[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/scsi/ufs/ufs-qcom.c b/src/kernel/linux/v4.14/drivers/scsi/ufs/ufs-qcom.c
new file mode 100644
index 0000000..ee3589a
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/scsi/ufs/ufs-qcom.c
@@ -0,0 +1,1741 @@
+/*
+ * Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-qcom-ufs.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-qcom.h"
+#include "ufshci.h"
+#include "ufs_quirks.h"
+#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
+ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+enum {
+ TSTBUS_UAWM,
+ TSTBUS_UARM,
+ TSTBUS_TXUC,
+ TSTBUS_RXUC,
+ TSTBUS_DFC,
+ TSTBUS_TRLUT,
+ TSTBUS_TMRLUT,
+ TSTBUS_OCSC,
+ TSTBUS_UTP_HCI,
+ TSTBUS_COMBINED,
+ TSTBUS_WRAPPER,
+ TSTBUS_UNIPRO,
+ TSTBUS_MAX,
+};
+
+static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles);
+
+static void ufs_qcom_dump_regs(struct ufs_hba *hba, int offset, int len,
+ char *prefix)
+{
+ print_hex_dump(KERN_ERR, prefix,
+ len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,
+ 16, 4, (void __force *)hba->mmio_base + offset,
+ len * 4, false);
+}
+
+static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len,
+ char *prefix, void *priv)
+{
+ ufs_qcom_dump_regs(hba, offset, len, prefix);
+}
+
+static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
+{
+ int err = 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_get(struct device *dev,
+ const char *name, struct clk **clk_out)
+{
+ struct clk *clk;
+ int err = 0;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ dev_err(dev, "%s: failed to get %s err %d",
+ __func__, name, err);
+ } else {
+ *clk_out = clk;
+ }
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_enable(struct device *dev,
+ const char *name, struct clk *clk)
+{
+ int err = 0;
+
+ err = clk_prepare_enable(clk);
+ if (err)
+ dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err);
+
+ return err;
+}
+
+static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
+{
+ if (!host->is_lane_clks_enabled)
+ return;
+
+ if (host->hba->lanes_per_direction > 1)
+ clk_disable_unprepare(host->tx_l1_sync_clk);
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+ if (host->hba->lanes_per_direction > 1)
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+
+ host->is_lane_clks_enabled = false;
+}
+
+static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ if (host->is_lane_clks_enabled)
+ return 0;
+
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk",
+ host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk",
+ host->tx_l0_sync_clk);
+ if (err)
+ goto disable_rx_l0;
+
+ if (host->hba->lanes_per_direction > 1) {
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
+ host->rx_l1_sync_clk);
+ if (err)
+ goto disable_tx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
+ host->tx_l1_sync_clk);
+ if (err)
+ goto disable_rx_l1;
+ }
+
+ host->is_lane_clks_enabled = true;
+ goto out;
+
+disable_rx_l1:
+ if (host->hba->lanes_per_direction > 1)
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+disable_tx_l0:
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+disable_rx_l0:
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "rx_lane0_sync_clk", &host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev,
+ "tx_lane0_sync_clk", &host->tx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ /* In case of single lane per direction, don't read lane1 clocks */
+ if (host->hba->lanes_per_direction > 1) {
+ err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
+ &host->rx_l1_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
+ &host->tx_l1_sync_clk);
+ }
+out:
+ return err;
+}
+
+static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ u32 tx_lanes;
+ int err = 0;
+
+ err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
+ __func__);
+
+out:
+ return err;
+}
+
+static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
+{
+ int err;
+ u32 tx_fsm_val = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
+ if (err || tx_fsm_val == TX_FSM_HIBERN8)
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout))
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val != TX_FSM_HIBERN8) {
+ err = tx_fsm_val;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
+ __func__, err);
+ }
+
+ return err;
+}
+
+static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
+{
+ ufshcd_rmwl(host->hba, QUNIPRO_SEL,
+ ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
+ REG_UFS_CFG1);
+ /* make sure above configuration is applied before we return */
+ mb();
+}
+
+static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+ bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
+ ? true : false;
+
+ /* Assert PHY reset and apply PHY calibration values */
+ ufs_qcom_assert_reset(hba);
+ /* provide 1ms delay to let the reset pulse propagate */
+ usleep_range(1000, 1100);
+
+ ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /* De-assert PHY reset and start serdes */
+ ufs_qcom_deassert_reset(hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+ ret = ufs_qcom_phy_start_serdes(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = ufs_qcom_phy_is_pcs_ready(phy);
+ if (ret)
+ dev_err(hba->dev,
+ "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+ __func__, ret);
+
+ ufs_qcom_select_unipro_mode(host);
+
+out:
+ return ret;
+}
+
+/*
+ * The UTP controller has a number of internal clock gating cells (CGCs).
