[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/sound/pci/ice1712/juli.c b/src/kernel/linux/v4.14/sound/pci/ice1712/juli.c
new file mode 100644
index 0000000..0dbaccf
--- /dev/null
+++ b/src/kernel/linux/v4.14/sound/pci/ice1712/juli.c
@@ -0,0 +1,699 @@
+/*
+ * ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ * Lowlevel functions for ESI Juli@ cards
+ *
+ * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ * 2008 Pavel Hofman <dustin@seznam.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "juli.h"
+
+struct juli_spec {
+ struct ak4114 *ak4114;
+ unsigned int analog:1;
+};
+
+/*
+ * chip addresses on I2C bus
+ */
+#define AK4114_ADDR 0x20 /* S/PDIF receiver */
+#define AK4358_ADDR 0x22 /* DAC */
+
+/*
+ * Juli does not use the standard ICE1724 clock scheme. Juli's ice1724 chip is
+ * supplied by external clock provided by Xilinx array and MK73-1 PLL frequency
+ * multiplier. Actual frequency is set by ice1724 GPIOs hooked to the Xilinx.
+ *
+ * The clock circuitry is supplied by the two ice1724 crystals. This
+ * arrangement allows to generate independent clock signal for AK4114's input
+ * rate detection circuit. As a result, Juli, unlike most other
+ * ice1724+ak4114-based cards, detects spdif input rate correctly.
+ * This fact is applied in the driver, allowing to modify PCM stream rate
+ * parameter according to the actual input rate.
+ *
+ * Juli uses the remaining three stereo-channels of its DAC to optionally
+ * monitor analog input, digital input, and digital output. The corresponding
+ * I2S signals are routed by Xilinx, controlled by GPIOs.
+ *
+ * The master mute is implemented using output muting transistors (GPIO) in
+ * combination with smuting the DAC.
+ *
+ * The card itself has no HW master volume control, implemented using the
+ * vmaster control.
+ *
+ * TODO:
+ * researching and fixing the input monitors
+ */
+
+/*
+ * GPIO pins
+ */
+#define GPIO_FREQ_MASK (3<<0)
+#define GPIO_FREQ_32KHZ (0<<0)
+#define GPIO_FREQ_44KHZ (1<<0)
+#define GPIO_FREQ_48KHZ (2<<0)
+#define GPIO_MULTI_MASK (3<<2)
+#define GPIO_MULTI_4X (0<<2)
+#define GPIO_MULTI_2X (1<<2)
+#define GPIO_MULTI_1X (2<<2) /* also external */
+#define GPIO_MULTI_HALF (3<<2)
+#define GPIO_INTERNAL_CLOCK (1<<4) /* 0 = external, 1 = internal */
+#define GPIO_CLOCK_MASK (1<<4)
+#define GPIO_ANALOG_PRESENT (1<<5) /* RO only: 0 = present */
+#define GPIO_RXMCLK_SEL (1<<7) /* must be 0 */
+#define GPIO_AK5385A_CKS0 (1<<8)
+#define GPIO_AK5385A_DFS1 (1<<9)
+#define GPIO_AK5385A_DFS0 (1<<10)
+#define GPIO_DIGOUT_MONITOR (1<<11) /* 1 = active */
+#define GPIO_DIGIN_MONITOR (1<<12) /* 1 = active */
+#define GPIO_ANAIN_MONITOR (1<<13) /* 1 = active */
+#define GPIO_AK5385A_CKS1 (1<<14) /* must be 0 */
+#define GPIO_MUTE_CONTROL (1<<15) /* output mute, 1 = muted */
+
+#define GPIO_RATE_MASK (GPIO_FREQ_MASK | GPIO_MULTI_MASK | \
+ GPIO_CLOCK_MASK)
+#define GPIO_AK5385A_MASK (GPIO_AK5385A_CKS0 | GPIO_AK5385A_DFS0 | \
+ GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS1)
+
+#define JULI_PCM_RATE (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
