| #!/usr/bin/perl |
| # |
| # Copyright Statement: |
| # -------------------- |
| # This software is protected by Copyright and the information contained |
| # herein is confidential. The software may not be copied and the information |
| # contained herein may not be used or disclosed except with the written |
| # permission of MediaTek Inc. (C) 2006 |
| # |
| # BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| # THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| # RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| # AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| # EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| # NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| # SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| # SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| # THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| # NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| # SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| # |
| # BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| # LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| # AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| # OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| # MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| # |
| # THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| # WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| # LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| # RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| # THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| # |
| #**************************************************************************** |
| #* |
| #* Filename: |
| #* --------- |
| #* emigenMD.pl |
| #* |
| #* Project: |
| #* -------- |
| #* |
| #* |
| #* Description: |
| #* ------------ |
| #* generate emi/flash configuration files |
| #* |
| #* Author: |
| #* ------- |
| #* Guo-Huei Chang (mtk04123) |
| #* Way Chen (mtk54483) |
| #**************************************************************************** |
| |
| #**************************************************************************** |
| # Included Modules |
| #**************************************************************************** |
| use strict; |
| use warnings; |
| use Class::Struct (); |
| use File::Basename (); |
| use File::Copy (); |
| use File::Spec (); |
| use POSIX (); |
| use Storable (); |
| push @INC, ("tools/perl","."); |
| require Spreadsheet::ParseExcel; |
| |
| local $| = 1; #auto flush 'print' function |
| |
| my $EMIGEN_VERNO = "v10.001"; |
| #v10.001, by Holmes at 2019/08/01, modify for MT6297 |
| # v9.008, by Guo-Huei at 2014/04/15, Update EMIGEN to generate SmartPhone's DRAM Size by MDL |
| # v9.007, by Guo-Huei at 2014/01/08, Update EMIGEN for SmartPhone project |
| # v9.006, by Guo-Huei at 2013/12/09, Update custom_EMI for MT6595 |
| # v9.005, by Way at 2013/11/15, Optimal EMIGEN Flash Part Code for ROME. |
| # v9.004, by Guo-Huei at 2013/11/06, update emigen for MT6595 build pass |
| # v9.003, by Way at 2013/10/24, Support MP Level MDL |
| # v9.002, by Guo-Huei at 2013/08/07, 1. remove lagacy code. 2. auto-generate header file according MDL content 3. Add combo memory support 4. error check for combo memory configuration. |
| # v9.001, by Guo-Huei at 2013/08/05, 1. remove lagacy code. 2. re-arch emigen flow. 3. remove WIN32 OLE related code. 4. use warnings |
| # v8.276, by Way at 2013/06/24, 1. remove lagacy code; 2. Re-arch EMIGEN flow; 3. Implement combo flash part auto gen flow; 4. Add combo_nfi_config.h for enhance NAND flash flow of mT6290. |
| # v8.275, by Way at 2013/06/7, enable auto emigen flash part. |
| # v8.274, by Way at 2013/05/23, change checking smart phone method without flash. |
| # v8.273, by Guo-Huei at 2013/05/15, change checking smart phone method without emi. |
| # v8.272, by Guo-Huei at 2013/05/02, add emigen to support combo memory. |
| # v8.271, by Guo-Huei at 2013/04/12, update emigen to auto-gen custom_EMI_INFO.h |
| # v8.270, by Guo-Huei at 2013/03/27, update emigen to support parsing flash. |
| # v8.269, by Guo-Huei at 2013/03/22, update emigen to auto-generate emi related output files. |
| # v8.268, by Guo-Huei at 2013/03/19, update custom_EMI function and cfggen EMI part |
| # v8.267, by Guo-Huei at 2013/02/05, rename emigen from MT7208 to MT6290 |
| # v8.266, by Marvin at 2012/11/01 , autogen support MT6290 |
| my $DebugPrint = 0; # 1 for debug; 0 for non-debug |
| |
| my $BOOL_EMI_CLEAN = $ARGV[0]; # FALSE |
| my $CUSTOM_MEMORY_DEVICE_HDR = $ARGV[1]; # ./work/custom/TK6291E1_SUPER_HOSTED/system/custom_MemoryDevice.h |
| my $THEMF = $ARGV[2]; # ./work/custom/TK6291E1_SUPER_HOSTED/build/customer_feature_option |
| my $BOOL_MD_INFO = $ARGV[3]; # FALSE |
| my $INSIDE_MTK = $ARGV[4]; # 1 |
| my $LOAD_TMP_PATH = $ARGV[5]; # ./out/tmp/TK6291E1_SUPER_HOSTED |
| my $CUSTOM_SYSTEM_DIR = File::Basename::dirname($CUSTOM_MEMORY_DEVICE_HDR); |
| my $CUSTOM_FEATURE_CONFIG_HDR = File::Spec->catfile($CUSTOM_SYSTEM_DIR, "custom_FeatureConfig.h"); |
| |
| # to align error message file name format |
| $CUSTOM_MEMORY_DEVICE_HDR =~ s/^.\\|^\\//; |
| $THEMF =~ s/^.\\|^\\//; |
| |
| # global parameters |
| my %PART_NUMBER; |
| my $emi_clk_config; |
| my $sfi_clk_config; |
| my %BBtbl_SFI_FAST_CLK = ( 'MT6291' => 78 ); |
| my %BBtbl_SFI_SLOW_CLK = ( 'MT6291' => 13 ); |
| my $NOR_FLASH_BASE_ADDRESS_VAL; |
| my $NOR_ALLOCATED_FAT_SPACE_VAL; |
| my $LPSDRAM_CHIP_SELECT = 0xFF; |
| my $emi_is_existed = 1; |
| my @MCP_LIST; # list of PART_NUMBER hash references |
| my @MDL_INFO_LIST; # list of MEM_DEV_LIST_INFO has references |
| my %COMM_MDL_INFO; # common MDL info, obtained from MDL_INFO_LIST. |
| my %MAKEFILE_OPTIONS; #list of makefile option |
| my %CUSTOM_MEM_DEV_OPTIONS; #list of custom_memory_device option |
| my %CUSTOM_FEATURE_CFG_OPTIONS; |
| my $MEMORY_DEVICE_LIST_XLS; #CORRECT MDL FILE |
| my $MEMORY_DEVICE_LIST_INT_XLS; #INTERNAL MDL FILE |
| |
| print "os environment: $^O\n"; |
| print "load temp path: $LOAD_TMP_PATH\n"; |
| print "custom memory device: $CUSTOM_MEMORY_DEVICE_HDR\n"; |
| print "makefile: $THEMF\n"; |
| print "inside_mtk: $INSIDE_MTK\n"; |
| |
| require "tools/emigenemi.pl"; |
| require "tools/emigenflash.pl"; |
| |
| #**************************************************************************** |
| # parse makefile |
| #**************************************************************************** |
| &Parse_Makefile(); |
| if ($MAKEFILE_OPTIONS{'platform'} =~ '^MT629[1235]$') { |
| $MAKEFILE_OPTIONS{'platform'} = 'MT6291'; |
| } elsif ($MAKEFILE_OPTIONS{'platform'} =~ '^MT629[78]$') { |
| $MAKEFILE_OPTIONS{'platform'} = 'MT6297'; |
| } else { |
| &error_handler("not support platform, ".$MAKEFILE_OPTIONS{'platform'}, __FILE__, __LINE__); |
| } |
| |
| #**************************************************************************** |
| # generated file list |
| #**************************************************************************** |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "generated file list"; |
| Class::Struct::struct(GEN_FLS_S => {name => '$', owner => '$', path => '$', exist => '$', description => '$'}); |
| my %GEN_FLS = ( |
| custom_emi_h => GEN_FLS_S->new(name => (($MAKEFILE_OPTIONS{'platform'} eq 'MT6291')? "custom_EMI.h": "custom_emi.h"), owner => "holmes.lin (mtk09097)", description => "This Module defines the EMI (external memory interface) related setting."), |
| custom_emi_info_c => GEN_FLS_S->new(name => "custom_EMI_INFO.c", owner => "holmes.lin (mtk09097)", description => "This Module defines the EMI (external memory interface) related setting."), |
| custom_emi_release_h => GEN_FLS_S->new(name => "custom_EMI_release.h", owner => "holmes.lin (mtk09097)", description => "This Module defines the EMI (external memory interface) related setting."), |
