int mc13xxx_rtc_remove(struct platform_device *pdev)
+{
+	struct mc13xxx_rtc *priv = platform_get_drvdata(pdev);
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TODA, priv);
+	mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_RTCRST, priv);
+
+	mc13xxx_unlock(priv->mc13xxx);
+
+	return 0;
+}
+
+static const struct platform_device_id mc13xxx_rtc_idtable[] = {
+	{
+		.name = "mc13783-rtc",
+	}, {
+		.name = "mc13892-rtc",
+	}, {
+		.name = "mc34708-rtc",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mc13xxx_rtc_idtable);
+
+static struct platform_driver mc13xxx_rtc_driver = {
+	.id_table = mc13xxx_rtc_idtable,
+	.remove = mc13xxx_rtc_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+	},
+};
+
+module_platform_driver_probe(mc13xxx_rtc_driver, &mc13xxx_rtc_probe);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("RTC driver for Freescale MC13XXX PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mc146818-lib.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mc146818-lib.c
new file mode 100644
index 0000000..18a6f15
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mc146818-lib.c
@@ -0,0 +1,198 @@
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/mc146818rtc.h>
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif
+
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char mc146818_is_updating(void)
+{
+	unsigned char uip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return uip;
+}
+
+unsigned int mc146818_get_time(struct rtc_time *time)
+{
+	unsigned char ctrl;
+	unsigned long flags;
+	unsigned char century = 0;
+
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_year;
+#endif
+
+	/*
+	 * read RTC once any update in progress is done. The update
+	 * can take just over 2ms. We wait 20ms. There is no need to
+	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+	 * If you need to know *exactly* when a second has started, enable
+	 * periodic update complete interrupts, (via ioctl) and then
+	 * immediately read /dev/rtc which will block until you get the IRQ.
+	 * Once the read clears, read the RTC time (again via ioctl). Easy.
+	 */
+	if (mc146818_is_updating())
+		mdelay(20);
+
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	spin_lock_irqsave(&rtc_lock, flags);
+	time->tm_sec = CMOS_READ(RTC_SECONDS);
+	time->tm_min = CMOS_READ(RTC_MINUTES);
+	time->tm_hour = CMOS_READ(RTC_HOURS);
+	time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+	time->tm_mon = CMOS_READ(RTC_MONTH);
+	time->tm_year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_MACH_DECSTATION
+	real_year = CMOS_READ(RTC_DEC_YEAR);
+#endif
+#ifdef CONFIG_ACPI
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+	    acpi_gbl_FADT.century)
+		century = CMOS_READ(acpi_gbl_FADT.century);
+#endif
+	ctrl = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	{
+		time->tm_sec = bcd2bin(time->tm_sec);
+		time->tm_min = bcd2bin(time->tm_min);
+		time->tm_hour = bcd2bin(time->tm_hour);
+		time->tm_mday = bcd2bin(time->tm_mday);
+		time->tm_mon = bcd2bin(time->tm_mon);
+		time->tm_year = bcd2bin(time->tm_year);
+		century = bcd2bin(century);
+	}
+
+#ifdef CONFIG_MACH_DECSTATION
+	time->tm_year += real_year - 72;
+#endif
+
+	if (century > 20)
+		time->tm_year += (century - 19) * 100;
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	if (time->tm_year <= 69)
+		time->tm_year += 100;
+
+	time->tm_mon--;
+
+	return RTC_24H;
+}
+EXPORT_SYMBOL_GPL(mc146818_get_time);
+
+/* Set the current date and time in the real time clock. */
+int mc146818_set_time(struct rtc_time *time)
+{
+	unsigned long flags;
+	unsigned char mon, day, hrs, min, sec;
+	unsigned char save_control, save_freq_select;
+	unsigned int yrs;
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_yrs, leap_yr;
+#endif
+	unsigned char century = 0;
+
+	yrs = time->tm_year;
+	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
+	day = time->tm_mday;
+	hrs = time->tm_hour;
+	min = time->tm_min;
+	sec = time->tm_sec;
+
+	if (yrs > 255)	/* They are unsigned */
+		return -EINVAL;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+#ifdef CONFIG_MACH_DECSTATION
+	real_yrs = yrs;
+	leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
+			!((yrs + 1900) % 400));
+	yrs = 72;
+
+	/*
+	 * We want to keep the year set to 73 until March
+	 * for non-leap years, so that Feb, 29th is handled
+	 * correctly.
+	 */
+	if (!leap_yr && mon < 3) {
+		real_yrs--;
+		yrs = 73;
+	}
+#endif
+
+#ifdef CONFIG_ACPI
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+	    acpi_gbl_FADT.century) {
+		century = (yrs + 1900) / 100;
+		yrs %= 100;
+	}
+#endif
+
+	/* These limits and adjustments are independent of
+	 * whether the chip is in binary mode or not.
+	 */
+	if (yrs > 169) {
+		spin_unlock_irqrestore(&rtc_lock, flags);
+		return -EINVAL;
+	}
+
+	if (yrs >= 100)
+		yrs -= 100;
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+	    || RTC_ALWAYS_BCD) {
+		sec = bin2bcd(sec);
+		min = bin2bcd(min);
+		hrs = bin2bcd(hrs);
+		day = bin2bcd(day);
+		mon = bin2bcd(mon);
+		yrs = bin2bcd(yrs);
+		century = bin2bcd(century);
+	}
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_MACH_DECSTATION
+	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
+#endif
+	CMOS_WRITE(yrs, RTC_YEAR);
+	CMOS_WRITE(mon, RTC_MONTH);
+	CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+	CMOS_WRITE(hrs, RTC_HOURS);
+	CMOS_WRITE(min, RTC_MINUTES);
+	CMOS_WRITE(sec, RTC_SECONDS);
+#ifdef CONFIG_ACPI
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+	    acpi_gbl_FADT.century)
+		CMOS_WRITE(century, acpi_gbl_FADT.century);
+#endif
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc146818_set_time);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mcp795.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mcp795.c
new file mode 100644
index 0000000..77f2133
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mcp795.c
@@ -0,0 +1,457 @@
+/*
+ * SPI Driver for Microchip MCP795 RTC
+ *
+ * Copyright (C) Josef Gajdusek <atx@atx.name>
+ *
+ * based on other Linux RTC drivers
+ *
+ * Device datasheet:
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22280A.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/printk.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+
+/* MCP795 Instructions, see datasheet table 3-1 */
+#define MCP795_EEREAD	0x03
+#define MCP795_EEWRITE	0x02
+#define MCP795_EEWRDI	0x04
+#define MCP795_EEWREN	0x06
+#define MCP795_SRREAD	0x05
+#define MCP795_SRWRITE	0x01
+#define MCP795_READ	0x13
+#define MCP795_WRITE	0x12
+#define MCP795_UNLOCK	0x14
+#define MCP795_IDWRITE	0x32
+#define MCP795_IDREAD	0x33
+#define MCP795_CLRWDT	0x44
+#define MCP795_CLRRAM	0x54
+
+/* MCP795 RTCC registers, see datasheet table 4-1 */
+#define MCP795_REG_SECONDS	0x01
+#define MCP795_REG_DAY		0x04
+#define MCP795_REG_MONTH	0x06
+#define MCP795_REG_CONTROL	0x08
+#define MCP795_REG_ALM0_SECONDS	0x0C
+#define MCP795_REG_ALM0_DAY	0x0F
+
+#define MCP795_ST_BIT		BIT(7)
+#define MCP795_24_BIT		BIT(6)
+#define MCP795_LP_BIT		BIT(5)
+#define MCP795_EXTOSC_BIT	BIT(3)
+#define MCP795_OSCON_BIT	BIT(5)
+#define MCP795_ALM0_BIT		BIT(4)
+#define MCP795_ALM1_BIT		BIT(5)
+#define MCP795_ALM0IF_BIT	BIT(3)
+#define MCP795_ALM0C0_BIT	BIT(4)
+#define MCP795_ALM0C1_BIT	BIT(5)
+#define MCP795_ALM0C2_BIT	BIT(6)
+
+#define SEC_PER_DAY		(24 * 60 * 60)
+
+static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+	u8 tx[2];
+
+	tx[0] = MCP795_READ;
+	tx[1] = addr;
+	ret = spi_write_then_read(spi, tx, sizeof(tx), buf, count);
+
+	if (ret)
+		dev_err(dev, "Failed reading %d bytes from address %x.\n",
+					count, addr);
+
+	return ret;
+}
+
+static int mcp795_rtcc_write(struct device *dev, u8 addr, u8 *data, u8 count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+	u8 tx[2 + count];
+
+	tx[0] = MCP795_WRITE;
+	tx[1] = addr;
+	memcpy(&tx[2], data, count);
+
+	ret = spi_write(spi, tx, 2 + count);
+
+	if (ret)
+		dev_err(dev, "Failed to write %d bytes to address %x.\n",
+					count, addr);
+
+	return ret;
+}
+
+static int mcp795_rtcc_set_bits(struct device *dev, u8 addr, u8 mask, u8 state)
+{
+	int ret;
+	u8 tmp;
+
+	ret = mcp795_rtcc_read(dev, addr, &tmp, 1);
+	if (ret)
+		return ret;
+
+	if ((tmp & mask) != state) {
+		tmp = (tmp & ~mask) | state;
+		ret = mcp795_rtcc_write(dev, addr, &tmp, 1);
+	}
+
+	return ret;
+}
+
+static int mcp795_stop_oscillator(struct device *dev, bool *extosc)
+{
+	int retries = 5;
+	int ret;
+	u8 data;
+
+	ret = mcp795_rtcc_set_bits(dev, MCP795_REG_SECONDS, MCP795_ST_BIT, 0);
+	if (ret)
+		return ret;
+	ret = mcp795_rtcc_read(dev, MCP795_REG_CONTROL, &data, 1);
+	if (ret)
+		return ret;
+	*extosc = !!(data & MCP795_EXTOSC_BIT);
+	ret = mcp795_rtcc_set_bits(
+				dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, 0);
+	if (ret)
+		return ret;
+	/* wait for the OSCON bit to clear */
+	do {
+		usleep_range(700, 800);
+		ret = mcp795_rtcc_read(dev, MCP795_REG_DAY, &data, 1);
+		if (ret)
+			break;
+		if (!(data & MCP795_OSCON_BIT))
+			break;
+
+	} while (--retries);
+
+	return !retries ? -EIO : ret;
+}
+
+static int mcp795_start_oscillator(struct device *dev, bool *extosc)
+{
+	if (extosc) {
+		u8 data = *extosc ? MCP795_EXTOSC_BIT : 0;
+		int ret;
+
+		ret = mcp795_rtcc_set_bits(
+			dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, data);
+		if (ret)
+			return ret;
+	}
+	return mcp795_rtcc_set_bits(
+			dev, MCP795_REG_SECONDS, MCP795_ST_BIT, MCP795_ST_BIT);
+}
+
+/* Enable or disable Alarm 0 in RTC */
+static int mcp795_update_alarm(struct device *dev, bool enable)
+{
+	int ret;
+
+	dev_dbg(dev, "%s alarm\n", enable ? "Enable" : "Disable");
+
+	if (enable) {
+		/* clear ALM0IF (Alarm 0 Interrupt Flag) bit */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_ALM0_DAY,
+					MCP795_ALM0IF_BIT, 0);
+		if (ret)
+			return ret;
+		/* enable alarm 0 */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_ALM0_BIT, MCP795_ALM0_BIT);
+	} else {
+		/* disable alarm 0 and alarm 1 */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_ALM0_BIT | MCP795_ALM1_BIT, 0);
+	}
+	return ret;
+}
+
+static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
+{
+	int ret;
+	u8 data[7];
+	bool extosc;
+
+	/* Stop RTC and store current value of EXTOSC bit */
+	ret = mcp795_stop_oscillator(dev, &extosc);
+	if (ret)
+		return ret;
+
+	/* Read first, so we can leave config bits untouched */
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
+
+	if (ret)
+		return ret;
+
+	data[0] = (data[0] & 0x80) | bin2bcd(tim->tm_sec);
+	data[1] = (data[1] & 0x80) | bin2bcd(tim->tm_min);
+	data[2] = bin2bcd(tim->tm_hour);
+	data[3] = (data[3] & 0xF8) | bin2bcd(tim->tm_wday + 1);
+	data[4] = bin2bcd(tim->tm_mday);
+	data[5] = (data[5] & MCP795_LP_BIT) | bin2bcd(tim->tm_mon + 1);
+
+	if (tim->tm_year > 100)
+		tim->tm_year -= 100;
+
+	data[6] = bin2bcd(tim->tm_year);
+
+	/* Always write the date and month using a separate Write command.
+	 * This is a workaround for a know silicon issue that some combinations
+	 * of date and month values may result in the date being reset to 1.
+	 */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_SECONDS, data, 5);
+	if (ret)
+		return ret;
+
+	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[5], 2);
+	if (ret)
+		return ret;
+
+	/* Start back RTC and restore previous value of EXTOSC bit.
+	 * There is no need to clear EXTOSC bit when the previous value was 0
+	 * because it was already cleared when stopping the RTC oscillator.
+	 */
+	ret = mcp795_start_oscillator(dev, extosc ? &extosc : NULL);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev, "Set mcp795: %04d-%02d-%02d(%d) %02d:%02d:%02d\n",
+			tim->tm_year + 1900, tim->tm_mon, tim->tm_mday,
+			tim->tm_wday, tim->tm_hour, tim->tm_min, tim->tm_sec);
+
+	return 0;
+}
+
+static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
+{
+	int ret;
+	u8 data[7];
+
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
+
+	if (ret)
+		return ret;
+
+	tim->tm_sec	= bcd2bin(data[0] & 0x7F);
+	tim->tm_min	= bcd2bin(data[1] & 0x7F);
+	tim->tm_hour	= bcd2bin(data[2] & 0x3F);
+	tim->tm_wday	= bcd2bin(data[3] & 0x07) - 1;
+	tim->tm_mday	= bcd2bin(data[4] & 0x3F);
+	tim->tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
+	tim->tm_year	= bcd2bin(data[6]) + 100; /* Assume we are in 20xx */
+
+	dev_dbg(dev, "Read from mcp795: %04d-%02d-%02d(%d) %02d:%02d:%02d\n",
+			tim->tm_year + 1900, tim->tm_mon, tim->tm_mday,
+			tim->tm_wday, tim->tm_hour, tim->tm_min, tim->tm_sec);
+
+	return rtc_valid_tm(tim);
+}
+
+static int mcp795_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_time now_tm;
+	time64_t now;
+	time64_t later;
+	u8 tmp[6];
+	int ret;
+
+	/* Read current time from RTC hardware */
+	ret = mcp795_read_time(dev, &now_tm);
+	if (ret)
+		return ret;
+	/* Get the number of seconds since 1970 */
+	now = rtc_tm_to_time64(&now_tm);
+	later = rtc_tm_to_time64(&alm->time);
+	if (later <= now)
+		return -EINVAL;
+	/* make sure alarm fires within the next one year */
+	if ((later - now) >=
+		(SEC_PER_DAY * (365 + is_leap_year(alm->time.tm_year))))
+		return -EDOM;
+	/* disable alarm */
+	ret = mcp795_update_alarm(dev, false);
+	if (ret)
+		return ret;
+	/* Read registers, so we can leave configuration bits untouched */
+	ret = mcp795_rtcc_read(dev, MCP795_REG_ALM0_SECONDS, tmp, sizeof(tmp));
+	if (ret)
+		return ret;
+
+	alm->time.tm_year	= -1;
+	alm->time.tm_isdst	= -1;
+	alm->time.tm_yday	= -1;
+
+	tmp[0] = (tmp[0] & 0x80) | bin2bcd(alm->time.tm_sec);
+	tmp[1] = (tmp[1] & 0x80) | bin2bcd(alm->time.tm_min);
+	tmp[2] = (tmp[2] & 0xE0) | bin2bcd(alm->time.tm_hour);
+	tmp[3] = (tmp[3] & 0x80) | bin2bcd(alm->time.tm_wday + 1);
+	/* set alarm match: seconds, minutes, hour, day, date and month */
+	tmp[3] |= (MCP795_ALM0C2_BIT | MCP795_ALM0C1_BIT | MCP795_ALM0C0_BIT);
+	tmp[4] = (tmp[4] & 0xC0) | bin2bcd(alm->time.tm_mday);
+	tmp[5] = (tmp[5] & 0xE0) | bin2bcd(alm->time.tm_mon + 1);
+
+	ret = mcp795_rtcc_write(dev, MCP795_REG_ALM0_SECONDS, tmp, sizeof(tmp));
+	if (ret)
+		return ret;
+
+	/* enable alarm if requested */
+	if (alm->enabled) {
+		ret = mcp795_update_alarm(dev, true);
+		if (ret)
+			return ret;
+		dev_dbg(dev, "Alarm IRQ armed\n");
+	}
+	dev_dbg(dev, "Set alarm: %02d-%02d(%d) %02d:%02d:%02d\n",
+			alm->time.tm_mon, alm->time.tm_mday, alm->time.tm_wday,
+			alm->time.tm_hour, alm->time.tm_min, alm->time.tm_sec);
+	return 0;
+}
+
+static int mcp795_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	u8 data[6];
+	int ret;
+
+	ret = mcp795_rtcc_read(
+			dev, MCP795_REG_ALM0_SECONDS, data, sizeof(data));
+	if (ret)
+		return ret;
+
+	alm->time.tm_sec	= bcd2bin(data[0] & 0x7F);
+	alm->time.tm_min	= bcd2bin(data[1] & 0x7F);
+	alm->time.tm_hour	= bcd2bin(data[2] & 0x1F);
+	alm->time.tm_wday	= bcd2bin(data[3] & 0x07) - 1;
+	alm->time.tm_mday	= bcd2bin(data[4] & 0x3F);
+	alm->time.tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
+	alm->time.tm_year	= -1;
+	alm->time.tm_isdst	= -1;
+	alm->time.tm_yday	= -1;
+
+	dev_dbg(dev, "Read alarm: %02d-%02d(%d) %02d:%02d:%02d\n",
+			alm->time.tm_mon, alm->time.tm_mday, alm->time.tm_wday,
+			alm->time.tm_hour, alm->time.tm_min, alm->time.tm_sec);
+	return 0;
+}
+
+static int mcp795_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	return mcp795_update_alarm(dev, !!enabled);
+}
+
+static irqreturn_t mcp795_irq(int irq, void *data)
+{
+	struct spi_device *spi = data;
+	struct rtc_device *rtc = spi_get_drvdata(spi);
+	struct mutex *lock = &rtc->ops_lock;
+	int ret;
+
+	mutex_lock(lock);
+
+	/* Disable alarm.
+	 * There is no need to clear ALM0IF (Alarm 0 Interrupt Flag) bit,
+	 * because it is done every time when alarm is enabled.
+	 */
+	ret = mcp795_update_alarm(&spi->dev, false);
+	if (ret)
+		dev_err(&spi->dev,
+			"Failed to disable alarm in IRQ (ret=%d)\n", ret);
+	rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops mcp795_rtc_ops = {
+		.read_time = mcp795_read_time,
+		.set_time = mcp795_set_time,
+		.read_alarm = mcp795_read_alarm,
+		.set_alarm = mcp795_set_alarm,
+		.alarm_irq_enable = mcp795_alarm_irq_enable
+};
+
+static int mcp795_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	int ret;
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to setup SPI\n");
+		return ret;
+	}
+
+	/* Start the oscillator but don't set the value of EXTOSC bit */
+	mcp795_start_oscillator(&spi->dev, NULL);
+	/* Clear the 12 hour mode flag*/
+	mcp795_rtcc_set_bits(&spi->dev, 0x03, MCP795_24_BIT, 0);
+
+	rtc = devm_rtc_device_register(&spi->dev, "rtc-mcp795",
+					&mcp795_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	if (spi->irq > 0) {
+		dev_dbg(&spi->dev, "Alarm support enabled\n");
+
+		/* Clear any pending alarm (ALM0IF bit) before requesting
+		 * the interrupt.
+		 */
+		mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_ALM0_DAY,
+					MCP795_ALM0IF_BIT, 0);
+		ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+				mcp795_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				dev_name(&rtc->dev), spi);
+		if (ret)
+			dev_err(&spi->dev, "Failed to request IRQ: %d: %d\n",
+						spi->irq, ret);
+		else
+			device_init_wakeup(&spi->dev, true);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mcp795_of_match[] = {
+	{ .compatible = "maxim,mcp795" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp795_of_match);
+#endif
+
+static struct spi_driver mcp795_driver = {
+		.driver = {
+				.name = "rtc-mcp795",
+				.of_match_table = of_match_ptr(mcp795_of_match),
+		},
+		.probe = mcp795_probe,
+};
+
+module_spi_driver(mcp795_driver);
+
+MODULE_DESCRIPTION("MCP795 RTC SPI Driver");
+MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:mcp795");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-moxart.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-moxart.c
new file mode 100644
index 0000000..07b30a3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-moxart.c
@@ -0,0 +1,328 @@
+/*
+ * MOXA ART RTC driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Based on code from
+ * Moxa Technology Co., Ltd. <www.moxa.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#define GPIO_RTC_RESERVED			0x0C
+#define GPIO_RTC_DATA_SET			0x10
+#define GPIO_RTC_DATA_CLEAR			0x14
+#define GPIO_RTC_PIN_PULL_ENABLE		0x18
+#define GPIO_RTC_PIN_PULL_TYPE			0x1C
+#define GPIO_RTC_INT_ENABLE			0x20
+#define GPIO_RTC_INT_RAW_STATE			0x24
+#define GPIO_RTC_INT_MASKED_STATE		0x28
+#define GPIO_RTC_INT_MASK			0x2C
+#define GPIO_RTC_INT_CLEAR			0x30
+#define GPIO_RTC_INT_TRIGGER			0x34
+#define GPIO_RTC_INT_BOTH			0x38
+#define GPIO_RTC_INT_RISE_NEG			0x3C
+#define GPIO_RTC_BOUNCE_ENABLE			0x40
+#define GPIO_RTC_BOUNCE_PRE_SCALE		0x44
+#define GPIO_RTC_PROTECT_W			0x8E
+#define GPIO_RTC_PROTECT_R			0x8F
+#define GPIO_RTC_YEAR_W				0x8C
+#define GPIO_RTC_YEAR_R				0x8D
+#define GPIO_RTC_DAY_W				0x8A
+#define GPIO_RTC_DAY_R				0x8B
+#define GPIO_RTC_MONTH_W			0x88
+#define GPIO_RTC_MONTH_R			0x89
+#define GPIO_RTC_DATE_W				0x86
+#define GPIO_RTC_DATE_R				0x87
+#define GPIO_RTC_HOURS_W			0x84
+#define GPIO_RTC_HOURS_R			0x85
+#define GPIO_RTC_MINUTES_W			0x82
+#define GPIO_RTC_MINUTES_R			0x83
+#define GPIO_RTC_SECONDS_W			0x80
+#define GPIO_RTC_SECONDS_R			0x81
+#define GPIO_RTC_DELAY_TIME			8
+
+struct moxart_rtc {
+	struct rtc_device *rtc;
+	spinlock_t rtc_lock;
+	int gpio_data, gpio_sclk, gpio_reset;
+};
+
+static int day_of_year[12] =	{ 0, 31, 59, 90, 120, 151, 181,
+				  212, 243, 273, 304, 334 };
+
+static void moxart_rtc_write_byte(struct device *dev, u8 data)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < 8; i++, data >>= 1) {
+		gpio_set_value(moxart_rtc->gpio_sclk, 0);
+		gpio_set_value(moxart_rtc->gpio_data, ((data & 1) == 1));
+		udelay(GPIO_RTC_DELAY_TIME);
+		gpio_set_value(moxart_rtc->gpio_sclk, 1);
+		udelay(GPIO_RTC_DELAY_TIME);
+	}
+}
+
+static u8 moxart_rtc_read_byte(struct device *dev)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+	int i;
+	u8 data = 0;
+
+	for (i = 0; i < 8; i++) {
+		gpio_set_value(moxart_rtc->gpio_sclk, 0);
+		udelay(GPIO_RTC_DELAY_TIME);
+		gpio_set_value(moxart_rtc->gpio_sclk, 1);
+		udelay(GPIO_RTC_DELAY_TIME);
+		if (gpio_get_value(moxart_rtc->gpio_data))
+			data |= (1 << i);
+		udelay(GPIO_RTC_DELAY_TIME);
+	}
+	return data;
+}
+
+static u8 moxart_rtc_read_register(struct device *dev, u8 cmd)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+	u8 data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	gpio_direction_output(moxart_rtc->gpio_data, 0);
+	gpio_set_value(moxart_rtc->gpio_reset, 1);
+	udelay(GPIO_RTC_DELAY_TIME);
+	moxart_rtc_write_byte(dev, cmd);
+	gpio_direction_input(moxart_rtc->gpio_data);
+	udelay(GPIO_RTC_DELAY_TIME);
+	data = moxart_rtc_read_byte(dev);
+	gpio_set_value(moxart_rtc->gpio_sclk, 0);
+	gpio_set_value(moxart_rtc->gpio_reset, 0);
+	udelay(GPIO_RTC_DELAY_TIME);
+
+	local_irq_restore(flags);
+
+	return data;
+}
+
+static void moxart_rtc_write_register(struct device *dev, u8 cmd, u8 data)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	gpio_direction_output(moxart_rtc->gpio_data, 0);
+	gpio_set_value(moxart_rtc->gpio_reset, 1);
+	udelay(GPIO_RTC_DELAY_TIME);
+	moxart_rtc_write_byte(dev, cmd);
+	moxart_rtc_write_byte(dev, data);
+	gpio_set_value(moxart_rtc->gpio_sclk, 0);
+	gpio_set_value(moxart_rtc->gpio_reset, 0);
+	udelay(GPIO_RTC_DELAY_TIME);
+
+	local_irq_restore(flags);
+}
+
+static int moxart_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+
+	spin_lock_irq(&moxart_rtc->rtc_lock);
+
+	moxart_rtc_write_register(dev, GPIO_RTC_PROTECT_W, 0);
+	moxart_rtc_write_register(dev, GPIO_RTC_YEAR_W,
+				  (((tm->tm_year - 100) / 10) << 4) |
+				  ((tm->tm_year - 100) % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_MONTH_W,
+				  (((tm->tm_mon + 1) / 10) << 4) |
+				  ((tm->tm_mon + 1) % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_DATE_W,
+				  ((tm->tm_mday / 10) << 4) |
+				  (tm->tm_mday % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_HOURS_W,
+				  ((tm->tm_hour / 10) << 4) |
+				  (tm->tm_hour % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_MINUTES_W,
+				  ((tm->tm_min / 10) << 4) |
+				  (tm->tm_min % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_SECONDS_W,
+				  ((tm->tm_sec / 10) << 4) |
+				  (tm->tm_sec % 10));
+
+	moxart_rtc_write_register(dev, GPIO_RTC_PROTECT_W, 0x80);
+
+	spin_unlock_irq(&moxart_rtc->rtc_lock);
+
+	dev_dbg(dev, "%s: success tm_year=%d tm_mon=%d\n"
+		"tm_mday=%d tm_hour=%d tm_min=%d tm_sec=%d\n",
+		__func__, tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
+}
+
+static int moxart_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct moxart_rtc *moxart_rtc = dev_get_drvdata(dev);
+	unsigned char v;
+
+	spin_lock_irq(&moxart_rtc->rtc_lock);
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_SECONDS_R);
+	tm->tm_sec = (((v & 0x70) >> 4) * 10) + (v & 0x0F);
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_MINUTES_R);
+	tm->tm_min = (((v & 0x70) >> 4) * 10) + (v & 0x0F);
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_HOURS_R);
+	if (v & 0x80) { /* 12-hour mode */
+		tm->tm_hour = (((v & 0x10) >> 4) * 10) + (v & 0x0F);
+		if (v & 0x20) { /* PM mode */
+			tm->tm_hour += 12;
+			if (tm->tm_hour >= 24)
+				tm->tm_hour = 0;
+		}
+	} else { /* 24-hour mode */
+		tm->tm_hour = (((v & 0x30) >> 4) * 10) + (v & 0x0F);
+	}
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_DATE_R);
+	tm->tm_mday = (((v & 0x30) >> 4) * 10) + (v & 0x0F);
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_MONTH_R);
+	tm->tm_mon = (((v & 0x10) >> 4) * 10) + (v & 0x0F);
+	tm->tm_mon--;
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_YEAR_R);
+	tm->tm_year = (((v & 0xF0) >> 4) * 10) + (v & 0x0F);
+	tm->tm_year += 100;
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	v = moxart_rtc_read_register(dev, GPIO_RTC_DAY_R);
+	tm->tm_wday = (v & 0x0f) - 1;
+	tm->tm_yday = day_of_year[tm->tm_mon];
+	tm->tm_yday += (tm->tm_mday - 1);
+	if (tm->tm_mon >= 2) {
+		if (!(tm->tm_year % 4) && (tm->tm_year % 100))
+			tm->tm_yday++;
+	}
+
+	tm->tm_isdst = 0;
+
+	spin_unlock_irq(&moxart_rtc->rtc_lock);
+
+	return 0;
+}
+
+static const struct rtc_class_ops moxart_rtc_ops = {
+	.read_time	= moxart_rtc_read_time,
+	.set_time	= moxart_rtc_set_time,
+};
+
+static int moxart_rtc_probe(struct platform_device *pdev)
+{
+	struct moxart_rtc *moxart_rtc;
+	int ret = 0;
+
+	moxart_rtc = devm_kzalloc(&pdev->dev, sizeof(*moxart_rtc), GFP_KERNEL);
+	if (!moxart_rtc)
+		return -ENOMEM;
+
+	moxart_rtc->gpio_data = of_get_named_gpio(pdev->dev.of_node,
+						  "gpio-rtc-data", 0);
+	if (!gpio_is_valid(moxart_rtc->gpio_data)) {
+		dev_err(&pdev->dev, "invalid gpio (data): %d\n",
+			moxart_rtc->gpio_data);
+		return moxart_rtc->gpio_data;
+	}
+
+	moxart_rtc->gpio_sclk = of_get_named_gpio(pdev->dev.of_node,
+						  "gpio-rtc-sclk", 0);
+	if (!gpio_is_valid(moxart_rtc->gpio_sclk)) {
+		dev_err(&pdev->dev, "invalid gpio (sclk): %d\n",
+			moxart_rtc->gpio_sclk);
+		return moxart_rtc->gpio_sclk;
+	}
+
+	moxart_rtc->gpio_reset = of_get_named_gpio(pdev->dev.of_node,
+						   "gpio-rtc-reset", 0);
+	if (!gpio_is_valid(moxart_rtc->gpio_reset)) {
+		dev_err(&pdev->dev, "invalid gpio (reset): %d\n",
+			moxart_rtc->gpio_reset);
+		return moxart_rtc->gpio_reset;
+	}
+
+	spin_lock_init(&moxart_rtc->rtc_lock);
+	platform_set_drvdata(pdev, moxart_rtc);
+
+	ret = devm_gpio_request(&pdev->dev, moxart_rtc->gpio_data, "rtc_data");
+	if (ret) {
+		dev_err(&pdev->dev, "can't get rtc_data gpio\n");
+		return ret;
+	}
+
+	ret = devm_gpio_request_one(&pdev->dev, moxart_rtc->gpio_sclk,
+				    GPIOF_DIR_OUT, "rtc_sclk");
+	if (ret) {
+		dev_err(&pdev->dev, "can't get rtc_sclk gpio\n");
+		return ret;
+	}
+
+	ret = devm_gpio_request_one(&pdev->dev, moxart_rtc->gpio_reset,
+				    GPIOF_DIR_OUT, "rtc_reset");
+	if (ret) {
+		dev_err(&pdev->dev, "can't get rtc_reset gpio\n");
+		return ret;
+	}
+
+	moxart_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+						   &moxart_rtc_ops,
+						   THIS_MODULE);
+	if (IS_ERR(moxart_rtc->rtc)) {
+		dev_err(&pdev->dev, "devm_rtc_device_register failed\n");
+		return PTR_ERR(moxart_rtc->rtc);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id moxart_rtc_match[] = {
+	{ .compatible = "moxa,moxart-rtc" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, moxart_rtc_match);
+
+static struct platform_driver moxart_rtc_driver = {
+	.probe	= moxart_rtc_probe,
+	.driver	= {
+		.name		= "moxart-rtc",
+		.of_match_table	= moxart_rtc_match,
+	},
+};
+module_platform_driver(moxart_rtc_driver);
+
+MODULE_DESCRIPTION("MOXART RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mpc5121.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mpc5121.c
new file mode 100644
index 0000000..4ca4daa
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mpc5121.c
@@ -0,0 +1,424 @@
+/*
+ * Real-time clock driver for MPC5121
+ *
+ * Copyright 2007, Domen Puncer <domen.puncer@telargo.com>
+ * Copyright 2008, Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright 2011, Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+struct mpc5121_rtc_regs {
+	u8 set_time;		/* RTC + 0x00 */
+	u8 hour_set;		/* RTC + 0x01 */
+	u8 minute_set;		/* RTC + 0x02 */
+	u8 second_set;		/* RTC + 0x03 */
+
+	u8 set_date;		/* RTC + 0x04 */
+	u8 month_set;		/* RTC + 0x05 */
+	u8 weekday_set;		/* RTC + 0x06 */
+	u8 date_set;		/* RTC + 0x07 */
+
+	u8 write_sw;		/* RTC + 0x08 */
+	u8 sw_set;		/* RTC + 0x09 */
+	u16 year_set;		/* RTC + 0x0a */
+
+	u8 alm_enable;		/* RTC + 0x0c */
+	u8 alm_hour_set;	/* RTC + 0x0d */
+	u8 alm_min_set;		/* RTC + 0x0e */
+	u8 int_enable;		/* RTC + 0x0f */
+
+	u8 reserved1;
+	u8 hour;		/* RTC + 0x11 */
+	u8 minute;		/* RTC + 0x12 */
+	u8 second;		/* RTC + 0x13 */
+
+	u8 month;		/* RTC + 0x14 */
+	u8 wday_mday;		/* RTC + 0x15 */
+	u16 year;		/* RTC + 0x16 */
+
+	u8 int_alm;		/* RTC + 0x18 */
+	u8 int_sw;		/* RTC + 0x19 */
+	u8 alm_status;		/* RTC + 0x1a */
+	u8 sw_minute;		/* RTC + 0x1b */
+
+	u8 bus_error_1;		/* RTC + 0x1c */
+	u8 int_day;		/* RTC + 0x1d */
+	u8 int_min;		/* RTC + 0x1e */
+	u8 int_sec;		/* RTC + 0x1f */
+
+	/*
+	 * target_time:
+	 *	intended to be used for hibernation but hibernation
+	 *	does not work on silicon rev 1.5 so use it for non-volatile
+	 *	storage of offset between the actual_time register and linux
+	 *	time
+	 */
+	u32 target_time;	/* RTC + 0x20 */
+	/*
+	 * actual_time:
+	 *	readonly time since VBAT_RTC was last connected
+	 */
+	u32 actual_time;	/* RTC + 0x24 */
+	u32 keep_alive;		/* RTC + 0x28 */
+};
+
+struct mpc5121_rtc_data {
+	unsigned irq;
+	unsigned irq_periodic;
+	struct mpc5121_rtc_regs __iomem *regs;
+	struct rtc_device *rtc;
+	struct rtc_wkalrm wkalarm;
+};
+
+/*
+ * Update second/minute/hour registers.
+ *
+ * This is just so alarm will work.
+ */
+static void mpc5121_rtc_update_smh(struct mpc5121_rtc_regs __iomem *regs,
+				   struct rtc_time *tm)
+{
+	out_8(&regs->second_set, tm->tm_sec);
+	out_8(&regs->minute_set, tm->tm_min);
+	out_8(&regs->hour_set, tm->tm_hour);
+
+	/* set time sequence */
+	out_8(&regs->set_time, 0x1);
+	out_8(&regs->set_time, 0x3);
+	out_8(&regs->set_time, 0x1);
+	out_8(&regs->set_time, 0x0);
+}
+
+static int mpc5121_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	unsigned long now;
+
+	/*
+	 * linux time is actual_time plus the offset saved in target_time
+	 */
+	now = in_be32(&regs->actual_time) + in_be32(&regs->target_time);
+
+	rtc_time_to_tm(now, tm);
+
+	/*
+	 * update second minute hour registers
+	 * so alarms will work
+	 */
+	mpc5121_rtc_update_smh(regs, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int ret;
+	unsigned long now;
+
+	/*
+	 * The actual_time register is read only so we write the offset
+	 * between it and linux time to the target_time register.
+	 */
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0)
+		out_be32(&regs->target_time, now - in_be32(&regs->actual_time));
+
+	/*
+	 * update second minute hour registers
+	 * so alarms will work
+	 */
+	mpc5121_rtc_update_smh(regs, tm);
+
+	return 0;
+}
+
+static int mpc5200_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int tmp;
+
+	tm->tm_sec = in_8(&regs->second);
+	tm->tm_min = in_8(&regs->minute);
+
+	/* 12 hour format? */
+	if (in_8(&regs->hour) & 0x20)
+		tm->tm_hour = (in_8(&regs->hour) >> 1) +
+			(in_8(&regs->hour) & 1 ? 12 : 0);
+	else
+		tm->tm_hour = in_8(&regs->hour);
+
+	tmp = in_8(&regs->wday_mday);
+	tm->tm_mday = tmp & 0x1f;
+	tm->tm_mon = in_8(&regs->month) - 1;
+	tm->tm_year = in_be16(&regs->year) - 1900;
+	tm->tm_wday = (tmp >> 5) % 7;
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_isdst = 0;
+
+	return 0;
+}
+
+static int mpc5200_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	mpc5121_rtc_update_smh(regs, tm);
+
+	/* date */
+	out_8(&regs->month_set, tm->tm_mon + 1);
+	out_8(&regs->weekday_set, tm->tm_wday ? tm->tm_wday : 7);
+	out_8(&regs->date_set, tm->tm_mday);
+	out_be16(&regs->year_set, tm->tm_year + 1900);
+
+	/* set date sequence */
+	out_8(&regs->set_date, 0x1);
+	out_8(&regs->set_date, 0x3);
+	out_8(&regs->set_date, 0x1);
+	out_8(&regs->set_date, 0x0);
+
+	return 0;
+}
+
+static int mpc5121_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	*alarm = rtc->wkalarm;
+
+	alarm->pending = in_8(&regs->alm_status);
+
+	return 0;
+}
+
+static int mpc5121_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	/*
+	 * the alarm has no seconds so deal with it
+	 */
+	if (alarm->time.tm_sec) {
+		alarm->time.tm_sec = 0;
+		alarm->time.tm_min++;
+		if (alarm->time.tm_min >= 60) {
+			alarm->time.tm_min = 0;
+			alarm->time.tm_hour++;
+			if (alarm->time.tm_hour >= 24)
+				alarm->time.tm_hour = 0;
+		}
+	}
+
+	alarm->time.tm_mday = -1;
+	alarm->time.tm_mon = -1;
+	alarm->time.tm_year = -1;
+
+	out_8(&regs->alm_min_set, alarm->time.tm_min);
+	out_8(&regs->alm_hour_set, alarm->time.tm_hour);
+
+	out_8(&regs->alm_enable, alarm->enabled);
+
+	rtc->wkalarm = *alarm;
+	return 0;
+}
+
+static irqreturn_t mpc5121_rtc_handler(int irq, void *dev)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata((struct device *)dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	if (in_8(&regs->int_alm)) {
+		/* acknowledge and clear status */
+		out_8(&regs->int_alm, 1);
+		out_8(&regs->alm_status, 1);
+
+		rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t mpc5121_rtc_handler_upd(int irq, void *dev)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata((struct device *)dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	if (in_8(&regs->int_sec) && (in_8(&regs->int_enable) & 0x1)) {
+		/* acknowledge */
+		out_8(&regs->int_sec, 1);
+
+		rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_UF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int mpc5121_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int val;
+
+	if (enabled)
+		val = 1;
+	else
+		val = 0;
+
+	out_8(&regs->alm_enable, val);
+	rtc->wkalarm.enabled = val;
+
+	return 0;
+}
+
+static const struct rtc_class_ops mpc5121_rtc_ops = {
+	.read_time = mpc5121_rtc_read_time,
+	.set_time = mpc5121_rtc_set_time,
+	.read_alarm = mpc5121_rtc_read_alarm,
+	.set_alarm = mpc5121_rtc_set_alarm,
+	.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
+};
+
+static const struct rtc_class_ops mpc5200_rtc_ops = {
+	.read_time = mpc5200_rtc_read_time,
+	.set_time = mpc5200_rtc_set_time,
+	.read_alarm = mpc5121_rtc_read_alarm,
+	.set_alarm = mpc5121_rtc_set_alarm,
+	.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
+};
+
+static int mpc5121_rtc_probe(struct platform_device *op)
+{
+	struct mpc5121_rtc_data *rtc;
+	int err = 0;
+
+	rtc = devm_kzalloc(&op->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->regs = of_iomap(op->dev.of_node, 0);
+	if (!rtc->regs) {
+		dev_err(&op->dev, "%s: couldn't map io space\n", __func__);
+		return -ENOSYS;
+	}
+
+	device_init_wakeup(&op->dev, 1);
+
+	platform_set_drvdata(op, rtc);
+
+	rtc->irq = irq_of_parse_and_map(op->dev.of_node, 1);
+	err = request_irq(rtc->irq, mpc5121_rtc_handler, 0,
+						"mpc5121-rtc", &op->dev);
+	if (err) {
+		dev_err(&op->dev, "%s: could not request irq: %i\n",
+							__func__, rtc->irq);
+		goto out_dispose;
+	}
+
+	rtc->irq_periodic = irq_of_parse_and_map(op->dev.of_node, 0);
+	err = request_irq(rtc->irq_periodic, mpc5121_rtc_handler_upd,
+				0, "mpc5121-rtc_upd", &op->dev);
+	if (err) {
+		dev_err(&op->dev, "%s: could not request irq: %i\n",
+						__func__, rtc->irq_periodic);
+		goto out_dispose2;
+	}
+
+	if (of_device_is_compatible(op->dev.of_node, "fsl,mpc5121-rtc")) {
+		u32 ka;
+		ka = in_be32(&rtc->regs->keep_alive);
+		if (ka & 0x02) {
+			dev_warn(&op->dev,
+				"mpc5121-rtc: Battery or oscillator failure!\n");
+			out_be32(&rtc->regs->keep_alive, ka);
+		}
+
+		rtc->rtc = devm_rtc_device_register(&op->dev, "mpc5121-rtc",
+						&mpc5121_rtc_ops, THIS_MODULE);
+	} else {
+		rtc->rtc = devm_rtc_device_register(&op->dev, "mpc5200-rtc",
+						&mpc5200_rtc_ops, THIS_MODULE);
+	}
+
+	if (IS_ERR(rtc->rtc)) {
+		err = PTR_ERR(rtc->rtc);
+		goto out_free_irq;
+	}
+	rtc->rtc->uie_unsupported = 1;
+
+	return 0;
+
+out_free_irq:
+	free_irq(rtc->irq_periodic, &op->dev);
+out_dispose2:
+	irq_dispose_mapping(rtc->irq_periodic);
+	free_irq(rtc->irq, &op->dev);
+out_dispose:
+	irq_dispose_mapping(rtc->irq);
+	iounmap(rtc->regs);
+
+	return err;
+}
+
+static int mpc5121_rtc_remove(struct platform_device *op)
+{
+	struct mpc5121_rtc_data *rtc = platform_get_drvdata(op);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	/* disable interrupt, so there are no nasty surprises */
+	out_8(&regs->alm_enable, 0);
+	out_8(&regs->int_enable, in_8(&regs->int_enable) & ~0x1);
+
+	iounmap(rtc->regs);
+	free_irq(rtc->irq, &op->dev);
+	free_irq(rtc->irq_periodic, &op->dev);
+	irq_dispose_mapping(rtc->irq);
+	irq_dispose_mapping(rtc->irq_periodic);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mpc5121_rtc_match[] = {
+	{ .compatible = "fsl,mpc5121-rtc", },
+	{ .compatible = "fsl,mpc5200-rtc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc5121_rtc_match);
+#endif
+
+static struct platform_driver mpc5121_rtc_driver = {
+	.driver = {
+		.name = "mpc5121-rtc",
+		.of_match_table = of_match_ptr(mpc5121_rtc_match),
+	},
+	.probe = mpc5121_rtc_probe,
+	.remove = mpc5121_rtc_remove,
+};
+
+module_platform_driver(mpc5121_rtc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Rigby <jcrigby@gmail.com>");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mrst.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mrst.c
new file mode 100644
index 0000000..7334c44
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mrst.c
@@ -0,0 +1,537 @@
+/*
+ * rtc-mrst.c: Driver for Moorestown virtual RTC
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *	   Feng Tang (feng.tang@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based upon drivers/rtc/rtc-cmos.c
+ */
+
+/*
+ * Note:
+ *  * vRTC only supports binary mode and 24H mode
+ *  * vRTC only support PIE and AIE, no UIE, and its PIE only happens
+ *    at 23:59:59pm everyday, no support for adjustable frequency
+ *  * Alarm function is also limited to hr/min/sec.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+
+#include <asm/intel_scu_ipc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+
+struct mrst_rtc {
+	struct rtc_device	*rtc;
+	struct device		*dev;
+	int			irq;
+	struct resource		*iomem;
+
+	u8			enabled_wake;
+	u8			suspend_ctrl;
+};
+
+static const char driver_name[] = "rtc_mrst";
+
+#define	RTC_IRQMASK	(RTC_PF | RTC_AF)
+
+static inline int is_intr(u8 rtc_intr)
+{
+	if (!(rtc_intr & RTC_IRQF))
+		return 0;
+	return rtc_intr & RTC_IRQMASK;
+}
+
+static inline unsigned char vrtc_is_updating(void)
+{
+	unsigned char uip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return uip;
+}
+
+/*
+ * rtc_time's year contains the increment over 1900, but vRTC's YEAR
+ * register can't be programmed to value larger than 0x64, so vRTC
+ * driver chose to use 1972 (1970 is UNIX time start point) as the base,
+ * and does the translation at read/write time.
+ *
+ * Why not just use 1970 as the offset? it's because using 1972 will
+ * make it consistent in leap year setting for both vrtc and low-level
+ * physical rtc devices. Then why not use 1960 as the offset? If we use
+ * 1960, for a device's first use, its YEAR register is 0 and the system
+ * year will be parsed as 1960 which is not a valid UNIX time and will
+ * cause many applications to fail mysteriously.
+ */
+static int mrst_read_time(struct device *dev, struct rtc_time *time)
+{
+	unsigned long flags;
+
+	if (vrtc_is_updating())
+		mdelay(20);
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	time->tm_sec = vrtc_cmos_read(RTC_SECONDS);
+	time->tm_min = vrtc_cmos_read(RTC_MINUTES);
+	time->tm_hour = vrtc_cmos_read(RTC_HOURS);
+	time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+	time->tm_mon = vrtc_cmos_read(RTC_MONTH);
+	time->tm_year = vrtc_cmos_read(RTC_YEAR);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* Adjust for the 1972/1900 */
+	time->tm_year += 72;
+	time->tm_mon--;
+	return rtc_valid_tm(time);
+}
+
+static int mrst_set_time(struct device *dev, struct rtc_time *time)
+{
+	int ret;
+	unsigned long flags;
+	unsigned char mon, day, hrs, min, sec;
+	unsigned int yrs;
+
+	yrs = time->tm_year;
+	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
+	day = time->tm_mday;
+	hrs = time->tm_hour;
+	min = time->tm_min;
+	sec = time->tm_sec;
+
+	if (yrs < 72 || yrs > 138)
+		return -EINVAL;
+	yrs -= 72;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	vrtc_cmos_write(yrs, RTC_YEAR);
+	vrtc_cmos_write(mon, RTC_MONTH);
+	vrtc_cmos_write(day, RTC_DAY_OF_MONTH);
+	vrtc_cmos_write(hrs, RTC_HOURS);
+	vrtc_cmos_write(min, RTC_MINUTES);
+	vrtc_cmos_write(sec, RTC_SECONDS);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME);
+	return ret;
+}
+
+static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char rtc_control;
+
+	if (mrst->irq <= 0)
+		return -EIO;
+
+	/* vRTC only supports binary mode */
+	spin_lock_irq(&rtc_lock);
+	t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
+	t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM);
+	t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM);
+
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	t->enabled = !!(rtc_control & RTC_AIE);
+	t->pending = 0;
+
+	return 0;
+}
+
+static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control)
+{
+	unsigned char	rtc_intr;
+
+	/*
+	 * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+	 * allegedly some older rtcs need that to handle irqs properly
+	 */
+	rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS);
+	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	if (is_intr(rtc_intr))
+		rtc_update_irq(mrst->rtc, 1, rtc_intr);
+}
+
+static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	/*
+	 * Flush any pending IRQ status, notably for update irqs,
+	 * before we enable new IRQs
+	 */
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	mrst_checkintr(mrst, rtc_control);
+
+	rtc_control |= mask;
+	vrtc_cmos_write(rtc_control, RTC_CONTROL);
+
+	mrst_checkintr(mrst, rtc_control);
+}
+
+static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	rtc_control &= ~mask;
+	vrtc_cmos_write(rtc_control, RTC_CONTROL);
+	mrst_checkintr(mrst, rtc_control);
+}
+
+static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char hrs, min, sec;
+	int ret = 0;
+
+	if (!mrst->irq)
+		return -EIO;
+
+	hrs = t->time.tm_hour;
+	min = t->time.tm_min;
+	sec = t->time.tm_sec;
+
+	spin_lock_irq(&rtc_lock);
+	/* Next rtc irq must not be from previous alarm setting */
+	mrst_irq_disable(mrst, RTC_AIE);
+
+	/* Update alarm */
+	vrtc_cmos_write(hrs, RTC_HOURS_ALARM);
+	vrtc_cmos_write(min, RTC_MINUTES_ALARM);
+	vrtc_cmos_write(sec, RTC_SECONDS_ALARM);
+
+	spin_unlock_irq(&rtc_lock);
+
+	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM);
+	if (ret)
+		return ret;
+
+	spin_lock_irq(&rtc_lock);
+	if (t->enabled)
+		mrst_irq_enable(mrst, RTC_AIE);
+
+	spin_unlock_irq(&rtc_lock);
+
+	return 0;
+}
+
+/* Currently, the vRTC doesn't support UIE ON/OFF */
+static int mrst_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	if (enabled)
+		mrst_irq_enable(mrst, RTC_AIE);
+	else
+		mrst_irq_disable(mrst, RTC_AIE);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return 0;
+}
+
+
+#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
+
+static int mrst_procfs(struct device *dev, struct seq_file *seq)
+{
+	unsigned char	rtc_control, valid;
+
+	spin_lock_irq(&rtc_lock);
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	valid = vrtc_cmos_read(RTC_VALID);
+	spin_unlock_irq(&rtc_lock);
+
+	seq_printf(seq,
+		   "periodic_IRQ\t: %s\n"
+		   "alarm\t\t: %s\n"
+		   "BCD\t\t: no\n"
+		   "periodic_freq\t: daily (not adjustable)\n",
+		   (rtc_control & RTC_PIE) ? "on" : "off",
+		   (rtc_control & RTC_AIE) ? "on" : "off");
+
+	return 0;
+}
+
+#else
+#define	mrst_procfs	NULL
+#endif
+
+static const struct rtc_class_ops mrst_rtc_ops = {
+	.read_time	= mrst_read_time,
+	.set_time	= mrst_set_time,
+	.read_alarm	= mrst_read_alarm,
+	.set_alarm	= mrst_set_alarm,
+	.proc		= mrst_procfs,
+	.alarm_irq_enable = mrst_rtc_alarm_irq_enable,
+};
+
+static struct mrst_rtc	mrst_rtc;
+
+/*
+ * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in
+ * Reg B, so no need for this driver to clear it
+ */
+static irqreturn_t mrst_rtc_irq(int irq, void *p)
+{
+	u8 irqstat;
+
+	spin_lock(&rtc_lock);
+	/* This read will clear all IRQ flags inside Reg C */
+	irqstat = vrtc_cmos_read(RTC_INTR_FLAGS);
+	spin_unlock(&rtc_lock);
+
+	irqstat &= RTC_IRQMASK | RTC_IRQF;
+	if (is_intr(irqstat)) {
+		rtc_update_irq(p, 1, irqstat);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static int vrtc_mrst_do_probe(struct device *dev, struct resource *iomem,
+			      int rtc_irq)
+{
+	int retval = 0;
+	unsigned char rtc_control;
+
+	/* There can be only one ... */
+	if (mrst_rtc.dev)
+		return -EBUSY;
+
+	if (!iomem)
+		return -ENODEV;
+
+	iomem = request_mem_region(iomem->start, resource_size(iomem),
+				   driver_name);
+	if (!iomem) {
+		dev_dbg(dev, "i/o mem already in use.\n");
+		return -EBUSY;
+	}
+
+	mrst_rtc.irq = rtc_irq;
+	mrst_rtc.iomem = iomem;
+	mrst_rtc.dev = dev;
+	dev_set_drvdata(dev, &mrst_rtc);
+
+	mrst_rtc.rtc = rtc_device_register(driver_name, dev,
+				&mrst_rtc_ops, THIS_MODULE);
+	if (IS_ERR(mrst_rtc.rtc)) {
+		retval = PTR_ERR(mrst_rtc.rtc);
+		goto cleanup0;
+	}
+
+	rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));
+
+	spin_lock_irq(&rtc_lock);
+	mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE);
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))
+		dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n");
+
+	if (rtc_irq) {
+		retval = request_irq(rtc_irq, mrst_rtc_irq,
+				0, dev_name(&mrst_rtc.rtc->dev),
+				mrst_rtc.rtc);
+		if (retval < 0) {
+			dev_dbg(dev, "IRQ %d is already in use, err %d\n",
+				rtc_irq, retval);
+			goto cleanup1;
+		}
+	}
+	dev_dbg(dev, "initialised\n");
+	return 0;
+
+cleanup1:
+	rtc_device_unregister(mrst_rtc.rtc);
+cleanup0:
+	mrst_rtc.dev = NULL;
+	release_mem_region(iomem->start, resource_size(iomem));
+	dev_err(dev, "rtc-mrst: unable to initialise\n");
+	return retval;
+}
+
+static void rtc_mrst_do_shutdown(void)
+{
+	spin_lock_irq(&rtc_lock);
+	mrst_irq_disable(&mrst_rtc, RTC_IRQMASK);
+	spin_unlock_irq(&rtc_lock);
+}
+
+static void rtc_mrst_do_remove(struct device *dev)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	struct resource *iomem;
+
+	rtc_mrst_do_shutdown();
+
+	if (mrst->irq)
+		free_irq(mrst->irq, mrst->rtc);
+
+	rtc_device_unregister(mrst->rtc);
+	mrst->rtc = NULL;
+
+	iomem = mrst->iomem;
+	release_mem_region(iomem->start, resource_size(iomem));
+	mrst->iomem = NULL;
+
+	mrst->dev = NULL;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mrst_suspend(struct device *dev)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char	tmp;
+
+	/* Only the alarm might be a wakeup event source */
+	spin_lock_irq(&rtc_lock);
+	mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL);
+	if (tmp & (RTC_PIE | RTC_AIE)) {
+		unsigned char	mask;
+
+		if (device_may_wakeup(dev))
+			mask = RTC_IRQMASK & ~RTC_AIE;
+		else
+			mask = RTC_IRQMASK;
+		tmp &= ~mask;
+		vrtc_cmos_write(tmp, RTC_CONTROL);
+
+		mrst_checkintr(mrst, tmp);
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	if (tmp & RTC_AIE) {
+		mrst->enabled_wake = 1;
+		enable_irq_wake(mrst->irq);
+	}
+
+	dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n",
+			(tmp & RTC_AIE) ? ", alarm may wake" : "",
+			tmp);
+
+	return 0;
+}
+
+/*
+ * We want RTC alarms to wake us from the deep power saving state
+ */
+static inline int mrst_poweroff(struct device *dev)
+{
+	return mrst_suspend(dev);
+}
+
+static int mrst_resume(struct device *dev)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char tmp = mrst->suspend_ctrl;
+
+	/* Re-enable any irqs previously active */
+	if (tmp & RTC_IRQMASK) {
+		unsigned char	mask;
+
+		if (mrst->enabled_wake) {
+			disable_irq_wake(mrst->irq);
+			mrst->enabled_wake = 0;
+		}
+
+		spin_lock_irq(&rtc_lock);
+		do {
+			vrtc_cmos_write(tmp, RTC_CONTROL);
+
+			mask = vrtc_cmos_read(RTC_INTR_FLAGS);
+			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+			if (!is_intr(mask))
+				break;
+
+			rtc_update_irq(mrst->rtc, 1, mask);
+			tmp &= ~RTC_AIE;
+		} while (mask & RTC_AIE);
+		spin_unlock_irq(&rtc_lock);
+	}
+
+	dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mrst_pm_ops, mrst_suspend, mrst_resume);
+#define MRST_PM_OPS (&mrst_pm_ops)
+
+#else
+#define MRST_PM_OPS NULL
+
+static inline int mrst_poweroff(struct device *dev)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+static int vrtc_mrst_platform_probe(struct platform_device *pdev)
+{
+	return vrtc_mrst_do_probe(&pdev->dev,
+			platform_get_resource(pdev, IORESOURCE_MEM, 0),
+			platform_get_irq(pdev, 0));
+}
+
+static int vrtc_mrst_platform_remove(struct platform_device *pdev)
+{
+	rtc_mrst_do_remove(&pdev->dev);
+	return 0;
+}
+
+static void vrtc_mrst_platform_shutdown(struct platform_device *pdev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev))
+		return;
+
+	rtc_mrst_do_shutdown();
+}
+
+MODULE_ALIAS("platform:vrtc_mrst");
+
+static struct platform_driver vrtc_mrst_platform_driver = {
+	.probe		= vrtc_mrst_platform_probe,
+	.remove		= vrtc_mrst_platform_remove,
+	.shutdown	= vrtc_mrst_platform_shutdown,
+	.driver = {
+		.name	= driver_name,
+		.pm	= MRST_PM_OPS,
+	}
+};
+
+module_platform_driver(vrtc_mrst_platform_driver);
+
+MODULE_AUTHOR("Jacob Pan; Feng Tang");
+MODULE_DESCRIPTION("Driver for Moorestown virtual RTC");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-msm6242.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-msm6242.c
new file mode 100644
index 0000000..c981301
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-msm6242.c
@@ -0,0 +1,239 @@
+/*
+ *  Oki MSM6242 RTC Driver
+ *
+ *  Copyright 2009 Geert Uytterhoeven
+ *
+ *  Based on the A2000 TOD code in arch/m68k/amiga/config.c
+ *  Copyright (C) 1993 Hamish Macdonald
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+
+enum {
+	MSM6242_SECOND1		= 0x0,	/* 1-second digit register */
+	MSM6242_SECOND10	= 0x1,	/* 10-second digit register */
+	MSM6242_MINUTE1		= 0x2,	/* 1-minute digit register */
+	MSM6242_MINUTE10	= 0x3,	/* 10-minute digit register */
+	MSM6242_HOUR1		= 0x4,	/* 1-hour digit register */
+	MSM6242_HOUR10		= 0x5,	/* PM/AM, 10-hour digit register */
+	MSM6242_DAY1		= 0x6,	/* 1-day digit register */
+	MSM6242_DAY10		= 0x7,	/* 10-day digit register */
+	MSM6242_MONTH1		= 0x8,	/* 1-month digit register */
+	MSM6242_MONTH10		= 0x9,	/* 10-month digit register */
+	MSM6242_YEAR1		= 0xa,	/* 1-year digit register */
+	MSM6242_YEAR10		= 0xb,	/* 10-year digit register */
+	MSM6242_WEEK		= 0xc,	/* Week register */
+	MSM6242_CD		= 0xd,	/* Control Register D */
+	MSM6242_CE		= 0xe,	/* Control Register E */
+	MSM6242_CF		= 0xf,	/* Control Register F */
+};
+
+#define MSM6242_HOUR10_AM	(0 << 2)
+#define MSM6242_HOUR10_PM	(1 << 2)
+#define MSM6242_HOUR10_HR_MASK	(3 << 0)
+
+#define MSM6242_WEEK_SUNDAY	0
+#define MSM6242_WEEK_MONDAY	1
+#define MSM6242_WEEK_TUESDAY	2
+#define MSM6242_WEEK_WEDNESDAY	3
+#define MSM6242_WEEK_THURSDAY	4
+#define MSM6242_WEEK_FRIDAY	5
+#define MSM6242_WEEK_SATURDAY	6
+
+#define MSM6242_CD_30_S_ADJ	(1 << 3)	/* 30-second adjustment */
+#define MSM6242_CD_IRQ_FLAG	(1 << 2)
+#define MSM6242_CD_BUSY		(1 << 1)
+#define MSM6242_CD_HOLD		(1 << 0)
+
+#define MSM6242_CE_T_MASK	(3 << 2)
+#define MSM6242_CE_T_64HZ	(0 << 2)	/* period 1/64 second */
+#define MSM6242_CE_T_1HZ	(1 << 2)	/* period 1 second */
+#define MSM6242_CE_T_1MINUTE	(2 << 2)	/* period 1 minute */
+#define MSM6242_CE_T_1HOUR	(3 << 2)	/* period 1 hour */
+
+#define MSM6242_CE_ITRPT_STND	(1 << 1)
+#define MSM6242_CE_MASK		(1 << 0)	/* STD.P output control */
+
+#define MSM6242_CF_TEST		(1 << 3)
+#define MSM6242_CF_12H		(0 << 2)
+#define MSM6242_CF_24H		(1 << 2)
+#define MSM6242_CF_STOP		(1 << 1)
+#define MSM6242_CF_REST		(1 << 0)	/* reset */
+
+
+struct msm6242_priv {
+	u32 __iomem *regs;
+	struct rtc_device *rtc;
+};
+
+static inline unsigned int msm6242_read(struct msm6242_priv *priv,
+				       unsigned int reg)
+{
+	return __raw_readl(&priv->regs[reg]) & 0xf;
+}
+
+static inline void msm6242_write(struct msm6242_priv *priv, unsigned int val,
+				unsigned int reg)
+{
+	__raw_writel(val, &priv->regs[reg]);
+}
+
+static inline void msm6242_set(struct msm6242_priv *priv, unsigned int val,
+			       unsigned int reg)
+{
+	msm6242_write(priv, msm6242_read(priv, reg) | val, reg);
+}
+
+static inline void msm6242_clear(struct msm6242_priv *priv, unsigned int val,
+				 unsigned int reg)
+{
+	msm6242_write(priv, msm6242_read(priv, reg) & ~val, reg);
+}
+
+static void msm6242_lock(struct msm6242_priv *priv)
+{
+	int cnt = 5;
+
+	msm6242_set(priv, MSM6242_CD_HOLD, MSM6242_CD);
+
+	while ((msm6242_read(priv, MSM6242_CD) & MSM6242_CD_BUSY) && cnt) {
+		msm6242_clear(priv, MSM6242_CD_HOLD, MSM6242_CD);
+		udelay(70);
+		msm6242_set(priv, MSM6242_CD_HOLD, MSM6242_CD);
+		cnt--;
+	}
+
+	if (!cnt)
+		pr_warn("timed out waiting for RTC (0x%x)\n",
+			msm6242_read(priv, MSM6242_CD));
+}
+
+static void msm6242_unlock(struct msm6242_priv *priv)
+{
+	msm6242_clear(priv, MSM6242_CD_HOLD, MSM6242_CD);
+}
+
+static int msm6242_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msm6242_priv *priv = dev_get_drvdata(dev);
+
+	msm6242_lock(priv);
+
+	tm->tm_sec  = msm6242_read(priv, MSM6242_SECOND10) * 10 +
+		      msm6242_read(priv, MSM6242_SECOND1);
+	tm->tm_min  = msm6242_read(priv, MSM6242_MINUTE10) * 10 +
+		      msm6242_read(priv, MSM6242_MINUTE1);
+	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10) &
+		       MSM6242_HOUR10_HR_MASK) * 10 +
+		      msm6242_read(priv, MSM6242_HOUR1);
+	tm->tm_mday = msm6242_read(priv, MSM6242_DAY10) * 10 +
+		      msm6242_read(priv, MSM6242_DAY1);
+	tm->tm_wday = msm6242_read(priv, MSM6242_WEEK);
+	tm->tm_mon  = msm6242_read(priv, MSM6242_MONTH10) * 10 +
+		      msm6242_read(priv, MSM6242_MONTH1) - 1;
+	tm->tm_year = msm6242_read(priv, MSM6242_YEAR10) * 10 +
+		      msm6242_read(priv, MSM6242_YEAR1);
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	if (!(msm6242_read(priv, MSM6242_CF) & MSM6242_CF_24H)) {
+		unsigned int pm = msm6242_read(priv, MSM6242_HOUR10) &
+				  MSM6242_HOUR10_PM;
+		if (!pm && tm->tm_hour == 12)
+			tm->tm_hour = 0;
+		else if (pm && tm->tm_hour != 12)
+			tm->tm_hour += 12;
+	}
+
+	msm6242_unlock(priv);
+
+	return rtc_valid_tm(tm);
+}
+
+static int msm6242_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msm6242_priv *priv = dev_get_drvdata(dev);
+
+	msm6242_lock(priv);
+
+	msm6242_write(priv, tm->tm_sec / 10, MSM6242_SECOND10);
+	msm6242_write(priv, tm->tm_sec % 10, MSM6242_SECOND1);
+	msm6242_write(priv, tm->tm_min / 10, MSM6242_MINUTE10);
+	msm6242_write(priv, tm->tm_min % 10, MSM6242_MINUTE1);
+	if (msm6242_read(priv, MSM6242_CF) & MSM6242_CF_24H)
+		msm6242_write(priv, tm->tm_hour / 10, MSM6242_HOUR10);
+	else if (tm->tm_hour >= 12)
+		msm6242_write(priv, MSM6242_HOUR10_PM + (tm->tm_hour - 12) / 10,
+			      MSM6242_HOUR10);
+	else
+		msm6242_write(priv, tm->tm_hour / 10, MSM6242_HOUR10);
+	msm6242_write(priv, tm->tm_hour % 10, MSM6242_HOUR1);
+	msm6242_write(priv, tm->tm_mday / 10, MSM6242_DAY10);
+	msm6242_write(priv, tm->tm_mday % 10, MSM6242_DAY1);
+	if (tm->tm_wday != -1)
+		msm6242_write(priv, tm->tm_wday, MSM6242_WEEK);
+	msm6242_write(priv, (tm->tm_mon + 1) / 10, MSM6242_MONTH10);
+	msm6242_write(priv, (tm->tm_mon + 1) % 10, MSM6242_MONTH1);
+	if (tm->tm_year >= 100)
+		tm->tm_year -= 100;
+	msm6242_write(priv, tm->tm_year / 10, MSM6242_YEAR10);
+	msm6242_write(priv, tm->tm_year % 10, MSM6242_YEAR1);
+
+	msm6242_unlock(priv);
+	return 0;
+}
+
+static const struct rtc_class_ops msm6242_rtc_ops = {
+	.read_time	= msm6242_read_time,
+	.set_time	= msm6242_set_time,
+};
+
+static int __init msm6242_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct msm6242_priv *priv;
+	struct rtc_device *rtc;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!priv->regs)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	rtc = devm_rtc_device_register(&pdev->dev, "rtc-msm6242",
+				&msm6242_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	priv->rtc = rtc;
+	return 0;
+}
+
+static struct platform_driver msm6242_rtc_driver = {
+	.driver	= {
+		.name	= "rtc-msm6242",
+	},
+};
+
+module_platform_driver_probe(msm6242_rtc_driver, msm6242_rtc_probe);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Oki MSM6242 RTC driver");
+MODULE_ALIAS("platform:rtc-msm6242");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6358.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6358.c
new file mode 100644
index 0000000..670efdd
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6358.c
@@ -0,0 +1,973 @@
+/*
+ * Copyright (C) 2018 MediaTek, Inc.
+ * Author: Wilma Wu <wilma.wu@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/div64.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_wakeup.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/sched/clock.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/mfd/mt6358/core.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+/* For KPOC alarm */
+#include <linux/notifier.h>
+#include <linux/suspend.h>
+#include "../misc/mediatek/include/mt-plat/mtk_boot_common.h"
+
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define RTC_NAME	"mt-rtc"
+#define IPIMB
+
+
+/* we map HW YEA 0 (2000) to 1968 not 1970 because 2000 is the leap year */
+#define RTC_MIN_YEAR		1968
+#define RTC_BASE_YEAR		1900
+#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC			0
+#define RTC_OFFSET_MIN			1
+#define RTC_OFFSET_HOUR			2
+#define RTC_OFFSET_DOM			3
+#define RTC_OFFSET_DOW			4
+#define RTC_OFFSET_MTH			5
+#define RTC_OFFSET_YEAR			6
+#define RTC_OFFSET_COUNT		7
+
+#define RTC_DSN_ID				0x580
+#define RTC_BBPU				0x8
+#define RTC_IRQ_STA				0xa
+#define RTC_IRQ_EN				0xc
+#define RTC_AL_MASK				0x10
+#define RTC_TC_SEC				0x12
+#define RTC_AL_SEC				0x20
+#define RTC_AL_MIN				0x22
+#define RTC_AL_HOU				0x24
+#define RTC_AL_DOM				0x26
+#define RTC_AL_DOW				0x28
+#define RTC_AL_MTH				0x2a
+#define RTC_AL_YEA				0x2c
+#define RTC_OSC32CON			0x2e
+#define RTC_POWERKEY1			0x30
+#define RTC_POWERKEY2			0x32
+#define RTC_PDN1				0x34
+#define RTC_PDN2				0x36
+#define RTC_SPAR0				0x38
+#define RTC_SPAR1				0x3a
+#define RTC_PROT				0x3c
+#define RTC_WRTGR				0x42
+#define RTC_CON					0x44
+
+#define RTC_TC_SEC_MASK			0x3f
+#define RTC_TC_MIN_MASK			0x3f
+#define RTC_TC_HOU_MASK			0x1f
+#define RTC_TC_DOM_MASK			0x1f
+#define RTC_TC_DOW_MASK			0x7
+#define RTC_TC_MTH_MASK			0xf
+#define RTC_TC_YEA_MASK			0x7f
+
+#define RTC_AL_SEC_MASK			0x3f
+#define RTC_AL_MIN_MASK			0x3f
+#define RTC_AL_HOU_MASK			0x1f
+#define RTC_AL_DOM_MASK			0x1f
+#define RTC_AL_DOW_MASK			0x7
+#define RTC_AL_MTH_MASK			0xf
+#define RTC_AL_YEA_MASK			0x7f
+
+#define RTC_PWRON_SEC_SHIFT		0x0
+#define RTC_PWRON_MIN_SHIFT		0x0
+#define RTC_PWRON_HOU_SHIFT		0x6
+#define RTC_PWRON_DOM_SHIFT		0xb
+#define RTC_PWRON_MTH_SHIFT		0x0
+#define RTC_PWRON_YEA_SHIFT		0x8
+
+#define RTC_PWRON_SEC_MASK      (RTC_AL_SEC_MASK << RTC_PWRON_SEC_SHIFT)
+#define RTC_PWRON_MIN_MASK      (RTC_AL_MIN_MASK << RTC_PWRON_MIN_SHIFT)
+#define RTC_PWRON_HOU_MASK      (RTC_AL_HOU_MASK << RTC_PWRON_HOU_SHIFT)
+#define RTC_PWRON_DOM_MASK      (RTC_AL_DOM_MASK << RTC_PWRON_DOM_SHIFT)
+#define RTC_PWRON_MTH_MASK      (RTC_AL_MTH_MASK << RTC_PWRON_MTH_SHIFT)
+#define RTC_PWRON_YEA_MASK      (RTC_AL_YEA_MASK << RTC_PWRON_YEA_SHIFT)
+
+#define RTC_BBPU_KEY			0x4300
+#define RTC_BBPU_CBUSY			BIT(6)
+#define RTC_BBPU_RELOAD			BIT(5)
+#define RTC_BBPU_AUTO			BIT(3)
+#define RTC_BBPU_CLR			BIT(1)
+#define RTC_BBPU_PWREN			BIT(0)
+#define RTC_BBPU_AL_STA			BIT(7)
+#define RTC_BBPU_RESET_AL		BIT(3)
+#define RTC_BBPU_RESET_SPAR		BIT(2)
+
+#define RTC_AL_MASK_DOW			BIT(4)
+
+#define RTC_IRQ_EN_LP			BIT(3)
+#define RTC_IRQ_EN_ONESHOT		BIT(2)
+#define	RTC_IRQ_EN_AL			BIT(0)
+#define RTC_IRQ_EN_ONESHOT_AL   (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_IRQ_STA_LP			BIT(3)
+#define RTC_IRQ_STA_AL			BIT(0)
+
+#define RTC_PDN1_PWRON_TIME		BIT(7)
+#define RTC_PDN2_PWRON_LOGO		BIT(15)
+#define RTC_PDN2_PWRON_ALARM	BIT(4)
+
+
+static u16 rtc_alarm_reg[RTC_OFFSET_COUNT][3] = {
+	{RTC_AL_SEC, RTC_AL_SEC_MASK, 0},
+	{RTC_AL_MIN, RTC_AL_MIN_MASK, 0},
+	{RTC_AL_HOU, RTC_AL_HOU_MASK, 0},
+	{RTC_AL_DOM, RTC_AL_DOM_MASK, 0},
+	{RTC_AL_DOW, RTC_AL_DOW_MASK, 0},
+	{RTC_AL_MTH, RTC_AL_MTH_MASK, 0},
+	{RTC_AL_YEA, RTC_AL_YEA_MASK, 0},
+};
+
+static u16 rtc_pwron_reg[RTC_OFFSET_COUNT][3] = {
+	{RTC_SPAR0, RTC_PWRON_SEC_MASK, RTC_PWRON_SEC_SHIFT},
+	{RTC_SPAR1, RTC_PWRON_MIN_MASK, RTC_PWRON_MIN_SHIFT},
+	{RTC_SPAR1, RTC_PWRON_HOU_MASK, RTC_PWRON_HOU_SHIFT},
+	{RTC_SPAR1, RTC_PWRON_DOM_MASK, RTC_PWRON_DOM_SHIFT},
+	{0, 0, 0},
+	{RTC_PDN2, RTC_PWRON_MTH_MASK, RTC_PWRON_MTH_SHIFT},
+	{RTC_PDN2, RTC_PWRON_YEA_MASK, RTC_PWRON_YEA_SHIFT},
+};
+
+enum rtc_reg_set {
+	RTC_REG,
+	RTC_MASK,
+	RTC_SHIFT
+};
+
+struct mt6358_rtc {
+	struct device		*dev;
+	struct rtc_device	*rtc_dev;
+	spinlock_t	lock;
+	struct regmap		*regmap;
+	int			irq;
+	u32			addr_base;
+};
+static struct mt6358_rtc *mt_rtc;
+
+static int rtc_show_time;
+static int rtc_show_alarm = 1;
+static int apply_lpsd_solution;
+/*for KPOC alarm*/
+static bool rtc_pm_notifier_registered;
+static unsigned long rtc_pm_status;
+
+module_param(rtc_show_time, int, 0644);
+module_param(rtc_show_alarm, int, 0644);
+
+static int rtc_read(unsigned int reg, unsigned int *val)
+{
+	return regmap_read(mt_rtc->regmap, mt_rtc->addr_base + reg, val);
+}
+
+static int rtc_write(unsigned int reg, unsigned int val)
+{
+	return regmap_write(mt_rtc->regmap, mt_rtc->addr_base + reg, val);
+}
+
+static int rtc_update_bits(unsigned int reg,
+		       unsigned int mask, unsigned int val)
+{
+	return regmap_update_bits(mt_rtc->regmap,
+			mt_rtc->addr_base + reg, mask, val);
+}
+
+static int rtc_field_read(unsigned int reg,
+		       unsigned int mask, unsigned int shift, unsigned int *val)
+{
+	int ret;
+	unsigned int reg_val;
+
+	ret = rtc_read(reg, &reg_val);
+	if (ret != 0)
+		return ret;
+
+	reg_val &= mask;
+	reg_val >>= shift;
+	*val = reg_val;
+
+	return ret;
+}
+
+#define BULK_WRITE 0
+#define BULK_READ 1
+
+static int rtc_bulk_access(int mode, unsigned int reg, void *val,
+		     size_t val_count)
+{
+	if (mode == BULK_WRITE) {
+		return regmap_bulk_write(mt_rtc->regmap,
+				mt_rtc->addr_base + reg, val, val_count);
+	} else if (mode == BULK_READ) {
+		return regmap_bulk_read(mt_rtc->regmap,
+				mt_rtc->addr_base + reg, val, val_count);
+	} else
+		return -EPERM;
+}
+
+static int rtc_write_trigger(void)
+{
+	int ret, bbpu;
+	unsigned long long timeout = sched_clock() + 500000000;
+	u32 pwrkey1, pwrkey2, sec;
+
+	ret = rtc_write(RTC_WRTGR, 1);
+	if (ret < 0)
+		return ret;
+
+	do {
+		ret = rtc_read(RTC_BBPU, &bbpu);
+		if (ret < 0)
+			break;
+		if ((bbpu & RTC_BBPU_CBUSY) == 0)
+			break;
+		else if (sched_clock() > timeout) {
+			rtc_read(RTC_BBPU, &bbpu);
+			rtc_read(RTC_POWERKEY1, &pwrkey1);
+			rtc_read(RTC_POWERKEY2, &pwrkey2);
+			rtc_read(RTC_TC_SEC, &sec);
+			pr_err("%s, wait cbusy timeout, %x, %x, %x, %d\n",
+				__func__, bbpu, pwrkey1, pwrkey2, sec);
+			ret = -ETIMEDOUT;
+			break;
+		}
+	} while (1);
+
+	return ret;
+}
+
+static int mtk_rtc_read_time(struct rtc_time *tm)
+{
+	u16 data[RTC_OFFSET_COUNT];
+	int ret;
+	u32 sec;
+
+	do {
+
+		ret = rtc_bulk_access(BULK_READ, RTC_TC_SEC,
+					data, RTC_OFFSET_COUNT);
+		if (ret < 0)
+			goto exit;
+		tm->tm_sec = data[RTC_OFFSET_SEC] & RTC_TC_SEC_MASK;
+		tm->tm_min = data[RTC_OFFSET_MIN] & RTC_TC_MIN_MASK;
+		tm->tm_hour = data[RTC_OFFSET_HOUR] & RTC_TC_HOU_MASK;
+		tm->tm_mday = data[RTC_OFFSET_DOM] & RTC_TC_DOM_MASK;
+		tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_TC_MTH_MASK;
+		tm->tm_year = data[RTC_OFFSET_YEAR] & RTC_TC_YEA_MASK;
+
+		ret = rtc_read(RTC_TC_SEC, &sec);
+		if (ret < 0)
+			goto exit;
+
+	} while (sec < tm->tm_sec);
+
+	return ret;
+
+exit:
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static int mtk_rtc_set_alarm(struct rtc_time *tm)
+{
+	int ret, i;
+	u16 data[RTC_OFFSET_COUNT];
+
+	data[RTC_OFFSET_SEC] = tm->tm_sec & RTC_AL_SEC_MASK;
+	data[RTC_OFFSET_MIN] = tm->tm_min & RTC_AL_MIN_MASK;
+	data[RTC_OFFSET_HOUR] = tm->tm_hour & RTC_AL_HOU_MASK;
+	data[RTC_OFFSET_DOM] = tm->tm_mday & RTC_AL_DOM_MASK;
+	data[RTC_OFFSET_MTH] = tm->tm_mon & RTC_AL_MTH_MASK;
+	data[RTC_OFFSET_YEAR] = tm->tm_year & RTC_AL_YEA_MASK;
+
+	for (i = RTC_OFFSET_SEC; i < RTC_OFFSET_COUNT; i++) {
+		if (i == RTC_OFFSET_DOW)
+			continue;
+		ret = rtc_update_bits(rtc_alarm_reg[i][RTC_REG],
+					rtc_alarm_reg[i][RTC_MASK], data[i]);
+		if (ret < 0)
+			goto exit;
+	}
+	ret = rtc_write(RTC_AL_MASK, RTC_AL_MASK_DOW);	/* mask DOW */
+	if (ret < 0)
+		goto exit;
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+
+	ret = rtc_update_bits(RTC_IRQ_EN,
+						  RTC_IRQ_EN_ONESHOT_AL,
+						  RTC_IRQ_EN_ONESHOT_AL);
+	if (ret < 0)
+		goto exit;
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+
+	return ret;
+exit:
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+bool mtk_rtc_is_pwron_alarm(struct rtc_time *nowtm, struct rtc_time *tm)
+{
+	u32 pdn1;
+	u32 data[RTC_OFFSET_COUNT];
+	int ret, i;
+
+	ret = rtc_read(RTC_PDN1, &pdn1);
+	if (ret < 0)
+		goto exit;
+	pr_notice("pdn1 = 0x%4x\n", pdn1);
+
+	if (pdn1 & RTC_PDN1_PWRON_TIME) {	/* power-on time is available */
+
+		ret = mtk_rtc_read_time(nowtm);
+		if (ret < 0)
+			goto exit;
+
+		for (i = RTC_OFFSET_SEC; i < RTC_OFFSET_COUNT; i++) {
+			if (i == RTC_OFFSET_DOW)
+				continue;
+			ret = rtc_field_read(rtc_pwron_reg[i][RTC_REG],
+					rtc_pwron_reg[i][RTC_MASK],
+					rtc_pwron_reg[i][RTC_SHIFT], &data[i]);
+			if (ret < 0)
+				goto exit;
+		}
+		tm->tm_sec = data[RTC_OFFSET_SEC];
+		tm->tm_min = data[RTC_OFFSET_MIN];
+		tm->tm_hour = data[RTC_OFFSET_HOUR];
+		tm->tm_mday = data[RTC_OFFSET_DOM];
+		tm->tm_mon = data[RTC_OFFSET_MTH];
+		tm->tm_year = data[RTC_OFFSET_YEAR];
+
+		return true;
+	}
+	return false;
+exit:
+	pr_err("%s error\n", __func__);
+	return false;
+}
+
+static int mtk_rtc_set_pwron_alarm_time(struct rtc_time *tm)
+{
+	u16 data[RTC_OFFSET_COUNT];
+	int ret, i;
+
+	pr_err("%s\n", __func__);
+
+	data[RTC_OFFSET_SEC] =
+		((tm->tm_sec << RTC_PWRON_SEC_SHIFT) & RTC_PWRON_SEC_MASK);
+	data[RTC_OFFSET_MIN] =
+		((tm->tm_min << RTC_PWRON_MIN_SHIFT) & RTC_PWRON_MIN_MASK);
+	data[RTC_OFFSET_HOUR] =
+		((tm->tm_hour << RTC_PWRON_HOU_SHIFT) & RTC_PWRON_HOU_MASK);
+	data[RTC_OFFSET_DOM] =
+		((tm->tm_mday << RTC_PWRON_DOM_SHIFT) & RTC_PWRON_DOM_MASK);
+	data[RTC_OFFSET_MTH] =
+		((tm->tm_mon << RTC_PWRON_MTH_SHIFT) & RTC_PWRON_MTH_MASK);
+	data[RTC_OFFSET_YEAR] =
+		((tm->tm_year << RTC_PWRON_YEA_SHIFT) & RTC_PWRON_YEA_MASK);
+
+	for (i = RTC_OFFSET_SEC; i < RTC_OFFSET_COUNT; i++) {
+		if (i == RTC_OFFSET_DOW)
+			continue;
+		ret = rtc_update_bits(rtc_pwron_reg[i][RTC_REG],
+					rtc_pwron_reg[i][RTC_MASK], data[i]);
+		if (ret < 0)
+			goto exit;
+		ret = rtc_write_trigger();
+		if (ret < 0)
+			goto exit;
+	}
+	return ret;
+exit:
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static int mtk_rtc_set_pwron_alarm(bool enable, struct rtc_time *tm, bool logo)
+{
+	u16 pdn1 = 0, pdn2 = 0;
+	int ret;
+
+	ret = mtk_rtc_set_pwron_alarm_time(tm);
+	if (ret < 0)
+		goto exit;
+
+	if (enable)
+		pdn1 = RTC_PDN1_PWRON_TIME;
+	ret = rtc_update_bits(RTC_PDN1, RTC_PDN1_PWRON_TIME, pdn1);
+	if (ret < 0)
+		goto exit;
+
+	if (logo)
+		pdn2 = RTC_PDN2_PWRON_LOGO;
+	ret = rtc_update_bits(RTC_PDN2, RTC_PDN2_PWRON_LOGO, pdn2);
+	if (ret < 0)
+		goto exit;
+
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+
+	return ret;
+
+exit:
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+#define PM_DUMMY 0xFFFF
+
+static int rtc_pm_event(struct notifier_block *notifier, unsigned long pm_event,
+			void *unused)
+{
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		rtc_pm_status = PM_SUSPEND_PREPARE;
+		break;
+	case PM_POST_SUSPEND:
+		rtc_pm_status = PM_POST_SUSPEND;
+		break;
+	default:
+		rtc_pm_status = PM_DUMMY;
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block rtc_pm_notifier_func = {
+	.notifier_call = rtc_pm_event,
+	.priority = 0,
+};
+#endif /* CONFIG_PM */
+
+static bool mtk_rtc_check_pm_valid(void)
+{
+	pr_notice("%s = %lu\n", __func__, rtc_pm_status);
+
+	if (rtc_pm_status != PM_SUSPEND_PREPARE)
+		return true;
+	return false;
+}
+
+static void mtk_rtc_reboot(void)
+{
+	unsigned long long timeout = sched_clock() + (30000000000ULL);
+
+	if (rtc_pm_notifier_registered) {
+		do {
+			if (sched_clock() > timeout) {
+				pr_notice("%s timeout\n", __func__);
+				WARN_ON(1);
+			}
+
+			if (mtk_rtc_check_pm_valid())
+				break;
+
+			mdelay(500);
+			cpu_relax();
+		} while (1);
+	}
+
+	kernel_restart("kpoc");
+}
+
+#ifndef USER_BUILD_KERNEL
+void mtk_rtc_lp_exception(void)
+{
+	u32 bbpu, irqsta, irqen, osc32;
+	u32 pwrkey1, pwrkey2, prot, con, sec1, sec2;
+
+	rtc_read(RTC_BBPU, &bbpu);
+	rtc_read(RTC_IRQ_STA, &irqsta);
+	rtc_read(RTC_IRQ_EN, &irqen);
+	rtc_read(RTC_OSC32CON, &osc32);
+	rtc_read(RTC_POWERKEY1, &pwrkey1);
+	rtc_read(RTC_POWERKEY2, &pwrkey2);
+	rtc_read(RTC_PROT, &prot);
+	rtc_read(RTC_CON, &con);
+	rtc_read(RTC_TC_SEC, &sec1);
+	mdelay(2000);
+	rtc_read(RTC_TC_SEC, &sec2);
+
+	pr_emerg("!!! 32K WAS STOPPED !!!\n"
+		"RTC_BBPU      = 0x%x\n"
+		"RTC_IRQ_STA   = 0x%x\n"
+		"RTC_IRQ_EN    = 0x%x\n"
+		"RTC_OSC32CON  = 0x%x\n"
+		"RTC_POWERKEY1 = 0x%x\n"
+		"RTC_POWERKEY2 = 0x%x\n"
+		"RTC_PROT      = 0x%x\n"
+		"RTC_CON       = 0x%x\n"
+		"RTC_TC_SEC    = %02d\n"
+		"RTC_TC_SEC    = %02d\n",
+		bbpu, irqsta, irqen, osc32, pwrkey1, pwrkey2, prot, con, sec1,
+		sec2);
+}
+#endif
+
+static bool mtk_rtc_is_alarm_irq(void)
+{
+	u32 irqsta, bbpu;
+	int ret, val;
+
+	ret = rtc_read(RTC_IRQ_STA, &irqsta);	/* read clear */
+
+#ifndef USER_BUILD_KERNEL
+	if ((ret == 0) && (irqsta & RTC_IRQ_STA_LP))
+		mtk_rtc_lp_exception();
+#endif
+
+	if ((ret == 0) && (irqsta & RTC_IRQ_STA_AL))
+		return true;
+
+	return false;
+}
+
+static void mtk_rtc_update_pwron_alarm_flag(void)
+{
+	int ret;
+
+	ret = rtc_update_bits(RTC_PDN1, RTC_PDN1_PWRON_TIME, 0);
+	if (ret < 0)
+		goto exit;
+	ret = rtc_update_bits(RTC_PDN2,
+						  RTC_PDN2_PWRON_ALARM,
+						  RTC_PDN2_PWRON_ALARM);
+	if (ret < 0)
+		goto exit;
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+
+	return;
+exit:
+	pr_err("%s error\n", __func__);
+}
+
+static void mtk_rtc_reset_bbpu_alarm_status(void)
+{
+	u32 bbpu;
+	int ret;
+
+
+	if (apply_lpsd_solution) {
+		pr_notice("%s:lpsd\n", __func__);
+		return;
+	}
+
+	bbpu = RTC_BBPU_KEY | RTC_BBPU_PWREN | RTC_BBPU_RESET_AL;
+	rtc_write(RTC_BBPU, bbpu);
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		pr_err("%s error\n", __func__);
+
+	return;
+
+}
+
+static irqreturn_t mtk_rtc_irq_handler(int irq, void *data)
+{
+	bool pwron_alm = false, isAlarmIrq = false, pwron_alarm = false;
+	struct rtc_time nowtm, tm;
+	unsigned long flags;
+
+	pr_notice("%s\n", __func__);
+
+	spin_lock_irqsave(&mt_rtc->lock, flags);
+	isAlarmIrq = mtk_rtc_is_alarm_irq();
+	if (!isAlarmIrq) {
+		spin_unlock_irqrestore(&mt_rtc->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	mtk_rtc_reset_bbpu_alarm_status();
+	spin_unlock_irqrestore(&mt_rtc->lock, flags);
+
+	if (mt_rtc->rtc_dev != NULL)
+		rtc_update_irq(mt_rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	if (rtc_show_alarm)
+		pr_notice("%s time is up\n", pwron_alm ? "power-on" : "alarm");
+
+	return IRQ_NONE;
+}
+
+static int rtc_ops_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long long time;
+	unsigned long flags;
+	struct mt6358_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	ret = mtk_rtc_read_time(tm);
+	if (ret < 0)
+		goto exit;
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	tm->tm_year += RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon--;
+	time = rtc_tm_to_time64(tm);
+
+	do_div(time, 86400);
+	time += 4;
+	tm->tm_wday = do_div(time,  7);	/* 1970/01/01 is Thursday */
+
+	if (rtc_show_time) {
+		pr_notice("read tc time = %04d/%02d/%02d (%d) %02d:%02d:%02d\n",
+			  tm->tm_year + RTC_BASE_YEAR, tm->tm_mon + 1,
+			  tm->tm_mday, tm->tm_wday, tm->tm_hour,
+			  tm->tm_min, tm->tm_sec);
+	}
+
+	return ret;
+
+exit:
+	spin_unlock_irqrestore(&rtc->lock, flags);
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static int rtc_ops_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mt6358_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+	u16 data[RTC_OFFSET_COUNT];
+	int ret;
+
+	if (tm->tm_year > 195) {
+		pr_err("%s: invalid year %04d > 2095\n",
+					__func__, tm->tm_year + RTC_BASE_YEAR);
+		return -EINVAL;
+	}
+
+	pr_notice("set tc time = %04d/%02d/%02d %02d:%02d:%02d\n",
+		  tm->tm_year + RTC_BASE_YEAR, tm->tm_mon + 1, tm->tm_mday,
+		  tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon++;
+
+	data[RTC_OFFSET_SEC] = tm->tm_sec;
+	data[RTC_OFFSET_MIN] = tm->tm_min;
+	data[RTC_OFFSET_HOUR] = tm->tm_hour;
+	data[RTC_OFFSET_DOM] = tm->tm_mday;
+	data[RTC_OFFSET_MTH] = tm->tm_mon;
+	data[RTC_OFFSET_YEAR] = tm->tm_year;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	ret = rtc_bulk_access(BULK_WRITE, RTC_TC_SEC, data, RTC_OFFSET_COUNT);
+		if (ret < 0)
+			goto exit;
+
+	ret = rtc_write_trigger();
+		if (ret < 0)
+			goto exit;
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return ret;
+
+exit:
+	spin_unlock_irqrestore(&rtc->lock, flags);
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static int rtc_ops_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned long flags;
+	struct rtc_time *tm = &alm->time;
+	struct mt6358_rtc *rtc = dev_get_drvdata(dev);
+	u32 irqen, pdn2;
+	u16 data[RTC_OFFSET_COUNT];
+	int ret;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	ret = rtc_read(RTC_IRQ_EN, &irqen);
+	if (ret < 0)
+		goto exit;
+	alm->enabled = !!(irqen & RTC_IRQ_EN_AL);
+
+	/* return Power-On Alarm bit */
+	ret = rtc_read(RTC_PDN2, &pdn2);
+	if (ret < 0)
+		goto exit;
+	alm->pending = !!(pdn2 & RTC_PDN2_PWRON_ALARM);
+
+	ret = rtc_bulk_access(BULK_READ, RTC_AL_SEC, data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto exit;
+
+	tm->tm_sec = data[RTC_OFFSET_SEC] & RTC_AL_SEC_MASK;
+	tm->tm_min = data[RTC_OFFSET_MIN] & RTC_AL_MIN_MASK;
+	tm->tm_hour = data[RTC_OFFSET_HOUR] & RTC_AL_HOU_MASK;
+	tm->tm_mday = data[RTC_OFFSET_DOM] & RTC_AL_DOM_MASK;
+	tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_AL_MTH_MASK;
+	tm->tm_year = data[RTC_OFFSET_YEAR] & RTC_AL_YEA_MASK;
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	tm->tm_year += RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon--;
+
+	pr_notice("read al time = %04d/%02d/%02d %02d:%02d:%02d (%d)\n",
+		  tm->tm_year + RTC_BASE_YEAR, tm->tm_mon + 1, tm->tm_mday,
+		  tm->tm_hour, tm->tm_min, tm->tm_sec, alm->enabled);
+
+	return ret;
+
+exit:
+	spin_unlock_irqrestore(&rtc->lock, flags);
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static int rtc_ops_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned long flags;
+	struct rtc_time tm = alm->time;
+	ktime_t target;
+	struct mt6358_rtc *rtc = dev_get_drvdata(dev);
+	u32 irqsta;
+	int ret = 0;
+
+	if (tm.tm_year > 195) {
+		pr_err("%s: invalid year %04d > 2095\n",
+					__func__, tm.tm_year + RTC_BASE_YEAR);
+		return -EINVAL;
+	}
+
+	if (alm->enabled == 1) {
+		/* Add one more second to postpone wake time. */
+		target = rtc_tm_to_ktime(tm);
+		target = ktime_add_ns(target, NSEC_PER_SEC);
+		tm = rtc_ktime_to_tm(target);
+	}
+
+	tm.tm_year -= RTC_MIN_YEAR_OFFSET;
+	tm.tm_mon++;
+
+	pr_notice("set al time = %04d/%02d/%02d %02d:%02d:%02d (%d)\n",
+		  tm.tm_year + RTC_MIN_YEAR, tm.tm_mon, tm.tm_mday,
+		  tm.tm_hour, tm.tm_min, tm.tm_sec, alm->enabled);
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	if (alm->enabled == 2) {	/* enable power-on alarm */
+		ret = mtk_rtc_set_pwron_alarm(true, &tm, false);
+	} else if (alm->enabled == 3) {	/* enable power-on alarm with logo */
+		ret = mtk_rtc_set_pwron_alarm(true, &tm, true);
+	} else if (alm->enabled == 4) {	/* disable power-on alarm */
+		ret = mtk_rtc_set_pwron_alarm(false, &tm, false);
+	}
+	if (ret < 0)
+		goto exit;
+
+	/* disable alarm and clear Power-On Alarm bit */
+	ret = rtc_update_bits(RTC_IRQ_EN, RTC_IRQ_EN_AL, 0);
+	if (ret < 0)
+		goto exit;
+	ret = rtc_update_bits(RTC_PDN2, RTC_PDN2_PWRON_ALARM, 0);
+	if (ret < 0)
+		goto exit;
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+	ret = rtc_read(RTC_IRQ_STA, &irqsta);	/* read clear */
+	if (ret < 0)
+		goto exit;
+
+	if (alm->enabled)
+		ret = mtk_rtc_set_alarm(&tm);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return ret;
+exit:
+	spin_unlock_irqrestore(&rtc->lock, flags);
+	pr_err("%s error\n", __func__);
+	return ret;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+	.read_time = rtc_ops_read_time,
+	.set_time = rtc_ops_set_time,
+	.read_alarm = rtc_ops_read_alarm,
+	.set_alarm = rtc_ops_set_alarm,
+};
+
+static void mtk_rtc_set_lp_irq(void)
+{
+	unsigned int irqen = 0;
+	int ret;
+
+#ifndef USER_BUILD_KERNEL
+	irqen = RTC_IRQ_EN_LP;
+#endif
+	ret = rtc_update_bits(RTC_IRQ_EN, RTC_IRQ_EN_LP, irqen);
+	if (ret < 0)
+		goto exit;
+
+	ret = rtc_write_trigger();
+	if (ret < 0)
+		goto exit;
+
+	return;
+exit:
+	pr_err("%s error\n", __func__);
+}
+
+static int mtk_rtc_pdrv_probe(struct platform_device *pdev)
+{
+#ifndef IPIMB
+	struct mt6358_chip *mt6358_chip = dev_get_drvdata(pdev->dev.parent);
+#endif
+	struct mt6358_rtc *rtc;
+	unsigned long flags;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct mt6358_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq <= 0)
+		return -EINVAL;
+	pr_notice("%s: rtc->irq = %d(%d)\n", __func__, rtc->irq,
+					platform_get_irq_byname(pdev, "rtc"));
+
+#ifndef IPIMB
+	rtc->regmap = mt6358_chip->regmap;
+#else
+	rtc->regmap = dev_get_regmap(pdev->dev.parent->parent, NULL);
+#endif
+	if (!rtc->regmap) {
+		pr_err("%s: get regmap failed\n", __func__);
+		return -ENODEV;
+	}
+
+	rtc->dev = &pdev->dev;
+	spin_lock_init(&rtc->lock);
+
+	mt_rtc = rtc;
+	platform_set_drvdata(pdev, rtc);
+
+	if (of_property_read_u32(pdev->dev.of_node, "base", &rtc->addr_base))
+		rtc->addr_base = RTC_DSN_ID;
+	pr_notice("%s: rtc->addr_base =0x%x\n", __func__, rtc->addr_base);
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	mtk_rtc_set_lp_irq();
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	ret = request_threaded_irq(rtc->irq, NULL,
+				   mtk_rtc_irq_handler,
+				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+				   "mt6358-rtc", rtc);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			rtc->irq, ret);
+		goto out_dispose_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* register rtc device (/dev/rtc0) */
+	rtc->rtc_dev = rtc_device_register(RTC_NAME,
+					&pdev->dev, &rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		dev_dbg(&pdev->dev, "register rtc device failed\n");
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto out_free_irq;
+	}
+
+	if (of_property_read_bool(pdev->dev.of_node, "apply-lpsd-solution")) {
+		apply_lpsd_solution = 1;
+		pr_notice("%s: apply_lpsd_solution\n", __func__);
+	}
+
+#ifdef CONFIG_PM
+	if (register_pm_notifier(&rtc_pm_notifier_func))
+		pr_notice("rtc pm failed\n");
+	else
+		rtc_pm_notifier_registered = true;
+#endif /* CONFIG_PM */
+	return 0;
+out_free_irq:
+	free_irq(rtc->irq, rtc->rtc_dev);
+out_dispose_irq:
+	irq_dispose_mapping(rtc->irq);
+	return ret;
+}
+
+static int mtk_rtc_pdrv_remove(struct platform_device *pdev)
+{
+	struct mt6358_rtc *rtc = platform_get_drvdata(pdev);
+
+	rtc_device_unregister(rtc->rtc_dev);
+
+	return 0;
+}
+
+static const struct of_device_id mt6358_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6358-rtc", },
+	{ .compatible = "mediatek,mt6359-rtc", },
+	{ .compatible = "mediatek,mt6389-rtc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mt6358_rtc_of_match);
+
+static struct platform_driver mtk_rtc_pdrv = {
+	.probe = mtk_rtc_pdrv_probe,
+	.remove = mtk_rtc_pdrv_remove,
+	.driver = {
+		   .name = RTC_NAME,
+		   .owner = THIS_MODULE,
+		   .of_match_table = mt6358_rtc_of_match,
+		   },
+};
+
+module_platform_driver(mtk_rtc_pdrv);
+
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wilma Wu <wilma.wu@mediatek.com>");
+MODULE_DESCRIPTION("RTC Driver for MediaTek MT6358 PMIC");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6397.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6397.c
new file mode 100644
index 0000000..cf794b5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mt6397.c
@@ -0,0 +1,454 @@
+/*
+* Copyright (c) 2014-2015 MediaTek Inc.
+* Author: Tianping.Fang <tianping.fang@mediatek.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/mfd/mt6397/core.h>
+
+#define RTC_BBPU		0x0000
+#define RTC_BBPU_CBUSY		BIT(6)
+
+#define RTC_WRTGR		0x003a
+
+#define RTC_IRQ_STA		0x0002
+#define RTC_IRQ_STA_AL		BIT(0)
+#define RTC_IRQ_STA_LP		BIT(3)
+
+#define RTC_IRQ_EN		0x0004
+#define RTC_IRQ_EN_AL		BIT(0)
+#define RTC_IRQ_EN_ONESHOT	BIT(2)
+#define RTC_IRQ_EN_LP		BIT(3)
+#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_AL_MASK		0x0008
+#define RTC_AL_MASK_DOW		BIT(4)
+
+#define RTC_TC_SEC		0x000a
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC		0
+#define RTC_OFFSET_MIN		1
+#define RTC_OFFSET_HOUR		2
+#define RTC_OFFSET_DOM		3
+#define RTC_OFFSET_DOW		4
+#define RTC_OFFSET_MTH		5
+#define RTC_OFFSET_YEAR		6
+#define RTC_OFFSET_COUNT	7
+
+#define RTC_AL_SEC		0x0018
+
+#define RTC_AL_SEC_MASK		0x003f
+#define RTC_AL_MIN_MASK		0x003f
+#define RTC_AL_HOU_MASK		0x001f
+#define RTC_AL_DOM_MASK		0x001f
+#define RTC_AL_DOW_MASK		0x0007
+#define RTC_AL_MTH_MASK		0x000f
+#define RTC_AL_YEA_MASK		0x007f
+
+#define RTC_PDN2		0x002e
+#define RTC_PDN2_PWRON_ALARM	BIT(4)
+
+#define RTC_MIN_YEAR		1968
+#define RTC_BASE_YEAR		1900
+#define RTC_NUM_YEARS		128
+#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+struct mt6397_rtc {
+	struct device		*dev;
+	struct rtc_device	*rtc_dev;
+	struct mutex		lock;
+	struct regmap		*regmap;
+	int			irq;
+	u32			addr_base;
+	u32			wrtgr_offset;
+};
+
+static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
+{
+	unsigned long timeout = jiffies + HZ;
+	int ret;
+	u32 data;
+
+	ret = regmap_write(rtc->regmap,
+			   rtc->addr_base + RTC_WRTGR + rtc->wrtgr_offset, 1);
+	if (ret < 0)
+		return ret;
+
+	while (1) {
+		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
+				  &data);
+		if (ret < 0)
+			break;
+		if (!(data & RTC_BBPU_CBUSY))
+			break;
+		if (time_after(jiffies, timeout)) {
+			ret = -ETIMEDOUT;
+			break;
+		}
+		cpu_relax();
+	}
+
+	return ret;
+}
+
+static irqreturn_t mtk_rtc_irq_handler_thread(int irq, void *data)
+{
+	struct mt6397_rtc *rtc = data;
+	u32 irqsta, irqen;
+	int ret;
+
+	ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_IRQ_STA, &irqsta);
+	if ((ret >= 0) && (irqsta & RTC_IRQ_STA_AL)) {
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+		irqen = irqsta & ~RTC_IRQ_EN_AL;
+		mutex_lock(&rtc->lock);
+		if (regmap_write(rtc->regmap, rtc->addr_base + RTC_IRQ_EN,
+				 irqen) == 0)
+			mtk_rtc_write_trigger(rtc);
+		mutex_unlock(&rtc->lock);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int __mtk_rtc_read_time(struct mt6397_rtc *rtc,
+			       struct rtc_time *tm, int *sec)
+{
+	int ret;
+	u16 data[RTC_OFFSET_COUNT];
+
+	mutex_lock(&rtc->lock);
+	ret = regmap_bulk_read(rtc->regmap, rtc->addr_base + RTC_TC_SEC,
+			       data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto exit;
+
+	tm->tm_sec = data[RTC_OFFSET_SEC];
+	tm->tm_min = data[RTC_OFFSET_MIN];
+	tm->tm_hour = data[RTC_OFFSET_HOUR];
+	tm->tm_mday = data[RTC_OFFSET_DOM];
+	tm->tm_mon = data[RTC_OFFSET_MTH];
+	tm->tm_year = data[RTC_OFFSET_YEAR];
+
+	ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_TC_SEC, sec);
+exit:
+	mutex_unlock(&rtc->lock);
+	return ret;
+}
+
+static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t time;
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+	int days, sec, ret;
+
+	do {
+		ret = __mtk_rtc_read_time(rtc, tm, &sec);
+		if (ret < 0)
+			goto exit;
+	} while (sec < tm->tm_sec);
+
+	/* HW register use 7 bits to store year data, minus
+	 * RTC_MIN_YEAR_OFFSET before write year data to register, and plus
+	 * RTC_MIN_YEAR_OFFSET back after read year from register
+	 */
+	tm->tm_year += RTC_MIN_YEAR_OFFSET;
+
+	/* HW register start mon from one, but tm_mon start from zero. */
+	tm->tm_mon--;
+	time = rtc_tm_to_time64(tm);
+
+	/* rtc_tm_to_time64 covert Gregorian date to seconds since
+	 * 01-01-1970 00:00:00, and this date is Thursday.
+	 */
+	days = div_s64(time, 86400);
+	tm->tm_wday = (days + 4) % 7;
+
+exit:
+	return ret;
+}
+
+static int mtk_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+	u16 data[RTC_OFFSET_COUNT];
+
+	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon++;
+
+	data[RTC_OFFSET_SEC] = tm->tm_sec;
+	data[RTC_OFFSET_MIN] = tm->tm_min;
+	data[RTC_OFFSET_HOUR] = tm->tm_hour;
+	data[RTC_OFFSET_DOM] = tm->tm_mday;
+	data[RTC_OFFSET_MTH] = tm->tm_mon;
+	data[RTC_OFFSET_YEAR] = tm->tm_year;
+
+	mutex_lock(&rtc->lock);
+	ret = regmap_bulk_write(rtc->regmap, rtc->addr_base + RTC_TC_SEC,
+				data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto exit;
+
+	/* Time register write to hardware after call trigger function */
+	ret = mtk_rtc_write_trigger(rtc);
+
+exit:
+	mutex_unlock(&rtc->lock);
+	return ret;
+}
+
+static int mtk_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_time *tm = &alm->time;
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+	u32 irqen, pdn2;
+	int ret;
+	u16 data[RTC_OFFSET_COUNT];
+
+	mutex_lock(&rtc->lock);
+	ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_IRQ_EN, &irqen);
+	if (ret < 0)
+		goto err_exit;
+	ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_PDN2, &pdn2);
+	if (ret < 0)
+		goto err_exit;
+
+	ret = regmap_bulk_read(rtc->regmap, rtc->addr_base + RTC_AL_SEC,
+			       data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto err_exit;
+
+	alm->enabled = !!(irqen & RTC_IRQ_EN_AL);
+	alm->pending = !!(pdn2 & RTC_PDN2_PWRON_ALARM);
+	mutex_unlock(&rtc->lock);
+
+	tm->tm_sec = data[RTC_OFFSET_SEC] & RTC_AL_SEC_MASK;
+	tm->tm_min = data[RTC_OFFSET_MIN] & RTC_AL_MIN_MASK;
+	tm->tm_hour = data[RTC_OFFSET_HOUR] & RTC_AL_HOU_MASK;
+	tm->tm_mday = data[RTC_OFFSET_DOM] & RTC_AL_DOM_MASK;
+	tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_AL_MTH_MASK;
+	tm->tm_year = data[RTC_OFFSET_YEAR] & RTC_AL_YEA_MASK;
+
+	tm->tm_year += RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon--;
+
+	return 0;
+err_exit:
+	mutex_unlock(&rtc->lock);
+	return ret;
+}
+
+static int mtk_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_time *tm = &alm->time;
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+	u16 data[RTC_OFFSET_COUNT];
+
+	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
+	tm->tm_mon++;
+
+	mutex_lock(&rtc->lock);
+	ret = regmap_bulk_read(rtc->regmap, rtc->addr_base + RTC_AL_SEC,
+			       data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto exit;
+
+	data[RTC_OFFSET_SEC] = ((data[RTC_OFFSET_SEC] & ~(RTC_AL_SEC_MASK)) |
+				(tm->tm_sec & RTC_AL_SEC_MASK));
+	data[RTC_OFFSET_MIN] = ((data[RTC_OFFSET_MIN] & ~(RTC_AL_MIN_MASK)) |
+				(tm->tm_min & RTC_AL_MIN_MASK));
+	data[RTC_OFFSET_HOUR] = ((data[RTC_OFFSET_HOUR] & ~(RTC_AL_HOU_MASK)) |
+				(tm->tm_hour & RTC_AL_HOU_MASK));
+	data[RTC_OFFSET_DOM] = ((data[RTC_OFFSET_DOM] & ~(RTC_AL_DOM_MASK)) |
+				(tm->tm_mday & RTC_AL_DOM_MASK));
+	data[RTC_OFFSET_MTH] = ((data[RTC_OFFSET_MTH] & ~(RTC_AL_MTH_MASK)) |
+				(tm->tm_mon & RTC_AL_MTH_MASK));
+	data[RTC_OFFSET_YEAR] = ((data[RTC_OFFSET_YEAR] & ~(RTC_AL_YEA_MASK)) |
+				(tm->tm_year & RTC_AL_YEA_MASK));
+
+	if (alm->enabled) {
+		ret = regmap_bulk_write(rtc->regmap,
+					rtc->addr_base + RTC_AL_SEC,
+					data, RTC_OFFSET_COUNT);
+		if (ret < 0)
+			goto exit;
+		ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_AL_MASK,
+				   RTC_AL_MASK_DOW);
+		if (ret < 0)
+			goto exit;
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->addr_base + RTC_IRQ_EN,
+					 RTC_IRQ_EN_ONESHOT_AL,
+					 RTC_IRQ_EN_ONESHOT_AL);
+		if (ret < 0)
+			goto exit;
+	} else {
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->addr_base + RTC_IRQ_EN,
+					 RTC_IRQ_EN_ONESHOT_AL, 0);
+		if (ret < 0)
+			goto exit;
+	}
+
+	/* All alarm time register write to hardware after calling
+	 * mtk_rtc_write_trigger. This can avoid race condition if alarm
+	 * occur happen during writing alarm time register.