+#define GPIO_RATE_16000 (GPIO_FREQ_32KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_22050 (GPIO_FREQ_44KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_24000 (GPIO_FREQ_48KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_32000 (GPIO_FREQ_32KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_44100 (GPIO_FREQ_44KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_48000 (GPIO_FREQ_48KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_64000 (GPIO_FREQ_32KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_88200 (GPIO_FREQ_44KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_96000 (GPIO_FREQ_48KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_176400 (GPIO_FREQ_44KHZ | GPIO_MULTI_4X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_192000 (GPIO_FREQ_48KHZ | GPIO_MULTI_4X | \
+ GPIO_INTERNAL_CLOCK)
+
+/*
+ * Initial setup of the conversion array GPIO <-> rate
+ */
+static const unsigned int juli_rates[] = {
+ 16000, 22050, 24000, 32000,
+ 44100, 48000, 64000, 88200,
+ 96000, 176400, 192000,
+};
+
+static const unsigned int gpio_vals[] = {
+ GPIO_RATE_16000, GPIO_RATE_22050, GPIO_RATE_24000, GPIO_RATE_32000,
+ GPIO_RATE_44100, GPIO_RATE_48000, GPIO_RATE_64000, GPIO_RATE_88200,
+ GPIO_RATE_96000, GPIO_RATE_176400, GPIO_RATE_192000,
+};
+
+static const struct snd_pcm_hw_constraint_list juli_rates_info = {
+ .count = ARRAY_SIZE(juli_rates),
+ .list = juli_rates,
+ .mask = 0,
+};
+
+static int get_gpio_val(int rate)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(juli_rates); i++)
+ if (juli_rates[i] == rate)
+ return gpio_vals[i];
+ return 0;
+}
+
+static void juli_ak4114_write(void *private_data, unsigned char reg,
+ unsigned char val)
+{
+ snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4114_ADDR,
+ reg, val);
+}
+
+static unsigned char juli_ak4114_read(void *private_data, unsigned char reg)
+{
+ return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
+ AK4114_ADDR, reg);
+}
+
+/*
+ * If SPDIF capture and slaved to SPDIF-IN, setting runtime rate
+ * to the external rate
+ */
+static void juli_spdif_in_open(struct snd_ice1712 *ice,
+ struct snd_pcm_substream *substream)
+{
+ struct juli_spec *spec = ice->spec;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int rate;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
+ !ice->is_spdif_master(ice))
+ return;
+ rate = snd_ak4114_external_rate(spec->ak4114);
+ if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
+ runtime->hw.rate_min = rate;
+ runtime->hw.rate_max = rate;
+ }
+}
+
+/*
+ * AK4358 section
+ */
+
+static void juli_akm_lock(struct snd_akm4xxx *ak, int chip)
+{
+}
+
+static void juli_akm_unlock(struct snd_akm4xxx *ak, int chip)
+{
+}
+
+static void juli_akm_write(struct snd_akm4xxx *ak, int chip,
+ unsigned char addr, unsigned char data)
+{
+ struct snd_ice1712 *ice = ak->private_data[0];
+
+ if (snd_BUG_ON(chip))
+ return;
+ snd_vt1724_write_i2c(ice, AK4358_ADDR, addr, data);
+}
+
+/*
+ * change the rate of envy24HT, AK4358, AK5385
+ */
+static void juli_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
+{
+ unsigned char old, tmp, ak4358_dfs;
+ unsigned int ak5385_pins, old_gpio, new_gpio;
+ struct snd_ice1712 *ice = ak->private_data[0];
+ struct juli_spec *spec = ice->spec;
+
+ if (rate == 0) /* no hint - S/PDIF input is master or the new spdif
+ input rate undetected, simply return */
+ return;
+
+ /* adjust DFS on codecs */
+ if (rate > 96000) {
+ ak4358_dfs = 2;
+ ak5385_pins = GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS0;
+ } else if (rate > 48000) {
+ ak4358_dfs = 1;
+ ak5385_pins = GPIO_AK5385A_DFS0;
+ } else {
+ ak4358_dfs = 0;
+ ak5385_pins = 0;
+ }
+ /* AK5385 first, since it requires cold reset affecting both codecs */
+ old_gpio = ice->gpio.get_data(ice);
+ new_gpio = (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins;
+ /* dev_dbg(ice->card->dev, "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
