[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/usb/isp1760/isp1760-hcd.c b/src/kernel/linux/v4.14/drivers/usb/isp1760/isp1760-hcd.c
new file mode 100644
index 0000000..bb4d6d9
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/usb/isp1760/isp1760-hcd.c
@@ -0,0 +1,2234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <asm/unaligned.h>
+#include <asm/cacheflush.h>
+
+#include "isp1760-core.h"
+#include "isp1760-hcd.h"
+#include "isp1760-regs.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+static struct kmem_cache *urb_listitem_cachep;
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd);
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+ return *(struct isp1760_hcd **)hcd->hcd_priv;
+}
+
+/* urb state*/
+#define DELETE_URB (0x0008)
+#define NO_TRANSFER_ACTIVE (0xffffffff)
+
+/* Philips Proprietary Transfer Descriptor (PTD) */
+typedef __u32 __bitwise __dw;
+struct ptd {
+ __dw dw0;
+ __dw dw1;
+ __dw dw2;
+ __dw dw3;
+ __dw dw4;
+ __dw dw5;
+ __dw dw6;
+ __dw dw7;
+};
+#define PTD_OFFSET 0x0400
+#define ISO_PTD_OFFSET 0x0400
+#define INT_PTD_OFFSET 0x0800
+#define ATL_PTD_OFFSET 0x0c00
+#define PAYLOAD_OFFSET 0x1000
+
+
+/* ATL */
+/* DW0 */
+#define DW0_VALID_BIT 1
+#define FROM_DW0_VALID(x) ((x) & 0x01)
+#define TO_DW0_LENGTH(x) (((u32) x) << 3)
+#define TO_DW0_MAXPACKET(x) (((u32) x) << 18)
+#define TO_DW0_MULTI(x) (((u32) x) << 29)
+#define TO_DW0_ENDPOINT(x) (((u32) x) << 31)
+/* DW1 */
+#define TO_DW1_DEVICE_ADDR(x) (((u32) x) << 3)
+#define TO_DW1_PID_TOKEN(x) (((u32) x) << 10)
+#define DW1_TRANS_BULK ((u32) 2 << 12)
+#define DW1_TRANS_INT ((u32) 3 << 12)
+#define DW1_TRANS_SPLIT ((u32) 1 << 14)
+#define DW1_SE_USB_LOSPEED ((u32) 2 << 16)
+#define TO_DW1_PORT_NUM(x) (((u32) x) << 18)
+#define TO_DW1_HUB_NUM(x) (((u32) x) << 25)
+/* DW2 */
+#define TO_DW2_DATA_START_ADDR(x) (((u32) x) << 8)
+#define TO_DW2_RL(x) ((x) << 25)
+#define FROM_DW2_RL(x) (((x) >> 25) & 0xf)
+/* DW3 */
+#define FROM_DW3_NRBYTESTRANSFERRED(x) ((x) & 0x7fff)
+#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x) ((x) & 0x07ff)
+#define TO_DW3_NAKCOUNT(x) ((x) << 19)
+#define FROM_DW3_NAKCOUNT(x) (((x) >> 19) & 0xf)
+#define TO_DW3_CERR(x) ((x) << 23)
+#define FROM_DW3_CERR(x) (((x) >> 23) & 0x3)
+#define TO_DW3_DATA_TOGGLE(x) ((x) << 25)
+#define FROM_DW3_DATA_TOGGLE(x) (((x) >> 25) & 0x1)
+#define TO_DW3_PING(x) ((x) << 26)
+#define FROM_DW3_PING(x) (((x) >> 26) & 0x1)
+#define DW3_ERROR_BIT (1 << 28)
+#define DW3_BABBLE_BIT (1 << 29)
+#define DW3_HALT_BIT (1 << 30)
+#define DW3_ACTIVE_BIT (1 << 31)
+#define FROM_DW3_ACTIVE(x) (((x) >> 31) & 0x01)
+
+#define INT_UNDERRUN (1 << 2)
+#define INT_BABBLE (1 << 1)
+#define INT_EXACT (1 << 0)
+
+#define SETUP_PID (2)
+#define IN_PID (1)
+#define OUT_PID (0)
+
+/* Errata 1 */
+#define RL_COUNTER (0)
+#define NAK_COUNTER (0)
+#define ERR_COUNTER (2)
+
+struct isp1760_qtd {
+ u8 packet_type;
+ void *data_buffer;
+ u32 payload_addr;
+
+ /* the rest is HCD-private */
+ struct list_head qtd_list;
+ struct urb *urb;
+ size_t length;
+ size_t actual_length;
+
+ /* QTD_ENQUEUED: waiting for transfer (inactive) */
+ /* QTD_PAYLOAD_ALLOC: chip mem has been allocated for payload */
+ /* QTD_XFER_STARTED: valid ptd has been written to isp176x - only
+ interrupt handler may touch this qtd! */
+ /* QTD_XFER_COMPLETE: payload has been transferred successfully */
+ /* QTD_RETIRE: transfer error/abort qtd */
+#define QTD_ENQUEUED 0
+#define QTD_PAYLOAD_ALLOC 1
+#define QTD_XFER_STARTED 2
+#define QTD_XFER_COMPLETE 3
+#define QTD_RETIRE 4
+ u32 status;
+};
+
+/* Queue head, one for each active endpoint */
+struct isp1760_qh {
+ struct list_head qh_list;
+ struct list_head qtd_list;
+ u32 toggle;
+ u32 ping;
+ int slot;
+ int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */
+};
+
+struct urb_listitem {
+ struct list_head urb_list;
+ struct urb *urb;
+};
+
+/*
+ * Access functions for isp176x registers (addresses 0..0x03FF).
+ */
+static u32 reg_read32(void __iomem *base, u32 reg)
+{
+ return isp1760_read32(base, reg);
+}
+
+static void reg_write32(void __iomem *base, u32 reg, u32 val)
+{
+ isp1760_write32(base, reg, val);
+}
+
+/*
+ * Access functions for isp176x memory (offset >= 0x0400).
+ *
+ * bank_reads8() reads memory locations prefetched by an earlier write to
+ * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
+ * bank optimizations, you should use the more generic mem_reads8() below.
+ *
+ * For access to ptd memory, use the specialized ptd_read() and ptd_write()
+ * below.
+ *
+ * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
+ __u32 *dst, u32 bytes)
+{
+ __u32 __iomem *src;
+ u32 val;
+ __u8 *src_byteptr;
+ __u8 *dst_byteptr;
+
+ src = src_base + (bank_addr | src_offset);
+
+ if (src_offset < PAYLOAD_OFFSET) {
+ while (bytes >= 4) {
+ *dst = le32_to_cpu(__raw_readl(src));
+ bytes -= 4;
+ src++;
+ dst++;
+ }
+ } else {
+ while (bytes >= 4) {
+ *dst = __raw_readl(src);
+ bytes -= 4;
+ src++;
+ dst++;
+ }
+ }
+
+ if (!bytes)
+ return;
+
+ /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+ * allocated.
