[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/usb/phy/phy-msm-usb.c b/src/kernel/linux/v4.14/drivers/usb/phy/phy-msm-usb.c
new file mode 100644
index 0000000..3d0dd2f
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/usb/phy/phy-msm-usb.c
@@ -0,0 +1,2085 @@
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/reboot.h>
+#include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb_hw.h>
+#include <linux/regulator/consumer.h>
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
+ * only configuration.
+ * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+ OTG_NO_CONTROL = 0,
+ OTG_PHY_CONTROL,
+ OTG_PMIC_CONTROL,
+ OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+ INVALID_PHY = 0,
+ CI_45NM_INTEGRATED_PHY,
+ SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX 1500
+#define IUNIT 100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * USB_CHG_STATE_DETECTED USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER Invalid USB charger.
+ * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
+ * on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
+ * IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+ USB_INVALID_CHARGER = 0,
+ USB_SDP_CHARGER,
+ USB_DCP_CHARGER,
+ USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ * for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ * "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+ int *phy_init_seq;
+ int phy_init_sz;
+ void (*vbus_power)(bool on);
+ unsigned power_budget;
+ enum usb_dr_mode mode;
+ enum otg_control_type otg_control;
+ enum msm_usb_phy_type phy_type;
+ void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ * detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ * and controller driver therefore enables pull-up explicitly before
+ * starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
+ * @switch_gpio: Descriptor for GPIO used to control external Dual
+ * SPDT USB Switch.
+ * @reboot: Used to inform the driver to route USB D+/D- line to Device
+ * connector
+ */
+struct msm_otg {
+ struct usb_phy phy;
+ struct msm_otg_platform_data *pdata;
+ int irq;
+ struct clk *clk;
+ struct clk *pclk;
+ struct clk *core_clk;
+ void __iomem *regs;
+#define ID 0
+#define B_SESS_VLD 1
+ unsigned long inputs;
+ struct work_struct sm_work;
+ atomic_t in_lpm;
+ int async_int;
+ unsigned cur_power;
+ int phy_number;
+ struct delayed_work chg_work;
+ enum usb_chg_state chg_state;
+ enum usb_chg_type chg_type;
+ u8 dcd_retries;
+ struct regulator *v3p3;
+ struct regulator *v1p8;
+ struct regulator *vddcx;
+ struct regulator_bulk_data supplies[3];
+
+ struct reset_control *phy_rst;
+ struct reset_control *link_rst;
+ int vdd_levels[3];
+
+ bool manual_pullup;
+
+ struct gpio_desc *switch_gpio;
+ struct notifier_block reboot;
+};
+
+#define MSM_USB_BASE (motg->regs)
+#define DRIVER_NAME "msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
+#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
+
+#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */
+#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */
+#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */
+#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */
+
+#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */
+#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */
+#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */
+#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */
+
+#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
+#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
+#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */
+
+enum vdd_levels {
+ VDD_LEVEL_NONE = 0,
+ VDD_LEVEL_MIN,
+ VDD_LEVEL_MAX,
+};
+
+static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
+{
+ int ret = 0;
+
+ if (init) {
+ ret = regulator_set_voltage(motg->vddcx,
+ motg->vdd_levels[VDD_LEVEL_MIN],
+ motg->vdd_levels[VDD_LEVEL_MAX]);
+ if (ret) {
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
+ return ret;
+ }
+
+ ret = regulator_enable(motg->vddcx);
+ if (ret)
+ dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
+ } else {
+ ret = regulator_set_voltage(motg->vddcx, 0,
+ motg->vdd_levels[VDD_LEVEL_MAX]);
+ if (ret)
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
+ ret = regulator_disable(motg->vddcx);
+ if (ret)
+ dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
+ }
+
+ return ret;
+}
+
+static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
+{
+ int rc = 0;
+
+ if (init) {
+ rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
+ USB_PHY_3P3_VOL_MAX);
+ if (rc) {
+ dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
+ goto exit;
+ }
+ rc = regulator_enable(motg->v3p3);
+ if (rc) {
+ dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
+ goto exit;
+ }
+ rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
+ USB_PHY_1P8_VOL_MAX);
+ if (rc) {
+ dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
+ goto disable_3p3;
+ }
+ rc = regulator_enable(motg->v1p8);
+ if (rc) {
+ dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
+ goto disable_3p3;
+ }
+
+ return 0;
+ }
+
+ regulator_disable(motg->v1p8);
+disable_3p3:
+ regulator_disable(motg->v3p3);
+exit:
+ return rc;
+}
+
+static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
+{
+ int ret = 0;
+
+ if (on) {
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
+ if (ret < 0) {
+ pr_err("Could not set HPM for v1p8\n");
+ return ret;
+ }
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
+ if (ret < 0) {
+ pr_err("Could not set HPM for v3p3\n");
+ regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
+ return ret;
+ }
+ } else {
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
+ if (ret < 0)
+ pr_err("Could not set LPM for v1p8\n");
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
+ if (ret < 0)
+ pr_err("Could not set LPM for v3p3\n");
+ }
+
+ pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
+ return ret < 0 ? ret : 0;
+}
+
+static int ulpi_read(struct usb_phy *phy, u32 reg)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ /* initiate read operation */
+ writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(phy->dev, "ulpi_read: timeout %08x\n",
+ readl(USB_ULPI_VIEWPORT));
+ return -ETIMEDOUT;
+ }
+ return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ /* initiate write operation */
+ writel(ULPI_RUN | ULPI_WRITE |
+ ULPI_ADDR(reg) | ULPI_DATA(val),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(phy->dev, "ulpi_write: timeout\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static struct usb_phy_io_ops msm_otg_io_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ int *seq = pdata->phy_init_seq, idx;
+ u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
+
+ for (idx = 0; idx < pdata->phy_init_sz; idx++) {
+ if (seq[idx] == -1)
+ continue;
+
+ dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
+ seq[idx], addr + idx);
+ ulpi_write(&motg->phy, seq[idx], addr + idx);
+ }
+}
+
+static int msm_phy_notify_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int val;
+
+ if (motg->manual_pullup) {
+ val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
+ usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A));
+ }
+
+ /*
+ * Put the transceiver in non-driving mode. Otherwise host
+ * may not detect soft-disconnection.
