[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/usb/serial/f81232.c b/src/kernel/linux/v4.14/drivers/usb/serial/f81232.c
new file mode 100644
index 0000000..1f20fa0
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/usb/serial/f81232.c
@@ -0,0 +1,733 @@
+/*
+ * Fintek F81232 USB to serial adaptor driver
+ *
+ * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
+ * Copyright (C) 2012 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x1934, 0x0706) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE 115200
+
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST 0xa0
+#define F81232_GET_REGISTER 0xc0
+#define F81232_SET_REGISTER 0x40
+
+#define SERIAL_BASE_ADDRESS 0x0120
+#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
+
+struct f81232_private {
+ struct mutex lock;
+ u8 modem_control;
+ u8 modem_status;
+ struct work_struct interrupt_work;
+ struct usb_serial_port *port;
+};
+
+static int calc_baud_divisor(speed_t baudrate)
+{
+ return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(*val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ status = usb_control_msg(dev,
+ usb_rcvctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_GET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(*val),
+ USB_CTRL_GET_TIMEOUT);
+ if (status != sizeof(*val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status < 0)
+ status = usb_translate_errors(status);
+ else
+ status = -EIO;
+ } else {
+ status = 0;
+ *val = *tmp;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ *tmp = val;
+
+ status = usb_control_msg(dev,
+ usb_sndctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_SET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(val),
+ USB_CTRL_SET_TIMEOUT);
+ if (status != sizeof(val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status < 0)
+ status = usb_translate_errors(status);
+ else
+ status = -EIO;
+ } else {
+ status = 0;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+ int status;
+ u8 current_msr;
+ struct tty_struct *tty;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->lock);
+ status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+ ¤t_msr);
+ if (status) {
+ dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ if (!(current_msr & UART_MSR_ANY_DELTA)) {
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ priv->modem_status = current_msr;
+
+ if (current_msr & UART_MSR_DCTS)
+ port->icount.cts++;
+ if (current_msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (current_msr & UART_MSR_TERI)
+ port->icount.rng++;
+ if (current_msr & UART_MSR_DDCD) {
+ port->icount.dcd++;
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ usb_serial_handle_dcd_change(port, tty,
+ current_msr & UART_MSR_DCD);
+
+ tty_kref_put(tty);
+ }
+ }
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+ mutex_unlock(&priv->lock);
+}
+
+static int f81232_set_mctrl(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ u8 val;
+ int status;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+ return 0; /* no change */
+
+ /* 'set' takes precedence over 'clear' */
+ clear &= ~set;
+
+ /* force enable interrupt with OUT2 */
+ mutex_lock(&priv->lock);
+ val = UART_MCR_OUT2 | priv->modem_control;
+
+ if (clear & TIOCM_DTR)
+ val &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ val &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ val |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ val |= UART_MCR_RTS;
+
+ dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+ val, priv->modem_control);
+
+ status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
+ if (status) {
+ dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+ mutex_unlock(&priv->lock);
+ return status;
+ }
+
+ priv->modem_control = val;
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+static void f81232_update_line_status(struct usb_serial_port *port,
+ unsigned char *data,
+ size_t actual_length)
+{
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (!actual_length)
+ return;
+
+ switch (data[0] & 0x07) {
+ case 0x00: /* msr change */
+ dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+ schedule_work(&priv->interrupt_work);
+ break;
+ case 0x02: /* tx-empty */
+ break;
+ case 0x04: /* rx data available */
+ break;
+ case 0x06: /* lsr change */
+ /* we can forget it. the LSR will read from bulk-in */
+ dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+ break;
+ }
+}
+
+static void f81232_read_int_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ unsigned int actual_length = urb->actual_length;
+ int status = urb->status;
+ int retval;
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+ __func__, status);
+ return;
+ default:
+ dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+ __func__, status);
+ goto exit;
+ }
+
+ usb_serial_debug_data(&port->dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ f81232_update_line_status(port, data, actual_length);
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+}
+
+static void f81232_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ char tty_flag;
+ unsigned int i;
+ u8 lsr;
+
+ /*
+ * When opening the port we get a 1-byte packet with the current LSR,
+ * which we discard.
+ */
+ if ((urb->actual_length < 2) || (urb->actual_length % 2))
+ return;
+
+ /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+ for (i = 0; i < urb->actual_length; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i];
+
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
+ }
+
+ tty_flip_buffer_push(&port->port);
+}
+
+static void f81232_break_ctl(struct tty_struct *tty, int break_state)
+{
+ /* FIXME - Stubbed out for now */
+
+ /*
+ * break_state = -1 to turn on break, and 0 to turn off break
+ * see drivers/char/tty_io.c to see it used.
+ * last_set_data_urb_value NEVER has the break bit set in it.