+ */
+ if (src_offset < PAYLOAD_OFFSET)
+ val = le32_to_cpu(__raw_readl(src));
+ else
+ val = __raw_readl(src);
+
+ dst_byteptr = (void *) dst;
+ src_byteptr = (void *) &val;
+ while (bytes > 0) {
+ *dst_byteptr = *src_byteptr;
+ dst_byteptr++;
+ src_byteptr++;
+ bytes--;
+ }
+}
+
+static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst,
+ u32 bytes)
+{
+ reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0));
+ ndelay(90);
+ bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes);
+}
+
+static void mem_writes8(void __iomem *dst_base, u32 dst_offset,
+ __u32 const *src, u32 bytes)
+{
+ __u32 __iomem *dst;
+
+ dst = dst_base + dst_offset;
+
+ if (dst_offset < PAYLOAD_OFFSET) {
+ while (bytes >= 4) {
+ __raw_writel(cpu_to_le32(*src), dst);
+ bytes -= 4;
+ src++;
+ dst++;
+ }
+ } else {
+ while (bytes >= 4) {
+ __raw_writel(*src, dst);
+ bytes -= 4;
+ src++;
+ dst++;
+ }
+ }
+
+ if (!bytes)
+ return;
+ /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
+ * extra bytes should not be read by the HW.
+ */
+
+ if (dst_offset < PAYLOAD_OFFSET)
+ __raw_writel(cpu_to_le32(*src), dst);
+ else
+ __raw_writel(*src, dst);
+}
+
+/*
+ * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
+ * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
+ */
+static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot,
+ struct ptd *ptd)
+{
+ reg_write32(base, HC_MEMORY_REG,
+ ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd));
+ ndelay(90);
+ bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0),
+ (void *) ptd, sizeof(*ptd));
+}
+
+static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
+ struct ptd *ptd)
+{
+ mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0),
+ &ptd->dw1, 7*sizeof(ptd->dw1));
+ /* Make sure dw0 gets written last (after other dw's and after payload)
+ since it contains the enable bit */
+ wmb();
+ mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0,
+ sizeof(ptd->dw0));
+}
+
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+ int i, curr;
+ u32 payload_addr;
+
+ payload_addr = PAYLOAD_OFFSET;
+ for (i = 0; i < BLOCK_1_NUM; i++) {
+ priv->memory_pool[i].start = payload_addr;
+ priv->memory_pool[i].size = BLOCK_1_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload_addr += priv->memory_pool[i].size;
+ }
+
+ curr = i;
+ for (i = 0; i < BLOCK_2_NUM; i++) {
+ priv->memory_pool[curr + i].start = payload_addr;
+ priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
+ priv->memory_pool[curr + i].free = 1;
+ payload_addr += priv->memory_pool[curr + i].size;
+ }
+
+ curr = i;
+ for (i = 0; i < BLOCK_3_NUM; i++) {
+ priv->memory_pool[curr + i].start = payload_addr;
+ priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
+ priv->memory_pool[curr + i].free = 1;
+ payload_addr += priv->memory_pool[curr + i].size;
+ }
+
+ WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
+}
+
+static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int i;
+
+ WARN_ON(qtd->payload_addr);
+
+ if (!qtd->length)
+ return;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].size >= qtd->length &&
+ priv->memory_pool[i].free) {
+ priv->memory_pool[i].free = 0;
+ qtd->payload_addr = priv->memory_pool[i].start;
+ return;
+ }
+ }
+}
+
+static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int i;
+
+ if (!qtd->payload_addr)
+ return;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].start == qtd->payload_addr) {
+ WARN_ON(priv->memory_pool[i].free);
+ priv->memory_pool[i].free = 1;
+ qtd->payload_addr = 0;
+ return;
+ }
+ }
+
+ dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
+ __func__, qtd->payload_addr);
+ WARN_ON(1);
+ qtd->payload_addr = 0;
+}
+
+static int handshake(struct usb_hcd *hcd, u32 reg,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = reg_read32(hcd->regs, reg);
+ if (result == ~0)
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+ u32 command = reg_read32(hcd->regs, HC_USBCMD);
+
+ command |= CMD_RESET;
+ reg_write32(hcd->regs, HC_USBCMD, command);
+ hcd->state = HC_STATE_HALT;
+ priv->next_statechange = jiffies;
+
+ return handshake(hcd, HC_USBCMD, CMD_RESET, 0, 250 * 1000);
+}
+
+static struct isp1760_qh *qh_alloc(gfp_t flags)
+{
+ struct isp1760_qh *qh;
+
+ qh = kmem_cache_zalloc(qh_cachep, flags);
+ if (!qh)
+ return NULL;
+
+ INIT_LIST_HEAD(&qh->qh_list);
+ INIT_LIST_HEAD(&qh->qtd_list);
+ qh->slot = -1;
+
+ return qh;
+}
+
+static void qh_free(struct isp1760_qh *qh)
+{
+ WARN_ON(!list_empty(&qh->qtd_list));
+ WARN_ON(qh->slot > -1);
+ kmem_cache_free(qh_cachep, qh);
+}
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 hcc_params;
+ int i;
+
+ spin_lock_init(&priv->lock);
+
+ for (i = 0; i < QH_END; i++)
+ INIT_LIST_HEAD(&priv->qh_list[i]);
+
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+ */
+ priv->periodic_size = DEFAULT_I_TDPS;
+
+ /* controllers may cache some of the periodic schedule ... */
+ hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS);
+ /* full frame cache */
+ if (HCC_ISOC_CACHE(hcc_params))
+ priv->i_thresh = 8;
+ else /* N microframes cached */
+ priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+ return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int result;
+ u32 scratch, hwmode;
+
+ reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe);
+ /* Change bus pattern */
+ scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+ scratch = reg_read32(hcd->regs, HC_SCRATCH_REG);
+ if (scratch != 0xdeadbabe) {
+ dev_err(hcd->self.controller, "Scratch test failed.\n");
+ return -ENODEV;
+ }
+
+ /*
+ * The RESET_HC bit in the SW_RESET register is supposed to reset the
+ * host controller without touching the CPU interface registers, but at
+ * least on the ISP1761 it seems to behave as the RESET_ALL bit and
+ * reset the whole device. We thus can't use it here, so let's reset
+ * the host controller through the EHCI USB Command register. The device
+ * has been reset in core code anyway, so this shouldn't matter.