| #custom_emi_c => GEN_FLS_S->new(name => "custom_EMI.c", owner => "holmes.lin (mtk09097)", description => ""), |
| #custom_sfi_h => GEN_FLS_S->new(name => "custom_SFI.h", owner => "way.chen (mtk54483)", description => ""), |
| custom_flash_h => GEN_FLS_S->new(name => "custom_flash.h", owner => "way.chen (mtk54483)", description => "This Module defines flash related settings."), |
| flash_opt_gen_h => GEN_FLS_S->new(name => "flash_opt_gen.h", owner => "way.chen (mtk54483)", description => "NOR flash related options."), |
| custom_flash_norfdm5_h => GEN_FLS_S->new(name => "custom_flash_norfdm5.h", owner => "way.chen (mtk54483)", description => "defines prototypes and data structure which will be used in NOR FDM 5.0"), |
| combo_flash_config_h => GEN_FLS_S->new(name => "combo_flash_config.h", owner => "way.chen (mtk54483)", description => "This Module defines the Flash configurations for Combo Memory."), |
| combo_flash_id_h => GEN_FLS_S->new(name => "combo_flash_id.h", owner => "way.chen (mtk54483)", description => "This Module defines the Flash ID table for Combo Memory."), |
| #combo_sfi_config_h => GEN_FLS_S->new(name => "combo_sfi_config.h", owner => "way.chen (mtk54483)", description => ""), |
| combo_sfi_defs_h => GEN_FLS_S->new(name => "combo_sfi_defs.h", owner => "way.chen (mtk54483)", description => "defines flash ID table"), |
| #custom_sfi_clock_h => GEN_FLS_S->new(name => "custom_sfi_clock.h", owner => "way.chen (mtk54483)", description => ""), |
| combo_nfi_config_h => GEN_FLS_S->new(name => "combo_nfi_config.h", owner => "way.chen (mtk54483)", description => "gen NAND Flash Related Configuration and Table"), |
| ); |
| map {$GEN_FLS{$_}->path(File::Spec->catfile($CUSTOM_SYSTEM_DIR, $GEN_FLS{$_}->name))} keys(%GEN_FLS); |
| print "output file: ", join(", ", map {$GEN_FLS{$_}->path} sort(keys(%GEN_FLS))), "\n"; |
| |
| #**************************************************************************** |
| # emiclean |
| #**************************************************************************** |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "emiclean"; |
| my @gen_depends = ("tools/emigenMD.pl", "tools/emigenSP.pl", "tools/emigenemi.pl", "tools/emigenflash.pl", "tools/emigenSF.pl", $THEMF, $CUSTOM_MEMORY_DEVICE_HDR, $MEMORY_DEVICE_LIST_XLS, $MEMORY_DEVICE_LIST_INT_XLS, $CUSTOM_FEATURE_CONFIG_HDR); |
| if ($BOOL_EMI_CLEAN eq 'TRUE') { |
| map {&Check_ManualCheckIn($GEN_FLS{$_}->path, "TRUE", @gen_depends)} keys(%GEN_FLS); |
| exit; |
| } else { |
| map {&Check_ManualCheckIn($GEN_FLS{$_}->path, "FALSE", @gen_depends)} keys(%GEN_FLS); |
| } |
| map {$GEN_FLS{$_}->exist((-e $GEN_FLS{$_}->path)? 1: 0)} keys(%GEN_FLS); |
| |
| #**************************************************************************** |
| # find the correct EMI database |
| #**************************************************************************** |
| &Find_MDL(); |
| |
| #**************************************************************************** |
| # parse custom_MemoryDevice.h to extract MEMORY_DEVICE_TYPE & PART_NUMBER |
| #**************************************************************************** |
| &Parse_Memory_Device(); |
| |
| #**************************************************************************** |
| # parse custom_FeatureConfig.h to extract feature-related configurations |
| #**************************************************************************** |
| &Parse_custom_FeatureConfig(); |
| |
| #**************************************************************************** |
| # Check EMI exist |
| #**************************************************************************** |
| if ($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} eq 'NONE') |
| { |
| require "tools/emiGenSP.pl"; |
| $emi_is_existed = 0; |
| } |
| |
| #**************************************************************************** |
| # parse EMI database to get EMI settings |
| #**************************************************************************** |
| &Parse_MDL(); |
| |
| #**************************************************************************** |
| # Check Combo Memory configuration validity |
| #**************************************************************************** |
| my $nor_size_Mb; |
| &CheckConfigValid(); |
| |
| #**************************************************************************** |
| # check consistency among FEATURE, MEMORY_DEVICE_TYPE, PLATFORM, MCU_CLOCK and MemoryDeviceList data |
| #**************************************************************************** |
| $sfi_clk_config = $BBtbl_SFI_FAST_CLK{$MAKEFILE_OPTIONS{'platform'}}; |
| &Decide_MemClockSpeed(); |
| |
| #**************************************************************************** |
| # get common MDL information from a list of MDL information for Combo Memory |
| #**************************************************************************** |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "get_common_MDL_info"; |
| &get_common_MDL_info(\@MDL_INFO_LIST, \%CUSTOM_MEM_DEV_OPTIONS, \%COMM_MDL_INFO,\%MAKEFILE_OPTIONS, $LPSDRAM_CHIP_SELECT, $CUSTOM_MEMORY_DEVICE_HDR, $emi_is_existed); |
| if ($DebugPrint == 1) |
| { |
| print "COMM_MDL_INFO: Flash Size = $COMM_MDL_INFO{0}->{'Flash Size'}, NAND Block Size(KB) = $COMM_MDL_INFO{0}->{'NAND Block Size(KB)'}, Small Block Start = $COMM_MDL_INFO{0}->{'Small Block Start'}, Default FAT Base = $COMM_MDL_INFO{0}->{'Default FAT Base'}, Default FAT Size = $COMM_MDL_INFO{0}->{'Default FAT Size'}\n"; |
| #print "RAM \"Size (Mb)\" = $COMM_MDL_INFO{1}->{'Size (Mb)'}, \"CS0 ADMUX\" = $COMM_MDL_INFO{0}->{'ADMUX'}, \"CS1 ADMUX\" = $COMM_MDL_INFO{1}->{'ADMUX'}, \"DRAM\" = $COMM_MDL_INFO{1}->{'DRAM'}, \"CS0 Comm. Series\" = $COMM_MDL_INFO{0}->{'Comm. Series'}, \"CS1 Comm. Series\" = $COMM_MDL_INFO{1}->{'Comm. Series'}, \"Bank\" = $COMM_MDL_INFO{0}->{'Bank'}, \"PBP->Y / N\" = $COMM_MDL_INFO{0}->{'PBP'}->{'Y / N'}, \"PBP->Size(W)\" = $COMM_MDL_INFO{0}->{'PBP'}->{'Size(W)'}\n"; |
| } |
| |
| #**************************************************************************** |
| # PROJECT EXPECTED CONFIGURE |
| #**************************************************************************** |
| my $physical_ram_density; |
| my $project_expected_ram_limit_common = (exists $MAKEFILE_OPTIONS{'nand_flash_booting'} and $MAKEFILE_OPTIONS{'nand_flash_booting'} ne 'NONE') ? $CUSTOM_FEATURE_CFG_OPTIONS{PROJECT_EXPECTED_RAM_LIMIT_NFB} : $CUSTOM_FEATURE_CFG_OPTIONS{PROJECT_EXPECTED_RAM_LIMIT}; |
| if (defined $project_expected_ram_limit_common) |
| { |
| #ensure practical |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Cannot configure expected RAMSIZE larger than physical RAM size!", __FILE__, __LINE__) |
| if ( hex($project_expected_ram_limit_common) > ($COMM_MDL_INFO{1}->{'Size (Mb)'} * 1024 * 1024 / 8) ); |
| |
| #ensure 2^n |
| my $i; |
| for( $i = 1 ; $i < hex($project_expected_ram_limit_common) ; $i *= 2 ){1;} |
| if ( $i < ($COMM_MDL_INFO{1}->{'Size (Mb)'} * 1024 * 1024 / 8) ) |
| { |
| $physical_ram_density = "// PHYSICAL RAM DENSITY $COMM_MDL_INFO{1}->{'Size (Mb)'} Mb\n"; |
| $COMM_MDL_INFO{1}->{'Size (Mb)'} = $i * 8 / ( 1024 * 1024); |
| } |
| } |
| chomp $physical_ram_density if (defined $physical_ram_density); |
| |
| #**************************************************************************** |
| # get common entire geometry information for Combo Memory |
| #**************************************************************************** |
| my (@entire_region_info_size_list, @entire_region_info_count_list, @entire_bank_info_size_list, @entire_bank_info_count_list); |
| my (@entire_block_info_start_list, @entire_block_info_size_list); |
| if ($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "get_common_MDL_Geo_info, convert_regions_to_blocks"; |
