[Feature]add MT2731_MP2_MR2_SVN388 baseline version
Change-Id: Ief04314834b31e27effab435d3ca8ba33b499059
diff --git a/src/lynq/lib/liblynq-tele-ril/lynq-riltel/em/em.h b/src/lynq/lib/liblynq-tele-ril/lynq-riltel/em/em.h
new file mode 100644
index 0000000..44e3e13
--- /dev/null
+++ b/src/lynq/lib/liblynq-tele-ril/lynq-riltel/em/em.h
@@ -0,0 +1,149 @@
+/* Copyright Statement:
+ *
+ * This software/firmware and related documentation ("MediaTek Software") are
+ * protected under relevant copyright laws. The information contained herein
+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
+ * Without the prior written permission of MediaTek inc. and/or its licensors,
+ * any reproduction, modification, use or disclosure of MediaTek Software,
+ * and information contained herein, in whole or in part, shall be strictly prohibited.
+ */
+/* MediaTek Inc. (C) 2010. All rights reserved.
+ *
+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+ *
+ * The following software/firmware and/or related documentation ("MediaTek Software")
+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
+ * applicable license agreements with MediaTek Inc.
+ */
+#ifndef __RIL_EM_API__
+#define __RIL_EM_API__
+
+#include <vendor-ril/telephony/ril.h>
+#include <string>
+#include <vector>
+
+#include "common.h"
+
+typedef struct em_arry_{
+ char *name; /* main test name. */
+ int subcnt;
+ struct em_arry_ *subarray; /* Function to call to do the job. */
+ int unsol;
+ int reply;
+} em_arry_t;
+extern em_arry_t lte_info[];
+extern em_arry_t ims_setting[];
+extern em_arry_t ims_common[];
+extern em_arry_t ims_call[] ;
+extern em_arry_t ims_registration[];
+extern em_arry_t ims[];
+extern em_arry_t gprs[];
+extern em_arry_t networkselection[];
+extern em_arry_t modem_cta[];
+extern em_arry_t modem_fta[];
+extern em_arry_t modem_C2K_Test_MODEM[];
+extern em_arry_t modemtest[];
+extern em_arry_t hspa[];
+extern em_arry_t cfu[];
+extern em_arry_t bandmode[];
+extern em_arry_t networkinfo[];
+extern em_arry_t antenna_4Gmode[];
+extern em_arry_t antenna_3Gmode[];
+extern em_arry_t antennatest[];
+extern em_arry_t time_reg[];
+extern em_arry_t c2k_modem_setting[];
+extern em_arry_t set_get[];
+extern em_arry_t rfdesense_gsm_band[];
+extern em_arry_t rfdesense_gsm_pattern[];
+extern em_arry_t rfdesense_gsm_sub[];
+extern em_arry_t rfdesense_gsm[];
+extern em_arry_t rfdesense_tdscdma_band[];
+extern em_arry_t rfdesense_tdscdma_sub[];
+extern em_arry_t rfdesense_tdscdma[];
+extern em_arry_t rfdesense_wcdma_band[];
+extern em_arry_t rfdesense_wcdma_sub[];
+extern em_arry_t rfdesense_wcdma[];
+extern em_arry_t rfdesense_lte_mode[];
+extern em_arry_t rfdesense_fdd_band[] ;
+extern em_arry_t rfdesense_lte_bandwidth[];
+extern em_arry_t rfdesense_lte_mcs[];
+extern em_arry_t rfdesense_fdd_sub[];
+extern em_arry_t rfdesense_lte_fdd[];
+extern em_arry_t rfdesense_tdd_band[];
+extern em_arry_t rfdesense_tdd_config[];
+extern em_arry_t rfdesense_tdd_special[];
+extern em_arry_t rfdesense_tdd_sub[];
+extern em_arry_t rfdesense_lte_tdd[];
+extern em_arry_t rfdesense_cdma_band[];
+extern em_arry_t rfdesense_cdma_modulation[];
+extern em_arry_t rfdesense_cdma_sub[];
+extern em_arry_t rfdesense_cdma[];
+extern em_arry_t sub_tx_test[];
+extern em_arry_t desense_test[];
+extern em_arry_t emmain[];
+
+#define RET_STRING_IMS_SUCCESS "IMS test success\ndone\n"
+#define RET_STRING_IMS_FAIL "IMS test fail\ndone\n"
+#define RET_STRING_GPRS_SUCCESS "GPRS test success\ndone\n"
+#define RET_STRING_GPRS_FAIL "GPRS test fail\ndone\n"
+#define RET_STRING_NWSELECTION_SUCCESS "Network Selection success\ndone\n"
+#define RET_STRING_NWSELECTION_FAIL "Network Selection fail\ndone\n"
+#define RET_STRING_MODEMTEST_SUCCESS "Modem test success\ndone\n"
+#define RET_STRING_MODEMTEST_FAIL "Modem test fail\ndone\n"
+#define RET_STRING_HSPA_SUCCESS "HSPA test success\ndone\n"
+#define RET_STRING_HSPA_FAIL "HSPA test fail\ndone\n"
+#define RET_STRING_LTE_SUCCESS "LTE success\ndone\n"
+#define RET_STRING_LTE_FAIL "LTE fail\ndone\n"
+#define RET_STRING_CFU_SUCCESS "CFU success\ndone\n"
+#define RET_STRING_CFU_FAIL "CFU fail\ndone\n"
+#define RET_STRING_BANDMODE_SUCCESS "Bandmode success\ndone\n"
+#define RET_STRING_BANDMODE_FAIL "Bandmode fail\ndone\n"
+#define RET_STRING_NWINFO_SUCCESS "NetworkInfo success\ndone\n"
+#define RET_STRING_NWINFO_FAIL "NetworkInfo fail\ndone\n"
+#define RET_STRING_ANTENNATEST_SUCCESS "Antenna test success\ndone\n"
+#define RET_STRING_ANTENNATEST_FAIL "Antenna test fail\ndone\n"
+#define RET_STRING_C2K_MODEM_SETTING_SUCCESS "c2k modem setting success\ndone\n";
+#define RET_STRING_C2K_MODEM_SETTING_FAIL "c2k modem setting fail\ndone\n";
+
+int emImsStart(int argc, int *item,char *value);
+int emGprsStart(int argc, int *item,char *value);
+int emNetworkSelectionStart(int argc,int selectpos);
+int emModemtestStart(int argc, int multicnt,int *item);
+int emHspaStart(int argc, int *item);
+int lte_em_start(int argc, int multicnt,int *item);
+int em_el1_start(int argc, int multicnt,int *item);
+int emCfuStart(int argc, int *item);
+int emBandmodeStart(int len,int *item,int multilen,char *value[]);
+int emNwInfoStart(int argc, int multicnt,int *item);
+int emAntennaTestStart(int argc, int *item,char *value);
+int emC2kModemSettingStart(int argc, int multicnt,int *item);
+int emRfDesenseStart(int len,int *item,int multilen,char *value[]);
+
+std::vector<std::string> getCdmaCmdArr(std::vector<std::string> cmdArray);
+int em_result_notify_fail(std::string str);
+int em_result_notify_ok(std::string str);
+int em_result_notify_error(std::string str);
+int emResultNotifyWithDone(std::string str);
+int emResultNotifyEx(std::string str);
+int em_result_only_msg(std::string str);
+void emSendATCommand(const char *cmd, int soc_id);
+void emEnableRadio(bool isEnable, int soc_id);
+int em_start(int argc, char *argv[], RIL_SOCKET_ID socket_id, RequestInfo *pRI);
+#endif