[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/drivers/video/backlight/ili9320.c b/src/kernel/linux/v4.14/drivers/video/backlight/ili9320.c
new file mode 100644
index 0000000..2cf39e6
--- /dev/null
+++ b/src/kernel/linux/v4.14/drivers/video/backlight/ili9320.c
@@ -0,0 +1,303 @@
+/* drivers/video/backlight/ili9320.c
+ *
+ * ILI9320 LCD controller driver core.
+ *
+ * Copyright 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/spi/spi.h>
+
+#include <video/ili9320.h>
+
+#include "ili9320.h"
+
+
+static inline int ili9320_write_spi(struct ili9320 *ili,
+ unsigned int reg,
+ unsigned int value)
+{
+ struct ili9320_spi *spi = &ili->access.spi;
+ unsigned char *addr = spi->buffer_addr;
+ unsigned char *data = spi->buffer_data;
+
+ /* spi message consits of:
+ * first byte: ID and operation
+ */
+
+ addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE;
+ addr[1] = reg >> 8;
+ addr[2] = reg;
+
+ /* second message is the data to transfer */
+
+ data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE;
+ data[1] = value >> 8;
+ data[2] = value;
+
+ return spi_sync(spi->dev, &spi->message);
+}
+
+int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value)
+{
+ dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value);
+ return ili->write(ili, reg, value);
+}
+EXPORT_SYMBOL_GPL(ili9320_write);
+
+int ili9320_write_regs(struct ili9320 *ili,
+ const struct ili9320_reg *values,
+ int nr_values)
+{
+ int index;
+ int ret;
+
+ for (index = 0; index < nr_values; index++, values++) {
+ ret = ili9320_write(ili, values->address, values->value);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ili9320_write_regs);
+
+static void ili9320_reset(struct ili9320 *lcd)
+{
+ struct ili9320_platdata *cfg = lcd->platdata;
+
+ cfg->reset(1);
+ mdelay(50);
+
+ cfg->reset(0);
+ mdelay(50);
+
+ cfg->reset(1);
+ mdelay(100);
+}
+
+static inline int ili9320_init_chip(struct ili9320 *lcd)
+{
+ int ret;
+
+ ili9320_reset(lcd);
+
+ ret = lcd->client->init(lcd, lcd->platdata);
+ if (ret != 0) {
+ dev_err(lcd->dev, "failed to initialise display\n");
+ return ret;
+ }
+
+ lcd->initialised = 1;
+ return 0;
+}
+
+static inline int ili9320_power_on(struct ili9320 *lcd)
+{
+ if (!lcd->initialised)
+ ili9320_init_chip(lcd);
+
+ lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+ ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+ return 0;
+}
+
+static inline int ili9320_power_off(struct ili9320 *lcd)
+{
+ lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+ ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+ return 0;
+}
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+static int ili9320_power(struct ili9320 *lcd, int power)
+{
+ int ret = 0;
+
+ dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power);
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ ret = ili9320_power_on(lcd);
+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ ret = ili9320_power_off(lcd);
+
+ if (ret == 0)
+ lcd->power = power;
+ else
+ dev_warn(lcd->dev, "failed to set power mode %d\n", power);
+
+ return ret;
+}
+
+static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd)
+{
+ return lcd_get_data(lcd);
+}
+
+static int ili9320_set_power(struct lcd_device *ld, int power)
+{
+ struct ili9320 *lcd = to_our_lcd(ld);
+
+ return ili9320_power(lcd, power);
+}
+
+static int ili9320_get_power(struct lcd_device *ld)
+{
+ struct ili9320 *lcd = to_our_lcd(ld);
+
+ return lcd->power;
+}
+
+static struct lcd_ops ili9320_ops = {
+ .get_power = ili9320_get_power,
+ .set_power = ili9320_set_power,
+};
+
+static void ili9320_setup_spi(struct ili9320 *ili,
+ struct spi_device *dev)
+{
+ struct ili9320_spi *spi = &ili->access.spi;
+
+ ili->write = ili9320_write_spi;
+ spi->dev = dev;
+
+ /* fill the two messages we are going to use to send the data
+ * with, the first the address followed by the data. The datasheet
+ * says they should be done as two distinct cycles of the SPI CS line.
+ */
+
+ spi->xfer[0].tx_buf = spi->buffer_addr;
+ spi->xfer[1].tx_buf = spi->buffer_data;
+ spi->xfer[0].len = 3;
+ spi->xfer[1].len = 3;
+ spi->xfer[0].bits_per_word = 8;
+ spi->xfer[1].bits_per_word = 8;
+ spi->xfer[0].cs_change = 1;
+
+ spi_message_init(&spi->message);
+ spi_message_add_tail(&spi->xfer[0], &spi->message);
+ spi_message_add_tail(&spi->xfer[1], &spi->message);
+}
+
+int ili9320_probe_spi(struct spi_device *spi,
+ struct ili9320_client *client)
+{
+ struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev);
+ struct device *dev = &spi->dev;
+ struct ili9320 *ili;
+ struct lcd_device *lcd;
+ int ret = 0;
+
+ /* verify we where given some information */
+
+ if (cfg == NULL) {
+ dev_err(dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) {
+ dev_err(dev, "invalid platform data supplied\n");
+ return -EINVAL;
+ }
+
+ /* allocate and initialse our state */
+
+ ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL);
+ if (ili == NULL)
+ return -ENOMEM;
+
+ ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
+
+ ili->dev = dev;
+ ili->client = client;
+ ili->power = FB_BLANK_POWERDOWN;
+ ili->platdata = cfg;
+
+ spi_set_drvdata(spi, ili);
+
+ ili9320_setup_spi(ili, spi);
+
+ lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili,
+ &ili9320_ops);
+ if (IS_ERR(lcd)) {
+ dev_err(dev, "failed to register lcd device\n");
+ return PTR_ERR(lcd);
+ }
+
+ ili->lcd = lcd;
+
+ dev_info(dev, "initialising %s\n", client->name);
+
+ ret = ili9320_power(ili, FB_BLANK_UNBLANK);
+ if (ret != 0) {
+ dev_err(dev, "failed to set lcd power state\n");
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ili9320_probe_spi);
+
+int ili9320_remove(struct ili9320 *ili)
+{
+ ili9320_power(ili, FB_BLANK_POWERDOWN);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ili9320_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int ili9320_suspend(struct ili9320 *lcd)
+{
+ int ret;
+
+ ret = ili9320_power(lcd, FB_BLANK_POWERDOWN);
+
+ if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
+ ili9320_write(lcd, ILI9320_POWER1, lcd->power1 |
+ ILI9320_POWER1_SLP |
+ ILI9320_POWER1_DSTB);
+ lcd->initialised = 0;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ili9320_suspend);
+
+int ili9320_resume(struct ili9320 *lcd)
+{
+ dev_info(lcd->dev, "resuming from power state %d\n", lcd->power);
+
+ if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP)
+ ili9320_write(lcd, ILI9320_POWER1, 0x00);
+
+ return ili9320_power(lcd, FB_BLANK_UNBLANK);
+}
+EXPORT_SYMBOL_GPL(ili9320_resume);
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+void ili9320_shutdown(struct ili9320 *lcd)
+{
+ ili9320_power(lcd, FB_BLANK_POWERDOWN);
+}
+EXPORT_SYMBOL_GPL(ili9320_shutdown);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_DESCRIPTION("ILI9320 LCD Driver");
+MODULE_LICENSE("GPL v2");