+ new_gpio); */
+ ice->gpio.set_data(ice, new_gpio);
+
+ /* cold reset */
+ old = inb(ICEMT1724(ice, AC97_CMD));
+ outb(old | VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
+ udelay(1);
+ outb(old & ~VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
+
+ /* AK4358 */
+ /* set new value, reset DFS */
+ tmp = snd_akm4xxx_get(ak, 0, 2);
+ snd_akm4xxx_reset(ak, 1);
+ tmp = snd_akm4xxx_get(ak, 0, 2);
+ tmp &= ~(0x03 << 4);
+ tmp |= ak4358_dfs << 4;
+ snd_akm4xxx_set(ak, 0, 2, tmp);
+ snd_akm4xxx_reset(ak, 0);
+
+ /* reinit ak4114 */
+ snd_ak4114_reinit(spec->ak4114);
+}
+
+#define AK_DAC(xname, xch) { .name = xname, .num_channels = xch }
+#define PCM_VOLUME "PCM Playback Volume"
+#define MONITOR_AN_IN_VOLUME "Monitor Analog In Volume"
+#define MONITOR_DIG_IN_VOLUME "Monitor Digital In Volume"
+#define MONITOR_DIG_OUT_VOLUME "Monitor Digital Out Volume"
+
+static const struct snd_akm4xxx_dac_channel juli_dac[] = {
+ AK_DAC(PCM_VOLUME, 2),
+ AK_DAC(MONITOR_AN_IN_VOLUME, 2),
+ AK_DAC(MONITOR_DIG_OUT_VOLUME, 2),
+ AK_DAC(MONITOR_DIG_IN_VOLUME, 2),
+};
+
+
+static const struct snd_akm4xxx akm_juli_dac = {
+ .type = SND_AK4358,
+ .num_dacs = 8, /* DAC1 - analog out
+ DAC2 - analog in monitor
+ DAC3 - digital out monitor
+ DAC4 - digital in monitor
+ */
+ .ops = {
+ .lock = juli_akm_lock,
+ .unlock = juli_akm_unlock,
+ .write = juli_akm_write,
+ .set_rate_val = juli_akm_set_rate_val
+ },
+ .dac_info = juli_dac,
+};
+
+#define juli_mute_info snd_ctl_boolean_mono_info
+
+static int juli_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+ val = ice->gpio.get_data(ice) & (unsigned int) kcontrol->private_value;
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL)
+ /* val 0 = signal on */
+ ucontrol->value.integer.value[0] = (val) ? 0 : 1;
+ else
+ /* val 1 = signal on */
+ ucontrol->value.integer.value[0] = (val) ? 1 : 0;
+ return 0;
+}
+
+static int juli_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old_gpio, new_gpio;
+ old_gpio = ice->gpio.get_data(ice);
+ if (ucontrol->value.integer.value[0]) {
+ /* unmute */
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
+ /* 0 = signal on */
+ new_gpio = old_gpio & ~GPIO_MUTE_CONTROL;
+ /* un-smuting DAC */
+ snd_akm4xxx_write(ice->akm, 0, 0x01, 0x01);
+ } else
+ /* 1 = signal on */
+ new_gpio = old_gpio |
+ (unsigned int) kcontrol->private_value;
+ } else {
+ /* mute */
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
+ /* 1 = signal off */
+ new_gpio = old_gpio | GPIO_MUTE_CONTROL;
+ /* smuting DAC */
+ snd_akm4xxx_write(ice->akm, 0, 0x01, 0x03);
+ } else
+ /* 0 = signal off */
+ new_gpio = old_gpio &
+ ~((unsigned int) kcontrol->private_value);
+ }
+ /* dev_dbg(ice->card->dev,
+ "JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, "
+ "new_gpio 0x%x\n",
+ (unsigned int)ucontrol->value.integer.value[0], old_gpio,
+ new_gpio); */
+ if (old_gpio != new_gpio) {
+ ice->gpio.set_data(ice, new_gpio);
+ return 1;
+ }
+ /* no change */
+ return 0;
+}
+
+static struct snd_kcontrol_new juli_mute_controls[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_MUTE_CONTROL,
+ },
+ /* Although the following functionality respects the succint NDA'd
+ * documentation from the card manufacturer, and the same way of
+ * operation is coded in OSS Juli driver, only Digital Out monitor
+ * seems to work. Surprisingly, Analog input monitor outputs Digital
+ * output data. The two are independent, as enabling both doubles
+ * volume of the monitor sound.
