[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/usb/serial/kl5kusb105.h b/src/kernel/linux/v4.14/drivers/usb/serial/kl5kusb105.h
new file mode 100644
index 0000000..41c9bf6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/usb/serial/kl5kusb105.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions for the KLSI KL5KUSB105 serial port adapter
+ */
+
+/* vendor/product pairs that are known to contain this chipset */
+#define PALMCONNECT_VID 0x0830
+#define PALMCONNECT_PID 0x0080
+
+#define KLSI_VID 0x05e9
+#define KLSI_KL5KUSB105D_PID 0x00c0
+
+/* Vendor commands: */
+
+
+/* port table -- the chip supports up to 4 channels */
+
+/* baud rates */
+
+enum {
+ kl5kusb105a_sio_b115200 = 0,
+ kl5kusb105a_sio_b57600 = 1,
+ kl5kusb105a_sio_b38400 = 2,
+ kl5kusb105a_sio_b19200 = 4,
+ kl5kusb105a_sio_b14400 = 5,
+ kl5kusb105a_sio_b9600 = 6,
+ kl5kusb105a_sio_b4800 = 8, /* unchecked */
+ kl5kusb105a_sio_b2400 = 9, /* unchecked */
+ kl5kusb105a_sio_b1200 = 0xa, /* unchecked */
+ kl5kusb105a_sio_b600 = 0xb /* unchecked */
+};
+
+/* data bits */
+#define kl5kusb105a_dtb_7 7
+#define kl5kusb105a_dtb_8 8
+
+
+
+/* requests: */
+#define KL5KUSB105A_SIO_SET_DATA 1
+#define KL5KUSB105A_SIO_POLL 2
+#define KL5KUSB105A_SIO_CONFIGURE 3
+/* values used for request KL5KUSB105A_SIO_CONFIGURE */
+#define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3
+#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define KL5KUSB105A_DSR ((1<<4) | (1<<5))
+#define KL5KUSB105A_CTS ((1<<5) | (1<<4))
+
+#define KL5KUSB105A_WANTS_TO_SEND 0x30
+#if 0
+#define KL5KUSB105A_DTR /* Data Terminal Ready */
+#define KL5KUSB105A_CTS /* Clear To Send */
+#define KL5KUSB105A_CD /* Carrier Detect */
+#define KL5KUSB105A_DSR /* Data Set Ready */
+#define KL5KUSB105A_RxD /* Receive pin */
+
+#define KL5KUSB105A_LE
+#define KL5KUSB105A_RTS
+#define KL5KUSB105A_ST
+#define KL5KUSB105A_SR
+#define KL5KUSB105A_RI /* Ring Indicator */
+#endif