+ */
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+
+ return 0;
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+ int ret;
+
+ if (assert)
+ ret = reset_control_assert(motg->link_rst);
+ else
+ ret = reset_control_deassert(motg->link_rst);
+
+ if (ret)
+ dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+ assert ? "assert" : "deassert");
+
+ return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+ int ret = 0;
+
+ if (motg->phy_rst)
+ ret = reset_control_reset(motg->phy_rst);
+
+ if (ret)
+ dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
+ return ret;
+}
+
+static int msm_link_reset(struct msm_otg *motg)
+{
+ u32 val;
+ int ret;
+
+ ret = msm_otg_link_clk_reset(motg, 1);
+ if (ret)
+ return ret;
+
+ /* wait for 1ms delay as suggested in HPG. */
+ usleep_range(1000, 1200);
+
+ ret = msm_otg_link_clk_reset(motg, 0);
+ if (ret)
+ return ret;
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
+ /* put transceiver in serial mode as part of reset */
+ val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+ writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
+
+ return 0;
+}
+
+static int msm_otg_reset(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ writel(USBCMD_RESET, USB_USBCMD);
+ while (cnt < LINK_RESET_TIMEOUT_USEC) {
+ if (!(readl(USB_USBCMD) & USBCMD_RESET))
+ break;
+ udelay(1);
+ cnt++;
+ }
+ if (cnt >= LINK_RESET_TIMEOUT_USEC)
+ return -ETIMEDOUT;
+
+ /* select ULPI phy and clear other status/control bits in PORTSC */
+ writel(PORTSC_PTS_ULPI, USB_PORTSC);
+
+ writel(0x0, USB_AHBBURST);
+ writel(0x08, USB_AHBMODE);
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+ return 0;
+}
+
+static void msm_phy_reset(struct msm_otg *motg)
+{
+ void __iomem *addr;
+
+ if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
+ msm_otg_phy_clk_reset(motg);
+ return;
+ }
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ /* Assert USB PHY_POR */
+ writel(readl(addr) | PHY_POR_ASSERT, addr);
+
+ /*
+ * wait for minimum 10 microseconds as suggested in HPG.
+ * Use a slightly larger value since the exact value didn't
+ * work 100% of the time.
+ */
+ udelay(12);
+
+ /* Deassert USB PHY_POR */
+ writel(readl(addr) & ~PHY_POR_ASSERT, addr);
+}
+
+static int msm_usb_reset(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int ret;
+
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ ret = msm_link_reset(motg);
+ if (ret) {
+ dev_err(phy->dev, "phy_reset failed\n");
+ return ret;
+ }
+
+ ret = msm_otg_reset(&motg->phy);
+ if (ret) {
+ dev_err(phy->dev, "link reset failed\n");
+ return ret;
+ }
+
+ msleep(100);
+
+ /* Reset USB PHY after performing USB Link RESET */
+ msm_phy_reset(motg);
+
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ return 0;
+}
+
+static int msm_phy_init(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ u32 val, ulpi_val = 0;
+
+ /* Program USB PHY Override registers. */
+ ulpi_init(motg);
+
+ /*
+ * It is recommended in HPG to reset USB PHY after programming
+ * USB PHY Override registers.
+ */
+ msm_phy_reset(motg);
+
+ if (pdata->otg_control == OTG_PHY_CONTROL) {
+ val = readl(USB_OTGSC);
+ if (pdata->mode == USB_DR_MODE_OTG) {
+ ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+ val |= OTGSC_IDIE | OTGSC_BSVIE;
+ } else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
+ ulpi_val = ULPI_INT_SESS_VALID;
+ val |= OTGSC_BSVIE;
+ }
+ writel(val, USB_OTGSC);
+ ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
+ ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
+ }
+
+ if (motg->manual_pullup) {
+ val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
+ ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A));
+
+ val = readl(USB_GENCONFIG_2);
+ val |= GENCONFIG_2_SESS_VLD_CTRL_EN;
+ writel(val, USB_GENCONFIG_2);
+
+ val = readl(USB_USBCMD);
+ val |= USBCMD_SESS_VLD_CTRL;
+ writel(val, USB_USBCMD);
+
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+ }
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
+ return 0;
+}
+
+#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
+#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
+
+#ifdef CONFIG_PM
+
+static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
+{
+ int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
+ int min_vol;
+ int ret;
+
+ if (high)
+ min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
+ else
+ min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
+
+ ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
+ if (ret) {
+ pr_err("Cannot set vddcx voltage\n");
+ return ret;
+ }
+
+ pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+ return ret;
+}
+
+static int msm_otg_suspend(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ struct usb_bus *bus = phy->otg->host;
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ void __iomem *addr;
+ int cnt = 0;
+
+ if (atomic_read(&motg->in_lpm))
+ return 0;
+
+ disable_irq(motg->irq);
+ /*
+ * Chipidea 45-nm PHY suspend sequence:
+ *
+ * Interrupt Latch Register auto-clear feature is not present
+ * in all PHY versions. Latch register is clear on read type.