+ */
+ reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0);
+ reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+ reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+ reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+
+ result = ehci_reset(hcd);
+ if (result)
+ return result;
+
+ /* Step 11 passed */
+
+ /* ATL reset */
+ hwmode = reg_read32(hcd->regs, HC_HW_MODE_CTRL) & ~ALL_ATX_RESET;
+ reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
+ mdelay(10);
+ reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
+
+ reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
+
+ priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
+
+ return priv_init(hcd);
+}
+
+static u32 base_to_chip(u32 base)
+{
+ return ((base - 0x400) >> 3);
+}
+
+static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
+{
+ struct urb *urb;
+
+ if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
+ return 1;
+
+ urb = qtd->urb;
+ qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
+ return (qtd->urb != urb);
+}
+
+/* magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT 0
+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT 1
+#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+
+static void create_ptd_atl(struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+ u32 maxpacket;
+ u32 multi;
+ u32 rl = RL_COUNTER;
+ u32 nak = NAK_COUNTER;
+
+ memset(ptd, 0, sizeof(*ptd));
+
+ /* according to 3.6.2, max packet len can not be > 0x400 */
+ maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe,
+ usb_pipeout(qtd->urb->pipe));
+ multi = 1 + ((maxpacket >> 11) & 0x3);
+ maxpacket &= 0x7ff;
+
+ /* DW0 */
+ ptd->dw0 = DW0_VALID_BIT;
+ ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
+ ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
+ ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
+
+ /* DW1 */
+ ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1;
+ ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
+ ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
+
+ if (usb_pipebulk(qtd->urb->pipe))
+ ptd->dw1 |= DW1_TRANS_BULK;
+ else if (usb_pipeint(qtd->urb->pipe))
+ ptd->dw1 |= DW1_TRANS_INT;
+
+ if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
+ /* split transaction */
+
+ ptd->dw1 |= DW1_TRANS_SPLIT;
+ if (qtd->urb->dev->speed == USB_SPEED_LOW)
+ ptd->dw1 |= DW1_SE_USB_LOSPEED;
+
+ ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
+ ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
+
+ /* SE bit for Split INT transfers */
+ if (usb_pipeint(qtd->urb->pipe) &&
+ (qtd->urb->dev->speed == USB_SPEED_LOW))
+ ptd->dw1 |= 2 << 16;
+
+ rl = 0;
+ nak = 0;
+ } else {
+ ptd->dw0 |= TO_DW0_MULTI(multi);
+ if (usb_pipecontrol(qtd->urb->pipe) ||
+ usb_pipebulk(qtd->urb->pipe))
+ ptd->dw3 |= TO_DW3_PING(qh->ping);
+ }
+ /* DW2 */
+ ptd->dw2 = 0;
+ ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
+ ptd->dw2 |= TO_DW2_RL(rl);
+
+ /* DW3 */
+ ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
+ ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
+ if (usb_pipecontrol(qtd->urb->pipe)) {
+ if (qtd->data_buffer == qtd->urb->setup_packet)
+ ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
+ else if (last_qtd_of_urb(qtd, qh))
+ ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
+ }
+
+ ptd->dw3 |= DW3_ACTIVE_BIT;
+ /* Cerr */
+ ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
+}
+
+static void transform_add_int(struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+ u32 usof;
+ u32 period;
+
+ /*
+ * Most of this is guessing. ISP1761 datasheet is quite unclear, and
+ * the algorithm from the original Philips driver code, which was
+ * pretty much used in this driver before as well, is quite horrendous
+ * and, i believe, incorrect. The code below follows the datasheet and
+ * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
+ * more reliable this way (fingers crossed...).
+ */
+
+ if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
+ /* urb->interval is in units of microframes (1/8 ms) */
+ period = qtd->urb->interval >> 3;
+
+ if (qtd->urb->interval > 4)
+ usof = 0x01; /* One bit set =>
+ interval 1 ms * uFrame-match */
+ else if (qtd->urb->interval > 2)
+ usof = 0x22; /* Two bits set => interval 1/2 ms */
+ else if (qtd->urb->interval > 1)
+ usof = 0x55; /* Four bits set => interval 1/4 ms */
+ else
+ usof = 0xff; /* All bits set => interval 1/8 ms */
+ } else {
+ /* urb->interval is in units of frames (1 ms) */
+ period = qtd->urb->interval;
+ usof = 0x0f; /* Execute Start Split on any of the
+ four first uFrames */
+
+ /*
+ * First 8 bits in dw5 is uSCS and "specifies which uSOF the
+ * complete split needs to be sent. Valid only for IN." Also,
+ * "All bits can be set to one for every transfer." (p 82,
+ * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
+ * that number come from? 0xff seems to work fine...
+ */
+ /* ptd->dw5 = 0x1c; */
+ ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */
+ }
+
+ period = period >> 1;/* Ensure equal or shorter period than requested */
+ period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
+
+ ptd->dw2 |= period;
+ ptd->dw4 = usof;
+}
+
+static void create_ptd_int(struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+ create_ptd_atl(qh, qtd, ptd);
+ transform_add_int(qh, qtd, ptd);
+}
+
+static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+ if (!urb->unlinked) {
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+ }
+
+ if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+ void *ptr;
+ for (ptr = urb->transfer_buffer;
+ ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+ ptr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(ptr));
+ }
+
+ /* complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock(&priv->lock);
+ usb_hcd_giveback_urb(hcd, urb, urb->status);
+ spin_lock(&priv->lock);
+}
+
+static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
+ u8 packet_type)
+{
+ struct isp1760_qtd *qtd;
+
+ qtd = kmem_cache_zalloc(qtd_cachep, flags);
+ if (!qtd)
+ return NULL;
+
+ INIT_LIST_HEAD(&qtd->qtd_list);
+ qtd->urb = urb;
+ qtd->packet_type = packet_type;
+ qtd->status = QTD_ENQUEUED;
+ qtd->actual_length = 0;
+
+ return qtd;
+}
+
+static void qtd_free(struct isp1760_qtd *qtd)
+{
+ WARN_ON(qtd->payload_addr);
+ kmem_cache_free(qtd_cachep, qtd);
+}
+
+static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
+ struct isp1760_slotinfo *slots,
+ struct isp1760_qtd *qtd, struct isp1760_qh *qh,
+ struct ptd *ptd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int skip_map;
+
+ WARN_ON((slot < 0) || (slot > 31));
+ WARN_ON(qtd->length && !qtd->payload_addr);
+ WARN_ON(slots[slot].qtd);
+ WARN_ON(slots[slot].qh);
+ WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
+
+ /* Make sure done map has not triggered from some unlinked transfer */
+ if (ptd_offset == ATL_PTD_OFFSET) {
+ priv->atl_done_map |= reg_read32(hcd->regs,
+ HC_ATL_PTD_DONEMAP_REG);
+ priv->atl_done_map &= ~(1 << slot);
+ } else {
+ priv->int_done_map |= reg_read32(hcd->regs,
+ HC_INT_PTD_DONEMAP_REG);
+ priv->int_done_map &= ~(1 << slot);
+ }
+
+ qh->slot = slot;
+ qtd->status = QTD_XFER_STARTED;
+ slots[slot].timestamp = jiffies;
+ slots[slot].qtd = qtd;
+ slots[slot].qh = qh;
+ ptd_write(hcd->regs, ptd_offset, slot, ptd);
+
+ if (ptd_offset == ATL_PTD_OFFSET) {
+ skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+ skip_map &= ~(1 << qh->slot);
+ reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
+ } else {
+ skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+ skip_map &= ~(1 << qh->slot);
+ reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
+ }
+}
+
+static int is_short_bulk(struct isp1760_qtd *qtd)
+{
+ return (usb_pipebulk(qtd->urb->pipe) &&
+ (qtd->actual_length < qtd->length));
+}
+
+static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct list_head *urb_list)
+{
+ int last_qtd;
+ struct isp1760_qtd *qtd, *qtd_next;
+ struct urb_listitem *urb_listitem;
+
+ list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
+ if (qtd->status < QTD_XFER_COMPLETE)
+ break;
+
+ last_qtd = last_qtd_of_urb(qtd, qh);
+
+ if ((!last_qtd) && (qtd->status == QTD_RETIRE))
+ qtd_next->status = QTD_RETIRE;
+
+ if (qtd->status == QTD_XFER_COMPLETE) {
+ if (qtd->actual_length) {
+ switch (qtd->packet_type) {
+ case IN_PID:
+ mem_reads8(hcd->regs, qtd->payload_addr,
+ qtd->data_buffer,
+ qtd->actual_length);
+ /* Fall through (?) */
+ case OUT_PID:
+ qtd->urb->actual_length +=
+ qtd->actual_length;
+ /* Fall through ... */
+ case SETUP_PID:
+ break;
+ }
+ }
+
+ if (is_short_bulk(qtd)) {
+ if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
+ qtd->urb->status = -EREMOTEIO;
+ if (!last_qtd)
+ qtd_next->status = QTD_RETIRE;
+ }
+ }
+
+ if (qtd->payload_addr)
+ free_mem(hcd, qtd);
+
+ if (last_qtd) {
+ if ((qtd->status == QTD_RETIRE) &&
+ (qtd->urb->status == -EINPROGRESS))
+ qtd->urb->status = -EPIPE;
+ /* Defer calling of urb_done() since it releases lock */
+ urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
+ GFP_ATOMIC);
+ if (unlikely(!urb_listitem))
+ break; /* Try again on next call */
+ urb_listitem->urb = qtd->urb;
+ list_add_tail(&urb_listitem->urb_list, urb_list);
+ }
+
+ list_del(&qtd->qtd_list);
+ qtd_free(qtd);
+ }
+}
+
+#define ENQUEUE_DEPTH 2
+static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int ptd_offset;
+ struct isp1760_slotinfo *slots;
+ int curr_slot, free_slot;
+ int n;
+ struct ptd ptd;
+ struct isp1760_qtd *qtd;
+
+ if (unlikely(list_empty(&qh->qtd_list))) {
+ WARN_ON(1);
+ return;
+ }
+
+ /* Make sure this endpoint's TT buffer is clean before queueing ptds */
+ if (qh->tt_buffer_dirty)
+ return;
+
+ if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
+ qtd_list)->urb->pipe)) {
+ ptd_offset = INT_PTD_OFFSET;
+ slots = priv->int_slots;
+ } else {
+ ptd_offset = ATL_PTD_OFFSET;
+ slots = priv->atl_slots;
+ }
+
+ free_slot = -1;
+ for (curr_slot = 0; curr_slot < 32; curr_slot++) {
+ if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
+ free_slot = curr_slot;
+ if (slots[curr_slot].qh == qh)
+ break;
+ }
+
+ n = 0;
+ list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
+ if (qtd->status == QTD_ENQUEUED) {
+ WARN_ON(qtd->payload_addr);
+ alloc_mem(hcd, qtd);
+ if ((qtd->length) && (!qtd->payload_addr))
+ break;
+
+ if ((qtd->length) &&
+ ((qtd->packet_type == SETUP_PID) ||
+ (qtd->packet_type == OUT_PID))) {
+ mem_writes8(hcd->regs, qtd->payload_addr,
+ qtd->data_buffer, qtd->length);
+ }
+
+ qtd->status = QTD_PAYLOAD_ALLOC;
+ }
+
+ if (qtd->status == QTD_PAYLOAD_ALLOC) {
+/*
+ if ((curr_slot > 31) && (free_slot == -1))
+ dev_dbg(hcd->self.controller, "%s: No slot "
+ "available for transfer\n", __func__);
+*/
+ /* Start xfer for this endpoint if not already done */
+ if ((curr_slot > 31) && (free_slot > -1)) {
+ if (usb_pipeint(qtd->urb->pipe))
+ create_ptd_int(qh, qtd, &ptd);
+ else
+ create_ptd_atl(qh, qtd, &ptd);
+
+ start_bus_transfer(hcd, ptd_offset, free_slot,
+ slots, qtd, qh, &ptd);
+ curr_slot = free_slot;
+ }
+
+ n++;
+ if (n >= ENQUEUE_DEPTH)
+ break;
+ }
+ }
+}
+
+static void schedule_ptds(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv;
+ struct isp1760_qh *qh, *qh_next;
+ struct list_head *ep_queue;
+ LIST_HEAD(urb_list);
+ struct urb_listitem *urb_listitem, *urb_listitem_next;
+ int i;
+
+ if (!hcd) {
+ WARN_ON(1);
+ return;
+ }
+
+ priv = hcd_to_priv(hcd);
+
+ /*
+ * check finished/retired xfers, transfer payloads, call urb_done()
+ */
+ for (i = 0; i < QH_END; i++) {
+ ep_queue = &priv->qh_list[i];
+ list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
+ collect_qtds(hcd, qh, &urb_list);
+ if (list_empty(&qh->qtd_list))
+ list_del(&qh->qh_list);
+ }
+ }
+
+ list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
+ urb_list) {
+ isp1760_urb_done(hcd, urb_listitem->urb);
+ kmem_cache_free(urb_listitem_cachep, urb_listitem);
+ }
+
+ /*
+ * Schedule packets for transfer.
+ *
+ * According to USB2.0 specification:
+ *
+ * 1st prio: interrupt xfers, up to 80 % of bandwidth
+ * 2nd prio: control xfers
+ * 3rd prio: bulk xfers
+ *
+ * ... but let's use a simpler scheme here (mostly because ISP1761 doc
+ * is very unclear on how to prioritize traffic):
+ *
+ * 1) Enqueue any queued control transfers, as long as payload chip mem
+ * and PTD ATL slots are available.
+ * 2) Enqueue any queued INT transfers, as long as payload chip mem
+ * and PTD INT slots are available.
+ * 3) Enqueue any queued bulk transfers, as long as payload chip mem
+ * and PTD ATL slots are available.
+ *
+ * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
+ * conservation of chip mem and performance.
+ *
+ * I'm sure this scheme could be improved upon!
+ */
+ for (i = 0; i < QH_END; i++) {
+ ep_queue = &priv->qh_list[i];
+ list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
+ enqueue_qtds(hcd, qh);
+ }
+}
+
+#define PTD_STATE_QTD_DONE 1
+#define PTD_STATE_QTD_RELOAD 2
+#define PTD_STATE_URB_RETIRE 3
+
+static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+ struct urb *urb)
+{
+ __dw dw4;
+ int i;
+
+ dw4 = ptd->dw4;
+ dw4 >>= 8;
+
+ /* FIXME: ISP1761 datasheet does not say what to do with these. Do we
+ need to handle these errors? Is it done in hardware? */
+
+ if (ptd->dw3 & DW3_HALT_BIT) {
+
+ urb->status = -EPROTO; /* Default unknown error */
+
+ for (i = 0; i < 8; i++) {
+ switch (dw4 & 0x7) {
+ case INT_UNDERRUN:
+ dev_dbg(hcd->self.controller, "%s: underrun "
+ "during uFrame %d\n",
+ __func__, i);
+ urb->status = -ECOMM; /* Could not write data */
+ break;
+ case INT_EXACT:
+ dev_dbg(hcd->self.controller, "%s: transaction "
+ "error during uFrame %d\n",
+ __func__, i);
+ urb->status = -EPROTO; /* timeout, bad CRC, PID
+ error etc. */
+ break;
+ case INT_BABBLE:
+ dev_dbg(hcd->self.controller, "%s: babble "
+ "error during uFrame %d\n",
+ __func__, i);
+ urb->status = -EOVERFLOW;
+ break;
+ }
+ dw4 >>= 3;
+ }
+
+ return PTD_STATE_URB_RETIRE;
+ }
+
+ return PTD_STATE_QTD_DONE;
+}
+
+static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+ struct urb *urb)
+{
+ WARN_ON(!ptd);
+ if (ptd->dw3 & DW3_HALT_BIT) {
+ if (ptd->dw3 & DW3_BABBLE_BIT)
+ urb->status = -EOVERFLOW;
+ else if (FROM_DW3_CERR(ptd->dw3))
+ urb->status = -EPIPE; /* Stall */
+ else if (ptd->dw3 & DW3_ERROR_BIT)
+ urb->status = -EPROTO; /* XactErr */
+ else
+ urb->status = -EPROTO; /* Unknown */
+/*
+ dev_dbg(hcd->self.controller, "%s: ptd error:\n"
+ " dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
+ " dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
+ __func__,
+ ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
+ ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
+*/
+ return PTD_STATE_URB_RETIRE;
+ }
+
+ if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+ /* Transfer Error, *but* active and no HALT -> reload */
+ dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
+ return PTD_STATE_QTD_RELOAD;
+ }
+
+ if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+ /*
+ * NAKs are handled in HW by the chip. Usually if the
+ * device is not able to send data fast enough.
