[Feature]add MT2731_MP2_MR2_SVN388 baseline version

Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/sound/firewire/tascam/tascam-transaction.c b/src/kernel/linux/v4.14/sound/firewire/tascam/tascam-transaction.c
new file mode 100644
index 0000000..8967c52
--- /dev/null
+++ b/src/kernel/linux/v4.14/sound/firewire/tascam/tascam-transaction.c
@@ -0,0 +1,400 @@
+/*
+ * tascam-transaction.c - a part of driver for TASCAM FireWire series
+ *
+ * Copyright (c) 2015 Takashi Sakamoto
+ *
+ * Licensed under the terms of the GNU General Public License, version 2.
+ */
+
+#include "tascam.h"
+
+/*
+ * When return minus value, given argument is not MIDI status.
+ * When return 0, given argument is a beginning of system exclusive.
+ * When return the others, given argument is MIDI data.
+ */
+static inline int calculate_message_bytes(u8 status)
+{
+	switch (status) {
+	case 0xf6:	/* Tune request. */
+	case 0xf8:	/* Timing clock. */
+	case 0xfa:	/* Start. */
+	case 0xfb:	/* Continue. */
+	case 0xfc:	/* Stop. */
+	case 0xfe:	/* Active sensing. */
+	case 0xff:	/* System reset. */
+		return 1;
+	case 0xf1:	/* MIDI time code quarter frame. */
+	case 0xf3:	/* Song select. */
+		return 2;
+	case 0xf2:	/* Song position pointer. */
+		return 3;
+	case 0xf0:	/* Exclusive. */
+		return 0;
+	case 0xf7:	/* End of exclusive. */
+		break;
+	case 0xf4:	/* Undefined. */
+	case 0xf5:	/* Undefined. */
+	case 0xf9:	/* Undefined. */
+	case 0xfd:	/* Undefined. */
+		break;
+	default:
+		switch (status & 0xf0) {
+		case 0x80:	/* Note on. */
+		case 0x90:	/* Note off. */
+		case 0xa0:	/* Polyphonic key pressure. */
+		case 0xb0:	/* Control change and Mode change. */
+		case 0xe0:	/* Pitch bend change. */
+			return 3;
+		case 0xc0:	/* Program change. */
+		case 0xd0:	/* Channel pressure. */
+			return 2;
+		default:
+		break;
+		}
+	break;
+	}
+
+	return -EINVAL;
+}
+
+static int fill_message(struct snd_fw_async_midi_port *port,
+			struct snd_rawmidi_substream *substream)
+{
+	int i, len, consume;
+	u8 *label, *msg;
+	u8 status;
+
+	/* The first byte is used for label, the rest for MIDI bytes. */
+	label = port->buf;
+	msg = port->buf + 1;
+
+	consume = snd_rawmidi_transmit_peek(substream, msg, 3);
+	if (consume == 0)
+		return 0;
+
+	/* On exclusive message. */
+	if (port->on_sysex) {
+		/* Seek the end of exclusives. */
+		for (i = 0; i < consume; ++i) {
+			if (msg[i] == 0xf7) {
+				port->on_sysex = false;
+				break;
+			}
+		}
+
+		/* At the end of exclusive message, use label 0x07. */
+		if (!port->on_sysex) {
+			consume = i + 1;
+			*label = (substream->number << 4) | 0x07;
+		/* During exclusive message, use label 0x04. */
+		} else if (consume == 3) {
+			*label = (substream->number << 4) | 0x04;
+		/* We need to fill whole 3 bytes. Go to next change. */
+		} else {
+			return 0;
+		}
+
+		len = consume;
+	} else {
+		/* The beginning of exclusives. */
+		if (msg[0] == 0xf0) {
+			/* Transfer it in next chance in another condition. */
+			port->on_sysex = true;
+			return 0;
+		} else {
+			/* On running-status. */
+			if ((msg[0] & 0x80) != 0x80)
+				status = port->running_status;