+	 */
+	ret = mtk_rtc_write_trigger(rtc);
+exit:
+	mutex_unlock(&rtc->lock);
+	return ret;
+}
+
+static const struct rtc_class_ops mtk_rtc_ops = {
+	.read_time  = mtk_rtc_read_time,
+	.set_time   = mtk_rtc_set_time,
+	.read_alarm = mtk_rtc_read_alarm,
+	.set_alarm  = mtk_rtc_set_alarm,
+};
+
+static int mtk_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6397_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct mt6397_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->addr_base = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+	if (res) {
+		rtc->wrtgr_offset = res->start;
+		dev_info(&pdev->dev, "register offset:%d\n", rtc->wrtgr_offset);
+	} else {
+		rtc->wrtgr_offset = 2;
+		dev_err(&pdev->dev, "Failed to get register offset\n");
+	}
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
+
+	rtc->regmap = mt6397_chip->regmap;
+	rtc->dev = &pdev->dev;
+	mutex_init(&rtc->lock);
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	ret = request_threaded_irq(rtc->irq, NULL,
+				   mtk_rtc_irq_handler_thread,
+				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+				   "mt6397-rtc", rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			rtc->irq, ret);
+		goto out_dispose_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	rtc->rtc_dev->ops = &mtk_rtc_ops;
+
+	ret = rtc_register_device(rtc->rtc_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "register rtc device failed\n");
+		goto out_free_irq;
+	}
+
+	return 0;
+
+out_free_irq:
+	free_irq(rtc->irq, rtc->rtc_dev);
+out_dispose_irq:
+	irq_dispose_mapping(rtc->irq);
+	return ret;
+}
+
+static int mtk_rtc_remove(struct platform_device *pdev)
+{
+	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
+
+	free_irq(rtc->irq, rtc->rtc_dev);
+	irq_dispose_mapping(rtc->irq);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mt6397_rtc_suspend(struct device *dev)
+{
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq);
+
+	return 0;
+}
+
+static int mt6397_rtc_resume(struct device *dev)
+{
+	struct mt6397_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
+			mt6397_rtc_resume);
+
+static const struct of_device_id mt6397_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6358-rtc", },
+	{ .compatible = "mediatek,mt6397-rtc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mt6397_rtc_of_match);
+
+static struct platform_driver mtk_rtc_driver = {
+	.driver = {
+		.name = "mt6397-rtc",
+		.of_match_table = mt6397_rtc_of_match,
+		.pm = &mt6397_pm_ops,
+	},
+	.probe	= mtk_rtc_probe,
+	.remove = mtk_rtc_remove,
+};
+
+module_platform_driver(mtk_rtc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>");
+MODULE_DESCRIPTION("RTC Driver for MediaTek MT6397 PMIC");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mv.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mv.c
new file mode 100644
index 0000000..79bb286
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mv.c
@@ -0,0 +1,343 @@
+/*
+ * Driver for the RTC in Marvell SoCs.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+
+
+#define RTC_TIME_REG_OFFS	0
+#define RTC_SECONDS_OFFS	0
+#define RTC_MINUTES_OFFS	8
+#define RTC_HOURS_OFFS		16
+#define RTC_WDAY_OFFS		24
+#define RTC_HOURS_12H_MODE	BIT(22) /* 12 hour mode */
+
+#define RTC_DATE_REG_OFFS	4
+#define RTC_MDAY_OFFS		0
+#define RTC_MONTH_OFFS		8
+#define RTC_YEAR_OFFS		16
+
+#define RTC_ALARM_TIME_REG_OFFS	8
+#define RTC_ALARM_DATE_REG_OFFS	0xc
+#define RTC_ALARM_VALID		BIT(7)
+
+#define RTC_ALARM_INTERRUPT_MASK_REG_OFFS	0x10
+#define RTC_ALARM_INTERRUPT_CASUE_REG_OFFS	0x14
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	int		irq;
+	struct clk	*clk;
+};
+
+static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32	rtc_reg;
+
+	rtc_reg = (bin2bcd(tm->tm_sec) << RTC_SECONDS_OFFS) |
+		(bin2bcd(tm->tm_min) << RTC_MINUTES_OFFS) |
+		(bin2bcd(tm->tm_hour) << RTC_HOURS_OFFS) |
+		(bin2bcd(tm->tm_wday) << RTC_WDAY_OFFS);
+	writel(rtc_reg, ioaddr + RTC_TIME_REG_OFFS);
+
+	rtc_reg = (bin2bcd(tm->tm_mday) << RTC_MDAY_OFFS) |
+		(bin2bcd(tm->tm_mon + 1) << RTC_MONTH_OFFS) |
+		(bin2bcd(tm->tm_year % 100) << RTC_YEAR_OFFS);
+	writel(rtc_reg, ioaddr + RTC_DATE_REG_OFFS);
+
+	return 0;
+}
+
+static int mv_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32	rtc_time, rtc_date;
+	unsigned int year, month, day, hour, minute, second, wday;
+
+	rtc_time = readl(ioaddr + RTC_TIME_REG_OFFS);
+	rtc_date = readl(ioaddr + RTC_DATE_REG_OFFS);
+
+	second = rtc_time & 0x7f;
+	minute = (rtc_time >> RTC_MINUTES_OFFS) & 0x7f;
+	hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hour mode */
+	wday = (rtc_time >> RTC_WDAY_OFFS) & 0x7;
+
+	day = rtc_date & 0x3f;
+	month = (rtc_date >> RTC_MONTH_OFFS) & 0x3f;
+	year = (rtc_date >> RTC_YEAR_OFFS) & 0xff;
+
+	tm->tm_sec = bcd2bin(second);
+	tm->tm_min = bcd2bin(minute);
+	tm->tm_hour = bcd2bin(hour);
+	tm->tm_mday = bcd2bin(day);
+	tm->tm_wday = bcd2bin(wday);
+	tm->tm_mon = bcd2bin(month) - 1;
+	/* hw counts from year 2000, but tm_year is relative to 1900 */
+	tm->tm_year = bcd2bin(year) + 100;
+
+	return rtc_valid_tm(tm);
+}
+
+static int mv_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32	rtc_time, rtc_date;
+	unsigned int year, month, day, hour, minute, second, wday;
+
+	rtc_time = readl(ioaddr + RTC_ALARM_TIME_REG_OFFS);
+	rtc_date = readl(ioaddr + RTC_ALARM_DATE_REG_OFFS);
+
+	second = rtc_time & 0x7f;
+	minute = (rtc_time >> RTC_MINUTES_OFFS) & 0x7f;
+	hour = (rtc_time >> RTC_HOURS_OFFS) & 0x3f; /* assume 24 hour mode */
+	wday = (rtc_time >> RTC_WDAY_OFFS) & 0x7;
+
+	day = rtc_date & 0x3f;
+	month = (rtc_date >> RTC_MONTH_OFFS) & 0x3f;
+	year = (rtc_date >> RTC_YEAR_OFFS) & 0xff;
+
+	alm->time.tm_sec = bcd2bin(second);
+	alm->time.tm_min = bcd2bin(minute);
+	alm->time.tm_hour = bcd2bin(hour);
+	alm->time.tm_mday = bcd2bin(day);
+	alm->time.tm_wday = bcd2bin(wday);
+	alm->time.tm_mon = bcd2bin(month) - 1;
+	/* hw counts from year 2000, but tm_year is relative to 1900 */
+	alm->time.tm_year = bcd2bin(year) + 100;
+
+	if (rtc_valid_tm(&alm->time) < 0) {
+		dev_err(dev, "retrieved alarm date/time is not valid.\n");
+		rtc_time_to_tm(0, &alm->time);
+	}
+
+	alm->enabled = !!readl(ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
+	return 0;
+}
+
+static int mv_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 rtc_reg = 0;
+
+	if (alm->time.tm_sec >= 0)
+		rtc_reg |= (RTC_ALARM_VALID | bin2bcd(alm->time.tm_sec))
+			<< RTC_SECONDS_OFFS;
+	if (alm->time.tm_min >= 0)
+		rtc_reg |= (RTC_ALARM_VALID | bin2bcd(alm->time.tm_min))
+			<< RTC_MINUTES_OFFS;
+	if (alm->time.tm_hour >= 0)
+		rtc_reg |= (RTC_ALARM_VALID | bin2bcd(alm->time.tm_hour))
+			<< RTC_HOURS_OFFS;
+
+	writel(rtc_reg, ioaddr + RTC_ALARM_TIME_REG_OFFS);
+
+	if (alm->time.tm_mday >= 0)
+		rtc_reg = (RTC_ALARM_VALID | bin2bcd(alm->time.tm_mday))
+			<< RTC_MDAY_OFFS;
+	else
+		rtc_reg = 0;
+
+	if (alm->time.tm_mon >= 0)
+		rtc_reg |= (RTC_ALARM_VALID | bin2bcd(alm->time.tm_mon + 1))
+			<< RTC_MONTH_OFFS;
+
+	if (alm->time.tm_year >= 0)
+		rtc_reg |= (RTC_ALARM_VALID | bin2bcd(alm->time.tm_year % 100))
+			<< RTC_YEAR_OFFS;
+
+	writel(rtc_reg, ioaddr + RTC_ALARM_DATE_REG_OFFS);
+	writel(0, ioaddr + RTC_ALARM_INTERRUPT_CASUE_REG_OFFS);
+	writel(alm->enabled ? 1 : 0,
+	       ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
+
+	return 0;
+}
+
+static int mv_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	if (pdata->irq < 0)
+		return -EINVAL; /* fall back into rtc-dev's emulation */
+
+	if (enabled)
+		writel(1, ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
+	else
+		writel(0, ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
+	return 0;
+}
+
+static irqreturn_t mv_rtc_interrupt(int irq, void *data)
+{
+	struct rtc_plat_data *pdata = data;
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	/* alarm irq? */
+	if (!readl(ioaddr + RTC_ALARM_INTERRUPT_CASUE_REG_OFFS))
+		return IRQ_NONE;
+
+	/* clear interrupt */
+	writel(0, ioaddr + RTC_ALARM_INTERRUPT_CASUE_REG_OFFS);
+	rtc_update_irq(pdata->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops mv_rtc_ops = {
+	.read_time	= mv_rtc_read_time,
+	.set_time	= mv_rtc_set_time,
+};
+
+static const struct rtc_class_ops mv_rtc_alarm_ops = {
+	.read_time	= mv_rtc_read_time,
+	.set_time	= mv_rtc_set_time,
+	.read_alarm	= mv_rtc_read_alarm,
+	.set_alarm	= mv_rtc_set_alarm,
+	.alarm_irq_enable = mv_rtc_alarm_irq_enable,
+};
+
+static int __init mv_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct rtc_plat_data *pdata;
+	u32 rtc_time;
+	u32 rtc_date;
+	int ret = 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->ioaddr))
+		return PTR_ERR(pdata->ioaddr);
+
+	pdata->clk = devm_clk_get(&pdev->dev, NULL);
+	/* Not all SoCs require a clock.*/
+	if (!IS_ERR(pdata->clk))
+		clk_prepare_enable(pdata->clk);
+
+	/* make sure the 24 hour mode is enabled */
+	rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+	if (rtc_time & RTC_HOURS_12H_MODE) {
+		dev_err(&pdev->dev, "12 Hour mode is enabled but not supported.\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* make sure it is actually functional */
+	if (rtc_time == 0x01000000) {
+		ssleep(1);
+		rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+		if (rtc_time == 0x01000000) {
+			dev_err(&pdev->dev, "internal RTC not ticking\n");
+			ret = -ENODEV;
+			goto out;
+		}
+	}
+
+	/*
+	 * A date after January 19th, 2038 does not fit on 32 bits and
+	 * will confuse the kernel and userspace. Reset to a sane date
+	 * (January 1st, 2013) if we're after 2038.
+	 */
+	rtc_date = readl(pdata->ioaddr + RTC_DATE_REG_OFFS);
+	if (bcd2bin((rtc_date >> RTC_YEAR_OFFS) & 0xff) >= 38) {
+		dev_info(&pdev->dev, "invalid RTC date, resetting to January 1st, 2013\n");
+		writel(0x130101, pdata->ioaddr + RTC_DATE_REG_OFFS);
+	}
+
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	platform_set_drvdata(pdev, pdata);
+
+	if (pdata->irq >= 0) {
+		device_init_wakeup(&pdev->dev, 1);
+		pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+						 &mv_rtc_alarm_ops,
+						 THIS_MODULE);
+	} else {
+		pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+						 &mv_rtc_ops, THIS_MODULE);
+	}
+	if (IS_ERR(pdata->rtc)) {
+		ret = PTR_ERR(pdata->rtc);
+		goto out;
+	}
+
+	if (pdata->irq >= 0) {
+		writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
+		if (devm_request_irq(&pdev->dev, pdata->irq, mv_rtc_interrupt,
+				     IRQF_SHARED,
+				     pdev->name, pdata) < 0) {
+			dev_warn(&pdev->dev, "interrupt not available.\n");
+			pdata->irq = -1;
+		}
+	}
+
+	return 0;
+out:
+	if (!IS_ERR(pdata->clk))
+		clk_disable_unprepare(pdata->clk);
+
+	return ret;
+}
+
+static int __exit mv_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq >= 0)
+		device_init_wakeup(&pdev->dev, 0);
+
+	if (!IS_ERR(pdata->clk))
+		clk_disable_unprepare(pdata->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id rtc_mv_of_match_table[] = {
+	{ .compatible = "marvell,orion-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rtc_mv_of_match_table);
+#endif
+
+static struct platform_driver mv_rtc_driver = {
+	.remove		= __exit_p(mv_rtc_remove),
+	.driver		= {
+		.name	= "rtc-mv",
+		.of_match_table = of_match_ptr(rtc_mv_of_match_table),
+	},
+};
+
+module_platform_driver_probe(mv_rtc_driver, mv_rtc_probe);
+
+MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>");
+MODULE_DESCRIPTION("Marvell RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-mv");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-mxc.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-mxc.c
new file mode 100644
index 0000000..bce427d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-mxc.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#define RTC_INPUT_CLK_32768HZ	(0x00 << 5)
+#define RTC_INPUT_CLK_32000HZ	(0x01 << 5)
+#define RTC_INPUT_CLK_38400HZ	(0x02 << 5)
+
+#define RTC_SW_BIT      (1 << 0)
+#define RTC_ALM_BIT     (1 << 2)
+#define RTC_1HZ_BIT     (1 << 4)
+#define RTC_2HZ_BIT     (1 << 7)
+#define RTC_SAM0_BIT    (1 << 8)
+#define RTC_SAM1_BIT    (1 << 9)
+#define RTC_SAM2_BIT    (1 << 10)
+#define RTC_SAM3_BIT    (1 << 11)
+#define RTC_SAM4_BIT    (1 << 12)
+#define RTC_SAM5_BIT    (1 << 13)
+#define RTC_SAM6_BIT    (1 << 14)
+#define RTC_SAM7_BIT    (1 << 15)
+#define PIT_ALL_ON      (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
+			 RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
+			 RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
+
+#define RTC_ENABLE_BIT  (1 << 7)
+
+#define MAX_PIE_NUM     9
+#define MAX_PIE_FREQ    512
+
+#define MXC_RTC_TIME	0
+#define MXC_RTC_ALARM	1
+
+#define RTC_HOURMIN	0x00	/*  32bit rtc hour/min counter reg */
+#define RTC_SECOND	0x04	/*  32bit rtc seconds counter reg */
+#define RTC_ALRM_HM	0x08	/*  32bit rtc alarm hour/min reg */
+#define RTC_ALRM_SEC	0x0C	/*  32bit rtc alarm seconds reg */
+#define RTC_RTCCTL	0x10	/*  32bit rtc control reg */
+#define RTC_RTCISR	0x14	/*  32bit rtc interrupt status reg */
+#define RTC_RTCIENR	0x18	/*  32bit rtc interrupt enable reg */
+#define RTC_STPWCH	0x1C	/*  32bit rtc stopwatch min reg */
+#define RTC_DAYR	0x20	/*  32bit rtc days counter reg */
+#define RTC_DAYALARM	0x24	/*  32bit rtc day alarm reg */
+#define RTC_TEST1	0x28	/*  32bit rtc test reg 1 */
+#define RTC_TEST2	0x2C	/*  32bit rtc test reg 2 */
+#define RTC_TEST3	0x30	/*  32bit rtc test reg 3 */
+
+enum imx_rtc_type {
+	IMX1_RTC,
+	IMX21_RTC,
+};
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	int irq;
+	struct clk *clk_ref;
+	struct clk *clk_ipg;
+	struct rtc_time g_rtc_alarm;
+	enum imx_rtc_type devtype;
+};
+
+static const struct platform_device_id imx_rtc_devtype[] = {
+	{
+		.name = "imx1-rtc",
+		.driver_data = IMX1_RTC,
+	}, {
+		.name = "imx21-rtc",
+		.driver_data = IMX21_RTC,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
+
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+	{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
+	{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+#endif
+
+static inline int is_imx1_rtc(struct rtc_plat_data *data)
+{
+	return data->devtype == IMX1_RTC;
+}
+
+/*
+ * This function is used to obtain the RTC time or the alarm value in
+ * second.
+ */
+static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
+
+	switch (time_alarm) {
+	case MXC_RTC_TIME:
+		day = readw(ioaddr + RTC_DAYR);
+		hr_min = readw(ioaddr + RTC_HOURMIN);
+		sec = readw(ioaddr + RTC_SECOND);
+		break;
+	case MXC_RTC_ALARM:
+		day = readw(ioaddr + RTC_DAYALARM);
+		hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
+		sec = readw(ioaddr + RTC_ALRM_SEC);
+		break;
+	}
+
+	hr = hr_min >> 8;
+	min = hr_min & 0xff;
+
+	return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
+}
+
+/*
+ * This function sets the RTC alarm value or the time value.
+ */
+static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
+{
+	u32 tod, day, hr, min, sec, temp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	day = div_s64_rem(time, 86400, &tod);
+
+	/* time is within a day now */
+	hr = tod / 3600;
+	tod -= hr * 3600;
+
+	/* time is within an hour now */
+	min = tod / 60;
+	sec = tod - min * 60;
+
+	temp = (hr << 8) + min;
+
+	switch (time_alarm) {
+	case MXC_RTC_TIME:
+		writew(day, ioaddr + RTC_DAYR);
+		writew(sec, ioaddr + RTC_SECOND);
+		writew(temp, ioaddr + RTC_HOURMIN);
+		break;
+	case MXC_RTC_ALARM:
+		writew(day, ioaddr + RTC_DAYALARM);
+		writew(sec, ioaddr + RTC_ALRM_SEC);
+		writew(temp, ioaddr + RTC_ALRM_HM);
+		break;
+	}
+}
+
+/*
+ * This function updates the RTC alarm registers and then clears all the
+ * interrupt status bits.
+ */
+static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
+{
+	time64_t time;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	time = rtc_tm_to_time64(alrm);
+
+	/* clear all the interrupt status bits */
+	writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
+	set_alarm_or_time(dev, MXC_RTC_ALARM, time);
+}
+
+static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
+				unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 reg;
+
+	spin_lock_irq(&pdata->rtc->irq_lock);
+	reg = readw(ioaddr + RTC_RTCIENR);
+
+	if (enabled)
+		reg |= bit;
+	else
+		reg &= ~bit;
+
+	writew(reg, ioaddr + RTC_RTCIENR);
+	spin_unlock_irq(&pdata->rtc->irq_lock);
+}
+
+/* This function is the RTC interrupt service routine. */
+static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned long flags;
+	u32 status;
+	u32 events = 0;
+
+	spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
+	status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
+	/* clear interrupt sources */
+	writew(status, ioaddr + RTC_RTCISR);
+
+	/* update irq data & counter */
+	if (status & RTC_ALM_BIT) {
+		events |= (RTC_AF | RTC_IRQF);
+		/* RTC alarm should be one-shot */
+		mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
+	}
+
+	if (status & PIT_ALL_ON)
+		events |= (RTC_PF | RTC_IRQF);
+
+	rtc_update_irq(pdata->rtc, 1, events);
+	spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
+	return 0;
+}
+
+/*
+ * This function reads the current RTC time into tm in Gregorian date.
+ */
+static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t val;
+
+	/* Avoid roll-over from reading the different registers */
+	do {
+		val = get_alarm_or_time(dev, MXC_RTC_TIME);
+	} while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
+
+	rtc_time64_to_tm(val, tm);
+
+	return 0;
+}
+
+/*
+ * This function sets the internal RTC time based on tm in Gregorian date.
+ */
+static int mxc_rtc_set_mmss(struct device *dev, time64_t time)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	/*
+	 * TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
+	 */
+	if (is_imx1_rtc(pdata)) {
+		struct rtc_time tm;
+
+		rtc_time64_to_tm(time, &tm);
+		tm.tm_year = 70;
+		time = rtc_tm_to_time64(&tm);
+	}
+
+	/* Avoid roll-over from reading the different registers */
+	do {
+		set_alarm_or_time(dev, MXC_RTC_TIME, time);
+	} while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
+
+	return 0;
+}
+
+/*
+ * This function reads the current alarm value into the passed in 'alrm'
+ * argument. It updates the alrm's pending field value based on the whether
+ * an alarm interrupt occurs or not.
+ */
+static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
+	alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
+
+	return 0;
+}
+
+/*
+ * This function sets the RTC alarm based on passed in alrm.
+ */
+static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	rtc_update_alarm(dev, &alrm->time);
+
+	memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
+	mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
+
+	return 0;
+}
+
+/* RTC layer */
+static const struct rtc_class_ops mxc_rtc_ops = {
+	.read_time		= mxc_rtc_read_time,
+	.set_mmss64		= mxc_rtc_set_mmss,
+	.read_alarm		= mxc_rtc_read_alarm,
+	.set_alarm		= mxc_rtc_set_alarm,
+	.alarm_irq_enable	= mxc_rtc_alarm_irq_enable,
+};
+
+static int mxc_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct rtc_device *rtc;
+	struct rtc_plat_data *pdata = NULL;
+	u32 reg;
+	unsigned long rate;
+	int ret;
+	const struct of_device_id *of_id;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
+	if (of_id)
+		pdata->devtype = (enum imx_rtc_type)of_id->data;
+	else
+		pdata->devtype = pdev->id_entry->driver_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->ioaddr))
+		return PTR_ERR(pdata->ioaddr);
+
+	pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(pdata->clk_ipg)) {
+		dev_err(&pdev->dev, "unable to get ipg clock!\n");
+		return PTR_ERR(pdata->clk_ipg);
+	}
+
+	ret = clk_prepare_enable(pdata->clk_ipg);
+	if (ret)
+		return ret;
+
+	pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(pdata->clk_ref)) {
+		dev_err(&pdev->dev, "unable to get ref clock!\n");
+		ret = PTR_ERR(pdata->clk_ref);
+		goto exit_put_clk_ipg;
+	}
+
+	ret = clk_prepare_enable(pdata->clk_ref);
+	if (ret)
+		goto exit_put_clk_ipg;
+
+	rate = clk_get_rate(pdata->clk_ref);
+
+	if (rate == 32768)
+		reg = RTC_INPUT_CLK_32768HZ;
+	else if (rate == 32000)
+		reg = RTC_INPUT_CLK_32000HZ;
+	else if (rate == 38400)
+		reg = RTC_INPUT_CLK_38400HZ;
+	else {
+		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
+		ret = -EINVAL;
+		goto exit_put_clk_ref;
+	}
+
+	reg |= RTC_ENABLE_BIT;
+	writew(reg, (pdata->ioaddr + RTC_RTCCTL));
+	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
+		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
+		ret = -EIO;
+		goto exit_put_clk_ref;
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	/* Configure and enable the RTC */
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	if (pdata->irq >= 0 &&
+	    devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
+			     IRQF_SHARED, pdev->name, pdev) < 0) {
+		dev_warn(&pdev->dev, "interrupt not available.\n");
+		pdata->irq = -1;
+	}
+
+	if (pdata->irq >= 0)
+		device_init_wakeup(&pdev->dev, 1);
+
+	rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		ret = PTR_ERR(rtc);
+		goto exit_put_clk_ref;
+	}
+
+	pdata->rtc = rtc;
+
+	return 0;
+
+exit_put_clk_ref:
+	clk_disable_unprepare(pdata->clk_ref);
+exit_put_clk_ipg:
+	clk_disable_unprepare(pdata->clk_ipg);
+
+	return ret;
+}
+
+static int mxc_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(pdata->clk_ref);
+	clk_disable_unprepare(pdata->clk_ipg);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mxc_rtc_suspend(struct device *dev)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static int mxc_rtc_resume(struct device *dev)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pdata->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
+
+static struct platform_driver mxc_rtc_driver = {
+	.driver = {
+		   .name	= "mxc_rtc",
+		   .of_match_table = of_match_ptr(imx_rtc_dt_ids),
+		   .pm		= &mxc_rtc_pm_ops,
+	},
+	.id_table = imx_rtc_devtype,
+	.probe = mxc_rtc_probe,
+	.remove = mxc_rtc_remove,
+};
+
+module_platform_driver(mxc_rtc_driver)
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("RTC driver for Freescale MXC");
+MODULE_LICENSE("GPL");
+
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-nuc900.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-nuc900.c
new file mode 100644
index 0000000..4ed8111
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-nuc900.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+
+/* RTC Control Registers */
+#define REG_RTC_INIR		0x00
+#define REG_RTC_AER		0x04
+#define REG_RTC_FCR		0x08
+#define REG_RTC_TLR		0x0C
+#define REG_RTC_CLR		0x10
+#define REG_RTC_TSSR		0x14
+#define REG_RTC_DWR		0x18
+#define REG_RTC_TAR		0x1C
+#define REG_RTC_CAR		0x20
+#define REG_RTC_LIR		0x24
+#define REG_RTC_RIER		0x28
+#define REG_RTC_RIIR		0x2C
+#define REG_RTC_TTR		0x30
+
+#define RTCSET			0x01
+#define AERRWENB		0x10000
+#define INIRRESET		0xa5eb1357
+#define AERPOWERON		0xA965
+#define AERPOWEROFF		0x0000
+#define LEAPYEAR		0x0001
+#define TICKENB			0x80
+#define TICKINTENB		0x0002
+#define ALARMINTENB		0x0001
+#define MODE24			0x0001
+
+struct nuc900_rtc {
+	int			irq_num;
+	void __iomem		*rtc_reg;
+	struct rtc_device	*rtcdev;
+};
+
+struct nuc900_bcd_time {
+	int bcd_sec;
+	int bcd_min;
+	int bcd_hour;
+	int bcd_mday;
+	int bcd_mon;
+	int bcd_year;
+};
+
+static irqreturn_t nuc900_rtc_interrupt(int irq, void *_rtc)
+{
+	struct nuc900_rtc *rtc = _rtc;
+	unsigned long events = 0, rtc_irq;
+
+	rtc_irq = __raw_readl(rtc->rtc_reg + REG_RTC_RIIR);
+
+	if (rtc_irq & ALARMINTENB) {
+		rtc_irq &= ~ALARMINTENB;
+		__raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+		events |= RTC_AF | RTC_IRQF;
+	}
+
+	if (rtc_irq & TICKINTENB) {
+		rtc_irq &= ~TICKINTENB;
+		__raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+		events |= RTC_UF | RTC_IRQF;
+	}
+
+	rtc_update_irq(rtc->rtcdev, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static int *check_rtc_access_enable(struct nuc900_rtc *nuc900_rtc)
+{
+	unsigned int timeout = 0x1000;
+	__raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
+
+	mdelay(10);
+
+	__raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
+
+	while (!(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+								&& --timeout)
+		mdelay(1);
+
+	if (!timeout)
+		return ERR_PTR(-EPERM);
+
+	return NULL;
+}
+
+static int nuc900_rtc_bcd2bin(unsigned int timereg,
+				unsigned int calreg, struct rtc_time *tm)
+{
+	tm->tm_mday	= bcd2bin(calreg >> 0);
+	tm->tm_mon	= bcd2bin(calreg >> 8);
+	tm->tm_year	= bcd2bin(calreg >> 16) + 100;
+
+	tm->tm_sec	= bcd2bin(timereg >> 0);
+	tm->tm_min	= bcd2bin(timereg >> 8);
+	tm->tm_hour	= bcd2bin(timereg >> 16);
+
+	return rtc_valid_tm(tm);
+}
+
+static void nuc900_rtc_bin2bcd(struct device *dev, struct rtc_time *settm,
+						struct nuc900_bcd_time *gettm)
+{
+	gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
+	gettm->bcd_mon  = bin2bcd(settm->tm_mon) << 8;
+
+	if (settm->tm_year < 100) {
+		dev_warn(dev, "The year will be between 1970-1999, right?\n");
+		gettm->bcd_year = bin2bcd(settm->tm_year) << 16;
+	} else {
+		gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+	}
+
+	gettm->bcd_sec  = bin2bcd(settm->tm_sec) << 0;
+	gettm->bcd_min  = bin2bcd(settm->tm_min) << 8;
+	gettm->bcd_hour = bin2bcd(settm->tm_hour) << 16;
+}
+
+static int nuc900_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+				(ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+	else
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+				(~ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+	return 0;
+}
+
+static int nuc900_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int timeval, clrval;
+
+	timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TLR);
+	clrval	= __raw_readl(rtc->rtc_reg + REG_RTC_CLR);
+
+	return nuc900_rtc_bcd2bin(timeval, clrval, tm);
+}
+
+static int nuc900_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	struct nuc900_bcd_time gettm;
+	unsigned long val;
+	int *err;
+
+	nuc900_rtc_bin2bcd(dev, tm, &gettm);
+
+	err = check_rtc_access_enable(rtc);
+	if (IS_ERR(err))
+		return PTR_ERR(err);
+
+	val = gettm.bcd_mday | gettm.bcd_mon | gettm.bcd_year;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_CLR);
+
+	val = gettm.bcd_sec | gettm.bcd_min | gettm.bcd_hour;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_TLR);
+
+	return 0;
+}
+
+static int nuc900_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int timeval, carval;
+
+	timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TAR);
+	carval	= __raw_readl(rtc->rtc_reg + REG_RTC_CAR);
+
+	return nuc900_rtc_bcd2bin(timeval, carval, &alrm->time);
+}
+
+static int nuc900_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	struct nuc900_bcd_time tm;
+	unsigned long val;
+	int *err;
+
+	nuc900_rtc_bin2bcd(dev, &alrm->time, &tm);
+
+	err = check_rtc_access_enable(rtc);
+	if (IS_ERR(err))
+		return PTR_ERR(err);
+
+	val = tm.bcd_mday | tm.bcd_mon | tm.bcd_year;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_CAR);
+
+	val = tm.bcd_sec | tm.bcd_min | tm.bcd_hour;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_TAR);
+
+	return 0;
+}
+
+static const struct rtc_class_ops nuc900_rtc_ops = {
+	.read_time = nuc900_rtc_read_time,
+	.set_time = nuc900_rtc_set_time,
+	.read_alarm = nuc900_rtc_read_alarm,
+	.set_alarm = nuc900_rtc_set_alarm,
+	.alarm_irq_enable = nuc900_alarm_irq_enable,
+};
+
+static int __init nuc900_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct nuc900_rtc *nuc900_rtc;
+
+	nuc900_rtc = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_rtc),
+				GFP_KERNEL);
+	if (!nuc900_rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nuc900_rtc->rtc_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nuc900_rtc->rtc_reg))
+		return PTR_ERR(nuc900_rtc->rtc_reg);
+
+	platform_set_drvdata(pdev, nuc900_rtc);
+
+	nuc900_rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
+						&nuc900_rtc_ops, THIS_MODULE);
+	if (IS_ERR(nuc900_rtc->rtcdev)) {
+		dev_err(&pdev->dev, "rtc device register failed\n");
+		return PTR_ERR(nuc900_rtc->rtcdev);
+	}
+
+	__raw_writel(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_TSSR) | MODE24,
+					nuc900_rtc->rtc_reg + REG_RTC_TSSR);
+
+	nuc900_rtc->irq_num = platform_get_irq(pdev, 0);
+	if (devm_request_irq(&pdev->dev, nuc900_rtc->irq_num,
+			nuc900_rtc_interrupt, 0, "nuc900rtc", nuc900_rtc)) {
+		dev_err(&pdev->dev, "NUC900 RTC request irq failed\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static struct platform_driver nuc900_rtc_driver = {
+	.driver		= {
+		.name	= "nuc900-rtc",
+	},
+};
+
+module_platform_driver_probe(nuc900_rtc_driver, nuc900_rtc_probe);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("nuc910/nuc920 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-omap.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-omap.c
new file mode 100644
index 0000000..b25a2ba
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-omap.c
@@ -0,0 +1,970 @@
+/*
+ * TI OMAP Real Time Clock interface for Linux
+ *
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
+ *
+ * Copyright (C) 2006 David Brownell (new RTC framework)
+ * Copyright (C) 2014 Johan Hovold <johan@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/rtc.h>
+
+/*
+ * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
+ * with century-range alarm matching, driven by the 32kHz clock.
+ *
+ * The main user-visible ways it differs from PC RTCs are by omitting
+ * "don't care" alarm fields and sub-second periodic IRQs, and having
+ * an autoadjust mechanism to calibrate to the true oscillator rate.
+ *
+ * Board-specific wiring options include using split power mode with
+ * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
+ * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
+ * low power modes) for OMAP1 boards (OMAP-L138 has this built into
+ * the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
+ */
+
+/* RTC registers */
+#define OMAP_RTC_SECONDS_REG		0x00
+#define OMAP_RTC_MINUTES_REG		0x04
+#define OMAP_RTC_HOURS_REG		0x08
+#define OMAP_RTC_DAYS_REG		0x0C
+#define OMAP_RTC_MONTHS_REG		0x10
+#define OMAP_RTC_YEARS_REG		0x14
+#define OMAP_RTC_WEEKS_REG		0x18
+
+#define OMAP_RTC_ALARM_SECONDS_REG	0x20
+#define OMAP_RTC_ALARM_MINUTES_REG	0x24
+#define OMAP_RTC_ALARM_HOURS_REG	0x28
+#define OMAP_RTC_ALARM_DAYS_REG		0x2c
+#define OMAP_RTC_ALARM_MONTHS_REG	0x30
+#define OMAP_RTC_ALARM_YEARS_REG	0x34
+
+#define OMAP_RTC_CTRL_REG		0x40
+#define OMAP_RTC_STATUS_REG		0x44
+#define OMAP_RTC_INTERRUPTS_REG		0x48
+
+#define OMAP_RTC_COMP_LSB_REG		0x4c
+#define OMAP_RTC_COMP_MSB_REG		0x50
+#define OMAP_RTC_OSC_REG		0x54
+
+#define OMAP_RTC_KICK0_REG		0x6c
+#define OMAP_RTC_KICK1_REG		0x70
+
+#define OMAP_RTC_IRQWAKEEN		0x7c
+
+#define OMAP_RTC_ALARM2_SECONDS_REG	0x80
+#define OMAP_RTC_ALARM2_MINUTES_REG	0x84
+#define OMAP_RTC_ALARM2_HOURS_REG	0x88
+#define OMAP_RTC_ALARM2_DAYS_REG	0x8c
+#define OMAP_RTC_ALARM2_MONTHS_REG	0x90
+#define OMAP_RTC_ALARM2_YEARS_REG	0x94
+
+#define OMAP_RTC_PMIC_REG		0x98
+
+/* OMAP_RTC_CTRL_REG bit fields: */
+#define OMAP_RTC_CTRL_SPLIT		BIT(7)
+#define OMAP_RTC_CTRL_DISABLE		BIT(6)
+#define OMAP_RTC_CTRL_SET_32_COUNTER	BIT(5)
+#define OMAP_RTC_CTRL_TEST		BIT(4)
+#define OMAP_RTC_CTRL_MODE_12_24	BIT(3)
+#define OMAP_RTC_CTRL_AUTO_COMP		BIT(2)
+#define OMAP_RTC_CTRL_ROUND_30S		BIT(1)
+#define OMAP_RTC_CTRL_STOP		BIT(0)
+
+/* OMAP_RTC_STATUS_REG bit fields: */
+#define OMAP_RTC_STATUS_POWER_UP	BIT(7)
+#define OMAP_RTC_STATUS_ALARM2		BIT(7)
+#define OMAP_RTC_STATUS_ALARM		BIT(6)
+#define OMAP_RTC_STATUS_1D_EVENT	BIT(5)
+#define OMAP_RTC_STATUS_1H_EVENT	BIT(4)
+#define OMAP_RTC_STATUS_1M_EVENT	BIT(3)
+#define OMAP_RTC_STATUS_1S_EVENT	BIT(2)
+#define OMAP_RTC_STATUS_RUN		BIT(1)
+#define OMAP_RTC_STATUS_BUSY		BIT(0)
+
+/* OMAP_RTC_INTERRUPTS_REG bit fields: */
+#define OMAP_RTC_INTERRUPTS_IT_ALARM2	BIT(4)
+#define OMAP_RTC_INTERRUPTS_IT_ALARM	BIT(3)
+#define OMAP_RTC_INTERRUPTS_IT_TIMER	BIT(2)
+
+/* OMAP_RTC_OSC_REG bit fields: */
+#define OMAP_RTC_OSC_32KCLK_EN		BIT(6)
+#define OMAP_RTC_OSC_SEL_32KCLK_SRC	BIT(3)
+#define OMAP_RTC_OSC_OSC32K_GZ_DISABLE	BIT(4)
+
+/* OMAP_RTC_IRQWAKEEN bit fields: */
+#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN	BIT(1)
+
+/* OMAP_RTC_PMIC bit fields: */
+#define OMAP_RTC_PMIC_POWER_EN_EN	BIT(16)
+#define OMAP_RTC_PMIC_EXT_WKUP_EN(x)	BIT(x)
+#define OMAP_RTC_PMIC_EXT_WKUP_POL(x)	BIT(4 + x)
+
+/* OMAP_RTC_KICKER values */
+#define	KICK0_VALUE			0x83e70b13
+#define	KICK1_VALUE			0x95a4f1e0
+
+struct omap_rtc;
+
+struct omap_rtc_device_type {
+	bool has_32kclk_en;
+	bool has_irqwakeen;
+	bool has_pmic_mode;
+	bool has_power_up_reset;
+	void (*lock)(struct omap_rtc *rtc);
+	void (*unlock)(struct omap_rtc *rtc);
+};
+
+struct omap_rtc {
+	struct rtc_device *rtc;
+	void __iomem *base;
+	struct clk *clk;
+	int irq_alarm;
+	int irq_timer;
+	u8 interrupts_reg;
+	bool is_pmic_controller;
+	bool has_ext_clk;
+	bool is_suspending;
+	const struct omap_rtc_device_type *type;
+	struct pinctrl_dev *pctldev;
+};
+
+static inline u8 rtc_read(struct omap_rtc *rtc, unsigned int reg)
+{
+	return readb(rtc->base + reg);
+}
+
+static inline u32 rtc_readl(struct omap_rtc *rtc, unsigned int reg)
+{
+	return readl(rtc->base + reg);
+}
+
+static inline void rtc_write(struct omap_rtc *rtc, unsigned int reg, u8 val)
+{
+	writeb(val, rtc->base + reg);
+}
+
+static inline void rtc_writel(struct omap_rtc *rtc, unsigned int reg, u32 val)
+{
+	writel(val, rtc->base + reg);
+}
+
+static void am3352_rtc_unlock(struct omap_rtc *rtc)
+{
+	rtc_writel(rtc, OMAP_RTC_KICK0_REG, KICK0_VALUE);
+	rtc_writel(rtc, OMAP_RTC_KICK1_REG, KICK1_VALUE);
+}
+
+static void am3352_rtc_lock(struct omap_rtc *rtc)
+{
+	rtc_writel(rtc, OMAP_RTC_KICK0_REG, 0);
+	rtc_writel(rtc, OMAP_RTC_KICK1_REG, 0);
+}
+
+static void default_rtc_unlock(struct omap_rtc *rtc)
+{
+}
+
+static void default_rtc_lock(struct omap_rtc *rtc)
+{
+}
+
+/*
+ * We rely on the rtc framework to handle locking (rtc->ops_lock),
+ * so the only other requirement is that register accesses which
+ * require BUSY to be clear are made with IRQs locally disabled
+ */
+static void rtc_wait_not_busy(struct omap_rtc *rtc)
+{
+	int count;
+	u8 status;
+
+	/* BUSY may stay active for 1/32768 second (~30 usec) */
+	for (count = 0; count < 50; count++) {
+		status = rtc_read(rtc, OMAP_RTC_STATUS_REG);
+		if (!(status & OMAP_RTC_STATUS_BUSY))
+			break;
+		udelay(1);
+	}
+	/* now we have ~15 usec to read/write various registers */
+}
+
+static irqreturn_t rtc_irq(int irq, void *dev_id)
+{
+	struct omap_rtc	*rtc = dev_id;
+	unsigned long events = 0;
+	u8 irq_data;
+
+	irq_data = rtc_read(rtc, OMAP_RTC_STATUS_REG);
+
+	/* alarm irq? */
+	if (irq_data & OMAP_RTC_STATUS_ALARM) {
+		rtc->type->unlock(rtc);
+		rtc_write(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM);
+		rtc->type->lock(rtc);
+		events |= RTC_IRQF | RTC_AF;
+	}
+
+	/* 1/sec periodic/update irq? */
+	if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
+		events |= RTC_IRQF | RTC_UF;
+
+	rtc_update_irq(rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+	u8 reg, irqwake_reg = 0;
+
+	local_irq_disable();
+	rtc_wait_not_busy(rtc);
+	reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+	if (rtc->type->has_irqwakeen)
+		irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
+
+	if (enabled) {
+		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
+		irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
+	} else {
+		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
+		irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
+	}
+	rtc_wait_not_busy(rtc);
+	rtc->type->unlock(rtc);
+	rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
+	if (rtc->type->has_irqwakeen)
+		rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
+	rtc->type->lock(rtc);
+	local_irq_enable();
+
+	return 0;
+}
+
+/* this hardware doesn't support "don't care" alarm fields */
+static int tm2bcd(struct rtc_time *tm)
+{
+	if (rtc_valid_tm(tm) != 0)
+		return -EINVAL;
+
+	tm->tm_sec = bin2bcd(tm->tm_sec);
+	tm->tm_min = bin2bcd(tm->tm_min);
+	tm->tm_hour = bin2bcd(tm->tm_hour);
+	tm->tm_mday = bin2bcd(tm->tm_mday);
+
+	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
+
+	/* epoch == 1900 */
+	if (tm->tm_year < 100 || tm->tm_year > 199)
+		return -EINVAL;
+	tm->tm_year = bin2bcd(tm->tm_year - 100);
+
+	return 0;
+}
+
+static void bcd2tm(struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
+	/* epoch == 1900 */
+	tm->tm_year = bcd2bin(tm->tm_year) + 100;
+}
+
+static void omap_rtc_read_time_raw(struct omap_rtc *rtc, struct rtc_time *tm)
+{
+	tm->tm_sec = rtc_read(rtc, OMAP_RTC_SECONDS_REG);
+	tm->tm_min = rtc_read(rtc, OMAP_RTC_MINUTES_REG);
+	tm->tm_hour = rtc_read(rtc, OMAP_RTC_HOURS_REG);
+	tm->tm_mday = rtc_read(rtc, OMAP_RTC_DAYS_REG);
+	tm->tm_mon = rtc_read(rtc, OMAP_RTC_MONTHS_REG);
+	tm->tm_year = rtc_read(rtc, OMAP_RTC_YEARS_REG);
+}
+
+static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+
+	/* we don't report wday/yday/isdst ... */
+	local_irq_disable();
+	rtc_wait_not_busy(rtc);
+	omap_rtc_read_time_raw(rtc, tm);
+	local_irq_enable();
+
+	bcd2tm(tm);
+
+	return 0;
+}
+
+static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+
+	if (tm2bcd(tm) < 0)
+		return -EINVAL;
+
+	local_irq_disable();
+	rtc_wait_not_busy(rtc);
+
+	rtc->type->unlock(rtc);
+	rtc_write(rtc, OMAP_RTC_YEARS_REG, tm->tm_year);
+	rtc_write(rtc, OMAP_RTC_MONTHS_REG, tm->tm_mon);
+	rtc_write(rtc, OMAP_RTC_DAYS_REG, tm->tm_mday);
+	rtc_write(rtc, OMAP_RTC_HOURS_REG, tm->tm_hour);
+	rtc_write(rtc, OMAP_RTC_MINUTES_REG, tm->tm_min);
+	rtc_write(rtc, OMAP_RTC_SECONDS_REG, tm->tm_sec);
+	rtc->type->lock(rtc);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+	u8 interrupts;
+
+	local_irq_disable();
+	rtc_wait_not_busy(rtc);
+
+	alm->time.tm_sec = rtc_read(rtc, OMAP_RTC_ALARM_SECONDS_REG);
+	alm->time.tm_min = rtc_read(rtc, OMAP_RTC_ALARM_MINUTES_REG);
+	alm->time.tm_hour = rtc_read(rtc, OMAP_RTC_ALARM_HOURS_REG);
+	alm->time.tm_mday = rtc_read(rtc, OMAP_RTC_ALARM_DAYS_REG);
+	alm->time.tm_mon = rtc_read(rtc, OMAP_RTC_ALARM_MONTHS_REG);
+	alm->time.tm_year = rtc_read(rtc, OMAP_RTC_ALARM_YEARS_REG);
+
+	local_irq_enable();
+
+	bcd2tm(&alm->time);
+
+	interrupts = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+	alm->enabled = !!(interrupts & OMAP_RTC_INTERRUPTS_IT_ALARM);
+
+	return 0;
+}
+
+static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+	u8 reg, irqwake_reg = 0;
+
+	if (tm2bcd(&alm->time) < 0)
+		return -EINVAL;
+
+	local_irq_disable();
+	rtc_wait_not_busy(rtc);
+
+	rtc->type->unlock(rtc);
+	rtc_write(rtc, OMAP_RTC_ALARM_YEARS_REG, alm->time.tm_year);
+	rtc_write(rtc, OMAP_RTC_ALARM_MONTHS_REG, alm->time.tm_mon);
+	rtc_write(rtc, OMAP_RTC_ALARM_DAYS_REG, alm->time.tm_mday);
+	rtc_write(rtc, OMAP_RTC_ALARM_HOURS_REG, alm->time.tm_hour);
+	rtc_write(rtc, OMAP_RTC_ALARM_MINUTES_REG, alm->time.tm_min);
+	rtc_write(rtc, OMAP_RTC_ALARM_SECONDS_REG, alm->time.tm_sec);
+
+	reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+	if (rtc->type->has_irqwakeen)
+		irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
+
+	if (alm->enabled) {
+		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
+		irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
+	} else {
+		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
+		irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
+	}
+	rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
+	if (rtc->type->has_irqwakeen)
+		rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
+	rtc->type->lock(rtc);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+static struct omap_rtc *omap_rtc_power_off_rtc;
+
+/*
+ * omap_rtc_poweroff: RTC-controlled power off
+ *
+ * The RTC can be used to control an external PMIC via the pmic_power_en pin,
+ * which can be configured to transition to OFF on ALARM2 events.
+ *
+ * Notes:
+ * The two-second alarm offset is the shortest offset possible as the alarm
+ * registers must be set before the next timer update and the offset
+ * calculation is too heavy for everything to be done within a single access
+ * period (~15 us).
+ *
+ * Called with local interrupts disabled.
+ */
+static void omap_rtc_power_off(void)
+{
+	struct omap_rtc *rtc = omap_rtc_power_off_rtc;
+	struct rtc_time tm;
+	unsigned long now;
+	u32 val;
+
+	rtc->type->unlock(rtc);
+	/* enable pmic_power_en control */
+	val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
+	rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN);
+
+	/* set alarm two seconds from now */
+	omap_rtc_read_time_raw(rtc, &tm);
+	bcd2tm(&tm);
+	rtc_tm_to_time(&tm, &now);
+	rtc_time_to_tm(now + 2, &tm);
+
+	if (tm2bcd(&tm) < 0) {
+		dev_err(&rtc->rtc->dev, "power off failed\n");
+		return;
+	}
+
+	rtc_wait_not_busy(rtc);
+
+	rtc_write(rtc, OMAP_RTC_ALARM2_SECONDS_REG, tm.tm_sec);
+	rtc_write(rtc, OMAP_RTC_ALARM2_MINUTES_REG, tm.tm_min);
+	rtc_write(rtc, OMAP_RTC_ALARM2_HOURS_REG, tm.tm_hour);
+	rtc_write(rtc, OMAP_RTC_ALARM2_DAYS_REG, tm.tm_mday);
+	rtc_write(rtc, OMAP_RTC_ALARM2_MONTHS_REG, tm.tm_mon);
+	rtc_write(rtc, OMAP_RTC_ALARM2_YEARS_REG, tm.tm_year);
+
+	/*
+	 * enable ALARM2 interrupt
+	 *
+	 * NOTE: this fails on AM3352 if rtc_write (writeb) is used
+	 */
+	val = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+	rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG,
+			val | OMAP_RTC_INTERRUPTS_IT_ALARM2);
+	rtc->type->lock(rtc);
+
+	/*
+	 * Wait for alarm to trigger (within two seconds) and external PMIC to
+	 * power off the system. Add a 500 ms margin for external latencies
+	 * (e.g. debounce circuits).
+	 */
+	mdelay(2500);
+}
+
+static const struct rtc_class_ops omap_rtc_ops = {
+	.read_time	= omap_rtc_read_time,
+	.set_time	= omap_rtc_set_time,
+	.read_alarm	= omap_rtc_read_alarm,
+	.set_alarm	= omap_rtc_set_alarm,
+	.alarm_irq_enable = omap_rtc_alarm_irq_enable,
+};
+
+static const struct omap_rtc_device_type omap_rtc_default_type = {
+	.has_power_up_reset = true,
+	.lock		= default_rtc_lock,
+	.unlock		= default_rtc_unlock,
+};
+
+static const struct omap_rtc_device_type omap_rtc_am3352_type = {
+	.has_32kclk_en	= true,
+	.has_irqwakeen	= true,
+	.has_pmic_mode	= true,
+	.lock		= am3352_rtc_lock,
+	.unlock		= am3352_rtc_unlock,
+};
+
+static const struct omap_rtc_device_type omap_rtc_da830_type = {
+	.lock		= am3352_rtc_lock,
+	.unlock		= am3352_rtc_unlock,
+};
+
+static const struct platform_device_id omap_rtc_id_table[] = {
+	{
+		.name	= "omap_rtc",
+		.driver_data = (kernel_ulong_t)&omap_rtc_default_type,
+	}, {
+		.name	= "am3352-rtc",
+		.driver_data = (kernel_ulong_t)&omap_rtc_am3352_type,
+	}, {
+		.name	= "da830-rtc",
+		.driver_data = (kernel_ulong_t)&omap_rtc_da830_type,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, omap_rtc_id_table);
+
+static const struct of_device_id omap_rtc_of_match[] = {
+	{
+		.compatible	= "ti,am3352-rtc",
+		.data		= &omap_rtc_am3352_type,
+	}, {
+		.compatible	= "ti,da830-rtc",
+		.data		= &omap_rtc_da830_type,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
+
+static const struct pinctrl_pin_desc rtc_pins_desc[] = {
+	PINCTRL_PIN(0, "ext_wakeup0"),
+	PINCTRL_PIN(1, "ext_wakeup1"),
+	PINCTRL_PIN(2, "ext_wakeup2"),
+	PINCTRL_PIN(3, "ext_wakeup3"),
+};
+
+static int rtc_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 0;
+}
+
+static const char *rtc_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+					unsigned int group)
+{
+	return NULL;
+}
+
+static const struct pinctrl_ops rtc_pinctrl_ops = {
+	.get_groups_count = rtc_pinctrl_get_groups_count,
+	.get_group_name = rtc_pinctrl_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinconf_generic_dt_free_map,
+};
+
+#define PIN_CONFIG_ACTIVE_HIGH		(PIN_CONFIG_END + 1)
+
+static const struct pinconf_generic_params rtc_params[] = {
+	{"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const struct pin_config_item rtc_conf_items[ARRAY_SIZE(rtc_params)] = {
+	PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
+};
+#endif
+
+static int rtc_pinconf_get(struct pinctrl_dev *pctldev,
+			unsigned int pin, unsigned long *config)
+{
+	struct omap_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int param = pinconf_to_config_param(*config);
+	u32 val;
+	u16 arg = 0;
+
+	rtc->type->unlock(rtc);
+	val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
+	rtc->type->lock(rtc);
+
+	switch (param) {
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (!(val & OMAP_RTC_PMIC_EXT_WKUP_EN(pin)))
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_ACTIVE_HIGH:
+		if (val & OMAP_RTC_PMIC_EXT_WKUP_POL(pin))
+			return -EINVAL;
+		break;
+	default:
+		return -ENOTSUPP;
+	};
+
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int rtc_pinconf_set(struct pinctrl_dev *pctldev,
+			unsigned int pin, unsigned long *configs,
+			unsigned int num_configs)
+{
+	struct omap_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
+	u32 val;
+	unsigned int param;
+	u32 param_val;
+	int i;
+
+	rtc->type->unlock(rtc);
+	val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
+	rtc->type->lock(rtc);
+
+	/* active low by default */
+	val |= OMAP_RTC_PMIC_EXT_WKUP_POL(pin);
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		param_val = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_INPUT_ENABLE:
+			if (param_val)
+				val |= OMAP_RTC_PMIC_EXT_WKUP_EN(pin);
+			else
+				val &= ~OMAP_RTC_PMIC_EXT_WKUP_EN(pin);
+			break;
+		case PIN_CONFIG_ACTIVE_HIGH:
+			val &= ~OMAP_RTC_PMIC_EXT_WKUP_POL(pin);
+			break;
+		default:
+			dev_err(&rtc->rtc->dev, "Property %u not supported\n",
+				param);
+			return -ENOTSUPP;
+		}
+	}
+
+	rtc->type->unlock(rtc);
+	rtc_writel(rtc, OMAP_RTC_PMIC_REG, val);
+	rtc->type->lock(rtc);
+
+	return 0;
+}
+
+static const struct pinconf_ops rtc_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = rtc_pinconf_get,
+	.pin_config_set = rtc_pinconf_set,
+};
+
+static struct pinctrl_desc rtc_pinctrl_desc = {
+	.pins = rtc_pins_desc,
+	.npins = ARRAY_SIZE(rtc_pins_desc),
+	.pctlops = &rtc_pinctrl_ops,
+	.confops = &rtc_pinconf_ops,
+	.custom_params = rtc_params,
+	.num_custom_params = ARRAY_SIZE(rtc_params),
+#ifdef CONFIG_DEBUG_FS
+	.custom_conf_items = rtc_conf_items,
+#endif
+	.owner = THIS_MODULE,
+};
+
+static int omap_rtc_probe(struct platform_device *pdev)
+{
+	struct omap_rtc	*rtc;
+	struct resource	*res;
+	u8 reg, mask, new_ctrl;
+	const struct platform_device_id *id_entry;
+	const struct of_device_id *of_id;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
+	if (of_id) {
+		rtc->type = of_id->data;
+		rtc->is_pmic_controller = rtc->type->has_pmic_mode &&
+				of_property_read_bool(pdev->dev.of_node,
+						"system-power-controller");
+	} else {
+		id_entry = platform_get_device_id(pdev);
+		rtc->type = (void *)id_entry->driver_data;
+	}
+
+	rtc->irq_timer = platform_get_irq(pdev, 0);
+	if (rtc->irq_timer <= 0)
+		return -ENOENT;
+
+	rtc->irq_alarm = platform_get_irq(pdev, 1);
+	if (rtc->irq_alarm <= 0)
+		return -ENOENT;
+
+	rtc->clk = devm_clk_get(&pdev->dev, "ext-clk");
+	if (!IS_ERR(rtc->clk))
+		rtc->has_ext_clk = true;
+	else
+		rtc->clk = devm_clk_get(&pdev->dev, "int-clk");
+
+	if (!IS_ERR(rtc->clk))
+		clk_prepare_enable(rtc->clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->base))
+		return PTR_ERR(rtc->base);
+
+	platform_set_drvdata(pdev, rtc);
+
+	/* Enable the clock/module so that we can access the registers */
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	rtc->type->unlock(rtc);
+
+	/*
+	 * disable interrupts
+	 *
+	 * NOTE: ALARM2 is not cleared on AM3352 if rtc_write (writeb) is used
+	 */
+	rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
+
+	/* enable RTC functional clock */
+	if (rtc->type->has_32kclk_en) {
+		reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
+		rtc_writel(rtc, OMAP_RTC_OSC_REG,
+				reg | OMAP_RTC_OSC_32KCLK_EN);
+	}
+
+	/* clear old status */
+	reg = rtc_read(rtc, OMAP_RTC_STATUS_REG);
+
+	mask = OMAP_RTC_STATUS_ALARM;
+
+	if (rtc->type->has_pmic_mode)
+		mask |= OMAP_RTC_STATUS_ALARM2;
+
+	if (rtc->type->has_power_up_reset) {
+		mask |= OMAP_RTC_STATUS_POWER_UP;
+		if (reg & OMAP_RTC_STATUS_POWER_UP)
+			dev_info(&pdev->dev, "RTC power up reset detected\n");
+	}
+
+	if (reg & mask)
+		rtc_write(rtc, OMAP_RTC_STATUS_REG, reg & mask);
+
+	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
+	reg = rtc_read(rtc, OMAP_RTC_CTRL_REG);
+	if (reg & OMAP_RTC_CTRL_STOP)
+		dev_info(&pdev->dev, "already running\n");
+
+	/* force to 24 hour mode */
+	new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT | OMAP_RTC_CTRL_AUTO_COMP);
+	new_ctrl |= OMAP_RTC_CTRL_STOP;
+
+	/*
+	 * BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
+	 *
+	 *  - Device wake-up capability setting should come through chip
+	 *    init logic. OMAP1 boards should initialize the "wakeup capable"
+	 *    flag in the platform device if the board is wired right for
+	 *    being woken up by RTC alarm. For OMAP-L138, this capability
+	 *    is built into the SoC by the "Deep Sleep" capability.
+	 *
+	 *  - Boards wired so RTC_ON_nOFF is used as the reset signal,
+	 *    rather than nPWRON_RESET, should forcibly enable split
+	 *    power mode.  (Some chip errata report that RTC_CTRL_SPLIT
+	 *    is write-only, and always reads as zero...)
+	 */
+
+	if (new_ctrl & OMAP_RTC_CTRL_SPLIT)
+		dev_info(&pdev->dev, "split power mode\n");
+
+	if (reg != new_ctrl)
+		rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
+
+	/*
+	 * If we have the external clock then switch to it so we can keep
+	 * ticking across suspend.
+	 */
+	if (rtc->has_ext_clk) {
+		reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
+		reg &= ~OMAP_RTC_OSC_OSC32K_GZ_DISABLE;
+		reg |= OMAP_RTC_OSC_32KCLK_EN | OMAP_RTC_OSC_SEL_32KCLK_SRC;
+		rtc_writel(rtc, OMAP_RTC_OSC_REG, reg);
+	}
+
+	rtc->type->lock(rtc);
+
+	device_init_wakeup(&pdev->dev, true);
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+			&omap_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		goto err;
+	}
+
+	/* handle periodic and alarm irqs */
+	ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0,
+			dev_name(&rtc->rtc->dev), rtc);
+	if (ret)
+		goto err;
+
+	if (rtc->irq_timer != rtc->irq_alarm) {
+		ret = devm_request_irq(&pdev->dev, rtc->irq_alarm, rtc_irq, 0,
+				dev_name(&rtc->rtc->dev), rtc);
+		if (ret)
+			goto err;
+	}
+
+	/* Support ext_wakeup pinconf */
+	rtc_pinctrl_desc.name = dev_name(&pdev->dev);
+
+	rtc->pctldev = pinctrl_register(&rtc_pinctrl_desc, &pdev->dev, rtc);
+	if (IS_ERR(rtc->pctldev)) {
+		dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+		ret = PTR_ERR(rtc->pctldev);
+		goto err;
+	}
+
+	if (rtc->is_pmic_controller) {
+		if (!pm_power_off) {
+			omap_rtc_power_off_rtc = rtc;
+			pm_power_off = omap_rtc_power_off;
+		}
+	}
+
+	return 0;
+
+err:
+	device_init_wakeup(&pdev->dev, false);
+	rtc->type->lock(rtc);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int omap_rtc_remove(struct platform_device *pdev)
+{
+	struct omap_rtc *rtc = platform_get_drvdata(pdev);
+	u8 reg;
+
+	if (pm_power_off == omap_rtc_power_off &&
+			omap_rtc_power_off_rtc == rtc) {
+		pm_power_off = NULL;
+		omap_rtc_power_off_rtc = NULL;
+	}
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	if (!IS_ERR(rtc->clk))
+		clk_disable_unprepare(rtc->clk);
+
+	rtc->type->unlock(rtc);
+	/* leave rtc running, but disable irqs */
+	rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
+
+	if (rtc->has_ext_clk) {
+		reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
+		reg &= ~OMAP_RTC_OSC_SEL_32KCLK_SRC;
+		rtc_write(rtc, OMAP_RTC_OSC_REG, reg);
+	}
+
+	rtc->type->lock(rtc);
+
+	/* Disable the clock/module */
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	/* Remove ext_wakeup pinconf */
+	pinctrl_unregister(rtc->pctldev);
+
+	return 0;
+}
+
+static int __maybe_unused omap_rtc_suspend(struct device *dev)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc->interrupts_reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+
+	rtc->type->unlock(rtc);
+	/*
+	 * FIXME: the RTC alarm is not currently acting as a wakeup event
+	 * source on some platforms, and in fact this enable() call is just
+	 * saving a flag that's never used...
+	 */
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq_alarm);
+	else
+		rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
+	rtc->type->lock(rtc);
+
+	rtc->is_suspending = true;
+
+	return 0;
+}
+
+static int __maybe_unused omap_rtc_resume(struct device *dev)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc->type->unlock(rtc);
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq_alarm);
+	else
+		rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg);
+	rtc->type->lock(rtc);
+
+	rtc->is_suspending = false;
+
+	return 0;
+}
+
+static int __maybe_unused omap_rtc_runtime_suspend(struct device *dev)
+{
+	struct omap_rtc *rtc = dev_get_drvdata(dev);
+
+	if (rtc->is_suspending && !rtc->has_ext_clk)
+		return -EBUSY;
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_rtc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(omap_rtc_suspend, omap_rtc_resume)
+	SET_RUNTIME_PM_OPS(omap_rtc_runtime_suspend, NULL, NULL)
+};
+
+static void omap_rtc_shutdown(struct platform_device *pdev)
+{
+	struct omap_rtc *rtc = platform_get_drvdata(pdev);
+	u8 mask;
+
+	/*
+	 * Keep the ALARM interrupt enabled to allow the system to power up on
+	 * alarm events.
+	 */
+	rtc->type->unlock(rtc);
+	mask = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+	mask &= OMAP_RTC_INTERRUPTS_IT_ALARM;
+	rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, mask);
+	rtc->type->lock(rtc);
+}
+
+static struct platform_driver omap_rtc_driver = {
+	.probe		= omap_rtc_probe,
+	.remove		= omap_rtc_remove,
+	.shutdown	= omap_rtc_shutdown,
+	.driver		= {
+		.name	= "omap_rtc",
+		.pm	= &omap_rtc_pm_ops,
+		.of_match_table = omap_rtc_of_match,
+	},
+	.id_table	= omap_rtc_id_table,
+};
+
+module_platform_driver(omap_rtc_driver);
+
+MODULE_ALIAS("platform:omap_rtc");
+MODULE_AUTHOR("George G. Davis (and others)");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-opal.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-opal.c
new file mode 100644
index 0000000..60f2250
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-opal.c
@@ -0,0 +1,310 @@
+/*
+ * IBM OPAL RTC driver
+ * Copyright (C) 2014 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRVNAME		"rtc-opal"
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
+{
+	tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) +
+		       bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
+	tm->tm_mon  = bcd2bin((y_m_d >> 8) & 0xff) - 1;
+	tm->tm_mday = bcd2bin(y_m_d & 0xff);
+	tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff);
+	tm->tm_min  = bcd2bin((h_m_s_ms >> 48) & 0xff);
+	tm->tm_sec  = bcd2bin((h_m_s_ms >> 40) & 0xff);
+
+	tm->tm_wday = -1;
+}
+
+static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms)
+{
+	*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
+	*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
+	*y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
+	*y_m_d |= ((u32)bin2bcd(tm->tm_mday));
+
+	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
+	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
+	*h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
+}
+
+static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+	s64 rc = OPAL_BUSY;
+	int retries = 10;
+	u32 y_m_d;
+	u64 h_m_s_ms;
+	__be32 __y_m_d;
+	__be64 __h_m_s_ms;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
+		if (rc == OPAL_BUSY_EVENT) {
+			msleep(OPAL_BUSY_DELAY_MS);
+			opal_poll_events(NULL);
+		} else if (rc == OPAL_BUSY) {
+			msleep(OPAL_BUSY_DELAY_MS);
+		} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
+			if (retries--) {
+				msleep(10); /* Wait 10ms before retry */
+				rc = OPAL_BUSY; /* go around again */
+			}
+		}
+	}
+
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	y_m_d = be32_to_cpu(__y_m_d);
+	h_m_s_ms = be64_to_cpu(__h_m_s_ms);
+	opal_to_tm(y_m_d, h_m_s_ms, tm);
+
+	return 0;
+}
+
+static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+	s64 rc = OPAL_BUSY;
+	int retries = 10;
+	u32 y_m_d = 0;
+	u64 h_m_s_ms = 0;
+
+	tm_to_opal(tm, &y_m_d, &h_m_s_ms);
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_rtc_write(y_m_d, h_m_s_ms);
+		if (rc == OPAL_BUSY_EVENT) {
+			msleep(OPAL_BUSY_DELAY_MS);
+			opal_poll_events(NULL);
+		} else if (rc == OPAL_BUSY) {
+			msleep(OPAL_BUSY_DELAY_MS);
+		} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
+			if (retries--) {
+				msleep(10); /* Wait 10ms before retry */
+				rc = OPAL_BUSY; /* go around again */
+			}
+		}
+	}
+
+	return rc == OPAL_SUCCESS ? 0 : -EIO;
+}
+
+/*
+ * TPO	Timed Power-On
+ *
+ * TPO get/set OPAL calls care about the hour and min and to make it consistent
+ * with the rtc utility time conversion functions, we use the 'u64' to store
+ * its value and perform bit shift by 32 before use..
+ */
+static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	__be32 __y_m_d, __h_m;
+	struct opal_msg msg;
+	int rc, token;
+	u64 h_m_s_ms;
+	u32 y_m_d;
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			pr_err("Failed to get the async token\n");
+
+		return token;
+	}
+
+	rc = opal_tpo_read(token, &__y_m_d, &__h_m);
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	if (rc) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	rc = opal_get_async_rc(msg);
+	if (rc != OPAL_SUCCESS) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	y_m_d = be32_to_cpu(__y_m_d);
+	h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32);
+
+	/* check if no alarm is set */
+	if (y_m_d == 0 && h_m_s_ms == 0) {
+		pr_debug("No alarm is set\n");
+		rc = -ENOENT;
+		goto exit;
+	} else {
+		pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
+	}
+
+	opal_to_tm(y_m_d, h_m_s_ms, &alarm->time);
+
+exit:
+	opal_async_release_token(token);
+	return rc;
+}
+
+/* Set Timed Power-On */
+static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	u64 h_m_s_ms = 0;
+	struct opal_msg msg;
+	u32 y_m_d = 0;
+	int token, rc;
+
+	/* if alarm is enabled */
+	if (alarm->enabled) {
+		tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
+		pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
+
+	} else {
+		pr_debug("Alarm getting disabled\n");
+	}
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			pr_err("Failed to get the async token\n");
+
+		return token;
+	}
+
+	/* TPO, we care about hour and minute */
+	rc = opal_tpo_write(token, y_m_d,
+			    (u32)((h_m_s_ms >> 32) & 0xffff0000));
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	if (rc) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	rc = opal_get_async_rc(msg);
+	if (rc != OPAL_SUCCESS)
+		rc = -EIO;
+
+exit:
+	opal_async_release_token(token);
+	return rc;
+}
+
+int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rtc_wkalrm alarm = { .enabled = 0 };
+
+	/*
+	 * TPO is automatically enabled when opal_set_tpo_time() is called with
+	 * non-zero rtc-time. We only handle disable case which needs to be
+	 * explicitly told to opal.
+	 */
+	return enabled ? 0 : opal_set_tpo_time(dev, &alarm);
+}
+
+static struct rtc_class_ops opal_rtc_ops = {
+	.read_time	= opal_get_rtc_time,
+	.set_time	= opal_set_rtc_time,
+};
+
+static int opal_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+
+	if (pdev->dev.of_node &&
+	    (of_property_read_bool(pdev->dev.of_node, "wakeup-source") ||
+	     of_property_read_bool(pdev->dev.of_node, "has-tpo")/* legacy */)) {
+		device_set_wakeup_capable(&pdev->dev, true);
+		opal_rtc_ops.read_alarm	= opal_get_tpo_time;
+		opal_rtc_ops.set_alarm = opal_set_tpo_time;
+		opal_rtc_ops.alarm_irq_enable = opal_tpo_alarm_irq_enable;
+	}
+
+	rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops,
+				       THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	rtc->uie_unsupported = 1;
+
+	return 0;
+}
+
+static const struct of_device_id opal_rtc_match[] = {
+	{
+		.compatible	= "ibm,opal-rtc",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, opal_rtc_match);
+
+static const struct platform_device_id opal_rtc_driver_ids[] = {
+	{
+		.name		= "opal-rtc",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids);
+
+static struct platform_driver opal_rtc_driver = {
+	.probe		= opal_rtc_probe,
+	.id_table	= opal_rtc_driver_ids,
+	.driver		= {
+		.name		= DRVNAME,
+		.of_match_table	= opal_rtc_match,
+	},
+};
+
+static int __init opal_rtc_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	return platform_driver_register(&opal_rtc_driver);
+}
+
+static void __exit opal_rtc_exit(void)
+{
+	platform_driver_unregister(&opal_rtc_driver);
+}
+
+MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM OPAL RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(opal_rtc_init);
+module_exit(opal_rtc_exit);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-palmas.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-palmas.c
new file mode 100644
index 0000000..34aea38
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-palmas.c
@@ -0,0 +1,412 @@
+/*
+ * rtc-palmas.c -- Palmas Real Time Clock driver.
+
+ * RTC driver for TI Palma series devices like TPS65913,
+ * TPS65914 power management IC.
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/bcd.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/palmas.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+struct palmas_rtc {
+	struct rtc_device	*rtc;
+	struct device		*dev;
+	unsigned int		irq;
+};
+
+/* Total number of RTC registers needed to set time*/
+#define PALMAS_NUM_TIME_REGS	(PALMAS_YEARS_REG - PALMAS_SECONDS_REG + 1)
+
+/*
+ * Special bin2bcd mapping to deal with bcd storage of year.
+ *
+ *   0-69                -> 0xD0
+ *  70-99  (1970 - 1999) -> 0xD0 - 0xF9 (correctly rolls to 0x00)
+ * 100-199 (2000 - 2099) -> 0x00 - 0x99 (does not roll to 0xA0 :-( )
+ * 200-229 (2100 - 2129) -> 0xA0 - 0xC9 (really for completeness)
+ * 230-                  -> 0xC9
+ *
+ * Confirmed: the only transition that does not work correctly for this rtc
+ * clock is the transition from 2099 to 2100, it proceeds to 2000. We will
+ * accept this issue since the clock retains and transitions the year correctly
+ * in all other conditions.
+ */
+static unsigned char year_bin2bcd(int val)
+{
+	if (val < 70)
+		return 0xD0;
+	if (val < 100)
+		return bin2bcd(val - 20) | 0x80; /* KISS leverage of bin2bcd */
+	if (val >= 230)
+		return 0xC9;
+	if (val >= 200)
+		return bin2bcd(val - 180) | 0x80;
+	return bin2bcd(val - 100);
+}
+
+static int year_bcd2bin(unsigned char val)
+{
+	if (val >= 0xD0)
+		return bcd2bin(val & 0x7F) + 20;
+	if (val >= 0xA0)
+		return bcd2bin(val & 0x7F) + 180;
+	return bcd2bin(val) + 100;
+}
+
+static int palmas_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char rtc_data[PALMAS_NUM_TIME_REGS];
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	int ret;
+
+	/* Copy RTC counting registers to static registers or latches */
+	ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG,
+		PALMAS_RTC_CTRL_REG_GET_TIME, PALMAS_RTC_CTRL_REG_GET_TIME);
+	if (ret < 0) {
+		dev_err(dev, "RTC CTRL reg update failed, err: %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_bulk_read(palmas, PALMAS_RTC_BASE, PALMAS_SECONDS_REG,
+			rtc_data, PALMAS_NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "RTC_SECONDS reg read failed, err = %d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0]);
+	tm->tm_min = bcd2bin(rtc_data[1]);
+	tm->tm_hour = bcd2bin(rtc_data[2]);
+	tm->tm_mday = bcd2bin(rtc_data[3]);
+	tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
+	tm->tm_year = year_bcd2bin(rtc_data[5]);
+
+	return ret;
+}
+
+static int palmas_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char rtc_data[PALMAS_NUM_TIME_REGS];
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	int ret;
+
+	rtc_data[0] = bin2bcd(tm->tm_sec);
+	rtc_data[1] = bin2bcd(tm->tm_min);
+	rtc_data[2] = bin2bcd(tm->tm_hour);
+	rtc_data[3] = bin2bcd(tm->tm_mday);
+	rtc_data[4] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[5] = year_bin2bcd(tm->tm_year);
+
+	/* Stop RTC while updating the RTC time registers */
+	ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG,
+		PALMAS_RTC_CTRL_REG_STOP_RTC, 0);
+	if (ret < 0) {
+		dev_err(dev, "RTC stop failed, err = %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_bulk_write(palmas, PALMAS_RTC_BASE, PALMAS_SECONDS_REG,
+		rtc_data, PALMAS_NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "RTC_SECONDS reg write failed, err = %d\n", ret);
+		return ret;
+	}
+
+	/* Start back RTC */
+	ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG,
+		PALMAS_RTC_CTRL_REG_STOP_RTC, PALMAS_RTC_CTRL_REG_STOP_RTC);
+	if (ret < 0)
+		dev_err(dev, "RTC start failed, err = %d\n", ret);
+	return ret;
+}
+
+static int palmas_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
+{
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	u8 val;
+
+	val = enabled ? PALMAS_RTC_INTERRUPTS_REG_IT_ALARM : 0;
+	return palmas_write(palmas, PALMAS_RTC_BASE,
+		PALMAS_RTC_INTERRUPTS_REG, val);
+}
+
+static int palmas_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char alarm_data[PALMAS_NUM_TIME_REGS];
+	u32 int_val;
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	int ret;
+
+	ret = palmas_bulk_read(palmas, PALMAS_RTC_BASE,
+			PALMAS_ALARM_SECONDS_REG,
+			alarm_data, PALMAS_NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "RTC_ALARM_SECONDS read failed, err = %d\n", ret);
+		return ret;
+	}
+
+	alm->time.tm_sec = bcd2bin(alarm_data[0]);
+	alm->time.tm_min = bcd2bin(alarm_data[1]);
+	alm->time.tm_hour = bcd2bin(alarm_data[2]);
+	alm->time.tm_mday = bcd2bin(alarm_data[3]);
+	alm->time.tm_mon = bcd2bin(alarm_data[4]) - 1;
+	alm->time.tm_year = year_bcd2bin(alarm_data[5]);
+
+	ret = palmas_read(palmas, PALMAS_RTC_BASE, PALMAS_RTC_INTERRUPTS_REG,
+			&int_val);
+	if (ret < 0) {
+		dev_err(dev, "RTC_INTERRUPTS reg read failed, err = %d\n", ret);
+		return ret;
+	}
+
+	if (int_val & PALMAS_RTC_INTERRUPTS_REG_IT_ALARM)
+		alm->enabled = 1;
+	return ret;
+}
+
+static int palmas_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char alarm_data[PALMAS_NUM_TIME_REGS];
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	int ret;
+
+	ret = palmas_rtc_alarm_irq_enable(dev, 0);
+	if (ret < 0) {
+		dev_err(dev, "Disable RTC alarm failed\n");
+		return ret;
+	}
+
+	alarm_data[0] = bin2bcd(alm->time.tm_sec);
+	alarm_data[1] = bin2bcd(alm->time.tm_min);
+	alarm_data[2] = bin2bcd(alm->time.tm_hour);
+	alarm_data[3] = bin2bcd(alm->time.tm_mday);
+	alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
+	alarm_data[5] = year_bin2bcd(alm->time.tm_year);
+
+	ret = palmas_bulk_write(palmas, PALMAS_RTC_BASE,
+		PALMAS_ALARM_SECONDS_REG, alarm_data, PALMAS_NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "ALARM_SECONDS_REG write failed, err = %d\n", ret);
+		return ret;
+	}
+
+	if (alm->enabled)
+		ret = palmas_rtc_alarm_irq_enable(dev, 1);
+	return ret;
+}
+
+static int palmas_clear_interrupts(struct device *dev)
+{
+	struct palmas *palmas = dev_get_drvdata(dev->parent);
+	unsigned int rtc_reg;
+	int ret;
+
+	ret = palmas_read(palmas, PALMAS_RTC_BASE, PALMAS_RTC_STATUS_REG,
+				&rtc_reg);
+	if (ret < 0) {
+		dev_err(dev, "RTC_STATUS read failed, err = %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_write(palmas, PALMAS_RTC_BASE, PALMAS_RTC_STATUS_REG,
+			rtc_reg);
+	if (ret < 0) {
+		dev_err(dev, "RTC_STATUS write failed, err = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static irqreturn_t palmas_rtc_interrupt(int irq, void *context)
+{
+	struct palmas_rtc *palmas_rtc = context;
+	struct device *dev = palmas_rtc->dev;
+	int ret;
+
+	ret = palmas_clear_interrupts(dev);
+	if (ret < 0) {
+		dev_err(dev, "RTC interrupt clear failed, err = %d\n", ret);
+		return IRQ_NONE;
+	}
+
+	rtc_update_irq(palmas_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops palmas_rtc_ops = {
+	.read_time	= palmas_rtc_read_time,
+	.set_time	= palmas_rtc_set_time,
+	.read_alarm	= palmas_rtc_read_alarm,
+	.set_alarm	= palmas_rtc_set_alarm,
+	.alarm_irq_enable = palmas_rtc_alarm_irq_enable,
+};
+
+static int palmas_rtc_probe(struct platform_device *pdev)
+{
+	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+	struct palmas_rtc *palmas_rtc = NULL;
+	int ret;
+	bool enable_bb_charging = false;
+	bool high_bb_charging = false;
+
+	if (pdev->dev.of_node) {
+		enable_bb_charging = of_property_read_bool(pdev->dev.of_node,
+					"ti,backup-battery-chargeable");
+		high_bb_charging = of_property_read_bool(pdev->dev.of_node,
+					"ti,backup-battery-charge-high-current");
+	}
+
+	palmas_rtc = devm_kzalloc(&pdev->dev, sizeof(struct palmas_rtc),
+			GFP_KERNEL);
+	if (!palmas_rtc)
+		return -ENOMEM;
+
+	/* Clear pending interrupts */
+	ret = palmas_clear_interrupts(&pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clear RTC int failed, err = %d\n", ret);
+		return ret;
+	}
+
+	palmas_rtc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, palmas_rtc);
+
+	if (enable_bb_charging) {
+		unsigned reg = PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG;
+
+		if (high_bb_charging)
+			reg = 0;
+
+		ret = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+			PALMAS_BACKUP_BATTERY_CTRL,
+			PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG, reg);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"BACKUP_BATTERY_CTRL update failed, %d\n", ret);
+			return ret;
+		}
+
+		ret = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+			PALMAS_BACKUP_BATTERY_CTRL,
+			PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN,
+			PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"BACKUP_BATTERY_CTRL update failed, %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Start RTC */
+	ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG,
+			PALMAS_RTC_CTRL_REG_STOP_RTC,
+			PALMAS_RTC_CTRL_REG_STOP_RTC);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "RTC_CTRL write failed, err = %d\n", ret);
+		return ret;
+	}
+
+	palmas_rtc->irq = platform_get_irq(pdev, 0);
+
+	device_init_wakeup(&pdev->dev, 1);
+	palmas_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				&palmas_rtc_ops, THIS_MODULE);
+	if (IS_ERR(palmas_rtc->rtc)) {
+		ret = PTR_ERR(palmas_rtc->rtc);
+		dev_err(&pdev->dev, "RTC register failed, err = %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, palmas_rtc->irq, NULL,
+			palmas_rtc_interrupt,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+			dev_name(&pdev->dev), palmas_rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "IRQ request failed, err = %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int palmas_rtc_remove(struct platform_device *pdev)
+{
+	palmas_rtc_alarm_irq_enable(&pdev->dev, 0);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int palmas_rtc_suspend(struct device *dev)
+{
+	struct palmas_rtc *palmas_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(palmas_rtc->irq);
+	return 0;
+}
+
+static int palmas_rtc_resume(struct device *dev)
+{
+	struct palmas_rtc *palmas_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(palmas_rtc->irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(palmas_rtc_pm_ops, palmas_rtc_suspend,
+			 palmas_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_palmas_rtc_match[] = {
+	{ .compatible = "ti,palmas-rtc"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_palmas_rtc_match);
+#endif
+
+static struct platform_driver palmas_rtc_driver = {
+	.probe		= palmas_rtc_probe,
+	.remove		= palmas_rtc_remove,
+	.driver		= {
+		.name	= "palmas-rtc",
+		.pm	= &palmas_rtc_pm_ops,
+		.of_match_table = of_match_ptr(of_palmas_rtc_match),
+	},
+};
+
+module_platform_driver(palmas_rtc_driver);
+
+MODULE_ALIAS("platform:palmas_rtc");
+MODULE_DESCRIPTION("TI PALMAS series RTC driver");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcap.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcap.c
new file mode 100644
index 0000000..c443324
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcap.c
@@ -0,0 +1,194 @@
+/*
+ *  pcap rtc code for Motorola EZX phones
+ *
+ *  Copyright (c) 2008 guiming zhuo <gmzhuo@gmail.com>
+ *  Copyright (c) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ *  Based on Motorola's rtc.c Copyright (c) 2003-2005 Motorola
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mfd/ezx-pcap.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+struct pcap_rtc {
+	struct pcap_chip *pcap;
+	struct rtc_device *rtc;
+};
+
+static irqreturn_t pcap_rtc_irq(int irq, void *_pcap_rtc)
+{
+	struct pcap_rtc *pcap_rtc = _pcap_rtc;
+	unsigned long rtc_events;
+
+	if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ))
+		rtc_events = RTC_IRQF | RTC_UF;
+	else if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA))
+		rtc_events = RTC_IRQF | RTC_AF;
+	else
+		rtc_events = 0;
+
+	rtc_update_irq(pcap_rtc->rtc, 1, rtc_events);
+	return IRQ_HANDLED;
+}
+
+static int pcap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pcap_rtc *pcap_rtc = platform_get_drvdata(pdev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned long secs;
+	u32 tod;	/* time of day, seconds since midnight */
+	u32 days;	/* days since 1/1/1970 */
+
+	ezx_pcap_read(pcap_rtc->pcap, PCAP_REG_RTC_TODA, &tod);
+	secs = tod & PCAP_RTC_TOD_MASK;
+
+	ezx_pcap_read(pcap_rtc->pcap, PCAP_REG_RTC_DAYA, &days);
+	secs += (days & PCAP_RTC_DAY_MASK) * SEC_PER_DAY;
+
+	rtc_time_to_tm(secs, tm);
+
+	return 0;
+}
+
+static int pcap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pcap_rtc *pcap_rtc = platform_get_drvdata(pdev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned long secs;
+	u32 tod, days;
+
+	rtc_tm_to_time(tm, &secs);
+
+	tod = secs % SEC_PER_DAY;
+	ezx_pcap_write(pcap_rtc->pcap, PCAP_REG_RTC_TODA, tod);
+
+	days = secs / SEC_PER_DAY;
+	ezx_pcap_write(pcap_rtc->pcap, PCAP_REG_RTC_DAYA, days);
+
+	return 0;
+}
+
+static int pcap_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pcap_rtc *pcap_rtc = platform_get_drvdata(pdev);
+	unsigned long secs;
+	u32 tod, days;
+
+	ezx_pcap_read(pcap_rtc->pcap, PCAP_REG_RTC_TOD, &tod);
+	secs = tod & PCAP_RTC_TOD_MASK;
+
+	ezx_pcap_read(pcap_rtc->pcap, PCAP_REG_RTC_DAY, &days);
+	secs += (days & PCAP_RTC_DAY_MASK) * SEC_PER_DAY;
+
+	rtc_time_to_tm(secs, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcap_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pcap_rtc *pcap_rtc = platform_get_drvdata(pdev);
+	u32 tod, days;
+
+	tod = secs % SEC_PER_DAY;
+	ezx_pcap_write(pcap_rtc->pcap, PCAP_REG_RTC_TOD, tod);
+
+	days = secs / SEC_PER_DAY;
+	ezx_pcap_write(pcap_rtc->pcap, PCAP_REG_RTC_DAY, days);
+
+	return 0;
+}
+
+static int pcap_rtc_irq_enable(struct device *dev, int pirq, unsigned int en)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pcap_rtc *pcap_rtc = platform_get_drvdata(pdev);
+
+	if (en)
+		enable_irq(pcap_to_irq(pcap_rtc->pcap, pirq));
+	else
+		disable_irq(pcap_to_irq(pcap_rtc->pcap, pirq));
+
+	return 0;
+}
+
+static int pcap_rtc_alarm_irq_enable(struct device *dev, unsigned int en)
+{
+	return pcap_rtc_irq_enable(dev, PCAP_IRQ_TODA, en);
+}
+
+static const struct rtc_class_ops pcap_rtc_ops = {
+	.read_time = pcap_rtc_read_time,
+	.read_alarm = pcap_rtc_read_alarm,
+	.set_alarm = pcap_rtc_set_alarm,
+	.set_mmss = pcap_rtc_set_mmss,
+	.alarm_irq_enable = pcap_rtc_alarm_irq_enable,
+};
+
+static int __init pcap_rtc_probe(struct platform_device *pdev)
+{
+	struct pcap_rtc *pcap_rtc;
+	int timer_irq, alarm_irq;
+	int err = -ENOMEM;
+
+	pcap_rtc = devm_kzalloc(&pdev->dev, sizeof(struct pcap_rtc),
+				GFP_KERNEL);
+	if (!pcap_rtc)
+		return err;
+
+	pcap_rtc->pcap = dev_get_drvdata(pdev->dev.parent);
+
+	platform_set_drvdata(pdev, pcap_rtc);
+
+	pcap_rtc->rtc = devm_rtc_device_register(&pdev->dev, "pcap",
+					&pcap_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pcap_rtc->rtc))
+		return PTR_ERR(pcap_rtc->rtc);
+
+	timer_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ);
+	alarm_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA);
+
+	err = devm_request_irq(&pdev->dev, timer_irq, pcap_rtc_irq, 0,
+				"RTC Timer", pcap_rtc);
+	if (err)
+		return err;
+
+	err = devm_request_irq(&pdev->dev, alarm_irq, pcap_rtc_irq, 0,
+				"RTC Alarm", pcap_rtc);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int __exit pcap_rtc_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver pcap_rtc_driver = {
+	.remove = __exit_p(pcap_rtc_remove),
+	.driver = {
+		.name  = "pcap-rtc",
+	},
+};
+
+module_platform_driver_probe(pcap_rtc_driver, pcap_rtc_probe);
+
+MODULE_DESCRIPTION("Motorola pcap rtc driver");
+MODULE_AUTHOR("guiming zhuo <gmzhuo@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2123.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2123.c
new file mode 100644
index 0000000..8895f77
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2123.c
@@ -0,0 +1,474 @@
+/*
+ * An SPI driver for the Philips PCF2123 RTC
+ * Copyright 2009 Cyber Switching, Inc.
+ *
+ * Author: Chris Verges <chrisv@cyberswitching.com>
+ * Maintainers: http://www.cyberswitching.com
+ *
+ * based on the RS5C348 driver in this same directory.
+ *
+ * Thanks to Christian Pellegrin <chripell@fsfe.org> for
+ * the sysfs contributions to this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please note that the CS is active high, so platform data
+ * should look something like:
+ *
+ * static struct spi_board_info ek_spi_devices[] = {
+ *	...
+ *	{
+ *		.modalias		= "rtc-pcf2123",
+ *		.chip_select		= 1,
+ *		.controller_data	= (void *)AT91_PIN_PA10,
+ *		.max_speed_hz		= 1000 * 1000,
+ *		.mode			= SPI_CS_HIGH,
+ *		.bus_num		= 0,
+ *	},
+ *	...
+ *};
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/sysfs.h>
+
+/* REGISTERS */
+#define PCF2123_REG_CTRL1	(0x00)	/* Control Register 1 */
+#define PCF2123_REG_CTRL2	(0x01)	/* Control Register 2 */
+#define PCF2123_REG_SC		(0x02)	/* datetime */
+#define PCF2123_REG_MN		(0x03)
+#define PCF2123_REG_HR		(0x04)
+#define PCF2123_REG_DM		(0x05)
+#define PCF2123_REG_DW		(0x06)
+#define PCF2123_REG_MO		(0x07)
+#define PCF2123_REG_YR		(0x08)
+#define PCF2123_REG_ALRM_MN	(0x09)	/* Alarm Registers */
+#define PCF2123_REG_ALRM_HR	(0x0a)
+#define PCF2123_REG_ALRM_DM	(0x0b)
+#define PCF2123_REG_ALRM_DW	(0x0c)
+#define PCF2123_REG_OFFSET	(0x0d)	/* Clock Rate Offset Register */
+#define PCF2123_REG_TMR_CLKOUT	(0x0e)	/* Timer Registers */
+#define PCF2123_REG_CTDWN_TMR	(0x0f)
+
+/* PCF2123_REG_CTRL1 BITS */
+#define CTRL1_CLEAR		(0)	/* Clear */
+#define CTRL1_CORR_INT		BIT(1)	/* Correction irq enable */
+#define CTRL1_12_HOUR		BIT(2)	/* 12 hour time */
+#define CTRL1_SW_RESET	(BIT(3) | BIT(4) | BIT(6))	/* Software reset */
+#define CTRL1_STOP		BIT(5)	/* Stop the clock */
+#define CTRL1_EXT_TEST		BIT(7)	/* External clock test mode */
+
+/* PCF2123_REG_CTRL2 BITS */
+#define CTRL2_TIE		BIT(0)	/* Countdown timer irq enable */
+#define CTRL2_AIE		BIT(1)	/* Alarm irq enable */
+#define CTRL2_TF		BIT(2)	/* Countdown timer flag */
+#define CTRL2_AF		BIT(3)	/* Alarm flag */
+#define CTRL2_TI_TP		BIT(4)	/* Irq pin generates pulse */
+#define CTRL2_MSF		BIT(5)	/* Minute or second irq flag */
+#define CTRL2_SI		BIT(6)	/* Second irq enable */
+#define CTRL2_MI		BIT(7)	/* Minute irq enable */
+
+/* PCF2123_REG_SC BITS */
+#define OSC_HAS_STOPPED		BIT(7)	/* Clock has been stopped */
+
+/* PCF2123_REG_ALRM_XX BITS */
+#define ALRM_ENABLE		BIT(7)	/* MN, HR, DM, or DW alarm enable */
+
+/* PCF2123_REG_TMR_CLKOUT BITS */
+#define CD_TMR_4096KHZ		(0)	/* 4096 KHz countdown timer */
+#define CD_TMR_64HZ		(1)	/* 64 Hz countdown timer */
+#define CD_TMR_1HZ		(2)	/* 1 Hz countdown timer */
+#define CD_TMR_60th_HZ		(3)	/* 60th Hz countdown timer */
+#define CD_TMR_TE		BIT(3)	/* Countdown timer enable */
+
+/* PCF2123_REG_OFFSET BITS */
+#define OFFSET_SIGN_BIT		6	/* 2's complement sign bit */
+#define OFFSET_COARSE		BIT(7)	/* Coarse mode offset */
+#define OFFSET_STEP		(2170)	/* Offset step in parts per billion */
+
+/* READ/WRITE ADDRESS BITS */
+#define PCF2123_WRITE		BIT(4)
+#define PCF2123_READ		(BIT(4) | BIT(7))
+
+
+static struct spi_driver pcf2123_driver;
+
+struct pcf2123_sysfs_reg {
+	struct device_attribute attr;
+	char name[2];
+};
+
+struct pcf2123_plat_data {
+	struct rtc_device *rtc;
+	struct pcf2123_sysfs_reg regs[16];
+};
+
+/*
+ * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
+ * is released properly after an SPI write.  This function should be
+ * called after EVERY read/write call over SPI.
+ */
+static inline void pcf2123_delay_trec(void)
+{
+	ndelay(30);
+}
+
+static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+
+	reg |= PCF2123_READ;
+	ret = spi_write_then_read(spi, &reg, 1, rxbuf, size);
+	pcf2123_delay_trec();
+
+	return ret;
+}
+
+static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+
+	txbuf[0] |= PCF2123_WRITE;
+	ret = spi_write(spi, txbuf, size);
+	pcf2123_delay_trec();
+
+	return ret;
+}
+
+static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
+{
+	u8 txbuf[2];
+
+	txbuf[0] = reg;
+	txbuf[1] = val;
+	return pcf2123_write(dev, txbuf, sizeof(txbuf));
+}
+
+static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
+			    char *buffer)
+{
+	struct pcf2123_sysfs_reg *r;
+	u8 rxbuf[1];
+	unsigned long reg;
+	int ret;
+
+	r = container_of(attr, struct pcf2123_sysfs_reg, attr);
+
+	ret = kstrtoul(r->name, 16, &reg);
+	if (ret)
+		return ret;
+
+	ret = pcf2123_read(dev, reg, rxbuf, 1);
+	if (ret < 0)
+		return -EIO;
+
+	return sprintf(buffer, "0x%x\n", rxbuf[0]);
+}
+
+static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
+			     const char *buffer, size_t count)
+{
+	struct pcf2123_sysfs_reg *r;
+	unsigned long reg;
+	unsigned long val;
+
+	int ret;
+
+	r = container_of(attr, struct pcf2123_sysfs_reg, attr);
+
+	ret = kstrtoul(r->name, 16, &reg);
+	if (ret)
+		return ret;
+
+	ret = kstrtoul(buffer, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = pcf2123_write_reg(dev, reg, val);
+	if (ret < 0)
+		return -EIO;
+	return count;
+}
+
+static int pcf2123_read_offset(struct device *dev, long *offset)
+{
+	int ret;
+	s8 reg;
+
+	ret = pcf2123_read(dev, PCF2123_REG_OFFSET, &reg, 1);
+	if (ret < 0)
+		return ret;
+
+	if (reg & OFFSET_COARSE)
+		reg <<= 1; /* multiply by 2 and sign extend */
+	else
+		reg = sign_extend32(reg, OFFSET_SIGN_BIT);
+
+	*offset = ((long)reg) * OFFSET_STEP;
+
+	return 0;
+}
+
+/*
+ * The offset register is a 7 bit signed value with a coarse bit in bit 7.
+ * The main difference between the two is normal offset adjusts the first
+ * second of n minutes every other hour, with 61, 62 and 63 being shoved
+ * into the 60th minute.
+ * The coarse adjustment does the same, but every hour.
+ * the two overlap, with every even normal offset value corresponding
+ * to a coarse offset. Based on this algorithm, it seems that despite the
+ * name, coarse offset is a better fit for overlapping values.
+ */
+static int pcf2123_set_offset(struct device *dev, long offset)
+{
+	s8 reg;
+
+	if (offset > OFFSET_STEP * 127)
+		reg = 127;
+	else if (offset < OFFSET_STEP * -128)
+		reg = -128;
+	else
+		reg = (s8)((offset + (OFFSET_STEP >> 1)) / OFFSET_STEP);
+
+	/* choose fine offset only for odd values in the normal range */
+	if (reg & 1 && reg <= 63 && reg >= -64) {
+		/* Normal offset. Clear the coarse bit */
+		reg &= ~OFFSET_COARSE;
+	} else {
+		/* Coarse offset. Divide by 2 and set the coarse bit */
+		reg >>= 1;
+		reg |= OFFSET_COARSE;
+	}
+
+	return pcf2123_write_reg(dev, PCF2123_REG_OFFSET, reg);
+}
+
+static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 rxbuf[7];
+	int ret;
+
+	ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf));
+	if (ret < 0)
+		return ret;
+
+	if (rxbuf[0] & OSC_HAS_STOPPED) {
+		dev_info(dev, "clock was stopped. Time is not valid\n");
+		return -EINVAL;
+	}
+
+	tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
+	tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
+	tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
+	tm->tm_wday = rxbuf[4] & 0x07;
+	tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(rxbuf[6]);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+			"mday=%d, mon=%d, year=%d, wday=%d\n",
+			__func__,
+			tm->tm_sec, tm->tm_min, tm->tm_hour,
+			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 txbuf[8];
+	int ret;
+
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+			"mday=%d, mon=%d, year=%d, wday=%d\n",
+			__func__,
+			tm->tm_sec, tm->tm_min, tm->tm_hour,
+			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* Stop the counter first */
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
+	if (ret < 0)
+		return ret;
+
+	/* Set the new time */
+	txbuf[0] = PCF2123_REG_SC;
+	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
+	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
+	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
+	txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
+	txbuf[5] = tm->tm_wday & 0x07;
+	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
+	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
+
+	ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
+	if (ret < 0)
+		return ret;
+
+	/* Start the counter */
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int pcf2123_reset(struct device *dev)
+{
+	int ret;
+	u8  rxbuf[2];
+
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
+	if (ret < 0)
+		return ret;
+
+	/* Stop the counter */
+	dev_dbg(dev, "stopping RTC\n");
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
+	if (ret < 0)
+		return ret;
+
+	/* See if the counter was actually stopped */
+	dev_dbg(dev, "checking for presence of RTC\n");
+	ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
+		rxbuf[0], rxbuf[1]);
+	if (!(rxbuf[0] & CTRL1_STOP))
+		return -ENODEV;
+
+	/* Start the counter */
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct rtc_class_ops pcf2123_rtc_ops = {
+	.read_time	= pcf2123_rtc_read_time,
+	.set_time	= pcf2123_rtc_set_time,
+	.read_offset	= pcf2123_read_offset,
+	.set_offset	= pcf2123_set_offset,
+
+};
+
+static int pcf2123_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	struct rtc_time tm;
+	struct pcf2123_plat_data *pdata;
+	int ret, i;
+
+	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
+				GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	spi->dev.platform_data = pdata;
+
+	ret = pcf2123_rtc_read_time(&spi->dev, &tm);
+	if (ret < 0) {
+		ret = pcf2123_reset(&spi->dev);
+		if (ret < 0) {
+			dev_err(&spi->dev, "chip not found\n");
+			goto kfree_exit;
+		}
+	}
+
+	dev_info(&spi->dev, "spiclk %u KHz.\n",
+			(spi->max_speed_hz + 500) / 1000);
+
+	/* Finalize the initialization */
+	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
+			&pcf2123_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc)) {
+		dev_err(&spi->dev, "failed to register.\n");
+		ret = PTR_ERR(rtc);
+		goto kfree_exit;
+	}
+
+	pdata->rtc = rtc;
+
+	for (i = 0; i < 16; i++) {
+		sysfs_attr_init(&pdata->regs[i].attr.attr);
+		sprintf(pdata->regs[i].name, "%1x", i);
+		pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
+		pdata->regs[i].attr.attr.name = pdata->regs[i].name;
+		pdata->regs[i].attr.show = pcf2123_show;
+		pdata->regs[i].attr.store = pcf2123_store;
+		ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
+		if (ret) {
+			dev_err(&spi->dev, "Unable to create sysfs %s\n",
+				pdata->regs[i].name);
+			goto sysfs_exit;
+		}
+	}
+
+	return 0;
+
+sysfs_exit:
+	for (i--; i >= 0; i--)
+		device_remove_file(&spi->dev, &pdata->regs[i].attr);
+
+kfree_exit:
+	spi->dev.platform_data = NULL;
+	return ret;
+}
+
+static int pcf2123_remove(struct spi_device *spi)
+{
+	struct pcf2123_plat_data *pdata = dev_get_platdata(&spi->dev);
+	int i;
+
+	if (pdata) {
+		for (i = 0; i < 16; i++)
+			if (pdata->regs[i].name[0])
+				device_remove_file(&spi->dev,
+						   &pdata->regs[i].attr);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf2123_dt_ids[] = {
+	{ .compatible = "nxp,rtc-pcf2123", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
+#endif
+
+static struct spi_driver pcf2123_driver = {
+	.driver	= {
+			.name	= "rtc-pcf2123",
+			.of_match_table = of_match_ptr(pcf2123_dt_ids),
+	},
+	.probe	= pcf2123_probe,
+	.remove	= pcf2123_remove,
+};
+
+module_spi_driver(pcf2123_driver);
+
+MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
+MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2127.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2127.c
new file mode 100644
index 0000000..367e0f8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf2127.c
@@ -0,0 +1,441 @@
+/*
+ * An I2C and SPI driver for the NXP PCF2127/29 RTC
+ * Copyright 2013 Til-Technologies
+ *
+ * Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
+ *
+ * based on the other drivers in this same directory.
+ *
+ * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define PCF2127_REG_CTRL1       (0x00)  /* Control Register 1 */
+#define PCF2127_REG_CTRL2       (0x01)  /* Control Register 2 */
+
+#define PCF2127_REG_CTRL3       (0x02)  /* Control Register 3 */
+#define PCF2127_REG_CTRL3_BLF		BIT(2)
+
+#define PCF2127_REG_SC          (0x03)  /* datetime */
+#define PCF2127_REG_MN          (0x04)
+#define PCF2127_REG_HR          (0x05)
+#define PCF2127_REG_DM          (0x06)
+#define PCF2127_REG_DW          (0x07)
+#define PCF2127_REG_MO          (0x08)
+#define PCF2127_REG_YR          (0x09)
+
+#define PCF2127_OSF             BIT(7)  /* Oscillator Fail flag */
+
+struct pcf2127 {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+};
+
+/*
+ * In the routines that deal directly with the pcf2127 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+	unsigned char buf[10];
+	int ret;
+
+	/*
+	 * Avoid reading CTRL2 register as it causes WD_VAL register
+	 * value to reset to 0 which means watchdog is stopped.
+	 */
+	ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
+			       (buf + PCF2127_REG_CTRL3),
+			       ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
+	if (ret) {
+		dev_err(dev, "%s: read error\n", __func__);
+		return ret;
+	}
+
+	if (buf[PCF2127_REG_CTRL3] & PCF2127_REG_CTRL3_BLF)
+		dev_info(dev,
+			"low voltage detected, check/replace RTC battery.\n");
+
+	if (buf[PCF2127_REG_SC] & PCF2127_OSF) {
+		/*
+		 * no need clear the flag here,
+		 * it will be cleared once the new date is saved
+		 */
+		dev_warn(dev,
+			 "oscillator stop detected, date/time is not reliable\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev,
+		"%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
+		__func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
+		buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
+		buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
+		buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
+
+	tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
+	tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
+	tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+	unsigned char buf[7];
+	int i = 0, err;
+
+	dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* hours, minutes and seconds */
+	buf[i++] = bin2bcd(tm->tm_sec);	/* this will also clear OSF flag */
+	buf[i++] = bin2bcd(tm->tm_min);
+	buf[i++] = bin2bcd(tm->tm_hour);
+	buf[i++] = bin2bcd(tm->tm_mday);
+	buf[i++] = tm->tm_wday & 0x07;
+
+	/* month, 1 - 12 */
+	buf[i++] = bin2bcd(tm->tm_mon + 1);
+
+	/* year */
+	buf[i++] = bin2bcd(tm->tm_year % 100);
+
+	/* write register's data */
+	err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
+	if (err) {
+		dev_err(dev,
+			"%s: err=%d", __func__, err);
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int pcf2127_rtc_ioctl(struct device *dev,
+				unsigned int cmd, unsigned long arg)
+{
+	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+	int touser;
+	int ret;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &touser);
+		if (ret)
+			return ret;
+
+		touser = touser & PCF2127_REG_CTRL3_BLF ? 1 : 0;
+
+		if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
+			return -EFAULT;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+#else
+#define pcf2127_rtc_ioctl NULL
+#endif
+
+static const struct rtc_class_ops pcf2127_rtc_ops = {
+	.ioctl		= pcf2127_rtc_ioctl,
+	.read_time	= pcf2127_rtc_read_time,
+	.set_time	= pcf2127_rtc_set_time,
+};
+
+static int pcf2127_probe(struct device *dev, struct regmap *regmap,
+			const char *name)
+{
+	struct pcf2127 *pcf2127;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL);
+	if (!pcf2127)
+		return -ENOMEM;
+
+	pcf2127->regmap = regmap;
+
+	dev_set_drvdata(dev, pcf2127);
+
+	pcf2127->rtc = devm_rtc_device_register(dev, name, &pcf2127_rtc_ops,
+						THIS_MODULE);
+
+	return PTR_ERR_OR_ZERO(pcf2127->rtc);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf2127_of_match[] = {
+	{ .compatible = "nxp,pcf2127" },
+	{ .compatible = "nxp,pcf2129" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pcf2127_of_match);
+#endif
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int pcf2127_i2c_write(void *context, const void *data, size_t count)
+{
+	struct device *dev = context;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_master_send(client, data, count);
+	if (ret != count)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int pcf2127_i2c_gather_write(void *context,
+				const void *reg, size_t reg_size,
+				const void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+	void *buf;
+
+	if (WARN_ON(reg_size != 1))
+		return -EINVAL;
+
+	buf = kmalloc(val_size + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, reg, 1);
+	memcpy(buf + 1, val, val_size);
+
+	ret = i2c_master_send(client, buf, val_size + 1);
+
+	kfree(buf);
+
+	if (ret != val_size + 1)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size,
+				void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	if (WARN_ON(reg_size != 1))
+		return -EINVAL;
+
+	ret = i2c_master_send(client, reg, 1);
+	if (ret != 1)
+		return ret < 0 ? ret : -EIO;
+
+	ret = i2c_master_recv(client, val, val_size);
+	if (ret != val_size)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+/*
+ * The reason we need this custom regmap_bus instead of using regmap_init_i2c()
+ * is that the STOP condition is required between set register address and
+ * read register data when reading from registers.
+ */
+static const struct regmap_bus pcf2127_i2c_regmap = {
+	.write = pcf2127_i2c_write,
+	.gather_write = pcf2127_i2c_gather_write,
+	.read = pcf2127_i2c_read,
+};
+
+static struct i2c_driver pcf2127_i2c_driver;
+
+static int pcf2127_i2c_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
+					&client->dev, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return pcf2127_probe(&client->dev, regmap,
+				pcf2127_i2c_driver.driver.name);
+}
+
+static const struct i2c_device_id pcf2127_i2c_id[] = {
+	{ "pcf2127", 0 },
+	{ "pcf2129", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
+
+static struct i2c_driver pcf2127_i2c_driver = {
+	.driver		= {
+		.name	= "rtc-pcf2127-i2c",
+		.of_match_table = of_match_ptr(pcf2127_of_match),
+	},
+	.probe		= pcf2127_i2c_probe,
+	.id_table	= pcf2127_i2c_id,
+};
+
+static int pcf2127_i2c_register_driver(void)
+{
+	return i2c_add_driver(&pcf2127_i2c_driver);
+}
+
+static void pcf2127_i2c_unregister_driver(void)
+{
+	i2c_del_driver(&pcf2127_i2c_driver);
+}
+
+#else
+
+static int pcf2127_i2c_register_driver(void)
+{
+	return 0;
+}
+
+static void pcf2127_i2c_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static struct spi_driver pcf2127_spi_driver;
+
+static int pcf2127_spi_probe(struct spi_device *spi)
+{
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.read_flag_mask = 0xa0,
+		.write_flag_mask = 0x20,
+	};
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return pcf2127_probe(&spi->dev, regmap, pcf2127_spi_driver.driver.name);
+}
+
+static const struct spi_device_id pcf2127_spi_id[] = {
+	{ "pcf2127", 0 },
+	{ "pcf2129", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
+
+static struct spi_driver pcf2127_spi_driver = {
+	.driver		= {
+		.name	= "rtc-pcf2127-spi",
+		.of_match_table = of_match_ptr(pcf2127_of_match),
+	},
+	.probe		= pcf2127_spi_probe,
+	.id_table	= pcf2127_spi_id,
+};
+
+static int pcf2127_spi_register_driver(void)
+{
+	return spi_register_driver(&pcf2127_spi_driver);
+}
+
+static void pcf2127_spi_unregister_driver(void)
+{
+	spi_unregister_driver(&pcf2127_spi_driver);
+}
+
+#else
+
+static int pcf2127_spi_register_driver(void)
+{
+	return 0;
+}
+
+static void pcf2127_spi_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init pcf2127_init(void)
+{
+	int ret;
+
+	ret = pcf2127_i2c_register_driver();
+	if (ret) {
+		pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = pcf2127_spi_register_driver();
+	if (ret) {
+		pr_err("Failed to register pcf2127 spi driver: %d\n", ret);
+		pcf2127_i2c_unregister_driver();
+	}
+
+	return ret;
+}
+module_init(pcf2127_init)
+
+static void __exit pcf2127_exit(void)
+{
+	pcf2127_spi_unregister_driver();
+	pcf2127_i2c_unregister_driver();
+}
+module_exit(pcf2127_exit)
+
+MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
+MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf50633.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf50633.c
new file mode 100644
index 0000000..00c31c9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf50633.c
@@ -0,0 +1,295 @@
+/* NXP PCF50633 RTC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/err.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_REG_RTCSC	0x59 /* Second */
+#define PCF50633_REG_RTCMN	0x5a /* Minute */
+#define PCF50633_REG_RTCHR	0x5b /* Hour */
+#define PCF50633_REG_RTCWD	0x5c /* Weekday */
+#define PCF50633_REG_RTCDT	0x5d /* Day */
+#define PCF50633_REG_RTCMT	0x5e /* Month */
+#define PCF50633_REG_RTCYR	0x5f /* Year */
+#define PCF50633_REG_RTCSCA	0x60 /* Alarm Second */
+#define PCF50633_REG_RTCMNA	0x61 /* Alarm Minute */
+#define PCF50633_REG_RTCHRA	0x62 /* Alarm Hour */
+#define PCF50633_REG_RTCWDA	0x63 /* Alarm Weekday */
+#define PCF50633_REG_RTCDTA	0x64 /* Alarm Day */
+#define PCF50633_REG_RTCMTA	0x65 /* Alarm Month */
+#define PCF50633_REG_RTCYRA	0x66 /* Alarm Year */
+
+enum pcf50633_time_indexes {
+	PCF50633_TI_SEC,
+	PCF50633_TI_MIN,
+	PCF50633_TI_HOUR,
+	PCF50633_TI_WKDAY,
+	PCF50633_TI_DAY,
+	PCF50633_TI_MONTH,
+	PCF50633_TI_YEAR,
+	PCF50633_TI_EXTENT /* always last */
+};
+
+struct pcf50633_time {
+	u_int8_t time[PCF50633_TI_EXTENT];
+};
+
+struct pcf50633_rtc {
+	int alarm_enabled;
+	int alarm_pending;
+
+	struct pcf50633 *pcf;
+	struct rtc_device *rtc_dev;
+};
+
+static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf)
+{
+	rtc->tm_sec = bcd2bin(pcf->time[PCF50633_TI_SEC]);
+	rtc->tm_min = bcd2bin(pcf->time[PCF50633_TI_MIN]);
+	rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
+	rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
+	rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
+	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
+	rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
+}
+
+static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc)
+{
+	pcf->time[PCF50633_TI_SEC] = bin2bcd(rtc->tm_sec);
+	pcf->time[PCF50633_TI_MIN] = bin2bcd(rtc->tm_min);
+	pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
+	pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
+	pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
+	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
+	pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
+}
+
+static int
+pcf50633_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pcf50633_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+
+	if (enabled)
+		err = pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+	else
+		err = pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	if (err < 0)
+		return err;
+
+	rtc->alarm_enabled = enabled;
+
+	return 0;
+}
+
+static int pcf50633_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int ret;
+
+	rtc = dev_get_drvdata(dev);
+
+	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSC,
+					    PCF50633_TI_EXTENT,
+					    &pcf_tm.time[0]);
+	if (ret != PCF50633_TI_EXTENT) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
+		pcf_tm.time[PCF50633_TI_DAY],
+		pcf_tm.time[PCF50633_TI_MONTH],
+		pcf_tm.time[PCF50633_TI_YEAR],
+		pcf_tm.time[PCF50633_TI_HOUR],
+		pcf_tm.time[PCF50633_TI_MIN],
+		pcf_tm.time[PCF50633_TI_SEC]);
+
+	pcf2rtc_time(tm, &pcf_tm);
+
+	dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
+		tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf50633_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int alarm_masked, ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
+		tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	rtc2pcf_time(&pcf_tm, tm);
+
+	dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
+		pcf_tm.time[PCF50633_TI_DAY],
+		pcf_tm.time[PCF50633_TI_MONTH],
+		pcf_tm.time[PCF50633_TI_YEAR],
+		pcf_tm.time[PCF50633_TI_HOUR],
+		pcf_tm.time[PCF50633_TI_MIN],
+		pcf_tm.time[PCF50633_TI_SEC]);
+
+
+	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	if (!alarm_masked)
+		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* Returns 0 on success */
+	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSC,
+					     PCF50633_TI_EXTENT,
+					     &pcf_tm.time[0]);
+
+	if (!alarm_masked)
+		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	return ret;
+}
+
+static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	alrm->enabled = rtc->alarm_enabled;
+	alrm->pending = rtc->alarm_pending;
+
+	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
+				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+	if (ret != PCF50633_TI_EXTENT) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	pcf2rtc_time(&alrm->time, &pcf_tm);
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int alarm_masked, ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	rtc2pcf_time(&pcf_tm, &alrm->time);
+
+	/* do like mktime does and ignore tm_wday */
+	pcf_tm.time[PCF50633_TI_WKDAY] = 7;
+
+	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* disable alarm interrupt */
+	if (!alarm_masked)
+		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* Returns 0 on success */
+	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+	if (!alrm->enabled)
+		rtc->alarm_pending = 0;
+
+	if (!alarm_masked || alrm->enabled)
+		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+	rtc->alarm_enabled = alrm->enabled;
+
+	return ret;
+}
+
+static const struct rtc_class_ops pcf50633_rtc_ops = {
+	.read_time		= pcf50633_rtc_read_time,
+	.set_time		= pcf50633_rtc_set_time,
+	.read_alarm		= pcf50633_rtc_read_alarm,
+	.set_alarm		= pcf50633_rtc_set_alarm,
+	.alarm_irq_enable	= pcf50633_rtc_alarm_irq_enable,
+};
+
+static void pcf50633_rtc_irq(int irq, void *data)
+{
+	struct pcf50633_rtc *rtc = data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+	rtc->alarm_pending = 1;
+}
+
+static int pcf50633_rtc_probe(struct platform_device *pdev)
+{
+	struct pcf50633_rtc *rtc;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->pcf = dev_to_pcf50633(pdev->dev.parent);
+	platform_set_drvdata(pdev, rtc);
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, "pcf50633-rtc",
+				&pcf50633_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM,
+					pcf50633_rtc_irq, rtc);
+	return 0;
+}
+
+static int pcf50633_rtc_remove(struct platform_device *pdev)
+{
+	struct pcf50633_rtc *rtc;
+
+	rtc = platform_get_drvdata(pdev);
+	pcf50633_free_irq(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_rtc_driver = {
+	.driver = {
+		.name = "pcf50633-rtc",
+	},
+	.probe = pcf50633_rtc_probe,
+	.remove = pcf50633_rtc_remove,
+};
+
+module_platform_driver(pcf50633_rtc_driver);
+
+MODULE_DESCRIPTION("PCF50633 RTC driver");
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf85063.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf85063.c
new file mode 100644
index 0000000..a06dff9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf85063.c
@@ -0,0 +1,241 @@
+/*
+ * An I2C driver for the PCF85063 RTC
+ * Copyright 2014 Rose Technology
+ *
+ * Author: Søren Andersen <san@rosetechnology.dk>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * based on the other drivers in this same directory.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+
+/*
+ * Information for this driver was pulled from the following datasheets.
+ *
+ *  http://www.nxp.com/documents/data_sheet/PCF85063A.pdf
+ *  http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf
+ *
+ *  PCF85063A -- Rev. 6 — 18 November 2015
+ *  PCF85063TP -- Rev. 4 — 6 May 2015
+*/
+
+#define PCF85063_REG_CTRL1		0x00 /* status */
+#define PCF85063_REG_CTRL1_STOP		BIT(5)
+#define PCF85063_REG_CTRL2		0x01
+
+#define PCF85063_REG_SC			0x04 /* datetime */
+#define PCF85063_REG_SC_OS		0x80
+#define PCF85063_REG_MN			0x05
+#define PCF85063_REG_HR			0x06
+#define PCF85063_REG_DM			0x07
+#define PCF85063_REG_DW			0x08
+#define PCF85063_REG_MO			0x09
+#define PCF85063_REG_YR			0x0A
+
+static struct i2c_driver pcf85063_driver;
+
+static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failing to stop the clock\n");
+		return -EIO;
+	}
+
+	/* stop the clock */
+	ret |= PCF85063_REG_CTRL1_STOP;
+
+	ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failing to stop the clock\n");
+		return -EIO;
+	}
+
+	*ctrl1 = ret;
+
+	return 0;
+}
+
+static int pcf85063_start_clock(struct i2c_client *client, u8 ctrl1)
+{
+	s32 ret;
+
+	/* start the clock */
+	ctrl1 &= PCF85063_REG_CTRL1_STOP;
+
+	ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ctrl1);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failing to start the clock\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	int rc;
+	u8 regs[7];
+
+	/*
+	 * while reading, the time/date registers are blocked and not updated
+	 * anymore until the access is finished. To not lose a second
+	 * event, the access must be finished within one second. So, read all
+	 * time/date registers in one turn.
+	 */
+	rc = i2c_smbus_read_i2c_block_data(client, PCF85063_REG_SC,
+					   sizeof(regs), regs);
+	if (rc != sizeof(regs)) {
+		dev_err(&client->dev, "date/time register read error\n");
+		return -EIO;
+	}
+
+	/* if the clock has lost its power it makes no sense to use its time */
+	if (regs[0] & PCF85063_REG_SC_OS) {
+		dev_warn(&client->dev, "Power loss detected, invalid time\n");
+		return -EINVAL;
+	}
+
+	tm->tm_sec = bcd2bin(regs[0] & 0x7F);
+	tm->tm_min = bcd2bin(regs[1] & 0x7F);
+	tm->tm_hour = bcd2bin(regs[2] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_mday = bcd2bin(regs[3] & 0x3F);
+	tm->tm_wday = regs[4] & 0x07;
+	tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(regs[6]);
+	tm->tm_year += 100;
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	int rc;
+	u8 regs[7];
+	u8 ctrl1;
+
+	if ((tm->tm_year < 100) || (tm->tm_year > 199))
+		return -EINVAL;
+
+	/*
+	 * to accurately set the time, reset the divider chain and keep it in
+	 * reset state until all time/date registers are written
+	 */
+	rc = pcf85063_stop_clock(client, &ctrl1);
+	if (rc != 0)
+		return rc;
+
+	/* hours, minutes and seconds */
+	regs[0] = bin2bcd(tm->tm_sec) & 0x7F; /* clear OS flag */
+
+	regs[1] = bin2bcd(tm->tm_min);
+	regs[2] = bin2bcd(tm->tm_hour);
+
+	/* Day of month, 1 - 31 */
+	regs[3] = bin2bcd(tm->tm_mday);
+
+	/* Day, 0 - 6 */
+	regs[4] = tm->tm_wday & 0x07;
+
+	/* month, 1 - 12 */
+	regs[5] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	regs[6] = bin2bcd(tm->tm_year - 100);
+
+	/* write all registers at once */
+	rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC,
+					    sizeof(regs), regs);
+	if (rc < 0) {
+		dev_err(&client->dev, "date/time register write error\n");
+		return rc;
+	}
+
+	/*
+	 * Write the control register as a separate action since the size of
+	 * the register space is different between the PCF85063TP and
+	 * PCF85063A devices.  The rollover point can not be used.