| &get_common_MDL_Geo_info(\@MDL_INFO_LIST, $CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}, $CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}, 0, $COMM_MDL_INFO{0}->{'Flash Size'}, \@entire_region_info_size_list, \@entire_region_info_count_list, \@entire_bank_info_size_list, \@entire_bank_info_count_list); |
| &convert_regions_to_blocks(0, \@entire_region_info_size_list, \@entire_region_info_count_list, \@entire_block_info_start_list, \@entire_block_info_size_list); |
| |
| } |
| #NAND Flash Also need to check FAT for MT6290, we may use NAND FAT Infomation |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "Calculate_FAT_Info"; |
| &Calculate_FAT_Info(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \%COMM_MDL_INFO, \@MDL_INFO_LIST, \$NOR_FLASH_BASE_ADDRESS_VAL, \$NOR_ALLOCATED_FAT_SPACE_VAL, $nor_size_Mb, \%CUSTOM_FEATURE_CFG_OPTIONS, \@entire_block_info_start_list, \@entire_block_info_size_list); |
| |
| #**************************************************************************** |
| # get common FS geometry information for Combo Memory |
| #**************************************************************************** |
| my (@fs_region_info_size_list, @fs_region_info_count_list, @fs_bank_info_size_list, @fs_bank_info_count_list); |
| my (@fs_block_info_start_list, @fs_block_info_size_list); |
| if ($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "get_common_MDL_Geo_info; convert_regions_to_blocks"; |
| &get_common_MDL_Geo_info(\@MDL_INFO_LIST, $CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}, $CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}, $NOR_FLASH_BASE_ADDRESS_VAL, $NOR_FLASH_BASE_ADDRESS_VAL+$NOR_ALLOCATED_FAT_SPACE_VAL, \@fs_region_info_size_list, \@fs_region_info_count_list, \@fs_bank_info_size_list, \@fs_bank_info_count_list); |
| &convert_regions_to_blocks($NOR_FLASH_BASE_ADDRESS_VAL, \@fs_region_info_size_list, \@fs_region_info_count_list, \@fs_block_info_start_list, \@fs_block_info_size_list); |
| if ($DebugPrint == 1) |
| { |
| print "Entire RegionInfo: "; |
| for (0..$#entire_region_info_size_list) |
| { |
| print "\{$entire_region_info_size_list[$_], $entire_region_info_count_list[$_]\}, "; |
| } |
| print "\nEntire BankInfo: "; |
| for (0..$#entire_bank_info_size_list) |
| { |
| print "\{$entire_bank_info_size_list[$_], $entire_bank_info_count_list[$_]\}, "; |
| } |
| print "\nEntire BlockInfo: "; |
| for (0..$#entire_block_info_start_list) |
| { |
| print "\{$entire_block_info_start_list[$_], $entire_block_info_size_list[$_]\}, "; |
| } |
| print "\nFS RegionInfo: "; |
| for (0..$#fs_region_info_size_list) |
| { |
| print "\{$fs_region_info_size_list[$_], $fs_region_info_count_list[$_]\}, "; |
| } |
| print "\nFS BankInfo: "; |
| for (0..$#fs_bank_info_size_list) |
| { |
| print "\{$fs_bank_info_size_list[$_], $fs_bank_info_count_list[$_]\}, "; |
| } |
| print "\nFS BlockInfo: "; |
| for (0..$#fs_block_info_start_list) |
| { |
| print "\{$fs_block_info_start_list[$_], $fs_block_info_size_list[$_]\}, "; |
| } |
| print "\n"; |
| } |
| } |
| |
| ### Validate FAT and NOR Raw disk overlapping case |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "Validate_FAT_NORRAWDISK_OVERLAP; Calculate_NORRAWDISK_Region_Info"; |
| &Validate_FAT_NORRAWDISK_OVERLAP(\%CUSTOM_MEM_DEV_OPTIONS, \%COMM_MDL_INFO, \$NOR_FLASH_BASE_ADDRESS_VAL, \$NOR_ALLOCATED_FAT_SPACE_VAL, $CUSTOM_MEMORY_DEVICE_HDR); |
| ### Calculate NOR Raw disk Region Info |
| &Calculate_NORRAWDISK_Region_Info(\%CUSTOM_MEM_DEV_OPTIONS); |
| |
| ### Check CODE setting validity |
| my $expected_code_limit; |
| if (defined $CUSTOM_FEATURE_CFG_OPTIONS{PROJECT_EXPECTED_CODE_LIMIT}) |
| { |
| #ensure practical |
| &error_handler("$CUSTOM_FEATURE_CONFIG_HDR: Cannot configure expected CODESIZE larger than (physical NOR flash size - FAT space)!", __FILE__, __LINE__) |
| if ( hex($CUSTOM_FEATURE_CFG_OPTIONS{PROJECT_EXPECTED_CODE_LIMIT}) > $NOR_FLASH_BASE_ADDRESS_VAL ); |
| } |
| |
| #**************************************************************************** |
| # generate custom_EMI.h |
| #**************************************************************************** |
| if (($GEN_FLS{custom_emi_h}->exist == 0) and |
| ($MAKEFILE_OPTIONS{'platform'} =~ 'MT629[17]')) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "custom_emi_h"; |
| my $gf = $GEN_FLS{custom_emi_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| if ($emi_is_existed == 0) { |
| print GFH &custom_EMI_h_file_body_for_sp($MAKEFILE_OPTIONS{'platform'}); |
| } elsif ($MAKEFILE_OPTIONS{'platform'} eq 'MT6291') { |
| print GFH &custom_EMI_h_file_body_for_91(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS,\@MDL_INFO_LIST, \%COMM_MDL_INFO, \%PART_NUMBER, $CUSTOM_MEMORY_DEVICE_HDR, $LPSDRAM_CHIP_SELECT, $emi_clk_config); |
| } else { |
| print GFH &custom_emi_h_file_body_for_97(\%MAKEFILE_OPTIONS,\@MDL_INFO_LIST); |
| } |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate custom_EMI_INFO.c |
| #**************************************************************************** |
| if (($GEN_FLS{custom_emi_info_c}->exist == 0) and |
| ($MAKEFILE_OPTIONS{'platform'} eq 'MT6291')) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "custom_emi_info_c"; |
| my $gf = $GEN_FLS{custom_emi_info_c}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| if ($emi_is_existed == 0) { |
| print GFH &custom_EMI_info_h_file_body_for_sp($MAKEFILE_OPTIONS{'platform'}); |
| } else { |
| print GFH &custom_EMI_info_c_file_body_for_91(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS,\@MDL_INFO_LIST, \%COMM_MDL_INFO, \%PART_NUMBER, $CUSTOM_MEMORY_DEVICE_HDR, $LPSDRAM_CHIP_SELECT, $emi_clk_config); |
| } |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate custom_EMI_release.h |
| #**************************************************************************** |
| if (($GEN_FLS{custom_emi_release_h}->exist == 0) and |
| ($MAKEFILE_OPTIONS{'platform'} eq 'MT6291')) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "custom_emi_release_h"; |
| my $gf = $GEN_FLS{custom_emi_release_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| if ($emi_is_existed == 0) { |
| print GFH &custom_EMI_release_h_file_body_for_sp(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS,\@MDL_INFO_LIST, \%COMM_MDL_INFO, $LPSDRAM_CHIP_SELECT, $emi_clk_config); |
| } else { |
| print GFH &custom_EMI_release_h_file_body_for_91(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS,\@MDL_INFO_LIST, \%COMM_MDL_INFO, $LPSDRAM_CHIP_SELECT, $emi_clk_config); |
| } |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate flash_opt_gen.h |
| #**************************************************************************** |
| if ($GEN_FLS{flash_opt_gen_h}->exist == 0) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "flash_opt_gen_h"; |
| my $gf = $GEN_FLS{flash_opt_gen_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &flash_opt_gen_h_file_body(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS,\@MDL_INFO_LIST, \%COMM_MDL_INFO, $CUSTOM_MEMORY_DEVICE_HDR, $THEMF, \@entire_bank_info_size_list, \@entire_bank_info_count_list, \@entire_block_info_start_list, \@entire_block_info_size_list, \@entire_region_info_size_list, \@entire_region_info_count_list); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate custom_flash.h |
| #**************************************************************************** |
| if ($GEN_FLS{custom_flash_h}->exist == 0) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "custom_flash_h"; |