+ * Internal hardware sub-modules within the UTP controller control the CGCs.
+ * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
+ * in a specific operation, UTP controller CGCs are by default disabled and
+ * this function enables them (after every UFS link startup) to save some power
+ * leakage.
+ */
+static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba,
+ ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL,
+ REG_UFS_CFG2);
+
+ /* Ensure that HW clock gating is enabled before next operations */
+ mb();
+}
+
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_power_up_sequence(hba);
+ /*
+ * The PHY PLL output is the source of tx/rx lane symbol
+ * clocks, hence, enable the lane clocks only after PHY
+ * is initialized.
+ */
+ err = ufs_qcom_enable_lane_clks(host);
+ break;
+ case POST_CHANGE:
+ /* check if UFS PHY moved from DISABLED to HIBERN8 */
+ err = ufs_qcom_check_hibern8(hba);
+ ufs_qcom_enable_hw_clk_gating(hba);
+
+ break;
+ default:
+ dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+/**
+ * Returns zero for success and non-zero in case of a failure
+ */
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+ u32 hs, u32 rate, bool update_link_startup_timer)
+{
+ int ret = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_clk_info *clki;
+ u32 core_clk_period_in_ns;
+ u32 tx_clk_cycles_per_us = 0;
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_us = 0;
+
+ static u32 pwm_fr_table[][2] = {
+ {UFS_PWM_G1, 0x1},
+ {UFS_PWM_G2, 0x1},
+ {UFS_PWM_G3, 0x1},
+ {UFS_PWM_G4, 0x1},
+ };
+
+ static u32 hs_fr_table_rA[][2] = {
+ {UFS_HS_G1, 0x1F},
+ {UFS_HS_G2, 0x3e},
+ {UFS_HS_G3, 0x7D},
+ };
+
+ static u32 hs_fr_table_rB[][2] = {
+ {UFS_HS_G1, 0x24},
+ {UFS_HS_G2, 0x49},
+ {UFS_HS_G3, 0x92},
+ };
+
+ /*
+ * The Qunipro controller does not use following registers:
+ * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
+ * UFS_REG_PA_LINK_STARTUP_TIMER
+ * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
+ * Aggregation logic.