+ * Clear latch register to avoid spurious wakeup from
+ * low power mode (LPM).
+ *
+ * PHY comparators are disabled when PHY enters into low power
+ * mode (LPM). Keep PHY comparators ON in LPM only when we expect
+ * VBUS/Id notifications from USB PHY. Otherwise turn off USB
+ * PHY comparators. This save significant amount of power.
+ *
+ * PLL is not turned off when PHY enters into low power mode (LPM).
+ * Disable PLL for maximum power savings.
+ */
+
+ if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
+ ulpi_read(phy, 0x14);
+ if (pdata->otg_control == OTG_PHY_CONTROL)
+ ulpi_write(phy, 0x01, 0x30);
+ ulpi_write(phy, 0x08, 0x09);
+ }
+
+ /*
+ * PHY may take some time or even fail to enter into low power
+ * mode (LPM). Hence poll for 500 msec and reset the PHY and link
+ * in failure case.
+ */
+ writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+ if (readl(USB_PORTSC) & PORTSC_PHCD)
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
+ dev_err(phy->dev, "Unable to suspend PHY\n");
+ msm_otg_reset(phy);
+ enable_irq(motg->irq);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * PHY has capability to generate interrupt asynchronously in low
+ * power mode (LPM). This interrupt is level triggered. So USB IRQ
+ * line must be disabled till async interrupt enable bit is cleared
+ * in USBCMD register. Assert STP (ULPI interface STOP signal) to
+ * block data communication from PHY.
+ */
+ writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL)
+ writel(readl(addr) | PHY_RETEN, addr);
+
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+ msm_hsusb_ldo_set_mode(motg, 0);
+ msm_hsusb_config_vddcx(motg, 0);
+ }
+
+ if (device_may_wakeup(phy->dev))
+ enable_irq_wake(motg->irq);
+ if (bus)
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+ atomic_set(&motg->in_lpm, 1);
+ enable_irq(motg->irq);
+
+ dev_info(phy->dev, "USB in low power mode\n");
+
+ return 0;
+}
+
+static int msm_otg_resume(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ struct usb_bus *bus = phy->otg->host;
+ void __iomem *addr;
+ int cnt = 0;
+ unsigned temp;
+
+ if (!atomic_read(&motg->in_lpm))
+ return 0;
+
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ msm_hsusb_ldo_set_mode(motg, 1);
+ msm_hsusb_config_vddcx(motg, 1);
+ writel(readl(addr) & ~PHY_RETEN, addr);
+ }
+
+ temp = readl(USB_USBCMD);
+ temp &= ~ASYNC_INTR_CTRL;
+ temp &= ~ULPI_STP_CTRL;
+ writel(temp, USB_USBCMD);
+
+ /*
+ * PHY comes out of low power mode (LPM) in case of wakeup
+ * from asynchronous interrupt.
+ */
+ if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+ goto skip_phy_resume;
+
+ writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_RESUME_TIMEOUT_USEC) {
+ if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
+ /*
+ * This is a fatal error. Reset the link and
+ * PHY. USB state can not be restored. Re-insertion
+ * of USB cable is the only way to get USB working.
+ */
+ dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
+ msm_otg_reset(phy);
+ }
+
+skip_phy_resume:
+ if (device_may_wakeup(phy->dev))
+ disable_irq_wake(motg->irq);
+ if (bus)
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+ atomic_set(&motg->in_lpm, 0);
+
+ if (motg->async_int) {
+ motg->async_int = 0;
+ pm_runtime_put(phy->dev);
+ enable_irq(motg->irq);
+ }
+
+ dev_info(phy->dev, "USB exited from low power mode\n");
+
+ return 0;
+}
+#endif
+
+static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
+{
+ if (motg->cur_power == mA)
+ return;
+
+ /* TODO: Notify PMIC about available current */
+ dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
+ motg->cur_power = mA;
+}
+
+static void msm_otg_start_host(struct usb_phy *phy, int on)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ struct usb_hcd *hcd;
+
+ if (!phy->otg->host)
+ return;
+
+ hcd = bus_to_hcd(phy->otg->host);
+
+ if (on) {
+ dev_dbg(phy->dev, "host on\n");
+
+ if (pdata->vbus_power)
+ pdata->vbus_power(1);
+ /*
+ * Some boards have a switch cotrolled by gpio
+ * to enable/disable internal HUB. Enable internal
+ * HUB before kicking the host.