+ * This happens mostly on slower hardware.
+ */
+ return PTD_STATE_QTD_RELOAD;
+ }
+
+ return PTD_STATE_QTD_DONE;
+}
+
+static void handle_done_ptds(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct ptd ptd;
+ struct isp1760_qh *qh;
+ int slot;
+ int state;
+ struct isp1760_slotinfo *slots;
+ u32 ptd_offset;
+ struct isp1760_qtd *qtd;
+ int modified;
+ int skip_map;
+
+ skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+ priv->int_done_map &= ~skip_map;
+ skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+ priv->atl_done_map &= ~skip_map;
+
+ modified = priv->int_done_map || priv->atl_done_map;
+
+ while (priv->int_done_map || priv->atl_done_map) {
+ if (priv->int_done_map) {
+ /* INT ptd */
+ slot = __ffs(priv->int_done_map);
+ priv->int_done_map &= ~(1 << slot);
+ slots = priv->int_slots;
+ /* This should not trigger, and could be removed if
+ noone have any problems with it triggering: */
+ if (!slots[slot].qh) {
+ WARN_ON(1);
+ continue;
+ }
+ ptd_offset = INT_PTD_OFFSET;
+ ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
+ state = check_int_transfer(hcd, &ptd,
+ slots[slot].qtd->urb);
+ } else {
+ /* ATL ptd */
+ slot = __ffs(priv->atl_done_map);
+ priv->atl_done_map &= ~(1 << slot);
+ slots = priv->atl_slots;
+ /* This should not trigger, and could be removed if
+ noone have any problems with it triggering: */
+ if (!slots[slot].qh) {
+ WARN_ON(1);
+ continue;
+ }
+ ptd_offset = ATL_PTD_OFFSET;
+ ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+ state = check_atl_transfer(hcd, &ptd,
+ slots[slot].qtd->urb);
+ }
+
+ qtd = slots[slot].qtd;
+ slots[slot].qtd = NULL;
+ qh = slots[slot].qh;
+ slots[slot].qh = NULL;
+ qh->slot = -1;
+
+ WARN_ON(qtd->status != QTD_XFER_STARTED);
+
+ switch (state) {
+ case PTD_STATE_QTD_DONE:
+ if ((usb_pipeint(qtd->urb->pipe)) &&
+ (qtd->urb->dev->speed != USB_SPEED_HIGH))
+ qtd->actual_length =
+ FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
+ else
+ qtd->actual_length =
+ FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
+
+ qtd->status = QTD_XFER_COMPLETE;
+ if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
+ is_short_bulk(qtd))
+ qtd = NULL;
+ else
+ qtd = list_entry(qtd->qtd_list.next,
+ typeof(*qtd), qtd_list);
+
+ qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+ qh->ping = FROM_DW3_PING(ptd.dw3);
+ break;
+
+ case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
+ qtd->status = QTD_PAYLOAD_ALLOC;
+ ptd.dw0 |= DW0_VALID_BIT;
+ /* RL counter = ERR counter */
+ ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
+ ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
+ ptd.dw3 &= ~TO_DW3_CERR(3);
+ ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
+ qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+ qh->ping = FROM_DW3_PING(ptd.dw3);
+ break;
+
+ case PTD_STATE_URB_RETIRE:
+ qtd->status = QTD_RETIRE;
+ if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+ (qtd->urb->status != -EPIPE) &&
+ (qtd->urb->status != -EREMOTEIO)) {
+ qh->tt_buffer_dirty = 1;
+ if (usb_hub_clear_tt_buffer(qtd->urb))
+ /* Clear failed; let's hope things work
+ anyway */
+ qh->tt_buffer_dirty = 0;
+ }
+ qtd = NULL;
+ qh->toggle = 0;
+ qh->ping = 0;
+ break;
+
+ default:
+ WARN_ON(1);
+ continue;
+ }
+
+ if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
+ if (slots == priv->int_slots) {
+ if (state == PTD_STATE_QTD_RELOAD)
+ dev_err(hcd->self.controller,
+ "%s: PTD_STATE_QTD_RELOAD on "
+ "interrupt packet\n", __func__);
+ if (state != PTD_STATE_QTD_RELOAD)
+ create_ptd_int(qh, qtd, &ptd);
+ } else {
+ if (state != PTD_STATE_QTD_RELOAD)
+ create_ptd_atl(qh, qtd, &ptd);
+ }
+
+ start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
+ qh, &ptd);
+ }
+ }
+
+ if (modified)
+ schedule_ptds(hcd);
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 imask;
+ irqreturn_t irqret = IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ if (!(hcd->state & HC_STATE_RUNNING))
+ goto leave;
+
+ imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
+ if (unlikely(!imask))
+ goto leave;
+ reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+
+ priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
+ priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
+
+ handle_done_ptds(hcd);
+
+ irqret = IRQ_HANDLED;
+leave:
+ spin_unlock(&priv->lock);
+
+ return irqret;
+}
+
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+
+static void errata2_function(unsigned long data)
+{
+ struct usb_hcd *hcd = (struct usb_hcd *) data;
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int slot;
+ struct ptd ptd;
+ unsigned long spinflags;
+
+ spin_lock_irqsave(&priv->lock, spinflags);
+
+ for (slot = 0; slot < 32; slot++)
+ if (priv->atl_slots[slot].qh && time_after(jiffies,
+ priv->atl_slots[slot].timestamp +
+ msecs_to_jiffies(SLOT_TIMEOUT))) {
+ ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+ if (!FROM_DW0_VALID(ptd.dw0) &&
+ !FROM_DW3_ACTIVE(ptd.dw3))
+ priv->atl_done_map |= 1 << slot;
+ }
+
+ if (priv->atl_done_map)
+ handle_done_ptds(hcd);
+
+ spin_unlock_irqrestore(&priv->lock, spinflags);
+
+ errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+ add_timer(&errata2_timer);
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+ int retval;
+ u32 temp;
+ u32 command;
+ u32 chipid;
+
+ hcd->uses_new_polling = 1;
+
+ hcd->state = HC_STATE_RUNNING;
+
+ /* Set PTD interrupt AND & OR maps */
+ reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+ reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
+ reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+ reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
+ reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+ reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
+ /* step 23 passed */
+
+ temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+ reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
+
+ command = reg_read32(hcd->regs, HC_USBCMD);
+ command &= ~(CMD_LRESET|CMD_RESET);
+ command |= CMD_RUN;
+ reg_write32(hcd->regs, HC_USBCMD, command);
+
+ retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
+ if (retval)
+ return retval;
+
+ /*
+ * XXX
+ * Spec says to write FLAG_CF as last config action, priv code grabs
+ * the semaphore while doing so.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
+
+ retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
+ up_write(&ehci_cf_port_reset_rwsem);
+ if (retval)
+ return retval;
+
+ setup_timer(&errata2_timer, errata2_function, (unsigned long)hcd);
+ errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+ add_timer(&errata2_timer);
+
+ chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+ dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+ chipid & 0xffff, chipid >> 16);
+
+ /* PTD Register Init Part 2, Step 28 */
+
+ /* Setup registers controlling PTD checking */
+ reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+ reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+ reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
+ reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
+ reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
+ reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
+ reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+ ATL_BUF_FILL | INT_BUF_FILL);
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ return 0;
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
+{
+ qtd->data_buffer = databuffer;
+
+ if (len > MAX_PAYLOAD_SIZE)
+ len = MAX_PAYLOAD_SIZE;
+ qtd->length = len;
+
+ return qtd->length;
+}
+
+static void qtd_list_free(struct list_head *qtd_list)
+{
+ struct isp1760_qtd *qtd, *qtd_next;
+
+ list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
+ list_del(&qtd->qtd_list);
+ qtd_free(qtd);
+ }
+}
+
+/*
+ * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
+ * Also calculate the PID type (SETUP/IN/OUT) for each packet.