+ */
+ if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+ goto out;
+
+ if (gear == 0) {
+ dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
+ goto out_error;
+ }
+
+ list_for_each_entry(clki, &hba->clk_list_head, list) {
+ if (!strcmp(clki->name, "core_clk"))
+ core_clk_rate = clk_get_rate(clki->clk);
+ }
+
+ /* If frequency is smaller than 1MHz, set to 1MHz */
+ if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
+ core_clk_rate = DEFAULT_CLK_RATE_HZ;
+
+ core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+ if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ goto out;
+
+ core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
+ core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
+ core_clk_period_in_ns &= MASK_CLK_NS_REG;
+
+ switch (hs) {
+ case FASTAUTO_MODE:
+ case FAST_MODE:
+ if (rate == PA_HS_MODE_A) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rA));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
+ } else if (rate == PA_HS_MODE_B) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rB));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
+ } else {
+ dev_err(hba->dev, "%s: invalid rate = %d\n",
+ __func__, rate);
+ goto out_error;
+ }
+ break;
+ case SLOWAUTO_MODE:
+ case SLOW_MODE:
+ if (gear > ARRAY_SIZE(pwm_fr_table)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(pwm_fr_table));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
+ break;
+ case UNCHANGED:
+ default:
+ dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
+ goto out_error;
+ }
+
+ if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
+ (core_clk_period_in_ns | tx_clk_cycles_per_us)) {
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+ REG_UFS_TX_SYMBOL_CLK_NS_US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (update_link_startup_timer) {
+ ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ /*
+ * make sure that this configuration is applied before
+ * we return
+ */
+ mb();
+ }
+ goto out;
+
+out_error:
+ ret = -EINVAL;
+out:
+ return ret;
+}
+
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ switch (status) {
+ case PRE_CHANGE:
+ if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
+ 0, true)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ /*
+ * set unipro core clock cycles to 150 & clear clock
+ * divider
+ */
+ err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
+ 150);
+
+ /*
+ * Some UFS devices (and may be host) have issues if LCC is
+ * enabled. So we are setting PA_Local_TX_LCC_Enable to 0
+ * before link startup which will make sure that both host
+ * and device TX LCC are disabled once link startup is
+ * completed.
+ */
+ if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE),
+ 0);
+
+ break;
+ case POST_CHANGE:
+ ufs_qcom_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+out:
+ return err;
+}
+
+static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+
+ if (ufs_qcom_is_link_off(hba)) {
+ /*
+ * Disable the tx/rx lane symbol clocks before PHY is
+ * powered down as the PLL source should be disabled
+ * after downstream clocks are disabled.
+ */
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(phy);
+
+ /* Assert PHY soft reset */
+ ufs_qcom_assert_reset(hba);
+ goto out;
+ }
+
+ /*
+ * If UniPro link is not active, PHY ref_clk, main PHY analog power
+ * rail and low noise analog power rail for PLL can be switched off.
+ */
+ if (!ufs_qcom_is_link_active(hba)) {
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(phy);
+ }
+
+out:
+ return ret;
+}
+
+static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int err;
+
+ err = phy_power_on(phy);
+ if (err) {
+ dev_err(hba->dev, "%s: failed enabling regs, err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ goto out;
+
+ hba->is_sys_suspended = false;
+
+out:
+ return err;
+}
+
+struct ufs_qcom_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_qcom_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_qcom_max_hs = false;
+
+ if (dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (qcom_param->desired_working_mode == FAST) {
+ is_qcom_max_hs = true;
+ min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
+ qcom_param->hs_tx_gear);
+ } else {
+ min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
+ qcom_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but qcom_param->desired_working_mode is
+ * HS, thus device and qcom_param don't agree
+ */
+ if (!is_dev_sup_hs && is_qcom_max_hs) {
+ pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n",
+ __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_qcom_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since qcom_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to qcom_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_hs;
+ } else {
+ /*
+ * here qcom_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases qcom_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ qcom_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+ qcom_param->tx_lanes);
+ agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+ qcom_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_qcom_max_hs) ||
+ (!is_dev_sup_hs && !is_qcom_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_qcom_gear);
+ else if (!is_dev_sup_hs)
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
+
+ agreed_pwr->hs_rate = qcom_param->hs_rate;
+ return 0;
+}
+
+#ifdef CONFIG_MSM_BUS_SCALING
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+ const char *speed_mode)
+{
+ struct device *dev = host->hba->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+ const char *key = "qcom,bus-vector-names";
+
