| /* | 
 |  * OMAP7xx SPI 100k controller driver | 
 |  * Author: Fabrice Crohas <fcrohas@gmail.com> | 
 |  * from original omap1_mcspi driver | 
 |  * | 
 |  * Copyright (C) 2005, 2006 Nokia Corporation | 
 |  * Author:      Samuel Ortiz <samuel.ortiz@nokia.com> and | 
 |  *              Juha Yrj�l� <juha.yrjola@nokia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 | #include <linux/device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/err.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/io.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <linux/spi/spi.h> | 
 |  | 
 | #define OMAP1_SPI100K_MAX_FREQ          48000000 | 
 |  | 
 | #define ICR_SPITAS      (OMAP7XX_ICR_BASE + 0x12) | 
 |  | 
 | #define SPI_SETUP1      0x00 | 
 | #define SPI_SETUP2      0x02 | 
 | #define SPI_CTRL        0x04 | 
 | #define SPI_STATUS      0x06 | 
 | #define SPI_TX_LSB      0x08 | 
 | #define SPI_TX_MSB      0x0a | 
 | #define SPI_RX_LSB      0x0c | 
 | #define SPI_RX_MSB      0x0e | 
 |  | 
 | #define SPI_SETUP1_INT_READ_ENABLE      (1UL << 5) | 
 | #define SPI_SETUP1_INT_WRITE_ENABLE     (1UL << 4) | 
 | #define SPI_SETUP1_CLOCK_DIVISOR(x)     ((x) << 1) | 
 | #define SPI_SETUP1_CLOCK_ENABLE         (1UL << 0) | 
 |  | 
 | #define SPI_SETUP2_ACTIVE_EDGE_FALLING  (0UL << 0) | 
 | #define SPI_SETUP2_ACTIVE_EDGE_RISING   (1UL << 0) | 
 | #define SPI_SETUP2_NEGATIVE_LEVEL       (0UL << 5) | 
 | #define SPI_SETUP2_POSITIVE_LEVEL       (1UL << 5) | 
 | #define SPI_SETUP2_LEVEL_TRIGGER        (0UL << 10) | 
 | #define SPI_SETUP2_EDGE_TRIGGER         (1UL << 10) | 
 |  | 
 | #define SPI_CTRL_SEN(x)                 ((x) << 7) | 
 | #define SPI_CTRL_WORD_SIZE(x)           (((x) - 1) << 2) | 
 | #define SPI_CTRL_WR                     (1UL << 1) | 
 | #define SPI_CTRL_RD                     (1UL << 0) | 
 |  | 
 | #define SPI_STATUS_WE                   (1UL << 1) | 
 | #define SPI_STATUS_RD                   (1UL << 0) | 
 |  | 
 | /* use PIO for small transfers, avoiding DMA setup/teardown overhead and | 
 |  * cache operations; better heuristics consider wordsize and bitrate. | 
 |  */ | 
 | #define DMA_MIN_BYTES                   8 | 
 |  | 
 | #define SPI_RUNNING	0 | 
 | #define SPI_SHUTDOWN	1 | 
 |  | 
 | struct omap1_spi100k { | 
 | 	struct clk              *ick; | 
 | 	struct clk              *fck; | 
 |  | 
 | 	/* Virtual base address of the controller */ | 
 | 	void __iomem            *base; | 
 | }; | 
 |  | 
 | struct omap1_spi100k_cs { | 
 | 	void __iomem            *base; | 
 | 	int                     word_len; | 
 | }; | 
 |  | 
 | static void spi100k_enable_clock(struct spi_master *master) | 
 | { | 
 | 	unsigned int val; | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	/* enable SPI */ | 
 | 	val = readw(spi100k->base + SPI_SETUP1); | 
 | 	val |= SPI_SETUP1_CLOCK_ENABLE; | 
 | 	writew(val, spi100k->base + SPI_SETUP1); | 
 | } | 
 |  | 
 | static void spi100k_disable_clock(struct spi_master *master) | 
 | { | 
 | 	unsigned int val; | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	/* disable SPI */ | 
 | 	val = readw(spi100k->base + SPI_SETUP1); | 
 | 	val &= ~SPI_SETUP1_CLOCK_ENABLE; | 
 | 	writew(val, spi100k->base + SPI_SETUP1); | 
 | } | 
 |  | 
 | static void spi100k_write_data(struct spi_master *master, int len, int data) | 
 | { | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	/* write 16-bit word, shifting 8-bit data if necessary */ | 
 | 	if (len <= 8) { | 
 | 		data <<= 8; | 
 | 		len = 16; | 
 | 	} | 
 |  | 
 | 	spi100k_enable_clock(master); | 
 | 	writew(data , spi100k->base + SPI_TX_MSB); | 
 |  | 
 | 	writew(SPI_CTRL_SEN(0) | | 