+ */
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+ usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ device_wakeup_enable(hcd->self.controller);
+#endif
+ } else {
+ dev_dbg(phy->dev, "host off\n");
+
+#ifdef CONFIG_USB
+ usb_remove_hcd(hcd);
+#endif
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_UNDEFINED);
+ if (pdata->vbus_power)
+ pdata->vbus_power(0);
+ }
+}
+
+static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
+ struct usb_hcd *hcd;
+
+ /*
+ * Fail host registration if this board can support
+ * only peripheral configuration.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
+ dev_info(otg->usb_phy->dev, "Host mode is not supported\n");
+ return -ENODEV;
+ }
+
+ if (!host) {
+ if (otg->state == OTG_STATE_A_HOST) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ msm_otg_start_host(otg->usb_phy, 0);
+ otg->host = NULL;
+ otg->state = OTG_STATE_UNDEFINED;
+ schedule_work(&motg->sm_work);
+ } else {
+ otg->host = NULL;
+ }
+
+ return 0;
+ }
+
+ hcd = bus_to_hcd(host);
+ hcd->power_budget = motg->pdata->power_budget;
+
+ otg->host = host;
+ dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
+
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+
+ return 0;
+}
+
+static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+
+ if (!phy->otg->gadget)
+ return;
+
+ if (on) {
+ dev_dbg(phy->dev, "gadget on\n");
+ /*
+ * Some boards have a switch cotrolled by gpio
+ * to enable/disable internal HUB. Disable internal
+ * HUB before kicking the gadget.
+ */
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+ usb_gadget_vbus_connect(phy->otg->gadget);
+ } else {
+ dev_dbg(phy->dev, "gadget off\n");
+ usb_gadget_vbus_disconnect(phy->otg->gadget);
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_UNDEFINED);
+ }
+
+}
+
+static int msm_otg_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
+
+ /*
+ * Fail peripheral registration if this board can support
+ * only host configuration.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_HOST) {
+ dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n");
+ return -ENODEV;
+ }
+
+ if (!gadget) {
+ if (otg->state == OTG_STATE_B_PERIPHERAL) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ msm_otg_start_peripheral(otg->usb_phy, 0);
+ otg->gadget = NULL;
+ otg->state = OTG_STATE_UNDEFINED;
+ schedule_work(&motg->sm_work);
+ } else {
+ otg->gadget = NULL;
+ }
+
+ return 0;
+ }
+ otg->gadget = gadget;
+ dev_dbg(otg->usb_phy->dev,
+ "peripheral driver registered w/ tranceiver\n");
+
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+
+ return 0;
+}
+
+static bool msm_chg_check_secondary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ ret = chg_det & (1 << 4);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x87);
+ ret = chg_det & 1;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_enable_secondary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn off charger block */
+ chg_det |= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ /* control chg block via ULPI */
+ chg_det &= ~(1 << 3);
+ ulpi_write(phy, chg_det, 0x34);
+ /* put it in host mode for enabling D- source */
+ chg_det &= ~(1 << 2);
+ ulpi_write(phy, chg_det, 0x34);
+ /* Turn on chg detect block */
+ chg_det &= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ /* enable chg detection */
+ chg_det &= ~(1 << 0);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /*
+ * Configure DM as current source, DP as current sink
+ * and enable battery charging comparators.
+ */
+ ulpi_write(phy, 0x8, 0x85);
+ ulpi_write(phy, 0x2, 0x85);
+ ulpi_write(phy, 0x1, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool msm_chg_check_primary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ ret = chg_det & (1 << 4);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x87);
+ ret = chg_det & 1;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_enable_primary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* enable chg detection */
+ chg_det &= ~(1 << 0);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /*
+ * Configure DP as current source, DM as current sink
+ * and enable battery charging comparators.