+	 */
+	rc = pcf85063_start_clock(client, ctrl1);
+	if (rc != 0)
+		return rc;
+
+	return 0;
+}
+
+static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return pcf85063_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int pcf85063_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return pcf85063_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops pcf85063_rtc_ops = {
+	.read_time	= pcf85063_rtc_read_time,
+	.set_time	= pcf85063_rtc_set_time
+};
+
+static int pcf85063_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct rtc_device *rtc;
+	int err;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	err = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
+	if (err < 0) {
+		dev_err(&client->dev, "RTC chip is not present\n");
+		return err;
+	}
+
+	rtc = devm_rtc_device_register(&client->dev,
+				       pcf85063_driver.driver.name,
+				       &pcf85063_rtc_ops, THIS_MODULE);
+
+	return PTR_ERR_OR_ZERO(rtc);
+}
+
+static const struct i2c_device_id pcf85063_id[] = {
+	{ "pcf85063", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf85063_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf85063_of_match[] = {
+	{ .compatible = "nxp,pcf85063" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pcf85063_of_match);
+#endif
+
+static struct i2c_driver pcf85063_driver = {
+	.driver		= {
+		.name	= "rtc-pcf85063",
+		.of_match_table = of_match_ptr(pcf85063_of_match),
+	},
+	.probe		= pcf85063_probe,
+	.id_table	= pcf85063_id,
+};
+
+module_i2c_driver(pcf85063_driver);
+
+MODULE_AUTHOR("Søren Andersen <san@rosetechnology.dk>");
+MODULE_DESCRIPTION("PCF85063 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8523.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8523.c
new file mode 100644
index 0000000..a067929
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8523.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+
+#define DRIVER_NAME "rtc-pcf8523"
+
+#define REG_CONTROL1 0x00
+#define REG_CONTROL1_CAP_SEL (1 << 7)
+#define REG_CONTROL1_STOP    (1 << 5)
+
+#define REG_CONTROL3 0x02
+#define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
+#define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
+#define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
+#define REG_CONTROL3_PM_MASK 0xe0
+#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
+
+#define REG_SECONDS  0x03
+#define REG_SECONDS_OS (1 << 7)
+
+#define REG_MINUTES  0x04
+#define REG_HOURS    0x05
+#define REG_DAYS     0x06
+#define REG_WEEKDAYS 0x07
+#define REG_MONTHS   0x08
+#define REG_YEARS    0x09
+
+struct pcf8523 {
+	struct rtc_device *rtc;
+};
+
+static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep)
+{
+	struct i2c_msg msgs[2];
+	u8 value = 0;
+	int err;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(reg);
+	msgs[0].buf = &reg;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(value);
+	msgs[1].buf = &value;
+
+	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (err < 0)
+		return err;
+
+	*valuep = value;
+
+	return 0;
+}
+
+static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	u8 buffer[2] = { reg, value };
+	struct i2c_msg msg;
+	int err;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = sizeof(buffer);
+	msg.buf = buffer;
+
+	err = i2c_transfer(client->adapter, &msg, 1);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int pcf8523_voltage_low(struct i2c_client *client)
+{
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL3, &value);
+	if (err < 0)
+		return err;
+
+	return !!(value & REG_CONTROL3_BLF);
+}
+
+static int pcf8523_load_capacitance(struct i2c_client *client)
+{
+	u32 load;
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL1, &value);
+	if (err < 0)
+		return err;
+
+	load = 12500;
+	of_property_read_u32(client->dev.of_node, "quartz-load-femtofarads",
+			     &load);
+
+	switch (load) {
+	default:
+		dev_warn(&client->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 12500",
+			 load);
+		/* fall through */
+	case 12500:
+		value |= REG_CONTROL1_CAP_SEL;
+		break;
+	case 7000:
+		value &= ~REG_CONTROL1_CAP_SEL;
+		break;
+	}
+
+	err = pcf8523_write(client, REG_CONTROL1, value);
+
+	return err;
+}
+
+static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
+{
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL3, &value);
+	if (err < 0)
+		return err;
+
+	value = (value & ~REG_CONTROL3_PM_MASK) | pm;
+
+	err = pcf8523_write(client, REG_CONTROL3, value);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int pcf8523_stop_rtc(struct i2c_client *client)
+{
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL1, &value);
+	if (err < 0)
+		return err;
+
+	value |= REG_CONTROL1_STOP;
+
+	err = pcf8523_write(client, REG_CONTROL1, value);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int pcf8523_start_rtc(struct i2c_client *client)
+{
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL1, &value);
+	if (err < 0)
+		return err;
+
+	value &= ~REG_CONTROL1_STOP;
+
+	err = pcf8523_write(client, REG_CONTROL1, value);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 start = REG_SECONDS, regs[7];
+	struct i2c_msg msgs[2];
+	int err;
+
+	err = pcf8523_voltage_low(client);
+	if (err < 0) {
+		return err;
+	} else if (err > 0) {
+		dev_err(dev, "low voltage detected, time is unreliable\n");
+		return -EINVAL;
+	}
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &start;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(regs);
+	msgs[1].buf = regs;
+
+	err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (err < 0)
+		return err;
+
+	if (regs[0] & REG_SECONDS_OS)
+		return -EINVAL;
+
+	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
+	tm->tm_min = bcd2bin(regs[1] & 0x7f);
+	tm->tm_hour = bcd2bin(regs[2] & 0x3f);
+	tm->tm_mday = bcd2bin(regs[3] & 0x3f);
+	tm->tm_wday = regs[4] & 0x7;
+	tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(regs[6]) + 100;
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_msg msg;
+	u8 regs[8];
+	int err;
+
+	/*
+	 * The hardware can only store values between 0 and 99 in it's YEAR
+	 * register (with 99 overflowing to 0 on increment).
+	 * After 2100-02-28 we could start interpreting the year to be in the
+	 * interval [2100, 2199], but there is no path to switch in a smooth way
+	 * because the chip handles YEAR=0x00 (and the out-of-spec
+	 * YEAR=0xa0) as a leap year, but 2100 isn't.
+	 */
+	if (tm->tm_year < 100 || tm->tm_year >= 200)
+		return -EINVAL;
+
+	err = pcf8523_stop_rtc(client);
+	if (err < 0)
+		return err;
+
+	regs[0] = REG_SECONDS;
+	/* This will purposely overwrite REG_SECONDS_OS */
+	regs[1] = bin2bcd(tm->tm_sec);
+	regs[2] = bin2bcd(tm->tm_min);
+	regs[3] = bin2bcd(tm->tm_hour);
+	regs[4] = bin2bcd(tm->tm_mday);
+	regs[5] = tm->tm_wday;
+	regs[6] = bin2bcd(tm->tm_mon + 1);
+	regs[7] = bin2bcd(tm->tm_year - 100);
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = sizeof(regs);
+	msg.buf = regs;
+
+	err = i2c_transfer(client->adapter, &msg, 1);
+	if (err < 0) {
+		/*
+		 * If the time cannot be set, restart the RTC anyway. Note
+		 * that errors are ignored if the RTC cannot be started so
+		 * that we have a chance to propagate the original error.
+		 */
+		pcf8523_start_rtc(client);
+		return err;
+	}
+
+	return pcf8523_start_rtc(client);
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = pcf8523_voltage_low(client);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
+			return -EFAULT;
+
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+#else
+#define pcf8523_rtc_ioctl NULL
+#endif
+
+static const struct rtc_class_ops pcf8523_rtc_ops = {
+	.read_time = pcf8523_rtc_read_time,
+	.set_time = pcf8523_rtc_set_time,
+	.ioctl = pcf8523_rtc_ioctl,
+};
+
+static int pcf8523_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pcf8523 *pcf;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
+	if (!pcf)
+		return -ENOMEM;
+
+	err = pcf8523_load_capacitance(client);
+	if (err < 0)
+		dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
+			 err);
+
+	err = pcf8523_set_pm(client, 0);
+	if (err < 0)
+		return err;
+
+	pcf->rtc = devm_rtc_device_register(&client->dev, DRIVER_NAME,
+				       &pcf8523_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pcf->rtc))
+		return PTR_ERR(pcf->rtc);
+
+	i2c_set_clientdata(client, pcf);
+
+	return 0;
+}
+
+static const struct i2c_device_id pcf8523_id[] = {
+	{ "pcf8523", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8523_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf8523_of_match[] = {
+	{ .compatible = "nxp,pcf8523" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pcf8523_of_match);
+#endif
+
+static struct i2c_driver pcf8523_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(pcf8523_of_match),
+	},
+	.probe = pcf8523_probe,
+	.id_table = pcf8523_id,
+};
+module_i2c_driver(pcf8523_driver);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8563.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8563.c
new file mode 100644
index 0000000..4d0b81f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8563.c
@@ -0,0 +1,656 @@
+/*
+ * An I2C driver for the Philips PCF8563 RTC
+ * Copyright 2005-06 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * based on the other drivers in this same directory.
+ *
+ * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#define PCF8563_REG_ST1		0x00 /* status */
+#define PCF8563_REG_ST2		0x01
+#define PCF8563_BIT_AIE		(1 << 1)
+#define PCF8563_BIT_AF		(1 << 3)
+#define PCF8563_BITS_ST2_N	(7 << 5)
+
+#define PCF8563_REG_SC		0x02 /* datetime */
+#define PCF8563_REG_MN		0x03
+#define PCF8563_REG_HR		0x04
+#define PCF8563_REG_DM		0x05
+#define PCF8563_REG_DW		0x06
+#define PCF8563_REG_MO		0x07
+#define PCF8563_REG_YR		0x08
+
+#define PCF8563_REG_AMN		0x09 /* alarm */
+
+#define PCF8563_REG_CLKO		0x0D /* clock out */
+#define PCF8563_REG_CLKO_FE		0x80 /* clock out enabled */
+#define PCF8563_REG_CLKO_F_MASK		0x03 /* frequenc mask */
+#define PCF8563_REG_CLKO_F_32768HZ	0x00
+#define PCF8563_REG_CLKO_F_1024HZ	0x01
+#define PCF8563_REG_CLKO_F_32HZ		0x02
+#define PCF8563_REG_CLKO_F_1HZ		0x03
+
+#define PCF8563_REG_TMRC	0x0E /* timer control */
+#define PCF8563_TMRC_ENABLE	BIT(7)
+#define PCF8563_TMRC_4096	0
+#define PCF8563_TMRC_64		1
+#define PCF8563_TMRC_1		2
+#define PCF8563_TMRC_1_60	3
+#define PCF8563_TMRC_MASK	3
+
+#define PCF8563_REG_TMR		0x0F /* timer */
+
+#define PCF8563_SC_LV		0x80 /* low voltage */
+#define PCF8563_MO_C		0x80 /* century */
+
+static struct i2c_driver pcf8563_driver;
+
+struct pcf8563 {
+	struct rtc_device *rtc;
+	/*
+	 * The meaning of MO_C bit varies by the chip type.
+	 * From PCF8563 datasheet: this bit is toggled when the years
+	 * register overflows from 99 to 00
+	 *   0 indicates the century is 20xx
+	 *   1 indicates the century is 19xx
+	 * From RTC8564 datasheet: this bit indicates change of
+	 * century. When the year digit data overflows from 99 to 00,
+	 * this bit is set. By presetting it to 0 while still in the
+	 * 20th century, it will be set in year 2000, ...
+	 * There seems no reliable way to know how the system use this
+	 * bit.  So let's do it heuristically, assuming we are live in
+	 * 1970...2069.
+	 */
+	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
+	int voltage_low; /* incicates if a low_voltage was detected */
+
+	struct i2c_client *client;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clkout_hw;
+#endif
+};
+
+static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
+				   unsigned char length, unsigned char *buf)
+{
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = buf
+		},
+	};
+
+	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int pcf8563_write_block_data(struct i2c_client *client,
+				   unsigned char reg, unsigned char length,
+				   unsigned char *buf)
+{
+	int i, err;
+
+	for (i = 0; i < length; i++) {
+		unsigned char data[2] = { reg + i, buf[i] };
+
+		err = i2c_master_send(client, data, sizeof(data));
+		if (err != sizeof(data)) {
+			dev_err(&client->dev,
+				"%s: err=%d addr=%02x, data=%02x\n",
+				__func__, err, data[0], data[1]);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
+{
+	unsigned char buf;
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0)
+		return err;
+
+	if (on)
+		buf |= PCF8563_BIT_AIE;
+	else
+		buf &= ~PCF8563_BIT_AIE;
+
+	buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N);
+
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
+				  unsigned char *pen)
+{
+	unsigned char buf;
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err)
+		return err;
+
+	if (en)
+		*en = !!(buf & PCF8563_BIT_AIE);
+	if (pen)
+		*pen = !!(buf & PCF8563_BIT_AF);
+
+	return 0;
+}
+
+static irqreturn_t pcf8563_irq(int irq, void *dev_id)
+{
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id);
+	int err;
+	char pending;
+
+	err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending);
+	if (err)
+		return IRQ_NONE;
+
+	if (pending) {
+		rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF);
+		pcf8563_set_alarm_mode(pcf8563->client, 1);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/*
+ * In the routines that deal directly with the pcf8563 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+	unsigned char buf[9];
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf);
+	if (err)
+		return err;
+
+	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
+		pcf8563->voltage_low = 1;
+		dev_err(&client->dev,
+			"low voltage detected, date/time is not reliable.\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
+		__func__,
+		buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6], buf[7],
+		buf[8]);
+
+
+	tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F);
+	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
+	tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+	/* detect the polarity heuristically. see note above. */
+	pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ?
+		(tm->tm_year >= 100) : (tm->tm_year < 100);
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return 0;
+}
+
+static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+	unsigned char buf[9];
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* hours, minutes and seconds */
+	buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min);
+	buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour);
+
+	buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year % 100);
+	if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100))
+		buf[PCF8563_REG_MO] |= PCF8563_MO_C;
+
+	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
+
+	return pcf8563_write_block_data(client, PCF8563_REG_SC,
+				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rtc_time tm;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		if (pcf8563->voltage_low)
+			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
+
+		if (copy_to_user((void __user *)arg, &pcf8563->voltage_low,
+					sizeof(int)))
+			return -EFAULT;
+		return 0;
+	case RTC_VL_CLR:
+		/*
+		 * Clear the VL bit in the seconds register in case
+		 * the time has not been set already (which would
+		 * have cleared it). This does not really matter
+		 * because of the cached voltage_low value but do it
+		 * anyway for consistency.
+		 */
+		if (pcf8563_get_datetime(to_i2c_client(dev), &tm))
+			pcf8563_set_datetime(to_i2c_client(dev), &tm);
+
+		/* Clear the cached value. */
+		pcf8563->voltage_low = 0;
+
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+#else
+#define pcf8563_rtc_ioctl NULL
+#endif
+
+static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return pcf8563_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return pcf8563_set_datetime(to_i2c_client(dev), tm);
+}
+
+static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[4];
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf);
+	if (err)
+		return err;
+
+	dev_dbg(&client->dev,
+		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
+		__func__, buf[0], buf[1], buf[2], buf[3]);
+
+	tm->time.tm_sec = 0;
+	tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
+	tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
+	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
+	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
+
+	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
+		" enabled=%d, pending=%d\n", __func__, tm->time.tm_min,
+		tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday,
+		tm->enabled, tm->pending);
+
+	return 0;
+}
+
+static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[4];
+	int err;
+
+	/* The alarm has no seconds, round up to nearest minute */
+	if (tm->time.tm_sec) {
+		time64_t alarm_time = rtc_tm_to_time64(&tm->time);
+
+		alarm_time += 60 - tm->time.tm_sec;
+		rtc_time64_to_tm(alarm_time, &tm->time);
+	}
+
+	dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d "
+		"enabled=%d pending=%d\n", __func__,
+		tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday,
+		tm->time.tm_mday, tm->enabled, tm->pending);
+
+	buf[0] = bin2bcd(tm->time.tm_min);
+	buf[1] = bin2bcd(tm->time.tm_hour);
+	buf[2] = bin2bcd(tm->time.tm_mday);
+	buf[3] = tm->time.tm_wday & 0x07;
+
+	err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf);
+	if (err)
+		return err;
+
+	return pcf8563_set_alarm_mode(client, 1);
+}
+
+static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
+{
+	dev_dbg(dev, "%s: en=%d\n", __func__, enabled);
+	return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
+}
+
+#ifdef CONFIG_COMMON_CLK
+/*
+ * Handling of the clkout
+ */
+
+#define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw)
+
+static int clkout_rates[] = {
+	32768,
+	1024,
+	32,
+	1,
+};
+
+static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return 0;
+
+	buf &= PCF8563_REG_CLKO_F_MASK;
+	return clkout_rates[buf];
+}
+
+static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= rate)
+			return clkout_rates[i];
+
+	return 0;
+}
+
+static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	int i;
+
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate) {
+			buf &= ~PCF8563_REG_CLKO_F_MASK;
+			buf |= i;
+			ret = pcf8563_write_block_data(client,
+						       PCF8563_REG_CLKO, 1,
+						       &buf);
+			return ret;
+		}
+
+	return -EINVAL;
+}
+
+static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		buf |= PCF8563_REG_CLKO_FE;
+	else
+		buf &= ~PCF8563_REG_CLKO_FE;
+
+	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	return ret;
+}
+
+static int pcf8563_clkout_prepare(struct clk_hw *hw)
+{
+	return pcf8563_clkout_control(hw, 1);
+}
+
+static void pcf8563_clkout_unprepare(struct clk_hw *hw)
+{
+	pcf8563_clkout_control(hw, 0);
+}
+
+static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return ret;
+
+	return !!(buf & PCF8563_REG_CLKO_FE);
+}
+
+static const struct clk_ops pcf8563_clkout_ops = {
+	.prepare = pcf8563_clkout_prepare,
+	.unprepare = pcf8563_clkout_unprepare,
+	.is_prepared = pcf8563_clkout_is_prepared,
+	.recalc_rate = pcf8563_clkout_recalc_rate,
+	.round_rate = pcf8563_clkout_round_rate,
+	.set_rate = pcf8563_clkout_set_rate,
+};
+
+static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
+{
+	struct i2c_client *client = pcf8563->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk *clk;
+	struct clk_init_data init;
+	int ret;
+	unsigned char buf;
+
+	/* disable the clkout output */
+	buf = 0;
+	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	init.name = "pcf8563-clkout";
+	init.ops = &pcf8563_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	pcf8563->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+static const struct rtc_class_ops pcf8563_rtc_ops = {
+	.ioctl		= pcf8563_rtc_ioctl,
+	.read_time	= pcf8563_rtc_read_time,
+	.set_time	= pcf8563_rtc_set_time,
+	.read_alarm	= pcf8563_rtc_read_alarm,
+	.set_alarm	= pcf8563_rtc_set_alarm,
+	.alarm_irq_enable = pcf8563_irq_enable,
+};
+
+static int pcf8563_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct pcf8563 *pcf8563;
+	int err;
+	unsigned char buf;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563),
+				GFP_KERNEL);
+	if (!pcf8563)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, pcf8563);
+	pcf8563->client = client;
+	device_set_wakeup_capable(&client->dev, 1);
+
+	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
+	buf = PCF8563_TMRC_1_60;
+	err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return err;
+	}
+
+	/* Clear flags and disable interrupts */
+	buf = 0;
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return err;
+	}
+
+	pcf8563->rtc = devm_rtc_device_register(&client->dev,
+				pcf8563_driver.driver.name,
+				&pcf8563_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(pcf8563->rtc))
+		return PTR_ERR(pcf8563->rtc);
+
+	if (client->irq > 0) {
+		err = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, pcf8563_irq,
+				IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+				pcf8563_driver.driver.name, client);
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ %d\n",
+								client->irq);
+			return err;
+		}
+
+	}
+
+#ifdef CONFIG_COMMON_CLK
+	/* register clk in common clk framework */
+	pcf8563_clkout_register_clk(pcf8563);
+#endif
+
+	/* the pcf8563 alarm only supports a minute accuracy */
+	pcf8563->rtc->uie_unsupported = 1;
+
+	return 0;
+}
+
+static const struct i2c_device_id pcf8563_id[] = {
+	{ "pcf8563", 0 },
+	{ "rtc8564", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8563_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf8563_of_match[] = {
+	{ .compatible = "nxp,pcf8563" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pcf8563_of_match);
+#endif
+
+static struct i2c_driver pcf8563_driver = {
+	.driver		= {
+		.name	= "rtc-pcf8563",
+		.of_match_table = of_match_ptr(pcf8563_of_match),
+	},
+	.probe		= pcf8563_probe,
+	.id_table	= pcf8563_id,
+};
+
+module_i2c_driver(pcf8563_driver);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8583.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8583.c
new file mode 100644
index 0000000..7ca9e88
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pcf8583.c
@@ -0,0 +1,321 @@
+/*
+ *  drivers/rtc/rtc-pcf8583.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *  Copyright (C) 2008 Wolfram Sang & Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Driver for PCF8583 RTC & RAM chip
+ *
+ *  Converted to the generic RTC susbsystem by G. Liakhovetski (2006)
+ */
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/bcd.h>
+
+struct rtc_mem {
+	unsigned int	loc;
+	unsigned int	nr;
+	unsigned char	*data;
+};
+
+struct pcf8583 {
+	struct rtc_device *rtc;
+	unsigned char ctrl;
+};
+
+#define CTRL_STOP	0x80
+#define CTRL_HOLD	0x40
+#define CTRL_32KHZ	0x00
+#define CTRL_MASK	0x08
+#define CTRL_ALARMEN	0x04
+#define CTRL_ALARM	0x02
+#define CTRL_TIMER	0x01
+
+
+static struct i2c_driver pcf8583_driver;
+
+#define get_ctrl(x)    ((struct pcf8583 *)i2c_get_clientdata(x))->ctrl
+#define set_ctrl(x, v) get_ctrl(x) = v
+
+#define CMOS_YEAR	(64 + 128)
+#define CMOS_CHECKSUM	(63)
+
+static int pcf8583_get_datetime(struct i2c_client *client, struct rtc_time *dt)
+{
+	unsigned char buf[8], addr[1] = { 1 };
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = addr,
+		}, {
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 6,
+			.buf = buf,
+		}
+	};
+	int ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret == 2) {
+		dt->tm_year = buf[4] >> 6;
+		dt->tm_wday = buf[5] >> 5;
+
+		buf[4] &= 0x3f;
+		buf[5] &= 0x1f;
+
+		dt->tm_sec = bcd2bin(buf[1]);
+		dt->tm_min = bcd2bin(buf[2]);
+		dt->tm_hour = bcd2bin(buf[3]);
+		dt->tm_mday = bcd2bin(buf[4]);
+		dt->tm_mon = bcd2bin(buf[5]) - 1;
+	}
+
+	return ret == 2 ? 0 : -EIO;
+}
+
+static int pcf8583_set_datetime(struct i2c_client *client, struct rtc_time *dt, int datetoo)
+{
+	unsigned char buf[8];
+	int ret, len = 6;
+
+	buf[0] = 0;
+	buf[1] = get_ctrl(client) | 0x80;
+	buf[2] = 0;
+	buf[3] = bin2bcd(dt->tm_sec);
+	buf[4] = bin2bcd(dt->tm_min);
+	buf[5] = bin2bcd(dt->tm_hour);
+
+	if (datetoo) {
+		len = 8;
+		buf[6] = bin2bcd(dt->tm_mday) | (dt->tm_year << 6);
+		buf[7] = bin2bcd(dt->tm_mon + 1)  | (dt->tm_wday << 5);
+	}
+
+	ret = i2c_master_send(client, (char *)buf, len);
+	if (ret != len)
+		return -EIO;
+
+	buf[1] = get_ctrl(client);
+	ret = i2c_master_send(client, (char *)buf, 2);
+
+	return ret == 2 ? 0 : -EIO;
+}
+
+static int pcf8583_get_ctrl(struct i2c_client *client, unsigned char *ctrl)
+{
+	*ctrl = get_ctrl(client);
+	return 0;
+}
+
+static int pcf8583_set_ctrl(struct i2c_client *client, unsigned char *ctrl)
+{
+	unsigned char buf[2];
+
+	buf[0] = 0;
+	buf[1] = *ctrl;
+	set_ctrl(client, *ctrl);
+
+	return i2c_master_send(client, (char *)buf, 2);
+}
+
+static int pcf8583_read_mem(struct i2c_client *client, struct rtc_mem *mem)
+{
+	unsigned char addr[1];
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = addr,
+		}, {
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = mem->nr,
+			.buf = mem->data,
+		}
+	};
+
+	if (mem->loc < 8)
+		return -EINVAL;
+
+	addr[0] = mem->loc;
+
+	return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
+}
+
+static int pcf8583_write_mem(struct i2c_client *client, struct rtc_mem *mem)
+{
+	unsigned char buf[9];
+	int ret;
+
+	if (mem->loc < 8 || mem->nr > 8)
+		return -EINVAL;
+
+	buf[0] = mem->loc;
+	memcpy(buf + 1, mem->data, mem->nr);
+
+	ret = i2c_master_send(client, buf, mem->nr + 1);
+	return ret == mem->nr + 1 ? 0 : -EIO;
+}
+
+static int pcf8583_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char ctrl, year[2];
+	struct rtc_mem mem = {
+		.loc = CMOS_YEAR,
+		.nr = sizeof(year),
+		.data = year
+	};
+	int real_year, year_offset, err;
+
+	/*
+	 * Ensure that the RTC is running.
+	 */
+	pcf8583_get_ctrl(client, &ctrl);
+	if (ctrl & (CTRL_STOP | CTRL_HOLD)) {
+		unsigned char new_ctrl = ctrl & ~(CTRL_STOP | CTRL_HOLD);
+
+		dev_warn(dev, "resetting control %02x -> %02x\n",
+			ctrl, new_ctrl);
+
+		err = pcf8583_set_ctrl(client, &new_ctrl);
+		if (err < 0)
+			return err;
+	}
+
+	if (pcf8583_get_datetime(client, tm) ||
+	    pcf8583_read_mem(client, &mem))
+		return -EIO;
+
+	real_year = year[0];
+
+	/*
+	 * The RTC year holds the LSB two bits of the current
+	 * year, which should reflect the LSB two bits of the
+	 * CMOS copy of the year.  Any difference indicates
+	 * that we have to correct the CMOS version.
+	 */
+	year_offset = tm->tm_year - (real_year & 3);
+	if (year_offset < 0)
+		/*
+		 * RTC year wrapped.  Adjust it appropriately.
+		 */
+		year_offset += 4;
+
+	tm->tm_year = (real_year + year_offset + year[1] * 100) - 1900;
+
+	return 0;
+}
+
+static int pcf8583_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char year[2], chk;
+	struct rtc_mem cmos_year  = {
+		.loc = CMOS_YEAR,
+		.nr = sizeof(year),
+		.data = year
+	};
+	struct rtc_mem cmos_check = {
+		.loc = CMOS_CHECKSUM,
+		.nr = 1,
+		.data = &chk
+	};
+	unsigned int proper_year = tm->tm_year + 1900;
+	int ret;
+
+	/*
+	 * The RTC's own 2-bit year must reflect the least
+	 * significant two bits of the CMOS year.
+	 */
+
+	ret = pcf8583_set_datetime(client, tm, 1);
+	if (ret)
+		return ret;
+
+	ret = pcf8583_read_mem(client, &cmos_check);
+	if (ret)
+		return ret;
+
+	ret = pcf8583_read_mem(client, &cmos_year);
+	if (ret)
+		return ret;
+
+	chk -= year[1] + year[0];
+
+	year[1] = proper_year / 100;
+	year[0] = proper_year % 100;
+
+	chk += year[1] + year[0];
+
+	ret = pcf8583_write_mem(client, &cmos_year);
+
+	if (ret)
+		return ret;
+
+	ret = pcf8583_write_mem(client, &cmos_check);
+
+	return ret;
+}
+
+static const struct rtc_class_ops pcf8583_rtc_ops = {
+	.read_time	= pcf8583_rtc_read_time,
+	.set_time	= pcf8583_rtc_set_time,
+};
+
+static int pcf8583_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct pcf8583 *pcf8583;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	pcf8583 = devm_kzalloc(&client->dev, sizeof(struct pcf8583),
+				GFP_KERNEL);
+	if (!pcf8583)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, pcf8583);
+
+	pcf8583->rtc = devm_rtc_device_register(&client->dev,
+				pcf8583_driver.driver.name,
+				&pcf8583_rtc_ops, THIS_MODULE);
+
+	return PTR_ERR_OR_ZERO(pcf8583->rtc);
+}
+
+static const struct i2c_device_id pcf8583_id[] = {
+	{ "pcf8583", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8583_id);
+
+static struct i2c_driver pcf8583_driver = {
+	.driver = {
+		.name	= "pcf8583",
+	},
+	.probe		= pcf8583_probe,
+	.id_table	= pcf8583_id,
+};
+
+module_i2c_driver(pcf8583_driver);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("PCF8583 I2C RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pic32.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pic32.c
new file mode 100644
index 0000000..5cfb6df
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pic32.c
@@ -0,0 +1,410 @@
+/*
+ * PIC32 RTC driver
+ *
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2016 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+#define PIC32_RTCCON		0x00
+#define PIC32_RTCCON_ON		BIT(15)
+#define PIC32_RTCCON_SIDL	BIT(13)
+#define PIC32_RTCCON_RTCCLKSEL	(3 << 9)
+#define PIC32_RTCCON_RTCCLKON	BIT(6)
+#define PIC32_RTCCON_RTCWREN	BIT(3)
+#define PIC32_RTCCON_RTCSYNC	BIT(2)
+#define PIC32_RTCCON_HALFSEC	BIT(1)
+#define PIC32_RTCCON_RTCOE	BIT(0)
+
+#define PIC32_RTCALRM		0x10
+#define PIC32_RTCALRM_ALRMEN	BIT(15)
+#define PIC32_RTCALRM_CHIME	BIT(14)
+#define PIC32_RTCALRM_PIV	BIT(13)
+#define PIC32_RTCALRM_ALARMSYNC	BIT(12)
+#define PIC32_RTCALRM_AMASK	0x0F00
+#define PIC32_RTCALRM_ARPT	0xFF
+
+#define PIC32_RTCHOUR		0x23
+#define PIC32_RTCMIN		0x22
+#define PIC32_RTCSEC		0x21
+#define PIC32_RTCYEAR		0x33
+#define PIC32_RTCMON		0x32
+#define PIC32_RTCDAY		0x31
+
+#define PIC32_ALRMTIME		0x40
+#define PIC32_ALRMDATE		0x50
+
+#define PIC32_ALRMHOUR		0x43
+#define PIC32_ALRMMIN		0x42
+#define PIC32_ALRMSEC		0x41
+#define PIC32_ALRMYEAR		0x53
+#define PIC32_ALRMMON		0x52
+#define PIC32_ALRMDAY		0x51
+
+struct pic32_rtc_dev {
+	struct rtc_device	*rtc;
+	void __iomem		*reg_base;
+	struct clk		*clk;
+	spinlock_t		alarm_lock;
+	int			alarm_irq;
+	bool			alarm_clk_enabled;
+};
+
+static void pic32_rtc_alarm_clk_enable(struct pic32_rtc_dev *pdata,
+				       bool enable)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->alarm_lock, flags);
+	if (enable) {
+		if (!pdata->alarm_clk_enabled) {
+			clk_enable(pdata->clk);
+			pdata->alarm_clk_enabled = true;
+		}
+	} else {
+		if (pdata->alarm_clk_enabled) {
+			clk_disable(pdata->clk);
+			pdata->alarm_clk_enabled = false;
+		}
+	}
+	spin_unlock_irqrestore(&pdata->alarm_lock, flags);
+}
+
+static irqreturn_t pic32_rtc_alarmirq(int irq, void *id)
+{
+	struct pic32_rtc_dev *pdata = (struct pic32_rtc_dev *)id;
+
+	clk_enable(pdata->clk);
+	rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
+	clk_disable(pdata->clk);
+
+	pic32_rtc_alarm_clk_enable(pdata, false);
+
+	return IRQ_HANDLED;
+}
+
+static int pic32_rtc_setaie(struct device *dev, unsigned int enabled)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	void __iomem *base = pdata->reg_base;
+
+	clk_enable(pdata->clk);
+
+	writel(PIC32_RTCALRM_ALRMEN,
+	       base + (enabled ? PIC32_SET(PIC32_RTCALRM) :
+		       PIC32_CLR(PIC32_RTCALRM)));
+
+	clk_disable(pdata->clk);
+
+	pic32_rtc_alarm_clk_enable(pdata, enabled);
+
+	return 0;
+}
+
+static int pic32_rtc_setfreq(struct device *dev, int freq)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	void __iomem *base = pdata->reg_base;
+
+	clk_enable(pdata->clk);
+
+	writel(PIC32_RTCALRM_AMASK, base + PIC32_CLR(PIC32_RTCALRM));
+	writel(freq << 8, base + PIC32_SET(PIC32_RTCALRM));
+	writel(PIC32_RTCALRM_CHIME, base + PIC32_SET(PIC32_RTCALRM));
+
+	clk_disable(pdata->clk);
+
+	return 0;
+}
+
+static int pic32_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	void __iomem *base = pdata->reg_base;
+	unsigned int tries = 0;
+
+	clk_enable(pdata->clk);
+
+	do {
+		rtc_tm->tm_hour = readb(base + PIC32_RTCHOUR);
+		rtc_tm->tm_min = readb(base + PIC32_RTCMIN);
+		rtc_tm->tm_mon  = readb(base + PIC32_RTCMON);
+		rtc_tm->tm_mday = readb(base + PIC32_RTCDAY);
+		rtc_tm->tm_year = readb(base + PIC32_RTCYEAR);
+		rtc_tm->tm_sec  = readb(base + PIC32_RTCSEC);
+
+		/*
+		 * The only way to work out whether the system was mid-update
+		 * when we read it is to check the second counter, and if it
+		 * is zero, then we re-try the entire read.
+		 */
+		tries += 1;
+	} while (rtc_tm->tm_sec == 0 && tries < 2);
+
+	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
+	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
+	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
+	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
+	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon) - 1;
+	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
+
+	rtc_tm->tm_year += 100;
+
+	dev_dbg(dev, "read time %04d.%02d.%02d %02d:%02d:%02d\n",
+		1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+		rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+	clk_disable(pdata->clk);
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int pic32_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	void __iomem *base = pdata->reg_base;
+	int year = tm->tm_year - 100;
+
+	dev_dbg(dev, "set time %04d.%02d.%02d %02d:%02d:%02d\n",
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	if (year < 0 || year >= 100) {
+		dev_err(dev, "rtc only supports 100 years\n");
+		return -EINVAL;
+	}
+
+	clk_enable(pdata->clk);
+	writeb(bin2bcd(tm->tm_sec),  base + PIC32_RTCSEC);
+	writeb(bin2bcd(tm->tm_min),  base + PIC32_RTCMIN);
+	writeb(bin2bcd(tm->tm_hour), base + PIC32_RTCHOUR);
+	writeb(bin2bcd(tm->tm_mday), base + PIC32_RTCDAY);
+	writeb(bin2bcd(tm->tm_mon + 1), base + PIC32_RTCMON);
+	writeb(bin2bcd(year), base + PIC32_RTCYEAR);
+	clk_disable(pdata->clk);
+
+	return 0;
+}
+
+static int pic32_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	struct rtc_time *alm_tm = &alrm->time;
+	void __iomem *base = pdata->reg_base;
+	unsigned int alm_en;
+
+	clk_enable(pdata->clk);
+	alm_tm->tm_sec  = readb(base + PIC32_ALRMSEC);
+	alm_tm->tm_min  = readb(base + PIC32_ALRMMIN);
+	alm_tm->tm_hour = readb(base + PIC32_ALRMHOUR);
+	alm_tm->tm_mon  = readb(base + PIC32_ALRMMON);
+	alm_tm->tm_mday = readb(base + PIC32_ALRMDAY);
+	alm_tm->tm_year = readb(base + PIC32_ALRMYEAR);
+
+	alm_en = readb(base + PIC32_RTCALRM);
+
+	alrm->enabled = (alm_en & PIC32_RTCALRM_ALRMEN) ? 1 : 0;
+
+	dev_dbg(dev, "getalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+		alm_en,
+		1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+		alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+	alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
+	alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
+	alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
+	alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday);
+	alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon) - 1;
+	alm_tm->tm_year = bcd2bin(alm_tm->tm_year);
+
+	clk_disable(pdata->clk);
+	return 0;
+}
+
+static int pic32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	void __iomem *base = pdata->reg_base;
+
+	clk_enable(pdata->clk);
+	dev_dbg(dev, "setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+		alrm->enabled,
+		1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	writel(0x00, base + PIC32_ALRMTIME);
+	writel(0x00, base + PIC32_ALRMDATE);
+
+	pic32_rtc_setaie(dev, alrm->enabled);
+
+	clk_disable(pdata->clk);
+	return 0;
+}
+
+static int pic32_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+	void __iomem *base = pdata->reg_base;
+	unsigned int repeat;
+
+	clk_enable(pdata->clk);
+
+	repeat = readw(base + PIC32_RTCALRM);
+	repeat &= PIC32_RTCALRM_ARPT;
+	seq_printf(seq, "periodic_IRQ\t: %s\n", repeat  ? "yes" : "no");
+
+	clk_disable(pdata->clk);
+	return 0;
+}
+
+static const struct rtc_class_ops pic32_rtcops = {
+	.read_time	  = pic32_rtc_gettime,
+	.set_time	  = pic32_rtc_settime,
+	.read_alarm	  = pic32_rtc_getalarm,
+	.set_alarm	  = pic32_rtc_setalarm,
+	.proc		  = pic32_rtc_proc,
+	.alarm_irq_enable = pic32_rtc_setaie,
+};
+
+static void pic32_rtc_enable(struct pic32_rtc_dev *pdata, int en)
+{
+	void __iomem *base = pdata->reg_base;
+
+	if (!base)
+		return;
+
+	clk_enable(pdata->clk);
+	if (!en) {
+		writel(PIC32_RTCCON_ON, base + PIC32_CLR(PIC32_RTCCON));
+	} else {
+		pic32_syskey_unlock();
+
+		writel(PIC32_RTCCON_RTCWREN, base + PIC32_SET(PIC32_RTCCON));
+		writel(3 << 9, base + PIC32_CLR(PIC32_RTCCON));
+
+		if (!(readl(base + PIC32_RTCCON) & PIC32_RTCCON_ON))
+			writel(PIC32_RTCCON_ON, base + PIC32_SET(PIC32_RTCCON));
+	}
+	clk_disable(pdata->clk);
+}
+
+static int pic32_rtc_remove(struct platform_device *pdev)
+{
+	struct pic32_rtc_dev *pdata = platform_get_drvdata(pdev);
+
+	pic32_rtc_setaie(&pdev->dev, 0);
+	clk_unprepare(pdata->clk);
+	pdata->clk = NULL;
+
+	return 0;
+}
+
+static int pic32_rtc_probe(struct platform_device *pdev)
+{
+	struct pic32_rtc_dev *pdata;
+	struct resource *res;
+	int ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pdata);
+
+	pdata->alarm_irq = platform_get_irq(pdev, 0);
+	if (pdata->alarm_irq < 0) {
+		dev_err(&pdev->dev, "no irq for alarm\n");
+		return pdata->alarm_irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->reg_base))
+		return PTR_ERR(pdata->reg_base);
+
+	pdata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pdata->clk)) {
+		dev_err(&pdev->dev, "failed to find rtc clock source\n");
+		ret = PTR_ERR(pdata->clk);
+		pdata->clk = NULL;
+		return ret;
+	}
+
+	spin_lock_init(&pdata->alarm_lock);
+
+	clk_prepare_enable(pdata->clk);
+
+	pic32_rtc_enable(pdata, 1);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+						 &pic32_rtcops,
+						 THIS_MODULE);
+	if (IS_ERR(pdata->rtc)) {
+		ret = PTR_ERR(pdata->rtc);
+		goto err_nortc;
+	}
+
+	pdata->rtc->max_user_freq = 128;
+
+	pic32_rtc_setfreq(&pdev->dev, 1);
+	ret = devm_request_irq(&pdev->dev, pdata->alarm_irq,
+			       pic32_rtc_alarmirq, 0,
+			       dev_name(&pdev->dev), pdata);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"IRQ %d error %d\n", pdata->alarm_irq, ret);
+		goto err_nortc;
+	}
+
+	clk_disable(pdata->clk);
+
+	return 0;
+
+err_nortc:
+	pic32_rtc_enable(pdata, 0);
+	clk_disable_unprepare(pdata->clk);
+
+	return ret;
+}
+
+static const struct of_device_id pic32_rtc_dt_ids[] = {
+	{ .compatible = "microchip,pic32mzda-rtc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_rtc_dt_ids);
+
+static struct platform_driver pic32_rtc_driver = {
+	.probe		= pic32_rtc_probe,
+	.remove		= pic32_rtc_remove,
+	.driver		= {
+		.name	= "pic32-rtc",
+		.of_match_table	= of_match_ptr(pic32_rtc_dt_ids),
+	},
+};
+module_platform_driver(pic32_rtc_driver);
+
+MODULE_DESCRIPTION("Microchip PIC32 RTC Driver");
+MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pl030.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pl030.c
new file mode 100644
index 0000000..343bb6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pl030.c
@@ -0,0 +1,190 @@
+/*
+ *  linux/drivers/rtc/rtc-pl030.c
+ *
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define RTC_DR		(0)
+#define RTC_MR		(4)
+#define RTC_STAT	(8)
+#define RTC_EOI		(8)
+#define RTC_LR		(12)
+#define RTC_CR		(16)
+#define RTC_CR_MIE	(1 << 0)
+
+struct pl030_rtc {
+	struct rtc_device	*rtc;
+	void __iomem		*base;
+};
+
+static irqreturn_t pl030_interrupt(int irq, void *dev_id)
+{
+	struct pl030_rtc *rtc = dev_id;
+	writel(0, rtc->base + RTC_EOI);
+	return IRQ_HANDLED;
+}
+
+static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
+	return 0;
+}
+
+static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pl030_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	/*
+	 * At the moment, we can only deal with non-wildcarded alarm times.
+	 */
+	ret = rtc_valid_tm(&alrm->time);
+	if (ret == 0)
+		ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret == 0)
+		writel(time, rtc->base + RTC_MR);
+	return ret;
+}
+
+static int pl030_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pl030_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(rtc->base + RTC_DR), tm);
+
+	return 0;
+}
+
+/*
+ * Set the RTC time.  Unfortunately, we can't accurately set
+ * the point at which the counter updates.
+ *
+ * Also, since RTC_LR is transferred to RTC_CR on next rising
+ * edge of the 1Hz clock, we must write the time one second
+ * in advance.
+ */
+static int pl030_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pl030_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &time);
+	if (ret == 0)
+		writel(time + 1, rtc->base + RTC_LR);
+
+	return ret;
+}
+
+static const struct rtc_class_ops pl030_ops = {
+	.read_time	= pl030_read_time,
+	.set_time	= pl030_set_time,
+	.read_alarm	= pl030_read_alarm,
+	.set_alarm	= pl030_set_alarm,
+};
+
+static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
+{
+	struct pl030_rtc *rtc;
+	int ret;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto err_req;
+
+	rtc = devm_kzalloc(&dev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc) {
+		ret = -ENOMEM;
+		goto err_rtc;
+	}
+
+	rtc->rtc = devm_rtc_allocate_device(&dev->dev);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		goto err_rtc;
+	}
+
+	rtc->rtc->ops = &pl030_ops;
+	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (!rtc->base) {
+		ret = -ENOMEM;
+		goto err_rtc;
+	}
+
+	__raw_writel(0, rtc->base + RTC_CR);
+	__raw_writel(0, rtc->base + RTC_EOI);
+
+	amba_set_drvdata(dev, rtc);
+
+	ret = request_irq(dev->irq[0], pl030_interrupt, 0,
+			  "rtc-pl030", rtc);
+	if (ret)
+		goto err_irq;
+
+	ret = rtc_register_device(rtc->rtc);
+	if (ret)
+		goto err_reg;
+
+	return 0;
+
+ err_reg:
+	free_irq(dev->irq[0], rtc);
+ err_irq:
+	iounmap(rtc->base);
+ err_rtc:
+	amba_release_regions(dev);
+ err_req:
+	return ret;
+}
+
+static int pl030_remove(struct amba_device *dev)
+{
+	struct pl030_rtc *rtc = amba_get_drvdata(dev);
+
+	writel(0, rtc->base + RTC_CR);
+
+	free_irq(dev->irq[0], rtc);
+	iounmap(rtc->base);
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static struct amba_id pl030_ids[] = {
+	{
+		.id	= 0x00041030,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, pl030_ids);
+
+static struct amba_driver pl030_driver = {
+	.drv		= {
+		.name	= "rtc-pl030",
+	},
+	.probe		= pl030_probe,
+	.remove		= pl030_remove,
+	.id_table	= pl030_ids,
+};
+
+module_amba_driver(pl030_driver);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pl031.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pl031.c
new file mode 100644
index 0000000..a30f24c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pl031.c
@@ -0,0 +1,486 @@
+/*
+ * drivers/rtc/rtc-pl031.c
+ *
+ * Real Time Clock interface for ARM AMBA PrimeCell 031 RTC
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2006 (c) MontaVista Software, Inc.
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+/*
+ * Register definitions
+ */
+#define	RTC_DR		0x00	/* Data read register */
+#define	RTC_MR		0x04	/* Match register */
+#define	RTC_LR		0x08	/* Data load register */
+#define	RTC_CR		0x0c	/* Control register */
+#define	RTC_IMSC	0x10	/* Interrupt mask and set register */
+#define	RTC_RIS		0x14	/* Raw interrupt status register */
+#define	RTC_MIS		0x18	/* Masked interrupt status register */
+#define	RTC_ICR		0x1c	/* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR		0x20	/* Timer data read register */
+#define RTC_TLR		0x24	/* Timer data load register */
+#define RTC_TCR		0x28	/* Timer control register */
+#define RTC_YDR		0x30	/* Year data read register */
+#define RTC_YMR		0x34	/* Year match register */
+#define RTC_YLR		0x38	/* Year data load register */
+
+#define RTC_CR_EN	(1 << 0)	/* counter enable bit */
+#define RTC_CR_CWEN	(1 << 26)	/* Clockwatch enable bit */
+
+#define RTC_TCR_EN	(1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI	(1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI	(1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
+
+/**
+ * struct pl031_vendor_data - per-vendor variations
+ * @ops: the vendor-specific operations used on this silicon version
+ * @clockwatch: if this is an ST Microelectronics silicon version with a
+ *	clockwatch function
+ * @st_weekday: if this is an ST Microelectronics silicon version that need
+ *	the weekday fix
+ * @irqflags: special IRQ flags per variant
+ */
+struct pl031_vendor_data {
+	struct rtc_class_ops ops;
+	bool clockwatch;
+	bool st_weekday;
+	unsigned long irqflags;
+};
+
+struct pl031_local {
+	struct pl031_vendor_data *vendor;
+	struct rtc_device *rtc;
+	void __iomem *base;
+};
+
+static int pl031_alarm_irq_enable(struct device *dev,
+	unsigned int enabled)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	unsigned long imsc;
+
+	/* Clear any pending alarm interrupts. */
+	writel(RTC_BIT_AI, ldata->base + RTC_ICR);
+
+	imsc = readl(ldata->base + RTC_IMSC);
+
+	if (enabled == 1)
+		writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+	else
+		writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+	return 0;
+}
+
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+				 struct rtc_time *tm, unsigned long *st_time,
+	unsigned long *bcd_year)
+{
+	int year = tm->tm_year + 1900;
+	int wday = tm->tm_wday;
+
+	/* wday masking is not working in hardware so wday must be valid */
+	if (wday < -1 || wday > 6) {
+		dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+		return -EINVAL;
+	} else if (wday == -1) {
+		/* wday is not provided, calculate it here */
+		unsigned long time;
+		struct rtc_time calc_tm;
+
+		rtc_tm_to_time(tm, &time);
+		rtc_time_to_tm(time, &calc_tm);
+		wday = calc_tm.tm_wday;
+	}
+
+	*bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+	*st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+			|	(tm->tm_mday << RTC_MDAY_SHIFT)
+			|	((wday + 1) << RTC_WDAY_SHIFT)
+			|	(tm->tm_hour << RTC_HOUR_SHIFT)
+			|	(tm->tm_min << RTC_MIN_SHIFT)
+			|	(tm->tm_sec << RTC_SEC_SHIFT);
+
+	return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+	struct rtc_time *tm)
+{
+	tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+	tm->tm_mon  = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+	tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+	tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+	tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+	tm->tm_min  = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+	tm->tm_sec  = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_year -= 1900;
+
+	return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+			readl(ldata->base + RTC_YDR), tm);
+
+	return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long time;
+	unsigned long bcd_year;
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+	if (ret == 0) {
+		writel(bcd_year, ldata->base + RTC_YLR);
+		writel(time, ldata->base + RTC_LR);
+	}
+
+	return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+			readl(ldata->base + RTC_YMR), &alarm->time);
+
+	alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+	alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+	return ret;
+}
+
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	unsigned long time;
+	unsigned long bcd_year;
+	int ret;
+
+	/* At the moment, we can only deal with non-wildcarded alarm times. */
+	ret = rtc_valid_tm(&alarm->time);
+	if (ret == 0) {
+		ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+					    &time, &bcd_year);
+		if (ret == 0) {
+			writel(bcd_year, ldata->base + RTC_YMR);
+			writel(time, ldata->base + RTC_MR);
+
+			pl031_alarm_irq_enable(dev, alarm->enabled);
+		}
+	}
+
+	return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+	struct pl031_local *ldata = dev_id;
+	unsigned long rtcmis;
+	unsigned long events = 0;
+
+	rtcmis = readl(ldata->base + RTC_MIS);
+	if (rtcmis & RTC_BIT_AI) {
+		writel(RTC_BIT_AI, ldata->base + RTC_ICR);
+		events |= (RTC_AF | RTC_IRQF);
+		rtc_update_irq(ldata->rtc, 1, events);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int pl031_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(ldata->base + RTC_DR), tm);
+
+	return 0;
+}
+
+static int pl031_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long time;
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &time);
+
+	if (ret == 0)
+		writel(time, ldata->base + RTC_LR);
+
+	return ret;
+}
+
+static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
+
+	alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+	alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+	return 0;
+}
+
+static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct pl031_local *ldata = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	/* At the moment, we can only deal with non-wildcarded alarm times. */
+	ret = rtc_valid_tm(&alarm->time);
+	if (ret == 0) {
+		ret = rtc_tm_to_time(&alarm->time, &time);
+		if (ret == 0) {
+			writel(time, ldata->base + RTC_MR);
+			pl031_alarm_irq_enable(dev, alarm->enabled);
+		}
+	}
+
+	return ret;
+}
+
+static int pl031_remove(struct amba_device *adev)
+{
+	struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
+
+	dev_pm_clear_wake_irq(&adev->dev);
+	device_init_wakeup(&adev->dev, false);
+	if (adev->irq[0])
+		free_irq(adev->irq[0], ldata);
+	rtc_device_unregister(ldata->rtc);
+	iounmap(ldata->base);
+	kfree(ldata);
+	amba_release_regions(adev);
+
+	return 0;
+}
+
+static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	int ret;
+	struct pl031_local *ldata;
+	struct pl031_vendor_data *vendor = id->data;
+	struct rtc_class_ops *ops = &vendor->ops;
+	unsigned long time, data;
+
+	ret = amba_request_regions(adev, NULL);
+	if (ret)
+		goto err_req;
+
+	ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
+	if (!ldata) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	ldata->vendor = vendor;
+
+	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
+	if (!ldata->base) {
+		ret = -ENOMEM;
+		goto out_no_remap;
+	}
+
+	amba_set_drvdata(adev, ldata);
+
+	dev_dbg(&adev->dev, "designer ID = 0x%02x\n", amba_manf(adev));
+	dev_dbg(&adev->dev, "revision = 0x%01x\n", amba_rev(adev));
+
+	data = readl(ldata->base + RTC_CR);
+	/* Enable the clockwatch on ST Variants */
+	if (vendor->clockwatch)
+		data |= RTC_CR_CWEN;
+	else
+		data |= RTC_CR_EN;
+	writel(data, ldata->base + RTC_CR);
+
+	/*
+	 * On ST PL031 variants, the RTC reset value does not provide correct
+	 * weekday for 2000-01-01. Correct the erroneous sunday to saturday.
+	 */
+	if (vendor->st_weekday) {
+		if (readl(ldata->base + RTC_YDR) == 0x2000) {
+			time = readl(ldata->base + RTC_DR);
+			if ((time &
+			     (RTC_MON_MASK | RTC_MDAY_MASK | RTC_WDAY_MASK))
+			    == 0x02120000) {
+				time = time | (0x7 << RTC_WDAY_SHIFT);
+				writel(0x2000, ldata->base + RTC_YLR);
+				writel(time, ldata->base + RTC_LR);
+			}
+		}
+	}
+
+	device_init_wakeup(&adev->dev, true);
+	ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+					THIS_MODULE);
+	if (IS_ERR(ldata->rtc)) {
+		ret = PTR_ERR(ldata->rtc);
+		goto out_no_rtc;
+	}
+
+	if (adev->irq[0]) {
+		ret = request_irq(adev->irq[0], pl031_interrupt,
+				  vendor->irqflags, "rtc-pl031", ldata);
+		if (ret)
+			goto out_no_irq;
+		dev_pm_set_wake_irq(&adev->dev, adev->irq[0]);
+	}
+	return 0;
+
+out_no_irq:
+	rtc_device_unregister(ldata->rtc);
+out_no_rtc:
+	iounmap(ldata->base);
+out_no_remap:
+	kfree(ldata);
+out:
+	amba_release_regions(adev);
+err_req:
+
+	return ret;
+}
+
+/* Operations for the original ARM version */
+static struct pl031_vendor_data arm_pl031 = {
+	.ops = {
+		.read_time = pl031_read_time,
+		.set_time = pl031_set_time,
+		.read_alarm = pl031_read_alarm,
+		.set_alarm = pl031_set_alarm,
+		.alarm_irq_enable = pl031_alarm_irq_enable,
+	},
+};
+
+/* The First ST derivative */
+static struct pl031_vendor_data stv1_pl031 = {
+	.ops = {
+		.read_time = pl031_read_time,
+		.set_time = pl031_set_time,
+		.read_alarm = pl031_read_alarm,
+		.set_alarm = pl031_set_alarm,
+		.alarm_irq_enable = pl031_alarm_irq_enable,
+	},
+	.clockwatch = true,
+	.st_weekday = true,
+};
+
+/* And the second ST derivative */
+static struct pl031_vendor_data stv2_pl031 = {
+	.ops = {
+		.read_time = pl031_stv2_read_time,
+		.set_time = pl031_stv2_set_time,
+		.read_alarm = pl031_stv2_read_alarm,
+		.set_alarm = pl031_stv2_set_alarm,
+		.alarm_irq_enable = pl031_alarm_irq_enable,
+	},
+	.clockwatch = true,
+	.st_weekday = true,
+	/*
+	 * This variant shares the IRQ with another block and must not
+	 * suspend that IRQ line.
+	 * TODO check if it shares with IRQF_NO_SUSPEND user, else we can
+	 * remove IRQF_COND_SUSPEND
+	 */
+	.irqflags = IRQF_SHARED | IRQF_COND_SUSPEND,
+};
+
+static struct amba_id pl031_ids[] = {
+	{
+		.id = 0x00041031,
+		.mask = 0x000fffff,
+		.data = &arm_pl031,
+	},
+	/* ST Micro variants */
+	{
+		.id = 0x00180031,
+		.mask = 0x00ffffff,
+		.data = &stv1_pl031,
+	},
+	{
+		.id = 0x00280031,
+		.mask = 0x00ffffff,
+		.data = &stv2_pl031,
+	},
+	{0, 0},
+};
+
+MODULE_DEVICE_TABLE(amba, pl031_ids);
+
+static struct amba_driver pl031_driver = {
+	.drv = {
+		.name = "rtc-pl031",
+	},
+	.id_table = pl031_ids,
+	.probe = pl031_probe,
+	.remove = pl031_remove,
+};
+
+module_amba_driver(pl031_driver);
+
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
+MODULE_DESCRIPTION("ARM AMBA PL031 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pm8xxx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pm8xxx.c
new file mode 100644
index 0000000..3b619b7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pm8xxx.c
@@ -0,0 +1,574 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/* RTC Register offsets from RTC CTRL REG */
+#define PM8XXX_ALARM_CTRL_OFFSET	0x01
+#define PM8XXX_RTC_WRITE_OFFSET		0x02
+#define PM8XXX_RTC_READ_OFFSET		0x06
+#define PM8XXX_ALARM_RW_OFFSET		0x0A
+
+/* RTC_CTRL register bit fields */
+#define PM8xxx_RTC_ENABLE		BIT(7)
+#define PM8xxx_RTC_ALARM_CLEAR		BIT(0)
+
+#define NUM_8_BIT_RTC_REGS		0x4
+
+/**
+ * struct pm8xxx_rtc_regs - describe RTC registers per PMIC versions
+ * @ctrl: base address of control register
+ * @write: base address of write register
+ * @read: base address of read register
+ * @alarm_ctrl: base address of alarm control register
+ * @alarm_ctrl2: base address of alarm control2 register
+ * @alarm_rw: base address of alarm read-write register
+ * @alarm_en: alarm enable mask
+ */
+struct pm8xxx_rtc_regs {
+	unsigned int ctrl;
+	unsigned int write;
+	unsigned int read;
+	unsigned int alarm_ctrl;
+	unsigned int alarm_ctrl2;
+	unsigned int alarm_rw;
+	unsigned int alarm_en;
+};
+
+/**
+ * struct pm8xxx_rtc -  rtc driver internal structure
+ * @rtc:		rtc device for this driver.
+ * @regmap:		regmap used to access RTC registers
+ * @allow_set_time:	indicates whether writing to the RTC is allowed
+ * @rtc_alarm_irq:	rtc alarm irq number.
+ * @ctrl_reg:		rtc control register.
+ * @rtc_dev:		device structure.
+ * @ctrl_reg_lock:	spinlock protecting access to ctrl_reg.
+ */
+struct pm8xxx_rtc {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+	bool allow_set_time;
+	int rtc_alarm_irq;
+	const struct pm8xxx_rtc_regs *regs;
+	struct device *rtc_dev;
+	spinlock_t ctrl_reg_lock;
+};
+
+/*
+ * Steps to write the RTC registers.
+ * 1. Disable alarm if enabled.
+ * 2. Disable rtc if enabled.
+ * 3. Write 0x00 to LSB.
+ * 4. Write Byte[1], Byte[2], Byte[3] then Byte[0].
+ * 5. Enable rtc if disabled in step 2.
+ * 6. Enable alarm if disabled in step 1.
+ */
+static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	int rc, i;
+	unsigned long secs, irq_flags;
+	u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, rtc_disabled = 0;
+	unsigned int ctrl_reg, rtc_ctrl_reg;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	if (!rtc_dd->allow_set_time)
+		return -EACCES;
+
+	rtc_tm_to_time(tm, &secs);
+
+	dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
+
+	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+		value[i] = secs & 0xFF;
+		secs >>= 8;
+	}
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+	if (rc)
+		goto rtc_rw_fail;
+
+	if (ctrl_reg & regs->alarm_en) {
+		alarm_enabled = 1;
+		ctrl_reg &= ~regs->alarm_en;
+		rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
+		if (rc) {
+			dev_err(dev, "Write to RTC Alarm control register failed\n");
+			goto rtc_rw_fail;
+		}
+	}
+
+	/* Disable RTC H/w before writing on RTC register */
+	rc = regmap_read(rtc_dd->regmap, regs->ctrl, &rtc_ctrl_reg);
+	if (rc)
+		goto rtc_rw_fail;
+
+	if (rtc_ctrl_reg & PM8xxx_RTC_ENABLE) {
+		rtc_disabled = 1;
+		rtc_ctrl_reg &= ~PM8xxx_RTC_ENABLE;
+		rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
+		if (rc) {
+			dev_err(dev, "Write to RTC control register failed\n");
+			goto rtc_rw_fail;
+		}
+	}
+
+	/* Write 0 to Byte[0] */
+	rc = regmap_write(rtc_dd->regmap, regs->write, 0);
+	if (rc) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	/* Write Byte[1], Byte[2], Byte[3] */
+	rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
+			       &value[1], sizeof(value) - 1);
+	if (rc) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	/* Write Byte[0] */
+	rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
+	if (rc) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	/* Enable RTC H/w after writing on RTC register */
+	if (rtc_disabled) {
+		rtc_ctrl_reg |= PM8xxx_RTC_ENABLE;
+		rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
+		if (rc) {
+			dev_err(dev, "Write to RTC control register failed\n");
+			goto rtc_rw_fail;
+		}
+	}
+
+	if (alarm_enabled) {
+		ctrl_reg |= regs->alarm_en;
+		rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
+		if (rc) {
+			dev_err(dev, "Write to RTC Alarm control register failed\n");
+			goto rtc_rw_fail;
+		}
+	}
+
+rtc_rw_fail:
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	return rc;
+}
+
+static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned long secs;
+	unsigned int reg;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
+	if (rc) {
+		dev_err(dev, "RTC read data register failed\n");
+		return rc;
+	}
+
+	/*
+	 * Read the LSB again and check if there has been a carry over.
+	 * If there is, redo the read operation.
+	 */
+	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
+	if (rc < 0) {
+		dev_err(dev, "RTC read data register failed\n");
+		return rc;
+	}
+
+	if (unlikely(reg < value[0])) {
+		rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
+				      value, sizeof(value));
+		if (rc) {
+			dev_err(dev, "RTC read data register failed\n");
+			return rc;
+		}
+	}
+
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
+
+	rtc_time_to_tm(secs, tm);
+
+	rc = rtc_valid_tm(tm);
+	if (rc < 0) {
+		dev_err(dev, "Invalid time read from RTC\n");
+		return rc;
+	}
+
+	dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
+		secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+		tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int rc, i;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned int ctrl_reg;
+	unsigned long secs, irq_flags;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	rtc_tm_to_time(&alarm->time, &secs);
+
+	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+		value[i] = secs & 0xFF;
+		secs >>= 8;
+	}
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
+			       sizeof(value));
+	if (rc) {
+		dev_err(dev, "Write to RTC ALARM register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+	if (rc)
+		goto rtc_rw_fail;
+
+	if (alarm->enabled)
+		ctrl_reg |= regs->alarm_en;
+	else
+		ctrl_reg &= ~regs->alarm_en;
+
+	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
+	if (rc) {
+		dev_err(dev, "Write to RTC alarm control register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+		alarm->time.tm_hour, alarm->time.tm_min,
+		alarm->time.tm_sec, alarm->time.tm_mday,
+		alarm->time.tm_mon, alarm->time.tm_year);
+rtc_rw_fail:
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+	return rc;
+}
+
+static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned long secs;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
+			      sizeof(value));
+	if (rc) {
+		dev_err(dev, "RTC alarm time read failed\n");
+		return rc;
+	}
+
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
+	       ((unsigned long)value[3] << 24);
+
+	rtc_time_to_tm(secs, &alarm->time);
+
+	rc = rtc_valid_tm(&alarm->time);
+	if (rc < 0) {
+		dev_err(dev, "Invalid alarm time read from RTC\n");
+		return rc;
+	}
+
+	dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+		alarm->time.tm_hour, alarm->time.tm_min,
+		alarm->time.tm_sec, alarm->time.tm_mday,
+		alarm->time.tm_mon, alarm->time.tm_year);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	int rc;
+	unsigned long irq_flags;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+	unsigned int ctrl_reg;
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+	if (rc)
+		goto rtc_rw_fail;
+
+	if (enable)
+		ctrl_reg |= regs->alarm_en;
+	else
+		ctrl_reg &= ~regs->alarm_en;
+
+	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
+	if (rc) {
+		dev_err(dev, "Write to RTC control register failed\n");
+		goto rtc_rw_fail;
+	}
+
+rtc_rw_fail:
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+	return rc;
+}
+
+static const struct rtc_class_ops pm8xxx_rtc_ops = {
+	.read_time	= pm8xxx_rtc_read_time,
+	.set_time	= pm8xxx_rtc_set_time,
+	.set_alarm	= pm8xxx_rtc_set_alarm,
+	.read_alarm	= pm8xxx_rtc_read_alarm,
+	.alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_id;
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+	unsigned int ctrl_reg;
+	int rc;
+	unsigned long irq_flags;
+
+	rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	/* Clear the alarm enable bit */
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+	if (rc) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		goto rtc_alarm_handled;
+	}
+
+	ctrl_reg &= ~regs->alarm_en;
+
+	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
+	if (rc) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		dev_err(rtc_dd->rtc_dev,
+			"Write to alarm control register failed\n");
+		goto rtc_alarm_handled;
+	}
+
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	/* Clear RTC alarm register */
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
+	if (rc) {
+		dev_err(rtc_dd->rtc_dev,
+			"RTC Alarm control2 register read failed\n");
+		goto rtc_alarm_handled;
+	}
+
+	ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
+	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
+	if (rc)
+		dev_err(rtc_dd->rtc_dev,
+			"Write to RTC Alarm control2 register failed\n");
+
+rtc_alarm_handled:
+	return IRQ_HANDLED;
+}
+
+static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
+{
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+	unsigned int ctrl_reg;
+	int rc;
+
+	/* Check if the RTC is on, else turn it on */
+	rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+	if (rc)
+		return rc;
+
+	if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+		ctrl_reg |= PM8xxx_RTC_ENABLE;
+		rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
+
+static const struct pm8xxx_rtc_regs pm8921_regs = {
+	.ctrl		= 0x11d,
+	.write		= 0x11f,
+	.read		= 0x123,
+	.alarm_rw	= 0x127,
+	.alarm_ctrl	= 0x11d,
+	.alarm_ctrl2	= 0x11e,
+	.alarm_en	= BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8058_regs = {
+	.ctrl		= 0x1e8,
+	.write		= 0x1ea,
+	.read		= 0x1ee,
+	.alarm_rw	= 0x1f2,
+	.alarm_ctrl	= 0x1e8,
+	.alarm_ctrl2	= 0x1e9,
+	.alarm_en	= BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8941_regs = {
+	.ctrl		= 0x6046,
+	.write		= 0x6040,
+	.read		= 0x6048,
+	.alarm_rw	= 0x6140,
+	.alarm_ctrl	= 0x6146,
+	.alarm_ctrl2	= 0x6148,
+	.alarm_en	= BIT(7),
+};
+
+/*
+ * Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
+ */
+static const struct of_device_id pm8xxx_id_table[] = {
+	{ .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+	{ .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
+	{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
+	{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
+
+static int pm8xxx_rtc_probe(struct platform_device *pdev)
+{
+	int rc;
+	struct pm8xxx_rtc *rtc_dd;
+	const struct of_device_id *match;
+
+	match = of_match_node(pm8xxx_id_table, pdev->dev.of_node);
+	if (!match)
+		return -ENXIO;
+
+	rtc_dd = devm_kzalloc(&pdev->dev, sizeof(*rtc_dd), GFP_KERNEL);
+	if (rtc_dd == NULL)
+		return -ENOMEM;
+
+	/* Initialise spinlock to protect RTC control register */
+	spin_lock_init(&rtc_dd->ctrl_reg_lock);
+
+	rtc_dd->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rtc_dd->regmap) {
+		dev_err(&pdev->dev, "Parent regmap unavailable.\n");
+		return -ENXIO;
+	}
+
+	rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
+	if (rtc_dd->rtc_alarm_irq < 0) {
+		dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
+		return -ENXIO;
+	}
+
+	rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
+						      "allow-set-time");
+
+	rtc_dd->regs = match->data;
+	rtc_dd->rtc_dev = &pdev->dev;
+
+	rc = pm8xxx_rtc_enable(rtc_dd);
+	if (rc)
+		return rc;
+
+	platform_set_drvdata(pdev, rtc_dd);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* Register the RTC device */
+	rtc_dd->rtc = devm_rtc_device_register(&pdev->dev, "pm8xxx_rtc",
+					       &pm8xxx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc_dd->rtc)) {
+		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
+			__func__, PTR_ERR(rtc_dd->rtc));
+		return PTR_ERR(rtc_dd->rtc);
+	}
+
+	/* Request the alarm IRQ */
+	rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->rtc_alarm_irq,
+					  pm8xxx_alarm_trigger,
+					  IRQF_TRIGGER_RISING,
+					  "pm8xxx_rtc_alarm", rtc_dd);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
+		return rc;
+	}
+
+	dev_dbg(&pdev->dev, "Probe success !!\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm8xxx_rtc_resume(struct device *dev)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_suspend(struct device *dev)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops,
+			 pm8xxx_rtc_suspend,
+			 pm8xxx_rtc_resume);
+
+static struct platform_driver pm8xxx_rtc_driver = {
+	.probe		= pm8xxx_rtc_probe,
+	.driver	= {
+		.name		= "rtc-pm8xxx",
+		.pm		= &pm8xxx_rtc_pm_ops,
+		.of_match_table	= pm8xxx_id_table,
+	},
+};
+
+module_platform_driver(pm8xxx_rtc_driver);
+
+MODULE_ALIAS("platform:rtc-pm8xxx");
+MODULE_DESCRIPTION("PMIC8xxx RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-proc.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-proc.c
new file mode 100644
index 0000000..31e7e23
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-proc.c
@@ -0,0 +1,150 @@
+/*
+ * RTC subsystem, proc interface
+ *
+ * Copyright (C) 2005-06 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on arch/arm/common/rtctime.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+#include "rtc-core.h"
+
+#define NAME_SIZE	10
+
+#if defined(CONFIG_RTC_HCTOSYS_DEVICE)
+static bool is_rtc_hctosys(struct rtc_device *rtc)
+{
+	int size;
+	char name[NAME_SIZE];
+
+	size = scnprintf(name, NAME_SIZE, "rtc%d", rtc->id);
+	if (size > NAME_SIZE)
+		return false;
+
+	return !strncmp(name, CONFIG_RTC_HCTOSYS_DEVICE, NAME_SIZE);
+}
+#else
+static bool is_rtc_hctosys(struct rtc_device *rtc)
+{
+	return (rtc->id == 0);
+}
+#endif
+
+static int rtc_proc_show(struct seq_file *seq, void *offset)
+{
+	int err;
+	struct rtc_device *rtc = seq->private;
+	const struct rtc_class_ops *ops = rtc->ops;
+	struct rtc_wkalrm alrm;
+	struct rtc_time tm;
+
+	err = rtc_read_time(rtc, &tm);
+	if (err == 0) {
+		seq_printf(seq,
+			"rtc_time\t: %02d:%02d:%02d\n"
+			"rtc_date\t: %04d-%02d-%02d\n",
+			tm.tm_hour, tm.tm_min, tm.tm_sec,
+			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
+	}
+
+	err = rtc_read_alarm(rtc, &alrm);
+	if (err == 0) {
+		seq_printf(seq, "alrm_time\t: ");
+		if ((unsigned int)alrm.time.tm_hour <= 24)
+			seq_printf(seq, "%02d:", alrm.time.tm_hour);
+		else
+			seq_printf(seq, "**:");
+		if ((unsigned int)alrm.time.tm_min <= 59)
+			seq_printf(seq, "%02d:", alrm.time.tm_min);
+		else
+			seq_printf(seq, "**:");
+		if ((unsigned int)alrm.time.tm_sec <= 59)
+			seq_printf(seq, "%02d\n", alrm.time.tm_sec);
+		else
+			seq_printf(seq, "**\n");
+
+		seq_printf(seq, "alrm_date\t: ");
+		if ((unsigned int)alrm.time.tm_year <= 200)
+			seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
+		else
+			seq_printf(seq, "****-");
+		if ((unsigned int)alrm.time.tm_mon <= 11)
+			seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
+		else
+			seq_printf(seq, "**-");
+		if (alrm.time.tm_mday && (unsigned int)alrm.time.tm_mday <= 31)
+			seq_printf(seq, "%02d\n", alrm.time.tm_mday);
+		else
+			seq_printf(seq, "**\n");
+		seq_printf(seq, "alarm_IRQ\t: %s\n",
+				alrm.enabled ? "yes" : "no");
+		seq_printf(seq, "alrm_pending\t: %s\n",
+				alrm.pending ? "yes" : "no");
+		seq_printf(seq, "update IRQ enabled\t: %s\n",
+			(rtc->uie_rtctimer.enabled) ? "yes" : "no");
+		seq_printf(seq, "periodic IRQ enabled\t: %s\n",
+			(rtc->pie_enabled) ? "yes" : "no");
+		seq_printf(seq, "periodic IRQ frequency\t: %d\n",
+			rtc->irq_freq);
+		seq_printf(seq, "max user IRQ frequency\t: %d\n",
+			rtc->max_user_freq);
+	}
+
+	seq_printf(seq, "24hr\t\t: yes\n");
+
+	if (ops->proc)
+		ops->proc(rtc->dev.parent, seq);
+
+	return 0;
+}
+
+static int rtc_proc_open(struct inode *inode, struct file *file)
+{
+	int ret;
+	struct rtc_device *rtc = PDE_DATA(inode);
+
+	if (!try_module_get(rtc->owner))
+		return -ENODEV;
+
+	ret = single_open(file, rtc_proc_show, rtc);
+	if (ret)
+		module_put(rtc->owner);
+	return ret;
+}
+
+static int rtc_proc_release(struct inode *inode, struct file *file)
+{
+	int res = single_release(inode, file);
+	struct rtc_device *rtc = PDE_DATA(inode);
+
+	module_put(rtc->owner);
+	return res;
+}
+
+static const struct file_operations rtc_proc_fops = {
+	.open		= rtc_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= rtc_proc_release,
+};
+
+void rtc_proc_add_device(struct rtc_device *rtc)
+{
+	if (is_rtc_hctosys(rtc))
+		proc_create_data("driver/rtc", 0, NULL, &rtc_proc_fops, rtc);
+}
+
+void rtc_proc_del_device(struct rtc_device *rtc)
+{
+	if (is_rtc_hctosys(rtc))
+		remove_proc_entry("driver/rtc", NULL);
+}
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-ps3.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-ps3.c
new file mode 100644
index 0000000..6a8f5d7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-ps3.c
@@ -0,0 +1,85 @@
+/*
+ * PS3 RTC Driver
+ *
+ * Copyright 2009 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <asm/lv1call.h>
+#include <asm/ps3.h>
+
+
+static u64 read_rtc(void)
+{
+	int result;
+	u64 rtc_val;
+	u64 tb_val;
+
+	result = lv1_get_rtc(&rtc_val, &tb_val);
+	BUG_ON(result);
+
+	return rtc_val;
+}
+
+static int ps3_get_time(struct device *dev, struct rtc_time *tm)
+{
+	rtc_time_to_tm(read_rtc() + ps3_os_area_get_rtc_diff(), tm);
+	return rtc_valid_tm(tm);
+}
+
+static int ps3_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long now;
+
+	rtc_tm_to_time(tm, &now);
+	ps3_os_area_set_rtc_diff(now - read_rtc());
+	return 0;
+}
+
+static const struct rtc_class_ops ps3_rtc_ops = {
+	.read_time = ps3_get_time,
+	.set_time = ps3_set_time,
+};
+
+static int __init ps3_rtc_probe(struct platform_device *dev)
+{
+	struct rtc_device *rtc;
+
+	rtc = devm_rtc_device_register(&dev->dev, "rtc-ps3", &ps3_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(dev, rtc);
+	return 0;
+}
+
+static struct platform_driver ps3_rtc_driver = {
+	.driver = {
+		.name = "rtc-ps3",
+	},
+};
+
+module_platform_driver_probe(ps3_rtc_driver, ps3_rtc_probe);
+
+MODULE_AUTHOR("Sony Corporation");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ps3 RTC driver");
+MODULE_ALIAS("platform:rtc-ps3");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-puv3.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-puv3.c
new file mode 100644
index 0000000..9e83be3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-puv3.c
@@ -0,0 +1,309 @@
+/*
+ * RTC driver code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+static struct resource *puv3_rtc_mem;
+
+static int puv3_rtc_alarmno = IRQ_RTCAlarm;
+static int puv3_rtc_tickno  = IRQ_RTC;
+
+static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
+
+/* IRQ Handlers */
+static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
+{
+	struct rtc_device *rdev = id;
+
+	writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR);
+	rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
+{
+	struct rtc_device *rdev = id;
+
+	writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR);
+	rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+	return IRQ_HANDLED;
+}
+
+/* Update control registers */
+static void puv3_rtc_setaie(struct device *dev, int to)
+{
+	unsigned int tmp;
+
+	dev_dbg(dev, "%s: aie=%d\n", __func__, to);
+
+	tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
+
+	if (to)
+		tmp |= RTC_RTSR_ALE;
+
+	writel(tmp, RTC_RTSR);
+}
+
+static int puv3_rtc_setpie(struct device *dev, int enabled)
+{
+	unsigned int tmp;
+
+	dev_dbg(dev, "%s: pie=%d\n", __func__, enabled);
+
+	spin_lock_irq(&puv3_rtc_pie_lock);
+	tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
+
+	if (enabled)
+		tmp |= RTC_RTSR_HZE;
+
+	writel(tmp, RTC_RTSR);
+	spin_unlock_irq(&puv3_rtc_pie_lock);
+
+	return 0;
+}
+
+/* Time read/write */
+static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
+
+	dev_dbg(dev, "read time %02x.%02x.%02x %02x/%02x/%02x\n",
+		 rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+		 rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+	return 0;
+}
+
+static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long rtc_count = 0;
+
+	dev_dbg(dev, "set time %02d.%02d.%02d %02d/%02d/%02d\n",
+		 tm->tm_year, tm->tm_mon, tm->tm_mday,
+		 tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	rtc_tm_to_time(tm, &rtc_count);
+	writel(rtc_count, RTC_RCNR);
+
+	return 0;
+}
+
+static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_time *alm_tm = &alrm->time;
+
+	rtc_time_to_tm(readl(RTC_RTAR), alm_tm);
+
+	alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
+
+	dev_dbg(dev, "read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+		 alrm->enabled,
+		 alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+		 alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+	return 0;
+}
+
+static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_time *tm = &alrm->time;
+	unsigned long rtcalarm_count = 0;
+
+	dev_dbg(dev, "puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+		 alrm->enabled,
+		 tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
+		 tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
+
+	rtc_tm_to_time(tm, &rtcalarm_count);
+	writel(rtcalarm_count, RTC_RTAR);
+
+	puv3_rtc_setaie(dev, alrm->enabled);
+
+	if (alrm->enabled)
+		enable_irq_wake(puv3_rtc_alarmno);
+	else
+		disable_irq_wake(puv3_rtc_alarmno);
+
+	return 0;
+}
+
+static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	seq_printf(seq, "periodic_IRQ\t: %s\n",
+		     (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no");
+	return 0;
+}
+
+static const struct rtc_class_ops puv3_rtcops = {
+	.read_time	= puv3_rtc_gettime,
+	.set_time	= puv3_rtc_settime,
+	.read_alarm	= puv3_rtc_getalarm,
+	.set_alarm	= puv3_rtc_setalarm,
+	.proc	        = puv3_rtc_proc,
+};
+
+static void puv3_rtc_enable(struct device *dev, int en)
+{
+	if (!en) {
+		writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
+	} else {
+		/* re-enable the device, and check it is ok */
+		if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
+			dev_info(dev, "rtc disabled, re-enabling\n");
+			writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
+		}
+	}
+}
+
+static int puv3_rtc_remove(struct platform_device *dev)
+{
+	puv3_rtc_setpie(&dev->dev, 0);
+	puv3_rtc_setaie(&dev->dev, 0);
+
+	release_resource(puv3_rtc_mem);
+	kfree(puv3_rtc_mem);
+
+	return 0;
+}
+
+static int puv3_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct resource *res;
+	int ret;
+
+	dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
+
+	/* find the IRQs */
+	puv3_rtc_tickno = platform_get_irq(pdev, 1);
+	if (puv3_rtc_tickno < 0) {
+		dev_err(&pdev->dev, "no irq for rtc tick\n");
+		return -ENOENT;
+	}
+
+	puv3_rtc_alarmno = platform_get_irq(pdev, 0);
+	if (puv3_rtc_alarmno < 0) {
+		dev_err(&pdev->dev, "no irq for alarm\n");
+		return -ENOENT;
+	}
+
+	dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
+		 puv3_rtc_tickno, puv3_rtc_alarmno);
+
+	rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	ret = devm_request_irq(&pdev->dev, puv3_rtc_alarmno, puv3_rtc_alarmirq,
+			       0, "pkunity-rtc alarm", rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
+		return ret;
+	}
+
+	ret = devm_request_irq(&pdev->dev, puv3_rtc_tickno, puv3_rtc_tickirq,
+			       0, "pkunity-rtc tick", rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
+		return ret;
+	}
+
+	/* get the memory region */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get memory region resource\n");
+		return -ENOENT;
+	}
+
+	puv3_rtc_mem = request_mem_region(res->start, resource_size(res),
+					  pdev->name);
+
+	if (puv3_rtc_mem == NULL) {
+		dev_err(&pdev->dev, "failed to reserve memory region\n");
+		ret = -ENOENT;
+		goto err_nores;
+	}
+
+	puv3_rtc_enable(&pdev->dev, 1);
+
+	/* register RTC and exit */
+	rtc->ops = &puv3_rtcops;
+	ret = rtc_register_device(rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot attach rtc\n");
+		goto err_nortc;
+	}
+
+	/* platform setup code should have handled this; sigh */
+	if (!device_can_wakeup(&pdev->dev))
+		device_init_wakeup(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+	return 0;
+
+ err_nortc:
+	puv3_rtc_enable(&pdev->dev, 0);
+	release_resource(puv3_rtc_mem);
+
+ err_nores:
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ticnt_save;
+
+static int puv3_rtc_suspend(struct device *dev)
+{
+	/* save RTAR for anyone using periodic interrupts */
+	ticnt_save = readl(RTC_RTAR);
+	puv3_rtc_enable(dev, 0);
+	return 0;
+}
+
+static int puv3_rtc_resume(struct device *dev)
+{
+	puv3_rtc_enable(dev, 1);
+	writel(ticnt_save, RTC_RTAR);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(puv3_rtc_pm_ops, puv3_rtc_suspend, puv3_rtc_resume);
+
+static struct platform_driver puv3_rtc_driver = {
+	.probe		= puv3_rtc_probe,
+	.remove		= puv3_rtc_remove,
+	.driver		= {
+		.name	= "PKUnity-v3-RTC",
+		.pm	= &puv3_rtc_pm_ops,
+	}
+};
+
+module_platform_driver(puv3_rtc_driver);
+
+MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
+MODULE_AUTHOR("Hu Dongliang");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-pxa.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-pxa.c
new file mode 100644
index 0000000..47304f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-pxa.c
@@ -0,0 +1,438 @@
+/*
+ * Real Time Clock interface for XScale PXA27x and PXA3xx
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <mach/hardware.h>
+
+#include "rtc-sa1100.h"
+
+#define RTC_DEF_DIVIDER		(32768 - 1)
+#define RTC_DEF_TRIM		0
+#define MAXFREQ_PERIODIC	1000
+
+/*
+ * PXA Registers and bits definitions
+ */
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_PIAL	(1 << 13)	/* Periodic interrupt detected */
+#define RTSR_SWALE2	(1 << 11)	/* RTC stopwatch alarm2 enable */
+#define RTSR_SWAL2	(1 << 10)	/* RTC stopwatch alarm2 detected */
+#define RTSR_SWALE1	(1 << 9)	/* RTC stopwatch alarm1 enable */
+#define RTSR_SWAL1	(1 << 8)	/* RTC stopwatch alarm1 detected */
+#define RTSR_RDALE2	(1 << 7)	/* RTC alarm2 enable */
+#define RTSR_RDAL2	(1 << 6)	/* RTC alarm2 detected */
+#define RTSR_RDALE1	(1 << 5)	/* RTC alarm1 enable */
+#define RTSR_RDAL1	(1 << 4)	/* RTC alarm1 detected */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+#define RTSR_TRIG_MASK	(RTSR_AL | RTSR_HZ | RTSR_RDAL1 | RTSR_RDAL2\
+			 | RTSR_SWAL1 | RTSR_SWAL2)
+#define RYxR_YEAR_S	9
+#define RYxR_YEAR_MASK	(0xfff << RYxR_YEAR_S)
+#define RYxR_MONTH_S	5
+#define RYxR_MONTH_MASK	(0xf << RYxR_MONTH_S)
+#define RYxR_DAY_MASK	0x1f
+#define RDxR_WOM_S     20
+#define RDxR_WOM_MASK  (0x7 << RDxR_WOM_S)
+#define RDxR_DOW_S     17
+#define RDxR_DOW_MASK  (0x7 << RDxR_DOW_S)
+#define RDxR_HOUR_S	12
+#define RDxR_HOUR_MASK	(0x1f << RDxR_HOUR_S)
+#define RDxR_MIN_S	6
+#define RDxR_MIN_MASK	(0x3f << RDxR_MIN_S)
+#define RDxR_SEC_MASK	0x3f
+
+#define RTSR		0x08
+#define RTTR		0x0c
+#define RDCR		0x10
+#define RYCR		0x14
+#define RDAR1		0x18
+#define RYAR1		0x1c
+#define RTCPICR		0x34
+#define PIAR		0x38
+
+#define rtc_readl(pxa_rtc, reg)	\
+	__raw_readl((pxa_rtc)->base + (reg))
+#define rtc_writel(pxa_rtc, reg, value)	\
+	__raw_writel((value), (pxa_rtc)->base + (reg))
+
+struct pxa_rtc {
+	struct sa1100_rtc sa1100_rtc;
+	struct resource	*ress;
+	void __iomem		*base;
+	struct rtc_device	*rtc;
+	spinlock_t		lock;		/* Protects this structure */
+};
+
+
+static u32 ryxr_calc(struct rtc_time *tm)
+{
+	return ((tm->tm_year + 1900) << RYxR_YEAR_S)
+		| ((tm->tm_mon + 1) << RYxR_MONTH_S)
+		| tm->tm_mday;
+}
+
+static u32 rdxr_calc(struct rtc_time *tm)
+{
+	return ((((tm->tm_mday + 6) / 7) << RDxR_WOM_S) & RDxR_WOM_MASK)
+		| (((tm->tm_wday + 1) << RDxR_DOW_S) & RDxR_DOW_MASK)
+		| (tm->tm_hour << RDxR_HOUR_S)
+		| (tm->tm_min << RDxR_MIN_S)
+		| tm->tm_sec;
+}
+
+static void tm_calc(u32 rycr, u32 rdcr, struct rtc_time *tm)
+{
+	tm->tm_year = ((rycr & RYxR_YEAR_MASK) >> RYxR_YEAR_S) - 1900;
+	tm->tm_mon = (((rycr & RYxR_MONTH_MASK) >> RYxR_MONTH_S)) - 1;
+	tm->tm_mday = (rycr & RYxR_DAY_MASK);
+	tm->tm_wday = ((rycr & RDxR_DOW_MASK) >> RDxR_DOW_S) - 1;
+	tm->tm_hour = (rdcr & RDxR_HOUR_MASK) >> RDxR_HOUR_S;
+	tm->tm_min = (rdcr & RDxR_MIN_MASK) >> RDxR_MIN_S;
+	tm->tm_sec = rdcr & RDxR_SEC_MASK;
+}
+
+static void rtsr_clear_bits(struct pxa_rtc *pxa_rtc, u32 mask)
+{
+	u32 rtsr;
+
+	rtsr = rtc_readl(pxa_rtc, RTSR);
+	rtsr &= ~RTSR_TRIG_MASK;
+	rtsr &= ~mask;
+	rtc_writel(pxa_rtc, RTSR, rtsr);
+}
+
+static void rtsr_set_bits(struct pxa_rtc *pxa_rtc, u32 mask)
+{
+	u32 rtsr;
+
+	rtsr = rtc_readl(pxa_rtc, RTSR);
+	rtsr &= ~RTSR_TRIG_MASK;
+	rtsr |= mask;
+	rtc_writel(pxa_rtc, RTSR, rtsr);
+}
+
+static irqreturn_t pxa_rtc_irq(int irq, void *dev_id)
+{
+	struct platform_device *pdev = to_platform_device(dev_id);
+	struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+	u32 rtsr;
+	unsigned long events = 0;
+
+	spin_lock(&pxa_rtc->lock);
+
+	/* clear interrupt sources */
+	rtsr = rtc_readl(pxa_rtc, RTSR);
+	rtc_writel(pxa_rtc, RTSR, rtsr);
+
+	/* temporary disable rtc interrupts */
+	rtsr_clear_bits(pxa_rtc, RTSR_RDALE1 | RTSR_PIALE | RTSR_HZE);
+
+	/* clear alarm interrupt if it has occurred */
+	if (rtsr & RTSR_RDAL1)
+		rtsr &= ~RTSR_RDALE1;
+
+	/* update irq data & counter */
+	if (rtsr & RTSR_RDAL1)
+		events |= RTC_AF | RTC_IRQF;
+	if (rtsr & RTSR_HZ)
+		events |= RTC_UF | RTC_IRQF;
+	if (rtsr & RTSR_PIAL)
+		events |= RTC_PF | RTC_IRQF;
+
+	rtc_update_irq(pxa_rtc->rtc, 1, events);
+
+	/* enable back rtc interrupts */
+	rtc_writel(pxa_rtc, RTSR, rtsr & ~RTSR_TRIG_MASK);
+
+	spin_unlock(&pxa_rtc->lock);
+	return IRQ_HANDLED;
+}
+
+static int pxa_rtc_open(struct device *dev)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = request_irq(pxa_rtc->sa1100_rtc.irq_1hz, pxa_rtc_irq, 0,
+			  "rtc 1Hz", dev);
+	if (ret < 0) {
+		dev_err(dev, "can't get irq %i, err %d\n",
+			pxa_rtc->sa1100_rtc.irq_1hz, ret);
+		goto err_irq_1Hz;
+	}
+	ret = request_irq(pxa_rtc->sa1100_rtc.irq_alarm, pxa_rtc_irq, 0,
+			  "rtc Alrm", dev);
+	if (ret < 0) {
+		dev_err(dev, "can't get irq %i, err %d\n",
+			pxa_rtc->sa1100_rtc.irq_alarm, ret);
+		goto err_irq_Alrm;
+	}
+
+	return 0;
+
+err_irq_Alrm:
+	free_irq(pxa_rtc->sa1100_rtc.irq_1hz, dev);
+err_irq_1Hz:
+	return ret;
+}
+
+static void pxa_rtc_release(struct device *dev)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	spin_lock_irq(&pxa_rtc->lock);
+	rtsr_clear_bits(pxa_rtc, RTSR_PIALE | RTSR_RDALE1 | RTSR_HZE);
+	spin_unlock_irq(&pxa_rtc->lock);
+
+	free_irq(pxa_rtc->sa1100_rtc.irq_1hz, dev);
+	free_irq(pxa_rtc->sa1100_rtc.irq_alarm, dev);
+}
+
+static int pxa_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	spin_lock_irq(&pxa_rtc->lock);
+
+	if (enabled)
+		rtsr_set_bits(pxa_rtc, RTSR_RDALE1);
+	else
+		rtsr_clear_bits(pxa_rtc, RTSR_RDALE1);
+
+	spin_unlock_irq(&pxa_rtc->lock);
+	return 0;
+}
+
+static int pxa_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+	u32 rycr, rdcr;
+
+	rycr = rtc_readl(pxa_rtc, RYCR);
+	rdcr = rtc_readl(pxa_rtc, RDCR);
+
+	tm_calc(rycr, rdcr, tm);
+	return 0;
+}
+
+static int pxa_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	rtc_writel(pxa_rtc, RYCR, ryxr_calc(tm));
+	rtc_writel(pxa_rtc, RDCR, rdxr_calc(tm));
+
+	return 0;
+}
+
+static int pxa_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+	u32 rtsr, ryar, rdar;
+
+	ryar = rtc_readl(pxa_rtc, RYAR1);
+	rdar = rtc_readl(pxa_rtc, RDAR1);
+	tm_calc(ryar, rdar, &alrm->time);
+
+	rtsr = rtc_readl(pxa_rtc, RTSR);
+	alrm->enabled = (rtsr & RTSR_RDALE1) ? 1 : 0;
+	alrm->pending = (rtsr & RTSR_RDAL1) ? 1 : 0;
+	return 0;
+}
+
+static int pxa_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+	u32 rtsr;
+
+	spin_lock_irq(&pxa_rtc->lock);
+
+	rtc_writel(pxa_rtc, RYAR1, ryxr_calc(&alrm->time));
+	rtc_writel(pxa_rtc, RDAR1, rdxr_calc(&alrm->time));
+
+	rtsr = rtc_readl(pxa_rtc, RTSR);
+	if (alrm->enabled)
+		rtsr |= RTSR_RDALE1;
+	else
+		rtsr &= ~RTSR_RDALE1;
+	rtc_writel(pxa_rtc, RTSR, rtsr);
+
+	spin_unlock_irq(&pxa_rtc->lock);
+
+	return 0;
+}
+
+static int pxa_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	seq_printf(seq, "trim/divider\t: 0x%08x\n", rtc_readl(pxa_rtc, RTTR));
+	seq_printf(seq, "update_IRQ\t: %s\n",
+		   (rtc_readl(pxa_rtc, RTSR) & RTSR_HZE) ? "yes" : "no");
+	seq_printf(seq, "periodic_IRQ\t: %s\n",
+		   (rtc_readl(pxa_rtc, RTSR) & RTSR_PIALE) ? "yes" : "no");
+	seq_printf(seq, "periodic_freq\t: %u\n", rtc_readl(pxa_rtc, PIAR));
+
+	return 0;
+}
+
+static const struct rtc_class_ops pxa_rtc_ops = {
+	.read_time = pxa_rtc_read_time,
+	.set_time = pxa_rtc_set_time,
+	.read_alarm = pxa_rtc_read_alarm,
+	.set_alarm = pxa_rtc_set_alarm,
+	.alarm_irq_enable = pxa_alarm_irq_enable,
+	.proc = pxa_rtc_proc,
+};
+
+static int __init pxa_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pxa_rtc *pxa_rtc;
+	struct sa1100_rtc *sa1100_rtc;
+	int ret;
+
+	pxa_rtc = devm_kzalloc(dev, sizeof(*pxa_rtc), GFP_KERNEL);
+	if (!pxa_rtc)
+		return -ENOMEM;
+	sa1100_rtc = &pxa_rtc->sa1100_rtc;
+
+	spin_lock_init(&pxa_rtc->lock);
+	platform_set_drvdata(pdev, pxa_rtc);
+
+	pxa_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pxa_rtc->ress) {
+		dev_err(dev, "No I/O memory resource defined\n");
+		return -ENXIO;
+	}
+
+	sa1100_rtc->irq_1hz = platform_get_irq(pdev, 0);
+	if (sa1100_rtc->irq_1hz < 0) {
+		dev_err(dev, "No 1Hz IRQ resource defined\n");
+		return -ENXIO;
+	}
+	sa1100_rtc->irq_alarm = platform_get_irq(pdev, 1);
+	if (sa1100_rtc->irq_alarm < 0) {
+		dev_err(dev, "No alarm IRQ resource defined\n");
+		return -ENXIO;
+	}
+
+	pxa_rtc->base = devm_ioremap(dev, pxa_rtc->ress->start,
+				resource_size(pxa_rtc->ress));
+	if (!pxa_rtc->base) {
+		dev_err(dev, "Unable to map pxa RTC I/O memory\n");
+		return -ENOMEM;
+	}
+
+	pxa_rtc_open(dev);
+
+	sa1100_rtc->rcnr = pxa_rtc->base + 0x0;
+	sa1100_rtc->rtsr = pxa_rtc->base + 0x8;
+	sa1100_rtc->rtar = pxa_rtc->base + 0x4;
+	sa1100_rtc->rttr = pxa_rtc->base + 0xc;
+	ret = sa1100_rtc_init(pdev, sa1100_rtc);
+	if (!ret) {
+		dev_err(dev, "Unable to init SA1100 RTC sub-device\n");
+		return ret;
+	}
+
+	rtsr_clear_bits(pxa_rtc, RTSR_PIALE | RTSR_RDALE1 | RTSR_HZE);
+
+	pxa_rtc->rtc = devm_rtc_device_register(&pdev->dev, "pxa-rtc",
+						&pxa_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pxa_rtc->rtc)) {
+		ret = PTR_ERR(pxa_rtc->rtc);
+		dev_err(dev, "Failed to register RTC device -> %d\n", ret);
+		return ret;
+	}
+
+	device_init_wakeup(dev, 1);
+
+	return 0;
+}
+
+static int __exit pxa_rtc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pxa_rtc_release(dev);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_rtc_dt_ids[] = {
+	{ .compatible = "marvell,pxa-rtc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pxa_rtc_dt_ids);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int pxa_rtc_suspend(struct device *dev)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pxa_rtc->sa1100_rtc.irq_alarm);
+	return 0;
+}
+
+static int pxa_rtc_resume(struct device *dev)
+{
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pxa_rtc->sa1100_rtc.irq_alarm);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pxa_rtc_pm_ops, pxa_rtc_suspend, pxa_rtc_resume);
+
+static struct platform_driver pxa_rtc_driver = {
+	.remove		= __exit_p(pxa_rtc_remove),
+	.driver		= {
+		.name	= "pxa-rtc",
+		.of_match_table = of_match_ptr(pxa_rtc_dt_ids),
+		.pm	= &pxa_rtc_pm_ops,
+	},
+};
+
+module_platform_driver_probe(pxa_rtc_driver, pxa_rtc_probe);
+
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("PXA27x/PXA3xx Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-r7301.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-r7301.c
new file mode 100644
index 0000000..28d5408
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-r7301.c
@@ -0,0 +1,453 @@
+/*
+ * EPSON TOYOCOM RTC-7301SF/DG Driver
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * Based on rtc-rp5c01.c
+ *
+ * Datasheet: http://www5.epsondevice.com/en/products/parallel/rtc7301sf.html
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define DRV_NAME "rtc-r7301"
+
+#define RTC7301_1_SEC		0x0	/* Bank 0 and Band 1 */
+#define RTC7301_10_SEC		0x1	/* Bank 0 and Band 1 */
+#define RTC7301_AE		BIT(3)
+#define RTC7301_1_MIN		0x2	/* Bank 0 and Band 1 */
+#define RTC7301_10_MIN		0x3	/* Bank 0 and Band 1 */
+#define RTC7301_1_HOUR		0x4	/* Bank 0 and Band 1 */
+#define RTC7301_10_HOUR		0x5	/* Bank 0 and Band 1 */
+#define RTC7301_DAY_OF_WEEK	0x6	/* Bank 0 and Band 1 */
+#define RTC7301_1_DAY		0x7	/* Bank 0 and Band 1 */
+#define RTC7301_10_DAY		0x8	/* Bank 0 and Band 1 */
+#define RTC7301_1_MONTH		0x9	/* Bank 0 */
+#define RTC7301_10_MONTH	0xa	/* Bank 0 */
+#define RTC7301_1_YEAR		0xb	/* Bank 0 */
+#define RTC7301_10_YEAR		0xc	/* Bank 0 */
+#define RTC7301_100_YEAR	0xd	/* Bank 0 */
+#define RTC7301_1000_YEAR	0xe	/* Bank 0 */
+#define RTC7301_ALARM_CONTROL	0xe	/* Bank 1 */
+#define RTC7301_ALARM_CONTROL_AIE	BIT(0)
+#define RTC7301_ALARM_CONTROL_AF	BIT(1)
+#define RTC7301_TIMER_CONTROL	0xe	/* Bank 2 */
+#define RTC7301_TIMER_CONTROL_TIE	BIT(0)
+#define RTC7301_TIMER_CONTROL_TF	BIT(1)
+#define RTC7301_CONTROL		0xf	/* All banks */
+#define RTC7301_CONTROL_BUSY		BIT(0)
+#define RTC7301_CONTROL_STOP		BIT(1)
+#define RTC7301_CONTROL_BANK_SEL_0	BIT(2)
+#define RTC7301_CONTROL_BANK_SEL_1	BIT(3)
+
+struct rtc7301_priv {
+	struct regmap *regmap;
+	int irq;
+	spinlock_t lock;
+	u8 bank;
+};
+
+static const struct regmap_config rtc7301_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.reg_stride = 4,
+};
+
+static u8 rtc7301_read(struct rtc7301_priv *priv, unsigned int reg)
+{
+	int reg_stride = regmap_get_reg_stride(priv->regmap);
+	unsigned int val;
+
+	regmap_read(priv->regmap, reg_stride * reg, &val);
+
+	return val & 0xf;
+}
+
+static void rtc7301_write(struct rtc7301_priv *priv, u8 val, unsigned int reg)
+{
+	int reg_stride = regmap_get_reg_stride(priv->regmap);
+
+	regmap_write(priv->regmap, reg_stride * reg, val);
+}
+
+static void rtc7301_update_bits(struct rtc7301_priv *priv, unsigned int reg,
+				u8 mask, u8 val)
+{
+	int reg_stride = regmap_get_reg_stride(priv->regmap);
+
+	regmap_update_bits(priv->regmap, reg_stride * reg, mask, val);
+}
+
+static int rtc7301_wait_while_busy(struct rtc7301_priv *priv)
+{
+	int retries = 100;
+
+	while (retries-- > 0) {
+		u8 val;
+
+		val = rtc7301_read(priv, RTC7301_CONTROL);
+		if (!(val & RTC7301_CONTROL_BUSY))
+			return 0;
+
+		usleep_range(200, 300);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void rtc7301_stop(struct rtc7301_priv *priv)
+{
+	rtc7301_update_bits(priv, RTC7301_CONTROL, RTC7301_CONTROL_STOP,
+			    RTC7301_CONTROL_STOP);
+}
+
+static void rtc7301_start(struct rtc7301_priv *priv)
+{
+	rtc7301_update_bits(priv, RTC7301_CONTROL, RTC7301_CONTROL_STOP, 0);
+}
+
+static void rtc7301_select_bank(struct rtc7301_priv *priv, u8 bank)
+{
+	u8 val = 0;
+
+	if (bank == priv->bank)
+		return;
+
+	if (bank & BIT(0))
+		val |= RTC7301_CONTROL_BANK_SEL_0;
+	if (bank & BIT(1))
+		val |= RTC7301_CONTROL_BANK_SEL_1;
+
+	rtc7301_update_bits(priv, RTC7301_CONTROL,
+			    RTC7301_CONTROL_BANK_SEL_0 |
+			    RTC7301_CONTROL_BANK_SEL_1, val);
+
+	priv->bank = bank;
+}
+
+static void rtc7301_get_time(struct rtc7301_priv *priv, struct rtc_time *tm,
+			     bool alarm)
+{
+	int year;
+
+	tm->tm_sec = rtc7301_read(priv, RTC7301_1_SEC);
+	tm->tm_sec += (rtc7301_read(priv, RTC7301_10_SEC) & ~RTC7301_AE) * 10;
+	tm->tm_min = rtc7301_read(priv, RTC7301_1_MIN);
+	tm->tm_min += (rtc7301_read(priv, RTC7301_10_MIN) & ~RTC7301_AE) * 10;
+	tm->tm_hour = rtc7301_read(priv, RTC7301_1_HOUR);
+	tm->tm_hour += (rtc7301_read(priv, RTC7301_10_HOUR) & ~RTC7301_AE) * 10;
+	tm->tm_mday = rtc7301_read(priv, RTC7301_1_DAY);
+	tm->tm_mday += (rtc7301_read(priv, RTC7301_10_DAY) & ~RTC7301_AE) * 10;
+
+	if (alarm) {
+		tm->tm_wday = -1;
+		tm->tm_mon = -1;
+		tm->tm_year = -1;
+		tm->tm_yday = -1;
+		tm->tm_isdst = -1;
+		return;
+	}
+
+	tm->tm_wday = (rtc7301_read(priv, RTC7301_DAY_OF_WEEK) & ~RTC7301_AE);
+	tm->tm_mon = rtc7301_read(priv, RTC7301_10_MONTH) * 10 +
+		     rtc7301_read(priv, RTC7301_1_MONTH) - 1;
+	year = rtc7301_read(priv, RTC7301_1000_YEAR) * 1000 +
+	       rtc7301_read(priv, RTC7301_100_YEAR) * 100 +
+	       rtc7301_read(priv, RTC7301_10_YEAR) * 10 +
+	       rtc7301_read(priv, RTC7301_1_YEAR);
+
+	tm->tm_year = year - 1900;
+}
+
+static void rtc7301_write_time(struct rtc7301_priv *priv, struct rtc_time *tm,
+			       bool alarm)
+{
+	int year;
+
+	rtc7301_write(priv, tm->tm_sec % 10, RTC7301_1_SEC);
+	rtc7301_write(priv, tm->tm_sec / 10, RTC7301_10_SEC);
+
+	rtc7301_write(priv, tm->tm_min % 10, RTC7301_1_MIN);
+	rtc7301_write(priv, tm->tm_min / 10, RTC7301_10_MIN);
+
+	rtc7301_write(priv, tm->tm_hour % 10, RTC7301_1_HOUR);
+	rtc7301_write(priv, tm->tm_hour / 10, RTC7301_10_HOUR);
+
+	rtc7301_write(priv, tm->tm_mday % 10, RTC7301_1_DAY);
+	rtc7301_write(priv, tm->tm_mday / 10, RTC7301_10_DAY);
+
+	/* Don't care for alarm register */
+	rtc7301_write(priv, alarm ? RTC7301_AE : tm->tm_wday,
+		      RTC7301_DAY_OF_WEEK);
+
+	if (alarm)
+		return;
+
+	rtc7301_write(priv, (tm->tm_mon + 1) % 10, RTC7301_1_MONTH);
+	rtc7301_write(priv, (tm->tm_mon + 1) / 10, RTC7301_10_MONTH);
+
+	year = tm->tm_year + 1900;
+
+	rtc7301_write(priv, year % 10, RTC7301_1_YEAR);
+	rtc7301_write(priv, (year / 10) % 10, RTC7301_10_YEAR);
+	rtc7301_write(priv, (year / 100) % 10, RTC7301_100_YEAR);
+	rtc7301_write(priv, year / 1000, RTC7301_1000_YEAR);
+}
+
+static void rtc7301_alarm_irq(struct rtc7301_priv *priv, unsigned int enabled)
+{
+	rtc7301_update_bits(priv, RTC7301_ALARM_CONTROL,
+			    RTC7301_ALARM_CONTROL_AF |
+			    RTC7301_ALARM_CONTROL_AIE,
+			    enabled ? RTC7301_ALARM_CONTROL_AIE : 0);
+}
+
+static int rtc7301_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 0);
+
+	err = rtc7301_wait_while_busy(priv);
+	if (!err)
+		rtc7301_get_time(priv, tm, false);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return err ? err : rtc_valid_tm(tm);
+}
+
+static int rtc7301_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_stop(priv);
+	usleep_range(200, 300);
+	rtc7301_select_bank(priv, 0);
+	rtc7301_write_time(priv, tm, false);
+	rtc7301_start(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rtc7301_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+	u8 alrm_ctrl;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 1);
+	rtc7301_get_time(priv, &alarm->time, true);
+
+	alrm_ctrl = rtc7301_read(priv, RTC7301_ALARM_CONTROL);
+
+	alarm->enabled = !!(alrm_ctrl & RTC7301_ALARM_CONTROL_AIE);
+	alarm->pending = !!(alrm_ctrl & RTC7301_ALARM_CONTROL_AF);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rtc7301_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 1);
+	rtc7301_write_time(priv, &alarm->time, true);
+	rtc7301_alarm_irq(priv, alarm->enabled);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rtc7301_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	if (priv->irq <= 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 1);
+	rtc7301_alarm_irq(priv, enabled);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static const struct rtc_class_ops rtc7301_rtc_ops = {
+	.read_time	= rtc7301_read_time,
+	.set_time	= rtc7301_set_time,
+	.read_alarm	= rtc7301_read_alarm,
+	.set_alarm	= rtc7301_set_alarm,
+	.alarm_irq_enable = rtc7301_alarm_irq_enable,
+};
+
+static irqreturn_t rtc7301_irq_handler(int irq, void *dev_id)
+{
+	struct rtc_device *rtc = dev_id;
+	struct rtc7301_priv *priv = dev_get_drvdata(rtc->dev.parent);
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u8 alrm_ctrl;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 1);
+
+	alrm_ctrl = rtc7301_read(priv, RTC7301_ALARM_CONTROL);
+	if (alrm_ctrl & RTC7301_ALARM_CONTROL_AF) {
+		ret = IRQ_HANDLED;
+		rtc7301_alarm_irq(priv, false);
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+static void rtc7301_init(struct rtc7301_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rtc7301_select_bank(priv, 2);
+	rtc7301_write(priv, 0, RTC7301_TIMER_CONTROL);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int __init rtc7301_rtc_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	void __iomem *regs;
+	struct rtc7301_priv *priv;
+	struct rtc_device *rtc;
+	int ret;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regs = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	priv->regmap = devm_regmap_init_mmio(&dev->dev, regs,
+					     &rtc7301_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->irq = platform_get_irq(dev, 0);
+
+	spin_lock_init(&priv->lock);
+	priv->bank = -1;
+
+	rtc7301_init(priv);
+
+	platform_set_drvdata(dev, priv);
+
+	rtc = devm_rtc_device_register(&dev->dev, DRV_NAME, &rtc7301_rtc_ops,
+				       THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	if (priv->irq > 0) {
+		ret = devm_request_irq(&dev->dev, priv->irq,
+				       rtc7301_irq_handler, IRQF_SHARED,
+				       dev_name(&dev->dev), rtc);
+		if (ret) {
+			priv->irq = 0;
+			dev_err(&dev->dev, "unable to request IRQ\n");
+		} else {
+			device_set_wakeup_capable(&dev->dev, true);
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int rtc7301_suspend(struct device *dev)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+static int rtc7301_resume(struct device *dev)
+{
+	struct rtc7301_priv *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(rtc7301_pm_ops, rtc7301_suspend, rtc7301_resume);
+
+static const struct of_device_id rtc7301_dt_match[] = {
+	{ .compatible = "epson,rtc7301sf" },
+	{ .compatible = "epson,rtc7301dg" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rtc7301_dt_match);
+
+static struct platform_driver rtc7301_rtc_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.of_match_table = rtc7301_dt_match,
+		.pm = &rtc7301_pm_ops,
+	},
+};
+
+module_platform_driver_probe(rtc7301_rtc_driver, rtc7301_rtc_probe);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EPSON TOYOCOM RTC-7301SF/DG Driver");
+MODULE_ALIAS("platform:rtc-r7301");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-r9701.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-r9701.c
new file mode 100644
index 0000000..83d2bcc
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-r9701.c
@@ -0,0 +1,185 @@
+/*
+ * Driver for Epson RTC-9701JE
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on rtc-max6902.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#define RSECCNT	0x00	/* Second Counter */
+#define RMINCNT	0x01	/* Minute Counter */
+#define RHRCNT	0x02	/* Hour Counter */
+#define RWKCNT	0x03	/* Week Counter */
+#define RDAYCNT	0x04	/* Day Counter */
+#define RMONCNT	0x05	/* Month Counter */
+#define RYRCNT	0x06	/* Year Counter */
+#define R100CNT	0x07	/* Y100 Counter */
+#define RMINAR	0x08	/* Minute Alarm */
+#define RHRAR	0x09	/* Hour Alarm */
+#define RWKAR	0x0a	/* Week/Day Alarm */
+#define RTIMCNT	0x0c	/* Interval Timer */
+#define REXT	0x0d	/* Extension Register */
+#define RFLAG	0x0e	/* RTC Flag Register */
+#define RCR	0x0f	/* RTC Control Register */
+
+static int write_reg(struct device *dev, int address, unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = address & 0x7f;
+	buf[1] = data;
+
+	return spi_write(spi, buf, ARRAY_SIZE(buf));
+}
+
+static int read_regs(struct device *dev, unsigned char *regs, int no_regs)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u8 txbuf[1], rxbuf[1];
+	int k, ret;
+
+	ret = 0;
+
+	for (k = 0; ret == 0 && k < no_regs; k++) {
+		txbuf[0] = 0x80 | regs[k];
+		ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
+		regs[k] = rxbuf[0];
+	}
+
+	return ret;
+}
+
+static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
+{
+	int ret;
+	unsigned char buf[] = { RSECCNT, RMINCNT, RHRCNT,
+				RDAYCNT, RMONCNT, RYRCNT };
+
+	ret = read_regs(dev, buf, ARRAY_SIZE(buf));
+	if (ret)
+		return ret;
+
+	memset(dt, 0, sizeof(*dt));
+
+	dt->tm_sec = bcd2bin(buf[0]); /* RSECCNT */
+	dt->tm_min = bcd2bin(buf[1]); /* RMINCNT */
+	dt->tm_hour = bcd2bin(buf[2]); /* RHRCNT */
+
+	dt->tm_mday = bcd2bin(buf[3]); /* RDAYCNT */
+	dt->tm_mon = bcd2bin(buf[4]) - 1; /* RMONCNT */
+	dt->tm_year = bcd2bin(buf[5]) + 100; /* RYRCNT */
+
+	/* the rtc device may contain illegal values on power up
+	 * according to the data sheet. make sure they are valid.