 | 	       SPI_CTRL_WORD_SIZE(len) | | 
 | 	       SPI_CTRL_WR, | 
 | 	       spi100k->base + SPI_CTRL); | 
 |  | 
 | 	/* Wait for bit ack send change */ | 
 | 	while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE) | 
 | 		; | 
 | 	udelay(1000); | 
 |  | 
 | 	spi100k_disable_clock(master); | 
 | } | 
 |  | 
 | static int spi100k_read_data(struct spi_master *master, int len) | 
 | { | 
 | 	int dataH, dataL; | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	/* Always do at least 16 bits */ | 
 | 	if (len <= 8) | 
 | 		len = 16; | 
 |  | 
 | 	spi100k_enable_clock(master); | 
 | 	writew(SPI_CTRL_SEN(0) | | 
 | 	       SPI_CTRL_WORD_SIZE(len) | | 
 | 	       SPI_CTRL_RD, | 
 | 	       spi100k->base + SPI_CTRL); | 
 |  | 
 | 	while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD) | 
 | 		; | 
 | 	udelay(1000); | 
 |  | 
 | 	dataL = readw(spi100k->base + SPI_RX_LSB); | 
 | 	dataH = readw(spi100k->base + SPI_RX_MSB); | 
 | 	spi100k_disable_clock(master); | 
 |  | 
 | 	return dataL; | 
 | } | 
 |  | 
 | static void spi100k_open(struct spi_master *master) | 
 | { | 
 | 	/* get control of SPI */ | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	writew(SPI_SETUP1_INT_READ_ENABLE | | 
 | 	       SPI_SETUP1_INT_WRITE_ENABLE | | 
 | 	       SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1); | 
 |  | 
 | 	/* configure clock and interrupts */ | 
 | 	writew(SPI_SETUP2_ACTIVE_EDGE_FALLING | | 
 | 	       SPI_SETUP2_NEGATIVE_LEVEL | | 
 | 	       SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2); | 
 | } | 
 |  | 
 | static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable) | 
 | { | 
 | 	if (enable) | 
 | 		writew(0x05fc, spi100k->base + SPI_CTRL); | 
 | 	else | 
 | 		writew(0x05fd, spi100k->base + SPI_CTRL); | 
 | } | 
 |  | 
 | static unsigned | 
 | omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | 
 | { | 
 | 	struct omap1_spi100k_cs *cs = spi->controller_state; | 
 | 	unsigned int            count, c; | 
 | 	int                     word_len; | 
 |  | 
 | 	count = xfer->len; | 
 | 	c = count; | 
 | 	word_len = cs->word_len; | 
 |  | 
 | 	if (word_len <= 8) { | 
 | 		u8              *rx; | 
 | 		const u8        *tx; | 
 |  | 
 | 		rx = xfer->rx_buf; | 
 | 		tx = xfer->tx_buf; | 
 | 		do { | 
 | 			c -= 1; | 
 | 			if (xfer->tx_buf != NULL) | 
 | 				spi100k_write_data(spi->master, word_len, *tx++); | 
 | 			if (xfer->rx_buf != NULL) | 
 | 				*rx++ = spi100k_read_data(spi->master, word_len); | 
 | 		} while (c); | 
 | 	} else if (word_len <= 16) { | 
 | 		u16             *rx; | 
 | 		const u16       *tx; | 
 |  | 
 | 		rx = xfer->rx_buf; | 
 | 		tx = xfer->tx_buf; | 
 | 		do { | 
 | 			c -= 2; | 
 | 			if (xfer->tx_buf != NULL) | 
 | 				spi100k_write_data(spi->master, word_len, *tx++); | 
 | 			if (xfer->rx_buf != NULL) | 
 | 				*rx++ = spi100k_read_data(spi->master, word_len); | 
 | 		} while (c); | 
 | 	} else if (word_len <= 32) { | 
 | 		u32             *rx; | 
 | 		const u32       *tx; | 
 |  | 
 | 		rx = xfer->rx_buf; | 
 | 		tx = xfer->tx_buf; | 
 | 		do { | 
 | 			c -= 4; | 
 | 			if (xfer->tx_buf != NULL) | 
 | 				spi100k_write_data(spi->master, word_len, *tx); | 
 | 			if (xfer->rx_buf != NULL) | 
 | 				*rx = spi100k_read_data(spi->master, word_len); | 
 | 		} while (c); | 
 | 	} | 
 | 	return count - c; | 
 | } | 
 |  | 
 | /* called only when no transfer is active to this device */ | 
 | static int omap1_spi100k_setup_transfer(struct spi_device *spi, | 
 | 		struct spi_transfer *t) | 
 | { | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); | 
 | 	struct omap1_spi100k_cs *cs = spi->controller_state; | 