+ */
+ ulpi_write(phy, 0x2, 0x85);
+ ulpi_write(phy, 0x1, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool msm_chg_check_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 line_state;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ line_state = ulpi_read(phy, 0x15);
+ ret = !(line_state & 1);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ line_state = ulpi_read(phy, 0x87);
+ ret = line_state & 2;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_disable_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ chg_det &= ~(1 << 5);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ ulpi_write(phy, 0x10, 0x86);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_enable_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn on D+ current source */
+ chg_det |= (1 << 5);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Data contact detection enable */
+ ulpi_write(phy, 0x10, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_block_on(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 func_ctrl, chg_det;
+
+ /* put the controller in non-driving mode */
+ func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
+ func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* control chg block via ULPI */
+ chg_det &= ~(1 << 3);
+ ulpi_write(phy, chg_det, 0x34);
+ /* Turn on chg detect block */
+ chg_det &= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Clear charger detecting control bits */
+ ulpi_write(phy, 0x3F, 0x86);
+ /* Clear alt interrupt latch and enable bits */
+ ulpi_write(phy, 0x1F, 0x92);
+ ulpi_write(phy, 0x1F, 0x95);
+ udelay(100);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_block_off(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 func_ctrl, chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn off charger block */
+ chg_det |= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Clear charger detecting control bits */
+ ulpi_write(phy, 0x3F, 0x86);
+ /* Clear alt interrupt latch and enable bits */
+ ulpi_write(phy, 0x1F, 0x92);
+ ulpi_write(phy, 0x1F, 0x95);
+ break;
+ default:
+ break;
+ }
+
+ /* put the controller in normal mode */
+ func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
+ func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+ ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
+}
+
+#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */
+#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */
+#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */
+#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */
+static void msm_chg_detect_work(struct work_struct *w)
+{
+ struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
+ struct usb_phy *phy = &motg->phy;
+ bool is_dcd, tmout, vout;
+ unsigned long delay;
+
+ dev_dbg(phy->dev, "chg detection work\n");
+ switch (motg->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ pm_runtime_get_sync(phy->dev);
+ msm_chg_block_on(motg);
+ msm_chg_enable_dcd(motg);
+ motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+ motg->dcd_retries = 0;
+ delay = MSM_CHG_DCD_POLL_TIME;
+ break;
+ case USB_CHG_STATE_WAIT_FOR_DCD:
+ is_dcd = msm_chg_check_dcd(motg);
+ tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
+ if (is_dcd || tmout) {
+ msm_chg_disable_dcd(motg);
+ msm_chg_enable_primary_det(motg);
+ delay = MSM_CHG_PRIMARY_DET_TIME;
+ motg->chg_state = USB_CHG_STATE_DCD_DONE;
+ } else {
+ delay = MSM_CHG_DCD_POLL_TIME;
+ }
+ break;
+ case USB_CHG_STATE_DCD_DONE:
+ vout = msm_chg_check_primary_det(motg);
+ if (vout) {
+ msm_chg_enable_secondary_det(motg);
+ delay = MSM_CHG_SECONDARY_DET_TIME;
+ motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+ } else {
+ motg->chg_type = USB_SDP_CHARGER;
+ motg->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ }
+ break;
+ case USB_CHG_STATE_PRIMARY_DONE:
+ vout = msm_chg_check_secondary_det(motg);
+ if (vout)
+ motg->chg_type = USB_DCP_CHARGER;
+ else
+ motg->chg_type = USB_CDP_CHARGER;
+ motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
+ /* fall through */
+ case USB_CHG_STATE_SECONDARY_DONE:
+ motg->chg_state = USB_CHG_STATE_DETECTED;
+ case USB_CHG_STATE_DETECTED:
+ msm_chg_block_off(motg);
+ dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
+ schedule_work(&motg->sm_work);
+ return;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&motg->chg_work, delay);
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ u32 otgsc = readl(USB_OTGSC);
+
+ switch (pdata->mode) {
+ case USB_DR_MODE_OTG:
+ if (pdata->otg_control == OTG_PHY_CONTROL) {
+ if (otgsc & OTGSC_ID)
+ set_bit(ID, &motg->inputs);
+ else
+ clear_bit(ID, &motg->inputs);
+
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ } else if (pdata->otg_control == OTG_USER_CONTROL) {
+ set_bit(ID, &motg->inputs);
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ }
+ break;
+ case USB_DR_MODE_HOST:
+ clear_bit(ID, &motg->inputs);
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ set_bit(ID, &motg->inputs);
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+ struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+ struct usb_otg *otg = motg->phy.otg;
+
+ switch (otg->state) {
+ case OTG_STATE_UNDEFINED:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n");
+ msm_otg_reset(otg->usb_phy);
+ msm_otg_init_sm(motg);
+ otg->state = OTG_STATE_B_IDLE;
+ /* FALL THROUGH */
+ case OTG_STATE_B_IDLE:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n");
+ if (!test_bit(ID, &motg->inputs) && otg->host) {
+ /* disable BSV bit */
+ writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+ msm_otg_start_host(otg->usb_phy, 1);
+ otg->state = OTG_STATE_A_HOST;
+ } else if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ switch (motg->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ msm_chg_detect_work(&motg->chg_work.work);
+ break;
+ case USB_CHG_STATE_DETECTED:
+ switch (motg->chg_type) {
+ case USB_DCP_CHARGER:
+ msm_otg_notify_charger(motg,
+ IDEV_CHG_MAX);
+ break;
+ case USB_CDP_CHARGER:
+ msm_otg_notify_charger(motg,
+ IDEV_CHG_MAX);
+ msm_otg_start_peripheral(otg->usb_phy,
+ 1);
+ otg->state
+ = OTG_STATE_B_PERIPHERAL;
+ break;
+ case USB_SDP_CHARGER:
+ msm_otg_notify_charger(motg, IUNIT);
+ msm_otg_start_peripheral(otg->usb_phy,
+ 1);
+ otg->state
+ = OTG_STATE_B_PERIPHERAL;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ /*
+ * If charger detection work is pending, decrement
+ * the pm usage counter to balance with the one that
+ * is incremented in charger detection work.