| my $gf = $GEN_FLS{custom_flash_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &custom_flash_h_file_body(\%MAKEFILE_OPTIONS,\%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO, \@MCP_LIST, $NOR_FLASH_BASE_ADDRESS_VAL, $NOR_ALLOCATED_FAT_SPACE_VAL, $LPSDRAM_CHIP_SELECT, $CUSTOM_MEMORY_DEVICE_HDR, $nor_size_Mb, \@entire_bank_info_size_list, \@entire_bank_info_count_list, \@entire_block_info_start_list, \@entire_block_info_size_list,\@fs_region_info_size_list, \@fs_region_info_count_list, \@entire_region_info_size_list, \@entire_region_info_count_list); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate custom_flash_norfdm5.h |
| #**************************************************************************** |
| if (($GEN_FLS{custom_flash_norfdm5_h}->exist == 0) and |
| (defined $CUSTOM_MEM_DEV_OPTIONS{__NOR_FDM5__})) ##Only __NOR_FDM5__ defined will gen custom_flash_norfdm5.h |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "custom_flash_norfdm5_h"; |
| my $gf = $GEN_FLS{custom_flash_norfdm5_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &custom_flash_norfdm5_h_file_body(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO, $NOR_FLASH_BASE_ADDRESS_VAL, $NOR_ALLOCATED_FAT_SPACE_VAL,\@entire_bank_info_size_list, \@entire_bank_info_count_list); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate combo_flash_config.h |
| #**************************************************************************** |
| if ($GEN_FLS{combo_flash_config_h}->exist == 0) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "combo_flash_config_h"; |
| my $gf = $GEN_FLS{combo_flash_config_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &combo_flash_config_h_file_body(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate combo_flash_id.h |
| #**************************************************************************** |
| if ($GEN_FLS{combo_flash_id_h}->exist == 0) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "combo_flash_id_h"; |
| my $gf = $GEN_FLS{combo_flash_id_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &combo_flash_id_h_file_body(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate combo_nfi_config.h |
| #**************************************************************************** |
| if (($GEN_FLS{combo_nfi_config_h}->exist == 0) and |
| ($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE') and |
| ($MAKEFILE_OPTIONS{'platform'} =~ /MT629[17]/)) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "combo_nfi_config_h"; |
| my $gf = $GEN_FLS{combo_nfi_config_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &combo_nfi_config_h_file_body(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| #**************************************************************************** |
| # generate combo_sfi_defs.h |
| #**************************************************************************** |
| if (($GEN_FLS{combo_sfi_defs_h}->exist == 0) and |
| ($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') and |
| ($MAKEFILE_OPTIONS{'platform'} =~ 'MT629[17]')) |
| { |
| printf "\n%s#%d: %s\n", __FILE__, __LINE__, "combo_sfi_defs_h"; |
| my $gf = $GEN_FLS{combo_sfi_defs_h}; |
| open (GFH, ">", $gf->path) or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print GFH ©right_file_header(); |
| print GFH &description_file_header($gf->name, $gf->description, $gf->owner); |
| print GFH &combo_sfi_defs_h_file_body(\%MAKEFILE_OPTIONS, \%CUSTOM_MEM_DEV_OPTIONS, \@MDL_INFO_LIST, \%COMM_MDL_INFO); |
| close GFH or &error_handler($gf->path.": $!", __FILE__, __LINE__); |
| print $gf->path, " is generated\n"; |
| } |
| |
| exit; |
| |
| #**************************************************************************** |
| # find the correct EMI database |
| #**************************************************************************** |
| sub Find_MDL |
| { |
| print("\n", (caller(0))[3], "\n"); |
| my $MDL_DIR = "tools/MemoryDeviceList/"; |
| my $platform = $MAKEFILE_OPTIONS{'platform'}; |
| my $ver = 0000; |
| |
| $MEMORY_DEVICE_LIST_XLS = ""; |
| $MEMORY_DEVICE_LIST_INT_XLS = ""; |
| |
| opendir(DIR, $MDL_DIR) or &error_handler("$MDL_DIR: $!", __FILE__, __LINE__);; |
| |
| if (defined($MAKEFILE_OPTIONS{'ram_support_type'}) && $MAKEFILE_OPTIONS{'ram_support_type'} eq 'NONE') { |
| $platform = $MAKEFILE_OPTIONS{'ram_support_type'}; |
| } |
| while (my $mdl = readdir(DIR)) { |
| if ($mdl =~ /MemoryDeviceList_$platform\_SinceW(\w+)\.xls/) { |
| if ($1 > $ver) { |
| $ver = $1; |
| $MEMORY_DEVICE_LIST_XLS = $MDL_DIR . $mdl; |
| } |
| } elsif ($mdl =~ /MemoryDeviceList_$platform\_Internal\.xls/) { |
| $MEMORY_DEVICE_LIST_INT_XLS = $MDL_DIR . $mdl; |
| } |
| } |
| |
| close(DIR); |
| |
| if ((! -e $MEMORY_DEVICE_LIST_XLS) && (! -e $MEMORY_DEVICE_LIST_INT_XLS)) { |
| &error_handler("MDL Excel is not exist for platform '$platform':$MEMORY_DEVICE_LIST_XLS and $MEMORY_DEVICE_LIST_INT_XLS", __FILE__, __LINE__); |
| } |
| |
| if ($DebugPrint == 1) { |
| print "custom memory device header file: $CUSTOM_MEMORY_DEVICE_HDR\n"; |
| print "MDL Excel: $MEMORY_DEVICE_LIST_XLS, Internal MDL Excel: $MEMORY_DEVICE_LIST_INT_XLS\n"; |
| print "Makefile: $THEMF\n"; |
| } |
| } |
| |
| #**************************************************************************** |
| # parse Project Makefile |
| #**************************************************************************** |
| sub Parse_Makefile |
| { |
| print("\n", (caller(0))[3], "\n"); |
| my @filelist = ($THEMF, undef); |
| my $keyname; |
| |
| foreach my $filename (@filelist) { |
| print "filename: $filename\n" if ($DebugPrint == 1); |
| open (FILE_HANDLE, "<$filename") or &error_handler("$filename: $!", __FILE__, __LINE__); |
| while (<FILE_HANDLE>) { |
| if (/^(\w+)\s*=\s*(\S+)/) { |
| $keyname = lc($1); |
| defined($MAKEFILE_OPTIONS{$keyname}) && warn "$1 redefined in $THEMF!\n"; |
| $MAKEFILE_OPTIONS{$keyname} = $2; |
| if ($keyname eq 'internal_feature_option') { |
| ($filelist[1] = $2) =~ s/\$WORKDIR/$ENV{WORKDIR}/; |
| } |
| print "$1 = $2\n" if ($DebugPrint == 1); |
| } |
| } |
| close (FILE_HANDLE); |
| } |
| |
| $MAKEFILE_OPTIONS{'platform'} = $MAKEFILE_OPTIONS{'platform_chip'} || 'MT6291'; |
| } |
| |
| #**************************************************************************** |
| # parse Memory Device |
| #**************************************************************************** |
| sub Parse_Memory_Device |
| { |
| print("\n", (caller(0))[3], "\n"); |
| |
| open CUSTOM_MEMORY_DEVICE_HDR, "<$CUSTOM_MEMORY_DEVICE_HDR" or &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: $!", __FILE__, __LINE__); |
| while (<CUSTOM_MEMORY_DEVICE_HDR>) |
| { |
| # error-checking |
| if ((/^#if|^#ifdef|^#ifndef|^#elif|^#else/) and !(/^#ifndef\s+__CUSTOM_MEMORYDEVICE__/)) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Not allowed to set conditional keywords $_ in custom_MemoryDevice.h!", __FILE__, __LINE__); |
| } |
| |
| if (/^#define\s+(\w+)\s+\(?([\w|\-]*)\)?/) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: $1 redefined in custom_MemoryDevice.h!", __FILE__, __LINE__) if defined($CUSTOM_MEM_DEV_OPTIONS{$1}); |
| $CUSTOM_MEM_DEV_OPTIONS{$1} = ((!defined $2) or ($2 eq ''))? 'TRUE': $2; |
| |
| my $option = $1; |
| my $content = $2; |
| if ($option =~ /COMBO_MEM(\d+)_CS(\d+)_PART_NUMBER/) |
| { |
| next if ((!defined $MAKEFILE_OPTIONS{'combo_memory_support'}) or ($MAKEFILE_OPTIONS{'combo_memory_support'} eq 'FALSE')); |
| print "$option = $content\n" if ($DebugPrint == 1); |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: COMBO_MEM_ENTRY_COUNT needs to be defined when COMBO_MEMORY_SUPPORT is turned on!", __FILE__, __LINE__) if (!defined $CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}); |
| my %TMP_PART_NUMBER; |
| my $mcp_idx = $1; |
| my $cs = $2; |
| $LPSDRAM_CHIP_SELECT = $cs; |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Only COMBO_MEM0n_CS0 or COMBO_MEM0n_CS1 is allowed!", __FILE__, __LINE__) if (($LPSDRAM_CHIP_SELECT != 0) && ($LPSDRAM_CHIP_SELECT != 1)); |
| $TMP_PART_NUMBER{$cs} = $content; |
| |
| if (defined $MCP_LIST[$mcp_idx]) |