+ if (!speed_mode) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+ err = of_property_match_string(np, key, "MAX");
+ else
+ err = of_property_match_string(np, key, speed_mode);
+
+out:
+ if (err < 0)
+ dev_err(dev, "%s: Invalid %s mode %d\n",
+ __func__, speed_mode, err);
+ return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+ int gear = max_t(u32, p->gear_rx, p->gear_tx);
+ int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+ int pwr;
+
+ /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+ if (!gear)
+ gear = 1;
+
+ if (!lanes)
+ lanes = 1;
+
+ if (!p->pwr_rx && !p->pwr_tx) {
+ pwr = SLOWAUTO_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+ } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+ p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+ pwr = FAST_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+ p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+ } else {
+ pwr = SLOW_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+ "PWM", gear, lanes);
+ }
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ int err = 0;
+
+ if (vote != host->bus_vote.curr_vote) {
+ err = msm_bus_scale_client_update_request(
+ host->bus_vote.client_handle, vote);
+ if (err) {
+ dev_err(host->hba->dev,
+ "%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n",
+ __func__, host->bus_vote.client_handle,
+ vote, err);
+ goto out;
+ }
+
+ host->bus_vote.curr_vote = vote;
+ }
+out:
+ return err;
+}
+
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+ int vote;
+ int err = 0;
+ char mode[BUS_VECTOR_NAME_LEN];
+
+ ufs_qcom_get_speed_mode(&host->dev_req_params, mode);
+
+ vote = ufs_qcom_get_bus_vote(host, mode);
+ if (vote >= 0)
+ err = ufs_qcom_set_bus_vote(host, vote);
+ else
+ err = vote;
+
+ if (err)
+ dev_err(host->hba->dev, "%s: failed %d\n", __func__, err);
+ else
+ host->bus_vote.saved_vote = vote;
+ return err;
+}
+
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ uint32_t value;
+
+ if (!kstrtou32(buf, 0, &value)) {
+ host->bus_vote.is_max_bw_needed = !!value;
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+ return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ int err;
+ struct msm_bus_scale_pdata *bus_pdata;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *np = dev->of_node;
+
+ bus_pdata = msm_bus_cl_get_pdata(pdev);
+ if (!bus_pdata) {
+ dev_err(dev, "%s: failed to get bus vectors\n", __func__);
+ err = -ENODATA;
+ goto out;
+ }
+
+ err = of_property_count_strings(np, "qcom,bus-vector-names");
+ if (err < 0 || err != bus_pdata->num_usecases) {
+ dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata);
+ if (!host->bus_vote.client_handle) {
+ dev_err(dev, "%s: msm_bus_scale_register_client failed\n",
+ __func__);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* cache the vote index for minimum and maximum bandwidth */
+ host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+ host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+ host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+ host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+ sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+ host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+ host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+ err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+ return err;
+}
+#else /* CONFIG_MSM_BUS_SCALING */
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ return 0;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+#endif /* CONFIG_MSM_BUS_SCALING */
+
+static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
+{
+ if (host->dev_ref_clk_ctrl_mmio &&
+ (enable ^ host->is_dev_ref_clk_enabled)) {
+ u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
+
+ if (enable)
+ temp |= host->dev_ref_clk_en_mask;
+ else
+ temp &= ~host->dev_ref_clk_en_mask;
+
+ /*
+ * If we are here to disable this clock it might be immediately
+ * after entering into hibern8 in which case we need to make
+ * sure that device ref_clk is active at least 1us after the
+ * hibern8 enter.
+ */
+ if (!enable)
+ udelay(1);
+
+ writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
+
+ /* ensure that ref_clk is enabled/disabled before we return */
+ wmb();
+
+ /*
+ * If we call hibern8 exit after this, we need to make sure that
+ * device ref_clk is stable for at least 1us before the hibern8
+ * exit command.
+ */
+ if (enable)
+ udelay(1);
+
+ host->is_dev_ref_clk_enabled = enable;
+ }
+}
+
+static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ u32 val;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ struct ufs_qcom_dev_params ufs_qcom_cap;
+ int ret = 0;
+ int res = 0;
+
+ if (!dev_req_params) {
+ pr_err("%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX;
+ ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX;
+ ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX;
+ ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX;
+ ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX;
+ ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX;
+ ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM;
+ ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM;
+ ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS;
+ ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS;
+ ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+ ufs_qcom_cap.desired_working_mode =
+ UFS_QCOM_LIMIT_DESIRED_MODE;
+
+ if (host->hw_ver.major == 0x1) {
+ /*
+ * HS-G3 operations may not reliably work on legacy QCOM
+ * UFS host controller hardware even though capability
+ * exchange during link startup phase may end up
+ * negotiating maximum supported gear as G3.