+	 */
+
+	return rtc_valid_tm(dt);
+}
+
+static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
+{
+	int ret, year;
+
+	year = dt->tm_year + 1900;
+	if (year >= 2100 || year < 2000)
+		return -EINVAL;
+
+	ret = write_reg(dev, RHRCNT, bin2bcd(dt->tm_hour));
+	ret = ret ? ret : write_reg(dev, RMINCNT, bin2bcd(dt->tm_min));
+	ret = ret ? ret : write_reg(dev, RSECCNT, bin2bcd(dt->tm_sec));
+	ret = ret ? ret : write_reg(dev, RDAYCNT, bin2bcd(dt->tm_mday));
+	ret = ret ? ret : write_reg(dev, RMONCNT, bin2bcd(dt->tm_mon + 1));
+	ret = ret ? ret : write_reg(dev, RYRCNT, bin2bcd(dt->tm_year - 100));
+	ret = ret ? ret : write_reg(dev, RWKCNT, 1 << dt->tm_wday);
+
+	return ret;
+}
+
+static const struct rtc_class_ops r9701_rtc_ops = {
+	.read_time	= r9701_get_datetime,
+	.set_time	= r9701_set_datetime,
+};
+
+static int r9701_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	struct rtc_time dt;
+	unsigned char tmp;
+	int res;
+
+	tmp = R100CNT;
+	res = read_regs(&spi->dev, &tmp, 1);
+	if (res || tmp != 0x20) {
+		dev_err(&spi->dev, "cannot read RTC register\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * The device seems to be present. Now check if the registers
+	 * contain invalid values. If so, try to write a default date:
+	 * 2000/1/1 00:00:00
+	 */
+	if (r9701_get_datetime(&spi->dev, &dt)) {
+		dev_info(&spi->dev, "trying to repair invalid date/time\n");
+		dt.tm_sec  = 0;
+		dt.tm_min  = 0;
+		dt.tm_hour = 0;
+		dt.tm_mday = 1;
+		dt.tm_mon  = 0;
+		dt.tm_year = 100;
+
+		if (r9701_set_datetime(&spi->dev, &dt) ||
+				r9701_get_datetime(&spi->dev, &dt)) {
+			dev_err(&spi->dev, "cannot repair RTC register\n");
+			return -ENODEV;
+		}
+	}
+
+	rtc = devm_rtc_device_register(&spi->dev, "r9701",
+				&r9701_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	return 0;
+}
+
+static int r9701_remove(struct spi_device *spi)
+{
+	return 0;
+}
+
+static struct spi_driver r9701_driver = {
+	.driver = {
+		.name	= "rtc-r9701",
+	},
+	.probe	= r9701_probe,
+	.remove = r9701_remove,
+};
+
+module_spi_driver(r9701_driver);
+
+MODULE_DESCRIPTION("r9701 spi RTC driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-r9701");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rc5t583.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rc5t583.c
new file mode 100644
index 0000000..68ce774
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rc5t583.c
@@ -0,0 +1,322 @@
+/*
+ * rtc-rc5t583.c -- RICOH RC5T583 Real Time Clock
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Venu Byravarasu <vbyravarasu@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>. */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_rtc {
+	struct rtc_device	*rtc;
+	/* To store the list of enabled interrupts, during system suspend */
+	u32 irqen;
+};
+
+/* Total number of RTC registers needed to set time*/
+#define NUM_TIME_REGS	(RC5T583_RTC_YEAR - RC5T583_RTC_SEC + 1)
+
+/* Total number of RTC registers needed to set Y-Alarm*/
+#define NUM_YAL_REGS	(RC5T583_RTC_AY_YEAR - RC5T583_RTC_AY_MIN + 1)
+
+/* Set Y-Alarm interrupt */
+#define SET_YAL BIT(5)
+
+/* Get Y-Alarm interrupt status*/
+#define GET_YAL_STATUS BIT(3)
+
+static int rc5t583_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	u8 val;
+
+	/* Set Y-Alarm, based on 'enabled' */
+	val = enabled ? SET_YAL : 0;
+
+	return regmap_update_bits(rc5t583->regmap, RC5T583_RTC_CTL1, SET_YAL,
+		val);
+}
+
+/*
+ * Gets current rc5t583 RTC time and date parameters.
+ *
+ * The RTC's time/alarm representation is not what gmtime(3) requires
+ * Linux to use:
+ *
+ *  - Months are 1..12 vs Linux 0-11
+ *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
+ */
+static int rc5t583_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	u8 rtc_data[NUM_TIME_REGS];
+	int ret;
+
+	ret = regmap_bulk_read(rc5t583->regmap, RC5T583_RTC_SEC, rtc_data,
+		NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "RTC read time failed with err:%d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0]);
+	tm->tm_min = bcd2bin(rtc_data[1]);
+	tm->tm_hour = bcd2bin(rtc_data[2]);
+	tm->tm_wday = bcd2bin(rtc_data[3]);
+	tm->tm_mday = bcd2bin(rtc_data[4]);
+	tm->tm_mon = bcd2bin(rtc_data[5]) - 1;
+	tm->tm_year = bcd2bin(rtc_data[6]) + 100;
+
+	return ret;
+}
+
+static int rc5t583_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	unsigned char rtc_data[NUM_TIME_REGS];
+	int ret;
+
+	rtc_data[0] = bin2bcd(tm->tm_sec);
+	rtc_data[1] = bin2bcd(tm->tm_min);
+	rtc_data[2] = bin2bcd(tm->tm_hour);
+	rtc_data[3] = bin2bcd(tm->tm_wday);
+	rtc_data[4] = bin2bcd(tm->tm_mday);
+	rtc_data[5] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[6] = bin2bcd(tm->tm_year - 100);
+
+	ret = regmap_bulk_write(rc5t583->regmap, RC5T583_RTC_SEC, rtc_data,
+		NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "RTC set time failed with error %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rc5t583_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	unsigned char alarm_data[NUM_YAL_REGS];
+	u32 interrupt_enable;
+	int ret;
+
+	ret = regmap_bulk_read(rc5t583->regmap, RC5T583_RTC_AY_MIN, alarm_data,
+		NUM_YAL_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_read_alarm error %d\n", ret);
+		return ret;
+	}
+
+	alm->time.tm_sec = 0;
+	alm->time.tm_min = bcd2bin(alarm_data[0]);
+	alm->time.tm_hour = bcd2bin(alarm_data[1]);
+	alm->time.tm_mday = bcd2bin(alarm_data[2]);
+	alm->time.tm_mon = bcd2bin(alarm_data[3]) - 1;
+	alm->time.tm_year = bcd2bin(alarm_data[4]) + 100;
+
+	ret = regmap_read(rc5t583->regmap, RC5T583_RTC_CTL1, &interrupt_enable);
+	if (ret < 0)
+		return ret;
+
+	/* check if YALE is set */
+	if (interrupt_enable & SET_YAL)
+		alm->enabled = 1;
+
+	return ret;
+}
+
+static int rc5t583_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	unsigned char alarm_data[NUM_YAL_REGS];
+	int ret;
+
+	ret = rc5t583_rtc_alarm_irq_enable(dev, 0);
+	if (ret)
+		return ret;
+
+	alarm_data[0] = bin2bcd(alm->time.tm_min);
+	alarm_data[1] = bin2bcd(alm->time.tm_hour);
+	alarm_data[2] = bin2bcd(alm->time.tm_mday);
+	alarm_data[3] = bin2bcd(alm->time.tm_mon + 1);
+	alarm_data[4] = bin2bcd(alm->time.tm_year - 100);
+
+	ret = regmap_bulk_write(rc5t583->regmap, RC5T583_RTC_AY_MIN, alarm_data,
+		NUM_YAL_REGS);
+	if (ret) {
+		dev_err(dev, "rtc_set_alarm error %d\n", ret);
+		return ret;
+	}
+
+	if (alm->enabled)
+		ret = rc5t583_rtc_alarm_irq_enable(dev, 1);
+
+	return ret;
+}
+
+static irqreturn_t rc5t583_rtc_interrupt(int irq, void *rtc)
+{
+	struct device *dev = rtc;
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	struct rc5t583_rtc *rc5t583_rtc = dev_get_drvdata(dev);
+	unsigned long events = 0;
+	int ret;
+	u32 rtc_reg;
+
+	ret = regmap_read(rc5t583->regmap, RC5T583_RTC_CTL2, &rtc_reg);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	if (rtc_reg & GET_YAL_STATUS) {
+		events = RTC_IRQF | RTC_AF;
+		/* clear pending Y-alarm interrupt bit */
+		rtc_reg &= ~GET_YAL_STATUS;
+	}
+
+	ret = regmap_write(rc5t583->regmap, RC5T583_RTC_CTL2, rtc_reg);
+	if (ret)
+		return IRQ_NONE;
+
+	/* Notify RTC core on event */
+	rtc_update_irq(rc5t583_rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops rc5t583_rtc_ops = {
+	.read_time	= rc5t583_rtc_read_time,
+	.set_time	= rc5t583_rtc_set_time,
+	.read_alarm	= rc5t583_rtc_read_alarm,
+	.set_alarm	= rc5t583_rtc_set_alarm,
+	.alarm_irq_enable = rc5t583_rtc_alarm_irq_enable,
+};
+
+static int rc5t583_rtc_probe(struct platform_device *pdev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t583_rtc *ricoh_rtc;
+	struct rc5t583_platform_data *pmic_plat_data;
+	int ret;
+	int irq;
+
+	ricoh_rtc = devm_kzalloc(&pdev->dev, sizeof(struct rc5t583_rtc),
+			GFP_KERNEL);
+	if (!ricoh_rtc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ricoh_rtc);
+
+	/* Clear pending interrupts */
+	ret = regmap_write(rc5t583->regmap, RC5T583_RTC_CTL2, 0);
+	if (ret < 0)
+		return ret;
+
+	/* clear RTC Adjust register */
+	ret = regmap_write(rc5t583->regmap, RC5T583_RTC_ADJ, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to program rtc_adjust reg\n");
+		return -EBUSY;
+	}
+
+	pmic_plat_data = dev_get_platdata(rc5t583->dev);
+	irq = pmic_plat_data->irq_base;
+	if (irq <= 0) {
+		dev_warn(&pdev->dev, "Wake up is not possible as irq = %d\n",
+			irq);
+		return ret;
+	}
+
+	irq += RC5T583_IRQ_YALE;
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+		rc5t583_rtc_interrupt, IRQF_TRIGGER_LOW,
+		"rtc-rc5t583", &pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "IRQ is not free.\n");
+		return ret;
+	}
+	device_init_wakeup(&pdev->dev, 1);
+
+	ricoh_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+		&rc5t583_rtc_ops, THIS_MODULE);
+	if (IS_ERR(ricoh_rtc->rtc)) {
+		ret = PTR_ERR(ricoh_rtc->rtc);
+		dev_err(&pdev->dev, "RTC device register: err %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Disable rc5t583 RTC interrupts.
+ * Sets status flag to free.
+ */
+static int rc5t583_rtc_remove(struct platform_device *pdev)
+{
+	struct rc5t583_rtc *rc5t583_rtc = platform_get_drvdata(pdev);
+
+	rc5t583_rtc_alarm_irq_enable(&rc5t583_rtc->rtc->dev, 0);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rc5t583_rtc_suspend(struct device *dev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	struct rc5t583_rtc *rc5t583_rtc = dev_get_drvdata(dev);
+	int ret;
+
+	/* Store current list of enabled interrupts*/
+	ret = regmap_read(rc5t583->regmap, RC5T583_RTC_CTL1,
+		&rc5t583_rtc->irqen);
+	return ret;
+}
+
+static int rc5t583_rtc_resume(struct device *dev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev->parent);
+	struct rc5t583_rtc *rc5t583_rtc = dev_get_drvdata(dev);
+
+	/* Restore list of enabled interrupts before suspend */
+	return regmap_write(rc5t583->regmap, RC5T583_RTC_CTL1,
+		rc5t583_rtc->irqen);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rc5t583_rtc_pm_ops, rc5t583_rtc_suspend,
+			rc5t583_rtc_resume);
+
+static struct platform_driver rc5t583_rtc_driver = {
+	.probe		= rc5t583_rtc_probe,
+	.remove		= rc5t583_rtc_remove,
+	.driver		= {
+		.name	= "rtc-rc5t583",
+		.pm	= &rc5t583_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(rc5t583_rtc_driver);
+MODULE_ALIAS("platform:rtc-rc5t583");
+MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rk808.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rk808.c
new file mode 100644
index 0000000..79c8da5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rk808.c
@@ -0,0 +1,460 @@
+/*
+ * RTC driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/mfd/rk808.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+/* RTC_CTRL_REG bitfields */
+#define BIT_RTC_CTRL_REG_STOP_RTC_M		BIT(0)
+
+/* RK808 has a shadowed register for saving a "frozen" RTC time.
+ * When user setting "GET_TIME" to 1, the time will save in this shadowed
+ * register. If set "READSEL" to 1, user read rtc time register, actually
+ * get the time of that moment. If we need the real time, clr this bit.
+ */
+#define BIT_RTC_CTRL_REG_RTC_GET_TIME		BIT(6)
+#define BIT_RTC_CTRL_REG_RTC_READSEL_M		BIT(7)
+#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M	BIT(3)
+#define RTC_STATUS_MASK		0xFE
+
+#define SECONDS_REG_MSK		0x7F
+#define MINUTES_REG_MAK		0x7F
+#define HOURS_REG_MSK		0x3F
+#define DAYS_REG_MSK		0x3F
+#define MONTHS_REG_MSK		0x1F
+#define YEARS_REG_MSK		0xFF
+#define WEEKS_REG_MSK		0x7
+
+/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
+
+#define NUM_TIME_REGS	(RK808_WEEKS_REG - RK808_SECONDS_REG + 1)
+#define NUM_ALARM_REGS	(RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
+
+struct rk808_rtc {
+	struct rk808 *rk808;
+	struct rtc_device *rtc;
+	int irq;
+};
+
+/*
+ * The Rockchip calendar used by the RK808 counts November with 31 days. We use
+ * these translation functions to convert its dates to/from the Gregorian
+ * calendar used by the rest of the world. We arbitrarily define Jan 1st, 2016
+ * as the day when both calendars were in sync, and treat all other dates
+ * relative to that.
+ * NOTE: Other system software (e.g. firmware) that reads the same hardware must
+ * implement this exact same conversion algorithm, with the same anchor date.
+ */
+static time64_t nov2dec_transitions(struct rtc_time *tm)
+{
+	return (tm->tm_year + 1900) - 2016 + (tm->tm_mon + 1 > 11 ? 1 : 0);
+}
+
+static void rockchip_to_gregorian(struct rtc_time *tm)
+{
+	/* If it's Nov 31st, rtc_tm_to_time64() will count that like Dec 1st */
+	time64_t time = rtc_tm_to_time64(tm);
+	rtc_time64_to_tm(time + nov2dec_transitions(tm) * 86400, tm);
+}
+
+static void gregorian_to_rockchip(struct rtc_time *tm)
+{
+	time64_t extra_days = nov2dec_transitions(tm);
+	time64_t time = rtc_tm_to_time64(tm);
+	rtc_time64_to_tm(time - extra_days * 86400, tm);
+
+	/* Compensate if we went back over Nov 31st (will work up to 2381) */
+	if (nov2dec_transitions(tm) < extra_days) {
+		if (tm->tm_mon + 1 == 11)
+			tm->tm_mday++;	/* This may result in 31! */
+		else
+			rtc_time64_to_tm(time - (extra_days - 1) * 86400, tm);
+	}
+}
+
+/* Read current time and date in RTC */
+static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	u8 rtc_data[NUM_TIME_REGS];
+	int ret;
+
+	/* Force an update of the shadowed registers right now */
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
+				 BIT_RTC_CTRL_REG_RTC_GET_TIME);
+	if (ret) {
+		dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * After we set the GET_TIME bit, the rtc time can't be read
+	 * immediately. So we should wait up to 31.25 us, about one cycle of
+	 * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
+	 * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
+	 */
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
+				 0);
+	if (ret) {
+		dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
+			       rtc_data, NUM_TIME_REGS);
+	if (ret) {
+		dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK);
+	tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK);
+	tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK);
+	tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK);
+	tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1;
+	tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100;
+	tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK);
+	rockchip_to_gregorian(tm);
+	dev_dbg(dev, "RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
+		1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+		tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return ret;
+}
+
+/* Set current time and date in RTC */
+static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	u8 rtc_data[NUM_TIME_REGS];
+	int ret;
+
+	dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
+		1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+		tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);
+	gregorian_to_rockchip(tm);
+	rtc_data[0] = bin2bcd(tm->tm_sec);
+	rtc_data[1] = bin2bcd(tm->tm_min);
+	rtc_data[2] = bin2bcd(tm->tm_hour);
+	rtc_data[3] = bin2bcd(tm->tm_mday);
+	rtc_data[4] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[5] = bin2bcd(tm->tm_year - 100);
+	rtc_data[6] = bin2bcd(tm->tm_wday);
+
+	/* Stop RTC while updating the RTC registers */
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+				 BIT_RTC_CTRL_REG_STOP_RTC_M,
+				 BIT_RTC_CTRL_REG_STOP_RTC_M);
+	if (ret) {
+		dev_err(dev, "Failed to update RTC control: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
+				rtc_data, NUM_TIME_REGS);
+	if (ret) {
+		dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
+		return ret;
+	}
+	/* Start RTC again */
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+				 BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
+	if (ret) {
+		dev_err(dev, "Failed to update RTC control: %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+/* Read alarm time and date in RTC */
+static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	u8 alrm_data[NUM_ALARM_REGS];
+	uint32_t int_reg;
+	int ret;
+
+	ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
+			       alrm_data, NUM_ALARM_REGS);
+
+	alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
+	alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK);
+	alrm->time.tm_hour = bcd2bin(alrm_data[2] & HOURS_REG_MSK);
+	alrm->time.tm_mday = bcd2bin(alrm_data[3] & DAYS_REG_MSK);
+	alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1;
+	alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
+	rockchip_to_gregorian(&alrm->time);
+
+	ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
+	if (ret) {
+		dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "alrm read RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
+		1900 + alrm->time.tm_year, alrm->time.tm_mon + 1,
+		alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour,
+		alrm->time.tm_min, alrm->time.tm_sec);
+
+	alrm->enabled = (int_reg & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) ? 1 : 0;
+
+	return 0;
+}
+
+static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
+{
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	int ret;
+
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
+
+	return ret;
+}
+
+static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
+{
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	int ret;
+
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
+				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+
+	return ret;
+}
+
+static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	u8 alrm_data[NUM_ALARM_REGS];
+	int ret;
+
+	ret = rk808_rtc_stop_alarm(rk808_rtc);
+	if (ret) {
+		dev_err(dev, "Failed to stop alarm: %d\n", ret);
+		return ret;
+	}
+	dev_dbg(dev, "alrm set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
+		1900 + alrm->time.tm_year, alrm->time.tm_mon + 1,
+		alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour,
+		alrm->time.tm_min, alrm->time.tm_sec);
+
+	gregorian_to_rockchip(&alrm->time);
+	alrm_data[0] = bin2bcd(alrm->time.tm_sec);
+	alrm_data[1] = bin2bcd(alrm->time.tm_min);
+	alrm_data[2] = bin2bcd(alrm->time.tm_hour);
+	alrm_data[3] = bin2bcd(alrm->time.tm_mday);
+	alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
+	alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
+
+	ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG,
+				alrm_data, NUM_ALARM_REGS);
+	if (ret) {
+		dev_err(dev, "Failed to bulk write: %d\n", ret);
+		return ret;
+	}
+	if (alrm->enabled) {
+		ret = rk808_rtc_start_alarm(rk808_rtc);
+		if (ret) {
+			dev_err(dev, "Failed to start alarm: %d\n", ret);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int rk808_rtc_alarm_irq_enable(struct device *dev,
+				      unsigned int enabled)
+{
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		return rk808_rtc_start_alarm(rk808_rtc);
+
+	return rk808_rtc_stop_alarm(rk808_rtc);
+}
+
+/*
+ * We will just handle setting the frequency and make use the framework for
+ * reading the periodic interupts.
+ *
+ * @freq: Current periodic IRQ freq:
+ * bit 0: every second
+ * bit 1: every minute
+ * bit 2: every hour
+ * bit 3: every day
+ */
+static irqreturn_t rk808_alarm_irq(int irq, void *data)
+{
+	struct rk808_rtc *rk808_rtc = data;
+	struct rk808 *rk808 = rk808_rtc->rk808;
+	struct i2c_client *client = rk808->i2c;
+	int ret;
+
+	ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+			   RTC_STATUS_MASK);
+	if (ret) {
+		dev_err(&client->dev,
+			"%s:Failed to update RTC status: %d\n", __func__, ret);
+		return ret;
+	}
+
+	rtc_update_irq(rk808_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	dev_dbg(&client->dev,
+		 "%s:irq=%d\n", __func__, irq);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops rk808_rtc_ops = {
+	.read_time = rk808_rtc_readtime,
+	.set_time = rk808_rtc_set_time,
+	.read_alarm = rk808_rtc_readalarm,
+	.set_alarm = rk808_rtc_setalarm,
+	.alarm_irq_enable = rk808_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM_SLEEP
+/* Turn off the alarm if it should not be a wake source. */
+static int rk808_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(&pdev->dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rk808_rtc->irq);
+
+	return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int rk808_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rk808_rtc *rk808_rtc = dev_get_drvdata(&pdev->dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rk808_rtc->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
+	rk808_rtc_suspend, rk808_rtc_resume);
+
+static int rk808_rtc_probe(struct platform_device *pdev)
+{
+	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+	struct rk808_rtc *rk808_rtc;
+	struct rtc_time tm;
+	int ret;
+
+	rk808_rtc = devm_kzalloc(&pdev->dev, sizeof(*rk808_rtc), GFP_KERNEL);
+	if (rk808_rtc == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rk808_rtc);
+	rk808_rtc->rk808 = rk808;
+
+	/* start rtc running by default, and use shadowed timer. */
+	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+				 BIT_RTC_CTRL_REG_STOP_RTC_M |
+				 BIT_RTC_CTRL_REG_RTC_READSEL_M,
+				 BIT_RTC_CTRL_REG_RTC_READSEL_M);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to update RTC control: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+			   RTC_STATUS_MASK);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to write RTC status: %d\n", ret);
+			return ret;
+	}
+
+	/* set init time */
+	ret = rk808_rtc_readtime(&pdev->dev, &tm);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read RTC time\n");
+		return ret;
+	}
+	ret = rtc_valid_tm(&tm);
+	if (ret)
+		dev_warn(&pdev->dev, "invalid date/time\n");
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	rk808_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rk808_rtc->rtc))
+		return PTR_ERR(rk808_rtc->rtc);
+
+	rk808_rtc->rtc->ops = &rk808_rtc_ops;
+
+	rk808_rtc->irq = platform_get_irq(pdev, 0);
+	if (rk808_rtc->irq < 0) {
+		if (rk808_rtc->irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Wake up is not possible as irq = %d\n",
+				rk808_rtc->irq);
+		return rk808_rtc->irq;
+	}
+
+	/* request alarm irq of rk808 */
+	ret = devm_request_threaded_irq(&pdev->dev, rk808_rtc->irq, NULL,
+					rk808_alarm_irq, 0,
+					"RTC alarm", rk808_rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+			rk808_rtc->irq, ret);
+		return ret;
+	}
+
+	return rtc_register_device(rk808_rtc->rtc);
+}
+
+static struct platform_driver rk808_rtc_driver = {
+	.probe = rk808_rtc_probe,
+	.driver = {
+		.name = "rk808-rtc",
+		.pm = &rk808_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(rk808_rtc_driver);
+
+MODULE_DESCRIPTION("RTC driver for the rk808 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk808-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rp5c01.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rp5c01.c
new file mode 100644
index 0000000..38a1243
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rp5c01.c
@@ -0,0 +1,293 @@
+/*
+ *  Ricoh RP5C01 RTC Driver
+ *
+ *  Copyright 2009 Geert Uytterhoeven
+ *
+ *  Based on the A3000 TOD code in arch/m68k/amiga/config.c
+ *  Copyright (C) 1993 Hamish Macdonald
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+
+enum {
+	RP5C01_1_SECOND		= 0x0,	/* MODE 00 */
+	RP5C01_10_SECOND	= 0x1,	/* MODE 00 */
+	RP5C01_1_MINUTE		= 0x2,	/* MODE 00 and MODE 01 */
+	RP5C01_10_MINUTE	= 0x3,	/* MODE 00 and MODE 01 */
+	RP5C01_1_HOUR		= 0x4,	/* MODE 00 and MODE 01 */
+	RP5C01_10_HOUR		= 0x5,	/* MODE 00 and MODE 01 */
+	RP5C01_DAY_OF_WEEK	= 0x6,	/* MODE 00 and MODE 01 */
+	RP5C01_1_DAY		= 0x7,	/* MODE 00 and MODE 01 */
+	RP5C01_10_DAY		= 0x8,	/* MODE 00 and MODE 01 */
+	RP5C01_1_MONTH		= 0x9,	/* MODE 00 */
+	RP5C01_10_MONTH		= 0xa,	/* MODE 00 */
+	RP5C01_1_YEAR		= 0xb,	/* MODE 00 */
+	RP5C01_10_YEAR		= 0xc,	/* MODE 00 */
+
+	RP5C01_12_24_SELECT	= 0xa,	/* MODE 01 */
+	RP5C01_LEAP_YEAR	= 0xb,	/* MODE 01 */
+
+	RP5C01_MODE		= 0xd,	/* all modes */
+	RP5C01_TEST		= 0xe,	/* all modes */
+	RP5C01_RESET		= 0xf,	/* all modes */
+};
+
+#define RP5C01_12_24_SELECT_12	(0 << 0)
+#define RP5C01_12_24_SELECT_24	(1 << 0)
+
+#define RP5C01_10_HOUR_AM	(0 << 1)
+#define RP5C01_10_HOUR_PM	(1 << 1)
+
+#define RP5C01_MODE_TIMER_EN	(1 << 3)	/* timer enable */
+#define RP5C01_MODE_ALARM_EN	(1 << 2)	/* alarm enable */
+
+#define RP5C01_MODE_MODE_MASK	(3 << 0)
+#define RP5C01_MODE_MODE00	(0 << 0)	/* time */
+#define RP5C01_MODE_MODE01	(1 << 0)	/* alarm, 12h/24h, leap year */
+#define RP5C01_MODE_RAM_BLOCK10	(2 << 0)	/* RAM 4 bits x 13 */
+#define RP5C01_MODE_RAM_BLOCK11	(3 << 0)	/* RAM 4 bits x 13 */
+
+#define RP5C01_RESET_1HZ_PULSE	(1 << 3)
+#define RP5C01_RESET_16HZ_PULSE	(1 << 2)
+#define RP5C01_RESET_SECOND	(1 << 1)	/* reset divider stages for */
+						/* seconds or smaller units */
+#define RP5C01_RESET_ALARM	(1 << 0)	/* reset all alarm registers */
+
+
+struct rp5c01_priv {
+	u32 __iomem *regs;
+	struct rtc_device *rtc;
+	spinlock_t lock;	/* against concurrent RTC/NVRAM access */
+	struct bin_attribute nvram_attr;
+};
+
+static inline unsigned int rp5c01_read(struct rp5c01_priv *priv,
+				       unsigned int reg)
+{
+	return __raw_readl(&priv->regs[reg]) & 0xf;
+}
+
+static inline void rp5c01_write(struct rp5c01_priv *priv, unsigned int val,
+				unsigned int reg)
+{
+	__raw_writel(val, &priv->regs[reg]);
+}
+
+static void rp5c01_lock(struct rp5c01_priv *priv)
+{
+	rp5c01_write(priv, RP5C01_MODE_MODE00, RP5C01_MODE);
+}
+
+static void rp5c01_unlock(struct rp5c01_priv *priv)
+{
+	rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+		     RP5C01_MODE);
+}
+
+static int rp5c01_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+
+	spin_lock_irq(&priv->lock);
+	rp5c01_lock(priv);
+
+	tm->tm_sec  = rp5c01_read(priv, RP5C01_10_SECOND) * 10 +
+		      rp5c01_read(priv, RP5C01_1_SECOND);
+	tm->tm_min  = rp5c01_read(priv, RP5C01_10_MINUTE) * 10 +
+		      rp5c01_read(priv, RP5C01_1_MINUTE);
+	tm->tm_hour = rp5c01_read(priv, RP5C01_10_HOUR) * 10 +
+		      rp5c01_read(priv, RP5C01_1_HOUR);
+	tm->tm_mday = rp5c01_read(priv, RP5C01_10_DAY) * 10 +
+		      rp5c01_read(priv, RP5C01_1_DAY);
+	tm->tm_wday = rp5c01_read(priv, RP5C01_DAY_OF_WEEK);
+	tm->tm_mon  = rp5c01_read(priv, RP5C01_10_MONTH) * 10 +
+		      rp5c01_read(priv, RP5C01_1_MONTH) - 1;
+	tm->tm_year = rp5c01_read(priv, RP5C01_10_YEAR) * 10 +
+		      rp5c01_read(priv, RP5C01_1_YEAR);
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	rp5c01_unlock(priv);
+	spin_unlock_irq(&priv->lock);
+
+	return rtc_valid_tm(tm);
+}
+
+static int rp5c01_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+
+	spin_lock_irq(&priv->lock);
+	rp5c01_lock(priv);
+
+	rp5c01_write(priv, tm->tm_sec / 10, RP5C01_10_SECOND);
+	rp5c01_write(priv, tm->tm_sec % 10, RP5C01_1_SECOND);
+	rp5c01_write(priv, tm->tm_min / 10, RP5C01_10_MINUTE);
+	rp5c01_write(priv, tm->tm_min % 10, RP5C01_1_MINUTE);
+	rp5c01_write(priv, tm->tm_hour / 10, RP5C01_10_HOUR);
+	rp5c01_write(priv, tm->tm_hour % 10, RP5C01_1_HOUR);
+	rp5c01_write(priv, tm->tm_mday / 10, RP5C01_10_DAY);
+	rp5c01_write(priv, tm->tm_mday % 10, RP5C01_1_DAY);
+	if (tm->tm_wday != -1)
+		rp5c01_write(priv, tm->tm_wday, RP5C01_DAY_OF_WEEK);
+	rp5c01_write(priv, (tm->tm_mon + 1) / 10, RP5C01_10_MONTH);
+	rp5c01_write(priv, (tm->tm_mon + 1) % 10, RP5C01_1_MONTH);
+	if (tm->tm_year >= 100)
+		tm->tm_year -= 100;
+	rp5c01_write(priv, tm->tm_year / 10, RP5C01_10_YEAR);
+	rp5c01_write(priv, tm->tm_year % 10, RP5C01_1_YEAR);
+
+	rp5c01_unlock(priv);
+	spin_unlock_irq(&priv->lock);
+	return 0;
+}
+
+static const struct rtc_class_ops rp5c01_rtc_ops = {
+	.read_time	= rp5c01_read_time,
+	.set_time	= rp5c01_set_time,
+};
+
+
+/*
+ * The NVRAM is organized as 2 blocks of 13 nibbles of 4 bits.
+ * We provide access to them like AmigaOS does: the high nibble of each 8-bit
+ * byte is stored in BLOCK10, the low nibble in BLOCK11.
+ */
+
+static ssize_t rp5c01_nvram_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+	ssize_t count;
+
+	spin_lock_irq(&priv->lock);
+
+	for (count = 0; count < size; count++) {
+		u8 data;
+
+		rp5c01_write(priv,
+			     RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK10,
+			     RP5C01_MODE);
+		data = rp5c01_read(priv, pos) << 4;
+		rp5c01_write(priv,
+			     RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK11,
+			     RP5C01_MODE);
+		data |= rp5c01_read(priv, pos++);
+		rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+			     RP5C01_MODE);
+		*buf++ = data;
+	}
+
+	spin_unlock_irq(&priv->lock);
+	return count;
+}
+
+static ssize_t rp5c01_nvram_write(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+	ssize_t count;
+
+	spin_lock_irq(&priv->lock);
+
+	for (count = 0; count < size; count++) {
+		u8 data = *buf++;
+
+		rp5c01_write(priv,
+			     RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK10,
+			     RP5C01_MODE);
+		rp5c01_write(priv, data >> 4, pos);
+		rp5c01_write(priv,
+			     RP5C01_MODE_TIMER_EN | RP5C01_MODE_RAM_BLOCK11,
+			     RP5C01_MODE);
+		rp5c01_write(priv, data & 0xf, pos++);
+		rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+			     RP5C01_MODE);
+	}
+
+	spin_unlock_irq(&priv->lock);
+	return count;
+}
+
+static int __init rp5c01_rtc_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	struct rp5c01_priv *priv;
+	struct rtc_device *rtc;
+	int error;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = devm_ioremap(&dev->dev, res->start, resource_size(res));
+	if (!priv->regs)
+		return -ENOMEM;
+
+	sysfs_bin_attr_init(&priv->nvram_attr);
+	priv->nvram_attr.attr.name = "nvram";
+	priv->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
+	priv->nvram_attr.read = rp5c01_nvram_read;
+	priv->nvram_attr.write = rp5c01_nvram_write;
+	priv->nvram_attr.size = RP5C01_MODE;
+
+	spin_lock_init(&priv->lock);
+
+	platform_set_drvdata(dev, priv);
+
+	rtc = devm_rtc_allocate_device(&dev->dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	rtc->ops = &rp5c01_rtc_ops;
+
+	priv->rtc = rtc;
+
+	error = sysfs_create_bin_file(&dev->dev.kobj, &priv->nvram_attr);
+	if (error)
+		return error;
+
+	error = rtc_register_device(rtc);
+	if (error) {
+		sysfs_remove_bin_file(&dev->dev.kobj, &priv->nvram_attr);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __exit rp5c01_rtc_remove(struct platform_device *dev)
+{
+	struct rp5c01_priv *priv = platform_get_drvdata(dev);
+
+	sysfs_remove_bin_file(&dev->dev.kobj, &priv->nvram_attr);
+	return 0;
+}
+
+static struct platform_driver rp5c01_rtc_driver = {
+	.driver	= {
+		.name	= "rtc-rp5c01",
+	},
+	.remove	= __exit_p(rp5c01_rtc_remove),
+};
+
+module_platform_driver_probe(rp5c01_rtc_driver, rp5c01_rtc_probe);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ricoh RP5C01 RTC driver");
+MODULE_ALIAS("platform:rtc-rp5c01");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c313.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c313.c
new file mode 100644
index 0000000..89f38e3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c313.c
@@ -0,0 +1,412 @@
+/*
+ * Ricoh RS5C313 RTC device/driver
+ *  Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ *  2005-09-19 modifed by kogiidena
+ *
+ * Based on the old drivers/char/rs5c313_rtc.c  by:
+ *  Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ *
+ * Based on code written by Paul Gortmaker.
+ *  Copyright (C) 1996 Paul Gortmaker
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Based on other minimal char device drivers, like Alan's
+ * watchdog, Ted's random, etc. etc.
+ *
+ *	1.07	Paul Gortmaker.
+ *	1.08	Miquel van Smoorenburg: disallow certain things on the
+ *		DEC Alpha as the CMOS clock is also used for other things.
+ *	1.09	Nikita Schmidt: epoch support and some Alpha cleanup.
+ *	1.09a	Pete Zaitcev: Sun SPARC
+ *	1.09b	Jeff Garzik: Modularize, init cleanup
+ *	1.09c	Jeff Garzik: SMP cleanup
+ *	1.10    Paul Barton-Davis: add support for async I/O
+ *	1.10a	Andrea Arcangeli: Alpha updates
+ *	1.10b	Andrew Morton: SMP lock fix
+ *	1.10c	Cesar Barros: SMP locking fixes and cleanup
+ *	1.10d	Paul Gortmaker: delete paranoia check in rtc_exit
+ *	1.10e	Maciej W. Rozycki: Handle DECstation's year weirdness.
+ *      1.11    Takashi Iwai: Kernel access functions
+ *			      rtc_register/rtc_unregister/rtc_control
+ *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
+ *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
+ *		CONFIG_HPET_EMULATE_RTC
+ *	1.13	Nobuhiro Iwamatsu: Updata driver.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define DRV_NAME	"rs5c313"
+
+#ifdef CONFIG_SH_LANDISK
+/*****************************************************/
+/* LANDISK dependence part of RS5C313                */
+/*****************************************************/
+
+#define SCSMR1		0xFFE00000
+#define SCSCR1		0xFFE00008
+#define SCSMR1_CA	0x80
+#define SCSCR1_CKE	0x03
+#define SCSPTR1		0xFFE0001C
+#define SCSPTR1_EIO	0x80
+#define SCSPTR1_SPB1IO	0x08
+#define SCSPTR1_SPB1DT	0x04
+#define SCSPTR1_SPB0IO	0x02
+#define SCSPTR1_SPB0DT	0x01
+
+#define SDA_OEN		SCSPTR1_SPB1IO
+#define SDA		SCSPTR1_SPB1DT
+#define SCL_OEN		SCSPTR1_SPB0IO
+#define SCL		SCSPTR1_SPB0DT
+
+/* RICOH RS5C313 CE port */
+#define RS5C313_CE	0xB0000003
+
+/* RICOH RS5C313 CE port bit */
+#define RS5C313_CE_RTCCE	0x02
+
+/* SCSPTR1 data */
+unsigned char scsptr1_data;
+
+#define RS5C313_CEENABLE    __raw_writeb(RS5C313_CE_RTCCE, RS5C313_CE);
+#define RS5C313_CEDISABLE   __raw_writeb(0x00, RS5C313_CE)
+#define RS5C313_MISCOP      __raw_writeb(0x02, 0xB0000008)
+
+static void rs5c313_init_port(void)
+{
+	/* Set SCK as I/O port and Initialize SCSPTR1 data & I/O port. */
+	__raw_writeb(__raw_readb(SCSMR1) & ~SCSMR1_CA, SCSMR1);
+	__raw_writeb(__raw_readb(SCSCR1) & ~SCSCR1_CKE, SCSCR1);
+
+	/* And Initialize SCL for RS5C313 clock */
+	scsptr1_data = __raw_readb(SCSPTR1) | SCL;	/* SCL:H */
+	__raw_writeb(scsptr1_data, SCSPTR1);
+	scsptr1_data = __raw_readb(SCSPTR1) | SCL_OEN;	/* SCL output enable */
+	__raw_writeb(scsptr1_data, SCSPTR1);
+	RS5C313_CEDISABLE;	/* CE:L */
+}
+
+static void rs5c313_write_data(unsigned char data)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		/* SDA:Write Data */
+		scsptr1_data = (scsptr1_data & ~SDA) |
+				((((0x80 >> i) & data) >> (7 - i)) << 2);
+		__raw_writeb(scsptr1_data, SCSPTR1);
+		if (i == 0) {
+			scsptr1_data |= SDA_OEN;	/* SDA:output enable */
+			__raw_writeb(scsptr1_data, SCSPTR1);
+		}
+		ndelay(700);
+		scsptr1_data &= ~SCL;	/* SCL:L */
+		__raw_writeb(scsptr1_data, SCSPTR1);
+		ndelay(700);
+		scsptr1_data |= SCL;	/* SCL:H */
+		__raw_writeb(scsptr1_data, SCSPTR1);
+	}
+
+	scsptr1_data &= ~SDA_OEN;	/* SDA:output disable */
+	__raw_writeb(scsptr1_data, SCSPTR1);
+}
+
+static unsigned char rs5c313_read_data(void)
+{
+	int i;
+	unsigned char data = 0;
+
+	for (i = 0; i < 8; i++) {
+		ndelay(700);
+		/* SDA:Read Data */
+		data |= ((__raw_readb(SCSPTR1) & SDA) >> 2) << (7 - i);
+		scsptr1_data &= ~SCL;	/* SCL:L */
+		__raw_writeb(scsptr1_data, SCSPTR1);
+		ndelay(700);
+		scsptr1_data |= SCL;	/* SCL:H */
+		__raw_writeb(scsptr1_data, SCSPTR1);
+	}
+	return data & 0x0F;
+}
+
+#endif /* CONFIG_SH_LANDISK */
+
+/*****************************************************/
+/* machine independence part of RS5C313              */
+/*****************************************************/
+
+/* RICOH RS5C313 address */
+#define RS5C313_ADDR_SEC	0x00
+#define RS5C313_ADDR_SEC10	0x01
+#define RS5C313_ADDR_MIN	0x02
+#define RS5C313_ADDR_MIN10	0x03
+#define RS5C313_ADDR_HOUR	0x04
+#define RS5C313_ADDR_HOUR10	0x05
+#define RS5C313_ADDR_WEEK	0x06
+#define RS5C313_ADDR_INTINTVREG	0x07
+#define RS5C313_ADDR_DAY	0x08
+#define RS5C313_ADDR_DAY10	0x09
+#define RS5C313_ADDR_MON	0x0A
+#define RS5C313_ADDR_MON10	0x0B
+#define RS5C313_ADDR_YEAR	0x0C
+#define RS5C313_ADDR_YEAR10	0x0D
+#define RS5C313_ADDR_CNTREG	0x0E
+#define RS5C313_ADDR_TESTREG	0x0F
+
+/* RICOH RS5C313 control register */
+#define RS5C313_CNTREG_ADJ_BSY	0x01
+#define RS5C313_CNTREG_WTEN_XSTP	0x02
+#define RS5C313_CNTREG_12_24	0x04
+#define RS5C313_CNTREG_CTFG	0x08
+
+/* RICOH RS5C313 test register */
+#define RS5C313_TESTREG_TEST	0x01
+
+/* RICOH RS5C313 control bit */
+#define RS5C313_CNTBIT_READ	0x40
+#define RS5C313_CNTBIT_AD	0x20
+#define RS5C313_CNTBIT_DT	0x10
+
+static unsigned char rs5c313_read_reg(unsigned char addr)
+{
+
+	rs5c313_write_data(addr | RS5C313_CNTBIT_READ | RS5C313_CNTBIT_AD);
+	return rs5c313_read_data();
+}
+
+static void rs5c313_write_reg(unsigned char addr, unsigned char data)
+{
+	data &= 0x0f;
+	rs5c313_write_data(addr | RS5C313_CNTBIT_AD);
+	rs5c313_write_data(data | RS5C313_CNTBIT_DT);
+	return;
+}
+
+static inline unsigned char rs5c313_read_cntreg(void)
+{
+	return rs5c313_read_reg(RS5C313_ADDR_CNTREG);
+}
+
+static inline void rs5c313_write_cntreg(unsigned char data)
+{
+	rs5c313_write_reg(RS5C313_ADDR_CNTREG, data);
+}
+
+static inline void rs5c313_write_intintvreg(unsigned char data)
+{
+	rs5c313_write_reg(RS5C313_ADDR_INTINTVREG, data);
+}
+
+static int rs5c313_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	int data;
+	int cnt;
+
+	cnt = 0;
+	while (1) {
+		RS5C313_CEENABLE;	/* CE:H */
+
+		/* Initialize control reg. 24 hour */
+		rs5c313_write_cntreg(0x04);
+
+		if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY))
+			break;
+
+		RS5C313_CEDISABLE;
+		ndelay(700);	/* CE:L */
+
+		if (cnt++ > 100) {
+			dev_err(dev, "%s: timeout error\n", __func__);
+			return -EIO;
+		}
+	}
+
+	data = rs5c313_read_reg(RS5C313_ADDR_SEC);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_SEC10) << 4);
+	tm->tm_sec = bcd2bin(data);
+
+	data = rs5c313_read_reg(RS5C313_ADDR_MIN);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_MIN10) << 4);
+	tm->tm_min = bcd2bin(data);
+
+	data = rs5c313_read_reg(RS5C313_ADDR_HOUR);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_HOUR10) << 4);
+	tm->tm_hour = bcd2bin(data);
+
+	data = rs5c313_read_reg(RS5C313_ADDR_DAY);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_DAY10) << 4);
+	tm->tm_mday = bcd2bin(data);
+
+	data = rs5c313_read_reg(RS5C313_ADDR_MON);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_MON10) << 4);
+	tm->tm_mon = bcd2bin(data) - 1;
+
+	data = rs5c313_read_reg(RS5C313_ADDR_YEAR);
+	data |= (rs5c313_read_reg(RS5C313_ADDR_YEAR10) << 4);
+	tm->tm_year = bcd2bin(data);
+
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;
+
+	data = rs5c313_read_reg(RS5C313_ADDR_WEEK);
+	tm->tm_wday = bcd2bin(data);
+
+	RS5C313_CEDISABLE;
+	ndelay(700);		/* CE:L */
+
+	return 0;
+}
+
+static int rs5c313_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	int data;
+	int cnt;
+
+	cnt = 0;
+	/* busy check. */
+	while (1) {
+		RS5C313_CEENABLE;	/* CE:H */
+
+		/* Initiatlize control reg. 24 hour */
+		rs5c313_write_cntreg(0x04);
+
+		if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY))
+			break;
+		RS5C313_MISCOP;
+		RS5C313_CEDISABLE;
+		ndelay(700);	/* CE:L */
+
+		if (cnt++ > 100) {
+			dev_err(dev, "%s: timeout error\n", __func__);
+			return -EIO;
+		}
+	}
+
+	data = bin2bcd(tm->tm_sec);
+	rs5c313_write_reg(RS5C313_ADDR_SEC, data);
+	rs5c313_write_reg(RS5C313_ADDR_SEC10, (data >> 4));
+
+	data = bin2bcd(tm->tm_min);
+	rs5c313_write_reg(RS5C313_ADDR_MIN, data);
+	rs5c313_write_reg(RS5C313_ADDR_MIN10, (data >> 4));
+
+	data = bin2bcd(tm->tm_hour);
+	rs5c313_write_reg(RS5C313_ADDR_HOUR, data);
+	rs5c313_write_reg(RS5C313_ADDR_HOUR10, (data >> 4));
+
+	data = bin2bcd(tm->tm_mday);
+	rs5c313_write_reg(RS5C313_ADDR_DAY, data);
+	rs5c313_write_reg(RS5C313_ADDR_DAY10, (data >> 4));
+
+	data = bin2bcd(tm->tm_mon + 1);
+	rs5c313_write_reg(RS5C313_ADDR_MON, data);
+	rs5c313_write_reg(RS5C313_ADDR_MON10, (data >> 4));
+
+	data = bin2bcd(tm->tm_year % 100);
+	rs5c313_write_reg(RS5C313_ADDR_YEAR, data);
+	rs5c313_write_reg(RS5C313_ADDR_YEAR10, (data >> 4));
+
+	data = bin2bcd(tm->tm_wday);
+	rs5c313_write_reg(RS5C313_ADDR_WEEK, data);
+
+	RS5C313_CEDISABLE;	/* CE:H */
+	ndelay(700);
+
+	return 0;
+}
+
+static void rs5c313_check_xstp_bit(void)
+{
+	struct rtc_time tm;
+	int cnt;
+
+	RS5C313_CEENABLE;	/* CE:H */
+	if (rs5c313_read_cntreg() & RS5C313_CNTREG_WTEN_XSTP) {
+		/* INT interval reg. OFF */
+		rs5c313_write_intintvreg(0x00);
+		/* Initialize control reg. 24 hour & adjust */
+		rs5c313_write_cntreg(0x07);
+
+		/* busy check. */
+		for (cnt = 0; cnt < 100; cnt++) {
+			if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY))
+				break;
+			RS5C313_MISCOP;
+		}
+
+		memset(&tm, 0, sizeof(struct rtc_time));
+		tm.tm_mday	= 1;
+		tm.tm_mon	= 1 - 1;
+		tm.tm_year	= 2000 - 1900;
+
+		rs5c313_rtc_set_time(NULL, &tm);
+		pr_err("invalid value, resetting to 1 Jan 2000\n");
+	}
+	RS5C313_CEDISABLE;
+	ndelay(700);		/* CE:L */
+}
+
+static const struct rtc_class_ops rs5c313_rtc_ops = {
+	.read_time = rs5c313_rtc_read_time,
+	.set_time = rs5c313_rtc_set_time,
+};
+
+static int rs5c313_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc = devm_rtc_device_register(&pdev->dev, "rs5c313",
+				&rs5c313_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver rs5c313_rtc_platform_driver = {
+	.driver         = {
+		.name   = DRV_NAME,
+	},
+	.probe	= rs5c313_rtc_probe,
+};
+
+static int __init rs5c313_rtc_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&rs5c313_rtc_platform_driver);
+	if (err)
+		return err;
+
+	rs5c313_init_port();
+	rs5c313_check_xstp_bit();
+
+	return 0;
+}
+
+static void __exit rs5c313_rtc_exit(void)
+{
+	platform_driver_unregister(&rs5c313_rtc_platform_driver);
+}
+
+module_init(rs5c313_rtc_init);
+module_exit(rs5c313_rtc_exit);
+
+MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
+MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c348.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c348.c
new file mode 100644
index 0000000..9a30698
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c348.c
@@ -0,0 +1,230 @@
+/*
+ * A SPI driver for the Ricoh RS5C348 RTC
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The board specific init code should provide characteristics of this
+ * device:
+ *     Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS
+ */
+
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#define RS5C348_REG_SECS	0
+#define RS5C348_REG_MINS	1
+#define RS5C348_REG_HOURS	2
+#define RS5C348_REG_WDAY	3
+#define RS5C348_REG_DAY	4
+#define RS5C348_REG_MONTH	5
+#define RS5C348_REG_YEAR	6
+#define RS5C348_REG_CTL1	14
+#define RS5C348_REG_CTL2	15
+
+#define RS5C348_SECS_MASK	0x7f
+#define RS5C348_MINS_MASK	0x7f
+#define RS5C348_HOURS_MASK	0x3f
+#define RS5C348_WDAY_MASK	0x03
+#define RS5C348_DAY_MASK	0x3f
+#define RS5C348_MONTH_MASK	0x1f
+
+#define RS5C348_BIT_PM	0x20	/* REG_HOURS */
+#define RS5C348_BIT_Y2K	0x80	/* REG_MONTH */
+#define RS5C348_BIT_24H	0x20	/* REG_CTL1 */
+#define RS5C348_BIT_XSTP	0x10	/* REG_CTL2 */
+#define RS5C348_BIT_VDET	0x40	/* REG_CTL2 */
+
+#define RS5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */
+#define RS5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */
+#define RS5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */
+#define RS5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */
+
+struct rs5c348_plat_data {
+	struct rtc_device *rtc;
+	int rtc_24h;
+};
+
+static int
+rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
+	u8 txbuf[5+7], *txp;
+	int ret;
+
+	/* Transfer 5 bytes before writing SEC.  This gives 31us for carry. */
+	txp = txbuf;
+	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
+	txbuf[1] = 0;	/* dummy */
+	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
+	txbuf[3] = 0;	/* dummy */
+	txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS); /* cmd, sec, ... */
+	txp = &txbuf[5];
+	txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec);
+	txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min);
+	if (pdata->rtc_24h) {
+		txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour);
+	} else {
+		/* hour 0 is AM12, noon is PM12 */
+		txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) |
+			(tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0);
+	}
+	txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday);
+	txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday);
+	txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) |
+		(tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0);
+	txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100);
+	/* write in one transfer to avoid data inconsistency */
+	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0);
+	udelay(62);	/* Tcsr 62us */
+	return ret;
+}
+
+static int
+rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
+	u8 txbuf[5], rxbuf[7];
+	int ret;
+
+	/* Transfer 5 byte befores reading SEC.  This gives 31us for carry. */
+	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
+	txbuf[1] = 0;	/* dummy */
+	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
+	txbuf[3] = 0;	/* dummy */
+	txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS); /* cmd, sec, ... */
+
+	/* read in one transfer to avoid data inconsistency */
+	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
+				  rxbuf, sizeof(rxbuf));
+	udelay(62);	/* Tcsr 62us */
+	if (ret < 0)
+		return ret;
+
+	tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK);
+	tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
+	tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
+	if (!pdata->rtc_24h) {
+		if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) {
+			tm->tm_hour -= 20;
+			tm->tm_hour %= 12;
+			tm->tm_hour += 12;
+		} else
+			tm->tm_hour %= 12;
+	}
+	tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
+	tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);
+	tm->tm_mon =
+		bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1;
+	/* year is 1900 + tm->tm_year */
+	tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) +
+		((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0);
+
+	if (rtc_valid_tm(tm) < 0) {
+		dev_err(&spi->dev, "retrieved date/time is not valid.\n");
+		rtc_time_to_tm(0, tm);
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops rs5c348_rtc_ops = {
+	.read_time	= rs5c348_rtc_read_time,
+	.set_time	= rs5c348_rtc_set_time,
+};
+
+static struct spi_driver rs5c348_driver;
+
+static int rs5c348_probe(struct spi_device *spi)
+{
+	int ret;
+	struct rtc_device *rtc;
+	struct rs5c348_plat_data *pdata;
+
+	pdata = devm_kzalloc(&spi->dev, sizeof(struct rs5c348_plat_data),
+				GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	spi->dev.platform_data = pdata;
+
+	/* Check D7 of SECOND register */
+	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
+	if (ret < 0 || (ret & 0x80)) {
+		dev_err(&spi->dev, "not found.\n");
+		goto kfree_exit;
+	}
+
+	dev_info(&spi->dev, "spiclk %u KHz.\n",
+		 (spi->max_speed_hz + 500) / 1000);
+
+	/* turn RTC on if it was not on */
+	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
+	if (ret < 0)
+		goto kfree_exit;
+	if (ret & (RS5C348_BIT_XSTP | RS5C348_BIT_VDET)) {
+		u8 buf[2];
+		struct rtc_time tm;
+		if (ret & RS5C348_BIT_VDET)
+			dev_warn(&spi->dev, "voltage-low detected.\n");
+		if (ret & RS5C348_BIT_XSTP)
+			dev_warn(&spi->dev, "oscillator-stop detected.\n");
+		rtc_time_to_tm(0, &tm);	/* 1970/1/1 */
+		ret = rs5c348_rtc_set_time(&spi->dev, &tm);
+		if (ret < 0)
+			goto kfree_exit;
+		buf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
+		buf[1] = 0;
+		ret = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
+		if (ret < 0)
+			goto kfree_exit;
+	}
+
+	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
+	if (ret < 0)
+		goto kfree_exit;
+	if (ret & RS5C348_BIT_24H)
+		pdata->rtc_24h = 1;
+
+	rtc = devm_rtc_device_register(&spi->dev, rs5c348_driver.driver.name,
+				  &rs5c348_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc)) {
+		ret = PTR_ERR(rtc);
+		goto kfree_exit;
+	}
+
+	pdata->rtc = rtc;
+
+	return 0;
+ kfree_exit:
+	return ret;
+}
+
+static struct spi_driver rs5c348_driver = {
+	.driver = {
+		.name	= "rtc-rs5c348",
+	},
+	.probe	= rs5c348_probe,
+};
+
+module_spi_driver(rs5c348_driver);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-rs5c348");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c372.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c372.c
new file mode 100644
index 0000000..d4eff8d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rs5c372.c
@@ -0,0 +1,724 @@
+/*
+ * An I2C driver for Ricoh RS5C372, R2025S/D and RV5C38[67] RTCs
+ *
+ * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net>
+ * Copyright (C) 2006 Tower Technologies
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+/*
+ * Ricoh has a family of I2C based RTCs, which differ only slightly from
+ * each other.  Differences center on pinout (e.g. how many interrupts,
+ * output clock, etc) and how the control registers are used.  The '372
+ * is significant only because that's the one this driver first supported.
+ */
+#define RS5C372_REG_SECS	0
+#define RS5C372_REG_MINS	1
+#define RS5C372_REG_HOURS	2
+#define RS5C372_REG_WDAY	3
+#define RS5C372_REG_DAY		4
+#define RS5C372_REG_MONTH	5
+#define RS5C372_REG_YEAR	6
+#define RS5C372_REG_TRIM	7
+#	define RS5C372_TRIM_XSL		0x80
+#	define RS5C372_TRIM_MASK	0x7F
+
+#define RS5C_REG_ALARM_A_MIN	8			/* or ALARM_W */
+#define RS5C_REG_ALARM_A_HOURS	9
+#define RS5C_REG_ALARM_A_WDAY	10
+
+#define RS5C_REG_ALARM_B_MIN	11			/* or ALARM_D */
+#define RS5C_REG_ALARM_B_HOURS	12
+#define RS5C_REG_ALARM_B_WDAY	13			/* (ALARM_B only) */
+
+#define RS5C_REG_CTRL1		14
+#	define RS5C_CTRL1_AALE		(1 << 7)	/* or WALE */
+#	define RS5C_CTRL1_BALE		(1 << 6)	/* or DALE */
+#	define RV5C387_CTRL1_24		(1 << 5)
+#	define RS5C372A_CTRL1_SL1	(1 << 5)
+#	define RS5C_CTRL1_CT_MASK	(7 << 0)
+#	define RS5C_CTRL1_CT0		(0 << 0)	/* no periodic irq */
+#	define RS5C_CTRL1_CT4		(4 << 0)	/* 1 Hz level irq */
+#define RS5C_REG_CTRL2		15
+#	define RS5C372_CTRL2_24		(1 << 5)
+#	define R2025_CTRL2_XST		(1 << 5)
+#	define RS5C_CTRL2_XSTP		(1 << 4)	/* only if !R2025S/D */
+#	define RS5C_CTRL2_CTFG		(1 << 2)
+#	define RS5C_CTRL2_AAFG		(1 << 1)	/* or WAFG */
+#	define RS5C_CTRL2_BAFG		(1 << 0)	/* or DAFG */
+
+
+/* to read (style 1) or write registers starting at R */
+#define RS5C_ADDR(R)		(((R) << 4) | 0)
+
+
+enum rtc_type {
+	rtc_undef = 0,
+	rtc_r2025sd,
+	rtc_r2221tl,
+	rtc_rs5c372a,
+	rtc_rs5c372b,
+	rtc_rv5c386,
+	rtc_rv5c387a,
+};
+
+static const struct i2c_device_id rs5c372_id[] = {
+	{ "r2025sd", rtc_r2025sd },
+	{ "r2221tl", rtc_r2221tl },
+	{ "rs5c372a", rtc_rs5c372a },
+	{ "rs5c372b", rtc_rs5c372b },
+	{ "rv5c386", rtc_rv5c386 },
+	{ "rv5c387a", rtc_rv5c387a },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rs5c372_id);
+
+static const struct of_device_id rs5c372_of_match[] = {
+	{
+		.compatible = "ricoh,r2025sd",
+		.data = (void *)rtc_r2025sd
+	},
+	{
+		.compatible = "ricoh,r2221tl",
+		.data = (void *)rtc_r2221tl
+	},
+	{
+		.compatible = "ricoh,rs5c372a",
+		.data = (void *)rtc_rs5c372a
+	},
+	{
+		.compatible = "ricoh,rs5c372b",
+		.data = (void *)rtc_rs5c372b
+	},
+	{
+		.compatible = "ricoh,rv5c386",
+		.data = (void *)rtc_rv5c386
+	},
+	{
+		.compatible = "ricoh,rv5c387a",
+		.data = (void *)rtc_rv5c387a
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rs5c372_of_match);
+
+/* REVISIT:  this assumes that:
+ *  - we're in the 21st century, so it's safe to ignore the century
+ *    bit for rv5c38[67] (REG_MONTH bit 7);
+ *  - we should use ALARM_A not ALARM_B (may be wrong on some boards)
+ */
+struct rs5c372 {
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+	enum rtc_type		type;
+	unsigned		time24:1;
+	unsigned		has_irq:1;
+	unsigned		smbus:1;
+	char			buf[17];
+	char			*regs;
+};
+
+static int rs5c_get_regs(struct rs5c372 *rs5c)
+{
+	struct i2c_client	*client = rs5c->client;
+	struct i2c_msg		msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(rs5c->buf),
+			.buf = rs5c->buf
+		},
+	};
+
+	/* This implements the third reading method from the datasheet, using
+	 * an internal address that's reset after each transaction (by STOP)
+	 * to 0x0f ... so we read extra registers, and skip the first one.
+	 *
+	 * The first method doesn't work with the iop3xx adapter driver, on at
+	 * least 80219 chips; this works around that bug.
+	 *
+	 * The third method on the other hand doesn't work for the SMBus-only
+	 * configurations, so we use the the first method there, stripping off
+	 * the extra register in the process.
+	 */
+	if (rs5c->smbus) {
+		int addr = RS5C_ADDR(RS5C372_REG_SECS);
+		int size = sizeof(rs5c->buf) - 1;
+
+		if (i2c_smbus_read_i2c_block_data(client, addr, size,
+						  rs5c->buf + 1) != size) {
+			dev_warn(&client->dev, "can't read registers\n");
+			return -EIO;
+		}
+	} else {
+		if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
+			dev_warn(&client->dev, "can't read registers\n");
+			return -EIO;
+		}
+	}
+
+	dev_dbg(&client->dev,
+		"%3ph (%02x) %3ph (%02x), %3ph, %3ph; %02x %02x\n",
+		rs5c->regs + 0, rs5c->regs[3],
+		rs5c->regs + 4, rs5c->regs[7],
+		rs5c->regs + 8, rs5c->regs + 11,
+		rs5c->regs[14], rs5c->regs[15]);
+
+	return 0;
+}
+
+static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg)
+{
+	unsigned	hour;
+
+	if (rs5c->time24)
+		return bcd2bin(reg & 0x3f);
+
+	hour = bcd2bin(reg & 0x1f);
+	if (hour == 12)
+		hour = 0;
+	if (reg & 0x20)
+		hour += 12;
+	return hour;
+}
+
+static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour)
+{
+	if (rs5c->time24)
+		return bin2bcd(hour);
+
+	if (hour > 12)
+		return 0x20 | bin2bcd(hour - 12);
+	if (hour == 12)
+		return 0x20 | bin2bcd(12);
+	if (hour == 0)
+		return bin2bcd(12);
+	return bin2bcd(hour);
+}
+
+static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct rs5c372	*rs5c = i2c_get_clientdata(client);
+	int		status = rs5c_get_regs(rs5c);
+
+	if (status < 0)
+		return status;
+
+	tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
+	tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
+	tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
+
+	tm->tm_wday = bcd2bin(rs5c->regs[RS5C372_REG_WDAY] & 0x07);
+	tm->tm_mday = bcd2bin(rs5c->regs[RS5C372_REG_DAY] & 0x3f);
+
+	/* tm->tm_mon is zero-based */
+	tm->tm_mon = bcd2bin(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1;
+
+	/* year is 1900 + tm->tm_year */
+	tm->tm_year = bcd2bin(rs5c->regs[RS5C372_REG_YEAR]) + 100;
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* rtc might need initialization */
+	return rtc_valid_tm(tm);
+}
+
+static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct rs5c372	*rs5c = i2c_get_clientdata(client);
+	unsigned char	buf[7];
+	int		addr;
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	addr   = RS5C_ADDR(RS5C372_REG_SECS);
+	buf[0] = bin2bcd(tm->tm_sec);
+	buf[1] = bin2bcd(tm->tm_min);
+	buf[2] = rs5c_hr2reg(rs5c, tm->tm_hour);
+	buf[3] = bin2bcd(tm->tm_wday);
+	buf[4] = bin2bcd(tm->tm_mday);
+	buf[5] = bin2bcd(tm->tm_mon + 1);
+	buf[6] = bin2bcd(tm->tm_year - 100);
+
+	if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
+#define	NEED_TRIM
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
+#define	NEED_TRIM
+#endif
+
+#ifdef	NEED_TRIM
+static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim)
+{
+	struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
+	u8 tmp = rs5c372->regs[RS5C372_REG_TRIM];
+
+	if (osc)
+		*osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768;
+
+	if (trim) {
+		dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp);
+		tmp &= RS5C372_TRIM_MASK;
+		if (tmp & 0x3e) {
+			int t = tmp & 0x3f;
+
+			if (tmp & 0x40)
+				t = (~t | (s8)0xc0) + 1;
+			else
+				t = t - 1;
+
+			tmp = t * 2;
+		} else
+			tmp = 0;
+		*trim = tmp;
+	}
+
+	return 0;
+}
+#endif
+
+static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return rs5c372_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return rs5c372_set_datetime(to_i2c_client(dev), tm);
+}
+
+
+static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client	*client = to_i2c_client(dev);
+	struct rs5c372		*rs5c = i2c_get_clientdata(client);
+	unsigned char		buf;
+	int			status, addr;
+
+	buf = rs5c->regs[RS5C_REG_CTRL1];
+
+	if (!rs5c->has_irq)
+		return -EINVAL;
+
+	status = rs5c_get_regs(rs5c);
+	if (status < 0)
+		return status;
+
+	addr = RS5C_ADDR(RS5C_REG_CTRL1);
+	if (enabled)
+		buf |= RS5C_CTRL1_AALE;
+	else
+		buf &= ~RS5C_CTRL1_AALE;
+
+	if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
+		dev_warn(dev, "can't update alarm\n");
+		status = -EIO;
+	} else
+		rs5c->regs[RS5C_REG_CTRL1] = buf;
+
+	return status;
+}
+
+
+/* NOTE:  Since RTC_WKALM_{RD,SET} were originally defined for EFI,
+ * which only exposes a polled programming interface; and since
+ * these calls map directly to those EFI requests; we don't demand
+ * we have an IRQ for this chip when we go through this API.
+ *
+ * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs
+ * though, managed through RTC_AIE_{ON,OFF} requests.
+ */
+
+static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client	*client = to_i2c_client(dev);
+	struct rs5c372		*rs5c = i2c_get_clientdata(client);
+	int			status;
+
+	status = rs5c_get_regs(rs5c);
+	if (status < 0)
+		return status;
+
+	/* report alarm time */
+	t->time.tm_sec = 0;
+	t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
+	t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
+
+	/* ... and status */
+	t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
+	t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG);
+
+	return 0;
+}
+
+static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client	*client = to_i2c_client(dev);
+	struct rs5c372		*rs5c = i2c_get_clientdata(client);
+	int			status, addr, i;
+	unsigned char		buf[3];
+
+	/* only handle up to 24 hours in the future, like RTC_ALM_SET */
+	if (t->time.tm_mday != -1
+			|| t->time.tm_mon != -1
+			|| t->time.tm_year != -1)
+		return -EINVAL;
+
+	/* REVISIT: round up tm_sec */
+
+	/* if needed, disable irq (clears pending status) */
+	status = rs5c_get_regs(rs5c);
+	if (status < 0)
+		return status;
+	if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
+		addr = RS5C_ADDR(RS5C_REG_CTRL1);
+		buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
+		if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) {
+			dev_dbg(dev, "can't disable alarm\n");
+			return -EIO;
+		}
+		rs5c->regs[RS5C_REG_CTRL1] = buf[0];
+	}
+
+	/* set alarm */
+	buf[0] = bin2bcd(t->time.tm_min);
+	buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
+	buf[2] = 0x7f;	/* any/all days */
+
+	for (i = 0; i < sizeof(buf); i++) {
+		addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
+		if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) {
+			dev_dbg(dev, "can't set alarm time\n");
+			return -EIO;
+		}
+	}
+
+	/* ... and maybe enable its irq */
+	if (t->enabled) {
+		addr = RS5C_ADDR(RS5C_REG_CTRL1);
+		buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
+		if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0)
+			dev_warn(dev, "can't enable alarm\n");
+		rs5c->regs[RS5C_REG_CTRL1] = buf[0];
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
+
+static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	int err, osc, trim;
+
+	err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
+	if (err == 0) {
+		seq_printf(seq, "crystal\t\t: %d.%03d KHz\n",
+				osc / 1000, osc % 1000);
+		seq_printf(seq, "trim\t\t: %d\n", trim);
+	}
+
+	return 0;
+}
+
+#else
+#define	rs5c372_rtc_proc	NULL
+#endif
+
+static const struct rtc_class_ops rs5c372_rtc_ops = {
+	.proc		= rs5c372_rtc_proc,
+	.read_time	= rs5c372_rtc_read_time,
+	.set_time	= rs5c372_rtc_set_time,
+	.read_alarm	= rs5c_read_alarm,
+	.set_alarm	= rs5c_set_alarm,
+	.alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
+};
+
+#if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
+
+static ssize_t rs5c372_sysfs_show_trim(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int err, trim;
+
+	err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d\n", trim);
+}
+static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL);
+
+static ssize_t rs5c372_sysfs_show_osc(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int err, osc;
+
+	err = rs5c372_get_trim(to_i2c_client(dev), &osc, NULL);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000);
+}
+static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL);
+
+static int rs5c_sysfs_register(struct device *dev)
+{
+	int err;
+
+	err = device_create_file(dev, &dev_attr_trim);
+	if (err)
+		return err;
+	err = device_create_file(dev, &dev_attr_osc);
+	if (err)
+		device_remove_file(dev, &dev_attr_trim);
+
+	return err;
+}
+
+static void rs5c_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_trim);
+	device_remove_file(dev, &dev_attr_osc);
+}
+
+#else
+static int rs5c_sysfs_register(struct device *dev)
+{
+	return 0;
+}
+
+static void rs5c_sysfs_unregister(struct device *dev)
+{
+	/* nothing */
+}
+#endif	/* SYSFS */
+
+static struct i2c_driver rs5c372_driver;
+
+static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
+{
+	unsigned char buf[2];
+	int addr, i, ret = 0;
+
+	if (rs5c372->type == rtc_r2025sd) {
+		if (rs5c372->regs[RS5C_REG_CTRL2] & R2025_CTRL2_XST)
+			return ret;
+		rs5c372->regs[RS5C_REG_CTRL2] |= R2025_CTRL2_XST;
+	} else {
+		if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP))
+			return ret;
+		rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
+	}
+
+	addr   = RS5C_ADDR(RS5C_REG_CTRL1);
+	buf[0] = rs5c372->regs[RS5C_REG_CTRL1];
+	buf[1] = rs5c372->regs[RS5C_REG_CTRL2];
+
+	/* use 24hr mode */
+	switch (rs5c372->type) {
+	case rtc_rs5c372a:
+	case rtc_rs5c372b:
+		buf[1] |= RS5C372_CTRL2_24;
+		rs5c372->time24 = 1;
+		break;
+	case rtc_r2025sd:
+	case rtc_r2221tl:
+	case rtc_rv5c386:
+	case rtc_rv5c387a:
+		buf[0] |= RV5C387_CTRL1_24;
+		rs5c372->time24 = 1;
+		break;
+	default:
+		/* impossible */
+		break;
+	}
+
+	for (i = 0; i < sizeof(buf); i++) {
+		addr = RS5C_ADDR(RS5C_REG_CTRL1 + i);
+		ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]);
+		if (unlikely(ret < 0))
+			return ret;
+	}
+
+	rs5c372->regs[RS5C_REG_CTRL1] = buf[0];
+	rs5c372->regs[RS5C_REG_CTRL2] = buf[1];
+
+	return 0;
+}
+
+static int rs5c372_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	int err = 0;
+	int smbus_mode = 0;
+	struct rs5c372 *rs5c372;
+	struct rtc_time tm;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		/*
+		 * If we don't have any master mode adapter, try breaking
+		 * it down in to the barest of capabilities.
+		 */
+		if (i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA |
+				I2C_FUNC_SMBUS_I2C_BLOCK))
+			smbus_mode = 1;
+		else {
+			/* Still no good, give up */
+			err = -ENODEV;
+			goto exit;
+		}
+	}
+
+	rs5c372 = devm_kzalloc(&client->dev, sizeof(struct rs5c372),
+				GFP_KERNEL);
+	if (!rs5c372) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	rs5c372->client = client;
+	i2c_set_clientdata(client, rs5c372);
+	if (client->dev.of_node)
+		rs5c372->type = (enum rtc_type)
+			of_device_get_match_data(&client->dev);
+	else
+		rs5c372->type = id->driver_data;
+
+	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
+	rs5c372->regs = &rs5c372->buf[1];
+	rs5c372->smbus = smbus_mode;
+
+	err = rs5c_get_regs(rs5c372);
+	if (err < 0)
+		goto exit;
+
+	/* clock may be set for am/pm or 24 hr time */
+	switch (rs5c372->type) {
+	case rtc_rs5c372a:
+	case rtc_rs5c372b:
+		/* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
+		 * so does periodic irq, except some 327a modes.
+		 */
+		if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
+			rs5c372->time24 = 1;
+		break;
+	case rtc_r2025sd:
+	case rtc_r2221tl:
+	case rtc_rv5c386:
+	case rtc_rv5c387a:
+		if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
+			rs5c372->time24 = 1;
+		/* alarm uses ALARM_W; and nINTRB for alarm and periodic
+		 * irq, on both 386 and 387
+		 */
+		break;
+	default:
+		dev_err(&client->dev, "unknown RTC type\n");
+		goto exit;
+	}
+
+	/* if the oscillator lost power and no other software (like
+	 * the bootloader) set it up, do it here.
+	 *
+	 * The R2025S/D does this a little differently than the other
+	 * parts, so we special case that..
+	 */
+	err = rs5c_oscillator_setup(rs5c372);
+	if (unlikely(err < 0)) {
+		dev_err(&client->dev, "setup error\n");
+		goto exit;
+	}
+
+	if (rs5c372_get_datetime(client, &tm) < 0)
+		dev_warn(&client->dev, "clock needs to be set\n");
+
+	dev_info(&client->dev, "%s found, %s\n",
+			({ char *s; switch (rs5c372->type) {
+			case rtc_r2025sd:	s = "r2025sd"; break;
+			case rtc_r2221tl:	s = "r2221tl"; break;
+			case rtc_rs5c372a:	s = "rs5c372a"; break;
+			case rtc_rs5c372b:	s = "rs5c372b"; break;
+			case rtc_rv5c386:	s = "rv5c386"; break;
+			case rtc_rv5c387a:	s = "rv5c387a"; break;
+			default:		s = "chip"; break;
+			}; s;}),
+			rs5c372->time24 ? "24hr" : "am/pm"
+			);
+
+	/* REVISIT use client->irq to register alarm irq ... */
+	rs5c372->rtc = devm_rtc_device_register(&client->dev,
+					rs5c372_driver.driver.name,
+					&rs5c372_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rs5c372->rtc)) {
+		err = PTR_ERR(rs5c372->rtc);
+		goto exit;
+	}
+
+	err = rs5c_sysfs_register(&client->dev);
+	if (err)
+		goto exit;
+
+	return 0;
+
+exit:
+	return err;
+}
+
+static int rs5c372_remove(struct i2c_client *client)
+{
+	rs5c_sysfs_unregister(&client->dev);
+	return 0;
+}
+
+static struct i2c_driver rs5c372_driver = {
+	.driver		= {
+		.name	= "rtc-rs5c372",
+		.of_match_table = of_match_ptr(rs5c372_of_match),
+	},
+	.probe		= rs5c372_probe,
+	.remove		= rs5c372_remove,
+	.id_table	= rs5c372_id,
+};
+
+module_i2c_driver(rs5c372_driver);
+
+MODULE_AUTHOR(
+		"Pavel Mironchik <pmironchik@optifacio.net>, "
+		"Alessandro Zummo <a.zummo@towertech.it>, "
+		"Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("Ricoh RS5C372 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rtd119x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rtd119x.c
new file mode 100644
index 0000000..b233559
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rtd119x.c
@@ -0,0 +1,242 @@
+/*
+ * Realtek RTD129x RTC
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+
+#define RTD_RTCSEC		0x00
+#define RTD_RTCMIN		0x04
+#define RTD_RTCHR		0x08
+#define RTD_RTCDATE1		0x0c
+#define RTD_RTCDATE2		0x10
+#define RTD_RTCACR		0x28
+#define RTD_RTCEN		0x2c
+#define RTD_RTCCR		0x30
+
+#define RTD_RTCSEC_RTCSEC_MASK		0x7f
+
+#define RTD_RTCMIN_RTCMIN_MASK		0x3f
+
+#define RTD_RTCHR_RTCHR_MASK		0x1f
+
+#define RTD_RTCDATE1_RTCDATE1_MASK	0xff
+
+#define RTD_RTCDATE2_RTCDATE2_MASK	0x7f
+
+#define RTD_RTCACR_RTCPWR		BIT(7)
+
+#define RTD_RTCEN_RTCEN_MASK		0xff
+
+#define RTD_RTCCR_RTCRST		BIT(6)
+
+struct rtd119x_rtc {
+	void __iomem *base;
+	struct clk *clk;
+	struct rtc_device *rtcdev;
+	unsigned int base_year;
+};
+
+static inline int rtd119x_rtc_days_in_year(int year)
+{
+	return 365 + (is_leap_year(year) ? 1 : 0);
+}
+
+static void rtd119x_rtc_reset(struct device *dev)
+{
+	struct rtd119x_rtc *data = dev_get_drvdata(dev);
+	u32 val;
+
+	val = readl_relaxed(data->base + RTD_RTCCR);
+	val |= RTD_RTCCR_RTCRST;
+	writel_relaxed(val, data->base + RTD_RTCCR);
+
+	val &= ~RTD_RTCCR_RTCRST;
+	writel(val, data->base + RTD_RTCCR);
+}
+
+static void rtd119x_rtc_set_enabled(struct device *dev, bool enable)
+{
+	struct rtd119x_rtc *data = dev_get_drvdata(dev);
+	u32 val;
+
+	val = readl_relaxed(data->base + RTD_RTCEN);
+	if (enable) {
+		if ((val & RTD_RTCEN_RTCEN_MASK) == 0x5a)
+			return;
+		writel_relaxed(0x5a, data->base + RTD_RTCEN);
+	} else {
+		writel_relaxed(0, data->base + RTD_RTCEN);
+	}
+}
+
+static int rtd119x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtd119x_rtc *data = dev_get_drvdata(dev);
+	s32 day;
+	u32 sec;
+	unsigned int year;
+	int tries = 0;
+
+	while (true) {
+		tm->tm_sec = (readl_relaxed(data->base + RTD_RTCSEC) & RTD_RTCSEC_RTCSEC_MASK) >> 1;
+		tm->tm_min  = readl_relaxed(data->base + RTD_RTCMIN) & RTD_RTCMIN_RTCMIN_MASK;
+		tm->tm_hour = readl_relaxed(data->base + RTD_RTCHR) & RTD_RTCHR_RTCHR_MASK;
+		day  =  readl_relaxed(data->base + RTD_RTCDATE1) & RTD_RTCDATE1_RTCDATE1_MASK;
+		day |= (readl_relaxed(data->base + RTD_RTCDATE2) & RTD_RTCDATE2_RTCDATE2_MASK) << 8;
+		sec  = (readl_relaxed(data->base + RTD_RTCSEC) & RTD_RTCSEC_RTCSEC_MASK) >> 1;
+		tries++;
+
+		if (sec == tm->tm_sec)
+			break;
+
+		if (tries >= 3)
+			return -EINVAL;
+	}
+	if (tries > 1)
+		dev_dbg(dev, "%s: needed %i tries\n", __func__, tries);
+
+	year = data->base_year;
+	while (day >= rtd119x_rtc_days_in_year(year)) {
+		day -= rtd119x_rtc_days_in_year(year);
+		year++;
+	}
+	tm->tm_year = year - 1900;
+	tm->tm_yday = day;
+
+	tm->tm_mon = 0;
+	while (day >= rtc_month_days(tm->tm_mon, year)) {
+		day -= rtc_month_days(tm->tm_mon, year);
+		tm->tm_mon++;
+	}
+	tm->tm_mday = day + 1;
+
+	return 0;
+}
+
+static int rtd119x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtd119x_rtc *data = dev_get_drvdata(dev);
+	unsigned int day;
+	int i;
+
+	if (1900 + tm->tm_year < data->base_year)
+		return -EINVAL;
+
+	day = 0;
+	for (i = data->base_year; i < 1900 + tm->tm_year; i++)
+		day += rtd119x_rtc_days_in_year(i);
+
+	day += tm->tm_yday;
+	if (day > 0x7fff)
+		return -EINVAL;
+
+	rtd119x_rtc_set_enabled(dev, false);
+
+	writel_relaxed((tm->tm_sec << 1) & RTD_RTCSEC_RTCSEC_MASK, data->base + RTD_RTCSEC);
+	writel_relaxed(tm->tm_min & RTD_RTCMIN_RTCMIN_MASK, data->base + RTD_RTCMIN);
+	writel_relaxed(tm->tm_hour & RTD_RTCHR_RTCHR_MASK, data->base + RTD_RTCHR);
+	writel_relaxed(day & RTD_RTCDATE1_RTCDATE1_MASK, data->base + RTD_RTCDATE1);
+	writel_relaxed((day >> 8) & RTD_RTCDATE2_RTCDATE2_MASK, data->base + RTD_RTCDATE2);
+
+	rtd119x_rtc_set_enabled(dev, true);
+
+	return 0;
+}
+
+static const struct rtc_class_ops rtd119x_rtc_ops = {
+	.read_time	= rtd119x_rtc_read_time,
+	.set_time	= rtd119x_rtc_set_time,
+};
+
+static const struct of_device_id rtd119x_rtc_dt_ids[] = {
+	 { .compatible = "realtek,rtd1295-rtc" },
+	 { }
+};
+
+static int rtd119x_rtc_probe(struct platform_device *pdev)
+{
+	struct rtd119x_rtc *data;
+	struct resource *res;
+	u32 val;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+	data->base_year = 2014;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		clk_put(data->clk);
+		return ret;
+	}
+
+	val = readl_relaxed(data->base + RTD_RTCACR);
+	if (!(val & RTD_RTCACR_RTCPWR)) {
+		writel_relaxed(RTD_RTCACR_RTCPWR, data->base + RTD_RTCACR);
+
+		rtd119x_rtc_reset(&pdev->dev);
+
+		writel_relaxed(0, data->base + RTD_RTCMIN);
+		writel_relaxed(0, data->base + RTD_RTCHR);
+		writel_relaxed(0, data->base + RTD_RTCDATE1);
+		writel_relaxed(0, data->base + RTD_RTCDATE2);
+	}
+
+	rtd119x_rtc_set_enabled(&pdev->dev, true);
+
+	data->rtcdev = devm_rtc_device_register(&pdev->dev, "rtc",
+						&rtd119x_rtc_ops, THIS_MODULE);
+	if (IS_ERR(data->rtcdev)) {
+		dev_err(&pdev->dev, "failed to register rtc device");
+		clk_disable_unprepare(data->clk);
+		clk_put(data->clk);
+		return PTR_ERR(data->rtcdev);
+	}
+
+	return 0;
+}
+
+static int rtd119x_rtc_remove(struct platform_device *pdev)
+{
+	struct rtd119x_rtc *data = platform_get_drvdata(pdev);
+
+	rtd119x_rtc_set_enabled(&pdev->dev, false);
+
+	clk_disable_unprepare(data->clk);
+	clk_put(data->clk);
+
+	return 0;
+}
+
+static struct platform_driver rtd119x_rtc_driver = {
+	.probe = rtd119x_rtc_probe,
+	.remove = rtd119x_rtc_remove,
+	.driver = {
+		.name = "rtd1295-rtc",
+		.of_match_table	= rtd119x_rtc_dt_ids,
+	},
+};
+builtin_platform_driver(rtd119x_rtc_driver);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rv3029c2.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rv3029c2.c
new file mode 100644
index 0000000..aa09771
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rv3029c2.c
@@ -0,0 +1,999 @@
+/*
+ * Micro Crystal RV-3029 / RV-3049 rtc class driver
+ *
+ * Author: Gregory Hermant <gregory.hermant@calao-systems.com>
+ *         Michael Buesch <m@bues.ch>
+ *
+ * based on previously existing rtc class drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/regmap.h>
+
+/* Register map */
+/* control section */
+#define RV3029_ONOFF_CTRL		0x00
+#define RV3029_ONOFF_CTRL_WE		BIT(0)
+#define RV3029_ONOFF_CTRL_TE		BIT(1)
+#define RV3029_ONOFF_CTRL_TAR		BIT(2)
+#define RV3029_ONOFF_CTRL_EERE		BIT(3)
+#define RV3029_ONOFF_CTRL_SRON		BIT(4)
+#define RV3029_ONOFF_CTRL_TD0		BIT(5)
+#define RV3029_ONOFF_CTRL_TD1		BIT(6)
+#define RV3029_ONOFF_CTRL_CLKINT	BIT(7)
+#define RV3029_IRQ_CTRL			0x01
+#define RV3029_IRQ_CTRL_AIE		BIT(0)
+#define RV3029_IRQ_CTRL_TIE		BIT(1)
+#define RV3029_IRQ_CTRL_V1IE		BIT(2)
+#define RV3029_IRQ_CTRL_V2IE		BIT(3)
+#define RV3029_IRQ_CTRL_SRIE		BIT(4)
+#define RV3029_IRQ_FLAGS		0x02
+#define RV3029_IRQ_FLAGS_AF		BIT(0)
+#define RV3029_IRQ_FLAGS_TF		BIT(1)
+#define RV3029_IRQ_FLAGS_V1IF		BIT(2)
+#define RV3029_IRQ_FLAGS_V2IF		BIT(3)
+#define RV3029_IRQ_FLAGS_SRF		BIT(4)
+#define RV3029_STATUS			0x03
+#define RV3029_STATUS_VLOW1		BIT(2)
+#define RV3029_STATUS_VLOW2		BIT(3)
+#define RV3029_STATUS_SR		BIT(4)
+#define RV3029_STATUS_PON		BIT(5)
+#define RV3029_STATUS_EEBUSY		BIT(7)
+#define RV3029_RST_CTRL			0x04
+#define RV3029_RST_CTRL_SYSR		BIT(4)
+#define RV3029_CONTROL_SECTION_LEN	0x05
+
+/* watch section */
+#define RV3029_W_SEC			0x08
+#define RV3029_W_MINUTES		0x09
+#define RV3029_W_HOURS			0x0A
+#define RV3029_REG_HR_12_24		BIT(6) /* 24h/12h mode */
+#define RV3029_REG_HR_PM		BIT(5) /* PM/AM bit in 12h mode */
+#define RV3029_W_DATE			0x0B
+#define RV3029_W_DAYS			0x0C
+#define RV3029_W_MONTHS			0x0D
+#define RV3029_W_YEARS			0x0E
+#define RV3029_WATCH_SECTION_LEN	0x07
+
+/* alarm section */
+#define RV3029_A_SC			0x10
+#define RV3029_A_MN			0x11
+#define RV3029_A_HR			0x12
+#define RV3029_A_DT			0x13
+#define RV3029_A_DW			0x14
+#define RV3029_A_MO			0x15
+#define RV3029_A_YR			0x16
+#define RV3029_A_AE_X			BIT(7)
+#define RV3029_ALARM_SECTION_LEN	0x07
+
+/* timer section */
+#define RV3029_TIMER_LOW		0x18
+#define RV3029_TIMER_HIGH		0x19
+
+/* temperature section */
+#define RV3029_TEMP_PAGE		0x20
+
+/* eeprom data section */
+#define RV3029_E2P_EEDATA1		0x28
+#define RV3029_E2P_EEDATA2		0x29
+#define RV3029_E2PDATA_SECTION_LEN	0x02
+
+/* eeprom control section */
+#define RV3029_CONTROL_E2P_EECTRL	0x30
+#define RV3029_EECTRL_THP		BIT(0) /* temp scan interval */
+#define RV3029_EECTRL_THE		BIT(1) /* thermometer enable */
+#define RV3029_EECTRL_FD0		BIT(2) /* CLKOUT */
+#define RV3029_EECTRL_FD1		BIT(3) /* CLKOUT */
+#define RV3029_TRICKLE_1K		BIT(4) /* 1.5K resistance */
+#define RV3029_TRICKLE_5K		BIT(5) /* 5K   resistance */
+#define RV3029_TRICKLE_20K		BIT(6) /* 20K  resistance */
+#define RV3029_TRICKLE_80K		BIT(7) /* 80K  resistance */
+#define RV3029_TRICKLE_MASK		(RV3029_TRICKLE_1K |\
+					 RV3029_TRICKLE_5K |\
+					 RV3029_TRICKLE_20K |\
+					 RV3029_TRICKLE_80K)
+#define RV3029_TRICKLE_SHIFT		4
+#define RV3029_CONTROL_E2P_XOFFS	0x31 /* XTAL offset */
+#define RV3029_CONTROL_E2P_XOFFS_SIGN	BIT(7) /* Sign: 1->pos, 0->neg */
+#define RV3029_CONTROL_E2P_QCOEF	0x32 /* XTAL temp drift coef */
+#define RV3029_CONTROL_E2P_TURNOVER	0x33 /* XTAL turnover temp (in *C) */
+#define RV3029_CONTROL_E2P_TOV_MASK	0x3F /* XTAL turnover temp mask */
+
+/* user ram section */
+#define RV3029_USR1_RAM_PAGE		0x38
+#define RV3029_USR1_SECTION_LEN		0x04
+#define RV3029_USR2_RAM_PAGE		0x3C
+#define RV3029_USR2_SECTION_LEN		0x04
+
+struct rv3029_data {
+	struct device		*dev;
+	struct rtc_device	*rtc;
+	struct regmap		*regmap;
+	int irq;
+};
+
+static int rv3029_read_regs(struct device *dev, u8 reg, u8 *buf,
+			    unsigned int len)
+{
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+
+	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
+	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
+		return -EINVAL;
+
+	return regmap_bulk_read(rv3029->regmap, reg, buf, len);
+}
+
+static int rv3029_write_regs(struct device *dev, u8 reg, u8 const buf[],
+			     unsigned int len)
+{
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+
+	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
+	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
+		return -EINVAL;
+
+	return regmap_bulk_write(rv3029->regmap, reg, buf, len);
+}
+
+static int rv3029_update_bits(struct device *dev, u8 reg, u8 mask, u8 set)
+{
+	u8 buf;
+	int ret;
+
+	ret = rv3029_read_regs(dev, reg, &buf, 1);
+	if (ret < 0)
+		return ret;
+	buf &= ~mask;
+	buf |= set & mask;
+	ret = rv3029_write_regs(dev, reg, &buf, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rv3029_get_sr(struct device *dev, u8 *buf)
+{
+	int ret = rv3029_read_regs(dev, RV3029_STATUS, buf, 1);
+
+	if (ret < 0)
+		return -EIO;
+	dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
+	return 0;
+}
+
+static int rv3029_set_sr(struct device *dev, u8 val)
+{
+	u8 buf[1];
+	int sr;
+
+	buf[0] = val;
+	sr = rv3029_write_regs(dev, RV3029_STATUS, buf, 1);
+	dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
+	if (sr < 0)
+		return -EIO;
+	return 0;
+}
+
+static int rv3029_eeprom_busywait(struct device *dev)
+{
+	int i, ret;
+	u8 sr;
+
+	for (i = 100; i > 0; i--) {
+		ret = rv3029_get_sr(dev, &sr);
+		if (ret < 0)
+			break;
+		if (!(sr & RV3029_STATUS_EEBUSY))
+			break;
+		usleep_range(1000, 10000);
+	}
+	if (i <= 0) {
+		dev_err(dev, "EEPROM busy wait timeout.\n");
+		return -ETIMEDOUT;
+	}
+
+	return ret;
+}
+
+static int rv3029_eeprom_exit(struct device *dev)
+{
+	/* Re-enable eeprom refresh */
+	return rv3029_update_bits(dev, RV3029_ONOFF_CTRL,
+				  RV3029_ONOFF_CTRL_EERE,
+				  RV3029_ONOFF_CTRL_EERE);
+}
+
+static int rv3029_eeprom_enter(struct device *dev)
+{
+	int ret;
+	u8 sr;
+
+	/* Check whether we are in the allowed voltage range. */
+	ret = rv3029_get_sr(dev, &sr);
+	if (ret < 0)
+		return ret;
+	if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+		/* We clear the bits and retry once just in case
+		 * we had a brown out in early startup.
+		 */
+		sr &= ~RV3029_STATUS_VLOW1;
+		sr &= ~RV3029_STATUS_VLOW2;
+		ret = rv3029_set_sr(dev, sr);
+		if (ret < 0)
+			return ret;
+		usleep_range(1000, 10000);
+		ret = rv3029_get_sr(dev, &sr);
+		if (ret < 0)
+			return ret;
+		if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+			dev_err(dev,
+				"Supply voltage is too low to safely access the EEPROM.\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Disable eeprom refresh. */
+	ret = rv3029_update_bits(dev, RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE,
+				 0);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for any previous eeprom accesses to finish. */
+	ret = rv3029_eeprom_busywait(dev);
+	if (ret < 0)
+		rv3029_eeprom_exit(dev);
+
+	return ret;
+}
+
+static int rv3029_eeprom_read(struct device *dev, u8 reg,
+			      u8 buf[], size_t len)
+{
+	int ret, err;
+
+	err = rv3029_eeprom_enter(dev);
+	if (err < 0)
+		return err;
+
+	ret = rv3029_read_regs(dev, reg, buf, len);
+
+	err = rv3029_eeprom_exit(dev);
+	if (err < 0)
+		return err;
+
+	return ret;
+}
+
+static int rv3029_eeprom_write(struct device *dev, u8 reg,
+			       u8 const buf[], size_t len)
+{
+	int ret, err;
+	size_t i;
+	u8 tmp;
+
+	err = rv3029_eeprom_enter(dev);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < len; i++, reg++) {
+		ret = rv3029_read_regs(dev, reg, &tmp, 1);
+		if (ret < 0)
+			break;
+		if (tmp != buf[i]) {
+			ret = rv3029_write_regs(dev, reg, &buf[i], 1);
+			if (ret < 0)
+				break;
+		}
+		ret = rv3029_eeprom_busywait(dev);
+		if (ret < 0)
+			break;
+	}
+
+	err = rv3029_eeprom_exit(dev);
+	if (err < 0)
+		return err;
+
+	return ret;
+}
+
+static int rv3029_eeprom_update_bits(struct device *dev,
+				     u8 reg, u8 mask, u8 set)
+{
+	u8 buf;
+	int ret;
+
+	ret = rv3029_eeprom_read(dev, reg, &buf, 1);
+	if (ret < 0)
+		return ret;
+	buf &= ~mask;
+	buf |= set & mask;
+	ret = rv3029_eeprom_write(dev, reg, &buf, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+	struct mutex *lock = &rv3029->rtc->ops_lock;
+	unsigned long events = 0;
+	u8 flags, controls;
+	int ret;
+
+	mutex_lock(lock);
+
+	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	if (ret) {
+		dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
+		mutex_unlock(lock);
+		return IRQ_NONE;
+	}
+
+	ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
+	if (ret) {
+		dev_warn(dev, "Read IRQ Flags Register error %d\n", ret);
+		mutex_unlock(lock);
+		return IRQ_NONE;
+	}
+
+	if (flags & RV3029_IRQ_FLAGS_AF) {
+		flags &= ~RV3029_IRQ_FLAGS_AF;
+		controls &= ~RV3029_IRQ_CTRL_AIE;
+		events |= RTC_AF;
+	}
+
+	if (events) {
+		rtc_update_irq(rv3029->rtc, 1, events);
+		rv3029_write_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
+		rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	}
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 buf[1];
+	int ret;
+	u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };
+
+	ret = rv3029_get_sr(dev, buf);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	ret = rv3029_read_regs(dev, RV3029_W_SEC, regs,
+			       RV3029_WATCH_SECTION_LEN);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading RTC section failed\n", __func__);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
+	tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
+
+	/* HR field has a more complex interpretation */
+	{
+		const u8 _hr = regs[RV3029_W_HOURS - RV3029_W_SEC];
+
+		if (_hr & RV3029_REG_HR_12_24) {
+			/* 12h format */
+			tm->tm_hour = bcd2bin(_hr & 0x1f);
+			if (_hr & RV3029_REG_HR_PM)	/* PM flag set */
+				tm->tm_hour += 12;
+		} else /* 24h format */
+			tm->tm_hour = bcd2bin(_hr & 0x3f);
+	}
+
+	tm->tm_mday = bcd2bin(regs[RV3029_W_DATE - RV3029_W_SEC]);
+	tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS - RV3029_W_SEC]) - 1;
+	tm->tm_year = bcd2bin(regs[RV3029_W_YEARS - RV3029_W_SEC]) + 100;
+	tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS - RV3029_W_SEC]) - 1;
+
+	return 0;
+}
+
+static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *const tm = &alarm->time;
+	int ret;
+	u8 regs[8], controls, flags;
+
+	ret = rv3029_get_sr(dev, regs);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	ret = rv3029_read_regs(dev, RV3029_A_SC, regs,
+			       RV3029_ALARM_SECTION_LEN);
+
+	if (ret < 0) {
+		dev_err(dev, "%s: reading alarm section failed\n", __func__);
+		return ret;
+	}
+
+	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	if (ret) {
+		dev_err(dev, "Read IRQ Control Register error %d\n", ret);
+		return ret;
+	}
+	ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1);
+	if (ret < 0) {
+		dev_err(dev, "Read IRQ Flags Register error %d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f);
+	tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f);
+	tm->tm_hour = bcd2bin(regs[RV3029_A_HR - RV3029_A_SC] & 0x3f);
+	tm->tm_mday = bcd2bin(regs[RV3029_A_DT - RV3029_A_SC] & 0x3f);
+	tm->tm_mon = bcd2bin(regs[RV3029_A_MO - RV3029_A_SC] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(regs[RV3029_A_YR - RV3029_A_SC] & 0x7f) + 100;
+	tm->tm_wday = bcd2bin(regs[RV3029_A_DW - RV3029_A_SC] & 0x07) - 1;
+
+	alarm->enabled = !!(controls & RV3029_IRQ_CTRL_AIE);
+	alarm->pending = (flags & RV3029_IRQ_FLAGS_AF) && alarm->enabled;
+
+	return 0;
+}
+
+static int rv3029_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	int ret;
+	u8 controls;
+
+	ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	if (ret < 0) {
+		dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
+		return ret;
+	}
+
+	/* enable/disable AIE irq */
+	if (enable)
+		controls |= RV3029_IRQ_CTRL_AIE;
+	else
+		controls &= ~RV3029_IRQ_CTRL_AIE;
+
+	ret = rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1);
+	if (ret < 0) {
+		dev_err(dev, "can't update INT reg\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *const tm = &alarm->time;
+	int ret;
+	u8 regs[8];
+
+	/*
+	 * The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	*/
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	ret = rv3029_get_sr(dev, regs);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	/* Activate all the alarms with AE_x bit */
+	regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X;
+	regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X;
+	regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour) & 0x3f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday) & 0x3f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd(tm->tm_mon + 1) & 0x1f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd(tm->tm_wday + 1) & 0x7)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd(tm->tm_year - 100))
+		| RV3029_A_AE_X;
+
+	/* Write the alarm */
+	ret = rv3029_write_regs(dev, RV3029_A_SC, regs,
+				RV3029_ALARM_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	if (alarm->enabled) {
+		/* enable AIE irq */
+		ret = rv3029_alarm_irq_enable(dev, 1);
+		if (ret)
+			return ret;
+	} else {
+		/* disable AIE irq */
+		ret = rv3029_alarm_irq_enable(dev, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 regs[8];
+	int ret;
+
+	/*
+	 * The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	*/
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
+	regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
+	regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
+	regs[RV3029_W_DATE - RV3029_W_SEC] = bin2bcd(tm->tm_mday);
+	regs[RV3029_W_MONTHS - RV3029_W_SEC] = bin2bcd(tm->tm_mon + 1);
+	regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
+	regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 100);
+
+	ret = rv3029_write_regs(dev, RV3029_W_SEC, regs,
+				RV3029_WATCH_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	ret = rv3029_get_sr(dev, regs);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading SR failed\n", __func__);
+		return ret;
+	}
+	/* clear PON bit */
+	ret = rv3029_set_sr(dev, (regs[0] & ~RV3029_STATUS_PON));
+	if (ret < 0) {
+		dev_err(dev, "%s: reading SR failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct rv3029_trickle_tab_elem {
+	u32 r;		/* resistance in ohms */
+	u8 conf;	/* trickle config bits */
+} rv3029_trickle_tab[] = {
+	{
+		.r	= 1076,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+			  RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+	}, {
+		.r	= 1091,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+			  RV3029_TRICKLE_20K,
+	}, {
+		.r	= 1137,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+			  RV3029_TRICKLE_80K,
+	}, {
+		.r	= 1154,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
+	}, {
+		.r	= 1371,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
+			  RV3029_TRICKLE_80K,
+	}, {
+		.r	= 1395,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
+	}, {
+		.r	= 1472,
+		.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
+	}, {
+		.r	= 1500,
+		.conf	= RV3029_TRICKLE_1K,
+	}, {
+		.r	= 3810,
+		.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
+			  RV3029_TRICKLE_80K,
+	}, {
+		.r	= 4000,
+		.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
+	}, {
+		.r	= 4706,
+		.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
+	}, {
+		.r	= 5000,
+		.conf	= RV3029_TRICKLE_5K,
+	}, {
+		.r	= 16000,
+		.conf	= RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+	}, {
+		.r	= 20000,
+		.conf	= RV3029_TRICKLE_20K,
+	}, {
+		.r	= 80000,
+		.conf	= RV3029_TRICKLE_80K,
+	},
+};
+
+static void rv3029_trickle_config(struct device *dev)
+{
+	struct device_node *of_node = dev->of_node;
+	const struct rv3029_trickle_tab_elem *elem;
+	int i, err;
+	u32 ohms;
+	u8 trickle_set_bits;
+
+	if (!of_node)
+		return;
+
+	/* Configure the trickle charger. */
+	err = of_property_read_u32(of_node, "trickle-resistor-ohms", &ohms);
+	if (err) {
+		/* Disable trickle charger. */
+		trickle_set_bits = 0;
+	} else {
+		/* Enable trickle charger. */
+		for (i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++) {
+			elem = &rv3029_trickle_tab[i];
+			if (elem->r >= ohms)
+				break;
+		}
+		trickle_set_bits = elem->conf;
+		dev_info(dev,
+			 "Trickle charger enabled at %d ohms resistance.\n",
+			 elem->r);
+	}
+	err = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
+					RV3029_TRICKLE_MASK,
+					trickle_set_bits);
+	if (err < 0)
+		dev_err(dev, "Failed to update trickle charger config\n");
+}
+
+#ifdef CONFIG_RTC_DRV_RV3029_HWMON
+
+static int rv3029_read_temp(struct device *dev, int *temp_mC)
+{
+	int ret;
+	u8 temp;
+
+	ret = rv3029_read_regs(dev, RV3029_TEMP_PAGE, &temp, 1);
+	if (ret < 0)
+		return ret;
+
+	*temp_mC = ((int)temp - 60) * 1000;
+
+	return 0;
+}
+
+static ssize_t rv3029_hwmon_show_temp(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	int ret, temp_mC;
+
+	ret = rv3029_read_temp(dev, &temp_mC);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", temp_mC);
+}
+
+static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t count)
+{
+	unsigned long interval_ms;
+	int ret;
+	u8 th_set_bits = 0;
+
+	ret = kstrtoul(buf, 10, &interval_ms);
+	if (ret < 0)
+		return ret;
+
+	if (interval_ms != 0) {
+		th_set_bits |= RV3029_EECTRL_THE;
+		if (interval_ms >= 16000)
+			th_set_bits |= RV3029_EECTRL_THP;
+	}
+	ret = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
+					RV3029_EECTRL_THE | RV3029_EECTRL_THP,
+					th_set_bits);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	int ret, interval_ms;
+	u8 eectrl;
+
+	ret = rv3029_eeprom_read(dev, RV3029_CONTROL_E2P_EECTRL,
+				 &eectrl, 1);
+	if (ret < 0)
+		return ret;
+
+	if (eectrl & RV3029_EECTRL_THE) {
+		if (eectrl & RV3029_EECTRL_THP)
+			interval_ms = 16000;
+		else
+			interval_ms = 1000;
+	} else {
+		interval_ms = 0;
+	}
+
+	return sprintf(buf, "%d\n", interval_ms);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, rv3029_hwmon_show_temp,
+			  NULL, 0);
+static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
+			  rv3029_hwmon_show_update_interval,
+			  rv3029_hwmon_set_update_interval, 0);
+
+static struct attribute *rv3029_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_update_interval.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(rv3029_hwmon);
+
+static void rv3029_hwmon_register(struct device *dev, const char *name)
+{
+	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+	struct device *hwmon_dev;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, name, rv3029,
+							   rv3029_hwmon_groups);
+	if (IS_ERR(hwmon_dev)) {
+		dev_warn(dev, "unable to register hwmon device %ld\n",
+			 PTR_ERR(hwmon_dev));
+	}
+}
+
+#else /* CONFIG_RTC_DRV_RV3029_HWMON */
+
+static void rv3029_hwmon_register(struct device *dev, const char *name)
+{
+}
+
+#endif /* CONFIG_RTC_DRV_RV3029_HWMON */
+
+static struct rtc_class_ops rv3029_rtc_ops = {
+	.read_time	= rv3029_read_time,
+	.set_time	= rv3029_set_time,
+};
+
+static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
+			const char *name)
+{
+	struct rv3029_data *rv3029;
+	int rc = 0;
+	u8 buf[1];
+
+	rv3029 = devm_kzalloc(dev, sizeof(*rv3029), GFP_KERNEL);
+	if (!rv3029)
+		return -ENOMEM;
+
+	rv3029->regmap = regmap;
+	rv3029->irq = irq;
+	rv3029->dev = dev;
+	dev_set_drvdata(dev, rv3029);
+
+	rc = rv3029_get_sr(dev, buf);
+	if (rc < 0) {
+		dev_err(dev, "reading status failed\n");
+		return rc;
+	}
+
+	rv3029_trickle_config(dev);
+	rv3029_hwmon_register(dev, name);
+
+	rv3029->rtc = devm_rtc_device_register(dev, name, &rv3029_rtc_ops,
+					       THIS_MODULE);
+	if (IS_ERR(rv3029->rtc)) {
+		dev_err(dev, "unable to register the class device\n");
+		return PTR_ERR(rv3029->rtc);
+	}
+
+	if (rv3029->irq > 0) {
+		rc = devm_request_threaded_irq(dev, rv3029->irq,
+					       NULL, rv3029_handle_irq,
+					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					       "rv3029", dev);
+		if (rc) {
+			dev_warn(dev, "unable to request IRQ, alarms disabled\n");
+			rv3029->irq = 0;
+		} else {
+			rv3029_rtc_ops.read_alarm = rv3029_read_alarm;
+			rv3029_rtc_ops.set_alarm = rv3029_set_alarm;
+			rv3029_rtc_ops.alarm_irq_enable = rv3029_alarm_irq_enable;
+		}
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int rv3029_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
+				     I2C_FUNC_SMBUS_BYTE)) {
+		dev_err(&client->dev, "Adapter does not support SMBUS_I2C_BLOCK or SMBUS_I2C_BYTE\n");
+		return -ENODEV;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return rv3029_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static const struct i2c_device_id rv3029_id[] = {
+	{ "rv3029", 0 },
+	{ "rv3029c2", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rv3029_id);
+
+static const struct of_device_id rv3029_of_match[] = {
+	{ .compatible = "rv3029" },
+	{ .compatible = "rv3029c2" },
+	{ .compatible = "mc,rv3029c2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rv3029_of_match);
+
+static struct i2c_driver rv3029_driver = {
+	.driver = {
+		.name = "rtc-rv3029c2",
+		.of_match_table = of_match_ptr(rv3029_of_match),
+	},
+	.probe		= rv3029_i2c_probe,
+	.id_table	= rv3029_id,
+};
+
+static int rv3029_register_driver(void)
+{
+	return i2c_add_driver(&rv3029_driver);
+}
+
+static void rv3029_unregister_driver(void)
+{
+	i2c_del_driver(&rv3029_driver);
+}
+
+#else
+
+static int rv3029_register_driver(void)
+{
+	return 0;
+}
+
+static void rv3029_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int rv3049_probe(struct spi_device *spi)
+{
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049");
+}
+
+static struct spi_driver rv3049_driver = {
+	.driver = {
+		.name    = "rv3049",
+	},
+	.probe   = rv3049_probe,
+};
+
+static int rv3049_register_driver(void)
+{
+	return spi_register_driver(&rv3049_driver);
+}
+
+static void rv3049_unregister_driver(void)
+{
+	spi_unregister_driver(&rv3049_driver);
+}
+
+#else
+
+static int rv3049_register_driver(void)
+{
+	return 0;
+}
+
+static void rv3049_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init rv30x9_init(void)
+{
+	int ret;
+
+	ret = rv3029_register_driver();
+	if (ret) {
+		pr_err("Failed to register rv3029 driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = rv3049_register_driver();
+	if (ret) {
+		pr_err("Failed to register rv3049 driver: %d\n", ret);
+		rv3029_unregister_driver();
+	}
+
+	return ret;
+}
+module_init(rv30x9_init)
+
+static void __exit rv30x9_exit(void)
+{
+	rv3049_unregister_driver();
+	rv3029_unregister_driver();
+}
+module_exit(rv30x9_exit)
+
+MODULE_AUTHOR("Gregory Hermant <gregory.hermant@calao-systems.com>");
+MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
+MODULE_DESCRIPTION("Micro Crystal RV3029/RV3049 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rv3049");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rv8803.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rv8803.c
new file mode 100644
index 0000000..6e06fb3
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rv8803.c
@@ -0,0 +1,647 @@
+/*
+ * RTC driver for the Micro Crystal RV8803
+ *
+ * Copyright (C) 2015 Micro Crystal SA
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/bitops.h>
+#include <linux/log2.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/rtc.h>
+
+#define RV8803_I2C_TRY_COUNT		4
+
+#define RV8803_SEC			0x00
+#define RV8803_MIN			0x01
+#define RV8803_HOUR			0x02
+#define RV8803_WEEK			0x03
+#define RV8803_DAY			0x04
+#define RV8803_MONTH			0x05
+#define RV8803_YEAR			0x06
+#define RV8803_RAM			0x07
+#define RV8803_ALARM_MIN		0x08
+#define RV8803_ALARM_HOUR		0x09
+#define RV8803_ALARM_WEEK_OR_DAY	0x0A
+#define RV8803_EXT			0x0D
+#define RV8803_FLAG			0x0E
+#define RV8803_CTRL			0x0F
+
+#define RV8803_EXT_WADA			BIT(6)
+
+#define RV8803_FLAG_V1F			BIT(0)
+#define RV8803_FLAG_V2F			BIT(1)
+#define RV8803_FLAG_AF			BIT(3)
+#define RV8803_FLAG_TF			BIT(4)
+#define RV8803_FLAG_UF			BIT(5)
+
+#define RV8803_CTRL_RESET		BIT(0)
+
+#define RV8803_CTRL_EIE			BIT(2)
+#define RV8803_CTRL_AIE			BIT(3)
+#define RV8803_CTRL_TIE			BIT(4)
+#define RV8803_CTRL_UIE			BIT(5)
+
+#define RX8900_BACKUP_CTRL		0x18
+#define RX8900_FLAG_SWOFF		BIT(2)
+#define RX8900_FLAG_VDETOFF		BIT(3)
+
+enum rv8803_type {
+	rv_8803,
+	rx_8900
+};
+
+struct rv8803_data {
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+	struct mutex flags_lock;
+	u8 ctrl;
+	enum rv8803_type type;
+	struct nvmem_config nvmem_cfg;
+};
+
+static int rv8803_read_reg(const struct i2c_client *client, u8 reg)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	/*
+	 * There is a 61µs window during which the RTC does not acknowledge I2C
+	 * transfers. In that case, ensure that there are multiple attempts.