+ */
+ if (cancel_delayed_work_sync(&motg->chg_work)) {
+ pm_runtime_put_sync(otg->usb_phy->dev);
+ msm_otg_reset(otg->usb_phy);
+ }
+ msm_otg_notify_charger(motg, 0);
+ motg->chg_state = USB_CHG_STATE_UNDEFINED;
+ motg->chg_type = USB_INVALID_CHARGER;
+ }
+
+ if (otg->state == OTG_STATE_B_IDLE)
+ pm_runtime_put_sync(otg->usb_phy->dev);
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
+ if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+ !test_bit(ID, &motg->inputs)) {
+ msm_otg_notify_charger(motg, 0);
+ msm_otg_start_peripheral(otg->usb_phy, 0);
+ motg->chg_state = USB_CHG_STATE_UNDEFINED;
+ motg->chg_type = USB_INVALID_CHARGER;
+ otg->state = OTG_STATE_B_IDLE;
+ msm_otg_reset(otg->usb_phy);
+ schedule_work(w);
+ }
+ break;
+ case OTG_STATE_A_HOST:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n");
+ if (test_bit(ID, &motg->inputs)) {
+ msm_otg_start_host(otg->usb_phy, 0);
+ otg->state = OTG_STATE_B_IDLE;
+ msm_otg_reset(otg->usb_phy);
+ schedule_work(w);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+ struct msm_otg *motg = data;
+ struct usb_phy *phy = &motg->phy;
+ u32 otgsc = 0;
+
+ if (atomic_read(&motg->in_lpm)) {
+ disable_irq_nosync(irq);
+ motg->async_int = 1;
+ pm_runtime_get(phy->dev);
+ return IRQ_HANDLED;
+ }
+
+ otgsc = readl(USB_OTGSC);
+ if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+ return IRQ_NONE;
+
+ if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+ if (otgsc & OTGSC_ID)
+ set_bit(ID, &motg->inputs);
+ else
+ clear_bit(ID, &motg->inputs);
+ dev_dbg(phy->dev, "ID set/clear\n");
+ pm_runtime_get_noresume(phy->dev);
+ } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ dev_dbg(phy->dev, "BSV set/clear\n");
+ pm_runtime_get_noresume(phy->dev);
+ }
+
+ writel(otgsc, USB_OTGSC);
+ schedule_work(&motg->sm_work);
+ return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+ struct msm_otg *motg = s->private;
+ struct usb_otg *otg = motg->phy.otg;
+
+ switch (otg->state) {
+ case OTG_STATE_A_HOST:
+ seq_puts(s, "host\n");
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ seq_puts(s, "peripheral\n");
+ break;
+ default:
+ seq_puts(s, "none\n");
+ break;
+ }
+
+ return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct msm_otg *motg = s->private;
+ char buf[16];
+ struct usb_otg *otg = motg->phy.otg;
+ int status = count;
+ enum usb_dr_mode req_mode;
+
+ memset(buf, 0x00, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+ status = -EFAULT;
+ goto out;
+ }
+
+ if (!strncmp(buf, "host", 4)) {
+ req_mode = USB_DR_MODE_HOST;
+ } else if (!strncmp(buf, "peripheral", 10)) {
+ req_mode = USB_DR_MODE_PERIPHERAL;
+ } else if (!strncmp(buf, "none", 4)) {
+ req_mode = USB_DR_MODE_UNKNOWN;
+ } else {
+ status = -EINVAL;
+ goto out;
+ }
+
+ switch (req_mode) {
+ case USB_DR_MODE_UNKNOWN:
+ switch (otg->state) {
+ case OTG_STATE_A_HOST:
+ case OTG_STATE_B_PERIPHERAL:
+ set_bit(ID, &motg->inputs);
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ switch (otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_HOST:
+ set_bit(ID, &motg->inputs);
+ set_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case USB_DR_MODE_HOST:
+ switch (otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_B_PERIPHERAL:
+ clear_bit(ID, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ default:
+ goto out;
+ }
+
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+out:
+ return status;
+}
+
+static const struct file_operations msm_otg_mode_fops = {
+ .open = msm_otg_mode_open,
+ .read = seq_read,
+ .write = msm_otg_mode_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+ msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+ if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+ return -ENODEV;
+
+ msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+ msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+ if (!msm_otg_dbg_mode) {
+ debugfs_remove(msm_otg_dbg_root);
+ msm_otg_dbg_root = NULL;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+ debugfs_remove(msm_otg_dbg_mode);
+ debugfs_remove(msm_otg_dbg_root);
+}
+
+static const struct of_device_id msm_otg_dt_match[] = {
+ {
+ .compatible = "qcom,usb-otg-ci",
+ .data = (void *) CI_45NM_INTEGRATED_PHY
+ },
+ {
+ .compatible = "qcom,usb-otg-snps",
+ .data = (void *) SNPS_28NM_INTEGRATED_PHY
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
+
+static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
+ struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
+
+ if (event)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+
+ if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ /* Switch D+/D- lines to Device connector */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ } else {