| { |
| if (defined $MCP_LIST[$mcp_idx]->{$cs}) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: COMBO_MEM$mcp_idx\_CS$cs\_PART_NUMBER multiply defined!", __FILE__, __LINE__); |
| } |
| else |
| { |
| $MCP_LIST[$mcp_idx]->{$cs} = $TMP_PART_NUMBER{$cs}; |
| } |
| } |
| else |
| { |
| $MCP_LIST[$mcp_idx] = \%TMP_PART_NUMBER; |
| } |
| } |
| elsif ($option =~ /CS(\d+)_PART_NUMBER/) |
| { |
| next if ($MAKEFILE_OPTIONS{'combo_memory_support'} eq 'TRUE'); # when COMBO_MEMORY_SUPPORT is turned on, CSx_PART_NUMBER is ignored |
| print "$option = $content\n" if ($DebugPrint == 1); |
| my $cs = $1; |
| $LPSDRAM_CHIP_SELECT = $cs; |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Only COMBO_MEM0n_CS0 or COMBO_MEM0n_CS1 is allowed!", __FILE__, __LINE__) if (($LPSDRAM_CHIP_SELECT != 0) && ($LPSDRAM_CHIP_SELECT != 1)); |
| $PART_NUMBER{$cs} = $content; |
| } |
| } |
| } |
| close CUSTOM_MEMORY_DEVICE_HDR; |
| |
| $CUSTOM_MEM_DEV_OPTIONS{NOR_FDM4_ESB_PARAMETER_ERASE_QUEUE_SIZE} = (defined $CUSTOM_MEM_DEV_OPTIONS{NOR_FDM4_ESB_PARAMETER_ERASE_QUEUE_SIZE}) ? $CUSTOM_MEM_DEV_OPTIONS{NOR_FDM4_ESB_PARAMETER_ERASE_QUEUE_SIZE} : 5; |
| $CUSTOM_MEM_DEV_OPTIONS{NOR_PARAMETER_SYSTEM_DRIVE_RESERVED_BLOCK} = (defined $CUSTOM_MEM_DEV_OPTIONS{NOR_PARAMETER_SYSTEM_DRIVE_RESERVED_BLOCK}) ? $CUSTOM_MEM_DEV_OPTIONS{NOR_PARAMETER_SYSTEM_DRIVE_RESERVED_BLOCK} : 3; |
| |
| # No Combo MCP case |
| if ($MAKEFILE_OPTIONS{'combo_memory_support'} ne 'TRUE') |
| { |
| $MCP_LIST[1] = \%PART_NUMBER; |
| $CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT} = 1; |
| } |
| |
| # COMBO_MEM_ENTRY_COUNT and the number of COMBO_MEMxx_CSx_PART_NUMBER does not match |
| if ($CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT} != $#MCP_LIST) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: COMBO_MEM_ENTRY_COUNT and the number of COMBO_MEMxx_CSx_PART_NUMBER does not match!", __FILE__, __LINE__); |
| } |
| |
| ###Check MEMORY_DEVICE_TYPE correction |
| if (($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} !~ /$MAKEFILE_OPTIONS{'ram_support_type'}/) || |
| (($MAKEFILE_OPTIONS{'ram_support_type'} =~ /DDR$/) && ($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} =~ /DDR\d+/))) { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: ram type of MEMORY_DEVICE_TYPE ($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}) and ram_support_type ($MAKEFILE_OPTIONS{'ram_support_type'}) should be the same", __FILE__, __LINE__); |
| } |
| } |
| |
| #**************************************************************************** |
| # parse EMI database to get EMI settings |
| #**************************************************************************** |
| sub Parse_MDL |
| { |
| print("\n", (caller(0))[3], "\n"); |
| |
| my $result; |
| my %tmp_hash; |
| |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Incorrect memory device type!", __FILE__, __LINE__) unless $CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}; |
| |
| ##Parse DRAM Parameters |
| my $dram_sheet = $CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}; |
| if ($MAKEFILE_OPTIONS{'sip_ram_size'} ne 'NONE') { |
| $dram_sheet = 'SIP_' . $dram_sheet; |
| } |
| if ($emi_is_existed == 1) { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| $result = &get_info($MEMORY_DEVICE_LIST_XLS, $dram_sheet, $MCP_LIST[$_], \%tmp_hash); |
| if ($result ne 'TRUE') |
| { |
| print "INTERNAL FIND part number: $MCP_LIST[$_]->{0}, $MCP_LIST[$_]->{1}\n"; |
| $result = &get_info($MEMORY_DEVICE_LIST_INT_XLS, $dram_sheet, $MCP_LIST[$_], \%tmp_hash); |
| } |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Part Number $MCP_LIST[$_]->{0} not found!", __FILE__, __LINE__) if ($result ne 'TRUE'); |
| $MDL_INFO_LIST[$_] = Storable::dclone(\%tmp_hash); |
| } |
| } else { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| $result = &get_info($MEMORY_DEVICE_LIST_XLS, 'RAM', $MCP_LIST[$_], \%tmp_hash); |
| if ($result ne 'TRUE') |
| { |
| print "INTERNAL FIND part number: $MCP_LIST[$_]->{0}, $MCP_LIST[$_]->{1}\n"; |
| $result = &get_info($MEMORY_DEVICE_LIST_INT_XLS, 'RAM', $MCP_LIST[$_], \%tmp_hash); |
| } |
| &error_handler("Cannot find $MAKEFILE_OPTIONS{'platform'} in MDL!", __FILE__, __LINE__) if ($result ne 'TRUE'); |
| $MDL_INFO_LIST[$_] = Storable::dclone(\%tmp_hash); |
| } |
| } |
| |
| undef %tmp_hash; |
| ##Parse Flash Parameters |
| ###disctete type should parse flash info sheet |
| if (($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} !~ /\w+_\w+_MCP/) && (($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') || ($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE'))) |
| { |
| ###Parse Flash MDL info |
| |
| my $flash_sheet = ''; |
| if($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE')#sheet "SERIAL_FLASH" in MDL |
| { |
| $flash_sheet = 'SERIAL_FLASH'; |
| } |
| elsif($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE') |
| { |
| $flash_sheet = 'NAND_FLASH'; |
| } |
| |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| print "part number: $MCP_LIST[$_]->{0}, $MCP_LIST[$_]->{1}\n"; |
| $result = &get_info($MEMORY_DEVICE_LIST_XLS, $flash_sheet, $MCP_LIST[$_], \%tmp_hash); |
| if ($result ne 'TRUE') |
| { |
| print "INTERNAL FIND part number: $MCP_LIST[$_]->{0}, $MCP_LIST[$_]->{1}\n"; |
| $result = &get_info($MEMORY_DEVICE_LIST_INT_XLS, $flash_sheet, $MCP_LIST[$_], \%tmp_hash); |
| } |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: $flash_sheet Part Number $MCP_LIST[$_]->{1} not found!", __FILE__, __LINE__) if ($result ne 'TRUE'); |
| $MDL_INFO_LIST[$_]->{1} = Storable::dclone($tmp_hash{1}); |
| } |
| } |
| |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| &dump_mdl_info($MDL_INFO_LIST[$_], "\$MDL_INFO_LIST[$_]->"); |
| } |
| } |
| |
| #**************************************************************************** |
| # check emi clock driving config |
| #**************************************************************************** |
| sub check_emi_clk_driving_cfg |
| { |
| my ($emi_clk_driving, $bb_chip) = @_; |
| if ($bb_chip eq 'MT6290') |
| { |
| if (($emi_clk_driving->{'DRAMC_ACTIM0_VAL'} !~ /0x[0-9a-fA-F]{8,8}/) || ($emi_clk_driving->{'DRAMC_DRVCTL0_VAL'} !~ /0x[0-9a-fA-F]{8,8}/) || ($emi_clk_driving->{'DRAMC_DRVCTL1_VAL'} !~ /0x[0-9a-fA-F]{8,8}/)) |
| { |
| return 0; |
| } |
| } |
| elsif ($bb_chip eq 'MT6291') |
| { |
| if (($emi_clk_driving->{'DRAMC_ACTIM0_VAL'} !~ /0x[0-9a-fA-F]{8,8}/) || ($emi_clk_driving->{'DRAMC_IODRV8_VAL'} !~ /0x[0-9a-fA-F]{8,8}/) || ($emi_clk_driving->{'DRAMC_DRVCTL1_VAL'} !~ /0x[0-9a-fA-F]{8,8}/)) |
| { |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| #**************************************************************************** |
| # check consistency among FEATURE, MEMORY_DEVICE_TYPE, PLATFORM, MCU_CLOCK and MemoryDeviceList data |
| #**************************************************************************** |
| sub Decide_MemClockSpeed |
| { |
| print("\n", (caller(0))[3], "\n"); |
| |
| my $emi_force_clk = 0; |
| my $sfi_force_clk = 0; |
| if ((defined $CUSTOM_MEM_DEV_OPTIONS{EMI_CLK}) and $CUSTOM_MEM_DEV_OPTIONS{EMI_CLK} ne 'DEFAULT') |
| { |
| $emi_clk_config = $emi_force_clk = $CUSTOM_MEM_DEV_OPTIONS{EMI_CLK}; |
| } |
| if ((defined $CUSTOM_MEM_DEV_OPTIONS{SFI_CLK}) and $CUSTOM_MEM_DEV_OPTIONS{SFI_CLK}ne 'DEFAULT') |
| { |
| if ($CUSTOM_MEM_DEV_OPTIONS{SFI_CLK} eq '104M') |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: $MAKEFILE_OPTIONS{'platform'} does not support SFI clock as 104MHz! Please configure SFI_CLK as DEFAULT!", __FILE__, __LINE__) if ($BBtbl_SFI_FAST_CLK{$MAKEFILE_OPTIONS{'platform'}} != 104); |
| $sfi_clk_config = $sfi_force_clk = 104; |
| } |
| elsif ($CUSTOM_MEM_DEV_OPTIONS{SFI_CLK} eq '78M') |
| { |
| $sfi_clk_config = $sfi_force_clk = 78; |
| } |
| else |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please configure SFI_CLK as 104M, 78M, or DEFAULT!", __FILE__, __LINE__); |