+	 */
+	do
+		ret = i2c_smbus_read_byte_data(client, reg);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret < 0)
+		dev_err(&client->dev, "Unable to read register 0x%02x\n", reg);
+
+	return ret;
+}
+
+static int rv8803_read_regs(const struct i2c_client *client,
+			    u8 reg, u8 count, u8 *values)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_read_i2c_block_data(client, reg, count, values);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret != count) {
+		dev_err(&client->dev,
+			"Unable to read registers 0x%02x..0x%02x\n",
+			reg, reg + count - 1);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int rv8803_write_reg(const struct i2c_client *client, u8 reg, u8 value)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_write_byte_data(client, reg, value);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret)
+		dev_err(&client->dev, "Unable to write register 0x%02x\n", reg);
+
+	return ret;
+}
+
+static int rv8803_write_regs(const struct i2c_client *client,
+			     u8 reg, u8 count, const u8 *values)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_write_i2c_block_data(client, reg, count,
+						     values);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret)
+		dev_err(&client->dev,
+			"Unable to write registers 0x%02x..0x%02x\n",
+			reg, reg + count - 1);
+
+	return ret;
+}
+
+static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct rv8803_data *rv8803 = i2c_get_clientdata(client);
+	unsigned long events = 0;
+	int flags;
+
+	mutex_lock(&rv8803->flags_lock);
+
+	flags = rv8803_read_reg(client, RV8803_FLAG);
+	if (flags <= 0) {
+		mutex_unlock(&rv8803->flags_lock);
+		return IRQ_NONE;
+	}
+
+	if (flags & RV8803_FLAG_V1F)
+		dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n");
+
+	if (flags & RV8803_FLAG_V2F)
+		dev_warn(&client->dev, "Voltage low, data loss detected.\n");
+
+	if (flags & RV8803_FLAG_TF) {
+		flags &= ~RV8803_FLAG_TF;
+		rv8803->ctrl &= ~RV8803_CTRL_TIE;
+		events |= RTC_PF;
+	}
+
+	if (flags & RV8803_FLAG_AF) {
+		flags &= ~RV8803_FLAG_AF;
+		rv8803->ctrl &= ~RV8803_CTRL_AIE;
+		events |= RTC_AF;
+	}
+
+	if (flags & RV8803_FLAG_UF) {
+		flags &= ~RV8803_FLAG_UF;
+		rv8803->ctrl &= ~RV8803_CTRL_UIE;
+		events |= RTC_UF;
+	}
+
+	if (events) {
+		rtc_update_irq(rv8803->rtc, 1, events);
+		rv8803_write_reg(client, RV8803_FLAG, flags);
+		rv8803_write_reg(rv8803->client, RV8803_CTRL, rv8803->ctrl);
+	}
+
+	mutex_unlock(&rv8803->flags_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	u8 date1[7];
+	u8 date2[7];
+	u8 *date = date1;
+	int ret, flags;
+
+	flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
+	if (flags < 0)
+		return flags;
+
+	if (flags & RV8803_FLAG_V2F) {
+		dev_warn(dev, "Voltage low, data is invalid.\n");
+		return -EINVAL;
+	}
+
+	ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date);
+	if (ret)
+		return ret;
+
+	if ((date1[RV8803_SEC] & 0x7f) == bin2bcd(59)) {
+		ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date2);
+		if (ret)
+			return ret;
+
+		if ((date2[RV8803_SEC] & 0x7f) != bin2bcd(59))
+			date = date2;
+	}
+
+	tm->tm_sec  = bcd2bin(date[RV8803_SEC] & 0x7f);
+	tm->tm_min  = bcd2bin(date[RV8803_MIN] & 0x7f);
+	tm->tm_hour = bcd2bin(date[RV8803_HOUR] & 0x3f);
+	tm->tm_wday = ilog2(date[RV8803_WEEK] & 0x7f);
+	tm->tm_mday = bcd2bin(date[RV8803_DAY] & 0x3f);
+	tm->tm_mon  = bcd2bin(date[RV8803_MONTH] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(date[RV8803_YEAR]) + 100;
+
+	return 0;
+}
+
+static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	u8 date[7];
+	int ctrl, flags, ret;
+
+	if ((tm->tm_year < 100) || (tm->tm_year > 199))
+		return -EINVAL;
+
+	ctrl = rv8803_read_reg(rv8803->client, RV8803_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+
+	/* Stop the clock */
+	ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+			       ctrl | RV8803_CTRL_RESET);
+	if (ret)
+		return ret;
+
+	date[RV8803_SEC]   = bin2bcd(tm->tm_sec);
+	date[RV8803_MIN]   = bin2bcd(tm->tm_min);
+	date[RV8803_HOUR]  = bin2bcd(tm->tm_hour);
+	date[RV8803_WEEK]  = 1 << (tm->tm_wday);
+	date[RV8803_DAY]   = bin2bcd(tm->tm_mday);
+	date[RV8803_MONTH] = bin2bcd(tm->tm_mon + 1);
+	date[RV8803_YEAR]  = bin2bcd(tm->tm_year - 100);
+
+	ret = rv8803_write_regs(rv8803->client, RV8803_SEC, 7, date);
+	if (ret)
+		return ret;
+
+	/* Restart the clock */
+	ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+			       ctrl & ~RV8803_CTRL_RESET);
+	if (ret)
+		return ret;
+
+	mutex_lock(&rv8803->flags_lock);
+
+	flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
+	if (flags < 0) {
+		mutex_unlock(&rv8803->flags_lock);
+		return flags;
+	}
+
+	ret = rv8803_write_reg(rv8803->client, RV8803_FLAG,
+			       flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F));
+
+	mutex_unlock(&rv8803->flags_lock);
+
+	return ret;
+}
+
+static int rv8803_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	struct i2c_client *client = rv8803->client;
+	u8 alarmvals[3];
+	int flags, ret;
+
+	ret = rv8803_read_regs(client, RV8803_ALARM_MIN, 3, alarmvals);
+	if (ret)
+		return ret;
+
+	flags = rv8803_read_reg(client, RV8803_FLAG);
+	if (flags < 0)
+		return flags;
+
+	alrm->time.tm_sec  = 0;
+	alrm->time.tm_min  = bcd2bin(alarmvals[0] & 0x7f);
+	alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
+	alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
+
+	alrm->enabled = !!(rv8803->ctrl & RV8803_CTRL_AIE);
+	alrm->pending = (flags & RV8803_FLAG_AF) && alrm->enabled;
+
+	return 0;
+}
+
+static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	u8 alarmvals[3];
+	u8 ctrl[2];
+	int ret, err;
+
+	/* The alarm has no seconds, round up to nearest minute */
+	if (alrm->time.tm_sec) {
+		time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
+
+		alarm_time += 60 - alrm->time.tm_sec;
+		rtc_time64_to_tm(alarm_time, &alrm->time);
+	}
+
+	mutex_lock(&rv8803->flags_lock);
+
+	ret = rv8803_read_regs(client, RV8803_FLAG, 2, ctrl);
+	if (ret) {
+		mutex_unlock(&rv8803->flags_lock);
+		return ret;
+	}
+
+	alarmvals[0] = bin2bcd(alrm->time.tm_min);
+	alarmvals[1] = bin2bcd(alrm->time.tm_hour);
+	alarmvals[2] = bin2bcd(alrm->time.tm_mday);
+
+	if (rv8803->ctrl & (RV8803_CTRL_AIE | RV8803_CTRL_UIE)) {
+		rv8803->ctrl &= ~(RV8803_CTRL_AIE | RV8803_CTRL_UIE);
+		err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+				       rv8803->ctrl);
+		if (err) {
+			mutex_unlock(&rv8803->flags_lock);
+			return err;
+		}
+	}
+
+	ctrl[1] &= ~RV8803_FLAG_AF;
+	err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[1]);
+	mutex_unlock(&rv8803->flags_lock);
+	if (err)
+		return err;
+
+	err = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3, alarmvals);
+	if (err)
+		return err;
+
+	if (alrm->enabled) {
+		if (rv8803->rtc->uie_rtctimer.enabled)
+			rv8803->ctrl |= RV8803_CTRL_UIE;
+		if (rv8803->rtc->aie_timer.enabled)
+			rv8803->ctrl |= RV8803_CTRL_AIE;
+
+		err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+				       rv8803->ctrl);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	int ctrl, flags, err;
+
+	ctrl = rv8803->ctrl;
+
+	if (enabled) {
+		if (rv8803->rtc->uie_rtctimer.enabled)
+			ctrl |= RV8803_CTRL_UIE;
+		if (rv8803->rtc->aie_timer.enabled)
+			ctrl |= RV8803_CTRL_AIE;
+	} else {
+		if (!rv8803->rtc->uie_rtctimer.enabled)
+			ctrl &= ~RV8803_CTRL_UIE;
+		if (!rv8803->rtc->aie_timer.enabled)
+			ctrl &= ~RV8803_CTRL_AIE;
+	}
+
+	mutex_lock(&rv8803->flags_lock);
+	flags = rv8803_read_reg(client, RV8803_FLAG);
+	if (flags < 0) {
+		mutex_unlock(&rv8803->flags_lock);
+		return flags;
+	}
+	flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF);
+	err = rv8803_write_reg(client, RV8803_FLAG, flags);
+	mutex_unlock(&rv8803->flags_lock);
+	if (err)
+		return err;
+
+	if (ctrl != rv8803->ctrl) {
+		rv8803->ctrl = ctrl;
+		err = rv8803_write_reg(client, RV8803_CTRL, rv8803->ctrl);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+	int flags, ret = 0;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		flags = rv8803_read_reg(client, RV8803_FLAG);
+		if (flags < 0)
+			return flags;
+
+		if (flags & RV8803_FLAG_V1F)
+			dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n");
+
+		if (flags & RV8803_FLAG_V2F)
+			dev_warn(&client->dev, "Voltage low, data loss detected.\n");
+
+		flags &= RV8803_FLAG_V1F | RV8803_FLAG_V2F;
+
+		if (copy_to_user((void __user *)arg, &flags, sizeof(int)))
+			return -EFAULT;
+
+		return 0;
+
+	case RTC_VL_CLR:
+		mutex_lock(&rv8803->flags_lock);
+		flags = rv8803_read_reg(client, RV8803_FLAG);
+		if (flags < 0) {
+			mutex_unlock(&rv8803->flags_lock);
+			return flags;
+		}
+
+		flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
+		ret = rv8803_write_reg(client, RV8803_FLAG, flags);
+		mutex_unlock(&rv8803->flags_lock);
+		if (ret)
+			return ret;
+
+		return 0;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static int rv8803_nvram_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	int ret;
+
+	ret = rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rv8803_nvram_read(void *priv, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	int ret;
+
+	ret = rv8803_read_reg(priv, RV8803_RAM);
+	if (ret < 0)
+		return ret;
+
+	*(u8 *)val = ret;
+
+	return 0;
+}
+
+static struct rtc_class_ops rv8803_rtc_ops = {
+	.read_time = rv8803_get_time,
+	.set_time = rv8803_set_time,
+	.ioctl = rv8803_ioctl,
+};
+
+static int rx8900_trickle_charger_init(struct rv8803_data *rv8803)
+{
+	struct i2c_client *client = rv8803->client;
+	struct device_node *node = client->dev.of_node;
+	int err;
+	u8 flags;
+
+	if (!node)
+		return 0;
+
+	if (rv8803->type != rx_8900)
+		return 0;
+
+	err = i2c_smbus_read_byte_data(rv8803->client, RX8900_BACKUP_CTRL);
+	if (err < 0)
+		return err;
+
+	flags = ~(RX8900_FLAG_VDETOFF | RX8900_FLAG_SWOFF) & (u8)err;
+
+	if (of_property_read_bool(node, "epson,vdet-disable"))
+		flags |= RX8900_FLAG_VDETOFF;
+
+	if (of_property_read_bool(node, "trickle-diode-disable"))
+		flags |= RX8900_FLAG_SWOFF;
+
+	return i2c_smbus_write_byte_data(rv8803->client, RX8900_BACKUP_CTRL,
+					 flags);
+}
+
+static int rv8803_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rv8803_data *rv8803;
+	int err, flags;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
+		return -EIO;
+	}
+
+	rv8803 = devm_kzalloc(&client->dev, sizeof(struct rv8803_data),
+			      GFP_KERNEL);
+	if (!rv8803)
+		return -ENOMEM;
+
+	mutex_init(&rv8803->flags_lock);
+	rv8803->client = client;
+	if (client->dev.of_node)
+		rv8803->type = (enum rv8803_type)
+			of_device_get_match_data(&client->dev);
+	else
+		rv8803->type = id->driver_data;
+	i2c_set_clientdata(client, rv8803);
+
+	flags = rv8803_read_reg(client, RV8803_FLAG);
+	if (flags < 0)
+		return flags;
+
+	if (flags & RV8803_FLAG_V1F)
+		dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n");
+
+	if (flags & RV8803_FLAG_V2F)
+		dev_warn(&client->dev, "Voltage low, data loss detected.\n");
+
+	if (flags & RV8803_FLAG_AF)
+		dev_warn(&client->dev, "An alarm maybe have been missed.\n");
+
+	rv8803->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(rv8803->rtc)) {
+		return PTR_ERR(rv8803->rtc);
+	}
+
+	if (client->irq > 0) {
+		err = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, rv8803_handle_irq,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						"rv8803", client);
+		if (err) {
+			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
+			client->irq = 0;
+		} else {
+			rv8803_rtc_ops.read_alarm = rv8803_get_alarm;
+			rv8803_rtc_ops.set_alarm = rv8803_set_alarm;
+			rv8803_rtc_ops.alarm_irq_enable = rv8803_alarm_irq_enable;
+		}
+	}
+
+	rv8803->nvmem_cfg.name = "rv8803_nvram",
+	rv8803->nvmem_cfg.word_size = 1,
+	rv8803->nvmem_cfg.stride = 1,
+	rv8803->nvmem_cfg.size = 1,
+	rv8803->nvmem_cfg.reg_read = rv8803_nvram_read,
+	rv8803->nvmem_cfg.reg_write = rv8803_nvram_write,
+	rv8803->nvmem_cfg.priv = client;
+
+	rv8803->rtc->ops = &rv8803_rtc_ops;
+	rv8803->rtc->nvmem_config = &rv8803->nvmem_cfg;
+	rv8803->rtc->nvram_old_abi = true;
+	err = rtc_register_device(rv8803->rtc);
+	if (err)
+		return err;
+
+	err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
+	if (err)
+		return err;
+
+	err = rx8900_trickle_charger_init(rv8803);
+	if (err) {
+		dev_err(&client->dev, "failed to init charger\n");
+		return err;
+	}
+
+	rv8803->rtc->max_user_freq = 1;
+
+	return 0;
+}
+
+static const struct i2c_device_id rv8803_id[] = {
+	{ "rv8803", rv_8803 },
+	{ "rx8900", rx_8900 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rv8803_id);
+
+static const struct of_device_id rv8803_of_match[] = {
+	{
+		.compatible = "microcrystal,rv8803",
+		.data = (void *)rv_8803
+	},
+	{
+		.compatible = "epson,rx8900",
+		.data = (void *)rx_8900
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rv8803_of_match);
+
+static struct i2c_driver rv8803_driver = {
+	.driver = {
+		.name = "rtc-rv8803",
+		.of_match_table = of_match_ptr(rv8803_of_match),
+	},
+	.probe		= rv8803_probe,
+	.id_table	= rv8803_id,
+};
+module_i2c_driver(rv8803_driver);
+
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Micro Crystal RV8803 RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rx4581.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx4581.c
new file mode 100644
index 0000000..de3fe4f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx4581.c
@@ -0,0 +1,304 @@
+/* drivers/rtc/rtc-rx4581.c
+ *
+ * written by Torben Hohn <torbenh@linutronix.de>
+ *
+ * Based on:
+ * drivers/rtc/rtc-max6902.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for MAX6902 spi RTC
+ *
+ * and based on:
+ * drivers/rtc/rtc-rx8581.c
+ *
+ * An I2C driver for the Epson RX8581 RTC
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
+ * Copyright 2005-06 Tower Technologies
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define RX4581_REG_SC		0x00 /* Second in BCD */
+#define RX4581_REG_MN		0x01 /* Minute in BCD */
+#define RX4581_REG_HR		0x02 /* Hour in BCD */
+#define RX4581_REG_DW		0x03 /* Day of Week */
+#define RX4581_REG_DM		0x04 /* Day of Month in BCD */
+#define RX4581_REG_MO		0x05 /* Month in BCD */
+#define RX4581_REG_YR		0x06 /* Year in BCD */
+#define RX4581_REG_RAM		0x07 /* RAM */
+#define RX4581_REG_AMN		0x08 /* Alarm Min in BCD*/
+#define RX4581_REG_AHR		0x09 /* Alarm Hour in BCD */
+#define RX4581_REG_ADM		0x0A
+#define RX4581_REG_ADW		0x0A
+#define RX4581_REG_TMR0		0x0B
+#define RX4581_REG_TMR1		0x0C
+#define RX4581_REG_EXT		0x0D /* Extension Register */
+#define RX4581_REG_FLAG		0x0E /* Flag Register */
+#define RX4581_REG_CTRL		0x0F /* Control Register */
+
+
+/* Flag Register bit definitions */
+#define RX4581_FLAG_UF		0x20 /* Update */
+#define RX4581_FLAG_TF		0x10 /* Timer */
+#define RX4581_FLAG_AF		0x08 /* Alarm */
+#define RX4581_FLAG_VLF		0x02 /* Voltage Low */
+
+/* Control Register bit definitions */
+#define RX4581_CTRL_UIE		0x20 /* Update Interrupt Enable */
+#define RX4581_CTRL_TIE		0x10 /* Timer Interrupt Enable */
+#define RX4581_CTRL_AIE		0x08 /* Alarm Interrupt Enable */
+#define RX4581_CTRL_STOP	0x02 /* STOP bit */
+#define RX4581_CTRL_RESET	0x01 /* RESET bit */
+
+static int rx4581_set_reg(struct device *dev, unsigned char address,
+				unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	/* high nibble must be '0' to write */
+	buf[0] = address & 0x0f;
+	buf[1] = data;
+
+	return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int rx4581_get_reg(struct device *dev, unsigned char address,
+				unsigned char *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	/* Set MSB to indicate read */
+	*data = address | 0x80;
+
+	return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+/*
+ * In the routines that deal directly with the rx8581 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int rx4581_get_datetime(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char date[7];
+	unsigned char data;
+	int err;
+
+	/* First we ensure that the "update flag" is not set, we read the
+	 * time and date then re-read the "update flag". If the update flag
+	 * has been set, we know that the time has changed during the read so
+	 * we repeat the whole process again.
+	 */
+	err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+	if (err != 0) {
+		dev_err(dev, "Unable to read device flags\n");
+		return -EIO;
+	}
+
+	do {
+		/* If update flag set, clear it */
+		if (data & RX4581_FLAG_UF) {
+			err = rx4581_set_reg(dev,
+				RX4581_REG_FLAG, (data & ~RX4581_FLAG_UF));
+			if (err != 0) {
+				dev_err(dev, "Unable to write device "
+					"flags\n");
+				return -EIO;
+			}
+		}
+
+		/* Now read time and date */
+		date[0] = 0x80;
+		err = spi_write_then_read(spi, date, 1, date, 7);
+		if (err < 0) {
+			dev_err(dev, "Unable to read date\n");
+			return -EIO;
+		}
+
+		/* Check flag register */
+		err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+		if (err != 0) {
+			dev_err(dev, "Unable to read device flags\n");
+			return -EIO;
+		}
+	} while (data & RX4581_FLAG_UF);
+
+	if (data & RX4581_FLAG_VLF)
+		dev_info(dev,
+			"low voltage detected, date/time is not reliable.\n");
+
+	dev_dbg(dev,
+		"%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+		"wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
+		__func__,
+		date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+	tm->tm_sec = bcd2bin(date[RX4581_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(date[RX4581_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(date[RX4581_REG_HR] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_wday = ilog2(date[RX4581_REG_DW] & 0x7F);
+	tm->tm_mday = bcd2bin(date[RX4581_REG_DM] & 0x3F);
+	tm->tm_mon = bcd2bin(date[RX4581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(date[RX4581_REG_YR]);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+
+
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	err = rtc_valid_tm(tm);
+	if (err < 0)
+		dev_err(dev, "retrieved date/time is not valid.\n");
+
+	return err;
+}
+
+static int rx4581_set_datetime(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int err;
+	unsigned char buf[8], data;
+
+	dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	buf[0] = 0x00;
+	/* hours, minutes and seconds */
+	buf[RX4581_REG_SC+1] = bin2bcd(tm->tm_sec);
+	buf[RX4581_REG_MN+1] = bin2bcd(tm->tm_min);
+	buf[RX4581_REG_HR+1] = bin2bcd(tm->tm_hour);
+
+	buf[RX4581_REG_DM+1] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[RX4581_REG_MO+1] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	buf[RX4581_REG_YR+1] = bin2bcd(tm->tm_year % 100);
+	buf[RX4581_REG_DW+1] = (0x1 << tm->tm_wday);
+
+	/* Stop the clock */
+	err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
+	if (err != 0) {
+		dev_err(dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = rx4581_set_reg(dev, RX4581_REG_CTRL,
+		(data | RX4581_CTRL_STOP));
+	if (err != 0) {
+		dev_err(dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	/* write register's data */
+	err = spi_write_then_read(spi, buf, 8, NULL, 0);
+	if (err != 0) {
+		dev_err(dev, "Unable to write to date registers\n");
+		return -EIO;
+	}
+
+	/* get VLF and clear it */
+	err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+	if (err != 0) {
+		dev_err(dev, "Unable to read flag register\n");
+		return -EIO;
+	}
+
+	err = rx4581_set_reg(dev, RX4581_REG_FLAG,
+		(data & ~(RX4581_FLAG_VLF)));
+	if (err != 0) {
+		dev_err(dev, "Unable to write flag register\n");
+		return -EIO;
+	}
+
+	/* Restart the clock */
+	err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
+	if (err != 0) {
+		dev_err(dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = rx4581_set_reg(dev, RX4581_REG_CTRL,
+		(data & ~(RX4581_CTRL_STOP)));
+	if (err != 0) {
+		dev_err(dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops rx4581_rtc_ops = {
+	.read_time	= rx4581_get_datetime,
+	.set_time	= rx4581_set_datetime,
+};
+
+static int rx4581_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	unsigned char tmp;
+	int res;
+
+	res = rx4581_get_reg(&spi->dev, RX4581_REG_SC, &tmp);
+	if (res != 0)
+		return res;
+
+	rtc = devm_rtc_device_register(&spi->dev, "rx4581",
+				&rx4581_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+	return 0;
+}
+
+static const struct spi_device_id rx4581_id[] = {
+	{ "rx4581", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, rx4581_id);
+
+static struct spi_driver rx4581_driver = {
+	.driver = {
+		.name	= "rtc-rx4581",
+	},
+	.probe	= rx4581_probe,
+	.id_table = rx4581_id,
+};
+
+module_spi_driver(rx4581_driver);
+
+MODULE_DESCRIPTION("rx4581 spi RTC driver");
+MODULE_AUTHOR("Torben Hohn");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:rtc-rx4581");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rx6110.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx6110.c
new file mode 100644
index 0000000..7c9c08e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx6110.c
@@ -0,0 +1,401 @@
+/*
+ * Driver for the Epson RTC module RX-6110 SA
+ *
+ * Copyright(C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright(C) SEIKO EPSON CORPORATION 2013. All rights reserved.
+ *
+ * This driver software is distributed as is, without any warranty of any kind,
+ * either express or implied as further specified in the GNU Public License.
+ * This software may be used and distributed according to the terms of the GNU
+ * Public License, version 2 as published by the Free Software Foundation.
+ * See the file COPYING in the main directory of this archive for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+
+/* RX-6110 Register definitions */
+#define RX6110_REG_SEC		0x10
+#define RX6110_REG_MIN		0x11
+#define RX6110_REG_HOUR		0x12
+#define RX6110_REG_WDAY		0x13
+#define RX6110_REG_MDAY		0x14
+#define RX6110_REG_MONTH	0x15
+#define RX6110_REG_YEAR		0x16
+#define RX6110_REG_RES1		0x17
+#define RX6110_REG_ALMIN	0x18
+#define RX6110_REG_ALHOUR	0x19
+#define RX6110_REG_ALWDAY	0x1A
+#define RX6110_REG_TCOUNT0	0x1B
+#define RX6110_REG_TCOUNT1	0x1C
+#define RX6110_REG_EXT		0x1D
+#define RX6110_REG_FLAG		0x1E
+#define RX6110_REG_CTRL		0x1F
+#define RX6110_REG_USER0	0x20
+#define RX6110_REG_USER1	0x21
+#define RX6110_REG_USER2	0x22
+#define RX6110_REG_USER3	0x23
+#define RX6110_REG_USER4	0x24
+#define RX6110_REG_USER5	0x25
+#define RX6110_REG_USER6	0x26
+#define RX6110_REG_USER7	0x27
+#define RX6110_REG_USER8	0x28
+#define RX6110_REG_USER9	0x29
+#define RX6110_REG_USERA	0x2A
+#define RX6110_REG_USERB	0x2B
+#define RX6110_REG_USERC	0x2C
+#define RX6110_REG_USERD	0x2D
+#define RX6110_REG_USERE	0x2E
+#define RX6110_REG_USERF	0x2F
+#define RX6110_REG_RES2		0x30
+#define RX6110_REG_RES3		0x31
+#define RX6110_REG_IRQ		0x32
+
+#define RX6110_BIT_ALARM_EN		BIT(7)
+
+/* Extension Register (1Dh) bit positions */
+#define RX6110_BIT_EXT_TSEL0		BIT(0)
+#define RX6110_BIT_EXT_TSEL1		BIT(1)
+#define RX6110_BIT_EXT_TSEL2		BIT(2)
+#define RX6110_BIT_EXT_WADA		BIT(3)
+#define RX6110_BIT_EXT_TE		BIT(4)
+#define RX6110_BIT_EXT_USEL		BIT(5)
+#define RX6110_BIT_EXT_FSEL0		BIT(6)
+#define RX6110_BIT_EXT_FSEL1		BIT(7)
+
+/* Flag Register (1Eh) bit positions */
+#define RX6110_BIT_FLAG_VLF		BIT(1)
+#define RX6110_BIT_FLAG_AF		BIT(3)
+#define RX6110_BIT_FLAG_TF		BIT(4)
+#define RX6110_BIT_FLAG_UF		BIT(5)
+
+/* Control Register (1Fh) bit positions */
+#define RX6110_BIT_CTRL_TBKE		BIT(0)
+#define RX6110_BIT_CTRL_TBKON		BIT(1)
+#define RX6110_BIT_CTRL_TSTP		BIT(2)
+#define RX6110_BIT_CTRL_AIE		BIT(3)
+#define RX6110_BIT_CTRL_TIE		BIT(4)
+#define RX6110_BIT_CTRL_UIE		BIT(5)
+#define RX6110_BIT_CTRL_STOP		BIT(6)
+#define RX6110_BIT_CTRL_TEST		BIT(7)
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WDAY,
+	RTC_MDAY,
+	RTC_MONTH,
+	RTC_YEAR,
+	RTC_NR_TIME
+};
+
+#define RX6110_DRIVER_NAME		"rx6110"
+
+struct rx6110_data {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+};
+
+/**
+ * rx6110_rtc_tm_to_data - convert rtc_time to native time encoding
+ *
+ * @tm: holds date and time
+ * @data: holds the encoding in rx6110 native form
+ */
+static int rx6110_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+		 tm->tm_sec, tm->tm_min, tm->tm_hour,
+		 tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+	/*
+	 * The year in the RTC is a value between 0 and 99.
+	 * Assume that this represents the current century
+	 * and disregard all other values.
+	 */
+	if (tm->tm_year < 100 || tm->tm_year >= 200)
+		return -EINVAL;
+
+	data[RTC_SEC] = bin2bcd(tm->tm_sec);
+	data[RTC_MIN] = bin2bcd(tm->tm_min);
+	data[RTC_HOUR] = bin2bcd(tm->tm_hour);
+	data[RTC_WDAY] = BIT(bin2bcd(tm->tm_wday));
+	data[RTC_MDAY] = bin2bcd(tm->tm_mday);
+	data[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
+	data[RTC_YEAR] = bin2bcd(tm->tm_year % 100);
+
+	return 0;
+}
+
+/**
+ * rx6110_data_to_rtc_tm - convert native time encoding to rtc_time
+ *
+ * @data: holds the encoding in rx6110 native form
+ * @tm: holds date and time
+ */
+static int rx6110_data_to_rtc_tm(u8 *data, struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(data[RTC_SEC] & 0x7f);
+	tm->tm_min = bcd2bin(data[RTC_MIN] & 0x7f);
+	/* only 24-hour clock */
+	tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
+	tm->tm_wday = ffs(data[RTC_WDAY] & 0x7f);
+	tm->tm_mday = bcd2bin(data[RTC_MDAY] & 0x3f);
+	tm->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(data[RTC_YEAR]) + 100;
+
+	pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+		 tm->tm_sec, tm->tm_min, tm->tm_hour,
+		 tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+	/*
+	 * The year in the RTC is a value between 0 and 99.
+	 * Assume that this represents the current century
+	 * and disregard all other values.
+	 */
+	if (tm->tm_year < 100 || tm->tm_year >= 200)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * rx6110_set_time - set the current time in the rx6110 registers
+ *
+ * @dev: the rtc device in use
+ * @tm: holds date and time
+ *
+ * BUG: The HW assumes every year that is a multiple of 4 to be a leap
+ * year. Next time this is wrong is 2100, which will not be a leap year
+ *
+ * Note: If STOP is not set/cleared, the clock will start when the seconds
+ *       register is written
+ *
+ */
+static int rx6110_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rx6110_data *rx6110 = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = rx6110_rtc_tm_to_data(tm, data);
+	if (ret < 0)
+		return ret;
+
+	/* set STOP bit before changing clock/calendar */
+	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
+				 RX6110_BIT_CTRL_STOP, RX6110_BIT_CTRL_STOP);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_write(rx6110->regmap, RX6110_REG_SEC, data,
+				RTC_NR_TIME);
+	if (ret)
+		return ret;
+
+	/* The time in the RTC is valid. Be sure to have VLF cleared. */
+	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
+				 RX6110_BIT_FLAG_VLF, 0);
+	if (ret)
+		return ret;
+
+	/* clear STOP bit after changing clock/calendar */
+	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
+				 RX6110_BIT_CTRL_STOP, 0);
+
+	return ret;
+}
+
+/**
+ * rx6110_get_time - get the current time from the rx6110 registers
+ * @dev: the rtc device in use
+ * @tm: holds date and time
+ */
+static int rx6110_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rx6110_data *rx6110 = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int flags;
+	int ret;
+
+	ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
+	if (ret)
+		return -EINVAL;
+
+	/* check for VLF Flag (set at power-on) */
+	if ((flags & RX6110_BIT_FLAG_VLF)) {
+		dev_warn(dev, "Voltage low, data is invalid.\n");
+		return -EINVAL;
+	}
+
+	/* read registers to date */
+	ret = regmap_bulk_read(rx6110->regmap, RX6110_REG_SEC, data,
+			       RTC_NR_TIME);
+	if (ret)
+		return ret;
+
+	ret = rx6110_data_to_rtc_tm(data, tm);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+	return rtc_valid_tm(tm);
+}
+
+static const struct reg_sequence rx6110_default_regs[] = {
+	{ RX6110_REG_RES1,   0xB8 },
+	{ RX6110_REG_RES2,   0x00 },
+	{ RX6110_REG_RES3,   0x10 },
+	{ RX6110_REG_IRQ,    0x00 },
+	{ RX6110_REG_ALMIN,  0x00 },
+	{ RX6110_REG_ALHOUR, 0x00 },
+	{ RX6110_REG_ALWDAY, 0x00 },
+};
+
+/**
+ * rx6110_init - initialize the rx6110 registers
+ *
+ * @rx6110: pointer to the rx6110 struct in use
+ *
+ */
+static int rx6110_init(struct rx6110_data *rx6110)
+{
+	struct rtc_device *rtc = rx6110->rtc;
+	int flags;
+	int ret;
+
+	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_EXT,
+				 RX6110_BIT_EXT_TE, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_register_patch(rx6110->regmap, rx6110_default_regs,
+				    ARRAY_SIZE(rx6110_default_regs));
+	if (ret)
+		return ret;
+
+	ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
+	if (ret)
+		return ret;
+
+	/* check for VLF Flag (set at power-on) */
+	if ((flags & RX6110_BIT_FLAG_VLF))
+		dev_warn(&rtc->dev, "Voltage low, data loss detected.\n");
+
+	/* check for Alarm Flag */
+	if (flags & RX6110_BIT_FLAG_AF)
+		dev_warn(&rtc->dev, "An alarm may have been missed.\n");
+
+	/* check for Periodic Timer Flag */
+	if (flags & RX6110_BIT_FLAG_TF)
+		dev_warn(&rtc->dev, "Periodic timer was detected\n");
+
+	/* check for Update Timer Flag */
+	if (flags & RX6110_BIT_FLAG_UF)
+		dev_warn(&rtc->dev, "Update timer was detected\n");
+
+	/* clear all flags BUT VLF */
+	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
+				 RX6110_BIT_FLAG_AF |
+				 RX6110_BIT_FLAG_UF |
+				 RX6110_BIT_FLAG_TF,
+				 0);
+
+	return ret;
+}
+
+static const struct rtc_class_ops rx6110_rtc_ops = {
+	.read_time = rx6110_get_time,
+	.set_time = rx6110_set_time,
+};
+
+static struct regmap_config regmap_spi_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RX6110_REG_IRQ,
+	.read_flag_mask = 0x80,
+};
+
+/**
+ * rx6110_probe - initialize rtc driver
+ * @spi: pointer to spi device
+ */
+static int rx6110_probe(struct spi_device *spi)
+{
+	struct rx6110_data *rx6110;
+	int err;
+
+	if ((spi->bits_per_word && spi->bits_per_word != 8) ||
+	    (spi->max_speed_hz > 2000000) ||
+	    (spi->mode != (SPI_CS_HIGH | SPI_CPOL | SPI_CPHA))) {
+		dev_warn(&spi->dev, "SPI settings: bits_per_word: %d, max_speed_hz: %d, mode: %xh\n",
+			 spi->bits_per_word, spi->max_speed_hz, spi->mode);
+		dev_warn(&spi->dev, "driving device in an unsupported mode");
+	}
+
+	rx6110 = devm_kzalloc(&spi->dev, sizeof(*rx6110), GFP_KERNEL);
+	if (!rx6110)
+		return -ENOMEM;
+
+	rx6110->regmap = devm_regmap_init_spi(spi, &regmap_spi_config);
+	if (IS_ERR(rx6110->regmap)) {
+		dev_err(&spi->dev, "regmap init failed for rtc rx6110\n");
+		return PTR_ERR(rx6110->regmap);
+	}
+
+	spi_set_drvdata(spi, rx6110);
+
+	rx6110->rtc = devm_rtc_device_register(&spi->dev,
+					       RX6110_DRIVER_NAME,
+					       &rx6110_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rx6110->rtc))
+		return PTR_ERR(rx6110->rtc);
+
+	err = rx6110_init(rx6110);
+	if (err)
+		return err;
+
+	rx6110->rtc->max_user_freq = 1;
+
+	return 0;
+}
+
+static int rx6110_remove(struct spi_device *spi)
+{
+	return 0;
+}
+
+static const struct spi_device_id rx6110_id[] = {
+	{ "rx6110", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, rx6110_id);
+
+static struct spi_driver rx6110_driver = {
+	.driver = {
+		.name = RX6110_DRIVER_NAME,
+	},
+	.probe		= rx6110_probe,
+	.remove		= rx6110_remove,
+	.id_table	= rx6110_id,
+};
+
+module_spi_driver(rx6110_driver);
+
+MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>");
+MODULE_DESCRIPTION("RX-6110 SA RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8010.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8010.c
new file mode 100644
index 0000000..1ed3403
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8010.c
@@ -0,0 +1,506 @@
+/*
+ * Driver for the Epson RTC module RX-8010 SJ
+ *
+ * Copyright(C) Timesys Corporation 2015
+ * Copyright(C) General Electric Company 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+#define RX8010_SEC     0x10
+#define RX8010_MIN     0x11
+#define RX8010_HOUR    0x12
+#define RX8010_WDAY    0x13
+#define RX8010_MDAY    0x14
+#define RX8010_MONTH   0x15
+#define RX8010_YEAR    0x16
+#define RX8010_YEAR    0x16
+#define RX8010_RESV17  0x17
+#define RX8010_ALMIN   0x18
+#define RX8010_ALHOUR  0x19
+#define RX8010_ALWDAY  0x1A
+#define RX8010_TCOUNT0 0x1B
+#define RX8010_TCOUNT1 0x1C
+#define RX8010_EXT     0x1D
+#define RX8010_FLAG    0x1E
+#define RX8010_CTRL    0x1F
+/* 0x20 to 0x2F are user registers */
+#define RX8010_RESV30  0x30
+#define RX8010_RESV31  0x32
+#define RX8010_IRQ     0x32
+
+#define RX8010_EXT_WADA  BIT(3)
+
+#define RX8010_FLAG_VLF  BIT(1)
+#define RX8010_FLAG_AF   BIT(3)
+#define RX8010_FLAG_TF   BIT(4)
+#define RX8010_FLAG_UF   BIT(5)
+
+#define RX8010_CTRL_AIE  BIT(3)
+#define RX8010_CTRL_UIE  BIT(5)
+#define RX8010_CTRL_STOP BIT(6)
+#define RX8010_CTRL_TEST BIT(7)
+
+#define RX8010_ALARM_AE  BIT(7)
+
+static const struct i2c_device_id rx8010_id[] = {
+	{ "rx8010", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rx8010_id);
+
+static const struct of_device_id rx8010_of_match[] = {
+	{ .compatible = "epson,rx8010" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rx8010_of_match);
+
+struct rx8010_data {
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+	u8 ctrlreg;
+};
+
+static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct rx8010_data *rx8010 = i2c_get_clientdata(client);
+	int flagreg;
+
+	mutex_lock(&rx8010->rtc->ops_lock);
+
+	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
+
+	if (flagreg <= 0) {
+		mutex_unlock(&rx8010->rtc->ops_lock);
+		return IRQ_NONE;
+	}
+
+	if (flagreg & RX8010_FLAG_VLF)
+		dev_warn(&client->dev, "Frequency stop detected\n");
+
+	if (flagreg & RX8010_FLAG_TF) {
+		flagreg &= ~RX8010_FLAG_TF;
+		rtc_update_irq(rx8010->rtc, 1, RTC_PF | RTC_IRQF);
+	}
+
+	if (flagreg & RX8010_FLAG_AF) {
+		flagreg &= ~RX8010_FLAG_AF;
+		rtc_update_irq(rx8010->rtc, 1, RTC_AF | RTC_IRQF);
+	}
+
+	if (flagreg & RX8010_FLAG_UF) {
+		flagreg &= ~RX8010_FLAG_UF;
+		rtc_update_irq(rx8010->rtc, 1, RTC_UF | RTC_IRQF);
+	}
+
+	i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg);
+
+	mutex_unlock(&rx8010->rtc->ops_lock);
+	return IRQ_HANDLED;
+}
+
+static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	u8 date[7];
+	int flagreg;
+	int err;
+
+	flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
+	if (flagreg < 0)
+		return flagreg;
+
+	if (flagreg & RX8010_FLAG_VLF) {
+		dev_warn(dev, "Frequency stop detected\n");
+		return -EINVAL;
+	}
+
+	err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_SEC,
+					    7, date);
+	if (err != 7)
+		return err < 0 ? err : -EIO;
+
+	dt->tm_sec = bcd2bin(date[RX8010_SEC - RX8010_SEC] & 0x7f);
+	dt->tm_min = bcd2bin(date[RX8010_MIN - RX8010_SEC] & 0x7f);
+	dt->tm_hour = bcd2bin(date[RX8010_HOUR - RX8010_SEC] & 0x3f);
+	dt->tm_mday = bcd2bin(date[RX8010_MDAY - RX8010_SEC] & 0x3f);
+	dt->tm_mon = bcd2bin(date[RX8010_MONTH - RX8010_SEC] & 0x1f) - 1;
+	dt->tm_year = bcd2bin(date[RX8010_YEAR - RX8010_SEC]) + 100;
+	dt->tm_wday = ffs(date[RX8010_WDAY - RX8010_SEC] & 0x7f);
+
+	return rtc_valid_tm(dt);
+}
+
+static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	u8 date[7];
+	int ctrl, flagreg;
+	int ret;
+
+	if ((dt->tm_year < 100) || (dt->tm_year > 199))
+		return -EINVAL;
+
+	/* set STOP bit before changing clock/calendar */
+	ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+	rx8010->ctrlreg = ctrl | RX8010_CTRL_STOP;
+	ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
+					rx8010->ctrlreg);
+	if (ret < 0)
+		return ret;
+
+	date[RX8010_SEC - RX8010_SEC] = bin2bcd(dt->tm_sec);
+	date[RX8010_MIN - RX8010_SEC] = bin2bcd(dt->tm_min);
+	date[RX8010_HOUR - RX8010_SEC] = bin2bcd(dt->tm_hour);
+	date[RX8010_MDAY - RX8010_SEC] = bin2bcd(dt->tm_mday);
+	date[RX8010_MONTH - RX8010_SEC] = bin2bcd(dt->tm_mon + 1);
+	date[RX8010_YEAR - RX8010_SEC] = bin2bcd(dt->tm_year - 100);
+	date[RX8010_WDAY - RX8010_SEC] = bin2bcd(1 << dt->tm_wday);
+
+	ret = i2c_smbus_write_i2c_block_data(rx8010->client,
+					     RX8010_SEC, 7, date);
+	if (ret < 0)
+		return ret;
+
+	/* clear STOP bit after changing clock/calendar */
+	ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+	rx8010->ctrlreg = ctrl & ~RX8010_CTRL_STOP;
+	ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
+					rx8010->ctrlreg);
+	if (ret < 0)
+		return ret;
+
+	flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
+	if (flagreg < 0) {
+		return flagreg;
+	}
+
+	if (flagreg & RX8010_FLAG_VLF)
+		ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG,
+						flagreg & ~RX8010_FLAG_VLF);
+
+	return 0;
+}
+
+static int rx8010_init_client(struct i2c_client *client)
+{
+	struct rx8010_data *rx8010 = i2c_get_clientdata(client);
+	u8 ctrl[2];
+	int need_clear = 0, err = 0;
+
+	/* Initialize reserved registers as specified in datasheet */
+	err = i2c_smbus_write_byte_data(client, RX8010_RESV17, 0xD8);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(client, RX8010_RESV30, 0x00);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(client, RX8010_RESV31, 0x08);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(client, RX8010_IRQ, 0x00);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_FLAG,
+					    2, ctrl);
+	if (err != 2)
+		return err < 0 ? err : -EIO;
+
+	if (ctrl[0] & RX8010_FLAG_VLF)
+		dev_warn(&client->dev, "Frequency stop was detected\n");
+
+	if (ctrl[0] & RX8010_FLAG_AF) {
+		dev_warn(&client->dev, "Alarm was detected\n");
+		need_clear = 1;
+	}
+
+	if (ctrl[0] & RX8010_FLAG_TF)
+		need_clear = 1;
+
+	if (ctrl[0] & RX8010_FLAG_UF)
+		need_clear = 1;
+
+	if (need_clear) {
+		ctrl[0] &= ~(RX8010_FLAG_AF | RX8010_FLAG_TF | RX8010_FLAG_UF);
+		err = i2c_smbus_write_byte_data(client, RX8010_FLAG, ctrl[0]);
+		if (err < 0)
+			return err;
+	}
+
+	rx8010->ctrlreg = (ctrl[1] & ~RX8010_CTRL_TEST);
+
+	return err;
+}
+
+static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	struct i2c_client *client = rx8010->client;
+	u8 alarmvals[3];
+	int flagreg;
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(client, RX8010_ALMIN, 3, alarmvals);
+	if (err != 3)
+		return err < 0 ? err : -EIO;
+
+	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
+	if (flagreg < 0)
+		return flagreg;
+
+	t->time.tm_sec = 0;
+	t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
+	t->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
+
+	if (!(alarmvals[2] & RX8010_ALARM_AE))
+		t->time.tm_mday = bcd2bin(alarmvals[2] & 0x7f);
+
+	t->enabled = !!(rx8010->ctrlreg & RX8010_CTRL_AIE);
+	t->pending = (flagreg & RX8010_FLAG_AF) && t->enabled;
+
+	return err;
+}
+
+static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	u8 alarmvals[3];
+	int extreg, flagreg;
+	int err;
+
+	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
+	if (flagreg < 0) {
+		return flagreg;
+	}
+
+	if (rx8010->ctrlreg & (RX8010_CTRL_AIE | RX8010_CTRL_UIE)) {
+		rx8010->ctrlreg &= ~(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
+		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
+						rx8010->ctrlreg);
+		if (err < 0) {
+			return err;
+		}
+	}
+
+	flagreg &= ~RX8010_FLAG_AF;
+	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
+	if (err < 0)
+		return err;
+
+	alarmvals[0] = bin2bcd(t->time.tm_min);
+	alarmvals[1] = bin2bcd(t->time.tm_hour);
+	alarmvals[2] = bin2bcd(t->time.tm_mday);
+
+	err = i2c_smbus_write_i2c_block_data(rx8010->client, RX8010_ALMIN,
+					     2, alarmvals);
+	if (err < 0)
+		return err;
+
+	extreg = i2c_smbus_read_byte_data(client, RX8010_EXT);
+	if (extreg < 0)
+		return extreg;
+
+	extreg |= RX8010_EXT_WADA;
+	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_EXT, extreg);
+	if (err < 0)
+		return err;
+
+	if (alarmvals[2] == 0)
+		alarmvals[2] |= RX8010_ALARM_AE;
+
+	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_ALWDAY,
+					alarmvals[2]);
+	if (err < 0)
+		return err;
+
+	if (t->enabled) {
+		if (rx8010->rtc->uie_rtctimer.enabled)
+			rx8010->ctrlreg |= RX8010_CTRL_UIE;
+		if (rx8010->rtc->aie_timer.enabled)
+			rx8010->ctrlreg |=
+				(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
+
+		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
+						rx8010->ctrlreg);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rx8010_alarm_irq_enable(struct device *dev,
+				   unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	int flagreg;
+	u8 ctrl;
+	int err;
+
+	ctrl = rx8010->ctrlreg;
+
+	if (enabled) {
+		if (rx8010->rtc->uie_rtctimer.enabled)
+			ctrl |= RX8010_CTRL_UIE;
+		if (rx8010->rtc->aie_timer.enabled)
+			ctrl |= (RX8010_CTRL_AIE | RX8010_CTRL_UIE);
+	} else {
+		if (!rx8010->rtc->uie_rtctimer.enabled)
+			ctrl &= ~RX8010_CTRL_UIE;
+		if (!rx8010->rtc->aie_timer.enabled)
+			ctrl &= ~RX8010_CTRL_AIE;
+	}
+
+	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
+	if (flagreg < 0)
+		return flagreg;
+
+	flagreg &= ~RX8010_FLAG_AF;
+	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
+	if (err < 0)
+		return err;
+
+	if (ctrl != rx8010->ctrlreg) {
+		rx8010->ctrlreg = ctrl;
+		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
+						rx8010->ctrlreg);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
+	int ret, tmp;
+	int flagreg;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
+		if (flagreg < 0)
+			return flagreg;
+
+		tmp = !!(flagreg & RX8010_FLAG_VLF);
+		if (copy_to_user((void __user *)arg, &tmp, sizeof(int)))
+			return -EFAULT;
+
+		return 0;
+
+	case RTC_VL_CLR:
+		flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
+		if (flagreg < 0) {
+			return flagreg;
+		}
+
+		flagreg &= ~RX8010_FLAG_VLF;
+		ret = i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static struct rtc_class_ops rx8010_rtc_ops = {
+	.read_time = rx8010_get_time,
+	.set_time = rx8010_set_time,
+	.ioctl = rx8010_ioctl,
+};
+
+static int rx8010_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rx8010_data *rx8010;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+		| I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&adapter->dev, "doesn't support required functionality\n");
+		return -EIO;
+	}
+
+	rx8010 = devm_kzalloc(&client->dev, sizeof(struct rx8010_data),
+			      GFP_KERNEL);
+	if (!rx8010)
+		return -ENOMEM;
+
+	rx8010->client = client;
+	i2c_set_clientdata(client, rx8010);
+
+	err = rx8010_init_client(client);
+	if (err)
+		return err;
+
+	if (client->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
+		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+						rx8010_irq_1_handler,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						"rx8010", client);
+
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ\n");
+			client->irq = 0;
+		} else {
+			rx8010_rtc_ops.read_alarm = rx8010_read_alarm;
+			rx8010_rtc_ops.set_alarm = rx8010_set_alarm;
+			rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable;
+		}
+	}
+
+	rx8010->rtc = devm_rtc_device_register(&client->dev, client->name,
+		&rx8010_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rx8010->rtc)) {
+		dev_err(&client->dev, "unable to register the class device\n");
+		return PTR_ERR(rx8010->rtc);
+	}
+
+	rx8010->rtc->max_user_freq = 1;
+
+	return err;
+}
+
+static struct i2c_driver rx8010_driver = {
+	.driver = {
+		.name = "rtc-rx8010",
+		.of_match_table = of_match_ptr(rx8010_of_match),
+	},
+	.probe		= rx8010_probe,
+	.id_table	= rx8010_id,
+};
+
+module_i2c_driver(rx8010_driver);
+
+MODULE_AUTHOR("Akshay Bhat <akshay.bhat@timesys.com>");
+MODULE_DESCRIPTION("Epson RX8010SJ RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8025.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8025.c
new file mode 100644
index 0000000..91857d8
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8025.c
@@ -0,0 +1,587 @@
+/*
+ * Driver for Epson's RTC module RX-8025 SA/NB
+ *
+ * Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Copyright (C) 2005 by Digi International Inc.
+ * All rights reserved.
+ *
+ * Modified by fengjh at rising.com.cn
+ * <lm-sensors@lm-sensors.org>
+ * 2006.11
+ *
+ * Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com>
+ * Converted to new style by Wolfgang Grandegger <wg@grandegger.com>
+ * Alarm and periodic interrupt added by Dmitry Rakhchev <rda@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <linux/bcd.h>
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+/* Register definitions */
+#define RX8025_REG_SEC		0x00
+#define RX8025_REG_MIN		0x01
+#define RX8025_REG_HOUR		0x02
+#define RX8025_REG_WDAY		0x03
+#define RX8025_REG_MDAY		0x04
+#define RX8025_REG_MONTH	0x05
+#define RX8025_REG_YEAR		0x06
+#define RX8025_REG_DIGOFF	0x07
+#define RX8025_REG_ALWMIN	0x08
+#define RX8025_REG_ALWHOUR	0x09
+#define RX8025_REG_ALWWDAY	0x0a
+#define RX8025_REG_ALDMIN	0x0b
+#define RX8025_REG_ALDHOUR	0x0c
+/* 0x0d is reserved */
+#define RX8025_REG_CTRL1	0x0e
+#define RX8025_REG_CTRL2	0x0f
+
+#define RX8025_BIT_CTRL1_CT	(7 << 0)
+/* 1 Hz periodic level irq */
+#define RX8025_BIT_CTRL1_CT_1HZ	4
+#define RX8025_BIT_CTRL1_TEST	BIT(3)
+#define RX8025_BIT_CTRL1_1224	BIT(5)
+#define RX8025_BIT_CTRL1_DALE	BIT(6)
+#define RX8025_BIT_CTRL1_WALE	BIT(7)
+
+#define RX8025_BIT_CTRL2_DAFG	BIT(0)
+#define RX8025_BIT_CTRL2_WAFG	BIT(1)
+#define RX8025_BIT_CTRL2_CTFG	BIT(2)
+#define RX8025_BIT_CTRL2_PON	BIT(4)
+#define RX8025_BIT_CTRL2_XST	BIT(5)
+#define RX8025_BIT_CTRL2_VDET	BIT(6)
+
+/* Clock precision adjustment */
+#define RX8025_ADJ_RESOLUTION	3050 /* in ppb */
+#define RX8025_ADJ_DATA_MAX	62
+#define RX8025_ADJ_DATA_MIN	-62
+
+static const struct i2c_device_id rx8025_id[] = {
+	{ "rx8025", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rx8025_id);
+
+struct rx8025_data {
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+	u8 ctrl1;
+};
+
+static s32 rx8025_read_reg(const struct i2c_client *client, u8 number)
+{
+	return i2c_smbus_read_byte_data(client, number << 4);
+}
+
+static int rx8025_read_regs(const struct i2c_client *client,
+			    u8 number, u8 length, u8 *values)
+{
+	int ret = i2c_smbus_read_i2c_block_data(client, number << 4, length,
+						values);
+	if (ret != length)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static s32 rx8025_write_reg(const struct i2c_client *client, u8 number,
+			    u8 value)
+{
+	return i2c_smbus_write_byte_data(client, number << 4, value);
+}
+
+static s32 rx8025_write_regs(const struct i2c_client *client,
+			     u8 number, u8 length, const u8 *values)
+{
+	return i2c_smbus_write_i2c_block_data(client, number << 4,
+					      length, values);
+}
+
+static int rx8025_check_validity(struct device *dev)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	int ctrl2;
+
+	ctrl2 = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2);
+	if (ctrl2 < 0)
+		return ctrl2;
+
+	if (ctrl2 & RX8025_BIT_CTRL2_VDET)
+		dev_warn(dev, "power voltage drop detected\n");
+
+	if (ctrl2 & RX8025_BIT_CTRL2_PON) {
+		dev_warn(dev, "power-on reset detected, date is invalid\n");
+		return -EINVAL;
+	}
+
+	if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
+		dev_warn(dev, "crystal stopped, date is invalid\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rx8025_reset_validity(struct i2c_client *client)
+{
+	int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
+
+	if (ctrl2 < 0)
+		return ctrl2;
+
+	ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
+
+	return rx8025_write_reg(client, RX8025_REG_CTRL2,
+				ctrl2 | RX8025_BIT_CTRL2_XST);
+}
+
+static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	struct mutex *lock = &rx8025->rtc->ops_lock;
+	int status;
+
+	mutex_lock(lock);
+	status = rx8025_read_reg(client, RX8025_REG_CTRL2);
+	if (status < 0)
+		goto out;
+
+	if (!(status & RX8025_BIT_CTRL2_XST))
+		dev_warn(&client->dev, "Oscillation stop was detected,"
+			 "you may have to readjust the clock\n");
+
+	if (status & RX8025_BIT_CTRL2_CTFG) {
+		/* periodic */
+		status &= ~RX8025_BIT_CTRL2_CTFG;
+		rtc_update_irq(rx8025->rtc, 1, RTC_PF | RTC_IRQF);
+	}
+
+	if (status & RX8025_BIT_CTRL2_DAFG) {
+		/* alarm */
+		status &= RX8025_BIT_CTRL2_DAFG;
+		if (rx8025_write_reg(client, RX8025_REG_CTRL1,
+				     rx8025->ctrl1 & ~RX8025_BIT_CTRL1_DALE))
+			goto out;
+		rtc_update_irq(rx8025->rtc, 1, RTC_AF | RTC_IRQF);
+	}
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 date[7];
+	int err;
+
+	err = rx8025_check_validity(dev);
+	if (err)
+		return err;
+
+	err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "%s: read 0x%02x 0x%02x "
+		"0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", __func__,
+		date[0], date[1], date[2], date[3], date[4],
+		date[5], date[6]);
+
+	dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
+	dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
+	else
+		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
+			+ (date[RX8025_REG_HOUR] & 0x20 ? 12 : 0);
+
+	dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f);
+	dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1;
+	dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]) + 100;
+
+	dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+		dt->tm_sec, dt->tm_min, dt->tm_hour,
+		dt->tm_mday, dt->tm_mon, dt->tm_year);
+
+	return rtc_valid_tm(dt);
+}
+
+static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 date[7];
+	int ret;
+
+	if ((dt->tm_year < 100) || (dt->tm_year > 199))
+		return -EINVAL;
+
+	/*
+	 * Here the read-only bits are written as "0".  I'm not sure if that
+	 * is sound.
+	 */
+	date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
+	date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
+	else
+		date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
+			| bin2bcd((dt->tm_hour + 11) % 12 + 1);
+
+	date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday);
+	date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday);
+	date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1);
+	date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year - 100);
+
+	dev_dbg(dev,
+		"%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+		__func__,
+		date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+	ret = rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+	if (ret < 0)
+		return ret;
+
+	return rx8025_reset_validity(rx8025->client);
+}
+
+static int rx8025_init_client(struct i2c_client *client)
+{
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	u8 ctrl[2], ctrl2;
+	int need_clear = 0;
+	int err;
+
+	err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl);
+	if (err)
+		goto out;
+
+	/* Keep test bit zero ! */
+	rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST;
+
+	if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) {
+		dev_warn(&client->dev, "Alarm was detected\n");
+		need_clear = 1;
+	}
+
+	if (ctrl[1] & RX8025_BIT_CTRL2_CTFG)
+		need_clear = 1;
+
+	if (need_clear) {
+		ctrl2 = ctrl[1];
+		ctrl2 &= ~(RX8025_BIT_CTRL2_CTFG | RX8025_BIT_CTRL2_WAFG |
+			   RX8025_BIT_CTRL2_DAFG);
+
+		err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
+	}
+out:
+	return err;
+}
+
+/* Alarm support */
+static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	struct i2c_client *client = rx8025->client;
+	u8 ald[2];
+	int ctrl2, err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	err = rx8025_read_regs(client, RX8025_REG_ALDMIN, 2, ald);
+	if (err)
+		return err;
+
+	ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
+	if (ctrl2 < 0)
+		return ctrl2;
+
+	dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n",
+		__func__, ald[0], ald[1], ctrl2);
+
+	/* Hardware alarms precision is 1 minute! */
+	t->time.tm_sec = 0;
+	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
+	else
+		t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
+			+ (ald[1] & 0x20 ? 12 : 0);
+
+	dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
+		__func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_mday, t->time.tm_mon, t->time.tm_year);
+	t->enabled = !!(rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE);
+	t->pending = (ctrl2 & RX8025_BIT_CTRL2_DAFG) && t->enabled;
+
+	return err;
+}
+
+static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 ald[2];
+	int err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	/*
+	 * Hardware alarm precision is 1 minute!
+	 * round up to nearest minute
+	 */
+	if (t->time.tm_sec) {
+		time64_t alarm_time = rtc_tm_to_time64(&t->time);
+
+		alarm_time += 60 - t->time.tm_sec;
+		rtc_time64_to_tm(alarm_time, &t->time);
+	}
+
+	ald[0] = bin2bcd(t->time.tm_min);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		ald[1] = bin2bcd(t->time.tm_hour);
+	else
+		ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
+			| bin2bcd((t->time.tm_hour + 11) % 12 + 1);
+
+	dev_dbg(dev, "%s: write 0x%02x 0x%02x\n", __func__, ald[0], ald[1]);
+
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) {
+		rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+	err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald);
+	if (err)
+		return err;
+
+	if (t->enabled) {
+		rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 ctrl1;
+	int err;
+
+	ctrl1 = rx8025->ctrl1;
+	if (enabled)
+		ctrl1 |= RX8025_BIT_CTRL1_DALE;
+	else
+		ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
+
+	if (ctrl1 != rx8025->ctrl1) {
+		rx8025->ctrl1 = ctrl1;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static const struct rtc_class_ops rx8025_rtc_ops = {
+	.read_time = rx8025_get_time,
+	.set_time = rx8025_set_time,
+	.read_alarm = rx8025_read_alarm,
+	.set_alarm = rx8025_set_alarm,
+	.alarm_irq_enable = rx8025_alarm_irq_enable,
+};
+
+/*
+ * Clock precision adjustment support
+ *
+ * According to the RX8025 SA/NB application manual the frequency and
+ * temperature characteristics can be approximated using the following
+ * equation:
+ *
+ *   df = a * (ut - t)**2
+ *
+ *   df: Frequency deviation in any temperature
+ *   a : Coefficient = (-35 +-5) * 10**-9
+ *   ut: Ultimate temperature in degree = +25 +-5 degree
+ *   t : Any temperature in degree
+ *
+ * Note that the clock adjustment in ppb must be entered (which is
+ * the negative value of the deviation).
+ */
+static int rx8025_get_clock_adjust(struct device *dev, int *adj)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int digoff;
+
+	digoff = rx8025_read_reg(client, RX8025_REG_DIGOFF);
+	if (digoff < 0)
+		return digoff;
+
+	*adj = digoff >= 64 ? digoff - 128 : digoff;
+	if (*adj > 0)
+		(*adj)--;
+	*adj *= -RX8025_ADJ_RESOLUTION;
+
+	return 0;
+}
+
+static int rx8025_set_clock_adjust(struct device *dev, int adj)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 digoff;
+	int err;
+
+	adj /= -RX8025_ADJ_RESOLUTION;
+	if (adj > RX8025_ADJ_DATA_MAX)
+		adj = RX8025_ADJ_DATA_MAX;
+	else if (adj < RX8025_ADJ_DATA_MIN)
+		adj = RX8025_ADJ_DATA_MIN;
+	else if (adj > 0)
+		adj++;
+	else if (adj < 0)
+		adj += 128;
+	digoff = adj;
+
+	err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff);
+
+	return 0;
+}
+
+static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	int err, adj;
+
+	err = rx8025_get_clock_adjust(dev, &adj);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d\n", adj);
+}
+
+static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf, size_t count)
+{
+	int adj, err;
+
+	if (sscanf(buf, "%i", &adj) != 1)
+		return -EINVAL;
+
+	err = rx8025_set_clock_adjust(dev, adj);
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(clock_adjust_ppb, S_IRUGO | S_IWUSR,
+		   rx8025_sysfs_show_clock_adjust,
+		   rx8025_sysfs_store_clock_adjust);
+
+static int rx8025_sysfs_register(struct device *dev)
+{
+	return device_create_file(dev, &dev_attr_clock_adjust_ppb);
+}
+
+static void rx8025_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_clock_adjust_ppb);
+}
+
+static int rx8025_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rx8025_data *rx8025;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&adapter->dev,
+			"doesn't support required functionality\n");
+		return -EIO;
+	}
+
+	rx8025 = devm_kzalloc(&client->dev, sizeof(*rx8025), GFP_KERNEL);
+	if (!rx8025)
+		return -ENOMEM;
+
+	rx8025->client = client;
+	i2c_set_clientdata(client, rx8025);
+
+	err = rx8025_init_client(client);
+	if (err)
+		return err;
+
+	rx8025->rtc = devm_rtc_device_register(&client->dev, client->name,
+					  &rx8025_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rx8025->rtc)) {
+		dev_err(&client->dev, "unable to register the class device\n");
+		return PTR_ERR(rx8025->rtc);
+	}
+
+	if (client->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
+		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+						rx8025_handle_irq,
+						IRQF_ONESHOT,
+						"rx8025", client);
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
+			client->irq = 0;
+		}
+	}
+
+	rx8025->rtc->max_user_freq = 1;
+
+	/* the rx8025 alarm only supports a minute accuracy */
+	rx8025->rtc->uie_unsupported = 1;
+
+	err = rx8025_sysfs_register(&client->dev);
+	return err;
+}
+
+static int rx8025_remove(struct i2c_client *client)
+{
+	rx8025_sysfs_unregister(&client->dev);
+	return 0;
+}
+
+static struct i2c_driver rx8025_driver = {
+	.driver = {
+		.name = "rtc-rx8025",
+	},
+	.probe		= rx8025_probe,
+	.remove		= rx8025_remove,
+	.id_table	= rx8025_id,
+};
+
+module_i2c_driver(rx8025_driver);
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("RX-8025 SA/NB RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8581.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8581.c
new file mode 100644
index 0000000..9998d79
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-rx8581.c
@@ -0,0 +1,330 @@
+/*
+ * An I2C driver for the Epson RX8581 RTC
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
+ * Copyright 2005-06 Tower Technologies
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/log2.h>
+
+#define RX8581_REG_SC		0x00 /* Second in BCD */
+#define RX8581_REG_MN		0x01 /* Minute in BCD */
+#define RX8581_REG_HR		0x02 /* Hour in BCD */
+#define RX8581_REG_DW		0x03 /* Day of Week */
+#define RX8581_REG_DM		0x04 /* Day of Month in BCD */
+#define RX8581_REG_MO		0x05 /* Month in BCD */
+#define RX8581_REG_YR		0x06 /* Year in BCD */
+#define RX8581_REG_RAM		0x07 /* RAM */
+#define RX8581_REG_AMN		0x08 /* Alarm Min in BCD*/
+#define RX8581_REG_AHR		0x09 /* Alarm Hour in BCD */
+#define RX8581_REG_ADM		0x0A
+#define RX8581_REG_ADW		0x0A
+#define RX8581_REG_TMR0		0x0B
+#define RX8581_REG_TMR1		0x0C
+#define RX8581_REG_EXT		0x0D /* Extension Register */
+#define RX8581_REG_FLAG		0x0E /* Flag Register */
+#define RX8581_REG_CTRL		0x0F /* Control Register */
+
+
+/* Flag Register bit definitions */
+#define RX8581_FLAG_UF		0x20 /* Update */
+#define RX8581_FLAG_TF		0x10 /* Timer */
+#define RX8581_FLAG_AF		0x08 /* Alarm */
+#define RX8581_FLAG_VLF		0x02 /* Voltage Low */
+
+/* Control Register bit definitions */
+#define RX8581_CTRL_UIE		0x20 /* Update Interrupt Enable */
+#define RX8581_CTRL_TIE		0x10 /* Timer Interrupt Enable */
+#define RX8581_CTRL_AIE		0x08 /* Alarm Interrupt Enable */
+#define RX8581_CTRL_STOP	0x02 /* STOP bit */
+#define RX8581_CTRL_RESET	0x01 /* RESET bit */
+
+struct rx8581 {
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+	s32 (*read_block_data)(const struct i2c_client *client, u8 command,
+				u8 length, u8 *values);
+	s32 (*write_block_data)(const struct i2c_client *client, u8 command,
+				u8 length, const u8 *values);
+};
+
+static struct i2c_driver rx8581_driver;
+
+static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
+					u8 length, u8 *values)
+{
+	s32 i, data;
+
+	for (i = 0; i < length; i++) {
+		data = i2c_smbus_read_byte_data(client, command + i);
+		if (data < 0)
+			return data;
+		values[i] = data;
+	}
+	return i;
+}
+
+static int rx8581_write_block_data(const struct i2c_client *client, u8 command,
+					u8 length, const u8 *values)
+{
+	s32 i, ret;
+
+	for (i = 0; i < length; i++) {
+		ret = i2c_smbus_write_byte_data(client, command + i,
+						values[i]);
+		if (ret < 0)
+			return ret;
+	}
+	return length;
+}
+
+/*
+ * In the routines that deal directly with the rx8581 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	unsigned char date[7];
+	int data, err;
+	struct rx8581 *rx8581 = i2c_get_clientdata(client);
+
+	/* First we ensure that the "update flag" is not set, we read the
+	 * time and date then re-read the "update flag". If the update flag
+	 * has been set, we know that the time has changed during the read so
+	 * we repeat the whole process again.
+	 */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read device flags\n");
+		return -EIO;
+	}
+
+	do {
+		/* If update flag set, clear it */
+		if (data & RX8581_FLAG_UF) {
+			err = i2c_smbus_write_byte_data(client,
+				RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
+			if (err != 0) {
+				dev_err(&client->dev, "Unable to write device flags\n");
+				return -EIO;
+			}
+		}
+
+		/* Now read time and date */
+		err = rx8581->read_block_data(client, RX8581_REG_SC,
+			7, date);
+		if (err < 0) {
+			dev_err(&client->dev, "Unable to read date\n");
+			return -EIO;
+		}
+
+		/* Check flag register */
+		data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+		if (data < 0) {
+			dev_err(&client->dev, "Unable to read device flags\n");
+			return -EIO;
+		}
+	} while (data & RX8581_FLAG_UF);
+
+	if (data & RX8581_FLAG_VLF)
+		dev_info(&client->dev,
+			"low voltage detected, date/time is not reliable.\n");
+
+	dev_dbg(&client->dev,
+		"%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+		"wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
+		__func__,
+		date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+	tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
+	tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
+	tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
+	if (tm->tm_year < 70)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	err = rtc_valid_tm(tm);
+	if (err < 0)
+		dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+	return err;
+}
+
+static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	int data, err;
+	unsigned char buf[7];
+	struct rx8581 *rx8581 = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* hours, minutes and seconds */
+	buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
+	buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
+
+	buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
+	buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
+
+	/* Stop the clock */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+		(data | RX8581_CTRL_STOP));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	/* write register's data */
+	err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write to date registers\n");
+		return -EIO;
+	}
+
+	/* get VLF and clear it */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read flag register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+		(data & ~(RX8581_FLAG_VLF)));
+	if (err != 0) {
+		dev_err(&client->dev, "Unable to write flag register\n");
+		return -EIO;
+	}
+
+	/* Restart the clock */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+		(data & ~(RX8581_CTRL_STOP)));
+	if (err != 0) {
+		dev_err(&client->dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return rx8581_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return rx8581_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops rx8581_rtc_ops = {
+	.read_time	= rx8581_rtc_read_time,
+	.set_time	= rx8581_rtc_set_time,
+};
+
+static int rx8581_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct rx8581	  *rx8581;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)
+		&& !i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EIO;
+
+	rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581), GFP_KERNEL);
+	if (!rx8581)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, rx8581);
+	rx8581->client = client;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		rx8581->read_block_data = i2c_smbus_read_i2c_block_data;
+		rx8581->write_block_data = i2c_smbus_write_i2c_block_data;
+	} else {
+		rx8581->read_block_data = rx8581_read_block_data;
+		rx8581->write_block_data = rx8581_write_block_data;
+	}
+
+	rx8581->rtc = devm_rtc_device_register(&client->dev,
+		rx8581_driver.driver.name, &rx8581_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rx8581->rtc)) {
+		dev_err(&client->dev,
+			"unable to register the class device\n");
+		return PTR_ERR(rx8581->rtc);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id rx8581_id[] = {
+	{ "rx8581", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rx8581_id);
+
+static const struct of_device_id rx8581_of_match[] = {
+	{ .compatible = "epson,rx8581" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rx8581_of_match);
+
+static struct i2c_driver rx8581_driver = {
+	.driver		= {
+		.name	= "rtc-rx8581",
+		.of_match_table = of_match_ptr(rx8581_of_match),
+	},
+	.probe		= rx8581_probe,
+	.id_table	= rx8581_id,
+};
+
+module_i2c_driver(rx8581_driver);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
+MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-s35390a.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-s35390a.c
new file mode 100644
index 0000000..6bfff0a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-s35390a.c
@@ -0,0 +1,565 @@
+/*
+ * Seiko Instruments S-35390A RTC Driver
+ *
+ * Copyright (c) 2007 Byron Bradley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bitrev.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#define S35390A_CMD_STATUS1	0
+#define S35390A_CMD_STATUS2	1
+#define S35390A_CMD_TIME1	2
+#define S35390A_CMD_TIME2	3
+#define S35390A_CMD_INT2_REG1	5
+
+#define S35390A_BYTE_YEAR	0
+#define S35390A_BYTE_MONTH	1
+#define S35390A_BYTE_DAY	2
+#define S35390A_BYTE_WDAY	3
+#define S35390A_BYTE_HOURS	4
+#define S35390A_BYTE_MINS	5
+#define S35390A_BYTE_SECS	6
+
+#define S35390A_ALRM_BYTE_WDAY	0
+#define S35390A_ALRM_BYTE_HOURS	1
+#define S35390A_ALRM_BYTE_MINS	2
+
+/* flags for STATUS1 */
+#define S35390A_FLAG_POC	0x01
+#define S35390A_FLAG_BLD	0x02
+#define S35390A_FLAG_INT2	0x04
+#define S35390A_FLAG_24H	0x40
+#define S35390A_FLAG_RESET	0x80
+
+/* flag for STATUS2 */
+#define S35390A_FLAG_TEST	0x01
+
+#define S35390A_INT2_MODE_MASK		0xF0
+
+#define S35390A_INT2_MODE_NOINTR	0x00
+#define S35390A_INT2_MODE_FREQ		0x10
+#define S35390A_INT2_MODE_ALARM		0x40
+#define S35390A_INT2_MODE_PMIN_EDG	0x20
+
+static const struct i2c_device_id s35390a_id[] = {
+	{ "s35390a", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, s35390a_id);
+
+static const struct of_device_id s35390a_of_match[] = {
+	{ .compatible = "s35390a" },
+	{ .compatible = "sii,s35390a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s35390a_of_match);
+
+struct s35390a {
+	struct i2c_client *client[8];
+	struct rtc_device *rtc;
+	int twentyfourhour;
+};
+
+static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+	struct i2c_client *client = s35390a->client[reg];
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.len = len,
+			.buf = buf
+		},
+	};
+
+	if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+	struct i2c_client *client = s35390a->client[reg];
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = buf
+		},
+	};
+
+	if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static int s35390a_init(struct s35390a *s35390a)
+{
+	u8 buf;
+	int ret;
+	unsigned initcount = 0;
+
+	/*
+	 * At least one of POC and BLD are set, so reinitialise chip. Keeping
+	 * this information in the hardware to know later that the time isn't
+	 * valid is unfortunately not possible because POC and BLD are cleared
+	 * on read. So the reset is best done now.
+	 *
+	 * The 24H bit is kept over reset, so set it already here.
+	 */
+initialize:
+	buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
+	ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+
+	if (ret < 0)
+		return ret;
+
+	ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+	if (ret < 0)
+		return ret;
+
+	if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) {
+		/* Try up to five times to reset the chip */
+		if (initcount < 5) {
+			++initcount;
+			goto initialize;
+		} else
+			return -EIO;
+	}
+
+	return 1;
+}
+
+/*
+ * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset.
+ * To keep the information if an irq is pending, pass the value read from
+ * STATUS1 to the caller.
+ */
+static int s35390a_read_status(struct s35390a *s35390a, char *status1)
+{
+	int ret;
+
+	ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1);
+	if (ret < 0)
+		return ret;
+
+	if (*status1 & S35390A_FLAG_POC) {
+		/*
+		 * Do not communicate for 0.5 seconds since the power-on
+		 * detection circuit is in operation.
+		 */
+		msleep(500);
+		return 1;
+	} else if (*status1 & S35390A_FLAG_BLD)
+		return 1;
+	/*
+	 * If both POC and BLD are unset everything is fine.
+	 */
+	return 0;
+}
+
+static int s35390a_disable_test_mode(struct s35390a *s35390a)
+{
+	char buf[1];
+
+	if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
+		return -EIO;
+
+	if (!(buf[0] & S35390A_FLAG_TEST))
+		return 0;
+
+	buf[0] &= ~S35390A_FLAG_TEST;
+	return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
+}
+
+static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
+{
+	if (s35390a->twentyfourhour)
+		return bin2bcd(hour);
+
+	if (hour < 12)
+		return bin2bcd(hour);
+
+	return 0x40 | bin2bcd(hour - 12);
+}
+
+static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
+{
+	unsigned hour;
+
+	if (s35390a->twentyfourhour)
+		return bcd2bin(reg & 0x3f);
+
+	hour = bcd2bin(reg & 0x3f);
+	if (reg & 0x40)
+		hour += 12;
+
+	return hour;
+}
+
+static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct s35390a	*s35390a = i2c_get_clientdata(client);
+	int i, err;
+	char buf[7], status;
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
+		"mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+		tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_wday);
+
+	if (s35390a_read_status(s35390a, &status) == 1)
+		s35390a_init(s35390a);
+
+	buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100);
+	buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1);
+	buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
+	buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
+	buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
+	buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
+	buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
+
+	/* This chip expects the bits of each byte to be in reverse order */
+	for (i = 0; i < 7; ++i)
+		buf[i] = bitrev8(buf[i]);
+
+	err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+
+	return err;
+}
+
+static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	struct s35390a *s35390a = i2c_get_clientdata(client);
+	char buf[7], status;
+	int i, err;
+
+	if (s35390a_read_status(s35390a, &status) == 1)
+		return -EINVAL;
+
+	err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+	if (err < 0)
+		return err;
+
+	/* This chip returns the bits of each byte in reverse order */
+	for (i = 0; i < 7; ++i)
+		buf[i] = bitrev8(buf[i]);
+
+	tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]);
+	tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]);
+	tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
+	tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]);
+	tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]);
+	tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1;
+	tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100;
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
+		"mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+		tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
+{
+	struct s35390a *s35390a = i2c_get_clientdata(client);
+	char buf[3], sts = 0;
+	int err, i;
+
+	dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d mday=%d, "\
+		"mon=%d, year=%d, wday=%d\n", __func__, alm->time.tm_sec,
+		alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
+		alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
+
+	/* disable interrupt (which deasserts the irq line) */
+	err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+	if (err < 0)
+		return err;
+
+	/* clear pending interrupt (in STATUS1 only), if any */
+	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
+	if (err < 0)
+		return err;
+
+	if (alm->enabled)
+		sts = S35390A_INT2_MODE_ALARM;
+	else
+		sts = S35390A_INT2_MODE_NOINTR;
+
+	/* This chip expects the bits of each byte to be in reverse order */
+	sts = bitrev8(sts);
+
+	/* set interupt mode*/
+	err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+	if (err < 0)
+		return err;
+
+	if (alm->time.tm_wday != -1)
+		buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
+	else
+		buf[S35390A_ALRM_BYTE_WDAY] = 0;
+
+	buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
+			alm->time.tm_hour) | 0x80;
+	buf[S35390A_ALRM_BYTE_MINS] = bin2bcd(alm->time.tm_min) | 0x80;
+
+	if (alm->time.tm_hour >= 12)
+		buf[S35390A_ALRM_BYTE_HOURS] |= 0x40;
+
+	for (i = 0; i < 3; ++i)
+		buf[i] = bitrev8(buf[i]);
+
+	err = s35390a_set_reg(s35390a, S35390A_CMD_INT2_REG1, buf,
+								sizeof(buf));
+
+	return err;
+}
+
+static int s35390a_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
+{
+	struct s35390a *s35390a = i2c_get_clientdata(client);
+	char buf[3], sts;
+	int i, err;
+
+	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+	if (err < 0)
+		return err;
+
+	if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+		/*
+		 * When the alarm isn't enabled, the register to configure
+		 * the alarm time isn't accessible.
+		 */
+		alm->enabled = 0;
+		return 0;
+	} else {
+		alm->enabled = 1;
+	}
+
+	err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf));
+	if (err < 0)
+		return err;
+
+	/* This chip returns the bits of each byte in reverse order */
+	for (i = 0; i < 3; ++i)
+		buf[i] = bitrev8(buf[i]);
+
+	/*
+	 * B0 of the three matching registers is an enable flag. Iff it is set
+	 * the configured value is used for matching.
+	 */
+	if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80)
+		alm->time.tm_wday =
+			bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80);
+
+	if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80)
+		alm->time.tm_hour =
+			s35390a_reg2hr(s35390a,
+				       buf[S35390A_ALRM_BYTE_HOURS] & ~0x80);
+
+	if (buf[S35390A_ALRM_BYTE_MINS] & 0x80)
+		alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80);
+
+	/* alarm triggers always at s=0 */
+	alm->time.tm_sec = 0;
+
+	dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
+			__func__, alm->time.tm_min, alm->time.tm_hour,
+			alm->time.tm_wday);
+
+	return 0;
+}
+
+static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	return s35390a_read_alarm(to_i2c_client(dev), alm);
+}
+
+static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	return s35390a_set_alarm(to_i2c_client(dev), alm);
+}
+
+static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return s35390a_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return s35390a_set_datetime(to_i2c_client(dev), tm);
+}
+
+static int s35390a_rtc_ioctl(struct device *dev, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct s35390a *s35390a = i2c_get_clientdata(client);
+	char sts;
+	int err;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		/* s35390a_reset set lowvoltage flag and init RTC if needed */
+		err = s35390a_read_status(s35390a, &sts);
+		if (err < 0)
+			return err;
+		if (copy_to_user((void __user *)arg, &err, sizeof(int)))
+			return -EFAULT;
+		break;
+	case RTC_VL_CLR:
+		/* update flag and clear register */
+		err = s35390a_init(s35390a);
+		if (err < 0)
+			return err;
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops s35390a_rtc_ops = {
+	.read_time	= s35390a_rtc_read_time,
+	.set_time	= s35390a_rtc_set_time,
+	.set_alarm	= s35390a_rtc_set_alarm,
+	.read_alarm	= s35390a_rtc_read_alarm,
+	.ioctl          = s35390a_rtc_ioctl,
+};
+
+static struct i2c_driver s35390a_driver;
+
+static int s35390a_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	int err, err_read;
+	unsigned int i;
+	struct s35390a *s35390a;
+	struct rtc_time tm;
+	char buf, status1;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	s35390a = devm_kzalloc(&client->dev, sizeof(struct s35390a),
+				GFP_KERNEL);
+	if (!s35390a) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	s35390a->client[0] = client;
+	i2c_set_clientdata(client, s35390a);
+
+	/* This chip uses multiple addresses, use dummy devices for them */
+	for (i = 1; i < 8; ++i) {
+		s35390a->client[i] = i2c_new_dummy(client->adapter,
+					client->addr + i);
+		if (!s35390a->client[i]) {
+			dev_err(&client->dev, "Address %02x unavailable\n",
+						client->addr + i);
+			err = -EBUSY;
+			goto exit_dummy;
+		}
+	}
+
+	err_read = s35390a_read_status(s35390a, &status1);
+	if (err_read < 0) {
+		err = err_read;
+		dev_err(&client->dev, "error resetting chip\n");
+		goto exit_dummy;
+	}
+
+	if (status1 & S35390A_FLAG_24H)
+		s35390a->twentyfourhour = 1;
+	else
+		s35390a->twentyfourhour = 0;
+
+	if (status1 & S35390A_FLAG_INT2) {
+		/* disable alarm (and maybe test mode) */
+		buf = 0;
+		err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling alarm");
+			goto exit_dummy;
+		}
+	} else {
+		err = s35390a_disable_test_mode(s35390a);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling test mode\n");
+			goto exit_dummy;
+		}
+	}
+
+	if (err_read > 0 || s35390a_get_datetime(client, &tm) < 0)
+		dev_warn(&client->dev, "clock needs to be set\n");
+
+	device_set_wakeup_capable(&client->dev, 1);
+
+	s35390a->rtc = devm_rtc_device_register(&client->dev,
+					s35390a_driver.driver.name,
+					&s35390a_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(s35390a->rtc)) {
+		err = PTR_ERR(s35390a->rtc);
+		goto exit_dummy;
+	}
+
+	if (status1 & S35390A_FLAG_INT2)
+		rtc_update_irq(s35390a->rtc, 1, RTC_AF);
+
+	return 0;
+
+exit_dummy:
+	for (i = 1; i < 8; ++i)
+		if (s35390a->client[i])
+			i2c_unregister_device(s35390a->client[i]);
+
+exit:
+	return err;
+}
+
+static int s35390a_remove(struct i2c_client *client)
+{
+	unsigned int i;
+	struct s35390a *s35390a = i2c_get_clientdata(client);
+
+	for (i = 1; i < 8; ++i)
+		if (s35390a->client[i])
+			i2c_unregister_device(s35390a->client[i]);
+
+	return 0;
+}
+
+static struct i2c_driver s35390a_driver = {
+	.driver		= {
+		.name	= "rtc-s35390a",
+		.of_match_table = of_match_ptr(s35390a_of_match),
+	},
+	.probe		= s35390a_probe,
+	.remove		= s35390a_remove,
+	.id_table	= s35390a_id,
+};
+
+module_i2c_driver(s35390a_driver);
+
+MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
+MODULE_DESCRIPTION("S35390A RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.c
new file mode 100644
index 0000000..4120a30
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.c
@@ -0,0 +1,876 @@
+/* drivers/rtc/rtc-s3c.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks, <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410/S3C2440/S3C24XX Internal RTC Driver
+*/
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include "rtc-s3c.h"
+
+struct s3c_rtc {
+	struct device *dev;
+	struct rtc_device *rtc;
+
+	void __iomem *base;
+	struct clk *rtc_clk;
+	struct clk *rtc_src_clk;
+	bool clk_disabled;
+
+	const struct s3c_rtc_data *data;
+
+	int irq_alarm;
+	int irq_tick;
+
+	spinlock_t pie_lock;
+	spinlock_t alarm_clk_lock;
+
+	int ticnt_save;
+	int ticnt_en_save;
+	bool wake_en;
+};
+
+struct s3c_rtc_data {
+	int max_user_freq;
+	bool needs_src_clk;
+
+	void (*irq_handler) (struct s3c_rtc *info, int mask);
+	void (*set_freq) (struct s3c_rtc *info, int freq);
+	void (*enable_tick) (struct s3c_rtc *info, struct seq_file *seq);
+	void (*select_tick_clk) (struct s3c_rtc *info);
+	void (*save_tick_cnt) (struct s3c_rtc *info);
+	void (*restore_tick_cnt) (struct s3c_rtc *info);
+	void (*enable) (struct s3c_rtc *info);
+	void (*disable) (struct s3c_rtc *info);
+};
+
+static int s3c_rtc_enable_clk(struct s3c_rtc *info)
+{
+	unsigned long irq_flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&info->alarm_clk_lock, irq_flags);
+
+	if (info->clk_disabled) {
+		ret = clk_enable(info->rtc_clk);
+		if (ret)
+			goto out;
+
+		if (info->data->needs_src_clk) {
+			ret = clk_enable(info->rtc_src_clk);
+			if (ret) {
+				clk_disable(info->rtc_clk);
+				goto out;
+			}
+		}
+		info->clk_disabled = false;
+	}
+
+out:
+	spin_unlock_irqrestore(&info->alarm_clk_lock, irq_flags);
+
+	return ret;
+}
+
+static void s3c_rtc_disable_clk(struct s3c_rtc *info)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&info->alarm_clk_lock, irq_flags);
+	if (!info->clk_disabled) {
+		if (info->data->needs_src_clk)
+			clk_disable(info->rtc_src_clk);
+		clk_disable(info->rtc_clk);
+		info->clk_disabled = true;
+	}
+	spin_unlock_irqrestore(&info->alarm_clk_lock, irq_flags);
+}
+
+/* IRQ Handlers */
+static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
+{
+	struct s3c_rtc *info = (struct s3c_rtc *)id;
+
+	if (info->data->irq_handler)
+		info->data->irq_handler(info, S3C2410_INTP_TIC);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
+{
+	struct s3c_rtc *info = (struct s3c_rtc *)id;
+
+	if (info->data->irq_handler)
+		info->data->irq_handler(info, S3C2410_INTP_ALM);
+
+	return IRQ_HANDLED;
+}
+
+/* Update control registers */
+static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	unsigned int tmp;
+	int ret;
+
+	dev_dbg(info->dev, "%s: aie=%d\n", __func__, enabled);
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	tmp = readb(info->base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
+
+	if (enabled)
+		tmp |= S3C2410_RTCALM_ALMEN;
+
+	writeb(tmp, info->base + S3C2410_RTCALM);
+
+	s3c_rtc_disable_clk(info);
+
+	if (enabled) {
+		ret = s3c_rtc_enable_clk(info);
+		if (ret)
+			return ret;
+	} else {
+		s3c_rtc_disable_clk(info);
+	}
+
+	return 0;
+}
+
+/* Set RTC frequency */
+static int s3c_rtc_setfreq(struct s3c_rtc *info, int freq)
+{
+	int ret;
+
+	if (!is_power_of_2(freq))
+		return -EINVAL;
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+	spin_lock_irq(&info->pie_lock);
+
+	if (info->data->set_freq)
+		info->data->set_freq(info, freq);
+
+	spin_unlock_irq(&info->pie_lock);
+	s3c_rtc_disable_clk(info);
+
+	return 0;
+}
+
+/* Time read/write */
+static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	unsigned int have_retried = 0;
+	int ret;
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+retry_get_time:
+	rtc_tm->tm_min  = readb(info->base + S3C2410_RTCMIN);
+	rtc_tm->tm_hour = readb(info->base + S3C2410_RTCHOUR);
+	rtc_tm->tm_mday = readb(info->base + S3C2410_RTCDATE);
+	rtc_tm->tm_mon  = readb(info->base + S3C2410_RTCMON);
+	rtc_tm->tm_year = readb(info->base + S3C2410_RTCYEAR);
+	rtc_tm->tm_sec  = readb(info->base + S3C2410_RTCSEC);
+
+	/* the only way to work out whether the system was mid-update
+	 * when we read it is to check the second counter, and if it
+	 * is zero, then we re-try the entire read
+	 */
+
+	if (rtc_tm->tm_sec == 0 && !have_retried) {
+		have_retried = 1;
+		goto retry_get_time;
+	}
+
+	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
+	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
+	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
+	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
+	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
+	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
+
+	s3c_rtc_disable_clk(info);
+
+	rtc_tm->tm_year += 100;
+
+	dev_dbg(dev, "read time %04d.%02d.%02d %02d:%02d:%02d\n",
+		1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+		rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+	rtc_tm->tm_mon -= 1;
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	int year = tm->tm_year - 100;
+	int ret;
+
+	dev_dbg(dev, "set time %04d.%02d.%02d %02d:%02d:%02d\n",
+		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	/* we get around y2k by simply not supporting it */
+
+	if (year < 0 || year >= 100) {
+		dev_err(dev, "rtc only supports 100 years\n");
+		return -EINVAL;
+	}
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	writeb(bin2bcd(tm->tm_sec),  info->base + S3C2410_RTCSEC);
+	writeb(bin2bcd(tm->tm_min),  info->base + S3C2410_RTCMIN);
+	writeb(bin2bcd(tm->tm_hour), info->base + S3C2410_RTCHOUR);
+	writeb(bin2bcd(tm->tm_mday), info->base + S3C2410_RTCDATE);
+	writeb(bin2bcd(tm->tm_mon + 1), info->base + S3C2410_RTCMON);
+	writeb(bin2bcd(year), info->base + S3C2410_RTCYEAR);
+
+	s3c_rtc_disable_clk(info);
+
+	return 0;
+}
+
+static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	struct rtc_time *alm_tm = &alrm->time;
+	unsigned int alm_en;
+	int ret;
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	alm_tm->tm_sec  = readb(info->base + S3C2410_ALMSEC);
+	alm_tm->tm_min  = readb(info->base + S3C2410_ALMMIN);
+	alm_tm->tm_hour = readb(info->base + S3C2410_ALMHOUR);
+	alm_tm->tm_mon  = readb(info->base + S3C2410_ALMMON);
+	alm_tm->tm_mday = readb(info->base + S3C2410_ALMDATE);
+	alm_tm->tm_year = readb(info->base + S3C2410_ALMYEAR);
+
+	alm_en = readb(info->base + S3C2410_RTCALM);
+
+	s3c_rtc_disable_clk(info);
+
+	alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0;
+
+	dev_dbg(dev, "read alarm %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+		alm_en,
+		1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+		alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+	/* decode the alarm enable field */
+	if (alm_en & S3C2410_RTCALM_SECEN)
+		alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
+
+	if (alm_en & S3C2410_RTCALM_MINEN)
+		alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
+
+	if (alm_en & S3C2410_RTCALM_HOUREN)
+		alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
+
+	if (alm_en & S3C2410_RTCALM_DAYEN)
+		alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday);
+
+	if (alm_en & S3C2410_RTCALM_MONEN) {
+		alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon);
+		alm_tm->tm_mon -= 1;
+	}
+
+	if (alm_en & S3C2410_RTCALM_YEAREN)
+		alm_tm->tm_year = bcd2bin(alm_tm->tm_year);
+
+	return 0;
+}
+
+static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned int alrm_en;
+	int ret;
+
+	dev_dbg(dev, "s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+		alrm->enabled,
+		1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	alrm_en = readb(info->base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
+	writeb(0x00, info->base + S3C2410_RTCALM);
+
+	if (tm->tm_sec < 60 && tm->tm_sec >= 0) {
+		alrm_en |= S3C2410_RTCALM_SECEN;
+		writeb(bin2bcd(tm->tm_sec), info->base + S3C2410_ALMSEC);
+	}
+
+	if (tm->tm_min < 60 && tm->tm_min >= 0) {
+		alrm_en |= S3C2410_RTCALM_MINEN;
+		writeb(bin2bcd(tm->tm_min), info->base + S3C2410_ALMMIN);
+	}
+
+	if (tm->tm_hour < 24 && tm->tm_hour >= 0) {
+		alrm_en |= S3C2410_RTCALM_HOUREN;
+		writeb(bin2bcd(tm->tm_hour), info->base + S3C2410_ALMHOUR);
+	}
+
+	if (tm->tm_mon < 12 && tm->tm_mon >= 0) {
+		alrm_en |= S3C2410_RTCALM_MONEN;
+		writeb(bin2bcd(tm->tm_mon + 1), info->base + S3C2410_ALMMON);
+	}
+
+	if (tm->tm_mday <= 31 && tm->tm_mday >= 1) {
+		alrm_en |= S3C2410_RTCALM_DAYEN;
+		writeb(bin2bcd(tm->tm_mday), info->base + S3C2410_ALMDATE);
+	}
+
+	dev_dbg(dev, "setting S3C2410_RTCALM to %08x\n", alrm_en);
+
+	writeb(alrm_en, info->base + S3C2410_RTCALM);
+
+	s3c_rtc_disable_clk(info);
+
+	s3c_rtc_setaie(dev, alrm->enabled);
+
+	return 0;
+}
+
+static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	int ret;
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	if (info->data->enable_tick)
+		info->data->enable_tick(info, seq);
+
+	s3c_rtc_disable_clk(info);
+
+	return 0;
+}
+
+static const struct rtc_class_ops s3c_rtcops = {
+	.read_time	= s3c_rtc_gettime,
+	.set_time	= s3c_rtc_settime,
+	.read_alarm	= s3c_rtc_getalarm,
+	.set_alarm	= s3c_rtc_setalarm,
+	.proc		= s3c_rtc_proc,
+	.alarm_irq_enable = s3c_rtc_setaie,
+};
+
+static void s3c24xx_rtc_enable(struct s3c_rtc *info)
+{
+	unsigned int con, tmp;
+
+	con = readw(info->base + S3C2410_RTCCON);
+	/* re-enable the device, and check it is ok */
+	if ((con & S3C2410_RTCCON_RTCEN) == 0) {
+		dev_info(info->dev, "rtc disabled, re-enabling\n");
+
+		tmp = readw(info->base + S3C2410_RTCCON);
+		writew(tmp | S3C2410_RTCCON_RTCEN, info->base + S3C2410_RTCCON);
+	}
+
+	if (con & S3C2410_RTCCON_CNTSEL) {
+		dev_info(info->dev, "removing RTCCON_CNTSEL\n");
+
+		tmp = readw(info->base + S3C2410_RTCCON);
+		writew(tmp & ~S3C2410_RTCCON_CNTSEL,
+		       info->base + S3C2410_RTCCON);
+	}
+
+	if (con & S3C2410_RTCCON_CLKRST) {
+		dev_info(info->dev, "removing RTCCON_CLKRST\n");
+
+		tmp = readw(info->base + S3C2410_RTCCON);
+		writew(tmp & ~S3C2410_RTCCON_CLKRST,
+		       info->base + S3C2410_RTCCON);
+	}
+}
+
+static void s3c24xx_rtc_disable(struct s3c_rtc *info)
+{
+	unsigned int con;
+
+	con = readw(info->base + S3C2410_RTCCON);
+	con &= ~S3C2410_RTCCON_RTCEN;
+	writew(con, info->base + S3C2410_RTCCON);
+
+	con = readb(info->base + S3C2410_TICNT);
+	con &= ~S3C2410_TICNT_ENABLE;
+	writeb(con, info->base + S3C2410_TICNT);
+}
+
+static void s3c6410_rtc_disable(struct s3c_rtc *info)
+{
+	unsigned int con;
+
+	con = readw(info->base + S3C2410_RTCCON);
+	con &= ~S3C64XX_RTCCON_TICEN;
+	con &= ~S3C2410_RTCCON_RTCEN;
+	writew(con, info->base + S3C2410_RTCCON);
+}
+
+static int s3c_rtc_remove(struct platform_device *pdev)
+{
+	struct s3c_rtc *info = platform_get_drvdata(pdev);
+
+	s3c_rtc_setaie(info->dev, 0);
+
+	if (info->data->needs_src_clk)
+		clk_unprepare(info->rtc_src_clk);
+	clk_unprepare(info->rtc_clk);
+
+	return 0;
+}
+
+static const struct of_device_id s3c_rtc_dt_match[];
+
+static const struct s3c_rtc_data *s3c_rtc_get_data(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+
+	match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
+	return match->data;
+}
+
+static int s3c_rtc_probe(struct platform_device *pdev)
+{
+	struct s3c_rtc *info = NULL;
+	struct rtc_time rtc_tm;
+	struct resource *res;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	/* find the IRQs */
+	info->irq_tick = platform_get_irq(pdev, 1);
+	if (info->irq_tick < 0) {
+		dev_err(&pdev->dev, "no irq for rtc tick\n");
+		return info->irq_tick;
+	}
+
+	info->dev = &pdev->dev;
+	info->data = s3c_rtc_get_data(pdev);
+	if (!info->data) {
+		dev_err(&pdev->dev, "failed getting s3c_rtc_data\n");
+		return -EINVAL;
+	}
+	spin_lock_init(&info->pie_lock);
+	spin_lock_init(&info->alarm_clk_lock);
+
+	platform_set_drvdata(pdev, info);
+
+	info->irq_alarm = platform_get_irq(pdev, 0);
+	if (info->irq_alarm < 0) {
+		dev_err(&pdev->dev, "no irq for alarm\n");
+		return info->irq_alarm;
+	}
+
+	dev_dbg(&pdev->dev, "s3c2410_rtc: tick irq %d, alarm irq %d\n",
+		info->irq_tick, info->irq_alarm);
+
+	/* get the memory region */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->base))
+		return PTR_ERR(info->base);
+
+	info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(info->rtc_clk)) {
+		ret = PTR_ERR(info->rtc_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to find rtc clock\n");
+		else
+			dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
+		return ret;
+	}
+	ret = clk_prepare_enable(info->rtc_clk);
+	if (ret)
+		return ret;
+
+	if (info->data->needs_src_clk) {
+		info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
+		if (IS_ERR(info->rtc_src_clk)) {
+			ret = PTR_ERR(info->rtc_src_clk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(&pdev->dev,
+					"failed to find rtc source clock\n");
+			else
+				dev_dbg(&pdev->dev,
+					"probe deferred due to missing rtc src clk\n");
+			goto err_src_clk;
+		}
+		ret = clk_prepare_enable(info->rtc_src_clk);
+		if (ret)
+			goto err_src_clk;
+	}
+
+	/* check to see if everything is setup correctly */
+	if (info->data->enable)
+		info->data->enable(info);
+
+	dev_dbg(&pdev->dev, "s3c2410_rtc: RTCCON=%02x\n",
+		readw(info->base + S3C2410_RTCCON));
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* Check RTC Time */
+	if (s3c_rtc_gettime(&pdev->dev, &rtc_tm)) {
+		rtc_tm.tm_year	= 100;
+		rtc_tm.tm_mon	= 0;
+		rtc_tm.tm_mday	= 1;
+		rtc_tm.tm_hour	= 0;
+		rtc_tm.tm_min	= 0;
+		rtc_tm.tm_sec	= 0;
+
+		s3c_rtc_settime(&pdev->dev, &rtc_tm);
+
+		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
+	}
+
+	/* register RTC and exit */
+	info->rtc = devm_rtc_device_register(&pdev->dev, "s3c", &s3c_rtcops,
+					     THIS_MODULE);
+	if (IS_ERR(info->rtc)) {
+		dev_err(&pdev->dev, "cannot attach rtc\n");
+		ret = PTR_ERR(info->rtc);
+		goto err_nortc;
+	}
+
+	ret = devm_request_irq(&pdev->dev, info->irq_alarm, s3c_rtc_alarmirq,
+			       0, "s3c2410-rtc alarm", info);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d error %d\n", info->irq_alarm, ret);
+		goto err_nortc;
+	}
+
+	ret = devm_request_irq(&pdev->dev, info->irq_tick, s3c_rtc_tickirq,
+			       0, "s3c2410-rtc tick", info);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d error %d\n", info->irq_tick, ret);
+		goto err_nortc;
+	}
+
+	if (info->data->select_tick_clk)
+		info->data->select_tick_clk(info);
+
+	s3c_rtc_setfreq(info, 1);
+
+	return 0;
+
+err_nortc:
+	if (info->data->disable)
+		info->data->disable(info);
+
+	if (info->data->needs_src_clk)
+		clk_disable_unprepare(info->rtc_src_clk);
+err_src_clk:
+	clk_disable_unprepare(info->rtc_clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int s3c_rtc_suspend(struct device *dev)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+	int ret;
+
+	ret = s3c_rtc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	/* save TICNT for anyone using periodic interrupts */
+	if (info->data->save_tick_cnt)
+		info->data->save_tick_cnt(info);
+
+	if (info->data->disable)
+		info->data->disable(info);
+
+	if (device_may_wakeup(dev) && !info->wake_en) {
+		if (enable_irq_wake(info->irq_alarm) == 0)
+			info->wake_en = true;
+		else
+			dev_err(dev, "enable_irq_wake failed\n");
+	}
+
+	return 0;
+}
+
+static int s3c_rtc_resume(struct device *dev)
+{
+	struct s3c_rtc *info = dev_get_drvdata(dev);
+
+	if (info->data->enable)
+		info->data->enable(info);
+
+	if (info->data->restore_tick_cnt)
+		info->data->restore_tick_cnt(info);
+
+	s3c_rtc_disable_clk(info);
+
+	if (device_may_wakeup(dev) && info->wake_en) {
+		disable_irq_wake(info->irq_alarm);
+		info->wake_en = false;
+	}
+
+	return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(s3c_rtc_pm_ops, s3c_rtc_suspend, s3c_rtc_resume);
+
+static void s3c24xx_rtc_irq(struct s3c_rtc *info, int mask)
+{
+	rtc_update_irq(info->rtc, 1, RTC_AF | RTC_IRQF);
+}
+
+static void s3c6410_rtc_irq(struct s3c_rtc *info, int mask)
+{
+	rtc_update_irq(info->rtc, 1, RTC_AF | RTC_IRQF);
+	writeb(mask, info->base + S3C2410_INTP);
+}
+
+static void s3c2410_rtc_setfreq(struct s3c_rtc *info, int freq)
+{
+	unsigned int tmp = 0;
+	int val;
+
+	tmp = readb(info->base + S3C2410_TICNT);
+	tmp &= S3C2410_TICNT_ENABLE;
+
+	val = (info->rtc->max_user_freq / freq) - 1;
+	tmp |= val;
+
+	writel(tmp, info->base + S3C2410_TICNT);
+}
+
+static void s3c2416_rtc_setfreq(struct s3c_rtc *info, int freq)
+{
+	unsigned int tmp = 0;
+	int val;
+
+	tmp = readb(info->base + S3C2410_TICNT);
+	tmp &= S3C2410_TICNT_ENABLE;
+
+	val = (info->rtc->max_user_freq / freq) - 1;
+
+	tmp |= S3C2443_TICNT_PART(val);
+	writel(S3C2443_TICNT1_PART(val), info->base + S3C2443_TICNT1);
+
+	writel(S3C2416_TICNT2_PART(val), info->base + S3C2416_TICNT2);
+
+	writel(tmp, info->base + S3C2410_TICNT);
+}
+
+static void s3c2443_rtc_setfreq(struct s3c_rtc *info, int freq)
+{
+	unsigned int tmp = 0;
+	int val;
+
+	tmp = readb(info->base + S3C2410_TICNT);
+	tmp &= S3C2410_TICNT_ENABLE;
+
+	val = (info->rtc->max_user_freq / freq) - 1;
+
+	tmp |= S3C2443_TICNT_PART(val);
+	writel(S3C2443_TICNT1_PART(val), info->base + S3C2443_TICNT1);
+
+	writel(tmp, info->base + S3C2410_TICNT);
+}
+
+static void s3c6410_rtc_setfreq(struct s3c_rtc *info, int freq)
+{
+	int val;
+
+	val = (info->rtc->max_user_freq / freq) - 1;
+	writel(val, info->base + S3C2410_TICNT);
+}
+
+static void s3c24xx_rtc_enable_tick(struct s3c_rtc *info, struct seq_file *seq)
+{
+	unsigned int ticnt;
+
+	ticnt = readb(info->base + S3C2410_TICNT);
+	ticnt &= S3C2410_TICNT_ENABLE;
+
+	seq_printf(seq, "periodic_IRQ\t: %s\n", ticnt  ? "yes" : "no");
+}
+
+static void s3c2416_rtc_select_tick_clk(struct s3c_rtc *info)
+{
+	unsigned int con;
+
+	con = readw(info->base + S3C2410_RTCCON);
+	con |= S3C2443_RTCCON_TICSEL;
+	writew(con, info->base + S3C2410_RTCCON);
+}
+
+static void s3c6410_rtc_enable_tick(struct s3c_rtc *info, struct seq_file *seq)
+{
+	unsigned int ticnt;
+
+	ticnt = readw(info->base + S3C2410_RTCCON);
+	ticnt &= S3C64XX_RTCCON_TICEN;
+
+	seq_printf(seq, "periodic_IRQ\t: %s\n", ticnt  ? "yes" : "no");
+}
+
+static void s3c24xx_rtc_save_tick_cnt(struct s3c_rtc *info)
+{
+	info->ticnt_save = readb(info->base + S3C2410_TICNT);
+}
+
+static void s3c24xx_rtc_restore_tick_cnt(struct s3c_rtc *info)
+{
+	writeb(info->ticnt_save, info->base + S3C2410_TICNT);
+}
+
+static void s3c6410_rtc_save_tick_cnt(struct s3c_rtc *info)
+{
+	info->ticnt_en_save = readw(info->base + S3C2410_RTCCON);
+	info->ticnt_en_save &= S3C64XX_RTCCON_TICEN;
+	info->ticnt_save = readl(info->base + S3C2410_TICNT);
+}
+
+static void s3c6410_rtc_restore_tick_cnt(struct s3c_rtc *info)
+{
+	unsigned int con;
+
+	writel(info->ticnt_save, info->base + S3C2410_TICNT);
+	if (info->ticnt_en_save) {
+		con = readw(info->base + S3C2410_RTCCON);
+		writew(con | info->ticnt_en_save, info->base + S3C2410_RTCCON);
+	}
+}
+
+static struct s3c_rtc_data const s3c2410_rtc_data = {
+	.max_user_freq		= 128,
+	.irq_handler		= s3c24xx_rtc_irq,
+	.set_freq		= s3c2410_rtc_setfreq,
+	.enable_tick		= s3c24xx_rtc_enable_tick,
+	.save_tick_cnt		= s3c24xx_rtc_save_tick_cnt,
+	.restore_tick_cnt	= s3c24xx_rtc_restore_tick_cnt,
+	.enable			= s3c24xx_rtc_enable,
+	.disable		= s3c24xx_rtc_disable,
+};
+
+static struct s3c_rtc_data const s3c2416_rtc_data = {
+	.max_user_freq		= 32768,
+	.irq_handler		= s3c24xx_rtc_irq,
+	.set_freq		= s3c2416_rtc_setfreq,
+	.enable_tick		= s3c24xx_rtc_enable_tick,
+	.select_tick_clk	= s3c2416_rtc_select_tick_clk,
+	.save_tick_cnt		= s3c24xx_rtc_save_tick_cnt,
+	.restore_tick_cnt	= s3c24xx_rtc_restore_tick_cnt,
+	.enable			= s3c24xx_rtc_enable,
+	.disable		= s3c24xx_rtc_disable,
+};
+
+static struct s3c_rtc_data const s3c2443_rtc_data = {
+	.max_user_freq		= 32768,
+	.irq_handler		= s3c24xx_rtc_irq,
+	.set_freq		= s3c2443_rtc_setfreq,
+	.enable_tick		= s3c24xx_rtc_enable_tick,
+	.select_tick_clk	= s3c2416_rtc_select_tick_clk,
+	.save_tick_cnt		= s3c24xx_rtc_save_tick_cnt,
+	.restore_tick_cnt	= s3c24xx_rtc_restore_tick_cnt,
+	.enable			= s3c24xx_rtc_enable,
+	.disable		= s3c24xx_rtc_disable,
+};
+
+static struct s3c_rtc_data const s3c6410_rtc_data = {
+	.max_user_freq		= 32768,
+	.needs_src_clk		= true,
+	.irq_handler		= s3c6410_rtc_irq,
+	.set_freq		= s3c6410_rtc_setfreq,
+	.enable_tick		= s3c6410_rtc_enable_tick,
+	.save_tick_cnt		= s3c6410_rtc_save_tick_cnt,
+	.restore_tick_cnt	= s3c6410_rtc_restore_tick_cnt,
+	.enable			= s3c24xx_rtc_enable,
+	.disable		= s3c6410_rtc_disable,
+};
+
+static const struct of_device_id s3c_rtc_dt_match[] = {
+	{
+		.compatible = "samsung,s3c2410-rtc",
+		.data = &s3c2410_rtc_data,
+	}, {
+		.compatible = "samsung,s3c2416-rtc",
+		.data = &s3c2416_rtc_data,
+	}, {
+		.compatible = "samsung,s3c2443-rtc",
+		.data = &s3c2443_rtc_data,
+	}, {
+		.compatible = "samsung,s3c6410-rtc",
+		.data = &s3c6410_rtc_data,
+	}, {
+		.compatible = "samsung,exynos3250-rtc",
+		.data = &s3c6410_rtc_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
+
+static struct platform_driver s3c_rtc_driver = {
+	.probe		= s3c_rtc_probe,
+	.remove		= s3c_rtc_remove,
+	.driver		= {
+		.name	= "s3c-rtc",
+		.pm	= &s3c_rtc_pm_ops,
+		.of_match_table	= of_match_ptr(s3c_rtc_dt_match),
+	},
+};
+module_platform_driver(s3c_rtc_driver);
+
+MODULE_DESCRIPTION("Samsung S3C RTC Driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.h b/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.h
new file mode 100644
index 0000000..004b61a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-s3c.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Internal RTC register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_RTC_H
+#define __ASM_ARCH_REGS_RTC_H __FILE__
+
+#define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP		S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM	(1 << 1)
+#define S3C2410_INTP_TIC	(1 << 0)
+
+#define S3C2410_RTCCON		S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN	(1 << 0)
+#define S3C2410_RTCCON_CNTSEL	(1 << 2)
+#define S3C2410_RTCCON_CLKRST	(1 << 3)
+#define S3C2443_RTCCON_TICSEL	(1 << 4)
+#define S3C64XX_RTCCON_TICEN	(1 << 8)
+
+#define S3C2410_TICNT		S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE	(1 << 7)
+
+/* S3C2443: tick count is 15 bit wide
+ * TICNT[6:0] contains upper 7 bits
+ * TICNT1[7:0] contains lower 8 bits
+ */
+#define S3C2443_TICNT_PART(x)	((x & 0x7f00) >> 8)
+#define S3C2443_TICNT1		S3C2410_RTCREG(0x4C)
+#define S3C2443_TICNT1_PART(x)	(x & 0xff)
+
+/* S3C2416: tick count is 32 bit wide
+ * TICNT[6:0] contains bits [14:8]
+ * TICNT1[7:0] contains lower 8 bits
+ * TICNT2[16:0] contains upper 17 bits
+ */
+#define S3C2416_TICNT2		S3C2410_RTCREG(0x48)
+#define S3C2416_TICNT2_PART(x)	((x & 0xffff8000) >> 15)
+
+#define S3C2410_RTCALM		S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN	(1 << 6)
+#define S3C2410_RTCALM_YEAREN	(1 << 5)
+#define S3C2410_RTCALM_MONEN	(1 << 4)
+#define S3C2410_RTCALM_DAYEN	(1 << 3)
+#define S3C2410_RTCALM_HOUREN	(1 << 2)
+#define S3C2410_RTCALM_MINEN	(1 << 1)
+#define S3C2410_RTCALM_SECEN	(1 << 0)
+
+#define S3C2410_ALMSEC		S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN		S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR		S3C2410_RTCREG(0x5c)
+
+#define S3C2410_ALMDATE		S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON		S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR		S3C2410_RTCREG(0x68)
+
+#define S3C2410_RTCSEC		S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN		S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR		S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE		S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCMON		S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR		S3C2410_RTCREG(0x88)
+
+#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-s5m.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-s5m.c
new file mode 100644
index 0000000..0477678
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-s5m.c
@@ -0,0 +1,899 @@
+/*
+ * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd
+ *	http://www.samsung.com
+ *
+ *  Copyright (C) 2013 Google, Inc
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/irq.h>
+#include <linux/mfd/samsung/rtc.h>
+#include <linux/mfd/samsung/s2mps14.h>
+
+/*
+ * Maximum number of retries for checking changes in UDR field
+ * of S5M_RTC_UDR_CON register (to limit possible endless loop).
+ *
+ * After writing to RTC registers (setting time or alarm) read the UDR field
+ * in S5M_RTC_UDR_CON register. UDR is auto-cleared when data have
+ * been transferred.
+ */
+#define UDR_READ_RETRY_CNT	5
+
+/*
+ * Registers used by the driver which are different between chipsets.
+ *
+ * Operations like read time and write alarm/time require updating
+ * specific fields in UDR register. These fields usually are auto-cleared
+ * (with some exceptions).
+ *
+ * Table of operations per device:
+ *
+ * Device     | Write time | Read time | Write alarm
+ * =================================================
+ * S5M8767    | UDR + TIME |           | UDR
+ * S2MPS11/14 | WUDR       | RUDR      | WUDR + RUDR
+ * S2MPS13    | WUDR       | RUDR      | WUDR + AUDR
+ * S2MPS15    | WUDR       | RUDR      | AUDR
+ */
+struct s5m_rtc_reg_config {
+	/* Number of registers used for setting time/alarm0/alarm1 */
+	unsigned int regs_count;
+	/* First register for time, seconds */
+	unsigned int time;
+	/* RTC control register */
+	unsigned int ctrl;
+	/* First register for alarm 0, seconds */
+	unsigned int alarm0;
+	/* First register for alarm 1, seconds */
+	unsigned int alarm1;
+	/*
+	 * Register for update flag (UDR). Typically setting UDR field to 1
+	 * will enable update of time or alarm register. Then it will be
+	 * auto-cleared after successful update.
+	 */
+	unsigned int udr_update;
+	/* Auto-cleared mask in UDR field for writing time and alarm */
+	unsigned int autoclear_udr_mask;
+	/*
+	 * Masks in UDR field for time and alarm operations.
+	 * The read time mask can be 0. Rest should not.
+	 */
+	unsigned int read_time_udr_mask;
+	unsigned int write_time_udr_mask;
+	unsigned int write_alarm_udr_mask;
+};
+
+/* Register map for S5M8763 and S5M8767 */
+static const struct s5m_rtc_reg_config s5m_rtc_regs = {
+	.regs_count		= 8,
+	.time			= S5M_RTC_SEC,
+	.ctrl			= S5M_ALARM1_CONF,
+	.alarm0			= S5M_ALARM0_SEC,
+	.alarm1			= S5M_ALARM1_SEC,
+	.udr_update		= S5M_RTC_UDR_CON,
+	.autoclear_udr_mask	= S5M_RTC_UDR_MASK,
+	.read_time_udr_mask	= 0, /* Not needed */
+	.write_time_udr_mask	= S5M_RTC_UDR_MASK | S5M_RTC_TIME_EN_MASK,
+	.write_alarm_udr_mask	= S5M_RTC_UDR_MASK,
+};
+
+/* Register map for S2MPS13 */
+static const struct s5m_rtc_reg_config s2mps13_rtc_regs = {
+	.regs_count		= 7,
+	.time			= S2MPS_RTC_SEC,
+	.ctrl			= S2MPS_RTC_CTRL,
+	.alarm0			= S2MPS_ALARM0_SEC,
+	.alarm1			= S2MPS_ALARM1_SEC,
+	.udr_update		= S2MPS_RTC_UDR_CON,
+	.autoclear_udr_mask	= S2MPS_RTC_WUDR_MASK,
+	.read_time_udr_mask	= S2MPS_RTC_RUDR_MASK,
+	.write_time_udr_mask	= S2MPS_RTC_WUDR_MASK,
+	.write_alarm_udr_mask	= S2MPS_RTC_WUDR_MASK | S2MPS13_RTC_AUDR_MASK,
+};
+
+/* Register map for S2MPS11/14 */
+static const struct s5m_rtc_reg_config s2mps14_rtc_regs = {
+	.regs_count		= 7,
+	.time			= S2MPS_RTC_SEC,
+	.ctrl			= S2MPS_RTC_CTRL,
+	.alarm0			= S2MPS_ALARM0_SEC,
+	.alarm1			= S2MPS_ALARM1_SEC,
+	.udr_update		= S2MPS_RTC_UDR_CON,
+	.autoclear_udr_mask	= S2MPS_RTC_WUDR_MASK,
+	.read_time_udr_mask	= S2MPS_RTC_RUDR_MASK,
+	.write_time_udr_mask	= S2MPS_RTC_WUDR_MASK,
+	.write_alarm_udr_mask	= S2MPS_RTC_WUDR_MASK | S2MPS_RTC_RUDR_MASK,
+};
+
+/*
+ * Register map for S2MPS15 - in comparison to S2MPS14 the WUDR and AUDR bits
+ * are swapped.
+ */
+static const struct s5m_rtc_reg_config s2mps15_rtc_regs = {
+	.regs_count		= 7,
+	.time			= S2MPS_RTC_SEC,
+	.ctrl			= S2MPS_RTC_CTRL,
+	.alarm0			= S2MPS_ALARM0_SEC,
+	.alarm1			= S2MPS_ALARM1_SEC,
+	.udr_update		= S2MPS_RTC_UDR_CON,
+	.autoclear_udr_mask	= S2MPS_RTC_WUDR_MASK,
+	.read_time_udr_mask	= S2MPS_RTC_RUDR_MASK,
+	.write_time_udr_mask	= S2MPS15_RTC_WUDR_MASK,
+	.write_alarm_udr_mask	= S2MPS15_RTC_AUDR_MASK,
+};
+
+struct s5m_rtc_info {
+	struct device *dev;
+	struct i2c_client *i2c;
+	struct sec_pmic_dev *s5m87xx;
+	struct regmap *regmap;
+	struct rtc_device *rtc_dev;
+	int irq;
+	enum sec_device_type device_type;
+	int rtc_24hr_mode;
+	const struct s5m_rtc_reg_config	*regs;
+};
+
+static const struct regmap_config s5m_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S5M_RTC_REG_MAX,
+};
+
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS_RTC_REG_MAX,
+};
+
+static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm,
+			       int rtc_24hr_mode)
+{
+	tm->tm_sec = data[RTC_SEC] & 0x7f;
+	tm->tm_min = data[RTC_MIN] & 0x7f;
+	if (rtc_24hr_mode) {
+		tm->tm_hour = data[RTC_HOUR] & 0x1f;
+	} else {
+		tm->tm_hour = data[RTC_HOUR] & 0x0f;
+		if (data[RTC_HOUR] & HOUR_PM_MASK)
+			tm->tm_hour += 12;
+	}
+
+	tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f);
+	tm->tm_mday = data[RTC_DATE] & 0x1f;
+	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
+	tm->tm_year = (data[RTC_YEAR1] & 0x7f) + 100;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+}
+
+static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	data[RTC_SEC] = tm->tm_sec;
+	data[RTC_MIN] = tm->tm_min;
+
+	if (tm->tm_hour >= 12)
+		data[RTC_HOUR] = tm->tm_hour | HOUR_PM_MASK;
+	else
+		data[RTC_HOUR] = tm->tm_hour & ~HOUR_PM_MASK;
+
+	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
+	data[RTC_DATE] = tm->tm_mday;
+	data[RTC_MONTH] = tm->tm_mon + 1;
+	data[RTC_YEAR1] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
+
+	if (tm->tm_year < 100) {
+		pr_err("RTC cannot handle the year %d\n",
+		       1900 + tm->tm_year);
+		return -EINVAL;
+	} else {
+		return 0;
+	}
+}
+
+/*
+ * Read RTC_UDR_CON register and wait till UDR field is cleared.
+ * This indicates that time/alarm update ended.
