| /* | 
 |  * Synopsys G210 Test Chip driver | 
 |  * | 
 |  * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) | 
 |  * | 
 |  * Authors: Joao Pinto <jpinto@synopsys.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include "ufshcd.h" | 
 | #include "ufshcd-dwc.h" | 
 | #include "tc-dwc-g210.h" | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/pm_runtime.h> | 
 |  | 
 | /* Test Chip type expected values */ | 
 | #define TC_G210_20BIT 20 | 
 | #define TC_G210_40BIT 40 | 
 | #define TC_G210_INV 0 | 
 |  | 
 | static int tc_type = TC_G210_INV; | 
 | module_param(tc_type, int, 0); | 
 | MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)"); | 
 |  | 
 | static int tc_dwc_g210_pci_suspend(struct device *dev) | 
 | { | 
 | 	return ufshcd_system_suspend(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | static int tc_dwc_g210_pci_resume(struct device *dev) | 
 | { | 
 | 	return ufshcd_system_resume(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | static int tc_dwc_g210_pci_runtime_suspend(struct device *dev) | 
 | { | 
 | 	return ufshcd_runtime_suspend(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | static int tc_dwc_g210_pci_runtime_resume(struct device *dev) | 
 | { | 
 | 	return ufshcd_runtime_resume(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | static int tc_dwc_g210_pci_runtime_idle(struct device *dev) | 
 | { | 
 | 	return ufshcd_runtime_idle(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | /** | 
 |  * struct ufs_hba_dwc_vops - UFS DWC specific variant operations | 
 |  */ | 
 | static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = { | 
 | 	.name                   = "tc-dwc-g210-pci", | 
 | 	.link_startup_notify	= ufshcd_dwc_link_startup_notify, | 
 | }; | 
 |  | 
 | /** | 
 |  * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state | 
 |  * @pdev: pointer to PCI device handle | 
 |  */ | 
 | static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev) | 
 | { | 
 | 	ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); | 
 | } | 
 |  | 
 | /** | 
 |  * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space | 
 |  *		data structure memory | 
 |  * @pdev - pointer to PCI handle | 
 |  */ | 
 | static void tc_dwc_g210_pci_remove(struct pci_dev *pdev) | 
 | { | 
 | 	struct ufs_hba *hba = pci_get_drvdata(pdev); | 
 |  | 
 | 	pm_runtime_forbid(&pdev->dev); | 
 | 	pm_runtime_get_noresume(&pdev->dev); | 
 | 	ufshcd_remove(hba); | 
 | } | 
 |  | 
 | /** | 
 |  * tc_dwc_g210_pci_probe - probe routine of the driver | 
 |  * @pdev: pointer to PCI device handle | 
 |  * @id: PCI device id | 
 |  * | 
 |  * Returns 0 on success, non-zero value on failure | 
 |  */ | 
 | static int | 
 | tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | 
 | { | 
 | 	struct ufs_hba *hba; | 
 | 	void __iomem *mmio_base; | 
 | 	int err; | 
 |  | 
 | 	/* Check Test Chip type and set the specific setup routine */ | 
 | 	if (tc_type == TC_G210_20BIT) { | 
 | 		tc_dwc_g210_pci_hba_vops.phy_initialization = | 
 | 						tc_dwc_g210_config_20_bit; | 
 | 	} else if (tc_type == TC_G210_40BIT) { | 
 | 		tc_dwc_g210_pci_hba_vops.phy_initialization = | 
 | 						tc_dwc_g210_config_40_bit; | 
 | 	} else { | 
 | 		dev_err(&pdev->dev, "test chip version not specified\n"); | 
 | 		return -EPERM; | 
 | 	} | 
 |  | 
 | 	err = pcim_enable_device(pdev); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "pcim_enable_device failed\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); | 
 | 	if (err < 0) { | 
 | 		dev_err(&pdev->dev, "request and iomap failed\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	mmio_base = pcim_iomap_table(pdev)[0]; | 
 |  | 
 | 	err = ufshcd_alloc_host(&pdev->dev, &hba); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Allocation failed\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	hba->vops = &tc_dwc_g210_pci_hba_vops; | 
 |  | 
 | 	err = ufshcd_init(hba, mmio_base, pdev->irq); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Initialization failed\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	pci_set_drvdata(pdev, hba); | 
 | 	pm_runtime_put_noidle(&pdev->dev); | 
 | 	pm_runtime_allow(&pdev->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = { | 
 | 	.suspend	= tc_dwc_g210_pci_suspend, | 
 | 	.resume		= tc_dwc_g210_pci_resume, | 
 | 	.runtime_suspend = tc_dwc_g210_pci_runtime_suspend, | 
 | 	.runtime_resume  = tc_dwc_g210_pci_runtime_resume, | 
 | 	.runtime_idle    = tc_dwc_g210_pci_runtime_idle, | 
 | }; | 
 |  | 
 | static const struct pci_device_id tc_dwc_g210_pci_tbl[] = { | 
 | 	{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 
 | 	{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 
 | 	{ }	/* terminate list */ | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl); | 
 |  | 
 | static struct pci_driver tc_dwc_g210_pci_driver = { | 
 | 	.name = "tc-dwc-g210-pci", | 
 | 	.id_table = tc_dwc_g210_pci_tbl, | 
 | 	.probe = tc_dwc_g210_pci_probe, | 
 | 	.remove = tc_dwc_g210_pci_remove, | 
 | 	.shutdown = tc_dwc_g210_pci_shutdown, | 
 | 	.driver = { | 
 | 		.pm = &tc_dwc_g210_pci_pm_ops | 
 | 	}, | 
 | }; | 
 |  | 
 | module_pci_driver(tc_dwc_g210_pci_driver); | 
 |  | 
 | MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); | 
 | MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); |