+ /* Switch D+/D- lines to Hub */
+ gpiod_set_value_cansleep(motg->switch_gpio, 1);
+ }
+
+ schedule_work(&motg->sm_work);
+
+ return NOTIFY_DONE;
+}
+
+static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct usb_phy *usb_phy = container_of(nb, struct usb_phy, id_nb);
+ struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
+
+ if (event)
+ clear_bit(ID, &motg->inputs);
+ else
+ set_bit(ID, &motg->inputs);
+
+ schedule_work(&motg->sm_work);
+
+ return NOTIFY_DONE;
+}
+
+static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata;
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop;
+ int len, ret, words;
+ u32 val, tmp[3];
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ motg->pdata = pdata;
+
+ pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
+ if (!pdata->phy_type)
+ return 1;
+
+ motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
+ if (IS_ERR(motg->link_rst))
+ return PTR_ERR(motg->link_rst);
+
+ motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
+ if (IS_ERR(motg->phy_rst))
+ motg->phy_rst = NULL;
+
+ pdata->mode = usb_get_dr_mode(&pdev->dev);
+ if (pdata->mode == USB_DR_MODE_UNKNOWN)
+ pdata->mode = USB_DR_MODE_OTG;
+
+ pdata->otg_control = OTG_PHY_CONTROL;
+ if (!of_property_read_u32(node, "qcom,otg-control", &val))
+ if (val == OTG_PMIC_CONTROL)
+ pdata->otg_control = val;
+
+ if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
+ motg->phy_number = val;
+
+ motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
+ motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
+ motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
+
+ if (of_get_property(node, "qcom,vdd-levels", &len) &&
+ len == sizeof(tmp)) {
+ of_property_read_u32_array(node, "qcom,vdd-levels",
+ tmp, len / sizeof(*tmp));
+ motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
+ motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
+ motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
+ }
+
+ motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup");
+
+ motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(motg->switch_gpio))
+ return PTR_ERR(motg->switch_gpio);
+
+ prop = of_find_property(node, "qcom,phy-init-sequence", &len);
+ if (!prop || !len)
+ return 0;
+
+ words = len / sizeof(u32);
+
+ if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
+ dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
+ return 0;
+ }
+
+ pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
+ if (!pdata->phy_init_seq)
+ return 0;
+
+ ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
+ pdata->phy_init_seq, words);
+ if (!ret)
+ pdata->phy_init_sz = words;
+
+ return 0;
+}
+
+static int msm_otg_reboot_notify(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ struct msm_otg *motg = container_of(this, struct msm_otg, reboot);
+
+ /*
+ * Ensure that D+/D- lines are routed to uB connector, so
+ * we could load bootloader/kernel at next reboot
+ */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ return NOTIFY_DONE;
+}
+
+static int msm_otg_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
+ struct msm_otg_platform_data *pdata;
+ struct resource *res;
+ struct msm_otg *motg;
+ struct usb_phy *phy;
+ void __iomem *phy_select;
+
+ motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
+ if (!motg)
+ return -ENOMEM;
+
+ motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
+ if (!motg->phy.otg)
+ return -ENOMEM;
+
+ phy = &motg->phy;
+ phy->dev = &pdev->dev;
+
+ motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
+ if (IS_ERR(motg->clk)) {
+ dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+ return PTR_ERR(motg->clk);
+ }
+
+ /*
+ * If USB Core is running its protocol engine based on CORE CLK,
+ * CORE CLK must be running at >55Mhz for correct HSUSB
+ * operation and USB core cannot tolerate frequency changes on
+ * CORE CLK.
+ */
+ motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
+ if (IS_ERR(motg->pclk)) {
+ dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+ return PTR_ERR(motg->pclk);
+ }
+
+ /*
+ * USB core clock is not present on all MSM chips. This
+ * clock is introduced to remove the dependency on AXI
+ * bus frequency.
+ */
+ motg->core_clk = devm_clk_get(&pdev->dev,
+ np ? "alt_core" : "usb_hs_core_clk");
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!motg->regs)
+ return -ENOMEM;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ if (!np)
+ return -ENXIO;
+ ret = msm_otg_read_dt(pdev, motg);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * NOTE: The PHYs can be multiplexed between the chipidea controller
+ * and the dwc3 controller, using a single bit. It is important that
+ * the dwc3 driver does not set this bit in an incompatible way.