+ * Hence downgrade the maximum supported gear to HS-G2.
+ */
+ if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
+ if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
+ }
+
+ ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
+ dev_max_params,
+ dev_req_params);
+ if (ret) {
+ pr_err("%s: failed to determine capabilities\n",
+ __func__);
+ goto out;
+ }
+
+ /* enable the device ref clock before changing to HS mode */
+ if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
+ ufshcd_is_hs_mode(dev_req_params))
+ ufs_qcom_dev_ref_clk_ctrl(host, true);
+ break;
+ case POST_CHANGE:
+ if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate, false)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ /*
+ * we return error code at the end of the routine,
+ * but continue to configure UFS_PHY_TX_LANE_ENABLE
+ * and bus voting as usual
+ */
+ ret = -EINVAL;
+ }
+
+ val = ~(MAX_U32 << dev_req_params->lane_tx);
+ res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
+ if (res) {
+ dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
+ __func__, res);
+ ret = res;
+ }
+
+ /* cache the power mode parameters to use internally */
+ memcpy(&host->dev_req_params,
+ dev_req_params, sizeof(*dev_req_params));
+ ufs_qcom_update_bus_bw_vote(host);
+
+ /* disable the device ref clock if entered PWM mode */
+ if (ufshcd_is_hs_mode(&hba->pwr_info) &&
+ !ufshcd_is_hs_mode(dev_req_params))
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
+{
+ int err;
+ u32 pa_vs_config_reg1;
+
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ &pa_vs_config_reg1);
+ if (err)
+ goto out;
+
+ /* Allow extension of MSB bits of PA_SaveConfigTime attribute */
+ err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ (pa_vs_config_reg1 | (1 << 12)));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
+{
+ int err = 0;
+
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
+ err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
+
+ return err;
+}
+
+static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (host->hw_ver.major == 0x1)
+ return UFSHCI_VERSION_11;
+ else
+ return UFSHCI_VERSION_20;
+}
+
+/**
+ * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
+ * @hba: host controller instance
+ *
+ * QCOM UFS host controller might have some non standard behaviours (quirks)
+ * than what is specified by UFSHCI specification. Advertise all such
+ * quirks to standard UFS host controller driver so standard takes them into
+ * account.
+ */
+static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (host->hw_ver.major == 0x01) {
+ hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
+ | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE;
+
+ if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
+ }
+
+ if (host->hw_ver.major == 0x2) {
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ /* Legacy UniPro mode still need following quirks */
+ hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP);
+ }
+}
+
+static void ufs_qcom_set_caps(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+ hba->caps |= UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+
+ if (host->hw_ver.major >= 0x2) {
+ host->caps = UFS_QCOM_CAP_QUNIPRO |
+ UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
+ }
+}
+
+/**
+ * ufs_qcom_setup_clocks - enables/disable clocks
+ * @hba: host controller instance
+ * @on: If true, enable clocks else disable them.
+ * @status: PRE_CHANGE or POST_CHANGE notify
+ *
+ * Returns 0 on success, non-zero on failure.
+ */
+static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
+ int vote = 0;
+
+ /*
+ * In case ufs_qcom_init() is not yet done, simply ignore.
+ * This ufs_qcom_setup_clocks() shall be called from
+ * ufs_qcom_init() after init is done.