| } |
| } |
| |
| if($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') |
| { |
| my $sfi_104_support = 1; # assume all devices can support 104; set as 0 if found not support |
| my $sfi_78_support = 1; # assume all devices can support 78; set as 0 if found not support |
| |
| #print "test $CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE}\n"; |
| ### Check if all devices can support the required clock |
| if ($sfi_force_clk != 0) # force specific clock |
| { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| if ((!defined &Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, $sfi_clk_config, $MAKEFILE_OPTIONS{'platform'}, 'SF_CTL', \@MDL_INFO_LIST)) or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, $sfi_clk_config, $MAKEFILE_OPTIONS{'platform'}, 'DRIVING', \@MDL_INFO_LIST) eq 'x') or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, $sfi_clk_config, $MAKEFILE_OPTIONS{'platform'}, 'DRIVING', \@MDL_INFO_LIST) eq ' ')) # unable to find the specified clock setting |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Device $_ not support $sfi_clk_config MHz settings!", __FILE__, __LINE__); |
| } |
| } |
| } |
| else |
| { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| #if ((!defined &Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 104, $MAKEFILE_OPTIONS{'platform'}, 'SF_CTL', \@MDL_INFO_LIST)) or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 104, $MAKEFILE_OPTIONS{'platform'}, 'SFI_MAC_CTL', \@MDL_INFO_LIST) eq 'x') or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 104, $MAKEFILE_OPTIONS{'platform'}, 'SFI_MAC_CTL', \@MDL_INFO_LIST) eq ' ')) # unable to find 104MHz clock setting |
| if (!defined &Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 104, $MAKEFILE_OPTIONS{'platform'}, 'SF_CTL', \@MDL_INFO_LIST)) |
| { |
| $sfi_104_support = 0; |
| } |
| #if ((!defined &Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 78, $MAKEFILE_OPTIONS{'platform'}, 'SF_CTL', \@MDL_INFO_LIST)) or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 78, $MAKEFILE_OPTIONS{'platform'}, 'SFI_MAC_CTL', \@MDL_INFO_LIST) eq 'x') or (&Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 78, $MAKEFILE_OPTIONS{'platform'}, 'SFI_MAC_CTL', \@MDL_INFO_LIST) eq ' ')) # unable to find 104MHz clock setting |
| if (!defined &Lookup_SFI_setting_by_IDX_CLK_BB_REG($_, 78, $MAKEFILE_OPTIONS{'platform'}, 'SF_CTL', \@MDL_INFO_LIST)) |
| { |
| $sfi_78_support = 0; |
| } |
| if (($sfi_104_support == 0) and ($sfi_78_support == 0)) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Unable to find valid SFI settings!", __FILE__, __LINE__); |
| } |
| elsif ($sfi_104_support != 0) |
| { |
| $sfi_clk_config = 104; |
| } |
| else # sfi_104_support == 0 and sfi_78_support != 0 |
| { |
| $sfi_clk_config = 78; |
| } |
| } |
| } |
| print "SFI_CLK configured as $sfi_clk_config\n" if ($DebugPrint == 1); |
| } |
| |
| if (($emi_is_existed == 1) and ($MAKEFILE_OPTIONS{'platform'} eq 'MT6291')) { |
| ### Check if all devices can support the required clock |
| if ($emi_force_clk != 0) # force specific clock |
| { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| my $mhz_emi_driving = $emi_clk_config . 'MHZ EMI Driving'; |
| my $emi_clk_driving = $MDL_INFO_LIST[$_]->{0}->{$MAKEFILE_OPTIONS{'platform'}}->{$mhz_emi_driving}; |
| if (&check_emi_clk_driving_cfg($emi_clk_driving, $MAKEFILE_OPTIONS{'platform'}) == 0) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Device $_ not support $emi_clk_config MHz settings!", __FILE__, __LINE__); |
| } |
| } |
| } |
| else |
| { |
| my %emi_clk; |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| my $mdl_info_platform = $MDL_INFO_LIST[$_]->{0}->{$MAKEFILE_OPTIONS{'platform'}}; |
| foreach my $mdl_info_content (sort keys %{$mdl_info_platform}) |
| { |
| if ($mdl_info_content =~ /(\d+)MHZ EMI Driving/) |
| { |
| if (!defined $emi_clk{$1}) |
| { |
| $emi_clk{$1} = 'TRUE'; |
| } |
| my $emi_clk_driving = $mdl_info_platform->{$mdl_info_content}; |
| if (&check_emi_clk_driving_cfg($emi_clk_driving, $MAKEFILE_OPTIONS{'platform'}) == 0) |
| { |
| $emi_clk{$1} = 'FALSE'; |
| } |
| } |
| } |
| } |
| undef $emi_clk_config; |
| while( (my $clk_speed, my $value) = each %emi_clk) |
| { |
| if ($value eq 'TRUE') |
| { |
| next if ((defined $emi_clk_config) && ($emi_clk_config >= $clk_speed)); |
| |
| $emi_clk_config = $clk_speed; |
| } |
| |
| } |
| if (!defined $emi_clk_config) { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Device $_ not support $emi_clk_config MHz settings!", __FILE__, __LINE__); |
| } |
| } |
| print "EMI_CLK configured as $emi_clk_config\n" if ($DebugPrint == 1); |
| } |
| } |
| |
| #**************************************************************************** |
| # subroutine: dump_mdl_info |
| # return: none |
| # input: $mdl_ref: MDL hash reference |
| # $pre_string: to print prefix string |
| #**************************************************************************** |
| sub dump_mdl_info |
| { |
| my ($mdl_ref, $pre_string) = @_; |
| my $prefix_string; |
| foreach my $key (keys %{$mdl_ref}) |
| { |
| $prefix_string = $pre_string if (defined $pre_string); |
| $prefix_string = $prefix_string . "{$key}"; |
| if (ref $mdl_ref->{$key} eq 'HASH') |
| { |
| &dump_mdl_info($mdl_ref->{$key}, "$prefix_string->"); |
| } |
| else |
| { |
| print "$prefix_string = " . $mdl_ref->{$key} . "\n"; |
| } |
| } |
| } |
| |
| #**************************************************************************** |
| # subroutine: fs_read_excel |
| # return: hash of matching rows and indexing rows |
| # input: $file: excel file to be read |
| # $sheet: sheet to open |
| # $target_href: the target patterns to be searched |
| #**************************************************************************** |
| sub fs_read_excel |
| { |
| my ($file, $sheet, $target_href, $BACKUP_MDL_PATH) = @_; |
| my %mdl_list; |
| my $copied_file; |
| my $curr_time_str = &get_CurrTime_str(); |
| my $WorkSheet; |
| my $Excel; |
| my $Book; |
| my $parser; |
| my $workbook; |
| my ($row_min, $row_max); |
| my ($col_min, $col_max); |
| |
| if (! -e $file) { |
| return %mdl_list; |
| } |
| |
| ### copy and rename the current excel file to prevent concurrency build problem |
| # remove ^.\ or ^\ |
| $BACKUP_MDL_PATH =~ s/^.\\|^\\//; |
| |
| if($BACKUP_MDL_PATH =~ /out/) |
| { |
| print "BAKCUP_MDL_PATH match with /build/ PREMATCH:$`, MATCH:$&, POSTMATCH:$'\n"; |
| $BACKUP_MDL_PATH = $& . $'; |
| } |
| print "file is $file\n"; |
| if($file =~ /^(\w+.*?)\.xls$/) |
| { |
| if($1 =~ /^(\w*.*?)tools(\w*.*?)MemoryDeviceList_(\w+)$/) |
| { |
| print "1:$1,2:$2,3:$3\n"; |
| $copied_file = $1 . $BACKUP_MDL_PATH . "\/". "MemoryDeviceList_" . $3; |
| } |
| } |
| $copied_file = $copied_file . "_" . $sheet . "_" . $curr_time_str . $$ . ".xls"; |
| File::Copy::copy($file, $copied_file); |
| $file = $copied_file; |
| |
| $parser = Spreadsheet::ParseExcel->new(); |
| $workbook = $parser->parse($file) or &error_handler("$file: $!", __FILE__, __LINE__);; |
| $WorkSheet = $workbook->worksheet($sheet); |
| ($row_min, $row_max) = $WorkSheet->row_range(); |
| ($col_min, $col_max) = $WorkSheet->col_range(); |
| |
| # get the sheet name |
| my $name = $WorkSheet->get_name(); |
| print "sheetname: $name, row: {$row_min, $row_max}, col: {$col_min, $col_max}\n"; |
| |
| my $xls_content_row_start; |
| my $xls_content_num; |
| for my $col ($col_min..$col_max) |
| { |
| my @mdl_each_col_content = undef; |
| my $array_content_row_start = undef; |
| foreach my $row ($row_min..$row_max) |
| { |
| if (($col == 0) && (!defined $WorkSheet->get_cell($row, $col)->is_merged()) && (!defined $xls_content_row_start)) |
| { |
| $xls_content_row_start = $row; |
| $xls_content_num = $row_max - $xls_content_row_start + 1; |