+			else
+				status = msg[0];
+
+			/* Calculate consume bytes. */
+			len = calculate_message_bytes(status);
+			if (len <= 0)
+				return 0;
+
+			/* On running-status. */
+			if ((msg[0] & 0x80) != 0x80) {
+				/* Enough MIDI bytes were not retrieved. */
+				if (consume < len - 1)
+					return 0;
+				consume = len - 1;
+
+				msg[2] = msg[1];
+				msg[1] = msg[0];
+				msg[0] = port->running_status;
+			} else {
+				/* Enough MIDI bytes were not retrieved. */
+				if (consume < len)
+					return 0;
+				consume = len;
+
+				port->running_status = msg[0];
+			}
+		}
+
+		*label = (substream->number << 4) | (msg[0] >> 4);
+	}
+
+	if (len > 0 && len < 3)
+		memset(msg + len, 0, 3 - len);
+
+	return consume;
+}
+
+static void async_midi_port_callback(struct fw_card *card, int rcode,
+				     void *data, size_t length,
+				     void *callback_data)
+{
+	struct snd_fw_async_midi_port *port = callback_data;
+	struct snd_rawmidi_substream *substream = ACCESS_ONCE(port->substream);
+
+	/* This port is closed. */
+	if (substream == NULL)
+		return;
+
+	if (rcode == RCODE_COMPLETE)
+		snd_rawmidi_transmit_ack(substream, port->consume_bytes);
+	else if (!rcode_is_permanent_error(rcode))
+		/* To start next transaction immediately for recovery. */
+		port->next_ktime = 0;
+	else
+		/* Don't continue processing. */
+		port->error = true;
+
+	port->idling = true;
+
+	if (!snd_rawmidi_transmit_empty(substream))
+		schedule_work(&port->work);
+}
+
+static void midi_port_work(struct work_struct *work)
+{
+	struct snd_fw_async_midi_port *port =
+			container_of(work, struct snd_fw_async_midi_port, work);
+	struct snd_rawmidi_substream *substream = ACCESS_ONCE(port->substream);
+	int generation;
+
+	/* Under transacting or error state. */
+	if (!port->idling || port->error)
+		return;
+
+	/* Nothing to do. */
+	if (substream == NULL || snd_rawmidi_transmit_empty(substream))
+		return;
+
+	/* Do it in next chance. */
+	if (ktime_after(port->next_ktime, ktime_get())) {
+		schedule_work(&port->work);
+		return;
+	}
+
+	/*
+	 * Fill the buffer. The callee must use snd_rawmidi_transmit_peek().
+	 * Later, snd_rawmidi_transmit_ack() is called.
+	 */
+	memset(port->buf, 0, 4);
+	port->consume_bytes = fill_message(port, substream);
+	if (port->consume_bytes <= 0) {
+		/* Do it in next chance, immediately. */
+		if (port->consume_bytes == 0) {
+			port->next_ktime = 0;
+			schedule_work(&port->work);
+		} else {
+			/* Fatal error. */
+			port->error = true;
+		}
+		return;
+	}
+
+	/* Set interval to next transaction. */
+	port->next_ktime = ktime_add_ns(ktime_get(),
+				port->consume_bytes * 8 * NSEC_PER_SEC / 31250);
+
+	/* Start this transaction. */
+	port->idling = false;
+
+	/*
+	 * In Linux FireWire core, when generation is updated with memory
+	 * barrier, node id has already been updated. In this module, After
+	 * this smp_rmb(), load/store instructions to memory are completed.
+	 * Thus, both of generation and node id are available with recent
+	 * values. This is a light-serialization solution to handle bus reset
+	 * events on IEEE 1394 bus.