+ */
+ if (!host)
+ return 0;
+
+ if (on && (status == POST_CHANGE)) {
+ phy_power_on(host->generic_phy);
+
+ /* enable the device ref clock for HS mode*/
+ if (ufshcd_is_hs_mode(&hba->pwr_info))
+ ufs_qcom_dev_ref_clk_ctrl(host, true);
+ vote = host->bus_vote.saved_vote;
+ if (vote == host->bus_vote.min_bw_vote)
+ ufs_qcom_update_bus_bw_vote(host);
+
+ } else if (!on && (status == PRE_CHANGE)) {
+ if (!ufs_qcom_is_link_active(hba)) {
+ /* disable device ref_clk */
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+
+ /* powering off PHY during aggressive clk gating */
+ phy_power_off(host->generic_phy);
+ }
+
+ vote = host->bus_vote.min_bw_vote;
+ }
+
+ err = ufs_qcom_set_bus_vote(host, vote);
+ if (err)
+ dev_err(hba->dev, "%s: set bus vote failed %d\n",
+ __func__, err);
+
+ return err;
+}
+
+#define ANDROID_BOOT_DEV_MAX 30
+static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
+
+#ifndef MODULE
+static int __init get_android_boot_dev(char *str)
+{
+ strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
+ return 1;
+}
+__setup("androidboot.bootdevice=", get_android_boot_dev);
+#endif
+
+/**
+ * ufs_qcom_init - bind phy with controller
+ * @hba: host controller instance
+ *
+ * Binds PHY with controller and powers up PHY enabling clocks
+ * and regulators.
+ *
+ * Returns -EPROBE_DEFER if binding fails, returns negative error
+ * on phy power up failure and returns zero on success.
+ */
+static int ufs_qcom_init(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ufs_qcom_host *host;
+ struct resource *res;
+
+ if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
+ return -ENODEV;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ err = -ENOMEM;
+ dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
+ goto out;
+ }
+
+ /* Make a two way bind between the qcom host and the hba */
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ /*
+ * voting/devoting device ref_clk source is time consuming hence
+ * skip devoting it during aggressive clock gating. This clock
+ * will still be gated off during runtime suspend.
+ */
+ host->generic_phy = devm_phy_get(dev, "ufsphy");
+
+ if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) {
+ /*
+ * UFS driver might be probed before the phy driver does.
+ * In that case we would like to return EPROBE_DEFER code.
+ */
+ err = -EPROBE_DEFER;
+ dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n",
+ __func__, err);
+ goto out_variant_clear;
+ } else if (IS_ERR(host->generic_phy)) {
+ err = PTR_ERR(host->generic_phy);
+ dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
+ goto out_variant_clear;
+ }
+
+ err = ufs_qcom_bus_register(host);
+ if (err)
+ goto out_variant_clear;
+
+ ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
+ &host->hw_ver.minor, &host->hw_ver.step);
+
+ /*
+ * for newer controllers, device reference clock control bit has
+ * moved inside UFS controller register address space itself.
+ */
+ if (host->hw_ver.major >= 0x02) {
+ host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
+ host->dev_ref_clk_en_mask = BIT(26);
+ } else {
+ /* "dev_ref_clk_ctrl_mem" is optional resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ host->dev_ref_clk_ctrl_mmio =
+ devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) {
+ dev_warn(dev,
+ "%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n",
+ __func__,
+ PTR_ERR(host->dev_ref_clk_ctrl_mmio));
+ host->dev_ref_clk_ctrl_mmio = NULL;
+ }
+ host->dev_ref_clk_en_mask = BIT(5);
+ }
+ }
+
+ /* update phy revision information before calling phy_init() */
+ ufs_qcom_phy_save_controller_version(host->generic_phy,
+ host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
+
+ phy_init(host->generic_phy);
+ err = phy_power_on(host->generic_phy);
+ if (err)
+ goto out_unregister_bus;
+
+ err = ufs_qcom_init_lane_clks(host);
+ if (err)
+ goto out_disable_phy;
+
+ ufs_qcom_set_caps(hba);
+ ufs_qcom_advertise_quirks(hba);
+
+ ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
+
+ if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
+ ufs_qcom_hosts[hba->dev->id] = host;
+
+ host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN;
+ ufs_qcom_get_default_testbus_cfg(host);
+ err = ufs_qcom_testbus_config(host);
+ if (err) {
+ dev_warn(dev, "%s: failed to configure the testbus %d\n",
+ __func__, err);
+ err = 0;
+ }
+
+ goto out;
+
+out_disable_phy:
+ phy_power_off(host->generic_phy);
+out_unregister_bus:
+ phy_exit(host->generic_phy);
+out_variant_clear:
+ ufshcd_set_variant(hba, NULL);
+out:
+ return err;
+}
+
+static void ufs_qcom_exit(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(host->generic_phy);
+ phy_exit(host->generic_phy);
+}
+
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles)
+{
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
+ return -EINVAL;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+ if (err)
+ goto out;
+
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
+ core_clk_ctrl_reg |= clk_cycles;
+
+ /* Clear CORE_CLK_DIV_EN */
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+out:
+ return err;
+}
+
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
+{
+ /* nothing to do as of now */
+ return 0;
+}
+
