[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/usb/phy/phy-mv-usb.h b/src/kernel/linux/v4.14/drivers/usb/phy/phy-mv-usb.h
new file mode 100644
index 0000000..551da6e
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/usb/phy/phy-mv-usb.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MV_USB_OTG_CONTROLLER__
+#define __MV_USB_OTG_CONTROLLER__
+
+#include <linux/types.h>
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP (0x00000001)
+#define USBCMD_CTRL_RESET (0x00000002)
+
+/* otgsc Register Bit Masks */
+#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
+#define OTGSC_CTRL_VUSB_CHARGE 0x00000002
+#define OTGSC_CTRL_OTG_TERM 0x00000008
+#define OTGSC_CTRL_DATA_PULSING 0x00000010
+#define OTGSC_STS_USB_ID 0x00000100
+#define OTGSC_STS_A_VBUS_VALID 0x00000200
+#define OTGSC_STS_A_SESSION_VALID 0x00000400
+#define OTGSC_STS_B_SESSION_VALID 0x00000800
+#define OTGSC_STS_B_SESSION_END 0x00001000
+#define OTGSC_STS_1MS_TOGGLE 0x00002000
+#define OTGSC_STS_DATA_PULSING 0x00004000
+#define OTGSC_INTSTS_USB_ID 0x00010000
+#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
+#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
+#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
+#define OTGSC_INTSTS_B_SESSION_END 0x00100000
+#define OTGSC_INTSTS_1MS 0x00200000
+#define OTGSC_INTSTS_DATA_PULSING 0x00400000
+#define OTGSC_INTR_USB_ID 0x01000000
+#define OTGSC_INTR_A_VBUS_VALID 0x02000000
+#define OTGSC_INTR_A_SESSION_VALID 0x04000000
+#define OTGSC_INTR_B_SESSION_VALID 0x08000000
+#define OTGSC_INTR_B_SESSION_END 0x10000000
+#define OTGSC_INTR_1MS_TIMER 0x20000000
+#define OTGSC_INTR_DATA_PULSING 0x40000000
+
+#define CAPLENGTH_MASK (0xff)
+
+/* Timer's interval, unit 10ms */
+#define T_A_WAIT_VRISE 100
+#define T_A_WAIT_BCON 2000
+#define T_A_AIDL_BDIS 100
+#define T_A_BIDL_ADIS 20
+#define T_B_ASE0_BRST 400
+#define T_B_SE0_SRP 300
+#define T_B_SRP_FAIL 2000
+#define T_B_DATA_PLS 10
+#define T_B_SRP_INIT 100
+#define T_A_SRP_RSPNS 10
+#define T_A_DRV_RSM 5
+
+enum otg_function {
+ OTG_B_DEVICE = 0,
+ OTG_A_DEVICE
+};
+
+enum mv_otg_timer {
+ A_WAIT_BCON_TIMER = 0,
+ OTG_TIMER_NUM
+};
+
+/* PXA OTG state machine */
+struct mv_otg_ctrl {
+ /* internal variables */
+ u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */
+ u8 b_srp_done;
+ u8 b_hnp_en;
+
+ /* OTG inputs */
+ u8 a_bus_drop;
+ u8 a_bus_req;
+ u8 a_clr_err;
+ u8 a_bus_resume;
+ u8 a_bus_suspend;
+ u8 a_conn;
+ u8 a_sess_vld;
+ u8 a_srp_det;
+ u8 a_vbus_vld;
+ u8 b_bus_req; /* B-Device Require Bus */
+ u8 b_bus_resume;
+ u8 b_bus_suspend;
+ u8 b_conn;
+ u8 b_se0_srp;
+ u8 b_sess_end;
+ u8 b_sess_vld;
+ u8 id;
+ u8 a_suspend_req;
+
+ /*Timer event */
+ u8 a_aidl_bdis_timeout;
+ u8 b_ase0_brst_timeout;
+ u8 a_bidl_adis_timeout;
+ u8 a_wait_bcon_timeout;
+
+ struct timer_list timer[OTG_TIMER_NUM];
+};
+
+#define VUSBHS_MAX_PORTS 8
+
+struct mv_otg_regs {
+ u32 usbcmd; /* Command register */
+ u32 usbsts; /* Status register */
+ u32 usbintr; /* Interrupt enable */
+ u32 frindex; /* Frame index */
+ u32 reserved1[1];
+ u32 deviceaddr; /* Device Address */
+ u32 eplistaddr; /* Endpoint List Address */
+ u32 ttctrl; /* HOST TT status and control */
+ u32 burstsize; /* Programmable Burst Size */
+ u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */
+ u32 reserved[4];
+ u32 epnak; /* Endpoint NAK */
+ u32 epnaken; /* Endpoint NAK Enable */
+ u32 configflag; /* Configured Flag register */
+ u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
+ u32 otgsc;
+ u32 usbmode; /* USB Host/Device mode */
+ u32 epsetupstat; /* Endpoint Setup Status */
+ u32 epprime; /* Endpoint Initialize */
+ u32 epflush; /* Endpoint De-initialize */
+ u32 epstatus; /* Endpoint Status */
+ u32 epcomplete; /* Endpoint Interrupt On Complete */
+ u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */
+ u32 mcr; /* Mux Control */
+ u32 isr; /* Interrupt Status */
+ u32 ier; /* Interrupt Enable */
+};
+
+struct mv_otg {
+ struct usb_phy phy;
+ struct mv_otg_ctrl otg_ctrl;
+
+ /* base address */
+ void __iomem *phy_regs;
+ void __iomem *cap_regs;
+ struct mv_otg_regs __iomem *op_regs;
+
+ struct platform_device *pdev;
+ int irq;
+ u32 irq_status;
+ u32 irq_en;
+
+ struct delayed_work work;
+ struct workqueue_struct *qwork;
+
+ spinlock_t wq_lock;
+
+ struct mv_usb_platform_data *pdata;
+
+ unsigned int active;
+ unsigned int clock_gating;
+ struct clk *clk;
+};
+
+#endif