+ *
+ * Checking traces on the board suggests the functionality described
+ * by the manufacturer is correct - I2S from ADC and AK4114
+ * go to ICE as well as to Xilinx, I2S inputs of DAC2,3,4 (the monitor
+ * inputs) are fed from Xilinx.
+ *
+ * I even checked traces on board and coded a support in driver for
+ * an alternative possibility - the unused I2S ICE output channels
+ * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
+ * the DAC - to no avail. The I2S outputs seem to be unconnected.
+ *
+ * The windows driver supports the monitoring correctly.
+ */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Analog In Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_ANAIN_MONITOR,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Digital Out Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_DIGOUT_MONITOR,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Digital In Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_DIGIN_MONITOR,
+ },
+};
+
+static char *slave_vols[] = {
+ PCM_VOLUME,
+ MONITOR_AN_IN_VOLUME,
+ MONITOR_DIG_IN_VOLUME,
+ MONITOR_DIG_OUT_VOLUME,
+ NULL
+};
+
+static
+DECLARE_TLV_DB_SCALE(juli_master_db_scale, -6350, 50, 1);
+
+static struct snd_kcontrol *ctl_find(struct snd_card *card,
+ const char *name)
+{
+ struct snd_ctl_elem_id sid;
+ memset(&sid, 0, sizeof(sid));
+ /* FIXME: strcpy is bad. */
+ strcpy(sid.name, name);
+ sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ return snd_ctl_find_id(card, &sid);
+}
+
+static void add_slaves(struct snd_card *card,
+ struct snd_kcontrol *master,
+ char * const *list)
+{
+ for (; *list; list++) {
+ struct snd_kcontrol *slave = ctl_find(card, *list);
+ /* dev_dbg(card->dev, "add_slaves - %s\n", *list); */
+ if (slave) {
+ /* dev_dbg(card->dev, "slave %s found\n", *list); */
+ snd_ctl_add_slave(master, slave);
+ }
+ }
+}
+
+static int juli_add_controls(struct snd_ice1712 *ice)
+{
+ struct juli_spec *spec = ice->spec;
+ int err;
+ unsigned int i;
+ struct snd_kcontrol *vmaster;
+
+ err = snd_ice1712_akm4xxx_build_controls(ice);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(juli_mute_controls); i++) {
+ err = snd_ctl_add(ice->card,
+ snd_ctl_new1(&juli_mute_controls[i], ice));
+ if (err < 0)
+ return err;
+ }
+ /* Create virtual master control */
+ vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
+ juli_master_db_scale);
+ if (!vmaster)
+ return -ENOMEM;
+ add_slaves(ice->card, vmaster, slave_vols);
+ err = snd_ctl_add(ice->card, vmaster);
+ if (err < 0)
+ return err;
+
+ /* only capture SPDIF over AK4114 */
+ return snd_ak4114_build(spec->ak4114, NULL,
+ ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+}
+
+/*
+ * suspend/resume
+ * */
+
+#ifdef CONFIG_PM_SLEEP
+static int juli_resume(struct snd_ice1712 *ice)
+{
+ struct snd_akm4xxx *ak = ice->akm;
+ struct juli_spec *spec = ice->spec;
+ /* akm4358 un-reset, un-mute */