| } |
| if (((defined $xls_content_row_start) && ($row >= $xls_content_row_start)) || (!defined $mdl_each_col_content[-1]) || ($mdl_each_col_content[-1] ne &xls_cell_value($WorkSheet, $row, $col))) |
| { |
| push(@mdl_each_col_content, &xls_cell_value($WorkSheet, $row, $col)); |
| } |
| if ((defined $xls_content_row_start) && ($row == $xls_content_row_start)) |
| { |
| $array_content_row_start = $#mdl_each_col_content; |
| } |
| } |
| my @hash_tail_array; |
| my $hash_pointer; |
| for (1..$xls_content_num) |
| { |
| push(@hash_tail_array, \%{$mdl_list{$_}}); |
| } |
| print "col" if ($DebugPrint == 1); |
| foreach my $idx (1..$array_content_row_start-1) |
| { |
| my $data = $mdl_each_col_content[$idx]; |
| print "{$data}" if ($DebugPrint == 1); |
| for my $content_idx (1..$xls_content_num) |
| { |
| $hash_pointer = shift(@hash_tail_array); |
| if ($idx != $array_content_row_start-1) |
| { |
| print "->" if ($content_idx == 1) && ($DebugPrint == 1); |
| if (!defined $hash_pointer->{$data}) |
| { |
| $hash_pointer->{$data} = {}; |
| } |
| $hash_pointer = $hash_pointer->{$data}; |
| #print "[$idx][$content_idx]hash_pointer:$hash_pointer\n"; |
| } |
| push(@hash_tail_array, $hash_pointer); |
| } |
| } |
| print "=" if ($DebugPrint == 1); |
| foreach my $idx ($array_content_row_start..$#mdl_each_col_content) |
| { |
| my $mdl_idx = $idx - $array_content_row_start + 1; |
| my $data = $mdl_each_col_content[$idx]; |
| $hash_pointer = shift(@hash_tail_array); |
| $hash_pointer->{$mdl_each_col_content[$array_content_row_start-1]} = $data; |
| print "$mdl_idx:$data" if ($DebugPrint == 1); |
| if ($idx != $#mdl_each_col_content) |
| { |
| print ", " if ($DebugPrint == 1); |
| } |
| } |
| print "\n" if ($DebugPrint == 1); |
| } |
| |
| return %mdl_list; |
| } |
| |
| #**************************************************************************** |
| # subroutine: get_info |
| # input: $file: file path |
| # $sheet: sheet to open |
| # $target_href: the target patterns to be searched |
| # $href: output matching hash reference |
| #**************************************************************************** |
| sub get_info |
| { |
| my ($file, $sheet, $target_href, $href) = @_; |
| my %mdl_list; |
| |
| %mdl_list = &fs_read_excel($file, $sheet, $target_href, $LOAD_TMP_PATH); |
| |
| if (keys(%mdl_list) == 0) |
| { |
| print "get_info return FALSE!\n" if ($DebugPrint == 1); |
| return "FALSE"; |
| } |
| |
| foreach my $idx (keys %mdl_list) |
| { |
| if ($sheet =~ /\w+_\w+_MCP/) |
| { |
| if ($target_href->{0} eq $mdl_list{$idx}->{'Part Number'}) |
| { |
| $href->{0} = $mdl_list{$idx}->{'DRAM Parameters'}; |
| $href->{1} = $mdl_list{$idx}->{'Flash Parameters'}; |
| for my $keys (keys %{$mdl_list{$idx}}) |
| { |
| if (($keys ne 'DRAM Parameters') && ($keys ne 'Flash Parameters')) |
| { |
| for (0..1) |
| { |
| $href->{$_}->{$keys} = $mdl_list{$idx}->{$keys}; |
| } |
| } |
| } |
| } |
| } |
| else |
| { |
| my $tgt = 0; |
| $tgt = $tgt + 1 if ($sheet =~ /\w+_FLASH/); |
| if ($target_href->{$tgt} eq $mdl_list{$idx}->{'Part Number'}) |
| { |
| $href->{$tgt} = $mdl_list{$idx}; |
| } |
| } |
| } |
| &dump_mdl_info($href, "\$href->") if ($DebugPrint == 1); |
| |
| if (keys(%{$href}) == 0) |
| { |
| return "FALSE"; |
| } |
| |
| return "TRUE"; |
| } |
| |
| #**************************************************************************** |
| # subroutine: xls_cell_value |
| # return: excel cell value no matter it's in merge area or not |
| # input: $sheet: specified Excel Sheet |
| # $row: specified row number |
| # $col: specified column number |
| #**************************************************************************** |
| sub xls_cell_value |
| { |
| my ($sheet, $row, $col) = @_; |
| |
| my $cell = $sheet->get_cell($row, $col); |
| if ($cell) |
| { |
| if ((defined $cell->is_merged()) && ($cell->is_merged() == 1)) |
| { |
| my $mareas =$sheet->get_merged_areas(); |
| # get merged areas' value if cell is merged |
| for (0..$#$mareas) |
| { |
| if(($row >= $mareas->[$_]->[0] && $row <= $mareas->[$_]->[2]) && ($col >= $mareas->[$_]->[1] && $col <= $mareas->[$_]->[3])) |
| { |
| return $sheet->get_cell($mareas->[$_]->[0], $mareas->[$_]->[1])->value(); |
| } |
| } |
| } else { |
| # cell is not merged cell => get cell value |
| return $cell->value(); |
| } |
| } else { |
| my $value; |
| return $value; |
| } |
| } |
| |
| #**************************************************************************** |
| # subroutine: dependency check |
| # return: None |
| #**************************************************************************** |
| sub Check_ManualCheckIn |
| { |
| my ($target, $force_del_new_file, @depends) = @_; |
| |
| return unless (-e $target); |
| |
| ## Now check if the $target file check-in or auto-gen |
| ## Read whole file ## |
| open SRC_FILE_R, "<$target" or &error_handler("$target: file error!", __FILE__, __LINE__); |
| local $/; |
| my $reading = <SRC_FILE_R>; |
| close SRC_FILE_R; |
| |
| ## Look for check-in pattern ## |
| if ($reading =~ /MANUAL-CHECKIN/i) |
| { |
| print "$target: Check-in message is found. No need to update.\n"; |
| return; |
| } |
| |
| unlink $target if (-e $target); |
| return; |
| } |
| |
| #**************************************************************************** |
| # subroutine: CheckConfigValid |
| # return: None |
| #**************************************************************************** |
| sub CheckConfigValid |
| { |
| print("\n", (caller(0))[3], "\n"); |
| |
| my $dram_size = eval($MDL_INFO_LIST[1]->{0}->{'Density (Mb)'}); |
| |
| ###Check DRAM Size |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| if ($emi_is_existed == 1) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please select correct dram! dram_size is $dram_size.", __FILE__, __LINE__) if ((!defined $dram_size) || ($dram_size <= 0)); |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please select dram with the same size ($dram_size vs. $MDL_INFO_LIST[$_]->{0}->{'Density (Mb)'}) when COMBO_MEMORY_SUPPORT is enabled!", __FILE__, __LINE__) if ($dram_size ne eval($MDL_INFO_LIST[$_]->{0}->{'Density (Mb)'})); |
| } |
| } |
| |
| ###Check Combo Memory Supporting |
| if($MAKEFILE_OPTIONS{'combo_memory_support'} eq 'TRUE') |
| { |
| my @combo_mem_part_number; |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: MEMORY_DEVICE_TYPE supports only XXX_MCP when COMBO_MEMORY_SUPPORT is enabled!", __FILE__, __LINE__) if ((($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} !~ /\w+_MCP/) && ($CUSTOM_MEM_DEV_OPTIONS{MEMORY_DEVICE_TYPE} ne 'NONE')) && ($MAKEFILE_OPTIONS{'sip_ram_size'} eq "NONE")); |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: COMBO MEM Part Number ($MCP_LIST[$_]->{0}) of DRAM should be the same that ($MCP_LIST[$_]->{1}) of Flash!", __FILE__, __LINE__) if (($MCP_LIST[$_]->{0} ne $MCP_LIST[$_]->{1}) && ($MAKEFILE_OPTIONS{'sip_ram_size'} eq "NONE")); |
| for my $combo_mem_idx (0..$#combo_mem_part_number) |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Each COMBO MEM Part Number should be difference ($combo_mem_part_number[$combo_mem_idx]:COMBO_MEM0$combo_mem_idx and COMBO_MEM0$_)!", __FILE__, __LINE__) if ($MCP_LIST[$_]->{1} eq $combo_mem_part_number[$combo_mem_idx]); |
| } |
| push(@combo_mem_part_number, $MCP_LIST[$_]->{1}); |
| } |
| } |
| |
| ###Combo Flash Size Should be same |
| if($MAKEFILE_OPTIONS{'combo_memory_support'} eq 'TRUE') |
| { |
| if($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') |
| { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| my $cur_nor_size_Mb; |
| $cur_nor_size_Mb = $MDL_INFO_LIST[$_]->{1}->{'Size (Mb)'}; |
| if (!defined $nor_size_Mb) |
| { |
| $nor_size_Mb = $cur_nor_size_Mb; |
| } |