+ */
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+static void packetize_urb(struct usb_hcd *hcd,
+ struct urb *urb, struct list_head *head, gfp_t flags)
+{
+ struct isp1760_qtd *qtd;
+ void *buf;
+ int len, maxpacketsize;
+ u8 packet_type;
+
+ /*
+ * URBs map to sequences of QTDs: one logical transaction
+ */
+
+ if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ /* XXX This looks like usb storage / SCSI bug */
+ dev_err(hcd->self.controller,
+ "buf is null, dma is %08lx len is %d\n",
+ (long unsigned)urb->transfer_dma,
+ urb->transfer_buffer_length);
+ WARN_ON(1);
+ }
+
+ if (usb_pipein(urb->pipe))
+ packet_type = IN_PID;
+ else
+ packet_type = OUT_PID;
+
+ if (usb_pipecontrol(urb->pipe)) {
+ qtd = qtd_alloc(flags, urb, SETUP_PID);
+ if (!qtd)
+ goto cleanup;
+ qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* for zero length DATA stages, STATUS is always IN */
+ if (urb->transfer_buffer_length == 0)
+ packet_type = IN_PID;
+ }
+
+ maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe)));
+
+ /*
+ * buffer gets wrapped in one or more qtds;
+ * last one may be "short" (including zero len)
+ * and may serve as a control status ack
+ */
+ buf = urb->transfer_buffer;
+ len = urb->transfer_buffer_length;
+
+ for (;;) {
+ int this_qtd_len;
+
+ qtd = qtd_alloc(flags, urb, packet_type);
+ if (!qtd)
+ goto cleanup;
+ this_qtd_len = qtd_fill(qtd, buf, len);
+ list_add_tail(&qtd->qtd_list, head);
+
+ len -= this_qtd_len;
+ buf += this_qtd_len;
+
+ if (len <= 0)
+ break;
+ }
+
+ /*
+ * control requests may need a terminating data "status" ack;
+ * bulk ones may need a terminating short packet (zero length).
+ */
+ if (urb->transfer_buffer_length != 0) {
+ int one_more = 0;
+
+ if (usb_pipecontrol(urb->pipe)) {
+ one_more = 1;
+ if (packet_type == IN_PID)
+ packet_type = OUT_PID;
+ else
+ packet_type = IN_PID;
+ } else if (usb_pipebulk(urb->pipe)
+ && (urb->transfer_flags & URB_ZERO_PACKET)
+ && !(urb->transfer_buffer_length %
+ maxpacketsize)) {
+ one_more = 1;
+ }
+ if (one_more) {
+ qtd = qtd_alloc(flags, urb, packet_type);
+ if (!qtd)
+ goto cleanup;
+
+ /* never any data in such packets */
+ qtd_fill(qtd, NULL, 0);
+ list_add_tail(&qtd->qtd_list, head);
+ }
+ }
+
+ return;
+
+cleanup:
+ qtd_list_free(head);
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct list_head *ep_queue;
+ struct isp1760_qh *qh, *qhit;
+ unsigned long spinflags;
+ LIST_HEAD(new_qtds);
+ int retval;
+ int qh_in_queue;
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ ep_queue = &priv->qh_list[QH_CONTROL];
+ break;
+ case PIPE_BULK:
+ ep_queue = &priv->qh_list[QH_BULK];
+ break;
+ case PIPE_INTERRUPT:
+ if (urb->interval < 0)
+ return -EINVAL;
+ /* FIXME: Check bandwidth */
+ ep_queue = &priv->qh_list[QH_INTERRUPT];
+ break;
+ case PIPE_ISOCHRONOUS:
+ dev_err(hcd->self.controller, "%s: isochronous USB packets "
+ "not yet supported\n",
+ __func__);
+ return -EPIPE;
+ default:
+ dev_err(hcd->self.controller, "%s: unknown pipe type\n",
+ __func__);
+ return -EPIPE;
+ }
+
+ if (usb_pipein(urb->pipe))
+ urb->actual_length = 0;
+
+ packetize_urb(hcd, urb, &new_qtds, mem_flags);
+ if (list_empty(&new_qtds))
+ return -ENOMEM;
+
+ retval = 0;
+ spin_lock_irqsave(&priv->lock, spinflags);
+
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ retval = -ESHUTDOWN;
+ qtd_list_free(&new_qtds);
+ goto out;
+ }
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval) {
+ qtd_list_free(&new_qtds);
+ goto out;
+ }
+
+ qh = urb->ep->hcpriv;
+ if (qh) {
+ qh_in_queue = 0;
+ list_for_each_entry(qhit, ep_queue, qh_list) {
+ if (qhit == qh) {
+ qh_in_queue = 1;
+ break;
+ }
+ }
+ if (!qh_in_queue)
+ list_add_tail(&qh->qh_list, ep_queue);
+ } else {
+ qh = qh_alloc(GFP_ATOMIC);
+ if (!qh) {
+ retval = -ENOMEM;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ qtd_list_free(&new_qtds);
+ goto out;
+ }
+ list_add_tail(&qh->qh_list, ep_queue);
+ urb->ep->hcpriv = qh;
+ }
+
+ list_splice_tail(&new_qtds, &qh->qtd_list);
+ schedule_ptds(hcd);
+
+out:
+ spin_unlock_irqrestore(&priv->lock, spinflags);
+ return retval;
+}
+
+static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
+ struct isp1760_qh *qh)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int skip_map;
+
+ WARN_ON(qh->slot == -1);
+
+ /* We need to forcefully reclaim the slot since some transfers never
+ return, e.g. interrupt transfers and NAKed bulk transfers. */
+ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
+ skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+ skip_map |= (1 << qh->slot);
+ reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
+ priv->atl_slots[qh->slot].qh = NULL;
+ priv->atl_slots[qh->slot].qtd = NULL;
+ } else {
+ skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+ skip_map |= (1 << qh->slot);
+ reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
+ priv->int_slots[qh->slot].qh = NULL;
+ priv->int_slots[qh->slot].qtd = NULL;
+ }
+
+ qh->slot = -1;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd)
+{
+ struct urb *urb;
+ int urb_was_running;
+
+ urb = qtd->urb;
+ urb_was_running = 0;
+ list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+ if (qtd->urb != urb)
+ break;
+
+ if (qtd->status >= QTD_XFER_STARTED)
+ urb_was_running = 1;
+ if (last_qtd_of_urb(qtd, qh) &&
+ (qtd->status >= QTD_XFER_COMPLETE))
+ urb_was_running = 0;
+
+ if (qtd->status == QTD_XFER_STARTED)
+ kill_transfer(hcd, urb, qh);
+ qtd->status = QTD_RETIRE;
+ }
+
+ if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+ qh->tt_buffer_dirty = 1;
+ if (usb_hub_clear_tt_buffer(urb))
+ /* Clear failed; let's hope things work anyway */
+ qh->tt_buffer_dirty = 0;
+ }
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ unsigned long spinflags;
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+ int retval = 0;
+
+ spin_lock_irqsave(&priv->lock, spinflags);
+ retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (retval)
+ goto out;
+
+ qh = urb->ep->hcpriv;
+ if (!qh) {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+ if (qtd->urb == urb) {
+ dequeue_urb_from_qtd(hcd, qh, qtd);