+ snd_akm4xxx_reset(ak, 0);
+ /* reinit ak4114 */
+ snd_ak4114_resume(spec->ak4114);
+ return 0;
+}
+
+static int juli_suspend(struct snd_ice1712 *ice)
+{
+ struct snd_akm4xxx *ak = ice->akm;
+ struct juli_spec *spec = ice->spec;
+ /* akm4358 reset and soft-mute */
+ snd_akm4xxx_reset(ak, 1);
+ snd_ak4114_suspend(spec->ak4114);
+ return 0;
+}
+#endif
+
+/*
+ * initialize the chip
+ */
+
+static inline int juli_is_spdif_master(struct snd_ice1712 *ice)
+{
+ return (ice->gpio.get_data(ice) & GPIO_INTERNAL_CLOCK) ? 0 : 1;
+}
+
+static unsigned int juli_get_rate(struct snd_ice1712 *ice)
+{
+ int i;
+ unsigned char result;
+
+ result = ice->gpio.get_data(ice) & GPIO_RATE_MASK;
+ for (i = 0; i < ARRAY_SIZE(gpio_vals); i++)
+ if (gpio_vals[i] == result)
+ return juli_rates[i];
+ return 0;
+}
+
+/* setting new rate */
+static void juli_set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+ unsigned int old, new;
+ unsigned char val;
+
+ old = ice->gpio.get_data(ice);
+ new = (old & ~GPIO_RATE_MASK) | get_gpio_val(rate);
+ /* dev_dbg(ice->card->dev, "JULI - set_rate: old %x, new %x\n",
+ old & GPIO_RATE_MASK,
+ new & GPIO_RATE_MASK); */
+
+ ice->gpio.set_data(ice, new);
+ /* switching to external clock - supplied by external circuits */
+ val = inb(ICEMT1724(ice, RATE));
+ outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+}
+
+static inline unsigned char juli_set_mclk(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ /* no change in master clock */
+ return 0;
+}
+
+/* setting clock to external - SPDIF */
+static int juli_set_spdif_clock(struct snd_ice1712 *ice, int type)
+{
+ unsigned int old;
+ old = ice->gpio.get_data(ice);
+ /* external clock (= 0), multiply 1x, 48kHz */
+ ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X |
+ GPIO_FREQ_48KHZ);
+ return 0;
+}
+
+/* Called when ak4114 detects change in the input SPDIF stream */
+static void juli_ak4114_change(struct ak4114 *ak4114, unsigned char c0,
+ unsigned char c1)
+{
+ struct snd_ice1712 *ice = ak4114->change_callback_private;
+ int rate;
+ if (ice->is_spdif_master(ice) && c1) {
+ /* only for SPDIF master mode, rate was changed */
+ rate = snd_ak4114_external_rate(ak4114);
+ /* dev_dbg(ice->card->dev, "ak4114 - input rate changed to %d\n",
+ rate); */
+ juli_akm_set_rate_val(ice->akm, rate);
+ }
+}
+
+static int juli_init(struct snd_ice1712 *ice)
+{
+ static const unsigned char ak4114_init_vals[] = {
+ /* AK4117_REG_PWRDN */ AK4114_RST | AK4114_PWN |
+ AK4114_OCKS0 | AK4114_OCKS1,
+ /* AK4114_REQ_FORMAT */ AK4114_DIF_I24I2S,
+ /* AK4114_REG_IO0 */ AK4114_TX1E,
+ /* AK4114_REG_IO1 */ AK4114_EFH_1024 | AK4114_DIT |
+ AK4114_IPS(1),
+ /* AK4114_REG_INT0_MASK */ 0,
+ /* AK4114_REG_INT1_MASK */ 0
+ };
+ static const unsigned char ak4114_init_txcsb[] = {
+ 0x41, 0x02, 0x2c, 0x00, 0x00
+ };
+ int err;
+ struct juli_spec *spec;