 | 	u8 word_len; | 
 |  | 
 | 	if (t != NULL) | 
 | 		word_len = t->bits_per_word; | 
 | 	else | 
 | 		word_len = spi->bits_per_word; | 
 |  | 
 | 	if (spi->bits_per_word > 32) | 
 | 		return -EINVAL; | 
 | 	cs->word_len = word_len; | 
 |  | 
 | 	/* SPI init before transfer */ | 
 | 	writew(0x3e , spi100k->base + SPI_SETUP1); | 
 | 	writew(0x00 , spi100k->base + SPI_STATUS); | 
 | 	writew(0x3e , spi100k->base + SPI_CTRL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* the spi->mode bits understood by this driver: */ | 
 | #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) | 
 |  | 
 | static int omap1_spi100k_setup(struct spi_device *spi) | 
 | { | 
 | 	int                     ret; | 
 | 	struct omap1_spi100k    *spi100k; | 
 | 	struct omap1_spi100k_cs *cs = spi->controller_state; | 
 |  | 
 | 	spi100k = spi_master_get_devdata(spi->master); | 
 |  | 
 | 	if (!cs) { | 
 | 		cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); | 
 | 		if (!cs) | 
 | 			return -ENOMEM; | 
 | 		cs->base = spi100k->base + spi->chip_select * 0x14; | 
 | 		spi->controller_state = cs; | 
 | 	} | 
 |  | 
 | 	spi100k_open(spi->master); | 
 |  | 
 | 	clk_prepare_enable(spi100k->ick); | 
 | 	clk_prepare_enable(spi100k->fck); | 
 |  | 
 | 	ret = omap1_spi100k_setup_transfer(spi, NULL); | 
 |  | 
 | 	clk_disable_unprepare(spi100k->ick); | 
 | 	clk_disable_unprepare(spi100k->fck); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int omap1_spi100k_transfer_one_message(struct spi_master *master, | 
 | 					      struct spi_message *m) | 
 | { | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 | 	struct spi_device *spi = m->spi; | 
 | 	struct spi_transfer *t = NULL; | 
 | 	int cs_active = 0; | 
 | 	int status = 0; | 
 |  | 
 | 	list_for_each_entry(t, &m->transfers, transfer_list) { | 
 | 		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { | 
 | 			status = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		status = omap1_spi100k_setup_transfer(spi, t); | 
 | 		if (status < 0) | 
 | 			break; | 
 |  | 
 | 		if (!cs_active) { | 
 | 			omap1_spi100k_force_cs(spi100k, 1); | 
 | 			cs_active = 1; | 
 | 		} | 
 |  | 
 | 		if (t->len) { | 
 | 			unsigned count; | 
 |  | 
 | 			count = omap1_spi100k_txrx_pio(spi, t); | 
 | 			m->actual_length += count; | 
 |  | 
 | 			if (count != t->len) { | 
 | 				status = -EIO; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (t->delay_usecs) | 
 | 			udelay(t->delay_usecs); | 
 |  | 
 | 		/* ignore the "leave it on after last xfer" hint */ | 
 |  | 
 | 		if (t->cs_change) { | 
 | 			omap1_spi100k_force_cs(spi100k, 0); | 
 | 			cs_active = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	status = omap1_spi100k_setup_transfer(spi, NULL); | 
 |  | 
 | 	if (cs_active) | 
 | 		omap1_spi100k_force_cs(spi100k, 0); | 
 |  | 
 | 	m->status = status; | 
 |  | 
 | 	spi_finalize_current_message(master); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static int omap1_spi100k_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct spi_master       *master; | 
 | 	struct omap1_spi100k    *spi100k; | 
 | 	int                     status = 0; | 
 |  | 
 | 	if (!pdev->id) | 
 | 		return -EINVAL; | 
 |  | 
 | 	master = spi_alloc_master(&pdev->dev, sizeof(*spi100k)); | 
 | 	if (master == NULL) { | 
 | 		dev_dbg(&pdev->dev, "master allocation failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	if (pdev->id != -1) | 
 | 		master->bus_num = pdev->id; | 
 |  | 
 | 	master->setup = omap1_spi100k_setup; | 
 | 	master->transfer_one_message = omap1_spi100k_transfer_one_message; | 
 | 	master->num_chipselect = 2; | 