+ */
+ if (motg->phy_number) {
+ phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
+ if (!phy_select)
+ return -ENOMEM;
+
+ /* Enable second PHY with the OTG port */
+ writel(0x1, phy_select);
+ }
+
+ dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+ motg->irq = platform_get_irq(pdev, 0);
+ if (motg->irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ ret = motg->irq;
+ return motg->irq;
+ }
+
+ motg->supplies[0].supply = "vddcx";
+ motg->supplies[1].supply = "v3p3";
+ motg->supplies[2].supply = "v1p8";
+
+ ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(motg->supplies),
+ motg->supplies);
+ if (ret)
+ return ret;
+
+ motg->vddcx = motg->supplies[0].consumer;
+ motg->v3p3 = motg->supplies[1].consumer;
+ motg->v1p8 = motg->supplies[2].consumer;
+
+ clk_set_rate(motg->clk, 60000000);
+
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ ret = msm_hsusb_init_vddcx(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
+ goto disable_clks;
+ }
+
+ ret = msm_hsusb_ldo_init(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
+ goto disable_vddcx;
+ }
+ ret = msm_hsusb_ldo_set_mode(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vreg enable failed\n");
+ goto disable_ldo;
+ }
+
+ writel(0, USB_USBINTR);
+ writel(0, USB_OTGSC);
+
+ INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+ INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
+ ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
+ "msm_otg", motg);
+ if (ret) {
+ dev_err(&pdev->dev, "request irq failed\n");
+ goto disable_ldo;
+ }
+
+ phy->init = msm_phy_init;
+ phy->notify_disconnect = msm_phy_notify_disconnect;
+ phy->type = USB_PHY_TYPE_USB2;
+ phy->vbus_nb.notifier_call = msm_otg_vbus_notifier;
+ phy->id_nb.notifier_call = msm_otg_id_notifier;
+
+ phy->io_ops = &msm_otg_io_ops;
+
+ phy->otg->usb_phy = &motg->phy;
+ phy->otg->set_host = msm_otg_set_host;
+ phy->otg->set_peripheral = msm_otg_set_peripheral;
+
+ msm_usb_reset(phy);
+
+ ret = usb_add_phy_dev(&motg->phy);
+ if (ret) {
+ dev_err(&pdev->dev, "usb_add_phy failed\n");
+ goto disable_ldo;
+ }
+
+ ret = extcon_get_state(phy->edev, EXTCON_USB);
+ if (ret)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+
+ ret = extcon_get_state(phy->id_edev, EXTCON_USB_HOST);
+ if (ret)
+ clear_bit(ID, &motg->inputs);
+ else
+ set_bit(ID, &motg->inputs);
+
+ platform_set_drvdata(pdev, motg);
+ device_init_wakeup(&pdev->dev, 1);
+
+ if (motg->pdata->mode == USB_DR_MODE_OTG &&
+ motg->pdata->otg_control == OTG_USER_CONTROL) {
+ ret = msm_otg_debugfs_init(motg);
+ if (ret)
+ dev_dbg(&pdev->dev, "Can not create mode change file\n");
+ }
+
+ if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ /* Switch D+/D- lines to Device connector */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ } else {
+ /* Switch D+/D- lines to Hub */
+ gpiod_set_value_cansleep(motg->switch_gpio, 1);
+ }
+
+ motg->reboot.notifier_call = msm_otg_reboot_notify;
+ register_reboot_notifier(&motg->reboot);
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+disable_ldo:
+ msm_hsusb_ldo_init(motg, 0);
+disable_vddcx:
+ msm_hsusb_init_vddcx(motg, 0);
+disable_clks:
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ return ret;
+}
+
+static int msm_otg_remove(struct platform_device *pdev)
+{
+ struct msm_otg *motg = platform_get_drvdata(pdev);
+ struct usb_phy *phy = &motg->phy;
+ int cnt = 0;
+
+ if (phy->otg->host || phy->otg->gadget)
+ return -EBUSY;
+
+ unregister_reboot_notifier(&motg->reboot);
+
+ /*
+ * Ensure that D+/D- lines are routed to uB connector, so
+ * we could load bootloader/kernel at next reboot
+ */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+
+ msm_otg_debugfs_cleanup();
+ cancel_delayed_work_sync(&motg->chg_work);
+ cancel_work_sync(&motg->sm_work);
+
+ pm_runtime_resume(&pdev->dev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ pm_runtime_disable(&pdev->dev);
+
+ usb_remove_phy(phy);
+ disable_irq(motg->irq);
+
+ /*
+ * Put PHY in low power mode.
+ */
+ ulpi_read(phy, 0x14);
+ ulpi_write(phy, 0x08, 0x09);
+
+ writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+ if (readl(USB_PORTSC) & PORTSC_PHCD)
+ break;
+ udelay(1);
+ cnt++;
+ }
+ if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
+ dev_err(phy->dev, "Unable to suspend PHY\n");
+
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+ msm_hsusb_ldo_init(motg, 0);
+
+ pm_runtime_set_suspended(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int msm_otg_runtime_idle(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+ struct usb_otg *otg = motg->phy.otg;
+
+ dev_dbg(dev, "OTG runtime idle\n");
+
+ /*
+ * It is observed some times that a spurious interrupt
+ * comes when PHY is put into LPM immediately after PHY reset.
+ * This 1 sec delay also prevents entering into LPM immediately
+ * after asynchronous interrupt.
+ */
+ if (otg->state != OTG_STATE_UNDEFINED)
+ pm_schedule_suspend(dev, 1000);
+
+ return -EAGAIN;
+}
+
+static int msm_otg_runtime_suspend(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG runtime suspend\n");
+ return msm_otg_suspend(motg);
+}
+
+static int msm_otg_runtime_resume(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG runtime resume\n");
+ return msm_otg_resume(motg);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int msm_otg_pm_suspend(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG PM suspend\n");
+ return msm_otg_suspend(motg);
+}
+
+static int msm_otg_pm_resume(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+ int ret;
+
+ dev_dbg(dev, "OTG PM resume\n");
+
+ ret = msm_otg_resume(motg);
+ if (ret)
+ return ret;
+
+ /*
+ * Runtime PM Documentation recommends bringing the
+ * device to full powered state upon resume.
+ */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops msm_otg_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
+ SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
+ msm_otg_runtime_idle)
+};
+
+static struct platform_driver msm_otg_driver = {
+ .probe = msm_otg_probe,
+ .remove = msm_otg_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = &msm_otg_dev_pm_ops,
+ .of_match_table = msm_otg_dt_match,
+ },
+};
+
+module_platform_driver(msm_otg_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");