[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/kernel/linux/v4.14/sound/soc/omap/Kconfig b/src/kernel/linux/v4.14/sound/soc/omap/Kconfig
new file mode 100644
index 0000000..f5451c7
--- /dev/null
+++ b/src/kernel/linux/v4.14/sound/soc/omap/Kconfig
@@ -0,0 +1,125 @@
+config SND_OMAP_SOC
+ tristate "SoC Audio for the Texas Instruments OMAP chips"
+ depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
+ select SND_DMAENGINE_PCM
+
+config SND_OMAP_SOC_DMIC
+ tristate
+
+config SND_OMAP_SOC_MCBSP
+ tristate
+
+config SND_OMAP_SOC_MCPDM
+ tristate
+
+config SND_OMAP_SOC_HDMI_AUDIO
+ tristate "HDMI audio support for OMAP4+ based SoCs"
+ depends on SND_OMAP_SOC
+ help
+ For HDMI audio to work OMAPDSS HDMI support should be
+ enabled.
+ The hdmi audio driver implements cpu-dai component using the
+ callbacks provided by OMAPDSS and registers the component
+ under DSS HDMI device. Omap-pcm is registered for platform
+ component also under DSS HDMI device. Dummy codec is used as
+ as codec component. The hdmi audio driver implements also
+ the card and registers it under its own platform device.
+ The device for the driver is registered by OMAPDSS hdmi
+ driver.
+
+config SND_OMAP_SOC_N810
+ tristate "SoC Audio support for Nokia N810"
+ depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+ depends on OMAP_MUX
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TLV320AIC3X
+ help
+ Say Y if you want to add support for SoC audio on Nokia N810.
+
+config SND_OMAP_SOC_RX51
+ tristate "SoC Audio support for Nokia N900 (RX-51)"
+ depends on SND_OMAP_SOC && ARM && I2C
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TLV320AIC3X
+ select SND_SOC_TPA6130A2
+ depends on GPIOLIB
+ help
+ Say Y if you want to add support for SoC audio on Nokia N900
+ cellphone.
+
+config SND_OMAP_SOC_AMS_DELTA
+ tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
+ depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_CX20442
+ help
+ Say Y if you want to add support for SoC audio device connected to
+ a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
+
+ Note that in order to get those devices fully supported, you have to
+ build the kernel with standard serial port driver included and
+ configured for at least 4 ports. Then, from userspace, you must load
+ a line discipline #19 on the modem (ttyS3) serial line. The simplest
+ way to achieve this is to install util-linux-ng and use the included
+ ldattach utility. This can be started automatically from udev,
+ a simple rule like this one should do the trick (it does for me):
+ ACTION=="add", KERNEL=="controlC0", \
+ RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
+
+config SND_OMAP_SOC_OSK5912
+ tristate "SoC Audio support for omap osk5912"
+ depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TLV320AIC23_I2C
+ help
+ Say Y if you want to add support for SoC audio on osk5912.
+
+config SND_OMAP_SOC_AM3517EVM
+ tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
+ depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TLV320AIC23_I2C
+ help
+ Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
+ EVM.
+
+config SND_OMAP_SOC_OMAP_TWL4030
+ tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
+ depends on TWL4030_CORE && SND_OMAP_SOC
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on TI SoC based boards
+ using twl4030 as c codec. This driver currently supports:
+ - Beagleboard or Devkit8000
+ - Gumstix Overo or CompuLab CM-T35/CM-T3730
+ - IGEP v2
+ - OMAP3EVM
+ - SDP3430
+ - Zoom2
+
+config SND_OMAP_SOC_OMAP_ABE_TWL6040
+ tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
+ depends on TWL6040_CORE && SND_OMAP_SOC && COMMON_CLK
+ depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
+ select SND_OMAP_SOC_DMIC
+ select SND_OMAP_SOC_MCPDM
+ select SND_SOC_TWL6040
+ select SND_SOC_DMIC
+ select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
+ select CLK_TWL6040
+ help
+ Say Y if you want to add support for SoC audio on OMAP boards using
+ ABE and twl6040 codec. This driver currently supports:
+ - SDP4430/Blaze boards
+ - PandaBoard (4430)
+ - PandaBoardES (4460)
+ - omap5-uevm (5432)
+
+config SND_OMAP_SOC_OMAP3_PANDORA
+ tristate "SoC Audio support for OMAP3 Pandora"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on the OMAP3 Pandora.