+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 150 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+}
+
+static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+
+ /* make sure CORE_CLK_DIV_EN is cleared */
+ if (!err &&
+ (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 75 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+}
+
+static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
+ bool scale_up, enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+ int err = 0;
+
+ if (status == PRE_CHANGE) {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_pre_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_pre_change(hba);
+ } else {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_post_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_post_change(hba);
+
+ if (err || !dev_req_params)
+ goto out;
+
+ ufs_qcom_cfg_timers(hba,
+ dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate,
+ false);
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+out:
+ return err;
+}
+
+static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba,
+ void *priv, void (*print_fn)(struct ufs_hba *hba,
+ int offset, int num_regs, char *str, void *priv))
+{
+ u32 reg;
+ struct ufs_qcom_host *host;
+
+ if (unlikely(!hba)) {
+ pr_err("%s: hba is NULL\n", __func__);
+ return;
+ }
+ if (unlikely(!print_fn)) {
+ dev_err(hba->dev, "%s: print_fn is NULL\n", __func__);
+ return;
+ }
+
+ host = ufshcd_get_variant(hba);
+ if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN))
+ return;
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC);
+ print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv);
+
+ reg = ufshcd_readl(hba, REG_UFS_CFG1);
+ reg |= UFS_BIT(17);
+ ufshcd_writel(hba, reg, REG_UFS_CFG1);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM);
+ print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM);
+ print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
+ print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
+
+ /* clear bit 17 - UTP_DBG_RAMS_EN */
+ ufshcd_rmwl(hba, UFS_BIT(17), 0, REG_UFS_CFG1);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
+ print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM);
+ print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC);
+ print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC);
+ print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC);
+ print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT);
+ print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT);
+ print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv);
+}
+
+static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
+{
+ if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) {
+ ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
+ UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
+ } else {
+ ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1);
+ }
+}
+
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
+{
+ /* provide a legal default configuration */
+ host->testbus.select_major = TSTBUS_UNIPRO;
+ host->testbus.select_minor = 37;
+}
+
+static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
+{
+ if (host->testbus.select_major >= TSTBUS_MAX) {
+ dev_err(host->hba->dev,
+ "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
+ __func__, host->testbus.select_major);
+ return false;
+ }
+
+ return true;
+}
+
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
+{
+ int reg;
+ int offset;
+ u32 mask = TEST_BUS_SUB_SEL_MASK;
+
+ if (!host)
+ return -EINVAL;
+
+ if (!ufs_qcom_testbus_cfg_is_ok(host))
+ return -EPERM;
+
+ switch (host->testbus.select_major) {
+ case TSTBUS_UAWM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 24;
+ break;
+ case TSTBUS_UARM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 16;
+ break;
+ case TSTBUS_TXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 8;
+ break;
+ case TSTBUS_RXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 0;
+ break;
+ case TSTBUS_DFC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 24;
+ break;
+ case TSTBUS_TRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 16;
+ break;
+ case TSTBUS_TMRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 8;
+ break;
+ case TSTBUS_OCSC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 0;
+ break;
+ case TSTBUS_WRAPPER:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 16;
+ break;
+ case TSTBUS_COMBINED:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 8;
+ break;
+ case TSTBUS_UTP_HCI:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 0;
+ break;
+ case TSTBUS_UNIPRO:
+ reg = UFS_UNIPRO_CFG;
+ offset = 20;
+ mask = 0xFFF;
+ break;
+ /*
+ * No need for a default case, since
+ * ufs_qcom_testbus_cfg_is_ok() checks that the configuration
+ * is legal
+ */
+ }
+ mask <<= offset;
+
+ pm_runtime_get_sync(host->hba->dev);
+ ufshcd_hold(host->hba, false);
+ ufshcd_rmwl(host->hba, TEST_BUS_SEL,
+ (u32)host->testbus.select_major << 19,
+ REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, mask,
+ (u32)host->testbus.select_minor << offset,
+ reg);
+ ufs_qcom_enable_test_bus(host);
+ /*
+ * Make sure the test bus configuration is
+ * committed before returning.