| else |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please select flash with the same size when COMBO_MEMORY_SUPPORT is enabled!", __FILE__, __LINE__) if ($nor_size_Mb != $cur_nor_size_Mb); |
| } |
| } |
| } |
| elsif($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE') |
| { |
| my $nand_size_Mb; |
| my $nand_block_size; |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| my $cur_nand_size_Mb; |
| my $cur_nand_block_size; |
| $cur_nand_size_Mb = $MDL_INFO_LIST[$_]->{1}->{'NAND Size(MB)'}; |
| $cur_nand_block_size = $MDL_INFO_LIST[$_]->{1}->{'NAND Block Size(KB)'}; |
| if (!defined $nand_size_Mb) |
| { |
| $nand_size_Mb = $cur_nand_size_Mb; |
| $nand_block_size = $cur_nand_block_size; |
| } |
| else |
| { |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please select flash with the same size when COMBO_MEMORY_SUPPORT is enabled!", __FILE__, __LINE__) if ($nand_size_Mb != $cur_nand_size_Mb); |
| &error_handler("$CUSTOM_MEMORY_DEVICE_HDR: Please select flash with the same block size when COMBO_MEMORY_SUPPORT is enabled!", __FILE__, __LINE__) if ($nand_block_size != $cur_nand_block_size); |
| } |
| } |
| } |
| } |
| |
| ###Serail Flash Support and NAND Support Should Not be TRUE at the same time |
| if(($MAKEFILE_OPTIONS{'serial_flash_support'} eq 'TRUE') and ($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE')) |
| { |
| &error_handler("Serial Flash and NAND Flash Support at the same time, please check makefile setting!!", __FILE__, __LINE__); |
| } |
| |
| ###The Flash Name max length is 64 |
| if($MAKEFILE_OPTIONS{'nand_support'} eq 'TRUE') |
| { |
| for (1..$CUSTOM_MEM_DEV_OPTIONS{COMBO_MEM_ENTRY_COUNT}) |
| { |
| my $vendor = uc($MDL_INFO_LIST[$_]->{1}->{'Vendor'}); |
| my $PartNumber = $MDL_INFO_LIST[$_]->{1}->{'Part Number'}; |
| my $flash_name .= "$vendor " if (defined $vendor); |
| $flash_name .= "$PartNumber" if (defined $PartNumber); |
| my $name_length = length($flash_name); |
| if($name_length > 64) |
| { |
| &error_handler("Flash Name is too long, DA Support Max Length is 64 byte!!", __FILE__, __LINE__); |
| } |
| } |
| } |
| |
| return; |
| } |
| |
| #**************************************************************************** |
| # subroutine: error_handler |
| # input: $error_msg: error message |
| #**************************************************************************** |
| sub error_handler |
| { |
| my ($error_msg, $file, $line_no) = @_; |
| my $final_error_msg = "EMIGEN ERROR: $error_msg at $file line $line_no\n"; |
| print $final_error_msg; |
| die $final_error_msg; |
| } |
| |
| #**************************************************************************** |
| # subroutine: copyright_file_header |
| # return: file header -- copyright |
| #**************************************************************************** |
| sub copyright_file_header |
| { |
| my $template = <<"__TEMPLATE"; |
| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2019 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| __TEMPLATE |
| |
| return $template; |
| } |
| |
| #**************************************************************************** |
| # subroutine: description_file_header |
| # return: file header -- description |
| # input: $filename: filename |
| # input: $description: one line description |
| # input: $author: optional |
| #**************************************************************************** |
| sub description_file_header |
| { |
| my ($filename, $description, $author) = @_; |
| my $src_file = (-e $MEMORY_DEVICE_LIST_XLS)? $MEMORY_DEVICE_LIST_XLS: |
| (-e $MEMORY_DEVICE_LIST_INT_XLS)? $MEMORY_DEVICE_LIST_INT_XLS: |
| __FILE__; |
| my $datetime = POSIX::strftime("%Y/%m/%d_%H:%M:%S", localtime((stat $src_file)[9])); |
| |
| my $template = <<"__TEMPLATE"; |
| /***************************************************************************** |
| * |
| * Filename: |
| * --------- |
| * $filename |
| * |
| * Project: |
| * -------- |
| * MOLY |
| * |
| * Description: |
| * ------------ |
| * $description |
| * |
| * Author: |
| * ------- |
| * $author by emigen $EMIGEN_VERNO |
| * |
| * Memory Device database last modified on $datetime |
| * |
| *============================================================================ |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * \$Revision\$ |
| * \$Modtime\$ |
| * \$Log\$ |
| * |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================ |
| ****************************************************************************/ |
| |
| __TEMPLATE |
| |
| return $template; |
| } |
| |
| #****************************************************************************** |
| # subroutine: get_CurrTime_str |
| # return: string of the current time |
| # input: None |
| #****************************************************************************** |
| sub get_CurrTime_str |
| { |
| my($sec, $min, $hour, $mday, $mon, $year) = localtime(time); |
| return (sprintf "%04d_%02d_%02d_%02d_%02d_%02d", $year+1900, $mon+1, $mday, $hour, $min, $sec); |
| } |
| |
| #**************************************************************************** |
| # subroutine: SCHEME Configure Routines :: Query :: MD Information |
| #**************************************************************************** |
| sub query_MD_INFO |
| { |
| my ($MAKEFILE_OPTIONS_LOCAL,$CUSTOM_MEM_DEV_OPTIONS_LOCAL,$COMM_MDL_INFO_LOCAL) = @_; |
| open write_file, ">", "MD_INFO.txt" or &error_handler("MD_INFO.txt: $!", __FILE__, __LINE__); |
| #if(($CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'} = 'LPDDR') || ($CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'} = 'LPDDR2') || ($CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'} = 'LPSDRAM')) |
| #{ |
| #if(defined $MAKEFILE_OPTIONS{'sip_ram_size'}) |
| #{ |
| #print write_file "Memory device type:$CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'}"; |
| #print write_file "size:$COMM_MDL_INFO{1}->{'Size (Mb)'}" |
| #} |
| #else |
| #{ |
| #print write_file "Memory device type:$CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'}"; |
| #print write_file "size:$COMM_MDL_INFO{1}->{'Size (Mb)'}" |
| #} |
| |
| #} |
| #else |
| #{ |
| #if(defined $MAKEFILE_OPTIONS{'sip_ram_size'}) |
| #{ |
| #print write_file "Memory device type:$CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'}"; |
| #print write_file "size:$COMM_MDL_INFO{1}->{'Size (Mb)'}" |
| #} |
| #else |
| #{ |
| #print write_file "Memory device type:$CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'}"; |
| #print write_file "size:$COMM_MDL_INFO{1}->{'Size (Mb)'}" |
| #} |
| #} |
| |
| print write_file "Memory device type:$CUSTOM_MEM_DEV_OPTIONS{'MEMORY_DEVICE_TYPE'}\n"; |
| print write_file "size:$COMM_MDL_INFO{1}->{'Size (Mb)'}\n"; |
| close(write_file); |
| } |
| |
| #**************************************************************************** |
| # subroutine: Parse Custom Feature Configuration |
| #**************************************************************************** |
| sub Parse_custom_FeatureConfig |
| { |
| print("\n", (caller(0))[3], "\n"); |
| |
| open CUSTOM_FEATURE_CONFIG_HDR, "<$CUSTOM_FEATURE_CONFIG_HDR" or &error_handler("$CUSTOM_FEATURE_CONFIG_HDR: $!", __FILE__, __LINE__); |
| while (<CUSTOM_FEATURE_CONFIG_HDR>) |
| { |
| # error-checking |
| if ((/^#if|^#ifdef|^#ifndef|^#elif|^#else/) && !(/^#ifndef\s+__CUSTOM_FEATURECONFIG_H__/)) |
| { |
| &error_handler("$CUSTOM_FEATURE_CONFIG_HDR: Not allowed to set conditional keywords $_ in custom_FeatureConfig.h!", __FILE__, __LINE__); |
| } |
| |
| if (/^#define\s+(\w+)\s+\(?([\w|\-]*)\)?/) |
| { |
| &error_handler("$CUSTOM_FEATURE_CONFIG_HDR: $1 redefined in custom_FeatureConfig.h!", __FILE__, __LINE__) if defined($CUSTOM_FEATURE_CFG_OPTIONS{$1}); |
| $CUSTOM_FEATURE_CFG_OPTIONS{$1} = ((!defined $2) or ($2 eq ''))? 'TRUE': $2; |
| } |
| } |
| close CUSTOM_FEATURE_CONFIG_HDR; |
| } |
| |
| return 1; |