+ */
+static int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
+{
+	int ret, retry = UDR_READ_RETRY_CNT;
+	unsigned int data;
+
+	do {
+		ret = regmap_read(info->regmap, info->regs->udr_update, &data);
+	} while (--retry && (data & info->regs->autoclear_udr_mask) && !ret);
+
+	if (!retry)
+		dev_err(info->dev, "waiting for UDR update, reached max number of retries\n");
+
+	return ret;
+}
+
+static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
+		struct rtc_wkalrm *alarm)
+{
+	int ret;
+	unsigned int val;
+
+	switch (info->device_type) {
+	case S5M8767X:
+	case S5M8763X:
+		ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
+		val &= S5M_ALARM0_STATUS;
+		break;
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
+				&val);
+		val &= S2MPS_ALARM0_STATUS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+
+	if (val)
+		alarm->pending = 1;
+	else
+		alarm->pending = 0;
+
+	return 0;
+}
+
+static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
+{
+	int ret;
+	unsigned int data;
+
+	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to read update reg(%d)\n", ret);
+		return ret;
+	}
+
+	data |= info->regs->write_time_udr_mask;
+
+	ret = regmap_write(info->regmap, info->regs->udr_update, data);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to write update reg(%d)\n", ret);
+		return ret;
+	}
+
+	ret = s5m8767_wait_for_udr_update(info);
+
+	return ret;
+}
+
+static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
+{
+	int ret;
+	unsigned int data;
+
+	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read update reg(%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	data |= info->regs->write_alarm_udr_mask;
+	switch (info->device_type) {
+	case S5M8763X:
+	case S5M8767X:
+		data &= ~S5M_RTC_TIME_EN_MASK;
+		break;
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		/* No exceptions needed */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(info->regmap, info->regs->udr_update, data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write update reg(%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = s5m8767_wait_for_udr_update(info);
+
+	/* On S2MPS13 the AUDR is not auto-cleared */
+	if (info->device_type == S2MPS13X)
+		regmap_update_bits(info->regmap, info->regs->udr_update,
+				   S2MPS13_RTC_AUDR_MASK, 0);
+
+	return ret;
+}
+
+static void s5m8763_data_to_tm(u8 *data, struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(data[RTC_SEC]);
+	tm->tm_min = bcd2bin(data[RTC_MIN]);
+
+	if (data[RTC_HOUR] & HOUR_12) {
+		tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x1f);
+		if (data[RTC_HOUR] & HOUR_PM)
+			tm->tm_hour += 12;
+	} else {
+		tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
+	}
+
+	tm->tm_wday = data[RTC_WEEKDAY] & 0x07;
+	tm->tm_mday = bcd2bin(data[RTC_DATE]);
+	tm->tm_mon = bcd2bin(data[RTC_MONTH]);
+	tm->tm_year = bcd2bin(data[RTC_YEAR1]) + bcd2bin(data[RTC_YEAR2]) * 100;
+	tm->tm_year -= 1900;
+}
+
+static void s5m8763_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	data[RTC_SEC] = bin2bcd(tm->tm_sec);
+	data[RTC_MIN] = bin2bcd(tm->tm_min);
+	data[RTC_HOUR] = bin2bcd(tm->tm_hour);
+	data[RTC_WEEKDAY] = tm->tm_wday;
+	data[RTC_DATE] = bin2bcd(tm->tm_mday);
+	data[RTC_MONTH] = bin2bcd(tm->tm_mon);
+	data[RTC_YEAR1] = bin2bcd(tm->tm_year % 100);
+	data[RTC_YEAR2] = bin2bcd((tm->tm_year + 1900) / 100);
+}
+
+static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[info->regs->regs_count];
+	int ret;
+
+	if (info->regs->read_time_udr_mask) {
+		ret = regmap_update_bits(info->regmap,
+				info->regs->udr_update,
+				info->regs->read_time_udr_mask,
+				info->regs->read_time_udr_mask);
+		if (ret) {
+			dev_err(dev,
+				"Failed to prepare registers for time reading: %d\n",
+				ret);
+			return ret;
+		}
+	}
+	ret = regmap_bulk_read(info->regmap, info->regs->time, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	switch (info->device_type) {
+	case S5M8763X:
+		s5m8763_data_to_tm(data, tm);
+		break;
+
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[info->regs->regs_count];
+	int ret = 0;
+
+	switch (info->device_type) {
+	case S5M8763X:
+		s5m8763_tm_to_data(tm, data);
+		break;
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		ret = s5m8767_tm_to_data(tm, data);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday);
+
+	ret = regmap_raw_write(info->regmap, info->regs->time, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	ret = s5m8767_rtc_set_time_reg(info);
+
+	return ret;
+}
+
+static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[info->regs->regs_count];
+	unsigned int val;
+	int ret, i;
+
+	ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	switch (info->device_type) {
+	case S5M8763X:
+		s5m8763_data_to_tm(data, &alrm->time);
+		ret = regmap_read(info->regmap, S5M_ALARM0_CONF, &val);
+		if (ret < 0)
+			return ret;
+
+		alrm->enabled = !!val;
+		break;
+
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+		alrm->enabled = 0;
+		for (i = 0; i < info->regs->regs_count; i++) {
+			if (data[i] & ALARM_ENABLE_MASK) {
+				alrm->enabled = 1;
+				break;
+			}
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
+		alrm->time.tm_mday, alrm->time.tm_hour,
+		alrm->time.tm_min, alrm->time.tm_sec,
+		alrm->time.tm_wday);
+
+	ret = s5m_check_peding_alarm_interrupt(info, alrm);
+
+	return 0;
+}
+
+static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
+{
+	u8 data[info->regs->regs_count];
+	int ret, i;
+	struct rtc_time tm;
+
+	ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday);
+
+	switch (info->device_type) {
+	case S5M8763X:
+		ret = regmap_write(info->regmap, S5M_ALARM0_CONF, 0);
+		break;
+
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		for (i = 0; i < info->regs->regs_count; i++)
+			data[i] &= ~ALARM_ENABLE_MASK;
+
+		ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+				info->regs->regs_count);
+		if (ret < 0)
+			return ret;
+
+		ret = s5m8767_rtc_set_alarm_reg(info);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
+{
+	int ret;
+	u8 data[info->regs->regs_count];
+	u8 alarm0_conf;
+	struct rtc_time tm;
+
+	ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday);
+
+	switch (info->device_type) {
+	case S5M8763X:
+		alarm0_conf = 0x77;
+		ret = regmap_write(info->regmap, S5M_ALARM0_CONF, alarm0_conf);
+		break;
+
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		data[RTC_SEC] |= ALARM_ENABLE_MASK;
+		data[RTC_MIN] |= ALARM_ENABLE_MASK;
+		data[RTC_HOUR] |= ALARM_ENABLE_MASK;
+		data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
+		if (data[RTC_DATE] & 0x1f)
+			data[RTC_DATE] |= ALARM_ENABLE_MASK;
+		if (data[RTC_MONTH] & 0xf)
+			data[RTC_MONTH] |= ALARM_ENABLE_MASK;
+		if (data[RTC_YEAR1] & 0x7f)
+			data[RTC_YEAR1] |= ALARM_ENABLE_MASK;
+
+		ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+				info->regs->regs_count);
+		if (ret < 0)
+			return ret;
+		ret = s5m8767_rtc_set_alarm_reg(info);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[info->regs->regs_count];
+	int ret;
+
+	switch (info->device_type) {
+	case S5M8763X:
+		s5m8763_tm_to_data(&alrm->time, data);
+		break;
+
+	case S5M8767X:
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		s5m8767_tm_to_data(&alrm->time, data);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+		1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
+		alrm->time.tm_mday, alrm->time.tm_hour, alrm->time.tm_min,
+		alrm->time.tm_sec, alrm->time.tm_wday);
+
+	ret = s5m_rtc_stop_alarm(info);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+			info->regs->regs_count);
+	if (ret < 0)
+		return ret;
+
+	ret = s5m8767_rtc_set_alarm_reg(info);
+	if (ret < 0)
+		return ret;
+
+	if (alrm->enabled)
+		ret = s5m_rtc_start_alarm(info);
+
+	return ret;
+}
+
+static int s5m_rtc_alarm_irq_enable(struct device *dev,
+				    unsigned int enabled)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+
+	if (enabled)
+		return s5m_rtc_start_alarm(info);
+	else
+		return s5m_rtc_stop_alarm(info);
+}
+
+static irqreturn_t s5m_rtc_alarm_irq(int irq, void *data)
+{
+	struct s5m_rtc_info *info = data;
+
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops s5m_rtc_ops = {
+	.read_time = s5m_rtc_read_time,
+	.set_time = s5m_rtc_set_time,
+	.read_alarm = s5m_rtc_read_alarm,
+	.set_alarm = s5m_rtc_set_alarm,
+	.alarm_irq_enable = s5m_rtc_alarm_irq_enable,
+};
+
+static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
+{
+	u8 data[2];
+	int ret;
+
+	switch (info->device_type) {
+	case S5M8763X:
+	case S5M8767X:
+		/* UDR update time. Default of 7.32 ms is too long. */
+		ret = regmap_update_bits(info->regmap, S5M_RTC_UDR_CON,
+				S5M_RTC_UDR_T_MASK, S5M_RTC_UDR_T_450_US);
+		if (ret < 0)
+			dev_err(info->dev, "%s: fail to change UDR time: %d\n",
+					__func__, ret);
+
+		/* Set RTC control register : Binary mode, 24hour mode */
+		data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+		data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+
+		ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
+		break;
+
+	case S2MPS15X:
+	case S2MPS14X:
+	case S2MPS13X:
+		data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+		ret = regmap_write(info->regmap, info->regs->ctrl, data[0]);
+		if (ret < 0)
+			break;
+
+		/*
+		 * Should set WUDR & (RUDR or AUDR) bits to high after writing
+		 * RTC_CTRL register like writing Alarm registers. We can't find
+		 * the description from datasheet but vendor code does that
+		 * really.
+		 */
+		ret = s5m8767_rtc_set_alarm_reg(info);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	info->rtc_24hr_mode = 1;
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int s5m_rtc_probe(struct platform_device *pdev)
+{
+	struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
+	struct sec_platform_data *pdata = s5m87xx->pdata;
+	struct s5m_rtc_info *info;
+	const struct regmap_config *regmap_cfg;
+	int ret, alarm_irq;
+
+	if (!pdata) {
+		dev_err(pdev->dev.parent, "Platform data not supplied\n");
+		return -ENODEV;
+	}
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	switch (platform_get_device_id(pdev)->driver_data) {
+	case S2MPS15X:
+		regmap_cfg = &s2mps14_rtc_regmap_config;
+		info->regs = &s2mps15_rtc_regs;
+		alarm_irq = S2MPS14_IRQ_RTCA0;
+		break;
+	case S2MPS14X:
+		regmap_cfg = &s2mps14_rtc_regmap_config;
+		info->regs = &s2mps14_rtc_regs;
+		alarm_irq = S2MPS14_IRQ_RTCA0;
+		break;
+	case S2MPS13X:
+		regmap_cfg = &s2mps14_rtc_regmap_config;
+		info->regs = &s2mps13_rtc_regs;
+		alarm_irq = S2MPS14_IRQ_RTCA0;
+		break;
+	case S5M8763X:
+		regmap_cfg = &s5m_rtc_regmap_config;
+		info->regs = &s5m_rtc_regs;
+		alarm_irq = S5M8763_IRQ_ALARM0;
+		break;
+	case S5M8767X:
+		regmap_cfg = &s5m_rtc_regmap_config;
+		info->regs = &s5m_rtc_regs;
+		alarm_irq = S5M8767_IRQ_RTCA1;
+		break;
+	default:
+		dev_err(&pdev->dev,
+				"Device type %lu is not supported by RTC driver\n",
+				platform_get_device_id(pdev)->driver_data);
+		return -ENODEV;
+	}
+
+	info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR);
+	if (!info->i2c) {
+		dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n");
+		return -ENODEV;
+	}
+
+	info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n",
+				ret);
+		goto err;
+	}
+
+	info->dev = &pdev->dev;
+	info->s5m87xx = s5m87xx;
+	info->device_type = platform_get_device_id(pdev)->driver_data;
+
+	if (s5m87xx->irq_data) {
+		info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
+		if (info->irq <= 0) {
+			ret = -EINVAL;
+			dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
+				alarm_irq);
+			goto err;
+		}
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	ret = s5m8767_rtc_init_reg(info);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
+						 &s5m_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		goto err;
+	}
+
+	if (!info->irq) {
+		dev_info(&pdev->dev, "Alarm IRQ not available\n");
+		return 0;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					s5m_rtc_alarm_irq, 0, "rtc-alarm0",
+					info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			info->irq, ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	i2c_unregister_device(info->i2c);
+
+	return ret;
+}
+
+static int s5m_rtc_remove(struct platform_device *pdev)
+{
+	struct s5m_rtc_info *info = platform_get_drvdata(pdev);
+
+	i2c_unregister_device(info->i2c);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s5m_rtc_resume(struct device *dev)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (info->irq && device_may_wakeup(dev))
+		ret = disable_irq_wake(info->irq);
+
+	return ret;
+}
+
+static int s5m_rtc_suspend(struct device *dev)
+{
+	struct s5m_rtc_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (info->irq && device_may_wakeup(dev))
+		ret = enable_irq_wake(info->irq);
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume);
+
+static const struct platform_device_id s5m_rtc_id[] = {
+	{ "s5m-rtc",		S5M8767X },
+	{ "s2mps13-rtc",	S2MPS13X },
+	{ "s2mps14-rtc",	S2MPS14X },
+	{ "s2mps15-rtc",	S2MPS15X },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
+
+static struct platform_driver s5m_rtc_driver = {
+	.driver		= {
+		.name	= "s5m-rtc",
+		.pm	= &s5m_rtc_pm_ops,
+	},
+	.probe		= s5m_rtc_probe,
+	.remove		= s5m_rtc_remove,
+	.id_table	= s5m_rtc_id,
+};
+
+module_platform_driver(s5m_rtc_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("Samsung S5M/S2MPS14 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5m-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.c
new file mode 100644
index 0000000..ed71d11
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.c
@@ -0,0 +1,372 @@
+/*
+ * Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
+ *
+ * Copyright (c) 2000 Nils Faerber
+ *
+ * Based on rtc.c by Paul Gortmaker
+ *
+ * Original Driver by Nils Faerber <nils@kernelconcepts.de>
+ *
+ * Modifications from:
+ *   CIH <cih@coventive.com>
+ *   Nicolas Pitre <nico@fluxnic.net>
+ *   Andrew Christian <andrew.christian@hp.com>
+ *
+ * Converted to the RTC subsystem and Driver Model
+ *   by Richard Purdie <rpurdie@rpsys.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#define RTSR_HZE		BIT(3)	/* HZ interrupt enable */
+#define RTSR_ALE		BIT(2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ			BIT(1)	/* HZ rising-edge detected */
+#define RTSR_AL			BIT(0)	/* RTC alarm detected */
+
+#include "rtc-sa1100.h"
+
+#define RTC_DEF_DIVIDER		(32768 - 1)
+#define RTC_DEF_TRIM		0
+#define RTC_FREQ		1024
+
+
+static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev_id);
+	struct rtc_device *rtc = info->rtc;
+	unsigned int rtsr;
+	unsigned long events = 0;
+
+	spin_lock(&info->lock);
+
+	rtsr = readl_relaxed(info->rtsr);
+	/* clear interrupt sources */
+	writel_relaxed(0, info->rtsr);
+	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
+	 * See also the comments in sa1100_rtc_probe(). */
+	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
+		/* This is the original code, before there was the if test
+		 * above. This code does not clear interrupts that were not
+		 * enabled. */
+		writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
+	} else {
+		/* For some reason, it is possible to enter this routine
+		 * without interruptions enabled, it has been tested with
+		 * several units (Bug in SA11xx chip?).
+		 *
+		 * This situation leads to an infinite "loop" of interrupt
+		 * routine calling and as a result the processor seems to
+		 * lock on its first call to open(). */
+		writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
+	}
+
+	/* clear alarm interrupt if it has occurred */
+	if (rtsr & RTSR_AL)
+		rtsr &= ~RTSR_ALE;
+	writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);
+
+	/* update irq data & counter */
+	if (rtsr & RTSR_AL)
+		events |= RTC_AF | RTC_IRQF;
+	if (rtsr & RTSR_HZ)
+		events |= RTC_UF | RTC_IRQF;
+
+	rtc_update_irq(rtc, 1, events);
+
+	spin_unlock(&info->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	u32 rtsr;
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	spin_lock_irq(&info->lock);
+	rtsr = readl_relaxed(info->rtsr);
+	if (enabled)
+		rtsr |= RTSR_ALE;
+	else
+		rtsr &= ~RTSR_ALE;
+	writel_relaxed(rtsr, info->rtsr);
+	spin_unlock_irq(&info->lock);
+	return 0;
+}
+
+static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
+	return 0;
+}
+
+static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &time);
+	if (ret == 0)
+		writel_relaxed(time, info->rcnr);
+	return ret;
+}
+
+static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	u32	rtsr;
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	rtsr = readl_relaxed(info->rtsr);
+	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
+	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
+	return 0;
+}
+
+static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	spin_lock_irq(&info->lock);
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret != 0)
+		goto out;
+	writel_relaxed(readl_relaxed(info->rtsr) &
+		(RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
+	writel_relaxed(time, info->rtar);
+	if (alrm->enabled)
+		writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
+	else
+		writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
+out:
+	spin_unlock_irq(&info->lock);
+
+	return ret;
+}
+
+static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
+	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
+
+	return 0;
+}
+
+static const struct rtc_class_ops sa1100_rtc_ops = {
+	.read_time = sa1100_rtc_read_time,
+	.set_time = sa1100_rtc_set_time,
+	.read_alarm = sa1100_rtc_read_alarm,
+	.set_alarm = sa1100_rtc_set_alarm,
+	.proc = sa1100_rtc_proc,
+	.alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
+};
+
+int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
+{
+	struct rtc_device *rtc;
+	int ret;
+
+	spin_lock_init(&info->lock);
+
+	info->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed to find rtc clock source\n");
+		return PTR_ERR(info->clk);
+	}
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret)
+		return ret;
+	/*
+	 * According to the manual we should be able to let RTTR be zero
+	 * and then a default diviser for a 32.768KHz clock is used.
+	 * Apparently this doesn't work, at least for my SA1110 rev 5.
+	 * If the clock divider is uninitialized then reset it to the
+	 * default value to get the 1Hz clock.
+	 */
+	if (readl_relaxed(info->rttr) == 0) {
+		writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
+		dev_warn(&pdev->dev, "warning: "
+			"initializing default clock divider/trim value\n");
+		/* The current RTC value probably doesn't make sense either */
+		writel_relaxed(0, info->rcnr);
+	}
+
+	rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &sa1100_rtc_ops,
+					THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		clk_disable_unprepare(info->clk);
+		return PTR_ERR(rtc);
+	}
+	info->rtc = rtc;
+
+	rtc->max_user_freq = RTC_FREQ;
+	rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
+
+	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
+	 * See also the comments in sa1100_rtc_interrupt().
+	 *
+	 * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
+	 * interrupt pending, even though interrupts were never enabled.
+	 * In this case, this bit it must be reset before enabling
+	 * interruptions to avoid a nonexistent interrupt to occur.
+	 *
+	 * In principle, the same problem would apply to bit 0, although it has
+	 * never been observed to happen.
+	 *
+	 * This issue is addressed both here and in sa1100_rtc_interrupt().
+	 * If the issue is not addressed here, in the times when the processor
+	 * wakes up with the bit set there will be one spurious interrupt.
+	 *
+	 * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
+	 * safe side, once the condition that lead to this strange
+	 * initialization is unknown and could in principle happen during
+	 * normal processing.
+	 *
+	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
+	 * the corresponding bits in RTSR. */
+	writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sa1100_rtc_init);
+
+static int sa1100_rtc_probe(struct platform_device *pdev)
+{
+	struct sa1100_rtc *info;
+	struct resource *iores;
+	void __iomem *base;
+	int irq_1hz, irq_alarm;
+	int ret;
+
+	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+	irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+	if (irq_1hz < 0 || irq_alarm < 0)
+		return -ENODEV;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct sa1100_rtc), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->irq_1hz = irq_1hz;
+	info->irq_alarm = irq_alarm;
+
+	ret = devm_request_irq(&pdev->dev, irq_1hz, sa1100_rtc_interrupt, 0,
+			       "rtc 1Hz", &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_1hz);
+		return ret;
+	}
+	ret = devm_request_irq(&pdev->dev, irq_alarm, sa1100_rtc_interrupt, 0,
+			       "rtc Alrm", &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ %d already in use.\n", irq_alarm);
+		return ret;
+	}
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
+	    of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
+		info->rcnr = base + 0x04;
+		info->rtsr = base + 0x10;
+		info->rtar = base + 0x00;
+		info->rttr = base + 0x08;
+	} else {
+		info->rcnr = base + 0x0;
+		info->rtsr = base + 0x8;
+		info->rtar = base + 0x4;
+		info->rttr = base + 0xc;
+	}
+
+	platform_set_drvdata(pdev, info);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return sa1100_rtc_init(pdev, info);
+}
+
+static int sa1100_rtc_remove(struct platform_device *pdev)
+{
+	struct sa1100_rtc *info = platform_get_drvdata(pdev);
+
+	if (info) {
+		spin_lock_irq(&info->lock);
+		writel_relaxed(0, info->rtsr);
+		spin_unlock_irq(&info->lock);
+		clk_disable_unprepare(info->clk);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sa1100_rtc_suspend(struct device *dev)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	if (device_may_wakeup(dev))
+		enable_irq_wake(info->irq_alarm);
+	return 0;
+}
+
+static int sa1100_rtc_resume(struct device *dev)
+{
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	if (device_may_wakeup(dev))
+		disable_irq_wake(info->irq_alarm);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sa1100_rtc_pm_ops, sa1100_rtc_suspend,
+			sa1100_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sa1100_rtc_dt_ids[] = {
+	{ .compatible = "mrvl,sa1100-rtc", },
+	{ .compatible = "mrvl,mmp-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+#endif
+
+static struct platform_driver sa1100_rtc_driver = {
+	.probe		= sa1100_rtc_probe,
+	.remove		= sa1100_rtc_remove,
+	.driver		= {
+		.name	= "sa1100-rtc",
+		.pm	= &sa1100_rtc_pm_ops,
+		.of_match_table = of_match_ptr(sa1100_rtc_dt_ids),
+	},
+};
+
+module_platform_driver(sa1100_rtc_driver);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sa1100-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.h b/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.h
new file mode 100644
index 0000000..cc724f5
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sa1100.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __RTC_SA1100_H__
+#define __RTC_SA1100_H__
+
+#include <linux/kernel.h>
+
+struct clk;
+struct platform_device;
+
+struct sa1100_rtc {
+	spinlock_t		lock;
+	void __iomem		*rcnr;
+	void __iomem		*rtar;
+	void __iomem		*rtsr;
+	void __iomem		*rttr;
+	int			irq_1hz;
+	int			irq_alarm;
+	struct rtc_device	*rtc;
+	struct clk		*clk;
+};
+
+int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info);
+
+#endif
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sh.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sh.c
new file mode 100644
index 0000000..9b6a927
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sh.c
@@ -0,0 +1,777 @@
+/*
+ * SuperH On-Chip RTC Support
+ *
+ * Copyright (C) 2006 - 2009  Paul Mundt
+ * Copyright (C) 2006  Jamie Lenehan
+ * Copyright (C) 2008  Angelo Castello
+ *
+ * Based on the old arch/sh/kernel/cpu/rtc.c by:
+ *
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#ifdef CONFIG_SUPERH
+#include <asm/rtc.h>
+#else
+/* Default values for RZ/A RTC */
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED        0	/* no chip bugs */
+#define RTC_CAP_4_DIGIT_YEAR    (1 << 0)
+#define RTC_DEF_CAPABILITIES    RTC_CAP_4_DIGIT_YEAR
+#endif
+
+#define DRV_NAME	"sh-rtc"
+
+#define RTC_REG(r)	((r) * rtc_reg_size)
+
+#define R64CNT		RTC_REG(0)
+
+#define RSECCNT		RTC_REG(1)	/* RTC sec */
+#define RMINCNT		RTC_REG(2)	/* RTC min */
+#define RHRCNT		RTC_REG(3)	/* RTC hour */
+#define RWKCNT		RTC_REG(4)	/* RTC week */
+#define RDAYCNT		RTC_REG(5)	/* RTC day */
+#define RMONCNT		RTC_REG(6)	/* RTC month */
+#define RYRCNT		RTC_REG(7)	/* RTC year */
+#define RSECAR		RTC_REG(8)	/* ALARM sec */
+#define RMINAR		RTC_REG(9)	/* ALARM min */
+#define RHRAR		RTC_REG(10)	/* ALARM hour */
+#define RWKAR		RTC_REG(11)	/* ALARM week */
+#define RDAYAR		RTC_REG(12)	/* ALARM day */
+#define RMONAR		RTC_REG(13)	/* ALARM month */
+#define RCR1		RTC_REG(14)	/* Control */
+#define RCR2		RTC_REG(15)	/* Control */
+
+/*
+ * Note on RYRAR and RCR3: Up until this point most of the register
+ * definitions are consistent across all of the available parts. However,
+ * the placement of the optional RYRAR and RCR3 (the RYRAR control
+ * register used to control RYRCNT/RYRAR compare) varies considerably
+ * across various parts, occasionally being mapped in to a completely
+ * unrelated address space. For proper RYRAR support a separate resource
+ * would have to be handed off, but as this is purely optional in
+ * practice, we simply opt not to support it, thereby keeping the code
+ * quite a bit more simplified.
+ */
+
+/* ALARM Bits - or with BCD encoded value */
+#define AR_ENB		0x80	/* Enable for alarm cmp   */
+
+/* Period Bits */
+#define PF_HP		0x100	/* Enable Half Period to support 8,32,128Hz */
+#define PF_COUNT	0x200	/* Half periodic counter */
+#define PF_OXS		0x400	/* Periodic One x Second */
+#define PF_KOU		0x800	/* Kernel or User periodic request 1=kernel */
+#define PF_MASK		0xf00
+
+/* RCR1 Bits */
+#define RCR1_CF		0x80	/* Carry Flag             */
+#define RCR1_CIE	0x10	/* Carry Interrupt Enable */
+#define RCR1_AIE	0x08	/* Alarm Interrupt Enable */
+#define RCR1_AF		0x01	/* Alarm Flag             */
+
+/* RCR2 Bits */
+#define RCR2_PEF	0x80	/* PEriodic interrupt Flag */
+#define RCR2_PESMASK	0x70	/* Periodic interrupt Set  */
+#define RCR2_RTCEN	0x08	/* ENable RTC              */
+#define RCR2_ADJ	0x04	/* ADJustment (30-second)  */
+#define RCR2_RESET	0x02	/* Reset bit               */
+#define RCR2_START	0x01	/* Start bit               */
+
+struct sh_rtc {
+	void __iomem		*regbase;
+	unsigned long		regsize;
+	struct resource		*res;
+	int			alarm_irq;
+	int			periodic_irq;
+	int			carry_irq;
+	struct clk		*clk;
+	struct rtc_device	*rtc_dev;
+	spinlock_t		lock;
+	unsigned long		capabilities;	/* See asm/rtc.h for cap bits */
+	unsigned short		periodic_freq;
+};
+
+static int __sh_rtc_interrupt(struct sh_rtc *rtc)
+{
+	unsigned int tmp, pending;
+
+	tmp = readb(rtc->regbase + RCR1);
+	pending = tmp & RCR1_CF;
+	tmp &= ~RCR1_CF;
+	writeb(tmp, rtc->regbase + RCR1);
+
+	/* Users have requested One x Second IRQ */
+	if (pending && rtc->periodic_freq & PF_OXS)
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+
+	return pending;
+}
+
+static int __sh_rtc_alarm(struct sh_rtc *rtc)
+{
+	unsigned int tmp, pending;
+
+	tmp = readb(rtc->regbase + RCR1);
+	pending = tmp & RCR1_AF;
+	tmp &= ~(RCR1_AF | RCR1_AIE);
+	writeb(tmp, rtc->regbase + RCR1);
+
+	if (pending)
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+
+	return pending;
+}
+
+static int __sh_rtc_periodic(struct sh_rtc *rtc)
+{
+	struct rtc_device *rtc_dev = rtc->rtc_dev;
+	struct rtc_task *irq_task;
+	unsigned int tmp, pending;
+
+	tmp = readb(rtc->regbase + RCR2);
+	pending = tmp & RCR2_PEF;
+	tmp &= ~RCR2_PEF;
+	writeb(tmp, rtc->regbase + RCR2);
+
+	if (!pending)
+		return 0;
+
+	/* Half period enabled than one skipped and the next notified */
+	if ((rtc->periodic_freq & PF_HP) && (rtc->periodic_freq & PF_COUNT))
+		rtc->periodic_freq &= ~PF_COUNT;
+	else {
+		if (rtc->periodic_freq & PF_HP)
+			rtc->periodic_freq |= PF_COUNT;
+		if (rtc->periodic_freq & PF_KOU) {
+			spin_lock(&rtc_dev->irq_task_lock);
+			irq_task = rtc_dev->irq_task;
+			if (irq_task)
+				irq_task->func(irq_task->private_data);
+			spin_unlock(&rtc_dev->irq_task_lock);
+		} else
+			rtc_update_irq(rtc->rtc_dev, 1, RTC_PF | RTC_IRQF);
+	}
+
+	return pending;
+}
+
+static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
+{
+	struct sh_rtc *rtc = dev_id;
+	int ret;
+
+	spin_lock(&rtc->lock);
+	ret = __sh_rtc_interrupt(rtc);
+	spin_unlock(&rtc->lock);
+
+	return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_alarm(int irq, void *dev_id)
+{
+	struct sh_rtc *rtc = dev_id;
+	int ret;
+
+	spin_lock(&rtc->lock);
+	ret = __sh_rtc_alarm(rtc);
+	spin_unlock(&rtc->lock);
+
+	return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_periodic(int irq, void *dev_id)
+{
+	struct sh_rtc *rtc = dev_id;
+	int ret;
+
+	spin_lock(&rtc->lock);
+	ret = __sh_rtc_periodic(rtc);
+	spin_unlock(&rtc->lock);
+
+	return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_shared(int irq, void *dev_id)
+{
+	struct sh_rtc *rtc = dev_id;
+	int ret;
+
+	spin_lock(&rtc->lock);
+	ret = __sh_rtc_interrupt(rtc);
+	ret |= __sh_rtc_alarm(rtc);
+	ret |= __sh_rtc_periodic(rtc);
+	spin_unlock(&rtc->lock);
+
+	return IRQ_RETVAL(ret);
+}
+
+static int sh_rtc_irq_set_state(struct device *dev, int enable)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tmp;
+
+	spin_lock_irq(&rtc->lock);
+
+	tmp = readb(rtc->regbase + RCR2);
+
+	if (enable) {
+		rtc->periodic_freq |= PF_KOU;
+		tmp &= ~RCR2_PEF;	/* Clear PES bit */
+		tmp |= (rtc->periodic_freq & ~PF_HP);	/* Set PES2-0 */
+	} else {
+		rtc->periodic_freq &= ~PF_KOU;
+		tmp &= ~(RCR2_PESMASK | RCR2_PEF);
+	}
+
+	writeb(tmp, rtc->regbase + RCR2);
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static int sh_rtc_irq_set_freq(struct device *dev, int freq)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	int tmp, ret = 0;
+
+	spin_lock_irq(&rtc->lock);
+	tmp = rtc->periodic_freq & PF_MASK;
+
+	switch (freq) {
+	case 0:
+		rtc->periodic_freq = 0x00;
+		break;
+	case 1:
+		rtc->periodic_freq = 0x60;
+		break;
+	case 2:
+		rtc->periodic_freq = 0x50;
+		break;
+	case 4:
+		rtc->periodic_freq = 0x40;
+		break;
+	case 8:
+		rtc->periodic_freq = 0x30 | PF_HP;
+		break;
+	case 16:
+		rtc->periodic_freq = 0x30;
+		break;
+	case 32:
+		rtc->periodic_freq = 0x20 | PF_HP;
+		break;
+	case 64:
+		rtc->periodic_freq = 0x20;
+		break;
+	case 128:
+		rtc->periodic_freq = 0x10 | PF_HP;
+		break;
+	case 256:
+		rtc->periodic_freq = 0x10;
+		break;
+	default:
+		ret = -ENOTSUPP;
+	}
+
+	if (ret == 0)
+		rtc->periodic_freq |= tmp;
+
+	spin_unlock_irq(&rtc->lock);
+	return ret;
+}
+
+static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tmp;
+
+	spin_lock_irq(&rtc->lock);
+
+	tmp = readb(rtc->regbase + RCR1);
+
+	if (enable)
+		tmp |= RCR1_AIE;
+	else
+		tmp &= ~RCR1_AIE;
+
+	writeb(tmp, rtc->regbase + RCR1);
+
+	spin_unlock_irq(&rtc->lock);
+}
+
+static int sh_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tmp;
+
+	tmp = readb(rtc->regbase + RCR1);
+	seq_printf(seq, "carry_IRQ\t: %s\n", (tmp & RCR1_CIE) ? "yes" : "no");
+
+	tmp = readb(rtc->regbase + RCR2);
+	seq_printf(seq, "periodic_IRQ\t: %s\n",
+		   (tmp & RCR2_PESMASK) ? "yes" : "no");
+
+	return 0;
+}
+
+static inline void sh_rtc_setcie(struct device *dev, unsigned int enable)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tmp;
+
+	spin_lock_irq(&rtc->lock);
+
+	tmp = readb(rtc->regbase + RCR1);
+
+	if (!enable)
+		tmp &= ~RCR1_CIE;
+	else
+		tmp |= RCR1_CIE;
+
+	writeb(tmp, rtc->regbase + RCR1);
+
+	spin_unlock_irq(&rtc->lock);
+}
+
+static int sh_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	sh_rtc_setaie(dev, enabled);
+	return 0;
+}
+
+static int sh_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+	unsigned int sec128, sec2, yr, yr100, cf_bit;
+
+	do {
+		unsigned int tmp;
+
+		spin_lock_irq(&rtc->lock);
+
+		tmp = readb(rtc->regbase + RCR1);
+		tmp &= ~RCR1_CF; /* Clear CF-bit */
+		tmp |= RCR1_CIE;
+		writeb(tmp, rtc->regbase + RCR1);
+
+		sec128 = readb(rtc->regbase + R64CNT);
+
+		tm->tm_sec	= bcd2bin(readb(rtc->regbase + RSECCNT));
+		tm->tm_min	= bcd2bin(readb(rtc->regbase + RMINCNT));
+		tm->tm_hour	= bcd2bin(readb(rtc->regbase + RHRCNT));
+		tm->tm_wday	= bcd2bin(readb(rtc->regbase + RWKCNT));
+		tm->tm_mday	= bcd2bin(readb(rtc->regbase + RDAYCNT));
+		tm->tm_mon	= bcd2bin(readb(rtc->regbase + RMONCNT)) - 1;
+
+		if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) {
+			yr  = readw(rtc->regbase + RYRCNT);
+			yr100 = bcd2bin(yr >> 8);
+			yr &= 0xff;
+		} else {
+			yr  = readb(rtc->regbase + RYRCNT);
+			yr100 = bcd2bin((yr == 0x99) ? 0x19 : 0x20);
+		}
+
+		tm->tm_year = (yr100 * 100 + bcd2bin(yr)) - 1900;
+
+		sec2 = readb(rtc->regbase + R64CNT);
+		cf_bit = readb(rtc->regbase + RCR1) & RCR1_CF;
+
+		spin_unlock_irq(&rtc->lock);
+	} while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
+
+#if RTC_BIT_INVERTED != 0
+	if ((sec128 & RTC_BIT_INVERTED))
+		tm->tm_sec--;
+#endif
+
+	/* only keep the carry interrupt enabled if UIE is on */
+	if (!(rtc->periodic_freq & PF_OXS))
+		sh_rtc_setcie(dev, 0);
+
+	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
+
+	return rtc_valid_tm(tm);
+}
+
+static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+	unsigned int tmp;
+	int year;
+
+	spin_lock_irq(&rtc->lock);
+
+	/* Reset pre-scaler & stop RTC */
+	tmp = readb(rtc->regbase + RCR2);
+	tmp |= RCR2_RESET;
+	tmp &= ~RCR2_START;
+	writeb(tmp, rtc->regbase + RCR2);
+
+	writeb(bin2bcd(tm->tm_sec),  rtc->regbase + RSECCNT);
+	writeb(bin2bcd(tm->tm_min),  rtc->regbase + RMINCNT);
+	writeb(bin2bcd(tm->tm_hour), rtc->regbase + RHRCNT);
+	writeb(bin2bcd(tm->tm_wday), rtc->regbase + RWKCNT);
+	writeb(bin2bcd(tm->tm_mday), rtc->regbase + RDAYCNT);
+	writeb(bin2bcd(tm->tm_mon + 1), rtc->regbase + RMONCNT);
+
+	if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) {
+		year = (bin2bcd((tm->tm_year + 1900) / 100) << 8) |
+			bin2bcd(tm->tm_year % 100);
+		writew(year, rtc->regbase + RYRCNT);
+	} else {
+		year = tm->tm_year % 100;
+		writeb(bin2bcd(year), rtc->regbase + RYRCNT);
+	}
+
+	/* Start RTC */
+	tmp = readb(rtc->regbase + RCR2);
+	tmp &= ~RCR2_RESET;
+	tmp |= RCR2_RTCEN | RCR2_START;
+	writeb(tmp, rtc->regbase + RCR2);
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
+{
+	unsigned int byte;
+	int value = -1;			/* return -1 for ignored values */
+
+	byte = readb(rtc->regbase + reg_off);
+	if (byte & AR_ENB) {
+		byte &= ~AR_ENB;	/* strip the enable bit */
+		value = bcd2bin(byte);
+	}
+
+	return value;
+}
+
+static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+	struct rtc_time *tm = &wkalrm->time;
+
+	spin_lock_irq(&rtc->lock);
+
+	tm->tm_sec	= sh_rtc_read_alarm_value(rtc, RSECAR);
+	tm->tm_min	= sh_rtc_read_alarm_value(rtc, RMINAR);
+	tm->tm_hour	= sh_rtc_read_alarm_value(rtc, RHRAR);
+	tm->tm_wday	= sh_rtc_read_alarm_value(rtc, RWKAR);
+	tm->tm_mday	= sh_rtc_read_alarm_value(rtc, RDAYAR);
+	tm->tm_mon	= sh_rtc_read_alarm_value(rtc, RMONAR);
+	if (tm->tm_mon > 0)
+		tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
+	wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
+					    int value, int reg_off)
+{
+	/* < 0 for a value that is ignored */
+	if (value < 0)
+		writeb(0, rtc->regbase + reg_off);
+	else
+		writeb(bin2bcd(value) | AR_ENB,  rtc->regbase + reg_off);
+}
+
+static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+	unsigned int rcr1;
+	struct rtc_time *tm = &wkalrm->time;
+	int mon;
+
+	spin_lock_irq(&rtc->lock);
+
+	/* disable alarm interrupt and clear the alarm flag */
+	rcr1 = readb(rtc->regbase + RCR1);
+	rcr1 &= ~(RCR1_AF | RCR1_AIE);
+	writeb(rcr1, rtc->regbase + RCR1);
+
+	/* set alarm time */
+	sh_rtc_write_alarm_value(rtc, tm->tm_sec,  RSECAR);
+	sh_rtc_write_alarm_value(rtc, tm->tm_min,  RMINAR);
+	sh_rtc_write_alarm_value(rtc, tm->tm_hour, RHRAR);
+	sh_rtc_write_alarm_value(rtc, tm->tm_wday, RWKAR);
+	sh_rtc_write_alarm_value(rtc, tm->tm_mday, RDAYAR);
+	mon = tm->tm_mon;
+	if (mon >= 0)
+		mon += 1;
+	sh_rtc_write_alarm_value(rtc, mon, RMONAR);
+
+	if (wkalrm->enabled) {
+		rcr1 |= RCR1_AIE;
+		writeb(rcr1, rtc->regbase + RCR1);
+	}
+
+	spin_unlock_irq(&rtc->lock);
+
+	return 0;
+}
+
+static const struct rtc_class_ops sh_rtc_ops = {
+	.read_time	= sh_rtc_read_time,
+	.set_time	= sh_rtc_set_time,
+	.read_alarm	= sh_rtc_read_alarm,
+	.set_alarm	= sh_rtc_set_alarm,
+	.proc		= sh_rtc_proc,
+	.alarm_irq_enable = sh_rtc_alarm_irq_enable,
+};
+
+static int __init sh_rtc_probe(struct platform_device *pdev)
+{
+	struct sh_rtc *rtc;
+	struct resource *res;
+	struct rtc_time r;
+	char clk_name[6];
+	int clk_id, ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (unlikely(!rtc))
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+
+	/* get periodic/carry/alarm irqs */
+	ret = platform_get_irq(pdev, 0);
+	if (unlikely(ret <= 0)) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return -ENOENT;
+	}
+
+	rtc->periodic_irq = ret;
+	rtc->carry_irq = platform_get_irq(pdev, 1);
+	rtc->alarm_irq = platform_get_irq(pdev, 2);
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(res == NULL)) {
+		dev_err(&pdev->dev, "No IO resource\n");
+		return -ENOENT;
+	}
+
+	rtc->regsize = resource_size(res);
+
+	rtc->res = devm_request_mem_region(&pdev->dev, res->start,
+					rtc->regsize, pdev->name);
+	if (unlikely(!rtc->res))
+		return -EBUSY;
+
+	rtc->regbase = devm_ioremap_nocache(&pdev->dev, rtc->res->start,
+					rtc->regsize);
+	if (unlikely(!rtc->regbase))
+		return -EINVAL;
+
+	if (!pdev->dev.of_node) {
+		clk_id = pdev->id;
+		/* With a single device, the clock id is still "rtc0" */
+		if (clk_id < 0)
+			clk_id = 0;
+
+		snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+	} else
+		snprintf(clk_name, sizeof(clk_name), "fck");
+
+	rtc->clk = devm_clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(rtc->clk)) {
+		/*
+		 * No error handling for rtc->clk intentionally, not all
+		 * platforms will have a unique clock for the RTC, and
+		 * the clk API can handle the struct clk pointer being
+		 * NULL.
+		 */
+		rtc->clk = NULL;
+	}
+
+	clk_enable(rtc->clk);
+
+	rtc->capabilities = RTC_DEF_CAPABILITIES;
+
+#ifdef CONFIG_SUPERH
+	if (dev_get_platdata(&pdev->dev)) {
+		struct sh_rtc_platform_info *pinfo =
+			dev_get_platdata(&pdev->dev);
+
+		/*
+		 * Some CPUs have special capabilities in addition to the
+		 * default set. Add those in here.
+		 */
+		rtc->capabilities |= pinfo->capabilities;
+	}
+#endif
+
+	if (rtc->carry_irq <= 0) {
+		/* register shared periodic/carry/alarm irq */
+		ret = devm_request_irq(&pdev->dev, rtc->periodic_irq,
+				sh_rtc_shared, 0, "sh-rtc", rtc);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev,
+				"request IRQ failed with %d, IRQ %d\n", ret,
+				rtc->periodic_irq);
+			goto err_unmap;
+		}
+	} else {
+		/* register periodic/carry/alarm irqs */
+		ret = devm_request_irq(&pdev->dev, rtc->periodic_irq,
+				sh_rtc_periodic, 0, "sh-rtc period", rtc);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev,
+				"request period IRQ failed with %d, IRQ %d\n",
+				ret, rtc->periodic_irq);
+			goto err_unmap;
+		}
+
+		ret = devm_request_irq(&pdev->dev, rtc->carry_irq,
+				sh_rtc_interrupt, 0, "sh-rtc carry", rtc);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev,
+				"request carry IRQ failed with %d, IRQ %d\n",
+				ret, rtc->carry_irq);
+			goto err_unmap;
+		}
+
+		ret = devm_request_irq(&pdev->dev, rtc->alarm_irq,
+				sh_rtc_alarm, 0, "sh-rtc alarm", rtc);
+		if (unlikely(ret)) {
+			dev_err(&pdev->dev,
+				"request alarm IRQ failed with %d, IRQ %d\n",
+				ret, rtc->alarm_irq);
+			goto err_unmap;
+		}
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	/* everything disabled by default */
+	sh_rtc_irq_set_freq(&pdev->dev, 0);
+	sh_rtc_irq_set_state(&pdev->dev, 0);
+	sh_rtc_setaie(&pdev->dev, 0);
+	sh_rtc_setcie(&pdev->dev, 0);
+
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, "sh",
+					   &sh_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_unmap;
+	}
+
+	rtc->rtc_dev->max_user_freq = 256;
+
+	/* reset rtc to epoch 0 if time is invalid */
+	if (rtc_read_time(rtc->rtc_dev, &r) < 0) {
+		rtc_time_to_tm(0, &r);
+		rtc_set_time(rtc->rtc_dev, &r);
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	return 0;
+
+err_unmap:
+	clk_disable(rtc->clk);
+
+	return ret;
+}
+
+static int __exit sh_rtc_remove(struct platform_device *pdev)
+{
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+
+	sh_rtc_irq_set_state(&pdev->dev, 0);
+
+	sh_rtc_setaie(&pdev->dev, 0);
+	sh_rtc_setcie(&pdev->dev, 0);
+
+	clk_disable(rtc->clk);
+
+	return 0;
+}
+
+static void sh_rtc_set_irq_wake(struct device *dev, int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+
+	irq_set_irq_wake(rtc->periodic_irq, enabled);
+
+	if (rtc->carry_irq > 0) {
+		irq_set_irq_wake(rtc->carry_irq, enabled);
+		irq_set_irq_wake(rtc->alarm_irq, enabled);
+	}
+}
+
+static int __maybe_unused sh_rtc_suspend(struct device *dev)
+{
+	if (device_may_wakeup(dev))
+		sh_rtc_set_irq_wake(dev, 1);
+
+	return 0;
+}
+
+static int __maybe_unused sh_rtc_resume(struct device *dev)
+{
+	if (device_may_wakeup(dev))
+		sh_rtc_set_irq_wake(dev, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sh_rtc_pm_ops, sh_rtc_suspend, sh_rtc_resume);
+
+static const struct of_device_id sh_rtc_of_match[] = {
+	{ .compatible = "renesas,sh-rtc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sh_rtc_of_match);
+
+static struct platform_driver sh_rtc_platform_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.pm	= &sh_rtc_pm_ops,
+		.of_match_table = sh_rtc_of_match,
+	},
+	.remove		= __exit_p(sh_rtc_remove),
+};
+
+module_platform_driver_probe(sh_rtc_platform_driver, sh_rtc_probe);
+
+MODULE_DESCRIPTION("SuperH on-chip RTC driver");
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, "
+	      "Jamie Lenehan <lenehan@twibble.org>, "
+	      "Angelo Castello <angelo.castello@st.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sirfsoc.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sirfsoc.c
new file mode 100644
index 0000000..7367f61
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sirfsoc.c
@@ -0,0 +1,479 @@
+/*
+ * SiRFSoC Real Time Clock interface for Linux
+ *
+ * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+
+
+#define RTC_CN			0x00
+#define RTC_ALARM0		0x04
+#define RTC_ALARM1		0x18
+#define RTC_STATUS		0x08
+#define RTC_SW_VALUE            0x40
+#define SIRFSOC_RTC_AL1E	(1<<6)
+#define SIRFSOC_RTC_AL1		(1<<4)
+#define SIRFSOC_RTC_HZE		(1<<3)
+#define SIRFSOC_RTC_AL0E	(1<<2)
+#define SIRFSOC_RTC_HZ		(1<<1)
+#define SIRFSOC_RTC_AL0		(1<<0)
+#define RTC_DIV			0x0c
+#define RTC_DEEP_CTRL		0x14
+#define RTC_CLOCK_SWITCH	0x1c
+#define SIRFSOC_RTC_CLK		0x03	/* others are reserved */
+
+/* Refer to RTC DIV switch */
+#define RTC_HZ			16
+
+/* This macro is also defined in arch/arm/plat-sirfsoc/cpu.c */
+#define RTC_SHIFT		4
+
+#define INTR_SYSRTC_CN		0x48
+
+struct sirfsoc_rtc_drv {
+	struct rtc_device	*rtc;
+	u32			rtc_base;
+	u32			irq;
+	unsigned		irq_wake;
+	/* Overflow for every 8 years extra time */
+	u32			overflow_rtc;
+	spinlock_t		lock;
+	struct regmap *regmap;
+#ifdef CONFIG_PM
+	u32		saved_counter;
+	u32		saved_overflow_rtc;
+#endif
+};
+
+static u32 sirfsoc_rtc_readl(struct sirfsoc_rtc_drv *rtcdrv, u32 offset)
+{
+	u32 val;
+
+	regmap_read(rtcdrv->regmap, rtcdrv->rtc_base + offset, &val);
+	return val;
+}
+
+static void sirfsoc_rtc_writel(struct sirfsoc_rtc_drv *rtcdrv,
+			       u32 offset, u32 val)
+{
+	regmap_write(rtcdrv->regmap, rtcdrv->rtc_base + offset, val);
+}
+
+static int sirfsoc_rtc_read_alarm(struct device *dev,
+		struct rtc_wkalrm *alrm)
+{
+	unsigned long rtc_alarm, rtc_count;
+	struct sirfsoc_rtc_drv *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+
+	spin_lock_irq(&rtcdrv->lock);
+
+	rtc_count = sirfsoc_rtc_readl(rtcdrv, RTC_CN);
+
+	rtc_alarm = sirfsoc_rtc_readl(rtcdrv, RTC_ALARM0);
+	memset(alrm, 0, sizeof(struct rtc_wkalrm));
+
+	/*
+	 * assume alarm interval not beyond one round counter overflow_rtc:
+	 * 0->0xffffffff
+	 */
+	/* if alarm is in next overflow cycle */
+	if (rtc_count > rtc_alarm)
+		rtc_time_to_tm((rtcdrv->overflow_rtc + 1)
+				<< (BITS_PER_LONG - RTC_SHIFT)
+				| rtc_alarm >> RTC_SHIFT, &(alrm->time));
+	else
+		rtc_time_to_tm(rtcdrv->overflow_rtc
+				<< (BITS_PER_LONG - RTC_SHIFT)
+				| rtc_alarm >> RTC_SHIFT, &(alrm->time));
+	if (sirfsoc_rtc_readl(rtcdrv, RTC_STATUS) & SIRFSOC_RTC_AL0E)
+		alrm->enabled = 1;
+
+	spin_unlock_irq(&rtcdrv->lock);
+
+	return 0;
+}
+
+static int sirfsoc_rtc_set_alarm(struct device *dev,
+		struct rtc_wkalrm *alrm)
+{
+	unsigned long rtc_status_reg, rtc_alarm;
+	struct sirfsoc_rtc_drv *rtcdrv;
+	rtcdrv = dev_get_drvdata(dev);
+
+	if (alrm->enabled) {
+		rtc_tm_to_time(&(alrm->time), &rtc_alarm);
+
+		spin_lock_irq(&rtcdrv->lock);
+
+		rtc_status_reg = sirfsoc_rtc_readl(rtcdrv, RTC_STATUS);
+		if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
+			/*
+			 * An ongoing alarm in progress - ingore it and not
+			 * to return EBUSY
+			 */
+			dev_info(dev, "An old alarm was set, will be replaced by a new one\n");
+		}
+
+		sirfsoc_rtc_writel(rtcdrv, RTC_ALARM0, rtc_alarm << RTC_SHIFT);
+		rtc_status_reg &= ~0x07; /* mask out the lower status bits */
+		/*
+		 * This bit RTC_AL sets it as a wake-up source for Sleep Mode
+		 * Writing 1 into this bit will clear it
+		 */
+		rtc_status_reg |= SIRFSOC_RTC_AL0;
+		/* enable the RTC alarm interrupt */
+		rtc_status_reg |= SIRFSOC_RTC_AL0E;
+		sirfsoc_rtc_writel(rtcdrv, RTC_STATUS, rtc_status_reg);
+
+		spin_unlock_irq(&rtcdrv->lock);
+	} else {
+		/*
+		 * if this function was called with enabled=0
+		 * then it could mean that the application is
+		 * trying to cancel an ongoing alarm
+		 */
+		spin_lock_irq(&rtcdrv->lock);
+
+		rtc_status_reg = sirfsoc_rtc_readl(rtcdrv, RTC_STATUS);
+		if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
+			/* clear the RTC status register's alarm bit */
+			rtc_status_reg &= ~0x07;
+			/* write 1 into SIRFSOC_RTC_AL0 to force a clear */
+			rtc_status_reg |= (SIRFSOC_RTC_AL0);
+			/* Clear the Alarm enable bit */
+			rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
+
+			sirfsoc_rtc_writel(rtcdrv, RTC_STATUS,
+					   rtc_status_reg);
+		}
+
+		spin_unlock_irq(&rtcdrv->lock);
+	}
+
+	return 0;
+}
+
+static int sirfsoc_rtc_read_time(struct device *dev,
+		struct rtc_time *tm)
+{
+	unsigned long tmp_rtc = 0;
+	struct sirfsoc_rtc_drv *rtcdrv;
+	rtcdrv = dev_get_drvdata(dev);
+	/*
+	 * This patch is taken from WinCE - Need to validate this for
+	 * correctness. To work around sirfsoc RTC counter double sync logic
+	 * fail, read several times to make sure get stable value.
+	 */
+	do {
+		tmp_rtc = sirfsoc_rtc_readl(rtcdrv, RTC_CN);
+		cpu_relax();
+	} while (tmp_rtc != sirfsoc_rtc_readl(rtcdrv, RTC_CN));
+
+	rtc_time_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT) |
+					tmp_rtc >> RTC_SHIFT, tm);
+	return 0;
+}
+
+static int sirfsoc_rtc_set_time(struct device *dev,
+		struct rtc_time *tm)
+{
+	unsigned long rtc_time;
+	struct sirfsoc_rtc_drv *rtcdrv;
+	rtcdrv = dev_get_drvdata(dev);
+
+	rtc_tm_to_time(tm, &rtc_time);
+
+	rtcdrv->overflow_rtc = rtc_time >> (BITS_PER_LONG - RTC_SHIFT);
+
+	sirfsoc_rtc_writel(rtcdrv, RTC_SW_VALUE, rtcdrv->overflow_rtc);
+	sirfsoc_rtc_writel(rtcdrv, RTC_CN, rtc_time << RTC_SHIFT);
+
+	return 0;
+}
+
+static int sirfsoc_rtc_ioctl(struct device *dev, unsigned int cmd,
+		unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_PIE_ON:
+	case RTC_PIE_OFF:
+	case RTC_UIE_ON:
+	case RTC_UIE_OFF:
+	case RTC_AIE_ON:
+	case RTC_AIE_OFF:
+		return 0;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static int sirfsoc_rtc_alarm_irq_enable(struct device *dev,
+		unsigned int enabled)
+{
+	unsigned long rtc_status_reg = 0x0;
+	struct sirfsoc_rtc_drv *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+
+	spin_lock_irq(&rtcdrv->lock);
+
+	rtc_status_reg = sirfsoc_rtc_readl(rtcdrv, RTC_STATUS);
+	if (enabled)
+		rtc_status_reg |= SIRFSOC_RTC_AL0E;
+	else
+		rtc_status_reg &= ~SIRFSOC_RTC_AL0E;
+
+	sirfsoc_rtc_writel(rtcdrv, RTC_STATUS, rtc_status_reg);
+
+	spin_unlock_irq(&rtcdrv->lock);
+
+	return 0;
+
+}
+
+static const struct rtc_class_ops sirfsoc_rtc_ops = {
+	.read_time = sirfsoc_rtc_read_time,
+	.set_time = sirfsoc_rtc_set_time,
+	.read_alarm = sirfsoc_rtc_read_alarm,
+	.set_alarm = sirfsoc_rtc_set_alarm,
+	.ioctl = sirfsoc_rtc_ioctl,
+	.alarm_irq_enable = sirfsoc_rtc_alarm_irq_enable
+};
+
+static irqreturn_t sirfsoc_rtc_irq_handler(int irq, void *pdata)
+{
+	struct sirfsoc_rtc_drv *rtcdrv = pdata;
+	unsigned long rtc_status_reg = 0x0;
+	unsigned long events = 0x0;
+
+	spin_lock(&rtcdrv->lock);
+
+	rtc_status_reg = sirfsoc_rtc_readl(rtcdrv, RTC_STATUS);
+	/* this bit will be set ONLY if an alarm was active
+	 * and it expired NOW
+	 * So this is being used as an ASSERT
+	 */
+	if (rtc_status_reg & SIRFSOC_RTC_AL0) {
+		/*
+		 * clear the RTC status register's alarm bit
+		 * mask out the lower status bits
+		 */
+		rtc_status_reg &= ~0x07;
+		/* write 1 into SIRFSOC_RTC_AL0 to ACK the alarm interrupt */
+		rtc_status_reg |= (SIRFSOC_RTC_AL0);
+		/* Clear the Alarm enable bit */
+		rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
+	}
+
+	sirfsoc_rtc_writel(rtcdrv, RTC_STATUS, rtc_status_reg);
+
+	spin_unlock(&rtcdrv->lock);
+
+	/* this should wake up any apps polling/waiting on the read
+	 * after setting the alarm
+	 */
+	events |= RTC_IRQF | RTC_AF;
+	rtc_update_irq(rtcdrv->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id sirfsoc_rtc_of_match[] = {
+	{ .compatible = "sirf,prima2-sysrtc"},
+	{},
+};
+
+const struct regmap_config sysrtc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+MODULE_DEVICE_TABLE(of, sirfsoc_rtc_of_match);
+
+static int sirfsoc_rtc_probe(struct platform_device *pdev)
+{
+	int err;
+	unsigned long rtc_div;
+	struct sirfsoc_rtc_drv *rtcdrv;
+	struct device_node *np = pdev->dev.of_node;
+
+	rtcdrv = devm_kzalloc(&pdev->dev,
+		sizeof(struct sirfsoc_rtc_drv), GFP_KERNEL);
+	if (rtcdrv == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&rtcdrv->lock);
+
+	err = of_property_read_u32(np, "reg", &rtcdrv->rtc_base);
+	if (err) {
+		dev_err(&pdev->dev, "unable to find base address of rtc node in dtb\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, rtcdrv);
+
+	/* Register rtc alarm as a wakeup source */
+	device_init_wakeup(&pdev->dev, 1);
+
+	rtcdrv->regmap = devm_regmap_init_iobg(&pdev->dev,
+			&sysrtc_regmap_config);
+	if (IS_ERR(rtcdrv->regmap)) {
+		err = PTR_ERR(rtcdrv->regmap);
+		dev_err(&pdev->dev, "Failed to allocate register map: %d\n",
+			err);
+		return err;
+	}
+
+	/*
+	 * Set SYS_RTC counter in RTC_HZ HZ Units
+	 * We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
+	 * If 16HZ, therefore RTC_DIV = 1023;
+	 */
+	rtc_div = ((32768 / RTC_HZ) / 2) - 1;
+	sirfsoc_rtc_writel(rtcdrv, RTC_DIV, rtc_div);
+
+	/* 0x3 -> RTC_CLK */
+	sirfsoc_rtc_writel(rtcdrv, RTC_CLOCK_SWITCH, SIRFSOC_RTC_CLK);
+
+	/* reset SYS RTC ALARM0 */
+	sirfsoc_rtc_writel(rtcdrv, RTC_ALARM0, 0x0);
+
+	/* reset SYS RTC ALARM1 */
+	sirfsoc_rtc_writel(rtcdrv, RTC_ALARM1, 0x0);
+
+	/* Restore RTC Overflow From Register After Command Reboot */
+	rtcdrv->overflow_rtc =
+		sirfsoc_rtc_readl(rtcdrv, RTC_SW_VALUE);
+
+	rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+			&sirfsoc_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtcdrv->rtc)) {
+		err = PTR_ERR(rtcdrv->rtc);
+		dev_err(&pdev->dev, "can't register RTC device\n");
+		return err;
+	}
+
+	rtcdrv->irq = platform_get_irq(pdev, 0);
+	err = devm_request_irq(
+			&pdev->dev,
+			rtcdrv->irq,
+			sirfsoc_rtc_irq_handler,
+			IRQF_SHARED,
+			pdev->name,
+			rtcdrv);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to register for the SiRF SOC RTC IRQ\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int sirfsoc_rtc_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sirfsoc_rtc_suspend(struct device *dev)
+{
+	struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
+	rtcdrv->overflow_rtc =
+		sirfsoc_rtc_readl(rtcdrv, RTC_SW_VALUE);
+
+	rtcdrv->saved_counter =
+		sirfsoc_rtc_readl(rtcdrv, RTC_CN);
+	rtcdrv->saved_overflow_rtc = rtcdrv->overflow_rtc;
+	if (device_may_wakeup(dev) && !enable_irq_wake(rtcdrv->irq))
+		rtcdrv->irq_wake = 1;
+
+	return 0;
+}
+
+static int sirfsoc_rtc_resume(struct device *dev)
+{
+	u32 tmp;
+	struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
+
+	/*
+	 * if resume from snapshot and the rtc power is lost,
+	 * restroe the rtc settings
+	 */
+	if (SIRFSOC_RTC_CLK != sirfsoc_rtc_readl(rtcdrv, RTC_CLOCK_SWITCH)) {
+		u32 rtc_div;
+		/* 0x3 -> RTC_CLK */
+		sirfsoc_rtc_writel(rtcdrv, RTC_CLOCK_SWITCH, SIRFSOC_RTC_CLK);
+		/*
+		 * Set SYS_RTC counter in RTC_HZ HZ Units
+		 * We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
+		 * If 16HZ, therefore RTC_DIV = 1023;
+		 */
+		rtc_div = ((32768 / RTC_HZ) / 2) - 1;
+
+		sirfsoc_rtc_writel(rtcdrv, RTC_DIV, rtc_div);
+
+		/* reset SYS RTC ALARM0 */
+		sirfsoc_rtc_writel(rtcdrv, RTC_ALARM0, 0x0);
+
+		/* reset SYS RTC ALARM1 */
+		sirfsoc_rtc_writel(rtcdrv, RTC_ALARM1, 0x0);
+	}
+	rtcdrv->overflow_rtc = rtcdrv->saved_overflow_rtc;
+
+	/*
+	 * if current counter is small than previous,
+	 * it means overflow in sleep
+	 */
+	tmp = sirfsoc_rtc_readl(rtcdrv, RTC_CN);
+	if (tmp <= rtcdrv->saved_counter)
+		rtcdrv->overflow_rtc++;
+	/*
+	 *PWRC Value Be Changed When Suspend, Restore Overflow
+	 * In Memory To Register
+	 */
+	sirfsoc_rtc_writel(rtcdrv, RTC_SW_VALUE, rtcdrv->overflow_rtc);
+
+	if (device_may_wakeup(dev) && rtcdrv->irq_wake) {
+		disable_irq_wake(rtcdrv->irq);
+		rtcdrv->irq_wake = 0;
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sirfsoc_rtc_pm_ops,
+		sirfsoc_rtc_suspend, sirfsoc_rtc_resume);
+
+static struct platform_driver sirfsoc_rtc_driver = {
+	.driver = {
+		.name = "sirfsoc-rtc",
+		.pm = &sirfsoc_rtc_pm_ops,
+		.of_match_table = sirfsoc_rtc_of_match,
+	},
+	.probe = sirfsoc_rtc_probe,
+	.remove = sirfsoc_rtc_remove,
+};
+module_platform_driver(sirfsoc_rtc_driver);
+
+MODULE_DESCRIPTION("SiRF SoC rtc driver");
+MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sirfsoc-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-snvs.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-snvs.c
new file mode 100644
index 0000000..7aa2c5e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-snvs.c
@@ -0,0 +1,439 @@
+/*
+ * Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_LPREGISTER_OFFSET	0x34
+
+/* These register offsets are relative to LP (Low Power) range */
+#define SNVS_LPCR		0x04
+#define SNVS_LPSR		0x18
+#define SNVS_LPSRTCMR		0x1c
+#define SNVS_LPSRTCLR		0x20
+#define SNVS_LPTAR		0x24
+#define SNVS_LPPGDR		0x30
+
+#define SNVS_LPCR_SRTC_ENV	(1 << 0)
+#define SNVS_LPCR_LPTA_EN	(1 << 1)
+#define SNVS_LPCR_LPWUI_EN	(1 << 3)
+#define SNVS_LPSR_LPTA		(1 << 0)
+
+#define SNVS_LPPGDR_INIT	0x41736166
+#define CNTR_TO_SECS_SH		15
+
+struct snvs_rtc_data {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+	int offset;
+	int irq;
+	struct clk *clk;
+};
+
+/* Read 64 bit timer register, which could be in inconsistent state */
+static u64 rtc_read_lpsrt(struct snvs_rtc_data *data)
+{
+	u32 msb, lsb;
+
+	regmap_read(data->regmap, data->offset + SNVS_LPSRTCMR, &msb);
+	regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &lsb);
+	return (u64)msb << 32 | lsb;
+}
+
+/* Read the secure real time counter, taking care to deal with the cases of the
+ * counter updating while being read.
+ */
+static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
+{
+	u64 read1, read2;
+	unsigned int timeout = 100;
+
+	/* As expected, the registers might update between the read of the LSB
+	 * reg and the MSB reg.  It's also possible that one register might be
+	 * in partially modified state as well.
+	 */
+	read1 = rtc_read_lpsrt(data);
+	do {
+		read2 = read1;
+		read1 = rtc_read_lpsrt(data);
+	} while (read1 != read2 && --timeout);
+	if (!timeout)
+		dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
+
+	/* Convert 47-bit counter to 32-bit raw second count */
+	return (u32) (read1 >> CNTR_TO_SECS_SH);
+}
+
+/* Just read the lsb from the counter, dealing with inconsistent state */
+static int rtc_read_lp_counter_lsb(struct snvs_rtc_data *data, u32 *lsb)
+{
+	u32 count1, count2;
+	unsigned int timeout = 100;
+
+	regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
+	do {
+		count2 = count1;
+		regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
+	} while (count1 != count2 && --timeout);
+	if (!timeout) {
+		dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
+		return -ETIMEDOUT;
+	}
+
+	*lsb = count1;
+	return 0;
+}
+
+static int rtc_write_sync_lp(struct snvs_rtc_data *data)
+{
+	u32 count1, count2;
+	u32 elapsed;
+	unsigned int timeout = 1000;
+	int ret;
+
+	ret = rtc_read_lp_counter_lsb(data, &count1);
+	if (ret)
+		return ret;
+
+	/* Wait for 3 CKIL cycles, about 61.0-91.5 µs */
+	do {
+		ret = rtc_read_lp_counter_lsb(data, &count2);
+		if (ret)
+			return ret;
+		elapsed = count2 - count1; /* wrap around _is_ handled! */
+	} while (elapsed < 3 && --timeout);
+	if (!timeout) {
+		dev_err(&data->rtc->dev, "Timeout waiting for LPSRT Counter to change\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
+{
+	int timeout = 1000;
+	u32 lpcr;
+
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_SRTC_ENV,
+			   enable ? SNVS_LPCR_SRTC_ENV : 0);
+
+	while (--timeout) {
+		regmap_read(data->regmap, data->offset + SNVS_LPCR, &lpcr);
+
+		if (enable) {
+			if (lpcr & SNVS_LPCR_SRTC_ENV)
+				break;
+		} else {
+			if (!(lpcr & SNVS_LPCR_SRTC_ENV))
+				break;
+		}
+	}
+
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+	unsigned long time = rtc_read_lp_counter(data);
+
+	rtc_time_to_tm(time, tm);
+
+	return 0;
+}
+
+static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+	unsigned long time;
+	int ret;
+
+	rtc_tm_to_time(tm, &time);
+
+	/* Disable RTC first */
+	ret = snvs_rtc_enable(data, false);
+	if (ret)
+		return ret;
+
+	/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
+
+	/* Enable RTC again */
+	ret = snvs_rtc_enable(data, true);
+
+	return ret;
+}
+
+static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+	u32 lptar, lpsr;
+
+	regmap_read(data->regmap, data->offset + SNVS_LPTAR, &lptar);
+	rtc_time_to_tm(lptar, &alrm->time);
+
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
+	alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0;
+
+	return 0;
+}
+
+static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
+			   (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
+			   enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0);
+
+	return rtc_write_sync_lp(data);
+}
+
+static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time *alrm_tm = &alrm->time;
+	unsigned long time;
+	int ret;
+
+	rtc_tm_to_time(alrm_tm, &time);
+
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0);
+	ret = rtc_write_sync_lp(data);
+	if (ret)
+		return ret;
+	regmap_write(data->regmap, data->offset + SNVS_LPTAR, time);
+
+	/* Clear alarm interrupt status bit */
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, SNVS_LPSR_LPTA);
+
+	return snvs_rtc_alarm_irq_enable(dev, alrm->enabled);
+}
+
+static const struct rtc_class_ops snvs_rtc_ops = {
+	.read_time = snvs_rtc_read_time,
+	.set_time = snvs_rtc_set_time,
+	.read_alarm = snvs_rtc_read_alarm,
+	.set_alarm = snvs_rtc_set_alarm,
+	.alarm_irq_enable = snvs_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+	u32 lpsr;
+	u32 events = 0;
+
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
+
+	if (lpsr & SNVS_LPSR_LPTA) {
+		events |= (RTC_AF | RTC_IRQF);
+
+		/* RTC alarm should be one-shot */
+		snvs_rtc_alarm_irq_enable(dev, 0);
+
+		rtc_update_irq(data->rtc, 1, events);
+	}
+
+	/* clear interrupt status */
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);
+
+	return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static const struct regmap_config snvs_rtc_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int snvs_rtc_probe(struct platform_device *pdev)
+{
+	struct snvs_rtc_data *data;
+	struct resource *res;
+	int ret;
+	void __iomem *mmio;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(data->rtc))
+		return PTR_ERR(data->rtc);
+
+	data->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
+
+	if (IS_ERR(data->regmap)) {
+		dev_warn(&pdev->dev, "snvs rtc: you use old dts file, please update it\n");
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+		mmio = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(mmio))
+			return PTR_ERR(mmio);
+
+		data->regmap = devm_regmap_init_mmio(&pdev->dev, mmio, &snvs_rtc_config);
+	} else {
+		data->offset = SNVS_LPREGISTER_OFFSET;
+		of_property_read_u32(pdev->dev.of_node, "offset", &data->offset);
+	}
+
+	if (IS_ERR(data->regmap)) {
+		dev_err(&pdev->dev, "Can't find snvs syscon\n");
+		return -ENODEV;
+	}
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0)
+		return data->irq;
+
+	data->clk = devm_clk_get(&pdev->dev, "snvs-rtc");
+	if (IS_ERR(data->clk)) {
+		data->clk = NULL;
+	} else {
+		ret = clk_prepare_enable(data->clk);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Could not prepare or enable the snvs clock\n");
+			return ret;
+		}
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	/* Initialize glitch detect */
+	regmap_write(data->regmap, data->offset + SNVS_LPPGDR, SNVS_LPPGDR_INIT);
+
+	/* Clear interrupt status */
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff);
+
+	/* Enable RTC */
+	ret = snvs_rtc_enable(data, true);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable rtc %d\n", ret);
+		goto error_rtc_device_register;
+	}
+
+	device_init_wakeup(&pdev->dev, true);
+
+	ret = devm_request_irq(&pdev->dev, data->irq, snvs_rtc_irq_handler,
+			       IRQF_SHARED, "rtc alarm", &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq %d: %d\n",
+			data->irq, ret);
+		goto error_rtc_device_register;
+	}
+
+	data->rtc->ops = &snvs_rtc_ops;
+	ret = rtc_register_device(data->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register rtc: %d\n", ret);
+		goto error_rtc_device_register;
+	}
+
+	return 0;
+
+error_rtc_device_register:
+	if (data->clk)
+		clk_disable_unprepare(data->clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int snvs_rtc_suspend(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(data->irq);
+
+	return 0;
+}
+
+static int snvs_rtc_suspend_noirq(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	if (data->clk)
+		clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int snvs_rtc_resume(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(data->irq);
+
+	return 0;
+}
+
+static int snvs_rtc_resume_noirq(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	if (data->clk)
+		return clk_prepare_enable(data->clk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops snvs_rtc_pm_ops = {
+	.suspend = snvs_rtc_suspend,
+	.suspend_noirq = snvs_rtc_suspend_noirq,
+	.resume = snvs_rtc_resume,
+	.resume_noirq = snvs_rtc_resume_noirq,
+};
+
+#define SNVS_RTC_PM_OPS	(&snvs_rtc_pm_ops)
+
+#else
+
+#define SNVS_RTC_PM_OPS	NULL
+
+#endif
+
+static const struct of_device_id snvs_dt_ids[] = {
+	{ .compatible = "fsl,sec-v4.0-mon-rtc-lp", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, snvs_dt_ids);
+
+static struct platform_driver snvs_rtc_driver = {
+	.driver = {
+		.name	= "snvs_rtc",
+		.pm	= SNVS_RTC_PM_OPS,
+		.of_match_table = snvs_dt_ids,
+	},
+	.probe		= snvs_rtc_probe,
+};
+module_platform_driver(snvs_rtc_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Freescale SNVS RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-spear.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-spear.c
new file mode 100644
index 0000000..e377f42
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-spear.c
@@ -0,0 +1,504 @@
+/*
+ * drivers/rtc/rtc-spear.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/* RTC registers */
+#define TIME_REG		0x00
+#define DATE_REG		0x04
+#define ALARM_TIME_REG		0x08
+#define ALARM_DATE_REG		0x0C
+#define CTRL_REG		0x10
+#define STATUS_REG		0x14
+
+/* TIME_REG & ALARM_TIME_REG */
+#define SECONDS_UNITS		(0xf<<0)	/* seconds units position */
+#define SECONDS_TENS		(0x7<<4)	/* seconds tens position */
+#define MINUTES_UNITS		(0xf<<8)	/* minutes units position */
+#define MINUTES_TENS		(0x7<<12)	/* minutes tens position */
+#define HOURS_UNITS		(0xf<<16)	/* hours units position */
+#define HOURS_TENS		(0x3<<20)	/* hours tens position */
+
+/* DATE_REG & ALARM_DATE_REG */
+#define DAYS_UNITS		(0xf<<0)	/* days units position */
+#define DAYS_TENS		(0x3<<4)	/* days tens position */
+#define MONTHS_UNITS		(0xf<<8)	/* months units position */
+#define MONTHS_TENS		(0x1<<12)	/* months tens position */
+#define YEARS_UNITS		(0xf<<16)	/* years units position */
+#define YEARS_TENS		(0xf<<20)	/* years tens position */
+#define YEARS_HUNDREDS		(0xf<<24)	/* years hundereds position */
+#define YEARS_MILLENIUMS	(0xf<<28)	/* years millenium position */
+
+/* MASK SHIFT TIME_REG & ALARM_TIME_REG*/
+#define SECOND_SHIFT		0x00		/* seconds units */
+#define MINUTE_SHIFT		0x08		/* minutes units position */
+#define HOUR_SHIFT		0x10		/* hours units position */
+#define MDAY_SHIFT		0x00		/* Month day shift */
+#define MONTH_SHIFT		0x08		/* Month shift */
+#define YEAR_SHIFT		0x10		/* Year shift */
+
+#define SECOND_MASK		0x7F
+#define MIN_MASK		0x7F
+#define HOUR_MASK		0x3F
+#define DAY_MASK		0x3F
+#define MONTH_MASK		0x7F
+#define YEAR_MASK		0xFFFF
+
+/* date reg equal to time reg, for debug only */
+#define TIME_BYP		(1<<9)
+#define INT_ENABLE		(1<<31)		/* interrupt enable */
+
+/* STATUS_REG */
+#define CLK_UNCONNECTED		(1<<0)
+#define PEND_WR_TIME		(1<<2)
+#define PEND_WR_DATE		(1<<3)
+#define LOST_WR_TIME		(1<<4)
+#define LOST_WR_DATE		(1<<5)
+#define RTC_INT_MASK		(1<<31)
+#define STATUS_BUSY		(PEND_WR_TIME | PEND_WR_DATE)
+#define STATUS_FAIL		(LOST_WR_TIME | LOST_WR_DATE)
+
+struct spear_rtc_config {
+	struct rtc_device *rtc;
+	struct clk *clk;
+	spinlock_t lock;
+	void __iomem *ioaddr;
+	unsigned int irq_wake;
+};
+
+static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config)
+{
+	unsigned int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&config->lock, flags);
+	val = readl(config->ioaddr + STATUS_REG);
+	val |= RTC_INT_MASK;
+	writel(val, config->ioaddr + STATUS_REG);
+	spin_unlock_irqrestore(&config->lock, flags);
+}
+
+static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config)
+{
+	unsigned int val;
+
+	val = readl(config->ioaddr + CTRL_REG);
+	if (!(val & INT_ENABLE)) {
+		spear_rtc_clear_interrupt(config);
+		val |= INT_ENABLE;
+		writel(val, config->ioaddr + CTRL_REG);
+	}
+}
+
+static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config)
+{
+	unsigned int val;
+
+	val = readl(config->ioaddr + CTRL_REG);
+	if (val & INT_ENABLE) {
+		val &= ~INT_ENABLE;
+		writel(val, config->ioaddr + CTRL_REG);
+	}
+}
+
+static inline int is_write_complete(struct spear_rtc_config *config)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&config->lock, flags);
+	if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL)
+		ret = -EIO;
+	spin_unlock_irqrestore(&config->lock, flags);
+
+	return ret;
+}
+
+static void rtc_wait_not_busy(struct spear_rtc_config *config)
+{
+	int status, count = 0;
+	unsigned long flags;
+
+	/* Assuming BUSY may stay active for 80 msec) */
+	for (count = 0; count < 80; count++) {
+		spin_lock_irqsave(&config->lock, flags);
+		status = readl(config->ioaddr + STATUS_REG);
+		spin_unlock_irqrestore(&config->lock, flags);
+		if ((status & STATUS_BUSY) == 0)
+			break;
+		/* check status busy, after each msec */
+		msleep(1);
+	}
+}
+
+static irqreturn_t spear_rtc_irq(int irq, void *dev_id)
+{
+	struct spear_rtc_config *config = dev_id;
+	unsigned long flags, events = 0;
+	unsigned int irq_data;
+
+	spin_lock_irqsave(&config->lock, flags);
+	irq_data = readl(config->ioaddr + STATUS_REG);
+	spin_unlock_irqrestore(&config->lock, flags);
+
+	if ((irq_data & RTC_INT_MASK)) {
+		spear_rtc_clear_interrupt(config);
+		events = RTC_IRQF | RTC_AF;
+		rtc_update_irq(config->rtc, 1, events);
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+
+}
+
+static int tm2bcd(struct rtc_time *tm)
+{
+	if (rtc_valid_tm(tm) != 0)
+		return -EINVAL;
+	tm->tm_sec = bin2bcd(tm->tm_sec);
+	tm->tm_min = bin2bcd(tm->tm_min);
+	tm->tm_hour = bin2bcd(tm->tm_hour);
+	tm->tm_mday = bin2bcd(tm->tm_mday);
+	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
+	tm->tm_year = bin2bcd(tm->tm_year);
+
+	return 0;
+}
+
+static void bcd2tm(struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
+	/* epoch == 1900 */
+	tm->tm_year = bcd2bin(tm->tm_year);
+}
+
+/*
+ * spear_rtc_read_time - set the time
+ * @dev: rtc device in use
+ * @tm: holds date and time
+ *
+ * This function read time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spear_rtc_config *config = dev_get_drvdata(dev);
+	unsigned int time, date;
+
+	/* we don't report wday/yday/isdst ... */
+	rtc_wait_not_busy(config);
+
+	time = readl(config->ioaddr + TIME_REG);
+	date = readl(config->ioaddr + DATE_REG);
+	tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
+	tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
+	tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
+	tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
+	tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
+	tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
+
+	bcd2tm(tm);
+	return 0;
+}
+
+/*
+ * spear_rtc_set_time - set the time
+ * @dev: rtc device in use
+ * @tm: holds date and time
+ *
+ * This function set time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spear_rtc_config *config = dev_get_drvdata(dev);
+	unsigned int time, date;
+
+	if (tm2bcd(tm) < 0)
+		return -EINVAL;
+
+	rtc_wait_not_busy(config);
+	time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) |
+		(tm->tm_hour << HOUR_SHIFT);
+	date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) |
+		(tm->tm_year << YEAR_SHIFT);
+	writel(time, config->ioaddr + TIME_REG);
+	writel(date, config->ioaddr + DATE_REG);
+
+	return is_write_complete(config);
+}
+
+/*
+ * spear_rtc_read_alarm - read the alarm time
+ * @dev: rtc device in use
+ * @alm: holds alarm date and time
+ *
+ * This function read alarm time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct spear_rtc_config *config = dev_get_drvdata(dev);
+	unsigned int time, date;
+
+	rtc_wait_not_busy(config);
+
+	time = readl(config->ioaddr + ALARM_TIME_REG);
+	date = readl(config->ioaddr + ALARM_DATE_REG);
+	alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
+	alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
+	alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
+	alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
+	alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
+	alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
+
+	bcd2tm(&alm->time);
+	alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE;
+
+	return 0;
+}
+
+/*
+ * spear_rtc_set_alarm - set the alarm time
+ * @dev: rtc device in use
+ * @alm: holds alarm date and time
+ *
+ * This function set alarm time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct spear_rtc_config *config = dev_get_drvdata(dev);
+	unsigned int time, date;
+	int err;
+
+	if (tm2bcd(&alm->time) < 0)
+		return -EINVAL;
+
+	rtc_wait_not_busy(config);
+
+	time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min <<
+			MINUTE_SHIFT) |	(alm->time.tm_hour << HOUR_SHIFT);
+	date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon <<
+			MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT);
+
+	writel(time, config->ioaddr + ALARM_TIME_REG);
+	writel(date, config->ioaddr + ALARM_DATE_REG);
+	err = is_write_complete(config);
+	if (err < 0)
+		return err;
+
+	if (alm->enabled)
+		spear_rtc_enable_interrupt(config);
+	else
+		spear_rtc_disable_interrupt(config);
+
+	return 0;
+}
+
+static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct spear_rtc_config *config = dev_get_drvdata(dev);
+	int ret = 0;
+
+	spear_rtc_clear_interrupt(config);
+
+	switch (enabled) {
+	case 0:
+		/* alarm off */
+		spear_rtc_disable_interrupt(config);
+		break;
+	case 1:
+		/* alarm on */
+		spear_rtc_enable_interrupt(config);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops spear_rtc_ops = {
+	.read_time = spear_rtc_read_time,
+	.set_time = spear_rtc_set_time,
+	.read_alarm = spear_rtc_read_alarm,
+	.set_alarm = spear_rtc_set_alarm,
+	.alarm_irq_enable = spear_alarm_irq_enable,
+};
+
+static int spear_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct spear_rtc_config *config;
+	int status = 0;
+	int irq;
+
+	config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+	if (!config)
+		return -ENOMEM;
+
+	/* alarm irqs */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no update irq?\n");
+		return irq;
+	}
+
+	status = devm_request_irq(&pdev->dev, irq, spear_rtc_irq, 0, pdev->name,
+			config);
+	if (status) {
+		dev_err(&pdev->dev, "Alarm interrupt IRQ%d already claimed\n",
+				irq);
+		return status;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	config->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(config->ioaddr))
+		return PTR_ERR(config->ioaddr);
+
+	config->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(config->clk))
+		return PTR_ERR(config->clk);
+
+	status = clk_prepare_enable(config->clk);
+	if (status < 0)
+		return status;
+
+	spin_lock_init(&config->lock);
+	platform_set_drvdata(pdev, config);
+
+	config->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&spear_rtc_ops, THIS_MODULE);
+	if (IS_ERR(config->rtc)) {
+		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+				PTR_ERR(config->rtc));
+		status = PTR_ERR(config->rtc);
+		goto err_disable_clock;
+	}
+
+	config->rtc->uie_unsupported = 1;
+
+	if (!device_can_wakeup(&pdev->dev))
+		device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+err_disable_clock:
+	clk_disable_unprepare(config->clk);
+
+	return status;
+}
+
+static int spear_rtc_remove(struct platform_device *pdev)
+{
+	struct spear_rtc_config *config = platform_get_drvdata(pdev);
+
+	spear_rtc_disable_interrupt(config);
+	clk_disable_unprepare(config->clk);
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int spear_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_rtc_config *config = platform_get_drvdata(pdev);
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (device_may_wakeup(&pdev->dev)) {
+		if (!enable_irq_wake(irq))
+			config->irq_wake = 1;
+	} else {
+		spear_rtc_disable_interrupt(config);
+		clk_disable(config->clk);
+	}
+
+	return 0;
+}
+
+static int spear_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_rtc_config *config = platform_get_drvdata(pdev);
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (config->irq_wake) {
+			disable_irq_wake(irq);
+			config->irq_wake = 0;
+		}
+	} else {
+		clk_enable(config->clk);
+		spear_rtc_enable_interrupt(config);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(spear_rtc_pm_ops, spear_rtc_suspend, spear_rtc_resume);
+
+static void spear_rtc_shutdown(struct platform_device *pdev)
+{
+	struct spear_rtc_config *config = platform_get_drvdata(pdev);
+
+	spear_rtc_disable_interrupt(config);
+	clk_disable(config->clk);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_rtc_id_table[] = {
+	{ .compatible = "st,spear600-rtc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
+#endif
+
+static struct platform_driver spear_rtc_driver = {
+	.probe = spear_rtc_probe,
+	.remove = spear_rtc_remove,
+	.shutdown = spear_rtc_shutdown,
+	.driver = {
+		.name = "rtc-spear",
+		.pm = &spear_rtc_pm_ops,
+		.of_match_table = of_match_ptr(spear_rtc_id_table),
+	},
+};
+
+module_platform_driver(spear_rtc_driver);
+
+MODULE_ALIAS("platform:rtc-spear");
+MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>");
+MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-st-lpc.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-st-lpc.c
new file mode 100644
index 0000000..82b0af1
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-st-lpc.c
@@ -0,0 +1,351 @@
+/*
+ * rtc-st-lpc.c - ST's LPC RTC, powered by the Low Power Timer
+ *
+ * Copyright (C) 2014 STMicroelectronics Limited
+ *
+ * Author: David Paris <david.paris@st.com> for STMicroelectronics
+ *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ *
+ * Based on the original driver written by Stuart Menefy.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Timer */
+#define LPC_LPT_LSB_OFF		0x400
+#define LPC_LPT_MSB_OFF		0x404
+#define LPC_LPT_START_OFF	0x408
+
+/* Low Power Alarm */
+#define LPC_LPA_LSB_OFF		0x410
+#define LPC_LPA_MSB_OFF		0x414
+#define LPC_LPA_START_OFF	0x418
+
+/* LPC as WDT */
+#define LPC_WDT_OFF		0x510
+#define LPC_WDT_FLAG_OFF	0x514
+
+struct st_rtc {
+	struct rtc_device *rtc_dev;
+	struct rtc_wkalrm alarm;
+	struct resource *res;
+	struct clk *clk;
+	unsigned long clkrate;
+	void __iomem *ioaddr;
+	bool irq_enabled:1;
+	spinlock_t lock;
+	short irq;
+};
+
+static void st_rtc_set_hw_alarm(struct st_rtc *rtc,
+				unsigned long msb, unsigned long  lsb)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel_relaxed(1, rtc->ioaddr + LPC_WDT_OFF);
+
+	writel_relaxed(msb, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel_relaxed(lsb, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel_relaxed(1, rtc->ioaddr + LPC_LPA_START_OFF);
+
+	writel_relaxed(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+}
+
+static irqreturn_t st_rtc_handler(int this_irq, void *data)
+{
+	struct st_rtc *rtc = (struct st_rtc *)data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int st_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long lpt_lsb, lpt_msb;
+	unsigned long long lpt;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	do {
+		lpt_msb = readl_relaxed(rtc->ioaddr + LPC_LPT_MSB_OFF);
+		lpt_lsb = readl_relaxed(rtc->ioaddr + LPC_LPT_LSB_OFF);
+	} while (readl_relaxed(rtc->ioaddr + LPC_LPT_MSB_OFF) != lpt_msb);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	lpt = ((unsigned long long)lpt_msb << 32) | lpt_lsb;
+	do_div(lpt, rtc->clkrate);
+	rtc_time64_to_tm(lpt, tm);
+
+	return 0;
+}
+
+static int st_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long long lpt, secs;
+	unsigned long flags;
+
+	secs = rtc_tm_to_time64(tm);
+
+	lpt = (unsigned long long)secs * rtc->clkrate;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel_relaxed(lpt >> 32, rtc->ioaddr + LPC_LPT_MSB_OFF);
+	writel_relaxed(lpt, rtc->ioaddr + LPC_LPT_LSB_OFF);
+	writel_relaxed(1, rtc->ioaddr + LPC_LPT_START_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	memcpy(wkalrm, &rtc->alarm, sizeof(struct rtc_wkalrm));
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled && !rtc->irq_enabled) {
+		enable_irq(rtc->irq);
+		rtc->irq_enabled = true;
+	} else if (!enabled && rtc->irq_enabled) {
+		disable_irq(rtc->irq);
+		rtc->irq_enabled = false;
+	}
+
+	return 0;
+}
+
+static int st_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time now;
+	unsigned long long now_secs;
+	unsigned long long alarm_secs;
+	unsigned long long lpa;
+
+	st_rtc_read_time(dev, &now);
+	now_secs = rtc_tm_to_time64(&now);
+	alarm_secs = rtc_tm_to_time64(&t->time);
+
+	/* Invalid alarm time */
+	if (now_secs > alarm_secs)
+		return -EINVAL;
+
+	memcpy(&rtc->alarm, t, sizeof(struct rtc_wkalrm));
+
+	/* Now many secs to fire */
+	alarm_secs -= now_secs;
+	lpa = (unsigned long long)alarm_secs * rtc->clkrate;
+
+	st_rtc_set_hw_alarm(rtc, lpa >> 32, lpa);
+	st_rtc_alarm_irq_enable(dev, t->enabled);
+
+	return 0;
+}
+
+static struct rtc_class_ops st_rtc_ops = {
+	.read_time		= st_rtc_read_time,
+	.set_time		= st_rtc_set_time,
+	.read_alarm		= st_rtc_read_alarm,
+	.set_alarm		= st_rtc_set_alarm,
+	.alarm_irq_enable	= st_rtc_alarm_irq_enable,
+};
+
+static int st_rtc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_rtc *rtc;
+	struct resource *res;
+	struct rtc_time tm_check;
+	uint32_t mode;
+	int ret = 0;
+
+	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+	if (ret) {
+		dev_err(&pdev->dev, "An LPC mode must be provided\n");
+		return -EINVAL;
+	}
+
+	/* LPC can either run as a Clocksource or in RTC or WDT mode */
+	if (mode != ST_LPC_MODE_RTC)
+		return -ENODEV;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct st_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->ioaddr))
+		return PTR_ERR(rtc->ioaddr);
+
+	rtc->irq = irq_of_parse_and_map(np, 0);
+	if (!rtc->irq) {
+		dev_err(&pdev->dev, "IRQ missing or invalid\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler, 0,
+			       pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", rtc->irq);
+		return ret;
+	}
+
+	enable_irq_wake(rtc->irq);
+	disable_irq(rtc->irq);
+
+	rtc->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtc->clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(rtc->clk);
+	}
+
+	clk_prepare_enable(rtc->clk);
+
+	rtc->clkrate = clk_get_rate(rtc->clk);
+	if (!rtc->clkrate) {
+		dev_err(&pdev->dev, "Unable to fetch clock rate\n");
+		return -EINVAL;
+	}
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+
+	/*
+	 * The RTC-LPC is able to manage date.year > 2038
+	 * but currently the kernel can not manage this date!
+	 * If the RTC-LPC has a date.year > 2038 then
+	 * it's set to the epoch "Jan 1st 2000"
+	 */
+	st_rtc_read_time(&pdev->dev, &tm_check);
+
+	if (tm_check.tm_year >=  (2038 - 1900)) {
+		memset(&tm_check, 0, sizeof(tm_check));
+		tm_check.tm_year = 100;
+		tm_check.tm_mday = 1;
+		st_rtc_set_time(&pdev->dev, &tm_check);
+	}
+
+	rtc->rtc_dev = rtc_device_register("st-lpc-rtc", &pdev->dev,
+					   &st_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		clk_disable_unprepare(rtc->clk);
+		return PTR_ERR(rtc->rtc_dev);
+	}
+
+	return 0;
+}
+
+static int st_rtc_remove(struct platform_device *pdev)
+{
+	struct st_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (likely(rtc->rtc_dev))
+		rtc_device_unregister(rtc->rtc_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_rtc_suspend(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	writel_relaxed(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel_relaxed(0, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel_relaxed(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+
+static int st_rtc_resume(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_alarm_irq_enable(rtc->rtc_dev, 0);
+
+	/*
+	 * clean 'rtc->alarm' to allow a new
+	 * .set_alarm to the upper RTC layer
+	 */
+	memset(&rtc->alarm, 0, sizeof(struct rtc_wkalrm));
+
+	writel_relaxed(0, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel_relaxed(0, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel_relaxed(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel_relaxed(1, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel_relaxed(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_rtc_pm_ops, st_rtc_suspend, st_rtc_resume);
+
+static const struct of_device_id st_rtc_match[] = {
+	{ .compatible = "st,stih407-lpc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_rtc_match);
+
+static struct platform_driver st_rtc_platform_driver = {
+	.driver = {
+		.name = "st-lpc-rtc",
+		.pm = &st_rtc_pm_ops,
+		.of_match_table = st_rtc_match,
+	},
+	.probe = st_rtc_probe,
+	.remove = st_rtc_remove,
+};
+
+module_platform_driver(st_rtc_platform_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics LPC RTC driver");
+MODULE_AUTHOR("David Paris <david.paris@st.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-starfire.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-starfire.c
new file mode 100644
index 0000000..7fc3697
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-starfire.c
@@ -0,0 +1,58 @@
+/* rtc-starfire.c: Starfire platform RTC driver.
+ *
+ * Author: David S. Miller
+ * License: GPL
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/oplib.h>
+
+static u32 starfire_get_time(void)
+{
+	static char obp_gettod[32];
+	static u32 unix_tod;
+
+	sprintf(obp_gettod, "h# %08x unix-gettod",
+		(unsigned int) (long) &unix_tod);
+	prom_feval(obp_gettod);
+
+	return unix_tod;
+}
+
+static int starfire_read_time(struct device *dev, struct rtc_time *tm)
+{
+	rtc_time_to_tm(starfire_get_time(), tm);
+	return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops starfire_rtc_ops = {
+	.read_time	= starfire_read_time,
+};
+
+static int __init starfire_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+
+	rtc = devm_rtc_device_register(&pdev->dev, "starfire",
+				&starfire_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver starfire_rtc_driver = {
+	.driver		= {
+		.name	= "rtc-starfire",
+	},
+};
+
+builtin_platform_driver_probe(starfire_rtc_driver, starfire_rtc_probe);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-stk17ta8.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-stk17ta8.c
new file mode 100644
index 0000000..a456cb6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-stk17ta8.c
@@ -0,0 +1,366 @@
+/*
+ * A RTC driver for the Simtek STK17TA8
+ *
+ * By Thomas Hommel <thomas.hommel@ge.com>
+ *
+ * Based on the DS1553 driver from
+ * Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#define RTC_REG_SIZE		0x20000
+#define RTC_OFFSET		0x1fff0
+
+#define RTC_FLAGS		(RTC_OFFSET + 0)
+#define RTC_CENTURY		(RTC_OFFSET + 1)
+#define RTC_SECONDS_ALARM	(RTC_OFFSET + 2)
+#define RTC_MINUTES_ALARM	(RTC_OFFSET + 3)
+#define RTC_HOURS_ALARM		(RTC_OFFSET + 4)
+#define RTC_DATE_ALARM		(RTC_OFFSET + 5)
+#define RTC_INTERRUPTS		(RTC_OFFSET + 6)
+#define RTC_WATCHDOG		(RTC_OFFSET + 7)
+#define RTC_CALIBRATION		(RTC_OFFSET + 8)
+#define RTC_SECONDS		(RTC_OFFSET + 9)
+#define RTC_MINUTES		(RTC_OFFSET + 10)
+#define RTC_HOURS		(RTC_OFFSET + 11)
+#define RTC_DAY			(RTC_OFFSET + 12)
+#define RTC_DATE		(RTC_OFFSET + 13)
+#define RTC_MONTH		(RTC_OFFSET + 14)
+#define RTC_YEAR		(RTC_OFFSET + 15)
+
+#define RTC_SECONDS_MASK	0x7f
+#define RTC_DAY_MASK		0x07
+#define RTC_CAL_MASK		0x3f
+
+/* Bits in the Calibration register */
+#define RTC_STOP		0x80
+
+/* Bits in the Flags register */
+#define RTC_FLAGS_AF		0x40
+#define RTC_FLAGS_PF		0x20
+#define RTC_WRITE		0x02
+#define RTC_READ		0x01
+
+/* Bits in the Interrupts register */
+#define RTC_INTS_AIE		0x40
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	unsigned long last_jiffies;
+	int irq;
+	unsigned int irqen;
+	int alrm_sec;
+	int alrm_min;
+	int alrm_hour;
+	int alrm_mday;
+	spinlock_t lock;
+};
+
+static int stk17ta8_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u8 flags;
+
+	flags = readb(pdata->ioaddr + RTC_FLAGS);
+	writeb(flags | RTC_WRITE, pdata->ioaddr + RTC_FLAGS);
+
+	writeb(bin2bcd(tm->tm_year % 100), ioaddr + RTC_YEAR);
+	writeb(bin2bcd(tm->tm_mon + 1), ioaddr + RTC_MONTH);
+	writeb(bin2bcd(tm->tm_wday) & RTC_DAY_MASK, ioaddr + RTC_DAY);
+	writeb(bin2bcd(tm->tm_mday), ioaddr + RTC_DATE);
+	writeb(bin2bcd(tm->tm_hour), ioaddr + RTC_HOURS);
+	writeb(bin2bcd(tm->tm_min), ioaddr + RTC_MINUTES);
+	writeb(bin2bcd(tm->tm_sec) & RTC_SECONDS_MASK, ioaddr + RTC_SECONDS);
+	writeb(bin2bcd((tm->tm_year + 1900) / 100), ioaddr + RTC_CENTURY);
+
+	writeb(flags & ~RTC_WRITE, pdata->ioaddr + RTC_FLAGS);
+	return 0;
+}
+
+static int stk17ta8_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned int year, month, day, hour, minute, second, week;
+	unsigned int century;
+	u8 flags;
+
+	/* give enough time to update RTC in case of continuous read */
+	if (pdata->last_jiffies == jiffies)
+		msleep(1);
+	pdata->last_jiffies = jiffies;
+
+	flags = readb(pdata->ioaddr + RTC_FLAGS);
+	writeb(flags | RTC_READ, ioaddr + RTC_FLAGS);
+	second = readb(ioaddr + RTC_SECONDS) & RTC_SECONDS_MASK;
+	minute = readb(ioaddr + RTC_MINUTES);
+	hour = readb(ioaddr + RTC_HOURS);
+	day = readb(ioaddr + RTC_DATE);
+	week = readb(ioaddr + RTC_DAY) & RTC_DAY_MASK;
+	month = readb(ioaddr + RTC_MONTH);
+	year = readb(ioaddr + RTC_YEAR);
+	century = readb(ioaddr + RTC_CENTURY);
+	writeb(flags & ~RTC_READ, ioaddr + RTC_FLAGS);
+	tm->tm_sec = bcd2bin(second);
+	tm->tm_min = bcd2bin(minute);
+	tm->tm_hour = bcd2bin(hour);
+	tm->tm_mday = bcd2bin(day);
+	tm->tm_wday = bcd2bin(week);
+	tm->tm_mon = bcd2bin(month) - 1;
+	/* year is 1900 + tm->tm_year */
+	tm->tm_year = bcd2bin(year) + bcd2bin(century) * 100 - 1900;
+
+	if (rtc_valid_tm(tm) < 0) {
+		dev_err(dev, "retrieved date/time is not valid.\n");
+		rtc_time_to_tm(0, tm);
+	}
+	return 0;
+}
+
+static void stk17ta8_rtc_update_alarm(struct rtc_plat_data *pdata)
+{
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned long irqflags;
+	u8 flags;
+
+	spin_lock_irqsave(&pdata->lock, irqflags);
+
+	flags = readb(ioaddr + RTC_FLAGS);
+	writeb(flags | RTC_WRITE, ioaddr + RTC_FLAGS);
+
+	writeb(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_mday),
+	       ioaddr + RTC_DATE_ALARM);
+	writeb(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_hour),
+	       ioaddr + RTC_HOURS_ALARM);
+	writeb(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_min),
+	       ioaddr + RTC_MINUTES_ALARM);
+	writeb(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ?
+	       0x80 : bin2bcd(pdata->alrm_sec),
+	       ioaddr + RTC_SECONDS_ALARM);
+	writeb(pdata->irqen ? RTC_INTS_AIE : 0, ioaddr + RTC_INTERRUPTS);
+	readb(ioaddr + RTC_FLAGS);	/* clear interrupts */
+	writeb(flags & ~RTC_WRITE, ioaddr + RTC_FLAGS);
+	spin_unlock_irqrestore(&pdata->lock, irqflags);
+}
+
+static int stk17ta8_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	pdata->alrm_mday = alrm->time.tm_mday;
+	pdata->alrm_hour = alrm->time.tm_hour;
+	pdata->alrm_min = alrm->time.tm_min;
+	pdata->alrm_sec = alrm->time.tm_sec;
+	if (alrm->enabled)
+		pdata->irqen |= RTC_AF;
+	stk17ta8_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static int stk17ta8_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
+	alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
+	alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
+	alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec;
+	alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0;
+	return 0;
+}
+
+static irqreturn_t stk17ta8_rtc_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	unsigned long events = 0;
+
+	spin_lock(&pdata->lock);
+	/* read and clear interrupt */
+	if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_AF) {
+		events = RTC_IRQF;
+		if (readb(ioaddr + RTC_SECONDS_ALARM) & 0x80)
+			events |= RTC_UF;
+		else
+			events |= RTC_AF;
+		rtc_update_irq(pdata->rtc, 1, events);
+	}
+	spin_unlock(&pdata->lock);
+	return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int stk17ta8_rtc_alarm_irq_enable(struct device *dev,
+	unsigned int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	if (pdata->irq <= 0)
+		return -EINVAL;
+	if (enabled)
+		pdata->irqen |= RTC_AF;
+	else
+		pdata->irqen &= ~RTC_AF;
+	stk17ta8_rtc_update_alarm(pdata);
+	return 0;
+}
+
+static const struct rtc_class_ops stk17ta8_rtc_ops = {
+	.read_time		= stk17ta8_rtc_read_time,
+	.set_time		= stk17ta8_rtc_set_time,
+	.read_alarm		= stk17ta8_rtc_read_alarm,
+	.set_alarm		= stk17ta8_rtc_set_alarm,
+	.alarm_irq_enable	= stk17ta8_rtc_alarm_irq_enable,
+};
+
+static ssize_t stk17ta8_nvram_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *attr, char *buf,
+				 loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		*buf++ = readb(ioaddr + pos++);
+	return count;
+}
+
+static ssize_t stk17ta8_nvram_write(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *attr, char *buf,
+				  loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	ssize_t count;
+
+	for (count = 0; count < size; count++)
+		writeb(*buf++, ioaddr + pos++);
+	return count;
+}
+
+static struct bin_attribute stk17ta8_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = RTC_OFFSET,
+	.read = stk17ta8_nvram_read,
+	.write = stk17ta8_nvram_write,
+};
+
+static int stk17ta8_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	unsigned int cal;
+	unsigned int flags;
+	struct rtc_plat_data *pdata;
+	void __iomem *ioaddr;
+	int ret = 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ioaddr))
+		return PTR_ERR(ioaddr);
+	pdata->ioaddr = ioaddr;
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	/* turn RTC on if it was not on */
+	cal = readb(ioaddr + RTC_CALIBRATION);
+	if (cal & RTC_STOP) {
+		cal &= RTC_CAL_MASK;
+		flags = readb(ioaddr + RTC_FLAGS);
+		writeb(flags | RTC_WRITE, ioaddr + RTC_FLAGS);
+		writeb(cal, ioaddr + RTC_CALIBRATION);
+		writeb(flags & ~RTC_WRITE, ioaddr + RTC_FLAGS);
+	}
+	if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_PF)
+		dev_warn(&pdev->dev, "voltage-low detected.\n");
+
+	spin_lock_init(&pdata->lock);
+	pdata->last_jiffies = jiffies;
+	platform_set_drvdata(pdev, pdata);
+	if (pdata->irq > 0) {
+		writeb(0, ioaddr + RTC_INTERRUPTS);
+		if (devm_request_irq(&pdev->dev, pdata->irq,
+				stk17ta8_rtc_interrupt,
+				IRQF_SHARED,
+				pdev->name, pdev) < 0) {
+			dev_warn(&pdev->dev, "interrupt not available.\n");
+			pdata->irq = 0;
+		}
+	}
+
+	pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				  &stk17ta8_rtc_ops, THIS_MODULE);
+	if (IS_ERR(pdata->rtc))
+		return PTR_ERR(pdata->rtc);
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &stk17ta8_nvram_attr);
+
+	return ret;
+}
+
+static int stk17ta8_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	sysfs_remove_bin_file(&pdev->dev.kobj, &stk17ta8_nvram_attr);
+	if (pdata->irq > 0)
+		writeb(0, pdata->ioaddr + RTC_INTERRUPTS);
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:stk17ta8");
+
+static struct platform_driver stk17ta8_rtc_driver = {
+	.probe		= stk17ta8_rtc_probe,
+	.remove		= stk17ta8_rtc_remove,
+	.driver		= {
+		.name	= "stk17ta8",
+	},
+};
+
+module_platform_driver(stk17ta8_rtc_driver);
+
+MODULE_AUTHOR("Thomas Hommel <thomas.hommel@ge.com>");
+MODULE_DESCRIPTION("Simtek STK17TA8 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-stm32.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-stm32.c
new file mode 100644
index 0000000..3a5c3d7
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-stm32.c
@@ -0,0 +1,773 @@
+/*
+ * Copyright (C) Amelie Delaunay 2016
+ * Author:  Amelie Delaunay <amelie.delaunay@st.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define DRIVER_NAME "stm32_rtc"
+
+/* STM32 RTC registers */
+#define STM32_RTC_TR		0x00
+#define STM32_RTC_DR		0x04
+#define STM32_RTC_CR		0x08
+#define STM32_RTC_ISR		0x0C
+#define STM32_RTC_PRER		0x10
+#define STM32_RTC_ALRMAR	0x1C
+#define STM32_RTC_WPR		0x24
+
+/* STM32_RTC_TR bit fields  */
+#define STM32_RTC_TR_SEC_SHIFT		0
+#define STM32_RTC_TR_SEC		GENMASK(6, 0)
+#define STM32_RTC_TR_MIN_SHIFT		8
+#define STM32_RTC_TR_MIN		GENMASK(14, 8)
+#define STM32_RTC_TR_HOUR_SHIFT		16
+#define STM32_RTC_TR_HOUR		GENMASK(21, 16)
+
+/* STM32_RTC_DR bit fields */
+#define STM32_RTC_DR_DATE_SHIFT		0
+#define STM32_RTC_DR_DATE		GENMASK(5, 0)
+#define STM32_RTC_DR_MONTH_SHIFT	8
+#define STM32_RTC_DR_MONTH		GENMASK(12, 8)
+#define STM32_RTC_DR_WDAY_SHIFT		13
+#define STM32_RTC_DR_WDAY		GENMASK(15, 13)
+#define STM32_RTC_DR_YEAR_SHIFT		16
+#define STM32_RTC_DR_YEAR		GENMASK(23, 16)
+
+/* STM32_RTC_CR bit fields */
+#define STM32_RTC_CR_FMT		BIT(6)
+#define STM32_RTC_CR_ALRAE		BIT(8)
+#define STM32_RTC_CR_ALRAIE		BIT(12)
+
+/* STM32_RTC_ISR bit fields */
+#define STM32_RTC_ISR_ALRAWF		BIT(0)
+#define STM32_RTC_ISR_INITS		BIT(4)
+#define STM32_RTC_ISR_RSF		BIT(5)
+#define STM32_RTC_ISR_INITF		BIT(6)
+#define STM32_RTC_ISR_INIT		BIT(7)
+#define STM32_RTC_ISR_ALRAF		BIT(8)
+
+/* STM32_RTC_PRER bit fields */
+#define STM32_RTC_PRER_PRED_S_SHIFT	0
+#define STM32_RTC_PRER_PRED_S		GENMASK(14, 0)
+#define STM32_RTC_PRER_PRED_A_SHIFT	16
+#define STM32_RTC_PRER_PRED_A		GENMASK(22, 16)
+
+/* STM32_RTC_ALRMAR and STM32_RTC_ALRMBR bit fields */
+#define STM32_RTC_ALRMXR_SEC_SHIFT	0
+#define STM32_RTC_ALRMXR_SEC		GENMASK(6, 0)
+#define STM32_RTC_ALRMXR_SEC_MASK	BIT(7)
+#define STM32_RTC_ALRMXR_MIN_SHIFT	8
+#define STM32_RTC_ALRMXR_MIN		GENMASK(14, 8)
+#define STM32_RTC_ALRMXR_MIN_MASK	BIT(15)
+#define STM32_RTC_ALRMXR_HOUR_SHIFT	16
+#define STM32_RTC_ALRMXR_HOUR		GENMASK(21, 16)
+#define STM32_RTC_ALRMXR_PM		BIT(22)
+#define STM32_RTC_ALRMXR_HOUR_MASK	BIT(23)
+#define STM32_RTC_ALRMXR_DATE_SHIFT	24
+#define STM32_RTC_ALRMXR_DATE		GENMASK(29, 24)
+#define STM32_RTC_ALRMXR_WDSEL		BIT(30)
+#define STM32_RTC_ALRMXR_WDAY_SHIFT	24
+#define STM32_RTC_ALRMXR_WDAY		GENMASK(27, 24)
+#define STM32_RTC_ALRMXR_DATE_MASK	BIT(31)
+
+/* STM32_RTC_WPR key constants */
+#define RTC_WPR_1ST_KEY			0xCA
+#define RTC_WPR_2ND_KEY			0x53
+#define RTC_WPR_WRONG_KEY		0xFF
+
+/*
+ * RTC registers are protected against parasitic write access.
+ * PWR_CR_DBP bit must be set to enable write access to RTC registers.
+ */
+/* STM32_PWR_CR */
+#define PWR_CR				0x00
+/* STM32_PWR_CR bit field */
+#define PWR_CR_DBP			BIT(8)
+
+struct stm32_rtc_data {
+	bool has_pclk;
+};
+
+struct stm32_rtc {
+	struct rtc_device *rtc_dev;
+	void __iomem *base;
+	struct regmap *dbp;
+	struct stm32_rtc_data *data;
+	struct clk *pclk;
+	struct clk *rtc_ck;
+	int irq_alarm;
+};
+
+static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
+{
+	writel_relaxed(RTC_WPR_1ST_KEY, rtc->base + STM32_RTC_WPR);
+	writel_relaxed(RTC_WPR_2ND_KEY, rtc->base + STM32_RTC_WPR);
+}
+
+static void stm32_rtc_wpr_lock(struct stm32_rtc *rtc)
+{
+	writel_relaxed(RTC_WPR_WRONG_KEY, rtc->base + STM32_RTC_WPR);
+}
+
+static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	if (!(isr & STM32_RTC_ISR_INITF)) {
+		isr |= STM32_RTC_ISR_INIT;
+		writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+		/*
+		 * It takes around 2 rtc_ck clock cycles to enter in
+		 * initialization phase mode (and have INITF flag set). As
+		 * slowest rtc_ck frequency may be 32kHz and highest should be
+		 * 1MHz, we poll every 10 us with a timeout of 100ms.
+		 */
+		return readl_relaxed_poll_timeout_atomic(
+					rtc->base + STM32_RTC_ISR,
+					isr, (isr & STM32_RTC_ISR_INITF),
+					10, 100000);
+	}
+
+	return 0;
+}
+
+static void stm32_rtc_exit_init_mode(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	isr &= ~STM32_RTC_ISR_INIT;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+}
+
+static int stm32_rtc_wait_sync(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	isr &= ~STM32_RTC_ISR_RSF;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+	/*
+	 * Wait for RSF to be set to ensure the calendar registers are
+	 * synchronised, it takes around 2 rtc_ck clock cycles
+	 */
+	return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
+						 isr,
+						 (isr & STM32_RTC_ISR_RSF),
+						 10, 100000);
+}
+
+static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
+{
+	struct stm32_rtc *rtc = (struct stm32_rtc *)dev_id;
+	unsigned int isr, cr;
+
+	mutex_lock(&rtc->rtc_dev->ops_lock);
+
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+
+	if ((isr & STM32_RTC_ISR_ALRAF) &&
+	    (cr & STM32_RTC_CR_ALRAIE)) {
+		/* Alarm A flag - Alarm interrupt */
+		dev_dbg(&rtc->rtc_dev->dev, "Alarm occurred\n");
+
+		/* Pass event to the kernel */
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+		/* Clear event flag, otherwise new events won't be received */
+		writel_relaxed(isr & ~STM32_RTC_ISR_ALRAF,
+			       rtc->base + STM32_RTC_ISR);
+	}
+
+	mutex_unlock(&rtc->rtc_dev->ops_lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Convert rtc_time structure from bin to bcd format */
+static void tm2bcd(struct rtc_time *tm)
+{
+	tm->tm_sec = bin2bcd(tm->tm_sec);
+	tm->tm_min = bin2bcd(tm->tm_min);
+	tm->tm_hour = bin2bcd(tm->tm_hour);
+
+	tm->tm_mday = bin2bcd(tm->tm_mday);
+	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
+	tm->tm_year = bin2bcd(tm->tm_year - 100);
+	/*
+	 * Number of days since Sunday
+	 * - on kernel side, 0=Sunday...6=Saturday
+	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
+	 */
+	tm->tm_wday = (!tm->tm_wday) ? 7 : tm->tm_wday;
+}
+
+/* Convert rtc_time structure from bcd to bin format */
+static void bcd2tm(struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
+	tm->tm_year = bcd2bin(tm->tm_year) + 100;
+	/*
+	 * Number of days since Sunday
+	 * - on kernel side, 0=Sunday...6=Saturday
+	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
+	 */
+	tm->tm_wday %= 7;
+}
+
+static int stm32_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tr, dr;
+
+	/* Time and Date in BCD format */
+	tr = readl_relaxed(rtc->base + STM32_RTC_TR);
+	dr = readl_relaxed(rtc->base + STM32_RTC_DR);
+
+	tm->tm_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
+	tm->tm_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
+	tm->tm_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
+
+	tm->tm_mday = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
+	tm->tm_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
+	tm->tm_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
+	tm->tm_wday = (dr & STM32_RTC_DR_WDAY) >> STM32_RTC_DR_WDAY_SHIFT;
+
+	/* We don't report tm_yday and tm_isdst */
+
+	bcd2tm(tm);
+
+	return 0;
+}
+
+static int stm32_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tr, dr;
+	int ret = 0;
+
+	tm2bcd(tm);
+
+	/* Time in BCD format */
+	tr = ((tm->tm_sec << STM32_RTC_TR_SEC_SHIFT) & STM32_RTC_TR_SEC) |
+	     ((tm->tm_min << STM32_RTC_TR_MIN_SHIFT) & STM32_RTC_TR_MIN) |
+	     ((tm->tm_hour << STM32_RTC_TR_HOUR_SHIFT) & STM32_RTC_TR_HOUR);
+
+	/* Date in BCD format */
+	dr = ((tm->tm_mday << STM32_RTC_DR_DATE_SHIFT) & STM32_RTC_DR_DATE) |
+	     ((tm->tm_mon << STM32_RTC_DR_MONTH_SHIFT) & STM32_RTC_DR_MONTH) |
+	     ((tm->tm_year << STM32_RTC_DR_YEAR_SHIFT) & STM32_RTC_DR_YEAR) |
+	     ((tm->tm_wday << STM32_RTC_DR_WDAY_SHIFT) & STM32_RTC_DR_WDAY);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	ret = stm32_rtc_enter_init_mode(rtc);
+	if (ret) {
+		dev_err(dev, "Can't enter in init mode. Set time aborted.\n");
+		goto end;
+	}
+
+	writel_relaxed(tr, rtc->base + STM32_RTC_TR);
+	writel_relaxed(dr, rtc->base + STM32_RTC_DR);
+
+	stm32_rtc_exit_init_mode(rtc);
+
+	ret = stm32_rtc_wait_sync(rtc);
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	return ret;
+}
+
+static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned int alrmar, cr, isr;
+
+	alrmar = readl_relaxed(rtc->base + STM32_RTC_ALRMAR);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
+		/*
+		 * Date/day doesn't matter in Alarm comparison so alarm
+		 * triggers every day
+		 */
+		tm->tm_mday = -1;
+		tm->tm_wday = -1;
+	} else {
+		if (alrmar & STM32_RTC_ALRMXR_WDSEL) {
+			/* Alarm is set to a day of week */
+			tm->tm_mday = -1;
+			tm->tm_wday = (alrmar & STM32_RTC_ALRMXR_WDAY) >>
+				      STM32_RTC_ALRMXR_WDAY_SHIFT;
+			tm->tm_wday %= 7;
+		} else {
+			/* Alarm is set to a day of month */
+			tm->tm_wday = -1;
+			tm->tm_mday = (alrmar & STM32_RTC_ALRMXR_DATE) >>
+				       STM32_RTC_ALRMXR_DATE_SHIFT;
+		}
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_HOUR_MASK) {
+		/* Hours don't matter in Alarm comparison */
+		tm->tm_hour = -1;
+	} else {
+		tm->tm_hour = (alrmar & STM32_RTC_ALRMXR_HOUR) >>
+			       STM32_RTC_ALRMXR_HOUR_SHIFT;
+		if (alrmar & STM32_RTC_ALRMXR_PM)
+			tm->tm_hour += 12;
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_MIN_MASK) {
+		/* Minutes don't matter in Alarm comparison */
+		tm->tm_min = -1;
+	} else {
+		tm->tm_min = (alrmar & STM32_RTC_ALRMXR_MIN) >>
+			      STM32_RTC_ALRMXR_MIN_SHIFT;
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_SEC_MASK) {
+		/* Seconds don't matter in Alarm comparison */
+		tm->tm_sec = -1;
+	} else {
+		tm->tm_sec = (alrmar & STM32_RTC_ALRMXR_SEC) >>
+			      STM32_RTC_ALRMXR_SEC_SHIFT;
+	}
+
+	bcd2tm(tm);
+
+	alrm->enabled = (cr & STM32_RTC_CR_ALRAE) ? 1 : 0;
+	alrm->pending = (isr & STM32_RTC_ISR_ALRAF) ? 1 : 0;
+
+	return 0;
+}
+
+static int stm32_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int isr, cr;
+
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	/* We expose Alarm A to the kernel */
+	if (enabled)
+		cr |= (STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
+	else
+		cr &= ~(STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	/* Clear event flag, otherwise new events won't be received */
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+	isr &= ~STM32_RTC_ISR_ALRAF;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+	stm32_rtc_wpr_lock(rtc);
+
+	return 0;
+}
+
+static int stm32_rtc_valid_alrm(struct stm32_rtc *rtc, struct rtc_time *tm)
+{
+	int cur_day, cur_mon, cur_year, cur_hour, cur_min, cur_sec;
+	unsigned int dr = readl_relaxed(rtc->base + STM32_RTC_DR);
+	unsigned int tr = readl_relaxed(rtc->base + STM32_RTC_TR);
+
+	cur_day = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
+	cur_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
+	cur_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
+	cur_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
+	cur_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
+	cur_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
+
+	/*
+	 * Assuming current date is M-D-Y H:M:S.