+ */
+ mb();
+ ufshcd_release(host->hba);
+ pm_runtime_put_sync(host->hba->dev);
+
+ return 0;
+}
+
+static void ufs_qcom_testbus_read(struct ufs_hba *hba)
+{
+ ufs_qcom_dump_regs(hba, UFS_TEST_BUS, 1, "UFS_TEST_BUS ");
+}
+
+static void ufs_qcom_print_unipro_testbus(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ u32 *testbus = NULL;
+ int i, nminor = 256, testbus_len = nminor * sizeof(u32);
+
+ testbus = kmalloc(testbus_len, GFP_KERNEL);
+ if (!testbus)
+ return;
+
+ host->testbus.select_major = TSTBUS_UNIPRO;
+ for (i = 0; i < nminor; i++) {
+ host->testbus.select_minor = i;
+ ufs_qcom_testbus_config(host);
+ testbus[i] = ufshcd_readl(hba, UFS_TEST_BUS);
+ }
+ print_hex_dump(KERN_ERR, "UNIPRO_TEST_BUS ", DUMP_PREFIX_OFFSET,
+ 16, 4, testbus, testbus_len, false);
+ kfree(testbus);
+}
+
+static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
+{
+ ufs_qcom_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16,
+ "HCI Vendor Specific Registers ");
+
+ /* sleep a bit intermittently as we are dumping too much data */
+ ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper);
+ udelay(1000);
+ ufs_qcom_testbus_read(hba);
+ udelay(1000);
+ ufs_qcom_print_unipro_testbus(hba);
+ udelay(1000);
+}
+
+/**
+ * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
+ *
+ * The variant operations configure the necessary controller and PHY
+ * handshake during initialization.
+ */
+static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+ .name = "qcom",
+ .init = ufs_qcom_init,
+ .exit = ufs_qcom_exit,
+ .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version,
+ .clk_scale_notify = ufs_qcom_clk_scale_notify,
+ .setup_clocks = ufs_qcom_setup_clocks,
+ .hce_enable_notify = ufs_qcom_hce_enable_notify,
+ .link_startup_notify = ufs_qcom_link_startup_notify,
+ .pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
+ .suspend = ufs_qcom_suspend,
+ .resume = ufs_qcom_resume,
+ .dbg_register_dump = ufs_qcom_dump_dbg_regs,
+};
+
+/**
+ * ufs_qcom_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Return zero for success and non-zero for failure
+ */
+static int ufs_qcom_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * ufs_qcom_remove - set driver_data of the device to NULL
+ * @pdev: pointer to platform device handle
+ *
+ * Always returns 0
+ */
+static int ufs_qcom_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_qcom_of_match[] = {
+ { .compatible = "qcom,ufshc"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
+
+static const struct dev_pm_ops ufs_qcom_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_qcom_pltform = {
+ .probe = ufs_qcom_probe,
+ .remove = ufs_qcom_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-qcom",
+ .pm = &ufs_qcom_pm_ops,
+ .of_match_table = of_match_ptr(ufs_qcom_of_match),
+ },
+};
+module_platform_driver(ufs_qcom_pltform);
+
+MODULE_LICENSE("GPL v2");