+ list_move(&qtd->qtd_list, &qh->qtd_list);
+ break;
+ }
+
+ urb->status = status;
+ schedule_ptds(hcd);
+
+out:
+ spin_unlock_irqrestore(&priv->lock, spinflags);
+ return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ unsigned long spinflags;
+ struct isp1760_qh *qh, *qh_iter;
+ int i;
+
+ spin_lock_irqsave(&priv->lock, spinflags);
+
+ qh = ep->hcpriv;
+ if (!qh)
+ goto out;
+
+ WARN_ON(!list_empty(&qh->qtd_list));
+
+ for (i = 0; i < QH_END; i++)
+ list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
+ if (qh_iter == qh) {
+ list_del(&qh_iter->qh_list);
+ i = QH_END;
+ break;
+ }
+ qh_free(qh);
+ ep->hcpriv = NULL;
+
+ schedule_ptds(hcd);
+
+out:
+ spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 temp, status = 0;
+ u32 mask;
+ int retval = 1;
+ unsigned long flags;
+
+ /* if !PM, root hub timers won't get shut down ... */
+ if (!HC_IS_RUNNING(hcd->state))
+ return 0;
+
+ /* init status to no-changes */
+ buf[0] = 0;
+ mask = PORT_CSC;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ temp = reg_read32(hcd->regs, HC_PORTSC1);
+
+ if (temp & PORT_OWNER) {
+ if (temp & PORT_CSC) {
+ temp &= ~PORT_CSC;
+ reg_write32(hcd->regs, HC_PORTSC1, temp);
+ goto done;
+ }
+ }
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise hub_wq wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
+ if ((temp & mask) != 0
+ || ((temp & PORT_RESUME) != 0
+ && time_after_eq(jiffies,
+ priv->reset_done))) {
+ buf [0] |= 1 << (0 + 1);
+ status = STS_PCD;
+ }
+ /* FIXME autosuspend idle root hubs */
+done:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+ struct usb_hub_descriptor *desc)
+{
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u16 temp;
+
+ desc->bDescriptorType = USB_DT_HUB;
+ /* priv 1.0, 2.3.9 says 20ms max */
+ desc->bPwrOn2PwrGood = 10;
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+ memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+ memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+ /* per-port overcurrent reporting */
+ temp = HUB_CHAR_INDV_PORT_OCPM;
+ if (HCS_PPC(priv->hcs_params))
+ /* per-port power control */
+ temp |= HUB_CHAR_INDV_PORT_LPSM;
+ else
+ /* no power switching */
+ temp |= HUB_CHAR_NO_LPSM;
+ desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static int check_reset_complete(struct usb_hcd *hcd, int index,
+ int port_status)
+{
+ if (!(port_status & PORT_CONNECT))
+ return port_status;
+
+ /* if reset finished and it's still not enabled -- handoff */
+ if (!(port_status & PORT_PE)) {
+
+ dev_info(hcd->self.controller,
+ "port %d full speed --> companion\n",
+ index + 1);
+
+ port_status |= PORT_OWNER;
+ port_status &= ~PORT_RWC_BITS;
+ reg_write32(hcd->regs, HC_PORTSC1, port_status);
+
+ } else
+ dev_info(hcd->self.controller, "port %d high speed\n",
+ index + 1);
+
+ return port_status;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+ u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u32 temp, status;
+ unsigned long flags;
+ int retval = 0;
+ unsigned selector;
+
+ /*
+ * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+ * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+ * (track current state ourselves) ... blink for diagnostics,
+ * power, "this is the one", etc. EHCI spec supports this.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = reg_read32(hcd->regs, HC_PORTSC1);
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, hub_wq needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_STAT_C_CONNECTION).
+ */
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ /* XXX error? */
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ if (temp & PORT_RESET)
+ goto error;
+
+ if (temp & PORT_SUSPEND) {
+ if ((temp & PORT_PE) == 0)
+ goto error;
+ /* resume signaling for 20 msec */
+ temp &= ~(PORT_RWC_BITS);
+ reg_write32(hcd->regs, HC_PORTSC1,
+ temp | PORT_RESUME);
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+ }
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* we auto-clear this feature */
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ reg_write32(hcd->regs, HC_PORTSC1,
+ temp & ~PORT_POWER);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ /* XXX error ?*/
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ /* GetPortStatus clears reset */
+ break;
+ default:
+ goto error;
+ }
+ reg_read32(hcd->regs, HC_USBCMD);
+ break;
+ case GetHubDescriptor:
+ isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+ buf);
+ break;
+ case GetHubStatus:
+ /* no hub-wide feature/status flags */
+ memset(buf, 0, 4);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ temp = reg_read32(hcd->regs, HC_PORTSC1);
+
+ /* wPortChange bits */
+ if (temp & PORT_CSC)
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
+
+
+ /* whoever resumes must GetPortStatus to complete it!! */
+ if (temp & PORT_RESUME) {
+ dev_err(hcd->self.controller, "Port resume should be skipped.\n");
+
+ /* Remote Wakeup received? */
+ if (!priv->reset_done) {
+ /* resume signaling for 20 msec */
+ priv->reset_done = jiffies
+ + msecs_to_jiffies(20);
+ /* check the port again */
+ mod_timer(&hcd->rh_timer, priv->reset_done);
+ }
+
+ /* resume completed? */
+ else if (time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
+ priv->reset_done = 0;
+
+ /* stop resume signaling */
+ temp = reg_read32(hcd->regs, HC_PORTSC1);
+ reg_write32(hcd->regs, HC_PORTSC1,
+ temp & ~(PORT_RWC_BITS | PORT_RESUME));
+ retval = handshake(hcd, HC_PORTSC1,
+ PORT_RESUME, 0, 2000 /* 2msec */);
+ if (retval != 0) {
+ dev_err(hcd->self.controller,
+ "port %d resume error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+ temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+ }
+ }
+
+ /* whoever resets must GetPortStatus to complete it!! */
+ if ((temp & PORT_RESET)
+ && time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= USB_PORT_STAT_C_RESET << 16;
+ priv->reset_done = 0;
+
+ /* force reset to complete */
+ reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET);
+ /* REVISIT: some hardware needs 550+ usec to clear
+ * this bit; seems too long to spin routinely...