+	 * RTC alarm can't be set on a specific month and year.
+	 * So the valid alarm range is:
+	 *	M-D-Y H:M:S < alarm <= (M+1)-D-Y H:M:S
+	 * with a specific case for December...
+	 */
+	if ((((tm->tm_year > cur_year) &&
+	      (tm->tm_mon == 0x1) && (cur_mon == 0x12)) ||
+	     ((tm->tm_year == cur_year) &&
+	      (tm->tm_mon <= cur_mon + 1))) &&
+	    ((tm->tm_mday > cur_day) ||
+	     ((tm->tm_mday == cur_day) &&
+	     ((tm->tm_hour > cur_hour) ||
+	      ((tm->tm_hour == cur_hour) && (tm->tm_min > cur_min)) ||
+	      ((tm->tm_hour == cur_hour) && (tm->tm_min == cur_min) &&
+	       (tm->tm_sec >= cur_sec))))))
+		return 0;
+
+	return -EINVAL;
+}
+
+static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned int cr, isr, alrmar;
+	int ret = 0;
+
+	tm2bcd(tm);
+
+	/*
+	 * RTC alarm can't be set on a specific date, unless this date is
+	 * up to the same day of month next month.
+	 */
+	if (stm32_rtc_valid_alrm(rtc, tm) < 0) {
+		dev_err(dev, "Alarm can be set only on upcoming month.\n");
+		return -EINVAL;
+	}
+
+	alrmar = 0;
+	/* tm_year and tm_mon are not used because not supported by RTC */
+	alrmar |= (tm->tm_mday << STM32_RTC_ALRMXR_DATE_SHIFT) &
+		  STM32_RTC_ALRMXR_DATE;
+	/* 24-hour format */
+	alrmar &= ~STM32_RTC_ALRMXR_PM;
+	alrmar |= (tm->tm_hour << STM32_RTC_ALRMXR_HOUR_SHIFT) &
+		  STM32_RTC_ALRMXR_HOUR;
+	alrmar |= (tm->tm_min << STM32_RTC_ALRMXR_MIN_SHIFT) &
+		  STM32_RTC_ALRMXR_MIN;
+	alrmar |= (tm->tm_sec << STM32_RTC_ALRMXR_SEC_SHIFT) &
+		  STM32_RTC_ALRMXR_SEC;
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	/* Disable Alarm */
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_ALRAE;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	/*
+	 * Poll Alarm write flag to be sure that Alarm update is allowed: it
+	 * takes around 2 rtc_ck clock cycles
+	 */
+	ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
+						isr,
+						(isr & STM32_RTC_ISR_ALRAWF),
+						10, 100000);
+
+	if (ret) {
+		dev_err(dev, "Alarm update not allowed\n");
+		goto end;
+	}
+
+	/* Write to Alarm register */
+	writel_relaxed(alrmar, rtc->base + STM32_RTC_ALRMAR);
+
+	if (alrm->enabled)
+		stm32_rtc_alarm_irq_enable(dev, 1);
+	else
+		stm32_rtc_alarm_irq_enable(dev, 0);
+
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	return ret;
+}
+
+static const struct rtc_class_ops stm32_rtc_ops = {
+	.read_time	= stm32_rtc_read_time,
+	.set_time	= stm32_rtc_set_time,
+	.read_alarm	= stm32_rtc_read_alarm,
+	.set_alarm	= stm32_rtc_set_alarm,
+	.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
+};
+
+static const struct stm32_rtc_data stm32_rtc_data = {
+	.has_pclk = false,
+};
+
+static const struct stm32_rtc_data stm32h7_rtc_data = {
+	.has_pclk = true,
+};
+
+static const struct of_device_id stm32_rtc_of_match[] = {
+	{ .compatible = "st,stm32-rtc", .data = &stm32_rtc_data },
+	{ .compatible = "st,stm32h7-rtc", .data = &stm32h7_rtc_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
+
+static int stm32_rtc_init(struct platform_device *pdev,
+			  struct stm32_rtc *rtc)
+{
+	unsigned int prer, pred_a, pred_s, pred_a_max, pred_s_max, cr;
+	unsigned int rate;
+	int ret = 0;
+
+	rate = clk_get_rate(rtc->rtc_ck);
+
+	/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
+	pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
+	pred_s_max = STM32_RTC_PRER_PRED_S >> STM32_RTC_PRER_PRED_S_SHIFT;
+
+	for (pred_a = pred_a_max; pred_a + 1 > 0; pred_a--) {
+		pred_s = (rate / (pred_a + 1)) - 1;
+
+		if (((pred_s + 1) * (pred_a + 1)) == rate)
+			break;
+	}
+
+	/*
+	 * Can't find a 1Hz, so give priority to RTC power consumption
+	 * by choosing the higher possible value for prediv_a
+	 */
+	if ((pred_s > pred_s_max) || (pred_a > pred_a_max)) {
+		pred_a = pred_a_max;
+		pred_s = (rate / (pred_a + 1)) - 1;
+
+		dev_warn(&pdev->dev, "rtc_ck is %s\n",
+			 (rate < ((pred_a + 1) * (pred_s + 1))) ?
+			 "fast" : "slow");
+	}
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	ret = stm32_rtc_enter_init_mode(rtc);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Can't enter in init mode. Prescaler config failed.\n");
+		goto end;
+	}
+
+	prer = (pred_s << STM32_RTC_PRER_PRED_S_SHIFT) & STM32_RTC_PRER_PRED_S;
+	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
+	prer |= (pred_a << STM32_RTC_PRER_PRED_A_SHIFT) & STM32_RTC_PRER_PRED_A;
+	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
+
+	/* Force 24h time format */
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_FMT;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	stm32_rtc_exit_init_mode(rtc);
+
+	ret = stm32_rtc_wait_sync(rtc);
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	return ret;
+}
+
+static int stm32_rtc_probe(struct platform_device *pdev)
+{
+	struct stm32_rtc *rtc;
+	struct resource *res;
+	const struct of_device_id *match;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->base))
+		return PTR_ERR(rtc->base);
+
+	rtc->dbp = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						   "st,syscfg");
+	if (IS_ERR(rtc->dbp)) {
+		dev_err(&pdev->dev, "no st,syscfg\n");
+		return PTR_ERR(rtc->dbp);
+	}
+
+	match = of_match_device(stm32_rtc_of_match, &pdev->dev);
+	rtc->data = (struct stm32_rtc_data *)match->data;
+
+	if (!rtc->data->has_pclk) {
+		rtc->pclk = NULL;
+		rtc->rtc_ck = devm_clk_get(&pdev->dev, NULL);
+	} else {
+		rtc->pclk = devm_clk_get(&pdev->dev, "pclk");
+		if (IS_ERR(rtc->pclk)) {
+			dev_err(&pdev->dev, "no pclk clock");
+			return PTR_ERR(rtc->pclk);
+		}
+		rtc->rtc_ck = devm_clk_get(&pdev->dev, "rtc_ck");
+	}
+	if (IS_ERR(rtc->rtc_ck)) {
+		dev_err(&pdev->dev, "no rtc_ck clock");
+		return PTR_ERR(rtc->rtc_ck);
+	}
+
+	if (rtc->data->has_pclk) {
+		ret = clk_prepare_enable(rtc->pclk);
+		if (ret)
+			return ret;
+	}
+
+	ret = clk_prepare_enable(rtc->rtc_ck);
+	if (ret)
+		goto err;
+
+	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
+
+	/*
+	 * After a system reset, RTC_ISR.INITS flag can be read to check if
+	 * the calendar has been initalized or not. INITS flag is reset by a
+	 * power-on reset (no vbat, no power-supply). It is not reset if
+	 * rtc_ck parent clock has changed (so RTC prescalers need to be
+	 * changed). That's why we cannot rely on this flag to know if RTC
+	 * init has to be done.
+	 */
+	ret = stm32_rtc_init(pdev, rtc);
+	if (ret)
+		goto err;
+
+	rtc->irq_alarm = platform_get_irq(pdev, 0);
+	if (rtc->irq_alarm <= 0) {
+		dev_err(&pdev->dev, "no alarm irq\n");
+		ret = rtc->irq_alarm;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	ret = device_init_wakeup(&pdev->dev, true);
+	if (ret)
+		dev_warn(&pdev->dev,
+			 "alarm won't be able to wake up the system");
+
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+			&stm32_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		dev_err(&pdev->dev, "rtc device registration failed, err=%d\n",
+			ret);
+		goto err;
+	}
+
+	/* Handle RTC alarm interrupts */
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq_alarm, NULL,
+					stm32_rtc_alarm_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d (alarm interrupt) already claimed\n",
+			rtc->irq_alarm);
+		goto err;
+	}
+
+	/*
+	 * If INITS flag is reset (calendar year field set to 0x00), calendar
+	 * must be initialized
+	 */
+	if (!(readl_relaxed(rtc->base + STM32_RTC_ISR) & STM32_RTC_ISR_INITS))
+		dev_warn(&pdev->dev, "Date/Time must be initialized\n");
+
+	return 0;
+err:
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
+	clk_disable_unprepare(rtc->rtc_ck);
+
+	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
+
+	device_init_wakeup(&pdev->dev, false);
+
+	return ret;
+}
+
+static int stm32_rtc_remove(struct platform_device *pdev)
+{
+	struct stm32_rtc *rtc = platform_get_drvdata(pdev);
+	unsigned int cr;
+
+	/* Disable interrupts */
+	stm32_rtc_wpr_unlock(rtc);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_ALRAIE;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+	stm32_rtc_wpr_lock(rtc);
+
+	clk_disable_unprepare(rtc->rtc_ck);
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
+
+	/* Enable backup domain write protection */
+	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
+
+	device_init_wakeup(&pdev->dev, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm32_rtc_suspend(struct device *dev)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(rtc->irq_alarm);
+
+	return 0;
+}
+
+static int stm32_rtc_resume(struct device *dev)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (rtc->data->has_pclk) {
+		ret = clk_prepare_enable(rtc->pclk);
+		if (ret)
+			return ret;
+	}
+
+	ret = stm32_rtc_wait_sync(rtc);
+	if (ret < 0)
+		return ret;
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(rtc->irq_alarm);
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stm32_rtc_pm_ops,
+			 stm32_rtc_suspend, stm32_rtc_resume);
+
+static struct platform_driver stm32_rtc_driver = {
+	.probe		= stm32_rtc_probe,
+	.remove		= stm32_rtc_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.pm	= &stm32_rtc_pm_ops,
+		.of_match_table = stm32_rtc_of_match,
+	},
+};
+
+module_platform_driver(stm32_rtc_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Real Time Clock driver");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-stmp3xxx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-stmp3xxx.c
new file mode 100644
index 0000000..d578e40
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-stmp3xxx.c
@@ -0,0 +1,412 @@
+/*
+ * Freescale STMP37XX/STMP378X Real Time Clock driver
+ *
+ * Copyright (c) 2007 Sigmatel, Inc.
+ * Peter Hartley, <peter.hartley@sigmatel.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ * Copyright 2011 Wolfram Sang, Pengutronix e.K.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/stmp_device.h>
+#include <linux/stmp3xxx_rtc_wdt.h>
+
+#define STMP3XXX_RTC_CTRL			0x0
+#define STMP3XXX_RTC_CTRL_ALARM_IRQ_EN		0x00000001
+#define STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define STMP3XXX_RTC_CTRL_ALARM_IRQ		0x00000004
+#define STMP3XXX_RTC_CTRL_WATCHDOGEN		0x00000010
+
+#define STMP3XXX_RTC_STAT			0x10
+#define STMP3XXX_RTC_STAT_STALE_SHIFT		16
+#define STMP3XXX_RTC_STAT_RTC_PRESENT		0x80000000
+#define STMP3XXX_RTC_STAT_XTAL32000_PRESENT	0x10000000
+#define STMP3XXX_RTC_STAT_XTAL32768_PRESENT	0x08000000
+
+#define STMP3XXX_RTC_SECONDS			0x30
+
+#define STMP3XXX_RTC_ALARM			0x40
+
+#define STMP3XXX_RTC_WATCHDOG			0x50
+
+#define STMP3XXX_RTC_PERSISTENT0		0x60
+#define STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE		(1 << 0)
+#define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN		(1 << 1)
+#define STMP3XXX_RTC_PERSISTENT0_ALARM_EN		(1 << 2)
+#define STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	(1 << 4)
+#define STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	(1 << 5)
+#define STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ		(1 << 6)
+#define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE		(1 << 7)
+
+#define STMP3XXX_RTC_PERSISTENT1		0x70
+/* missing bitmask in headers */
+#define STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER	0x80000000
+
+struct stmp3xxx_rtc_data {
+	struct rtc_device *rtc;
+	void __iomem *io;
+	int irq_alarm;
+};
+
+#if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
+/**
+ * stmp3xxx_wdt_set_timeout - configure the watchdog inside the STMP3xxx RTC
+ * @dev: the parent device of the watchdog (= the RTC)
+ * @timeout: the desired value for the timeout register of the watchdog.
+ *           0 disables the watchdog
+ *
+ * The watchdog needs one register and two bits which are in the RTC domain.
+ * To handle the resource conflict, the RTC driver will create another
+ * platform_device for the watchdog driver as a child of the RTC device.
+ * The watchdog driver is passed the below accessor function via platform_data
+ * to configure the watchdog. Locking is not needed because accessing SET/CLR
+ * registers is atomic.
+ */
+
+static void stmp3xxx_wdt_set_timeout(struct device *dev, u32 timeout)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (timeout) {
+		writel(timeout, rtc_data->io + STMP3XXX_RTC_WATCHDOG);
+		writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
+		       rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
+		writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
+		       rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_SET);
+	} else {
+		writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
+		       rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
+		writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
+		       rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_CLR);
+	}
+}
+
+static struct stmp3xxx_wdt_pdata wdt_pdata = {
+	.wdt_set_timeout = stmp3xxx_wdt_set_timeout,
+};
+
+static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
+{
+	int rc = -1;
+	struct platform_device *wdt_pdev =
+		platform_device_alloc("stmp3xxx_rtc_wdt", rtc_pdev->id);
+
+	if (wdt_pdev) {
+		wdt_pdev->dev.parent = &rtc_pdev->dev;
+		wdt_pdev->dev.platform_data = &wdt_pdata;
+		rc = platform_device_add(wdt_pdev);
+	}
+
+	if (rc)
+		dev_err(&rtc_pdev->dev,
+			"failed to register stmp3xxx_rtc_wdt\n");
+}
+#else
+static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
+{
+}
+#endif /* CONFIG_STMP3XXX_RTC_WATCHDOG */
+
+static int stmp3xxx_wait_time(struct stmp3xxx_rtc_data *rtc_data)
+{
+	int timeout = 5000; /* 3ms according to i.MX28 Ref Manual */
+	/*
+	 * The i.MX28 Applications Processor Reference Manual, Rev. 1, 2010
+	 * states:
+	 * | The order in which registers are updated is
+	 * | Persistent 0, 1, 2, 3, 4, 5, Alarm, Seconds.
+	 * | (This list is in bitfield order, from LSB to MSB, as they would
+	 * | appear in the STALE_REGS and NEW_REGS bitfields of the HW_RTC_STAT
+	 * | register. For example, the Seconds register corresponds to
+	 * | STALE_REGS or NEW_REGS containing 0x80.)
+	 */
+	do {
+		if (!(readl(rtc_data->io + STMP3XXX_RTC_STAT) &
+				(0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)))
+			return 0;
+		udelay(1);
+	} while (--timeout > 0);
+	return (readl(rtc_data->io + STMP3XXX_RTC_STAT) &
+		(0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)) ? -ETIME : 0;
+}
+
+/* Time read/write */
+static int stmp3xxx_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	int ret;
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	ret = stmp3xxx_wait_time(rtc_data);
+	if (ret)
+		return ret;
+
+	rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_SECONDS), rtc_tm);
+	return 0;
+}
+
+static int stmp3xxx_rtc_set_mmss(struct device *dev, unsigned long t)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	writel(t, rtc_data->io + STMP3XXX_RTC_SECONDS);
+	return stmp3xxx_wait_time(rtc_data);
+}
+
+/* interrupt(s) handler */
+static irqreturn_t stmp3xxx_rtc_interrupt(int irq, void *dev_id)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev_id);
+	u32 status = readl(rtc_data->io + STMP3XXX_RTC_CTRL);
+
+	if (status & STMP3XXX_RTC_CTRL_ALARM_IRQ) {
+		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ,
+			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
+		rtc_update_irq(rtc_data->rtc, 1, RTC_AF | RTC_IRQF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int stmp3xxx_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (enabled) {
+		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
+				STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
+				STMP_OFFSET_REG_SET);
+		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
+			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
+	} else {
+		writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
+				STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
+			rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
+				STMP_OFFSET_REG_CLR);
+		writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
+			rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
+	}
+	return 0;
+}
+
+static int stmp3xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_ALARM), &alm->time);
+	return 0;
+}
+
+static int stmp3xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned long t;
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	rtc_tm_to_time(&alm->time, &t);
+	writel(t, rtc_data->io + STMP3XXX_RTC_ALARM);
+
+	stmp3xxx_alarm_irq_enable(dev, alm->enabled);
+
+	return 0;
+}
+
+static const struct rtc_class_ops stmp3xxx_rtc_ops = {
+	.alarm_irq_enable =
+			  stmp3xxx_alarm_irq_enable,
+	.read_time	= stmp3xxx_rtc_gettime,
+	.set_mmss	= stmp3xxx_rtc_set_mmss,
+	.read_alarm	= stmp3xxx_rtc_read_alarm,
+	.set_alarm	= stmp3xxx_rtc_set_alarm,
+};
+
+static int stmp3xxx_rtc_remove(struct platform_device *pdev)
+{
+	struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(pdev);
+
+	if (!rtc_data)
+		return 0;
+
+	writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
+		rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
+
+	return 0;
+}
+
+static int stmp3xxx_rtc_probe(struct platform_device *pdev)
+{
+	struct stmp3xxx_rtc_data *rtc_data;
+	struct resource *r;
+	u32 rtc_stat;
+	u32 pers0_set, pers0_clr;
+	u32 crystalfreq = 0;
+	int err;
+
+	rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
+	if (!rtc_data)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get resource\n");
+		return -ENXIO;
+	}
+
+	rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!rtc_data->io) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -EIO;
+	}
+
+	rtc_data->irq_alarm = platform_get_irq(pdev, 0);
+
+	rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
+	if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
+		dev_err(&pdev->dev, "no device onboard\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, rtc_data);
+
+	err = stmp_reset_block(rtc_data->io);
+	if (err) {
+		dev_err(&pdev->dev, "stmp_reset_block failed: %d\n", err);
+		return err;
+	}
+
+	/*
+	 * Obviously the rtc needs a clock input to be able to run.
+	 * This clock can be provided by an external 32k crystal. If that one is
+	 * missing XTAL must not be disabled in suspend which consumes a
+	 * lot of power. Normally the presence and exact frequency (supported
+	 * are 32000 Hz and 32768 Hz) is detectable from fuses, but as reality
+	 * proves these fuses are not blown correctly on all machines, so the
+	 * frequency can be overridden in the device tree.
+	 */
+	if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32000_PRESENT)
+		crystalfreq = 32000;
+	else if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32768_PRESENT)
+		crystalfreq = 32768;
+
+	of_property_read_u32(pdev->dev.of_node, "stmp,crystal-freq",
+			     &crystalfreq);
+
+	switch (crystalfreq) {
+	case 32000:
+		/* keep 32kHz crystal running in low-power mode */
+		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ |
+			STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
+		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
+		break;
+	case 32768:
+		/* keep 32.768kHz crystal running in low-power mode */
+		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
+		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ;
+		break;
+	default:
+		dev_warn(&pdev->dev,
+			 "invalid crystal-freq specified in device-tree. Assuming no crystal\n");
+		/* fall-through */
+	case 0:
+		/* keep XTAL on in low-power mode */
+		pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
+		pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
+			STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
+	}
+
+	writel(pers0_set, rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
+			STMP_OFFSET_REG_SET);
+
+	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
+			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
+			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE | pers0_clr,
+		rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
+
+	writel(STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN |
+			STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
+		rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
+
+	rtc_data->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				&stmp3xxx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc_data->rtc))
+		return PTR_ERR(rtc_data->rtc);
+
+	err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
+			stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
+			rtc_data->irq_alarm);
+		return err;
+	}
+
+	stmp3xxx_wdt_register(pdev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stmp3xxx_rtc_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int stmp3xxx_rtc_resume(struct device *dev)
+{
+	struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	stmp_reset_block(rtc_data->io);
+	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
+			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
+			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
+		rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stmp3xxx_rtc_pm_ops, stmp3xxx_rtc_suspend,
+			stmp3xxx_rtc_resume);
+
+static const struct of_device_id rtc_dt_ids[] = {
+	{ .compatible = "fsl,stmp3xxx-rtc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtc_dt_ids);
+
+static struct platform_driver stmp3xxx_rtcdrv = {
+	.probe		= stmp3xxx_rtc_probe,
+	.remove		= stmp3xxx_rtc_remove,
+	.driver		= {
+		.name	= "stmp3xxx-rtc",
+		.pm	= &stmp3xxx_rtc_pm_ops,
+		.of_match_table = rtc_dt_ids,
+	},
+};
+
+module_platform_driver(stmp3xxx_rtcdrv);
+
+MODULE_DESCRIPTION("STMP3xxx RTC Driver");
+MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com> and "
+		"Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sun4v.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sun4v.c
new file mode 100644
index 0000000..11bc562
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sun4v.c
@@ -0,0 +1,103 @@
+/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems.
+ *
+ * Author: David S. Miller
+ * License: GPL
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/hypervisor.h>
+
+static unsigned long hypervisor_get_time(void)
+{
+	unsigned long ret, time;
+	int retries = 10000;
+
+retry:
+	ret = sun4v_tod_get(&time);
+	if (ret == HV_EOK)
+		return time;
+	if (ret == HV_EWOULDBLOCK) {
+		if (--retries > 0) {
+			udelay(100);
+			goto retry;
+		}
+		pr_warn("tod_get() timed out.\n");
+		return 0;
+	}
+	pr_warn("tod_get() not supported.\n");
+	return 0;
+}
+
+static int sun4v_read_time(struct device *dev, struct rtc_time *tm)
+{
+	rtc_time_to_tm(hypervisor_get_time(), tm);
+	return 0;
+}
+
+static int hypervisor_set_time(unsigned long secs)
+{
+	unsigned long ret;
+	int retries = 10000;
+
+retry:
+	ret = sun4v_tod_set(secs);
+	if (ret == HV_EOK)
+		return 0;
+	if (ret == HV_EWOULDBLOCK) {
+		if (--retries > 0) {
+			udelay(100);
+			goto retry;
+		}
+		pr_warn("tod_set() timed out.\n");
+		return -EAGAIN;
+	}
+	pr_warn("tod_set() not supported.\n");
+	return -EOPNOTSUPP;
+}
+
+static int sun4v_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned long secs;
+	int err;
+
+	err = rtc_tm_to_time(tm, &secs);
+	if (err)
+		return err;
+
+	return hypervisor_set_time(secs);
+}
+
+static const struct rtc_class_ops sun4v_rtc_ops = {
+	.read_time	= sun4v_read_time,
+	.set_time	= sun4v_set_time,
+};
+
+static int __init sun4v_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+
+	rtc = devm_rtc_device_register(&pdev->dev, "sun4v",
+				&sun4v_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+	return 0;
+}
+
+static struct platform_driver sun4v_rtc_driver = {
+	.driver		= {
+		.name	= "rtc-sun4v",
+	},
+};
+
+builtin_platform_driver_probe(sun4v_rtc_driver, sun4v_rtc_probe);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sun6i.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sun6i.c
new file mode 100644
index 0000000..8eb2b6d
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sun6i.c
@@ -0,0 +1,593 @@
+/*
+ * An RTC driver for Allwinner A31/A23
+ *
+ * Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org>
+ *
+ * based on rtc-sunxi.c
+ *
+ * An RTC driver for Allwinner A10/A20
+ *
+ * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* Control register */
+#define SUN6I_LOSC_CTRL				0x0000
+#define SUN6I_LOSC_CTRL_KEY			(0x16aa << 16)
+#define SUN6I_LOSC_CTRL_ALM_DHMS_ACC		BIT(9)
+#define SUN6I_LOSC_CTRL_RTC_HMS_ACC		BIT(8)
+#define SUN6I_LOSC_CTRL_RTC_YMD_ACC		BIT(7)
+#define SUN6I_LOSC_CTRL_EXT_OSC			BIT(0)
+#define SUN6I_LOSC_CTRL_ACC_MASK		GENMASK(9, 7)
+
+#define SUN6I_LOSC_CLK_PRESCAL			0x0008
+
+/* RTC */
+#define SUN6I_RTC_YMD				0x0010
+#define SUN6I_RTC_HMS				0x0014
+
+/* Alarm 0 (counter) */
+#define SUN6I_ALRM_COUNTER			0x0020
+#define SUN6I_ALRM_CUR_VAL			0x0024
+#define SUN6I_ALRM_EN				0x0028
+#define SUN6I_ALRM_EN_CNT_EN			BIT(0)
+#define SUN6I_ALRM_IRQ_EN			0x002c
+#define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN		BIT(0)
+#define SUN6I_ALRM_IRQ_STA			0x0030
+#define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND		BIT(0)
+
+/* Alarm 1 (wall clock) */
+#define SUN6I_ALRM1_EN				0x0044
+#define SUN6I_ALRM1_IRQ_EN			0x0048
+#define SUN6I_ALRM1_IRQ_STA			0x004c
+#define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND	BIT(0)
+
+/* Alarm config */
+#define SUN6I_ALARM_CONFIG			0x0050
+#define SUN6I_ALARM_CONFIG_WAKEUP		BIT(0)
+
+#define SUN6I_LOSC_OUT_GATING			0x0060
+#define SUN6I_LOSC_OUT_GATING_EN_OFFSET		0
+
+/*
+ * Get date values
+ */
+#define SUN6I_DATE_GET_DAY_VALUE(x)		((x)  & 0x0000001f)
+#define SUN6I_DATE_GET_MON_VALUE(x)		(((x) & 0x00000f00) >> 8)
+#define SUN6I_DATE_GET_YEAR_VALUE(x)		(((x) & 0x003f0000) >> 16)
+#define SUN6I_LEAP_GET_VALUE(x)			(((x) & 0x00400000) >> 22)
+
+/*
+ * Get time values
+ */
+#define SUN6I_TIME_GET_SEC_VALUE(x)		((x)  & 0x0000003f)
+#define SUN6I_TIME_GET_MIN_VALUE(x)		(((x) & 0x00003f00) >> 8)
+#define SUN6I_TIME_GET_HOUR_VALUE(x)		(((x) & 0x001f0000) >> 16)
+
+/*
+ * Set date values
+ */
+#define SUN6I_DATE_SET_DAY_VALUE(x)		((x)       & 0x0000001f)
+#define SUN6I_DATE_SET_MON_VALUE(x)		((x) <<  8 & 0x00000f00)
+#define SUN6I_DATE_SET_YEAR_VALUE(x)		((x) << 16 & 0x003f0000)
+#define SUN6I_LEAP_SET_VALUE(x)			((x) << 22 & 0x00400000)
+
+/*
+ * Set time values
+ */
+#define SUN6I_TIME_SET_SEC_VALUE(x)		((x)       & 0x0000003f)
+#define SUN6I_TIME_SET_MIN_VALUE(x)		((x) <<  8 & 0x00003f00)
+#define SUN6I_TIME_SET_HOUR_VALUE(x)		((x) << 16 & 0x001f0000)
+
+/*
+ * The year parameter passed to the driver is usually an offset relative to
+ * the year 1900. This macro is used to convert this offset to another one
+ * relative to the minimum year allowed by the hardware.
+ *
+ * The year range is 1970 - 2033. This range is selected to match Allwinner's
+ * driver, even though it is somewhat limited.
+ */
+#define SUN6I_YEAR_MIN				1970
+#define SUN6I_YEAR_MAX				2033
+#define SUN6I_YEAR_OFF				(SUN6I_YEAR_MIN - 1900)
+
+struct sun6i_rtc_dev {
+	struct rtc_device *rtc;
+	struct device *dev;
+	void __iomem *base;
+	int irq;
+	unsigned long alarm;
+
+	struct clk_hw hw;
+	struct clk_hw *int_osc;
+	struct clk *losc;
+	struct clk *ext_losc;
+
+	spinlock_t lock;
+};
+
+static struct sun6i_rtc_dev *sun6i_rtc;
+
+static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+	u32 val;
+
+	val = readl(rtc->base + SUN6I_LOSC_CTRL);
+	if (val & SUN6I_LOSC_CTRL_EXT_OSC)
+		return parent_rate;
+
+	val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL);
+	val &= GENMASK(4, 0);
+
+	return parent_rate / (val + 1);
+}
+
+static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+
+	return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC;
+}
+
+static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+	unsigned long flags;
+	u32 val;
+
+	if (index > 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	val = readl(rtc->base + SUN6I_LOSC_CTRL);
+	val &= ~SUN6I_LOSC_CTRL_EXT_OSC;
+	val |= SUN6I_LOSC_CTRL_KEY;
+	val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0;
+	writel(val, rtc->base + SUN6I_LOSC_CTRL);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops sun6i_rtc_osc_ops = {
+	.recalc_rate	= sun6i_rtc_osc_recalc_rate,
+
+	.get_parent	= sun6i_rtc_osc_get_parent,
+	.set_parent	= sun6i_rtc_osc_set_parent,
+};
+
+static void __init sun6i_rtc_clk_init(struct device_node *node)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct sun6i_rtc_dev *rtc;
+	struct clk_init_data init = {
+		.ops		= &sun6i_rtc_osc_ops,
+	};
+	const char *clkout_name = "osc32k-out";
+	const char *parents[2];
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return;
+
+	clk_data = kzalloc(sizeof(*clk_data) + (sizeof(*clk_data->hws) * 2),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	spin_lock_init(&rtc->lock);
+
+	rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(rtc->base)) {
+		pr_crit("Can't map RTC registers");
+		goto err;
+	}
+
+	/* Switch to the external, more precise, oscillator */
+	writel(SUN6I_LOSC_CTRL_KEY | SUN6I_LOSC_CTRL_EXT_OSC,
+	       rtc->base + SUN6I_LOSC_CTRL);
+
+	/* Yes, I know, this is ugly. */
+	sun6i_rtc = rtc;
+
+	/* Deal with old DTs */
+	if (!of_get_property(node, "clocks", NULL))
+		goto err;
+
+	rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL,
+								"rtc-int-osc",
+								NULL, 0,
+								667000,
+								300000000);
+	if (IS_ERR(rtc->int_osc)) {
+		pr_crit("Couldn't register the internal oscillator\n");
+		return;
+	}
+
+	parents[0] = clk_hw_get_name(rtc->int_osc);
+	parents[1] = of_clk_get_parent_name(node, 0);
+
+	rtc->hw.init = &init;
+
+	init.parent_names = parents;
+	init.num_parents = of_clk_get_parent_count(node) + 1;
+	of_property_read_string_index(node, "clock-output-names", 0,
+				      &init.name);
+
+	rtc->losc = clk_register(NULL, &rtc->hw);
+	if (IS_ERR(rtc->losc)) {
+		pr_crit("Couldn't register the LOSC clock\n");
+		return;
+	}
+
+	of_property_read_string_index(node, "clock-output-names", 1,
+				      &clkout_name);
+	rtc->ext_losc = clk_register_gate(NULL, clkout_name, rtc->hw.init->name,
+					  0, rtc->base + SUN6I_LOSC_OUT_GATING,
+					  SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0,
+					  &rtc->lock);
+	if (IS_ERR(rtc->ext_losc)) {
+		pr_crit("Couldn't register the LOSC external gate\n");
+		return;
+	}
+
+	clk_data->num = 2;
+	clk_data->hws[0] = &rtc->hw;
+	clk_data->hws[1] = __clk_get_hw(rtc->ext_losc);
+	of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	return;
+
+err:
+	kfree(clk_data);
+}
+CLK_OF_DECLARE_DRIVER(sun6i_rtc_clk, "allwinner,sun6i-a31-rtc",
+		      sun6i_rtc_clk_init);
+
+static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id)
+{
+	struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id;
+	irqreturn_t ret = IRQ_NONE;
+	u32 val;
+
+	spin_lock(&chip->lock);
+	val = readl(chip->base + SUN6I_ALRM_IRQ_STA);
+
+	if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) {
+		val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND;
+		writel(val, chip->base + SUN6I_ALRM_IRQ_STA);
+
+		rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
+
+		ret = IRQ_HANDLED;
+	}
+	spin_unlock(&chip->lock);
+
+	return ret;
+}
+
+static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip)
+{
+	u32 alrm_val = 0;
+	u32 alrm_irq_val = 0;
+	u32 alrm_wake_val = 0;
+	unsigned long flags;
+
+	if (to) {
+		alrm_val = SUN6I_ALRM_EN_CNT_EN;
+		alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN;
+		alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP;
+	} else {
+		writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
+		       chip->base + SUN6I_ALRM_IRQ_STA);
+	}
+
+	spin_lock_irqsave(&chip->lock, flags);
+	writel(alrm_val, chip->base + SUN6I_ALRM_EN);
+	writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN);
+	writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date, time;
+
+	/*
+	 * read again in case it changes
+	 */
+	do {
+		date = readl(chip->base + SUN6I_RTC_YMD);
+		time = readl(chip->base + SUN6I_RTC_HMS);
+	} while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
+		 (time != readl(chip->base + SUN6I_RTC_HMS)));
+
+	rtc_tm->tm_sec  = SUN6I_TIME_GET_SEC_VALUE(time);
+	rtc_tm->tm_min  = SUN6I_TIME_GET_MIN_VALUE(time);
+	rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
+
+	rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
+	rtc_tm->tm_mon  = SUN6I_DATE_GET_MON_VALUE(date);
+	rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
+
+	rtc_tm->tm_mon  -= 1;
+
+	/*
+	 * switch from (data_year->min)-relative offset to
+	 * a (1900)-relative one
+	 */
+	rtc_tm->tm_year += SUN6I_YEAR_OFF;
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	unsigned long flags;
+	u32 alrm_st;
+	u32 alrm_en;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN);
+	alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
+	wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
+	rtc_time_to_tm(chip->alarm, &wkalrm->time);
+
+	return 0;
+}
+
+static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	struct rtc_time *alrm_tm = &wkalrm->time;
+	struct rtc_time tm_now;
+	unsigned long time_now = 0;
+	unsigned long time_set = 0;
+	unsigned long time_gap = 0;
+	int ret = 0;
+
+	ret = sun6i_rtc_gettime(dev, &tm_now);
+	if (ret < 0) {
+		dev_err(dev, "Error in getting time\n");
+		return -EINVAL;
+	}
+
+	rtc_tm_to_time(alrm_tm, &time_set);
+	rtc_tm_to_time(&tm_now, &time_now);
+	if (time_set <= time_now) {
+		dev_err(dev, "Date to set in the past\n");
+		return -EINVAL;
+	}
+
+	time_gap = time_set - time_now;
+
+	if (time_gap > U32_MAX) {
+		dev_err(dev, "Date too far in the future\n");
+		return -EINVAL;
+	}
+
+	sun6i_rtc_setaie(0, chip);
+	writel(0, chip->base + SUN6I_ALRM_COUNTER);
+	usleep_range(100, 300);
+
+	writel(time_gap, chip->base + SUN6I_ALRM_COUNTER);
+	chip->alarm = time_set;
+
+	sun6i_rtc_setaie(wkalrm->enabled, chip);
+
+	return 0;
+}
+
+static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset,
+			  unsigned int mask, unsigned int ms_timeout)
+{
+	const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
+	u32 reg;
+
+	do {
+		reg = readl(chip->base + offset);
+		reg &= mask;
+
+		if (!reg)
+			return 0;
+
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date = 0;
+	u32 time = 0;
+	int year;
+
+	year = rtc_tm->tm_year + 1900;
+	if (year < SUN6I_YEAR_MIN || year > SUN6I_YEAR_MAX) {
+		dev_err(dev, "rtc only supports year in range %d - %d\n",
+			SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
+		return -EINVAL;
+	}
+
+	rtc_tm->tm_year -= SUN6I_YEAR_OFF;
+	rtc_tm->tm_mon += 1;
+
+	date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+		SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
+		SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
+
+	if (is_leap_year(year))
+		date |= SUN6I_LEAP_SET_VALUE(1);
+
+	time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
+		SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min)  |
+		SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
+
+	/* Check whether registers are writable */
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
+		dev_err(dev, "rtc is still busy.\n");
+		return -EBUSY;
+	}
+
+	writel(time, chip->base + SUN6I_RTC_HMS);
+
+	/*
+	 * After writing the RTC HH-MM-SS register, the
+	 * SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -ETIMEDOUT;
+	}
+
+	writel(date, chip->base + SUN6I_RTC_YMD);
+
+	/*
+	 * After writing the RTC YY-MM-DD register, the
+	 * SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (!enabled)
+		sun6i_rtc_setaie(enabled, chip);
+
+	return 0;
+}
+
+static const struct rtc_class_ops sun6i_rtc_ops = {
+	.read_time		= sun6i_rtc_gettime,
+	.set_time		= sun6i_rtc_settime,
+	.read_alarm		= sun6i_rtc_getalarm,
+	.set_alarm		= sun6i_rtc_setalarm,
+	.alarm_irq_enable	= sun6i_rtc_alarm_irq_enable
+};
+
+static int sun6i_rtc_probe(struct platform_device *pdev)
+{
+	struct sun6i_rtc_dev *chip = sun6i_rtc;
+	int ret;
+
+	if (!chip)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, chip);
+	chip->dev = &pdev->dev;
+
+	chip->irq = platform_get_irq(pdev, 0);
+	if (chip->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return chip->irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
+			       0, dev_name(&pdev->dev), chip);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	/* clear the alarm counter value */
+	writel(0, chip->base + SUN6I_ALRM_COUNTER);
+
+	/* disable counter alarm */
+	writel(0, chip->base + SUN6I_ALRM_EN);
+
+	/* disable counter alarm interrupt */
+	writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
+
+	/* disable week alarm */
+	writel(0, chip->base + SUN6I_ALRM1_EN);
+
+	/* disable week alarm interrupt */
+	writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
+
+	/* clear counter alarm pending interrupts */
+	writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
+	       chip->base + SUN6I_ALRM_IRQ_STA);
+
+	/* clear week alarm pending interrupts */
+	writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND,
+	       chip->base + SUN6I_ALRM1_IRQ_STA);
+
+	/* disable alarm wakeup */
+	writel(0, chip->base + SUN6I_ALARM_CONFIG);
+
+	clk_prepare_enable(chip->losc);
+
+	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
+					     &sun6i_rtc_ops, THIS_MODULE);
+	if (IS_ERR(chip->rtc)) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		return PTR_ERR(chip->rtc);
+	}
+
+	dev_info(&pdev->dev, "RTC enabled\n");
+
+	return 0;
+}
+
+static const struct of_device_id sun6i_rtc_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-rtc" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
+
+static struct platform_driver sun6i_rtc_driver = {
+	.probe		= sun6i_rtc_probe,
+	.driver		= {
+		.name		= "sun6i-rtc",
+		.of_match_table = sun6i_rtc_dt_ids,
+	},
+};
+builtin_platform_driver(sun6i_rtc_driver);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sunxi.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sunxi.c
new file mode 100644
index 0000000..abada60
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sunxi.c
@@ -0,0 +1,518 @@
+/*
+ * An RTC driver for Allwinner A10/A20
+ *
+ * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+#define SUNXI_LOSC_CTRL				0x0000
+#define SUNXI_LOSC_CTRL_RTC_HMS_ACC		BIT(8)
+#define SUNXI_LOSC_CTRL_RTC_YMD_ACC		BIT(7)
+
+#define SUNXI_RTC_YMD				0x0004
+
+#define SUNXI_RTC_HMS				0x0008
+
+#define SUNXI_ALRM_DHMS				0x000c
+
+#define SUNXI_ALRM_EN				0x0014
+#define SUNXI_ALRM_EN_CNT_EN			BIT(8)
+
+#define SUNXI_ALRM_IRQ_EN			0x0018
+#define SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN		BIT(0)
+
+#define SUNXI_ALRM_IRQ_STA			0x001c
+#define SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND		BIT(0)
+
+#define SUNXI_MASK_DH				0x0000001f
+#define SUNXI_MASK_SM				0x0000003f
+#define SUNXI_MASK_M				0x0000000f
+#define SUNXI_MASK_LY				0x00000001
+#define SUNXI_MASK_D				0x00000ffe
+#define SUNXI_MASK_M				0x0000000f
+
+#define SUNXI_GET(x, mask, shift)		(((x) & ((mask) << (shift))) \
+							>> (shift))
+
+#define SUNXI_SET(x, mask, shift)		(((x) & (mask)) << (shift))
+
+/*
+ * Get date values
+ */
+#define SUNXI_DATE_GET_DAY_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_DH, 0)
+#define SUNXI_DATE_GET_MON_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_M, 8)
+#define SUNXI_DATE_GET_YEAR_VALUE(x, mask)	SUNXI_GET(x, mask, 16)
+
+/*
+ * Get time values
+ */
+#define SUNXI_TIME_GET_SEC_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_SM, 0)
+#define SUNXI_TIME_GET_MIN_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_TIME_GET_HOUR_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Get alarm values
+ */
+#define SUNXI_ALRM_GET_SEC_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_SM, 0)
+#define SUNXI_ALRM_GET_MIN_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_ALRM_GET_HOUR_VALUE(x)		SUNXI_GET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Set date values
+ */
+#define SUNXI_DATE_SET_DAY_VALUE(x)		SUNXI_DATE_GET_DAY_VALUE(x)
+#define SUNXI_DATE_SET_MON_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_M, 8)
+#define SUNXI_DATE_SET_YEAR_VALUE(x, mask)	SUNXI_SET(x, mask, 16)
+#define SUNXI_LEAP_SET_VALUE(x, shift)		SUNXI_SET(x, SUNXI_MASK_LY, shift)
+
+/*
+ * Set time values
+ */
+#define SUNXI_TIME_SET_SEC_VALUE(x)		SUNXI_TIME_GET_SEC_VALUE(x)
+#define SUNXI_TIME_SET_MIN_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_TIME_SET_HOUR_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Set alarm values
+ */
+#define SUNXI_ALRM_SET_SEC_VALUE(x)		SUNXI_ALRM_GET_SEC_VALUE(x)
+#define SUNXI_ALRM_SET_MIN_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_ALRM_SET_HOUR_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_DH, 16)
+#define SUNXI_ALRM_SET_DAY_VALUE(x)		SUNXI_SET(x, SUNXI_MASK_D, 21)
+
+/*
+ * Time unit conversions
+ */
+#define SEC_IN_MIN				60
+#define SEC_IN_HOUR				(60 * SEC_IN_MIN)
+#define SEC_IN_DAY				(24 * SEC_IN_HOUR)
+
+/*
+ * The year parameter passed to the driver is usually an offset relative to
+ * the year 1900. This macro is used to convert this offset to another one
+ * relative to the minimum year allowed by the hardware.
+ */
+#define SUNXI_YEAR_OFF(x)			((x)->min - 1900)
+
+/*
+ * min and max year are arbitrary set considering the limited range of the
+ * hardware register field
+ */
+struct sunxi_rtc_data_year {
+	unsigned int min;		/* min year allowed */
+	unsigned int max;		/* max year allowed */
+	unsigned int mask;		/* mask for the year field */
+	unsigned char leap_shift;	/* bit shift to get the leap year */
+};
+
+static const struct sunxi_rtc_data_year data_year_param[] = {
+	[0] = {
+		.min		= 2010,
+		.max		= 2073,
+		.mask		= 0x3f,
+		.leap_shift	= 22,
+	},
+	[1] = {
+		.min		= 1970,
+		.max		= 2225,
+		.mask		= 0xff,
+		.leap_shift	= 24,
+	},
+};
+
+struct sunxi_rtc_dev {
+	struct rtc_device *rtc;
+	struct device *dev;
+	const struct sunxi_rtc_data_year *data_year;
+	void __iomem *base;
+	int irq;
+};
+
+static irqreturn_t sunxi_rtc_alarmirq(int irq, void *id)
+{
+	struct sunxi_rtc_dev *chip = (struct sunxi_rtc_dev *) id;
+	u32 val;
+
+	val = readl(chip->base + SUNXI_ALRM_IRQ_STA);
+
+	if (val & SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND) {
+		val |= SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND;
+		writel(val, chip->base + SUNXI_ALRM_IRQ_STA);
+
+		rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void sunxi_rtc_setaie(unsigned int to, struct sunxi_rtc_dev *chip)
+{
+	u32 alrm_val = 0;
+	u32 alrm_irq_val = 0;
+
+	if (to) {
+		alrm_val = readl(chip->base + SUNXI_ALRM_EN);
+		alrm_val |= SUNXI_ALRM_EN_CNT_EN;
+
+		alrm_irq_val = readl(chip->base + SUNXI_ALRM_IRQ_EN);
+		alrm_irq_val |= SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN;
+	} else {
+		writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND,
+				chip->base + SUNXI_ALRM_IRQ_STA);
+	}
+
+	writel(alrm_val, chip->base + SUNXI_ALRM_EN);
+	writel(alrm_irq_val, chip->base + SUNXI_ALRM_IRQ_EN);
+}
+
+static int sunxi_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+	struct rtc_time *alrm_tm = &wkalrm->time;
+	u32 alrm;
+	u32 alrm_en;
+	u32 date;
+
+	alrm = readl(chip->base + SUNXI_ALRM_DHMS);
+	date = readl(chip->base + SUNXI_RTC_YMD);
+
+	alrm_tm->tm_sec = SUNXI_ALRM_GET_SEC_VALUE(alrm);
+	alrm_tm->tm_min = SUNXI_ALRM_GET_MIN_VALUE(alrm);
+	alrm_tm->tm_hour = SUNXI_ALRM_GET_HOUR_VALUE(alrm);
+
+	alrm_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
+	alrm_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date);
+	alrm_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
+			chip->data_year->mask);
+
+	alrm_tm->tm_mon -= 1;
+
+	/*
+	 * switch from (data_year->min)-relative offset to
+	 * a (1900)-relative one
+	 */
+	alrm_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year);
+
+	alrm_en = readl(chip->base + SUNXI_ALRM_IRQ_EN);
+	if (alrm_en & SUNXI_ALRM_EN_CNT_EN)
+		wkalrm->enabled = 1;
+
+	return 0;
+}
+
+static int sunxi_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date, time;
+
+	/*
+	 * read again in case it changes
+	 */
+	do {
+		date = readl(chip->base + SUNXI_RTC_YMD);
+		time = readl(chip->base + SUNXI_RTC_HMS);
+	} while ((date != readl(chip->base + SUNXI_RTC_YMD)) ||
+		 (time != readl(chip->base + SUNXI_RTC_HMS)));
+
+	rtc_tm->tm_sec  = SUNXI_TIME_GET_SEC_VALUE(time);
+	rtc_tm->tm_min  = SUNXI_TIME_GET_MIN_VALUE(time);
+	rtc_tm->tm_hour = SUNXI_TIME_GET_HOUR_VALUE(time);
+
+	rtc_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
+	rtc_tm->tm_mon  = SUNXI_DATE_GET_MON_VALUE(date);
+	rtc_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
+					chip->data_year->mask);
+
+	rtc_tm->tm_mon  -= 1;
+
+	/*
+	 * switch from (data_year->min)-relative offset to
+	 * a (1900)-relative one
+	 */
+	rtc_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year);
+
+	return rtc_valid_tm(rtc_tm);
+}
+
+static int sunxi_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+	struct rtc_time *alrm_tm = &wkalrm->time;
+	struct rtc_time tm_now;
+	u32 alrm;
+	time64_t diff;
+	unsigned long time_gap;
+	unsigned long time_gap_day;
+	unsigned long time_gap_hour;
+	unsigned long time_gap_min;
+	int ret;
+
+	ret = sunxi_rtc_gettime(dev, &tm_now);
+	if (ret < 0) {
+		dev_err(dev, "Error in getting time\n");
+		return -EINVAL;
+	}
+
+	diff = rtc_tm_sub(alrm_tm, &tm_now);
+	if (diff <= 0) {
+		dev_err(dev, "Date to set in the past\n");
+		return -EINVAL;
+	}
+
+	if (diff > 255 * SEC_IN_DAY) {
+		dev_err(dev, "Day must be in the range 0 - 255\n");
+		return -EINVAL;
+	}
+
+	time_gap = diff;
+	time_gap_day = time_gap / SEC_IN_DAY;
+	time_gap -= time_gap_day * SEC_IN_DAY;
+	time_gap_hour = time_gap / SEC_IN_HOUR;
+	time_gap -= time_gap_hour * SEC_IN_HOUR;
+	time_gap_min = time_gap / SEC_IN_MIN;
+	time_gap -= time_gap_min * SEC_IN_MIN;
+
+	sunxi_rtc_setaie(0, chip);
+	writel(0, chip->base + SUNXI_ALRM_DHMS);
+	usleep_range(100, 300);
+
+	alrm = SUNXI_ALRM_SET_SEC_VALUE(time_gap) |
+		SUNXI_ALRM_SET_MIN_VALUE(time_gap_min) |
+		SUNXI_ALRM_SET_HOUR_VALUE(time_gap_hour) |
+		SUNXI_ALRM_SET_DAY_VALUE(time_gap_day);
+	writel(alrm, chip->base + SUNXI_ALRM_DHMS);
+
+	writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
+	writel(SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN, chip->base + SUNXI_ALRM_IRQ_EN);
+
+	sunxi_rtc_setaie(wkalrm->enabled, chip);
+
+	return 0;
+}
+
+static int sunxi_rtc_wait(struct sunxi_rtc_dev *chip, int offset,
+			  unsigned int mask, unsigned int ms_timeout)
+{
+	const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
+	u32 reg;
+
+	do {
+		reg = readl(chip->base + offset);
+		reg &= mask;
+
+		if (reg == mask)
+			return 0;
+
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int sunxi_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date = 0;
+	u32 time = 0;
+	unsigned int year;
+
+	/*
+	 * the input rtc_tm->tm_year is the offset relative to 1900. We use
+	 * the SUNXI_YEAR_OFF macro to rebase it with respect to the min year
+	 * allowed by the hardware
+	 */
+
+	year = rtc_tm->tm_year + 1900;
+	if (year < chip->data_year->min || year > chip->data_year->max) {
+		dev_err(dev, "rtc only supports year in range %u - %u\n",
+			chip->data_year->min, chip->data_year->max);
+		return -EINVAL;
+	}
+
+	rtc_tm->tm_year -= SUNXI_YEAR_OFF(chip->data_year);
+	rtc_tm->tm_mon += 1;
+
+	date = SUNXI_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+		SUNXI_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
+		SUNXI_DATE_SET_YEAR_VALUE(rtc_tm->tm_year,
+				chip->data_year->mask);
+
+	if (is_leap_year(year))
+		date |= SUNXI_LEAP_SET_VALUE(1, chip->data_year->leap_shift);
+
+	time = SUNXI_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
+		SUNXI_TIME_SET_MIN_VALUE(rtc_tm->tm_min)  |
+		SUNXI_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
+
+	writel(0, chip->base + SUNXI_RTC_HMS);
+	writel(0, chip->base + SUNXI_RTC_YMD);
+
+	writel(time, chip->base + SUNXI_RTC_HMS);
+
+	/*
+	 * After writing the RTC HH-MM-SS register, the
+	 * SUNXI_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL,
+				SUNXI_LOSC_CTRL_RTC_HMS_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -1;
+	}
+
+	writel(date, chip->base + SUNXI_RTC_YMD);
+
+	/*
+	 * After writing the RTC YY-MM-DD register, the
+	 * SUNXI_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL,
+				SUNXI_LOSC_CTRL_RTC_YMD_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int sunxi_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (!enabled)
+		sunxi_rtc_setaie(enabled, chip);
+
+	return 0;
+}
+
+static const struct rtc_class_ops sunxi_rtc_ops = {
+	.read_time		= sunxi_rtc_gettime,
+	.set_time		= sunxi_rtc_settime,
+	.read_alarm		= sunxi_rtc_getalarm,
+	.set_alarm		= sunxi_rtc_setalarm,
+	.alarm_irq_enable	= sunxi_rtc_alarm_irq_enable
+};
+
+static const struct of_device_id sunxi_rtc_dt_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-rtc", .data = &data_year_param[0] },
+	{ .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids);
+
+static int sunxi_rtc_probe(struct platform_device *pdev)
+{
+	struct sunxi_rtc_dev *chip;
+	struct resource *res;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chip);
+	chip->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	chip->irq = platform_get_irq(pdev, 0);
+	if (chip->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return chip->irq;
+	}
+	ret = devm_request_irq(&pdev->dev, chip->irq, sunxi_rtc_alarmirq,
+			0, dev_name(&pdev->dev), chip);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	chip->data_year = of_device_get_match_data(&pdev->dev);
+	if (!chip->data_year) {
+		dev_err(&pdev->dev, "Unable to setup RTC data\n");
+		return -ENODEV;
+	}
+
+	/* clear the alarm count value */
+	writel(0, chip->base + SUNXI_ALRM_DHMS);
+
+	/* disable alarm, not generate irq pending */
+	writel(0, chip->base + SUNXI_ALRM_EN);
+
+	/* disable alarm week/cnt irq, unset to cpu */
+	writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
+
+	/* clear alarm week/cnt irq pending */
+	writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base +
+			SUNXI_ALRM_IRQ_STA);
+
+	chip->rtc = rtc_device_register("rtc-sunxi", &pdev->dev,
+			&sunxi_rtc_ops, THIS_MODULE);
+	if (IS_ERR(chip->rtc)) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		return PTR_ERR(chip->rtc);
+	}
+
+	dev_info(&pdev->dev, "RTC enabled\n");
+
+	return 0;
+}
+
+static int sunxi_rtc_remove(struct platform_device *pdev)
+{
+	struct sunxi_rtc_dev *chip = platform_get_drvdata(pdev);
+
+	rtc_device_unregister(chip->rtc);
+
+	return 0;
+}
+
+static struct platform_driver sunxi_rtc_driver = {
+	.probe		= sunxi_rtc_probe,
+	.remove		= sunxi_rtc_remove,
+	.driver		= {
+		.name		= "sunxi-rtc",
+		.of_match_table = sunxi_rtc_dt_ids,
+	},
+};
+
+module_platform_driver(sunxi_rtc_driver);
+
+MODULE_DESCRIPTION("sunxi RTC driver");
+MODULE_AUTHOR("Carlo Caione <carlo.caione@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-sysfs.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-sysfs.c
new file mode 100644
index 0000000..e364550
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-sysfs.c
@@ -0,0 +1,306 @@
+/*
+ * RTC subsystem, sysfs interface
+ *
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+#include "rtc-core.h"
+
+
+/* device attributes */
+
+/*
+ * NOTE:  RTC times displayed in sysfs use the RTC's timezone.  That's
+ * ideally UTC.  However, PCs that also boot to MS-Windows normally use
+ * the local time and change to match daylight savings time.  That affects
+ * attributes including date, time, since_epoch, and wakealarm.
+ */
+
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s %s\n", dev_driver_string(dev->parent),
+		       dev_name(dev->parent));
+}
+static DEVICE_ATTR_RO(name);
+
+static ssize_t
+date_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct rtc_time tm;
+
+	retval = rtc_read_time(to_rtc_device(dev), &tm);
+	if (retval == 0) {
+		retval = sprintf(buf, "%04d-%02d-%02d\n",
+			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
+	}
+
+	return retval;
+}
+static DEVICE_ATTR_RO(date);
+
+static ssize_t
+time_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct rtc_time tm;
+
+	retval = rtc_read_time(to_rtc_device(dev), &tm);
+	if (retval == 0) {
+		retval = sprintf(buf, "%02d:%02d:%02d\n",
+			tm.tm_hour, tm.tm_min, tm.tm_sec);
+	}
+
+	return retval;
+}
+static DEVICE_ATTR_RO(time);
+
+static ssize_t
+since_epoch_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct rtc_time tm;
+
+	retval = rtc_read_time(to_rtc_device(dev), &tm);
+	if (retval == 0) {
+		unsigned long time;
+		rtc_tm_to_time(&tm, &time);
+		retval = sprintf(buf, "%lu\n", time);
+	}
+
+	return retval;
+}
+static DEVICE_ATTR_RO(since_epoch);
+
+static ssize_t
+max_user_freq_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", to_rtc_device(dev)->max_user_freq);
+}
+
+static ssize_t
+max_user_freq_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct rtc_device *rtc = to_rtc_device(dev);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
+
+	if (val >= 4096 || val == 0)
+		return -EINVAL;
+
+	rtc->max_user_freq = (int)val;
+
+	return n;
+}
+static DEVICE_ATTR_RW(max_user_freq);
+
+/**
+ * rtc_sysfs_show_hctosys - indicate if the given RTC set the system time
+ *
+ * Returns 1 if the system clock was set by this RTC at the last
+ * boot or resume event.
+ */
+static ssize_t
+hctosys_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+#ifdef CONFIG_RTC_HCTOSYS_DEVICE
+	if (rtc_hctosys_ret == 0 &&
+			strcmp(dev_name(&to_rtc_device(dev)->dev),
+				CONFIG_RTC_HCTOSYS_DEVICE) == 0)
+		return sprintf(buf, "1\n");
+	else
+#endif
+		return sprintf(buf, "0\n");
+}
+static DEVICE_ATTR_RO(hctosys);
+
+static ssize_t
+wakealarm_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	unsigned long alarm;
+	struct rtc_wkalrm alm;
+
+	/* Don't show disabled alarms.  For uniformity, RTC alarms are
+	 * conceptually one-shot, even though some common RTCs (on PCs)
+	 * don't actually work that way.
+	 *
+	 * NOTE: RTC implementations where the alarm doesn't match an
+	 * exact YYYY-MM-DD HH:MM[:SS] date *must* disable their RTC
+	 * alarms after they trigger, to ensure one-shot semantics.
+	 */
+	retval = rtc_read_alarm(to_rtc_device(dev), &alm);
+	if (retval == 0 && alm.enabled) {
+		rtc_tm_to_time(&alm.time, &alarm);
+		retval = sprintf(buf, "%lu\n", alarm);
+	}
+
+	return retval;
+}
+
+static ssize_t
+wakealarm_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	ssize_t retval;
+	unsigned long now, alarm;
+	unsigned long push = 0;
+	struct rtc_wkalrm alm;
+	struct rtc_device *rtc = to_rtc_device(dev);
+	const char *buf_ptr;
+	int adjust = 0;
+
+	/* Only request alarms that trigger in the future.  Disable them
+	 * by writing another time, e.g. 0 meaning Jan 1 1970 UTC.
+	 */
+	retval = rtc_read_time(rtc, &alm.time);
+	if (retval < 0)
+		return retval;
+	rtc_tm_to_time(&alm.time, &now);
+
+	buf_ptr = buf;
+	if (*buf_ptr == '+') {
+		buf_ptr++;
+		if (*buf_ptr == '=') {
+			buf_ptr++;
+			push = 1;
+		} else
+			adjust = 1;
+	}
+	retval = kstrtoul(buf_ptr, 0, &alarm);
+	if (retval)
+		return retval;
+	if (adjust) {
+		alarm += now;
+	}
+	if (alarm > now || push) {
+		/* Avoid accidentally clobbering active alarms; we can't
+		 * entirely prevent that here, without even the minimal
+		 * locking from the /dev/rtcN api.
+		 */
+		retval = rtc_read_alarm(rtc, &alm);
+		if (retval < 0)
+			return retval;
+		if (alm.enabled) {
+			if (push) {
+				rtc_tm_to_time(&alm.time, &push);
+				alarm += push;
+			} else
+				return -EBUSY;
+		} else if (push)
+			return -EINVAL;
+		alm.enabled = 1;
+	} else {
+		alm.enabled = 0;
+
+		/* Provide a valid future alarm time.  Linux isn't EFI,
+		 * this time won't be ignored when disabling the alarm.
+		 */
+		alarm = now + 300;
+	}
+	rtc_time_to_tm(alarm, &alm.time);
+
+	retval = rtc_set_alarm(rtc, &alm);
+	return (retval < 0) ? retval : n;
+}
+static DEVICE_ATTR_RW(wakealarm);
+
+static ssize_t
+offset_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	long offset;
+
+	retval = rtc_read_offset(to_rtc_device(dev), &offset);
+	if (retval == 0)
+		retval = sprintf(buf, "%ld\n", offset);
+
+	return retval;
+}
+
+static ssize_t
+offset_store(struct device *dev, struct device_attribute *attr,
+	     const char *buf, size_t n)
+{
+	ssize_t retval;
+	long offset;
+
+	retval = kstrtol(buf, 10, &offset);
+	if (retval == 0)
+		retval = rtc_set_offset(to_rtc_device(dev), offset);
+
+	return (retval < 0) ? retval : n;
+}
+static DEVICE_ATTR_RW(offset);
+
+static struct attribute *rtc_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_date.attr,
+	&dev_attr_time.attr,
+	&dev_attr_since_epoch.attr,
+	&dev_attr_max_user_freq.attr,
+	&dev_attr_hctosys.attr,
+	&dev_attr_wakealarm.attr,
+	&dev_attr_offset.attr,
+	NULL,
+};
+
+/* The reason to trigger an alarm with no process watching it (via sysfs)
+ * is its side effect:  waking from a system state like suspend-to-RAM or
+ * suspend-to-disk.  So: no attribute unless that side effect is possible.
+ * (Userspace may disable that mechanism later.)
+ */
+static bool rtc_does_wakealarm(struct rtc_device *rtc)
+{
+	if (!device_can_wakeup(rtc->dev.parent))
+		return false;
+
+	return rtc->ops->set_alarm != NULL;
+}
+
+static umode_t rtc_attr_is_visible(struct kobject *kobj,
+				   struct attribute *attr, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct rtc_device *rtc = to_rtc_device(dev);
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_wakealarm.attr) {
+		if (!rtc_does_wakealarm(rtc))
+			mode = 0;
+	} else if (attr == &dev_attr_offset.attr) {
+		if (!rtc->ops->set_offset)
+			mode = 0;
+	}
+
+	return mode;
+}
+
+static struct attribute_group rtc_attr_group = {
+	.is_visible	= rtc_attr_is_visible,
+	.attrs		= rtc_attrs,
+};
+
+static const struct attribute_group *rtc_attr_groups[] = {
+	&rtc_attr_group,
+	NULL
+};
+
+const struct attribute_group **rtc_get_dev_attribute_groups(void)
+{
+	return rtc_attr_groups;
+}
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tegra.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tegra.c
new file mode 100644
index 0000000..d30d57b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tegra.c
@@ -0,0 +1,453 @@
+/*
+ * An RTC driver for the NVIDIA Tegra 200 series internal RTC.
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+/* set to 1 = busy every eight 32kHz clocks during copy of sec+msec to AHB */
+#define TEGRA_RTC_REG_BUSY			0x004
+#define TEGRA_RTC_REG_SECONDS			0x008
+/* when msec is read, the seconds are buffered into shadow seconds. */
+#define TEGRA_RTC_REG_SHADOW_SECONDS		0x00c
+#define TEGRA_RTC_REG_MILLI_SECONDS		0x010
+#define TEGRA_RTC_REG_SECONDS_ALARM0		0x014
+#define TEGRA_RTC_REG_SECONDS_ALARM1		0x018
+#define TEGRA_RTC_REG_MILLI_SECONDS_ALARM0	0x01c
+#define TEGRA_RTC_REG_INTR_MASK			0x028
+/* write 1 bits to clear status bits */
+#define TEGRA_RTC_REG_INTR_STATUS		0x02c
+
+/* bits in INTR_MASK */
+#define TEGRA_RTC_INTR_MASK_MSEC_CDN_ALARM	(1<<4)
+#define TEGRA_RTC_INTR_MASK_SEC_CDN_ALARM	(1<<3)
+#define TEGRA_RTC_INTR_MASK_MSEC_ALARM		(1<<2)
+#define TEGRA_RTC_INTR_MASK_SEC_ALARM1		(1<<1)
+#define TEGRA_RTC_INTR_MASK_SEC_ALARM0		(1<<0)
+
+/* bits in INTR_STATUS */
+#define TEGRA_RTC_INTR_STATUS_MSEC_CDN_ALARM	(1<<4)
+#define TEGRA_RTC_INTR_STATUS_SEC_CDN_ALARM	(1<<3)
+#define TEGRA_RTC_INTR_STATUS_MSEC_ALARM	(1<<2)
+#define TEGRA_RTC_INTR_STATUS_SEC_ALARM1	(1<<1)
+#define TEGRA_RTC_INTR_STATUS_SEC_ALARM0	(1<<0)
+
+struct tegra_rtc_info {
+	struct platform_device	*pdev;
+	struct rtc_device	*rtc_dev;
+	void __iomem		*rtc_base; /* NULL if not initialized. */
+	struct clk		*clk;
+	int			tegra_rtc_irq; /* alarm and periodic irq */
+	spinlock_t		tegra_rtc_lock;
+};
+
+/* RTC hardware is busy when it is updating its values over AHB once
+ * every eight 32kHz clocks (~250uS).
+ * outside of these updates the CPU is free to write.
+ * CPU is always free to read.
+ */
+static inline u32 tegra_rtc_check_busy(struct tegra_rtc_info *info)
+{
+	return readl(info->rtc_base + TEGRA_RTC_REG_BUSY) & 1;
+}
+
+/* Wait for hardware to be ready for writing.
+ * This function tries to maximize the amount of time before the next update.
+ * It does this by waiting for the RTC to become busy with its periodic update,
+ * then returning once the RTC first becomes not busy.
+ * This periodic update (where the seconds and milliseconds are copied to the
+ * AHB side) occurs every eight 32kHz clocks (~250uS).
+ * The behavior of this function allows us to make some assumptions without
+ * introducing a race, because 250uS is plenty of time to read/write a value.
+ */
+static int tegra_rtc_wait_while_busy(struct device *dev)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+
+	int retries = 500; /* ~490 us is the worst case, ~250 us is best. */
+
+	/* first wait for the RTC to become busy. this is when it
+	 * posts its updated seconds+msec registers to AHB side. */
+	while (tegra_rtc_check_busy(info)) {
+		if (!retries--)
+			goto retry_failed;
+		udelay(1);
+	}
+
+	/* now we have about 250 us to manipulate registers */
+	return 0;
+
+retry_failed:
+	dev_err(dev, "write failed:retry count exceeded.\n");
+	return -ETIMEDOUT;
+}
+
+static int tegra_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned long sec, msec;
+	unsigned long sl_irq_flags;
+
+	/* RTC hardware copies seconds to shadow seconds when a read
+	 * of milliseconds occurs. use a lock to keep other threads out. */
+	spin_lock_irqsave(&info->tegra_rtc_lock, sl_irq_flags);
+
+	msec = readl(info->rtc_base + TEGRA_RTC_REG_MILLI_SECONDS);
+	sec = readl(info->rtc_base + TEGRA_RTC_REG_SHADOW_SECONDS);
+
+	spin_unlock_irqrestore(&info->tegra_rtc_lock, sl_irq_flags);
+
+	rtc_time_to_tm(sec, tm);
+
+	dev_vdbg(dev, "time read as %lu. %d/%d/%d %d:%02u:%02u\n",
+		sec,
+		tm->tm_mon + 1,
+		tm->tm_mday,
+		tm->tm_year + 1900,
+		tm->tm_hour,
+		tm->tm_min,
+		tm->tm_sec
+	);
+
+	return 0;
+}
+
+static int tegra_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned long sec;
+	int ret;
+
+	/* convert tm to seconds. */
+	ret = rtc_valid_tm(tm);
+	if (ret)
+		return ret;
+
+	rtc_tm_to_time(tm, &sec);
+
+	dev_vdbg(dev, "time set to %lu. %d/%d/%d %d:%02u:%02u\n",
+		sec,
+		tm->tm_mon+1,
+		tm->tm_mday,
+		tm->tm_year+1900,
+		tm->tm_hour,
+		tm->tm_min,
+		tm->tm_sec
+	);
+
+	/* seconds only written if wait succeeded. */
+	ret = tegra_rtc_wait_while_busy(dev);
+	if (!ret)
+		writel(sec, info->rtc_base + TEGRA_RTC_REG_SECONDS);
+
+	dev_vdbg(dev, "time read back as %d\n",
+		readl(info->rtc_base + TEGRA_RTC_REG_SECONDS));
+
+	return ret;
+}
+
+static int tegra_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned long sec;
+	unsigned tmp;
+
+	sec = readl(info->rtc_base + TEGRA_RTC_REG_SECONDS_ALARM0);
+
+	if (sec == 0) {
+		/* alarm is disabled. */
+		alarm->enabled = 0;
+	} else {
+		/* alarm is enabled. */
+		alarm->enabled = 1;
+		rtc_time_to_tm(sec, &alarm->time);
+	}
+
+	tmp = readl(info->rtc_base + TEGRA_RTC_REG_INTR_STATUS);
+	alarm->pending = (tmp & TEGRA_RTC_INTR_STATUS_SEC_ALARM0) != 0;
+
+	return 0;
+}
+
+static int tegra_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned status;
+	unsigned long sl_irq_flags;
+
+	tegra_rtc_wait_while_busy(dev);
+	spin_lock_irqsave(&info->tegra_rtc_lock, sl_irq_flags);
+
+	/* read the original value, and OR in the flag. */
+	status = readl(info->rtc_base + TEGRA_RTC_REG_INTR_MASK);
+	if (enabled)
+		status |= TEGRA_RTC_INTR_MASK_SEC_ALARM0; /* set it */
+	else
+		status &= ~TEGRA_RTC_INTR_MASK_SEC_ALARM0; /* clear it */
+
+	writel(status, info->rtc_base + TEGRA_RTC_REG_INTR_MASK);
+
+	spin_unlock_irqrestore(&info->tegra_rtc_lock, sl_irq_flags);
+
+	return 0;
+}
+
+static int tegra_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned long sec;
+
+	if (alarm->enabled)
+		rtc_tm_to_time(&alarm->time, &sec);
+	else
+		sec = 0;
+
+	tegra_rtc_wait_while_busy(dev);
+	writel(sec, info->rtc_base + TEGRA_RTC_REG_SECONDS_ALARM0);
+	dev_vdbg(dev, "alarm read back as %d\n",
+		readl(info->rtc_base + TEGRA_RTC_REG_SECONDS_ALARM0));
+
+	/* if successfully written and alarm is enabled ... */
+	if (sec) {
+		tegra_rtc_alarm_irq_enable(dev, 1);
+
+		dev_vdbg(dev, "alarm set as %lu. %d/%d/%d %d:%02u:%02u\n",
+			sec,
+			alarm->time.tm_mon+1,
+			alarm->time.tm_mday,
+			alarm->time.tm_year+1900,
+			alarm->time.tm_hour,
+			alarm->time.tm_min,
+			alarm->time.tm_sec);
+	} else {
+		/* disable alarm if 0 or write error. */
+		dev_vdbg(dev, "alarm disabled\n");
+		tegra_rtc_alarm_irq_enable(dev, 0);
+	}
+
+	return 0;
+}
+
+static int tegra_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	if (!dev || !dev->driver)
+		return 0;
+
+	seq_printf(seq, "name\t\t: %s\n", dev_name(dev));
+
+	return 0;
+}
+
+static irqreturn_t tegra_rtc_irq_handler(int irq, void *data)
+{
+	struct device *dev = data;
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+	unsigned long events = 0;
+	unsigned status;
+	unsigned long sl_irq_flags;
+
+	status = readl(info->rtc_base + TEGRA_RTC_REG_INTR_STATUS);
+	if (status) {
+		/* clear the interrupt masks and status on any irq. */
+		tegra_rtc_wait_while_busy(dev);
+		spin_lock_irqsave(&info->tegra_rtc_lock, sl_irq_flags);
+		writel(0, info->rtc_base + TEGRA_RTC_REG_INTR_MASK);
+		writel(status, info->rtc_base + TEGRA_RTC_REG_INTR_STATUS);
+		spin_unlock_irqrestore(&info->tegra_rtc_lock, sl_irq_flags);
+	}
+
+	/* check if Alarm */
+	if ((status & TEGRA_RTC_INTR_STATUS_SEC_ALARM0))
+		events |= RTC_IRQF | RTC_AF;
+
+	/* check if Periodic */
+	if ((status & TEGRA_RTC_INTR_STATUS_SEC_CDN_ALARM))
+		events |= RTC_IRQF | RTC_PF;
+
+	rtc_update_irq(info->rtc_dev, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops tegra_rtc_ops = {
+	.read_time	= tegra_rtc_read_time,
+	.set_time	= tegra_rtc_set_time,
+	.read_alarm	= tegra_rtc_read_alarm,
+	.set_alarm	= tegra_rtc_set_alarm,
+	.proc		= tegra_rtc_proc,
+	.alarm_irq_enable = tegra_rtc_alarm_irq_enable,
+};
+
+static const struct of_device_id tegra_rtc_dt_match[] = {
+	{ .compatible = "nvidia,tegra20-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, tegra_rtc_dt_match);
+
+static int __init tegra_rtc_probe(struct platform_device *pdev)
+{
+	struct tegra_rtc_info *info;
+	struct resource *res;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct tegra_rtc_info),
+		GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->rtc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->rtc_base))
+		return PTR_ERR(info->rtc_base);
+
+	info->tegra_rtc_irq = platform_get_irq(pdev, 0);
+	if (info->tegra_rtc_irq <= 0)
+		return -EBUSY;
+
+	info->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->clk))
+		return PTR_ERR(info->clk);
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret < 0)
+		return ret;
+
+	/* set context info. */
+	info->pdev = pdev;
+	spin_lock_init(&info->tegra_rtc_lock);
+
+	platform_set_drvdata(pdev, info);
+
+	/* clear out the hardware. */
+	writel(0, info->rtc_base + TEGRA_RTC_REG_SECONDS_ALARM0);
+	writel(0xffffffff, info->rtc_base + TEGRA_RTC_REG_INTR_STATUS);
+	writel(0, info->rtc_base + TEGRA_RTC_REG_INTR_MASK);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = devm_rtc_device_register(&pdev->dev,
+				dev_name(&pdev->dev), &tegra_rtc_ops,
+				THIS_MODULE);
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Unable to register device (err=%d).\n",
+			ret);
+		goto disable_clk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, info->tegra_rtc_irq,
+			tegra_rtc_irq_handler, IRQF_TRIGGER_HIGH,
+			dev_name(&pdev->dev), &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Unable to request interrupt for device (err=%d).\n",
+			ret);
+		goto disable_clk;
+	}
+
+	dev_notice(&pdev->dev, "Tegra internal Real Time Clock\n");
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(info->clk);
+	return ret;
+}
+
+static int tegra_rtc_remove(struct platform_device *pdev)
+{
+	struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(info->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_rtc_suspend(struct device *dev)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+
+	tegra_rtc_wait_while_busy(dev);
+
+	/* only use ALARM0 as a wake source. */
+	writel(0xffffffff, info->rtc_base + TEGRA_RTC_REG_INTR_STATUS);
+	writel(TEGRA_RTC_INTR_STATUS_SEC_ALARM0,
+		info->rtc_base + TEGRA_RTC_REG_INTR_MASK);
+
+	dev_vdbg(dev, "alarm sec = %d\n",
+		readl(info->rtc_base + TEGRA_RTC_REG_SECONDS_ALARM0));
+
+	dev_vdbg(dev, "Suspend (device_may_wakeup=%d) irq:%d\n",
+		device_may_wakeup(dev), info->tegra_rtc_irq);
+
+	/* leave the alarms on as a wake source. */
+	if (device_may_wakeup(dev))
+		enable_irq_wake(info->tegra_rtc_irq);
+
+	return 0;
+}
+
+static int tegra_rtc_resume(struct device *dev)
+{
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
+
+	dev_vdbg(dev, "Resume (device_may_wakeup=%d)\n",
+		device_may_wakeup(dev));
+	/* alarms were left on as a wake source, turn them off. */
+	if (device_may_wakeup(dev))
+		disable_irq_wake(info->tegra_rtc_irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tegra_rtc_pm_ops, tegra_rtc_suspend, tegra_rtc_resume);
+
+static void tegra_rtc_shutdown(struct platform_device *pdev)
+{
+	dev_vdbg(&pdev->dev, "disabling interrupts.\n");
+	tegra_rtc_alarm_irq_enable(&pdev->dev, 0);
+}
+
+MODULE_ALIAS("platform:tegra_rtc");
+static struct platform_driver tegra_rtc_driver = {
+	.remove		= tegra_rtc_remove,
+	.shutdown	= tegra_rtc_shutdown,
+	.driver		= {
+		.name	= "tegra_rtc",
+		.of_match_table = tegra_rtc_dt_match,
+		.pm	= &tegra_rtc_pm_ops,
+	},
+};
+
+module_platform_driver_probe(tegra_rtc_driver, tegra_rtc_probe);
+
+MODULE_AUTHOR("Jon Mayo <jmayo@nvidia.com>");
+MODULE_DESCRIPTION("driver for Tegra internal RTC");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-test.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-test.c
new file mode 100644
index 0000000..3a2da4c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-test.c
@@ -0,0 +1,201 @@
+/*
+ * An RTC test device/driver
+ * Copyright (C) 2005 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+static int test_mmss64;
+module_param(test_mmss64, int, 0644);
+MODULE_PARM_DESC(test_mmss64, "Test struct rtc_class_ops.set_mmss64().");
+
+static struct platform_device *test0 = NULL, *test1 = NULL;
+
+static int test_rtc_read_alarm(struct device *dev,
+	struct rtc_wkalrm *alrm)
+{
+	return 0;
+}
+
+static int test_rtc_set_alarm(struct device *dev,
+	struct rtc_wkalrm *alrm)
+{
+	return 0;
+}
+
+static int test_rtc_read_time(struct device *dev,
+	struct rtc_time *tm)
+{
+	rtc_time64_to_tm(ktime_get_real_seconds(), tm);
+	return 0;
+}
+
+static int test_rtc_set_mmss64(struct device *dev, time64_t secs)
+{
+	dev_info(dev, "%s, secs = %lld\n", __func__, (long long)secs);
+	return 0;
+}
+
+static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	dev_info(dev, "%s, secs = %lu\n", __func__, secs);
+	return 0;
+}
+
+static int test_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct platform_device *plat_dev = to_platform_device(dev);
+
+	seq_printf(seq, "test\t\t: yes\n");
+	seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
+
+	return 0;
+}
+
+static int test_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	return 0;
+}
+
+static struct rtc_class_ops test_rtc_ops = {
+	.proc = test_rtc_proc,
+	.read_time = test_rtc_read_time,
+	.read_alarm = test_rtc_read_alarm,
+	.set_alarm = test_rtc_set_alarm,
+	.set_mmss = test_rtc_set_mmss,
+	.alarm_irq_enable = test_rtc_alarm_irq_enable,
+};
+
+static ssize_t test_irq_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", 42);
+}
+static ssize_t test_irq_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int retval;
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
+
+	retval = count;
+	if (strncmp(buf, "tick", 4) == 0 && rtc->pie_enabled)
+		rtc_update_irq(rtc, 1, RTC_PF | RTC_IRQF);
+	else if (strncmp(buf, "alarm", 5) == 0) {
+		struct rtc_wkalrm alrm;
+		int err = rtc_read_alarm(rtc, &alrm);
+
+		if (!err && alrm.enabled)
+			rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+
+	} else if (strncmp(buf, "update", 6) == 0 && rtc->uie_rtctimer.enabled)
+		rtc_update_irq(rtc, 1, RTC_UF | RTC_IRQF);
+	else
+		retval = -EINVAL;
+
+	return retval;
+}
+static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
+
+static int test_probe(struct platform_device *plat_dev)
+{
+	int err;
+	struct rtc_device *rtc;
+
+	if (test_mmss64) {
+		test_rtc_ops.set_mmss64 = test_rtc_set_mmss64;
+		test_rtc_ops.set_mmss = NULL;
+	}
+
+	rtc = devm_rtc_device_register(&plat_dev->dev, "test",
+				&test_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		return PTR_ERR(rtc);
+	}
+
+	err = device_create_file(&plat_dev->dev, &dev_attr_irq);
+	if (err)
+		dev_err(&plat_dev->dev, "Unable to create sysfs entry: %s\n",
+			dev_attr_irq.attr.name);
+
+	platform_set_drvdata(plat_dev, rtc);
+
+	return 0;
+}
+
+static int test_remove(struct platform_device *plat_dev)
+{
+	device_remove_file(&plat_dev->dev, &dev_attr_irq);
+
+	return 0;
+}
+
+static struct platform_driver test_driver = {
+	.probe	= test_probe,
+	.remove = test_remove,
+	.driver = {
+		.name = "rtc-test",
+	},
+};
+
+static int __init test_init(void)
+{
+	int err;
+
+	if ((err = platform_driver_register(&test_driver)))
+		return err;
+
+	if ((test0 = platform_device_alloc("rtc-test", 0)) == NULL) {
+		err = -ENOMEM;
+		goto exit_driver_unregister;
+	}
+
+	if ((test1 = platform_device_alloc("rtc-test", 1)) == NULL) {
+		err = -ENOMEM;
+		goto exit_put_test0;
+	}
+
+	if ((err = platform_device_add(test0)))
+		goto exit_put_test1;
+
+	if ((err = platform_device_add(test1)))
+		goto exit_del_test0;
+
+	return 0;
+
+exit_del_test0:
+	platform_device_del(test0);
+
+exit_put_test1:
+	platform_device_put(test1);
+
+exit_put_test0:
+	platform_device_put(test0);
+
+exit_driver_unregister:
+	platform_driver_unregister(&test_driver);
+	return err;
+}
+
+static void __exit test_exit(void)
+{
+	platform_device_unregister(test0);
+	platform_device_unregister(test1);
+	platform_driver_unregister(&test_driver);
+}
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("RTC test driver/device");
+MODULE_LICENSE("GPL");
+
+module_init(test_init);
+module_exit(test_exit);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tile.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tile.c
new file mode 100644
index 0000000..0b60867
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tile.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Tilera-specific RTC driver.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+/* Platform device pointer. */
+static struct platform_device *tile_rtc_platform_device;
+
+/*
+ * RTC read routine.  Gets time info from RTC chip via hypervisor syscall.
+ */
+static int read_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+	HV_RTCTime hvtm = hv_get_rtc();
+
+	tm->tm_sec = hvtm.tm_sec;
+	tm->tm_min = hvtm.tm_min;
+	tm->tm_hour = hvtm.tm_hour;
+	tm->tm_mday = hvtm.tm_mday;
+	tm->tm_mon = hvtm.tm_mon;
+	tm->tm_year = hvtm.tm_year;
+	tm->tm_wday = 0;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+
+	if (rtc_valid_tm(tm) < 0)
+		dev_warn(dev, "Read invalid date/time from RTC\n");
+
+	return 0;
+}
+
+/*
+ * RTC write routine.  Sends time info to hypervisor via syscall, to be
+ * written to RTC chip.
+ */
+static int set_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+	HV_RTCTime hvtm;
+
+	hvtm.tm_sec = tm->tm_sec;
+	hvtm.tm_min = tm->tm_min;
+	hvtm.tm_hour = tm->tm_hour;
+	hvtm.tm_mday = tm->tm_mday;
+	hvtm.tm_mon = tm->tm_mon;
+	hvtm.tm_year = tm->tm_year;
+
+	hv_set_rtc(hvtm);
+
+	return 0;
+}
+
+/*
+ * RTC read/write ops.
+ */
+static const struct rtc_class_ops tile_rtc_ops = {
+	.read_time	= read_rtc_time,
+	.set_time	= set_rtc_time,
+};
+
+/*
+ * Device probe routine.
+ */
+static int tile_rtc_probe(struct platform_device *dev)
+{
+	struct rtc_device *rtc;
+
+	rtc = devm_rtc_device_register(&dev->dev, "tile",
+				&tile_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(dev, rtc);
+
+	return 0;
+}
+
+static struct platform_driver tile_rtc_platform_driver = {
+	.driver		= {
+		.name	= "rtc-tile",
+	},
+	.probe		= tile_rtc_probe,
+};
+
+/*
+ * Driver init routine.
+ */
+static int __init tile_rtc_driver_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&tile_rtc_platform_driver);
+	if (err)
+		return err;
+
+	tile_rtc_platform_device = platform_device_alloc("rtc-tile", 0);
+	if (tile_rtc_platform_device == NULL) {
+		err = -ENOMEM;
+		goto exit_driver_unregister;
+	}
+
+	err = platform_device_add(tile_rtc_platform_device);
+	if (err)
+		goto exit_device_put;
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(tile_rtc_platform_device);
+
+exit_driver_unregister:
+	platform_driver_unregister(&tile_rtc_platform_driver);
+	return err;
+}
+
+/*
+ * Driver cleanup routine.
+ */
+static void __exit tile_rtc_driver_exit(void)
+{
+	platform_device_unregister(tile_rtc_platform_device);
+	platform_driver_unregister(&tile_rtc_platform_driver);
+}
+
+module_init(tile_rtc_driver_init);
+module_exit(tile_rtc_driver_exit);
+
+MODULE_DESCRIPTION("Tilera-specific Real Time Clock Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-tile");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tps6586x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps6586x.c
new file mode 100644
index 0000000..97fdc99
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps6586x.c
@@ -0,0 +1,358 @@
+/*
+ * rtc-tps6586x.c: RTC driver for TI PMIC TPS6586X
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/tps6586x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define RTC_CTRL			0xc0
+#define POR_RESET_N			BIT(7)
+#define OSC_SRC_SEL			BIT(6)
+#define RTC_ENABLE			BIT(5)	/* enables alarm */
+#define RTC_BUF_ENABLE			BIT(4)	/* 32 KHz buffer enable */
+#define PRE_BYPASS			BIT(3)	/* 0=1KHz or 1=32KHz updates */
+#define CL_SEL_MASK			(BIT(2)|BIT(1))
+#define CL_SEL_POS			1
+#define RTC_ALARM1_HI			0xc1
+#define RTC_COUNT4			0xc6
+
+/* start a PMU RTC access by reading the register prior to the RTC_COUNT4 */
+#define RTC_COUNT4_DUMMYREAD		0xc5
+
+/*only 14-bits width in second*/
+#define ALM1_VALID_RANGE_IN_SEC		0x3FFF
+
+#define TPS6586X_RTC_CL_SEL_1_5PF	0x0
+#define TPS6586X_RTC_CL_SEL_6_5PF	0x1
+#define TPS6586X_RTC_CL_SEL_7_5PF	0x2
+#define TPS6586X_RTC_CL_SEL_12_5PF	0x3
+
+struct tps6586x_rtc {
+	struct device		*dev;
+	struct rtc_device	*rtc;
+	int			irq;
+	bool			irq_en;
+	unsigned long long	epoch_start;
+};
+
+static inline struct device *to_tps6586x_dev(struct device *dev)
+{
+	return dev->parent;
+}
+
+static int tps6586x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+	struct device *tps_dev = to_tps6586x_dev(dev);
+	unsigned long long ticks = 0;
+	unsigned long seconds;
+	u8 buff[6];
+	int ret;
+	int i;
+
+	ret = tps6586x_reads(tps_dev, RTC_COUNT4_DUMMYREAD, sizeof(buff), buff);
+	if (ret < 0) {
+		dev_err(dev, "read counter failed with err %d\n", ret);
+		return ret;
+	}
+
+	for (i = 1; i < sizeof(buff); i++) {
+		ticks <<= 8;
+		ticks |= buff[i];
+	}
+
+	seconds = ticks >> 10;
+	seconds += rtc->epoch_start;
+	rtc_time_to_tm(seconds, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int tps6586x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+	struct device *tps_dev = to_tps6586x_dev(dev);
+	unsigned long long ticks;
+	unsigned long seconds;
+	u8 buff[5];
+	int ret;
+
+	rtc_tm_to_time(tm, &seconds);
+	if (seconds < rtc->epoch_start) {
+		dev_err(dev, "requested time unsupported\n");
+		return -EINVAL;
+	}
+	seconds -= rtc->epoch_start;
+
+	ticks = (unsigned long long)seconds << 10;
+	buff[0] = (ticks >> 32) & 0xff;
+	buff[1] = (ticks >> 24) & 0xff;
+	buff[2] = (ticks >> 16) & 0xff;
+	buff[3] = (ticks >> 8) & 0xff;
+	buff[4] = ticks & 0xff;
+
+	/* Disable RTC before changing time */
+	ret = tps6586x_clr_bits(tps_dev, RTC_CTRL, RTC_ENABLE);
+	if (ret < 0) {
+		dev_err(dev, "failed to clear RTC_ENABLE\n");
+		return ret;
+	}
+
+	ret = tps6586x_writes(tps_dev, RTC_COUNT4, sizeof(buff), buff);
+	if (ret < 0) {
+		dev_err(dev, "failed to program new time\n");
+		return ret;
+	}
+
+	/* Enable RTC */
+	ret = tps6586x_set_bits(tps_dev, RTC_CTRL, RTC_ENABLE);
+	if (ret < 0) {
+		dev_err(dev, "failed to set RTC_ENABLE\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int tps6586x_rtc_alarm_irq_enable(struct device *dev,
+			 unsigned int enabled)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled && !rtc->irq_en) {
+		enable_irq(rtc->irq);
+		rtc->irq_en = true;
+	} else if (!enabled && rtc->irq_en)  {
+		disable_irq(rtc->irq);
+		rtc->irq_en = false;
+	}
+	return 0;
+}
+
+static int tps6586x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+	struct device *tps_dev = to_tps6586x_dev(dev);
+	unsigned long seconds;
+	unsigned long ticks;
+	unsigned long rtc_current_time;
+	unsigned long long rticks = 0;
+	u8 buff[3];
+	u8 rbuff[6];
+	int ret;
+	int i;
+
+	rtc_tm_to_time(&alrm->time, &seconds);
+
+	if (alrm->enabled && (seconds < rtc->epoch_start)) {
+		dev_err(dev, "can't set alarm to requested time\n");
+		return -EINVAL;
+	}
+
+	ret = tps6586x_rtc_alarm_irq_enable(dev, alrm->enabled);
+	if (ret < 0) {
+		dev_err(dev, "can't set alarm irq, err %d\n", ret);
+		return ret;
+	}
+
+	seconds -= rtc->epoch_start;
+	ret = tps6586x_reads(tps_dev, RTC_COUNT4_DUMMYREAD,
+			sizeof(rbuff), rbuff);
+	if (ret < 0) {
+		dev_err(dev, "read counter failed with err %d\n", ret);
+		return ret;
+	}
+
+	for (i = 1; i < sizeof(rbuff); i++) {
+		rticks <<= 8;
+		rticks |= rbuff[i];
+	}
+
+	rtc_current_time = rticks >> 10;
+	if ((seconds - rtc_current_time) > ALM1_VALID_RANGE_IN_SEC)
+		seconds = rtc_current_time - 1;
+
+	ticks = (unsigned long long)seconds << 10;
+	buff[0] = (ticks >> 16) & 0xff;
+	buff[1] = (ticks >> 8) & 0xff;
+	buff[2] = ticks & 0xff;
+
+	ret = tps6586x_writes(tps_dev, RTC_ALARM1_HI, sizeof(buff), buff);
+	if (ret)
+		dev_err(dev, "programming alarm failed with err %d\n", ret);
+
+	return ret;
+}
+
+static int tps6586x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+	struct device *tps_dev = to_tps6586x_dev(dev);
+	unsigned long ticks;
+	unsigned long seconds;
+	u8 buff[3];
+	int ret;
+
+	ret = tps6586x_reads(tps_dev, RTC_ALARM1_HI, sizeof(buff), buff);
+	if (ret) {
+		dev_err(dev, "read RTC_ALARM1_HI failed with err %d\n", ret);
+		return ret;
+	}
+
+	ticks = (buff[0] << 16) | (buff[1] << 8) | buff[2];
+	seconds = ticks >> 10;
+	seconds += rtc->epoch_start;
+
+	rtc_time_to_tm(seconds, &alrm->time);
+	return 0;
+}
+
+static const struct rtc_class_ops tps6586x_rtc_ops = {
+	.read_time	= tps6586x_rtc_read_time,
+	.set_time	= tps6586x_rtc_set_time,
+	.set_alarm	= tps6586x_rtc_set_alarm,
+	.read_alarm	= tps6586x_rtc_read_alarm,
+	.alarm_irq_enable = tps6586x_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t tps6586x_rtc_irq(int irq, void *data)
+{
+	struct tps6586x_rtc *rtc = data;
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int tps6586x_rtc_probe(struct platform_device *pdev)
+{
+	struct device *tps_dev = to_tps6586x_dev(&pdev->dev);
+	struct tps6586x_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->dev = &pdev->dev;
+	rtc->irq = platform_get_irq(pdev, 0);
+
+	/* Set epoch start as 00:00:00:01:01:2009 */
+	rtc->epoch_start = mktime(2009, 1, 1, 0, 0, 0);
+
+	/* 1 kHz tick mode, enable tick counting */
+	ret = tps6586x_update(tps_dev, RTC_CTRL,
+		RTC_ENABLE | OSC_SRC_SEL |
+		((TPS6586X_RTC_CL_SEL_1_5PF << CL_SEL_POS) & CL_SEL_MASK),
+		RTC_ENABLE | OSC_SRC_SEL | PRE_BYPASS | CL_SEL_MASK);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to start counter\n");
+		return ret;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+	rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		dev_err(&pdev->dev, "RTC allocate device: ret %d\n", ret);
+		goto fail_rtc_register;
+	}
+
+	rtc->rtc->ops = &tps6586x_rtc_ops;
+
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+				tps6586x_rtc_irq,
+				IRQF_ONESHOT,
+				dev_name(&pdev->dev), rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request IRQ(%d) failed with ret %d\n",
+				rtc->irq, ret);
+		goto fail_rtc_register;
+	}
+	disable_irq(rtc->irq);
+
+	ret = rtc_register_device(rtc->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "RTC device register: ret %d\n", ret);
+		goto fail_rtc_register;
+	}
+
+	return 0;
+
+fail_rtc_register:
+	tps6586x_update(tps_dev, RTC_CTRL, 0,
+		RTC_ENABLE | OSC_SRC_SEL | PRE_BYPASS | CL_SEL_MASK);
+	return ret;
+};
+
+static int tps6586x_rtc_remove(struct platform_device *pdev)
+{
+	struct device *tps_dev = to_tps6586x_dev(&pdev->dev);
+
+	tps6586x_update(tps_dev, RTC_CTRL, 0,
+		RTC_ENABLE | OSC_SRC_SEL | PRE_BYPASS | CL_SEL_MASK);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tps6586x_rtc_suspend(struct device *dev)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq);
+	return 0;
+}
+
+static int tps6586x_rtc_resume(struct device *dev)
+{
+	struct tps6586x_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tps6586x_pm_ops, tps6586x_rtc_suspend,
+			tps6586x_rtc_resume);
+
+static struct platform_driver tps6586x_rtc_driver = {
+	.driver	= {
+		.name	= "tps6586x-rtc",
+		.pm	= &tps6586x_pm_ops,
+	},
+	.probe	= tps6586x_rtc_probe,
+	.remove	= tps6586x_rtc_remove,
+};
+module_platform_driver(tps6586x_rtc_driver);
+
+MODULE_ALIAS("platform:tps6586x-rtc");
+MODULE_DESCRIPTION("TI TPS6586x RTC driver");
+MODULE_AUTHOR("Laxman dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tps65910.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps65910.c
new file mode 100644
index 0000000..a56b526
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps65910.c
@@ -0,0 +1,485 @@
+/*
+ * rtc-tps65910.c -- TPS65910 Real Time Clock interface
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Venu Byravarasu <vbyravarasu@nvidia.com>
+ *
+ * Based on original TI driver rtc-twl.c
+ *   Copyright (C) 2007 MontaVista Software, Inc
+ *   Author: Alexandre Rusev <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/math64.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tps65910.h>
+
+struct tps65910_rtc {
+	struct rtc_device	*rtc;
+	int irq;
+};
+
+/* Total number of RTC registers needed to set time*/
+#define NUM_TIME_REGS	(TPS65910_YEARS - TPS65910_SECONDS + 1)
+
+/* Total number of RTC registers needed to set compensation registers */
+#define NUM_COMP_REGS	(TPS65910_RTC_COMP_MSB - TPS65910_RTC_COMP_LSB + 1)
+
+/* Min and max values supported with 'offset' interface (swapped sign) */
+#define MIN_OFFSET	(-277761)
+#define MAX_OFFSET	(277778)
+
+/* Number of ticks per hour */
+#define TICKS_PER_HOUR	(32768 * 3600)
+
+/* Multiplier for ppb conversions */
+#define PPB_MULT	(1000000000LL)
+
+static int tps65910_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	u8 val = 0;
+
+	if (enabled)
+		val = TPS65910_RTC_INTERRUPTS_IT_ALARM;
+
+	return regmap_write(tps->regmap, TPS65910_RTC_INTERRUPTS, val);
+}
+
+/*
+ * Gets current tps65910 RTC time and date parameters.
+ *
+ * The RTC's time/alarm representation is not what gmtime(3) requires
+ * Linux to use:
+ *
+ *  - Months are 1..12 vs Linux 0-11
+ *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
+ */
+static int tps65910_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char rtc_data[NUM_TIME_REGS];
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	int ret;
+
+	/* Copy RTC counting registers to static registers or latches */
+	ret = regmap_update_bits(tps->regmap, TPS65910_RTC_CTRL,
+		TPS65910_RTC_CTRL_GET_TIME, TPS65910_RTC_CTRL_GET_TIME);
+	if (ret < 0) {
+		dev_err(dev, "RTC CTRL reg update failed with err:%d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_bulk_read(tps->regmap, TPS65910_SECONDS, rtc_data,
+		NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "reading from RTC failed with err:%d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0]);
+	tm->tm_min = bcd2bin(rtc_data[1]);
+	tm->tm_hour = bcd2bin(rtc_data[2]);
+	tm->tm_mday = bcd2bin(rtc_data[3]);
+	tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
+	tm->tm_year = bcd2bin(rtc_data[5]) + 100;
+
+	return ret;
+}
+
+static int tps65910_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char rtc_data[NUM_TIME_REGS];
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	int ret;
+
+	rtc_data[0] = bin2bcd(tm->tm_sec);
+	rtc_data[1] = bin2bcd(tm->tm_min);
+	rtc_data[2] = bin2bcd(tm->tm_hour);
+	rtc_data[3] = bin2bcd(tm->tm_mday);
+	rtc_data[4] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[5] = bin2bcd(tm->tm_year - 100);
+
+	/* Stop RTC while updating the RTC time registers */
+	ret = regmap_update_bits(tps->regmap, TPS65910_RTC_CTRL,
+		TPS65910_RTC_CTRL_STOP_RTC, 0);
+	if (ret < 0) {
+		dev_err(dev, "RTC stop failed with err:%d\n", ret);
+		return ret;
+	}
+
+	/* update all the time registers in one shot */
+	ret = regmap_bulk_write(tps->regmap, TPS65910_SECONDS, rtc_data,
+		NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_set_time error %d\n", ret);
+		return ret;
+	}
+
+	/* Start back RTC */
+	ret = regmap_update_bits(tps->regmap, TPS65910_RTC_CTRL,
+		TPS65910_RTC_CTRL_STOP_RTC, 1);
+	if (ret < 0)
+		dev_err(dev, "RTC start failed with err:%d\n", ret);
+
+	return ret;
+}
+
+/*
+ * Gets current tps65910 RTC alarm time.
+ */
+static int tps65910_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char alarm_data[NUM_TIME_REGS];
+	u32 int_val;
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	int ret;
+
+	ret = regmap_bulk_read(tps->regmap, TPS65910_SECONDS, alarm_data,
+		NUM_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_read_alarm error %d\n", ret);
+		return ret;
+	}
+
+	alm->time.tm_sec = bcd2bin(alarm_data[0]);
+	alm->time.tm_min = bcd2bin(alarm_data[1]);
+	alm->time.tm_hour = bcd2bin(alarm_data[2]);
+	alm->time.tm_mday = bcd2bin(alarm_data[3]);
+	alm->time.tm_mon = bcd2bin(alarm_data[4]) - 1;
+	alm->time.tm_year = bcd2bin(alarm_data[5]) + 100;
+
+	ret = regmap_read(tps->regmap, TPS65910_RTC_INTERRUPTS, &int_val);
+	if (ret < 0)
+		return ret;
+
+	if (int_val & TPS65910_RTC_INTERRUPTS_IT_ALARM)
+		alm->enabled = 1;
+
+	return ret;
+}
+
+static int tps65910_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char alarm_data[NUM_TIME_REGS];
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	int ret;
+
+	ret = tps65910_rtc_alarm_irq_enable(dev, 0);
+	if (ret)
+		return ret;
+
+	alarm_data[0] = bin2bcd(alm->time.tm_sec);
+	alarm_data[1] = bin2bcd(alm->time.tm_min);
+	alarm_data[2] = bin2bcd(alm->time.tm_hour);
+	alarm_data[3] = bin2bcd(alm->time.tm_mday);
+	alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
+	alarm_data[5] = bin2bcd(alm->time.tm_year - 100);
+
+	/* update all the alarm registers in one shot */
+	ret = regmap_bulk_write(tps->regmap, TPS65910_ALARM_SECONDS,
+		alarm_data, NUM_TIME_REGS);
+	if (ret) {
+		dev_err(dev, "rtc_set_alarm error %d\n", ret);
+		return ret;
+	}
+
+	if (alm->enabled)
+		ret = tps65910_rtc_alarm_irq_enable(dev, 1);
+
+	return ret;
+}
+
+static int tps65910_rtc_set_calibration(struct device *dev, int calibration)
+{
+	unsigned char comp_data[NUM_COMP_REGS];
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	s16 value;
+	int ret;
+
+	/*
+	 * TPS65910 uses two's complement 16 bit value for compensation for RTC
+	 * crystal inaccuracies. One time every hour when seconds counter
+	 * increments from 0 to 1 compensation value will be added to internal
+	 * RTC counter value.
+	 *
+	 * Compensation value 0x7FFF is prohibited value.
+	 *
+	 * Valid range for compensation value: [-32768 .. 32766]
+	 */
+	if ((calibration < -32768) || (calibration > 32766)) {
+		dev_err(dev, "RTC calibration value out of range: %d\n",
+			calibration);
+		return -EINVAL;
+	}
+
+	value = (s16)calibration;
+
+	comp_data[0] = (u16)value & 0xFF;
+	comp_data[1] = ((u16)value >> 8) & 0xFF;
+
+	/* Update all the compensation registers in one shot */
+	ret = regmap_bulk_write(tps->regmap, TPS65910_RTC_COMP_LSB,
+		comp_data, NUM_COMP_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_set_calibration error: %d\n", ret);
+		return ret;
+	}
+
+	/* Enable automatic compensation */
+	ret = regmap_update_bits(tps->regmap, TPS65910_RTC_CTRL,
+		TPS65910_RTC_CTRL_AUTO_COMP, TPS65910_RTC_CTRL_AUTO_COMP);
+	if (ret < 0)
+		dev_err(dev, "auto_comp enable failed with error: %d\n", ret);
+
+	return ret;
+}
+
+static int tps65910_rtc_get_calibration(struct device *dev, int *calibration)
+{
+	unsigned char comp_data[NUM_COMP_REGS];
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	unsigned int ctrl;
+	u16 value;
+	int ret;
+
+	ret = regmap_read(tps->regmap, TPS65910_RTC_CTRL, &ctrl);
+	if (ret < 0)
+		return ret;
+
+	/* If automatic compensation is not enabled report back zero */
+	if (!(ctrl & TPS65910_RTC_CTRL_AUTO_COMP)) {
+		*calibration = 0;
+		return 0;
+	}
+
+	ret = regmap_bulk_read(tps->regmap, TPS65910_RTC_COMP_LSB, comp_data,
+		NUM_COMP_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_get_calibration error: %d\n", ret);
+		return ret;
+	}
+
+	value = (u16)comp_data[0] | ((u16)comp_data[1] << 8);
+
+	*calibration = (s16)value;
+
+	return 0;
+}
+
+static int tps65910_read_offset(struct device *dev, long *offset)
+{
+	int calibration;
+	s64 tmp;
+	int ret;
+
+	ret = tps65910_rtc_get_calibration(dev, &calibration);
+	if (ret < 0)
+		return ret;
+
+	/* Convert from RTC calibration register format to ppb format */
+	tmp = calibration * (s64)PPB_MULT;
+	if (tmp < 0)
+		tmp -= TICKS_PER_HOUR / 2LL;
+	else
+		tmp += TICKS_PER_HOUR / 2LL;
+	tmp = div_s64(tmp, TICKS_PER_HOUR);
+
+	/* Offset value operates in negative way, so swap sign */
+	*offset = (long)-tmp;
+
+	return 0;
+}
+
+static int tps65910_set_offset(struct device *dev, long offset)
+{
+	int calibration;
+	s64 tmp;
+	int ret;
+
+	/* Make sure offset value is within supported range */
+	if (offset < MIN_OFFSET || offset > MAX_OFFSET)
+		return -ERANGE;
+
+	/* Convert from ppb format to RTC calibration register format */
+	tmp = offset * (s64)TICKS_PER_HOUR;
+	if (tmp < 0)
+		tmp -= PPB_MULT / 2LL;
+	else
+		tmp += PPB_MULT / 2LL;
+	tmp = div_s64(tmp, PPB_MULT);
+
+	/* Offset value operates in negative way, so swap sign */
+	calibration = (int)-tmp;
+
+	ret = tps65910_rtc_set_calibration(dev, calibration);
+
+	return ret;
+}
+
+static irqreturn_t tps65910_rtc_interrupt(int irq, void *rtc)
+{
+	struct device *dev = rtc;
+	unsigned long events = 0;
+	struct tps65910 *tps = dev_get_drvdata(dev->parent);
+	struct tps65910_rtc *tps_rtc = dev_get_drvdata(dev);
+	int ret;
+	u32 rtc_reg;
+
+	ret = regmap_read(tps->regmap, TPS65910_RTC_STATUS, &rtc_reg);
+	if (ret)
+		return IRQ_NONE;
+
+	if (rtc_reg & TPS65910_RTC_STATUS_ALARM)
+		events = RTC_IRQF | RTC_AF;
+
+	ret = regmap_write(tps->regmap, TPS65910_RTC_STATUS, rtc_reg);
+	if (ret)
+		return IRQ_NONE;
+
+	/* Notify RTC core on event */
+	rtc_update_irq(tps_rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops tps65910_rtc_ops = {
+	.read_time	= tps65910_rtc_read_time,
+	.set_time	= tps65910_rtc_set_time,
+	.read_alarm	= tps65910_rtc_read_alarm,
+	.set_alarm	= tps65910_rtc_set_alarm,
+	.alarm_irq_enable = tps65910_rtc_alarm_irq_enable,
+	.read_offset	= tps65910_read_offset,
+	.set_offset	= tps65910_set_offset,
+};
+
+static int tps65910_rtc_probe(struct platform_device *pdev)
+{
+	struct tps65910 *tps65910 = NULL;
+	struct tps65910_rtc *tps_rtc = NULL;
+	int ret;
+	int irq;
+	u32 rtc_reg;
+
+	tps65910 = dev_get_drvdata(pdev->dev.parent);
+
+	tps_rtc = devm_kzalloc(&pdev->dev, sizeof(struct tps65910_rtc),
+			GFP_KERNEL);
+	if (!tps_rtc)
+		return -ENOMEM;
+
+	tps_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(tps_rtc->rtc))
+		return PTR_ERR(tps_rtc->rtc);
+
+	/* Clear pending interrupts */
+	ret = regmap_read(tps65910->regmap, TPS65910_RTC_STATUS, &rtc_reg);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(tps65910->regmap, TPS65910_RTC_STATUS, rtc_reg);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&pdev->dev, "Enabling rtc-tps65910.\n");
+
+	/* Enable RTC digital power domain */
+	ret = regmap_update_bits(tps65910->regmap, TPS65910_DEVCTRL,
+		DEVCTRL_RTC_PWDN_MASK, 0 << DEVCTRL_RTC_PWDN_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	rtc_reg = TPS65910_RTC_CTRL_STOP_RTC;
+	ret = regmap_write(tps65910->regmap, TPS65910_RTC_CTRL, rtc_reg);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, tps_rtc);
+
+	irq  = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_warn(&pdev->dev, "Wake up is not possible as irq = %d\n",
+			irq);
+		return -ENXIO;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+		tps65910_rtc_interrupt, IRQF_TRIGGER_LOW,
+		dev_name(&pdev->dev), &pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "IRQ is not free.\n");
+		return ret;
+	}
+	tps_rtc->irq = irq;
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	tps_rtc->rtc->ops = &tps65910_rtc_ops;
+
+	ret = rtc_register_device(tps_rtc->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "RTC device register: err %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Disable tps65910 RTC interrupts.
+ * Sets status flag to free.
+ */
+static int tps65910_rtc_remove(struct platform_device *pdev)
+{
+	tps65910_rtc_alarm_irq_enable(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tps65910_rtc_suspend(struct device *dev)
+{
+	struct tps65910_rtc *tps_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(tps_rtc->irq);
+	return 0;
+}
+
+static int tps65910_rtc_resume(struct device *dev)
+{
+	struct tps65910_rtc *tps_rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(tps_rtc->irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tps65910_rtc_pm_ops, tps65910_rtc_suspend,
+			tps65910_rtc_resume);
+
+static struct platform_driver tps65910_rtc_driver = {
+	.probe		= tps65910_rtc_probe,
+	.remove		= tps65910_rtc_remove,
+	.driver		= {
+		.name	= "tps65910-rtc",
+		.pm	= &tps65910_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(tps65910_rtc_driver);
+MODULE_ALIAS("platform:rtc-tps65910");
+MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tps80031.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps80031.c
new file mode 100644
index 0000000..737f26e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tps80031.c
@@ -0,0 +1,337 @@
+/*
+ * rtc-tps80031.c -- TI TPS80031/TPS80032 RTC driver
+ *
+ * RTC driver for TI TPS80031/TPS80032 Fully Integrated
+ * Power Management with Power Path and Battery Charger
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/bcd.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/tps80031.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define ENABLE_ALARM_INT			0x08
+#define ALARM_INT_STATUS			0x40
+
+/**
+ * Setting bit to 1 in STOP_RTC will run the RTC and
+ * setting this bit to 0 will freeze RTC.
+ */
+#define STOP_RTC				0x1
+
+/* Power on reset Values of RTC registers */
+#define TPS80031_RTC_POR_YEAR			0
+#define TPS80031_RTC_POR_MONTH			1
+#define TPS80031_RTC_POR_DAY			1
+
+/* Numbers of registers for time and alarms */
+#define TPS80031_RTC_TIME_NUM_REGS		7
+#define TPS80031_RTC_ALARM_NUM_REGS		6
+
+/**
+ * PMU RTC have only 2 nibbles to store year information, so using an
+ * offset of 100 to set the base year as 2000 for our driver.
