[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/uio/uio_netx.c b/src/kernel/linux/v4.14/drivers/uio/uio_netx.c
new file mode 100644
index 0000000..4c345db
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/uio/uio_netx.c
@@ -0,0 +1,179 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER 0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
+#define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010
+#define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000
+#define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001
+#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
+#define PCI_SUBDEVICE_ID_NXPCA 0x3335
+
+#define DPM_HOST_INT_EN0 0xfff0
+#define DPM_HOST_INT_STAT0 0xffe0
+
+#define DPM_HOST_INT_MASK 0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN 0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+ void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_EN0;
+ void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_STAT0;
+
+ /* Is one of our interrupts enabled and active ? */
+ if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+ & DPM_HOST_INT_MASK))
+ return IRQ_NONE;
+
+ /* Disable interrupt */
+ iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+ int_enable_reg);
+ return IRQ_HANDLED;
+}
+
+static int netx_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct uio_info *info;
+ int bar;
+
+ info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ if (pci_enable_device(dev))
+ goto out_free;
+
+ if (pci_request_regions(dev, "netx"))
+ goto out_disable;
+
+ switch (id->device) {
+ case PCI_DEVICE_ID_HILSCHER_NETX:
+ bar = 0;
+ info->name = "netx";
+ break;
+ case PCI_DEVICE_ID_HILSCHER_NETPLC:
+ bar = 0;
+ info->name = "netplc";
+ break;
+ default:
+ bar = 2;
+ info->name = "netx_plx";
+ }
+
+ /* BAR0 or 2 points to the card's dual port memory */
+ info->mem[0].addr = pci_resource_start(dev, bar);
+ if (!info->mem[0].addr)
+ goto out_release;
+ info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+ pci_resource_len(dev, bar));
+
+ if (!info->mem[0].internal_addr)
+ goto out_release;
+
+ info->mem[0].size = pci_resource_len(dev, bar);
+ info->mem[0].memtype = UIO_MEM_PHYS;
+ info->irq = dev->irq;
+ info->irq_flags = IRQF_SHARED;
+ info->handler = netx_handler;
+ info->version = "0.0.1";
+
+ /* Make sure all interrupts are disabled */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+ if (uio_register_device(&dev->dev, info))
+ goto out_unmap;
+
+ pci_set_drvdata(dev, info);
+ dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+ info->name);
+
+ return 0;
+
+out_unmap:
+ iounmap(info->mem[0].internal_addr);
+out_release:
+ pci_release_regions(dev);
+out_disable:
+ pci_disable_device(dev);
+out_free:
+ kfree(info);
+ return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+ struct uio_info *info = pci_get_drvdata(dev);
+
+ /* Disable all interrupts */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+ uio_unregister_device(info);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ iounmap(info->mem[0].internal_addr);
+
+ kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETX,
+ .subvendor = 0,
+ .subdevice = 0,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
+ .subvendor = PCI_VENDOR_ID_HILSCHER,
+ .subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
+ .subvendor = PCI_VENDOR_ID_HILSCHER,
+ .subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXPCA,
+ },
+ { 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+ .name = "netx",
+ .id_table = netx_pci_ids,
+ .probe = netx_pci_probe,
+ .remove = netx_pci_remove,
+};
+
+module_pci_driver(netx_pci_driver);
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");