+ */
+ retval = handshake(hcd, HC_PORTSC1,
+ PORT_RESET, 0, 750);
+ if (retval != 0) {
+ dev_err(hcd->self.controller, "port %d reset error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+
+ /* see what we found out */
+ temp = check_reset_complete(hcd, wIndex,
+ reg_read32(hcd->regs, HC_PORTSC1));
+ }
+ /*
+ * Even if OWNER is set, there's no harm letting hub_wq
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_OWNER)
+ dev_err(hcd->self.controller, "PORT_OWNER is set\n");
+
+ if (temp & PORT_CONNECT) {
+ status |= USB_PORT_STAT_CONNECTION;
+ /* status may be from integrated TT */
+ status |= USB_PORT_STAT_HIGH_SPEED;
+ }
+ if (temp & PORT_PE)
+ status |= USB_PORT_STAT_ENABLE;
+ if (temp & (PORT_SUSPEND|PORT_RESUME))
+ status |= USB_PORT_STAT_SUSPEND;
+ if (temp & PORT_RESET)
+ status |= USB_PORT_STAT_RESET;
+ if (temp & PORT_POWER)
+ status |= USB_PORT_STAT_POWER;
+
+ put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = reg_read32(hcd->regs, HC_PORTSC1);
+ if (temp & PORT_OWNER)
+ break;
+
+/* temp &= ~PORT_RWC_BITS; */
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE);
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ if ((temp & PORT_PE) == 0
+ || (temp & PORT_RESET) != 0)
+ goto error;
+
+ reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND);
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ reg_write32(hcd->regs, HC_PORTSC1,
+ temp | PORT_POWER);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (temp & PORT_RESUME)
+ goto error;
+ /* line status bits may report this as low speed,
+ * which can be fine if this root hub has a
+ * transaction translator built in.
+ */
+ if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+ && PORT_USB11(temp)) {
+ temp |= PORT_OWNER;
+ } else {
+ temp |= PORT_RESET;
+ temp &= ~PORT_PE;
+
+ /*
+ * caller must wait, then call GetPortStatus
+ * usb 2.0 spec says 50 ms resets on root
+ */
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(50);
+ }
+ reg_write32(hcd->regs, HC_PORTSC1, temp);
+ break;
+ default:
+ goto error;
+ }
+ reg_read32(hcd->regs, HC_USBCMD);
+ break;
+
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return retval;
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 fr;
+
+ fr = reg_read32(hcd->regs, HC_FRINDEX);
+ return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 temp;
+
+ del_timer(&errata2_timer);
+
+ isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
+ NULL, 0);
+ mdelay(20);
+
+ spin_lock_irq(&priv->lock);
+ ehci_reset(hcd);
+ /* Disable IRQ */
+ temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+ reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
+ spin_unlock_irq(&priv->lock);
+
+ reg_write32(hcd->regs, HC_CONFIGFLAG, 0);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+ u32 command, temp;
+
+ isp1760_stop(hcd);
+ temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+ reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
+
+ command = reg_read32(hcd->regs, HC_USBCMD);
+ command &= ~CMD_RUN;
+ reg_write32(hcd->regs, HC_USBCMD, command);
+}
+
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct isp1760_qh *qh = ep->hcpriv;
+ unsigned long spinflags;
+
+ if (!qh)
+ return;
+
+ spin_lock_irqsave(&priv->lock, spinflags);
+ qh->tt_buffer_dirty = 0;
+ schedule_ptds(hcd);
+ spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
+static const struct hc_driver isp1760_hc_driver = {
+ .description = "isp1760-hcd",
+ .product_desc = "NXP ISP1760 USB Host Controller",
+ .hcd_priv_size = sizeof(struct isp1760_hcd *),
+ .irq = isp1760_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = isp1760_hc_setup,
+ .start = isp1760_run,
+ .stop = isp1760_stop,
+ .shutdown = isp1760_shutdown,
+ .urb_enqueue = isp1760_urb_enqueue,
+ .urb_dequeue = isp1760_urb_dequeue,
+ .endpoint_disable = isp1760_endpoint_disable,
+ .get_frame_number = isp1760_get_frame,
+ .hub_status_data = isp1760_hub_status_data,
+ .hub_control = isp1760_hub_control,
+ .clear_tt_buffer_complete = isp1760_clear_tt_buffer_complete,
+};
+
+int __init isp1760_init_kmem_once(void)
+{
+ urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
+ sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
+ SLAB_MEM_SPREAD, NULL);
+
+ if (!urb_listitem_cachep)
+ return -ENOMEM;
+
+ qtd_cachep = kmem_cache_create("isp1760_qtd",
+ sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+ SLAB_MEM_SPREAD, NULL);
+
+ if (!qtd_cachep)
+ return -ENOMEM;
+
+ qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+ 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+ if (!qh_cachep) {
+ kmem_cache_destroy(qtd_cachep);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void isp1760_deinit_kmem_cache(void)
+{
+ kmem_cache_destroy(qtd_cachep);
+ kmem_cache_destroy(qh_cachep);
+ kmem_cache_destroy(urb_listitem_cachep);
+}
+
+int isp1760_hcd_register(struct isp1760_hcd *priv, void __iomem *regs,
+ struct resource *mem, int irq, unsigned long irqflags,
+ struct device *dev)
+{
+ struct usb_hcd *hcd;
+ int ret;
+
+ hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ *(struct isp1760_hcd **)hcd->hcd_priv = priv;
+
+ priv->hcd = hcd;
+
+ init_memory(priv);
+
+ hcd->irq = irq;
+ hcd->regs = regs;
+ hcd->rsrc_start = mem->start;
+ hcd->rsrc_len = resource_size(mem);
+
+ /* This driver doesn't support wakeup requests */
+ hcd->cant_recv_wakeups = 1;
+
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto error;
+
+ device_wakeup_enable(hcd->self.controller);
+
+ return 0;
+
+error:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+void isp1760_hcd_unregister(struct isp1760_hcd *priv)
+{
+ if (!priv->hcd)
+ return;
+
+ usb_remove_hcd(priv->hcd);
+ usb_put_hcd(priv->hcd);
+}