+	 */
+	generation = port->parent->generation;
+	smp_rmb();
+
+	fw_send_request(port->parent->card, &port->transaction,
+			TCODE_WRITE_QUADLET_REQUEST,
+			port->parent->node_id, generation,
+			port->parent->max_speed,
+			TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_RX_QUAD,
+			port->buf, 4, async_midi_port_callback,
+			port);
+}
+
+void snd_fw_async_midi_port_init(struct snd_fw_async_midi_port *port)
+{
+	port->idling = true;
+	port->error = false;
+	port->running_status = 0;
+	port->on_sysex = false;
+}
+
+static void handle_midi_tx(struct fw_card *card, struct fw_request *request,
+			   int tcode, int destination, int source,
+			   int generation, unsigned long long offset,
+			   void *data, size_t length, void *callback_data)
+{
+	struct snd_tscm *tscm = callback_data;
+	u32 *buf = (u32 *)data;
+	unsigned int messages;
+	unsigned int i;
+	unsigned int port;
+	struct snd_rawmidi_substream *substream;
+	u8 *b;
+	int bytes;
+
+	if (offset != tscm->async_handler.offset)
+		goto end;
+
+	messages = length / 8;
+	for (i = 0; i < messages; i++) {
+		b = (u8 *)(buf + i * 2);
+
+		port = b[0] >> 4;
+		/* TODO: support virtual MIDI ports. */
+		if (port >= tscm->spec->midi_capture_ports)
+			goto end;
+
+		/* Assume the message length. */
+		bytes = calculate_message_bytes(b[1]);
+		/* On MIDI data or exclusives. */
+		if (bytes <= 0) {
+			/* Seek the end of exclusives. */
+			for (bytes = 1; bytes < 4; bytes++) {
+				if (b[bytes] == 0xf7)
+					break;
+			}
+			if (bytes == 4)
+				bytes = 3;
+		}
+
+		substream = ACCESS_ONCE(tscm->tx_midi_substreams[port]);
+		if (substream != NULL)
+			snd_rawmidi_receive(substream, b + 1, bytes);
+	}
+end:
+	fw_send_response(card, request, RCODE_COMPLETE);
+}
+
+int snd_tscm_transaction_register(struct snd_tscm *tscm)
+{
+	static const struct fw_address_region resp_register_region = {
+		.start	= 0xffffe0000000ull,
+		.end	= 0xffffe000ffffull,
+	};
+	unsigned int i;
+	int err;
+
+	/*
+	 * Usually, two quadlets are transferred by one transaction. The first
+	 * quadlet has MIDI messages, the rest includes timestamp.
+	 * Sometimes, 8 set of the data is transferred by a block transaction.
+	 */
+	tscm->async_handler.length = 8 * 8;
+	tscm->async_handler.address_callback = handle_midi_tx;
+	tscm->async_handler.callback_data = tscm;
+
+	err = fw_core_add_address_handler(&tscm->async_handler,
+					  &resp_register_region);
+	if (err < 0)
+		return err;
+
+	err = snd_tscm_transaction_reregister(tscm);
+	if (err < 0)
+		goto error;
+
+	for (i = 0; i < TSCM_MIDI_OUT_PORT_MAX; i++) {
+		tscm->out_ports[i].parent = fw_parent_device(tscm->unit);
+		tscm->out_ports[i].next_ktime = 0;
+		INIT_WORK(&tscm->out_ports[i].work, midi_port_work);
+	}
+
+	return err;
+error:
+	fw_core_remove_address_handler(&tscm->async_handler);
+	tscm->async_handler.callback_data = NULL;
+	return err;
+}
+
+/* At bus reset, these registers are cleared. */
+int snd_tscm_transaction_reregister(struct snd_tscm *tscm)
+{
+	struct fw_device *device = fw_parent_device(tscm->unit);
+	__be32 reg;
+	int err;
+
+	/* Register messaging address. Block transaction is not allowed. */
+	reg = cpu_to_be32((device->card->node_id << 16) |
+			  (tscm->async_handler.offset >> 32));
+	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+				 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
+				 &reg, sizeof(reg), 0);
+	if (err < 0)
+		return err;
+
+	reg = cpu_to_be32(tscm->async_handler.offset);
+	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+				 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
+				 &reg, sizeof(reg), 0);
+	if (err < 0)
+		return err;
+
+	/* Turn on messaging. */
+	reg = cpu_to_be32(0x00000001);
+	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+				  TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
+				  &reg, sizeof(reg), 0);
+	if (err < 0)
+		return err;
+
+	/* Turn on FireWire LED. */
+	reg = cpu_to_be32(0x0001008e);
+	return snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+				  TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
+				  &reg, sizeof(reg), 0);
+}
+
+void snd_tscm_transaction_unregister(struct snd_tscm *tscm)
+{
+	__be32 reg;
+
+	if (tscm->async_handler.callback_data == NULL)
+		return;
+
+	/* Turn off FireWire LED. */
+	reg = cpu_to_be32(0x0000008e);
+	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+			   TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
+			   &reg, sizeof(reg), 0);
+
+	/* Turn off messaging. */
+	reg = cpu_to_be32(0x00000000);
+	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
+			   &reg, sizeof(reg), 0);
+
+	/* Unregister the address. */
+	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
+			   &reg, sizeof(reg), 0);
+	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
+			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
+			   &reg, sizeof(reg), 0);
+
+	fw_core_remove_address_handler(&tscm->async_handler);
+	tscm->async_handler.callback_data = NULL;
+}