+ struct snd_akm4xxx *ak;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ ice->spec = spec;
+
+ err = snd_ak4114_create(ice->card,
+ juli_ak4114_read,
+ juli_ak4114_write,
+ ak4114_init_vals, ak4114_init_txcsb,
+ ice, &spec->ak4114);
+ if (err < 0)
+ return err;
+ /* callback for codecs rate setting */
+ spec->ak4114->change_callback = juli_ak4114_change;
+ spec->ak4114->change_callback_private = ice;
+ /* AK4114 in Juli can detect external rate correctly */
+ spec->ak4114->check_flags = 0;
+
+#if 0
+/*
+ * it seems that the analog doughter board detection does not work reliably, so
+ * force the analog flag; it should be very rare (if ever) to come at Juli@
+ * used without the analog daughter board
+ */
+ spec->analog = (ice->gpio.get_data(ice) & GPIO_ANALOG_PRESENT) ? 0 : 1;
+#else
+ spec->analog = 1;
+#endif
+
+ if (spec->analog) {
+ dev_info(ice->card->dev, "juli@: analog I/O detected\n");
+ ice->num_total_dacs = 2;
+ ice->num_total_adcs = 2;
+
+ ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
+ ak = ice->akm;
+ if (!ak)
+ return -ENOMEM;
+ ice->akm_codecs = 1;
+ err = snd_ice1712_akm4xxx_init(ak, &akm_juli_dac, NULL, ice);
+ if (err < 0)
+ return err;
+ }
+
+ /* juli is clocked by Xilinx array */
+ ice->hw_rates = &juli_rates_info;
+ ice->is_spdif_master = juli_is_spdif_master;
+ ice->get_rate = juli_get_rate;
+ ice->set_rate = juli_set_rate;
+ ice->set_mclk = juli_set_mclk;
+ ice->set_spdif_clock = juli_set_spdif_clock;
+
+ ice->spdif.ops.open = juli_spdif_in_open;
+
+#ifdef CONFIG_PM_SLEEP
+ ice->pm_resume = juli_resume;
+ ice->pm_suspend = juli_suspend;
+ ice->pm_suspend_enabled = 1;
+#endif
+
+ return 0;
+}
+
+
+/*
+ * Juli@ boards don't provide the EEPROM data except for the vendor IDs.
+ * hence the driver needs to sets up it properly.
+ */
+
+static unsigned char juli_eeprom[] = {
+ [ICE_EEP2_SYSCONF] = 0x2b, /* clock 512, mpu401, 1xADC, 1xDACs,
+ SPDIF in */
+ [ICE_EEP2_ACLINK] = 0x80, /* I2S */
+ [ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
+ [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
+ [ICE_EEP2_GPIO_DIR] = 0x9f, /* 5, 6:inputs; 7, 4-0 outputs*/
+ [ICE_EEP2_GPIO_DIR1] = 0xff,
+ [ICE_EEP2_GPIO_DIR2] = 0x7f,
+ [ICE_EEP2_GPIO_MASK] = 0x60, /* 5, 6: locked; 7, 4-0 writable */
+ [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0-7 writable */
+ [ICE_EEP2_GPIO_MASK2] = 0x7f,
+ [ICE_EEP2_GPIO_STATE] = GPIO_FREQ_48KHZ | GPIO_MULTI_1X |
+ GPIO_INTERNAL_CLOCK, /* internal clock, multiple 1x, 48kHz*/
+ [ICE_EEP2_GPIO_STATE1] = 0x00, /* unmuted */
+ [ICE_EEP2_GPIO_STATE2] = 0x00,
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_juli_cards[] = {
+ {
+ .subvendor = VT1724_SUBDEVICE_JULI,
+ .name = "ESI Juli@",
+ .model = "juli",
+ .chip_init = juli_init,
+ .build_controls = juli_add_controls,
+ .eeprom_size = sizeof(juli_eeprom),
+ .eeprom_data = juli_eeprom,
+ },
+ { } /* terminator */
+};