+ */
+}
+
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+ u8 lcr;
+ int divisor;
+ int status = 0;
+
+ divisor = calc_baud_divisor(baudrate);
+
+ status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+ &lcr); /* get LCR */
+ if (status) {
+ dev_err(&port->dev, "%s failed to get LCR: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr | UART_LCR_DLAB); /* Enable DLAB */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+ divisor & 0x00ff); /* low */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+ __func__, status);
+ goto reapply_lcr;
+ }
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ (divisor & 0xff00) >> 8); /* high */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+ __func__, status);
+ }
+
+reapply_lcr:
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr & ~UART_LCR_DLAB);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ }
+}
+
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+ u8 val;
+ int status;
+
+ /* fifo on, trigger8, clear TX/RX*/
+ val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT;
+
+ status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set FCR: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ /* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ UART_IER_MSI);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+ int status;
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static void f81232_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ u8 new_lcr = 0;
+ int status = 0;
+ speed_t baudrate;
+
+ /* Don't change anything if nothing has changed */
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+ return;
+
+ if (C_BAUD(tty) == B0)
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ baudrate = tty_get_baud_rate(tty);
+ if (baudrate > 0) {
+ if (baudrate > F81232_MAX_BAUDRATE) {
+ baudrate = F81232_MAX_BAUDRATE;
+ tty_encode_baud_rate(tty, baudrate, baudrate);
+ }
+ f81232_set_baudrate(port, baudrate);
+ }
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set LCR: %d\n",
+ __func__, status);
+ }
+}
+
+static int f81232_tiocmget(struct tty_struct *tty)
+{
+ int r;
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ u8 mcr, msr;
+
+ /* force get current MSR changed state */
+ f81232_read_msr(port);
+
+ mutex_lock(&port_priv->lock);
+ mcr = port_priv->modem_control;
+ msr = port_priv->modem_status;
+ mutex_unlock(&port_priv->lock);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
+}
+
+static int f81232_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ return f81232_set_mctrl(port, set, clear);
+}
+
+static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ int result;
+
+ result = f81232_port_enable(port);
+ if (result)
+ return result;
+
+ /* Setup termios */
+ if (tty)
+ f81232_set_termios(tty, port, NULL);
+
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (result) {
+ dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+ " error %d\n", __func__, result);
+ return result;
+ }
+
+ result = usb_serial_generic_open(tty, port);
+ if (result) {
+ usb_kill_urb(port->interrupt_in_urb);
+ return result;
+ }
+
+ return 0;
+}
+
+static void f81232_close(struct usb_serial_port *port)
+{
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+
+ f81232_port_disable(port);
+ usb_serial_generic_close(port);
+ usb_kill_urb(port->interrupt_in_urb);
+ flush_work(&port_priv->interrupt_work);
+}
+
+static void f81232_dtr_rts(struct usb_serial_port *port, int on)
+{
+ if (on)
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+ else
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static int f81232_carrier_raised(struct usb_serial_port *port)
+{
+ u8 msr;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->lock);
+ msr = priv->modem_status;
+ mutex_unlock(&priv->lock);
+
+ if (msr & UART_MSR_DCD)
+ return 1;
+ return 0;
+}
+
+static int f81232_get_serial_info(struct usb_serial_port *port,
+ unsigned long arg)
+{
+ struct serial_struct ser;
+
+ memset(&ser, 0, sizeof(ser));
+
+ ser.type = PORT_16550A;
+ ser.line = port->minor;
+ ser.port = port->port_number;
+ ser.baud_base = F81232_MAX_BAUDRATE;
+
+ if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int f81232_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return f81232_get_serial_info(port, arg);
+ default:
+ break;
+ }
+ return -ENOIOCTLCMD;
+}
+
+static void f81232_interrupt_work(struct work_struct *work)
+{
+ struct f81232_private *priv =
+ container_of(work, struct f81232_private, interrupt_work);
+
+ f81232_read_msr(priv->port);
+}
+
+static int f81232_port_probe(struct usb_serial_port *port)
+{
+ struct f81232_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->interrupt_work, f81232_interrupt_work);
+
+ usb_set_serial_port_data(port, priv);
+
+ port->port.drain_delay = 256;
+ priv->port = port;
+
+ return 0;
+}
+
+static int f81232_port_remove(struct usb_serial_port *port)
+{
+ struct f81232_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
+
+static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
+{
+ struct usb_serial_port *port = serial->port[0];
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+ usb_kill_urb(port->read_urbs[i]);
+
+ usb_kill_urb(port->interrupt_in_urb);
+
+ if (port_priv)
+ flush_work(&port_priv->interrupt_work);
+
+ return 0;
+}
+
+static int f81232_resume(struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+ int result;
+
+ if (tty_port_initialized(&port->port)) {
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ if (result) {
+ dev_err(&port->dev, "submit interrupt urb failed: %d\n",
+ result);
+ return result;
+ }
+ }
+
+ return usb_serial_generic_resume(serial);
+}
+
+static struct usb_serial_driver f81232_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "f81232",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .bulk_in_size = 256,
+ .bulk_out_size = 256,
+ .open = f81232_open,
+ .close = f81232_close,
+ .dtr_rts = f81232_dtr_rts,
+ .carrier_raised = f81232_carrier_raised,
+ .ioctl = f81232_ioctl,
+ .break_ctl = f81232_break_ctl,
+ .set_termios = f81232_set_termios,
+ .tiocmget = f81232_tiocmget,
+ .tiocmset = f81232_tiocmset,
+ .tiocmiwait = usb_serial_generic_tiocmiwait,
+ .process_read_urb = f81232_process_read_urb,
+ .read_int_callback = f81232_read_int_callback,
+ .port_probe = f81232_port_probe,
+ .port_remove = f81232_port_remove,
+ .suspend = f81232_suspend,
+ .resume = f81232_resume,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &f81232_device,
+ NULL,
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
+MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
+MODULE_LICENSE("GPL v2");