+ */
+#define RTC_YEAR_OFFSET 100
+
+struct tps80031_rtc {
+	struct rtc_device	*rtc;
+	int			irq;
+};
+
+static int tps80031_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 buff[TPS80031_RTC_TIME_NUM_REGS];
+	int ret;
+
+	ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
+			TPS80031_SECONDS_REG, TPS80031_RTC_TIME_NUM_REGS, buff);
+	if (ret < 0) {
+		dev_err(dev, "reading RTC_SECONDS_REG failed, err = %d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(buff[0]);
+	tm->tm_min = bcd2bin(buff[1]);
+	tm->tm_hour = bcd2bin(buff[2]);
+	tm->tm_mday = bcd2bin(buff[3]);
+	tm->tm_mon = bcd2bin(buff[4]) - 1;
+	tm->tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
+	tm->tm_wday = bcd2bin(buff[6]);
+	return 0;
+}
+
+static int tps80031_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	u8 buff[7];
+	int ret;
+
+	buff[0] = bin2bcd(tm->tm_sec);
+	buff[1] = bin2bcd(tm->tm_min);
+	buff[2] = bin2bcd(tm->tm_hour);
+	buff[3] = bin2bcd(tm->tm_mday);
+	buff[4] = bin2bcd(tm->tm_mon + 1);
+	buff[5] = bin2bcd(tm->tm_year % RTC_YEAR_OFFSET);
+	buff[6] = bin2bcd(tm->tm_wday);
+
+	/* Stop RTC while updating the RTC time registers */
+	ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
+				TPS80031_RTC_CTRL_REG, STOP_RTC);
+	if (ret < 0) {
+		dev_err(dev->parent, "Stop RTC failed, err = %d\n", ret);
+		return ret;
+	}
+
+	ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
+			TPS80031_SECONDS_REG,
+			TPS80031_RTC_TIME_NUM_REGS, buff);
+	if (ret < 0) {
+		dev_err(dev, "writing RTC_SECONDS_REG failed, err %d\n", ret);
+		return ret;
+	}
+
+	ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+				TPS80031_RTC_CTRL_REG, STOP_RTC);
+	if (ret < 0)
+		dev_err(dev->parent, "Start RTC failed, err = %d\n", ret);
+	return ret;
+}
+
+static int tps80031_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enable)
+{
+	int ret;
+
+	if (enable)
+		ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+				TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
+	else
+		ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
+				TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
+	if (ret < 0) {
+		dev_err(dev, "Update on RTC_INT failed, err = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int tps80031_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	u8 buff[TPS80031_RTC_ALARM_NUM_REGS];
+	int ret;
+
+	buff[0] = bin2bcd(alrm->time.tm_sec);
+	buff[1] = bin2bcd(alrm->time.tm_min);
+	buff[2] = bin2bcd(alrm->time.tm_hour);
+	buff[3] = bin2bcd(alrm->time.tm_mday);
+	buff[4] = bin2bcd(alrm->time.tm_mon + 1);
+	buff[5] = bin2bcd(alrm->time.tm_year % RTC_YEAR_OFFSET);
+	ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
+			TPS80031_ALARM_SECONDS_REG,
+			TPS80031_RTC_ALARM_NUM_REGS, buff);
+	if (ret < 0) {
+		dev_err(dev, "Writing RTC_ALARM failed, err %d\n", ret);
+		return ret;
+	}
+	return tps80031_rtc_alarm_irq_enable(dev, alrm->enabled);
+}
+
+static int tps80031_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	u8 buff[6];
+	int ret;
+
+	ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
+			TPS80031_ALARM_SECONDS_REG,
+			TPS80031_RTC_ALARM_NUM_REGS, buff);
+	if (ret < 0) {
+		dev_err(dev->parent,
+			"reading RTC_ALARM failed, err = %d\n", ret);
+		return ret;
+	}
+
+	alrm->time.tm_sec = bcd2bin(buff[0]);
+	alrm->time.tm_min = bcd2bin(buff[1]);
+	alrm->time.tm_hour = bcd2bin(buff[2]);
+	alrm->time.tm_mday = bcd2bin(buff[3]);
+	alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
+	alrm->time.tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
+	return 0;
+}
+
+static int clear_alarm_int_status(struct device *dev, struct tps80031_rtc *rtc)
+{
+	int ret;
+	u8 buf;
+
+	/**
+	 * As per datasheet, A dummy read of this  RTC_STATUS_REG register
+	 * is necessary before each I2C read in order to update the status
+	 * register value.
+	 */
+	ret = tps80031_read(dev->parent, TPS80031_SLAVE_ID1,
+				TPS80031_RTC_STATUS_REG, &buf);
+	if (ret < 0) {
+		dev_err(dev, "reading RTC_STATUS failed. err = %d\n", ret);
+		return ret;
+	}
+
+	/* clear Alarm status bits.*/
+	ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
+			TPS80031_RTC_STATUS_REG, ALARM_INT_STATUS);
+	if (ret < 0) {
+		dev_err(dev, "clear Alarm INT failed, err = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static irqreturn_t tps80031_rtc_irq(int irq, void *data)
+{
+	struct device *dev = data;
+	struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clear_alarm_int_status(dev, rtc);
+	if (ret < 0)
+		return ret;
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops tps80031_rtc_ops = {
+	.read_time = tps80031_rtc_read_time,
+	.set_time = tps80031_rtc_set_time,
+	.set_alarm = tps80031_rtc_set_alarm,
+	.read_alarm = tps80031_rtc_read_alarm,
+	.alarm_irq_enable = tps80031_rtc_alarm_irq_enable,
+};
+
+static int tps80031_rtc_probe(struct platform_device *pdev)
+{
+	struct tps80031_rtc *rtc;
+	struct rtc_time tm;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	platform_set_drvdata(pdev, rtc);
+
+	/* Start RTC */
+	ret = tps80031_set_bits(pdev->dev.parent, TPS80031_SLAVE_ID1,
+			TPS80031_RTC_CTRL_REG, STOP_RTC);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to start RTC. err = %d\n", ret);
+		return ret;
+	}
+
+	/* If RTC have POR values, set time 01:01:2000 */
+	tps80031_rtc_read_time(&pdev->dev, &tm);
+	if ((tm.tm_year == RTC_YEAR_OFFSET + TPS80031_RTC_POR_YEAR) &&
+		(tm.tm_mon == (TPS80031_RTC_POR_MONTH - 1)) &&
+		(tm.tm_mday == TPS80031_RTC_POR_DAY)) {
+		tm.tm_year = 2000;
+		tm.tm_mday = 1;
+		tm.tm_mon = 1;
+		ret = tps80031_rtc_set_time(&pdev->dev, &tm);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"RTC set time failed, err = %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Clear alarm intretupt status if it is there */
+	ret = clear_alarm_int_status(&pdev->dev, rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Clear alarm int failed, err = %d\n", ret);
+		return ret;
+	}
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+			       &tps80031_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		dev_err(&pdev->dev, "RTC registration failed, err %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+			tps80031_rtc_irq,
+			IRQF_ONESHOT,
+			dev_name(&pdev->dev), rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request IRQ:%d failed, err = %d\n",
+			 rtc->irq, ret);
+		return ret;
+	}
+	device_set_wakeup_capable(&pdev->dev, 1);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tps80031_rtc_suspend(struct device *dev)
+{
+	struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc->irq);
+	return 0;
+}
+
+static int tps80031_rtc_resume(struct device *dev)
+{
+	struct tps80031_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc->irq);
+	return 0;
+};
+#endif
+
+static SIMPLE_DEV_PM_OPS(tps80031_pm_ops, tps80031_rtc_suspend,
+			tps80031_rtc_resume);
+
+static struct platform_driver tps80031_rtc_driver = {
+	.driver	= {
+		.name	= "tps80031-rtc",
+		.pm	= &tps80031_pm_ops,
+	},
+	.probe	= tps80031_rtc_probe,
+};
+
+module_platform_driver(tps80031_rtc_driver);
+
+MODULE_ALIAS("platform:tps80031-rtc");
+MODULE_DESCRIPTION("TI TPS80031/TPS80032 RTC driver");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-twl.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-twl.c
new file mode 100644
index 0000000..3472e79
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-twl.c
@@ -0,0 +1,661 @@
+/*
+ * rtc-twl.c -- TWL Real Time Clock interface
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc
+ * Author: Alexandre Rusev <source@mvista.com>
+ *
+ * Based on original TI driver twl4030-rtc.c
+ *   Copyright (C) 2006 Texas Instruments, Inc.
+ *
+ * Based on rtc-omap.c
+ *   Copyright (C) 2003 MontaVista Software, Inc.
+ *   Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
+ *   Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+
+#include <linux/mfd/twl.h>
+
+enum twl_class {
+	TWL_4030 = 0,
+	TWL_6030,
+};
+
+/*
+ * RTC block register offsets (use TWL_MODULE_RTC)
+ */
+enum {
+	REG_SECONDS_REG = 0,
+	REG_MINUTES_REG,
+	REG_HOURS_REG,
+	REG_DAYS_REG,
+	REG_MONTHS_REG,
+	REG_YEARS_REG,
+	REG_WEEKS_REG,
+
+	REG_ALARM_SECONDS_REG,
+	REG_ALARM_MINUTES_REG,
+	REG_ALARM_HOURS_REG,
+	REG_ALARM_DAYS_REG,
+	REG_ALARM_MONTHS_REG,
+	REG_ALARM_YEARS_REG,
+
+	REG_RTC_CTRL_REG,
+	REG_RTC_STATUS_REG,
+	REG_RTC_INTERRUPTS_REG,
+
+	REG_RTC_COMP_LSB_REG,
+	REG_RTC_COMP_MSB_REG,
+};
+static const u8 twl4030_rtc_reg_map[] = {
+	[REG_SECONDS_REG] = 0x00,
+	[REG_MINUTES_REG] = 0x01,
+	[REG_HOURS_REG] = 0x02,
+	[REG_DAYS_REG] = 0x03,
+	[REG_MONTHS_REG] = 0x04,
+	[REG_YEARS_REG] = 0x05,
+	[REG_WEEKS_REG] = 0x06,
+
+	[REG_ALARM_SECONDS_REG] = 0x07,
+	[REG_ALARM_MINUTES_REG] = 0x08,
+	[REG_ALARM_HOURS_REG] = 0x09,
+	[REG_ALARM_DAYS_REG] = 0x0A,
+	[REG_ALARM_MONTHS_REG] = 0x0B,
+	[REG_ALARM_YEARS_REG] = 0x0C,
+
+	[REG_RTC_CTRL_REG] = 0x0D,
+	[REG_RTC_STATUS_REG] = 0x0E,
+	[REG_RTC_INTERRUPTS_REG] = 0x0F,
+
+	[REG_RTC_COMP_LSB_REG] = 0x10,
+	[REG_RTC_COMP_MSB_REG] = 0x11,
+};
+static const u8 twl6030_rtc_reg_map[] = {
+	[REG_SECONDS_REG] = 0x00,
+	[REG_MINUTES_REG] = 0x01,
+	[REG_HOURS_REG] = 0x02,
+	[REG_DAYS_REG] = 0x03,
+	[REG_MONTHS_REG] = 0x04,
+	[REG_YEARS_REG] = 0x05,
+	[REG_WEEKS_REG] = 0x06,
+
+	[REG_ALARM_SECONDS_REG] = 0x08,
+	[REG_ALARM_MINUTES_REG] = 0x09,
+	[REG_ALARM_HOURS_REG] = 0x0A,
+	[REG_ALARM_DAYS_REG] = 0x0B,
+	[REG_ALARM_MONTHS_REG] = 0x0C,
+	[REG_ALARM_YEARS_REG] = 0x0D,
+
+	[REG_RTC_CTRL_REG] = 0x10,
+	[REG_RTC_STATUS_REG] = 0x11,
+	[REG_RTC_INTERRUPTS_REG] = 0x12,
+
+	[REG_RTC_COMP_LSB_REG] = 0x13,
+	[REG_RTC_COMP_MSB_REG] = 0x14,
+};
+
+/* RTC_CTRL_REG bitfields */
+#define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
+#define BIT_RTC_CTRL_REG_ROUND_30S_M             0x02
+#define BIT_RTC_CTRL_REG_AUTO_COMP_M             0x04
+#define BIT_RTC_CTRL_REG_MODE_12_24_M            0x08
+#define BIT_RTC_CTRL_REG_TEST_MODE_M             0x10
+#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M        0x20
+#define BIT_RTC_CTRL_REG_GET_TIME_M              0x40
+#define BIT_RTC_CTRL_REG_RTC_V_OPT               0x80
+
+/* RTC_STATUS_REG bitfields */
+#define BIT_RTC_STATUS_REG_RUN_M                 0x02
+#define BIT_RTC_STATUS_REG_1S_EVENT_M            0x04
+#define BIT_RTC_STATUS_REG_1M_EVENT_M            0x08
+#define BIT_RTC_STATUS_REG_1H_EVENT_M            0x10
+#define BIT_RTC_STATUS_REG_1D_EVENT_M            0x20
+#define BIT_RTC_STATUS_REG_ALARM_M               0x40
+#define BIT_RTC_STATUS_REG_POWER_UP_M            0x80
+
+/* RTC_INTERRUPTS_REG bitfields */
+#define BIT_RTC_INTERRUPTS_REG_EVERY_M           0x03
+#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M        0x04
+#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M        0x08
+
+
+/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
+#define ALL_TIME_REGS		6
+
+/*----------------------------------------------------------------------*/
+struct twl_rtc {
+	struct device *dev;
+	struct rtc_device *rtc;
+	u8 *reg_map;
+	/*
+	 * Cache the value for timer/alarm interrupts register; this is
+	 * only changed by callers holding rtc ops lock (or resume).
+	 */
+	unsigned char rtc_irq_bits;
+	bool wake_enabled;
+#ifdef CONFIG_PM_SLEEP
+	unsigned char irqstat;
+#endif
+	enum twl_class class;
+};
+
+/*
+ * Supports 1 byte read from TWL RTC register.
+ */
+static int twl_rtc_read_u8(struct twl_rtc *twl_rtc, u8 *data, u8 reg)
+{
+	int ret;
+
+	ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (twl_rtc->reg_map[reg]));
+	if (ret < 0)
+		pr_err("Could not read TWL register %X - error %d\n", reg, ret);
+	return ret;
+}
+
+/*
+ * Supports 1 byte write to TWL RTC registers.
+ */
+static int twl_rtc_write_u8(struct twl_rtc *twl_rtc, u8 data, u8 reg)
+{
+	int ret;
+
+	ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (twl_rtc->reg_map[reg]));
+	if (ret < 0)
+		pr_err("Could not write TWL register %X - error %d\n",
+		       reg, ret);
+	return ret;
+}
+
+/*
+ * Enable 1/second update and/or alarm interrupts.
+ */
+static int set_rtc_irq_bit(struct twl_rtc *twl_rtc, unsigned char bit)
+{
+	unsigned char val;
+	int ret;
+
+	/* if the bit is set, return from here */
+	if (twl_rtc->rtc_irq_bits & bit)
+		return 0;
+
+	val = twl_rtc->rtc_irq_bits | bit;
+	val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
+	ret = twl_rtc_write_u8(twl_rtc, val, REG_RTC_INTERRUPTS_REG);
+	if (ret == 0)
+		twl_rtc->rtc_irq_bits = val;
+
+	return ret;
+}
+
+/*
+ * Disable update and/or alarm interrupts.
+ */
+static int mask_rtc_irq_bit(struct twl_rtc *twl_rtc, unsigned char bit)
+{
+	unsigned char val;
+	int ret;
+
+	/* if the bit is clear, return from here */
+	if (!(twl_rtc->rtc_irq_bits & bit))
+		return 0;
+
+	val = twl_rtc->rtc_irq_bits & ~bit;
+	ret = twl_rtc_write_u8(twl_rtc, val, REG_RTC_INTERRUPTS_REG);
+	if (ret == 0)
+		twl_rtc->rtc_irq_bits = val;
+
+	return ret;
+}
+
+static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	if (enabled) {
+		ret = set_rtc_irq_bit(twl_rtc,
+				      BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+		if (device_can_wakeup(dev) && !twl_rtc->wake_enabled) {
+			enable_irq_wake(irq);
+			twl_rtc->wake_enabled = true;
+		}
+	} else {
+		ret = mask_rtc_irq_bit(twl_rtc,
+				       BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+		if (twl_rtc->wake_enabled) {
+			disable_irq_wake(irq);
+			twl_rtc->wake_enabled = false;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * Gets current TWL RTC time and date parameters.
+ *
+ * The RTC's time/alarm representation is not what gmtime(3) requires
+ * Linux to use:
+ *
+ *  - Months are 1..12 vs Linux 0-11
+ *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
+ */
+static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+	unsigned char rtc_data[ALL_TIME_REGS];
+	int ret;
+	u8 save_control;
+	u8 rtc_control;
+
+	ret = twl_rtc_read_u8(twl_rtc, &save_control, REG_RTC_CTRL_REG);
+	if (ret < 0) {
+		dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret);
+		return ret;
+	}
+	/* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */
+	if (twl_rtc->class == TWL_6030) {
+		if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) {
+			save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M;
+			ret = twl_rtc_write_u8(twl_rtc, save_control,
+					       REG_RTC_CTRL_REG);
+			if (ret < 0) {
+				dev_err(dev, "%s clr GET_TIME, error %d\n",
+					__func__, ret);
+				return ret;
+			}
+		}
+	}
+
+	/* Copy RTC counting registers to static registers or latches */
+	rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M;
+
+	/* for twl6030/32 enable read access to static shadowed registers */
+	if (twl_rtc->class == TWL_6030)
+		rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT;
+
+	ret = twl_rtc_write_u8(twl_rtc, rtc_control, REG_RTC_CTRL_REG);
+	if (ret < 0) {
+		dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
+			(twl_rtc->reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
+
+	if (ret < 0) {
+		dev_err(dev, "%s: reading data, error %d\n", __func__, ret);
+		return ret;
+	}
+
+	/* for twl6030 restore original state of rtc control register */
+	if (twl_rtc->class == TWL_6030) {
+		ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
+		if (ret < 0) {
+			dev_err(dev, "%s: restore CTRL_REG, error %d\n",
+				__func__, ret);
+			return ret;
+		}
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0]);
+	tm->tm_min = bcd2bin(rtc_data[1]);
+	tm->tm_hour = bcd2bin(rtc_data[2]);
+	tm->tm_mday = bcd2bin(rtc_data[3]);
+	tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
+	tm->tm_year = bcd2bin(rtc_data[5]) + 100;
+
+	return ret;
+}
+
+static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+	unsigned char save_control;
+	unsigned char rtc_data[ALL_TIME_REGS];
+	int ret;
+
+	rtc_data[0] = bin2bcd(tm->tm_sec);
+	rtc_data[1] = bin2bcd(tm->tm_min);
+	rtc_data[2] = bin2bcd(tm->tm_hour);
+	rtc_data[3] = bin2bcd(tm->tm_mday);
+	rtc_data[4] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[5] = bin2bcd(tm->tm_year - 100);
+
+	/* Stop RTC while updating the TC registers */
+	ret = twl_rtc_read_u8(twl_rtc, &save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		goto out;
+
+	save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
+	ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		goto out;
+
+	/* update all the time registers in one shot */
+	ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
+		(twl_rtc->reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_set_time error %d\n", ret);
+		goto out;
+	}
+
+	/* Start back RTC */
+	save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
+	ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
+
+out:
+	return ret;
+}
+
+/*
+ * Gets current TWL RTC alarm time.
+ */
+static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+	unsigned char rtc_data[ALL_TIME_REGS];
+	int ret;
+
+	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
+			twl_rtc->reg_map[REG_ALARM_SECONDS_REG], ALL_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_read_alarm error %d\n", ret);
+		return ret;
+	}
+
+	/* some of these fields may be wildcard/"match all" */
+	alm->time.tm_sec = bcd2bin(rtc_data[0]);
+	alm->time.tm_min = bcd2bin(rtc_data[1]);
+	alm->time.tm_hour = bcd2bin(rtc_data[2]);
+	alm->time.tm_mday = bcd2bin(rtc_data[3]);
+	alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
+	alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
+
+	/* report cached alarm enable state */
+	if (twl_rtc->rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
+		alm->enabled = 1;
+
+	return ret;
+}
+
+static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+
+	unsigned char alarm_data[ALL_TIME_REGS];
+	int ret;
+
+	ret = twl_rtc_alarm_irq_enable(dev, 0);
+	if (ret)
+		goto out;
+
+	alarm_data[0] = bin2bcd(alm->time.tm_sec);
+	alarm_data[1] = bin2bcd(alm->time.tm_min);
+	alarm_data[2] = bin2bcd(alm->time.tm_hour);
+	alarm_data[3] = bin2bcd(alm->time.tm_mday);
+	alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
+	alarm_data[5] = bin2bcd(alm->time.tm_year - 100);
+
+	/* update all the alarm registers in one shot */
+	ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
+			twl_rtc->reg_map[REG_ALARM_SECONDS_REG], ALL_TIME_REGS);
+	if (ret) {
+		dev_err(dev, "rtc_set_alarm error %d\n", ret);
+		goto out;
+	}
+
+	if (alm->enabled)
+		ret = twl_rtc_alarm_irq_enable(dev, 1);
+out:
+	return ret;
+}
+
+static irqreturn_t twl_rtc_interrupt(int irq, void *data)
+{
+	struct twl_rtc *twl_rtc = data;
+	unsigned long events;
+	int ret = IRQ_NONE;
+	int res;
+	u8 rd_reg;
+
+	res = twl_rtc_read_u8(twl_rtc, &rd_reg, REG_RTC_STATUS_REG);
+	if (res)
+		goto out;
+	/*
+	 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
+	 * only one (ALARM or RTC) interrupt source may be enabled
+	 * at time, we also could check our results
+	 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
+	 */
+	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+		events = RTC_IRQF | RTC_AF;
+	else
+		events = RTC_IRQF | RTC_PF;
+
+	res = twl_rtc_write_u8(twl_rtc, BIT_RTC_STATUS_REG_ALARM_M,
+			       REG_RTC_STATUS_REG);
+	if (res)
+		goto out;
+
+	if (twl_rtc->class == TWL_4030) {
+		/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
+		 * needs 2 reads to clear the interrupt. One read is done in
+		 * do_twl_pwrirq(). Doing the second read, to clear
+		 * the bit.
+		 *
+		 * FIXME the reason PWR_ISR1 needs an extra read is that
+		 * RTC_IF retriggered until we cleared REG_ALARM_M above.
+		 * But re-reading like this is a bad hack; by doing so we
+		 * risk wrongly clearing status for some other IRQ (losing
+		 * the interrupt).  Be smarter about handling RTC_UF ...
+		 */
+		res = twl_i2c_read_u8(TWL4030_MODULE_INT,
+			&rd_reg, TWL4030_INT_PWR_ISR1);
+		if (res)
+			goto out;
+	}
+
+	/* Notify RTC core on event */
+	rtc_update_irq(twl_rtc->rtc, 1, events);
+
+	ret = IRQ_HANDLED;
+out:
+	return ret;
+}
+
+static const struct rtc_class_ops twl_rtc_ops = {
+	.read_time	= twl_rtc_read_time,
+	.set_time	= twl_rtc_set_time,
+	.read_alarm	= twl_rtc_read_alarm,
+	.set_alarm	= twl_rtc_set_alarm,
+	.alarm_irq_enable = twl_rtc_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int twl_rtc_probe(struct platform_device *pdev)
+{
+	struct twl_rtc *twl_rtc;
+	struct device_node *np = pdev->dev.of_node;
+	int ret = -EINVAL;
+	int irq = platform_get_irq(pdev, 0);
+	u8 rd_reg;
+
+	if (!np) {
+		dev_err(&pdev->dev, "no DT info\n");
+		return -EINVAL;
+	}
+
+	if (irq <= 0)
+		return ret;
+
+	twl_rtc = devm_kzalloc(&pdev->dev, sizeof(*twl_rtc), GFP_KERNEL);
+	if (!twl_rtc)
+		return -ENOMEM;
+
+	if (twl_class_is_4030()) {
+		twl_rtc->class = TWL_4030;
+		twl_rtc->reg_map = (u8 *)twl4030_rtc_reg_map;
+	} else if (twl_class_is_6030()) {
+		twl_rtc->class = TWL_6030;
+		twl_rtc->reg_map = (u8 *)twl6030_rtc_reg_map;
+	} else {
+		dev_err(&pdev->dev, "TWL Class not supported.\n");
+		return -EINVAL;
+	}
+
+	ret = twl_rtc_read_u8(twl_rtc, &rd_reg, REG_RTC_STATUS_REG);
+	if (ret < 0)
+		return ret;
+
+	if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
+		dev_warn(&pdev->dev, "Power up reset detected.\n");
+
+	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
+
+	/* Clear RTC Power up reset and pending alarm interrupts */
+	ret = twl_rtc_write_u8(twl_rtc, rd_reg, REG_RTC_STATUS_REG);
+	if (ret < 0)
+		return ret;
+
+	if (twl_rtc->class == TWL_6030) {
+		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
+	dev_info(&pdev->dev, "Enabling TWL-RTC\n");
+	ret = twl_rtc_write_u8(twl_rtc, BIT_RTC_CTRL_REG_STOP_RTC_M,
+			       REG_RTC_CTRL_REG);
+	if (ret < 0)
+		return ret;
+
+	/* ensure interrupts are disabled, bootloaders can be strange */
+	ret = twl_rtc_write_u8(twl_rtc, 0, REG_RTC_INTERRUPTS_REG);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "unable to disable interrupt\n");
+
+	/* init cached IRQ enable bits */
+	ret = twl_rtc_read_u8(twl_rtc, &twl_rtc->rtc_irq_bits,
+			      REG_RTC_INTERRUPTS_REG);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, twl_rtc);
+	device_init_wakeup(&pdev->dev, 1);
+
+	twl_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&twl_rtc_ops, THIS_MODULE);
+	if (IS_ERR(twl_rtc->rtc)) {
+		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+			PTR_ERR(twl_rtc->rtc));
+		return PTR_ERR(twl_rtc->rtc);
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					twl_rtc_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(&twl_rtc->rtc->dev), twl_rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "IRQ is not free.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Disable all TWL RTC module interrupts.
+ * Sets status flag to free.
+ */
+static int twl_rtc_remove(struct platform_device *pdev)
+{
+	struct twl_rtc *twl_rtc = platform_get_drvdata(pdev);
+
+	/* leave rtc running, but disable irqs */
+	mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+	if (twl_rtc->class == TWL_6030) {
+		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
+	return 0;
+}
+
+static void twl_rtc_shutdown(struct platform_device *pdev)
+{
+	struct twl_rtc *twl_rtc = platform_get_drvdata(pdev);
+
+	/* mask timer interrupts, but leave alarm interrupts on to enable
+	   power-on when alarm is triggered */
+	mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int twl_rtc_suspend(struct device *dev)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+
+	twl_rtc->irqstat = twl_rtc->rtc_irq_bits;
+
+	mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+	return 0;
+}
+
+static int twl_rtc_resume(struct device *dev)
+{
+	struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
+
+	set_rtc_irq_bit(twl_rtc, twl_rtc->irqstat);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(twl_rtc_pm_ops, twl_rtc_suspend, twl_rtc_resume);
+
+static const struct of_device_id twl_rtc_of_match[] = {
+	{.compatible = "ti,twl4030-rtc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
+
+static struct platform_driver twl4030rtc_driver = {
+	.probe		= twl_rtc_probe,
+	.remove		= twl_rtc_remove,
+	.shutdown	= twl_rtc_shutdown,
+	.driver		= {
+		.name		= "twl_rtc",
+		.pm		= &twl_rtc_pm_ops,
+		.of_match_table = twl_rtc_of_match,
+	},
+};
+
+module_platform_driver(twl4030rtc_driver);
+
+MODULE_AUTHOR("Texas Instruments, MontaVista Software");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-tx4939.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-tx4939.c
new file mode 100644
index 0000000..a952808
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-tx4939.c
@@ -0,0 +1,298 @@
+/*
+ * TX4939 internal RTC driver
+ * Based on RBTX49xx patch from CELF patch archive.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2007
+ */
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gfp.h>
+#include <asm/txx9/tx4939.h>
+
+struct tx4939rtc_plat_data {
+	struct rtc_device *rtc;
+	struct tx4939_rtc_reg __iomem *rtcreg;
+	spinlock_t lock;
+};
+
+static struct tx4939rtc_plat_data *get_tx4939rtc_plat_data(struct device *dev)
+{
+	return platform_get_drvdata(to_platform_device(dev));
+}
+
+static int tx4939_rtc_cmd(struct tx4939_rtc_reg __iomem *rtcreg, int cmd)
+{
+	int i = 0;
+
+	__raw_writel(cmd, &rtcreg->ctl);
+	/* This might take 30us (next 32.768KHz clock) */
+	while (__raw_readl(&rtcreg->ctl) & TX4939_RTCCTL_BUSY) {
+		/* timeout on approx. 100us (@ GBUS200MHz) */
+		if (i++ > 200 * 100)
+			return -EBUSY;
+		cpu_relax();
+	}
+	return 0;
+}
+
+static int tx4939_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	int i, ret;
+	unsigned char buf[6];
+
+	buf[0] = 0;
+	buf[1] = 0;
+	buf[2] = secs;
+	buf[3] = secs >> 8;
+	buf[4] = secs >> 16;
+	buf[5] = secs >> 24;
+	spin_lock_irq(&pdata->lock);
+	__raw_writel(0, &rtcreg->adr);
+	for (i = 0; i < 6; i++)
+		__raw_writel(buf[i], &rtcreg->dat);
+	ret = tx4939_rtc_cmd(rtcreg,
+			     TX4939_RTCCTL_COMMAND_SETTIME |
+			     (__raw_readl(&rtcreg->ctl) & TX4939_RTCCTL_ALME));
+	spin_unlock_irq(&pdata->lock);
+	return ret;
+}
+
+static int tx4939_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	int i, ret;
+	unsigned long sec;
+	unsigned char buf[6];
+
+	spin_lock_irq(&pdata->lock);
+	ret = tx4939_rtc_cmd(rtcreg,
+			     TX4939_RTCCTL_COMMAND_GETTIME |
+			     (__raw_readl(&rtcreg->ctl) & TX4939_RTCCTL_ALME));
+	if (ret) {
+		spin_unlock_irq(&pdata->lock);
+		return ret;
+	}
+	__raw_writel(2, &rtcreg->adr);
+	for (i = 2; i < 6; i++)
+		buf[i] = __raw_readl(&rtcreg->dat);
+	spin_unlock_irq(&pdata->lock);
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
+	rtc_time_to_tm(sec, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int tx4939_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	int i, ret;
+	unsigned long sec;
+	unsigned char buf[6];
+
+	if (alrm->time.tm_sec < 0 ||
+	    alrm->time.tm_min < 0 ||
+	    alrm->time.tm_hour < 0 ||
+	    alrm->time.tm_mday < 0 ||
+	    alrm->time.tm_mon < 0 ||
+	    alrm->time.tm_year < 0)
+		return -EINVAL;
+	rtc_tm_to_time(&alrm->time, &sec);
+	buf[0] = 0;
+	buf[1] = 0;
+	buf[2] = sec;
+	buf[3] = sec >> 8;
+	buf[4] = sec >> 16;
+	buf[5] = sec >> 24;
+	spin_lock_irq(&pdata->lock);
+	__raw_writel(0, &rtcreg->adr);
+	for (i = 0; i < 6; i++)
+		__raw_writel(buf[i], &rtcreg->dat);
+	ret = tx4939_rtc_cmd(rtcreg, TX4939_RTCCTL_COMMAND_SETALARM |
+			     (alrm->enabled ? TX4939_RTCCTL_ALME : 0));
+	spin_unlock_irq(&pdata->lock);
+	return ret;
+}
+
+static int tx4939_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	int i, ret;
+	unsigned long sec;
+	unsigned char buf[6];
+	u32 ctl;
+
+	spin_lock_irq(&pdata->lock);
+	ret = tx4939_rtc_cmd(rtcreg,
+			     TX4939_RTCCTL_COMMAND_GETALARM |
+			     (__raw_readl(&rtcreg->ctl) & TX4939_RTCCTL_ALME));
+	if (ret) {
+		spin_unlock_irq(&pdata->lock);
+		return ret;
+	}
+	__raw_writel(2, &rtcreg->adr);
+	for (i = 2; i < 6; i++)
+		buf[i] = __raw_readl(&rtcreg->dat);
+	ctl = __raw_readl(&rtcreg->ctl);
+	alrm->enabled = (ctl & TX4939_RTCCTL_ALME) ? 1 : 0;
+	alrm->pending = (ctl & TX4939_RTCCTL_ALMD) ? 1 : 0;
+	spin_unlock_irq(&pdata->lock);
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
+	rtc_time_to_tm(sec, &alrm->time);
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int tx4939_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+
+	spin_lock_irq(&pdata->lock);
+	tx4939_rtc_cmd(pdata->rtcreg,
+		       TX4939_RTCCTL_COMMAND_NOP |
+		       (enabled ? TX4939_RTCCTL_ALME : 0));
+	spin_unlock_irq(&pdata->lock);
+	return 0;
+}
+
+static irqreturn_t tx4939_rtc_interrupt(int irq, void *dev_id)
+{
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev_id);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	unsigned long events = RTC_IRQF;
+
+	spin_lock(&pdata->lock);
+	if (__raw_readl(&rtcreg->ctl) & TX4939_RTCCTL_ALMD) {
+		events |= RTC_AF;
+		tx4939_rtc_cmd(rtcreg, TX4939_RTCCTL_COMMAND_NOP);
+	}
+	spin_unlock(&pdata->lock);
+	rtc_update_irq(pdata->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops tx4939_rtc_ops = {
+	.read_time		= tx4939_rtc_read_time,
+	.read_alarm		= tx4939_rtc_read_alarm,
+	.set_alarm		= tx4939_rtc_set_alarm,
+	.set_mmss		= tx4939_rtc_set_mmss,
+	.alarm_irq_enable	= tx4939_rtc_alarm_irq_enable,
+};
+
+static ssize_t tx4939_rtc_nvram_read(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	ssize_t count;
+
+	spin_lock_irq(&pdata->lock);
+	for (count = 0; count < size; count++) {
+		__raw_writel(pos++, &rtcreg->adr);
+		*buf++ = __raw_readl(&rtcreg->dat);
+	}
+	spin_unlock_irq(&pdata->lock);
+	return count;
+}
+
+static ssize_t tx4939_rtc_nvram_write(struct file *filp, struct kobject *kobj,
+				      struct bin_attribute *bin_attr,
+				      char *buf, loff_t pos, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct tx4939rtc_plat_data *pdata = get_tx4939rtc_plat_data(dev);
+	struct tx4939_rtc_reg __iomem *rtcreg = pdata->rtcreg;
+	ssize_t count;
+
+	spin_lock_irq(&pdata->lock);
+	for (count = 0; count < size; count++) {
+		__raw_writel(pos++, &rtcreg->adr);
+		__raw_writel(*buf++, &rtcreg->dat);
+	}
+	spin_unlock_irq(&pdata->lock);
+	return count;
+}
+
+static struct bin_attribute tx4939_rtc_nvram_attr = {
+	.attr = {
+		.name = "nvram",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = TX4939_RTC_REG_RAMSIZE,
+	.read = tx4939_rtc_nvram_read,
+	.write = tx4939_rtc_nvram_write,
+};
+
+static int __init tx4939_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct tx4939rtc_plat_data *pdata;
+	struct resource *res;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pdata);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->rtcreg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->rtcreg))
+		return PTR_ERR(pdata->rtcreg);
+
+	spin_lock_init(&pdata->lock);
+	tx4939_rtc_cmd(pdata->rtcreg, TX4939_RTCCTL_COMMAND_NOP);
+	if (devm_request_irq(&pdev->dev, irq, tx4939_rtc_interrupt,
+			     0, pdev->name, &pdev->dev) < 0)
+		return -EBUSY;
+	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+				  &tx4939_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+	pdata->rtc = rtc;
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &tx4939_rtc_nvram_attr);
+
+	return ret;
+}
+
+static int __exit tx4939_rtc_remove(struct platform_device *pdev)
+{
+	struct tx4939rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
+	sysfs_remove_bin_file(&pdev->dev.kobj, &tx4939_rtc_nvram_attr);
+	spin_lock_irq(&pdata->lock);
+	tx4939_rtc_cmd(pdata->rtcreg, TX4939_RTCCTL_COMMAND_NOP);
+	spin_unlock_irq(&pdata->lock);
+	return 0;
+}
+
+static struct platform_driver tx4939_rtc_driver = {
+	.remove		= __exit_p(tx4939_rtc_remove),
+	.driver		= {
+		.name	= "tx4939rtc",
+	},
+};
+
+module_platform_driver_probe(tx4939_rtc_driver, tx4939_rtc_probe);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TX4939 internal RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tx4939rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-v3020.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-v3020.c
new file mode 100644
index 0000000..1f3117b
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-v3020.c
@@ -0,0 +1,374 @@
+/* drivers/rtc/rtc-v3020.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the V3020 RTC
+ *
+ * Changelog:
+ *
+ *  10-May-2006: Raphael Assenat <raph@8d.com>
+ *				- Converted to platform driver
+ *				- Use the generic rtc class
+ *
+ *  ??-???-2004: Someone at Compulab
+ *			- Initial driver creation.
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+#include <linux/bcd.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+
+#undef DEBUG
+
+struct v3020;
+
+struct v3020_chip_ops {
+	int (*map_io)(struct v3020 *chip, struct platform_device *pdev,
+		      struct v3020_platform_data *pdata);
+	void (*unmap_io)(struct v3020 *chip);
+	unsigned char (*read_bit)(struct v3020 *chip);
+	void (*write_bit)(struct v3020 *chip, unsigned char bit);
+};
+
+#define V3020_CS	0
+#define V3020_WR	1
+#define V3020_RD	2
+#define V3020_IO	3
+
+struct v3020 {
+	/* MMIO access */
+	void __iomem *ioaddress;
+	int leftshift;
+
+	/* GPIO access */
+	struct gpio *gpio;
+
+	const struct v3020_chip_ops *ops;
+
+	struct rtc_device *rtc;
+};
+
+
+static int v3020_mmio_map(struct v3020 *chip, struct platform_device *pdev,
+			  struct v3020_platform_data *pdata)
+{
+	if (pdev->num_resources != 1)
+		return -EBUSY;
+
+	if (pdev->resource[0].flags != IORESOURCE_MEM)
+		return -EBUSY;
+
+	chip->leftshift = pdata->leftshift;
+	chip->ioaddress = ioremap(pdev->resource[0].start, 1);
+	if (chip->ioaddress == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static void v3020_mmio_unmap(struct v3020 *chip)
+{
+	iounmap(chip->ioaddress);
+}
+
+static void v3020_mmio_write_bit(struct v3020 *chip, unsigned char bit)
+{
+	writel(bit << chip->leftshift, chip->ioaddress);
+}
+
+static unsigned char v3020_mmio_read_bit(struct v3020 *chip)
+{
+	return !!(readl(chip->ioaddress) & (1 << chip->leftshift));
+}
+
+static const struct v3020_chip_ops v3020_mmio_ops = {
+	.map_io		= v3020_mmio_map,
+	.unmap_io	= v3020_mmio_unmap,
+	.read_bit	= v3020_mmio_read_bit,
+	.write_bit	= v3020_mmio_write_bit,
+};
+
+static struct gpio v3020_gpio[] = {
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC CS"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC WR"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC RD"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC IO"},
+};
+
+static int v3020_gpio_map(struct v3020 *chip, struct platform_device *pdev,
+			  struct v3020_platform_data *pdata)
+{
+	int err;
+
+	v3020_gpio[V3020_CS].gpio = pdata->gpio_cs;
+	v3020_gpio[V3020_WR].gpio = pdata->gpio_wr;
+	v3020_gpio[V3020_RD].gpio = pdata->gpio_rd;
+	v3020_gpio[V3020_IO].gpio = pdata->gpio_io;
+
+	err = gpio_request_array(v3020_gpio, ARRAY_SIZE(v3020_gpio));
+
+	if (!err)
+		chip->gpio = v3020_gpio;
+
+	return err;
+}
+
+static void v3020_gpio_unmap(struct v3020 *chip)
+{
+	gpio_free_array(v3020_gpio, ARRAY_SIZE(v3020_gpio));
+}
+
+static void v3020_gpio_write_bit(struct v3020 *chip, unsigned char bit)
+{
+	gpio_direction_output(chip->gpio[V3020_IO].gpio, bit);
+	gpio_set_value(chip->gpio[V3020_CS].gpio, 0);
+	gpio_set_value(chip->gpio[V3020_WR].gpio, 0);
+	udelay(1);
+	gpio_set_value(chip->gpio[V3020_WR].gpio, 1);
+	gpio_set_value(chip->gpio[V3020_CS].gpio, 1);
+}
+
+static unsigned char v3020_gpio_read_bit(struct v3020 *chip)
+{
+	int bit;
+
+	gpio_direction_input(chip->gpio[V3020_IO].gpio);
+	gpio_set_value(chip->gpio[V3020_CS].gpio, 0);
+	gpio_set_value(chip->gpio[V3020_RD].gpio, 0);
+	udelay(1);
+	bit = !!gpio_get_value(chip->gpio[V3020_IO].gpio);
+	udelay(1);
+	gpio_set_value(chip->gpio[V3020_RD].gpio, 1);
+	gpio_set_value(chip->gpio[V3020_CS].gpio, 1);
+
+	return bit;
+}
+
+static const struct v3020_chip_ops v3020_gpio_ops = {
+	.map_io		= v3020_gpio_map,
+	.unmap_io	= v3020_gpio_unmap,
+	.read_bit	= v3020_gpio_read_bit,
+	.write_bit	= v3020_gpio_write_bit,
+};
+
+static void v3020_set_reg(struct v3020 *chip, unsigned char address,
+			unsigned char data)
+{
+	int i;
+	unsigned char tmp;
+
+	tmp = address;
+	for (i = 0; i < 4; i++) {
+		chip->ops->write_bit(chip, (tmp & 1));
+		tmp >>= 1;
+		udelay(1);
+	}
+
+	/* Commands dont have data */
+	if (!V3020_IS_COMMAND(address)) {
+		for (i = 0; i < 8; i++) {
+			chip->ops->write_bit(chip, (data & 1));
+			data >>= 1;
+			udelay(1);
+		}
+	}
+}
+
+static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address)
+{
+	unsigned int data = 0;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		chip->ops->write_bit(chip, (address & 1));
+		address >>= 1;
+		udelay(1);
+	}
+
+	for (i = 0; i < 8; i++) {
+		data >>= 1;
+		if (chip->ops->read_bit(chip))
+			data |= 0x80;
+		udelay(1);
+	}
+
+	return data;
+}
+
+static int v3020_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct v3020 *chip = dev_get_drvdata(dev);
+	int tmp;
+
+	/* Copy the current time to ram... */
+	v3020_set_reg(chip, V3020_CMD_CLOCK2RAM, 0);
+
+	/* ...and then read constant values. */
+	tmp = v3020_get_reg(chip, V3020_SECONDS);
+	dt->tm_sec	= bcd2bin(tmp);
+	tmp = v3020_get_reg(chip, V3020_MINUTES);
+	dt->tm_min	= bcd2bin(tmp);
+	tmp = v3020_get_reg(chip, V3020_HOURS);
+	dt->tm_hour	= bcd2bin(tmp);
+	tmp = v3020_get_reg(chip, V3020_MONTH_DAY);
+	dt->tm_mday	= bcd2bin(tmp);
+	tmp = v3020_get_reg(chip, V3020_MONTH);
+	dt->tm_mon    = bcd2bin(tmp) - 1;
+	tmp = v3020_get_reg(chip, V3020_WEEK_DAY);
+	dt->tm_wday	= bcd2bin(tmp);
+	tmp = v3020_get_reg(chip, V3020_YEAR);
+	dt->tm_year = bcd2bin(tmp)+100;
+
+	dev_dbg(dev, "\n%s : Read RTC values\n", __func__);
+	dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour);
+	dev_dbg(dev, "tm_min : %i\n", dt->tm_min);
+	dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec);
+	dev_dbg(dev, "tm_year: %i\n", dt->tm_year);
+	dev_dbg(dev, "tm_mon : %i\n", dt->tm_mon);
+	dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday);
+	dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday);
+
+	return 0;
+}
+
+
+static int v3020_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct v3020 *chip = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "\n%s : Setting RTC values\n", __func__);
+	dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec);
+	dev_dbg(dev, "tm_min : %i\n", dt->tm_min);
+	dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour);
+	dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday);
+	dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday);
+	dev_dbg(dev, "tm_year: %i\n", dt->tm_year);
+
+	/* Write all the values to ram... */
+	v3020_set_reg(chip, V3020_SECONDS,	bin2bcd(dt->tm_sec));
+	v3020_set_reg(chip, V3020_MINUTES,	bin2bcd(dt->tm_min));
+	v3020_set_reg(chip, V3020_HOURS,	bin2bcd(dt->tm_hour));
+	v3020_set_reg(chip, V3020_MONTH_DAY,	bin2bcd(dt->tm_mday));
+	v3020_set_reg(chip, V3020_MONTH,	bin2bcd(dt->tm_mon + 1));
+	v3020_set_reg(chip, V3020_WEEK_DAY,	bin2bcd(dt->tm_wday));
+	v3020_set_reg(chip, V3020_YEAR,		bin2bcd(dt->tm_year % 100));
+
+	/* ...and set the clock. */
+	v3020_set_reg(chip, V3020_CMD_RAM2CLOCK, 0);
+
+	/* Compulab used this delay here. I dont know why,
+	 * the datasheet does not specify a delay. */
+	/*mdelay(5);*/
+
+	return 0;
+}
+
+static const struct rtc_class_ops v3020_rtc_ops = {
+	.read_time	= v3020_read_time,
+	.set_time	= v3020_set_time,
+};
+
+static int rtc_probe(struct platform_device *pdev)
+{
+	struct v3020_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct v3020 *chip;
+	int retval = -EBUSY;
+	int i;
+	int temp;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	if (pdata->use_gpio)
+		chip->ops = &v3020_gpio_ops;
+	else
+		chip->ops = &v3020_mmio_ops;
+
+	retval = chip->ops->map_io(chip, pdev, pdata);
+	if (retval)
+		return retval;
+
+	/* Make sure the v3020 expects a communication cycle
+	 * by reading 8 times */
+	for (i = 0; i < 8; i++)
+		temp = chip->ops->read_bit(chip);
+
+	/* Test chip by doing a write/read sequence
+	 * to the chip ram */
+	v3020_set_reg(chip, V3020_SECONDS, 0x33);
+	if (v3020_get_reg(chip, V3020_SECONDS) != 0x33) {
+		retval = -ENODEV;
+		goto err_io;
+	}
+
+	/* Make sure frequency measurement mode, test modes, and lock
+	 * are all disabled */
+	v3020_set_reg(chip, V3020_STATUS_0, 0x0);
+
+	if (pdata->use_gpio)
+		dev_info(&pdev->dev, "Chip available at GPIOs "
+			 "%d, %d, %d, %d\n",
+			 chip->gpio[V3020_CS].gpio, chip->gpio[V3020_WR].gpio,
+			 chip->gpio[V3020_RD].gpio, chip->gpio[V3020_IO].gpio);
+	else
+		dev_info(&pdev->dev, "Chip available at "
+			 "physical address 0x%llx,"
+			 "data connected to D%d\n",
+			 (unsigned long long)pdev->resource[0].start,
+			 chip->leftshift);
+
+	platform_set_drvdata(pdev, chip);
+
+	chip->rtc = devm_rtc_device_register(&pdev->dev, "v3020",
+					&v3020_rtc_ops, THIS_MODULE);
+	if (IS_ERR(chip->rtc)) {
+		retval = PTR_ERR(chip->rtc);
+		goto err_io;
+	}
+
+	return 0;
+
+err_io:
+	chip->ops->unmap_io(chip);
+
+	return retval;
+}
+
+static int rtc_remove(struct platform_device *dev)
+{
+	struct v3020 *chip = platform_get_drvdata(dev);
+
+	chip->ops->unmap_io(chip);
+
+	return 0;
+}
+
+static struct platform_driver rtc_device_driver = {
+	.probe	= rtc_probe,
+	.remove = rtc_remove,
+	.driver = {
+		.name	= "v3020",
+	},
+};
+
+module_platform_driver(rtc_device_driver);
+
+MODULE_DESCRIPTION("V3020 RTC");
+MODULE_AUTHOR("Raphael Assenat");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:v3020");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-vr41xx.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-vr41xx.c
new file mode 100644
index 0000000..7ed0107
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-vr41xx.c
@@ -0,0 +1,369 @@
+/*
+ *  Driver for NEC VR4100 series Real Time Clock unit.
+ *
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/log2.h>
+
+#include <asm/div64.h>
+
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
+MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
+MODULE_LICENSE("GPL v2");
+
+/* RTC 1 registers */
+#define ETIMELREG		0x00
+#define ETIMEMREG		0x02
+#define ETIMEHREG		0x04
+/* RFU */
+#define ECMPLREG		0x08
+#define ECMPMREG		0x0a
+#define ECMPHREG		0x0c
+/* RFU */
+#define RTCL1LREG		0x10
+#define RTCL1HREG		0x12
+#define RTCL1CNTLREG		0x14
+#define RTCL1CNTHREG		0x16
+#define RTCL2LREG		0x18
+#define RTCL2HREG		0x1a
+#define RTCL2CNTLREG		0x1c
+#define RTCL2CNTHREG		0x1e
+
+/* RTC 2 registers */
+#define TCLKLREG		0x00
+#define TCLKHREG		0x02
+#define TCLKCNTLREG		0x04
+#define TCLKCNTHREG		0x06
+/* RFU */
+#define RTCINTREG		0x1e
+ #define TCLOCK_INT		0x08
+ #define RTCLONG2_INT		0x04
+ #define RTCLONG1_INT		0x02
+ #define ELAPSEDTIME_INT	0x01
+
+#define RTC_FREQUENCY		32768
+#define MAX_PERIODIC_RATE	6553
+
+static void __iomem *rtc1_base;
+static void __iomem *rtc2_base;
+
+#define rtc1_read(offset)		readw(rtc1_base + (offset))
+#define rtc1_write(offset, value)	writew((value), rtc1_base + (offset))
+
+#define rtc2_read(offset)		readw(rtc2_base + (offset))
+#define rtc2_write(offset, value)	writew((value), rtc2_base + (offset))
+
+static unsigned long epoch = 1970;	/* Jan 1 1970 00:00:00 */
+
+static DEFINE_SPINLOCK(rtc_lock);
+static char rtc_name[] = "RTC";
+static unsigned long periodic_count;
+static unsigned int alarm_enabled;
+static int aie_irq;
+static int pie_irq;
+
+static inline unsigned long read_elapsed_second(void)
+{
+
+	unsigned long first_low, first_mid, first_high;
+
+	unsigned long second_low, second_mid, second_high;
+
+	do {
+		first_low = rtc1_read(ETIMELREG);
+		first_mid = rtc1_read(ETIMEMREG);
+		first_high = rtc1_read(ETIMEHREG);
+		second_low = rtc1_read(ETIMELREG);
+		second_mid = rtc1_read(ETIMEMREG);
+		second_high = rtc1_read(ETIMEHREG);
+	} while (first_low != second_low || first_mid != second_mid ||
+		 first_high != second_high);
+
+	return (first_high << 17) | (first_mid << 1) | (first_low >> 15);
+}
+
+static inline void write_elapsed_second(unsigned long sec)
+{
+	spin_lock_irq(&rtc_lock);
+
+	rtc1_write(ETIMELREG, (uint16_t)(sec << 15));
+	rtc1_write(ETIMEMREG, (uint16_t)(sec >> 1));
+	rtc1_write(ETIMEHREG, (uint16_t)(sec >> 17));
+
+	spin_unlock_irq(&rtc_lock);
+}
+
+static int vr41xx_rtc_read_time(struct device *dev, struct rtc_time *time)
+{
+	unsigned long epoch_sec, elapsed_sec;
+
+	epoch_sec = mktime(epoch, 1, 1, 0, 0, 0);
+	elapsed_sec = read_elapsed_second();
+
+	rtc_time_to_tm(epoch_sec + elapsed_sec, time);
+
+	return 0;
+}
+
+static int vr41xx_rtc_set_time(struct device *dev, struct rtc_time *time)
+{
+	unsigned long epoch_sec, current_sec;
+
+	epoch_sec = mktime(epoch, 1, 1, 0, 0, 0);
+	current_sec = mktime(time->tm_year + 1900, time->tm_mon + 1, time->tm_mday,
+			     time->tm_hour, time->tm_min, time->tm_sec);
+
+	write_elapsed_second(current_sec - epoch_sec);
+
+	return 0;
+}
+
+static int vr41xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	unsigned long low, mid, high;
+	struct rtc_time *time = &wkalrm->time;
+
+	spin_lock_irq(&rtc_lock);
+
+	low = rtc1_read(ECMPLREG);
+	mid = rtc1_read(ECMPMREG);
+	high = rtc1_read(ECMPHREG);
+	wkalrm->enabled = alarm_enabled;
+
+	spin_unlock_irq(&rtc_lock);
+
+	rtc_time_to_tm((high << 17) | (mid << 1) | (low >> 15), time);
+
+	return 0;
+}
+
+static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	unsigned long alarm_sec;
+	struct rtc_time *time = &wkalrm->time;
+
+	alarm_sec = mktime(time->tm_year + 1900, time->tm_mon + 1, time->tm_mday,
+			   time->tm_hour, time->tm_min, time->tm_sec);
+
+	spin_lock_irq(&rtc_lock);
+
+	if (alarm_enabled)
+		disable_irq(aie_irq);
+
+	rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15));
+	rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1));
+	rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17));
+
+	if (wkalrm->enabled)
+		enable_irq(aie_irq);
+
+	alarm_enabled = wkalrm->enabled;
+
+	spin_unlock_irq(&rtc_lock);
+
+	return 0;
+}
+
+static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_EPOCH_READ:
+		return put_user(epoch, (unsigned long __user *)arg);
+	case RTC_EPOCH_SET:
+		/* Doesn't support before 1900 */
+		if (arg < 1900)
+			return -EINVAL;
+		epoch = arg;
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
+static int vr41xx_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	spin_lock_irq(&rtc_lock);
+	if (enabled) {
+		if (!alarm_enabled) {
+			enable_irq(aie_irq);
+			alarm_enabled = 1;
+		}
+	} else {
+		if (alarm_enabled) {
+			disable_irq(aie_irq);
+			alarm_enabled = 0;
+		}
+	}
+	spin_unlock_irq(&rtc_lock);
+	return 0;
+}
+
+static irqreturn_t elapsedtime_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = (struct platform_device *)dev_id;
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+	rtc2_write(RTCINTREG, ELAPSEDTIME_INT);
+
+	rtc_update_irq(rtc, 1, RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rtclong1_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = (struct platform_device *)dev_id;
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	unsigned long count = periodic_count;
+
+	rtc2_write(RTCINTREG, RTCLONG1_INT);
+
+	rtc1_write(RTCL1LREG, count);
+	rtc1_write(RTCL1HREG, count >> 16);
+
+	rtc_update_irq(rtc, 1, RTC_PF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops vr41xx_rtc_ops = {
+	.ioctl			= vr41xx_rtc_ioctl,
+	.read_time		= vr41xx_rtc_read_time,
+	.set_time		= vr41xx_rtc_set_time,
+	.read_alarm		= vr41xx_rtc_read_alarm,
+	.set_alarm		= vr41xx_rtc_set_alarm,
+	.alarm_irq_enable	= vr41xx_rtc_alarm_irq_enable,
+};
+
+static int rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct rtc_device *rtc;
+	int retval;
+
+	if (pdev->num_resources != 4)
+		return -EBUSY;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EBUSY;
+
+	rtc1_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!rtc1_base)
+		return -EBUSY;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		retval = -EBUSY;
+		goto err_rtc1_iounmap;
+	}
+
+	rtc2_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!rtc2_base) {
+		retval = -EBUSY;
+		goto err_rtc1_iounmap;
+	}
+
+	rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc)) {
+		retval = PTR_ERR(rtc);
+		goto err_iounmap_all;
+	}
+
+	rtc->ops = &vr41xx_rtc_ops;
+
+	rtc->max_user_freq = MAX_PERIODIC_RATE;
+
+	spin_lock_irq(&rtc_lock);
+
+	rtc1_write(ECMPLREG, 0);
+	rtc1_write(ECMPMREG, 0);
+	rtc1_write(ECMPHREG, 0);
+	rtc1_write(RTCL1LREG, 0);
+	rtc1_write(RTCL1HREG, 0);
+
+	spin_unlock_irq(&rtc_lock);
+
+	aie_irq = platform_get_irq(pdev, 0);
+	if (aie_irq <= 0) {
+		retval = -EBUSY;
+		goto err_iounmap_all;
+	}
+
+	retval = devm_request_irq(&pdev->dev, aie_irq, elapsedtime_interrupt, 0,
+				"elapsed_time", pdev);
+	if (retval < 0)
+		goto err_iounmap_all;
+
+	pie_irq = platform_get_irq(pdev, 1);
+	if (pie_irq <= 0) {
+		retval = -EBUSY;
+		goto err_iounmap_all;
+	}
+
+	retval = devm_request_irq(&pdev->dev, pie_irq, rtclong1_interrupt, 0,
+				"rtclong1", pdev);
+	if (retval < 0)
+		goto err_iounmap_all;
+
+	platform_set_drvdata(pdev, rtc);
+
+	disable_irq(aie_irq);
+	disable_irq(pie_irq);
+
+	dev_info(&pdev->dev, "Real Time Clock of NEC VR4100 series\n");
+
+	retval = rtc_register_device(rtc);
+	if (retval)
+		goto err_iounmap_all;
+
+	return 0;
+
+err_iounmap_all:
+	rtc2_base = NULL;
+
+err_rtc1_iounmap:
+	rtc1_base = NULL;
+
+	return retval;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:RTC");
+
+static struct platform_driver rtc_platform_driver = {
+	.probe		= rtc_probe,
+	.driver		= {
+		.name	= rtc_name,
+	},
+};
+
+module_platform_driver(rtc_platform_driver);
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-vt8500.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-vt8500.c
new file mode 100644
index 0000000..27e8969
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-vt8500.c
@@ -0,0 +1,290 @@
+/*
+ * drivers/rtc/rtc-vt8500.c
+ *
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on rtc-pxa.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+/*
+ * Register definitions
+ */
+#define VT8500_RTC_TS		0x00	/* Time set */
+#define VT8500_RTC_DS		0x04	/* Date set */
+#define VT8500_RTC_AS		0x08	/* Alarm set */
+#define VT8500_RTC_CR		0x0c	/* Control */
+#define VT8500_RTC_TR		0x10	/* Time read */
+#define VT8500_RTC_DR		0x14	/* Date read */
+#define VT8500_RTC_WS		0x18	/* Write status */
+#define VT8500_RTC_CL		0x20	/* Calibration */
+#define VT8500_RTC_IS		0x24	/* Interrupt status */
+#define VT8500_RTC_ST		0x28	/* Status */
+
+#define INVALID_TIME_BIT	(1 << 31)
+
+#define DATE_CENTURY_S		19
+#define DATE_YEAR_S		11
+#define DATE_YEAR_MASK		(0xff << DATE_YEAR_S)
+#define DATE_MONTH_S		6
+#define DATE_MONTH_MASK		(0x1f << DATE_MONTH_S)
+#define DATE_DAY_MASK		0x3f
+
+#define TIME_DOW_S		20
+#define TIME_DOW_MASK		(0x07 << TIME_DOW_S)
+#define TIME_HOUR_S		14
+#define TIME_HOUR_MASK		(0x3f << TIME_HOUR_S)
+#define TIME_MIN_S		7
+#define TIME_MIN_MASK		(0x7f << TIME_MIN_S)
+#define TIME_SEC_MASK		0x7f
+
+#define ALARM_DAY_S		20
+#define ALARM_DAY_MASK		(0x3f << ALARM_DAY_S)
+
+#define ALARM_DAY_BIT		(1 << 29)
+#define ALARM_HOUR_BIT		(1 << 28)
+#define ALARM_MIN_BIT		(1 << 27)
+#define ALARM_SEC_BIT		(1 << 26)
+
+#define ALARM_ENABLE_MASK	(ALARM_DAY_BIT \
+				| ALARM_HOUR_BIT \
+				| ALARM_MIN_BIT \
+				| ALARM_SEC_BIT)
+
+#define VT8500_RTC_CR_ENABLE	(1 << 0)	/* Enable RTC */
+#define VT8500_RTC_CR_12H	(1 << 1)	/* 12h time format */
+#define VT8500_RTC_CR_SM_ENABLE	(1 << 2)	/* Enable periodic irqs */
+#define VT8500_RTC_CR_SM_SEC	(1 << 3)	/* 0: 1Hz/60, 1: 1Hz */
+#define VT8500_RTC_CR_CALIB	(1 << 4)	/* Enable calibration */
+
+#define VT8500_RTC_IS_ALARM	(1 << 0)	/* Alarm interrupt status */
+
+struct vt8500_rtc {
+	void __iomem		*regbase;
+	int			irq_alarm;
+	struct rtc_device	*rtc;
+	spinlock_t		lock;		/* Protects this structure */
+};
+
+static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_id;
+	u32 isr;
+	unsigned long events = 0;
+
+	spin_lock(&vt8500_rtc->lock);
+
+	/* clear interrupt sources */
+	isr = readl(vt8500_rtc->regbase + VT8500_RTC_IS);
+	writel(isr, vt8500_rtc->regbase + VT8500_RTC_IS);
+
+	spin_unlock(&vt8500_rtc->lock);
+
+	if (isr & VT8500_RTC_IS_ALARM)
+		events |= RTC_AF | RTC_IRQF;
+
+	rtc_update_irq(vt8500_rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static int vt8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
+	u32 date, time;
+
+	date = readl(vt8500_rtc->regbase + VT8500_RTC_DR);
+	time = readl(vt8500_rtc->regbase + VT8500_RTC_TR);
+
+	tm->tm_sec = bcd2bin(time & TIME_SEC_MASK);
+	tm->tm_min = bcd2bin((time & TIME_MIN_MASK) >> TIME_MIN_S);
+	tm->tm_hour = bcd2bin((time & TIME_HOUR_MASK) >> TIME_HOUR_S);
+	tm->tm_mday = bcd2bin(date & DATE_DAY_MASK);
+	tm->tm_mon = bcd2bin((date & DATE_MONTH_MASK) >> DATE_MONTH_S) - 1;
+	tm->tm_year = bcd2bin((date & DATE_YEAR_MASK) >> DATE_YEAR_S)
+			+ ((date >> DATE_CENTURY_S) & 1 ? 200 : 100);
+	tm->tm_wday = (time & TIME_DOW_MASK) >> TIME_DOW_S;
+
+	return 0;
+}
+
+static int vt8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
+
+	if (tm->tm_year < 100) {
+		dev_warn(dev, "Only years 2000-2199 are supported by the "
+			      "hardware!\n");
+		return -EINVAL;
+	}
+
+	writel((bin2bcd(tm->tm_year % 100) << DATE_YEAR_S)
+		| (bin2bcd(tm->tm_mon + 1) << DATE_MONTH_S)
+		| (bin2bcd(tm->tm_mday))
+		| ((tm->tm_year >= 200) << DATE_CENTURY_S),
+		vt8500_rtc->regbase + VT8500_RTC_DS);
+	writel((bin2bcd(tm->tm_wday) << TIME_DOW_S)
+		| (bin2bcd(tm->tm_hour) << TIME_HOUR_S)
+		| (bin2bcd(tm->tm_min) << TIME_MIN_S)
+		| (bin2bcd(tm->tm_sec)),
+		vt8500_rtc->regbase + VT8500_RTC_TS);
+
+	return 0;
+}
+
+static int vt8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
+	u32 isr, alarm;
+
+	alarm = readl(vt8500_rtc->regbase + VT8500_RTC_AS);
+	isr = readl(vt8500_rtc->regbase + VT8500_RTC_IS);
+
+	alrm->time.tm_mday = bcd2bin((alarm & ALARM_DAY_MASK) >> ALARM_DAY_S);
+	alrm->time.tm_hour = bcd2bin((alarm & TIME_HOUR_MASK) >> TIME_HOUR_S);
+	alrm->time.tm_min = bcd2bin((alarm & TIME_MIN_MASK) >> TIME_MIN_S);
+	alrm->time.tm_sec = bcd2bin((alarm & TIME_SEC_MASK));
+
+	alrm->enabled = (alarm & ALARM_ENABLE_MASK) ? 1 : 0;
+	alrm->pending = (isr & VT8500_RTC_IS_ALARM) ? 1 : 0;
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int vt8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
+
+	writel((alrm->enabled ? ALARM_ENABLE_MASK : 0)
+		| (bin2bcd(alrm->time.tm_mday) << ALARM_DAY_S)
+		| (bin2bcd(alrm->time.tm_hour) << TIME_HOUR_S)
+		| (bin2bcd(alrm->time.tm_min) << TIME_MIN_S)
+		| (bin2bcd(alrm->time.tm_sec)),
+		vt8500_rtc->regbase + VT8500_RTC_AS);
+
+	return 0;
+}
+
+static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
+	unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_AS);
+
+	if (enabled)
+		tmp |= ALARM_ENABLE_MASK;
+	else
+		tmp &= ~ALARM_ENABLE_MASK;
+
+	writel(tmp, vt8500_rtc->regbase + VT8500_RTC_AS);
+	return 0;
+}
+
+static const struct rtc_class_ops vt8500_rtc_ops = {
+	.read_time = vt8500_rtc_read_time,
+	.set_time = vt8500_rtc_set_time,
+	.read_alarm = vt8500_rtc_read_alarm,
+	.set_alarm = vt8500_rtc_set_alarm,
+	.alarm_irq_enable = vt8500_alarm_irq_enable,
+};
+
+static int vt8500_rtc_probe(struct platform_device *pdev)
+{
+	struct vt8500_rtc *vt8500_rtc;
+	struct resource	*res;
+	int ret;
+
+	vt8500_rtc = devm_kzalloc(&pdev->dev,
+			   sizeof(struct vt8500_rtc), GFP_KERNEL);
+	if (!vt8500_rtc)
+		return -ENOMEM;
+
+	spin_lock_init(&vt8500_rtc->lock);
+	platform_set_drvdata(pdev, vt8500_rtc);
+
+	vt8500_rtc->irq_alarm = platform_get_irq(pdev, 0);
+	if (vt8500_rtc->irq_alarm < 0) {
+		dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
+		return vt8500_rtc->irq_alarm;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vt8500_rtc->regbase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vt8500_rtc->regbase))
+		return PTR_ERR(vt8500_rtc->regbase);
+
+	/* Enable RTC and set it to 24-hour mode */
+	writel(VT8500_RTC_CR_ENABLE,
+	       vt8500_rtc->regbase + VT8500_RTC_CR);
+
+	vt8500_rtc->rtc = devm_rtc_device_register(&pdev->dev, "vt8500-rtc",
+					      &vt8500_rtc_ops, THIS_MODULE);
+	if (IS_ERR(vt8500_rtc->rtc)) {
+		ret = PTR_ERR(vt8500_rtc->rtc);
+		dev_err(&pdev->dev,
+			"Failed to register RTC device -> %d\n", ret);
+		goto err_return;
+	}
+
+	ret = devm_request_irq(&pdev->dev, vt8500_rtc->irq_alarm,
+				vt8500_rtc_irq, 0, "rtc alarm", vt8500_rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can't get irq %i, err %d\n",
+			vt8500_rtc->irq_alarm, ret);
+		goto err_return;
+	}
+
+	return 0;
+
+err_return:
+	return ret;
+}
+
+static int vt8500_rtc_remove(struct platform_device *pdev)
+{
+	struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev);
+
+	/* Disable alarm matching */
+	writel(0, vt8500_rtc->regbase + VT8500_RTC_IS);
+
+	return 0;
+}
+
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "via,vt8500-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, wmt_dt_ids);
+
+static struct platform_driver vt8500_rtc_driver = {
+	.probe		= vt8500_rtc_probe,
+	.remove		= vt8500_rtc_remove,
+	.driver		= {
+		.name	= "vt8500-rtc",
+		.of_match_table = wmt_dt_ids,
+	},
+};
+
+module_platform_driver(vt8500_rtc_driver);
+
+MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
+MODULE_DESCRIPTION("VIA VT8500 SoC Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:vt8500-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-wm831x.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-wm831x.c
new file mode 100644
index 0000000..75aea4c
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-wm831x.c
@@ -0,0 +1,487 @@
+/*
+ *	Real Time Clock driver for Wolfson Microelectronics WM831x
+ *
+ *	Copyright (C) 2009 Wolfson Microelectronics PLC.
+ *
+ *  Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+
+/*
+ * R16416 (0x4020) - RTC Write Counter
+ */
+#define WM831X_RTC_WR_CNT_MASK                  0xFFFF  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_SHIFT                      0  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_WIDTH                     16  /* RTC_WR_CNT - [15:0] */
+
+/*
+ * R16417 (0x4021) - RTC Time 1
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16418 (0x4022) - RTC Time 2
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16419 (0x4023) - RTC Alarm 1
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16420 (0x4024) - RTC Alarm 2
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16421 (0x4025) - RTC Control
+ */
+#define WM831X_RTC_VALID                        0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_MASK                   0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_SHIFT                      15  /* RTC_VALID */
+#define WM831X_RTC_VALID_WIDTH                       1  /* RTC_VALID */
+#define WM831X_RTC_SYNC_BUSY                    0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_MASK               0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_SHIFT                  14  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_WIDTH                   1  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_ALM_ENA                      0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_MASK                 0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_SHIFT                    10  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_WIDTH                     1  /* RTC_ALM_ENA */
+#define WM831X_RTC_PINT_FREQ_MASK               0x0070  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_SHIFT                   4  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_WIDTH                   3  /* RTC_PINT_FREQ - [6:4] */
+
+/*
+ * R16422 (0x4026) - RTC Trim
+ */
+#define WM831X_RTC_TRIM_MASK                    0x03FF  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_SHIFT                        0  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_WIDTH                       10  /* RTC_TRIM - [9:0] */
+
+#define WM831X_SET_TIME_RETRIES	5
+#define WM831X_GET_TIME_RETRIES	5
+
+struct wm831x_rtc {
+	struct wm831x *wm831x;
+	struct rtc_device *rtc;
+	unsigned int alarm_enabled:1;
+};
+
+static void wm831x_rtc_add_randomness(struct wm831x *wm831x)
+{
+	int ret;
+	u16 reg;
+
+	/*
+	 * The write counter contains a pseudo-random number which is
+	 * regenerated every time we set the RTC so it should be a
+	 * useful per-system source of entropy.
+	 */
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_WRITE_COUNTER);
+	if (ret >= 0) {
+		reg = ret;
+		add_device_randomness(&reg, sizeof(reg));
+	} else {
+		dev_warn(wm831x->dev, "Failed to read RTC write counter: %d\n",
+			 ret);
+	}
+}
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	u16 time1[2], time2[2];
+	int ret;
+	int count = 0;
+
+	/* Has the RTC been programmed? */
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+	if (!(ret & WM831X_RTC_VALID)) {
+		dev_dbg(dev, "RTC not yet configured\n");
+		return -EINVAL;
+	}
+
+	/* Read twice to make sure we don't read a corrupt, partially
+	 * incremented, value.
+	 */
+	do {
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time1);
+		if (ret != 0)
+			continue;
+
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time2);
+		if (ret != 0)
+			continue;
+
+		if (memcmp(time1, time2, sizeof(time1)) == 0) {
+			u32 time = (time1[0] << 16) | time1[1];
+
+			rtc_time_to_tm(time, tm);
+			return rtc_valid_tm(tm);
+		}
+
+	} while (++count < WM831X_GET_TIME_RETRIES);
+
+	dev_err(dev, "Timed out reading current time\n");
+
+	return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	struct rtc_time new_tm;
+	unsigned long new_time;
+	int ret;
+	int count = 0;
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_2: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait for the update to complete - should happen first time
+	 * round but be conservative.
+	 */
+	do {
+		msleep(1);
+
+		ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+		if (ret < 0)
+			ret = WM831X_RTC_SYNC_BUSY;
+	} while (!(ret & WM831X_RTC_SYNC_BUSY) &&
+		 ++count < WM831X_SET_TIME_RETRIES);
+
+	if (ret & WM831X_RTC_SYNC_BUSY) {
+		dev_err(dev, "Timed out writing RTC update\n");
+		return -EIO;
+	}
+
+	/* Check that the update was accepted; security features may
+	 * have caused the update to be ignored.
+	 */
+	ret = wm831x_rtc_readtime(dev, &new_tm);
+	if (ret < 0)
+		return ret;
+
+	ret = rtc_tm_to_time(&new_tm, &new_time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	/* Allow a second of change in case of tick */
+	if (new_time - time > 1) {
+		dev_err(dev, "RTC update not permitted by hardware\n");
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	int ret;
+	u16 data[2];
+	u32 time;
+
+	ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1,
+			       2, data);
+	if (ret != 0) {
+		dev_err(dev, "Failed to read alarm time: %d\n", ret);
+		return ret;
+	}
+
+	time = (data[0] << 16) | data[1];
+
+	rtc_time_to_tm(time, &alrm->time);
+
+	ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+
+	if (ret & WM831X_RTC_ALM_ENA)
+		alrm->enabled = 1;
+	else
+		alrm->enabled = 0;
+
+	return 0;
+}
+
+static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 0;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, 0);
+}
+
+static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 1;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA);
+}
+
+static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	int ret;
+	unsigned long time;
+
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_rtc_stop_alarm(wm831x_rtc);
+	if (ret < 0) {
+		dev_err(dev, "Failed to stop alarm: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_2: %d\n", ret);
+		return ret;
+	}
+
+	if (alrm->enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start alarm: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int wm831x_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		return wm831x_rtc_start_alarm(wm831x_rtc);
+	else
+		return wm831x_rtc_stop_alarm(wm831x_rtc);
+}
+
+static irqreturn_t wm831x_alm_irq(int irq, void *data)
+{
+	struct wm831x_rtc *wm831x_rtc = data;
+
+	rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm831x_rtc_ops = {
+	.read_time = wm831x_rtc_readtime,
+	.set_mmss = wm831x_rtc_set_mmss,
+	.read_alarm = wm831x_rtc_readalarm,
+	.set_alarm = wm831x_rtc_setalarm,
+	.alarm_irq_enable = wm831x_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int wm831x_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret, enable;
+
+	if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev))
+		enable = WM831X_RTC_ALM_ENA;
+	else
+		enable = 0;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, enable);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret);
+
+	return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int wm831x_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (wm831x_rtc->alarm_enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret != 0)
+			dev_err(&pdev->dev,
+				"Failed to restart RTC alarm: %d\n", ret);
+	}
+
+	return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int wm831x_rtc_freeze(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, 0);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret);
+
+	return 0;
+}
+#else
+#define wm831x_rtc_suspend NULL
+#define wm831x_rtc_resume NULL
+#define wm831x_rtc_freeze NULL
+#endif
+
+static int wm831x_rtc_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_rtc *wm831x_rtc;
+	int alm_irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "ALM"));
+	int ret = 0;
+
+	wm831x_rtc = devm_kzalloc(&pdev->dev, sizeof(*wm831x_rtc), GFP_KERNEL);
+	if (wm831x_rtc == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wm831x_rtc);
+	wm831x_rtc->wm831x = wm831x;
+
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
+		goto err;
+	}
+	if (ret & WM831X_RTC_ALM_ENA)
+		wm831x_rtc->alarm_enabled = 1;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	wm831x_rtc->rtc = devm_rtc_device_register(&pdev->dev, "wm831x",
+					      &wm831x_rtc_ops, THIS_MODULE);
+	if (IS_ERR(wm831x_rtc->rtc)) {
+		ret = PTR_ERR(wm831x_rtc->rtc);
+		goto err;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, alm_irq, NULL,
+				wm831x_alm_irq,
+				IRQF_TRIGGER_RISING, "RTC alarm",
+				wm831x_rtc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+			alm_irq, ret);
+	}
+
+	wm831x_rtc_add_randomness(wm831x);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static const struct dev_pm_ops wm831x_rtc_pm_ops = {
+	.suspend = wm831x_rtc_suspend,
+	.resume = wm831x_rtc_resume,
+
+	.freeze = wm831x_rtc_freeze,
+	.thaw = wm831x_rtc_resume,
+	.restore = wm831x_rtc_resume,
+
+	.poweroff = wm831x_rtc_suspend,
+};
+
+static struct platform_driver wm831x_rtc_driver = {
+	.probe = wm831x_rtc_probe,
+	.driver = {
+		.name = "wm831x-rtc",
+		.pm = &wm831x_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(wm831x_rtc_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-wm8350.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-wm8350.c
new file mode 100644
index 0000000..483c799
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-wm8350.c
@@ -0,0 +1,483 @@
+/*
+ *	Real Time Clock driver for Wolfson Microelectronics WM8350
+ *
+ *	Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ *  Author: Liam Girdwood
+ *          linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#define WM8350_SET_ALM_RETRIES	5
+#define WM8350_SET_TIME_RETRIES	5
+#define WM8350_GET_TIME_RETRIES	5
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	u16 time1[4], time2[4];
+	int retries = WM8350_GET_TIME_RETRIES, ret;
+
+	/*
+	 * Read the time twice and compare.
+	 * If time1 == time2, then time is valid else retry.
+	 */
+	do {
+		ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+					4, time1);
+		if (ret < 0)
+			return ret;
+		ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+					4, time2);
+		if (ret < 0)
+			return ret;
+
+		if (memcmp(time1, time2, sizeof(time1)) == 0) {
+			tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK;
+
+			tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK)
+			    >> WM8350_RTC_MINS_SHIFT;
+
+			tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK;
+
+			tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT)
+				       & 0x7) - 1;
+
+			tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK)
+				      >> WM8350_RTC_MTH_SHIFT) - 1;
+
+			tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK);
+
+			tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK)
+				       >> WM8350_RTC_YHUNDREDS_SHIFT) * 100;
+			tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK;
+
+			tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
+						    tm->tm_year);
+			tm->tm_year -= 1900;
+
+			dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n",
+				retries,
+				time1[0], time1[1], time1[2], time1[3]);
+
+			return 0;
+		}
+	} while (retries--);
+
+	dev_err(dev, "timed out reading RTC time\n");
+	return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	u16 time[4];
+	u16 rtc_ctrl;
+	int ret, retries = WM8350_SET_TIME_RETRIES;
+
+	time[0] = tm->tm_sec;
+	time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT;
+	time[1] = tm->tm_hour;
+	time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT;
+	time[2] = tm->tm_mday;
+	time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT;
+	time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT;
+	time[3] |= (tm->tm_year + 1900) % 100;
+
+	dev_dbg(dev, "Setting: %04x %04x %04x %04x\n",
+		time[0], time[1], time[2], time[3]);
+
+	/* Set RTC_SET to stop the clock */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation of stopping */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (--retries && !(rtc_ctrl & WM8350_RTC_STS));
+
+	if (!retries) {
+		dev_err(dev, "timed out on set confirmation\n");
+		return -EIO;
+	}
+
+	/* Write time to RTC */
+	ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time);
+	if (ret < 0)
+		return ret;
+
+	/* Clear RTC_SET to start the clock */
+	ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+				WM8350_RTC_SET);
+	return ret;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	u16 time[4];
+	int ret;
+
+	ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time);
+	if (ret < 0)
+		return ret;
+
+	tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK;
+	if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK)
+		tm->tm_sec = -1;
+
+	tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK;
+	if (tm->tm_min == WM8350_RTC_ALMMINS_MASK)
+		tm->tm_min = -1;
+	else
+		tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT;
+
+	tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK;
+	if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK)
+		tm->tm_hour = -1;
+
+	tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1;
+	if (tm->tm_wday > 7)
+		tm->tm_wday = -1;
+
+	tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK;
+	if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK)
+		tm->tm_mon = -1;
+	else
+		tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1;
+
+	tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK);
+	if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK)
+		tm->tm_mday = -1;
+
+	tm->tm_year = -1;
+
+	alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS);
+
+	return 0;
+}
+
+static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+{
+	int retries = WM8350_SET_ALM_RETRIES;
+	u16 rtc_ctrl;
+	int ret;
+
+	/* Set RTC_SET to stop the clock */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+			      WM8350_RTC_ALMSET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation of stopping */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+	if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+{
+	int ret;
+	int retries = WM8350_SET_ALM_RETRIES;
+	u16 rtc_ctrl;
+
+	ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+				WM8350_RTC_ALMSET);
+	if (ret < 0)
+		return ret;
+
+	/* Wait until confirmation */
+	do {
+		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+	} while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+	if (rtc_ctrl & WM8350_RTC_ALMSTS)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int wm8350_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+
+	if (enabled)
+		return wm8350_rtc_start_alarm(wm8350);
+	else
+		return wm8350_rtc_stop_alarm(wm8350);
+}
+
+static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	u16 time[3];
+	int ret;
+
+	memset(time, 0, sizeof(time));
+
+	if (tm->tm_sec != -1)
+		time[0] |= tm->tm_sec;
+	else
+		time[0] |= WM8350_RTC_ALMSECS_MASK;
+
+	if (tm->tm_min != -1)
+		time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT;
+	else
+		time[0] |= WM8350_RTC_ALMMINS_MASK;
+
+	if (tm->tm_hour != -1)
+		time[1] |= tm->tm_hour;
+	else
+		time[1] |= WM8350_RTC_ALMHRS_MASK;
+
+	if (tm->tm_wday != -1)
+		time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT;
+	else
+		time[1] |= WM8350_RTC_ALMDAY_MASK;
+
+	if (tm->tm_mday != -1)
+		time[2] |= tm->tm_mday;
+	else
+		time[2] |= WM8350_RTC_ALMDATE_MASK;
+
+	if (tm->tm_mon != -1)
+		time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT;
+	else
+		time[2] |= WM8350_RTC_ALMMTH_MASK;
+
+	ret = wm8350_rtc_stop_alarm(wm8350);
+	if (ret < 0)
+		return ret;
+
+	/* Write time to RTC */
+	ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES,
+				 3, time);
+	if (ret < 0)
+		return ret;
+
+	if (alrm->enabled)
+		ret = wm8350_rtc_start_alarm(wm8350);
+
+	return ret;
+}
+
+static irqreturn_t wm8350_rtc_alarm_handler(int irq, void *data)
+{
+	struct wm8350 *wm8350 = data;
+	struct rtc_device *rtc = wm8350->rtc.rtc;
+	int ret;
+
+	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+	/* Make it one shot */
+	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+			      WM8350_RTC_ALMSET);
+	if (ret != 0) {
+		dev_err(&(wm8350->rtc.pdev->dev),
+			"Failed to disable alarm: %d\n", ret);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm8350_rtc_update_handler(int irq, void *data)
+{
+	struct wm8350 *wm8350 = data;
+	struct rtc_device *rtc = wm8350->rtc.rtc;
+
+	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm8350_rtc_ops = {
+	.read_time = wm8350_rtc_readtime,
+	.set_time = wm8350_rtc_settime,
+	.read_alarm = wm8350_rtc_readalarm,
+	.set_alarm = wm8350_rtc_setalarm,
+	.alarm_irq_enable = wm8350_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int wm8350_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+	int ret = 0;
+	u16 reg;
+
+	reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+
+	if (device_may_wakeup(&wm8350->rtc.pdev->dev) &&
+	    reg & WM8350_RTC_ALMSTS) {
+		ret = wm8350_rtc_stop_alarm(wm8350);
+		if (ret != 0)
+			dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n",
+				ret);
+	}
+
+	return ret;
+}
+
+static int wm8350_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (wm8350->rtc.alarm_enabled) {
+		ret = wm8350_rtc_start_alarm(wm8350);
+		if (ret != 0)
+			dev_err(&pdev->dev,
+				"Failed to restart RTC alarm: %d\n", ret);
+	}
+
+	return 0;
+}
+#endif
+
+static int wm8350_rtc_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+	int ret = 0;
+	u16 timectl, power5;
+
+	timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+	if (timectl & WM8350_RTC_BCD) {
+		dev_err(&pdev->dev, "RTC BCD mode not supported\n");
+		return -EINVAL;
+	}
+	if (timectl & WM8350_RTC_12HR) {
+		dev_err(&pdev->dev, "RTC 12 hour mode not supported\n");
+		return -EINVAL;
+	}
+
+	/* enable the RTC if it's not already enabled */
+	power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+	if (!(power5 &  WM8350_RTC_TICK_ENA)) {
+		dev_info(wm8350->dev, "Starting RTC\n");
+
+		wm8350_reg_unlock(wm8350);
+
+		ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5,
+				      WM8350_RTC_TICK_ENA);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret);
+			return ret;
+		}
+
+		wm8350_reg_lock(wm8350);
+	}
+
+	if (timectl & WM8350_RTC_STS) {
+		int retries;
+
+		ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+					WM8350_RTC_SET);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to start: %d\n", ret);
+			return ret;
+		}
+
+		retries = WM8350_SET_TIME_RETRIES;
+		do {
+			timectl = wm8350_reg_read(wm8350,
+						  WM8350_RTC_TIME_CONTROL);
+		} while (timectl & WM8350_RTC_STS && --retries);
+
+		if (retries == 0) {
+			dev_err(&pdev->dev, "failed to start: timeout\n");
+			return -ENODEV;
+		}
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	wm_rtc->rtc = devm_rtc_device_register(&pdev->dev, "wm8350",
+					&wm8350_rtc_ops, THIS_MODULE);
+	if (IS_ERR(wm_rtc->rtc)) {
+		ret = PTR_ERR(wm_rtc->rtc);
+		dev_err(&pdev->dev, "failed to register RTC: %d\n", ret);
+		return ret;
+	}
+
+	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC,
+			    wm8350_rtc_update_handler, 0,
+			    "RTC Seconds", wm8350);
+	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+
+	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM,
+			    wm8350_rtc_alarm_handler, 0,
+			    "RTC Alarm", wm8350);
+
+	return 0;
+}
+
+static int wm8350_rtc_remove(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+
+	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM, wm8350);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(wm8350_rtc_pm_ops, wm8350_rtc_suspend,
+			wm8350_rtc_resume);
+
+static struct platform_driver wm8350_rtc_driver = {
+	.probe = wm8350_rtc_probe,
+	.remove = wm8350_rtc_remove,
+	.driver = {
+		.name = "wm8350-rtc",
+		.pm = &wm8350_rtc_pm_ops,
+	},
+};
+
+module_platform_driver(wm8350_rtc_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM8350");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-rtc");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-x1205.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-x1205.c
new file mode 100644
index 0000000..f08f18e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-x1205.c
@@ -0,0 +1,691 @@
+/*
+ * An i2c driver for the Xicor/Intersil X1205 RTC
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * please send all reports to:
+ *	Karen Spearel <kas111 at gmail dot com>
+ *	Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on a lot of other RTC drivers.
+ *
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+
+/* offsets into CCR area */
+
+#define CCR_SEC			0
+#define CCR_MIN			1
+#define CCR_HOUR		2
+#define CCR_MDAY		3
+#define CCR_MONTH		4
+#define CCR_YEAR		5
+#define CCR_WDAY		6
+#define CCR_Y2K			7
+
+#define X1205_REG_SR		0x3F	/* status register */
+#define X1205_REG_Y2K		0x37
+#define X1205_REG_DW		0x36
+#define X1205_REG_YR		0x35
+#define X1205_REG_MO		0x34
+#define X1205_REG_DT		0x33
+#define X1205_REG_HR		0x32
+#define X1205_REG_MN		0x31
+#define X1205_REG_SC		0x30
+#define X1205_REG_DTR		0x13
+#define X1205_REG_ATR		0x12
+#define X1205_REG_INT		0x11
+#define X1205_REG_0		0x10
+#define X1205_REG_Y2K1		0x0F
+#define X1205_REG_DWA1		0x0E
+#define X1205_REG_YRA1		0x0D
+#define X1205_REG_MOA1		0x0C
+#define X1205_REG_DTA1		0x0B
+#define X1205_REG_HRA1		0x0A
+#define X1205_REG_MNA1		0x09
+#define X1205_REG_SCA1		0x08
+#define X1205_REG_Y2K0		0x07
+#define X1205_REG_DWA0		0x06
+#define X1205_REG_YRA0		0x05
+#define X1205_REG_MOA0		0x04
+#define X1205_REG_DTA0		0x03
+#define X1205_REG_HRA0		0x02
+#define X1205_REG_MNA0		0x01
+#define X1205_REG_SCA0		0x00
+
+#define X1205_CCR_BASE		0x30	/* Base address of CCR */
+#define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
+
+#define X1205_SR_RTCF		0x01	/* Clock failure */
+#define X1205_SR_WEL		0x02	/* Write Enable Latch */
+#define X1205_SR_RWEL		0x04	/* Register Write Enable */
+#define X1205_SR_AL0		0x20	/* Alarm 0 match */
+
+#define X1205_DTR_DTR0		0x01
+#define X1205_DTR_DTR1		0x02
+#define X1205_DTR_DTR2		0x04
+
+#define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
+
+#define X1205_INT_AL0E		0x20	/* Alarm 0 enable */
+
+static struct i2c_driver x1205_driver;
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+				unsigned char reg_base)
+{
+	unsigned char dt_addr[2] = { 0, reg_base };
+	unsigned char buf[8];
+	int i;
+
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 2,
+			.buf = dt_addr
+		},
+		{/* read date */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 8,
+			.buf = buf
+		},
+	};
+
+	/* read date registers */
+	if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+		__func__,
+		buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6], buf[7]);
+
+	/* Mask out the enable bits if these are alarm registers */
+	if (reg_base < X1205_CCR_BASE)
+		for (i = 0; i <= 4; i++)
+			buf[i] &= 0x7F;
+
+	tm->tm_sec = bcd2bin(buf[CCR_SEC]);
+	tm->tm_min = bcd2bin(buf[CCR_MIN]);
+	tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+	tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
+	tm->tm_mon = bcd2bin(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
+	tm->tm_year = bcd2bin(buf[CCR_YEAR])
+			+ (bcd2bin(buf[CCR_Y2K]) * 100) - 1900;
+	tm->tm_wday = buf[CCR_WDAY];
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return 0;
+}
+
+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
+{
+	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
+
+	struct i2c_msg msgs[] = {
+		{     /* setup read ptr */
+			.addr = client->addr,
+			.len = 2,
+			.buf = sr_addr
+		},
+		{    /* read status */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = sr
+		},
+	};
+
+	/* read status register */
+	if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+			u8 reg_base, unsigned char alm_enable)
+{
+	int i, xfer;
+	unsigned char rdata[10] = { 0, reg_base };
+	unsigned char *buf = rdata + 2;
+
+	static const unsigned char wel[3] = { 0, X1205_REG_SR,
+						X1205_SR_WEL };
+
+	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+						X1205_SR_WEL | X1205_SR_RWEL };
+
+	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+	dev_dbg(&client->dev,
+		"%s: sec=%d min=%d hour=%d mday=%d mon=%d year=%d wday=%d\n",
+		__func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	buf[CCR_SEC] = bin2bcd(tm->tm_sec);
+	buf[CCR_MIN] = bin2bcd(tm->tm_min);
+
+	/* set hour and 24hr bit */
+	buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
+
+	buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[CCR_MONTH] = bin2bcd(tm->tm_mon + 1);
+
+	/* year, since the rtc epoch*/
+	buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
+	buf[CCR_WDAY] = tm->tm_wday & 0x07;
+	buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100);
+
+	/* If writing alarm registers, set compare bits on registers 0-4 */
+	if (reg_base < X1205_CCR_BASE)
+		for (i = 0; i <= 4; i++)
+			buf[i] |= 0x80;
+
+	/* this sequence is required to unlock the chip */
+	xfer = i2c_master_send(client, wel, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
+		return -EIO;
+	}
+
+	xfer = i2c_master_send(client, rwel, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
+		return -EIO;
+	}
+
+	xfer = i2c_master_send(client, rdata, sizeof(rdata));
+	if (xfer != sizeof(rdata)) {
+		dev_err(&client->dev,
+			"%s: result=%d addr=%02x, data=%02x\n",
+			__func__,
+			 xfer, rdata[1], rdata[2]);
+		return -EIO;
+	}
+
+	/* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
+	if (reg_base < X1205_CCR_BASE) {
+		unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
+
+		msleep(10);
+
+		/* ...and set or clear the AL0E bit in the INT register */
+
+		/* Need to set RWEL again as the write has cleared it */
+		xfer = i2c_master_send(client, rwel, 3);
+		if (xfer != 3) {
+			dev_err(&client->dev,
+				"%s: aloe rwel - %d\n",
+				__func__,
+				xfer);
+			return -EIO;
+		}
+
+		if (alm_enable)
+			al0e[2] = X1205_INT_AL0E;
+
+		xfer = i2c_master_send(client, al0e, 3);
+		if (xfer != 3) {
+			dev_err(&client->dev,
+				"%s: al0e - %d\n",
+				__func__,
+				xfer);
+			return -EIO;
+		}
+
+		/* and wait 10msec again for this write to complete */
+		msleep(10);
+	}
+
+	/* disable further writes */
+	xfer = i2c_master_send(client, diswe, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int x1205_fix_osc(struct i2c_client *client)
+{
+	int err;
+	struct rtc_time tm;
+
+	memset(&tm, 0, sizeof(tm));
+
+	err = x1205_set_datetime(client, &tm, X1205_CCR_BASE, 0);
+	if (err < 0)
+		dev_err(&client->dev, "unable to restart the oscillator\n");
+
+	return err;
+}
+
+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+{
+	unsigned char dtr;
+	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+
+	struct i2c_msg msgs[] = {
+		{	/* setup read ptr */
+			.addr = client->addr,
+			.len = 2,
+			.buf = dtr_addr
+		},
+		{      /* read dtr */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = &dtr
+		},
+	};
+
+	/* read dtr register */
+	if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
+
+	*trim = 0;
+
+	if (dtr & X1205_DTR_DTR0)
+		*trim += 20;
+
+	if (dtr & X1205_DTR_DTR1)
+		*trim += 10;
+
+	if (dtr & X1205_DTR_DTR2)
+		*trim = -*trim;
+
+	return 0;
+}
+
+static int x1205_get_atrim(struct i2c_client *client, int *trim)
+{
+	s8 atr;
+	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 2,
+			.buf = atr_addr
+		},
+		{/* read atr */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = &atr
+		},
+	};
+
+	/* read atr register */
+	if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
+
+	/* atr is a two's complement value on 6 bits,
+	 * perform sign extension. The formula is
+	 * Catr = (atr * 0.25pF) + 11.00pF.
+	 */
+	atr = sign_extend32(atr, 5);
+
+	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
+
+	*trim = (atr * 250) + 11000;
+
+	dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
+
+	return 0;
+}
+
+struct x1205_limit {
+	unsigned char reg, mask, min, max;
+};
+
+static int x1205_validate_client(struct i2c_client *client)
+{
+	int i, xfer;
+
+	/* Probe array. We will read the register at the specified
+	 * address and check if the given bits are zero.
+	 */
+	static const unsigned char probe_zero_pattern[] = {
+		/* register, mask */
+		X1205_REG_SR,	0x18,
+		X1205_REG_DTR,	0xF8,
+		X1205_REG_ATR,	0xC0,
+		X1205_REG_INT,	0x18,
+		X1205_REG_0,	0xFF,
+	};
+
+	static const struct x1205_limit probe_limits_pattern[] = {
+		/* register, mask, min, max */
+		{ X1205_REG_Y2K,	0xFF,	19,	20	},
+		{ X1205_REG_DW,		0xFF,	0,	6	},
+		{ X1205_REG_YR,		0xFF,	0,	99	},
+		{ X1205_REG_MO,		0xFF,	0,	12	},
+		{ X1205_REG_DT,		0xFF,	0,	31	},
+		{ X1205_REG_HR,		0x7F,	0,	23	},
+		{ X1205_REG_MN,		0xFF,	0,	59	},
+		{ X1205_REG_SC,		0xFF,	0,	59	},
+		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
+		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
+	};
+
+	/* check that registers have bits a 0 where expected */
+	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
+		unsigned char buf;
+
+		unsigned char addr[2] = { 0, probe_zero_pattern[i] };
+
+		struct i2c_msg msgs[2] = {
+			{
+				.addr = client->addr,
+				.len = 2,
+				.buf = addr
+			},
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &buf
+			},
+		};
+
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+		if (xfer != 2) {
+			dev_err(&client->dev,
+				"%s: could not read register %x\n",
+				__func__, probe_zero_pattern[i]);
+
+			return -EIO;
+		}
+
+		if ((buf & probe_zero_pattern[i+1]) != 0) {
+			dev_err(&client->dev,
+				"%s: register=%02x, zero pattern=%d, value=%x\n",
+				__func__, probe_zero_pattern[i], i, buf);
+
+			return -ENODEV;
+		}
+	}
+
+	/* check limits (only registers with bcd values) */
+	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+		unsigned char reg, value;
+
+		unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
+
+		struct i2c_msg msgs[2] = {
+			{
+				.addr = client->addr,
+				.len = 2,
+				.buf = addr
+			},
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &reg
+			},
+		};
+
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+		if (xfer != 2) {
+			dev_err(&client->dev,
+				"%s: could not read register %x\n",
+				__func__, probe_limits_pattern[i].reg);
+
+			return -EIO;
+		}
+
+		value = bcd2bin(reg & probe_limits_pattern[i].mask);
+
+		if (value > probe_limits_pattern[i].max ||
+			value < probe_limits_pattern[i].min) {
+			dev_dbg(&client->dev,
+				"%s: register=%x, lim pattern=%d, value=%d\n",
+				__func__, probe_limits_pattern[i].reg,
+				i, value);
+
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int err;
+	unsigned char intreg, status;
+	static unsigned char int_addr[2] = { 0, X1205_REG_INT };
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_msg msgs[] = {
+		{ /* setup read ptr */
+			.addr = client->addr,
+			.len = 2,
+			.buf = int_addr
+		},
+		{/* read INT register */
+
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = &intreg
+		},
+	};
+
+	/* read interrupt register and status register */
+	if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+	err = x1205_get_status(client, &status);
+	if (err == 0) {
+		alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
+		alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
+		err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
+	}
+	return err;
+}
+
+static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	return x1205_set_datetime(to_i2c_client(dev),
+		&alrm->time, X1205_ALM0_BASE, alrm->enabled);
+}
+
+static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return x1205_get_datetime(to_i2c_client(dev),
+		tm, X1205_CCR_BASE);
+}
+
+static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return x1205_set_datetime(to_i2c_client(dev),
+		tm, X1205_CCR_BASE, 0);
+}
+
+static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	int err, dtrim, atrim;
+
+	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
+	if (!err)
+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
+
+	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
+	if (!err)
+		seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
+			atrim / 1000, atrim % 1000);
+	return 0;
+}
+
+static const struct rtc_class_ops x1205_rtc_ops = {
+	.proc		= x1205_rtc_proc,
+	.read_time	= x1205_rtc_read_time,
+	.set_time	= x1205_rtc_set_time,
+	.read_alarm	= x1205_rtc_read_alarm,
+	.set_alarm	= x1205_rtc_set_alarm,
+};
+
+static ssize_t x1205_sysfs_show_atrim(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int err, atrim;
+
+	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
+}
+static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
+
+static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int err, dtrim;
+
+	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d ppm\n", dtrim);
+}
+static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
+
+static int x1205_sysfs_register(struct device *dev)
+{
+	int err;
+
+	err = device_create_file(dev, &dev_attr_atrim);
+	if (err)
+		return err;
+
+	err = device_create_file(dev, &dev_attr_dtrim);
+	if (err)
+		device_remove_file(dev, &dev_attr_atrim);
+
+	return err;
+}
+
+static void x1205_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_dtrim);
+}
+
+
+static int x1205_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int err = 0;
+	unsigned char sr;
+	struct rtc_device *rtc;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	if (x1205_validate_client(client) < 0)
+		return -ENODEV;
+
+	rtc = devm_rtc_device_register(&client->dev, x1205_driver.driver.name,
+					&x1205_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	/* Check for power failures and eventually enable the osc */
+	err = x1205_get_status(client, &sr);
+	if (!err) {
+		if (sr & X1205_SR_RTCF) {
+			dev_err(&client->dev,
+				"power failure detected, "
+				"please set the clock\n");
+			udelay(50);
+			x1205_fix_osc(client);
+		}
+	} else {
+		dev_err(&client->dev, "couldn't read status\n");
+	}
+
+	err = x1205_sysfs_register(&client->dev);
+	if (err)
+		dev_err(&client->dev, "Unable to create sysfs entries\n");
+
+	return 0;
+}
+
+static int x1205_remove(struct i2c_client *client)
+{
+	x1205_sysfs_unregister(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id x1205_id[] = {
+	{ "x1205", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, x1205_id);
+
+static struct i2c_driver x1205_driver = {
+	.driver		= {
+		.name	= "rtc-x1205",
+	},
+	.probe		= x1205_probe,
+	.remove		= x1205_remove,
+	.id_table	= x1205_id,
+};
+
+module_i2c_driver(x1205_driver);
+
+MODULE_AUTHOR(
+	"Karen Spearel <kas111 at gmail dot com>, "
+	"Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-xgene.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-xgene.c
new file mode 100644
index 0000000..f68f842
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-xgene.c
@@ -0,0 +1,281 @@
+/*
+ * APM X-Gene SoC Real Time Clock Driver
+ *
+ * Copyright (c) 2014, Applied Micro Circuits Corporation
+ * Author: Rameshwar Prasad Sahu <rsahu@apm.com>
+ *         Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+
+/* RTC CSR Registers */
+#define RTC_CCVR		0x00
+#define RTC_CMR			0x04
+#define RTC_CLR			0x08
+#define RTC_CCR			0x0C
+#define  RTC_CCR_IE		BIT(0)
+#define  RTC_CCR_MASK		BIT(1)
+#define  RTC_CCR_EN		BIT(2)
+#define  RTC_CCR_WEN		BIT(3)
+#define RTC_STAT		0x10
+#define  RTC_STAT_BIT		BIT(0)
+#define RTC_RSTAT		0x14
+#define RTC_EOI			0x18
+#define RTC_VER			0x1C
+
+struct xgene_rtc_dev {
+	struct rtc_device *rtc;
+	struct device *dev;
+	unsigned long alarm_time;
+	void __iomem *csr_base;
+	struct clk *clk;
+	unsigned int irq_wake;
+};
+
+static int xgene_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(readl(pdata->csr_base + RTC_CCVR), tm);
+	return rtc_valid_tm(tm);
+}
+
+static int xgene_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+
+	/*
+	 * NOTE: After the following write, the RTC_CCVR is only reflected
+	 *       after the update cycle of 1 seconds.
+	 */
+	writel((u32) secs, pdata->csr_base + RTC_CLR);
+	readl(pdata->csr_base + RTC_CLR); /* Force a barrier */
+
+	return 0;
+}
+
+static int xgene_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+
+	rtc_time_to_tm(pdata->alarm_time, &alrm->time);
+	alrm->enabled = readl(pdata->csr_base + RTC_CCR) & RTC_CCR_IE;
+
+	return 0;
+}
+
+static int xgene_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
+{
+	struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+	u32 ccr;
+
+	ccr = readl(pdata->csr_base + RTC_CCR);
+	if (enabled) {
+		ccr &= ~RTC_CCR_MASK;
+		ccr |= RTC_CCR_IE;
+	} else {
+		ccr &= ~RTC_CCR_IE;
+		ccr |= RTC_CCR_MASK;
+	}
+	writel(ccr, pdata->csr_base + RTC_CCR);
+
+	return 0;
+}
+
+static int xgene_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+	unsigned long rtc_time;
+	unsigned long alarm_time;
+
+	rtc_time = readl(pdata->csr_base + RTC_CCVR);
+	rtc_tm_to_time(&alrm->time, &alarm_time);
+
+	pdata->alarm_time = alarm_time;
+	writel((u32) pdata->alarm_time, pdata->csr_base + RTC_CMR);
+
+	xgene_rtc_alarm_irq_enable(dev, alrm->enabled);
+
+	return 0;
+}
+
+static const struct rtc_class_ops xgene_rtc_ops = {
+	.read_time	= xgene_rtc_read_time,
+	.set_mmss	= xgene_rtc_set_mmss,
+	.read_alarm	= xgene_rtc_read_alarm,
+	.set_alarm	= xgene_rtc_set_alarm,
+	.alarm_irq_enable = xgene_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t xgene_rtc_interrupt(int irq, void *id)
+{
+	struct xgene_rtc_dev *pdata = (struct xgene_rtc_dev *) id;
+
+	/* Check if interrupt asserted */
+	if (!(readl(pdata->csr_base + RTC_STAT) & RTC_STAT_BIT))
+		return IRQ_NONE;
+
+	/* Clear interrupt */
+	readl(pdata->csr_base + RTC_EOI);
+
+	rtc_update_irq(pdata->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int xgene_rtc_probe(struct platform_device *pdev)
+{
+	struct xgene_rtc_dev *pdata;
+	struct resource *res;
+	int ret;
+	int irq;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pdata);
+	pdata->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdata->csr_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->csr_base))
+		return PTR_ERR(pdata->csr_base);
+
+	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(pdata->rtc))
+		return PTR_ERR(pdata->rtc);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		return irq;
+	}
+	ret = devm_request_irq(&pdev->dev, irq, xgene_rtc_interrupt, 0,
+			       dev_name(&pdev->dev), pdata);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	pdata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pdata->clk)) {
+		dev_err(&pdev->dev, "Couldn't get the clock for RTC\n");
+		return -ENODEV;
+	}
+	clk_prepare_enable(pdata->clk);
+
+	/* Turn on the clock and the crystal */
+	writel(RTC_CCR_EN, pdata->csr_base + RTC_CCR);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* HW does not support update faster than 1 seconds */
+	pdata->rtc->uie_unsupported = 1;
+	pdata->rtc->ops = &xgene_rtc_ops;
+
+	ret = rtc_register_device(pdata->rtc);
+	if (ret) {
+		clk_disable_unprepare(pdata->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int xgene_rtc_remove(struct platform_device *pdev)
+{
+	struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev);
+
+	xgene_rtc_alarm_irq_enable(&pdev->dev, 0);
+	device_init_wakeup(&pdev->dev, 0);
+	clk_disable_unprepare(pdata->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int xgene_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev);
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (device_may_wakeup(&pdev->dev)) {
+		if (!enable_irq_wake(irq))
+			pdata->irq_wake = 1;
+	} else {
+		xgene_rtc_alarm_irq_enable(dev, 0);
+		clk_disable(pdata->clk);
+	}
+
+	return 0;
+}
+
+static int xgene_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev);
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (device_may_wakeup(&pdev->dev)) {
+		if (pdata->irq_wake) {
+			disable_irq_wake(irq);
+			pdata->irq_wake = 0;
+		}
+	} else {
+		clk_enable(pdata->clk);
+		xgene_rtc_alarm_irq_enable(dev, 1);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(xgene_rtc_pm_ops, xgene_rtc_suspend, xgene_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id xgene_rtc_of_match[] = {
+	{.compatible = "apm,xgene-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, xgene_rtc_of_match);
+#endif
+
+static struct platform_driver xgene_rtc_driver = {
+	.probe		= xgene_rtc_probe,
+	.remove		= xgene_rtc_remove,
+	.driver		= {
+		.name	= "xgene-rtc",
+		.pm = &xgene_rtc_pm_ops,
+		.of_match_table	= of_match_ptr(xgene_rtc_of_match),
+	},
+};
+
+module_platform_driver(xgene_rtc_driver);
+
+MODULE_DESCRIPTION("APM X-Gene SoC RTC driver");
+MODULE_AUTHOR("Rameshwar Sahu <rsahu@apm.com>");
+MODULE_LICENSE("GPL");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/rtc-zynqmp.c b/src/kernel/linux/v4.14/drivers/rtc/rtc-zynqmp.c
new file mode 100644
index 0000000..da18a8a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/rtc-zynqmp.c
@@ -0,0 +1,327 @@
+/*
+ * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
+ *
+ * Copyright (C) 2015 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* RTC Registers */
+#define RTC_SET_TM_WR		0x00
+#define RTC_SET_TM_RD		0x04
+#define RTC_CALIB_WR		0x08
+#define RTC_CALIB_RD		0x0C
+#define RTC_CUR_TM		0x10
+#define RTC_CUR_TICK		0x14
+#define RTC_ALRM		0x18
+#define RTC_INT_STS		0x20
+#define RTC_INT_MASK		0x24
+#define RTC_INT_EN		0x28
+#define RTC_INT_DIS		0x2C
+#define RTC_CTRL		0x40
+
+#define RTC_FR_EN		BIT(20)
+#define RTC_FR_DATSHIFT		16
+#define RTC_TICK_MASK		0xFFFF
+#define RTC_INT_SEC		BIT(0)
+#define RTC_INT_ALRM		BIT(1)
+#define RTC_OSC_EN		BIT(24)
+#define RTC_BATT_EN		BIT(31)
+
+#define RTC_CALIB_DEF		0x198233
+#define RTC_CALIB_MASK		0x1FFFFF
+#define RTC_SEC_MAX_VAL		0xFFFFFFFF
+
+struct xlnx_rtc_dev {
+	struct rtc_device	*rtc;
+	void __iomem		*reg_base;
+	int			alarm_irq;
+	int			sec_irq;
+	int			calibval;
+};
+
+static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+	unsigned long new_time;
+
+	/*
+	 * The value written will be updated after 1 sec into the
+	 * seconds read register, so we need to program time +1 sec
+	 * to get the correct time on read.
+	 */
+	new_time = rtc_tm_to_time64(tm) + 1;
+
+	if (new_time > RTC_SEC_MAX_VAL)
+		return -EINVAL;
+
+	/*
+	 * Writing into calibration register will clear the Tick Counter and
+	 * force the next second to be signaled exactly in 1 second period
+	 */
+	xrtcdev->calibval &= RTC_CALIB_MASK;
+	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+
+	writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
+
+	/*
+	 * Clear the rtc interrupt status register after setting the
+	 * time. During a read_time function, the code should read the
+	 * RTC_INT_STATUS register and if bit 0 is still 0, it means
+	 * that one second has not elapsed yet since RTC was set and
+	 * the current time should be read from SET_TIME_READ register;
+	 * otherwise, CURRENT_TIME register is read to report the time
+	 */
+	writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
+
+	return 0;
+}
+
+static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	u32 status;
+	unsigned long read_time;
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+	status = readl(xrtcdev->reg_base + RTC_INT_STS);
+
+	if (status & RTC_INT_SEC) {
+		/*
+		 * RTC has updated the CURRENT_TIME with the time written into
+		 * SET_TIME_WRITE register.
+		 */
+		rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
+	} else {
+		/*
+		 * Time written in SET_TIME_WRITE has not yet updated into
+		 * the seconds read register, so read the time from the
+		 * SET_TIME_WRITE instead of CURRENT_TIME register.
+		 * Since we add +1 sec while writing, we need to -1 sec while
+		 * reading.
+		 */
+		read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
+		rtc_time64_to_tm(read_time, tm);
+	}
+
+	return rtc_valid_tm(tm);
+}
+
+static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+	rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
+	alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
+
+	return 0;
+}
+
+static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+	if (enabled)
+		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
+	else
+		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
+
+	return 0;
+}
+
+static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+	unsigned long alarm_time;
+
+	alarm_time = rtc_tm_to_time64(&alrm->time);
+
+	if (alarm_time > RTC_SEC_MAX_VAL)
+		return -EINVAL;
+
+	writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
+
+	xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
+
+	return 0;
+}
+
+static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
+{
+	u32 rtc_ctrl;
+
+	/* Enable RTC switch to battery when VCC_PSAUX is not available */
+	rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
+	rtc_ctrl |= RTC_BATT_EN;
+	writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
+
+	/*
+	 * Based on crystal freq of 33.330 KHz
+	 * set the seconds counter and enable, set fractions counter
+	 * to default value suggested as per design spec
+	 * to correct RTC delay in frequency over period of time.
+	 */
+	xrtcdev->calibval &= RTC_CALIB_MASK;
+	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+}
+
+static const struct rtc_class_ops xlnx_rtc_ops = {
+	.set_time	  = xlnx_rtc_set_time,
+	.read_time	  = xlnx_rtc_read_time,
+	.read_alarm	  = xlnx_rtc_read_alarm,
+	.set_alarm	  = xlnx_rtc_set_alarm,
+	.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
+{
+	struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
+	unsigned int status;
+
+	status = readl(xrtcdev->reg_base + RTC_INT_STS);
+	/* Check if interrupt asserted */
+	if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
+		return IRQ_NONE;
+
+	/* Clear RTC_INT_ALRM interrupt only */
+	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
+
+	if (status & RTC_INT_ALRM)
+		rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int xlnx_rtc_probe(struct platform_device *pdev)
+{
+	struct xlnx_rtc_dev *xrtcdev;
+	struct resource *res;
+	int ret;
+
+	xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
+	if (!xrtcdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, xrtcdev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xrtcdev->reg_base))
+		return PTR_ERR(xrtcdev->reg_base);
+
+	xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
+	if (xrtcdev->alarm_irq < 0) {
+		dev_err(&pdev->dev, "no irq resource\n");
+		return xrtcdev->alarm_irq;
+	}
+	ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
+			       xlnx_rtc_interrupt, 0,
+			       dev_name(&pdev->dev), xrtcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed\n");
+		return ret;
+	}
+
+	xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
+	if (xrtcdev->sec_irq < 0) {
+		dev_err(&pdev->dev, "no irq resource\n");
+		return xrtcdev->sec_irq;
+	}
+	ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
+			       xlnx_rtc_interrupt, 0,
+			       dev_name(&pdev->dev), xrtcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "calibration",
+				   &xrtcdev->calibval);
+	if (ret)
+		xrtcdev->calibval = RTC_CALIB_DEF;
+
+	xlnx_init_rtc(xrtcdev);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					 &xlnx_rtc_ops, THIS_MODULE);
+	return PTR_ERR_OR_ZERO(xrtcdev->rtc);
+}
+
+static int xlnx_rtc_remove(struct platform_device *pdev)
+{
+	xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(xrtcdev->alarm_irq);
+	else
+		xlnx_rtc_alarm_irq_enable(dev, 0);
+
+	return 0;
+}
+
+static int __maybe_unused xlnx_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(xrtcdev->alarm_irq);
+	else
+		xlnx_rtc_alarm_irq_enable(dev, 1);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
+
+static const struct of_device_id xlnx_rtc_of_match[] = {
+	{.compatible = "xlnx,zynqmp-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
+
+static struct platform_driver xlnx_rtc_driver = {
+	.probe		= xlnx_rtc_probe,
+	.remove		= xlnx_rtc_remove,
+	.driver		= {
+		.name	= KBUILD_MODNAME,
+		.pm	= &xlnx_rtc_pm_ops,
+		.of_match_table	= xlnx_rtc_of_match,
+	},
+};
+
+module_platform_driver(xlnx_rtc_driver);
+
+MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");
diff --git a/src/kernel/linux/v4.14/drivers/rtc/systohc.c b/src/kernel/linux/v4.14/drivers/rtc/systohc.c
new file mode 100644
index 0000000..b4a68ff
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/rtc/systohc.c
@@ -0,0 +1,47 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+#include <linux/rtc.h>
+#include <linux/time.h>
+
+/**
+ * rtc_set_ntp_time - Save NTP synchronized time to the RTC
+ * @now: Current time of day
+ *
+ * Replacement for the NTP platform function update_persistent_clock64
+ * that stores time for later retrieval by rtc_hctosys.
+ *
+ * Returns 0 on successful RTC update, -ENODEV if a RTC update is not
+ * possible at all, and various other -errno for specific temporary failure
+ * cases.
+ *
+ * If temporary failure is indicated the caller should try again 'soon'
+ */
+int rtc_set_ntp_time(struct timespec64 now)
+{
+	struct rtc_device *rtc;
+	struct rtc_time tm;
+	int err = -ENODEV;
+
+	if (now.tv_nsec < (NSEC_PER_SEC >> 1))
+		rtc_time64_to_tm(now.tv_sec, &tm);
+	else
+		rtc_time64_to_tm(now.tv_sec + 1, &tm);
+
+	rtc = rtc_class_open(CONFIG_RTC_SYSTOHC_DEVICE);
+	if (rtc) {
+		/* rtc_hctosys exclusively uses UTC, so we call set_time here,
+		 * not set_mmss. */
+		if (rtc->ops &&
+		    (rtc->ops->set_time ||
+		     rtc->ops->set_mmss64 ||
+		     rtc->ops->set_mmss))
+			err = rtc_set_time(rtc, &tm);
+		rtc_class_close(rtc);
+	}
+
+	return err;
+}