 | 	master->mode_bits = MODEBITS; | 
 | 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); | 
 | 	master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16); | 
 | 	master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ; | 
 | 	master->auto_runtime_pm = true; | 
 |  | 
 | 	spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	/* | 
 | 	 * The memory region base address is taken as the platform_data. | 
 | 	 * You should allocate this with ioremap() before initializing | 
 | 	 * the SPI. | 
 | 	 */ | 
 | 	spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev); | 
 |  | 
 | 	spi100k->ick = devm_clk_get(&pdev->dev, "ick"); | 
 | 	if (IS_ERR(spi100k->ick)) { | 
 | 		dev_dbg(&pdev->dev, "can't get spi100k_ick\n"); | 
 | 		status = PTR_ERR(spi100k->ick); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	spi100k->fck = devm_clk_get(&pdev->dev, "fck"); | 
 | 	if (IS_ERR(spi100k->fck)) { | 
 | 		dev_dbg(&pdev->dev, "can't get spi100k_fck\n"); | 
 | 		status = PTR_ERR(spi100k->fck); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	status = clk_prepare_enable(spi100k->ick); | 
 | 	if (status != 0) { | 
 | 		dev_err(&pdev->dev, "failed to enable ick: %d\n", status); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	status = clk_prepare_enable(spi100k->fck); | 
 | 	if (status != 0) { | 
 | 		dev_err(&pdev->dev, "failed to enable fck: %d\n", status); | 
 | 		goto err_ick; | 
 | 	} | 
 |  | 
 | 	pm_runtime_enable(&pdev->dev); | 
 | 	pm_runtime_set_active(&pdev->dev); | 
 |  | 
 | 	status = devm_spi_register_master(&pdev->dev, master); | 
 | 	if (status < 0) | 
 | 		goto err_fck; | 
 |  | 
 | 	return status; | 
 |  | 
 | err_fck: | 
 | 	clk_disable_unprepare(spi100k->fck); | 
 | err_ick: | 
 | 	clk_disable_unprepare(spi100k->ick); | 
 | err: | 
 | 	spi_master_put(master); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int omap1_spi100k_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	pm_runtime_disable(&pdev->dev); | 
 |  | 
 | 	clk_disable_unprepare(spi100k->fck); | 
 | 	clk_disable_unprepare(spi100k->ick); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int omap1_spi100k_runtime_suspend(struct device *dev) | 
 | { | 
 | 	struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 |  | 
 | 	clk_disable_unprepare(spi100k->ick); | 
 | 	clk_disable_unprepare(spi100k->fck); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int omap1_spi100k_runtime_resume(struct device *dev) | 
 | { | 
 | 	struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); | 
 | 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master); | 
 | 	int ret; | 
 |  | 
 | 	ret = clk_prepare_enable(spi100k->ick); | 
 | 	if (ret != 0) { | 
 | 		dev_err(dev, "Failed to enable ick: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(spi100k->fck); | 
 | 	if (ret != 0) { | 
 | 		dev_err(dev, "Failed to enable fck: %d\n", ret); | 
 | 		clk_disable_unprepare(spi100k->ick); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static const struct dev_pm_ops omap1_spi100k_pm = { | 
 | 	SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend, | 
 | 			   omap1_spi100k_runtime_resume, NULL) | 
 | }; | 
 |  | 
 | static struct platform_driver omap1_spi100k_driver = { | 
 | 	.driver = { | 
 | 		.name		= "omap1_spi100k", | 
 | 		.pm		= &omap1_spi100k_pm, | 
 | 	}, | 
 | 	.probe		= omap1_spi100k_probe, | 
 | 	.remove		= omap1_spi100k_remove, | 
 | }; | 
 |  | 
 | module_platform_driver(omap1_spi100k_driver); | 
 |  | 
 | MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver"); | 
 | MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>"); | 
 | MODULE_LICENSE("GPL"); |